{
  "model_key": "inkling_small",
  "display_name": "Inkling Small",
  "provider": "thinkingmachines",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Inkling Small answered the 50 tasks in three rollouts through OpenRouter's chat completions route (thinkingmachines/inkling-small) at maximum reasoning effort. Requests set temperature to 0 and max_tokens to 262,144, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Inkling Small on 2026-11-10 ($0.45 input, $0.10 cached input, $1.20 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 68,
          "incorrect_count": 82,
          "partial_credit_count": 46,
          "zero_count": 36,
          "mean_score_0_to_4": 2.34,
          "score_percent": 58.5,
          "score_distribution": {
            "0": 36,
            "1": 23,
            "2": 13,
            "3": 10,
            "4": 68
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 68,
          "incorrect_count": 82,
          "partial_credit_count": 46,
          "zero_count": 36,
          "mean_score_0_to_4": 2.34,
          "score_percent": 58.5,
          "score_distribution": {
            "0": 36,
            "1": 23,
            "2": 13,
            "3": 10,
            "4": 68
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 54,
          "incorrect_count": 36,
          "partial_credit_count": 8,
          "zero_count": 28,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 28,
            "1": 2,
            "2": 2,
            "3": 4,
            "4": 54
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 54,
          "incorrect_count": 36,
          "partial_credit_count": 8,
          "zero_count": 28,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 28,
            "1": 2,
            "2": 2,
            "3": 4,
            "4": 54
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 14,
          "incorrect_count": 46,
          "partial_credit_count": 38,
          "zero_count": 8,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 8,
            "1": 21,
            "2": 11,
            "3": 6,
            "4": 14
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 14,
          "incorrect_count": 46,
          "partial_credit_count": 38,
          "zero_count": 8,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 8,
            "1": 21,
            "2": 11,
            "3": 6,
            "4": 14
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 23,
        "incorrect_count": 27,
        "partial_credit_count": 18,
        "zero_count": 9,
        "mean_score_0_to_4": 2.48,
        "score_percent": 62.0,
        "score_distribution": {
          "0": 9,
          "1": 9,
          "2": 4,
          "3": 5,
          "4": 23
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 23,
        "incorrect_count": 27,
        "partial_credit_count": 14,
        "zero_count": 13,
        "mean_score_0_to_4": 2.26,
        "score_percent": 56.49999999999999,
        "score_distribution": {
          "0": 13,
          "1": 9,
          "2": 3,
          "3": 2,
          "4": 23
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 22,
        "incorrect_count": 28,
        "partial_credit_count": 14,
        "zero_count": 14,
        "mean_score_0_to_4": 2.28,
        "score_percent": 56.99999999999999,
        "score_distribution": {
          "0": 14,
          "1": 5,
          "2": 6,
          "3": 3,
          "4": 22
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 26496,
        "input_tokens": 262446,
        "output_tokens": 3256994,
        "total_tokens": 3519440
      },
      "known_totals": {
        "cached_input_tokens": 26496,
        "input_tokens": 262446,
        "output_tokens": 3256994,
        "total_tokens": 3519440
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 19,
          "incorrect_count": 11,
          "partial_credit_count": 4,
          "zero_count": 7,
          "mean_score_0_to_4": 2.9,
          "score_percent": 72.5,
          "score_distribution": {
            "0": 7,
            "2": 1,
            "3": 3,
            "4": 19
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 18,
          "incorrect_count": 12,
          "partial_credit_count": 2,
          "zero_count": 10,
          "mean_score_0_to_4": 2.533333333333333,
          "score_percent": 63.33333333333333,
          "score_distribution": {
            "0": 10,
            "1": 1,
            "3": 1,
            "4": 18
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 17,
          "incorrect_count": 13,
          "partial_credit_count": 2,
          "zero_count": 11,
          "mean_score_0_to_4": 2.3666666666666667,
          "score_percent": 59.166666666666664,
          "score_distribution": {
            "0": 11,
            "1": 1,
            "2": 1,
            "4": 17
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 4,
          "incorrect_count": 16,
          "partial_credit_count": 14,
          "zero_count": 2,
          "mean_score_0_to_4": 1.85,
          "score_percent": 46.25,
          "score_distribution": {
            "0": 2,
            "1": 9,
            "2": 3,
            "3": 2,
            "4": 4
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 12,
          "zero_count": 3,
          "mean_score_0_to_4": 1.85,
          "score_percent": 46.25,
          "score_distribution": {
            "0": 3,
            "1": 8,
            "2": 3,
            "3": 1,
            "4": 5
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 12,
          "zero_count": 3,
          "mean_score_0_to_4": 2.15,
          "score_percent": 53.75,
          "score_distribution": {
            "0": 3,
            "1": 4,
            "2": 5,
            "3": 3,
            "4": 5
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a single MOSFET is\n\n\\[\nA_0 = g_m r_o\n\\]\n\nwhere \\(g_m\\) is the transconductance and \\(r_o\\) is the output resistance.\n\n---\n\n### 1. Effect on \\(g_m\\)\n\nIn saturation (square-law, long-channel):\n\n\\[\ng_m = \\mu C_{ox}\\frac{W}{L}V_{ov} = \\frac{2I_D}{V_{ov}}\n\\]\n\nIf you **double both** \\(W\\) and \\(L\\):\n\n\\[\n\\frac{W}{L} \\rightarrow \\frac{2W}{2L} = \\frac{W}{L}\n\\]\n\nSo, **\\(g_m\\) stays the same**, provided the drain current \\(I_D\\) and overdrive \\(V_{ov}\\) are unchanged.\n\n---\n\n### 2. Effect on \\(r_o\\)\n\nChannel-length modulation gives:\n\n\\[\nr_o = \\frac{1}{\\lambda I_D} \\approx \\frac{V_A}{I_D}\n\\]\n\nThe Early voltage is roughly proportional to channel length:\n\n\\[\nV_A \\propto L \\quad\\Rightarrow\\quad \\lambda \\propto \\frac{1}{L}\n\\]\n\nTherefore:\n\n\\[\nr_o \\propto L\n\\]\n\nDoubling \\(L\\) **doubles** \\(r_o\\).\n\n---\n\n### 3. Intrinsic gain\n\n\\[\nA_0 = g_m r_o \\;\\Rightarrow\\; A_0' = g_m (2r_o) = 2A_0\n\\]\n\nUsing the common form \\(A_0 \\approx \\dfrac{2V_A}{V_{ov}} \\approx \\dfrac{2E_C L}{V_{ov}}\\), gain is directly proportional to \\(L\\).\n\n---\n\n## Answer\n\n**The intrinsic gain roughly doubles** (increases by a factor of 2).\n\n- **Why:** \\(W/L\\) is unchanged → \\(g_m\\) unchanged; but longer \\(L\\) raises \\(r_o\\) (lower \\(\\lambda\\)) by 2×.\n- **Assumption:** Long-channel operation, constant \\(I_D\\) and \\(V_{ov}\\). (In short-channel regimes \\(V_{th}\\) may shift with \\(L\\), but the dominant trend is still higher gain with longer \\(L\\).)\n\nIf you instead scale \\(I_D\\) proportionally to \\(W\\) to keep current density constant, \\(V_{ov}\\) rises by \\(\\sqrt{2}\\) and the gain improves by \\(\\sqrt{2}\\) — but the classic textbook answer for “double both \\(W\\) and \\(L\\)” is **gain × 2**.",
        "format": "markdown",
        "sha256": "785d36d459f7cd4a01a895c1a82c5da647700e1205a2c29fcd2485af38ef798e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that doubling both dimensions leaves W/L and, at fixed overdrive, drain current and gm approximately unchanged, while the longer channel roughly doubles ro. Thus intrinsic gain roughly doubles, as in the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 3162,
        "total_tokens": 3196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 3162,
        "total_tokens": 3196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2233,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Intrinsic (small-signal) gain of a single MOSFET is\n\n\\[\nA_{v0}=g_m r_o\n\\]\n\nwhere \\(r_o\\) is the output resistance and \\(g_m\\) is the transconductance.\n\n### 1. What happens to \\(g_m\\)?\nIn the long-channel (square-law) regime:\n\n\\[\nI_D = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{th})^2\n\\quad\\Rightarrow\\quad\ng_m = \\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{th}) = \\frac{2I_D}{V_{ov}}\n\\]\n\nIf you **double both** \\(L\\) and \\(W\\):\n\n- The aspect ratio \\(W/L\\) stays the same.\n- If you keep the same terminal voltages (\\(V_{GS}, V_{DS}\\)) and thus the same bias current \\(I_D\\), the overdrive \\(V_{ov}=V_{GS}-V_{th}\\) is unchanged.\n- Therefore **\\(g_m\\) remains essentially unchanged**.\n\n*(In velocity-saturation, \\(g_m \\approx W C_{ox}v_{sat}\\), so doubling \\(W\\) would double \\(g_m\\); see note below.)*\n\n### 2. What happens to \\(r_o\\)?\nChannel-length modulation gives\n\n\\[\nr_o = \\frac{1}{\\lambda I_D}, \\qquad \\lambda \\propto \\frac{1}{L}\n\\]\n\nBecause the effective-channel-length reduction \\(\\Delta L\\) is roughly independent of \\(L\\) for a given \\(V_{DS}\\), the parameter \\(\\lambda\\) scales as \\(1/L\\).\n\n- Doubling \\(L\\) **halves** \\(\\lambda\\).\n- With the same \\(I_D\\), \\(r_o\\) **doubles**:\n\n\\[\nr_o' = \\frac{1}{(\\lambda/2)I_D} = 2r_o\n\\]\n\n### 3. Intrinsic gain\n\\[\nA_{v0}' = g_m' r_o' \\approx g_m (2r_o) = 2A_{v0}\n\\]\n\n---\n\n## Answer\n**Under the usual assumption that you scale \\(W\\) with \\(L\\) to keep \\(W/L\\) (and thus \\(I_D\\) and \\(V_{ov}\\)) constant, the intrinsic gain roughly doubles** (\\(2\\times\\)) because \\(g_m\\) stays the same while \\(r_o \\propto L\\) doubles.\n\n---\n\n### Quick caveats / regimes\n| Regime / Biasing | \\(g_m\\) scaling | \\(r_o\\) scaling | Gain change |\n|------------------|----------------|----------------|-------------|\n| **Long-channel, constant \\(I_D\\)** (same \\(V_{ov}\\)) | unchanged (\\(\\propto W/L\\)) | \\(\\propto L\\) | **2×** |\n| **Long-channel, constant current density** (\\(I_D \\propto W\\)) | \\(\\propto \\sqrt{I_D} \\Rightarrow \\sqrt{2}\\times\\) | unchanged (because \\(\\lambda\\downarrow\\) cancels \\(I_D\\uparrow\\)) | **\\(\\sqrt{2}\\times\\)** |\n| **Velocity-saturation, constant \\(I_D\\)** | \\(\\propto W \\Rightarrow 2\\times\\) | \\(\\propto L \\Rightarrow 2\\times\\) | **4×** |\n\nSo for typical analog-design reasoning—“I made the transistor longer and wider to keep the same current and overdrive”—the intrinsic gain **doubles**.",
        "format": "markdown",
        "sha256": "e0dc1588db457966926fda22630044246bdc7fb3d7a44bce8f94321f5571bc52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that with both W and L doubled at fixed overdrive, W/L and gm remain approximately unchanged, while longer L reduces channel-length modulation and roughly doubles ro. Therefore intrinsic gain roughly doubles; the bias-condition caveats are consistent with the golden solution.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 5419,
        "total_tokens": 5453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 5419,
        "total_tokens": 5453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **intrinsic gain** of a MOSFET is usually defined as the gain of a common‑source stage with an ideal current‑source load:\n\n\\[\nA_0 = g_m \\, r_o\n\\]\n\nFor a long‑channel device in saturation:\n\n- **Transconductance**\n  \\[\n  g_m = \\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{th}) = \\frac{2I_D}{V_{ov}}\n  \\]\n\n- **Output resistance**\n  \\[\n  r_o = \\frac{1}{\\lambda I_D}, \\qquad \\lambda \\propto \\frac{1}{L}\n  \\]\n  so the Early voltage \\(V_A = 1/\\lambda \\propto L\\), and\n  \\[\n  r_o = \\frac{V_A}{I_D} \\propto L\n  \\]\n\n- **Overdrive**\n  \\[\n  V_{ov} = \\sqrt{\\frac{2I_D}{\\mu C_{ox}(W/L)}}\n  \\]\n\n---\n\n### What happens when you double both \\(L\\) and \\(W\\) (\\(\\alpha = 2\\))?\n\nThe key is the **ratio \\(W/L\\)**. Since both dimensions scale by the same factor:\n\n\\[\n\\frac{W}{L} \\;\\rightarrow\\; \\frac{2W}{2L} = \\frac{W}{L}\n\\]\n\nAssuming you keep the **same bias current** \\(I_D\\) (or the same \\(V_{GS}\\)):\n\n1. **\\(g_m\\) stays the same**\n   - \\(W/L\\) is unchanged.\n   - With \\(I_D\\) unchanged, \\(V_{ov}\\) is unchanged.\n   - Hence \\(g_m = 2I_D/V_{ov}\\) does not change.\n\n2. **\\(r_o\\) doubles**\n   - Channel‑length modulation \\(\\lambda \\propto 1/L\\), so \\(\\lambda\\) is halved.\n   - Early voltage \\(V_A \\propto L\\) doubles.\n   - Thus \\(r_o = V_A/I_D\\) **doubles**.\n\n3. **Intrinsic gain**\n   \\[\n   A_0 = g_m r_o \\;\\rightarrow\\; g_m (2r_o) = 2A_0\n   \\]\n\n---\n\n### Quick summary\n\n| Quantity | Scaling (\\(L\\to 2L,\\; W\\to 2W\\)) | Reason |\n|----------|----------------------------------|--------|\n| \\(W/L\\) | unchanged | both scale equally |\n| \\(I_D\\) (fixed \\(V_{GS}\\)) | unchanged | \\(W/L\\) unchanged |\n| \\(V_{ov}\\) | unchanged | depends on \\(I_D\\) and \\(W/L\\) |\n| \\(g_m\\) | **unchanged** | \\(g_m \\propto W/L \\cdot V_{ov}\\) |\n| \\(\\lambda\\) | **halved** | \\(\\lambda \\propto 1/L\\) |\n| \\(r_o\\) | **doubled** | \\(r_o \\propto L\\) |\n| **Intrinsic gain \\(g_m r_o\\)** | **doubles** | \\(\\approx 2V_A/V_{ov}\\) with \\(V_A\\propto L\\) |\n\n---\n\n### Caveat: constant current density\n\nIf instead you scale **current density** \\(J = I_D/W\\) (so \\(I_D\\) also doubles to \\(2I_D\\)):\n\n- \\(V_{ov} \\to \\sqrt{2}\\,V_{ov}\\) (because \\(I_D L/W\\) doubles)\n- \\(r_o = V_A/I_D \\to (2V_A)/(2I_D)\\) = unchanged\n- \\(g_m = 2I_D/V_{ov} \\to \\sqrt{2}\\,g_m\\)\n\nSo in that case \\(A_0\\) improves by **\\(\\sqrt{2}\\)**, not 2.\n\n---\n\n**Bottom line:** In the usual analog design context—where you scale the transistor but keep the drain current (or overdrive) the same—**doubling both length and width doubles the intrinsic gain** (\\(A_0 \\propto L\\)), because the longer channel gives higher output resistance while the transconductance stays unchanged.",
        "format": "markdown",
        "sha256": "cd99ad517f13b479bf212ad1cc99e7404e6a942ec6c2179a948ab67e05edda3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L and gm approximately unchanged, while the longer channel doubles ro, so intrinsic gain approximately doubles. The bias-condition caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 4433,
        "total_tokens": 4467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2988,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 4433,
        "total_tokens": 4467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2988,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what you’re holding constant, but the two formulas for the same thing explain both views:\n\nFor a long‑channel MOSFET in saturation:\n\n\\[\nI_D = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{ov}^2\n\\qquad\\text{with}\\qquad\nV_{ov}=V_{GS}-V_{th}\n\\]\n\nSo the small‑signal transconductance is\n\n\\[\ng_m = \\frac{dI_D}{dV_{GS}} = \\mu C_{ox}\\frac{W}{L}V_{ov}\n\\]\n\nand also\n\n\\[\ng_m = \\frac{2I_D}{V_{ov}}.\n\\]\n\n### 1. Student A is right if the **device** (W/L) is fixed\nIf you turn up \\(V_{GS}\\), then \\(V_{ov}\\) increases and \\(I_D\\) rises quadratically. Because \\(g_m \\propto V_{ov}\\) for that particular transistor, **\\(g_m\\) goes up** as the overdrive increases.\n\n### 2. Student B is right if **\\(I_D\\)** is held constant\nIf you force the same drain current but make \\(V_{ov}\\) larger (by shrinking W/L or using a weaker process), then\n\n\\[\ng_m = \\frac{2I_D}{V_{ov}}\n\\]\n\nmeans **\\(g_m\\) goes down** as \\(V_{ov}\\) increases.\n\n### The unifying view: \\(g_m/I_D\\)\nThe ratio\n\n\\[\n\\frac{g_m}{I_D} = \\frac{2}{V_{ov}}\n\\]\n\nshows the trade‑off clearly: at a **given current**, a larger overdrive gives lower transconductance per amp (less “gain efficiency”). But if you just bias a fixed transistor harder (raise \\(V_{GS}\\)), both \\(V_{ov}\\) and \\(g_m\\) rise together.\n\n**Bottom line:**  \n- **Student A** is correct for a given MOSFET as you increase \\(V_{GS}\\).  \n- **Student B** is correct when comparing different devices/bias choices at the **same** \\(I_D\\).\n\nSo they’re describing the same equation from two different constraints.",
        "format": "markdown",
        "sha256": "7fc6a4325a41345f2992ce334733b3447fc75bf50a31b68a017a0f836f9f25dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L, explaining that increasing overdrive raises drain current and gm. It also accurately notes Student B's result applies when current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 46,
        "output_tokens": 1732,
        "total_tokens": 1778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 46,
        "output_tokens": 1732,
        "total_tokens": 1778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what you’re holding constant.\n\nIn strong‑inversion saturation:\n\n\\[\ng_m = \\mu C_{ox}\\frac{W}{L}V_{ov} = \\frac{2I_D}{V_{ov}}\n\\]\n\nwhere \\(V_{ov}=V_{GS}-V_{th}\\).\n\n- **Fixed \\(W/L\\) (device geometry), raise \\(V_{GS}\\):**  \n  \\(I_D\\) grows as \\(V_{ov}^2\\), and \\(g_m\\) grows **linearly** with \\(V_{ov}\\).  \n  → **Student A is right.**\n\n- **Fixed \\(I_D\\) (current budget), vary \\(V_{ov}\\) by sizing or \\(V_{th}\\):**  \n  \\(g_m = 2I_D/V_{ov}\\), so larger overdrive means **lower** \\(g_m\\).  \n  → **Student B is right.**\n\n**Bottom line:**  \nIf you’re turning up \\(V_{GS}\\) on the same transistor, \\(g_m\\) goes up. If you’re designing at a fixed current and choosing a larger \\(V_{ov}\\) (e.g., smaller \\(W/L\\) or higher \\(V_{th}\\)), \\(g_m\\) goes down. Both formulas are correct; the “up or down” answer depends on the constraint.",
        "format": "markdown",
        "sha256": "9ee873070e0004c5c8d1d8d02de46354f0a9c3b75cc5b0f864182dc9a9278f69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for a fixed device geometry, increasing overdrive increases drain current as Vov² and gm linearly, so Student A is right. It also correctly notes the fixed-current condition under which Student B’s claim holds.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 46,
        "output_tokens": 910,
        "total_tokens": 956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 46,
        "output_tokens": 910,
        "total_tokens": 956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer: **it depends on what you are holding constant.** Both formulas are correct, so each student is right under a different assumption.\n\nFor a long‑channel MOSFET in saturation:\n\n\\[\nI_D = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{OV}^2\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_{TH}\\).\n\nFrom this, two common expressions for small‑signal transconductance come out:\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu C_{ox}\\frac{W}{L}V_{OV}\n\\tag{1}\n\\]\n\n\\[\ng_m = \\frac{2I_D}{V_{OV}}\n\\tag{2}\n\\]\n\n---\n\n### Case 1: Fixed transistor (fixed \\(W/L\\)), you raise \\(V_{GS}\\)\n- \\(I_D\\) grows quadratically with \\(V_{OV}\\).\n- From (1), **\\(g_m\\) increases linearly with \\(V_{OV}\\)**.\n- **Student A is correct.**\n\nWhy? A larger overdrive means a denser inversion layer, so a small change in \\(V_{GS}\\) causes a larger change in drain current.\n\n---\n\n### Case 2: Fixed bias current \\(I_D\\), you change \\(V_{OV}\\) by sizing\n- You could have a small \\(W/L\\) with large \\(V_{OV}\\) or a large \\(W/L\\) with small \\(V_{OV}\\).\n- From (2), **\\(g_m\\) is inversely proportional to \\(V_{OV}\\)**.\n- **Student B is correct.**\n\nWhy? To keep the same current with a larger overdrive, you need a “weaker” transistor (smaller \\(W/L\\)), which gives less current change per volt of gate swing.\n\n---\n\n### The physical intuition\n- **Along a single DC curve** (\\(W/L\\) constant): \\(g_m\\) rises with \\(V_{OV}\\).\n- **Across design choices** (constant \\(I_D\\)): a larger \\(V_{OV}\\) means lower \\(g_m/I_D\\) efficiency; i.e., you pay in transconductance for that overdrive.\n\nAlso, in short‑channel devices with velocity saturation, \\(g_m\\) eventually saturates to roughly \\(W C_{ox} v_{sat}\\) and stops growing with \\(V_{OV}\\).\n\n---\n\n**Bottom line:**  \n- If you mean “turn up \\(V_{GS}\\) on the same MOSFET,” **Student A** is right (\\(g_m \\uparrow\\) with \\(V_{OV}\\)).  \n- If you mean “compare two devices running the same \\(I_D\\) but with different overdrive voltages,” **Student B** is right (\\(g_m \\downarrow\\) as \\(V_{OV}\\) increases).\n\nThe two students are arguing about the same equations but different constraints—so the real answer is **“Both, depending on what’s held constant.”**",
        "format": "markdown",
        "sha256": "a0a909de6e61ef9e92b99e64f46d03b9fc92afc361b18216a5a2900ab96fca72"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size, where gm increases with overdrive, and explains that Student B is right only when drain current is held fixed while sizing changes.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 46,
        "output_tokens": 2140,
        "total_tokens": 2186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 46,
        "output_tokens": 2140,
        "total_tokens": 2186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is: **Topologically, yes—the small-signal equivalent circuit has the same form, but the controlling voltages and current directions are reversed if you use a consistent sign convention.** Once you account for that, the same model (hybrid-π or T-model) is used for both.\n\nHere is the detailed breakdown.\n\n---\n\n### 1. The circuit topology is identical\nFor both NMOS and PMOS in saturation, the small-signal model contains:\n- A **voltage-controlled current source**: $g_m v_{gs}$ (or $g_m v_{sg}$)\n- **Output resistance**: $r_o = 1/(\\lambda I_D)$\n- **Body-effect source**: $g_{mb} v_{bs}$ (or $g_{mb} v_{sb}$)\n- **Parasitic capacitances**: $C_{gs}, C_{gd}, C_{db}, C_{sb}$\n\nSo if you draw the two-port network, the **schematic structure is the same**.\n\n---\n\n### 2. The controlling voltage is reversed\nThe difference is purely one of **sign convention and DC polarity**.\n\n| Device | DC current direction | Controlling voltage (standard convention) | Small-signal relation |\n|--------|---------------------|-------------------------------------------|------------------------|\n| **NMOS** | Enters drain ($I_D > 0$) | $v_{GS} = V_G - V_S$ | $i_d = g_m v_{gs}$ (entering drain) |\n| **PMOS** | Leaves drain / enters source ($I_D < 0$ if entering drain) | $v_{SG} = V_S - V_G$ | $i_d = g_m v_{sg}$ (leaving drain / entering source) |\n\nIf you insist on using **$v_{gs} = v_G - v_S$ and defining $i_d$ as entering the drain for both devices**, the equation for PMOS is still $i_d = g_m v_{gs}$, but now $g_m$ is computed with $\\mu_p$ and $V_{SG} = V_S - V_G$. Physically, a positive $v_{gs}$ (gate moves up) turns the PMOS **off** more, so $I_D$ (entering drain) becomes less negative—hence $i_d > 0$.\n\nBecause of this, many textbooks (e.g., Sedra & Smith, Razavi) state: *“The PMOS small-signal model is identical to the NMOS model if $v_{gs}$ is replaced by $v_{sg}$ and the current-source arrow is reversed (S→D instead of D→S).”*\n\n---\n\n### 3. The parameter formulas are analogous\nThe expressions are identical in form, but with $\\mu_n \\leftrightarrow \\mu_p$ and the appropriate overdrive voltage ($V_{OV} = V_{GS} - V_{thn}$ vs. $V_{OV} = V_{SG} - |V_{thp}|$):\n\n$$\ng_m = \\mu C_{ox} \\frac{W}{L} V_{OV} = \\frac{2I_D}{V_{OV}} \\quad (\\text{neglecting } \\lambda)\n$$\n\n$$\nr_o = \\frac{1}{\\lambda I_D}, \\qquad g_{mb} = g_m \\frac{\\gamma}{2\\sqrt{2\\phi_F + V_{SB}}}\n$$\n\n**Important numerical differences:**\n- **Mobility**: $\\mu_n \\approx 2.5\\text{–}3 \\times \\mu_p$. So for the **same $I_D$, $W/L$, and $V_{OV}$**, a PMOS has a lower $g_m$; to match NMOS $g_m$, PMOS devices need larger $W/L$.\n- **Body terminal**: In a typical n-well process, the PMOS body (n-well) is tied to $V_{DD}$. Thus $V_{SB} = V_S - V_{DD}$ is often zero if the source is at $V_{DD}$, which means $g_{mb} = 0$ for common PMOS current sources. NMOS bodies are usually tied to ground, so $V_{SB} \\neq 0$ if the source is not at ground.\n\n---\n\n### 4. Capacitances\nThe capacitance expressions are the same:\n- $C_{gs} \\approx \\frac{2}{3}WLC_{ox} + C_{ov}$\n- $C_{gd} = C_{ov}$\n- $C_{db} = C_j$\n\nOnly the process parameters (oxide thickness, junction areas) differ.\n\n---\n\n### Bottom line\nFor AC small-signal analysis, **you use the exact same model topology for PMOS and NMOS**. Just be careful with definitions:\n- Use **$v_{sg}$** (or handle the sign of $v_{gs}$) for PMOS.\n- Orient the controlled current source consistently with your chosen current direction convention.\n- Remember that $\\mu_p < \\mu_n$, so $g_m$ per unit width/current is smaller for PMOS unless sized accordingly.\n\nThus, they are **isomorphic**, not literally “identical drawings” if you blindly copy the NMOS schematic without flipping the control voltage or current arrow.",
        "format": "markdown",
        "sha256": "c35c46410a06c0d3d5c293c3e9eed57fdca14cea6019fd708db58d89fb810738"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity and current-direction conventions reversed, which earns full credit.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 10641,
        "total_tokens": 10675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 10641,
        "total_tokens": 10675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is: **yes—the topology is the same, but you have to be careful with sign conventions because the PMOS DC current flows opposite to the NMOS current.**\n\nIf you define the small-signal variables consistently for both devices\n\n* \\(v_{gs}=v_G-v_S\\)\n* \\(i_d\\) = small-signal current **entering** the drain\n* \\(v_{ds}=v_D-v_S\\)\n\nthen the linearized (small-signal) two-port equations are **identical**:\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o} \\quad (+ \\; g_{mb}v_{bs} \\text{ if body is not tied to source})\n\\]\n\nThe only difference is the numerical value of the parameters, which use PMOS quantities:\n\n\\[\ng_m = \\mu_p C_{ox}(V_{SG}-|V_{thp}|), \\qquad r_o = \\frac{1}{\\lambda_p I_D}\n\\]\n\n---\n\n### Why it looks like a “mirror” in most textbooks\n\nBecause the PMOS transistor conducts from **source to drain** (conventional current \\(S\\!\\to\\!D\\)), most analog texts prefer to define the control voltage as\n\n\\[\nv_{sg} = v_S - v_G = -v_{gs}\n\\]\n\nand draw the controlled source pointing **\\(S\\!\\to\\!D\\)** with value \\(g_m v_{sg}\\). In that convention the schematic is a vertical mirror of the NMOS model:\n\n| | NMOS | PMOS (common convention) |\n|---|---|---|\n| **Control voltage** | \\(v_{gs}\\) | \\(v_{sg}\\) |\n| **Current-source direction** | \\(D \\!\\to\\! S\\) | \\(S \\!\\to\\! D\\) |\n| **DC current** | enters drain (\\(>0\\)) | enters source / leaves drain (\\(<0\\) magnitude) |\n| **\\(g_m\\)** | \\(\\mu_n C_{ox}V_{OV}\\) | \\(\\mu_p C_{ox}V_{OV}\\) |\n| **\\(r_o\\)** | \\(1/(\\lambda_n I_D)\\) | \\(1/(\\lambda_p I_D)\\) |\n\nSo if you literally swap \\(D\\leftrightarrow S\\) and replace \\(v_{gs}\\) with \\(v_{sg}\\), you get the PMOS diagram.\n\n---\n\n### The full small-signal model (both devices)\n\nBoth have the same elements connected to the same terminals:\n\n* **Gate:** open circuit (\\(i_g=0\\)) at low frequency; capacitances \\(C_{gs}\\) and \\(C_{gd}\\) to source/drain.\n* **Drain–Source:** voltage-controlled current source \\(g_m v_{gs}\\) (or \\(g_m v_{sg}\\)) in parallel with output resistance \\(r_o\\).\n* **Body:** if the body is tied to the source (standard for PMOS in n-well), \\(v_{bs}=0\\) and the body-effect source \\(g_{mb}v_{bs}\\) disappears. If not, it is added just like in NMOS.\n* **Parasitics:** \\(C_{db}\\) (or \\(C_{sb}\\)) to body.\n\n---\n\n### Bottom line\n\n* **Structurally / topologically:** identical.\n* **Mathematically:** identical if you keep \\(v_{gs}\\) and \\(i_d\\) defined with the same reference directions.\n* **Graphically / intuitively:** usually drawn as a mirror image because designers prefer to use \\(v_{sg}\\) and point the source \\(S\\!\\to\\!D\\).\n\nIn AC analysis (gain stages, common-source, common-gate, etc.) you can use the **same small-signal equations and the same model topology** for PMOS; just substitute the PMOS \\(g_m\\), \\(r_o\\), and capacitance values, and pay attention to whether your controlling voltage is \\(v_{gs}\\) or \\(v_{sg}\\).",
        "format": "markdown",
        "sha256": "92c4bcae9b4bbdc7d17b55eaae2b1dcb5b48b2611fc8b95e776be20a7d841bef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS small-signal model is the same in form as the NMOS model with consistent reference directions, and notes the polarity/sign-convention differences. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 33880,
        "total_tokens": 33914,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 33880,
        "total_tokens": 33914,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **Yes, essentially identical in topology and form**, but you must be careful with the sign convention for the controlling voltage and the direction of the controlled current source.\n\n### 1. The common structure\nFor both NMOS and PMOS in saturation, the small-signal (hybrid-π) model is the same:\n\n- **Gate:** Open circuit (infinite input resistance, \\(i_g=0\\)).\n- **Drain–Source:** A voltage-controlled current source \\(g_m v_{gs}\\) (or \\(v_{sg}\\)) in parallel with the output resistance \\(r_o\\).\n- **Body:** If the body (bulk) is not at the source potential, a second source \\(g_{mb}v_{bs}\\) is added.\n\nThe parameters have analogous expressions (using the appropriate mobility \\(\\mu_n\\) or \\(\\mu_p\\) and overdrive \\(V_{OV}\\)):\n\n\\[\ng_m = \\mu C_{ox}\\frac{W}{L}V_{OV}, \\qquad\nr_o = \\frac{1}{\\lambda I_D}\n\\]\n\nwhere \\(I_D\\) is the **magnitude** of the DC drain current.\n\n---\n\n### 2. Where the signs differ\n\nThe difference is purely convention, not physics.\n\n| | **NMOS** | **PMOS** |\n|---|---|---|\n| **DC current direction** | \\(I_D\\) flows **D → S** | \\(I_D\\) flows **S → D** |\n| **Overdrive** | \\(V_{OV}=V_{GS}-V_{thn}\\) | \\(V_{OV}=V_{SG}-\\|V_{thp}\\|\\) |\n| **Controlling voltage (natural)** | \\(v_{gs}=v_g-v_s\\) | \\(v_{sg}=v_s-v_g\\) |\n| **Small-signal equation** | \\(i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\\) | \\(i_d = g_m v_{sg} + \\frac{v_{sd}}{r_o}\\) |\n| **Arrow of VCCS** | Points **D → S** (down) | Points **S → D** (up) |\n\nIf you insist on using **one** definition—say \\(v_{gs}\\equiv v_g-v_s\\) for **both** devices—then for PMOS an increase in \\(v_g\\) (with source fixed) *turns the device off*, so:\n\n\\[\ni_d = -g_m v_{gs} \\quad (\\text{PMOS, unified } v_{gs}\\text{ convention})\n\\]\n\nThus the current source arrow is **reversed** compared with NMOS. But if you draw the PMOS with its source at the top and label the controlling voltage \\(v_{sg}\\), the schematic is **exactly** the same as an NMOS drawn with source at the bottom.\n\n---\n\n### 3. So are they “identical”?\n\n- **Topologically:** Yes. Same components (\\(g_m\\), \\(r_o\\), \\(g_{mb}\\) if needed), same infinite gate impedance.\n- **Quantitatively:** The formulas are identical in form; just substitute \\(\\mu_p\\) for \\(\\mu_n\\) and use \\(V_{SG}\\) instead of \\(V_{GS}\\).\n- **Graphically:** They are mirror images. If you flip a PMOS vertically (swap the roles of D and S in the drawing), its small-signal model overlays an NMOS perfectly.\n\n### 4. Practical bottom line\nAnalog designers treat them as the **same model**. When analyzing a PMOS stage (e.g., a common-source PMOS or a current mirror), you simply write:\n\n\\[\ng_m = \\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG}-|V_{thp}|)\n\\]\n\nand use the same small-signal circuit—just remember that the controlled source points **from source to drain** (or use \\(v_{sg}=-v_{gs}\\) and keep the arrow pointing D→S with a minus sign).\n\n**Exception:** The body-effect coefficient \\(g_{mb}\\) is present only when \\(V_{SB}\\neq 0\\). For a typical PMOS in an n-well process, the body is tied to \\(V_{DD}\\) (the source), so \\(g_{mb}=0\\); for an NMOS with source not at ground, \\(g_{mb}\\neq 0\\). That is a circuit-bias issue, not a difference in the device model itself.",
        "format": "markdown",
        "sha256": "9e6a488d140eb13e76b40648b9d146ee137d5f3c43d61a020e73853b4299ee92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model and notes the sign and polarity conventions, satisfying the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 12497,
        "total_tokens": 12531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 34,
        "output_tokens": 12497,
        "total_tokens": 12531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10215,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the figure, **M1 is an n‑channel enhancement MOSFET** (arrow on substrate points inward toward the channel). Its connections are:\n\n* **Drain (D)** → top node (call it node 1, where $V_X$ is applied)  \n* **Gate (G)** → tied directly to node 1 (diode connection)  \n* **Source (S)** → ground  \n* **Substrate (B)** → ground (same node as source)\n\nSo the transistor is **diode‑connected**:\n\n$$V_{GS}=V_{DS}=V_X$$\n\nBecause $I_G=0$, the current $I_X$ shown by the arrow is exactly the drain current $I_D$ entering the port.\n\n---\n\n### 1.  Operating regions (for $V_X\\ge 0$)\n\n| Region | Condition on $V_X$ | $I_D$ expression |\n|--------|-------------------|------------------|\n| **Cutoff** | $0 \\le V_X < V_{th}$ | $I_X = 0$ |\n| **Saturation** | $V_X \\ge V_{th}$ | $V_{DS}\\ge V_{GS}-V_{th}$ is satisfied because $V_{GS}=V_{DS}$. <br> $I_X = \\dfrac{1}{2}k_n(V_X-V_{th})^2$  <br> where $k_n=\\mu_n C_{ox}(W/L)$. |\n\n*At $V_X=V_{th}$ the current is zero and the slope $\\frac{dI_X}{dV_X}=k_n(V_X-V_{th})=0$, so the curve leaves the axis with a horizontal tangent.*\n\nFor completeness, if $V_X$ is swept negative:\n* For $-V_D \\lesssim V_X < 0$ ($V_D\\approx 0.7$ V) the body diode (substrate–drain) is reverse biased → $I_X=0$.\n* For $V_X \\lesssim -0.7$ V the body diode conducts exponentially: $I_X<0$ (current leaves the port).\n\n---\n\n### 2.  Sketch of $I_X$ versus $V_X$\n\nThe qualitative plot is shown below.\n\n```\nIx\n  |\n  |                    saturation:\n  |                    I = (kn/2)(Vx-Vth)²\n  |                      /\n  |                     /\n  |                    /\n  |                   /\n  |                  /\n  |                 /\n  |                /\n  |               /\n  |              /\n  |             /\n  |            /\n  |           /\n  |          /\n  |         /\n  |        /\n  |_______/____________________ Vx\n         Vth\n  |\n  |← zero for 0 ≤ Vx < Vth\n```\n\n**Key features of the curve**\n\n* **Zero** along the axis from $V_X=0$ up to $V_X=V_{th}$.\n* At $V_X=V_{th}$ the transistor turns on; $I_X$ begins to rise as a **parabola**.\n* The current is always non‑negative for $V_X\\ge 0$ because the device is passive (it dissipates power).\n\nIf you prefer a numeric feel: for $V_X \\gg V_{th}$, $I_X \\propto (V_X-V_{th})^2$.\n\n---\n\n**Summary equation (positive branch)**\n\n$$\nI_X = \n\\begin{cases}\n0, & V_X < V_{th} \\\\[6pt]\n\\dfrac{k_n}{2}\\left(V_X - V_{th}\\right)^2, & V_X \\ge V_{th}\n\\end{cases}\n$$\n\nThat is the required $I_X$–$V_X$ characteristic: a “dead” region below threshold followed by a square‑law rise, exactly the behavior of a diode‑connected NMOS load/transistor.",
        "format": "markdown",
        "sha256": "e17e749cc14d3ef424b73924545d7c778fea3f5f70d5f64d5760b3ec6d39f446"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives zero current up to threshold followed by a quadratic rise in saturation. The negative-voltage discussion is secondary and broadly consistent; the summary equation's unqualified below-threshold branch does not change the correct positive-voltage answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1328,
        "output_tokens": 20622,
        "total_tokens": 21950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1328,
        "output_tokens": 20622,
        "total_tokens": 21950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the figure, **M₁ is an NMOS transistor connected in diode configuration** (its gate is shorted to its drain) with the source grounded. The external source **Vₓ** is applied to the drain/gate node, and **Iₓ** is defined as the current entering that node from Vₓ (flowing left).\n\n---\n\n### Step‑by‑step analysis\n\n| Region of Vₓ | Condition on M₁ | What happens? | Iₓ |\n|---|---|---|---|\n| **Vₓ < Vₜₙ** (threshold, Vₜₙ > 0) | Cutoff: V_GS = Vₓ < Vₜₙ | No channel forms; transistor is open. | **Iₓ = 0** |\n| **Vₓ ≥ Vₜₙ** | Saturation: V_DS = V_GS = Vₓ and Vₓ ≥ Vₓ – Vₜₙ (always true) | Channel forms; device operates in saturation because V_DS ≥ V_GS – Vₜₙ. | **Square‑law**:  <br> Iₓ = ½ kₙ(W/L)(Vₓ – Vₜₙ)² |\n\n*Note:* Because V_DS = V_GS, M₁ **never enters triode** (as long as it is on). Channel‑length modulation (λ) can be ignored for a qualitative sketch or included as a mild upward curvature.\n\n---\n\n### Sketch of Iₓ versus Vₓ\n\n```\nIₓ\n│\n│          ╱  Quadratic rise\n│         ╱   Iₓ = ½kₙ(W/L)(Vₓ−Vₜₙ)²\n│        ╱\n│       ╱\n│      ╱\n│     ╱\n│    ╱\n│   ╱\n│  ╱\n│ ╱\n│╱_________________________ Vₓ\n│         │\n│        Vₜₙ\n│\n└─ Zero for Vₓ < Vₜₙ (cutoff)\n```\n\n**Key features of the curve:**\n\n1. **Flat at zero** for all Vₓ below Vₜₙ (cutoff region).\n2. **Starts at (Vₜₙ, 0)** with zero slope (since dIₓ/dVₓ = kₙ(W/L)(Vₓ – Vₜₙ) → 0 at Vₓ = Vₜₙ).\n3. **Rises quadratically** for Vₓ > Vₜₙ, following the long‑channel MOSFET square law.\n\nIf you include the body diode (parasitic drain–substrate diode), for **Vₓ < –0.7 V** the diode would conduct and Iₓ would become negative (current flows out of the node into Vₓ), but the **transistor‑action sketch** above is what the problem asks for.\n\n---\n\n**Bottom line:** The Iₓ–Vₓ characteristic is that of a **nonlinear “square‑law” resistor**: off until Vₜₙ, then a parabola opening upward.",
        "format": "markdown",
        "sha256": "f5c8e6a3784cd4eb1547cf10e1524a2f38608de94e41421c27019af2ed5921d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation above threshold, and the quadratic rise in current; the negative-voltage body-diode note is also consistent and optional.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 15064,
        "total_tokens": 16392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 15064,
        "total_tokens": 16392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the figure, transistor **M₁** is **diode‑connected**: its **gate is shorted to its drain** (the loop on the left routes the gate terminal back to the upper node), its **source is grounded**, and the test source **Vₓ** is applied across drain–source.  \nThus for this NMOS (threshold **Vₜₙ**, transconductance parameter **kₙ = μₙCₒₓW/L**):\n\n\\[\nV_{GS}=V_{DS}=V_X ,\\qquad I_X = I_D\n\\]\n\nBecause \\(V_{GS}-V_{tn}=V_X-V_{tn}\\) and \\(V_{DS}\\ge V_{GS}-V_{tn}\\) always holds for \\(V_X\\ge V_{tn}\\), **M₁ is always in saturation** whenever it is on.\n\n---\n\n### DC I–V relationship\n\n| Region | Condition on \\(V_X\\) | Current \\(I_X\\) |\n|--------|----------------------|-----------------|\n| **Cutoff** | \\(V_X < V_{tn}\\) | \\(I_X = 0\\) |\n| **Saturation** | \\(V_X \\ge V_{tn}\\) | \\(I_X = \\dfrac{1}{2}k_n\\,(V_X-V_{tn})^2\\) |\n\n*(If the body diode of the NMOS is taken into account for negative \\(V_X\\): when \\(V_X < -V_D \\approx -0.7\\;\\text{V}\\) the source‑to‑drain parasitic diode turns on and \\(I_X\\) becomes a large negative diode current.)*\n\n---\n\n### Sketch of \\(I_X\\) vs. \\(V_X\\)\n\n- **Horizontal axis:** \\(V_X\\) (test voltage).\n- **Vertical axis:** \\(I_X\\) (positive = leftward, i.e. current drawn from \\(V_X\\)).\n\n```\n      I_X\n       |\n       |           .  (parabolic rise)\n       |          /|\n       |         / |\n       |        /  |\n       |       /   |\n       |      /    |\n       |_____/_____|________ V_X\n            V_tn\n```\n\n**Key features to draw:**\n\n1. **Zero current** along the axis for \\(V_X < V_{tn}\\) (cutoff).\n2. At **\\(V_X = V_{tn}\\)** the transistor turns on; \\(I_X = 0\\) but the slope \\(\\frac{dI_X}{dV_X}\\) jumps to zero (actually the derivative of the parabola at the origin is zero, so it starts flat).\n3. For **\\(V_X > V_{tn}\\)** the current follows a **square‑law (parabolic)** curve:\n   \\[\n   I_X \\propto (V_X - V_{tn})^2\n   \\]\n4. (Optional) For **\\(V_X < 0\\)**: stay at \\(I_X\\approx 0\\) until \\(V_X \\approx -0.7\\;\\text{V}\\), then drop sharply into negative values as the body diode conducts.\n\nSo the curve is **flat (zero) until the threshold, then curves upward quadratically**—the classic diode‑connected MOSFET characteristic.",
        "format": "markdown",
        "sha256": "4b39f54af4aaaef50ea2aaefabe80040bd940d83e9bfba2abefb6375ff24b62a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current below threshold with a quadratic rise above it. The optional negative-voltage body-diode note does not affect the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 19629,
        "total_tokens": 20957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 19629,
        "total_tokens": 20957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit set‑up**\n\n* The left source is the control voltage: \\(V_{GS}=V_X\\) (because the source terminal of \\(M_1\\) is grounded).\n* The right source fixes the drain node: \\(V_D = 1\\;\\text{V}\\), so \\(V_{DS}=1\\;\\text{V}\\).\n* The arrow \\(I_X\\) points left, i.e. it measures the **drain current** entering \\(M_1\\) (conventional current \\(I_D\\)).\n* \\(M_1\\) is an **n‑channel MOSFET** (label \\(M_1\\), arrow on the source/substrate pointing toward the channel).\n\nSo we are simply plotting the transistor transfer characteristic at a fixed \\(V_{DS}=1\\) V:\n\n\\[\nI_X = I_D(V_{GS}=V_X),\\qquad V_{DS}=1\\;\\text{V}.\n\\]\n\n---\n\n### 1.  Operating regions (symbolic)\n\nLet\n\n* \\(V_{th}\\) = threshold voltage,\n* \\(k_n = \\mu_nC_{ox}(W/L)\\).\n\n| Region | Condition on \\(V_X\\) | Expression for \\(I_X\\) |\n|--------|----------------------|------------------------|\n| **Cutoff** | \\(V_X < V_{th}\\) | \\(I_X = 0\\) |\n| **Saturation** | \\(V_{th} \\le V_X \\le V_{th}+1\\) | \\(I_X=\\dfrac{k_n}{2}(V_X-V_{th})^2\\) |\n| **Triode (linear)** | \\(V_X \\ge V_{th}+1\\) | \\(I_X=k_n\\!\\left[(V_X-V_{th})(1)-\\frac{1^2}{2}\\right]\\) |\n\nThe boundary between saturation and triode occurs when\n\n\\[\nV_{DS}=V_{GS}-V_{th}\\;\\;\\Rightarrow\\;\\;V_X = V_{th}+1\\;\\text{V}.\n\\]\n\nAt that point\n\n\\[\nI_X = \\frac{k_n}{2}(1)^2 = \\frac{k_n}{2}.\n\\]\n\n**Important shape facts**\n\n* At \\(V_X=V_{th}\\) the curve leaves the axis with **zero slope** (\\(dI/dV_X=0\\)).\n* It is a **parabola** (concave up) until \\(V_X=V_{th}+1\\) V.\n* The derivative is continuous: at the boundary \\(dI/dV_X=k_n\\).\n* For larger \\(V_X\\) it becomes a **straight line** of slope \\(k_n\\).\n\n---\n\n### 2.  Qualitative sketch of \\(I_X\\) vs. \\(V_X\\)\n\n```\nI_X\n  |\n  |                         /\n  |                        /   Triode  (linear)\n  |                       /\n  |                      /\n  |                     .\n  |                    /|\n  |                   / |   Saturation (parabolic)\n  |                  /  |\n  |                 /   |\n  |                /    |\n  |_______________/_____|_____________ V_X\n         V_th   V_th+1V\n  (I_X = 0 for V_X < V_th)\n```\n\n* **Left of \\(V_{th}\\):** \\(I_X\\) stays on the horizontal axis (transistor off).\n* **From \\(V_{th}\\) to \\(V_{th}+1\\) V:** quadratic rise; tangent is horizontal at \\(V_{th}\\).\n* **Beyond \\(V_{th}+1\\) V:** straight line continuing upward with constant slope \\(k_n\\).\n\nIf concrete numbers are given (for example \\(V_{th}=0.5\\) V and \\(k_n=1\\;\\text{mA/V}^2\\)), the “kink” is at \\(V_X=1.5\\) V and \\(I_X=0.5\\) mA, and the linear part has slope 1 mA/V.\n\n---\n\n### 3.  One‑line summary\n\n> **\\(I_X\\) is zero until \\(V_X\\) reaches \\(V_{th}\\); then it grows quadratically in saturation until \\(V_X=V_{th}+1\\) V; above that it increases linearly with \\(V_X\\) because the transistor enters the triode region with \\(V_{DS}\\) fixed at 1 V.**\n\nThat is the required \\(I_X\\)–versus–\\(V_X\\) plot for the shown circuit.",
        "format": "markdown",
        "sha256": "201709a1121e950fe8e66dd4c739d9f5ca0c66a258c111f39016cfa10ef57634"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the fixed VDS = 1 V, the quadratic saturation-region rise from Vth to Vth + 1 V, and the roughly linear triode-region rise beyond that boundary.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1485,
        "output_tokens": 18242,
        "total_tokens": 19727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1485,
        "output_tokens": 18242,
        "total_tokens": 19727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\n* $M_1$ is an **n‑channel enhancement MOSFET** (the gap between gate and channel means $V_{th}>0$).  \n* **Gate** $\\rightarrow$ driven by the DC source $V_X$  $\\;\\Rightarrow\\; V_{GS}=V_X$.  \n* **Drain** $\\rightarrow$ tied to the $+1\\;\\text{V}$ source $\\;\\Rightarrow\\; V_D=1\\;\\text{V}$.  \n* **Source** $\\rightarrow$ grounded $\\;\\Rightarrow\\; V_S=0$.  \n* Hence $V_{DS}=V_D-V_S=1\\;\\text{V}$ always.  \n* The arrow $I_X$ points left on the top wire, so $I_X$ is the **drain current** $I_D$ entering the drain.\n\nBecause $V_{DS}$ is fixed, as $V_X$ is swept the transistor moves through the three standard regions.\n\n---\n\n### 1.  Region analysis (symbolic: threshold $V_{th}$, parameter $k_n$)\n\n| Region | Condition on $V_X$ | Current $I_X$ |\n|--------|-------------------|---------------|\n| **Cutoff** | $V_X < V_{th}$ | $I_X = 0$ |\n| **Saturation** | $V_{th} \\le V_X \\le V_{th}+1\\;\\text{V}$ | $I_X = \\dfrac{k_n}{2}\\bigl(V_X-V_{th}\\bigr)^2$ |\n| **Triode (linear)** | $V_X > V_{th}+1\\;\\text{V}$ | $I_X = k_n\\Bigl[\\bigl(V_X-V_{th}\\bigr)(1)-\\dfrac{1^2}{2}\\Bigr]$ |\n\n*Boundary:* at $V_X = V_{th}+1\\;\\text{V}$ we have $V_{GS}-V_{th}=V_{DS}$.  \nThe current there is $I_X = \\tfrac{k_n}{2}(1)^2 = k_n/2$, and the slope $\\mathrm d I_X/\\mathrm dV_X$ is continuous ($=k_n$) at that point.\n\n---\n\n### 2.  What the plot looks like\n\n* **Horizontal axis:** $V_X$  \n* **Vertical axis:** $I_X$ (positive = current flowing left/down through $M_1$)\n\n1. **Zero** until $V_X$ reaches $V_{th}$.  \n2. **Parabolic rise** in saturation (starts with zero slope at $V_{th}$).  \n3. At $V_X = V_{th}+1\\;\\text{V}$ the parabola meets a **straight line** (triode region) with constant slope $k_n$.\n\nBelow is a qualitative sketch (the exact scale is set by $k_n$ and $V_{th}$).\n\n```\nI_X\n  |\n  |                        /\n  |                       /  Triode (linear)\n  |                      /\n  |                     /\n  |                    /\n  |                   /\n  |                  /  Saturation (parabolic)\n  |                 .\n  |                .\n  |               .\n  |              .\n  |_____________.________________ V_X\n               V_th   V_th+1V\n```\n\n*Key points to label on your drawing:*\n\n* $V_X = V_{th}$  $\\rightarrow$ $I_X=0$ (turn‑on).\n* $V_X = V_{th}+1\\;\\text{V}$  $\\rightarrow$ $I_X = k_n/2$ (saturation $\\leftrightarrow$ triode edge).\n* For $V_X > V_{th}+1\\;\\text{V}$: $I_X$ increases **linearly** with $V_X$ because $V_{DS}$ is held constant at 1 V.\n\n---\n\n### 3.  Quick concrete example (optional)\n\nIf, for instance, $V_{th}=0.5\\;\\text{V}$ and $k_n=2\\;\\text{mA/V}^2$:\n\n* Cutoff for $V_X<0.5\\;\\text{V}$.\n* At $V_X=1.5\\;\\text{V}$ ($=V_{th}+1$V): $I_X = 1\\;\\text{mA}$.\n* Beyond $1.5\\;\\text{V}$: $I_X = 2(V_X-0.5)-1$ [mA], a line of slope $2$ mA/V.\n\n---\n\n**Bottom line:**  \nSketch $I_X$ versus $V_X$ as **zero** below $V_{th}$, a **parabolic** segment up to $V_{th}+1\\;\\text{V}$, then a **straight line** thereafter. That is the DC transfer characteristic of the given NMOS with a fixed $V_{DS}=1\\;\\text{V}$.",
        "format": "markdown",
        "sha256": "e49e4204078a52d142f8a11038ef35340a97c1ba6932ae597ac55f8cec2e2bd0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the fixed 1 V drain-source bias and gives the expected zero-below-threshold, quadratic saturation rise up to Vth + 1 V, and roughly linear triode rise beyond it.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 16688,
        "total_tokens": 18173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 16688,
        "total_tokens": 18173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\n- **M₁** is an **n‑channel enhancement MOSFET** (arrow on the source points **inward** toward the channel).  \n- The **gate** is driven by the independent DC source **Vₓ** (so \\(v_{GS}=V_x\\)).  \n- The **source** is grounded (\\(v_S=0\\)).  \n- The **drain** is tied through the 1 V source to ground, therefore  \n  \\[\n  v_{DS}=1\\;\\text{V}-0=1\\;\\text{V}.\n  \\]\n- By KCL at the drain node the arrow current **Iₓ** is exactly the drain current:\n  \\[\n  I_x = i_D .\n  \\]\n\nBecause **V_DS is held constant at 1 V**, varying Vₓ changes only \\(v_{GS}\\).  \nUsing the long‑channel model (\\(V_{th}>0\\), transconductance \\(k_n\\)):\n\n| Region | Condition on \\(V_x\\) | Expression for \\(I_x\\) |\n|--------|----------------------|------------------------|\n| **Cutoff** | \\(V_x < V_{th}\\) | \\(I_x = 0\\) |\n| **Saturation** | \\(V_{th} \\le V_x \\le V_{th}+1\\) V | \\(I_x=\\frac{k_n}{2}(V_x-V_{th})^2\\) |\n| **Triode (linear)** | \\(V_x \\ge V_{th}+1\\) V | \\(I_x=k_n\\big[(V_x-V_{th})(1)-\\tfrac12\\big]\\) |\n\nThe boundary between saturation and triode occurs when\n\\[\nv_{DS}=v_{GS}-V_{th}\\;\\;\\Rightarrow\\;\\;V_x = V_{th}+1\\;\\text{V}.\n\\]\n\n---\n\n### Sketch of \\(I_x\\) versus \\(V_x\\)\n\nBelow is a **qualitative** plot (the exact curvature depends on \\(V_{th}\\) and \\(k_n\\); the breakpoints are fixed by the 1 V supply).\n\n```\nI_x\n |\n |                      /  linear (triode)\n |                     /\n |                    /\n |                   /\n |                  /  quadratic (saturation)\n |                 /\n |                /\n |               /\n |              /\n |_____________/_________________\n 0           V_th    V_th+1 V    V_x\n            (turn‑on) (edge of sat.)\n```\n\n**How to draw it step by step**\n\n1. **Cutoff:** For all \\(V_x < V_{th}\\) the transistor is off → **\\(I_x=0\\)** along the axis.\n2. **Turn‑on:** At \\(V_x=V_{th}\\), \\(I_x=0\\) and the slope is zero.\n3. **Saturation:** As \\(V_x\\) increases above \\(V_{th}\\), \\(I_x\\) grows **parabolically**:\n   \\[\n   I_x=\\frac{k_n}{2}(V_x-V_{th})^2 .\n   \\]\n4. **Edge of saturation:** At \\(V_x=V_{th}+1\\) V,\n   \\[\n   I_x=\\frac{k_n}{2}(1)^2=\\frac{k_n}{2}.\n   \\]\n5. **Triode:** For larger \\(V_x\\) the device enters the linear region; because \\(v_{DS}=1\\) V is now *smaller* than \\(v_{GS}-V_{th}\\), \\(I_x\\) becomes a **straight line** with slope \\(k_n\\):\n   \\[\n   I_x = k_n(V_x-V_{th})-\\frac{k_n}{2}.\n   \\]\n   The parabola and the line meet smoothly at the boundary (matching value and derivative).\n\n---\n\n### Representative numeric example (just to fix the shape)\n\nIf, for illustration, \\(V_{th}=0.5\\) V and \\(k_n=1\\;\\text{mA/V}^2\\):\n\n| \\(V_x\\) (V) | Region | \\(I_x\\) (mA) |\n|-------------|--------|--------------|\n| 0.3 | Cutoff | 0 |\n| 0.5 | Edge of cutoff | 0 |\n| 1.0 | Saturation | 0.125 |\n| 1.5 | Edge (\\(V_{th}+1\\)) | 0.50 |\n| 2.0 | Triode | 1.00 |\n| 2.5 | Triode | 1.50 |\n\nPlotting these points gives exactly the “zero → parabola → straight line” shape shown above.\n\n---\n\n**Bottom line:**  \n\\(I_x\\) is zero until the gate reaches the threshold; then it follows a square‑law rise (saturation) until \\(V_x = V_{th}+1\\) V, after which it increases linearly with \\(V_x\\) because the transistor is in the triode region with a constant 1 V drain‑to‑source voltage.",
        "format": "markdown",
        "sha256": "7ee48776552913e1cf9c71605592e65ce78ad100da0ea55723f4af530b8a14da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the fixed 1 V drain-source voltage, gives the quadratic saturation rise from threshold to Vth+1 V, and the roughly linear triode rise beyond it, matching the full-credit rule.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 18786,
        "total_tokens": 20271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17406,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 18786,
        "total_tokens": 20271,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17406,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: No.**  \nThe two‑terminal device shown is a **diode‑connected NMOS transistor** (gate shorted to drain, source and substrate grounded). It does **not** behave like a current source; it behaves like a **nonlinear resistor / diode** with a small incremental resistance of roughly **1/gₘ**.\n\n---\n\n### 1. What the figure actually is\n\n| Terminal | Connection |\n|----------|------------|\n| **Drain (D)** | Top node = the point where the test current **Iₓ** enters |\n| **Gate (G)** | Shorted to D by the horizontal wire (the “diode” connection) |\n| **Source (S)** | Ground |\n| **Body (B)** | Ground (separate terminal, shown by the second ground symbol) |\n| **M₁** | NMOS (arrow on the body/substrate points toward the channel) |\n\nSo for DC:\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nBecause the gate is tied to the drain, the transistor **cannot** have an independent, fixed \\(V_{GS}\\) that would set a constant drain current regardless of \\(V_{DS}\\).\n\n---\n\n### 2. DC behavior (square‑law)\n\nAssuming the transistor is in saturation (\\(V_{DS}\\ge V_{GS}-V_{th}\\), which here is always true because \\(V_{DS}=V_{GS}\\)):\n\n\\[\nI_X = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_X-V_{th})^2(1+\\lambda V_X)\n\\]\n\nThus **\\(V_X\\) is determined by \\(I_X\\)** via a quadratic (diode‑like) relationship.  \nIf you force a current \\(I_X\\), the node voltage \\(V_X\\) simply adjusts to satisfy the above equation.\n\n---\n\n### 3. Why it is **not** a current source\n\nA good current source must deliver (or sink) a **constant current** even when the voltage across its terminals changes; i.e. it needs a **very high output resistance** (\\(r_{out}\\to\\infty\\)).\n\nFor this diode‑connected device, look at the small‑signal resistance seen at node \\(X\\):\n\n\\[\nr_{out} = \\left.\\frac{v_x}{i_x}\\right|_{v_{gs}=v_{ds}=v_x}\n      = \\frac{1}{g_m} \\parallel r_o\n      \\approx \\frac{1}{g_m}\n\\]\n\nBecause \\(g_m\\) is typically large (millisiemens), \\(r_{out}\\) is small—often only **tens to a few hundred ohms**.\n\n| Property | Diode‑connected M₁ | Ideal current source |\n|----------|-------------------|----------------------|\n| \\(I\\) vs \\(V\\) | \\(I \\propto (V-V_{th})^2\\) (diode) | \\(I = \\text{const}\\) |\n| Output resistance | \\(\\approx 1/g_m\\) (low) | \\(\\infty\\) (very high) |\n| Role in circuits | **Voltage‑to‑current converter**; generates reference \\(V_{GS}\\) | Supplies constant current to a load |\n\nSo if you try to use this two‑terminal block as a current source feeding a load, any change in load voltage changes \\(V_X\\), which in turn changes the current because \\(I_X\\) is tightly coupled to \\(V_X\\) through \\(g_m\\).\n\n---\n\n### 4. What it is actually good for\n\nThis exact configuration is the **reference branch** of a **current mirror**:\n\n* The forced current \\(I_X\\) (from an ideal current source or a resistor) creates a well‑defined \\(V_{GS}\\).\n* That same \\(V_{GS}\\) is applied to a **second** transistor (the output device of the mirror).\n* The second transistor has its drain connected to the load, so its \\(V_{DS}\\) can vary while \\(V_{GS}\\) stays fixed; **that** transistor acts as the true current source with high output resistance \\(r_o\\).\n\n---\n\n### 5. Edge case: if it were *not* diode‑connected\n\nIf the figure instead showed \\(V_{GS}=0\\) (gate and source both grounded, no diode link) with an **enhancement** NMOS, the device would simply be **cut off** (\\(I_X\\approx 0\\)) and could not support any DC current at all—so it still could not be a current source.\n\n---\n\n## Bottom line\n\nThe device in the figure is a **diode‑connected MOSFET**. Because \\(V_{GS}=V_{DS}\\), its current is set by its terminal voltage via the square law, and its small‑signal resistance is only \\(1/g_m\\). **Therefore it cannot act as a current source; it acts as a diode / voltage‑reference element.** It is used to *generate* the bias voltage \\(V_{GS}\\) for an actual current‑source transistor in a mirror configuration.",
        "format": "markdown",
        "sha256": "5c8e0e00e97dc8754b5ec3f5bafe9b1b0229a514be1935909b33fa2eb3156d14"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly concludes that the diode-connected device is not a current source because its incremental resistance is about 1/gₘ. However, it misidentifies M₁ as an NMOS and reverses the actual terminal connections; the figure shows a PMOS with its source at the top and gate and drain grounded. The golden solution caps this error at 2.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1070,
        "output_tokens": 13092,
        "total_tokens": 14162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1070,
        "output_tokens": 13092,
        "total_tokens": 14162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13568,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the figure, transistor **M₁** is connected with:\n\n- **Drain**: connected to terminal **Iₓ**\n- **Gate**: grounded\n- **Source** (and/or substrate/body): grounded\n\nSo the control voltage is **V_GS = 0 V**.\n\n### Can it act as a current source?\n\nA MOSFET acts as a current source only when it operates in **saturation** with a **fixed, constant V_GS** that gives a stable drain current I_D independent of V_DS.\n\n**For a standard enhancement-mode NMOS (V_th > 0):**\nSince **V_GS = 0 < V_th**, the transistor is in **cutoff**. The drain current is essentially **I_D ≈ 0** (an open circuit), not a constant non-zero current. Thus it **cannot** function as a practical current source.\n\n**Only in the special case of a depletion-mode device (JFET or depletion NMOS with V_th < 0):**\nWith V_GS = 0, the transistor is **on** and delivers **I_D = I_DSS** (a constant current) as long as V_DS ≥ |V_th|. In that specific case, yes—it behaves as a current source/sink.\n\n### Conclusion\n\n**Generally: No.** For the common enhancement-mode NMOS transistor (which \"M₁\" typically denotes), **V_GS = 0** keeps it turned off, so it does **not** act as a current source. To be a current source, M₁ would need a fixed **V_GS > V_th** (for NMOS) so that it operates in saturation with a constant I_D.\n\nIf M₁ were specifically a **depletion-mode** device, then with V_GS = 0 it would indeed provide the constant current **I_DSS** and could serve as a current source.",
        "format": "markdown",
        "sha256": "7351ffbda4ec48f3447bd0d2876dd38327ea118dc500cf4dec3ec838e0439145"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads M1 as an NMOS with its source grounded and concludes it is off at VGS = 0. The actual device is a diode-connected PMOS with low small-signal impedance, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 19435,
        "total_tokens": 20505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 19435,
        "total_tokens": 20505,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the figure, transistor **M₁** is an NMOS device (the arrow on the body/substrate points from p‑type body to n‑type channel) whose **gate** and **source** are both tied to ground. Therefore:\n\n$$V_{GS} = V_G - V_S = 0 - 0 = 0\\ \\text{V}$$\n\nThe terminal labeled **Iₓ** is the **drain** node, so the voltage across the transistor is $V_{DS} = V_X$.\n\n---\n\n### Why it generally **cannot** act as a current source\n\nFor a standard **enhancement‑mode** NMOS transistor (the usual case in modern CMOS), the threshold voltage is positive ($V_{th} > 0$). To operate in saturation and behave like a current source, the device needs:\n\n$$V_{GS} \\ge V_{th} + V_{OV} \\quad (\\text{with } V_{OV} > 0)$$\n\nHere $V_{GS} = 0 < V_{th}$, so **M₁ is in cutoff**:\n\n$$I_D \\approx 0$$\n\n- It cannot deliver any non‑zero current $I_X$.\n- If an external circuit forces $I_X > 0$, the drain voltage $V_X$ will simply rise (until breakdown or until the current finds another path).\n- Thus, as a two‑terminal black box between node $I_X$ and ground, it acts essentially like an **open circuit**, not a current source.\n\n---\n\n### The only exception\n\nIf M₁ were a **depletion‑mode** NMOS ($V_{th} < 0$), then $V_{GS} = 0$ would indeed turn the device on, and for $V_{DS} \\ge -V_{th}$ it would operate in saturation with:\n\n$$I_D \\approx \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(0 - V_{th})^2(1+\\lambda V_{DS})$$\n\nIn that special case it *could* function as a current source (the classic depletion‑load configuration). But for a standard enhancement NMOS, it does **not**.\n\n---\n\n### Bottom line\n\n**No – for a typical enhancement NMOS, the device shown cannot act as a current source because $V_{GS}=0$ keeps it in cutoff ($I_D \\approx 0$).** To serve as a current source, the transistor must be biased with $V_{GS} > V_{th}$ (held constant by a reference circuit) and operated in saturation ($V_{DS} \\ge V_{GS}-V_{th}$).",
        "format": "markdown",
        "sha256": "c2037a79798e30d148edf79345fc6188af58b122996513308e0b8e63d6cbaca7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and reads its terminals as gate/source grounded. Its “no” conclusion rests on cutoff, missing the actual PMOS diode connection and its low impedance (about 1/gm).",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 18456,
        "total_tokens": 19526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1070,
        "output_tokens": 18456,
        "total_tokens": 19526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **single-stage common‑source (CS) MOS amplifier with unbypassed source degeneration**.  \nBecause the resistor labeled $R_S$ is tied to $V_{DD}$ and the load resistor $R_D$ is tied to ground, $M_1$ operates as a **PMOS** transistor:\n\n* **Gate ($G$)**: driven by $V_{\\text{in}}$\n* **Source ($S$)**: connected to $V_{DD}$ through $R_S$\n* **Drain ($D$)**: connected to $V_{\\text{out}}$; $V_{\\text{out}}$ is loaded by $R_D$ to ground\n\nBelow is a complete DC and small‑signal analysis.\n\n---\n\n## 1. DC Operating Point (Bias)\n\nDefine $I_D$ as the drain current (flowing $S \\to D$ for PMOS).  \nNode voltages:\n\n$$\nV_S = V_{DD} - I_D R_S , \\qquad V_D = V_{\\text{out}} = I_D R_D\n$$\n\nThe controlling voltages are:\n\n$$\nV_{SG} = V_S - V_{\\text{in}} = V_{DD} - I_D R_S - V_{\\text{in}}\n$$\n\n$$\nV_{SD} = V_S - V_D = V_{DD} - I_D(R_S+R_D)\n$$\n\n### Saturation condition\nFor PMOS to be in saturation (active region):\n\n$$\nV_{SD} \\ge V_{SG} - |V_{thp}|\n$$\n\nwhere $|V_{thp}|$ is the PMOS threshold magnitude.\n\n### Drain‑current equation\nIgnoring channel‑length modulation ($\\lambda=0$) for simplicity:\n\n$$\nI_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(V_{SG} - |V_{thp}|\\right)^2\n$$\n\nSubstituting $V_{SG}$ gives a quadratic equation for $I_D$ once $V_{\\text{in}}$ (DC) is known.\n\n### Body effect (important here)\nIn a typical n‑well process the PMOS body is tied to $V_{DD}$, so $V_{SB}=V_{DD}-V_S=I_D R_S > 0$.  \nThe threshold therefore increases with $V_{SB}$:\n\n$$\n|V_{thp}| = |V_{thp0}| + \\gamma\\left(\\sqrt{2\\phi_F + V_{SB}} - \\sqrt{2\\phi_F}\\right)\n$$\n\n### Output DC voltage\nOnce $I_D$ is found:\n\n$$\n\\boxed{V_{\\text{out}} = I_D R_D}\n$$\n\n---\n\n## 2. Small‑Signal Model\n\nSet $V_{DD}$ to AC ground. The transistor is modeled by:\n\n* Transconductance: $\\displaystyle g_m = \\frac{\\partial I_D}{\\partial V_{SG}} = \\sqrt{2\\mu_p C_{ox}(W/L)\\,I_D}$\n* Output resistance: $\\displaystyle r_o = \\frac{1}{\\lambda I_D}$ (often $\\infty$ in hand analysis)\n* Body‑effect transconductance: $\\displaystyle g_{mb} = \\frac{\\partial I_D}{\\partial V_{SB}} = \\chi\\,g_m$, with $\\chi \\approx 0.1\\!-\\!0.3$\n\nBecause $V_{DD}$ is AC ground, **both $R_S$ and $R_D$ appear between their nodes and ground**.\n\nThe small‑signal gate voltage is $v_{gs} = v_{\\text{in}} - v_s$, where $v_s$ is the small‑signal voltage at the source node.\n\n### Key nodal relations\nKCL at the source node (current source $g_m v_{gs}$ plus body term $g_{mb}v_{bs}$ flows $S\\!\\to\\!D$; $v_{bs}=-v_s$ because the body is at AC ground):\n\n$$\n(g_m+g_{mb})v_{gs} + \\frac{v_s}{R_S} = 0\n$$\n\nUsing $v_{gs}=v_{\\text{in}}-v_s$ yields:\n\n$$\nv_s = \\frac{(g_m+g_{mb})R_S}{1+(g_m+g_{mb})R_S}\\,v_{\\text{in}}\n\\quad\\Longrightarrow\\quad\nv_{gs} = \\frac{v_{\\text{in}}}{1+(g_m+g_{mb})R_S}\n$$\n\nThe drain current is $i_d = g_m v_{gs}$ (entering the drain with appropriate sign for PMOS). The load $R_D$ converts this to output voltage with inversion:\n\n$$\nv_{\\text{out}} = -i_d R_D = -g_m v_{gs} R_D\n$$\n\n---\n\n## 3. Voltage Gain\n\n$$\n\\boxed{A_v \\equiv \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -\\frac{g_m R_D}{1+(g_m+g_{mb})R_S}}\n$$\n\nIf body effect is neglected ($g_{mb}\\approx 0$, e.g. body tied to source):\n\n$$\n\\boxed{A_v \\approx -\\frac{g_m R_D}{1+g_m R_S}}\n$$\n\n**Interpretation:**\n* **No degeneration ($R_S=0$)**: $A_v = -g_m R_D$ (maximum gain, typical common‑source).\n* **With $R_S>0$**: Gain is reduced by the factor $1/(1+g_m R_S)$ (or $1/(1+(g_m+g_{mb})R_S)$ with body effect).  \n  The resistor introduces **negative feedback**: an increase in $I_D$ lowers $V_S$, which reduces $V_{SG}$ and opposes the change.\n\nIf $r_o$ is finite, the exact expression becomes:\n\n$$\nA_v = -\\frac{g_m R_D}{1+(g_m+g_{mb})R_S}\\;\\frac{r_o}{r_o+\\frac{R_D+R_S}{1+(g_m+g_{mb})R_S}}\n$$\n\nwhich collapses to the formula above as $r_o\\to\\infty$.\n\n---\n\n## 4. Input & Output Resistances\n\n* **Input resistance**: The MOS gate draws zero DC current; small‑signal resistance is infinite:\n  $$\n  \\boxed{R_{\\text{in}} = \\infty}\n  $$\n\n* **Output resistance** (looking into $V_{\\text{out}}$ with $v_{\\text{in}}=0$):\n  The transistor presents a resistance $r_o[1+(g_m+g_{mb})R_S]+R_S$ from drain to ground. In parallel with $R_D$:\n  $$\n  \\boxed{R_{\\text{out}} = R_D \\;\\parallel\\; \\Bigl[r_o\\bigl(1+(g_m+g_{mb})R_S\\bigr)+R_S\\Bigr]}\n  $$\n  For $r_o\\to\\infty$, $R_{\\text{out}} \\approx R_D$.\n\n---\n\n## 5. Role of $R_S$ and Design Trade‑offs\n\n| Feature | Effect of $R_S$ |\n|---|---|\n| **DC bias** | Provides feedback that stabilizes $I_D$ against process/temperature variations ($V_{SG}$ self‑adjusts via $I_D R_S$ drop). |\n| **AC gain** | Reduces gain by factor $\\approx 1/(1+g_m R_S)$. |\n| **Linearity** | Improves linearity (lower distortion) because the effective transconductance is “degenerate”: $\\approx 1/R_S$ for large $g_m R_S$. |\n| **Output resistance** | Raises the intrinsic drain resistance by $\\approx (1+g_m R_S)r_o$. |\n| **Bandwidth** | The source node introduces a pole; if a bypass capacitor is added across $R_S$, AC gain returns to $-g_m R_D$ while DC feedback is preserved. |\n\n---\n\n## 6. Summary\n\nThe circuit is a **PMOS common‑source amplifier with source degeneration $R_S$**.\n\n* **DC**: Solve $I_D$ from $V_{SG}(I_D)$ and $V_{SD}(I_D)$ with the PMOS square‑law; $V_{\\text{out}}=I_D R_D$.\n* **Small‑signal gain**: $\\displaystyle A_v \\approx -\\frac{g_m R_D}{1+g_m R_S}$ (inverted, reduced by $R_S$).\n* **Impedances**: $R_{\\text{in}}=\\infty$, $R_{\\text{out}} \\approx R_D$ (or larger if $r_o$ is included).\n* **Key point**: $R_S$ trades raw gain for **bias stability, linearity, and higher output resistance**—a classic CS degeneration stage.\n\nIf a bypass capacitor is added across $R_S$, the AC gain increases to $-g_m R_D$ while the DC feedback remains; without it, the stage operates as shown with the degraded but more robust gain above.",
        "format": "markdown",
        "sha256": "fc98a665e3fe8df02963cb8fac1d625c5ff7f08c5066b507b4c56985348d90a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain, including the body-effect refinement. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1793,
        "output_tokens": 26708,
        "total_tokens": 28501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20279,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1793,
        "output_tokens": 26708,
        "total_tokens": 28501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20279,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **PMOS common‑source (CS) amplifier with source degeneration**.\n\n* **M₁** is a PMOS transistor (arrow is on the **source** terminal; the source sits at the higher potential, connected to $V_{DD}$ through $R_S$).\n* **$R_S$** is a **source‑degeneration** resistor (between $V_{DD}$ and the source of M₁).\n* **$R_D$** is the **drain load** resistor (between $V_{out}$ and ground).\n* **$V_{in}$** drives the gate.\n* **$V_{out}$** is taken at the drain node.\n\nBecause the DC supply $V_{DD}$ is an AC ground, the small‑signal topology is identical to an NMOS CS stage with source resistor $R_S$ and drain load $R_D$.\n\n---\n\n## 1. DC Operating Point\n\nAssume M₁ operates in **saturation**:\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\left(V_{SG}-|V_{thp}|\\right)^2\\left(1+\\lambda V_{SD}\\right)$$\n\nThe three terminals are linked in a single DC branch:\n* Source voltage: $\\displaystyle V_S = V_{DD} - I_D R_S$\n* Drain / output voltage: $\\displaystyle V_{out} = I_D R_D$\n* Source‑to‑gate: $\\displaystyle V_{SG} = V_S - V_{in} = V_{DD} - I_D R_S - V_{in}$\n* Source‑to‑drain: $\\displaystyle V_{SD} = V_S - V_{out} = V_{DD} - I_D(R_S+R_D)$\n\nSubstituting $V_{SG}$ and $V_{SD}$ into the $I_D$ equation gives a **quadratic** for $I_D$ at a given $V_{in}$.  \nThe transistor is:\n* **Cutoff** when $V_{SG}<|V_{thp}|$  $\\Rightarrow$  $I_D=0$, $V_{out}=0$.\n* **Triode** when $V_{SD}<|V_{thp}|$.\n\nBecause $I_D$ flows through both resistors, the DC transfer is monotonic:\n* **Low $V_{in}$** $\\Rightarrow$ large $V_{SG}$ $\\Rightarrow$ large $I_D$ $\\Rightarrow$ $V_{out}$ is high.\n* **High $V_{in}$** $\\Rightarrow$ small $V_{SG}$ $\\Rightarrow$ $I_D$ drops $\\Rightarrow$ $V_{out}$ falls.\n\n---\n\n## 2. Small‑Signal Model\n\nReplace $V_{DD}$ by ground. Define:\n* $g_m = \\partial I_D/\\partial V_{SG}$ (transconductance)\n* $r_o = 1/(\\lambda I_D)$ (output resistance)\n\nThe small‑signal equivalent has:\n* Gate: $v_{in}$\n* Source node $S$: to ground via $R_S$\n* Drain node $D\\;(=v_{out})$: to ground via $R_D$\n* Transistor branch between $S$ and $D$: current source $g_m v_{gs}$ (with $v_{gs}=v_{in}-v_s$) plus $r_o$.\n\nUsing KCL at the source node:\n$$\\frac{v_s}{R_S} + g_m(v_{in}-v_s) = 0\n\\;\\Rightarrow\\;\nv_s = \\frac{g_m R_S}{1+g_m R_S}v_{in}$$\n\nUsing KCL at the drain node (with $r_o\\to\\infty$ for simplicity):\n$$\\frac{v_{out}}{R_D} + g_m(v_{in}-v_s)=0$$\n\nSubstituting $v_s$ gives the **voltage gain**:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1+g_m R_S}}$$\n\nIf $r_o$ is retained:\n$$\\boxed{A_v = -\\frac{g_m R_D}{1+g_m R_S+\\dfrac{R_S+R_D}{r_o}}}$$\n\n**Special cases:**\n* **No degeneration** ($R_S=0$): $\\displaystyle A_v = -g_m R_D$ (or $-g_m(R_D\\parallel r_o)$).\n* **Large degeneration** ($g_m R_S \\gg 1$): $\\displaystyle A_v \\approx -\\frac{R_D}{R_S}$.\n\n---\n\n## 3. Input / Output Impedances\n\n| Parameter | Expression | Comment |\n|-----------|------------|---------|\n| **Input resistance** $R_{in}$ | $\\infty$ | MOS gate draws no DC or small‑signal current. |\n| **Output resistance** $R_{out}$ | $R_D \\;\\parallel\\; \\bigl[r_o(1+g_m R_S)+R_S\\bigr]$ | $R_S$ boosts the intrinsic $r_o$ by $(1+g_m R_S)$. |\n| **With $r_o\\to\\infty$** | $R_{out}\\approx R_D$ | The external load dominates. |\n\n---\n\n## 4. Role of $R_S$ (Source Degeneration)\n\n| Effect of adding $R_S$ | Explanation |\n|------------------------|-------------|\n| **Gain reduction** | Denominator $(1+g_m R_S)$ lowers $|A_v|$. |\n| **Improved linearity** | Effective transconductance becomes $G_m \\approx 1/R_S$ for large $g_mR_S$, making $I_D$ less sensitive to $V_{in}$ variations. |\n| **Higher $R_{out}$** | The transistor’s own output resistance is multiplied by $(1+g_mR_S)$. |\n| **Bias stability** | $R_S$ provides negative feedback: if $I_D$ tries to increase, $V_S$ rises, reducing $V_{SG}$ and pushing $I_D$ back down. |\n\n---\n\n## 5. Summary\n\nThe circuit is an **inverting PMOS common‑source amplifier**. Its key performance is set by the trade‑off between gain and linearity controlled by $R_S$:\n\n$$\\boxed{A_v \\approx -\\frac{g_m R_D}{1+g_m R_S}},\\qquad R_{in}=\\infty,\\qquad R_{out}=R_D\\parallel\\left[r_o(1+g_mR_S)+R_S\\right]}$$\n\nTo find numerical values you only need the DC bias ($I_D$, hence $g_m$ and $r_o$) from the quadratic equation in §1 and the resistor values $R_S$ and $R_D$.",
        "format": "markdown",
        "sha256": "9005e82ea15415e9f931c427924c8401fa92e4fb8c9156c7cb33e6f40eb28b9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the specified inverting gain, satisfying the explicit full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 20429,
        "total_tokens": 22222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 20429,
        "total_tokens": 22222,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **PMOS common-source (CS) amplifier with unbypassed source degeneration**.\n\n* **M₁**: PMOS transistor (source is the terminal tied toward $V_{DD}$; drain is the lower terminal).\n* **$R_s$**: Source-degeneration resistor.\n* **$R_D$**: Drain load resistor.\n* **$V_{in}$**: Gate input (small-signal + DC bias).\n* **$V_{out}$**: Drain output.\n\nBecause $R_s$ sits between $V_{DD}$ and the source, and $R_D$ sits between the drain and ground, the DC and AC current path is:\n$$V_{DD} \\;\\rightarrow\\; R_s \\;\\rightarrow\\; S \\;\\rightarrow\\; D \\;\\rightarrow\\; R_D \\;\\rightarrow\\; GND$$\n\n---\n\n## 1. DC Operating-Point Analysis\n\nDefine $I_D$ as the DC current flowing from source to drain (magnitude).\n\n**Node voltages:**\n$$V_S = V_{DD} - I_D R_s, \\qquad V_{out} = V_D = I_D R_D$$\n\n**PMOS terminal voltages:**\n$$V_{SG} = V_S - V_{in,DC}, \\qquad V_{SD} = V_S - V_D$$\n\n**Saturation condition** (required for active-region amplification):\n$$V_{SG} > |V_{thp}| \\quad \\text{and} \\quad V_{SD} \\ge V_{SG} - |V_{thp}|$$\n\n**Drain-current equation** (neglecting channel-length modulation $\\lambda$ for simplicity):\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)\\left(V_{SG} - |V_{thp}|\\right)^2$$\n\nGiven $V_{in,DC}$, solve the two equations above for $I_D$, then:\n$$\\boxed{V_{out,DC} = I_D R_D}$$\n\n---\n\n## 2. Small-Signal Parameters\n\nWith the transistor in saturation:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{SG}} = \\mu_p C_{ox}\\left(\\frac{W}{L}\\right)\\left(V_{SG}-|V_{thp}|\\right) = \\frac{2I_D}{V_{SG}-|V_{thp}|}$$\n\n$$r_o = \\frac{1}{\\lambda I_D} \\quad (\\text{output resistance of M}_1)$$\n\nFor AC analysis, $V_{DD}$ and GND are shorted, so:\n* $R_s$ connects node $S$ to **AC ground**.\n* $R_D$ connects node $D$ ($V_{out}$) to **AC ground**.\n\n---\n\n## 3. Small-Signal Voltage Gain\n\nUsing the PMOS small-signal model ($g_m v_{gs}$ current source from D to S, $r_o$ between D and S, gate open):\n\n* $v_{gs} = v_{in} - v_s$\n* KCL at source node $S$ (through $R_s$):\n  $$\\frac{v_s}{R_s} = g_m v_{gs} \\;\\;\\Rightarrow\\;\\; v_s = g_m R_s v_{gs}$$\n\nSubstitute $v_{gs} = v_{in} - v_s$:\n$$v_{gs} = \\frac{v_{in}}{1+g_m R_s}$$\n\n* KCL at drain node $D$:\n  $$\\frac{v_{out}}{R_D} + g_m v_{gs} = 0 \\;\\;\\Rightarrow\\;\\; v_{out} = -g_m R_D v_{gs}$$\n\nHence:\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1+g_m R_s}}$$\n\n### With $r_o$ included (exact)\n$$A_v = -\\frac{g_m R_D \\, r_o}{R_D + R_s + r_o(1+g_m R_s)}$$\n\n**Important limits:**\n* **No degeneration** ($R_s=0$): $A_v = -g_m R_D$.\n* **Strong degeneration** ($g_m R_s \\gg 1$): $A_v \\approx -\\dfrac{R_D}{R_s}$.  \n  The gain becomes set by resistor ratios (high linearity, lower gain).\n\n---\n\n## 4. Input & Output Resistances\n\n* **Input resistance:**\n  $$\\boxed{R_{in} = \\infty}$$\n  (MOSFET gate is insulated; zero DC/small-signal current enters $V_{in}$.)\n\n* **Output resistance** (looking into $V_{out}$ with $v_{in}=0$):\n  The resistance seen into the transistor drain is $r_o(1+g_m R_s)+R_s$. In parallel with $R_D$:\n  $$\\boxed{R_{out} = R_D \\;\\parallel\\; \\left[r_o(1+g_m R_s)+R_s\\right]}$$\n  If $r_o \\to \\infty$, $R_{out} = R_D$.\n\n---\n\n## 5. Summary of Circuit Behavior\n\n| Feature | Expression / Effect |\n|---|---|\n| **Topology** | PMOS common-source with source degeneration |\n| **DC bias** | $V_{out}=I_D R_D$, $V_{SG}$ set by $V_{in,DC}$ |\n| **Small-signal gain** | $A_v = -\\dfrac{g_m R_D}{1+g_m R_s}$ |\n| **Input resistance** | $\\infty$ |\n| **Output resistance** | $R_D \\parallel [r_o(1+g_mR_s)+R_s]$ |\n| **Role of $R_s$** | Reduces gain, improves linearity, raises $R_{out}$, stabilizes $I_D$ against $V_{th}$ / $g_m$ variations |\n\nIf you need a specific quantity (e.g., the numerical gain for given $W/L$, $I_D$, $R_s$, $R_D$), provide those values and the analysis above can be evaluated directly.",
        "format": "markdown",
        "sha256": "f657974cde42a6b322f8827dceb6c67877a0207a4715176bbbbaea08490fa391"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the required inverting gain, -gm RD/(1 + gm Rs). The additional small-signal refinements are consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 15635,
        "total_tokens": 17428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 15635,
        "total_tokens": 17428,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **MOS transistor $M_1$** with:\n\n* Gate driven by signal source $V_{\\text{in}}$\n* Drain ($D$) connected to DC supply $V_{DD}$\n* Source ($S$) connected to node $V_{\\text{out}}$\n* Source resistor $R_S$ from $V_{\\text{out}}$ to ground\n\nAssuming the arrow denotes an **NMOS** device (arrow pointing toward the channel/substrate), the drain is at $V_{DD}$ and the source is the output node. This topology is a **common‑drain (source‑follower)** amplifier—often called a **voltage buffer**.\n\nBelow is a complete analysis: DC biasing, small‑signal model, gain, output resistance, and practical effects (body effect).\n\n---\n\n## 1. DC Operating Point\n\nLet  \n$k \\equiv \\mu_n C_{ox}(W/L)$, $V_{th} = V_{th0}+\\gamma\\bigl(\\sqrt{2\\phi_F+V_{SB}}-\\sqrt{2\\phi_F}\\bigr)$.\n\nBecause the body (substrate) of a standard NMOS is tied to ground,  \n$$V_{SB} = V_{\\text{out}} - 0 = V_{\\text{out}}$$\n\n### Key DC equations (saturation assumed)\n$$I_D = \\frac{k}{2}\\bigl(V_{GS}-V_{th}\\bigr)^2$$\n$$V_{GS} = V_{\\text{in}} - V_{\\text{out}}$$\n$$V_{\\text{out}} = I_D R_S$$\n\nSubstitute $I_D = V_{\\text{out}}/R_S$ and $V_{GS}$:\n$$\\frac{V_{\\text{out}}}{R_S} = \\frac{k}{2}\\bigl(V_{\\text{in}}-V_{\\text{out}}-V_{th}(V_{\\text{out}})\\bigr)^2$$\n\nThis is solved iteratively (or numerically) for $V_{\\text{out}}$ given $V_{\\text{in}}$.\n\n### Saturation check\n$$V_{DS} \\ge V_{GS}-V_{th} \\;\\Rightarrow\\; V_{DD}-V_{\\text{out}} \\ge V_{\\text{in}}-V_{\\text{out}}-V_{th} \\;\\Rightarrow\\; V_{DD} \\ge V_{\\text{in}}-V_{th}$$\nUsually satisfied because $V_{DD}$ is the largest potential.\n\n### DC current\n$$I_D = \\frac{V_{\\text{out}}}{R_S}$$\n\n---\n\n## 2. Small‑Signal Equivalent Circuit\n\nAt AC frequencies (with $V_{DD}$ as ground):\n\n* **Input:** $v_{\\text{in}}$ at gate\n* **Drain:** grounded\n* **Source:** $v_{\\text{out}}$\n* **Transistor model:**\n  * $g_m = \\partial I_D/\\partial V_{GS} = k(V_{GS}-V_{th})$\n  * $g_{mb} = \\partial I_D/\\partial V_{SB} = g_m \\frac{\\gamma}{2\\sqrt{2\\phi_F+V_{SB}}}$ (body effect)\n  * Output resistance $r_o = 1/(\\lambda I_D)$\n  * Body terminal grounded $\\Rightarrow v_{sb} = v_{\\text{out}}$\n\nThe controlled sources are:\n* $g_m v_{gs}$ from $D$ to $S$, with $v_{gs} = v_{\\text{in}}-v_{\\text{out}}$\n* $g_{mb}v_{sb}$ from $D$ to $S$, with $v_{sb} = -v_{\\text{out}}$\n\n---\n\n## 3. Voltage Gain $A_v = v_{\\text{out}}/v_{\\text{in}}$\n\nApply KCL at the source node ($v_{\\text{out}}$):\n\n$$\\frac{v_{\\text{out}}}{R_S} + \\frac{v_{\\text{out}}}{r_o} - \\bigl[g_m v_{gs} + g_{mb}v_{sb}\\bigr] = 0$$\n\nSubstitute $v_{gs}=v_{\\text{in}}-v_{\\text{out}}$ and $v_{sb}=-v_{\\text{out}}$:\n\n$$\\frac{v_{\\text{out}}}{R_S} + \\frac{v_{\\text{out}}}{r_o} - g_m(v_{\\text{in}}-v_{\\text{out}}) + g_{mb}v_{\\text{out}} = 0$$\n\nCollect $v_{\\text{out}}$ terms:\n\n$$v_{\\text{out}}\\left(g_m+g_{mb}+\\frac{1}{r_o}+\\frac{1}{R_S}\\right) = g_m v_{\\text{in}}$$\n\n### Exact gain\n$$\\boxed{A_v = \\frac{g_m}{g_m+g_{mb}+\\frac{1}{r_o}+\\frac{1}{R_S}}}$$\n\n### Common approximations\n* If $r_o \\to \\infty$ (long channel, $\\lambda\\approx 0$):\n  $$A_v = \\frac{g_m}{g_m+g_{mb}+1/R_S}$$\n* If $R_S \\to \\infty$ (current‑source load):\n  $$A_v \\approx \\frac{g_m}{g_m+g_{mb}} = \\frac{1}{1+\\chi} < 1 \\quad (\\chi \\approx 0.2\\!-\\!0.3)$$\n  The **body effect limits the gain to $\\sim$0.8–0.85** unless $M_1$ is placed in a separate well (body tied to source).\n* If body effect is eliminated ($g_{mb}=0$) and $R_S$ is large:\n  $$A_v \\approx 1$$\n\n### Gain with finite $R_S$ (no body effect, $r_o=\\infty$)\n$$\\boxed{A_v = \\frac{g_m R_S}{1+g_m R_S}}$$\nClearly $0 < A_v < 1$; for $g_mR_S \\gg 1$, $A_v \\approx 1 - \\frac{1}{g_mR_S}$.\n\n---\n\n## 4. Output Resistance $R_{\\text{out}}$\n\nSet $v_{\\text{in}} = 0 \\Rightarrow v_{gs} = -v_{\\text{out}}$, then apply a test voltage $v_t$ at $V_{\\text{out}}$:\n\n$$i_t = \\frac{v_t}{R_S} + \\frac{v_t}{r_o} + g_m v_t + g_{mb}v_t$$\n\n$$\\boxed{R_{\\text{out}} = \\frac{1}{g_m+g_{mb}+\\frac{1}{r_o}+\\frac{1}{R_S}}}$$\n\nSpecial cases:\n* $r_o\\to\\infty$, $g_{mb}=0$:\n  $$R_{\\text{out}} = \\frac{1}{g_m}\\parallel R_S \\approx \\frac{1}{g_m}$$\n* With body effect and $R_S\\to\\infty$:\n  $$R_{\\text{out}} \\approx \\frac{1}{g_m+g_{mb}}$$\n\nThe source follower is therefore a **low‑output‑impedance** stage.\n\n---\n\n## 5. Input Resistance\n\nThe gate is insulated by oxide:\n$$\\boxed{R_{\\text{in}} = \\infty} \\quad (\\text{DC and low‑frequency AC})$$\n\n---\n\n## 6. Key Characteristics & Interpretation\n\n| Parameter | Expression / Value | Comment |\n|---|---|---|\n| **Topology** | Common‑drain (source follower) | Drain = AC ground |\n| **Gain** | $\\approx g_m/(g_m+g_{mb}) \\le 1$ | Unity‑gain buffer; $<1$ due to $V_{GS}$ headroom and body effect |\n| **Phase** | Non‑inverting | $v_{\\text{out}}$ follows $v_{\\text{in}}$ |\n| **$R_{\\text{in}}$** | $\\infty$ | Ideal for driving high‑impedance sources |\n| **$R_{\\text{out}}$** | $\\approx 1/(g_m+g_{mb})$ | Much lower than $R_S$; can drive low $R_L$ |\n| **DC Level** | $V_{\\text{out}} = V_{\\text{in}} - V_{GS}$ | Level shift by $\\sim V_{th}+V_{ov}$ |\n\n### Physical insight\nThe transistor acts as a **voltage‑controlled current source** that adjusts $I_D$ so that $V_{GS}$ stays nearly constant. Any increase in $V_{\\text{in}}$ raises $V_{GS}$, increasing $I_D$, which increases $V_{\\text{out}}$ across $R_S$ until $V_{GS}$ returns to its DC value. Because $V_{\\text{out}}$ “follows” $V_{\\text{in}}$ with only a $V_{GS}$ offset, the stage provides **current gain and impedance transformation** (high $R_{\\text{in}}$ $\\to$ low $R_{\\text{out}}$) rather than voltage gain.\n\n### Operating regions\n* **Saturation:** Normal amplifier operation; gain given above.\n* **Triode (linear):** If $V_{\\text{in}}$ is too high so that $V_{DS} < V_{GS}-V_{th}$ (i.e., $V_{DD} < V_{\\text{in}}-V_{th}$), $M_1$ enters triode, $g_m$ drops sharply, and the circuit acts as a nonlinear resistor—undesirable for linear buffering.\n\n---\n\n### Brief note: If $M_1$ were PMOS\nShould the arrow indicate PMOS (source at $V_{DD}$, drain at $V_{\\text{out}}$), the topology becomes a **common‑source amplifier** with resistive load $R_S$. The small‑signal gain would be inverting:\n$$A_v = -g_m R_S \\quad (\\text{with } r_o \\to \\infty)$$\nHowever, the figure’s connection (top terminal to $V_{DD}$, output at bottom via $R_S$ to ground) together with the arrow convention most commonly denotes the **NMOS source follower** analyzed above.\n\n---\n\n**Summary:** The circuit is a **source‑follower (common‑drain) voltage buffer**. It exhibits near‑unity voltage gain ($A_v \\approx 0.8$–$1$), infinite input resistance, and low output resistance ($\\approx 1/g_m$), making it ideal for impedance matching and level shifting in analog integrated circuits.",
        "format": "markdown",
        "sha256": "4e13ec7e58b4a25bc5831701cf6e519316e02e8fa9d254501db364e3feaea2f1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain gmRS/(1 + gmRS), matching the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2105,
        "output_tokens": 21836,
        "total_tokens": 23941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2105,
        "output_tokens": 21836,
        "total_tokens": 23941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a classic **NMOS Common-Drain (CD) amplifier**, also called a **Source Follower** (or voltage buffer).  \nBelow is a structured analysis covering DC biasing, small-signal operation, and key performance metrics.\n\n---\n\n### 1. Circuit Identification\n| Component | Role |\n|---|---|\n| **M₁** | NMOS transistor (arrow on source indicates n-channel; source is the lower terminal tied to $V_{out}$) |\n| **$V_{DD}$** | Positive DC supply (drain connection) |\n| **$V_{in}$** | Input signal (gate) |\n| **$R_S$** | Source resistor to ground; sets DC bias and is part of the AC path |\n| **$V_{out}$** | Output taken at the source terminal |\n\nBecause the drain is at AC ground ($V_{DD}$ is a DC source) and the output is at the source, the transistor is in the **common-drain** configuration.\n\n---\n\n### 2. DC Operating-Point Analysis\nAssume $M_1$ operates in **saturation** (active region), which is required for amplification.\n\n**Transistor equations (long-channel, neglecting $\\lambda$ for simplicity):**\n$$I_D = \\frac{1}{2}k_n(V_{GS}-V_{th})^2, \\quad k_n = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)$$\n\n**Circuit constraints:**\n* Source current $\\approx$ drain current: $I_D \\approx I_S$\n* Ohm’s law on $R_S$: $\\;V_{out} = I_D R_S$\n* Gate–source loop: $\\;V_{GS} = V_{IN} - V_{out} = V_{IN} - I_D R_S$\n\n**Self-consistent solution:**\nSubstitute $V_{GS}$ into the $I_D$ equation:\n$$I_D = \\frac{k_n}{2}\\left(V_{IN} - I_D R_S - V_{th}\\right)^2$$\n\nThis quadratic (or direct substitution) yields $I_D$ and therefore:\n$$V_{out} = I_D R_S, \\qquad V_{GS} = V_{IN} - V_{out}$$\n\n**Saturation check:**\n$$V_{DS} \\ge V_{GS}-V_{th} \\;\\Rightarrow\\; V_{DD} - V_{out} \\ge V_{GS} - V_{th}$$\nIf this fails, $M_1$ enters the **triode (linear)** region.\n\n**Key DC insight:** The output DC level is shifted downward from the input by one $V_{GS}$:\n$$V_{out} = V_{IN} - V_{GS}$$\n\n---\n\n### 3. Small-Signal (AC) Analysis\nSet all DC sources to ground ($V_{DD} \\to$ AC ground). The small-signal model of $M_1$ is:\n* $g_m v_{gs}$ current source from drain (ground) to source\n* Infinite input resistance at the gate ($i_g = 0$)\n* Assume body is tied to source $\\Rightarrow$ no body effect ($g_{mb}=0$)\n* Assume $r_o = \\infty$ (neglect channel-length modulation)\n\n**Definitions:**\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k_n(V_{GS}-V_{th}) = \\sqrt{2k_n I_D}$$\n\n**Node equation at $V_{out}$ (source):**\n$$v_{gs} = v_{in} - v_{out}$$\n$$g_m v_{gs} = \\frac{v_{out}}{R_S}$$\n\nSubstitute $v_{gs}$:\n$$g_m(v_{in} - v_{out}) = \\frac{v_{out}}{R_S}$$\n\n**Voltage gain:**\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1 + g_m R_S}}$$\n\n**Properties:**\n* $A_v < 1$ always (output follows input but with attenuation).\n* If $g_m R_S \\gg 1$, then $A_v \\approx 1 - \\frac{1}{g_m R_S} \\approx 1$.\n* The signal is **non-inverting**.\n\n---\n\n### 4. Input & Output Resistances\n\n| Parameter | Expression | Comment |\n|---|---|---|\n| **Input resistance** $R_{in}$ | $\\infty$ (ideal) | Gate draws zero DC current; in practice limited by oxide leakage / capacitance. |\n| **Output resistance** $R_{out}$ | $\\left(\\frac{1}{g_m}\\right) \\parallel R_S$ | Looking into $V_{out}$: transistor contributes $1/g_m$ to ground (drain is AC ground); $R_S$ is in parallel. |\n| **Approximate $R_{out}$** | $\\approx 1/g_m$ if $R_S \\gg 1/g_m$ | Very low, which is why it is used as a buffer. |\n\nIf **body effect** were present (body tied to ground, not source), replace $g_m$ with $g_m + g_{mb}$ everywhere:\n$$A_v = \\frac{g_m R_S}{1+(g_m+g_{mb})R_S}, \\qquad R_{out} = \\frac{1}{g_m+g_{mb}}\\parallel R_S$$\nBecause the symbol ties the arrow to the source terminal with no separate body lead, we take $g_{mb}=0$.\n\n---\n\n### 5. Large-Signal / Transfer Characteristic ($V_{out}$ vs. $V_{in}$)\n\n| Region of $V_{in}$ | Transistor State | Behavior of $V_{out}$ |\n|---|---|---|\n| $V_{in} < V_{th}$ | **Cutoff** ($I_D = 0$) | $V_{out} = 0$ |\n| $V_{th} \\le V_{in} \\le V_{DD}+V_{th}$ | **Saturation** | $V_{out} = V_{in} - V_{GS}(I_D)$; follows with gain $<1$ but near 1 |\n| $V_{in} > V_{DD}+V_{th}$ | **Triode (Linear)** | $V_{out} \\to V_{DD}$ asymptotically; gain drops toward 0 |\n\n*The “sweet spot” for linear amplification is the middle region where $M_1$ is saturated.*\n\n---\n\n### 6. Key Takeaways (Summary)\n\n1. **Topology:** NMOS Source Follower (Common-Drain).\n2. **Gain:** $A_v = \\frac{g_m R_S}{1+g_m R_S} \\approx 1$ (unity-gain buffer).\n3. **DC Shift:** $V_{out,DC} = V_{IN,DC} - V_{GS}$.\n4. **Impedance:** Very high input impedance; very low output impedance ($\\approx 1/g_m$).\n5. **Use:** Ideal for **impedance transformation**—driving a low-resistance load $R_S$ (or a subsequent stage) from a high-impedance source without signal attenuation (gain close to 1).\n\nIf you provide specific values for $V_{DD}$, $V_{th}$, $k_n$ (or $W/L$), $R_S$, and the input DC level, I can compute the exact quiescent point $I_D$, $V_{GS}$, and the precise small-signal gain $A_v$.",
        "format": "markdown",
        "sha256": "3f133bec22fbe711391d423b315ea262c231ec1ea12f64a3fcdf298e4b1f82ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source follower and gives the positive, less-than-unity gain Av = gmRS/(1 + gmRS), satisfying the full-credit rule. The additional analysis is not needed for full credit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 10607,
        "total_tokens": 12712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 10607,
        "total_tokens": 12712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **single-transistor common-drain (CD) amplifier**, more commonly called a **source follower (SF)**.\n\n*   **Transistor:** $M_1$ is an **NMOS** (the arrow on the source terminal points from the $p$-body to the $n$-source, i.e. outward from the channel toward node $V_{\\rm out}$).\n*   **Connections:** Gate $\\to V_{\\rm in}$; Drain $\\to V_{\\rm DD}$; Source $\\to V_{\\rm out}$.\n*   **Load:** A source resistor $R_S$ connects $V_{\\rm out}$ to ground.\n\nBecause the drain is tied to the AC ground ($V_{\\rm DD}$), the input is applied to the gate, and the output is taken at the **source**, this is the classic **source-follower / common-drain** topology.\n\nBelow is a systematic analysis: DC operating point, large-signal behavior, and small-signal (AC) performance.\n\n---\n\n## 1. DC Analysis & Operating Regions\n\nLet $I_D$ be the DC drain current and assume $M_1$ is in **saturation** (the normal active region for amplification).\n\n| Quantity | Expression |\n|---|---|\n| Source voltage | $V_{\\rm out} = I_D R_S$ |\n| Gate–source voltage | $V_{\\rm GS} = V_{\\rm in} - V_{\\rm out}$ |\n| Overdrive | $V_{\\rm OV} = V_{\\rm GS} - V_{\\rm th}$ |\n| Saturation current | $I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)V_{\\rm OV}^2 \\equiv \\frac{k_n}{2}V_{\\rm OV}^2$ |\n\nCombining these gives the **DC transfer characteristic** implicitly:\n\n$$V_{\\rm out} = R_S \\, I_D = R_S \\frac{k_n}{2}\\left(V_{\\rm in} - V_{\\rm out} - V_{\\rm th}\\right)^2$$\n\nSolving for $V_{\\rm out}$ as a function of $V_{\\rm in}$ yields three regions:\n\n1. **Cutoff** ($V_{\\rm in} < V_{\\rm th}$): $I_D = 0 \\;\\Rightarrow\\; V_{\\rm out} = 0$.\n2. **Saturation** ($V_{\\rm th} \\le V_{\\rm in} \\le V_{\\rm DD}+V_{\\rm th}$): The quadratic above holds. $V_{\\rm out}$ follows $V_{\\rm in}$ with a DC offset of $V_{\\rm GS}$.\n3. **Triode / Deep Triode** ($V_{\\rm in} > V_{\\rm DD}+V_{\\rm th}$): The condition $V_{\\rm DS} \\ge V_{\\rm OV}$ fails because $V_{\\rm DS}=V_{\\rm DD}-V_{\\rm out}$ becomes too small. The transistor behaves like a voltage-controlled resistor.\n\nThe **saturation boundary** is found from $V_{\\rm DS} \\ge V_{\\rm OV}$:\n$$V_{\\rm DD} - V_{\\rm out} \\ge (V_{\\rm in} - V_{\\rm out} - V_{\\rm th}) \\;\\Rightarrow\\; V_{\\rm in} \\le V_{\\rm DD} + V_{\\rm th}.$$\n\n### Quiescent (Bias) Point\nIf $V_{\\rm in}$ is set to a DC bias $V_{\\rm IN}$, the operating point $(V_{\\rm GSQ}, I_{\\rm DQ}, V_{\\rm OUT})$ is found from:\n$$I_{\\rm DQ} = \\frac{V_{\\rm OUT}}{R_S}, \\qquad V_{\\rm GSQ} = V_{\\rm IN} - V_{\\rm OUT} = V_{\\rm th} + \\sqrt{\\frac{2I_{\\rm DQ}}{k_n}}.$$\n\n---\n\n## 2. Large-Signal Transfer Characteristic\n\nThe relationship $V_{\\rm out}(V_{\\rm in})$ is nonlinear because $I_D \\propto V_{\\rm OV}^2$.\n\n*   **Slope:** Differentiating the implicit equation gives\n    $$\\frac{dV_{\\rm out}}{dV_{\\rm in}} = \\frac{g_m}{g_m + 1/R_S} = \\frac{g_m R_S}{1+g_m R_S} < 1.$$\n*   **Behavior:** At low $V_{\\rm in}$ the slope is 0 (cutoff). Once on, the slope rises toward **unity** as $g_m$ increases (i.e., as $I_D$ grows). Thus $V_{\\rm out}$ is a “slightly attenuated and level-shifted” replica of $V_{\\rm in}$.\n\nThe **DC level shift** between input and output is simply $V_{\\rm GS}$:\n$$V_{\\rm out} = V_{\\rm in} - V_{\\rm GS}.$$\n\n---\n\n## 3. Small-Signal (AC) Analysis\n\nReplace $M_1$ with its small-signal model (including the **body effect** because the body/substrate is grounded while the source is at $V_{\\rm out}$):\n\n*   $v_{gs} = v_{\\rm in} - v_{\\rm out}$\n*   $g_m v_{gs}$ current source (drain $\\to$ source)\n*   $g_{mb} v_{bs}$ current source; $v_{bs} = 0 - v_{\\rm out} = -v_{\\rm out}$\n*   Output resistance $r_o = \\frac{1}{\\lambda I_D}$ between drain and source.\n\nThe AC equivalent has the drain grounded, the gate driven by $v_{\\rm in}$, and $R_S$ from source to ground.\n\n### Voltage Gain\nApply KCL at the source node ($v_{\\rm out}$):\n\n$$g_m(v_{\\rm in}-v_{\\rm out}) + g_{mb}(-v_{\\rm out}) + \\frac{0-v_{\\rm out}}{r_o} = \\frac{v_{\\rm out}}{R_S}$$\n\nSolving for $A_v = v_{\\rm out}/v_{\\rm in}$:\n\n$$\\boxed{A_v = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}}}$$\n\nIn the usual case where $r_o \\gg R_S$ and $1/g_m \\ll R_S$:\n\n$$\\boxed{A_v \\approx \\frac{g_m}{g_m + g_{mb} + 1/R_S} = \\frac{g_m R_S}{1+g_m R_S + g_{mb}R_S}}$$\n\nIf the **body effect is neglected** ($g_{mb}=0$):\n\n$$\\boxed{A_v \\approx \\frac{g_m R_S}{1+g_m R_S} \\;\\approx\\; 1 - \\frac{1}{g_m R_S}}$$\n\nBecause $g_m R_S \\gg 1$ in practice, the gain is **close to but slightly less than unity** ($A_v \\approx 0.8$ to $0.95$ is common).\n\nThe body-effect transconductance is:\n$$g_{mb} = g_m \\frac{\\gamma}{2\\sqrt{2\\Phi_F + V_{\\rm SB}}} \\equiv \\chi g_m,$$\nwhere $\\chi \\approx 0.1$–$0.3$. It **reduces the gain** because it adds an effective “degeneration” term.\n\n### Input Resistance\nThe gate is insulated:\n$$\\boxed{R_{\\rm in} = \\infty}$$\n\n### Output Resistance\nSet $v_{\\rm in}=0$ (so $v_{gs}=-v_{\\rm out}$) and apply a test source $v_t$ at $v_{\\rm out}$. The transistor presents a resistance of $1/(g_m+g_{mb}+1/r_o)$ looking into the source; this is in **parallel** with $R_S$:\n\n$$\\boxed{R_{\\rm out} = \\left(\\frac{1}{g_m+g_{mb}+1/r_o}\\right) \\parallel R_S \\approx \\frac{1}{g_m+g_{mb}} \\parallel R_S}$$\n\nIf $g_{mb}=0$ and $r_o\\to\\infty$:\n$$\\boxed{R_{\\rm out} \\approx \\frac{1}{g_m} \\parallel R_S}$$\n\nBecause $1/g_m$ is typically small (e.g., $50$–$500\\,\\Omega$), $R_{\\rm out}$ is **low**, which is exactly why a source follower is used as a **voltage buffer**.\n\n---\n\n## 4. Key Design Insights\n\n| Feature | Expression / Comment |\n|---|---|\n| **Gain** | $A_v \\approx 1$ (but $<1$); precise value depends on $g_m$, $g_{mb}$, and $R_S$. |\n| **DC shift** | $V_{\\rm out} = V_{\\rm in} - V_{\\rm GS}$; cannot pass DC levels unchanged. |\n| **Linearity** | Nonlinear because $V_{\\rm GS}$ varies with signal current ($\\sqrt{I_D}$ dependence). |\n| **Body effect** | $V_{\\rm SB}=V_{\\rm out}>0$ causes $g_{mb}>0$, reducing gain and increasing output resistance slightly. |\n| **Use** | High-$R_{\\rm in}$ / low-$R_{\\rm out}$ buffer; level shifter; driving capacitive loads (e.g., in CMOS output stages). |\n| **Trade-off** | Large $R_S$ $\\Rightarrow$ higher $g_m R_S$ $\\Rightarrow$ gain closer to 1, but requires larger $V_{\\rm DD}$ headroom and reduces current efficiency. |\n\n---\n\n## 5. Summary of Main Results (Idealized: $r_o \\to \\infty$, $g_{mb}=0$)\n\n$$\\boxed{A_v = \\frac{g_m R_S}{1+g_m R_S}} \\qquad \\boxed{R_{\\rm in} = \\infty} \\qquad \\boxed{R_{\\rm out} = \\frac{1}{g_m} \\parallel R_S}$$\n\nwith $g_m = \\sqrt{k_n I_{DQ}}$ (or $g_m = \\mu_n C_{ox}(W/L)V_{\\rm OV}$).\n\nIf body effect is included, replace $g_m$ with $g_m+g_{mb}$ in the denominator of $A_v$ and $R_{\\rm out}$.\n\n---\n\n**In short:** The circuit is an **NMOS source follower (common-drain)**. It provides a **unity-gain, high-input-impedance, low-output-impedance buffer**, with a DC level shift of $V_{\\rm GS}$. The exact small-signal gain is set by the ratio of $g_m$ (and $g_{mb}$) to $1/R_S$, always yielding $0 < A_v < 1$.",
        "format": "markdown",
        "sha256": "3291ef89ed0cdfd4f4d35dd42cc4cd84019b0f0c6dac36d6a4887b885114e4dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm·RS/(1 + gm·RS), satisfying the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19975,
        "total_tokens": 22080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19975,
        "total_tokens": 22080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, this is a **common-gate (CG) MOSFET amplifier stage** (resistive-load) with the following connections:\n\n- **$M_1$:** NMOS transistor (arrow on source terminal pointing toward the channel)\n- **Gate ($G$):** DC biased at $V_{DD}$ (AC ground)\n- **Source ($S$):** Input terminal $V_{in}$\n- **Drain ($D$):** Output node $V_{out}$\n- **Load:** $R_D$ from $V_{DD}$ to $V_{out}$\n\nBelow is the full analysis: DC operating point, small-signal parameters, and key performance metrics.\n\n---\n\n## 1. DC Operating Point (Bias Analysis)\n\nLet $v_{IN} = V_{IN} + v_{in}$, where $V_{IN}$ is the DC bias and $v_{in}$ is the small signal.\n\n| Quantity | Expression / Condition |\n|---|---|\n| Gate voltage | $V_G = V_{DD}$ |\n| Source voltage | $V_S = V_{IN}$ |\n| $V_{GS}$ | $V_{GS} = V_{DD} - V_{IN}$ |\n| Drain current (saturation) | $I_D = \\frac{1}{2}k_n(V_{GS}-V_{thn})^2 = \\frac{1}{2}k_n(V_{DD}-V_{IN}-V_{thn})^2$ |\n| $V_{OUT}$ | $V_{OUT} = V_{DD} - I_D R_D$ |\n\n**Saturation condition** (required for active amplification):\n$$V_{DS} \\ge V_{GS} - V_{thn} \\;\\Rightarrow\\; V_{OUT} - V_{IN} \\ge V_{DD} - V_{IN} - V_{thn}$$\n$$\\boxed{V_{OUT} \\ge V_{DD} - V_{thn}}$$\n\nBecause $V_{OUT} = V_{DD} - I_D R_D < V_{DD}$, this means $I_D R_D \\le V_{thn}$. The transistor operates in saturation with $V_{DS}$ close to $V_{GS}$.\n\n---\n\n## 2. Small-Signal Model ($v_{in}$, $v_{out}$)\n\nReplace $M_1$ with its hybrid-$\\pi$ model ($g_m$, $r_o$) and ground all DC sources ($V_{DD} \\to$ AC ground):\n\n- $v_{gs} = v_G - v_S = 0 - v_{in} = -v_{in}$\n- Controlled source: $g_m v_{gs} = -g_m v_{in}$ (directed $D \\to S$)\n- Output resistance of transistor: $r_o = \\frac{1}{\\lambda I_D}$\n\nThe small-signal equivalent circuit is:\n- $R_D$ from $v_{out}$ to ground\n- $r_o$ between $v_{out}$ (drain) and $v_{in}$ (source)\n- Current source $g_m v_{gs}$ across $D$-$S$\n\n---\n\n## 3. Key Small-Signal Results\n\n### Voltage Gain\nApplying KCL at the drain node:\n\n$$\\frac{v_{out}}{R_D} + \\frac{v_{out}-v_{in}}{r_o} + g_m v_{gs} = 0, \\quad v_{gs}=-v_{in}$$\n\nSolving for $v_{out}/v_{in}$:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{(1+g_m r_o)R_D}{R_D+r_o} \\approx g_m R_D}$$\n\nThe gain is **positive (non-inverting)** and has the same magnitude as a common-source stage, $|A_v| \\approx g_m R_D$, because the current through $R_D$ is boosted by the transistor's transconductance.\n\n### Transconductance\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\sqrt{2k_n I_D} = \\frac{2I_D}{V_{GS}-V_{thn}}$$\n\n### Input Resistance ($R_{in}$)\nLooking into the source with the drain loaded by $R_D$:\n\n$$\\boxed{R_{in} = \\frac{v_{in}}{i_{in}} = \\frac{R_D+r_o}{1+g_m r_o} \\approx \\frac{1}{g_m}}$$\n\nThis is the classic **low input resistance** of common-gate stages ($\\sim 1/g_m$, typically tens to hundreds of ohms).\n\n### Output Resistance ($R_{out}$)\nLooking back from $V_{out}$ with $v_{in}$ set to zero (source grounded for AC):\n\n$$\\boxed{R_{out} = R_D \\parallel r_o \\approx R_D}$$\n\n(If $v_{in}$ is driven by a source with resistance $R_s$, the effective output resistance seen by $R_D$ is slightly different, but usually $R_{out} \\approx R_D$ dominates.)\n\n---\n\n## 4. Summary of Circuit Behavior\n\n| Parameter | Expression / Value |\n|---|---|\n| **Topology** | Common-Gate (CG) with resistive load |\n| **Gain $A_v$** | $\\approx +g_m R_D$ (non-inverting) |\n| **Input resistance** | $\\approx 1/g_m$ (low) |\n| **Output resistance** | $\\approx R_D \\parallel r_o \\approx R_D$ |\n| **Bandwidth / use** | Good for current buffering, RF low-noise stages, or as a cascode element; poor voltage buffering due to low $R_{in}$ |\n\n---\n\n### Quick Design Check\nTo keep $M_1$ in saturation with $V_{DD} = 1.8\\,$V, $V_{thn} = 0.4\\,$V, and $R_D = 5\\,$k$\\Omega$:\n- Choose $I_D \\approx 0.2\\,$mA $\\Rightarrow V_{OUT} = 1.8 - (0.2\\text{m})(5\\text{k}) = 0.8\\,$V.\n- Then $V_{GS} = V_{DD} - V_{IN}$. If $V_{IN} = 1.0\\,$V, $V_{GS} = 0.8\\,$V.\n- Check: $V_{DS} = 0.8 - 1.0 = -0.2\\,$V? Wait—this means $V_{in} > V_{out}$, violating $V_{DS} \\ge V_{GS}-V_{th}$. \n\n**Correct bias:** You need $V_{IN} < V_{OUT} \\approx V_{DD} - I_D R_D$. For $V_{OUT} \\approx 1.4\\,$V ($I_D = 80\\,\\mu$A), set $V_{IN} \\approx 0.8\\,$V so $V_{GS} = 1.0\\,$V and $V_{DS} = 0.6\\,$V $\\ge 1.0-0.4 = 0.6\\,$V (at edge of saturation).\n\n---\n\n**Bottom line:** The figure is a **common-gate NMOS amplifier**. Its small-signal voltage gain is $g_m R_D$, but because the input is at the source, its input resistance is only $\\approx 1/g_m$, making it ideal for current-mode or high-frequency applications rather than as a high-impedance voltage amplifier.",
        "format": "markdown",
        "sha256": "0f2361e4ef86c3108953b7ae1fcf8fdba6cd9b1fdcfb62de69a810435b458bdd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology and gives the non-inverting gain and low input resistance. The finite-ro gain and input-resistance expressions are also consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2105,
        "output_tokens": 18303,
        "total_tokens": 20408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2105,
        "output_tokens": 18303,
        "total_tokens": 20408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13779,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic shows a **resistive-loaded common‑source NMOS amplifier** (often called an NMOS inverter stage in digital contexts).  \nInterpreting the connections:\n\n* **$M_1$**: n‑channel MOSFET (NMOS). The arrow on the source terminal points toward the channel, indicating $p$‑body to $n$‑channel.\n* **Gate** of $M_1$ is driven by the input voltage $V_{\\text{in}}$.\n* **Source** of $M_1$ is grounded ($0\\;$V).\n* **Drain** of $M_1$ is the node $V_{\\text{out}}$.\n* **$R_D$** is the drain (pull‑up) resistor connected to the supply $V_{DD}$.\n\nBelow is a complete analysis: DC operating point, large‑signal transfer characteristic, and small‑signal (AC) behavior.\n\n---\n\n## 1. DC Analysis (Quiescent Point)\n\nLet $V_{GS} = V_G - V_S = V_{\\text{in}} - 0 = V_{\\text{in}}$.\n\nUsing the long‑channel MOS model (neglecting channel‑length modulation $\\lambda=0$ for simplicity):\n\n| Region | Condition on $V_{GS}$ and $V_{DS}$ | Drain current $I_D$ |\n|--------|-----------------------------------|---------------------|\n| **Cutoff** | $V_{GS} < V_{th}$ | $I_D = 0$ |\n| **Saturation** | $V_{GS} \\ge V_{th}$ and $V_{DS} \\ge V_{GS} - V_{th}$ | $I_D = \\frac{1}{2}k_n(V_{GS}-V_{th})^2$ |\n| **Triode (Linear)** | $V_{GS} \\ge V_{th}$ and $V_{DS} < V_{GS} - V_{th}$ | $I_D = k_n\\big[(V_{GS}-V_{th})V_{DS} - \\frac{V_{DS}^2}{2}\\big]$ |\n\nwhere $k_n = \\mu_n C_{ox}(W/L)$.\n\nBecause $V_{DS} = V_{\\text{out}}$ and by KVL at the drain node:\n\n$$\nV_{\\text{out}} = V_{DD} - I_D R_D\n$$\n\n### Operating regions vs. $V_{\\text{in}}$\n\n1. **Cutoff ($V_{\\text{in}} < V_{th}$):**  \n   $I_D = 0 \\;\\Rightarrow\\; V_{\\text{out}} = V_{DD}$.\n\n2. **Saturation ($V_{\\text{in}} \\ge V_{th}$ and $V_{\\text{out}} \\ge V_{\\text{in}}-V_{th}$):**  \n   Substitute $I_D$:\n   $$\n   V_{\\text{out}} = V_{DD} - \\frac{1}{2}k_n R_D\\,(V_{\\text{in}}-V_{th})^2\n   $$\n   This is a **parabolic** drop in $V_{\\text{out}}$ as $V_{\\text{in}}$ rises.\n\n3. **Triode / Deep Triode ($V_{\\text{in}}$ large enough that $V_{\\text{out}} < V_{\\text{in}}-V_{th}$):**  \n   $M_1$ acts like a voltage‑controlled resistor. $V_{\\text{out}}$ falls to a small value $V_{OL}$.\n\nThe **boundary** between saturation and triode is found from $V_{DS} = V_{GS} - V_{th}$:\n$$\nV_{DD} - I_D R_D = V_{\\text{in}} - V_{th}\n\\;\\Rightarrow\\;\n\\frac{1}{2}k_n R_D\\,(V_{\\text{in}}-V_{th})^2 + (V_{\\text{in}}-V_{th}) - V_{DD} = 0\n$$\n\n---\n\n## 2. Large‑Signal Voltage‑Transfer Characteristic (VTC)\n\nThe DC transfer curve $V_{\\text{out}}$ vs. $V_{\\text{in}}$ has three distinct regions:\n\n* **High output:** $V_{\\text{out}} = V_{DD}$ for $V_{\\text{in}} < V_{th}$.\n* **Falling quadratic:** In saturation, $V_{\\text{out}}$ decreases quadratically with $V_{\\text{in}}$.\n* **Low output:** In triode, $V_{\\text{out}} \\approx V_{OL} \\approx \\frac{V_{DD}}{1+k_n R_D(V_{\\text{in}}-V_{th})}$ (approx. small).\n\nThis is the classic **inverting** behavior: a high $V_{\\text{in}}$ produces a low $V_{\\text{out}}$ and vice‑versa.\n\n---\n\n## 3. Small‑Signal (AC) Analysis\n\nAssume $M_1$ is biased in **saturation** (the active/amplifying region).  \nThe transistor is modeled by its transconductance $g_m$ and output resistance $r_o$:\n\n$$\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k_n(V_{GS}-V_{th}) = \\sqrt{2k_n I_D}\n\\qquad\\text{(in saturation)}\n$$\n\n$$\nr_o = \\frac{1}{\\lambda I_D} \\quad (\\lambda \\approx 0 \\;\\Rightarrow\\; r_o \\to \\infty)\n$$\n\n### Small‑signal equivalent\n* $v_{\\text{in}}$ is applied to the gate $\\Rightarrow v_{gs} = v_{\\text{in}}$.\n* The source is AC ground.\n* The drain current source is $g_m v_{gs}$ directed from D to S.\n* $R_D$ and $r_o$ appear in parallel between $v_{\\text{out}}$ and ground.\n\nApplying KCL at $v_{\\text{out}}$:\n\n$$\ng_m v_{gs} + \\frac{v_{\\text{out}}}{r_o} + \\frac{v_{\\text{out}}}{R_D} = 0\n$$\n\nSince $v_{gs} = v_{\\text{in}}$:\n\n$$\nv_{\\text{out}} = -g_m (R_D \\parallel r_o)\\, v_{\\text{in}}\n$$\n\n### Key small‑signal parameters\n\n| Parameter | Expression |\n|-----------|------------|\n| **Voltage gain** | $\\displaystyle A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_m(R_D \\parallel r_o) \\approx -g_m R_D \\;\\;(\\lambda=0)$ |\n| **Input resistance** | $R_{\\text{in}} = \\infty$ (MOS gate is insulated; DC leakage $\\approx 0$) |\n| **Output resistance** | $R_{\\text{out}} = R_D \\parallel r_o$ |\n\nThe negative sign confirms the **inverting** nature: a positive $v_{\\text{in}}$ increment increases $I_D$, pulling $v_{\\text{out}}$ down.\n\n---\n\n## 4. Design / Performance Notes\n\n* **Gain–bandwidth trade‑off:** Increasing $R_D$ raises $|A_v|$ but lowers the DC operating point $V_{\\text{out}} = V_{DD} - I_D R_D$ and reduces bandwidth because the output time constant is $\\tau = R_{\\text{out}} C_{\\text{load}}$.\n* **Intrinsic gain limit:** Even with $R_D \\to \\infty$ (current‑source load), the maximum achievable gain of a single transistor is its intrinsic gain $A_0 = g_m r_o$.\n* **Headroom:** For maximum signal swing, bias $V_{\\text{in}}$ so that $V_{\\text{out}}$ lies near $V_{DD}/2$ (mid‑rail), keeping $M_1$ well in saturation.\n\n---\n\n### Summary\n\nThe circuit is a **common‑source NMOS amplifier with resistive load $R_D$**. Its DC behavior is governed by $V_{\\text{out}} = V_{DD} - I_D(V_{\\text{in}})R_D$, and in the active (saturation) region it provides a small‑signal voltage gain of\n\n$$\n\\boxed{A_v = -g_m(R_D \\parallel r_o) \\approx -g_m R_D}\n$$\n\nwith infinite input resistance and output resistance $R_D \\parallel r_o$. The stage is inverting and is the fundamental building block of NMOS analog amplifiers and digital NMOS logic.",
        "format": "markdown",
        "sha256": "b9880df426119717035c89892bdf533f943e19e9080b09ecb969e967500aafa5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the circuit as common-source with gate input and grounded source. The actual circuit is common-gate with source input and an AC-grounded gate, so the claimed negative gain and infinite input resistance contradict the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14689,
        "total_tokens": 16794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 14689,
        "total_tokens": 16794,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, the circuit is a **common-source (CS) NMOS amplifier** (sometimes called a common-emitter stage in BJT terminology). The key components are:\n\n- **$M_1$**: NMOS transistor ($V_{th}>0$; the arrow on the source/body terminal points toward the $n$-channel, identifying it as NMOS with the substrate/body tied to source/ground).\n- **$R_D$**: Drain load resistor.\n- **$V_{DD}$**: DC supply.\n- **$V_{in}$**: Input voltage applied to the **gate** of $M_1$.\n- **$V_{out}$**: Output node taken at the **drain** of $M_1$ (the node between $R_D$ and the transistor).\n- The **source** of $M_1$ is at ground (implied by the return path of $V_{in}$).\n\nBelow is the systematic analysis: DC operating point, small-signal behavior, and transfer characteristics.\n\n---\n\n## 1. DC Analysis (Large-Signal)\n\nAssume $V_{in}$ contains a DC bias $V_{GS}$ plus a small AC signal $v_{in}$.\n\n### Transistor current\nBecause the source is grounded:\n$$V_{GS} = V_{in,DC} \\equiv V_{GS}$$\n\nIn **saturation** ($V_{DS} \\ge V_{GS}-V_{th}$):\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{GS}-V_{th})^2$$\nOften written as $I_D = \\frac{1}{2}k_n'(W/L)(V_{GS}-V_{th})^2$.\n\n### Output DC voltage\nApplying KVL at the drain node:\n$$V_{out} = V_{DD} - I_D R_D$$\n\n### Drain-source voltage\n$$V_{DS} = V_{out} - 0 = V_{DD} - I_D R_D$$\n\n### Saturation condition\nTo stay in saturation (the active region for amplification):\n$$V_{DS} \\ge V_{GS} - V_{th} \\quad \\Longrightarrow \\quad V_{DD} - I_D R_D \\ge V_{GS} - V_{th}$$\n\nIf $V_{in}$ is too large, $I_D$ becomes large and $V_{out}$ drops so low that $V_{DS} < V_{GS}-V_{th}$; the transistor enters the **triode (linear) region** and acts like a voltage-controlled resistor.\n\n---\n\n## 2. DC Transfer Characteristic $V_{out}$ vs. $V_{in}$\n\n| Region of $M_1$ | Condition | $V_{out}$ Behavior |\n|---|---|---|\n| **Cutoff** | $V_{in} < V_{th}$ | $I_D=0 \\Rightarrow V_{out} = V_{DD}$ |\n| **Saturation** | $V_{th} \\le V_{in}$ and $V_{DS} \\ge V_{GS}-V_{th}$ | $V_{out} = V_{DD} - \\frac{1}{2}k_n'(W/L)R_D(V_{in}-V_{th})^2$ (parabolic drop) |\n| **Triode** | $V_{DS} < V_{GS}-V_{th}$ | $I_D \\approx k_n'(W/L)[(V_{GS}-V_{th})V_{DS} - V_{DS}^2/2]$; $V_{out}$ approaches $0$ as $V_{in}$ increases further |\n\nThe \"switching point\" from saturation to triode occurs when $V_{out} = V_{in} - V_{th}$.\n\n---\n\n## 3. Small-Signal Analysis\n\nReplace $M_1$ with its small-signal model (intrinsic gain $g_m v_{gs}$, output resistance $r_o = 1/(\\lambda I_D)$):\n\n- **Transconductance**:\n  $$g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\sqrt{2 k_n'(W/L) I_D} = \\frac{2I_D}{V_{GS}-V_{th}}$$\n\n- **Small-signal equivalent**: $v_{in}$ drives $v_{gs}$; the drain current source $g_m v_{gs}$ flows through the parallel combination of $R_D$ and $r_o$.\n\n### Voltage gain\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_m (R_D \\parallel r_o)$$\n\nIf channel-length modulation is neglected ($\\lambda \\approx 0 \\Rightarrow r_o \\to \\infty$):\n$$\\boxed{A_v \\approx -g_m R_D}$$\n\nThe negative sign indicates **180° phase inversion**: when $v_{in}$ rises, $I_D$ increases, pulling $V_{out}$ down.\n\n### Input resistance\nThe gate is insulated (oxide), so:\n$$\\boxed{R_{in} = \\infty}$$\n(For DC, it is infinite; for AC, limited only by any external bias network not shown here.)\n\n### Output resistance\nLooking into the drain node (with $v_{in}=0 \\Rightarrow g_m v_{gs}=0$):\n$$\\boxed{R_{out} = R_D \\parallel r_o \\approx R_D}$$\n\n---\n\n## 4. Key Design Observations\n\n1. **Gain magnitude**: $|A_v| = g_m R_D$. To increase gain:\n   - Increase $I_D$ (raises $g_m$), but this lowers $V_{out}$ and moves the transistor closer to triode.\n   - Increase $R_D$, but $V_{DD}-I_D R_D$ must remain above $V_{GS}-V_{th}$ to stay in saturation.\n   - Increase $W/L$.\n\n2. **Trade-off**: A larger $R_D$ gives higher gain but reduces the headroom at $V_{out}$ and lowers the maximum allowable $I_D$ before entering triode.\n\n3. **Output swing**: The maximum undistorted output is roughly $V_{DD}$ (high, when $M_1$ is off) down to $V_{GS}-V_{th}$ (low, edge of saturation).\n\n4. **Body effect**: If the source were not grounded (e.g., in a source-degenerated stage), $V_{th}$ would increase with $V_{SB}$. Here $V_{SB}=0$, so $V_{th}$ is constant.\n\n---\n\n## 5. Summary Equation Set (Saturation)\n\n$$\\boxed{I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{th})^2}$$\n$$\\boxed{V_{out} = V_{DD} - I_D R_D}$$\n$$\\boxed{A_v = -g_m(R_D \\parallel r_o) \\approx -\\sqrt{2\\mu_n C_{ox}(W/L)I_D}\\;R_D}$$\n\nThis is the classic **common-source stage**—the fundamental voltage amplifier building block of CMOS analog design—providing high input impedance, moderate-to-high gain (set by $g_m R_D$), and signal inversion.",
        "format": "markdown",
        "sha256": "0ae2ae2be73f4e4b7310366e65312cd35df87e4d8b7dd79da11c6f5b3fca5ed5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology and input node: Vin is applied to M1's source while its gate is AC-grounded, making this a common-gate stage. Consequently its claimed inverted gain and infinite input resistance are wrong for the shown circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19651,
        "total_tokens": 21756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19651,
        "total_tokens": 21756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, the circuit is a **capacitor-coupled NMOS common-source (CS) amplifier** with an independent bulk (body) bias terminal. Here is the detailed breakdown of its connections and analysis.\n\n---\n\n### 1. Circuit Identification & Connections\n\n| Component | Function / Connection |\n|---|---|\n| **$V_{DD}$** | DC supply; $R_D$ connects it to the output node. |\n| **$R_D$** | Drain load resistor. |\n| **$M_1$** | 4-terminal NMOS transistor:<br>• **Drain** $\\rightarrow V_{out}$<br>• **Source** $\\rightarrow$ Ground ($V_S = 0$)<br>• **Gate** $\\rightarrow$ right plate of $C_1$<br>• **Bulk (Body)** $\\rightarrow V_b$ |\n| **$C_1$** | AC coupling (blocking) capacitor between the input signal $V_{in}$ and the gate of $M_1$. |\n| **$V_{in}$** | Small-signal input (assumed to have a DC bias that sets $V_{GS}$, or a separate $R_G$ to bias is implied but omitted for clarity). |\n| **$V_b$** | DC bulk/substrate voltage that controls the threshold via the **body effect**. |\n| **$V_{out}$** | Output taken at the drain node. |\n\nThe arrow inside $M_1$ points **inward** (toward the channel), confirming it is an **NMOS** device ($p$-bulk, $n$-channel).\n\n---\n\n### 2. DC Operating-Point Analysis\n\nBecause $C_1$ is open at DC, the gate DC voltage $V_G$ is set by an external bias network (not shown). The source is grounded:\n\n$$V_S = 0, \\qquad V_B = V_b$$\n\n**Body-effect (back-gate effect):**  \nFor the source-bulk $p$-$n$ junction to remain reverse-biased, we need $V_b \\le V_S = 0$. The source-to-body voltage is:\n\n$$V_{SB} = V_S - V_B = -V_b \\quad (\\ge 0)$$\n\nThe threshold voltage is therefore:\n\n$$\\boxed{V_{th} = V_{th0} + \\gamma\\left(\\sqrt{2\\phi_F + V_{SB}} - \\sqrt{2\\phi_F}\\right)}$$\n\nwhere $\\gamma$ is the body-effect coefficient and $2\\phi_F$ is the surface potential.\n\n**Drain current (saturation):**  \nAssuming $M_1$ is biased in saturation ($V_{DS} \\ge V_{GS}-V_{th}$):\n\n$$\\boxed{I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\left(V_{GS} - V_{th}\\right)^2}$$\n\n**Output DC voltage:**\n\n$$\\boxed{V_{out} = V_{DD} - I_D R_D}$$\n\n> **Key point:** Changing $V_b$ changes $V_{SB}$, which changes $V_{th}$. A more negative $V_b$ $\\Rightarrow$ larger $V_{SB}$ $\\Rightarrow$ larger $V_{th}$ $\\Rightarrow$ smaller $I_D$ (for fixed $V_{GS}$) and thus a lower $V_{out}$.\n\n---\n\n### 3. Small-Signal (Mid-Band) Analysis\n\nFor AC signals of interest:\n- $C_1$ acts as a short ($Z_C \\approx 0$).\n- $V_{DD}$ and $V_b$ are AC grounds.\n- The MOSFET is modeled by transconductance $g_m$ and output resistance $r_o$.\n\n**Small-signal gate-source voltage:**\n$$v_{gs} = v_{in}$$\n\nBecause both the **source** ($v_s = 0$) and the **bulk** ($v_b = 0$) are at AC ground:\n\n$$v_{sb} = v_s - v_b = 0$$\n\nThus, although $V_{SB} \\neq 0$ at DC (affecting $g_m$ through $V_{th}$), there is **no explicit $g_{mb}$ current source** in the small-signal model because $v_{sb}=0$.\n\n**Small-signal drain current:**\n$$i_d = g_m v_{gs} = g_m v_{in}$$\n\nwhere\n\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{th}) = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}$$\n\n**Output node (KCL):**\nThe current $i_d$ flows down through the transistor and is split between $R_D$ and $r_o$ (from drain to source):\n\n$$v_{out} = -i_d \\left(R_D \\parallel r_o\\right) = -g_m (R_D \\parallel r_o)\\,v_{in}$$\n\n**Voltage gain:**\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m\\left(R_D \\parallel r_o\\right) \\approx -g_m R_D \\quad (\\text{if } r_o \\gg R_D)}$$\n\nThe negative sign indicates **180° phase inversion**, characteristic of a common-source stage.\n\n---\n\n### 4. Input & Output Impedances\n\n| Parameter | Expression | Comment |\n|---|---|---|\n| **Input resistance** $R_{in}$ | $\\infty$ (ideally) | The gate is insulated; no DC current enters $M_1$’s gate. |\n| **Output resistance** $R_{out}$ | $R_D \\parallel r_o$ | Looking into $V_{out}$, $R_D$ is in parallel with the transistor’s $r_o$. |\n\n> **Note on $C_1$:** If the signal source $V_{in}$ has a finite internal resistance $R_s$, then $C_1$ forms a high-pass filter with $R_s$ and $R_{in}$. The lower 3-dB frequency is $\\omega_L \\approx 1/(C_1 R_s)$ because $R_{in}=\\infty$ means the pole is set entirely by the source resistance.\n\n---\n\n### 5. Role of $V_b$ (Body Bias)\n\nBecause the bulk is not tied to the source ($V_{SB} \\neq 0$ when $V_b < 0$), the **body effect** is active:\n\n- $V_{th}$ increases with $|V_b|$.\n- For a fixed $V_{GS}$, $I_D$ decreases.\n- $g_m$ is reduced because $g_m \\propto (V_{GS}-V_{th})$.\n- Therefore, **the small-signal gain magnitude $|A_v| = g_m R_D$ decreases** as $V_b$ becomes more negative.\n\nIf $V_b = 0$ (bulk grounded to source), then $V_{SB}=0$, $V_{th}=V_{th0}$, and the body effect is eliminated.\n\n---\n\n### 6. Summary of Key Results\n\n- **Topology:** NMOS common-source amplifier with AC-coupled input.\n- **DC:** $V_{out} = V_{DD} - I_D(V_{th}(V_b))\\,R_D$.\n- **Mid-band gain:** $\\displaystyle A_v = -g_m (R_D \\parallel r_o)$.\n- **Input impedance:** Infinite.\n- **Output impedance:** $R_D \\parallel r_o$.\n- **Effect of $C_1$:** Blocks DC, passes AC; determines the low-frequency cutoff with $R_s$.\n- **Effect of $V_b$:** Modulates $V_{th}$ via body effect, thereby tuning $I_D$ and $g_m$.\n\nIf you need the explicit frequency response (transfer function $V_{out}(s)/V_{in}(s)$ including $C_1$ and any parasitic capacitances $C_{gs}, C_{gd}$), or if $M_1$ operates in the **triode region**, let me know and I can extend the analysis accordingly.",
        "format": "markdown",
        "sha256": "c524741b7624cf35946565997939d2859bbf8edfb19b608e3cbeb438774ecfdb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections: the input is coupled to the source node, which is directly shorted to ground, while the gate is biased by Vb. It therefore misses the decisive input short and analyzes a different common-source circuit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2313,
        "output_tokens": 25148,
        "total_tokens": 27461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2313,
        "output_tokens": 25148,
        "total_tokens": 27461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20735,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **single-stage common-source (CS) amplifier** using a 4-terminal NMOS transistor ($M_1$).  \nThe key components are:\n\n| Component | Function |\n|-----------|----------|\n| $V_{DD}$, $R_D$ | Supply and drain load resistor |\n| $M_1$ (G, D, S, B) | NMOS transistor; Gate ($G$) is driven via $C_1$, Drain ($D$) is at $V_{out}$, Source ($S$) is grounded, Bulk/Body ($B$) is biased at $V_b$ |\n| $C_1$ | Input **coupling (DC-blocking)** capacitor |\n| $V_{in}$ | Small-signal AC input source |\n| $V_b$ | DC body/bulk bias voltage (controls the body effect) |\n\nBelow is a complete analysis in two parts: **DC (quiescent)** and **small-signal AC**.\n\n---\n\n## 1. DC Operating-Point Analysis\n\nBecause $C_1$ is a capacitor, it is an **open circuit** at DC.\n\n- **Gate DC voltage ($V_G$):** The DC level at the gate of $M_1$ is set by an external bias network (e.g. a high-value resistor $R_G$ to a DC voltage source, not shown explicitly). We denote this DC value as $V_G$.\n- **Source:** $V_S = 0$ V (ground).\n- **Drain current ($I_D$):** For $M_1$ to act as an amplifier, it must operate in **saturation**:\n  $$V_{GS} > V_{th} \\quad \\text{and} \\quad V_{DS} \\ge V_{GS} - V_{th}$$\n  Using the long-channel square-law model:\n  $$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_{GS}-V_{th})^2$$\n\n- **Body-effect on $V_{th}$:** Because the source is grounded but the body is at $V_b$, the source-to-body voltage is\n  $$V_{SB} = V_S - V_b = -V_b$$\n  For an NMOS in a p-substrate, the diode must remain reverse-biased, so $V_b \\le 0$. The threshold voltage becomes:\n  $$V_{th} = V_{th0} + \\gamma\\left(\\sqrt{2\\phi_F + V_{SB}} - \\sqrt{2\\phi_F}\\right)$$\n  Thus $V_b$ directly controls $V_{th}$, which in turn sets $I_D$ for a given $V_{GS}$.\n\n- **Output DC voltage:**\n  $$V_{out,DC} = V_{DD} - I_D R_D$$\n\n---\n\n## 2. Small-Signal (AC) Analysis\n\nFor signal frequencies where the impedance of $C_1$ is negligible ($|Z_{C1}| \\approx 0$), $C_1$ acts as a **short circuit** for $v_{in}$. The small-signal voltage at the gate is therefore:\n$$v_g = v_{in}$$\n\n### Small-signal equivalent model of $M_1$\nUsing the standard small-signal MOSFET model (with body terminal):\n\n- **Transconductance:** $g_m = \\dfrac{\\partial I_D}{\\partial V_{GS}} = \\mu_n C_{ox}(W/L)(V_{GS}-V_{th})$\n- **Output resistance:** $r_o = \\dfrac{1}{\\lambda I_D}$\n- **Body transconductance:** $g_{mb} = \\dfrac{\\partial I_D}{\\partial V_{BS}} = \\frac{\\gamma g_m}{2\\sqrt{2\\phi_F+V_{SB}}}$\n\n**Crucial point:** The body terminal is biased by a DC source $V_b$, so for AC analysis $v_b = 0$ (AC ground). The source is also grounded, so $v_s = 0$. Hence:\n$$v_{bs} = v_b - v_s = 0$$\nThe body-effect current source $g_{mb}v_{bs}$ **vanishes** in this particular topology because both source and body are AC grounds.\n\nThe small-signal drain current is therefore:\n$$i_d = g_m v_{gs} = g_m v_{in}$$\n\n### Voltage gain\nApplying KCL at the output node ($V_{out}$):\n$$v_{out} = -i_d \\left(R_D \\parallel r_o\\right) = -g_m v_{in} \\left(R_D \\parallel r_o\\right)$$\n\nSo the **small-signal voltage gain** is:\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m \\left(R_D \\parallel r_o\\right)}$$\n\nIf $r_o \\gg R_D$ (often a good approximation when $R_D$ is not too large), this simplifies to:\n$$\\boxed{A_v \\approx -g_m R_D}$$\n\nThe negative sign indicates a **180° phase inversion**, characteristic of the common-source stage.\n\n### Input and Output Impedance\n- **Input resistance:** The MOSFET gate draws zero DC current and (ideally) zero small-signal current:\n  $$R_{in} = \\infty$$\n  *(Practically, if a DC bias resistor $R_G$ is used, $R_{in} = R_G$, and $C_1$ forms a high-pass filter with $R_G$ with lower cutoff $f_L = 1/(2\\pi R_G C_1)$.)*\n\n- **Output resistance:** Looking back into the drain node:\n  $$R_{out} = R_D \\parallel r_o$$\n\n---\n\n## 3. Summary of Key Features\n\n| Feature | Expression / Comment |\n|--------|---------------------|\n| **Topology** | Common-source (CS) with capacitive input coupling |\n| **DC condition** | $C_1$ open; $V_G$ set externally; $I_D$ set by $V_{GS}$ and $V_{th}(V_b)$ |\n| **Body effect** | $V_{th}$ is modulated by $V_{SB}=-V_b$; $g_{mb}$ exists in model but $v_{bs}=0$ so it does not add a current source at AC |\n| **Gain** | $A_v \\approx -g_m R_D$ (or exactly $-g_m(R_D\\parallel r_o)$) |\n| **Phase** | $-180^\\circ$ |\n| **Coupling capacitor $C_1$** | Blocks DC; passes AC; with bias resistance $R_G$ sets lower cutoff $f_L$ |\n| **Role of $V_b$** | Controls $V_{th}$ via body effect, thereby adjusting the DC operating point ($I_D$, $g_m$) and the gain |\n\n---\n\n### Quick Design Insight\nIf you want to **maximize gain**:\n- Increase $R_D$ (but keep $V_{out,DC}$ above $V_{GS}-V_{th}$ to stay in saturation).\n- Increase $g_m$ by increasing $W/L$ or by raising $I_D$ (through $V_{GS}$).\n- Note that $V_b < 0$ (for NMOS) raises $V_{th}$ and therefore **reduces** $I_D$ and $g_m$ for a fixed $V_{GS}$; thus $V_b$ can be used for **threshold tuning** or for reducing leakage.\n\nIf the problem specifically asks for the **transfer function including $C_1$** with a gate bias resistor $R_G$ (omitted in the drawing but required for DC stability), the gain becomes frequency-dependent:\n$$A_v(s) = \\frac{-g_m R_D}{1+g_m R_D} \\cdot \\frac{s}{s+\\omega_L} \\approx -g_m R_D \\cdot \\frac{s}{s+\\omega_L}$$\nwhere $\\omega_L = \\frac{1}{R_G C_1}$ is the high-pass corner frequency. At high frequencies ($\\omega \\gg \\omega_L$), $A_v \\to -g_m R_D$.",
        "format": "markdown",
        "sha256": "9474359d55f16ad76fc488b3df6bc775b99bf95a2f561e197a91f02c1c8a4fb1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections: the input is coupled to the source, which is directly shorted to ground, while the gate is biased by Vb. It instead treats the circuit as a common-source stage with gate input and predicts nonzero gain.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 15434,
        "total_tokens": 17747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 15434,
        "total_tokens": 17747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **common-source (CS) amplifier** with resistive load ($R_D$), input AC coupling ($C_1$), and a **4-terminal n-channel MOSFET** ($M_1$) whose bulk/body is driven by an independent DC voltage $V_b$.\n\nBelow is a complete analysis.\n\n---\n\n## 1. Circuit Identification & Assumptions\n\n| Component | Role |\n|-----------|------|\n| $M_1$ | n-channel MOSFET (Drain at $V_{out}$, Source grounded, Gate at $C_1$, Body at $V_b$) |\n| $R_D$ | Drain load resistor |\n| $C_1$ | Input coupling capacitor (open at DC, short at signal frequency $\\omega$) |\n| $V_{in}$ | Small-signal AC source (with $V_{in,DC}=0$) |\n| $V_b$ | DC body/bulk voltage (creates a source-to-body voltage $V_{SB}$) |\n\n**Key assumption:** A DC gate-bias network (not shown) fixes $V_G$ so that $M_1$ operates in **saturation**.\n\nBecause $C_1$ blocks DC, the DC gate voltage is set externally; for AC analysis we treat $C_1$ as a short, so $v_g = v_{in}$.\n\n---\n\n## 2. DC Operating Point (Body-Effect Analysis)\n\nBecause the source is grounded:\n- $V_S = 0$\n- $V_{SB} = V_S - V_b = -V_b$  (must be $\\ge 0$ to keep the p-n body-source junction reverse-biased $\\Rightarrow V_b \\le 0$)\n\nThe threshold voltage is elevated by the **body effect**:\n$$\nV_{TH} = V_{TH0} + \\gamma\\left(\\sqrt{2\\phi_F + V_{SB}} - \\sqrt{2\\phi_F}\\right)\n$$\n\nIf $V_{GS}$ is held at a fixed DC value by the bias network:\n$$\nI_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\left(V_{GS} - V_{TH}\\right)^2\n$$\n\nThe DC output voltage is:\n$$\nV_{out,DC} = V_{DD} - I_D R_D\n$$\n\n**Physical insight:** Raising $V_{SB}$ (making $V_b$ more negative) increases $V_{TH}$, which reduces $I_D$ for a given $V_{GS}$.\n\n---\n\n## 3. Small-Signal Model ($C_1$ short, $V_{DD}$ & $V_b$ AC grounds)\n\nBecause $V_b$ is a pure DC source, its AC component is zero:\n- $v_{bs} = v_b - v_s = 0 - 0 = 0$\n\nThe transistor small-signal parameters (evaluated at the DC bias point) are:\n- **Transconductance:** $g_m = \\sqrt{2\\mu_n C_{ox}(W/L)I_D} = \\frac{2I_D}{V_{GS}-V_{TH}}$\n- **Body-effect transconductance:** $g_{mb} = \\frac{\\gamma\\, g_m}{2\\sqrt{2\\phi_F + V_{SB}}}$  (defined but **inactive** because $v_{bs}=0$)\n- **Output resistance:** $r_o = \\frac{1}{\\lambda I_D}$\n\nThe small-signal equivalent at the drain node is:\n- A current source $g_m v_{gs} = g_m v_{in}$ from drain $\\to$ source.\n- Resistor $r_o$ between drain and source.\n- Load $R_D$ to AC ground.\n\nApplying KCL at $v_{out}$:\n$$\n\\frac{v_{out}}{R_D} + g_m v_{in} + \\frac{v_{out}}{r_o} = 0\n$$\n\n---\n\n## 4. Voltage Gain\n\n$$\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m \\left(R_D \\parallel r_o\\right)}\n$$\n\nIf channel-length modulation is neglected ($\\lambda \\approx 0 \\Rightarrow r_o \\to \\infty$):\n$$\n\\boxed{A_v = -g_m R_D}\n$$\n\n### Dependence on $V_b$\nAlthough $v_{bs}=0$ in the AC model, **$g_m$ itself depends on $V_b$ through $V_{TH}$**:\n- Increasing $V_{SB}$ $\\Rightarrow$ larger $V_{TH}$ $\\Rightarrow$ smaller $I_D$ (at fixed $V_{GS}$) $\\Rightarrow$ smaller $g_m$ $\\Rightarrow$ **smaller gain magnitude**.\n- Conversely, setting $V_b = V_S = 0$ (body tied to source) gives minimum $V_{TH}$ and maximum gain.\n\n---\n\n## 5. Input / Output Impedance\n\n| Parameter | Expression | Comment |\n|-----------|------------|---------|\n| **Input resistance** $R_{in}$ | $\\infty$ (ideal) | Gate is insulated; $C_1$ is AC short |\n| **Output resistance** $R_{out}$ | $R_D \\parallel r_o \\approx R_D$ | Looking into drain |\n| **Coupling cutoff** $f_C$ | $f_C = \\frac{1}{2\\pi C_1 R_{bias}}$ | If a bias resistor $R_{bias}$ to ground is present; without it, DC is floating but AC gain is unchanged |\n\n---\n\n## 6. Role of $C_1$\n\n- **DC:** Open circuit. Isolates the DC level of $V_{in}$ from the gate. The actual $V_{GS}$ must be established by a separate DC bias network (e.g., a large resistor $R_G$ to $V_{DD}$ or ground, omitted here for clarity).\n- **AC:** Short circuit. Transfers $v_{in}$ directly to the gate: $v_g = v_{in}$.\n\n---\n\n## 7. Summary of Key Equations\n\n$$\nV_{TH}(V_b) = V_{TH0} + \\gamma\\left(\\sqrt{2\\phi_F + (-V_b)} - \\sqrt{2\\phi_F}\\right)\n$$\n\n$$\nI_D = \\frac{1}{2}k_n(V_{GS} - V_{TH})^2, \\quad k_n = \\mu_n C_{ox}\\frac{W}{L}\n$$\n\n$$\ng_m = \\sqrt{k_n I_D} \\quad (\\text{decreases as } V_b \\text{ becomes more negative})\n$$\n\n$$\n\\boxed{A_v = -g_m(R_D \\parallel r_o)}\n$$\n\n---\n\n### Bottom Line\nThis is a **common-source amplifier with body-effect control**. The voltage gain is $-g_mR_D$ (neglecting $r_o$), but $g_m$ is modulated by $V_b$ through the threshold-voltage body effect. The coupling capacitor $C_1$ ensures AC signal coupling without disturbing the DC gate bias required to keep $M_1$ in saturation.",
        "format": "markdown",
        "sha256": "e3bb31eeb4c4b8770f87342482cf28a23630b436cb90c4ace662fe0ce8be2e43"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the input as connected to the gate and analyzes a common-source amplifier. The actual input is coupled to the source node, which is shorted to ground, so the input is shorted and the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 15465,
        "total_tokens": 17778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 15465,
        "total_tokens": 17778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small‑signal equivalent contains **four** parasitic capacitors, but only **two** of them give independent state variables:\n\n* **C_SB** is connected between the source and ground, but the source is at AC ground, so C_SB is shorted and does not affect dynamics.\n* **C_GS**, **C_GD**, and **C_DB** form a single **capacitor loop** (gate–ground–drain–gate), so they contribute only **2** independent voltages, not 3.\n\nThus the only nontrivial nodes are:\n\n1. the **gate node** (after Rₛ), and  \n2. the **drain / V_out node**.\n\nWriting KCL at those two nodes gives a second‑order denominator:\n\n\\[\n\\det\\!\\begin{bmatrix}\n\\frac1{R_s}+s(C_{GS}+C_{GD}) & -sC_{GD}\\\\[4pt]\ng_m-sC_{GD} & \\frac1{R_D}+s(C_{DB}+C_{GD})\n\\end{bmatrix}=0\n\\]\n\nThe determinant is quadratic in \\(s\\).\n\nSo the transfer function \\(V_{out}/V_{in}\\) has:\n\n* **2 poles** (finite)\n* **1 zero** (from the feed‑through path \\(C_{GD}\\) at \\(s=g_m/C_{GD}\\))\n\n### Answer: **2 poles** (with 1 zero).",
        "format": "markdown",
        "sha256": "395420c1103b2a769b87d67a00d74dff7d89dbb7840704ae464cf9c6595a3570"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the capacitor count: C_SB is shorted because both terminals are grounded, while C_GS, C_GD, and C_DB form a loop with only two independent capacitor voltages. The second-order denominator and zero are also consistent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2265,
        "output_tokens": 9607,
        "total_tokens": 11872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2265,
        "output_tokens": 9607,
        "total_tokens": 11872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source amplifier with transistor parasitic capacitances **C<sub>GS</sub>**, **C<sub>GD</sub>**, **C<sub>DB</sub>** and **C<sub>SB</sub>**.\n\nCounting independent energy-storage elements (capacitors) for the small-signal model:\n\n* **C<sub>SB</sub>** is connected between the transistor source and ground. Since the source is directly grounded in this topology, **C<sub>SB</sub> is shorted and does not contribute a dynamic state**.\n* The three remaining capacitors (**C<sub>GS</sub>**, **C<sub>GD</sub>**, **C<sub>DB</sub>**) connect the gate node (after **R<sub>S</sub>**), the drain/output node **V<sub>out</sub>**, and ground. They form a single all-capacitor loop.\n* For an all-capacitor loop, the capacitor voltages are constrained by KVL, so the number of **independent** state variables is:\n\n  3 capacitors − 1 independent loop = **2 state variables**\n\nTherefore the transfer function **V<sub>out</sub>/V<sub>in</sub>** has a second-order denominator (plus one feedforward zero from **C<sub>GD</sub>**).\n\n**Answer: The circuit has 2 poles.**",
        "format": "markdown",
        "sha256": "153e6e0d6a24a4cb7dd685516b191c28711e5d8b21cb123d1074080a9c1b1519"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is shorted by the grounded source and that the remaining three capacitors form a loop with only two independent capacitor voltages, giving two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 14724,
        "total_tokens": 16989,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 14724,
        "total_tokens": 16989,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the small-signal model of a **common-source** stage:\n\n- **Capacitors present:** \\(C_{GS},\\; C_{GD},\\; C_{DB},\\; C_{SB}\\)\n- **Source node:** grounded for AC, so \\(C_{SB}\\) is connected from ground to ground → it is **irrelevant** and can be removed.\n- **Remaining capacitors:** \\(C_{GS},\\; C_{GD},\\; C_{DB}\\).\n\nThese three capacitors form a **single loop**:\n\\[\nC_{GS}\\;\\rightarrow\\;C_{GD}\\;\\rightarrow\\;C_{DB}\\;\\rightarrow\\;C_{GS}\n\\]\nso their voltages are not all independent. The number of **independent state variables** (i.e. independent capacitor voltages) is:\n\n\\[\n3 \\text{ capacitors} - 1 \\text{ loop constraint} = 2.\n\\]\n\nWith the series resistance \\(R_S\\) providing the second dynamic node (the gate node), the nodal equations are two algebraic equations in the two unknown node voltages (\\(V_g\\) and \\(V_{out}\\)).\n\nHence the transfer function \\(V_{out}/V_{in}\\) is a **rational function of order 2**.\n\n\\[\n\\boxed{\\text{The circuit has } \\mathbf{2} \\text{ poles.}}\n\\]\n\n(It also has **1 zero**, the right-half-plane zero due to \\(C_{GD}\\), but the pole count is 2.)",
        "format": "markdown",
        "sha256": "b08c80b9214b6eb87355ab7abd36c7f43796dbaa358968c397b1cbf6dbd51c70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that C_SB is shorted out and the other three capacitors form a loop with only two independent voltages.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 7373,
        "total_tokens": 9638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2265,
        "output_tokens": 7373,
        "total_tokens": 9638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7396,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a **single‑stage NMOS common‑gate amplifier** (or a DC‑feedback biased common‑gate stage) with the following connections:\n\n| Component | Role / Connection |\n|-----------|-------------------|\n| **V<sub>DD</sub>** | DC supply |\n| **R<sub>D</sub>** | Drain load resistor: connects V<sub>DD</sub> to the output node **V<sub>out</sub>** |\n| **M<sub>1</sub>** | NMOS transistor. Its **drain** is at **V<sub>out</sub>**, its **source** is driven by the input voltage **V<sub>in</sub>**, and its **gate** is at node **V<sub>F</sub>** |\n| **R<sub>1</sub>, R<sub>2</sub>** | Resistive divider connected between **V<sub>out</sub>** and ground; the tap is **V<sub>F</sub>** |\n| **V<sub>in</sub>** | Input DC (or AC) source applied to the **source** terminal of M<sub>1</sub> |\n| **V<sub>F</sub>** | Feedback / bias voltage at the **gate** (because I<sub>G</sub> = 0, V<sub>F</sub> is set purely by the divider) |\n| **V<sub>out</sub>** | Output taken at the drain node |\n\nBecause the gate current of a MOSFET is zero, the divider equation is **unloaded**:\n\\[\nV_F = V_{out}\\,\\frac{R_2}{R_1+R_2} \\equiv \\beta\\,V_{out}, \\qquad \\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nThe transistor parameters are assumed to be:\n* Threshold voltage **V<sub>th</sub>**\n* Transconductance parameter **k<sub>n</sub> = μ<sub>n</sub>C<sub>ox</sub>(W/L)**\n* Output resistance **r<sub>o</sub> = 1/(λI<sub>D</sub>)** (often taken as ∞ for simplicity)\n\n---\n\n## 1. DC Operating‑Point (Bias) Analysis\n\nAssume M<sub>1</sub> operates in **saturation**.\n\n### Key voltages / currents\n* Drain current: \\(I_D\\)\n* Gate‑source voltage: \\(V_{GS} = V_F - V_{in}\\)\n* Drain‑source voltage: \\(V_{DS} = V_{out} - V_{in}\\)\n\n### KVL / KCL equations\n1. **Drain node (V<sub>out</sub>)**:\n   \\[\n   V_{out} = V_{DD} - I_D R_D\n   \\]\n\n2. **Divider (gate bias)**:\n   \\[\n   V_F = \\beta V_{out} = \\beta\\,(V_{DD}-I_D R_D)\n   \\]\n\n3. **Saturation current equation** (neglecting channel‑length modulation, λ=0):\n   \\[\n   I_D = \\frac{k_n}{2}\\,(V_{GS}-V_{th})^2\n   \\]\n\n4. **Substitute V<sub>GS</sub>**:\n   \\[\n   V_{GS} = V_F - V_{in} = \\beta(V_{DD}-I_D R_D)-V_{in}\n   \\]\n\n### Self‑consistent equation for I<sub>D</sub>\nSubstituting (4) into (3) gives a **quadratic in I<sub>D</sub>**:\n\\[\nI_D = \\frac{k_n}{2}\\Bigl[\\beta(V_{DD}-I_D R_D)-V_{in}-V_{th}\\Bigr]^2\n\\]\n\nIt is often more convenient to solve for **V<sub>out</sub>** directly:\n\\[\n\\frac{V_{DD}-V_{out}}{R_D} = \\frac{k_n}{2}\\,\\bigl(\\beta V_{out} - V_{in} - V_{th}\\bigr)^2\n\\tag{★}\n\\]\n\n**Procedure:**\n1. Solve (★) for V<sub>out</sub>.\n2. Obtain \\(I_D = (V_{DD}-V_{out})/R_D\\).\n3. Compute \\(V_{GS} = \\beta V_{out} - V_{in}\\).\n4. **Check saturation**:\n   \\[\n   V_{DS} \\ge V_{GS}-V_{th} \\;\\; \\Longrightarrow \\;\\; (V_{out}-V_{in}) \\ge (\\beta V_{out} - V_{in} - V_{th})\n   \\]\n\n> **Physical interpretation:** The divider feeds back a **fraction β of the output voltage to the gate**. If I<sub>D</sub> drifts up (e.g. due to temperature), V<sub>out</sub> falls, V<sub>F</sub> falls, V<sub>GS</sub> falls, and I<sub>D</sub> is pulled back down. Thus this is a **stable negative‑feedback DC bias scheme**.\n\n---\n\n## 2. Small‑Signal (AC) Analysis\n\nTreat **V<sub>in</sub>** as a small AC signal **v<sub>in</sub>** superimposed on its DC value. The DC sources V<sub>DD</sub>, V<sub>F</sub> become AC grounds.\n\n### Small‑signal parameters\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k_n(V_{GS}-V_{th}) \\quad (\\text{at Q‑point})\n\\]\n\n### Small‑signal model (common‑gate stage)\n* **Gate**: \\(v_g = v_F = \\beta v_{out}\\) (because I<sub>g</sub>=0)\n* **Source**: \\(v_s = v_{in}\\)\n* **Drain**: \\(v_d = v_{out}\\)\n* **Transistor**: controlled source \\(g_m v_{gs}\\) from D→S, where\n  \\[\n  v_{gs} = v_g - v_s = \\beta v_{out} - v_{in}\n  \\]\n\n### KCL at drain node (neglect r<sub>o</sub> for simplicity)\n\\[\nv_{out} = -i_d R_D = -g_m v_{gs}R_D = -g_m R_D(\\beta v_{out} - v_{in})\n\\]\n\nSolve for the **closed‑loop voltage gain**:\n\\[\nv_{out}\\bigl(1 + g_m R_D \\beta\\bigr) = g_m R_D\\,v_{in}\n\\]\n\n\\[\n\\boxed{A_v \\equiv \\frac{v_{out}}{v_{in}} = \\frac{g_m R_D}{1+g_m R_D \\beta}}\n\\tag{1}\n\\]\n\nIf the **loop gain** is large (\\(g_m R_D \\beta \\gg 1\\)):\n\\[\nA_v \\approx \\frac{1}{\\beta} = \\frac{R_1+R_2}{R_2}\n\\]\nThis is the classic result of **series‑shunt (voltage‑voltage) negative feedback**: the gain is set by the passive divider, not by the transistor.\n\n### Input Resistance (looking into the source)\nThe source current is \\(i_s = i_d = g_m v_{gs}\\). Using (1):\n\\[\nR_{in} = \\frac{v_{in}}{i_s} = \\frac{1+g_m R_D\\beta}{g_m}\n= \\frac{1}{g_m} + \\beta R_D\n\\tag{2}\n\\]\n\n*Without feedback* (\\(\\beta=0\\)) a common‑gate stage has \\(R_{in}\\approx 1/g_m\\). Here the feedback **increases** the input resistance by \\(\\beta R_D\\).\n\n### Output Resistance\nThe feedback samples the output voltage (shunt sampling), so the closed‑loop output resistance is reduced:\n\\[\nR_{out} \\approx \\frac{R_D}{1+g_m R_D \\beta} \\;\\; \\text{(approximate, neglecting }r_o\\text{)}\n\\]\nMore precisely, including the transistor’s intrinsic \\(r_o\\):\n\\[\nR_{out} \\approx R_D \\parallel \\left[\\frac{r_o}{1+g_m R_s'}\\right] \\quad \\text{with }R_s' \\text{ the source degeneration seen by feedback}\n\\]\n\n---\n\n## 3. Feedback Classification\n\n| Feature | Property |\n|---|---|\n| **Input mixing** | **Series** (V<sub>in</sub> is applied to source; V<sub>F</sub> is applied to gate; the error is V<sub>GS</sub> = V<sub>F</sub> – V<sub>in</sub>) |\n| **Output sampling** | **Shunt** (the divider is connected directly across V<sub>out</sub> and ground) |\n| **Feedback type** | **Voltage‑Voltage (series‑shunt)** negative feedback |\n| **Feedback factor** | \\(\\beta = \\dfrac{R_2}{R_1+R_2}\\) |\n| **Loop gain** | \\(L = g_m R_D \\beta\\) |\n\nBecause of the negative feedback:\n* The **gain is stabilized** against transistor parameter variations.\n* **Input resistance is raised** (Eq. 2).\n* **Output resistance is lowered**.\n* **Distortion is reduced**.\n\n---\n\n## 4. Summary of Key Results\n\n| Quantity | Expression / Value |\n|---|---|\n| **Feedback voltage** | \\(V_F = \\beta V_{out}\\) |\n| **DC Q‑point** | Solve \\(\\displaystyle \\frac{V_{DD}-V_{out}}{R_D}=\\frac{k_n}{2}(\\beta V_{out}-V_{in}-V_{th})^2\\) |\n| **Saturation check** | \\(V_{DS} \\ge V_{GS}-V_{th}\\) |\n| **Small‑signal gain** | \\(\\displaystyle A_v=\\frac{g_m R_D}{1+g_m R_D\\beta}\\approx \\frac{1}{\\beta}\\) (for large loop gain) |\n| **Input resistance** | \\(\\displaystyle R_{in}=\\frac{1}{g_m}+\\beta R_D\\) |\n| **Output resistance** | Reduced below \\(R_D\\) (typically \\(\\approx R_D/(1+L)\\)) |\n\n---\n\n### Final Remarks / Design Insight\n* The resistive divider **R<sub>1</sub>–R<sub>2</sub>** does **not** need to draw current from the gate (I<sub>G</sub>=0), so its Thevenin equivalent is simply a voltage source \\(V_F = \\beta V_{out}\\) with resistance \\(R_1\\parallel R_2\\).\n* If the loop gain \\(L=g_mR_D\\beta\\) is made large (e.g. by choosing small R<sub>1</sub>, R<sub>2</sub> or a high‑g<sub>m</sub> transistor), the circuit acts as a **precision voltage amplifier** whose gain is set almost entirely by the resistor ratio, making it very robust against temperature and process variations of M<sub>1</sub>.\n* For a **pure DC bias analysis**, simply solve equation (★) for V<sub>out</sub>, verify saturation, and compute I<sub>D</sub> and V<sub>GS</sub>. For **AC amplification**, use Eq. (1)–(2).\n\nIf your question requires a specific numeric evaluation, please provide the component values (\\(R_D, R_1, R_2, V_{DD}, V_{th}, k_n\\)) and the DC input level \\(V_{in}\\); then the quadratic (★) can be solved explicitly for the quiescent point.",
        "format": "markdown",
        "sha256": "92820e840fed3869cde428713a9e3576e1441e2980b95f1c4503806339db1bb2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. However, its DC and small-signal equations omit the divider’s loading of the output; the gain should use RD || (R1 + R2), unless R1 + R2 is much larger than RD.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2261,
        "output_tokens": 33871,
        "total_tokens": 36132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2261,
        "output_tokens": 33871,
        "total_tokens": 36132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the figure, the circuit consists of:\n\n* a load resistor **$R_D$** from $V_{DD}$ to the output node $V_{out}$;\n* a resistive divider **$R_1$–$R_2$** sensing $V_{out}$, with the tap labeled **$V_F$**;\n* a MOSFET **$M_1$** whose **gate** is driven by $V_F$, whose **upper terminal** (drain) is at $V_{out}$, and whose **lower terminal** (source) is connected to the input terminal **$V_{in}$** (the arrow indicates the source terminal).\n\nHence $M_1$ operates in a **common‑gate** (input applied to source, output taken at drain) configuration with **series–shunt (voltage) feedback**: the divider feeds back a fraction $\\beta=R_2/(R_1+R_2)$ of $V_{out}$ to the gate.\n\nBelow is a complete DC and small‑signal analysis.\n\n---\n\n## 1. DC Operating Point (Self‑Bias)\n\nLet $V_{IN}$ be the DC value of $V_{in}$.  Because the gate draws no DC current,\n\n$$V_F = V_{out}\\,\\frac{R_2}{R_1+R_2} \\equiv \\beta V_{out}.$$\n\nThe transistor’s gate–source voltage is\n\n$$V_{GS} = V_F - V_{IN} = \\beta V_{out} - V_{IN}.$$\n\nAssuming $M_1$ is in saturation ($V_{DS}\\ge V_{GS}-V_{th}$):\n\n$$I_D = \\frac{1}{2}k_n(V_{GS}-V_{th})^2\n      = \\frac{1}{2}k_n\\bigl(\\beta V_{out}-V_{IN}-V_{th}\\bigr)^2.$$\n\nKCL at $V_{out}$ gives\n\n$$\\frac{V_{DD}-V_{out}}{R_D}\n   = I_D + \\frac{V_{out}}{R_1+R_2}.$$\n\nThese two equations determine $V_{out}$ and $I_D$ for a given $V_{IN}$.  The feedback through $R_1,R_2$ makes the bias **self‑adjusting**: if $I_D$ is too large, $V_{out}$ drops, $V_F$ drops, $V_{GS}$ drops, and $I_D$ is reduced—negative feedback stabilizes the quiescent point.\n\n---\n\n## 2. Small‑Signal Model\n\nReplace $M_1$ by its small‑signal model ($g_m$, $r_o$) and short $V_{DD}$ to ground.\n\n* $v_{in}$ is the small signal at the source;\n* $v_f = \\beta\\,v_{out}$ with $\\beta=R_2/(R_1+R_2)$;\n* $v_{gs}=v_f-v_{in}$.\n\nNodal analysis at $v_{out}$ (drain) yields\n\n$$\\frac{v_{out}}{R_D}+\\frac{v_{out}-v_f}{R_1}\n  +\\frac{v_{out}-v_{in}}{r_o}+g_m(v_f-v_{in})=0.$$\n\nUsing $v_f=\\beta v_{out}$ and noting that $(v_{out}-v_f)/R_1=v_{out}/(R_1+R_2)$, we obtain\n\n$$v_{out}\\!\\left[\\frac{1}{R_D}+\\frac{1}{R_1+R_2}+\\frac{1}{r_o}+g_m\\beta\\right]\n   = v_{in}\\!\\left(g_m+\\frac{1}{r_o}\\right).$$\n\nSolving for the voltage gain $A_v=v_{out}/v_{in}$:\n\n$$\\boxed{%\nA_v = \\frac{g_m+1/r_o}{\\dfrac{1}{R_D}+\\dfrac{1}{R_1+R_2}+\\dfrac{1}{r_o}+g_m\\beta}\n}$$\n\nIf the transistor’s output resistance is large ($r_o\\to\\infty$):\n\n$$A_v \\approx\n\\frac{g_m}{\\dfrac{1}{R_D}+\\dfrac{1}{R_1+R_2}+g_m\\beta}\n= \\frac{g_mR_D(R_1+R_2)}{(R_1+R_2)+R_D+g_mR_2R_D}.$$\n\n---\n\n## 3. Closed‑Loop Gain (Strong Feedback Limit)\n\nIf the open‑loop gain is high ($g_mR_D\\gg 1$ and $g_mR_2R_D\\gg R_1+R_2+R_D$),\n\n$$\\boxed{A_v \\approx \\frac{1}{\\beta} = \\frac{R_1+R_2}{R_2}.}$$\n\nThe circuit therefore behaves as a **non‑inverting voltage amplifier** whose gain is set almost entirely by the resistive divider, not by $g_m$ or $R_D$.  This is the hallmark of **series–shunt negative feedback**:\n\n* **Shunt sampling**: $R_1,R_2$ sense the output voltage $v_{out}$.\n* **Series mixing**: the feedback voltage $v_f$ subtracts from $v_{in}$ at the source–gate loop ($v_{gs}=v_f-v_{in}$).\n\nThe loop gain is negative, confirming stability.\n\n---\n\n## 4. Key Physical Observations\n\n| Feature | Expression / Comment |\n|---|---|\n| **Feedback factor** | $\\beta = R_2/(R_1+R_2)$ |\n| **Ideal closed‑loop gain** | $A_{CL}\\approx 1/\\beta = 1+R_1/R_2$ |\n| **Input resistance (looking into source)** | $R_{in}\\approx \\dfrac{1}{g_m}(1+g_mR_D')$ with $R_D'=R_D\\parallel(R_1+R_2)$; feedback raises it. |\n| **Output resistance** | Reduced by the shunt feedback: $R_{out}\\approx R_D\\parallel \\left[\\dfrac{1}{g_m\\beta}\\right]$ (roughly). |\n| **DC stability** | $V_{GS}$ is “self‑correcting” via $V_{out}$; the circuit is robust against $V_{th}$ variations. |\n\n---\n\n## 5. Summary\n\nThe figure depicts a **MOSFET common‑gate amplifier with resistive voltage feedback** ($R_1,R_2$) from $V_{out}$ to the gate.  The DC operating point is obtained by solving the self‑consistent $I_D(V_{GS})$ and KCL equations; the small‑signal voltage gain is\n\n$$A_v \\approx \\frac{R_1+R_2}{R_2}$$\n\nwhen the transistor’s intrinsic gain is large.  The feedback reduces sensitivity to $g_m$ and $R_D$, stabilizes the bias point, and sets the closed‑loop gain precisely by the resistor ratio—exactly the purpose of series–shunt feedback in analog design.",
        "format": "markdown",
        "sha256": "e43b6df90cc77fd61b810c1eb2eea750f161df3dc6eb367bc6838843aab85430"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output divider feedback to the gate, and negative-feedback action. Its gain expression and large-loop-gain limit are consistent with the golden solution; secondary details do not affect the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 24766,
        "total_tokens": 27027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 24766,
        "total_tokens": 27027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22317,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification**\n\nThe figure is a **single‑transistor NMOS common‑source amplifier** with a **resistive feedback network** \\((R_1,R_2)\\).\n\n| Element | Role |\n|---|---|\n| \\(M_1\\) | NMOS (arrow on the source). Gate = \\(V_{\\text{in}}\\); Source = node \\(V_F\\); Drain = node \\(V_{\\text{out}}\\). |\n| \\(R_D\\) | Drain load to \\(V_{DD}\\). |\n| \\(R_1\\) | Feedback resistor between drain (\\(V_{\\text{out}}\\)) and source (\\(V_F\\)). |\n| \\(R_2\\) | Source degeneration / feedback resistor to ground. |\n| \\(V_F\\) | DC+AC voltage at the source node; it is the **feedback voltage** fed back in series with the gate input. |\n\nThe key topological feature is **series–shunt feedback**:\n\n* **Shunt (voltage) sampling** at the output: \\(R_1\\)–\\(R_2\\) senses \\(V_{\\text{out}}\\).\n* **Series mixing** at the input: the error signal is \\(V_{gs}=V_{\\text{in}}-V_F\\).\n\nBelow is a complete DC and small‑signal analysis.\n\n---\n\n## 1. DC operating‑point analysis\n\nAssume \\(M_1\\) operates in **saturation** and neglect channel‑length modulation (\\(\\lambda=0\\Rightarrow r_o=\\infty\\)).  \nDefine\n\n\\[\nI_D = \\frac{1}{2}k_n\\,(V_{GS}-V_{th})^2 ,\\qquad \nk_n=\\mu_nC_{ox}(W/L),\\qquad \nV_{GS}=V_{\\text{in}}-V_F .\n\\]\n\n### KCL equations\n\n**Node \\(V_{\\text{out}}\\) (drain):**\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}=I_D+\\frac{V_{\\text{out}}-V_F}{R_1}\\tag{1}\n\\]\n\n**Node \\(V_F\\) (source):**\n\n\\[\nI_D+\\frac{V_{\\text{out}}-V_F}{R_1}=\\frac{V_F}{R_2}\\tag{2}\n\\]\n\nAdding (1) and (2) eliminates \\(I_D\\) and the current through \\(R_1\\):\n\n\\[\n\\boxed{\\frac{V_{DD}-V_{\\text{out}}}{R_D}=\\frac{V_F}{R_2}}\n\\;\\;\\Longrightarrow\\;\\;\n\\boxed{V_{\\text{out}}=V_{DD}-\\frac{R_D}{R_2}V_F}\\tag{3}\n\\]\n\nThis is the **DC feedback equation**: an increase in \\(I_D\\) lowers \\(V_{\\text{out}}\\), which raises \\(V_F\\) via (3); the larger \\(V_F\\) reduces \\(V_{GS}\\) and therefore pushes \\(I_D\\) back down—**negative feedback** that stabilizes the Q‑point.\n\nUsing (2) to eliminate \\(I_D\\) and substituting (3) gives a single nonlinear equation for \\(V_F\\):\n\n\\[\n\\frac{1}{2}k_n\\bigl(V_{\\text{in}}-V_F-V_{th}\\bigr)^2\n= \\frac{V_F}{R_2}-\\frac{V_{\\text{out}}-V_F}{R_1}\n= \\frac{V_F}{R_2}-\\frac{V_{DD}-V_F(1+R_D/R_2)}{R_1}.\n\\]\n\nOnce \\(V_F\\) is found, the DC quantities follow immediately:\n\n\\[\nV_{GS}=V_{\\text{in}}-V_F,\\qquad \nI_D=\\frac{1}{2}k_n(V_{GS}-V_{th})^2,\\qquad \nV_{DS}=V_{\\text{out}}-V_F .\n\\]\n\n**Saturation check:** require \\(V_{DS}\\ge V_{GS}-V_{th}\\).\n\n---\n\n## 2. Small‑signal analysis\n\nReplace \\(M_1\\) by its small‑signal model: a voltage‑controlled current source \\(g_m v_{gs}\\) (drain→source) with\n\n\\[\ng_m = k_n(V_{GS}-V_{th}),\\qquad v_{gs}=v_{\\text{in}}-v_f .\n\\]\n\nResistor \\(R_D\\) is connected to AC ground (\\(V_{DD}\\) shorted).\n\n### Nodal equations\n\n**Drain node (\\(v_{\\text{out}}\\)):**\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}+\\frac{v_{\\text{out}}-v_f}{R_1}+g_m v_{gs}=0\\tag{4}\n\\]\n\n**Source node (\\(v_f\\)):**\n\n\\[\n\\frac{v_f-v_{\\text{out}}}{R_1}+\\frac{v_f}{R_2}-g_m v_{gs}=0\\tag{5}\n\\]\n\nAdding (4) and (5) eliminates \\(g_m v_{gs}\\):\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}+\\frac{v_f}{R_2}=0\n\\;\\;\\Longrightarrow\\;\\;\n\\boxed{v_f=-\\frac{R_2}{R_D}\\,v_{\\text{out}}}\\tag{6}\n\\]\n\n(Equation (6) is the AC version of the DC feedback relation (3).)\n\nNow use (4) with \\(v_{gs}=v_{\\text{in}}-v_f\\):\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}+\\frac{v_{\\text{out}}-v_f}{R_1}+g_m(v_{\\text{in}}-v_f)=0 .\n\\]\n\nSubstitute \\(v_f\\) from (6) and solve for the **voltage gain**:\n\n\\[\n\\boxed{\nA_v \\equiv \\frac{v_{\\text{out}}}{v_{\\text{in}}}\n= -\\,\\frac{g_m R_D R_1}{g_m R_1 R_2 + R_1 + R_2 + R_D}\n}\\tag{7}\n\\]\n\n### Useful approximations\n\n* **Large \\(g_m\\)** (\\(g_mR_1R_2 \\gg R_1+R_2+R_D\\)):\n\n\\[\n\\boxed{A_v \\approx -\\frac{R_D}{R_2}}\\tag{8}\n\\]\n\nThe gain is set by the **resistor ratio** \\(R_D/R_2\\), exactly as in a common‑source stage with unbypassed source degeneration—here \\(R_2\\) is the degeneration resistor.\n\n* **Very strong feedback** (\\(R_1\\to\\infty\\), i.e. open feedback branch):\n\n\\[\nA_v \\approx -\\frac{g_mR_D}{1+g_mR_2}\\approx -\\frac{R_D}{R_2},\n\\]\n\nthe classic common‑source amplifier with source resistor \\(R_2\\).\n\n* **\\(R_1\\to 0\\)** (drain shorted to source):\n\n\\(A_v\\to 0\\); the transistor cannot develop gain because \\(v_{DS}\\approx 0\\).\n\n---\n\n## 3. Input / output resistances\n\n* **Input resistance:** The gate draws zero DC/small‑signal current.\n\n\\[\n\\boxed{R_{\\text{in}}=\\infty}\n\\]\n\n* **Output resistance:** Set \\(v_{\\text{in}}=0\\) (\\(v_g=0\\Rightarrow v_{gs}=-v_f\\)), apply a test voltage \\(v_t\\) at \\(V_{\\text{out}}\\), and find the current \\(i_t\\) drawn from the source.\n\nUsing (5) with \\(v_{\\text{in}}=0\\) gives\n\n\\[\nv_f=\\frac{v_t}{1+g_mR_1+R_1/R_2}.\n\\]\n\nThen\n\n\\[\ni_t = \\frac{v_t}{R_D}+\\frac{v_t-v_f}{R_1}-g_m v_f\n      = v_t\\!\\left(\\frac{1}{R_D}+\\frac{1}{R_1+R_2+g_mR_1R_2}\\right).\n\\]\n\nHence\n\n\\[\n\\boxed{\nR_{\\text{out}} = R_D \\;\\parallel\\; \\bigl[\\,R_1+R_2(1+g_mR_1)\\,\\bigr]\n}\\tag{9}\n\\]\n\nBecause \\(g_mR_1\\gg 1\\) in practice, the second branch is very large (\\(\\approx g_mR_1R_2\\)), so\n\n\\[\nR_{\\text{out}} \\approx R_D .\n\\]\n\n---\n\n## 4. Physical interpretation / feedback view\n\n| Feature | Consequence |\n|---|---|\n| **DC feedback** via \\(R_1,R_2\\) | Stabilizes \\(I_D\\) and \\(V_{GS}\\); the Q‑point is largely insensitive to \\(k_n\\) or \\(V_{th}\\) variations. |\n| **Series mixing** (\\(V_{gs}=V_{\\text{in}}-V_F\\)) | Raises input resistance (already \\(\\infty\\) for MOS) and makes the closed‑loop gain depend on passive resistors rather than \\(g_m\\). |\n| **Shunt (voltage) sampling** | Lowers the effective output resistance; here the dominant path to ground is still \\(R_D\\). |\n| **Gain expression (8)** | The circuit behaves as a **precision inverting amplifier** with gain \\(\\approx -R_D/R_2\\), useful when a stable, transistor‑independent gain is desired. |\n\n---\n\n### Summary of key results\n\n\\[\n\\boxed{\n\\begin{aligned}\n\\text{DC:}&\\quad \\frac{V_{DD}-V_{\\text{out}}}{R_D}=\\frac{V_F}{R_2},\\qquad\nI_D=\\frac12k_n(V_{\\text{in}}-V_F-V_{th})^2 \\\\[4pt]\n\\text{Small‑signal gain:}&\\quad \nA_v=-\\frac{g_mR_DR_1}{g_mR_1R_2+R_1+R_2+R_D}\n\\;\\approx\\;-\\frac{R_D}{R_2} \\\\[4pt]\nR_{\\text{in}}&=\\infty, \\qquad\nR_{\\text{out}}=R_D\\parallel\\bigl[R_1+R_2(1+g_mR_1)\\bigr].\n\\end{aligned}\n}\n\\]\n\nIf you have **specific numerical values** for \\(V_{DD}, R_D, R_1, R_2, k_n, V_{th}\\) and the DC value of \\(V_{\\text{in}}\\), I can solve the DC equation explicitly for \\(I_D\\), \\(V_F\\) and \\(V_{\\text{out}}\\), and compute the exact numerical gain. Just provide the component values!",
        "format": "markdown",
        "sha256": "c167e9c43122a436386a22cb466b0a19325c0d987dbbbf856eec58386c11191e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the essential topology: the actual input is at the source and the output divider feeds the gate, but it places the input at the gate and feedback at the source. Its resulting inverting gain and detailed analysis therefore do not describe the circuit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 40871,
        "total_tokens": 43132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33309,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2261,
        "output_tokens": 40871,
        "total_tokens": 43132,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33309,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure shows a **single-stage common-source (CS) amplifier with an active current-source load** (often called an *active-loaded common-source stage*).\n\nBelow is a systematic analysis: circuit identification, DC biasing conditions, large-signal behavior, and small-signal performance.\n\n---\n\n### 1. Circuit Identification\n\n| Transistor | Terminal Connections | Type (assumed from standard convention) | Role |\n|------------|---------------------|----------------------------------------|------|\n| **M₁** | Source → $V_{DD}$, Gate → $V_{in}$, Drain → $V_{out}$ | **PMOS** (arrow on source; body/n-well tied to $V_{DD}$) | **Input device** (common-source) |\n| **M₂** | Drain → $V_{out}$, Gate → $V_b$ (DC bias), Source → GND | **NMOS** (arrow on source; body/p-sub tied to GND) | **Active load / current source** |\n\nBecause $V_{DD}$ and GND are AC grounds, M₁’s source is at AC ground and M₂’s source is at AC ground. Thus:\n\n* **M₁** is a **PMOS common-source** transistor: $v_{in}$ modulates the current $I_{D1}$ that flows from $V_{DD}$ to $V_{out}$.\n* **M₂** is a **diode-less NMOS current source**: Its gate is held at a constant bias $V_b$, so it sinks a nearly constant current $I_{D2}$ from $V_{out}$ to ground.\n\nThe two devices are stacked between the supplies; the shared drain node is the output $V_{out}$.\n\n---\n\n### 2. DC Operating Point & Saturation Conditions\n\nFor high gain, **both transistors must operate in saturation**.\n\n**M₂ (NMOS load)**  \n$$V_{GS2} = V_b, \\qquad V_{DS2} = V_{out}$$\nSaturation requires:\n$$\\boxed{V_{out} \\ge V_b - V_{thn}} \\tag{1}$$\nCurrent:\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b - V_{thn})^2 \\left(1+\\lambda_n V_{out}\\right) \\approx I_0$$\n\n**M₁ (PMOS input)**  \n$$V_{SG1} = V_{DD} - V_{in}, \\qquad V_{SD1} = V_{DD} - V_{out}$$\nSaturation requires:\n$$\\boxed{V_{out} \\le V_{in} + |V_{thp}|} \\tag{2}$$\nCurrent:\n$$I_{D1} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{DD}-V_{in}-|V_{thp}|)^2 \\left(1+\\lambda_p (V_{DD}-V_{out})\\right)$$\n\n**KCL at $V_{out}$:**  \nBecause no DC current leaves the output node (open-circuit load),\n$$\\boxed{I_{D1} = I_{D2} = I_D} \\tag{3}$$\n\nEquations (1)–(3) set the DC quiescent point $V_{out,Q}$. In practice, $V_b$ is chosen so that $I_0$ equals the desired bias current, and $V_{in}$ is set (or adjusted) so that $V_{out,Q}$ sits in the middle of the high-gain region.\n\n---\n\n### 3. Large-Signal Voltage Transfer Characteristic (VTC)\n\n| Region | Condition | Behavior of $V_{out}$ |\n|--------|-----------|----------------------|\n| **M₁ off / M₂ in triode** | $V_{in} \\approx V_{DD}$ $\\Rightarrow V_{SG1} \\approx 0$ | $I_{D1} \\approx 0$. M₂ tries to sink $I_0$ but cannot; $V_{out}$ collapses to near **0 V** (actually $\\approx 0$, limited by M₂’s triode resistance). |\n| **Both saturated (high-gain)** | $V_{in}$ in moderate range | Small $\\Delta V_{in}$ causes large $\\Delta I_{D1}$. Since $I_{D2}$ is “stiff,” $V_{out}$ changes sharply. |\n| **M₁ deep triode / M₂ saturated** | $V_{in} \\approx 0$ $\\Rightarrow V_{SG1} \\approx V_{DD}$ | M₁ supplies very large current; $V_{out}$ is pulled up to near **$V_{DD}$** (limited by M₁’s $R_{on}$). |\n\nThe VTC is **inverting** (like a standard CMOS inverter), but because the gates are separate, the switching threshold and gain are independently controlled by $V_{in}$ and $V_b$.\n\n---\n\n### 4. Small-Signal Analysis (Key Result)\n\nAssume both devices are in saturation and $V_b$ is pure DC (AC ground).\n\n**Small-signal parameters:**\n* $g_{m1} = \\mu_p C_{ox}(W/L)_1 (V_{SG1}-|V_{thp}|) = \\frac{2I_D}{V_{SG1}-|V_{thp}|}$\n* $r_{o1} = \\frac{1}{\\lambda_p I_D}$  (resistance between $V_{out}$ and AC ground $V_{DD}$)\n* $r_{o2} = \\frac{1}{\\lambda_n I_D}$  (resistance between $V_{out}$ and ground)\n\nBecause sources are at fixed DC potentials ($V_{DD}$ and GND), **body effect is absent** ($V_{SB}=0$ for both).\n\n**Equivalent circuit at $V_{out}$:**\n* Controlled source: $g_{m1}v_{sg1} = g_{m1}(-v_{in})$ (since $v_s=0$ AC, $v_g=v_{in}$).\n* $r_{o1}$ and $r_{o2}$ are in parallel between $V_{out}$ and ground.\n\nApplying KCL at $V_{out}$:\n$$v_{out}\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right) = -g_{m1}v_{in}$$\n\n**Voltage gain:**\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}\\left(r_{o1} \\parallel r_{o2}\\right)} \\tag{4}$$\n\n**Input resistance:** $R_{in} = \\infty$ (MOS gate is insulated).\n\n**Output resistance:**\n$$\\boxed{R_{out} = r_{o1} \\parallel r_{o2}} \\tag{5}$$\n\nSince $r_o \\propto 1/I_D$, the gain is essentially the **intrinsic gain of the transistor**:\n$$|A_v| = g_{m1}r_o \\approx \\frac{2}{\\lambda V_{ov}}$$\nTypical values range from $\\sim 20$ to $\\sim 100$ (26–40 dB) in modern processes, far exceeding a resistive-loaded CS stage.\n\n---\n\n### 5. Design Trade-Offs & Key Features\n\n| Feature | Expression / Implication |\n|---------|--------------------------|\n| **Gain polarity** | Negative ($V_{out}$ falls when $V_{in}$ rises). |\n| **Gain magnitude** | Very high due to $r_o$ load instead of $R_D$. |\n| **Output swing** | High-gain region is narrow: $V_{out}$ must satisfy (1) and (2). The usable linear range is roughly $V_b-V_{thn} \\le V_{out} \\le V_{in}+|V_{thp}|$. |\n| **Bandwidth** | $f_{-3dB} \\approx \\frac{1}{2\\pi R_{out}C_L}$ (dominated by high $R_{out}$ and load cap $C_L$). |\n| **Noise / PSRR** | M₂ contributes thermal/flicker noise as a current source; $V_{DD}$ noise is rejected by M₁’s common-source topology only to the extent of supply rejection ratio (not perfect). |\n| **Biasing** | $V_b$ sets $I_D$; $V_{in,DC}$ sets $V_{out,Q}$ via (3). Often $V_b$ is generated by a current mirror. |\n\n---\n\n### 6. Summary\n\nThis is a **high-gain, single-stage active-loaded common-source amplifier**:\n* **M₁** (PMOS) converts $v_{in}$ to a signal current.\n* **M₂** (NMOS, biased by $V_b$) presents a high incremental resistance $r_{o2}$, so the small signal develops a large voltage at $V_{out}$.\n* The small-signal voltage gain is $A_v = -g_{m1}(r_{o1}||r_{o2})$.\n* The circuit achieves high gain at the cost of reduced output swing and a narrow high-gain operating region.\n\nIf one replaces M₂ with a diode connection ($V_b = V_{out}$) or with a resistor $R_D$, the gain drops to $\\approx -g_{m1}/g_{m2}$ or $-g_{m1}R_D$, respectively—illustrating why the active current-source load is so effective in analog IC design.",
        "format": "markdown",
        "sha256": "53ded0550e6392b516a11a645efa6c72b2d59e6a60abec2f596cbb13461caae9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer fundamentally misidentifies the circuit as a PMOS common-source stage with an NMOS active load. M1 is actually an NMOS source follower with its source at Vout, so the claimed inverting high gain is incorrect.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2105,
        "output_tokens": 17893,
        "total_tokens": 19998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2105,
        "output_tokens": 17893,
        "total_tokens": 19998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **single-stage common‑source (CS) amplifier with an NMOS current‑source (active) load**.\n\n* **M₁** is a **PMOS** transistor: its source is tied to the supply **V_DD**, its gate is the signal input **V_in**, and its drain is the output node **V_out**.\n* **M₂** is an **NMOS** transistor: its drain is **V_out**, its source is ground, and its gate is biased by a DC voltage **V_b**.\n\nBecause the two devices are stacked in series, the DC current through them is identical:\n\\[\nI_{D1}=I_{D2}\\equiv I_D .\n\\]\n\nBelow is a systematic analysis: DC bias, small‑signal model, gain, and design insights.\n\n---\n\n## 1. DC Analysis\n\n### 1.1 Transistor equations (saturation)\nAssume both transistors operate in saturation (the required condition for high gain).\n\n**PMOS M₁**  \n\\[\nV_{SG1}=V_{DD}-V_{in},\\qquad V_{SD1}=V_{DD}-V_{out}\n\\]\n\\[\nI_D=\\frac{1}{2}\\mu_p C_{ox}\\!\\left(\\frac{W}{L}\\right)_1\\!\\bigl(V_{SG1}-|V_{thp}|\\bigr)^2\n\\Bigl(1+\\lambda_p V_{SD1}\\Bigr)\n\\]\n\n**NMOS M₂**  \n\\[\nV_{GS2}=V_b,\\qquad V_{DS2}=V_{out}\n\\]\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\!\\left(\\frac{W}{L}\\right)_2\\!\\bigl(V_{GS2}-V_{thn}\\bigr)^2\n\\Bigl(1+\\lambda_n V_{DS2}\\Bigr)\n\\]\n\n### 1.2 Role of the two control voltages\n* **V_b** sets the bias current of the lower device:\n  \\[\n  I_D \\approx \\frac{1}{2}k_n(V_b-V_{thn})^2,\\qquad k_n=\\mu_n C_{ox}(W/L)_2 .\n  \\]\n  Because M₂’s gate is held at a constant DC level, M₂ acts as a **current sink**.\n\n* **V_in** (more precisely its DC component \\(V_{IN}\\)) is chosen so that M₁ delivers exactly the same current:\n  \\[\n  V_{SG1}-|V_{thp}| = \\sqrt{\\frac{k_n}{k_p}}\\;(V_b-V_{thn}).\n  \\]\n  Thus the quiescent point of **V_out** is set by the interaction of the two devices.\n\n### 1.3 Saturation conditions\nFor the amplifier to have high small‑signal gain, both devices must remain saturated:\n\n| Device | Saturation requirement |\n|--------|------------------------|\n| **M₂ (NMOS)** | \\(V_{out} \\ge V_b - V_{thn} \\equiv V_{ov2}\\) |\n| **M₁ (PMOS)** | \\(V_{SD1} \\ge V_{SG1}-|V_{thp}| \\;\\Rightarrow\\; V_{out} \\le V_{IN}+|V_{thp}|\\) |\n\nHence the allowable DC range for **V_out** is:\n\\[\n\\boxed{V_{ov2} \\;\\le\\; V_{out} \\;\\le\\; V_{IN}+|V_{thp}| } .\n\\]\n\n*Without channel‑length modulation (\\(\\lambda=0\\)) the current equations do not depend on \\(V_{out}\\); therefore the two currents match at exactly one value of \\(V_{in}\\). With \\(\\lambda>0\\) the finite output resistances pin \\(V_{out}\\) to a unique operating point.*\n\n---\n\n## 2. Small‑Signal Equivalent Circuit\n\nFor AC analysis:\n\n* **V_DD** is a DC supply → **AC ground**.\n* **V_b** is a DC bias → **AC ground** (so \\(v_{gs2}=0\\)).\n* **Body effects are absent** because each transistor’s body is tied to its source (M₁ body to V_DD, M₂ body to GND).\n\nThe small‑signal model therefore contains:\n\n* **M₁ (PMOS)**: transconductance \\(g_{m1}\\) with source at AC ground; control voltage \\(v_{sg1}=-v_{in}\\). The model is a current source \\(g_{m1}v_{in}\\) from drain to source plus output resistance \\(r_{o1}\\).\n* **M₂ (NMOS)**: because \\(v_{gs2}=0\\), it contributes **no** \\(g_m\\) current; it is simply an output resistance \\(r_{o2}\\) from **V_out** to ground.\n\n\\[\ng_{m1}=\\frac{2I_D}{V_{ov1}}=\\mu_p C_{ox}(W/L)_1(V_{SG1}-|V_{thp}|),\\qquad\nr_{o1}=\\frac{1}{\\lambda_p I_D},\\qquad\nr_{o2}=\\frac{1}{\\lambda_n I_D}.\n\\]\n\nThe equivalent circuit at node **V_out** is:\n\n```\n        Vout\n         |\n    +----+----+\n    |         |\n   g_m1·v_in  r_o1\n    |         |\n   GND       GND\n    |         |\n    +----+----+\n         |\n        r_o2\n         |\n        GND\n```\n\n*(The current source is oriented so that a positive \\(v_{in}\\) reduces the current sourced to V_out, pulling V_out downward.)*\n\n---\n\n## 3. Voltage Gain and Output Resistance\n\nApplying KCL at **V_out** (open load, so external current = 0):\n\n\\[\ng_{m1}v_{in} + \\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} = 0\n\\]\n\n\\[\n\\boxed{ A_v \\equiv \\frac{v_{out}}{v_{in}} = -g_{m1}\\,(r_{o1}\\parallel r_{o2}) }\n\\]\n\nThe **output resistance** of the stage is:\n\n\\[\n\\boxed{ R_{out} = r_{o1} \\parallel r_{o2} = \\frac{1}{(\\lambda_p+\\lambda_n)I_D} } .\n\\]\n\nUsing \\(g_{m1}r_{o1}=2/(V_{ov1}\\lambda_p)\\) (the intrinsic gain of M₁), the magnitude can also be written as:\n\n\\[\n|A_v| = \\frac{g_{m1}}{(\\lambda_p+\\lambda_n)I_D}\n      = \\frac{2}{V_{ov1}(\\lambda_p+\\lambda_n)} .\n\\]\n\n### Key points about the gain\n* **Inverting**: \\(A_v < 0\\). A rise in \\(V_{in}\\) weakens M₁, so M₂ pulls **V_out** down.\n* **High gain**: Because both transistors are active loads (current sources with high \\(r_o\\)), \\(|A_v|\\) is typically 20–60 dB, much larger than a resistive‑load CS stage.\n* **Gain is independent of \\(I_D\\)** to first order (it cancels), but depends inversely on overdrive \\(V_{ov1}\\) and on \\(\\lambda\\).\n\n---\n\n## 4. DC Transfer Characteristic (Sketch)\n\nIgnoring \\(\\lambda\\) for simplicity, the behavior of \\(V_{out}(V_{in})\\) is:\n\n| Region of \\(V_{in}\\) | State of M₁ | State of M₂ | Result for \\(V_{out}\\) |\n|----------------------|-------------|-------------|------------------------|\n| **High** (\\(V_{in}\\ge V_{DD}-|V_{thp}|\\)) | Cutoff / weak | Triode (or sat. with \\(I_D\\approx 0\\)) | \\(V_{out}\\approx 0\\) |\n| **Intermediate** (\\(V_{in}=V_{IN}^*\\)) | Saturation | Saturation | **High‑gain region**; \\(V_{out}\\) is set by \\(\\lambda\\) (or by external loading) |\n| **Low** (\\(V_{in}\\ll V_{DD}-|V_{thp}|\\)) | Triode (current limited by M₂) | Saturation | \\(V_{out}\\) high, near \\(V_{DD}\\) but less than it |\n\nThe “sweet spot” for analog amplification is the narrow region where **both are saturated**. In that region a small change \\(\\Delta V_{in}\\) produces a large \\(\\Delta V_{out}\\) because the two high‑resistance devices must exchange only a tiny current mismatch.\n\n---\n\n## 5. Summary of Circuit Function\n\n| Feature | Expression / Value |\n|---------|-------------------|\n| **Topology** | Common‑source (CS) amplifier with NMOS current‑sink load |\n| **Input device** | PMOS M₁ (gate = \\(V_{in}\\)) |\n| **Load / current source** | NMOS M₂ (gate = fixed \\(V_b\\)) |\n| **DC current** | \\(I_D = \\frac{1}{2}k_n(V_b-V_{thn})^2\\) |\n| **Small‑signal gain** | \\(\\displaystyle A_v=-g_{m1}(r_{o1}\\parallel r_{o2})\\) |\n| **Output resistance** | \\(\\displaystyle R_{out}=r_{o1}\\parallel r_{o2}\\) |\n| **Gain sign** | Inverting |\n| **Key design knob** | \\(V_b\\) sets bias current; \\(V_{IN}\\) sets operating point; \\((W/L)\\) ratios set \\(g_m\\) and overdrive. |\n\n### Practical design notes\n1. **Biasing**: \\(V_{in}\\) must be DC‑biased so that \\(V_{out,DC}\\) lies comfortably inside \\([V_{ov2},\\,V_{IN}+|V_{thp}|]\\), typically near mid‑supply for maximum symmetrical swing.\n2. **Channel length**: Longer \\(L\\) reduces \\(\\lambda\\), increasing \\(r_o\\) and hence gain.\n3. **Load capacitance** (not shown): The high \\(R_{out}\\) creates a dominant pole at \\(V_{out}\\), so bandwidth is limited by \\(C_L\\): \\(\\omega_{-3dB}\\approx 1/(R_{out}C_L)\\).\n\nIn short, this is a **high‑gain, inverting analog amplifier stage** whose performance is governed by the product of the input transistor’s transconductance and the parallel output resistances of the two stacked devices.",
        "format": "markdown",
        "sha256": "bb7705795bef3e59616f47baf4e7e240d14e04a6680715e98368be073573c90a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a PMOS common-source stage and gives an inverting high gain. M1 is actually an NMOS source follower with its source at Vout, so the gain is positive and at or below unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 22571,
        "total_tokens": 24676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 22571,
        "total_tokens": 24676,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a classic **single-stage CMOS common-source amplifier with an active current-sink load** (sometimes called a “common-source stage with NMOS active load”). It consists of two complementary MOSFETs stacked between the supply and ground:\n\n| Transistor | Connection | Typical Type | Role |\n|---|---|---|---|\n| **M₁** | Drain/Source between **V_DD** and **V_out**; Gate = **V_in** | **PMOS** (upper device, source tied to V_DD) | **Input / driver transistor** |\n| **M₂** | Drain/Source between **V_out** and **GND**; Gate = **V_b** | **NMOS** (lower device, source tied to GND) | **Current-sink / active load** (biased by DC voltage V_b) |\n\nBecause the gates are driven independently, **M₁** is controlled by the input signal **V_in**, while **M₂** is biased at a fixed DC potential **V_b** and therefore acts as a controlled current sink.\n\n---\n\n## 1. DC Operating-Point Analysis\n\nSince no other DC path connects to the output node, the drain currents are identical:\n\n$$I_{D1} = I_{D2} = I_D$$\n\nUsing the long-channel square-law model (ignoring channel-length modulation for the DC balance, $\\lambda \\approx 0$):\n\n**PMOS M₁** (source at V_DD, so $V_{SG1} = V_{DD} - V_{IN}$):\n$$I_D = \\frac{1}{2}k_{p}(V_{SG1} - |V_{thp}|)^2 = \\frac{1}{2}k_{p}(V_{DD} - V_{IN} - |V_{thp}|)^2$$\n\n**NMOS M₂** (source at GND, so $V_{GS2} = V_b$):\n$$I_D = \\frac{1}{2}k_{n}(V_{GS2} - V_{thn})^2 = \\frac{1}{2}k_{n}(V_b - V_{thn})^2$$\n\nThese two equations determine the **quiescent (bias) current** $I_D$ once $V_{IN}$ (the DC level of the input) and $V_b$ are chosen.\n\nThe DC output voltage $V_{OUT}$ is found by requiring both devices to stay in **saturation**:\n\n* **M₁ (PMOS) saturation:** $V_{SD1} \\ge V_{SG1} - |V_{thp}| \\;\\Rightarrow\\; V_{DD} - V_{OUT} \\ge (V_{DD} - V_{IN}) - |V_{thp}|$\n* **M₂ (NMOS) saturation:** $V_{DS2} \\ge V_{GS2} - V_{thn} \\;\\Rightarrow\\; V_{OUT} \\ge V_b - V_{thn}$\n\nIf $\\lambda \\neq 0$, $V_{OUT}$ is set precisely by matching the two $I$–$V$ curves with their output resistances ($r_o$); in that case $V_{OUT}$ sits at the intersection of the PMOS “pull-up” curve and the NMOS “pull-down” curve.\n\n> **Key point:** For maximum signal swing, the DC bias $V_{IN}$ is usually chosen so that $V_{OUT} \\approx V_{DD}/2$.\n\n---\n\n## 2. Small-Signal (AC) Analysis\n\nFor small-signal AC, **V_DD and V_b are AC grounds**. The body effect is absent because:\n- M₁’s source is at V_DD (substrate = V_DD for PMOS in n-well).\n- M₂’s source is at GND (substrate = GND for NMOS).\n\n### Small-Signal Equivalent Circuit\n- **M₁:** $v_{sg1} = v_s - v_g = 0 - v_{in} = -v_{in}$. It contributes a controlled source $g_{m1}v_{sg1}$ and output resistance $r_{o1}$.\n- **M₂:** $v_{gs2} = 0$ because $V_b$ is constant. It contributes **no** controlled source; only its output resistance $r_{o2}$ appears between $V_{OUT}$ and ground.\n\nApplying KCL at $V_{OUT}$:\n\n$$\\underbrace{g_{m1}v_{sg1} + \\frac{v_{out} - V_{DD}}{r_{o1}}}_{\\text{current from M}_1 \\to V_{OUT}} = \\underbrace{-\\frac{v_{out}}{r_{o2}}}_{\\text{current from } V_{OUT} \\to \\text{GND through M}_2}$$\n\nWith $V_{DD} \\to 0$ (AC ground):\n\n$$-g_{m1}v_{in} = v_{out}\\left(\\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}\\right)$$\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}(r_{o1} \\parallel r_{o2})}$$\n\nThe gain is **negative** (inverting): an increase in $V_{in}$ reduces $V_{SG1}$, lowering the PMOS current; M₂ then pulls $V_{OUT}$ downward.\n\nUsing $r_o = 1/(\\lambda I_D)$ and $g_m = \\sqrt{2kI_D}$, the magnitude is:\n$$|A_v| = g_{m1}(r_{o1} \\parallel r_{o2}) \\approx \\frac{g_{m1}}{\\lambda_n I_D + \\lambda_p I_D}$$\n\n### Resistances\n- **Input resistance:** $R_{in} = \\infty$ (gate is insulated).\n- **Output resistance:** $R_{out} = r_{o1} \\parallel r_{o2}$.\n\n---\n\n## 3. Operating-Region Constraints (for high gain)\n\nBoth devices must remain in saturation for the above gain formula to hold:\n\n1. **M₂ (NMOS) in saturation:** $V_{OUT} \\ge V_b - V_{thn}$\n2. **M₁ (PMOS) in saturation:** $V_{OUT} \\le V_{IN} + |V_{thp}|$\n\nIf $V_{IN}$ swings too high, M₁ enters triode (low resistance, gain drops). If $V_{OUT}$ falls too low, M₂ enters triode.\n\n---\n\n## 4. Summary of Key Results\n\n| Quantity | Expression / Value |\n|---|---|\n| **Topology** | CMOS common-source + active NMOS current-sink load |\n| **DC current** | $I_D = \\frac{1}{2}k_n(V_b - V_{thn})^2 = \\frac{1}{2}k_p(V_{DD} - V_{IN} - \\|V_{thp}\\|)^2$ |\n| **Small-signal gain** | $A_v = -g_{m1}(r_{o1} \\parallel r_{o2})$ |\n| **Output resistance** | $R_{out} = r_{o1} \\parallel r_{o2}$ |\n| **Input resistance** | $R_{in} \\to \\infty$ |\n| **Polarity** | **Inverting** |\n\nIf the problem asks for a specific numerical result, you would substitute the process parameters ($k_n, k_p, V_{thn}, V_{thp}, \\lambda_n, \\lambda_p$), device dimensions ($W/L$), and the bias values ($V_{IN}, V_b$) into the equations above to find $I_D$, $V_{OUT}$, $g_m$, and finally $A_v$.",
        "format": "markdown",
        "sha256": "9d81a95b3a8a926cf401582fc288720ab917110955b783f008999ecba6ba1393"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a common-source stage with a PMOS input device and gives an inverting gain. The actual circuit is an NMOS source follower with a positive gain at or slightly below unity.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 16136,
        "total_tokens": 18241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 16136,
        "total_tokens": 18241,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is the classic **CMOS inverter** (NOT gate / digital inverter). It consists of:\n\n* **M₂**: PMOS “pull-up” transistor, source → **V_DD**, drain → **V_out**\n* **M₁**: NMOS “pull-down” transistor, source → **GND**, drain → **V_out**\n* Both gates are driven by the same input **V_in**\n\nBecause the devices are complementary, one is always OFF in steady state, giving nearly zero static power dissipation.\n\n---\n\n## 1. DC Static Operation (Logic Levels)\n\n| V_in | M₁ (NMOS) | M₂ (PMOS) | V_out | State |\n|------|-----------|-----------|-------|-------|\n| **0 V** (LOW) | OFF (V_GS < V_thn) | **ON** (V_SG = V_DD > \\|V_thp\\|) | **V_DD** | Pull-up |\n| **V_DD** (HIGH) | **ON** (V_GS = V_DD > V_thn) | OFF (V_SG = 0 < \\|V_thp\\|) | **0 V** | Pull-down |\n\n* **V_OH = V_DD**, **V_OL = 0**\n* No direct DC path between supply and ground → **P_static ≈ 0**\n\n---\n\n## 2. Voltage Transfer Characteristic (VTC)\n\nDefine transistor strengths:\n* **βₙ = μₙCₒₓ(W/L)₁**  (NMOS)\n* **βₚ = μₚCₒₓ(W/L)₂**  (PMOS)\n\nThe VTC has **five regions** based on operating modes:\n\n| Region | V_in range | M₁ state | M₂ state | V_out behavior |\n|--------|------------|----------|----------|----------------|\n| I | < V_thn | Cutoff | Linear (V_SD ≈ 0) | **V_DD** |\n| II | V_thn → V_M | Saturation | Linear | Falls |\n| III | ≈ V_M | **Saturation** | **Saturation** | Steep (high gain) |\n| IV | V_M → V_DD−\\|V_thp\\| | Linear | Saturation | Falls |\n| V | > V_DD−\\|V_thp\\| | Linear (V_DS ≈ 0) | Cutoff | **0 V** |\n\n### Switching Threshold V_M\nAt **V_in = V_out = V_M**, both devices are in saturation with **I_Dn = I_Dp**:\n\n\\[\n\\frac{\\beta_n}{2}(V_M - V_{thn})^2 = \\frac{\\beta_p}{2}(V_{DD} - V_M - |V_{thp}|)^2\n\\]\n\nSolving:\n\n\\[\n\\boxed{V_M = \\frac{\\sqrt{\\beta_n}\\,V_{thn} + \\sqrt{\\beta_p}(V_{DD}-|V_{thp}|)}{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}}\n\\]\n\nFor a **symmetric inverter** (βₙ = βₚ and V_thn = |V_thp| = V_th):\n\n\\[\n\\boxed{V_M = \\frac{V_{DD}}{2}}\n\\]\n\n---\n\n## 3. Noise Margins\n\nThe gain **dV_out/dV_in = −1** defines the unity-gain points **V_IL** and **V_IH**:\n\n* **V_IL**: Max “low” input still interpreted as LOW\n* **V_IH**: Min “high” input still interpreted as HIGH\n\nFor the ideal long-channel case (**V_th = 0**, βₙ = βₚ):\n\n\\[\nV_{IL} = \\frac{3V_{DD}}{8}, \\qquad V_{IH} = \\frac{5V_{DD}}{8}\n\\]\n\nNoise margins:\n\\[\nNM_L = V_{IL} - 0 = \\frac{3V_{DD}}{8}, \\qquad NM_H = V_{DD} - V_{IH} = \\frac{3V_{DD}}{8}\n\\]\n\nFor real devices with **V_th > 0**, the margins shrink slightly but remain large (~V_DD/4 to V_DD/2).\n\n---\n\n## 4. Small-Signal (Analog) Analysis\n\nAt **V_M**, both transistors are saturated. The small-signal equivalent at V_out is:\n\n* **g_mn = ∂I_D1/∂V_GS** (NMOS)\n* **g_mp = ∂I_D2/∂V_SG** (PMOS)\n* Output resistances **r_on1 = 1/g_ds1**, **r_on2 = 1/g_ds2**\n\nThe voltage gain is:\n\n\\[\n\\boxed{A_v = \\frac{dV_{out}}{dV_{in}} = -\\frac{g_{mn}+g_{mp}}{g_{ds1}+g_{ds2}} \\approx -\\frac{g_{mn}+g_{mp}}{g_{dsn}+g_{dsp}}}\n\\]\n\nFor a **symmetric** inverter at V_M (g_mn = g_mp = g_m, r_on1 = r_on2 = r_o):\n\n\\[\n\\boxed{A_v \\approx -g_m r_o}\n\\]\n\nThis is a **high gain** (negative) stage—exactly why the inverter is used as a gain element in ring oscillators and in digital circuits for rapid regeneration of logic levels.\n\n---\n\n## 5. Dynamic / Transient Behavior\n\nWhen switching, **V_out** charges/discharges the load capacitance **C_L** (parasitic + fan-out):\n\n* **Rising edge** (M₂ on): t_rise ~ 2.2 R_on2 C_L\n* **Falling edge** (M₁ on): t_fall ~ 2.2 R_on1 C_L\n\nDynamic power (dominant in CMOS):\n\\[\nP_{dyn} = C_L V_{DD}^2 f_{clk}\n\\]\n\nShort-circuit current flows briefly when both devices are on during the transition, but it is usually < 10% of dynamic power if edge rates are not too slow.\n\n---\n\n## Summary\n\n| Feature | Value / Property |\n|---------|----------------|\n| **Function** | Digital inversion / analog gain stage |\n| **Static power** | ~0 (ideal) |\n| **Output high** | V_DD; **Output low** | 0 |\n| **Threshold V_M** | V_DD/2 (symmetric) |\n| **Gain at V_M** | −(g_mn+g_mp)/(g_ds n+g_ds p) ≈ −g_m r_o |\n| **Key virtue** | Full rail-to-rail swing, regenerative logic levels, zero static current |\n\nIf you need a specific derivation (e.g., deriving V_M for asymmetric β’s, computing propagation delay with C_L, or drawing the small-signal model with body effect), let me know which part to expand!",
        "format": "markdown",
        "sha256": "7b98540bbe969904ea08c390af74a86843e10d398134c81bc99f854480408c39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and their logic-level operation. The additional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 613,
        "output_tokens": 10893,
        "total_tokens": 11506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 613,
        "output_tokens": 10893,
        "total_tokens": 11506,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is the classic **CMOS inverter (NOT gate)**—a complementary push-pull structure consisting of one PMOS pull-up transistor ($M_2$) and one NMOS pull-down transistor ($M_1$).\n\n---\n\n## 1. Component Identification\n\n| Transistor | Type | Terminal Connections | Role |\n|---|---|---|---|\n| **$M_1$** | NMOS (n-channel) | Gate $\\rightarrow V_{in}$; Source $\\rightarrow$ GND; Drain $\\rightarrow V_{out}$ | **Pull-down** (discharges $V_{out}$) |\n| **$M_2$** | PMOS (p-channel) | Gate $\\rightarrow V_{in}$; Source $\\rightarrow V_{DD}$; Drain $\\rightarrow V_{out}$ | **Pull-up** (charges $V_{out}$) |\n\n*Implicit body connections:* The NMOS body is tied to ground; the PMOS body is tied to $V_{DD}$.\n\n---\n\n## 2. Static (DC) Operation\n\nBecause the gates are tied together, both devices see the same $V_{in}$, but their threshold voltages have opposite signs ($V_{thn} > 0$, $V_{thp} < 0$).\n\n### Case A: $V_{in} = 0$ (Logic “0”)\n- **$M_1$ (NMOS):** $V_{GS1} = 0 < V_{thn}$ $\\Rightarrow$ **cutoff** (open).\n- **$M_2$ (PMOS):** $V_{SG2} = V_{DD} - 0 = V_{DD}$; $V_{GS2} = 0 - V_{DD} = -V_{DD} < V_{thp}$ $\\Rightarrow$ **on** (linear/saturation).\n- **Result:** $V_{out}$ is pulled up to $V_{DD}$ (Logic “1”).\n- **Current:** Ideally $I_{DD} = 0$ because $M_1$ is off (no static path).\n\n### Case B: $V_{in} = V_{DD}$ (Logic “1”)\n- **$M_1$ (NMOS):** $V_{GS1} = V_{DD} > V_{thn}$ $\\Rightarrow$ **on**.\n- **$M_2$ (PMOS):** $V_{GS2} = V_{DD} - V_{DD} = 0 > V_{thp}$ $\\Rightarrow$ **cutoff** (open).\n- **Result:** $V_{out}$ is pulled down to GND (Logic “0”).\n- **Current:** Again ideally $I_{DD} = 0$.\n\n### Case C: $V_{in} \\approx V_{DD}/2$ (Transition)\nBoth transistors can be **simultaneously on**, creating a temporary low-resistance path ($M_2$ from $V_{DD}$ to $V_{out}$, $M_1$ from $V_{out}$ to GND). This causes a **crowbar (short-circuit) current** $I_{sc}$ that peaks during switching.\n\n---\n\n## 3. Voltage Transfer Characteristic (VTC)\n\nThe inverter has a high-gain transition region around $V_{in} = V_M$ (the switching threshold).\n\nUsing long-channel saturation currents at $V_M$:\n$$I_{Dn} = \\frac{1}{2}k_n(V_M - V_{thn})^2, \\qquad I_{Dp} = \\frac{1}{2}k_p(V_{DD} - V_M + V_{thp})^2$$\n\nSetting $I_{Dn} = I_{Dp}$ and solving for $V_M$:\n$$\\boxed{V_M = \\frac{V_{thn} + r(V_{DD} + V_{thp})}{1+r}}$$\nwhere $r = \\sqrt{k_n/k_p}$ and $k = \\mu C_{ox}(W/L)$.\n\n**Symmetry condition ($V_M = V_{DD}/2$):** If $V_{thn} = |V_{thp}| = V_{th}$, this requires:\n$$k_n = k_p \\;\\Rightarrow\\; \\frac{(W/L)_p}{(W/L)_n} = \\frac{\\mu_n}{\\mu_p} \\approx 2\\text{--}3$$\nBecause electron mobility $\\mu_n \\approx 2\\!-\\!3\\times$ hole mobility $\\mu_p$, the PMOS is usually sized wider.\n\n**Small-signal gain** in the transition region:\n$$A_v = -\\frac{g_{mn} + g_{mp}}{g_{dsn} + g_{dsp}} \\;\\;(\\text{large negative value})$$\n\n---\n\n## 4. Dynamic (Transient) Behavior\n\nThe output drives a load capacitance $C_L$ (interconnect + next-stage gates).\n\n| Transition | Dominant Device | Charging/Discharging Path | Delay |\n|---|---|---|---|\n| $V_{in}: 0 \\to V_{DD}$ | $M_1$ on, $M_2$ off | $C_L$ discharges through $M_1$ to GND | $t_{PHL}$ |\n| $V_{in}: V_{DD} \\to 0$ | $M_2$ on, $M_1$ off | $C_L$ charges through $M_2$ to $V_{DD}$ | $t_{PLH}$ |\n\nApproximate expressions (simple RC model):\n$$t_{PHL} \\approx 0.69 \\, R_{on,n} \\, C_L, \\qquad t_{PLH} \\approx 0.69 \\, R_{on,p} \\, C_L$$\n\nTo make $t_{PHL} \\approx t_{PLH}$, match on-resistances: $R_{on,p} \\approx R_{on,n}$, again requiring $(W/L)_p > (W/L)_n$.\n\n---\n\n## 5. Power Consumption\n\n$$P = P_{static} + P_{dynamic} + P_{sc}$$\n\n- **Static:** $\\approx 0$ (no DC path between rails when settled).\n- **Dynamic (switching):** $P_{dyn} = C_L V_{DD}^2 f$ (dominant).\n- **Short-circuit:** $P_{sc} \\approx I_{sc,avg} V_{DD}$ (brief pulse during transitions; minimized by fast input edges).\n\n---\n\n## 6. Key Design / Performance Metrics\n\n| Parameter | Expression / Note |\n|---|---|\n| **Noise Margin High ($NM_H$)** | $V_{OH} - V_{IH}$; ideally $\\approx V_{DD}/2$ |\n| **Noise Margin Low ($NM_L$)** | $V_{OL} - V_{IL}$; ideally $\\approx V_{DD}/2$ |\n| **Output High / Low** | $V_{OH} \\approx V_{DD}$, $V_{OL} \\approx 0$ |\n| **Logic Function** | $V_{out} = \\overline{V_{in}}$ |\n\n---\n\n## Summary\n\nThis circuit is the **fundamental CMOS inverter**. Its complementary nature guarantees:\n1. **Full rail-to-rail output swing** ($0$ or $V_{DD}$).\n2. **Zero static power dissipation** (ideally).\n3. **High noise immunity** due to steep VTC.\n4. **Fast switching** governed by transistor drive strengths and load capacitance.\n\nThe main design trade-off is transistor sizing: the PMOS is usually made **2–3× wider** than the NMOS to compensate for lower hole mobility and to center the switching threshold at $V_{DD}/2$ for symmetrical delays.",
        "format": "markdown",
        "sha256": "fdc4a2e307c52c69288ded8a9d4b7931bda534f27bc0729309aae6e7d5f1a84f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, including the NMOS pull-down and PMOS pull-up, and describes its logic-level operation correctly. The golden solution makes this sufficient for full credit; the extra analysis is not required.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 4951,
        "total_tokens": 5564,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 4951,
        "total_tokens": 5564,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is the classic **CMOS inverter** (also called a complementary MOS NOT gate / push‑pull common‑source amplifier).  \nIt consists of:\n\n| Transistor | Type | Source | Drain | Gate |\n|---|---|---|---|---|\n| **M₁** | NMOS (pull‑down) | Ground | $V_{\\rm out}$ | $V_{\\rm in}$ |\n| **M₂** | PMOS (pull‑up) | $V_{\\rm DD}$ | $V_{\\rm out}$ | $V_{\\rm in}$ |\n\nThe two gates are driven by the same input; the two drains are shorted to produce the output.\n\nBelow is a complete analysis covering DC transfer characteristics, operating regions, small‑signal (analog) gain, and digital performance metrics.\n\n---\n\n## 1. DC Transfer Characteristic ($V_{\\rm out}$ vs. $V_{\\rm in}$)\n\n### Extreme states\n* **$V_{\\rm in}=0$ (low)**  \n  $V_{GS1}=0<V_{tn}$ → $M_1$ **OFF**.  \n  $V_{SG2}=V_{DD}>|V_{tp}|$ → $M_2$ **ON** (deep triode, $V_{SD2}\\approx 0$).  \n  No current can flow to ground, so $\\boxed{V_{\\rm OH}=V_{DD}}$.\n\n* **$V_{\\rm in}=V_{DD}$ (high)**  \n  $V_{SG2}=0<|V_{tp}|$ → $M_2$ **OFF**.  \n  $V_{GS1}=V_{DD}>V_{tn}$ → $M_1$ **ON** (deep triode, $V_{DS1}\\approx 0$).  \n  $\\boxed{V_{\\rm OL}=0}$.\n\nBecause one device is always off (in steady state), the **static power dissipation is essentially zero**—a key advantage of CMOS.\n\n### Intermediate region & switching threshold $V_M$\nAs $V_{\\rm in}$ rises, both transistors can be on simultaneously. The output is set by balancing the drain currents:\n$$I_{D1}=I_{D2}$$\n\nUsing the long‑channel saturation model ($\\lambda=0$ for simplicity):\n$$\\frac{\\beta_n}{2}(V_M-V_{tn})^2=\\frac{\\beta_p}{2}\\bigl(V_{DD}-V_M-|V_{tp}|\\bigr)^2$$\n\nwhere $\\beta_n=\\mu_nC_{ox}(W/L)_1$, $\\beta_p=\\mu_pC_{ox}(W/L)_2$, $V_{tn}>0$, and $V_{tp}<0$.\n\nTaking square roots and solving gives the **switching threshold**:\n$$\\boxed{V_M=\\frac{\\sqrt{\\beta_n}\\,V_{tn}+\\sqrt{\\beta_p}\\,(V_{DD}-|V_{tp}|)}{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}}$$\n\nIf the inverter is **symmetrically sized** so that $\\beta_n=\\beta_p$ (i.e. $(W/L)_p = \\frac{\\mu_n}{\\mu_p}(W/L)_1$), then:\n$$\\boxed{V_M=\\frac{V_{DD}+V_{tn}-|V_{tp}|}{2}\\approx \\frac{V_{DD}}{2}}$$\n\n### Five operating regions\nAs $V_{\\rm in}$ increases from 0 to $V_{DD}$:\n\n| Region | $V_{\\rm in}$ range | $M_1$ (NMOS) | $M_2$ (PMOS) | $V_{\\rm out}$ |\n|---|---|---|---|---|\n| I | $<V_{tn}$ | Cut‑off | Triode (ON) | $V_{DD}$ |\n| II | $V_{tn}\\le V_{\\rm in}<V_M$ | Saturation | Triode | High, falling |\n| III | $\\approx V_M$ | **Saturation** | **Saturation** | **Steep drop (high gain)** |\n| IV | $V_M< V_{\\rm in}\\le V_{DD}-|V_{tp}|$ | Triode | Saturation | Low, falling |\n| V | $>V_{DD}-|V_{tp}|$ | Triode (ON) | Cut‑off | $0$ |\n\nRegion III is the “high‑gain” analog region.\n\n---\n\n## 2. Small‑Signal (AC) Analysis\n\nBias the inverter at $V_M$ so both devices are saturated. The small‑signal model is two common‑source devices with sources at AC ground ($M_1$→GND, $M_2$→$V_{DD}$) and gates driven by $v_{\\rm in}$.\n\n**Transconductances:**\n$$g_{m1}=\\sqrt{2\\beta_n I_D},\\qquad g_{m2}=\\sqrt{2\\beta_p I_D}$$\n\n**Output resistances (with $\\lambda\\neq 0$):**\n$$r_{o1}=\\frac{1}{\\lambda_n I_D},\\qquad r_{o2}=\\frac{1}{\\lambda_p I_D}$$\n\nBecause $v_{\\rm in}$ increasing turns $M_1$ **on harder** (pulls $v_{\\rm out}$ down) and turns $M_2$ **weaker** (pulls up less), **both effects reinforce each other**.\n\nNodal analysis at $v_{\\rm out}$ yields:\n$$\\boxed{A_v=\\frac{v_{\\rm out}}{v_{\\rm in}}=-(g_{m1}+g_{m2})\\,(r_{o1}\\parallel r_{o2})}$$\n\nFor the symmetric case ($g_{m1}=g_{m2}=g_m$, $r_{o1}=r_{o2}=r_o$):\n$$A_v=-g_m\\left(\\frac{r_o}{2}\\right)=-g_m r_o/2 \\;\\;\\Rightarrow\\;\\; \\boxed{A_v\\approx -\\frac{2}{\\lambda\\,(V_{DD}/2-V_{tn})}}$$\n\n* **Input resistance:** $\\infty$ (MOS gates are insulated).\n* **Output resistance:** $R_{\\rm out}=r_{o1}\\parallel r_{o2}$.\n\nThus, when biased at $V_M$, the CMOS inverter acts as a **high‑gain analog amplifier** (often used as a gain stage or as a comparator/inverter in analog circuits).\n\n---\n\n## 3. Digital Metrics & Performance\n\n| Parameter | Expression / Value |\n|---|---|\n| **Logic high** | $V_{\\rm OH}\\approx V_{DD}$ |\n| **Logic low** | $V_{\\rm OL}\\approx 0$ |\n| **Noise margin high** | $NM_H = V_{\\rm OH}-V_{\\rm IH}$ |\n| **Noise margin low** | $NM_L = V_{\\rm IL}-V_{\\rm OL}$ |\n| **Static power** | $\\approx 0$ (only leakage $I_{\\rm sub}$) |\n| **Dynamic power** | $P = C_L V_{DD}^2 f$ |\n| **Propagation delay** (approx.) | $t_p \\approx 0.69\\,R_{\\rm eq}C_L$ where $R_{\\rm eq}\\approx \\frac{1}{\\beta_n(V_{DD}-V_{tn})}$ for $M_1$ and similarly for $M_2$ |\n\nTo maximize noise margins and make the switching point exactly at $V_{DD}/2$, designers choose:\n$$(W/L)_2 = \\frac{\\mu_n}{\\mu_p}(W/L)_1$$\n\n---\n\n## 4. Key Takeaways\n\n1. **Topology:** A complementary (push‑pull) CMOS inverter.\n2. **DC:** Rail‑to‑rail output ($0$ or $V_{DD}$) with ideally zero static current.\n3. **Switching:** At $V_M$ both devices saturate, giving a very steep $V_{\\rm out}$ vs. $V_{\\rm in}$ curve.\n4. **Gain:** Small‑signal voltage gain is $A_v=-(g_{m1}+g_{m2})(r_{o1}\\|r_{o2})$, which can be very large ($\\sim$ tens to hundreds in modern nodes).\n5. **Use:** As a **digital NOT gate** it provides robust logic inversion with low power; as an **analog block** biased at $V_M$ it serves as a high‑gain common‑source amplifier.\n\nIf you need a specific calculation (e.g., deriving $V_M$ for given $W/L$ ratios, computing $A_v$ with a particular technology node, or drawing the five‑region $I$–$V$ curves), provide the device parameters ($V_{tn}, V_{tp}, \\mu C_{ox}, \\lambda, W/L$) and I can work out the exact numerical transfer function.",
        "format": "markdown",
        "sha256": "34054add84848e2c4fa6452c44d32604e06950169480dc4b181bcbc9d67a61ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, with the correct inverting operation. The supplemental small-signal simplification has a factor-of-two inconsistency, but it does not contradict the inverter’s operation; the golden solution’s full-credit rule applies.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 14939,
        "total_tokens": 15552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 14939,
        "total_tokens": 15552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **CMOS inverter** (digital NOT gate). It consists of two complementary MOSFETs whose gates are tied to the common input $V_\\text{in}$ and whose drains are tied to the common output $V_\\text{out}$.\n\n- **$M_1$**: PMOS “pull-up” transistor. Its source is connected to $V_\\text{DD}$ and its drain to $V_\\text{out}$.\n- **$M_2$**: NMOS “pull-down” transistor. Its source is connected to GND and its drain to $V_\\text{out}$.\n\nBelow is a comprehensive analysis: identification, DC (static) operation, the voltage transfer characteristic (VTC), regions of operation, and key design metrics.\n\n---\n\n### 1. DC / Static Analysis\n\nBecause the two transistors are **complementary**, one is on while the other is off in either steady logic state. Ideally, no DC current flows from $V_\\text{DD}$ to GND.\n\n| $V_\\text{in}$ | $M_1$ (PMOS) state | $M_2$ (NMOS) state | $V_\\text{out}$ | Current $I_\\text{DD}$ |\n|:---:|:---:|:---:|:---:|:---:|\n| **LOW** ($\\approx 0$) | **ON** (triode) | **OFF** (cut-off) | $\\approx V_\\text{DD}$ | $\\approx 0$ |\n| **HIGH** ($\\approx V_\\text{DD}$) | **OFF** (cut-off) | **ON** (triode) | $\\approx 0$ | $\\approx 0$ |\n\n**Detailed conditions** (threshold voltages: $V_\\text{tn}>0$ for $M_2$, $V_\\text{tp}<0$ for $M_1$):\n\n- **$V_\\text{in}=0$**:\n  - $V_{GS1} = 0 - V_\\text{DD} = -V_\\text{DD} < V_\\text{tp}$ $\\Rightarrow$ $M_1$ strongly ON.\n  - $V_{GS2} = 0 < V_\\text{tn}$ $\\Rightarrow$ $M_2$ OFF.\n  - $V_\\text{out}$ is pulled up to $V_\\text{DD}$.\n\n- **$V_\\text{in}=V_\\text{DD}$**:\n  - $V_{GS1} = 0 > V_\\text{tp}$ $\\Rightarrow$ $M_1$ OFF.\n  - $V_{GS2} = V_\\text{DD} > V_\\text{tn}$ $\\Rightarrow$ $M_2$ strongly ON.\n  - $V_\\text{out}$ is pulled down to GND.\n\nBecause one device is always cut off in steady state, **static power dissipation is ideally zero**. In reality, sub-threshold and leakage currents cause small $I_\\text{DD}$.\n\n---\n\n### 2. Voltage Transfer Characteristic (VTC)\n\nAs $V_\\text{in}$ sweeps from $0$ to $V_\\text{DD}$, $V_\\text{out}$ drops from $V_\\text{DD}$ to $0$. The transition is sharp and inverted.\n\nDefine transistor parameters:\n- $k_n = \\mu_n C_\\text{ox}(W/L)_2$ for $M_2$\n- $k_p = \\mu_p C_\\text{ox}(W/L)_1$ for $M_1$\n\n#### Five Operating Regions\n\n| Region | $V_\\text{in}$ range | $M_2$ (NMOS) | $M_1$ (PMOS) | Behavior of $V_\\text{out}$ |\n|:---:|:---:|:---:|:---:|:---|\n| **I** | $0 \\le V_\\text{in} < V_\\text{tn}$ | Cut-off | Triode (ON) | $V_\\text{out} = V_\\text{DD}$ |\n| **II** | $V_\\text{tn} \\le V_\\text{in} < V_M$ | Saturation | Triode | $V_\\text{out}$ falls sharply |\n| **III** | $V_\\text{in} \\approx V_M$ | Saturation | Saturation | **High gain** region |\n| **IV** | $V_M < V_\\text{in} \\le V_\\text{DD}+V_\\text{tp}$ | Triode | Saturation | $V_\\text{out}$ approaches $0$ |\n| **V** | $V_\\text{DD}+V_\\text{tp} < V_\\text{in} \\le V_\\text{DD}$ | Triode | Cut-off | $V_\\text{out} = 0$ |\n\nWhere $V_M$ is the **switching threshold** (the point where $V_\\text{in}=V_\\text{out}$).\n\n---\n\n### 3. Switching Threshold $V_M$\n\nAt $V_M$, both transistors are in saturation and the current through $M_1$ equals the current through $M_2$:\n\n$$\n\\frac{k_n}{2}(V_M - V_\\text{tn})^2 = \\frac{k_p}{2}\\bigl(V_\\text{DD} - V_M + V_\\text{tp}\\bigr)^2\n$$\n\nSolving gives:\n\n$$\n\\boxed{V_M = \\frac{V_\\text{DD} + V_\\text{tp} + \\sqrt{k_n/k_p}\\,V_\\text{tn}}{1 + \\sqrt{k_n/k_p}}}\n$$\n\n(Using $V_\\text{tp}<0$; if $V_\\text{tp}=-|V_\\text{tp}|$, replace accordingly.)\n\nFor a **symmetric inverter** ($V_M \\approx V_\\text{DD}/2$) with $V_\\text{tn} \\approx |V_\\text{tp}| \\equiv V_\\text{th}$, we require:\n$$\n\\sqrt{k_n/k_p} \\approx 1 \\;\\Rightarrow\\; \\frac{(W/L)_1}{(W/L)_2} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2\\text{–}3\n$$\nBecause electron mobility $\\mu_n$ is roughly 2–3× hole mobility $\\mu_p$, the PMOS is typically made **wider** than the NMOS.\n\n---\n\n### 4. Voltage Gain\n\nThe small-signal gain is maximum in Region III (both saturated):\n\n$$\nA_v = \\frac{dV_\\text{out}}{dV_\\text{in}} \\approx -g_{m1,2}(r_{o1} \\parallel r_{o2})\n$$\n\nwhere $g_m$ is the transconductance and $r_o$ is the output resistance. The magnitude can be large ($|A_v| \\gg 1$), giving the inverter its regenerative (high-gain) switching behavior and enabling noise-margin definition.\n\n---\n\n### 5. Dynamic Operation & Power\n\nWhen $V_\\text{in}$ switches, $V_\\text{out}$ must charge/discharge the load capacitance $C_L$ (interconnect + fan-out gates).\n\n- **Rising $V_\\text{out}$ (LOW $\\to$ HIGH)**: $M_1$ turns on and supplies current to $C_L$.\n- **Falling $V_\\text{out}$ (HIGH $\\to$ LOW)**: $M_2$ turns on and sinks current from $C_L$.\n\nBecause of finite rise/fall times, there is a brief interval during switching where **both $M_1$ and $M_2$ are ON**, causing a **short-circuit (shoot-through) current** $I_\\text{sc}$ from $V_\\text{DD}$ to GND.\n\n**Power components**:\n1. **Dynamic (switching) power** (dominant):\n   $$\n   P_\\text{dyn} = C_L V_\\text{DD}^2 f\n   $$\n2. **Short-circuit power**:\n   $$\n   P_\\text{sc} \\approx \\frac{\\beta}{12}(V_\\text{DD} - 2V_\\text{th})^3 \\tau_\\text{rise/fall} f\n   $$\n3. **Leakage (static) power**:\n   $$\n   P_\\text{leak} \\approx I_\\text{leak} V_\\text{DD}\n   $$\n\n---\n\n### 6. Noise Margins\n\nThe inverter is defined by its noise margins, which depend on $V_\\text{OL} \\approx 0$, $V_\\text{OH} \\approx V_\\text{DD}$, and the input thresholds $V_\\text{IL}$, $V_\\text{IH}$ (where $|A_v|=1$):\n\n- **Low noise margin**: $\\text{NM}_L = V_\\text{IL} - V_\\text{OL}$\n- **High noise margin**: $\\text{NM}_H = V_\\text{OH} - V_\\text{IH}$\n\nFor a well-designed symmetric CMOS inverter with $V_\\text{DD} \\gg V_\\text{th}$:\n$$\n\\text{NM}_L \\approx \\text{NM}_H \\approx \\frac{V_\\text{DD}}{2}\n$$\n\n---\n\n### 7. Summary of Key Properties\n\n| Feature | Value / Behavior |\n|:---|:---|\n| **Function** | Logical inversion ($V_\\text{out} = \\overline{V_\\text{in}}$) |\n| **Static current** | Ideally 0; leakage only |\n| **Output levels** | Strong 0 (GND) and strong 1 ($V_\\text{DD}$) |\n| **Gain** | High ($> 1$, typically 20–100) near $V_M$ |\n| **Switching threshold** | $V_M \\approx V_\\text{DD}/2$ (by design) |\n| **Power** | Dynamic dominates; zero static (ideal) |\n| **Speed** | Determined by $C_L$ and transistor on-resistance $R_\\text{on}$ |\n\nIn summary, this is the fundamental **CMOS inverter**: it provides full rail-to-rail output swing, negligible static power, high noise immunity, and a sharp transfer characteristic—making it the basic building block of digital VLSI circuits (logic gates, SRAM, microprocessors).",
        "format": "markdown",
        "sha256": "6c82e37559e3dd7a74c489bb04361293f0e196a0c7d6cebe6f741483594a8258"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter. The golden solution requires identifying both devices as NMOS; this topology error triggers the zero-score rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 8836,
        "total_tokens": 9449,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 8836,
        "total_tokens": 9449,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5369,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is the classic **CMOS inverter** (also called a **complementary common‑source stage** or **push‑pull inverter**).  \nIt consists of two MOS transistors whose gates are driven by a common input $V_{in}$ and whose drains are tied to a common output node $V_{out}$:\n\n* **$M_1$** – PMOS transistor. Source $\\rightarrow V_{DD}$, Drain $\\rightarrow V_{out}$, Gate $\\rightarrow V_{in}$.\n* **$M_2$** – NMOS transistor. Drain $\\rightarrow V_{out}$, Source $\\rightarrow \\text{GND}$, Gate $\\rightarrow V_{in}$.\n\nThe body terminals are implicitly tied to their respective sources ($V_{DD}$ for $M_1$, GND for $M_2$), so **there is no body effect** ($V_{SB}=0$) and the threshold voltages $V_{thp}<0$ and $V_{thn}>0$ are constant.\n\nBelow is a systematic analysis: DC/static behavior, the voltage‑transfer characteristic (VTC), small‑signal (analog) properties, and dynamic/switching behavior.\n\n---\n\n## 1. DC / Static Operation (Digital Mode)\n\nBecause the two devices are complementary, in any steady logic state one transistor is **OFF** (open) and the other is **ON** (low resistance). Hence there is ideally **no DC path** from $V_{DD}$ to ground.\n\n| $V_{in}$ | State of $M_2$ (NMOS) | State of $M_1$ (PMOS) | $V_{out}$ | Static current $I_{DD}$ |\n|----------|----------------------|----------------------|-----------|------------------------|\n| $0$ (LOW) | OFF ($V_{GS}<V_{thn}$) | ON ($V_{SG}=V_{DD}>|V_{thp}|$) | $V_{DD}$ (HIGH) | $\\approx 0$ |\n| $V_{DD}$ (HIGH) | ON ($V_{GS}=V_{DD}>V_{thn}$) | OFF ($V_{SG}=0<|V_{thp}|$) | $0$ (LOW) | $\\approx 0$ |\n\n* **$V_{OH}=V_{DD}$**, **$V_{OL}=0$**: Full rail‑to‑rail swing.\n* The circuit acts as a **logic inverter**: $V_{out} = \\overline{V_{in}}$.\n\n---\n\n## 2. Voltage Transfer Characteristic (VTC)\n\nFor intermediate $V_{in}$, both devices can be on simultaneously, creating a **short‑circuit current** $I_{sc}$ from $V_{DD}$ to GND. The VTC is divided into five regions based on the operating regions (cutoff / linear / saturation) of $M_1$ and $M_2$.\n\nDefine:\n* $\\beta_n = \\mu_n C_{ox}(W/L)_n$, $\\beta_p = \\mu_p C_{ox}(W/L)_p$\n* $V_{thn}$, $|V_{thp}|$\n\n### Region I: $0 \\le V_{in} < V_{thn}$\n* $M_2$ **cutoff**, $M_1$ **linear** (or triode).\n* $V_{out} = V_{DD}$.\n\n### Region II: $V_{thn} \\le V_{in} < V_M$\n* $M_2$ **saturation** ($V_{DS} \\ge V_{GS}-V_{thn}$ because $V_{out}$ is still high).\n* $M_1$ **linear** ($V_{SD} \\le V_{SG}-|V_{thp}|$).\n* Equating drain currents ($I_{D2}=-I_{D1}$) gives $V_{out}(V_{in})$ as a falling curve.\n\n### Region III: The “switching” point ($V_{in}=V_M$)\nAt the point of **maximum small‑signal gain**, both transistors are in **saturation**:\n$$\nI_{D2} = \\frac{\\beta_n}{2}(V_M-V_{thn})^2, \\qquad\nI_{D1} = \\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{thp}|)^2.\n$$\nSetting them equal yields the **switching threshold**:\n$$\n\\boxed{\nV_M = \\frac{\\sqrt{\\beta_n}\\,V_{thn} + \\sqrt{\\beta_p}\\,(V_{DD}-|V_{thp}|)}{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}\n$$\n\nFor a **symmetric design** ($\\beta_n=\\beta_p=\\beta$ and $V_{thn}=|V_{thp}|=V_{th}$):\n$$\n\\boxed{V_M = \\frac{V_{DD}}{2}}.\n$$\n\nAt $V_M$, $V_{out}=V_M$.\n\n### Region IV: $V_M < V_{in} \\le V_{DD}-|V_{thp}|$\n* $M_2$ **linear**, $M_1$ **saturation**.\n* $V_{out}$ continues to fall sharply toward 0.\n\n### Region V: $V_{DD}-|V_{thp}| < V_{in} \\le V_{DD}$\n* $M_1$ **cutoff**, $M_2$ **linear**.\n* $V_{out} = 0$.\n\n### Sketch of VTC\n```\nVout\nVDD |           _______\n    |          /       \\\n    |         /         \\\nVM  |--------/           \\--------\n    |       /             \\\n  0 |______/               \\______\n    +----------------------------- Vin\n      Vthn   VM        VDD-|Vthp|\n```\nThe slope $dV_{out}/dV_{in}$ is $\\approx 0$ at the extremes and reaches a large **negative** value near $V_M$.\n\n---\n\n## 3. Small‑Signal / Analog Analysis (Biased at $V_M$)\n\nIf $V_{in}$ is biased at $V_M$ (e.g., via feedback or as an analog amplifier), both devices are saturated.\n\n### Transconductances\n$$\ng_{mn} = \\beta_n(V_M-V_{thn}), \\qquad g_{mp} = \\beta_p(V_{DD}-V_M-|V_{thp}|).\n$$\n\n### Output resistances\n$$\nr_{on} = \\frac{1}{\\lambda_n I_D}, \\qquad r_{op} = \\frac{1}{\\lambda_p I_D}.\n$$\n\n### Voltage gain\nBecause $V_{in}$ drives both gates (the PMOS sees $v_{sg}=-v_{in}$), the small‑signal currents add:\n$$\n\\boxed{\nA_v = \\frac{v_{out}}{v_{in}} = -(g_{mn}+g_{mp})(r_{on} \\parallel r_{op})\n}\n$$\n\nFor the **symmetric case** ($g_{mn}=g_{mp}=g_m$, $r_{on}=r_{op}=r_o$):\n$$\nA_v = -2g_m \\left(\\frac{r_o}{2}\\right) = -g_m r_o.\n$$\nTypical values: $g_m r_o \\sim 20$–$100$ (depends on channel length and bias).\n\n* **Input impedance:** $\\approx \\infty$ (MOS gates are insulated).\n* **Output impedance:** $R_{out} = r_{on} \\parallel r_{op}$.\n\n---\n\n## 4. Dynamic / Switching Behavior\n\nReal circuits drive a **load capacitance** $C_L$ (drain diffusion, interconnect, fan‑out gates).\n\n### Charging ($V_{out}: 0 \\to V_{DD}$)\n* $M_2$ turns OFF; $M_1$ turns ON (linear region).\n* $C_L$ is charged through $M_1$.\n* **Rise time / delay:** $t_{pLH} \\approx 0.69\\,R_{on,p}\\,C_L$, where $R_{on,p} \\approx [\\beta_p(V_{DD}-|V_{thp}|)]^{-1}$.\n\n### Discharging ($V_{out}: V_{DD} \\to 0$)\n* $M_1$ turns OFF; $M_2$ turns ON.\n* $C_L$ discharges through $M_2$ to GND.\n* **Fall time / delay:** $t_{pHL} \\approx 0.69\\,R_{on,n}\\,C_L$.\n\nIf $\\beta_n=\\beta_p$ (and thus $R_{on,n}=R_{on,p}$), $t_{pHL}=t_{pLH}$.\n\n### Short‑circuit current\nWhile $V_{in}$ is between $V_{thn}$ and $V_{DD}-|V_{thp}|$, **both** transistors conduct. A pulse of current $I_{sc}$ flows directly from $V_{DD}$ to GND. The energy lost per switching event is:\n$$\nE_{sc} = \\int I_{sc}(t)\\,V_{DD}\\,dt.\n$$\n\n---\n\n## 5. Power Consumption\n\n| Component | Expression / Approximation |\n|-----------|---------------------------|\n| **Static power** | $P_{static} \\approx 0$ (ideally; leakage is $\\sim$ nW–µW in modern nodes) |\n| **Dynamic (switching) power** | $P_{dyn} = C_L V_{DD}^2 f_{sw}$ (where $f_{sw}$ is the switching frequency and $\\alpha$ is activity factor) |\n| **Short‑circuit power** | $P_{sc} = f_{sw} \\int I_{sc}(t)V_{DD}\\,dt$ (typically 10–30% of $P_{dyn}$) |\n| **Total** | $P \\approx \\alpha C_L V_{DD}^2 f_{sw} + P_{sc} + P_{leak}$ |\n\nBecause $P_{static} \\approx 0$, CMOS logic is extremely efficient compared to NMOS/PMOS resistive‑load logic.\n\n---\n\n## 6. Noise Margins\n\nThe noise margins are defined by the “unity‑gain” points on the VTC ($dV_{out}/dV_{in}=-1$):\n\n$$\nNM_L = V_{IL} - V_{OL}, \\qquad NM_H = V_{OH} - V_{IH}.\n$$\n\nFor the **symmetric** inverter with $V_{th}=0$:\n* $V_{IL} = \\frac{3}{8}V_{DD}$\n* $V_{IH} = \\frac{5}{8}V_{DD}$\n* $NM_L = NM_H = \\frac{3}{8}V_{DD}$\n\nWith non‑zero thresholds, the margins shrink slightly, but they remain large—one of the key strengths of CMOS.\n\n---\n\n## 7. Summary of Key Properties\n\n| Property | Value / Behavior |\n|----------|------------------|\n| **Function** | Digital inverter; can be biased as analog inverting amplifier |\n| **Static power** | $\\approx 0$ (no DC path) |\n| **Output swing** | Full rail: $0 \\to V_{DD}$ |\n| **Gain at $V_M$** | $A_v \\approx -g_m r_o$ (high, $\\sim$20–100) |\n| **Input impedance** | Very high ($\\Omega$–M$\\Omega$ range, basically capacitive) |\n| **Noise margin** | Large ($\\sim 3V_{DD}/8$ for symmetric case) |\n| **Switching speed** | Set by $C_L$ and on‑resistances $R_{on,n}, R_{on,p}$ |\n| **Short‑circuit current** | Present only during transitions |\n\n---\n\n### Bottom Line\nThe two‑transistor figure is the **fundamental CMOS inverter**. It provides **complete logic inversion with full voltage swing and zero static power dissipation**. Its analysis involves:\n1. Determining which transistor is on/off in each logic state,\n2. Deriving the VTC by equating $I_{D2}=-I_{D1}$ through the five operating regions,\n3. Computing the switching threshold $V_M$ (typically $V_{DD}/2$ for matched devices),\n4. Evaluating small‑signal gain if biased as an amplifier,\n5. Characterizing speed/power via $C_L$, $R_{on}$, and the short‑circuit current.\n\nIf you have specific parameters ($V_{DD}$, $W/L$ ratios, $V_{th}$, $C_L$, $\\lambda$), I can compute explicit numerical values for $V_M$, $A_v$, $t_p$, and power.",
        "format": "markdown",
        "sha256": "08cc29ad04822fe7ee105897d7450bfe77a8bff7257e22bbb7e449d3afa38c12"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS and analyzes the circuit as a complementary CMOS inverter. The golden solution requires identifying both devices as NMOS; this topology error earns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 11630,
        "total_tokens": 12243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 11630,
        "total_tokens": 12243,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure is the classic **CMOS inverter** (NOT gate). It is the fundamental building block of digital integrated circuits.\n\n### 1. Circuit Identification\n| Transistor | Type | Terminal Connections |\n| :--- | :--- | :--- |\n| **M₁** | PMOS (pull-up) | Source → **VDD**, Drain → **Vout**, Gate → **Vᵢₙ** |\n| **M₂** | NMOS (pull-down) | Source → **GND**, Drain → **Vout**, Gate → **Vᵢₙ** |\n\nThe output node **Vₒᵤₜ** is the common drain connection of the two complementary transistors.\n\n---\n\n### 2. DC Static Operation (Steady-State)\n\nBecause the gates are tied to the same input, the two transistors are **never ON simultaneously in steady state** (ideally). Thus, there is **no direct current path** from VDD to GND, giving the circuit its hallmark property: **near-zero static power dissipation**.\n\n| Input **Vᵢₙ** | M₁ (PMOS) | M₂ (NMOS) | Output **Vₒᵤₜ** | State |\n| :--- | :--- | :--- | :--- | :--- |\n| **0 V** (Logic 0) | **ON** (Vgs = –VDD < Vthp) | **OFF** (Vgs = 0 < Vthn) | **VDD** (Logic 1) | Pull-up |\n| **VDD** (Logic 1) | **OFF** (Vgs = 0 > Vthp) | **ON** (Vgs = VDD > Vthn) | **0 V** (Logic 0) | Pull-down |\n| **Intermediate** | Both may conduct | Both may conduct | Determined by β-ratio | Transition |\n\n* **Vthn**: NMOS threshold voltage (~0.3–0.5 V)\n* **Vthp**: PMOS threshold voltage (negative, magnitude ~0.3–0.5 V)\n\n---\n\n### 3. Voltage Transfer Characteristic (VTC)\n\nThe VTC has three regions:\n\n1. **Low-input region** (Vᵢₙ ≈ 0): M₁ is a low-resistance switch to VDD; M₂ is open. Vₒᵤₜ = VDD.\n2. **High-input region** (Vᵢₙ ≈ VDD): M₂ is a low-resistance switch to GND; M₁ is open. Vₒᵤₜ = 0.\n3. **Transition region**: Both transistors are saturated (or one in triode) and fight each other. The gain is very high (negative).\n\n#### Switching Threshold **V_M**\nAt the point where **Vᵢₙ = Vₒᵤₜ = V_M**, both devices are in saturation (assuming the design is balanced). Setting the drain currents equal:\n\n$$\n\\frac{1}{2}k_n(V_M - V_{thn})^2 = \\frac{1}{2}k_p(V_{DD} - V_M - |V_{thp}|)^2\n$$\n\nwhere $k_n = \\mu_n C_{ox}(W/L)_n$ and $k_p = \\mu_p C_{ox}(W/L)_p$.\n\nSolving for $V_M$:\n\n$$\nV_M = \\frac{V_{thn} + \\sqrt{k_p/k_n}(V_{DD} - |V_{thp}|)}{1 + \\sqrt{k_p/k_n}}\n$$\n\nFor a **symmetric inverter** ($k_n = k_p$ and $V_{thn} = |V_{thp}|$):\n\n$$\nV_M = \\frac{V_{DD}}{2}\n$$\n\n---\n\n### 4. Noise Margins\n\nThe ideal inverter has full voltage swing ($V_{OH} = V_{DD}$, $V_{OL} = 0$). The noise margins are:\n\n* **NMₕ** (High) = $V_{OH} - V_{IH}$\n* **NMₗ** (Low) = $V_{IL} - V_{OL}$\n\n$V_{IH}$ and $V_{IL}$ are defined as the points on the VTC where $\\frac{dV_{out}}{dV_{in}} = -1$. For a well-designed symmetric inverter, both margins are close to **VDD/2**, providing excellent noise immunity.\n\n---\n\n### 5. Dynamic (Switching) Analysis\n\nIn practice, **Vₒᵤₜ** drives a load capacitance **Cₗ** (gate capacitances of fan-out stages, interconnect, and drain junction capacitances).\n\n* **Low → High transition (charging Cₗ):**\n  M₁ turns on; current flows from VDD to Cₗ. M₁ operates in saturation initially, then triode.\n* **High → Low transition (discharging Cₗ):**\n  M₂ turns on; Cₗ discharges to GND.\n\nBecause of the complementary nature, the output is actively driven both high and low, giving **strong, fast transitions**.\n\n#### Short-Circuit Current ($I_{SC}$)\nDuring switching, if the input rise/fall time is not instantaneous, there is a brief window where **both M₁ and M₂ are ON**. A current spike flows directly from VDD to GND. This contributes to **dynamic power**:\n\n$$\nP_{dyn} = C_L V_{DD}^2 f + I_{SC} V_{DD} + P_{leakage}\n$$\n\nTo minimize $I_{SC}$, inputs should have sharp edges (small rise/fall times).\n\n---\n\n### 6. Design / Transistor Sizing\n\nBecause hole mobility ($\\mu_p$) is lower than electron mobility ($\\mu_n$) by a factor of ~2–3, PMOS is inherently weaker.\n\nTo achieve **symmetric propagation delays** ($t_{PHL} \\approx t_{PLH}$) and a centered $V_M$:\n\n$$\n\\frac{(W/L)_p}{(W/L)_n} \\approx \\frac{\\mu_n}{\\mu_p} \\approx 2 \\text{ to } 3\n$$\n\nSo **M₁ is typically 2–3× wider** than M₂.\n\n---\n\n### 7. Key Characteristics Summary\n\n| Feature | Property |\n| :--- | :--- |\n| **Logic Function** | Inverter / NOT gate |\n| **Static Power** | $\\approx$ 0 (only leakage) |\n| **Voltage Swing** | Full rail-to-rail (0 to VDD) |\n| **Noise Immunity** | High |\n| **Gain** | Very high in transition region |\n| **Speed** | Determined by $C_L$ and transistor drive strengths |\n| **Scalability** | Excellent (works well with VDD scaling) |\n\n### Conclusion\nThis is the quintessential **CMOS inverter**. Its complementary structure ensures that in any stable logic state, one transistor is fully on while the other is fully off, yielding ideal static behavior (no DC current, full voltage swing) and robust dynamic performance as the backbone of modern digital logic gates (NAND, NOR, flip-flops, etc.).",
        "format": "markdown",
        "sha256": "d737a2572db7f1ae5a806ab4f8db1d6991afb273887f565572428571e9e433ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M₁ as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter. The golden solution requires both devices to be identified as NMOS; this topology error triggers a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 6688,
        "total_tokens": 7301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 613,
        "output_tokens": 6688,
        "total_tokens": 7301,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure shows a **single-stage common-source (CS) amplifier with a diode-connected PMOS load** (often called a **diode-loaded CS stage**).\n\n---\n\n## 1. Component Identification\n\n| Transistor | Type | Terminal Connections |\n|------------|------|----------------------|\n| **M₁** | **NMOS** | Gate = $V_{\\text{in}}$, Source = GND, Drain = $V_{\\text{out}}$ |\n| **M₂** | **PMOS** | Source = $V_{DD}$, Drain = $V_{\\text{out}}$, Gate = $V_{\\text{out}}$ (diode-connected) |\n\nBecause $M_2$’s gate is shorted to its drain ($V_{\\text{out}}$), it acts as a **nonlinear two-terminal resistor** (an active load) between $V_{DD}$ and $V_{\\text{out}}$. Both transistors have their bodies tied to their sources ($M_1$ to GND, $M_2$ to $V_{DD}$), so **there is no body effect** ($V_{SB}=0$).\n\nThe current through $M_1$ equals that through $M_2$ (no DC load on $V_{\\text{out}}$):\n$$I_{D1} = I_{D2} = I_D$$\n\n---\n\n## 2. DC Transfer Characteristic ($V_{\\text{out}}$ vs. $V_{\\text{in}}$)\n\nUsing the square-law model (ignoring channel-length modulation $\\lambda=0$ for simplicity):\n\n**M₁ (NMOS):**\n$$I_D = \\frac{1}{2}k_n(V_{\\text{in}}-V_{\\text{thn}})^2, \\quad k_n=\\mu_n C_{ox}(W/L)_1$$\nValid when $V_{\\text{out}} \\ge V_{\\text{in}}-V_{\\text{thn}}$ (saturation).\n\n**M₂ (PMOS, diode-connected):**\n$$I_D = \\frac{1}{2}k_p(V_{DD}-V_{\\text{out}}-|V_{\\text{thp}}|)^2, \\quad k_p=\\mu_p C_{ox}(W/L)_2$$\nA diode-connected MOSFET is **always in saturation** when it is on.\n\n### Operating Regions\n\n| Region | Condition | Behavior |\n|--------|-----------|----------|\n| **Cutoff** | $V_{\\text{in}} < V_{\\text{thn}}$ | $M_1$ off $\\Rightarrow I_D=0$. $M_2$ also off ($V_{GS2}=0 > V_{\\text{thp}}$). $V_{\\text{out}} = V_{DD}$. |\n| **Saturation–Saturation** | $V_{\\text{thn}} \\le V_{\\text{in}} \\le V_{\\text{thn}}+x$ | Both in saturation. Solving $I_{D1}=I_{D2}$ gives a **linear** relationship: $$V_{\\text{out}} = V_{DD}-|V_{\\text{thp}}| - \\sqrt{\\frac{k_n}{k_p}}(V_{\\text{in}}-V_{\\text{thn}})$$ The upper limit is when $M_1$ enters triode: $x = \\frac{V_{DD}-|V_{\\text{thp}}|}{1+\\sqrt{k_n/k_p}}$. |\n| **Triode–Saturation** | $V_{\\text{in}} > V_{\\text{thn}}+x$ | $M_1$ enters triode; $M_2$ remains saturated. $V_{\\text{out}}$ drops nonlinearly toward a small positive value. |\n| **Deep Triode** | $V_{\\text{in}} \\to V_{DD}$ | $M_1$ acts like a small resistor. $V_{\\text{out}} \\approx \\frac{I_{D,\\text{sat}}}{k_n(V_{DD}-V_{\\text{thn}})} > 0$. |\n\n**Key DC insight:** In the middle region (both saturated), the DC characteristic is a **straight line** with constant slope:\n$$\\frac{dV_{\\text{out}}}{dV_{\\text{in}}} = -\\sqrt{\\frac{k_n}{k_p}}$$\n\n---\n\n## 3. Small-Signal Analysis\n\nSet $v_{\\text{in}}$ as small signal; $V_{DD}$ is AC ground.\n\n### Small-Signal Model\n- **$M_1$:** Transconductance $g_{m1}$, output resistance $r_{o1}$.\n- **$M_2$:** Diode-connected $\\Rightarrow$ its small-signal resistance between $V_{\\text{out}}$ and AC ground is:\n  $$R_{M2} = r_{o2} \\parallel \\frac{1}{g_{m2}}$$\n  (For a diode-connected device, $R = 1/(g_m+g_{ds}) \\approx 1/g_m$).\n\nThe equivalent resistance at the output node is:\n$$R_{\\text{eq}} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}$$\n\nThe current source $g_{m1}v_{\\text{in}}$ draws current from $V_{\\text{out}}$ to ground.\n\n### Voltage Gain\n$$A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1}R_{\\text{eq}} = -g_{m1}\\left(r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}\\right)$$\n\nBecause $r_{o1},r_{o2} \\gg 1/g_{m2}$:\n$$\\boxed{A_v \\approx -\\frac{g_{m1}}{g_{m2}}}$$\n\nUsing $g_{m} = \\sqrt{2k I_D}$ (saturation):\n$$\\frac{g_{m1}}{g_{m2}} = \\sqrt{\\frac{k_n}{k_p}} \\quad \\Rightarrow \\quad \\boxed{A_v \\approx -\\sqrt{\\frac{k_n}{k_p}}}$$\n\nThis confirms the DC slope: **the gain is constant** in the saturation–saturation region.\n\nIf channel-length modulation is included:\n$$A_v = -\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}$$\n\n### Impedances\n- **Input resistance:** $R_{\\text{in}} = \\infty$ (gate of $M_1$).\n- **Output resistance:** \n  $$R_{\\text{out}} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n  The output resistance is **low** (set by the diode-connected load).\n\n---\n\n## 4. Design / Physical Interpretation\n\n| Parameter | Typical Value / Comment |\n|-----------|------------------------|\n| **Gain magnitude** | $|A_v| = \\sqrt{k_n/k_p} \\approx 1.5\\text{–}5$ (usually small). For $k_n=k_p$, $|A_v|=1$. |\n| **Output resistance** | $\\approx 1/g_{m2}$ (low, good for driving capacitive loads but poor for high gain). |\n| **Linearity** | The DC curve is linear over a wide range; this stage can serve as a **linear level shifter** or **low-gain amplifier**. |\n| **Comparison** | To get **high gain** ($>20$), replace $M_2$ with a **current-source load** (gate biased at constant $V_b$), yielding $R_{\\text{out}} \\approx r_{o1} \\parallel r_{o2}$ and $A_v \\approx -g_{m1}(r_{o1} \\parallel r_{o2})$. |\n\n---\n\n## 5. Summary\n\n- **Topology:** Common-source amplifier ($M_1$) with diode-connected PMOS load ($M_2$).\n- **DC:** $V_{\\text{out}}$ decreases linearly with $V_{\\text{in}}$ until $M_1$ enters triode; $V_{\\text{out}}$ never reaches 0.\n- **AC:** Voltage gain is approximately $-g_{m1}/g_{m2} = -\\sqrt{k_n/k_p}$, constant in the active region.\n- **Characteristics:** Moderate/low gain, low output resistance ($\\approx 1/g_{m2}$), infinite input resistance, no body effect.\n\nThis circuit is widely used in **CMOS analog design** as a basic gain stage, in **current mirrors** (the diode-connected $M_2$ serves as reference), and in **level-shifting circuits** where a predictable, moderate gain is desired.",
        "format": "markdown",
        "sha256": "ea914ef1e7076e2ce157a393e110fcf6daed8bbfa7aba762f18ba1931687b8c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain both with consistent output-resistance terms and in the usual approximation, −gm1/gm2. The extra DC discussion is not needed for full credit.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 16543,
        "total_tokens": 18053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 16543,
        "total_tokens": 18053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a classic **CMOS common-source amplifier with a diode-connected PMOS load** (also called a **diode-loaded common-source stage**).\n\n- **$M_1$**: NMOS transistor ($V_{in}$ to gate, source grounded, drain = $V_{out}$).\n- **$M_2$**: PMOS transistor connected between $V_{DD}$ and $V_{out}$. Its **gate is shorted to its drain node** ($V_{out}$), so it is **diode-connected** (acts as a two-terminal nonlinear resistor/current source).\n\nBecause $V_{DD}$ is an AC ground, $M_2$’s source is at AC ground, and its gate = drain = $V_{out}$. Thus $M_2$ is always in saturation when it is on ($V_{SG} > |V_{thp}|$).\n\n---\n\n## 1. DC Analysis & Voltage Transfer Characteristic (VTC)\n\nUse long-channel square-law models (no body effect: $M_1$ bulk = GND, $M_2$ bulk = $V_{DD}$).\n\nDefine:\n- $k_n = \\mu_n C_{ox}(W/L)_1$, $\\; V_{thn}$\n- $k_p = \\mu_p C_{ox}(W/L)_2$, $\\; V_{thp} < 0$\n\nKCL at $V_{out}$: $\\; I_{D1} = I_{D2}$.\n\n### Region A: $V_{in} \\le V_{thn}$ ($M_1$ off)\n$M_1$ draws essentially zero current, so $M_2$ also carries $I_D \\approx 0$.\nBecause $M_2$ is diode-connected, it turns off when $V_{SG} = |V_{thp}|$:\n$$V_{out} = V_{OH} \\approx V_{DD} - |V_{thp}|$$\n*(This is **not** $V_{DD}$; the diode-connected load cannot fully pull up to the rail.)*\n\n### Region B: Both transistors saturated\n$V_{in} > V_{thn}$ and $V_{out} \\ge V_{in}-V_{thn}$.\n\n$$I_{D1} = \\frac{k_n}{2}(V_{in}-V_{thn})^2, \\qquad V_{GS1}=V_{in}$$\n$$I_{D2} = \\frac{k_p}{2}(V_{DD}-V_{out}-|V_{thp}|)^2, \\qquad V_{SG2}=V_{DD}-V_{out}$$\n\nEquating them and solving for $V_{out}$ gives a **straight line**:\n$$\\boxed{V_{out} = \\left(V_{DD}-|V_{thp}|\\right) - \\sqrt{\\frac{k_n}{k_p}}\\,(V_{in}-V_{thn})}$$\n\nThe slope is constant:\n$$\\frac{dV_{out}}{dV_{in}} = -\\sqrt{\\frac{k_n}{k_p}} = A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nThis linear region ends when $M_1$ enters triode:\n$$V_{out} = V_{in} - V_{thn} \\;\\Rightarrow\\; V_{in} = V_{thn} + \\frac{V_{DD}-|V_{thp}|}{1+\\sqrt{k_n/k_p}}$$\n\n### Region C: $M_1$ in triode, $M_2$ saturated\n$$I_{D1} = k_n\\left[(V_{in}-V_{thn})V_{out} - \\frac{V_{out}^2}{2}\\right]$$\n$$I_{D2} = \\frac{k_p}{2}(V_{DD}-V_{out}-|V_{thp}|)^2$$\n\nSetting $I_{D1}=I_{D2}$ yields a quadratic for $V_{out}(V_{in})$. At $V_{in}=V_{DD}$:\n$$V_{out} = V_{OL} \\;\\;(\\text{small, solved from the quadratic})$$\nTypically $V_{OL} \\approx \\frac{k_p}{k_n}\\frac{(V_{DD}-|V_{thp}|)^2}{2(V_{DD}-V_{thn})}$ if $k_n \\gg k_p$.\n\n### Summary of VTC\n| Region | $M_1$ | $M_2$ | $V_{out}$ behavior |\n|--------|-------|-------|-------------------|\n| Low $V_{in}$ | Off | Off (edge) | Flat at $V_{DD}-|V_{thp}|$ |\n| Mid $V_{in}$ | Sat | Sat | **Linear fall** with slope $-\\sqrt{k_n/k_p}$ |\n| High $V_{in}$ | Triode | Sat | Curved to $V_{OL}$ |\n\n---\n\n## 2. Small-Signal Analysis\n\nFor AC, $V_{DD}$ = ground. The small-signal model of $M_2$ (diode-connected, source grounded) is a resistance:\n\n$$R_{M2} = \\frac{1}{g_{m2}} \\,\\|\\, r_{o2}$$\n\n$M_1$ contributes its transconductance $g_{m1}$ and output resistance $r_{o1}$.\n\nThe total resistance at $V_{out}$ is:\n$$R_{out} = r_{o1} \\,\\|\\, R_{M2} \\approx \\frac{1}{g_{m2}} \\quad (\\text{since } 1/g_m \\ll r_o)$$\n\nThe small-signal voltage gain is:\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} R_{out} = -g_{m1}\\left(r_{o1} \\,\\|\\, \\frac{1}{g_{m2}} \\,\\|\\, r_{o2}\\right)}$$\n\nBecause $g_{m2}$ is usually much larger than $g_{o1},g_{o2}$:\n$$\\boxed{A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{k_n}{k_p}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}}$$\n\n**Key point:** The gain is **moderate/low** (typically between $\\approx -1$ and $-5$). It is set by the transistor size ratio, not by $r_o$.\n\n- **Input resistance:** $R_{in} = \\infty$ (MOS gate).\n- **Output resistance:** $R_{out} \\approx 1/g_{m2}$.\n\n---\n\n## 3. Physical Interpretation & Design Notes\n\n| Feature | Consequence |\n|--------|-------------|\n| $M_2$ diode-connected | Guarantees $M_2$ stays in saturation; acts as a nonlinear load resistor $\\approx 1/g_{m2}$. |\n| $V_{OH} = V_{DD}-|V_{thp}|$ | **Logic-high degradation**: output cannot reach $V_{DD}$. This limits noise margins in digital use. |\n| Constant $A_v$ in middle region | The VTC is **linear** over a range (unlike a CMOS inverter whose gain peaks sharply). |\n| Low gain ($\\sim \\sqrt{k_n/k_p}$) | Good for **amplifiers needing linearity/low gain**, or as a **current mirror / diode reference**; poor for high-gain stages (use current-source load instead for $A_v \\approx -g_m r_o$). |\n| $M_1$ source grounded | No body effect on $M_1$; $V_{thn}$ constant. |\n\n---\n\n### One-Line Summary\n> **$M_1$ is a common-source NMOS driver; $M_2$ is a diode-connected PMOS active load. The circuit provides a nearly linear DC transfer characteristic with constant small-signal gain $A_v \\approx -\\sqrt{k_n/k_p}$, but the high output is degraded to $V_{DD}-|V_{thp}|$ and the overall voltage gain is modest because the load resistance is $\\approx 1/g_{m2}$.**",
        "format": "markdown",
        "sha256": "bfd0c0c84bc78021220a21e6d9ccf9456441a0121ba39376ae5034106d5e477b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain both with consistent output-resistance terms and in the usual −gm1/gm2 approximation. The additional analysis does not undermine the essential result.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 22455,
        "total_tokens": 23965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 22455,
        "total_tokens": 23965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **common‑source (CS) amplifier with a diode‑connected PMOS active load**.\n\n| Component | Role | Key connections |\n|-----------|------|---------------|\n| **M₁** | NMOS driver (input transistor) | Gate = $V_{in}$; Source = GND; Drain = $V_{out}$ |\n| **M₂** | PMOS load transistor | Source = $V_{DD}$; Drain = $V_{out}$; **Gate tied to its own drain** (diode‑connected) |\n\nBecause $M_2$’s gate is shorted to its lower terminal ($V_{out}$), it operates as a **two‑terminal nonlinear resistor** (like a diode). The DC current through $M_1$ and $M_2$ is identical: $I_{D1}=I_{D2}=I_D$.\n\n---\n\n### 1. DC Analysis (both in saturation)\n\nUsing the square‑law model ($\\lambda=0$ for simplicity):\n\n**M₁ (NMOS):**\n$$I_D = \\frac{1}{2}k_n\\left(V_{in}-V_{thn}\\right)^2, \\qquad k_n=\\mu_nC_{ox}(W/L)_1$$\n\n**M₂ (PMOS):**\n$$I_D = \\frac{1}{2}k_p\\left(V_{SG2}-|V_{thp}|\\right)^2, \\qquad k_p=\\mu_pC_{ox}(W/L)_2$$\nwhere $V_{SG2}=V_{DD}-V_{out}$.\n\nBecause $M_2$ is diode‑connected, $V_{SD2}=V_{SG2}$, so it is always in saturation (provided $V_{SG2}\\ge |V_{thp}|$).\n\nSolving for $V_{out}$:\n$$\\sqrt{I_D} = \\sqrt{\\frac{k_n}{2}}\\left(V_{in}-V_{thn}\\right) = \\sqrt{\\frac{k_p}{2}}\\left(V_{DD}-V_{out}-|V_{thp}|\\right)$$\n\nThis gives a **linear DC transfer characteristic**:\n$$\\boxed{V_{out} = V_{DD}-|V_{thp}| - \\sqrt{\\frac{k_n}{k_p}}\\left(V_{in}-V_{thn}\\right)}$$\n\n* **Valid range:** $V_{in}\\in[V_{thn},\\; V_{thn}+\\frac{V_{DD}-|V_{thp}|}{1+\\sqrt{k_n/k_p}}]$ so that $M_1$ remains saturated ($V_{DS1}\\ge V_{GS1}-V_{thn}$).\n* At $V_{in}=V_{thn}$: $I_D=0$, $V_{out}\\to V_{DD}$ (ideally).\n* As $V_{in}$ rises, $V_{out}$ falls with a **constant slope** $- \\sqrt{k_n/k_p}$.\n\n---\n\n### 2. Small‑Signal Analysis\n\nSet $V_{DD}$ to AC ground. The small‑signal model is:\n\n* **M₁:** Voltage‑controlled current source $g_{m1}v_{gs1}=g_{m1}v_{in}$, output resistance $r_{o1}$.\n* **M₂:** Diode‑connected PMOS → acts as a resistance between $V_{out}$ and AC ground:\n  $$R_{M2} = \\frac{v_{out}}{i_{d2}} = \\frac{1}{g_{m2}+1/r_{o2}} = r_{o2}\\,\\parallel\\,\\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n\nBecause both bodies are tied to their sources ($V_{SB1}=0$, $V_{SB2}=0$), **body effect is absent** ($g_{mb}=0$).\n\nThe total load resistance at $V_{out}$ is:\n$$R_{out} = r_{o1} \\parallel R_{M2} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}$$\n\nSince $g_{m}r_o \\gg 1$ typically, $R_{out}\\approx 1/g_{m2}$.\n\n**Voltage gain:**\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}R_{out} \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nUsing $g_m=\\sqrt{2kI_D}$:\n$$\\boxed{A_v \\approx -\\sqrt{\\frac{k_n}{k_p}} = -\\sqrt{\\frac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}}$$\n\n**Input resistance:** $R_{in}=\\infty$ (MOS gate).\n\n**Output resistance:** $R_{out}\\approx 1/g_{m2}$ (low, set by the diode load).\n\n---\n\n### 3. Key Observations\n\n| Feature | Value / Comment |\n|---|---|\n| **Gain** | Moderate: $|A_v|\\approx \\sqrt{(W/L)_1/(W/L)_2}\\times\\sqrt{\\mu_n/\\mu_p}$, typically **2–10** (not high like a cascode). |\n| **Linearity** | DC $V_{out}$ vs $V_{in}$ is linear in saturation; small‑signal gain is constant over the bias range. |\n| **Output impedance** | Low ($\\sim 1/g_{m2}$); this circuit is **not** good for high gain but is useful as a level‑shifter or when a well‑defined, moderate gain is needed. |\n| **Comparison** | If $M_2$ were replaced by a **current‑source load** (e.g., PMOS with fixed $V_{GS}$), $R_{out}$ would be $\\approx r_{o1}||r_{o2}$ and gain $\\approx -g_{m1}r_o$ (much larger). The diode connection trades gain for simplicity and linearity. |\n\nIn summary: **This is a linear, moderate‑gain CS stage**. Its gain is set entirely by the transistor sizing ratio and mobility ratio, not by channel‑length modulation ($r_o$), because the diode load “swamps” the output resistance with $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "60a75839ecfba4a1bfbe1a5a4bb99f6b88984c0bb6dafbb7cad830cb038b4a60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including a consistent expression with both devices’ output resistances.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 17610,
        "total_tokens": 19120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 17610,
        "total_tokens": 19120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe figure shows a two-transistor stack between the supply rail **VDD** and ground:\n\n* **M₂** (upper device): Gate = **V_in**, Source = **V_out**, Drain = **VDD**.\n* **M₁** (lower device): Gate = **GND**, Source = **GND**, Drain = **V_out**.\n\nFrom the arrow convention (arrow on the source, pointing toward the channel) both devices are **NMOS** transistors.  \nBecause **M₁** is forced to operate with **V_GS1 = 0**, it must be a **depletion-mode NMOS** (threshold **V_th1 < 0**); otherwise it would be off and no DC current could flow. **M₂** is an **enhancement-mode NMOS** (**V_th2 > 0**).\n\n> **Topology:** **NMOS common-drain (source-follower) amplifier** with a **depletion-NMOS current-sink load** (M₁).\n\n---\n\n## 1. DC (Large-Signal) Analysis\n\nAssume long-channel behavior and neglect channel-length modulation (λ = 0) for simplicity; we add λ later for small-signal corrections.\n\n### Transistor currents\n**M₁ (load):**  \n$$V_{GS1}=0 \\;\\Rightarrow\\; V_{GS1}-V_{th1}=-V_{th1}>0$$\nIn saturation ($V_{DS1}\\ge -V_{th1}$):\n$$I_{D1}=I_{D0}=\\frac{1}{2}k_{n1}( -V_{th1})^2\n\\quad\\text{(constant)}$$\n\n**M₂ (input):**  \n$$V_{GS2}=V_{in}-V_{out}$$\nIn saturation ($V_{DS2}\\ge V_{GS2}-V_{th2}$, always true here because $V_{DD}\\ge V_{in}-V_{th2}$):\n$$I_{D2}=\\frac{1}{2}k_{n2}(V_{GS2}-V_{th2})^2$$\n\n### DC operating-point equation\nBecause the two transistors are in series:\n$$I_{D1}=I_{D2}=I_D$$\n\nSolving for the required gate-source voltage of M₂:\n$$V_{GS2}=V_{th2}+\\sqrt{\\frac{2I_D}{k_{n2}}}\\equiv V_{th2}+V_{ov2}$$\n\nHence the DC output is:\n$$\\boxed{V_{out}=V_{in}-V_{GS2}=V_{in}-\\left(V_{th2}+V_{ov2}\\right)}$$\n\n**Interpretation:**  \nFor any $V_{in}$ that keeps M₂ saturated, $V_{GS2}$ is pinned by the constant load current $I_D$. Therefore **V_out tracks V_in with a fixed DC offset** (the classic source-follower behavior).\n\n### Regions of the VTC\n| Region | Condition | Behavior |\n|--------|-----------|----------|\n| **M₂ cutoff** | $V_{in}<V_{th2}$ (with $V_{out}=0$) | $I_D=0$, so $V_{out}=0$ |\n| **M₁ triode / M₂ sat.** | $V_{th2}<V_{in}<V_{th2}+V_{ov2}+|V_{th1}|$ | Non-linear; $V_{out}$ rises from 0 |\n| **Both saturated** | $V_{in}\\ge V_{th2}+V_{ov2}+|V_{th1}|$ | **Linear:** $V_{out}=V_{in}-\\text{const.}$ (slope ≈ 1) |\n\n*Upper bound:* Because $V_{GS2}\\le V_{DD}$ (max $V_{in}$), $V_{out}$ cannot fall below $V_{DD}-V_{GS2}$; it remains in saturation throughout the useful range.\n\n---\n\n## 2. Small-Signal Analysis\n\nUse the small-signal model ($v_{in}$, $v_{out}$; DC supplies are AC ground):\n\n* **M₂:** $g_{m2}$, $r_{o2}$ between drain (GND) and source ($v_{out}$).  \n  $v_{gs2}=v_{in}-v_{out}$.\n* **M₁:** Because $v_{gs1}=0$ (gate and source grounded), it contributes **only** its output resistance $r_{o1}$.\n\n### Nodal equation at $V_{out}$\n$$\\frac{v_{out}}{r_{o1}}+\\frac{v_{out}}{r_{o2}}-g_{m2}v_{gs2}=0$$\nSubstitute $v_{gs2}=v_{in}-v_{out}$:\n$$v_{out}(g_{ds1}+g_{ds2}+g_{m2})=g_{m2}v_{in}$$\n\n### Voltage gain\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m2}}{g_{m2}+g_{ds1}+g_{ds2}}}$$\n\nIf $\\lambda\\approx 0$ ($r_o\\to\\infty$):\n$$\\boxed{A_v \\approx 1}$$\n\nWith finite $\\lambda$ ($g_{ds}= \\lambda I_D$):\n$$A_v \\approx \\frac{g_{m2}}{g_{m2}+2\\lambda I_D} < 1$$\nTypically $A_v \\approx 0.8\\!-\\!0.9$.\n\n### Input resistance\n$$R_{in}=\\infty \\quad (\\text{MOS gate is insulated})$$\n\n### Output resistance\nLooking into the source of M₂ with $v_{in}=0$:\n$$\\boxed{R_{out}=\\frac{1}{g_{m2}+g_{ds2}+g_{ds1}}\n\\approx \\frac{1}{g_{m2}}}$$\n\n---\n\n## 3. Key Features & Design Insights\n\n| Feature | Expression / Value | Comment |\n|---|---|---|\n| **Gain** | $\\approx 1$ (slightly $<1$ due to $\\lambda$) | Non-inverting buffer |\n| **DC level shift** | $\\Delta V = V_{th2}+V_{ov2}$ | $V_{out}$ sits below $V_{in}$ by $\\sim$ 0.7–1 V |\n| **Input impedance** | $\\infty$ | Excellent for driving high-impedance stages |\n| **Output impedance** | $\\approx 1/g_{m2}$ | Low (good for driving capacitive loads) |\n| **Linearity** | Very high in “both-sat” region | $V_{out}$ is a linear copy of $V_{in}$ |\n| **Current consumption** | $I_D = I_{D0}$ (set by M₁ geometry) | Static power is constant |\n\n### Why M₁ must be depletion-mode\nIf M₁ were enhancement ($V_{th1}>0$), $V_{GS1}=0$ would put it in **cutoff** ($I_D=0$). Then M₂ could not conduct (series connection), so $V_{out}$ would either float to $V_{DD}$ or collapse to 0 depending on leakage—not a useful amplifier.\n\n---\n\n## 4. Summary\n\nThe circuit is a **source follower (common-drain) stage** with an **NMOS depletion load**:\n\n* **M₂** converts $V_{in}$ into a current via $g_{m2}$ and delivers it to the output node.\n* **M₁** acts as a **constant-current sink** ($I_D$ fixed by $V_{GS1}=0$ and $V_{th1}<0$).\n* The DC transfer characteristic is a **straight line of slope ≈ 1** over the active range.\n* The small-signal gain is **unity (or slightly less)**, the input resistance is **infinite**, and the output resistance is **low ($\\sim 1/g_{m2}$)**.\n\nThis topology is widely used as a **voltage buffer / level shifter** in NMOS analog IC design (and in modern CMOS as the dual PMOS common-source + NMOS active-load stage with roles exchanged).\n\nIf you need the **exact numeric values** (e.g., $V_{out}$ for a specific $W/L$ ratio, $V_{th}$, or a given $I_D$), provide the transistor parameters ($k_n$, $V_{th}$, $\\lambda$, $W/L$) and the bias current; the equations above can be solved directly.",
        "format": "markdown",
        "sha256": "2e84b1917eecba1713c1fe39a8ef5d759230b4dd7c2f77d28f5fdd94605e807d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both devices as NMOS and treats the circuit as a source follower with a depletion-load current sink. The actual circuit is a PMOS common-source stage with a diode-connected PMOS load, giving approximately Av = -gm2/gm1; the candidate’s topology and gain are fundamentally wrong.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 27017,
        "total_tokens": 29174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 27017,
        "total_tokens": 29174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure shows a **single-stage common-source (CS) amplifier with an active (current-source) load** — a classic analog building block used in CMOS integrated circuits to obtain high voltage gain.\n\nBelow is a complete analysis: transistor identification, DC operating conditions, small-signal model, and the key design equations.\n\n---\n\n### 1. Circuit Identification\n\n| Transistor | Connection | Type (from symbol / terminals) | Role |\n|---|---|---|---|\n| **M₂** | Source → $V_{DD}$, Drain → $V_{out}$, Gate → $V_{in}$ | **PMOS** (arrow on source terminal at $V_{DD}$) | **Amplifying device** (common-source stage) |\n| **M₁** | Source → GND, Drain → $V_{out}$, Gate → GND | **NMOS** (arrow on source terminal at GND) | **Load / current sink** ($V_{GS1}=0$) |\n\nBecause M₁’s gate and source are both grounded, its gate–source voltage is fixed:\n$$V_{GS1} = 0$$\n\nFor M₁ to actually conduct DC current in saturation with $V_{GS}=0$, it **must be a depletion-mode NMOS** ($V_{thn}<0$). If it were enhancement-mode ($V_{thn}>0$), M₁ would be cut off and $V_{out}$ would rail to $V_{DD}$ (or float). Thus, for active amplification we assume:\n\n* **M₁:** Depletion NMOS, threshold $V_{thn}<0$, current $I_D$ set by $V_{GS1}=0$.\n* **M₂:** PMOS (enhancement), threshold $V_{thp}<0$, $|V_{thp}|>0$.\n\nThe two devices are stacked in series:\n$$V_{DD} \\;\\xrightarrow{\\text{M}_2}\\; V_{out} \\;\\xrightarrow{\\text{M}_1}\\; \\text{GND}$$\n\nBecause they are in series, the DC current is identical:\n$$I_{D2} = I_{D1} \\equiv I_D$$\n\n---\n\n### 2. DC Analysis\n\n**M₂ (PMOS)** — operates with $V_{SG2} = V_{DD} - V_{in}$ and $V_{SD2} = V_{DD} - V_{out}$.\nIn saturation:\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left(V_{SG2} - |V_{thp}|\\right)^2 \\left(1+\\lambda_p V_{SD2}\\right)$$\n\n**M₁ (NMOS depletion)** — operates with $V_{GS1}=0$ and $V_{DS1}=V_{out}$.\nIn saturation:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(V_{GS1} - V_{thn}\\right)^2 \\left(1+\\lambda_n V_{DS1}\\right)$$\n$$= \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(-V_{thn}\\right)^2 \\left(1+\\lambda_n V_{out}\\right)$$\n\nBecause $I_D$ depends on $V_{out}$ through $\\lambda_n$, the two current equations can be solved simultaneously for the quiescent point $(V_{in,Q}, V_{out,Q})$.\n\n**Saturation conditions:**\n* **M₂:** $V_{SD2} \\ge V_{SG2} - |V_{thp}| \\;\\Rightarrow\\; V_{DD}-V_{out} \\ge (V_{DD}-V_{in}) - |V_{thp}|$\n* **M₁:** $V_{DS1} \\ge V_{GS1} - V_{thn} \\;\\Rightarrow\\; V_{out} \\ge -V_{thn} = |V_{thn}|$\n\nIf either transistor enters triode, the gain collapses; the design must keep both in saturation.\n\n---\n\n### 3. Small-Signal Analysis\n\nWe linearize around the DC operating point.\n\n* **M₂:** Gate is driven by $v_{in}$; source is at AC ground ($V_{DD}$). Its small-signal model is a transconductance $g_{m2}$ plus output resistance $r_{o2}$.\n  $$g_{m2} = \\frac{\\partial I_D}{\\partial V_{SG2}} = \\sqrt{2\\mu_p C_{ox}(W/L)_2 I_D} \\;(\\approx \\sqrt{2\\mu_p C_{ox}(W/L)_2 I_D(1+\\lambda_p V_{SD2})})$$\n  $$r_{o2} = \\frac{1}{\\lambda_p I_D}$$\n\n* **M₁:** Gate and source are both at AC ground ($v_{gs1}=0$). Therefore its $g_{m1}$ contributes **zero** current; it appears only as its drain resistance $r_{o1}$.\n  $$r_{o1} = \\frac{1}{\\lambda_n I_D}$$\n\nThe small-signal equivalent at node $V_{out}$ is therefore:\n\n* A controlled source from M₂ injecting current into $V_{out}$. Using $v_{sg2} = -v_{in}$:\n  $$i_{d2} = g_{m2}v_{sg2} = -g_{m2}v_{in} \\quad (\\text{directed S}\\to\\text{D})$$\n  Equivalently, from the $V_{out}$ node perspective, it pulls current $g_{m2}v_{in}$ toward $V_{DD}$.\n* Two resistors to AC ground: $r_{o2}$ to $V_{DD}$ and $r_{o1}$ to GND.\n\nApplying KCL at $V_{out}$:\n$$\\frac{v_{out}}{r_{o2}} + \\frac{v_{out}}{r_{o1}} + g_{m2}v_{in} = 0$$\n\nSolving for the voltage gain:\n\n$$\\boxed{A_v \\equiv \\frac{v_{out}}{v_{in}} = -g_{m2}\\left(r_{o1} \\parallel r_{o2}\\right)}$$\n\n---\n\n### 4. Key Performance Metrics\n\n| Parameter | Expression | Comment |\n|---|---|---|\n| **Voltage gain** | $A_v = -g_{m2}(r_{o1}\\|r_{o2})$ | High because $r_{o1}, r_{o2}$ are large ($\\propto 1/\\lambda$). |\n| **Output resistance** | $R_{out} = r_{o1} \\parallel r_{o2}$ | The node is high-impedance; this is why gain is high. |\n| **Input resistance** | $R_{in} = \\infty$ (gate of M₂) | Ideal for cascading stages. |\n| **Intrinsic gain of M₂** | $g_{m2}r_{o2}$ | Often $|A_v| \\approx g_{m2}r_{o2}/2$ if $r_{o1}\\approx r_{o2}$. |\n\nBecause both $r_{o1}$ and $r_{o2}$ are inversely proportional to $\\lambda$ (channel-length modulation), using **long-channel devices** (or adding cascode devices) pushes $R_{out}$ toward $10^4$–$10^5\\,\\Omega$ and yields gains of $20$–$60$ dB.\n\n---\n\n### 5. Operating Regions & Design Insight\n\n* **M₁ as a current source:** Because $V_{GS1}$ is fixed at 0, M₁ behaves like a **current sink** whose value is set by its depletion threshold and aspect ratio. As $V_{out}$ varies, $I_D$ adjusts slightly through $\\lambda_n$, allowing the DC node to settle at a unique $V_{out}$ for each $V_{in}$.\n* **Why not enhancement-mode for M₁?** If $V_{thn}>0$, M₁ is off. Then $I_D=0$, forcing $V_{in}$ to be high enough that M₂ is also off ($V_{SG2}<|V_{thp}|$). The circuit would function as a **digital switch**, not a linear amplifier.\n* **Body effect:** Both transistors have $V_{SB}=0$ (M₂ source at $V_{DD}$, body also at $V_{DD}$; M₁ source at GND, body at GND). Hence $\\gamma=0$; no body-effect threshold shift occurs.\n\n---\n\n### 6. Summary\n\nThis is a **PMOS common-source amplifier loaded by a depletion NMOS current sink** ($M_1$). The DC current is determined by the intersection of M₂’s $V_{SG}$-controlled current and M₁’s $V_{GS}=0$ fixed current. The small-signal voltage gain is:\n\n$$\\boxed{A_v = -g_{m2}\\left(r_{o1}\\parallel r_{o2}\\right)}$$\n\nThe topology achieves **high gain** because both devices present very high output resistances to the $V_{out}$ node. It is conceptually identical to the “current-source-loaded CS stage” used extensively in op-amp input stages and analog signal processing blocks.\n\nIf you have specific device parameters ($W/L$, $\\mu C_{ox}$, $\\lambda$, $V_{th}$) or a particular question (e.g., find $V_{out,Q}$, compute $A_v$, find the input range for saturation), provide them and I can compute the exact numerical result!",
        "format": "markdown",
        "sha256": "a2bbe8adb47070e891d51ddfa53ee4eed22233c950fcf419bb9b9a462ebfd5a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a depletion NMOS current sink instead of a diode-connected PMOS load. That removes M1’s dominant small-signal transconductance and leads to the wrong gain model; identifying M2 correctly does not fix the central topology error.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 20341,
        "total_tokens": 22498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 20341,
        "total_tokens": 22498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, we have a **two-transistor stacked CMOS structure** between the supply rails:\n\n* **M₂** is a **PMOS** transistor: Source → **VDD**, Gate → **Vᵢₙ**, Drain → **Vₒᵤₜ**.\n* **M₁** is an **NMOS** transistor: Drain → **Vₒᵤₜ**, Source → **GND**, and—crucially—its **Gate is tied to its Drain (Vₒᵤₜ)**, so it is **diode-connected**. The two ground symbols at the bottom are the NMOS source and body (substrate), both at AC/DC ground, so M₁ has **no body effect**.\n\nThis is a classic **common-source amplifier with a diode-connected NMOS load** (sometimes called a *PMOS common-source stage with diode-connected load*).\n\n---\n\n## 1. DC Operating-Point Analysis\n\nAssume long-channel square-law behavior and that both devices operate in **saturation**.\n\n| Transistor | Current equation (saturation) |\n|------------|------------------------------|\n| **M₂ (PMOS)** | $I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left(V_{SG2}-|V_{thp}|\\right)^2 = \\frac{1}{2}k_p\\left(V_{DD}-V_{in}-|V_{thp}|\\right)^2$ |\n| **M₁ (NMOS)** | $I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(V_{GS1}-V_{thn}\\right)^2 = \\frac{1}{2}k_n\\left(V_{out}-V_{thn}\\right)^2$ |\n\nBecause the devices are in series, $I_{D2}=I_{D1}\\equiv I_D$. Equating the two expressions and solving for $V_{out}$ gives the **DC transfer characteristic**:\n\n$$\\boxed{V_{out} = V_{thn} + \\sqrt{\\frac{k_p}{k_n}}\\;\\left(V_{DD}-V_{in}-|V_{thp}|\\right)}$$\n\nwhere $k_{p,n}=\\mu_{p,n}C_{ox}(W/L)_{2,1}$.\n\n### Region boundaries\n* **M₁ (NMOS diode)**: Because $V_{DS1}=V_{GS1}=V_{out}$, the condition $V_{DS1}\\ge V_{GS1}-V_{thn}$ is always satisfied (equality holds). So M₁ is always in **saturation** as long as $V_{out}>V_{thn}$ (i.e., $I_D>0$).\n* **M₂ (PMOS)**: Requires $V_{SD2}\\ge V_{SG2}-|V_{thp}|$, i.e.\n  $$V_{DD}-V_{out} \\;\\ge\\; V_{DD}-V_{in}-|V_{thp}| \\quad\\Rightarrow\\quad V_{out} \\le V_{in}+|V_{thp}|.$$\n\n**Behavior with $V_{in}$:**\n* When $V_{in}$ is high ($V_{in}\\ge V_{DD}-|V_{thp}|$): $V_{SG2}\\le|V_{thp}|$, so **M₂ is off** ($I_D=0$). The diode M₁ also turns off, so $\\boxed{V_{out}\\approx 0}$.\n* As $V_{in}$ drops below $V_{DD}-|V_{thp}|$: M₂ turns on, current flows, and $V_{out}$ rises **linearly** with $V_{in}$ (because of the square-law cancellation above).\n* At very low $V_{in}$ (large $V_{SG2}$), $V_{out}$ becomes large enough that M₂ enters **triode** (the inequality above fails); then $I_D$ is set by M₂’s linear-region equation and $V_{out}$ approaches $V_{DD}$ asymptotically.\n\n---\n\n## 2. Small-Signal Analysis\n\nFor AC signals, $V_{DD}$ is ground. The small-signal model at the output node $V_{out}$ contains:\n\n* **M₂ (PMOS)**: $v_{sg2} = v_s - v_g = 0 - v_{in} = -v_{in}$. It contributes a current source $g_{m2}v_{sg2} = -g_{m2}v_{in}$ from source to drain, plus its output resistance $r_{o2}$ to ground.\n* **M₁ (diode-connected NMOS)**: $v_{gs1}=v_{out}$. Its small-signal impedance to ground is that of a diode-connected device:\n  $$R_1 = \\frac{1}{g_{m1}+g_{ds1}} = \\frac{1}{g_{m1}+1/r_{o1}}.$$\n  (The current source $g_{m1}v_{out}$ is in parallel with $r_{o1}$.)\n\nApplying KCL at $V_{out}$:\n\n$$-g_{m2}v_{in} = v_{out}\\left(g_{ds2}+g_{m1}+g_{ds1}\\right)$$\n\nHence the **voltage gain** is:\n\n$$\\boxed{A_v \\equiv \\frac{v_{out}}{v_{in}} = -\\frac{g_{m2}}{g_{m1}+g_{ds1}+g_{ds2}}}$$\n\n### Approximations\nBecause $g_{ds} \\ll g_m$ (i.e., $r_o \\gg 1/g_m$):\n\n$$\\boxed{A_v \\approx -\\frac{g_{m2}}{g_{m1}}}$$\n\nSince $g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}$, the gain magnitude is set by device sizing and mobility:\n\n$$\\left|A_v\\right| \\approx \\sqrt{\\frac{\\mu_p (W/L)_2}{\\mu_n (W/L)_1}}$$\n\nBecause $\\mu_n \\approx 2$–$3\\,\\mu_p$, the gain is typically **moderate** (often $|A_v|\\sim 1$ to $3$), not the very high gain of a current-source-loaded common-source stage.\n\n---\n\n## 3. Input and Output Impedances\n\n* **Input impedance** ($R_{in}$): The gate of M₂ is insulated; $R_{in}\\approx \\infty$.\n* **Output impedance** ($R_{out}$): Looking into $V_{out}$, we see $r_{o2}$ in parallel with the diode-connected load:\n  $$\\boxed{R_{out} = r_{o2} \\;\\parallel\\; \\frac{1}{g_{m1}+g_{ds1}} \\approx \\frac{1}{g_{m1}}}$$\n\nThus the stage is a **low-gain, low-output-impedance** amplifier.\n\n---\n\n## 4. Key Takeaways\n\n| Feature | Result |\n|---|---|\n| **Topology** | PMOS common-source (M₂) + diode-connected NMOS load (M₁) |\n| **DC transfer** | Approximately linear: $V_{out} \\propto (V_{DD}-V_{in})$ while both are saturated |\n| **Gain** | $A_v \\approx -g_{m2}/g_{m1}$ (negative, magnitude $\\sim$ 1–3 typically) |\n| **Output resistance** | $\\approx 1/g_{m1}$ (low) |\n| **Use** | Level shifting, low-voltage gain stages, or as a **load element** in NMOS logic; also used in current-mirror reference branches where a diode-connected transistor establishes a $V_{GS}$ reference |\n\nIf your figure was instead intended to show **M₁’s gate also tied to $V_{in}$** (the standard CMOS inverter), the analysis changes to the classic **CMOS inverter VTC**: both devices share $I_D$, the DC characteristic is highly nonlinear, and the small-signal gain at the switching midpoint becomes very high ($A_v \\approx -g_{m1}r_{o1}\\parallel r_{o2}$). But based on the drawing—where M₁’s gate connects to $V_{out}$—the diode-connected analysis above is the correct interpretation.",
        "format": "markdown",
        "sha256": "52e63cbee446263927e1704334680af4ef1356a2ed26bfa801502c7d3e5492d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as a common-source input device and obtains the inverting gm/gm small-signal gain. But it misidentifies M1 and its connections: the actual load is a PMOS with gate and drain at ground, not an NMOS with gate and drain at Vout. Its DC equations and operating-point conclusions therefore analyze a different circuit.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24282,
        "total_tokens": 26439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24282,
        "total_tokens": 26439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a **cascode stack** between the supply \\(V_{DD}\\) and the output port (the node where the test current is injected).  \nTo find the small‑signal output resistance \\(R_{out}\\) we:\n\n1. **Turn off all DC sources**:  \n   \\(V_{DD}\\to 0\\), \\(V_{b1}\\to 0\\), \\(V_{b2}\\to 0\\).\n\n2. **Identify the small‑signal roles of the two transistors**:\n\n| Transistor | Source (AC) | Gate (AC) | \\(v_{gs}\\) | Small‑signal model |\n|------------|-------------|-----------|------------|-------------------|\n| **\\(M_2\\)** (upper, connected to \\(V_{DD}\\)) | \\(V_{DD}\\) = ground | 0 | \\(v_{gs2}=0\\) | Only its output resistance \\(r_{o2}\\) between node **X** and ground |\n| **\\(M_1\\)** (lower, source at node **X**) | Node **X** (voltage \\(v\\)) | 0 | \\(v_{gs1}=-v\\) | Resistor \\(r_{o1}\\) between output node \\(V_x\\) and **X**, plus a controlled source \\(g_{m1}v_{gs1}\\) |\n\nSo \\(M_2\\) acts as a simple resistor \\(r_{o2}\\); the “boost” comes from \\(M_1\\) because its source sits at the intermediate node **X**.\n\n3. **Apply a test voltage** \\(V_x\\) at the bottom port and find the current \\(I_x\\) that enters the stack.\n\nLet \\(v\\) be the small‑signal voltage at node **X**.\n\n- Current leaving **X** to ground through \\(M_2\\): \\(\\displaystyle \\frac{v}{r_{o2}}\\)\n- Current through \\(M_1\\) from \\(V_x\\) to **X**: \\(\\displaystyle \\frac{V_x-v}{r_{o1}}+g_{m1}v_{gs1}=\\frac{V_x-v}{r_{o1}}-g_{m1}v\\)\n\nKCL at node **X**:\n\n\\[\n\\frac{v}{r_{o2}}=\\frac{V_x-v}{r_{o1}}-g_{m1}v\n\\]\n\nSolve for \\(v\\):\n\n\\[\nV_x\\frac{1}{r_{o1}} = v\\!\\left(g_{m1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)\n\\;\\;\\Longrightarrow\\;\\;\nv = \\frac{V_x}{r_{o1}}\\left(g_{m1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)^{-1}\n\\]\n\nThe port current is the same as the current through \\(r_{o2}\\):\n\n\\[\nI_x = \\frac{v}{r_{o2}}\n\\]\n\nTherefore\n\n\\[\nR_{out}=\\frac{V_x}{I_x}\n       = r_{o2}\\,r_{o1}\\!\\left(g_{m1}+\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right)\n\\]\n\n\\[\n\\boxed{R_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nBecause for a MOSFET \\(g_{m}r_{o}\\gg 1\\), the dominant term is the product:\n\n\\[\n\\boxed{R_{out}\\approx g_{m1}\\,r_{o1}r_{o2}}\n\\]\n\n*(If body effect of \\(M_1\\) is included, replace \\(g_{m1}\\to g_{m1}+g_{mb1}\\).)*\n\nSo the stack gives an output resistance boosted by the intrinsic gain of the cascode transistor \\(M_1\\).",
        "format": "markdown",
        "sha256": "7c5c2931b649679cc1a78712df306a6acc7bbf10c4f33d85196cf25306527d05"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the full output-resistance expression and approximation. The golden solution allows full credit without explicitly naming the devices as PMOS; body effect is optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 22456,
        "total_tokens": 24507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 22456,
        "total_tokens": 24507,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small‑signal output resistance \\(R_{out}\\) seen at the lower port (the node labeled \\(R_{out}\\)):\n\n1. **Turn off all DC sources**  \n   - \\(V_{DD}\\) becomes AC ground.  \n   - The bias voltages \\(v_{b1},v_{b2}\\) are constant \\(\\Rightarrow\\) their small‑signal values are 0.\n\n2. **Identify the transistor terminals**  \n   - **\\(M_2\\)** (upper): its source is at \\(V_{DD}\\) (AC ground) and its gate is grounded \\(\\Rightarrow v_{gs2}=0\\).  \n     Hence \\(M_2\\) contributes **only** its output resistance \\(r_{o2}\\) between node \\(X\\) and ground.\n   - **\\(M_1\\)** (lower, the cascode device): its source is node \\(X\\), its drain is the output port, and its gate is grounded \\(\\Rightarrow v_{gs1}=-v_X\\).  \n     Because the body of \\(M_1\\) is tied to \\(V_{DD}\\) (for PMOS) or to ground (for NMOS) while its source sits at \\(X\\), the body effect is active: add \\(g_{mb1}v_{bs1}\\).  \n     So the effective transconductance of \\(M_1\\) is  \n     \\[\n     g_{m1}+g_{mb1}.\n     \\]\n\n3. **Small‑signal model**\n   - Between \\(X\\) and ground: resistor \\(r_{o2}\\).\n   - Between output node (\\(v_t\\)) and \\(X\\): resistor \\(r_{o1}\\) in parallel with a current source  \n     \\[\n     i_{d1}=(g_{m1}+g_{mb1})v_X\n     \\]\n     directed from the output toward \\(X\\).\n\n4. **Apply a test voltage** \\(v_t\\) at the port and write KCL at node \\(X\\):\n   \\[\n   \\frac{v_X}{r_{o2}}+\\frac{v_X-v_t}{r_{o1}}+(g_{m1}+g_{mb1})v_X=0 .\n   \\]\n\n   Solve for \\(v_X\\):\n   \\[\n   v_X\\!\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}+g_{m1}+g_{mb1}\\right)=\\frac{v_t}{r_{o1}}\n   \\]\n   \\[\n   v_X=\\frac{v_t/r_{o1}}{\\displaystyle\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}+g_{m1}+g_{mb1}} .\n   \\]\n\n5. **Port current** \\(i_t\\) (entering the port, i.e. upward):\n   \\[\n   i_t=\\frac{v_t-v_X}{r_{o1}}+(g_{m1}+g_{mb1})v_X .\n   \\]\n\n   Substituting \\(v_X\\) and simplifying gives\n   \\[\n   i_t=\\frac{v_t}{\\,r_{o1}+r_{o2}+(g_{m1}+g_{mb1})r_{o1}r_{o2}\\,}.\n   \\]\n\n6. **Output resistance**\n   \\[\n   \\boxed{%\n   R_{out}=\\frac{v_t}{i_t}=r_{o1}+r_{o2}+(g_{m1}+g_{mb1})\\,r_{o1}r_{o2}\n   }\n   \\]\n\n---\n\n### Final result (with usual approximation)\n\nBecause for a cascode device \\(g_{m}r_o\\gg 1\\),\n\n\\[\n\\boxed{%\nR_{out}\\approx (g_{m1}+g_{mb1})\\,r_{o1}r_{o2}\n}\n\\]\n\n- If body effect is neglected (\\(\\gamma=0\\Rightarrow g_{mb1}=0\\)):\n  \\[\n  R_{out}\\approx g_{m1}\\,r_{o1}r_{o2}.\n  \\]\n\nSo the key point is: **\\(M_2\\) acts only as \\(r_{o2}\\)** because \\(v_{gs2}=0\\); **\\(M_1\\) provides the \\(g_m\\) boosting** because its source sits at the intermediate node \\(X\\).",
        "format": "markdown",
        "sha256": "ebeccefa2d3b41945857291c21b832e62c6ec60faa25c4c2a6634c51f538c20b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies M1 as the cascode device and gives the correct full Rout expression and approximation. This meets the golden solution’s full-credit rule; body effect is optional.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 29497,
        "total_tokens": 31548,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 29497,
        "total_tokens": 31548,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23730,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a **cascode (stacked) current-source branch**.  \nTo find the small‑signal output resistance \\(R_{out}\\) we treat the DC supplies and bias voltages as AC grounds:\n\n* \\(V_{DD} \\rightarrow\\) AC ground  \n* \\(v_{b1}, v_{b2} \\rightarrow\\) AC ground  \n* Each transistor is modeled by its output resistance \\(r_{oi}\\) and transconductance \\(g_{mi}\\).\n\n---\n\n### 1.  Identify which transistor is “active”\n\nThe stack is connected between \\(V_{DD}\\) (top) and the output node (bottom, labeled \\(R_{out}\\)).\n\n* **Transistor \\(M_2\\)** (upper) has its **source** at \\(V_{DD}\\).  \n  Because both its gate and source sit at AC ground, \\(V_{gs2}=0\\).  \n  Hence \\(M_2\\) contributes **only its output resistance** \\(r_{o2}\\) between node \\(X\\) and ground.\n\n* **Transistor \\(M_1\\)** (lower) has its **source at the intermediate node \\(X\\)**.  \n  Its gate is at AC ground, so  \n  \\[\n  V_{gs1}=-V_X .\n  \\]\n  Thus \\(M_1\\) is the **cascode device**; its \\(g_{m1}\\) is fully active.\n\nSo the small‑signal model is:\n\n* From node \\(X\\) to ground: resistor \\(r_{o2}\\).\n* Between node \\(X\\) and the output node \\(O\\): transistor \\(M_1\\) with resistance \\(r_{o1}\\) and a current source \\(g_{m1}V_X\\).\n\n---\n\n### 2.  Apply a test voltage\n\nApply a test voltage \\(V_t\\) at the output node \\(O\\) (with \\(V_{DD}=0\\)).  \nWe need the current \\(I_t\\) drawn from the source; then\n\\[\nR_{out}=\\frac{V_t}{I_t}.\n\\]\n\nLet \\(V_X\\) be the small‑signal voltage at node \\(X\\).\n\n**KCL at node \\(X\\):**\n\nCurrent leaving \\(X\\) through \\(M_2\\):\n\\[\n\\frac{V_X}{r_{o2}}\n\\]\n\nCurrent leaving \\(X\\) through \\(M_1\\) (resistor + current source):\n\\[\n\\frac{V_X-V_t}{r_{o1}}+g_{m1}V_X\n\\]\n\nSumming to zero:\n\\[\n\\frac{V_X}{r_{o2}}+\\frac{V_X-V_t}{r_{o1}}+g_{m1}V_X=0 .\n\\]\n\nSolve for \\(V_X\\):\n\\[\nV_X\\!\\left(\\frac{1}{r_{o2}}+\\frac{1}{r_{o1}}+g_{m1}\\right)=\\frac{V_t}{r_{o1}}\n\\]\n\\[\n\\Rightarrow\\;\nV_X = \\frac{V_t\\,r_{o2}}{r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}} .\n\\]\n\n---\n\n### 3.  Find the test current \\(I_t\\)\n\nThe current flowing up from the output node into the stack is:\n\\[\nI_t = \\frac{V_t-V_X}{r_{o1}}+g_{m1}V_X .\n\\]\n\nSubstitute \\(V_X\\) above and simplify (or use the well‑known **source‑degeneration** result: a transistor with source resistance \\(R_s=r_{o2}\\) gives \\(R_{out}=r_{o1}(1+g_{m1}r_{o2})+r_{o2}\\)):\n\n\\[\nI_t = \\frac{V_t}{r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}} .\n\\]\n\n---\n\n### 4.  Output resistance\n\n\\[\n\\boxed{R_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nSince for a typical device \\(g_{m1}r_{o1}r_{o2} \\gg r_{o1},r_{o2}\\), the approximate (dominant) expression is:\n\n\\[\n\\boxed{R_{out}\\approx g_{m1}\\,r_{o1}\\,r_{o2}}\n\\]\n\nIf both transistors have the same parameters (\\(r_o\\), \\(g_m\\)):\n\n\\[\n\\boxed{R_{out}\\approx g_m r_o^{\\,2}}\n\\]\n\n---\n\n**Summary:**  \nThe upper transistor \\(M_2\\) acts as a simple resistance \\(r_{o2}\\) because its \\(V_{gs}=0\\). The lower transistor \\(M_1\\) acts as a cascode with source degeneration \\(r_{o2}\\), boosting the resistance by the factor \\((1+g_{m1}r_{o2})\\). The exact result is \\(R_{out}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\), and usually \\(R_{out}\\approx g_{m1}r_{o1}r_{o2}\\).",
        "format": "markdown",
        "sha256": "416cd566d2282dc31eb9dd133ba0cca03cf9f332bd43557375f1af5db1768e64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies M1 as the cascode device and gives the correct output-resistance expression and approximation. Omitting body effect is allowed by the golden solution.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 32309,
        "total_tokens": 34360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2051,
        "output_tokens": 32309,
        "total_tokens": 34360,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To keep the upper transistor **M₂ saturated**, its drain–source (or source–drain) voltage must be at least its **overdrive voltage**:\n\n\\[\nV_{SD2} \\;\\ge\\; V_{SG2}-|V_{th2}| \\;\\equiv\\; V_{OV2}\n\\quad\\text{(PMOS case, source = }V_{DD}\\text{)}\n\\]\n\nor\n\n\\[\nV_{DS2} \\;\\ge\\; V_{GS2}-V_{th2} \\;\\equiv\\; V_{OV2}\n\\quad\\text{(NMOS case, drain = }V_{DD}\\text{).}\n\\]\n\nBecause M₂ is stacked above M₁, the intermediate node **X** is shared. The voltage at X is therefore the critical “bottleneck” that determines whether M₂ has enough headroom.\n\n### How the biases are chosen\n\n1. **Fix Vₓ by biasing M₁**  \n   We first choose **Vb₁** so that M₁ is saturated with the **minimum possible** Vₒᵥ, i.e.  \n   \\[\n   V_{SD1} = V_{OV1} \\quad (\\text{or } V_{DS1}=V_{OV1}).\n   \\]\n   This fixes the node voltage:\n   \\[\n   V_X = V_{out}+V_{OV1}\n   \\quad\\text{or}\\quad\n   V_X = V_{DD}-V_{OV2}\n   \\]\n   depending on whether the stack sources or sinks current.\n\n2. **Set Vb₂ to establish M₂’s overdrive while preserving V_SD₂ ≥ V_OV₂**  \n   Once Vₓ is positioned, **Vb₂** is chosen so that M₂ carries the desired current with its own overdrive:\n   \\[\n   V_{SG2} = |V_{th2}|+V_{OV2}\n   \\;\\;\\Rightarrow\\;\\;\n   V_{b2} = V_{DD} - \\bigl(|V_{th2}|+V_{OV2}\\bigr)\n   \\]\n   (for the PMOS case where M₂’s source is at VDD).\n\n   Because Vₓ is already kept at **V_DD – V_OV₂** (by step 1), M₂ sees exactly the minimum required saturation voltage:\n   \\[\n   V_{SD2} = V_{DD}-V_X = V_{OV2}.\n   \\]\n\n### In short\nWe **co-design Vb₁ and Vb₂**:\n* **Vb₁** forces M₁ to sit at the edge of saturation (V_SD₁ = V_OV₁), which keeps Vₓ as low/high as needed.\n* **Vb₂** is then set to give M₂ the correct V_SG (or V_GS) for the target current, ensuring **V_SD₂ = V_OV₂ ≥ V_OV₂**, so M₂ is saturated (typically at the edge of saturation to minimize headroom).\n\nIf Vb₂ were too high (making V_SG₂ too small) or if Vₓ were too high because M₁ had too large a V_SD, then **V_SD₂ would drop below V_OV₂** and M₂ would enter the triode region.",
        "format": "markdown",
        "sha256": "76cfab98406a0018e303ed4a12efc126da6d168809643fb88ebf5c6570af9212"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct PMOS saturation condition and qualitatively recognizes that biasing M1 with Vb1 positions X. However, it omits the key relation between X and Vb1 and the resulting Vb1 condition, and its headroom prescriptions overstate Vb2's role.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 22171,
        "total_tokens": 24282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 22171,
        "total_tokens": 24282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To keep the upper transistor **M₂** in saturation we must satisfy its saturation condition for the given stack (PMOS devices with source at **VDD**):\n\n\\[\nV_{SD2} \\ge V_{ov2} \\quad\\text{where}\\quad V_{ov2}=V_{SG2}-|V_{TH2}|\n\\]\n\nBecause M₂’s source is at **VDD** and its drain is node **X**:\n\n\\[\nV_{SD2}=V_{DD}-V_X\n\\]\n\nSo the requirement becomes:\n\n\\[\n\\boxed{V_X \\le V_{DD} - V_{ov2}}\n\\]\n\n---\n\n### How we enforce this in design\n\n1. **Choose Vb₂ to set the overdrive of M₂**  \n   We bias M₂ so that it carries the desired current \\(I\\) with a specific overdrive:\n   \\[\n   V_{b2} = V_{DD} - V_{SG2} = V_{DD} - \\bigl(|V_{TH2}|+V_{ov2}\\bigr)\n   \\]\n   This fixes \\(V_{ov2}\\); it does **not** by itself guarantee saturation, because \\(V_X\\) is set by the lower transistor.\n\n2. **Control V_X through Vb₁ (and M₁)**  \n   Node **X** is the source of M₁ (or drain of M₁, depending on exact labeling), so for M₁ to be saturated:\n   \\[\n   V_{SD1} \\ge V_{ov1} \\;\\Rightarrow\\; V_X \\ge V_{out}+V_{ov1}\n   \\]\n   Thus we pick **Vb₁** so that M₁ operates at its minimum required \\(V_{SD1}=V_{ov1}\\), giving:\n   \\[\n   V_X = V_{out}+V_{ov1}\n   \\]\n\n3. **Combine the two to “ensure” M₂ stays saturated**  \n   Substituting \\(V_X\\) into M₂’s condition:\n   \\[\n   V_{out}+V_{ov1} \\le V_X \\le V_{DD}-V_{ov2}\n   \\]\n   This is possible only if the supply/headroom satisfies:\n   \\[\n   V_{DD}-V_{out} \\ge V_{ov1}+V_{ov2}\n   \\]\n   In the **minimum-voltage (wide-swing) design**, we deliberately set:\n   \\[\n   V_{SD2}=V_{ov2} \\;\\Rightarrow\\; V_X = V_{DD}-V_{ov2}\n   \\]\n   and simultaneously:\n   \\[\n   V_{SD1}=V_{ov1} \\;\\Rightarrow\\; V_X = V_{out}+V_{ov1}\n   \\]\n\n### Bottom line\nWe **do not** let \\(V_X\\) float arbitrarily close to \\(V_{DD}\\). By choosing **Vb₂** to establish \\(V_{ov2}\\) and choosing **Vb₁** (and the transistor sizing/current) so that \\(V_X = V_{DD}-V_{ov2}\\), we force \\(V_{SD2}\\) to be exactly (or slightly larger than) the required overdrive, keeping M₂ firmly in saturation. If \\(V_X\\) were too high, \\(V_{SD2}\\) would drop below \\(V_{ov2}\\) and M₂ would enter the triode region.",
        "format": "markdown",
        "sha256": "31a92a753ee34a7b692f234a06f0992929dd9b06344c4419253bd5c62a7d8f90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies both devices as PMOS and gives M2’s saturation condition, and it recognizes that Vb1 controls VX. However, it omits the relation VX = Vb1 + |VGS1| (or an equivalent condition on Vb1), relying instead on an M1 headroom condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 18348,
        "total_tokens": 20459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 18348,
        "total_tokens": 20459,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the figure both transistors are **PMOS** devices (the arrow is on the source terminal; for M₂ the source is at **VDD**, and for M₁ the source is the intermediate node **X**).  \nTo keep M₂ in saturation we must satisfy the PMOS saturation condition:\n\n\\[\nV_{SD2} \\;\\ge\\; V_{SG2} - |V_{th2}|\n\\]\n\n---\n\n### 1. Write the voltages in terms of the node voltages and biases\n\n* **Source–drain voltage of M₂:** \\(V_{SD2} = V_{DD} - V_X\\)\n* **Source–gate voltage of M₂:** \\(V_{SG2} = V_{DD} - V_{b2}\\)\n\nSubstituting these into the saturation inequality gives:\n\n\\[\nV_{DD} - V_X \\;\\ge\\; (V_{DD} - V_{b2}) - |V_{th2}|\n\\quad\\Longrightarrow\\quad\n\\boxed{V_X \\;\\le\\; V_{b2} + |V_{th2}|}\n\\]\n\nOr, rearranged to show the required headroom for M₂:\n\n\\[\n\\boxed{V_{DD} - V_X \\;\\ge\\; V_{OV2}}\n\\qquad\\text{where}\\qquad\nV_{OV2} = V_{SG2} - |V_{th2}|\n\\]\n\n---\n\n### 2. What this means physically\n\nM₂ is “at risk” of entering triode when **V_X gets too close to VDD** (i.e. when \\(V_{SD2}\\) collapses).  \nWe therefore have to choose the gate bias **V\\_{b2}** (and size M₂) so that its overdrive voltage \\(V_{OV2}\\) is positive, and we must use the lower transistor **M₁** (via its bias **V\\_{b1}**) to hold node X at a value that leaves enough \\(V_{SD2}\\).\n\nIn practice the design is done as follows (the classic “wide-swing” cascode approach):\n\n| Design choice | Result |\n|---|---|\n| Pick a current \\(I\\) and size M₂ | Determines \\(V_{SG2} = |V_{th2}| + V_{OV2}\\) |\n| Set \\(V_{b2} = V_{DD} - V_{SG2}\\) | Fixes M₂’s current |\n| Use a reference branch (or diode connection) for M₁ | Fixes \\(V_{SG1} = |V_{th1}| + V_{OV1}\\) |\n| Choose \\(V_{b1}\\) so that \\(V_X = V_{b1} + V_{SG1}\\) | Holds node X at the desired potential |\n\nTo **minimize** the total voltage needed across the stack (\\(V_{DD} - V_{out}\\)) while keeping M₂ saturated, we design for the **edge of saturation**:\n\n\\[\nV_{SD2} = V_{OV2}\n\\quad\\Longrightarrow\\quad\nV_X = V_{DD} - V_{OV2}\n\\]\n\nThen:\n\n\\[\nV_{b2} = V_{DD} - (|V_{th2}| + V_{OV2})\n\\]\n\nAs long as \\(V_X \\le V_{b2} + |V_{th2}|\\) (i.e. \\(V_{DD}-V_X \\ge V_{OV2}\\)), M₂ is safely in saturation; with the choice above it is at the edge of saturation, which gives the smallest possible headroom.\n\n---\n\n### 3. Short answer\n\n**We ensure M₂ is saturated by choosing \\(V_{b2}\\) so that**\n\n\\[\nV_{SD2} = V_{DD} - V_X \\;\\ge\\; V_{SG2} - |V_{th2}|\n\\]\n\n**In design terms:** set \\(V_{b2} = V_{DD} - (|V_{th2}| + V_{OV2})\\) and use \\(V_{b1}\\) (through M₁) to hold node X at \\(V_X \\le V_{DD} - V_{OV2}\\). This guarantees \\(V_X \\le V_{b2} + |V_{th2}|\\), so M₂ operates in saturation (typically right at the edge, \\(V_{SD2}=V_{OV2}\\), to minimize required headroom).",
        "format": "markdown",
        "sha256": "87494049451f3d5df1c127720341ba52d5784c513c4483a9d3d1ff0dbf3ebf28"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS and gives M2’s saturation condition. It also relates the intermediate node to M1’s bias, V_X = V_b1 + V_SG1, which supplies the required condition on V_b1 when combined with the saturation inequality. The extra design discussion does not negate that essential reasoning.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 26896,
        "total_tokens": 29007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2111,
        "output_tokens": 26896,
        "total_tokens": 29007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **telescopic cascode common‑source amplifier** (or, viewed as a branch, a high‑output‑resistance NMOS cascode current stack).  \nHere is a systematic analysis of its DC and small‑signal behavior.\n\n---\n\n## 1. Component & Topology Identification\n\n| Symbol | Role |\n|--------|------|\n| **M₁** | Input NMOS transistor (common‑source). Source grounded; gate driven by $v_\\mathrm{in}$. |\n| **M₂** | Cascode NMOS transistor (common‑gate). Gate biased by DC voltage $v_{b1}$; source at node **x**; drain at $v_\\mathrm{out}$. |\n| **I₁** | Ideal DC current source (in practice a PMOS current‑mirror load) connected between $V_{DD}$ and $v_\\mathrm{out}$. Arrow down $\\Rightarrow$ it **sources** $I_1$ into node $v_\\mathrm{out}$. |\n| **Node x** | Intermediate drain/source node between M₁ and M₂. |\n\nBecause $M_1$ and $M_2$ are stacked in series and both carry the same DC current, this is a **cascode (stacked) transistor pair**. The load is the ideal current source $I_1$, which presents **infinite impedance** for AC signals.\n\n---\n\n## 2. DC Operating Point\n\nThe series connection forces:\n$$I_{D1} = I_{D2} = I_1$$\n\n### Bias voltages\n* **M₁:** $V_{GS1} = V_\\mathrm{in,DC}$ is set by the square‑law (or desired $I_1$):\n  $$I_1 = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{GS1}-V_{th1})^2(1+\\lambda_1 V_{DS1})$$\n* **Node x:** $V_X = V_{DS1}$.\n* **M₂:** Its gate is fixed at $V_{b1}$, so\n  $$V_{GS2} = V_{b1} - V_X$$\n  and $I_1$ again fixes $V_{GS2}$ via its own $W/L$.\n* **Output:** $V_\\mathrm{out} = V_X + V_{DS2}$. Because $I_1$ is an ideal current source, $V_\\mathrm{out}$ is not pinned by $I_1$ alone; in a real circuit it is set by the $V_{SD}$ of the PMOS load that implements $I_1$.\n\n### Saturation conditions\nTo keep both devices in saturation (required for high gain):\n$$V_{DS1} \\ge V_{GS1}-V_{th1} \\quad\\Rightarrow\\quad V_X \\ge V_\\mathrm{in,DC}-V_{th1}$$\n$$V_{DS2} \\ge V_{GS2}-V_{th2} \\quad\\Rightarrow\\quad V_\\mathrm{out}-V_X \\ge V_{b1}-V_X-V_{th2}$$\n\nThe DC bias $V_{b1}$ is chosen precisely so that $V_X$ sits at a value that satisfies both constraints, usually with a small “headroom” margin ($V_{DS} \\approx V_{GS}-V_{th} + \\Delta$).\n\n---\n\n## 3. Small‑Signal Analysis\n\nSet AC ground: $V_{DD}\\to 0$, $v_{b1}\\to 0$, $I_1 \\to$ open circuit.\n\n### Transistor small‑signal models\n* **M₁:** $g_{m1}v_\\mathrm{in}$ (D→S), output resistance $r_{o1}$.\n* **M₂:** $g_{m2}v_{gs2}$ (D→S), $r_{o2}$. Because $v_{b1}$ is AC ground:\n  $$v_{gs2} = 0 - v_X = -v_X$$\n  *(If $M_2$’s body is tied to substrate ground, include body effect: $g_{m2}\\to g_{m2}+g_{mb2}$ in the $R_{out}$ expressions below.)*\n\n### Key result: Node‑x voltage\nApplying KCL at node **x** (and using the fact that $v_\\mathrm{out}$ is floating for AC, so current through $M_2$ to $v_\\mathrm{out}$ is zero at DC bias point? No—more precisely, solving the two‑node network):\n\nFrom KCL at $v_\\mathrm{out}$ (no external AC load):\n$$\\frac{v_\\mathrm{out}-v_X}{r_{o2}} - g_{m2}v_X = 0 \\;\\Rightarrow\\; v_\\mathrm{out} = (1+g_{m2}r_{o2})v_X$$\n\nFrom KCL at node **x**:\n$$\\frac{v_X}{r_{o1}} + g_{m1}v_\\mathrm{in} = 0 \\;\\Rightarrow\\; v_X = -g_{m1}r_{o1}\\,v_\\mathrm{in}$$\n\nHence:\n$$\\boxed{v_X = -g_{m1}r_{o1}\\,v_\\mathrm{in}}$$\n\nThe cascode transistor “buffers” node **x** so that its AC voltage is amplified by $(1+g_{m2}r_{o2})$ before reaching $v_\\mathrm{out}$.\n\n---\n\n## 4. Output Resistance ($R_\\mathrm{out}$)\n\nTo find $R_\\mathrm{out}$, turn off $v_\\mathrm{in}$ (so $g_{m1}v_\\mathrm{in}=0$) and apply a test voltage $v_t$ at $v_\\mathrm{out}$.\n\nThe classic cascode result is:\n$$\\boxed{R_\\mathrm{out} = r_{o1} + r_{o2} + g_{m2}r_{o1}r_{o2} \\approx g_{m2}r_{o1}r_{o2}}$$\n\nIf body effect is present ($g_{mb2}\\neq 0$):\n$$R_\\mathrm{out} \\approx (g_{m2}+g_{mb2})r_{o1}r_{o2}$$\n\nThis is **much larger** than a simple common‑source stage ($R_\\mathrm{out} \\approx r_{o1}$).\n\n---\n\n## 5. Voltage Gain\n\nThe effective transconductance of the stack is $G_m \\approx g_{m1}$ (slightly less due to finite $r_{o2}$, but to first order $G_m \\approx g_{m1}$).\n\nBecause $I_1$ is open for AC, the load is $R_\\mathrm{out}$ itself:\n$$\\boxed{A_v = \\frac{v_\\mathrm{out}}{v_\\mathrm{in}} = -G_m R_\\mathrm{out} \\approx -g_{m1}\\,g_{m2}r_{o1}r_{o2}}$$\n\nMore precisely:\n$$A_v = -g_{m1}r_{o1}\\,(1+g_{m2}r_{o2}) \\approx -g_{m1}g_{m2}r_{o1}r_{o2}$$\n\n### Comparison with simple CS\nA single transistor with current‑source load has $|A_v| = g_{m1}r_{o1}$.  \nThe cascode stack improves gain by a factor $\\approx g_{m2}r_{o2}$ (typically $20\\!-\\!40\\times$).\n\n---\n\n## 6. Physical Interpretation\n\n| Feature | What happens |\n|---------|--------------|\n| **Cascode action (M₂)** | $M_2$ shields $M_1$ from output voltage variations. A change $\\Delta v_\\mathrm{out}$ changes $V_{DS2}$ but only weakly changes $V_{DS1}$ because $M_2$’s high $g_{m2}$ keeps node **x** pinned. |\n| **Node x (label “x”)** | Its AC voltage is $v_X = -g_{m1}r_{o1}v_\\mathrm{in}$; it sits at a DC level $V_X \\approx V_{b1} - V_{GS2}$. |\n| **$v_{b1}$** | Sets $V_{GS2}$ to keep $M_1$ saturated (i.e., $V_X \\ge V_\\mathrm{in,DC}-V_{th1}$) and to give $M_2$ enough $V_{DS2}$ headroom. |\n| **Output resistance boost** | $M_2$ acts like a “current buffer”: it passes the current from $M_1$ to $v_\\mathrm{out}$ but its high $g_{m2}$ makes $v_\\mathrm{out}$ “see” $r_{o1}$ multiplied by $g_{m2}r_{o2}$. |\n\n---\n\n## 7. Summary Equations\n\n| Quantity | Expression |\n|----------|------------|\n| DC branch current | $I_{D1}=I_{D2}=I_1$ |\n| Node‑x AC voltage | $v_X = -g_{m1}r_{o1}v_\\mathrm{in}$ |\n| Output resistance | $R_\\mathrm{out} \\approx g_{m2}r_{o1}r_{o2}$ |\n| Voltage gain | $A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}$ |\n| $v_{b1}$ purpose | Bias $M_2$ so $M_1$ stays saturated; $V_{b1} \\approx V_X + V_{GS2}$ |\n\nIn short: **$M_1$ converts $v_\\mathrm{in}$ to a current; $M_2$ passes that current to $v_\\mathrm{out}$ while multiplying the impedance seen at the output; $I_1$ provides the DC bias and defines the operating current.** The result is a high‑gain, high‑output‑resistance amplifying stage.",
        "format": "markdown",
        "sha256": "225e98d9ebc8c9e8bdbc96ffe024d83ff180c0c3b84517f358ebfddeaec66d20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-source NMOS and M₂ as the common-gate NMOS cascode, and gives the ideal-current-source-load gain equivalent to the golden expression. The body-effect omission is allowed.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24728,
        "total_tokens": 26885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24728,
        "total_tokens": 26885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **telescopic cascode common‑source (CS) amplifier** (also called a **cascode gain stage**).  Its key components are:\n\n| Component | Function |\n|-----------|----------|\n| **$M_1$** | NMOS common‑source transistor; gate is driven by $v_\\text{in}$, source is grounded. |\n| **$M_2$** | NMOS cascode (common‑gate) transistor; gate is biased at DC voltage $v_{b1}$; source is node **X** (drain of $M_1$); drain is the output node $v_\\text{out}$. |\n| **$I_1$** | Ideal DC current source connected between $V_{DD}$ and $v_\\text{out}$. It forces the DC drain current of both transistors to be $I_1$. |\n| **Node X** | Internal (cascode) node: $v_X = v_{DS1}$. |\n| **$v_\\text{out}$** | Output taken at the drain of $M_2$. |\n\nBelow is a systematic analysis: DC operating point, small‑signal model, voltage gain, output resistance, and design insight.\n\n---\n\n## 1. DC Operating Point\n\nBecause $I_1$ is in series with the stack $M_2\\!-\\!M_1$, the DC currents are identical:\n\n$$I_{D1} = I_{D2} = I_1$$\n\nThe DC voltages are set by transistor parameters $(W/L, V_{th}, \\mu_n C_{ox})$ and by the choice of $v_{in,DC}$ and $v_{b1}$:\n\n* **$M_1$** (must be saturated):\n  $$V_{GS1} = V_{in,DC} = V_{th1} + \\sqrt{\\frac{2I_1}{\\mu_n C_{ox}(W/L)_1}}$$\n  $$V_{DS1} = V_X \\ge V_{GS1}-V_{th1}$$\n\n* **$M_2$** (must be saturated):\n  $$V_{GS2} = v_{b1} - V_X$$\n  $$V_{DS2} = v_{out} - V_X \\ge V_{GS2}-V_{th2}$$\n\n* **$v_{b1}$** is chosen to place $V_X$ at a comfortable level (typically one $V_{GS}$ above ground) so that $M_1$ has enough $V_{DS}$ to stay saturated, while leaving headroom for $M_2$.\n\n* **$v_{out}$** is not “pinned” by $I_1$ (because $I_1$ is an ideal current source with infinite small‑signal resistance); it is determined by the $I$–$V$ characteristic of $M_2$:\n  $$v_{out} = V_X + V_{DS2}(I_1, V_{GS2})$$\n\n---\n\n## 2. Small‑Signal (AC) Model\n\nFor AC analysis:\n* $V_{DD}$ and $v_{b1}$ become **AC grounds**.\n* The ideal current source $I_1$ becomes an **open circuit** ($r_{o,I_1}=\\infty$).\n* $M_1$ is modeled by $g_{m1}v_{in}$ in parallel with $r_{o1}$.\n* $M_2$ is modeled by $g_{m2}v_{gs2}$ in parallel with $r_{o2}$; because its gate is grounded AC‑wise,\n  $$v_{gs2} = 0 - v_X = -v_X$$\n\nThe small‑signal equivalent is therefore a **cascode stack** feeding an open load.\n\n---\n\n## 3. Output Resistance $R_{out}$\n\nLooking into $v_{out}$ with $v_{in}=0$ (so $g_{m1}v_{in}=0$ and $M_1$ reduces to $r_{o1}$ to ground):\n\nApplying a test voltage $v_t$ at $v_{out}$ and solving KCL at nodes $v_{out}$ and $X$ yields the well‑known cascode result:\n\n$$\\boxed{R_{out} = r_{o1}+r_{o2}+g_{m2}r_{o2}r_{o1} \\approx g_{m2}r_{o2}r_{o1}}$$\n\nBecause $g_{m2}r_{o2} \\gg 1$, the output resistance is boosted by roughly a factor of $g_{m2}r_{o2}$ compared with $r_{o1}$.\n\nSince $I_1$ is ideal, the total resistance at $v_{out}$ is just $R_{out}$.\n\n---\n\n## 4. Voltage Gain $A_v = v_{out}/v_{in}$\n\nBecause $v_{out}$ is **floating for AC** (no path through $I_1$), the small‑signal current through $M_2$ must be zero:\n\n$$i_{d2,ac} = 0$$\n\nThis forces node X to swing so that $M_1$’s controlled source is exactly cancelled by its own $r_{o1}$:\n\n$$v_X = -g_{m1}r_{o1}\\,v_{in}$$\n\nNow apply $i_{d2,ac}=0$ to the $M_2$ branch:\n\n$$g_{m2}v_{gs2}+\\frac{v_{out}-v_X}{r_{o2}}=0\n\\;\\;\\Rightarrow\\;\\;\nv_{out} = (1+g_{m2}r_{o2})v_X$$\n\nSubstituting $v_X$:\n\n$$\\boxed{A_v = -(1+g_{m2}r_{o2})\\,g_{m1}r_{o1} \\approx -g_{m1}g_{m2}r_{o1}r_{o2} = -g_{m1}R_{out}}$$\n\nThe gain is therefore **very high**: it scales as $\\sim (g_m r_o)^2$, i.e. second‑order in the intrinsic transistor gain.\n\nA more precise expression using $R_{out}$ is:\n\n$$A_v = -G_m R_{out},\\qquad G_m \\approx g_{m1}$$\n\nwhere $G_m$ is the short‑circuit transconductance of the stage.\n\n---\n\n## 5. Key Physical Insights\n\n| Feature | Explanation |\n|---------|-------------|\n| **Cascode action ($M_2$)** | $M_2$ operates in common‑gate mode. It passes the current of $M_1$ while presenting a high impedance at $v_{out}$. |\n| **Shielding / Miller reduction** | The large AC swing at $v_{out}$ is “blocked” from reaching node X by $M_2$. Thus $v_{ds1}$ is small (only $\\approx v_{in}$ scaled by $g_{m1}r_{o1}$), greatly reducing the Miller multiplication of $C_{gd1}$ and improving bandwidth compared with a simple CS stage. |\n| **High $R_{out}$** | The resistance is boosted because $M_2$’s $g_{m2}$ creates positive feedback that “resists” current changes at $v_{out}$. |\n| **Ideal load $I_1$** | Because $I_1$ is an open for AC, the full $R_{out}$ is used; there is no loading loss. In a real design $I_1$ might be a PMOS current mirror with finite $r_o$, and the total load would be $R_{out} \\parallel r_{o,\\text{PMOS}}$. |\n| **Bias role of $v_{b1}$** | $v_{b1}$ sets $V_{GS2}$ and therefore $V_X$. It must be chosen so that both $M_1$ and $M_2$ stay saturated with adequate headroom. |\n| **Body effect** | If the bodies of $M_1,M_2$ are grounded (standard in bulk CMOS), $M_2$ suffers body effect because $V_X > 0$; this raises $V_{th2}$ and slightly lowers $g_{m2}$. |\n\n---\n\n## 6. Design Equations (Summary)\n\n| Quantity | Expression / Condition |\n|----------|------------------------|\n| DC current | $I_{D1}=I_{D2}=I_1$ |\n| Saturation $M_1$ | $V_X \\ge V_{GS1}-V_{th1}$ |\n| Saturation $M_2$ | $v_{out}-V_X \\ge V_{GS2}-V_{th2}$ |\n| Output resistance | $R_{out} \\approx g_{m2}r_{o2}r_{o1}$ |\n| Small‑signal gain | $A_v \\approx -g_{m1}R_{out} \\approx -g_{m1}g_{m2}r_{o1}r_{o2}$ |\n| Node X AC | $v_X \\approx -g_{m1}r_{o1}v_{in}$ |\n\n---\n\n## 7. Conclusion\n\nThe circuit is a **telescopic cascode common‑source amplifier** optimized for high DC gain:\n* $M_1$ provides the input transconductance.\n* $M_2$ (common‑gate) multiplies the output resistance by $\\approx g_{m2}r_{o2}$.\n* $I_1$ provides an ideal (infinite‑resistance) load so that the full boosted $R_{out}$ is exploited.\n* The result is a gain of order $A_v \\sim -(g_m r_o)^2$, which is among the highest achievable with a single stack without feedback.\n\nTypical applications are high‑gain analog stages (e.g., in op‑amp input stages, comparators, or precision amplifiers), where the cascode structure trades some voltage headroom (because of the stacked $M_2$) for a dramatic increase in intrinsic gain and improved frequency response due to reduced Miller effect at $M_1$.",
        "format": "markdown",
        "sha256": "77dcbd0f8bcf359d1593132914547eb338254a44874bd29eed2ab0c8ee18e322"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain −gm1gm2ro1ro2. Minor imprecision in describing the node-X swing does not affect the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 36833,
        "total_tokens": 38990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 36833,
        "total_tokens": 38990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23254,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This schematic is a **single‑ended telescopic cascode common‑source amplifier** (often called a **cascode gain stage**).  \nBelow is a systematic analysis: identification of the devices, DC biasing, small‑signal model, voltage gain, output resistance, and practical remarks.\n\n---\n\n## 1. Component & Topology Identification\n\n| Symbol | Role / Terminal connections |\n|--------|------------------------------|\n| **V<sub>DD</sub>** | Positive supply (AC ground for small signals). |\n| **I<sub>1</sub>** | Ideal DC current source; forces the bias current of the stack. For AC it is an **open circuit** (infinite impedance). |\n| **M<sub>1</sub>** | **NMOS** input transistor. Gate = **v<sub>in</sub>**; Source = GND; Drain = node **X**. |\n| **M<sub>2</sub>** | **NMOS** cascode (common‑gate) transistor. Gate = DC bias **v<sub>b1</sub>** (AC ground); Source = node **X**; Drain = **v<sub>out</sub>**. |\n| **v<sub>out</sub>** | Output node (drain of the cascode device). |\n| **Node X** | Internal node: drain of M<sub>1</sub> / source of M<sub>2</sub>. |\n\nThe arrow on each MOSFET marks its **source** terminal:\n* M<sub>1</sub> source is grounded.\n* M<sub>2</sub> source is node X (lower potential than v<sub>out</sub>), so M<sub>2</sub> is also NMOS.\n\n**Function:** M<sub>1</sub> converts v<sub>in</sub> to a current (transconductance g<sub>m1</sub>). M<sub>2</sub> “shields” that current source from the low‑impedance drain of M<sub>1</sub>, boosting the output resistance by roughly a factor g<sub>m2</sub>r<sub>o2</sub>. The result is a very high small‑signal gain.\n\n---\n\n## 2. DC Operating Point (Assume Saturation)\n\nLet  \nk<sub>n</sub> = μ<sub>n</sub>C<sub>ox</sub>(W/L),  r<sub>o</sub> = 1/(λI<sub>D</sub>),  V<sub>th</sub> = threshold (with body effect for M<sub>2</sub>).\n\nBecause I<sub>1</sub> is in series:\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\n### M<sub>1</sub> (source at ground, so V<sub>SB</sub>=0)\n\n\\[\nI_1 = \\frac{1}{2}k_{n1}\\bigl(V_{GS1}-V_{th1}\\bigr)^2\n      = \\frac{1}{2}k_{n1}\\bigl(V_{in,DC}-V_{th1}\\bigr)^2\n\\]\n\nThus the required DC input is\n\n\\[\nV_{in,DC} = V_{th1}+\\sqrt{\\frac{2I_1}{k_{n1}}}\n\\]\n\nand\n\n\\[\nV_X = V_{DS1} \\ge V_{GS1}-V_{th1} \\equiv V_{OV1}.\n\\]\n\n### M<sub>2</sub> (source at X, body at GND → body effect)\n\n\\[\nV_{SB2}=V_X \\quad\\Rightarrow\\quad\nV_{th2}=V_{th0}+\\gamma\\!\\left(\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\\right)\n\\]\n\n\\[\nI_1 = \\frac{1}{2}k_{n2}\\bigl(V_{b1}-V_X-V_{th2}\\bigr)^2\n\\]\n\nso the bias **v<sub>b1</sub>** is chosen to set V<sub>X</sub> at a convenient value (typically a bit above V<sub>OV1</sub> to keep M<sub>1</sub> saturated with margin).\n\nThe drain of M<sub>2</sub> sits at\n\n\\[\nV_{out,DC} = V_X + V_{DS2} \\ge V_X + \\bigl(V_{b1}-V_X-V_{th2}\\bigr) = V_{b1}-V_{th2}.\n\\]\n\nIn practice V<sub>out,DC</sub> is set by the compliance of I<sub>1</sub>; because I<sub>1</sub> is ideal, V<sub>out</sub> is free to move with the signal as long as both devices stay saturated.\n\n---\n\n## 3. Small‑Signal Equivalent Circuit\n\n* V<sub>DD</sub> and DC biases (v<sub>b1</sub>, V<sub>in,DC</sub>) → **AC ground**.\n* I<sub>1</sub> → **open** (no small‑signal current can enter/leave v<sub>out</sub> from above).\n* Body of M<sub>1</sub> is ground → **no body effect** (v<sub>bs1</sub>=0).\n* Body of M<sub>2</sub> is ground, but its source is X → **body effect active**:\n  \\[\n  g_{mb2} = \\frac{\\partial I_{D2}}{\\partial V_{SB2}}\n          = g_{m2}\\frac{\\gamma}{2\\sqrt{2\\phi_F+V_{SB2}}} \\equiv \\chi\\, g_{m2}\n  \\]\n\nThe small‑signal model is:\n\n```\nv_in ---[g_m1 v_in]---+--- node X ---[g_m2(-v_x)+g_mb2(v_x)]---+--- v_out\n                      |                                    |\n                     r_o1                                 r_o2\n                      |                                    |\n                     GND                                  |\n                      <-----------------------------------+\n```\n\nBecause I<sub>1</sub> is open, the **series current through M<sub>2</sub> and M<sub>1</sub> is zero** for AC:\n\\[\ni_{d1}^{\\;(ss)} = i_{d2}^{\\;(ss)} = 0.\n\\]\n\n---\n\n## 4. Voltage Gain \\(A_v = v_{out}/v_{in}\\)\n\n### Step A – Node X (current through M<sub>1</sub> = 0)\n\n\\[\ng_{m1}v_{in} + \\frac{v_x}{r_{o1}} = 0\n\\quad\\Longrightarrow\\quad\n\\boxed{v_x = -g_{m1}r_{o1}\\,v_{in}}\n\\]\n\n### Step B – Node v<sub>out</sub> (current through M<sub>2</sub> = 0)\n\nFor M<sub>2</sub>:\n* \\(v_{gs2} = v_{g2}-v_{s2} = 0 - v_x = -v_x\\)\n* \\(v_{bs2} = v_{s2} - v_b = v_x\\)\n\n\\[\n\\frac{v_{out}-v_x}{r_{o2}} + g_{m2}v_{gs2} + g_{mb2}v_{bs2} = 0\n\\]\n\n\\[\n\\frac{v_{out}-v_x}{r_{o2}} - (g_{m2}-g_{mb2})v_x = 0\n\\]\n\n\\[\n\\boxed{v_{out} = \\bigl[1+(g_{m2}-g_{mb2})r_{o2}\\bigr]v_x}\n\\]\n\n### Step C – Combine\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}}\n     = -g_{m1}r_{o1}\\Bigl[1+(g_{m2}-g_{mb2})r_{o2}\\Bigr]\n\\]\n\n**Approximations** (since \\(g_{m}r_o \\gg 1\\)):\n\n\\[\n\\boxed{A_v \\approx -g_{m1}(g_{m2}-g_{mb2})\\,r_{o1}r_{o2}}\n\\]\n\nIf body effect is small or eliminated (e.g. M<sub>2</sub> in a triple‑well process):\n\n\\[\n\\boxed{A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}\n\\]\n\n**Interpretation:** The gain is the product of M<sub>1</sub>’s transconductance and a very large “effective load resistance” created by the cascode.\n\n---\n\n## 5. Output Resistance \\(R_{out}\\)\n\nSet **v<sub>in</sub> = 0** (so \\(g_{m1}v_{in}=0\\)) and apply a test voltage \\(v_t\\) at v<sub>out</sub>; find the current \\(i_t\\) entering the node.\n\n* Node X: \\(v_x = i_t r_{o1}\\) (only r<sub>o1</sub> to ground).\n* Node v<sub>out</sub>:\n  \\[\n  i_t = \\frac{v_t-v_x}{r_{o2}} - (g_{m2}-g_{mb2})v_x\n  \\]\n\nSolving:\n\n\\[\n\\boxed{R_{out} = \\frac{v_t}{i_t}\n      = r_{o1}+r_{o2}+(g_{m2}-g_{mb2})r_{o1}r_{o2}}\n\\]\n\nAgain \\(g_m r_o \\gg 1\\) gives:\n\n\\[\n\\boxed{R_{out} \\approx (g_{m2}-g_{mb2})\\,r_{o1}r_{o2} \\;\\approx\\; g_{m2}r_{o1}r_{o2}}\n\\]\n\nThis is the classic **cascode output resistance**: it is boosted by a factor \\(\\sim g_{m2}r_{o2}\\) compared with a simple common‑source stage (\\(R_{out}\\approx r_{o1}\\)).\n\n---\n\n## 6. Key Performance Metrics\n\n| Quantity | Expression / Comment |\n|----------|-------------------|\n| **DC bias current** | Fixed by I<sub>1</sub> |\n| **Input resistance** | \\(\\infty\\) (MOS gate) |\n| **Small‑signal gain** | \\(A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}\\) (very high) |\n| **Output resistance** | \\(R_{out}\\approx g_{m2}r_{o1}r_{o2}\\) (very high) |\n| **Output swing limit (low)** | \\(V_{out,min} \\approx V_{OV1}+V_{OV2}\\) (both must stay saturated) |\n| **Body effect** | Reduces effective \\(g_{m2}\\) by \\(g_{mb2}\\); slightly lowers gain & \\(R_{out}\\) |\n\n---\n\n## 7. What If I<sub>1</sub> Is Not Ideal?\n\nIn a real IC, I<sub>1</sub> is implemented by a PMOS current mirror (say M<sub>3</sub>–M<sub>4</sub>), which itself has finite output resistance \\(r_{o,p}\\). Then the total resistance at v<sub>out</sub> is\n\n\\[\nR_{out,tot} = R_{out} \\;\\parallel\\; r_{o,p}\n\\]\n\nand the gain becomes\n\n\\[\nA_v \\approx -g_{m1} \\bigl(R_{out} \\parallel r_{o,p}\\bigr).\n\\]\n\nThe figure explicitly draws I<sub>1</sub> as an **ideal current source**, so the analysis above (with I<sub>1</sub> open for AC) is exact.\n\n---\n\n## 8. Summary\n\n* **M<sub>1</sub>** is the **common‑source** input device.\n* **M<sub>2</sub>** is the **cascode** (common‑gate) device; its gate bias **v<sub>b1</sub>** fixes the DC level of node X.\n* The **ideal current source I<sub>1</sub>** sets the bias current but contributes **infinite AC impedance**, forcing all small‑signal current to circulate inside the M<sub>2</sub>–M<sub>1</sub> stack.\n* The result is a **high‑gain, high‑output‑resistance stage**:\n\n\\[\n\\boxed{A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}, \\qquad\n\\boxed{R_{out} \\approx g_{m2}r_{o1}r_{o2}}.\n\\]\n\nThis is the classic **telescopic cascode gain cell**, widely used in analog ICs (op‑amp gain stages, comparators, etc.) precisely because it achieves very large intrinsic gain with only two transistors.",
        "format": "markdown",
        "sha256": "e89a5e1c90ca0fc6bc5bb0df1eec7596fb8c360aa175707953df15bcb177e13c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the ideal-load gain with body effect omitted, as allowed by the full-credit rule. The detailed body-effect sign is wrong, but does not negate that qualifying result.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24920,
        "total_tokens": 27077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2157,
        "output_tokens": 24920,
        "total_tokens": 27077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, this is a classic cascode structure** (specifically, a common-source amplifier with a cascode transistor).\n\nHere is why:\n\n| Transistor | Connection | Role |\n|---|---|---|\n| **M₁** | Gate = $V_{\\text{in}}$, Source = GND, Drain = node between M₁ and M₂ | **Common-Source (CS)** input device. It converts the input voltage $V_{\\text{in}}$ into a current. |\n| **M₂** | Gate = DC bias $V_{b1}$, Source = drain of M₁, Drain = $V_{\\text{out}}$ | **Common-Gate (CG)** cascode device. Its gate is held at a fixed potential, so it acts as a current buffer. |\n\nThe defining feature of a cascode is the **vertical stacking** of two transistors such that:\n* The drain of the bottom transistor (M₁) is connected directly to the source of the top transistor (M₂).\n* The top transistor (M₂) is biased in common-gate mode ($V_{b1}$ is constant).\n\n### What this achieves:\n1. **Shielding:** Because $V_{b1}$ is fixed, the source voltage of M₂ (and thus the drain voltage of M₁) stays nearly constant ($\\approx V_{b1} - V_{GS2}$). This means M₁’s $V_{DS}$ is held constant, greatly reducing channel-length modulation effects.\n2. **High output resistance:** The small-signal resistance looking into the drain of M₂ is boosted by the intrinsic gain of M₂, so the overall output resistance is much higher than a simple common-source stage.\n3. **Higher gain:** With resistive load $R_D$, the voltage gain is $A_v \\approx -g_{m1}(r_{o2}g_{m2}r_{o1}) \\parallel R_D$, which is significantly larger than the $-g_{m1}R_D$ of a single transistor.\n\nSo, yes—**M₁ and M₂ together form a cascode pair**, with M₂ serving as the cascode transistor that stacks on top of the input transistor M₁. (In full analog design terminology, this particular arrangement is a **telescopic cascode amplifier** when using an active current-source load; with the resistive load $R_D$ shown, it is a resistively-loaded cascode stage.)",
        "format": "markdown",
        "sha256": "bc1d48e3320f40d9b99252aa050b116bd740d0be51c32fd1092aef4ded63b030"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source input device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 5552,
        "total_tokens": 7609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 5552,
        "total_tokens": 7609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, this is a classic cascode structure** — specifically a **common-source / common-gate (CS-CG) cascode amplifier**.\n\nHere is why:\n\n| Transistor | Connection / Role |\n|---|---|\n| **M₁** | **Common-source input device**: Gate = signal input ($V_{in}$), Source = GND, Drain = intermediate node. |\n| **M₂** | **Common-gate cascode device**: Gate = DC bias ($V_{b1}$, AC ground), Source = drain of M₁, Drain = output node ($V_{out}$). |\n\nThe two transistors are **stacked vertically** in series: current flows from $V_{DD}$ through $R_D$, then through M₂ and M₁ to ground.\n\n### Key cascode characteristics present:\n1. **Stacked topology**: The drain of the bottom transistor (M₁) feeds the source of the top transistor (M₂).\n2. **Fixed-gate bias on M₂**: $V_{b1}$ keeps M₂ operating as a common-gate stage.\n3. **High output resistance**: The small-signal resistance looking into the drain of M₂ is boosted by the intrinsic gain of M₂ ($\\approx g_{m2}r_{o2} \\cdot r_{o1}$), which is the defining benefit of a cascode.\n4. **Input at M₁ gate**: $V_{in}$ modulates the current through M₁; M₂ passes this current to the output while shielding M₁ from the large voltage swing at $V_{out}$.\n\nSo this is not just a series connection — it is the textbook **NMOS cascode** (sometimes called a \"telescopic\" cascode when extended with more stacked devices).",
        "format": "markdown",
        "sha256": "fcac6307777a7b634edca2e985466fe51ab767f8c8e4820d9336b3fd2bb53a8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer calls the circuit a cascode, contrary to the essential topology: M₁ is a PMOS source follower with its drain grounded, not a common-source input device. Thus the claimed cascode resistance boost is absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 5588,
        "total_tokens": 7645,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 5588,
        "total_tokens": 7645,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, this is indeed a classic cascode structure** — specifically, it is a **telescopic common-source/common-gate (CS/CG) cascode amplifier**.\n\nHere is why it qualifies:\n\n| Feature | What is shown in the figure |\n|--------|----------------------------|\n| **Bottom transistor (M₁)** | Gate = signal input ($V_{in}$), Source = ground → acts as a **common-source (CS)** stage. |\n| **Top transistor (M₂)** | Gate = fixed DC bias ($V_{b1}$), Source = drain of M₁, Drain = output node ($V_{out}$) → acts as a **common-gate (CG)** \"cascode\" device. |\n| **Stacking** | The two transistors are stacked vertically in series, carrying the **same DC drain current** $I_D$. |\n| **Output** | Taken at the drain of the top transistor ($V_{out}$), with load $R_D$ pulling up to $V_{DD}$. |\n\n### Key cascode characteristics present:\n1. **M₂ shields M₁** from the full voltage swing at $V_{out}$, which drastically reduces the Miller multiplication of $C_{gd}$ of M₁.\n2. **High output resistance**: The small-signal resistance looking up into M₂'s drain is approximately $r_{o2}(1+g_{m2}r_{o1}) + r_{o1}$, which is much larger than a single transistor's $r_o$.\n3. **Fixed $V_{b1}$ bias**: The gate of the cascode transistor M₂ is held at a constant DC potential, not driven by a signal.\n\nSo the circuit is unambiguously a **two-transistor cascode** (M₁ = CS input device, M₂ = CG cascode device).\n\n> **Note:** Both transistors are typically NMOS (as suggested by the ground-referenced source of M₁ and the stacked topology), though the cascode topology is defined by the connection, not just the device polarity. If M₂ were PMOS, it would be a complementary/folded variant, but the figure shows the standard NMOS telescopic cascode.",
        "format": "markdown",
        "sha256": "434891fce9248ef6c89d4ad1c72e5a978b85496ce7ef2bcfd39274b12683a18d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source input device, so the structure lacks cascode output-resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 4675,
        "total_tokens": 6732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2057,
        "output_tokens": 4675,
        "total_tokens": 6732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4331,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies a feedback capacitance \\(C_f\\) that bridges the input and output of a gain stage by the voltage gain across it:\n\n\\[\nC_{\\text{in,eff}} \\approx C_f\\,(1-A_v)\n\\]\n\nIn a single common-source (MOS) or common-emitter (BJT) stage, \\(|A_v|=g_mR_D\\) is large (e.g. 20–100), so \\(C_{gd}\\) (or \\(C_{bc}\\)) appears at the input as a huge capacitance—often 10–50× its physical value—creating a low-frequency input pole that kills bandwidth.\n\nA **cascode** (CS + CG, or CE + CB) fixes this by **splitting the gain into two stages** so that the feedback capacitance of the input device “sees” only a gain of about \\(-1\\), while the full high gain is produced at an isolated output node.\n\n---\n\n### 1. What the cascode looks like\n\n| Device | Role | Terminals (AC) |\n|--------|------|----------------|\n| **M1 / Q1** | Input transconductor (CS/CE) | Gate/Base = \\(v_{\\text{in}}\\); Source/Emitter = GND; Drain/Collector = node **X** |\n| **M2 / Q2** | Cascode device (CG/CB) | Gate/Base = AC ground; Source/Emitter = node **X**; Drain/Collector = \\(v_{\\text{out}}\\) |\n\nThe total gain is high:\n\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx -g_{m1}R_{\\text{out}}, \\qquad R_{\\text{out}}\\approx r_{o1}r_{o2}g_{m2}\n\\]\n\nBut **node X is not the output**.\n\n---\n\n### 2. The critical node: node X\n\nBecause M2/Q2 is a common-gate/base transistor with its control terminal at AC ground, it presents a very low resistance looking into its source/emitter:\n\n\\[\nR_{\\text{in,X}} \\approx \\frac{1}{g_{m2}}\n\\]\n\nM1/Q1 injects a current \\(g_{m1}v_{\\text{in}}\\) into node X, so the AC voltage there is\n\n\\[\nv_X \\approx -g_{m1}v_{\\text{in}} \\times (r_{o1}\\parallel \\frac{1}{g_{m2}}) \\approx -\\frac{g_{m1}}{g_{m2}}v_{\\text{in}} \\approx -v_{\\text{in}}\n\\]\n\n**The gain from input to node X is only about \\(-1\\)** (not \\(-g_mR_D\\)).\n\n---\n\n### 3. Miller multiplication of \\(C_{gd1}\\) (or \\(C_{bc1}\\))\n\nThe feedback capacitance of the **input transistor** connects \\(v_{\\text{in}}\\) to node X:\n\n\\[\nC_{gd1}\\;\\;(\\text{or }C_{bc1})\n\\]\n\nUsing Miller’s theorem, its contribution to the input is:\n\n\\[\nC_{\\text{Miller},1} = C_{gd1}\\left(1-\\frac{v_X}{v_{\\text{in}}}\\right) \\approx C_{gd1}(1+1) = 2C_{gd1}\n\\]\n\nSo instead of being multiplied by the full gain (\\(\\sim\\)100), it is multiplied by **~2**. The input capacitance is essentially:\n\n\\[\nC_{\\text{in}} \\approx C_{gs1} + 2C_{gd1}\n\\]\n\nThis is tiny compared with the single-stage case (\\(C_{gs} + C_{gd}(1+|A_v|)\\)).\n\n---\n\n### 4. Where does the high gain go? It is “shielded”\n\nThe large voltage swing occurs at **\\(v_{\\text{out}}\\)** (node Y), but the capacitance that could feed it back to the input is **not bridging input to output**:\n\n- **\\(C_{gd2}\\)** (MOS) or **\\(C_{bc2}\\)** (BJT) connects the output node to the **AC-grounded** gate/base of M2/Q2. It simply loads \\(v_{\\text{out}}\\); it does not couple back to \\(v_{\\text{in}}\\).\n- M2/Q2 acts as a **current buffer / shield**: it takes the small-signal current from M1 and passes it to the high-impedance output node, but its low input resistance at node X prevents that node from swinging with the large output amplitude.\n\nThus the high-gain “output” is isolated from the input by the cascode device.\n\n---\n\n### 5. Summary in one sentence\n\n> **In a cascode, the feedback capacitance of the input transistor sees a local gain of ~1 because the cascode device clamps its drain/collector node to a low-impedance, small-swing node; the full high gain is developed at a later node that is capacitively isolated from the input, so Miller multiplication is drastically reduced.**\n\nThis is why cascode stages achieve much higher bandwidth (and therefore higher gain–bandwidth product) than a single common-source/common-emitter stage of the same overall gain.",
        "format": "markdown",
        "sha256": "574740bc2885684bb940c3bf07568910b32a6f72d3dbabeb33ad781a52a85514"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cascode device’s low-impedance source node, the resulting roughly −1 gain across the input device’s feedback capacitance, and the approximately 2× rather than full-stage-gain Miller multiplication. Minor simplifications do not affect the explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 6236,
        "total_tokens": 6263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 6236,
        "total_tokens": 6263,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect multiplies a feedback capacitance by the voltage gain across it:\n\n\\[\nC_{\\text{in,eff}} = C\\,(1-A_v)\n\\]\n\nIn a single common‑emitter (BJT) or common‑source (MOS) stage the parasitic capacitance between input and output—\\(C_{bc}\\) (or \\(C_\\mu\\)) / \\(C_{gd}\\)—sees the **full** stage gain, which is large (\\(A_v\\approx -g_mR_L\\)). The effective input capacitance becomes enormous (\\(\\approx C_{gd}g_mR_L\\)) and kills bandwidth.\n\nA **cascode** breaks this by splitting the work into two devices:\n\n| Device | Function | Terminal connections |\n|--------|----------|----------------------|\n| **Input** \\(Q_1/M_1\\) | Transconductance (CE/CS) | Input at base/gate; output current at collector/drain |\n| **Cascode** \\(Q_2/M_2\\) | Current buffer (CB/CG) | Input at emitter/source; output at collector/drain |\n\nThe key is what happens at the **intermediate node** \\(X\\) (collector of \\(Q_1\\) / drain of \\(M_1\\), which is also the emitter/source of \\(Q_2/M_2\\)).\n\n---\n\n### 1. The intermediate node has a very low impedance\nLooking into the emitter of a common‑base BJT (or source of a common‑gate MOS) whose base/gate is at AC ground:\n\n\\[\nR_{\\text{in},2} \\approx \\frac{1}{g_{m2}}\n\\]\n\nSo node \\(X\\) is loaded by \\(\\approx 1/g_{m2}\\), not by a high resistance.\n\n---\n\n### 2. The gain **to node X** is small—only ~ –1\nThe input transistor converts \\(v_{\\text{in}}\\) to a current \\(g_{m1}v_{\\text{in}}\\). That current flows through the low impedance at node \\(X\\):\n\n\\[\nv_X \\approx -g_{m1}v_{\\text{in}}\\,(r_{o1}\\parallel R_{\\text{in},2}) \\approx -g_{m1}v_{\\text{in}}\\frac{1}{g_{m2}} \\approx -v_{\\text{in}}\n\\]\n\nThus the gain from the **input** to the **intermediate node** is:\n\n\\[\nA_{vX} = \\frac{v_X}{v_{\\text{in}}} \\approx -1\n\\]\n\n---\n\n### 3. The feedback capacitance of the input device sees only this small gain\nThe parasitic capacitance \\(C_{bc1}\\) (BJT) or \\(C_{gd1}\\) (MOS) connects the input to node \\(X\\), not to the final high‑voltage output.\n\n\\[\nC_{\\text{eff},1} = C_{bc1/gd1}\\,(1-A_{vX}) \\approx C_{bc1/gd1}(1-(-1)) = 2C_{bc1/gd1}\n\\]\n\nInstead of being multiplied by the overall stage gain (\\(\\sim 100\\)–\\(1000\\)), it is multiplied by only **~2**.\n\n---\n\n### 4. The high overall gain is “hidden” from the feedback path\nThe cascode transistor \\(Q_2/M_2\\) passes the current from node \\(X\\) to the **output** node, where it develops a huge voltage across a high impedance (\\(R_{\\text{out}}\\approx g_{m2}r_{o2}r_{o1}\\)):\n\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\approx -g_{m1}R_{\\text{out}} \\quad \\text{(very large)}\n\\]\n\nBut the feedback capacitance of \\(Q_2/M_2\\) (\\(C_{bc2}/C_{gd2}\\)) is connected between the output and **AC ground** (its base/gate is biased at DC, bypassed for AC). It therefore contributes load capacitance, not Miller multiplication at the input.\n\nAdditionally, the common‑base/gate device provides **reverse isolation**: a large swing at the output does not easily feed back to node \\(X\\) because \\(Q_2/M_2\\) presents a high impedance looking **up** from node \\(X\\) to the output.\n\n---\n\n### Summary\nIn a cascode, the input transistor’s drain/collector is pinned to a low‑impedance node (\\(\\approx 1/g_m\\)) rather than to the high‑gain output. Consequently, the voltage gain across the input device’s parasitic feedback capacitance is only \\(\\approx -1\\), so the Miller multiplication is reduced from \\(\\sim (1+g_mR_L)\\) to \\(\\sim 2\\). The stage achieves high gain at the final output node through the cascode device, but that large gain is **not** seen by the input‑to‑intermediate‑node capacitance. The result is much lower effective input capacitance and far wider bandwidth.",
        "format": "markdown",
        "sha256": "3571590968daa3944a23506cf949f25b7ed327893b992c14ee715d3502790300"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode intermediate node and derives an input-to-node gain of about −1, so the input transistor’s feedback capacitance is multiplied by roughly 2 rather than the full stage gain. This matches the essential explanation; it does not overstate the effect as negligible.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 5222,
        "total_tokens": 5249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3885,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 5222,
        "total_tokens": 5249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3885,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies any capacitance that bridges the input and output of a gain stage by the voltage gain across it:\n\n\\[\nC_{\\text{eff}} = C\\,(1-A_v)\n\\]\n\nFor a high-gain inverting stage (\\(A_v \\approx -g_m R_D \\ll -1\\)), a small overlap capacitance such as \\(C_{gd}\\) (MOS) or \\(C_{\\mu}\\) (BJT) becomes enormous at the input:\n\n\\[\nC_{\\text{Miller}} \\approx C_{gd}(1+|A_v|) \\approx C_{gd}g_m R_D\n\\]\n\nThis creates a low-frequency input pole and kills bandwidth.\n\nA **cascode** (common-source + common-gate, or CE + CB) fixes this by **moving the high-gain node away from the input transistor’s drain/collector**.\n\n---\n\n### 1. What the cascode looks like\n\n```\nVin  → G1 (M1/Q1)  →  D1/S2  →  D2 (M2/Q2)  →  Vout\n                ↑         ↑\n             S1=Gnd     G2 = constant bias (AC ground)\n```\n\n- **M1/Q1** is the input transconductor (CS/CE).\n- **M2/Q2** is the cascode device (CG/CB). Its gate/base is held at a fixed DC voltage, so it is an **AC ground**.\n- The **output** is taken at the drain/collector of M2.\n\n---\n\n### 2. The intermediate node has very small gain\n\nThe drain of M1 (node **X**) is connected to the **source** of M2. A common-gate/common-base transistor presents a low input resistance at its source:\n\n\\[\nR_{\\text{in,source}} \\approx \\frac{1}{g_{m2}} \\quad (\\text{more precisely } \\frac{r_{o2}+R_D}{1+g_{m2}r_{o2}})\n\\]\n\nM1 delivers a small-signal current \\(i_{d1} = g_{m1}v_{\\text{in}}\\). Because node X sees this low resistance to “ground” (through M2), the voltage there cannot swing much:\n\n\\[\nv_x \\approx -\\,i_{d1} \\cdot \\frac{1}{g_{m2}} \\approx -\\frac{g_{m1}}{g_{m2}}v_{\\text{in}} \\approx -v_{\\text{in}}\n\\]\n\nSo the voltage gain **from the global input to the intermediate node X** is only about **\\(-1\\)** (or slightly less/more depending on device sizing), **not** the large output gain.\n\n---\n\n### 3. Miller multiplication on \\(C_{gd1}\\) (or \\(C_{\\mu 1}\\)) is tiny\n\nThe bridging capacitance of the input device (\\(C_{gd1}\\)) connects \\(v_{\\text{in}}\\) to node X. Its Miller factor uses the gain **to that node**, not to the final output:\n\n\\[\nC_{\\text{eff},gd1} = C_{gd1}\\bigl(1 - \\frac{v_x}{v_{\\text{in}}}\\bigr) \\approx C_{gd1}(1 + 1) = 2C_{gd1}\n\\]\n\nCompare to a simple CS stage where the same capacitance sees the full output gain:\n\n\\[\nC_{\\text{eff},gd} \\approx C_{gd}(1 + g_m R_D) \\gg C_{gd}\n\\]\n\nThus the input capacitance is reduced from **\\(C_{gd} \\times\\) (large gain)** to just **\\(\\approx 2C_{gd}\\)**.\n\n---\n\n### 4. The high gain is isolated at the output\n\nThe large voltage gain of the cascode is realized **only at the drain of M2**:\n\n\\[\nA_{v,\\text{out}} \\approx -g_{m1} R_{\\text{out}}, \\qquad R_{\\text{out}} \\approx g_{m2}r_{o2}r_{o1}\n\\]\n\nBut the capacitance bridging the output back to the input is **not** present:\n\n- **\\(C_{gd2}\\)** connects the output to M2’s **gate**, which is AC ground. It is just a load capacitor at the output; it does **not** feedback to \\(v_{\\text{in}}\\).\n- The cascode transistor acts as a **current buffer**: it passes \\(g_{m1}v_{\\text{in}}\\) to the high-impedance output node without allowing that large output swing to appear at node X.\n\nBecause node X is a **low-impedance, small-swing node**, any capacitance attached to it (\\(C_{db1}, C_{gs2}, C_{db2}\\)) forms a **high-frequency pole** (\\( \\tau \\approx R_X C_X \\approx C_X/g_{m2}\\)) and does not burden the input.\n\n---\n\n### 5. Summary in one sentence\n\n> **In a cascode, the bridging capacitance of the input transistor sees a gain of only \\(\\approx -1\\) to the intermediate node, so its Miller multiplication is \\(\\sim 2\\times\\) instead of \\((1+|A_v|)\\); the large gain is generated at the isolated output node of the cascode device, preventing feedback to the input.**\n\nThis is why cascodes are used in high-frequency amplifiers (RF LNAs, high-speed op-amp stages, etc.): they deliver high gain and high output impedance while keeping the input capacitance low and the bandwidth wide.",
        "format": "markdown",
        "sha256": "3761687faa3eae3f4026a2340873c49e739d4bed222f41691fe8354e457ca8e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance M1-drain/M2-source node, derives an approximately −1 gain there, and explains why Cgd1 is multiplied by about 2 rather than by the full stage gain. Minor peripheral imprecision does not affect the essential explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 9949,
        "total_tokens": 9976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 9949,
        "total_tokens": 9976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **common-source (CS) amplifier with an active PMOS load** (sometimes called a CS stage with current-source load).  \nIt uses two MOSFETs:\n\n* **M₁** – PMOS transistor that acts as the active load / current source.\n* **M₂** – NMOS transistor that is the input (common-source) device.\n\nThe ports are:\n* **V_DD** – positive supply.\n* **v_b2** – DC bias for the gate of M₁.\n* **v_in** – small-signal input applied to the gate of M₂.\n* **v_b1** – DC voltage applied to the **source** of M₂ (so V_GS₂ = v_in – v_b1).\n* **V_out** – output node (the common drain connection of M₁ and M₂).\n\nBelow is a systematic DC and small-signal analysis.  I assume both devices operate in **saturation** (the region required for amplification) and that v_b1 and v_b2 are ideal DC sources (zero AC impedance, i.e. AC grounds).\n\n---\n\n## 1. DC Operating-Point Analysis\n\nBecause M₁ and M₂ are stacked between V_DD and v_b1, they share the same DC drain current:\n\n$$I_{D1} = I_{D2} = I_D$$\n\n### PMOS load M₁\n* Source: V_DD\n* Gate: v_b2\n* Drain: V_out\n\n$$V_{SG1} = V_{DD} - v_{b2}$$\n$$V_{SD1} = V_{DD} - V_{out}$$\n\nUsing the square-law model with channel-length modulation $\\lambda_p$:\n\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(V_{SG1} - |V_{thp}|\\right)^2 \\left(1+\\lambda_p V_{SD1}\\right)$$\n\n### NMOS driver M₂\n* Source: v_b1\n* Gate: v_in (DC component $V_{in,DC}$)\n* Drain: V_out\n\n$$V_{GS2} = V_{in,DC} - v_{b1}$$\n$$V_{DS2} = V_{out} - v_{b1}$$\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left(V_{GS2} - V_{thn}\\right)^2 \\left(1+\\lambda_n V_{DS2}\\right)$$\n\n### Solving for V_out\nSet the two current expressions equal.  In practice:\n* **v_b2** is chosen to set the bias current $I_D$ (through M₁).\n* **V_in,DC** (or v_b1) is chosen so that M₂ delivers the same $I_D$.\n\nWith $\\lambda \\approx 0$ for hand estimates, the current is essentially fixed by the “overdrive” voltages:\n\n$$I_D \\approx \\frac{1}{2}k_p(V_{DD}-v_{b2}-|V_{thp}|)^2 \\approx \\frac{1}{2}k_n(V_{in,DC}-v_{b1}-V_{thn})^2$$\n\nwhere $k = \\mu C_{ox}(W/L)$.\n\nTo keep both devices in saturation:\n\n**M₁ (PMOS):** $\\; V_{SD1} \\ge V_{SG1}-|V_{thp}| \\;\\Rightarrow\\; V_{out} \\le v_{b2}+|V_{thp}|$\n\n**M₂ (NMOS):** $\\; V_{DS2} \\ge V_{GS2}-V_{thn} \\;\\Rightarrow\\; V_{out} \\ge v_{b1} + (V_{in,DC}-v_{b1}-V_{thn})$\n\nThese inequalities determine the allowable range of $V_{out}$.\n\n---\n\n## 2. Small-Signal Analysis\n\nFor AC signals:\n* **V_DD**, **v_b1**, and **v_b2** are grounds.\n* Therefore:\n  * M₁’s source is at AC ground; its gate is also at AC ground $\\Rightarrow v_{sg1}=0$.\n  * M₂’s source is at AC ground; its gate sees $v_{in}$ $\\Rightarrow v_{gs2}=v_{in}$.\n\n### Small-signal models\n* **M₁** contributes only its output resistance $r_{o1} = 1/(\\lambda_p I_D)$ between V_out and ground (its $g_{m1}$ source is zero because $v_{sg1}=0$).\n* **M₂** contributes a controlled source $g_{m2}v_{in}$ (from drain to source) in parallel with $r_{o2}=1/(\\lambda_n I_D)$.\n\nThe equivalent circuit at node $V_{out}$ is therefore:\n\n* Current source $g_{m2}v_{in}$ pulling down from $V_{out}$ to ground.\n* Resistor $r_{o2}$ from $V_{out}$ to ground.\n* Resistor $r_{o1}$ from $V_{out}$ to ground (through M₁ to V_DD/AC ground).\n\nApplying KCL at $V_{out}$:\n\n$$g_{m2}v_{in} + \\frac{V_{out}}{r_{o2}} + \\frac{V_{out}}{r_{o1}} = 0$$\n\n$$\\boxed{V_{out} = -g_{m2}\\,(r_{o1}\\parallel r_{o2})\\,v_{in}}$$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1}\\parallel r_{o2})}$$\n\nUsing $g_{m2} = 2I_D/V_{OV2}$ and $r_o \\approx 1/(\\lambda I_D)$:\n\n$$|A_v| \\approx \\frac{2}{V_{OV2}(\\lambda_n+\\lambda_p)}$$\n\nBecause $r_{o1}$ and $r_{o2}$ are both high (current-source loads have high output resistance), this topology gives **much larger gain** than a resistive-load common-source stage.\n\n### Resistances\n* **Input resistance:** $\\displaystyle R_{in} = \\infty$ (MOSFET gate).\n* **Output resistance:** $\\displaystyle R_{out} = r_{o1}\\parallel r_{o2} = \\frac{1}{I_D(\\lambda_n+\\lambda_p)}$.\n\n---\n\n## 3. Role of the Bias Voltages\n\n| Bias | Function |\n|------|----------|\n| **v_b2** | Sets $V_{SG1}$ and therefore the DC current $I_D$ of the PMOS load. By adjusting v_b2, the designer fixes $I_D$ and $r_{o1}$. |\n| **v_b1** | Sets the DC potential of M₂’s source, hence $V_{GS2} = V_{in,DC}-v_{b1}$. For small-signal analysis it is an AC ground, so it does **not** appear in the gain formula directly; it only influences $I_D$, $g_{m2}$, and $r_{o2}$ through the DC operating point. |\n| **v_in** | The signal input. Its AC component produces $v_{gs2}=v_{in}$ and thus the controlled current $g_{m2}v_{in}$. |\n\n### Note on body effect\nIf M₂ is an NMOS built in a common p-substrate and its **body (bulk)** is tied to ground rather than to its source v_b1, then a non-zero source-to-body voltage exists:\n\n$$v_{SB} = v_{b1} - 0 = v_{b1}$$\n\nThe threshold voltage is then increased by the body effect:\n\n$$V_{thn} = V_{thn0} + \\gamma\\left(\\sqrt{2\\phi_F + v_{SB}} - \\sqrt{2\\phi_F}\\right)$$\n\nThis reduces $g_{m2}$ for a given $V_{GS2}$.  To avoid this, many designs tie the source and body together ($v_{SB}=0$); in that case v_b1 is simply the DC source terminal and the above gain formula applies directly.\n\n---\n\n## 4. Summary of Key Results\n\n| Quantity | Expression |\n|----------|------------|\n| DC current | $I_D = I_{D1} = I_{D2}$ (set by v_b2 and v_in,DC) |\n| Small-signal gain | $\\displaystyle A_v = -g_{m2}(r_{o1}\\parallel r_{o2})$ |\n| Output resistance | $\\displaystyle R_{out} = r_{o1}\\parallel r_{o2}$ |\n| Input resistance | $R_{in} = \\infty$ |\n| Saturation (M₁) | $V_{out} \\le v_{b2}+|V_{thp}|$ |\n| Saturation (M₂) | $V_{out} \\ge v_{b1} + V_{OV2}$ |\n\n**In short:** The circuit is a high-gain common-source amplifier. M₁ acts as a high-output-resistance current-source load (controlled by v_b2), while M₂ converts $v_{in}$ into a current $g_{m2}v_{in}$ that develops the output voltage across the parallel combination of $r_{o1}$ and $r_{o2}$. The DC source v_b1 sets the source potential of the input transistor, determining the DC overdrive and hence $g_{m2}$, but does not appear in the small-signal gain because it is AC ground.",
        "format": "markdown",
        "sha256": "8767b8f2ab8b9bc5b7c4ff6773beb6ab0b5a1e7cb7bc0728fce88fc9c530164c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, contradicting the essential common-gate topology; the golden solution explicitly assigns 0 for this error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19272,
        "total_tokens": 21377,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19272,
        "total_tokens": 21377,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **common-source (CS) amplifier with an active PMOS current-source load** (sometimes called a “CMOS common-source stage with current-source load”). It consists of two complementary MOSFETs stacked between the supply $V_{DD}$ and the DC bias node $V_{b1}$, with the output taken at the shared drain node $V_{out}$.\n\nBelow is a systematic analysis.\n\n---\n\n## 1. Component Identification & Topology\n\n| Transistor | Type | Terminal Connections | Role |\n|------------|------|----------------------|------|\n| **$M_1$** | **PMOS** (source at $V_{DD}$) | Source $\\to V_{DD}$; Gate $\\to V_{b2}$; Drain $\\to V_{out}$ | Active load / current-source load |\n| **$M_2$** | **NMOS** (source at $V_{b1}$) | Drain $\\to V_{out}$; Gate $\\to V_{in}$; Source $\\to V_{b1}$ | Input amplifying device |\n\n- **$V_{DD}$**: Positive DC supply (AC ground).\n- **$V_{b2}$**: DC gate bias for $M_1$; fixes the load current independently.\n- **$V_{b1}$**: DC voltage at the source of $M_2$ (often ground, $V_{SS}$, or a deliberate level-shift/bias).\n- **$V_{in}$**: Small-signal AC input applied to $M_2$’s gate.\n- **$V_{out}$**: High-impedance output node (drains of both devices).\n\nThe two transistors carry the **same DC current** $I_D$ because they are in series:\n$$V_{DD} \\;\\rightarrow\\; M_1 \\;\\rightarrow\\; V_{out} \\;\\rightarrow\\; M_2 \\;\\rightarrow\\; V_{b1}$$\n\n---\n\n## 2. DC Operating-Point (Bias) Analysis\n\nBoth devices are biased in **saturation** (active region) to obtain high gain.\n\n### For $M_2$ (NMOS)\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left(V_{GS2} - V_{thn}\\right)^2 \\left(1+\\lambda_n V_{DS2}\\right)$$\n\nwhere\n- $V_{GS2} = V_{in,DC} - V_{b1}$\n- $V_{DS2} = V_{out,DC} - V_{b1}$\n\nBecause $V_{b1}$ is a fixed DC source, $M_2$’s source potential is constant; if $V_{b1}$ is not at the body/substrate potential, a **body effect** raises $V_{thn}$ via $V_{SB2} = V_{b1} - V_{body}$.\n\n### For $M_1$ (PMOS)\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(V_{SG1} - |V_{thp}|\\right)^2 \\left(1+\\lambda_p V_{SD1}\\right)$$\n\nwhere\n- $V_{SG1} = V_{DD} - V_{b2}$\n- $V_{SD1} = V_{DD} - V_{out,DC}$\n\n### Solving for $V_{out,DC}$\nEquating the two expressions for $I_D$ yields a nonlinear equation for $V_{out,DC}$. In practice, $V_{b2}$ is chosen so that $M_1$ delivers the desired $I_D$ (e.g., the quiescent current of the stage), and $V_{in,DC}$ is chosen so $M_2$ operates at the same $I_D$ with $V_{out,DC}$ near the middle of the available swing ($V_{b1} + V_{DS2,sat} < V_{out} < V_{DD} - V_{SD1,sat}$).\n\n---\n\n## 3. Small-Signal Analysis\n\nFor AC signals:\n- $V_{DD}$, $V_{b1}$, and $V_{b2}$ are **AC grounds** (zero impedance).\n- $V_{in} = v_{in}$ is the signal source.\n- $v_{out}$ is the output.\n\n### Transistor Small-Signal Models\n- **$M_2$ (NMOS)**: Gate driven by $v_{in}$; source at AC ground; drain at $v_{out}$.\n  - Transconductance current: $g_{m2}v_{gs2} = g_{m2}v_{in}$ (flows from drain to source).\n  - Output resistance: $r_{o2}$ between drain and source.\n  \n- **$M_1$ (PMOS)**: Gate at AC ground; source at AC ground ($V_{DD}$); drain at $v_{out}$.\n  - Because both $v_{g1}$ and $v_{s1}$ are zero: $v_{sg1} = 0$.\n  - Thus $M_1$ contributes **no controlled current source**; it acts only as an output resistance $r_{o1}$ between $v_{out}$ and AC ground.\n\n### Equivalent Circuit at $V_{out}$\nThe node $V_{out}$ sees two resistances to ground in parallel:\n- $r_{o1}$ (through $M_1$ to $V_{DD}$)\n- $r_{o2}$ (through $M_2$ to $V_{b1}$)\n\nplus a current source $g_{m2}v_{in}$ sinking current from $v_{out}$ to ground.\n\nApplying KCL at $v_{out}$:\n$$g_{m2}v_{in} + \\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} = 0$$\n\n### Voltage Gain\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}\\left(r_{o1} \\parallel r_{o2}\\right)}$$\n\nThis is a **very high gain** because $r_{o1}$ and $r_{o2}$ are both large (on the order of $10^3$–$10^5\\;\\Omega$ in modern short-channel devices, and even larger in long-channel).\n\n### Output Resistance\n$$\\boxed{R_{out} = r_{o1} \\parallel r_{o2}}$$\n\n### Input Resistance\n$$\\boxed{R_{in} = \\infty}$$\n(The gate of $M_2$ draws zero DC and zero AC current.)\n\n---\n\n## 4. Role of the Bias Voltages\n\n| Bias | Function |\n|------|----------|\n| **$V_{b2}$** | Sets $I_D$ for $M_1$. By adjusting $V_{b2}$, you change $V_{SG1}$ and therefore the load current. This decouples the DC current from $V_{out,DC}$. |\n| **$V_{b1}$** | Sets the DC source voltage of $M_2$. It allows shifting $V_{GS2}$ without changing $V_{in,DC}$, and can be used to avoid body-effect penalties (if $V_{b1} = V_{body}$) or to provide headroom in low-voltage designs. |\n\nIf $V_{b1} = 0$ (ground), $M_2$’s source is grounded and the circuit is the classic **CMOS common-source amplifier with current-source load**.\n\n---\n\n## 5. Key Performance Characteristics\n\n| Parameter | Expression / Comment |\n|-----------|-------------------|\n| **Gain** | $-g_{m2}(r_{o1}||r_{o2})$; typically $-20$ to $-80$ dB (i.e., $-10$ to $-1000$ V/V) depending on technology. |\n| **Output Swing** | $V_{out}$ can swing between $\\approx V_{b1}+V_{DS2,sat}$ and $\\approx V_{DD}-V_{SD1,sat}$. |\n| **Linearity** | Limited by square-law $I_D$–$V_{GS}$ of $M_2$; for small $v_{in}$ it is linear. |\n| **Bandwidth** | Dominated by $R_{out}C_{L}$ (where $C_L$ is the load capacitance at $V_{out}$) plus Miller effect on $C_{gd2}$. |\n| **Noise** | Dominant contributions: $M_2$’s thermal/flicker noise (input device) and $M_1$’s thermal noise (load device, scaled by its $g_m$). |\n\n---\n\n## 6. Summary\n\nThis is a **high-gain analog voltage amplifier** built from two stacked MOSFETs:\n- **$M_2$** converts $v_{in}$ to a drain current $g_{m2}v_{in}$.\n- **$M_1$** acts as a high-resistance load ($r_{o1}$) because its gate is held at a fixed DC potential ($V_{b2}$).\n- The combination produces an output resistance $R_{out} = r_{o1}||r_{o2}$ and a voltage gain equal to $-g_{m2}R_{out}$.\n\nIt is widely used as the **input stage of operational amplifiers**, in **analog signal-processing chains**, and as a **gain cell** in mixed-signal systems where a single-stage high gain is needed with minimal transistor count.\n\nIf you have a specific question about this circuit (e.g., derive $V_{out,DC}$ for given $W/L$ ratios, include body effect explicitly, or design $V_{b2}$ for a target $I_D$), please specify and I can work through the detailed numerical or symbolic derivation.",
        "format": "markdown",
        "sha256": "ea48a79003fe535f4264a8513b026fc1e55d8d491f336c1a12b2f60fb8730b91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, contradicting the essential topology: Vin is applied at M2’s source in a common-gate stage. The gain polarity and input-resistance conclusions are therefore also wrong.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 18419,
        "total_tokens": 20524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13382,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 18419,
        "total_tokens": 20524,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13382,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, this is a **two-transistor common-source amplifier with an active PMOS load** (sometimes called a “current-source-loaded” or “active-load” inverter stage). The two devices share the output node $V_{out}$ and are stacked between $V_{DD}$ and ground.\n\n---\n\n### 1. Component Identification & Connections\n\n| Device | Type (inferred from symbols & connections) | Key Terminals |\n|--------|------------------------------------------|---------------|\n| **$M_1$** | **PMOS** | Source $\\to V_{DD}$; Gate $\\to V_{b2}$; Drain $\\to V_{out}$; Body (n-well) $\\to V_{DD}$ (implicit) |\n| **$M_2$** | **NMOS** | Drain $\\to V_{out}$; Gate $\\to V_{in}$; Source $\\to \\text{GND}$; Body (p-substrate) $\\to V_{b1}$ |\n\nThe arrow on $M_2$ points from its **body terminal ($V_{b1}$)** toward the channel, confirming the body is separately biased. The ground symbol is on $M_2$’s **source** terminal.\n\nThus the DC current path is:\n$$V_{DD} \\;\\xrightarrow{M_1}\\; V_{out} \\;\\xrightarrow{M_2}\\; \\text{GND}$$\n\n---\n\n### 2. DC Operating-Point Analysis\n\nBecause $M_1$ and $M_2$ are in series at $V_{out}$, their DC drain currents are identical:\n$$I_{D1} = I_{D2} \\equiv I_D$$\n\n#### $M_1$ (PMOS active load)\nIts gate is held at a fixed DC bias $V_{b2}$, so it acts as a **current source** (or “load transistor”).\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(V_{SG1} - |V_{thp}|\\right)^2$$\nwhere $V_{SG1} = V_{DD} - V_{b2}$.\n\nThe value of $V_{b2}$ therefore **programs** the current $I_D$.\n\n#### $M_2$ (NMOS input device)\nIts gate is driven by $V_{in}$, which has a DC component $V_{IN}$ (bias point) plus a small AC signal.\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left(V_{GS2} - V_{thn}\\right)^2$$\nwhere $V_{GS2} = V_{IN}$ (source is grounded).\n\n**Body-effect (threshold tuning):** Because $M_2$’s source is at 0 V but its body is at $V_{b1}$, the source-to-body voltage is\n$$V_{SB} = 0 - V_{b1} = -V_{b1}$$\nThe threshold is adjusted by the body-effect equation:\n$$V_{thn} = V_{th0} + \\gamma\\left(\\sqrt{2\\phi_f + V_{SB}} - \\sqrt{2\\phi_f}\\right)$$\n\n- **Reverse body bias** ($V_{b1} < 0$): $V_{SB} > 0$ $\\Rightarrow$ $V_{thn}$ **increases** (reduces leakage, lowers $g_m$).\n- **Forward body bias** ($0 < V_{b1} \\lesssim 0.3\\,\\text{V}$): $V_{thn}$ **decreases** (enables lower $V_{DD}$ operation, raises $g_m$).\n\n#### Solving for $V_{out}$\nThe output DC voltage is found by intersecting the $I$–$V$ curves:\n- For $M_1$ (PMOS saturation): $V_{SD1} = V_{DD} - V_{out} \\ge V_{SG1} - |V_{thp}|$\n- For $M_2$ (NMOS saturation): $V_{DS2} = V_{out} \\ge V_{GS2} - V_{thn}$\n\nTypically $V_{out}$ sits at a value where both devices are in saturation, giving high small-signal gain.\n\n---\n\n### 3. Small-Signal (AC) Analysis\n\nReplace DC sources with AC grounds:\n- $V_{DD} \\to$ AC ground\n- $V_{b2} \\to$ AC ground $\\Rightarrow M_1$ becomes a resistance $r_{o1}$\n- $V_{b1} \\to$ AC ground $\\Rightarrow V_{sb} = 0$ for AC, so **no $g_{mb}$ term** appears (only the DC $V_{th}$ is modified)\n\nThe small-signal model at $V_{out}$:\n\n- $M_2$ provides transconductance $g_{m2} = \\frac{2I_D}{V_{GS2}-V_{thn}}$\n- $M_2$ output resistance: $r_{o2} = \\frac{1}{\\lambda_n I_D}$\n- $M_1$ output resistance: $r_{o1} = \\frac{1}{\\lambda_p I_D}$\n\nBecause $V_{in}$ drives the gate of $M_2$ and the sources of both devices are AC-grounded, this is a **common-source** stage with resistive load $r_{o1}$.\n\nThe voltage gain is:\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1} \\parallel r_{o2})}$$\n\nSince $r_{o1}, r_{o2} \\propto 1/I_D$, the gain can be very large (tens to hundreds) compared to a passive-resistor load.\n\n---\n\n### 4. Role of the Independent Bias Voltages\n\n| Bias | Function | Design Impact |\n|------|----------|---------------|\n| **$V_{b2}$** | Sets $V_{SG1}$ $\\Rightarrow$ fixes $I_D$ | Controls $g_{m2}$, $r_o$, and headroom; allows current programming without tying $M_1$ diode-style to $V_{out}$. |\n| **$V_{b1}$** | Body bias of $M_2$ | Tunes $V_{thn}$ via body effect; used for **threshold management** (e.g., forward body bias to lower $V_{DD}$ requirements, or reverse body bias to reduce subthreshold leakage). |\n\n---\n\n### 5. Summary of Key Properties\n\n1. **Topology:** Common-source amplifier ($M_2$) with PMOS active-load/current-source ($M_1$).\n2. **DC:** $I_{D1}=I_{D2}=I_D$; $V_{b2}$ programs $I_D$; $V_{b1}$ shifts $V_{thn}$ of $M_2$.\n3. **Gain:** High, $A_v \\approx -g_{m2}(r_{o1}||r_{o2})$.\n4. **Output resistance:** $R_{out} = r_{o1}||r_{o2}$.\n5. **Input resistance:** Very high ($\\approx \\infty$ for DC/low-frequency, set by $M_2$’s gate oxide).\n6. **Body-effect utilization:** $V_{b1}$ decouples threshold control from current control, which is valuable in low-voltage/low-power analog design.\n\nIf you need a specific result—such as deriving the exact $V_{out}$ expression, calculating $A_v$ for given $W/L$ ratios, or analyzing the body-effect contribution when $V_{b1}$ is not AC ground—let me know the device parameters (or the intended operating region), and I can compute the explicit DC and AC expressions.",
        "format": "markdown",
        "sha256": "3788fc63b99ac48a1334730aac91d6bb6da1b824510c40ed0625187f00738964"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, whereas the circuit is common-gate with Vin at M2’s source. The golden solution explicitly assigns 0 for this topology error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19055,
        "total_tokens": 21160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2105,
        "output_tokens": 19055,
        "total_tokens": 21160,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16657,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a **common‑source stage (M₁)** whose drain is tied to the output node **V_out**, together with a second transistor **M₂** (load or complementary device) also connected to **V_out**.  \nFor small‑signal analysis the DC supplies are grounds, so the only **independent nodes** (excluding ground) are:\n\n1. The common **gate node** of M₁ (and of M₂, connected via the vertical branch), i.e. the node driven through **Rₛ**.\n2. The **output node V_out** (the common drain node).\n\nBecause there are **two state nodes**, the five intrinsic capacitances collapse onto just **three effective branches**:\n\n- **C_GS** from node 1 → ground  \n- **C_GD** (plus **C_GD₂** if M₂’s gate is on the same node) between node 1 and **V_out**  \n- **C_DB + C_DB₂** from **V_out** → ground\n\nHence the transfer function **V_out / V_in** is governed by **two first‑order node equations**, i.e. it is a **second‑order** system.\n\n\\[\n\\boxed{\\text{The circuit has 2 poles (and 1 zero due to the C}_{GD}\\text{ feedthrough).}}\n\\]\n\n*Quick check:*  \n- 2 nodes ⇒ 2 energy‑storage degrees of freedom ⇒ **2 poles**.  \n- The source resistance **Rₛ** sets the input time constant; **C_GD** introduces the familiar right‑half‑plane (or left‑half‑plane) zero; **C_DB**, **C_DB₂** set the output time constant.\n\nSo, despite five physical capacitors (**C_GS, C_GD, C_DB, C_GD₂, C_DB₂**), the topology as drawn yields **two poles**.",
        "format": "markdown",
        "sha256": "ee29e874a5b3cf94333a42a70b829b9b3a4e2710d2eea40fcbbfa3dcd1143f85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes there are two poles and identifies the gate and output as the two nodes, but incorrectly treats M₂’s gate as connected to the input node and misassigns C_GD₂. The golden solution caps this kind of capacitor/topology error at 3.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 29484,
        "total_tokens": 31801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 29484,
        "total_tokens": 31801,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, we can identify **three independent nodes** (excluding ground) where energy is stored by capacitors:\n\n1. **Node A** (the input node after $R_S$): has $C_{GS}$ to ground, plus cross-coupling capacitors $C_{GD}$ and $C_{GD2}$.\n2. **Node B** ($V_{out}$): has $C_{DB}$ to ground, plus $C_{GD}$ to Node A, and is connected to transistor $M_1$ (and to $M_2$'s source).\n3. **Node C** (the upper drain node of $M_2$): has $C_{DB2}$ to ground, plus $C_{GD2}$ to Node A.\n\nThe five explicit capacitors are:\n- $C_{GS}$, $C_{GD}$, $C_{DB}$ (around $M_1$)\n- $C_{GD2}$, $C_{DB2}$ (around $M_2$)\n\nIn the capacitor-only graph (nodes: A, B, C, GND; edges: the 5 capacitors), the number of independent all-capacitor loops is:\n\n- Loop 1: $C_{GS} \\rightarrow C_{DB} \\rightarrow C_{GD}$\n- Loop 2: $C_{GS} \\rightarrow C_{DB2} \\rightarrow C_{GD2}$\n\nSo with $N_C = 5$ capacitors and $N_L = 2$ independent loops, the number of independent state variables (and thus the order of the characteristic polynomial / number of poles of $V_{out}/V_{in}$) is:\n\n$$\\boxed{3 \\text{ poles}}$$\n\n(The two loops reduce the 5 capacitors to **3 independent state variables**, corresponding to the voltages at nodes A, B, and C.)",
        "format": "markdown",
        "sha256": "1272e4c1e0326542f2ec38737be87e74f6f10369bf784ce244cf9c3b9de5c1ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit has two poles: the upper terminal of M2 is not a separate signal node, and CGD2 is tied to AC ground through M2’s grounded gate. The claimed third node and three-pole count rely on incorrect capacitor connections.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 23458,
        "total_tokens": 25775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 23458,
        "total_tokens": 25775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal model contains **five** parasitic capacitors\n\n\\[\nC_{GS},\\; C_{GD},\\; C_{DB},\\; C_{GD2},\\; C_{DB2}\n\\]\n\nbut they are not all independent:\n\n1. **\\(C_{GS}, C_{GD}, C_{DB}\\)** form an all-capacitor loop (around the input / drain node of \\(M_1\\)), so one KVL constraint exists.\n2. **\\(C_{GD2}\\)** and **\\(C_{DB2}\\)** are connected to the same node (the upper/drain node of \\(M_2\\)), so they are in parallel – another constraint.\n\nHence the number of independent energy-storage (state) variables is\n\n\\[\n5 \\;-\\; 2 \\;=\\; 3 .\n\\]\n\nThese correspond to the three non-ground nodes in the schematic:\n- the input node (after \\(R_s\\)),\n- the intermediate node (drain of \\(M_1\\)/source of \\(M_2\\)),\n- the output node \\(V_{\\text{out}}\\) (drain of \\(M_2\\)).\n\nSo the transfer function \\(V_{\\text{out}}/V_{\\text{in}}\\) has a **third-order denominator**.\n\n\\[\n\\boxed{3 \\text{ poles}}\n\\]\n\n(typically accompanied by 2 zeros from the feedthrough/capacitive paths).",
        "format": "markdown",
        "sha256": "6cf3578d8c7172d0fc04e49602934234e2fa19d14885fa82bd73800451e229c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, but the answer invents a third node and treats the PMOS load as creating a separate intermediate node. Its three-pole conclusion is based on the wrong topology.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 27076,
        "total_tokens": 29393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2317,
        "output_tokens": 27076,
        "total_tokens": 29393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, this is a **resistor-loaded NMOS common-source (CS) amplifier with a stacked/cascode transistor M₂**.\n\n### 1. Circuit Identification & Topology\n- **M₁**: Input transistor (NMOS). Source grounded, gate driven by $V_{in}$, drain at node $V_X$.\n- **M₂**: Cascode (or series) transistor (NMOS). Source at $V_X$, drain at $V_{out}$, gate biased at a DC voltage $V_b$ (AC ground for small-signal analysis).  \n  *Note: The drawing shows $V_{in}$ routed to the lower transistor gate; for M₂ to act as a cascode with M₁ in saturation, its gate is held at a constant DC bias so that $v_{gs2} \\approx 0$ for AC.*\n- **$R_D$**: Drain load resistor to $V_{DD}$.\n- **Output**: Taken at $V_{out}$ (between $R_D$ and M₂).\n\nThe DC current path is:\n$$V_{DD} \\;\\rightarrow\\; R_D \\;\\rightarrow\\; V_{out} \\;\\rightarrow\\; \\text{M}_2 \\;\\rightarrow\\; V_X \\;\\rightarrow\\; \\text{M}_1 \\;\\rightarrow\\; \\text{GND}$$\n\n---\n\n### 2. DC Operating-Point Analysis\nAssume both devices are in **saturation** (long-channel, $\\lambda \\approx 0$ for simplicity):\n\n**M₁:**\n$$I_D = \\frac{1}{2}k_{n1}(V_{GS1}-V_{th})^2 = \\frac{1}{2}k_{n1}(V_{in}-V_{th})^2$$\n\n**M₂:**\n$$I_D = \\frac{1}{2}k_{n2}(V_{GS2}-V_{th})^2 = \\frac{1}{2}k_{n2}(V_b - V_X - V_{th})^2$$\n\n**Constraints for saturation:**\n- M₁: $V_X \\ge V_{in}-V_{th}$\n- M₂: $V_{out}-V_X \\ge V_b-V_X-V_{th} \\;\\Rightarrow\\; V_{out} \\ge V_b-V_{th}$\n\n**Node voltages:**\n- $V_{out} = V_{DD} - I_D R_D$\n- $V_X$ is set by M₂'s $V_{GS2}$: $V_X = V_b - V_{th} - \\sqrt{2I_D/k_{n2}}$\n\n*Key insight:* The DC current is **primarily controlled by $V_{in}$ through M₁**; M₂ simply passes the same current $I_D$ while providing a voltage drop $V_{out}-V_X$.\n\n---\n\n### 3. Small-Signal Model & Voltage Gain\nUsing the small-signal equivalent ($V_{DD}, V_b$ are AC grounds):\n\n- **M₁:** Transconductance $g_{m1} = \\sqrt{2k_{n1}I_D}$; output resistance $r_{o1}$.\n- **M₂:** Transconductance $g_{m2} = \\sqrt{2k_{n2}I_D}$; output resistance $r_{o2}$.\n\nBecause M₂'s gate is at AC ground:\n$$v_{gs2} = 0 - v_X = -v_X$$\n\nThe small-signal current $i_d$ flows down through both devices (series):\n\n**At node $V_X$:**\n$$i_d = g_{m1}v_{in} + \\frac{v_X}{r_{o1}}$$\nand looking into M₂'s source:\n$$v_X \\approx -\\frac{i_d}{g_{m2}} \\quad (\\text{since } g_{m2}r_{o2} \\gg 1)$$\n\n**Solving:**\nIf $r_{o1}, r_{o2} \\to \\infty$ (ideal), $v_X = -i_d/g_{m2}$, and substituting into M₁'s equation gives:\n$$i_d = g_{m1}v_{in}$$\n\n**At node $V_{out}$ (KCL):**\n$$\\frac{0 - v_{out}}{R_D} = i_d \\;\\Rightarrow\\; v_{out} = -i_d R_D$$\n\nTherefore, the **small-signal voltage gain** is:\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}R_D}$$\n\nThis is the **same gain as a simple single-transistor CS stage** because $R_D$ is a low-impedance resistive load; the cascode M₂ does **not** multiply the gain when $R_D \\ll R_{stack}$.\n\nHowever, M₂ **does** provide a crucial benefit: it raises the **output resistance of the transistor stack** to:\n$$R_{stack} \\approx g_{m2}r_{o2}r_{o1}$$\nwhich matters if $R_D$ is replaced later by an active current-source load.\n\n---\n\n### 4. Input & Output Resistance\n- **Input resistance:** $R_{in} = \\infty$ (MOSFET gate).\n- **Output resistance (looking into transistor stack):** $R_{stack} \\approx g_{m2}r_{o2}r_{o1}$.\n- **Total resistance at $V_{out}$:** $R_{out} = R_D \\parallel R_{stack} \\approx R_D$ (because $R_D$ dominates in this resistively-loaded design).\n\n---\n\n### 5. Summary of Key Results\n| Parameter | Expression |\n|---|---|\n| DC current | $I_D = \\frac{k_{n1}}{2}(V_{in}-V_{th})^2$ |\n| Transconductance | $g_{m1} = \\sqrt{2k_{n1}I_D}$ |\n| Voltage gain | $A_v = -g_{m1}R_D$ |\n| Input resistance | $\\infty$ |\n| Output resistance | $R_D \\parallel (g_{m2}r_{o2}r_{o1})$ |\n\n### Physical Interpretation\n- **M₁** converts $V_{in}$ into a drain-current signal $i_d = g_{m1}v_{in}$.\n- **M₂** acts as a **common-gate (cascode)** device: it shields M₁ from the high-voltage swing at $V_{out}$, boosting the intrinsic output resistance of the pull-down network (useful for active-loaded stages), but because $R_D$ is a resistor, the observed gain is limited by $g_{m1}R_D$.\n- **$R_D$** converts the current $i_d$ into the output voltage $v_{out}$.\n\nIf the figure is interpreted differently (e.g., M₂ gate tied to $V_{in}$ or diode-connected to $V_X$), M₁ would operate in the **triode region** and the gain expression would include the triode conductance $g_{ds1} = k_{n1}(V_{in}-V_{th}-V_X)$; however, the standard cascode analysis above applies to the conventional biasing shown in analog-design textbooks.",
        "format": "markdown",
        "sha256": "7a04cf7d8eab4954717a479cef4a451e4a913a2250313f926c786139eb4b325c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the tied gate drive as a separately biased cascode, assumes both devices are saturated, and gives the cascode output-resistance mechanism. In the figure, M1 is in triode and the series pair behaves approximately like one NMOS with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 26875,
        "total_tokens": 29084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 26875,
        "total_tokens": 29084,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **common-source (CS) amplifier with a stacked-NMOS driver** and a resistive drain load $R_D$.  \nThe two NMOS devices are labeled $M_1$ (lower) and $M_2$ (upper). Their connections are:\n\n* $M_1$: gate = $V_{in}$, source = GND, drain = node $V_X$.\n* $M_2$: gate = $V_{in}$ (tied to the same input node), source = $V_X$, drain = $V_{out}$.\n* $R_D$ connects $V_{DD}$ to $V_{out}$.\n* Both transistor bodies (substrates) are grounded.\n\nBecause $M_2$’s source sits at $V_X > 0$ while its body is at 0 V, **$M_2$ suffers from the body effect**; $M_1$ does not ($V_{SB1}=0$).\n\n---\n\n## 1. DC Operating-Point Analysis\n\nLet $I_D$ be the common branch current (through $R_D$, $M_2$, $M_1$).\n\n### Key DC voltages\n$$\nV_{out} = V_{DD} - I_D R_D \\qquad\nV_{GS1} = V_{in} \\qquad\nV_{GS2} = V_{in} - V_X \\qquad\nV_X = V_{DS1}\n$$\n\n### Threshold voltages\n* $M_1$ (no body effect): $\\displaystyle V_{th1} = V_{th0}$\n* $M_2$ (body effect): $\\displaystyle V_{th2} = V_{th0} + \\gamma\\!\\left(\\sqrt{2\\phi_F + V_{SB2}} - \\sqrt{2\\phi_F}\\right)$\n  with $V_{SB2} = V_X$.\n\n### Saturation currents\nAssuming both devices are in saturation:\n$$\nI_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{GS1}-V_{th1})^2\n     = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS2}-V_{th2})^2\n$$\n\nThese two equations plus $V_X = V_{DS1}$ must be solved simultaneously for $I_D$ and $V_X$ given $V_{in}$.  \nTypically the designer sizes $(W/L)_1$ and $(W/L)_2$ so that $V_X$ is a few hundred millivolts and both devices are comfortably saturated:\n\n$$\n\\boxed{V_{DS1} \\ge V_{GS1}-V_{th1} \\;\\Rightarrow\\; V_X \\ge V_{in}-V_{th1}}\n$$\n$$\n\\boxed{V_{DS2} \\ge V_{GS2}-V_{th2} \\;\\Rightarrow\\; V_{out}-V_X \\ge (V_{in}-V_X)-V_{th2}}\n$$\n\n---\n\n## 2. Small-Signal Model\n\nDefine the usual parameters at the operating point $I_D$:\n\n| Parameter | Expression |\n|---|---|\n| $g_{m1}$ | $\\mu_n C_{ox}(W/L)_1(V_{GS1}-V_{th1}) = 2I_D/(V_{GS1}-V_{th1})$ |\n| $g_{m2}$ | $\\mu_n C_{ox}(W/L)_2(V_{GS2}-V_{th2}) = 2I_D/(V_{GS2}-V_{th2})$ |\n| $g_{mb2}$ | $\\partial I_D/\\partial V_{SB2} = g_{m2}\\,\\gamma/(2\\sqrt{2\\phi_F+V_X})$ |\n| $r_{o1}, r_{o2}$ | $1/(\\lambda I_D)$ |\n\nThe small-signal equivalent (with $V_{DD}$ and $V_{in}$’s DC source grounded) is:\n\n* **$M_1$**: current source $g_{m1}v_{in}$, resistance $r_{o1}$ between $V_X$ and GND.\n* **$M_2$**: current source $g_{m2}(v_{in}-v_X)$, body-effect source $g_{mb2}v_X$, resistance $r_{o2}$ between $V_{out}$ and $V_X$.\n* **Load**: $R_D$ to AC ground.\n\n---\n\n## 3. Small-Signal Gain $A_v = v_{out}/v_{in}$\n\nApply KCL at node $V_{out}$ (open-circuit output terminal):\n\n$$\ni_d = \\frac{v_{out}}{R_D} \\quad \\text{(with sign convention $i_d$ entering the drain)}\n\\quad \\Rightarrow \\quad v_{out} = -i_d R_D\n$$\n\nAt node $V_X$ the series current is the same:\n$$\ni_d = g_{m1}v_{in} + \\frac{v_X}{r_{o1}}\n$$\n\nFor $M_2$:\n$$\ni_d = g_{m2}(v_{in}-v_X) + g_{mb2}v_X + \\frac{v_{out}-v_X}{r_{o2}}\n$$\n\n### Approximation: $r_{o1}, r_{o2} \\to \\infty$ (first-order hand analysis)\n\nWith infinite output resistances:\n$$\ni_d = g_{m1}v_{in}\n$$\n\nSo the **effective transconductance of the stack is simply $g_{m1}$**; $M_2$ adjusts $V_X$ to accommodate this current but does not change $i_d$ because its gate also tracks $v_{in}$.\n\nTherefore:\n$$\n\\boxed{A_v \\approx -g_{m1}R_D}\n$$\n\n### Including finite $r_o$ (more exact)\n\nThe transistor branch behaves like a Norton source $i_d = g_{m1}v_{in}$ in parallel with its own **output resistance looking down from $V_{out}$**:\n\n$$\nR_{stack} \\approx r_{o1}+r_{o2}+(g_{m2}-g_{mb2})r_{o1}r_{o2}\n\\;\\approx\\; (g_{m2}-g_{mb2})r_{o1}r_{o2}\n$$\n\nThus the total load is $R_D \\parallel R_{stack}$, and:\n\n$$\n\\boxed{A_v = -g_{m1}\\,(R_D \\,\\parallel\\, R_{stack})}\n$$\n\nBecause $R_{stack}$ is typically very large (cascode-like), if $R_D$ is a moderate resistor ($\\sim$k$\\Omega$–tens of k$\\Omega$):\n\n$$\n\\boxed{A_v \\approx -g_{m1}R_D}\n$$\n\n---\n\n## 4. Role of $M_2$ and Body Effect\n\n| Feature | Consequence |\n|---|---|\n| **Series stacking** | $M_2$ raises the output resistance of the driver branch to $\\sim (g_{m2}-g_{mb2})r_{o1}r_{o2}$. This is useful if $R_D$ is replaced later by an active (high-impedance) load. |\n| **Gate tied to $v_{in}$** | The small-signal current is controlled primarily by $M_1$: $g_{m,eff}\\approx g_{m1}$. $M_2$’s $v_{gs}$ becomes $v_{in}-v_X$, automatically adjusting as $I_D$ changes. |\n| **Body effect on $M_2$** | $V_{th2} > V_{th0}$. It reduces $g_{m2}$ for a given current and lowers $R_{stack}$ slightly because $g_{mb2}$ subtracts from the cascode boosting term $(g_{m2}-g_{mb2})$. |\n| **Node $V_X$** | $V_X = V_{DS1}$ is set by the current equation involving $V_{th2}(V_X)$. It is usually designed to keep both devices saturated. |\n\n---\n\n## 5. Summary of Key Results\n\n| Quantity | Result / Expression |\n|---|---|\n| **Topology** | CS amplifier; stacked-NMOS driver ($M_1$ + $M_2$) with resistive load $R_D$. |\n| **DC current** | Solve $I_D = \\frac{1}{2}k'_n(W/L)_1(V_{in}-V_{th0})^2 = \\frac{1}{2}k'_n(W/L)_2(V_{in}-V_X-V_{th2})^2$ with $V_{th2}(V_X)$. |\n| **Body effect** | Present only on $M_2$: $V_{th2} = V_{th0}+\\gamma(\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F})$. |\n| **Small-signal gain** | $\\displaystyle A_v \\approx -g_{m1}R_D$ (when $R_D \\ll R_{stack}$). |\n| **Stack output resistance** | $\\displaystyle R_{stack} \\approx (g_{m2}-g_{mb2})r_{o1}r_{o2}$. |\n| **Saturation reqs.** | $V_X \\ge V_{in}-V_{th1}$ and $V_{out} \\ge V_{in}-V_{th2}$. |\n\nIn short, **the circuit behaves as a common-source stage whose effective transconductance is $g_{m1}$ and whose gain is $-g_{m1}R_D$**, while the upper transistor $M_2$ provides a high-output-resistance “cascode-like” stack that becomes fully advantageous only if the load is changed from $R_D$ to a high-impedance current source. The body effect on $M_2$ must be included when computing the DC bias point and the exact value of $R_{stack}$.",
        "format": "markdown",
        "sha256": "a31648d393b3a8920a46317e9ffe7e12a3f21ffbeab39902d4ce5a08738e707d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate drive and resistive load, but incorrectly treats both NMOS devices as saturated and analyzes the stack as a cascode. The lower device is in triode; the key result is an approximately longer effective channel, which the answer misses.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 26552,
        "total_tokens": 28761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 26552,
        "total_tokens": 28761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Interpretation of the schematic**\n\nFrom the drawing the circuit consists of:\n\n* a DC supply **VDD** and a drain resistor **RD**,\n* an output node **Vout** (taken at the lower terminal of RD),\n* two **NMOS** transistors **M₁** and **M₂** stacked in series between **Vout** and ground:\n  * **M₁**: source = GND, drain = node **X**, gate = **Vin**\n  * **M₂**: source = node **X**, drain = **Vout**, gate = **Vin**\n* the two gates are tied to the common small‑signal / DC input **Vin** (the black dot).\n\nSo the signal path is: **Vin** controls both devices; the current flows down through **M₂** and **M₁** to ground; **RD** converts that current into a voltage at **Vout**.\n\nBelow is a complete analysis: DC operating point, small‑signal model, voltage gain, output resistance and large‑signal behaviour.\n\n---\n\n## 1. DC analysis (bias point)\n\nDefine the DC node voltages:\n\n* **V_GS1 = V_IN** (source of M₁ is ground)\n* **V_GS2 = V_IN – V_X** (source of M₂ is node X)\n* **V_DS1 = V_X**\n* **V_DS2 = V_out – V_X**\n\nBoth devices carry the same current **I_D** (series connection).  \nUsing the long‑channel saturation model (λ = 0 for simplicity; the extension to λ ≠ 0 is straightforward):\n\n\\[\nI_D = \\frac{k_{n1}}{2}\\bigl(V_{IN}-V_{th}\\bigr)^2\n      = \\frac{k_{n2}}{2}\\bigl(V_{IN}-V_X-V_{th}\\bigr)^2\n\\tag{1}\n\\]\n\nwhere \\(k_n=\\mu_nC_{ox}(W/L)\\).\n\nThe output node is set by Ohm’s law:\n\n\\[\nV_{out}=V_{DD}-I_D R_D \\tag{2}\n\\]\n\n### Saturation conditions\n\n\\[\n\\begin{aligned}\n\\text{M}_1:&\\quad V_{DS1}\\ge V_{GS1}-V_{th}\n            \\;\\Rightarrow\\; V_X \\ge V_{IN}-V_{th} \\\\[2pt]\n\\text{M}_2:&\\quad V_{DS2}\\ge V_{GS2}-V_{th}\n            \\;\\Rightarrow\\; V_{out}\\ge V_{IN}-V_{th}\n\\end{aligned}\n\\tag{3}\n\\]\n\n### Solving for the bias point\n\nFrom (1) the overdrive voltages are\n\n\\[\nV_{OV1}=\\sqrt{2I_D/k_{n1}},\\qquad\nV_{OV2}=\\sqrt{2I_D/k_{n2}} .\n\\]\n\nHence\n\n\\[\nV_{IN}-V_X = V_{th}+V_{OV2}\n\\quad\\Longrightarrow\\quad\nV_X = V_{IN}-V_{th}-V_{OV2}. \\tag{4}\n\\]\n\nSubstituting (4) into (1) and using (2) gives a single nonlinear equation for **I_D** (or for **V_IN**).  \nIn practice one chooses the transistor sizes so that **V_X** is a few hundred mV above ground; this requires **k_n2 > k_n1** (M₂ is wider / longer so that its overdrive is smaller).\n\n**Key DC facts**\n\n* If **V_IN < V_th**: both devices are off, **I_D = 0**, **V_out = V_DD**.\n* As **V_IN** rises, **M₁** turns on first; current flows and **V_out** drops.\n* When **V_IN** is high enough that **M₁** enters triode, **V_out** collapses to a small value (determined by the on‑resistance of the stack).\n\n---\n\n## 2. Small‑signal model\n\nDraw the linear equivalent around the Q‑point:\n\n* **g_m1 , g_m2** – transconductances:\n  \\[\n  g_{m1}=k_{n1}(V_{GS1}-V_{th}),\\qquad\n  g_{m2}=k_{n2}(V_{GS2}-V_{th})\n  \\]\n* **r_o1 , r_o2** – output resistances (\\(r_o=1/\\lambda I_D\\)).\n* **RD** to AC ground.\n\nBecause both gates are driven by the same **v_in**, the controlling voltages are\n\n\\[\nv_{gs1}=v_{in},\\qquad v_{gs2}=v_{in}-v_x .\n\\]\n\nThe small‑signal schematic is:\n\n```\n        RD\nVout o---[==]---o GND\n      |\n      |  g_m2·v_gs2\n      ↓\n    (D2)---r_o2---(S2)=X\n      |\n      |  g_m1·v_in\n      ↓\n    (D1)---r_o1---GND\n```\n\n---\n\n## 3. Small‑signal gain (low frequency)\n\nApply KCL at the two unknown nodes **v_out** and **v_x**.\n\n### Node X (intermediate node)\n\nCurrent leaving X through **M₁** branch = \\(g_{m1}v_{in}+v_x/r_{o1}\\).  \nCurrent entering X from **M₂** branch = \\(g_{m2}(v_{in}-v_x)\\).\n\nWith \\(r_o\\)’s neglected for simplicity (\\(r_o\\gg 1/g_m\\)):\n\n\\[\ng_{m1}v_{in}=g_{m2}(v_{in}-v_x)\n\\;\\Longrightarrow\\;\nv_x = \\left(1-\\frac{g_{m1}}{g_{m2}}\\right)v_{in}. \\tag{5}\n\\]\n\n*If the devices are sized so that **g_m1 = g_m2**, then **v_x = 0** (AC ground).*  \nThis is extremely useful: the drain of **M₁** does **not** move in AC, so the Miller multiplication of **C_gd1** is eliminated.\n\n### Node Vout\n\nCurrent through RD: \\(v_{out}/R_D\\).  \nCurrent sunk by **M₂**: the same \\(g_{m1}v_{in}\\) (from Eq. 5).\n\n\\[\n\\frac{v_{out}}{R_D}+g_{m1}v_{in}=0\n\\;\\Longrightarrow\\;\n\\boxed{A_v \\equiv \\frac{v_{out}}{v_{in}}\\approx -g_{m1}R_D}. \\tag{6}\n\\]\n\nThe **upper transistor M₂ does not reduce the intrinsic gain** when the load is a resistor; it simply “passes” the current generated by **M₁**.\n\n### More exact expression (including r_o)\n\nIf \\(r_o\\) is retained, solving the 2×2 system gives\n\n\\[\n\\boxed{\nA_v=-\\frac{R_D\\bigl[g_{m1}r_{o1}+g_{m2}r_{o2}+g_{m1}g_{m2}r_{o1}r_{o2}\\bigr]}\n            {R_D+r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}}\n}\n\\tag{7}\n\\]\n\nBecause \\(g_{m}r_o\\gg 1\\), (7) reduces to (6).\n\n---\n\n## 4. Output resistance\n\nTurn off the independent source (**v_in = 0**). Both gates become AC ground, so **M₂** acts as a common‑gate stage on top of **M₁** (common‑source).\n\nThe resistance looking down into the drain of **M₂** is the classic **cascode** value:\n\n\\[\nR_{\\text{stack}} \\approx r_{o2}+r_{o1}(1+g_{m2}r_{o2})\n          \\approx g_{m2}r_{o2}r_{o1}. \\tag{8}\n\\]\n\nThe total resistance at **Vout** is therefore\n\n\\[\n\\boxed{R_{out}=R_D \\parallel R_{\\text{stack}}\n      \\approx R_D \\quad (\\text{since }R_{\\text{stack}}\\gg R_D).}\n\\tag{9}\n\\]\n\n---\n\n## 5. Large‑signal / transfer characteristic\n\n| Region of **V_IN** | State of M₁, M₂ | **V_out** |\n|---|---|---|\n| **V_IN < V_th** | Both off | **V_DD** |\n| **V_th < V_IN < V_IN,sat** | M₁ in sat, M₂ in sat (or triode) | Drops as \\(I_D\\) rises; follows (2) |\n| **V_IN high** | M₁ enters triode; M₂ still on | Approaches small value \\(\\approx I_D R_{on}\\) |\n\nThe transfer curve is a **common‑source inverting amplifier** with a finite output swing limited by \\(R_D\\).\n\n---\n\n## 6. What does M₂ actually do?\n\nEven though the low‑frequency gain is set by **g_m1 R_D**, the series transistor **M₂** provides two important benefits:\n\n1. **Miller effect suppression** – From (5), if **g_m1 ≈ g_m2**, the drain of **M₁** (node X) is at AC ground (\\(v_x=0\\)). Therefore the voltage across **C_gd1** is just \\(v_{in}\\), not \\((1+|A_v|)v_{in}\\). The high‑frequency bandwidth is much larger than in a single‑transistor CS stage with the same gain.\n\n2. **High output impedance** – The stack resistance (8) is \\(\\sim g_m r_o^2\\). If **RD** is replaced later by a current source (active load), the gain becomes \\(-g_{m1}R_{\\text{stack}}\\), i.e. a very high‑gain **cascode** amplifier.\n\n---\n\n## 7. Summary of key results\n\n| Quantity | Expression / Value |\n|---|---|\n| DC current | Solve (1)–(2) |\n| Saturation bias | Requires \\(V_X\\ge V_{OV1}\\), \\(V_{out}\\ge V_{OV2}\\) |\n| Small‑signal gain | \\(A_v \\approx -g_{m1}R_D\\) |\n| Node X (AC) | \\(v_x=(1-g_{m1}/g_{m2})v_{in}\\) (≈ 0 if matched) |\n| Output resistance | \\(R_{out}\\approx R_D\\parallel (g_{m2}r_{o2}r_{o1})\\approx R_D\\) |\n| Transconductance of stack | \\(G_m = g_{m1}\\) |\n\n---\n\n### Bottom line\n\nThe circuit is a **resistively loaded common‑source stage (M₁)** with a **series “cascode” transistor (M₂)** whose gate is also driven by **Vin**. It behaves like a single common‑source amplifier with gain \\(-g_{m1}R_D\\), but because **M₂** holds node **X** near AC ground, it eliminates the Miller multiplication of **M₁**’s gate‑drain capacitance—making it a very useful topology for high‑speed analog design. If **RD** is replaced by an active current source, the same stack gives a high‑gain cascode amplifier.",
        "format": "markdown",
        "sha256": "0dfae4346ce77be772c16c4554871f889e2e7173f6b4b0d5c3db972f6edc4169"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer recognizes the series NMOS topology but analyzes it as a true cascode, assumes both devices are saturated, and claims cascode-level output resistance and Miller suppression. It misses the essential result: the lower device operates in triode and the pair behaves approximately like one NMOS with effective channel length L1 + L2.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 30912,
        "total_tokens": 33121,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 30912,
        "total_tokens": 33121,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, the circuit is a **source‑coupled MOSFET pair (a differential‑style topology)** with the following key parts:\n\n| Component | Role |\n|-----------|------|\n| **M₁, M₂** | Two n‑channel MOSFETs (the arrow on each transistor marks the **source**; both sources are tied to the common node **A**) |\n| **I₁** | Ideal DC tail current source (infinite small‑signal impedance) |\n| **R_D** | Drain load resistor |\n| **V_DD** | Supply rail |\n| **V_in** | Small‑signal input (plus a DC bias) applied to M₁’s gate |\n| **V_b** | DC bias voltage on M₂’s gate |\n| **V_out** | Single‑ended output taken at M₂’s drain |\n\nBecause M₁’s drain is connected **directly** to V_DD (no load resistor), it does not contribute a voltage signal at its drain; it only “steers” current away from M₂.  M₂ is the “output” branch.\n\n---\n\n## 1. DC Operating Point\n\nAssume both transistors are in **saturation** (active region):\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nWith the standard long‑channel model (ignoring channel‑length modulation for simplicity):\n\n\\[\nI_{D1}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{GS1}-V_{th})^2\n\\]\n\\[\nI_{D2}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS2}-V_{th})^2\n\\]\n\nwhere\n\n\\[\nV_{GS1}=V_{in,DC}-V_A,\\qquad V_{GS2}=V_b-V_A\n\\]\n\n**Node A voltage** is found by solving the two equations above together with \\(I_{D1}+I_{D2}=I_1\\).\n\nThe DC output voltage is then set by the current through M₂:\n\n\\[\n\\boxed{V_{out,DC}=V_{DD}-I_{D2}R_D}\n\\]\n\n* **V_b** sets the DC current through M₂ (and therefore the quiescent level of V_out).\n* **V_in,DC** adjusts how much of the tail current I₁ is steered into M₁ versus M₂.\n\n---\n\n## 2. Small‑Signal Analysis\n\nFor AC signals:\n* **V_DD** and **V_b** are AC grounds.\n* **I₁** is an open circuit (infinite impedance).\n\nSo the small‑signal model at node A is:\n\n* **M₁**: common‑drain (source‑follower) configuration because its drain is at AC ground.\n* **M₂**: common‑gate configuration because its gate is at AC ground and the input is at its source (node A).\n\nUsing the small‑signal parameters \\(g_{m1}, g_{m2}\\) (and neglecting \\(r_o\\) for clarity):\n\n\\[\ni_{d1}=g_{m1}(v_{in}-v_a),\\qquad i_{d2}=-g_{m2}v_a\n\\]\n\nKCL at node A (no current can flow through I₁):\n\n\\[\ni_{d1}+i_{d2}=0\n\\;\\Rightarrow\\;\ng_{m1}(v_{in}-v_a)-g_{m2}v_a=0\n\\]\n\nSolving for the common‑source node voltage \\(v_a\\):\n\n\\[\n\\boxed{v_a=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}}\n\\]\n\nKCL at V_out (through R_D to AC ground):\n\n\\[\nv_{out}=-i_{d2}R_D=g_{m2}R_D\\,v_a\n\\]\n\nSubstituting \\(v_a\\):\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}}\n\\]\n\n### Special case: matched devices (\\(g_{m1}=g_{m2}=g_m\\))\n\n\\[\n\\boxed{A_v=\\frac{g_m R_D}{2}}\n\\]\n\nThis is exactly **half** the gain of a simple common‑source stage (\\(A_v=-g_mR_D\\)) because the fixed tail current I₁ forces the two transistors to “fight” for current: a positive \\(v_{in}\\) increases \\(I_{D1}\\) and decreases \\(I_{D2}\\) by the same amount.\n\n---\n\n## 3. Input / Output Resistances\n\n* **Input resistance:** \\(R_{in}=\\infty\\) (gate of M₁).\n* **Output resistance:** Looking into V_out, M₂’s drain is loaded by R_D.  With \\(r_o\\) neglected, \\(R_{out}\\approx R_D\\).  (If \\(r_{o2}\\) is included, \\(R_{out}\\approx R_D\\parallel r_{o2}\\) because node A is bootstrapped by the common‑gate action.)\n\n---\n\n## 4. Physical Interpretation & Design Notes\n\n1. **Current steering:** The circuit behaves like the **right half** of a differential pair.  The “other half” (M₁) has no drain resistor, so its current change does not appear at any output; only the **change in M₂’s current** matters.\n2. **Role of V_b:** It sets the DC operating point of M₂.  For maximum symmetrical swing, choose \\(V_b\\) so that \\(I_{D2}\\approx I_1/2\\) when \\(V_{in,DC}\\) is at its nominal bias.\n3. **Gain vs. bandwidth trade‑off:** Because M₂ operates in common‑gate mode, it presents a low input resistance (\\(\\approx 1/g_{m2}\\)) to node A.  This lowers the gain compared to a full common‑source stage but also reduces the time constant at node A, which can improve bandwidth.\n4. **If M₁ were diode‑connected** (gate tied to drain/V_DD), the topology would change to a current‑mirror load; here, however, V_in is an independent control terminal.\n\n---\n\n### Summary Equation (most useful form)\n\nFor identical NMOS devices biased in saturation:\n\n\\[\n\\boxed{A_v=\\frac{g_m R_D}{2}=\\frac{\\mu_n C_{ox}(W/L)}{2(V_{GS}-V_{th})}\\,R_D}\n\\]\n\nwith the constraint \\(I_{D1}+I_{D2}=I_1\\) and \\(V_{out,DC}=V_{DD}-I_{D2}R_D\\).\n\nIf you need the analysis with **finite output resistances \\(r_{o1}, r_{o2}\\)**, the gain becomes\n\n\\[\nA_v \\approx \\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}+g_{m1}g_{m2}/g_o}\n\\]\n\n(where \\(g_o=1/r_o\\)), but for most hand analyses the expression above is sufficient.",
        "format": "markdown",
        "sha256": "deb06377ae4fc27dec0554bea6a9a731fb45d8a0644dd666c0e23b9e077c6a69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M₂ biased at V_b and output at its drain. The derived gain is non-inverting and matches the ideal small-signal result.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 25598,
        "total_tokens": 27651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21547,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 25598,
        "total_tokens": 27651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21547,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **single-ended current-steering differential pair** (also viewed as a **common-drain / common-gate cascade**).  \nIt consists of two MOSFETs ($M_1$, $M_2$) with common source node $S$, a DC tail current source $I_1$, a drain load resistor $R_D$, and DC/reference voltages $V_{in}$ and $V_b$.\n\nBelow is a step-by-step analysis.\n\n---\n\n### 1. Circuit Identification & Assumptions\n| Component | Role |\n|---|---|\n| $M_1$, $M_2$ | NMOS transistors (assumed identical geometry $W/L$, but can be scaled). $M_1$ drain $\\to V_{DD}$; $M_2$ drain $\\to V_{out}$. Both sources $\\to S$. |\n| $I_1$ | Ideal DC current source (infinite output impedance for AC). It fixes $I_{D1}+I_{D2}=I_1$. |\n| $R_D$ | Load resistor for the output branch ($M_2$). |\n| $V_{in}$ | Signal input (small-signal $v_{in}$ superimposed on DC). |\n| $V_b$ | DC bias for $M_2$ (AC ground, $v_b=0$). |\n\nBoth transistors operate in **saturation** (long-channel square-law or general $g_m$ model).\n\n---\n\n### 2. DC Operating Point\n\n**KCL at node $S$:**\n$$I_{D1} + I_{D2} = I_1$$\n\n**Node voltages:**\n- $V_{GS1} = V_{in} - V_S$\n- $V_{GS2} = V_b - V_S$\n- $V_{out} = V_{DD} - I_{D2}R_D$\n\n**Square-law (if $V_{GS} > V_{th}$ and saturation):**\n$$I_{D1} = \\frac{k_1}{2}(V_{GS1}-V_{th})^2, \\quad I_{D2} = \\frac{k_2}{2}(V_{GS2}-V_{th})^2$$\nwhere $k = \\mu_n C_{ox}(W/L)$.\n\n**Solution procedure:**\n1. Eliminate $V_S$ using $V_{GS1}$ and $V_{GS2}$:\n   $$\\sqrt{I_{D1}/k_1} + V_{th} = V_{in} - V_S$$\n   $$\\sqrt{I_{D2}/k_2} + V_{th} = V_b - V_S$$\n2. Substitute $I_{D2}=I_1-I_{D1}$ and solve the resulting quadratic for $I_{D1}$.\n3. Once $I_{D1}$ and $I_{D2}$ are known:\n   $$V_S = V_{in} - V_{GS1}, \\quad V_{out} = V_{DD} - I_{D2}R_D$$\n\n**Balanced case ($V_{in}=V_b$, $k_1=k_2$):**\n$$I_{D1}=I_{D2}=\\frac{I_1}{2}, \\quad V_{out} = V_{DD} - \\frac{I_1}{2}R_D, \\quad V_S = V_{in} - V_{GS}$$\n\n---\n\n### 3. Small-Signal Analysis ($v_{in}$ small, $v_b=0$, $I_1$ open for AC)\n\n**Transconductances:**\n$$g_{m1} = \\frac{\\partial I_{D1}}{\\partial V_{GS1}}, \\quad g_{m2} = \\frac{\\partial I_{D2}}{\\partial V_{GS2}}$$\n\n**KCL at common source $S$ (no AC current through $I_1$):**\n$$g_{m1}(v_{in}-v_s) + g_{m2}(-v_s) = 0$$\n$$\\Rightarrow \\boxed{v_s = \\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}}$$\n\n**At $V_{out}$ node:**\nThe drain current of $M_2$ is $i_{d2} = g_{m2}v_{gs2} = -g_{m2}v_s$.\nSince $R_D$ connects to AC ground ($V_{DD}$):\n$$v_{out} = -i_{d2}R_D = g_{m2}R_D\\,v_s$$\n\n**Voltage Gain:**\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}}$$\n\n**Special cases:**\n- **Matched devices** ($g_{m1}=g_{m2}=g_m$): $\\displaystyle A_v = \\frac{g_m R_D}{2}$\n- **$g_{m1} \\gg g_{m2}$** (strong $M_1$): $\\displaystyle A_v \\approx g_{m2}R_D$ (maximum gain, $v_s \\approx v_{in}$)\n- **$g_{m2} \\gg g_{m1}$**: $\\displaystyle A_v \\approx g_{m1}R_D$\n\n**Physical interpretation:**\n- $M_1$ acts as a **source follower** (common-drain) converting $v_{in} \\to v_s$.\n- $M_2$ acts as a **common-gate** stage; its source is driven by $v_s$, gate is AC ground, and output is at drain.\n- The current $I_1$ is **steered** between $M_1$ and $M_2$ by $v_{in}$. When $v_{in}$ rises, $I_{D1}$ increases, $V_S$ rises, $V_{GS2}$ falls $\\Rightarrow I_{D2}$ falls $\\Rightarrow v_{out}$ rises. Hence **gain is positive (non-inverting)**.\n\n---\n\n### 4. Input & Output Impedances\n\n**Input resistance (at $V_{in}$):**\n$$R_{in} = \\infty \\quad (\\text{gate of } M_1)$$\n\n**Output resistance (looking into $V_{out}$):**\nIf transistor output resistances $r_o$ are included:\n- Resistance at $S$ looking into $M_1$ is $\\approx 1/g_{m1}$.\n- $M_2$ is common-gate with source resistance $R_S \\approx 1/g_{m1}$, so its intrinsic output resistance is boosted:\n  $$R_{o2,eff} \\approx r_{o2}\\left(1+\\frac{g_{m2}}{g_{m1}}\\right)$$\n- Total:\n  $$\\boxed{R_{out} = R_D \\parallel R_{o2,eff} \\approx R_D \\quad (\\text{if } r_o \\gg R_D)}$$\n\n---\n\n### 5. Key Design Observations\n\n| Feature | Comment |\n|---|---|\n| **Gain** | Set by $R_D$ and the **parallel** combination of $g_{m1}, g_{m2}$: $A_v = (g_{m1}\\parallel g_{m2})\\,g_{m2}R_D/g_{m2}$? No—simply $\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}$. To maximize, make $g_{m1}$ large (wide $M_1$) so $v_s$ tracks $v_{in}$. |\n| **Linearity / Swing** | $V_{out}$ moves opposite to $I_{D2}$. Large $I_1$ gives high $g_m$ but limits headroom: $V_{out,min} = V_{DD} - I_1 R_D > V_{GS2}-V_{th}$ (saturation). |\n| **Noise / CMRR** | Because $M_1$ drain is tied directly to $V_{DD}$ (no load), common-mode signals do **not** create a differential voltage at $M_1$'s drain; however, the circuit is still a single-ended differential pair. For better CMRR, a symmetrical load on $M_1$ (i.e., a second $R_D$) is usually added to make a fully differential amplifier. |\n| **Biasing** | $V_b$ sets the quiescent $I_{D2}$; $V_{in}$ DC level sets $I_{D1}$. The two branches are coupled through $V_S$. |\n\n---\n\n### 6. Alternative View: Two-Stage Cascade\nYou can also decompose the circuit as:\n1. **$M_1$**: Common-drain (source follower) with load $R_{in,CG} \\approx 1/g_{m2}$.\n2. **$M_2$**: Common-gate amplifier with load $R_D$.\n\nThe overall gain is the product:\n$$A_v = \\underbrace{\\left(\\frac{g_{m1}}{g_{m1}+g_{m2}}\\right)}_{v_s/v_{in}} \\times \\underbrace{(g_{m2}R_D)}_{v_{out}/v_s}$$\n\n---\n\n### Summary\nThis is a **current-steering, non-inverting amplifier**. The DC point is found by splitting $I_1$ between $M_1$ and $M_2$ via $V_{GS1}$ and $V_{GS2}$. The small-signal gain is\n$$\\boxed{A_v = \\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}}$$\nwith high input impedance ($\\infty$) and output resistance $\\approx R_D$ (or boosted by the common-gate $M_2$ if $r_o$ is considered).\n\nIf you need a specific result—such as the **DC solution for $V_S$ with given $V_{in}, V_b$**, the **maximum output swing**, or a **complete numerical example**—let me know the transistor parameters ($k$, $V_{th}$, $I_1$, $R_D$, $V_{DD}$) and I can compute the exact operating point.",
        "format": "markdown",
        "sha256": "da19d5df12d57385ef6bc2a6067beac5aec2bb9f9f87e71222585d7dbc600d98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the shared-source pair as a source-follower/common-gate cascade (also a single-ended differential pair), and gives the correct non-inverting gain. Secondary impedance and design-detail issues do not affect the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 27390,
        "total_tokens": 29443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 27390,
        "total_tokens": 29443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18874,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **single‑ended, source‑coupled (differential‑pair‑style) common‑source stage**.  \nBelow is a systematic analysis: component identification, DC operating point, small‑signal (AC) behavior, and design constraints.\n\n---\n\n## 1. Circuit Identification\n\n| Component | Connection / Role |\n|-----------|-----------------|\n| **M₁, M₂** | NMOS transistors (sources joined at node **S**; arrows indicate the source terminals are at **S**). |\n| **I₁** | Ideal DC current sink: fixes the total current in the shared source node: $I_{D1}+I_{D2}=I_1$. |\n| **R_D** | Drain load resistor for M₂; converts M₂’s drain current into an output voltage. |\n| **M₁ drain** | Tied directly to $V_{DD}$ (i.e. **zero resistance load** on that side). |\n| **V_in** | Small‑signal / DC input applied to the gate of M₁. |\n| **V_b** | DC bias voltage on M₂’s gate ($v_b=0$ for AC). |\n| **V_out** | Taken at the drain of M₂ ($V_{out}=V_{DD}-I_{D2}R_D$). |\n\nBecause $V_{DD}$ and $I_1$ are constant DC sources, they are **AC grounds**.\n\n---\n\n## 2. DC Operating Point\n\nLet $V_S$ be the common source node voltage.\n\n### Currents (saturation assumed)\nFor M₁ and M₂ with threshold $V_{th}$, mobility $\\mu_n$, oxide capacitance $C_{ox}$, and aspect ratios $(W/L)_1$, $(W/L)_2$:\n\n$$\nI_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{in}-V_S-V_{th})^2\n$$\n\n$$\nI_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b-V_S-V_{th})^2\n$$\n\n### KCL at node S\n$$\nI_{D1}+I_{D2}=I_1 \\quad\\Longrightarrow\\quad \\text{solve for }V_S.\n$$\n\nOnce $V_S$ is known:\n- $I_{D1}$ and $I_{D2}$ are fixed.\n- **Output DC voltage:**\n  $$\n  \\boxed{V_{out}=V_{DD}-I_{D2}R_D}\n  $$\n\n### Special symmetric case\nIf $(W/L)_1=(W/L)_2$ and $V_{in}=V_b$ (balanced bias), then\n$$\nI_{D1}=I_{D2}=\\frac{I_1}{2}, \\qquad\nV_S = V_{in}-V_{th}-\\sqrt{\\frac{I_1}{\\mu_n C_{ox}(W/L)}}.\n$$\n\n---\n\n## 3. Small‑Signal (AC) Analysis\n\nSet DC sources to ground ($V_{DD}\\to 0$, $I_1\\to \\text{open}$).  \nUse the long‑channel model with transconductances\n$$\ng_{m1}=\\frac{2I_{D1}}{V_{GS1}-V_{th}}, \\qquad\ng_{m2}=\\frac{2I_{D2}}{V_{GS2}-V_{th}},\n$$\nand neglect channel‑length modulation ($r_o\\to\\infty$) for simplicity.\n\n### Node voltages\n- $v_{gs1}=v_{in}-v_s$\n- $v_{gs2}=-v_s$  (because $V_b$ is AC ground)\n\n### KCL at common source node S\nThe two current sources inject current into $S$:\n$$\ng_{m1}v_{gs1}+g_{m2}v_{gs2}=0\n\\;\\Longrightarrow\\;\ng_{m1}(v_{in}-v_s)-g_{m2}v_s=0.\n$$\n\nSolve for the small‑signal source voltage $v_s$:\n$$\n\\boxed{v_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}}\n$$\n\n### KCL at output node $v_{out}$\nOnly $R_D$ and M₂ drain are connected:\n$$\n\\frac{v_{out}}{R_D}+g_{m2}v_{gs2}=0\n\\;\\Longrightarrow\\;\nv_{out}=-g_{m2}(-v_s)R_D=g_{m2}v_sR_D.\n$$\n\nSubstitute $v_s$:\n$$\n\\boxed{v_{out}=\\left[\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\right]R_D\\,v_{in}}\n$$\n\n### Voltage Gain\n$$\n\\boxed{A_v \\equiv \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D}\n$$\n\n- **Sign:** Positive (non‑inverting).  \n  A rise in $v_{in}$ $\\Rightarrow$ larger $I_{D1}$ $\\Rightarrow$ less current available for $I_{D2}$ (because $I_1$ is fixed) $\\Rightarrow$ $V_{out}$ rises toward $V_{DD}$.\n\n- **Matched case** ($g_{m1}=g_{m2}=g_m$, i.e. $I_{D1}=I_{D2}=I_1/2$):\n  $$\n  A_v = \\frac{g_m}{2}R_D.\n  $$\n\nThe term $\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}$ is the **parallel combination** of the two transconductances; it acts as an effective $G_m$ from $v_{in}$ to the drain current of M₂.\n\n---\n\n## 4. Input / Output Resistance\n\n| Port | Resistance | Comment |\n|------|------------|---------|\n| **Input ($v_{in}$)** | $R_{in}=\\infty$ | MOS gate is insulated; no DC current flows into $v_{in}$. |\n| **Output ($v_{out}$)** | $R_{out}=R_D \\,\\parallel\\, r_{o2}$ | With $r_o\\to\\infty$, $R_{out}=R_D$. (If $r_o$ is finite, M₂’s drain sees a source degeneration resistance $\\approx 1/g_{m1}$ at node $S$, so $r_{o2}$ is boosted slightly; the dominant load remains $R_D$.) |\n\n---\n\n## 5. Operating Constraints (Saturation Region)\n\nFor both transistors to remain in saturation:\n\n**M₁:**\n$$\nV_{DS1}\\ge V_{GS1}-V_{th}\n\\;\\Rightarrow\\;\nV_{DD}-V_S \\ge (V_{in}-V_S)-V_{th}\n\\;\\Rightarrow\\;\nV_{DD} \\ge V_{in}-V_{th}.\n$$\nUsually automatically satisfied because $V_{DD}$ is the highest rail.\n\n**M₂:**\n$$\nV_{DS2}\\ge V_{GS2}-V_{th}\n\\;\\Rightarrow\\;\nV_{out}-V_S \\ge (V_b-V_S)-V_{th}\n\\;\\Rightarrow\\;\n\\boxed{V_{out} \\ge V_b - V_{th}}.\n$$\nThis is the **critical headroom constraint**: $V_{out}$ must stay above $V_b-V_{th}$; otherwise M₂ enters triode and gain collapses.\n\n**Tail current source $I_1$:**  \nRequires $V_S > V_{SS}+V_{DS,\\min}$ (if $I_1$ is implemented with a transistor; for the ideal symbol shown, only $V_S>0$ is needed).\n\n---\n\n## 6. Physical Interpretation / “Why It Works”\n\n- **M₁** does not provide voltage gain at its own drain (that drain is AC ground). Instead, it acts as a **voltage‑controlled current source** that “steers” part of the fixed tail current $I_1$.\n- Because $I_{D1}+I_{D2}=I_1$ is enforced by the ideal sink, any increase in $I_{D1}$ forces a **decrease** in $I_{D2}$.\n- M₂ translates that current change into a voltage change across $R_D$.\n- The two devices form a **current divider** at node $S$; the effective transconductance is the “parallel” of $g_{m1}$ and $g_{m2}$.\n\n---\n\n## 7. Quick Design Takeaways\n\n1. **Gain is set by $R_D$ and the transistor $g_m$’s.** If you want higher gain, increase $R_D$ (at the expense of output swing) or increase $g_{m1},g_{m2}$ (by raising $W/L$ or $I_1$).\n2. **Input is high impedance** ($R_{in}=\\infty$), so this stage can be cascaded easily.\n3. **Single‑ended output** means you lose the common‑mode rejection of a full differential pair, but you save one load resistor and one output node.\n4. **Non‑inverting** behavior is useful for feedback loops where you need a positive gain stage.\n\nIf you need a specific numeric result (e.g. for given $I_1$, $R_D$, $\\mu_n C_{ox}$, $W/L$, and $V_b$), simply insert those values into the DC equations above to find $V_S$, then compute $g_{m1},g_{m2}$ and $A_v$.",
        "format": "markdown",
        "sha256": "553fb41dbb2e936eed4b1ef37039c8f3221e73c65fca58dc771bebf7fb7a5f1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the source-coupled pair with M2 biased at Vb and output at M2’s drain, and derives the correct non-inverting gain. The loose “common-source” label does not undermine the otherwise correct essential analysis.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 28170,
        "total_tokens": 30223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22830,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2053,
        "output_tokens": 28170,
        "total_tokens": 30223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22830,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **source‑follower (common‑drain) stage** plus an active load:\n\n* **M₁**: NMOS (or PMOS, depending on the technology) with its **drain** tied to AC ground (VDD), its **source** at the output node Vₒᵤₜ, and its **gate** driven through the series resistor **Rₛ**.\n* **M₂**: NMOS current‑sink; its gate is DC‑biased by Vb, so for small‑signal analysis it is simply an output resistance **rₒ₂** from Vₒᵤₜ to ground.\n* **Rₛ**: The resistance of the driving stage (e.g. the error amplifier output resistance in an LDO).\n\nThe only capacitance that feeds the **output signal back to the internal gate** of M₁ is **Cgs₁** (gate‑to‑source of M₁). Cgd₁ goes to AC ground (VDD) and only loads the gate node; Cdb’s go to ground and do not create feedback.\n\n---\n\n### 1.  Small‑signal model (AC)\n\nSet the independent source **Vᵢₙ = 0** (so the left side of Rₛ is grounded) and replace DC supplies by grounds:\n\n* Node **G** (the actual gate of M₁) is connected to ground through **Rₛ**.\n* Between **G** and **Vₒᵤₜ** is **Cgs₁**.\n* M₁ contributes a transconductance current **gₘ₁·vgs₁** and an output resistance **rₒ₁**.\n* M₂ contributes **rₒ₂**.\n\nWe apply a test voltage **Vₓ** at Vₒᵤₜ and find the current **Iₜ** entering the node.\n\n---\n\n### 2.  What happens at DC (ω = 0)?\n\nCgs₁ is open, so **Vg = 0**.  \nHence **vgs₁ = Vg – Vₒᵤₜ = –Vₓ**.\n\nThe transistor acts as a perfect feedback current source: it sinks (or sources) **gₘ₁Vₓ**, giving a very low output resistance\n\n\\[\nZ_{\\text{out}}(0)\\approx \\frac{1}{g_{m1}}\\;\\|\\;r_{o1}\\;\\|\\;r_{o2}.\n\\]\n\nSo at DC the impedance is **purely resistive** and small.\n\n---\n\n### 3.  What happens at high frequency?\n\nNow **Cgs₁** is a short at sufficiently high frequencies. Because of **Rₛ**, the gate node **G** cannot instantaneously follow Vₒᵤₜ. The current through Cgs₁ creates a voltage drop across Rₛ, so **Vg is phase‑shifted** relative to Vₒᵤₜ.\n\nWriting KCL at node **G** (ignoring Cgd₁ for simplicity; it only changes the time constant slightly):\n\n\\[\n\\frac{V_g}{R_s}+sC_{gs1}(V_g-V_x)=0\n\\quad\\Longrightarrow\\quad\nV_g = V_x\\,\\frac{sR_sC_{gs1}}{1+sR_sC_{gs1}}.\n\\]\n\nThe transistor’s controlled source is driven by\n\n\\[\nv_{gs1}=V_g-V_x = -V_x\\,\\frac{1}{1+sR_sC_{gs1}}.\n\\]\n\nBecause of the **RₛCgs₁** low‑pass behavior, the magnitude of **vgs₁** falls and its phase lags as frequency rises.\n\nThe current contributed by M₁’s branch (transconductance + Cgs₁) is\n\n\\[\nI_{M1}=(g_{m1}+sC_{gs1})(V_x-V_g).\n\\]\n\nUsing the expression for **Vg** above, the impedance of M₁’s branch becomes\n\n\\[\nZ_{M1}(s)=\\frac{V_x}{I_{M1}}\n      =\\frac{1+sR_sC_{gs1}}{g_{m1}+sC_{gs1}}.\n\\]\n\nThis is the key result.  Now separate real and imaginary parts at **s = jω**:\n\n\\[\nZ_{M1}(j\\omega)=\n\\frac{g_{m1}+\\omega^2R_sC_{gs1}^2}{g_{m1}^2+(\\omega C_{gs1})^2}\n\\;+\\;j\\,\n\\frac{\\omega C_{gs1}(g_{m1}R_s-1)}{g_{m1}^2+(\\omega C_{gs1})^2}.\n\\]\n\n---\n\n### 4.  The inductive condition\n\nThe imaginary part is **positive** (i.e. the current **lags** the voltage, exactly like an inductor **L**) if and only if\n\n\\[\n\\boxed{g_{m1}R_s > 1}\n\\qquad\\Longleftrightarrow\\qquad\nR_s > \\frac{1}{g_{m1}}.\n\\]\n\nWhen this holds:\n\n* At low ω, **Im(Z) ≈ 0** and **Z ≈ 1/gₘ₁**.\n* As ω increases, the **RₛCgs₁** delay makes **gₘ₁** less effective; the feedback current drops.\n* The impedance **rises** from **1/gₘ₁** toward the asymptotic value **Rₛ** (resistive).\n* Because the rise is due to a **phase lag** (not a lead), the reactance is **positive**: the branch behaves like a resistor **R** in series with an **inductor L**.\n\nThe total output impedance is this branch in parallel with **rₒ₁** and **rₒ₂**:\n\n\\[\nZ_{\\text{out}} = Z_{M1}(s)\\;\\|\\;r_{o1}\\;\\|\\;r_{o2}.\n\\]\n\nSince **Z_M1** has **Im > 0**, the whole **Z_out** is **inductive** over the frequency range where the pole (≈ 1/RₛCgs₁) and zero (≈ 1/RₛCgs₁? Actually the zero is at 1/RₛCgs₁ and the “pole” of the effective gₘ roll‑off is lower) create that phase lag.\n\n---\n\n### 5.  Physical intuition\n\n* **Rₛ is “too large”**: The gate cannot respond quickly to a change at Vₒᵤₜ because the RC time constant **RₛCgs₁** is long.\n* **gₘ₁ “turns off” at high frequency**: The transistor no longer supplies the instantaneous feedback current needed to hold Vₒᵤₜ down; the effective small‑signal resistance seen at the output therefore **increases** with frequency.\n* An impedance that **increases** with frequency with a **lagging current** is the hallmark of an **inductor**.\n\nIn LDO and source‑follower design this is a classic stability issue: the **inductive Z_out** of the pass device can resonate with the external load capacitance **C_L**, creating an unwanted high‑Q pole‑zero pair or even oscillation.\n\n---\n\n### Summary\n\nThe output impedance is inductive because **Rₛ and Cgs₁ form an RC delay at the gate of M₁**. When **gₘ₁Rₛ > 1**, that delay causes the transistor’s transconductance feedback to lag behind Vₒᵤₜ. The resulting small‑signal impedance\n\n\\[\nZ_{M1}(s)\\approx \\frac{1+sR_sC_{gs1}}{g_{m1}+sC_{gs1}}\n\\]\n\nhas a **positive imaginary part**, i.e. it looks like a resistance in series with an inductor. Combined with the parallel resistances rₒ₁ and rₒ₂, the **overall Z_out of the shown circuit is inductive** over an intermediate frequency range.",
        "format": "markdown",
        "sha256": "55b6eb8390b94b8a8bb331ae2d4772e7297d77c0a0739f8335592f09b25fd312"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the impedance transition from about 1/gm1 to Rs, with inductive behavior when Rs > 1/gm1. Its minor pole-zero wording confusion does not change the central explanation.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 30572,
        "total_tokens": 32374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 30572,
        "total_tokens": 32374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25231,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key is that **M₁ is operated as a common‑drain (source‑follower) transistor**: its drain is tied to the AC ground of VDD, its source is the output node Vout, and M₂ simply acts as a DC current‑sink load (its gate Vb is a fixed bias).  \nBecause the input is applied through a **series resistance Rₛ**, the internal gate node G of M₁ is isolated from the ideal voltage source Vin. The transistor’s gate‑source capacitance Cgs then creates a feedback path from Vout back to G, and the interaction of Rₛ and Cgs makes the effective transconductance frequency‑dependent.\n\n---\n\n### 1.  Low‑frequency (DC) behavior\nAt DC the capacitances are open. The transistor supplies a current gm₁·vgs, and any change in Vout is opposed by that current. The output resistance is therefore the familiar low value of a source follower:\n\n\\[\nR_{\\text{out,DC}} \\approx \\frac{1}{g_{m1}}\\;\\parallel\\;r_{o1}\\;\\parallel\\;r_{o2}\n\\]\n\n---\n\n### 2.  What happens when frequency increases?\nApply a small AC test voltage Vₓ at Vout (set Vin = 0, so the left side of Rₛ is grounded).  \nThe current through Cgs forces a voltage Vg at the internal gate node G:\n\n\\[\nV_g = V_x\\,\\frac{sC_{gs}}{\\frac{1}{R_s}+s(C_{gs}+C_{gd})}\n\\]\n\nBecause of Rₛ, **Vg cannot instantly track Vₓ**; it lags behind. The controlling voltage of M₁ is therefore\n\n\\[\nv_{gs} = V_g - V_x\n\\]\n\nwhich is **smaller in magnitude** than Vₓ and phase‑shifted.\n\nThe transistor’s small‑signal drain current is gm₁·vgs. Since vgs is reduced, the feedback that normally “fights” Vₓ is weakened. In fact, as ω rises the impedance of Cgs drops, Vg moves closer to Vₓ, vgs → 0, and the transistor’s effective transconductance falls toward zero. Because\n\n\\[\nR_{\\text{out}} \\approx \\frac{1}{g_{m,\\text{eff}}}\n\\]\n\nthe output impedance **rises with frequency**.\n\n---\n\n### 3.  The inductive term (small‑signal result)\nCarrying out the KCL at Vout (ignoring ro’s for clarity) gives the exact impedance:\n\n\\[\nZ_{\\text{out}} = \\frac{1}{g_{m1}}\\,\\frac{1+sR_s(C_{gd}+C_{gs})}{1+s\\left(R_sC_{gd}+\\frac{C_{gs}}{g_{m1}}\\right)+s^2\\frac{R_sC_{gs}C_{gd}}{g_{m1}}}\n\\]\n\nExpanding to first order in s = jω (i.e. at frequencies where the RC time constant of Rₛ and Cgs is active but not yet dominant):\n\n\\[\n\\boxed{Z_{\\text{out}} \\approx \\frac{1}{g_{m1}} + s\\,\\frac{C_{gs}\\left(R_s - \\frac{1}{g_{m1}}\\right)}{g_{m1}}}\n\\]\n\nAt s = jω:\n\n\\[\nZ_{\\text{out}} \\approx \\frac{1}{g_{m1}} \\;+\\; j\\omega\\,\\underbrace{\\frac{C_{gs}\\left(R_s - 1/g_{m1}\\right)}{g_{m1}}}_{L_{\\text{eq}}}\n\\]\n\n- The real part is still ≈ 1/gm₁.\n- The imaginary part is **positive** (inductive) provided\n\n\\[\n\\boxed{R_s > \\frac{1}{g_{m1}}}\n\\]\n\nThe equivalent inductance is roughly\n\n\\[\nL_{\\text{eq}} \\approx \\frac{C_{gs}R_s}{g_{m1}} \\quad (\\text{when } R_s \\gg 1/g_{m1})\n\\]\n\n---\n\n### 4.  Physical intuition\n- **Without Rₛ** (Rₛ = 0), Vg is AC ground, vgs = –Vₓ, and Zout simply rolls off capacitively because Cgs loads the output.\n- **With a large Rₛ**, the gate node G is “floating” at AC. Cgs feeds Vout back to G, but the voltage divider formed by Rₛ and Cgs causes Vg to **follow Vout with a delay**. The transistor’s current response therefore lags the output change, which is exactly what an inductor does (current lags voltage).\n\nThus, the series resistance Rₛ transforms the low resistive output of the source follower into an **inductive impedance** at moderate frequencies: the output looks like a small resistance (≈1/gm₁) in series with an equivalent inductance L_eq determined by Cgs, Rₛ, and gm₁.\n\n---\n\n**Bottom line:** The output impedance is inductive because **Rₛ isolates the gate from the input**, and **Cgs feeds the output signal back to that isolated gate**. The resulting phase lag reduces the effective vgs and therefore the effective gm, causing the impedance to grow with frequency in an inductive manner.",
        "format": "markdown",
        "sha256": "3a1c6128610ac0825a181166d91af6073f47a59368ded830dc493bfeab8e76b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and the Rs–Cgs feedback mechanism, and derives the correct first-order inductive term and condition Rs > 1/gm1. Minor imprecision in the phase and high-frequency wording does not change the essential explanation.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 20734,
        "total_tokens": 22536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 20734,
        "total_tokens": 22536,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a **common‑drain (source‑follower) stage**:\n\n* **M₁** is an NMOS transistor with its **drain at VDD** (AC ground) and its **source at the output node Vout**.  \n  Its gate is driven by the input through a series resistor **Rₛ**.\n* **M₂** is a current‑sink NMOS (gate biased at DC V_b) that provides the DC bias current; its small‑signal resistance is **r_o₂**.\n\nAt DC the output resistance is simply the parallel combination of the transistor’s intrinsic source resistance and the load:\n\n\\[\nR_{\\text{out,DC}} \\approx \\frac{1}{g_{m1}}\\;\\|\\;r_{o2}\n\\]\n\nbecause **no DC current flows into the gate**, so **Rₛ has no effect** at DC.\n\n---\n\n### Why it can become inductive\n\nThe inductive behavior comes from the interaction of **Rₛ** with the **intrinsic gate–source capacitance C_gs₁** of M₁ (and, to a lesser extent, C_gd₁).  \nIn the small‑signal model (set V_in = 0 for impedance calculation, so the left side of Rₛ is ground):\n\n* The output node Vout (M₁’s source) is coupled back to the gate node **G** through **C_gs₁**.\n* Node G is **not** a perfect AC ground: it is connected to ground through **Rₛ**, so a current through C_gs₁ creates a voltage drop across Rₛ.\n\nIgnoring C_gd₁ and the output resistances for clarity, the impedance looking **up** into M₁’s source is\n\n\\[\nZ_{\\uparrow}(s)\\;=\\;\\frac{1+sR_sC_{gs1}}{g_{m1}+sC_{gs1}}\n\\]\n\nThis function has:\n\n* a **zero** at \\(\\displaystyle \\omega_z = \\frac{1}{R_sC_{gs1}}\\)\n* a **pole** at \\(\\displaystyle \\omega_p = \\frac{g_{m1}}{C_{gs1}}\\)\n\n---\n\n### The condition for inductive behavior\n\nCompare the two frequencies:\n\n* If **Rₛ < 1/g_m₁**, then \\(\\omega_z > \\omega_p\\). The impedance falls from 1/g_m₁ toward Rₛ; the phase is **capacitive** (negative imaginary part).\n* If **Rₛ > 1/g_m₁**, then \\(\\omega_z < \\omega_p\\). The impedance **rises** with frequency from 1/g_m₁ at DC up to Rₛ at high frequency.\n\nBecause the magnitude increases with frequency, the phase is **positive**; i.e. the impedance has an **inductive** character:\n\n\\[\nZ_{\\uparrow}(j\\omega)\\;\\approx\\;\\frac{1}{g_{m1}} \\;+\\; s\\,L_{\\text{eq}},\\qquad \nL_{\\text{eq}} = \\frac{C_{gs1}}{g_{m1}^2}\\,(R_s g_{m1}-1)\\;>\\;0\n\\]\n\nThe total output impedance is the parallel combination with M₂’s load:\n\n\\[\nZ_{\\text{out}} = Z_{\\uparrow} \\;\\|\\; r_{o2}\n\\]\n\nso **Z_out can indeed be inductive** over a broad frequency range when **Rₛ > 1/g_m₁**.\n\n---\n\n### Physical intuition\n\n1. **DC:** No current enters the gate, so v_g = 0 (AC ground). The transistor responds to a change in Vout with a current g_m₁·v_t, giving a resistive 1/g_m₁.\n2. **As frequency rises:** C_gs₁ couples Vout to the gate. Because **Rₛ** limits how quickly the gate can discharge to ground, **v_g rises with a delay/phase lag** relative to v_t.\n3. **Reduced v_gs:** The lag means v_gs = v_g – v_t decreases faster than v_t alone would dictate. The transistor therefore supplies **less current** than a pure resistor of value 1/g_m₁ would.\n4. **Current lags voltage:** Because the controlling current (g_m₁ v_gs) is delayed with respect to v_t, the overall current drawn from Vout **lags** the applied voltage—exactly the behavior of an inductor.\n\nIn short, **Rₛ together with C_gs₁ creates a frequency‑dependent “degradation” of the transistor’s effective transconductance**. When Rₛ is large enough (Rₛ > 1/g_m₁), the impedance looking into the source increases with frequency, yielding an **inductive output impedance**.",
        "format": "markdown",
        "sha256": "766599225f69878eb390d598206474a9ccc21e3b128fd8bddafd8e8001b17aa9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the relevant impedance, including the transition from about 1/gm1 at low frequency to Rs at high frequency as Cgs1 couples the gate to the source. It correctly concludes that the impedance is inductive when Rs > 1/gm1. The phase-lag intuition is imprecise, but does not undermine the correct central explanation.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 33554,
        "total_tokens": 35356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1802,
        "output_tokens": 33554,
        "total_tokens": 35356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, the circuit consists of:\n\n- **V_DD** and load resistor **R_D1** connected to output node **V_out**.\n- **M₁**: NMOS transistor, gate = node **X**, source = GND, drain = **V_out**.\n- **M₂**: NMOS transistor, gate = **V_out**, source = GND, drain = node **X**.\n- **i_in**: Independent DC (or signal) current source injecting current **into node X** from ground.\n\nThus **M₁** and **M₂** form a **cross-coupled (positive-feedback) NMOS pair**, biased by **i_in** and loaded by **R_D1**.\n\n---\n\n## 1. DC Operating-Point Analysis\n\nAssume both transistors operate in **saturation** with identical parameters\n$$K = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right), \\qquad V_{th}, \\qquad \\lambda \\approx 0 \\ (\\text{for simplicity}).$$\n\n### KCL Equations\n- **At node X:** The only DC path to ground is through **M₂** (gate draws zero current).\n  $$\\boxed{I_{D2} = i_{in}}$$\n- **At V_out:** Current from R_D1 equals M₁ drain current.\n  $$\\boxed{I_{D1} = \\frac{V_{DD} - V_{out}}{R_{D1}}}$$\n\n### Transistor Currents\n- **M₂:** $V_{GS2}=V_{out}$, $V_{DS2}=V_X$\n  $$I_{D2} = K(V_{out}-V_{th})^2 \\;\\Rightarrow\\; \\boxed{V_{out} = V_{th} + \\sqrt{\\frac{i_{in}}{K}}} \\tag{1}$$\n- **M₁:** $V_{GS1}=V_X$, $V_{DS1}=V_{out}$\n  $$I_{D1} = K(V_X-V_{th})^2 \\;\\Rightarrow\\; \\boxed{V_X = V_{th} + \\sqrt{\\frac{V_{DD}-V_{out}}{R_{D1}K}}} \\tag{2}$$\n\n### Validity Conditions (Saturation)\n- **M₂:** $V_{DS2} \\ge V_{GS2}-V_{th} \\;\\Rightarrow\\; V_X \\ge V_{out}-V_{th}$.\n  Using (1)–(2) this requires $I_{D1} \\ge i_{in}$.\n- **M₁:** $V_{DS1} \\ge V_{GS1}-V_{th} \\;\\Rightarrow\\; V_{out} \\ge V_X-V_{th}$.\n\nIf $i_{in}$ is too large, **M₂ enters triode** and (1) becomes a quadratic involving both $V_{out}$ and $V_X$.\n\n### Key DC Insight\nBecause **M₂’s gate senses V_out**, its drain current is set directly by $i_{in}$. Thus **V_out is primarily determined by the input current** via (1), while $V_X$ is “slaved” to $I_{D1}$ through (2). The resistor $R_{D1}$ sets $I_{D1}$ but does **not** directly set $V_{out}$ (as long as M₂ stays in saturation).\n\n---\n\n## 2. Small-Signal Analysis\n\nUse small-signal parameters evaluated at the DC bias:\n$$g_{m1}, \\ g_{m2}, \\ r_{o1}=\\frac{1}{\\lambda I_{D1}}, \\ r_{o2}=\\frac{1}{\\lambda I_{D2}}.$$\n\nThe small-signal equivalent has:\n- $i_{in}$ as the input signal (current source).\n- $R_{D1}$ to AC ground.\n- $v_x$ at node X, $v_{out}$ at output.\n\n### KCL (small-signal)\n**Node X:**\n$$i_{in} = g_{m2}v_{out} + \\frac{v_x}{r_{o2}} \\tag{3}$$\n\n**Node V_out:**\n$$\\frac{v_{out}}{R_{D1}} + \\frac{v_{out}}{r_{o1}} + g_{m1}v_x = 0 \\tag{4}$$\n\n### Transfer Resistance ($v_{out}/i_{in}$)\nSolving (3)–(4) for $v_{out}$:\n\n$$\\boxed{ \\frac{v_{out}}{i_{in}} = \\frac{-g_{m1}r_{o2}}{\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}-g_{m1}g_{m2}r_{o2}} }$$\n\n**Special case (long channel, $\\lambda \\to 0$, so $r_o \\to \\infty$):**\nThe denominator diverges to $-g_{m1}g_{m2}r_{o2}$, yielding\n$$\\boxed{ \\frac{v_{out}}{i_{in}} \\approx \\frac{1}{g_{m2}} }$$\nThis is exactly the derivative of (1): $\\frac{dV_{out}}{di_{in}} = \\frac{1}{2\\sqrt{K i_{in}}} = 1/g_{m2}$.\n\n### Output Resistance ($R_{out}$)\nTurn off $i_{in}$ (open it). Applying a test voltage $v_t$ at $V_{out}$:\n\n$$\\boxed{ R_{out} = \\left[ \\frac{1}{R_{D1}}+\\frac{1}{r_{o1}} - g_{m1}g_{m2}r_{o2} \\right]^{-1} }$$\n\nBecause $g_{m1}g_{m2}r_{o2} \\gg (1/R_{D1}+1/r_{o1})$ typically, the term in brackets is **negative**, so:\n\n$$\\boxed{ R_{out} < 0}$$\n\nThe cross-coupled pair acts as a **negative-resistance** element due to **positive feedback**.\n\n---\n\n## 3. Feedback & Stability\n\nThe loop is:\n$$v_{out} \\xrightarrow{g_{m2}} i_{d2} \\xrightarrow{r_{o2}} v_x \\xrightarrow{g_{m1}} i_{d1} \\xrightarrow{R_{D1}\\parallel r_{o1}} v_{out}$$\n\n**Loop gain** (breaking the loop at $v_{out}$):\n$$L = g_{m1}g_{m2}r_{o2}(R_{D1}\\parallel r_{o1})$$\n\n- **If $L < 1$:** The DC solution in saturation is stable; small-signal $R_{out}$ is finite negative but not catastrophic.\n- **If $L > 1$:** The positive feedback is too strong. The circuit **latches** into one of two bistable states (e.g., M₁ fully on / M₂ off, or vice versa), and the small-signal resistance becomes unstable.\n\nThus, **design requires** $g_{m1}g_{m2}r_{o2}R_{D1} < 1$ (approximately) to maintain a unique operating point.\n\n---\n\n## 4. Summary of Function\n\n| Feature | Result |\n|---|---|\n| **DC $V_{out}$** | $V_{th}+\\sqrt{i_{in}/K}$ (set by M₂) |\n| **DC $V_X$** | $V_{th}+\\sqrt{(V_{DD}-V_{out})/(R_{D1}K)}$ (set by M₁) |\n| **Small-signal gain** | $v_{out}/i_{in} \\approx 1/g_{m2}$ (transimpedance) |\n| **Output resistance** | Negative ($R_{out}<0$) due to cross-coupling |\n| **Stability** | Positive feedback loop; need $L<1$ to avoid bistability |\n\nIn short, **M₂ acts as a voltage-controlled current source that converts $i_{in}$ to $V_{out}$**, while **M₁ and R_D1 provide the load path**. The cross-coupled architecture is the classic building block of **Schmitt triggers** and **bistable latches**; here it is biased by a current source to establish a controlled, but potentially unstable, DC operating point.",
        "format": "markdown",
        "sha256": "c21585f253697cd7a32f8d019407fba78d51ee040385daf57a541ce9d843a4af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate connection to Vout and the positive-feedback loop, and recognizes instability and latching when loop gain exceeds one. These satisfy the golden solution’s full-credit rule despite secondary errors in the DC and resistance analysis.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 19738,
        "total_tokens": 21947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 19738,
        "total_tokens": 21947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **MOSFET-based transimpedance (current-to-voltage) stage** (or a current-mirror biased common-source amplifier). Based on the topology:\n\n* **$M_1$** is an NMOS common-source transistor: Gate = node **X**, Drain = $V_{out}$, Source = GND.\n* **$M_2$** is a **diode-connected** NMOS: Gate & Drain are tied together at node **X**, Source = GND.\n* **$i_{in}$** is an independent current source injecting current into node X.\n* **$R_{D1}$** is the resistive load from $V_{DD}$ to $V_{out}$.\n\nBecause the gate of $M_1$ draws zero DC current, $i_{in}$ must flow entirely through the diode-connected transistor $M_2$ to ground. Thus $M_2$ converts $i_{in}$ into a gate-source voltage $V_X$, which in turn biases $M_1$.\n\nBelow is a systematic DC and small-signal analysis.\n\n---\n\n## 1. DC Operating-Point Analysis\n\nUse the long-channel saturation model for both NMOS devices:\n$$I_D = \\frac{1}{2}k_n(V_{GS}-V_{th})^2, \\qquad k_n=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)$$\n\n### Transistor $M_2$ (diode-connected)\nBecause $V_{DS2}=V_{GS2}=V_X$ and it operates in saturation:\n$$i_{in} = \\frac{k_{n2}}{2}\\left(V_X - V_{th}\\right)^2$$\nSolving for the node voltage:\n$$\\boxed{V_X = V_{th} + \\sqrt{\\frac{2\\,i_{in}}{k_{n2}}}}$$\n\n### Transistor $M_1$\nIts gate is at $V_X$ and its source is grounded:\n$$I_{D1} = \\frac{k_{n1}}{2}\\left(V_X - V_{th}\\right)^2 = \\frac{k_{n1}}{k_{n2}}\\,i_{in}$$\n\nIf the devices are matched ($k_{n1}=k_{n2}$), then **$I_{D1} = i_{in}$** (a 1:1 current mirror).\n\n### Output Voltage\n$$V_{out} = V_{DD} - I_{D1}R_{D1}$$\nFor matched devices:\n$$\\boxed{V_{out} = V_{DD} - i_{in}R_{D1}}$$\n\n### Saturation Constraints\n* **$M_2$:** Automatically in saturation because $V_{DS2}=V_{GS2} \\ge V_{GS2}-V_{th}$.\n* **$M_1$:** Must satisfy $V_{DS1} \\ge V_{GS1}-V_{th}$, i.e.\n  $$V_{out} \\ge V_X - V_{th} \\;\\Rightarrow\\; V_{DD} - I_{D1}R_{D1} \\ge V_X - V_{th}.$$\n  This sets the maximum allowable $i_{in}$ before $M_1$ enters triode.\n\n---\n\n## 2. Small-Signal Analysis\n\nDraw the AC equivalent with $V_{DD}$ grounded.\n\n| Element | Small-Signal Model |\n|---|---|\n| **$M_2$ (diode)** | Between X and GND: resistance $r_{d2} = \\frac{1}{g_{m2}}$ (ignoring $r_{o2}$ for simplicity, or $r_{d2}=1/g_{m2}\\parallel r_{o2}$) |\n| **$M_1$** | Voltage-controlled current source $g_{m1}v_x$, output resistance $r_{o1}$ |\n| **$R_{D1}$** | Resistor to ground |\n\n### Node X Equation\nThe input current $i_{in}$ (small-signal) enters node X and leaves through $M_2$:\n$$v_x = i_{in}\\left(\\frac{1}{g_{m2}} \\parallel r_{o2}\\right) \\approx \\frac{i_{in}}{g_{m2}}$$\n\n### Output Node\nThe common-source transistor pulls current from $V_{out}$:\n$$v_{out} = -g_{m1}v_x \\left(R_{D1} \\parallel r_{o1}\\right)$$\n\nSubstituting $v_x$:\n$$\\boxed{v_{out} = -\\frac{g_{m1}}{g_{m2}}\\left(R_{D1} \\parallel r_{o1}\\right)i_{in}}$$\n\nFor **matched** transistors ($g_{m1}=g_{m2}=g_m$) and $r_{o1} \\gg R_{D1}$:\n$$\\boxed{\\frac{v_{out}}{i_{in}} \\approx -R_{D1}}$$\n\nThe circuit therefore behaves as a **linear transimpedance amplifier** with gain magnitude set by $R_{D1}$.\n\n### Transconductances (evaluated at the DC bias)\n$$g_{m1} = \\sqrt{2k_{n1}I_{D1}}, \\qquad g_{m2} = \\sqrt{2k_{n2}i_{in}}$$\n\n---\n\n## 3. Impedances\n\n* **Input impedance** at node X:\n  $$R_{in} = \\frac{v_x}{i_{in}} = \\frac{1}{g_{m2}} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}}$$\n  This is typically a few hundred ohms to $\\sim$1 kΩ.\n\n* **Output impedance** at $V_{out}$:\n  $$R_{out} = R_{D1} \\parallel r_{o1}$$\n\n---\n\n## 4. Key Takeaways & Physical Interpretation\n\n| Feature | Description |\n|---|---|\n| **Function** | Converts an input **current** $i_{in}$ into an output **voltage** $V_{out}$. It is essentially a **current-controlled common-source stage**. |\n| **Linearity** | Because $V_X \\propto \\sqrt{i_{in}}$ while $I_{D1} \\propto (V_X-V_{th})^2$, the square-root nonlinearity cancels. For matched devices, $I_{D1}$ is exactly proportional to $i_{in}$, making $V_{out}$ linear with $i_{in}$. |\n| **Gain** | Transresistance gain is $-R_{D1}$ (when matched). It is set by a passive resistor, making the gain predictable and independent of transistor parameters (to first order). |\n| **Biasing** | $M_2$ acts as a **diode-connected load/reference** that establishes the gate bias for $M_1$ without requiring an external voltage source. |\n| **Applications** | Photodiode front-ends, current-output DAC interfaces, and active current-to-voltage converters in analog/mixed-signal design. |\n\nIf $k_{n1} \\neq k_{n2}$, the DC current relationship is scaled by the $W/L$ ratio:\n$$I_{D1} = i_{in}\\frac{(W/L)_1}{(W/L)_2}, \\qquad v_{out}/i_{in} = -\\sqrt{\\frac{k_{n1}}{k_{n2}}}\\left(R_{D1}\\parallel r_{o1}\\right)$$\n\nIn summary: **$M_2$ diode-converts $i_{in}$ to $V_X$; $M_1$ amplifies $V_X$ as a common-source stage; $R_{D1}$ performs the current-to-voltage conversion at the output.**",
        "format": "markdown",
        "sha256": "91a3e707d0ed399d9adcbf2898d122d491d149291f2dca5906380491323b2e81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a common-source stage driven by input current at X, but wrongly treats M2 as diode-connected and misses the positive-feedback loop, so the claimed stable transimpedance operation is incorrect.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 15020,
        "total_tokens": 17229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 15020,
        "total_tokens": 17229,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure is a **MOS current-mirror biased common-source (CS) stage** (or a **transresistance amplifier** driven by a current input). Here is a step-by-step analysis.\n\n---\n\n## 1. Circuit Identification\n\n| Component | Role / Connection |\n|-----------|-------------------|\n| **$M_1$** | NMOS transistor: **gate** = node $X$, **source** = GND, **drain** = $V_{out}$ |\n| **$M_2$** | NMOS transistor: **diode-connected** (gate shorted to drain at node $X$), **source** = GND |\n| **$R_{D1}$** | Drain load resistor to $V_{DD}$ |\n| **$i_{in}$** | Ideal DC / small-signal current source injecting into node $X$ |\n| **$V_{out}$** | Output node (open circuit, no external load shown) |\n\nBecause $M_2$ is diode-connected, it provides a DC path to ground for $i_{in}$ and sets a gate-source voltage $V_{GS}$ that is shared by both transistors.\n\n---\n\n## 2. DC Operating-Point Analysis\n\n### Node $X$ (KCL)\nMOS gates draw zero DC current, so the entire input current must flow through $M_2$:\n$$\\boxed{I_{D2} = i_{in}}$$\n\n### $M_2$ (diode-connected NMOS)\nAssuming $M_2$ is in **saturation**:\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS} - V_{th})^2$$\n\nSolving for the node voltage:\n$$\\boxed{V_X = V_{GS} = V_{th} + \\sqrt{\\frac{2\\,i_{in}}{\\mu_n C_{ox}(W/L)_2}}}$$\n\n### $M_1$ (common-source NMOS)\nSince $V_{GS1} = V_X$ (shared gate node, both sources grounded):\n$$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{GS} - V_{th})^2 = i_{in}\\,\\frac{(W/L)_1}{(W/L)_2}$$\n\nIf the two devices are **matched** ($W/L$ identical), then:\n$$\\boxed{I_{D1} = i_{in}}$$\n\n### Output node $V_{out}$ (KCL)\nWith $V_{out}$ open:\n$$\\frac{V_{DD} - V_{out}}{R_{D1}} = I_{D1}$$\n\n$$\\boxed{V_{out} = V_{DD} - I_{D1}R_{D1} = V_{DD} - i_{in}\\,\\frac{(W/L)_1}{(W/L)_2}R_{D1}}$$\n\n### Saturation (Active-Region) Conditions\n- **$M_2$**: $V_{DS2} = V_X \\ge V_{GS}-V_{th}$  → always satisfied.\n- **$M_1$**: $V_{DS1} = V_{out} \\ge V_{GS}-V_{th}$.\n\nUsing the matched case ($I_{D1}=i_{in}$):\n$$V_{out} \\ge V_{GS} - V_{th} \\quad\\Rightarrow\\quad R_{D1} \\le \\frac{V_{DD} - (V_{GS}-V_{th})}{i_{in}}$$\nIf $R_{D1}$ is too large, $M_1$ enters **triode** (linear) region.\n\n---\n\n## 3. Small-Signal Analysis ($i_{in}$ has an AC component $\\hat{i}_{in}$)\n\nReplace DC sources with AC ground ($V_{DD} \\to$ GND). Use small-signal parameters $g_m$ and $r_o$.\n\n### Equivalent at Node $X$\nThe diode-connected $M_2$ presents a small-signal resistance:\n$$r_{eq2} = \\frac{1}{g_{m2} + 1/r_{o2}} \\approx \\frac{1}{g_{m2}}$$\n\nBecause the gate of $M_1$ draws no current:\n$$\\hat{v}_X = \\hat{i}_{in} \\cdot r_{eq2} \\approx \\frac{\\hat{i}_{in}}{g_{m2}}$$\n\n### Common-Source Stage $M_1$\n$$\\hat{v}_{gs1} = \\hat{v}_X$$\n\nThe controlled drain current is $g_{m1}\\hat{v}_{gs1}$. At $V_{out}$ the load is $R_{D1} \\parallel r_{o1}$:\n$$\\hat{v}_{out} = -g_{m1}\\hat{v}_{gs1}(R_{D1} \\parallel r_{o1})$$\n\nSubstituting $\\hat{v}_{gs1} = \\hat{i}_{in}/g_{m2}$:\n$$\\boxed{\\frac{\\hat{v}_{out}}{\\hat{i}_{in}} \\approx -\\frac{g_{m1}}{g_{m2}}\\,(R_{D1} \\parallel r_{o1})}$$\n\n**If $M_1$ and $M_2$ are matched and biased at the same $I_D = i_{in}$** ($g_{m1}=g_{m2}$):\n$$\\boxed{\\frac{\\hat{v}_{out}}{\\hat{i}_{in}} \\approx -R_{D1}} \\quad (\\text{assuming } r_{o1} \\gg R_{D1})$$\n\nThus the circuit acts as a **transresistance amplifier** with gain magnitude $\\approx R_{D1}$.\n\n### Key Small-Signal Metrics\n| Parameter | Expression |\n|-----------|------------|\n| Input resistance at $X$ | $R_{in} \\approx 1/g_{m2}$ |\n| Output resistance | $R_{out} = R_{D1} \\parallel r_{o1}$ |\n| Voltage gain (if $v_{in}$ applied at $X$) | $A_v = -g_{m1}R_{out}$ |\n| **Transresistance gain** $v_{out}/i_{in}$ | $\\approx -R_{D1}$ (matched) |\n\n---\n\n## 4. Physical Interpretation / Function\n\n- **Bias function:** $M_2$ converts the reference current $i_{in}$ into a $V_{GS}$ voltage. $M_1$ replicates (or scales) that current.\n- **Amplification:** Because $M_1$ is a common-source stage with resistive load $R_{D1}$, a small change $\\hat{i}_{in}$ changes $V_{GS}$, which modulates $I_{D1}$, producing a voltage swing $\\hat{v}_{out} \\approx -\\hat{i}_{in}R_{D1}$ at the output.\n- **Result:** The circuit is a **current-controlled voltage source** (transimpedance stage). If $M_1$ and $M_2$ are identical, the small-signal transfer is simply $\\hat{v}_{out}/\\hat{i}_{in} \\approx -R_{D1}$.\n\n---\n\n### Quick Design Check (Example Numbers)\nSuppose $i_{in} = 100\\,\\mu\\text{A}$, $V_{th}=0.5\\,$V, $\\mu_n C_{ox}(W/L)=200\\,\\mu\\text{A/V}^2$:\n- $V_{GS} = 0.5 + \\sqrt{2(100)/200} = 1.5\\,$V\n- With $R_{D1}=5\\,$k$\\Omega$ and $V_{DD}=3.3\\,$V:\n  - $V_{out} = 3.3 - 0.1\\text{mA}\\times 5\\text{k}\\Omega = 2.8\\,$V\n  - $V_{DS1}=2.8\\,$V $\\ge V_{GS}-V_{th}=1.0\\,$V → **saturation satisfied**.\n  - $g_m \\approx 2I_D/(V_{GS}-V_{th}) = 0.2\\,$mA/$1\\,$V $= 0.2\\,$mS.\n  - Small-signal gain $\\approx -5\\,$k$\\Omega$.\n\nIf you need the **exact expression** for a specific $W/L$ ratio or if $M_1/M_2$ are assumed to be in subthreshold / triode, let me know and I can extend the derivation!",
        "format": "markdown",
        "sha256": "24fa4f8d3bb5af4ddf8932a1415ef2f87e5de45ee44d19089309bfc054740dd3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a common-source stage driven at X by the input current, but incorrectly treats M2 as diode-connected and misses the positive-feedback loop.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 15406,
        "total_tokens": 17615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12479,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2209,
        "output_tokens": 15406,
        "total_tokens": 17615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12479,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, this is a **resistive-feedback RF amplifier / Low-Noise Amplifier (LNA)** with a two-stage active core: a **common-gate (CG)** transistor $M_1$ followed by a **common-source (CS)** transistor $M_2$. The external current source $I_{\\mathrm{in}}$ is the DC bias plus RF input ($i_{\\mathrm{in}}$), and $R_F$ is the feedback resistor that both biases the input node and sets the RF input impedance.\n\nBelow is a systematic analysis.\n\n---\n\n## 1. Component & Topology Identification\n\n| Component | Function |\n|---|---|\n| **$M_2$** (NMOS) | Main amplifying transistor; **CS stage**. Gate = node $X$, Source = GND, Drain = $V_{\\mathrm{out}}$. Load = $R_{D2}$. |\n| **$M_1$** (NMOS/PMOS, biased by $V_b$) | **Common-gate** stage connecting node $Y$ (input) to node $X$ (gate of $M_2$). Its gate is AC ground ($V_b$ = DC). |\n| **$R_{D1}$** | DC load for node $X$; also sets AC impedance at $M_2$ gate. |\n| **$R_{D2}$** | Drain load of $M_2$; converts $i_{d2}$ to $v_{\\mathrm{out}}$. |\n| **$R_F$** | Feedback resistor from $V_{\\mathrm{out}}$ to node $Y$. Provides **DC bias** and **negative feedback** for input matching. |\n| **$I_{\\mathrm{in}}$** | DC bias current source; for RF analysis it is open (infinite impedance), but it injects the signal current $i_{\\mathrm{in}}$ at node $Y$. |\n| **$i_{\\mathrm{RF}}$** | RF current flowing through $R_F$, explicitly labeled to highlight feedback current. |\n\nThe signal path is:\n$$\\text{Node }Y \\xrightarrow{M_1(\\text{CG})} \\text{Node }X \\xrightarrow{M_2(\\text{CS})} V_{\\mathrm{out}} \\xrightarrow{R_F} \\text{Node }Y$$\n\n---\n\n## 2. DC Operating-Point Analysis\n\nSet all AC sources to zero ($V_{DD}$, $V_b$, $I_{\\mathrm{in}}$ are DC).\n\n**Node $X$ (gate of $M_2$):**\n$$I_{D1} = \\frac{V_{DD}-V_X}{R_{D1}}, \\qquad V_{GS2} = V_X$$\nBecause $M_2$ gate draws no DC current, $R_{D1}$ supplies exactly $I_{D1}$.\n\n**Node $Y$ (input node):**\n$$I_{\\mathrm{in}} = I_{D1} + \\frac{V_{\\mathrm{out}}-V_Y}{R_F}$$\n\n**Transistor $M_2$:**\n$$I_{D2} = \\frac{V_{DD}-V_{\\mathrm{out}}}{R_{D2}}, \\qquad V_{GS2} = V_X \\ge V_{th,n}$$\n\n**Transistor $M_1$:** Its $V_{GS1} = V_b - V_Y$ (if NMOS with source at $Y$) or $V_{SG1} = V_X - V_b$ (if PMOS with source at $X$). It operates in saturation, passing DC current $I_{D1}$ from node $X$ to node $Y$.\n\nThese four equations determine the DC voltages $V_X$, $V_Y$, $V_{\\mathrm{out}}$ and the bias currents.\n\n---\n\n## 3. Small-Signal (RF) Analysis\n\nFor RF, $V_{DD}$, $V_b$, and $I_{\\mathrm{in}}$ become AC grounds. Assume long-channel behavior with $r_o \\to \\infty$ for simplicity; the key scaling remains.\n\n### 3.1 Effective transconductance of $M_1$ (Common-Gate)\n\n$M_1$ has gate grounded ($v_{g1}=0$), source at $v_Y$, drain at $v_X$.\n\n$$v_{gs1} = -v_Y \\quad \\Rightarrow \\quad i_{d1} = g_{m1}v_{gs1} = -g_{m1}v_Y$$\n\n**KCL at node $X$** (current $i_{d1}$ enters drain; $R_{D1}$ goes to AC ground):\n$$\\frac{v_X}{R_{D1}} + i_{d1} = 0 \\;\\Rightarrow\\; v_X = g_{m1}R_{D1}v_Y$$\n\nSo $M_1$ acts as a **voltage amplifier** from $v_Y$ to $v_X$ with gain $\\approx g_{m1}R_{D1}$.\n\n### 3.2 Common-Source Stage $M_2$\n\n$$v_{gs2} = v_X - 0 = v_X$$\n$$i_{d2} = g_{m2}v_X = g_{m1}g_{m2}R_{D1}v_Y \\equiv G_m v_Y$$\n\nwhere $G_m = g_{m1}g_{m2}R_{D1}$ is the **effective transconductance** of the cascaded CG+CS core.\n\n### 3.3 Output Node $V_{\\mathrm{out}}$\n\n$$i_{d2} \\text{ leaves through } M_2 \\text{ to ground, so at } V_{\\mathrm{out}}:$$\n$$\\frac{v_{\\mathrm{out}}}{R_{D2}} + i_{d2} + \\frac{v_{\\mathrm{out}}-v_Y}{R_F} = 0$$\n\n### 3.4 Input Node $Y$ (the feedback equation)\n\n$M_1$ source current entering the transistor is $i_{s1}=-i_{d1}=g_{m1}v_Y$. Thus at node $Y$:\n$$i_{\\mathrm{in}} + \\underbrace{(i_{s1})}_{\\text{into }M_1} + \\frac{v_{\\mathrm{out}}-v_Y}{R_F} = 0$$\n$$\\Rightarrow \\; i_{\\mathrm{in}} + g_{m1}v_Y + \\frac{v_{\\mathrm{out}}-v_Y}{R_F} = 0$$\n\n### 3.5 Solving for $v_{\\mathrm{out}}$\n\nUsing $v_X = g_{m1}R_{D1}v_Y$, the open-loop voltage gain from $v_Y$ to $v_{\\mathrm{out}}$ is:\n$$A_{OL} \\equiv \\frac{v_{\\mathrm{out}}}{v_Y}\\Big|_{R_F \\to \\infty} = -g_{m2}R_{D2} \\cdot (g_{m1}R_{D1}) = -G_m R_{D2}$$\n\nWith feedback $R_F$ included and assuming **high loop gain** ($|A_{OL}| \\gg 1$), the feedback equation forces:\n$$\\boxed{v_{\\mathrm{out}} \\approx -R_F\\, i_{\\mathrm{in}}}$$\n\nThis is the classic **transimpedance** result: the circuit converts input current $i_{\\mathrm{in}}$ to output voltage $v_{\\mathrm{out}}$ with gain $\\approx -R_F$.\n\n### 3.6 Input Impedance\n\nFrom $i_{\\mathrm{in}} + g_{m1}v_Y + (v_{\\mathrm{out}}-v_Y)/R_F = 0$ and $v_{\\mathrm{out}} \\approx -R_F i_{\\mathrm{in}}$:\n$$v_Y \\approx \\frac{i_{\\mathrm{in}}R_F}{1+G_m R_{D2}} \\approx \\frac{i_{\\mathrm{in}}}{G_m}$$\n\nSo the **small-signal input resistance** is:\n$$\\boxed{R_{\\mathrm{in}} = \\frac{v_Y}{i_{\\mathrm{in}}} \\approx \\frac{1}{G_m} = \\frac{1}{g_{m1}g_{m2}R_{D1}}}$$\n\nThis is a **very low** resistance compared with $1/g_{m2}$ of a single CS stage. The role of $M_1$ is precisely to **boost the effective $g_m$** ($G_m \\gg g_{m2}$), which:\n- Allows a **larger feedback resistor $R_F$** for a given $R_{\\mathrm{in}}$ (e.g., $50\\,\\Omega$ matching).\n- A larger $R_F$ means **lower thermal noise contribution** from the feedback resistor, improving the Noise Figure.\n\n---\n\n## 4. Analysis of $i_{\\mathrm{RF}}$\n\nThe arrow $i_{\\mathrm{RF}}$ denotes the RF current through $R_F$:\n$$i_{\\mathrm{RF}} = \\frac{v_{\\mathrm{out}}-v_Y}{R_F}$$\n\nUsing the high-gain result $v_{\\mathrm{out}} \\approx -R_F i_{\\mathrm{in}}$ and $v_Y \\approx 0$ (because $R_{\\mathrm{in}} \\ll R_F$):\n$$\\boxed{i_{\\mathrm{RF}} \\approx -i_{\\mathrm{in}}}$$\n\n**Physical meaning:** The feedback resistor carries essentially **the entire input RF current** (with opposite sign). Only a small fraction of $i_{\\mathrm{in}}$ enters $M_1$ ($\\approx i_{\\mathrm{in}}/(G_m R_{D2})$). This is why the feedback resistor is the dominant path for the signal current.\n\nBecause $i_{\\mathrm{RF}} \\approx -i_{\\mathrm{in}}$, the thermal noise current of $R_F$ ($4kT/R_F$) contributes directly to the input; however, because $R_F$ can now be made **much larger** than in a single-transistor design ($R_F \\approx G_m R_{D2} \\cdot 50\\,\\Omega$), its noise contribution is suppressed relative to the signal.\n\n---\n\n## 5. Summary of Key Results\n\n| Quantity | Expression / Approximation |\n|---|---|\n| **DC at $X$** | $V_X = V_{DD} - I_{D1}R_{D1}$; $V_{GS2}=V_X$ |\n| **DC at $V_{\\mathrm{out}}$** | $V_{\\mathrm{out}} = V_{DD} - I_{D2}R_{D2}$ |\n| **Effective $g_m$** | $G_m = g_{m1}g_{m2}R_{D1}$ |\n| **Open-loop gain** | $A_{OL} = -G_m R_{D2}$ |\n| **Transimpedance gain** | $Z_T = v_{\\mathrm{out}}/i_{\\mathrm{in}} \\approx -R_F$ |\n| **Input resistance** | $R_{\\mathrm{in}} \\approx 1/G_m = 1/(g_{m1}g_{m2}R_{D1})$ |\n| **Feedback RF current** | $i_{\\mathrm{RF}} \\approx -i_{\\mathrm{in}}$ |\n\n---\n\n### Bottom Line\n\nThis circuit is a **high-gain, resistive-feedback LNA** (or current-input RF amplifier). $M_2$ provides voltage gain; $M_1$ acts as a **common-gate pre-stage** that multiplies the effective transconductance ($G_m$). The feedback resistor $R_F$ sets the transimpedance to $\\approx -R_F$ while allowing $R_{\\mathrm{in}}$ to be tuned to $50\\,\\Omega$ (or any desired value) with a larger $R_F$ and thus lower thermal noise. The labeled current $i_{\\mathrm{RF}}$ is the dominant RF feedback current, approximately equal in magnitude (and opposite in sign) to the input current $i_{\\mathrm{in}}$.",
        "format": "markdown",
        "sha256": "6e50b481a05d71d7b0fb0e9782eba5b7eba4749e27c1c492266654b30349e4c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 29958,
        "total_tokens": 32375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 29958,
        "total_tokens": 32375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19914,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this schematic, I identify a **two-stage RF amplifier with shunt-shunt resistive feedback**—specifically, a **broadband common-gate (CG) → common-source (CS) cascade** that functions as a **current-to-voltage (transimpedance) amplifier**, commonly used as a **wideband Low-Noise Amplifier (LNA)** or RF front-end.\n\nHere is the systematic analysis.\n\n---\n\n## 1. Component & Topology Identification\n\n| Component | Role / Connection |\n|-----------|-----------------|\n| **V_DD** | DC supply rail |\n| **R_D1, R_D2** | Drain load resistors |\n| **M1** | NMOS; **Gate = V_b**, **Source = Node 5** (bias node), **Drain = Node X** → operates as a **Common-Gate (CG)** stage |\n| **M2** | NMOS; **Gate = Node X**, **Source = GND**, **Drain = V_out** → operates as a **Common-Source (CS)** stage |\n| **I_in** | DC current source forcing bias into Node 5 |\n| **V_b** | DC gate bias for M1 |\n| **R_F** | Feedback resistor connecting **V_out → Node 5** |\n| **i_RF** | RF signal current entering at Node 5 (through R_F / external port) |\n| **Node X** | Internal node: M1 drain / M2 gate |\n| **V_out** | Output voltage node |\n\n**Signal flow:**\n```\ni_RF (at Node 5)  →  M1 (CG)  →  Node X  →  M2 (CS)  →  V_out\n                        ↑___________________________↓\n                                    R_F (feedback)\n```\n\n---\n\n## 2. DC Operating Point Analysis\n\n- **I_in** forces a constant DC current into **Node 5**.\n- At Node 5, KCL gives:  \n  $$I_{in} = I_{D1} + I_{R_F,DC}$$\n- **M1** is biased by **V_b**. Its overdrive sets $I_{D1}$, which creates:  \n  $$V_X = V_{DD} - I_{D1}R_{D1}$$\n- **M2** sees $V_{GS2} = V_X$, so it draws $I_{D2}$, setting:  \n  $$V_{out} = V_{DD} - I_{D2}R_{D2}$$\n- **R_F** provides **DC feedback** from $V_{out}$ back to Node 5, helping stabilize the quiescent voltages against PVT variations.\n- The combination of **I_in** (current bias) and **V_b** (voltage bias) allows independent optimization of $g_{m1}$ and $g_{m2}$.\n\n---\n\n## 3. AC / RF Signal Analysis\n\n### Stage 1: M1 (Common-Gate)\n- Gate is AC ground ($V_b$ is DC).\n- Input resistance at Node 5 (looking into M1 source):  \n  $$R_{in,1} \\approx \\frac{1}{g_{m1}}$$\n- The RF current $i_{RF}$ entering Node 5 is passed efficiently to the drain (current gain ≈ 1).\n- Voltage developed at Node X:  \n  $$v_X \\approx g_{m1}v_5 \\cdot R_{D1} \\quad \\text{(positive gain)}$$\n\n### Stage 2: M2 (Common-Source)\n- Driven by $v_X$ at its gate.\n- Voltage gain:  \n  $$v_{out} = -g_{m2}v_X R_{D2}$$\n\n### Open-Loop Gain\nThe cascade of M1 → M2 yields high open-loop voltage gain:\n$$A_{OL} = \\frac{v_{out}}{v_5} \\approx -g_{m1}g_{m2}R_{D1}R_{D2}$$\n\n### Feedback via R_F (Shunt-Shunt)\n- $R_F$ feeds a current back to Node 5:  \n  $$i_f \\approx \\frac{v_{out}}{R_F}$$\n- Because $v_{out}$ is inverted relative to $v_5$, this is **negative feedback**.\n- For high loop gain ($|A_{OL}| \\gg 1$), the closed-loop **transimpedance** is set almost entirely by the passive resistor:\n  $$\\boxed{Z_{CL} = \\frac{v_{out}}{i_{RF}} \\approx -R_F}$$\n\nThis means the circuit acts primarily as a **current-to-voltage converter**: the output voltage is a precise, linear replica of the input RF current scaled by $R_F$.\n\n---\n\n## 4. Key Circuit Properties\n\n| Feature | Explanation |\n|---------|-------------|\n| **Input Impedance** | Low ($\\sim 1/g_{m1}$) due to CG configuration; easy to match to 50 Ω (or set by feedback to $\\approx R_F/A_{OL}$) |\n| **Gain** | Set by $R_F$ (process-independent); high loop gain ensures accuracy |\n| **Bandwidth** | Wideband; feedback extends bandwidth (gain-bandwidth trade-off of shunt-shunt topology) |\n| **Noise** | M1 in CG mode avoids Miller multiplication of $C_{gd}$; M2 provides gain with good noise figure |\n| **DC Stability** | $R_F$ and $I_{in}$ form a feedback bias loop that stabilizes $V_{GS}$ and $V_{DS}$ of both transistors |\n\n---\n\n## 5. Conclusion\n\nThis is a **resistor-feedback, two-stage RF amplifier** (CG + CS) designed for **broadband operation**. \n\n- **M1** provides a low-impedance RF input port and passes current to Node X.\n- **M2** provides high voltage gain to $V_{out}$.\n- **R_F** closes a shunt-shunt feedback loop that forces $v_{out}/i_{RF} \\approx -R_F$.\n- **I_in** and **V_b** independently set the DC currents of M1 and M2.\n\n**Typical applications:** Wideband LNA, RF transimpedance amplifier, or high-frequency current-sensing amplifier where precise gain (determined by $R_F$ rather than transistor $g_m$) and input impedance matching are required.\n\nIf you need, I can derive the exact small-signal expressions for input impedance $Z_{in}$, noise figure, or the closed-loop bandwidth in terms of $C_{gs}$, $C_{gd}$, and $R_F$.",
        "format": "markdown",
        "sha256": "cabb45f90c778e79e422bda8eeb70c57358cd5faa3c378e78c421e7d58f993f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a transimpedance amplifier. Minor peripheral inaccuracies do not change the essential analysis.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 17149,
        "total_tokens": 19566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 17149,
        "total_tokens": 19566,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, the circuit is a **two-stage CMOS analog/RF amplifier with resistive shunt–shunt feedback**.  \nIt converts an input current (DC bias $I_{in}$ plus an RF signal $i_{RF}$) into an output voltage $V_{out}$. The key blocks are:\n\n| Component | Function |\n|---|---|\n| **$M_1$** | NMOS common-gate (CG) stage; its gate is biased at DC $V_b$, its source is node $B$, and its drain is node $X$. |\n| **$M_2$** | NMOS common-source (CS) stage; its gate is driven by node $X$, its drain is $V_{out}$, source is ground. |\n| **$R_{D1}, R_{D2}$** | Drain load resistors to $V_{DD}$. |\n| **$R_F$** | Feedback resistor connecting $V_{out}$ back to node $B$ (source of $M_1$). |\n| **$I_{in}$** | DC (plus AC) current source injecting $i_{in}$ into node $B$. |\n| **$i_{RF}$** | Label for the RF current component flowing through $R_F$. |\n\n---\n\n### 1. DC Bias Analysis\nSet all capacitors to open and AC sources to zero ($v_b=0$, $i_{in}=I_{DC}$). Assume both MOSFETs are in saturation ($\\lambda\\approx 0$, i.e. $r_o\\to\\infty$ for simplicity).\n\n**Node $X$ (drain of $M_1$ / gate of $M_2$):**\n$$I_{D1} = \\frac{V_{DD}-V_X}{R_{D1}}$$\n\n**Node $V_{out}$ (drain of $M_2$):**\n$$I_{D2} = \\frac{V_{DD}-V_{out}}{R_{D2}}$$\n\n**Node $B$ (source of $M_1$):**\n$$I_{in} = I_{D1} + \\frac{V_{out}-V_B}{R_F}$$\n\n**Transistor equations (square-law):**\n$$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_b - V_B - V_{th1})^2$$\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_X - V_{th2})^2$$\n\nThese four equations determine the quiescent points $V_B$, $V_X$, $V_{out}$, and the drain currents. Because $M_2$’s gate draws no DC current, $R_{D1}$ carries exactly $I_{D1}$.\n\n---\n\n### 2. Small-Signal (AC/RF) Model\nReplace DC sources with AC grounds ($V_{DD}\\to 0$, $V_b\\to 0$, $I_{in}\\to i_{in}$). Let lowercase letters be small-signal quantities.\n\n**Equivalent stages:**\n- **$M_1$ (CG):** $v_{gs1} = -v_B$, so its drain current is $i_{d1} = g_{m1}v_{gs1} = -g_{m1}v_B$.\n- **$M_2$ (CS):** $v_{gs2} = v_X$, so $i_{d2} = g_{m2}v_X$.\n\nBecause $r_o\\to\\infty$, the current entering $M_1$’s source equals $-i_{d1}$.\n\n**KCL at the three key nodes** gives the linear system:\n\n1. **Node $B$:**  \n   $$i_{in} + \\frac{v_{out}-v_B}{R_F} + g_{m1}v_B = 0 \\tag{1}$$\n\n2. **Node $X$:**  \n   $$v_X = -i_{d1}R_{D1} = -g_{m1}R_{D1}v_B \\tag{2}$$\n\n3. **Node $V_{out}$:**  \n   $$-\\frac{v_{out}}{R_{D2}} + g_{m2}v_X + \\frac{v_B-v_{out}}{R_F} = 0 \\tag{3}$$\n\n---\n\n### 3. Open-Loop Gain (feedback removed, $R_F\\to\\infty$)\nWith $R_F$ open, $i_{in}$ forces $M_1$’s source current:\n$$v_B = -\\frac{i_{in}}{g_{m1}},\\qquad v_X = i_{in}R_{D1},\\qquad v_{out} = -g_{m2}R_{D2}v_X$$\n\nHence the **open-loop transresistance** is:\n$$\\boxed{A_{OL} \\equiv \\frac{v_{out}}{i_{in}}\\Big|_{R_F=\\infty} = -g_{m2}R_{D1}R_{D2}}$$\n\nThe negative sign indicates that an increase in input current lowers $V_{out}$ (two inversions: CG stage inverts current→voltage at $X$, CS stage inverts voltage→current at $V_{out}$).\n\n---\n\n### 4. Closed-Loop Gain with $R_F$\nUsing (1)–(3) and solving for $v_{out}/i_{in}$ yields:\n$$\\frac{v_{out}}{i_{in}} = \\frac{-g_{m2}R_{D1}R_{D2}}{1 + \\dfrac{g_{m2}R_{D1}R_{D2}}{R_F}} \\tag{4}$$\n\nThis is classic **shunt–shunt (current–voltage) negative feedback**:\n- **Feedback factor:** $\\beta = 1/R_F$ (feedback current per unit output voltage).\n- **Loop gain:** $L = |A_{OL}|\\beta = g_{m2}R_{D1}R_{D2}/R_F$.\n\nIf the design achieves **high loop gain** ($L \\gg 1$):\n$$\\boxed{v_{out} \\approx -R_F \\, i_{in}} \\tag{5}$$\n\nThus the RF current $i_{RF}$ (the AC part of $i_{in}$) produces:\n$$\\boxed{v_{out,RF} \\approx -R_F \\, i_{RF}}$$\n\nThe closed-loop **transresistance gain is set almost entirely by the feedback resistor $R_F$**, making it robust against transistor parameter variations (an important property for RF circuits).\n\nThe current labeled $i_{RF}$ in the diagram is precisely the AC current through $R_F$:\n$$i_{RF} = \\frac{v_{out}-v_B}{R_F} \\approx \\frac{v_{out}}{R_F} \\approx -i_{in}$$\n\n---\n\n### 5. Input and Output Impedances\n\n**Input resistance at node $B$** (looking into $M_1$ source):\n$$R_{in,ol} \\approx \\frac{1}{g_{m1}}$$\n\nWith shunt feedback, $R_{in}$ is reduced by $(1+L)$:\n$$\\boxed{R_{in,cl} \\approx \\frac{1}{g_{m1}(1+L)}}$$\nThis very low input impedance is ideal for summing the input current $i_{in}$ with the feedback current.\n\n**Output resistance** at $V_{out}$:\n$$R_{out,ol} \\approx R_{D2}$$\nWith shunt (voltage-sensing) feedback:\n$$\\boxed{R_{out,cl} \\approx \\frac{R_{D2}}{1+L}}$$\n\n---\n\n### 6. Physical Interpretation / Function\n- **DC:** $I_{in}$ biases both transistors. $V_b$ sets $M_1$’s $V_{GS}$, and $R_{D1}$ converts $I_{D1}$ to $V_X$.\n- **AC (RF):** $M_1$ acts as a **low-impedance current buffer** (CG stage). $M_2$ provides voltage gain. $R_F$ feeds back a current proportional to $V_{out}$. Because the loop gain is large, the **overall transfer function collapses to $-R_F$**, turning the circuit into a **wideband transimpedance amplifier (TIA)** or **current-to-voltage converter**.\n- The label **$i_{RF}$** highlights that the feedback path carries the RF signal current; indeed $i_{RF} \\approx -i_{in}$ when $L\\gg 1$.\n\n---\n\n### Summary of Key Equations\n| Quantity | Expression (approx., $r_o=\\infty$) |\n|---|---|\n| Open-loop gain $A_{OL}$ | $-g_{m2}R_{D1}R_{D2}$ |\n| Closed-loop gain $A_{CL}$ | $\\dfrac{-g_{m2}R_{D1}R_{D2}}{1+L}$ |\n| High-gain limit ($L\\gg 1$) | $\\approx -R_F$ |\n| Loop gain $L$ | $g_{m2}R_{D1}R_{D2}/R_F$ |\n| Input resistance $R_{in,cl}$ | $\\approx [g_{m1}(1+L)]^{-1}$ |\n| Output resistance $R_{out,cl}$ | $\\approx R_{D2}/(1+L)$ |\n\nIf channel-length modulation ($r_o$) is retained, $R_{D1}$ and $R_{D2}$ are replaced by effective resistances $R_{D1}\\parallel r_{o1}$ and $R_{D2}\\parallel r_{o2}$, and small corrections ($\\approx 1/g_m r_o$) appear, but the feedback behavior and the dominant result $v_{out}\\approx -R_F i_{RF}$ remain unchanged.",
        "format": "markdown",
        "sha256": "ccbd8e7b4e2b7cfc98acbf5df386ace9387af1c530dac93df54911689a205ead"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 35810,
        "total_tokens": 38227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2417,
        "output_tokens": 35810,
        "total_tokens": 38227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, the circuit is a **two-transistor feedback loop** built around two ideal DC current sources ($I_1$ and $I_{in}$) and a common intermediate node $V_X$ (the lower dot).  \nThe standard interpretation of the drawing is:\n\n| Transistor | Type (arrow) | Terminals |\n|------------|--------------|-----------|\n| $M_1$ | **NMOS** | Drain = $V_{out}$, Source = $V_X$, Gate = $V_b$ (bias) |\n| $M_2$ | **PMOS** | Source = $V_{DD}$, Drain = $V_X$, Gate = $V_{out}$ |\n\nThe unlabeled current source to ground at $V_X$ is a DC bias current (call it $I_0$); $I_{in}$ injects an input current into $V_X$.\n\nBelow is a systematic analysis: DC operating point, small-signal model, feedback polarity, and output resistance.\n\n---\n\n## 1. DC Operating Point\n\n### Node $V_X$\nKCL at $V_X$ (all DC currents entering the node):\n\n$$I_{D2} + I_{in} = I_{D1} + I_0$$\n\nwhere $I_{D1}, I_{D2}$ are the drain currents of $M_1, M_2$.\n\n### Transistor $M_1$ (NMOS, cascode/mirror device)\nIf it operates in saturation:\n\n$$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 \\left(V_{GS1}-V_{thn}\\right)^2$$\n\nwith\n\n$$V_{GS1} = V_b - V_X$$\n\nSo for a given bias $V_b$ and current $I_{D1}$, the source node is fixed at:\n\n$$V_X = V_b - V_{GS1}(I_{D1})$$\n\n### Transistor $M_2$ (PMOS, feedback device)\nOperating in saturation with source at $V_{DD}$ and gate at $V_{out}$:\n\n$$I_{D2} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left(V_{SG2}-|V_{thp}|\\right)^2$$\n\nwith\n\n$$V_{SG2} = V_{DD} - V_{out}$$\n\n### Node $V_{out}$\n$V_{out}$ is driven by the ideal current source $I_1$:\n\n$$I_1 = I_{D1} + I_{load}$$\n\nIf the external load is open ($I_{load}=0$), then $I_{D1}=I_1$ exactly, and $V_{out}$ is set by the load resistance $R_L$ via $V_{out}=V_{DD}-I_1 R_L$ (or by $M_2$’s $I_{D2}$ if $I_1$ and $M_2$ share the node).\n\n**Key DC insight:** $V_b$ fixes $V_{GS1}$ for a given $I_{D1}$. $V_{out}$ fixes $V_{SG2}$ for $I_{D2}$. The two transistors are coupled **only through $V_X$**, creating a feedback loop.\n\n---\n\n## 2. Small-Signal Model (AC Analysis)\n\nTo find the output resistance $R_{out}$ seen at $V_{out}$, we deactivate all DC current sources ($I_1, I_{in}, I_0$ become open circuits) and apply a test voltage $v_{test}$ at $V_{out}$.\n\nThe small-signal equivalents are:\n* $M_1$: $g_{m1}$, $r_{o1}$; gate is AC ground ($V_b$ = DC) $\\Rightarrow v_{gs1}=-v_X$.\n* $M_2$: $g_{m2}$, $r_{o2}$; source is AC ground ($V_{DD}$) $\\Rightarrow v_{gs2}=v_{out}$.\n\n### KCL at the floating node $V_X$\nOnly $M_1$ (source terminal) and $M_2$ (drain terminal) connect to $V_X$; therefore the AC currents through them must match:\n\n$$i_{d2} = i_{d1}$$\n\nUsing the unified small-signal model ($i_d = g_m v_{gs} + v_{ds}/r_o$):\n\n* For $M_2$ (PMOS, $v_{gs2}=v_{out}$, $v_d=v_X$, $v_s=0$):\n  $$i_{d2} = g_{m2}v_{out} + \\frac{v_X}{r_{o2}}$$\n\n* For $M_1$ (NMOS, $v_{gs1}=-v_X$, $v_d=v_{out}$, $v_s=v_X$):\n  $$i_{d1} = -g_{m1}v_X + \\frac{v_{out}-v_X}{r_{o1}}$$\n\nEquating them:\n\n$$g_{m2}v_{out}+\\frac{v_X}{r_{o2}} = -g_{m1}v_X + \\frac{v_{out}-v_X}{r_{o1}}$$\n\nSolving for $v_X$ (assuming $g_{m}r_o \\gg 1$):\n\n$$\\boxed{v_X \\approx v_{out}\\,\\frac{g_{m2}}{g_{m1}}}$$\n\n### KCL at $V_{out}$\nThe external test current $i_{test}$ enters $V_{out}$; $I_1$ is open. The only AC path is through $M_1$:\n\n$$i_{test} = i_{d1}$$\n\nSubstitute $v_X \\approx v_{out}g_{m2}/g_{m1}$ into $i_{d1}$:\n\n$$i_{test} \\approx -g_{m1}v_X + \\frac{v_{out}}{r_{o1}}\n      \\approx -g_{m2}v_{out} + \\frac{v_{out}}{r_{o1}}$$\n\nBecause $g_{m2} \\gg 1/r_{o1}$ in typical designs, the dominant term is $-g_{m2}v_{out}$. The minus sign is cancelled by the definition of current direction; physically **$M_1$ draws more current from $V_{out}$ as $v_{out}$ rises**.\n\nThus:\n\n$$\\boxed{R_{out} = \\frac{v_{out}}{i_{test}} \\approx \\frac{1}{g_{m2}}}$$\n\nMore precisely, including $r_{o1}$ and $r_{o2}$:\n\n$$R_{out} \\approx \\frac{1}{g_{m2} + 1/r_{o1}} \\approx \\frac{1}{g_{m2}} \\quad (\\text{when } g_{m2}r_{o1}\\gg 1)$$\n\n---\n\n## 3. Feedback Analysis\n\nThe loop is:\n\n$$v_{out} \\;\\xrightarrow{M_2}\\; v_X \\;\\xrightarrow{M_1}\\; i_{D1} \\;\\rightarrow\\; v_{out}$$\n\n* **Polarity:**  \n  $v_{out} \\uparrow \\Rightarrow V_{SG2} \\downarrow \\Rightarrow I_{D2} \\downarrow \\Rightarrow v_X \\downarrow \\Rightarrow V_{GS1} \\uparrow \\Rightarrow I_{D1} \\uparrow$.\n\n  $M_1$ sinks **more** current from $V_{out}$, pulling $v_{out}$ back down.\n\n* **Nature:** **Negative feedback** (shunt-type). It actively regulates $V_{out}$.\n\n* **Effect:** It **lowers** the output impedance from the intrinsic $r_{o1}$ (which would be $\\approx \\infty$ if $I_1$ is ideal and $M_2$ is absent) down to $\\approx 1/g_{m2}$. This is the classic behavior of a **transresistance (current-to-voltage) feedback stage**: $V_{out}$ is made “stiff” against load variations.\n\n* **Loop Gain:** Roughly $g_{m2}/g_{m1} \\times g_{m1}r_{o1} = g_{m2}r_{o1}$. For stability we need $|A\\beta| < 1$ or adequate phase margin; if $g_{m2}$ is too large the loop can become unstable (the approximation breaks down and $R_{out}$ can turn negative).\n\n---\n\n## 4. Functional Summary\n\n| Element | Function |\n|---------|----------|\n| $I_1$ | DC bias; establishes quiescent $V_{out}$ and provides high intrinsic impedance. |\n| $M_1$ (NMOS, $V_b$) | Controlled current sink; its $V_{GS}$ is set by $V_X$. |\n| $M_2$ (PMOS, $G=V_{out}$) | Feedback sensor; converts $V_{out}$ variations into $V_X$ variations. |\n| $I_{in}, I_0$ | Input and bias currents that determine the DC level of $V_X$. |\n\n**Overall behavior:**\n* **DC:** The circuit establishes a DC operating point where $I_{D1} \\approx I_1$ (if unloaded) and $V_X$ is set by the balance of $I_{in}, I_0, I_{D1}, I_{D2}$.\n* **AC / Small-signal:** The feedback through $M_2$ makes the output node $V_{out}$ present a low resistance $R_{out} \\approx 1/g_{m2}$ to any load variations. Thus $V_{out}$ behaves as a **regulated low-impedance voltage node**, despite being biased by a current source $I_1$.\n\n---\n\n## 5. Design Implications\n\n* **Output resistance:** To make $V_{out}$ robust (low $R_{out}$), design $M_2$ with high $g_{m2}$ (wide transistor, high $I_{D2}$).\n* **Headroom:** $M_1$ needs $V_{DS1} \\ge V_{GS1}-V_{thn}$; $M_2$ needs $V_{SD2} \\ge V_{SG2}-|V_{thp}|$. The minimum $V_{DD}$ is therefore $V_{out} + V_{DS,sat1} + V_{X}$.\n* **If $M_2$ is removed** ($g_{m2} \\to 0$): The feedback disappears and $R_{out} \\to r_{o1} \\parallel \\infty = r_{o1}$, i.e. a high-impedance current-source output.\n* **If $V_b$ is adjusted:** Changing $V_b$ changes $I_{D1}$ and therefore shifts the DC value of $V_X$ and $V_{out}$.\n\n---\n\n### Bottom Line\nThis is a **feedback-regulated current-source output stage** (or active-load/transresistance cell). $M_1$ and $M_2$ form a negative-feedback loop around $V_{out}$ via the common node $V_X$. The loop fixes $I_{D1} \\approx I_1$ at DC, but for AC signals it lowers the output resistance to approximately $1/g_{m2}$, turning $V_{out}$ into a stiff, load-insensitive voltage node.",
        "format": "markdown",
        "sha256": "e2ba6ff6d694627dd4367cce9fcfa4aad1ee325d427123c5605c8a66cc2bc243"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the NMOS input branch and PMOS feedback path to the input node, and gives the key transresistance interpretation and Rout ≈ 1/gm2. The small-signal sign/algebra and some peripheral claims are flawed, but do not overturn the essential result.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 41376,
        "total_tokens": 43689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 41376,
        "total_tokens": 43689,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Below is a systematic analysis of the circuit.  I first identify the devices and their connections, then treat DC biasing and—most importantly—derive the small‑signal (AC) behavior, because the figure contains ideal DC current sources ($I_1$, $I_\\mathrm{in}$ and the unlabeled bottom source) that become open circuits for AC analysis.\n\n---\n\n## 1. Circuit identification\n\n| Component | Connections (as drawn) | Type / Role |\n|---|---|---|\n| **$V_{DD}$** | Top rail (AC ground) | Supply |\n| **$I_1$** | Between $V_{DD}$ and node $V_\\mathrm{out}$ | Ideal DC current source (AC: open) |\n| **$M_2$** | Source $\\to V_{DD}$; Drain $\\to$ node **B**; Gate $\\to V_\\mathrm{out}$ | **PMOS** (arrow on source points away from channel) |\n| **$M_1$** | Source $\\to$ node **B**; Drain $\\to V_\\mathrm{out}$; Gate $\\to V_b$ (DC bias) | **NMOS** (arrow on source points toward channel); body is at ground $\\Rightarrow$ **body effect** $g_{mb1}$ applies |\n| **Node B** | Joined to: drain of $M_2$, source of $M_1$, current $I_\\mathrm{in}$ (up from ground), and an unlabeled DC current sink (down to ground) | Internal / input node |\n| **$V_\\mathrm{out}$** | Open output terminal; also connected to $I_1$ and to gate of $M_2$ | Output node |\n| **$V_b$** | DC bias voltage (AC ground) | Sets $I_{D1}$ |\n\n**Small‑signal conventions**\n- $v_o \\equiv$ small‑signal voltage at $V_\\mathrm{out}$\n- $v_b \\equiv$ small‑signal voltage at node **B**\n- $i_\\mathrm{in} \\equiv$ small‑signal current of source $I_\\mathrm{in}$\n- $g_{m1}, r_{o1}, g_{mb1}$ for $M_1$; $g_{m2}, r_{o2}$ for $M_2$.\n\n---\n\n## 2. DC operating point (brief)\n\nAssume both transistors are saturated.\n\n- Because $I_1$ is ideal and the external load at $V_\\mathrm{out}$ is open,\n  $$I_{D1}=I_1 .$$\n- $V_b$ is chosen so that $M_1$ carries $I_1$:\n  $$V_{GS1}=V_b-V_B = V_{thn}+\\sqrt{\\frac{2I_1}{\\mu_n C_{ox}(W/L)_1}} .$$\n- $M_2$ supplies the current needed at node **B**:\n  $$I_{D2}+I_\\mathrm{in}=I_\\mathrm{bias} \\quad (\\text{KCL at B}).$$\n\nThe DC values are not needed for the small‑signal gain, but they fix $g_{m1}$ and $g_{m2}$.\n\n---\n\n## 3. Small‑signal equivalent\n\nReplace all DC sources by open circuits:\n- $I_1 \\to$ open $\\;\\Rightarrow\\;$ **no small‑signal current can flow through $M_1$’s drain**.\n- $I_\\mathrm{bias} \\to$ open.\n- $V_{DD}$ and $V_b$ become AC grounds.\n\nThe resulting AC network is:\n\n- **$M_1$ (NMOS)**: controlled source $g_{m1}v_{gs1}+g_{mb1}v_{bs1}$ in parallel with $r_{o1}$ between $v_o$ and $v_b$.\n  $$v_{gs1}=-v_b,\\qquad v_{bs1}=-v_b \\;\\Rightarrow\\; i_{d1}=-(g_{m1}+g_{mb1})v_b+\\frac{v_o-v_b}{r_{o1}} .$$\n- **$M_2$ (PMOS)**: source grounded (AC), so $v_{gs2}=v_o$. Between $v_b$ and ground:\n  $$i_{d2}=g_{m2}v_o+\\frac{v_b}{r_{o2}} .$$\n\nBecause $V_\\mathrm{out}$ is open, KCL at $v_o$ forces\n$$\\boxed{i_{d1}=0} .$$\n\nThis is the **critical simplification**: $M_1$ carries *zero* AC current; it only imposes a voltage relationship between $v_o$ and $v_b$.\n\n---\n\n## 4. Derivation of $v_o/i_\\mathrm{in}$\n\n### Step A – Relation imposed by $M_1$ ($i_{d1}=0$)\n\n$$-(g_{m1}+g_{mb1})v_b+\\frac{v_o-v_b}{r_{o1}}=0$$\n\n$$\\Rightarrow\\quad v_o = \\bigl[1+(g_{m1}+g_{mb1})r_{o1}\\bigr]v_b . \\tag{1}$$\n\nIf channel‑length modulation is neglected ($r_{o1}\\!\\to\\!\\infty$) the bracket diverges; together with $i_{d1}=0$ this simply means\n\n$$\\boxed{v_b = 0} \\qquad (r_o\\!\\to\\!\\infty).$$\n\nSo **node B is a virtual AC ground**.\n\n### Step B – KCL at node B\n\nThe only currents entering node **B** are $i_\\mathrm{in}$ and $i_{d2}$ (since $i_{s1}=-i_{d1}=0$):\n\n$$i_\\mathrm{in}+i_{d2}=0 \\;\\Rightarrow\\; i_{d2}=-i_\\mathrm{in}. \\tag{2}$$\n\nUsing the $M_2$ model:\n\n$$g_{m2}v_o+\\frac{v_b}{r_{o2}}=-i_\\mathrm{in}. \\tag{3}$$\n\n### Step C – Solve\n\nInsert (1) into (3):\n\n$$g_{m2}v_o+\\frac{v_o}{r_{o2}\\bigl[1+(g_{m1}+g_{mb1})r_{o1}\\bigr]}=-i_\\mathrm{in}.$$\n\nHence the **exact small‑signal transimpedance** is\n\n$$\\boxed{ \\frac{v_o}{i_\\mathrm{in}} = \n- \\frac{1}{\\displaystyle g_{m2}+\\frac{1}{r_{o2}\\bigl[1+(g_{m1}+g_{mb1})r_{o1}\\bigr]} } . }$$\n\nBecause $g_m r_o \\gg 1$ in practice, the second term in the denominator is tiny:\n\n$$\\boxed{ \\frac{v_o}{i_\\mathrm{in}} \\approx -\\frac{1}{g_{m2}} }. \\tag{4}$$\n\n---\n\n## 5. Input and output resistances\n\n### Input resistance at node B\n$$R_\\mathrm{in}=\\frac{v_b}{i_\\mathrm{in}}.$$\n\nUsing $v_b=0$ (or Eq. (1)) with (4):\n\n$$\\boxed{R_\\mathrm{in}\\approx 0} \\qquad (\\text{virtual ground}).$$\n\nMore precisely, with finite $r_o$:\n\n$$R_\\mathrm{in}\\approx -\\frac{1}{g_{m2}(g_{m1}+g_{mb1})r_{o1}} \\;\\;\\text{(very small)}.$$\n\n### Output resistance $R_\\mathrm{out}$ (looking into $V_\\mathrm{out}$, $i_\\mathrm{in}=0$)\nApply a test voltage $v_t$ at $V_\\mathrm{out}$; find the current $i_t=i_{d1}$ entering the node.\n\nFrom Eq. (1) with $i_{d1}=i_{d2}$ and solving gives, to leading order,\n\n$$\\boxed{R_\\mathrm{out}=\\frac{v_o}{i_t}\\approx \\frac{1}{g_{m2}}}. \\tag{5}$$\n\nSo the circuit presents a **low resistance** ($\\sim 1/g_m$) at both the internal node B and the output node.\n\n---\n\n## 6. Physical interpretation\n\n| Feature | What happens |\n|---|---|\n| **$M_1$ (NMOS, common‑gate)** | Its drain is open for AC, so $i_{d1}=0$. That forces its source (node **B**) to sit at AC ground ($v_b=0$) and makes $M_1$ act as a “voltage‑tracking” element with gain $\\approx g_{m1}r_{o1}$. |\n| **$M_2$ (PMOS, common‑source)** | Its gate is the output; it senses $v_o$ and injects a drain current $i_{d2}=g_{m2}v_o$ into node **B**. |\n| **Feedback / cancellation** | The input current $i_\\mathrm{in}$ must be cancelled by $M_2$: $i_{d2}=-i_\\mathrm{in}$. Therefore $v_o$ adjusts to exactly $-i_\\mathrm{in}/g_{m2}$. |\n| **Overall function** | The stage is a **transimpedance (current‑to‑voltage) amplifier**: a current $i_\\mathrm{in}$ injected at node B produces a proportional voltage $v_o$ with gain $\\approx -1/g_{m2}$. |\n\nIf one includes finite $r_o$’s and the body effect ($g_{mb1}$), the corrections are of order $1/(g_m r_o)$ and do not change the dominant behavior: **gain $\\approx -1/g_{m2}$**, **input node B is virtual ground**, and **output resistance $\\approx 1/g_{m2}$**.\n\n---\n\n## 7. Summary of key results\n\n$$\n\\boxed{\n\\begin{aligned}\n\\text{Small‑signal gain:} \\quad & v_o/i_\\mathrm{in} \\approx -1/g_{m2} \\\\[4pt]\n\\text{Node B voltage:} \\quad & v_b \\approx 0 \\;\\;(\\text{virtual ground})\\\\[4pt]\n\\text{Input resistance:} \\quad & R_\\mathrm{in} \\approx 0\\\\[4pt]\n\\text{Output resistance:} \\quad & R_\\mathrm{out} \\approx 1/g_{m2}\n\\end{aligned}\n}\n$$\n\n**Bottom line:** The circuit converts the input current $I_\\mathrm{in}$ into an output voltage $V_\\mathrm{out}$ via the active feedback transistor $M_2$; $M_1$ enforces a virtual ground at the internal node B because its drain current must be zero (ideal current source $I_1$). The gain is set almost entirely by the inverse transconductance of the PMOS device $M_2$.",
        "format": "markdown",
        "sha256": "85892bf9cb449ada657a61bc8ca0c36c6869359d48bdede714fc2f51c5d5336d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device, describes feedback from the output to the input node, and gives the expected low input resistance and transimpedance/output-resistance magnitudes. Sign and small-signal modeling details do not change the core result.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4626,
        "output_tokens": 56042,
        "total_tokens": 60668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47107,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 28356,
        "total_tokens": 30669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22611,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This schematic is a **two-transistor MOS feedback/current-source core** with three ideal DC current sources.  The key nodes are:\n\n* **V<sub>DD</sub>** – positive supply  \n* **V<sub>out</sub>** – output node (also the drain of M₁ and, via the horizontal line, the gate of M₂)  \n* **V<sub>A</sub>** – common “lower” node shared by the source of M₁, the drain/gate terminal of M₂, the up-arrow source **I<sub>in</sub>**, and the down-arrow source **I<sub>bias</sub>** (the unlabeled right-hand source).  \n* **V<sub>b</sub>** – external DC bias voltage on the gate of M₁.\n\nBased on the arrow directions and standard analog-IC notation, the transistors are:\n\n| Transistor | Type (inferred) | Source / Drain / Gate connections |\n|------------|----------------|-----------------------------------|\n| **M₁** | NMOS | Drain = **V<sub>out</sub>**, Source = **V<sub>A</sub>**, Gate = **V<sub>b</sub>** |\n| **M₂** | PMOS | Source = **V<sub>DD</sub>**, Drain = **V<sub>out</sub>**, Gate = **V<sub>A</sub>** |\n\nThe current-source **I₁** is connected in parallel with M₂ between V<sub>DD</sub> and V<sub>out</sub>.\n\n---\n\n## 1. DC Analysis (KCL + Square-Law)\n\n### Node V<sub>A</sub>\nOnly M₁ delivers current to this node (from V<sub>out</sub>); the two ground-referenced sources inject/sink:\n\n\\[\nI_{D1} + I_{\\text{in}} = I_{\\text{bias}} \\quad\\Longrightarrow\\quad \\boxed{I_{D1} = I_{\\text{bias}} - I_{\\text{in}}}\n\\]\n\n**Result:** The drain current of M₁ is *set entirely by the external current sources* at node A; it does **not** depend on V<sub>b</sub> directly, but V<sub>b</sub> must be chosen so that M₁ operates in saturation with this current.\n\n### Node V<sub>out</sub>\nBoth I₁ and M₂ push current into V<sub>out</sub>; M₁ pulls current down to V<sub>A</sub>:\n\n\\[\nI_1 + I_{D2} = I_{D1} \\quad\\Longrightarrow\\quad \\boxed{I_{D2} = I_{D1} - I_1}\n\\]\n\nThus M₂’s current is also fixed once I₁ and the bottom sources are known.\n\n### Transistor equations (saturation)\n\n**M₁ (NMOS):**\n\\[\nI_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{GS1}-V_{thn})^2\\bigl(1+\\lambda_n V_{DS1}\\bigr)\n\\]\nwith\n\\[\nV_{GS1} = V_b - V_A ,\\qquad V_{DS1} = V_{out} - V_A .\n\\]\n\n**M₂ (PMOS):**\n\\[\nI_{D2} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{SG2}-|V_{thp}|)^2\\bigl(1+\\lambda_p V_{SD2}\\bigr)\n\\]\nwith\n\\[\nV_{SG2} = V_{DD} - V_A ,\\qquad V_{SD2} = V_{DD} - V_{out} .\n\\]\n\n### Solving the operating point\n\n1. From **I<sub>D1</sub>** (known) and **V<sub>b</sub>**, solve for **V<sub>A</sub>** using M₁’s V<sub>GS</sub> equation:\n   \\[\n   V_A = V_b - V_{GS1}(I_{D1})\n   \\]\n\n2. From **I<sub>D2</sub>** (known) and **V<sub>SG2</sub>** (known because V<sub>A</sub> is now known), solve for **V<sub>SD2</sub>** using M₂’s equation.\n\n3. The output voltage is:\n   \\[\n   \\boxed{V_{out} = V_{DD} - V_{SD2}(I_{D2},V_A)}\n   \\]\n\nBecause M₂’s **gate is driven by V<sub>A</sub>** (the source voltage of M₁), the circuit contains an **internal feedback loop**: any change in V<sub>out</sub> changes V<sub>A</sub> via M₁, which in turn changes M₂’s current, feeding back to V<sub>out</sub>.\n\n---\n\n## 2. Small-Signal (AC) Analysis – Output Resistance\n\nTo find the small-signal resistance seen at **V<sub>out</sub>**, open all DC current sources (I₁, I<sub>in</sub>, I<sub>bias</sub>) and apply a test voltage **v<sub>out</sub>**.\n\n* **M₁:** Gate is AC ground (V<sub>b</sub> fixed), source is node **v<sub>A</sub>**, drain is **v<sub>out</sub>** → common-gate stage.\n* **M₂:** Source is AC ground (V<sub>DD</sub>), gate is **v<sub>A</sub>**, drain is **v<sub>out</sub>** → common-source stage controlled by v<sub>A</sub>.\n\n### KCL at node V<sub>A</sub>\nBecause I<sub>in</sub> and I<sub>bias</sub> are open, the only path from v<sub>A</sub> is through M₁ to v<sub>out</sub>. Hence the small-signal current through M₁’s branch is zero at node A, giving:\n\n\\[\nv_A = \\frac{v_{out}}{1+g_{m1}r_{o1}}\n\\]\n\n### KCL at v<sub>out</sub>\nUsing the small-signal models (g<sub>m</sub>, r<sub>o</sub> for each transistor):\n\n\\[\ni_{test} = \\underbrace{\\frac{v_{out}-v_A}{r_{o1}} + g_{m1}(-v_A)}_{\\text{M}_1\\ \\text{branch}} \n          + \\underbrace{\\frac{v_{out}}{r_{o2}} + g_{m2}(-v_A)}_{\\text{M}_2\\ \\text{branch}}\n\\]\n\nSubstituting v<sub>A</sub> = v<sub>out</sub>/(1+g<sub>m1</sub>r<sub>o1</sub>) and collecting terms yields the conductance:\n\n\\[\n\\frac{i_{test}}{v_{out}} = \\frac{1}{r_{o2}} + \\frac{g_{m2}}{1+g_{m1}r_{o1}}\n\\]\n\nTherefore the **output resistance** is:\n\n\\[\n\\boxed{R_{out} = \\left[ \\frac{1}{r_{o2}} + \\frac{g_{m2}}{1+g_{m1}r_{o1}} \\right]^{-1}}\n\\]\n\n### Physical interpretation\nBecause **g<sub>m1</sub>r<sub>o1</sub> ≫ 1**, the second term is usually small unless g<sub>m2</sub> is very large. Thus:\n\n\\[\nR_{out} \\approx \\left( \\frac{1}{r_{o2}} + \\frac{g_{m2}}{g_{m1}r_{o1}} \\right)^{-1} \\lesssim r_{o2}\n\\]\n\nThe feedback path through M₂ (gate = V<sub>A</sub>) acts as a **positive-feedback shunt**: it lowers the output resistance compared with a simple open-circuit load.  If a **high** R<sub>out</sub> is desired, one would either:\n* Make g<sub>m2</sub> → 0 (turn M₂ off, leaving only r<sub>o2</sub>), or\n* Reconfigure so M₂’s gate is tied to a fixed bias (cascode) rather than to V<sub>A</sub>.\n\n---\n\n## 3. Summary of Key Results\n\n| Quantity | Expression / Condition |\n|----------|------------------------|\n| **I<sub>D1</sub>** | I<sub>bias</sub> − I<sub>in</sub> (set by external sources) |\n| **I<sub>D2</sub>** | I<sub>D1</sub> − I<sub>1</sub> |\n| **V<sub>A</sub>** | V<sub>b</sub> − V<sub>GS1</sub>(I<sub>D1</sub>) |\n| **V<sub>out</sub>** | V<sub>DD</sub> − V<sub>SD2</sub>(I<sub>D2</sub>,V<sub>A</sub>) |\n| **Small-signal v<sub>A</sub>** | v<sub>out</sub>/(1+g<sub>m1</sub>r<sub>o1</sub>) |\n| **Output resistance** | [1/r<sub>o2</sub> + g<sub>m2</sub>/(1+g<sub>m1</sub>r<sub>o1</sub>)]<sup>−1</sup> |\n\nIn short, this is a **current-defined, feedback-biased MOS stage**: the DC currents are fixed by the two lower current sources, M₁’s gate V<sub>b</sub> sets the required V<sub>GS</sub> (and thus V<sub>A</sub>), and M₂ translates V<sub>A</sub> back to the output node V<sub>out</sub>, creating a closed-loop DC operating point and a defined (moderate) small-signal output resistance.",
        "format": "markdown",
        "sha256": "0a54a8b5dc7e41bddaae39a2d1a40dd0bfce669d589087351846aa39e93e189e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer swaps M2’s gate and drain connections. In the actual circuit, M2’s gate is driven by Vout and its drain feeds the input node, forming the feedback loop through M1; the candidate instead analyzes a different topology and misses the key current-input feedback behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 32135,
        "total_tokens": 34448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2313,
        "output_tokens": 32135,
        "total_tokens": 34448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: No.** For any finite (but arbitrarily large) value of \\(C_L\\) the ring still oscillates; it just does so more and more slowly. Only in the unphysical limit \\(C_L\\to\\infty\\) does the frequency go to zero.\n\n---\n\n### Why the circuit keeps oscillating\n\nThe figure is a **3‑stage ring oscillator**: three inverting buffers (triangle + bubble) connected in a loop, each driving a load capacitor \\(C_L\\) to ground.\n\n| What \\(C_L\\) changes | What \\(C_L\\) does **not** change |\n|---|---|\n| The **speed** of each stage: the switching time of an inverter is set by its on‑resistance \\(R_{\\text{on}}\\) charging/discharging \\(C_L\\). The delay per stage is \\(\\tau \\approx R_{\\text{on}}C_L\\ln 2\\) (step model) or \\(\\tau = R_{\\text{out}}C_L\\) (small‑signal RC model). | The **DC transfer characteristics** of each inverter. At DC the capacitors are open circuits, so the loop is still three cascaded inverters. |\n\nBecause each stage is inverting, the total DC loop phase is \\(3\\times 180^\\circ = 540^\\circ \\equiv 180^\\circ\\). The loop therefore has a single DC equilibrium at the switching threshold \\(V_{\\text{th}}\\). Whether that equilibrium is stable or not depends on the inverter’s small‑signal gain \\(A_0\\) at \\(V_{\\text{th}}\\):\n\n* Linear analysis around \\(V_{\\text{th}}\\) gives three eigenvalues. For a 3‑stage loop they are unstable (positive real part) **iff** the DC gain satisfies\n  \\[\n  A_0 > 2 .\n  \\]\n  Real CMOS inverters have \\(A_0 \\gg 2\\), so the fixed point is unstable.\n\n* The unstable eigenvalues scale as \\(1/C_L\\):\n  \\[\n  s \\approx \\frac{A_0 e^{\\pm j\\pi/3}-1}{R_{\\text{out}}C_L}.\n  \\]\n  The **growth rate** \\(\\Re(s)\\) is positive but shrinks to 0 as \\(C_L\\to\\infty\\); the **oscillation frequency** is\n  \\[\n  \\omega_{\\text{osc}} \\approx \\frac{\\sqrt{3}}{R_{\\text{out}}C_L}\\;\\;\\propto\\;\\frac{1}{C_L}.\n  \\]\n\nSo as you make the capacitors larger:\n\n* The period \\(T = 2\\pi/\\omega_{\\text{osc}} \\propto C_L\\) grows.\n* The frequency \\(f \\propto 1/C_L\\) drops.\n* But **the circuit remains unstable and continues to cycle** through its high/low states, just with exponentially slower charging/discharging curves.\n\n### The “infinite limit” caveat\n\nIf one literally takes \\(C_L \\to \\infty\\), then \\(dV/dt = I/C_L \\to 0\\) for any finite inverter current. The voltages become frozen, and the system is stuck at the DC operating point \\(V_{\\text{th}}\\). In that strict, unphysical limit oscillation ceases because time stops on the circuit’s scale.\n\nBut “arbitrarily large” in circuit analysis means **as large as we want, but still finite**. For every finite \\(C_L\\)—no matter how huge—the 3‑stage loop satisfies the Barkhausen condition with gain \\(>1\\) at \\(\\omega = \\sqrt{3}/(R_{\\text{out}}C_L)\\), and the circuit oscillates.\n\n---\n\n**Bottom line:** Large load capacitances do **not** kill the oscillation; they only stretch the period. The circuit fails to oscillate only if the inverter gain is too low (\\(A_0<2\\)) or if \\(C_L\\) is literally infinite. For arbitrarily large finite \\(C_L\\), it is still a ring oscillator—just a very slow one.",
        "format": "markdown",
        "sha256": "dc37a190884e5191c4d350c5e8430b059ab5a3340ffa618c96f955f965256317"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that finite, equal capacitive loads slow the three-stage ring without stopping oscillation. Its RC-delay argument gives the correct frequency trend and satisfies the golden full-credit rule; the extra small-signal details are not needed.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 21030,
        "total_tokens": 22233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 21030,
        "total_tokens": 22233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No — making the load capacitors arbitrarily large does not cause the 3‑stage ring to stop oscillating.** It only makes the oscillator run arbitrarily slowly.\n\nHere is why.\n\n### 1. What the circuit is\nThe figure is a 3‑stage ring oscillator (three inverters with feedback) with a load capacitance \\(C_L\\) at each output node. For a ring with an **odd** number of inverting stages the DC loop gain is negative (\\((-A_0)^3\\)), so the unique DC equilibrium is unstable (provided the inverter gain \\(A_0\\) is large enough). The circuit therefore has a stable limit cycle — it oscillates.\n\n### 2. Small‑signal model of one stage\nTreat each inverter around its switching point as a first‑order system:\n\\[\nH(s)=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=\\frac{-A_0}{1+sR_{\\text{out}}C_L}\n\\]\nwhere\n* \\(A_0=g_mR_{\\text{out}}\\) is the DC small‑signal gain (independent of \\(C_L\\)),\n* \\(\\tau \\equiv R_{\\text{out}}C_L\\) is the dominant RC time constant at that node.\n\n### 3. Barkhausen condition for 3 stages\nThe loop transfer function is \\(L(s)=H(s)^3\\). We need a frequency \\(\\omega>0\\) where\n\\[\n\\angle L(j\\omega)=2\\pi, \\qquad |L(j\\omega)|\\ge 1 .\n\\]\n\nFor one stage\n\\[\n\\angle H(j\\omega)=\\pi-\\arctan(\\omega\\tau).\n\\]\nWith 3 stages:\n\\[\n3\\bigl[\\pi-\\arctan(\\omega\\tau)\\bigr]=2\\pi\n\\;\\Longrightarrow\\;\n\\arctan(\\omega\\tau)=\\frac{\\pi}{3}.\n\\]\nHence the critical frequency is\n\\[\n\\omega=\\frac{\\tan(\\pi/3)}{\\tau}=\\frac{\\sqrt{3}}{R_{\\text{out}}C_L}.\n\\]\n\nAt that frequency\n\\[\n|H(j\\omega)|=\\frac{A_0}{\\sqrt{1+(\\omega\\tau)^2}}\n=\\frac{A_0}{\\sqrt{1+3}}=\\frac{A_0}{2}.\n\\]\n\nSo the loop magnitude is\n\\[\n|L(j\\omega)|=\\left(\\frac{A_0}{2}\\right)^3.\n\\]\n\n### 4. The key result: \\(C_L\\) cancels out of the startup test\nThe condition for oscillation is simply\n\\[\n\\left(\\frac{A_0}{2}\\right)^3 \\ge 1 \\;\\;\\Longrightarrow\\;\\; A_0 \\ge 2.\n\\]\nThis depends only on the inverter’s DC gain, **not on \\(C_L\\)**.\n\nBecause \\(\\omega\\tau=\\sqrt{3}\\) always, as \\(C_L\\to\\infty\\) (so \\(\\tau\\to\\infty\\)) the required frequency moves to **zero**:\n\\[\n\\omega \\propto \\frac{1}{C_L}\\;\\;\\to\\;\\;0.\n\\]\n\n### 5. What actually happens physically\nThe propagation delay of each stage is proportional to the RC time constant:\n\\[\nt_d \\approx \\tau\\ln 2 = R_{\\text{out}}C_L\\ln 2.\n\\]\nThe period of the 3‑stage ring is \\(T\\approx 6t_d\\), so\n\\[\nf=\\frac{1}{T}\\propto \\frac{1}{C_L}.\n\\]\n\n* If \\(C_L\\) is finite but very large, the circuit still satisfies \\(|L|>1\\) at its (now very low) operating frequency; it simply takes longer to charge/discharge the huge capacitors.\n* In the **strict limit** \\(C_L\\to\\infty\\) (\\(\\tau\\to\\infty\\)), \\(\\omega\\to 0\\) and \\(T\\to\\infty\\). The dynamics freeze (\\(\\dot v_i\\to 0\\)), so in that idealized infinite limit the waveform becomes a static DC state, but **the failure is not caused by loss of loop gain** — it is merely a frequency collapse to zero.\n\n### Conclusion\nThe three capacitors can become arbitrarily large; the ring does **not** lose its ability to oscillate. The startup condition (\\(A_0>2\\)) is unchanged. The only effect is that the oscillation frequency drops as \\(1/C_L\\) (the period grows linearly with \\(C_L\\)). For any arbitrarily large **finite** \\(C_L\\), the circuit continues to oscillate, just very slowly.",
        "format": "markdown",
        "sha256": "45a4990b60e06f7d22e40554a1f09a183ac39f31a4694db4e1327777a3eb2126"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors at all three nodes do not stop oscillation for any finite capacitance, and its small-signal phase and gain analysis shows the oscillation frequency falls as 1/CL while the gain condition is unchanged. The ideal infinite-capacitance limit caveat does not undermine the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 28842,
        "total_tokens": 30045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 28842,
        "total_tokens": 30045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nNo. Making the three load capacitors arbitrarily large does **not** cause the oscillator to stop; it only makes the oscillation arbitrarily slow (frequency → 0). The circuit still satisfies the conditions needed to oscillate as long as each inverter has a DC gain larger than 2.\n\n---\n\n### Why the circuit keeps oscillating\n\nThe figure is a 3‑stage ring oscillator. Each stage can be modeled (around its switching threshold) as a first‑order inverting amplifier:\n\n\\[\nH(s)=\\frac{-A}{1+s\\tau}, \\qquad \\tau = R_{\\text{out}}C_L\n\\]\n\nwhere \\(A\\) is the inverter’s DC gain and \\(R_{\\text{out}}\\) its output resistance.\n\nBecause the stages are connected in a loop of length 3 (odd), the loop transfer function is\n\n\\[\nL(s)=H(s)^3 = \\left[\\frac{-A}{1+s\\tau}\\right]^3 .\n\\]\n\nThe DC equilibrium \\((v_1,v_2,v_3)=(V_{TH},V_{TH},V_{TH})\\) is unstable if, at the frequency where the total phase shift is \\(360^\\circ\\), the loop gain magnitude exceeds 1.\n\n**Phase condition:**  \nThe phase of one stage is \\(\\pi-\\arctan(\\omega\\tau)\\). For three stages:\n\n\\[\n3\\pi - 3\\arctan(\\omega\\tau) = 2\\pi \\;\\Rightarrow\\; \\arctan(\\omega\\tau)=\\frac{\\pi}{3}\n\\]\n\nso the phase‑crossover occurs at\n\n\\[\n\\omega_c \\tau = \\sqrt{3} \\quad\\Longrightarrow\\quad \\omega_c = \\frac{\\sqrt{3}}{\\tau} = \\frac{\\sqrt{3}}{R_{\\text{out}}C_L}.\n\\]\n\n**Magnitude condition:**  \nAt that frequency\n\n\\[\n|H(j\\omega_c)| = \\frac{A}{\\sqrt{1+(\\omega_c\\tau)^2}} = \\frac{A}{2},\n\\]\n\nso\n\n\\[\n|L(j\\omega_c)| = \\left(\\frac{A}{2}\\right)^3 .\n\\]\n\nOscillation (instability of the DC point, i.e. growth of a periodic mode) requires \\(|L|>1\\):\n\n\\[\n\\left(\\frac{A}{2}\\right)^3 > 1 \\;\\Longrightarrow\\; A > 2 .\n\\]\n\n**Key observation:** The required gain \\(A>2\\) is a property of the **inverter**, not of the load. The load capacitance \\(C_L\\) enters only through the time constant \\(\\tau\\).\n\n- As \\(C_L\\) is made larger, \\(\\tau\\) grows.\n- The crossover frequency \\(\\omega_c \\propto 1/\\tau\\) moves toward DC.\n- The loop gain at that frequency stays \\((A/2)^3\\); if \\(A>2\\) it remains **greater than 1**.\n- Hence the equilibrium is unstable and a limit cycle exists.\n\nThe period of the resulting oscillation scales with the delay per stage, which is proportional to \\(\\tau\\):\n\n\\[\nT \\propto \\tau = R_{\\text{out}}C_L \\;\\;\\Rightarrow\\;\\; f_{\\text{osc}} \\propto \\frac{1}{C_L}.\n\\]\n\nSo as \\(C_L \\to \\infty\\):\n\n\\[\nf_{\\text{osc}} \\to 0, \\qquad T \\to \\infty,\n\\]\n\nbut **for any finite (arbitrarily large) \\(C_L\\) the circuit continues to oscillate**, just more and more slowly.\n\n---\n\n### Bottom line\n\n| What changes with larger \\(C_L\\)? | What stays the same? |\n|---|---|\n| Delay per stage \\(t_d \\uparrow\\) | DC gain \\(A\\) (set by transistor sizes) |\n| Oscillation frequency \\(f \\downarrow\\) | Loop‑gain condition \\(A>2\\) |\n| Period \\(T \\uparrow\\) | Number of stages (3, odd → no stable DC latch) |\n\nTherefore the 3‑stage ring **does not fail** to oscillate when \\(C_L\\) is made arbitrarily large; it merely approaches a “zero‑frequency” limit while remaining a valid oscillator for every finite value of \\(C_L\\). (In the *strict* infinite‑capacitance limit the dynamics freeze, but “arbitrarily large” means finite yet huge, and the oscillation persists.)",
        "format": "markdown",
        "sha256": "8704a750c1eb70c53aeb0300031b17181682988808cabbf629f3346c563e42b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors at all three nodes slow the oscillation without stopping it, and supports this with the small-signal phase and gain condition: the required per-stage gain remains 2 while frequency scales inversely with capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 23866,
        "total_tokens": 25069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21381,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1203,
        "output_tokens": 23866,
        "total_tokens": 25069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21381,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a **3‑stage single‑ended ring oscillator** (output of the third inverter feeds back to the first).  \nEach node has a load capacitance $C_L$ and the inverter currents are set by the transistor sizes, which are **not** changed.\n\n### 1. What happens to the frequency?\nThe delay of one inverter stage is the time needed to charge/discharge $C_L$:\n$$t_d \\;\\approx\\; \\frac{C_L V_{DD}}{I_{D,\\text{sat}}} \\;\\propto\\; C_L$$\nFor $N=3$ stages,\n$$f_0 = \\frac{1}{2N t_d} \\;\\propto\\; \\frac{1}{C_L}$$\nSo **doubling $C_L$ halves the oscillation frequency** ($f_0 \\to f_0/2$).\n\n### 2. What happens to the phase noise?\nUsing Hajimiri’s ISF model, a current impulse $\\Delta q$ injected at a node causes a time shift\n$$\\Delta t = \\frac{\\Delta q}{C_L S} = \\frac{\\Delta q}{I_{D}}$$\nwhere $S=dV/dt$ is the slew rate. Because $S\\propto 1/C_L$, **$\\Delta t$ is independent of $C_L$**.\n\nThe resulting phase shift is $\\Delta\\phi = \\omega_0\\Delta t$, so\n$$\\Delta\\phi \\propto f_0 \\propto \\frac{1}{C_L}$$\n\nThe ISF $\\Gamma(\\phi)$ is a function of normalized phase; because $t_r/T$ stays constant when $C_L$ scales, **$\\Gamma_{\\rm rms}$ does not change**. The transistor thermal noise $S_i=4kT\\gamma g_m$ is also unchanged (sizes/current are fixed).\n\nFor white (thermal) noise the $1/f^2$ phase‑noise is\n$$\\mathcal L(\\Delta f) \\;=\\; \\frac{\\Gamma_{\\rm rms}^2}{8\\pi^2(\\Delta f)^2}\\,\n\\frac{S_i}{(C_L V_{DD})^2}\n\\;\\propto\\; \\frac{1}{C_L^2}$$\n\nSince the dynamic power $P\\approx N C_L V_{DD}^2 f_0$ is constant ($f_0\\propto 1/C_L$), this is the same as\n$$\\boxed{\\;\\mathcal L(\\Delta f)\\;\\propto\\; f_0^2\\;}$$\n\n### Result\nBecause $C_L \\to 2C_L$ gives $f_0 \\to f_0/2$:\n\n* **Phase noise at a given absolute offset $\\Delta f$ decreases by a factor of 4** (improves by **6 dB**).\n* The time‑domain rms jitter $\\sigma_t \\approx \\sqrt{\\int \\mathcal L\\,df}/(2\\pi f_0)$ stays **unchanged**, because $\\sigma_\\phi \\propto f_0$.\n\nIn short: **doubling the three load capacitors halves the frequency and improves (lowers) the $1/f^2$ phase noise by 6 dB.**",
        "format": "markdown",
        "sha256": "75d81a4ce4f1247f1022daeefe979d8f74d6db202cf7a5b4253c5ecd40159f34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed absolute offset, with a valid white-noise scaling argument.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 33134,
        "total_tokens": 34334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 33134,
        "total_tokens": 34334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a 3‑stage CMOS ring oscillator.  Each node has a load capacitance $C_L$ to ground, and with fixed transistor sizes and $V_{DD}$ the inverter delay is set by charging/discharging that capacitance.\n\n### 1.  Oscillation frequency\nFor one stage the switching delay is\n$$t_d \\approx \\frac{C_L V_{DD}}{2I_D}$$\nwhere $I_D$ is the transistor current (constant because $W/L$ and $V_{DD}$ are unchanged).  \nThe oscillation frequency is\n$$f_0 \\approx \\frac{1}{2N t_d} \\;\\propto\\; \\frac{1}{C_L}.$$\n**Doubling $C_L$ therefore halves $f_0$.**\n\n### 2.  Power consumption\nThe dynamic power of the $N=3$ stages is\n$$P \\approx N C_L V_{DD}^2 f_0.$$\nBecause $f_0 \\propto 1/C_L$, the product $C_L f_0$ stays constant, so **$P$ is essentially unchanged**.\n\n### 3.  Phase noise ($1/f^2$ region)\nUsing the impulse‑sensitive‑function (ISF) analysis (or the standard ring‑oscillator result):\n* The phase shift per injected charge is $\\Gamma \\propto f_0/I_D \\propto 1/C_L$.\n* The switching time is $t_r \\propto C_L$, so the RMS of $\\Gamma$ over one period scales as\n  $$\\Gamma_{\\rm rms}^2 \\propto t_r f_0 \\Gamma^2 \\propto \\frac{1}{C_L^2}.$$\n* The thermal noise current is $S_i = 4kT\\gamma g_m$, constant because $g_m$ is set by the unchanged transistor bias.\n\nThe phase‑diffusion constant is $D \\propto \\Gamma_{\\rm rms}^2 S_i$, so\n$$D \\propto \\frac{1}{C_L^2} \\propto f_0^2.$$\n\nSince the phase‑noise PSD at an absolute offset $\\Delta f$ is\n$$\\mathcal{L}(\\Delta f) = \\frac{S_\\phi(\\Delta f)}{2} \\approx \\frac{D}{(\\pi\\Delta f)^2},$$\nwe obtain\n$$\\boxed{\\mathcal{L}(\\Delta f) \\propto f_0^2 \\propto \\frac{1}{C_L^2}}.$$\n\n### Result\nDoubling all three capacitors:\n* $f_0 \\to f_0/2$,\n* $P$ stays the same,\n* $\\mathcal{L}(\\Delta f) \\to \\mathcal{L}(\\Delta f)/4$.\n\n**The phase noise improves by a factor of 4, i.e. by 6 dB (at any fixed absolute frequency offset $\\Delta f$).**\n\n*(Note: If one specifies the offset as a fraction of the carrier, $\\Delta f/f_0 = \\text{const}$, the relative phase noise $\\mathcal{L}$ would stay unchanged; the standard definition uses absolute $\\Delta f$.)*",
        "format": "markdown",
        "sha256": "72989f6c02a92d8ac8222ca4fb6cdf8756e3e600a1681d0906764196e159afd3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at a fixed absolute offset. The ISF explanation supports the result, and the fixed-relative-offset qualification is correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 36099,
        "total_tokens": 37299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 36099,
        "total_tokens": 37299,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the three load capacitors **halves the oscillation frequency** and **lowers the phase noise by 6 dB (a factor of 4)** at a given offset.\n\n### Why?\n\n1. **Delay and frequency scale with \\(C_L\\).**  \n   Each inverter’s delay is roughly  \n   \\[\n   t_d \\approx \\frac{C_L V_{DD}}{I_D},\n   \\]\n   where \\(I_D\\) is the transistor’s saturation current (unchanged because the transistor sizes and supply are fixed). For the 3‑stage ring,\n   \\[\n   f_0 = \\frac{1}{2N t_d} \\propto \\frac{1}{C_L}\\;\\;\\Rightarrow\\;\\; f_0 \\to \\frac{f_0}{2}.\n   \\]\n\n2. **Power stays essentially constant.**  \n   The dynamic energy per cycle per node is \\(C_L V_{DD}^2\\), so total power is\n   \\[\n   P \\approx N C_L V_{DD}^2 f_0.\n   \\]\n   Because \\(f_0 \\propto 1/C_L\\), the product \\(C_L f_0\\) is constant; therefore \\(P\\) does not change.\n\n3. **Phase‑noise scaling of a ring oscillator.**  \n   From the Hajimiri–Lee model, thermal‑noise‑limited phase noise is\n   \\[\n   L(\\Delta f) \\approx \\frac{8}{3\\eta}\\,\\frac{kT}{P}\\left(\\frac{f_0}{\\Delta f}\\right)^2.\n   \\]\n   The waveform factor \\(\\eta\\) is unchanged because the normalized switching shape is the same; \\(P\\) is unchanged; only \\(f_0\\) changes.\n\n4. **Result.**  \n   Since \\(L(\\Delta f)\\propto f_0^2\\),\n   \\[\n   f_0 \\to \\frac{f_0}{2} \\quad\\Rightarrow\\quad L(\\Delta f) \\to \\frac{L(\\Delta f)}{4}.\n   \\]\n\nSo at any fixed offset \\(\\Delta f\\), the single‑sideband phase noise drops by **6 dB**.\n\n> **Side note:** The absolute time jitter \\(\\sigma_t\\) stays the same because the slower slew rate (\\(\\propto 1/C_L\\)) is exactly cancelled by the longer period (\\(T \\propto C_L\\)). Only the *phase* error relative to the carrier is reduced.",
        "format": "markdown",
        "sha256": "cdb7e3369b3985368fe981fda537adae2367da993fbff4cd62a56eb36542aa0e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (6 dB) at fixed offset, with a supporting scaling argument.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 34374,
        "total_tokens": 35574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1200,
        "output_tokens": 34374,
        "total_tokens": 35574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes – in the limit \\(C_L\\to\\infty\\) the ring stops oscillating.**\n\nThe figure is a 3‑stage ring oscillator (odd number of inverting stages ⇒ it can oscillate).  \nEach inverter is loaded by its own output resistance \\(R_o\\) and by the capacitance at its output node. For the middle node that capacitance is \\(C+C_L\\); for the other two nodes it is just \\(C\\).\n\n---\n\n### 1.  Small‑signal (start‑up) view\n\nModel each inverter as a single‑pole amplifier\n\n\\[\nA(s)= -\\frac{A_0}{1+s\\tau},\\qquad \n\\tau = R_o C \\;(\\text{light nodes}),\\;\\; \\tau_L = R_o(C+C_L)\\;(\\text{loaded node}).\n\\]\n\nThe loop gain is\n\n\\[\nL(s)= \\left[-\\frac{A_0}{1+s\\tau_L}\\right]\n      \\left[-\\frac{A_0}{1+s\\tau}\\right]^2\n    = -\\frac{A_0^3}{(1+s\\tau_L)(1+s\\tau)^2}.\n\\]\n\nOscillation requires the Barkhausen conditions at some \\(\\omega>0\\):\n\n* **Phase:**  \\(\\arg L(j\\omega)=0^\\circ\\pmod{360^\\circ}\\)\n\n\\[\n180^\\circ -\\arctan(\\omega\\tau_L)-2\\arctan(\\omega\\tau)=0\n\\;\\;\\Rightarrow\\;\\;\n\\arctan(\\omega\\tau_L)+2\\arctan(\\omega\\tau)=180^\\circ .\n\\]\n\n* **Magnitude:** \\(|L(j\\omega)|\\ge 1\\).\n\nBecause \\(\\arctan(\\cdot)\\le 90^\\circ\\), the phase equation forces\n\\(\\arctan(\\omega\\tau)\\to 45^\\circ\\) as \\(\\tau_L\\to\\infty\\), i.e.\n\n\\[\n\\omega \\;\\to\\; \\frac{1}{\\tau}.\n\\]\n\nNow evaluate the magnitude at this frequency:\n\n\\[\n|L(j\\omega)| \\approx\n\\frac{A_0^3}{\\sqrt{1+(\\omega\\tau_L)^2}\\,(1+(\\omega\\tau)^2)}\n\\;\\xrightarrow[\\tau_L\\to\\infty]{}\\;\n\\frac{A_0^3}{\\omega\\tau_L\\cdot 2} \\;\\to\\; 0 .\n\\]\n\nSo for **any finite DC gain \\(A_0\\)** the loop gain falls below unity exactly where the phase reaches \\(360^\\circ\\). The Barkhausen criterion cannot be met; the metastable DC point (\\(v_1=v_2=v_3=V_{th}\\)) becomes **stable**, and the oscillator cannot start (or sustain) oscillation.\n\n---\n\n### 2.  Large‑signal / time‑domain view\n\nWhen \\(C_L\\to\\infty\\), the time constant of the middle node \\(\\tau_L=R_o(C+C_L)\\to\\infty\\).  \nThat node’s voltage evolves as\n\n\\[\nv_2(t) = V_{\\rm target} + (v_2(0)-V_{\\rm target})e^{-t/\\tau_L}.\n\\]\n\nTo complete one half‑cycle the node must cross the inverter threshold \\(V_{th}\\). The crossing time is\n\n\\[\nt_{\\rm cross} = \\tau_L\\ln\\!\\left(\\frac{v_{\\max}}{V_{th}}\\right)\\;\\to\\;\\infty .\n\\]\n\nThus the propagation delay of that stage diverges; the period of the ring diverges (\\(f\\to 0\\)). In the strict limit the node never changes state: the loop is frozen at the metastable operating point.\n\n---\n\n### 3.  Conclusion\n\n* For **finite** \\(C_L\\) the circuit still oscillates, but the frequency drops roughly as \\(f\\propto 1/(R_o C_L)\\).\n* As \\(C_L\\) becomes **arbitrarily large** (\\(\\tau_L\\to\\infty\\)), the loop gain at the required phase‑shift frequency vanishes, and the heavily loaded node cannot cross \\(V_{th}\\) in finite time.\n\nHence **the circuit fails to oscillate**; it settles to a stable DC state rather than producing a periodic waveform.",
        "format": "markdown",
        "sha256": "4e5576c90c6b923d05b8e77fd90f02da52bc1ef0c6d4f6c35257a11fb419b50f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that very large one-node loading can stop oscillation and explains the dominant-pole gain roll-off and Barkhausen failure. However, it incorrectly claims that the circuit still oscillates for every finite CL; sufficiently large finite CL can already reduce the loop gain below unity and suppress oscillation.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 40964,
        "total_tokens": 42090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 40964,
        "total_tokens": 42090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33921,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nYes. If \\(C_L\\) is made arbitrarily large (or even just larger than a critical value that depends on the inverter gain and on the parasitic capacitances), the 3‑stage ring **fails to oscillate**. It does not merely “slow down”; the loop loses the ability to satisfy the Barkhausen (start‑up) condition and collapses to the metastable DC state in which all nodes sit at the inverter threshold \\(V_{TH}\\).\n\n---\n\n### Why?  Small‑signal / loop‑gain view\n\nTreat each inverter as a continuous‑time amplifier with\n\n* small‑signal DC gain \\(-A\\)  (\\(A>1\\)),\n* output resistance \\(R\\) (the “on” resistance of the CMOS stage),\n* and a load capacitance at each node.\n\nIn the figure the second node (between inverter 1 and inverter 2) has the **large** load \\(C_L\\); the other two nodes have only small parasitics \\(C_0\\).\n\nSo the three stage transfer functions are\n\n\\[\nH_1(s)=\\frac{-A}{1+sR C_L},\\qquad\nH_2(s)=H_3(s)=\\frac{-A}{1+sR C_0}.\n\\]\n\nThe loop gain is\n\n\\[\nL(s)=H_1H_2H_3\n     =\\frac{-A^{3}}{(1+sR C_L)(1+sR C_0)^2}.\n\\]\n\nFor sustained oscillation we need a frequency \\(\\omega\\) with\n\n\\[\nL(j\\omega)=1 \\quad\\Longrightarrow\\quad\n\\begin{cases}\n\\text{phase: } & \\pi-\\sum \\tan^{-1}(\\omega R C_i)=0\n               \\;\\Rightarrow\\; \\sum \\tan^{-1}(\\omega R C_i)=\\pi,\\\\[4pt]\n\\text{magnitude: } & A^{3}=\\prod_i\\sqrt{1+(\\omega R C_i)^2}.\n\\end{cases}\n\\]\n\n---\n\n### What happens when \\(C_L\\to\\infty\\)?\n\n*Phase condition.*  \nBecause \\(C_L\\) is huge, \\(\\tan^{-1}(\\omega R C_L)\\to 90^{\\circ}\\) for **any** \\(\\omega>0\\).  \nTo reach a total of \\(180^{\\circ}\\) we therefore need the other two stages to contribute another \\(90^{\\circ}\\):\n\n\\[\n\\tan^{-1}(\\omega R C_0)+\\tan^{-1}(\\omega R C_0)\\approx 90^{\\circ}\n\\;\\Longrightarrow\\;\n\\omega \\approx \\frac{1}{R C_0}.\n\\]\n\nSo the required oscillation frequency is set by the **small** time constants; it does **not** go to zero.\n\n*Magnitude condition.*  \nAt that frequency \\(\\omega\\approx 1/(R C_0)\\),\n\n\\[\n\\sqrt{1+(\\omega R C_L)^2}\\approx \\omega R C_L\n      =\\frac{C_L}{C_0}\\;\\to\\;\\infty .\n\\]\n\nThe other two denominators are just \\(\\sqrt{2}\\). Hence\n\n\\[\n\\prod_i\\sqrt{1+(\\omega R C_i)^2}\n\\;\\approx\\;\n\\frac{C_L}{C_0}\\cdot 2 \\;\\to\\;\\infty .\n\\]\n\nBut the left‑hand side is the fixed inverter gain cubed, \\(A^{3}\\).  \n**No finite \\(A\\) can satisfy the magnitude equation.** The loop gain at the only frequency that could give \\(360^{\\circ}\\) phase is far below unity.\n\n---\n\n### Physical / dynamical interpretation\n\nLinearizing around the only possible DC operating point\n\\((V_1,V_2,V_3)=(V_{TH},V_{TH},V_{TH})\\) gives the characteristic equation\n\n\\[\n\\bigl(\\lambda R C_L+1\\bigr)(\\lambda R C_0+1)^2+A^{3}=0 .\n\\]\n\nFor \\(C_L=C_0\\) and \\(A>2\\) one eigenvalue has positive real part → the equilibrium is unstable and the ring oscillates.  \nAs \\(C_L\\) grows, that unstable pole moves left; once \\(C_L\\) exceeds a critical value (for large \\(A\\) the threshold is roughly \\(C_L \\gtrsim 2C_0\\); more precisely it is obtained by solving \\(2(k+1)^2=A^{3}k\\) with \\(k=C_L/C_0\\)) all eigenvalues have negative real parts.\n\nThus the metastable point **becomes stable**; any small perturbation decays, and the circuit sits at DC. The “infinite delay” of the heavily loaded node kills the regenerative gain needed to sustain switching.\n\n---\n\n### Bottom line\n\n* **Not “just very slow”:** For any finite but sufficiently large \\(C_L\\) the startup condition is violated.\n* **In the limit \\(C_L\\to\\infty\\):** The required loop gain diverges, so oscillation is impossible. The ring acts like three cascaded inverting amplifiers with one pole so low that the total phase can never reach \\(360^{\\circ}\\) with \\(|L|\\ge 1\\).\n\nSo, **yes—the circuit fails to oscillate if \\(C_L\\) becomes arbitrarily large** (indeed, once it exceeds a finite critical capacitance determined by \\(A\\) and the parasitic load).",
        "format": "markdown",
        "sha256": "63fb2552ecd3557f32b502f532e6c0547bb6a264adb2b432c2a80c3b37c2e369"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that an arbitrarily large capacitor on one node creates a dominant pole: the phase-crossover frequency remains finite while loop gain collapses below unity, preventing oscillation. The added threshold estimate is secondary and does not change the requested large-CL conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 17534,
        "total_tokens": 18660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 17534,
        "total_tokens": 18660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: Yes.**  \nIf the load capacitance \\(C_L\\) on that single node is made arbitrarily large, the three‑stage ring will stop oscillating. It will settle to a stable DC operating point (all nodes near the inverter threshold voltage) rather than producing a periodic waveform.\n\n---\n\n### Why it stops: loop‑gain (Barkhausen) analysis\n\nTreat each inverter as a first‑order stage with DC gain \\(-A\\) and an output pole set by its load:\n\n\\[\nH_i(s)=\\frac{-A}{1+s\\tau_i},\\qquad \n\\tau_i = R_o C_i\n\\]\n\nwhere \\(R_o\\) is the inverter output resistance and \\(C_i\\) is the total capacitance at that node.\n\nFor the figure:\n\n* Stage 1 (output node with \\(C_L\\)): \\(\\tau_1 = R_o(C_L+C_{\\text{in}})\\)\n* Stage 2: \\(\\tau_2 = R_o(C_{\\text{in}})\\)\n* Stage 3: \\(\\tau_3 = R_o(C_{\\text{in}})\\)\n\nThe loop transfer function is\n\n\\[\nL(s)=H_1(s)H_2(s)H_3(s)\n      =\\frac{(-A)^3}{(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)} .\n\\]\n\nOscillation requires **both**\n\n1. **Phase:** \\(\\angle L(j\\omega)=0^\\circ\\pmod{360^\\circ}\\)\n2. **Magnitude:** \\(|L(j\\omega)|\\ge 1\\)\n\n---\n\n#### 1. Phase condition\n\n\\[\n\\angle L = 3\\pi -\\bigl[\\arctan\\omega\\tau_1+\\arctan\\omega\\tau_2+\\arctan\\omega\\tau_3\\bigr]=2\\pi\n\\]\n\n\\[\n\\Rightarrow\\quad \\arctan\\omega\\tau_1+\\arctan\\omega\\tau_2+\\arctan\\omega\\tau_3=\\pi .\n\\tag{1}\n\\]\n\nIf \\(\\tau_1=\\tau_2=\\tau_3=\\tau\\), (1) gives \\(\\omega=\\sqrt{3}/\\tau\\) and \\(|L|=A^3/8\\); we need \\(A>2\\) to oscillate.\n\n---\n\n#### 2. What happens when \\(C_L\\to\\infty\\)?\n\nNow \\(\\tau_1\\to\\infty\\) while \\(\\tau_2,\\tau_3\\) stay fixed.  \nFor any **finite** \\(\\omega>0\\):\n\n\\[\n\\arctan(\\omega\\tau_1)\\to \\frac{\\pi}{2}.\n\\]\n\nSo (1) forces\n\n\\[\n\\frac{\\pi}{2}+\\arctan(\\omega\\tau_2)+\\arctan(\\omega\\tau_3)=\\pi\n\\;\\Rightarrow\\;\n\\omega\\to \\frac{1}{\\sqrt{\\tau_2\\tau_3}} \\;<\\;\\infty .\n\\]\n\nThe required oscillation frequency is **bounded**; it does **not** go to zero.\n\nBut at that frequency the loaded stage has long since rolled off:\n\n\\[\n|H_1(j\\omega)|=\\frac{A}{\\sqrt{1+(\\omega\\tau_1)^2}}\n              \\approx \\frac{A}{\\omega\\tau_1}\\;\\to\\;0 .\n\\]\n\nHence\n\n\\[\n|L(j\\omega)| \\approx\n\\frac{A}{\\omega\\tau_1}\\cdot\\frac{A}{\\sqrt{1+(\\omega\\tau_2)^2}}\n\\cdot\\frac{A}{\\sqrt{1+(\\omega\\tau_3)^2}}\n\\;\\longrightarrow\\;0 .\n\\]\n\nThe magnitude at the only frequency that gives \\(360^\\circ\\) phase is **far below unity**.\n\n---\n\n#### 3. Stability of the DC point (Routh–Hurwitz)\n\nSetting \\(L(s)=1\\) gives the characteristic equation\n\n\\[\n(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)+A^3=0 .\n\\]\n\nWriting it as \\(a_3s^3+a_2s^2+a_1s+a_0=0\\) with all positive coefficients, stability requires\n\n\\[\na_2a_1 > a_3a_0 .\n\\]\n\nWith \\(\\tau_1=\\alpha\\tau\\) and \\(\\tau_2=\\tau_3=\\tau\\):\n\n\\[\n(2\\alpha+1)(\\alpha+2)\\tau^3 \\;>\\; \\alpha(1+A^3)\\tau^3 .\n\\]\n\nFor any fixed gain \\(A\\) there is a critical \\(\\alpha_c\\). Once \\(\\alpha>\\alpha_c\\) (i.e. \\(C_L\\) large enough), the inequality fails; two roots cross into the left‑half plane, leaving **no RHP poles**. The equilibrium at \\(v_1=v_2=v_3=V_{th}\\) becomes **stable**.\n\n---\n\n### Physical interpretation\n\n* The heavily loaded node cannot change voltage quickly: its time constant \\(\\tau_1=R_oC_L\\) becomes enormous.\n* The other two stages are ready to switch at a well‑defined frequency, but by the time they demand a transition, stage 1 is still “stuck” near its previous level.\n* The loop gain needed to build up a growing oscillation from noise is insufficient because stage 1 acts like a near‑zero‑gain attenuator at the relevant frequency.\n\nTherefore the ring does **not** simply oscillate more slowly; it **ceases to oscillate entirely** and remains in a DC state.\n\n---\n\n### Conclusion\n\n> **Yes.** If \\(C_L\\) is made arbitrarily large, the time constant of the first stage dominates, the loop gain at the \\(360^\\circ\\) phase‑crossover frequency drops below 1, and the 3‑stage ring’s DC equilibrium becomes stable. The circuit **fails to oscillate**; it settles to a constant voltage rather than producing a periodic waveform.",
        "format": "markdown",
        "sha256": "33b0e13385a7094d7557212a8dab9581ac308235717cebafede537e219ab7874"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The central answer is correct: a very large one-node CL creates a dominant pole, driving loop gain below unity at the phase-crossover frequency. However, the optional Routh-Hurwitz discussion reverses its own criterion: for large α the displayed stability inequality is satisfied, not violated, making that stability argument internally inconsistent.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 28923,
        "total_tokens": 30049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 28923,
        "total_tokens": 30049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **3-stage single-ended CMOS ring oscillator** (each “leg” is an inverter; the outputs are connected in a loop).\n\n### What happens when W → 2W (L, VDD unchanged)\n\n| Quantity | Scaling with W |\n|----------|----------------|\n| **R_on** of each transistor | ∝ 1/W (halves) |\n| **Input capacitance** C_L of each stage (load of next inverter) | ∝ W (doubles) |\n| **Delay per stage** t_d ≈ R_on·C_L | **Constant** |\n| **Oscillation frequency** f₀ ≈ 1/(2N·t_d) | **Unchanged** |\n| **On-current** I_on ∝ g_m·(VDD–V_th) | Doubles |\n| **Charge swing** q_max = C_L·VDD | Doubles |\n| **Power** P ≈ N·C_L·VDD²·f₀ | Doubles |\n| **Thermal noise** S_i = 4kTγ·g_m | Doubles (g_m ∝ W) |\n\n### Phase-noise result\nUsing Hajimiri’s ISF analysis for a ring oscillator, the phase noise due to thermal noise is set by the ratio of the injected noise charge to the maximum charge swing:\n\n\\[\nL(\\Delta f)\\;\\propto\\;\\frac{S_i}{q_{\\max}^2}\\;\\propto\\;\\frac{W}{W^2}\\;=\\;\\frac{1}{W}\n\\]\n\nBecause:\n* **f₀ stays the same** (R_on↓ and C_L↑ cancel).\n* The oscillator becomes “stiffer”: the same noise current causes a smaller voltage perturbation because C_L is larger.\n* The average power (and thus current) has increased.\n\nSo if we double all transistor widths:\n\n\\[\n\\boxed{L(\\Delta f)\\;\\text{improves by a factor of 2 (}\\approx 3\\text{ dB lower)}}\n\\]\n\nIn words: **the phase noise decreases (gets better)**, while the oscillation frequency remains essentially unchanged. The same conclusion holds for 1/f noise because flicker noise also improves as device area (W·L) increases.\n\n---\n\n**Quick intuition:** Wider devices deliver more current to charge proportionally larger capacitors, so the waveform shape (rise/fall time relative to period) is unchanged → f₀ is constant. But the larger nodes store more charge (q_max doubles), so thermal/current noise perturbs the timing less.",
        "format": "markdown",
        "sha256": "2d38ea9c62c6cb0929b12cc78124cd37baf81d66bb4fddc1216bb64ae02ab573"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts an approximately 3 dB phase-noise reduction and gives a valid scaling argument: device noise current doubles while node charge swing doubles, reducing the noise-to-signal ratio by a factor of two.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 28578,
        "total_tokens": 30401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 28578,
        "total_tokens": 30401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **3‑stage single‑ended CMOS ring oscillator** (each stage = PMOS + NMOS inverter; the three outputs are connected in a loop).\n\nIf you scale **all** transistor widths by a factor of 2 (keeping channel length \\(L\\) unchanged):\n\n| Quantity | Scaling |\n|----------|---------|\n| Drain current \\(I_D\\) (strong inversion) | \\(\\propto W \\;\\Rightarrow\\; 2\\times\\) |\n| Load capacitance \\(C_{\\rm load}\\) (gate caps of next stage + parasitics) | \\(\\propto W \\;\\Rightarrow\\; 2\\times\\) |\n| Stage delay \\(\\tau \\approx C_{\\rm load}V_{\\rm DD}/I_D\\) | **unchanged** |\n| Oscillation frequency \\(f_0\\) | **unchanged** |\n| Total power \\(P = 3I_DV_{\\rm DD}\\) | \\(\\Rightarrow\\; 2\\times\\) |\n| Transconductance \\(g_m = 2I_D/V_{\\rm eff}\\) | \\(\\Rightarrow\\; 2\\times\\) |\n| Charge swing \\(q_{\\max}=C_{\\rm load}V_{\\rm DD}\\) | \\(\\Rightarrow\\; 2\\times\\) |\n| Thermal noise current \\(S_i = 4kT\\gamma g_m\\) | \\(\\Rightarrow\\; 2\\times\\) |\n| 1/f noise current \\(S_{i,1/f}\\propto g_m^2/(WL)\\) | \\(\\Rightarrow\\; 2\\times\\) |\n\nBecause the waveform shape (normalized to \\(V_{\\rm DD}\\) and to the period) does **not** change, the impulse‑sensitivity function \\(\\Gamma(t)\\) and its RMS value \\(\\Gamma_{\\rm rms}\\) stay the same.\n\nUsing Hajimiri’s phase‑noise model for a ring oscillator,\n\n\\[\nL(\\Delta f)\\;\\propto\\;\\frac{\\Gamma_{\\rm rms}^2\\,S_i}{q_{\\max}^2}\\left(\\frac{f_0}{\\Delta f}\\right)^2\n\\;\\propto\\;\\frac{W}{W^2}\n\\;=\\;\\frac{1}{W},\n\\]\n\nor, more compactly,\n\n\\[\nL(\\Delta f)\\;\\propto\\;\\frac{kT}{P}\\,\\frac{V_{\\rm DD}}{V_{\\rm eff}}\\left(\\frac{f_0}{\\Delta f}\\right)^2 .\n\\]\n\nSince \\(f_0\\) and \\(V_{\\rm eff}\\) are unchanged but \\(P\\) doubles:\n\n\\[\n\\boxed{L(\\Delta f)\\ \\text{is halved} \\;\\Rightarrow\\; \\text{3 dB lower phase noise}.}\n\\]\n\nSo:\n\n* **Frequency:** unchanged (delay \\(\\propto C/I\\) is constant).\n* **Phase noise:** **improves by 3 dB** (both thermal and 1/f contributions drop by a factor of 2).\n\nIn short: wider devices supply more current to charge the proportionally larger capacitances, leaving \\(f_0\\) intact but cutting the time‑jitter sensitivity per unit noise, which lowers the phase‑noise spectral density by **3 dB**.",
        "format": "markdown",
        "sha256": "426c68069fbff93c096ae35f3dfbda93f8bc7005a2756c233a0a7102d1120faa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes about a 3 dB phase-noise reduction. Its scaling argument is sound: device noise current and node charge both double, so noise relative to signal falls by a factor of two; the frequency remains approximately unchanged.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 27218,
        "total_tokens": 29041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 27218,
        "total_tokens": 29041,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23873,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a **3‑stage CMOS ring oscillator**.  \nIf we scale **both** the NMOS and PMOS widths by a factor of 2 (keeping channel length \\(L\\) and supply \\(V_{DD}\\) unchanged), the key effects are:\n\n| Quantity | Scaling with \\(W\\) | Reason |\n|---|---|---|\n| **Drive current** \\(I_D\\) | \\(\\propto W\\) | \\(I_D=\\frac{1}{2}\\mu C_{ox}(W/L)(V_{DD}-V_{th})^2\\) |\n| **Load capacitance** \\(C_L\\) (input of next inverter) | \\(\\propto W\\) | \\(C_L\\approx C_{ox}W L+\\dots\\) |\n| **Stage delay** \\(\\tau_d\\approx C_LV_{DD}/(2I_D)\\) | **Constant** | Both numerator and denominator double |\n| **Oscillation frequency** \\(f_0=1/(2N\\tau_d)\\) | **Unchanged** | \\(N=3\\) is fixed |\n| **Max. charge swing** \\(q_{max}=C_LV_{DD}\\) | \\(\\propto W\\) | Doubles |\n| **Transconductance** \\(g_m=2I_D/(V_{DD}-V_{th})\\) | \\(\\propto W\\) | Doubles |\n| **Thermal noise current** \\(S_i=4kT\\gamma g_m\\) | \\(\\propto W\\) | Doubles |\n\n### Phase‑noise result\nUsing Hajimiri’s ISF analysis (or the simpler jitter model), the phase‑noise spectral density at a given offset is\n\n\\[\nL(\\Delta f)\\;\\propto\\;\\frac{g_m}{q_{max}^2}\n\\;\\propto\\;\\frac{W}{W^2}\n\\;\\propto\\;\\frac{1}{W}.\n\\]\n\nBecause \\(f_0\\) stays the same but the **charge swing** \\(q_{max}\\) grows faster than the **noise current** \\(S_i\\), the relative timing jitter per transition is reduced by \\(1/\\sqrt{W}\\).\n\nFor \\(W \\to 2W\\):\n\n\\[\n\\boxed{L(\\Delta f)\\;\\text{is halved}\\;\\Rightarrow\\;3\\ \\text{dB improvement}}\n\\]\n\nIn other words:\n* The oscillation frequency does **not** change.\n* The **phase noise decreases by a factor of 2** (i.e. **–3 dB** in dBc/Hz).\n\nThis is consistent with the well‑known rule that, for a fixed frequency, ring‑oscillator phase noise is inversely proportional to the power consumption \\(P\\approx N C_L V_{DD}^2 f_0\\), which doubles when the devices are widened.",
        "format": "markdown",
        "sha256": "3bdea099b3e70cf3abd997e261334f625d81e29b46b1fe5c4a7017ddf70e0fda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the device widths halves phase noise (about a 3 dB improvement). Its scaling argument captures the doubled noise and charge swing, with no material contradiction.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 30180,
        "total_tokens": 32003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1823,
        "output_tokens": 30180,
        "total_tokens": 32003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Solution outline**\n\n1. **Small–signal model of one inverter**  \n   Replace each CMOS inverter by its small–signal equivalent:\n   * NMOS: transconductance \\(g_{mn}\\), output resistance \\(r_{on}\\)  \n   * PMOS: transconductance \\(g_{mp}\\), output resistance \\(r_{op}\\)  \n\n   The common supply node is the port we test; apply a small–signal test\n   voltage \\(v_{dd}\\) there.  Because the three stages are identical and\n   arranged in a symmetric ring, the forced (unique) small–signal\n   solution must be cyclically symmetric:\n\n   \\[\n   v_{o1}=v_{o2}=v_{o3}\\equiv v_o .\n   \\]\n\n   Hence **no small–signal current flows through the feedback wires**\n   that join the stages; each inverter is effectively *diode‑connected*\n   between \\(V_{DD}\\) and ground.\n\n2. **KCL at one internal node \\(v_o\\)**  \n\n   Current leaving \\(v_o\\) through the NMOS branch:\n   \\[\n   i_n = \\frac{v_o}{r_{on}}+g_{mn}v_o\n        = v_o\\!\\left(g_{mn}+\\frac1{r_{on}}\\right)\\equiv v_o A'.\n   \\]\n\n   Current entering \\(v_o\\) from the PMOS branch (\\(v_{sg}=v_{dd}-v_o\\)):\n   \\[\n   i_p = \\frac{v_{dd}-v_o}{r_{op}}+g_{mp}(v_{dd}-v_o)\n        =(v_{dd}-v_o)\\!\\left(g_{mp}+\\frac1{r_{op}}\\right)\\equiv (v_{dd}-v_o)B .\n   \\]\n\n   Equating \\(i_n=i_p\\):\n   \\[\n   v_o A'=(v_{dd}-v_o)B\n   \\;\\;\\Longrightarrow\\;\\;\n   v_o=\\frac{B}{A'+B}\\,v_{dd}.\n   \\]\n\n3. **Current drawn from the test source by one stage**\n\n   \\[\n   i_1 = i_n = v_o A'\n        = \\frac{A'B}{A'+B}\\,v_{dd}.\n   \\]\n\n4. **Three stages are in parallel** between the supply and ground,\n   so the total current is \\(i_{dd}=3i_1\\).  The small–signal resistance\n   seen at the supply node is therefore\n\n   \\[\n   R_X \\equiv \\frac{v_{dd}}{i_{dd}}\n   =\\frac{A'+B}{3A'B}\n   =\\frac13\\!\\left(\\frac1{A'}+\\frac1B\\right).\n   \\]\n\n---\n\n### Final expression\n\nDefining\n\n\\[\nA' = g_{mn}+\\frac1{r_{on}},\\qquad\nB  = g_{mp}+\\frac1{r_{op}},\n\\]\n\nthe resistance looking into the supply node of the 3‑stage ring is\n\n\\[\n\\boxed{\nR_X \\;=\\; \\frac{1}{3}\\left[\n\\frac{1}{\\,g_{mn}+1/r_{on}\\,}\n\\;+\\;\n\\frac{1}{\\,g_{mp}+1/r_{op}\\,}\n\\right]\n}\n\\]\n\nor, using the diode‑connected resistance of each transistor\n\\(r_{on}\\parallel 1/g_{mn}\\) and \\(r_{op}\\parallel 1/g_{mp}\\),\n\n\\[\n\\boxed{\nR_X = \\frac{\\bigl(r_{on}\\parallel 1/g_{mn}\\bigr)\n      +\\bigl(r_{op}\\parallel 1/g_{mp}\\bigr)}{3}\n}.\n\\]\n\n---\n\n### Common simplified case\n\nIf channel‑length modulation is neglected (\\(r_{on},r_{op}\\to\\infty\\))\nand the inverter is symmetric (\\(g_{mn}=g_{mp}=g_m\\)):\n\n\\[\n\\boxed{R_X = \\frac{2}{3\\,g_m}}.\n\\]\n\n*Physical interpretation:* By symmetry the small‑signal voltages at\nall three outputs are identical, so the ring feedback carries no\nsmall‑signal current.  Each stage therefore appears as two diode‑connected\ntransistors in series; the three such branches are in parallel across\nthe supply, giving the factor \\(1/3\\).",
        "format": "markdown",
        "sha256": "f8828fdf798f3235b61e0985cb614a089117f251a98a9c70fac231988f08afd1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static diode-connected inverter derivation is internally consistent, but it ignores the oscillation-driven charging and discharging of the load capacitances, which sets the resistance seen at the supply node.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 27732,
        "total_tokens": 29433,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 27732,
        "total_tokens": 29433,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small‑signal resistance looking into the common supply node (the port marked by the circle) we linearize each inverter around its DC equilibrium point and apply a test voltage \\(v_t\\) at that node (the external ideal \\(V_{DD}\\) is AC ground).\n\n---\n\n### 1.  Small‑signal model of one inverter stage\n\nFor a CMOS inverter let  \n\n* \\(g_{mn}\\) = NMOS transconductance, source grounded  \n* \\(g_{mp}\\) = PMOS transconductance, source at the common node \\(v_t\\)  \n* neglect channel‑length modulation (\\(r_o\\to\\infty\\)) – the result is independent of \\(r_o\\) as long as \\(r_o\\gg 1/g_m\\).\n\nBecause the three stages are identical and the ring is symmetric, a common‑mode excitation \\(v_t\\) forces every internal node to the **same** small‑signal voltage \\(v\\):\n\n\\[\nv_1=v_2=v_3\\equiv v .\n\\]\n\nFor inverter \\(i\\) (input \\(v\\), output also \\(v\\) because of symmetry) KCL at its output node gives\n\n\\[\n\\underbrace{-g_{mn}v}_{\\text{NMOS }D\\!\\to\\!S}\n\\;+\\;\n\\underbrace{g_{mp}(v_t-v)}_{\\text{PMOS }S\\!\\to\\!D}\n= 0 .\n\\]\n\nHence\n\n\\[\nv = \\frac{g_{mp}}{g_{mn}+g_{mp}}\\,v_t .\n\\]\n\n---\n\n### 2.  Current drawn by one stage from the supply node\n\nThe PMOS source draws\n\n\\[\ni_1 = g_{mp}(v_t-v)\n     = g_{mp}v_t\\!\\left[1-\\frac{g_{mp}}{g_{mn}+g_{mp}}\\right]\n     = \\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}\\,v_t .\n\\]\n\nSo each inverter presents a resistance\n\n\\[\nR_{\\text{stage}} = \\frac{v_t}{i_1}\n                  = \\frac{1}{g_{mn}}+\\frac{1}{g_{mp}} .\n\\]\n\n---\n\n### 3.  Three stages in parallel\n\nAll three inverters are tied to the **same** node \\(v_t\\) and, by symmetry, each draws the same current \\(i_1\\). Therefore\n\n\\[\ni_t = 3\\,i_1 .\n\\]\n\nThe small‑signal resistance seen looking into the supply node is\n\n\\[\n\\boxed{%\nR_X \\;=\\; \\frac{v_t}{i_t}\n      \\;=\\; \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n      \\;=\\; \\frac{g_{mn}+g_{mp}}{3\\,g_{mn}g_{mp}} } .\n\\]\n\n---\n\n### 4.  Matched devices (\\(g_{mn}=g_{mp}\\equiv g_m\\))\n\nIf the NMOS and PMOS are sized so that \\(g_{mn}=g_{mp}=g_m\\),\n\n\\[\n\\boxed{ R_X = \\frac{2}{3\\,g_m} } .\n\\]\n\n*(If finite output resistances \\(r_{on},r_{op}\\) are included, replace \\(g_{mn}\\to g_{mn}+1/r_{on}\\) and \\(g_{mp}\\to g_{mp}+1/r_{op}\\); the structure remains \\((R_n'+R_p')/3\\).)*\n\nThus the ring oscillator presents a **positive** small‑signal load resistance to its supply; for the 3‑stage ring shown, with matched transistor transconductance \\(g_m\\), that resistance is \\(2/(3g_m)\\).",
        "format": "markdown",
        "sha256": "ab548ed3791c270bc191bb594d0c0c9c55f05eca1fbe29eab5de9a3e4d601c77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent for a static, non-oscillating operating point, but it ignores the dominant oscillation-driven charging and discharging of the load capacitances. The resulting gm-based resistance misses the mechanism asked about.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 29174,
        "total_tokens": 30875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 29174,
        "total_tokens": 30875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a 3‑stage CMOS ring oscillator whose three inverters share a common supply node (labelled by the port at which we insert a test source).  \nTo find the small‑signal resistance seen looking **down** into that node we apply a DC (low‑frequency) test voltage \\(v_{dd}\\) to the common \\(V_{DD}\\) rail and compute the resulting change in the total average current \\(I_{DD}\\) drawn by the three stages.\n\n---\n\n### 1.  Symmetry / operating point\nEach inverter is symmetric, so its switching threshold is at\n\n\\[\nV_{\\text{inv}}=\\frac{V_{DD}}{2}.\n\\]\n\nBecause the ring is symmetric, at DC (the unstable equilibrium around which we linearize) every node sits at \\(V_{DD}/2\\).\n\nWhen the supply is perturbed by a small amount \\(v_{dd}\\), the inverter thresholds track it, so **each node voltage changes by**\n\n\\[\n\\delta V_{\\text{node}} = \\frac{v_{dd}}{2}.\n\\]\n\n---\n\n### 2.  Small‑signal current of one PMOS device\nConsider one PMOS transistor (the current drawn from \\(V_{DD}\\) flows only through the PMOS devices).  \nIts source is at \\(V_{DD}+v_{dd}\\) and its gate is at \\(V_{DD}/2+v_{dd}/2\\), so the source–gate perturbation is\n\n\\[\n\\delta V_{SG} = (V_{DD}+v_{dd})-\\left(\\frac{V_{DD}}{2}+\\frac{v_{dd}}{2}\\right)\n             = \\frac{V_{DD}}{2}+\\frac{v_{dd}}{2},\n\\qquad\\Rightarrow\\qquad\n\\delta v_{sg}= \\frac{v_{dd}}{2}.\n\\]\n\nLet the small‑signal transconductance of each device (NMOS or PMOS) at this operating point be \\(g_m\\) (and neglect the finite output resistance \\(r_o\\) for simplicity; it is easily added later).  \nThe change in PMOS drain current is\n\n\\[\n\\delta I_{D,p}= g_m\\,\\delta v_{sg}= g_m\\frac{v_{dd}}{2}.\n\\]\n\n---\n\n### 3.  Total current drawn by the 3‑stage oscillator\nAll three PMOS devices are connected in parallel to the same supply node, so the total small‑signal current is\n\n\\[\ni_{dd}=3\\,\\delta I_{D,p}=3\\,g_m\\frac{v_{dd}}{2}\n      =\\frac{3g_m}{2}\\,v_{dd}.\n\\]\n\n---\n\n### 4.  Small‑signal resistance\nBy definition, the resistance seen looking into the supply node is\n\n\\[\nR_{\\text{eq}}=\\frac{v_{dd}}{i_{dd}}\n            =\\frac{v_{dd}}{\\dfrac{3g_m}{2}v_{dd}}\n            =\\boxed{\\frac{2}{3\\,g_m}}.\n\\]\n\n---\n\n### 5.  Including transistor output resistance\nIf each transistor has a finite output resistance \\(r_o\\) (\\(g_o=1/r_o\\)), the current change includes both the \\(g_m\\) term and the conductance term:\n\n\\[\n\\delta I_{D,p}=(g_m+g_o)\\frac{v_{dd}}{2},\n\\]\n\nso the result generalizes to\n\n\\[\n\\boxed{R_{\\text{eq}}=\\frac{2}{3\\,(g_m+g_o)}\n      \\;\\approx\\; \\frac{2}{3g_m}\\quad (g_o\\ll g_m)}.\n\\]\n\n---\n\n**Interpretation:** The oscillator presents a **positive** small‑signal resistance at DC (the average current grows with \\(V_{DD}\\) because both the per‑switch charge \\(C V_{DD}\\) and the oscillation frequency increase). For the 3‑stage ring shown, that resistance is \\(2/(3g_m)\\), i.e. it is the parallel combination of three identical “half‑transconductance” paths, each contributing a conductance of \\(g_m/2\\) because the inverter inputs track the supply by \\(v_{dd}/2\\).",
        "format": "markdown",
        "sha256": "0f99f8871f41142d83ca52534a87f1efde3e91134ea1df166da2a4b4a47aa4bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and concludes 2/(3gm), missing the dominant oscillation-driven charging and discharging of the node capacitances. Its brief mention of switching and frequency does not correct that conclusion; the golden solution assigns this static analysis 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 41796,
        "total_tokens": 43497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35541,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1701,
        "output_tokens": 41796,
        "total_tokens": 43497,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35541,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: Yes – the formula is valid only at the unstable DC “metastable” point. Once the ring is oscillating the devices are switching, so the resistance is time‑varying and its average (small‑signal) value is set by the oscillator’s switching current, not by the static transistor \\(g_m\\)’s.**\n\n---\n\n### 1.  Where the expression comes from\n\nIn one inverter, if the input is forced to equal the output (\\(v_{in}=v_{out}=V_M\\), the switching threshold), both NMOS and PMOS are on and diode‑connected:\n\n* NMOS: resistance \\(1/g_{mn}\\) between its drain (the output) and ground.\n* PMOS: resistance \\(1/g_{mp}\\) between \\(V_{DD}\\) and its drain (the output).\n\nBecause the two transistors are in series between \\(V_{DD}\\) and ground, **one inverter branch** presents\n\n\\[\nR_{\\rm inv}= \\frac{1}{g_{mn}}+\\frac{1}{g_{mp}} .\n\\]\n\nThe three inverters share the same \\(V_{DD}\\) rail and the same ground, so they appear in **parallel**; hence\n\n\\[\nR_X = \\frac{R_{\\rm inv}}{3}\n      \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nThis is a **small‑signal resistance around a DC operating point**.\n\n---\n\n### 2.  Why that DC point disappears\n\nFor a 3‑stage ring the loop gain at DC is \\(-A_v^3\\). With any reasonable inverter gain (\\(A_v>1\\)) the product is \\(<-1\\) and the phase is \\(180^\\circ\\). Therefore the solution\n\n\\[\nv_1=v_2=v_3=V_M\n\\]\n\nis **unstable**. The circuit never sits there; any noise pushes it into a periodic orbit where the nodes swing almost rail‑to‑rail (\\(\\approx 0\\) to \\(V_{DD}\\)).\n\n---\n\n### 3.  What happens during oscillation?\n\n| Condition | Instantaneous state of one inverter | Resistance of that branch |\n|-----------|-------------------------------------|---------------------------|\n| Output settled high/low | One device is **off**, the other is on (but \\(v_{gs}\\approx 0\\) or \\(V_{DD}\\)) | **Open** (ideally \\(\\infty\\); only leakage) |\n| During switching | \\(v_{in}\\approx V_M\\) → **both** on | \\(1/g_{mn}+1/g_{mp}\\) (the value above) |\n| Most of the period | Not at \\(V_M\\) | Very high |\n\nSo the instantaneous “small‑signal” resistance is **not constant**; it is a periodic function of time, spending only a small fraction of the period near the diode‑connected value.\n\nMore importantly, **there is no DC path** from \\(V_{DD}\\) to ground in a CMOS inverter when the output is static. The average current drawn from the supply is purely dynamic:\n\n\\[\nI_{DD}(V_{DD}) \\;=\\; 3C_L V_{DD} f_{\\rm osc}(V_{DD}) \\;+\\; I_{\\rm sc}(V_{DD}),\n\\]\n\nwhere \\(C_L\\) is the load capacitance per stage and \\(f_{\\rm osc}\\) is the oscillation frequency.\n\n---\n\n### 4.  The correct small‑signal resistance for a running oscillator\n\nIf you apply a *low‑frequency* (or DC) perturbation \\(\\delta V_{DD}\\), the oscillator responds by changing its frequency and therefore its average current. The low‑frequency small‑signal resistance is\n\n\\[\nR_X = \\left(\\frac{\\partial I_{DD}}{\\partial V_{DD}}\\right)^{-1}.\n\\]\n\nUsing \\(f_{\\rm osc}\\approx 1/(2N\\tau_d)\\) with \\(N=3\\) and \\(\\tau_d\\propto C_LV_{DD}/I_{D,\\rm sat}\\), one finds \\(I_{DD}\\propto (V_{DD}-V_{th})^2\\) and therefore\n\n\\[\nR_X \\;\\approx\\; \\frac{4}{g_m}\\;\\text{to}\\;\\frac{8}{g_m}\n\\]\n\n(depending on the exact delay model). Compare with the static estimate:\n\n\\[\n\\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\;\\approx\\; \\frac{2}{3g_m}.\n\\]\n\nSo the **actual resistance is typically larger by a factor of order \\(V_{DD}/V_{ov}\\)** (often 3–10×).\n\nIf the supply perturbation is at a frequency **comparable to \\(f_{\\rm osc}\\)**, the circuit behaves as a **linear periodically time‑varying (LPTV)** system; the impedance is no longer a single scalar \\(R_X\\) but contains harmonic components due to mixing with the oscillation.\n\n---\n\n### 5.  Bottom line\n\n* **The formula \\(R_X\\approx (1/g_{mn}+1/g_{mp})/3\\) describes the *unstable equilibrium* of the ring, not its steady‑state oscillation.**\n* During oscillation the transistors are switching; the instantaneous conductance is time‑varying, and the DC current is set by charging/discharging capacitance.\n* The effective small‑signal resistance seen by the supply is therefore **different** (usually larger) and must be obtained from the derivative of the switching current, \\(R_X=(\\partial I_{DD}/\\partial V_{DD})^{-1}\\), or from a time‑varying / harmonic‑balance analysis if the perturbation is near \\(f_{\\rm osc}\\).\n\nSo yes: **the answer changes completely once the ring is oscillating.**",
        "format": "markdown",
        "sha256": "89094e6f86cef1327c20e5834fe0e554a3194f566ad1cff7f91ca12077137234"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillation draws capacitive switching current, but concludes the effective resistance is typically 3–10× larger and changes completely. The key result is that it remains on the order of the MOS on-resistance, not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1781,
        "output_tokens": 23673,
        "total_tokens": 25454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1781,
        "output_tokens": 23673,
        "total_tokens": 25454,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes – the answer changes, and in fact the diode‑connected formula is no longer valid.**\n\nHere is why.\n\n### 1.  Where the formula comes from\nThe expression  \n\n\\[\nR_X \\;\\approx\\; \\frac13\\!\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right)\n\\]\n\nis obtained by linearizing the 3‑stage ring around its **unstable DC equilibrium**: every node sits at the inverter threshold \\(V_M\\), so for each stage  \n\n\\[\nv_{in}=v_{out}=V_M .\n\\]\n\nBecause the gate of the NMOS (and the gate of the PMOS) is connected to a node that has exactly the same small‑signal potential as its drain, each transistor behaves as a **diode‑connected** device with small‑signal resistance \\(1/g_m\\).  The PMOS and NMOS of one inverter are in series between \\(V_{DD}\\) and ground, giving \\(R_{\\text{inv}}=1/g_{mn}+1/g_{mp}\\).  Because the three inverters share the same supply node, they appear in parallel, hence the factor \\(1/3\\).\n\n### 2.  What happens when the circuit oscillates?\nA 3‑stage ring is unstable at that DC point; any noise pushes it into a **limit cycle**.  Once oscillating:\n\n| DC (metastable) assumption | Oscillating reality |\n|---|---|\n| \\(v_{in}=v_{out}=V_M\\) (constant) | Nodes are periodic square waves, phase‑shifted by \\(T/3\\). Thus \\(v_{in}\\neq v_{out}\\). |\n| Both devices are “on” at the bias point; \\(g_m\\) is constant | Each transistor is either fully on (\\(g_m\\approx g_{m,\\max}\\)) or off (\\(g_m\\approx 0\\)) depending on the phase. The small‑signal parameters are **time‑periodic** (LPTV system). |\n| Current is static DC through diode‑connected FETs | Supply current is dominated by **dynamic charging** of load capacitances, \\(I_{DD,avg}\\approx C V_{DD}f_{osc}\\) (plus short‑circuit current during transitions). |\n\nBecause the diode condition \\(v_g=v_d\\) is lost, the resistance of each inverter is **not** \\(1/g_{mn}+1/g_{mp}\\) at any given instant.\n\n### 3.  The correct small‑signal resistance of an oscillating ring\nIf you apply a small AC test voltage \\(v_{dd}\\) at a frequency **much lower** than \\(f_{osc}\\), the internal nodes have time to follow the average change in supply; the response is set by how the **time‑averaged current** changes with \\(V_{DD}\\):\n\n\\[\nR_X \\;=\\; \\left[\\frac{dI_{DD,avg}}{dV_{DD}}\\right]^{-1}.\n\\]\n\nFor a simple strong‑inversion model,\n\\[\nI_{DD,avg}\\;\\approx\\;I_{D,sat}\\;\\propto\\;(V_{DD}-V_{th})^2,\n\\qquad\n\\frac{dI_{DD,avg}}{dV_{DD}}\\;\\propto\\;(V_{DD}-V_{th}),\n\\]\nso\n\n\\[\nR_{X,\\;osc}\\;\\approx\\;\\frac{1}{\\beta\\,(V_{DD}-V_{th})}\n\\]\n\nwhereas the DC formula gives\n\\[\nR_{X,\\;dc}\\;=\\;\\frac{2}{3}\\,\\frac{1}{\\beta\\,(V_{DD}/2-V_{th})}.\n\\]\n\nThey are of the same order but **different by a constant factor** (e.g. \\(3/4\\) if \\(V_{th}=0\\)).  More importantly, the physical origin is different: one is a static diode resistance at \\(V_M\\); the other is the **gain of the oscillator’s current‑versus‑supply characteristic**.\n\nIf the test frequency is **near \\(f_{osc}\\)** or its harmonics, the impedance is no longer purely resistive: supply noise modulates the oscillation phase (creating jitter), so the response contains quadrature components—i.e. a complex, frequency‑dependent impedance.\n\n### 4.  Bottom line\nThe formula \\(R_X\\approx \\frac13(1/g_{mn}+1/g_{mp})\\) is only correct if you **force** the ring to sit at its DC metastable point (or compute an AC analysis around that unstable bias).  \n**If the circuit is actually oscillating**, the small‑signal resistance is time‑varying, the diode‑connected assumption breaks down, and the effective low‑frequency resistance is determined by the derivative of the switching current with respect to \\(V_{DD}\\), not by the transistor transconductances evaluated at \\(V_M\\).\n\nSo: **Yes, the answer changes.**",
        "format": "markdown",
        "sha256": "338ac50d6c0b91160289fc439986f21b73d3f3a9a85fdbe0f218e0e5f6f33d35"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies dynamic capacitive charging as the oscillating ring’s supply-current mechanism and concludes that the low-frequency resistance remains on the order of 1/gm, not much higher than the static estimate. Its average-current/strong-inversion argument is a reasonable approximate route to that result; the explicit 1/(3 f0 CL) derivation is not required by the full-credit rule.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1781,
        "output_tokens": 27433,
        "total_tokens": 29214,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1781,
        "output_tokens": 27433,
        "total_tokens": 29214,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** **Yes — the answer changes.** The formula\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\nis only valid at the **unstable DC metastable point** of the 3‑stage ring (where every node sits at the inverter switching threshold \\(V_{th}\\)). Once the circuit oscillates, the nodes are full‑swing, time‑varying waveforms, so the transistors are **not** diode‑connected, and the resistance seen from the supply is governed by the oscillator’s **dynamic** (capacitive/short‑circuit) current rather than by the DC channel conductance at \\(V_{th}\\).\n\n---\n\n### 1. Why the formula works “on paper” at DC\n\nAt the unique DC equilibrium of an odd‑stage ring, symmetry forces\n\\[\nv_1=v_2=v_3=V_{th}.\n\\]\nFor each inverter the gate and drain are therefore at the same potential, so **both the NMOS and PMOS are diode‑connected**:\n* resistance of NMOS branch \\(\\approx 1/g_{mn}\\)\n* resistance of PMOS branch \\(\\approx 1/g_{mp}\\)\n\nBecause the two are stacked between \\(V_{DD}\\) and GND, one inverter looks like\n\\[\nR_{\\rm inv}\\approx \\frac{1}{g_{mn}}+\\frac{1}{g_{mp}} .\n\\]\nThe three inverters are independent DC loads in parallel across the supply (their gates draw no DC current), so\n\\[\nR_X = \\frac{R_{\\rm inv}}{3}.\n\\]\n\n---\n\n### 2. What happens when the oscillator is running\n\nA 3‑stage ring has **no stable DC solution**; that equilibrium is unstable. In steady‑state oscillation the nodes are phase‑shifted by \\(2\\pi/3\\) and swing roughly between \\(0\\) and \\(V_{DD}\\). Consequently:\n\n| Feature at DC (metastable) | Feature during oscillation |\n|---|---|\n| \\(v_{in}=v_{out}=V_{th}\\) for every inverter | \\(v_{in}\\) and \\(v_{out}\\) are different; they toggle with 120° phase shift |\n| Both \\(M_n\\) and \\(M_p\\) are on, acting as diode‑connected resistors | At any instant **one transistor is off** (or nearly so) and the other acts as a switch; both are on only briefly during transitions |\n| DC current is a continuous channel current | DC current is **dynamic**: charging/discharging load capacitances (\\(C_L\\)) plus a short‑circuit pulse each time the input crosses the threshold |\n| Small‑signal resistance is set by local \\(g_m\\) at \\(V_{th}\\) | Instantaneous resistance is **time‑varying** (very high when settled, low during switching); the effective low‑frequency resistance is set by how the **average** supply current changes with \\(V_{DD}\\) |\n\nBecause the devices are switching, the assumption “each inverter behaves as two diode‑connected devices in series” fails.\n\n---\n\n### 3. The correct small‑signal resistance of the oscillating circuit\n\nFor a low‑frequency perturbation \\(\\delta v_{DD}\\) superimposed on the supply, the oscillator responds by changing its frequency \\(f\\) and its average current\n\\[\nI_{DD} \\approx 3\\,C_L V_{DD} f + I_{sc}.\n\\]\nUsing the usual delay model \\(t_d \\propto C_L V_{DD}/I_{on}\\) with \\(I_{on}\\propto (V_{DD}-V_{th})^2\\), one finds\n\\[\nf \\propto \\frac{(V_{DD}-V_{th})^2}{V_{DD}}\n\\quad\\Rightarrow\\quad\nI_{DD} \\propto (V_{DD}-V_{th})^2.\n\\]\nHence the **effective** small‑signal resistance of the *running* oscillator is\n\\[\nR_X^{\\rm (osc)} = \\left(\\frac{dI_{DD}}{dV_{DD}}\\right)^{-1}\n\\approx \\frac{2}{k_n(V_{DD}-V_{th})},\n\\]\nwhere \\(k_n=\\mu_n C_{ox}(W/L)_n\\) (and similarly for PMOS).\n\nCompare with the diode‑connected value evaluated at \\(V_{DD}/2\\):\n\\[\nR_X^{\\rm (dc)} = \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\approx \\frac{2}{3\\,k(V_{DD}/2-V_{th})}.\n\\]\n\nThese are **not the same**; they differ by a factor that depends on \\(V_{th}/V_{DD}\\) (typically \\(R_X^{\\rm (osc)}\\) is larger, though the exact ratio is process‑dependent). The key point is that the resistance is now determined by **supply‑to‑frequency sensitivity**, not by the local diode resistance at the switching threshold.\n\nBecause the three stages are still electrically in parallel across \\(V_{DD}\\), the factor of **1/3 remains**:\n\\[\nR_X^{\\rm (osc)} = \\frac{r_{\\rm stage}^{\\rm (osc)}}{3},\n\\]\nbut\n\\[\nr_{\\rm stage}^{\\rm (osc)} \\neq \\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}.\n\\]\n\n---\n\n### 4. Summary\n\n* **The formula is correct for the DC metastable point** (and indeed one can prove with KCL at the equilibrium that \\(R_X=(1/g_{mn}+1/g_{mp})/3\\)).\n* **If the circuit is actually oscillating, that point is irrelevant.** The instantaneous resistance is time‑varying, the average current is dynamic, and the small‑signal resistance for supply perturbations is \\( (dI_{DD}/dV_{DD})^{-1} \\).\n* **Therefore, yes — the answer changes.** The diode‑connected model must be replaced by a dynamic model that accounts for switching, capacitive charging, and the oscillator’s frequency dependence on \\(V_{DD}\\). The resistance is generally **larger** and is set by the oscillator’s supply sensitivity rather than by the static \\(g_m\\)’s at \\(V_{th}\\).",
        "format": "markdown",
        "sha256": "8bdc9d52a0ad63494cf014a455f0804c82e7c6841864a87f5ad6f0878427e76e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly uses dynamic capacitive supply current and supply-dependent oscillation frequency to obtain an inverse-gm-scale resistance, so it captures the key result that RX remains roughly the same order as the static estimate. Calling it typically larger is imprecise, but the answer does not establish a large increase.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1781,
        "output_tokens": 29471,
        "total_tokens": 31252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1781,
        "output_tokens": 29471,
        "total_tokens": 31252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, **M₇ is the tail current source** for the input differential pair M₁/M₂. Its gate is driven by the clock (CK), so when the comparator enters the evaluation phase M₇ turns on and sources a tail current\n\n\\[\nI_{SS} \\propto W_7 \\quad (\\text{for fixed } V_{GS}=V_{DD}).\n\\]\n\nThe **initial voltage gain** \\(A_{v0}\\) is defined as the differential voltage developed at the outputs (X/Y) **just before the cross-coupled latch (M₃–M₆) turns on and regeneration begins**. It is found by combining two effects:\n\n1. **Transconductance of the input pair:**  \n   For M₁/M₂ in saturation,\n   \\[\n   g_{m1,2} \\propto \\sqrt{I_{SS}} \\propto \\sqrt{W_7}.\n   \\]\n\n2. **Integration time before the latch engages:**  \n   During evaluation, nodes P/Q (and subsequently X/Y) discharge from \\(V_{DD}\\). The latch devices (M₃/M₄/M₅/M₆) remain off until the output has fallen by roughly a threshold voltage. That “pre-regeneration” time is set by the common-mode discharge current:\n   \\[\n   t_{int} \\approx \\frac{C\\,V_{th}}{I_{SS}/2} \\propto \\frac{1}{I_{SS}} \\propto \\frac{1}{W_7}.\n   \\]\n\nThe differential output developed during this interval is\n\\[\n\\Delta V_{out} \\approx \\frac{g_{m1,2}V_{in}}{2C}\\,t_{int}\n\\;\\;\\Rightarrow\\;\\;\nA_{v0}=\\frac{\\Delta V_{out}}{V_{in}}\n\\propto \\frac{g_{m1,2}}{I_{SS}}\n\\propto \\frac{\\sqrt{I_{SS}}}{I_{SS}}\n= \\frac{1}{\\sqrt{I_{SS}}}\n\\propto \\frac{1}{\\sqrt{W_7}}.\n\\]\n\n### Result\nBecause the larger tail current makes the outputs fall faster (shortening the time the differential pair has to build up a signal), **the initial voltage gain decreases as \\(W_7\\) increases**.\n\nSo, widening M₇:\n- **Increases** the tail current and speed,\n- but **reduces** the pre-regeneration (initial) voltage gain \\(A_{v0}\\).\n\nThis is a classic speed-vs-gain trade-off in clocked comparators (StrongARM/double-tail types).",
        "format": "markdown",
        "sha256": "17f78c334a471534fa8884893918d587fb79e35544300c9823477125da189207"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that widening M7 increases tail current and decreases initial gain: input-pair transconductance grows more slowly than current, while the integration interval shortens. This matches the essential mechanism and trend.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 18959,
        "total_tokens": 21582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17715,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 18959,
        "total_tokens": 21582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17715,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, **M₇ is the clocked tail transistor** (gate driven by CK). When CK goes high, M₇ turns on and sinks a current \\(I_{SS}\\) from the common source node of the differential pair (M₁/M₂). Because its gate is driven by a full‑swing clock (\\(V_{DD}\\)) while its drain (the common‑source node) sits at only a few hundred millivolts, **M₇ operates in the triode (linear) region**. Consequently:\n\n\\[\nI_{SS} \\;\\approx\\; \\mu_n C_{ox}\\left(\\frac{W_7}{L_7}\\right)(V_{DD}-V_{th7})\\,V_S\n\\]\n\nso widening **W₇ directly increases the tail current** \\(I_{SS}\\).\n\n### What that does to the initial gain\n\n1. **Higher \\(I_{SS}\\) forces more current through M₁/M₂ and the cross‑coupled NMOS loads M₃/M₄.**  \n   Since M₃/M₄ are diode‑like loads tied to the outputs (initially at \\(V_{DD}\\)), a larger current means a larger voltage drop across them. This pulls the drain nodes of the input pair (**P** and **Q**) **lower**.\n\n2. **M₁/M₂ are pushed toward (or into) the triode region.**  \n   For M₁/M₂ to stay in saturation we need\n   \\[\n   V_P \\;\\ge\\; V_{in,CM} - V_{th}\n   \\]\n   As \\(I_{SS}\\) grows, \\(V_P\\) and \\(V_Q\\) fall, violating that condition. Once M₁/M₂ enter triode, their effective transconductance drops sharply:\n   \\[\n   g_{m1,2} \\;\\approx\\; \\mu_n C_{ox}\\left(\\frac{W_{1,2}}{L_{1,2}}\\right)V_{DS} \\;\\ll\\; \\sqrt{2\\mu_n C_{ox}(W/L)I_D}\n   \\]\n\n3. **Initial gain is set by \\(g_{m1,2}\\).**  \n   At the very start of comparison the PMOS cross‑coupled devices (M₅/M₆) are still off, so the small‑signal differential gain is essentially\n   \\[\n   A_{v0} \\;\\approx\\; \\frac{g_{m1,2}}{g_{ds1,2}+g_{ds3,4}} \\;\\propto\\; g_{m1,2}\n   \\]\n   Because \\(g_{m1,2}\\) collapses as M₁/M₂ leave saturation, **the initial voltage gain falls**.\n\n### Bottom line\n\n> **As the width of M₇ increases, the initial voltage gain decreases.**\n\nThe larger tail current drives nodes P/Q down, forces the input transistors M₁/M₂ into the triode region, lowers their transconductance, and therefore reduces the comparator’s starting (small‑signal) amplification before regeneration takes over.",
        "format": "markdown",
        "sha256": "578c99070c8885405371851d94f2e724b77ba68e636ac8a63de000f036a77287"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The trend and the fact that a wider M7 increases tail current are correct. However, the explanation relies on an unsupported claim that the input pair is driven into triode and treats the dynamic integration gain as a static gm/output-conductance gain; it misses the key gm/ICM effect that makes the initial gain decrease.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 33496,
        "total_tokens": 36119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 33496,
        "total_tokens": 36119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this StrongARM‑style latched comparator, **M7 is the clocked tail transistor**. When \\(CK\\) goes high, M7 turns on and sinks a tail current\n\n\\[\nI_{SS}\\;\\approx\\; \\frac{1}{2}\\mu_nC_{ox}\\left(\\frac{W}{L}\\right)_7(V_{DD}-V_{th})^2\n\\]\n\n(essentially a current set by its width). So **increasing \\(W_7\\) raises \\(I_{SS}\\)**.\n\n---\n\n### How the initial gain depends on \\(I_{SS}\\)\n\nBefore the cross‑coupled PMOS devices (\\(M_5,M_6\\)) turn on, the outputs discharge from \\(V_{DD}\\). The differential voltage that seeds regeneration is built up during the time it takes the common‑mode output to fall by \\(|V_{thp}|\\):\n\n\\[\nt_{\\text{on}} \\approx \\frac{2C|V_{thp}|}{I_{SS}} .\n\\]\n\nThe differential current produced by the input pair is\n\n\\[\n\\Delta I = g_{m1,2}\\,v_{in},\n\\qquad g_{m1,2}=\\sqrt{\\mu_nC_{ox}(W/L)_{1,2}I_{SS}} \\propto \\sqrt{I_{SS}} .\n\\]\n\nHence the **initial (pre‑regeneration) voltage gain** is\n\n\\[\nA_{v0}=\\frac{v_{out}(t_{\\text{on}})}{v_{in}}\n      \\approx \\frac{2g_{m1,2}|V_{thp}|}{I_{SS}}\n      \\propto \\frac{\\sqrt{I_{SS}}}{I_{SS}}\n      = \\frac{1}{\\sqrt{I_{SS}}}.\n\\]\n\n(Equivalently, \\(A_{v0}\\approx g_{m1}r_{o1}\\); since \\(g_m\\!\\propto\\!\\sqrt{I_{SS}}\\) but \\(r_o\\!\\propto\\!1/I_{SS}\\), the product also falls as \\(1/\\sqrt{I_{SS}}\\).)\n\n---\n\n### Conclusion\n\nBecause \\(W_7\\uparrow \\Rightarrow I_{SS}\\uparrow\\), the factor \\(1/\\sqrt{I_{SS}}\\) makes the gain smaller.\n\n> **The initial voltage gain decreases as the width of M7 increases.**\n\n*Trade‑off:* A larger \\(W_7\\) gives a larger tail current, so the comparator evaluates faster (\\(t_{\\text{on}}\\) shrinks), but the reduced \\(A_{v0}\\) means a smaller initial differential signal is presented to the regenerative latch, which generally worsens offset and noise sensitivity.",
        "format": "markdown",
        "sha256": "384ca61c0edc5c1f4c3e1e20d1c3294dbfd7cc264a72594708a5b273a37a341d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that increasing M7 width raises tail current and decreases initial gain, with a physically consistent explanation based on the input-pair transconductance growing more slowly than the current.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 26216,
        "total_tokens": 28839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 26216,
        "total_tokens": 28839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22758,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this clocked comparator / latch topology:\n\n- **M₁/M₂** form the input differential pair (tail **M₇** switched by **CK**).\n- **P** and **Q** are the drains of that pair—the intermediate nodes before the cross-coupled latch (**M₃/M₄/M₅/M₆**) that produces the outputs **X/Y (Vₒᵤₜ)**.\n- During evaluation (**CK** high), **M₁/M₂** steer current **I₁/I₂** into nodes **P/Q**. Those nodes discharge from **V_DD** downward.\n- The cross-coupled devices **M₃/M₄** (NMOS) turn on only when **P/Q** fall below **V_DD – V_th**; at that instant they connect **P/Q** to the latch nodes **X/Y**.\n\n### Why capacitance at P/Q matters\n\nThe time for each side to reach that threshold is:\n\n\\[\nt_{1,2} \\approx \\frac{C_{P,Q}\\,(V_{DD}-V_{th})}{I_{1,2}}\n\\]\n\nBecause the differential current is **I₁ – I₂ = g_m ΔV_in**, the two sides reach threshold at slightly different times:\n\n\\[\n\\Delta t = t_2 - t_1 \\;\\propto\\; \\frac{C_{P,Q}}{I_0^2}\\,g_m\\Delta V_{in}\n\\]\n\n**A larger capacitance at P and Q makes this time difference larger** (the nodes discharge more slowly, so the current imbalance takes longer to create a voltage separation).\n\nDuring that extra delay **Δt**, the “early” branch starts dumping charge into its latch node (**X** or **Y**) while the other latch node is still held at **V_DD**. The initial differential voltage that appears at **X/Y** is therefore roughly:\n\n\\[\n\\Delta V_{XY} \\;\\approx\\; \\frac{I_0}{C_X+C_{P,Q}}\\,\\Delta t\n\\;\\propto\\; \\frac{C_{P,Q}}{C_X+C_{P,Q}}\n\\]\n\nSo the **initial voltage gain**\n\n\\[\nA_{v0} = \\frac{\\Delta V_{XY}}{\\Delta V_{in}}\n\\]\n\n**increases** when you increase **C at nodes P and Q** (it grows from near-zero toward a saturation value **∝ g_m V_th/I_0**).\n\n### Short answer\n> **The initial voltage gain increases.**  \n> Larger capacitance at P/Q lengthens the turn-on delay between **M₃** and **M₄**, giving the differential current more time to create a larger initial voltage imbalance at the latch nodes **X/Y** before positive feedback (regeneration) takes over.\n\n*(Note: This is a classic feature of “double-tail” / separated-stage comparators: the intermediate-node capacitance is actually used to boost the effective initial gain, though too much capacitance will slow down the overall evaluation speed.)*",
        "format": "markdown",
        "sha256": "fb9da82aa1d3749ad42f30b68befddadc33b8f1e02d515455ba49c2da25283c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the essential result: increasing capacitance slows the transient but does not increase initial gain, because the longer amplification time is canceled by the smaller voltage slope. It recognizes the comparator topology and slower discharge, but its turn-on-skew explanation misses that cancellation.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 22866,
        "total_tokens": 25489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21238,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 22866,
        "total_tokens": 25489,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21238,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at the internal nodes **P** and **Q** **reduces (lowers) the initial voltage gain**.\n\n**Why:**  \nNodes P and Q are the drains of the input differential pair **M₁/M₂**. During the evaluation phase (when **CK** turns on and the tail **M₇** conducts), the differential input **ΔV_in** creates a differential current:\n\n\\[\n\\Delta I \\approx g_{m1,2}\\,\\Delta V_{in}\n\\]\n\nThis current charges/discharges the total capacitance **C** present at nodes P and Q (parasitic plus any explicit capacitance). The differential voltage that develops is essentially an integration of current over capacitance:\n\n\\[\n\\Delta V_{PQ}(t) \\approx \\frac{\\Delta I}{C}\\,t = \\frac{g_{m1,2}\\,\\Delta V_{in}}{C}\\,t\n\\]\n\nSo the **initial rate of voltage development** is:\n\n\\[\n\\frac{d}{dt}\\Delta V_{PQ} \\propto \\frac{1}{C}\n\\]\n\nIf **C** is increased:\n- The same differential current produces a **smaller voltage change** per unit time.\n- For a given evaluation window (or even until the cross‑coupled latch **M₃/M₄/M₅/M₆** turns on), the initial differential voltage **ΔV_PQ** is smaller.\n- Therefore the effective small‑signal gain from **V_in** to the internal nodes (and subsequently to the outputs **X/Y**) is **lower**.\n\nIn short: **Larger C at P and Q → slower voltage buildup → lower initial gain** (assuming operation within a fixed clock/evaluation period). Even in self‑timed operation, the larger capacitance lengthens the integration time required to reach the regeneration threshold, which generally degrades the speed and can reduce the effective gain available within a given clock cycle.",
        "format": "markdown",
        "sha256": "3d850c690489b07defae3406d8390ab2b13fc50104c6ff31ffb9074fb5ee8b70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that larger capacitance slows the voltage buildup, but incorrectly concludes that the initial gain decreases. The longer amplification interval offsets the smaller voltage slope, leaving the gain at regeneration onset approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 23204,
        "total_tokens": 25827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23486,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 23204,
        "total_tokens": 25827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23486,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this latch-based comparator (a StrongARM-type topology with cross-coupled PMOS loads **M5/M6** and cross-coupled NMOS **M3/M4**), the key points are:\n\n- **Nodes P and Q** are the drains of the input differential pair (**M1/M2**) and the sources of the positive-feedback NMOS pair (**M3/M4**).\n- During the evaluation phase (CK high), **M7** turns on and **M1/M2** steer the tail current. Because the pre-charge switches (**S1–S4**) have just opened, nodes **P/Q** and outputs **X/Y** are floating at ~VDD.\n- The cross-coupled NMOS **M3/M4** are **initially off** because their sources (**P/Q**) and gates (**X/Y**) are both at VDD (so V_GS ≈ 0). The input current difference first discharges **C_P** and **C_Q**.\n- Only after **V_P** or **V_Q** drops by ~V_th do **M3/M4** turn on, connecting the internal nodes to the outputs and triggering regeneration.\n\n### Effect of increasing C_P and C_Q\n\nIf you increase the capacitance at **P** and **Q**:\n\n1. **Slower discharge:** For a given differential current ΔI = g_m·v_in, the rate of voltage drop is  \n   dV/dt = ΔI / C_P,Q.  \n   Larger capacitance means **P/Q fall more slowly**.\n\n2. **Delayed positive feedback:** **M3/M4** turn on later because it takes more time (and more charge) to pull **P/Q** down by V_th.\n\n3. **Reduced initial output step:** Before **M3/M4** conduct, outputs **X/Y** stay at VDD. Once they do turn on, the initial differential voltage developed at **X/Y** is smaller because a larger share of the input current is consumed charging/discharging the larger **C_P/C_Q** rather than being transferred to the output capacitances.\n\n4. **Lower effective loop gain at startup:** The small-signal transconductance of **M3/M4** is degraded when their source nodes have high impedance; larger **C_P/Q** introduces a lower-frequency pole that reduces the effective **g_m** available for regeneration at the critical initial moment.\n\n### Conclusion\n\n**The initial voltage gain decreases (is reduced).** \n\nA larger capacitance at **P** and **Q** acts as a “brake” on the initial transient: it delays the activation of the cross-coupled positive-feedback loop (**M3/M4**) and reduces the rate at which the differential voltage is developed at the outputs **V_out** (nodes **X/Y**) for a given small input **v_in**. Thus **A_v,init = ΔV_out/ΔV_in** is lowered.",
        "format": "markdown",
        "sha256": "6491853c2081f652ddad3556efa578b8f5d50f6c76ea2ebad0fe73dcdee2ee51"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the discharge and delays regeneration, but it concludes that the initial gain decreases. The longer amplification interval offsets the slower voltage buildup, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 24358,
        "total_tokens": 26981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2623,
        "output_tokens": 24358,
        "total_tokens": 26981,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, **M₅ and M₆ are the cross‑coupled PMOS devices** that form a regenerative latch together with M₃/M₄ (NMOS). Their gates are connected to the opposite outputs (Y → M₅, X → M₆), and their drains/sources sit on the floating nodes **X** and **Y**.\n\nIf you increase the widths of M₅ and M₆, **the speed degrades**. Here is why:\n\n### 1. The differential pair sees a heavier load\nDuring evaluation (CK high), M₇ turns on and the differential pair **M₁/M₂** develops a small voltage difference at nodes **P** and **Q**. Initially, **M₃** and **M₄** are ON (their gates are at VDD because X and Y were precharged high), so **P is coupled to X** and **Q is coupled to Y**.\n\nWider M₅/M₆ add:\n- **Drain diffusion capacitance** directly on X and Y\n- **Gate capacitance** on the opposite node (M₅’s gate loads Y, M₆’s gate loads X)\n\nThis larger capacitance at X/Y is reflected back through M₃/M₄ to nodes **P and Q**. The current‑mode differential pair **M₁/M₂** must now charge/discharge this larger effective load to build up the differential voltage, so the **initial “sensing” phase slows down**.\n\n### 2. PMOS efficiency is lower than NMOS\nRegeneration speed is governed by the time constant of the cross‑coupled loop:\n\\[\n\\tau \\approx \\frac{C_X}{g_{m3}+g_{m5}}\n\\]\n\nBecause μₚ < μₙ, widening a PMOS transistor gives a **smaller gₘ boost per unit width** than the capacitance it adds (C₉ ∝ W, C_d ∝ W). Thus the ratio C/gₘ does not improve proportionally; in many cases it actually gets worse.\n\n### 3. Contention / feedback delay\nOnce regeneration starts, M₅/M₆ do provide positive feedback, but because they are now very wide, they also present a **large capacitive burden** that must be driven by the opposite side’s NMOS device (M₃/M₄). The net result is that the **overall clock‑to‑Q delay increases**.\n\n---\n\n**Bottom line:** Wider M₅/M₆ increase parasitic capacitance at the floating latch nodes X and Y, which loads the critical differential‑pair outputs P/Q through M₃/M₄. The sensing delay dominates, so **speed degrades** rather than improves.\n\n> **Tip:** In this topology, M₅/M₆ are usually sized to be **just strong enough** to trigger regeneration quickly, but not so large that they swamp the differential pair with extra capacitance.",
        "format": "markdown",
        "sha256": "6e615c1b55b921971b50ab620874590241f631b83e1f00251032a87be2a712ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as cross-coupled PMOS devices and notes a real capacitance penalty, but reaches the opposite conclusion: widening initially strengthens regeneration and improves speed; capacitance limits the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 25199,
        "total_tokens": 27821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 25199,
        "total_tokens": 27821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit (a **sense-amplifier–based flip-flop / C²MOS latch**), **M5 and M6 are cross-coupled PMOS pull-up devices** tied to $V_{DD}$; M3/M4 are the cross-coupled NMOS pull-down devices, and the bottom stage (M1/M2/M7) is the clocked differential input pair.\n\nIf you increase the widths of **M5 and M6**:\n\n1. **Parasitic capacitance increases** at nodes X and Y ($C_{db}$, $C_{gd}$ scale with $W$).  \n2. **They fight the evaluation phase:** When $CK$ goes high, the differential pair (M1/M2) tries to pull nodes P/Q (and thus X/Y through M3/M4) downward to develop the small differential voltage needed to trigger regeneration. Stronger PMOS loads supply more opposing current to $V_{DD}$, so the input stage needs **more time** to drag X or Y down far enough to turn on the opposite PMOS and start positive feedback.\n3. **Regeneration time constant** $\\tau \\approx C/(g_{m3}+g_{m5})$ does not improve enough to compensate: while $g_{m5}$ rises with $W$, the load capacitance $C$ also rises proportionally, so $\\tau$ stays roughly constant or improves only marginally. The **initial decision delay** ($\\propto C$) dominates and gets worse.\n\nTherefore, the overall evaluation / clock-to-output delay **increases**.\n\n### Answer: **Speed degrades** (performance worsens).\n\nIn short: wider M5/M6 = stronger pull-up contention + heavier capacitive load = slower initiation of regeneration. They are usually sized **weak** relative to the NMOS devices specifically to avoid this slowdown.",
        "format": "markdown",
        "sha256": "df93c88f66f74baa74d670dd312538ae64c407dff0074b5ee9af1f8759b9903c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the correct initial trend. It notes the added capacitance and increased transconductance, but incorrectly concludes that loading and pull-up contention dominate; initially, stronger regeneration wins and speed improves.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 20576,
        "total_tokens": 23198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 20576,
        "total_tokens": 23198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18954,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, **M5 and M6 are the cross-coupled PMOS devices** tied to VDD (their gates are connected to the opposite outputs, Y and X, respectively). They form the positive-feedback “pull-up” half of the regenerative latch together with the cross-coupled NMOS devices M3/M4.\n\n### What happens if you make M5 and M6 wider?\n\n| Effect | Consequence |\n|--------|-------------|\n| **Drive current (gₘ)** | Increases proportionally to width → stronger pull-up current. |\n| **Parasitic capacitance** | **Increases linearly with width:** <br>• Gate capacitance of M5 loads node **Y**; gate of M6 loads node **X** (cross-coupling). <br>• Drain/bulk capacitance of M5/M6 loads nodes **X** and **Y** locally. |\n\nBecause M5 and M6 are **cross-coupled**, their larger gates directly add to the load capacitance on the very nodes they are trying to switch. The regeneration time constant of the latch is roughly\n\n\\[\n\\tau_{\\text{reg}} \\approx \\frac{C_X}{g_{m5}+g_{m6}+\\dots}\n\\]\n\nWhile \\(g_m\\) grows with width, the load capacitance \\(C_X\\) (and \\(C_Y\\)) grows at essentially the same rate because of the self-loading through the cross-coupled gates. More importantly, during the **integration phase** (before regeneration takes over), the differential pair M1/M2 must develop a small voltage difference across nodes P/Q, which are coupled to X/Y through M3/M4. The larger capacitance at X and Y therefore slows down the initial development of that difference.\n\nIn practice, for this type of sense-amplifier / regenerative latch topology, **the added capacitive loading dominates**, so the loop becomes slower to respond and the clock-to-output delay increases.\n\n### Conclusion\n**The speed degrades.** Increasing the widths of M5 and M6 makes the cross-coupled latch “heavier” without providing a net speed benefit; the extra parasitic capacitance on nodes X and Y slows both the initial differential development and the regenerative switching.\n\n---\n\n**Short answer:** **Degrade** — because M5/M6 are cross-coupled PMOS loads; wider devices increase the capacitance on nodes X and Y (via their cross-coupled gates and drains), which outweighs the gain in drive current and slows the latch.",
        "format": "markdown",
        "sha256": "b59736ef094ce5fa101092a149c18704a0ab84767ab468e2e34710048fbfabab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the cross-coupled PMOS devices and the competing transconductance and capacitance effects, but incorrectly concludes that added capacitance dominates initially. The expected trend is faster regeneration at first, with diminishing returns or degradation only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 24176,
        "total_tokens": 26798,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2622,
        "output_tokens": 24176,
        "total_tokens": 26798,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the circuit, the **speed degrades** if you widen the clocked transistors (those with gates $\\overline{CK}$ and $CK$).\n\n### Why?\n\nThe clocked devices have their drain/source junctions connected to the internal high-impedance nodes **X** and **Y** (and to the clock lines themselves). Widening them has two main effects:\n\n| Effect | Impact on Speed |\n|--------|----------------|\n| **On-resistance ($R_{on}$)** decreases | Slightly improves current delivery |\n| **Parasitic capacitance ($C_{db}, C_{sb}$)** on nodes **X** and **Y** increases proportionally | **Dominates** — slows down transitions |\n| **Clock load ($C_g$)** on $\\overline{CK}$ and $CK$ increases | Slows clock edges, degrading $t_{c\\text{-}q}$ |\n\n### Key Point\nNodes **X** and **Y** are regenerative/dynamic nodes whose voltage must switch quickly to determine the final state (via the cross-coupled devices $M_1$ and inverter **Inv3**). The delay of a regenerative latch is roughly proportional to $C_{node}/g_m$. Because widening the clocked transistors increases $C_X$ and $C_Y$ significantly while $g_m$ of the regenerative path is set by $M_1$, the **capacitive loading dominates**.\n\nAdditionally, heavier clock loading means $\\overline{CK}$ and $CK$ have slower rise/fall times, which directly increases the clock-to-output delay and can cause race conditions.\n\n**Bottom line:** Although lower $R_{on}$ seems beneficial, the added parasitic capacitance on the sensitive internal nodes **X** and **Y** (plus clock-network loading) makes the flip-flop **slower**. There is an optimal width; making them wider degrades performance.\n\n---\n\n*Note: This is a classic result for differential/clocked CMOS flip-flops (e.g., C²MOS or SAFF-style topologies): clocked switch widths should be chosen to balance $R_{on}$ against the capacitance they inject onto critical nodes, not simply maximized.*",
        "format": "markdown",
        "sha256": "315a2906fe96a0e5415f57f10b4f14193553fec894b92ffdb64c60a1f5f5f4db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the added capacitance as a real limitation, but concludes that widening degrades speed rather than stating the required initial speed improvement from reduced on-resistance.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 10098,
        "total_tokens": 12221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 10098,
        "total_tokens": 12221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** The speed **degrades** (the delay gets longer).\n\n---\n\n### Why widening the clocked devices hurts performance here\n\nIn the figure, the clocked transistors (those whose gates are driven by **CK** or **$\\overline{CK}$**) are stacked in series with the cross‑coupled NMOS devices labeled **M₁**. Nodes **X** and **Y** are the internal latch nodes of this regenerative structure; they drive the inverter **Inv₃** (which produces **Z**) and also control the opposite **M₁** transistor via cross‑coupling.\n\nIf you increase the width **W** of the clocked transistors, two things happen:\n\n| Effect | Consequence |\n|--------|-------------|\n| **On‑resistance drops** ($R_\\text{on} \\propto 1/W$) | Good – current can flow more easily. |\n| **Diffusion capacitance at X and Y grows** ($C_\\text{diff} \\propto W$) | Bad – nodes X and Y become “heavier.” |\n| **Clock load increases** ($C_g \\propto W$) | Bad – the clock edges slow down globally. |\n\nBecause **M₁** is a *fixed‑width* transistor in the same stack, the total resistance of the discharge path can never fall below $R_{M_1}$. Thus, once the clocked device is already fairly wide, further widening gives almost no resistance benefit, but **the parasitic capacitance at X and Y keeps growing**.\n\nThe switching speed of this circuit is dominated by how fast the regenerative nodes **X** and **Y** can flip. That regeneration time is essentially\n\n$$\\tau_\\text{regen} \\approx \\frac{C_X}{g_{m1}-g_\\text{load}} \\;\\propto\\; C_X$$\n\nwhere $C_X$ includes:\n- the load of **Inv₃**,\n- the diffusion capacitance of the clocked transistor connected to X,\n- and the diffusion capacitance of the pull‑up devices.\n\nSince $g_{m1}$ of the cross‑coupled device **M₁** does **not** increase when you widen the clocked transistors, a larger $C_X$ (and $C_Y$) directly **slows regeneration**.\n\nMathematically, for a series stack (clocked NMOS + M₁) discharging node X:\n\n$$\\tau \\approx (R_\\text{ck}+R_{M_1})\\,(C_\\text{load}+C_\\text{diff,ck})$$\n\nAs $W_\\text{ck} \\to \\infty$:\n- $R_\\text{ck} \\to 0$,\n- but $C_\\text{diff,ck} \\propto W_\\text{ck} \\to \\infty$,\n- so $\\tau \\to R_{M_1}\\,C_\\text{diff,ck} \\to \\infty$.\n\nTherefore, **beyond a certain (often quite small) optimum width, making the clocked transistors wider only makes nodes X and Y harder to switch**, degrading both the precharge/evaluate speed and the latch regeneration speed.\n\n---\n\n### Bottom line\n- **Resistance improves** (lower $R_\\text{on}$).\n- **Capacitance on X/Y worsens** (larger $C_\\text{diff}$).\n- **Because M₁ fixes the series resistance floor**, the capacitance term wins.\n- **Net result:** Clock‑to‑output delay **increases**; speed **degrades**.\n\nSo if you are sizing this flip‑flop / latch, you should **not** blindly maximize the clocked transistor widths; they should be sized near the optimum that balances $R_\\text{on}$ against the parasitic load on X and Y.",
        "format": "markdown",
        "sha256": "b70f56a8f4ff33af73e7ad6e54a7c1fb2c3a97716547338c5c3aa3b1f1204ee5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the resistance-versus-capacitance tradeoff, but concludes that widening degrades speed rather than identifying the initial speed improvement from reduced clocked-device on-resistance. The golden solution assigns 2 to answers concluding that speed degrades.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 16921,
        "total_tokens": 19044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 16921,
        "total_tokens": 19044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** **The speed degrades.**\n\n---\n\n### Why increasing the clocked-transistor widths hurts speed\n\nThe devices whose gates are driven by **CK** and **$\\overline{CK}$** (the two “clocked” transistors in each vertical stack, plus the $\\overline{CK}$‑controlled device at the top of each branch) serve as **clocked switches** that turn the pull‑up / pull‑down paths on and off.\n\nIf you widen those clocked transistors ($W\\uparrow$) you get two competing effects:\n\n| Effect | Consequence |\n|--------|-------------|\n| **$R_{on}\\downarrow$** (lower resistance) | Would help charge/discharge the internal nodes **X** and **Y** faster. |\n| **$C_g\\uparrow$** (larger gate capacitance) | Directly loads the **clock distribution network**. The $\\overline{CK}/CK$ drivers must now charge/discharge a larger total capacitance, so the clock edges become **slower and more skewed**. |\n| **$C_{db}, C_{sb}\\uparrow$** (larger diffusion capacitance) | Each clocked transistor is physically connected to nodes **X** and **Y**. Wider devices add more parasitic capacitance to those high‑impedance internal nodes, so more charge is required to swing **X** / **Y** between $V_{DD}$ and ground. |\n| **Clock feedthrough / overlap** | Wider clocked devices increase clock feedthrough to nodes X and Y, which can cause false switching and lengthen the evaluation window. |\n\n### Which effect dominates?\n\nIn this differential / dynamic structure (two cross‑coupled evaluation branches feeding inverter **Inv3**), the clocked switches are **in series** with the data transistor **M1** (the transistor actually controlled by the input data). Because **M1** is the intended current‑limiting device, the resistance of the clocked transistors is already relatively small compared with $R_{M1}$. Therefore:\n\n* The **$1/W$ reduction in $R_{on}$** gives only diminishing returns for the discharge/charge current.\n* The **linear $W$ increase in $C_g$ and $C_{diff}$** dominates the RC delay at nodes **X** and **Y** and also slows the global clock.\n\nSo the time needed to develop a reliable differential voltage between **X** and **Y** (and therefore the clock‑to‑output delay of **Z**) **increases**, and the maximum operating frequency **falls**.\n\n---\n\n### Bottom line\n\n> **Do not simply “size up” the clocked transistors.** Their width should be chosen at the **minimum** value that keeps $R_{on}$ acceptably small (typically comparable to $R_{M1}$ or slightly smaller). Beyond that point, the **capacitance penalty**—both on the clock net and on the sensitive internal nodes **X** / **Y**—overwhelms any resistance benefit, and **speed degrades**.\n\nIf you need faster operation, it is usually better to:\n* Optimize **M1** (data transistor) and the load of **Inv3**,\n* Use **local clock buffering** rather than making every clocked device huge,\n* Or apply **transistor sizing optimization** (e.g., logical effort / $t_{pd}$ minimization) specifically for the series stack, rather than blindly widening the clocked devices.",
        "format": "markdown",
        "sha256": "70824af5877ca295f55393f5682a9b76f5430fd62bcca9fc7fde74eb679263cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the resistance-versus-capacitance tradeoff, but incorrectly concludes that widening degrades speed. The expected trend is initial speed improvement from lower on-resistance, with added capacitance limiting or eventually reversing the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 16136,
        "total_tokens": 18259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 16136,
        "total_tokens": 18259,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No – by itself this block does not give quadrature (90°) outputs.**\n\nWhy:\n\n* The left and right “lanes” are **mirror branches** driven by complementary clocks (`CK` / `CK̅`). They are **parallel, not independent** outputs: the horizontal line joins their center nodes, so **X = Y** (one common node).\n* Each branch is a clocked path (PMOS/NMOS stacks with clock gates plus a feedback keeper transistor `M1`). Together they implement a **single dual‑edge‑activated latch/divider core** that updates the common node `X=Y` on both clock phases.\n* The only explicit output port shown is **Z**, taken through inverter **Inv₃**:  \n\n  \\[\n  Z = \\overline{Y} = \\overline{X}\n  \\]\n\n  So the two accessible signals are a node and its complement — i.e. **differential (180° apart)**, not quadrature.\n\n* To obtain true **I/Q (quadrature) outputs** you need **two such cores cross‑coupled** (for example in a quadrature injection‑locked frequency divider), so that one core’s output forces the other to sit 90° apart. A single structure as drawn only provides one signal and its inverse.\n\n**Bottom line:** The figure is a single divide‑by‑2 / clocked‑latch core (TSPC‑style). It yields a single output `Z` (plus internal `X=Y`), which is 180° inverted from `Z`, **not** 90° quadrature. Quadrature generation requires pairing two of these blocks with cross‑coupling.",
        "format": "markdown",
        "sha256": "a2bce5ba214638a7b03fd6057cd2bf2c01922ff8ad76b794d0accc69a3c00612"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly recognizes a divider/latch structure and inverter, but misreads X and Y as shorted. They are distinct latch outputs that switch on opposite clock phases, giving nominal quadrature; the stated conclusion and topology explanation are therefore wrong.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 23529,
        "total_tokens": 25637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 23529,
        "total_tokens": 25637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: No — this structure does not give quadrature (I/Q) outputs.**\n\n**Why:**\n\n1. **Only one signal node is created.**  \n   The horizontal line with the two black dots ties the left and right center nodes together, so **X and Y are the same electrical node** (they are just labeled at two places on the same net). The left/right transistor stacks therefore work together as a single dynamic latch/divider stage, not as two independent outputs.\n\n2. **The inverter only produces the complement.**  \n   The right-hand branch feeds node **Y (= X)** into **Inv₃**, so:\n   \\[\n   Z = \\overline{Y} = \\overline{X}\n   \\]\n   Thus the two accessible outputs are **X (or Y)** and **Z**, which are **180° apart** (differential / complementary).\n\n3. **No 90° phase shift is generated.**  \n   Quadrature outputs require two signals at the same frequency with a **90° phase difference** (e.g. 0° and 90°). Because X/Y and Z are simply a signal and its inverse, their phase separation is 180°, not 90°.\n\n4. **What the circuit actually is.**  \n   This is a typical **TSPC-style (true-single-phase-clock) divider / dual-modulus prescaler core** (divide-by-2 or divide-by-3). It produces a **single-phase** output at half (or 2/3) the clock rate, plus its inverted version for differential signaling.\n\n**Bottom line:**  \nTo obtain quadrature outputs you would need either:\n- a **divide-by-4** architecture (which naturally yields 0°/90°/180°/270° phases), or  \n- an additional phase-shifting network (e.g., polyphase filter, second divider stage, or quadrature oscillator).\n\nSo, **as drawn, the figure provides differential (0°/180°) outputs, not quadrature (0°/90°) outputs.**",
        "format": "markdown",
        "sha256": "c57ef66fce3c29c4fbe7f89ddc33f063e19b6b8da76edac478902c03a3a9f357"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats X and Y as the same node, missing the two opposite-phase latches that produce nominal quadrature. Its inverter observation is relevant, but the central conclusion rests on a mistaken topology.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 7560,
        "total_tokens": 9668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 7560,
        "total_tokens": 9668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this CMOS circuit, **yes — the structure is designed to provide quadrature outputs** (specifically, outputs **X** and **Y** are intended to be 90° out of phase).\n\n### Why it provides quadrature outputs:\n\n1. **Complementary clocking of two branches:** The left and right branches are not identical copies; they are clocked differently by the complementary clock signals ($CK$ and $\\overline{CK}$) at different transistor positions. One branch is transparent/evaluated on one clock phase, while the other is evaluated on the opposite phase.\n\n2. **Master–slave / dual-latch behavior:** The figure shows two dynamic latch-like stages (each with PMOS pull-up to $V_{DD}$, NMOS pull-down to ground via transistor $M_1$, and clock-controlled transistor stacks). When arranged as a divide-by-2 or master–slave structure, the internal/output nodes of such complementary clocked stages naturally sit 90° apart in phase at the output frequency ($f_{CK}/2$).\n\n3. **Two distinct outputs:** Node **X** (left branch) and node **Y** (right branch) are separate nodes (the horizontal line is cross-coupling/connection between stages, not a short). The inverter $\\text{Inv}_3$ takes **Y** and produces **Z** = $\\overline{Y}$, giving both the quadrature signal and its complement.\n\n4. **Phase relationship:** Because the branches sample/hold on opposite edges of $CK/\\overline{CK}$, the waveforms at **X** and **Y** are quadrature ($I$ and $Q$). Thus the structure yields quadrature outputs (**X** and **Y**) plus a complementary version **Z** of **Y**.\n\n### Key distinction:\n- **X vs. Y:** Quadrature (90° phase difference) — this is the intended operation.\n- **Y vs. Z:** Complementary (180° phase difference) via $\\text{Inv}_3$.\n\nSo the answer is **Yes**: the dual-branch, complementary-clock architecture provides quadrature outputs (**X** and **Y**).",
        "format": "markdown",
        "sha256": "ea4cb8d7a8e017aa5ca65606d96dd92ad18a1787bfa4518aa18a0b9dbf4b7d5e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship between X and Y, but omits both reasons the outputs are not exactly in quadrature: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 12767,
        "total_tokens": 14875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2108,
        "output_tokens": 12767,
        "total_tokens": 14875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, this is a **regenerative clocked latch / sense amplifier** (a StrongARM-like topology). The four transistors whose gates are driven by **CK** are “switch” devices:\n\n* **Two upper PMOS** (connected to $V_{DD}$): they **precharge** the two internal nodes to $V_{DD}$ when $\\overline{CK}$ is low.\n* **Two lower NMOS** (connected to GND): they turn **on** during evaluation when $CK$ goes high, providing a discharge path to ground.\n\nThe cross-coupled devices in the middle form a **positive-feedback loop**. Once a small differential voltage appears, the loop regenerates it exponentially until one side is fully low and the other is high.\n\n---\n\n### What happens if we make the clocked devices wider?\n\n| Effect of increasing $W$ | Consequence |\n|---|---|\n| **On-resistance $R_{on}$ drops** ($R_{on} \\propto 1/W$) | Better current drive during precharge/evaluation. |\n| **Drain/source capacitance ($C_{db}, C_{sb}, C_{gd}$) rises** ($\\propto W$) | **Adds directly to the internal node capacitance** $C_{node}$. |\n| **Gate capacitance ($C_{g}$) rises** ($\\propto W$) | Loads the $CK$ line, slowing clock edges. |\n\nThe key point is that **speed is governed by regeneration**, not by $R_{on}$.\n\nDuring evaluation the clocked PMOS are **off** and the clocked NMOS are **on**, but they are **not part of the feedback loop**—their gates are driven by the global clock, so they contribute **no $g_m$ to the regeneration**. The regeneration time constant is:\n\n$$\\tau \\approx \\frac{C_{node}}{g_{m,\\text{feedback}}}$$\n\nwhere $g_{m,\\text{feedback}}$ is set by the cross-coupled devices. Because $C_{node}$ includes the diffusion capacitance of the clocked switches, making them wider **increases $C_{node}$ linearly with $W$** while $g_{m,\\text{feedback}}$ stays unchanged. Thus $\\tau$ grows.\n\nEven for precharge, $R_{on} \\propto 1/W$ but the load capacitance also contains a term $\\propto W$, so the RC product saturates rather than improving.\n\n---\n\n### Conclusion\n\n**The speed degrades.**\n\nWider clocked transistors increase the parasitic capacitance on the internal nodes (and load the clock net) more than they help via lower $R_{on}$. Because the latch’s delay is dominated by the regeneration time constant $\\tau = C/g_m$, the net effect of increasing the clocked transistor widths is a **slower response**.\n\n> **Short answer:** **Degrade** — because $C_{node}$ rises with $W$ while the feedback $g_m$ does not, slowing regeneration.",
        "format": "markdown",
        "sha256": "e75ed97f6eab5a33d6b38eb1952141f15c422093a5a6e3492033517359125468"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked devices degrades speed, contrary to the key result: their lower on-resistance improves speed, while their added capacitance is largely outside the data path. Charge sharing degrades swing but is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 12915,
        "total_tokens": 15194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 12915,
        "total_tokens": 15194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13451,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a classic differential clocked flip‑flop / latch (essentially a cross‑coupled regenerative cell with series clocked switches—two PMOS devices gated by $\\overline{CK}$ to $V_{DD}$ and two NMOS devices gated by $CK$ to ground).\n\n**Short answer:** **The speed degrades.**\n\n### Why?\n\nThe clocked transistors are **switches**, not gain devices. When you increase their width $W$:\n\n| Effect | Scaling with $W$ | Impact |\n|--------|------------------|--------|\n| **On‑resistance** $R_{on}$ | $\\propto 1/W$ | Better current flow (seems helpful) |\n| **Gate capacitance** $C_g$ | $\\propto W$ | Heavier load on $CK$ and $\\overline{CK}$ |\n| **Drain/source diffusion capacitance** $C_{diff}$ | $\\propto W$ | Adds directly to the internal node capacitances |\n\nSo we have two competing effects, but the **negative effects dominate**:\n\n1. **Clock loading:** The $CK$ and $\\overline{CK}$ drivers must now charge/discharge larger $C_g$. Slower clock edges mean the latch takes longer to turn on/off, reducing the effective time available for regeneration and increasing the clock‑to‑output delay.\n\n2. **Internal node loading (the dominant factor):** The diffusion capacitance of the clocked devices sits directly on the two cross‑coupled internal nodes. Because $R_{on} \\propto 1/W$ while $C_{diff} \\propto W$, the $R_{on}C_{diff}$ product is **roughly constant**—you do not get a faster RC charging time at those nodes. Meanwhile, any other load capacitance (interconnect, input devices) sees a reduced $R_{on}$, but the **total node capacitance has grown**, so the regeneration time constant\n   $$\\tau_{regen} \\approx \\frac{C_{node}}{g_{m,eff}}$$\n   actually increases because $C_{node}$ now includes the larger $C_{diff}$ of the clocked switches.\n\n3. **Regeneration speed:** In this latch, speed is set by how fast the cross‑coupled pairs can regenerate. A larger $C_{node}$ directly slows that positive‑feedback process.\n\n### Conclusion\nBecause the benefit of lower $R_{on}$ is cancelled (or outweighed) by the linear increase in both **clock capacitance** and **internal diffusion capacitance**, increasing the widths of the clocked transistors **degrades** the overall speed of the circuit. In practice, these devices are sized just large enough to avoid being a bottleneck, but not so large that they excessively load the clock and internal nodes.",
        "format": "markdown",
        "sha256": "e49787086a2348a4433b26c6253121eefc25309dd5aae996b709fd5a84c5c28c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that widening the clocked transistors degrades speed, contrary to the key result: their lower on-resistance improves speed while their added capacitance is largely off the data path. It also misses the acceptable charge-sharing limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2279,
        "output_tokens": 11322,
        "total_tokens": 13601,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11781,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2279,
        "output_tokens": 11322,
        "total_tokens": 13601,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11781,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:**  \nThe **intrinsic speed of the stage improves** (its charging/discharging delay gets smaller), but the benefit is **sub‑linear** and comes at the cost of heavier clock loading.\n\n---\n\n### Why the local delay improves\n\nThe four clocked devices (the two PMOS devices tied to \\(V_{DD}\\) and the two NMOS “footer” devices tied to ground) are **in series** with the cross‑coupled logic path.  \nIf we widen them:\n\n* **On‑resistance falls** as \\(R_{on}\\propto 1/W\\).  \n  This directly reduces the RC time constant that charges/discharges the output nodes (the nodes that feed the inverter and the feedback loop).\n* Therefore the **precharge** (through the PMOS devices when \\(\\overline{CK}\\) is active) and **evaluation** (through the NMOS devices when \\(CK\\) is high) become faster.\n\nIn a simple series model the delay is roughly\n\n\\[\n\\tau \\approx (R_{\\text{logic}}+R_{\\text{clk}})\\,C_{L} \\;+\\; R_{\\text{clk}}C_{\\text{int}}\n\\]\n\nBecause \\(R_{\\text{clk}}\\propto 1/W\\), both terms decrease as \\(W\\) grows.\n\n### The “catch”: self‑loading and clock loading\n\nEven though the delay falls, it does **not** fall forever:\n\n1. **Self‑loading (diffusion capacitance).**  \n   The drain/source diffusion capacitance of each clocked transistor scales with width: \\(C_{db}\\propto W\\). Since \\(R_{on}\\propto 1/W\\), the product \\(R_{on}C_{db}\\) is essentially **constant** (the intrinsic delay of the transistor itself). Thus as \\(W\\to\\infty\\),\n\n   \\[\n   \\tau \\;\\to\\; R_{\\text{logic}}C_{L} \\;+\\; \\text{constant}\n   \\]\n\n   The speed improves, but with **diminishing returns**.\n\n2. **Clock load.**  \n   The gate capacitance of each clocked device is \\(C_g\\propto W\\). The clock driver must charge/discharge all of these gates. If the clock tree is not ideal, a larger \\(W\\) slows down the clock edges, which can reduce the maximum operating frequency and increase short‑circuit current.\n\n3. **Loading on the feedback inverter.**  \n   The inverter that closes the feedback loop (left branch → inverter → right branch) must drive the diffusion capacitance of the left branch’s clocked devices. Wider devices mean a larger load on that inverter, which can slow the regeneration of the latch.\n\n### Bottom line for the figure\n\nBecause the clocked devices are **series switches**, reducing their resistance helps the local charging/discharging. So **speed improves** (delay decreases) when you widen them—at least until the self‑loading term dominates.\n\nHowever, in a practical design you would **not** make them arbitrarily wide: the clock load and the extra diffusion capacitance on internal nodes mean there is an **optimum width**; beyond that point the global performance (maximum clock frequency, power, noise margin) can actually **degrade**.\n\nSo, for the circuit shown:\n\n> **Widening the clocked transistors improves the local RC speed, but because of self‑loading (\\(R_{on}C_{db}\\) = const) and increased clock capacitance, the benefit is bounded and eventually counter‑productive for overall performance.**",
        "format": "markdown",
        "sha256": "6c93704602fdc00637ade74e4875f104a79fdee803ebfb606599cfa589e2cc18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly concludes that widening improves speed because the clocked devices’ on-resistance falls. However, it omits the key charge-sharing effect and adds questionable claims about output/feedback loading and an eventual optimum width.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2279,
        "output_tokens": 29448,
        "total_tokens": 31727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2279,
        "output_tokens": 29448,
        "total_tokens": 31727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This figure shows a **clock‑controlled, segmented ring (feedback loop)** built from three active stages and two complementary switches.\n\n### 1. Topology & Components\n- **Feedback loop:** The long horizontal line at the bottom closes the path from the far‑right output back to the far‑left node, forming a circular ring.\n- **Active stages (top path, left → right):**\n  - **Inv₁:** Explicitly labeled inverter (triangle with inversion function).\n  - **Stage 2 & Stage 3:** Two additional triangular stages (buffers or inverters) that complete the chain.\n- **Controlled switches / transmission gates:** Two break points are inserted in series along the loop:\n  - **Switch CK:** Between the feedback node and the input of Inv₁, controlled by clock signal **CK**.\n  - **Switch $\\overline{CK}$:** Between the output of Inv₁ and the input of Stage 2, controlled by the complementary clock **$\\overline{CK}$**.\n\n### 2. Connectivity\n```\nFeedback node (left) ──[CK]──► Inv₁ ──[$\\overline{CK}$]──► Stage 2 ──► Stage 3 ──► Feedback node (right)\n            │                                                                  │\n            └──────────────────────────────────────────────────────────────────┘\n```\nBecause **CK** and **$\\overline{CK}$** are complementary, the two switches are **never simultaneously closed** in steady state:\n- When **CK = 1**: The left switch is closed; Inv₁ is connected to the loop input, but its output is isolated from Stage 2.\n- When **CK = 0**: The right switch is closed; Inv₁ drives Stage 2 → Stage 3 → back to the loop node, but Inv₁’s input is isolated from the feedback.\n\n### 3. Functional Analysis\n- **Odd inversion:** If all three stages are inverting, the loop contains 3 inversions (odd). A fully closed 3‑stage ring would be a **free‑running ring oscillator**.\n- **Segmented / clocked operation:** The complementary switches **prevent continuous circulation**. Instead, they divide the loop into two time‑multiplexed segments:\n  - **Phase CK = 1:** Inv₁ “samples” the value from the feedback node.\n  - **Phase CK = 0:** The computed value propagates through the remaining stages and updates the feedback node.\n- **Result:** The circuit behaves as a **dynamically segmented delay line** or a **clock‑gated oscillator/test path**. It can be used for:\n  - **Delay / frequency characterization** (e.g., isolating Inv₁ to measure its individual delay).\n  - **Oscillation‑based BIST (Built‑In Self‑Test)** where the ring is enabled/disabled by clock phases.\n  - **Phased pipeline / clock generation** where signal advances around the loop over two clock phases rather than continuously.\n\n### 4. Key Takeaway\nThe arrangement is **not a simple static feedback amplifier**; it is a **clock‑controlled ring with intentionally broken continuity**. The complementary controls (CK / $\\overline{CK}$) create a two‑phase path, allowing precise control over which portion of the loop is active—making it suitable for delay measurement, testable ring oscillators, or phase‑segmented clock distribution.",
        "format": "markdown",
        "sha256": "b4fe63354ae56a4f5bcb31d80f05be24ce7838362e158146c080aedb4ec2b6fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a segmented ring or test path and never gives its essential function: a dynamic-latch divide-by-two.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 15173,
        "total_tokens": 17173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 15173,
        "total_tokens": 17173,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the diagram, here is a systematic analysis of the arrangement:\n\n## 1. Component Identification\n- **Three inverting stages** (triangle symbols with output circles, i.e., NOT gates/buffers with inversion). The first is explicitly labeled **Inv₁**; the second and third are unlabeled.\n- **Two series switches** inserted along the horizontal signal path:\n  - Switch controlled by **CK** (placed between the feedback node and the input of Inv₁).\n  - Switch controlled by **$\\overline{CK}$** (placed between the output of Inv₁ and the input of the second inverter).\n- **Bottom feedback wire**: The output of the third inverter loops back to the leftmost node, creating a closed geometric loop.\n\n## 2. Topology / Connection Structure\nThe signal flow is arranged as a **breakable ring/delay chain**:\n\n```\nFeedback node (from Inv₃) → [Switch CK] → Inv₁ → [Switch $\\overline{CK}$] → Inv₂ → Inv₃ → (feedback loop back)\n```\n\n- The inverters are **cascaded in series**.\n- The **feedback line closes the loop**, so if both switches were simultaneously closed, the three inverters would form a **ring oscillator** (3 stages = odd number of inversions, satisfying the oscillation condition).\n- The two switches act as **series break points** (like transmission gates or controllable contacts) inside this loop.\n\n## 3. Control & Operating Modes\nBecause the two switches are driven by **complementary clock phases** ($CK$ and $\\overline{CK}$), they are never both open or both closed at the same time under normal clocking:\n- **When $CK = 1$ ($\\overline{CK}=0$)**: The left switch closes, connecting the feedback to Inv₁’s input, but the right switch opens—so Inv₁ is isolated from Inv₂ and Inv₃.\n- **When $CK = 0$ ($\\overline{CK}=1$)**: The right switch closes, so Inv₁ drives Inv₂ → Inv₃, but the left switch opens—so Inv₁ is isolated from the feedback loop.\n\nThus, the **loop is always broken at exactly one point** during steady-state clocking.\n\n## 4. Functional Interpretation\nThis is a **switchable / testable ring-oscillator or delay-test structure**:\n- **Potential Ring Oscillator**: With both switches momentarily closed (e.g., during a dedicated test mode), the 3-inverter loop becomes a continuous ring oscillator whose frequency is determined by the total propagation delay ($3 \\times t_{inv}$).\n- **Delay Measurement / BIST**: Because Inv₁ is explicitly labeled, it is likely the **Device Under Test (DUT)** or the stage whose delay is being characterized. By toggling $CK/\\overline{CK}$, the path can be reconfigured to measure:\n  - Delay of Inv₁ alone (via the feedback connection), or\n  - Delay of the combined chain Inv₁→Inv₂→Inv₃.\n- **Clock/Path Testing**: The complementary control allows the structure to be **scanned, initialized, or started/stopped**—useful for on-chip process monitoring, delay-fault testing (BIST), or clock-tree characterization.\n\n## Summary\nThe figure shows a **3-stage inverter chain with feedback and two complementary-controlled series switches**. It is structurally a **reconfigurable ring oscillator/delay line** where $CK$ and $\\overline{CK}$ selectively break the feedback loop at different points, enabling controlled delay measurement, oscillation testing, or scan-based BIST of the inverter delays (particularly Inv₁).",
        "format": "markdown",
        "sha256": "4c1866d719f9f724d9509fbee1dae73dfc984beac39550c6e52bba3f0a5e7d85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the dynamic-latch divide-by-two as a reconfigurable ring oscillator and never gives the circuit’s intended divide-by-two function.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 11000,
        "total_tokens": 13000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 11000,
        "total_tokens": 13000,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the schematic, the arrangement is a **feedback loop of inverting stages with clock-gated switches**. Here is a step-by-step analysis:\n\n### 1. Component & Topology Identification\n- **Three inverters** in cascade: the first is explicitly labeled **Inv₁**; the other two are identical triangle buffers with output circles (inverting stages).\n- **Two series switches** inserted along the signal path:\n  - **Switch 1** (left): placed before Inv₁, labeled **CK**.\n  - **Switch 2** (middle): placed between Inv₁ and the second inverter, labeled **CK̄** (complementary clock).\n- **Feedback path**: The output of the rightmost inverter connects via the bottom horizontal line back to the input side of Switch 1, forming a **closed loop**.\n\n### 2. Signal Flow\nIf we trace the loop:\n$$\\text{Switch 1 (CK)} \\rightarrow \\text{Inv}_1 \\rightarrow \\text{Switch 2 (}\\overline{CK}\\text{)} \\rightarrow \\text{Inv}_2 \\rightarrow \\text{Inv}_3 \\rightarrow \\text{(feedback)} \\rightarrow \\text{Switch 1}$$\n\nThe switches are **asymmetrically placed**: Inv₁ is isolated between two clock-controlled switches, while Inv₂ and Inv₃ are permanently cascaded with no switches between them.\n\n### 3. Key Functional Properties\n\n| Feature | Implication |\n|---|---|\n| **Odd number of inversions (3)** | Satisfies the oscillation condition for a **ring oscillator**: the loop has net inversion (180° × 3 = 540° ≡ 180°) plus propagation delay; when the loop is closed it can self-oscillate. |\n| **Complementary control (CK / CK̄)** | The two switches are never both open/closed in the same phase (assuming same polarity). This means the loop can be **intentionally broken** at all times, preventing free-running oscillation, or used for **phased signal propagation** (e.g., load into Inv₁ during CK=1, propagate through Inv₂/Inv₃ during CK̄=1). |\n| **Feedback closure** | The bottom line turns the chain from a simple delay line into a **recirculating loop** (ring topology). |\n\n### 4. Most Likely Interpretations\n\n**A. Gated / Clock-Controlled Ring Oscillator**\nIf both switches are closed simultaneously (e.g., via enable logic or if they represent transmission gates with appropriate control), the 3-stage loop acts as a **ring oscillator** with period roughly:\n$$T \\approx 2N \\cdot t_{pd} = 6t_{pd}$$\nwhere $t_{pd}$ is the inverter delay. The CK/CK̄ labeling suggests the oscillator can be **enabled/disabled** or **synchronized** to an external clock.\n\n**B. Dynamic Delay Line / Pipeline Stage**\nBecause the switches are complementary, the loop is usually broken. The structure then behaves as a **clocked pipeline**:\n- During **CK = 1**: The feedback node is connected to Inv₁ (sampling/loading phase).\n- During **CK̄ = 1**: The stored value propagates from Inv₁ through Inv₂ and Inv₃ back to the feedback line.\n\n**C. DLL / PLL Delay Cell or PVT Monitor**\nIn VLSI design, such 3-stage inverter loops are common as:\n- **Voltage-Controlled Oscillator (VCO)** cores inside PLLs.\n- **Process-Voltage-Temperature (PVT) sensors** (oscillation frequency is measured to calibrate delay).\n- **Delay-locked loop (DLL)** delay lines with gated feedback for phase alignment.\n\n### 5. Summary\nThe figure depicts a **3-stage inverter ring with complementary clock-controlled switches (CK / CK̄)** inserted asymmetrically in the loop. Its core characteristics are:\n- **Ring topology** with odd-stage inversion (enabling oscillation if switches close).\n- **Clock-gated paths** that allow the loop to be opened, controlled, or operated as a two-phase pipeline.\n- **Application context**: controllable ring oscillator, gated clock generator, or precision delay element.\n\nIf you need a deeper analysis of a specific aspect (e.g., oscillation frequency calculation, transmission-gate modeling, or DLL phase alignment), let me know!",
        "format": "markdown",
        "sha256": "cf39f9a0d1d5b5ce85dd9ca5ed57a11b81ae276c0f5cb4a4425172825aed2f9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the dynamic-latch divide-by-two as a gated ring oscillator and never gives the half-frequency output. Its discussion of clocked switches and feedback does not capture the intended function.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 13238,
        "total_tokens": 15238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2000,
        "output_tokens": 13238,
        "total_tokens": 15238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this clock-gated delay-line / ring-oscillator structure, the **red inverter (Inv₁)** is an extra inversion stage inserted into the feedback path (its input is tied to the loop node and its output drives an intermediate node in the chain). Its effect on performance is primarily through **delay and loop dynamics**:\n\n### 1. It changes the total loop delay / time step\nEach inverter contributes a propagation delay ($t_{pd}$ or $t_{inv}$). By adding Inv₁, the signal path gains **one additional inverter delay** compared with a simple 3-stage chain. In a delay-line TDC or DLL this directly tunes:\n- The **time resolution** (finer or coarser step size)\n- The **oscillation frequency** if the loop is used as a ring oscillator ($f \\approx 1/(2N t_{inv})$)\n\n### 2. It provides a continuous bypass / alternative path\nThe black inverters are gated by complementary switches ($CK$ / $\\overline{CK}$), meaning they are active only during specific clock phases. Inv₁ is hard-wired to the feedback node, so it can **maintain signal continuity** when the clocked switches are open, reducing dead time or allowing the loop to keep propagating between phases.\n\n### 3. It affects linearity (DNL / INL) through load mismatch\nInv₁ drives a node that also connects to the clock-controlled switches and the next inverter stage. Because its **load capacitance and fan-out differ** from the uniformly loaded black inverters, it can introduce **stage-to-stage mismatch**. If Inv₁ is not carefully sized/matched to the other stages, it can degrade the delay-line linearity. Conversely, if it is intentionally designed as a **load-matching dummy** or calibration stage, it can be used to fine-tune individual stage delays and improve linearity.\n\n### 4. Power / Area cost\nAs with any added gate, Inv₁ consumes additional **dynamic and leakage power** and uses silicon area.\n\n---\n\n**In short:** The red inverter is a **delay-tuning / calibration element**. It modifies the total loop delay by $t_{inv}$, which lets the designer adjust resolution or frequency, but because it sees a different load/network than the clock-gated black stages, it can also be a source of nonlinearity unless matched properly. In many TDC/DLL designs, such an inverter is inserted specifically to provide **fine delay adjustment** (e.g., for Vernier or interpolation architectures) at the cost of slightly increased power and layout complexity.",
        "format": "markdown",
        "sha256": "111c1dc209d4ccc26e58777f21f9cdb83aeb2a7f4fdeff8fc40af31a6bdb4077"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a delay-line/TDC and treats the red inverter as a delay-tuning stage. It only vaguely recognizes an alternate path, but misses that the inverter bypasses part of the first latch to improve speed and that its unclocked path raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 14176,
        "total_tokens": 15921,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 14176,
        "total_tokens": 15921,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the schematic, the **red inverter (Inv₁)** is inserted to generate the complementary clock **$\\overline{CK}$** directly from the feedback/input node **CK**. Its effect on performance is primarily **negative** because it introduces a **delay mismatch** that the DLL (delay-locked loop) or clock-distribution feedback cannot compensate:\n\n| Effect | Reason |\n|--------|--------|\n| **Phase / Duty-Cycle Error** | Inv₁’s propagation delay is **not locked** by the black inverter-chain feedback path. Consequently, $\\overline{CK}$ is shifted by an arbitrary, PVT-dependent amount ($t_{d,\\text{Inv}_1}$) rather than being precisely aligned to the half-period ($T/2$) point of CK. This distorts the 50% duty cycle and creates static phase offset between CK and $\\overline{CK}$. |\n| **Degraded Timing Margin** | Because $\\overline{CK}$ arrives earlier/later than intended, setup/hold windows for edge-triggered circuits shrink, reducing noise immunity and maximum operating frequency. |\n| **Extra Power & Jitter** | Inv₁ adds a switching load and consumes dynamic/static power independently of the controlled delay line. It also injects supply/ground noise that can couple into the clock path, increasing jitter. |\n| **Breaks Delay Matching** | The black chain is designed so that each stage delay is tracked by the loop. Bypassing that chain with Inv₁ means $\\overline{CK}$ is derived from an **unmatched** delay, so any variation in Inv₁’s delay (temperature, voltage, process) directly translates to clock skew. |\n\n### Key Takeaway\nThe figure highlights Inv₁ as a **problematic “shortcut”**: if $\\overline{CK}$ is produced by Inv₁ instead of being tapped from a **matched point inside the DLL delay line** (the black path), the phase relationship between CK and $\\overline{CK}$ is no longer controlled by the feedback loop. To preserve performance, $\\overline{CK}$ should be generated by taking the output of an appropriate stage **within** the locked delay chain so that its delay is tracked and compensated, avoiding the phase error and power overhead introduced by the standalone red inverter.",
        "format": "markdown",
        "sha256": "9018d3631ae040d6972009d5f3c659b33f5312542bdfb02bf02133e21040c3aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a DLL/clock-distribution problem and misses the red inverter’s feedforward path around the first latch. It omits the speed benefit and the key low-frequency drawback, instead attributing unrelated phase and duty-cycle errors to it.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 15043,
        "total_tokens": 16788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 15043,
        "total_tokens": 16788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15789,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at the diagram, the highlighted **Inv₁** is an inverter inserted into the clock distribution path that takes the original clock **CK** and feeds a complementary branch labeled **$\\overline{CK}$** (the node between the first and second black inverters/buffers).\n\nIts effect on performance is primarily through **clock skew and delay mismatch**:\n\n| Effect | Mechanism | Performance Impact |\n|--------|-----------|-------------------|\n| **Added inverter delay ($t_{inv}$)** | The red inverter introduces a gate delay that is not present on the direct **CK** path. | The **$\\overline{CK}$** signal arrives later than **CK** by $\\approx t_{inv}$. |\n| **Clock skew** | The downstream chain now distributes a phase-shifted, delayed version of the clock. | Reduces setup/hold margins between flip-flops clocked by **CK** vs. **$\\overline{CK}$**, which limits the maximum achievable clock frequency and can cause timing violations. |\n| **Phase inversion** | It explicitly generates **$\\overline{CK}$** rather than passing **CK** straight through. | If used to supply negative-edge triggered flip-flops, the edge alignment is offset by both inversion and delay. |\n| **Extra power** | It switches every clock cycle, adding dynamic capacitance to the clock tree. | Increases clock-network power consumption. |\n\n### Key Takeaway\nBecause **Inv₁** is not balanced by a matching “dummy” delay element on the **CK** branch, it creates **uncompensated clock skew** between the two clock domains. In high-performance VLSI, even a single inverter delay ($\\sim$20–50 ps in modern nodes) can be significant relative to the clock period, so this insertion **degrades timing performance** unless it is deliberately part of a balanced clock-inversion strategy (e.g., where the whole tree is optimized to distribute **$\\overline{CK}$** and delays are matched globally).\n\nIn short: **Inv₁** converts **CK** → **$\\overline{CK}$** but at the cost of adding $t_{inv}$ of skew and power, which generally hurts maximum operating frequency and timing reliability unless carefully compensated elsewhere in the tree.",
        "format": "markdown",
        "sha256": "1c1ba34b1f89fd0ac31becf9fee6161eee811a44ff0b3fde0a0ed78e00e5450b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as part of the clock-distribution path. It misses the feedforward path that bypasses part of the first latch, its speed benefit, and the low-frequency drawback.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 10476,
        "total_tokens": 12221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1745,
        "output_tokens": 10476,
        "total_tokens": 12221,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11257,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** Yes, the explanation is essentially correct. The red inverter is indeed a **keeper** (a weak feedback inverter). Together with **Inv₁** it creates a cross‑coupled static latch so that the internal node is held by active feedback rather than by stored charge, which eliminates the leakage‑induced minimum‑clock‑frequency requirement.\n\n---\n\n### Why the answer is right\n\n| Without the red inverter | With the red inverter (keeper) |\n|---|---|\n| When the **CK** switch opens, the node at the input of Inv₁ is floating; its value is held only as charge on a parasitic capacitance. Subthreshold leakage (and gate leakage) slowly corrupts that charge. To avoid losing the bit, the clock must switch fast enough to refresh the node: **f ≥ fₘᵢₙ**. | The red inverter senses the **output** of Inv₁ and feeds back to the **floating input** node of Inv₁. This closes a positive‑feedback loop (Inv₁ ↔ red inverter) — essentially a small SRAM cell / cross‑coupled latch. Once a 0 or 1 is written, the loop holds it actively. Leakage is counteracted continuously, so the clock can stop or run arbitrarily slowly. |\n\nSo the statement\n\n> “The red inverter acts as a keeper, forming a cross‑coupled latch with Inv₁. This removes the minimum clock frequency requirement due to leakage.”\n\nis **functionally correct**.\n\n---\n\n### The actual role of the red inverter\n\n1. **It is a weak feedback inverter (keeper / “half‑latch”).**  \n   It is intentionally sized much smaller/weaker than Inv₁ (often indicated by thinner lines or a different color, as here with red). Its job is **not** to drive a heavy load, but to provide a gentle “restoring” current.\n\n2. **It closes the static loop around Inv₁.**  \n   - **Inv₁:** floating node (let’s call it **N₁**) → output **N₂** (the node shared with the $\\overline{CK}$ switch).  \n   - **Red inverter:** input = **N₂**, output = **N₁**.\n\n   When the CK switch is **open**, N₁ is no longer driven by the external feedback path; instead, the red inverter keeps N₁ at the complementary value of N₂. Because N₂ = ¬N₁ (by Inv₁), the loop is bistable and holds the state robustly.\n\n3. **It must be overridable.**  \n   Because the keeper is weak, when the **CK** switch closes (during the transparent/write phase), the incoming data signal can overpower the feedback and flip the latch to a new value.\n\n4. **It converts a dynamic latch into a static (leakage‑tolerant) latch.**  \n   Without it, the stage is a *dynamic* latch: fast, low power, but requires a minimum clock rate. With it, the stage is *static*: it retains state at DC, removing the **fₘᵢₙ** constraint entirely.\n\n---\n\n### One small clarification on the drawing\n\nGeometrically the red inverter is placed so that:\n- its **input** taps the **output node of Inv₁** (the node between Inv₁ and the $\\overline{CK}$ switch);\n- its **output** drives the **internal floating node** at Inv₁’s input (between the **CK** switch and Inv₁).\n\nThus it is indeed **cross‑coupled with Inv₁**, not merely in parallel with it, and it does **not** take the clock CK as its data input (the vertical red line connects to Inv₁’s input node, not to a separate clock rail).\n\n---\n\n### Bottom line\n\n**Agree:** The red inverter is a **keeper / weak feedback inverter**. By forming a cross‑coupled pair with Inv₁, it turns the dynamic storage node into a **static bistable latch**, which is exactly why the circuit no longer suffers from leakage‑induced loss and therefore has **no minimum clock frequency**.\n\n**Actual role:** **Leakage compensation / staticizer** — it maintains the logic state via positive feedback when the clock switch is open, while remaining weak enough to be overpowered during write operations.",
        "format": "markdown",
        "sha256": "69e02541c664c3bad968e59d7ae4d585d962612b1e75c8d05e59af258ee3d74d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the red inverter’s connections and repeats the rejected keeper interpretation. It misses the actual feedforward path that bypasses part of the latch, and gives the opposite low-frequency consequence: that path can corrupt operation at low clock rates and raise the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 23725,
        "total_tokens": 25515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 23725,
        "total_tokens": 25515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Short answer: **Yes, the answer is essentially correct**, but it helps to be precise about *which* node is being held and how the keeper is sized.\n\n### What the red inverter really is\nThe red inverter is a **leakage keeper (staticizer / weak feedback inverter)**. It is deliberately drawn weak (small transistor sizes) compared with the main inverter `Inv1`. Its connections form a **cross-coupled (regenerative) latch** with `Inv1`:\n\n* When the left switch (controlled by `CK`) is **open**, the input node of `Inv1` is floating (a dynamic node). Without help, subthreshold and gate leakage would slowly corrupt that stored charge.\n* The red inverter feeds the **output of `Inv1`** back to its **input node**. Because the two inverters are cross-coupled, they create a bistable static cell that “locks” the logic level: if the node is high, the keeper pulls it up; if low, it pulls it low.\n\nBecause the keeper is **weak**, when the `CK` switch closes the external signal (from the feedback path through the other stages) can easily overpower it and change the state. When the switch opens, the keeper takes over and holds the value.\n\n### Why this removes the minimum-frequency constraint\nIn a purely dynamic design (e.g., a classic C²MOS or TSPC divider/flip-flop), the only thing preserving the state is the charge on a floating node. That charge leaks away, so the clock must toggle often enough to “refresh” the data—hence a **minimum clock frequency** is required.\n\nBy adding this cross-coupled weak inverter, the storage node becomes **static** during the phase when the switch is open. Leakage is continuously counteracted by the regenerative feedback, so the circuit works correctly even down to **DC** (zero frequency).\n\n### Small caveat / design point\nThe answer is right about the role, but it is important that the red inverter is **much weaker** than `Inv1`. If it were as strong as `Inv1`, it would fight the external signal when the `CK` transmission switch closes, causing contention, slowdown, and extra power consumption. The figure highlights it in red precisely because it is this special “weak keeper” addition.\n\n**In summary:**  \n- **Agree?** Yes.  \n- **Actual role:** A **weak keeper/staticizer** cross-coupled with `Inv1` that holds the floating dynamic node against leakage, converting the latch from dynamic to static and eliminating the minimum-clock-frequency requirement.",
        "format": "markdown",
        "sha256": "3999403faf21b6bd4bd85081f8583f5feee6f39361171da3087667c5cd680a16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer reverses the key connection: the red inverter is not cross-coupled to Inv1 or a keeper. It is an unclocked feedforward branch that bypasses part of the latch path, helping at high speeds but potentially corrupting operation at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 25879,
        "total_tokens": 27669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 25879,
        "total_tokens": 27669,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** Yes, I agree with the conclusion — the red inverter is indeed a **keeper / staticizer** — but the explanation can be sharpened: its actual role is to provide **regenerative feedback to the floating master-node** (the input of `Inv1`) so that the local storage becomes **static** rather than dynamic. This eliminates the leakage-induced drift that would otherwise force a minimum clock frequency.\n\n---\n\n### Detailed breakdown\n\nLooking at the topology:\n\n* The two switches are controlled by complementary clocks (`CK` / `CK̅`).  \n* When `CK` is high, the left switch closes and `Inv1` is driven by the global feedback node (`node 0`).  \n* When `CK` falls (and `CK̅` rises), the left switch **opens**. At that instant the input node of `Inv1` (`node 1`) becomes **floating** (it is isolated from `node 0`). Without any assistance, `node 1` would leak away due to subthreshold currents through the transmission gate and through `Inv1`’s own input transistors.\n\nThe red inverter is connected **across `Inv1`** (input of red = output of `Inv1`; output of red = input of `Inv1`), forming a **cross-coupled (bistable) pair** — i.e. a **half-latch / staticizer**:\n\n| Phase | What happens |\n|-------|--------------|\n| `CK = 1` (left switch closed) | `node 1` is forced to the value coming from `node 0`. The feedback from the red inverter is **overridden** (the keeper is sized weak). `Inv1` drives `node 2`. |\n| `CK = 0` (left switch open) | `node 1` is isolated. The cross-coupled loop (`Inv1` + red inverter) holds `node 1` and `node 2` in a **regenerative, static state**. Leakage cannot corrupt the stored bit because the two inverters continuously “refresh” each other. |\n\nThus the red inverter does exactly what a **keeper/staticizer** is supposed to do:\n\n1. **It turns a dynamic node into a static node.**  \n2. **It removes the minimum-clock-frequency constraint.** In a purely dynamic design, if the clock stops or runs too slowly, the isolated node discharges and the state is lost. With the cross-coupled latch, the value is held indefinitely (DC-stable).\n\n---\n\n### A small but important clarification\n\nThe answer is conceptually right, but technically the red inverter is usually **weak** relative to `Inv1` (and relative to the input driver through the transmission gate). If it were as strong as `Inv1`, it would cause **contention** when the left switch closes: the external driver and the red inverter would fight each other, increasing power and delay. So in practice:\n\n* **Conceptual role:** Keeper / staticizer forming a cross-coupled latch with `Inv1`.  \n* **Physical implementation:** A **weak feedback inverter** that is strong enough to hold the floating node against leakage, but weak enough to be overridden by the input signal when the transmission gate is on.\n\n---\n\n### Bottom line\n\n**Do I agree?** Yes — the red inverter is a **keeper (staticizer)** that cross-couples with `Inv1`. Its actual job is to **regeneratively hold the floating input node of `Inv1`** when the clocked switch is open, converting dynamic storage into static storage and thereby removing the leakage-driven minimum-clock-frequency requirement.",
        "format": "markdown",
        "sha256": "569f4b5c6d1962e4f9e1aa855062b010c7b642b75b57d669d984ee7907f9a586"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a cross-coupled keeper. It is actually an unclocked feedforward branch that bypasses part of the latch path; it can help at high speed but can overpower the latch at low clock rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 20907,
        "total_tokens": 22697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 20907,
        "total_tokens": 22697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21574,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic is a **wideband resistive‑feedback LNA** (often called a “feedback LNA” or “CMOS‑inverter LNA”).  \nThe core amplifier is a CMOS inverter: **M₁** (NMOS, source grounded) and **M₂** (PMOS, source to VDD) share the same gate node (the input node after C₁) and have common drains at the output node **B**. The feedback resistor **R_F** connects the output node B back to the input node, and **R_in** is the resistance looking into that node.\n\n---\n\n### 1.  Input‑resistance constraint\n\nFor the inverter core the open‑circuit small‑signal gain is\n\n\\[\nA_0 \\;=\\; (g_{m1}+g_{m2})\\,R_{\\rm eq}\n\\qquad\\text{with}\\qquad\nR_{\\rm eq}=r_{o1}\\parallel r_{o2}\n\\]\n\nBecause the gates draw zero current, the only DC/AC path from the input node to ground is through **R_F** to the output. Hence\n\n\\[\n\\boxed{R_{\\rm in} \\;=\\; \\frac{R_F}{1+A_0}}\n\\]\n\nTo satisfy the matching requirement\n\n\\[\nR_{\\rm in}=R_s=50\\;\\Omega\n\\]\n\nthe feedback resistor must be chosen as\n\n\\[\n\\boxed{R_F = 50\\,(1+A_0)\\;\\Omega}\n\\]\n\n---\n\n### 2.  Where does the noise come from?\n\nWith **R_in = 50 Ω**, the dominant noise sources are:\n\n| Source | Physical origin | How it enters |\n|--------|----------------|---------------|\n| **R_F** | Thermal noise, \\(4kTR_F\\) | Connected directly between input and output; its noise current \\(i_{n,F}=\\sqrt{4kT/R_F}\\) is “injected” at the input node. |\n| **M₁, M₂** | Channel thermal noise, \\(i_{n,1}=\\sqrt{4kT\\gamma g_{m1}}\\), \\(i_{n,2}=\\sqrt{4kT\\gamma g_{m2}}\\) | Modeled as current sources at the common drain node B; they are suppressed by the core’s gain only if the output resistance \\(R_{\\rm eq}\\) is non‑zero. |\n\nBecause of the feedback relation above, the **thermal‑noise contribution of R_F** to the overall noise figure (NF) scales essentially as\n\n\\[\n{\\rm NF}_{R_F} \\;\\approx\\; 1+\\frac{R_s}{R_F}\n\\]\n\nand the **transistor contribution** scales roughly as\n\n\\[\n{\\rm NF}_{\\rm trans} \\;\\propto\\; \\frac{\\gamma}{g_m R_s}\\,(1+A_0)^2\n\\;\\;\\;\\Rightarrow\\;\\;\\;\n\\text{for large }A_0:\\;\\; {\\rm NF}_{\\rm trans}\\;\\propto\\;\\frac{1}{g_m}\n\\]\n\n---\n\n### 3.  Optimization strategy (R_in fixed at 50 Ω)\n\nThe two contributions have opposite dependencies on **A₀** and **gₘ**:\n\n* **R_F must grow with A₀.** A larger open‑loop gain lets us use a **larger R_F** while still keeping \\(R_{\\rm in}=50\\;\\Omega\\). Since the noise of R_F is reduced when R_F is large, **maximizing A₀ minimizes the feedback‑resistor noise**.\n* **The transistor noise is minimized by maximizing gₘ**, because the intrinsic device noise current is \\(\\sqrt{g_m}\\) but its effect at the output is suppressed by the high gain \\(A_0=g_mR_{\\rm eq}\\).\n\nTherefore the optimization proceeds in two steps:\n\n1. **Maximize the inverter gain A₀**  \n   Choose transistor dimensions and bias so that\n   \\[\n   A_0=(g_{m1}+g_{m2})R_{\\rm eq}\n   \\]\n   is as large as possible:\n   * **Increase gₘ** → use **wide transistors** (large \\(W/L\\)) at a given drain current.\n   * **Increase R_eq** → use **long channel lengths L** (lower \\(\\lambda\\)) and **moderate/low I_D** (since \\(r_o\\propto 1/I_D\\)).\n\n   In practice one picks the lowest \\(I_D\\) that still gives the required bandwidth / linearity, then scales \\(W\\) to get the needed \\(g_m\\).\n\n2. **Set R_F from the matching constraint**  \n   Once A₀ is maximized, fix\n   \\[\n   \\boxed{R_F = 50\\,(1+A_0)\\;\\Omega}\n   \\]\n   This is the **largest possible R_F** compatible with 50 Ω matching, and therefore gives the **smallest thermal‑noise contribution from R_F**.\n\n---\n\n### 4.  Bottom line\n\n> **To optimize NF under the hard constraint \\(R_{\\rm in}=50\\;\\Omega\\): maximize the open‑loop gain \\(A_0\\) of the CMOS inverter (large \\(g_m\\) via large \\(W/L\\), large \\(R_{\\rm eq}\\) via long \\(L\\) / low \\(I_D\\)). Then choose \\(R_F = 50(1+A_0)\\).**  \n> The large A₀ permits a very large feedback resistor, which suppresses the direct thermal noise of R_F, while the high \\(g_m\\) suppresses the intrinsic transistor noise. This is the standard design rule for resistive‑feedback LNAs (e.g. Razavi, *RF Microelectronics*, §5.3).",
        "format": "markdown",
        "sha256": "2dc87aac63e7255add2827f68816ac00a6c50716fdb44168cc4f386fbb4c5fa3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the inverter feedback LNA and recommends increasing gm while adjusting RF, which is directionally relevant. But its match equation omits the finite-ro term, and it does not explain how finite ro permits gm > 1/Rs and NF below 1 + gamma; its noise-scaling argument is also inconsistent.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 46858,
        "total_tokens": 48563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 46858,
        "total_tokens": 48563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic is the classic **resistive‑feedback (shunt–shunt) common‑source LNA**:  \n- **M₁** is the NMOS gain transistor (source grounded, gate = input node, drain = output node).  \n- **M₂** is a PMOS load / current source (source to V_DD, drain to the output node; its gate is biased at a fixed DC voltage, omitted for clarity).  \n- **R_F** provides DC feedback (self‑biasing the inverter‑like stage so that V_GS ≈ V_DS) and, together with M₁, sets the 50 Ω input resistance.  \n- **C₁** is only a DC block; for AC (noise) analysis it is a short.\n\n---\n\n### 1.  Input‑resistance constraint\n\nFor small‑signal, with M₂ acting as a high‑impedance load (output resistance r_o2 ≫ 1/g_m1), the resistance seen at the input node is\n\n\\[\nR_{\\text{in}} \\;\\approx\\; \\frac{1}{g_{m1}} \\;=\\; \\frac{1}{G_m}\n\\]\n\n(More exactly: \\(R_{\\text{in}}=\\frac{1+G_oR_F}{G_o+g_{m1}}\\) with \\(G_o=1/r_{o1}+1/r_{o2}\\); for a current‑source load \\(G_o\\approx 0\\) so the approximation is excellent.)\n\n**Therefore, to keep \\(R_{\\text{in}} = 50\\;\\Omega\\) we must fix the NMOS transconductance:**\n\n\\[\n\\boxed{g_{m1} \\;=\\; \\frac{1}{R_s} \\;\\approx\\; 20\\ \\text{mS}}\n\\]\n\nThis is done by sizing M₁ (W/L) and choosing its drain current \\(I_{D1}\\) so that \\(g_{m1}=\\sqrt{2\\mu_n C_{ox}(W/L)I_{D1}}\\approx 20\\) mS.\n\n> **Important consequence:** Because \\(R_{\\text{in}}\\approx 1/g_{m1}\\), the feedback resistor **R_F does not appear in the matching condition** (as long as the load is high‑Z). Once \\(g_{m1}\\) is locked to 20 mS, **R_F becomes a “free” knob for noise optimization**.\n\n---\n\n### 2.  Noise‑figure expression\n\nThe dominant uncorrelated noise sources are:\n\n| Source | PSD (current or voltage) |\n|--------|--------------------------|\n| Source resistance \\(R_s=50\\;\\Omega\\) | \\(4kTR_s\\) |\n| Feedback resistor \\(R_F\\) | \\(4kTR_F\\) (modeled as current \\(4kT/R_F\\) in parallel) |\n| M₁ (NMOS) | \\(4kT\\gamma_1 g_{m1}\\) |\n| M₂ (PMOS load) | \\(4kT\\gamma_2 g_{m2}\\) (small because M₂ is a current source) |\n\nUsing superposition (with \\(G_m=g_{m1}\\) and \\(A_v\\approx 1-g_{m1}R_F\\)), the noise factor is\n\n\\[\nF \\;\\approx\\; 1 \\;+\\; \\underbrace{\\frac{R_s}{R_F}\\frac{(1+g_{m1}R_s)^2}{(1-g_{m1}R_F)^2}}_{\\text{thermal noise of }R_F}\n\\;+\\; \\underbrace{\\frac{(R_s+R_F)^2}{R_s(1-g_{m1}R_F)^2}\\,\\gamma_1 g_{m1}}_{\\text{M}_1\\text{ channel noise}}\n\\]\n\nBecause \\(g_{m1}R_s=1\\), this simplifies to\n\n\\[\nF \\;\\approx\\; 1+\\gamma_1 \\;+\\; \\frac{4R_s}{R_F(1-g_{m1}R_F)^2} \\;+\\; \\dots\n\\]\n\nThe key observation is the **(1 – g_m1R_F)² denominator**:\n\n- If \\(R_F \\approx 1/g_{m1}=50\\;\\Omega\\), the denominator vanishes and **F explodes** (gain collapses to zero).\n- As **\\(R_F \\to \\infty\\)** (or at least \\(R_F \\gg 1/g_{m1}\\)), the term from \\(R_F\\) vanishes and\n\n\\[\n\\boxed{F_{\\min} \\;\\approx\\; 1+\\gamma_1}\n\\]\n\nFor long‑channel devices (\\(\\gamma_1\\approx 2/3\\)) this gives **F ≈ 1.67 (2.2 dB)**, which is the best this topology can do—essentially the transistor’s intrinsic minimum.\n\n---\n\n### 3.  Optimization procedure (with \\(R_{\\text{in}}=50\\;\\Omega\\) fixed)\n\n| Step | Action | Reason |\n|------|--------|--------|\n| **(a)** | **Fix \\(g_{m1}=20\\) mS** by sizing M₁ and choosing \\(I_{D1}\\). | Satisfies \\(R_{\\text{in}}=R_s\\). |\n| **(b)** | **Make \\(R_F\\) as large as practically possible** (kΩ to tens of kΩ). | Its thermal noise current (\\(\\propto 1/R_F\\)) drops, while signal gain \\(|A_v|\\approx g_{m1}R_F\\) grows; the \\(R_F\\) contribution to NF therefore shrinks. |\n| **(c)** | **Keep M₂’s noise small**: use a low‑\\(g_{m2}\\) current source (or omit active load and use a high‑Z cascode / ideal current source) so \\(\\gamma_2 g_{m2}\\ll \\gamma_1 g_{m1}\\). | The PMOS load contributes only through its output resistance; its channel noise is suppressed if it carries small current. |\n| **(d)** | **Minimize \\(\\gamma_1\\)**: operate M₁ in **strong inversion** with a **long channel** (large L, moderate \\(V_{ov}\\)). This lowers \\(\\gamma\\) toward 2/3 (rather than >1 for short‑channel). | Directly lowers the fundamental floor \\(1+\\gamma_1\\). |\n| **(e)** | **DC bias check**: Because the gate of M₁ draws no DC current, the feedback loop forces \\(V_{G1}=V_{D1}\\) regardless of \\(R_F\\). A very large \\(R_F\\) still self‑biases the stage correctly; the only limit is the RC time constant at the input (\\(R_F||R_s\\) with \\(C_{gs}\\)) and stability (ensure the loop is not so high‑gain that it oscillates). | Allows large \\(R_F\\) without losing DC operating point. |\n\n---\n\n### 4.  Summary of the optimum\n\n> **To keep \\(R_{\\text{in}}=50\\;\\Omega\\): set \\(g_{m1}=20\\) mS.**  \n> **To minimize NF: maximize \\(R_F\\) (subject to stability/bandwidth) and minimize M₁’s noise factor \\(\\gamma_1\\) (strong inversion, long L).**\n\nIn practice this means:\n- **M₁**: \\(W/L\\) chosen for \\(g_m\\approx 20\\) mS at the desired current (e.g. \\(I_D\\approx 2\\!-\\!4\\) mA for a 0.18 µm process).\n- **R_F**: 2 kΩ – 10 kΩ (much larger than 50 Ω; the larger, the lower the NF).\n- **M₂**: Small current, high output resistance (low \\(g_{m2}\\)) so it does not add noise.\n\nThe result is a wideband 50 Ω LNA whose noise figure approaches the transistor minimum (\\(\\approx 2\\) dB) while the input is perfectly matched by the transconductance constraint, not by the feedback resistor.",
        "format": "markdown",
        "sha256": "8f2b7d593475464e6582671e9ace930e679ee5583372fd204834386a33f71abf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the shunt-feedback LNA and even states the finite-output-resistance input-resistance relation, but then discards that effect, fixes gm at 1/Rs, and concludes the best NF is 1+gamma as RF grows. This misses the central optimization: raise gm above 1/Rs and adjust RF to preserve the 50-ohm match, allowing NF below 1+gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 44221,
        "total_tokens": 45926,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 44221,
        "total_tokens": 45926,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **resistive‑feedback (shunt‑feedback) amplifier**—specifically a **CMOS inverter** ($M_1$ NMOS + $M_2$ PMOS) with a feedback resistor $R_F$ that provides both DC bias and input termination.\n\n---\n\n### 1.  Input resistance\n\nBecause the gates draw no current, the only AC path from the input node ($N_1$) to the output node ($N_2$) is through $R_F$.  If the small‑signal voltage gain of the inverter is\n\n$$A_v \\;=\\; \\frac{V_{N_2}}{V_{N_1}} \\;\\approx\\; -(g_{m1}+g_{m2})R_{out}$$\n\nwhere $R_{out}=r_{o1}||r_{o2}$ is the inverter’s output resistance, then the resistance seen at $N_1$ is\n\n$$\\boxed{R_{in} \\;=\\; \\frac{R_F}{1-A_v}\n      \\;=\\; \\frac{R_{out}+R_F}{1+(g_{m1}+g_{m2})R_{out}}}$$\n\nTo keep $R_{in}=50\\;\\Omega$ we therefore have **one constraint linking $g_m$ and $R_F$**:\n\n$$R_F \\;=\\; 50\\bigl[1+(g_{m1}+g_{m2})R_{out}\\bigr]-R_{out}$$\n\nIf the devices are sized so that $(g_{m1}+g_{m2})R_{out}\\gg 1$ (the usual wideband LNA case), this simplifies to\n\n$$R_{in}\\approx \\frac{1}{g_{m1}+g_{m2}} \\quad\\Longrightarrow\\quad\ng_{m1}+g_{m2} \\approx \\frac{1}{50\\;\\Omega}=20\\;\\text{mS}.$$\n\n---\n\n### 2.  Noise sources\n\nThe noise figure is set by three uncorrelated sources:\n\n| Source | PSD |\n|--------|-----|\n| $R_F$ | $4kTR_F$ |\n| $M_1$ (NMOS) | $4kT\\gamma g_{m1}$ |\n| $M_2$ (PMOS) | $4kT\\gamma g_{m2}$ |\n\nThe total transistor noise is $4kT\\gamma(g_{m1}+g_{m2})$.\n\nBecause $A_v$ is negative and large, the **signal** at $N_2$ is $\\propto (g_{m1}+g_{m2})R_{out}$, whereas the **noise** of $R_F$ is simply $\\sqrt{4kTR_F}$ and the transistor noise is $\\sqrt{4kT\\gamma(g_{m1}+g_{m2})}R_{out}$.  Referred to the 50‑Ω source, the input‑equivalent noise decreases as $g_m$ grows because the voltage gain grows **faster** than the noise.\n\n---\n\n### 3.  Optimization strategy\n\nTo **minimize NF** under the hard constraint $R_{in}=50\\;\\Omega$:\n\n1. **Maximize $g_{m1}+g_{m2}$**  \n   - Make $W_1/L_1$ and $W_2/L_2$ as large as the area/budget allows.\n   - Raise $I_D$ (which raises $g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}$).\n   - The larger $g_m$, the larger $|A_v|$, and the smaller the input‑referred contribution of both $R_F$ and the transistors.\n\n2. **Scale $R_F$ with $g_m$ to keep the match**  \n   From the constraint above:\n   $$\\boxed{R_F \\approx (g_{m1}+g_{m2})\\,R_{out}\\,(50\\;\\Omega)}$$\n   (plus a small correction $-R_{out}+50$).  \n   In other words, **do not choose $R_F$ independently**; increase it proportionally as you widen the transistors.\n\n3. **What happens to NF?**  \n   As $g_m\\to\\infty$ (with $R_F$ scaled accordingly):\n   $$A_v\\to -\\infty, \\qquad R_{in}\\to 50\\;\\Omega,$$\n   and the noise figure approaches the **common‑gate limit**:\n   $$\\boxed{NF \\;\\to\\; 1+\\gamma}$$\n   (for $\\gamma\\approx 2/3$ this is $\\approx 2.2$ dB; in the ideal case $NF\\to 1$, i.e. 0 dB).\n\n   Any finite $g_m$ gives $NF > 1+\\gamma$ because $R_F$’s thermal noise and the finite gain leave a larger residual noise term.\n\n---\n\n### 4.  Practical design rule\n\n| Step | Action |\n|------|--------|\n| **Bias** | Set $I_D$ high enough so that $g_{m1}+g_{m2} \\gg 20$ mS. |\n| **Sizing** | Increase $W_1$ and $W_2$ (keeping $W_2/L_2$ matched to $W_1/L_1$ for a balanced inverter) until $g_{m1}+g_{m2}$ is maximized within power/area limits. |\n| **Feedback** | Compute $R_{out}=r_{o1}||r_{o2}$ and choose $R_F = 50\\,[1+(g_{m1}+g_{m2})R_{out}]-R_{out}$. |\n| **Check** | Verify DC headroom: $I_D R_F < V_{DD}$; also verify that the $R_F$ parasitic capacitance does not kill the bandwidth. |\n\n---\n\n**Bottom line:**  \nBecause $R_{in}$ is dominated by $1/(g_{m1}+g_{m2})$, you **must** have $g_{m1}+g_{m2}\\approx 20$ mS (minimum). To **optimize NF**, push $g_m$ **as high as possible** and increase $R_F$ proportionally so that the match $R_{in}=50\\;\\Omega$ is preserved. The larger $g_m$ and $R_F$ become, the lower the input‑referred thermal noise of $R_F$, and the closer NF gets to $1+\\gamma$ (approaching 0 dB in the ideal limit).",
        "format": "markdown",
        "sha256": "0bff14454cc9a10423592f43d2b6aad95a50980d31bc06a76636059d8f60ab15"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the finite-output-resistance match relation and correctly recommends increasing gm while adjusting RF to preserve Rin. But it incorrectly claims NF remains above or approaches 1+γ; the key result is that NF can fall below 1+γ as gm increases.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 60113,
        "total_tokens": 61818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 60113,
        "total_tokens": 61818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small‑signal input impedance seen by the test current source \\(I_{\\mathrm{in}}\\) we apply a test voltage \\(v_P\\) at node \\(P\\) and determine the total current that leaves \\(P\\).  \nThe key observations are:\n\n* \\(M_1\\) is an NMOS common‑source device (\\(g_{m1}\\), \\(r_{o1}\\approx\\infty\\)). Its drain is node \\(X\\) and its load is \\(R_{D1}\\) to AC ground (\\(V_{DD}\\)).\n* Node \\(X\\) drives the gate of \\(M_2\\). From the topology (gate of \\(M_2\\) = drain node of \\(M_1\\), common source node fed by the DC current source \\(I_{SS}\\), and \\(M_3\\) biased by \\(V_b\\) acting as a current‑source load at \\(V_{out}\\)), transistor \\(M_2\\) operates as a **source follower** (common‑drain). Hence \\(v_{out}\\approx v_X\\).\n* The ideal DC source \\(I_{SS}\\) is an open circuit for small‑signal analysis; \\(V_{DD}\\) is an AC ground.\n* The only connection from the input node \\(P\\) to the active devices is through the feedback resistor \\(R_F\\) to \\(V_{out}\\); the MOS gate of \\(M_1\\) draws zero DC/signal current.\n\n---\n\n### 1. Open‑loop gain from \\(P\\) to \\(V_{out}\\)\n\nAt node \\(X\\):\n\\[\nv_X = -g_{m1}v_P\\,R_{D1} \\qquad (\\text{assuming }r_{o1}\\gg R_{D1}).\n\\]\n\nBecause \\(M_2\\) is a source follower with load \\(R_{D2}\\parallel r_{o3}\\) (set by \\(M_3\\)),\n\\[\nv_{out} \\approx v_X \\quad \\Longrightarrow \\quad \nA \\equiv \\frac{v_{out}}{v_P} \\approx -g_{m1}R_{D1}.\n\\]\n\nThe minus sign is essential: the first stage inverts, so the overall loop through the shunt feedback resistor \\(R_F\\) is **negative**.\n\n---\n\n### 2. KCL at the input node \\(P\\)\n\nThe currents leaving node \\(P\\) are:\n\n* through the physical resistor \\(R_{\\mathrm{in}}\\): \\(v_P/R_{\\mathrm{in}}\\)\n* through the capacitance \\(C_{\\mathrm{in}}\\): \\(sC_{\\mathrm{in}}v_P\\)\n* through the feedback resistor to \\(v_{out}\\): \\(\\displaystyle \\frac{v_P-v_{out}}{R_F}\n   = \\frac{(1-A)v_P}{R_F}\\)\n\nSince the gate of \\(M_1\\) draws no current,\n\\[\nI_{\\mathrm{in}} = \\frac{v_P}{R_{\\mathrm{in}}}+sC_{\\mathrm{in}}v_P+\\frac{(1-A)v_P}{R_F}.\n\\]\n\n---\n\n### 3. Input impedance \\(Z_{\\mathrm{in}}=v_P/I_{\\mathrm{in}}\\)\n\nSolving for \\(Z_{\\mathrm{in}}\\):\n\\[\n\\boxed{%\nZ_{\\mathrm{in}}(s)=\n\\left[\\frac{1}{R_{\\mathrm{in}}}+sC_{\\mathrm{in}}+\\frac{1-A}{R_F}\\right]^{-1}\n}\n\\]\n\nInsert \\(A\\approx -g_{m1}R_{D1}\\):\n\n\\[\n\\boxed{%\nZ_{\\mathrm{in}}(s)=\n\\left[\\frac{1}{R_{\\mathrm{in}}}+sC_{\\mathrm{in}}+\\frac{1+g_{m1}R_{D1}}{R_F}\\right]^{-1}\n}\n\\]\n\n---\n\n### 4. Low‑frequency (DC) approximation\n\nAt DC (\\(s=0\\)) and when the loop gain \\(g_{m1}R_{D1}\\gg 1\\),\n\n\\[\n\\boxed{%\nZ_{\\mathrm{in}} \\approx \nR_{\\mathrm{in}} \\;\\parallel\\; \\frac{R_F}{1+g_{m1}R_{D1}}\n}\n\\]\n\n**Interpretation:** The feedback resistor \\(R_F\\) is “bootstrapped” by the gain of the common‑source stage \\(M_1\\). The effective resistance looking into the active part of the circuit is \\(R_F/(1+g_{m1}R_{D1})\\), which can be orders of magnitude smaller than \\(R_F\\) itself. The total impedance is that value in parallel with the explicit shunt elements \\(R_{\\mathrm{in}}\\) and \\(C_{\\mathrm{in}}\\).\n\n*If one includes the finite output resistance \\(r_{o1}\\), replace \\(R_{D1}\\) with \\(R_{D1}\\parallel r_{o1}\\) in the expression above; if the source follower gain is not unity, replace \\(A\\) by \\(-g_{m1}(R_{D1}\\parallel r_{o1})\\,\\alpha\\) where \\(\\alpha=g_{m2}R_L/(1+g_{m2}R_L)\\).*",
        "format": "markdown",
        "sha256": "d941f7953bad6efae360363a1319381712711fd1fb935f4d5c1d8ea45bf96f6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that feedback through RF can lower the input impedance, but misidentifies M2 as a source follower and omits the second-stage gain and output resistance RD2. It also adds shunt Rin and Cin not present in the model, so its result does not match the required (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 39686,
        "total_tokens": 40114,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30455,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 39686,
        "total_tokens": 40114,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30455,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer – Small‑signal input impedance**\n\nThe circuit is a **shunt–shunt feedback (trans‑impedance) amplifier**.  \nThe input current source \\(I_{\\rm in}\\) is applied to node **P**; the transistor\n\\(M_{1}\\) draws no DC/small‑signal gate current, so the only DC paths from\n\\(P\\) to ground are\n\n* the explicit resistor \\(R_{\\rm in}\\) and capacitor \\(C_{\\rm in}\\), and  \n* the feedback resistor \\(R_{F}\\) which connects the output node\n\\(V_{\\rm out}\\) back to \\(P\\).\n\nBecause the open‑loop gain from \\(P\\) to \\(V_{\\rm out}\\) is large, the\nfeedback current through \\(R_{F}\\) dominates the impedance seen at the\ninput port.\n\n---\n\n### 1.  Small‑signal model (DC / low‑frequency, \\(C_{\\rm in}\\) open)\n\nReplace the ideal DC current source \\(I_{\\rm SS}\\) by an open,\n\\(V_{DD},V_{b}\\) by AC ground, and use the standard MOSFET small‑signal\nmodel \\(g_{m},r_{o}\\).  For hand analysis we assume\n\\(r_{o1},r_{o2},r_{o3}\\gg R_{D1},R_{D2},R_{F}\\) (the result is easily\ncorrected by replacing \\(R_{D1}\\to R_{D1}{\\parallel}r_{o1}\\) etc.).\n\n| Stage | Transistor | Action |\n|-------|------------|--------|\n| 1st   | \\(M_{1}\\) (NMOS, source gnd, gate = \\(P\\), drain = \\(X\\)) | Common‑source |\n| 2nd   | \\(M_{2}\\) (NMOS, source gnd, gate = \\(X\\), drain = node \\(S\\)) | Common‑source |\n| 3rd   | \\(M_{3}\\) (NMOS cascode, source = \\(S\\), drain = \\(V_{\\rm out}\\), gate = \\(V_{b}\\) AC gnd) | Common‑gate (unity current gain) |\n\n---\n\n### 2.  Open‑loop voltage gain \\(A_{v}=v_{\\rm out}/v_{P}\\)\n\n**Node \\(X\\)** (KCL, \\(R_{D1}\\) to ground):\n\\[\nv_{X}=-g_{m1}R_{D1}\\,v_{P}\\tag{1}\n\\]\n\n**Node \\(S\\)** (current through \\(M_{2}\\) is \\(g_{m2}v_{X}\\); because\n\\(M_{3}\\) is common‑gate its source input resistance is \\(\\approx 1/g_{m3}\\)\nand it passes the current to \\(R_{D2}\\) with gain \\(\\approx 1\\)):\n\\[\ni_{d2}=g_{m2}v_{X}\\;\\;\\Rightarrow\\;\\;\nv_{\\rm out}=-i_{d2}R_{D2}\n           =g_{m1}g_{m2}R_{D1}R_{D2}\\,v_{P}.\n\\]\n\nHence the **open‑loop voltage gain** is\n\\[\n\\boxed{A_{v}=g_{m1}g_{m2}R_{D1}R_{D2}}\\tag{2}\n\\]\n\n*(Note: the cascode transistor \\(M_{3}\\) does **not** change the gain\nmagnitude; it only raises the output resistance of the current source.)*\n\n---\n\n### 3.  KCL at the input node \\(P\\)\n\nThe external test current \\(I_{\\rm in}\\) enters node \\(P\\).  It splits\ninto three branches:\n\n1. through the explicit shunt resistor: \\(v_{P}/R_{\\rm in}\\),\n2. through the capacitor: \\(sC_{\\rm in}v_{P}\\),\n3. through the feedback resistor: \\((v_{P}-v_{\\rm out})/R_{F}\\).\n\nUsing (2), \\(v_{\\rm out}=A_{v}v_{P}\\):\n\\[\nI_{\\rm in}= \\frac{v_{P}}{R_{\\rm in}}+sC_{\\rm in}v_{P}\n            +\\frac{v_{P}-A_{v}v_{P}}{R_{F}}\n          = v_{P}\\!\\left[\n            \\frac{1}{R_{\\rm in}}+sC_{\\rm in}\n            +\\frac{1-A_{v}}{R_{F}}\\right].\n\\]\n\n---\n\n### 4.  Input impedance \\(Z_{\\rm in}=v_{P}/I_{\\rm in}\\)\n\nTherefore the **total input impedance** seen by the current source is\n\n\\[\n\\boxed{\nZ_{\\rm in}(s)=\n\\left[\n\\frac{1}{R_{\\rm in}}+sC_{\\rm in}\n+\\frac{1-g_{m1}g_{m2}R_{D1}R_{D2}}{R_{F}}\n\\right]^{-1}\n}\\tag{3}\n\\]\n\n---\n\n### 5.  Useful special forms\n\n| Case | Expression |\n|------|------------|\n| **DC resistance** (\\(s=0\\), \\(C_{\\rm in}\\) open) | \\(\\displaystyle R_{\\rm in,eq}=\\left[\\frac{1}{R_{\\rm in}}+\\frac{1-A_{v}}{R_{F}}\\right]^{-1}\\) |\n| **No explicit shunt resistor** (\\(R_{\\rm in}\\to\\infty\\)) | \\(\\displaystyle Z_{\\rm in}=\\frac{R_{F}}{1-A_{v}}\\approx -\\frac{R_{F}}{A_{v}}\\quad(A_{v}\\gg 1)\\) |\n| **With finite \\(r_{o}\\)** | Replace \\(R_{D1}\\to R_{D1}{\\parallel}r_{o1}\\) and multiply \\(A_{v}\\) by the cascode factor \\(\\displaystyle \\frac{g_{m3}r_{o3}}{1+g_{m3}r_{o3}}\\approx 1\\). |\n\nBecause \\(A_{v}=g_{m1}g_{m2}R_{D1}R_{D2}\\) is typically **much larger\nthan 1**, the term \\((1-A_{v})/R_{F}\\) is a **negative conductance**.\nThe explicit resistor \\(R_{\\rm in}\\) is therefore required to keep the\ntotal conductance positive and the DC operating point stable:\n\\[\n\\frac{1}{R_{\\rm in}}>\\frac{A_{v}-1}{R_{F}}.\n\\]\n\nIf one is interested only in the impedance of the **active feedback\nnetwork** (i.e. excluding the explicit \\(R_{\\rm in},C_{\\rm in}\\)),\nit is simply\n\\[\nZ_{\\rm act}=\\frac{R_{F}}{1-A_{v}}.\n\\]\n\n---\n\n**Bottom line:** The input impedance of the figure is given by Eq. (3).\nIt is the parallel combination of the physical resistor \\(R_{\\rm in}\\),\nthe capacitor \\(C_{\\rm in}\\), and an effective resistance\n\\(R_{F}/(1-A_{v})\\) created by the two common‑source stages (\\(M_{1},M_{2}\\))\nand the common‑gate cascode (\\(M_{3}\\)) with open‑loop gain\n\\(A_{v}=g_{m1}g_{m2}R_{D1}R_{D2}\\).",
        "format": "markdown",
        "sha256": "eea87b14a849fa239221e70ef32cd3ecd92402cede4a956666efe9071dcbda1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the broad shunt–shunt feedback context, but uses the wrong gain polarity and omits the amplifier’s output resistance. Its negative-conductance result contradicts the required input resistance, (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 48800,
        "total_tokens": 49228,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 48800,
        "total_tokens": 49228,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Solution overview**\n\nThe circuit is a **shunt–feedback (transimpedance) amplifier**:  \nthe photodiode (or current source) is modelled by \\(I_{\\rm in}\\), the diode capacitance\n\\(C_{\\rm in}\\) and the shunt resistance \\(R_{\\rm in}\\).  \nThe core amplifier is a **two–stage** small–signal path:\n\n* **Stage 1:** NMOS common–source transistor \\(M_1\\) with drain load \\(R_{D1}\\).\n* **Stage 2:** NMOS common–drain (source–follower) pair \\(M_2/M_3\\) that buffers the\nvoltage at node \\(X\\) to the output node \\(V_{\\rm out}\\).  \nThe ideal DC current source \\(I_{SS}\\) is open for AC analysis, so \\(M_2\\) and\n\\(M_3\\) share the same floating source node; together they provide the\nnecessary AC current path.\n\nThe feedback resistor \\(R_F\\) closes the loop from \\(V_{\\rm out}\\) back to the\ninput node \\(P\\).  Because the amplifier is **inverting** (\\(A_v<0\\)),\n\\(R_F\\) is “Miller–divided” by the factor \\((1-A_v)\\), which gives a very\nlow input impedance – exactly what is desired for a wideband TIA.\n\nBelow is the step‑by‑step small‑signal derivation (channel‑length modulation\n\\(r_o\\to\\infty\\) is assumed; \\(I_{SS}\\) is open for AC).\n\n---\n\n### 1. Small‑signal model parameters\n\n| Transistor | Transconductance | Type of stage |\n|------------|------------------|---------------|\n| \\(M_1\\)    | \\(g_{m1}\\)       | NMOS common‑source |\n| \\(M_2\\)    | \\(g_{m2}\\)       | NMOS common‑drain (source follower) |\n| \\(M_3\\)    | \\(g_{m3}\\)       | NMOS common‑drain (bias branch) |\n\nAll DC sources (\\(V_{DD}\\), \\(I_{SS}\\), \\(V_b\\)) become AC grounds/open\ncircuits.\n\n---\n\n### 2. First stage – node \\(X\\)\n\n\\(M_1\\) is common‑source with source grounded, so\n\n\\[\nv_{gs1}=v_{\\rm in}\\quad\\Longrightarrow\\quad\ni_{d1}=g_{m1}v_{\\rm in}.\n\\]\n\nThe only small‑signal load at node \\(X\\) is \\(R_{D1}\\) (the gate of \\(M_2\\)\ndraws no current).  Hence\n\n\\[\n\\boxed{v_x = -g_{m1}R_{D1}\\,v_{\\rm in}} .\n\\]\n\n---\n\n### 3. Second stage – node \\(S\\) (sources of \\(M_2,M_3\\))\n\nBecause \\(I_{SS}\\) is ideal, no AC current can leave node \\(S\\).  Applying\nKCL at \\(S\\):\n\n\\[\ng_{m2}(v_s-v_x)+g_{m3}v_s = 0\n\\;\\;\\Longrightarrow\\;\\;\n\\boxed{v_s = \\frac{g_{m2}}{g_{m2}+g_{m3}}\\,v_x } .\n\\]\n\nThe two devices are common‑drain (source followers).  Their combined\ntransconductance seen from node \\(S\\) to \\(V_{\\rm out}\\) is\n\\(g_{m2}+g_{m3}\\).  The load is \\(R_{D2}\\) to ground.  Since in any\npractical design \\(g_mR_D\\gg 1\\), the source follows the gate with\nunity gain:\n\n\\[\nv_o \\approx v_s \\approx v_x .\n\\]\n\nThus the **overall open‑loop voltage gain** is\n\n\\[\nA_v \\equiv \\frac{v_o}{v_{\\rm in}}\n      \\approx (-g_{m1}R_{D1})(+1)\n      = \\boxed{-g_{m1}R_{D1}} .\n\\]\n\n(The minus sign comes from the first CS stage; the second stage is\nnon‑inverting.)\n\n---\n\n### 4. Feedback analysis – impedance of \\(R_F\\)\n\nApply a test voltage \\(v_{\\rm in}\\) at node \\(P\\).  The current through the\nfeedback resistor is\n\n\\[\ni_F = \\frac{v_{\\rm in}-v_o}{R_F}\n    = \\frac{v_{\\rm in}(1-A_v)}{R_F}.\n\\]\n\nTherefore the impedance “looking into’’ the \\(R_F\\) branch is\n\n\\[\nZ_F \\equiv \\frac{v_{\\rm in}}{i_F}\n     = \\frac{R_F}{1-A_v}\n     = \\frac{R_F}{1+g_{m1}R_{D1}} .\n\\]\n\nBecause \\(g_{m1}R_{D1}\\gg 1\\), this resistance is **much smaller** than\n\\(R_F\\) itself; this is the classic “shunt‑feedback” input‑impedance\nreduction.\n\n---\n\n### 5. Total input impedance at node \\(P\\)\n\nAt the input node we have three parallel paths to ground:\n\n* physical resistance \\(R_{in}\\),\n* physical capacitance \\(C_{in}\\)  \\(\\;\\Rightarrow\\; Z_C = 1/(sC_{in})\\),\n* feedback branch \\(Z_F\\).\n\nHence\n\n\\[\n\\boxed{%\nZ_{\\rm in}(s) = R_{in} \\;\\|\\; \\frac{1}{sC_{in}} \\;\\|\\; \\frac{R_F}{1+g_{m1}R_{D1}}\n}\n\\]\n\nor, writing the parallel combination explicitly as a single expression:\n\n\\[\n\\boxed{%\nZ_{\\rm in}(s) = \\left[\n\\frac{1}{R_{in}} + sC_{in} + \\frac{1+g_{m1}R_{D1}}{R_F}\n\\right]^{-1}\n}\n\\]\n\n---\n\n### 6. DC and low‑frequency limits\n\n*If the photodiode shunt resistance is very large* (\\(R_{in}\\to\\infty\\))\nand at DC (\\(s=0\\)):\n\n\\[\n\\boxed{%\nZ_{\\rm in}(0) \\;\\approx\\; \\frac{R_F}{\\,1+g_{m1}R_{D1}\\,}\n}\n\\]\n\n*If the capacitance matters* (e.g. at high frequency), replace\n\\(Z_{\\rm in}\\) by the full expression above; the term\n\\((1+g_{m1}R_{D1})/R_F\\) is the dominant conductance, so the\neffective input resistance is small and the input pole\n\\(\\omega_{\\rm in} = 1/[C_{in}Z_{\\rm in}(0)]\\) is pushed to a very\nhigh frequency – exactly the desired behaviour of a wideband\ntransimpedance amplifier.\n\n---\n\n**Summary**\n\nThe input impedance of the circuit is the parallel combination of\n\\(R_{in}\\), \\(C_{in}\\), and the feedback resistor scaled by the loop\ngain \\((1+g_{m1}R_{D1})\\):\n\n\\[\n\\boxed{Z_{\\rm in} = \\left[ \\frac{1}{R_{in}}+j\\omega C_{in}\n      +\\frac{1+g_{m1}R_{D1}}{R_F} \\right]^{-1}}\n\\]\n\nwith the DC value \\(Z_{\\rm in}\\approx R_F/(1+g_{m1}R_{D1})\\).  The\ntwo‑stage gain (\\(A_v\\approx -g_{m1}R_{D1}\\)) makes the feedback\nbranch present a very low resistance to the input node, which\nminimizes the detrimental effect of the photodiode capacitance\n\\(C_{in}\\).",
        "format": "markdown",
        "sha256": "5edeb2d46a9f327bd825cae852e11fc21208c08fe5e7e49dbb47e8307b8e0704"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies shunt feedback and the qualitative Miller reduction of input resistance, but misidentifies the second stage and uses the wrong gain. It also omits the output-side resistance, so it does not obtain the required \u0000(R_F+R_{D2})/(1+A_0)\u0000 result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 47713,
        "total_tokens": 48141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42066,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 428,
        "output_tokens": 47713,
        "total_tokens": 48141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42066,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the VCO phase-noise contribution from the LDO’s thermal noise $S_{th}$ (a flat, white voltage-noise PSD on $V_{out}$), treat the problem as **low-frequency supply pushing** followed by **FM-to-phase conversion**:\n\n### 1. Identify the physical coupling\nIn your figure the LC tank nodes **X** and **Y** sit at DC potential $V_{out}$ because the inductors $L_1$ are short circuits at DC. Consequently any noise $v_n(t)$ on $V_{out}$ changes:\n* the DC bias across the MOS varactors ($M_{v1},M_{v2}$) – their capacitance is $C_{var}(V_{bias})$ with $V_{bias}\\approx V_{out}-V_{cont}$,\n* the parasitic capacitances of the cross-coupled pair ($C_{gs},C_{gd},C_{db}$ of $M_1,M_2$),\n* and therefore the total equivalent tank capacitance $C_{eq}(V_{out})$.\n\nThe oscillation frequency is\n$$\\omega_0(V_{out}) = \\frac{1}{\\sqrt{L\\,C_{eq}(V_{out})}}.$$\n\n### 2. Compute the supply-pushing gain\nDefine the VCO’s sensitivity to the LDO output (in Hz/V or rad/s/V):\n$$K_{f,VDD} \\equiv \\frac{\\partial f_0}{\\partial V_{out}} = -\\frac{f_0}{2C_{eq}}\\frac{\\partial C_{eq}}{\\partial V_{out}}, \\qquad\nK_{VDD} = 2\\pi K_{f,VDD}.$$\n\nYou obtain $K_{f,VDD}$ either:\n* **Analytically**: differentiate the C-V curves of the varactors and the MOS parasitic capacitance models (with $V_{DS}=V_{out}-V_{S}$ and $V_{GS}$ set by $I_{VCO}$).\n* **Numerically**: run a PSS sweep over $V_{out}$ and extract $\\Delta f_0/\\Delta V_{out}$.\n\n### 3. Model the instantaneous frequency deviation\nBecause $v_n(t)$ is the LDO’s thermal noise with PSD $S_{th}$:\n$$f(t) = f_0 + K_{f,VDD}\\,v_n(t).$$\n\nThe phase deviation is the integral of the frequency shift:\n$$\\phi(t) = 2\\pi\\int_0^t \\bigl[f(\\tau)-f_0\\bigr]\\,d\\tau\n= 2\\pi K_{f,VDD}\\int_0^t v_n(\\tau)\\,d\\tau.$$\n\n### 4. Convert to phase-noise spectral density\nIn the frequency domain the integral becomes a $1/(j2\\pi\\Delta f)$ factor, so for an offset $\\Delta f$:\n$$S_{\\phi}(\\Delta f) = \\left(\\frac{K_{VDD}}{2\\pi\\Delta f}\\right)^2 S_{th}\n= \\left(\\frac{K_{f,VDD}}{\\Delta f}\\right)^2 S_{th}.$$\n\nThe **single-sideband phase noise** is then:\n$$\\boxed{\\mathcal{L}(\\Delta f) = \\frac{S_{\\phi}(\\Delta f)}{2}\n= \\frac{K_{f,VDD}^2}{2(\\Delta f)^2}\\,S_{th}\n= \\frac{K_{VDD}^2}{8\\pi^2(\\Delta f)^2}\\,S_{th}.}$$\n\n### 5. Key practical notes for this specific circuit\n* **White noise $\\rightarrow$ $1/f^2$ profile**: Because $S_{th}$ is thermal (flat), the VCO phase noise due to the LDO rolls off as $1/(\\Delta f)^2$.\n* **Differential cancellation is incomplete**: Although $V_{out}$ is common-mode to nodes X and Y, the varactors and transistor parasitics are nonlinear, so $K_{f,VDD}\\neq 0$.\n* **LDO bandwidth**: If $S_{th}$ is specified at $V_{out}$ inside the LDO loop bandwidth, use that flat value; outside the loop bandwidth the LDO’s PSRR changes, but $S_{th}$ itself is still the output-referred thermal floor.\n* **AM-to-PM**: $V_{out}$ also modulates the tank amplitude (through $V_{DS}$ and current-source headroom). If your varactors are strongly nonlinear, add an AM-to-PM term to $K_{VDD}$.\n* **Simulation verification**: In SpectreRF (or similar), inject $v_n$ as a voltage source in series with $V_{out}$, run **PSS+Pnoise**, and look at the “phase noise” contribution of that source; the result should match the $K_{f,VDD}$ formula above.\n\nIn short: **measure (or simulate) $\\partial f_0/\\partial V_{out}$, then multiply $S_{th}$ by $[K_{f,VDD}/\\Delta f]^2/2$ to get the LDO-induced phase noise at offset $\\Delta f$.**",
        "format": "markdown",
        "sha256": "311503e829231b23052c700b55c3c542e92e87034504a42dd7d074d5e2735830"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly uses supply pushing, converts the LDO noise through the frequency sensitivity, and gives the expected 1/Δf² phase-noise dependence. It does not state the specific design takeaway that Kpush is closely related to KVCO and that reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 17051,
        "total_tokens": 18887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 17051,
        "total_tokens": 18887,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The key point is that the LDO does **not** inject noise into the RF signal path directly; rather, its thermal noise \\(v_n(t)\\) (with PSD \\(S_{th}(f)\\)) appears as a low‑frequency, common‑mode disturbance on the VCO supply \\(V_{out}\\). Because the tank inductors \\(L_1\\) are DC shorts, nodes **X** and **Y** sit at \\(V_{out}\\). The phase‑noise calculation therefore proceeds in three steps: (1) find how \\(V_{out}\\) modulates the tank capacitance; (2) obtain the **supply‑pushing gain** \\(K_{VDD}\\); and (3) treat the VCO as an FM modulator.\n\n---\n\n### 1. How \\(S_{th}\\) reaches the oscillator\nAt offset frequencies \\(f_m \\ll f_{osc}\\) the impedance of each \\(L_1\\) is essentially zero, so\n\n\\[\nV_X^{DC}(t)=V_Y^{DC}(t)=V_{out}+v_n(t).\n\\]\n\nThe common‑mode shift \\(\\Delta V_{CM}=v_n(t)\\) changes:\n* The NMOS varactors \\(M_{V1},M_{V2}\\) (gate at \\(V_{cont}\\), source/drain at nodes X/Y): their capacitance \\(C_{var}\\) depends on \\(V_{cont}-V_{CM}\\).\n* The parasitic capacitances \\(C_{gd},C_{db}\\) of the cross‑coupled pair \\(M_1,M_2\\) via \\(V_{DS}=V_{CM}-V_{CS}\\).\n* The tail current \\(I_{VCO}\\) if implemented by a transistor (channel‑length modulation).\n\nAll of these alter the total capacitance per node, \\(C_{tot}(V_{out})\\).\n\n---\n\n### 2. Supply pushing gain \\(K_{VDD}\\)\nThe oscillation frequency (differential mode) is\n\n\\[\nf_{osc}=\\frac{1}{2\\pi\\sqrt{L_1\\,C_{tot}(V_{out})}}.\n\\]\n\nThe **supply pushing coefficient** is defined as\n\n\\[\nK_{VDD}\\equiv\\frac{\\partial f_{osc}}{\\partial V_{out}}\n          =-\\frac{f_{osc}}{2C_{tot}}\\frac{dC_{tot}}{dV_{out}}.\n\\]\n\nYou obtain \\(K_{VDD}\\) either:\n* **Analytically:** by differentiating the \\(C\\!-\\!V\\) curves of the varactors and device parasitics, or\n* **Numerically:** by applying a small DC step \\(\\Delta V_{out}\\) in simulation and measuring \\(\\Delta f_{osc}\\).\n\n---\n\n### 3. FM analysis: from voltage noise to phase noise\nBecause \\(v_n(t)\\) is a baseband perturbation, it creates **frequency modulation**:\n\n\\[\nf_{inst}(t)=f_0+K_{VDD}\\,v_n(t).\n\\]\n\nThe phase deviation is the integral of frequency:\n\n\\[\n\\phi(t)=2\\pi\\int_0^t \\bigl[f_{inst}(\\tau)-f_0\\bigr]d\\tau\n      =2\\pi K_{VDD}\\int_0^t v_n(\\tau)\\,d\\tau .\n\\]\n\nIn the frequency domain (\\(f_m\\) = offset from carrier):\n\n\\[\n\\Phi(f_m)=\\frac{K_{VDD}}{j\\,f_m}V_n(f_m).\n\\]\n\nSince \\(v_n\\) has PSD \\(S_{th}(f_m)\\), the phase‑noise PSD due to the LDO is\n\n\\[\n\\boxed{S_{\\phi}(f_m)=\\left(\\frac{K_{VDD}}{f_m}\\right)^2 S_{th}(f_m)}\n\\]\n\nIf you define \\(K_{VDD}\\) in rad/s/V (\\(K_\\omega=\\partial\\omega/\\partial V_{DD}\\)), replace \\(K_{VDD}/f_m\\) with \\(K_{VDD}/(2\\pi f_m)\\).\n\nThe single‑sideband phase noise (the usual \\(\\mathcal{L}(f)\\) in dBc/Hz) for small phase deviations is\n\n\\[\n\\boxed{\\mathcal{L}_{LDO}(f_m)=\\frac{S_{\\phi}(f_m)}{2}\n      =\\frac{1}{2}\\left(\\frac{K_{VDD}}{f_m}\\right)^2 S_{th}(f_m).}\n\\]\n\n---\n\n### 4. Total VCO output phase noise\nThe LDO contribution is added to the **intrinsic** VCO phase noise (tank loss, device thermal/flicker noise, etc.) given by Leeson’s equation:\n\n\\[\n\\mathcal{L}_{tot}(f_m)=\\mathcal{L}_{intrinsic}(f_m)+\\mathcal{L}_{LDO}(f_m).\n\\]\n\nBecause \\(S_{th}(f)\\) is typically white up to the LDO bandwidth and then rolls off, \\(\\mathcal{L}_{LDO}(f_m)\\) falls as \\(1/f_m^2\\) (a \\(-20\\) dB/decade slope) multiplied by the LDO’s noise shape.\n\n---\n\n**In short:** compute \\(K_{VDD}=\\partial f_{osc}/\\partial V_{out}\\) from the varactor and parasitic \\(C\\!-\\!V\\) characteristics, then use the FM transfer function \\((K_{VDD}/f_m)^2\\) to convert the LDO thermal noise PSD \\(S_{th}\\) into phase noise.",
        "format": "markdown",
        "sha256": "cebbdb6eda8615845ab8bcd9bb247a0b5500893a55b8eca85a601db8df54afc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and derives the FM-to-phase-noise dependence on K_VDD² S_th/f_m², including the varactor path. It omits the explicit circuit-specific link between K_push and K_VCO and the resulting benefit of reducing K_VCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 23379,
        "total_tokens": 25215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 23379,
        "total_tokens": 25215,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the VCO phase-noise contribution from the LDO’s thermal noise, treat the LDO output as a “clean” DC supply $V_{out}$ plus a small random voltage perturbation $v_n(t)$ whose single-sided PSD is $S_{th}(f)$ (white up to the LDO loop bandwidth, then rolled off).\n\nThe key steps are:\n\n### 1. Find the supply-pushing (VDD-sensitivity) gain\nThe oscillation frequency depends on $V_{out}$ because:\n- The drain nodes X/Y sit at $V_{out}$ (the inductor $L_1$ is a DC short), so the varactors $M_{V1},M_{V2}$ see a bias of $V_{out}-V_{cont}$.\n- The cross-coupled transistors’ parasitic capacitances ($C_{gs},C_{gd},C_{db}$) also depend on $V_{DS}$ and $V_{GS}$, which are set by $V_{out}$.\n\nDefine the **supply pushing factor**\n\\[\nK_{\\rm push}\\;\\equiv\\;\\frac{\\partial f_{\\rm osc}}{\\partial V_{out}}\\quad\\text{(Hz/V)}\n\\]\nor, in angular frequency,\n\\[\nK_{VDD}\\;\\equiv\\;\\frac{\\partial \\omega_{\\rm osc}}{\\partial V_{out}}=2\\pi K_{\\rm push}\\quad\\text{(rad/s/V)}.\n\\]\n\n$K_{\\rm push}$ is obtained by:\n- **Simulation:** DC sweep $V_{out}$ and measure $f_{\\rm osc}$ (or $C_{\\rm eq}$ of the tank).\n- **Analysis:** Differentiate $f_{\\rm osc}=1/(2\\pi\\sqrt{L\\,C_{\\rm eq}(V_{out},V_{cont})})$ with respect to $V_{out}$ through the voltage-dependent varactor curves and transistor capacitances.\n\n### 2. Convert supply voltage noise to frequency noise\nBecause $v_n(t)$ is small,\n\\[\n\\Delta f(t)=K_{\\rm push}\\,v_n(t).\n\\]\nThus the frequency-fluctuation PSD is\n\\[\nS_{\\Delta f}(f)=K_{\\rm push}^2\\,S_{th}(f).\n\\]\n\n### 3. Integrate to phase (FM→PM)\nPhase is the integral of instantaneous frequency deviation:\n\\[\n\\phi(t)=2\\pi\\int_0^t \\Delta f(\\tau)\\,d\\tau.\n\\]\nIn the frequency domain,\n\\[\n\\Phi(f)=\\frac{2\\pi K_{\\rm push}}{j2\\pi f}V_n(f)\n      =\\frac{K_{\\rm push}}{jf}V_n(f),\n\\]\nso the phase-fluctuation PSD is\n\\[\nS_{\\phi}(f)=\\left(\\frac{K_{\\rm push}}{f}\\right)^2 S_{th}(f)\n          =\\left[\\frac{K_{VDD}}{2\\pi f}\\right]^2 S_{th}(f).\n\\]\n\n### 4. Obtain single-sideband phase noise\nUsing the standard definition $L(f)=S_{\\phi}(f)/2$ for small $\\phi$,\n\\[\n\\boxed{L(\\Delta f)=\\frac{K_{\\rm push}^2}{2(\\Delta f)^2}\\,S_{th}(\\Delta f)\n      =\\frac{K_{VDD}^2}{2(2\\pi \\Delta f)^2}\\,S_{th}(\\Delta f)}.\n\\]\n\n### 5. Shape and interpretation\n- $S_{th}$ is thermal (white), so $L(\\Delta f)\\propto 1/(\\Delta f)^2$.\n- At very small offsets the $1/f^2$ term can dominate; at larger offsets $S_{th}(f)$ rolls off with the LDO bandwidth.\n- The total VCO phase noise is the **sum** (in linear power) of this LDO-induced term and the intrinsic VCO noise (device thermal/flicker, $V_{cont}$ noise, etc.):\n  \\[\n  L_{\\rm tot}(\\Delta f)=L_{\\rm VCO, intrinsic}(\\Delta f)+L_{\\rm LDO}(\\Delta f).\n  \\]\n\n**In short:** compute $K_{\\rm push}=\\partial f_{\\rm osc}/\\partial V_{out}$ from the tank capacitance model or DC simulation, then apply the FM integration formula above to turn the LDO’s flat thermal spectrum $S_{th}$ into $1/f^2$ phase noise.",
        "format": "markdown",
        "sha256": "c2afef5ddad1112af434cd817928155b48a68492faf9fddca9dc2e7be8e14735"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly converts LDO noise through supply pushing and FM-to-PM, including the 1/Δf² dependence and direct varactor coupling. It omits the stated design insight that Kpush is closely related to KVCO and that reducing KVCO reduces this conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 24650,
        "total_tokens": 26486,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19698,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1836,
        "output_tokens": 24650,
        "total_tokens": 26486,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19698,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding the bypass capacitor **C_T from the common tail node (P) to ground** lowers the impedance at **2f₀** (twice the oscillation frequency). This changes the phase-noise behavior as follows:\n\n### 1. What happens at node P without C_T\nThe tail current source **I_SS** has very high output impedance, so the common-source node P develops a **large second-harmonic ripple** (v_P,₂f₀) because of the switching action of M₁/M₂. This 2f₀ voltage:\n* Modulates the transistor **C_GS** (via V_GS variation) → **AM-to-PM conversion**.\n* Acts as a mixing term that **upconverts the 1/f noise** of I_SS (and of the current-mirror that biases it) into phase noise around f₀.\n\n### 2. Effect of adding C_T\nC_T provides a low-impedance shunt to ground at 2f₀:\n$$Z_{P}(2f_0) \\approx \\frac{1}{j\\,2\\omega_0 C_T} \\ll R_{out,I_{SS}}$$\nThis **suppresses the second-harmonic amplitude** v_P,₂f₀ at the tail node.\n\n### 3. Impact on phase noise\nBecause the 2f₀ ripple is reduced:\n* **AM-to-PM conversion is weakened** (less C_GS modulation).\n* **1/f noise upconversion is suppressed** (the “mixer” term that converts low-frequency current noise into close-in phase noise is smaller).\n\n**Result:** The overall phase noise **decreases**, and the improvement is especially pronounced in the **close-in (1/f³) region**. The white-noise (1/f²) floor is also slightly improved because the tail current source operates more ideally.\n\n> **In short:** C_T filters the 2f₀ component at the tail node → smaller second-harmonic ripple → less AM-to-PM and 1/f-upconversion → **lower phase noise** (better close-in phase noise). C_T is open at DC, so it does not disturb the DC bias of I_SS.",
        "format": "markdown",
        "sha256": "ceb13a3b26747e295026d993b4140effa605bf6d2d98a877d4ff11d03aaf639f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that CT monotonically improves phase noise by filtering tail-node ripple, but the effect is nonmonotonic: class-C switching can improve phase noise over a range, while flicker-noise upconversion and excessive-CT instability can worsen it.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 16338,
        "total_tokens": 18663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 16338,
        "total_tokens": 18663,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding the bypass capacitor **\\(C_T\\)** to the tail (common-source) node **reduces the phase noise**—most noticeably the close-in **\\(1/f^3\\)** phase noise.\n\n### Why?\n\n1. **Suppresses the \\(2\\omega_0\\) ripple at the tail node**  \n   Without \\(C_T\\), the ideal current source \\(I_{SS}\\) has very high impedance at \\(2\\omega_0\\). The cross-coupled pair draws a current that has a strong \\(2\\omega_0\\) component; to keep \\(I_{D1}+I_{D2}=I_{SS}\\) constant, the tail voltage \\(V_P\\) develops a large sinusoidal ripple at \\(2\\omega_0\\).\n\n2. **Reduces \\(1/f\\) noise upconversion**  \n   The tail current source’s flicker (\\(1/f\\)) noise is up-converted to \\(\\omega_0\\pm\\Delta\\omega\\) by mixing with that \\(2\\omega_0\\) tail ripple (via the nonlinear switching of \\(M_1,M_2\\)). By adding \\(C_T\\), you provide a low-impedance path to ground at \\(2\\omega_0\\), which:\n   - clamps the \\(2\\omega_0\\) amplitude of \\(V_P\\), and\n   - shunts high-frequency noise currents from \\(I_{SS}\\).\n\n3. **Result**  \n   The conversion of low-frequency noise (especially \\(1/f\\) noise of \\(I_{SS}\\)) into phase noise is greatly weakened. Thus:\n   - **Close-in phase noise (\\(1/f^3\\) region) drops significantly.**\n   - The thermal-noise contribution from \\(I_{SS}\\) at \\(\\omega_0\\) is also partially suppressed because the capacitor diverts noise current away from the oscillator core.\n\n### Caveat\n\\(C_T\\) must be large enough that its impedance at \\(2\\omega_0\\) is small (\\(1/(2\\omega_0 C_T) \\ll R_{tail}\\)). If it is too small, it can resonate with the current source’s output resistance and can actually worsen the ripple; but when chosen properly, **\\(C_T\\) improves (lowers) overall phase noise**.\n\n**In short:** The phase noise decreases because \\(C_T\\) “filters” the tail node at \\(2\\omega_0\\), cutting off the primary mechanism that up-converts \\(I_{SS}\\) noise into oscillator phase noise.",
        "format": "markdown",
        "sha256": "c99154d4229356fb2c43e13865d34b37d834faa81a123f5ea2e6ba462df2b287"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that properly chosen CT monotonically improves phase noise through tail-node filtering. The key result is nonmonotonic: CT can cause flicker-noise upconversion, enable a class-C phase-noise improvement, and cause instability if too large.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 27833,
        "total_tokens": 30158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24074,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 27833,
        "total_tokens": 30158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24074,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding **Cₜ to the common tail (source) node** improves (lowers) the oscillator’s phase noise, especially the close‑in **1/f³ region**.\n\n### Why?\n\nIn a cross‑coupled LC oscillator the two branches switch differentially, so by symmetry the current drawn from the tail node is ideally constant DC (equal to **Iₛₛ**). In reality the transistor currents contain strong **even‑harmonic** content (mainly at **2f₀**). Because the current source **Iₛₛ** has high output impedance, that 2f₀ current has nowhere to go; it develops a **second‑harmonic voltage Vₛ,₂** on the tail node.\n\nThat **Vₛ,₂** is the key “pump” that up‑converts the tail current source’s **1/f flicker noise** into phase noise around the carrier:\n- The low‑frequency current noise **δiₙ(t)** slightly modulates the oscillation amplitude / DC operating point.\n- Mixing of **δiₙ(t)** with **Vₛ,₂** creates sidebands at **f₀ ± f_offset**, i.e. the **1/f³ phase‑noise skirt**.\n\n### What Cₜ does\n\nCₜ provides a **low‑impedance AC path to ground at 2f₀** (Z ≈ 1/(2π·2f₀Cₜ)). Hence:\n\n1. **Suppresses Vₛ,₂** – the 2f₀ current is shunted through Cₜ rather than developing a large voltage across the high‑impedance current source.\n2. **Reduces 1/f‑noise up‑conversion** – because the conversion gain is proportional to **(Vₛ,₂/V₀)²**, lowering Vₛ,₂ directly lowers the 1/f³ phase noise.\n3. **Bypasses high‑frequency thermal noise** from Iₛₛ, reducing its direct contribution as well.\n\n### Caveat\nCₜ does **not** filter the 1/f noise itself (that is low frequency, so Cₜ is open). To fully isolate the noisy current source from the second‑harmonic voltage, the best practice is a **tail filter**: a series inductor between Iₛₛ and the node (high Z at 2f₀) plus Cₜ to ground (low Z at 2f₀). Even with Cₜ alone, however, **phase noise decreases** compared with the unbypassed tail node.\n\n**Bottom line:** Cₜ reduces the second‑harmonic tail voltage → less flicker‑noise up‑conversion → **lower close‑in phase noise**.",
        "format": "markdown",
        "sha256": "bf3f6c734b8668515554324257ec4e8d26bf981bcdfa82ed3dc3ee8e686433c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT monotonically lowers phase noise through tail-node filtering, missing the nonmonotonic effect: CT can cause M1/M2 flicker-noise upconversion at small values, enable a class-C improvement at intermediate values, and cause low-frequency instability when too large.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 28243,
        "total_tokens": 30568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2325,
        "output_tokens": 28243,
        "total_tokens": 30568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The schematic shows **two identical cross‑coupled LC oscillator cores** (upper: nodes \\(X_1,Y_1\\); lower: nodes \\(X_2,Y_2\\)) that are coupled to each other through the cross‑wired transistor gates (the “twisted” connections in the middle).  \nEach core is a standard **differential LC VCO**:\n\n* An inductor \\(L\\) from each drain node to the supply (AC ground).\n* The total capacitance \\(C\\) at each node is the sum of transistor parasitics (\\(C_{gs},C_{gd},C_{db}\\)) plus any varactor or load capacitance.\n* The cross‑coupled NMOS pairs provide **negative differential resistance** that cancels the loss resistance \\(R_p\\) of the inductors.\n\n---\n\n### 1.  Resonance of one tank\n\nFor a single node (say \\(X_1\\)) the impedance seen to ground is the parallel combination of the inductor and the node capacitance:\n\n\\[\nZ(j\\omega)=j\\omega L \\;\\|\\; \\frac{1}{j\\omega C}\n          =\\frac{j\\omega L}{1-\\omega^2LC}.\n\\]\n\nThe reactance vanishes (impedance is purely resistive, maximum) at the **LC resonance**\n\n\\[\n\\boxed{\\;\\omega_0=\\frac{1}{\\sqrt{LC}}\\;}\n\\qquad\\Longleftrightarrow\\qquad\n\\boxed{\\;f_0=\\frac{1}{2\\pi\\sqrt{LC}}\\;}.\n\\]\n\n---\n\n### 2.  Start‑up (Barkhausen) condition\n\nThe cross‑coupled transistors give an effective negative resistance between the two differential nodes:\n\n\\[\nR_{\\text{neg}}=-\\frac{2}{g_m}.\n\\]\n\nTo sustain oscillation the loop gain must satisfy\n\n\\[\n\\frac{R_p}{|R_{\\text{neg}}|} \\ge 1\n\\;\\;\\Rightarrow\\;\\;\ng_m R_p \\ge 2.\n\\]\n\nWhen this holds, the circuit oscillates **at the tank’s resonant frequency** \\(\\omega_0\\), because that is the only frequency where the phase shift around the loop is 0° (or 360°) and the amplitude can build up.\n\n---\n\n### 3.  Effect of the second (coupled) core\n\nBecause the two cores are cross‑coupled as shown, the 4‑node system has two normal modes:\n\n| Mode | Phase relation of the two cores | Frequency |\n|------|--------------------------------|-----------|\n| **In‑phase** (0°) | \\(X_1\\!-\\!X_2\\) and \\(Y_1\\!-\\!Y_2\\) in phase | \\(\\omega_0/\\sqrt{1+k}\\) (usually suppressed) |\n| **Quadrature** (90°) | \\(X_1,Y_1\\) lead \\(X_2,Y_2\\) by 90° | \\(\\approx \\omega_0\\) (desired) |\n\nFor **weak to moderate coupling** (\\(k\\ll 1\\)) the quadrature mode—the one intended in this topology—oscillates at essentially the individual tank frequency:\n\n\\[\n\\boxed{\\;f_{\\text{osc}}\\approx f_0=\\frac{1}{2\\pi\\sqrt{LC}}\\;}\n\\]\n\nwith the upper and lower differential pairs running 90° apart.\n\n---\n\n### 4.  Numerical estimate (typical on‑chip values)\n\nIf no explicit component values are given, express the result symbolically as above.  \nFor illustration, with common IC values:\n\n* \\(L \\approx 1.0\\;\\text{nH}\\)\n* Total node capacitance \\(C \\approx C_{gs}+C_{gd}+C_{db} \\approx 150\\;\\text{fF}\\)\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{(1\\times10^{-9})(150\\times10^{-15})}}\n          \\approx \\frac{1}{2\\pi\\sqrt{1.5\\times10^{-22}}}\n          \\approx 13\\;\\text{GHz}.\n\\]\n\n---\n\n## Bottom line\n\nThe circuit is a **dual‑core cross‑coupled LC quadrature oscillator**. Its oscillation frequency is set by the LC tanks, not by transistor delay:\n\n\\[\n\\boxed{f_{\\text{osc}}\\;\\approx\\;\\frac{1}{2\\pi\\sqrt{LC}}}\n\\]\n\nwhere \\(L\\) is the inductance of each coil and \\(C\\) is the total capacitance at nodes \\(X_1,Y_1,X_2,Y_2\\). The cross‑coupled devices only provide the required negative resistance (\\(g_mR_p\\ge 2\\)) to start and sustain the oscillation at that resonant frequency.",
        "format": "markdown",
        "sha256": "818f77dbe207005fb0003c0b6c00d3d7229a62424b3571ad10697522efc036e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly gives the uncoupled tank resonance, but incorrectly concludes the coupled oscillator runs at that frequency and omits the coupling-induced shift, approximately Δω = αω₀/(2Q).",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 8219,
        "total_tokens": 10224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 8219,
        "total_tokens": 10224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7663,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **dual-core cross‑coupled LC oscillator** (a quadrature‑coupled oscillator).  \nEach “half” (top: nodes $X_1,Y_1$; bottom: nodes $X_2,Y_2$) contains:\n\n* two cross‑coupled NMOS pairs (one biased by $I_{SS}$, the other by $I_1$) that present a **negative differential resistance**,\n* inductive loads $L$ from the supply rail to the output nodes,\n* tail current sources that set the DC bias and $g_m$ of the devices.\n\nBecause the MOS devices are physically small, the dominant frequency‑determining elements are the **inductors $L$** and the **total capacitance $C_{\\rm eq}$** at each node (transistor parasitics $C_{gs},C_{gd},C_{db}$ plus any load capacitance).\n\n---\n\n### 1. Oscillation mechanism\nA single cross‑coupled pair acts like a negative resistor:\n$$R_{\\rm neg} \\approx -\\frac{2}{g_m}$$\nWith two such pairs sharing the same drains, the effective negative resistance is lower (more negative):\n$$R_{\\rm neg,tot} \\approx -\\frac{2}{g_{m,SS}+g_{m,1}}$$\n\nThe inductors and node capacitances form a differential LC tank with resonance\n$$\\omega_0 = \\frac{1}{\\sqrt{L\\,C_{\\rm eq}}}$$\nAt $\\omega_0$ the tank impedance is purely resistive ($R_p = Q\\omega_0 L$). Oscillation starts when the negative resistance cancels the tank loss:\n$$|R_{\\rm neg,tot}| \\le R_p \\quad\\Longrightarrow\\quad g_{m,{\\rm eff}}R_p \\ge 2$$\n\nOnce the amplitude builds up, nonlinearities limit the loop gain to unity, and the circuit settles at the **tank resonant frequency**.\n\n---\n\n### 2. Frequency formula\nBecause $L$ is explicit and $C_{\\rm eq}$ is the parasitic capacitance of the cross‑coupled devices, the oscillation frequency is essentially the LC resonance:\n\n$$\\boxed{f_{\\rm osc} \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\rm eq}}}}$$\n\nFor a differential LC oscillator each side contributes inductance $L$ to AC ground, so the differential inductance is $2L$ and the differential capacitance is $C_{\\rm eq}/2$, yielding exactly $1/\\sqrt{LC_{\\rm eq}}$.\n\n---\n\n### 3. Numerical estimate (typical integrated values)\nNo component values are printed, but for RF CMOS designs the orders of magnitude are:\n\n| Parameter | Typical value |\n|-----------|---------------|\n| On‑chip inductor $L$ | $1\\!-\\!10$ nH |\n| Node capacitance $C_{\\rm eq}$ (MOS + routing) | $100\\!-\\!500$ fF |\n\nUsing a representative middle value:\n$$L = 3\\ \\text{nH},\\qquad C_{\\rm eq} = 300\\ \\text{fF}$$\n\n$$f_{\\rm osc} \\approx \\frac{1}{2\\pi\\sqrt{(3\\times10^{-9})(3\\times10^{-13})}}\n          = \\frac{1}{2\\pi\\sqrt{9\\times10^{-22}}}\n          \\approx \\frac{1}{2\\pi(3\\times10^{-11})}\n          \\approx \\mathbf{5.3\\ GHz}$$\n\nMore generally:\n* **Low GHz** (e.g. 1–2 GHz): larger $L$ ($\\sim$10 nH) or smaller $C$.\n* **Mid GHz** (e.g. 2–6 GHz): $L \\approx 2\\!-\\!5$ nH, $C \\approx 200\\!-\\!400$ fF.\n* **Higher GHz** (> 10 GHz): sub‑nH inductors with very small devices.\n\n---\n\n### 4. Role of the two coupled cores\nThe top and bottom halves are electrically coupled (through the cross‑connected lines between $X_1\\!\\leftrightarrow\\!X_2$ and $Y_1\\!\\leftrightarrow\\!Y_2$). This forces the two tanks to oscillate at **the same frequency** $\\omega_0$ but with a **90° (quadrature) phase shift** between the two cores—i.e. outputs $(X_1,Y_1)$ and $(X_2,Y_2)$ are quadrature signals.\n\nBecause the coupling is relatively weak compared with the tank $Q$, the frequency shift from $\\omega_0$ is small; to first order:\n\n$$\\boxed{f_{\\rm osc} \\approx \\frac{1}{2\\pi\\sqrt{L C_{\\rm eq}}} \\;\\sim\\; \\text{a few GHz}}$$\n\n**Bottom line:** Estimate the frequency from the LC tank resonance. Without explicit $L$ and $C$ values, the oscillation lies in the **1–10 GHz range** (most commonly **2–5 GHz** for typical integrated inductors and MOS parasitics).",
        "format": "markdown",
        "sha256": "a1665e1234ff0ad0dde9b7860a4d70b9ae50c3df1930dcd877307b4ef470246d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the tank resonance, but misses the central coupling-induced shift, approximately Δω = αω₀/(2Q), and instead says the oscillator settles at the unshifted tank frequency. The specific GHz estimate also relies on component values not given in the figure.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 13874,
        "total_tokens": 15879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 13874,
        "total_tokens": 15879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "thinkingmachines/inkling-small",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a **dual‑core cross‑coupled LC quadrature oscillator** (two identical differential LC tanks stacked and cross‑coupled so that the upper core and lower core run 90° out of phase).\n\n### What sets the frequency?\nEach “half” of the circuit (the upper block with nodes $X_1,Y_1$ and the lower block with $X_2,Y_2$) is a standard cross‑coupled LC oscillator core:\n\n* Each node is tied to the supply (AC ground) through an inductor $L$.\n* The total capacitance seen at each node to ground is $C$ (transistor parasitics $C_{gs},C_{gd}$ plus any explicit tuning capacitance; if none are shown, $C$ is the effective load capacitance).\n* The cross‑coupled NMOS pairs (the two branches biased by $I_{SS}$ and $I_1$ in each block) present a **negative resistance** that cancels the loss of the inductor ($R_p \\approx Q\\omega L$).\n\nBecause the tanks are purely reactive, oscillation can only occur at the **parallel resonance** of each LC node:\n\n\\[\n\\omega_{\\text{tank}} = \\frac{1}{\\sqrt{L C}}\n\\]\n\nThe cross‑coupling between the upper and lower cores (the crossed connections in the middle of the figure) forces the two tanks to lock in quadrature, but to first order it does **not** shift the frequency away from $\\omega_0$; it only determines the phase relationship.\n\n### Oscillation frequency estimate\n\\[\n\\boxed{f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{L C}}}\n\\]\n\nor in angular frequency:\n\n\\[\n\\boxed{\\omega_{\\text{osc}} \\approx \\frac{1}{\\sqrt{L C}}}\n\\]\n\n---\n\n### Startup condition (for completeness)\nEach cross‑coupled pair contributes a small‑signal negative resistance of about $-2/g_m$. With two such pairs in parallel per core, the total negative resistance is $\\approx -1/g_m$. Oscillation starts when this cancels the tank loss:\n\n\\[\n\\frac{1}{g_m} \\le R_p \\quad\\Longrightarrow\\quad g_m R_p \\ge 1\n\\]\n\nIf $R_p = Q\\omega_0 L$, this gives a minimum required $g_m$.\n\n---\n\n**Bottom line:** Because the inductors are explicit and the capacitance is the node capacitance $C$ (device + load), the circuit oscillates at essentially the LC resonance of each tank:\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC}}\n\\]\n\n(For typical on‑chip values—say $L \\sim 1\\;\\text{nH}$ and $C \\sim 100\\;\\text{fF}$—this puts $f_{\\text{osc}}$ in the **5–10 GHz** range, but symbolically it is $1/(2\\pi\\sqrt{LC})$.)",
        "format": "markdown",
        "sha256": "374fa261dda5da457622195d13575e20868dc74f7339086683c5e2b7684d529e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The LC tank resonance is a correct baseline, but the answer wrongly claims coupling causes no first-order frequency shift. It omits the essential estimate Δω ≈ αω₀/(2Q) (or an equivalent form), so its stated oscillation frequency misses the central result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 12792,
        "total_tokens": 14797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12706,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2005,
        "output_tokens": 12792,
        "total_tokens": 14797,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12706,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    }
  ]
}
