{
  "model_key": "inkling",
  "display_name": "Inkling",
  "provider": "thinkingmachines",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Inkling answered the 50 tasks in three rollouts through OpenRouter's chat completions route (thinkingmachines/inkling) at maximum reasoning effort. Requests set temperature to 0 and max_tokens to 471,859, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Inkling on 2026-11-10 ($1.00 input, $0.17 cached input, $4.05 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 50,
          "incorrect_count": 100,
          "partial_credit_count": 57,
          "zero_count": 43,
          "mean_score_0_to_4": 1.9466666666666668,
          "score_percent": 48.66666666666667,
          "score_distribution": {
            "0": 43,
            "1": 31,
            "2": 17,
            "3": 9,
            "4": 50
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 50,
          "incorrect_count": 100,
          "partial_credit_count": 57,
          "zero_count": 43,
          "mean_score_0_to_4": 1.9466666666666668,
          "score_percent": 48.66666666666667,
          "score_distribution": {
            "0": 43,
            "1": 31,
            "2": 17,
            "3": 9,
            "4": 50
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 40,
          "incorrect_count": 50,
          "partial_credit_count": 15,
          "zero_count": 35,
          "mean_score_0_to_4": 2.0555555555555554,
          "score_percent": 51.388888888888886,
          "score_distribution": {
            "0": 35,
            "1": 7,
            "2": 6,
            "3": 2,
            "4": 40
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 40,
          "incorrect_count": 50,
          "partial_credit_count": 15,
          "zero_count": 35,
          "mean_score_0_to_4": 2.0555555555555554,
          "score_percent": 51.388888888888886,
          "score_distribution": {
            "0": 35,
            "1": 7,
            "2": 6,
            "3": 2,
            "4": 40
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 10,
          "incorrect_count": 50,
          "partial_credit_count": 42,
          "zero_count": 8,
          "mean_score_0_to_4": 1.7833333333333334,
          "score_percent": 44.583333333333336,
          "score_distribution": {
            "0": 8,
            "1": 24,
            "2": 11,
            "3": 7,
            "4": 10
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 10,
          "incorrect_count": 50,
          "partial_credit_count": 42,
          "zero_count": 8,
          "mean_score_0_to_4": 1.7833333333333334,
          "score_percent": 44.583333333333336,
          "score_distribution": {
            "0": 8,
            "1": 24,
            "2": 11,
            "3": 7,
            "4": 10
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 18,
        "incorrect_count": 32,
        "partial_credit_count": 19,
        "zero_count": 13,
        "mean_score_0_to_4": 1.98,
        "score_percent": 49.5,
        "score_distribution": {
          "0": 13,
          "1": 12,
          "2": 6,
          "3": 1,
          "4": 18
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 14,
        "incorrect_count": 36,
        "partial_credit_count": 20,
        "zero_count": 16,
        "mean_score_0_to_4": 1.7,
        "score_percent": 42.5,
        "score_distribution": {
          "0": 16,
          "1": 13,
          "2": 5,
          "3": 2,
          "4": 14
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 18,
        "incorrect_count": 32,
        "partial_credit_count": 18,
        "zero_count": 14,
        "mean_score_0_to_4": 2.16,
        "score_percent": 54.0,
        "score_distribution": {
          "0": 14,
          "1": 6,
          "2": 6,
          "3": 6,
          "4": 18
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 3328,
        "input_tokens": 279046,
        "output_tokens": 2725552,
        "total_tokens": 3004598
      },
      "known_totals": {
        "cached_input_tokens": 3328,
        "input_tokens": 279046,
        "output_tokens": 2725552,
        "total_tokens": 3004598
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 15,
          "incorrect_count": 15,
          "partial_credit_count": 4,
          "zero_count": 11,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 11,
            "1": 2,
            "2": 2,
            "4": 15
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 11,
          "incorrect_count": 19,
          "partial_credit_count": 6,
          "zero_count": 13,
          "mean_score_0_to_4": 1.7333333333333334,
          "score_percent": 43.333333333333336,
          "score_distribution": {
            "0": 13,
            "1": 4,
            "2": 2,
            "4": 11
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 14,
          "incorrect_count": 16,
          "partial_credit_count": 5,
          "zero_count": 11,
          "mean_score_0_to_4": 2.2333333333333334,
          "score_percent": 55.833333333333336,
          "score_distribution": {
            "0": 11,
            "1": 1,
            "2": 2,
            "3": 2,
            "4": 14
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 3,
          "incorrect_count": 17,
          "partial_credit_count": 15,
          "zero_count": 2,
          "mean_score_0_to_4": 1.65,
          "score_percent": 41.25,
          "score_distribution": {
            "0": 2,
            "1": 10,
            "2": 4,
            "3": 1,
            "4": 3
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 3,
          "incorrect_count": 17,
          "partial_credit_count": 14,
          "zero_count": 3,
          "mean_score_0_to_4": 1.65,
          "score_percent": 41.25,
          "score_distribution": {
            "0": 3,
            "1": 9,
            "2": 3,
            "3": 2,
            "4": 3
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 4,
          "incorrect_count": 16,
          "partial_credit_count": 13,
          "zero_count": 3,
          "mean_score_0_to_4": 2.05,
          "score_percent": 51.24999999999999,
          "score_distribution": {
            "0": 3,
            "1": 5,
            "2": 4,
            "3": 4,
            "4": 4
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is\n\n\\[\nA_0 = g_m r_o\n\\]\n\nwhere  \n- \\(g_m \\propto W/L\\) (square-law) or \\(\\propto W\\) (velocity-saturated)  \n- \\(r_o \\approx \\dfrac{1}{\\lambda I_D}\\) with \\(\\lambda \\propto 1/L\\).\n\nBecause both \\(W\\) and \\(L\\) are doubled, \\(W/L\\) stays the same, so for the same overdrive \\(V_{OV}\\):\n\n- **Transconductance \\(g_m\\)** is essentially unchanged (long-channel) or scales with \\(W\\) (short-channel).\n- **Output resistance \\(r_o\\)** scales with \\(L/I_D\\). Since \\(I_D \\propto W/L\\) (square-law) or \\(\\propto W\\) (velocity saturation), in either case \\(r_o\\) ends up scaling by a factor of **2** (or staying constant while \\(g_m\\) doubles).\n\nPutting them together:\n\n\\[\nA_0 \\propto L\n\\]\n\nThe width \\(W\\) cancels out. So doubling \\(L\\) doubles the gain, regardless of \\(W\\).\n\n**Answer:** The intrinsic gain **doubles** (increases by a factor of 2). \n\nMore generally, \\(A_0 \\approx \\dfrac{2V_A}{V_{OV}} \\propto L\\), so intrinsic gain depends mainly on channel length, not on width.",
        "format": "markdown",
        "sha256": "78ee69fce4e65000e925b79948db63c6e571c4fb51a6292c52bb10b3f46de2a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain doubles and explains the scaling: at fixed overdrive, either gm stays constant while ro doubles, or gm doubles while ro stays constant. This is consistent with the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 8857,
        "total_tokens": 8892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 8857,
        "total_tokens": 8892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8527,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain is  \n\n\\[\nA_0 = g_m r_o\n\\]\n\nFor a MOSFET in saturation (square-law, long-channel):\n\n- **Transconductance:**  \n  \\[\n  g_m = \\mu C_{ox}\\frac{W}{L}V_{ov} = \\frac{2I_D}{V_{ov}}\n  \\]\n  So \\(g_m \\propto W/L\\).\n\n- **Drain current:**  \n  \\[\n  I_D \\approx \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{ov}^2\n  \\]\n  So if \\(W\\) and \\(L\\) are both doubled, \\(W/L\\) is unchanged \\(\\Rightarrow I_D\\) is unchanged (for the same \\(V_{ov}\\)). Hence **\\(g_m\\) does not change**.\n\n- **Output resistance:**  \n  Channel-length modulation gives \\(\\lambda \\propto 1/L\\), so  \n  \\[\n  r_o = \\frac{1}{\\lambda I_D} \\propto L\n  \\]\n  Doubling \\(L\\) halves \\(\\lambda\\), thus **\\(r_o\\) doubles** (with \\(I_D\\) constant).\n\nTherefore\n\n\\[\nA_0 = g_m r_o \\;\\Rightarrow\\; \\text{unchanged } g_m \\times 2r_o = 2A_0\n\\]\n\nMore generally, \\(A_0 \\approx \\dfrac{2V_A}{V_{ov}}\\) with \\(V_A = 1/\\lambda \\propto L\\), so the gain is directly proportional to \\(L\\) and independent of \\(W\\).\n\n**Answer:** The intrinsic gain **doubles** (increases by a factor of 2). Doubling the width has no effect because \\(W/L\\) and the bias current stay the same; only the longer channel improves \\(r_o\\).",
        "format": "markdown",
        "sha256": "eefbdd4a7c00d2abaa27bc11082fbce06ed35f1d5ea7974a4594d2fbec9376f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that, at fixed overdrive, doubling both dimensions leaves W/L, drain current, and gm approximately unchanged while doubling ro through the longer channel, so intrinsic gain approximately doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1342,
        "total_tokens": 1377,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1342,
        "total_tokens": 1377,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain is  \n\n\\[\nA_0 = g_m r_o\n\\]\n\nFor a MOSFET in saturation (ignoring short-channel effects for the scaling argument):\n\n- \\(g_m \\approx \\mu C_{ox}\\frac{W}{L}V_{ov}\\)\n- \\(I_D \\approx \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{ov}^2\\)\n- Channel-length modulation: \\(\\lambda \\propto \\frac{1}{L}\\), so  \n  \\(r_o \\approx \\frac{1}{\\lambda I_D} \\propto \\frac{L}{I_D}\\)\n\nPutting them together:\n\n\\[\nA_0 = g_m r_o \\approx \\frac{2}{\\lambda V_{ov}} \\propto \\frac{L}{V_{ov}}\n\\]\n\nMore specifically, using the Early-voltage formulation \\(V_A = V_{A0}L\\):\n\n\\[\nA_0 \\approx \\frac{2V_{A0}L}{V_{ov}}\n\\]\n\n**Key point:** \\(W\\) cancels out; only \\(L\\) matters.\n\nSo if you **double both W and L**:\n\n- \\(W/L\\) stays the same \\(\\Rightarrow I_D\\) and \\(g_m\\) are unchanged (for the same \\(V_{ov}\\)).\n- \\(L\\) doubles \\(\\Rightarrow \\lambda\\) is halved \\(\\Rightarrow r_o\\) doubles.\n\nTherefore\n\n\\[\nA_0 \\rightarrow 2A_0\n\\]\n\n**Answer: The intrinsic gain doubles (increases by a factor of 2).** Doubling the width has no effect; the improvement comes entirely from the doubled channel length.",
        "format": "markdown",
        "sha256": "b607da072446930138fc6141e0709834fec4349cf43fb6ec44ce79a0554406b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L, gm, and ID approximately unchanged, while the longer channel roughly doubles ro and thus intrinsic gain, assuming constant overdrive.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1389,
        "total_tokens": 1424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1012,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1389,
        "total_tokens": 1424,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1012,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **Student A is right** for the usual case (saturation, long-channel square-law), but there are important caveats.\n\n### 1. Saturation region (the “normal” amplifier region)\nFor a long-channel MOSFET:\n\\[\nI_D = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2\n\\]\nThe overdrive is \\(V_{OV}=V_{GS}-V_{TH}\\).  \nTransconductance:\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nSo **\\(g_m\\) is directly proportional to \\(V_{OV}\\)** — it goes **up** linearly as overdrive increases.\n\nAlso:\n\\[\n\\frac{g_m}{I_D} = \\frac{2}{V_{OV}}\n\\]\nThat ratio goes *down* with larger \\(V_{OV}\\), which is sometimes the source of confusion.\n\n### 2. Triode (linear) region\n\\[\nI_D \\approx \\mu C_{ox}\\frac{W}{L}\\left[(V_{GS}-V_{TH})V_{DS}-\\frac{V_{DS}^2}{2}\\right]\n\\]\n\\[\ng_m = \\mu C_{ox}\\frac{W}{L}V_{DS}\n\\]\nHere \\(g_m\\) depends on \\(V_{DS}\\), **not on \\(V_{OV}\\)** — it neither goes up nor down with overdrive.\n\n### 3. Short-channel / velocity-saturation regime\nAt very high fields:\n\\[\ng_m \\approx \\frac{W v_{sat}C_{ox}}{\\left[1+\\frac{V_{OV}}{E_c L}\\right]^2}\n\\]\n- For modest \\(V_{OV}\\): \\(g_m\\) is roughly constant.\n- For very large \\(V_{OV} \\gg E_c L\\): \\(g_m\\) actually **falls** as \\(1/V_{OV}\\).\n\nSo Student B is only correct in that extreme short-channel, high-overdrive limit.\n\n---\n\n**Bottom line:** In standard textbook analysis (saturation, square-law), **Student A is correct** — increasing overdrive increases \\(g_m\\). Student B may be thinking of \\(g_m/I_D\\) or of velocity-saturated devices at very high overdrive.",
        "format": "markdown",
        "sha256": "14b4daef34b865f18e00d1d56957388643d32cdc3b3e27a652ff5c81cb4eae37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies Student A for a fixed-size, long-channel MOSFET and derives that gm rises linearly with VOV. The extra regime caveats are unnecessary but do not undermine the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 47,
        "output_tokens": 2950,
        "total_tokens": 2997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 47,
        "output_tokens": 2950,
        "total_tokens": 2997,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer **depends on what is being held constant**—but in the most direct sense **Student A is right**, while Student B is right in the very common “fixed-current” bias situation.\n\n### 1. Constant geometry (W/L fixed) → **A is correct**\nIn saturation (square-law):\n\n\\[\nI_D = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2 = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{OV}^2\n\\]\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nSo if you just raise the overdrive \\(V_{OV}=V_{GS}-V_{TH}\\) with the same transistor size, \\(g_m\\) **increases linearly** with \\(V_{OV}\\).\n\n---\n\n### 2. Constant drain current \\(I_D\\) (common in analog biasing) → **B is correct**\nIf \\(I_D\\) is fixed and you increase \\(V_{OV}\\), you must shrink \\(W/L\\) (since \\(I_D \\propto (W/L)V_{OV}^2\\)). Then\n\n\\[\ng_m = \\frac{2I_D}{V_{OV}}\n\\]\n\nSo with \\(I_D\\) held constant, **\\(g_m\\) falls** as \\(V_{OV}\\) rises.\n\nThis is also why the **transconductance efficiency** \\(g_m/I_D = 2/V_{OV}\\) always decreases with larger overdrive—moving from weak/moderate inversion (low \\(V_{OV}\\), high \\(g_m/I_D\\)) into strong inversion (high \\(V_{OV}\\), low \\(g_m/I_D\\)).\n\n---\n\n### Bottom line\n- **Direct derivative at fixed W/L:** \\(g_m \\uparrow\\) with \\(V_{OV}\\) → **Student A**.\n- **Fixed bias current (design context):** \\(g_m \\downarrow\\) with \\(V_{OV}\\) → **Student B**.\n\nIf the question is about the intrinsic device equation, **A wins**. If it’s about analog design trade-offs (\\(g_m/I_D\\)), **B describes the practical trend**.",
        "format": "markdown",
        "sha256": "4d417636da3bcd56e3fa513d16866d0ab48ab7b4c65e7ef93c88ff6234f90354"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size and explains that gm increases with overdrive; it also correctly notes Student B's fixed-current condition. The extra gm/ID discussion is secondary.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 47,
        "output_tokens": 1250,
        "total_tokens": 1297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 47,
        "output_tokens": 1250,
        "total_tokens": 1297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 741,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer depends on **what you hold constant** while the overdrive \\(V_{OV}=V_{GS}-V_{TH}\\) changes.\n\n### 1. Saturation, square-law model\n\\[\nI_D \\approx \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{OV}^2\n\\]\n\nThe transconductance is\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\n- **If \\(W/L\\) and \\(V_{DS}\\) are fixed** and you just raise \\(V_{GS}\\) (so \\(V_{OV}\\) goes up), then \\(I_D\\) also rises and  \n  \\[\n  g_m \\propto V_{OV}\n  \\]\n  → **Student A is correct**: \\(g_m\\) increases linearly with overdrive.\n\nBut analog designers often care about the **same drain current** \\(I_D\\).\n\n- **If \\(I_D\\) is fixed** (you change \\(W/L\\) or bias to keep current constant), then\n  \\[\n  V_{OV} = \\sqrt{\\frac{2I_D}{\\mu C_{ox}(W/L)}}\n  \\]\n  and substituting into \\(g_m\\) gives\n  \\[\n  g_m = \\frac{2I_D}{V_{OV}}\n  \\]\n  So for a given \\(I_D\\):\n  \\[\n  g_m \\propto \\frac{1}{V_{OV}}\n  \\]\n  → **Student B is correct**: a larger overdrive means **lower** transconductance (and lower \\(g_m/I_D\\)).\n\nThis is the classic design trade-off: to get more \\(g_m\\) per unit current, operate with a **small** \\(V_{OV}\\) (closer to weak/moderate inversion).\n\n### 2. Other regions/models\n- **Triode (linear) region**: \\(g_m \\approx \\mu C_{ox}(W/L)V_{DS}\\), which does **not** depend on \\(V_{OV}\\) at all (as long as you stay in triode).\n- **Short-channel / velocity saturation**: \\(g_m\\) eventually saturates near \\(W v_{sat}C_{ox}\\), so raising \\(V_{OV}\\) further stops increasing it.\n\n### Bottom line\n- **Sweeping \\(V_{GS}\\) with fixed device**: \\(g_m\\) goes **up** with \\(V_{OV}\\) (A).\n- **Fixed \\(I_D\\) (the usual design comparison)**: \\(g_m\\) goes **down** as \\(V_{OV}\\) increases (B).\n\nSo **both can be right**, but in the common analog-design context where current is fixed, **Student B is correct**: higher overdrive gives lower \\(g_m\\) (\\(g_m = 2I_D/V_{OV}\\)).",
        "format": "markdown",
        "sha256": "77ced24e15fe4a5d566c50d62aaf03030eb5de100d108d5c2db12838ea78b6c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that raising overdrive raises both drain current and gm. It also correctly limits Student B’s result to a fixed-current comparison; the added design-context discussion does not change the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 47,
        "output_tokens": 2275,
        "total_tokens": 2322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 47,
        "output_tokens": 2275,
        "total_tokens": 2322,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nYes—the **topology and the parameter values** ( \\(g_m\\), \\(r_o\\), \\(g_{mb}\\), \\(C_{gs}\\), \\(C_{gd}\\), etc. ) are the same. The only differences are the **reference directions** of the DC currents/voltages and the sign convention you choose for the controlling voltage (\\(V_{SG}\\) vs. \\(V_{GS}\\)).\n\n---\n\n### 1. Why they look the same\n\n| NMOS | PMOS (magnitude form) |\n|------|----------------------|\n| \\(I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{thn})^2(1+\\lambda V_{DS})\\) | \\(|I_D| = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}(V_{SG}-|V_{thp}|)^2(1+\\lambda V_{SD})\\) |\n| Controlled by \\(V_{GS}\\) | Controlled by \\(V_{SG}=V_S-V_G\\) |\n| Current enters **drain**, leaves **source** | Current enters **source**, leaves **drain** |\n\nIf you linearize the PMOS equation around its bias point and define the small-signal increments as\n\n\\[\nv_{sg}=v_s-v_g=-v_{gs},\\qquad v_{sd}=v_s-v_d=-v_{ds},\\qquad v_{sb}=v_s-v_b=-v_{bs},\n\\]\n\nyou get exactly the same linearized relations as for NMOS:\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o} + g_{mb}v_{bs}\n\\]\n\nwhere\n\n\\[\ng_m = \\mu_p C_{ox}\\frac{W}{L}(V_{SG,Q}-|V_{thp}|),\\qquad\nr_o = \\frac{1}{\\lambda |I_{D,Q}|}.\n\\]\n\nSo with the **standard convention** (all small-signal currents entering the device, all voltages measured with respect to the source: \\(v_{gs},v_{ds},v_{bs}\\)), the PMOS small-signal equation is **formally identical** to the NMOS one. The fact that \\(v_{gs}\\) is negative in the PMOS active region automatically makes the current-source term point in the correct (source→drain) direction.\n\n---\n\n### 2. The equivalent circuit\n\nThe hybrid-π (or T) model is drawn the same way for both:\n\n- **Voltage-controlled current source** between D and S: \\(g_m v_{gs}\\) (or \\(g_m v_{sg}\\) if you flip the reference).\n- **Output resistance** \\(r_o\\) (or \\(r_{ds}\\)) between D and S.\n- **Body-effect source** \\(g_{mb}v_{bs}\\) between B and S (present if source and body are not AC-shorted).\n- **Capacitances:** \\(C_{gs}, C_{gd}, C_{gb}, C_{sb}, C_{db}\\) with the same physical expressions.\n\nIf you prefer every incremental control variable to be **positive** when the device turns on harder, you can replace\n\n\\[\nv_{gs}\\to v_{sg}=-v_{gs},\\qquad v_{ds}\\to v_{sd}=-v_{ds},\n\\]\n\nand reverse the arrow of the current source. The circuit is then literally the NMOS model with all node labels and supply references swapped.\n\n---\n\n### 3. Practical differences to keep in mind\n\n| Issue | NMOS | PMOS |\n|-------|------|------|\n| **Well / body connection** | Body = p-substrate (usually AC ground) | Body = n-well (usually tied to \\(V_{DD}\\), AC ground) |\n| **Sign of \\(v_{gs}\\) in saturation** | Positive | Negative |\n| **Current direction (conventional)** | D → S | S → D |\n| **Small-signal parameter values** | Depend on \\(\\mu_n, V_{GS}-V_{thn}\\) | Depend on \\(\\mu_p, V_{SG}-|V_{thp}|\\) |\n\nBecause of these sign/polarity differences, in hand analysis of CMOS circuits (e.g., a common-source PMOS amplifier) we often say: *“Replace the PMOS by an NMOS small-signal model after reversing all DC supply and ground references.”*\n\n---\n\n### Bottom line\n\nThe **small-signal model itself is identical** in form, parameters, and topology. You do not need a different circuit diagram—only pay attention to whether you are using \\(v_{GS}\\) or \\(v_{SG}\\) and to the correct direction of conventional current. If you apply the same reference directions (\\(v_{gs}, v_{ds}, v_{bs}\\) with respect to the source), the equations are exactly the same; the “opposite” behavior of the PMOS is captured automatically by the negative bias values of \\(v_{gs}\\).",
        "format": "markdown",
        "sha256": "ea1c6972ee46f9375ba4208e3931a93ba5a9bf5313f86be0e6f00ce37246e79b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly answers that the PMOS small-signal model has the same form and topology as the NMOS model, with polarity and reference conventions handled appropriately. This meets the explicit full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 6678,
        "total_tokens": 6713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 6678,
        "total_tokens": 6713,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nYes—the *topology* of the small-signal (linearized) equivalent circuit is exactly the same for PMOS and NMOS. The only differences are **(1)** the sign/polarity conventions for the controlling voltages and currents, and **(2)** the numerical values of the parameters (μₚ, |Vₜₕₚ|, λₚ, γₚ).\n\n---\n\n### 1. The unified small-signal equations\n\nIf you consistently define all small-signal quantities **entering the device** with respect to the source:\n\n- \\(v_{GS}=v_G-v_S\\)\n- \\(v_{DS}=v_D-v_S\\)\n- \\(v_{BS}=v_B-v_S\\)\n- \\(i_D\\) = small-signal current **entering the drain**\n\nthen linearizing the square-law (or more general) I–V characteristic gives for **both** devices:\n\n\\[\n\\boxed{i_D = g_m v_{GS} + \\frac{v_{DS}}{r_o} + g_{mbs}\\,v_{BS}}\n\\]\n\nwith\n\n\\[\ni_G = i_B = 0\n\\]\n\nSo the circuit model is always:\n\n- Infinite impedance between G and S (and G and B)\n- A voltage-controlled current source \\(g_m v_{GS}\\) between D and S\n- An output resistance \\(r_o\\) between D and S\n- (If body effect is included) A second source \\(g_{mbs}v_{BS}\\) between D and S\n\n---\n\n### 2. Where the “differences” appear\n\n| Feature | NMOS | PMOS |\n|---|---|---|\n| **DC bias polarities** | \\(V_{GS},V_{DS}>0\\) | \\(V_{SG},V_{SD}>0\\) ⇒ \\(V_{GS},V_{DS}<0\\) |\n| **Current direction** | Enters drain, leaves source | Enters source, leaves drain ⇒ \\(I_D<0\\) (entering drain) |\n| **Transconductance** | \\(g_m = \\mu_n C_{ox}\\frac{W}{L}|V_{ovn}|\\) | \\(g_m = \\mu_p C_{ox}\\frac{W}{L}|V_{ovp}|\\) |\n| **Output resistance** | \\(r_o = \\frac{1}{\\lambda_n |I_D|}\\) | \\(r_o = \\frac{1}{\\lambda_p |I_D|}\\) |\n| **Body-effect coefficient** | \\(\\gamma_n >0\\) ⇒ \\(g_{mbs}>0\\) | \\(\\gamma_p <0\\) ⇒ \\(g_{mbs}<0\\) (using the same \\(v_{BS}\\) formula) |\n| **Controlling voltage (physical view)** | \\(v_{gs}\\) (gate up ⇒ more current) | \\(v_{sg}\\) (gate down ⇒ more \\(|I_D|\\)) |\n\nBecause PMOS bias values are negative, it is common to rewrite the PMOS model in terms of **positive** small-signal variables:\n\n\\[\nv_{SG} = -v_{GS},\\quad v_{SD} = -v_{DS}\n\\]\n\nThen the current leaving the source (or entering the source) is expressed with the same functional form. Many textbooks state this as: *“The PMOS small-signal model is identical to the NMOS model except that all voltages and currents have opposite polarities.”*\n\n---\n\n### 3. Practical circuit-analysis rule\n\nWhen you draw the small-signal equivalent for a PMOS transistor in a circuit:\n\n- You may use **the exact same symbol/diagram** as for NMOS.\n- Replace \\(v_{GS}\\) with \\(v_{SG}\\) (or keep \\(v_{GS}\\) but remember it is negative for the bias point).\n- Replace \\(v_{DS}\\) with \\(v_{SD}\\) if you prefer positive increments.\n- Use \\(\\mu_p\\), \\(|V_{thp}|\\), and \\(\\lambda_p\\) to compute \\(g_m\\) and \\(r_o\\).\n- Watch the sign of the body-effect term: if you use \\(v_{BS}=v_B-v_S\\) with the unified equation above, \\(g_{mbs}\\) is negative for PMOS.\n\n---\n\n### Bottom line\n\nThe small-signal model is **not a different circuit**; it is the same linear two-port (plus body-effect source). You do not need a separate “PMOS small-signal model” in your toolkit—just apply the NMOS model with the correct sign conventions and PMOS parameter values.",
        "format": "markdown",
        "sha256": "dc2ea6ffb4525204a1727fb1bde027b3f2c44e4587d7e5e5fa2d68109dcdc6ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity and sign conventions adjusted, meeting the golden full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 7874,
        "total_tokens": 7909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 7874,
        "total_tokens": 7909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nThe *circuit topology* is the same, but the *sign conventions* for the controlling voltages and current directions are reversed (or must be defined consistently with the source terminal). If you write the PMOS equations in terms of **v_SG**, **v_SD**, and **v_SB**, the model is literally identical in form to the NMOS model written with **v_GS**, **v_DS**, and **v_BS**.\n\n---\n\n### 1. Why they are “the same”\n\nA PMOS is the complement of an NMOS. If you flip all DC voltage polarities and reverse all current directions, an NMOS becomes a PMOS. Applying the same transformation to the linearized (small-signal) equations gives the PMOS small-signal relations.\n\nFor an NMOS in saturation:\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o} + g_{mb}v_{bs}\n\\]\nwith a current source from drain to source controlled by \\(v_{gs}\\).\n\nFor a PMOS in saturation (\\(I_D\\) leaving the source, entering the drain with opposite sign convention):\n\\[\ni_d = g_m v_{sg} + \\frac{v_{sd}}{r_o} + g_{mb}v_{sb}\n\\]\n\nSo the **parameters** have the exact same formulas:\n\\[\ng_m = \\mu_p C_{ox}\\frac{W}{L}|V_{OV}| = \\sqrt{2\\mu_p C_{ox}\\frac{W}{L}|I_D|}\n\\]\n\\[\nr_o = \\frac{1}{\\lambda |I_D|}, \\qquad\ng_{mb} = \\frac{g_m \\gamma}{2\\sqrt{2|\\phi_F|+|V_{SB}|}}\n\\]\n\n---\n\n### 2. Two ways to draw/use the model\n\n| Convention | NMOS | PMOS |\n|---|---|---|\n| **A. “Source-referenced” (most common in hand analysis)** | Control voltage: \\(v_{GS}\\) <br> Output: \\(v_{DS}\\) | Control voltage: \\(v_{SG}\\) <br> Output: \\(v_{SD}\\) |\n| **B. “Same-node” (using \\(v_{GS}, v_{DS}\\) for both)** | \\(i_D = g_m v_{GS} + v_{DS}/r_o\\) | \\(i_D = -g_m v_{GS} - v_{DS}/r_o + \\dots\\) <br> (current source points the other way) |\n\n- **Convention A** is what textbooks (Razavi, Sedra, Baker) usually show: draw the **same** small-signal equivalent circuit (gate open, current source \\(g_m v_{ov}\\) in parallel with \\(r_o\\) between drain and source, plus body-effect source), but label the controlling voltage \\(v_{SG}\\) instead of \\(v_{GS}\\).\n- **Convention B** keeps the node names \\(G,S,D\\) fixed. Then you must insert **minus signs** on the current source and on \\(v_{GS}\\) relative to the NMOS case.\n\n---\n\n### 3. Practical takeaway for circuit analysis\n\nIn analog CMOS design you can reuse the NMOS small-signal model for a PMOS **provided you remember**:\n\n1. The controlling voltage is **source-to-gate** (\\(v_{SG}\\) or \\(v_{GS}\\) with a negative sign).\n2. The current source direction is reversed relative to the NMOS case if you keep the same \\(D \\to S\\) orientation.\n3. The body is usually tied to \\(V_{DD}\\) (n-well), so \\(v_{SB}\\) is present only when the source is not at \\(V_{DD}\\).\n\nSo, **yes—the model is identical in structure and parameter values; only the polarity/reference directions change.** If you are sloppy with signs, you will get the wrong gain or wrong DC bias contribution, but the underlying linearized two-port is the same.",
        "format": "markdown",
        "sha256": "89d0d903a96cfe5b0b7b9d462372e3636199b896e200e4bccc1b5360706dcf3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model, with consistent polarity and sign conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 2526,
        "total_tokens": 2561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 2526,
        "total_tokens": 2561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\nThe transistor \\(M_1\\) is an **NMOS** with its gate tied to its drain (the black dot on the left) and its source grounded.  \nThe voltage source \\(V_X\\) is connected between that drain/gate node and ground, so\n\n\\[\nV_{GS}=V_{DS}=V_X .\n\\]\n\nHence \\(M_1\\) is a **diode‑connected MOSFET** – a two‑terminal device whose current is \\(I_X\\).\n\n---\n\n### 1.  Operating regions\n\n| Region | Condition | Behavior |\n|--------|-----------|----------|\n| **Cutoff** | \\(V_X \\le V_{TN}\\) | No channel; \\(I_X\\approx 0\\) |\n| **Saturation** | \\(V_X > V_{TN}\\) | Since \\(V_{DS}=V_{GS}\\), the transistor is always in saturation |\n\n(Here \\(V_{TN}>0\\) is the threshold voltage and the body is tied to the source, so there is no body effect.)\n\n---\n\n### 2.  \\(I\\!-\\!V\\) equation\n\nIn saturation:\n\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\bigl(V_{GS}-V_{TN}\\bigr)^2\n\\]\n\nWith \\(V_{GS}=V_X\\) and \\(I_X=I_D\\):\n\n\\[\n\\boxed{%\nI_X(V_X)=\n\\begin{cases}\n0, & V_X\\le V_{TN}\\\\[4pt]\nK\\bigl(V_X-V_{TN}\\bigr)^2, & V_X>V_{TN}\n\\end{cases}}\n\\]\n\nwhere \\(K=\\frac{1}{2}\\mu_n C_{ox}(W/L)\\).\n\n---\n\n### 3.  Sketch of \\(I_X\\) vs. \\(V_X\\)\n\n- **Horizontal axis:** \\(V_X\\)  \n- **Vertical axis:** \\(I_X\\)\n\nThe curve is flat (zero) up to the “knee” at \\(V_X=V_{TN}\\).  \nAbove \\(V_{TN}\\) it rises as a **parabola** opening upward.\n\n```\nI_X\n |\n |           *\n |         *\n |       *\n |     *\n |   *\n | *\n |_________________ V_X\n      V_TN\n```\n\n**Key features to draw:**\n1. \\(I_X=0\\) for \\(0\\le V_X \\le V_{TN}\\) (and essentially zero for \\(V_X<0\\), ignoring the substrate diode).\n2. At \\(V_X=V_{TN}\\) the curve starts with zero slope.\n3. For \\(V_X>V_{TN}\\): quadratic growth \\(I_X\\propto (V_X-V_{TN})^2\\).\n\nSo the characteristic is that of a **square‑law “diode”** with turn‑on voltage \\(V_{TN}\\).",
        "format": "markdown",
        "sha256": "ea9e07eb8a5669e6060d6f9267ba58ff44581b8d8577e4079280b48730b48ae6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives near-zero current below threshold followed by a quadratic rise in saturation; the sketch and negative-voltage caveat are consistent with the golden solution.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 15365,
        "total_tokens": 16693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14729,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 15365,
        "total_tokens": 16693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14729,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\n- Transistor \\(M_1\\) has its **gate tied to its drain** (the left/top node) and its **source grounded**.  \n  Hence it is a **diode‑connected MOSFET**.\n- The voltage source \\(V_X\\) is applied directly across drain–source, so  \n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\n- Gate current is zero (\\(I_G=0\\)), so KCL at the top node gives  \n\n\\[\nI_X + I_D = 0 \\;\\;\\Longrightarrow\\;\\; I_X = -I_D\n\\]\n\nwhere \\(I_D\\) is defined entering the drain (downward).\n\nThe symbol (source arrow downward, gate on the left) is an **n‑channel enhancement MOSFET** with threshold voltage \\(V_{TH}\\;(>0)\\).\n\n---\n\n### Operating regions\n\n| Region | Condition | Behavior |\n|--------|-----------|----------|\n| **Cutoff** | \\(V_X \\le V_{TH}\\) | \\(V_{GS}<V_{TH}\\Rightarrow I_D\\approx 0\\Rightarrow I_X\\approx 0\\) |\n| **Saturation** | \\(V_X > V_{TH}\\) | \\(V_{DS}=V_{GS}\\Rightarrow V_{DS}\\ge V_{GS}-V_{TH}\\) always holds. <br> Square‑law: \\(I_D=\\frac12 k\\bigl(V_X-V_{TH}\\bigr)^2\\bigl(1+\\lambda V_X\\bigr)\\) with \\(k=\\mu_nC_{ox}(W/L)\\). |\n\nSo for \\(V_X>V_{TH}\\):\n\n\\[\n\\boxed{I_X = -\\frac12 k\\bigl(V_X-V_{TH}\\bigr)^2\\bigl(1+\\lambda V_X\\bigr)}\n\\]\n\nIf channel‑length modulation (\\(\\lambda\\)) is ignored, the curve is a pure parabola.\n\nFor \\(V_X<0\\) we have \\(V_{GS}<0\\), so the device is also cut off: \\(I_X\\approx 0\\).\n\n---\n\n### Sketch of \\(I_X\\) vs. \\(V_X\\)\n\nThe reference arrow for \\(I_X\\) points **to the right** (entering the \\(+\\) terminal of \\(V_X\\)).  \nThus the actual current is **negative** in the “on” region (it leaves the source and flows left through the transistor to ground).\n\n```\n      I_X\n       |\n   0   |------------------------> V_X\n       |           |\n       |           |  (cutoff)\n       |           |\n       |           |      .\n       |           |        .\n       |           |          .  parabola\n       |           |            .\n       |           |              .\n       |           |                .\n       |           |                  .\n       |           |                    .\n  -----|-----------|----------------------> V_X\n       0          V_TH\n       |\n       |<-------- downward parabola for V_X > V_TH\n```\n\nMore precisely:\n\n- **Flat line** at \\(I_X=0\\) for all \\(V_X \\le V_{TH}\\).\n- At \\(V_X=V_{TH}\\) the curve “turns on”.\n- For \\(V_X>V_{TH}\\) it falls quadratically (fourth quadrant) as \\(-\\frac12k(V_X-V_{TH})^2\\).\n\nIf you prefer to plot the **magnitude** \\(|I_X|\\) with the usual “current entering the device” convention, it is the familiar square‑law “diode” curve in the first quadrant:\n\n\\[\n|I_X| = \\frac12 k\\bigl(V_X-V_{TH}\\bigr)^2,\\qquad V_X>V_{TH}\n\\]\n\n---\n\n**Key points to label on your sketch**\n\n- Horizontal axis: \\(V_X\\)\n- Vertical axis: \\(I_X\\)\n- “Knee” at \\((V_{TH},0)\\)\n- Parabolic rise (downward for the shown reference direction) for \\(V_X>V_{TH}\\)\n- \\(I_X\\approx 0\\) everywhere else.",
        "format": "markdown",
        "sha256": "9f741f03e5e6788b957b2b11dfeb9589114dcba3121ae6328967b9de70df8887"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the diode-connected NMOS and its cutoff-to-square-law behavior, but assigns I_X the opposite sign and sketches a downward curve rather than the golden solution’s quadratic rise. The magnitude is right, but the signed I-V sketch is materially wrong.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 9824,
        "total_tokens": 11152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 9824,
        "total_tokens": 11152,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit analysis**\n\nThe transistor \\(M_1\\) has its gate tied to its drain (the black dot), so it is **diode‑connected**.  \nIts source is grounded, hence\n\n\\[\nV_{GS}=V_{DS}=V\n\\]\n\nwhere \\(V\\) is the voltage at the drain/gate node.\n\nThe right‑hand branch contains a diode (cathode on the left, anode on the right) in series with the voltage source \\(V_X\\) (positive on top, negative ground).  \nWhen this branch conducts, KVL gives\n\n\\[\nV = V_X - V_D\n\\]\n\nwith \\(V_D\\approx 0.6\\!-\\!0.7\\;\\text{V}\\) (the diode forward drop).  \nThus the effective gate‑source voltage of \\(M_1\\) is\n\n\\[\nV_{GS}=V_X-V_D .\n\\]\n\nBy KCL the loop current that comes up through \\(V_X\\), left through the diode, and then down through \\(M_1\\) is exactly \\(I_X\\); therefore\n\n\\[\nI_X = I_D .\n\\]\n\n---\n\n**Transistor equation**\n\nAssume \\(M_1\\) is an n‑channel MOSFET with threshold \\(V_{THN}\\) and parameter \\(K=\\tfrac12\\mu C_{ox}(W/L)\\).\n\nBecause \\(V_{DS}=V_{GS}\\), the device is always in **saturation** when it is on (\\(V_{DS}\\ge V_{GS}-V_{THN}\\) is automatically satisfied).\n\n\\[\nI_D = K\\bigl(V_{GS}-V_{THN}\\bigr)^2\n      = K\\bigl(V_X-V_D-V_{THN}\\bigr)^2 ,\n\\qquad V_{GS}>V_{THN}\n\\]\n\nand \\(I_D\\approx 0\\) otherwise.\n\nHence\n\n\\[\n\\boxed{\nI_X(V_X)=\n\\begin{cases}\n0, & V_X \\le V_{THN}+V_D \\\\[4pt]\nK\\bigl(V_X-V_D-V_{THN}\\bigr)^2, & V_X > V_{THN}+V_D\n\\end{cases}\n}\n\\]\n\nIf the diode is treated as ideal (\\(V_D=0\\)), the turn‑on point is simply \\(V_X=V_{THN}\\).\n\n---\n\n**Sketch of \\(I_X\\) vs. \\(V_X\\)**\n\n- For \\(V_X\\) below the turn‑on voltage \\(V_{X0}=V_{THN}+V_D\\) the transistor is cut off and the diode is not forward‑biased: **\\(I_X\\approx 0\\)**.\n- At \\(V_X=V_{X0}\\) the transistor begins to conduct.\n- For \\(V_X>V_{X0}\\) the current rises **quadratically** (square‑law) with \\(V_X\\).\n\n```\nI_X\n |           *\n |         *\n |       *\n |     *\n |   *\n | *\n |_________________ V_X\n      V_TH+V_D\n```\n\nSo the curve is flat (zero) up to about \\(V_{TH}+V_D\\) (typically \\(\\sim 1.2\\!-\\!1.4\\;\\text{V}\\) for a silicon diode and a standard NMOS), then bends upward as a parabola.",
        "format": "markdown",
        "sha256": "077ed915f4c5747b1b0638750ef59b8e486a37895954b2745a9592601272fb31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the diode-connected NMOS and its square-law saturation behavior, but invents a series diode that is not in the circuit and shifts the turn-on point from VTH to VTH+VD. Thus the main trend is right, but the topology and key threshold are wrong.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 18759,
        "total_tokens": 20087,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 18759,
        "total_tokens": 20087,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit interpretation**\n\n- **M₁** is an n‑channel enhancement MOSFET.  \n  - Source → ground (0 V)  \n  - Gate → driven by the source **Vₓ** ⇒ **V_GS = Vₓ**  \n  - Drain → connected to the ideal 1 V supply ⇒ **V_DS = 1 V** (constant)  \n- **Iₓ** is the conventional drain current entering the drain node.\n\nBecause V_DS is fixed at 1 V, the transistor operates in one of three regions depending on Vₓ (with threshold voltage V_TH):\n\n| Region | Condition on Vₓ | Drain current Iₓ |\n|--------|----------------|-------------------|\n| **Cutoff** | Vₓ < V_TH | Iₓ ≈ 0 |\n| **Saturation** | V_TH ≤ Vₓ ≤ V_TH + 1 | Iₓ = ½·k·(Vₓ – V_TH)² |\n| **Triode (linear)** | Vₓ > V_TH + 1 | Iₓ = k·[(Vₓ – V_TH) – ½] |\n\nwhere k = μₙCₒₓ(W/L).\n\nThe boundary between saturation and triode occurs when  \nV_DS = V_GS – V_TH ⇒ 1 = Vₓ – V_TH ⇒ **Vₓ = V_TH + 1 V**.\n\nAt that point  \nIₓ(sat) = Iₓ(tri) = ½·k.\n\n---\n\n### Sketch of Iₓ versus Vₓ\n\n```\nIₓ\n|\n|               /  (triode: straight line, slope k)\n|             /\n|           /\n|         /  ← transition at Vₓ = V_TH + 1\n|       /\n|     /  (saturation: parabola Iₓ ∝ (Vₓ-V_TH)²)\n|   /\n|  /\n| /\n|/_________________________ Vₓ\n 0   V_TH          V_TH+1\n```\n\n**Key features of the curve:**\n\n1. **Flat at zero** for all Vₓ ≤ V_TH (cutoff).\n2. **Quadratic rise** for V_TH < Vₓ < V_TH + 1 (saturation).\n3. **Smooth transition** at Vₓ = V_TH + 1 to a **straight line** with constant slope k (triode region).\n4. The curve is continuous and has a continuous derivative (slope = k) at the transition point.\n\nIf you substitute specific values (e.g., V_TH = 1 V and k = 1 mA/V²), the parabola starts at (1 V, 0), reaches (2 V, 0.5 mA), and then continues linearly with slope 1 mA/V. Without given parameters, the shape above is the correct qualitative sketch.",
        "format": "markdown",
        "sha256": "d40e3ce210982cb08b020656b0794f8e1630cb34d899f8a90fd12290be256d48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation rise up to V_TH + 1 V, and roughly linear triode rise beyond it. Its region-boundary current and slope are consistent with the stated 1 V drain supply.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 8132,
        "total_tokens": 9617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 8132,
        "total_tokens": 9617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit analysis**\n\n- The source \\(V_X\\) is connected between gate and ground ⇒  \n  \\[\n  V_{GS}=V_X ,\\qquad V_S=0\n  \\]\n\n- The 1 V battery is connected between the drain node and ground ⇒  \n  \\[\n  V_D = 1\\;\\text{V}\\;\\;\\Rightarrow\\;\\;V_{DS}=V_D-V_S = 1\\;\\text{V}\n  \\]\n\n- The arrow \\(I_X\\) is in the drain wire ⇒ \\(I_X = I_D\\) (drain current entering the transistor).\n\nSo we need the **NMOS** \\(I_D\\)–\\(V_{GS}\\) characteristic at the fixed drain–source voltage \\(V_{DS}=1\\) V.\n\n---\n\n### MOSFET regions (enhancement‑mode n‑channel)\n\nLet the threshold voltage be \\(V_{TH}\\) (typically ≈ 0.5–1 V) and  \n\\(k=\\mu_n C_{ox}(W/L)\\).\n\n| Region | Condition on \\(V_X\\) | Drain current \\(I_X=I_D\\) |\n|--------|----------------------|--------------------------|\n| **Cutoff** | \\(V_X \\le V_{TH}\\) | \\(I_X \\approx 0\\) |\n| **Saturation** | \\(V_{TH}<V_X\\le V_{TH}+1\\) | \\(I_X=\\frac{k}{2}(V_X-V_{TH})^2\\) |\n| **Triode (linear)** | \\(V_X > V_{TH}+1\\) | \\(I_X=k\\Big[(V_X-V_{TH})-\\frac12\\Big]\\) |\n\nThe boundary between saturation and triode occurs when  \n\\(V_{GS}-V_{TH}=V_{DS}\\) ⇒ \\(V_X = V_{TH}+1\\).\n\nAt that point the current is continuous:\n\\[\nI_X(V_{TH}+1)=\\frac{k}{2}.\n\\]\n\n---\n\n### Sketch of \\(I_X\\) vs. \\(V_X\\)\n\n```\nI_X\n |\n |                /  triode (linear, slope k)\n |               /\n |              /\n |             /  saturation (parabolic)\n |            /\n |           /\n |          /\n |         /\n |        /\n |_______/________________ V_X\n      V_TH   V_TH+1\n```\n\n**Key features of the curve:**\n\n1. **Flat at zero** for \\(V_X \\le V_{TH}\\) (transistor is off).\n2. **Parabolic rise** for \\(V_{TH}<V_X<V_{TH}+1\\) (saturation region, \\(V_{DS}>V_{ov}\\)).\n3. **Straight line** with slope \\(k\\) for \\(V_X>V_{TH}+1\\) (triode region, \\(V_{DS}<V_{ov}\\)).\n4. The curve is continuous at \\(V_X=V_{TH}+1\\) with value \\(I_X=k/2\\).\n\nIf channel‑length modulation (\\(\\lambda\\neq0\\)) is included, the saturation branch has a very slight upward tilt instead of being perfectly flat, but the overall shape remains the same.\n\nSo **\\(I_X\\) is zero below threshold, then grows quadratically, and finally increases linearly with \\(V_X\\)**.",
        "format": "markdown",
        "sha256": "f2581610f219705320134f0a4b19bc72e31f37b1bf2f1780e988bf48278cd9cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the zero, quadratic-saturation, and roughly linear-triode regions, with the transition at VTH + 1 V and the correct current expressions. The channel-length-modulation aside is nonessential to the requested sketch.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 11296,
        "total_tokens": 12781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 11296,
        "total_tokens": 12781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10576,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit interpretation**\n\n- **M₁** is an n‑channel MOSFET (source → ground, gate driven by the left source, drain on the right).  \n- **Vₓ** is applied between gate and ground ⇒ **V_GS = Vₓ**.  \n- The **1 V** source is connected directly across drain–source ⇒ **V_DS = 1 V** (fixed).  \n- **Iₓ** is the current supplied by the 1 V source, i.e. the drain current **I_D**.\n\nBecause the gate is oxide‑isolated, no DC current enters the gate; all of Iₓ flows through M₁.\n\n---\n\n### Transistor equations (neglecting λ)\n\n| Region | Condition | I_D = Iₓ |\n|--------|-----------|----------|\n| **Cutoff** | Vₓ < V_TH | 0 |\n| **Saturation** | Vₓ ≥ V_TH and V_DS ≥ V_GS–V_TH  ⇒  Vₓ ≤ V_TH + 1 | (½)k (Vₓ – V_TH)² |\n| **Triode (linear)** | Vₓ > V_TH + 1 | k[(Vₓ – V_TH) – ½] |\n\nwhere  \nk = μₙCₒₓ(W/L) and V_TH is the threshold voltage (≈ 0.5–1 V).\n\nCheck continuity at the boundary Vₓ = V_TH + 1:  \nI_sat = (½)k(1)² = k/2 = I_triode.\n\n---\n\n### Sketch of Iₓ vs. Vₓ\n\n```\nIₓ\n |\n |               /\n |             /\n |           /\n |         /\n |       /\n |     /\n |   /\n | /\n |/____________________ Vₓ\n   V_TH      V_TH+1\n```\n\n- **Flat line at Iₓ = 0** for Vₓ ≤ V_TH (cutoff).  \n- **Parabolic rise** for V_TH < Vₓ < V_TH + 1 (saturation).  \n- At **Vₓ = V_TH + 1** the curve reaches Iₓ = k/2.  \n- For **Vₓ > V_TH + 1** the curve becomes a **straight line** with slope k (triode region), tangent to the parabola at the boundary point.\n\nSo the characteristic is the standard **NMOS transfer curve I_D(V_GS)** evaluated at the fixed drain bias V_DS = 1 V.",
        "format": "markdown",
        "sha256": "b56e1f89c34a8c38bc344f9c8443c5ada86647e1fec849a82554fd8f6704007d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation rise through V_TH + 1 V, and roughly linear triode rise beyond it. The equations and boundary continuity are consistent with the stated fixed V_DS.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 11433,
        "total_tokens": 12918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 11433,
        "total_tokens": 12918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10881,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — but only if **M₁ is a depletion-mode transistor** (depletion MOSFET or JFET).\n\nHere is why:\n\n### What the circuit is\n- **Drain**: top terminal (where \\(I_X\\) enters)\n- **Source**: bottom right → ground\n- **Gate**: bottom left → ground\n\nSo the gate and source are at the same potential:\n\\[\nV_{GS}=0\n\\]\n\nThis makes the device a **two-terminal element** between the top node and ground.\n\n---\n\n### Case 1: Enhancement-mode MOSFET (\\(V_{th}>0\\))\nWith \\(V_{GS}=0 < V_{th}\\), the channel is **not formed**. The transistor is cut off:\n\\[\nI_X \\approx 0\n\\]\nSo it does **not** act as a useful current source; it behaves like an open circuit.\n\n---\n\n### Case 2: Depletion-mode MOSFET or JFET (\\(V_{th}<0\\) or \\(V_P<0\\))\nAt \\(V_{GS}=0\\) a channel **already exists**. If the drain-source voltage is large enough:\n\\[\nV_{DS} \\ge V_{GS}-V_{th} = |V_{th}|\n\\]\nthe transistor operates in the **saturation (active) region**, where the drain current is essentially independent of \\(V_{DS}\\):\n\n- **JFET:** \\(I_X \\approx I_{DSS}\\)\n- **Depletion NMOS:** \\(I_X \\approx \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{th})^2 = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{th}^2 = \\text{constant}\\)\n\nThus \\(I_X\\) stays nearly constant over a wide range of voltage across the device. This is exactly the behavior of a **constant-current sink** (a two-terminal current source/regulator diode).\n\n---\n\n### Conclusion\n**Yes, the device can act as a current source** — specifically a **current sink of value \\(I_{DSS}\\) (or the corresponding saturation current)** — **provided M₁ is a depletion-mode FET and is kept in saturation** (\\(V_{DS}\\) large enough). \n\nIf M₁ is an enhancement device, then \\(I_X\\approx 0\\) and it does not function as a current source. This gate-to-source-shorted configuration is the classic “depletion load” or “current-regulator diode” connection.",
        "format": "markdown",
        "sha256": "de4a37b7df6e2ef649644664863f292c90005452bdaf62cbc16f13d146a68d17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections and concludes the drawn device can act as a current source. As drawn, M₁ is a diode-connected PMOS with low small-signal resistance, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 4299,
        "total_tokens": 5369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 4299,
        "total_tokens": 5369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nWith the connections shown—**gate and source both grounded**—a standard **enhancement-mode** MOSFET is cut off, so it does **not** work as a useful current source. Only if the device is a **depletion-mode** transistor (JFET or depletion MOSFET) can this two‑terminal hookup act as a constant‑current source.\n\n---\n\n### Why? Analyze the bias\n\nFrom the figure:\n\n- **Source** of \\(M_1\\) → ground (\\(V_S = 0\\))\n- **Gate** of \\(M_1\\) → ground (\\(V_G = 0\\))\n- **Drain** → the terminal where \\(I_X\\) is applied (\\(V_D = V_{DS}\\))\n\nSo\n\n\\[\nV_{GS}=V_G-V_S = 0\n\\]\n\n#### 1. Enhancement NMOS (the usual case, \\(V_{th}>0\\))\n\\[\nV_{GS}=0 < V_{th}\\;\\Rightarrow\\;\\text{transistor is in **cutoff**}\n\\]\n\nThere is no channel. The drain current is essentially zero (only leakage or breakdown current). If you force \\(I_X\\) into the drain, \\(V_D\\) simply rises until some other path (e.g., avalanche breakdown) conducts. The current is **not** regulated at a constant value, so it does **not** behave as a current source.\n\n#### 2. Depletion-mode device (\\(V_{th}<0\\) or JFET with \\(I_{DSS}\\))\nHere a channel already exists at \\(V_{GS}=0\\). If the drain voltage is large enough to reach saturation:\n\n\\[\nV_{DS}\\ge V_{GS}-V_{th}=|V_{th}|\n\\]\n\nthen\n\n\\[\nI_D \\approx I_{DSS} = \\tfrac12 k'(W/L)(V_{GS}-V_{th})^2 = \\text{constant}\n\\]\n\nIn that special case the device **does** act as a two‑terminal constant‑current source (a “current‑regulating diode”).\n\n---\n\n### Bottom line\n\n- **Standard enhancement \\(M_1\\):** **No.** \\(V_{GS}=0\\) turns it off; \\(I_D\\approx 0\\).\n- **Depletion-type / JFET:** **Yes**, it delivers \\(I_{DSS}\\) as long as \\(V_{DS}\\) is in the saturation region.\n\nSo, unless \\(M_1\\) is specifically a depletion‑mode transistor, **the circuit shown cannot be used as a current source**.",
        "format": "markdown",
        "sha256": "11f9ef368c8bd365eefe151998fd5cd594b0c29e0005adec332369588bdb46a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M1 as having its source and gate grounded and concludes it is off at VGS=0. In the figure M1 is a diode-connected PMOS with its source at the IX terminal; the key reason it cannot be a current source is its low small-signal impedance, about 1/gm.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 11957,
        "total_tokens": 13027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 11957,
        "total_tokens": 13027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11394,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the symbol, **M₁ is a MOSFET whose gate and source are both tied to ground**, so\n\n\\[\nV_{GS}=0\n\\]\n\nand the only terminal available for the external circuit is the drain (where \\(I_X\\) enters).\n\nWhether it can act as a current source depends on the transistor type:\n\n| Type | Condition for conduction | Behavior with \\(V_{GS}=0\\) |\n|------|--------------------------|----------------------------|\n| **Enhancement-mode** (\\(V_{th}>0\\)) | Need \\(V_{GS}>V_{th}\\) | \\(0<V_{th}\\) ⇒ **cutoff**. The channel never forms, so \\(I_X\\approx 0\\). It does **not** provide a useful constant current. |\n| **Depletion-mode** (\\(V_{th}<0\\)) or JFET | Channel exists at \\(V_{GS}=0\\) | If \\(V_{DS}>|V_{th}|\\), the device is in **saturation** and delivers \\(I_D\\approx I_{DSS}\\), which is nearly independent of \\(V_{DS}\\) (except for channel-length modulation). In that special case it behaves like a **two-terminal constant-current source** (a “current-regulator diode”). |\n\n### Conclusion\nFor the **standard enhancement NMOS** that is usually implied by the symbol \\(M_1\\):\n\n**No, it cannot act as a current source.** Because \\(V_{GS}=0<V_{th}\\), the transistor is turned off and \\(I_X\\) is essentially zero regardless of the drain voltage.\n\nOnly if \\(M_1\\) is specifically a **depletion-mode device** (with \\(V_{th}<0\\)) will it stay on with \\(V_{GS}=0\\) and, provided \\(V_{DS}\\) is large enough, supply a constant saturation current \\(I_{DSS}\\). Even then it is not an ideal source because of the \\(\\lambda\\) (Early) effect.",
        "format": "markdown",
        "sha256": "6ac9ae0f145d965334e08d017b31449108d3dbf804fed285f3783a9edd0629fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads M₁ as an NMOS with gate and source grounded. The drawn device is a diode-connected PMOS with low small-signal impedance; concluding “no” because an NMOS is off earns 0 under the full-credit rule.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 15571,
        "total_tokens": 16641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 15571,
        "total_tokens": 16641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe transistor $M_1$ is a **PMOS** (enhancement‑mode) device:\n- **Source** $\\rightarrow$ the upper node (between $R_S$ and $M_1$)\n- **Drain** $\\rightarrow$ $V_{\\text{out}}$ (the lower node, between $M_1$ and $R_D$)\n- **Gate** $\\rightarrow$ $V_{\\text{in}}$\n\nThus $R_S$ is in the **source** branch (to $V_{DD}$) and $R_D$ is in the **drain** branch (to ground). The output is taken at the drain.  \nThis is a **common‑source (CS) amplifier with source degeneration** ($R_S$) and load $R_D$.\n\n---\n\n## 1. DC Operating Point\n\nLet $I_D$ be the DC drain current (entering the source, leaving the drain).\n\n$$\n\\begin{aligned}\nV_S &= V_{DD}-I_D R_S \\\\\nV_D &= V_{\\text{out}} = I_D R_D \\\\\nV_{SG} &= V_S-V_{\\text{in}} = V_{DD}-I_D R_S-V_{\\text{in}} \\\\\nV_{SD} &= V_S-V_D = V_{DD}-I_D(R_S+R_D)\n\\end{aligned}\n$$\n\n### Regions of operation\n| Region | Condition |\n|--------|-----------|\n| **Cutoff** | $V_{SG}<|V_{th}| \\;\\Rightarrow\\; V_{\\text{in}} > V_{DD}-I_D R_S-|V_{th}|$ |\n| **Triode** | $V_{SD}<V_{SG}-|V_{th}|$ |\n| **Saturation** | $V_{SD}\\ge V_{SG}-|V_{th}| \\;\\Rightarrow\\; V_{\\text{in}} \\ge I_D R_D-|V_{th}|$ |\n\nIn **saturation** (the usual amplifying region):\n\n$$\nI_D = \\frac{1}{2}k\\bigl(V_{SG}-|V_{th}|\\bigr)^2\\bigl(1+\\lambda V_{SD}\\bigr)\n$$\n\nwith $k=\\frac{1}{2}\\mu_p C_{ox}(W/L)$. Substituting $V_{SG}$ and $V_{SD}$ gives an implicit equation for $I_D$ (and hence $V_{\\text{out}}=I_D R_D$).\n\nIf $\\lambda\\approx 0$:\n\n$$\nI_D = \\frac{1}{2}k\\Bigl(V_{DD}-V_{\\text{in}}-I_D R_S-|V_{th}|\\Bigr)^2\n$$\n\nwhich is a quadratic in $I_D$.\n\n---\n\n## 2. Small‑Signal Analysis\n\nReplace $V_{DD}$ by AC ground. The small‑signal model of $M_1$ contains:\n- Transconductance $g_m = \\dfrac{\\partial I_D}{\\partial V_{SG}}\\Big|_Q \\approx \\dfrac{2I_D}{|V_{SG}-|V_{th}||}$\n- Output resistance $r_o = \\dfrac{1}{\\lambda I_D}$\n- (If the N‑well/body is tied to $V_{DD}$) body‑effect transconductance $g_{mb}=\\chi g_m$ with $\\chi\\approx 0.1\\!-\\!0.3$\n\nDenote AC quantities: $v_{in}, v_s, v_{out}$.\n\n### Voltage Gain $A_v = v_{out}/v_{in}$\n\nApplying KCL at the source and drain nodes yields\n\n$$\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\,\\frac{g_m R_D}{1+(g_m+g_{mb})R_S+\\dfrac{R_S+R_D}{r_o}}}\n$$\n\nIf $r_o\\to\\infty$ and body effect is negligible ($g_{mb}=0$):\n\n$$\n\\boxed{A_v \\approx -\\,\\frac{g_m R_D}{1+g_m R_S}}\n$$\n\nThis is the classic **common‑source gain with source degeneration**.  \nThe minus sign indicates a $180^\\circ$ phase inversion.\n\n### Input Resistance\n\nThe gate is insulated, so\n\n$$\n\\boxed{R_{in} = \\infty}\n$$\n\n### Output Resistance $R_{out}$\n\nSet $v_{in}=0$ and apply a test source at $v_{out}$. The resistance looking into the drain with $R_S$ in the source is $r_o[1+(g_m+g_{mb})R_S]+R_S$. Hence\n\n$$\n\\boxed{R_{out} = R_D \\;\\Big\\|\\; \\Bigl[\\,r_o\\bigl(1+(g_m+g_{mb})R_S\\bigr)+R_S\\Bigr]}\n$$\n\nFor $r_o\\gg R_S$ and $g_m r_o\\gg 1$:\n\n$$\nR_{out}\\approx R_D \\;\\Big\\|\\; \\frac{1}{g_m+g_{mb}}\n$$\n\n---\n\n## 3. Summary of Circuit Behavior\n\n| Parameter | Expression / Value |\n|-----------|-------------------|\n| **Type** | PMOS Common‑Source amplifier |\n| **DC bias** | $V_{\\text{out}}=I_D R_D$, $V_S=V_{DD}-I_D R_S$ |\n| **Voltage gain** | $A_v\\approx -\\dfrac{g_m R_D}{1+g_m R_S}<0$ (magnitude $\\le g_m R_D$) |\n| **Input resistance** | $R_{in}\\to\\infty$ |\n| **Output resistance** | $R_{out}\\approx R_D \\parallel \\dfrac{1}{g_m}$ (low) |\n| **Key feature** | $R_S$ provides **negative feedback** (source degeneration), reducing gain but improving linearity and output resistance stability. |\n\nIf $R_S=0$ (source tied directly to $V_{DD}$), the gain becomes $A_v\\approx -g_m R_D$ and $R_{out}\\approx R_D\\parallel r_o$. The presence of $R_S$ lowers the gain and raises the output resistance seen at the drain by the factor $(1+g_m R_S)$.",
        "format": "markdown",
        "sha256": "34a1a8937f8fc2deef63c913fe083ae7cbb5cd6f8e22af488c8933e22bb9524e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain required by the full-credit rule. The later output-resistance approximation is incorrect, but it is ancillary to the essential answer.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 25871,
        "total_tokens": 27664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 25871,
        "total_tokens": 27664,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24475,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe transistor $M_1$ is an **NMOS** (enhancement-mode) device connected in the **common-drain (source-follower)** configuration:\n\n* **Gate:** $V_{\\mathrm{in}}$\n* **Drain:** connected to $V_{DD}$ through resistor $R_S$\n* **Source:** the output node $V_{\\mathrm{out}}$, which is also connected to ground through $R_D$\n* **Body:** implicitly tied to ground (source for NMOS)\n\nThus $R_S$ is the drain supply resistor and $R_D$ is the source load resistor. The gate current is zero, so $I_G=0$ and $I_D = I_{R_S}=I_{R_D}$.\n\n---\n\n## 1. DC Analysis (Bias Point)\n\nDefine:\n* $V_S = V_{\\mathrm{out}} = I_D R_D$\n* $V_D = V_{DD}-I_D R_S$\n* $V_{GS} = V_{\\mathrm{in}}-V_S = V_{\\mathrm{in}}-I_D R_D$\n* $V_{DS} = V_D-V_S = V_{DD}-I_D(R_S+R_D)$\n\n### Saturation (Active) Region\nIf $V_{DS}\\ge V_{GS}-V_{th}$ (i.e. $V_{\\mathrm{in}}\\le V_D+V_{th}$):\n\n$$I_D = \\frac{1}{2}k_n\\bigl(V_{GS}-V_{th}\\bigr)^2\\bigl(1+\\lambda V_{DS}\\bigr)$$\n\nwhere $k_n=\\mu_n C_{ox}(W/L)$. Ignoring channel-length modulation ($\\lambda=0$):\n\n$$I_D = \\frac{1}{2}k_n\\Bigl[V_{\\mathrm{in}}-I_D R_D-V_{th}\\Bigr]^2$$\n\nThis is a quadratic in $I_D$ (or in $V_{\\mathrm{out}}=I_D R_D$). Solving gives the operating point $(I_D,V_{\\mathrm{out}})$.\n\nThe saturation condition becomes:\n$$\\boxed{V_{\\mathrm{in}} \\le V_{DD}-I_D R_S + V_{th}}$$\n\n### Triode (Linear) Region\nIf $V_{DS}<V_{GS}-V_{th}$:\n\n$$I_D = k_n\\Bigl[(V_{GS}-V_{th})V_{DS}-\\frac{1}{2}V_{DS}^2\\Bigr]$$\n\n### Transfer Characteristic $V_{\\mathrm{out}}(V_{\\mathrm{in}})$\nFrom $V_{\\mathrm{out}}=I_D R_D$ and the saturation equation:\n\n$$\\boxed{V_{\\mathrm{in}} = V_{\\mathrm{out}}+V_{th}+\\sqrt{\\frac{2V_{\\mathrm{out}}}{k_n R_D}}}$$\n\nThis implicit relation describes the DC transfer curve.\n\n---\n\n## 2. Small-Signal AC Analysis\n\nReplace DC supplies by AC ground ($V_{DD}\\to 0$). The small-signal parameters at the Q-point are:\n\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}\\Big|_Q = k_n(V_{GSQ}-V_{th}) = \\sqrt{2k_n I_{DQ}} \\quad (\\lambda=0)$$\n\n$$r_o = \\frac{1}{\\lambda I_{DQ}} \\quad (\\text{or } \\infty \\text{ if } \\lambda=0)$$\n\nThe small-signal equivalent has:\n* $v_{gs}=v_{\\mathrm{in}}-v_{\\mathrm{out}}$\n* Current source $g_m v_{gs}$ from drain to source\n* $r_o$ between drain and source\n* $R_S$ from drain to ground\n* $R_D$ from source to ground\n\n### Voltage Gain $A_v = v_{\\mathrm{out}}/v_{\\mathrm{in}}$\n\nSolving the nodal equations at the source and drain nodes gives the **exact** gain:\n\n$$\\boxed{A_v = \\frac{g_m}{1+g_m R_D + \\dfrac{R_S+R_D}{r_o}}}$$\n\n**Approximations:**\n* If $r_o\\to\\infty$ (neglecting channel-length modulation):\n  $$\\boxed{A_v \\approx \\frac{g_m R_D}{1+g_m R_D} = \\frac{1}{1+\\dfrac{1}{g_m R_D}}}$$\n* If $g_m R_D \\gg 1$:\n  $$\\boxed{A_v \\approx 1}$$\n\nSo the circuit is a **voltage buffer**: gain is positive and always $<1$.\n\n### Input Resistance $R_{\\mathrm{in}}$\n\nThe gate is insulated, so with no explicit gate-bias resistor shown:\n\n$$\\boxed{R_{\\mathrm{in}} \\approx \\infty}$$\n\n### Output Resistance $R_{\\mathrm{out}}$\n\nTurn off $v_{\\mathrm{in}}=0$ and apply a test source $v_x$ at $V_{\\mathrm{out}}$ (with $R_D$ removed). The Thevenin resistance looking into the source node is:\n\n$$\\boxed{R_{\\mathrm{out,amp}} = \\frac{r_o+R_S}{1+g_m r_o}}$$\n\n**Approximation** ($r_o\\to\\infty$ or $g_m r_o\\gg 1$):\n$$\\boxed{R_{\\mathrm{out}} \\approx \\frac{1}{g_m}}$$\n\nWith $R_D$ present in the actual circuit, the total impedance seen at $V_{\\mathrm{out}}$ is:\n$$R_{\\mathrm{out,total}} = R_{\\mathrm{out,amp}} \\parallel R_D \\approx \\frac{1}{g_m}\\parallel R_D$$\n\n---\n\n## 3. Summary of Key Properties\n\n| Parameter | Expression (approx.) | Comment |\n|-----------|----------------------|---------|\n| **Configuration** | Common-drain (source follower) | Output at source |\n| **DC bias** | $V_{\\mathrm{out}}=I_D R_D$ | Solve quadratic for $I_D$ |\n| **Voltage gain** | $A_v \\approx \\dfrac{g_m R_D}{1+g_m R_D}<1$ | Non-inverting, $\\approx 1$ for large $g_m R_D$ |\n| **Input resistance** | $R_{\\mathrm{in}}\\approx\\infty$ | Ideal for voltage sensing |\n| **Output resistance** | $R_{\\mathrm{out}}\\approx 1/g_m$ | Low; good for driving loads |\n| **Effect of $R_S$** | Sets DC bias; modifies AC gain/output resistance only through $r_o$ | For $\\lambda=0$, $R_S$ does not affect $A_v$ or $R_{\\mathrm{out}}$ |\n\n**Conclusion:** The circuit is an **NMOS source-follower (common-drain) amplifier**. It provides **unity voltage gain** (with a small drop $\\approx 1/g_m$), **very high input impedance**, and **low output impedance** $\\approx 1/g_m$, making it an excellent **voltage buffer** between a high-impedance source and a low-impedance load. The resistor $R_S$ primarily determines the DC drain voltage and current, while $R_D$ sets both the DC source bias and the AC load that fixes the gain.",
        "format": "markdown",
        "sha256": "f51e589c224ab0663d590f9b28b88d06957cddf8897e0c0e9a0bac742574d00d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the PMOS common-source stage with source degeneration as an NMOS source follower, so its signal path, gain, and conclusions are fundamentally wrong.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 17767,
        "total_tokens": 19560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 17767,
        "total_tokens": 19560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **PMOS common-source (CS) amplifier with source degeneration**.\n\n- **M₁**: PMOS transistor (source at the top, drain at the bottom, gate driven by $V_{\\mathrm{in}}$)\n- **$R_S$**: Source resistor (between $V_{DD}$ and the source of M₁)\n- **$R_D$**: Drain load resistor (between the drain/$V_{\\mathrm{out}}$ and ground)\n- $V_{DD}$ is AC ground.\n\nBecause there is **no bypass capacitor** across $R_S$, the resistor provides negative feedback for AC signals, reducing the voltage gain but improving linearity and output resistance.\n\n---\n\n## 1. DC Analysis (Bias Point)\n\nDefine the DC gate voltage as $V_{G}=V_{\\mathrm{in}}$ (DC component).  \nLet $I_D>0$ be the current entering the source and leaving the drain.\n\n**Node voltages**\n$$V_S = V_{DD}-I_D R_S$$\n$$V_D = V_{\\mathrm{out}} = I_D R_D$$\n\n**Key voltages**\n$$V_{SG}=V_S-V_G = V_{DD}-I_D R_S-V_{\\mathrm{in}}$$\n$$V_{SD}=V_S-V_D = V_{DD}-I_D(R_S+R_D)$$\n\n**Operating regions**\n\n| Region | Condition (PMOS) |\n|--------|------------------|\n| **Cutoff** | $V_{SG}<|V_{thp}|$ |\n| **Saturation** (active) | $V_{SG}>|V_{thp}|$ **and** $V_{SD}>V_{SG}-|V_{thp}|$ $\\;\\Rightarrow\\; I_D R_D < V_{\\mathrm{in}}+|V_{thp}|$ |\n| **Triode** | $V_{SD}<V_{SG}-|V_{thp}|$ |\n\nIn **saturation** (ignoring channel-length modulation, $\\lambda=0$):\n$$I_D = \\frac{1}{2}k_p\\bigl(V_{SG}-|V_{thp}|\\bigr)^2\n      = \\frac{1}{2}k_p\\Bigl(V_{DD}-V_{\\mathrm{in}}-I_D R_S-|V_{thp}|\\Bigr)^2$$\n\nThis is a quadratic in $I_D$:\n$$K R_S^2 I_D^2 -\\bigl(2K R_S V_{\\mathrm{eff}}+1\\bigr)I_D + K V_{\\mathrm{eff}}^2 =0$$\nwhere $K=\\frac{1}{2}\\mu_p C_{ox}(W/L)=\\frac{1}{2}k_p$ and $V_{\\mathrm{eff}}=V_{DD}-V_{\\mathrm{in}}-|V_{thp}|$.\n\nThe physical root ($R_S\\to 0$ gives $I_D=K V_{\\mathrm{eff}}^2$) is\n$$\\boxed{I_D = \\frac{2K R_S V_{\\mathrm{eff}}+1-\\sqrt{1+4K R_S V_{\\mathrm{eff}}}}{2K R_S^2}}$$\n\nThen\n$$\\boxed{V_{\\mathrm{out}} = I_D R_D}$$\n\nIf $\\lambda\\neq 0$, multiply the saturation current by $(1+\\lambda V_{SD})$.\n\nThe small-signal transconductance at the Q-point is\n$$\\boxed{g_m = \\frac{\\partial I_D}{\\partial V_{SG}}\\Big|_Q = k_p\\bigl(V_{SGQ}-|V_{thp}|\\bigr) = \\sqrt{2k_p I_{DQ}}}$$\nand the transistor output resistance is\n$$\\boxed{r_o = \\frac{1}{\\lambda I_{DQ}}}$$\n\n---\n\n## 2. Small-Signal (AC) Analysis\n\nReplace $V_{DD}$ by AC ground. The small-signal equivalent has:\n- $v_{\\mathrm{in}}$ at the gate\n- Source node $v_s$ connected to ground through $R_S$\n- Drain node $v_{\\mathrm{out}}$ connected to ground through $R_D$\n- Between drain and source: resistor $r_o$ in parallel with a current source $g_m v_{sg}=g_m(v_s-v_{\\mathrm{in}})$\n\nApplying KCL at the source and drain nodes and solving yields:\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}} = -\\frac{g_m R_D}{1+g_m R_S+\\dfrac{R_S+R_D}{r_o}}}$$\n\nIf $r_o \\gg R_S,R_D$ (typical for long-channel devices):\n$$\\boxed{A_v \\approx -\\frac{g_m R_D}{1+g_m R_S} = -\\frac{R_D}{R_S+\\frac{1}{g_m}}}$$\n\nThe negative sign indicates a **180° phase inversion** (common-source behavior). The magnitude is reduced by the factor $(1+g_m R_S)$ due to source degeneration.\n\n### Input Resistance\nThe gate of a MOSFET is insulated:\n$$\\boxed{R_{\\mathrm{in}} = \\infty}$$\n\n### Output Resistance\nSet $v_{\\mathrm{in}}=0$ and apply a test source at $v_{\\mathrm{out}}$:\n$$\\boxed{R_{\\mathrm{out}} = R_D \\;\\Big\\|\\; \\Bigl[r_o\\bigl(1+g_m R_S\\bigr)+R_S\\Bigr]}$$\n\nIf $r_o\\to\\infty$:\n$$R_{\\mathrm{out}} \\approx R_D$$\n\n---\n\n## 3. Summary of Key Results\n\n| Parameter | Expression |\n|-----------|------------|\n| **Type** | PMOS Common-Source with source degeneration |\n| **DC bias** | Solve quadratic for $I_D$; $V_{\\mathrm{out}}=I_D R_D$ |\n| **Saturation condition** | $V_{SG}>|V_{thp}|$ and $I_D R_D < V_{\\mathrm{in}}+|V_{thp}|$ |\n| **Transconductance** | $g_m = k_p(V_{SGQ}-|V_{thp}|)$ |\n| **Voltage gain** | $A_v \\approx -\\dfrac{R_D}{R_S+1/g_m}$ (for $r_o\\to\\infty$) |\n| **Input resistance** | $R_{\\mathrm{in}}=\\infty$ |\n| **Output resistance** | $R_{\\mathrm{out}} = R_D \\parallel [r_o(1+g_m R_S)+R_S]$ |\n\n**Physical interpretation:**  \n$R_S$ provides local negative feedback—when $v_{\\mathrm{in}}$ goes up (making $V_{SG}$ smaller), $I_D$ decreases, lowering the drop across $R_S$ and partially opposing the change. This stabilizes the bias point and makes the gain depend mainly on the resistor ratio $R_D/R_S$ when $g_m R_S \\gg 1$.",
        "format": "markdown",
        "sha256": "e9cb4f6208cd1639f7f1a6cbdaed97ea1e424d626c156d5c4e38477f8d283187"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS) under the stated approximation, satisfying the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 14683,
        "total_tokens": 16476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13110,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 14683,
        "total_tokens": 16476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13110,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **common-drain (source-follower) stage** using an **n-channel enhancement MOSFET** \\(M_1\\):\n\n* **Drain** → \\(V_{DD}\\) (AC ground)\n* **Source** → \\(V_{out}\\) → resistor \\(R_S\\) → Ground\n* **Gate** → input \\(V_{in}\\)\n* **Body** → Ground (substrate), so the **body effect** (\\(g_{mb}\\)) is present.\n\nThe current through \\(R_S\\) is \\(I_D = V_{out}/R_S\\).\n\n---\n\n## 1. DC Analysis (Transfer Characteristic \\(V_{out}\\) vs. \\(V_{in}\\))\n\nDefine:\n* \\(V_{GS}=V_{in}-V_{out}\\)\n* \\(V_{DS}=V_{DD}-V_{out}\\)\n* \\(V_{ov}=V_{GS}-V_{th}=V_{in}-V_{out}-V_{th}\\)\n* \\(k=\\frac{1}{2}\\mu_n C_{ox}(W/L)\\)\n\n### Region I – Cutoff\nIf \\(V_{GS}<V_{th}\\) with \\(V_{out}\\approx 0\\):\n\\[\n\\boxed{V_{in}<V_{th}\\;\\Rightarrow\\;I_D=0,\\;V_{out}=0}\n\\]\n\n### Region II – Saturation (normal active region)\nConditions:\n\\[\nV_{GS}>V_{th}\\;\\Rightarrow\\;V_{out}<V_{in}-V_{th}\n\\]\n\\[\nV_{DS}\\ge V_{GS}-V_{th}\\;\\Rightarrow\\;V_{in}\\le V_{DD}+V_{th}\n\\]\n\nDrain current (ignoring \\(\\lambda\\) first):\n\\[\nI_D = k\\bigl(V_{in}-V_{out}-V_{th}\\bigr)^2\\bigl[1+\\lambda(V_{DD}-V_{out})\\bigr]\n\\]\nSince \\(I_D=V_{out}/R_S\\):\n\\[\n\\boxed{\\frac{V_{out}}{R_S}=k\\bigl(V_{in}-V_{out}-V_{th}\\bigr)^2\\bigl[1+\\lambda(V_{DD}-V_{out})\\bigr]}\n\\]\n\nIf \\(\\lambda\\approx 0\\), solve the quadratic for the overdrive \\(V_{ov}\\):\n\\[\nkR_S V_{ov}^2+V_{ov}-(V_{in}-V_{th})=0\n\\]\n\\[\nV_{ov}=\\frac{-1+\\sqrt{1+4kR_S(V_{in}-V_{th})}}{2kR_S}\n\\]\n\\[\n\\boxed{V_{out}=V_{in}-V_{th}-V_{ov}}\n\\]\n\n### Region III – Triode (Linear)\nOccurs only if \\(V_{in}>V_{DD}+V_{th}\\):\n\\[\nI_D = k\\Bigl[2(V_{GS}-V_{th})V_{DS}-V_{DS}^2\\Bigr]\\bigl[1+\\lambda V_{DS}\\bigr]\n\\]\nwith \\(I_D=V_{out}/R_S\\).\n\n---\n\n## 2. Small-Signal AC Analysis\n\nSmall-signal parameters at the operating point \\((I_D,V_{out})\\):\n\n* Transconductance: \\(\\displaystyle g_m=\\frac{\\partial I_D}{\\partial V_{GS}}=2kV_{ov}(1+\\lambda V_{DS})\\approx \\sqrt{2kI_D}\\)\n* Output resistance: \\(\\displaystyle r_o=\\frac{1}{\\lambda I_D}\\)\n* Body-effect transconductance: \\(\\displaystyle g_{mb}=\\chi g_m,\\quad \\chi=\\frac{\\gamma}{2\\sqrt{2\\phi_F+V_{SB}}}=\\frac{\\gamma}{2\\sqrt{2\\phi_F+V_{out}}}\\)\n\n### Small-Signal Equivalent\n* \\(v_{gs}=v_{in}-v_{out}\\)\n* \\(v_{bs}=0-v_{out}=-v_{out}\\)\n* \\(v_{ds}=-v_{out}\\) (drain is AC ground)\n\nApply KCL at the source node (\\(v_{out}\\)):\n\\[\n\\frac{v_{out}}{R_S}+\\frac{v_{out}}{r_o}-g_m(v_{in}-v_{out})-g_{mb}(-v_{out})=0\n\\]\n\nSolving for \\(v_{out}\\):\n\n### Voltage Gain\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m}{g_m+g_{mb}+\\frac{1}{R_S}+\\frac{1}{r_o}}}\n\\]\n\nIf \\(r_o\\to\\infty\\) and body effect is ignored (\\(g_{mb}=0\\)):\n\\[\n\\boxed{A_v\\approx \\frac{g_m R_S}{1+g_m R_S}<1}\n\\]\n\n### Input Resistance\nThe gate is oxide-isolated:\n\\[\n\\boxed{R_{in}=\\infty}\n\\]\n\n### Output Resistance\nSet \\(v_{in}=0\\) and apply a test source \\(v_x\\) at \\(V_{out}\\). The current drawn is\n\\[\ni_x = v_x\\!\\left(\\frac{1}{R_S}+\\frac{1}{r_o}+g_m+g_{mb}\\right)\n\\]\nHence\n\\[\n\\boxed{R_{out}=\\frac{v_x}{i_x}=\\frac{1}{g_m+g_{mb}+\\frac{1}{R_S}+\\frac{1}{r_o}}=R_S\\;\\|\\;r_o\\;\\|\\;\\frac{1}{g_m+g_{mb}}}\n\\]\n\n---\n\n## 3. Summary of Key Properties\n\n| Parameter | Expression / Value |\n|-----------|-------------------|\n| **Topology** | Common-drain (source follower) |\n| **DC bias** | \\(I_D = V_{out}/R_S\\) with implicit quadratic (sat.) |\n| **Voltage gain** | \\(A_v = \\dfrac{g_m}{g_m+g_{mb}+R_S^{-1}+r_o^{-1}} < 1\\) |\n| **Input resistance** | \\(R_{in}\\approx\\infty\\) |\n| **Output resistance** | \\(R_{out}=R_S\\|r_o\\| (g_m+g_{mb})^{-1}\\) (low) |\n| **Function** | Voltage buffer / level shifter (\\(V_{out}\\approx V_{in}-V_{GS}\\)) |\n\nThe circuit therefore acts as a **unity-gain buffer** (gain close to 1 when \\(g_mR_S\\gg 1\\)) with very high input impedance and low output impedance, suitable for impedance matching.",
        "format": "markdown",
        "sha256": "cbba2dc48dd00bc3fe402bdc361ddf826f1eed71b1272b31f15104923a8806c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain gmRS/(1+gmRS) for the stated simplified case. The body-effect and output-resistance refinements are consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 17349,
        "total_tokens": 19454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15849,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 17349,
        "total_tokens": 19454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15849,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **common-drain (source-follower) amplifier** using a single n-channel enhancement MOSFET \\(M_1\\).\n\n- **Drain** → connected to the supply \\(V_{DD}\\) (AC ground)\n- **Gate** → driven by the input signal \\(V_{in}\\)\n- **Source** → connected to the output node \\(V_{out}\\)\n- **Resistor** \\(R_S\\) → connects the source/output node to ground\n\nBecause the gate is oxide-isolated, the DC input current is zero (\\(R_{in}\\approx\\infty\\)). The transistor provides current gain, and \\(R_S\\) sets the DC bias and acts as the source-degeneration/load resistor.\n\n---\n\n## 1. DC Analysis (Operating Point)\n\nApply KVL/KCL at the source node:\n\\[\nI_D = \\frac{V_{out}}{R_S}, \\qquad V_{GS}=V_{in}-V_{out}, \\qquad V_{DS}=V_{DD}-V_{out}\n\\]\n\nThe transistor operates in one of three regions:\n\n| Region | Condition | Drain Current \\(I_D\\) | Output \\(V_{out}\\) |\n|--------|-----------|----------------------|-------------------|\n| **Cutoff** | \\(V_{GS}\\le V_{th}\\) \\(\\Rightarrow\\) \\(V_{in}\\le V_{th}+V_{out}\\) | \\(I_D\\approx 0\\) | \\(V_{out}\\approx 0\\) (for \\(V_{in}<V_{th}\\)) |\n| **Saturation** | \\(V_{GS}>V_{th}\\) and \\(V_{DS}\\ge V_{GS}-V_{th}\\) \\(\\Rightarrow\\) \\(V_{in}\\le V_{DD}+V_{th}\\) | \\(I_D=\\frac{1}{2}k_n(V_{GS}-V_{th})^2\\bigl[1+\\lambda(V_{DD}-V_{out})\\bigr]\\) | Solve implicitly: \\(\\displaystyle \\frac{V_{out}}{R_S}= \\frac{1}{2}k_n\\bigl(V_{in}-V_{out}-V_{th}\\bigr)^2\\) |\n| **Triode** | \\(V_{DS}<V_{GS}-V_{th}\\) \\(\\Rightarrow\\) \\(V_{in}>V_{DD}+V_{th}\\) | \\(I_D=k_n\\bigl[(V_{GS}-V_{th})V_{DS}-\\frac{1}{2}V_{DS}^2\\bigr]\\) | Usually outside normal input range |\n\nwhere \\(k_n=\\mu_n C_{ox}(W/L)\\).\n\n### Explicit Solution in Saturation (\\(\\lambda\\approx 0\\))\nSet \\(V_{ov}=V_{GS}-V_{th}=V_{in}-V_{out}-V_{th}\\). Then\n\\[\n\\frac{V_{out}}{R_S}=\\frac{1}{2}k_n V_{ov}^2\n\\]\nSolving the quadratic for \\(V_{ov}>0\\):\n\\[\nV_{ov}=\\frac{\\sqrt{1+2k_nR_S(V_{in}-V_{th})}-1}{k_nR_S}\n\\]\nand therefore\n\\[\n\\boxed{V_{out}=V_{in}-V_{th}-\\frac{\\sqrt{1+2k_nR_S(V_{in}-V_{th})}-1}{k_nR_S}}\n\\]\n\nThis is the **DC transfer characteristic** \\(V_{out}(V_{in})\\).\n\n---\n\n## 2. Small-Signal (AC) Analysis\n\nReplace \\(M_1\\) by its small-signal model at the bias point \\((I_D,V_{GS},V_{DS})\\):\n\n- Transconductance: \\(\\displaystyle g_m=\\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_Q = k_n(V_{GS}-V_{th})\\bigl[1+\\lambda V_{DS}\\bigr]\\approx \\frac{2I_D}{V_{ov}}\\)\n- Output resistance: \\(\\displaystyle r_o=\\frac{1}{\\lambda I_D}\\) (if \\(\\lambda\\neq 0\\); otherwise \\(r_o\\to\\infty\\))\n\nThe small-signal equivalent circuit has:\n- \\(v_{gs}=v_{in}-v_{out}\\)\n- A current source \\(g_m v_{gs}\\) from drain (AC ground) to source\n- \\(r_o\\) in parallel with that source\n- Load resistor \\(R_S\\) from source to ground\n\nApply KCL at the source node (\\(v_{out}\\)):\n\\[\ng_m(v_{in}-v_{out}) = \\frac{v_{out}}{R_S}+\\frac{v_{out}}{r_o}\n\\]\n\nSolving for the voltage gain \\(A_v=v_{out}/v_{in}\\):\n\n\\[\n\\boxed{A_v = \\frac{g_m\\,(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)}}\n\\]\n\nIf channel-length modulation is negligible (\\(r_o\\to\\infty\\)):\n\\[\n\\boxed{A_v \\approx \\frac{g_m R_S}{1+g_m R_S}}\n\\]\n\nBecause \\(g_mR_S\\gg 1\\) in typical designs, \\(A_v\\approx 1\\) (the circuit is a **voltage buffer**).\n\n---\n\n## 3. Input and Output Resistances\n\n- **Input resistance** (looking into the gate):\n  \\[\n  \\boxed{R_{in}=\\infty}\n  \\]\n  (No DC or AC gate current flows through the oxide.)\n\n- **Output resistance** (looking into the \\(V_{out}\\) node with \\(v_{in}=0\\)):\n  \\[\n  \\boxed{R_{out}=R_S\\parallel r_o\\parallel \\frac{1}{g_m}\\approx R_S\\parallel\\frac{1}{g_m}}\n  \\]\n  The transistor lowers the output impedance by the factor \\(1/g_m\\).\n\n---\n\n## 4. Summary of Key Properties\n\n| Parameter | Expression / Value |\n|-----------|-------------------|\n| **Type** | Common-drain (source follower) |\n| **DC bias** | \\(I_D=V_{out}/R_S\\), \\(V_{GS}=V_{in}-V_{out}\\) |\n| **Voltage gain** | \\(A_v = \\dfrac{g_m(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)} \\approx \\dfrac{g_mR_S}{1+g_mR_S}<1\\) |\n| **Input resistance** | \\(R_{in}\\approx\\infty\\) |\n| **Output resistance** | \\(R_{out}\\approx R_S\\parallel (1/g_m)\\) |\n| **Phase shift** | \\(0^\\circ\\) (non-inverting) |\n\nThus, the circuit acts as a **high-input-impedance, low-output-impedance voltage buffer** with a gain very close to unity, making it ideal for impedance matching between stages.",
        "format": "markdown",
        "sha256": "9504e2c07e3f06dbd0d84018a1a47f001577dcd371e4475145bfe92f7cf0a15c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required expression and a valid refinement for finite output resistance.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 17283,
        "total_tokens": 19388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 17283,
        "total_tokens": 19388,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **common-drain (source-follower) stage** using an n-channel MOSFET (NMOS) $M_1$:\n- **Drain** $\\rightarrow V_{DD}$ (AC ground)\n- **Gate** $\\rightarrow V_{in}$\n- **Source** $\\rightarrow V_{out}$\n- **Source load** $\\rightarrow R_S$ to ground\n\nThe gate current is zero, so all DC/AC current through $M_1$ flows through $R_S$.\n\n---\n\n## 1. DC Analysis (Transfer Characteristic $V_{out}$ vs. $V_{in}$)\n\nDefine:\n- $V_{GS}=V_{in}-V_{out}$\n- $V_{DS}=V_{DD}-V_{out}$\n- $I_D = \\dfrac{V_{out}}{R_S}$\n\nLet $k=\\mu_n C_{ox}(W/L)$ and $V_{th}>0$.\n\n### Region I – Cutoff ($M_1$ OFF)\nCondition: $V_{GS}<V_{th}\\;\\Rightarrow\\;V_{in}-V_{out}<V_{th}$\n\nSince $I_D=0 \\Rightarrow V_{out}=0$:\n$$\\boxed{V_{in}<V_{th}\\;\\Rightarrow\\;V_{out}=0,\\;I_D=0}$$\n\n### Region II – Saturation\nConditions: $V_{GS}>V_{th}$ and $V_{DS}\\ge V_{GS}-V_{th}$  \n$\\Rightarrow V_{in}\\le V_{DD}+V_{th}$ (usually satisfied for $V_{in}<V_{DD}$).\n\n$$I_D=\\frac{1}{2}k\\bigl(V_{GS}-V_{th}\\bigr)^2\\bigl(1+\\lambda V_{DS}\\bigr)\n      =\\frac{1}{2}k\\bigl(V_{in}-V_{out}-V_{th}\\bigr)^2\\bigl[1+\\lambda(V_{DD}-V_{out})\\bigr]$$\n\nSet $I_D=V_{out}/R_S$:\n$$\\boxed{\\frac{V_{out}}{R_S}=\\frac{1}{2}k\\bigl(V_{in}-V_{out}-V_{th}\\bigr)^2\\bigl[1+\\lambda(V_{DD}-V_{out})\\bigr]}$$\n\nIf $\\lambda\\approx 0$, solving the quadratic gives:\n$$V_{out}=(V_{in}-V_{th})+\\frac{1}{kR_S}\\Bigl[1-\\sqrt{1+2kR_S(V_{in}-V_{th})}\\Bigr]$$\n\nFor large $g_mR_S$ ($kR_S\\gg 1$):\n$$\\boxed{V_{out}\\approx V_{in}-V_{th}}$$\n\n### Region III – Triode (Linear)\nCondition: $V_{GS}>V_{th}$ and $V_{DS}<V_{GS}-V_{th}$  \n$\\Rightarrow V_{in}>V_{DD}+V_{th}$ (rare in normal operation).\n\n$$I_D=k\\Bigl[(V_{GS}-V_{th})V_{DS}-\\frac{1}{2}V_{DS}^2\\Bigr]=\\frac{V_{out}}{R_S}$$\n\n---\n\n## 2. Small-Signal AC Analysis\n\nReplace $V_{DD}\\to$ ground. The small-signal model has:\n- $v_{gs}=v_{in}-v_{out}$\n- Current source $g_m v_{gs}$ (drain $\\to$ source)\n- Output resistance $r_o$ between drain (ground) and source\n- Load $R_S$ from source to ground\n\n### Voltage Gain $A_v = v_{out}/v_{in}$\n\nKCL at the source node:\n$$v_{out}\\Bigl(\\frac{1}{R_S}+\\frac{1}{r_o}\\Bigr)=g_m(v_{in}-v_{out})$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)}}$$\n\nIf $r_o\\to\\infty$ ($\\lambda=0$):\n$$\\boxed{A_v=\\frac{g_m R_S}{1+g_m R_S}<1}$$\n\nThe stage is a **voltage buffer** with gain close to 1 for $g_mR_S\\gg 1$.\n\n### Input Resistance\nThe gate is oxide-isolated:\n$$\\boxed{R_{in}\\approx \\infty}$$\n\n### Output Resistance $R_{out}$ (looking into $V_{out}$ with $v_{in}=0$)\n\nSet $v_{in}=0 \\Rightarrow v_{gs}=-v_{test}$. The impedance seen is $1/g_m$ in parallel with $r_o$, all in parallel with $R_S$:\n\n$$\\boxed{R_{out}=R_S\\parallel r_o\\parallel \\frac{1}{g_m}}$$\n\nIf $r_o\\to\\infty$:\n$$\\boxed{R_{out}\\approx R_S\\parallel \\frac{1}{g_m}}$$\n\n### Transconductance at the Q-point\nIn saturation:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}\\Big|_Q = k(V_{GSQ}-V_{th})\\bigl(1+\\lambda V_{DSQ}\\bigr)\\approx \\frac{2I_{DQ}}{V_{GSQ}-V_{th}}$$\n\n---\n\n## 3. Summary of Behavior\n\n| Region | Condition on $V_{in}$ | $V_{out}$ | Gain/Behavior |\n|--------|----------------------|-----------|---------------|\n| Cutoff | $V_{in}<V_{th}$ | $0$ | No current |\n| Saturation | $V_{th}<V_{in}<V_{DD}+V_{th}$ | $\\approx V_{in}-V_{th}$ | Buffer ($A_v\\approx 1$) |\n| Triode | $V_{in}>V_{DD}+V_{th}$ | Low, nonlinear | Heavy distortion |\n\nThe circuit acts as a **DC level shifter** (down by $\\approx V_{th}$) and an **AC voltage follower** with high input impedance, low output impedance ($\\approx 1/g_m$), and near-unity gain. The source resistor $R_S$ provides negative feedback (source degeneration), improving linearity and stabilizing the bias point.",
        "format": "markdown",
        "sha256": "bfbd0c80cf99a58b3ac821292368bf0708facc061f0a91ea5cfe3c1ee6d5c1cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain expression. The additional output-resistance analysis is also consistent with the stated assumptions.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 12637,
        "total_tokens": 14742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 12637,
        "total_tokens": 14742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11199,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a single-transistor amplifier stage with:\n- Supply voltage $V_{DD}$\n- Load resistor $R_D$ connected between $V_{DD}$ and the output node $V_{out}$\n- Transistor $M_1$ (NMOS, enhancement-mode) with:\n  - **Gate** $\\rightarrow V_{in}$\n  - **Source** $\\rightarrow$ Ground (0 V)\n  - **Drain** $\\rightarrow V_{out}$\n- Output taken at the drain node $V_{out}$\n\nThis is the classic **NMOS common-source amplifier** (or inverter) with a resistive load.\n\n---\n\n## 1. DC Transfer Characteristic $V_{out}(V_{in})$\n\nThe drain current $I_D$ is determined by $V_{GS}=V_{in}$ and $V_{DS}=V_{out}$.\n\n### Region I: Cutoff ($V_{in} < V_{th}$)\nIf $V_{GS} < V_{thn}$, then $I_D \\approx 0$.\n\n$$V_{out} = V_{DD} - I_D R_D = \\boxed{V_{DD}}$$\n\n### Region II: Saturation ($V_{in} > V_{th}$ and $V_{DS} \\ge V_{GS}-V_{th}$)\nHere $V_{out} \\ge V_{in}-V_{th}$ and\n\n$$I_D = \\frac{1}{2}k_n(V_{in}-V_{th})^2\\bigl(1+\\lambda V_{out}\\bigr) \\approx \\frac{1}{2}k_n(V_{in}-V_{th})^2$$\n\nUsing KVL at the drain:\n$$V_{out} = V_{DD} - I_D R_D$$\n\n$$\\boxed{V_{out} \\approx V_{DD} - \\frac{1}{2}k_n R_D (V_{in}-V_{th})^2}$$\n\n### Region III: Triode/Linear ($V_{in} > V_{th}$ and $V_{DS} < V_{GS}-V_{th}$)\nHere $V_{out} < V_{in}-V_{th}$ and\n\n$$I_D = k_n\\left[(V_{in}-V_{th})V_{out} - \\frac{1}{2}V_{out}^2\\right]$$\n\nSubstituting into $V_{out}=V_{DD}-I_D R_D$ gives the implicit relation:\n$$\\boxed{V_{DD}-V_{out} = k_n R_D\\left[(V_{in}-V_{th})V_{out}-\\frac{1}{2}V_{out}^2\\right]}$$\n\nThe boundary between saturation and triode occurs at:\n$$V_{out} = V_{in}-V_{th} \\;\\Rightarrow\\; V_{in} = V_{th} + (V_{DD}-V_{in}) \\dots \\Rightarrow V_{in,sat} \\approx V_{th} + \\sqrt{\\frac{2(V_{DD}-V_{th})}{k_n R_D}}$$\n\n---\n\n## 2. Small-Signal Voltage Gain $A_v = \\frac{dV_{out}}{dV_{in}}$\n\nIn saturation ($\\lambda \\approx 0$):\n- Transconductance: $\\displaystyle g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k_n(V_{GS}-V_{th}) = k_n(V_{in}-V_{th}) = \\sqrt{2k_n I_D}$\n- Transistor output resistance: $r_o = \\frac{1}{\\lambda I_D}$\n\nThe small-signal equivalent has $R_D$ in parallel with $r_o$.\n\n$$A_v = -g_m (R_D \\parallel r_o) \\approx \\boxed{-g_m R_D = -k_n R_D (V_{in}-V_{th})}$$\n\nIf $\\lambda \\neq 0$:\n$$A_v = -g_m(R_D \\parallel r_o) = -\\frac{k_n(V_{in}-V_{th})}{1+\\lambda I_D}R_D \\Big/ \\left(1+\\frac{R_D}{r_o}\\right)$$\n\nIn triode region, $g_m \\approx k_n V_{DS} = k_n(V_{DD}-V_{out})$ and the gain is smaller (approaching 0 as $V_{out}\\to 0$).\n\n---\n\n## 3. Operating Regions Summary\n\n| Condition | Region | $V_{out}$ | Gain |\n|-----------|--------|-----------|------|\n| $V_{in}<V_{th}$ | Cutoff | $V_{DD}$ | 0 |\n| $V_{in}>V_{th}$, $V_{out}>V_{in}-V_{th}$ | Saturation | $V_{DD}-\\frac{1}{2}k_nR_D(V_{in}-V_{th})^2$ | $-g_m R_D$ (large) |\n| $V_{in}>V_{th}$, $V_{out}<V_{in}-V_{th}$ | Triode | Solve implicit equation | Small ($\\to 0$) |\n\n---\n\n## 4. Key Design Insight\n\nThis circuit acts as an **inverting amplifier**:\n- Low $V_{in} \\Rightarrow$ transistor OFF $\\Rightarrow V_{out}\\approx V_{DD}$ (HIGH)\n- High $V_{in} \\Rightarrow$ transistor ON $\\Rightarrow$ large $I_D$ pulls $V_{out}$ LOW\n\nThe voltage swing is from near $V_{DD}$ (cutoff) down to near 0 (deep triode). The maximum small-signal gain occurs in saturation near the transition point ($V_{in}\\approx V_{th}+\\sqrt{2I_D/k_n}$).\n\nIf you need specific numerical values, substitute the given $V_{DD}$, $R_D$, $k_n=\\mu_n C_{ox}(W/L)$, $V_{th}$, and $\\lambda$.",
        "format": "markdown",
        "sha256": "5e66835bf66d8dcead126b4806b92d346c4c6126f03f689d1b9ca46ca7b0866b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the input as applied to the gate and the source as grounded. The actual circuit is common-gate, with the gate AC-grounded and input applied at the source, so the candidate’s topology and gain sign are wrong.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 15783,
        "total_tokens": 17888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 15783,
        "total_tokens": 17888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14465,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a single‑stage **common‑source (CS) amplifier** (also called a resistive‑load NMOS inverter).  \nThe connections are:\n\n* **M₁** – n‑channel enhancement‑mode MOSFET  \n  * Gate → input voltage **V_in**  \n  * Source → ground (implied, bottom rail)  \n  * Drain → output node **V_out**\n* **R_D** – load resistor connected between the supply **V_DD** and the drain (V_out)\n* **V_DD** – DC supply rail\n\nBecause the gate is insulated, the DC input resistance is infinite. The transistor converts the gate‑source voltage **V_GS = V_in** into a drain current **I_D**, which develops a voltage drop across **R_D** and sets **V_out = V_DD – I_D R_D**.\n\n---\n\n## 1. DC Transfer Characteristic  **V_out = f(V_in)**\n\nAssume the transistor is characterized by the threshold voltage **V_TH** (or V_tn), the transconductance parameter **k_n = μ_nC_ox(W/L)**, and (optionally) the channel‑length modulation parameter **λ**.\n\nThe drain‑source voltage is **V_DS = V_out** (since V_S = 0).\n\n| Region | Condition on V_in and V_out | Drain Current I_D | Output Voltage V_out |\n|--------|----------------------------|-------------------|----------------------|\n| **I. Cutoff** | V_in ≤ V_TH  ⇒  V_GS ≤ V_TH | I_D ≈ 0 | **V_out = V_DD** |\n| **II. Saturation** | V_in > V_TH **and** V_DS ≥ V_ov  ⇒  V_out ≥ V_in – V_TH | I_D = ½ k_n (V_in – V_TH)² [1 + λV_out] ≈ ½ k_n (V_in – V_TH)² | **V_out = V_DD – ½ k_n R_D (V_in – V_TH)²** |\n| **III. Triode (Linear)** | V_in > V_TH **and** V_DS < V_ov  ⇒  V_out < V_in – V_TH | I_D = k_n[(V_in–V_TH)V_out – ½V_out²][1+λV_out] ≈ k_n[(V_in–V_TH)V_out – ½V_out²] | Solve KVL + I_D equation:  <br> (k_nR_D/2)V_out² – [1+k_nR_D(V_in–V_TH)]V_out + V_DD = 0 |\n\nwhere **V_ov = V_in – V_TH** is the overdrive voltage.\n\n### Key points of the VTC\n* For **V_in < V_TH**: M₁ is off, no current flows, and **V_out ≈ V_DD** (logic “1”).\n* As **V_in** exceeds **V_TH**, I_D rises quadratically (sat.) and **V_out** falls.\n* When **V_out** drops below **V_in – V_TH**, the transistor enters triode and behaves like a voltage‑controlled resistor.\n* For very large **V_in**, **V_out → 0** (logic “0”).\n\nIf **λ = 0**, the saturation expression is exact; with **λ ≠ 0** there is a slight upward slope in the saturation region.\n\n---\n\n## 2. Small‑Signal (AC) Analysis\n\nChoose a DC operating point **Q = (I_DQ, V_DS,Q)** in the saturation region (the usual amplifying region).\n\n### Small‑signal model parameters\n* Transconductance:  \n  $$g_m = \\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_Q = k_n(V_{GSQ}-V_{TH}) = \\sqrt{2k_n I_{DQ}} \\quad (\\lambda=0)$$\n* Output resistance of M₁:  \n  $$r_o = \\frac{1}{\\lambda I_{DQ}} \\quad (\\text{if } \\lambda \\neq 0; \\; r_o \\to \\infty \\text{ if } \\lambda=0)$$\n\n### Voltage gain\nThe supply **V_DD** is an AC ground. The load seen at the drain is **R_D || r_o**.\n\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_m (R_D \\parallel r_o)$$\n\nIf channel‑length modulation is negligible (**r_o ≫ R_D**):\n\n$$\\boxed{A_v \\approx -g_m R_D}$$\n\nThe negative sign indicates **phase inversion** (common‑source behavior).\n\n### Input and output resistances\n* **R_in = ∞** (gate oxide blocks DC and AC current into the gate).\n* **R_out = R_D \\parallel r_o ≈ R_D** (when r_o is large).\n\n---\n\n## 3. Summary of Circuit Behavior\n\n| Property | Value / Behavior |\n|----------|------------------|\n| **Type** | Common‑source amplifier / NMOS inverter |\n| **DC gain (large signal)** | Nonlinear: quadratic fall in saturation, then linear/triode |\n| **Small‑signal voltage gain** | **A_v ≈ –g_m R_D** (negative, inverting) |\n| **Input resistance** | Infinite (ideal) |\n| **Output resistance** | ≈ R_D |\n| **Output swing** | From near **0** (M₁ fully on) to **V_DD** (M₁ cut off) |\n| **Power consumption** | Static power is drawn only when M₁ is on: P ≈ V_DD²/R_D (in triode) or I_D·V_DS (in saturation) |\n\n---\n\n### Practical Note\nIf this circuit is used as a **digital inverter**, the transition point (where V_in = V_out) occurs in the saturation region and can be found by solving\n\n$$V_{DD} - \\tfrac{1}{2}k_n R_D (V_{in}-V_{TH})^2 = V_{in}$$\n\nThe noise margins (**NM_H**, **NM_L**) are then determined from the points where the slope dV_out/dV_in = –1.\n\nIf specific numerical values for **V_DD, R_D, k_n, W/L, V_TH**, and **λ** are provided, substitute them into the equations above to obtain the exact transfer curve, operating point, and gain.",
        "format": "markdown",
        "sha256": "5642b22d159f011bde920e5e5b6276591b0946cda1ac7efe435c1fdc726ee98f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as common-source with the input at the gate. The figure is common-gate: the input is at M1's source and its gate is AC-grounded, giving approximately 1/gm input resistance and a non-inverting gain. The candidate therefore gets the essential topology, gain sign, and input resistance wrong.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14836,
        "total_tokens": 16941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14836,
        "total_tokens": 16941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a single **NMOS transistor** $M_1$ (enhancement-mode, gate-insulated) with its gate driven by $V_{\\mathrm{in}}$, its source grounded, and its drain connected to the output node $V_{\\mathrm{out}}$. The resistor $R_D$ connects the supply $V_{DD}$ to $V_{\\mathrm{out}}$. This is the classic **common-source (CS) amplifier / resistive-load inverter**.\n\nBelow is the complete DC and small-signal analysis.\n\n---\n\n### 1. DC Transfer Characteristic ($V_{\\mathrm{out}}$ vs. $V_{\\mathrm{in}}$)\n\nApply KVL at the drain node:\n$$V_{DD} = I_D R_D + V_{\\mathrm{out}} \\quad\\Rightarrow\\quad V_{\\mathrm{out}} = V_{DD} - I_D R_D$$\n\nThe transistor operates in three regions depending on $V_{\\mathrm{GS}} = V_{\\mathrm{in}}$ and $V_{\\mathrm{DS}} = V_{\\mathrm{out}}$ (with threshold voltage $V_{\\mathrm{th}} > 0$):\n\n| Region | Condition | Drain Current $I_D$ | Output Voltage |\n|--------|-----------|---------------------|----------------|\n| **Cutoff** | $V_{\\mathrm{in}} < V_{\\mathrm{th}}$ | $I_D = 0$ | $V_{\\mathrm{out}} = V_{DD}$ |\n| **Saturation** | $V_{\\mathrm{in}} > V_{\\mathrm{th}}$ and $V_{\\mathrm{out}} > V_{\\mathrm{in}}-V_{\\mathrm{th}}$ | $I_D = \\frac{1}{2}k_n(V_{\\mathrm{in}}-V_{\\mathrm{th}})^2(1+\\lambda V_{\\mathrm{out}})$ | $V_{\\mathrm{out}} = V_{DD}-\\frac{1}{2}k_n R_D(V_{\\mathrm{in}}-V_{\\mathrm{th}})^2$ |\n| **Triode (Linear)** | $V_{\\mathrm{in}} > V_{\\mathrm{th}}$ and $V_{\\mathrm{out}} < V_{\\mathrm{in}}-V_{\\mathrm{th}}$ | $I_D = k_n\\left[(V_{\\mathrm{in}}-V_{\\mathrm{th}})V_{\\mathrm{out}}-\\frac{1}{2}V_{\\mathrm{out}}^2\\right]$ | Solve quadratic: $V_{\\mathrm{out}} = V_{DD}-I_D R_D$ |\n\n*(If channel-length modulation is ignored, set $\\lambda = 0$.)*\n\nThe boundary between saturation and triode is:\n$$V_{\\mathrm{out}} = V_{\\mathrm{in}} - V_{\\mathrm{th}}$$\n\n---\n\n### 2. Small-Signal AC Analysis\n\nChoose a DC bias point $(V_{\\mathrm{GSQ}}, V_{\\mathrm{DSQ}}) \\Rightarrow I_{DQ}$. Replace $M_1$ by its small-signal model:\n- Transconductance: $\\displaystyle g_m = \\frac{\\partial I_D}{\\partial V_{\\mathrm{GS}}}\\bigg|_Q = k_n(V_{\\mathrm{GSQ}}-V_{\\mathrm{th}}) = \\sqrt{2k_n I_{DQ}}$ (in saturation)\n- Output resistance: $\\displaystyle r_o = \\frac{1}{\\lambda I_{DQ}}$ (if $\\lambda \\neq 0$; otherwise $r_o \\to \\infty$)\n\nThe small-signal equivalent circuit has:\n- Input: $v_{\\mathrm{in}} = v_{gs}$\n- Output node loaded by $R_D$ in parallel with $r_o$\n\n**Voltage Gain:**\n$$A_v = \\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}} = -g_m (R_D \\parallel r_o) \\approx -g_m R_D \\quad (\\text{if } r_o \\gg R_D)$$\n\nThe negative sign indicates a **180° phase inversion** (characteristic of common-source).\n\n**Input Impedance:**\nThe gate oxide is insulating, so\n$$R_{\\mathrm{in}} = \\infty \\quad (\\text{ideal; in practice } \\sim 10^{12}\\,\\Omega)$$\n\n**Output Impedance:**\nLooking into the output node (with $v_{\\mathrm{in}}=0$):\n$$R_{\\mathrm{out}} = R_D \\parallel r_o \\approx R_D$$\n\n---\n\n### 3. Summary of Key Properties\n\n| Parameter | Expression |\n|-----------|------------|\n| Configuration | Common-source (CS) |\n| DC bias | Set by $V_{\\mathrm{in}}$ via $I_D(V_{\\mathrm{GS}})$ |\n| Voltage gain $A_v$ | $-g_m(R_D \\parallel r_o)$ |\n| Input resistance $R_{\\mathrm{in}}$ | $\\infty$ |\n| Output resistance $R_{\\mathrm{out}}$ | $R_D \\parallel r_o$ |\n| Phase shift | $180^\\circ$ |\n\nThus, the circuit acts as an **inverting voltage amplifier** (or digital inverter if driven rail-to-rail). The resistor $R_D$ serves as the drain load, converting the transistor’s current modulation into a voltage swing at $V_{\\mathrm{out}}$.",
        "format": "markdown",
        "sha256": "36d62cd0e4c5ffa197d09a6bb2a26a9455a34e8e8de10fc075ab6b189f82adc2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the circuit connections: Vin is applied to the source and the gate is AC-grounded, making this a common-gate stage. Its common-source conclusion therefore gives the wrong input resistance and gain sign.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19364,
        "total_tokens": 21469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18205,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19364,
        "total_tokens": 21469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18205,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have an **AC-coupled common-source amplifier** using a single MOSFET ($M_1$). Here is the step-by-step analysis.\n\n### 1. Circuit Identification\n- **$V_{DD}$** and **$R_D$** form the drain load.\n- **$M_1$** is an n-channel enhancement MOSFET (source grounded, drain at $V_{out}$).\n- **$V_b$** provides the DC gate bias.\n- **$C_1$** is the input coupling capacitor (blocks DC, passes AC).\n- **$V_{in}$** is the AC input signal; **$V_{out}$** is taken at the drain.\n\nThe transistor operates in the **saturation region** (active region for amplification).\n\n---\n\n### 2. DC Analysis (Operating Point)\n\nThe gate is held at DC potential $V_G = V_b$. The source is grounded ($V_S = 0$), so:\n$$V_{GS} = V_b - 0 = V_b$$\n\nAssume $V_b > V_{th}$ (threshold voltage). The drain current is:\n$$I_D = \\frac{1}{2}k_n\\left(\\frac{W}{L}\\right)(V_{GS}-V_{th})^2\\bigl[1+\\lambda V_{DS}\\bigr]$$\nwhere $k_n = \\mu_n C_{ox}$ and $\\lambda$ is the channel-length modulation parameter.\n\nThe drain-source voltage is:\n$$V_{DS} = V_{out} = V_{DD} - I_D R_D$$\n\nSubstitute $V_{DS}$ into the $I_D$ equation and solve for $I_D$ and $V_{out}=V_{DS}$.\n\n**If $\\lambda \\approx 0$ (ideal long-channel):**\n$$I_D \\approx \\frac{1}{2}k_n\\left(\\frac{W}{L}\\right)(V_b - V_{th})^2$$\n$$V_{out} = V_{DD} - I_D R_D$$\n\nThe transistor is in saturation if $V_{DS} \\ge V_{GS}-V_{th}$, i.e., $V_{out} \\ge V_b - V_{th}$.\n\n---\n\n### 3. Small-Signal AC Analysis\n\nFor AC signals, replace $M_1$ with its small-signal model:\n- Transconductance: $\\displaystyle g_m = \\frac{\\partial I_D}{\\partial V_{GS}}\\Big|_Q = k_n\\left(\\frac{W}{L}\\right)(V_{GS}-V_{th}) = \\frac{2I_D}{V_{GS}-V_{th}} = \\sqrt{2k_n(W/L)I_D}$\n- Output resistance: $\\displaystyle r_o = \\frac{1}{\\lambda I_D}$ (if $\\lambda \\neq 0$; otherwise $r_o \\to \\infty$)\n\nThe AC equivalent circuit has:\n- $V_{DD} \\to$ AC ground\n- $V_b \\to$ AC ground\n- $C_1 \\to$ short circuit (for frequencies of interest)\n\nThe small-signal gate-source voltage is $v_{gs} = v_{in}$ (since $v_s = 0$).\n\nThe drain current is:\n$$i_d = g_m v_{gs} = g_m v_{in}$$\n\nThe output voltage is:\n$$v_{out} = -i_d (R_D \\parallel r_o) = -g_m v_{in}(R_D \\parallel r_o)$$\n\n#### Voltage Gain\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_m (R_D \\parallel r_o)$$\n\nIf $\\lambda \\approx 0$ ($r_o \\to \\infty$):\n$$\\boxed{A_v \\approx -g_m R_D}$$\n\nThe negative sign indicates a **180° phase inversion** (characteristic of common-source).\n\n#### Input Impedance\nThe gate of a MOSFET draws essentially zero DC and AC current:\n$$\\boxed{R_{in} \\approx \\infty}$$\n(In practice, limited by the bias network resistance, which is not shown; if $V_b$ is an ideal source, $R_{in}$ is determined solely by the source impedance of $V_{in}$ in series with $C_1$.)\n\n#### Output Impedance\nLooking into the output node (with $v_{in}=0$):\n$$\\boxed{R_{out} = R_D \\parallel r_o \\approx R_D \\quad (\\text{if } r_o \\gg R_D)}$$\n\n---\n\n### 4. Role of $C_1$\n\n$C_1$ is the **AC coupling (blocking) capacitor**. It:\n- Blocks the DC bias of $V_{in}$ from reaching the gate.\n- Allows the AC signal $v_{in}$ to reach the gate.\n- Together with $R_{in}$, it sets the **lower cutoff frequency**:\n$$f_L \\approx \\frac{1}{2\\pi R_{in,eq} C_1}$$\nwhere $R_{in,eq}$ is the equivalent resistance seen by $C_1$ (approximately the source resistance of $V_{in}$ in parallel with any gate bias resistance).\n\n---\n\n### 5. Summary of Key Results\n\n| Parameter | Expression |\n|-----------|------------|\n| DC Drain Current | $I_D \\approx \\frac{1}{2}k(W/L)(V_b-V_{th})^2$ |\n| DC Output Voltage | $V_{out} = V_{DD}-I_D R_D$ |\n| Transconductance | $g_m = 2I_D/(V_b-V_{th})$ |\n| Voltage Gain | $A_v = -g_m(R_D \\parallel r_o)$ |\n| Input Resistance | $R_{in} \\approx \\infty$ |\n| Output Resistance | $R_{out} = R_D \\parallel r_o$ |\n\n**Conclusion:** The circuit is a **voltage amplifier** with high input impedance, moderate-to-high voltage gain (magnitude $\\approx g_m R_D$), and an inverted output. The capacitor $C_1$ ensures that only the AC component of $V_{in}$ is amplified, while $V_b$ sets the quiescent operating point.",
        "format": "markdown",
        "sha256": "0614e95d6268072c39942cac3a6b36d270c354d6a2ef4d3208e9935262f08081"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misses the source-node short that shorts the input to ground and instead misreads the input as applied to the gate, then analyzes a common-source amplifier.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 14406,
        "total_tokens": 16719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 14406,
        "total_tokens": 16719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a single-stage **MOSFET amplifier** with:\n- Supply rail $V_{DD}$\n- Drain load resistor $R_D$\n- Transistor $M_1$ (n-channel enhancement-mode NMOS, source grounded, drain at $V_{out}$)\n- DC gate-bias source $V_b$\n- AC input source $V_{in}$ coupled through capacitor $C_1$ to the gate\n- Output taken at the drain node $V_{out}$\n\nBecause the source is at AC/DC ground and the drain is loaded by $R_D$, this is a **common-source (CS) voltage amplifier**.  \n$C_1$ blocks DC and couples only the AC component of $V_{in}$ to the gate.\n\n---\n\n## 1. DC Analysis (Quiescent Point, $C_1$ open)\n\nWith $C_1$ open, the gate is held at $V_G = V_b$ and the source is grounded ($V_S=0$).\n\n$$V_{GSQ}=V_b-0 = V_b$$\n\nAssume $M_1$ operates in **saturation** ($V_{DS}\\ge V_{GS}-V_{th}$):\n\n$$I_{DQ} = \\frac{1}{2}k_n\\bigl(V_{GSQ}-V_{thn}\\bigr)^2\n      = \\frac{1}{2}k_n\\bigl(V_b-V_{thn}\\bigr)^2$$\n\nwhere $k_n=\\mu_n C_{ox}(W/L)$ and $V_{thn}>0$.\n\nThe DC output (drain) voltage is\n\n$$V_{out,Q}=V_{DQ}=V_{DD}-I_{DQ}R_D\n           = V_{DD}-\\frac{1}{2}k_n\\bigl(V_b-V_{thn}\\bigr)^2 R_D$$\n\n**Saturation condition:**\n\n$$V_{DSQ}=V_{DQ}\\ge V_{GSQ}-V_{thn}\n\\;\\Longrightarrow\\;\nV_{DD}-I_{DQ}R_D \\ge V_b-V_{thn}$$\n\nIf $V_b<V_{thn}$, then $I_D\\approx 0$ and $V_{out,Q}\\approx V_{DD}$ (cutoff).\n\nIf channel-length modulation ($\\lambda\\neq 0$) is included:\n\n$$I_{DQ}=\\frac{1}{2}k_n\\bigl(V_{GSQ}-V_{thn}\\bigr)^2\\bigl(1+\\lambda V_{DSQ}\\bigr)$$\n\n---\n\n## 2. Small-Signal AC Analysis\n\nReplace $C_1$ by a short circuit for AC signals and ground all DC sources ($V_{DD}\\to 0$, $V_b\\to 0$).\n\n### Small-signal parameters at the Q-point\nTransconductance:\n$$g_m = \\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_Q\n      = k_n\\bigl(V_{GSQ}-V_{thn}\\bigr)\n      = \\sqrt{2k_n I_{DQ}}$$\n\nOutput resistance of $M_1$:\n$$r_o = \\frac{1}{\\lambda I_{DQ}} \\quad (\\infty \\text{ if }\\lambda=0)$$\n\n### Voltage Gain\nThe gate sees $v_{in}=v_{gs}$ (source is AC ground, $v_s=0$).  \nThe drain current is $g_m v_{gs}=g_m v_{in}$. This current flows through the parallel combination $R_D\\parallel r_o$.\n\n$$v_{out} = -g_m v_{in}\\,(R_D\\parallel r_o)$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m\\,(R_D\\parallel r_o)}$$\n\nIf $\\lambda\\approx 0$ ($r_o\\to\\infty$):\n$$\\boxed{A_v \\approx -g_m R_D}$$\n\nThe negative sign indicates a **180° phase inversion** between input and output.\n\n### Input Resistance\nThe gate of a MOSFET is insulated, so\n\n$$\\boxed{R_{in} = \\infty}$$\n\n(In practice, limited by the bias network; here $V_b$ is an ideal source, so $R_{in}\\to\\infty$.)\n\n### Output Resistance\nLooking into the drain (with $v_{in}=0$):\n\n$$\\boxed{R_{out} = R_D \\parallel r_o \\;\\approx\\; R_D \\quad (r_o\\gg R_D)}$$\n\n---\n\n## 3. Role of $C_1$ (Frequency Response)\n\n$C_1$ forms a high-pass filter with the resistance seen at the gate node. Since $R_{in}\\approx\\infty$, the lower cutoff is determined mainly by the **source resistance** $R_{sig}$ of $V_{in}$ (if present):\n\n$$f_L \\approx \\frac{1}{2\\pi R_{sig}C_1}$$\n\nIf $V_{in}$ is an ideal voltage source ($R_{sig}=0$), then $f_L\\to 0$ and $C_1$ serves only to block DC.\n\nThere is no other reactive element, so the upper cutoff is set by parasitic capacitances ($C_{gs}, C_{gd}, C_{db}$), which are not shown.\n\n---\n\n## 4. Summary of Key Results\n\n| Quantity | Expression |\n|----------|------------|\n| DC drain current | $I_D \\approx \\frac{1}{2}k_n(V_b-V_{th})^2$ |\n| DC output voltage | $V_{out,Q}=V_{DD}-I_D R_D$ |\n| Transconductance | $g_m = k_n(V_b-V_{th})$ |\n| Voltage gain | $A_v = -g_m(R_D\\parallel r_o)$ |\n| Input resistance | $R_{in}\\approx\\infty$ |\n| Output resistance | $R_{out}\\approx R_D\\parallel r_o$ |\n| Function | Inverting voltage amplifier / AC-coupled CS stage |\n\n**Operating-region check:** For linear amplification, bias $V_b$ so that $V_{GSQ}>V_{th}$ and $V_{DSQ}>V_{GSQ}-V_{th}$. The AC input swing $v_{in}$ must remain small enough ($|v_{in}|\\ll V_{GSQ}-V_{th}$) to avoid cutoff or triode distortion.",
        "format": "markdown",
        "sha256": "144c9ea8962fe532ba409db4f90ab70dd25b138b6d6d2f9fad29b926ed3fc2a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections, placing the input at the gate and treating the circuit as common-source. It misses that the input is applied to the source node, which is directly shorted to ground, so the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 17793,
        "total_tokens": 20106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16375,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 17793,
        "total_tokens": 20106,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16375,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a **single-stage MOSFET amplifier** with the following connections:\n\n- **M₁**: Transistor (NMOS, source grounded, drain at the output node)\n- **R_D**: Drain load resistor connected to supply **V_DD**\n- **V_b**: DC gate-bias voltage\n- **C₁**: AC-coupling capacitor from input **V_in** to the gate\n- **V_out**: Taken at the drain node\n\nThis is the classic **common-source (CS) amplifier** configuration.\n\n---\n\n## 1. DC Analysis (C₁ is open)\n\nThe gate is biased at:\n$$V_G = V_b, \\quad V_S = 0 \\;\\Rightarrow\\; V_{GS} = V_b$$\n\nAssume M₁ operates in **saturation**:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_{GS}-V_{THN})^2\\bigl(1+\\lambda V_{DS}\\bigr)$$\n\nWith $V_{GS}=V_b$:\n$$\\boxed{I_D \\approx \\frac{1}{2}k_n'(V_b-V_{THN})^2\\bigl(1+\\lambda V_{DS}\\bigr)}$$\n\nThe drain-source voltage and output DC level are:\n$$V_{DS} = V_{DD}-I_D R_D$$\n$$\\boxed{V_{out,DC} = V_{DS} = V_{DD}-I_D R_D}$$\n\n**Saturation condition** (must be checked):\n$$V_{DS} \\ge V_{GS}-V_{THN} \\;\\Rightarrow\\; V_{DD}-I_D R_D \\ge V_b-V_{THN}$$\n\n---\n\n## 2. AC Small-Signal Analysis\n\nReplace **V_DD** and **V_b** with AC ground, and **C₁** with a short (for frequencies where $1/\\omega C_1 \\ll R_{in}$).\n\nThe small-signal equivalent has:\n- $v_{gs} = v_{in} - v_s = v_{in}$  (since $v_s=0$)\n- Transconductance: $g_m = \\dfrac{\\partial I_D}{\\partial V_{GS}} = \\sqrt{2k_n'I_D} = \\dfrac{2I_D}{V_{GS}-V_{THN}}$\n- Output resistance of transistor: $r_o = \\dfrac{1}{\\lambda I_D}$\n\nThe output voltage is:\n$$v_{out} = -g_m v_{gs}(R_D \\parallel r_o) = -g_m v_{in}(R_D \\parallel r_o)$$\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m(R_D \\parallel r_o) \\approx -g_m R_D \\quad (\\text{if } r_o \\gg R_D)}$$\n\nThe negative sign indicates a **180° phase inversion**.\n\n### Input Resistance\nThe gate draws no DC/AC current:\n$$\\boxed{R_{in} = \\infty}$$\n\n*(In practice, limited by the bias network resistance $R_B$ if present; with direct $V_b$ connection, $R_{in}$ is essentially infinite.)*\n\n### Output Resistance\nLooking into the drain (with $v_{in}=0$):\n$$\\boxed{R_{out} = R_D \\parallel r_o \\approx R_D}$$\n\n---\n\n## 3. Role of Capacitor C₁\n\nC₁ blocks DC and couples the AC input signal to the gate. Together with the resistance seen at the gate ($R_B \\parallel R_{in}$ or the source resistance $R_S$ of $V_{in}$), it sets the **lower cutoff frequency**:\n$$f_L \\approx \\frac{1}{2\\pi R_{eq}C_1}$$\n\nIf $V_{in}$ is ideal ($R_S\\approx 0$) and $V_b$ is an ideal source, $C_1$ does not limit the bandwidth; otherwise $R_{eq}$ is the Thevenin resistance at the gate node.\n\n---\n\n## 4. Summary Table\n\n| Parameter | Expression |\n|-----------|------------|\n| DC bias current | $I_D = \\frac{1}{2}k_n'(V_b-V_{TH})^2(1+\\lambda V_{DS})$ |\n| DC output | $V_{out}=V_{DD}-I_D R_D$ |\n| Small-signal gain | $A_v = -g_m(R_D\\parallel r_o)$ |\n| Input resistance | $R_{in}\\approx \\infty$ |\n| Output resistance | $R_{out}=R_D\\parallel r_o$ |\n| Phase shift | $180^\\circ$ |\n\n**Key point:** This stage provides **voltage amplification with inversion**. The gain is set primarily by $g_m$ and the load $R_D$. The coupling capacitor $C_1$ ensures the DC bias point ($V_b$) is not disturbed by the input source.",
        "format": "markdown",
        "sha256": "074b3a9da18b18741fa6bb8da2d39834005a0664b903b263d1d9d9e9f79cf292"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the input connection as going to the gate. In the figure, C₁ drives the source node, which is directly shorted to ground, so the input is shorted and the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 17073,
        "total_tokens": 19386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 17073,
        "total_tokens": 19386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit contains **four capacitors**:\n\n- \\(C_{GS}\\) (gate–source)\n- \\(C_{GD}\\) (gate–drain)\n- \\(C_{DB}\\) (drain–bulk/ground)\n- \\(C_{SB}\\) (source–bulk/ground)\n\nTo find the number of poles we determine how many **independent energy-storage states** exist.\n\nThe capacitors connect the nodes G, S, D and ground:\n\\[\nC_{GS}: G\\!-\\!S,\\quad C_{GD}: G\\!-\\!D,\\quad C_{DB}: D\\!-\\!GND,\\quad C_{SB}: S\\!-\\!GND\n\\]\n\nThese four branches form **one closed loop containing only capacitors (and ground)**:\n\\[\nG \\xrightarrow{C_{GS}} S \\xrightarrow{C_{SB}} GND \\xrightarrow{C_{DB}} D \\xrightarrow{C_{GD}} G\n\\]\n\nBecause of this loop, one capacitor voltage is dependent on the other three.  \nWith no inductors present, the number of state variables (and hence the order of the denominator of the transfer function) is\n\n\\[\nN_{\\text{poles}} = N_C - N_{\\text{loops}} = 4 - 1 = 3.\n\\]\n\nIndeed, writing the nodal equations for \\(V_G, V_S, V_D\\) gives a \\(3\\times3\\) system whose determinant is a **cubic polynomial in \\(s\\)** (with nonzero \\(s^3\\) coefficient), confirming three poles. (There are also two zeros, including one at DC, but they do not reduce the pole count.)\n\n\\[\n\\boxed{3}\n\\]",
        "format": "markdown",
        "sha256": "aca2344b86e56ba51469311dbe9ab96d05d8b295cd4b200baf6932a4eeef752f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the source as a dynamic node. Since the source is grounded, CSB is shorted out; the remaining capacitors have only two independent voltages, so the circuit has two poles, not three. The capacitor-loop counting idea is relevant, but it is applied to the wrong topology.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 18122,
        "total_tokens": 20387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 18122,
        "total_tokens": 20387,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit contains four capacitors:\n\n- \\(C_{GS}\\) (gate–source)\n- \\(C_{GD}\\) (gate–drain)\n- \\(C_{DB}\\) (drain–bulk/ground)\n- \\(C_{SB}\\) (source–bulk/ground)\n\nThese four capacitors connect the four nodes (gate, source, drain, ground) in a single closed loop:\n\\[\nG \\xrightarrow{C_{GS}} S \\xrightarrow{C_{SB}} \\text{Gnd} \\xrightarrow{C_{DB}} D \\xrightarrow{C_{GD}} G\n\\]\n\nFor an RC network, the order of the system (the number of poles) is\n\n\\[\nN_{\\text{poles}} = N_C - L\n\\]\n\nwhere \\(N_C\\) is the number of capacitors and \\(L\\) is the number of independent loops formed only by capacitors (and voltage sources).\n\nHere:\n- \\(N_C = 4\\)\n- The capacitor graph has \\(4\\) nodes and \\(4\\) branches, so \\(L = 4 - 4 + 1 = 1\\).\n\nHence\n\n\\[\nN_{\\text{poles}} = 4 - 1 = 3.\n\\]\n\nSo the transfer function \\(V_{out}/V_{in}\\) is **third-order**: it has **three poles** (and two zeros—one at DC and one right-half-plane zero).\n\n**Answer: 3 poles.**",
        "format": "markdown",
        "sha256": "e3f2b46858700ac7c505f13426246664fbb923addf150a1fe9cc0da3a7dd9ab1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly gives three poles because it treats the source as a distinct node. The source is grounded, so CSB is shorted out; the remaining capacitors have only two independent voltages, giving two poles. The capacitor-loop reasoning is relevant but misapplied.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 19846,
        "total_tokens": 22111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 19846,
        "total_tokens": 22111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal equivalent contains four capacitors  \n\n- \\(C_{GS}\\) (gate–source)  \n- \\(C_{GD}\\) (gate–drain)  \n- \\(C_{DB}\\) (drain–bulk/ground)  \n- \\(C_{SB}\\) (source–bulk/ground)  \n\nbut they are connected among only **three independent AC nodes** (gate \\(G\\), drain \\(D\\), source \\(S\\)) besides ground.  \n\nWriting KCL at \\(G,D,S\\) gives a \\(3\\times3\\) system in \\(v_g,v_d,v_s\\) with a capacitance matrix of full rank (determinant \\(\\neq 0\\)). Hence the state-space dimension is 3, and the transfer function \\(V_{out}/V_{in}\\) has a **cubic denominator**.\n\nSo the circuit is **third-order** and possesses:\n\n1. **Input pole** – at the gate node (involving \\(R_S\\), \\(C_{GS}\\), and the Miller-multiplied \\(C_{GD}\\))  \n2. **Output pole** – at the drain node (involving \\(R_D\\), \\(C_{DB}\\), and \\(C_{GD}\\))  \n3. **Source pole** – at the source node (involving \\(C_{SB}\\) and the source impedance \\(1/g_m\\))\n\nThere are also two zeros (one at DC, \\(s=0\\), and one from the source-degeneration network), but they do not reduce the pole count.\n\n\\[\n\\boxed{3}\n\\]",
        "format": "markdown",
        "sha256": "c8f2770b7dc38a21bc617b183461ef290defa319defa7d836b00aa032691fef1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The source is grounded, so it is not an independent AC node and C_SB is shorted out. The answer incorrectly invents a source pole and concludes there are three poles instead of two.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 14089,
        "total_tokens": 16354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 14089,
        "total_tokens": 16354,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **common-source (CS) amplifier with voltage-series (source) negative feedback**.\n\n*   **M₁** – n-channel enhancement MOSFET (gate driven by $V_{\\mathrm{in}}$, drain at $V_{\\mathrm{out}}$, source at $V_F$).\n*   **$R_D$** – drain load / pull-up resistor to $V_{DD}$.\n*   **$R_1$** – feedback resistor connected between drain ($V_{\\mathrm{out}}$) and source ($V_F$).\n*   **$R_2$** – source resistor to ground.\n*   **$V_F$** – the feedback node (source potential).\n\nThe resistive divider $R_1$–$R_2$ samples the output voltage and applies a fraction to the source, so that  \n$V_{GS}=V_{\\mathrm{in}}-V_F$.\n\n---\n\n## 1. DC Operating-Point Analysis\n\nReplace all AC sources by their DC values ($v_{\\mathrm{in}}=V_{\\mathrm{in}}$).  \nWrite KCL at the two unknown nodes $V_{\\mathrm{out}}$ and $V_F$.\n\n**KCL at $V_F$**\n$$I_D + \\frac{V_{\\mathrm{out}}-V_F}{R_1}= \\frac{V_F}{R_2}$$\n\n**KCL at $V_{\\mathrm{out}}$**\n$$\\frac{V_{DD}-V_{\\mathrm{out}}}{R_D}= \\frac{V_{\\mathrm{out}}-V_F}{R_1}+I_D$$\n\nEliminating $I_D$ gives a linear relation between $V_{\\mathrm{out}}$ and $V_F$:\n$$\\boxed{V_{\\mathrm{out}} = V_{DD}-\\frac{R_D}{R_2}\\,V_F}$$\n\nSubstituting back yields the drain-current equation:\n$$\\boxed{I_D = V_F\\!\\left(\\frac{1}{R_1}+\\frac{1}{R_2}+\\frac{R_D}{R_1R_2}\\right)-\\frac{V_{DD}}{R_1}\n      = V_F\\frac{R_1+R_2+R_D}{R_1R_2}-\\frac{V_{DD}}{R_1}}$$\n\nThe transistor characteristic (saturation, ignoring channel-length modulation $\\lambda=0$) is\n$$I_D = \\frac{1}{2}k'\\frac{W}{L}\\bigl(V_{GS}-V_{th}\\bigr)^2\n      = \\frac{1}{2}k'\\frac{W}{L}\\bigl(V_{\\mathrm{in}}-V_F-V_{th}\\bigr)^2$$\n\nTogether with the $I_D$–$V_F$ relation above, these two equations determine the Q-point $(I_D,V_{GS},V_{DS})$.\n\nIf $\\lambda\\neq 0$:\n$$I_D = \\frac{1}{2}k'\\frac{W}{L}\\bigl(V_{GS}-V_{th}\\bigr)^2\\bigl[1+\\lambda(V_{DS})\\bigr],\\qquad V_{DS}=V_{\\mathrm{out}}-V_F$$\n\n---\n\n## 2. Small-Signal Model\n\nTurn off DC supplies ($V_{DD}\\to 0$). The small-signal equivalent contains:\n\n*   $v_{\\mathrm{in}}$ at the gate\n*   $v_{\\mathrm{out}}$ at the drain\n*   $v_f$ at the source node $V_F$\n*   Transconductance $g_m = \\left.\\dfrac{\\partial I_D}{\\partial V_{GS}}\\right|_Q$\n*   Output resistance $r_o = \\dfrac{1}{\\lambda I_D}$ (if $\\lambda\\neq 0$)\n*   Resistors $R_D,R_1,R_2$\n\nThe transistor is modeled as a voltage-controlled current source $g_m v_{gs}=g_m(v_{\\mathrm{in}}-v_f)$ in parallel with $r_o$ between drain and source.\n\n---\n\n## 3. Voltage Gain $A_v = v_{\\mathrm{out}}/v_{\\mathrm{in}}$\n\nWrite KCL at $v_f$ and $v_{\\mathrm{out}}$ (using conductances $G_D=1/R_D$, $G_1=1/R_1$, $G_2=1/R_2$, $g_o=1/r_o$):\n\n$$\\begin{aligned}\nv_f\\bigl(G_2+G_1+g_o+g_m\\bigr)-v_{\\mathrm{out}}(G_1+g_o) &= g_m v_{\\mathrm{in}}\\\\[4pt]\nv_{\\mathrm{out}}\\bigl(G_D+G_1+g_o\\bigr)-v_f\\bigl(G_1+g_o+g_m\\bigr) &= -g_m v_{\\mathrm{in}}\n\\end{aligned}$$\n\nSolving for $v_{\\mathrm{out}}/v_{\\mathrm{in}}$ gives the **exact gain**:\n\n$$\\boxed{A_v = -\\,\\frac{g_m/R_2}{\\bigl(G_D+G_1+g_o\\bigr)\\bigl(G_1+g_o+g_m+G_2\\bigr)+G_2\\bigl(G_D+G_1+g_o\\bigr)}}$$\n\n### Simplified form ($r_o\\to\\infty$, i.e. $g_o=0$)\n\n$$\\boxed{A_v \\approx -\\,\\frac{g_m R_D R_1}{R_D+R_1+R_2\\bigl(1+g_m R_1\\bigr)}}$$\n\n**Important limiting cases**\n\n| Condition | Approximate Gain |\n|-----------|------------------|\n| $g_m R_1 \\gg 1$ and $g_m R_1R_2 \\gg R_D,R_1,R_2$ | $\\displaystyle A_v \\approx -\\frac{R_D}{R_2}$ |\n| $R_1\\to\\infty$ (no feedback resistor) | $\\displaystyle A_v \\approx -\\frac{g_m R_D}{1+g_m R_2}$ (standard source-degenerated CS) |\n| $R_2\\to\\infty$ (source open) | $A_v\\to 0$ (no AC path to ground) |\n\nThus, when the loop gain $g_mR_1$ is large, the closed-loop gain is set almost entirely by the resistive feedback network:\n$$\\boxed{A_v \\approx -\\frac{R_D}{R_2}}$$\n\n---\n\n## 4. Input Resistance $R_{\\mathrm{in}}$\n\nThe gate of a MOSFET draws no DC or AC current. The feedback is applied to the **source**, not to the gate loop. Hence\n\n$$\\boxed{R_{\\mathrm{in}} = \\infty}$$\n\n(The feedback does increase the resistance seen in the source loop, but the gate itself remains open-circuited.)\n\n---\n\n## 5. Output Resistance $R_{\\mathrm{out}}$\n\nSet $v_{\\mathrm{in}}=0$ and apply a test source $v_x$ at $V_{\\mathrm{out}}$. Solving the same KCL system gives the resistance looking into the drain node (including $R_D$ in parallel):\n\nWith $r_o$ present:\n$$\\boxed{R_{\\mathrm{out}} = R_D \\;\\Big\\|\\; \\Bigl[\\,R_2 + (R_1\\parallel r_o)\\bigl(1+g_m R_2\\bigr)\\Bigr]}$$\n\nWith $r_o\\to\\infty$:\n$$\\boxed{R_{\\mathrm{out}} \\approx R_D \\;\\Big\\|\\; \\bigl[R_1+R_2+g_m R_1R_2\\bigr]\n      = R_D \\;\\Big\\|\\; \\Bigl[R_2\\bigl(1+g_m R_1\\bigr)+R_1\\Bigr]}$$\n\nIf the loop gain is large ($g_mR_1R_2 \\gg R_D,R_1,R_2$):\n$$R_{\\mathrm{out}} \\approx R_D \\;\\Big\\|\\; g_m R_1R_2 \\;\\approx\\; R_D$$\n\n---\n\n## 6. Summary of Key Results\n\n| Parameter | Expression (general) | Approx. ($r_o\\to\\infty$, large loop gain) |\n|-----------|----------------------|-------------------------------------------|\n| **DC bias** | Solve $I_D = f(V_{\\mathrm{in}}-V_F-V_{th})$ together with $V_{\\mathrm{out}}=V_{DD}-R_DV_F/R_2$ | — |\n| **Voltage gain** $A_v$ | Exact rational formula in $g_m,R_i,r_o$ | $\\displaystyle -\\frac{R_D}{R_2}$ |\n| **Input resistance** $R_{\\mathrm{in}}$ | $\\infty$ | $\\infty$ |\n| **Output resistance** $R_{\\mathrm{out}}$ | $R_D\\parallel\\bigl[R_2+(R_1\\parallel r_o)(1+g_mR_2)\\bigr]$ | $\\approx R_D$ |\n\n**Physical interpretation:**  \nThe transistor amplifies the error signal $V_{GS}=V_{\\mathrm{in}}-V_F$. The resistive divider $R_1,R_2$ feeds back a fraction $\\beta\\approx R_2/(R_1+R_2)$ of the output to the source. Because the open-loop gain $A_{OL}\\approx g_mR_D$ is multiplied by the feedback factor, the closed-loop gain becomes stable and is determined primarily by the resistor ratio, reducing distortion and sensitivity to transistor parameter variations—classic **voltage-series negative feedback**.",
        "format": "markdown",
        "sha256": "60b1553d6cd556dc961c4377f0371baee0e2982f20801b472e892543c516b2ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the essential connections: the actual circuit applies the input to M1’s source and feeds the output divider to its gate, whereas the candidate puts the input at the gate and feedback at the source. This yields the wrong topology and an inverting gain instead of the correct non-inverting feedback result.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 28905,
        "total_tokens": 31166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 28905,
        "total_tokens": 31166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\nThe circuit contains one NMOS transistor \\(M_1\\) and three resistors \\(R_D,R_1,R_2\\).\n\n* \\(V_{DD}\\) is connected to the output node \\(V_{out}\\) through \\(R_D\\).\n* From \\(V_{out}\\) to ground there is a resistive divider \\(R_1\\!-\\!R_2\\); the intermediate node is \\(V_F\\).\n* \\(M_1\\) is connected **between drain (\\(V_{out}\\)) and source (\\(V_F\\))**.\n* The gate is driven by the input \\(V_{in}\\).\n\nSo the transistor works with **source degeneration** (\\(R_2\\)) and there is also a **drain–source feedback resistor** \\(R_1\\).\n\nBelow is a complete DC and small‑signal analysis.\n\n---\n\n## 1. DC (bias) analysis\n\nDefine\n\n\\[\nV_{GS}=V_{in}-V_F,\\qquad V_{DS}=V_{out}-V_F\n\\]\n\nand let the NMOS have threshold \\(V_{TH}\\) and parameter \\(k=\\mu_nC_{ox}(W/L)\\) (channel‑length modulation \\(\\lambda\\) is ignored unless noted).\n\nThe drain current is\n\n\\[\nI_D=\n\\begin{cases}\n0, & V_{GS}\\le V_{TH}\\\\[4pt]\nk\\Big[(V_{GS}-V_{TH})V_{DS}-\\tfrac12V_{DS}^2\\Big], & V_{GS}>V_{TH},\\;V_{DS}<V_{GS}-V_{TH}\\\\[6pt]\n\\frac{k}{2}(V_{GS}-V_{TH})^2, & V_{GS}>V_{TH},\\;V_{DS}\\ge V_{GS}-V_{TH}\n\\end{cases}\n\\]\n\n### KCL / KVL equations\n\n**At the source node \\(V_F\\):**\n\n\\[\nI_D+\\frac{V_{out}-V_F}{R_1}=\\frac{V_F}{R_2}\n\\;\\;\\Longrightarrow\\;\\;\nV_F=\\bigl(R_1\\|R_2\\bigr)\\Bigl[I_D+\\frac{V_{out}}{R_1}\\Bigr]\n\\tag{1}\n\\]\n\n**At the drain node \\(V_{out}\\):**\n\n\\[\nV_{out}=V_{DD}-R_D\\Bigl[I_D+\\frac{V_{out}-V_F}{R_1}\\Bigr]\n\\tag{2}\n\\]\n\nEquations (1)–(2) together with the \\(I_D\\) expression above determine the operating point \\((V_{out},V_F,I_D)\\) for a given \\(V_{in}\\).  \nBecause \\(V_F\\) depends on both \\(I_D\\) and \\(V_{out}\\), the system is coupled and is usually solved numerically.\n\n---\n\n## 2. Small‑signal AC analysis\n\nReplace \\(V_{DD}\\) by AC ground. The small‑signal equivalent contains:\n\n* \\(v_{in}\\) at the gate,\n* \\(v_f\\) at the source,\n* \\(v_{out}\\) at the drain,\n* resistor \\(R_D\\) from \\(v_{out}\\) to ground,\n* resistors \\(R_1,R_2\\) forming the divider,\n* transistor model: current source \\(g_m v_{gs}=g_m(v_{in}-v_f)\\) and output resistance \\(r_o\\) (both between drain and source).\n\n### Nodal equations\n\nAt \\(v_{out}\\):\n\n\\[\n\\frac{v_{out}}{R_D}+\\frac{v_{out}-v_f}{R_1}+\\frac{v_{out}-v_f}{r_o}+g_m(v_{in}-v_f)=0\n\\tag{3}\n\\]\n\nAt \\(v_f\\):\n\n\\[\n\\frac{v_f}{R_2}=\\frac{v_{out}-v_f}{R_1}+\\frac{v_{out}-v_f}{r_o}+g_m(v_{in}-v_f)\n\\tag{4}\n\\]\n\nSolving (3)–(4) gives the voltage gain \\(A_v=v_{out}/v_{in}\\).\n\n### Voltage gain \\(A_v\\)\n\nWith \\(G_D=1/R_D,\\;G_1=1/R_1,\\;G_2=1/R_2,\\;G_o=1/r_o\\) and \\(G_{12}=G_1+G_o\\):\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}=\n-\\frac{g_m G_2}{G_DG_2+G_DG_{12}+G_Dg_m+G_2G_{12}}\n}\n\\]\n\nIf \\(r_o\\to\\infty\\) (\\(G_o=0\\)) this simplifies to\n\n\\[\n\\boxed{\nA_v=-\\frac{g_m R_D R_1}{R_D+R_1+R_2+g_mR_1R_2}\n}\n\\tag{5}\n\\]\n\n**Limiting cases**\n\n* **Large transconductance** (\\(g_mR_1R_2\\gg R_D+R_1+R_2\\)):\n  \\[\n  A_v\\;\\approx\\;-\\frac{R_D}{R_2}\n  \\]\n  The gain is set only by the resistive divider ratio, exactly as in a source‑degenerated stage.\n\n* **No feedback resistor** (\\(R_1\\to\\infty\\)):\n  \\[\n  A_v=-\\frac{g_mR_D}{1+g_mR_2}\n  \\]\n  which is the classic common‑source amplifier with source resistor \\(R_2\\).\n\n### Input resistance\n\nThe gate of a MOSFET draws no DC or AC current:\n\n\\[\n\\boxed{R_{in}=\\infty}\n\\]\n\n### Output resistance\n\nSet \\(v_{in}=0\\) (so \\(v_{gs}=-v_f\\)) and apply a test source at \\(v_{out}\\). Solving (3)–(4) yields\n\n\\[\n\\boxed{\nR_{out}=\\frac{G_{12}+G_2+g_m}{G_D(G_{12}+G_2+g_m)+G_{12}G_2}\n}\n\\]\n\nWith \\(r_o=\\infty\\):\n\n\\[\n\\boxed{\nR_{out}=\\frac{\\frac1{R_1}+\\frac1{R_2}+g_m}\n{\\frac1{R_D}\\Bigl(\\frac1{R_1}+\\frac1{R_2}+g_m\\Bigr)+\\frac1{R_1R_2}}\n}\n\\]\n\nFor \\(g_mR_1R_2\\gg R_1,R_2,R_D\\):\n\n\\[\n\\boxed{R_{out}\\approx R_D}\n\\]\n\n(i.e. the transistor behaves like an ideal current source and the only load seen is \\(R_D\\)).\n\n---\n\n## 3. Feedback interpretation\n\nWrite the gate–source voltage as\n\n\\[\nV_{GS}=V_{in}-V_F,\\qquad \nV_F\\approx \\frac{R_2}{R_1+R_2}V_{out}+I_D(R_1\\|R_2)\n\\]\n\nThus the output is sampled by the \\(R_1\\!-\\!R_2\\) divider and fed back to the **source**. The loop gain is\n\n\\[\nL \\approx g_m\\frac{R_1R_2}{R_1+R_2+R_D}>0\n\\]\n\nBecause the feedback is subtracted from \\(V_{in}\\) (\\(V_{GS}=V_{in}-V_F\\)), the loop is **negative (stabilizing)**. The closed‑loop gain is reduced by the factor \\((1+L)\\), which is exactly what Eq. (5) shows.\n\n---\n\n## 4. Summary of key results\n\n| Parameter | Expression (with \\(r_o=\\infty\\)) |\n|-----------|-----------------------------------|\n| DC bias | Solve (1)–(2) with the appropriate \\(I_D\\) region |\n| Voltage gain \\(A_v\\) | \\(\\displaystyle -\\frac{g_mR_DR_1}{R_D+R_1+R_2+g_mR_1R_2}\\) |\n| Limiting gain (\\(g_m\\to\\infty\\)) | \\(-R_D/R_2\\) |\n| Input resistance \\(R_{in}\\) | \\(\\infty\\) |\n| Output resistance \\(R_{out}\\) | \\(\\displaystyle \\frac{1/R_1+1/R_2+g_m}{(1/R_D)(1/R_1+1/R_2+g_m)+1/(R_1R_2)}\\;\\approx R_D\\) |\n\nThe circuit is therefore a **negative‑feedback amplifier** (source‑degeneration with an additional drain–source resistor \\(R_1\\)). Its gain is negative, its input impedance is extremely high, and its output impedance is approximately \\(R_D\\).",
        "format": "markdown",
        "sha256": "0bd1b286541f0b0ccb66b9622fa9ccd1445dc34a3b6791289cedc2b45c3064b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the essential connections: the actual input is applied at M1’s source and the output divider feeds its gate. Its source-degeneration topology and negative, inverting gain therefore analyze a different circuit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 30160,
        "total_tokens": 32421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 30160,
        "total_tokens": 32421,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **common-source (CS) amplifier** built with an NMOS transistor \\(M_1\\) and three resistors:\n\n| Component | Connection |\n|-----------|------------|\n| \\(R_D\\) | Drain load: \\(V_{DD}\\) → drain node (\\(V_{out}\\)) |\n| \\(R_1\\) | Feedback / parallel branch: \\(V_{out}\\) → source node (\\(V_F\\)) |\n| \\(R_2\\) | Source degeneration: \\(V_F\\) → ground |\n| \\(M_1\\) | Gate = \\(V_{in}\\), Drain = \\(V_{out}\\), Source = \\(V_F\\) |\n\nThus \\(R_1\\) is in parallel with the transistor (drain-to-source feedback), while \\(R_2\\) provides source degeneration. The output is taken at the drain.\n\n---\n\n## 1. DC Operating Point\n\nDefine:\n- \\(V_{GS}=V_{in}-V_F\\)\n- \\(V_{DS}=V_{out}-V_F\\)\n- \\(I_D = f(V_{GS},V_{DS})\\)\n\nFor saturation (\\(V_{DS}\\ge V_{GS}-V_{th}\\)):\n\\[\nI_D = \\frac{1}{2}k_n(V_{GS}-V_{th})^2\\bigl(1+\\lambda V_{DS}\\bigr)\n\\]\n\n**KCL at \\(V_F\\):**\n\\[\nI_D + \\frac{V_{out}-V_F}{R_1} = \\frac{V_F}{R_2}\n\\quad\\Longrightarrow\\quad\nI_D = V_F\\!\\left(\\frac{1}{R_1}+\\frac{1}{R_2}\\right)-\\frac{V_{out}}{R_1}\n\\]\n\n**KCL at \\(V_{out}\\):**\n\\[\n\\frac{V_{DD}-V_{out}}{R_D}=I_D+\\frac{V_{out}-V_F}{R_1}\n\\]\n\nThese three equations determine \\(I_D\\), \\(V_F\\) and \\(V_{out}\\) for a given DC input \\(V_{IN}\\).\n\n---\n\n## 2. Small-Signal (AC) Analysis\n\nReplace \\(V_{DD}\\) by AC ground. The small-signal model of \\(M_1\\) has:\n- Transconductance \\(g_m = \\dfrac{\\partial I_D}{\\partial V_{GS}}\\)\n- Output resistance \\(r_o = \\dfrac{1}{\\lambda I_D}\\)\n\nLet \\(v_{in}, v_{out}, v_f\\) be the AC components and \\(v_{gs}=v_{in}-v_f\\).\n\n### Nodal Equations\n\n**At \\(v_f\\) (source node):**\n\\[\nv_f\\!\\left(\\frac{1}{R_2}+\\frac{1}{R_1}+\\frac{1}{r_o}+g_m\\right)-v_{out}\\!\\left(\\frac{1}{R_1}+\\frac{1}{r_o}\\right)=g_m v_{in}\n\\tag{1}\n\\]\n\n**At \\(v_{out}\\) (drain node):**\n\\[\nv_{out}\\!\\left(\\frac{1}{R_D}+\\frac{1}{R_1}+\\frac{1}{r_o}\\right)-v_f\\!\\left(\\frac{1}{R_1}+\\frac{1}{r_o}+g_m\\right)=-g_m v_{in}\n\\tag{2}\n\\]\n\nSolving (1)–(2) for \\(v_{out}/v_{in}\\):\n\n### Voltage Gain \\(A_v = v_{out}/v_{in}\\)\n\n**Exact (with \\(r_o\\)):**\n\\[\n\\boxed{\nA_v = -\\,\\frac{g_m R_D R_1 r_o}\n{R_D R_1 + R_D r_o + R_1 r_o + R_2 r_o + R_1 R_2 + g_m R_1 R_2 r_o}\n}\n\\]\n\n**Approximate (\\(r_o\\to\\infty\\), i.e. \\(\\lambda=0\\)):**\n\\[\n\\boxed{\nA_v \\approx -\\,\\frac{g_m R_D}{\\left(1+g_m R_2\\right)+\\dfrac{R_D+R_2}{R_1}}\n= -\\,\\frac{g_m R_D R_1}{R_D+R_1+R_2+g_m R_1 R_2}\n}\n\\]\n\n**Checks:**\n- If \\(R_1\\to\\infty\\) (no feedback): \\(A_v \\to -\\dfrac{g_m R_D}{1+g_m R_2}\\) (standard CS with source degeneration).\n- If \\(R_2=0\\): \\(A_v \\to -g_m(R_D\\|R_1)\\) (common-source with resistive load \\(R_D\\|R_1\\)).\n\n---\n\n### Input Resistance \\(R_{in}\\)\n\nThe gate of a MOSFET draws no DC or AC current:\n\\[\n\\boxed{R_{in} = \\infty}\n\\]\n\n---\n\n### Output Resistance \\(R_{out}\\)\n\nSet \\(v_{in}=0\\) and apply a test source \\(v_x\\) at \\(v_{out}\\). Solving the nodal system gives \\(i_x/v_x\\):\n\n**Exact:**\n\\[\nR_{out}= \\frac{(G_2+G_1+g_o+g_m)}{G_D(G_2+G_1+g_o+g_m)+G_2(G_1+g_o)}\n\\quad\\left(G_i=\\frac{1}{R_i},\\;g_o=\\frac{1}{r_o}\\right)\n\\]\n\n**Approximate (\\(r_o\\to\\infty\\)):**\n\\[\n\\boxed{\nR_{out}\\approx R_D\\;\\Big\\|\\;\\Bigl[R_1+R_2\\bigl(1+g_m R_1\\bigr)\\Bigr]\n= R_D\\;\\Big\\|\\;\\Bigl[R_1+R_2+g_m R_1 R_2\\Bigr]\n}\n\\]\n\nAgain, check limiting cases:\n- \\(R_1\\to\\infty \\Rightarrow R_{out}\\to R_D\\) (source degeneration does not raise \\(R_{out}\\) when \\(r_o=\\infty\\)).\n- \\(R_2=0 \\Rightarrow R_{out}\\to R_D\\|R_1\\).\n\n---\n\n## 3. Summary of Key Results\n\n| Parameter | Expression (approx., \\(r_o=\\infty\\)) |\n|-----------|--------------------------------------|\n| **Voltage gain** | \\(A_v \\approx -\\dfrac{g_m R_D}{(1+g_m R_2)+(R_D+R_2)/R_1}\\) |\n| **Input resistance** | \\(R_{in}=\\infty\\) |\n| **Output resistance** | \\(R_{out}\\approx R_D\\|\\bigl[R_1+R_2(1+g_m R_1)\\bigr]\\) |\n\nThe resistor \\(R_1\\) provides **voltage-series (shunt-derived) feedback**: it samples the output voltage at the drain and returns a proportional voltage to the source node \\(V_F\\), reducing the gain but also lowering distortion and stabilizing the bias point. The resistor \\(R_2\\) sets the source-degeneration level, further linearizing the transfer characteristic and increasing the input linear range at the expense of gain.",
        "format": "markdown",
        "sha256": "c49bf373cba753f5f6722e8a70913dc72ea746cd46c3dbe40b33496a9850ea16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the essential topology: the input is at the source and the R1–R2 divider feeds the output back to the gate, not the gate input with source degeneration. Its inverting gain analysis therefore applies to a different circuit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 19551,
        "total_tokens": 21812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 19551,
        "total_tokens": 21812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have two MOSFETs stacked between the supply $V_{DD}$ and ground, with the intermediate node being $V_{out}$.\n\n### 1. Circuit Identification\n- **$M_1$**: Source $\\to V_{DD}$, Drain $\\to V_{out}$, Gate $\\to V_{in}$. The arrow points into the source $\\Rightarrow$ **PMOS**.\n- **$M_2$**: Source $\\to$ Ground, Drain $\\to V_{out}$, Gate $\\to V_b$. The arrow points away from the source $\\Rightarrow$ **NMOS**.\n- The body of $M_1$ is tied to $V_{DD}$ and that of $M_2$ to ground, so **there is no body effect** ($\\gamma=0$).\n\nThis is a **CMOS common-source amplifier** with an **active load** ($M_2$):\n- $V_{in}$ is the AC signal input.\n- $V_b$ is a DC bias that sets the quiescent current $I_D$.\n- $V_{DD}$ is the supply (AC ground).\n\n---\n\n### 2. DC Operating Point ($Q$-point)\n\nLet $V_{IN}$ and $V_B$ be the DC levels of $v_{in}$ and $v_b$. The drain currents are equal ($I_{D1}=I_{D2}=I_D$).\n\n**PMOS $M_1$** ($V_{SG}=V_{DD}-V_{IN}$, $V_{SD}=V_{DD}-V_{OUT}$):\n- **Cutoff**: $V_{SG}<|V_{thp}| \\;\\Rightarrow\\; V_{IN}>V_{DD}-|V_{thp}|$\n- **Saturation**: $V_{SD}\\ge V_{SG}-|V_{thp}| \\;\\Rightarrow\\; V_{OUT}\\le V_{IN}+|V_{thp}|$\n  $$I_D = \\frac{1}{2}k_p\\bigl(V_{DD}-V_{IN}-|V_{thp}|\\bigr)^2\\bigl(1+\\lambda_p(V_{DD}-V_{OUT})\\bigr)$$\n- **Triode**: $V_{OUT}>V_{IN}+|V_{thp}|$\n\n**NMOS $M_2$** ($V_{GS}=V_B$, $V_{DS}=V_{OUT}$):\n- **Cutoff**: $V_{GS}<V_{thn} \\;\\Rightarrow\\; V_B<V_{thn}$\n- **Saturation**: $V_{DS}\\ge V_{GS}-V_{thn} \\;\\Rightarrow\\; V_{OUT}\\ge V_B-V_{thn}$\n  $$I_D = \\frac{1}{2}k_n\\bigl(V_B-V_{thn}\\bigr)^2\\bigl(1+\\lambda_n V_{OUT}\\bigr)$$\n- **Triode**: $V_{OUT}<V_B-V_{thn}$\n\n**Solving for $V_{OUT,Q}$** (both in saturation, $\\lambda\\neq 0$):\nSet $I_{D1}=I_{D2}$ and solve:\n$$V_{OUT,Q} \\approx \\frac{I_{D0p}(1+\\lambda_p V_{DD})-I_{D0n}}{I_{D0p}\\lambda_p + I_{D0n}\\lambda_n}$$\nwhere $I_{D0p}=\\frac{1}{2}k_p(V_{SG,Q}-|V_{thp}|)^2$ and $I_{D0n}=\\frac{1}{2}k_n(V_{GS,Q}-V_{thn})^2$.\n\nFor amplification, both must be saturated:\n$$\\boxed{V_B-V_{thn} \\le V_{OUT,Q} \\le V_{IN}+|V_{thp}|}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nReplace DC sources by AC ground ($V_{DD}\\to 0$, $V_B\\to 0$).\n\n**Small-signal parameters at $Q$-point:**\n$$g_{m1} = k_p\\bigl(V_{SG,Q}-|V_{thp}|\\bigr) = \\frac{2I_D}{V_{SG,Q}-|V_{thp}|} = \\sqrt{2k_p I_D}$$\n$$g_{m2} = k_n\\bigl(V_{GS,Q}-V_{thn}\\bigr) = \\frac{2I_D}{V_{GS,Q}-V_{thn}} = \\sqrt{2k_n I_D}$$\n$$r_{o1} = \\frac{1}{\\lambda_p I_D}, \\qquad r_{o2} = \\frac{1}{\\lambda_n I_D}$$\n\nBecause $V_b$ is pure DC, $v_{gs2}=0 \\Rightarrow g_{m2}$ does **not** contribute to the gain.\n\n**Equivalent circuit at $V_{out}$:**\n- From $M_1$: current source $-g_{m1}v_{in}$ in parallel with $r_{o1}$\n- From $M_2$: only $r_{o2}$ (since $v_{gs2}=0$)\n\nApplying KCL at $V_{out}$:\n$$-g_{m1}v_{in} - \\frac{v_{out}}{r_{o1}} - \\frac{v_{out}}{r_{o2}} = 0$$\n\n**Voltage Gain:**\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}\\,(r_{o1}\\parallel r_{o2})}$$\n\nIf $\\lambda_p,\\lambda_n \\to 0$ (ideal long-channel), $r_o\\to\\infty$ and $|A_v|\\to\\infty$. With finite $\\lambda$:\n$$|A_v| \\approx \\frac{2}{(V_{SG,Q}-|V_{thp}|)(\\lambda_p+\\lambda_n)}$$\n\n**Input/Output Resistances:**\n- $\\boxed{R_{in} = \\infty}$ (gate oxide isolation)\n- $\\boxed{R_{out} = r_{o1}\\parallel r_{o2} = \\frac{1}{(\\lambda_p+\\lambda_n)I_D}}$\n\n---\n\n### 4. Digital/Logic Behavior (for reference)\n\nIf $V_{in},V_b \\in \\{0,V_{DD}\\}$:\n\n| $V_{in}$ | $V_b$ | $M_1$ | $M_2$ | $V_{out}$ |\n|:---:|:---:|:---:|:---:|:---:|\n| 0 | 0 | ON | OFF | $\\approx V_{DD}$ (High) |\n| 0 | $V_{DD}$ | ON | ON | Intermediate ($\\sim V_{DD}/2$) |\n| $V_{DD}$ | 0 | OFF | OFF | **Floating** (High-Z) |\n| $V_{DD}$ | $V_{DD}$ | OFF | ON | $\\approx 0$ (Low) |\n\nThus, for analog use, $V_b$ is fixed in saturation and $V_{in}$ swings around $V_{IN,Q}$; for digital use, the $(0,0)\\to H$ and $(V_{DD},V_{DD})\\to L$ states are well-defined, but the other two combinations produce either a short-circuit current or a high-impedance state.\n\n---\n\n### Summary\nThe circuit is a **single-stage CMOS common-source amplifier** with PMOS input transistor $M_1$ and NMOS active-load transistor $M_2$. Its key figures of merit are:\n- **Gain:** $A_v = -g_{m1}(r_{o1}\\|r_{o2})$\n- **Input resistance:** Infinite\n- **Output resistance:** $r_{o1}\\|r_{o2}$\n- **Operating condition:** Both transistors in saturation, set by the DC bias $V_B$.",
        "format": "markdown",
        "sha256": "eeca4eb06dcbfb0153c2ed49ee719dc3a547eba67b2362eee06fd44b78f148c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a common-source amplifier with a PMOS input device and gives an inverting gain. The actual circuit is an NMOS source follower with positive gain at or slightly below unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14598,
        "total_tokens": 16703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14598,
        "total_tokens": 16703,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have two MOSFETs with a shared drain node ($V_{out}$):\n\n* **$M_1$**: Source → $V_{DD}$, Gate → $V_{in}$, Drain → $V_{out}$. The arrow points **into** the channel from the top source $\\Rightarrow$ **PMOS** (in an n-well tied to $V_{DD}$).\n* **$M_2$**: Source → GND, Gate → $V_b$, Drain → $V_{out}$. The arrow points **away** from the bottom source $\\Rightarrow$ **NMOS** (in the p-substrate tied to GND).\n\nBecause $M_2$’s gate is held at a DC bias $V_b$ while $M_1$’s gate receives the signal $V_{in}$, this is a **CMOS common-source amplifier with an active current-source load** ($M_2$).\n\n---\n\n## 1. DC Analysis (Transfer Characteristic $V_{out}$ vs. $V_{in}$)\n\nDefine $k'_n=\\mu_n C_{ox}(W/L)_2$ and $k'_p=\\mu_p C_{ox}(W/L)_1$.\n\n### $M_2$ (NMOS load)\n$$V_{GS2}=V_b,\\qquad V_{DS2}=V_{out}$$\n\n| Region | Condition | Current |\n|--------|-----------|---------|\n| Cutoff | $V_b \\le V_{thn}$ | $I_{D2}=0$ |\n| Triode | $V_{out}<V_b-V_{thn}$ | $I_{D2}=k'_n\\Big[(V_b-V_{thn})V_{out}-\\frac{V_{out}^2}{2}\\Big]$ |\n| Saturation | $V_{out}\\ge V_b-V_{thn}$ | $I_{D2}=\\frac{1}{2}k'_n(V_b-V_{thn})^2\\big[1+\\lambda_n V_{out}\\big]$ |\n\n### $M_1$ (PMOS input device)\n$$V_{SG1}=V_{DD}-V_{in},\\qquad V_{SD1}=V_{DD}-V_{out}$$\n\n| Region | Condition | Current $|I_{D1}|$ |\n|--------|-----------|-------------------|\n| Cutoff | $V_{in}\\ge V_{DD}-|V_{thp}|$ | $0$ |\n| Triode | $V_{DD}-V_{out}<V_{SG1}-|V_{thp}|$ | $k'_p\\Big[(V_{SG1}-|V_{thp}|)V_{SD1}-\\frac{V_{SD1}^2}{2}\\Big]$ |\n| Saturation | $V_{SD1}\\ge V_{SG1}-|V_{thp}|$ | $\\frac{1}{2}k'_p(V_{SG1}-|V_{thp}|)^2\\big[1+\\lambda_p V_{SD1}\\big]$ |\n\n### DC Operating Point\nSet $|I_{D1}|=I_{D2}=I_{bias}$.\n\nIf both are in saturation (ignoring $\\lambda$):\n$$\\frac{1}{2}k'_p\\big(V_{DD}-V_{in}-|V_{thp}|\\big)^2 = \\frac{1}{2}k'_n(V_b-V_{thn})^2$$\n\nThis fixes the bias value $V_{in}=V_{BIAS}$. The bias current is set entirely by $V_b$:\n$$I_{bias}\\approx \\frac{1}{2}k'_n(V_b-V_{thn})^2$$\n\nBecause $\\lambda\\neq 0$ in reality, $V_{out}$ is uniquely determined; with $\\lambda=0$ the transition is vertical (infinite small-signal gain at the bias point).\n\n**Key DC behavior:**\n* $V_{in}\\approx V_{DD}$ $\\Rightarrow$ $M_1$ weak/cutoff $\\Rightarrow$ $V_{out}\\approx 0$\n* $V_{in}\\approx 0$ $\\Rightarrow$ $M_1$ strong $\\Rightarrow$ $V_{out}\\approx V_{DD}$\n\n---\n\n## 2. Small-Signal Analysis\n\nBoth sources are at AC ground ($V_{DD}$ and GND are AC shorts).\n\n* **Input impedance:** $R_{in}\\approx \\infty$ (gate oxide isolation).\n* **Output impedance:** $R_{out}=r_{o1}\\parallel r_{o2}$, where $r_{o1}=1/(\\lambda_p I_{D1})$ and $r_{o2}=1/(\\lambda_n I_{D2})$.\n\nThe small-signal model has:\n* $M_1$ providing transconductance $g_{m1}=k'_p(V_{SG1}-|V_{thp}|)=\\sqrt{2k'_p I_{bias}}$\n* $M_2$ providing only its output resistance $r_{o2}$ (since $v_{gs2}=0$)\n\nApplying KCL at $V_{out}$:\n$$v_{out}\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right) = -g_{m1}v_{in}$$\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}\\,(r_{o1}\\parallel r_{o2})}$$\n\nThe negative sign confirms **inverting amplification**.\n\nIf an external load $R_L$ is connected:\n$$A_v = -g_{m1}\\big(r_{o1}\\parallel r_{o2}\\parallel R_L\\big)$$\n\n---\n\n## 3. Summary of Circuit Properties\n\n| Parameter | Expression / Value |\n|-----------|-------------------|\n| **Type** | Common-source amplifier with active load |\n| **Input device** | $M_1$ (PMOS) |\n| **Load device** | $M_2$ (NMOS current source, biased by $V_b$) |\n| **Input impedance** | $R_{in}\\to\\infty$ |\n| **Output impedance** | $R_{out}=r_{o1}\\parallel r_{o2}$ |\n| **Voltage gain** | $A_v=-g_{m1}(r_{o1}\\parallel r_{o2})$ |\n| **Bias current** | $I_{bias}\\approx \\frac{1}{2}k'_n(V_b-V_{thn})^2$ |\n\nThis topology is widely used in analog IC design (e.g., op-amp input stages) because it provides **high input impedance** and **moderate-to-high voltage gain** in a single stage, with the bias current precisely controlled by the DC gate voltage $V_b$.",
        "format": "markdown",
        "sha256": "ab0c73db83eda6a671472f597047cecb70532a2c714ac7d274f2f58e6dd0503c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a common-source stage and gives an inverting gain. It is an NMOS source follower with output at M1's source and positive gain near unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 12114,
        "total_tokens": 14219,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 12114,
        "total_tokens": 14219,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a **CMOS push-pull stage** consisting of:\n\n- **M₁**: PMOS transistor (source → VDD, drain → Vout, gate → Vin)\n- **M₂**: NMOS transistor (source → GND, drain → Vout, gate → Vb)\n\nThe output is taken at the common drain node. Because the gates are driven independently, this stage can operate either as a **logic inverter** (when Vin = Vb) or as a **common-source amplifier** (when one gate is AC-coupled and the other is DC-biased).\n\nAssume long-channel square-law models with:\n- NMOS: threshold Vthn > 0, transconductance parameter kₙ = μₙCₒₓ(W/L)₂\n- PMOS: threshold Vthp < 0 (|Vthp| > 0), parameter kₚ = μₚCₒₓ(W/L)₁\n- Body effect is absent (VSB = 0 for both).\n\n---\n\n## 1. DC Operating Regions\n\nDefine the gate-source conditions:\n- M₂ ON if Vb > Vthn; OFF if Vb < Vthn\n- M₁ ON if VDD – Vin > |Vthp| ⇒ Vin < VDD – |Vthp|; OFF if Vin > VDD – |Vthp|\n\nThere are **four regions**:\n\n| Region | M₁ (PMOS) | M₂ (NMOS) | Vout | Condition |\n|:------:|:---------:|:---------:|:----:|:---------|\n| **I** | OFF | OFF | **Floating** (high-Z) | Vin > VDD–|Vthp| and Vb < Vthn |\n| **II** | ON | OFF | **≈ VDD** | Vin < VDD–|Vthp| and Vb < Vthn |\n| **III** | OFF | ON | **≈ 0** | Vin > VDD–|Vthp| and Vb > Vthn |\n| **IV** | ON | ON | **Intermediate** (I_D1 = I_D2) | Vin < VDD–|Vthp| and Vb > Vthn |\n\nIn Regions II and III, the “off” transistor carries I_D ≈ 0, so the “on” transistor pulls Vout fully to its supply rail (ignoring leakage).\n\n---\n\n## 2. Region IV: Both Transistors ON\n\nSet I_D1 = I_D2 = I_D.\n\n**M₂ (NMOS):**\n- Cutoff: Vb < Vthn\n- Triode: Vb > Vthn and Vout > Vb – Vthn\n  $$I_{D2} = k_n\\left[(V_b-V_{thn})V_{out}-\\frac{1}{2}V_{out}^2\\right]$$\n- Saturation: Vb > Vthn and Vout ≤ Vb – Vthn\n  $$I_{D2} = \\frac{1}{2}k_n(V_b-V_{thn})^2$$\n\n**M₁ (PMOS):** Use VSG = VDD – Vin and VSD = VDD – Vout.\n- Cutoff: Vin > VDD – |Vthp|\n- Triode: Vin < VDD–|Vthp| and Vout > Vin + |Vthp|\n  $$I_{D1} = k_p\\left[(V_{DD}-V_{in}-|V_{thp}|)(V_{DD}-V_{out})-\\frac{1}{2}(V_{DD}-V_{out})^2\\right]$$\n- Saturation: Vin < VDD–|Vthp| and Vout ≤ Vin + |Vthp|\n  $$I_{D1} = \\frac{1}{2}k_p(V_{DD}-V_{in}-|V_{thp}|)^2$$\n\nSolving I_D1 = I_D2 in Region IV gives the exact Vout(Vin,Vb).\n\n---\n\n## 3. Special Case: CMOS Inverter (Vin = Vb = V_in)\n\nThis is the classic inverter transfer characteristic Vout(Vin).\n\n- **V_in < Vthn**: M₂ OFF, M₁ ON ⇒ **Vout = VDD**\n- **V_in > VDD – |Vthp|**: M₁ OFF, M₂ ON ⇒ **Vout = 0**\n- **Vthn < V_in < VDD – |Vthp|**: Both ON ⇒ solve I_D1 = I_D2.\n\nThe **switching threshold** V_M (where Vout = Vin = V_M) is found by setting both in saturation:\n$$\\sqrt{\\frac{k_n}{k_p}}\\,(V_M-V_{thn}) = V_{DD}-V_M-|V_{thp}|$$\n\n$$\\boxed{V_M = \\frac{V_{DD}-|V_{thp}|+\\sqrt{k_n/k_p}\\,V_{thn}}{1+\\sqrt{k_n/k_p}}}$$\n\nIf kₙ = kₚ and |Vthp| = Vthn = Vth, then V_M ≈ VDD/2.\n\n---\n\n## 4. Small-Signal Amplifier Analysis\n\nIf **Vb is a fixed DC bias** and **Vin carries a small AC signal v_in** (superimposed on DC bias V_in,Q), then M₂ acts as an **active load** and M₁ is the **common-source input transistor** (source at AC ground = VDD).\n\nSmall-signal model at Vout:\n- M₁: transconductance g_m1, output resistance r_o1\n- M₂: v_gs2 = 0 ⇒ g_m2 term is 0; only r_o2\n\nApplying KCL at Vout:\n$$g_{m1}v_{in} + v_{out}\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)=0$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}(r_{o1}\\parallel r_{o2})}$$\n\nIf instead **Vin is fixed DC** and **Vb carries v_in**, then M₂ is the input NMOS and:\n$$\\boxed{A_v = -g_{m2}(r_{o1}\\parallel r_{o2})}$$\n\nThe negative sign confirms **phase inversion**, as expected for a common-source stage.\n\n---\n\n## Summary\n\n- **Logic view** (Vin = Vb): CMOS inverter with high/low outputs and a well-defined switching threshold V_M.\n- **Analog view** (one gate AC, one DC): Single-stage common-source amplifier with active load; voltage gain is –g_m(r_o1||r_o2).\n- **Key feature**: In Region I (both OFF), Vout is high-impedance, which is useful for tri-state or dynamic logic applications.",
        "format": "markdown",
        "sha256": "ef7261ff053b80def49bf27450b55cae4e9a6cc38cb4fd0734fe4c9facebb6e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the topology and device connections: M1 is an NMOS source follower with output at its source, not a PMOS in a push-pull/common-source stage. The gain and operating analysis therefore do not apply.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 11835,
        "total_tokens": 13940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 11835,
        "total_tokens": 13940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **CMOS inverter** (a NOT gate).  \n- **M₁** is an n‑channel MOSFET (NMOS): source → ground, gate → Vᵢₙ, drain → Vₒᵤₜ.  \n- **M₂** is a p‑channel MOSFET (PMOS): source → V_DD, gate → Vᵢₙ, drain → Vₒᵤₜ.\n\nThe two drains are tied together at the output node, and both gates are driven by the same input Vᵢₙ.\n\n---\n\n## 1. DC Operating Regions (λ = 0)\n\nDenote  \n- Vₜₕₙ > 0 (NMOS threshold)  \n- Vₜₕₚ < 0 (PMOS threshold), |Vₜₕₚ| = –Vₜₕₚ  \n- kₙ = μₙCₒₓ(W/L)₁, kₚ = μₚCₒₓ(W/L)₂\n\n| Region | Condition on Vᵢₙ | M₁ (NMOS) | M₂ (PMOS) | Vₒᵤₜ |\n|--------|------------------|-----------|-----------|------|\n| **I** (Low input) | Vᵢₙ < Vₜₕₙ | Cutoff (I_D1 = 0) | On, triode (V_SD ≈ 0) | **≈ V_DD** |\n| **II** (Transition) | Vₜₕₙ ≤ Vᵢₙ ≤ V_DD + Vₜₕₚ | On (sat. or triode) | On (triode or sat.) | **Steep transition** |\n| **III** (High input) | Vᵢₙ > V_DD + Vₜₕₚ | On, triode (V_DS ≈ 0) | Cutoff (I_D2 = 0) | **≈ 0** |\n\nIn regions I and III there is **no DC path** from V_DD to ground, so the static power dissipation is essentially zero (only leakage).\n\n---\n\n## 2. Voltage Transfer Characteristic Vₒᵤₜ(Vᵢₙ)\n\nSet I_D1 = |I_D2|.\n\n### Region I\nM₁ is off ⇒ I_D1 = 0 ⇒ I_D2 = 0 ⇒ V_SD2 ≈ 0 ⇒  \n\\[\n\\boxed{V_{out}\\approx V_{DD}}\n\\]\n\n### Region III\nM₂ is off ⇒ |I_D2| = 0 ⇒ I_D1 = 0 ⇒ V_DS1 ≈ 0 ⇒  \n\\[\n\\boxed{V_{out}\\approx 0}\n\\]\n\n### Region II (both on)\n\n**M₁ saturation:** V_DS1 ≥ V_GS1 – Vₜₕₙ ⇒ Vₒᵤₜ ≥ Vᵢₙ – Vₜₕₙ  \n\\[\nI_{D1}=\\frac{1}{2}k_n(V_{in}-V_{thn})^2\n\\]\n\n**M₁ triode:** Vₒᵤₜ < Vᵢₙ – Vₜₕₙ  \n\\[\nI_{D1}=k_n\\Big[(V_{in}-V_{thn})V_{out}-\\frac{1}{2}V_{out}^2\\Big]\n\\]\n\n**M₂ saturation:** V_SD2 ≥ |V_SG2| – |Vₜₕₚ| ⇒ Vₒᵤₜ ≤ Vᵢₙ + |Vₜₕₚ|  \n\\[\n|I_{D2}|=\\frac{1}{2}k_p\\big(V_{DD}-V_{in}-|V_{thp}|\\big)^2\n\\]\n\n**M₂ triode:** Vₒᵤₜ > Vᵢₙ + |Vₜₕₚ|  \n\\[\n|I_{D2}|=k_p\\Big[(V_{DD}-V_{in}-|V_{thp}|)(V_{DD}-V_{out})-\\frac{1}{2}(V_{DD}-V_{out})^2\\Big]\n\\]\n\nBecause the two transistors are in series, I_D1 = |I_D2|. Solving gives the S‑shaped curve shown below.\n\n> **Note:** Both devices can be in saturation **only at one point** (when λ = 0). Everywhere else in Region II one is saturated and the other is in triode.\n\n---\n\n## 3. Switching Threshold V_M\n\nAt the point where Vᵢₙ = Vₒᵤₜ = V_M both are saturated. Setting I_D1 = |I_D2|:\n\n\\[\n\\frac{1}{2}k_n(V_M-V_{thn})^2 = \\frac{1}{2}k_p\\big(V_{DD}-V_M-|V_{thp}|\\big)^2\n\\]\n\nWith \\(r=\\sqrt{k_p/k_n}\\):\n\n\\[\n\\boxed{V_M = \\frac{r\\,(V_{DD}-|V_{thp}|)+V_{thn}}{1+r}}\n\\]\n\n**Symmetric inverter** (kₙ = kₚ and |Vₜₕₚ| = Vₜₕₙ = Vₜₕ):\n\n\\[\n\\boxed{V_M = \\frac{V_{DD}}{2}}\n\\]\n\n---\n\n## 4. Small‑Signal Voltage Gain\n\nAt V_M both devices are saturated. The small‑signal parameters are\n\n\\[\ng_{m1}=k_n(V_M-V_{thn}),\\qquad g_{m2}=k_p\\big(V_{DD}-V_M-|V_{thp}|\\big)\n\\]\n\n\\[\nr_{o1}=\\frac{1}{\\lambda_n I_D},\\qquad r_{o2}=\\frac{1}{|\\lambda_p|I_D}\n\\]\n\nThe voltage gain is\n\n\\[\n\\boxed{A_v = \\frac{dV_{out}}{dV_{in}}\\Big|_{V_M} = -(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})}\n\\]\n\nIf channel‑length modulation is ignored (λₙ = λₚ = 0 ⇒ rₒ → ∞):\n\n\\[\n\\boxed{|A_v|\\to\\infty \\quad\\text{(vertical transition at }V_M\\text{)}}\n\\]\n\nIn practice |Aᵥ| is very large (typically 10–100).\n\n---\n\n## 5. Noise Margins\n\nDefine:\n- V_OH ≈ V_DD\n- V_OL ≈ 0\n\nThe unity‑gain points V_IL and V_IH are found by solving |dVₒᵤₜ/dVᵢₙ| = 1 in Regions II‑a and II‑b.\n\nFor the **symmetric case** (kₙ=kₚ, |Vₜₕₚ|=Vₜₕₙ=Vₜₕ):\n\n\\[\nV_{IL}\\approx \\frac{3V_{DD}+2V_{th}}{8},\\qquad\nV_{IH}\\approx \\frac{5V_{DD}-2V_{th}}{8}\n\\]\n\n(Exact values require solving the quadratic current equation together with the derivative condition.)\n\nThen\n\n\\[\nNM_L = V_{IL}-V_{OL}\\approx V_{IL},\\qquad\nNM_H = V_{OH}-V_{IH}\\approx V_{DD}-V_{IH}\n\\]\n\nFor a well‑designed inverter NM_L ≈ NM_H ≈ V_DD/2 – Vₜₕ (approximately).\n\n---\n\n## 6. Power Consumption\n\n- **Static power:** P_stat ≈ 0 (no DC path except subthreshold/leakage currents).\n- **Dynamic power:** Charging/discharging the load capacitance C_L:\n  \\[\n  P_{dyn}=C_L V_{DD}^2 f\n  \\]\n- **Short‑circuit power:** During the brief transition both transistors are on:\n  \\[\n  P_{sc}=I_{sc,avg}\\,V_{DD}\\,f\n  \\]\n  where I_sc is the peak current through M₁ and M₂.\n\n---\n\n## 7. Logic Function\n\n| Vᵢₙ | M₁ | M₂ | Vₒᵤₜ | Logic |\n|-----|----|----|------|-------|\n| Low (≈0) | OFF | ON | High (≈V_DD) | **1** |\n| High (≈V_DD) | ON | OFF | Low (≈0) | **0** |\n\nHence the circuit performs the **inversion (NOT)** operation:\n\\[\n\\boxed{V_{out} = \\overline{V_{in}}}\n\\]\n\n---\n\n## Summary\n\nThe circuit is a **CMOS inverter**. It provides:\n- Full rail‑to‑rail swing (0 → V_DD),\n- Near‑zero static power,\n- Very high voltage gain near the switching threshold V_M,\n- Robust noise margins (especially when designed symmetrically).\n\nIt is the fundamental building block of CMOS digital logic.",
        "format": "markdown",
        "sha256": "267e124a40663298c6fa8fab4a28c68c2dc76fd8c253816db6b94526244f56d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and inverting operation. The extra noise-margin approximation is imprecise, but it does not contradict the inverter’s operation and does not reduce credit under the full-credit rule.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 16239,
        "total_tokens": 16852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 16239,
        "total_tokens": 16852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **CMOS inverter** (a complementary MOS logic gate).\n\n| Transistor | Type | Source | Drain | Gate |\n|------------|------|--------|-------|------|\n| **M₁** | NMOS | Ground | Vₒᵤₜ | Vᵢₙ |\n| **M₂** | PMOS | V_DD | Vₒᵤₜ | Vᵢₙ |\n\n- The gates of M₁ and M₂ are tied together → **input Vᵢₙ**\n- The drains are tied together → **output Vₒᵤₜ**\n- M₁ pulls the output **down** to GND; M₂ pulls it **up** to V_DD.\n\nBelow is a complete DC and AC analysis (square‑law model, channel‑length modulation λ ≈ 0 unless noted).\n\n---\n\n## 1. DC Analysis – Voltage Transfer Characteristic (VTC)\n\nDefine the overdrives:\n- NMOS:  Vₒᵥₙ = Vᵢₙ – Vₜₕₙ   (Vₜₕₙ > 0)\n- PMOS:  Vₒᵥₚ = V_DD – Vᵢₙ – |Vₜₕₚ|   (Vₜₕₚ < 0, |Vₜₕₚ| > 0)\n\nThe inverter operates in **five regions**:\n\n### Region I – M₁ OFF, M₂ ON (triode/linear)\n**Condition:** Vᵢₙ ≤ Vₜₕₙ\n\n- V_GS₁ ≤ Vₜₕₙ ⇒ I_D₁ = 0\n- V_SG₂ = V_DD – Vᵢₙ > |Vₜₕₚ| ⇒ M₂ conducts\n- No current ⇒ V_SD₂ ≈ 0 ⇒ **Vₒᵤₜ ≈ V_DD**\n\n### Region II – M₁ Saturation, M₂ Triode\n**Condition:** Vₜₕₙ < Vᵢₙ < V_M  and  Vₒᵤₜ > Vᵢₙ + |Vₜₕₚ|\n\nCurrent equality I_D₁ = I_D₂:\n\\[\n\\frac{1}{2}k_n(V_{in}-V_{thn})^2\n= k_p\\Big[(V_{DD}-V_{in}-|V_{thp}|)(V_{DD}-V_{out})-\\frac{1}{2}(V_{DD}-V_{out})^2\\Big]\n\\]\n\nSolving for Vₒᵤₜ:\n\\[\n\\boxed{V_{out}=V_{in}+|V_{thp}|+\\sqrt{(V_{DD}-V_{in}-|V_{thp}|)^2-\\frac{k_n}{k_p}(V_{in}-V_{thn})^2}}\n\\]\n\n### Region III – Both in Saturation (the “switching point”)\n**Condition:** Vᵢₙ ≈ V_M = Vₒᵤₜ\n\nHere I_D depends only on V_GS:\n\\[\n\\frac{1}{2}k_n(V_M-V_{thn})^2 = \\frac{1}{2}k_p(V_{DD}-V_M-|V_{thp}|)^2\n\\]\n\nThe **switching threshold** (where the inverter flips) is\n\\[\n\\boxed{V_M = \\frac{V_{DD}-|V_{thp}|+\\sqrt{k_n/k_p}\\,V_{thn}}{1+\\sqrt{k_n/k_p}}}\n\\]\n\n*Special case:* if kₙ = kₚ and Vₜₕₙ = |Vₜₕₚ| = Vₜₕ ⇒ **V_M = V_DD/2**.\n\nWith λ = 0 this region is a single point; with λ ≠ 0 it has a very steep but finite slope.\n\n### Region IV – M₁ Triode, M₂ Saturation\n**Condition:** V_M < Vᵢₙ < V_DD – |Vₜₕₚ|  and  Vₒᵤₜ < Vᵢₙ – Vₜₕₙ\n\nCurrent equality:\n\\[\nk_n\\Big[(V_{in}-V_{thn})V_{out}-\\frac{1}{2}V_{out}^2\\Big]\n= \\frac{1}{2}k_p(V_{DD}-V_{in}-|V_{thp}|)^2\n\\]\n\nSolving the quadratic for Vₒᵤₜ (choose the root with Vₒᵤₜ < Vᵢₙ – Vₜₕₙ):\n\\[\n\\boxed{V_{out}=(V_{in}-V_{thn})-\\sqrt{(V_{in}-V_{thn})^2-\\frac{k_p}{k_n}(V_{DD}-V_{in}-|V_{thp}|)^2}}\n\\]\n\n### Region V – M₁ ON (triode), M₂ OFF\n**Condition:** Vᵢₙ ≥ V_DD – |Vₜₕₚ|\n\n- V_SG₂ ≤ |Vₜₕₚ| ⇒ I_D₂ = 0\n- M₁ pulls the node to ground ⇒ **Vₒᵤₜ ≈ 0**\n\n---\n\n## 2. Summary of the VTC (Ideal, λ = 0)\n\n| Vᵢₙ range | M₁ | M₂ | Vₒᵤₜ |\n|-----------|----|----|------|\n| Vᵢₙ < Vₜₕₙ | Cutoff | Triode (I≈0) | **V_DD** |\n| Vₜₕₙ < Vᵢₙ < V_M | Saturation | Triode | **High → falling** (Region II eq.) |\n| Vᵢₙ ≈ V_M | Saturation | Saturation | **≈ V_M** (steep) |\n| V_M < Vᵢₙ < V_DD–|Vₜₕₚ| | Triode | Saturation | **Low → falling** (Region IV eq.) |\n| Vᵢₙ > V_DD–|Vₜₕₚ| | Triode | Cutoff | **≈ 0** |\n\nThe output swings **rail‑to‑rail**: 0 → V_DD.\n\n---\n\n## 3. Small‑Signal Voltage Gain\n\nBias the inverter at Vᵢₙ = Vₒᵤₜ = V_M (the point of maximum gain).\n\nSmall‑signal model (AC ground at V_DD and GND):\n- M₁: gₘ₁ vᵢₙ, rₒ₁ = 1/[λₙ I_D]\n- M₂: gₘ₂ vₛg₂ = gₘ₂ (–vᵢₙ) ⇒ effective current source –gₘ₂ vᵢₙ, rₒ₂ = 1/[λₚ I_D]\n\nThe voltage gain is\n\\[\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})}\n\\]\n\nWith λ = 0 ⇒ rₒ → ∞ ⇒ **|Aᵥ| → ∞** (ideal switch).  \nWith realistic λ (e.g., 0.1 V⁻¹) the gain is typically **–10 to –50** for a single inverter.\n\nThe transconductances at the bias point are\n\\[\ng_{m1}=k_n(V_M-V_{thn}),\\qquad g_{m2}=k_p(V_{DD}-V_M-|V_{thp}|)\n\\]\n\n---\n\n## 4. Noise Margins\n\nDefine:\n- V_OH ≈ V_DD,  V_OL ≈ 0\n- V_IL and V_IH are the input values where |dVₒᵤₜ/dVᵢₙ| = 1\n\nSolving |Aᵥ| = 1 together with the Region II / Region IV equations gives V_IL and V_IH.\n\nFor the **symmetric case** (kₙ = kₚ, Vₜₕₙ = |Vₜₕₚ| = Vₜₕ):\n\\[\nV_{IL}\\approx \\frac{3V_{DD}^2-4V_{DD}V_{th}-4V_{th}^2}{8(V_{DD}-2V_{th})},\\quad\nV_{IH}=V_{DD}-V_{IL}\\Big|_{\\text{symmetry}}\n\\]\n\nThe noise margins are\n\\[\nNM_L = V_{IL}-V_{OL}\\approx V_{IL},\\qquad\nNM_H = V_{OH}-V_{IH}\\approx V_{DD}-V_{IH}\n\\]\n\nBecause the transition is very steep, **NM_L ≈ NM_H ≈ 0.4–0.45 V_DD** for well‑matched devices, giving excellent noise immunity.\n\n---\n\n## 5. Power Consumption\n\n| Type | Expression / Value |\n|------|-------------------|\n| **Static (DC)** | P_static ≈ 0 (no direct path from V_DD to GND in steady state; only leakage) |\n| **Dynamic** | P_dyn = C_L V_DD² f  (C_L = load capacitance, f = switching frequency) |\n| **Short‑circuit** | During transition both transistors are briefly ON ⇒ a spike I_sc ≈ (1/12)k(V_DD–2Vₜₕ)³; average P_sc ∝ f |\n\nThus the CMOS inverter is prized for **near‑zero static power**.\n\n---\n\n## 6. Key Takeaways\n\n1. **Logic function:** Vₒᵤₜ = NOT Vᵢₙ (inverter).\n2. **Output swing:** Full rail‑to‑rail (0 to V_DD).\n3. **Switching point:** V_M ≈ V_DD/2 for matched devices.\n4. **Gain:** Extremely high near V_M ⇒ sharp transition and good noise margins.\n5. **Power:** Negligible static power; power is mainly dynamic (C·V²·f).\n\nIf you need a **numerical plot** or specific values (e.g., with kₙ, kₚ, Vₜₕ, V_DD given), substitute those parameters into the Region II–IV equations and the V_M formula above.",
        "format": "markdown",
        "sha256": "35d4ca4a3ee3da9acb3d08982477abccdfe147ccf213f408074940023e3bc84d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and shared input/output connections. The additional analysis is not required, and it does not contradict the inverter’s essential operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 17368,
        "total_tokens": 17981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 17368,
        "total_tokens": 17981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have two MOSFETs stacked between the supply rail $V_{DD}$ and ground, with the output taken at the intermediate node. Both gates are tied together to the input $V_{in}$.\n\n### 1. Circuit Identification\n- **$M_1$**: Source grounded $\\rightarrow$ **NMOS** (enhancement-mode)\n- **$M_2$**: Source at $V_{DD}$ $\\rightarrow$ **PMOS** (enhancement-mode)\n- Both gates connected to $V_{in}$; drains connected together at $V_{out}$\n\nThis is the classic **CMOS inverter** (NOT gate).\n\n---\n\n### 2. DC Logic Operation\n\n| $V_{in}$ | $M_1$ (NMOS) | $M_2$ (PMOS) | $V_{out}$ | Logic |\n|:---:|:---:|:---:|:---:|:---:|\n| **Low** ($\\approx 0$) | $V_{GS1}=0 < V_{thn}$ $\\Rightarrow$ **OFF** | $V_{SG2}=V_{DD} > |V_{thp}|$ $\\Rightarrow$ **ON** | $\\approx V_{DD}$ | **HIGH** |\n| **High** ($\\approx V_{DD}$) | $V_{GS1}=V_{DD} > V_{thn}$ $\\Rightarrow$ **ON** | $V_{SG2}=0 < |V_{thp}|$ $\\Rightarrow$ **OFF** | $\\approx 0$ | **LOW** |\n\nThus:\n$$V_{out} = \\overline{V_{in}}$$\n\n- **Low input**: $M_1$ is open, $M_2$ pulls $V_{out}$ up to $V_{DD}$.\n- **High input**: $M_2$ is open, $M_1$ pulls $V_{out}$ down to ground.\n\nBecause one transistor is always off in steady state, **static power dissipation is essentially zero** (only leakage current).\n\n---\n\n### 3. Voltage Transfer Characteristic (VTC)\n\nThe inverter has five operating regions as $V_{in}$ sweeps from $0$ to $V_{DD}$:\n\n1. **$V_{in} < V_{thn}$**: $M_1$ cutoff, $M_2$ linear $\\Rightarrow V_{out}\\approx V_{DD}$\n2. **$V_{thn} < V_{in} < V_{DD}-|V_{thp}|$**: $M_1$ saturation, $M_2$ linear $\\Rightarrow V_{out}$ falls sharply\n3. **$V_{in}\\approx V_{DD}/2$** (transition): Both in saturation $\\Rightarrow$ very high gain ($A_v \\ll -1$)\n4. **$V_{DD}-|V_{thp}| < V_{in} < V_{DD}$**: $M_1$ linear, $M_2$ cutoff $\\Rightarrow V_{out}\\approx 0$\n5. **$V_{in} > V_{DD}$**: Both conditions remain; $V_{out}=0$\n\nThe switching threshold $V_M \\approx \\frac{V_{DD}+V_{thn}-|V_{thp}|}{2}$ (for symmetric devices $\\approx V_{DD}/2$).\n\n---\n\n### 4. Key Features\n- **Full rail-to-rail swing**: $0 \\le V_{out} \\le V_{DD}$\n- **No static current path** between $V_{DD}$ and ground\n- **High noise margins**: $NM_H \\approx V_{DD}-V_{IH}$ and $NM_L \\approx V_{IL}$\n- **Symmetric drive**: Can source or sink current depending on load\n\n**Conclusion:** The circuit is a CMOS inverter that performs logical inversion with near-ideal digital characteristics and negligible static power consumption.",
        "format": "markdown",
        "sha256": "14c5ca65d1190197b9b7e36eca39c6f412ea83f9806b064c851240fad956d55a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes the complementary logic operation correctly, satisfying the full-credit rule.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 4885,
        "total_tokens": 5498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 4885,
        "total_tokens": 5498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **CMOS inverter** (a NOT gate).  \n- **M₁** is a **PMOS** transistor: source → VDD, drain → Vout, gate → Vin.  \n- **M₂** is an **NMOS** transistor: source → GND, drain → Vout, gate → Vin.  \n- The two drains are tied together at the output node **Vout**.\n\nBecause the gates are connected together and the drains are connected together, the circuit inverts the logic level applied at Vin.\n\n---\n\n## 1. Qualitative (Digital) Operation\n\n| Input Vin | M₁ (PMOS) | M₂ (NMOS) | Path to supply/ground | Vout |\n|-----------|-----------|-----------|----------------------|------|\n| **LOW** ≈ 0 | **ON** (VSG ≈ VDD > |Vthp|) | **OFF** (VGS ≈ 0 < Vthn) | VDD → M₁ → Vout | **HIGH** ≈ VDD |\n| **HIGH** ≈ VDD | **OFF** (VSG ≈ 0) | **ON** (VGS ≈ VDD > Vthn) | Vout → M₂ → GND | **LOW** ≈ 0 |\n\n- **Static power** is essentially zero: in either steady state one transistor is cut off, so there is no direct DC path from VDD to ground (ignoring leakage).\n- **Dynamic power** is consumed only during switching:  \n  \\(P \\approx C_L V_{DD}^2 f + I_{sc}V_{DD}\\), where \\(C_L\\) is the load capacitance, \\(f\\) the switching frequency, and \\(I_{sc}\\) the brief “shoot‑through” current when both devices are momentarily on.\n\n---\n\n## 2. DC Voltage Transfer Characteristic (VTC)\n\nAssume the standard square‑law model (neglecting channel‑length modulation for the basic curve):\n\n**NMOS (M₂):**\n\\[\nI_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS2}-V_{thn})^2 \\quad \\text{(sat.)}\n\\]\nwith \\(V_{GS2}=V_{in}\\) and \\(V_{DS2}=V_{out}\\).\n\n**PMOS (M₁):**\n\\[\n|I_{D1}| = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{SG1}-|V_{thp}|)^2 \\quad \\text{(sat.)}\n\\]\nwith \\(V_{SG1}=V_{DD}-V_{in}\\) and \\(V_{SD1}=V_{DD}-V_{out}\\).\n\nDefine \\(\\beta_n = \\mu_n C_{ox}(W/L)_2\\) and \\(\\beta_p = \\mu_p C_{ox}(W/L)_1\\).\n\n### Region I: \\(V_{in} < V_{thn}\\)\n- M₂ is **cutoff** (\\(I_{D2}=0\\)).\n- M₁ is **on** (triode/linear because \\(V_{SD1}\\approx 0\\)).\n- No current can flow, so \\(V_{out}\\) is pulled up to **VDD**.\n\n### Region III: \\(V_{in} > V_{DD}-|V_{thp}|\\)\n- M₁ is **cutoff** (\\(I_{D1}=0\\)).\n- M₂ is **on** (triode/linear because \\(V_{DS2}\\approx 0\\)).\n- \\(V_{out}\\) is pulled down to **0**.\n\n### Region II: \\(V_{thn} < V_{in} < V_{DD}-|V_{thp}|\\) (both on)\nSet \\(I_{D1}=I_{D2}=I_D\\).\n\n**Saturation conditions:**\n- M₂ sat.: \\(V_{out} \\ge V_{in}-V_{thn}\\)\n- M₁ sat.: \\(V_{out} \\le V_{in}+|V_{thp}|\\)\n\nIf both are saturated:\n\\[\n\\frac{\\beta_n}{2}(V_{in}-V_{thn})^2 = \\frac{\\beta_p}{2}(V_{DD}-V_{in}-|V_{thp}|)^2\n\\]\n\nSolving gives the **switching threshold** \\(V_M\\) (the point where \\(V_{in}=V_{out}=V_M\\)):\n\\[\n\\boxed{V_M = \\frac{V_{DD}-|V_{thp}|+\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,V_{thn}}{1+\\sqrt{\\frac{\\beta_n}{\\beta_p}}}}\n\\]\n\nIf the inverter is **symmetrical** (\\(\\beta_n=\\beta_p\\) and \\(V_{thn}=|V_{thp}|=V_{th}\\)):\n\\[\n\\boxed{V_M \\approx \\frac{V_{DD}}{2}}\n\\]\n\nThe VTC is a steep “S” curve centered near \\(V_M\\).\n\n---\n\n## 3. Small‑Signal Voltage Gain (Analog Amplifier View)\n\nIf the inverter is biased at \\(V_{in}=V_M\\) (both devices in saturation), it acts as a **common‑source amplifier with active load**.\n\nTransconductances:\n\\[\ng_{m2} = \\sqrt{2\\beta_n I_D}, \\qquad g_{m1} = \\sqrt{2\\beta_p I_D}\n\\]\n\nOutput resistances:\n\\[\nr_{o2} = \\frac{1}{\\lambda_n I_D}, \\qquad r_{o1} = \\frac{1}{|\\lambda_p| I_D}\n\\]\n\nThe small‑signal gain is:\n\\[\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_{m1}+g_{m2}}{g_{ds1}+g_{ds2}} \\approx -(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})}\n\\]\n\nBecause both \\(g_m\\)’s contribute with the same sign, the magnitude \\(|A_v|\\) is large (typically 10–100, depending on channel‑length modulation \\(\\lambda\\)).\n\n---\n\n## 4. Noise Margins\n\nDefine the points where \\(|dV_{out}/dV_{in}|=1\\) as \\(V_{IL}\\) and \\(V_{IH}\\).\n\n- \\(V_{OH} \\approx V_{DD}\\)\n- \\(V_{OL} \\approx 0\\)\n\nThen:\n\\[\nNM_H = V_{OH}-V_{IH}, \\qquad NM_L = V_{IL}-V_{OL}\n\\]\n\nFor a symmetric inverter (\\(V_M \\approx V_{DD}/2\\)):\n\\[\nNM_H \\approx NM_L \\approx \\frac{V_{DD}}{2} - \\Delta\n\\]\nwhere \\(\\Delta\\) depends on the transistor ratios. A well‑designed inverter has \\(NM_H, NM_L > 0\\) and as large as possible (ideally \\(\\approx V_{DD}/2\\) each).\n\n---\n\n## 5. Summary of Key Features\n\n| Feature | Value / Behavior |\n|---------|------------------|\n| **Logic function** | Inverter (NOT) |\n| **Static current** | ≈ 0 (very low power) |\n| **Output swing** | Rail‑to‑rail: 0 to VDD |\n| **Switching point** | \\(V_M \\approx V_{DD}/2\\) (if symmetric) |\n| **Gain in transition** | Large negative (\\(|A_v| \\gg 1\\)) |\n| **Input impedance** | Very high (capacitive gate oxide) |\n| **Output impedance** | Low (driven by on‑transistor) |\n\n---\n\n### Bottom Line\nThe circuit is a **CMOS inverter**. It provides full rail‑to‑rail output swing, negligible static power dissipation, high input impedance, and a sharp transition centered near \\(V_{DD}/2\\) (for matched devices). It is the fundamental building block of CMOS digital logic and can also serve as a high‑gain analog amplifier when biased in its transition region.",
        "format": "markdown",
        "sha256": "86d72703bd46a0dc5de1017712cb749d6ae1cec7a1ea50dcc3f93ef7f9e55f7e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires both devices to be identified as NMOS; this topology error triggers the zero-score rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 7208,
        "total_tokens": 7821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 7208,
        "total_tokens": 7821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **CMOS inverter** (complementary MOS inverter).  \n- **M₁** is a **PMOS** transistor: source → VDD, drain → Vout, gate → Vin, body → VDD.  \n- **M₂** is an **NMOS** transistor: source → GND, drain → Vout, gate → Vin, body → GND.\n\nBoth gates are tied together to the input node **Vᵢₙ**, and the two drains are connected together at the output node **Vₒᵤₜ**.\n\n---\n\n## 1. Qualitative (Logic) Operation\n\n| Input Vᵢₙ | M₁ (PMOS) | M₂ (NMOS) | Output Vₒᵤₜ | Logic |\n|----------|-----------|-----------|-------------|-------|\n| LOW ≈ 0  | **ON** (VSG ≈ VDD > |Vthp|) | **OFF** (VGS ≈ 0 < Vthn) | Pulled up to **VDD** | HIGH = **1** |\n| HIGH ≈ VDD | **OFF** (VSG ≈ 0) | **ON** (VGS ≈ VDD > Vthn) | Pulled down to **0** | LOW = **0** |\n\nBecause one transistor is always off in the steady state, the circuit performs the **NOT** (inversion) function:\n$$V_{out} = \\overline{V_{in}}$$\n\n---\n\n## 2. DC Voltage Transfer Characteristic (VTC)\n\nDefine the overdrive voltages:\n- NMOS: $V_{ovn}=V_{in}-V_{thn}$\n- PMOS: $V_{ovp}=V_{DD}-V_{in}-|V_{thp}|$\n\nThe current through both devices is equal ($I_{D1}=I_{D2}=I_D$). Depending on $V_{in}$, each transistor can be in **cutoff**, **triode** (linear), or **saturation**.\n\n### Region I: $V_{in}<V_{thn}$\n- M₂ is **cutoff** ($I_{D2}=0$).\n- M₁ is **on** (triode or saturation, but $I_{D1}=0$ because M₂ is open).\n- $\\boxed{V_{out}\\approx V_{DD}}$\n\n### Region II: $V_{thn}<V_{in}<V_{DD}-|V_{thp}|$\nBoth transistors are **on**; current flows from VDD to ground.\n\n| Sub-region | M₂ (NMOS) | M₁ (PMOS) | Condition on $V_{out}$ |\n|------------|-----------|-----------|------------------------|\n| II-a | Saturation | Triode | $V_{out}>V_{in}+|V_{thp}|$ |\n| II-b | Saturation | Saturation | $V_{out}\\approx V_{in}+|V_{thp}|$ (near switch point) |\n| II-c | Triode | Saturation | $V_{out}<V_{in}-V_{thn}$ |\n\nSolving $I_{D1}=I_{D2}$ gives $V_{out}(V_{in})$. The curve is steep in the middle.\n\n### Region III: $V_{in}>V_{DD}-|V_{thp}|$\n- M₁ is **cutoff**.\n- M₂ is **on** (triode or saturation).\n- $\\boxed{V_{out}\\approx 0}$\n\nThe resulting VTC is a sharp “S” curve centered near the **inverter threshold voltage** $V_M$.\n\n---\n\n## 3. Inverter Threshold (Switching Point) $V_M$\n\nAt $V_M$ we have $V_{in}=V_{out}=V_M$ and both devices are in saturation ($\\lambda=0$):\n\n$$\\frac{k_n}{2}(V_M-V_{thn})^2 = \\frac{k_p}{2}(V_{DD}-V_M-|V_{thp}|)^2$$\n\nwhere $k_{n,p}=\\mu_{n,p}C_{ox}(W/L)_{n,p}$.\n\nSolving:\n$$\\boxed{V_M = \\frac{V_{DD}-|V_{thp}|+\\sqrt{k_n/k_p}\\,V_{thn}}{1+\\sqrt{k_n/k_p}}}$$\n\n**Symmetric case** ($k_n=k_p$ and $V_{thn}=|V_{thp}|=V_{th}$):\n$$\\boxed{V_M = \\frac{V_{DD}}{2}}$$\n\n---\n\n## 4. Small-Signal Voltage Gain\n\nIn the transition region ($V_{in}\\approx V_M$) the inverter acts as a high-gain amplifier.\n\nWith channel-length modulation ($\\lambda_n,\\lambda_p\\neq 0$):\n$$g_{m1}=k_p(V_{DD}-V_M-|V_{thp}|),\\quad g_{m2}=k_n(V_M-V_{thn})$$\n$$g_{o1}=\\lambda_p I_D,\\quad g_{o2}=\\lambda_n I_D$$\n\nThe small-signal gain is\n$$\\boxed{A_v = \\left.\\frac{dV_{out}}{dV_{in}}\\right|_{V_M} = -\\frac{g_{m1}+g_{m2}}{g_{o1}+g_{o2}}}$$\n\nFor long-channel devices ($\\lambda\\to 0$), $|A_v|\\to\\infty$ (ideal step). For short-channel devices, $|A_v|$ is large but finite (typically 10–50).\n\n---\n\n## 5. Noise Margins\n\nDefine $V_{IL}$ and $V_{IH}$ as the points where $|dV_{out}/dV_{in}|=1$.\n\nFor a **symmetric inverter** ($k_n=k_p$, $V_{thn}=|V_{thp}|=V_{th}$):\n$$\\boxed{V_{IL}=\\frac{3V_{DD}+2V_{th}}{8}},\\qquad \\boxed{V_{IH}=\\frac{5V_{DD}-2V_{th}}{8}}$$\n\nHence the noise margins are equal:\n$$\\boxed{NM_L = NM_H = V_{IL} = \\frac{3V_{DD}+2V_{th}}{8}}$$\n\nA large noise margin requires $V_{th}\\ll V_{DD}$ and $k_n\\approx k_p$.\n\n---\n\n## 6. Power Consumption\n\n- **Static power:** In steady state one transistor is always off, so $I_{DD}\\approx 0$ (ignoring subthreshold and gate leakage).  \n  $$P_{static}\\approx 0$$\n\n- **Dynamic power:** Occurs only during switching, charging/discharging the load capacitance $C_L$:\n  $$\\boxed{P_{dyn}=f\\,C_L V_{DD}^2}$$\n  where $f$ is the switching frequency.\n\nThere is also a brief **short-circuit (crowbar) current** during the transition when both devices are momentarily on.\n\n---\n\n## 7. Summary\n\n| Feature | Value / Behavior |\n|---------|------------------|\n| **Function** | Digital inverter ($V_{out}=\\overline{V_{in}}$) |\n| **Logic levels** | $V_{OH}\\approx V_{DD}$, $V_{OL}\\approx 0$ |\n| **Switch point** | $V_M\\approx V_{DD}/2$ (if symmetric) |\n| **Gain** | Very high near $V_M$ |\n| **Static power** | Negligible |\n| **Dynamic power** | $fC_LV_{DD}^2$ |\n\nThus, the circuit is the fundamental building block of CMOS digital logic, providing full rail-to-rail swing, excellent noise immunity, and near-zero static power dissipation.",
        "format": "markdown",
        "sha256": "408f4f8693e91177aefa6e252becaca400a5035603f52e50d382dd370e49b7e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter; the golden solution identifies both devices as NMOS, so this receives 0 under the scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 14723,
        "total_tokens": 15336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 14723,
        "total_tokens": 15336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **CMOS inverter** (NOT gate):\n\n* **M₁** – PMOS transistor (source → VDD, drain → Vout, gate → Vin)  \n* **M₂** – NMOS transistor (source → GND, drain → Vout, gate → Vin)\n\nThe gates of both devices are tied together at the input node **Vin**, and their drains are connected together at the output node **Vout**.\n\n---\n\n## 1. Logic Function\n\n| Vin | M₂ (NMOS) | M₁ (PMOS) | Vout | Logic |\n|-----|-----------|-----------|------|-------|\n| Low (≈ 0) | **Cut‑off** (Vgs < Vtn) | **On** (Vsg > |Vtp|) | ≈ VDD | **1** |\n| High (≈ VDD) | **On** (Vgs > Vtn) | **Cut‑off** (Vsg < |Vtp|) | ≈ 0 | **0** |\n\nBecause one transistor is always off in the steady state, there is **no direct DC path** from VDD to ground.\n\n\\[\n\\boxed{V_{\\text{out}} = \\overline{V_{\\text{in}}}}\n\\]\n\n---\n\n## 2. DC Transfer Characteristic (VTC)\n\nDefine the transistor parameters:\n* NMOS: threshold Vtn > 0, conduction parameter \\(k_n=\\mu_n C_{ox}(W/L)_2\\)\n* PMOS: threshold Vtp < 0 (|Vtp|), conduction parameter \\(k_p=\\mu_p C_{ox}(W/L)_1\\)\n\nThe current equations (ignoring channel‑length modulation, λ = 0) are:\n\n**NMOS (M₂)**\n\\[\nI_{D2}=\n\\begin{cases}\n0 & V_{gs2}<V_{tn}\\\\[4pt]\nk_n\\!\\left[(V_{in}-V_{tn})V_{out}-\\dfrac{V_{out}^2}{2}\\right] & \\text{triode}\\\\[8pt]\n\\dfrac{1}{2}k_n(V_{in}-V_{tn})^2 & \\text{saturation}\n\\end{cases}\n\\]\n\n**PMOS (M₁)** (using magnitudes, source at VDD)\n\\[\nI_{D1}=\n\\begin{cases}\n0 & V_{sg1}<|V_{tp}|\\\\[4pt]\nk_p\\!\\left[(V_{DD}-V_{in}-|V_{tp}|)(V_{DD}-V_{out})-\\dfrac{(V_{DD}-V_{out})^2}{2}\\right] & \\text{triode}\\\\[8pt]\n\\dfrac{1}{2}k_p(V_{DD}-V_{in}-|V_{tp}|)^2 & \\text{saturation}\n\\end{cases}\n\\]\n\nSet \\(I_{D1}=I_{D2}\\) and solve for Vout(Vin). There are **five operating regions**:\n\n### Region I: \\(V_{in}<V_{tn}\\)\nM₂ is cut‑off, M₁ is on (triode, since Vsd ≈ 0).  \nNo current flows ⇒ **Vout = VDD**.\n\n### Region II: \\(V_{tn}<V_{in}<V_{DD}-|V_{tp}|\\) (both on)\nThis is the transition region.\n\n* **IIa** (\\(V_{out}>V_{in}-V_{tn}\\)): M₂ in **saturation**, M₁ in **triode**.\n* **IIb** (near the center): **Both in saturation**. This occurs at the switching point.\n* **IIc** (\\(V_{out}<V_{in}-V_{tn}\\) but still high enough): M₂ in **triode**, M₁ in **saturation**.\n\nIn this region Vout falls sharply from VDD toward 0.\n\n### Region III: \\(V_{in}>V_{DD}-|V_{tp}|\\)\nM₁ is cut‑off, M₂ is on (triode, since Vds ≈ 0).  \nNo current ⇒ **Vout ≈ 0**.\n\nThe resulting curve is the classic inverter “S‑curve”:\n\n```\nVout\n VDD |      _______\n     |     /\n     |    /\n VM  |---●--------  ← steep transition\n     |            \\\n  0  |             \\______\n     +-------------------- Vin\n      0   VIL  VM  VIH  VDD\n```\n\n---\n\n## 3. Switching Threshold \\(V_M\\)\n\n\\(V_M\\) is defined as the point where \\(V_{out}=V_{in}=V_M\\) and both devices are in saturation.\n\nSet \\(I_{D1}=I_{D2}\\):\n\n\\[\n\\frac{1}{2}k_p(V_{DD}-V_M-|V_{tp}|)^2 = \\frac{1}{2}k_n(V_M-V_{tn})^2\n\\]\n\nSolving for \\(V_M\\):\n\n\\[\n\\boxed{V_M = \\frac{V_{DD}+V_{tp}+\\gamma V_{tn}}{1+\\gamma}}\n\\qquad\\text{with}\\qquad\n\\gamma = \\sqrt{\\frac{k_n}{k_p}} = \\sqrt{\\frac{(W/L)_n\\mu_n}{(W/L)_p\\mu_p}}\n\\]\n\n* **Symmetric inverter** (\\(\\gamma=1\\) and \\(V_{tn}=|V_{tp}|=V_t\\)):\n  \\[\n  \\boxed{V_M = \\frac{V_{DD}}{2}}\n  \\]\n\n---\n\n## 4. Small‑Signal Voltage Gain (in Region IIb)\n\nDifferentiate the current equality with \\(\\lambda=0\\). The transconductances are\n\n\\[\ng_{m1}=\\sqrt{2k_p I_D},\\qquad g_{m2}=\\sqrt{2k_n I_D}\n\\]\n\nWith channel‑length modulation (\\(g_{ds}= \\lambda I_D\\)):\n\n\\[\n\\boxed{A_v = \\frac{dV_{out}}{dV_{in}}\\Big|_{V_M} \\approx -\\frac{g_{m1}+g_{m2}}{g_{ds1}+g_{ds2}}}\n\\]\n\nIf \\(\\lambda\\to 0\\), \\(|A_v|\\to\\infty\\) (ideal infinite gain at the switching point). In practice \\(|A_v|\\) is typically **20–50 dB** (10–300).\n\n---\n\n## 5. Noise Margins\n\nThe logic thresholds \\(V_{IL}\\) and \\(V_{IH}\\) are defined where \\(|dV_{out}/dV_{in}|=1\\).\n\nSolving the system \\(\\{I_{D1}=I_{D2},\\; dV_{out}/dV_{in}=-1\\}\\) gives (for \\(\\lambda=0\\)):\n\n\\[\n\\boxed{V_{IL} = \\frac{1}{1+\\gamma}\\Bigl[V_{DD}-|V_{tp}|+\\gamma V_{tn} + \\sqrt{\\bigl(V_{DD}-|V_{tp}|+\\gamma V_{tn}\\bigr)^2 - \\dots}\\Bigr]}\n\\]\n\n\\[\n\\boxed{V_{IH} = \\frac{1}{1+\\gamma}\\Bigl[V_{DD}+|V_{tp}|+\\gamma(V_{DD}+V_{tn}) - \\dots\\Bigr]}\n\\]\n\nThe noise margins are then\n\n\\[\nNM_L = V_{IL}-V_{OL}\\approx V_{IL},\\qquad\nNM_H = V_{OH}-V_{IH}\\approx V_{DD}-V_{IH}\n\\]\n\nFor a symmetric inverter (\\(\\gamma=1,\\;V_{tn}=|V_{tp}|\\)) they are equal:\n\\(NM_L = NM_H \\approx \\frac{V_{DD}}{2}-V_t\\) (approximately).\n\n---\n\n## 6. Power Dissipation\n\n* **Static power:** \\(P_{static}\\approx 0\\) (no DC current path except for leakage).\n* **Dynamic power:** Charging/discharging the load capacitance \\(C_L\\):\n  \\[\n  \\boxed{P_{dyn}=C_L V_{DD}^2 f + I_{sc}V_{DD}}\n  \\]\n  where \\(f\\) is the switching frequency and \\(I_{sc}\\) is the brief short‑circuit current that flows when both transistors are on during a transition.\n\n---\n\n## Summary\n\nThe circuit is a **CMOS inverter**. It inverts the input logic level with near‑rail‑to‑rail output swing (\\(0\\) to \\(V_{DD}\\)), has **zero static power**, and exhibits a very steep transition centered at \\(V_M\\) (ideally \\(V_{DD}/2\\) for symmetric design). Its high gain in the transition region makes it suitable both as a digital logic gate and, when biased near \\(V_M\\), as a high‑gain analog amplifier stage.",
        "format": "markdown",
        "sha256": "b02f8dae8b3f6b3d6677b2e4b7c1e19c034c2bff13bcde6840fc56f0866a88d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter. The golden solution requires recognizing that both devices are NMOS; this topology error triggers the scoring gate.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 15460,
        "total_tokens": 16073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 15460,
        "total_tokens": 16073,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit contains two MOSFETs:\n\n* **M₁** – NMOS transistor: source grounded, gate driven by $V_{\\mathrm{in}}$, drain at $V_{\\mathrm{out}}$.\n* **M₂** – PMOS transistor: source at $V_{DD}$, drain at $V_{\\mathrm{out}}$, and **gate tied to its drain** ($V_{\\mathrm{out}}$).  \n  Hence M₂ is **diode‑connected** and acts as a nonlinear active load.\n\nThis is a **common‑source (CS) amplifier with a diode‑connected PMOS load**.\n\n---\n\n## 1. DC Transfer Characteristic $V_{\\mathrm{out}}(V_{\\mathrm{in}})$\n\nDefine the device parameters  \n$K_n=\\tfrac12\\mu_nC_{ox}(W/L)_1$, $K_p=\\tfrac12\\mu_pC_{ox}(W/L)_2$,  \nthreshold voltages $V_{THN}>0$ and $V_{THP}<0$ (let $|V_{THP}|=-V_{THP}$), and channel‑length modulation $\\lambda_1,\\lambda_2$ (often ignored for hand analysis).\n\nBecause M₂ is diode‑connected ($V_{SG2}=V_{SD2}=V_{DD}-V_{\\mathrm{out}}$), it is **always in saturation** whenever it is on.\n\nSet $I_{D1}=I_{D2}$ at the $V_{\\mathrm{out}}$ node.\n\n### Region I – M₁ cut‑off ($V_{\\mathrm{in}}<V_{THN}$)\n$I_{D1}=0 \\Rightarrow I_{D2}=0 \\Rightarrow V_{DD}-V_{\\mathrm{out}}=|V_{THP}|$\n\n$$\\boxed{V_{\\mathrm{out}} \\approx V_{DD}-|V_{THP}|}$$\n\n(M₁ is open; M₂ sits at the edge of cutoff.)\n\n### Region II – Both in saturation\nConditions: $V_{\\mathrm{in}}>V_{THN}$ and $V_{\\mathrm{out}}>V_{\\mathrm{in}}-V_{THN}$.\n\n$$\n\\begin{aligned}\nI_{D1} &= K_n\\bigl(V_{\\mathrm{in}}-V_{THN}\\bigr)^2 \\\\\nI_{D2} &= K_p\\bigl(V_{DD}-V_{\\mathrm{out}}-|V_{THP}|\\bigr)^2\n\\end{aligned}\n$$\n\nEquating them:\n\n$$\nV_{DD}-V_{\\mathrm{out}}-|V_{THP}| = \\sqrt{\\frac{K_n}{K_p}}\\;\\bigl(V_{\\mathrm{in}}-V_{THN}\\bigr) $$\n\n$$\\boxed{V_{\\mathrm{out}} = V_{DD}-|V_{THP}|-\\sqrt{\\frac{K_n}{K_p}}\\;\\bigl(V_{\\mathrm{in}}-V_{THN}\\bigr)}$$\n\nThis is a **straight line** with slope $-\\sqrt{K_n/K_p}$.\n\nThe boundary with Region III occurs when $V_{\\mathrm{out}}=V_{\\mathrm{in}}-V_{THN}$, i.e.\n\n$$V_{\\mathrm{in,max}} = V_{THN}+\\frac{V_{DD}-|V_{THP}|}{1+\\sqrt{K_n/K_p}}$$\n\n### Region III – M₁ in triode, M₂ in saturation\nHere $V_{\\mathrm{in}}>V_{\\mathrm{in,max}}$ so $V_{\\mathrm{out}}<V_{\\mathrm{in}}-V_{THN}$.\n\n$$\nI_{D1}=K_n\\Bigl[(V_{\\mathrm{in}}-V_{THN})V_{\\mathrm{out}}-\\tfrac12V_{\\mathrm{out}}^2\\Bigr]\n$$\n\nSet equal to $I_{D2}=K_p(V_{DD}-V_{\\mathrm{out}}-|V_{THP}|)^2$ and solve the resulting quadratic/cubic for $V_{\\mathrm{out}}$.  \nAs $V_{\\mathrm{in}}\\to\\infty$, $V_{\\mathrm{out}}\\to 0$.\n\n---\n\n## 2. Small‑Signal Analysis (around a DC bias point $Q$)\n\nSmall‑signal model (AC ground at $V_{DD}$ and ground):\n\n* **M₁**: transconductance $g_{m1}$, output resistance $r_{o1}=1/(\\lambda_1 I_{DQ})$\n* **M₂**: because gate and drain are both at $v_{\\mathrm{out}}$ and source is AC ground, its impedance is  \n  $Z_{M2}= \\dfrac{1}{g_{m2}}\\parallel r_{o2}= \\dfrac{1}{g_{m2}+g_{o2}}$\n\nwhere  \n$g_{m1}=2I_{DQ}/V_{OV1}$ (sat.) or $K_nV_{DS1,Q}$ (triode),  \n$g_{m2}=2I_{DQ}/|V_{OV2}|$, and $g_{o i}=1/r_{o i}$.\n\nApply KCL at $v_{\\mathrm{out}}$:\n\n$$\n\\bigl(g_{m1}v_{\\mathrm{in}}+\\frac{v_{\\mathrm{out}}}{r_{o1}}\\bigr)+v_{\\mathrm{out}}(g_{m2}+g_{o2})=0\n$$\n\n### Voltage Gain\n$$\n\\boxed{A_v=\\frac{v_{\\mathrm{out}}}{v_{\\mathrm{in}}}= -\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}} \\approx -\\frac{g_{m1}}{g_{m2}}}\n$$\n\nIf both are in saturation:\n$$\n\\frac{g_{m1}}{g_{m2}}=\\sqrt{\\frac{K_n}{K_p}}=\\sqrt{\\frac{(W/L)_1\\mu_n}{(W/L)_2\\mu_p}}\n$$\n\nSo\n$$\n|A_v|\\approx\\sqrt{\\frac{(W/L)_1\\mu_n}{(W/L)_2\\mu_p}}\n$$\n\nThe gain is **negative** (inverting) and typically of order $1$–$10$ (much smaller than the intrinsic gain $g_m r_o$ of a resistive‑load CS stage).\n\n### Input Resistance\nThe gate of M₁ is oxide‑isolated:\n$$\n\\boxed{R_{\\mathrm{in}}=\\infty}\n$$\n\n### Output Resistance\nSet $v_{\\mathrm{in}}=0$ and apply a test source at $V_{\\mathrm{out}}$:\n\n$$\n\\boxed{R_{\\mathrm{out}}=\\frac{1}{g_{m2}+g_{o1}+g_{o2}}\\approx\\frac{1}{g_{m2}}}\n$$\n\n---\n\n## 3. Summary of Circuit Behavior\n\n| Feature | Value / Expression |\n|---|---|\n| **Type** | Common‑source amplifier with diode‑connected PMOS load |\n| **DC bias** | $I_{DQ}=K_p(V_{DD}-V_{\\mathrm{out,Q}}-|V_{THP}|)^2$ |\n| **Transfer curve** | Linear (Region II) with slope $-\\sqrt{K_n/K_p}$; flat near $V_{DD}-|V_{THP}|$ (Region I); nonlinear near ground (Region III) |\n| **Small‑signal gain** | $A_v\\approx -\\sqrt{(W/L)_1\\mu_n/[(W/L)_2\\mu_p]}$ |\n| **Input impedance** | Infinite (capacitive only) |\n| **Output impedance** | $\\approx 1/g_{m2}$ (low, typically kΩ range) |\n\nBecause the load is diode‑connected, the stage has **low voltage gain** but offers **good linearity** over a limited swing and a **well‑defined, low output impedance**. It is often used as a **level shifter**, **active load in current mirrors**, or in **low‑gain analog buffers**.",
        "format": "markdown",
        "sha256": "2f6a36f37c67e42fac7de94dd44e9b1b02d81148cf61469c5df90586d5dd68d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output conductances included, equivalent to the golden expression. The extra large-signal discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 16550,
        "total_tokens": 18060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 16550,
        "total_tokens": 18060,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14769,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have two MOSFETs:\n\n* **M₁**: NMOS with source grounded, gate = V_in, drain = V_out\n* **M₂**: PMOS with source at V_DD, drain at V_out, and **gate tied to its drain** (V_out) — i.e., a **diode-connected PMOS load**\n\nThis is the classic **common-source amplifier with an active (diode-connected) load**.\n\n---\n\n## 1. DC Transfer Characteristic (V_out vs. V_in)\n\nUse the square-law model (ignoring channel-length modulation, λ ≈ 0 for now):\n\n**M₁ (NMOS):**\n$$I_{D1} = \\frac{1}{2}k_n(V_{GS1}-V_{thn})^2 = \\frac{1}{2}k_n(V_{in}-V_{thn})^2 \\quad (\\text{saturation})$$\n$$I_{D1} = k_n\\left[(V_{in}-V_{thn})V_{out}-\\frac{V_{out}^2}{2}\\right] \\quad (\\text{triode})$$\n\n**M₂ (PMOS):** Since gate = drain = V_out and source = V_DD,\n$$V_{SG2} = V_{DD}-V_{out}, \\quad V_{SD2}=V_{DD}-V_{out} \\Rightarrow V_{SD2}=V_{SG2}$$\nThus M₂ is **always in saturation** (if on):\n$$I_{D2} = \\frac{1}{2}k_p(V_{DD}-V_{out}-|V_{thp}|)^2$$\n\nSet I_D1 = I_D2.\n\n### Region I: M₁ Cutoff (V_in ≤ V_thn)\nI_D1 = 0 ⇒ I_D2 = 0 ⇒ V_SG2 = |V_thp|\n$$\\boxed{V_{out} = V_{DD}-|V_{thp}|}$$\n\n### Region II: Both in Saturation\n$$\\frac{1}{2}k_n(V_{in}-V_{thn})^2 = \\frac{1}{2}k_p(V_{DD}-V_{out}-|V_{thp}|)^2$$\n\nSolving for V_out:\n$$\\boxed{V_{out} = V_{DD}-|V_{thp}|-\\sqrt{\\frac{k_n}{k_p}}\\,(V_{in}-V_{thn})}$$\n\nThis is a **straight line** with slope $-\\sqrt{k_n/k_p}$.  \nValid when $V_{out} \\ge V_{in}-V_{thn}$.\n\n### Region III: M₁ in Triode, M₂ in Saturation\nSolve:\n$$k_n\\left[(V_{in}-V_{thn})V_{out}-\\frac{V_{out}^2}{2}\\right] = \\frac{1}{2}k_p(V_{DD}-V_{out}-|V_{thp}|)^2$$\n\nThis gives a quadratic in V_out; V_out falls nonlinearly toward 0 as V_in increases.\n\n> **Key point:** Because V_SD2 = V_SG2, the diode-connected PMOS can never enter triode.\n\n---\n\n## 2. Small-Signal Analysis\n\nAt the DC operating point (Region II), compute transconductances:\n$$g_{m1} = k_n(V_{GS1}-V_{thn}) = \\sqrt{2k_n I_D}$$\n$$g_{m2} = k_p(V_{SG2}-|V_{thp}|) = \\sqrt{2k_p I_D}$$\n\nOutput resistances (if λ ≠ 0):\n$$r_{o1} = \\frac{1}{\\lambda_1 I_D}, \\quad r_{o2} = \\frac{1}{\\lambda_2 I_D}$$\n\n**Small-signal equivalent:**\n* V_DD → AC ground\n* M₁: current source $g_{m1}v_{in}$ in parallel with $r_{o1}$ (drain to ground)\n* M₂: diode-connected ⇒ impedance $\\frac{1}{g_{m2}} \\parallel r_{o2}$ from V_out to ground\n\n**Input resistance:**\n$$\\boxed{R_{in} = \\infty} \\quad (\\text{MOSFET gate})$$\n\n**Output resistance:**\n$$\\boxed{R_{out} = \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2}}$$\n\n**Voltage gain** (KCL at V_out):\n$$v_{out}\\left(g_{m2}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right) = -g_{m1}v_{in}$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_{m1}}{g_{m2}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}}}$$\n\nIf channel-length modulation is negligible ($r_o \\to \\infty$):\n$$\\boxed{A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{k_n}{k_p}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}}$$\n\n---\n\n## 3. Summary of Key Results\n\n| Parameter | Expression |\n|-----------|------------|\n| **Circuit type** | Common-source amp with diode-connected PMOS load |\n| **DC slope (Region II)** | $-\\sqrt{\\mu_n(W/L)_1 / \\mu_p(W/L)_2}$ |\n| **Voltage gain** | $A_v \\approx -\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}$ (ignoring λ) |\n| **Input resistance** | $R_{in} = \\infty$ |\n| **Output resistance** | $R_{out} \\approx 1/g_{m2}$ (dominant term) |\n\nThis circuit provides **moderate voltage gain** (typically |A_v| ≈ 1–10 depending on sizing) with very high input impedance, and is widely used in analog IC design (e.g., as a gain stage or in current-mirror loads).",
        "format": "markdown",
        "sha256": "68e9db9e8b341f3a4ac11d770a34ecd0a7eb1bfa6ea70bf757dfc76421c3e440"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation included consistently for both devices, equivalent to the required parallel-resistance form.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 12781,
        "total_tokens": 14291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 12781,
        "total_tokens": 14291,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have:\n\n- **M₁**: NMOS transistor with gate = $V_{in}$, source = GND, drain = $V_{out}$\n- **M₂**: PMOS transistor with source = $V_{DD}$, drain = $V_{out}$, and **gate tied to its drain** ($V_{out}$) → **diode-connected PMOS load**\n- Output is taken at the common drain node $V_{out}$\n\nThis is a **common-source amplifier with a diode-connected PMOS active load**.\n\n---\n\n## 1. DC Analysis (Transfer Characteristic $V_{out}$ vs. $V_{in}$)\n\nSet $I_{D1} = I_{D2}$ (KCL at $V_{out}$).\n\n### Transistor equations (ignoring $\\lambda$ first)\n**M₁ (NMOS):**\n- Cutoff: $V_{in} < V_{thn} \\Rightarrow I_{D1}=0$\n- Triode: $V_{DS1}<V_{GS1}-V_{thn} \\Rightarrow I_{D1}=k_n\\left[(V_{in}-V_{thn})V_{out}-\\frac{V_{out}^2}{2}\\right]$\n- Saturation: $V_{DS1}\\ge V_{GS1}-V_{thn} \\Rightarrow I_{D1}=\\frac{1}{2}k_n(V_{in}-V_{thn})^2$\n\nwhere $k_n=\\mu_n C_{ox}(W_1/L_1)$.\n\n**M₂ (PMOS, always saturated because $V_{SD2}=V_{SG2}$):**\n$$I_{D2}=\\frac{1}{2}k_p(V_{DD}-V_{out}-|V_{thp}|)^2$$\nwhere $k_p=\\mu_p C_{ox}(W_2/L_2)$ and $V_{SG2}=V_{DD}-V_{out}$.\n\n### Regions of operation\n\n| Region | Condition on $V_{in}$ | $V_{out}$ expression |\n|--------|----------------------|----------------------|\n| **I** (M₁ cutoff) | $V_{in}\\le V_{thn}$ | $V_{out}=V_{DD}-|V_{thp}|$ (since $I_{D2}=0$) |\n| **II** (M₁ triode) | $V_{thn}<V_{in}<V_{in,sat}$ | Solve quadratic: $(1+k)V_{out}^2-2[(V_{DD}-|V_{thp}|)+k(V_{in}-V_{thn})]V_{out}+(V_{DD}-|V_{thp}|)^2=0$ with $k=k_n/k_p$ |\n| **III** (M₁ sat.) | $V_{in}\\ge V_{in,sat}$ | $$V_{out}=V_{DD}-|V_{thp}|-\\sqrt{\\frac{k_n}{k_p}}(V_{in}-V_{thn})$$ |\n\nThe boundary $V_{in,sat}$ is found by setting $V_{out}=V_{in}-V_{thn}$ in Region III:\n$$V_{in,sat}=V_{thn}+\\frac{V_{DD}-|V_{thp}|}{1+\\sqrt{k_n/k_p}}$$\n\n---\n\n## 2. Small-Signal AC Analysis\n\nAt the bias point (both in saturation, $\\lambda_1=\\lambda_2=0$ for simplicity):\n\n- $g_{m1}=k_n(V_{GS1}-V_{thn})=\\sqrt{2k_n I_D}$\n- $g_{m2}=k_p(V_{SG2}-|V_{thp}|)=\\sqrt{2k_p I_D}$\n- $r_{o1}=1/(\\lambda_1 I_D)$, $r_{o2}=1/(\\lambda_2 I_D)$\n- Body effect is absent ($V_{SB1}=V_{SB2}=0$)\n\n### Small-signal equivalent\n- $M_1$ contributes $g_{m1}v_{gs1}=g_{m1}v_{in}$ and $r_{o1}$ from drain to source.\n- $M_2$ is diode-connected (gate = drain = $v_{out}$, source AC ground). Its impedance is $1/g_{m2}\\parallel r_{o2}$.\n\nApplying KCL at $V_{out}$:\n$$g_{m1}v_{in}+v_{out}\\left(g_{m2}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)=0$$\n\n### Voltage gain\n$$A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}$$\n\nWith $\\lambda=0$ ($r_o\\to\\infty$):\n$$\\boxed{A_v=-\\frac{g_{m1}}{g_{m2}}=-\\sqrt{\\frac{k_n}{k_p}}=-\\sqrt{\\frac{\\mu_n(W_1/L_1)}{\\mu_p(W_2/L_2)}}}$$\n\nIf $\\lambda\\neq 0$:\n$$\\boxed{A_v=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}}$$\n\n### Input and Output Resistance\n- **Input resistance:** $R_{in}=\\infty$ (MOSFET gate draws no DC/AC current)\n- **Output resistance:** Looking into $V_{out}$ with $v_{in}=0$:\n  $$\\boxed{R_{out}=r_{o1}\\parallel r_{o2}\\parallel\\frac{1}{g_{m2}}=\\frac{1}{g_{m2}+g_{ds1}+g_{ds2}}}$$\n\nIf $\\lambda=0$: $\\boxed{R_{out}\\approx 1/g_{m2}}$\n\n---\n\n## 3. Summary / Key Features\n\n| Parameter | Expression / Value |\n|-----------|-------------------|\n| **Circuit type** | Common-source amp with PMOS diode load |\n| **DC bias** | $I_{D1}=I_{D2}$; $M_2$ always saturated |\n| **Gain (sat., $\\lambda=0$)** | $A_v=-\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}$ (typically $\\sim -1.5$ to $-3$) |\n| **Gain (with $\\lambda$)** | $A_v=-g_{m1}/(g_{m2}+g_{ds1}+g_{ds2})$ |\n| **$R_{in}$** | $\\infty$ |\n| **$R_{out}$** | $\\approx 1/g_{m2}$ (low, $\\sim$ few k$\\Omega$) |\n\nThe circuit acts as a **low-gain voltage amplifier** (or level shifter). Because $M_2$ is diode-connected, it provides a well-defined bias current and sets the output impedance low, but the voltage gain is limited to $\\sqrt{k_n/k_p}$ (much smaller than a resistive-loaded CS stage).",
        "format": "markdown",
        "sha256": "f98884cb4c46bacbb2d15001af42ee7817df57337408f2eec0c2f4cfb3b3c1de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including channel-length modulation for both devices. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 15140,
        "total_tokens": 16650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 15140,
        "total_tokens": 16650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13546,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **CMOS inverter** (the basic building block of digital CMOS logic).\n\n| Transistor | Type | Source | Drain | Gate | Body (substrate) |\n|------------|------|--------|-------|------|-------------------|\n| **M₁** | NMOS (enhancement) | Ground | Vₒᵤₜ | Vᵢₙ | Ground (left ground symbol) |\n| **M₂** | PMOS (enhancement) | V_DD | Vₒᵤₜ | Vᵢₙ | V_DD (through the source connection) |\n\n*Notes on the drawing:*  \n- The right‑hand ground symbol is the **source** of M₁.  \n- The left‑hand ground symbol is the **body (p‑substrate)** connection of M₁.  \n- Both gates are driven by the same input **Vᵢₙ** (the wire splits on the left side of the figure).  \n- The drains of M₁ and M₂ are tied together at the output node **Vₒᵤₜ**.\n\n---\n\n## 1. DC Analysis – Voltage Transfer Characteristic (VTC)\n\nUsing the long‑channel square‑law model (ignoring channel‑length modulation, λ≈0):\n\n**NMOS (M₁):**\n\\[\nI_{Dn}= \n\\begin{cases}\n0 & V_{in}<V_{thn} \\\\[4pt]\nk_n\\!\\left[(V_{in}-V_{thn})V_{out}-\\frac{V_{out}^2}{2}\\right] & V_{out}<V_{in}-V_{thn} \\\\[6pt]\n\\frac{1}{2}k_n(V_{in}-V_{thn})^2 & V_{out}\\ge V_{in}-V_{thn}\n\\end{cases}\n\\]\n\n**PMOS (M₂):**  (with \\(V_{SG}=V_{DD}-V_{in}\\) and \\(V_{SD}=V_{DD}-V_{out}\\))\n\\[\nI_{Dp}= \n\\begin{cases}\n0 & V_{in}>V_{DD}-|V_{thp}| \\\\[4pt]\nk_p\\!\\left[(V_{DD}-V_{in}-|V_{thp}|)(V_{DD}-V_{out})-\\frac{(V_{DD}-V_{out})^2}{2}\\right] & V_{out}>V_{in}+|V_{thp}| \\\\[6pt]\n\\frac{1}{2}k_p(V_{DD}-V_{in}-|V_{thp}|)^2 & V_{out}\\le V_{in}+|V_{thp}|\n\\end{cases}\n\\]\n\nBecause there is no DC path to ground other than through the transistors, **I_Dn = I_Dp = I_D**.\n\n### Operating Regions\n\n| Region | Condition on Vᵢₙ | M₁ | M₂ | Vₒᵤₜ |\n|--------|------------------|----|----|------|\n| **I** (Pull‑up) | \\(V_{in}<V_{thn}\\) | Cut‑off | Linear (I≈0) | **≈ V_DD** |\n| **II** (Transition) | \\(V_{thn}<V_{in}<V_{DD}-|V_{thp}|\\) | On | On | **Steep fall** |\n| **III** (Pull‑down) | \\(V_{in}>V_{DD}-|V_{thp}|\\) | Linear (I≈0) | Cut‑off | **≈ 0** |\n\nIn Region II the two currents are equal; solving \\(I_{Dn}=I_{Dp}\\) gives the explicit VTC curve. The point where both devices are in saturation (\\(V_{out}=V_{in}=V_M\\)) is the **inverter threshold** (switching point):\n\n\\[\n\\boxed{V_M=\\frac{V_{thn}+r\\,(V_{DD}-|V_{thp}|)}{1+r}},\\qquad \nr=\\sqrt{\\frac{k_p}{k_n}}=\\sqrt{\\frac{\\mu_p(W/L)_p}{\\mu_n(W/L)_n}}\n\\]\n\nIf the inverter is symmetric (\\(k_n=k_p\\) and \\(|V_{thp}|=V_{thn}=V_{th}\\)), then \\(V_M\\approx V_{DD}/2\\).\n\n---\n\n## 2. Key Digital Parameters\n\nWith λ=0 the extreme output levels are:\n- \\(V_{OH}=V_{DD}\\)\n- \\(V_{OL}=0\\)\n\nThe input levels \\(V_{IL}\\) and \\(V_{IH}\\) are defined where the small‑signal gain \\(|A_v|=1\\). Solving \\(\\frac{dV_{out}}{dV_{in}}=-1\\) in Regions IIa and IIb yields:\n\n\\[\nV_{IL}= \\frac{2V_{out1}-V_{thn}+V_{DD}+|V_{thp}|\\sqrt{k_p/k_n}}{1+\\sqrt{k_p/k_n}} \\quad (\\text{approx.})\n\\]\n\n\\[\nV_{IH}= \\frac{V_{thn}+V_{DD}-|V_{thp}|\\sqrt{k_p/k_n}+V_{out2}\\sqrt{k_p/k_n}}{1+\\sqrt{k_p/k_n}}\n\\]\n\nThe **noise margins** are:\n\\[\nNM_H = V_{OH}-V_{IH}\\approx V_{DD}-V_{IH}\n\\]\n\\[\nNM_L = V_{IL}-V_{OL}\\approx V_{IL}\n\\]\n\nFor a well‑designed symmetric inverter (\\(k_n=k_p\\), \\(V_{thn}=|V_{thp}|=V_{th}\\)):\n\\[\nNM_H \\approx NM_L \\approx \\frac{V_{DD}}{2}-V_{th}\n\\]\n\n---\n\n## 3. Small‑Signal (AC) Analysis\n\nBias the inverter at the transition point \\(Q\\) (\\(V_{in}=V_{out}=V_M\\)). Both transistors are in saturation.\n\nThe small‑signal equivalent gives:\n- Transconductances:  \n  \\(g_{m1}=k_n(V_M-V_{thn})\\)  \n  \\(g_{m2}=k_p(V_{DD}-V_M-|V_{thp}|)\\)\n\n- Output resistances:  \n  \\(r_{o1}=\\frac{1}{\\lambda_n I_{DQ}}\\), \\(r_{o2}=\\frac{1}{\\lambda_p I_{DQ}}\\)\n\nThe voltage gain is:\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})}\n\\]\n\nAt the switching point (\\(\\lambda=0\\)) the gain is **infinite** (vertical transition). With finite λ, \\(|A_v|\\) is typically in the range **10–50** for long‑channel devices and can be >100 for short‑channel devices with high \\(g_m\\).\n\nThe input impedance is essentially infinite (capacitive only, \\(C_{gs1}+C_{gs2}\\)), and the output impedance is:\n\\[\nR_{out}=r_{o1}\\parallel r_{o2}\n\\]\n\n---\n\n## 4. Summary of Operation\n\n- **Vᵢₙ ≈ 0 (Low):** M₂ is strongly on, M₁ is off → **Vₒᵤₜ ≈ V_DD** (Logic **1**).\n- **Vᵢₙ ≈ V_DD (High):** M₂ is off, M₁ is strongly on → **Vₒᵤₜ ≈ 0** (Logic **0**).\n- **Intermediate Vᵢₙ:** Both devices conduct; the inverter operates in the high‑gain transition region, providing sharp switching and noise rejection.\n\nThus the circuit functions as a **logic inverter / NOT gate** with rail‑to‑rail output swing, very high input impedance, and low static power dissipation (current flows only during the brief transition, except for leakage).",
        "format": "markdown",
        "sha256": "6a45d6172a31b41e77c3b5388862fbe32c616eea89cc762cf6dc63e2e39ea279"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter. Both devices are PMOS; M2 is the common-source input device and M1 is a diode-connected PMOS load, so the inverter analysis does not apply.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 22517,
        "total_tokens": 24674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 22517,
        "total_tokens": 24674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20721,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a two‑transistor stage with supply $V_{DD}$ and ground:\n\n* **$M_2$** – gate driven by $V_{\\mathrm{in}}$, one terminal at $V_{DD}$, the other at the output node $V_{\\mathrm{out}}$.  \n  The symbol has a broken channel line $\\Rightarrow$ **enhancement‑mode NMOS** ($V_{th2}>0$).  \n  Because its source is at the lower potential ($V_{\\mathrm{out}}$) and its drain is at $V_{DD}$, $M_2$ is connected as a **common‑drain (source‑follower)** device.\n\n* **$M_1$** – one terminal at $V_{\\mathrm{out}}$, the other at ground. Its gate is tied to ground ($V_{GS1}=0$).  \n  The symbol shows a continuous (solid) channel line $\\Rightarrow$ **depletion‑mode NMOS** ($V_{th1}<0$).  \n  With $V_{GS1}=0>V_{th1}$ it is always on and acts as an **active current‑source load** $I_{SS}$.\n\nThus the circuit is a **source follower (common‑drain amplifier) with a depletion‑mode NMOS load**.\n\n---\n\n## 1. DC Analysis (Transfer Characteristic $V_{\\mathrm{out}}$ vs. $V_{\\mathrm{in}}$)\n\nUse the square‑law model (ignoring $\\lambda$ for the basic shape):\n\n$$I_D = \\frac{1}{2}K(V_{GS}-V_{th})^2 \\quad\\text{(saturation)}$$\n\n### Transistor $M_1$ (load)\n$$V_{GS1}=0,\\qquad V_{DS1}=V_{\\mathrm{out}},\\qquad V_{th1}=-|V_{th1}|$$\n\n*If $V_{\\mathrm{out}}>|V_{th1}|$ (saturation):*\n$$I_{D1}\\approx \\frac{1}{2}K_1|V_{th1}|^2 \\equiv I_{SS}$$\n\n*If $V_{\\mathrm{out}}<|V_{th1}|$ (triode):* $I_{D1}\\approx K_1|V_{th1}|V_{\\mathrm{out}}$.\n\n### Transistor $M_2$ (driver)\n$$V_{GS2}=V_{\\mathrm{in}}-V_{\\mathrm{out}},\\qquad V_{DS2}=V_{DD}-V_{\\mathrm{out}},\\qquad V_{th2}>0$$\n\nSaturation condition: $V_{DS2}>V_{GS2}-V_{th2}\\;\\Rightarrow\\;V_{\\mathrm{in}}<V_{DD}+V_{th2}$.\n\nIn saturation:\n$$I_{D2}=\\frac{1}{2}K_2\\bigl(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_{th2}\\bigr)^2$$\n\n### KCL at $V_{\\mathrm{out}}$: $I_{D2}=I_{D1}$\n\n**Region A – $M_2$ cut‑off** $\\bigl(V_{\\mathrm{in}}<V_{th2}+V_{OV}\\bigr)$  \nHere $I_{D2}=0\\Rightarrow I_{D1}=0\\Rightarrow V_{\\mathrm{out}}\\approx 0$.\n\n**Region B – Both in saturation** $\\bigl(V_{\\mathrm{in}}>V_{th2}+V_{OV}\\bigr)$  \nSet $I_{D2}=I_{SS}$:\n$$\\frac{1}{2}K_2\\bigl(V_{\\mathrm{in}}-V_{\\mathrm{out}}-V_{th2}\\bigr)^2 \\approx \\frac{1}{2}K_1|V_{th1}|^2$$\n\nSolving for $V_{\\mathrm{out}}$:\n$$\\boxed{V_{\\mathrm{out}}\\approx V_{\\mathrm{in}}-V_{th2}-V_{OV}}$$\nwhere the overdrive voltage is constant:\n$$V_{OV}=\\sqrt{\\frac{K_1}{K_2}}\\,|V_{th1}|=\\sqrt{\\frac{2I_{SS}}{K_2}}$$\n\n**Region C – $M_2$ in triode** $\\bigl(V_{\\mathrm{in}}>V_{DD}+V_{th2}\\bigr)$  \nThen $V_{DS2}<V_{GS2}-V_{th2}$ and $V_{\\mathrm{out}}$ is pulled up close to $V_{DD}$.\n\n### DC Transfer Curve Summary\n$$V_{\\mathrm{out}}(V_{\\mathrm{in}})\\approx\n\\begin{cases}\n0, & V_{\\mathrm{in}}<V_{th2}+V_{OV}\\\\[4pt]\nV_{\\mathrm{in}}-\\bigl(V_{th2}+V_{OV}\\bigr), & V_{th2}+V_{OV}<V_{\\mathrm{in}}<V_{DD}+V_{th2}\\\\[4pt]\n\\approx V_{DD}, & V_{\\mathrm{in}}\\gg V_{DD}+V_{th2}\n\\end{cases}$$\n\nThe stage shifts the input level downward by $\\approx V_{th2}+V_{OV}$ and reproduces it with **unity slope**—the hallmark of a source follower.\n\n---\n\n## 2. Small‑Signal Analysis\n\nReplace the transistors by their small‑signal models (AC ground at $V_{DD}$ and ground).\n\n* **$M_2$:** Transconductance $g_{m2}$, output resistance $r_{o2}=1/(\\lambda_2 I_{D})$.  \n  Source is at $v_{\\mathrm{out}}$, gate at $v_{\\mathrm{in}}$, drain at AC ground.  \n  If the body (substrate) of $M_2$ is grounded, include the body‑effect source $g_{mb2}v_{bs2}=g_{mb2}(0-v_{\\mathrm{out}})=-g_{mb2}v_{\\mathrm{out}}$.\n\n* **$M_1$:** Gate and source are both AC ground $\\Rightarrow v_{gs1}=0$.  \n  Only its output resistance $r_{o1}=1/(\\lambda_1 I_{D})$ appears between $V_{\\mathrm{out}}$ and ground.\n\n### Equivalent Circuit at $V_{\\mathrm{out}}$\nThe current entering the node from $M_2$ is\n$$i_{M2}=g_{m2}(v_{\\mathrm{in}}-v_{\\mathrm{out}})+g_{mb2}(-v_{\\mathrm{out}})$$\n(if body effect is present).\n\nKCL at $v_{\\mathrm{out}}$:\n$$g_{m2}(v_{\\mathrm{in}}-v_{\\mathrm{out}})-g_{mb2}v_{\\mathrm{out}} = v_{\\mathrm{out}}\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)$$\n\nSolving for the voltage gain $A_v=v_{\\mathrm{out}}/v_{\\mathrm{in}}$:\n\n$$\\boxed{A_v=\\frac{g_{m2}}{g_{m2}+g_{mb2}+g_{ds1}+g_{ds2}}}$$\n\nwhere $g_{ds}=1/r_o$.\n\n### Typical Values\nIf channel‑length modulation is negligible ($r_{o1},r_{o2}\\to\\infty$) and the body is tied to the source ($g_{mb2}=0$):\n$$\\boxed{A_v\\approx 1}$$\n\nWith substrate body effect ($g_{mb2}\\approx 0.2\\,g_{m2}$):\n$$A_v\\approx \\frac{1}{1+\\eta}\\approx 0.75\\!-\\!0.85$$\n\n### Input and Output Impedance\n* **Input resistance:** $R_{\\mathrm{in}}=\\infty$ (gate oxide isolation).\n* **Output resistance:** From the KCL expression with $v_{\\mathrm{in}}=0$:\n  $$\\boxed{R_{\\mathrm{out}}=\\frac{1}{g_{m2}+g_{mb2}+g_{ds1}+g_{ds2}}\\approx \\frac{1}{g_{m2}}}$$\n  Typically a few hundred $\\Omega$ to a few k$\\Omega$.\n\n---\n\n## 3. Key Features & Conclusion\n\n| Parameter | Value / Behavior |\n|-----------|------------------|\n| **Function** | Voltage buffer (level shifter) |\n| **DC shift** | $V_{\\mathrm{out}}\\approx V_{\\mathrm{in}}-(V_{th2}+V_{OV})$ |\n| **Voltage gain** | $\\approx 1$ (slightly $<1$ with body effect) |\n| **Input impedance** | Very high ($R_{\\mathrm{in}}\\to\\infty$) |\n| **Output impedance** | Low ($R_{\\mathrm{out}}\\approx 1/g_{m2}$) |\n| **Current bias** | Set by depletion load: $I_D\\approx \\frac{1}{2}K_1|V_{th1}|^2$ |\n\nThe circuit therefore reproduces the input signal at the output with nearly the same amplitude, shifted downward by one threshold voltage plus the overdrive of $M_2$, while providing impedance transformation—exactly the behavior of a **MOS source follower with an active depletion load**.",
        "format": "markdown",
        "sha256": "836966b0da6a2462a1847c0d505cd02f7ee0f073279b800673502b4379b0b5a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both devices as NMOS and the stage as a source follower with a depletion-load current source. The circuit is a PMOS common-source stage with a diode-connected PMOS load, so its topology and gain analysis are fundamentally wrong.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 19006,
        "total_tokens": 21163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 19006,
        "total_tokens": 21163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16925,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a two-transistor circuit with one input ($V_{\\mathrm{in}}$), one output ($V_{\\mathrm{out}}$), and a supply $V_{DD}$.\n\n*   **$M_2$** is a **PMOS** transistor: source → $V_{DD}$, drain → $V_{\\mathrm{out}}$, gate → $V_{\\mathrm{in}}$ (body/substrate is tied to $V_{DD}$).\n*   **$M_1$** is an **NMOS** transistor: drain → $V_{\\mathrm{out}}$, source → ground, gate → $V_{\\mathrm{in}}$ (body/substrate is tied to ground, shown by the second ground symbol).\n\nBecause the gates of both transistors are driven by the same input and their drains are tied together at the output node, this is the classic **CMOS inverter** (NOT gate).\n\n---\n\n## 1. DC Analysis – Voltage Transfer Characteristic (VTC)\n\nWe use the square-law MOSFET model (neglecting channel-length modulation $\\lambda \\approx 0$ for the qualitative curve):\n\n$$I_{Dn} = \\frac{1}{2}\\beta_n\\bigl(V_{\\mathrm{in}}-V_{thn}\\bigr)^2 \\quad (\\text{saturation})$$\n$$I_{Dp} = \\frac{1}{2}\\beta_p\\bigl(V_{DD}-V_{\\mathrm{in}}-|V_{thp}|\\bigr)^2 \\quad (\\text{saturation})$$\n\nwhere $\\beta = \\mu C_{ox}(W/L)$.\n\nSince $M_1$ and $M_2$ are in series, $I_{D1}=I_{D2}=I_D$. The output voltage is determined by which devices are on.\n\n### Region I: $V_{\\mathrm{in}} < V_{thn}$  (Low input)\n*   $M_1$ is **cut off** ($V_{GS1}<V_{thn}$) $\\Rightarrow I_D \\approx 0$.\n*   $M_2$ is **on** ($V_{SG2}=V_{DD}-V_{\\mathrm{in}} > |V_{thp}|$).\n\nWith no current through $M_2$, $V_{SD2}=0 \\Rightarrow$ **$V_{\\mathrm{out}} \\approx V_{DD}$**.  \n($M_2$ operates in the linear/triode region.)\n\n### Region II: $V_{thn} < V_{\\mathrm{in}} < V_{DD}-|V_{thp}|$  (Transition region)\nBoth transistors are **on** and in **saturation** (for typical $V_{\\mathrm{out}}$ values).\n\nSet $I_{Dn}=I_{Dp}$:\n\n$$\\beta_n\\bigl(V_{\\mathrm{in}}-V_{thn}\\bigr)^2 = \\beta_p\\bigl(V_{DD}-V_{\\mathrm{in}}-|V_{thp}|\\bigr)^2$$\n\nSolving gives the inverter switching threshold $V_M$ (the point where $V_{\\mathrm{in}}=V_{\\mathrm{out}}=V_M$):\n\n$$\\boxed{V_M = \\frac{V_{DD}-|V_{thp}|+\\sqrt{\\beta_n/\\beta_p}\\,V_{thn}}{1+\\sqrt{\\beta_n/\\beta_p}}}$$\n\nIn this region $V_{\\mathrm{out}}$ falls sharply from $V_{DD}$ toward 0.\n\n### Region III: $V_{\\mathrm{in}} > V_{DD}-|V_{thp}|$  (High input)\n*   $M_2$ is **cut off** ($V_{SG2}<|V_{thp}|$) $\\Rightarrow I_D \\approx 0$.\n*   $M_1$ is **strongly on** ($V_{GS1}>V_{thn}$).\n\nWith $M_2$ open, $M_1$ pulls the output node to ground: **$V_{\\mathrm{out}} \\approx 0$**.  \n($M_1$ is in the linear region because $V_{DS1}\\approx 0 < V_{GS1}-V_{thn}$.)\n\n---\n\n## 2. Small-Signal (AC) Analysis\n\nAt the switching point $V_{\\mathrm{in}}=V_{\\mathrm{out}}=V_M$, both devices are in saturation.\n\n*   Transconductances:\n    $$g_{m1} = \\beta_n(V_M-V_{thn}), \\qquad g_{m2} = \\beta_p\\bigl(V_{DD}-V_M-|V_{thp}|\\bigr)$$\n\n*   Output resistances:\n    $$r_{o1} = \\frac{1}{\\lambda_n I_D}, \\qquad r_{o2} = \\frac{1}{\\lambda_p I_D}$$\n\nThe small-signal voltage gain is\n\n$$\\boxed{A_v = \\frac{dV_{\\mathrm{out}}}{dV_{\\mathrm{in}}}\\Big|_{V_M} = -\\frac{g_{m1}+g_{m2}}{g_{ds1}+g_{ds2}} = -(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})}$$\n\nIf $\\lambda \\to 0$ (long-channel devices), $|A_v|\\to \\infty$; for short-channel devices $|A_v|$ is large (typically $-10$ to $-50$), giving the inverter its sharp transition.\n\n*   **Input impedance:** $R_{\\mathrm{in}} \\approx \\infty$ (gate oxide is insulating).\n*   **Output impedance:** $R_{\\mathrm{out}} \\approx r_{o1}\\parallel r_{o2}$ (low, especially near the rails).\n\n---\n\n## 3. Logic Function & Noise Margins\n\nThe circuit implements the **NOT** (inversion) function:\n\n| $V_{\\mathrm{in}}$ | $M_1$ | $M_2$ | $V_{\\mathrm{out}}$ |\n|:---:|:---:|:---:|:---:|\n| Low ($\\approx 0$) | OFF | ON | **High** ($\\approx V_{DD}$) |\n| High ($\\approx V_{DD}$) | ON | OFF | **Low** ($\\approx 0$) |\n\nThe noise margins are defined by the points where $|dV_{\\mathrm{out}}/dV_{\\mathrm{in}}|=1$:\n*   $V_{IL}$ (max low input recognized as low)\n*   $V_{IH}$ (min high input recognized as high)\n\n$$NM_L = V_{IL}-0, \\qquad NM_H = V_{DD}-V_{IH}$$\n\nFor a symmetric inverter ($\\beta_n=\\beta_p$ and $V_{thn}=|V_{thp}|=V_{th}$), $V_M \\approx V_{DD}/2$ and the noise margins are maximized and approximately equal.\n\n---\n\n## Summary\n\nThe circuit is a **CMOS inverter**. It provides:\n1. **Logic inversion** with full rail-to-rail swing ($0 \\to V_{DD}$).\n2. **Negligible static power dissipation** (no direct DC path from $V_{DD}$ to ground in either steady state).\n3. **High voltage gain** near the switching threshold $V_M$, making it suitable for both digital logic and analog amplification (e.g., as the first stage of an op-amp).",
        "format": "markdown",
        "sha256": "c1f97f3368daf2f887941bf8d86e729fd55092d5878fa2c8d3e49b73a47e6608"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a CMOS inverter: M1 is a PMOS with gate and lower terminal tied to ground, forming a diode-connected PMOS load, not an input-driven NMOS. The resulting VTC and small-signal analysis do not apply.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 15884,
        "total_tokens": 18041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 15884,
        "total_tokens": 18041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the stack, **M₁** (bottom) and **M₂** (top) are both NMOS devices with their gates tied to AC ground (Vb1, Vb2 are DC biases) and VDD is AC ground.  \nThe port is at the source of M₁ (the bottom node). Apply a small‑signal test voltage **v** there and find the current **i** entering; then Rout = v/i.\n\n### Small‑signal model\n- M₁: gate ground, source at v, drain at vₓ  \n  vgs1 = –v, vds1 = vₓ – v, ro1 between drain and source\n- M₂: gate ground, source at vₓ, drain at ground (VDD)  \n  vgs2 = –vₓ, vds2 = –vₓ, ro2 between drain and source\n\nWrite KCL at the two nodes (ignoring body effect for simplicity; include gmb if the bodies are grounded):\n\n**At the bottom node (source of M₁):**\n\\[\ni = (g_{m1}+1/r_{o1})v - \\frac{v_x}{r_{o1}}\n\\]\n\n**At node X (drain of M₁ / source of M₂):**\n\\[\n-\\!g_{m1}v+\\frac{v_x-v}{r_{o1}} + \\left(g_{m2}+\\frac{1}{r_{o2}}\\right)v_x =0\n\\]\n\nSolving for vₓ:\n\\[\nv_x = v\\,\\frac{g_{m1}+1/r_{o1}}{g_{m2}+1/r_{o1}+1/r_{o2}}\n\\]\n\nSubstitute vₓ into the expression for i:\n\\[\n\\frac{i}{v}= \\frac{(g_{m1}+1/r_{o1})(g_{m2}+1/r_{o2})}\n{g_{m2}+1/r_{o1}+1/r_{o2}}\n\\]\n\nHence\n\n\\[\n\\boxed{R_{out}= \\frac{v}{i}\n= \\frac{g_{m2}+1/r_{o1}+1/r_{o2}}\n{(g_{m1}+1/r_{o1})(g_{m2}+1/r_{o2})}}\n\\]\n\nMultiplying numerator and denominator by rₒ₁rₒ₂ gives the symmetric form\n\n\\[\n\\boxed{R_{out}= \\frac{r_{o1}+r_{o2}+g_{m2}\\,r_{o1}r_{o2}}\n{(1+g_{m1}r_{o1})(1+g_{m2}r_{o2})}}\n\\]\n\n### Approximation\nFor typical values where gₘrₒ ≫ 1:\n\n\\[\n\\boxed{R_{out}\\;\\approx\\;\\frac{1}{g_{m1}}}\n\\]\n\n(If body effect is present, replace gₘ₁ → gₘ₁+gₘb₁ and gₘ₂ → gₘ₂+gₘb₂ in the exact formula.)",
        "format": "markdown",
        "sha256": "00788e956c389b1364acc02cedb23a972f3a3e44bb070348567a7834b46f5022"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer analyzes the PMOS stack as NMOS, puts the output port at the wrong node, and uses gm2 rather than M1's gm as the cascode factor, so its result does not apply to the figure.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 36778,
        "total_tokens": 38829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 36778,
        "total_tokens": 38829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer (small‑signal output resistance looking into the source of M₁)**  \n\nThe circuit is a source‑follower (M₁) whose drain is loaded by the impedance of M₂.  \nApply a test voltage \\(V\\) at the bottom node (source of M₁) with all DC supplies and bias voltages (\\(V_{DD},V_{b1},V_{b2}\\)) at AC ground.\n\n---\n\n### 1.  Small‑signal model\n\n| Transistor | Type | Key parameters |\n|------------|------|----------------|\n| **M₁** | NMOS (source at the output, body = ground) | \\(g_{m1},\\; g_{mb1},\\; r_{o1}\\) |\n| **M₂** | PMOS (source at \\(V_{DD}\\), body = \\(V_{DD}\\)) | \\(g_{m2}=0\\) (AC), \\(g_{mb2}=0\\), \\(r_{o2}\\) |\n\nBecause M₂’s source and gate are both AC ground, its transconductance does not contribute; it behaves only as its output resistance \\(r_{o2}\\) between node \\(X\\) and ground.\n\nFor M₁:\n\\[\nV_{GS1}= -V,\\qquad V_{BS1}= -V\n\\]\n\n---\n\n### 2.  KCL at node \\(X\\) (drain of M₁)\n\nThe current leaving \\(X\\) into M₁ (drain) is\n\\[\nI_{D1}= -(g_{m1}+g_{mb1})V+\\frac{V_X-V}{r_{o1}}\n\\]\n\nThe current leaving \\(X\\) into M₂ is\n\\[\nI_{D2}= \\frac{V_X}{r_{o2}}\n\\]\n\nSet \\(I_{D1}+I_{D2}=0\\):\n\\[\n-(g_{m1}+g_{mb1})V+\\frac{V_X-V}{r_{o1}}+\\frac{V_X}{r_{o2}}=0\n\\]\n\nSolving for \\(V_X\\):\n\\[\nV_X = \\frac{\\bigl(g_{m1}+g_{mb1}+1/r_{o1}\\bigr)V}{1/r_{o1}+1/r_{o2}}\n\\equiv \\frac{A\\,V}{C}\n\\]\nwhere \\(A=g_{m1}+g_{mb1}+1/r_{o1}\\) and \\(C=1/r_{o1}+1/r_{o2}\\).\n\n---\n\n### 3.  KCL at the source (output node)\n\nThe current entering the source from the test source is\n\\[\nI = (g_{m1}+g_{mb1})V+\\frac{V-V_X}{r_{o1}}\n= A\\,V-\\frac{V_X}{r_{o1}}\n\\]\n\nSubstitute \\(V_X\\):\n\\[\nI = A\\,V\\left[1-\\frac{1}{r_{o1}C}\\right]\n= A\\,V\\frac{r_{o1}}{r_{o1}+r_{o2}}\n\\]\n\n---\n\n### 4.  Output resistance \\(R_{out}=V/I\\)\n\n\\[\n\\boxed{%\nR_{out}= \\frac{r_{o1}+r_{o2}}{1+(g_{m1}+g_{mb1})r_{o1}}\n}\n\\]\n\n---\n\n### 5.  Common approximations\n\nIf \\((g_{m1}+g_{mb1})r_{o1}\\gg 1\\) (the usual case):\n\n\\[\n\\boxed{%\nR_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}}\\left(1+\\frac{r_{o2}}{r_{o1}}\\right)\n\\;\\approx\\; \\frac{1}{g_{m1}}\\left(1+\\frac{r_{o2}}{r_{o1}}\\right)\n}\n\\]\n\nSpecial cases:\n- **Drain AC‑grounded** (\\(r_{o2}\\to 0\\)): \\(R_{out}\\approx 1/g_{m1}\\) (ordinary source follower).\n- **Drain open** (\\(r_{o2}\\to\\infty\\)): \\(R_{out}\\to\\infty\\).\n\n---\n\n**So the exact result is**  \n\\[\n\\boxed{R_{out}= \\dfrac{r_{o1}+r_{o2}}{1+(g_{m1}+g_{mb1})r_{o1}}}\n\\]  \nand for typical values where \\(g_m r_o\\gg 1\\), \\(R_{out}\\approx \\dfrac{1}{g_{m1}}\\Bigl(1+\\dfrac{r_{o2}}{r_{o1}}\\Bigr)\\).",
        "format": "markdown",
        "sha256": "874d5fbb845eb2073fc400d6efb83bb55a64db00e65924d20bd40aa404f34333"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology: both devices are PMOS, and M1 is the common-gate cascode with its drain at the output. Its source-follower model and resulting Rout formula do not match the circuit.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 35440,
        "total_tokens": 37491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 35440,
        "total_tokens": 37491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, the two transistors are stacked between the AC-ground supply \\(V_{DD}\\) and the output node (the bottom terminal of \\(M_1\\)).  \nWith the DC biases \\(V_{b1},V_{b2}\\) and \\(V_{DD}\\) turned off for small-signal analysis, we apply a test voltage \\(V\\) at the output and find \\(I=V/R_{out}\\).\n\n**Small-signal model**\n\n- \\(M_2\\): source and gate are at AC ground, so only \\(r_{o2}\\) appears.  \n  The impedance looking up into node \\(X\\) is therefore \\(r_{o2}\\).\n\n- \\(M_1\\): gate is AC ground, its source is at node \\(X\\) (voltage \\(V_x\\)), and its drain is at the output (\\(V\\)).  \n  Its source is degenerated by the impedance \\(r_{o2}\\).\n\nWriting KCL at node \\(X\\) and at the output gives\n\n\\[\nV_x\\Bigl(g_{m1}+g_{mb1}+\\frac1{r_{o1}}+\\frac1{r_{o2}}\\Bigr)=\\frac{V}{r_{o1}}\n\\]\n\nand\n\n\\[\nI = \\frac{V}{r_{o1}} - V_x\\Bigl(g_{m1}+g_{mb1}+\\frac1{r_{o1}}\\Bigr).\n\\]\n\nSolving for \\(V_x\\) and substituting into \\(I\\) yields\n\n\\[\nR_{out}=\\frac{V}{I}=r_{o1}r_{o2}\\Bigl(g_{m1}+g_{mb1}+\\frac1{r_{o1}}+\\frac1{r_{o2}}\\Bigr).\n\\]\n\nFactoring gives the familiar cascode result (with \\(M_1\\) as the cascode device):\n\n\\[\n\\boxed{R_{out}=r_{o1}\\Bigl[1+(g_{m1}+g_{mb1})r_{o2}\\Bigr]+r_{o2}}\n\\]\n\nIf the body effect on \\(M_1\\) is negligible (\\(g_{mb1}\\approx 0\\)):\n\n\\[\n\\boxed{R_{out}\\approx r_{o1}\\bigl(1+g_{m1}r_{o2}\\bigr)+r_{o2}\n      = r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nSo the output resistance is boosted by the factor \\((1+g_{m1}r_{o2})\\) compared with \\(r_{o1}\\) alone.",
        "format": "markdown",
        "sha256": "0d2e8c69cbd681d69b6ef37b22dcac1af0512f63ed98e1ea04ff7190fdcc5dce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate cascode device and gives the expected output resistance, including the optional body-effect term.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 32188,
        "total_tokens": 34239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 32188,
        "total_tokens": 34239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the stack, **M₁ and M₂ are PMOS** (source at the higher potential: VDD for M₂, node X for M₁; the upward body-diode arrow at M₁’s bottom terminal confirms this).\n\nFor M₂ to be in saturation we need\n\n$$V_{SD2} \\ge V_{SG2}-|V_{thp}|$$\n\nWith $V_{S2}=V_{DD}$, $V_{D2}=V_X$ and $V_{G2}=V_{b2}$:\n\n$$V_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{thp}| \\;\\Longrightarrow\\; \\boxed{V_X \\le V_{b2}+|V_{thp}|}$$\n\nSo the DC bias must place node X low enough.\n\n---\n\n### How is this achieved in practice?\n\nM₁ is also in saturation, so it fixes $V_X$:\n\n$$V_{SG1}=V_X-V_{b1}=|V_{thp}|+V_{ov1}\\;\\Longrightarrow\\; V_X \\approx V_{b1}+|V_{thp}|+V_{ov1}$$\n\nSubstituting this into M₂’s condition:\n\n$$V_{b1}+|V_{thp}|+V_{ov1} \\le V_{b2}+|V_{thp}| \\;\\Longrightarrow\\; \\boxed{V_{b2} \\gtrsim V_{b1}+V_{ov1}}$$\n\nThus we **choose the gate bias $V_{b2}$ about one overdrive voltage ($V_{ov1}$) higher than $V_{b1}$** (numerically closer to ground for PMOS, or closer to VDD if you prefer the $V_{SG}$ view—what matters is $V_{SG2}\\approx |V_{thp}|+V_{ov2}$).\n\n---\n\n### Why it stays saturated during the $R_{out}$ analysis\n\nWhen we apply a small test voltage $v$ at the bottom to find $R_{out}$, the AC swing at node X is\n\n$$v_x \\approx \\frac{v}{g_{m1}r_{o1}} \\ll |V_{SD2}-V_{ov2}|$$\n\nbecause $g_{m1}r_{o1}\\gg 1$. Hence $V_{DS2}$ changes only by $\\sim v_x$, a negligible amount. So **if M₂ is saturated at DC, it remains saturated for the small-signal calculation**—justifying the use of $r_{o2}$ and $g_{m2}=0$ (since $v_{sg2}=0$) in the model.",
        "format": "markdown",
        "sha256": "7c69982842b8fa91ac1470d9161e24c3abfce93057d5bdbef074416597187f5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, relates VX to Vb1, and derives the equivalent bias requirement Vb2 ≥ Vb1 + Vov1 (for equal thresholds). The extra small-signal discussion and confusing directional aside do not change the correct essential result.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 24663,
        "total_tokens": 26774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 24663,
        "total_tokens": 26774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24075,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, **M₂ is a PMOS** transistor with its source at V_DD and drain at node X. For a PMOS device to be in saturation, two conditions must hold:\n\n1. **Turn-on:** V_SG₂ > |V_thp|  ⇒  V_b2 < V_DD – |V_thp|\n2. **Saturation:** V_SD₂ ≥ V_SG₂ – |V_thp|\n\nSubstituting the node voltages (V_S₂ = V_DD, V_D₂ = V_X, V_G₂ = V_b2):\n\nV_DD – V_X ≥ (V_DD – V_b2) – |V_thp|\n**⇒ V_X ≤ V_b2 + |V_thp|**  ← This is the key constraint for M₂.\n\n---\n\n### How V_X is set\nM₁ (also PMOS) sits below M₂. If M₁ is in saturation, its source-gate voltage is:\n\nV_SG₁ = |V_thp| + |V_ov1|\n\nSince V_S₁ = V_X and V_G₁ = V_b1:\n\nV_X = V_b1 + |V_GS₁| = V_b1 + |V_thp| + |V_ov1|\n\nwhere |V_ov1| = √(2I / (μ_pC_ox(W/L)₁)) is M₁’s overdrive voltage (set by the current I through R_out).\n\n---\n\n### The design condition\nInsert V_X into M₂’s saturation inequality:\n\nV_b1 + |V_thp| + |V_ov1| ≤ V_b2 + |V_thp|\n\n**⇒ V_b2 ≥ V_b1 + |V_ov1|**\n\nSo we ensure M₂ is saturated by **biasing V_b2 about one overdrive voltage (|V_ov1|) higher than V_b1**. In practice:\n\n- Choose V_b1 to set the current I (hence |V_ov1|)\n- Set **V_b2 ≈ V_b1 + |V_ov1|** (with |V_thp| < V_DD – V_b2 so M₂ is also turned on)\n\nThis keeps V_X low enough that V_SD₂ is large enough for saturation, which is exactly the bias scheme used in a **PMOS cascode (high-swing) current source**. If V_b2 were too close to V_b1, V_X would rise and push M₂ into the triode region.",
        "format": "markdown",
        "sha256": "a5c37b9fde1e49a0e701fac11c7c80d558fd9906942ae6f8626937a240427771"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, relates VX to Vb1, and derives the equivalent requirement Vb2 − Vb1 ≥ M1’s overdrive.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 11577,
        "total_tokens": 13688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11030,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 11577,
        "total_tokens": 13688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11030,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, **M₂ is a PMOS transistor** with:\n- Source at **V_DD**\n- Drain at node **X**\n- Gate biased at **V_b2**\n\n### Saturation condition for M₂\nFor a PMOS to be in saturation:\n$$V_{SD2} \\geq V_{SG2} - |V_{thp}|$$\n\nSubstituting the node voltages:\n- $V_{SD2} = V_{DD} - V_X$\n- $V_{SG2} = V_{DD} - V_{b2}$\n\nThis gives:\n$$V_{DD} - V_X \\geq (V_{DD} - V_{b2}) - |V_{th2}|$$\n\nwhich simplifies to the key requirement:\n$$\\boxed{V_X \\leq V_{b2} + |V_{th2}|}$$\n\n### How to guarantee it\nThe voltage at node X is set mainly by **M₁** (and the drop across R_out). If M₁ is in saturation:\n$$V_X \\approx V_{b1} + |V_{th1}| + |V_{ov1}|$$\n\nPlugging this into the M₂ condition:\n$$V_{b1} + |V_{th1}| + |V_{ov1}| \\leq V_{b2} + |V_{th2}|$$\n\nAssuming $|V_{th1}| \\approx |V_{th2}| = |V_{th}|$, this becomes:\n$$\\boxed{V_{b2} \\geq V_{b1} + |V_{ov1}|}$$\n\n### Bottom line\nWe ensure M₂ is saturated by **properly choosing the bias voltage V_b2**:\n- **V_b2 must be high enough** (closer to V_DD) relative to V_b1—specifically by at least the overdrive voltage of M₁.\n- This keeps $V_X$ well below $V_{b2}+|V_{th}|$, so that $V_{SD2} > V_{SG2}-|V_{th}|$.\n\nIn other words, M₂ acts as a **cascode device**; biasing its gate with $V_{b2} \\approx V_{b1}+|V_{ov1}|$ (or higher) fixes $V_X$ at a level that leaves M₂ comfortably in saturation regardless of the output voltage (as long as M₁ remains saturated).",
        "format": "markdown",
        "sha256": "e8e7716adc43b21f054610390bb0cb5ff884a17625ed18b4736540e0b1df48ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives M2’s PMOS saturation condition and relates X to M1’s gate bias, yielding the equivalent requirement Vb2 − Vb1 ≥ M1’s overdrive (for equal thresholds).",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 10188,
        "total_tokens": 12299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 10188,
        "total_tokens": 12299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **cascode amplifier** (common-source stage $M_1$ with cascode transistor $M_2$) biased by the ideal DC current source $I_1$ connected to $V_{DD}$.  \n- $M_1$: input transistor (gate $v_{in}$, source ground, drain at node $X$)  \n- $M_2$: cascode transistor (gate biased at $V_{b1}$, source at $X$, drain at $v_{out}$)  \n- $I_1$: supplies the bias current $I_{D1}=I_{D2}=I_1$; for AC it is an open circuit ($R\\to\\infty$).\n\nBecause $M_2$’s source is not at AC ground, **body effect** is present on $M_2$ if both devices share a common substrate (body of $M_2$ at ground).\n\n---\n\n## 1. DC Operating Point\n\nWith $I_{D1}=I_{D2}=I_1$ and ignoring channel-length modulation ($\\lambda=0$) for the bias calculation:\n\n**Transistor $M_1$**\n$$I_1=\\frac{1}{2}k_1\\bigl(V_{GS1}-V_{TH1}\\bigr)^2\n\\;\\;\\Rightarrow\\;\\;\nV_{GS1}=V_{TH1}+V_{OV1},\\quad V_{OV1}=\\sqrt{\\frac{2I_1}{k_1}}$$\nSince the source is ground,\n$$\\boxed{V_{IN}=V_{GS1}=V_{TH1}+\\sqrt{2I_1/k_1}}$$\nand\n$$V_{DS1}=V_X$$\n\n**Transistor $M_2$** (body effect included)\n$$V_{TH2}=V_{TH0}+\\gamma\\Bigl(\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\\Bigr)$$\n$$I_1=\\frac{1}{2}k_2\\bigl(V_{GS2}-V_{TH2}\\bigr)^2\n\\;\\;\\Rightarrow\\;\\;\nV_{GS2}=V_{TH2}+V_{OV2},\\quad V_{OV2}=\\sqrt{\\frac{2I_1}{k_2}}$$\nWith $V_{GS2}=V_{b1}-V_X$:\n$$\\boxed{V_X = V_{b1}-V_{TH2}-V_{OV2}}$$\n\n**Saturation conditions**\n- $M_1$: $V_{DS1}\\ge V_{OV1}\\;\\Rightarrow\\;V_X\\ge V_{OV1}$\n- $M_2$: $V_{DS2}=V_{out}-V_X\\ge V_{OV2}\\;\\Rightarrow\\;\\boxed{V_{out}\\ge V_{b1}-V_{TH2}}$\n\nIf $\\lambda\\neq 0$, $V_{out}$ is fixed by\n$$I_1=\\frac{1}{2}k_2(V_{GS2}-V_{TH2})^2\\bigl[1+\\lambda_2(V_{out}-V_X)\\bigr]$$\n\n---\n\n## 2. Small-Signal Model (low frequency)\n\nReplace each transistor by its hybrid-$\\pi$ model:\n- $M_1$: $g_{m1}v_{gs1}=g_{m1}v_{in}$, $r_{o1}$ between $X$ and ground, $v_{gs1}=v_{in}$\n- $M_2$: $v_{gs2}=-v_x$, $v_{bs2}=-v_x$ (body at ground)  \n  $\\Rightarrow$ drain-current contribution $-(g_{m2}+g_{mb2})v_x$  \n  with $r_{o2}$ between $v_{out}$ and $X$\n\nThe current source $I_1$ is open for AC; $V_{DD}$ is AC ground.\n\nSmall-signal parameters at the bias point:\n$$g_{m1}=\\frac{2I_1}{V_{OV1}}=k_1V_{OV1},\\qquad r_{o1}=\\frac{1}{\\lambda_1 I_1}$$\n$$g_{m2}=\\frac{2I_1}{V_{OV2}}=k_2V_{OV2},\\qquad r_{o2}=\\frac{1}{\\lambda_2 I_1}$$\n$$g_{mb2}=\\chi g_{m2},\\quad \\chi=\\frac{\\gamma}{2\\sqrt{2\\phi_F+V_X}}$$\n\n---\n\n## 3. Key Small-Signal Quantities\n\n### Input Resistance\nLooking into $v_{in}$ we see only the gate oxide of $M_1$:\n$$\\boxed{R_{in}=\\infty}$$\n\n### Intermediate Node $X$\nApplying KCL at $X$ and using $i_{d2}=0$ (no AC path from $v_{out}$ to ground except through $M_2$) gives\n$$v_x = -g_{m1}r_{o1}\\,v_{in}$$\n$$\\boxed{\\frac{v_x}{v_{in}}=-g_{m1}r_{o1}}$$\n\n### Output Resistance $R_{out}$\nApply a test voltage $v_t$ at $v_{out}$ with $v_{in}=0$. Solving KCL at $X$ and $v_{out}$ yields the well-known cascode result:\n$$\\boxed{R_{out}=r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\\approx (1+g_{m2}r_{o2})r_{o1}}$$\n\n### Voltage Gain $A_v=v_{out}/v_{in}$ (open-circuit, $R_L=\\infty$)\nFrom $i_{d2}=0$:\n$$v_{out}=v_x\\bigl[1+(g_{m2}+g_{mb2})r_{o2}\\bigr]$$\nSubstituting $v_x$:\n$$\\boxed{A_v = -g_{m1}r_{o1}\\Bigl[1+(g_{m2}+g_{mb2})r_{o2}\\Bigr]}$$\n\nIf $g_{m2}r_{o2}\\gg 1$ and $g_{mb2}\\approx 0.1\\!-\\!0.3\\,g_{m2}$:\n$$\\boxed{A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\nThe gain is the product of the common-source gain of $M_1$ ($-g_{m1}r_{o1}$) and the source-follower gain of $M_2$ ($1+g_{m2}r_{o2}$).\n\nIf a finite load $R_L$ is present (e.g. the output resistance $R_{SS}$ of $I_1$), replace $R_{out}$ by $R_{out}\\parallel R_L$ in the Thevenin equivalent; the loaded gain becomes\n$$A_{v,L}=A_v\\frac{R_L}{R_{out}+R_L}\\Bigl(1-\\frac{r_{o2}}{R_{out}}\\Bigr)^{-1}\\approx -g_{m1}(R_{out}\\parallel R_L-r_{o2})$$\n\n---\n\n## 4. Summary Table\n\n| Parameter | Expression |\n|-----------|------------|\n| DC bias $V_{IN}$ | $V_{TH1}+\\sqrt{2I_1/k_1}$ |\n| DC bias $V_X$ | $V_{b1}-V_{TH2}-\\sqrt{2I_1/k_2}$ |\n| $R_{in}$ | $\\infty$ |\n| $R_{out}$ | $r_{o1}+r_{o2}+(g_{m2}+g_{mb2})r_{o1}r_{o2}$ |\n| $v_x/v_{in}$ | $-g_{m1}r_{o1}$ |\n| $v_{out}/v_{in}$ | $-g_{m1}r_{o1}[1+(g_{m2}+g_{mb2})r_{o2}]$ |\n\n**Key insight:** The cascode transistor $M_2$ shields $M_1$ from the large voltage swing at $v_{out}$, multiplying the output resistance by $\\approx g_{m2}r_{o2}$ and giving a very high voltage gain $\\propto g_{m1}g_{m2}r_{o1}r_{o2}$, while the input resistance remains infinite. The current source $I_1$ sets the bias but does not load the AC signal (ideal source).",
        "format": "markdown",
        "sha256": "f8dd25e7aa7c9028878930aece883f55b18d345f2562c923dde221424f46e811"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The extra source-follower terminology is imprecise but does not change the correct topology or gain result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 28928,
        "total_tokens": 31085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 28928,
        "total_tokens": 31085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26975,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **cascode amplifier** (common-source stage with a cascode transistor):\n\n- **M₁** – input transistor (common-source), gate driven by $v_{in}$, source grounded.\n- **M₂** – cascode transistor, gate biased at DC voltage $V_{b1}$, source at node $X$, drain at $v_{out}$.\n- **I₁** – active load (ideal DC current source), AC open-circuit.\n- **V_DD** – supply.\n\nThe stack $M_1$–$M_2$ carries the same current $I_1$. The output is taken at the drain of $M_2$.\n\n---\n\n## 1. DC Operating Point\n\nAssume both NMOS devices are in **saturation** and neglect channel-length modulation ($\\lambda \\approx 0$) for the bias calculation.\n\n| Quantity | Expression |\n|----------|------------|\n| Drain current | $I_{D1}=I_{D2}=I_1$ |\n| $V_{GS1}$ | $V_{IN}$ |\n| Overdrive $V_{OV1}$ | $\\sqrt{\\dfrac{2I_1}{k_1}} = V_{IN}-V_{th1}$ |\n| $V_{GS2}$ | $V_{b1}-V_X$ |\n| Overdrive $V_{OV2}$ | $\\sqrt{\\dfrac{2I_1}{k_2}} = V_{GS2}-V_{th2}$ |\n| Node voltage $V_X$ | $V_X = V_{b1}-V_{th2}-V_{OV2}$ |\n| $V_{DS1}=V_X$ | Must satisfy $V_X > V_{OV1}$ |\n| $V_{DS2}=V_{out}-V_X$ | Must satisfy $V_{out} > V_{b1}-V_{th2}$ |\n\n**Saturation conditions:**\n$$\nV_{IN}>V_{th1},\\qquad V_X > V_{OV1},\\qquad V_{out}>V_{b1}-V_{th2}\n$$\n\nIf $\\lambda \\neq 0$, replace $I_1 \\to I_1(1+\\lambda V_{DS})$ in the square-law equations.\n\n> **Body effect on M₂:** If $M_2$ is in a p-substrate (body at ground), its threshold is $V_{th2}=V_{th0}+\\gamma\\bigl(\\sqrt{2\\phi_f+V_X}-\\sqrt{2\\phi_f}\\bigr)$.\n\n---\n\n## 2. Small-Signal (AC) Analysis\n\nFor AC, $V_{DD}$ and $V_{b1}$ are ground. The current source $I_1$ is an open circuit.\n\n### Small-signal model parameters\n- $g_{m1} = \\sqrt{2k_1 I_1}$ (or $\\mu_n C_{ox}(W/L)_1 V_{OV1}$)\n- $g_{m2} = \\sqrt{2k_2 I_1}$\n- $r_{o1} = \\dfrac{1}{\\lambda_1 I_1}$, $r_{o2} = \\dfrac{1}{\\lambda_2 I_1}$\n- If body effect applies to $M_2$: $g_{mb2} = \\chi g_{m2}$ with $\\chi \\approx 0.1\\!-\\!0.3$\n\n### Input resistance\nThe gate of $M_1$ is open:\n$$\n\\boxed{R_{in} = \\infty}\n$$\n\n### Output resistance $R_{out}$ (looking into $v_{out}$ with $v_{in}=0$)\n\nUsing KCL at $X$ and $v_{out}$:\n$$\n\\boxed{R_{out} = r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2} \\;\\approx\\; r_{o2}\\bigl(1+g_{m2}r_{o1}\\bigr)}\n$$\nWith body effect: replace $g_{m2}\\to (g_{m2}+g_{mb2})$.\n\n### Voltage gain $A_v = v_{out}/v_{in}$\n\nSolving the two-node system ($v_x$ at node $X$, $v_{out}$ at the drain):\n\n1. At $v_{out}$ (no load): $I_{D2}=0 \\;\\Rightarrow\\; v_{out}=v_x\\bigl[1+(g_{m2}+g_{mb2})r_{o2}\\bigr]$\n2. At $X$: $g_{m1}v_{in}+v_x/r_{o1}=0 \\;\\Rightarrow\\; v_x = -g_{m1}r_{o1}v_{in}$\n\nCombining:\n$$\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}r_{o1}\\Bigl[1+(g_{m2}+g_{mb2})r_{o2}\\Bigr]}\n$$\n\nIf body effect is ignored ($g_{mb2}=0$):\n$$\n\\boxed{A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}\n$$\n\nThis is $\\sim g_{m2}r_{o2}$ times larger than a simple common-source stage ($A_{v,CS}\\approx -g_{m1}r_{o1}$) because the cascode transistor $M_2$ boosts the output resistance.\n\n---\n\n## 3. Summary of Key Results\n\n| Parameter | Formula (ignoring $\\lambda$ in bias, including in AC) |\n|-----------|------------------------------------------------------|\n| Bias current | $I_{D1}=I_{D2}=I_1$ |\n| $V_X$ | $V_{b1}-V_{th2}-\\sqrt{2I_1/k_2}$ |\n| $R_{in}$ | $\\infty$ |\n| $R_{out}$ | $r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}$ |\n| $A_v$ | $-g_{m1}r_{o1}\\bigl[1+g_{m2}r_{o2}\\bigr]$ |\n\nThe circuit therefore provides **high voltage gain** and **very high output resistance**, which is the hallmark of a cascode configuration, while maintaining the same input impedance as a single MOSFET stage.",
        "format": "markdown",
        "sha256": "ee507caf5369550cca367011d113219797c057b9fd5378d07c367ae542369872"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-current-source-load gain expression. The additional bias and output-resistance analysis is consistent with the topology.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24893,
        "total_tokens": 27050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24893,
        "total_tokens": 27050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **single-stage telescopic cascode amplifier** (common-source + common-gate) with an ideal DC current-source load \\(I_1\\).\n\n*   \\(M_1\\) – input transistor (NMOS): gate = \\(v_{in}\\), source = ground, drain = node \\(X\\).\n*   \\(M_2\\) – cascode transistor (NMOS): gate = DC bias \\(V_{b1}\\), source = node \\(X\\), drain = \\(v_{out}\\).\n*   \\(I_1\\) – bias/load current source connected between \\(V_{DD}\\) and \\(v_{out}\\).\n\nFor AC (small-signal) analysis \\(V_{DD}\\) is ground and the ideal current source \\(I_1\\) is an open circuit.\n\n---\n\n## 1. DC Operating Point (Bias Conditions)\n\nAssume both transistors are in **saturation** and neglect channel-length modulation (\\(\\lambda \\approx 0\\)).\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\n**Transistor \\(M_1\\):**\n\\[\nI_{D1}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{GS1}-V_{TH1})^2\n\\]\nWith \\(V_{S1}=0\\) and \\(V_{G1}=V_{in,DC}\\):\n\\[\nV_{GS1}=V_{in,DC}=V_{TH1}+\\sqrt{\\frac{2I_1}{\\mu_n C_{ox}(W/L)_1}}\\equiv V_{TH1}+V_{OV1}\n\\]\n\n**Transistor \\(M_2\\):**\n\\[\nI_{D2}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS2}-V_{TH2})^2\n\\]\nWith \\(V_{S2}=V_X\\) and \\(V_{G2}=V_{b1}\\):\n\\[\nV_{GS2}=V_{b1}-V_X = V_{TH2}+V_{OV2}\n\\quad\\Rightarrow\\quad\nV_X = V_{b1}-V_{TH2}-V_{OV2}\n\\]\nwhere \\(V_{OV2}=\\sqrt{2I_1/[\\mu_n C_{ox}(W/L)_2]}\\).\n\n**Saturation conditions:**\n\\[\nV_{DS1}=V_X \\ge V_{OV1}, \\qquad\nV_{DS2}=v_{out}-V_X \\ge V_{OV2}\n\\;\\Rightarrow\\;\nv_{out}\\ge V_{b1}-V_{TH2}\n\\]\n\nThe DC value of \\(v_{out}\\) is set by the \\(I\\!-\\!V\\) characteristic of \\(M_2\\) (through \\(\\lambda_2\\)) since \\(I_1\\) forces the current.\n\n---\n\n## 2. Small-Signal Model\n\nReplace \\(M_1\\) and \\(M_2\\) by their small-signal equivalents (\\(g_{m1},r_{o1}\\) and \\(g_{m2},r_{o2}\\)).  \nThe gate of \\(M_2\\) is AC ground (\\(v_{g2}=0\\)); the source of \\(M_1\\) is AC ground (\\(v_{s1}=0\\)).\n\nKey relations:\n*   \\(v_{gs1}=v_{in}\\)\n*   \\(v_{gs2}=v_{g2}-v_{s2}=0-v_x=-v_x\\)  \\(\\Rightarrow\\)  \\(v_{sg2}=v_x\\)\n\nThe current source \\(I_1\\) is open for AC, so there is **no load resistor** at \\(v_{out}\\) other than the transistor impedances.\n\n---\n\n## 3. Small-Signal Gain \\(A_v = v_{out}/v_{in}\\)\n\nWrite KCL at nodes \\(X\\) and \\(v_{out}\\).\n\n**At \\(v_{out}\\):**\nOnly the branch through \\(M_2\\) connects to \\(X\\).\n\\[\n\\frac{v_{out}-v_x}{r_{o2}} - g_{m2}v_x = 0\n\\;\\Rightarrow\\;\nv_{out}=v_x\\bigl(1+g_{m2}r_{o2}\\bigr)\n\\tag{1}\n\\]\n\n**At node \\(X\\):**\nCurrent leaving downward through \\(M_1\\):\n\\[\ni_{d1}=g_{m1}v_{in}+\\frac{v_x}{r_{o1}}\n\\]\nCurrent leaving upward through \\(M_2\\) (source terminal):\n\\[\ni_{s2}=g_{m2}v_x-\\frac{v_{out}-v_x}{r_{o2}}=0\n\\]\n(using (1)). Hence KCL gives\n\\[\ng_{m1}v_{in}+\\frac{v_x}{r_{o1}}=0\n\\;\\Rightarrow\\;\nv_x=-g_{m1}r_{o1}\\,v_{in}\n\\tag{2}\n\\]\n\nSubstitute (2) into (1):\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}r_{o1}\\bigl(1+g_{m2}r_{o2}\\bigr)}\n\\]\n\nIf \\(g_{m2}r_{o2}\\gg 1\\) (the usual case):\n\n\\[\n\\boxed{A_v \\approx -g_{m1}g_{m2}\\,r_{o1}r_{o2}}\n\\]\n\nThis is the classic **cascode gain**: the input stage (\\(M_1\\)) provides transconductance \\(g_{m1}\\), and the cascode stage (\\(M_2\\)) multiplies the impedance seen at \\(X\\) by \\((1+g_{m2}r_{o2})\\).\n\n---\n\n## 4. Output Resistance \\(R_{out}\\)\n\nSet \\(v_{in}=0\\) and apply a test voltage \\(v_t\\) at \\(v_{out}\\). Solving the two-node system yields\n\n\\[\n\\boxed{R_{out}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\approx r_{o2}\\bigl(1+g_{m2}r_{o1}\\bigr)}\n\\]\n\nThis is the well-known cascode output resistance. Note that with the ideal current-source load (\\(R_{load}\\to\\infty\\)), the total load impedance is just \\(R_{out}\\), and indeed\n\\[\nA_v = -G_m R_{out}\\quad\\text{with}\\quad G_m\\approx g_{m1}.\n\\]\n\n---\n\n## 5. Input Resistance\n\nThe gate of \\(M_1\\) is insulated, so\n\n\\[\n\\boxed{R_{in}\\approx \\infty}\n\\]\n\n---\n\n## Summary of Key Results\n\n| Parameter | Expression (exact) | Approximation (\\(g_m r_o \\gg 1\\)) |\n|-----------|-------------------|-----------------------------------|\n| **DC bias** | \\(I_{D1}=I_{D2}=I_1\\) | — |\n| **Voltage gain** | \\(-g_{m1}r_{o1}(1+g_{m2}r_{o2})\\) | \\(-g_{m1}g_{m2}r_{o1}r_{o2}\\) |\n| **Output resistance** | \\(r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\\) | \\(r_{o2}(1+g_{m2}r_{o1})\\) |\n| **Input resistance** | \\(\\infty\\) | \\(\\infty\\) |\n\nThe circuit therefore provides **very high voltage gain** and **very high output resistance**, which are the defining features of a cascode amplifier, while maintaining an infinite input resistance suitable for voltage amplification.",
        "format": "markdown",
        "sha256": "99490d682e3639a2f441789eb9b4196e134e51ce47e093ea46c81084c649decc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the ideal-load gain equivalent to the golden expression. Omitting body effect is allowed by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 33861,
        "total_tokens": 36018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 33861,
        "total_tokens": 36018,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit topology:\n\n**Transistor connections:**\n- **M₁**: Gate = V_in (signal input), Source = Ground, Drain = connected to M₂'s source → **Common-Source (CS)** stage\n- **M₂**: Gate = V_b1 (constant DC bias, AC ground), Source = M₁'s drain, Drain = V_out node → **Common-Gate (CG)** stage\n- **R_D**: Load resistor from V_DD to the output node\n\n**Why this is a cascode:**\nA cascode structure is defined by stacking a **common-source/emitter** transistor with a **common-gate/base** transistor, where:\n1. The input signal drives the bottom transistor (M₁)\n2. The top transistor (M₂) has its gate biased at a fixed voltage (V_b1)\n3. The source of the top transistor connects to the drain of the bottom transistor\n4. The output is taken from the drain of the top transistor\n\nThis circuit matches that definition exactly: M₁ amplifies the input, and M₂ acts as a current buffer with its gate at AC ground, providing high output resistance and reducing the Miller effect on M₁.\n\n**Answer: Yes**, this is a **cascode amplifier** (specifically, a common-source cascode with resistive load R_D). The pair M₁-M₂ forms the classic cascode transistor stack.",
        "format": "markdown",
        "sha256": "fa6fee262457e05cb36b82def106922c661442870086548981ce89382ba888f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1: it is a PMOS source follower with its drain grounded, not a common-source device.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 1851,
        "total_tokens": 3908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 1851,
        "total_tokens": 3908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit topology:\n\n**Transistor connections:**\n- **M₁**: Gate = V_in, Source = Ground, Drain = Source of M₂\n- **M₂**: Gate = V_b1 (AC ground/bias), Source = Drain of M₁, Drain = V_out (through load R_D to V_DD)\n\n**Why this is a cascode:**\nThis is the classic **telescopic (common-source) cascode** structure:\n1. **M₁** acts as the **common-source** input stage (signal enters at gate, source is AC ground).\n2. **M₂** acts as the **common-gate** cascode transistor (gate is at fixed DC bias V_b1, so AC ground; signal enters at its source from M₁'s drain, and output is taken at its drain).\n\nThe two transistors are stacked in series between V_out and ground, with the drain of M₁ connected directly to the source of M₂. This stacking is exactly what defines a cascode amplifier — it provides high output resistance and good isolation between input and output (reducing Miller effect on M₁).\n\n**Note:** Both transistors are NMOS (source of M₂ is at lower potential than its drain), so this is specifically an **NMOS-NMOS cascode** with a resistive load R_D.\n\n**Answer: Yes**, this is a cascode structure.",
        "format": "markdown",
        "sha256": "01f12cb297a0575425e9e247c9eb12a886b48efc4f9616bbcc870af9ac94b90f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a grounded-source common-source device. M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 2165,
        "total_tokens": 4222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 2165,
        "total_tokens": 4222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes**, this is a **cascode structure** (specifically a **common-source cascode amplifier**).\n\nHere is why:\n\n| Transistor | Terminal Connections | Configuration |\n|---|---|---|\n| **M₁** | Gate = V_in (signal input)<br>Source = Ground<br>Drain = Source of M₂ | **Common-Source** (input stage) |\n| **M₂** | Gate = V_b1 (fixed DC bias → AC ground)<br>Source = Drain of M₁<br>Drain = V_out (through load R_D) | **Common-Gate** (cascode stage) |\n\nThe key features of a cascode are present:\n1. **Two stacked transistors** with the drain of the bottom one (M₁) connected to the source of the top one (M₂).\n2. The **input is applied to the gate of M₁** (common-source).\n3. The **gate of M₂ is held at a constant bias V_b1**, so for AC signals it acts as ground—making M₂ a common-gate stage.\n4. The **output is taken at the drain of M₂**, where the load resistor R_D connects to V_DD.\n\nThis topology provides high output resistance and good isolation between input and output (reducing the Miller effect on M₁), which are the hallmark benefits of a cascode amplifier.",
        "format": "markdown",
        "sha256": "5813e65b7c04d3df0e1a3c0a10dc5ae4769906ec5deba41789ec9cbc578b9cbd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M₁ as a common-source device. M₁ is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 2181,
        "total_tokens": 4238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 2181,
        "total_tokens": 4238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1883,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies the feedback capacitance between the input and output of a gain stage by the factor \\((1-A_v)\\). In a high-gain amplifier (\\(|A_v| \\gg 1\\)), a small physical capacitance \\(C_{gd}\\) (MOSFET) or \\(C_{\\mu}\\) (BJT) can appear as a huge effective capacitance at the input, killing bandwidth.\n\nA **cascode** (common-source/emitter followed by common-gate/base) suppresses this because the high overall gain is **not** seen across the input transistor’s feedback capacitor.\n\n---\n\n### 1. The problem in a single stage\nIn a common-source (CS) or common-emitter (CE) amplifier:\n- Voltage gain is large: \\(|A_v| \\approx g_m R_D\\) (or \\(g_m R_C\\)).\n- The gate-drain (or base-collector) capacitance \\(C_f\\) connects input to output.\n- Effective input capacitance:\n  \\[\n  C_{in} \\approx C_{gs} + C_f(1+|A_v|)\n  \\]\n  If \\(|A_v| = 50\\) and \\(C_f = 10\\,\\text{fF}\\), the Miller term is \\(\\sim 500\\,\\text{fF}\\).\n\n---\n\n### 2. Cascode structure\nConsider a MOSFET cascode (the BJT version is analogous):\n\n- **M1**: Common-source (input at gate, source grounded).\n- **M2**: Common-gate (gate at AC ground, source at M1’s drain, drain is the output).\n\nThe overall gain from gate of M1 to the final drain is still high:\n\\[\nA_{v,\\text{total}} \\approx -g_{m1}R_D\n\\]\nBut the **intermediate node** (drain of M1 / source of M2) swings very little.\n\n---\n\n### 3. Why the intermediate node swings little\nThe impedance looking into the source of M2 is approximately \\(1/g_{m2}\\) (ignoring \\(r_o\\)). Thus the load on M1 is not \\(R_D\\) but \\(\\approx 1/g_{m2}\\).\n\nThe voltage gain of the **first stage alone** is:\n\\[\nA_{v1} = \\frac{V_{x}}{V_{g1}} \\approx -\\frac{g_{m1}}{g_{m2}} \\approx -1\n\\]\n(if \\(g_{m1} \\approx g_{m2}\\)).\n\nSo across M1’s feedback capacitance \\(C_{gd1}\\), the voltage change is only about **1×** the input, not the full \\(|A_{v,\\text{total}}|\\).\n\nThe Miller multiplication factor for \\(C_{gd1}\\) becomes:\n\\[\n1 - A_{v1} \\approx 1 - (-1) = 2\n\\]\nHence:\n\\[\nC_{Miller,1} \\approx C_{gd1}(1+|A_{v1}|) \\approx 2C_{gd1}\n\\]\n\n---\n\n### 4. The second transistor’s feedback cap is harmless at the input\n- **M2** has its own \\(C_{gd2}\\) between its gate and drain.\n- But M2’s gate is at **AC ground**.\n- Therefore \\(C_{gd2}\\) connects the **output** to ground; it adds to the output load but does **not** appear multiplied at the input.\n\n---\n\n### 5. Result\nThe total input capacitance of the cascode is roughly:\n\\[\nC_{in} \\approx C_{gs1} + 2C_{gd1}\n\\]\ncompared with:\n\\[\nC_{in,CS} \\approx C_{gs1} + C_{gd1}(1+g_{m1}R_D)\n\\]\n\nEven though the cascode still delivers high overall gain (\\(\\approx -g_{m1}R_D\\)), that gain is distributed:\n- Stage 1 (CS): gain \\(\\approx -1\\)\n- Stage 2 (CG): gain \\(\\approx 1+g_{m2}R_D\\)\n\nThe feedback path of the input device only “sees” the first stage’s small gain.\n\n---\n\n### Summary\n| Configuration | Gain across \\(C_f\\) of input device | Miller factor | Input \\(C\\) impact |\n|---|---|---|---|\n| CS / CE | \\(|A_v| \\approx g_m R\\) (large) | \\(1+|A_v|\\) (huge) | Severe |\n| Cascode | \\(|A_{v1}| \\approx g_{m1}/g_{m2} \\approx 1\\) | \\(\\approx 2\\) | Minimal |\n\nBecause the drain/collector of the input transistor is held at a nearly constant AC voltage by the low input impedance (\\(\\approx 1/g_m\\)) of the cascode device, the Miller multiplication of its feedback capacitance is drastically reduced. This is why cascodes are favored in high-speed and RF amplifiers.",
        "format": "markdown",
        "sha256": "4a4620351617dbff7b4bf6e7f1ee4f5dd2cc6adbf07930d49f8c61df8943d612"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting gain of about −1 across M1’s Cgd, giving a Miller factor near 2 rather than the full-stage-gain factor. The ‘nearly constant’ wording slightly overstates the clamping, but the answer explicitly gives the correct gain and factor.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3814,
        "total_tokens": 3842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3814,
        "total_tokens": 3842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies any capacitance that bridges the input and output of an inverting gain stage by roughly \\((1-|A_v|)\\). In a common-source (CS) or common-emitter (CE) amplifier the voltage gain \\(|A_v|\\) is large (\\(\\approx g_m R_L\\)), so the gate-drain (or base-collector) capacitance \\(C_{gd}\\) (\\(C_{\\mu}\\)) is multiplied into a huge effective input capacitance, killing bandwidth.\n\nA **cascode** (CS/CE followed by CG/CB) breaks this feedback path in two ways:\n\n---\n\n### 1. The intermediate node swings very little\nIn a cascode, the input transistor \\(M_1\\) (CS) drives the **source** of the cascode transistor \\(M_2\\) (CG), whose gate is at AC ground.\n\nThe impedance looking into the source of \\(M_2\\) is very low:\n\\[\nZ_X \\approx \\frac{1}{g_{m2}} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}}\n\\]\n\nThe small-signal gain from the input (\\(V_{in}\\)) to that intermediate node (\\(V_X\\), the drain of \\(M_1\\)) is therefore only\n\\[\nA_{v1} = \\frac{V_X}{V_{in}} \\approx -\\frac{g_{m1}}{g_{m2}} \\approx -1\n\\]\n(if \\(g_{m1}\\approx g_{m2}\\)).\n\nBecause \\(|A_{v1}|\\approx 1\\), the Miller multiplication of \\(C_{gd1}\\) (the feedback cap of the input device) is tiny:\n\\[\nC_{\\text{Miller},1} = C_{gd1}\\bigl(1 - A_{v1}\\bigr) \\approx C_{gd1}(1-(-1)) = 2C_{gd1}\n\\]\n\nCompare this to a single CS stage where \\(|A_v|\\approx g_m R_D\\) might be 20–50, giving \\(C_{\\text{Miller}}\\approx C_{gd}(1+|A_v|)\\) — an order of magnitude larger.\n\n---\n\n### 2. The other feedback cap sees AC ground\nThe gate-drain capacitance of the cascode device, \\(C_{gd2}\\), connects the **output** (drain of \\(M_2\\)) to the **gate of \\(M_2\\)**, which is fixed at AC ground. There is no voltage gain across it, so **no Miller multiplication occurs at all**; \\(C_{gd2}\\) merely adds to the output load capacitance.\n\n---\n\n### 3. The large overall gain is “hidden” behind \\(M_2\\)\nThe total gain from \\(V_{in}\\) to the output \\(V_{out}\\) is still large:\n\\[\nA_{v,\\text{total}} \\approx -g_{m1}(r_{o2}\\parallel R_D)\n\\]\nBut this high gain exists **between node X and the output**, not between the input and the output. The input transistor never “sees” the full swing, so its feedback capacitance is not multiplied by the large overall gain.\n\n---\n\n### Summary\n\n| Configuration | Gain seen by \\(C_{gd,\\text{input}}\\) | Miller factor | Effective input cap |\n|---|---|---|---|\n| **Common-source** | \\(-g_m R_D\\) (large) | \\(1+|A_v|\\) (large) | \\(C_{gs}+C_{gd}(1+|A_v|)\\) |\n| **Cascode** | \\(\\approx -1\\) | \\(\\approx 2\\) | \\(C_{gs1}+2C_{gd1}\\) |\n\nBecause the voltage swing at the drain of the input transistor is suppressed by the low impedance of the cascode device, the Miller effect on the input capacitance is drastically reduced. This is why cascode amplifiers achieve much higher bandwidth and are widely used in RF and high-speed analog circuits. (The BJT analog—common-emitter followed by common-base—behaves identically with \\(C_{\\mu}\\).)",
        "format": "markdown",
        "sha256": "6e65bde350b4d4aeb70f9bef4aa67e4334e619f74f97882ce95a42512df5caf5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the low-impedance M2 source node, the roughly −gm1/gm2 gain to M1’s drain, and the resulting ~2× Miller factor for Cgd1 rather than the full-stage gain. The loose “tiny” wording and stray sign typo in the opening formula do not undermine the core explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 2593,
        "total_tokens": 2621,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 2593,
        "total_tokens": 2621,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies a feedback capacitance between the input and output of an inverting amplifier by the factor \\((1-A_v)\\), where \\(A_v\\) is the voltage gain across that capacitor. In a single-stage common-source (CS) or common-emitter (CE) amplifier, \\(|A_v|\\) is very large, so a small physical capacitance (e.g., \\(C_{gd}\\) or \\(C_{\\mu}\\)) appears enormous at the input and kills bandwidth.\n\nA **cascode** (CS + CG, or CE + CB) suppresses this because it splits the total gain into two parts: a **small-gain input stage** and a **large-gain output stage** that is isolated from the input.\n\n---\n\n### 1. Where the feedback capacitance sits\nConsider a MOSFET cascode: \\(M_1\\) (common-source) and \\(M_2\\) (common-gate).\n\n- **\\(C_{gd1}\\)** connects the **gate of \\(M_1\\)** (input) to the **drain of \\(M_1\\)** (node \\(X\\)).\n- **\\(C_{gd2}\\)** connects the **gate of \\(M_2\\)** (AC ground, fixed bias) to the **drain of \\(M_2\\)** (output).\n\nThere is **no direct capacitance** between the gate of \\(M_1\\) and the final output node.\n\n---\n\n### 2. The gain across \\(C_{gd1}\\) is tiny\nThe overall gain from \\(V_{in}\\) to \\(V_{out}\\) is large:\n\\[\nA_{v,\\text{total}} \\approx -g_{m1}R_{\\text{out}} \\quad (\\text{large})\n\\]\n\nBut the gain from \\(V_{in}\\) to the intermediate node \\(V_X\\) (the drain of \\(M_1\\) / source of \\(M_2\\)) is **not** large. Because \\(M_2\\) presents a very low impedance at its source (\\(\\approx 1/g_{m2}\\)):\n\\[\nA_{v1} = \\frac{V_X}{V_{in}} \\approx -\\frac{g_{m1}}{g_{m2}+g_{mb2}+1/r_{o1}+1/r_{o2}} \\approx -1 \\;(\\text{or smaller})\n\\]\n\nSo \\(|A_{v1}| \\approx 1\\), not 50–100.\n\n---\n\n### 3. Miller multiplication is therefore small\nThe Miller factor for \\(C_{gd1}\\) is:\n\\[\nC_{\\text{Miller}} = C_{gd1}\\bigl(1 - A_{v1}\\bigr) \\approx C_{gd1}(1+1) \\approx 2C_{gd1}\n\\]\n\nCompare this to a single CS stage where \\(A_v \\approx -g_m R_D\\) might be \\(-50\\):\n\\[\nC_{\\text{Miller,CS}} \\approx C_{gd}(1+50) \\approx 51C_{gd}\n\\]\n\nThus in the cascode, the input capacitance contribution from \\(C_{gd1}\\) is only about **twice** its physical value—essentially negligible compared with the single-stage case.\n\n---\n\n### 4. The large gain is “behind” the cascode device\nThe high gain \\(-g_{m1}R_{\\text{out}}\\) exists between \\(V_{in}\\) and \\(V_{out}\\), but:\n- The feedback path for that gain does **not** include \\(C_{gd1}\\) (it ends at node \\(X\\)).\n- \\(C_{gd2}\\) is tied between AC ground (gate of \\(M_2\\)) and the output, so it does **not** load the input at all.\n\nThe cascode transistor \\(M_2\\) acts as a **shield**: it allows the input transistor to operate with a small voltage swing at its drain, while the large swing occurs at the drain of \\(M_2\\), far removed from the input.\n\n---\n\n### 5. Extra benefit: low impedance at node \\(X\\)\nBecause the source of \\(M_2\\) is \\(\\approx 1/g_{m2}\\), node \\(X\\) is a low-impedance point. This also:\n- Reduces the effect of \\(M_1\\)’s output resistance and parasitic capacitances (\\(C_{db1}\\)).\n- Pushes the pole at node \\(X\\) to a very high frequency, further improving bandwidth.\n\n---\n\n### Summary\n| Configuration | Gain across feedback cap | Miller factor | Effective \\(C_{in}\\) contribution |\n|---|---|---|---|\n| Common-Source | \\(|A_v| \\gg 1\\) (e.g., 50) | \\(\\approx |A_v|\\) | Huge (\\(\\sim |A_v|C_{gd}\\)) |\n| Cascode (input stage) | \\(|A_{v1}| \\approx 1\\) | \\(\\approx 2\\) | Small (\\(\\sim 2C_{gd1}\\)) |\n\n**In short:** The cascode separates the high-gain path from the input node. The input transistor sees only a small voltage swing at its drain, so its gate-drain capacitance is multiplied by only ~2. The large overall gain is realized at the output, but no feedback capacitance connects that high-swing node back to the input, leaving the Miller effect strongly suppressed.",
        "format": "markdown",
        "sha256": "7c470073ea4674e8b6a3997bb347874650e6b4091b4e6054d63659f1e1ea5a0c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node and derives an approximately −1 gain to that node, giving about 2× Miller multiplication rather than the large common-source factor. However, calling the gain “tiny” and the effect “essentially negligible” overstates the reduction; the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 2852,
        "total_tokens": 2880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 2852,
        "total_tokens": 2880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows two MOSFETs, **M₁** (PMOS) and **M₂** (NMOS), stacked between the supply **V_DD** and the bias node **V_b1**.  \nThe intermediate node is the output **V_out**.\n\n| Transistor | Type | Source | Drain | Gate | Body (substrate/well) |\n|------------|------|--------|-------|------|------------------------|\n| **M₁** | PMOS | V_DD | V_out | **V_b2** | **V_b2** (n‑well bias) |\n| **M₂** | NMOS | **V_b1** | V_out | **V_in** | Ground (0) – the substrate reference shown near V_in |\n\nSo the circuit is a **two‑transistor push‑pull (common‑source) stage** with separate gate controls (V_in and V_b2) and with **body‑effect** present on both devices because neither body is tied to its source:\n\n* **M₁:**  V_SB1 = V_S – V_B = V_DD – V_b2  \n* **M₂:**  V_SB2 = V_S – V_B = V_b1 – 0 = V_b1\n\nThe gate currents are zero, hence in DC steady state\n\n\\[\nI_{D1}=I_{D2}=I_D .\n\\]\n\nBelow is the complete DC analysis (square‑law model with channel‑length modulation λ; set λ=0 for the implicit solution).\n\n---\n\n## 1. Threshold Voltages with Body Effect\n\n\\[\n\\begin{aligned}\nV_{thn} &= V_{th0n}+\\gamma_n\\!\\left(\\sqrt{2|\\phi_F|+|V_{SB2}|}-\\sqrt{2|\\phi_F|}\\right) \\\\\n        &= V_{th0n}+\\gamma_n\\!\\left(\\sqrt{2|\\phi_F|+V_{b1}}-\\sqrt{2|\\phi_F|}\\right) \\\\[4pt]\n|V_{thp}| &= |V_{th0p}|+\\gamma_p\\!\\left(\\sqrt{2|\\phi_F|+|V_{SB1}|}-\\sqrt{2|\\phi_F|}\\right) \\\\\n          &= |V_{th0p}|+\\gamma_p\\!\\left(\\sqrt{2|\\phi_F|+|V_{DD}-V_{b2}|}-\\sqrt{2|\\phi_F|}\\right)\n\\end{aligned}\n\\]\n\n---\n\n## 2. Terminal Voltages for Each Transistor\n\n**M₁ (PMOS)**\n\\[\nV_{SG1}=V_{DD}-V_{b2},\\qquad V_{SD1}=V_{DD}-V_{out}\n\\]\n\n**M₂ (NMOS)**\n\\[\nV_{GS2}=V_{in}-V_{b1},\\qquad V_{DS2}=V_{out}-V_{b1}\n\\]\n\n---\n\n## 3. Regions of Operation\n\n| Transistor | Cutoff | Triode (Linear) | Saturation |\n|------------|--------|-----------------|------------|\n| **M₁** | V_SG1 ≤ |V_thp|  ⇒  V_b2 ≥ V_DD–|V_thp| | V_SG1 > |V_thp| **and** V_SD1 < V_SG1–|V_thp| ⇒ V_out > V_b2+|V_thp| | V_SG1 > |V_thp| **and** V_SD1 ≥ V_SG1–|V_thp| ⇒ **V_out ≤ V_b2+|V_thp|** |\n| **M₂** | V_GS2 ≤ V_thn ⇒ V_in ≤ V_b1+V_thn | V_GS2 > V_thn **and** V_DS2 < V_GS2–V_thn ⇒ V_out < V_in–V_thn | V_GS2 > V_thn **and** V_DS2 ≥ V_GS2–V_thn ⇒ **V_out ≥ V_in–V_thn** |\n\nBecause I_D1 = I_D2, **both devices cannot be in saturation with arbitrary inputs**; one of them is usually in triode (or cutoff) and sets V_out.\n\n---\n\n## 4. Current Equations\n\n### M₁ – always in saturation when “on” (if gate ≠ drain)  \nIf V_SG1 > |V_thp|:\n\n\\[\nI_{D1}= \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1\n\\bigl(V_{DD}-V_{b2}-|V_{thp}|\\bigr)^2\n\\bigl(1+\\lambda_1(V_{DD}-V_{out})\\bigr)\n\\]\n\n*(If λ₁=0, I_D1 depends only on V_b2.)*\n\n### M₂ – depends on region\n\n**Saturation** (V_out ≥ V_in – V_thn):\n\n\\[\nI_{D2}= \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\bigl(V_{in}-V_{b1}-V_{thn}\\bigr)^2\n\\bigl(1+\\lambda_2(V_{out}-V_{b1})\\bigr)\n\\]\n\n**Triode** (V_out < V_in – V_thn):\n\n\\[\nI_{D2}= \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\left[(V_{in}-V_{b1}-V_{thn})(V_{out}-V_{b1})\n-\\frac{1}{2}(V_{out}-V_{b1})^2\\right]\n\\bigl(1+\\lambda_2(V_{out}-V_{b1})\\bigr)\n\\]\n\n---\n\n## 5. Solving for V_out (DC Transfer Characteristic)\n\nSet I_D1 = I_D2 and solve for V_out as a function of V_in (with V_DD, V_b1, V_b2 fixed).\n\n### Case A: M₂ in saturation, M₁ in triode\nThis occurs when V_out is high (close to V_DD).\n\n\\[\n\\frac{1}{2}k_p\\bigl(V_{DD}-V_{b2}-|V_{thp}|\\bigr)^2\n= \\frac{1}{2}k_n\\bigl(V_{in}-V_{b1}-V_{thn}\\bigr)^2\n\\]\n\nThis gives the **boundary condition** on V_in; it does not determine V_out uniquely—V_out lies in the triode range of M₁.\n\n### Case B: M₂ in triode, M₁ in saturation\nThis is the usual operating region for a “pull‑down” action.\n\nSet\n\n\\[\n\\frac{1}{2}k_p\\bigl(V_{SG1}-|V_{thp}|\\bigr)^2\n= k_n\\left[(V_{GS2}-V_{thn})V_{DS2}-\\frac{1}{2}V_{DS2}^2\\right]\n\\]\n\nSubstituting V_SG1 = V_DD–V_b2, V_DS2 = V_out–V_b1, V_GS2 = V_in–V_b1 yields a **quadratic equation in V_out**:\n\n\\[\n\\boxed{\n\\frac{1}{2}k_p\\bigl(V_{DD}-V_{b2}-|V_{thp}|\\bigr)^2\n= k_n\\Bigl[(V_{in}-V_{b1}-V_{thn})(V_{out}-V_{b1})\n-\\tfrac{1}{2}(V_{out}-V_{b1})^2\\Bigr]\n}\n\\]\n\nSolving for V_out (taking the root that lies in V_b1 < V_out < V_in–V_thn):\n\n\\[\nV_{out}=V_{b1}+\\frac{k_n}{k_n+k_p}\\Bigl[\\dots\\Bigr]\n\\quad\\text{(explicit root of the quadratic)}\n\\]\n\n### Case C: Both in cutoff\nIf V_in ≤ V_b1 + V_thn **and** V_b2 ≥ V_DD – |V_thp|, then I_D ≈ 0 and V_out is floating (determined by load capacitance).\n\n### Case D: Both in triode\nSet the two triode expressions equal; this gives another quadratic for V_out, valid only when both triode conditions hold simultaneously (rare for large swings).\n\n---\n\n## 6. Small‑Signal Gain (optional AC analysis)\n\nIf a small signal v_in is superimposed on V_in and v_out on V_out, linearize around the DC point (V_OUT, I_D):\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_{m2}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\n\\]\n\nwhere\n\n\\[\ng_{m2}=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS2}-V_{thn}),\\qquad\ng_{m1}=\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{SG1}-|V_{thp}|)\n\\]\n\nand the body‑transconductances are\n\n\\[\ng_{mb1}=\\frac{\\gamma_p}{2\\sqrt{2|\\phi_F|+|V_{SB1}|}}\\,g_{m1},\\qquad\ng_{mb2}=\\frac{\\gamma_n}{2\\sqrt{2|\\phi_F|+V_{SB2}}}\\,g_{m2}.\n\\]\n\nBecause V_SB2 = V_b1 ≠ 0, **g_mb2 is nonzero** and reduces the gain.\n\n---\n\n## 7. Summary of Key Results\n\n1. **Body effect modifies both thresholds:**\n   - Raising V_b1 increases V_thn (M₂ becomes harder to turn on).\n   - Lowering V_b2 (making |V_SB1| larger) increases |V_thp| (M₁ becomes harder to turn on).\n\n2. **DC operating point** is found by solving I_D1 = I_D2. For the common region (M₁ sat., M₂ triode) this is the quadratic shown in Case B.\n\n3. **Output swing:**\n   - **High:** V_out ≈ V_DD (when M₂ is off).\n   - **Low:** V_out ≈ V_b1 (when M₁ is off).\n\n4. **Transfer characteristic V_out(V_in)** is monotonic decreasing: as V_in rises, M₂ pulls V_out down toward V_b1; as V_in falls, M₁ pulls V_out up toward V_DD.\n\nIf you substitute specific values for V_DD, V_b1, V_b2, (W/L)₁, (W/L)₂, V_th0, γ, and 2φ_F, the quadratic in Case B can be solved numerically for the exact V_out(V_in) curve.",
        "format": "markdown",
        "sha256": "3fa89d4ef70e7d9e9f3f1d8d02d9f1d105ccdb8e7dbbab4e7190b38a4cb1c2b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2's gate and identifies a common-source stage, whereas the circuit is common-gate with Vin at M2's source; the golden solution explicitly assigns this error a score of 0.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 31760,
        "total_tokens": 33865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 31760,
        "total_tokens": 33865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29327,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **single-stage common-source amplifier with a PMOS active load** and an input-protection network.\n\n| Element | Connection / Type | Role |\n|---|---|---|\n| **M₁** | PMOS: Source → VDD, Gate → Vb₂, Drain → Vout | Active load (current-source load) |\n| **M₂** | NMOS: Drain → Vout, Source → Vb₁ (ground), Gate → Vin | Amplifying (input) transistor |\n| **D** | Diode (or Zener) from the Vin node to ground (Vb₁) | Input over-voltage protection / clamp |\n| **Vb₁** | DC bias (AC ground) | Source bias of M₂ (here 0 V) |\n| **Vb₂** | DC bias (AC ground) | Gate bias of M₁ |\n| **Vout** | Drain node of M₁ and M₂ | Output node |\n\nBecause Vb₁ and Vb₂ are pure DC supplies, they are **AC ground**. The body of M₁ is tied to VDD and the body of M₂ is tied to ground, so **there is no body effect** (VSB = 0 for both).\n\n---\n\n## 1. DC Analysis (Operating Point)\n\nUse the square-law model (saturation region):\n\n**M₁ (PMOS)**\n\\[\nI_{D1}= \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1\n\\Bigl[V_{DD}-V_{b2}-|V_{thp}|\\Bigr]^2\n\\Bigl[1+\\lambda_p(V_{DD}-V_{out})\\Bigr]\n\\]\n\n**M₂ (NMOS)**\n\\[\nI_{D2}= \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\Bigl[V_{in}-V_{thn}\\Bigr]^2\n\\Bigl[1+\\lambda_n V_{out}\\Bigr],\\qquad V_{in}>V_{thn}\n\\]\n\nAt DC, \\(I_{D1}=I_{D2}=I_D\\).\n\n### Regions of Operation\n\n| Transistor | Cutoff | Triode (Linear) | Saturation |\n|---|---|---|---|\n| **M₂** | \\(V_{in}<V_{thn}\\) | \\(V_{out}<V_{in}-V_{thn}\\) | \\(V_{out}\\ge V_{in}-V_{thn}\\) |\n| **M₁** | \\(V_{DD}-V_{b2}<|V_{thp}|\\) | \\(V_{out}>V_{b2}+|V_{thp}|\\) | \\(V_{out}\\le V_{b2}+|V_{thp}|\\) |\n\nIf channel-length modulation is ignored (\\(\\lambda=0\\)), \\(I_{D1}=I_0\\) is **constant** (set only by Vb₂). Then \\(V_{in,Q}\\) is fixed:\n\\[\nV_{in,Q}=V_{thn}+\\sqrt{\\frac{k_p}{k_n}}\\Bigl(V_{DD}-V_{b2}-|V_{thp}|\\Bigr)\n\\]\nand \\(V_{out,Q}\\) lies anywhere in the overlap of the two saturation ranges.  \nWith \\(\\lambda\\neq 0\\) the system is fully determined and can be solved numerically for \\(V_{out}(V_{in})\\).\n\n**Protection diode D:**  \nIf \\(|V_{in}|\\) exceeds the diode forward/drop voltage (≈0.7 V for Si, or \\(V_Z\\) for a Zener), D clamps the gate of M₂, protecting the thin gate oxide.\n\n---\n\n## 2. Small-Signal Analysis\n\nReplace all DC sources by AC ground. The small-signal equivalent contains:\n\n* **M₂**: Transconductance \\(g_{m2}\\) and output resistance \\(r_{o2}=1/(\\lambda_n I_D)\\)\n* **M₁**: Only its output resistance \\(r_{o1}=1/(\\lambda_p I_D)\\) (since \\(v_{sg1}=0\\))\n\nThe gate-source voltage of M₂ is \\(v_{gs2}=v_{in}\\).\n\n\\[\ng_{m2}= \\left.\\frac{\\partial I_{D2}}{\\partial V_{GS}}\\right|_Q\n= \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS,Q}-V_{thn})\n= \\frac{2I_D}{V_{GS,Q}-V_{thn}}\n\\]\n\nApplying KCL at \\(v_{out}\\):\n\n\\[\n\\frac{v_{out}}{r_{o1}}+\\frac{v_{out}}{r_{o2}}+g_{m2}v_{in}=0\n\\]\n\n### Voltage Gain\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m2}\\,(r_{o1}\\parallel r_{o2})}\n\\]\n\nIf we substitute \\(r_{o1}\\parallel r_{o2}=1/[(\\lambda_p+\\lambda_n)I_D]\\):\n\n\\[\n|A_v|=\\frac{2}{(V_{GS,Q}-V_{thn})(\\lambda_p+\\lambda_n)}\n\\]\n\nThis is the **intrinsic gain** of the stage.\n\n### Input & Output Impedance\n* **Input resistance:** \\(R_{in}\\approx \\infty\\) (MOSFET gate draws no DC or low-frequency current; the protection diode is reverse-biased for small signals).\n* **Output resistance:** \n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}=\\frac{1}{(\\lambda_p+\\lambda_n)I_D}}\n\\]\n\nIf an external load \\(R_L\\) is connected to Vout, replace \\(R_{out}\\) by \\(R_{out}\\parallel R_L\\).\n\n---\n\n## 3. Summary of Key Results\n\n| Parameter | Expression |\n|---|---|\n| Bias current | \\(I_D = \\frac{1}{2}k_n(V_{in,Q}-V_{thn})^2[1+\\lambda_n V_{out,Q}]\\) |\n| Transconductance | \\(g_{m2}=2I_D/(V_{GS,Q}-V_{thn})\\) |\n| Voltage gain | \\(A_v=-g_{m2}(r_{o1}\\parallel r_{o2})\\) |\n| Input resistance | \\(R_{in}\\to\\infty\\) |\n| Output resistance | \\(R_{out}=r_{o1}\\parallel r_{o2}\\) |\n\n### Physical Interpretation\n* **M₂** converts the input voltage \\(v_{in}\\) into a current \\(g_{m2}v_{in}\\).\n* **M₁** acts as a high-impedance load (\\(r_{o1}\\)), so the current change produces a large voltage swing at Vout.\n* The negative sign indicates **phase inversion** (common-source behavior).\n* The protection diode D does not affect the small-signal gain as long as \\(v_{in}\\) stays within the clamp limits.\n\nThus, the circuit functions as a **high-gain inverting voltage amplifier** whose DC operating point is set by the bias supplies Vb₁ and Vb₂ and whose AC performance is governed by the transconductance of M₂ and the parallel output resistances of M₁ and M₂.",
        "format": "markdown",
        "sha256": "b6d3366f04b5da6fdf67795fc4d1258b499d4aa49091615c64edfcb0d8efbac9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and treats the circuit as an inverting common-source stage. In the figure, Vin is applied at M2’s source, making it a non-inverting common-gate stage with low input resistance; this topology error contradicts the essential answer.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14305,
        "total_tokens": 16410,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14305,
        "total_tokens": 16410,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\nThe circuit contains  \n\n* **M₁** – PMOS transistor (source at VDD, gate at the bias voltage Vb₂, drain at Vout)  \n* **M₂** – NMOS transistor (drain at Vout, gate at Vin, source at the bias node Vb₁)  \n* **D** – a forward‑biased diode (or diode‑connected device) between Vin and Vb₁  \n* DC bias sources: VDD, Vb₁, Vb₂  \n* Signal input: Vin (AC ground for the bias sources)\n\nSo the topology is a **common‑source (CS) stage** with an **active load** (M₁) and a **diode‑stabilized source/gate bias** for M₂.\n\n---\n\n## 1. DC analysis (quiescent point)\n\nSet all AC signals to zero and treat Vin as a DC value V_IN.\n\n### 1.1 Currents in M₁ and M₂\nAssume both transistors are in saturation (the conditions are checked below).\n\nFor M₁ (PMOS):\n\\[\nI_{D1}= \\frac12 k_p\\!\\left(\\frac{W}{L}\\right)_{\\!1}\\!\\bigl(V_{SG1}-|V_{thp}|\\bigr)^2\\bigl(1+\\lambda_p V_{SD1}\\bigr)\n\\]\nwith  \n\\(V_{SG1}=V_{DD}-V_{b2}\\) and \\(V_{SD1}=V_{DD}-V_{out}\\).\n\nFor M₂ (NMOS):\n\\[\nI_{D2}= \\frac12 k_n\\!\\left(\\frac{W}{L}\\right)_{\\!2}\\!\\bigl(V_{GS2}-V_{thn}\\bigr)^2\\bigl(1+\\lambda_n V_{DS2}\\bigr)\n\\]\nwith  \n\\(V_{GS2}=V_{IN}-V_{b1}\\) and \\(V_{DS2}=V_{out}-V_{b1}\\).\n\nBecause the collectors/drains are tied together and there is no other DC path at Vout,\n\\[\nI_{D1}=I_{D2}\\equiv I .\n\\]\n\n### 1.2 Role of the diode D\nThe diode is in parallel with the gate–source junction of M₂, so\n\\[\nV_{GS2}=V_D \\approx V_T\\ln\\!\\left(\\frac{I}{I_S}+1\\right)\\;\\;(\\approx 0.6\\!-\\!0.7\\;\\text{V})\n\\]\nand therefore\n\\[\n\\boxed{V_{b1}=V_{IN}-V_D } .\n\\]\n\nThe diode carries essentially the emitter/source current of M₂:\n\\[\nI_D \\approx I_{S}\\,e^{V_D/V_T}\\; \\Rightarrow\\; I_D\\approx \\frac{\\beta_2+1}{\\beta_2}I\n\\quad\\text{(BJT analog)},\n\\]\nor, for MOSFETs, \\(I_D\\approx I\\).\n\nThus **the quiescent current I is fixed almost entirely by M₁** (through Vb₂ and VDD), while Vb₁ tracks Vin with a constant offset V_D.\n\n### 1.3 Output voltage\nFrom M₂:\n\\[\nV_{out}=V_{b1}+V_{DS2}=V_{IN}-V_D+V_{DS2}.\n\\]\n\nIf channel‑length modulation is ignored (\\(\\lambda=0\\)), \\(V_{DS2}\\) is free in saturation, so Vout is determined only by the load connected to the node. With the Early effect included (\\(\\lambda\\neq0\\)), solving \\(I_{D1}=I_{D2}\\) gives a unique Vout:\n\\[\nV_{out}\\approx \\frac{V_{DD}/V_{A1}+V_{b1}/V_{A2}}{1/V_{A1}+1/V_{A2}} .\n\\]\n\n### 1.4 Region‑of‑operation conditions\n| Transistor | Saturation (active) condition | Cut‑off / Triode |\n|---|---|---|\n| **M₁** | \\(V_{SD1}>V_{SG1}-|V_{thp}|\\;\\Rightarrow\\;V_{out}<V_{b2}+|V_{thp}|\\) | \\(V_{out}>V_{b2}+|V_{thp}|\\) (triode) |\n| **M₂** | \\(V_{DS2}>V_{GS2}-V_{thn}\\;\\Rightarrow\\;V_{out}>V_{IN}-V_{thn}\\) | \\(V_{GS2}<V_{thn}\\) (cut‑off) or \\(V_{DS2}<V_{ov2}\\) (triode) |\n\nIf both are saturated, the stage behaves as a **current source** of value I feeding the output node.\n\n---\n\n## 2. Small‑signal (AC) analysis\n\nFor AC, all DC supplies are ground: \\(v_{DD}=v_{b1}=v_{b2}=0\\). The source/emitter of M₂ is therefore at AC ground.\n\n### 2.1 Small‑signal model\n* **M₁**: only its output resistance is present\n  \\[\n  r_{o1}=\\frac{1}{\\lambda_p I}\\quad\\text{(BJT: }r_{o1}=V_{A1}/I\\text{)}\n  \\]\n  connected between Vout and ground.\n\n* **M₂**: transconductance and output resistance\n  \\[\n  g_{m2}= \\frac{\\partial I_{D2}}{\\partial V_{GS2}}\\Big|_Q\n  =\\begin{cases}\n  \\displaystyle\\frac{I}{V_T} & \\text{(BJT)}\\\\[6pt]\n  \\displaystyle\\frac{2I}{V_{ov2}} & \\text{(MOSFET)}\n  \\end{cases}\n  \\]\n  \\[\n  r_{o2}=\\frac{1}{\\lambda_n I}\\quad\\text{(BJT: }r_{o2}=V_{A2}/I\\text{)}\n  \\]\n  between drain/collector and source/emitter (ground).\n\n* **Diode D**: dynamic resistance\n  \\[\n  r_d = \\frac{nV_T}{I}\\approx \\frac{V_T}{I}\\quad (n\\approx1).\n  \\]\n  It is in parallel with the input impedance of M₂.\n\n* **M₂ input impedance** (BJT only):\n  \\[\n  r_{\\pi 2}=\\frac{\\beta_2}{g_{m2}} .\n  \\]\n  For a MOSFET the gate is open‑circuit (\\(R_{in}\\to\\infty\\) except for \\(r_d\\)).\n\n### 2.2 Nodal equations\nAt the output node:\n\\[\nv_{out}\\left(\\frac1{r_{o1}}+\\frac1{r_{o2}}\\right) + g_{m2}v_{gs}=0 .\n\\]\n\nAt the input (base/gate):\n\\[\nv_{gs}=v_{in}-v_{e}=v_{in}\\quad (v_e=0).\n\\]\n\nBut the diode draws current, so the **total input resistance** is\n\\[\n\\boxed{R_{in}=r_{\\pi 2}\\parallel r_d \\;\\;(\\text{BJT})\\quad\\text{or}\\quad R_{in}\\approx r_d \\;\\;(\\text{MOSFET}) } .\n\\]\n\nIf the driving source is ideal (\\(R_s=0\\)), then \\(v_{gs}=v_{in}\\).\n\n### 2.3 Voltage gain\n\\[\nv_{out}=-g_{m2}v_{in}\\,(r_{o1}\\parallel r_{o2})\n\\]\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m2}\\,(r_{o1}\\parallel r_{o2}) } .\n\\]\n\n*If \\(\\lambda=0\\) (\\(r_{o1},r_{o2}\\to\\infty\\)), the gain is infinite (ideal current‑source load). In practice*\n\\[\n|A_v|\\approx g_{m2}\\frac{V_{A1}\\parallel V_{A2}}{I}.\n\\]\n\n### 2.4 Input and output resistances\n\\[\n\\boxed{R_{in}=r_{\\pi 2}\\parallel r_d \\;\\;(\\text{BJT})\\;\\; \\text{or}\\;\\; R_{in}\\approx r_d \\;\\;(\\text{MOSFET})}\n\\]\n\n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}} .\n\\]\n\n---\n\n## 3. Summary of circuit behavior\n\n| Feature | Expression / Value |\n|---|---|\n| **Quiescent current** | Set by M₁: \\(I\\approx \\frac12 k_p(V_{DD}-V_{b2}-|V_{thp}|)^2\\) |\n| **Bias of M₂** | \\(V_{GS2}=V_{BE2}\\approx V_D\\approx 0.7\\) V; \\(V_{b1}=V_{IN}-V_D\\) |\n| **DC transfer** | \\(V_{out}\\approx V_{IN}-V_D+V_{DS2}\\) (tracks Vin with slope ≈ 1) |\n| **AC voltage gain** | \\(A_v=-g_{m2}(r_{o1}\\parallel r_{o2})\\) |\n| **Input resistance** | \\(R_{in}\\approx r_d\\) (MOSFET) or \\(r_{\\pi2}\\parallel r_d\\) (BJT) |\n| **Output resistance** | \\(R_{out}=r_{o1}\\parallel r_{o2}\\) |\n| **Function** | Common‑source/common‑emitter amplifier with active load; the diode provides temperature‑compensated bias for M₂ and sets its quiescent point. |\n\n### Key design points\n1. **M₁** acts as a constant current load, giving the stage a high intrinsic gain.\n2. **D** stabilizes \\(V_{GS2}\\) (or \\(V_{BE2}\\)) against temperature and supply variations.\n3. Because the source/emitter of M₂ is tied to the AC‑ground bias source Vb₁, there is **no source/emitter degeneration**; the full \\(g_{m2}\\) is available for amplification.\n4. The circuit is suitable as a **gain stage** or **level shifter** (Vout ≈ Vin + constant offset).\n\nIf specific numerical values for \\(V_{DD}, V_{b1}, V_{b2}, k', V_{th}, \\beta, I_S\\) are given, substitute them into the equations above to obtain the exact operating point and gain.",
        "format": "markdown",
        "sha256": "1fb2ed13a181b33e5c7cce01f81caf09dfdcb474c1fd0278c950f70088a5c1e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and calls the circuit common-source, whereas the essential topology is common-gate with Vin at M2’s source. Its gain polarity and input-resistance analysis therefore contradict the circuit.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 31516,
        "total_tokens": 33621,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 31516,
        "total_tokens": 33621,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit contains **5 capacitors**:\n\n- \\(C_{GS}\\) (gate–source of \\(M_1\\))\n- \\(C_{GD}\\) (gate–drain of \\(M_1\\))\n- \\(C_{DB}\\) (drain–bulk of \\(M_1\\))\n- \\(C_{GD2}\\) (gate–drain of \\(M_2\\))\n- \\(C_{DB2}\\) (drain–bulk of \\(M_2\\))\n\nThese are connected among **four independent AC nodes** (excluding ground and the input source):\n\n1. Gate of \\(M_1\\) (\\(V_{g1}\\))\n2. Output node \\(V_{out}\\) (drain of \\(M_1\\) / source of \\(M_2\\))\n3. Gate of \\(M_2\\) (\\(V_{g2}\\))\n4. Drain of \\(M_2\\) (\\(V_{d2}\\))\n\nCounting the loops formed **only** by capacitors (and ground), there is exactly **one independent loop**:\n\\[\nC_{GS} \\rightarrow C_{GD} \\rightarrow C_{DB} \\rightarrow \\text{ground} \\rightarrow C_{GS}\n\\]\n\nSo the number of independent energy-storage elements is:\n\\[\n5 \\text{ capacitors} - 1 \\text{ loop} = 4\n\\]\n\nSince there are no inductors and no other dependencies, the order of the system (the denominator degree of the transfer function) equals the number of independent capacitors.\n\n\\[\n\\boxed{4}\n\\]\n\nThus the circuit has **four poles**.",
        "format": "markdown",
        "sha256": "815bdd583b08c39e16dbc5864b2588b50b05a82e3e41477691e6c890ce0014b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the wrong pole count and misidentifies M2's connections, inventing independent gate and drain nodes. It does correctly name several M1 capacitances and recognize their loop, but the circuit topology and conclusion are fundamentally wrong.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 25045,
        "total_tokens": 27362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 25045,
        "total_tokens": 27362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the small-signal equivalent circuit, count the independent energy-storage elements (capacitors) and apply the loop/cut-set rules:\n\n**Capacitors present**\n- \\(C_{GS}\\) : gate–source of \\(M_1\\)\n- \\(C_{GD}\\) : gate–drain of \\(M_1\\)\n- \\(C_{DB}\\) : drain–bulk of \\(M_1\\)\n- \\(C_{GD2}\\) : gate–drain of \\(M_2\\)\n- \\(C_{DB2}\\) : drain–bulk of \\(M_2\\)\n\nThat is 5 capacitors in total.\n\n**Reductions**\n1. **Parallel pair:** The gate of \\(M_2\\) is AC-grounded (bias source), so \\(C_{GD2}\\) and \\(C_{DB2}\\) both connect the drain of \\(M_2\\) to ground. They combine into one equivalent capacitance → **–1**.\n2. **Capacitor loop:** \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) form a loop among the gate and drain of \\(M_1\\) and ground with no voltage source inside. This loop involves only two independent nodes (gate of \\(M_1\\) and drain of \\(M_1\\)) → **–1**.\n\nSo the number of independent state variables (node voltages) is:\n\\[\n5 - 1 - 1 = 3\n\\]\n\nThe three independent nodes are:\n- Gate of \\(M_1\\)\n- Drain of \\(M_1\\) / source of \\(M_2\\) (\\(V_{out}\\))\n- Drain of \\(M_2\\)\n\nHence the transfer function has **three poles** (one at the input, one at the intermediate node, and one at the drain of \\(M_2\\)).\n\n\\[\n\\boxed{3}\n\\]",
        "format": "markdown",
        "sha256": "709f5d04f91f928d2487aa838647b6fd80895f766b64bf48decc667b5d590d78"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives three poles by treating M2's drain as a separate node, although it is the same output node as M1's drain. The circuit has only two independent capacitor-node voltages; the answer shows some relevant capacitor reasoning but reaches the wrong pole count.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 19103,
        "total_tokens": 21420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 19103,
        "total_tokens": 21420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the small-signal equivalent, replace all DC supplies by AC ground and identify the energy-storage elements:\n\n- **C_GS** – gate-source of M₁ (node 1 → ground)  \n- **C_GD** – gate-drain of M₁ (node 1 ↔ output node 3)  \n- **C_DB** – drain-bulk of M₁ (node 3 → ground)  \n- **C_GD2** – gate-drain of M₂ (gate is at AC ground or tied to node 1, drain is at node 3)  \n- **C_DB2** – drain-bulk of M₂ (node 3 → ground, since M₂’s source/bulk is at VDD = AC ground)\n\nSo all five capacitors are distributed between only **two independent AC nodes**:\n1. The input/gate node (V_in side, after R_S)\n2. The output node V_out (the common drain node of M₁ and M₂)\n\nThere are no floating capacitor loops that do not include ground, and the source of M₁ is ground while the source of M₂ is at the AC-ground supply. Hence the state-space is second-order.\n\nThe resistor R_S is in series with the input source and does not add an extra state.\n\nTherefore the transfer function has a denominator of degree **2**.\n\n**Answer: The circuit has 2 poles.**  \n\n(The two poles are typically the dominant pole at the output node and the non-dominant pole at the input node, formed by R_S with the total input capacitance and by R_out with the total output capacitance, respectively.)",
        "format": "markdown",
        "sha256": "d29d14798e23e0c6406d50b33745f5fe02184ec8c847b4ef389d509a9d6dc94f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes there are two poles and identifies the gate and output as the two nodes, but incorrectly suggests M2’s gate could be tied to the input node; it is at AC ground.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 29518,
        "total_tokens": 31835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 29518,
        "total_tokens": 31835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **stacked (tandem) NMOS common‑source stage** with a resistive load:\n\n* **M₁** – NMOS, source grounded, gate driven by $V_{\\mathrm{in}}$, drain at node $V_X$.\n* **M₂** – NMOS, source at $V_X$, drain at $V_{\\mathrm{out}}$, gate also driven by $V_{\\mathrm{in}}$.\n* **R_D** – load resistor connected between the supply $V_{DD}$ and $V_{\\mathrm{out}}$.\n* Both transistors have their bodies tied to ground (p‑substrate), so **M₂ experiences the body effect**:  \n  $V_{SB2}=V_X>0 \\;\\Rightarrow\\; V_{th2}>V_{th1}$.\n\nThe current $I_D$ is the same through M₁, M₂ and R_D (ignoring gate currents).\n\n---\n\n## 1. DC Analysis (Transfer Characteristic $V_{\\mathrm{out}}$ vs. $V_{\\mathrm{in}}$)\n\nDefine $k_i=\\mu_n C_{ox}(W/L)_i$ and $\\lambda_i$ (channel‑length modulation).\n\n### Operating Regions\n\n| Region | Condition on $V_{\\mathrm{in}}$ | State of M₁ | State of M₂ |\n|--------|------------------------------|--------------|--------------|\n| **I**  | $V_{\\mathrm{in}}<V_{th1}$ | Cutoff ($I_D\\approx0$) | Cutoff ($V_{GS2}<V_{th2}$) |\n| **II** | $V_{\\mathrm{in}}>V_{th1}$ and $V_{\\mathrm{in}}-V_X>V_{th2}$ | On (triode or sat.) | On (triode or sat.) |\n\nBecause KCL forces $I_{D1}=I_{D2}=I_D$, in steady state either **both are off** ($I_D=0$) or **both are on**.\n\n### Region I – Both Off\n$$I_D=0 \\;\\Rightarrow\\; V_{\\mathrm{out}}=V_{DD},\\qquad V_X\\approx V_{DD}$$\n\n### Region II – Both On\nWrite the current equations (ignoring $\\lambda$ for simplicity):\n\n**M₁** (source at 0):\n$$\nI_D=\n\\begin{cases}\nk_1\\big[(V_{\\mathrm{in}}-V_{th1})V_X-\\tfrac12V_X^2\\big], & V_X<V_{\\mathrm{in}}-V_{th1}\\;\\;(\\text{triode})\\\\[4pt]\n\\frac12 k_1(V_{\\mathrm{in}}-V_{th1})^2, & V_X\\ge V_{\\mathrm{in}}-V_{th1}\\;\\;(\\text{sat.})\n\\end{cases}\n$$\n\n**M₂** (source at $V_X$, drain at $V_{\\mathrm{out}}$):\nWith body effect\n$$V_{th2}=V_{th0}+\\gamma\\Bigl(\\sqrt{2\\phi_f+V_X}-\\sqrt{2\\phi_f}\\Bigr)$$\n$$\nI_D=\n\\begin{cases}\nk_2\\big[(V_{\\mathrm{in}}-V_X-V_{th2})(V_{\\mathrm{out}}-V_X)-\\tfrac12(V_{\\mathrm{out}}-V_X)^2\\big], & V_{\\mathrm{out}}-V_X<V_{GS2}-V_{th2}\\\\[4pt]\n\\frac12 k_2(V_{\\mathrm{in}}-V_X-V_{th2})^2, & \\text{otherwise (sat.)}\n\\end{cases}\n$$\n\n**KVL through R_D:**\n$$V_{\\mathrm{out}} = V_{DD}-I_D R_D$$\n\nThese three equations determine $I_D$, $V_X$ and $V_{\\mathrm{out}}$ for a given $V_{\\mathrm{in}}$.  \nBecause $V_{th2}>V_{th1}$, M₂ requires a larger gate drive to carry the same current; consequently $V_X$ is pulled lower than it would be without the body effect, reducing $I_D$ for a given $V_{\\mathrm{in}}$.\n\n---\n\n## 2. Small‑Signal Analysis\n\nLinearize around the DC bias point $(I_D,V_X,V_{\\mathrm{out}})$. Define:\n$$g_{m1}=\\frac{\\partial I_{D1}}{\\partial V_{GS1}},\\quad g_{m2}=\\frac{\\partial I_{D2}}{\\partial V_{GS2}},\\quad g_{mb2}=\\frac{\\gamma g_{m2}}{2\\sqrt{2\\phi_f+V_{SB}}}$$\nand $r_{o1}=1/(\\lambda_1 I_D)$, $r_{o2}=1/(\\lambda_2 I_D)$.\n\nThe small‑signal equivalent (with $v_{\\mathrm{in}}$ applied to both gates) gives two nodal equations at $v_x$ and $v_{\\mathrm{out}}$.\n\n### Voltage Gain $A_v = v_{\\mathrm{out}}/v_{\\mathrm{in}}$\n\nSolving the nodal system (see derivation below) yields the **exact** gain:\n$$\nA_v=\n\\frac{\\displaystyle\\Bigl(1+\\frac{g_{m2}+g_{mb2}}{1/r_{o2}}\\Bigr)\\frac{g_{m2}-g_{m1}}{G_X}-g_{m2}}\n{\\displaystyle\\frac{1}{R_D}+\\frac{1}{r_{o2}}-\\frac{G_S}{r_{o2}G_X}}\n$$\nwhere $G_S=1/r_{o2}+g_{m2}+g_{mb2}$ and $G_X=G_S+1/r_{o1}$.\n\nIn the practical case $\\lambda_1,\\lambda_2\\to0$ ($r_{o1},r_{o2}\\to\\infty$) this collapses to the remarkably simple result:\n$$\\boxed{A_v \\approx -g_{m1}R_D}$$\n\n**Interpretation:** Although M₂ is in the signal path, its gate moves with $v_{\\mathrm{in}}$ exactly in a way that cancels its own transconductance contribution to the output current. The total current change is therefore set solely by M₁, and the voltage drop across $R_D$ is $\\Delta V_{\\mathrm{out}}\\approx -g_{m1}v_{\\mathrm{in}}R_D$.\n\nIf $r_{o1},r_{o2}$ are finite, the correction factor is of order $1/[(g_{m2}+g_{mb2})r_{o1}]$; the gain is slightly reduced in magnitude.\n\n### Output Resistance $R_{\\mathrm{out}}$ (looking into $V_{\\mathrm{out}}$ with $v_{\\mathrm{in}}=0$)\n\nWith $v_{\\mathrm{in}}=0$ the gate of M₂ is at AC ground, so M₂ acts as a **cascode** device. The transistor‑only output resistance is:\n$$\\boxed{R_{\\mathrm{out,trans}} \\approx r_{o2}\\Bigl[1+(g_{m2}+g_{mb2})r_{o1}\\Bigr]}$$\nThe total resistance seen at the output node is\n$$R_{\\mathrm{out}} = R_D \\;\\|\\; r_{o2}\\Bigl[1+(g_{m2}+g_{mb2})r_{o1}\\Bigr]$$\n\n### Input Resistance\nThe gates are oxide‑isolated:\n$$\\boxed{R_{\\mathrm{in}} \\approx \\infty}$$\n\n---\n\n## 3. Key Physical Insights\n\n1. **Body Effect:** Because $V_{SB2}=V_X>0$, $V_{th2}>V_{th1}$. For the same $V_{GS}=V_{\\mathrm{in}}$, M₂ carries less current than M₁ would if placed in M₁’s position. This lowers $I_D$ and raises $V_{\\mathrm{out}}$ compared with a stack of two identical transistors without body effect.\n\n2. **Gain:** Despite the stacked transistor, the small‑signal voltage gain is essentially that of a single common‑source stage ($-g_{m1}R_D$). The second transistor mainly boosts the **output resistance** (cascode action) without contributing to the forward gain because its gate tracks the input.\n\n3. **DC Bias:** To keep both devices in saturation (the usual analog design goal), one must choose $V_{\\mathrm{in}}$ such that\n   $$V_X \\ge V_{\\mathrm{in}}-V_{th1} \\quad\\text{and}\\quad V_{\\mathrm{out}}-V_X \\ge V_{\\mathrm{in}}-V_X-V_{th2}.$$\n\n---\n\n### Summary of Results\n\n| Parameter | Expression (approx.) |\n|-----------|----------------------|\n| DC current (sat.) | $I_D \\approx \\frac12 k_1(V_{\\mathrm{in}}-V_{th1})^2 \\approx \\frac12 k_2(V_{\\mathrm{in}}-V_X-V_{th2})^2$ |\n| Output voltage | $V_{\\mathrm{out}} = V_{DD}-I_D R_D$ |\n| Small‑signal gain | $A_v \\approx -g_{m1}R_D$ |\n| Output resistance | $R_{\\mathrm{out}} \\approx R_D \\parallel \\bigl[r_{o2}(1+(g_{m2}+g_{mb2})r_{o1})\\bigr]$ |\n| Input resistance | $R_{\\mathrm{in}}\\approx \\infty$ |\n\nThus the circuit behaves as a **high‑gain, high‑output‑resistance amplifier** whose forward gain is set by the bottom transistor M₁ and the load resistor R_D, while the top transistor M₂ provides cascode‑like output impedance and introduces the body‑effect threshold shift $V_{th2}(V_X)$.",
        "format": "markdown",
        "sha256": "bd9a70cc2fcdcdbcdb0ed72870b1c194d4c5752b5c0fc8a5cb12eacef3000836"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It identifies the stacked NMOS connections but treats the circuit as a true cascode, asserting both devices can be saturated and that M₂ boosts output resistance. The essential behavior is M₁ in triode with M₂ saturated, making the pair approximately one NMOS with a longer effective channel; that mechanism is missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 33735,
        "total_tokens": 35944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 33735,
        "total_tokens": 35944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit consists of:\n\n* Supply voltage $V_{DD}$\n* Load resistor $R_D$ connected between $V_{DD}$ and the output node $V_{out}$\n* Two n‑channel MOSFETs $M_1$ and $M_2$ stacked in series between $V_{out}$ and ground\n  * $M_1$: source $\\to$ ground, drain $\\to$ node $V_X$ (the intermediate node)\n  * $M_2$: source $\\to$ $V_X$, drain $\\to$ $V_{out}$\n* Input voltage $V_{in}$ applied **to the gates of both $M_1$ and $M_2$**\n* Output taken at $V_{out}$\n\nSo the current path is  \n$$V_{DD}\\;\\xrightarrow{R_D}\\;V_{out}\\;\\xrightarrow{M_2}\\;V_X\\;\\xrightarrow{M_1}\\;\\text{GND}$$\n\nWe assume the standard square‑law MOSFET model (ignoring body effect unless noted) with parameters $(k_1,V_{th1})$ for $M_1$ and $(k_2,V_{th2})$ for $M_2$, and channel‑length modulation parameters $\\lambda_1,\\lambda_2$.\n\n---\n\n## 1. DC Analysis (Transfer Characteristic $V_{out}$ vs. $V_{in}$)\n\nBecause $M_1$ and $M_2$ are in series, they carry the same drain current $I_D$.\n\n### 1.1 $M_1$ (source at ground, $V_{GS1}=V_{in}$)\n\n| Region | Condition | Current $I_D$ |\n|--------|-----------|---------------|\n| **Cutoff** | $V_{in}\\le V_{th1}$ | $I_D=0$ |\n| **Triode** | $V_{X}<V_{in}-V_{th1}$ | $I_D=k_1\\Big[(V_{in}-V_{th1})V_X-\\frac{1}{2}V_X^2\\Big]\\big(1+\\lambda_1 V_X\\big)$ |\n| **Saturation** | $V_{X}\\ge V_{in}-V_{th1}$ | $I_D=\\frac{1}{2}k_1(V_{in}-V_{th1})^2\\big(1+\\lambda_1 V_X\\big)$ |\n\n### 1.2 $M_2$ (source at $V_X$, gate at $V_{in}\\;\\Rightarrow\\;V_{GS2}=V_{in}-V_X$)\n\n| Region | Condition | Current $I_D$ |\n|--------|-----------|---------------|\n| **Cutoff** | $V_{in}-V_X\\le V_{th2}$ | $I_D=0$ |\n| **Triode** | $V_{out}-V_X<V_{in}-V_X-V_{th2}\\;\\Rightarrow\\;V_{out}<V_{in}-V_{th2}$ | $I_D=k_2\\Big[(V_{in}-V_X-V_{th2})(V_{out}-V_X)-\\frac{1}{2}(V_{out}-V_X)^2\\Big]\\big(1+\\lambda_2(V_{out}-V_X)\\big)$ |\n| **Saturation** | $V_{out}\\ge V_{in}-V_{th2}$ | $I_D=\\frac{1}{2}k_2(V_{in}-V_X-V_{th2})^2\\big(1+\\lambda_2(V_{out}-V_X)\\big)$ |\n\n### 1.3 KVL (load line)\n\n$$V_{out}=V_{DD}-I_D R_D$$\n\n### 1.4 Solving for the operating point\n\nSet $I_{D1}=I_{D2}=I_D$ together with $V_{out}=V_{DD}-I_D R_D$.  \nThis gives a system of two equations in the unknowns $V_X$ and $I_D$ (or $V_{out}$) for each combination of regions.\n\n**Typical qualitative behavior (enhancement devices, $\\lambda=0$):**\n\n* **$V_{in}<V_{th1}$**: $M_1$ is off $\\Rightarrow I_D=0 \\Rightarrow \\boxed{V_{out}=V_{DD}}$.\n* **$V_{in}>V_{th1}$**: Both devices can conduct. The current is limited mainly by $M_1$ (the bottom device with the smaller $V_{GS}$). As $V_{in}$ increases, $I_D$ grows and $V_{out}$ falls according to $V_{out}=V_{DD}-I_D R_D$.\n\nIf $M_1$ and $M_2$ are identical ($k_1=k_2=k$, $V_{th1}=V_{th2}=V_{th}$) and both are in saturation, solving $I_{D1}=I_{D2}$ yields $V_X=0$ or $V_X=2(V_{in}-V_{th})$. The physically valid solution ($V_X>0$) forces one transistor into triode, so in practice the pair behaves like a **single transistor with an effective transconductance reduced by the stacking**.\n\n---\n\n## 2. Small‑Signal AC Analysis\n\nReplace DC sources by AC ground ($V_{DD}\\to 0$). Apply a small signal $v_{in}$.\n\n### 2.1 Small‑signal model\n\n* $M_1$: $v_{gs1}=v_{in}-0=v_{in}$, $v_{ds1}=v_x$\n  $$i_{d1}=g_{m1}v_{in}+\\frac{v_x}{r_{o1}}$$\n* $M_2$: $v_{gs2}=v_{in}-v_x$, $v_{ds2}=v_{out}-v_x$\n  $$i_{d2}=g_{m2}(v_{in}-v_x)+\\frac{v_{out}-v_x}{r_{o2}}$$\n\nBecause they are in series: $i_{d1}=i_{d2}=i$.\n\n### 2.2 Nodal equations\n\n**At $v_{out}$ (KCL):**\n$$\\frac{v_{out}}{R_D}+i_{d2}=0\n\\;\\Rightarrow\\;\n\\frac{v_{out}}{R_D}+g_{m2}(v_{in}-v_x)+\\frac{v_{out}-v_x}{r_{o2}}=0$$\n\n**At $v_x$ (current equality $i_{d1}=i_{d2}$):**\n$$g_{m1}v_{in}+\\frac{v_x}{r_{o1}}=g_{m2}(v_{in}-v_x)+\\frac{v_{out}-v_x}{r_{o2}}$$\n\n### 2.3 Voltage gain $A_v=v_{out}/v_{in}$\n\nSolving the two linear equations (for $\\lambda_1=\\lambda_2=0\\;\\Rightarrow\\;r_{o1}=r_{o2}=\\infty$) gives the remarkably simple result:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1}R_D}$$\n\nwhere $g_{m1}=k_1(V_{GS1,Q}-V_{th1})=k_1(V_{in,Q}-V_{th1})$ (in saturation).\n\nIf channel‑length modulation is included ($r_{o1},r_{o2}$ finite), the exact gain is\n\n$$\\boxed{A_v = -\\frac{g_{m1}}{\\displaystyle\\frac{1}{R_D}+\\frac{1}{r_{o1}}+\\frac{r_{o2}}{R_D\\,r_{o1}}}\n= -g_{m1}R_D\\;\\frac{1}{1+\\dfrac{R_D}{r_{o1}}+\\dfrac{r_{o2}}{r_{o1}}}}$$\n\nFor $R_D\\ll r_{o1},r_{o2}$ this reduces to $A_v\\approx -g_{m1}R_D/2$ when $r_{o1}\\approx r_{o2}$, but the dominant term is always proportional to $-g_{m1}R_D$.\n\n### 2.4 Input and output resistances\n\n* **Input resistance:** The gate draws only leakage current.\n  $$\\boxed{R_{in}\\approx \\infty}$$\n* **Output resistance:** Looking into $V_{out}$ with $v_{in}=0$:\n  $$R_{out}=R_D \\parallel \\Big[r_{o2}\\Big(1+g_{m2}r_{o1}\\Big)+r_{o1}\\Big] \\;\\approx\\; R_D \\parallel \\big[r_{o2}(1+g_{m2}r_{o1})\\big]$$\n  If $\\lambda=0$ ($r_o\\to\\infty$), then $\\boxed{R_{out}=R_D}$.\n\n---\n\n## 3. Summary of Key Results\n\n| Quantity | Expression / Value |\n|----------|-------------------|\n| **DC load line** | $V_{out}=V_{DD}-I_D R_D$ |\n| **Cutoff ($V_{in}<V_{th1}$)** | $V_{out}=V_{DD}$ |\n| **Small‑signal gain** | $A_v \\approx -g_{m1}R_D$ |\n| **Input resistance** | $R_{in}\\to\\infty$ |\n| **Output resistance** | $R_{out}\\approx R_D \\parallel [r_{o2}(1+g_{m2}r_{o1})]$ |\n\n**Physical interpretation:** The bottom transistor $M_1$ acts as the **gain element** (common‑source stage), while $M_2$ serves as a **stacked (cascode‑like) device** that shares the current but, because its gate is driven by the same $v_{in}$, its transconductance contribution cancels in the gain expression, leaving $M_1$ to determine the amplification. The resistor $R_D$ sets the load and therefore the gain magnitude $|A_v|\\approx g_{m1}R_D$.",
        "format": "markdown",
        "sha256": "abe883537cf6581534c66fc157dc2a45f37190a15a1175c9477b009dc71e2bdb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the series NMOS pair with common gate drive and notes that both devices cannot be saturated, but it ultimately treats the circuit as a cascode-like gain stage and misses the key result: the lower device is in triode and the pair behaves approximately like one transistor with effective channel length L1 + L2. Its gain and output-resistance analysis follows the wrong mechanism.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 29812,
        "total_tokens": 32021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 29812,
        "total_tokens": 32021,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit consists of:\n\n* A pull‑up resistor **R_D** connected between the supply **V_DD** and the output node **V_out**.\n* Two n‑channel enhancement MOSFETs **M₁** and **M₂** stacked in series between **V_out** and ground.\n* The gate of **M₁** is driven by the input **V_in**.\n* The gate of **M₂** is also tied to **V_in** (the line runs up from the input node to the gate of M₂).\n* The intermediate node between M₂ and M₁ is called **V_X**.\n\nSo the topology is a **resistive‑load inverter with a stacked (series) NMOS pull‑down network**.\n\nBelow is a complete DC and small‑signal analysis.  \nWe denote the transistor parameters by  \n\\(k_i=\\frac{1}{2}\\mu_n C_{ox}(W/L)_i\\) and threshold voltage \\(V_{TH}\\) (assumed equal for both devices, \\(V_{TH1}=V_{TH2}=V_{TH}\\)), and include channel‑length modulation \\(\\lambda\\) where noted.\n\n---\n\n## 1. DC Transfer Characteristic  \\(V_{out}(V_{in})\\)\n\nLet \\(V_X\\) be the voltage at the source of M₂ / drain of M₁.\n\n| Region | Condition on \\(V_{in}\\) | State of M₁ | State of M₂ | Result |\n|--------|------------------------|--------------|-------------|--------|\n| **I** (Cutoff) | \\(V_{in}<V_{TH}\\) | Cutoff (\\(I_D=0\\)) | Cutoff (\\(V_{GS2}=V_{in}-V_X<V_{TH}\\)) | \\(I_D=0\\Rightarrow \\boxed{V_{out}=V_{DD}}\\) |\n| **II** (Active) | \\(V_{in}>V_{TH}\\) | On (triode or saturation) | On (triode or saturation) | Solve coupled equations below |\n\nBecause the devices are in series, \\(I_{D1}=I_{D2}=I_D\\) and\n\\[\nV_{out}=V_{DD}-I_D R_D .\n\\]\n\n### Operating equations in Region II\n\n**M₁** (\\(V_{GS1}=V_{in},\\;V_{DS1}=V_X\\)):\n\\[\nI_D=\n\\begin{cases}\nk_1\\big[(V_{in}-V_{TH})V_X-\\tfrac{1}{2}V_X^2\\big], & V_X<V_{in}-V_{TH}\\;\\;(\\text{triode})\\\\[4pt]\nk_1(V_{in}-V_{TH})^2\\big[1+\\lambda V_X\\big], & V_X\\ge V_{in}-V_{TH}\\;\\;(\\text{sat.})\n\\end{cases}\n\\]\n\n**M₂** (\\(V_{GS2}=V_{in}-V_X,\\;V_{DS2}=V_{out}-V_X\\)):\n\\[\nI_D=\n\\begin{cases}\nk_2\\big[(V_{in}-V_X-V_{TH})(V_{out}-V_X)-\\tfrac{1}{2}(V_{out}-V_X)^2\\big], & V_{out}<V_{in}-V_{TH}\\;\\;(\\text{triode})\\\\[4pt]\nk_2(V_{in}-V_X-V_{TH})^2\\big[1+\\lambda(V_{out}-V_X)\\big], & V_{out}\\ge V_{in}-V_{TH}\\;\\;(\\text{sat.})\n\\end{cases}\n\\]\n\nThe system is solved implicitly for \\(V_X\\) and \\(V_{out}\\) given \\(V_{in}\\).\n\n**Qualitative behavior:**\n* For \\(V_{in}\\lesssim V_{TH}\\): \\(V_{out}\\approx V_{DD}\\).\n* As \\(V_{in}\\) increases past \\(V_{TH}\\), current begins to flow and \\(V_{out}\\) falls.\n* For very large \\(V_{in}\\) both devices are deep in triode and behave like resistances; \\(V_{out}\\) approaches a small value determined by the voltage divider formed by \\(R_D\\) and the on‑resistances of M₁ and M₂.\n\n---\n\n## 2. Small‑Signal Analysis\n\nApply a small signal \\(v_{in}\\) (with DC bias point \\(V_{IN},V_{OUT},V_X\\)).  \nThe small‑signal model includes \\(g_{m1},g_{m2}\\) and output resistances \\(r_{o1},r_{o2}\\).\n\n### 2.1 Intermediate node \\(v_x\\)\n\nKCL at \\(V_X\\) gives\n\\[\ng_{m1}v_{in}+\\frac{v_x}{r_{o1}} = g_{m2}(v_{in}-v_x)+\\frac{v_{out}-v_x}{r_{o2}} .\n\\]\n\n### 2.2 Output node \\(v_{out}\\)\n\nKCL at \\(V_{out}\\) gives\n\\[\n\\frac{v_{out}}{R_D}+g_{m2}(v_{in}-v_x)+\\frac{v_{out}-v_x}{r_{o2}}=0 .\n\\]\n\nSolving the two equations (ignoring \\(r_{o1},r_{o2}\\) first, i.e. \\(\\lambda\\to 0\\)) yields\n\\[\nv_x = v_{in}\\left(1-\\frac{g_{m1}}{g_{m2}}\\right) \\;\\;\\xrightarrow{g_{m1}=g_{m2}}\\;\\; v_x\\approx 0 .\n\\]\n\nSubstituting back into the output equation:\n\\[\n\\boxed{A_v \\equiv \\frac{v_{out}}{v_{in}} \\approx -g_{m1}R_D } .\n\\]\n\n**Key insight:** Even though both gates are driven, the effective transconductance that determines the gain is that of the bottom transistor **M₁**. The top transistor M₂ acts like a cascode device that boosts the output resistance but does not increase \\(G_m\\).\n\n### 2.3 Exact gain (including \\(r_{o1},r_{o2}\\))\n\nSolving the full linear system gives\n\\[\nA_v = -g_{m1}R_D\\,\n\\frac{1+g_{m2}r_{o2}+r_{o2}/r_{o1}}\n{1+R_D/r_{o2}+R_D/r_{o1}+g_{m2}r_{o1}+ \\dots}\n\\;\\approx\\; -g_{m1}R_D\n\\quad (\\text{when } R_D \\ll r_{o2}(1+g_{m2}r_{o1})).\n\\]\n\n### 2.4 Output resistance \\(R_{out}\\)\n\nSet \\(v_{in}=0\\) and apply a test voltage \\(v_t\\) at \\(V_{out}\\). The gate of M₂ is now AC ground, so the stack behaves exactly like a cascode current source. Hence\n\\[\n\\boxed{R_{stack}\\approx r_{o2}\\bigl(1+g_{m2}r_{o1}\\bigr)+r_{o1}} .\n\\]\n\nBecause \\(R_D\\) is in parallel:\n\\[\n\\boxed{R_{out}=R_D \\;\\|\\; \\Bigl[r_{o2}\\bigl(1+g_{m2}r_{o1}\\bigr)+r_{o1}\\Bigr]} .\n\\]\n\nIf \\(R_D \\ll r_{o2}(1+g_{m2}r_{o1})\\), then \\(R_{out}\\approx R_D\\).\n\n---\n\n## 3. Summary of Results\n\n| Quantity | Expression (approx.) |\n|----------|----------------------|\n| **DC bias (cutoff)** | \\(V_{in}<V_{TH}\\Rightarrow V_{out}=V_{DD}\\) |\n| **DC bias (active)** | Solve coupled triode/saturation equations for \\(I_D\\) and \\(V_X\\); \\(V_{out}=V_{DD}-I_D R_D\\) |\n| **Small‑signal gain** | \\(A_v \\approx -g_{m1}R_D\\) |\n| **Output resistance** | \\(R_{out}\\approx R_D \\parallel \\bigl[r_{o2}(1+g_{m2}r_{o1})+r_{o1}\\bigr]\\) |\n| **Input resistance** | \\(R_{in}\\to\\infty\\) (MOS gate) |\n\nThus the circuit functions as a **common‑source amplifier with source‑degeneration‑like stacking**: M₁ provides the voltage gain \\(-g_{m1}R_D\\), while M₂ raises the output impedance (cascode action) without altering the transconductance, exactly as in a regulated cascode—except here the cascode gate is driven by the same input signal.",
        "format": "markdown",
        "sha256": "3556fd71a25ef9c0423ba63a3528f0c4089612c4978ff79acf3d745bf2bf0b60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It identifies the tied-gate series NMOS topology, but analyzes it as a true cascode and claims cascode-level output-resistance boosting. The essential result is that the lower device is in triode and the pair acts approximately like one NMOS with effective channel length L1+L2; this mechanism is missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 25374,
        "total_tokens": 27583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 25374,
        "total_tokens": 27583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23393,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **single‑ended NMOS differential pair** (source‑coupled pair):\n\n* **M₁** and **M₂** share a common source node that is fed by the ideal tail current source **I₁** (to ground).\n* **M₁** gate = input **V_in**; its drain is tied directly to the supply **V_DD** (AC ground).\n* **M₂** gate = DC bias **V_b**; its drain is the output node **V_out** and is loaded by resistor **R_D** to **V_DD**.\n* For AC analysis **V_DD** and **V_b** are ground.\n\nBecause the tail current source is open for AC signals, the two transistors share the source node voltage **v_s**.\n\n---\n\n## 1. DC Operating Point\n\nAssume both devices are in saturation and are matched (W/L)₁ = (W/L)₂ = W/L, with\n\\[\nI_D = \\tfrac12 k'(W/L)(V_{GS}-V_{TH})^2 .\n\\]\n\nThe tail source forces\n\\[\nI_{D1}+I_{D2}=I_1 .\n\\]\n\nWith common source voltage **V_S**:\n\\[\n\\begin{cases}\nI_{D1}= \\tfrac12 k'(W/L)(V_{in}-V_S-V_{TH})^2 \\\\[4pt]\nI_{D2}= \\tfrac12 k'(W/L)(V_b-V_S-V_{TH})^2\n\\end{cases}\n\\]\n\nThese two equations determine **V_S** and the split of **I₁**. The DC output voltage is\n\\[\n\\boxed{V_{OUT}=V_{DD}-I_{D2}R_D } .\n\\]\n\nIf **V_in = V_b**, then **I_D1 = I_D2 = I₁/2** and\n\\[\nV_{OUT}=V_{DD}-\\frac{I_1R_D}{2}.\n\\]\n\n---\n\n## 2. Small‑Signal Analysis\n\nDefine **v_in**, **v_s**, **v_out** as the AC components.  \nThe gate of M₂ is AC ground (**v_g2 = 0**).  \nThe gate of M₁ is **v_in**; its drain is AC ground (**v_d1 = 0**).\n\n### Source‑node KCL\nWith transistor output resistances **r_o1**, **r_o2**:\n\\[\nv_s\\Bigl(g_{m1}+g_{m2}+\\frac1{r_{o1}}+\\frac1{r_{o2}}\\Bigr)\n= g_{m1}v_{in}+\\frac{v_{out}}{r_{o2}} .\n\\tag{1}\n\\]\n\n### Output‑node KCL\n\\[\nv_{out}\\Bigl(\\frac1{R_D}+\\frac1{r_{o2}}\\Bigr)\n= v_s\\Bigl(g_{m2}+\\frac1{r_{o2}}\\Bigr) .\n\\tag{2}\n\\]\n\nSolving (1) and (2) for **v_out/v_in** gives the exact voltage gain:\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\n\\frac{g_{m1}}{\\displaystyle\\frac{B\\,G}{A}-\\frac1{r_{o2}}}}\n\\]\nwhere \\(G=g_{m1}+g_{m2}+1/r_{o1}+1/r_{o2}\\), \\(A=g_{m2}+1/r_{o2}\\), and \\(B=1/R_D+1/r_{o2}\\).\n\n---\n\n### Practical case: matched devices, **r_o → ∞**\n\nIf **g_m1 = g_m2 = g_m** and channel‑length modulation is ignored (**r_o1 = r_o2 = ∞**):\n\nFrom (1): \\(\\displaystyle v_s=\\frac{g_m v_{in}}{g_{m1}+g_{m2}}=\\frac{v_{in}}{2}\\).\n\nFrom (2): \\(\\displaystyle v_{out}=v_s\\,g_m R_D = \\frac{g_m R_D}{2}\\,v_{in}\\).\n\nHence the **small‑signal voltage gain** is\n\\[\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{1}{2}\\,g_m R_D } .\n\\]\n\nThe gain is **positive**: an increase in **V_in** raises **I_D1**, which forces **I_D2** to drop (because **I_D1+I_D2≈I₁**); the smaller drop across **R_D** makes **V_out** rise.\n\nIf **r_o** is finite but matched (**r_o1=r_o2=r_o**), the result becomes\n\\[\n\\boxed{A_v = \\frac{g_m R_D}{2}\\;\\frac{1}{1+\\dfrac{R_D}{2r_o}}\n      = \\frac{g_m R_D\\,r_o}{R_D+2r_o}} .\n\\]\n\n---\n\n## 3. Input and Output Resistances\n\n* **Input resistance** (looking into the gate of M₁):\n  \\[\n  \\boxed{R_{in}\\approx \\infty}\n  \\]\n  (MOSFET gate draws no DC or AC current).\n\n* **Output resistance** (looking into **V_out** with **v_in = 0**):\n  The drain of M₂ sees **r_o2** in parallel with **R_D**; the coupled source node is approximately at AC ground because **v_s ≈ 0** when **v_in=0**. Thus\n  \\[\n  \\boxed{R_{out}\\approx R_D \\parallel r_{o2}} .\n  \\]\n  (More precisely, \\(R_{out}=R_D\\parallel\\bigl[r_{o2}(1+g_{m2}R_S)\\bigr]\\) with \\(R_S\\approx 1/g_{m1}\\parallel r_{o1}\\), but for most designs \\(R_D\\parallel r_{o2}\\) is sufficient.)\n\n---\n\n## 4. Summary of Key Results\n\n| Quantity | Expression (matched, ideal) |\n|----------|----------------------------|\n| Tail current split | \\(I_{D1}+I_{D2}=I_1\\) |\n| DC output | \\(V_{OUT}=V_{DD}-I_{D2}R_D\\) |\n| Source AC voltage | \\(v_s \\approx v_{in}/2\\) |\n| **Voltage gain** | \\(\\displaystyle A_v \\approx \\frac{1}{2}g_m R_D\\) |\n| Input resistance | \\(R_{in}\\to\\infty\\) |\n| Output resistance | \\(R_{out}\\approx R_D\\parallel r_{o2}\\) |\n\nThe circuit therefore acts as a **single‑ended amplifier** with moderate positive gain (\\(\\tfrac12 g_mR_D\\)), infinite input impedance, and an output impedance set mainly by **R_D**. The bias voltage **V_b** sets the quiescent current in M₂ and hence the DC level of **V_out**.",
        "format": "markdown",
        "sha256": "71cabd633596c34e484ee72b1a5c8a9facecd9d3517146b13c540cc0aebf8033"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair, with M2 biased at Vb and output at its drain, and gives the correct non-inverting gain for matched devices.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 18085,
        "total_tokens": 20138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 18085,
        "total_tokens": 20138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **single‑ended NMOS differential pair** (common‑source stage) with:\n\n* **M₁, M₂** – matched NMOS transistors (sources tied together at node $V_S$)\n* **$I_1$** – ideal tail current source (DC bias, AC open circuit)\n* **$R_D$** – drain load of $M_2$ connected to $V_{DD}$\n* **$V_{in}$** – signal applied to the gate of $M_1$\n* **$V_b$** – DC bias on the gate of $M_2$ (AC ground)\n* **$V_{out}$** – taken at the drain of $M_2$\n\nThe drain of $M_1$ is connected directly to $V_{DD}$ (AC ground).  \nBecause the substrate (body) of the NMOS devices is grounded, a **body effect** ($g_{mb}$) is present on both transistors.\n\n---\n\n## 1. DC Operating Point\n\nAssume both devices are in **saturation** and include channel‑length modulation ($\\lambda$) and body effect ($\\gamma$):\n\n$$V_{THj}=V_{TH0}+\\gamma\\Bigl(\\sqrt{2\\phi_F+V_S}-\\sqrt{2\\phi_F}\\Bigr),\\qquad j=1,2$$\n\n$$I_{Dj}=\\frac{1}{2}\\mu_n C_{ox}\\Bigl(\\frac{W}{L}\\Bigr)_j\\bigl(V_{GSj}-V_{THj}\\bigr)^2\\bigl(1+\\lambda V_{DSj}\\bigr)$$\n\nwith  \n$V_{GS1}=V_{in}-V_S$, $V_{GS2}=V_b-V_S$,  \n$V_{DS1}=V_{DD}-V_S$, $V_{DS2}=V_{out}-V_S$.\n\nThe tail constraint is\n\n$$\\boxed{I_{D1}+I_{D2}=I_1}$$\n\nand the output node gives\n\n$$\\boxed{V_{out}=V_{DD}-I_{D2}R_D}$$\n\nThese three equations determine $V_S$, $I_{D1}$, $I_{D2}$ and $V_{out}$ for a given $V_{in}$.\n\n**Saturation conditions**\n\n$$V_{DS1}\\ge V_{GS1}-V_{TH1}\\;\\Rightarrow\\;V_{DD}\\ge V_{in}-V_{TH1}$$\n$$V_{DS2}\\ge V_{GS2}-V_{TH2}\\;\\Rightarrow\\;V_{out}\\ge V_b-V_{TH2}$$\n\n---\n\n## 2. Small‑Signal Model\n\nReplace DC supplies by AC ground ($V_{DD}\\to 0$) and the current source by an open circuit.  \nDefine at the bias point ($Q$):\n\n$$g_{mj}=\\frac{\\partial I_{Dj}}{\\partial V_{GSj}}\\Big|_Q,\\qquad \ng_{mbj}=\\frac{\\gamma g_{mj}}{2\\sqrt{2\\phi_F+V_{SQ}}},\\qquad \nr_{oj}=\\frac{1}{\\lambda I_{Dj}}$$\n\nLet $v_{in},v_s,v_{out}$ be the AC components of $V_{in},V_S,V_{out}$.\n\n### Nodal equations\n\n**At the source node $V_S$** (KCL, $i_{s1}+i_{s2}=0$):\n\n$$v_s\\bigl(G_{m1}+G_{m2}+g_{o1}+g_{o2}\\bigr)=g_{m1}v_{in}+g_{o2}v_{out}$$\n\nwhere $G_{mj}=g_{mj}+g_{mbj}$ and $g_{oj}=1/r_{oj}$.\n\n**At the output node $V_{out}$** (KCL):\n\n$$v_{out}\\Bigl(\\frac{1}{R_D}+g_{o2}\\Bigr)=v_s\\bigl(G_{m2}+g_{o2}\\bigr)$$\n\n---\n\n## 3. Voltage Gain $A_v=\\dfrac{v_{out}}{v_{in}}$\n\nSolving the two nodal equations gives the exact gain:\n\n$$\\boxed{A_v=\\frac{g_{m1}}{\\Bigl(\\frac{1}{R_D}+g_{o2}\\Bigr)\\frac{G_{m1}+G_{m2}+g_{o1}+g_{o2}}{G_{m2}+g_{o2}}-g_{o2}}}$$\n\n### Matched case ($g_{m1}=g_{m2}=g_m$, $g_{mb1}=g_{mb2}=g_{mb}$, $r_{o1}=r_{o2}=r_o$)\n\nThe body‑effect terms cancel in the ratio and\n\n$$\\boxed{A_v=\\frac{g_m}{\\frac{2}{R_D}+\\frac{1}{r_o}}=\\frac{g_m}{2}\\Bigl(R_D\\parallel 2r_o\\Bigr)}$$\n\nFor long‑channel devices ($r_o\\to\\infty$):\n\n$$\\boxed{A_v\\approx \\frac{g_m R_D}{2}}$$\n\n**Sign:** Positive.  \nAn increase in $v_{in}$ raises $I_{D1}$; because $I_{D1}+I_{D2}=I_1$ is constant, $I_{D2}$ falls, reducing the drop across $R_D$ and pulling $V_{out}$ **up**.\n\n---\n\n## 4. Input and Output Resistances\n\n* **Input resistance** (looking into $V_{in}$):\n  $$\\boxed{R_{in}\\approx \\infty}$$\n  (MOSFET gate draws no DC or AC current).\n\n* **Output resistance** (looking into $V_{out}$ with $v_{in}=0$):\n  $$\\boxed{R_{out}=R_D\\parallel 2r_o}$$\n  (for the matched pair; more generally $R_{out}=R_D\\parallel\\bigl[r_{o2}(1+(g_{m2}+g_{mb2})R_S')\\bigr]$).\n\n---\n\n## 5. Summary of Circuit Behavior\n\n| Parameter | Expression (matched, $r_o\\to\\infty$) |\n|-----------|--------------------------------------|\n| DC bias | $I_{D1}+I_{D2}=I_1$, $V_{out}=V_{DD}-I_{D2}R_D$ |\n| Small‑signal gain | $A_v \\approx +\\dfrac{g_m R_D}{2}$ |\n| Input resistance | $R_{in}\\to\\infty$ |\n| Output resistance | $R_{out}\\approx R_D$ |\n| Function | Differential amplifier with single‑ended output; amplifies $v_{in}-v_b$ with half the gain of a fully differential stage (because only one side has a resistive load). |\n\nThe circuit therefore operates as a **low‑gain, high‑input‑impedance voltage amplifier** whose quiescent point is set by $I_1$ and $V_b$, and whose AC gain is determined primarily by the transconductance $g_m$ of $M_2$ and the load resistor $R_D$.",
        "format": "markdown",
        "sha256": "85b80299c67a6da3f4d041c5eb879f6c9246a58ff479035be6443f3c72f31927"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, including M2's gate bias and drain output, and gives the correct non-inverting gain trend. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 25790,
        "total_tokens": 27843,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 25790,
        "total_tokens": 27843,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **single‑ended NMOS differential pair** (M₁, M₂) with:\n\n* Tail current source **I₁** (AC open circuit)\n* **M₁**: gate = **V_in**, drain tied directly to **V_DD** (AC ground)\n* **M₂**: gate = bias voltage **V_b**, drain loaded by resistor **R_D** → **V_out**\n* Both sources are tied together at node **V_S**\n\nBecause the sources sit near ground and the drains near V_DD, both devices are **NMOS** (body/substrate is usually grounded, so a body‑effect term gₘb may be present).\n\n---\n\n## 1. DC Operating Point\n\nWith both transistors in saturation (ignoring channel‑length modulation, λ=0):\n\n\\[\nI_{D1}=\\frac{1}{2}k_1\\bigl(V_{GS1}-V_{th}\\bigr)^2,\\qquad \nI_{D2}=\\frac{1}{2}k_2\\bigl(V_{GS2}-V_{th}\\bigr)^2\n\\]\n\nwhere  \n\\(V_{GS1}=V_{in}-V_S\\) and \\(V_{GS2}=V_b-V_S\\).\n\nThe tail source forces\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nand the output node gives\n\n\\[\nV_{out}=V_{DD}-I_{D2}R_D .\n\\]\n\nThese three equations determine \\(V_S\\), \\(I_{D1}\\), \\(I_{D2}\\) and \\(V_{out}\\) implicitly for given \\(V_{in},V_b\\).\n\n---\n\n## 2. Small‑Signal Model\n\nReplace:\n* **V_DD** → AC ground\n* **I₁** → open circuit\n* Each transistor by its hybrid‑π model:  \n  \\(g_{m1},g_{m2}\\), output resistances \\(r_{o1},r_{o2}\\), and (if body is grounded) body‑effect sources \\(g_{mb1},g_{mb2}\\).\n\nDenote AC quantities by lowercase: \\(v_{in},v_b,v_{out},v_s\\).  \nSet \\(v_b=0\\) for the gain calculation.\n\n### Nodal equation at the common source \\(v_s\\)\n\n\\[\n\\bigl(g_{m1}+g_{mb1}+g_{o1}+g_{m2}+g_{mb2}+g_{o2}\\bigr)v_s\n= g_{m1}v_{in}+g_{o2}v_{out}\n\\tag{1}\n\\]\n\nwhere \\(g_{oi}=1/r_{oi}\\).\n\n### Nodal equation at the output \\(v_{out}\\)\n\n\\[\nv_{out}\\Bigl(\\frac{1}{R_D}+g_{o2}\\Bigr)=v_s\\bigl(g_{m2}+g_{mb2}+g_{o2}\\bigr)\n\\tag{2}\n\\]\n\n---\n\n## 3. Voltage Gain \\(A_v = v_{out}/v_{in}\\)\n\nSolving (1)–(2) gives the **exact** gain (including \\(r_o\\) and body effect):\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}\\bigl(g_{m2}+g_{mb2}+g_{o2}\\bigr)}\n{\\bigl(\\frac{1}{R_D}+g_{o2}\\bigr)\\bigl(g_{m1}+g_{m2}+g_{mb1}+g_{mb2}+g_{o1}+g_{o2}\\bigr)\n-g_{o2}\\bigl(g_{m2}+g_{mb2}+g_{o2}\\bigr)}\n}\n\\]\n\nIf body effect is negligible (\\(g_{mb}=0\\)) this simplifies to\n\n\\[\nA_v=\n\\frac{g_{m1}\\bigl(g_{m2}+1/r_{o2}\\bigr)}\n{\\bigl(\\frac{1}{R_D}+\\frac{1}{r_{o2}}\\bigr)\\bigl(g_{m1}+g_{m2}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\bigr)\n-\\frac{1}{r_{o2}}\\bigl(g_{m2}+\\frac{1}{r_{o2}}\\bigr)}\n\\]\n\n### Practical approximation (\\(r_o\\to\\infty\\), \\(\\lambda=0\\))\n\nWith \\(r_{o1},r_{o2}\\to\\infty\\) the source node impedance collapses and\n\n\\[\nv_s \\approx \\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}\n\\]\n\ngiving\n\n\\[\n\\boxed{\nA_v \\approx \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_D\n}\n\\]\n\nFor **matched devices** (\\(g_{m1}=g_{m2}=g_m\\)):\n\n\\[\n\\boxed{\nA_v \\approx \\frac{1}{2}\\,g_m R_D\n}\n\\]\n\n**Sign:** Positive.  \nIf \\(v_{in}\\uparrow\\) → M₁ conducts more → \\(v_s\\uparrow\\) → \\(v_{GS2}\\) becomes more negative → \\(I_{D2}\\downarrow\\) → smaller drop across \\(R_D\\) → \\(v_{out}\\uparrow\\).\n\nIf channel‑length modulation is included but small, replace \\(R_D\\) by the effective load \\(R_D\\parallel r_{o2}\\) and apply the correction factor from the exact formula above.\n\n---\n\n## 4. Input & Output Resistance\n\n* **Input resistance** (looking into \\(V_{in}\\) or \\(V_b\\)):\n  \\[\n  R_{in}\\approx \\infty \\quad (\\text{MOS gate oxide})\n  \\]\n\n* **Output resistance** (looking into \\(V_{out}\\) with \\(v_{in}=0\\)):\n  The resistance seen through M₂ is boosted by the source impedance \\(R_S\\approx 1/[(g_{m1}+g_{mb1})+(g_{m2}+g_{mb2})]\\):\n  \\[\n  R_{o,M2}\\approx r_{o2}\\Bigl[1+(g_{m2}+g_{mb2})R_S\\Bigr]\n  \\]\n  Hence\n  \\[\n  \\boxed{\n  R_{out}\\approx R_D \\parallel R_{o,M2}\n  }\n  \\]\n  For matched devices (\\(g_{m1}=g_{m2}=g_m\\), \\(r_o\\to\\infty\\) ignored):\n  \\[\n  R_{out}\\approx R_D \\parallel \\bigl[r_{o2}(1+\\tfrac{1}{2}g_m r_{o2})\\bigr]\\approx R_D\\parallel \\tfrac{3}{2}r_{o2}.\n  \\]\n\n---\n\n## 5. Summary\n\n| Quantity | Expression (matched, \\(\\lambda=0\\)) |\n|----------|-----------------------------------|\n| DC bias | \\(I_{D1}+I_{D2}=I_1\\), \\(V_{out}=V_{DD}-I_{D2}R_D\\) |\n| Small‑signal gain | \\(A_v \\approx \\tfrac{1}{2}g_m R_D\\) (positive) |\n| Input resistance | \\(R_{in}\\to\\infty\\) |\n| Output resistance | \\(R_{out}\\approx R_D \\parallel r_{o2}[1+\\tfrac{1}{2}g_m r_{o2}]\\) |\n\nThe circuit therefore functions as a **single‑ended differential amplifier**: it amplifies the difference between \\(V_{in}\\) and the bias \\(V_b\\) with a gain of roughly one‑half that of a fully differential stage (because only one side carries the resistive load and the tail current source is AC open).",
        "format": "markdown",
        "sha256": "2166fb608df988acf5049880fe7235b5cc28920c373c602fb5270bb561a25037"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair with M₂ biased at V_b and the output at its drain, and gives the correct non-inverting gain approximation. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 26035,
        "total_tokens": 28088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 26035,
        "total_tokens": 28088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nThe gate of the source-follower transistor \\(M_1\\) is driven through the resistor \\(R_S\\). The gate-source capacitance \\(C_{gs1}\\) couples the output node back to the gate, and the gate voltage is therefore delayed by the \\(R_S C_{gs1}\\) (and \\(C_{gd1}\\)) network. Through the transconductance \\(g_{m1}\\) this delayed gate voltage creates a feedback current that can be 90° out of phase with \\(V_{out}\\). When \\(R_S g_{m1}>1\\) the capacitive current through \\(C_{gs1}\\) is over-compensated and the net impedance acquires a term \\(+j\\omega L\\) with  \n\n\\[\nL \\approx C_{gs1}\\Bigl(R_S-\\frac{1}{g_{m1}}\\Bigr)>0 .\n\\]\n\nHence \\(Z_{out}\\) behaves like a resistor \\(1/g_{m1}\\) in series with an inductor (all in parallel with \\(r_{o1}\\|r_{o2}\\)).\n\n---\n\n### Detailed derivation / reasoning\n\n**1. Circuit identification**  \n\\(M_1\\) is an NMOS source follower: drain at \\(V_{DD}\\) (AC ground), source at \\(V_{out}\\), gate driven via \\(R_S\\).  \n\\(M_2\\) is an NMOS current-sink load (gate bias \\(V_b\\) = AC ground).\n\n**2. Small-signal model (AC ground on \\(V_{in}\\) and \\(V_{DD}\\))**  \n\n| Element | Value / connection |\n|---|---|\n| \\(M_1\\) | \\(g_{m1},\\; r_{o1},\\; C_{gs1}\\) (gate–source = gate–\\(V_{out}\\)), \\(C_{gd1}\\) (gate–ground) |\n| \\(M_2\\) | \\(r_{o2}\\) (plus its own caps, ignored for the qualitative argument) |\n| Input network | \\(R_S\\) from gate node \\(V_g\\) to ground |\n\nApply a test voltage \\(V_x\\) at \\(V_{out}\\) and find \\(I_x\\).\n\n**3. Gate-node equation**  \nKCL at \\(V_g\\):\n\n\\[\n\\frac{V_g}{R_S}+j\\omega C_{gd1}V_g+j\\omega C_{gs1}(V_g-V_x)=0\n\\]\n\n\\[\n\\Rightarrow\\quad \nV_g = \\frac{j\\omega C_{gs1}R_S}{1+j\\omega R_S(C_{gs1}+C_{gd1})}\\,V_x .\n\\]\n\nSo \\(V_g\\) is **not** zero; it is proportional to \\(j\\omega V_x\\) filtered by the pole at  \n\\(\\omega_p\\approx 1/[R_S(C_{gs1}+C_{gd1})]\\).\n\n**4. KCL at the output node**  \nThe current leaving \\(V_{out}\\) (ignoring the test source) is\n\n* through \\(r_{o1},r_{o2}\\): \\(V_x/r_{o1}+V_x/r_{o2}\\)\n* through \\(C_{gs1}\\): \\(j\\omega C_{gs1}(V_x-V_g)\\)\n* through the \\(M_1\\) current source: \\(g_{m1}(V_x-V_g)\\) (the source-follower action)\n\nHence\n\n\\[\nI_x = \\Bigl[\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}+g_{m1}+j\\omega C_{gs1}\\Bigr]V_x\n      -\\bigl[g_{m1}+j\\omega C_{gs1}\\bigr]V_g .\n\\]\n\nSubstituting \\(V_g/V_x\\) and solving for \\(Z_{out}=V_x/I_x\\) gives (ignoring \\(r_o\\) for the moment)\n\n\\[\nZ_{branch}(s)=\\frac{1}{g_{m1}}\\,\n\\frac{1+sR_S C_{gs1}}{1+sC_{gs1}/g_{m1}} .\n\\]\n\n**5. The inductive term**  \nExpand for \\(|s|\\ll g_{m1}/C_{gs1}\\):\n\n\\[\nZ_{branch}(s)\\approx \\frac{1}{g_{m1}}\n\\Bigl[1+sC_{gs1}\\Bigl(R_S-\\frac{1}{g_{m1}}\\Bigr)+\\cdots\\Bigr]\n= \\frac{1}{g_{m1}} + sL + \\dots\n\\]\n\nwith\n\n\\[\n\\boxed{L \\approx C_{gs1}\\Bigl(R_S-\\frac{1}{g_{m1}}\\Bigr)} .\n\\]\n\nIf **\\(R_S > 1/g_{m1}\\)** then \\(L>0\\): the impedance contains a true inductive component in series with \\(1/g_{m1}\\).\n\nIncluding \\(r_{o1}\\) and \\(r_{o2}\\) only puts this branch in parallel with them:\n\n\\[\nZ_{out}(s)\\approx \\Bigl[\\frac{1}{g_{m1}}+sL\\Bigr]\\;\\Big\\|\\; (r_{o1}\\|r_{o2}) .\n\\]\n\n**6. Physical interpretation**  \n* At DC (\\(\\omega=0\\)) the capacitors are open, \\(V_g=0\\), and \\(Z_{out}=1/g_{m1}\\|r_{o1}\\|r_{o2}\\) – purely resistive.  \n* At intermediate frequencies the change in \\(V_{out}\\) is coupled through \\(C_{gs1}\\) to the gate. Because of \\(R_S\\) this gate voltage is delayed (phase lag).  \n* The delayed \\(V_g\\) modulates the drain-source current of \\(M_1\\) via \\(g_{m1}\\). The feedback current has a component that **opposes** the direct capacitive current through \\(C_{gs1}\\).  \n* When the resistive drop across \\(R_S\\) is large enough (\\(R_S g_{m1}>1\\)), the feedback current over-cancels the capacitive current, leaving a net current that **lags** \\(V_{out}\\) by 90° – exactly the signature of an inductor.\n\nThus, although the circuit contains no physical inductor, the **\\(R_S\\!-\\!C_{gs1}\\) delay network combined with the transconductance \\(g_{m1}\\)** synthesizes an inductive impedance over the frequency range between the pole \\(\\omega_p\\) and the zero introduced by \\(C_{gd1}\\) (or up to the zero at \\(s=-g_{m1}/C_{gs1}\\)). At very high frequencies the capacitors short and \\(Z_{out}\\to R_S\\), so the inductive behavior is observed in a well-defined band.",
        "format": "markdown",
        "sha256": "73557132f7fe60492389428feab0dbffcc279a2f30d731beaffcbd058b9a0025"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the source follower and the key transition from about 1/gm at low frequencies toward RS at high frequencies, giving an inductive rise when RS > 1/gm. The stated approximate L omits a 1/gm factor, but that ancillary magnitude error does not change the essential mechanism or trend.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 24221,
        "total_tokens": 26023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 24221,
        "total_tokens": 26023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **common-source stage** ($M_1$) with an active current-source load ($M_2$). Without parasitics its output impedance is purely resistive: $R_{DC}=r_{o1}\\parallel r_{o2}$. The inductive behavior comes from the **Miller feedback capacitance** $C_{gd1}$ interacting with the **gate resistance $R_S$** and the gate-source capacitance $C_{gs1}$.\n\n---\n\n### 1. Small-signal feedback path\nSet all DC sources to AC ground ($V_{DD},V_b,V_{in}=0$). Apply a test voltage $V_x$ at $V_{out}$. The gate of $M_1$ is not at AC ground: it is connected to ground through $R_S$ and also coupled to the drain via $C_{gd1}$ and to ground via $C_{gs1},C_{gb1}$.\n\nThe gate voltage is\n$$V_g = V_x\\frac{sR_S C_{gd1}}{1+sR_S C_{gg}},\\qquad C_{gg}=C_{gs1}+C_{gb1}+C_{gd1}$$\n\nThus $V_{gs1}=V_g$ is proportional to $sV_x$ at low frequencies and acquires a real (in-phase) component near the pole $\\omega_p\\approx 1/R_S C_{gg}$.\n\n---\n\n### 2. Output admittance\nThe current leaving the output node is the sum of:\n- resistive currents through $r_{o1},r_{o2}$\n- capacitive currents through $C_{db1},C_{db2},C_{gd2}$\n- the direct feedforward current through $C_{gd1}$: $sC_{gd1}(V_x-V_g)$\n- the transistor current: $g_{m1}V_{gs1}=g_{m1}V_g$\n\nPutting everything together:\n$$Y_{out}(s)=\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}+sC_{tot}+\\frac{sR_S C_{gd1}\\bigl(g_{m1}-sC_{gd1}\\bigr)}{1+sR_S C_{gg}}$$\n\nwhere $C_{tot}=C_{db1}+C_{db2}+C_{gd1}+C_{gd2}$.\n\n---\n\n### 3. Where the inductance appears\nWrite $Y_{out}(j\\omega)$. Its imaginary part is\n$$\\mathrm{Im}\\,Y_{out}= \\omega C_{tot}+\\frac{\\omega R_S C_{gd1}g_{m1}-\\omega^3 R_S^2 C_{gd1}^2 C_{gg}}{1+(\\omega R_S C_{gg})^2}$$\n\nAt low $\\omega$ the $\\omega$ terms dominate $\\Rightarrow$ capacitive.  \nBut at higher frequencies ($\\omega>\\sqrt{g_{m1}/R_S C_{gd1}C_{gg}}$) the **negative $\\omega^3$ term dominates**, so\n$$\\mathrm{Im}\\,Y_{out}<0 \\;\\Longrightarrow\\; \\mathrm{Im}\\,Z_{out}=\\mathrm{Im}\\frac{1}{Y_{out}}>0$$\n\nA positive imaginary part in $Z_{out}(j\\omega)$ means **inductive** behavior ($Z\\approx R+j\\omega L$).\n\n---\n\n### 4. Physical intuition\n- $C_{gd1}$ couples the output back to the gate.\n- Through $R_S$ and $C_{gs1}$ this creates a **phase-lagged gate voltage** $V_g$.\n- $g_{m1}$ converts $V_g$ into a drain current that is initially in quadrature with $V_x$ (capacitive-looking).\n- At the same time, $C_{gd1}$ feeds current directly from drain to gate. The second-order interaction ($V_x\\to C_{gd1}\\to V_g\\to C_{gd1}\\to I$) produces a term $\\propto -j\\omega^3$.\n- This cancels part of the direct capacitive susceptance and, in a band of frequencies, makes the net susceptance negative—exactly the signature of an inductor.\n\nThe result is that $Z_{out}(s)$ has **one zero and two poles**:\n$$Z_{out}(s)\\approx \\frac{1+sR_S C_{gg}}{G\\bigl(1+s/\\omega_{p1}\\bigr)\\bigl(1+s/\\omega_{p2}\\bigr)}$$\nIf the zero lies between the two poles, $Z_{out}$ behaves like $R_{out}\\parallel j\\omega L_{eq}$ with\n$$L_{eq}\\approx \\frac{R_S C_{gd1}}{g_{m1}}$$\nin parallel with the remaining capacitances.\n\nSo the “hidden” $RC$ network at the gate of $M_1$ transforms the capacitive Miller feedback into an **effective inductance** at the output.",
        "format": "markdown",
        "sha256": "9cd7ffa09dfc11dc496735c8964cb7cd3e227247fbf318e31b7544ffb1c7682f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source follower as a common-source stage and analyzes the drain as the output. It attributes inductive behavior to Miller feedback through Cgd, missing the essential mechanism: Cgs makes Zout transition from about 1/gm1 at low frequencies to RS at high frequencies, rising when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 19437,
        "total_tokens": 21239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 19437,
        "total_tokens": 21239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, **M₁ is an NMOS source follower** (drain at AC ground V_DD, source at V_out) and **M₂ is an NMOS current-source load** (gate biased at V_b, source grounded).  \nAt DC/low frequency the gate of M₁ is an AC open circuit, so with V_in = 0 the gate sits at AC ground through R_S. Then v_gs1 ≈ –v_x and\n\nZ_out(0) ≈ 1/g_m1 || r_o1 || r_o2\n\nwhich is purely resistive. The impedance becomes inductive only when the transistor capacitances are included.\n\n---\n\n### 1. The feedback path\n\nThe key element is **C_gs1**, which connects the output node (the source of M₁) directly back to its gate.  \nThe gate is **not** a perfect AC ground because of the resistance **R_S** (the source resistance of the preceding stage). Together with C_gd1 (gate-to-drain, i.e. gate-to-ground) they form an RC network at the gate:\n\nv_g is determined by the capacitive divider between C_gs1 (to v_x) and (C_gd1 in parallel with R_S) to ground.\n\nSpecifically,\n\nv_g = v_x · [s C_gs1 R_S] / [1 + s R_S (C_gs1+C_gd1)]\n\nso that\n\nv_gs1 = v_g – v_x = –v_x · [1 + s R_S C_gd1] / [1 + s R_S (C_gs1+C_gd1)]\n\nThus v_gs1 is **frequency-dependent**: at low ω it is ≈ –v_x, but at high ω it tends to 0 because C_gs1 shorts the gate to the source.\n\n---\n\n### 2. Pole–zero pair in Z_out(s)\n\nApplying a test source v_x at V_out and computing i_x gives\n\nZ_out(s) = v_x/i_x ≈ (1/g_m1 || r_o1 || r_o2) ·  \n      [1 + s R_S(C_gs1+C_gd1)] / [1 + s(C_gs1/g_m1 + R_S C_gd1) + s²·(...)]\n\nSo Z_out(s) has:\n\n* a **zero** at ω_z ≈ 1/[R_S(C_gs1+C_gd1)]\n* a **pole** (or poles) at a higher frequency ω_p ≈ g_m1/C_gs1 (when R_S ≫ 1/g_m1)\n\nIf **R_S > 1/g_m1**, then ω_z < ω_p. Between these two frequencies the denominator is ≈ 1 + jω/ω_p while the numerator is ≈ 1 + jω/ω_z, and the impedance behaves like\n\nZ_out(jω) ≈ R + jωL\n\nwith\n\nR ≈ 1/g_m1 || r_o1 || r_o2  \nL ≈ R_S C_gs1 / g_m1\n\nHence the output impedance is **inductive** in that band.\n\n---\n\n### 3. Physical intuition\n\n* A sudden step up in V_out couples instantly to the gate through C_gs1, momentarily making v_gs1 large and changing the current I_D1 supplied by M₁.\n* The gate voltage then relaxes back toward ground with the time constant τ ≈ R_S(C_gs1+C_gd1).\n* This **delayed current response** (large initially, then decaying exponentially) is exactly the v = L di/dt behavior of an inductor.\n\nIn short: **C_gs1 provides AC feedback from the output to the gate, and R_S prevents the gate from being a perfect AC ground.** The resulting RC time constant, translated back to the output through the transconductance g_m1, creates a pole–zero pair in Z_out(s) with the zero at lower frequency—giving an inductive region.",
        "format": "markdown",
        "sha256": "2e2aeda9d6c77f2919818844d2122b6f89515da5bbea3a915792d5f48a794ed6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and the R_S–C_gs feedback path, and derives a lower zero than pole for R_S > 1/g_m, giving an inductive band. The approximate L and step-response intuition are imprecise, but do not undermine the central explanation.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 24160,
        "total_tokens": 25962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23292,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 24160,
        "total_tokens": 25962,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23292,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit contains two n‑channel MOSFETs (M₁, M₂), one resistor R_D1 and one DC current source I_in.\n\n| Node / Branch | Connection |\n|---|---|\n| **V_DD** | Supply rail |\n| **R_D1** | Between V_DD and the output node **V_out** (this is also the drain of M₁) |\n| **M₁** | NMOS: drain → V_out, source → GND, gate → node **X** |\n| **M₂** | NMOS: drain → node **X**, source → GND, gate → **V_out** |\n| **I_in** | Current source from GND into node **X** |\n| **V_out** | Output terminal (drain of M₁, gate of M₂) |\n\nThus M₁ and M₂ form a **cross‑coupled NMOS pair**: the gate of each transistor is driven by the drain of the other.  \nM₁ is loaded by R_D1, while M₂ is loaded by the current source I_in.\n\n---\n\n## 1. DC (Bias) Analysis\n\nLet the transistor parameters be  \n\\(k=\\mu_n C_{ox}(W/L)\\) and threshold voltage \\(V_{TH}\\).  \nNeglect body effect and, for the first derivation, channel‑length modulation (\\(\\lambda\\approx 0\\)).\n\n### KCL equations\n* At node **X** (gate currents are zero):\n  \\[\n  I_{D2}=I_{in}\n  \\]\n\n* At node **V_out**:\n  \\[\n  I_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}\n  \\]\n\n### Transistor I–V (saturation assumed)\n\\[\nI_{D1}=\\frac{k}{2}\\bigl(V_{GS1}-V_{TH}\\bigr)^2\n      =\\frac{k}{2}\\bigl(V_X-V_{TH}\\bigr)^2\n\\]\n\n\\[\nI_{D2}=\\frac{k}{2}\\bigl(V_{GS2}-V_{TH}\\bigr)^2\n      =\\frac{k}{2}\\bigl(V_{out}-V_{TH}\\bigr)^2\n\\]\n\n### Solving for the operating point\nFrom \\(I_{D2}=I_{in}\\):\n\\[\n\\boxed{V_{out}=V_{TH}+\\sqrt{\\frac{2I_{in}}{k}}}\n\\qquad (I_{in}>0)\n\\]\n\nFrom \\(I_{D1}=(V_{DD}-V_{out})/R_{D1}\\):\n\\[\n\\boxed{V_X=V_{TH}+\\sqrt{\\frac{2}{kR_{D1}}\\bigl(V_{DD}-V_{out}\\bigr)}}\n\\]\n\n### Saturation conditions\nM₁ is in saturation if \\(V_{DS1}=V_{out}\\ge V_{GS1}-V_{TH}=V_X-V_{TH}\\).  \nM₂ is in saturation if \\(V_{DS2}=V_X\\ge V_{GS2}-V_{TH}=V_{out}-V_{TH}\\).\n\nIf either condition fails, replace the corresponding square‑law by the triode formula\n\\(I_D=k\\bigl[(V_{GS}-V_{TH})V_{DS}-\\tfrac12V_{DS}^2\\bigr]\\).\n\n> **Key DC result:** Once \\(I_{in}\\) is fixed, \\(V_{out}\\) is determined **only** by M₂ (it acts as a square‑root current‑to‑voltage converter). The value of \\(V_X\\) is then set by M₁ and the drop across R_D1.\n\n---\n\n## 2. Small‑Signal (AC) Analysis\n\nLinearize around the DC point. Define small‑signal voltages \\(v_{out}\\) and \\(v_x\\).\n\n\\[\ng_{m1}=k\\bigl(V_X-V_{TH}\\bigr)=\\sqrt{2kI_{D1}},\\qquad\ng_{m2}=k\\bigl(V_{out}-V_{TH}\\bigr)=\\sqrt{2kI_{in}}\n\\]\n\nOutput resistances (if \\(\\lambda\\neq0\\)):\n\\[\nr_{o1}=\\frac{1}{\\lambda I_{D1}},\\qquad r_{o2}=\\frac{1}{\\lambda I_{D2}}=\\frac{1}{\\lambda I_{in}}\n\\]\n\n### Nodal equations\n**At X:**\n\\[\ni_{in}= \\frac{v_x}{r_{o2}}+g_{m2}v_{out}\n\\;\\;\\Longrightarrow\\;\\;\nv_x = r_{o2}\\bigl(i_{in}-g_{m2}v_{out}\\bigr)\n\\]\n\n**At V_out** (R_D1, r_o1 and the M₁ current source are in parallel to ground):\n\\[\n\\frac{v_{out}}{R_{D1}}+\\frac{v_{out}}{r_{o1}}+g_{m1}v_x =0\n\\;\\;\\Longrightarrow\\;\\;\nv_x = -v_{out}\\left(\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}\\right)\\frac{1}{g_{m1}}\n\\]\n\n### Transimpedance gain \\(v_{out}/i_{in}\\)\nEliminating \\(v_x\\):\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}}=\n\\frac{1}{g_{m2}-\\dfrac{1}{g_{m1}r_{o2}}\\left(\\dfrac{1}{R_{D1}}+\\dfrac{1}{r_{o1}}\\right)}}\n\\]\n\nIf \\(r_{o1},r_{o2}\\to\\infty\\) (long‑channel devices):\n\\[\n\\boxed{\\frac{v_{out}}{i_{in}}\\approx \\frac{1}{g_{m2}}=\\frac{1}{\\sqrt{2kI_{in}}}}\n\\]\n\n### Output resistance \\(R_{out}\\) (set \\(i_{in}=0\\), apply test source \\(v_t\\))\nWith \\(i_{in}=0\\) we have \\(v_x=-g_{m2}r_{o2}v_t\\). Substituting into the KCL at V_out:\n\\[\nR_{out}=\\frac{v_t}{i_t}\n=\\frac{1}{\\displaystyle\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}-g_{m1}g_{m2}r_{o2}}\n\\]\n\n> **Important:** The term \\(-g_{m1}g_{m2}r_{o2}\\) represents **positive feedback** (an increase in \\(v_{out}\\) lowers \\(v_x\\), which reduces \\(I_{D1}\\) and lets \\(v_{out}\\) rise further).  \n> If\n> \\[\n> g_{m1}g_{m2}r_{o2}>\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}\n> \\]\n> then **\\(R_{out}<0\\)**: the circuit exhibits a negative resistance at the output.\n\n### Input resistance at node X\n\\[\nR_{in}=\\frac{v_x}{i_{in}}\n= \\frac{-r_{o2}\\left(\\dfrac{1}{R_{D1}}+\\dfrac{1}{r_{o1}}\\right)/g_{m1}}\n       {g_{m2}-\\left(\\dfrac{1}{R_{D1}}+\\dfrac{1}{r_{o1}}\\right)/(g_{m1}r_{o2})}\n\\]\n\n---\n\n## 3. Summary of Circuit Behavior\n\n| Feature | Expression / Condition |\n|---|---|\n| **DC transfer** | \\(V_{out}=V_{TH}+\\sqrt{2I_{in}/k}\\) (square‑root law) |\n| **Bias of M₁** | Set by \\(V_X\\) via \\(I_{D1}=(V_{DD}-V_{out})/R_{D1}\\) |\n| **Small‑signal gain** | Transimpedance \\(\\approx 1/g_{m2}\\) |\n| **Feedback** | Positive (cross‑coupled gates) |\n| **Output resistance** | Can be **negative** when \\(g_{m1}g_{m2}r_{o2}\\) dominates |\n| **Operating region** | Both in saturation if \\(V_X\\ge V_{out}-V_{TH}\\) and \\(V_{out}\\ge V_X-V_{TH}\\) |\n\nIn short, the circuit is a **cross‑coupled NMOS pair** that converts the input current \\(I_{in}\\) into an output voltage \\(V_{out}\\) through the square‑law of M₂, while M₁ together with R_D1 sets the bias point at node X. The cross‑coupling creates positive feedback, giving the circuit a potentially **negative output resistance** in the small‑signal domain.",
        "format": "markdown",
        "sha256": "78c8911415a9d48cbd0304a9674340b69fcc1e712ca03237dd5ca900aaf85b8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M2’s gate connection and the positive-feedback loop, and gives the matching loop-gain condition for negative resistance—a valid consequence under the golden full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 16608,
        "total_tokens": 18817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14617,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 16608,
        "total_tokens": 18817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14617,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit consists of:\n\n* Supply $V_{DD}$ and load resistor $R_{D1}$\n* Two MOSFETs $M_1$ and $M_2$ (both $n$-channel enhancement mode, with $M_2$ diode‑connected)\n* A DC current source $I_{\\mathrm{in}}$ feeding node $X$\n* Output node $V_{\\mathrm{out}}$\n\nConnections:\n* $V_{DD}\\rightarrow R_{D1}\\rightarrow V_{\\mathrm{out}}$\n* $M_1$: drain at $V_{\\mathrm{out}}$, source at ground, gate at $X$\n* $M_2$: drain and gate tied together at $X$, source at ground\n* $I_{\\mathrm{in}}$ injects current into node $X$ (gate currents are zero, so all of $I_{\\mathrm{in}}$ flows through $M_2$)\n\nThus $M_1$ and $M_2$ form a **current mirror** with mirror ratio $(W/L)_1/(W/L)_2$.  \nThe resistor $R_{D1}$ converts the mirrored current $I_{D1}$ into the output voltage $V_{\\mathrm{out}}$.\n\n---\n\n## 1. DC Analysis (Operating Point)\n\nAssume saturation for both devices (channel‑length modulation $\\lambda=0$ is ignored for the basic result; it can be added easily).\n\n### Transistor $M_2$ (diode‑connected, $V_{DS2}=V_{GS2}=V_X$)\n\nBecause gate current is zero:\n$$I_{D2}=I_{\\mathrm{in}}=\\frac{1}{2}k_n\\left(V_X-V_{THN}\\right)^2$$\nwhere $k_n=\\mu_n C_{ox}(W/L)_2$.\n\nSolving for the gate‑source voltage (and hence for $V_X$):\n$$\\boxed{V_X = V_{GS2}=V_{THN}+\\sqrt{\\frac{2I_{\\mathrm{in}}}{k_n}}}$$\n\nSince $V_{DS2}=V_{GS2}>V_{GS2}-V_{THN}$, $M_2$ is always in saturation (for $I_{\\mathrm{in}}>0$).\n\n### Transistor $M_1$\n\n$V_{GS1}=V_X$ (sources are both ground). Hence\n$$I_{D1}=\\frac{1}{2}k_1\\left(V_X-V_{THN}\\right)^2\n      =\\frac{k_1}{k_2}\\,I_{\\mathrm{in}}\n      =\\frac{(W/L)_1}{(W/L)_2}\\,I_{\\mathrm{in}}$$\n\nThe current through $R_{D1}$ is $I_{R}=I_{D1}$, so\n$$\\frac{V_{DD}-V_{\\mathrm{out}}}{R_{D1}} = \\frac{(W/L)_1}{(W/L)_2}\\,I_{\\mathrm{in}}$$\n\nTherefore the **DC transfer characteristic** is linear:\n$$\\boxed{V_{\\mathrm{out}} = V_{DD}-R_{D1}\\,\\frac{(W/L)_1}{(W/L)_2}\\,I_{\\mathrm{in}}}$$\n\n### Saturation condition for $M_1$\n\n$M_1$ remains in saturation provided\n$$V_{DS1}=V_{\\mathrm{out}} \\ge V_{GS1}-V_{THN}=V_X-V_{THN}\n\\;\\;\\Longrightarrow\\;\\;\nV_{\\mathrm{out}} > \\sqrt{\\frac{2I_{\\mathrm{in}}}{k_2}}$$\n\nIf $V_{\\mathrm{out}}$ falls below this value, $M_1$ enters the triode region and the relation becomes nonlinear.\n\n---\n\n## 2. Small‑Signal (AC) Analysis\n\nDefine the small‑signal parameters at the operating point ($Q$):\n\n$$g_{m1}=k_1\\left(V_{GS1Q}-V_{THN}\\right),\\qquad\n  g_{m2}=k_2\\left(V_{GS2Q}-V_{THN}\\right)=\\sqrt{2k_2I_{\\mathrm{in}}}$$\n\n$$g_{o1}=\\frac{1}{r_{o1}}=\\lambda_1 I_{D1Q},\\qquad\n  g_{o2}=\\frac{1}{r_{o2}}=\\lambda_2 I_{\\mathrm{in}}$$\n\n(Body‑effect terms $g_{mb1},g_{mb2}$ can be added in parallel if the bulks are not tied to the sources.)\n\n### Impedance at node $X$\n\nBecause $M_2$ is diode‑connected ($v_{gs2}=v_{ds2}=v_x$):\n$$Z_X \\approx \\frac{1}{g_{m2}+g_{mb2}+g_{o2}}\\approx\\frac{1}{g_{m2}}$$\n\nHence\n$$v_x = \\frac{i_{\\mathrm{in}}}{g_{m2}+g_{mb2}+g_{o2}}$$\n\n### KCL at $V_{\\mathrm{out}}$\n\nThe resistor $R_{D1}$ and transistor $M_1$ (source at $v_{\\mathrm{out}}$, drain at AC ground, gate at $v_x$) give:\n$$\\frac{v_{\\mathrm{out}}}{R_{D1}} + \\frac{v_{\\mathrm{out}}}{r_{o1}} + (g_{m1}+g_{mb1})(v_{\\mathrm{out}}-v_x)=0$$\n\nSolving for $v_{\\mathrm{out}}$:\n$$v_{\\mathrm{out}}=\\frac{g_{m1}}{\\displaystyle\\frac{1}{R_{D1}}+g_{o1}+g_{m1}+g_{mb1}}\\,v_x$$\n\n### Transimpedance gain $\\displaystyle R_m=\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}$\n\nCombining the two results:\n$$\\boxed{\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}\n= \\frac{g_{m1}}\n{\\bigl(g_{m2}+g_{mb2}+g_{o2}\\bigr)\n \\left(\\frac{1}{R_{D1}}+g_{o1}+g_{m1}+g_{mb1}\\right)}}$$\n\nIf channel‑length modulation and body effect are negligible ($\\lambda\\to0$, $\\chi\\to0$):\n$$\\boxed{\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}\n\\approx \\frac{g_{m1}}{g_{m2}}\\,\\frac{R_{D1}}{1+g_{m1}R_{D1}}}$$\n\nTwo useful limits:\n* **Low gain** ($g_{m1}R_{D1}\\ll 1$): $\\displaystyle \\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}\\approx \\frac{g_{m1}}{g_{m2}}R_{D1}=R_{D1}\\sqrt{\\frac{(W/L)_1}{(W/L)_2}}$\n* **High gain** ($g_{m1}R_{D1}\\gg 1$): $\\displaystyle \\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}\\approx \\frac{1}{g_{m2}}=\\frac{1}{\\sqrt{2k_2I_{\\mathrm{in}}}}$\n\nThus the circuit behaves as a **current‑to‑voltage converter** (transimpedance amplifier) whose gain is set primarily by the mirror ratio and the load resistor $R_{D1}$, and ultimately limited by $1/g_{m2}$.\n\n---\n\n## 3. Summary of Key Results\n\n| Quantity | Expression |\n|----------|------------|\n| $V_X$ | $V_{THN}+\\sqrt{2I_{\\mathrm{in}}/k_2}$ |\n| $I_{D1}$ | $\\dfrac{(W/L)_1}{(W/L)_2}I_{\\mathrm{in}}$ |\n| $V_{\\mathrm{out}}$ (DC) | $V_{DD}-R_{D1}\\dfrac{(W/L)_1}{(W/L)_2}I_{\\mathrm{in}}$ |\n| Small‑signal gain $v_{\\mathrm{out}}/i_{\\mathrm{in}}$ | $\\approx \\dfrac{g_{m1}}{g_{m2}}\\dfrac{R_{D1}}{1+g_{m1}R_{D1}}$ |\n\nThe circuit is therefore a **linear (for saturation) current‑controlled voltage source** with the mirror transistor $M_2$ setting the bias point $V_X$ and $M_1$ reproducing the current in the resistive load $R_{D1}$.",
        "format": "markdown",
        "sha256": "b11d3d31222e67ebbd381b8db1c75a1e15b63287b706a4ec43691603eabb2bf7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a common-source device driven by input current at X, but incorrectly treats M2 as diode-connected and misses the positive-feedback loop, matching the golden solution's explicit 1-point rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 23511,
        "total_tokens": 25720,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 23511,
        "total_tokens": 25720,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21570,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nLabel the nodes:\n- **Vout** – drain of M₁, gate of M₂, and the circuit output\n- **X** – drain of M₂, gate of M₁, and the input node\n- Both M₁ and M₂ are **n‑channel MOSFETs** with their sources grounded\n- R_D1 loads the drain of M₁ from V_DD\n- I_in is an independent current source feeding node X\n\nThe two transistors are **cross‑coupled**:  \nGate(M₁) = V_X,  Drain(M₁) = Vout → Gate(M₂)  \nGate(M₂) = Vout, Drain(M₂) = V_X\n\nBecause gate currents are zero, KCL at X gives I_D2 ≈ I_in.\n\n---\n\n## 1. DC Operating Point (Saturation Assumed)\n\nWrite the square‑law (with channel‑length modulation λ):\n\n\\[\nI_{D1}=K_1\\bigl(V_X-V_{TH}\\bigr)^2\\bigl(1+\\lambda_1 V_{out}\\bigr)\n\\]\n\n\\[\nI_{D2}=K_2\\bigl(V_{out}-V_{TH}\\bigr)^2\\bigl(1+\\lambda_2 V_X\\bigr)\n\\]\n\nwhere \\(K_i=\\tfrac12\\mu_n C_{ox}(W/L)_i\\).\n\n**KCL equations**\n\nAt X: \\(I_{in}=I_{D2}\\)\n\nAt Vout: \\(\\displaystyle \\frac{V_{DD}-V_{out}}{R_{D1}}=I_{D1}\\)\n\nHence\n\n\\[\n\\boxed{V_{out}=V_{TH}+\\sqrt{\\frac{I_{in}}{K_2\\bigl(1+\\lambda_2 V_X\\bigr)}}}\n\\]\n\n\\[\n\\boxed{V_X=V_{TH}+\\sqrt{\\frac{V_{DD}-V_{out}}{R_{D1}K_1\\bigl(1+\\lambda_1 V_{out}\\bigr)}}}\n\\]\n\nIf \\(\\lambda_1=\\lambda_2=0\\) (long‑channel approximation):\n\n\\[\nV_{out}\\approx V_{TH}+\\sqrt{\\frac{I_{in}}{K_2}},\\qquad\nV_X\\approx V_{TH}+\\sqrt{\\frac{V_{DD}-V_{out}}{R_{D1}K_1}}\n\\]\n\n**Saturation checks**\n\\[\nV_{DS1}=V_{out}\\ge V_{ov1}=V_{GS1}-V_{TH},\\qquad\nV_{DS2}=V_X\\ge V_{ov2}=V_{GS2}-V_{TH}\n\\]\n\n*Key point:* Ignoring λ, **Vout is set solely by I_in**; R_D1 and M₁ only determine the bias point V_X.\n\n---\n\n## 2. Small‑Signal (AC) Analysis\n\nUse the standard NMOS small‑signal model (\\(g_{mi}=2I_{Di}/V_{ovi}\\), \\(r_{oi}=1/\\lambda I_{Di}\\), \\(g_{oi}=1/r_{oi}\\)).\n\nDenote small‑signal voltages \\(v_x,v_{out}\\) and input current \\(i_{in}\\).\n\n### Nodal equations\n\n**Node X:**\n\\[\ni_{in}=g_{m2}v_{out}+g_{o2}v_x\n\\tag{1}\n\\]\n\n**Node Vout** (R_D1 → AC ground):\n\\[\n\\frac{v_{out}}{R_{D1}}+g_{m1}v_x+g_{o1}v_{out}=0\n\\;\\;\\Longrightarrow\\;\\;\nv_x=-v_{out}\\frac{1/R_{D1}+g_{o1}}{g_{m1}}\n\\tag{2}\n\\]\n\n### Transimpedance gain \\(R_m=v_{out}/i_{in}\\)\n\nSubstitute (2) into (1):\n\n\\[\ni_{in}=v_{out}\\!\\left[g_{m2}-\\frac{g_{o2}}{g_{m1}}\\Bigl(\\frac1{R_{D1}}+g_{o1}\\Bigr)\\right]\n\\]\n\n\\[\n\\boxed{R_m=\\frac{v_{out}}{i_{in}}=\n\\frac{1}{g_{m2}-\\dfrac{g_{o2}}{g_{m1}}\\Bigl(\\dfrac1{R_{D1}}+g_{o1}\\Bigr)}}\n\\]\n\nFor long channels (\\(g_{o1},g_{o2}\\to0\\)):\n\n\\[\n\\boxed{R_m\\approx\\frac{1}{g_{m2}}=\\frac{V_{ov2}}{2I_{D2}}}\n\\]\n\nSo the circuit is a **current‑to‑voltage converter** with gain ≈ 1/g_m2.\n\n### Output resistance \\(R_{out}\\) (set \\(i_{in}=0\\))\n\nFrom (1) with \\(i_{in}=0\\):\n\\[\nv_x=-\\frac{g_{m2}}{g_{o2}}\\,v_{out}\n\\]\n\nApply a test source \\(v_t\\) at Vout; the current entering is \\(i_t\\):\n\n\\[\ni_t=\\frac{v_t}{R_{D1}}+g_{m1}v_x+g_{o1}v_t\n=v_t\\!\\left[\\frac1{R_{D1}}+g_{o1}-\\frac{g_{m1}g_{m2}}{g_{o2}}\\right]\n\\]\n\n\\[\n\\boxed{R_{out}=\\frac{v_t}{i_t}=\n\\frac{1}{\\dfrac1{R_{D1}}+g_{o1}-\\dfrac{g_{m1}g_{m2}}{g_{o2}}}}\n\\]\n\nIf \\(R_{D1}\\to\\infty\\) and \\(g_{o1}\\to0\\):\n\n\\[\n\\boxed{R_{out}\\approx -\\frac{g_{o2}}{g_{m1}g_{m2}}=-\\frac{1}{g_{m1}(g_{m2}r_{o2})}}\n\\]\n\nThe negative sign shows **positive feedback** through \\(r_{o2}\\).  \nIf \\(\\lambda=0\\) exactly (\\(g_{o2}=0\\)), then \\(v_{out}=i_{in}/g_{m2}\\) is “stiff” and\n\n\\[\n\\boxed{R_{out}=0}\n\\]\n\n(i.e. an ideal current‑controlled voltage source).\n\n### Input resistance at X\n\n\\[\nR_{in}=\\frac{v_x}{i_{in}}\\approx\n-\\frac{1/R_{D1}+g_{o1}}{g_{m1}g_{m2}}\n\\;\\;\\xrightarrow{g_o\\to0}\\;\\;\n\\boxed{R_{in}\\approx -\\frac{1}{g_{m1}g_{m2}R_{D1}}}\n\\]\n\n(very small, negative).\n\n---\n\n## 3. Summary of Behavior\n\n| Quantity | Exact (small‑signal) | Long‑channel (\\(\\lambda=0\\)) |\n|----------|----------------------|------------------------------|\n| **DC Vout** | \\(V_{TH}+\\sqrt{I_{in}/[K_2(1+\\lambda_2V_X)]}\\) | \\(V_{TH}+\\sqrt{I_{in}/K_2}\\) |\n| **Transimpedance** \\(R_m=v_{out}/i_{in}\\) | \\(\\displaystyle\\frac{1}{g_{m2}-\\frac{g_{o2}}{g_{m1}}(\\frac1{R_{D1}}+g_{o1})}\\) | \\(1/g_{m2}\\) |\n| **Output resistance** \\(R_{out}\\) | \\(\\displaystyle\\Bigl[\\frac1{R_{D1}}+g_{o1}-\\frac{g_{m1}g_{m2}}{g_{o2}}\\Bigr]^{-1}\\) | \\(0\\) |\n| **Input resistance** \\(R_{in}\\) | \\(\\approx -\\frac{1/R_{D1}+g_{o1}}{g_{m1}g_{m2}}\\) | \\(\\approx -1/(g_{m1}g_{m2}R_{D1})\\) |\n\n**Physical interpretation:**  \nM₂ acts as a voltage‑controlled current source (transconductance \\(g_{m2}\\)) that converts the input current into a voltage at Vout. M₁ together with R_D1 forms a bias branch that sets the operating point V_X but, to first order, does not affect the I→V conversion. The cross‑coupling through the finite output resistances \\(r_{o1},r_{o2}\\) introduces a weak positive feedback, giving a small negative contribution to R_out. Ignoring channel‑length modulation, the circuit behaves as an **ideal transimpedance stage** with gain \\(1/g_{m2}\\) and zero output impedance.",
        "format": "markdown",
        "sha256": "3e9cd63cb7331deca1cd5189b05e92e17a2fc74c50c8918f0289d1ef25cad35f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M2’s gate as tied to Vout, recognizes the M1–M2 positive-feedback connection, and derives a negative input resistance, satisfying the golden solution’s explicit full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 22651,
        "total_tokens": 24860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 22651,
        "total_tokens": 24860,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **two-stage MOSFET amplifier** with a current-source input and resistive feedback/loading:\n\n| Element | Connection / Role |\n|---|---|\n| $M_1$ | NMOS, gate biased at $V_b$ (AC ground), source at node **X? No – source at node Z**, drain at node **X** |\n| $M_2$ | NMOS, gate driven by node **X**, source grounded, drain at node **Y** ($V_{out}$) |\n| $R_{D1}$ | Load resistor for $M_1$ ($V_{DD}\\to X$) |\n| $R_{D2}$ | Load resistor for $M_2$ ($V_{DD}\\to Y$) |\n| $R_F$ | Resistor from the source node **Z** to ground (carries $i_{RF}$) |\n| $I_{in}$ | Input current source (ground $\\to Z$) |\n| $V_{out}$ | Output taken at node **Y** |\n\nSo the signal path is:\n\n$$I_{in}\\;\\to\\; \\underbrace{Z}_{\\text{source of }M_1}\\;\\xrightarrow{M_1}\\;X\\;\\xrightarrow{M_2}\\;Y=V_{out}$$\n\n- **Stage 1 ($M_1$)**: Common-gate amplifier with source resistance $R_F$.\n- **Stage 2 ($M_2$)**: Common-source amplifier with load $R_{D2}$.\n- The overall circuit is a **transimpedance amplifier** ($V_{out}/I_{in}$).\n\n---\n\n## 1. DC Operating-Point Analysis\n\nAssume both transistors are in **saturation** and neglect channel-length modulation ($\\lambda\\approx 0$) for the bias calculation.\n\n### KCL at node Z\n$$I_{in}=I_{D1}+\\frac{V_Z}{R_F}\\quad\\Longrightarrow\\quad I_{D1}=I_{in}-\\frac{V_Z}{R_F}$$\n\n### Transistor equations\n$$I_{D1}=\\frac{1}{2}k_1'\\left(\\frac{W}{L}\\right)_1\\!\\bigl(V_b-V_Z-V_{THN}\\bigr)^2$$\n$$I_{D2}=\\frac{1}{2}k_2'\\left(\\frac{W}{L}\\right)_2\\!\\bigl(V_X-V_{THN}\\bigr)^2$$\n\n### Node voltages\n$$V_X = V_{DD}-I_{D1}R_{D1}$$\n$$V_{out}=V_{DD}-I_{D2}R_{D2}$$\n\nThese four equations determine $V_Z$, $V_X$, $V_{out}$, $I_{D1}$ and $I_{D2}$ for a given $I_{in}$.\n\n> **Check for saturation**\n> - $M_1$: $V_{DS1}=V_X-V_Z \\ge V_{GS1}-V_{THN}=V_b-V_Z-V_{THN}$\n> - $M_2$: $V_{DS2}=V_{out}\\ge V_{GS2}-V_{THN}=V_X-V_{THN}$\n\n---\n\n## 2. Small-Signal Equivalent Circuit\n\nReplace DC sources by AC ground ($V_{DD}\\to 0$, $V_b\\to 0$).  \nUse the hybrid-$\\pi$ model for each NMOS ($g_{m1},r_{o1}$ and $g_{m2},r_{o2}$).\n\nThe small-signal nodes are $v_z$, $v_x$, and $v_{out}$.\n\n### Key small-signal relations\n\n**At node Z (KCL):**\n$$i_{in}= \\frac{v_z}{R_F}+I_{S1}$$\nwhere the source current of $M_1$ is\n$$I_{S1}= -\\frac{v_x-v_z}{r_{o1}}+g_{m1}v_z\n      = v_z\\frac{1+g_{m1}r_{o1}}{R_{D1}+r_{o1}} \\quad\\text{(after using the X-node equation)}$$\n\nHence the **input resistance** seen at Z is\n$$\\boxed{R_{in}=\\frac{v_z}{i_{in}}=\\left[\\frac{1}{R_F}+\\frac{1+g_{m1}r_{o1}}{R_{D1}+r_{o1}}\\right]^{-1}}$$\n\nIf $r_{o1}\\to\\infty$:\n$$\\boxed{R_{in}\\approx R_F\\parallel\\frac{1}{g_{m1}}}$$\n\n**At node X (KCL):**\n$$\\frac{v_x}{R_{D1}}+\\frac{v_x-v_z}{r_{o1}}-g_{m1}v_z=0\n\\;\\Longrightarrow\\;\nv_x = v_z\\,\\frac{(1+g_{m1}r_{o1})R_{D1}}{R_{D1}+r_{o1}}$$\n\nThus the **voltage gain of stage 1** is\n$$\\boxed{A_{v1}=\\frac{v_x}{v_z}= -\\frac{(1+g_{m1}r_{o1})R_{D1}}{R_{D1}+r_{o1}}\\;\\Bigl/\\;\\Bigl[1+\\frac{R_{D1}}{r_{o1}}\\Bigr]\\;\\approx\\;-g_{m1}R_{D1}}$$\n(The negative sign comes from the common-gate inversion; with $r_{o1}\\to\\infty$, $A_{v1}\\approx -g_{m1}R_{D1}$ but multiplied by the factor relating $v_z$ to $v_x$ correctly—see full derivation below.)\n\nMore precisely, substituting $v_z$ in terms of $v_x$:\n$$v_z \\approx \\frac{v_x}{g_{m1}R_{D1}}\\quad(r_{o1}\\to\\infty)$$\n\n**At node Y / $V_{out}$ (KCL):**\n$$\\frac{v_{out}}{R_{D2}}+\\frac{v_{out}}{r_{o2}}+g_{m2}v_x=0$$\n\nSo the **gain of stage 2** is\n$$\\boxed{A_{v2}=\\frac{v_{out}}{v_x}=-g_{m2}\\bigl(R_{D2}\\parallel r_{o2}\\bigr)}$$\n\nIf $r_{o2}\\to\\infty$:\n$$\\boxed{A_{v2}\\approx -g_{m2}R_{D2}}$$\n\n---\n\n## 3. Overall Transimpedance Gain $\\displaystyle R_T=\\frac{v_{out}}{i_{in}}$\n\nCombining the three results:\n$$v_{out}=A_{v2}\\,v_x = A_{v2}\\,A_{v1}\\,v_z = A_{v1}A_{v2}\\,R_{in}\\,i_{in}$$\n\nWith $r_{o1},r_{o2}\\to\\infty$:\n$$R_T = \\bigl(-g_{m1}R_{D1}\\bigr)\\bigl(-g_{m2}R_{D2}\\bigr)\\left[\\frac{R_F}{1+g_{m1}R_F}\\right]$$\n\n$$\\boxed{\\frac{v_{out}}{i_{in}} = -\\,\\frac{g_{m1}g_{m2}R_{D1}R_{D2}R_F}{1+g_{m1}R_F}}$$\n\n**Interpretation:**\n- If $g_{m1}R_F\\gg 1$, the gain saturates at $\\displaystyle |R_T|\\approx g_{m2}R_{D1}R_{D2}$.\n- The factor $(1+g_{m1}R_F)^{-1}$ is the **source-degeneration** (or parallel-loading) effect of $R_F$ on $M_1$.\n\nWith finite $r_o$ values, replace $R_{D1}\\to R_{D1}\\parallel r_{o1}$ and $R_{D2}\\to R_{D2}\\parallel r_{o2}$ in the appropriate places; the full expression is\n\n$$\\boxed{\\frac{v_{out}}{i_{in}}=-g_{m2}(R_{D2}\\parallel r_{o2})\\,\n\\frac{(1+g_{m1}r_{o1})R_{D1}}{R_{D1}+r_{o1}}\\,\n\\left[\\frac{1}{R_F}+\\frac{1+g_{m1}r_{o1}}{R_{D1}+r_{o1}}\\right]^{-1}}$$\n\n---\n\n## 4. Output Resistance $R_{out}$\n\nSet $I_{in}=0$ (open circuit) and apply a test source $v_t$ at $Y$.\n\nBecause the left network ($Z,X,M_1$) is homogeneous and unexcited ($v_z=v_x=0$), the only path is through $M_2$ and $R_{D2}$.\n\n$$\\boxed{R_{out}=R_{D2}\\parallel r_{o2}}$$\n\nIf $\\lambda_2=0$ ($r_{o2}\\to\\infty$): $\\boxed{R_{out}=R_{D2}}$.\n\n---\n\n## 5. Small-Signal Current Through $R_F$\n\nThe current labeled $i_{RF}$ is simply\n$$\\boxed{i_{RF}=\\frac{v_z}{R_F}= \\frac{i_{in}}{1+g_{m1}R_F}\\quad(r_{o1}\\to\\infty)}$$\n\n---\n\n## Summary of Key Results (neglecting $\\lambda$)\n\n| Parameter | Expression |\n|---|---|\n| **Input resistance** | $R_{in}\\approx R_F\\parallel g_{m1}^{-1}$ |\n| **Stage-1 gain** | $A_{v1}\\approx -g_{m1}R_{D1}$ |\n| **Stage-2 gain** | $A_{v2}\\approx -g_{m2}R_{D2}$ |\n| **Transimpedance** | $\\displaystyle \\frac{v_{out}}{i_{in}}\\approx -\\frac{g_{m1}g_{m2}R_{D1}R_{D2}R_F}{1+g_{m1}R_F}$ |\n| **Output resistance** | $R_{out}\\approx R_{D2}$ |\n| **Current in $R_F$** | $\\displaystyle i_{RF}\\approx \\frac{i_{in}}{1+g_{m1}R_F}$ |\n\nThis completes the analysis: the circuit is a **common-gate / common-source cascade** with source loading $R_F$, converting the input current $I_{in}$ into an output voltage $V_{out}$ with the transimpedance gain shown above.",
        "format": "markdown",
        "sha256": "e9b2388c80af638b4088b6366683b8a8fd44a0683a4a754f8d4e966e537ed607"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies M1 as common-gate and M2 as common-source, but misconnects RF: it should run from Vout back to the input node, not from that node to ground. This misses the central negative-feedback mechanism and makes the derived transimpedance and input-resistance results inapplicable.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 26794,
        "total_tokens": 29211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24343,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 26794,
        "total_tokens": 29211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24343,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\nLabel the nodes as shown below  \n\n* **VDD** – supply rail  \n* **X** – drain of M₁ / gate of M₂ / bottom of R_D1  \n* **Y ≡ V_out** – drain of M₂ / bottom of R_D2  \n* **A** – source of M₁ / left end of R_F / input node  \n* **B** – source of M₂ / right end of R_F  \n\nThe elements are  \n\n| Element | Connection | Function |\n|---|---|---|\n| R_D1 | VDD → X | Load of stage 1 |\n| R_D2 | VDD → Y | Load of stage 2 |\n| M₁ | X (drain) – A (source), gate = V_b | **Common‑gate** stage (input at source A, gate AC/DC ground) |\n| M₂ | Y (drain) – B (source), gate = X | **Common‑source** stage (input at gate X, source B) |\n| R_F | A → B | Source‑coupling / feedback resistor |\n| I_in | Ground → A | Input signal (current) |\n| i_RF | Through R_F (A→B) | Feedback current |\n\nAssume both transistors are **n‑channel MOSFETs** operating in saturation and that the gate bias V_b and the supply V_DD are constant (AC ground).\n\n---\n\n## 1. DC bias analysis (λ = 0)\n\nWrite the saturation currents\n\n\\[\nI_{D1}= \\frac{1}{2}k_1\\bigl(V_{GS1}-V_{th1}\\bigr)^2,\n\\qquad \nI_{D2}= \\frac{1}{2}k_2\\bigl(V_{GS2}-V_{th2}\\bigr)^2\n\\]\n\nwith  \n\n\\[\nV_{GS1}=V_b-V_A,\\qquad V_{DS1}=V_X-V_A\n\\]\n\\[\nV_{GS2}=V_X-V_B,\\qquad V_{DS2}=V_{out}-V_B\n\\]\n\nKVL/KCL gives the five bias equations\n\n\\[\n\\boxed{I_{D1}= \\frac{V_{DD}-V_X}{R_{D1}}}\n\\tag{1}\n\\]\n\n\\[\n\\boxed{I_{D2}= \\frac{V_{DD}-V_{out}}{R_{D2}}}\n\\tag{2}\n\\]\n\n\\[\n\\boxed{I_{D2}=I_{in}+I_{D1}}\n\\tag{3}\n\\]\n\n\\[\n\\boxed{V_B-V_A = I_{D2}R_F}\n\\tag{4}\n\\]\n\n\\[\n\\boxed{I_{RF}=I_{D2}=I_{in}+I_{D1}}\n\\tag{5}\n\\]\n\nSolving (1)–(5) yields the quiescent point \\((V_X,V_A,V_B,V_{out},I_{D1},I_{D2})\\).\n\n---\n\n## 2. Small‑signal (AC) model\n\nReplace V_DD and V_b by AC ground.  \nModel M₁ and M₂ by their hybrid‑π equivalents: transconductances \\(g_{m1},g_{m2}\\) and output resistances \\(r_{o1},r_{o2}\\) (often \\(r_o\\to\\infty\\) is taken for hand analysis).\n\nDenote the AC node voltages by \\(v_a,v_b,v_x,v_y\\;(v_y\\equiv v_{out})\\) and the AC input by \\(i_{in}\\).\n\n### Nodal equations (KCL)\n\n**Node X**\n\\[\nv_x\\!\\left(\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}+g_{m1}\\right)-\\frac{v_a}{r_{o1}}=0\n\\tag{6}\n\\]\n\n**Node A**\n\\[\ng_{m1}v_x+\\frac{v_x-v_a}{r_{o1}}+\\frac{v_a-v_b}{R_F}=i_{in}\n\\tag{7}\n\\]\n\n**Node B**\n\\[\ng_{m2}(v_x-v_b)+\\frac{v_y-v_b}{r_{o2}}+\\frac{v_b-v_a}{R_F}=0\n\\tag{8}\n\\]\n\n**Node Y (V_out)**\n\\[\n\\frac{v_y}{R_{D2}}-g_{m2}(v_x-v_b)-\\frac{v_y-v_b}{r_{o2}}=0\n\\tag{9}\n\\]\n\n---\n\n## 3. Key AC results (ignoring \\(r_o\\), i.e. \\(\\lambda=0\\))\n\nWith \\(r_{o1}=r_{o2}=\\infty\\) equation (6) gives\n\n\\[\nv_x\\Bigl(\\frac{1}{R_{D1}}+g_{m1}\\Bigr)=0 \\;\\;\\Longrightarrow\\;\\; v_x\\approx 0\n\\]\n\nso the gate of M₂ is at **AC ground**. The circuit reduces to a **common‑gate stage (M₂)** driven at its source through R_F.\n\nSolving (7)–(9) with \\(v_x=0\\):\n\n### Transimpedance gain \\(\\displaystyle R_m=\\frac{v_{out}}{i_{in}}\\)\n\n\\[\n\\boxed{\n\\frac{v_{out}}{i_{in}}=\n-\\frac{g_{m2}R_{D2}\\bigl(1+g_{m1}R_{D1}\\bigr)}\n{(g_{m1}+g_{m2})+g_{m1}g_{m2}(R_{D1}+R_F)}\n}\n\\tag{10}\n\\]\n\n*Limiting cases*\n\n* \\(R_F\\to 0\\) (sources tied together):  \n  \\(\\displaystyle \\frac{v_{out}}{i_{in}}\\to -R_{D2}\\frac{1+g_{m1}R_{D1}}{2+g_{m1}R_{D1}}\\)  \n  (full two‑stage cascade gain).\n\n* \\(g_{m1}\\to 0\\) (M₁ inactive):  \n  \\(\\displaystyle \\frac{v_{out}}{i_{in}}\\to -R_{D2}\\)  \n  (pure common‑gate current buffer).\n\n* \\(R_F\\to\\infty\\): gain \\(\\to 0\\) (no signal reaches M₂).\n\n### Input resistance \\(R_{in}=v_a/i_{in}\\)\n\n\\[\n\\boxed{\nR_{in}= \\frac{1+g_{m2}R_F}\n{(g_{m1}+g_{m2})+g_{m1}g_{m2}(R_{D1}+R_F)}\n}\n\\tag{11}\n\\]\n\nFor large \\(g_mR\\) products this behaves as  \n\\(R_{in}\\approx R_F+\\dfrac{1}{g_{m2}}\\) (the source impedance of the common‑gate stage) in parallel with the impedance looking into M₁ (\\(\\approx R_{D1}+r_{o1}(1+g_{m1}R_{D1})\\)).\n\n### Source voltage of M₂\n\n\\[\nv_b = -\\frac{i_{in}}{g_{m2}}\\;\\frac{1+g_{m1}R_{D1}}{1+\\dfrac{g_{m1}}{g_{m2}}+\\dots}\n\\;\\;\\Longrightarrow\\;\\;\nv_b\\approx -\\frac{i_{in}}{g_{m2}}\n\\quad (g_{m1}R_{D1}\\gg 1)\n\\]\n\nHence the AC current through R_F is\n\n\\[\n\\boxed{i_{RF}\\approx i_{in}}\n\\tag{12}\n\\]\n\nand the DC relation is (5): \\(I_{RF}=I_{D2}=I_{in}+I_{D1}\\).\n\n### Output resistance \\(R_{out}\\) (with \\(i_{in}=0\\))\n\nApplying a test source \\(v_t\\) at V_out and solving (6)–(9) gives\n\n\\[\n\\boxed{\nR_{out}\\approx R_{D2}\\;\\Big\\|\\;\\Bigl[r_{o2}\\bigl(1+g_{m2}R_F'\\bigr)+R_F'\\Bigr]\n}\n\\tag{13}\n\\]\n\nwhere \\(R_F'\\approx R_F\\|R_{in,A}\\).  \nIf \\(r_{o2}\\to\\infty\\) then simply\n\n\\[\n\\boxed{R_{out}\\approx R_{D2}} .\n\\tag{14}\n\\]\n\n---\n\n## 4. Physical interpretation\n\n1. **M₁** is a **common‑gate** stage. It sets the DC gate bias \\(V_X\\) for M₂ and provides a voltage gain \\(|A_{v1}|\\approx 1+g_{m1}R_{D1}\\) from node A to node X.\n2. **M₂** is a **common‑source** stage with its gate driven by \\(v_x\\) and its source coupled back to the input node through R_F.\n3. Because the gate current is zero, the AC current entering the source of M₂ equals the AC current leaving its drain: \\(i_{D2}\\approx i_{in}\\). Therefore the output voltage is essentially the drain current multiplied by the load resistor:\n   \\[\n   v_{out}\\approx i_{in}R_{D2}.\n   \\]\n   The factor \\((1+g_{m1}R_{D1})\\) in (10) accounts for the extra drive supplied by the first stage.\n\n---\n\n## 5. Summary of design formulas\n\n| Quantity | Formula (λ = 0) |\n|---|---|\n| DC bias | Solve system (1)–(4) |\n| Transimpedance gain \\(V_{out}/I_{in}\\) | Eq. (10) |\n| Input resistance \\(R_{in}\\) | Eq. (11) |\n| Output resistance \\(R_{out}\\) | Eq. (13)–(14) |\n| Feedback current | \\(I_{RF}=I_{D2}=I_{in}+I_{D1}\\) |\n| AC source voltage of M₂ | \\(v_b\\approx -i_{in}/g_{m2}\\) |\n\nThus the circuit is a **two‑stage cascade (common‑gate → common‑source) with resistive source feedback R_F**, acting primarily as a **current‑to‑voltage converter** with gain approximately \\(R_{D2}\\) and with the first stage providing additional drive and DC bias for the gate of M₂.",
        "format": "markdown",
        "sha256": "135ecdafc3ea2ba47c59808eeff885f0f57b273bd40710840d69ec73da0e2385"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies M1 as common-gate and M2 as a common-source stage driven by X, but connects RF to M2’s source rather than from Vout back to the input node. This misses the circuit’s essential negative-feedback topology, so its derived behavior and formulas do not analyze the shown transimpedance amplifier.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 37283,
        "total_tokens": 39700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 37283,
        "total_tokens": 39700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a two‑stage MOSFET amplifier with a current‑source input:\n\n* **M₁** – gate biased at DC voltage **V_b**, source at node **Z**, drain at node **X**.  \n  R_D1 is its drain load and also supplies the gate of M₂.\n* **M₂** – gate driven by **V_X**, source grounded, drain at **V_out**.  \n  R_D2 is its drain load.\n* **R_F** – resistor from the source node **Z** to ground.\n* **I_in** – input current source (AC + DC) injected into node **Z**.\n* **V_DD** – supply (AC ground).\n\nBecause the gate of M₁ is at AC ground, **M₁ operates in the common‑gate (CG) configuration** with source degeneration R_F.  \n**M₂ operates in the common‑source (CS) configuration**.\n\nBelow is the complete DC and small‑signal analysis (all transistors are assumed NMOS in saturation; λ and body effect are included symbolically and then simplified).\n\n---\n\n## 1. DC Operating Point\n\nLet  \n\\(I_{D1},I_{D2}\\) = drain currents of M₁,M₂,  \n\\(V_Z\\) = source voltage of M₁,  \n\\(V_X\\) = drain voltage of M₁ (gate of M₂),  \n\\(V_{out}\\) = drain voltage of M₂.\n\nKCL/KVL gives\n\n\\[\n\\begin{aligned}\nI_{D1} &= \\frac{V_{DD}-V_X}{R_{D1}} \\\\[4pt]\nI_{D2} &= \\frac{V_{DD}-V_{out}}{R_{D2}} \\\\[4pt]\nI_{in} &= I_{D1}+\\frac{V_Z}{R_F} \\\\[4pt]\nI_{D1} &= \\tfrac12 k_1\\bigl(V_{GS1}-V_{th1}\\bigr)^2\n        = \\tfrac12 k_1\\bigl(V_b-V_Z-V_{th1}\\bigr)^2 \\\\[4pt]\nI_{D2} &= \\tfrac12 k_2\\bigl(V_{GS2}-V_{th2}\\bigr)^2\n        = \\tfrac12 k_2\\bigl(V_X-V_{th2}\\bigr)^2\n\\end{aligned}\n\\]\n\nThese four coupled nonlinear equations determine \\((V_Z,V_X,V_{out})\\) for a given \\(I_{in}\\).  \nIf channel‑length modulation is included, replace the square‑law terms by\n\\(I_D = \\tfrac12 k(V_{GS}-V_{th})^2(1+\\lambda V_{DS})\\).\n\n---\n\n## 2. Small‑Signal Equivalent Circuit\n\nReplace DC sources by AC ground (\\(V_{DD}\\to 0\\), \\(V_b\\to 0\\)) and let the AC part of the input be \\(i_{in}\\).\n\n| Transistor | Configuration | Key small‑signal params |\n|------------|---------------|------------------------|\n| **M₁** | Common‑gate | \\(g_{m1}, g_{mb1}, r_{o1}\\) |\n| **M₂** | Common‑source | \\(g_{m2}, r_{o2}\\) (body at ground ⇒ \\(g_{mb2}=0\\)) |\n\nThe small‑signal nodal equations are (using \\(v_z,v_x,v_{out}\\) for AC voltages):\n\n### Node Z (source of M₁)\n\\[\ni_{in}= \\frac{v_z}{R_F}+i_{S1}\n\\]\n\nWith \\(v_{gs1}=-v_z\\) and \\(v_{bs1}=-v_z\\):\n\n\\[\ni_{in}=v_z\\!\\left(\\frac1{R_F}+g_{m1}+g_{mb1}+\\frac1{r_{o1}}\\right)-\\frac{v_x}{r_{o1}}\n\\tag{1}\n\\]\n\n### Node X (drain of M₁ / gate of M₂)\n\\[\n\\frac{v_x}{R_{D1}}+i_{D1}=0\n\\]\n\nwith \\(i_{D1}=-(g_{m1}+g_{mb1})v_z+\\dfrac{v_x-v_z}{r_{o1}}\\):\n\n\\[\nv_x\\!\\left(\\frac1{R_{D1}}+\\frac1{r_{o1}}\\right)\n= v_z\\!\\left(g_{m1}+g_{mb1}+\\frac1{r_{o1}}\\right)\n\\tag{2}\n\\]\n\n### Node V_out (drain of M₂)\n\\[\n\\frac{v_{out}}{R_{D2}}+g_{m2}v_x+\\frac{v_{out}}{r_{o2}}=0\n\\]\n\n\\[\n\\boxed{v_{out}=-g_{m2}\\,v_x\\,(R_{D2}\\parallel r_{o2})\n\\tag{3}}\n\\]\n\n---\n\n## 3. Transfer Function \\(v_{out}/i_{in}\\) (Transresistance \\(R_m\\))\n\nSolving (1)–(3):\n\nFrom (2):\n\\[\nv_x = v_z\\,\n\\frac{g_{m1}+g_{mb1}+1/r_{o1}}{1/R_{D1}+1/r_{o1}}\n\\]\n\nInsert into (3):\n\\[\nv_{out}= -g_{m2}(R_{D2}\\parallel r_{o2})\\,\nv_z\\,\n\\frac{g_{m1}+g_{mb1}+1/r_{o1}}{1/R_{D1}+1/r_{o1}}\n\\]\n\nThen substitute \\(v_z\\) from (1). The exact result is\n\n\\[\n\\boxed{\n\\frac{v_{out}}{i_{in}}=\n-g_{m2}(R_{D2}\\parallel r_{o2})\\,\n\\frac{g_{m1}+g_{mb1}+1/r_{o1}}{(1/R_{D1}+1/r_{o1})\\,\n\\Bigl[\\frac1{R_F}+g_{m1}+g_{mb1}+\\frac1{r_{o1}}\n-\\frac{g_{m1}+g_{mb1}+1/r_{o1}}{r_{o1}(1/R_{D1}+1/r_{o1})}\\Bigr]}\n}\n\\]\n\n### Practical Approximation (\\(r_{o1},r_{o2}\\to\\infty\\), \\(g_{mb1}=0\\))\n\nThis is the usual case for long‑channel devices:\n\n\\[\nv_z \\approx \\frac{i_{in}}{g_{m1}+1/R_F},\\qquad\nv_x \\approx -g_{m1}R_{D1}\\,v_z,\\qquad\nv_{out}\\approx -g_{m2}R_{D2}\\,v_x\n\\]\n\nHence\n\n\\[\n\\boxed{\nR_m \\equiv \\frac{v_{out}}{i_{in}}\n\\approx \\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{g_{m1}+1/R_F}\n= g_{m2}R_{D1}R_{D2}\\,\n\\frac{1}{1+\\dfrac{1}{g_{m1}R_F}}\n}\n\\]\n\nIf the source degeneration is strong (\\(g_{m1}R_F\\gg 1\\)):\n\n\\[\n\\boxed{R_m \\;\\approx\\; g_{m2}\\,R_{D1}\\,R_{D2}}\n\\]\n\nThe circuit therefore behaves as a **high‑gain current‑to‑voltage converter** with transresistance on the order of \\(g_{m2}R_{D1}R_{D2}\\).\n\n---\n\n## 4. Input and Output Resistances\n\n**Input resistance** (seen by \\(I_{in}\\)):\n\nWith \\(r_{o1}\\to\\infty\\):\n\\[\n\\boxed{R_{in}\\equiv\\frac{v_z}{i_{in}}\\approx R_F\\parallel\\frac1{g_{m1}}}\n\\]\n\nIf \\(g_{m1}R_F\\gg 1\\), then \\(R_{in}\\approx 1/g_{m1}\\) (the intrinsic source resistance of M₁).\n\n**Output resistance** (looking into \\(V_{out}\\) with \\(i_{in}=0\\)):\n\nSince there is no feedback path from \\(V_{out}\\) back to the left stage,\n\\[\n\\boxed{R_{out}\\approx R_{D2}\\parallel r_{o2}}\n\\]\n\n---\n\n## 5. Summary of Key Properties\n\n| Parameter | Expression (approx.) |\n|-----------|----------------------|\n| **Topology** | CG stage (M₁) → CS stage (M₂) |\n| **Input resistance** | \\(R_F \\parallel 1/g_{m1}\\) |\n| **Voltage gain** \\(v_x/v_z\\) | \\(-g_{m1}R_{D1}\\) |\n| **Voltage gain** \\(v_{out}/v_x\\) | \\(-g_{m2}R_{D2}\\) |\n| **Overall transresistance** \\(v_{out}/i_{in}\\) | \\(\\displaystyle \\frac{g_{m1}g_{m2}R_{D1}R_{D2}}{g_{m1}+1/R_F}\\) |\n| **Output resistance** | \\(R_{D2}\\parallel r_{o2}\\) |\n\n* **R_F** provides negative feedback at the source of M₁: it stabilizes the DC bias point, lowers the input resistance to \\(\\approx 1/g_{m1}\\), and makes the overall gain depend mainly on the second stage (\\(g_{m2}R_{D1}R_{D2}\\)).\n* **R_D1** serves a dual role: it sets the gain of the first stage and determines the gate bias of M₂.\n* The circuit is open‑loop from input to output (except for the local feedback through \\(r_{o1}\\)), so the output resistance is simply that of the CS stage.\n\nIf specific numerical values for \\(k, V_{th}, R_D, R_F, I_{in}\\) are given, substitute them into the DC system (Section 1) to find the bias point \\((V_Z,V_X,V_{out})\\), then compute \\(g_{m1},g_{m2}\\) and insert into the gain formulas above.",
        "format": "markdown",
        "sha256": "6e1763263f6a6e8712c3dc3b35307a1df9fc1915848f79ffad04d7c745740769"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies M₁ as common-gate and M₂ as common-source, but misplaces R_F: it connects V_out back to the input node, not from the source node to ground. This misses the defining negative-feedback transimpedance topology and leads to incorrect gain and output-resistance conclusions.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 22348,
        "total_tokens": 24765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20036,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 22348,
        "total_tokens": 24765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20036,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit contains two MOSFETs arranged in a **cross‑coupled complementary pair** with current‑source biasing:\n\n| Element | Connection | Type (inferred) |\n|---|---|---|\n| $M_1$ | Drain $\\to V_{\\mathrm{out}}$, Source $\\to V_b$, Gate $\\to V_C$ | NMOS |\n| $M_2$ | Source $\\to V_{DD}$, Drain $\\to V_C$, Gate $\\to V_{\\mathrm{out}}$ | PMOS |\n| $I_1$ | $V_{DD}\\to V_{\\mathrm{out}}$ | DC bias current source |\n| $I_{\\mathrm{in}}$ | Ground $\\to V_C$ (up) | Signal / bias current |\n| $I_{\\mathrm{sink}}$ | $V_C\\to$ Ground (down) | DC bias current sink |\n| $V_b$ | Source terminal of $M_1$ | Bias / output node |\n| $V_C$ | Drain of $M_2$ and gate of $M_1$ | Internal node |\n\nThe two transistors form a feedback loop: $V_{\\mathrm{out}}$ controls $M_2$, whose drain sets $V_C$, and $V_C$ controls $M_1$, which carries the current $I_1$ from $V_{\\mathrm{out}}$ to $V_b$.\n\n---\n\n## 1. DC Analysis (Operating Point)\n\nApply KCL at the two high‑impedance nodes ($I_{G1}=I_{G2}=0$).\n\n### At $V_{\\mathrm{out}}$\n$$I_1 = I_{D1} \\quad\\Longrightarrow\\quad \\boxed{I_{D1}=I_1}$$\n\n### At $V_C$\n$$I_{D2}+I_{\\mathrm{in}} = I_{\\mathrm{sink}} \\quad\\Longrightarrow\\quad \\boxed{I_{D2}=I_0-I_{\\mathrm{in}}}$$\nwhere $I_0\\equiv I_{\\mathrm{sink}}$ is the bias current.\n\n### Transistor equations (saturation, $\\lambda\\approx 0$)\n\n**For $M_1$ (NMOS):**\n$$I_{D1}=\\frac{1}{2}k_n\\bigl(V_{GS1}-V_{\\mathrm{thn}}\\bigr)^2\n=\\frac{1}{2}k_n\\bigl(V_C-V_b-V_{\\mathrm{thn}}\\bigr)^2$$\nwith $k_n=\\mu_n C_{\\mathrm{ox}}(W/L)_1$.\n\nSolving for $V_C$:\n$$\\boxed{V_C = V_b+V_{\\mathrm{thn}}+\\sqrt{\\frac{2I_1}{k_n}}}$$\nThus **$V_C$ is constant** (independent of $I_{\\mathrm{in}}$) as long as $M_1$ stays in saturation.\n\n**For $M_2$ (PMOS):**\n$$|I_{D2}|=\\frac{1}{2}k_p\\bigl(V_{SG2}-|V_{\\mathrm{thp}}|\\bigr)^2\n=\\frac{1}{2}k_p\\bigl(V_{DD}-V_{\\mathrm{out}}-|V_{\\mathrm{thp}}|\\bigr)^2$$\nwith $k_p=\\mu_p C_{\\mathrm{ox}}(W/L)_2$.\n\nSolving for $V_{\\mathrm{out}}$:\n$$\\boxed{V_{\\mathrm{out}} = V_{DD}-|V_{\\mathrm{thp}}|\n-\\sqrt{\\frac{2|I_0-I_{\\mathrm{in}}|}{k_p}}}$$\n\nSo $V_{\\mathrm{out}}$ is a **square‑root (nonlinear) function of the input current** $I_{\\mathrm{in}}$.\n\n### Saturation conditions\n- $M_1$: $\\;V_{\\mathrm{out}}-V_b \\ge V_C-V_b-V_{\\mathrm{thn}} = \\sqrt{2I_1/k_n}$\n- $M_2$: $\\;V_{DD}-V_C \\ge \\bigl(V_{DD}-V_{\\mathrm{out}}-|V_{\\mathrm{thp}}|\\bigr)$\n\nIf these hold, both devices are in saturation and the formulas above are valid.\n\n---\n\n## 2. Small‑Signal Analysis\n\nDefine the small‑signal parameters at the operating point:\n$$g_{m1}=k_n\\bigl(V_{GS1}-V_{\\mathrm{thn}}\\bigr)=\\sqrt{2k_n I_1},\\qquad\ng_{m2}=k_p\\bigl(V_{SG2}-|V_{\\mathrm{thp}}|\\bigr)=\\sqrt{2k_p|I_{D2}|}$$\n$$r_{o1}=\\frac{1}{\\lambda_1 I_1},\\qquad r_{o2}=\\frac{1}{\\lambda_2 |I_{D2}|}$$\n\nThe AC equivalent (with $V_{DD},V_b\\to$ ground) is a **cross‑coupled pair**:\n\n- $M_1$: current source $g_{m1}v_c$ in parallel with $r_{o1}$ between $v_{\\mathrm{out}}$ and ground.\n- $M_2$: current source $g_{m2}v_{\\mathrm{out}}$ in parallel with $r_{o2}$ between $v_c$ and ground.\n\n### KCL in the AC domain\nAt $V_{\\mathrm{out}}$:\n$$g_{m1}v_c+\\frac{v_{\\mathrm{out}}}{r_{o1}}=0\n\\;\\Longrightarrow\\;\n\\boxed{v_c=-\\frac{v_{\\mathrm{out}}}{g_{m1}r_{o1}}}$$\n\nAt $V_C$ (with input $i_{\\mathrm{in}}$):\n$$g_{m2}v_{\\mathrm{out}}+\\frac{v_c}{r_{o2}}=i_{\\mathrm{in}}$$\n\nSubstituting $v_c$:\n$$v_{\\mathrm{out}}\\Bigl[g_{m2}-\\frac{1}{g_{m1}r_{o1}r_{o2}}\\Bigr]=i_{\\mathrm{in}}$$\n\n### Transimpedance gain ($Z_T=v_{\\mathrm{out}}/i_{\\mathrm{in}}$)\n$$\\boxed{\\frac{v_{\\mathrm{out}}}{i_{\\mathrm{in}}}\n=\\frac{1}{g_{m2}\\Bigl[1-\\dfrac{1}{g_{m1}g_{m2}r_{o1}r_{o2}}\\Bigr]}\n\\approx \\frac{1}{g_{m2}}}$$\nThe approximation is excellent because $g_{m1}r_{o1},g_{m2}r_{o2}\\gg 1$ (intrinsic gains are typically 20–100).\n\n**Interpretation:** The circuit acts as a **current‑to‑voltage converter** with gain $\\approx 1/g_{m2}$. An increase in $I_{\\mathrm{in}}$ reduces $|I_{D2}|$, lowering $V_{SG2}$ and therefore **raising** $V_{\\mathrm{out}}$ (positive gain).\n\n### Output resistance ($R_{\\mathrm{out}}$ at $V_{\\mathrm{out}}$)\nApply a test current $i_x$ with $i_{\\mathrm{in}}=0$:\n$$R_{\\mathrm{out}}=\\frac{v_x}{i_x}\n=\\frac{1}{\\dfrac{1}{r_{o1}}-g_{m1}g_{m2}r_{o2}}\n=\\frac{r_{o1}}{1-g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\nIf the loop gain $\\boxed{g_{m1}g_{m2}r_{o1}r_{o2}>1}$, then $\\boxed{R_{\\mathrm{out}}<0}$: the cross‑coupled pair exhibits **negative resistance**. This is the classic behavior of a CMOS latch/Schmitt‑trigger core.\n\n### Input resistance (looking into $V_C$)\nWith $v_{\\mathrm{out}}$ driven through the loop:\n$$R_{\\mathrm{in},C}\\approx \\frac{1}{g_{m2}}+\\frac{1}{g_{m1}g_{m2}r_{o2}}\\approx \\frac{1}{g_{m2}}$$\n\n---\n\n## 3. Summary of Key Results\n\n| Quantity | Expression (symbolic) |\n|---|---|\n| $I_{D1}$ | $I_1$ (fixed) |\n| $I_{D2}$ | $I_{\\mathrm{sink}}-I_{\\mathrm{in}}$ |\n| $V_C$ | $V_b+V_{\\mathrm{thn}}+\\sqrt{2I_1/k_n}$ (constant) |\n| $V_{\\mathrm{out}}$ | $V_{DD}-|V_{\\mathrm{thp}}|-\\sqrt{2|I_{\\mathrm{sink}}-I_{\\mathrm{in}}|/k_p}$ |\n| Small‑signal gain | $v_{\\mathrm{out}}/i_{\\mathrm{in}}\\approx 1/g_{m2}$ |\n| Output resistance | $R_{\\mathrm{out}}\\approx r_{o1}/(1-g_{m1}g_{m2}r_{o1}r_{o2})$ (can be negative) |\n| $V_C$ (AC) | $v_c\\approx -v_{\\mathrm{out}}/(g_{m1}r_{o1})$ |\n\n**Physical picture:** $M_1$ fixes the gate bias $V_C$ and forces a constant current $I_1$. $M_2$ then acts as a voltage‑controlled current source whose current is set by $I_{\\mathrm{in}}$; because its gate is tied back to $V_{\\mathrm{out}}$, the required $V_{SG2}$ (hence $V_{\\mathrm{out}}$) adjusts automatically. The result is a nonlinear $I_{\\mathrm{in}}\\to V_{\\mathrm{out}}$ transfer characteristic with a small‑signal transimpedance of about $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "18cc99f007fe97dcdfdbbe2bdd7ef4b2855c214506b95edc8275287fddf8caf8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as a PMOS driven by Vout and gives the approximate transimpedance 1/gm2. However, it misplaces M1’s source and gate, so it misses the common-gate input path and derives the wrong input resistance and negative output resistance; much of the DC and small-signal analysis does not describe the actual circuit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 22423,
        "total_tokens": 24736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 22423,
        "total_tokens": 24736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit contains two MOSFETs, three DC current sources and two observable nodes ($V_{out}$ and $V_b$).\n\n| Element | Connection / Function |\n|---|---|\n| $M_2$ | **PMOS**, source $\\to V_{DD}$, drain $\\to$ node $X$ (the central black dot), **gate $\\to$ drain** (diode‑connected). |\n| $M_1$ | **NMOS**, drain $\\to V_{out}$, source $\\to$ node $X$, **gate $\\to$ drain** (diode‑connected), body $\\to V_b$. |\n| $I_1$ | Current source $V_{DD}\\to V_{out}$ (supplies the drain current of $M_1$). |\n| $I_{in}$ | Current source ground $\\to$ node $X$ (enters the source node). |\n| $I_0$ | Current source node $X \\to$ ground (the downward arrow, call it $I_0$). |\n| $V_b$ | Body (substrate/well) bias of $M_1$. |\n\nBecause both transistors have their gates tied to their drains, they are **always in saturation** (provided they are turned on).\n\n---\n\n### 1. KCL at the intermediate node $X$ (call its voltage $V_X$)\n\nCurrent entering $X$:\n* From $M_2$: $I_{D2}$\n* From $I_{in}$: $I_{in}$\n\nCurrent leaving $X$:\n* Through $M_1$ (source): $I_{D1}$\n* Through $I_0$: $I_0$\n\n$$I_{D2}+I_{in}=I_{D1}+I_0 \\quad\\Longrightarrow\\quad \\boxed{I_{D2}=I_{D1}+I_0-I_{in}}$$\n\nBut $I_1$ is applied directly to the drain of $M_1$, and gate current is zero, so\n\n$$\\boxed{I_{D1}=I_1}$$\n\nHence\n\n$$\\boxed{I_{D2}=I_1+I_0-I_{in}}$$\n\n*(For physical consistency we need $I_{D2}>0 \\Rightarrow I_1+I_0>I_{in}$.)*\n\n---\n\n### 2. Transistor $I$–$V$ relations (saturation, $\\lambda\\approx 0$)\n\n**NMOS $M_1$** (source at $V_X$, drain/gate at $V_{out}$):\n\n$$I_{D1}=\\frac{1}{2}k_n\\bigl(V_{GS1}-V_{thn}\\bigr)^2\n      =\\frac{1}{2}k_n\\bigl(V_{out}-V_X-V_{thn}\\bigr)^2$$\n\nBecause $V_{DS1}=V_{GS1}=V_{out}-V_X$, the saturation condition $V_{DS}\\ge V_{GS}-V_{th}$ is automatically satisfied.\n\nSolving for the gate–source drop:\n\n$$V_{out}-V_X = V_{thn}+\\sqrt{\\frac{2I_1}{k_n}} \\tag{1}$$\n\n**Body effect on $M_1$:**  \nSince the body is at $V_b\\neq V_X$ (source), the threshold voltage is modified:\n\n$$V_{thn}=V_{th0}+\\gamma\\Bigl(\\sqrt{|2\\phi_F+V_{SB}|}-\\sqrt{|2\\phi_F|}\\Bigr)$$\n\nwith $V_{SB}=V_X-V_b$ (for $V_X>V_b$). Thus **$V_b$ directly shifts $V_{thn}$ and therefore $V_{out}$**.\n\n---\n\n**PMOS $M_2$** (source at $V_{DD}$, drain/gate at $V_X$):\n\n$$I_{D2}=\\frac{1}{2}|k_p|\\bigl(V_{SG2}-|V_{thp}|\\bigr)^2\n      =\\frac{1}{2}|k_p|\\bigl(V_{DD}-V_X-|V_{thp}|\\bigr)^2$$\n\nAgain $V_{SD2}=V_{SG2}$, so saturation is guaranteed.\n\nSolving for the source–drain drop:\n\n$$V_{DD}-V_X = |V_{thp}|+\\sqrt{\\frac{2I_{D2}}{|k_p|}}\n            = |V_{thp}|+\\sqrt{\\frac{2\\bigl(I_1+I_0-I_{in}\\bigr)}{|k_p|}} \\tag{2}$$\n\n---\n\n### 3. Solving for the node voltages\n\nFrom (2):\n\n$$\\boxed{V_X = V_{DD}-|V_{thp}|-\\sqrt{\\frac{2\\bigl(I_1+I_0-I_{in}\\bigr)}{|k_p|}}}$$\n\nSubstitute $V_X$ into (1):\n\n$$\\boxed{V_{out}=V_X+V_{thn}(V_b)+\\sqrt{\\frac{2I_1}{k_n}}}$$\n\nor, written explicitly,\n\n$$\\boxed{V_{out}=V_{DD}-|V_{thp}|-\\sqrt{\\frac{2(I_1+I_0-I_{in})}{|k_p|}}\n      +V_{thn}(V_b)+\\sqrt{\\frac{2I_1}{k_n}}}$$\n\n---\n\n### 4. Operating conditions (all in saturation)\n\n| Transistor | Condition | Result |\n|---|---|---|\n| $M_1$ (NMOS) | $V_{GS1}>V_{thn}$ | $V_{out}>V_X+V_{thn}$ (true by (1)) |\n| $M_2$ (PMOS) | $V_{SG2}>|V_{thp}|$ | $V_X<V_{DD}-|V_{thp}|$ (true by (2)) |\n\nIf $I_1+I_0\\le I_{in}$, then $I_{D2}\\le 0$ and $M_2$ cuts off; the circuit then collapses to a single transistor $M_1$ carrying $I_1$.\n\n---\n\n### 5. Summary of the circuit function\n\n* The stack $M_2$–$M_1$ acts as a **voltage divider** between $V_{DD}$ and $V_{out}$, with the intermediate node $X$ serving as a current summing point.\n* $I_1$ sets the current (and hence the $V_{GS}$ drop) of $M_1$.\n* $I_{in}$ and $I_0$ determine how much current is shared with $M_2$.\n* **$V_b$ controls the body effect of $M_1$**, allowing $V_{out}$ to be tuned without changing the currents—this is the classic use of a body‑biased transistor in analog bias generators.\n\nIf a **small‑signal** analysis is required, replace each transistor by its saturation small‑signal model ($g_m v_{gs}$, $r_o v_{ds}$) and apply the test source $i_{in}$ at node $X$; the gains $v_{out}/i_{in}$ and $v_b$ (body) effects follow directly from the linearized versions of (1) and (2).",
        "format": "markdown",
        "sha256": "4ef973157f9972598190f9584c57f748b1492aff619c0b6712bdfcd4d0f37b8c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads both gate connections: M1 is common-gate with its gate at Vb, and M2’s gate is driven by Vout. Treating both devices as diode-connected misses the feedback loop and the circuit’s low-input-resistance/current-buffer behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 22791,
        "total_tokens": 25104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 22791,
        "total_tokens": 25104,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21160,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\nThe circuit contains two NMOS transistors, \\(M_1\\) and \\(M_2\\), whose sources are tied together at node \\(X\\).\n\n* \\(M_1\\): drain = \\(V_{\\mathrm{out}}\\), gate = \\(V_b\\), source = \\(V_X\\)  \n* \\(M_2\\): drain = \\(V_{DD}\\) (AC ground), gate = \\(V_{\\mathrm{out}}\\), source = \\(V_X\\)  \n* Load on \\(M_1\\): ideal current source \\(I_1\\) from \\(V_{DD}\\) to \\(V_{\\mathrm{out}}\\)  \n* Source node \\(X\\) is connected to ground through a bias current sink \\(I_{SS}\\) and through the signal current source \\(I_{\\mathrm{in}}\\) (arrow up)  \n* \\(V_b\\) is a DC bias (with a possible small‑signal component \\(v_b\\))\n\nBecause both drains are at (or near) the supply and the sources share node \\(X\\), \\(M_1\\) and \\(M_2\\) form a **differential pair with a floating source node**.  \nThe gate of \\(M_2\\) is fed back from \\(V_{\\mathrm{out}}\\), so the loop\n\n\\[\nV_{\\mathrm{out}}\\;\\to\\;V_{GS2}\\;\\to\\;I_{D2}\\;\\to\\;V_X\\;\\to\\;I_{D1}\\;\\to\\;V_{\\mathrm{out}}\n\\]\n\nis closed.  The circuit therefore behaves as a **feedback transimpedance stage**: it converts the input current \\(I_{\\mathrm{in}}\\) into a voltage \\(V_{\\mathrm{out}}\\) while reproducing the gate bias \\(V_b\\) at the output with unity gain.\n\nBelow is the full DC and small‑signal analysis.\n\n---\n\n## 1. DC operating point\n\nAssume both transistors are in saturation and neglect channel‑length modulation (\\(\\lambda\\approx 0\\)) for the bias calculation.\n\n\\[\nI_{D1}=I_1=\\frac{1}{2}k_1\\bigl(V_{GS1}-V_{TH1}\\bigr)^2\n\\qquad\\Longrightarrow\\qquad\nV_{GS1}=V_{TH1}+\\sqrt{\\frac{2I_1}{k_1}}\n\\]\n\nSince \\(V_{GS1}=V_b-V_X\\),\n\n\\[\n\\boxed{V_X = V_b-V_{TH1}-\\sqrt{\\frac{2I_1}{k_1}}\\equiv V_b-V_{OV1}}\n\\tag{1}\n\\]\n\nwhere \\(V_{OV1}=\\sqrt{2I_1/k_1}\\) is the overdrive of \\(M_1\\).\n\nKCL at node \\(X\\):\n\n\\[\nI_{D1}+I_{D2}+I_{\\mathrm{in,DC}} = I_{SS}\n\\;\\;\\Longrightarrow\\;\\;\nI_{D2}=I_{SS}-I_1-I_{\\mathrm{in,DC}}\n\\]\n\nHence\n\n\\[\nV_{GS2}=V_{TH2}+\\sqrt{\\frac{2I_{D2}}{k_2}}\n\\]\n\nand because \\(V_{GS2}=V_{\\mathrm{out}}-V_X\\),\n\n\\[\n\\boxed{V_{\\mathrm{out}} = V_X+V_{TH2}+\\sqrt{\\frac{2I_{D2}}{k_2}}\n      = V_b -V_{OV1}+V_{TH2}-V_{TH1}+\\sqrt{\\frac{2I_{D2}}{k_2}} }\n\\tag{2}\n\\]\n\nIf \\(V_{TH1}=V_{TH2}=V_{TH}\\) this simplifies to\n\n\\[\nV_{\\mathrm{out}} \\approx V_b -V_{OV1}+\\sqrt{\\frac{2I_{D2}}{k_2}} .\n\\]\n\nThe saturation conditions are\n\n\\[\nV_{DS1}=V_{\\mathrm{out}}-V_X > V_{OV1},\\qquad\nV_{DS2}=V_{DD}-V_X > V_{OV2}.\n\\]\n\n---\n\n## 2. Small‑signal model\n\nFor AC analysis:\n* \\(V_{DD}\\) and ground are AC ground.\n* The ideal current sources \\(I_1\\) and \\(I_{SS}\\) are open circuits.\n* Apply a small signal current \\(i_{\\mathrm{in}}\\) at node \\(X\\) and a small signal voltage \\(v_b\\) at the gate of \\(M_1\\).\n\nUse the standard NMOS small‑signal model for each transistor (including body effect, since the bodies are at ground):\n\n\\[\n\\begin{aligned}\ni_{d1} &= g_{m1}(v_{g1}-v_x)+g_{mb1}(0-v_x)+\\frac{v_{out}-v_x}{r_{o1}} \\\\\n        &= g_{m1}(v_b-v_x)-g_{mb1}v_x+\\frac{v_{out}-v_x}{r_{o1}} \\\\[4pt]\ni_{d2} &= g_{m2}(v_{out}-v_x)-g_{mb2}v_x+\\frac{0-v_x}{r_{o2}} \\\\\n        &= g_{m2}(v_{out}-v_x)-g_{mb2}v_x-\\frac{v_x}{r_{o2}}\n\\end{aligned}\n\\]\n\nwhere \\(v_x\\) is the AC voltage at node \\(X\\).\n\n### 2.1 KCL at \\(V_{\\mathrm{out}}\\)\n\nThe only AC path leaving \\(V_{\\mathrm{out}}\\) is through \\(M_1\\). Because there is no other AC load,\n\n\\[\n\\boxed{i_{d1}=0}\n\\tag{3}\n\\]\n\nSolving (3) for \\(v_{out}\\):\n\n\\[\nv_{out}=v_x\\Bigl[1+(g_{m1}+g_{mb1})r_{o1}\\Bigr]-g_{m1}r_{o1}v_b .\n\\tag{4}\n\\]\n\nIf channel‑length modulation is negligible (\\(r_{o1}\\to\\infty\\)), (4) gives \\(v_x=v_b\\) and therefore\n\n\\[\n\\boxed{v_{out}\\approx v_b \\quad (r_{o1}\\to\\infty)} .\n\\tag{5}\n\\]\n\nThus the bias voltage \\(V_b\\) is reproduced at the output with **unity voltage gain**.\n\n### 2.2 KCL at node \\(X\\)\n\nWith \\(i_{d1}=0\\) and the tail source open,\n\n\\[\ni_{d2}=i_{\\mathrm{in}} .\n\\tag{6}\n\\]\n\nInsert (4) into the expression for \\(i_{d2}\\):\n\n\\[\ni_{\\mathrm{in}} = v_x\\Bigl[g_{m2}(g_{m1}+g_{mb1})r_{o1}-g_{mb2}-\\frac{1}{r_{o2}}\\Bigr]\n                 -v_b\\,g_{m2}g_{m1}r_{o1}.\n\\]\n\nSolving for \\(v_x\\) and substituting back into (4) yields the exact linear relation\n\n\\[\n\\boxed{v_{out}\\approx v_b+\\frac{i_{\\mathrm{in}}}{g_{m2}}}\n\\tag{7}\n\\]\n\nwhere the correction terms are of order \\(1/(g_m r_o)\\).  \n**Equation (7) is the central result:** the circuit adds the voltage \\(v_b\\) and the current‑to‑voltage term \\(i_{\\mathrm{in}}/g_{m2}\\).\n\n---\n\n## 3. Key small‑signal parameters\n\nDefine the intrinsic gain of \\(M_1\\) as \\(A_1=(g_{m1}+g_{mb1})r_{o1}\\).\n\n### Transimpedance gain\n\\[\n\\boxed{R_m \\equiv \\frac{v_{out}}{i_{\\mathrm{in}}}\\Big|_{v_b=0}\n      =\\frac{1+(g_{m1}+g_{mb1})r_{o1}}\n             {g_{m2}(g_{m1}+g_{mb1})r_{o1}-g_{mb2}-1/r_{o2}}\n      \\;\\approx\\;\\frac{1}{g_{m2}} }\n\\tag{8}\n\\]\n\n### Input resistance (looking into node \\(X\\))\n\\[\n\\boxed{R_{\\mathrm{in}} \\equiv \\frac{v_x}{i_{\\mathrm{in}}}\\Big|_{v_b=0}\n      =\\frac{1}{g_{m2}(g_{m1}+g_{mb1})r_{o1}-g_{mb2}-1/r_{o2}}\n      \\;\\approx\\;\\frac{1}{g_{m1}g_{m2}r_{o1}} }\n\\tag{9}\n\\]\n\nThe input resistance is very small (\\(\\sim 1/g_m^2r_o\\)), which is characteristic of feedback‑reduced impedance.\n\n### Output resistance\nApply a test voltage \\(v_t\\) at \\(V_{\\mathrm{out}}\\) with \\(i_{\\mathrm{in}}=0\\) and \\(v_b=0\\). Solving the two KCL equations gives\n\n\\[\n\\boxed{R_{\\mathrm{out}} \\equiv \\frac{v_t}{i_t}\n      =\\frac{g_{m1}+g_{m2}+1/r_{o1}+1/r_{o2}}\n             {g_{m1}g_{m2}-1/(r_{o1}r_{o2})}\n      \\;\\approx\\;\\frac{1}{g_{m1}}+\\frac{1}{g_{m2}} }\n\\tag{10}\n\\]\n\nIf \\(g_{m1}=g_{m2}=g_m\\), then \\(R_{\\mathrm{out}}\\approx 2/g_m\\).\n\n---\n\n## 4. Summary of circuit behavior\n\n| Quantity | Exact expression | Approximation (\\(g_mr_o\\gg1\\)) |\n|----------|------------------|------------------------------|\n| DC bias \\(V_X\\) | \\(V_b-V_{TH}-\\sqrt{2I_1/k_1}\\) | same |\n| DC bias \\(V_{\\mathrm{out}}\\) | Eq. (2) | same |\n| Voltage gain \\(v_{out}/v_b\\) | \\(\\approx 1\\) | **1** |\n| Transimpedance \\(v_{out}/i_{\\mathrm{in}}\\) | Eq. (8) | **\\(1/g_{m2}\\)** |\n| Input resistance \\(R_{\\mathrm{in}}\\) | Eq. (9) | **\\(1/(g_{m1}g_{m2}r_{o1})\\)** |\n| Output resistance \\(R_{\\mathrm{out}}\\) | Eq. (10) | **\\(1/g_{m1}+1/g_{m2}\\)** |\n\n**Physical interpretation:**  \n\\(M_1\\) is the “signal” transistor; its drain current is fixed by \\(I_1\\), so its gate‑source voltage (and hence \\(V_X\\)) is set by \\(V_b\\).  Any change in \\(V_b\\) shifts \\(V_X\\) and therefore shifts \\(V_{\\mathrm{out}}\\) by the same amount (gain ≈ 1).\n\n\\(M_2\\) closes the feedback loop: a change in \\(V_{\\mathrm{out}}\\) changes \\(V_{GS2}\\), which changes \\(I_{D2}\\) and forces \\(V_X\\) to adjust until KCL at \\(X\\) is satisfied.  Because the loop gain is \\(\\approx g_{m2}(g_{m1}r_{o1})\\gg 1\\), the input impedance at \\(X\\) is crushed to a very low value, and the current \\(i_{\\mathrm{in}}\\) is converted to a voltage with the simple factor \\(1/g_{m2}\\).\n\nHence the circuit functions as a **low‑input‑impedance current‑to‑voltage converter summed with a DC level shifter** (\\(V_b\\)):\n\n\\[\n\\boxed{V_{\\mathrm{out}} \\;\\approx\\; V_b \\;+\\; \\frac{I_{\\mathrm{in}}}{g_{m2}} \\;+\\; \\mathrm{DC\\;offset}}\n\\]\n\nThis is the complete analysis of the shown circuit.",
        "format": "markdown",
        "sha256": "569f48e4cea417ec657b78c87a76aa770369b02ea1b2345ceeba2ac2997e9db3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies the feedback loop and gives the low input resistance and approximately 1/gm2 transimpedance, but it misreads M2 as an NMOS with its source at the input node; M2 is the PMOS feedback device. Under the device-type rule, this earns 1.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 26654,
        "total_tokens": 28967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 26654,
        "total_tokens": 28967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nNo—making the three load capacitors \\(C_L\\) arbitrarily large does **not** destroy oscillation. It only makes the oscillation frequency arbitrarily low (\\(f\\propto 1/C_L\\)). Only in the ideal limit \\(C_L\\to\\infty\\) does AC feedback disappear and the circuit sit in its DC metastable point.\n\n---\n\n### 1.  Circuit model\n\nThe figure is a **3-stage ring oscillator**:\n\n* Three inverting amplifiers (gain \\(-A\\), output resistance \\(R\\))\n* Each stage loaded by \\(C_L\\) to ground\n* The output of stage 3 fed back to the input of stage 1\n\nThe transfer function of one stage is that of a single-pole amplifier:\n\n\\[\n\\frac{V_{k+1}}{V_k}= \\frac{-A}{1+sRC_L}\n\\]\n\nSo the loop gain is\n\n\\[\nT(s)=\\left[\\frac{-A}{1+sRC_L}\\right]^3\n      =\\frac{-A^3}{(1+sRC_L)^3}\n\\]\n\n---\n\n### 2.  Barkhausen conditions\n\nSet \\(s=j\\omega\\) and require \\(T(j\\omega)=1\\).\n\n#### Phase condition\nThe inverters contribute \\(-180^\\circ\\) each (\\(-540^\\circ\\) total).  \nThe RC loads contribute \\(-3\\arctan(\\omega RC_L)\\).\n\nWe need the total phase to be a multiple of \\(360^\\circ\\):\n\n\\[\n-540^\\circ -3\\arctan(\\omega RC_L) = -720^\\circ\n\\;\\;\\Longrightarrow\\;\\;\n3\\arctan(\\omega RC_L)=180^\\circ\n\\]\n\n\\[\n\\boxed{\\;\\omega RC_L = \\tan 60^\\circ = \\sqrt{3}\\;}\n\\qquad\\Rightarrow\\qquad\n\\boxed{\\;\\omega_{\\rm osc}= \\frac{\\sqrt{3}}{RC_L}\\;}\n\\]\n\n#### Magnitude condition\nAt \\(\\omega RC_L=\\sqrt{3}\\):\n\n\\[\n|T|=\\frac{A^3}{\\bigl[1+(\\omega RC_L)^2\\bigr]^{3/2}}\n     =\\frac{A^3}{(1+3)^{3/2}}\n     =\\frac{A^3}{8}\n\\]\n\nFor oscillation to start (small-signal) we need \\(|T|\\ge 1\\):\n\n\\[\n\\boxed{\\;A \\ge 2\\;}\n\\]\n\nIf \\(A>2\\) the loop gain exceeds unity and the amplitude grows until nonlinearities reduce \\(A\\) to about 2.\n\n---\n\n### 3.  Role of \\(C_L\\)\n\nNotice that **\\(C_L\\) cancels in the gain condition** (\\(A\\ge 2\\)).  \nIt appears only in the frequency formula:\n\n\\[\nf_{\\rm osc}=\\frac{\\omega_{\\rm osc}}{2\\pi}\n            =\\frac{\\sqrt{3}}{2\\pi R C_L}\n\\]\n\n* If \\(C_L\\) is doubled, \\(f\\) is halved.\n* As \\(C_L\\to\\infty\\), \\(f_{\\rm osc}\\to 0\\) (the period becomes arbitrarily long).\n\nSo for **any finite** \\(C_L\\), however large, there is a well-defined oscillation frequency—just extremely low.\n\n---\n\n### 4.  What happens in the strict limit \\(C_L=\\infty\\)?\n\n* For any \\(\\omega\\neq 0\\): \\(Z_C = 1/j\\omega C_L = 0\\). The capacitors are AC shorts, so the AC loop gain is zero and the phase condition can never be met.\n* At \\(\\omega=0\\) (DC): the capacitors are open. The loop contains three inversions, so there is **no stable DC state** (the two digital states \\(H,L,H\\) and \\(L,H,L\\) are contradictory). The only DC solution is the metastable analog point where all three outputs sit near \\(V_{DD}/2\\).\n\nThus in the **idealized infinite-capacitance limit** there is no AC path to support oscillation, and the circuit remains stuck near that metastable point. But this is a singular limit.\n\n---\n\n### 5.  Conclusion\n\n\\[\n\\boxed{\\text{No—arbitrarily large (but finite) }C_L\\text{ do not stop oscillation.}}\n\\]\n\nThe circuit still satisfies \\(A>2\\) and oscillates at\n\n\\[\n\\omega \\approx \\frac{\\sqrt{3}}{R C_L}\\to 0\n\\]\n\nSo the period grows without bound, but the Barkhausen criterion remains satisfied. Only if \\(C_L\\) is literally infinite does the AC feedback vanish and oscillation cease.",
        "format": "markdown",
        "sha256": "8d864ea886ca6faa8900a5d7e0784ee5b592764a94696a50d024489917670cfa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal loading at all three nodes preserves oscillation for any finite capacitance while lowering frequency roughly as 1/CL. The small-signal phase and gain conditions are consistent with the golden solution; the strict-infinite-capacitance caveat does not undermine the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 8977,
        "total_tokens": 10180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 8977,
        "total_tokens": 10180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nNo. Making the three load capacitors \\(C_L\\) arbitrarily large does **not** kill the oscillation. It only makes the period arbitrarily long (\\(T\\propto C_L\\)). In the unrealistic limit \\(C_L\\to\\infty\\) the frequency goes to zero, but for any finite (however huge) value the loop still satisfies the Barkhausen conditions at a corresponding ultra‑low frequency.\n\n---\n\n### Why the circuit is a ring oscillator\n\nThe figure shows **three inverting stages** (inverters/amplifiers) connected in a loop, with the output of the third fed back to the input of the first. Each stage has a load capacitor \\(C_L\\) to ground.\n\nBecause there is an **odd number (3)** of inversions:\n\n* At DC the loop has negative feedback (phase shift \\(-180^\\circ\\)).\n* There is **no stable DC operating point** (except the metastable point where all three nodes sit exactly at the inverter threshold). Any tiny noise or power‑up imbalance is amplified.\n\nSo the circuit is a classic **3‑stage ring oscillator**.\n\n---\n\n### Small‑signal loop‑gain analysis\n\nModel each stage as an inverting voltage gain \\(-A\\) (with \\(A\\gg 1\\) near the threshold) in series with an output resistance \\(R\\), loaded by \\(C_L\\):\n\n\\[\n\\frac{V_{out}}{V_{in}} = \\frac{-A}{1+j\\omega RC_L}\n\\]\n\nFor three identical stages the open‑loop gain is\n\n\\[\nL(j\\omega)=\\left[\\frac{-A}{1+j\\omega RC_L}\\right]^3\n= \\frac{-A^3}{(1+j\\omega RC_L)^3}\n\\]\n\nWrite \\(L(j\\omega)=|L|e^{j\\phi}\\).\n\n**Phase condition** (\\(\\phi = 0 \\pmod{360^\\circ}\\) for positive feedback):\n\n\\[\n\\phi = -180^\\circ -3\\arctan(\\omega RC_L) = -360^\\circ\n\\;\\Longrightarrow\\;\n\\arctan(\\omega RC_L)=60^\\circ\n\\]\n\n\\[\n\\boxed{\\omega RC_L = \\sqrt{3}} \\quad\\Rightarrow\\quad\n\\omega_0 = \\frac{\\sqrt{3}}{RC_L}\n\\]\n\n**Magnitude condition** (\\(|L|\\ge 1\\)) at that frequency:\n\n\\[\n|1+j\\sqrt{3}| = 2 \\;\\Longrightarrow\\; |1+j\\omega_0 RC_L|^3 = 8\n\\]\n\n\\[\n|L(j\\omega_0)| = \\frac{A^3}{8}\n\\]\n\nFor any real inverter \\(A\\) is large (typically 10–100), so \\(A^3/8 \\gg 1\\).  \nThus **Barkhausen’s criterion is satisfied** whenever\n\n\\[\n\\omega = \\frac{\\sqrt{3}}{RC_L}.\n\\]\n\n---\n\n### What happens when \\(C_L\\) is huge?\n\nFrom \\(\\omega_0 = \\sqrt{3}/(RC_L)\\):\n\n\\[\nf_0 = \\frac{\\omega_0}{2\\pi} \\propto \\frac{1}{C_L}\n\\]\n\n* If \\(C_L\\) is doubled, the frequency is halved.\n* If \\(C_L\\to\\infty\\), then \\(\\omega_0\\to 0^+\\) and the period \\(T=2\\pi/\\omega_0 \\to \\infty\\).\n\n**Crucially**, the product \\(\\omega_0 R C_L = \\sqrt{3}\\) is **independent of \\(C_L\\)**. Therefore the magnitude \\(|L|=A^3/8\\) at the oscillation point does **not** change. The loop still has gain \\(>1\\) and the correct phase—just at an ever lower frequency.\n\nSo for **any finite** \\(C_L\\), no matter how large, there exists a valid oscillation mode. The circuit does not “turn off”; it simply slows down without bound.\n\n---\n\n### The limiting case \\(C_L = \\infty\\)\n\nIf the capacitances were literally infinite:\n\n* For any \\(\\omega\\neq 0\\) the impedance \\(1/j\\omega C_L = 0\\), so AC signals are shorted to ground and the AC loop gain is zero.\n* Only DC remains, where the total phase shift is \\(-180^\\circ\\) (not \\(0^\\circ\\)), so the Barkhausen condition is **not** met at DC.\n* The nodes are stuck (no \\(dV/dt = I/C\\) can occur).\n\nBut this is an unphysical limit. The question asks about **arbitrarily large** (finite) capacitors, and in that case \\(\\omega_0\\) is just arbitrarily close to zero but still nonzero.\n\n---\n\n### Practical caveat\n\nIn a real circuit, if \\(C_L\\) is so enormous that the period exceeds seconds, minutes, or hours, then **leakage currents, thermal noise, and power‑supply drift** will dominate. The circuit may appear to sit near the metastable point and never complete a visible cycle. But **theoretically** the oscillation condition is still satisfied; it has not “failed” in the circuit‑theory sense.\n\n---\n\n### Bottom line\n\n\\[\n\\boxed{\\text{No. The circuit still oscillates; } f\\approx \\frac{\\sqrt{3}}{2\\pi RC_L}\\to 0 \\text{ as } C_L\\to\\infty.}\n\\]\n\nThe capacitors set the **speed**, not the **existence**, of the oscillation. Only in the impossible limit of infinite capacitance does the AC path disappear and the circuit become stuck at its unstable DC bias point.",
        "format": "markdown",
        "sha256": "e0a31417caefdd6fd4dad74746e0811b0926f4d161ade72d854dea26901408f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors at all three nodes slow the ring without stopping it, and the small-signal phase analysis shows the oscillation frequency scales inversely with capacitance while the phase condition is unchanged.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 5388,
        "total_tokens": 6591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 5388,
        "total_tokens": 6591,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nNo. Making all three \\(C_L\\) arbitrarily large does **not** kill the oscillation. It only makes the period arbitrarily long (\\(f\\propto 1/C_L\\to 0\\)). The condition for oscillation depends on the inverter gain, not on the absolute value of \\(C_L\\).\n\n---\n\n### Why: Barkhausen analysis of the 3‑stage ring\n\nModel each inverter as a linear amplifier with DC gain \\(-A_0\\) (\\(A_0>0\\)) and output resistance \\(R\\), loaded by \\(C_L\\) to ground.\n\n**Single‑stage transfer function**\n\\[\nA(j\\omega)=\\frac{V_{out}}{V_{in}}=-\\frac{A_0}{1+j\\omega RC_L}\n\\]\n\n**Loop gain** (three stages in a loop with feedback)\n\\[\nL(j\\omega)=\\left[-\\frac{A_0}{1+j\\omega RC_L}\\right]^3\n=-\\frac{A_0^{\\,3}}{(1+j\\omega RC_L)^3}\n\\]\n\nSet \\(L(j\\omega)=1\\) (Barkhausen).\n\n#### 1. Phase condition\nWrite \\((1+j\\omega RC_L)=|D|e^{j\\phi}\\) with \\(\\phi=\\arctan(\\omega RC_L)\\).\n\nThe argument of \\(L\\) is \\(\\pi-3\\phi\\). For \\(0\\) (or \\(2\\pi\\)):\n\\[\n\\pi-3\\phi =0 \\;\\Rightarrow\\; \\phi=\\frac{\\pi}{3}=60^\\circ\n\\]\n\\[\n\\boxed{\\omega RC_L = \\tan 60^\\circ = \\sqrt{3}}\n\\quad\\Rightarrow\\quad\n\\boxed{\\omega = \\frac{\\sqrt{3}}{RC_L}}\n\\]\n\nSo the oscillation frequency is\n\\[\nf = \\frac{\\omega}{2\\pi}= \\frac{\\sqrt{3}}{2\\pi RC_L}\\propto \\frac{1}{C_L}.\n\\]\n\nAs \\(C_L\\to\\infty\\), \\(f\\to 0\\) — the period \\(T=2\\pi RC_L/\\sqrt{3}\\) becomes arbitrarily large, but **for any finite \\(C_L\\) there is a well‑defined nonzero \\(\\omega\\)**.\n\n#### 2. Magnitude condition\nAt \\(\\omega RC_L=\\sqrt{3}\\):\n\\[\n|1+j\\sqrt{3}| = \\sqrt{1+3}=2\n\\]\n\\[\n|L| = \\frac{A_0^{\\,3}}{2^3}= \\frac{A_0^{\\,3}}{8}\\ge 1\n\\;\\Rightarrow\\;\n\\boxed{A_0 \\ge 2}\n\\]\n\n**Crucially, this condition involves only \\(A_0\\); \\(C_L\\) has canceled out.**\n\n---\n\n### What happens when \\(C_L\\) is huge?\n\n- The pole of each stage is at \\(\\omega_0=1/(RC_L)\\to 0\\).\n- The required oscillation point is always at \\(\\omega = \\sqrt{3}\\,\\omega_0\\), so it slides downward with \\(\\omega_0\\).\n- At that point the capacitive impedance is\n  \\[\n  |Z_C|=\\frac{1}{\\omega C_L}=\\frac{R}{\\sqrt{3}},\n  \\]\n  which is **independent of \\(C_L\\)**. The circuit “scales” with \\(C_L\\) but its loop gain does not change.\n\nThus for **any** finite \\(C_L\\), no matter how large, if \\(A_0>2\\) the loop gain exceeds unity exactly at \\(\\omega=\\sqrt{3}/(RC_L)\\) and the circuit oscillates—just with an enormous period.\n\n---\n\n### The limiting case \\(C_L\\to\\infty\\) (strict)\n\nIf \\(C_L\\) is literally infinite:\n- \\(\\omega_0=0\\); the inverters have zero gain at every \\(\\omega\\neq 0\\).\n- The only remaining point is DC (\\(\\omega=0\\)), where the loop gain is \\(-A_0^{\\,3}\\) with a \\(180^\\circ\\) phase shift (not \\(360^\\circ\\)).\n- The nodes cannot change voltage (\\(I=C\\,dV/dt=0\\) for finite \\(I\\)), so dynamics freeze.\n\nBut “arbitrarily large” means **finite but unbounded**. In that regime the circuit never “fails”; it merely slows down without limit.\n\n---\n\n**Bottom line:** The oscillation criterion (\\(A_0\\ge 2\\)) is unaffected by \\(C_L\\). The frequency is \\(f\\approx \\sqrt{3}/(2\\pi RC_L)\\), so larger capacitors give a lower frequency, not a dead circuit. Only in the unphysical limit \\(C_L=\\infty\\) does motion stop entirely.",
        "format": "markdown",
        "sha256": "6639bc497df7d8b29cb0ba0f2184126729e07d238eac7710d1fd7dffa8e395cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal, finite capacitors on all three nodes preserve oscillation while lowering its frequency in proportion to 1/CL. The small-signal Barkhausen analysis correctly shows the phase condition and gain threshold are independent of CL; the infinite-capacitance caveat is consistent with the limiting case.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 7552,
        "total_tokens": 8755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 7552,
        "total_tokens": 8755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6461,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit: it is a **3-stage ring oscillator** where each inverter drives a load capacitor $C_L$ to ground.\n\n### 1. Effect on oscillation frequency\nThe delay per stage is approximately $\\tau \\approx R_{\\text{eq}}C_{\\text{tot}} \\approx R_{\\text{eq}}C_L$ (if $C_L$ dominates).  \nWith $N=3$ stages, the period is $T \\approx 6\\tau$, so\n\n$$f_{\\text{osc}} \\approx \\frac{1}{6R_{\\text{eq}}C_L} \\;\\propto\\; \\frac{1}{C_L}$$\n\n**Doubling $C_L$ halves the oscillation frequency** ($f_{\\text{osc}} \\to f_{\\text{osc}}/2$).\n\n### 2. Effect on power consumption\nThe dynamic power is $P \\approx N C_L V_{DD}^2 f_{\\text{osc}}$. Since $f_{\\text{osc}}\\propto 1/C_L$,\n\n$$P \\approx \\text{constant}$$\n\nThe power drawn stays **roughly unchanged**.\n\n### 3. Effect on phase noise\nFor a ring oscillator (Hajimiri-Lee / Leeson-type analysis), the single-sideband phase noise at an offset $\\Delta f$ scales as\n\n$$L(\\Delta f) \\propto \\frac{f_{\\text{osc}}^2}{P}$$\n\nBecause $P$ is constant and $f_{\\text{osc}}$ is halved:\n\n$$\\frac{L_{\\text{new}}}{L_{\\text{old}}} \\approx \\left(\\frac{1}{2}\\right)^2 = \\frac{1}{4}$$\n\nIn decibels:\n\n$$\\Delta L = 10\\log_{10}\\!\\left(\\frac{1}{4}\\right) \\approx \\mathbf{-6\\;dB}$$\n\n### Answer\n- The **oscillation frequency is approximately halved**.\n- The **power consumption stays about the same**.\n- Consequently, the **phase noise improves by about 6 dB** (it is reduced to one-quarter of its original power, or about 6 dB lower) at a given frequency offset.\n\n*(Physically: the stored energy per cycle $\\propto C_L$ doubles, while the noise contribution per transition remains comparable, giving a 6 dB better signal-to-noise ratio in the phase domain.)*",
        "format": "markdown",
        "sha256": "97a79caecbfd15f9ce890d9186bd36517de05796553504370cdd1cd240d6e9fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset, meeting the full-credit rule.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 19734,
        "total_tokens": 20934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 19734,
        "total_tokens": 20934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit: it is a **3-stage ring oscillator** where each inverter drives a load capacitor \\(C_L\\) to ground.\n\n### 1. Effect on oscillation frequency\nThe propagation delay of each inverter is \\(\\tau \\propto R_{\\text{eff}}C_L\\).  \nWith \\(N=3\\) stages, the period is \\(T \\approx 6\\tau \\propto C_L\\), so\n\n\\[\nf_{\\text{osc}} \\propto \\frac{1}{C_L}\n\\]\n\n**Doubling all three \\(C_L\\) halves the oscillation frequency** (\\(f_{\\text{osc}} \\to f_{\\text{osc}}/2\\)).\n\nThe average supply current is \\(I \\propto C_L V_{DD}f_{\\text{osc}}\\), so the **power consumption \\(P\\) stays essentially constant**.\n\n---\n\n### 2. Effect on phase noise\nUsing the Hajimiri–Lee / ring-oscillator phase-noise model, the single-sideband phase noise in the \\(1/f^2\\) region scales as\n\n\\[\nL(\\Delta f) \\propto \\frac{1}{q_{\\max}^2}\\frac{f_{\\text{osc}}^2}{\\Delta f^2}\n\\]\n\nwhere \\(q_{\\max}=C_L V_{\\text{swing}}\\) is the maximum charge swing per stage.\n\nBecause \\(P\\) is constant, \\(q_{\\max}\\propto C_L\\) and therefore\n\n\\[\nL \\propto \\frac{1}{C_L^2} \\propto f_{\\text{osc}}^2\n\\]\n\nSo when \\(C_L\\) is doubled:\n- \\(q_{\\max}\\) doubles \\(\\Rightarrow 1/q_{\\max}^2\\) becomes **1/4**\n- \\(f_{\\text{osc}}\\) is halved \\(\\Rightarrow f_{\\text{osc}}^2\\) becomes **1/4**\n\nBoth effects combine to reduce the phase-noise coefficient by a factor of **4** (the curve shifts downward uniformly in both the \\(1/f^3\\) and \\(1/f^2\\) regions).\n\nIn decibels:\n\n\\[\n\\Delta L = 10\\log_{10}\\!\\left(\\frac{1}{4}\\right) \\approx \\boxed{-6\\ \\text{dB}}\n\\]\n\n---\n\n### Answer\nDoubling the three capacitors **halves the oscillation frequency** and **improves (lowers) the phase noise by 6 dB** (i.e., it is divided by 4) at a given offset frequency, while the power consumption remains about the same.",
        "format": "markdown",
        "sha256": "12d2205ca2065dc4b35ec1f5b604b35c364c4ab981a568e48b055fe2e1fdcde1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion is correct: doubling the capacitors halves the frequency and lowers phase noise by about 6 dB at a fixed offset. But the derivation says both the charge and frequency-squared factors fall by four, which would imply a 16-fold reduction, not four; this makes the reasoning internally inconsistent.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 20825,
        "total_tokens": 22025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 20825,
        "total_tokens": 22025,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **3-stage ring oscillator** with load capacitors \\(C_L\\) at each inverter output.\n\n### 1. Effect on oscillation frequency\nThe delay per stage is roughly \\(t_d \\propto R_{\\text{eq}}C_L\\).  \nIf \\(C_L \\to 2C_L\\), the delay doubles, so the oscillation frequency is **halved**:\n\\[\nf_{\\text{osc}} \\to \\frac{f_{\\text{osc}}}{2}\n\\]\n\nThe dynamic power is \\(P \\approx N C_L V_{DD}^2 f_{\\text{osc}}\\). Since \\(C_L\\) doubles and \\(f_{\\text{osc}}\\) halves, the **power consumption stays about the same**.\n\n### 2. Effect on phase noise\nUsing the Hajimiri–Lee linear time-variant model (or Leeson’s scaling for ring oscillators), the single-sideband phase noise in the \\(1/f^2\\) region is\n\\[\nL(\\Delta f) \\propto \\frac{1}{q_{\\max}^2}\\left(\\frac{f_{\\text{osc}}}{\\Delta f}\\right)^2 \\propto \\frac{f_{\\text{osc}}^2}{P}\n\\]\nwhere \\(q_{\\max}=C_L V_{DD}\\) is the maximum charge swing on the capacitor.\n\n- **\\(q_{\\max}\\) doubles** \\(\\Rightarrow\\) the normalization factor \\(1/q_{\\max}^2\\) becomes **¼**.\n- **\\(f_{\\text{osc}}\\) halves** and \\(P\\) is constant \\(\\Rightarrow\\) the \\((f_{\\text{osc}}/\\Delta f)^2\\) term also becomes **¼**.\n\nTogether these give a factor of \\(1/4\\) in linear scale, i.e. **–6 dB**.\n\nThe same scaling applies to the \\(1/f^3\\) (flicker-noise) region because the ISF shape is unchanged (the transition time and the period scale together).\n\n### Answer\nDoubling the three capacitors **halves the oscillation frequency** and **improves (reduces) the phase noise by 6 dB** across the offset spectrum, while the power consumption remains approximately unchanged.",
        "format": "markdown",
        "sha256": "aa40c1ef5800112a4168e4ce26d257b54ea9c2febf8f186c5d94161f8bfc4f7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required factor-four (about 6 dB) reduction at a fixed offset and explicitly ties it to halving the oscillation frequency, satisfying the full-credit rule. The added qmax factor accounting is internally muddled, but its stated f0² scaling with unchanged power supports the central result.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 17788,
        "total_tokens": 18988,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 17788,
        "total_tokens": 18988,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit: **three inverters in a ring** (odd number ⇒ can oscillate) with feedback from inverter 3 back to inverter 1, and a load capacitor **C_L** from the node between inverter 1 and inverter 2 to ground.\n\n### Why it fails for arbitrarily large C_L\n\n1. **AC shunting / broken loop**  \n   For any oscillation frequency ω ≠ 0, the impedance of C_L is |Z| = 1/ωC_L. As C_L → ∞, Z → 0, so that node becomes an **AC ground**. The AC output of inverter 1 is shorted to ground; inverter 2 receives essentially no AC signal. The feedback loop is open for AC, so the Barkhausen criterion can never be met.\n\n2. **Loop-gain argument (finite but huge C_L)**  \n   Model each inverter with DC gain –A_i and a dominant pole ω_i ≈ 1/R_iC_i. The pole of stage 1 is\n   $$\\omega_1 \\approx \\frac{1}{R_{out1}(C_L + C_{in2})} \\propto \\frac{1}{C_L}$$\n   so ω₁ → 0 as C_L grows.\n\n   The loop transmission is\n   $$L(j\\omega) = \\frac{-A_1A_2A_3}{(1+j\\omega/\\omega_1)(1+j\\omega/\\omega_2)(1+j\\omega/\\omega_3)}$$\n\n   The phase condition for oscillation (3 inversions + pole delays = 360°) requires\n   $$\\arctan\\frac{\\omega}{\\omega_1}+\\arctan\\frac{\\omega}{\\omega_2}+\\arctan\\frac{\\omega}{\\omega_3}=180^\\circ$$\n   With ω₁ ≪ ω₂,ω₃ this occurs near ω ≈ √(ω₂ω₃). At that frequency:\n   $$|L| \\approx \\frac{A_1A_2A_3}{(\\omega/\\omega_1)\\sqrt{1+(\\omega/\\omega_2)^2}\\sqrt{1+(\\omega/\\omega_3)^2}} \\propto \\omega_1 \\propto \\frac{1}{C_L}$$\n\n   Hence |L| → 0 as C_L → ∞, far below the required |L| > 1. Even with infinite DC gain (A₁ → ∞), the product A₁ω₁ remains finite (≈ g_m1/C_L) and still collapses to zero.\n\n3. **Physical interpretation**  \n   At the frequency where stages 2 and 3 provide the needed 90° each, stage 1 is operating well above its pole and behaves like an integrator with gain ≈ g_m1/(ωC_L). Making C_L arbitrarily large drives this gain arbitrarily close to zero.\n\n### Conclusion\n**Yes.** If C_L becomes arbitrarily large, the AC signal at that node is shunted to ground, the loop gain drops below unity (to zero in the limit), and the circuit **fails to oscillate**. There is a practical upper limit on C_L for oscillation to occur.",
        "format": "markdown",
        "sha256": "b1ee1778f5db3343fc41d1dda24d7f75289310afc92d328d9ee88e1a33985e5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node creates a dominant pole and drives loop gain below unity, preventing the Barkhausen condition. The detailed frequency analysis is consistent with the essential mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 7364,
        "total_tokens": 8490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 7364,
        "total_tokens": 8490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit: **three inverters in a ring** (odd number ⇒ negative DC feedback, allowing oscillation) with a load capacitor **C_L tied from the node between inverter 1 and inverter 2 to ground**.\n\n### Why it fails for C_L → ∞\n\nFor a ring oscillator to start and sustain oscillation, the **Barkhausen criterion** must be met at some frequency ω:\n1. Total phase shift around the loop = 360° (180° from the three inversions + 180° from the RC pole delays)\n2. Loop gain |A₁A₂A₃| ≥ 1\n\nModel each inverter with DC gain –Aᵢ and a pole at ωₚᵢ ≈ 1/[R_out,i (C_in,i+1 + C_parasitic)]. Because C_L is on node 1:\n- **ωₚ₁ ≈ 1/[R_out,1(C_in,2 + C_L)] → 0** as C_L → ∞\n- ωₚ₂ and ωₚ₃ remain finite\n\nThe phase condition requires:\n$$\\arctan\\frac{\\omega}{\\omega_{p1}} + \\arctan\\frac{\\omega}{\\omega_{p2}} + \\arctan\\frac{\\omega}{\\omega_{p3}} = 180^\\circ$$\n\nWith ωₚ₁ → 0, the first term is **≈ 90° for any ω > 0**. Thus the other two stages must supply the remaining ≈90°, which fixes ω near 1/τ₂ ≈ 1/τ₃.\n\nBut at that ω, the gain of stage 1 is:\n$$|H_1(j\\omega)| \\approx \\frac{A_1}{\\sqrt{1+(\\omega/\\omega_{p1})^2}} \\approx A_1\\frac{\\omega_{p1}}{\\omega} \\propto \\frac{1}{C_L} \\to 0$$\n\nSo the loop gain becomes:\n$$|T| \\approx |H_1||H_2||H_3| \\propto \\frac{1}{C_L} \\to 0 \\ll 1$$\n\n**The loop gain collapses below unity**, violating the oscillation condition.\n\n### Physical interpretation\n- **AC ground:** For any non-zero frequency, an infinite C_L is a short to ground, so the AC signal from inverter 1 is shunted away; inverter 2 sees essentially no input.\n- **Infinite time constant:** Inverter 1 must charge/discharge C_L with its limited drive current I. Since dV/dt = I/C_L → 0, the node voltage never changes in finite time; the switching period diverges to infinity.\n\n### Conclusion\n**Yes.** For any finite (no matter how large) C_L the circuit might switch with an extremely long period (f → 0), but in the limit C_L → ∞ the loop gain is < 1 and the dynamics freeze. The circuit **fails to oscillate** (the frequency becomes zero).",
        "format": "markdown",
        "sha256": "fd4e4c311fe5edb2593b7fa1a4492e36dcca13500aa45841844c8a97fe772e9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large capacitance on one node creates a dominant pole, drives loop gain below unity at the phase-crossover frequency, and prevents oscillation. The additional phase and time-domain explanations are consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9635,
        "total_tokens": 10761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9635,
        "total_tokens": 10761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** Yes—if \\(C_L\\) is made arbitrarily large the loop eventually violates the Barkhausen criterion and sustained oscillation dies out (the period becomes infinite, i.e. \\(f_{\\rm osc}\\to 0\\)).\n\n---\n\n### Why?\n\nThe circuit is a **3‑stage ring oscillator** (odd number of inverters ⇒ DC feedback is negative, so a stable operating point does not exist).  \nLabel the nodes between the inverters 1→2→3→1. Only the first node is loaded by \\(C_L\\) to ground.\n\nModel each inverter near its switching point as a gain \\(-A_i\\) with a single pole:\n\\[\nH_i(s)\\approx \\frac{-A_i}{1+s/\\omega_{pi}}\n\\]\n\nBecause of \\(C_L\\), the pole at node 1 is\n\\[\n\\omega_{p1}\\approx \\frac{1}{R_{\\rm out1}(C_L+C_{\\rm in2})}\\;\\propto\\;\\frac{1}{C_L}\n\\]\nwhile the other two poles \\(\\omega_{p2},\\omega_{p3}\\) are fixed (determined by the inverters’ own output/input capacitances).\n\nThe loop gain is\n\\[\nL(s)=H_1(s)H_2(s)H_3(s)\n      =-\\frac{A_1A_2A_3}{(1+s/\\omega_{p1})(1+s/\\omega_{p2})(1+s/\\omega_{p3})}\n\\]\n\nFor oscillation we need, at some \\(\\omega>0\\):\n1. **Phase:** \\(\\angle L(j\\omega)=0\\pmod{360^\\circ}\\)  \n   \\(\\Rightarrow\\arctan\\!\\frac{\\omega}{\\omega_{p1}}+\\arctan\\!\\frac{\\omega}{\\omega_{p2}}+\\arctan\\!\\frac{\\omega}{\\omega_{p3}}=180^\\circ\\)\n\n2. **Magnitude:** \\(|L(j\\omega)|\\ge 1\\)\n\n---\n\n### Effect of \\(C_L\\to\\infty\\) (\\(\\omega_{p1}\\to 0\\))\n\nBecause \\(\\omega_{p1}\\to 0\\), for any practical \\(\\omega>0\\) the first arctan tends to \\(90^\\circ\\).  \nHence the phase condition forces the other two stages to contribute the remaining \\(90^\\circ\\) together, which happens at a frequency **set only by \\(\\omega_{p2}\\) and \\(\\omega_{p3}\\)**:\n\\[\n\\omega_{\\rm osc}\\approx \\omega_{p2}\\approx\\omega_{p3}\\quad(\\text{independent of }C_L)\n\\]\n\nBut at that same \\(\\omega\\):\n\\[\n|1+j\\omega/\\omega_{p1}|\\approx \\frac{\\omega}{\\omega_{p1}}\n\\approx \\omega\\,R_{\\rm out1}C_L \\;\\propto\\; C_L\n\\]\n\nSo the loop‑gain magnitude becomes\n\\[\n|L(j\\omega_{\\rm osc})|\n\\approx \\frac{A_1A_2A_3}{(\\omega R_{\\rm out1}C_L)\\,|1+j\\omega/\\omega_{p2}|\\,|1+j\\omega/\\omega_{p3}|}\n\\;\\propto\\;\\frac{1}{C_L}\n\\]\n\nAs \\(C_L\\) grows without bound, \\(|L|\\to 0\\). Once\n\\[\nC_L > \\frac{A_1A_2A_3}{\\omega_{\\rm osc}R_{\\rm out1}|1+j||1+j|}\n\\]\nwe have \\(|L|<1\\) at the **only** frequency where the phase is correct. The Barkhausen criterion is violated.\n\nThere is no other frequency that works: if one tried \\(\\omega\\propto 1/C_L\\) to keep \\(\\omega/\\omega_{p1}\\) constant, then \\(\\omega/\\omega_{p2},\\omega/\\omega_{p3}\\to 0\\) and the three arctans can never sum to \\(180^\\circ\\).\n\n---\n\n### Physical interpretation\n\n- For **any finite** \\(C_L\\) the inverter can eventually charge/discharge the capacitor past the threshold of the next stage, so the circuit still switches—but the delay of stage 1 is \\(\\tau_1\\propto R_{\\rm out1}C_L\\). The period is \\(T\\approx 2(\\tau_1+\\tau_2+\\tau_3)\\propto C_L\\), so\n  \\[\n  f_{\\rm osc}\\approx \\frac{1}{2R_{\\rm out1}C_L}\\;\\to\\;0\n  \\]\n- In the **limit** \\(C_L\\to\\infty\\) the required charge is infinite, the ramp never reaches the switching threshold in finite time, and the linear loop gain is far below unity. Thus oscillation ceases.\n\n**Conclusion:** Yes—when \\(C_L\\) becomes arbitrarily large the pole moves to DC, the loop gain is suppressed by the factor \\(\\propto 1/C_L\\), and the circuit eventually fails to oscillate (with \\(f_{\\rm osc}\\to 0\\)).",
        "format": "markdown",
        "sha256": "01d441b20d5c2c21af599cebcc7ec0608f32b1f60521325815767fbd9feeb4a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the dominant pole from loading one node and explains how gain falls below unity at the phase crossover, supporting the conclusion that oscillation fails. However, it contradicts that analysis by claiming every finite CL still oscillates and incorrectly ruling out a stable DC operating point.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 18755,
        "total_tokens": 19881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 18755,
        "total_tokens": 19881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit: it is a **3-stage single-ended ring oscillator** with current-source tails (the dashed boxes) on the NMOS devices.  \nThe key scaling relationships when all inverter W’s are doubled (L unchanged, bias currents **I** fixed) are:\n\n| Parameter | Scaling | Reason |\n|-----------|---------|--------|\n| Load cap. **C** (C₉, Cₐ) | **≈ 2×** | C ∝ W |\n| Stage delay **τ ≈ C·Vₛᵥᵢₙ₉/I** | **≈ 2×** | I is set by the tail sources and does not change |\n| Osc. frequency **fₒₛ꜀ ≈ 1/(6τ)** | **≈ ½** | Period doubles |\n| Power **P = 3·I·Vᴅᴅ** | **Unchanged** | I and Vᴅᴅ are constant |\n| qₘₐₓ = C·Vₛᵥᵢₙ₉** | **≈ 2×** | Larger charge swing needed to switch |\n| 1/f noise coeff. | **≈ ½** | S₁/ƒ ∝ 1/(W·L) |\n\n### Phase-noise scaling\nFor ring oscillators, Leeson/Hajimiri’s model gives the 1/f² (thermal-noise) region:\n\n\\[\n\\mathcal{L}(\\Delta f)\\;\\propto\\;\\frac{1}{P}\\left(\\frac{f_{osc}}{\\Delta f}\\right)^2\n\\]\n\nSince **P is constant** and **fₒₛ꜀ is halved**:\n\n\\[\n\\frac{\\mathcal{L}_{new}}{\\mathcal{L}_{old}} \\approx \\left(\\frac{1}{2}\\right)^2 = \\frac{1}{4}\n\\]\n\nSo the thermal-noise contribution is **reduced by a factor of 4**, i.e. **improved by about 6 dB**.\n\nIn addition:\n- The larger **qₘₐₓ** (≈2×) makes the nodes less sensitive to a given injected noise charge.\n- The **1/f (flicker) noise** of each transistor is cut in half because of the doubled gate area, giving roughly **another 3 dB improvement** close to the carrier (the 1/f³ region).\n\n### Bottom line\nDoubling the transistor widths **lowers (improves) the phase noise**. In the far-out (thermal-noise) region it drops by **≈ 6 dB**; near the carrier the improvement is also aided by lower flicker noise. The trade-off is that the oscillation frequency falls by roughly a factor of two (while power consumption stays the same).",
        "format": "markdown",
        "sha256": "915dd44a9e004190372ac92c3212ece0a65c76c7f87c856e0e79700a81e629ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly says phase noise decreases, but predicts 6 dB and relies on incorrect fixed-current and frequency-halving assumptions. The expected reduction is about 3 dB as device currents and node capacitances both double.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 27662,
        "total_tokens": 29485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 27662,
        "total_tokens": 29485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit: it's a **3-stage single-ended CMOS ring oscillator**. Each stage is an inverter, and the delay per stage is τ ≈ C·V/I.\n\n**What happens when W → 2W (for both NMOS and PMOS, L unchanged):**\n\n1. **Oscillation frequency f₀ stays ~constant**\n   - Load capacitance C (mostly gate cap of next stage) doubles: C ∝ W\n   - Drive current I doubles: I ∝ W\n   - So τ ≈ C·V/I is unchanged ⇒ f₀ = 1/(Nτ) is unchanged.\n\n2. **Power consumption P doubles**\n   - Energy per transition ∝ C·V² ∝ W\n   - Transition rate is constant (f₀ unchanged)\n   - Hence P = V·I_avg ∝ W ⇒ **P → 2P**\n\n3. **Phase-noise scaling (Hajimiri-Lee / Leeson)**\n   - The “signal strength” q_max = C·V ∝ W ⇒ q_max² ∝ W²\n   - Thermal/flicker noise current power ∝ g_m ∝ W\n   - Phase noise L ∝ (noise power)/(q_max²) ∝ W/W² = **1/W**\n\nSo doubling all widths **halves the phase noise in linear scale**, which is:\n\n**The phase noise improves by 3 dB (decreases by 3 dB).**\n\nIn short: the oscillator draws twice the power but stores twice the charge swing, giving a √2 better current-to-charge SNR, hence 3 dB lower phase noise at all offset frequencies (both 1/f² and 1/f³ regions). The oscillation frequency does not change.",
        "format": "markdown",
        "sha256": "ee81eb8c91a3419994101c09d0c92a18202effd7ee2072c61625bbfba9f70869"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction. Its scaling argument is consistent with the solution: signal charge doubles while device noise current power also grows with width, yielding a factor-of-two improvement; it also notes the doubled power cost.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 8130,
        "total_tokens": 9953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 8130,
        "total_tokens": 9953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, this is a **3-stage CMOS ring oscillator**. To determine the effect of doubling all transistor widths (W → 2W) with lengths unchanged, we need to see how the key parameters scale:\n\n| Parameter | Scaling with W | Reason |\n|-----------|---------------|--------|\n| Load capacitance C | **∝ W** | Cgs, Cgd, Cdb all scale with W |\n| Drive current I | **∝ W** | I_D ∝ W(VGS–Vth)² (inverter/digital regime) |\n| Stage delay τ ≈ CV/I | **Constant** | Both C and I double |\n| Oscillation freq. f₀ = 1/(2Nτ) | **Unchanged** | τ is constant |\n| Power P ≈ 2Nf₀CV²DD | **∝ W** | f₀ constant, C doubles |\n| Charge swing q_max = CVDD | **∝ W** | C doubles |\n| Transconductance g_m | **∝ W** | g_m ∝ W in saturation |\n| Thermal noise PSD Σiₙ²/Δf | **∝ W** | iₙ²/Δf = 4kTγg_m |\n\nUsing Hajimiri’s ISF model for ring oscillators:\n$$L(\\Delta\\omega) \\propto \\frac{1}{q_{max}^2}\\sum g_m \\propto \\frac{W}{W^2} = \\frac{1}{W}$$\n\nSo the phase-noise spectral density scales inversely with W (and inversely with power P).\n\n**Specifically, when W doubles:**\n- The stored energy per node (½CV²) doubles\n- The power consumption doubles\n- The noise-to-signal (charge) ratio improves by a factor of 2\n\nTherefore:\n$$\\boxed{L_{new} \\approx \\frac{L_{old}}{2}}$$\n\n**The phase noise improves by about 3 dB (it is cut in half).** The oscillation frequency remains essentially unchanged, but the circuit consumes twice the power. (The 1/f³ flicker-noise corner also improves, by about 9 dB, since flicker noise per device scales as 1/W.)",
        "format": "markdown",
        "sha256": "cf11613d05c5b98915a8a7c85428197b7f48f5685322a5d6254e9438f8ec60d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB phase-noise reduction and explains it with the proper scaling: signal charge doubles while device noise power doubles, improving the noise-to-signal ratio by a factor of two. The frequency and power trends are also consistent with the solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 13594,
        "total_tokens": 15417,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 13594,
        "total_tokens": 15417,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13104,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer (for identical inverters)**  \n\n\\[\n\\boxed{R_x \\;=\\; \\frac{v_x}{i_x}\\;=\\;\\frac{2}{3\\Bigl(g_{mP}+\\dfrac{1}{r_{oP}}\\Bigr)}\n\\;\\;\\xrightarrow{r_o\\to\\infty}\\;\\;\n\\boxed{R_x\\approx \\frac{2}{3g_{mP}}}\n\\]\n\nIf the NMOS and PMOS are symmetric \\((g_{mN}=g_{mP}=g_m,\\;r_{oN}=r_{oP}=r_o)\\):\n\n\\[\n\\boxed{R_x=\\frac{2}{3\\left(g_m+\\dfrac{1}{r_o}\\right)}\n      \\;=\\;\\frac{2r_o}{3\\,(1+g_m r_o)}}\n\\]\n\n---\n\n### Derivation\n\nLabel the three inverter outputs (which are also the inputs to the next stage) \\(v_1,v_2,v_3\\).  \nApply a small‑signal test voltage \\(v_x\\) to the common supply node (all sources of the PMOS devices).\n\n#### 1. Small‑signal inverter equation\nFor one inverter with input \\(v_{in}\\) and output \\(v_{out}\\):\n\n\\[\nv_{out}= -A\\,v_{in}+B\\,v_x\n\\]\n\nwhere  \n\n\\[\nA=(g_{mN}+g_{mP})(r_{oN}\\|r_{oP}),\\qquad \nB=\\Bigl(g_{mP}+\\frac{1}{r_{oP}}\\Bigr)(r_{oN}\\|r_{oP})\n\\]\n\n#### 2. Solve the 3‑stage loop\nThe ring gives\n\n\\[\n\\begin{cases}\nv_1 = -A v_3 + B v_x\\\\[2pt]\nv_2 = -A v_1 + B v_x\\\\[2pt]\nv_3 = -A v_2 + B v_x\n\\end{cases}\n\\]\n\nSolving,\n\n\\[\nv_1=v_2=v_3 = \\frac{B}{1+A}\\,v_x\n\\]\n\nFor identical inverters \\(B/(1+A)=1/2\\), so\n\n\\[\n\\boxed{v_1=v_2=v_3=\\frac{v_x}{2}}\n\\]\n\n*(This result is independent of the loop gain \\(A\\) as long as \\(A\\neq -1\\).)*\n\n#### 3. Current drawn from the supply by one inverter\nOnly the PMOS is connected to \\(V_{DD}\\). With \\(v_{in}=v_{out}=v_x/2\\):\n\n- Source–gate voltage: \\(v_{SG}=v_x-v_{in}=v_x/2\\)  \n  \\(\\Rightarrow\\) current‑source contribution: \\(g_{mP}\\,v_x/2\\)\n\n- Source–drain voltage: \\(v_{SD}=v_x-v_{out}=v_x/2\\)  \n  \\(\\Rightarrow\\) resistive contribution: \\((v_x/2)/r_{oP}\\)\n\nHence\n\n\\[\ni_j = g_{mP}\\frac{v_x}{2}+\\frac{v_x}{2r_{oP}}\n     =\\frac{v_x}{2}\\Bigl(g_{mP}+\\frac{1}{r_{oP}}\\Bigr)\n\\]\n\n#### 4. Total supply current\nThere are three identical inverters in parallel from the supply rail:\n\n\\[\ni_x = i_1+i_2+i_3\n     =3\\,\\frac{v_x}{2}\\Bigl(g_{mP}+\\frac{1}{r_{oP}}\\Bigr)\n     =\\frac{3}{2}\\Bigl(g_{mP}+\\frac{1}{r_{oP}}\\Bigr)v_x\n\\]\n\n#### 5. Small‑signal resistance\n\n\\[\nR_x=\\frac{v_x}{i_x}\n    =\\frac{2}{3\\Bigl(g_{mP}+1/r_{oP}\\Bigr)}\n\\]\n\n---\n\n### Special case (channel‑length modulation ignored, \\(r_o\\to\\infty\\))\n\n\\[\n\\boxed{R_x = \\frac{2}{3g_{mP}}}\n\\]\n\nFor symmetric inverters \\((g_{mP}=g_m)\\) this becomes \\(R_x=2/(3g_m)\\).\n\nSo the supply node sees three inverter “loads” in parallel, each presenting an effective resistance of \\(2/[g_{mP}+1/r_{oP}]\\).",
        "format": "markdown",
        "sha256": "c6b78a08c9492f6f6333cfd0f443ddcfb7355689a43990bacc1230e40b6611df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation analyzes a static small-signal inverter network and gives a gm-based resistance, but misses the dominant oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 23901,
        "total_tokens": 25602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22872,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 23901,
        "total_tokens": 25602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22872,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer**\n\nFor the 3‑stage ring oscillator linearized about its metastable point (all nodes at the inverter switching threshold \\(V_M\\)), the small‑signal resistance seen at the common supply node is  \n\n\\[\n\\boxed{R_X=\\frac{1}{3}\\Bigl[\\frac{1}{g_{mP}+g_{dsP}}+\\frac{1}{g_{mN}+g_{dsN}}\\Bigr]}\n\\]\n\nIf all inverters are identical (\\(g_{mP}=g_{mN}=g_m\\) and \\(r_{oP}=r_{oN}=r_o\\), so \\(g_{ds}=1/r_o\\)):\n\n\\[\n\\boxed{R_X=\\frac{2}{3\\bigl(g_m+1/r_o\\bigr)}}\n\\]\n\nand if channel‑length modulation is ignored (\\(r_o\\to\\infty\\)) with symmetric devices (\\(g_{mP}=g_{mN}=g_m\\)):\n\n\\[\n\\boxed{R_X=\\frac{2}{3g_m}}\n\\]\n\n---\n\n### Derivation\n\n1. **Small‑signal model of one inverter**  \n   Linearize the PMOS and NMOS about the bias point \\(V_{in}=V_{out}=V_M\\).  \n   Denote\n   \\[\n   G_P = g_{mP}+g_{dsP},\\qquad G_N = g_{mN}+g_{dsN}.\n   \\]\n\n   KCL at the output node (\\(v_{out,k}\\)) with input \\(v_{in,k}=v_{out,k-1}\\) gives\n   \\[\n   (g_{mP}+g_{mN})v_{in,k}+(g_{dsP}+g_{dsN})v_{out,k}\n   =(g_{mP}+g_{dsP})v_{dd}.\n   \\tag{1}\n   \\]\n\n2. **Solve the loop (3 stages)**  \n   Write (1) for \\(k=1,2,3\\) with \\(v_{in,1}=v_{out,3}\\), etc. Summing the three equations yields\n   \\[\n   (G_P+G_N)\\sum_{k=1}^{3}v_{out,k}=3G_P v_{dd}\n   \\;\\;\\Longrightarrow\\;\\;\n   \\sum v_{out,k}=3\\frac{G_P}{G_P+G_N}v_{dd}.\n   \\]\n\n   Because \\(|A_v|=|G_P/G_N|^{1/2}\\gg 1\\) for oscillation, the only consistent cyclic solution is uniform:\n   \\[\n   v_{in,k}=v_{out,k}= \\frac{G_P}{G_P+G_N}\\,v_{dd}\\equiv \\beta v_{dd}.\n   \\]\n\n3. **Current drawn from the supply**  \n   Only the PMOS sources connect to \\(V_{DD}\\). For inverter \\(k\\):\n   \\[\n   i_{S,k}=G_P v_{dd}-\\bigl(g_{mP}v_{in,k}+g_{dsP}v_{out,k}\\bigr)\n   =G_P v_{dd}(1-\\beta)\n   =G_P\\frac{G_N}{G_P+G_N}\\,v_{dd}.\n   \\]\n\n   With three inverters in parallel:\n   \\[\n   i_{total}=3\\,G_P\\frac{G_N}{G_P+G_N}\\,v_{dd}.\n   \\]\n\n4. **Small‑signal resistance**\n   \\[\n   R_X=\\frac{v_{dd}}{i_{total}}\n   =\\frac{G_P+G_N}{3G_PG_N}\n   =\\frac{1}{3}\\Bigl(\\frac{1}{G_P}+\\frac{1}{G_N}\\Bigr).\n   \\]\n\nThis is the resistance of one inverter (\\(R_{inv}=1/G_P+1/G_N\\)) divided by 3, since the three stages share the same supply rail. Substituting \\(G_P,G_N\\) gives the formulas above.",
        "format": "markdown",
        "sha256": "4a1d6feb0f8c1c0178160277c94a25539eae7049475a2ad68d14e8df78ebeeda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives only a static, metastable-point gm-based resistance and misses the dominant supply current from oscillation-driven charging and discharging of the load capacitances. The golden solution explicitly assigns this internally consistent static derivation a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 25256,
        "total_tokens": 26957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 25256,
        "total_tokens": 26957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24370,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer (for identical inverters)**  \n\n\\[\n\\boxed{R_x \\;=\\;\\frac{2}{3\\left(g_m+\\dfrac{1}{r_o}\\right)}\n\\;\\approx\\;\\frac{2}{3g_m}\\quad (r_o\\to\\infty)}\n\\]\n\n---\n\n### Derivation\n\nLabel the three inverter outputs/inputs \\(v_1,v_2,v_3\\) and apply a small‑signal test voltage \\(v_x\\) at the common supply node (all DC supplies are AC ground).\n\n**Small‑signal model of one inverter**\n\n* NMOS: transconductance \\(g_{mN}\\), output resistance \\(r_{oN}\\) (source grounded, gate at \\(v_{in}\\), drain at \\(v_{out}\\))\n* PMOS: transconductance \\(g_{mP}\\), output resistance \\(r_{oP}\\) (source at \\(v_x\\), gate at \\(v_{in}\\), drain at \\(v_{out}\\))\n\nKCL at the output node \\(v_i\\) (currents leaving the node):\n\n\\[\n\\frac{v_i}{r_{oN}}+g_{mN}v_{in}+\\frac{v_i-v_x}{r_{oP}}\n-g_{mP}(v_x-v_{in})=0\n\\]\n\nwhich gives\n\n\\[\n(G_N+G_P)v_i+(g_{mN}+g_{mP})v_{in}=(G_P+g_{mP})v_x\n\\tag{1}\n\\]\n\nwhere \\(G_N=1/r_{oN}\\) and \\(G_P=1/r_{oP}\\).\n\n**Loop equations**\n\nWith the ring connection \\((v_{in,1},v_{in,2},v_{in,3})=(v_3,v_1,v_2)\\):\n\n\\[\n\\begin{cases}\nG v_1 + g v_3 = C v_x\\\\[2pt]\nG v_2 + g v_1 = C v_x\\\\[2pt]\nG v_3 + g v_2 = C v_x\n\\end{cases}\n\\]\n\nwith \\(G=G_N+G_P\\), \\(g=g_{mN}+g_{mP}\\), \\(C=G_P+g_{mP}\\).\n\nBecause the system is symmetric,\n\n\\[\nv_1=v_2=v_3\\equiv v\n\\quad\\Longrightarrow\\quad\nv=\\frac{C}{G+g}\\,v_x\n\\]\n\nFor **matched inverters** (\\(g_{mN}=g_{mP}=g_m\\), \\(r_{oN}=r_{oP}=r_o\\)):\n\n\\[\nv=\\frac{v_x}{2}\\;\\;\\Longrightarrow\\;\\;v_x-v=\\frac{v_x}{2},\\quad v_x-v_{in}=\\frac{v_x}{2}\n\\]\n\n**Current drawn from the supply**\n\nFor one inverter the supply delivers\n\n\\[\nI_i=\\frac{v_x-v}{r_o}+g_m(v_x-v)\n      =\\frac{v_x}{2}\\left(\\frac{1}{r_o}+g_m\\right)\n\\]\n\nAll three inverters are in parallel, so\n\n\\[\nI_{\\text{tot}}=3I_i=\\frac{3}{2}\\left(g_m+\\frac{1}{r_o}\\right)v_x\n\\]\n\n**Small‑signal resistance**\n\n\\[\nR_x=\\frac{v_x}{I_{\\text{tot}}}\n    =\\frac{2}{3\\left(g_m+\\dfrac{1}{r_o}\\right)}\n\\]\n\nIf channel‑length modulation is neglected (\\(r_o\\to\\infty\\)):\n\n\\[\n\\boxed{R_x=\\frac{2}{3g_m}}\n\\]\n\n---\n\n*General (unsymmetrical) form:*\n\n\\[\nR_x=\\frac{G_N+G_P+g_{mN}+g_{mP}}\n           {3\\,(G_P+g_{mP})(G_N+g_{mN})}\n\\]",
        "format": "markdown",
        "sha256": "e66c95aca1f60926923a30dd910de47c360b73392d8f6cc1edd575a33e2ee1d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static, gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply resistance. The golden solution explicitly assigns this static gm-based approach a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 19465,
        "total_tokens": 21166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 19465,
        "total_tokens": 21166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18585,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nYes. The formula  \n\n\\[\nR_X\\approx \\frac13\\Bigl(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\Bigr)\n\\]\n\nis correct only at the **unstable DC equilibrium** where all three inverters sit at  \n\\(V_{in}\\approx V_{out}\\approx V_{DD}/2\\). Once the loop oscillates the nodes swing\nrail‑to‑rail, the bias conditions are completely different, so \\(R_X\\) is no longer\nconstant and the factor \\(1/3\\) disappears.\n\n---\n\n### Why the original formula holds (static case)\n\nAt the metastable point every inverter has \\(V_{in}=V_{out}\\).  \nFor both the NMOS and the PMOS the gate is tied to the drain, so each device is\n**diode‑connected**:\n\n* NMOS: resistance \\(1/g_{mn}\\) from drain (output) to ground  \n* PMOS: resistance \\(1/g_{mp}\\) from supply to drain (output)\n\nThe two are in series, giving one inverter\n\n\\[\nR_{\\text{inv}} \\approx \\frac1{g_{mn}}+\\frac1{g_{mp}} .\n\\]\n\nAll three inverters are in parallel between \\(V_{DD}\\) and ground, hence\n\n\\[\nR_X = \\frac{R_{\\text{inv}}}{3}.\n\\]\n\n---\n\n### What happens when the circuit oscillates?\n\nA 3‑stage ring has no stable digital state; the three nodes are separated by\nabout one gate delay (\\(\\sim T/3\\)). They swing approximately between 0 and\n\\(V_{DD}\\).\n\nAt any given instant:\n\n| Inverter state | NMOS | PMOS | Path \\(V_{DD}\\to\\)GND? |\n|----------------|------|------|------------------------|\n| Output **high** or **low** | One ON, one OFF | One ON, one OFF | **Open** |\n| Near transition (\\(V_{in}\\approx V_{DD}/2\\)) | Both ON | Both ON | Closed: \\(R\\approx 1/g_{mn}+1/g_{mp}\\) |\n\nBecause the transitions are brief and staggered by \\(T/3\\), **only one inverter\nis near the middle at a time**; the other two have one transistor fully cut\noff. There is no DC path through them from supply to ground (the nodes between\ninverters are coupled only through gate oxide).\n\nSo the supply sees a **time‑varying** resistance:\n\n\\[\nR_X(t)\\approx\n\\begin{cases}\n\\dfrac1{g_{mn}}+\\dfrac1{g_{mp}}, & \\text{during the brief transition of one stage}\\\\[6pt]\n\\infty, & \\text{otherwise}\n\\end{cases}\n\\]\n\nThe constant parallel factor of 3 is gone; when a path exists it is about\n**three times larger** than the static formula predicts, and for most of the\nperiod there is essentially no resistive path at all.\n\nA few additional points:\n\n* **Bias dependence:** The devices that are “on” in the high/low states are in\n  deep triode with \\(|V_{GS}|\\approx V_{DD}\\), so their effective conductances\n  differ from the saturation values \\(g_{mn},g_{mp}\\) used at \\(V_{DD}/2\\).\n* **No single operating point:** Small‑signal analysis requires a fixed DC\n  bias. In oscillation the circuit is in a periodic large‑signal steady state;\n  one must use Floquet/periodic analysis or large‑signal simulation, not a\n  constant \\(R_X\\).\n* **Supply current:** Consequently the supply draws current only in narrow\n  pulses during the three transitions per period. The “average” supply\n  impedance is capacitive/inductive at the oscillation frequency, not the\n  constant resistor calculated above.\n\n---\n\n**Bottom line:** The computation assumes all three inverters are simultaneously\ndiode‑connected at \\(V_{DD}/2\\). That never happens in the oscillating loop.\nThus \\(R_X\\) is **not** \\((1/3)(1/g_{mn}+1/g_{mp})\\); it is time‑dependent,\napproximately \\(1/g_{mn}+1/g_{mp}\\) for short intervals and essentially open\ncircuit the rest of the time.",
        "format": "markdown",
        "sha256": "d45de874b33177a43f7bd9fd359ec7d144f80a4a594f15859425a4496002154a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that the supply resistance becomes much higher because the devices are off most of the time, missing that charging and discharging the node capacitances sets the average current and keeps RX on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 29908,
        "total_tokens": 33470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28024,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1781,
        "output_tokens": 14954,
        "total_tokens": 16735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14012,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nYes. The value  \n\n\\[\nR_X\\approx \\frac13\\Bigl(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\Bigr)\n\\]\n\nis correct only at the **unstable DC metastable point** (all three outputs ≈ VDD/2). Once the loop is closed with three stages the circuit oscillates, and then that constant resistance does not describe what the supply sees.\n\n---\n\n### Why the formula was derived\n\nWith a small perturbation \\(v_x\\) on VDD and all nodes free, linearizing the three inverters gives\n\n\\[\nv_{in,j}=v_{out,j}\\propto v_x\n\\]\n\nso for every transistor \\(v_{gs}=v_{ds}\\): each device is **diode‑connected** with resistance \\(1/g_m\\).  \nOne inverter therefore looks like \\(1/g_{mn}+1/g_{mp}\\) from supply to ground, and with three inverters physically in parallel the result is divided by 3.\n\nBut this requires **all six transistors to be on simultaneously**—i.e. all three inverters sitting in their high‑gain linear region.\n\n---\n\n### What happens when it oscillates\n\nA 3‑stage ring has loop gain \\(>1\\), so the metastable point is unstable. The outputs become large‑signal square waves (≈ 0 to VDD) separated by 120°.\n\nAt any instant each inverter is in one of three states:\n\n| State | NMOS | PMOS | Path VDD→GND? |\n|-------|------|------|---------------|\n| Output high, input low | OFF | ON | **Open** (NMOS open) |\n| Output low, input high | ON | OFF | **Open** (PMOS open) |\n| In transition (input ≈ VDD/2) | ON | ON | **Closed** – both conduct |\n\nBecause the transition is fast compared with the period \\(T=6t_p\\), **typically only one inverter is in transition at a time**; the other two present an open circuit.\n\nSo the supply does **not** see three parallel resistances. Instead:\n\n* **During a switch:** only one inverter conducts, so  \n  \\[\n  R_X(t)\\approx \\frac1{g_{mn}}+\\frac1{g_{mp}}\n  \\]\n  (the factor 1/3 is gone).\n\n* **Between switches:** no inverter has both devices on, so  \n  \\[\n  R_X(t)\\approx \\infty .\n  \\]\n\nThus \\(R_X\\) is **periodic and time‑varying**, not a constant \\((1/3)(\\dots)\\).\n\n---\n\n### Bottom line\n\n- The formula \\((1/3)(1/g_{mn}+1/g_{mp})\\) is the small‑signal resistance **around the unstable DC bias point** where all three stages are linear.\n- Once oscillating, the inverters spend almost all their time fully on or fully off. The supply current flows only in brief pulses (one inverter at a time).\n- Consequently the constant answer **does change**: the effective supply impedance is about **three times larger** during the brief conduction windows and essentially infinite otherwise. To analyze supply perturbations in the running oscillator one must use **large‑signal periodic (time‑varying) analysis**, not a single DC small‑signal resistance.",
        "format": "markdown",
        "sha256": "51d4db1f7ce8cfaa9cf6ee4a5e4e98e029079fc9dfeb9155bdde0cd3befc30cb"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the DC small-signal model does not describe the running oscillator, but reaches the central wrong conclusion: that the effective supply resistance is much higher because devices are off most of the time. It misses the capacitive charging mechanism and that the average resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3562,
        "output_tokens": 31560,
        "total_tokens": 35122,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30116,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1781,
        "output_tokens": 15780,
        "total_tokens": 17561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15058,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nYes — the formula is only valid for the unstable DC “all-nodes-at-the-trip-point” state. Once the loop is actually oscillating the impedance seen at the supply is **time‑varying, nonlinear and frequency‑dependent**; it is no longer the constant resistor \\((1/3)(1/g_{mn}+1/g_{mp})\\).\n\n---\n\n### Why the given formula was derived\n\nThe expression  \n\n\\[\nR_X\\approx \\frac13\\Bigl(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\Bigr)\n\\]\n\ncomes from treating each inverter as **two diode‑connected devices in series** (NMOS and PMOS, each with small‑signal resistance \\(1/g_m\\)) and then putting the three inverters in parallel (\\(\\div 3\\)).\n\nThat model requires  \n\n\\[\nv_{in,i}\\approx v_{out,i}\\quad\\text{for every stage }i,\n\\]\n\ni.e. every inverter must sit at its switching threshold \\(V_{DD}/2\\).  \nWith three inverting stages in a loop the **only** DC solution is indeed\n\n\\[\nV_1=V_2=V_3\\approx V_{DD}/2,\n\\]\n\nbut it is **unstable**. At that metastable point gate and drain of each transistor are at the same potential, so each device is diode‑connected and the resistance above is correct.\n\n---\n\n### What happens when the circuit oscillates?\n\nA 3‑stage ring has no stable DC state; the nodes swing rail‑to‑rail with roughly \\(120^\\circ\\) phase shifts. At any instant:\n\n* In one inverter the output is **high** → PMOS on (triode/saturation), NMOS **cut off**.\n* In another the output is **low** → NMOS on, PMOS **cut off**.\n* Only the inverter in transition has **both** devices on briefly.\n\nSo the conditions for the diode‑connected model are **never satisfied** except for a brief moment during each transition.\n\nConsequences for \\(R_X\\):\n\n| Aspect | Static (metastable) case | Oscillating case |\n|--------|--------------------------|------------------|\n| **Operating point** | Fixed at \\(V_{DD}/2\\) for all stages | Periodic large‑signal orbit; nodes near 0 or \\(V_{DD}\\) |\n| **Transistor state** | Both on, gate = drain (AC) | One on, one off (mostly); gate driven by previous stage |\n| **Path supply→ground** | Present in all 3 inverters simultaneously | Present only in the stage(s) currently switching |\n| **Small‑signal model** | Constant \\(g_m\\), linear resistor | **Linear Periodic Time‑Varying (LPTV)** system |\n| **DC resistance** | Finite: \\((1/3)(1/g_{mn}+1/g_{mp})\\) | **Infinite** (ignoring leakage). No continuous DC path; supply only delivers pulsed charge \\(Q\\approx C_LV_{DD}\\) to the load caps. Average current is \\(I_{avg}\\approx 3C_LV_{DD}f_{osc}\\). |\n| **AC impedance near \\(f_{osc}\\)** | Not defined (no oscillation) | The supply perturbation modulates inverter delay → **FM/PM** of the oscillation. The linearized impedance \\(Z(j\\omega)\\) is complex and can have a **negative real part** (the oscillator can deliver power back at/near \\(f_{osc}\\) and its harmonics). |\n| **Factor 1/3** | Three paths in parallel | Only ~one stage is in transition at a time, so the “parallel” argument fails. |\n\n---\n\n### How to analyze it correctly\n\nIf you want the supply impedance of the **running** oscillator you must:\n\n1. Find the **periodic steady‑state** (large‑signal) waveform \\(v_k(t)\\) for all nodes.\n2. Linearize each transistor around that time‑varying trajectory.\n3. Apply a small perturbation \\(v_x(t)\\) at the supply and solve the coupled linear periodic system (Floquet / harmonic‑balance).\n\nThe result is not a single number \\(R_X\\) but a **frequency‑dependent impedance matrix** \\(Z(j\\omega)\\). Far below \\(f_{osc}\\) it behaves like the dynamic charging impedance (\\(dV/dI \\sim 1/(3C_Lf_{osc})\\) with corrections from supply‑pushing coefficient \\(K_{VDD}\\)). Near \\(f_{osc}\\) it exhibits the mixing/locking behavior mentioned above.\n\n---\n\n### Bottom line\n\nThe computation \\(R_X\\approx (1/3)(1/g_{mn}+1/g_{mp})\\) is correct **only for the unstable DC bias point** where all inverters are diode‑connected. Once the ring is actually oscillating, that bias point is never occupied, the devices switch on and off, and the supply impedance becomes **time‑varying and frequency‑dependent** — it is certainly not that constant resistor.",
        "format": "markdown",
        "sha256": "0376440d6c25c057e4295ee67da45d61f9885ac259f9502ac04c2e572dc27fbe"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct capacitive charging relation, RX ≈ 1/(3CLfosc), but never shows that this remains on the order of the MOS on-resistance or inverse gm. Its claim of infinite DC resistance and emphasis that the impedance is not the same resistor misstate the key conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3562,
        "output_tokens": 19180,
        "total_tokens": 22742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16964,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1781,
        "output_tokens": 9590,
        "total_tokens": 11371,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, this is a **StrongARM latch comparator**. During the evaluation phase (CK high), transistor **M7** acts as the tail current source for the differential input pair (M1, M2). The cross-coupled inverters formed by (M3,M5) and (M4,M6) provide the load.\n\n### Small-signal gain analysis\nApplying a differential input $v_{in}=v_{in1}-v_{in2}$ and using symmetry ($v_t=0$, $v_y=-v_x$, $v_q=-v_p$), the initial linear-region voltage gain is found to be\n\n$$A_v \\approx \\frac{g_{m1}}{g_{m5}} \\;=\\; \\sqrt{\\frac{(W/L)_1}{(W/L)_5}}$$\n\n(If channel-length modulation is ignored; with $\\lambda\\neq0$ there is a weak $1/\\sqrt{I}$ correction, but the dominant dependence is on the transistor size ratios.)\n\n### Effect of increasing $W_7$\nThe bias current $I$ is set primarily by M7:\n$$I \\propto (W/L)_7$$\n\nSince all branch currents scale with $I$:\n- $g_{m1}, g_{m2} \\propto \\sqrt{I} \\propto \\sqrt{W_7}$\n- $g_{m3}, g_{m4}, g_{m5}, g_{m6} \\propto \\sqrt{I} \\propto \\sqrt{W_7}$\n\nThus both the numerator and denominator of $A_v$ scale by the same factor $\\sqrt{W_7}$, and they cancel:\n\n$$\\frac{g_{m1}}{g_{m5}} \\;\\text{is independent of } I \\text{ and hence of } W_7$$\n\nAlso, for pure differential signals the AC voltage at the tail node is $v_t=0$, so M7’s own output resistance $r_{o7}$ does not enter the gain expression.\n\n### Conclusion\n**The initial voltage gain remains essentially unchanged (constant)** as $W_7$ increases. \n\nWhat does change is the **bias current** ($I \\propto W_7$), which improves the comparator’s speed and slew rate, but it does not alter the intrinsic gain ratio determined by the input pair and the PMOS load devices.",
        "format": "markdown",
        "sha256": "bdb811b96cfd36638f83c3017dd86635ce5da5b0e4d793ca75ffde8f13176945"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M7 as the tail device and recognizes that widening it increases current, but it incorrectly concludes the initial gain stays constant. The essential trend is that gain decreases because the relevant gain factor falls as tail current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 31744,
        "total_tokens": 34367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 31744,
        "total_tokens": 34367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit, we have a clocked regenerative comparator/sense amplifier with:\n\n- **M1, M2**: Differential input pair\n- **M7**: Tail current source (gate driven by CK)\n- **M3, M4**: Cross-coupled NMOS load devices\n- **M5, M6**: Cross-coupled PMOS load devices\n\n### Small-Signal Gain Analysis\nFor differential inputs ($v_{in1} = -v_{in2} = v_{in}/2$), the common source node of M1/M2 is an AC virtual ground, so the impedance of M7 (whether $r_{o7}$ or $g_{m7}$) does **not** affect the differential signal path.\n\nWriting KCL at nodes X, Y, P, and Q and solving the symmetric system (ignoring channel-length modulation for the dominant term), the initial small-signal voltage gain is:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{v_x - v_y}{v_{in1}-v_{in2}} \\approx \\frac{g_{m1}}{g_{m5}} = \\frac{g_{m2}}{g_{m6}}$$\n\nThis result is independent of $g_{m3}$ and $g_{m4}$—they cancel in the derivation.\n\n### Dependence on M7 Width\nThe tail current is set by M7:\n$$I \\approx \\frac{1}{2}\\mu C_{ox}\\left(\\frac{W}{L}\\right)_7 (V_{GS7}-V_{TH})^2 \\propto W_7$$\n\nThe transconductances scale as:\n$$g_{m1} \\propto \\sqrt{I_{D1}} \\propto \\sqrt{W_7}, \\quad g_{m5} \\propto \\sqrt{I_{D5}} \\propto \\sqrt{W_7}$$\n\nSince both $g_{m1}$ and $g_{m5}$ are proportional to $\\sqrt{I}$ (and $I_{D1}=I_{D5}=I/2$), their ratio is:\n\n$$\\frac{g_{m1}}{g_{m5}} = \\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_5}}$$\n\nThis depends **only on the aspect ratios and mobilities** of M1 and M5, not on the bias current $I$.\n\n### Conclusion\nIncreasing the width $W_7$ raises the bias current, but both the input pair and the PMOS load transconductances scale identically with $\\sqrt{I}$. Therefore:\n\n**The initial voltage gain remains constant (unchanged).** It is determined solely by the transistor sizing ratios $(W/L)_1$ and $(W/L)_5$ and is independent of the tail current set by M7. (Only second-order corrections involving $\\lambda I_D$ change slightly, but the dominant gain is unaffected.)",
        "format": "markdown",
        "sha256": "51dab9d2aeab01e20ab78a12e4bda395808b7f6817e518279184f4c417b075ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that a wider M7 increases tail current and that input-pair transconductance grows roughly as the square root of current, but its claimed cancellation with the load transconductance is not the initial-gain relation. It concludes the gain is unchanged, whereas the initial gain decreases as M7 width increases.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 29315,
        "total_tokens": 31938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28668,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 29315,
        "total_tokens": 31938,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28668,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a differential pair **M₁/M₂** with tail current source **M₇**, and cross-coupled loads **M₃/M₄** (NMOS) and **M₅/M₆** (PMOS). During the initial evaluation phase, **M₅** and **M₆** are cut off, while **M₃** and **M₄** are in saturation carrying the same bias current as the input pair:  \n$$I_{D1}=I_{D3}=I_{D4}=I_{D2}\\approx \\frac{I_{SS}}{2}$$\n\nThe small-signal differential voltage gain is approximately that of the input pair loaded by the output resistances of **M₁–M₄**:\n$$A_v \\approx g_{m1}\\,(r_{o1}\\parallel r_{o3}) \\approx g_{m1}r_{o1}$$\n\nNow examine how this scales with **M₇**:\n\n1. **Bias current:**  \n   $$I_{SS}\\propto \\left(\\frac{W}{L}\\right)_7 \\;\\Rightarrow\\; I_{D1}\\propto W_7$$\n\n2. **Transconductance of M₁:**  \n   $$g_{m1}=\\sqrt{2\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 I_{D1}}\\propto \\sqrt{I_{SS}}\\propto \\sqrt{W_7}$$\n\n3. **Output resistance of M₁:**  \n   $$r_{o1}=\\frac{1}{\\lambda I_{D1}}\\propto \\frac{1}{I_{SS}}\\propto \\frac{1}{W_7}$$\n\nTherefore the intrinsic gain of the input stage is\n$$|A_v|\\approx g_{m1}r_{o1}=\\frac{2V_A}{V_{OV1}}$$\nwhere the overdrive voltage is\n$$V_{OV1}=\\sqrt{\\frac{2I_{D1}}{\\mu_n C_{ox}(W/L)_1}}\\propto \\sqrt{I_{SS}}\\propto \\sqrt{W_7}$$\n\nPutting it together:\n$$|A_v|\\propto \\frac{1}{V_{OV1}}\\propto \\frac{1}{\\sqrt{W_7}}$$\n\n**Conclusion:** As the width of **M₇** increases, the tail current **I_SS** rises, which increases the overdrive voltage of **M₁/M₂** and lowers their intrinsic gain ($g_m r_o$). Hence the **initial voltage gain decreases** (specifically, it falls roughly in proportion to $1/\\sqrt{W_7}$).",
        "format": "markdown",
        "sha256": "c130650d93abc258b21cc5b55cef3116f4318a983af0f6d1307d708de5db5a03"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the correct decreasing trend and explains that a wider M7 raises tail current while the input-pair gain-per-current falls. Its simplified gm·ro model yields the same inverse-square-root dependence.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 32390,
        "total_tokens": 35013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31792,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 32390,
        "total_tokens": 35013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31792,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit, we have a **StrongARM-style dynamic comparator/amplifier** with:\n- Input differential pair **M₁/M₂** with tail current source **M₇**\n- Cross-coupled load pair **M₃/M₄** (between nodes P/Q and X/Y)\n- Cross-coupled PMOS pair **M₅/M₆** (between VDD and X/Y)\n- Clocked switches **S₁–S₄** for precharge/reset\n\n### Key Analysis\nDuring the initial evaluation phase (right after the clock turns on), the differential input creates a current difference:\n$$\\Delta I \\approx g_{m1,2}\\,\\Delta V_{in}$$\n\nThis current charges/discharges the capacitances at nodes **P** and **Q**:\n$$\\frac{dV_P}{dt} \\approx -\\frac{I_1}{C_P}, \\quad \\frac{dV_Q}{dt} \\approx -\\frac{I_2}{C_Q}$$\n\nIntegrating over the initial linear region (duration $\\Delta t$):\n$$\\Delta V_{PQ} \\approx \\frac{g_{m1,2}\\,\\Delta V_{in}}{C_{P,Q}}\\,\\Delta t$$\n\nThis voltage difference at P/Q is then coupled to the output nodes X/Y through M₃/M₄. The effective **initial voltage gain** (defined as $\\Delta V_{out}/\\Delta V_{in}$ over that initial interval) is therefore proportional to $1/C_{P,Q}$.\n\n### Conclusion\nIf you **increase the capacitance at nodes P and Q**:\n- The rate of voltage change $\\frac{dV}{dt} = \\frac{I}{C}$ becomes **smaller**\n- For the same input and evaluation time, the voltage swing developed at P and Q is **reduced**\n- Consequently, the signal coupled to the second stage (X/Y) is smaller\n\n**The initial voltage gain decreases** (it is inversely proportional to $C_P$ and $C_Q$). The DC/transistor-only gain formula ($\\sim g_{m1}/g_{m3}$) is unchanged, but the **effective transient gain** that determines the comparator's resolution and initial amplification is lowered, and the circuit becomes slower.",
        "format": "markdown",
        "sha256": "78b5cae2b6415ea7d11664014fa61ca114049d7670826b7c318ff8a6a1a71f85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the node-voltage change, but incorrectly concludes that the initial gain decreases. The longer amplification interval offsets the smaller slope, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 21288,
        "total_tokens": 23911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 21288,
        "total_tokens": 23911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this clocked comparator/latch, nodes **P** and **Q** are the drain nodes of the input differential pair (M₁/M₂). During the initial evaluation phase (before the cross-coupled inverters M₃–M₆ fully regenerate), the differential input current is integrated onto the capacitances at P and Q.\n\nThe **initial voltage gain** of this stage is essentially the voltage developed across those nodes divided by the input difference:\n\n\\[\nA_{v0} \\approx \\frac{g_{m1,2}\\,\\Delta t}{C_{P,Q}}\n\\]\n\nwhere:\n- \\(g_{m1,2}\\) is the transconductance of the input pair,\n- \\(\\Delta t\\) is the available amplification time,\n- \\(C_{P,Q}\\) is the total capacitance at nodes P and Q.\n\nBecause the current is fixed by the input voltage and transistor bias, a larger capacitance means a **smaller voltage swing** for the same integration time (\\(\\Delta V \\approx I\\Delta t/C\\)).\n\n**Therefore, if you increase the capacitance at P and Q, the initial voltage gain decreases** (it is inversely proportional to that capacitance). The circuit also becomes slower, since the RC time constant at those nodes increases, delaying the onset of regeneration.",
        "format": "markdown",
        "sha256": "4d59f4d63f7e55ea6c71df5cf8c9d9e68d1eebd31f35a7baffa513bd8114c944"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly recognizes that larger capacitance slows the transient, but it incorrectly concludes that the initial gain decreases. The longer amplification interval compensates for the smaller voltage slope, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 17390,
        "total_tokens": 20013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 17390,
        "total_tokens": 20013,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit, we recognize a **StrongARM-style clocked comparator/latch**:\n\n- **M₁, M₂** form the input differential pair with tail switch **M₇**\n- **M₃–M₆** form the cross-coupled regenerative latch\n- **X** and **Y** are the outputs (Vₒᵤₜ = Vₓ – Vᵧ)\n- **P** and **Q** are the intermediate nodes between the input pair and the latch\n\n### What determines the “initial voltage gain”?\nBefore the positive feedback takes over, the circuit behaves as a **linear two-stage amplifier**:\n1. The input pair (M₁/M₂) converts Vᵢₙ to a differential current ΔI ≈ gₘ₁·Vᵢₙ\n2. This current is coupled through M₃/M₄ to nodes X/Y, where M₅/M₆ convert it back to voltage\n\nThe small-signal (DC/instantaneous) initial gain is set **only by transistor transconductances and output resistances** (approximately Aᵥ ≈ gₘ₁/gₘ₅, with corrections from gₘ₃, gₘ₄, rₒ, etc.). Capacitance does **not** appear in this DC gain expression.\n\n### Effect of increasing Cₚ and C_Q\nIf you increase the capacitance at nodes P and Q:\n\n- **The initial voltage gain itself does NOT change.** At t = 0⁺ (or at DC), capacitors are open circuits, so the intrinsic gain Aᵥ = d(Vₓ–Vᵧ)/dVᵢₙ remains exactly the same.\n- **What does change is the speed/bandwidth.** The voltage at P and Q builds up according to dV/dt ≈ I/C. With larger C:\n  - The pole frequencies at P and Q drop (ωₚ ≈ gₘ/C)\n  - The initial slope d(Vₓ–Vᵧ)/dt is reduced (it scales roughly as 1/CₚC_Q)\n  - The comparator takes longer to reach the regeneration threshold\n\n### Bottom line\n> **The initial (small-signal/DC) voltage gain is unaffected** — it is determined solely by the MOSFET parameters. However, **the response becomes slower**: the voltage at P and Q develops more slowly (ΔV ≈ I·Δt/C), so over any fixed evaluation window the effective amplification is smaller and the regeneration is delayed.",
        "format": "markdown",
        "sha256": "c17fdd39640371ea292ff7cd68e339fe753ab38a920385d7126b0a8629eb33c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion that the initial gain is unchanged and the transient is slower is correct. However, the explanation treats initial gain as a DC/instantaneous transistor gain; Razavi’s initial gain is accumulated until regeneration begins, with the longer amplification interval canceling the capacitance effect.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 28531,
        "total_tokens": 31154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 28531,
        "total_tokens": 31154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, this is a **StrongARM-style dynamic comparator/latch**. Let’s identify the roles:\n\n- **M1, M2**: Input differential pair  \n- **M7**: Tail current switch (controlled by CK)  \n- **M3, M4**: Cross-coupled NMOS transistors of the regenerative latch  \n- **M5, M6**: Cross-coupled **PMOS load** transistors of the latch (sources at VDD, drains at X and Y, gates cross-coupled)  \n- **S1–S4**: Clock-controlled precharge/evaluation switches\n\nThe nodes **X** and **Y** are the differential outputs. During evaluation, the latch formed by (M5,M3) and (M6,M4) regenerates the small initial imbalance created by M1/M2 into a full rail-to-rail swing.\n\n### Effect of widening M5 and M6\n\nThere are two competing effects, but both point to **slower regeneration**:\n\n1. **Reduced loop gain of the latch**  \n   The small-signal voltage gain of each inverter in the latch is approximately  \n   $$|A_v| \\approx \\frac{g_{mN}}{g_{mP} + g_{dsN} + g_{dsP}}$$  \n   Increasing $W_{5,6}$ raises $g_{m5}$ and $g_{m6}$. A stronger PMOS load **lowers** the inverter gain, which reduces the loop gain ($A_{loop} = |A_{v1}A_{v2}|$). Lower loop gain means the exponential regeneration is slower ($v(t) \\propto e^{t/\\tau}$ with larger $\\tau$).\n\n2. **Increased capacitive load at X and Y**  \n   Wider transistors have larger gate oxide, overlap, and diffusion capacitances. Since the gates of M3/M4 and M6/M5 are all tied to X or Y, increasing $W_5$ and $W_6$ directly increases $C_X$ and $C_Y$. The regeneration time constant is $\\tau \\approx C_L/g_{m,eff}$; even though $g_m$ grows with $W$, the capacitance grows proportionally, and the net effect—combined with the reduced loop gain—is a **larger $\\tau$**.\n\n### Conclusion\n**The speed degrades (worsens).** In this comparator, M5 and M6 should generally be kept relatively weak (smaller $W/L$ than M3/M4) to maintain high loop gain and minimize loading on the critical nodes X and Y. Making them wider fights the pull-down action and slows the latch regeneration.",
        "format": "markdown",
        "sha256": "64c3969816f9f47720b3a11f1127581da22231562f27b8b21262ae9b4417036a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled PMOS devices and notes that widening them adds capacitance, but it concludes speed degrades. The key result is that stronger regeneration initially improves speed; added capacitance limits the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 9455,
        "total_tokens": 12077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 9455,
        "total_tokens": 12077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer: The speed degrades (gets slower).**\n\n**Why:**  \nM₅ and M₆ are the PMOS devices in the two cross‑coupled inverters that form the regenerative latch (together with M₃ and M₄). Their gates and drains are connected directly to the critical nodes **X** and **Y**.\n\nIf you widen M₅ and M₆:\n\n1. **More capacitive loading on X and Y** – Their gate capacitances (C₍gs₎, C₍gd₎) and drain diffusion capacitances grow proportionally with W. This increases the RC time constants at the regeneration nodes.\n2. **Fixed evaluation current** – The current that initially pulls X/Y down is set by the input pair (M₁/M₂) and the tail transistor M₇. It does **not** increase when M₅/M₆ are widened, so the initial discharge dV/dt = I/C becomes slower.\n3. **Lower gₘ/C benefit for PMOS** – Although the pull‑up strength (gₘ₅, gₘ₆) increases, PMOS mobility is much lower than NMOS mobility. Thus the added transconductance per unit of added capacitance is smaller than for the NMOS side (M₃/M₄). The regeneration rate is roughly proportional to gₘ,eff/C; widening only the PMOS loads lowers this ratio.\n4. **Precharge is also slowed** – The switches S₁–S₄ must charge the larger capacitances at X and Y during the reset phase.\n\nSo while M₅/M₆ become slightly stronger pull‑up devices, the **dominant effect is the heavier capacitive load** on the nodes that must switch quickly. The latch takes longer to reach the regeneration threshold and to fully resolve, so the comparator’s overall delay increases.\n\n**In short:** Wider M₅/M₆ → larger C at X,Y → slower discharge and regeneration → **speed degrades**.",
        "format": "markdown",
        "sha256": "cdfe8986aa32e2fdfbb84fefff27a0a10fee639741223dbe28950c3c8fca85f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion reverses the key trend: widening M5/M6 initially speeds regeneration, with added capacitance limiting the benefit only at larger widths. The answer recognizes that capacitance grows and pull-up strength increases, but incorrectly claims the capacitance dominates initially.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 13259,
        "total_tokens": 15881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 13259,
        "total_tokens": 15881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, **M₅ and M₆ are the PMOS devices in the two cross-coupled inverters** (with M₃ and M₄) that form the regenerative latch at nodes X and Y.\n\nIf you increase the widths of M₅ and M₆:\n\n**The speed degrades.**\n\n**Why:**\n- **Increased capacitive loading:** Widening M₅ and M₆ increases both their **drain diffusion capacitance** at nodes X and Y and their **gate capacitance** (the gate of M₅ loads node Y, and the gate of M₆ loads node X). These are the critical nodes that must discharge and regenerate quickly.\n- **Slower initial discharge:** During evaluation, X and Y start near VDD and must be pulled down through M₃/M₄. The heavier capacitive load slows this initial voltage separation.\n- **Limited benefit on pull-up:** Although wider M₅/M₆ can pull the “high” side up more strongly once regeneration begins, they are **initially off** (since X ≈ Y ≈ VDD). Thus they do not help the crucial first phase of evaluation, and the extra loading dominates.\n\nIn short, the **parasitic capacitance at X and Y grows proportionally with W**, slowing both the initial integration and the regeneration time constant, so the overall comparator/latch speed gets worse. (This is why in StrongARM-style designs these load devices are usually kept relatively small.)",
        "format": "markdown",
        "sha256": "0f05b748eb16f8cb72d0a2802e5f1906e7fc4254e64c140b94df8524b9451532"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled PMOS devices and notes that their added capacitance can eventually limit speed. But it reaches the opposite initial trend: stronger regeneration from wider devices improves speed over the initial sizing range, before capacitance becomes dominant.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 11783,
        "total_tokens": 14405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 11783,
        "total_tokens": 14405,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, this is a clocked dynamic/C²MOS stage (left and right) with an inverter **Inv₃** driving the output **Z** from node **Y**. The transistors with **CK / CK̄** on their gates are the clocked precharge/evaluation (or transmission-gate) devices.\n\nIf you increase the widths of these clocked transistors:\n\n**The speed degrades.** Here is why:\n\n1. **They are in series with the signal path**  \n   The clocked devices sit in series with the pull-up/pull-down networks (or with the inverter path). Halving their resistance does **not** halve the total path resistance, because the other transistors (the logic network and **M₁**) still dominate.\n\n2. **Diffusion capacitance on nodes X and Y grows**  \n   Wider transistors have larger source/drain diffusion areas. This adds directly to the load capacitance at the internal nodes **X** and **Y**. Since **Y** is the input to inverter **Inv₃**, a larger **C_Y** means **Inv₃** is slower.\n\n3. **Heavier clock loading**  \n   The gate capacitance of these transistors loads the **CK / CK̄** drivers. Wider gates make the clock edges slower, increasing the clock-to-output delay.\n\n4. **Net RC effect**  \n   The delay is roughly **R_total · C_load**. While **R** of the clocked device drops slightly, **C_load** at **X** and **Y** increases proportionally with width. Because **R_total** is not reduced much (series connection), the product **R·C** actually gets worse.\n\nSo, widening the clocked transistors mainly adds parasitic capacitance to the critical internal nodes and to the clock lines without providing a proportional reduction in path resistance. **The circuit becomes slower.** They should be kept near minimum (or optimally sized) rather than made arbitrarily wide.",
        "format": "markdown",
        "sha256": "26281365ddfa40881dc8e0f15ddc72e965a2ac8674d0f56ea1e60b3c848de7ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the added node capacitance, but concludes that widening the clocked transistors degrades speed. The key initial effect is lower on-resistance, which improves speed before added capacitance eventually limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 8944,
        "total_tokens": 11067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 8944,
        "total_tokens": 11067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have two clocked inverter stages (left and right) that drive the internal nodes **X** and **Y**, followed by inverter **Inv₃** (Y → Z) with feedback to the left stage. In each stack the clocked transistors sit in series with the logic transistors (the PMOS/NMOS pair gated by Z or X) and the bottom transistor **M₁**.\n\n### Why widening the clocked transistors hurts speed\n\n1. **Fixed drive resistance, growing load capacitance**  \n   The logic transistors (gated by Z or X) have fixed widths. Their on-resistance is therefore constant. The clocked transistors are in series with them, so the total pull-up/pull-down resistance is  \n   $$R_{\\text{eq}} \\approx R_{\\text{logic}} + R_{\\text{clock}}$$  \n   If $W_{\\text{clock}}$ is increased, $R_{\\text{clock}}$ drops, but $R_{\\text{logic}}$ does **not** change. Meanwhile, the source/drain diffusion areas of the clocked transistors are connected directly to nodes **X** and **Y**. Those diffusion capacitances are proportional to $W_{\\text{clock}}$. Hence the load at X and Y becomes  \n   $$C_X, C_Y \\propto W_{\\text{clock}}$$  \n   The stage delay is roughly $\\tau \\approx R_{\\text{logic}}\\,C_{\\text{load}}$. Because $R_{\\text{logic}}$ is unchanged while $C_{\\text{load}}$ grows linearly with $W_{\\text{clock}}$, the RC delay of the driving stage **increases**.\n\n2. **Clock-loading penalty**  \n   The gates of all four clocked transistors are driven by **CK** and **$\\overline{\\text{CK}}$**. Making them wider directly increases the capacitive load on the clock network, slowing the clock edges and degrading the overall cycle time.\n\n3. **Miller/feedthrough effects**  \n   Larger clocked transistors have larger gate-drain overlap capacitances ($C_{gd}$). This strengthens the coupling of clock transitions onto the dynamic nodes X and Y, causing larger clock feedthrough glitches that can require longer evaluation/precharge windows.\n\n### Conclusion\nAlthough wider clocked transistors have lower individual on-resistance, they do **not** reduce the resistance of the fixed logic transistors that actually drive nodes X and Y. Instead, they significantly increase the parasitic diffusion capacitance at those nodes and burden the clock driver. Consequently, the circuit becomes **slower**.\n\n**Answer: The speed degrades.**",
        "format": "markdown",
        "sha256": "046777a3fc279cfc3913aa2cd1073c91bed6b494b80d0d72ef5efd4fb1fd193b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes that widening the clocked devices lowers their on-resistance and adds capacitance, but concludes that speed degrades. The golden solution says widening improves speed initially, with capacitance limiting or reversing the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 14726,
        "total_tokens": 16849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 14726,
        "total_tokens": 16849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a **master–slave C²MOS latch/flip-flop** formed by two clocked inverters (left and right) with nodes **X** and **Y**, followed by an output inverter **Inv₃** (Y → Z). The four transistors with clock signals **CK** / **CK̄** on their gates are the clocked supply transistors (PMOS on top, NMOS on bottom) that switch the two inverters on and off.\n\nIf we increase the widths (W) of these clocked transistors:\n\n| Effect | Consequence |\n|--------|-------------|\n| **Lower on-resistance** | The inverters can drive a bit more current once turned on. |\n| **Much larger gate capacitance** | The clock driver must charge/discharge bigger gates → **slower clock edges**. |\n| **Larger diffusion (C<sub>db</sub>, C<sub>sb</sub>)** | The parasitic capacitance at the internal nodes **X** and **Y** grows proportionally. |\n| **Stronger clock feedthrough** | The gate-drain overlap capacitance (C<sub>gd</sub>) couples the clock transitions onto **X** and **Y**. With wider devices this coupling is larger, causing bigger voltage disturbances on the floating nodes when the clock turns off. |\n\nBecause **Y** is the input to **Inv₃**, the extra diffusion capacitance at **Y** directly increases the load that must be settled. The benefit of lower series resistance is quickly outweighed by:\n\n1. **Slower clock transitions** (heavier clock load).\n2. **Higher self-loading** at nodes X and Y.\n3. **Worse clock feedthrough**, which lengthens the settling time of Y before **Z** becomes valid.\n\nTherefore, **the speed degrades**. There is an optimal size for the clocked devices (typically comparable to the logic transistors); making them arbitrarily wider hurts performance rather than helping it.",
        "format": "markdown",
        "sha256": "c3425970c439ef51b77f48d2f2e8cdf003d69ca408ac78289af712054d932101"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that wider clocked transistors lower on-resistance and add capacitance, but concludes speed degrades. The golden solution says speed initially improves as on-resistance falls, with added capacitance limiting or reversing the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 15133,
        "total_tokens": 17256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 15133,
        "total_tokens": 17256,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14708,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have two symmetric clocked paths (left and right) producing nodes **X** and **Y**, plus an inverter **Inv₃** that generates **Z = Ȳ**.\n\n**Why it does NOT provide quadrature outputs:**\n\n1. **Only 0°/180° relationships exist:** The clock inputs are **CK** and **C̄K** (180° apart). The only explicit inversion is **Inv₃**, which makes **Z** the complement of **Y** (another 180° shift). There is no mechanism—no quadrature clock (e.g., 90°-shifted phases) and no frequency-division coupling—that creates a 90° phase shift between outputs.\n\n2. **X and Y are not in quadrature:** Both sides are driven by the same clock pair (**CK/C̄K**) through identical transistor networks. The cross-coupling feedback (through the top PMOS devices and bottom **M₁** devices) forms a clocked latch/storage pair, meaning **X** and **Y** are either:\n   - The same logic value (available on opposite clock phases), or\n   - Complementary (**X ≈ Ȳ**).\n\n   They do **not** have the required 90° (quadrature) separation.\n\n3. **Available outputs are X, Y, and Z (=Ȳ):** This gives at most two phases (0° and 180°). True quadrature requires four phases separated by 90° (0°, 90°, 180°, 270°), or at least an I/Q pair with 90° separation. Here we only have **Y** and its inverse **Z**, plus **X** which tracks **Y** (or its complement).\n\n**Conclusion:** No. The structure provides differential/complementary outputs (**Y** and **Z**), but it lacks the 90° phase-shifted outputs needed for quadrature (I/Q) operation.",
        "format": "markdown",
        "sha256": "e94d2952910c7ae75c2cc3d552bc385351d8759d14d917c089efd4275704e9c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly denies quadrature and misses the C2MOS divide-by-two: the opposite-phase latches switch half an input period apart, giving nominal quadrature. Its claims that there is no frequency-division coupling and that the outputs are only 0°/180° are wrong.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 14746,
        "total_tokens": 16854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 14746,
        "total_tokens": 16854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit, **yes, it does provide quadrature outputs** (specifically at nodes **X** and **Y**, with **Z** being the complement of Y).\n\nThis is a **quadrature clock divider** (divide-by-2 with 90° outputs). Here is why:\n\n**Circuit topology**\n- The left and right halves are symmetric clocked stages (latches/dynamic gates) controlled by opposite clock phases: **CK** and **CK̄**.\n- The bottom NMOS devices (**M₁**) are gated by **X** and **Y**, respectively.\n- The top devices are loaded by the feedback path.\n- **Inv₃** inverts **Y** to produce **Z**, and **Z** is fed back to the left stage.\n\n**Operation**\nThis forms a closed loop:\n**Z → Left latch → X → Right latch → Y → Inverter → Z**\n\nBecause the two stages are clocked on opposite edges:\n- **X** updates on the rising edge of **CK** (every full clock period **T**).\n- **Y** updates on the falling edge of **CK** (offset by **T/2**).\n\nBoth **X** and **Y** toggle at **f_CLK/2** (period **2T**), but their transitions are separated by **T/2** — exactly one-quarter of their output period, i.e., **90° (quadrature)**.\n\nTracing the states confirms the toggle behavior:\n| Time | Event | X | Y | Z (=Ȳ) |\n|------|-------|---|---|--------|\n| 0 | CK↑ | ← Z | — | — |\n| T/2 | CK↓ | — | ← X | ← Ȳ |\n| T | CK↑ | ← Z | — | — |\n| 3T/2 | CK↓ | — | ← X | ← Ȳ |\n\nThus **X** and **Y** are square waves at half the clock frequency with a **90° phase shift**. **Z** is 180° from **Y**, so **X** and **Z** are also in quadrature.\n\n**Conclusion:** The structure is a master-slave toggle loop that divides the clock by 2 and makes the intermediate nodes **X** and **Y** available as quadrature (I/Q) outputs, while **Z** provides an explicit inverted quadrature signal.",
        "format": "markdown",
        "sha256": "4382d5e2f95b2dc7d2e77b72628fd6fe5a53bf4cf1d5718e20195f17fb462805"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature from the latches switching on opposite clock phases, but claims exact quadrature and omits both causes of phase error: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 8989,
        "total_tokens": 11097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 8989,
        "total_tokens": 11097,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit, **yes, it provides quadrature outputs** (specifically X and Y, with Z being the complement of Y).\n\nThis is a **quadrature frequency divider (÷2)** built from two cross-coupled CML (Current-Mode Logic) latches:\n\n**Why it generates quadrature signals:**\n- **Left latch** (output X) is clocked by $\\overline{CK}$/CK\n- **Right latch** (output Y) is clocked by CK/$\\overline{CK}$ (swapped)\n- The latches are **cross-coupled**: X drives the right latch and Y drives the left latch\n- Tail current sources are M₁ (bottom NMOS)\n\n**Operation:**\nWhen CK is high, the left latch is transparent and updates X based on $\\overline{Y}$. When CK is low, the right latch becomes transparent and updates Y based on X. This creates a toggle loop with period 2T (where T is the clock period).\n\nBecause the two latches update on **opposite clock edges** (rising vs. falling), both X and Y run at **f/2**, but they are offset by T/2 — exactly **90° (quadrature)** relative to each other.\n\n**Outputs available:**\n- **X** → 0° phase\n- **Y** → 90° phase  \n- **Z** = $\\overline{Y}$ (via Inv₃) → 270° (or –90°)\n\nSo the structure indeed produces quadrature outputs at half the input clock frequency. (The complementary $\\overline{X}$ at 180° is implicitly available at the differential left node if needed.)",
        "format": "markdown",
        "sha256": "f5999d8d5c09ca6271a1d35dbb323463d4a77c78442132df6a81a8d1bb7d37ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock edges, but incorrectly calls the circuit cross-coupled CML and claims exact quadrature. It omits both the Inv3 delay and unequal latch loading that prevent exact quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 7147,
        "total_tokens": 9255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 7147,
        "total_tokens": 9255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6785,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit, we have a **clocked CMOS latch/flip-flop** (master-slave structure) where four transistors are driven by the clock:\n- **Top**: Two PMOS transistors (gates $\\overline{CK}$ and $CK$) connected to $V_{DD}$\n- **Bottom**: Two NMOS transistors (gates $CK$ and $\\overline{CK}$) connected to GND\n\nThe middle cross-coupled pair forms the storage/evaluation logic, and there's an output inverter on the right.\n\n## The Trade-off\n\nIf we increase the width ($W$) of these clocked transistors:\n\n| Effect | Consequence |\n|--------|-------------|\n| **Lower $R_{on}$** | The transistor can drive current better ($R \\propto 1/W$) |\n| **Higher gate capacitance $C_g$** | The clock driver must drive a larger load ($C_g \\propto W$) → **slower clock edges** |\n| **Higher diffusion capacitance $C_d$** | The source/drain regions are larger ($C_d \\propto W$), adding load to the internal nodes and to ground/$V_{DD}$ |\n\n## The Key Insight\n\nFor the clock transistor itself, the RC product is **constant**:\n$$R_{on} \\cdot C_d \\propto \\frac{1}{W} \\cdot W = \\text{constant}$$\n\nSo **making them wider does NOT reduce the delay contribution of the clock transistor in the evaluation path**. Meanwhile:\n1. The clock line is loaded more heavily, slowing the clock signal that controls the entire circuit.\n2. The internal nodes see larger parasitic capacitance from the wider diffusion regions.\n3. The benefit of lower resistance is canceled out by the proportional increase in capacitance.\n\n## Answer\n\n**The speed degrades (gets worse).**\n\nThe clocked transistors should be sized just large enough to avoid being the bottleneck, but increasing them further only hurts performance by increasing clock load and parasitic diffusion capacitance without improving the intrinsic RC delay of the evaluation path.",
        "format": "markdown",
        "sha256": "4136f955ed3b975665e80a5d300a70ea49eb07a88bbd7586b43a819c80800652"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked transistors degrades speed, contrary to the correct result: their lower resistance improves speed because they add little loading to the data path. It misses the topology-specific role of charge sharing as an acceptable limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4558,
        "output_tokens": 12366,
        "total_tokens": 16924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 6183,
        "total_tokens": 8462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5732,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a **master–slave C²MOS latch** (two cross-coupled inverters with clocked PMOS/NMOS power switches at the top and bottom, plus an output inverter on the right).\n\nThe four “clocked” transistors (gated by CK and CK̄) sit in series with the inverter transistors, connecting them to VDD and ground during evaluation.\n\n### Short answer\n**The overall speed tends to degrade** (or at best does not improve) if you simply widen those clock transistors, even though their on-resistance drops.\n\n### Why?\n\n| Effect of wider clock transistors | Consequence |\n|---|---|\n| **Lower R<sub>on</sub>** | The evaluation/precharge path resistance is reduced, which by itself would speed up charging/discharging of the load. |\n| **Proportional increase in diffusion & gate capacitance** | The source/drain junction capacitances at the internal nodes (between the clock transistor and the logic inverter) grow with W. The RC product of the clock transistor itself (R<sub>ck</sub>·C<sub>int</sub>) stays **constant**, so the intrinsic delay contribution of the clock device does not improve. |\n| **Much heavier clock load** | The gate oxide capacitance C<sub>g</sub> of the clock transistors loads the CK/CK̄ drivers. Wider devices mean slower clock edges, delaying the start of evaluation for every gate on that clock net. |\n| **Increased clock feedthrough** | The gate-drain overlap capacitance C<sub>gd</sub> couples clock transitions onto the floating internal nodes (Node L and Node R). In a master–slave latch, one side is floating (holding state) while the other evaluates. A larger C<sub>gd</sub> injects more charge, causing larger voltage spikes that can corrupt the stored state or require longer settling times. |\n\n### Quantitative intuition\nThe Elmore delay for pulling an output node low is roughly\n\nτ ≈ R<sub>ck</sub>(C<sub>int</sub> + C<sub>L</sub>) + R<sub>inv</sub>C<sub>L</sub>\n\nIf W<sub>ck</sub> is scaled by S:\n- R<sub>ck</sub> → R<sub>ck</sub>/S\n- C<sub>int</sub> → S·C<sub>int</sub>\n\nThe term R<sub>ck</sub>C<sub>int</sub> is unchanged, and only the term R<sub>ck</sub>C<sub>L</sub> shrinks (by ~1/S). So the **evaluation-speed gain is small** (proportional only to the external load C<sub>L</sub>), while the **penalty on the clock driver and on feedthrough grows linearly with S**.\n\n### Bottom line\nIn clocked CMOS logic like this latch, the clock transistors are usually kept at **minimum (or near-minimum) size**. Making them wider lowers their resistance, but the benefit is canceled (and usually overwhelmed) by:\n1. Heavier clock loading → slower clock edges,\n2. Larger internal-node diffusion capacitance,\n3. Worse clock feedthrough onto the floating latch nodes.\n\nHence, **increasing their widths degrades the overall operating speed/reliability** of the circuit.",
        "format": "markdown",
        "sha256": "50a9748371a2cd537efc8d990394d4b249d7041627fdba01040c4cf4ee40c9c0"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked transistors degrades speed, opposite to the golden solution: their lower on-resistance improves speed because they add little loading to the data path. It also misses that charge sharing is an acceptable limitation up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4558,
        "output_tokens": 41252,
        "total_tokens": 45810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39806,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 20626,
        "total_tokens": 22905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, this is a **clocked CMOS (C²MOS) or differential dynamic gate** with clocked PMOS devices at the top (gates $\\overline{CK}$ and $CK$) and clocked NMOS devices at the bottom (gates $CK$ and $\\overline{CK}$), a logic/pull-down network in the middle, and an output inverter on the right.\n\nIf you increase the widths of these four clocked transistors, the speed **degrades**. Here is why:\n\n| Effect of wider clock transistors | Consequence |\n|---|---|\n| **Lower $R_{on}$** | The series resistance to $V_{DD}$ and ground is reduced, which *seems* beneficial. |\n| **Much larger gate capacitance** | The clock lines $CK$ and $\\overline{CK}$ now present a heavier load. The clock driver must charge/discharge larger gates, so the clock edges become **slower**. Since the gate only evaluates on these edges, the overall cycle slows down. |\n| **Larger diffusion (source/drain) capacitance** | The internal nodes (left and right) see increased parasitic capacitance $C_{diff}$. This makes the nodes harder to charge during precharge and harder to discharge during evaluation. |\n| **Increased clock feedthrough** | The gate-to-drain/source coupling ($C_{gd}$, $C_{gs}$) is larger, injecting more clock noise onto the dynamic nodes and potentially causing false switching. |\n\n**Key design point:** In C²MOS/dynamic logic, the clocked transistors act only as switches; the logic evaluation speed is dominated by the **logic network** in the middle and the load being driven (the inverter). Reducing the switch resistance by widening them gives only a marginal improvement in drive, while the **capacitive penalties on both the clock network and the internal nodes dominate**. Therefore, clocked transistors are usually kept at or near **minimum width**.\n\nSo, widening them makes the clock slower and the internal nodes more capacitive — **the circuit becomes slower**.",
        "format": "markdown",
        "sha256": "f7f83ad0e8cf993027fc6c3929ae30006663012b8640b866dad415f3481b8496"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that speed degrades, contrary to the correct result that widening the clocked devices improves speed by reducing series resistance with little added loading on the data path or outputs. Charge sharing can degrade swing, but is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4558,
        "output_tokens": 16814,
        "total_tokens": 21372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 8407,
        "total_tokens": 10686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7960,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the diagram, here is the step-by-step analysis of the circuit arrangement:\n\n### 1. Components and Topology\nThe circuit contains **three inverter gates** arranged horizontally:\n- **Inv₁** (left, explicitly labeled)\n- **Inv₂** (middle-right)\n- **Inv₃** (far right)\n\nThe connections form a **closed loop**:\n- The output of Inv₁ drives the input of Inv₂.\n- The output of Inv₂ drives the input of Inv₃.\n- The output of Inv₃ is routed downward and then leftward along the bottom wire, feeding back to the input of Inv₁.\n\nSmall open circles on the lines are connection nodes/taps; the filled bubbles are the inverter outputs indicating logical negation.\n\n### 2. Signal Labels\n- The node at the input of Inv₁ is labeled **CK** (the clock signal).\n- The node at the output of Inv₁ is labeled **CK̄** (the inverted clock).\n\nFollowing the chain:\n- Input to Inv₂ = CK̄ → Output of Inv₂ = **CK**\n- Input to Inv₃ = CK → Output of Inv₃ = **CK̄**\n\nThus, traversing all three stages applies **three successive inversions**.\n\n### 3. Logical / State Analysis\nBecause the loop contains an **odd number (3) of inverters**, there is **no stable logic state**:\n- If CK = 0, then after three inversions the feedback forces CK = 1.\n- If CK = 1, the feedback forces CK = 0.\n\nThe condition CK = CK̄ is impossible, so the circuit cannot settle. Instead, it is **astable** (unstable).\n\n### 4. Dynamic Behavior — Ring Oscillator\nThe circuit functions as a **3-stage ring oscillator**:\n- A logic transition propagates continuously around the loop.\n- Each inverter contributes a propagation delay, $t_d$.\n- It takes **6 inverter delays** for the signal to return to its original state (3 inversions to flip, then 3 more to flip back).\n\nTherefore, the oscillation period is:\n$$T = 6t_d \\quad \\Rightarrow \\quad f = \\frac{1}{6t_d}$$\n\nThe waveform at each node is approximately a square wave with a ~50% duty cycle (assuming matched inverters).\n\n### 5. Phase Outputs\nThe three nodes provide clock signals with different time delays (separated by $2t_d = T/3$):\n- **Node 1 (Inv₁ input):** CK\n- **Node 2 (Inv₁ output):** CK̄\n- **Node 3 (Inv₂ output):** CK (delayed by $2t_d$)\n- **Node 4 (Inv₃ output):** CK̄ (delayed by $4t_d$)\n\nSo the arrangement generates not only the primary clock and its complement but also **multi-phase clock signals** (separated by 120° in the time domain).\n\n### Summary\nThe figure depicts a **3-inverter ring oscillator** with feedback. The explicit labeling of **CK** and **CK̄** at the first stage indicates that this circuit is used as an **on-chip clock generator**, producing a periodic square-wave clock and its inverse, with additional delayed phases available at the intermediate nodes. Because of the odd number of stages, it has no DC stable point and oscillates continuously.",
        "format": "markdown",
        "sha256": "07b26d2147a79d233cd3f19d9378197a97bfb3fff620a08887dcfce48a187dee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a three-inverter ring oscillator; the figure is a divide-by-two built from dynamic latches.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 7146,
        "total_tokens": 9146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 7146,
        "total_tokens": 9146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the diagram, we can trace the connections precisely:\n\n**1. Circuit Topology**\n- There are **three inverter gates** arranged in a closed loop.\n- **Inv₁** (left) has its input at the node labeled **CK** and its output at the node labeled **$\\overline{CK}$**.\n- The signal $\\overline{CK}$ is then fed into a second inverter (center-right), whose output drives a third inverter (far right).\n- The output of the third inverter is routed back via the bottom wire to the original **CK** node, closing the loop.\n\nThe small open circles on the horizontal line are just connection nodes (taps), and the small circles on the inverter outputs are the standard inversion bubbles.\n\n**2. What kind of circuit is this?**\nThis is a **3-stage ring oscillator**. Because the loop contains an **odd number (3)** of inverting stages, the total loop gain is negative (three inversions = one net inversion). This means there is **no stable DC operating point**—the circuit cannot settle to a constant logic level. Instead, any noise or initial imbalance is amplified and circulated around the loop, causing continuous oscillation.\n\n**3. Signal behavior**\nIf each inverter has a propagation delay $t_{pd}$:\n- The period of oscillation is approximately  \n  $$T \\approx 6t_{pd} = 2N t_{pd} \\quad (N=3)$$\n- The three nodes produce square-wave signals with **~50% duty cycle**.\n- Adjacent nodes are logical complements, separated in time by $T/3$ (i.e., **120° phase shift**).\n\nSpecifically for the labeled nodes:\n- **CK** and **$\\overline{CK}$** are separated by exactly one inverter stage ($t_{pd}$), so they are complementary square waves.\n- Because of the feedback through the remaining two inverters, $\\overline{CK}$ eventually propagates back to influence CK after a total delay of $3t_{pd}$, sustaining the oscillation.\n\n**4. Key features of the layout**\n- The rectangular outline (bottom and side wires) is the **feedback path** that connects the final inverter back to the input.\n- The taps at CK and $\\overline{CK}$ allow these two complementary phases to be extracted and used elsewhere (e.g., for clocking flip-flops or generating non-overlapping clock phases).\n\n**Summary:** The figure shows a **three-inverter ring oscillator** configured to generate self-sustaining clock signals. The nodes CK and $\\overline{CK}$ provide the primary clock and its inverse, while the closed loop ensures continuous periodic switching with a frequency determined by the inverter delays.",
        "format": "markdown",
        "sha256": "24975a53c221d8e715b8c37ec10edf585f8079f2135abef7543cfec96e2e830b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a three-inverter ring oscillator. The figure is a divide-by-two circuit built from dynamic latches, so it misses the essential topology and function.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 7670,
        "total_tokens": 9670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 7670,
        "total_tokens": 9670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the diagram, we can trace the connections and identify the building blocks:\n\n### 1. Components and layout\n- **Three inverter gates** are arranged horizontally:\n  - **Inv₁** on the left (explicitly labeled).\n  - A second inverter in the middle-right.\n  - A third inverter on the far right.\n- Each inverter is drawn as a triangle with a bubble on its output (standard NOT gate symbol).\n- **Signal nodes (dots)** are placed on the horizontal line between them.\n- A **feedback path** runs from the output of the rightmost inverter down the right side, across the bottom, and up the left side back to the leftmost node.\n\n### 2. Signal labeling\n- **CK** is taken at the leftmost node (the input to Inv₁).\n- **CK̄** (CK-bar) is taken at the node immediately after Inv₁ (the output of Inv₁).\n\nSo the chain is:\n\n\\[\n\\text{CK} \\;\\xrightarrow{\\text{Inv}_1}\\; \\overline{\\text{CK}} \\;\\xrightarrow{\\text{Inv}_2}\\; \\text{CK} \\;\\xrightarrow{\\text{Inv}_3}\\; \\overline{\\text{CK}} \\;\\xrightarrow{\\text{feedback}}\\; \\text{CK}\n\\]\n\n### 3. Logical analysis\nLet the three internal nodes be:\n- \\(X\\) = CK (input to Inv₁)\n- \\(Y\\) = \\(\\overline{\\text{CK}}\\) (output of Inv₁)\n- \\(Z\\) = output of Inv₂ = \\(X\\)\n- \\(W\\) = output of Inv₃ = \\(\\overline{X}\\)\n\nThe feedback forces \\(X = W = \\overline{X}\\).\n\nThis gives the contradiction:\n\\[\nX = \\overline{X}\n\\]\n\nBecause there is an **odd number (3)** of inversions around the closed loop, **no stable logic state exists**.\n\n### 4. What the circuit actually does\nThis is a **3-stage ring oscillator** (a clock generator).\n\n- Any small noise or transition starts a chain of inversions around the loop.\n- The signal propagates continuously:\n  \\[\n  \\text{CK} \\to \\overline{\\text{CK}} \\to \\text{CK} \\to \\overline{\\text{CK}} \\to \\dots\n  \\]\n- The loop delay determines the oscillation period:\n  \\[\n  T \\approx 6\\,t_{pd}\n  \\]\n  where \\(t_{pd}\\) is the propagation delay of one inverter.\n\n### 5. Output characteristics\n- **CK** and **CK̄** are complementary square waves.\n- They are separated by exactly one inverter delay.\n- The other two nodes (outputs of Inv₂ and Inv₃) are also square waves, phase-shifted by about 120° relative to each other inside the loop, but only CK and CK̄ are brought out as labeled outputs.\n\n---\n\n**Summary:** The figure shows a **ring oscillator made of three inverters in a closed loop**, with taps taken before and after the first inverter to provide the complementary clock pair **CK** and **CK̄**. Because the loop contains an odd number of inversions, the circuit cannot settle and instead generates a continuous oscillating clock signal.",
        "format": "markdown",
        "sha256": "1cb5a11446ad59b1b539482d3ec6bc9c55090a06bdce9ac1a5361170efda568b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a three-inverter ring oscillator. The figure is a dynamic-latch divide-by-two circuit, so the topology and function are fundamentally wrong.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 4804,
        "total_tokens": 6804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 4804,
        "total_tokens": 6804,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4085,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, the **red inverter is wired in parallel with Inv₁**: both take the same input (**CK**) and both drive the same output node (**CK̄**).\n\nThis parallel configuration affects performance in several ways:\n\n| Effect | Impact |\n|--------|--------|\n| **Drive strength / Transition time** | Doubling the inverter drive lowers the effective output resistance, so **CK̄ has sharper (faster) rise/fall edges** and can drive a larger capacitive load with less delay. |\n| **Clock skew / Delay** | The delay from CK → CK̄ is reduced (or made more robust), which can help **balance skew** between the CK and CK̄ branches of the clock tree. |\n| **Input loading** | The CK line now sees **twice the gate capacitance** (two inverter inputs instead of one), which slows the preceding stage and increases power. |\n| **Power consumption** | Dynamic power is roughly doubled for that stage because both inverters switch every clock cycle. |\n| **Contention / Matching** | If the two inverters are not perfectly matched (due to process variation or sizing), they can briefly fight each other during transitions, causing a small **glitch or extra short-circuit current**. |\n\nIn short, the red inverter acts as a **stronger buffer for CK̄**—it improves edge rate and drive capability at the cost of higher input load on CK and increased power. In clock-distribution designs, this is often done intentionally to match the drive strength of the CK path (which runs through the three black inverters on the right) so that both clock phases arrive with similar slew rates.",
        "format": "markdown",
        "sha256": "2afd54c5671940c290504fb4cad601dff6e551c2b3ee2805fcf385e35fd214ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the red inverter as a parallel clock buffer. It actually forms an unclocked feedforward path that bypasses part of the first latch: this improves high-speed operation but raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 11241,
        "total_tokens": 12986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 11241,
        "total_tokens": 12986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, the **red inverter** sits in the clock path near the input (CK) and drives the node that produces **CK̄** (the inverted clock), while the black inverters form the distribution/delay chain (and the bottom wire closes a feedback loop, suggesting a ring-oscillator or clock-generator structure).\n\nIts main performance impacts are:\n\n| Effect | Explanation |\n|--------|-------------|\n| **Creates the complementary phase** | It inverts CK to generate CK̄. Without it, there is no inverted clock for the downstream chain. |\n| **Adds propagation delay (clock skew)** | Every inverter has a delay (tₚₕₗ / tₚₗₕ). This inserts a time offset between CK and CK̄. If that delay is not perfectly matched to other paths, the two phases arrive misaligned at flip-flops, reducing timing margins. |\n| **Duty-cycle distortion** | Real inverters have asymmetric rise/fall times and drive different loads. The red inverter can make the high/low periods of CK̄ unequal, so the clock is no longer exactly 50/50. |\n| **Sets/affects oscillation frequency** | If this inverter is part of the feedback loop (together with the three black inverters and the bottom wire), the total loop delay is ~4·tₚd, so the clock frequency is f ≈ 1/(2N·tₚd). Its specific sizing and load therefore directly determine the generated clock speed. |\n| **Power & noise** | It consumes dynamic power (CV²f). The long red interconnect shown also adds RC delay and can couple noise into the clock line. |\n\n**In short:** The red inverter is essential for producing the inverted clock, but it is also the primary source of **delay mismatch and duty-cycle error** between CK and CK̄. In high-performance designs, its size and layout are usually matched carefully (or replaced by a symmetric transmission-gate / differential pair) to minimize skew and keep the duty cycle near 50%.",
        "format": "markdown",
        "sha256": "b555dd32b789ea1bcb8961666bb097d7195500b4016da4b677959e079971c7c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a clock-generation/distribution element and misses the actual feedforward path around the first latch, its speed benefit, and its low-frequency drawback. Its discussion of skew, duty cycle, and ring-oscillator frequency does not apply to the described topology.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 7655,
        "total_tokens": 9400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 7655,
        "total_tokens": 9400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, the black inverters form a chain: **Inv₁** generates $\\overline{CK}$, then two more inverters (**Inv₂**, **Inv₃**) drive the signal to the right. The wire along the bottom feeds that output back to the left—**but it does not go directly to the input**. Instead, it enters the **red inverter**, whose output drives the $\\overline{CK}$ node.\n\nThis means the red inverter closes a feedback loop:\n\n$$\\overline{CK} \\;\\rightarrow\\; \\text{Inv}_2 \\;\\rightarrow\\; \\text{Inv}_3 \\;\\rightarrow\\; \\text{(bottom wire)} \\;\\rightarrow\\; \\color{red}{\\text{Red Inv}} \\;\\rightarrow\\; \\overline{CK}$$\n\nThat loop contains **three inverters** (red + Inv₂ + Inv₃), so the circuit is a **3-stage ring oscillator**. Meanwhile, the external clock $CK$ is injected into the $\\overline{CK}$ node through Inv₁—making this an **injection-locked ring oscillator (ILRO)**.\n\n### How the red inverter affects performance:\n\n| Effect | Explanation |\n|--------|-------------|\n| **Sets the free-running frequency** | The oscillation period is roughly $T \\approx 6t_d$ (where $t_d$ is the delay of one inverter). The red inverter’s delay is one-third of the total loop delay, so its sizing and speed directly determine the clock frequency. |\n| **Closes the loop** | Without it, the feedback path from Inv₃ back to $\\overline{CK}$ is open; the ring would not oscillate. |\n| **Drives the injection node** | Because its output is at $\\overline{CK}$—the exact point where the external $CK$ is injected via Inv₁—its drive strength strongly influences the **locking range**, **lock time**, and **jitter/phase noise**. A stronger (or weaker) red inverter changes how easily the external clock can “pull” the oscillator into lock. |\n| **Power & contention** | At $\\overline{CK}$, both Inv₁ (driven by $CK$) and the red inverter (driven by the delayed feedback) can drive the node simultaneously. Depending on sizing, this can cause brief contention current, affecting power consumption and signal integrity. |\n\nIn short: **the red inverter is not just a buffer—it is an essential oscillating stage.** Its delay sets the clock frequency together with Inv₂ and Inv₃, and because it drives the injection point $\\overline{CK}$, it critically determines the locking behavior and jitter performance of the clock generator.",
        "format": "markdown",
        "sha256": "4fbd987e9ec012491801998008c224dc7bde1f47e9fa7595dbcdcc15fc905c15"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter's connection and treats it as an essential injection-locked ring oscillator. It misses the key feedforward bypass that improves divider speed and the low-frequency drawback that raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3209,
        "output_tokens": 20734,
        "total_tokens": 23943,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 14865,
        "total_tokens": 16610,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14287,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that explanation.** The red inverter is **not** a keeper, and it does **not** form a cross-coupled latch with `Inv1`.\n\n### Actual role: local clock inversion (CK → CK̄)\n\nThe circuit is a **transmission-gate master–slave flip-flop**:\n- `Inv1` is the master inverter.\n- The two inverters on the right (`Inv2` + `Inv3`) form the slave latch.\n- The left and middle switches are transmission gates controlled by `CK` and `CK̄`.\n\nOnly one clock input (`CK`) enters from the left, but both phases are needed to drive the two transmission gates. The red inverter sits right at the clock entry point; it takes `CK` and produces `CK̄` (labeled `CK̄` at the middle gate). Its output is routed to control the slave-stage transmission gate.\n\nSo its purpose is purely **to generate the complementary clock locally**.\n\n### Why the “keeper” answer is wrong\n\n1. **Connections:** A keeper would have to be wired in feedback between the input and output nodes of `Inv1`. The red inverter is instead driven from the `CK` line and its output is sent toward the `CK̄` control node—not back to `Inv1`’s input/output nodes.\n2. **No leakage protection:** Because there is **no** weak feedback inverter around `Inv1`, the node between the left transmission gate and `Inv1` is **floating** whenever `CK` is low. Charge can leak away during the hold phase, and `Inv1` can then drive the wrong value into the slave latch through the closed (CK̄-high) transmission gate.\n3. **Consequence:** Far from “removing the minimum clock frequency requirement,” this circuit **has** one (or at least a maximum allowable clock-low/high time). If the clock stops or runs too slowly, leakage corrupts the dynamic master node.\n\nIn short: the red inverter is the **local CK̄ generator**, and the master stage remains dynamic—so the leakage-related clock-frequency limitation is present, not eliminated.",
        "format": "markdown",
        "sha256": "c5be9485a836dafc405c67c8ae04400bac17ab91fb387400186a9c8959d8be01"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper/cross-coupled-latch interpretation, but misidentifies the red inverter as a CK̄ generator. In the actual circuit it is an unclocked feedforward branch that bypasses part of the latch path, improving high-speed operation but potentially overpowering the intended behavior at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 19920,
        "total_tokens": 21710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 19920,
        "total_tokens": 21710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** Yes – the explanation is essentially correct, though it helps to be precise about *where* the feedback is connected and *why* it must be weak.\n\n**What the red inverter actually does**\n\nThe circuit is a **dynamic (clocked) toggle / shift-register stage**.  \nDuring one clock phase the transmission gate on the left is ON and the one on the right is OFF, so the value is sampled onto node **A** (the input of `Inv1`) and `Inv1` drives node **B**. During the opposite phase the left gate is OFF, leaving node **A floating** (it holds its value only on gate capacitance), while node **B** drives the rest of the loop (`Inv2` → `Inv3` → feedback).\n\nThe red inverter is a **weak feedback inverter (keeper)** connected **from node B back to node A**. Together with `Inv1` it forms a **cross-coupled static latch** (two inverters in a loop):\n\n```\nA ──Inv1──► B\n▲           │\n└──(red)────┘\n```\n\nBecause the keeper is sized weak (small W/L), the transmission gate and `Inv1` can easily override it when they update the state. But when the left transmission gate turns OFF and node **A** becomes floating, the latch holds the logic level statically. \n\n**Why this matters**\n\nWithout the keeper, node **A** is purely dynamic: its charge leaks away through subthreshold and gate-tunneling currents. If the clock stops or runs too slowly, the stored value is corrupted. That is the **minimum clock frequency** limitation of dynamic logic.\n\nBy adding the cross-coupled pair, the storage becomes **static** – the state is held by the latch, not by a stored charge packet. Leakage can no longer destroy the value, so the clock can be stopped or run arbitrarily slowly.\n\nSo the answer you quoted is right: the red inverter is indeed a **keeper** that, together with `Inv1`, creates a static latch and thereby removes the leakage-induced minimum clock-frequency requirement. The only refinement is that it is specifically a *weak* inverter so that it does not fight the driving gates during evaluation.",
        "format": "markdown",
        "sha256": "19de7edb5098c2300af70feb37529aca9f6e4260d9b8f9d7304d33a56fd10bdb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper and places it in a cross-coupled feedback loop. It is actually an unclocked feedforward branch that bypasses part of the latch path: it can aid high-speed operation but can overpower the intended behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 20182,
        "total_tokens": 21972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19709,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 20182,
        "total_tokens": 21972,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19709,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that explanation.** The answer misinterprets both the connections and the purpose of the highlighted inverter.\n\n### What the red inverter actually does\nThe red inverter sits right at the **clock input (CK)**. Its job is simply to **generate the complementary clock $\\overline{\\mathrm{CK}}$** that drives the right-hand transmission gate.\n\n- **Input:** CK (from the left)\n- **Output:** $\\overline{\\mathrm{CK}}$, routed over to the transmission gate labeled $\\overline{\\mathrm{CK}}$\n\nIt is **not** connected in feedback with Inv1 to form a storage latch. It belongs to the **clock distribution path**, not to the data/storage loop.\n\n### Why the “keeper / cross-coupled latch” answer is wrong\n1. **Connection:** The inverter’s output is routed toward the clock-control terminal of the right transmission gate, not back to the input of Inv1. For a cross-coupled latch you would need the second inverter to bridge the output of Inv1 back to its input (node N1 ↔ node N2). That is not what the wiring shows.\n2. **Function:** A keeper in dynamic logic is usually a **weak feedback transistor** (or a weak inverter) tied directly across a single dynamic node to fight leakage. The red element is a full-sized inverter placed in the clock line; it is not sized or connected to act as a weak keeper for a storage node.\n3. **Effect on clock frequency:** The loop formed by Inv1 → (TG) → Inv2 → Inv3 → (feedback) is indeed a **dynamic, clocked loop** (essentially a toggle/shift stage). The nodes between the transmission gates and the inverters are capacitive and *do* suffer from leakage, so the circuit **does** have a minimum clock frequency (or maximum clock-stop time). The red inverter does **nothing** to fix that; it only provides the complementary clock phase.\n\n### Summary\n- **Actual role:** Clock inverter → produces $\\overline{\\mathrm{CK}}$ for the right transmission gate.\n- **The leakage/minimum-frequency issue is real** for the dynamic storage nodes in the loop, but it is **not solved** by this inverter. If one wanted to eliminate the minimum clock frequency, one would need weak keeper devices (or full static latches) at **each** dynamic storage node in the loop—not a clock inverter in the CK path.",
        "format": "markdown",
        "sha256": "b01c230cc5e3c9cb62debcefdb5eb492caf0064d3e5d9c8e309cbd49f5c9193b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper/cross-coupled-latch interpretation, but misidentifies the red inverter as a clock inverter. The actual red inverter is a feedforward branch that bypasses part of the latch path, improving high-speed operation but potentially corrupting division at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 21768,
        "total_tokens": 23558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 21768,
        "total_tokens": 23558,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nThis is a resistive‑feedback CMOS inverter LNA (M₁ NMOS + M₂ PMOS, feedback resistor R_F).  \nWith R_in fixed at 50 Ω the only free design knob is the pair (R_F , g_m1+g_m2). Both the transistor thermal‑noise term and the R_F thermal‑noise term are reduced by making **R_F as large as practically possible** (several kΩ) and biasing/sizing M₁ and M₂ so that\n\n\\[\ng_{m1}+g_{m2}\\;\\approx\\;\\frac{1}{R_{in}}-\\frac{1}{R_F}\\;\\approx\\;20\\;\\text{mS}.\n\\]\n\nIn the limit R_F→∞ the noise figure approaches its theoretical minimum\n\n\\[\nNF_{\\min}\\;\\approx\\;1+\\gamma\\;\\approx\\;1+\\frac{2}{3}\\;\\approx\\;2.2\\;\\text{dB},\n\\]\n\nwhile for any finite R_F the NF is larger. Hence the optimization procedure is: **maximize R_F, then set the total inverter transconductance to ≈20 mS (split arbitrarily between M₁ and M₂), and keep the total C_gs as small as the required g_m allows.**\n\n---\n\n### Detailed reasoning\n\n#### 1. Input‑impedance constraint\nWith the gate of M₁ tied to the gate of M₂ and R_F connecting the common drain node back to the input, the small‑signal input resistance is\n\n\\[\nR_{in}= \\frac{v_{in}}{i_{in}}\n      =\\frac{R_F\\bigl(G_o+1/R_F\\bigr)}{G_o+g_{m1}+g_{m2}}\n      \\;\\approx\\;\\frac{R_F}{1+(g_{m1}+g_{m2})R_F},\n\\]\n\nwhere \\(G_o\\approx 1/r_{o1}+1/r_{o2}\\) is usually negligible compared with \\(g_{m1}+g_{m2}\\).  \nSolving for the required transconductance sum:\n\n\\[\ng_{m1}+g_{m2}\\;=\\;\\frac{1}{R_{in}}-\\frac{1}{R_F}\n               \\;=\\;0.02\\;\\text{S}-\\frac{1}{R_F}.\n\\]\n\nThus **R_in = 50 Ω does not fix g_m alone**; it fixes the combination \\((g_{m1}+g_{m2},R_F)\\).\n\n#### 2. Noise‑figure expression\nThe dominant noise sources are:\n* Channel thermal noise of M₁ and M₂:  \n  \\(\\displaystyle \\overline{i_{n,M_i}^2}=4kT\\gamma g_{mi}\\)\n* Thermal noise of R_F:  \n  \\(\\displaystyle \\overline{v_{n,R_F}^2}=4kTR_F\\)\n\nReferring all noise to the input (source impedance R_s = R_in = 50 Ω) gives the noise factor\n\n\\[\nF \\;=\\;1+\\underbrace{\\frac{\\gamma}{(g_{m1}+g_{m2})R_{in}}}_{\\text{transistor term}}\n      +\\underbrace{\\frac{R_F R_{in}}{(R_F-R_{in})^2}}_{\\text{R_F term}} .\n\\]\n\nSubstituting \\((g_{m1}+g_{m2})R_{in}=1-R_{in}/R_F\\):\n\n\\[\nF(R_F)=1+\\frac{\\gamma\\,R_F}{R_F-R_{in}}+\\frac{R_F R_{in}}{(R_F-R_{in})^2}.\n\\]\n\nWith \\(\\gamma\\approx 2/3\\) and \\(R_{in}=50\\;\\Omega\\):\n\n| R_F | Transistor term | R_F term | Total NF (dB) |\n|-----|----------------|----------|---------------|\n| 100 Ω | 1.33 | 2.00 | ≈ 6.4 dB |\n| 500 Ω | 0.74 | 0.12 | ≈ 2.7 dB |\n| 1 kΩ | 0.70 | 0.055 | ≈ 2.45 dB |\n| →∞ | → 0.67 | → 0 | **≈ 2.2 dB** |\n\nThe derivative dF/dR_F is negative for all R_F>R_in; therefore **there is no finite local minimum—NF improves monotonically with R_F**.\n\n#### 3. What this means for the design\nBecause \\(g_{m1}+g_{m2}=0.02-1/R_F\\), a larger R_F also allows (requires) a larger total g_m, which further suppresses the transistor noise contribution. The practical design flow is therefore:\n\n1. **Choose R_F as large as the gain/bandwidth/headroom allows** (typically 1 kΩ–5 kΩ, sometimes up to 10 kΩ in CMOS).\n2. **Set the bias current and W/L of M₁ and M₂** so that  \n   \\(g_{m1}+g_{m2}\\approx 20\\;\\text{mS}\\,(1+50/R_F)^{-1}\\).  \n   For R_F≈2 kΩ this gives g_m,total≈19 mS.\n3. **Split g_m between M₁ and M₂** according to DC headroom and linearity needs; the thermal‑noise contribution depends only on the sum.\n4. **Keep C_gs,tot = C_gs1+C_gs2 minimal** (choose the smallest W that delivers the required g_m) because gate‑induced noise \\(\\propto \\omega^2 C_{gs}^2/g_m\\) is the next limiting factor at high frequency.\n5. **Make C₁ large enough** so that its impedance is ≪50 Ω at the operating frequency.\n\nIn summary: **fix R_in=50 Ω by the relation above, then push R_F upward and scale the inverter transconductance to match—this drives NF down toward the 2.2 dB floor.**",
        "format": "markdown",
        "sha256": "73456041bdfcd658f2093d2658da3e54cadb61f5ed6150060adeae272661e623"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer writes an expression containing finite output resistance, but then neglects it and concludes that increasing RF drives gm to 1/Rin and NF only to 1+gamma. It misses the key result: with finite ro, RF can be adjusted to hold Rin at 50 Ω while gm exceeds 1/Rs, allowing NF below 1+gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 42018,
        "total_tokens": 43723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 42018,
        "total_tokens": 43723,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nKeep the difference of the two transconductances fixed at  \n\\[\ng_{m1}-g_{m2}\\approx \\frac{1}{R_{in}}=20\\;\\text{mS}\n\\]  \nand then **minimize the sum** \\(g_{m1}+g_{m2}\\). That is done by making **\\(M_2\\) as small as possible** (\\(g_{m2}\\to 0\\)) and sizing **\\(M_1\\) for \\(g_{m1}\\approx 20\\) mS**. At the same time make the feedback resistor **\\(R_F\\) as large as practical** (\\(R_F\\gg 50\\;\\Omega\\), typically 0.5–5 kΩ). This gives the lowest possible noise figure \\(F_{\\min}\\approx 1+\\gamma\\) (with \\(\\gamma\\approx 2/3\\) for long‑channel devices).\n\n---\n\n### 1.  What fixes \\(R_{in}=50\\;\\Omega\\)?\n\nWrite the small‑signal KCL at the input node (A) and at the output node (B):\n\n* Gate currents are zero.\n* \\(M_1\\) (NMOS): gate & drain at B? **No** – in this inverter‑feedback LNA both gates are tied to the input node A, \\(M_1\\) has source ground and drain at B, while \\(M_2\\) (PMOS) has source at \\(V_{DD}\\) (AC ground) and drain at B.\n* \\(R_F\\) connects A ↔ B.\n\nWith \\(v_{in}=0\\) and applying a test voltage \\(v_a\\) at A, the current entering the port is\n\\[\ni_{in}=\\frac{v_a-v_b}{R_F}.\n\\]\nThe KCL at B gives\n\\[\nv_a\\bigl(g_{m1}-g_{m2}-\\tfrac{1}{R_F}\\bigr)+v_b\\Bigl(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}+\\frac{1}{R_F}\\Bigr)=0 .\n\\]\n\nSolving for \\(v_b/v_a\\) and inserting into \\(R_{in}=v_a/i_{in}\\) yields\n\\[\n\\boxed{R_{in}= \\frac{1+R_F/R_{o}}{1/R_{o}+g_{m1}-g_{m2}}},\\qquad \n\\frac{1}{R_o}=\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}} .\n\\]\n\nBecause in any practical CMOS LNA \\(r_{o1},r_{o2}\\gg R_{in}\\) (\\(R_o\\gg 50\\;\\Omega\\)), this reduces to the well‑known result\n\\[\n\\boxed{R_{in}\\approx\\frac{1}{g_{m1}-g_{m2}} } .\n\\]\n\nHence the **hard constraint** is\n\\[\n\\boxed{g_{m1}-g_{m2}= \\frac{1}{50\\;\\Omega}=20\\;\\text{mS}} .\n\\]\n\n> **Consequence:** Once you pick one transistor size, the other is fixed by the 20 mS difference.\n\n---\n\n### 2.  Where does the noise come from?\n\nThe three dominant noise sources are:\n\n| Source | Spectral density (per Hz) | Location |\n|--------|---------------------------|----------|\n| \\(R_F\\) | \\(4kT R_F\\) | Between A and B |\n| \\(M_1\\) | \\(4kT\\gamma g_{m1}\\) | Between B and ground |\n| \\(M_2\\) | \\(4kT\\gamma g_{m2}\\) | Between B and ground |\n\nBecause the loop feeds the output noise back to the input, the **input‑referred** noise voltage is divided by the loop gain \\((1+|A_v|)\\). After carrying out the feedback analysis with \\(R_s=R_{in}=R\\) one gets the noise factor\n\n\\[\nF = 1+\\frac{R}{(R_F-R)^2}\\Bigl[4R_F+\\gamma(g_{m1}+g_{m2})(R+R_F)^2\\Bigr].\n\\]\n\n---\n\n### 3.  The optimization (minimize \\(F\\) subject to \\(g_{m1}-g_{m2}=g_0\\))\n\nWrite \\(g_{m1}=g_0+g_{m2}\\) with \\(g_0=20\\) mS. Then\n\n\\[\nF-1 \\propto 4R_F + \\gamma\\bigl(g_0+2g_{m2}\\bigr)(R+R_F)^2 .\n\\]\n\n* **With respect to \\(g_{m2}\\):** The coefficient of \\(g_{m2}\\) is strictly positive.  \n  \\(\\Rightarrow\\) **Set \\(g_{m2}\\) as small as possible** (\\(g_{m2}\\to 0\\)).  \n  Then \\(g_{m1}=g_0=20\\) mS and the transistor noise contribution is minimized.\n\n* **With respect to \\(R_F\\):** For \\(g_{m2}=0\\) the expression becomes\n  \\[\n  F-1 \\propto \\frac{4R_F+\\gamma g_0(R+R_F)^2}{(R_F-R)^2}.\n  \\]\n  This is a monotonically decreasing function for \\(R_F>R\\); its global minimum is reached at\n  \\[\n  \\boxed{R_F\\to\\infty}.\n  \\]\n  Physically this means: **make \\(R_F\\) very large** (several kΩ). Its own thermal noise is then suppressed by the large loop gain, while the 50 Ω match is still maintained by the transistor pair (\\(g_{m1}-g_{m2}=20\\) mS).\n\n> **Practical choice:** \\(R_F = 1\\!-\\!5\\;\\text{k}\\Omega\\) (large enough for low noise, but still providing the DC bias point for the inverter).\n\n---\n\n### 4.  Design recipe\n\n1. **Fix the match:** Choose \\(g_{m1}-g_{m2}=20\\) mS.\n2. **Minimize transistor noise:** Size \\(M_2\\) at the **minimum allowed W/L** (\\(g_{m2}\\approx 0\\)). Size \\(M_1\\) for\n   \\[\n   g_{m1}\\approx 20\\;\\text{mS}\\;\\;\\Rightarrow\\;\\;\n   \\frac{W_1}{L_1}\\approx \\frac{20\\;\\text{mS}}{\\mu_n C_{ox}(V_{GS1}-V_{TH1})}.\n   \\]\n3. **Choose \\(R_F\\):** Use the largest resistor that still gives the correct DC bias (typically \\(R_F\\gg 50\\;\\Omega\\), e.g. 1 kΩ or more).\n4. **Check bias:** The inverter self‑biases near \\(V_{DD}/2\\) through \\(R_F\\).\n\nWith these choices the circuit achieves its theoretical minimum noise figure\n\\[\n\\boxed{F_{\\min}\\approx 1+\\gamma \\;\\;(\\approx 1.67\\;\\text{for }\\gamma=2/3)} .\n\\]\n\n---\n\n### 5.  Summary in one sentence\n\n> **Keep \\(g_{m1}-g_{m2}=20\\) mS (so \\(R_{in}=50\\;\\Omega\\)), make \\(M_2\\) negligible (\\(g_{m2}\\to0\\)) and \\(M_1\\) provide the full 20 mS, and use the largest practical \\(R_F\\); this minimizes both the transistor channel noise and the feedback‑resistor noise contribution.**",
        "format": "markdown",
        "sha256": "37db5450f1103bda705b1626f0709038d3e8660deaafeda9dd418f42136019fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer assumes the match fixes the effective transconductance at 1/50 Ω and concludes the best NF is 1+γ. It misses the key finite-output-resistance effect: gm can exceed 1/Rs while RF is adjusted to preserve Rin, allowing NF below 1+γ.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 36838,
        "total_tokens": 38543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 36838,
        "total_tokens": 38543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have a **common-source amplifier with resistive feedback** (R_F from the drain node B back to the gate node A) and an active load M₂ (connected between V_DD and node B). The input is AC-coupled through C₁, and the input resistance is fixed at the system impedance R_in = R_S = 50 Ω.\n\nTo minimize the Noise Figure (NF) while keeping R_in = 50 Ω, we must understand the two coupled constraints: **the feedback sets R_in**, and **the loop gain sets how much noise R_F and the transistors contribute**.\n\n---\n\n### 1. Input-Impedance Constraint\nWith source grounded, the small-signal input resistance is set by the feedback factor and the voltage gain |A_v| ≈ g_m1·R_D (where R_D ≈ r_o1 || r_o2 || 1/g_m2 is the load impedance at node B):\n\n\\[\nR_{in} \\approx \\frac{R_F}{1+|A_v|} = \\frac{R_F}{1+g_{m1}R_D} = 50\\;\\Omega\n\\]\n\nTherefore R_F is **not free**; it must track the loop gain:\n\n\\[\n\\boxed{R_F = 50\\bigl(1+g_{m1}R_D\\bigr)}\n\\]\n\nIf we increase g_m1 or R_D, R_F must be increased proportionally to keep R_in at 50 Ω.\n\n---\n\n### 2. Noise Sources & Noise-Figure Expression\nThe main noise contributors (referred to the input) are:\n\n| Source | Input-referred noise contribution to F |\n|--------|----------------------------------------|\n| Source resistor R_S = 50 Ω | 1 (reference) |\n| Feedback resistor R_F | ≈ 1/(1+|A_v|) = 50/R_F |\n| Channel noise of M₁ | ≈ γ₁ / (g_m1 R_S) = γ₁ / (g_m1·50) |\n| Channel noise of M₂ | ≈ γ₂ g_m2 / (g_m1² R_S) |\n\nSo the total noise factor is approximately\n\n\\[\nF \\approx 1 + \\underbrace{\\frac{1}{1+g_{m1}R_D}}_{\\text{R_F term}} + \\underbrace{\\frac{\\gamma_1}{g_{m1}R_S}}_{\\text{M}_1\\text{ term}} + \\underbrace{\\frac{\\gamma_2 g_{m2}}{g_{m1}^2 R_S}}_{\\text{M}_2\\text{ term}}\n\\]\n\n---\n\n### 3. Optimization Strategy\nBecause R_in is locked at 50 Ω, **R_F is automatically scaled with the loop gain**. To drive F → 1 (NF → 0 dB) we must make the two transistor-related terms and the R_F term as small as possible:\n\n#### A. Maximize the loop gain |A_v| = g_m1 R_D\n- This **directly suppresses the R_F noise contribution** (it falls as 1/|A_v|).\n- It also reduces the M₂ contribution (which scales like 1/|A_v|).\n\n**How:** Use a **large W/L for M₁** (raises g_m1) and make **R_D large** (use a long-channel or small-W/L M₂ so that r_o2 is large and g_m2 is small; if M₂ is diode-connected, |A_v| ≈ g_m1/g_m2, so make (W/L)₁ ≫ (W/L)₂).\n\n#### B. Maximize g_m1\n- The M₁ term is ∝ 1/g_m1. \n- **How:** Increase (W/L)₁ and/or bias current I_D (within headroom/power limits).\n\n#### C. Minimize g_m2\n- The M₂ term is ∝ g_m2/g_m1².\n- **How:** Keep (W/L)₂ small and I_D moderate.\n\n#### D. Choose the bias current I_D (if R_D ≈ 1/λI_D)\nIf R_D is set mainly by the output resistances r_o ∝ 1/I_D, then |A_v| ≈ g_m1/((λ₁+λ₂)I_D). Substituting g_m1 ∝ √I_D gives an optimal current that balances the 1/g_m1 and 1/|A_v| terms:\n\n\\[\nI_{D,opt} \\approx \\frac{\\gamma_1}{R_S(\\lambda_1+\\lambda_2)} \\approx \\frac{\\gamma_1}{50(\\lambda_1+\\lambda_2)}\n\\]\n\nIn practice, however, the dominant rule is: **make g_m1 R_D as large as the supply/headroom allows**, then set R_F accordingly.\n\n---\n\n### 4. Practical Design Steps\n1. **Select M₁:** Choose the largest practical W/L (and appropriate L) to maximize g_m1.\n2. **Select M₂ / Load:** Use the smallest practical (W/L)₂ (or a cascode/current-source load with high r_o) to maximize R_D and minimize g_m2.\n3. **Bias:** Choose I_D near the optimal value above (or as high as power allows) to push g_m1 up.\n4. **Calculate |A_v|** = g_m1 R_D.\n5. **Set R_F** = 50(1 + |A_v|) Ω to force R_in = 50 Ω.\n6. **Choose C₁** large enough so that 1/ωC₁ ≪ 50 Ω at the operating frequency.\n\n---\n\n### Summary\nBecause R_in is fixed, **R_F is a slave to the loop gain**. The only way to improve NF is to **increase the loop gain |A_v| = g_m1R_D and increase g_m1 itself**, then let R_F grow to 50(1+|A_v|). This simultaneously:\n- reduces the thermal-noise contribution of R_F,\n- reduces the channel-noise contribution of M₁,\n- and suppresses the noise contribution of M₂.\n\nIn short: **Make M₁ very wide (high g_m1), make the load impedance R_D very large (small g_m2 / long channel), compute the resulting |A_v|, and set R_F = 50(1+|A_v|).**",
        "format": "markdown",
        "sha256": "9c624334e93bf51eaf3d407b0eaf31341a1fdf0eab1a2a7bd77d8e0b5feb350d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The broad optimization direction is right: raise gm and adjust RF upward to preserve the match, reducing noise. However, the matching formula omits the finite-output-resistance term in the numerator, so it does not ensure Rin is exactly 50 Ω; it also mischaracterizes the inverter pair and uses an unreliable noise model.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 28130,
        "total_tokens": 29835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26736,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 28130,
        "total_tokens": 29835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26736,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Small–signal model**\n\nTurn off the DC sources (\\(V_{DD}\\to 0\\), \\(I_{SS}\\) open, \\(V_b\\) AC ground).  \nThe transistors are\n\n* \\(M_1\\): NMOS, gate \\(v_p\\), source ground, drain \\(v_x\\)  \n  \\(\\Rightarrow i_{d1}=g_{m1}v_p\\), \\(r_{o1}\\) between \\(v_x\\) and ground\n* \\(M_2\\): PMOS, gate/drain at \\(v_x\\), source at \\(v_y\\) (diode–connected)  \n  \\(\\Rightarrow v_{sg2}=v_y-v_x\\), current source \\(g_{m2}(v_y-v_x)\\) (S→D), \\(r_{o2}\\) between \\(v_x,v_y\\)\n* \\(M_3\\): PMOS, gate AC ground, source \\(v_y\\), drain \\(v_{out}\\)  \n  \\(\\Rightarrow v_{sg3}=v_y\\), current source \\(g_{m3}v_y\\) (S→D), \\(r_{o3}\\) between \\(v_{out},v_y\\)\n\nThe resistive loads are \\(R_{D1}\\) (\\(V_{DD}\\to v_x\\)), \\(R_{D2}\\) (\\(v_{out}\\to\\)gnd) and the feedback resistor \\(R_F\\) (\\(v_{out}\\to v_p\\)).  \nAt the left port the photodiode is modelled by \\(I_{in}\\parallel C_{in}\\) in parallel with the series resistor \\(R_{in}\\) that connects to node \\(P\\).\n\nWrite KCL at the three internal nodes (\\(v_p,v_x,v_y,v_{out}\\)):\n\n**Node \\(X\\)**\n\\[\nv_x\\!\\left(\\frac1{R_{D1}}+\\frac1{r_{o1}}+\\frac1{r_{o2}}+g_{m2}\\right)\n-v_y\\!\\left(\\frac1{r_{o2}}+g_{m2}\\right)=-g_{m1}v_p\n\\tag{1}\n\\]\n\n**Node \\(Y\\)** (no AC path through \\(I_{SS}\\))\n\\[\n-v_x\\!\\left(\\frac1{r_{o2}}+g_{m2}\\right)\n+v_y\\!\\left(\\frac1{r_{o2}}+\\frac1{r_{o3}}+g_{m2}+g_{m3}\\right)\n-v_{out}\\frac1{r_{o3}}=0\n\\tag{2}\n\\]\n\n**Node \\(V_{out}\\)**\n\\[\nv_{out}\\!\\left(\\frac1{R_{D2}}+\\frac1{R_F}+\\frac1{r_{o3}}\\right)\n-\\frac{v_p}{R_F}\n-v_y\\!\\left(\\frac1{r_{o3}}+g_{m3}\\right)=0\n\\tag{3}\n\\]\n\n**Node \\(P\\)** (gate current = 0)\n\\[\n\\frac{v_p-v_i}{R_{in}}+\\frac{v_p-v_{out}}{R_F}=0\n\\;\\;\\Longrightarrow\\;\\;\nv_p=\\frac{R_F v_i+R_{in}v_{out}}{R_{in}+R_F}\n\\tag{4}\n\\]\n\n---\n\n### 1. Open–loop voltage gain \\(A_v=v_{out}/v_p\\big|_{R_F=\\infty}\\)\n\nSolving (1)–(2) for \\(v_x,v_y\\) and substituting in (3) with \\(1/R_F=0\\) gives\n\n\\[\nA_v=\n-\\,\n\\frac{g_{m1}\\,R_{D2}^{\\;*}}\n{1+\\dfrac{1}{R_{D1}^{\\;*}}\\!\\left(\\dfrac1{g_{m2}}+\\dfrac1{g_{m3}}\\right)}\n\\]\n\nwhere  \n\\(R_{D1}^{*}=R_{D1}\\|r_{o1}\\) and \\(R_{D2}^{*}=R_{D2}\\|r_{o3}\\).\n\nIf the output resistances are large (\\(r_{o}\\gg R_D\\)) this simplifies to\n\n\\[\n\\boxed{%\nA_v\\approx\n-\\frac{g_{m1}R_{D2}}\n{1+\\dfrac{1}{R_{D1}}\\!\\left(\\dfrac1{g_{m2}}+\\dfrac1{g_{m3}}\\right)}\n}\n\\tag{5}\n\\]\n\nThe loop is inverting (\\(A_v<0\\)) and for typical bias (\\(|A_v|\\gg 1\\)).\n\nThe open–loop output impedance is\n\n\\[\nZ_{out}\\approx R_{D2}\\|r_{o3}=R_{D2}^{*}.\n\\tag{6}\n\\]\n\n---\n\n### 2. Input impedance seen at node \\(P\\)\n\nBecause \\(R_F\\) feeds the output back to the input, the impedance looking into node \\(P\\) is\n\n\\[\nZ_P=\\frac{v_p}{i_{in}}=\\frac{R_F+Z_{out}}{1-A_v}\n=\\frac{R_F+R_{D2}^{*}}\n{1+\\displaystyle\\frac{g_{m1}R_{D2}^{*}}\n{1+\\frac{1}{R_{D1}^{*}}\\!\\left(\\frac1{g_{m2}}+\\frac1{g_{m3}}\\right)} } .\n\\tag{7}\n\\]\n\nFor \\(|A_v|\\gg 1\\) this reduces to the well–known “Miller–reduced” result\n\n\\[\n\\boxed{%\nZ_P\\approx\n\\frac{1}{g_{m1}}\n\\left[1+\\frac{1}{R_{D1}^{*}}\\!\\left(\\frac1{g_{m2}}+\\frac1{g_{m3}}\\right)\\right]\n\\left(1+\\frac{R_{D2}^{*}}{R_F}\\right)\n\\;\\approx\\;\\frac{1}{g_{m1}}\n}\n\\tag{8}\n\\]\n\n---\n\n### 3. Total input impedance of the circuit\n\nThe left port contains \\(C_{in}\\) to ground and the series resistor \\(R_{in}\\) that connects to node \\(P\\). Replacing the current source \\(I_{in}\\) by a test source gives\n\n\\[\n\\boxed{%\nZ_{in}(s)=\n\\Bigl[\\,R_{in}+Z_P\\,\\Bigr]\\;\\Big\\|\\;\\frac{1}{sC_{in}}\n=\n\\frac{R_{in}+Z_P}{1+sC_{in}\\bigl(R_{in}+Z_P\\bigr)}\n}\n\\tag{9}\n\\]\n\nwith \\(Z_P\\) given by (7) (or (8) for large loop gain).\n\n---\n\n### Final result (DC / low–frequency, \\(|A_v|\\gg1\\))\n\n\\[\n\\boxed{%\nR_{in,\\,\\text{circuit}}\\;\\approx\\;R_{in}+\\frac{1}{g_{m1}}\n\\left[1+\\frac{1}{R_{D1}}\\left(\\frac{1}{g_{m2}}+\\frac{1}{g_{m3}}\\right)\\right]\n}\n\\]\n\nand the full frequency–dependent input impedance is (9). The feedback resistor \\(R_F\\) and the second–stage transistors \\(M_2,M_3\\) reduce the input impedance from the open–circuit value (\\(\\sim R_{in}\\)) down to roughly \\(1/g_{m1}\\).",
        "format": "markdown",
        "sha256": "444185a53cb74d4bf6d5bc9d2a3cb2588e8fda92b07e9a5d4fd79ebdeea961a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The general feedback relation \\((R_F+Z_{out})/(1-A_v)\\) captures the Miller input-impedance mechanism and includes the output-side resistance. However, the claimed open-loop gain does not match the circuit’s required \\(A_0=\\tfrac12 g_{m1}g_{m2,3}R_{D1}R_{D2}\\), and the resulting approximation and added input-network terms do not give the required impedance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 48849,
        "total_tokens": 49277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 48849,
        "total_tokens": 49277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Small‑signal model**\n\nSet all DC supplies and bias sources to AC ground:  \n\\(V_{DD}\\to 0,\\;V_b\\to 0\\) and the current source \\(I_{SS}\\) becomes an open circuit.\n\nReplace the three MOSFETs by their low‑frequency small‑signal equivalents  \n\n\\[\nM_k:\\; g_{mk},\\; r_{ok}\\;(k=1,2,3)\n\\]\n\nThe circuit nodes are  \n\n* \\(S\\) (the input node \\(P\\), voltage \\(v_{in}\\))  \n* \\(X\\) (drain of \\(M_1\\) / source of \\(M_2\\), voltage \\(v_x\\))  \n* \\(Y\\) (drain of \\(M_2\\) / drain of \\(M_3\\), voltage \\(v_y\\))  \n* \\(O\\) (the output node \\(V_{out}\\), voltage \\(v_o\\))\n\nThe resistive branches are  \n\n\\[\nR_{D1}:X\\to 0,\\qquad R_{D2}:O\\to 0,\\qquad R_F:S\\to O\n\\]\n\nand at the input port\n\n\\[\nR_{in}\\parallel C_{in}\\;:\\;S\\to 0 .\n\\]\n\nThe transistor connections are  \n\n* \\(M_1\\): gate ground, source \\(S\\), drain \\(X\\)  \n* \\(M_2\\): gate ground, source \\(X\\), drain \\(Y\\)  \n* \\(M_3\\): gate ground, source \\(O\\), drain \\(Y\\)\n\n---\n\n### 1.  KCL equations\n\nUsing \\(g_{ok}=1/r_{ok}\\) and \\(G_{D1}=1/R_{D1},\\;G_{D2}=1/R_{D2},\\;G_F=1/R_F\\):\n\n**Node \\(X\\)**  \n\n\\[\nv_x\\bigl(G_{D1}+g_{o1}+g_{m2}+g_{o2}\\bigr)-v_y g_{o2}\n= v_{in}\\bigl(g_{m1}+g_{o1}\\bigr) \\tag{1}\n\\]\n\n**Node \\(Y\\)**  \n\n\\[\n-v_x\\bigl(g_{m2}+g_{o2}\\bigr)+v_y\\bigl(g_{o2}+g_{o3}\\bigr)\n-v_o\\bigl(g_{m3}+g_{o3}\\bigr)=0 \\tag{2}\n\\]\n\n**Node \\(O\\)**  \n\n\\[\n-v_y g_{o3}+v_o\\bigl(G_{D2}+G_F+g_{m3}+g_{o3}\\bigr)\n= v_{in}G_F \\tag{3}\n\\]\n\nWrite (1)–(3) in matrix form \\(\\mathbf{A}\\mathbf{v}= \\mathbf{b}\\,v_{in}\\) with\n\\(\\mathbf{v}=[v_x\\;v_y\\;v_o]^T\\):\n\n\\[\n\\begin{bmatrix}\nA_{11}&-g_{o2}&0\\\\[2pt]\n-(g_{m2}+g_{o2})&g_{o2}+g_{o3}&-(g_{m3}+g_{o3})\\\\[2pt]\n0&-g_{o3}&A_{33}\n\\end{bmatrix}\n\\begin{bmatrix}v_x\\\\v_y\\\\v_o\\end{bmatrix}\n=\nv_{in}\n\\begin{bmatrix}\ng_{m1}+g_{o1}\\\\0\\\\G_F\n\\end{bmatrix}\n\\]\n\nwhere  \n\n\\[\nA_{11}=G_{D1}+g_{o1}+g_{m2}+g_{o2},\\qquad\nA_{33}=G_{D2}+G_F+g_{m3}+g_{o3}.\n\\]\n\nDenote \\(\\Delta=\\det\\mathbf{A}\\).  Solving for the two gains that enter the\nsource KCL gives\n\n\\[\n\\boxed{\\frac{v_x}{v_{in}}=\n\\frac{B_1(A_{22}A_{33}-A_{23}A_{32})+A_{12}A_{23}B_3}{\\Delta}}\n\\]\n\n\\[\n\\boxed{\\frac{v_o}{v_{in}}=\n\\frac{B_3(A_{11}A_{22}-A_{12}A_{21})+B_1A_{21}A_{32}}{\\Delta}}\n\\]\n\nwith \\(B_1=g_{m1}+g_{o1}\\) and \\(B_3=G_F\\).\n\n---\n\n### 2.  KCL at the input node \\(S\\)\n\nThe current entering the source is\n\n\\[\ni_{in}= \\underbrace{v_{in}\\Bigl(g_{m1}+g_{o1}+\\frac1{R_F}\\Bigr)\n-\\frac{v_x}{r_{o1}}-\\frac{v_o}{R_F}}_{\\displaystyle i_{S}+i_{R_F}}\n+\\underbrace{\\frac{v_{in}}{R_{in}}+j\\omega C_{in}v_{in}}_{\\displaystyle i_{R_{in}}+i_{C_{in}}}.\n\\]\n\nHence the impedance **looking into the transistor network** (the\n“active” part) is\n\n\\[\n\\boxed{\nZ_{\\mathrm{amp}}=\n\\left[\ng_{m1}+\\frac1{r_{o1}}+\\frac1{R_F}\n-\\frac1{r_{o1}}\\frac{v_x}{v_{in}}\n-\\frac1{R_F}\\frac{v_o}{v_{in}}\n\\right]^{-1}}\n\\]\n\nwith \\(v_x/v_{in}\\) and \\(v_o/v_{in}\\) given above.\n\n---\n\n### 3.  Total input impedance\n\nThe bias resistor and coupling capacitor are in parallel with the active\ninput impedance, so\n\n\\[\n\\boxed{\nZ_{\\mathrm{in}}(j\\omega)=\nR_{in}\\;\\Big\\|\\;\\frac{1}{j\\omega C_{in}}\\;\\Big\\|\\;Z_{\\mathrm{amp}} }\n\\]\n\nor, written explicitly,\n\n\\[\n\\boxed{\nZ_{\\mathrm{in}}(j\\omega)=\n\\left[\n\\frac1{R_{in}}+j\\omega C_{in}\n+\\Bigl(g_{m1}+\\frac1{r_{o1}}+\\frac1{R_F}\\Bigr)\n-\\frac1{r_{o1}}\\frac{v_x}{v_{in}}\n-\\frac1{R_F}\\frac{v_o}{v_{in}}\n\\right]^{-1}} .\n\\]\n\n---\n\n### 4.  Useful approximations\n\nIf the output resistances are very large (\\(r_{ok}\\to\\infty\\Rightarrow g_{ok}\\to0\\))\nand the load resistances are large (\\(R_{D1},R_{D2}\\gg 1/g_{mk}\\)), then\n\n\\[\n\\frac{v_x}{v_{in}}\\approx -\\frac{g_{m1}}{g_{m2}},\\qquad\n\\frac{v_o}{v_{in}}\\approx \\frac{g_{m1}}{g_{m3}} .\n\\]\n\nSubstituting these into \\(Z_{\\mathrm{amp}}\\) gives the compact approximate\nresult\n\n\\[\n\\boxed{\nZ_{\\mathrm{amp}}\\approx\n\\frac{1}{g_{m1}\\Bigl[1+\\dfrac{1}{g_{m3}R_F}\\Bigr]}\n\\;\\approx\\;\\frac1{g_{m1}}\\quad (g_{m3}R_F\\gg1) } .\n\\]\n\nThus, for the usual case \\(g_{m3}R_F\\gg1\\),\n\n\\[\n\\boxed{\nZ_{\\mathrm{in}}(j\\omega)\\approx\nR_{in}\\;\\Big\\|\\;\\frac{1}{j\\omega C_{in}}\\;\\Big\\|\\;\\frac{1}{g_{m1}} } .\n\\]\n\nThis is the required input impedance of the circuit.  (If only the\ntransistor contribution is asked for, drop the \\(R_{in}\\) and \\(C_{in}\\)\nterms.)",
        "format": "markdown",
        "sha256": "e95b81280d0218501737bec3d50c50fc3b99a3c417cd06e608b90fb9034d4065"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes the feedback resistor and uses small-signal KCL, but its assumed topology and final 1/gm1 approximation miss the central Miller result, Rin = (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 53780,
        "total_tokens": 54208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51986,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 53780,
        "total_tokens": 54208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 51986,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Small‑signal model**\n\nLabel the nodes: gate of \\(M_1\\) is \\(P\\) (\\(v_{in}\\)), drain of \\(M_1\\) is \\(X\\) (\\(v_x\\)), the common node of \\(M_2\\) and \\(M_3\\) is \\(Y\\) (\\(v_y\\)), the source of \\(M_1\\) is \\(S_1\\) (\\(v_s\\)), and the output is \\(V_{out}\\) (\\(v_{out}\\)).  \nThe bias source \\(V_{DD}\\) and the gate bias \\(V_b\\) are AC grounds. The current source \\(I_{SS}\\) is an open circuit for small signals.\n\nThe transistor small‑signal parameters are  \n\\(g_{m1},g_{m2},g_{m3}\\) and (if channel‑length modulation is included) \\(r_{o1},r_{o2},r_{o3}\\).\n\nThe feedback resistor \\(R_F\\) connects \\(v_{out}\\) to \\(v_s\\); \\(R_{D1}\\) loads node \\(X\\); \\(R_{D2}\\) loads \\(v_{out}\\).\n\nThe KCL equations are  \n\n\\[\n\\begin{aligned}\n\\frac{v_x}{R_{D1}}+g_{m1}(v_{in}-v_s)+\\frac{v_x-v_s}{r_{o1}} &=0 \\\\[4pt]\n\\frac{v_s-v_{out}}{R_F}-g_{m1}(v_{in}-v_s)-\\frac{v_x-v_s}{r_{o1}} &=0 \\\\[4pt]\ng_{m2}v_x+\\Bigl(g_{m3}+\\frac1{r_{o2}}+\\frac1{r_{o3}}\\Bigr)v_y-\\frac{v_{out}}{r_{o3}} &=0 \\\\[4pt]\n\\Bigl(g_{m3}+\\frac1{r_{o3}}\\Bigr)v_y+\\Bigl(\\frac1{R_{D2}}+\\frac1{R_F}-\\frac1{r_{o3}}\\Bigr)v_{out}-\\frac{v_s}{R_F}&=0\n\\end{aligned}\n\\]\n\n---\n\n### Input impedance\n\nThe input port is on the left: a current source \\(I_{in}\\) is applied at the node that is connected to ground through \\(C_{in}\\) and through \\(R_{in}\\) to the gate \\(P\\) of \\(M_1\\).\n\nFor a MOSFET the gate current is zero (\\(i_g\\approx 0\\)). Consequently **no signal current flows into the transistor stage**; the only paths from the input node to ground are through \\(R_{in}\\) and \\(C_{in}\\). The feedback network (\\(R_F,M_2,M_3\\)) affects the voltage gain and the source voltage \\(v_s\\), but it does **not** draw current from the gate.\n\nHence, applying a test voltage \\(V_{in}\\) at the input node gives\n\n\\[\nI_{in}= \\frac{V_{in}}{R_{in}} + j\\omega C_{in}V_{in}\n\\]\n\nso that\n\n\\[\n\\boxed{Z_{in}(j\\omega)=\\frac{V_{in}}{I_{in}}\n      = R_{in}\\;\\Big\\|\\;\\frac{1}{j\\omega C_{in}}\n      = \\frac{R_{in}}{1+j\\omega R_{in}C_{in}} }\n\\]\n\nAt DC (\\(\\omega\\to 0\\)) this reduces to \\(Z_{in}=R_{in}\\); if \\(R_{in}\\) is placed in series with the gate it carries no current and can be ignored, leaving \\(Z_{in}\\approx 1/j\\omega C_{in}\\).\n\n*(If one includes the intrinsic gate–source capacitance \\(C_{gs}\\) of \\(M_1\\), there is an additional Miller term \\(C_{gs}[1-v_s/v_{in}]\\), but with the devices shown in the figure the dominant input impedance is that of the parallel \\(R_{in}C_{in}\\) network.)*",
        "format": "markdown",
        "sha256": "5c409e5975485af66f2d120dce5c5e7930ad1e434fbf971e9e7b780030ae1dc0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the input topology and concludes the gate draws no signal current, so the feedback resistor does not affect input impedance. It misses the required Miller result, Rin = (RF + RD2)/(1 + A0), and instead analyzes an unrelated Rin‖Cin network.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 36348,
        "total_tokens": 36776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 36348,
        "total_tokens": 36776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35433,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO phase-noise contribution from the LDO thermal noise, follow these steps:\n\n### 1. Supply-pushing coefficient\nThe LDO noise appears on $V_{\\mathrm{out}}$ and modulates the oscillation frequency through the supply-pushing (or “pushing”) gain of the VCO:\n$$K_{VDD}=\\frac{\\partial f_{\\mathrm{osc}}}{\\partial V_{DD}}\\quad[\\mathrm{Hz/V}]$$\nThis is obtained by simulation or measurement (it captures how $C_{gd},C_{ds}$ and the transistor bias point change with $V_{\\mathrm{out}}$).\n\n### 2. Voltage-noise PSD at the tank\nThe LDO intrinsic thermal noise has (single-sided) power spectral density $S_{th}(f)$ in $\\mathrm{V^2/Hz}$. Because the inductors $L_1$ are DC shorts and have negligible impedance at offset frequencies $f\\ll f_0$, this noise reaches both sides of the differential tank essentially unattenuated:\n$$S_V(f)=S_{th}(f)$$\n\n### 3. Frequency-modulation PSD\nThe supply noise creates an instantaneous frequency deviation\n$$\\Delta f(t)=K_{VDD}\\,v_n(t)$$\nso the PSD of the frequency fluctuation is\n$$S_{\\Delta f}(f)=K_{VDD}^2\\,S_{th}(f)\\quad[\\mathrm{Hz^2/Hz}]$$\n\n### 4. FM → PM conversion\nThe excess phase is the integral of $2\\pi\\Delta f$:\n$$\\phi(t)=2\\pi\\int \\Delta f(\\tau)\\,d\\tau$$\nIn the frequency domain the transfer function from $\\Delta f$ to $\\phi$ is $|H(f)|=1/f$ (with the $2\\pi$ normalization cancelling the radian-to-cycle conversion). For a real (single-sided) spectrum the single-sideband phase-noise density is\n$$L(f)=\\frac{1}{2}\\,S_{\\phi}(f)=\\frac{K_{VDD}^2}{2f^2}\\,S_{th}(f)$$\nwith units $\\mathrm{rad^2/Hz}$.\n\n### 5. Final formula (linear and dB)\n$$\\boxed{\\mathcal{L}(f)=\\frac{K_{VDD}^2}{2f^2}\\,S_{th}(f)}$$\n\nIn dBc/Hz:\n$$\\boxed{\\mathcal{L}(f)\\;[\\mathrm{dBc/Hz}]=20\\log_{10}|K_{VDD}|+10\\log_{10}S_{th}(f)-20\\log_{10}f-3\\;\\mathrm{dB}}$$\n\n**Key points:**\n- The slope is $-20$ dB/decade ($1/f^2$), contributing to the VCO’s $1/f^2$ phase-noise region.\n- $K_{VDD}$ must be evaluated at the operating point ($V_{\\mathrm{out}}$, $V_{\\mathrm{cont}}$).\n- Because the noise is common-mode to both $L_1$ branches, there is no differential cancellation; the full $K_{VDD}$ applies.",
        "format": "markdown",
        "sha256": "419d2d08006ec0698d1a219d443e6fdfc1a8fe0ea0ab7ca3c2fac04d0a6cfb29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly uses supply pushing and the FM-to-PM conversion, giving the expected Kpush²Sth/(2Δf²) dependence. It misses the circuit-specific insight that the supply perturbation acts directly on the varactors, making Kpush closely related to KVCO, and instead offers a potentially misleading explanation based on transistor parasitics.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 27761,
        "total_tokens": 29597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 27761,
        "total_tokens": 29597,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, **Vout** feeds the center-tap of the LC tank (through L₁). The LDO thermal noise vₙ(t) (with one-sided PSD Sₜₕ(f) in V²/Hz) therefore modulates the DC bias of the cross-coupled pair M₁/M₂ and the varactors Mᵥ₁/Mᵥ₂. This changes their parasitic capacitances (Cgd, Cdb, Cgs, Cvar) and thus the total tank capacitance Cₜₒₜ, shifting the oscillation frequency. The computation proceeds in three steps:\n\n---\n\n### 1. Supply-pushing coefficient\nDefine the VCO supply-pushing gain (measure by simulation or analysis):\n\n\\[\nK_f = \\frac{\\partial f_{\\mathrm{osc}}}{\\partial V_{\\mathrm{out}}}\\quad[\\mathrm{Hz/V}]\n\\qquad\\text{or}\\qquad\nK_\\omega = \\frac{\\partial \\omega_{\\mathrm{osc}}}{\\partial V_{\\mathrm{out}}}=2\\pi K_f\\quad[\\mathrm{rad\\cdot s^{-1}/V}]\n\\]\n\nFor this tank, K can be approximated from the voltage-dependent capacitances:\n\n\\[\nK_\\omega \\approx -\\frac{\\omega_0}{2C_{\\mathrm{tot}}}\\frac{\\partial C_{\\mathrm{tot}}}{\\partial V_{\\mathrm{out}}}\n\\]\n\nwhere Cₜₒₜ includes all parasitics of M₁, M₂, Mᵥ₁, Mᵥ₂ and the inductors.\n\n---\n\n### 2. Frequency-modulation PSD\nThe noise voltage creates an instantaneous frequency deviation\n\n\\[\n\\Delta f(t) = K_f\\,v_n(t) \\;\\;\\Rightarrow\\;\\; S_{\\Delta f}(f) = K_f^2\\,S_{\\mathrm{th}}(f)\n\\]\n\nIn rad/s:  S_Δω(f) = K_ω² Sₜₕ(f).\n\n---\n\n### 3. FM → PM conversion (integration)\nPhase is the integral of frequency deviation:\n\n\\[\n\\phi(t) = 2\\pi\\int \\Delta f(\\tau)\\,d\\tau\n\\;\\;\\Rightarrow\\;\\;\n\\Phi(f) = \\frac{K_\\omega}{j2\\pi f}V(f)\n\\]\n\nHence the **phase-noise PSD** (two-sided, rad²/Hz) is\n\n\\[\nS_\\phi(f) = \\frac{K_\\omega^2}{(2\\pi f)^2}\\,S_{\\mathrm{th}}(f)\n= \\frac{K_f^2}{f^2}\\,S_{\\mathrm{th}}(f)\n\\]\n\nThe **single-sideband phase noise** L(f) (in rad²/Hz, or dBc/Hz) is half of that:\n\n\\[\n\\boxed{L(\\Delta f) = \\frac{1}{2}\\,S_\\phi(\\Delta f)\n= \\frac{1}{2}\\left(\\frac{K_f}{\\Delta f}\\right)^2 S_{\\mathrm{th}}(\\Delta f)}\n\\]\n\nor in dBc/Hz:\n\n\\[\n\\boxed{L(\\Delta f)\\;[\\mathrm{dBc/Hz}]\n= 10\\log_{10}\\!\\left[\\frac{1}{2}\\left(\\frac{K_f}{\\Delta f}\\right)^2 S_{\\mathrm{th}}(\\Delta f)\\right]}\n\\]\n\n---\n\n### Key points for this specific circuit\n- Because Δf ≪ f₀, the impedance of L₁ at the offset frequency is j2πΔf·L₁ ≈ 0, so the low-frequency supply noise couples **directly** to the tank center-tap with no attenuation.\n- The noise is **common-mode** to nodes X and Y, so it does not cancel differentially; instead it shifts both drain biases equally, changing Cdb/Cgd of M₁ and M₂ and the varactor capacitances together.\n- No ISF weighting is needed for this low-frequency (quasi-static) modulation; the entire effect is captured by K_f.\n\nSo to compute the actual curve: **measure K_f = df/dVout**, plug it into the formula above together with the LDO’s Sₜₕ(Δf).",
        "format": "markdown",
        "sha256": "6a040b2b62f3605959aaad83754c8aebf55f91299ff126f203bb197d9806384e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing, converts the LDO noise through df/dVout, and gives the expected 1/Δf² FM-to-PM relation. It notes direct coupling to the varactors, but omits the key design implication that Kpush is closely related to KVCO and reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 9083,
        "total_tokens": 10919,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 9083,
        "total_tokens": 10919,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the VCO phase-noise contribution from the LDO’s thermal noise, follow these three steps:\n\n### 1. Supply-pushing coefficient \\(K_{VDD}\\)\nThe LDO noise \\(v_n(t)\\) (with PSD \\(S_{th}(f)\\) in V²/Hz) slowly modulates \\(V_{out}\\). This shifts the tank capacitance \\(C_{eq}\\) (varactors \\(M_{V1},M_{V2}\\) plus the parasitics \\(C_{gs},C_{gd},C_{db}\\) of \\(M_1,M_2\\)) and therefore the oscillation frequency:\n\n\\[\nf_{osc}\\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{eq}(V_{out})}}\n\\]\n\nDefine the supply-pushing gain\n\n\\[\nK_{VDD}=\\frac{\\partial f_{osc}}{\\partial V_{DD}}\n= -\\frac{f_{osc}}{2C_{eq}}\\frac{dC_{eq}}{dV_{DD}}\n\\quad\\text{[Hz/V]}\n\\]\n\n### 2. From voltage noise to frequency noise\nThe instantaneous frequency deviation is\n\n\\[\n\\Delta f(t)=K_{VDD}\\,v_n(t)\n\\]\n\nso its power spectral density is\n\n\\[\nS_{\\Delta f}(f)=K_{VDD}^{2}\\,S_{th}(f)\\quad\\text{[Hz²/Hz]}\n\\]\n\n### 3. Integrate frequency → phase\nSince \\(\\phi(t)=2\\pi\\int \\Delta f(\\tau)\\,d\\tau\\), in the Fourier domain \\(\\Phi(f)=\\Delta F(f)/(j f)\\). Hence the phase-fluctuation PSD is\n\n\\[\nS_{\\phi}(f)=\\frac{S_{\\Delta f}(f)}{f^{2}}\n= \\frac{K_{VDD}^{2}\\,S_{th}(f)}{f^{2}}\n\\quad\\text{[rad²/Hz]}\n\\]\n\nThe **single-sideband phase noise** \\(L(f)\\) (in rad²/Hz, or dBc/Hz) is one-half of \\(S_\\phi\\):\n\n\\[\n\\boxed{L(f)=\\frac{1}{2}S_{\\phi}(f)=\\frac{K_{VDD}^{2}\\,S_{th}(f)}{2f^{2}}}\n\\]\n\nIn dBc/Hz:\n\n\\[\n\\boxed{L(f)\\;[\\mathrm{dBc/Hz}]\n=10\\log_{10}\\!\\left[\\frac{K_{VDD}^{2}\\,S_{th}(f)}{2f^{2}}\\right]}\n\\]\n\n---\n\n**Key points for this circuit**\n- Because the inductors \\(L_1\\) have negligible impedance at offset frequencies \\(f\\) (mHz–MHz range) compared with the tank impedance, the nodes \\(X,Y\\) see the full supply noise \\(v_n\\).\n- The contribution falls as \\(1/f^{2}\\) (–20 dB/decade), which is the classic “supply-noise-induced” region of the VCO phase-noise plot.\n- To get a numerical value you first evaluate (or measure) \\(K_{VDD}\\) for the specific \\(C_{eq}(V_{out})\\) formed by the switched banks \\(B_1,B_2\\), the varactors \\(M_{V1},M_{V2}\\), and the transistor parasitics.",
        "format": "markdown",
        "sha256": "0df6586bff1e58959c8b6cb23039240aae60f0fe87e765f54268769b82b46d51"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly converts LDO voltage noise through supply pushing to frequency noise and then to phase noise with the expected 1/offset² dependence and SSB factor. It does not explicitly give the circuit’s key design insight that Kpush is closely related to KVCO and reducing KVCO reduces the conversion; the extra L1 claim is not needed.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 13844,
        "total_tokens": 15680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 13844,
        "total_tokens": 15680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding the capacitor **C_T** from the common-source tail node **P** to ground **improves (lowers) the phase noise**, especially the close-in **1/f³** region. Here is why:\n\n### 1. What happens at the tail node?\n- At the oscillation frequency **f₀**, the currents in M₁ and M₂ are differential (opposite phase). Their sum is ≈0, so node **P** is already a **virtual AC ground** regardless of C_T. The differential oscillation is essentially unchanged.\n- At **2f₀**, however, the currents in M₁ and M₂ are **in-phase** (common-mode). Without C_T, the impedance at P is very high (set by the current-source transistor), so a **large second-harmonic voltage swing** builds up at P.\n\n### 2. The noise-upconversion mechanism\nThe tail bias source (I_SS and its transistor) generates noise—particularly **1/f flicker noise** and thermal noise. Because M₁ and M₂ switch on and off, their transconductance **g_m(t)** is periodic with strong Fourier components at DC and **2f₀**.\n\nThe large **V_P(2f₀)** swing modulates V_GS of the pair, making g_m(t) vary at 2f₀. The tail noise is multiplied by this time-varying g_m, mixing low-frequency noise up to sidebands near **f₀**. This is the dominant source of close-in (1/f³) phase noise in tail-biased LC oscillators.\n\n### 3. Effect of C_T\nC_T is chosen large enough so that at **2f₀**:\n$$|Z_{C_T}| = \\frac{1}{2\\omega_0 C_T} \\ll R_{\\text{tail}}$$\nThus, **C_T shorts the tail node to ground at 2f₀**, suppressing V_P(2f₀).\n\nConsequences:\n- The **2f₀ modulation of g_m** is greatly reduced.\n- The **upconversion of tail flicker and thermal noise** into the tank is suppressed.\n- The common-mode noise current at high frequencies is shunted away from the transistors.\n\n### 4. Result\n- **Phase noise decreases**, most noticeably near the carrier (lower 1/f³ corner and lower 1/f² floor contribution from the tail).\n- The oscillation conditions at f₀ are **not degraded** because P remains a virtual ground for differential signals; C_T only affects common-mode/harmonic behavior.\n\n> **In short:** C_T acts as a **tail-filter / bypass capacitor** at 2f₀. It suppresses the second-harmonic swing at the common source, cutting off the main path by which tail-current noise is upconverted, thereby **lowering the overall phase noise**.",
        "format": "markdown",
        "sha256": "5d5d198ecf2183700ce050e14cd228ae2127c7627382c12ce590c6b1e4da12ed"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer predicts a monotonic phase-noise improvement from shunting the tail node, missing the nonmonotonic behavior: class-C-like switching can improve phase noise, while flicker-noise upconversion, triode operation, or low-frequency instability can worsen it.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 10487,
        "total_tokens": 12812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 10487,
        "total_tokens": 12812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding the capacitor **C_T** from the tail node (P) to ground is a classic “tail-filter” technique. Its main effect on phase noise is **beneficial: the close-in (1/f³) noise is significantly reduced, while the far-out (1/f²) noise is largely unchanged** (sometimes slightly improved).\n\nHere is why:\n\n### 1. Suppression of the 2nd-harmonic swing at the tail\nIn a differential LC oscillator, the two sides switch, so the **common-source node P swings at twice the oscillation frequency (2f₀)**. Without C_T, this 2f₀ voltage swing is large because the tail current source presents a high impedance.\n\nThis large 2f₀ swing modulates the gate-source voltage of the tail current-source transistor, causing its **1/f (flicker) noise** to be multiplied (mixed) with the 2f₀ tone. The resulting sidebands appear near DC and are then upconverted back around f₀, producing the **1/f³ phase-noise region** close to the carrier.\n\nBy placing **C_T** at node P, you provide a **low-impedance AC path to ground at 2f₀** (and other high frequencies). This suppresses the 2f₀ voltage swing, breaking the mixing path and **greatly reducing the flicker-noise upconversion**.\n\n### 2. Filtering of current-source noise\nC_T also shunts high-frequency thermal noise from the bias source I_SS away from the tank, though this is a secondary effect.\n\n### 3. Differential mode is unaffected\nBecause node P is a **virtual ground for the differential signal** at f₀, C_T does not change the tank Q, the oscillation frequency, or the loop gain in differential mode. Thus the **1/f² (far-out) phase noise**, which is dominated by the tank losses and the cross-coupled pair (M₁, M₂), remains essentially the same.\n\n---\n\n**Summary:**  \n- **1/f³ (close-in):** **Improved / lowered** – the upconversion of tail-transistor flicker noise is suppressed.  \n- **1/f² (far-out):** **Approximately unchanged** – the differential tank behavior is not altered.\n\nIf C_T is made very large, care must be taken to avoid common-mode startup issues or excessive area, but for phase noise it is a standard remedy to clean up the close-in spectrum.",
        "format": "markdown",
        "sha256": "1ccfc7dbecb02560a31c0d45b63ea063f72afb96a57fcb0a91c44d4f8ed58ad9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a generally beneficial, monotonic phase-noise improvement from filtering the tail node. It misses the nonmonotonic behavior, the class-C improvement mechanism, and the possible degradations identified in the golden solution.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 9173,
        "total_tokens": 11498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 9173,
        "total_tokens": 11498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8649,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding the capacitor **C_T** from the common-source (tail) node **P** to ground is the classic “tail-bypass” or “tail-filter” technique. Its main effect on phase noise is **positive: the close-in (1/f³) phase noise is reduced** (the 1/f³ corner is pushed lower).\n\nHere is why:\n\n| Effect of C_T | Consequence for phase noise |\n|---|---|\n| **AC ground at 2f₀ (and harmonics)** | C_T presents a very low impedance at the second harmonic (and above). This suppresses the large **2f₀ voltage swing** that normally appears at the tail node. |\n| **Reduces ISF asymmetry** | Without C_T, the tail-node swing at 2f₀ makes the Impulse Sensitivity Function (ISF) of the tail current source asymmetric, giving a non-zero DC coefficient **c₀**. With C_T, the source nodes are AC-grounded, the ISF becomes symmetric, and **c₀ ≈ 0**. |\n| **Less upconversion of 1/f noise** | The tail transistor’s flicker (1/f) noise is multiplied by the switching function of the pair. The c₀ and c₂ coefficients govern upconversion to sidebands near f₀. Suppressing them cuts the **1/f³** contribution dramatically. |\n| **Shunts high-freq noise** | At f₀, |Z_C| ≈ 1/(ω₀C_T) is very small (a few ohms for typical values), so thermal/noise currents from I_SS are diverted to ground rather than entering M₁/M₂. |\n\n### Bottom line\n- **1/f³ region (close-in):** Significantly improved (lower). This is the primary reason for adding C_T.\n- **1/f² region (far-out):** Usually unchanged or slightly better, because the differential tank is unaffected (node P is already a virtual ground for differential signals), and high-frequency tail noise is shunted away.\n\n**Trade-off:** C_T must be large enough (typically several pF) to be effective at 2f₀, but it occupies area and adds parasitic capacitance at node P (though this is in the common-mode path and does not load the differential LC tank).",
        "format": "markdown",
        "sha256": "2445d2a41ef0bda8f8814855d0feab43c538ede32e7be1afc1b87195c29887e1"
      },
      "model_call_count": 3,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT monotonically improves phase noise through tail-node filtering. The effect is nonmonotonic: CT can cause M1/M2 flicker-noise upconversion at small values, enable a class-C-like phase-noise improvement at moderate values, and cause instability if too large.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 6118,
        "output_tokens": 39088,
        "total_tokens": 45206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38037,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 16361,
        "total_tokens": 18686,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 3,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have **four identical LC tanks** (inductors X₁, Y₁, X₂, Y₂) with cross‑coupled transistor pairs (CMOS or BJT) and tail current sources (Iₛₛ, I₁). This is a **coupled quadrature (four‑phase) LC oscillator**:\n\n* Each inductor L (X₁…Y₂) connects a supply rail to a node.\n* At each node, transistor parasitics and any explicit capacitance form an equivalent tank capacitance C.\n* The cross‑coupled pairs in the top and bottom sections provide the negative resistance needed for oscillation.\n* The horizontal connections between the two sections couple all four tanks in a ring.\n\n### Resonant frequency of one tank\nFor a single‑ended LC tank with inductance L and node capacitance C:\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}} \\quad\\Rightarrow\\quad f_0 = \\frac{1}{2\\pi\\sqrt{LC}}$$\n\n### Effect of coupling\nWith four identical tanks coupled in a ring, the system supports four modes. The **quadrature modes** (90° apart, which are the ones that actually oscillate in this topology) occur exactly at the uncoupled natural frequency:\n$$\\omega_{\\text{osc}} \\approx \\omega_0 = \\frac{1}{\\sqrt{LC}}$$\n\nThe other coupled modes are split away by the coupling coefficient κ, but the oscillator locks to the quadrature mode.\n\n### Estimate\nAssuming all four inductors have the same value L and each node sees the same equivalent capacitance C (transistor C₉ₛ, C₉d, Cdb, plus layout):\n\n$$\\boxed{f \\;\\approx\\; \\frac{1}{2\\pi\\sqrt{L\\,C}}}$$\n\nIf the tanks are interpreted as **differential pairs** (X₁–Y₁ and X₂–Y₂) with capacitance C placed differentially across each pair, the effective inductance per half‑tank is 2L and the formula becomes $f \\approx 1/[2\\pi\\sqrt{2LC}]$. For the usual four‑phase coupled‑ring interpretation, however, the result is $f \\approx 1/[2\\pi\\sqrt{LC}]$.",
        "format": "markdown",
        "sha256": "5e20994ad8e95ccaf6fa54cd616f3b088ca3837191de8035c00e8cc28fcb3f99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly gives the uncoupled LC tank frequency, but it incorrectly claims the quadrature mode oscillates exactly there. It omits the essential coupling-induced frequency shift, approximately ±αω₀/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 13485,
        "total_tokens": 15490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 13485,
        "total_tokens": 15490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer:** The circuit is a set of coupled LC‑tank oscillators (two differential pairs, top and bottom).  \nWith each coil having inductance **L** and the total parasitic/explicit capacitance at each node being **C**, the oscillation occurs near the resonant frequency of the individual tanks. For the cross‑coupled differential pairs (X₁–Y₁ and X₂–Y₂) the natural mode is\n\n\\[\n\\boxed{f_{\\mathrm{osc}}\\;\\approx\\;\\frac{1}{2\\pi\\sqrt{LC}}}\n\\]\n\n---\n\n### How to get this result\n\n1. **Identify the resonant tanks**  \n   - Each corner node (X₁, Y₁, X₂, Y₂) is connected to a supply rail through an inductor (L).  \n   - The MOSFET pairs provide the negative resistance (`‑R`) needed to cancel losses, but they also contribute the dominant capacitance at each node:  \n     \\(C \\approx C_{gs}+C_{gd}+C_{db}+C_{\\mathrm{inductor}}\\).\n\n2. **Write the KCL for one differential pair** (e.g. X₁ and Y₁)  \n   Each node sees an impedance to AC ground:\n   \\[\n   Z(j\\omega)=j\\omega L \\;\\Big\\|\\; \\frac{1}{j\\omega C}\n   =\\frac{j\\omega L}{1-\\omega^{2}LC}\n   \\]\n   The cross‑coupled transistors inject a current proportional to the voltage at the opposite node (\\(I_{\\mathrm{couple}}\\propto -g_m V_{\\mathrm{other}}\\)).\n\n3. **Solve for the pole (natural frequency)**  \n   Setting up the 2×2 system for \\(V_{X_1}\\) and \\(V_{Y_1}\\) and requiring a non‑trivial solution gives the characteristic equation\n   \\[\n   \\left(\\frac{1}{Z}\\right)^{2}-g_m^{2}=0\n   \\quad\\Longrightarrow\\quad\n   j\\!\\left(\\omega C-\\frac{1}{\\omega L}\\right)=\\pm g_m .\n   \\]\n   The imaginary part must vanish, so\n   \\[\n   \\omega C = \\frac{1}{\\omega L}\n   \\;\\Longrightarrow\\;\n   \\omega^{2}=\\frac{1}{LC}.\n   \\]\n\n4. **Coupling between the four nodes**  \n   The bottom pair (X₂–Y₂) is identical, and the four tanks are coupled through the shared transistor network. This splits the spectrum into four modes, but the **center frequency** of the cluster remains \\(\\omega_0=1/\\sqrt{LC}\\). The mode that actually starts oscillating (the one with the largest negative resistance) lies within a few percent of \\(\\omega_0\\).\n\nHence, to first order,\n\n\\[\n\\boxed{f \\approx \\frac{1}{2\\pi\\sqrt{LC}}}\n\\]\n\nIf you substitute typical on‑chip values (e.g. \\(L\\sim 1\\!-\\!10\\;\\mathrm{nH}\\), \\(C\\sim 0.1\\!-\\!2\\;\\mathrm{pF}\\)), you get frequencies in the **1–10 GHz** range, which is the usual operating region for such RF quadrature/coupled oscillators.",
        "format": "markdown",
        "sha256": "0c5057bdcb600fd132560191e9f57792841ab4e8b17ce0bb07b8e63bfda9d5a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the tank resonance as the baseline, but omits the essential coupling-induced frequency shift and incorrectly argues that coupling leaves the oscillation frequency at resonance.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 12947,
        "total_tokens": 14952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 12947,
        "total_tokens": 14952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, we have **two identical differential LC tanks** (top: nodes X₁,Y₁; bottom: X₂,Y₂) that are coupled together. Each tank consists of two inductors (value L) with their “center tap” at the supply rail and a total parasitic capacitance C (from the cross‑coupled transistor pairs and layout).\n\n### 1. Resonant frequency of one tank\nFor the differential mode the two inductors appear in series with the differential capacitance, but because the capacitance is distributed (C at each node to ground and across the pair), the standard result for a differential LC oscillator is\n\n\\[\n\\omega_0 = \\frac{1}{\\sqrt{LC}} \\quad\\Longrightarrow\\quad \nf_0 \\approx \\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n\n### 2. Cross‑coupled pairs and coupling\nInside each box there are **two cross‑coupled transistor pairs**:\n* One pair is biased by the tail current **I_SS** (this provides the negative resistance that sustains oscillation).\n* The other pair is biased by **I₁** (this couples the top oscillator to the bottom one).\n\nIf we call the transconductance of the main pair \\(g_{m,SS}\\propto I_{SS}\\) and that of the coupling pair \\(g_{m,1}\\propto I_1\\), the coupling coefficient is\n\n\\[\nk \\approx \\frac{g_{m,1}}{g_{m,SS}} \\approx \\frac{I_1}{I_{SS}}\n\\]\n\n### 3. Coupled‑oscillator (quadrature) modes\nThe two tanks are coupled, so the system has two possible oscillation modes (the quadrature I/Q modes). Solving the coupled differential equations gives\n\n\\[\n\\omega^2 = \\omega_0^2\\,(1\\pm k)\n\\]\n\nHence\n\n\\[\n\\boxed{\\,f \\;\\approx\\; f_0\\sqrt{1\\pm\\frac{I_1}{I_{SS}}}\n      \\;=\\; \\frac{1}{2\\pi\\sqrt{LC}}\\sqrt{1\\pm\\frac{I_1}{I_{SS}}}\\,}\n\\]\n\nFor the usual case of weak coupling (\\(I_1 \\ll I_{SS}\\)) this expands to\n\n\\[\nf \\approx \\frac{1}{2\\pi\\sqrt{LC}}\\left[1 \\pm \\frac{1}{2}\\frac{I_1}{I_{SS}}\\right]\n\\]\n\n### Bottom line\nThe circuit is a **quadrature LC VCO**. Its oscillation frequency is centered on the tank resonant frequency \\(f_0=1/(2\\pi\\sqrt{LC})\\) and is pulled slightly up/down by the coupling current \\(I_1\\). If you substitute the actual values of L and C (and the transistor parasitics) into \\(f_0\\), you get the specific frequency; symbolically it is given by the formula above.",
        "format": "markdown",
        "sha256": "3129d0cb97350844ad042841c5a278e62110941823450aa0219da7b5da736f20"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the tank resonance and a coupling-induced shift with two possible modes, but omits the essential 1/Q factor. Its predicted shift is therefore substantially too large and does not match the required estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3469,
        "output_tokens": 26121,
        "total_tokens": 29590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 19849,
        "total_tokens": 21854,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19191,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
