{
  "model_key": "kimi_k27",
  "display_name": "Kimi K2.7",
  "provider": "moonshot",
  "evaluation_model_ids": [],
  "thinking_effort": "thinking",
  "configuration_note": "Kimi K2.7 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (moonshotai/kimi-k2.7-code) with thinking on (the model has no effort levels). Requests set max_tokens to 235,929, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Kimi K2.7 on 2026-11-10 ($0.60 input, $0.16 cached input, $3.50 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 76,
          "incorrect_count": 74,
          "partial_credit_count": 49,
          "zero_count": 25,
          "mean_score_0_to_4": 2.566666666666667,
          "score_percent": 64.16666666666667,
          "score_distribution": {
            "0": 25,
            "1": 27,
            "2": 12,
            "3": 10,
            "4": 76
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 76,
          "incorrect_count": 74,
          "partial_credit_count": 49,
          "zero_count": 25,
          "mean_score_0_to_4": 2.566666666666667,
          "score_percent": 64.16666666666667,
          "score_distribution": {
            "0": 25,
            "1": 27,
            "2": 12,
            "3": 10,
            "4": 76
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 57,
          "incorrect_count": 33,
          "partial_credit_count": 14,
          "zero_count": 19,
          "mean_score_0_to_4": 2.7444444444444445,
          "score_percent": 68.61111111111111,
          "score_distribution": {
            "0": 19,
            "1": 11,
            "2": 1,
            "3": 2,
            "4": 57
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 57,
          "incorrect_count": 33,
          "partial_credit_count": 14,
          "zero_count": 19,
          "mean_score_0_to_4": 2.7444444444444445,
          "score_percent": 68.61111111111111,
          "score_distribution": {
            "0": 19,
            "1": 11,
            "2": 1,
            "3": 2,
            "4": 57
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 19,
          "incorrect_count": 41,
          "partial_credit_count": 35,
          "zero_count": 6,
          "mean_score_0_to_4": 2.3,
          "score_percent": 57.49999999999999,
          "score_distribution": {
            "0": 6,
            "1": 16,
            "2": 11,
            "3": 8,
            "4": 19
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 19,
          "incorrect_count": 41,
          "partial_credit_count": 35,
          "zero_count": 6,
          "mean_score_0_to_4": 2.3,
          "score_percent": 57.49999999999999,
          "score_distribution": {
            "0": 6,
            "1": 16,
            "2": 11,
            "3": 8,
            "4": 19
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 24,
        "incorrect_count": 26,
        "partial_credit_count": 20,
        "zero_count": 6,
        "mean_score_0_to_4": 2.62,
        "score_percent": 65.5,
        "score_distribution": {
          "0": 6,
          "1": 10,
          "2": 5,
          "3": 5,
          "4": 24
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 28,
        "incorrect_count": 22,
        "partial_credit_count": 13,
        "zero_count": 9,
        "mean_score_0_to_4": 2.66,
        "score_percent": 66.5,
        "score_distribution": {
          "0": 9,
          "1": 7,
          "2": 4,
          "3": 2,
          "4": 28
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 24,
        "incorrect_count": 26,
        "partial_credit_count": 16,
        "zero_count": 10,
        "mean_score_0_to_4": 2.42,
        "score_percent": 60.5,
        "score_distribution": {
          "0": 10,
          "1": 10,
          "2": 3,
          "3": 3,
          "4": 24
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 11355,
        "input_tokens": 306918,
        "output_tokens": 1547999,
        "total_tokens": 1854917
      },
      "known_totals": {
        "cached_input_tokens": 11355,
        "input_tokens": 306918,
        "output_tokens": 1547999,
        "total_tokens": 1854917
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 17,
          "incorrect_count": 13,
          "partial_credit_count": 8,
          "zero_count": 5,
          "mean_score_0_to_4": 2.6666666666666665,
          "score_percent": 66.66666666666666,
          "score_distribution": {
            "0": 5,
            "1": 6,
            "3": 2,
            "4": 17
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 1,
          "zero_count": 7,
          "mean_score_0_to_4": 2.966666666666667,
          "score_percent": 74.16666666666667,
          "score_distribution": {
            "0": 7,
            "1": 1,
            "4": 22
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 18,
          "incorrect_count": 12,
          "partial_credit_count": 5,
          "zero_count": 7,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 7,
            "1": 4,
            "2": 1,
            "4": 18
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 12,
          "zero_count": 1,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "0": 1,
            "1": 4,
            "2": 5,
            "3": 3,
            "4": 7
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 6,
          "incorrect_count": 14,
          "partial_credit_count": 12,
          "zero_count": 2,
          "mean_score_0_to_4": 2.2,
          "score_percent": 55.00000000000001,
          "score_distribution": {
            "0": 2,
            "1": 6,
            "2": 4,
            "3": 2,
            "4": 6
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 6,
          "incorrect_count": 14,
          "partial_credit_count": 11,
          "zero_count": 3,
          "mean_score_0_to_4": 2.15,
          "score_percent": 53.75,
          "score_distribution": {
            "0": 3,
            "1": 6,
            "2": 2,
            "3": 3,
            "4": 6
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For a MOSFET, the intrinsic gain is\n\n\\[\nA_i = g_m r_o\n\\]\n\nwhere \\(g_m\\) is transconductance and \\(r_o\\) is the small-signal output resistance.\n\nIf you double **both** the length \\(L\\) and width \\(W\\):\n\n- The ratio \\(W/L\\) stays the same, so for a fixed bias current and overdrive voltage, \\(g_m\\) is roughly unchanged.\n- The output resistance \\(r_o \\propto L\\) because \\(\\lambda \\propto 1/L\\). Doubling \\(L\\) therefore doubles \\(r_o\\) (in long-channel approximation).\n\nSo the intrinsic gain approximately **doubles**:\n\n\\[\nA_i \\approx g_m r_o \\;\\Rightarrow\\; A_i \\text{ increases by about a factor of } 2\n\\]\n\nIn compact form:\n\n\\[\nA_i \\approx \\frac{2V_A}{V_{OV}}, \\qquad V_A \\propto L\n\\]\n\nwhere \\(V_A\\) is the Early voltage and \\(V_{OV}\\) is the overdrive voltage. Thus, intrinsic gain is mainly set by channel length, not width.\n\n**Caveats:** In short-channel devices, the relationship is weaker because of velocity saturation, DIBL, and bias-dependent output resistance, but the qualitative trend remains: gain improves with longer channel length.",
        "format": "markdown",
        "sha256": "04ecbe9b626fb8f038d2ea3a2f9a3ef784b3afc4f9fe45375a9bdb20bf67f6be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves W/L, gm, and approximately ID unchanged at fixed overdrive, while the longer channel approximately doubles ro and intrinsic gain. The stated long-channel assumptions are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3384,
        "total_tokens": 3412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 3384,
        "total_tokens": 3412,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If both the length **L** and width **W** are doubled, the **intrinsic gain roughly doubles** (assuming fixed bias and long-channel behavior).\n\nThe intrinsic gain is\n\n\\[\nA_v = g_m r_o\n\\]\n\nDoubling **both** \\(L\\) and \\(W\\) keeps the aspect ratio \\(W/L\\) the same, so for a given \\(V_{GS}\\):\n\n- **Transconductance \\(g_m\\)** stays approximately the same, because \\(g_m \\propto W/L\\).\n- **Output resistance \\(r_o\\)** approximately doubles, since \\(r_o \\propto 1/\\lambda\\) and the channel-length modulation parameter \\(\\lambda \\propto 1/L\\). With \\(L\\) doubled, \\(\\lambda\\) is roughly halved, raising \\(r_o\\).\n\nSo\n\n\\[\nA_v = g_m r_o \\approx (\\text{same}) \\times (2r_o) \\approx 2A_v\n\\]\n\nIn short-channel modern processes the increase may be a bit less than 2× due to DIBL, velocity saturation, and other second-order effects, but qualitatively the gain improves because the drain resistance rises faster than transconductance falls.",
        "format": "markdown",
        "sha256": "10eb40d885562ac36a8cea117748f61ecd8bdd6e75db7fb96a9c1724fea0405d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions preserves W/L and, at fixed overdrive, gm and drain current, while the reduced channel-length modulation raises ro. The stated long-channel assumption is appropriate; the short-channel caveat does not change the essential answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1044,
        "total_tokens": 1072,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 1044,
        "total_tokens": 1072,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **intrinsic gain** is\n\n\\[\nA_0 = g_m r_o = \\frac{g_m}{g_{ds}}\n\\]\n\nIf you **double both the width (W) and length (L)** of a MOSFET, the aspect ratio **W/L stays the same**, but the channel is twice as long.\n\n### What changes\n\n- **Transconductance \\(g_m\\):** Since \\(W/L\\) is unchanged and the bias current/overdrive is roughly unchanged, \\(g_m\\) stays about the same.\n- **Output resistance \\(r_o\\):** \\(r_o\\) improves with channel length because channel-length modulation is weaker for longer channels. Roughly, \\(r_o \\propto L\\). Doubling \\(L\\) approximately **doubles \\(r_o\\)**.\n\n### Result\n\n\\[\nA_0 = g_m r_o \\;\\Rightarrow\\; A_0 \\text{ roughly doubles}\n\\]\n\nIn a **long-channel/square-law approximation**, it very nearly doubles. In a **short-channel modern process**, the increase may be a bit less than 2× because \\(r_o\\) does not scale perfectly with \\(L\\) due to DIBL and other short-channel effects.\n\nSo, doubling both W and L improves the intrinsic gain, mainly because the transistor becomes a “longer” device with higher output resistance.",
        "format": "markdown",
        "sha256": "b6ee3fb875871ff3bb29427782d0f0b34a046822e52e3cdf50b9c21b5eac0775"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that with W/L and overdrive held constant, gm is approximately unchanged, ro roughly doubles as L increases, and intrinsic gain therefore roughly doubles. The short-channel caveat is reasonable.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 4600,
        "total_tokens": 4628,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 4600,
        "total_tokens": 4628,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what is being held constant.\n\nFor a long-channel MOSFET in saturation:\n\n- If the transistor size \\(W/L\\) is fixed and you increase the overdrive  \n  \\[\n  V_{OV}=V_{GS}-V_{th},\n  \\]\n  then\n  \\[\n  g_m=\\mu C_{ox}\\frac{W}{L}V_{OV}.\n  \\]\n  Here \\(g_m\\) increases with overdrive, so **Student A would be correct**.\n\n- But if the drain current \\(I_D\\) is held fixed (a common analog-design situation), then\n  \\[\n  g_m=\\frac{2I_D}{V_{OV}}.\n  \\]\n  So for the same current, increasing the overdrive *decreases* the transconductance, making **Student B correct**.\n\nSo the key distinction is:\n\n- **Fixed \\(W/L\\), varying \\(V_{GS}\\):** \\(g_m\\) rises with overdrive.\n- **Fixed \\(I_D\\):** \\(g_m\\) falls as overdrive increases.\n\nIf the question assumes constant drain current, **Student B is correct**. If it assumes a fixed transistor being driven harder, **Student A is correct**.",
        "format": "markdown",
        "sha256": "cdd131a203037a7af4df759060940dc92574fafff194737b65bc7aae5325c80e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that for a fixed transistor size, increasing overdrive increases gm, so Student A is correct; it also accurately explains Student B’s result when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 1316,
        "total_tokens": 1356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 1316,
        "total_tokens": 1356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nFor a MOSFET operating in saturation (the usual region for amplification), the drain current is approximately\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2\n\\]\n\nThe overdrive voltage is\n\n\\[\nV_{OV} = V_{GS} - V_{TH}\n\\]\n\nThe transconductance is\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nSo, for a given device, **\\(g_m\\) increases as the overdrive voltage increases**.\n\n(If the transistor enters velocity saturation, \\(g_m\\) tends to saturate rather than keep rising, but it does not go down with increasing overdrive.)",
        "format": "markdown",
        "sha256": "92805babf367984b895de75040795ea4d8a250b92cb538933b4f99f65b1e9da0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device size and derives that, under the square-law saturation model, gm is proportional to VOV. The velocity-saturation caveat does not undermine the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 434,
        "total_tokens": 474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 434,
        "total_tokens": 474,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct** (under the usual assumption of a fixed device in saturation).\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2\n\\]\n\nand the transconductance is\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})\n\\]\n\nSince the overdrive voltage is \\(V_{OV}=V_{GS}-V_{TH}\\),\n\n\\[\ng_m \\propto V_{OV}\n\\]\n\nSo as the overdrive voltage increases, \\(g_m\\) increases.\n\n**Caveat:** If the transistor is biased at a *fixed* drain current, then \\(g_m = 2I_D/V_{OV}\\), and increasing \\(V_{OV}\\) would decrease \\(g_m\\). But based on the straightforward device relationship, Student A is right.",
        "format": "markdown",
        "sha256": "78735a972fcd1d1b991e937a180408ac3c5d515670e704d8955495761c714ea3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and derives that gm increases with overdrive; the fixed-current caveat is also accurate.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 742,
        "total_tokens": 782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 40,
        "output_tokens": 742,
        "total_tokens": 782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — **the small-signal AC model of a PMOS is topologically identical to that of an NMOS.**\n\nFor both devices the linearized small-signal model is:\n\n- A voltage-controlled current source \\(g_m v_{gs}\\)\n- An output resistance \\(r_o\\) between drain and source\n- A body-effect current source \\(g_{mb} v_{bs}\\) (if body terminal is not tied to source)\n- Parasitic capacitances \\(C_{gs}, C_{gd}, C_{db}, C_{sb}\\)\n\nThe differences are not in the small-signal model itself, but in:\n\n1. **Sign conventions / reference voltages**  \n   For an NMOS, \\(g_m\\) is usually written with \\(v_{gs}\\) and current flowing from drain to source.  \n   For a PMOS, it can be written with \\(v_{sg}\\) and current from source to drain, but if you define everything in terms of \\(v_{gs}\\), the model looks exactly the same; only the sign of the current source direction changes accordingly.\n\n2. **DC biasing**  \n   PMOS devices require opposite voltage polarities and opposite threshold-sign conventions to turn on.\n\n3. **Parameter values**  \n   Because holes have lower mobility than electrons, PMOS transconductance is typically lower for the same size and current.\n\nSo, once you linearize around the operating point and use consistent small-signal variables, the **PMOS and NMOS small-signal equivalent circuits are the same.**",
        "format": "markdown",
        "sha256": "59465f5567bcc554867896349e429442beb04fc046c647a104da0cf7d9039cdb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS small-signal model is the same in form as the NMOS model and notes the sign-convention differences.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 740,
        "total_tokens": 767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 422,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 740,
        "total_tokens": 767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 422,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — the **small-signal topology** of a PMOS is identical to that of an NMOS.\n\nIn the standard low-frequency small-signal model, both devices are represented by:\n\n- A gate-source controlled current source \\(g_m v_{gs}\\)\n- An output resistance \\(r_o\\)\n- If the body terminal is not tied to the source, a body-effect transconductance \\(g_{mb} v_{bs}\\)\n\nThe key differences are in the **DC operating point and parameter signs/values**, not in the model structure:\n\n1. **Sign conventions:**  \n   For a PMOS in saturation, the source is at a higher potential than the gate and drain. If you use the NMOS convention where \\(v_{gs} = v_g - v_s\\), then \\(v_{gs}\\) is negative for a PMOS. The actual conduction is proportional to \\(v_{sg} = v_s - v_g\\). So if you write the model in terms of \\(v_{sg}\\), the controlled source direction flips appropriately, giving the same sign behavior as an NMOS with \\(v_{gs}\\).\n\n2. **Transconductance expression:**  \n   For an NMOS:\n   \\[\n   g_m = \\frac{2I_D}{V_{GS}-V_{THN}} = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}\n   \\]\n   For a PMOS:\n   \\[\n   g_m = \\frac{2I_D}{V_{SG}-|V_{THP}|} = \\sqrt{2\\mu_p C_{ox}\\frac{W}{L}I_D}\n   \\]\n   The form is the same; only the mobility and threshold-voltage sign differ.\n\n3. **Output resistance:**\n   \\[\n   r_o \\approx \\frac{1}{\\lambda I_D}\n   \\]\n   is the same in form for both devices.\n\n4. **Capacitances:**  \n   The high-frequency small-signal model is also identical topologically, with capacitors \\(C_{gs}\\), \\(C_{gd}\\), \\(C_{sb}\\), and \\(C_{db}\\). Their numerical values differ because of different mobility, doping, and geometry, but the model structure is the same.\n\nSo, for small-signal AC analysis, you can use the same equivalent circuit for PMOS and NMOS; you just have to be careful with the DC bias signs and the magnitudes of the parameters.",
        "format": "markdown",
        "sha256": "48d5439f5bff6ad16b35ce4dd71cb9cdb5edcec6ed4b801ec2c1a2524c9cbe39"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same topology/form as the NMOS model and notes the relevant polarity and parameter differences.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 867,
        "total_tokens": 888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 867,
        "total_tokens": 888,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**topologically, the small-signal model of a PMOS is identical to that of an NMOS**. It contains the same elements:\n\n- Gate current ≈ 0  \n- A voltage-controlled drain current source  \n- Output resistance \\( r_o \\)  \n- Parasitic capacitances \\( C_{gs}, C_{gd}, C_{sb}, C_{db} \\)\n\nHowever, the **sign conventions and bias relationships differ**.\n\nFor an NMOS:\n\\[\ni_d = g_m v_{gs}, \\quad g_m \\approx \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}\n\\]\n\nFor a PMOS, if you keep the same small-signal terminal labels, the controlled current flows in the opposite direction, or equivalently:\n\\[\ni_d = -g_m v_{gs} = g_m v_{sg}\n\\]\nwhere \\( g_m \\) is still taken as a positive value.\n\nAlso:\n- The body-effect transconductance \\( g_{mb} \\) depends on \\( |V_{SB}| \\) for PMOS, and its polarity may be reversed depending on convention.\n- DC bias voltages are of opposite sign: PMOS uses \\( V_{SG} \\), \\( V_{SD} \\), and \\( |V_{tp}| \\).\n\nSo in practice, the **schematic symbol and small-signal model look the same**, but you must be careful with the **polarity of the controlled source and the sign of the bias voltages**.",
        "format": "markdown",
        "sha256": "dc4624ce95b63662e859a4bf85aa5477963dae405dab51b8cf75d0434a54bce7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model and notes the relevant polarity conventions.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 733,
        "total_tokens": 761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 28,
        "output_tokens": 733,
        "total_tokens": 761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is a **diode‑connected NMOS**: gate and drain are shorted to the top node, and the source is grounded. Therefore\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nso the device is always in **saturation** once it turns on.\n\nThe sketch of \\(I_X\\) vs. \\(V_X\\) is:\n\n```\nI_X\n |\n |                       *\n |                     *\n |                   *\n |                 *\n |               *\n |             *\n |           *\n |         *\n |       *\n |     *\n |   *\n |__*_________________________ V_X\n    0     V_TH\n```\n\nFor an ideal long‑channel device:\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X < V_{TH} \\\\[6pt]\n\\dfrac{1}{2}\\mu_n C_{ox}\\dfrac{W}{L}(V_X-V_{TH})^2, & V_X \\ge V_{TH}\n\\end{cases}\n\\]\n\nKey points:\n\n* **\\(V_X < V_{TH}\\):** The transistor is off, so \\(I_X \\approx 0\\).\n* **\\(V_X = V_{TH}\\):** The transistor just turns on; the curve starts with zero slope.\n* **\\(V_X > V_{TH}\\):** \\(I_X\\) increases quadratically because the diode‑connected MOSFET stays in saturation.\n* Including channel‑length modulation makes the curve rise slightly faster, but the shape is still a parabola starting at \\(V_{TH}\\).",
        "format": "markdown",
        "sha256": "926a5941f80cf7d4b1716c3e15f7916aee1c196064bec7e5d8f057bebe1a4990"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives the near-zero current below threshold and quadratic rise above threshold. The saturation reasoning and channel-length-modulation note are consistent with the golden solution.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 3563,
        "total_tokens": 4861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1298,
        "output_tokens": 3563,
        "total_tokens": 4861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **n-channel** MOSFET with its body tied to ground:\n\nBecause the gate and drain are shorted,\n\n\\[\nV_{GS}=V_{DS}=V_X\n\\]\n\nSo \\(M_1\\) is a **diode-connected NMOS**. For \\(V_X>0\\), current can flow only from the drain terminal into the source.\n\n### Current equation\n\nUsing the long-channel (square-law) model:\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X < V_{TH} \\\\[6pt]\n\\dfrac{1}{2}\\mu_n C_{ox}\\dfrac{W}{L}\\,(V_X-V_{TH})^2, & V_X \\ge V_{TH}\n\\end{cases}\n\\]\n\nIf channel-length modulation is included:\n\n\\[\nI_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X-V_{TH})^2\\,(1+\\lambda V_X)\n\\]\n\nSince \\(V_{DS}=V_{GS}\\), the transistor is always in **saturation** once it turns on; it never enters triode.\n\n### Sketch\n\n- For \\(V_X<V_{TH}\\): \\(I_X\\approx 0\\) (cutoff).\n- At \\(V_X=V_{TH}\\): \\(I_X=0\\), and the curve just begins to rise.\n- For \\(V_X>V_{TH}\\): \\(I_X\\) follows a parabola starting from \\((V_{TH},0)\\).\n\nA real NMOS also has a **drain-to-bulk diode**. For negative \\(V_X\\) that diode becomes forward biased, so a small negative current appears for \\(V_X \\lesssim -0.6\\text{–}0.8\\,\\text{V}\\).\n\n```\n      IX\n       ^\n       |                .\n       |             .\n       |          .\n       |       .\n       |    .\n       | .\n-------+--------------------> VX\n       0     VTH\n       |\n       |   (real device: small negative\n       |    diode current for VX << 0)\n```\n\nIf \\(M_1\\) were a PMOS, the same shape would be mirrored into the third quadrant (current for negative \\(V_X\\)).",
        "format": "markdown",
        "sha256": "4491ec61bc26d8eb2f3da3977eb9e02762bb6badae33cf94fb243c3437825c3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current up to threshold, followed by a quadratic rise in saturation. The added nonessential details do not contradict the essential result.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1300,
        "output_tokens": 6619,
        "total_tokens": 7919,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6138,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1300,
        "output_tokens": 6619,
        "total_tokens": 7919,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6138,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is a **diode‑connected NMOS**: gate tied to drain, source/body grounded.\n\n### Key behavior\n\n- **Gate–source voltage:** \\(V_{GS}=V_X\\)\n- **Drain–source voltage:** \\(V_{DS}=V_X\\)\n\nSo whenever the device turns on, it is always in **saturation**, because\n\n\\[\nV_{DS}=V_X > V_X-V_{TH}=V_{GS}-V_{TH}\n\\]\n\nFor an ideal long‑channel device:\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X \\le V_{TH} \\\\[4pt]\n\\dfrac{1}{2}\\mu_n C_{ox}\\dfrac{W}{L}\\,(V_X-V_{TH})^2, & V_X > V_{TH}\n\\end{cases}\n\\]\n\nIncluding channel‑length modulation:\n\n\\[\nI_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X-V_{TH})^2\\bigl(1+\\lambda V_X\\bigr)\n\\]\n\n---\n\n### Sketch\n\n```\n        IX\n        ^\n        |                           *\n        |                        *\n        |                      *\n        |                    *\n        |                  *\n        |               *\n        |            *\n        |          *\n        |        *\n        |      *\n--------+----+------------------------> VX\n       VTH\n```\n\n- For \\(V_X < V_{TH}\\): the MOSFET is off, so \\(I_X \\approx 0\\).\n- At \\(V_X = V_{TH}\\): current starts with zero slope.\n- For \\(V_X > V_{TH}\\): \\(I_X\\) rises roughly as a **parabola** \\((V_X-V_{TH})^2\\).\n\n#### If you also include the drain–bulk pn junction\n\nWhen \\(V_X\\) goes negative, the drain becomes negative with respect to the grounded body, so the drain–body diode can turn on around \\(-0.6\\text{–}0.7\\,\\text{V}\\) and conduct a negative current:\n\n```\n        IX\n        ^\n        |                           /\n        |                        /\n        |                      /\n        |                    /\n        |                  /\n        |               /\n        |            /\n        |          /\n--------+----+----+-------------------> VX\n       -VD  VTH\n       /\n      /\n```\n\n---\n\n### Sign convention note\n\nThe arrow in the figure points from the drain node toward the positive terminal of \\(V_X\\). If you take \\(I_X\\) as the current **through the transistor** (magnitude), the curve is positive as drawn above. If you take the arrow literally as “current leaving the node,” then the same curve is simply mirrored about the \\(V_X\\)-axis.",
        "format": "markdown",
        "sha256": "bd99743894bea77d333d8a21620dacc78704bd1e8922aac0280ab20a22c4908e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current below threshold and a quadratic rise above threshold. The saturation reasoning is sound; the added channel-length modulation and negative-voltage junction discussion do not undermine the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1300,
        "output_tokens": 4279,
        "total_tokens": 5579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1300,
        "output_tokens": 4279,
        "total_tokens": 5579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assume \\(M_1\\) is an **n‑channel MOSFET** with threshold voltage \\(V_{TH}\\), and assume \\(I_X\\) is the current flowing from the \\(1\\,\\text{V}\\) source into the drain and down through the transistor to ground.\n\nBecause the drain is tied to an ideal \\(1\\,\\text{V}\\) source:\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\,\\text{V}\n\\]\n\nThe transistor therefore goes through three regions as \\(V_X\\) is swept:\n\n| Region | Condition | Current \\(I_X\\) |\n|---|---|---|\n| Cutoff | \\(V_X < V_{TH}\\) | \\(I_X \\approx 0\\) |\n| Saturation | \\(V_{TH} < V_X < V_{TH}+1\\,\\text{V}\\) | \\(I_X=\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X-V_{TH})^2\\) |\n| Triode/linear | \\(V_X > V_{TH}+1\\,\\text{V}\\) | \\(I_X=\\mu_n C_{ox}\\frac{W}{L}\\left[(V_X-V_{TH})(1)-\\frac{1^2}{2}\\right]\\) |\n\nSo the sketch of \\(I_X\\) vs. \\(V_X\\) is:\n\n```\n Ix\n  ^\n  |                         /\n  |                       /\n  |                     /\n  |                   /\n  |                 /   (linear region)\n  |              .\n  |           .\n  |        .             (saturation: parabolic)\n  |     .\n  |  .\n  |.\n  +----------------------------> Vx\n      VTH        VTH + 1 V\n```\n\n- For \\(V_X < V_{TH}\\): current is zero.\n- For \\(V_{TH} < V_X < V_{TH}+1\\,\\text{V}\\): current rises quadratically.\n- For \\(V_X > V_{TH}+1\\,\\text{V}\\): current rises linearly.\n\nThe two pieces meet smoothly at \\(V_X = V_{TH}+1\\,\\text{V}\\).\n\nIf the arrow for \\(I_X\\) in your figure is defined in the opposite direction, simply flip the curve about the \\(V_X\\)-axis.",
        "format": "markdown",
        "sha256": "c1ed22f92bad95619016080bbc0d73d57940447151382d6012bb1e6c1b9ea37b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with the quadratic rise up to VTH + 1 V and roughly linear rise thereafter.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 5432,
        "total_tokens": 6884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 5432,
        "total_tokens": 6884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is an **NMOS** with its source grounded and its drain held at a fixed \\(1\\,\\text{V}\\). Thus\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\,\\text{V}\n\\]\n\nand the drain current \\(I_X\\) is the current entering the drain terminal as defined by the arrow.\n\nAssume an ideal long-channel MOSFET with threshold voltage \\(V_{TH}\\).\n\n### Regions of operation\n\n1. **Cutoff**\n   \\[\n   V_X < V_{TH}\n   \\]\n   \\[\n   I_X = 0\n   \\]\n\n2. **Saturation**  \n   The transistor is saturated when \\(V_{DS}\\ge V_{GS}-V_{TH}\\):\n   \\[\n   V_{TH}\\le V_X \\le V_{TH}+1\\,\\text{V}\n   \\]\n   \\[\n   I_X=\\frac{1}{2}K_n\\bigl(V_X-V_{TH}\\bigr)^2\n   \\]\n   where \\(K_n=\\mu_nC_{ox}\\frac{W}{L}\\).\n\n3. **Triode (linear)**  \n   When \\(V_{GS}-V_{TH}>V_{DS}\\):\n   \\[\n   V_X > V_{TH}+1\\,\\text{V}\n   \\]\n   With \\(V_{DS}=1\\,\\text{V}\\) fixed,\n   \\[\n   I_X=K_n\\Bigl[\\bigl(V_X-V_{TH}\\bigr)(1)-\\frac{1^2}{2}\\Bigr]\n   =K_n\\bigl(V_X-V_{TH}-0.5\\bigr)\n   \\]\n   This is a straight line whose slope matches the parabola’s slope at the boundary \\(V_X=V_{TH}+1\\,\\text{V}\\).\n\n### Sketch\n\n```\n      I_X\n       |\n       |                /\n       |               /  (triode, linear)\n       |              /\n       |            .  <- V_X = V_TH + 1 V\n       |           /\n       |          /   (saturation, parabolic)\n       |         /\n       |        /\n       |_______/_____________ V_X\n             V_TH\n```\n\n- For \\(V_X<V_{TH}\\): \\(I_X=0\\).\n- For \\(V_{TH}<V_X<V_{TH}+1\\,\\text{V}\\): \\(I_X\\) rises parabolically.\n- For \\(V_X>V_{TH}+1\\,\\text{V}\\): \\(I_X\\) rises linearly.\n\nThe transition from saturation to triode occurs when the gate overdrive equals the fixed drain voltage, i.e. \\(V_X-V_{TH}=1\\,\\text{V}\\).",
        "format": "markdown",
        "sha256": "205de2c7e4077c12067f3f4200105f4e4ed726164605d44d75634fadf2c44455"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, quadratic saturation for VTH < VX < VTH + 1 V, and the transition to a roughly linear triode-region rise above that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 3510,
        "total_tokens": 4964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1454,
        "output_tokens": 3510,
        "total_tokens": 4964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **NMOS** with its source grounded and body tied to source, we have:\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\ \\text{V}\n\\]\n\nLet \\(K=\\mu_n C_{ox}\\frac{W}{L}\\) and \\(V_{TH}>0\\) be the threshold voltage.\n\nThe current \\(I_X\\) (taken as the drain current flowing from the \\(1\\ \\text{V}\\) source down through \\(M_1\\)) is piecewise:\n\n\\[\nI_X =\n\\begin{cases}\n0, & V_X < V_{TH} \\\\[4pt]\n\\dfrac{K}{2}(V_X-V_{TH})^2, & V_{TH} < V_X < V_{TH}+1 \\\\[8pt]\nK\\big[(V_X-V_{TH})(1)-\\tfrac{1}{2}\\big], & V_X > V_{TH}+1\n\\end{cases}\n\\]\n\nSo the sketch is:\n\n- **Cutoff** for \\(V_X<V_{TH}\\): \\(I_X=0\\).\n- **Saturation** for \\(V_{TH}<V_X<V_{TH}+1\\): square-law (parabolic) increase.\n- **Triode** for \\(V_X>V_{TH}+1\\): linear increase with slope \\(K\\).\n\n```\n      I_X\n       |\n       |                /\n       |              /\n       |            /\n       |          /   <-- linear (triode)\n       |        .\n       |      /       V_X = V_TH + 1 V\n       |    /\n       |  /           parabolic (saturation)\n       |/\n       +------------------------ V_X\n          V_TH\n```\n\nAt the boundary \\(V_X=V_{TH}+1\\), both expressions give \\(I_X=\\dfrac{K}{2}\\), and the slope is continuous.\n\n*Note:* If the arrow for \\(I_X\\) in the figure points opposite to the drain current, simply negate the plot. Also, channel-length modulation would scale the saturation current by a constant factor \\((1+\\lambda V_{DS})\\) but would not change the qualitative shape.",
        "format": "markdown",
        "sha256": "8595210777d03dd5a568c46dd8b427e5fe683acc72d7b68426dd26b9b145654b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the cutoff, quadratic saturation, and roughly linear triode-region behavior, with the correct transition at V_X = V_TH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 6793,
        "total_tokens": 8245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6333,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1452,
        "output_tokens": 6793,
        "total_tokens": 8245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6333,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No — not by itself.**\n\nThe transistor is **diode‑connected**: its gate and drain are both tied to ground, while the terminal \\(X\\) is its source (the arrow indicates a PMOS source). For a PMOS in this connection,\n\n\\[\nV_{SG}=V_X-0=V_X,\\qquad V_{SD}=V_X-0=V_X\n\\]\n\nSo the current is\n\n\\[\nI_X=\\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\bigl(V_X-|V_{thp}|\\bigr)^2\n\\]\n\n(once \\(V_X>|V_{thp}|\\), and ignoring channel‑length modulation).\n\nBecause \\(I_X\\) varies strongly with the voltage \\(V_X\\) across the device, it does **not** supply a constant current independent of voltage. Instead it behaves like a **nonlinear resistor** (a diode‑connected MOSFET).\n\nA MOSFET can approximate a current source only when it is biased in saturation **with a fixed gate–source voltage** and the drain/source voltage is allowed to vary. Here the gate–source voltage itself equals \\(V_X\\), so the current is voltage‑dependent.\n\nSo the device acts as a nonlinear resistor, not a current source.",
        "format": "markdown",
        "sha256": "f55574b43ca34be5e7cd2a44a621bcec06dba25f08677bcffdc828127909f941"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS connections and concludes the diode-connected device is a nonlinear resistor, not a current source. It omits the key low-impedance point (approximately 1/gm), required for full credit.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 575,
        "output_tokens": 2915,
        "total_tokens": 3490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 575,
        "output_tokens": 2915,
        "total_tokens": 3490,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No — not for a standard enhancement‑mode MOSFET.**\n\nIn the figure, both the **gate** and the **source** of \\(M_1\\) are grounded. Therefore\n\n\\[\nV_{GS}=V_G-V_S=0\n\\]\n\nFor an enhancement‑mode transistor, a non‑zero gate‑source voltage of at least \\( |V_{TH}| \\) is required to turn the device on. With \\(V_{GS}=0\\):\n\n* The transistor is in **cutoff** (off).\n* The drain current is essentially zero, except for tiny leakage.\n* There is no controlled current source action.\n\nA MOSFET acts as a current source only when it is biased in **saturation** by a fixed \\(V_{GS}\\) that makes \\(I_D\\) largely independent of \\(V_{DS}\\). That condition is missing here.\n\n> **Exception:** If \\(M_1\\) were a **depletion‑mode** (or zero‑threshold/native) device, it could conduct at \\(V_{GS}=0\\) and potentially act as a current source. But under the usual enhancement‑mode CMOS assumption, the answer is **no**.",
        "format": "markdown",
        "sha256": "b241539352acc3d68a4ea15dcac0b7327c99215761dfbbeda0d63bb2f65ccb79"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The “no” conclusion is reached for the wrong reason: M1’s source is not grounded; it is a diode-connected PMOS with gate and drain grounded. The answer misses its low impedance (about 1/gm), the key reason it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 577,
        "output_tokens": 2048,
        "total_tokens": 2625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1803,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 577,
        "output_tokens": 2048,
        "total_tokens": 2625,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1803,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No — not as a practical current source.\n\nThe device is a **diode-connected PMOS** transistor \\(M_1\\): its **gate and drain are both grounded**, while the source is the terminal carrying current \\(I_X\\).\n\nFor a MOSFET to act like a current source it should:\n\n1. have a **fixed gate-source voltage** \\(V_{SG}\\), and  \n2. operate in **saturation** so that the current is mostly independent of the drain-source voltage.\n\nHere, however,\n\n\\[\nV_{SG}=V_X,\\qquad V_{SD}=V_X\n\\]\n\nso the current is a strong function of the voltage across the device:\n\n\\[\nI_X \\approx \\frac{1}{2}\\mu_p C_{ox}\\frac{W}{L}\\bigl(V_X-|V_{THP}|\\bigr)^2(1+\\lambda V_X)\n\\]\n\nIf \\(V_X\\) changes, \\(I_X\\) changes significantly. The small-signal resistance looking into the source is roughly\n\n\\[\nR_{out} \\approx \\frac{1}{g_m} \\parallel r_o\n\\]\n\nwhich is low, not the high resistance required of a current source.\n\nSo this two-terminal device behaves like a **nonlinear resistor / diode**, not a stable current source. To make a current source, the gate would need to be biased by a fixed voltage (e.g., in a current mirror), independent of the output voltage.",
        "format": "markdown",
        "sha256": "473677f4d2b95dc1f044fd5d212448469089f0bbdb5bb893404a4376312f9314"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS with its gate and drain grounded, and explains that its low small-signal resistance (about 1/gm) makes it a nonlinear resistor rather than a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 569,
        "output_tokens": 3123,
        "total_tokens": 3692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2816,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 569,
        "output_tokens": 3123,
        "total_tokens": 3692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2816,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: PMOS Common-Source Amplifier with Source Degeneration\n\n## 1. Circuit Identification\n\nThe circuit is a **PMOS common-source (CS) amplifier with source degeneration**:\n\n- **M₁**: PMOS transistor (arrow on the source points *inward* toward the channel).\n- **R_S**: Source degeneration resistor connected between **V_DD** (AC ground) and the source.\n- **R_D**: Drain load resistor connected between the drain and ground.\n- **V_in**: Applied to the gate.\n- **V_out**: Taken at the drain.\n\nBecause the input is at the gate and the output is at the drain, with the source as the common terminal, this is a common-source topology. The resistor **R_S** provides **negative feedback** (source degeneration), which stabilizes the gain and increases output resistance.\n\n---\n\n## 2. DC Analysis / Biasing\n\nLet **I_D** be the DC drain current (flowing from source to drain for PMOS).\n\n**KVL around the loop:**\n\\[\nV_{DD} = I_D R_S + V_{SD} + I_D R_D\n\\]\n\nSo:\n\\[\nV_{SD} = V_{DD} - I_D(R_S + R_D)\n\\]\n\n**Source and drain voltages:**\n\\[\nV_S = V_{DD} - I_D R_S, \\qquad V_D = V_{out} = I_D R_D\n\\]\n\n**Gate-source voltage (magnitude-relevant):**\n\\[\nV_{SG} = V_S - V_G = (V_{DD} - I_D R_S) - V_{in,DC}\n\\]\n\nFor M₁ to operate in **saturation** (active region for amplification), the PMOS condition is:\n\\[\nV_{SD} \\ge V_{SG} - |V_{thp}|\n\\]\n\nSubstituting gives the useful condition on the output node:\n\\[\nV_{out} \\le V_{in} + |V_{thp}|\n\\]\n\nThe drain current in saturation is:\n\\[\nI_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG} - |V_{thp}|)^2(1 + \\lambda V_{SD})\n\\]\n\n---\n\n## 3. Small-Signal Analysis\n\n### Small-Signal Voltage Gain\n\nUsing the small-signal model of the PMOS with transconductance **g_m** and output resistance **r_o = 1/(λ I_D)**:\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1 + g_m R_S + \\dfrac{R_S + R_D}{r_o}}\n\\]\n\nThe **negative sign** indicates the amplifier is **inverting** — increasing **V_in** reduces **V_SG**, which reduces **I_D**, which reduces the voltage drop across **R_D**, causing **V_out** to fall.\n\n### Useful Approximations\n\n1. **If** \\(r_o \\gg R_S, R_D\\) **(long-channel or low-λ):**\n\\[\nA_v \\approx -\\frac{g_m R_D}{1 + g_m R_S}\n\\]\n\n2. **If** \\(g_m R_S \\gg 1\\) **(strong degeneration):**\n\\[\nA_v \\approx -\\frac{R_D}{R_S}\n\\]\n\nThis is an important result: with enough source degeneration, the gain becomes **approximately independent of transistor parameters**, set only by the resistor ratio.\n\n### Input Resistance\n\nThe gate of a MOSFET draws negligible current:\n\\[\nR_{in} \\approx \\infty\n\\]\n\n### Output Resistance\n\nLooking into the drain node (including **R_D**):\n\\[\nR_{out} = R_D \\parallel \\left[r_o(1 + g_m R_S)\\right]\n\\]\n\nSource degeneration **boosts the intrinsic output resistance** of the transistor by the factor \\((1 + g_m R_S)\\). If \\(r_o\\) is very large, \\(R_{out} \\approx R_D\\).\n\n---\n\n## 4. Frequency Response\n\nThe high-frequency response is dominated by the MOSFET capacitances:\n\n- **C_gs**: gate-source capacitance\n- **C_gd**: gate-drain capacitance (subject to Miller multiplication)\n- **C_db**: drain-bulk capacitance\n\n### Miller-Effect Input Capacitance\n\\[\nC_{in} \\approx C_{gs} + C_{gd}(1 + |A_v|)\n\\]\n\n### Approximate Poles\n- **Input pole:** \\(\\omega_{p,in} \\approx \\dfrac{1}{R_{source} \\cdot C_{in}}\\)\n- **Output pole:** \\(\\omega_{p,out} \\approx \\dfrac{1}{R_{out} \\cdot (C_{db} + C_{gd} + C_L)}\\)\n\nwhere \\(C_L\\) is any load capacitance and \\(R_{source}\\) is the source resistance driving the input.\n\n---\n\n## 5. Design Trade-offs\n\n| Feature | Effect of \\(R_S\\) | Effect of \\(R_D\\) |\n|---|---|---|\n| **Gain** | Reduces gain from \\(-g_m R_D\\) toward \\(-R_D/R_S\\) | Increases gain but reduces headroom |\n| **Linearity** | Improves linearity (reduces distortion) | — |\n| **Output resistance** | Increases intrinsic \\(R_{out}\\) | Sets \\(R_{out}\\) if \\(r_o\\) is large |\n| **Bandwidth** | Reduces bandwidth by adding a pole/zero at source | Larger \\(R_D\\) reduces output pole bandwidth |\n| **Headroom** | Reduces available \\(V_{SD}\\), limiting swing | Reduces available \\(V_{SD}\\), limiting swing |\n\n### Notes:\n- A **bypass capacitor** across \\(R_S\\) would remove the degeneration at AC, restoring gain to \\(A_v \\approx -g_m(R_D \\parallel r_o)\\) while preserving DC bias stability.\n- If the PMOS body (n-well) is connected to **V_DD** rather than the source, **body effect** adds \\(g_{mb}\\). Replace \\(g_m\\) with \\((g_m + g_{mb})\\) in the denominator of gain and output-resistance expressions.\n\n---\n\n## Summary\n\nThis is a **PMOS common-source amplifier with source degeneration**. Its small-signal voltage gain is:\n\n\\[\n\\boxed{A_v = -\\frac{g_m R_D}{1 + g_m R_S + \\dfrac{R_S + R_D}{r_o}}}\n\\]\n\nwith very high input resistance and output resistance approximately given by:\n\n\\[\n\\boxed{R_{out} \\approx R_D \\parallel \\left[r_o(1 + g_m R_S)\\right]}\n\\]\n\nUnder strong degeneration, the gain simplifies to the resistor ratio:\n\n\\[\n\\boxed{A_v \\approx -\\frac{R_D}{R_S}}\n\\]",
        "format": "markdown",
        "sha256": "0f98e09a97f52ee9a2c9000a6477e9301dfae44c96b50da0de9ef758772537c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain, including the correct finite-ro form and the required approximation. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 11506,
        "total_tokens": 13063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 11506,
        "total_tokens": 13063,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: PMOS Common‑Source Amplifier with Source Degeneration\n\nThe circuit is a **PMOS common-source (CS) amplifier with source degeneration**. The transistor $M_1$ is a PMOS device; its source is tied through $R_S$ to $V_{DD}$ and its drain is tied through $R_D$ to ground. The input is applied at the gate, and the output is taken at the drain. For small-signal analysis, $V_{DD}$ is an AC ground.\n\n---\n\n## 1. DC Biasing\n\nLet the DC component of $V_{in}$ be $V_{IN}$. The transistor currents and voltages are:\n\n- Source voltage:  \n  $$V_S = V_{DD} - I_D R_S$$\n\n- Drain/output voltage:  \n  $$V_{OUT} = V_D = I_D R_D$$\n\n- Source-to-gate voltage:  \n  $$V_{SG} = V_S - V_G = V_{DD} - I_D R_S - V_{IN}$$\n\nFor $M_1$ to conduct and operate in **saturation**:\n\n$$V_{SG} > |V_{TH}|$$\n\nand\n\n$$V_{SD} \\ge V_{SG} - |V_{TH}|$$\n\nwhere\n\n$$V_{SD} = V_S - V_D = V_{DD} - I_D(R_S + R_D)$$\n\nUsing the saturation current equation,\n\n$$I_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)(V_{SG} - |V_{TH}|)^2$$\n\nsubstituting $V_{SG}$ gives a quadratic equation in $I_D$ (or in $V_{OV}=V_{SG}-|V_{TH}|$) that must be solved for the quiescent bias point.\n\n---\n\n## 2. Small-Signal Model\n\nThe small-signal equivalent uses:\n- Gate current $\\approx 0$ $\\Rightarrow$ infinite input resistance.\n- A voltage-controlled current source $g_m v_{sg}$ from source to drain.\n- Transistor output resistance $r_o$ between drain and source.\n\nDefine $v_s$ as the small-signal voltage at the source node. Then\n\n$$v_{sg} = v_s - v_{in}$$\n\n---\n\n## 3. Voltage Gain\n\n### Case A: Neglecting channel-length modulation ($r_o \\to \\infty$)\n\n**KCL at the source node:**\n\n$$\\frac{v_s}{R_S} + g_m(v_s - v_{in}) = 0$$\n\n$$v_s = \\frac{g_m R_S}{1 + g_m R_S} v_{in}$$\n\n**KCL at the drain node:**\n\n$$g_m(v_s - v_{in}) = \\frac{v_{out}}{R_D}$$\n\nSubstituting $v_s$:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1 + g_m R_S}}$$\n\nThe gain is **inverting** and its magnitude is reduced by the factor $(1+g_m R_S)$ compared with an ideal non-degenerated CS stage.\n\n### Case B: Including channel-length modulation ($r_o$ finite)\n\nA more exact expression is:\n\n$$\\boxed{A_v = -\\frac{g_m R_D}{1 + g_m R_S + \\dfrac{R_S + R_D}{r_o}}}$$\n\nWhen $r_o \\to \\infty$, this reduces to the result above.\n\n---\n\n## 4. Input and Output Resistance\n\n- **Input resistance:**  \n  Looking into the gate, ideally no current flows, so  \n  $$\\boxed{R_{in} = \\infty}$$\n\n- **Output resistance:**  \n  The resistance looking up into the drain is increased by source degeneration to approximately $r_o(1+g_m R_S)+R_S$. In parallel with $R_D$:\n\n  $$\\boxed{R_{out} = R_D \\parallel \\big[r_o(1+g_m R_S)+R_S\\big]}$$\n\n  If $r_o \\to \\infty$, then simply $R_{out} \\approx R_D$.\n\n---\n\n## 5. Key Observations\n\n| Feature | Effect of $R_S$ |\n|---|---|\n| **Gain** | Reduced from $-g_m R_D$ to $-\\dfrac{g_m R_D}{1+g_m R_S}$ |\n| **Linearity** | Improved; gain becomes less sensitive to $g_m$ variations |\n| **Output resistance** | Increased |\n| **Bandwidth** | Usually improved due to reduced Miller effect |\n| **Resistor-ratio limit** | If $g_m R_S \\gg 1$, $A_v \\approx -\\dfrac{R_D}{R_S}$ |\n\nThus, this stage trades raw gain for improved linearity, higher output impedance, and more predictable gain set by a resistor ratio.",
        "format": "markdown",
        "sha256": "aff30a2c68789db42764329fb08538371b13255592f9e7876f2366aabf9b3ac6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The finite-ro refinement is consistent with the stated assumptions; omitted body effect is not essential.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 7830,
        "total_tokens": 9385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1555,
        "output_tokens": 7830,
        "total_tokens": 9385,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS common-source amplifier with source degeneration**.\n\n- **Transistor**: \\(M_1\\) is a p-channel MOSFET (the arrow on the source points inward).\n- **Input**: applied to the gate.\n- **Output**: taken at the drain.\n- **\\(R_S\\)**: unbypassed source resistor. It provides **source degeneration** (local series feedback).\n- **\\(R_D\\)**: drain load resistor.\n\nBecause the device is PMOS, the supply current flows from \\(V_{DD}\\) through \\(R_S\\), through \\(M_1\\) (source to drain), and down through \\(R_D\\) to ground.\n\n---\n\n## 1. DC bias analysis\n\nLet \\(I_D\\) be the quiescent drain-current magnitude (source-to-drain).\n\n\\[\nV_S = V_{DD} - I_D R_S\n\\]\n\n\\[\nV_D = V_{\\text{out}} = I_D R_D\n\\]\n\nThe gate-source voltage magnitude is\n\n\\[\nV_{SG} = V_S - V_{\\text{in}} = V_{DD} - I_D R_S - V_{\\text{in}}\n\\]\n\nand the source-drain voltage is\n\n\\[\nV_{SD} = V_S - V_D = V_{DD} - I_D(R_S+R_D)\n\\]\n\nIf \\(M_1\\) is biased in saturation (the usual operating region for an amplifier),\n\n\\[\nI_D = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)\n\\bigl(V_{SG}-|V_{thp}|\\bigr)^2\n\\bigl(1+\\lambda V_{SD}\\bigr)\n\\]\n\nwhere \\(|V_{thp}|\\) is the PMOS threshold magnitude and \\(\\lambda\\) models channel-length modulation.\n\n**Saturation conditions**\n\n\\[\nV_{SG} > |V_{thp}|\n\\]\n\n\\[\nV_{SD} \\ge V_{SG}-|V_{thp}|\n\\]\n\nIgnoring \\(\\lambda\\), the bias current is found from the quadratic\n\n\\[\nI_D = \\frac{1}{2}K\\bigl(V_{DD}-V_{\\text{in}}-|V_{thp}|-I_D R_S\\bigr)^2\n\\]\n\nwith \\(K=\\mu_p C_{ox}(W/L)\\).\n\n---\n\n## 2. Small-signal parameters\n\nAt the operating point:\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{SG}}\n= \\sqrt{2\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)I_D}\n\\]\n\n\\[\nr_o = \\frac{1}{\\lambda I_D}\n\\]\n\nIf the PMOS body (n-well) is tied to \\(V_{DD}\\) rather than to its source, body effect is present and is represented by \\(g_{mb}\\). If body and source are shorted, \\(g_{mb}=0\\).\n\n---\n\n## 3. Voltage gain\n\nUsing the small-signal equivalent circuit, the voltage gain is\n\n\\[\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_m R_D}\n{1 + g_m R_S + \\frac{R_S+R_D}{r_o}}\n\\]\n\nIf body effect is significant, replace \\(g_m R_S\\) with \\((g_m+g_{mb})R_S\\):\n\n\\[\nA_v =\n-\\frac{g_m R_D}\n{1 + (g_m+g_{mb})R_S + \\frac{R_S+R_D}{r_o}}\n\\]\n\n**Important observations**\n\n- The gain is **negative**: increasing \\(V_{\\text{in}}\\) reduces \\(V_{SG}\\), reduces \\(I_D\\), and therefore lowers \\(V_{\\text{out}}\\).\n- If \\(r_o \\gg R_D, R_S\\),\n\n\\[\nA_v \\approx -\\frac{g_m R_D}{1+g_m R_S}\n= -\\frac{R_D}{\\frac{1}{g_m}+R_S}\n\\]\n\n- For large degeneration, \\(g_m R_S \\gg 1\\),\n\n\\[\nA_v \\approx -\\frac{R_D}{R_S}\n\\]\n\nso the gain becomes set mainly by a resistor ratio, which improves predictability and linearity.\n\n---\n\n## 4. Input and output resistance\n\n### Input resistance\n\nThe gate draws essentially zero DC current, so\n\n\\[\nR_{\\text{in}} \\approx \\infty\n\\]\n\n(at low frequency; at high frequency it is limited by gate capacitances).\n\n### Output resistance\n\nLooking into the drain node, the transistor itself presents an increased resistance because of source degeneration:\n\n\\[\nR_{\\text{out, transistor}} = r_o\\bigl[1+(g_m+g_{mb})R_S\\bigr]+R_S\n\\]\n\nThe total output resistance including the drain resistor is\n\n\\[\nR_{\\text{out}} = R_D \\parallel\n\\Bigl(r_o\\bigl[1+(g_m+g_{mb})R_S\\bigr]+R_S\\Bigr)\n\\]\n\nIf \\(R_S=0\\), this reduces to the familiar\n\n\\[\nR_{\\text{out}} = R_D \\parallel r_o\n\\]\n\n---\n\n## 5. Qualitative summary\n\n| Feature | Effect of \\(R_S\\) |\n|---|---|\n| Voltage gain | Reduced, but more stable and linear |\n| Output resistance | Increased |\n| Input resistance | Remains very high |\n| Linearity / dynamic range | Improved because the gain depends less strongly on transistor nonlinearity |\n| Headroom | Consumes some \\(V_{SD}\\) voltage headroom |\n\nIn short, this is a **source-degenerated PMOS common-source stage**. It trades gain for improved linearity, higher output resistance, and reduced sensitivity to transistor parameters.",
        "format": "markdown",
        "sha256": "fb7289fdbf59e9accf8d8da49cd65e2eba17194ded38f5cfb3e4a2fdc1c11ff5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS) in the appropriate limit. The finite-ro and body-effect refinements are also consistent.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 9678,
        "total_tokens": 11227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1549,
        "output_tokens": 9678,
        "total_tokens": 11227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-drain (CD) amplifier**, also known as a **source follower**. It uses an NMOS transistor $M_1$ with:\n- **Gate**: driven by input $V_\\text{in}$\n- **Drain**: tied to $V_{DD}$ (AC ground)\n- **Source**: connected to ground through $R_S$\n- **Output**: taken at the source terminal ($V_\\text{out}$)\n\nBelow is a complete analysis.\n\n---\n\n## 1. DC Analysis / Biasing\n\nIn DC steady state, the transistor must be in saturation. The drain current flows through $R_S$, so:\n\n$$I_D = \\frac{V_\\text{out}}{R_S}$$\n\nFor an NMOS in saturation:\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_{GS} - V_{th})^2$$\n\nwhere\n\n$$V_{GS} = V_\\text{in} - V_\\text{out}$$\n\nCombining these gives a transcendental equation for the DC output voltage:\n\n$$\\frac{V_\\text{out}}{R_S} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_\\text{in} - V_\\text{out} - V_{th})^2$$\n\n**Saturation condition:**\n\n$$V_{DS} \\geq V_{GS} - V_{th}$$\n\nSince $V_{DS} = V_{DD} - V_\\text{out}$ and $V_{GS} = V_\\text{in} - V_\\text{out}$:\n\n$$V_{DD} \\geq V_\\text{in} - V_{th}$$\n\nThe circuit also introduces a **DC level shift**:\n\n$$V_\\text{out} \\approx V_\\text{in} - V_{GS}$$\n\nwhere $V_{GS}$ is roughly one threshold voltage plus overdrive.\n\n---\n\n## 2. Small-Signal Analysis\n\nUsing the MOS small-signal model ($g_m$, $r_o$), with the gate driven by $v_\\text{in}$ and the source at $v_\\text{out}$:\n\n$$v_{gs} = v_\\text{in} - v_\\text{out}$$\n\nApplying KCL at the source node:\n\n$$g_m v_{gs} = \\frac{v_\\text{out}}{r_o} + \\frac{v_\\text{out}}{R_S}$$\n\nSubstituting $v_{gs} = v_\\text{in} - v_\\text{out}$:\n\n$$g_m(v_\\text{in} - v_\\text{out}) = v_\\text{out}\\left(\\frac{1}{r_o} + \\frac{1}{R_S}\\right)$$\n\nSolving for the voltage gain:\n\n$$\\boxed{A_v = \\frac{v_\\text{out}}{v_\\text{in}} = \\frac{g_m}{g_m + \\frac{1}{r_o} + \\frac{1}{R_S}} = \\frac{g_m r_o R_S}{g_m r_o R_S + r_o + R_S}}$$\n\n**Practical approximations:**\n- If $r_o \\gg R_S$ and $g_m R_S \\gg 1$:\n  $$A_v \\approx \\frac{g_m R_S}{1 + g_m R_S} \\approx 1$$\n- If $R_S$ is replaced by a current source ($R_S \\to \\infty$):\n  $$A_v \\approx \\frac{g_m}{g_m + \\frac{1}{r_o}} \\approx 1$$\n\nSo the source follower has a **voltage gain close to unity**, with the output **in phase** with the input.\n\n---\n\n## 3. Input and Output Resistance\n\n### Input Resistance\nLooking into the gate, the DC/low-frequency input resistance is ideally:\n\n$$\\boxed{R_\\text{in} = \\infty}$$\n\nIn practice, it is limited by the gate oxide leakage and biasing network (not shown).\n\n### Output Resistance\nTo find $R_\\text{out}$, set $v_\\text{in} = 0$ and apply a test voltage at the source. Then $v_{gs} = -v_\\text{test}$, and the current supplied by the test source is:\n\n$$i_\\text{test} = v_\\text{test}\\left(g_m + \\frac{1}{r_o} + \\frac{1}{R_S}\\right)$$\n\nThus:\n\n$$\\boxed{R_\\text{out} = \\frac{1}{g_m + \\frac{1}{r_o} + \\frac{1}{R_S}} = r_o \\parallel R_S \\parallel \\frac{1}{g_m}}$$\n\nApproximately:\n\n$$\\boxed{R_\\text{out} \\approx \\frac{1}{g_m} \\parallel R_S}$$\n\nThis is a **low output resistance**, which is the main purpose of the source follower.\n\n---\n\n## 4. Body Effect (Important in CMOS)\n\nIf the transistor body (bulk) is grounded while the source is at $V_\\text{out}$ (typical in bulk CMOS), body effect must be included. The body-effect transconductance $g_{mb}$ appears in parallel with $g_m$ in the denominator:\n\n$$\\boxed{A_v = \\frac{g_m}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}}}$$\n\n$$\\boxed{R_\\text{out} = \\frac{1}{g_m + g_{mb} + \\frac{1}{r_o} + \\frac{1}{R_S}}}$$\n\nSince $g_{mb}$ is typically $0.1\\text{–}0.3\\,g_m$, body effect reduces both gain and output resistance.\n\n---\n\n## 5. Frequency Response\n\nThe source follower has favorable high-frequency behavior:\n\n- **Input capacitance is small**: The gate-source capacitance $C_{gs}$ sees a voltage difference of $v_{gs} = v_\\text{in} - v_\\text{out} \\approx 0$ because the gain is near unity. Therefore, the Miller effect is greatly reduced.\n- **Output pole**: At the source node, the resistance is small ($\\approx 1/g_m$), so the pole associated with $R_S$, $C_{gs}$, $C_{sb}$, and load capacitance is at a relatively high frequency.\n\nThis makes the source follower useful as a **wideband buffer**.\n\n---\n\n## 6. Summary of Characteristics\n\n| Parameter | Expression / Value |\n|-----------|------------------|\n| Configuration | Common-drain (source follower) |\n| Voltage gain | $\\approx 1$ (slightly less) |\n| Current gain | High |\n| Power gain | Moderate |\n| Input resistance | Very high ($\\infty$ ideally) |\n| Output resistance | Low ($\\approx 1/g_m$) |\n| Phase | Non-inverting |\n| DC level shift | $V_\\text{out} \\approx V_\\text{in} - V_{GS}$ |\n\n---\n\n## 7. Typical Applications\n\n- **Voltage buffer**: transfers a voltage signal from a high-impedance source to a low-impedance load\n- **Output stage** of operational amplifiers and power amplifiers\n- **Level shifter**: drops a signal by one $V_{GS}$\n- **Impedance matching** between cascaded amplifier stages\n\nIn summary, the source follower trades voltage gain for **impedance transformation**: it presents a high input impedance and a low output impedance, making it ideal for buffering applications.",
        "format": "markdown",
        "sha256": "1f7ab847b5f7176287bdea5081e4d3125625053f7d1d29c966086c0da4b2c148"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain, including the standard gm·RS/(1 + gm·RS) form as an approximation. The added output-resistance and body-effect analyses are also consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1261,
        "output_tokens": 4656,
        "total_tokens": 5917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1261,
        "output_tokens": 4656,
        "total_tokens": 5917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Common-Drain (Source-Follower) Amplifier\n\nThe circuit shown is a **common-drain amplifier**, commonly called a **source follower**.\n\n## 1. Circuit Identification\n- Transistor $M_1$ is an **NMOS** device.\n- Its **drain** is tied directly to the supply $V_{DD}$ (AC ground).\n- Its **source** is connected to ground through resistor $R_S$.\n- The input $V_{in}$ drives the **gate**, and the output $V_{out}$ is taken at the **source**.\n- Since the drain is common to both input and output (AC ground), this is the **common-drain** configuration.\n\nThe output “follows” the input with a DC level shift of approximately $V_{GS}$, hence the name source follower.\n\n---\n\n## 2. DC Operating Point\n\nAt DC, the gate voltage is the DC bias of the input, $V_{IN,Q}$. The source voltage is:\n\n$$V_{OUT,Q} = V_S = I_D R_S$$\n\nThe gate-source voltage is:\n\n$$V_{GS} = V_{IN,Q} - V_S = V_{IN,Q} - I_D R_S$$\n\nAssuming $M_1$ operates in saturation:\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS} - V_{TH})^2$$\n\nSubstituting $V_{GS}$:\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{IN,Q} - I_D R_S - V_{TH})^2$$\n\nThis quadratic equation is solved to find the quiescent drain current $I_D$, from which $V_{OUT,Q} = I_D R_S$ is obtained.\n\n**Saturation condition:**\n\n$$V_{DS} \\geq V_{GS} - V_{TH}$$\n\nSince $V_{DS} = V_{DD} - V_S$:\n\n$$V_{DD} - V_S \\geq V_{IN,Q} - V_S - V_{TH} \\implies V_{DD} \\geq V_{IN,Q} - V_{TH}$$\n\n---\n\n## 3. Small-Signal Analysis\n\nThe small-signal equivalent includes:\n- Gate current ≈ 0\n- Transconductance current source $g_m v_{gs}$ from drain to source\n- Output resistance $r_o$ of the transistor\n- Source resistor $R_S$\n\nwhere:\n\n$$v_{gs} = v_{in} - v_{out}$$\n\n### Voltage Gain\n\nApplying KCL at the source node:\n\n$$g_m v_{gs} = \\frac{v_{out}}{R_S} + \\frac{v_{out}}{r_o}$$\n\n$$g_m(v_{in} - v_{out}) = v_{out}\\left(\\frac{1}{R_S} + \\frac{1}{r_o}\\right)$$\n\nSolving for $A_v = v_{out}/v_{in}$:\n\n$$\\boxed{A_v = \\frac{g_m(R_S \\parallel r_o)}{1 + g_m(R_S \\parallel r_o)}}$$\n\nIf $r_o \\gg R_S$, this simplifies to:\n\n$$\\boxed{A_v \\approx \\frac{g_m R_S}{1 + g_m R_S}}$$\n\nThe gain is **positive** and **less than unity** (but close to 1 when $g_m R_S \\gg 1$). The output is in phase with the input.\n\n### Input Resistance\n\nAt low and mid-band frequencies, looking into the gate:\n\n$$\\boxed{R_{in} \\approx \\infty}$$\n\n(Practically limited by gate leakage and capacitances at high frequencies.)\n\n### Output Resistance\n\nTo find $R_{out}$, set $v_{in} = 0$ (gate grounded) and apply a test voltage at the source. Then $v_{gs} = -v_{test}$, and the current drawn is:\n\n$$i_{test} = g_m v_{test} + \\frac{v_{test}}{r_o} + \\frac{v_{test}}{R_S}$$\n\nThus:\n\n$$\\boxed{R_{out} = \\frac{1}{g_m} \\parallel r_o \\parallel R_S}$$\n\nIf $r_o \\gg R_S$ and $g_m R_S \\gg 1$:\n\n$$\\boxed{R_{out} \\approx \\frac{1}{g_m}}$$\n\nThis is a key feature: the source follower provides a **low output impedance**, approximately $1/g_m$.\n\n---\n\n## 4. Body Effect (Important Practical Consideration)\n\nIf the body/substrate of $M_1$ is not tied to the source (e.g., NMOS in a p-substrate with body grounded), the body effect introduces a body-transconductance $g_{mb}$. The effective transconductance becomes $g_m + g_{mb}$:\n\n$$\\boxed{A_v = \\frac{g_m(R_S \\parallel r_o)}{1 + (g_m + g_{mb})(R_S \\parallel r_o)}}$$\n\n$$\\boxed{R_{out} \\approx \\frac{1}{g_m + g_{mb}}}$$\n\nThe body effect **reduces the voltage gain** and **lowers the output impedance** further.\n\n---\n\n## 5. Key Characteristics & Applications\n\n| Characteristic | Behavior |\n|---|---|\n| Voltage gain | Slightly less than 1, positive |\n| Input resistance | Very high (ideally infinite) |\n| Output resistance | Low, ≈ $1/g_m$ |\n| Phase shift | $0^\\circ$ (non-inverting) |\n| Level shift | Output is shifted down by $V_{GS}$ |\n\n**Typical uses:**\n- **Voltage buffer**: transfers a voltage from a high-impedance source to a low-impedance load.\n- **Level shifter**: drops the signal by $V_{GS}$.\n- **Output stage**: drives capacitive or low-resistance loads.\n\n---\n\n## Summary\n\nThe circuit is an **NMOS source follower** (common-drain amplifier). It provides **unity-gain voltage buffering** with **high input impedance**, **low output impedance** ($\\approx 1/g_m$), and **non-inverting** signal transfer. Its main limitations are the less-than-unity gain and the DC level shift $V_{GS}$, which is further affected by the body effect in integrated-circuit implementations.",
        "format": "markdown",
        "sha256": "9437f908e89c9f74f2f577f81b6865a2bf19944dad5c16b83e373b7c1c5c9860"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required approximation gmRS/(1 + gmRS). The additional output-resistance and body-effect analysis is consistent.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 67,
        "input_tokens": 1253,
        "output_tokens": 4838,
        "total_tokens": 6091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 67,
        "input_tokens": 1253,
        "output_tokens": 4838,
        "total_tokens": 6091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑drain (CD) stage**, also called a **source follower**.\n\n\\[\nM_1:\\ \\text{NMOS (enhancement mode)},\\qquad \n\\text{drain tied to }V_{DD},\\quad \n\\text{source tied to }R_S\\rightarrow\\text{GND}\n\\]\n\nThe input is applied at the gate, and the output is taken at the source. The stage provides a voltage gain close to unity, a high input resistance, and a relatively low output resistance — it is essentially a **voltage buffer**.\n\n---\n\n## 1. DC analysis\n\nAssume long‑channel square‑law behavior in saturation and neglect channel‑length modulation (\\(\\lambda\\approx0\\)):\n\n\\[\nI_D=\\frac{1}{2}K_n\\bigl(V_{GS}-V_{TH}\\bigr)^2,\n\\qquad K_n=\\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nFor this circuit:\n\n\\[\nV_{GS}=V_{in}-V_{out},\\qquad I_D=\\frac{V_{out}}{R_S}\n\\]\n\nSo the DC transfer relation is\n\n\\[\n\\boxed{\\frac{V_{out}}{R_S}=\\frac{1}{2}K_n\\bigl(V_{in}-V_{out}-V_{TH}\\bigr)^2}\n\\]\n\nSolving for the overdrive voltage \\(V_{OV}=V_{GS}-V_{TH}\\):\n\n\\[\nV_{in}-V_{TH}=V_{OV}+\\frac{1}{2}K_nR_S V_{OV}^2\n\\]\n\n\\[\n\\boxed{\nV_{OV}=\n\\frac{-1+\\sqrt{1+2K_nR_S(V_{in}-V_{TH})}}{K_nR_S}\n}\n\\]\n\nand therefore\n\n\\[\n\\boxed{V_{out}=V_{in}-V_{TH}-V_{OV}}\n\\]\n\nThe output is the input shifted down by roughly one threshold plus overdrive voltage.\n\n### Saturation condition\n\n\\[\nV_{DS}\\ge V_{GS}-V_{TH}\n\\]\n\nHere \\(V_{DS}=V_{DD}-V_{out}\\), so\n\n\\[\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH}\n\\]\n\n\\[\n\\boxed{V_{in}\\le V_{DD}+V_{TH}}\n\\]\n\nThus, for normal rail‑to‑rail inputs (\\(V_{in}\\le V_{DD}\\)), the transistor stays in saturation.\n\n### Output swing limits\n\n* **Lower limit:** \\(M_1\\) turns off when \\(V_{GS}<V_{TH}\\). With \\(V_{out}\\approx0\\), this means \\(V_{in}\\lesssim V_{TH}\\).\n* **Upper limit:** With \\(V_{in}\\le V_{DD}\\),\n  \\[\n  V_{out,\\max}\\approx V_{DD}-V_{GS}=V_{DD}-V_{TH}-V_{OV}\n  \\]\n  The follower cannot pull the output all the way to \\(V_{DD}\\).\n\n---\n\n## 2. Small‑signal analysis\n\nLow‑frequency small‑signal model:\n\n* \\(v_{gs}=v_{in}-v_{out}\\)\n* The drain is an AC ground.\n* Transconductance current source \\(g_m v_{gs}\\) flows from drain to source.\n* Output resistance \\(r_o\\) appears between drain and source.\n* If the body/substrate is grounded, the body effect adds a term \\(g_{mb}v_{bs}\\), where \\(v_{bs}=-v_{out}\\).\n\n### Voltage gain\n\nNeglecting \\(r_o\\) and body effect first:\n\n\\[\ng_m(v_{in}-v_{out})=\\frac{v_{out}}{R_S}\n\\]\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_mR_S}{1+g_mR_S}}\n\\]\n\nIf \\(g_mR_S\\gg1\\), \\(A_v\\approx1\\).\n\nIncluding body effect (\\(g_{mb}\\)) and \\(r_o\\):\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m(r_o\\parallel R_S)}\n{1+(g_m+g_{mb})(r_o\\parallel R_S)}\n}\n\\]\n\nBody effect reduces the gain and raises the output resistance because \\(g_{mb}\\) appears in the denominator.\n\n### Input resistance\n\nAt low frequencies, the gate draws no DC current:\n\n\\[\n\\boxed{R_{in}\\approx\\infty}\n\\]\n\nIn practice it is limited by gate‑oxide leakage, ESD structures, and layout parasitics.\n\n### Output resistance\n\nLooking back into the output node:\n\n\\[\n\\boxed{\nR_{out}=R_S\\parallel r_o\\parallel \\frac{1}{g_m+g_{mb}}\n}\n\\]\n\nIf body effect is negligible,\n\n\\[\n\\boxed{R_{out}\\approx R_S\\parallel \\frac{1}{g_m}\\parallel r_o}\n\\]\n\nFor a well‑designed follower, \\(1/g_m\\) dominates and the stage presents a low output impedance.\n\n---\n\n## 3. Frequency response\n\nThe source follower has two attractive high‑frequency properties:\n\n1. **Small input capacitance:** Because the gain is near unity, the Miller multiplication of \\(C_{gs}\\) is small:\n   \\[\n   C_{in}\\approx C_{gd}+C_{gs}(1-A_v)\n   \\]\n   Since \\(A_v\\approx1\\), the \\(C_{gs}\\) term is small.\n\n2. **Low output resistance:** The dominant output pole is set by the source‑node resistance and the total capacitance at the output:\n   \\[\n   f_{p,out}\\approx\\frac{1}{2\\pi R_{out}(C_L+C_{sb}+C_{gs})}\n   \\]\n\nThere is also a left‑half‑plane zero at roughly \\(g_m/C_{gs}\\). For many practical cases the source follower behaves like a wideband buffer with a dominant pole at the source node.\n\n---\n\n## 4. Summary of characteristics\n\n| Quantity | Expression (simplest case) | Comment |\n|---|---|---|\n| Topology | Common drain / source follower | Voltage buffer |\n| DC gain | \\(V_{out}\\approx V_{in}-V_{GS}\\) | Level shift of \\(\\sim V_{TH}+V_{OV}\\) |\n| Small‑signal gain | \\(A_v\\approx \\dfrac{g_mR_S}{1+g_mR_S}\\) | \\(\\lesssim 1\\) |\n| Input resistance | Very high (\\(\\infty\\) ideally) | Easy to drive |\n| Output resistance | \\(\\approx R_S\\parallel 1/g_m\\) | Low; can drive heavier loads |\n| Body effect | Reduces \\(A_v\\), raises \\(R_{out}\\) | Present if bulk is not tied to source |\n| Bandwidth | Wide | Low Miller input cap, low output \\(R\\) |\n\n---\n\n## 5. Practical note\n\nA resistive source follower like this is simple but has limited output swing. In many IC designs, \\(R_S\\) is replaced by a **current source** (active load). That improves:\n\n* Output swing (the current source can drop very little voltage),\n* Gain (closer to unity),\n* Linearity (less dependence of \\(g_m\\) on signal).\n\nOverall, this circuit is the classic **NMOS source follower**: a unity‑gain voltage buffer with high input impedance and low output impedance.",
        "format": "markdown",
        "sha256": "cdae0f79cc6562ef7aa50a5101d18d2975ca795eb556c9f51e3457cdbe63ad34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the required positive, less-than-unity gain expression. The ancillary output-resistance discussion does not change the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1253,
        "output_tokens": 10290,
        "total_tokens": 11543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1253,
        "output_tokens": 10290,
        "total_tokens": 11543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑gate (CG) amplifier** with a resistive load.\n\n- **Transistor:** \\(M_1\\) is an **NMOS** (source arrow points into the channel).\n- **Gate:** tied to \\(V_{DD}\\), so it is at a fixed DC voltage and is an AC ground.\n- **Input:** applied at the **source** terminal, \\(V_{in}\\).\n- **Output:** taken at the **drain** terminal, \\(V_{out}\\), through drain resistor \\(R_D\\).\n\n---\n\n## 1. DC / large-signal analysis\n\nDefine:\n\n\\[\nV_G = V_{DD}, \\qquad V_S = V_{in}, \\qquad V_D = V_{out}\n\\]\n\n\\[\nV_{GS} = V_G - V_S = V_{DD} - V_{in}\n\\]\n\n\\[\nV_{DS} = V_D - V_S = V_{out} - V_{in}\n\\]\n\nThe drain current is set by the MOS characteristic.\n\n### Saturation (active) region\n\nIf \\(M_1\\) is in saturation:\n\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{th})^2\n      = \\frac{1}{2}K(V_{DD}-V_{in}-V_{th})^2\n\\]\n\nwith \\(K=\\mu_n C_{ox}(W/L)\\). The output voltage is then\n\n\\[\n\\boxed{V_{out} = V_{DD} - R_D I_D\n      = V_{DD} - \\frac{1}{2}K R_D (V_{DD}-V_{in}-V_{th})^2}\n\\]\n\n### Region boundaries\n\n| Region | Condition |\n|---|---|\n| **Cutoff** | \\(V_{GS}<V_{th}\\) \\(\\Rightarrow\\) \\(V_{in}>V_{DD}-V_{th}\\). Then \\(I_D\\approx0\\) and \\(V_{out}\\approx V_{DD}\\). |\n| **Saturation** | \\(V_{GS}>V_{th}\\) and \\(V_{DS}\\ge V_{GS}-V_{th}\\). The second condition becomes \\(V_{out}\\ge V_{DD}-V_{th}\\). |\n| **Triode** | \\(V_{DS}<V_{GS}-V_{th}\\). The transistor behaves like a voltage-controlled resistor. |\n\nSo, for the transistor to amplify in saturation, \\(V_{in}\\) must be low enough that \\(V_{DD}-V_{in}>V_{th}\\), but high enough that \\(V_{out}\\) has not collapsed below \\(V_{DD}-V_{th}\\).\n\n---\n\n## 2. Small-signal analysis\n\nAssume \\(M_1\\) is biased in saturation. Let\n\n\\[\ng_m = K(V_{DD}-V_{in}-V_{th}) = \\frac{\\partial I_D}{\\partial V_{GS}}\n\\]\n\nand \\(r_o\\) be the transistor output resistance, if channel-length modulation is included.\n\nFor small signals, the gate is grounded, so:\n\n\\[\nv_{gs} = 0 - v_{in} = -v_{in}\n\\]\n\nThe drain current variation is\n\n\\[\ni_d = g_m v_{gs} = -g_m v_{in}\n\\]\n\nThe output voltage is the voltage drop across \\(R_D\\parallel r_o\\):\n\n\\[\nv_{out} = -i_d (R_D \\parallel r_o)\n        = g_m (R_D \\parallel r_o) v_{in}\n\\]\n\nTherefore the **small-signal voltage gain** is\n\n\\[\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = g_m (R_D \\parallel r_o)}\n\\]\n\nIf channel-length modulation is neglected (\\(r_o \\to \\infty\\)):\n\n\\[\n\\boxed{A_v \\approx g_m R_D}\n\\]\n\nThe gain is **positive**, so the common-gate stage is **non-inverting**.\n\n### Input resistance\n\nLooking into the source:\n\n\\[\n\\boxed{R_{in} \\approx \\frac{1}{g_m}}\n\\]\n\nMore exactly, with the drain loaded by \\(R_D\\),\n\n\\[\nR_{in} = \\frac{R_D + r_o}{1+g_m r_o}\n\\]\n\nwhich reduces to \\(\\approx 1/g_m\\) when \\(r_o \\gg R_D\\).\n\n### Output resistance\n\nWith the input source set to zero (source at AC ground):\n\n\\[\n\\boxed{R_{out} \\approx R_D \\parallel r_o}\n\\]\n\nIf \\(r_o\\) is very large, \\(R_{out}\\approx R_D\\).\n\n---\n\n## 3. Key properties summary\n\n| Quantity | Expression / Value |\n|---|---|\n| Configuration | Common-gate amplifier |\n| Voltage gain | \\(A_v \\approx g_m R_D\\) (non-inverting) |\n| Input resistance | \\(R_{in}\\approx 1/g_m\\) (low) |\n| Output resistance | \\(R_{out}\\approx R_D \\parallel r_o\\) |\n| Current gain | \\(\\approx 1\\) |\n| Miller effect | Small, because gate is grounded |\n| Useful role | Current buffer, wideband voltage amplifier, impedance transformer |\n\nIn short, this circuit takes a voltage at the source, converts it to a drain current via the transistor’s transconductance \\(g_m\\), and converts that current back to a voltage across \\(R_D\\). The result is a non-inverting voltage gain with a relatively low input resistance at the source terminal.",
        "format": "markdown",
        "sha256": "83fcae3343848e40ba1c32f5b57e54f270d6db3e546ee0ab92e39afcc25283b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, source input, AC-grounded gate, non-inverting gain, and low input resistance. The gain and input-resistance approximations match the golden solution; the additional bias and output-resistance discussion is consistent.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1222,
        "output_tokens": 6609,
        "total_tokens": 7831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1222,
        "output_tokens": 6609,
        "total_tokens": 7831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-transistor common-gate (CG) amplifier**.\n\n- The **gate** of \\(M_1\\) is tied to the supply \\(V_{DD}\\), so it is an AC ground.\n- The **input** signal is applied to the **source** of \\(M_1\\).\n- The **output** is taken from the **drain** of \\(M_1\\), across the load resistor \\(R_D\\).\n\nI will assume \\(M_1\\) is an **n-channel enhancement-mode MOSFET**.\n\n---\n\n## 1. DC / large-signal analysis\n\nAt DC:\n\n\\[\nV_G = V_{DD}, \\qquad V_S = V_{in}, \\qquad V_D = V_{out}\n\\]\n\n\\[\nV_{GS} = V_G - V_S = V_{DD} - V_{in}\n\\]\n\nFor the transistor to conduct,\n\n\\[\nV_{GS} > V_{th}\n\\quad\\Rightarrow\\quad\nV_{in} < V_{DD} - V_{th}\n\\]\n\nIf \\(M_1\\) is in **saturation**, the drain current is\n\n\\[\nI_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\bigl(V_{DD}-V_{in}-V_{th}\\bigr)^2\n\\]\n\nKVL around the drain resistor gives the output voltage:\n\n\\[\nV_{out} = V_{DD} - I_D R_D\n\\]\n\n\\[\n\\boxed{\nV_{out} = V_{DD} - \\frac{1}{2}k R_D\\bigl(V_{DD}-V_{in}-V_{th}\\bigr)^2\n}\n\\qquad \\text{where } k=\\mu_n C_{ox}\\frac{W}{L}\n\\]\n\n### Region of operation\n\nThe saturation condition is\n\n\\[\nV_{DS} \\ge V_{GS}-V_{th}\n\\]\n\n\\[\nV_{out}-V_{in} \\ge (V_{DD}-V_{in})-V_{th}\n\\]\n\n\\[\n\\boxed{V_{out} \\ge V_{DD}-V_{th}}\n\\]\n\nSo the maximum voltage drop allowed across \\(R_D\\) is approximately \\(V_{th}\\):\n\n\\[\nI_D R_D \\le V_{th}\n\\]\n\nThis means the usable output swing is limited to roughly\n\n\\[\nV_{DD}-V_{th} \\le V_{out} \\le V_{DD}\n\\]\n\nIf \\(V_{in}\\) is too low, \\(V_{out}\\) falls below \\(V_{DD}-V_{th}\\) and the transistor enters the **triode/linear** region, where the gain drops.\n\n---\n\n## 2. Small-signal analysis\n\nAt the operating point:\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n= k\\bigl(V_{DD}-V_{in,Q}-V_{th}\\bigr)\n= \\sqrt{2kI_D}\n\\]\n\n\\[\nr_o = \\frac{1}{\\lambda I_D}\n\\]\n\nThe small-signal equivalent has the gate grounded, the source driven by \\(v_{in}\\), and the drain loaded by \\(R_D\\).\n\n### Voltage gain\n\nFor an ideal voltage source at the source (\\(R_S=0\\)):\n\n\\[\n\\boxed{\nA_v = \\frac{v_{out}}{v_{in}}\n= (g_m + \\frac{1}{r_o})(r_o \\parallel R_D)\n= \\frac{(1+g_m r_o)R_D}{r_o+R_D}\n}\n\\]\n\nUsually \\(r_o \\gg R_D\\), so\n\n\\[\n\\boxed{A_v \\approx +g_m R_D}\n\\]\n\nThe gain is **positive** (non-inverting): increasing \\(V_{in}\\) reduces \\(V_{GS}\\), which reduces \\(I_D\\), so \\(V_{out}\\) rises.\n\nIf the input source has finite resistance \\(R_S\\), the gain becomes approximately\n\n\\[\nA_v \\approx \\frac{g_m R_D}{1+g_m R_S}\n\\]\n\n### Input resistance\n\nLooking into the source terminal:\n\n\\[\n\\boxed{\nR_{in} = \\frac{r_o+R_D}{1+g_m r_o}\n\\approx \\frac{1}{g_m}\n}\n\\]\n\nThis is a key feature of the common-gate stage: **very low input resistance**.\n\nIf body effect is present and the bulk is at AC ground, replace \\(g_m\\) by \\(g_m+g_{mb}\\):\n\n\\[\nR_{in} \\approx \\frac{1}{g_m+g_{mb}}\n\\]\n\n### Output resistance\n\nWith the source driven by an ideal voltage source:\n\n\\[\n\\boxed{R_{out} \\approx R_D \\parallel r_o}\n\\]\n\nIf \\(r_o \\gg R_D\\), then \\(R_{out}\\approx R_D\\).\n\nWith a finite source resistance \\(R_S\\), the output resistance is larger:\n\n\\[\nR_{out} \\approx R_D \\parallel \\bigl[r_o(1+g_m R_S)+R_S\\bigr]\n\\]\n\n---\n\n## 3. Current gain\n\nA common-gate stage is essentially a **current buffer**. The current entering the source is conveyed to the drain with a current gain of approximately\n\n\\[\n\\boxed{A_i \\approx 1}\n\\]\n\n(The gate current is zero for a MOSFET.)\n\n---\n\n## 4. Frequency response\n\nBecause the gate is AC-grounded, the gate-drain capacitance \\(C_{gd}\\) does **not** suffer from Miller multiplication. The dominant poles are roughly:\n\n- Input node (source): set by \\(C_{gs}\\) and \\(R_{in}\\approx 1/g_m\\).\n- Output node (drain): set by \\(C_{gd}+C_{db}\\) and \\(R_{out}\\approx R_D\\parallel r_o\\).\n\nTherefore, the common-gate stage can achieve **wider bandwidth** than a comparable common-source stage.\n\n---\n\n## 5. Practical notes and limitations\n\n| Feature | Common-gate behavior |\n|---|---|\n| Voltage gain | \\(A_v \\approx +g_m R_D\\), non-inverting |\n| Input resistance | Low, \\(\\approx 1/g_m\\) |\n| Output resistance | \\(\\approx R_D \\parallel r_o\\) |\n| Current gain | \\(\\approx 1\\) |\n| Output swing | Limited to about \\(V_{th}\\) below \\(V_{DD}\\) because the gate is at \\(V_{DD}\\) |\n| Bandwidth | Good; no Miller effect on \\(C_{gd}\\) |\n\n- Since the gate is tied directly to \\(V_{DD}\\), the transistor is always “close” to cutoff for a high input DC level. To use this as a voltage amplifier, the DC level of \\(V_{in}\\) must be chosen carefully to keep \\(M_1\\) in saturation.\n- In practice, a bypass capacitor from the gate to ground is often added to ensure the gate is a solid AC ground.\n- This circuit is most naturally used as a **current buffer** or a **wideband non-inverting gain stage**, rather than a high-swing voltage amplifier.\n\nIf \\(M_1\\) were a PMOS or the terminal connections were interpreted differently, the polarities and inequalities would reverse, but the topology is most naturally analyzed as the common-gate stage described above.",
        "format": "markdown",
        "sha256": "fdc0c0ca75d6fcd72018b971a8f3c611d9fc7c74d469d833238cdbf1138e6305"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, the low input resistance (approximately 1/gm), and the positive gain (approximately gm(RD || ro)). The additional bias and small-signal analysis is consistent with the assumed NMOS model.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 15219,
        "total_tokens": 16447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13653,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 15219,
        "total_tokens": 16447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13653,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Common-Source NMOS Amplifier\n\nThe circuit shown is a **common-source (CS) amplifier**, the most basic MOSFET voltage amplifier. It consists of an NMOS transistor $M_1$ with its **source grounded**, **gate driven by $V_{in}$**, and **drain connected to $V_{DD}$ through load resistor $R_D$**. The output is taken at the drain.\n\n---\n\n## 1. DC Operating Point (Bias)\n\nFor proper amplification, $M_1$ must be biased in the **saturation region**.\n\n**Conditions for saturation:**\n$$V_{GS} > V_{TH} \\quad \\text{and} \\quad V_{DS} \\geq V_{GS} - V_{TH}$$\n\nSince the source is grounded:\n- $V_{GS} = V_{in}$ (DC bias component)\n- $V_{DS} = V_{out}$\n\nThe drain current is:\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS} - V_{TH})^2 = \\frac{1}{2}k_n(V_{in} - V_{TH})^2$$\n\nThe output DC voltage is:\n$$\\boxed{V_{out} = V_{DD} - I_D R_D = V_{DD} - \\frac{1}{2}k_n(V_{in} - V_{TH})^2 R_D}$$\n\nwhere $k_n = \\mu_n C_{ox}(W/L)$.\n\n---\n\n## 2. Small-Signal Voltage Gain\n\nUsing the small-signal model:\n- Gate-source voltage variation: $v_{gs} = v_{in}$\n- Drain current variation: $i_d = g_m v_{gs}$\n- Output resistance of transistor: $r_o$ (often neglected)\n\nThe output voltage is:\n$$v_{out} = -g_m v_{gs}(R_D \\parallel r_o)$$\n\nTherefore, the **voltage gain** is:\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m(R_D \\parallel r_o)}$$\n\nIf channel-length modulation is ignored ($r_o \\to \\infty$):\n$$\\boxed{A_v \\approx -g_m R_D}$$\n\n**Key observations:**\n- The **negative sign** indicates a **180° phase inversion** between input and output.\n- Gain increases with larger $g_m$ or larger $R_D$.\n- $g_m = \\mu_n C_{ox}\\frac{W}{L}(V_{GS} - V_{TH}) = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}$\n\n---\n\n## 3. Input and Output Impedances\n\n- **Input resistance:** Ideally infinite\n  $$\\boxed{R_{in} = \\infty}$$\n  (In practice, limited by gate oxide leakage.)\n\n- **Output resistance:**\n  $$\\boxed{R_{out} = R_D \\parallel r_o \\approx R_D}$$\n\n---\n\n## 4. Regions of Operation (Large-Signal)\n\n| Region | Condition | Behavior |\n|--------|-----------|----------|\n| **Cutoff** | $V_{in} < V_{TH}$ | $I_D \\approx 0$, $V_{out} \\approx V_{DD}$ |\n| **Saturation** | $V_{in} > V_{TH}$ and $V_{out} \\geq V_{in} - V_{TH}$ | Amplification region, $I_D$ depends quadratically on $V_{in}$ |\n| **Triode/Linear** | $V_{out} < V_{in} - V_{TH}$ | Transistor acts like a voltage-controlled resistor; gain drops |\n\nFor amplification, the transistor must remain in **saturation** over the entire input signal swing.\n\n---\n\n## 5. Key Design Trade-offs\n\n1. **Higher gain** requires larger $R_D$ or larger $g_m$, but large $R_D$ reduces voltage headroom and limits output swing.\n2. **Output swing** is bounded between approximately $V_{DD}$ (transistor cutoff) and $V_{in} - V_{TH}$ (edge of saturation).\n3. In integrated circuits, $R_D$ is often replaced by a **current source (active load)** to achieve higher gain without large voltage drops.\n\n---\n\n## Summary\n\nThis is the fundamental **common-source amplifier**:\n- **High voltage gain** with phase inversion\n- **Infinite input resistance**\n- **Moderate output resistance** ($\\approx R_D$)\n- Used as a basic gain stage in analog circuits",
        "format": "markdown",
        "sha256": "8f52b851cd5c9deaa687178bee5e1cc962d2770f10a2611b6ea27f1a934cc792"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied at M1's source while its gate is AC-grounded, making this a common-gate stage. Its common-source analysis therefore gives the wrong input resistance and gain sign; the expected gain is non-inverting and Rin is approximately 1/gm.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 2597,
        "total_tokens": 3825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1228,
        "output_tokens": 2597,
        "total_tokens": 3825,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Common-Gate Amplifier\n\nThe circuit shown is a **common-gate (CG) amplifier**. The input signal $V_{in}$ is AC-coupled through $C_1$ to the **source** of MOSFET $M_1$, the **gate** is biased at a DC voltage $V_b$ (AC ground), and the **drain** produces the output voltage $V_{out}$ across load resistor $R_D$.\n\n---\n\n## 1. DC Operating Point\n\nAssuming $M_1$ is an NMOS transistor operating in **saturation**:\n\n- Gate voltage: $V_G = V_b$\n- Source voltage: $V_S = 0\\,\\text{V}$ (DC, since $C_1$ blocks DC)\n- Gate-source voltage: $V_{GS} = V_b$\n- Drain current:\n  \n  $$I_D = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)(V_b - V_{TH})^2$$\n\n- Output DC voltage:\n  \n  $$V_{out,DC} = V_{DD} - I_D R_D$$\n\n### Saturation condition:\nThe transistor remains in saturation if:\n\n$$V_{DS} > V_{GS} - V_{TH}$$\n\n$$\\Rightarrow V_{out} > V_b - V_{TH}$$\n\n---\n\n## 2. Small-Signal Voltage Gain\n\nFor small-signal analysis:\n- $V_{DD}$ and $V_b$ become AC grounds.\n- $v_{gs} = -v_{in}$ (gate grounded, source at $v_{in}$)\n\nIncluding the transistor output resistance $r_o$, the voltage gain is:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{R_D(1 + g_m r_o)}{R_D + r_o}$$\n\nIf $r_o \\gg R_D$, this simplifies to:\n\n$$\\boxed{A_v \\approx g_m R_D}$$\n\n**Key property:** The common-gate amplifier is **non-inverting** — $v_{out}$ is in phase with $v_{in}$.\n\n---\n\n## 3. Input and Output Resistance\n\n### Input resistance (looking into the source):\n\n$$R_{in} = \\frac{R_D + r_o}{1 + g_m r_o}$$\n\nFor $r_o \\gg R_D$ and $g_m r_o \\gg 1$:\n\n$$\\boxed{R_{in} \\approx \\frac{1}{g_m}}$$\n\nThis relatively low input resistance is a hallmark of the common-gate topology.\n\n### Output resistance (looking into the drain):\n\n$$\\boxed{R_{out} \\approx R_D \\parallel r_o}$$\n\n---\n\n## 4. Frequency Response\n\n### Low-frequency behavior (due to $C_1$):\n$C_1$ forms a high-pass network with the input resistance $R_{in} \\approx 1/g_m$.\n\nThe lower cutoff frequency is approximately:\n\n$$\\boxed{f_L \\approx \\frac{g_m}{2\\pi C_1}}$$\n\n### High-frequency behavior:\nBecause the gate is AC-grounded, there is **no Miller multiplication** of $C_{GD}$. The dominant high-frequency poles are approximately:\n\n- **Input pole:**\n  \n  $$f_{p,in} \\approx \\frac{1}{2\\pi (C_{GS} + C_{SB})R_{in}} \\approx \\frac{g_m}{2\\pi (C_{GS} + C_{SB})}$$\n\n- **Output pole:**\n  \n  $$f_{p,out} \\approx \\frac{1}{2\\pi (C_{GD} + C_{DB} + C_L)R_{out}}$$\n\nwhere $C_L$ is any external load capacitance.\n\n---\n\n## 5. Summary of Characteristics\n\n| Parameter | Expression |\n|-----------|------------|\n| Voltage gain | $A_v \\approx g_m R_D$ |\n| Input resistance | $R_{in} \\approx 1/g_m$ |\n| Output resistance | $R_{out} \\approx R_D \\parallel r_o$ |\n| Phase | Non-inverting |\n| Miller effect | Negligible |\n\n## 6. Typical Applications\n\nThe common-gate amplifier is useful when:\n- A **low input impedance** is desired (e.g., matching to $50\\,\\Omega$ systems)\n- **High-frequency operation** is needed (minimal Miller effect)\n- It is combined with a common-source stage to form a **cascode amplifier**, which provides high gain and good frequency response.",
        "format": "markdown",
        "sha256": "14328e11581dab760f812162a3cdd2f6d1350c77eaf6eccca1d4cec61c641a08"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the common-gate topology but misses that the source is directly shorted to ground, so the input is shorted and the ideal gain is zero. The stated common-gate gain earns 1 under the full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1899,
        "output_tokens": 5973,
        "total_tokens": 7872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1899,
        "output_tokens": 5973,
        "total_tokens": 7872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑gate (CG) MOS stage**.\n\n- The **gate** is held at a fixed DC bias \\(V_b\\) (AC ground).\n- The **signal** is injected at the **source** through the coupling capacitor \\(C_1\\).\n- The **output** is taken at the **drain** across \\(R_D\\).\n- \\(C_1\\) blocks DC but is assumed a short at the signal frequencies of interest.\n\nBelow is the usual small/signal and DC analysis, assuming \\(M_1\\) is an **n‑channel MOSFET**.\n\n---\n\n## 1. DC operating point\n\nAt DC, \\(C_1\\) is open, so \\(V_{in}\\) does not affect the DC bias.\n\nSince the source is tied to ground:\n\n\\[\nV_S = 0,\\qquad V_G = V_b\n\\]\n\n\\[\nV_{GS} = V_b\n\\]\n\nIf \\(M_1\\) operates in saturation,\n\n\\[\nI_D = \\frac{1}{2}k_n(V_b - V_{TH})^2\\bigl(1+\\lambda V_{DS}\\bigr)\n\\]\n\nwhere\n\n\\[\nk_n = \\mu_n C_{ox}\\frac{W}{L}\n\\]\n\nThe drain quiescent voltage is\n\n\\[\nV_{OUT,Q} = V_{DD} - I_D R_D\n\\]\n\nand\n\n\\[\nV_{DS,Q} = V_{OUT,Q} = V_{DD} - I_D R_D\n\\]\n\nSaturation requires\n\n\\[\nV_{DS} \\ge V_{GS} - V_{TH}\n\\]\n\n\\[\nV_{DD} - I_D R_D \\ge V_b - V_{TH}\n\\]\n\nSmall‑signal parameters at the operating point:\n\n\\[\ng_m = k_n(V_b - V_{TH}) = \\sqrt{2k_n I_D}\n\\]\n\n\\[\nr_o = \\frac{1}{\\lambda I_D}\n\\]\n\n---\n\n## 2. Small‑signal analysis\n\nFor AC, \\(V_{DD}\\) and \\(V_b\\) are ground, and \\(C_1\\) is a short.\n\nLet \\(v_s\\) be the small signal at the source. Since the gate is AC ground,\n\n\\[\nv_{gs} = -v_s\n\\]\n\nKCL at the output node gives\n\n\\[\n\\frac{v_o}{R_D} + \\frac{v_o - v_s}{r_o} - g_m v_s = 0\n\\]\n\nSolving,\n\n\\[\n\\boxed{\nA_v = \\frac{v_o}{v_s}\n      = \\frac{g_m + \\frac{1}{r_o}}{\\frac{1}{R_D}+\\frac{1}{r_o}}\n      \\approx g_m R_D\n}\n\\qquad (r_o \\gg R_D)\n\\]\n\nThe gain is **positive/non‑inverting**.\n\n### Input resistance (looking into the source)\n\n\\[\n\\boxed{\nR_{in} \\approx \\frac{1}{g_m}\n}\n\\]\n\nMore exactly,\n\n\\[\nR_{in} = \\frac{1+\\frac{R_D}{r_o}}{g_m+\\frac{1}{r_o}}\n\\]\n\nThis low input resistance is characteristic of a common‑gate stage.\n\n### Output resistance (looking into the drain)\n\n\\[\n\\boxed{\nR_{out} = R_D \\parallel r_o \\approx R_D\n}\n\\]\n\n---\n\n## 3. Frequency response\n\nThe main high‑pass corner comes from \\(C_1\\) and the resistance it sees:\n\n\\[\n\\boxed{\nf_L \\approx \\frac{1}{2\\pi C_1 \\bigl(R_s + R_{in}\\bigr)}\n}\n\\]\n\nwhere \\(R_s\\) is the source resistance of the input generator \\(V_{in}\\).\n\nAt the output, if a load capacitance \\(C_L\\) is added,\n\n\\[\nf_H \\approx \\frac{1}{2\\pi R_{out} C_L}\n\\]\n\n---\n\n## 4. Important practical caveat\n\nIn the schematic, the **source is also drawn with a direct wire to ground**. If that connection is an ideal AC/DC ground, then the input capacitor \\(C_1\\) cannot make the source voltage follow \\(V_{in}\\); the source is clamped at 0 V. In that case the small‑signal voltage gain would be\n\n\\[\n\\boxed{A_v = 0}\n\\]\n\nFor the circuit to actually function as a common‑gate amplifier, the source must be allowed to move with the input signal. Usually this is done by replacing the direct source‑to‑ground short with a **DC bias element** such as a current source (high AC impedance) from source to ground, with \\(C_1\\) coupling the signal to the source node.\n\nIf the schematic is intended as the standard capacitively‑coupled common‑gate stage (with the source node treated as the input), then the analysis above applies and the voltage gain is approximately \\(g_m R_D\\).",
        "format": "markdown",
        "sha256": "0d520ee7c9a70170c9eac2144ddb730b99f62f4e414796e8979926a88990e1a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It explicitly notices that the source is hard-shorted to ground and concludes the actual input-to-output gain is ideally zero; the common-gate gain analysis is framed as conditional on removing that short.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1901,
        "output_tokens": 12497,
        "total_tokens": 14398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1901,
        "output_tokens": 12497,
        "total_tokens": 14398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## 1. Circuit identification\nThe transistor is an **n‑channel enhancement MOS** (as drawn).  \n\n- Gate is tied to a fixed DC bias \\(V_b\\) (AC ground).  \n- The AC signal is coupled through \\(C_1\\) to the **source**.  \n- The output is taken at the **drain**, which is connected to the load resistor \\(R_D\\) and \\(V_{DD}\\).  \n\nBecause the gate is the common terminal for input and output, this is a **common‑gate (CG) amplifier** with an input applied at the source.\n\n---\n\n## 2. DC bias\n\nThe coupling capacitor \\(C_1\\) blocks DC. Therefore the source sits at **DC ground**:\n\n\\[\nV_S = 0 \\quad\\Rightarrow\\quad V_{GS}=V_b\n\\]\n\nFor saturation/active‑region operation:\n\n\\[\nV_b > V_{TH}\n\\]\n\nand\n\n\\[\nV_{DS}=V_{out}=V_{DD}-I_DR_D \\ge V_{GS}-V_{TH}=V_b-V_{TH}\n\\]\n\nUsing the long‑channel square‑law model (\\(\\lambda \\approx 0\\)):\n\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_b-V_{TH})^2\n\\]\n\nSo the quiescent output voltage is\n\n\\[\nV_{out,Q}=V_{DD}-\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_b-V_{TH})^2R_D\n\\]\n\nA practical design places \\(V_{out,Q}\\) near the middle of the allowable swing, roughly:\n\n\\[\nV_{out,Q}\\approx \\frac{V_{DD}+(V_b-V_{TH})}{2}\n\\]\n\n---\n\n## 3. Small‑signal (midband) analysis\n\nAt signal frequencies where \\(C_1\\) is a short and the gate is AC ground:\n\n\\[\nv_g=0,\\qquad v_s=v_{in},\\qquad v_{gs}=-v_{in}\n\\]\n\nDrain current variation:\n\n\\[\ni_d=g_m v_{gs}=-g_m v_{in}\n\\]\n\nThe output voltage is\n\n\\[\nv_o = g_m R_D\\, v_{in}\n\\]\n\n### Voltage gain\n\\[\n\\boxed{A_v=\\frac{v_o}{v_{in}}\\approx g_m R_D}\n\\]\n\n- The CG stage is **non‑inverting**.\n- If an external source resistance \\(R_s\\) drives the source, then\n\n\\[\nA_v \\approx \\frac{g_m R_D}{1+g_m R_s}\n\\]\n\nbecause the source node presents an input resistance of about \\(1/g_m\\).\n\n### Transconductance\n\\[\ng_m=\\mu_n C_{ox}\\frac{W}{L}(V_b-V_{TH})\n=\\frac{2I_D}{V_b-V_{TH}}\n=\\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}\n\\]\n\n### Including channel‑length modulation (\\(r_o\\))\nReplace \\(R_D\\) by \\(R_D\\parallel r_o\\):\n\n\\[\nA_v \\approx g_m(R_D\\parallel r_o)\n\\]\n\n---\n\n## 4. Input and output resistances\n\nAssuming the source/bulk are tied together (no body effect):\n\n### Input resistance (looking into the source)\n\nWith finite \\(r_o\\):\n\n\\[\nR_{in}=\\frac{r_o+R_D}{1+g_m r_o}\\approx \\frac{1}{g_m}\n\\]\n\nwhen \\(r_o \\gg R_D\\).\n\n### Output resistance (looking into the drain)\n\n\\[\nR_{out}=R_D\\parallel r_o \\approx R_D\n\\]\n\n---\n\n## 5. Low‑frequency response of \\(C_1\\)\n\nAt low frequencies the coupling capacitor cannot be treated as a short. Together with the source resistance of the signal source \\(R_s\\) and the input resistance \\(R_{in}\\approx 1/g_m\\), it forms a high‑pass network.\n\nThe signal reaching the source is\n\n\\[\n\\frac{V_s}{V_{in}}\n=\n\\frac{R_{in}}{R_s+R_{in}+1/(j\\omega C_1)}\n=\n\\frac{j\\omega C_1 R_{in}}{1+j\\omega C_1(R_s+R_{in})}\n\\]\n\nThe overall transfer function is\n\n\\[\nA_v(j\\omega)=g_m R_D\\frac{j\\omega C_1 R_{in}}{1+j\\omega C_1(R_s+R_{in})}\n\\]\n\nThe lower −3 dB corner is\n\n\\[\n\\boxed{f_L=\\frac{1}{2\\pi C_1(R_s+R_{in})}}\n\\]\n\nFor an ideal voltage source (\\(R_s=0\\)):\n\n\\[\nf_L\\approx \\frac{1}{2\\pi C_1/g_m}=\\frac{g_m}{2\\pi C_1}\n\\]\n\n---\n\n## 6. Summary of characteristics\n\n| Quantity | Expression |\n|---|---|\n| Configuration | Common‑gate (CG) amplifier |\n| DC drain current | \\(I_D=\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_b-V_{TH})^2\\) |\n| Midband gain | \\(A_v\\approx g_m R_D\\) (non‑inverting) |\n| Input resistance | \\(R_{in}\\approx 1/g_m\\) |\n| Output resistance | \\(R_{out}\\approx R_D\\) |\n| Lower cutoff | \\(f_L\\approx 1/[2\\pi C_1(R_s+1/g_m)]\\) |\n\nThe circuit is therefore a voltage amplifier with **low input impedance**, moderate voltage gain set by \\(g_m R_D\\), and a lower frequency limit controlled mainly by the coupling capacitor \\(C_1\\) and the MOSFET transconductance.",
        "format": "markdown",
        "sha256": "215f358c5119f2f35bef5f0ccafd578faa1d5f1149fa832c914c34f3bafb236a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Identifies the common-gate topology and source input, but misses the source’s direct short to ground and incorrectly concludes the circuit has gain approximately \\(g_mR_D\\).",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1901,
        "output_tokens": 9210,
        "total_tokens": 11111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7969,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1901,
        "output_tokens": 9210,
        "total_tokens": 11111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7969,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **three poles**.\n\nHere's why:\n\n- There are **four capacitors**: \\(C_{GS}\\), \\(C_{GD}\\), \\(C_{DB}\\), and \\(C_{SB}\\).\n- These four capacitors form **one all-capacitor loop**:  \n  Gate → \\(C_{GS}\\) → Source → \\(C_{SB}\\) → Ground → \\(C_{DB}\\) → Drain → \\(C_{GD}\\) → Gate.\n- Because of this loop, only **three** of the four capacitor voltages are independent.\n- With finite source resistance \\(R_S\\), the gate, drain, and source are independent signal nodes, each contributing a pole.\n\nSo the circuit is a **third-order system** with **3 poles**.",
        "format": "markdown",
        "sha256": "1a0b23db0cd10512396eb7f4be3781f33bb4a6ebb2db7a3c8c17657ed02cd7fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not three. The source is grounded, so CSB is shorted out and the source is not an independent signal node; only two capacitor voltages are independent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 16018,
        "total_tokens": 18141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15858,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 16018,
        "total_tokens": 18141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15858,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nWhy:\n\n* The source of \\(M_1\\) is at AC ground, so \\(C_{SB}\\) is connected between ground and ground and does **not** add a pole.\n* The only two independent capacitive nodes are the **gate node** and the **drain node**.\n* \\(C_{GS}\\), \\(C_{GD}\\), and \\(C_{DB}\\) form a **second-order** small-signal network.\n\nSo the transfer function has **two poles** (and one right-half-plane zero due to the feedforward through \\(C_{GD}\\)).",
        "format": "markdown",
        "sha256": "a5deb21316ef53b18f7989571b7cf559dc314388248b6fe2067c242ebff8d24a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted between grounded terminals and the remaining capacitors form a second-order network.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 4257,
        "total_tokens": 6380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4130,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2123,
        "output_tokens": 4257,
        "total_tokens": 6380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4130,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\n**Why:**  \nIn the small-signal model, the source of \\(M_1\\) is at AC ground. Therefore:\n\n- \\(C_{SB}\\) is connected between two AC-ground points, so it does **not** create a pole.\n- The input node (gate) sees capacitance to ground through \\(C_{GS}\\) and through the Miller-effect contribution of \\(C_{GD}\\).\n- The output node (drain) sees capacitance to ground through \\(C_{DB}\\) and the other Miller contribution of \\(C_{GD}\\).\n\nThus the circuit has two independent capacitive nodes:\n\n1. **Input pole** at the gate node, associated mainly with \\(R_S\\), \\(C_{GS}\\), and the reflected \\(C_{GD}\\).\n2. **Output pole** at the drain node, associated mainly with \\(R_D\\), \\(C_{DB}\\), and the reflected \\(C_{GD}\\).\n\nSo there are **two poles** (and, because of the feedforward path through \\(C_{GD}\\), also one right-half-plane zero).",
        "format": "markdown",
        "sha256": "415fd36b6a73576cb8c4669d21d3220498375121964e6c3ee46eed5bfe35ff3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: CSB is shorted between AC-grounded terminals, while the remaining capacitors contribute two independent dynamic nodes. The Cgd feedforward zero is also correctly noted.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2117,
        "output_tokens": 1087,
        "total_tokens": 3204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2117,
        "output_tokens": 1087,
        "total_tokens": 3204,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Single-Transistor Non-Inverting Feedback Amplifier\n\n## 1. Circuit Identification\n\nThe circuit is a **common-gate NMOS amplifier with series-shunt (voltage-voltage) negative feedback**:\n\n- **$M_1$**: NMOS transistor (assumed from topology/source arrow).\n- **$R_D$**: Drain load resistor.\n- **$R_1, R_2$**: Resistive voltage divider that senses $V_{out}$ and feeds a fraction $V_F$ back to the gate.\n- **Input** applied at the **source**.\n- **Output** taken at the **drain**.\n\nThe feedback network forces the gate voltage to track a fraction of the output, making the circuit behave similarly to a **single-transistor non-inverting op-amp amplifier**.\n\n---\n\n## 2. DC Operating Point\n\nThe feedback voltage is:\n\n$$V_F = V_{out}\\frac{R_2}{R_1+R_2}$$\n\nThe gate-source voltage is:\n\n$$V_{GS} = V_F - V_{in} = V_{out}\\frac{R_2}{R_1+R_2} - V_{in}$$\n\nThe drain current (saturation region) is:\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2$$\n\nThe output DC level is set by:\n\n$$V_{out} = V_{DD} - I_D R_D$$\n\n**Saturation condition**: $V_{DS} \\ge V_{GS}-V_{TH}$, i.e., $V_{out}-V_{in} \\ge V_{GS}-V_{TH}$.\n\n---\n\n## 3. Small-Signal Analysis\n\nDefine the feedback factor:\n\n$$\\beta = \\frac{R_2}{R_1+R_2}$$\n\nand the effective load:\n\n$$R_L' = R_D \\parallel r_o \\parallel (R_1+R_2)$$\n\nThe small-signal gate-source voltage is:\n\n$$v_{gs} = v_F - v_{in} = \\beta v_{out} - v_{in}$$\n\nThe drain current is $i_d = g_m v_{gs}$, and:\n\n$$v_{out} = -g_m v_{gs} R_L' = -g_m(\\beta v_{out}-v_{in})R_L'$$\n\nSolving for the **closed-loop voltage gain**:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_L'}{1+g_m\\beta R_L'}}$$\n\nFor **large loop gain** ($g_m\\beta R_L' \\gg 1$):\n\n$$\\boxed{A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}}$$\n\nThis is the key result: the gain is set primarily by the **resistor ratio**, not by transistor parameters.\n\n---\n\n## 4. Input and Output Resistances\n\nThe feedback increases input resistance and decreases output resistance.\n\n**Input resistance** (looking into the source):\n\n$$\\boxed{R_{in} \\approx \\frac{1}{g_m} + \\beta R_L'}$$\n\nFor high loop gain: $R_{in} \\approx \\beta R_L'$\n\n**Output resistance** (at the drain):\n\n$$\\boxed{R_{out} \\approx \\frac{R_L'}{1+g_m\\beta R_L'}}$$\n\nFor high loop gain: $R_{out} \\approx \\frac{1}{g_m\\beta}$\n\n---\n\n## 5. Key Characteristics\n\n| Feature | Behavior |\n|---|---|\n| **Gain polarity** | Non-increasing: $v_{out}$ rises when $v_{in}$ rises |\n| **Gain (high loop gain)** | $A_v \\approx 1+R_1/R_2$ |\n| **Input resistance** | Moderate-to-high (increased by feedback) |\n| **Output resistance** | Low (decreased by feedback) |\n| **Feedback type** | Series-shunt (voltage-voltage) |\n\n---\n\n## 6. Intuitive View\n\nWhen $g_m$ is large, the feedback forces:\n\n$$v_{gs} \\approx 0 \\quad \\Rightarrow \\quad v_F \\approx v_{in}$$\n\nSince $v_F = \\beta v_{out}$:\n\n$$\\beta v_{out} \\approx v_{in} \\quad \\Rightarrow \\quad \\frac{v_{out}}{v_{in}} \\approx \\frac{1}{\\beta}$$\n\nThis mirrors the virtual-short behavior of an op-amp non-inverting amplifier.\n\n---\n\n## 7. Practical Limitations\n\n- **Biasing sensitivity**: DC input level affects $V_{GS}$ and transistor saturation.\n- **Nonlinearity**: Large input swings drive $M_1$ out of the square-law/saturation region.\n- **Bandwidth**: Limited by output-node capacitance and the pole at the gate node ($R_1||R_2$ with $C_{gs}, C_{gd}$).\n- **Loading**: $R_1+R_2$ loads the output and consumes static current.\n- **Body effect**: If the NMOS body is not tied to its source, body effect increases gain slightly and changes input resistance.",
        "format": "markdown",
        "sha256": "9ad6ac71ae5c2e205cf099c26e3c9da874393aacc94adea7c204f2bd3138c61d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, with the correct closed-loop gain and non-inverting behavior. The secondary resistance and biasing discussion is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1769,
        "output_tokens": 12110,
        "total_tokens": 13879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1769,
        "output_tokens": 12110,
        "total_tokens": 13879,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-transistor voltage-feedback amplifier**.\n\n- **\\(M_1\\)** is assumed to be an **NMOS transistor biased in saturation**.\n- The drain load is \\(R_D\\).\n- \\(R_1\\) and \\(R_2\\) form a **voltage divider that feeds a fraction of the output back to the gate**.\n- The input is applied to the **source**, and the output is taken at the **drain**.\n\nThis is therefore a **series–shunt (voltage–voltage) feedback amplifier**: it samples the output voltage and returns a voltage in series with the input across the gate–source terminals.\n\n---\n\n## 1. DC bias\n\nBecause the gate current is essentially zero,\n\n\\[\nV_G = V_F = V_{out}\\frac{R_2}{R_1+R_2}\n\\]\n\nThe source is at the input DC level, \\(V_S=V_{in}\\). Hence\n\n\\[\nV_{GS}=V_G-V_S=\\beta V_{out}-V_{in},\n\\qquad\n\\beta\\equiv \\frac{R_2}{R_1+R_2}\n\\]\n\n\\[\nV_{DS}=V_{out}-V_{in}\n\\]\n\nThe drain current satisfies\n\n\\[\nV_{out}=V_{DD}-I_D R_D\n\\]\n\nand, in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2(1+\\lambda V_{DS})\n\\]\n\nSo the DC operating point is found by solving these two equations simultaneously. For the transistor to conduct,\n\n\\[\nV_{GS}>V_{TH}\n\\quad\\Rightarrow\\quad\n\\beta V_{out}-V_{in}>V_{TH}\n\\]\n\nIf the body terminal is not shown, we usually assume the source and body are tied together, so body effect is neglected.\n\n---\n\n## 2. Low-frequency small-signal model\n\nDefine the **feedback factor**\n\n\\[\n\\beta=\\frac{R_2}{R_1+R_2}\n\\]\n\nand the **output resistance of the divider loading**\n\n\\[\nR_{div}=R_1+R_2\n\\]\n\nThe divider draws current from the output node, so it appears in parallel with \\(R_D\\):\n\n\\[\nR_{L0}=R_D\\parallel R_{div}=R_D\\parallel (R_1+R_2)\n\\]\n\nFor the transistor, use the small-signal model with transconductance \\(g_m\\) and output resistance \\(r_o\\).\n\nThe gate voltage is\n\n\\[\nv_F=\\beta v_{out}\n\\]\n\nso the controlling voltage is\n\n\\[\nv_{gs}=v_F-v_{in}=\\beta v_{out}-v_{in}\n\\]\n\n---\n\n## 3. Voltage gain\n\nWriting KCL at the output node:\n\n\\[\n\\frac{v_{out}}{R_D}+\\frac{v_{out}}{R_1+R_2}\n+g_m(\\beta v_{out}-v_{in})+\\frac{v_{out}-v_{in}}{r_o}=0\n\\]\n\nSolving for \\(A_v=v_{out}/v_{in}\\):\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+\\frac{1}{r_o}}\n{\\frac{1}{R_D}+\\frac{1}{R_1+R_2}+g_m\\beta+\\frac{1}{r_o}}\n}\n\\]\n\nIf \\(r_o\\gg R_D,R_{div}\\), this simplifies to\n\n\\[\n\\boxed{\nA_v\\approx\n\\frac{g_m R_{L0}}{1+g_m\\beta R_{L0}}\n}\n\\]\n\nWhen the loop gain is large, \\(g_m\\beta R_{L0}\\gg 1\\),\n\n\\[\n\\boxed{\nA_v\\approx \\frac{1}{\\beta}=1+\\frac{R_1}{R_2}\n}\n\\]\n\nSo, just like a non-inverting op-amp stage, the closed-loop gain is set mainly by the resistor ratio.\n\n---\n\n## 4. Input resistance\n\nThe input is at the source terminal. Since gate current is zero, the source current equals the current delivered to the output load. The result is\n\n\\[\n\\boxed{\nR_{in}\\approx \\frac{R_{L0}}{A_v}\n=\n\\frac{1+g_m\\beta R_{L0}}{g_m}\n=\n\\frac{1}{g_m}+\\beta R_{L0}\n}\n\\]\n\nassuming \\(r_o\\) is large.\n\nSo the series feedback **raises** the input resistance above the ordinary common-gate value \\(1/g_m\\). For high loop gain,\n\n\\[\nR_{in}\\approx \\beta R_{L0}\n\\]\n\n---\n\n## 5. Output resistance\n\nTo find \\(R_{out}\\), ground the input (\\(v_{in}=0\\)) and apply a test voltage at the output. The feedback causes the gate to move with the output, so the effective transconductance is \\(g_m\\beta\\). The result is\n\n\\[\n\\boxed{\nR_{out}=R_D\\parallel R_{div}\\parallel r_o\\parallel \\frac{1}{g_m\\beta}\n}\n\\]\n\nFor \\(r_o\\) large,\n\n\\[\n\\boxed{\nR_{out}\\approx R_{L0}\\parallel \\frac{1}{g_m\\beta}\n}\n\\]\n\nThus the shunt feedback **lowers** the output resistance.\n\n---\n\n## 6. Feedback interpretation\n\n| Quantity | Open-loop value | Closed-loop value |\n|---|---|---|\n| Forward gain | \\(A_0\\approx g_m R_{L0}\\) | \\(A_v\\approx \\dfrac{A_0}{1+A_0\\beta}\\) |\n| Loop gain | \\(T=A_0\\beta=g_m\\beta R_{L0}\\) | — |\n| Input resistance | \\(\\approx 1/g_m\\) | \\(\\approx \\dfrac{1}{g_m}(1+T)\\) |\n| Output resistance | \\(\\approx R_{L0}\\) | \\(\\approx \\dfrac{R_{L0}}{1+T}\\) |\n\nThis is the classic behavior of a **voltage amplifier with series–shunt feedback**: gain is stabilized by the feedback network, input resistance goes up, and output resistance goes down.\n\n---\n\n## 7. Practical notes\n\n- Choose \\(R_1+R_2\\gg R_D\\) if you want the divider to load the output lightly. Then \\(R_{L0}\\approx R_D\\).\n- The circuit is **DC-coupled** as drawn, so the DC level of \\(V_{in}\\) sets the bias current. If \\(V_{in}\\) is a pure AC source, a coupling capacitor and a separate DC bias path for the source would be needed.\n- At high frequencies, parasitic capacitances (\\(C_{gs}, C_{gd}, C_{db}\\)) and the resistors create poles that affect bandwidth and stability.\n- If the body is tied to ground rather than to the source, include the body-effect transconductance \\(g_{mb}\\) and a threshold voltage that depends on \\(V_{SB}\\).\n\nIf you want a numerical example or a specific parameter (gain, bias point, bandwidth, etc.) for given component values, just provide them.",
        "format": "markdown",
        "sha256": "b9449764ed26857f958e3aad6fe38486a8c11502bb2a0394ab653ac065b589a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback behavior, with the correct closed-loop gain. Extra resistance and bias discussions do not contradict the essential model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1767,
        "output_tokens": 15446,
        "total_tokens": 17213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1767,
        "output_tokens": 15446,
        "total_tokens": 17213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13918,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an **NMOS common‑gate stage with resistive drain–to–gate feedback**. The input is applied to the source of \\(M_1\\), the output is taken at the drain, and the gate voltage is derived from the output through the divider \\(R_1,R_2\\).\n\nBelow is a complete small‑signal and DC analysis.\n\n---\n\n## 1. DC operating point\n\nDefine the feedback factor\n\n\\[\nk=\\frac{R_2}{R_1+R_2}\n\\]\n\nSince the gate draws no DC current,\n\n\\[\nV_G = V_F = kV_D\n\\]\n\nThe source sits at the DC input voltage:\n\n\\[\nV_S = V_{IN}\n\\]\n\nHence\n\n\\[\nV_{GS}=V_G-V_S=kV_D-V_{IN}\n\\]\n\nThe drain current is set by \\(R_D\\):\n\n\\[\nI_D=\\frac{V_{DD}-V_D}{R_D}\n\\]\n\nand, for saturation,\n\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}\\bigl(V_{GS}-V_{TH}\\bigr)^2\n\\]\n\nThese two equations determine the bias point \\((I_D,V_D)\\). The transistor must remain in saturation:\n\n\\[\nV_{DS}=V_D-V_{IN}>V_{GS}-V_{TH}\n\\]\n\nThe drain–to–gate feedback stabilizes the bias: if \\(I_D\\) tries to increase, \\(V_D\\) drops, which lowers \\(V_G\\) and therefore \\(V_{GS}\\), pushing \\(I_D\\) back down.\n\n---\n\n## 2. Small‑signal model\n\nAt low frequencies, neglecting channel‑length modulation first:\n\n\\[\nR_L = R_D \\parallel (R_1+R_2)\n\\]\n\nThe divider loads the output with \\(R_1+R_2\\).\n\nThe gate voltage is\n\n\\[\nv_g = k v_{out}\n\\]\n\nThe source voltage is \\(v_{in}\\), so\n\n\\[\nv_{gs}=v_g-v_{in}=k v_{out}-v_{in}\n\\]\n\nThe drain current is \\(g_m v_{gs}\\), giving\n\n\\[\nv_{out}=-g_m v_{gs}R_L\n\\]\n\nSubstitute \\(v_{gs}\\):\n\n\\[\nv_{out}=-g_m(k v_{out}-v_{in})R_L\n\\]\n\n\\[\nv_{out}(1+g_m k R_L)=g_m R_L v_{in}\n\\]\n\n### Voltage gain\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m R_L}{1+g_m k R_L}}\n\\]\n\nIf the loop gain is large, \\(g_m k R_L \\gg 1\\),\n\n\\[\n\\boxed{A_v \\approx \\frac{1}{k}=1+\\frac{R_1}{R_2}}\n\\]\n\nSo the gain is set mainly by the resistor ratio, not by the transistor parameters.\n\n---\n\n## 3. Input resistance\n\nThe current entering the source is\n\n\\[\ni_{in}=-g_m v_{gs}=g_m(v_{in}-k v_{out})\n\\]\n\nUsing \\(v_{out}=A_v v_{in}\\),\n\n\\[\nR_{in}=\\frac{v_{in}}{i_{in}}\n      =\\frac{1+g_m k R_L}{g_m}\n\\]\n\n\\[\n\\boxed{R_{in}=\\frac{1}{g_m}+kR_L}\n\\]\n\nThe feedback **raises** the input resistance. For high loop gain and \\(R_D\\gg R_1+R_2\\),\n\n\\[\nR_{in}\\approx R_2\n\\]\n\n---\n\n## 4. Output resistance\n\nLooking into the output with the input source shorted (\\(v_{in}=0\\)):\n\n\\[\nR_{out}=\\frac{R_L}{1+g_m k R_L}\n\\]\n\nEquivalently,\n\n\\[\n\\boxed{R_{out}=R_L \\parallel \\frac{1}{g_m k}}\n\\]\n\nThe feedback **lowers** the output resistance.\n\n---\n\n## 5. Including channel‑length modulation (\\(r_o\\))\n\nIf \\(r_o\\) is not negligible, the expressions become:\n\n\\[\n\\boxed{A_v=\\frac{(g_m+1/r_o)R_L}{1+g_m k R_L+R_L/r_o}}\n\\]\n\n\\[\n\\boxed{R_{out}=\\frac{1}{\\frac{1}{R_L}+\\frac{1}{r_o}+g_m k}\n      =R_L \\parallel r_o \\parallel \\frac{1}{g_m k}}\n\\]\n\nFor \\(r_o\\gg R_L\\), these reduce to the simpler results above.\n\n---\n\n## 6. Body effect\n\nIf the body is grounded (not tied to the source), the body effect adds a transconductance \\(g_{mb}\\). In the approximate expressions:\n\n- Replace \\(g_m\\) in the source‑driven terms with \\(g_m+g_{mb}\\):\n  \\[\n  A_v \\approx \\frac{(g_m+g_{mb})R_L}{1+g_m k R_L}\n  \\]\n- The input resistance becomes\n  \\[\n  R_{in}\\approx \\frac{1+g_m k R_L}{g_m+g_{mb}}\n  \\]\n\nThe feedback term \\(g_m k R_L\\) still uses the gate transconductance \\(g_m\\).\n\n---\n\n## 7. Feedback interpretation\n\nThis is a **series–shunt (voltage–voltage) feedback** amplifier:\n\n- The output **voltage** is sampled by the \\(R_1,R_2\\) divider (shunt sampling).\n- A fraction \\(k v_{out}\\) is fed back to the gate and compared in series with the input across \\(v_{GS}\\).\n\nLoop gain:\n\n\\[\n\\boxed{T=g_m k R_L}\n\\]\n\nConsequences:\n\n| Quantity | Without feedback (\\(k=0\\)) | With feedback |\n|----------|---------------------------|---------------|\n| Gain     | \\(g_m R_L\\)               | \\(\\dfrac{g_m R_L}{1+g_m k R_L}\\approx \\dfrac{1}{k}\\) |\n| \\(R_{in}\\) | \\(1/g_m\\)                | \\(\\dfrac{1}{g_m}+kR_L\\) |\n| \\(R_{out}\\)| \\(R_L\\)                   | \\(\\dfrac{R_L}{1+g_m k R_L}\\) |\n\nThus the circuit trades raw gain for a precise, stable gain set by resistors, a higher input resistance, and a lower output resistance.",
        "format": "markdown",
        "sha256": "99e4d8f7726b15550eca82ef9e9986ca1a59605ebf9e1eb31d76541bab118c4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its closed-loop gain matches the golden solution; extra secondary analyses do not affect the score.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1767,
        "output_tokens": 16817,
        "total_tokens": 18584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1767,
        "output_tokens": 16817,
        "total_tokens": 18584,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: NMOS Source Follower with Current-Source Load\n\n## 1. Circuit Identification\n\nThe circuit is a **common-drain amplifier** (also called a **source follower**):\n\n- **M₁**: NMOS transistor configured as a source follower.  \n  - Gate = input signal $V_{in}$  \n  - Drain = connected to $V_{DD}$ (AC ground)  \n  - Source = output node $V_{out}$\n\n- **M₂**: NMOS transistor biased by a fixed voltage $V_b$, acting as a **current-source load** (current sink) from $V_{out}$ to ground.\n\nThe output is taken at the source of $M_1$, so the drain is common to both input and output — hence the name *common-drain* amplifier.\n\n---\n\n## 2. DC Operation\n\n$M_2$ sinks a nearly constant current $I_D$ set by the bias voltage $V_b$:\n\n$$I_{D2} \\approx \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b - V_{TH2})^2$$\n\nBecause $M_1$ and $M_2$ are in series:\n\n$$I_{D1} = I_{D2} = I_D$$\n\nFor $M_1$:\n\n$$V_{GS1} = V_{in} - V_{out}$$\n\nSince the drain current is approximately constant, $V_{GS1}$ is also approximately constant. Therefore:\n\n$$\\boxed{V_{out} \\approx V_{in} - V_{GS1}}$$\n\nThe output **follows** the input with a DC level shift of approximately $V_{GS1}$.\n\n### Saturation Conditions\n\n- For $M_2$ to remain in saturation:  \n  $$V_{out} \\geq V_b - V_{TH2} = V_{OV2}$$\n\n- For $M_1$ to remain in saturation:  \n  $$V_{DD} - V_{out} \\geq V_{GS1} - V_{TH1} = V_{OV1}$$\n\nSo the allowable output swing is:\n\n$$\\boxed{V_{OV2} \\leq V_{out} \\leq V_{DD} - V_{OV1}}$$\n\n---\n\n## 3. Small-Signal Analysis\n\nThe small-signal equivalent includes:\n- $g_{m1}$: transconductance of $M_1$\n- $g_{mb1}$: body-effect transconductance of $M_1$ (if its body is grounded)\n- $r_{o1}$, $r_{o2}$: output resistances of $M_1$ and $M_2$\n\n### Voltage Gain\n\nApplying KCL at the output node:\n\n$$g_{m1}(V_{in} - V_{out}) - g_{mb1}V_{out} = \\frac{V_{out}}{r_{o1}} + \\frac{V_{out}}{r_{o2}}$$\n\nSolving for $A_v = V_{out}/V_{in}$:\n\n$$\\boxed{A_v = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}}}$$\n\nIf channel-length modulation and output resistances are negligible:\n\n$$\\boxed{A_v \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}} = \\frac{1}{1 + \\eta}}$$\n\nwhere $\\eta = g_{mb1}/g_{m1}$.\n\nThe gain is **slightly less than 1** due to the body effect. If the body effect can be eliminated (e.g., by tying the body to the source), then $A_v \\approx 1$.\n\n### Output Resistance\n\nWith the input shorted ($V_{in} = 0$):\n\n$$\\boxed{R_{out} \\approx \\frac{1}{g_{m1} + g_{mb1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1} + g_{mb1}}}$$\n\nThe output resistance is **low**, which is a key advantage of the source follower.\n\n### Input Resistance\n\nThe input is connected to the gate of a MOSFET, so:\n\n$$\\boxed{R_{in} \\approx \\infty}$$\n\n---\n\n## 4. Summary of Key Characteristics\n\n| Parameter | Expression / Value |\n|-----------|-------------------|\n| Configuration | Common-drain (source follower) |\n| Voltage gain | $\\approx \\frac{1}{1+\\eta} < 1$ |\n| Input resistance | Very high ($\\approx \\infty$) |\n| Output resistance | Low, $\\approx \\frac{1}{g_{m1}+g_{mb1}}$ |\n| DC level shift | $V_{out} \\approx V_{in} - V_{GS1}$ |\n| Output swing | $V_{OV2} \\leq V_{out} \\leq V_{DD} - V_{OV1}$ |\n\n## 5. Main Function\n\nThis circuit is commonly used as a **voltage buffer**:\n- It provides **impedance transformation**: high input impedance and low output impedance.\n- It passes the input voltage to the output with approximately **unity gain**, shifted down by one $V_{GS}$.\n- It can drive low-impedance loads without significantly loading the previous stage.",
        "format": "markdown",
        "sha256": "ec6a256f6340158f88d44a18efd5f6662f4c6e85e3fec2aa0e9d0731dbfdc832"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as the current-source sink, with output at M1’s source. It gives the positive, slightly sub-unity gain and appropriate body-effect, output-resistance, and low-output-resistance descriptions.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1292,
        "output_tokens": 4199,
        "total_tokens": 5491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1292,
        "output_tokens": 4199,
        "total_tokens": 5491,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑drain (source‑follower) amplifier** with an active current‑sink load.\n\n- \\(M_1\\) is the drive transistor: its drain is tied to \\(V_{DD}\\) (ac ground) and its source is the output node.  \n- \\(M_2\\) is biased by the dc voltage \\(V_b\\) so that it behaves as a current source (current sink) tied from \\(V_{out}\\) to ground.\n\nAssuming the devices are n‑channel MOSFETs and that \\(M_2\\) is biased in saturation, the analysis proceeds as follows.\n\n---\n\n## 1. Qualitative / DC Operation\n\nThe current through the two devices is the same:\n\n\\[\nI_{D1}=I_{D2}=I\n\\]\n\nThe drain current of the current sink is set by \\(V_b\\)\n\n\\[\nI \\approx \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n      \\left(V_b-V_{TH2}\\right)^2\n\\]\n\nThe output dc level follows the input with a level shift equal to \\(V_{GS1}\\):\n\n\\[\nV_{out}=V_{in}-V_{GS1}\n\\]\n\nSince \\(I_{D1}=I\\) is fixed, \\(V_{GS1}\\) is essentially constant:\n\n\\[\nV_{GS1}=V_{TH1}+\\sqrt{\\frac{2I}{\\mu_n C_{ox}(W/L)_1}}\n\\]\n\nwhere \\(V_{TH1}\\) includes the **body effect** because the source of \\(M_1\\) sits at \\(V_{out}\\) while its body (substrate) is usually grounded:\n\n\\[\nV_{TH1}=V_{TH0}+\\gamma\\!\\left(\\sqrt{2\\phi_F+V_{out}}-\\sqrt{2\\phi_F}\\right)\n\\]\n\nSaturation conditions:\n\n- \\(M_2\\): \\(V_{out}\\ge V_b-V_{TH2}\\)  \n- \\(M_1\\): \\(V_{DD}-V_{out}\\ge V_{GS1}-V_{TH1}\\)\n\n---\n\n## 2. Small‑Signal Model\n\nFor small signals, \\(M_2\\) is just its output resistance\n\n\\[\nr_{o2}=\\frac{1}{\\lambda_2 I}\n\\]\n\nand \\(M_1\\) is modeled by \\(g_{m1}\\), body transconductance \\(g_{mb1}\\), and output resistance\n\n\\[\nr_{o1}=\\frac{1}{\\lambda_1 I}.\n\\]\n\nKCL at the output node gives\n\n\\[\nv_o(g_{ds1}+g_{ds2})=\ng_{m1}(v_{in}-v_o)-g_{mb1}v_o\n\\]\n\nso the small‑signal voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_{in}}\n=\n\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\n}\n\\]\n\nwhere \\(g_{ds}=1/r_o\\).\n\nEquivalently, letting \\(R_{eq}=r_{o1}\\parallel r_{o2}\\),\n\n\\[\nA_v=\n\\frac{g_{m1}R_{eq}}{1+(g_{m1}+g_{mb1})R_{eq}}\n\\]\n\nand the output resistance seen at \\(V_{out}\\) is\n\n\\[\n\\boxed{\nR_{out}=\n\\frac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\n}\n\\]\n\nIf a load \\(R_L\\) is connected from \\(V_{out}\\) to ground, replace \\(R_{eq}\\) by\n\n\\[\nR_{eq}=r_{o1}\\parallel r_{o2}\\parallel R_L.\n\\]\n\n---\n\n## 3. Useful Approximations\n\nUsually \\(g_m\\gg g_{mb},g_{ds}\\), so\n\n\\[\nA_v \\approx \\frac{1}{1+\\eta},\n\\qquad\n\\eta=\\frac{g_{mb1}}{g_{m1}}\n\\]\n\n\\[\nR_{out}\\approx \\frac{1}{g_{m1}(1+\\eta)}.\n\\]\n\nThus the source follower has:\n\n- **Noninverting gain slightly less than 1**\n- **Very high input resistance** (ideally infinite at low frequency at the gate of \\(M_1\\))\n- **Low output resistance** \\(\\approx 1/[g_{m1}(1+\\eta)]\\)\n\nThe body effect is the main reason the gain deviates from unity.\n\n---\n\n## 4. Frequency Response\n\nThe dominant pole is set by the capacitance at \\(V_{out}\\). The effective capacitance includes the load \\(C_L\\), the source–bulk capacitance of \\(M_1\\), and the drain–bulk capacitance of \\(M_2\\). Because the voltage gain from gate to source is near unity, the Miller multiplication of \\(C_{gs1}\\) is small. The approximate bandwidth is\n\n\\[\nf_{-3dB}\\approx \\frac{1}{2\\pi R_{out}C_{out}}.\n\\]\n\n---\n\n## 5. Summary\n\n| Parameter | Expression |\n|-----------|------------|\n| DC output | \\(V_{out}=V_{in}-V_{GS1}\\) |\n| Voltage gain | \\(\\displaystyle A_v=\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\\) |\n| Output resistance | \\(\\displaystyle R_{out}=\\frac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}}\\) |\n| Approximate gain | \\(A_v\\approx \\dfrac{1}{1+g_{mb1}/g_{m1}}\\) |\n| Approximate \\(R_{out}\\) | \\(R_{out}\\approx \\dfrac{1}{g_{m1}(1+g_{mb1}/g_{m1})}\\) |\n\nSo the circuit acts as a **voltage buffer**: it provides current gain and level shifts the input down by \\(V_{GS1}\\), while presenting a high input impedance and a low output impedance.",
        "format": "markdown",
        "sha256": "e3dbb10bfd557f64d6ec53b7bf658f52e12d49a74137d22874536b9fb75a6a1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-sink load, and derives the positive gain below unity with body effect and finite output resistances. The output-resistance expression is also consistent with the small-signal model.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1292,
        "output_tokens": 9402,
        "total_tokens": 10694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1292,
        "output_tokens": 9402,
        "total_tokens": 10694,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7920,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Common‑Source Amplifier with Active Load\n\nThe circuit is a **single-stage common-source (CS) amplifier**.  \n- **M₁** is the **input/common-source transistor** (PMOS): gate = \\(V_{in}\\), source = \\(V_{DD}\\), drain = \\(V_{out}\\).  \n- **M₂** is an **NMOS current-source load**: gate biased at a fixed voltage \\(V_b\\), source = GND, drain = \\(V_{out}\\).\n\nTogether they form a complementary CMOS inverting stage with a high-resistance active load.\n\n---\n\n## 1. DC Operating Point\n\nBoth transistors are biased in saturation. The same DC current flows through both devices:\n\n\\[\nI_{D1}=I_{D2}=I_D\n\\]\n\nFor the NMOS load (M₂), \\(V_b\\) sets a nearly constant current:\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_b-V_{THN})^2\n\\]\n\nFor the PMOS input device (M₁):\n\n\\[\nV_{SG1}=V_{DD}-V_{in}\n\\]\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{SG1}-|V_{THP}|)^2\n\\]\n\nAt the bias point these equations determine the quiescent \\(V_{out}\\). Since M₂ acts as a current sink, any small change in \\(V_{in}\\) modulates \\(I_{D1}\\), and \\(V_{out}\\) must change significantly to keep \\(I_{D1}=I_{D2}\\).\n\n---\n\n## 2. Small-Signal Voltage Gain\n\nThe small-signal equivalent has:\n- Transconductance of M₁: \\(g_{m1}\\)\n- Output resistance of M₁: \\(r_{o1}= \\dfrac{1}{\\lambda_p I_D}\\)\n- Output resistance of M₂: \\(r_{o2}= \\dfrac{1}{\\lambda_n I_D}\\)\n\nThe effective load seen by M₁ is the parallel combination of the two output resistances:\n\n\\[\nR_{out}=r_{o1}\\parallel r_{o2}\n\\]\n\nThe voltage gain is therefore:\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}(r_{o1}\\parallel r_{o2})}\n\\]\n\nThe **negative sign** confirms the stage is **inverting**: increasing \\(V_{in}\\) reduces \\(V_{SG1}\\), decreases \\(I_{D1}\\), and pulls \\(V_{out}\\) lower.\n\n---\n\n## 3. Output Resistance\n\n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}}\n\\]\n\nBecause both transistors contribute high small-signal resistance, this topology achieves much higher gain than a common-source stage with a passive resistor load.\n\n---\n\n## 4. Frequency Response\n\nThe dominant pole is created at the output node by the high output resistance and the total capacitance at \\(V_{out}\\):\n\n\\[\n\\omega_p \\approx \\frac{1}{R_{out}C_L}\n\\]\n\nwhere \\(C_L\\) includes:\n- Drain-bulk capacitances: \\(C_{db1}\\), \\(C_{db2}\\)\n- Gate-drain capacitance of M₂: \\(C_{gd2}\\) (connected to AC ground at \\(V_b\\))\n- Any external load capacitance\n\nThe gate-drain capacitance of M₁, \\(C_{gd1}\\), appears **Miller-multiplied** at the input:\n\n\\[\nC_{M1}=(1+|A_v|)C_{gd1}\n\\]\n\nThis Miller capacitance can form a significant input pole if the source driving \\(V_{in}\\) has large resistance.\n\n---\n\n## 5. Voltage Headroom / Output Swing\n\nFor both transistors to remain in saturation:\n\n**M₂ (NMOS):**\n\\[\nV_{DS2}\\ge V_{GS2}-V_{THN}\n\\]\n\\[\nV_{out}\\ge V_b-V_{THN}\n\\]\n\n**M₁ (PMOS):**\n\\[\nV_{SD1}\\ge V_{SG1}-|V_{THP}|\n\\]\n\\[\nV_{out}\\le V_{in}+|V_{THP}|\n\\]\n\nThus the usable output swing is roughly:\n\n\\[\n\\boxed{V_{ov2}\\;\\lesssim\\;V_{out}\\;\\lesssim\\;V_{DD}-|V_{ov1}|}\n\\]\n\nwhere \\(V_{ov2}=V_b-V_{THN}\\) and \\(|V_{ov1}|=V_{SG1}-|V_{THP}|\\) are the overdrive voltages.\n\n---\n\n## 6. Summary\n\n| Property | Expression / Characteristic |\n|----------|----------------------------|\n| Topology | Common-source with active current-source load |\n| Gain | \\(-g_{m1}(r_{o1}\\parallel r_{o2})\\) — high, inverting |\n| Output resistance | \\(r_{o1}\\parallel r_{o2}\\) |\n| Bandwidth limitation | Dominant output pole at \\(1/(R_{out}C_L)\\) |\n| Key advantage | High gain in a compact CMOS implementation |\n| Key trade-off | Output swing limited by overdrive voltages of M₁ and M₂ |\n\nThis circuit is widely used as a high-gain gain stage in operational amplifiers, comparators, and general analog building blocks.",
        "format": "markdown",
        "sha256": "614f464e32dc8a552036dffe9ff757e70f074353fb634326e3760ee8250c5dbf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a common-source stage with a PMOS input device and gives an inverting gain. The figure is an NMOS source follower with positive gain near unity; the golden solution explicitly assigns 0 to this topology error.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1292,
        "output_tokens": 9288,
        "total_tokens": 10580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1292,
        "output_tokens": 9288,
        "total_tokens": 10580,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# CMOS Inverter Analysis\n\nThe circuit shown is a **complementary MOS (CMOS) inverter**, the fundamental building block of modern digital logic.\n\n## 1. Circuit Topology\n\n- **M₁**: NMOS transistor → acts as a **pull-down** network (connects output to ground)\n- **M₂**: PMOS transistor → acts as a **pull-up** network (connects output to VDD)\n- Both gates are tied to the input $V_{in}$\n- The output $V_{out}$ is taken from the common drain node\n\n## 2. DC Operation / Truth Table\n\n| $V_{in}$ | M₁ (NMOS) | M₂ (PMOS) | $V_{out}$ | State |\n|----------|-----------|-----------|-----------|-------|\n| 0 (LOW)  | OFF       | ON        | $V_{DD}$  | Logic HIGH |\n| $V_{DD}$ (HIGH) | ON  | OFF       | 0         | Logic LOW |\n\nKey observation: In either steady state, **one transistor is always OFF**, so there is ideally no static current path from $V_{DD}$ to ground.\n\n## 3. Voltage Transfer Characteristic (VTC)\n\nThe VTC can be divided into five regions:\n\n1. **$0 \\leq V_{in} < V_{THN}$** → M₁ OFF, M₂ ON (linear) → $V_{out} = V_{DD}$\n2. **$V_{THN} \\leq V_{in} < V_M$** → M₁ ON (saturation), M₂ ON (linear) → $V_{out}$ begins falling\n3. **$V_{in} \\approx V_M$** → Both M₁ and M₂ in saturation → steep transition, maximum voltage gain\n4. **$V_M < V_{in} \\leq V_{DD} - |V_{THP}|$** → M₁ ON (linear), M₂ ON (saturation) → $V_{out}$ approaches 0\n5. **$V_{DD} - |V_{THP}| < V_{in} \\leq V_{DD}$** → M₁ ON (linear), M₂ OFF → $V_{out} = 0$\n\n## 4. Switching Threshold $V_M$\n\nThe switching threshold is the point where $V_{in} = V_{out}$. At this point, both transistors are saturated. Equating drain currents:\n\n$$I_{D1} = I_{D2}$$\n\n$$\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_M - V_{THN})^2 = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_M - |V_{THP}|)^2$$\n\nSolving:\n\n$$V_M = \\frac{\\sqrt{k_n}V_{THN} + \\sqrt{k_p}(V_{DD} - |V_{THP}|)}{\\sqrt{k_n} + \\sqrt{k_p}}$$\n\nwhere $k_n = \\mu_n C_{ox}(W/L)_1$ and $k_p = \\mu_p C_{ox}(W/L)_2$.\n\nFor a **symmetric inverter** with $k_n = k_p$ and $V_{THN} = |V_{THP}|$:\n\n$$\\boxed{V_M = \\frac{V_{DD}}{2}}$$\n\n## 5. Noise Margins\n\nNoise margins quantify how much noise the circuit can tolerate:\n\n$$NM_L = V_{IL} - V_{OL}$$\n$$NM_H = V_{OH} - V_{IH}$$\n\nFor an ideal CMOS inverter:\n- $V_{OH} \\approx V_{DD}$\n- $V_{OL} \\approx 0$\n- The transition region is very steep (high small-signal gain)\n\nThis gives CMOS inverters **excellent noise margins** and high noise immunity.\n\n## 6. Power Consumption\n\n- **Static power**: Ideally zero (no direct $V_{DD}$-to-ground path in steady state)\n- **Dynamic power**: Dominates at high frequencies\n  $$P_{dyn} = C_L V_{DD}^2 f$$\n  where $C_L$ is load capacitance and $f$ is switching frequency\n- **Short-circuit power**: Small power dissipated during transitions when both transistors briefly conduct\n- **Leakage power**: Subthreshold and gate leakage in modern technologies\n\n## 7. Propagation Delay\n\n- $t_{PHL}$: determined by NMOS current discharging $C_L$\n- $t_{PLH}$: determined by PMOS current charging $C_L$\n\nFor symmetric sizing, the rise and fall delays are approximately equal.\n\n## Summary\n\nThe CMOS inverter is valued for:\n- Full rail-to-rail output swing (0 to $V_{DD}$)\n- Negligible static power dissipation\n- Large noise margins\n- High input impedance\n- Regenerative logic levels\n\nIt is the cornerstone of CMOS digital integrated circuits.",
        "format": "markdown",
        "sha256": "6506fac28afc7c8940e8a2adf2d22111d3486ae608505d38e5ff4e0ca848d8cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its logic-level operation accurately. The additional analysis is consistent with the circuit and does not contradict its operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 2999,
        "total_tokens": 3318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 2999,
        "total_tokens": 3318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter**, the most fundamental building block in digital CMOS logic.\n\n- \\(M_1\\) is an **NMOS** transistor with its source grounded.\n- \\(M_2\\) is a **PMOS** transistor with its source tied to \\(V_{DD}\\).\n- The gates of both transistors are connected together to the input \\(V_{in}\\).\n- The drains of both transistors are connected together to form the output \\(V_{out}\\).\n\n---\n\n## 1. Basic DC Operation\n\nThe inverter has two stable states:\n\n| Input \\(V_{in}\\) | NMOS \\(M_1\\) | PMOS \\(M_2\\) | Output \\(V_{out}\\) |\n|---|---|---|---|\n| **Low** (\\(\\approx 0\\)) | OFF | ON | **High** (\\(\\approx V_{DD}\\)) |\n| **High** (\\(\\approx V_{DD}\\)) | ON | OFF | **Low** (\\(\\approx 0\\)) |\n\n- When \\(V_{in}\\) is low, the NMOS is off and the PMOS pulls the output up to \\(V_{DD}\\).\n- When \\(V_{in}\\) is high, the PMOS is off and the NMOS pulls the output down to ground.\n\nThus, the logic function is:\n\n\\[\nV_{out} = \\overline{V_{in}}\n\\]\n\n---\n\n## 2. Voltage Transfer Characteristic (VTC)\n\nAs \\(V_{in}\\) sweeps from \\(0\\) to \\(V_{DD}\\), the output transitions from \\(V_{DD}\\) to \\(0\\). The VTC has three key regions:\n\n1. **Region I:** \\(V_{in} < V_{thn}\\)  \n   - NMOS is off, PMOS is on (triode/linear).  \n   - \\(V_{out} \\approx V_{DD}\\).\n\n2. **Region II:** Around the switching point  \n   - Both transistors are on and operate in saturation.  \n   - The output changes rapidly with high gain.\n\n3. **Region III:** \\(V_{in} > V_{DD} - |V_{thp}|\\)  \n   - PMOS is off, NMOS is on (triode/linear).  \n   - \\(V_{out} \\approx 0\\).\n\nThe **switching threshold** \\(V_M\\) is the point where \\(V_{in} = V_{out}\\). Assuming both transistors are in saturation:\n\n\\[\n\\frac{1}{2}k_n(V_M - V_{thn})^2 = \\frac{1}{2}k_p(V_{DD} - V_M - |V_{thp}|)^2\n\\]\n\nwhere \\(k = \\mu C_{ox}(W/L)\\). Solving gives:\n\n\\[\nV_M = \\frac{V_{thn} + \\sqrt{\\frac{k_p}{k_n}}(V_{DD} - |V_{thp}|)}\n{1 + \\sqrt{\\frac{k_p}{k_n}}}\n\\]\n\nFor perfectly symmetric devices (\\(V_{thn} = |V_{thp}|\\), \\(k_n = k_p\\)):\n\n\\[\n\\boxed{V_M = \\frac{V_{DD}}{2}}\n\\]\n\nThis gives equal and maximum noise margins for both logic levels.\n\n---\n\n## 3. Noise Margins\n\nThe noise margins measure how much unwanted voltage the gate can tolerate without producing an incorrect logic value.\n\n\\[\nNM_H = V_{OH} - V_{IH}\n\\]\n\n\\[\nNM_L = V_{IL} - V_{OL}\n\\]\n\nFor an ideal symmetric CMOS inverter:\n\n\\[\nNM_H \\approx NM_L \\approx \\frac{V_{DD}}{2}\n\\]\n\nThis makes CMOS very robust against noise and interference.\n\n---\n\n## 4. Small-Signal Gain\n\nAround the switching threshold, both transistors conduct, and the inverter behaves like a high-gain inverting amplifier.\n\nThe small-signal voltage gain is:\n\n\\[\nA_v \\approx -(g_{mn} + g_{mp})(r_{on} \\parallel r_{op})\n\\]\n\nwhere:\n- \\(g_{mn}, g_{mp}\\) are the transconductances of \\(M_1\\) and \\(M_2\\),\n- \\(r_{on}, r_{op}\\) are their output resistances.\n\nThe gain is large in the transition region, which is what gives the inverter its sharp switching behavior.\n\n---\n\n## 5. Dynamic Behavior\n\nWhen the input changes, the output does not change instantly because it must charge or discharge the load capacitance \\(C_L\\), which includes:\n\n- gate/drain overlap capacitances,\n- drain-bulk junction capacitances,\n- interconnect capacitance,\n- input capacitance of the next stage.\n\nThe propagation delay is approximately:\n\n\\[\nt_p \\approx \\frac{C_L V_{DD}}{2 I_{drive}}\n\\]\n\nwhere \\(I_{drive}\\) is the average current of the charging/discharging transistor.\n\n---\n\n## 6. Power Consumption\n\nA major advantage of CMOS is its low static power:\n\n\\[\nP_{static} \\approx 0\n\\]\n\nbecause at steady state, one transistor is always off, blocking the path from \\(V_{DD}\\) to ground.\n\nHowever, dynamic power is dissipated when the output switches:\n\n\\[\nP_{dynamic} = C_L V_{DD}^2 f\n\\]\n\nwhere:\n- \\(C_L\\) is the load capacitance,\n- \\(f\\) is the switching frequency.\n\nThere is also a small **short-circuit power** during the brief time both transistors are on while the input transitions.\n\n---\n\n## 7. Summary\n\n| Feature | Behavior |\n|---|---|\n| **Logic function** | Inverter: \\(V_{out} = \\overline{V_{in}}\\) |\n| **Output swing** | Rail-to-rail: \\(0\\) to \\(V_{DD}\\) |\n| **Static power** | Approximately zero |\n| **Noise margin** | High, ideally near \\(V_{DD}/2\\) |\n| **Gain** | High around switching point |\n| **Speed** | Limited by load capacitance and drive current |\n\nTherefore, the circuit functions as a **low-power, high-noise-margin digital inverter**, and is the cornerstone of modern CMOS digital systems.",
        "format": "markdown",
        "sha256": "0b14972a5952777a84f1b9a9fad9dab9cb11acba2a27d783a6be871b2aa6bfd2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and complementary operation. The added analysis is consistent with the circuit; the golden solution grants full credit for this identification.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 321,
        "output_tokens": 2217,
        "total_tokens": 2538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 321,
        "output_tokens": 2217,
        "total_tokens": 2538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 944,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **complementary MOS (CMOS) inverter**.\n\n### 1. Circuit identification\n- **M₁** is an **NMOS** transistor with its source grounded and drain connected to the output.\n- **M₂** is a **PMOS** transistor with its source connected to \\(V_{DD}\\) and drain connected to the output.\n- The gates of both transistors are tied together at the input \\(V_{in}\\).\n- Output is taken at the common drain node \\(V_{out}\\).\n\nThis is the classic **CMOS NOT gate**: a high input gives a low output, and a low input gives a high output.\n\n---\n\n### 2. Terminal voltages\n\n| Transistor | Gate–Source | Drain–Source |\n|------------|-------------|--------------|\n| M₁ (NMOS) | \\(V_{GS1}=V_{in}\\) | \\(V_{DS1}=V_{out}\\) |\n| M₂ (PMOS) | \\(V_{SG2}=V_{DD}-V_{in}\\) | \\(V_{SD2}=V_{DD}-V_{out}\\) |\n\nLet:\n- \\(V_{THN}\\) = NMOS threshold voltage (positive)\n- \\(|V_{THP}|\\) = PMOS threshold magnitude (positive)\n\n---\n\n### 3. DC operating regions\n\n| Input range | M₁ (NMOS) | M₂ (PMOS) | Output |\n|---|---|---|---|\n| \\(V_{in} < V_{THN}\\) | OFF | ON | \\(V_{out} \\approx V_{DD}\\) (logic HIGH) |\n| \\(V_{in} > V_{DD}-|V_{THP}|\\) | ON | OFF | \\(V_{out} \\approx 0\\) (logic LOW) |\n| Intermediate region | ON | ON | Transition region; \\(V_{out}\\) falls sharply |\n\nWhen one transistor is off, the static current is essentially zero, giving the CMOS inverter its very low static power dissipation.\n\n---\n\n### 4. Voltage transfer characteristic (VTC)\n\nThe output switches from \\(V_{DD}\\) to 0 as \\(V_{in}\\) increases.\n\nFor \\(0 < V_{in} < V_{THN}\\):  \n\\(V_{out} = V_{DD}\\).\n\nFor \\(V_{in} > V_{DD}-|V_{THP}|\\):  \n\\(V_{out} = 0\\).\n\nIn the transition region, both devices conduct. If both are assumed in saturation, equating their drain currents gives the **switching threshold** \\(V_M\\), defined as the point where \\(V_{in}=V_{out}\\).\n\n\\[\n\\frac{1}{2}k_n(V_M-V_{THN})^2\n=\n\\frac{1}{2}k_p(V_{DD}-V_M-|V_{THP}|)^2\n\\]\n\nwhere \\(k = \\mu C_{ox}\\frac{W}{L}\\). Solving,\n\n\\[\nV_M =\n\\frac{V_{DD}-|V_{THP}|+\\sqrt{k_n/k_p}\\,V_{THN}}\n{1+\\sqrt{k_n/k_p}}\n\\]\n\nIf the inverter is **symmetrically designed** so that \\(k_n=k_p\\) and \\(V_{THN}=|V_{THP}|\\), then\n\n\\[\nV_M = \\frac{V_{DD}}{2}\n\\]\n\nThis gives equal noise margins and a centered switching point.\n\n---\n\n### 5. Noise margins\n\nNoise margins quantify how much noise the gate can tolerate:\n\n\\[\nNM_L = V_{IL}-0 \\approx V_{IL}\n\\]\n\n\\[\nNM_H = V_{DD}-V_{IH}\n\\]\n\nBecause the CMOS VTC has a very steep transition region, the inverter has large noise margins, making it robust in digital systems.\n\n---\n\n### 6. Small-signal behavior\n\nIf the inverter is biased in its transition region, it acts as a **high-gain inverting amplifier**.\n\nThe small-signal voltage gain is approximately\n\n\\[\nA_v = - (g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})\n\\]\n\nBoth transistors contribute transconductance because the input drives both gates. Since both output resistances appear in parallel, the gain can be very large, which is why CMOS inverters are also used as analog amplifiers and as the basis for ring oscillators.\n\n---\n\n### 7. Dynamic performance\n\nA load capacitance \\(C_L\\) at \\(V_{out}\\) determines the switching speed:\n\n- **High-to-low transition** (\\(t_{PHL}\\)): M₁ discharges \\(C_L\\).\n- **Low-to-high transition** (\\(t_{PLH}\\)): M₂ charges \\(C_L\\).\n\nThe propagation delays are roughly\n\n\\[\nt_{PHL} \\approx \\frac{C_L V_{DD}}{2 I_{Dn,\\text{sat}}}\n\\]\n\n\\[\nt_{PLH} \\approx \\frac{C_L V_{DD}}{2 I_{Dp,\\text{sat}}}\n\\]\n\nBy sizing \\(\\frac{W}{L}\\) of the PMOS larger than that of the NMOS (typically about \\(2\\times\\) to \\(3\\times\\)), the delays can be balanced because holes have lower mobility than electrons.\n\n---\n\n### 8. Power dissipation\n\nThe main power components are:\n\n1. **Dynamic (switching) power:**\n\\[\nP_{\\text{dyn}} = \\alpha C_L V_{DD}^2 f\n\\]\nwhere \\(\\alpha\\) is the switching activity factor and \\(f\\) is the clock frequency.\n\n2. **Short-circuit power:** A small current flows through both transistors during transitions.\n\n3. **Leakage power:** Subthreshold and gate leakage in modern devices.\n\nStatic power is ideally zero because no direct path from \\(V_{DD}\\) to ground exists in steady state.\n\n---\n\n### Summary\n\nThe circuit is a **CMOS inverter**, a fundamental digital building block. It provides:\n\n- Rail-to-rail output swing (\\(0\\) to \\(V_{DD}\\))\n- Very low static power consumption\n- High noise margins\n- Large small-signal gain in the transition region\n- Switching speed controlled by transistor sizing and load capacitance",
        "format": "markdown",
        "sha256": "3f9c939eb247dc01770bb0ff3d8e0af6871cf2143ce7ef832bc96c22082ccfde"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down, PMOS pull-up, and shared input and output nodes. Its operation is described correctly; optional analog analysis is not required for full credit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 67,
        "input_tokens": 313,
        "output_tokens": 2605,
        "total_tokens": 2918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 67,
        "input_tokens": 313,
        "output_tokens": 2605,
        "total_tokens": 2918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter** (a NOT gate).  \n- \\(M_1\\) is the **PMOS pull‑up** transistor: source to \\(V_{DD}\\), drain to \\(V_{out}\\).  \n- \\(M_2\\) is the **NMOS pull‑down** transistor: source to ground, drain to \\(V_{out}\\).  \n- The two gates are tied together to \\(V_{in}\\).\n\nThe output is the logical complement of the input:\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\n---\n\n### 1. Static Operation\n\n| \\(V_{in}\\) | \\(M_1\\) (PMOS) | \\(M_2\\) (NMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low (\\(\\approx 0\\)) | ON | OFF | High \\(\\approx V_{DD}\\) |\n| High (\\(\\approx V_{DD}\\)) | OFF | ON | Low \\(\\approx 0\\) |\n\nBecause one transistor is always off in a steady state, the static (quiescent) current is ideally **zero**, except for small leakage currents.\n\n---\n\n### 2. Voltage Transfer Characteristic (VTC)\n\nThe inverter VTC has three main regions:\n\n1. **Low input:** \\(V_{in}<V_{tn}\\)  \n   - NMOS is off, PMOS is on.  \n   - \\(V_{out}\\approx V_{DD}\\).\n\n2. **Transition region:** \\(V_{tn}<V_{in}<V_{DD}-|V_{tp}|\\)  \n   - Both transistors are saturated.  \n   - A small change in \\(V_{in}\\) produces a large change in \\(V_{out}\\) → **high voltage gain**.\n\n3. **High input:** \\(V_{in}>V_{DD}-|V_{tp}|\\)  \n   - PMOS is off, NMOS is on.  \n   - \\(V_{out}\\approx 0\\).\n\nThe **switching threshold** \\(V_M\\) (where \\(V_{in}=V_{out}\\)) is found by equating the saturated drain currents:\n\n\\[\n\\frac{\\beta_n}{2}(V_M-V_{tn})^2\n=\n\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{tp}|)^2\n\\]\n\n\\[\nV_M=\n\\frac{V_{DD}-|V_{tp}|+\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,V_{tn}}\n{1+\\sqrt{\\frac{\\beta_n}{\\beta_p}}}\n\\]\n\nwhere \\(\\beta_n=\\mu_n C_{ox}(W/L)_n\\) and \\(\\beta_p=\\mu_p C_{ox}(W/L)_p\\).\n\nFor a **matched, symmetric** inverter (\\(\\beta_n=\\beta_p\\), \\(V_{tn}=|V_{tp}|\\)):\n\n\\[\nV_M=\\frac{V_{DD}}{2}\n\\]\n\n---\n\n### 3. Noise Margins\n\nFor an ideal inverter:\n\n\\[\nV_{OH}=V_{DD},\\qquad V_{OL}=0\n\\]\n\nFor a matched inverter with threshold \\(V_t\\):\n\n\\[\nV_{IL}\\approx \\frac{3V_{DD}+2V_t}{8},\\qquad\nV_{IH}\\approx \\frac{5V_{DD}-2V_t}{8}\n\\]\n\n\\[\nNM_L=V_{IL}-V_{OL},\\qquad\nNM_H=V_{OH}-V_{IH}\n\\]\n\nCMOS inverters therefore have large noise margins, which is one reason they are so robust.\n\n---\n\n### 4. Small‑Signal Gain\n\nIf the inverter is biased in the high‑gain transition region (both transistors saturated), the small‑signal voltage gain is:\n\n\\[\nA_v=-(g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2})\n\\]\n\n- \\(g_{m1}, g_{m2}\\): transconductances of PMOS and NMOS.  \n- \\(r_{o1}, r_{o2}\\): output resistances.\n\nThe two transconductances add because both devices work together to pull the output down (or up) when the input rises.\n\n---\n\n### 5. Dynamic/Power Behavior\n\n- **No static power** is consumed in ideal CMOS.  \n- **Dynamic power** occurs when the output switches and the load capacitance \\(C_L\\) is charged/discharged:\n\n\\[\nP_{dyn}=\\alpha C_L V_{DD}^2 f\n\\]\n\nwhere \\(\\alpha\\) is the activity factor and \\(f\\) is the switching frequency.  \n- Propagation delays are set by how fast the PMOS charges \\(C_L\\) (\\(t_{PLH}\\)) and the NMOS discharges it (\\(t_{PHL}\\)).\n\n---\n\n### Summary\n\nThe circuit is the fundamental **CMOS inverter**. It provides:\n\n- Rail‑to‑rail output swing: \\(0\\) to \\(V_{DD}\\).\n- Very low static power dissipation.\n- High noise immunity.\n- High small‑signal gain around the switching threshold.\n\nIt is the building block of nearly all digital CMOS logic gates.",
        "format": "markdown",
        "sha256": "ea5a55630ad9869966d563756b3d5ac4e8d5a100538793de05b3f29372adc797"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution explicitly assigns 0 for either error.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 321,
        "output_tokens": 5311,
        "total_tokens": 5632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 321,
        "output_tokens": 5311,
        "total_tokens": 5632,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: CMOS Inverter\n\nThe circuit shown is a **CMOS inverter** (also called a **NOT gate**), which is the most fundamental building block in digital integrated circuits.\n\n## 1. Circuit Topology\n\n- **$M_1$**: PMOS transistor (pull-up network)\n  - Source → $V_{DD}$\n  - Drain → $V_{out}$\n  - Gate → $V_{in}$\n\n- **$M_2$**: NMOS transistor (pull-down network)\n  - Source → Ground\n  - Drain → $V_{out}$\n  - Gate → $V_{in}$\n\nBoth transistors share a common gate input and a common drain output.\n\n---\n\n## 2. DC Operation / Logic Function\n\n| Input $V_{in}$ | PMOS $M_1$ | NMOS $M_2$ | Output $V_{out}$ | State |\n|---|---|---|---|---|\n| $0$ (Logic LOW) | **ON** | **OFF** | $V_{DD}$ (Logic HIGH) | Pull-up |\n| $V_{DD}$ (Logic HIGH) | **OFF** | **ON** | $0$ (Logic LOW) | Pull-down |\n\n**Logical function:**\n$$V_{out} = \\overline{V_{in}}$$\n\nThus, this circuit inverts the input signal.\n\n---\n\n## 3. Key Characteristics\n\n### (a) Static Power Dissipation\nIn steady state (either HIGH or LOW input), **one transistor is always OFF**, creating an open path between $V_{DD}$ and ground. Therefore:\n\n$$I_{DD} \\approx 0$$\n\nThis results in **negligible static power consumption**, which is the main advantage of CMOS over older technologies like NMOS or bipolar logic.\n\n### (b) Dynamic Power Dissipation\nPower is consumed only during switching, when:\n- The output capacitance $C_L$ is charged/discharged.\n- Both transistors may briefly conduct simultaneously, causing a short-circuit current.\n\n$$P_{dynamic} \\approx C_L V_{DD}^2 f$$\n\nwhere $f$ is the switching frequency.\n\n### (c) Full Rail-to-Rail Swing\nThe output can swing fully from:\n- $V_{OH} = V_{DD}$ (output high)\n- $V_{OL} = 0$ (output low)\n\n---\n\n## 4. Voltage Transfer Characteristic (VTC)\n\nThe VTC plots $V_{out}$ vs. $V_{in}$ and has five regions:\n\n| Region | $V_{in}$ Range | $M_1$ | $M_2$ | Behavior |\n|---|---|---|---|---|\n| A | $V_{in} < V_{THN}$ | Linear | Cutoff | $V_{out} = V_{DD}$ |\n| B | $V_{THN} < V_{in} < V_M$ | Linear | Saturation | $V_{out}$ begins to drop |\n| C | $V_{in} \\approx V_M$ | Saturation | Saturation | Steepest gain (high gain) |\n| D | $V_M < V_{in} < V_{DD}-|V_{THP}|$ | Saturation | Linear | $V_{out}$ drops sharply |\n| E | $V_{in} > V_{DD}-|V_{THP}|$ | Cutoff | Linear | $V_{out} = 0$ |\n\nThe **switching threshold** $V_M$ (where $V_{in} = V_{out}$) is approximately:\n\n$$V_M \\approx \\frac{V_{DD} + V_{THP} + \\sqrt{\\beta}V_{THN}}{1 + \\sqrt{\\beta}}$$\n\nwhere:\n\n$$\\beta = \\frac{\\mu_n C_{ox}(W/L)_n}{\\mu_p C_{ox}(W/P)_p}$$\n\nFor a symmetric inverter with $V_M = V_{DD}/2$, the PMOS must usually be **wider** than the NMOS because electron mobility $\\mu_n$ is greater than hole mobility $\\mu_p$.\n\n---\n\n## 5. Small-Signal Gain in Transition\n\nIn region C, both transistors operate in saturation, and the small-signal voltage gain is:\n\n$$A_v = -(g_{m1} + g_{m2})(r_{o1} \\parallel r_{o2})$$\n\nThis gain is typically large, giving the inverter a **sharp switching characteristic** and good noise immunity.\n\n---\n\n## 6. Noise Margins\n\nGood noise margins arise from the steep VTC:\n\n- **Noise Margin HIGH**: $NM_H = V_{OH} - V_{IH}$\n- **Noise Margin LOW**: $NM_L = V_{IL} - V_{OL}$\n\nWith proper transistor sizing, CMOS inverters achieve robust noise immunity.\n\n---\n\n## Summary\n\n| Feature | CMOS Inverter |\n|---|---|\n| Function | Inverter / NOT gate |\n| Static power | Very low |\n| Output swing | Full rail-to-rail ($0$ to $V_{DD}$) |\n| Switching | Sharp transition, high noise margin |\n| Key advantage | Negligible static power dissipation |\n\nThis circuit is the cornerstone of nearly all modern digital logic design.",
        "format": "markdown",
        "sha256": "a45650853b15e4d3d3207dc8e3716196c2b3334feff6e136836035ce3a29ac66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires identifying both devices as NMOS; either error requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 321,
        "output_tokens": 2278,
        "total_tokens": 2599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 321,
        "output_tokens": 2278,
        "total_tokens": 2599,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: CMOS Inverter\n\nThe circuit shown is a **CMOS inverter**, the fundamental building block of digital CMOS logic. It consists of two complementary MOSFETs:\n\n- **M₁**: PMOS transistor (pull-up) with source connected to **VDD**\n- **M₂**: NMOS transistor (pull-down) with source connected to **GND**\n\nBoth gates are tied to **Vᵢₙ**, and both drains are tied to **Vₒᵤₜ**.\n\n---\n\n## 1. Basic Operation\n\nThe inverter produces a logic output that is the **opposite** of the input:\n\n| **Vᵢₙ** | M₁ (PMOS) | M₂ (NMOS) | **Vₒᵤₜ** |\n|--------|-----------|-----------|----------|\n| 0 V (Logic 0) | ON | OFF | VDD (Logic 1) |\n| VDD (Logic 1) | OFF | ON | 0 V (Logic 0) |\n\n### When Vᵢₙ = 0:\n- M₂ has VGS = 0, so it is **OFF**\n- M₁ has VGS = −VDD, so it is **ON**\n- Vₒᵤₜ is pulled up to **VDD**\n\n### When Vᵢₙ = VDD:\n- M₂ has VGS = VDD, so it is **ON**\n- M₁ has VGS = 0, so it is **OFF**\n- Vₒᵤₜ is pulled down to **0 V**\n\nImportantly, **M₁ and M₂ are never both ON simultaneously** in steady state.\n\n---\n\n## 2. Key Characteristics\n\n- **Rail-to-rail output swing**: Vₒᵤₜ swings fully from 0 to VDD\n- **No static power dissipation**: Since one transistor is always OFF in steady state, no direct DC path exists from VDD to GND\n- **High noise margins**: The switching transition is sharp, providing good immunity to noise\n- **Dynamic power only**: Power is consumed mainly during switching transitions:  \n  $$P_{dynamic} = f \\cdot C_L \\cdot V_{DD}^2$$\n\n---\n\n## 3. Voltage Transfer Characteristic (VTC)\n\nThe VTC has roughly five regions:\n\n1. **Vᵢₙ < Vₜₕₙ**: NMOS off, PMOS on → Vₒᵤₜ = VDD\n2. **Vᵢₙ ≈ Vₜₕₙ**: NMOS enters saturation, PMOS in triode\n3. **Midpoint**: Both transistors in saturation → steep transition\n4. **Vᵢₙ ≈ VDD − |Vₜₕₚ|**: NMOS in triode, PMOS in saturation\n5. **Vᵢₙ > VDD − |Vₜₕₚ|**: PMOS off, NMOS on → Vₒᵤₜ = 0\n\nThe switching threshold **V_M** (where Vᵢₙ = Vₒᵤₜ) depends on the relative strengths of the NMOS and PMOS transistors.\n\n---\n\n## Summary\n\nThis is the classic **CMOS inverter**. It inverts the input signal with **zero static power consumption**, **full output voltage swing**, and **high noise immunity**, making it the cornerstone of modern digital integrated circuits.",
        "format": "markdown",
        "sha256": "e0a24bc1f85190b874df7c7d1b65b8f78981649601750602d03ab803628ae80b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as an ordinary CMOS inverter; both errors trigger the golden solution’s non-negotiable zero-score rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 1351,
        "total_tokens": 1670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 319,
        "output_tokens": 1351,
        "total_tokens": 1670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 650,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Diode-Connected PMOS Load Inverter\n\n## 1. Circuit Identification\n\nThis is a **single-ended common-source amplifier** with a **diode-connected PMOS active load** (also called a PMOS-diode load inverter or active-load inverter).\n\n- **M₁**: NMOS transistor — input device (gate = $V_{in}$, source = GND, drain = $V_{out}$)\n- **M₂**: PMOS transistor — load device with gate shorted to drain, forming a **diode-connected MOS**\n\n> Note: This is **not** a standard CMOS inverter. In a standard CMOS inverter, the PMOS gate would also be driven by $V_{in}$. Here, the PMOS gate is tied to its drain, so $M_2$ is always ON and behaves as a nonlinear resistor.\n\n---\n\n## 2. DC Operation / Voltage Transfer Characteristic\n\nSince $M_2$ is diode-connected:\n- $V_{SG2} = V_{SD2}$ always\n- $M_2$ automatically satisfies $V_{SD2} \\ge V_{SG2} - |V_{thp}|$, so it is **always in saturation**\n\nThe current through $M_2$ is:\n\n$$I_{D2} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 \\left(V_{DD} - V_{out} - |V_{thp}|\\right)^2$$\n\n### Key DC points:\n\n| Region | Condition | Behavior | Output |\n|--------|-----------|----------|--------|\n| **Output High** | $V_{in} \\approx 0$, $M_1$ OFF | $I_{D1}=0 \\Rightarrow I_{D2}=0$ | $V_{OH} = V_{DD} - |V_{thp}|$ |\n| **Transition** | $V_{in} \\approx V_{thn}$ | $M_1$ begins conducting | Both transistors in saturation |\n| **Output Low** | $V_{in} = V_{DD}$, $M_1$ strongly ON | $M_1$ in triode, $M_2$ in saturation | $V_{OL}$ determined by current balance |\n\n**Important**: Unlike a standard CMOS inverter or resistive-load inverter, the output **cannot reach $V_{DD}$**. The maximum output is reduced by one PMOS threshold voltage.\n\n---\n\n## 3. Small-Signal Voltage Gain\n\nFor small-signal analysis:\n\n- The diode-connected PMOS provides an equivalent resistance of approximately $1/g_{m2}$ in parallel with $r_{o2}$\n- The NMOS provides transconductance $g_{m1}$ and output resistance $r_{o1}$\n\nThe small-signal voltage gain is:\n\n$$A_v = -g_{m1} \\cdot R_{out}$$\n\nwhere\n\n$$R_{out} = \\left(\\frac{1}{g_{m2}} \\parallel r_{o2}\\right) \\parallel r_{o1}$$\n\nNeglecting channel-length modulation ($r_o \\to \\infty$):\n\n$$\\boxed{A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}}$$\n\nSo the gain depends on the **square root of the mobility ratio and sizing ratio**. Since $\\mu_n \\approx 2-3\\mu_p$, the NMOS can be sized smaller than the PMOS for a given gain magnitude.\n\n---\n\n## 4. Key Characteristics\n\n| Feature | Behavior |\n|--------|----------|\n| **Output swing** | Asymmetric; $V_{OH} = V_{DD} - \\|V_{thp}\\|$, limited low output |\n| **Static power** | **Consumes static power** when output is low (both transistors conduct) |\n| **Area efficiency** | More compact than a physical resistor |\n| **Noise margins** | Asymmetric due to active load |\n| **Gain** | Moderate, typically less than a standard CMOS inverter |\n| **Speed** | Limited by the load capacitance and effective load resistance $1/g_{m2}$ |\n\n---\n\n## 5. Summary\n\nThis circuit is a **common-source amplifier with a diode-connected PMOS active load**. It trades output swing and static power dissipation for area efficiency and moderate voltage gain. It is commonly used as a simple gain stage or inverter in analog/digital circuit designs where rail-to-rail output swing and zero static power are not required.",
        "format": "markdown",
        "sha256": "ec28d2ca842cff91e6cf00fc0ed072c06381161a9c1a2af057d6e794a1af417c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including a consistent expression with both devices’ output resistances.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 2615,
        "total_tokens": 3402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1643,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 787,
        "output_tokens": 2615,
        "total_tokens": 3402,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1643,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common‑source (CS) amplifier with a diode‑connected PMOS active load**.\n\n* **M₁** is the NMOS amplifying (driver) transistor. Its gate is driven by \\(V_{in}\\), its source is grounded, and its drain is the output node.\n* **M₂** is a PMOS transistor whose **gate is shorted to its drain** (the output node). With its source tied to \\(V_{DD}\\), it acts as a **diode‑connected PMOS load**.\n\nThis is not a standard CMOS inverter: in a CMOS inverter the PMOS gate is driven by the same input, whereas here the PMOS gate is tied to the output.\n\n---\n\n## 1. DC / Large‑Signal Behavior\n\nDefine:\n\n* NMOS threshold: \\(V_{THN}\\)\n* PMOS magnitude threshold: \\(|V_{THP}|\\)\n* Transconductance factors:\n  \\[\n  k_n=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1,\\qquad\n  k_p=\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2\n  \\]\n\n### Region 1: \\(V_{in}<V_{THN}\\)\nM₁ is off. Since no current flows through M₂, the diode‑connected PMOS sits with\n\\[\nV_{SG2}\\approx |V_{THP}|\n\\]\nso\n\\[\nV_{out}\\approx V_{DD}-|V_{THP}|\n\\]\n\nThe output **cannot reach \\(V_{DD}\\)** because M₂ needs at least \\(|V_{THP}|\\) source‑to‑gate voltage.\n\n### Region 2: Both transistors saturated\nFor \\(V_{in}>V_{THN}\\) and \\(V_{out}\\ge V_{in}-V_{THN}\\), M₁ is in saturation. M₂ is always saturated because it is diode connected.\n\nIgnoring channel‑length modulation:\n\\[\n\\frac{1}{2}k_n(V_{in}-V_{THN})^2\n=\n\\frac{1}{2}k_p\\bigl(V_{DD}-V_{out}-|V_{THP}|\\bigr)^2\n\\]\n\nSolving for \\(V_{out}\\):\n\\[\n\\boxed{\nV_{out}=V_{DD}-|V_{THP}|-\\sqrt{\\frac{k_n}{k_p}}\\,(V_{in}-V_{THN})\n}\n\\]\n\nThis is the **amplifying region**: the transfer characteristic is approximately linear with slope\n\\[\n\\frac{dV_{out}}{dV_{in}}\\approx -\\sqrt{\\frac{k_n}{k_p}}\n\\]\n\nThe boundary into M₁ triode occurs when\n\\[\nV_{out}=V_{in}-V_{THN}\n\\]\n\n### Region 3: M₁ in triode\nFor large \\(V_{in}\\), M₁ enters the triode region and the output is pulled low:\n\\[\nk_n\\Bigl[(V_{in}-V_{THN})V_{out}-\\frac{V_{out}^2}{2}\\Bigr]\n=\n\\frac{1}{2}k_p\\bigl(V_{DD}-V_{out}-|V_{THP}|\\bigr)^2\n\\]\n\nAs \\(V_{in}\\to\\infty\\), \\(V_{out}\\to 0\\).\n\n---\n\n## 2. Small‑Signal Analysis\n\nThe small‑signal equivalent has:\n\n* A transconductance current source \\(g_{m1}v_{in}\\) from M₁ drain to ground.\n* The diode‑connected PMOS M₂ appears as an effective resistance \\(1/g_{m2}\\) in parallel with its output resistance \\(r_{o2}\\).\n* M₁ output resistance \\(r_{o1}\\) also appears at the output.\n\nApplying KCL at the output (with no external load):\n\\[\ng_{m1}v_{in}+v_{out}\\left(g_{m2}+g_{o1}+g_{o2}\\right)=0\n\\]\n\nHence the voltage gain is\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_{m1}}{g_{m2}+g_{o1}+g_{o2}}\n\\approx -\\frac{g_{m1}}{g_{m2}}\n}\n\\]\n\nUsing \\(g_m=\\sqrt{2\\mu C_{ox}(W/L)I_D}\\), the gain depends only on device sizing and mobilities:\n\\[\n\\boxed{\nA_v\\approx -\\sqrt{\n\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}\n}\n}\n\\]\n\n### Output resistance\n\\[\n\\boxed{\nR_{out}\\approx \\frac{1}{g_{m2}}\\parallel r_{o1}\\parallel r_{o2}\n\\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nThe diode load makes the output resistance relatively low.\n\n### Input resistance\nIdeally infinite, limited in practice by gate leakage and layout parasitics.\n\n---\n\n## 3. Frequency Response\n\nThe dominant pole is usually at the output node because \\(R_{out}\\) is small:\n\\[\nf_{p,out}\\approx \\frac{1}{2\\pi R_{out}C_{out}}\n\\]\nwhere\n\\[\nC_{out}=C_{db1}+C_{db2}+C_{gs2}+C_{gd1}(1-A_v^{-1})+C_L\n\\]\n\nBecause the gain is inverting, the gate‑drain capacitance of M₁ produces Miller multiplication at the input:\n\\[\nC_{in}\\approx C_{gs1}+C_{gd1}(1+|A_v|)\n\\]\n\nIf driven by a finite source resistance \\(R_S\\), an input pole also appears:\n\\[\nf_{p,in}\\approx \\frac{1}{2\\pi R_S C_{in}}\n\\]\n\nOverall, the diode‑loaded CS stage trades gain for bandwidth compared with a current‑source load.\n\n---\n\n## 4. Key Design Trade‑offs\n\n| Feature | Behavior |\n|---|---|\n| **Gain** | Set by transistor sizing: \\(|A_v|\\approx\\sqrt{k_n/k_p}\\). High gain requires a wide NMOS or a weak PMOS. |\n| **Output swing high** | Limited to roughly \\(V_{DD}-|V_{THP}|\\). |\n| **Output swing low** | Can approach ground for large \\(V_{in}\\). |\n| **Output resistance** | Low, \\(\\approx 1/g_{m2}\\), giving good bandwidth but poor load drive if high gain is needed. |\n| **Power** | Class‑A: static current flows whenever M₁ is on. |\n| **Linearity** | Moderate; limited to the region where both devices are saturated. |\n\n---\n\n## 5. Typical Use\n\nThis topology is commonly used as:\n\n* A simple **gain stage** in analog CMOS design.\n* An **active load** replacing a physical resistor in a common‑source amplifier.\n* A high‑bandwidth but modest‑gain stage, e.g., in RF or high‑speed op‑amp front ends.\n\nIn summary, the circuit is a **common‑source amplifier with a diode‑connected PMOS load**, giving inverting gain roughly equal to the square root of the driver‑to‑load transconductance ratio, low output resistance, and limited high‑side output swing.",
        "format": "markdown",
        "sha256": "da9a771c6fd722d8e3acee3e1b00de80e8c82f21c753589dfe3ed5b8a115affb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS common-source stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation included consistently for both devices. The sizing-based gain relation is also correct.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 787,
        "output_tokens": 6621,
        "total_tokens": 7408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 787,
        "output_tokens": 6621,
        "total_tokens": 7408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5048,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-source (CS) gain stage with a diode-connected PMOS active load**.\n\n### 1. Topology identification\n| Device | Type | Connections |\n|---|---|---|\n| **M₁** | **NMOS** | Source → ground, Gate → \\(V_{in}\\), Drain → \\(V_{out}\\) |\n| **M₂** | **PMOS** | Source → \\(V_{DD}\\), Drain → \\(V_{out}\\), **Gate shorted to \\(V_{out}\\)** |\n\nBecause the PMOS gate is tied to its drain, **M₂ is diode-connected**. It therefore behaves as a **small-signal resistor** rather than as a switching load. This is not the same as a CMOS inverter: in a CMOS inverter the PMOS gate would also be driven by \\(V_{in}\\). Here the PMOS is an active load.\n\n---\n\n### 2. DC / large-signal behavior\n\nNeglect channel-length modulation (\\(\\lambda \\approx 0\\)) and body effect.\n\n- For M₁ (NMOS) in saturation:\n\\[\nI_{D1}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{in}-V_{THN})^2\n\\]\n\n- For M₂ (PMOS), since its gate and drain are both at \\(V_{out}\\):\n\\[\nV_{SG2}=V_{SD2}=V_{DD}-V_{out}\n\\]\nIf M₂ is on and saturated,\n\\[\nI_{D2}=\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD}-V_{out}-|V_{THP}|)^2\n\\]\n\nIn DC, \\(I_{D1}=I_{D2}\\). Let\n\\[\nK=\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}\n\\]\nThen in the region where both transistors are saturated:\n\\[\nV_{out}=V_{DD}-|V_{THP}|-\\sqrt{K}\\,(V_{in}-V_{THN})\n\\]\n\nSo the **DC voltage gain magnitude** in that region is\n\\[\n|A_v|=\\frac{dV_{out}}{dV_{in}}=\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\n\\]\n\nThe output is **inverted**: increasing \\(V_{in}\\) lowers \\(V_{out}\\).\n\n---\n\n### 3. Small-signal analysis\n\nUse the small-signal model:\n\n- M₁ acts as a transconductance current source \\(g_{m1}v_{in}\\) sinking current to ground.\n- The diode-connected PMOS M₂ presents an equivalent resistance of approximately\n\\[\nR_{M2}\\approx \\frac{1}{g_{m2}}\n\\]\nbetween \\(V_{out}\\) and AC ground (\\(V_{DD}\\)).\n- Include output resistances \\(r_{o1}\\), \\(r_{o2}\\), so\n\\[\nR_{out}=r_{o1}\\parallel r_{o2}\\parallel \\frac{1}{g_{m2}}\n\\]\n\nNormally \\(1/g_{m2} \\ll r_o\\), so\n\\[\nR_{out}\\approx \\frac{1}{g_{m2}}\n\\]\n\nThe small-signal voltage gain is therefore\n\\[\nA_v=\\frac{v_{out}}{v_{in}}=-g_{m1}R_{out}\n\\]\n\nor simply\n\\[\n\\boxed{A_v\\approx -\\frac{g_{m1}}{g_{m2}}}\n\\]\n\nIn terms of device sizing and drain current,\n\\[\n\\frac{g_{m1}}{g_{m2}}\n=\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\n\\]\n\n---\n\n### 4. Operating region constraints\n\nFor high-gain operation, both transistors should be in saturation:\n\n- M₁ in saturation: \\(V_{out} > V_{in}-V_{THN}\\)\n- M₂ in saturation: automatically satisfied if \\(V_{DD}-V_{out} > |V_{THP}|\\), i.e.\n  \\[\n  V_{out} < V_{DD}-|V_{THP}|\n  \\]\n\nThe usable output swing is roughly\n\\[\nV_{in}-V_{THN} < V_{out} < V_{DD}-|V_{THP}|\n\\]\n\nIn a typical analog application, you bias \\(V_{in}\\) somewhere in the middle of the transition so these conditions are met.\n\n---\n\n### 5. Dynamic performance\n\nIf a load capacitance \\(C_L\\) is present at \\(V_{out}\\), the dominant pole is\n\n\\[\nf_{p}\\approx \\frac{1}{2\\pi R_{out}C_L}\n\\approx \\frac{g_{m2}}{2\\pi C_L}\n\\]\n\nThe unity-gain bandwidth is\n\n\\[\nf_t \\approx \\frac{g_{m1}}{2\\pi C_L}\n\\]\n\nNote that\n\n\\[\n\\text{Gain}\\times\\text{Bandwidth}\n= \\frac{g_{m1}}{g_{m2}}\\cdot \\frac{g_{m2}}{2\\pi C_L}\n= \\frac{g_{m1}}{2\\pi C_L}\n\\]\n\nSo the gain-bandwidth product is determined mainly by M₁.\n\n---\n\n### 6. Summary\n\n| Parameter | Expression (approx.) |\n|---|---|\n| Configuration | Common-source amplifier with diode-connected PMOS load |\n| DC load line | Set by \\(I_{D1}=I_{D2}\\); \\(V_{out}\\) self-biases |\n| Voltage gain | \\(\\boxed{A_v\\approx -\\dfrac{g_{m1}}{g_{m2}}=-\\sqrt{\\dfrac{\\mu_n(W/L)_1}{\\mu_p(W/L)_2}}}\\) |\n| Output resistance | \\(R_{out}\\approx 1/g_{m2}\\) |\n| Sign | Inverting |\n| Best use | Small-signal analog amplifier; not a rail-to-rail digital inverter |\n\nThis topology trades voltage gain for lower output resistance and moderate bandwidth. The gain can be adjusted primarily by changing the \\(W/L\\) ratio of M₁ relative to M₂.",
        "format": "markdown",
        "sha256": "923e30760b62936c6a935387b4c95249bbfeac5fb0cee6c5cefb0c3017c29a75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain \\(A_v\\approx-g_{m1}/g_{m2}\\), satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 789,
        "output_tokens": 5118,
        "total_tokens": 5907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 789,
        "output_tokens": 5118,
        "total_tokens": 5907,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-stage common-source (CS) amplifier** with a PMOS input device and a depletion-mode NMOS load.\n\n- **M₂** is a **PMOS** transistor: its source is at \\(V_{DD}\\) (the arrow is on the higher-potential terminal), its gate is driven by \\(V_{in}\\), and its drain is the output node.\n- **M₁** is an **NMOS** transistor: its source is grounded, its drain is the output node, and its gate is also grounded. For the circuit to conduct a DC current, **M₁ must be a depletion-mode (normally-on) device**; with \\(V_{GS1}=0\\), an enhancement NMOS would be off and the circuit would not have a useful operating point.\n\nThus M₂ is the amplifying transistor and M₁ acts as a **current-source load**.\n\n---\n\n## 1. DC operating point\n\nAssume both transistors are in saturation and use the square-law model:\n\n\\[\nI_{D1}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1\n\\bigl(0-V_{TH1}\\bigr)^2\\bigl(1+\\lambda_n V_{out}\\bigr)\n\\]\n\nwhere \\(V_{TH1}<0\\) for a depletion NMOS, so \\(-V_{TH1}=|V_{TH1}|\\).\n\n\\[\nI_{D2}=\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\bigl(V_{SG2}-|V_{THp}|\\bigr)^2\n\\bigl(1+\\lambda_p(V_{DD}-V_{out})\\bigr)\n\\]\n\nwith\n\n\\[\nV_{SG2}=V_{DD}-V_{in}, \\qquad V_{SD2}=V_{DD}-V_{out}.\n\\]\n\nAt DC:\n\n\\[\nI_{D1}=I_{D2}=I_D.\n\\]\n\nIf channel-length modulation is neglected (\\(\\lambda\\approx 0\\)), the bias current is set mainly by the depletion load:\n\n\\[\nI_D \\approx \\frac{1}{2}k_{n1}|V_{TH1}|^2,\n\\qquad k_{n1}=\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1,\n\\]\n\nand the PMOS overdrive is\n\n\\[\nV_{DD}-V_{in}-|V_{THp}| = |V_{TH1}|\\sqrt{\\frac{k_{n1}}{k_{p2}}}.\n\\]\n\nSo the input bias voltage is approximately\n\n\\[\nV_{in} \\approx V_{DD}-|V_{THp}|\n-|V_{TH1}|\\sqrt{\\frac{k_{n1}}{k_{p2}}}.\n\\]\n\nBecause both devices have ideally constant saturation currents, the DC output voltage is **very sensitive to device mismatch and Early effect**; in practice it is set by the finite output resistances.\n\n---\n\n## 2. Small-signal analysis\n\nFor small signals:\n\n- The PMOS source is at AC ground (\\(V_{DD}\\)).\n- M₂ provides transconductance \\(g_{m2}\\) and output resistance \\(r_{o2}\\).\n- M₁ has its gate and source at AC ground, so it contributes **only output resistance** \\(r_{o1}\\) (no \\(g_{m1}\\) term).\n\nThe small-signal equivalent at the output node is therefore:\n\n- A current source \\(g_{m2}v_{in}\\) feeding the output,\n- \\(r_{o2}\\) from the output to AC ground,\n- \\(r_{o1}\\) from the output to ground.\n\nThe two output resistances are in parallel:\n\n\\[\nR_{out}=r_{o1}\\parallel r_{o2}.\n\\]\n\nAn increase in \\(V_{in}\\) reduces the PMOS source-gate voltage, so the PMOS pulls less current from \\(V_{DD}\\). The depletion load then pulls the output down, giving an **inverting** gain:\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\n\nUsing\n\n\\[\nr_{o1}\\approx \\frac{1}{\\lambda_n I_D},\\qquad\nr_{o2}\\approx \\frac{1}{\\lambda_p I_D},\n\\]\n\nthe gain can also be written as\n\n\\[\n\\boxed{A_v\\approx -\\frac{g_{m2}}{I_D(\\lambda_n+\\lambda_p)}}\n\\]\n\nor, with \\(g_{m2}=\\sqrt{2k_{p2}I_D}\\),\n\n\\[\n|A_v|\\approx \\frac{\\sqrt{2k_{p2}/I_D}}{\\lambda_n+\\lambda_p}.\n\\]\n\nIf channel-length modulation is ignored (\\(\\lambda=0\\)), the gain would be infinite, indicating that the ideal circuit has extremely high gain and the DC output is determined by non-ideal effects.\n\n---\n\n## 3. Input and output resistances\n\n- **Input resistance:** Ideally infinite, because the gates draw no DC current.\n  \\[\n  R_{in}\\to \\infty\n  \\]\n- **Output resistance:**\n  \\[\n  \\boxed{R_{out}=r_{o1}\\parallel r_{o2}}\n  \\]\n\n---\n\n## 4. Output swing / active region\n\nFor linear amplification, both transistors should remain saturated.\n\n**M₁ (depletion NMOS):**\n\n\\[\nV_{DS1}\\ge V_{GS1}-V_{TH1}\n\\;\\Rightarrow\\;\nV_{out}\\ge |V_{TH1}|\n\\]\n\n**M₂ (PMOS):**\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{THp}|\n\\;\\Rightarrow\\;\nV_{DD}-V_{out}\\ge (V_{DD}-V_{in})-|V_{THp}|\n\\]\n\n\\[\n\\Rightarrow\\quad V_{out}\\le V_{in}+|V_{THp}|\n\\]\n\nSo the high-gain region is bounded by\n\n\\[\n\\boxed{|V_{TH1}|\\le V_{out}\\le V_{in}+|V_{THp}|}\n\\]\n\n---\n\n## 5. Summary\n\n| Quantity | Expression |\n|---|---|\n| Topology | PMOS common-source amplifier with depletion NMOS load |\n| DC current | Set mainly by M₁: \\(I_D\\approx \\frac{1}{2}k_{n1}|V_{TH1}|^2\\) |\n| Voltage gain | \\(A_v=-g_{m2}(r_{o1}\\parallel r_{o2})\\) |\n| Input resistance | \\(\\infty\\) (ideal) |\n| Output resistance | \\(r_{o1}\\parallel r_{o2}\\) |\n| High-gain output range | \\(|V_{TH1}|\\le V_{out}\\le V_{in}+|V_{THp}|\\) |\n\n**Key caveat:** As drawn, M₁ must be a **depletion-mode NMOS**; otherwise it would be off and the circuit would not function as an amplifier. The stage provides high voltage gain but a poorly defined DC output unless feedback or a deliberate bias network is used.",
        "format": "markdown",
        "sha256": "5ba481f42373b87427811e13c30caa8e536965069faa28930b6e711a98ef1f05"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M₂ as a PMOS common-source input device and predicts an inverting response, but misidentifies M₁ as a depletion NMOS. M₁ is a diode-connected PMOS load, so the proposed bias analysis and gain formula miss the central gm/gm mechanism.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1843,
        "output_tokens": 13436,
        "total_tokens": 15279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1843,
        "output_tokens": 13436,
        "total_tokens": 15279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## Circuit Topology\n\nAssuming standard MOSFET symbols, this is a **PMOS common-source amplifier with a depletion-mode NMOS load**:\n\n- **M₂**: PMOS input transistor  \n  - Source → VDD  \n  - Gate → Vᵢₙ  \n  - Drain → Vₒᵤₜ  \n\n- **M₁**: Depletion-mode NMOS load transistor  \n  - Drain → Vₒᵤₜ  \n  - Gate → Ground  \n  - Source → Ground  \n\nBecause M₁ has V_GS1 = 0, it must be a **depletion-mode NMOS** (V_th1 < 0) so that it conducts a fixed bias current. M₂ is the voltage-driven amplifying device.\n\n---\n\n## DC Operating Point\n\nIn saturation, the drain currents must be equal:\n\n$$I_{D1} = I_{D2}$$\n\nFor the depletion NMOS load (V_GS1 = 0):\n\n$$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (0 - V_{th1})^2 = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 V_{th1}^2$$\n\n(Note: V_th1 is negative, so the current is positive.)\n\nFor the PMOS driver:\n\n$$I_{D2} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{DD} - V_{in} - |V_{thp}|)^2$$\n\nEquating the two gives the required input bias voltage for a chosen current.\n\n---\n\n## Small-Signal Analysis\n\n### Small-signal model\n- M₂ contributes transconductance **g_m2** and output resistance **r_o2**.\n- M₁ has **g_m1·v_gs1 = 0** because both its gate and source are AC grounds. It contributes only **r_o1**.\n\n### Voltage gain\n\nApplying KCL at the output node:\n\n$$-g_{m2}v_{in} = v_{out}\\left(\\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}\\right)$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1} \\parallel r_{o2})}$$\n\nThe gain is **inverting** and limited by the finite output resistances of the two transistors.\n\n---\n\n## Input and Output Resistance\n\n| Quantity | Expression |\n|----------|------------|\n| Input resistance | **R_in ≈ ∞** (looking into M₂ gate) |\n| Output resistance | **R_out = r_o1 \\parallel r_o2** |\n\n---\n\n## Operating Region Constraints\n\nFor proper amplification, both transistors must remain in **saturation**:\n\n- **M₁ (depletion NMOS)**:  \n  $$V_{out} > |V_{th1}|$$\n\n- **M₂ (PMOS)**:  \n  $$V_{out} < V_{in} + |V_{thp}|$$\n\nThus the usable output swing is approximately:\n\n$$|V_{th1}| < V_{out} < V_{in} + |V_{thp}|$$\n\n---\n\n## Summary\n\n| Parameter | Result |\n|-----------|--------|\n| Topology | Common-source amplifier with depletion NMOS load |\n| Gain | $A_v = -g_{m2}(r_{o1} \\parallel r_{o2})$ |\n| Input resistance | Very high (∞ ideally) |\n| Output resistance | $r_{o1} \\parallel r_{o2}$ |\n| Phase | Inverting |\n\nThe key limitation of this topology is the relatively **low voltage gain**, since the load is just the output resistance of the depletion device rather than a high-impedance current source.",
        "format": "markdown",
        "sha256": "ec0f7d77c828c9b6c758010f122882201c079368a7e77feb331c491619152665"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as a depletion NMOS instead of a diode-connected PMOS. That changes the load and small-signal mechanism, so its output-resistance gain expression misses the essential gm/gm gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1843,
        "output_tokens": 13774,
        "total_tokens": 15617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1843,
        "output_tokens": 13774,
        "total_tokens": 15617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12948,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe circuit is a **single-ended common-source (CS) amplifier**:\n\n- **M₂** is a **PMOS** transistor. Its source is at \\(V_{DD}\\) and its drain drives the output node. The gate is the signal input, so M₂ is the amplifying (driver) device.\n- **M₁** is an **NMOS depletion-mode** transistor acting as a **current-source load**. Its gate is tied to ground, so \\(V_{GS1}=0\\). An enhancement-mode NMOS would be off with \\(V_{GS}=0\\); therefore M₁ must be a depletion device (or a deliberately biased current source).\n\nThe output \\(V_{out}\\) is taken at the common drain node, which is a high-impedance point.\n\n---\n\n## DC operating point\n\nFor M₁ (depletion NMOS, \\(V_{GS1}=0\\)):\n\n\\[\nI_{D1}= \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 V_{td}^2\n\\]\n\nwhere \\(V_{td}=|V_{th1}|\\) is the magnitude of the depletion threshold voltage. Call this constant current \\(I_0\\).\n\nFor M₂ in saturation:\n\n\\[\nI_{D2}= \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\bigl(V_{DD}-V_{in}-|V_{tp}|\\bigr)^2\n\\bigl[1+\\lambda_p(V_{DD}-V_{out})\\bigr]\n\\]\n\nAt DC balance:\n\n\\[\nI_{D1}=I_{D2}\n\\]\n\nThis relationship sets the quiescent \\(V_{out}\\) for a given \\(V_{in}\\).\n\n### Saturation conditions\n\nBoth devices must remain in saturation for high gain:\n\n- M₁: \\(\\displaystyle V_{DS1} \\ge V_{GS1}-V_{th1}=V_{td}\\)\n  \\[\n  \\boxed{V_{out} \\ge V_{td}}\n  \\]\n\n- M₂: \\(\\displaystyle V_{SD2} \\ge V_{SG2}-|V_{tp}|\\)\n  \\[\n  V_{DD}-V_{out} \\ge V_{DD}-V_{in}-|V_{tp}|\n  \\]\n  \\[\n  \\boxed{V_{out} \\le V_{in}+|V_{tp}|}\n  \\]\n\nSo the useful output swing is squeezed between \\(V_{td}\\) (from M₁) and approximately \\(V_{DD}\\) (from M₂).\n\n---\n\n## Small-signal analysis\n\nSince M₁’s gate is grounded, its small-signal gate-source voltage is zero:\n\n\\[\nv_{gs1}=0\n\\]\n\nThus M₁ contributes only its output resistance \\(r_{o1}\\), not its transconductance \\(g_{m1}\\).\n\nA small-signal model of the output node gives:\n\n- A voltage-controlled current source from M₂: \\(g_{m2}v_{gs2}\\) (or equivalently \\(g_{m2}v_{in}\\)) flowing from the output toward ground.\n- The output resistances \\(r_{o1}\\) and \\(r_{o2}\\) in parallel.\n\nTherefore:\n\n\\[\nv_{out} = -\\bigl(g_{m2}v_{in}\\bigr)(r_{o1}\\parallel r_{o2})\n\\]\n\n\\[\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\n\nThe negative sign indicates **signal inversion**: an increase in \\(V_{in}\\) reduces the PMOS current, so \\(V_{out}\\) falls.\n\n### Input and output resistances\n\n- Input resistance: ideally infinite at low frequencies (gate terminal).\n- Output resistance:\n  \\[\n  \\boxed{R_{out}=r_{o1}\\parallel r_{o2}}\n  \\]\n\nIf channel-length modulation is neglected (\\(r_{o1}, r_{o2}\\to\\infty\\)), the ideal gain becomes very large, which is characteristic of an active-loaded CS stage.\n\n---\n\n## Large-signal behavior\n\n| Input condition | M₂ state | Approximate output |\n|---|---|---|\n| \\(V_{in}\\) high (\\(\\approx V_{DD}\\)) | off | pulled low by M₁; can approach near 0 (limited by M₁ triode/depletion threshold) |\n| \\(V_{in}\\) low | strongly on | pulled high toward \\(V_{DD}\\) |\n| Intermediate (active region) | saturated | large voltage gain, \\(V_{out}\\) varies sharply with \\(V_{in}\\) |\n\nThe circuit therefore behaves like a **high-gain inverting stage** (or an inverter with a depletion load).\n\n---\n\n## Summary\n\n- **Topology:** PMOS common-source amplifier with NMOS depletion-mode current-source load.\n- **Voltage gain:** \\(\\displaystyle A_v \\approx -g_{m2}(r_{o1}\\parallel r_{o2})\\).\n- **Output resistance:** \\(\\displaystyle R_{out}=r_{o1}\\parallel r_{o2}\\).\n- **Input resistance:** very high.\n- **Main limitation:** output swing is limited by the depletion threshold \\(V_{td}\\) of M₁ and by the PMOS overdrive condition.\n\nThis is essentially a single-stage high-gain CMOS amplifier/inverter.",
        "format": "markdown",
        "sha256": "731ed45012906fd8ca9bd7b61ea37330eeb905e4a91cc503caf1ad056835a20f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes M₂ as a PMOS common-source input device, but misidentifies M₁ as a depletion NMOS current-source load. M₁ is a diode-connected PMOS load, so the proposed small-signal model and gain are wrong; the key result is the gm/gm gain, approximately −gm₂/gm₁.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1843,
        "output_tokens": 7296,
        "total_tokens": 9139,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1843,
        "output_tokens": 7296,
        "total_tokens": 9139,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking into the bottom terminal as drawn, \\(M_1\\) is a common‑gate transistor whose drain is loaded by the small‑signal resistance seen at node \\(X\\), i.e. the resistance looking into the source of \\(M_2\\).\n\nAssume both transistors are in saturation and the bias voltages \\(V_{b1},V_{b2}\\) are AC grounds. Neglect body effect for now.\n\n### 1. Resistance seen at node \\(X\\)\n\nFor \\(M_2\\), gate and drain are AC‑grounded, so it is a common‑gate device with zero drain load:\n\n\\[\nR_X = \\frac{r_{o2}}{1+g_{m2}r_{o2}}\n      \\;\\approx\\; \\frac{1}{g_{m2}}\n\\]\n\n### 2. Resistance looking into the source of \\(M_1\\)\n\nA common‑gate transistor with drain load \\(R_X\\) has source‑input resistance\n\n\\[\nR_{\\text{out}}=\\frac{r_{o1}+R_X}{1+g_{m1}r_{o1}}\n\\]\n\nSubstituting \\(R_X\\):\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{r_{o1}+\\dfrac{r_{o2}}{1+g_{m2}r_{o2}}}\n     {1+g_{m1}r_{o1}}\n}\n\\]\n\nFor \\(g_m r_o \\gg 1\\),\n\n\\[\n\\boxed{\nR_{\\text{out}}\n\\approx\n\\frac{1}{g_{m1}} + \\frac{1}{g_{m1}g_{m2}r_{o1}}\n\\approx \\frac{1}{g_{m1}}\n}\n\\]\n\nSo the output resistance is roughly \\(1/g_{m1}\\), only slightly increased by the stacked transistor \\(M_2\\).\n\n---\n\n**Note on body effect:** If the body terminals are tied to \\(V_{DD}\\) rather than to their respective sources, replace \\(g_m\\) with \\(g_m+g_{mb}\\) for the affected device:\n\n\\[\nR_X=\\frac{r_{o2}}{1+(g_{m2}+g_{mb2})r_{o2}},\\qquad\nR_{\\text{out}}=\\frac{r_{o1}+R_X}{1+(g_{m1}+g_{mb1})r_{o1}}\n\\]",
        "format": "markdown",
        "sha256": "2d209b5df2a330fbc7bcc40108bfcaa3acf72773eb95c5e89d79454d97a9d253"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats the output as a source-input resistance and incorrectly models M2 as a common-gate device. The actual output is at M1’s drain, and M1 cascodes M2, giving a high resistance approximately gm1·ro1·ro2, not 1/gm1.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2823,
        "output_tokens": 9535,
        "total_tokens": 12358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2823,
        "output_tokens": 9535,
        "total_tokens": 12358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9031,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **cascode current source**. To find the small-signal output resistance \\(R_{out}\\), treat the bias voltages \\(V_{b1}\\) and \\(V_{b2}\\) as AC grounds.\n\n- \\(M_2\\) has its gate and source at AC ground, so it simply presents its output resistance \\(r_{o2}\\) at node \\(X\\).\n- \\(M_1\\) therefore acts as a common-gate transistor with source degeneration \\(R_S = r_{o2}\\).\n\nUsing the source-degeneration resistance formula,\n\n\\[\nR_{out} = r_{o1} + R_S + g_{m1} r_{o1} R_S\n\\]\n\nwith \\(R_S = r_{o2}\\), gives\n\n\\[\n\\boxed{R_{out} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}}\n\\]\n\nSince usually \\(g_{m1} r_{o1} r_{o2} \\gg r_{o1}, r_{o2}\\),\n\n\\[\n\\boxed{R_{out} \\approx g_{m1} r_{o1} r_{o2}}\n\\]\n\nIf the body effect of \\(M_1\\) is included (bulk tied to AC ground), replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\):\n\n\\[\n\\boxed{R_{out} \\approx (g_{m1}+g_{mb1}) r_{o1} r_{o2}}\n\\]\n\nFor identical transistors with \\(g_m\\) and \\(r_o\\), this simplifies to\n\n\\[\nR_{out} \\approx g_m r_o^2 .\n\\]",
        "format": "markdown",
        "sha256": "f6713acf23acbcdfd0f3b9041608a4ec6b92b9a73fcb8ba3e476c02a58dcfdc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate cascode and gives the correct output-resistance expression and approximation. Explicitly naming both devices as PMOS is not required under the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 5885,
        "total_tokens": 8710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5515,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 5885,
        "total_tokens": 8710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5515,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **PMOS cascode current source**. To find the small-signal output resistance, apply a test voltage at the output node and measure the current that flows in.\n\nBecause the gates are biased at fixed DC voltages, they are AC grounds.\n\n1. **Transistor \\(M_2\\)** has its source at \\(V_{DD}\\) (AC ground) and its gate AC grounded, so it simply behaves as a resistor  \n   \\[\n   R_X \\approx r_{o2}\n   \\]\n   from node \\(X\\) to AC ground.\n\n2. **Transistor \\(M_1\\)** is a common-gate transistor whose source sees the resistance \\(r_{o2}\\). For a common-gate device with source degeneration \\(R_S\\), the resistance looking into the drain is\n   \\[\n   R_{\\text{out}} = r_{o1} + R_S + (g_{m1}+g_{mb1})r_{o1}R_S .\n   \\]\n\nSubstituting \\(R_S=r_{o2}\\):\n\n\\[\n\\boxed{R_{\\text{out}} = r_{o1} + r_{o2} + (g_{m1}+g_{mb1})r_{o1}r_{o2}}\n\\]\n\nUsually \\(g_m r_o \\gg 1\\), so the approximate result is\n\n\\[\n\\boxed{R_{\\text{out}} \\approx (g_{m1}+g_{mb1})r_{o1}r_{o2}}\n\\]\n\nIf body effect is neglected \\((\\gamma=0)\\),\n\n\\[\n\\boxed{R_{\\text{out}} \\approx g_{m1}r_{o1}r_{o2}}\n\\]\n\nThis is the classic cascode result: the output resistance is approximately the intrinsic gain of the cascode transistor \\(M_1\\) multiplied by the output resistance of the main current-source transistor \\(M_2\\).",
        "format": "markdown",
        "sha256": "0048e414927e79050bf4ff9ede4ffe5b8611a858e2ebcc8c1a56bf2caa0b3d1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode device and gives the full output-resistance expression and its standard approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 25405,
        "total_tokens": 28230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24985,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2825,
        "output_tokens": 25405,
        "total_tokens": 28230,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24985,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the transistor \\(M_2\\) to be in saturation, its drain‑source voltage must satisfy the PMOS saturation condition:\n\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{THP2}|\n\\]\n\nIn the circuit:\n\n- Source of \\(M_2\\): \\(V_{DD}\\)\n- Gate of \\(M_2\\): \\(V_{b2}\\)\n- Drain of \\(M_2\\): node \\(X\\)\n\nSo:\n\n\\[\nV_{SG2} = V_{DD} - V_{b2}\n\\]\n\n\\[\nV_{SD2} = V_{DD} - V_X\n\\]\n\nSubstituting into the saturation condition:\n\n\\[\nV_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{THP2}|\n\\]\n\nCanceling \\(V_{DD}\\):\n\n\\[\n\\boxed{V_X \\le V_{b2} + |V_{THP2}|}\n\\]\n\nSo \\(M_2\\) stays in saturation as long as the voltage at node \\(X\\) is not too close to \\(V_{DD}\\); equivalently, \\(V_{b2}\\) must be chosen high enough relative to \\(V_X\\).\n\nSince node \\(X\\) is also the source of \\(M_1\\),\n\n\\[\nV_X = V_{b1} + |V_{GS1}|\n\\]\n\nTherefore the condition becomes:\n\n\\[\n\\boxed{V_{b2} \\ge V_{b1} + |V_{GS1}| - |V_{THP2}|}\n\\]\n\nIn practice:\n\n1. Choose \\(V_{b1}\\) to set the desired current through \\(M_1\\).\n2. Compute or simulate \\(V_X = V_{b1} + |V_{GS1}|\\).\n3. Pick \\(V_{b2}\\) so that \\(V_X \\le V_{b2} + |V_{THP2}|\\), ideally with some margin.\n4. A common way is to generate \\(V_{b2}\\) from a diode‑connected PMOS biased at the same current, so that \\(V_{SG2}\\) naturally matches the required overdrive.\n\nAs long as that inequality holds, \\(M_2\\) operates in saturation.",
        "format": "markdown",
        "sha256": "79184803983f0b0b5c2825724289a756aa9b6a74fe5fbdfcc43ce8b19e244f1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, relates VX to Vb1, and derives the equivalent bias inequality.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2785,
        "output_tokens": 4613,
        "total_tokens": 7398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2785,
        "output_tokens": 4613,
        "total_tokens": 7398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4127,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M₂ is the upper PMOS device (its source is at \\(V_{DD}\\)). For a PMOS to be in saturation,\n\n\\[\nV_{SD2} \\ge V_{SG2} - |V_{THP}|\n\\]\n\nwhere\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}, \\qquad V_{SD2}=V_{DD}-V_X\n\\]\n\nSo the saturation condition becomes\n\n\\[\nV_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{THP}|\n\\]\n\nor simply\n\n\\[\n\\boxed{V_X \\le V_{b2}+|V_{THP}|}\n\\]\n\nThe voltage at node \\(X\\) is set by M₁:\n\n\\[\nV_X = V_{b1}+|V_{GS1}| = V_{b1}+|V_{THP}|+V_{OV1}\n\\]\n\nSubstituting this into the M₂ saturation condition gives\n\n\\[\nV_{b1}+|V_{THP}|+V_{OV1} \\le V_{b2}+|V_{THP}|\n\\]\n\n\\[\n\\boxed{V_{b2} \\ge V_{b1}+V_{OV1}}\n\\]\n\nSo, **to keep M₂ in saturation, the bias voltage \\(V_{b2}\\) must be at least one overdrive voltage above \\(V_{b1}\\)** (assuming M₁ and M₂ have about the same \\(|V_{THP}|\\)). In practice you would choose\n\n\\[\nV_{b2}=V_{b1}+V_{OV1}+\\text{small margin}\n\\]\n\nbut not so high that \\(V_{SG2}\\) becomes smaller than \\(|V_{THP}|\\) and M₂ turns off.\n\nIf \\(V_{b2}\\) is generated by a diode-connected PMOS carrying the same current, then \\(V_{b2}=V_{DD}-|V_{GS}|\\), and the design must also satisfy the overall headroom requirement\n\n\\[\nV_{DD}-V_X \\ge V_{OV2}\n\\]\n\nwhich is equivalent to the condition above.",
        "format": "markdown",
        "sha256": "c15f898189d684bf467b1769c4e195803126646cb8c87bd2a7f79fb4e2ec6d05"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, and uses VX = Vb1 + |VGS1| to derive the equivalent bias condition Vb2 − Vb1 ≥ M1’s overdrive (for equal thresholds).",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2785,
        "output_tokens": 4267,
        "total_tokens": 7052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2785,
        "output_tokens": 4267,
        "total_tokens": 7052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3808,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor \\(M_2\\) appears to be a **PMOS** (arrow pointing inward). To keep it in saturation, its drain-source voltage must be at least equal to its overdrive voltage:\n\n\\[\nV_{SD2} \\ge V_{SG2}-|V_{THP}|\n\\]\n\nFor \\(M_2\\):\n\n- Source is at \\(V_{DD}\\): \\(\\;V_{S2}=V_{DD}\\)\n- Drain is at node \\(X\\): \\(\\;V_{D2}=V_X\\)\n- Gate is at \\(V_{b2}\\): \\(\\;V_{G2}=V_{b2}\\)\n\nSo:\n\n\\[\nV_{SD2}=V_{DD}-V_X\n\\]\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}\n\\]\n\nSubstituting into the saturation condition:\n\n\\[\nV_{DD}-V_X \\ge (V_{DD}-V_{b2})-|V_{THP}|\n\\]\n\n\\[\n\\boxed{V_X \\le V_{b2}+|V_{THP}|}\n\\]\n\nEquivalently:\n\n\\[\n\\boxed{V_{b2} \\ge V_X-|V_{THP}|}\n\\]\n\nTo also keep \\(M_2\\) turned on:\n\n\\[\nV_{SG2} \\ge |V_{THP}| \\quad\\Rightarrow\\quad V_{b2} \\le V_{DD}-|V_{THP}|\n\\]\n\nSo the practical way to ensure saturation is:\n\n1. **Choose \\(V_{b2}\\) high enough** so that \\(V_X \\le V_{b2}+|V_{THP}|\\).\n2. **But not higher than \\(V_{DD}-|V_{THP}|\\)**, otherwise \\(M_2\\) would turn off.\n\nIn a high-swing cascode, \\(V_{b2}\\) is usually generated so that \\(M_2\\) has just the required overdrive, e.g.\n\n\\[\nV_{b2} \\approx V_{DD}-|V_{THP}|-V_{OV2}\n\\]\n\nwhich guarantees \\(M_2\\) stays saturated as long as\n\n\\[\nV_X \\le V_{DD}-V_{OV2}.\n\\]\n\nSince \\(V_X\\) is set by the lower transistor \\(M_1\\), the biases \\(V_{b1}\\) and \\(V_{b2}\\) must be designed together.",
        "format": "markdown",
        "sha256": "e898be677f00913cba6532827ae8fc19dca58bf49f0c72f9b27abb9b0a74f8ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M2 as PMOS and derives its saturation condition, but it treats Vb2 as the control and never relates VX to Vb1 or gives the resulting condition on Vb1, missing the key mechanism.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2787,
        "output_tokens": 6320,
        "total_tokens": 9107,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2787,
        "output_tokens": 6320,
        "total_tokens": 9107,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **single-ended NMOS cascode amplifier** (a common-source stage cascoded with a common-gate device) with an active current-source load \\(I_1\\).\n\n- \\(M_1\\) is the input transistor.\n- \\(M_2\\) is the cascode device; its gate is biased at a fixed DC voltage \\(V_{b1}\\).\n- \\(I_1\\) sets the DC current through the stack.\n\nBelow is a DC and small-signal analysis.\n\n---\n\n## 1. DC operating point\n\nAssuming both transistors are in saturation:\n\n\\[\nI_{D1}=I_{D2}=I_1\n\\]\n\nSince the source of \\(M_1\\) is grounded:\n\n\\[\nV_X = V_{GS1}\n\\]\n\nThe gate-source voltage of \\(M_2\\) is:\n\n\\[\nV_{GS2}=V_{b1}-V_X\n\\]\n\nThe output DC level is set by the condition that \\(M_2\\) remains in saturation:\n\n\\[\nV_{out} \\ge V_X + V_{OV2}\n\\]\n\nwhere \\(V_{OV2}=V_{GS2}-V_{th2}\\). Equivalently, ignoring body effect for simplicity:\n\n\\[\nV_{out,\\min}\\approx V_{b1}-V_{th2}\n\\]\n\nAlso, the current source needs enough headroom, so:\n\n\\[\nV_{out,\\max}\\approx V_{DD}-V_{\\min,I_1}\n\\]\n\nIf the bulk of \\(M_2\\) is grounded (typical in a p-substrate process), body effect raises \\(V_{th2}\\) because \\(V_{SB2}=V_X\\neq0\\). Then the expressions use the effective threshold:\n\n\\[\nV_{th2}=V_{th0}+\\gamma\\left(\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\\right)\n\\]\n\n---\n\n## 2. Small-signal voltage gain\n\nLet:\n\n- \\(g_{m1},g_{m2}\\) be the transconductances\n- \\(r_{o1},r_{o2}\\) be the output resistances\n- \\(g_{mb2}\\) be the body-effect transconductance of \\(M_2\\) (zero if its bulk is tied to its source)\n- \\(R_I\\) be the small-signal output resistance of the current source \\(I_1\\) (ideally \\(R_I\\to\\infty\\))\n\nThe resistance looking into the drain of \\(M_2\\) (with \\(M_1\\)’s source grounded) is the cascode output resistance:\n\n\\[\nR_{out,cascode}=r_{o1}+r_{o2}+\\left(g_{m2}+g_{mb2}\\right)r_{o1}r_{o2}\n\\]\n\nFor typical values where \\((g_{m2}+g_{mb2})r_{o2}\\gg1\\):\n\n\\[\nR_{out,cascode}\\approx \\left(g_{m2}+g_{mb2}\\right)r_{o1}r_{o2}\n\\]\n\nThe loaded voltage gain is approximately:\n\n\\[\n\\boxed{A_v \\approx -g_{m1}\\left(R_{out,cascode}\\parallel R_I\\right)}\n\\]\n\nFor an ideal current source \\(R_I\\to\\infty\\), the exact expression is:\n\n\\[\n\\boxed{A_v = -g_{m1}r_{o1}\\left[1+\\left(g_{m2}+g_{mb2}\\right)r_{o2}\\right]}\n\\]\n\nwhich is very large. With finite \\(R_I\\), the exact gain is:\n\n\\[\n\\boxed{A_v = -g_{m1}r_{o1}\\left[1+\\left(g_{m2}+g_{mb2}\\right)r_{o2}\\right]\\frac{R_I}{R_I+R_{out,cascode}}}\n\\]\n\n---\n\n## 3. Output resistance\n\nThe small-signal output resistance seen at \\(V_{out}\\) is:\n\n\\[\n\\boxed{R_{out}=R_{out,cascode}\\parallel R_I}\n\\]\n\nBecause of the cascode device, \\(R_{out}\\) is much higher than the output resistance of a simple common-source stage. The cascode shields the input device \\(M_1\\) from voltage swings at \\(V_{out}\\).\n\n---\n\n## 4. Input/output swing\n\n- **Input lower limit:** \\(M_1\\) must be on:\n\n\\[\nV_{in} > V_{th1}\n\\]\n\n- **Input upper limit:** \\(M_2\\) must stay on:\n\n\\[\nV_{in}=V_X < V_{b1}-V_{th2}\n\\]\n\n- **Output lower limit** (for \\(M_2\\) saturation):\n\n\\[\nV_{out,\\min}\\approx V_{b1}-V_{th2}\n\\]\n\nor, more accurately,\n\n\\[\nV_{out,\\min}\\approx V_X+V_{OV2}\n\\]\n\n- **Output upper limit** (current source headroom):\n\n\\[\nV_{out,\\max}\\approx V_{DD}-V_{\\min,I_1}\n\\]\n\n---\n\n## 5. Key features\n\n| Feature | Effect of cascode \\(M_2\\) |\n|---|---|\n| Voltage gain | Much higher than a simple common-source stage because \\(R_{out}\\) is boosted by \\(\\approx g_{m2}r_{o2}\\). |\n| Output resistance | Very high. |\n| Miller effect on \\(C_{gd1}\\) | Reduced compared with a plain common-source amplifier; the drain of \\(M_1\\) (node \\(X\\)) swings much less than \\(V_{out}\\). |\n| Bandwidth | Dominant pole is usually at \\(V_{out}\\): \\(\\omega_p\\approx 1/(R_{out}C_L)\\). Node \\(X\\) has a high-frequency pole because its impedance is low (\\(\\sim 1/g_{m2}\\)). |\n| Headroom | Requires a carefully chosen \\(V_{b1}\\) to keep \\(M_2\\) saturated while maximizing output swing. |\n\n---\n\n### Summary\n\nThis is a **high-gain cascode common-source amplifier**. Its main purpose is to obtain a large voltage gain and high output resistance using a single input transistor and a cascode device, while the current source \\(I_1\\) provides the DC bias and acts as the load.",
        "format": "markdown",
        "sha256": "dcd803996f10fefaa6ba79d471a92e2659d44fc1cb875f0d5451b4661a343542"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input device and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression specified by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 17190,
        "total_tokens": 18637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1447,
        "output_tokens": 17190,
        "total_tokens": 18637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15844,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Telescopic Cascode Common-Source Amplifier\n\nThe circuit is a **telescopic cascode amplifier** with:\n- **M₁**: input/common-source (CS) transistor\n- **M₂**: cascode transistor (common-gate configuration)\n- **I₁**: active current-source load\n- **V_b1**: DC bias voltage for the cascode gate\n- **V_out**: output taken at the drain of M₂\n\nBoth transistors are **NMOS**.\n\n---\n\n## 1. DC Operating Point\n\nThe current source forces:\n\n$$I_{D1} = I_{D2} = I_1$$\n\n**For M₁:**\n$$V_{GS1} = V_{in}, \\quad V_{DS1} = V_X$$\n\nSaturation condition:\n$$V_X \\geq V_{in} - V_{TH1} = V_{OV1}$$\n\nApproximate current (ignoring channel-length modulation):\n$$I_1 \\approx \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{in}-V_{TH1})^2$$\n\n**For M₂:**\n$$V_{GS2} = V_{b1} - V_X$$\n\nSaturation condition:\n$$V_{out} - V_X \\geq V_{GS2} - V_{TH2}$$\n\nwhich gives:\n$$V_{out} \\geq V_{b1} - V_{TH2}$$\n\nThe voltage at node X is approximately:\n$$V_X \\approx V_{b1} - V_{TH2} - \\sqrt{\\frac{2I_1}{\\mu_n C_{ox}(W/L)_2}} = V_{b1} - V_{TH2} - V_{OV2}$$\n\nFor proper biasing, choose:\n$$V_{b1} \\approx V_{OV1} + V_{TH2} + V_{OV2}$$\n\nThis makes $V_X \\approx V_{OV1}$.\n\n### Output Voltage Headroom\n- **Minimum output voltage** (both transistors saturated):\n  $$V_{out,min} \\approx V_{OV1} + V_{OV2}$$\n- **Maximum output voltage** (limited by current source headroom $V_{OV,I1}$):\n  $$V_{out,max} \\approx V_{DD} - V_{OV,I1}$$\n\nSo the cascode costs **one extra overdrive voltage** of headroom compared to a simple CS amplifier.\n\n---\n\n## 2. Small-Signal Analysis\n\nFor AC signals:\n- $V_{b1}$ is an AC ground\n- M₂ acts as a common-gate stage\n\nThe small-signal voltage gain is:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} R_{out}}$$\n\nwhere the total output resistance is:\n\n$$\\boxed{R_{out} \\approx \\left[g_{m2}r_{o2}r_{o1}\\right] \\parallel r_{oI}}$$\n\nIncluding body effect of M₂:\n$$R_{out} \\approx \\left[(g_{m2}+g_{mb2})r_{o2}r_{o1}\\right] \\parallel r_{oI}$$\n\nIf the current source is ideal ($r_{oI} \\to \\infty$):\n\n$$A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}$$\n\nThis is the **product of the intrinsic gains** of M₁ and M₂, much larger than a simple common-source amplifier gain of $-g_{m1}r_{o1}$.\n\n**Input resistance** is ideally infinite (gate current ≈ 0 at low frequencies).\n\n---\n\n## 3. Frequency Response & Bandwidth Advantages\n\nThe cascode provides two major bandwidth benefits:\n\n### A. Reduced Miller Effect\nIn a simple CS amplifier, the gate-drain capacitance $C_{GD1}$ is multiplied by approximately $|A_v| \\approx g_{m1}R_{out}$, creating a large input capacitance.\n\nIn the cascode, the drain of M₁ (node X) swings by only:\n\n$$\\frac{v_x}{v_{in}} \\approx \\frac{g_{m1}}{g_{m2}}$$\n\nSo the Miller multiplication factor for $C_{GD1}$ becomes:\n\n$$1 - \\frac{v_x}{v_{in}} \\approx 1 - \\frac{g_{m1}}{g_{m2}}$$\n\nIf $g_{m1} \\approx g_{m2}$, this factor is near **zero**, drastically reducing input capacitance.\n\n### B. Pole Locations\n- **Dominant pole** at output:\n  $$\\omega_{p,out} \\approx \\frac{1}{R_{out}C_{out}}$$\n- **Non-dominant pole** at node X:\n  $$\\omega_{p,X} \\approx \\frac{g_{m2}}{C_X}$$\n\nSince $g_{m2}/C_X$ is typically at a very high frequency, the cascode has excellent bandwidth.\n\n---\n\n## 4. Key Characteristics Summary\n\n| Feature | Cascode CS Amp | Simple CS Amp |\n|---|---|---|\n| Voltage gain | $\\approx -g_{m1}g_{m2}r_{o1}r_{o2}$ | $\\approx -g_{m1}r_{o1}$ |\n| Output resistance | $\\approx g_{m2}r_{o2}r_{o1}$ | $\\approx r_{o1}$ |\n| Output swing | $V_{DD} - V_{OV,I1} - V_{OV1} - V_{OV2}$ | $V_{DD} - V_{OV,I1} - V_{OV1}$ |\n| Input capacitance | Small (reduced Miller) | Large (Miller multiplied) |\n| Bandwidth | High | Lower |\n\n---\n\n## 5. Design Considerations\n\n1. **Bias voltage V_b1**: Must be set so both M₁ and M₂ remain in saturation with adequate margin. Typically $V_{b1} \\approx V_{OV1} + V_{TH2} + V_{OV2}$.\n\n2. **Body effect**: If M₂'s bulk is tied to ground, body effect increases $V_{TH2}$ and adds $g_{mb2}$, slightly increasing output resistance. In a triple-well process, tie M₂'s bulk to node X to eliminate body effect.\n\n3. **Current source I₁**: Should have high output resistance $r_{oI}$ for maximum gain. Often implemented with a PMOS cascode current mirror.\n\n4. **Trade-off**: The cascode improves gain and bandwidth at the cost of reduced output voltage headroom.\n\n---\n\n**In summary**, this is a high-gain, high-bandwidth common-source amplifier where the cascode transistor M₂ boosts output resistance and shields the input transistor M₁ from output voltage swings.",
        "format": "markdown",
        "sha256": "1b0d51520aefc77798e4d7915d580140c2806a20ffb9c38ce9cd8cdac91f42c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the required gain and ideal-load expression. The extra frequency-response discussion does not change the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1449,
        "output_tokens": 15375,
        "total_tokens": 16824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1449,
        "output_tokens": 15375,
        "total_tokens": 16824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Telescopic Cascode Amplifier\n\nThe circuit is a **telescopic cascode amplifier** with an NMOS input device (**M₁**) and an NMOS cascode device (**M₂**), loaded by the current source **I₁**.\n\n---\n\n## 1. Circuit Identification\n\n- **M₁** operates as a **common-source (CS)** stage.  \n  - Gate = input $V_{in}$\n  - Source = ground\n  - Drain = node **X**\n\n- **M₂** operates as a **common-gate (CG)** “cascode” device.  \n  - Gate = DC bias $V_{b1}$ (AC ground)\n  - Source = node **X**\n  - Drain = output $V_{out}$\n\n- **I₁** provides the DC bias current and acts as the **active load**. Its small-signal output resistance is $R_I$ (ideally infinite).\n\n---\n\n## 2. DC Operating Point\n\nAssume both transistors are in **saturation**:\n\n- Drain currents match the bias current:\n  $$I_{D1} = I_{D2} = I_1$$\n\n- Node **X** voltage is set by $V_{b1}$ and the gate-source voltage of $M_2$:\n  $$V_X = V_{b1} - V_{GS2}$$\n\n- Output DC voltage is determined by the $I$-$V$ characteristic of the current source $I_1$ (with finite output resistance $R_I$):\n  $$V_{out} = V_{DD} - I_1 R_I$$\n\n### Saturation Conditions\n\nFor $M_1$:\n$$V_{DS1} = V_X > V_{GS1} - V_{TH1}$$\n\nFor $M_2$:\n$$V_{DS2} = V_{out} - V_X > V_{GS2} - V_{TH2}$$\n$$\\boxed{V_{out} > V_{b1} - V_{TH2}}$$\n\nThe cascode therefore requires **more voltage headroom** than a simple common-source stage.\n\n---\n\n## 3. Small-Signal Analysis\n\n### Voltage Gain\n\nThe small-signal equivalent is a current source $g_{m1}v_{in}$ driving the high output resistance at $V_{out}$:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} R_{out}}$$\n\nwhere the output resistance is:\n\n$$\\boxed{R_{out} = \\big(r_{o1} + r_{o2} + g_{m2}r_{o1}r_{o2}\\big) \\parallel R_I}$$\n\nFor typical values where $g_{m2}r_{o1}r_{o2} \\gg r_{o1}, r_{o2}$:\n\n$$R_{out} \\approx \\big(g_{m2}r_{o1}r_{o2}\\big) \\parallel R_I$$\n\nIf the load current source is ideal ($R_I \\to \\infty$):\n\n$$\\boxed{A_v \\approx -g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\nThis is roughly the **product of the intrinsic gains** of $M_1$ and $M_2$, giving much higher gain than a single-transistor CS stage.\n\n> If body effect is present in $M_2$ (e.g., NMOS body tied to ground), replace $g_{m2}$ with $g_{m2} + g_{mb2}$.\n\n---\n\n### Input Resistance\n\nThe input is applied to the gate of $M_1$:\n\n$$\\boxed{R_{in} \\approx \\infty}$$\n\n(at low frequencies; limited by gate capacitances at high frequency).\n\n---\n\n### Output Resistance\n\nAs derived above:\n\n$$\\boxed{R_{out} \\approx g_{m2}r_{o1}r_{o2} \\parallel R_I}$$\n\nThe cascode device **shields** $M_1$ from output voltage swings, boosting the output resistance by a factor of approximately $g_{m2}r_{o2}$.\n\n---\n\n## 4. Frequency Response\n\nThere are two main poles:\n\n### Dominant Pole at $V_{out}$\nCaused by the large output resistance and the capacitance at the output node $C_{out}$ (includes $C_{db2}$, $C_{gd2}$, $C_L$, and the current-source capacitance):\n\n$$\\boxed{\\omega_{p1} \\approx \\frac{1}{R_{out}C_{out}}}$$\n\n### Non-Dominant Pole at Node X\nThe resistance at node X is relatively low due to the cascode feedback:\n\n$$R_X \\approx r_{o1} \\parallel \\frac{r_{o2} + R_I}{1 + g_{m2}r_{o2}}$$\n\nWith capacitance $C_X$ (includes $C_{db1}$, $C_{gs2}$, $C_{sb2}$):\n\n$$\\boxed{\\omega_{p2} \\approx \\frac{1}{R_X C_X}}$$\n\nBecause $R_X$ is small, $\\omega_{p2}$ is at a much higher frequency than $\\omega_{p1}$.\n\n### Zero\nFeedforward through $C_{gd2}$ creates a zero, but it is usually at very high frequency because the signal swing at node X is small.\n\n---\n\n## 5. Summary of Characteristics\n\n| Parameter | Expression |\n|-----------|------------|\n| **Topology** | Telescopic cascode amplifier |\n| **Voltage gain** | $-g_{m1}(g_{m2}r_{o1}r_{o2} \\parallel R_I)$ |\n| **Input resistance** | Very high ($\\approx \\infty$) |\n| **Output resistance** | Very high ($\\approx g_{m2}r_{o1}r_{o2} \\parallel R_I$) |\n| **Bandwidth** | Dominant pole at output; good high-frequency performance due to low resistance at node X |\n| **Headroom** | Requires at least two $V_{DS,\\text{sat}}$ drops |\n\n---\n\n## 6. Key Takeaways\n\n- This circuit achieves **very high voltage gain** by stacking a common-gate transistor on top of a common-source transistor.\n- The cascode device **increases output resistance** and **reduces the Miller effect** on $M_1$, improving bandwidth.\n- The trade-off is **reduced output voltage swing** because two transistors must remain in saturation.",
        "format": "markdown",
        "sha256": "04c9d5f857575f1f0026a044ffc7d3357bbbc84e1044660c5e4a0aee84f23f66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-source NMOS input device and M₂ as the common-gate NMOS cascode, and gives the equivalent ideal-load gain −gₘ₁gₘ₂rₒ₁rₒ₂. Other details do not undermine the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1447,
        "output_tokens": 10986,
        "total_tokens": 12433,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1447,
        "output_tokens": 10986,
        "total_tokens": 12433,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9603,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes, this is a cascode structure.**\n\nMore specifically, it is a **telescopic cascode amplifier**:\n\n- \\(M_1\\) is the **common-source (CS)** input device. Its gate is driven by \\(V_{\\text{in}}\\) and its source is grounded.\n- \\(M_2\\) is the **common-gate (CG)** “cascode” device. Its gate is biased at a fixed DC voltage \\(V_{b1}\\), its source is connected to the drain of \\(M_1\\), and its drain drives the load resistor \\(R_D\\).\n- The output is taken at the drain of \\(M_2\\).\n\nThe cascode connection raises the effective output resistance, which increases voltage gain while shielding \\(M_1\\) from voltage variations at the output.",
        "format": "markdown",
        "sha256": "cd74050841c1d675edcfce4ba807a03527f6edc76f4b812d81b29603054d8a93"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is not a cascode: M1 is a PMOS source follower with its drain grounded, not a common-source input device. The answer misidentifies the topology and incorrectly claims cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1519,
        "output_tokens": 729,
        "total_tokens": 2248,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1519,
        "output_tokens": 729,
        "total_tokens": 2248,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The circuit is a **cascode amplifier**.\n\n- **M₁** is the **common-source** input device.\n- **M₂** is a **common-gate** transistor stacked on top of M₁, with its gate biased at the fixed voltage **V_b1**.\n- The output is taken at the drain of M₂, through the load resistor **R_D**.\n\nThis is the classic NMOS cascode configuration, used to obtain high output resistance and improved isolation between the input and output nodes.",
        "format": "markdown",
        "sha256": "1444e5f6b6f7e2c3ccbe79bd950c57623216db3dc6290649e86ddbb48d3fd263"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M₁ as a common-source device; M₁ is a PMOS source follower with its drain grounded, so the cascode resistance boost is absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1521,
        "output_tokens": 817,
        "total_tokens": 2338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1521,
        "output_tokens": 817,
        "total_tokens": 2338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 738,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — the circuit is a **cascode structure**.\n\nMore specifically, it is a **telescopic cascode amplifier** with a resistive load:\n\n- \\(M_1\\) operates as a **common-source** stage: its gate is driven by \\(V_{in}\\) and its source is grounded.\n- \\(M_2\\) operates as a **common-gate** stage: its gate is biased at a fixed voltage \\(V_{b1}\\), its source is driven by the drain current of \\(M_1\\), and its drain provides the output \\(V_{out}\\).\n\nThe drain of the input transistor \\(M_1\\) is connected directly to the source of the cascode transistor \\(M_2\\), which is the defining connection of a cascode. This arrangement increases the output resistance and improves isolation between input and output compared with a simple common-source amplifier.",
        "format": "markdown",
        "sha256": "0aa6c63072c19e2ef4accfb53cfb2fca6a36c22dd3f9bef957d2978926c96e0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1: it is a PMOS source follower with its drain grounded, not a common-source device with its source grounded. Thus the structure lacks the cascode resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1519,
        "output_tokens": 406,
        "total_tokens": 1925,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 224,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1519,
        "output_tokens": 406,
        "total_tokens": 1925,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 224,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies a feedback capacitance between the input and output of an amplifier:\n\n\\[\nC_{\\text{Miller}} = C_f(1+|A_v|)\n\\]\n\nSo in a simple common‑emitter/common‑source stage, the capacitance \\(C_\\mu/C_{gd}\\) appears much larger at the input, limiting bandwidth.\n\nA **cascode** reduces this because it splits the gain into two stages and keeps the high‑swing output node away from the input node.\n\n## How a cascode works\n\nA typical MOS cascode has:\n\n- **M1**: common‑source input device\n- **M2**: common‑gate “cascode” device, with its gate AC‑grounded\n\n### 1. The input device sees little voltage gain\n\nThe drain of M1 is connected to the **source** of M2. Because M2 is a common‑gate stage, its source presents a **low impedance**, roughly \\(1/g_{m2}\\). As a result, the voltage at M1’s drain (the source of M2) swings only slightly:\n\n\\[\nA_{v1} = \\frac{v_{d1}}{v_{gs1}} \\approx -1\n\\]\n\nSo the capacitance \\(C_{gd1}\\) between the input gate and M1’s drain sees only a small voltage change. Its Miller multiplication is therefore small:\n\n\\[\nC_{\\text{Miller, M1}} \\approx C_{gd1}(1+1) = 2C_{gd1}\n\\]\n\nnot \\(C_{gd1}(1+A_v)\\) with a large \\(A_v\\).\n\n### 2. The cascode device isolates the input from the output\n\nThe large voltage gain in a cascode appears at the **drain of M2**, not at M1. But M2’s gate is AC‑grounded, so its capacitance \\(C_{gd2}\\) connects the output to AC ground, not back to the input. Therefore it does not get Miller‑multiplied at the input.\n\n### 3. Resulting input capacitance\n\nThe dominant input capacitance becomes:\n\n\\[\nC_{\\text{in}} \\approx C_{gs1} + 2C_{gd1}\n\\]\n\nInstead of the much larger:\n\n\\[\nC_{\\text{in}} \\approx C_{gs1} + C_{gd1}(1+|A_v|)\n\\]\n\n## BJT version\n\nThe same idea applies to BJT cascodes. The common‑emitter input transistor drives the **emitter** of a common‑base transistor. The common‑base stage has low input impedance (\\(\\approx r_e\\)), so the collector voltage of the CE transistor swings very little. Thus \\(C_\\mu\\) of the input transistor is not strongly Miller‑multiplied. The \\(C_\\mu\\) of the common‑base transistor connects its collector to its AC‑grounded base, so it does not couple back to the input.\n\n## Summary\n\nThe Miller effect is less pronounced in a cascode because:\n\n1. The gain from the input to the intermediate node (input transistor’s output) is small, around unity.\n2. The large output swing occurs at the cascode transistor’s output, which is isolated from the input by the low‑impedance common‑gate/common‑base stage.\n3. The feedback capacitance that would otherwise multiply at the input instead sees only a small voltage change or is connected to AC ground.\n\nThis is why cascodes are widely used to achieve high gain with wider bandwidth.",
        "format": "markdown",
        "sha256": "975402d9da2b9eaaeeb0be37809cb9a30765096fe2e6cbc34bbf250287b08dc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance M1-drain/M2-source node and the roughly unity-magnitude gain there, giving about 2× rather than full-stage Miller multiplication. It does not overstate the effect as negligible.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1397,
        "total_tokens": 1418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1397,
        "total_tokens": 1418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect makes a feedback capacitance \\(C_{gd}\\) (or \\(C_{\\mu}\\)) appear at the input as roughly\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd}(1+|A_v|)\n\\]\n\nwhere \\(A_v\\) is the voltage gain from the input node to the node across the capacitor. In a simple common-source/common-emitter stage this gain is large, so the input capacitance is dramatically increased.\n\nA cascode reduces this because the **input transistor does not see the full voltage gain at its drain**.\n\nIn a MOS cascode, for example:\n\n- The input device \\(M_1\\) is common-source, but its drain is connected to the **source** of the common-gate device \\(M_2\\).\n- Looking into the source of \\(M_2\\), the small-signal resistance is low:\n\n\\[\nR_{\\text{source}} \\approx \\frac{1}{g_{m2}}\n\\]\n\n- Therefore the voltage gain from the gate of \\(M_1\\) to the drain of \\(M_1\\) is only\n\n\\[\nA_{v1} \\approx -g_{m1}\\frac{1}{g_{m2}} \\approx -1\n\\]\n\n- The Miller multiplication of \\(C_{gd1}\\) becomes\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd1}(1+1) = 2C_{gd1}\n\\]\n\ninstead of \\(C_{gd1}(1+|A_v|)\\) with a large \\(A_v\\).\n\nThe overall gain is still obtained at the output node (the drain of \\(M_2\\)), but the capacitance there—\\(C_{gd2}\\)—is connected between the output and the AC-grounded gate of \\(M_2\\), so it does not appear Miller-multiplied at the input.\n\nSo the cascode is faster because the **low impedance at the intermediate node suppresses the Miller multiplication of the input device’s feedback capacitance**, while the high output impedance of the common-gate device preserves voltage gain.",
        "format": "markdown",
        "sha256": "9be3dd4abb8e0983fbeb02a96b4a8c845c072d8b485463d9e37eff592a405011"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node and shows that the gain across M1’s Cgd is about −1, giving roughly 2Cgd rather than multiplication by the full stage gain. Omitting body effect is a minor approximation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1081,
        "total_tokens": 1102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1081,
        "total_tokens": 1102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies a feedback capacitance by the voltage gain across it. In a common-source/common-emitter stage, the gate–drain (or base–collector) capacitance \\(C_{gd}\\) sees the full voltage gain from input to output, so the capacitance reflected to the input is roughly\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd}(1+|A_v|)\n\\]\n\nwhere \\(A_v \\approx -g_m R_L\\). For high gain, this can dominate the input capacitance and severely limit bandwidth.\n\nA **cascode** reduces this because it inserts a **common-gate (or common-base) transistor** between the drain of the input transistor and the high-gain output node:\n\n```\n      VDD\n       |\n       .\n       .\n       D  M2 (common-gate)\n       |\n       S--- X (drain of M1)\n       |\n       D  M1 (common-source)\n       |\n       S\n       |\n      GND\n```\n\nThe key point is that the **drain of the input device (node X)** is connected to the **source** of the cascode device. The common-gate transistor presents a low input resistance at its source:\n\n\\[\nR_X \\approx \\frac{1}{g_{m2}}\n\\]\n\nSo node X is held close to AC ground. The voltage gain from the input gate to node X is therefore only\n\n\\[\nA_{vX} \\approx -g_{m1}\\frac{1}{g_{m2}}\n\\]\n\nwhich is on the order of **–1**, not \\(-g_m R_L\\).\n\nBecause the gate–drain capacitance of the input transistor, \\(C_{gd1}\\), sees this small gain, its Miller-multiplied contribution becomes\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd1}(1+|A_{vX}|) \\sim 2C_{gd1}\n\\]\n\ninstead of \\(C_{gd1}(1+g_m R_L)\\).\n\nMeanwhile, the large voltage gain is developed at the **drain of the cascode transistor**, where the capacitances are not reflected back to the input by the Miller effect.\n\nIn short, the cascode **shields the input transistor from the large output voltage swing**, keeping the drain of the input device at a nearly fixed AC potential and thereby greatly reducing Miller multiplication of \\(C_{gd}\\). This lowers input capacitance and improves bandwidth.",
        "format": "markdown",
        "sha256": "eadf6ca49317f13894cdb4f92fafe768532a3a22bc239599d6f66b72a65ea9d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies the low-impedance cascode-source node and the resulting roughly unity gain across Cgd1, giving about 2Cgd1 rather than Miller multiplication by the full stage gain. Calling the node nearly AC-grounded slightly overstates the suppression, but the stated gain and capacitance factor capture the essential result.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1166,
        "total_tokens": 1187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 640,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 1166,
        "total_tokens": 1187,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 640,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **common-source (CS) voltage amplifier with a PMOS active (current-source) load**.\n\nAssuming:\n\n- \\(M_2\\) is the input **NMOS** transistor,\n- \\(M_1\\) is the **PMOS** load transistor,\n- both devices are biased in **saturation**,\n- \\(V_{b1}\\) and \\(V_{b2}\\) are fixed DC bias voltages (AC grounds),\n- long-channel square-law behavior,\n- body effect is neglected for small signals because the source of \\(M_2\\) is at AC ground.\n\n---\n\n## 1. DC operating point\n\nFor the NMOS input device \\(M_2\\):\n\n\\[\nI_{D2}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\left(V_{GS2}-V_{THN}\\right)^2\\left(1+\\lambda_n V_{DS2}\\right)\n\\]\n\nwith\n\n\\[\nV_{GS2}=V_{in}-V_{b1}, \\qquad V_{DS2}=V_{out}-V_{b1}\n\\]\n\nFor the PMOS load device \\(M_1\\):\n\n\\[\nI_{D1}=\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1\n\\left(V_{SG1}-|V_{THP}|\\right)^2\\left(1+\\lambda_p V_{SD1}\\right)\n\\]\n\nwith\n\n\\[\nV_{SG1}=V_{DD}-V_{b2}, \\qquad V_{SD1}=V_{DD}-V_{out}\n\\]\n\nAt DC the two currents must be equal:\n\n\\[\nI_{D1}=I_{D2}=I_D\n\\]\n\nThe quiescent output voltage \\(V_{out,Q}\\) is set by the intersection of the two \\(I$-$V\\) curves.\n\nDefine overdrive voltages:\n\n\\[\nV_{OV2}=V_{GS2}-V_{THN}, \\qquad V_{OV1}=V_{SG1}-|V_{THP}|\n\\]\n\nFor both transistors to stay in saturation:\n\n\\[\nV_{b1}+V_{OV2} \\le V_{out} \\le V_{DD}-V_{OV1}\n\\]\n\n---\n\n## 2. Small-signal voltage gain\n\nThe small-signal model consists of:\n\n- \\(M_2\\): a transconductance current source \\(g_{m2}v_{in}\\) in parallel with output resistance \\(r_{o2}\\),\n- \\(M_1\\): only its output resistance \\(r_{o1}\\), because its gate is at AC ground.\n\n\\[\ng_{m2}=\\sqrt{2\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 I_D}\n=\\frac{2I_D}{V_{OV2}}\n\\]\n\n\\[\nr_{o1}=\\frac{1}{\\lambda_p I_D}, \\qquad r_{o2}=\\frac{1}{\\lambda_n I_D}\n\\]\n\nKCL at the output gives:\n\n\\[\ng_{m2}v_{in}+\\frac{v_{out}}{r_{o2}}+\\frac{v_{out}}{r_{o1}}=0\n\\]\n\nTherefore:\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m2}(r_{o1}\\parallel r_{o2})}\n\\]\n\nIn terms of overdrive and channel-length modulation:\n\n\\[\n\\boxed{|A_v|=\\frac{2}{V_{OV2}(\\lambda_n+\\lambda_p)}}\n\\]\n\nThe gain is inverting: increasing \\(V_{in}\\) pulls \\(V_{out}\\) downward.\n\n---\n\n## 3. Input and output resistances\n\n- **Input resistance:** ideally infinite, because the input is applied to the gate of \\(M_2\\):\n\n\\[\nR_{in}\\approx \\infty\n\\]\n\n- **Output resistance:**\n\n\\[\n\\boxed{R_{out}=r_{o1}\\parallel r_{o2}}\n\\]\n\n---\n\n## 4. Output voltage swing\n\n- **Maximum output** (limited by PMOS leaving saturation):\n\n\\[\nV_{out,max}\\approx V_{DD}-V_{OV1}=V_{b2}+|V_{THP}|\n\\]\n\n- **Minimum output** (limited by NMOS leaving saturation):\n\n\\[\nV_{out,min}\\approx V_{b1}+V_{OV2}=V_{in,Q}-V_{THN}\n\\]\n\nFor large small-signal gain, the output should remain inside this range.\n\n---\n\n## 5. Frequency response\n\nThe dominant pole is usually set by the output node:\n\n\\[\n\\omega_{p,out}=\\frac{1}{R_{out}C_{out}}\n\\]\n\nwhere\n\n\\[\nC_{out}\\approx C_L+C_{db1}+C_{db2}+C_{gd2}\\left(1+\\frac{1}{|A_v|}\\right)\n\\]\n\nThe input capacitance is increased by the Miller effect:\n\n\\[\nC_{in}\\approx C_{gs2}+C_{gd2}(1+|A_v|)\n\\]\n\nThere is also a right-half-plane zero from \\(C_{gd2}\\):\n\n\\[\n\\omega_z\\approx \\frac{g_{m2}}{C_{gd2}}\n\\]\n\n---\n\n## 6. Summary\n\n| Quantity | Expression |\n|---|---|\n| Topology | Common-source amplifier with PMOS active load |\n| Voltage gain | \\(A_v=-g_{m2}(r_{o1}\\parallel r_{o2})\\) |\n| Input resistance | \\(\\infty\\) (ideally) |\n| Output resistance | \\(r_{o1}\\parallel r_{o2}\\) |\n| Output swing | \\(V_{b1}+V_{OV2}\\le V_{out}\\le V_{DD}-V_{OV1}\\) |\n\nIn practice, \\(V_{b2}\\) is generated by a bias circuit or current mirror to set the PMOS current, and \\(V_{b1}\\) sets the source potential (often \\(0\\) V, i.e., grounded source) of the input NMOS. If \\(V_{b1}=0\\), the circuit reduces to the classic common-source stage with a current-source load.",
        "format": "markdown",
        "sha256": "470e7a96b8f06968dd5e0128449d4f2473d8ac72b8467cff646dcab63f532597"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, but the circuit is a common-gate stage with Vin at M2’s source. This reverses the gain polarity and gives the wrong input resistance and gain mechanism.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1331,
        "output_tokens": 8748,
        "total_tokens": 10079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 1331,
        "output_tokens": 8748,
        "total_tokens": 10079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7417,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Common-Source Amplifier with Active (PMOS) Load\n\nThe circuit is a **single-stage common-source (CS) amplifier** with a **PMOS current-source load**.\n\n- **$M_2$**: NMOS input transistor. The input signal $V_{in}$ drives its gate, its source is biased at DC voltage $V_{b1}$, and its drain is the output node.\n- **$M_1$**: PMOS transistor acting as an active load. Its source is at $V_{DD}$, its gate is biased at $V_{b2}$, and its drain is also the output node.\n\nBecause the gate of $M_1$ is tied to a fixed bias ($V_{b2}$), it behaves as a current source with finite output resistance $r_{o1}$. The NMOS transistor $M_2$ converts the input voltage into a current.\n\n---\n\n## 1. DC Operating Conditions\n\nFor both transistors to operate as intended (i.e., as high-impedance elements), they must be in **saturation**.\n\n### $M_2$ (NMOS) in saturation:\n$$V_{DS2} \\ge V_{GS2} - V_{THN}$$\n\nWith:\n- $V_{GS2} = V_{in} - V_{b1}$\n- $V_{DS2} = V_{out} - V_{b1}$\n\nSo:\n$$\\boxed{V_{out} \\ge V_{in} - V_{THN}}$$\n\nThe drain current is:\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{THN})^2 (1 + \\lambda_n V_{DS2})$$\n\n### $M_1$ (PMOS) in saturation:\n$$V_{SD1} \\ge V_{SG1} - |V_{THP}|$$\n\nWith:\n- $V_{SG1} = V_{DD} - V_{b2}$\n- $V_{SD1} = V_{DD} - V_{out}$\n\nSo:\n$$\\boxed{V_{out} \\le V_{b2} + |V_{THP}|}$$\n\nThe drain current is:\n$$I_{D1} = \\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{SG1} - |V_{THP}|)^2 (1 + \\lambda_p V_{SD1})$$\n\nAt DC, both transistors carry the same current:\n$$I_{D1} = I_{D2} = I_D$$\n\nThe bias voltages $V_{b1}$ and $V_{b2}$ must be chosen so that this current equality is satisfied and both devices sit in saturation.\n\n---\n\n## 2. Small-Signal Analysis\n\nFor small signals, $V_{b1}$ and $V_{b2}$ are AC grounds.\n\n### Transconductance:\nThe input transistor $M_2$ provides transconductance:\n$$G_m = g_{m2}$$\n\nwhere:\n$$g_{m2} = \\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{THN}) = \\sqrt{2\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 I_D}$$\n\n### Output Resistance:\nThe output resistance looking into the output node is the parallel combination of the output resistances of $M_1$ and $M_2$:\n\n$$\\boxed{R_{out} = r_{o1} \\parallel r_{o2}}$$\n\nwhere:\n$$r_{o1} = \\frac{1}{\\lambda_p I_D}, \\quad r_{o2} = \\frac{1}{\\lambda_n I_D}$$\n\n### Voltage Gain:\nA positive change in $V_{in}$ increases the drain current of $M_2$, pulling the output node down. Thus:\n\n$$\\boxed{A_v = \\frac{V_{out}}{V_{in}} = -g_{m2}(r_{o1} \\parallel r_{o2})}$$\n\nThe negative sign indicates a **180° phase shift** between input and output, as expected for a common-source stage.\n\n> **Note on body effect:** If the body (substrate) of $M_2$ is not tied to its source, a body-effect transconductance $g_{mb2}$ appears from source to ground, reducing the effective gain to:\n> $$A_v = -g_{m2}\\left(r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{mb2}}\\right)$$\n\n---\n\n## 3. Input and Output Resistance\n\n- **Input resistance:** Ideally infinite (MOSFET gate draws no DC current):\n  $$R_{in} = \\infty$$\n\n- **Output resistance:**\n  $$R_{out} = r_{o1} \\parallel r_{o2}$$\n\n---\n\n## 4. Output Voltage Swing\n\nFor both devices to remain in saturation, the output must stay within:\n\n$$\\boxed{V_{in} - V_{THN} \\le V_{out} \\le V_{b2} + |V_{THP}|}$$\n\nSo the maximum useful output swing is bounded by the overdrive voltages of the two transistors. If the output goes too close to $V_{DD}$, $M_1$ enters the triode region. If it goes too close to ground (or below $V_{in} - V_{THN}$), $M_2$ enters triode.\n\n---\n\n## 5. Frequency Response\n\nThe dominant pole is usually set by the output node capacitance $C_L$:\n\n$$\\boxed{f_{out} = \\frac{1}{2\\pi (r_{o1} \\parallel r_{o2}) C_L}}$$\n\nThe input node sees Miller multiplication of $C_{gd2}$:\n\n$$C_{in} \\approx C_{gs2} + C_{gd2}(1 + |A_v|)$$\n\nThis creates an input pole:\n$$f_{in} = \\frac{1}{2\\pi R_s C_{in}}$$\n\nwhere $R_s$ is the source resistance driving $V_{in}$.\n\nThere is also a right-half-plane zero due to $C_{gd2}$:\n$$f_z = \\frac{g_{m2}}{2\\pi C_{gd2}}$$\n\n---\n\n## Summary\n\n| Parameter | Expression |\n|-----------|------------|\n| Topology | Common-source amplifier with PMOS active load |\n| Voltage gain | $A_v = -g_{m2}(r_{o1} \\parallel r_{o2})$ |\n| Output resistance | $R_{out} = r_{o1} \\parallel r_{o2}$ |\n| Input resistance | $\\infty$ |\n| Output swing | $V_{in}-V_{THN} \\le V_{out} \\le V_{b2}+|V_{THP}|$ |\n| Phase shift | $180^\\circ$ |\n\nThis circuit is widely used as a high-gain voltage amplifier stage in analog integrated circuits, such as operational amplifiers and OTAs, because it provides large voltage gain without requiring bulky resistors.",
        "format": "markdown",
        "sha256": "aaeff47ddfebf9c95d2420ae2032d57aee15b5f7e0fcd98b6df39575d93a4e03"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at the gate of M2 and identifies a common-source stage, contradicting the essential topology: Vin is applied at M2’s source in a common-gate stage, with non-inverting gain and low input resistance.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1333,
        "output_tokens": 8115,
        "total_tokens": 9448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1333,
        "output_tokens": 8115,
        "total_tokens": 9448,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6581,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThe circuit is a **common-gate (CG) amplifier**:\n\n*   **M₂** is the common-gate input transistor. Its **gate is AC-grounded through the bias voltage V_b1**, its **source is driven by V_in**, and its **drain is the output node V_out**.\n*   **M₁** is a **PMOS current-source load**. Its gate is biased at V_b2, its source is at V_DD, and its drain is connected to the output. Because the gate is fixed, M₁ behaves as a current source with finite output resistance r_o1.\n\nSo the stage converts the small-signal voltage at the source of M₂ into a voltage at the drain, with the PMOS device acting as the load.\n\n---\n\n## DC Operating Point\n\nFor proper operation, both transistors should be in **saturation**.\n\nFor the PMOS load M₁:\n\n\\[\nV_{SG1} = V_{DD} - V_{b2} > |V_{thp}|\n\\]\n\n\\[\nV_{SD1} = V_{DD} - V_{out} \\ge V_{SG1} - |V_{thp}|\n\\]\n\nFor the NMOS transistor M₂:\n\n\\[\nV_{GS2} = V_{b1} - V_{in} > V_{thn}\n\\]\n\n\\[\nV_{DS2} = V_{out} - V_{in} \\ge V_{GS2} - V_{thn}\n\\]\n\nAt DC, the drain currents are equal:\n\n\\[\nI_{D1} = I_{D2}\n\\]\n\nThis sets the quiescent output voltage V_out.\n\n---\n\n## Small-Signal Analysis\n\n### 1. Voltage Gain\n\nUsing the small-signal model of M₂ with its source as the input, gate AC grounded, and drain loaded by r_o1:\n\n\\[\nA_v = \\frac{v_{out}}{v_{in}} = (g_{m2} + g_{mb2} + g_{ds2})(r_{o1} \\parallel r_{o2})\n\\]\n\nIf body effect is neglected (g_mb2 = 0) and channel-length modulation is weak (g_ds2 small):\n\n\\[\n\\boxed{A_v \\approx g_{m2}(r_{o1} \\parallel r_{o2})}\n\\]\n\nThe gain is **positive (non-inverting)**: an increase in V_in raises V_out because M₂ sinks less current.\n\n### 2. Input Resistance\n\nLooking into the source of M₂:\n\n\\[\n\\boxed{R_{in} \\approx \\frac{1}{g_{m2} + g_{mb2}} \\approx \\frac{1}{g_{m2}}}\n\\]\n\nMore precisely:\n\n\\[\nR_{in} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m2} + g_{mb2})r_{o2}}\n\\]\n\nThe input resistance is low, which is characteristic of a common-gate stage.\n\n### 3. Output Resistance\n\nLooking into the output node with the input shorted:\n\n\\[\n\\boxed{R_{out} = r_{o1} \\parallel r_{o2}}\n\\]\n\nThe output resistance is relatively high, limited by the channel-length modulation of the two transistors.\n\n---\n\n## Summary of Characteristics\n\n| Parameter | Expression (approx.) |\n|---|---|\n| Topology | Common-gate amplifier with PMOS active load |\n| Voltage gain | \\( A_v \\approx g_{m2}(r_{o1} \\parallel r_{o2}) \\) |\n| Input resistance | \\( R_{in} \\approx 1/g_{m2} \\) |\n| Output resistance | \\( R_{out} = r_{o1} \\parallel r_{o2} \\) |\n| Polarity | Non-inverting |\n\nThis configuration provides moderate-to-high voltage gain, a low input impedance at the source, and no Miller effect (since the gate is at AC ground), making it useful for high-frequency applications.",
        "format": "markdown",
        "sha256": "f79170a5012232ff40b6c5b31fef5fc5a4b2d2432b1fd5238a03a5517eb1fe2a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M₂’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. The gain and detailed input-resistance expressions are consistent with the golden solution.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1333,
        "output_tokens": 13081,
        "total_tokens": 14414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1333,
        "output_tokens": 13081,
        "total_tokens": 14414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nEven though five capacitors are drawn, they all connect to only **two independent signal nodes**:\n\n- The input/gate node (after \\(R_S\\))\n- The output/drain node (\\(V_{\\text{out}}\\))\n\nCapacitors in parallel can be combined:\n- \\(C_{GD}\\) and \\(C_{GD2}\\) are in parallel between the input and output nodes.\n- \\(C_{DB}\\) and \\(C_{DB2}\\) are in parallel from the output node to ground.\n\nSo the circuit reduces to a second-order RC network: one pole associated with the input node and one pole associated with the output node. The transconductances of \\(M_1\\) and \\(M_2\\) are controlled sources and do not add additional poles.",
        "format": "markdown",
        "sha256": "75ab5fe133094e4cbcb3ccfff967eb58b05559805bf08bb54de8f4c0ddcb2f64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The two-pole conclusion is correct, but the answer misplaces CGD2: it connects the output to AC ground, not in parallel with CGD between input and output.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1903,
        "output_tokens": 6606,
        "total_tokens": 8509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1903,
        "output_tokens": 6606,
        "total_tokens": 8509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer: Two poles** (for the usual high‑frequency small‑signal analysis).\n\n**Why?**\n\nIf the large coupling capacitor and the supply bypass capacitor are treated as AC shorts at the frequencies where the transistor capacitances matter, the circuit has only two independent signal nodes:\n\n1. **The gate node of \\(M_1\\)** (the node after \\(R_S\\)).\n2. **The output node \\(V_{\\text{out}}\\)**.\n\nAll the capacitances connected to the output node—\\(C_{DB}\\), \\(C_{DB2}\\), \\(C_{GD2}\\), plus the Miller‑affected \\(C_{GD}\\)—simply add to the output capacitance. They do **not** create extra poles because they all terminate on the same node.\n\nThe floating capacitor \\(C_{GD}\\) between the input and output nodes couples the two poles and creates a feed‑forward zero, but it does not add a third pole.\n\nSo the transfer function has a **second‑order denominator → two poles** (plus a zero from \\(C_{GD}\\)).\n\n*Caveat:* If you do **not** short the input coupling capacitor and treat the gate of \\(M_2\\) as an independent high‑impedance node, a third pole can appear. Also, the coupling capacitor itself creates a low‑frequency zero/pole. But in the standard high‑frequency model implied by the figure, the answer is **two poles**.",
        "format": "markdown",
        "sha256": "a1d60dfcf07aa76f730c657a8a22cf32964ced7b44f8eedf61a3a01bf873aa7a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes—the M1 gate and output—and treats CGD as coupling those nodes rather than adding a pole. The caveats concern alternate models and do not change the correct answer for the figure.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1905,
        "output_tokens": 23060,
        "total_tokens": 24965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1905,
        "output_tokens": 23060,
        "total_tokens": 24965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\n**Reasoning:**\n\nIn the small-signal model there are only **two independent AC nodes**:\n\n1. **Node A** – the gate of \\(M_1\\) (between \\(R_S\\) and the transistor).\n2. **Node B** – the drain of \\(M_1\\)/\\(M_2\\), i.e. \\(V_{\\text{out}}\\).\n\nAll capacitors connect either these nodes to ground or each other:\n\n- \\(C_{GS}\\): Node A to ground\n- \\(C_{GD}\\): between Node A and Node B\n- \\(C_{DB},\\ C_{DB2},\\ C_{GD2}\\): Node B to AC ground\n\nThe floating capacitor \\(C_{GD}\\) does **not** create an extra pole; it only couples the two nodes, giving Miller multiplication of the capacitances at each node. Therefore the transfer function is second-order, so there are **two poles** (plus a right-half-plane zero from the feedforward path through \\(C_{GD}\\)).\n\nIf \\(R_S\\) were zero, the input pole would move to very high frequency, leaving essentially one dominant pole; but with the finite \\(R_S\\) shown, the circuit has **two poles**.",
        "format": "markdown",
        "sha256": "a664355aea3a8bcce348fa07db4519c31054f06cd499ae4d59d133582ca544de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent nodes and assigns the capacitors to the gate, output, and inter-node coupling; this supports two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1897,
        "output_tokens": 5411,
        "total_tokens": 7308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1897,
        "output_tokens": 5411,
        "total_tokens": 7308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5151,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Assumption:** The dot in the figure connects the gate of \\(M_2\\) to the input node, so both \\(M_1\\) and \\(M_2\\) are driven by the same small-signal \\(v_{in}\\).\n\n---\n\n## 1. Circuit identification\n\n- \\(M_1\\) is a common-source NMOS transistor with its source grounded.\n- \\(M_2\\) is an NMOS transistor stacked on top of \\(M_1\\) (source of \\(M_2\\) = drain of \\(M_1\\)).\n- The gate of \\(M_2\\) is also driven by \\(v_{in}\\).\n- The load is \\(R_D\\), and the output is taken at the drain of \\(M_2\\).\n\nThus the circuit is a **common-source stage with a common-gate “current-buffer” transistor \\(M_2\\) on top**. In the ideal-device limit, \\(M_2\\) simply passes the drain current of \\(M_1\\) to \\(R_D\\).\n\n---\n\n## 2. DC operating point\n\nNeglecting gate currents, the same DC current flows through both transistors:\n\n\\[\nI_{D1}=I_{D2}=I\n\\]\n\nUsing the square-law model:\n\n\\[\nI=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1\n(V_{IN}-V_{TH1})^2(1+\\lambda V_X)\n\\]\n\n\\[\nI=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2\n(V_{IN}-V_X-V_{TH2})^2[1+\\lambda(V_{OUT}-V_X)]\n\\]\n\nand\n\n\\[\nV_{OUT}=V_{DD}-IR_D\n\\]\n\nwhere \\(V_X\\) is the voltage at the drain of \\(M_1\\) / source of \\(M_2\\).\n\nFor saturation:\n\n\\[\nM_1:\\quad V_X \\ge V_{IN}-V_{TH1}\n\\]\n\n\\[\nM_2:\\quad V_{OUT}-V_X \\ge V_{IN}-V_X-V_{TH2}\n\\]\n\n> **Biasing caveat:** With identical NMOS threshold voltages, these two saturation conditions usually cannot both be satisfied while \\(M_2\\) is conducting; \\(M_1\\) tends to operate in triode. In small-signal analysis we assume a valid operating point has been established and work with the small-signal parameters at that point.\n\n---\n\n## 3. Small-signal analysis\n\nLet \\(v_x\\) be the small-signal voltage at the drain of \\(M_1\\). The small-signal model gives:\n\n- \\(M_1\\): current source \\(g_{m1}v_{in}\\), output resistance \\(r_{o1}\\).\n- \\(M_2\\): gate at \\(v_{in}\\), source at \\(v_x\\), drain at \\(v_{out}\\).\n\nThe drain-to-source current of \\(M_2\\) is\n\n\\[\ni_{d2}=g_{m2}(v_{in}-v_x)+g_{mb2}(0-v_x)+\\frac{v_{out}-v_x}{r_{o2}}\n\\]\n\nwhere \\(g_{mb2}\\) is the body-effect transconductance of \\(M_2\\) (zero if its bulk is tied to its source).\n\nKCL at the intermediate node and at the output node yields the exact low-frequency voltage gain:\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{\ng_{m1}\\!\\left(g_{m2}+g_{mb2}+\\dfrac{1}{r_{o2}}\\right)\n+\\dfrac{g_{m2}}{r_{o1}}\n}{\n\\dfrac{1}{R_D}\\!\\left(g_{m2}+g_{mb2}+\\dfrac{1}{r_{o2}}\\right)\n+\\dfrac{1}{r_{o1}R_D}\n+\\dfrac{1}{r_{o1}r_{o2}}\n}\n}\n\\]\n\nA useful equivalent form is\n\n\\[\nA_v = -G_m\\,(R_{out}\\parallel R_D)\n\\]\n\nwith\n\n\\[\nG_m =\n\\frac{\ng_{m1}\\!\\left(g_{m2}+g_{mb2}+\\dfrac{1}{r_{o2}}\\right)\n+\\dfrac{g_{m2}}{r_{o1}}\n}{\ng_{m2}+g_{mb2}+\\dfrac{1}{r_{o2}}+\\dfrac{1}{r_{o1}}\n}\n\\]\n\n\\[\nR_{out}=r_{o2}+r_{o1}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\n\\]\n\n---\n\n## 4. Important approximations\n\n### Channel-length modulation neglected (\\(r_{o1},r_{o2}\\to\\infty\\))\n\n\\[\n\\boxed{A_v \\approx -g_{m1}R_D}\n\\]\n\nThis is the key intuitive result: with ideal output resistances, \\(M_2\\) is transparent and the gain is the same as a single-transistor common-source stage with load \\(R_D\\).\n\n### Body effect neglected (\\(g_{mb2}=0\\))\n\n\\[\nA_v \\approx\n-\\frac{\ng_{m1}\\!\\left(g_{m2}+\\dfrac{1}{r_{o2}}\\right)\n+\\dfrac{g_{m2}}{r_{o1}}\n}{\n\\dfrac{1}{R_D}\\!\\left(g_{m2}+\\dfrac{1}{r_{o2}}\\right)\n+\\dfrac{1}{r_{o1}R_D}\n+\\dfrac{1}{r_{o1}r_{o2}}\n}\n\\]\n\n---\n\n## 5. Input and output resistance\n\n- **Input resistance:** Ideally infinite at low frequencies; in practice it is very large and capacitive.\n- **Output resistance (looking into \\(V_{out}\\)):**\n\n\\[\n\\boxed{\nR_{out,total}=R_D \\parallel\n\\bigl[r_{o2}+r_{o1}+(g_{m2}+g_{mb2})r_{o1}r_{o2}\\bigr]\n}\n\\]\n\nThe term in brackets is the cascode-like output resistance looking up through \\(M_2\\). If it is much larger than \\(R_D\\), then \\(R_{out,total}\\approx R_D\\).\n\n---\n\n## 6. Intuition\n\n\\(M_2\\) acts as a **common-gate current buffer**: it takes the signal current produced by \\(M_1\\) and delivers it to \\(R_D\\) while presenting a high output resistance. Because its gate moves with the input, in the ideal-device limit it does not reduce the signal current, so the voltage gain remains \\(-g_{m1}R_D\\). Finite output resistances and body effect introduce corrections as shown above.\n\n---\n\n*If the gate of \\(M_2\\) was intended to connect to a different node (e.g. its own drain or its own source), the topology and the gain expression would change.*",
        "format": "markdown",
        "sha256": "f3e43ad7b2aeec9e1658e6b0b98d0d5cdf989c753c91e7375c29525462c34bcb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the shared gate drive and briefly notes that M1 operates in triode, but then treats the pair as a cascode/current buffer and gives a cascode-like output resistance. It misses the essential result that the series devices act approximately like one NMOS with effective channel length L1 + L2.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 25411,
        "total_tokens": 26935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 25411,
        "total_tokens": 26935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23913,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **stacked (two-transistor) NMOS stage** with a resistive load.\n\n- Both gates are driven by the same input, \\(V_{in}\\).\n- The lower transistor \\(M_1\\) is a common-source device with its source grounded.\n- The upper transistor \\(M_2\\) has its source at the drain of \\(M_1\\) and its drain connected to load resistor \\(R_D\\).\n- Output is taken at the drain of \\(M_2\\).\n\nThis is **not a conventional cascode**, because in a cascode the gate of \\(M_2\\) would be held at a fixed DC bias. Here \\(M_2\\)’s gate is also signal-driven, so it behaves as a second common-source device stacked on top of \\(M_1\\).\n\n---\n\n## 1. DC operating point\n\nIn DC, the drain current is common to both devices:\n\n\\[\nI_{D1}=I_{D2}=I_D\n\\]\n\nLet \\(V_X\\) be the voltage at the intermediate node (drain of \\(M_1\\), source of \\(M_2\\)). Then\n\n\\[\nV_{GS1}=V_{in},\\qquad V_{GS2}=V_{in}-V_X\n\\]\n\nUsing the long-channel square-law model in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_{in}-V_{TH1})^2\n\\tag{1}\n\\]\n\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_{in}-V_X-V_{TH2})^2\n\\tag{2}\n\\]\n\nand the output DC level is\n\n\\[\nV_{out}=V_{DD}-I_D R_D\n\\tag{3}\n\\]\n\nTo keep both transistors in saturation:\n\n\\[\nV_X \\ge V_{in}-V_{TH1}\n\\]\n\n\\[\nV_{out}-V_X \\ge V_{in}-V_X-V_{TH2}\n\\;\\;\\Longrightarrow\\;\\;\nV_{out}\\ge V_{in}-V_{TH2}\n\\]\n\nIf \\(M_2\\) is an NMOS in a common p-substrate, its source is above ground, so the **body effect** raises \\(V_{TH2}\\). That usually requires \\((W/L)_2 > (W/L)_1\\) so that \\(V_X\\) remains positive.\n\n---\n\n## 2. Small-signal analysis\n\nLet the small-signal quantities be \\(v_{in}, v_x, v_{out}\\). Using the hybrid-\\(\\pi\\) model (ignoring body effect for clarity initially):\n\nFor \\(M_1\\):\n\n\\[\ni = g_{m1}v_{in}+\\frac{v_x}{r_{o1}}\n\\tag{4}\n\\]\n\nFor \\(M_2\\):\n\n\\[\ni = g_{m2}(v_{in}-v_x)+\\frac{v_{out}-v_x}{r_{o2}}\n\\tag{5}\n\\]\n\nAt the output node:\n\n\\[\nv_{out}=-iR_D\n\\tag{6}\n\\]\n\nSolving (4)–(6) gives the exact small-signal voltage gain:\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\,R_D\\,\n\\frac{\ng_{m2}+g_{m1}r_{o1}\\left(g_{m2}+\\frac{1}{r_{o2}}\\right)\n}{\n1+r_{o1}\\left(g_{m2}+\\frac{1}{r_{o2}}\\right)+\\frac{R_D}{r_{o2}}\n}\n}\n\\tag{7}\n\\]\n\nIf the body effect of \\(M_2\\) is included, replace \\(g_{m2}\\) wherever it multiplies \\(v_x\\) with \\(g_{m2}+g_{mb2}\\). The standalone \\(g_{m2}\\) term in the numerator stays \\(g_{m2}\\).\n\n---\n\n## 3. Approximate results\n\nFor typical integrated devices, \\(g_m r_o \\gg 1\\). Equation (7) simplifies to two important cases.\n\n### a) Resistive load dominates (\\(R_D \\ll g_{m2}r_{o1}r_{o2}\\))\n\n\\[\n\\boxed{A_v \\approx -g_{m1}R_D}\n\\]\n\nThus, with a normal resistor load, the gain is essentially that of a single common-source stage \\(M_1\\). The extra transistor \\(M_2\\) does not increase the gain; it mainly increases the output resistance.\n\n### b) Very high load resistance (or active load, \\(R_D \\gg R_{out}\\))\n\nThe intrinsic gain is set by the cascode-like output resistance. With \\(v_{in}=0\\), the resistance looking into the drain of \\(M_2\\) is\n\n\\[\n\\boxed{R_{out}\\approx r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\\approx g_{m2}r_{o1}r_{o2}}\n\\]\n\nand the open-circuit gain becomes\n\n\\[\n\\boxed{A_v \\approx -g_{m1}R_{out}\\approx -g_{m1}g_{m2}r_{o1}r_{o2}}\n\\]\n\n(With body effect, replace \\(g_{m2}\\) by \\(g_{m2}+g_{mb2}\\).)\n\n---\n\n## 4. Input and output impedances\n\n- **Input resistance**: ideally infinite (the gates are oxide-insulated). At high frequencies it is capacitive:\n  \\[\n  C_{in}=C_{gs1}+C_{gs2}+C_{gd2}(1-A_v)+\\dots\n  \\]\n  Because \\(C_{gd2}\\) connects input to output, it experiences Miller multiplication.\n\n- **Output resistance** (with input shorted for AC):\n  \\[\n  R_{out}\\approx g_{m2}r_{o1}r_{o2}\n  \\]\n  The effective load is\n  \\[\n  R_L = R_D \\parallel R_{out}\n  \\]\n  so the gain can also be written as \\(A_v\\approx -g_{m1}(R_D\\parallel R_{out})\\).\n\n---\n\n## 5. Intuitive explanation\n\nBecause both gates are driven by the same \\(v_{in}\\), the lower transistor \\(M_1\\) sets the series current. The upper transistor \\(M_2\\) merely adjusts its \\(V_{GS}\\) so that it passes the same current. Hence the signal current is approximately \\(g_{m1}v_{in}\\), and the output voltage is approximately \\(-g_{m1}v_{in}R_D\\).\n\nThe main value of \\(M_2\\) is to raise the output resistance, which becomes useful only when the load itself is high impedance (e.g., an active current-source load or a following high-impedance stage). With a plain resistor \\(R_D\\), the stage is effectively a common-source amplifier \\(M_1\\) loaded by \\(R_D\\).",
        "format": "markdown",
        "sha256": "1c53df251fe17836add40b93d196537901b9b1889d29252feac09937852e6d5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the series NMOS devices and their common gate drive, but misses the essential mechanism: M1 operates in triode and the pair behaves approximately like a longer-channel transistor. Treating both devices as saturated and claiming cascode-like gm·ro output-resistance multiplication gives the wrong analysis and conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 14628,
        "total_tokens": 16154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 14628,
        "total_tokens": 16154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13098,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit Identification**\n\nThe circuit is a **stacked (dual‑gate) NMOS common‑source amplifier**. Both NMOS transistors are in series, and both gates are driven by the same input $V_{in}$:\n\n- $M_1$ has its source grounded.\n- $M_2$ sits on top of $M_1$; its drain is the output node.\n- $R_D$ is the drain load resistor.\n\nBecause the two gates are tied together, the stage has a very high output resistance but an effective transconductance close to that of the bottom device $M_1$.\n\n---\n\n### 1. DC Operating Point\n\nLet the DC input bias be $V_{in}=V_G$. Then\n\n\\[\nV_{GS1}=V_G,\\qquad V_{GS2}=V_G-V_X\n\\]\n\nwhere $V_X$ is the DC voltage at the intermediate node. The drain current is the same through both devices:\n\n\\[\nI_D = I_{D1}=I_{D2}\n\\]\n\nand\n\n\\[\nV_{OUT}=V_{DD}-I_D R_D\n\\]\n\nFor amplification, both devices must be in saturation:\n\n\\[\nV_X \\ge V_G - V_{TH1}\n\\]\n\n\\[\nV_{OUT}-V_X \\ge (V_G-V_X)-V_{TH2}\n\\]\n\nA fixed DC gate bias must be provided so that both transistors operate in saturation; the figure shows only the AC signal path.\n\n---\n\n### 2. Small-Signal Model\n\nUse the MOSFET small-signal model\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nLet $v_x$ be the small-signal voltage at the source of $M_2$ (drain of $M_1$).\n\n**KCL at the intermediate node $X$:**\n\n\\[\ng_{m1}V_{in}+\\frac{v_x}{r_{o1}}\n=\ng_{m2}(V_{in}-v_x)+\\frac{V_{out}-v_x}{r_{o2}}\n\\tag{1}\n\\]\n\n**KCL at the output node:**\n\n\\[\ng_{m2}(V_{in}-v_x)+\\frac{V_{out}-v_x}{r_{o2}}+\\frac{V_{out}}{R_D}=0\n\\tag{2}\n\\]\n\nFrom (1) and (2) the circuit can be represented by an effective transconductance $G_m$ in parallel with an output resistance $R_{out}$.\n\n---\n\n### 3. Small-Signal Parameters\n\n#### Effective transconductance (output shorted, $V_{out}=0$)\n\n\\[\nG_m\n=\ng_{m1}\n+\n\\frac{g_{m2}-g_{m1}}\n{r_{o1}\\left(g_{m2}+\\dfrac{1}{r_{o1}}+\\dfrac{1}{r_{o2}}\\right)}\n\\]\n\n#### Output resistance ($V_{in}=0$, test voltage applied at output)\n\n\\[\nR_{out}\n=\nr_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n\\approx\ng_{m2}r_{o1}r_{o2}\n\\]\n\nThe top transistor $M_2$ therefore raises the output resistance by the cascode-like factor $g_{m2}r_{o1}$.\n\n---\n\n### 4. Voltage Gain\n\n\\[\n\\boxed{\nA_v = \\frac{V_{out}}{V_{in}}\n=\n-G_m\\left(R_D \\parallel R_{out}\\right)\n}\n\\]\n\nExplicitly,\n\n\\[\nA_v\n=\n-\\left[\ng_{m1}\n+\n\\frac{g_{m2}-g_{m1}}\n{r_{o1}\\left(g_{m2}+\\dfrac{1}{r_{o1}}+\\dfrac{1}{r_{o2}}\\right)}\n\\right]\n\\left[\nR_D \\parallel\n\\left(r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\\right)\n\\right]\n\\]\n\n#### Useful simplification: identical devices\n\nIf $M_1$ and $M_2$ are identical ($g_{m1}=g_{m2}=g_m$, $r_{o1}=r_{o2}=r_o$):\n\n\\[\nG_m = g_m\n\\]\n\n\\[\nR_{out}\\approx g_m r_o^2\n\\]\n\n\\[\nA_v \\approx -g_m\\left(R_D \\parallel g_m r_o^2\\right)\n\\]\n\n- If the drain load is a moderate resistor such that $R_D \\ll g_m r_o^2$, then\n\n\\[\n\\boxed{A_v \\approx -g_m R_D}\n\\]\n\n- If the load is a high-impedance current source ($R_D \\gg r_o$), then\n\n\\[\n\\boxed{A_v \\approx -g_m^2 r_o^2}\n\\]\n\n---\n\n### 5. Input and Output Resistance\n\n- **Input resistance:** ideally infinite at low frequencies because the gates are insulated. At high frequencies, the input is capacitive, dominated by $C_{gs1}$, $C_{gs2}$, and the Miller-multiplied $C_{gd2}$.\n- **Output resistance:**\n\n\\[\nR_{out,\\text{total}} = R_D \\parallel R_{out}\n\\approx\nR_D \\parallel \\left(g_{m2}r_{o1}r_{o2}\\right)\n\\]\n\n---\n\n### 6. Key Takeaways\n\n- $M_2$ acts as a high-output-resistance “stack” on top of $M_1$, giving the stage a very large $R_{out}$ and hence high gain when loaded with a high-impedance load.\n- With both gates tied to $V_{in}$, the effective transconductance is approximately $g_{m1}$ (for matched devices, exactly $g_m$). The top transistor mainly passes the current set by $M_1$ while boosting the output impedance.\n- Body effect of $M_2$ can be included by replacing $g_{m2}$ with $g_{m2}+g_{mb2}$ in the $R_{out}$ expression if its body is tied to ground rather than to its source.",
        "format": "markdown",
        "sha256": "cabf824094777c1d7b17b39fbcdf40e7cc6c1830426baea9949d9dc347d898f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It treats both devices as saturated and analyzes the stack as a true cascode, claiming a large gm·ro output-resistance boost. In the actual circuit M1 is in triode and extends M2's channel, so the essential result—an effective channel length approximately L1 + L2—is missed.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 23752,
        "total_tokens": 25278,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1526,
        "output_tokens": 23752,
        "total_tokens": 25278,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **source‑coupled NMOS differential pair** used as a **single‑ended amplifier**.\n\n- \\(M_1\\) and \\(M_2\\) share a common source node biased by the tail current source \\(I_1\\).\n- \\(M_1\\)’s drain is tied directly to \\(V_{DD}\\); \\(M_2\\)’s drain is loaded by \\(R_D\\).\n- \\(V_{in}\\) is the signal input at the gate of \\(M_1\\).\n- \\(V_b\\) is a DC bias at the gate of \\(M_2\\).\n- \\(V_{out}\\) is taken at the drain of \\(M_2\\).\n\nEquivalently, \\(M_1\\) acts as a **source follower** that drives the source of \\(M_2\\), and \\(M_2\\) acts as a **common‑gate** stage with drain load \\(R_D\\).\n\n---\n\n## 1. DC operating point\n\nAssume both transistors are in saturation, use the long‑channel square law, and neglect channel‑length modulation initially:\n\n\\[\nI_D=\\frac{1}{2}\\mu_nC_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2\n\\]\n\nAt the quiescent point, if \\(V_{in}=V_b\\) and the devices are matched:\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}\n\\]\n\n\\[\nV_{GS}=V_{TH}+V_{OV},\\qquad \nV_{OV}=\\sqrt{\\frac{I_1}{\\mu_nC_{ox}(W/L)}}\n\\]\n\n\\[\nV_S=V_b-V_{GS}\n\\]\n\n\\[\nV_{out}=V_{DD}-\\frac{I_1}{2}R_D\n\\]\n\n**Saturation constraint on \\(M_2\\):**\n\n\\[\nV_{DS2}=V_{out}-V_S \\ge V_{GS2}-V_{TH}\n\\]\n\nwhich gives\n\n\\[\nV_{out}\\ge V_b-V_{TH}\n\\]\n\nor, substituting the DC value,\n\n\\[\nV_{DD}-\\frac{I_1}{2}R_D \\ge V_b-V_{TH}\n\\]\n\nThe current source \\(I_1\\) also needs enough headroom, i.e. \\(V_S\\) must be larger than its minimum operating voltage.\n\n---\n\n## 2. Small‑signal voltage gain\n\nFor small signals, the ideal current source \\(I_1\\) is an open circuit, and \\(V_{DD}\\) is AC ground. Let \\(v_b=0\\).\n\nKCL at the common source node \\(S\\):\n\n\\[\ng_{m1}(v_{in}-v_s)+g_{m2}(0-v_s)=0\n\\]\n\n\\[\nv_s=\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in}\n\\]\n\nThe small‑signal drain current of \\(M_2\\) is\n\n\\[\ni_{d2}=g_{m2}(0-v_s)=-\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,v_{in}\n\\]\n\nThe output voltage is\n\n\\[\nv_{out}=-i_{d2}R_D\n\\]\n\nso the voltage gain is\n\n\\[\n\\boxed{A_v=\\frac{v_{out}}{v_{in}}\n=+\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_D}\n\\]\n\nFor matched transistors \\(g_{m1}=g_{m2}=g_m\\):\n\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}}\n\\]\n\nThe gain is **positive**: increasing \\(V_{in}\\) increases \\(I_{D1}\\), which steals current from \\(M_2\\); less current in \\(R_D\\) raises \\(V_{out}\\).\n\nIf body effect and finite tail resistance \\(R_{SS}\\) matter, the gain becomes approximately\n\n\\[\nA_v \\approx\n+\\frac{g_{m1}g_{m2}}\n{g_{m1}+g_{m2}+g_{mb1}+g_{mb2}+1/R_{SS}}\\,R_D\n\\]\n\n---\n\n## 3. Input and output resistance\n\n- **Input resistance:** ideally infinite, because the gates draw no DC current.\n- **Output resistance:** for \\(\\lambda\\approx 0\\),\n\n\\[\nR_{out}\\approx R_D\n\\]\n\nIf channel‑length modulation is included, the resistance looking into \\(M_2\\)’s drain adds in parallel with \\(R_D\\), raising the effective output resistance somewhat.\n\n---\n\n## 4. Voltage swing\n\n- When \\(M_2\\) is essentially off (\\(V_{in}\\gg V_b\\)):\n\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\n- When \\(M_2\\) carries all of \\(I_1\\) (\\(V_{in}\\ll V_b\\)):\n\n\\[\nV_{out}\\approx V_{DD}-I_1R_D\n\\]\n\nTo keep \\(M_2\\) in saturation at the low end:\n\n\\[\nV_{DD}-I_1R_D \\ge V_b-V_{TH}\n\\]\n\n---\n\n## 5. Frequency response (first‑order)\n\nThe dominant pole is usually at the output node:\n\n\\[\n\\omega_{p,out}\\approx \\frac{1}{R_D C_{out}}\n\\]\n\nwhere\n\n\\[\nC_{out}=C_{db2}+C_{gd2}+C_L\n\\]\n\nA higher‑frequency pole comes from the common source node:\n\n\\[\n\\omega_{p,S}\\approx \\frac{g_{m1}+g_{m2}}{C_S}\n\\]\n\nwith\n\n\\[\nC_S=C_{gs1}+C_{gs2}+C_{sb1}+C_{sb2}+C_{I1}\n\\]\n\nBecause the drain of \\(M_1\\) is AC ground, there is no Miller multiplication of \\(C_{gd1}\\); it simply appears as a shunt capacitance at the input.\n\n---\n\n## 6. Summary\n\nThe circuit is a **single‑ended differential amplifier**. For matched devices its low‑frequency gain is\n\n\\[\n\\boxed{A_v=+\\frac{g_mR_D}{2}}\n\\]\n\nIt is non‑inverting, has very high input resistance, and an output resistance approximately equal to \\(R_D\\). The main trade‑off is that only one side (\\(M_2\\)) has a load resistor, so half of the available transconductance is “lost” to the supply through \\(M_1\\).",
        "format": "markdown",
        "sha256": "29e1356db2fc73477ac181076c231b1d55bb7bf06d8211347fe798195320f066"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair and its equivalent source-follower/common-gate topology, with the correct non-inverting gain. The extra analysis does not contradict the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2472,
        "output_tokens": 22157,
        "total_tokens": 24629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20734,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2472,
        "output_tokens": 22157,
        "total_tokens": 24629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20734,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the transistors are **NMOS** (arrow pointing toward the gate/channel), the circuit is a **single-ended NMOS differential pair**:\n\n- $M_1$ and $M_2$ share a common **source** node connected to tail current sink $I_1$.\n- $M_1$ drain is tied directly to $V_{DD}$ (zero AC load).\n- $M_2$ drain is connected to $V_{DD}$ through load resistor $R_D$; $V_{out}$ is taken here.\n- $V_{in}$ drives $M_1$ gate; $V_b$ is a DC bias on $M_2$ gate.\n\n---\n\n## 1. DC Operating Point\n\nThe tail current fixes the sum of the two drain currents:\n\n$$I_{D1} + I_{D2} = I_1$$\n\nThe output DC level is:\n\n$$V_{out} = V_{DD} - I_{D2} R_D$$\n\nFor saturation, the usual conditions must hold:\n\n$$V_{DS1} \\ge V_{GS1} - V_{TH}, \\qquad V_{DS2} \\ge V_{GS2} - V_{TH}$$\n\n---\n\n## 2. Small-Signal Voltage Gain\n\nFor small signals, the current source $I_1$ is an open circuit. Let $v_s$ be the small-signal voltage at the common source node.\n\n**KCL at the source node** (neglecting $r_o$):\n\n$$g_{m1}(v_{in} - v_s) + g_{m2}(0 - v_s) = 0$$\n\nSolving for $v_s$:\n\n$$v_s = \\frac{g_{m1}}{g_{m1} + g_{m2}} \\, v_{in}$$\n\n**KCL at $V_{out}$:**\n\n$$-\\frac{v_{out}}{R_D} + g_{m2} v_s = 0 \\quad \\Rightarrow \\quad v_{out} = g_{m2} R_D \\, v_s$$\n\nThus the voltage gain is:\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1} g_{m2} R_D}{g_{m1} + g_{m2}}}$$\n\nIf $M_1$ and $M_2$ are identical and equally biased ($g_{m1} = g_{m2} = g_m$):\n\n$$\\boxed{A_v \\approx \\frac{g_m R_D}{2}}$$\n\nThe gain is **non-inverting** for NMOS: increasing $V_{in}$ increases $I_{D1}$, which forces $I_{D2}$ down (since $I_1$ is fixed), reducing the drop across $R_D$ and raising $V_{out}$.\n\n---\n\n## 3. Input and Output Resistance\n\n- **Input resistance:** Ideally infinite (MOS gate).\n- **Output resistance:** Approximately\n\n$$R_{out} \\approx R_D \\parallel r_{o2}\\!\\left(1 + \\frac{g_{m2}}{g_{m1}}\\right)$$\n\nFor matched devices this becomes roughly $R_D \\parallel 2r_o$. If $R_D \\ll r_o$, then $R_{out} \\approx R_D$.\n\n---\n\n## 4. Key Observations\n\n- This is a **differential pair with asymmetric loading**: $M_1$ provides no voltage gain at its drain, but it is essential for steering the fixed tail current $I_1$.\n- The gain is half that of a single common-source stage with the same $R_D$ (because the source node is not at AC ground).\n- $I_1$ provides common-mode rejection: variations common to both gates produce little change in $I_{D2}$ and hence $V_{out}$.\n- If body effect is significant (e.g., NMOS body grounded), replace $g_m$ with $g_m + g_{mb}$ in the source-node divider, slightly lowering the gain.\n\nIf the transistors were instead PMOS, the topology interpretation and gain sign would reverse, but the tail-current connection to ground strongly suggests NMOS operation.",
        "format": "markdown",
        "sha256": "e36d4429877920464926b59dff3457b90474fc01b10620caebb6fdf8079444c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair, with M2 biased at Vb and the output at its drain, and gives the correct non-inverting gain.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2464,
        "output_tokens": 13464,
        "total_tokens": 15928,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2464,
        "output_tokens": 13464,
        "total_tokens": 15928,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Assumption about the transistor type**\n\nThe arrow on each source terminal points from the source toward the channel, so \\(M_1\\) and \\(M_2\\) are drawn as **PMOS** devices.  \nTheir **drains** are tied together and fed by the current sink \\(I_1\\). \\(M_1\\)’s source is at \\(V_{DD}\\); \\(M_2\\)’s source is the output node and is returned to \\(V_{DD}\\) through \\(R_D\\).\n\nSo the circuit is a **single-ended PMOS current-steering pair** with the output taken at the source of \\(M_2\\).\n\n---\n\n## 1. DC operating point\n\nLet \\(V_P\\) be the dc voltage at the common drain node and \\(V_{out}\\) the dc output voltage.\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\n\\[\nV_{out}=V_{DD}-R_D I_{D2}\n\\]\n\nFor saturation of the PMOS devices:\n\n\\[\nV_{SG1}=V_{DD}-V_{in}>|V_{thp}|,\\qquad\nV_{SD1}=V_{DD}-V_P>V_{SG1}-|V_{thp}|\n\\]\n\n\\[\nV_{SG2}=V_{out}-V_b>|V_{thp}|,\\qquad\nV_{SD2}=V_{out}-V_P>V_{SG2}-|V_{thp}|\n\\]\n\nThe bias voltage \\(V_b\\) is chosen so that both transistors are on and saturated.\n\n---\n\n## 2. Small-signal voltage gain\n\nUse the low-frequency small-signal model. For a PMOS, the small-signal current **into the drain** is\n\n\\[\ni_d = g_m(v_g-v_s)+\\frac{v_d-v_s}{r_o}\n\\]\n\nLet \\(v_p\\) be the small-signal voltage at the common drain node. The ideal current sink \\(I_1\\) is an open circuit for small signals.\n\nFor \\(M_1\\):\n\n\\[\ni_{d1}=g_{m1}v_{in}+\\frac{v_p}{r_{o1}}\n\\]\n\nFor \\(M_2\\):\n\n\\[\ni_{d2}=-g_{m2}v_{out}+\\frac{v_p-v_{out}}{r_{o2}}\n\\]\n\nNode equations:\n\n1. Common drain node:\n\n\\[\ni_{d1}+i_{d2}=0\n\\]\n\n2. Output node (the resistor current equals the current into \\(M_2\\)’s drain):\n\n\\[\ni_{d2}=\\frac{v_{out}}{R_D}\n\\]\n\nSolving these two equations gives the voltage gain:\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_{m1}r_{o1}}\n{\\,1+g_{m2}r_{o2}+\\dfrac{r_{o1}+r_{o2}}{R_D}\\,}\n}\n\\]\n\n---\n\n### Useful limiting cases\n\n| Limit | Gain |\n|-------|------|\n| \\(R_D\\ll r_{o1},r_{o2}\\) (heavy load) | \\(A_v\\approx -\\dfrac{g_{m1}R_D\\,r_{o1}}{r_{o1}+r_{o2}}\\)  \\(\\;\\left(\\approx -\\dfrac{g_mR_D}{2}\\text{ if matched}\\right)\\) |\n| \\(R_D\\) very large (light load) | \\(A_v\\approx -\\dfrac{g_{m1}r_{o1}}{1+g_{m2}r_{o2}}\\)  \\(\\;\\left(\\approx -1\\text{ if matched and }g_mr_o\\gg1\\right)\\) |\n| Neglect channel-length modulation, matched devices | \\(A_v\\approx -\\dfrac{g_{m1}}{g_{m2}}\\approx -1\\) |\n\nThe gain is **inverting**: increasing \\(V_{in}\\) reduces \\(I_{D1}\\), so \\(I_{D2}\\) must increase and \\(V_{out}\\) falls.\n\n---\n\n## 3. Input and output resistances\n\n- **Input resistance:**\n\n\\[\nR_{in}=\\infty\n\\]\n\n(looking into the gate, neglecting gate leakage).\n\n- **Output resistance:**  \n  The resistance looking into the source of \\(M_2\\) with its drain loaded by \\(r_{o1}\\) is\n\n\\[\nR_{\\text{source2}}=\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}\n\\]\n\nTherefore\n\n\\[\n\\boxed{\nR_{out}=R_D\\parallel \\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}\n}\n\\]\n\nFor matched devices this is approximately\n\n\\[\nR_{out}\\approx R_D\\parallel \\frac{2}{g_m}\n\\]\n\n---\n\n## 4. Note if the devices were intended as NMOS\n\nIf the arrows are interpreted as **NMOS** with the common node as the source tail and the output taken at the drain of \\(M_2\\), the circuit becomes the ordinary differential pair, and the small-signal gain is\n\n\\[\nA_v \\approx -\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n\\quad\n\\left(\\approx -\\frac{g_mR_D}{2}\\text{ for matched devices}\\right)\n\\]\n\nFor the PMOS orientation actually drawn, use the boxed expression above.",
        "format": "markdown",
        "sha256": "d848a40c98758b8b288bdde798d5b528bb516375fae1913bff04d1c7f806a20b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a PMOS drain-coupled pair with output at M2’s source. The actual circuit is a source-coupled NMOS pair, with output at M2’s drain; its gain is non-inverting, so the proposed topology and gain are fundamentally wrong.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2470,
        "output_tokens": 38010,
        "total_tokens": 40480,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2470,
        "output_tokens": 38010,
        "total_tokens": 40480,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a PMOS common‑source stage \\(\\left(M_{1}\\right)\\) with a gate series resistor \\(R_{S}\\), loaded by the NMOS current source \\(M_{2}\\). Its output impedance can look **inductive** over a range of frequencies because the combination of\n\n* the gate–drain capacitance \\(C_{GD1}\\) of \\(M_{1}\\),\n* the gate resistance \\(R_{S}\\), and\n* the transconductance \\(g_{m1}\\)\n\ncreates a feedback path that makes the drain current lag the drain voltage in phase.\n\n---\n\n### Small‑signal view\n\nTo find the output impedance, set the independent sources to AC ground:\n\n\\[\nV_{in}=0,\\qquad V_{b}=0\n\\]\n\nThe source of \\(M_{1}\\) is tied to \\(V_{DD}\\), so it is an AC ground. The small‑signal model of \\(M_{1}\\) is therefore:\n\n* output resistance \\(r_{o1}\\) from drain to AC ground,\n* gate–source capacitance \\(C_{GS1}\\),\n* gate–drain capacitance \\(C_{GD1}\\),\n* transconductance current source. For the PMOS, an increase in gate voltage **reduces** drain current, so the controlled current subtracts at the output node.\n\n\\(M_{2}\\) simply contributes its output resistance \\(r_{o2}\\) (plus parasitic capacitances) in parallel.\n\n---\n\n### Gate node relation\n\nThe gate is connected to ground through \\(R_{S}\\) and to the output through \\(C_{GD1}\\). KCL at the gate gives\n\n\\[\nv_{g}\\left(\\frac{1}{R_{S}}+sC_{GS1}+sC_{GD1}\\right)=sC_{GD1}v_{out}\n\\]\n\nso\n\n\\[\n\\frac{v_{g}}{v_{out}}=\n\\frac{sC_{GD1}}{\\frac{1}{R_{S}}+s(C_{GS1}+C_{GD1})}.\n\\]\n\nAt low frequencies the gate is held at AC ground by \\(R_{S}\\). As frequency rises, \\(C_{GD1}\\) couples the output to the gate, making \\(v_{g}\\) rise with a **leading phase**.\n\n---\n\n### Output node relation\n\nApplying a test current \\(i_{x}\\) at the output:\n\n\\[\ni_{x}\n=\nv_{out}\\!\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}+sC_{GD1}\\right)\n-\n(g_{m1}+sC_{GD1})v_{g}.\n\\]\n\nSubstitute \\(v_{g}\\). In the frequency range where\n\n\\[\n\\omega R_{S}\\bigl(C_{GS1}+C_{GD1}\\bigr)\\ll 1,\n\\]\n\nwe have \\(v_{g}\\approx j\\omega R_{S}C_{GD1}v_{out}\\), and the output admittance becomes approximately\n\n\\[\nY_{out}\\approx\n\\frac{1}{r_{o1}\\|r_{o2}}\n+\nj\\omega C_{GD1}\n-\nj\\omega g_{m1}R_{S}C_{GD1}.\n\\]\n\nThus\n\n\\[\nY_{out}\\approx\n\\frac{1}{r_{o1}\\|r_{o2}}\n+\nj\\omega C_{GD1}\\bigl(1-g_{m1}R_{S}\\bigr).\n\\]\n\nIf\n\n\\[\n\\boxed{g_{m1}R_{S}>1}\n\\]\n\nthe imaginary part of \\(Y_{out}\\) is **negative**. A negative susceptance means the impedance\n\n\\[\nZ_{out}=\\frac{1}{Y_{out}}\n\\]\n\nhas a **positive imaginary part**, i.e. the circuit behaves like a resistance in parallel with an effective inductance.\n\n---\n\n### Physical intuition\n\n* At low frequencies, \\(C_{GD1}\\) is open, the gate is grounded, and \\(M_{1}\\) just looks like \\(r_{o1}\\) in parallel with \\(r_{o2}\\): purely resistive.\n* As frequency increases, the output couples through \\(C_{GD1}\\) to the gate. Because the gate is tied to ground through \\(R_{S}\\), the gate voltage rises and leads the output voltage in phase.\n* For the PMOS \\(M_{1}\\), a higher gate voltage **reduces** its drain current. Hence the transistor draws less current from the output node, making the output “stiffer” — its impedance increases with frequency, which is the hallmark of an inductive impedance.\n\nAt very high frequencies the various parasitic capacitances dominate and the impedance eventually becomes capacitive again, but there is a well‑defined intermediate band where the output impedance is inductive.",
        "format": "markdown",
        "sha256": "0d93f6ecf67c65a142a0780ac53bba47028d0f83514427be1f2d9e72d23a3cfb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It reaches the correct inductive condition, but analyzes a common-source stage and attributes the effect to Cgd feedback. The shown circuit is a source follower; its inductive behavior comes from Cgs and the impedance transition from about 1/gm1 to Rs.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 13865,
        "total_tokens": 15570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 13865,
        "total_tokens": 15570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12840,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **common-gate stage** with source degeneration. The reason its output impedance can look **inductive** is that any reactive impedance in the source branch is reflected to the drain by the transistor’s intrinsic gain, and the source node itself contains energy-storage elements that can become inductive over some frequency range.\n\n### Small-signal view\n\nLooking into the drain of \\(M_1\\), the output impedance is approximately\n\n\\[\nZ_{\\text{out}} \\approx r_{o1} + (1+g_{m1}r_{o1})\\,Z_s\n\\]\n\nwhere \\(Z_s\\) is the total impedance from the source of \\(M_1\\) to AC ground.\n\nBecause the gate of \\(M_1\\) is tied to \\(V_{DD}\\) (AC ground), the gate-source capacitance \\(C_{gs1}\\) appears **directly from the source node to AC ground**. Thus the source impedance is **not just the resistor \\(R_S\\)**, but rather a frequency-dependent network:\n\n\\[\nZ_s \\approx R_S \\parallel \\frac{1}{sC_{gs1}} \\parallel sL_s\n\\]\n\nHere \\(L_s\\) represents the **unavoidable parasitic inductance** of the source path: bondwires, package leads, PCB traces, or even on-chip wiring.\n\n### Why this looks inductive\n\nThe source network is a parallel \\(RLC\\) tank. Below its resonant frequency, the inductance dominates and \\(Z_s\\) is **inductive**:\n\n\\[\nZ_s \\approx sL_s\n\\]\n\nWhen this inductive \\(Z_s\\) is reflected to the drain, it is multiplied by the factor \\((1+g_{m1}r_{o1})\\):\n\n\\[\nZ_{\\text{out}} \\approx r_{o1} + (1+g_{m1}r_{o1})\\,sL_s\n\\]\n\nSo the drain presents an effective inductance of approximately\n\n\\[\nL_{\\text{eff}} \\approx (1+g_{m1}r_{o1})\\,L_s\n\\]\n\nEven a tiny source inductance is therefore enormously magnified by the transistor’s intrinsic gain.\n\n### Summary\n\nThe output impedance can be inductive because:\n\n1. The source node sees a finite \\(R_S\\) in parallel with \\(C_{gs1}\\) and whatever parasitic inductance \\(L_s\\) exists in the source path.\n2. At frequencies below the source-network resonance, the impedance becomes inductive.\n3. That inductive source impedance is reflected to the drain through the factor \\((1+g_m r_o)\\), making the output impedance at \\(V_{\\text{out}}\\) appear strongly inductive.\n\nThis is an important effect in RF and high-frequency designs, where bondwire/package inductance in the source path cannot be neglected.",
        "format": "markdown",
        "sha256": "ecd5cfac333a192dc18380e1203f2748b2d1a4dd0e0a64da97f798249654dc2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the source follower as a common-gate stage and attributes the effect to parasitic source inductance. The actual inductive behavior comes from the RS–CGS1 frequency-dependent feedback, with Zout rising from about 1/gm1 toward RS when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1713,
        "output_tokens": 39697,
        "total_tokens": 41410,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1713,
        "output_tokens": 39697,
        "total_tokens": 41410,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output node is shared by the **source of PMOS \\(M_1\\)** and the **drain of NMOS \\(M_2\\)**. \\(M_2\\) acts as a current-source load, so from the output node we see its output resistance \\(r_{o2}\\) in parallel with the impedance looking into the source of \\(M_1\\).\n\nThe inductive behavior comes from \\(M_1\\), which is wired as a **source follower** whose gate is driven through the series resistance \\(R_S\\).\n\n### Small-signal picture\nTo find the output impedance, set \\(V_{in}=0\\) (AC ground), so the gate of \\(M_1\\) is connected to ground through \\(R_S\\). The gate-source capacitance \\(C_{gs1}\\) of \\(M_1\\) then forms a frequency-dependent divider with \\(R_S\\).\n\nThe impedance looking into the source of \\(M_1\\) is approximately\n\n\\[\nZ_s \\approx \\frac{1+sR_SC_{gs1}}{g_{m1}+sC_{gs1}}\n\\]\n\n(ignoring \\(r_{o1}\\), which only modifies the magnitude).\n\n### Frequency behavior\n- **Low frequencies:** \\(C_{gs1}\\) is open. The gate is at AC ground, so the transistor presents its intrinsic source resistance:\n\n  \\[\n  Z_s \\approx \\frac{1}{g_{m1}}\n  \\]\n\n- **High frequencies:** \\(C_{gs1}\\) shorts the gate to the source, turning off the transconductance current. The output node then sees \\(R_S\\) to ground:\n\n  \\[\n  Z_s \\approx R_S\n  \\]\n\n- **When \\(R_S > 1/g_{m1}\\):** the impedance *rises* with frequency from \\(1/g_{m1}\\) up to \\(R_S\\). A rising impedance-versus-frequency characteristic is the signature of an inductor.\n\nIn the range\n\n\\[\n\\frac{1}{R_SC_{gs1}} \\ll \\omega \\ll \\frac{g_{m1}}{C_{gs1}},\n\\]\n\nthe expression simplifies to\n\n\\[\nZ_s \\approx j\\omega \\left(\\frac{R_SC_{gs1}}{g_{m1}}\\right),\n\\]\n\nso \\(M_1\\) presents an **effective inductance**\n\n\\[\nL_{\\text{eff}} \\approx \\frac{R_SC_{gs1}}{g_{m1}}.\n\\]\n\n### Total output impedance\nSince\n\n\\[\nZ_{out} = Z_s \\parallel r_{o2},\n\\]\n\nthe output impedance of the whole circuit can look inductive over the frequency range where the \\(M_1\\) source impedance is inductive. This is why the circuit can exhibit an inductive output impedance.",
        "format": "markdown",
        "sha256": "8ca4304b81b2c564e8952153ce997b3ae6aa7a6aed26d3bd10bf9e248e05b50c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Captures the essential mechanism: the source impedance rises from about 1/gm1 to RS as Cgs1 ties gate to source, so it is inductive when RS > 1/gm1. The stated approximation and output-resistance loading do not change that conclusion.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1713,
        "output_tokens": 8544,
        "total_tokens": 10257,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1713,
        "output_tokens": 8544,
        "total_tokens": 10257,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## Circuit Identification\n\nThis is a **common-source (CS) amplifier with two parallel NMOS transistors** ($M_1$ and $M_2$).\n\n- Both $M_1$ and $M_2$ are **n-channel MOSFETs** (the source/body arrows point inward).\n- Both sources are grounded.\n- Both gates are tied together at node **X**.\n- Both drains are tied together at the output node **$V_{out}$**.\n- $R_{D1}$ is the drain load resistor.\n- $I_{in}$ is a current signal injected into the high-impedance gate node **X**.\n\n## DC Operating Point\n\nAssuming both devices operate in **saturation**:\n\n$$V_{GS1} = V_{GS2} = V_X$$\n\n$$I_{D1} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1 (V_X - V_{TH1})^2(1 + \\lambda_1 V_{DS1})$$\n\n$$I_{D2} = \\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_2 (V_X - V_{TH2})^2(1 + \\lambda_2 V_{DS2})$$\n\nThe output DC voltage is:\n\n$$\\boxed{V_{out} = V_{DD} - (I_{D1} + I_{D2})R_{D1}}$$\n\n*Note: In practice, node X needs a DC bias path (not shown) because the gate is DC-isolated from the current source.*\n\n## Small-Signal Analysis\n\nThe small-signal model has:\n- Two transconductance currents: $g_{m1}v_x$ and $g_{m2}v_x$, both pulling down on $V_{out}$\n- Three parallel output resistances: $r_{o1} \\parallel r_{o2} \\parallel R_{D1}$\n\n### Voltage Gain\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_x} = -(g_{m1} + g_{m2})(R_{D1} \\parallel r_{o1} \\parallel r_{o2})}$$\n\nThe negative sign indicates signal inversion.\n\n### Input Resistance\n\nAt low frequencies, the gate resistance is essentially infinite:\n\n$$\\boxed{R_{in,X} \\approx \\infty}$$\n\n### Output Resistance\n\n$$\\boxed{R_{out} = R_{D1} \\parallel r_{o1} \\parallel r_{o2}}$$\n\n## Transimpedance with $I_{in}$\n\nSince the gate draws negligible DC current, the current source $I_{in}$ drives the gate capacitance. The input capacitance at node X is dominated by:\n\n$$C_{in} \\approx C_{gs1} + C_{gs2} + C_{gd1}(1 + |A_v|) + C_{gd2}(1 + |A_v|)$$\n\nwhere the $C_{gd}$ terms experience Miller multiplication.\n\nFor an ideal current source driving the gate:\n\n$$v_x = \\frac{i_{in}}{sC_{in}}$$\n\nTherefore, the **transimpedance gain** is:\n\n$$\\boxed{Z_T(s) = \\frac{v_{out}}{i_{in}} = \\frac{-(g_{m1} + g_{m2})(R_{out})}{sC_{in}}}$$\n\nThis gives an integrating-type response with a pole at/near DC.\n\n## Summary\n\n| Quantity | Expression |\n|---|---|\n| **Topology** | Common-source, two parallel NMOS |\n| **Voltage gain** | $A_v = -(g_{m1}+g_{m2})(R_{D1} \\parallel r_{o1} \\parallel r_{o2})$ |\n| **Input resistance** | $\\approx \\infty$ |\n| **Output resistance** | $R_{D1} \\parallel r_{o1} \\parallel r_{o2}$ |\n| **Transimpedance** | $Z_T(s) = A_v/(sC_{in})$ |",
        "format": "markdown",
        "sha256": "ff3f2841b6007349dd5532e857981ee272b60aec1f815e469a67094ecac809ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M1 as a common-source device driven by the input current at X, but misreads M2 as a parallel transistor, misses the positive-feedback loop, and gives the wrong input-resistance and stability conclusions.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2205,
        "output_tokens": 5436,
        "total_tokens": 7641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4471,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2205,
        "output_tokens": 5436,
        "total_tokens": 7641,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4471,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Assumed topology**\n\nI read the schematic as:\n\n- \\(M_1\\) and \\(M_2\\) are **n‑channel** MOSFETs (sources grounded, arrows on the sources pointing to ground).\n- \\(M_1\\) is a **common‑source** stage: gate \\(=X\\), drain \\(=V_{\\rm out}\\), loaded by \\(R_{D1}\\).\n- \\(M_2\\) is a **feedback** transistor: gate \\(=V_{\\rm out}\\), drain \\(=X\\).\n- The current source injects current into node \\(X\\).\n\nThus the two transistors are **cross‑coupled** (a single‑ended regenerative pair).\n\n---\n\n## 1. DC / large‑signal analysis\n\nAssume both devices are in saturation and follow the long‑channel square law:\n\n\\[\nI_D=\\frac12 k(V_{GS}-V_{TH})^2\n\\]\n\nThe gate of \\(M_1\\) draws no DC current, so the entire source current flows through \\(M_2\\):\n\n\\[\nI_{D2}=I_{\\rm in}\n\\]\n\nSince \\(V_{GS2}=V_{\\rm out}\\),\n\n\\[\n\\boxed{\nV_{\\rm out}=V_{TH2}+\\sqrt{\\frac{2I_{\\rm in}}{k_2}}\n}\n\\tag{1}\n\\]\n\nThe current through \\(M_1\\) is set by the drop across \\(R_{D1}\\):\n\n\\[\nI_{D1}=\\frac{V_{DD}-V_{\\rm out}}{R_{D1}}\n=\\frac12 k_1(V_X-V_{TH1})^2\n\\]\n\nso\n\n\\[\n\\boxed{\nV_X=V_{TH1}+\\sqrt{\\frac{2(V_{DD}-V_{\\rm out})}{k_1R_{D1}}}\n}\n\\tag{2}\n\\]\n\nSaturation requires\n\n\\[\nV_{\\rm out}\\ge V_X-V_{TH1},\\qquad\nV_X\\ge V_{\\rm out}-V_{TH2}.\n\\]\n\nNote that \\(I_{\\rm in}>0\\) is required; if \\(I_{\\rm in}\\) is purely AC, a DC bias path must be provided.\n\n---\n\n## 2. Small‑signal low‑frequency analysis\n\nLet lowercase symbols denote small signals and define\n\n\\[\ng_{m1}=k_1(V_X-V_{TH1}),\\qquad\ng_{m2}=k_2(V_{\\rm out}-V_{TH2}).\n\\]\n\nSources are AC ground, so\n\n\\[\nv_{gs1}=v_x,\\qquad v_{gs2}=v_o .\n\\]\n\n### Node \\(X\\)\n\nThe gate of \\(M_1\\) is an open circuit, so the injected current must exit through \\(M_2\\):\n\n\\[\ni_{\\rm in}=g_{m2}v_o\n\\]\n\nHence the **transimpedance** is\n\n\\[\n\\boxed{\nA_Z=\\frac{v_o}{i_{\\rm in}}=\\frac{1}{g_{m2}}\n}\n\\tag{3}\n\\]\n\n### Output node\n\n\\[\n\\frac{v_o}{R_{D1}}+g_{m1}v_x=0\n\\]\n\nso the voltage gain of \\(M_1\\) is\n\n\\[\n\\boxed{\n\\frac{v_o}{v_x}=-g_{m1}R_{D1}\n}\n\\tag{4}\n\\]\n\nand\n\n\\[\nv_x=-\\frac{v_o}{g_{m1}R_{D1}}\n=-\\frac{i_{\\rm in}}{g_{m1}g_{m2}R_{D1}}.\n\\]\n\nTherefore the **incremental resistance seen at node \\(X\\)** is\n\n\\[\n\\boxed{\nR_{\\rm in}=\\frac{v_x}{i_{\\rm in}}\n=-\\frac{1}{g_{m1}g_{m2}R_{D1}}\n}\n\\tag{5}\n\\]\n\nIt is **negative** because the loop is regenerative.\n\n---\n\n## 3. Including channel‑length modulation\n\nLet \\(r_{o1},r_{o2}\\) be finite and define\n\n\\[\nR_L=R_{D1}\\parallel r_{o1}.\n\\]\n\nThe nodal equations become\n\n\\[\ni_{\\rm in}=g_{m2}v_o+\\frac{v_x}{r_{o2}},\n\\]\n\n\\[\n\\frac{v_o}{R_L}+g_{m1}v_x=0\n\\quad\\Rightarrow\\quad\nv_x=-\\frac{v_o}{g_{m1}R_L}.\n\\]\n\nSolving,\n\n\\[\n\\boxed{\nZ_T=\\frac{v_o}{i_{\\rm in}}\n=\\frac{1}{\\,g_{m2}-\\dfrac{1}{g_{m1}r_{o2}R_L}\\,}\n\\approx\\frac{1}{g_{m2}}\n}\n\\tag{6}\n\\]\n\n\\[\n\\boxed{\nR_{\\rm in}\n=-\\frac{1}{g_{m1}R_L\\left(g_{m2}-\\dfrac{1}{g_{m1}r_{o2}R_L}\\right)}\n\\approx -\\frac{1}{g_{m1}g_{m2}R_L}\n}\n\\tag{7}\n\\]\n\nThe **output resistance** (looking into \\(V_{\\rm out}\\) with \\(i_{\\rm in}=0\\)) is\n\n\\[\n\\boxed{\nR_{\\rm out}\n=\\frac{1}{\\,\\dfrac{1}{R_L}-g_{m1}g_{m2}r_{o2}\\,}\n}\n\\tag{8}\n\\]\n\nwhich can also be negative.\n\n---\n\n## 4. Interpretation\n\n- The circuit converts an input current at node \\(X\\) into an output voltage with a small‑signal transimpedance of approximately \\(1/g_{m2}\\).\n- Because \\(M_1\\) inverts and \\(M_2\\) returns current to the same node, the feedback is **positive**.\n- Consequently, the incremental resistances at \\(X\\) and at \\(V_{\\rm out}\\) are **negative**.\n- The cell is therefore a **regenerative / negative‑resistance circuit** rather than a simple stable amplifier. It can be used as an active negative resistance (e.g. in oscillators or regenerative amplifiers), but it can latch or oscillate if the loop gain is too large.\n\nIf you need a particular aspect—frequency response, stability condition, or a numerical example—just let me know.",
        "format": "markdown",
        "sha256": "c96efb97fd08618d5a020ef60b98b06857821199347e57d896cf548741cd2aa6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, explains the positive-feedback loop, and derives a negative input resistance. It also recognizes the regenerative instability and possible latching, satisfying the full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2205,
        "output_tokens": 21377,
        "total_tokens": 23582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2205,
        "output_tokens": 21377,
        "total_tokens": 23582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit analysis\n\n### 1. What the circuit is doing\n\nAssuming **NMOS devices**, both transistors are common-source stages whose **sources are at AC ground** and whose **drains are tied together at the output node**. They share the same gate node \\(X\\). The input signal is the small-signal current \\(I_{in}\\) injected into that high-impedance gate node.\n\n**Important DC note:** MOSFET gates draw essentially **zero DC current**. Therefore the circuit as drawn cannot establish a DC operating point by itself; \\(I_{in}\\) must be treated as a **small-signal (AC) current**, and the DC bias of node \\(X\\) must be supplied by an omitted bias network (e.g. a large resistor or a previous stage).\n\n---\n\n### 2. DC operating point (for a given gate bias \\(V_X\\))\n\nIf \\(M_1\\) and \\(M_2\\) are in saturation:\n\n\\[\nI_{D1}=\\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)_1(V_X-V_{TH1})^2(1+\\lambda_1V_{out})\n\\]\n\n\\[\nI_{D2}=\\frac12 \\mu_n C_{ox}\\left(\\frac WL\\right)_2(V_X-V_{TH2})^2(1+\\lambda_2V_{out})\n\\]\n\nKCL at the drain/load node gives:\n\n\\[\n\\frac{V_{DD}-V_{out}}{R_{D1}} = I_{D1}+I_{D2}\n\\]\n\nThis determines the quiescent \\(V_{out}\\). Saturation requires:\n\n\\[\nV_{out} \\ge V_X - \\min(V_{TH1},\\,V_{TH2})\n\\]\n\n---\n\n### 3. Small-signal parameters\n\nBecause the two transistors are in parallel at the input and output, their small-signal effects add:\n\n\\[\nG_m = g_{m1}+g_{m2}\n\\]\n\n\\[\nR = R_{D1}\\parallel r_{o1}\\parallel r_{o2},\\qquad g_{out}=\\frac1R\n\\]\n\nCapacitances also add:\n\n\\[\nC_{GS}=C_{gs1}+C_{gs2}\n\\]\n\n\\[\nC_{GD}=C_{gd1}+C_{gd2}\n\\]\n\n\\[\nC_D = C_{db1}+C_{db2}+C_L\n\\]\n\nwhere \\(C_L\\) is any external load capacitance. Also define:\n\n\\[\nC_{IN}=C_{GS}+C_{GD},\\qquad C_T=C_{GD}+C_D\n\\]\n\n---\n\n### 4. Small-signal node equations\n\nAt node \\(X\\):\n\n\\[\nI_{in}=sC_{GS}V_x + sC_{GD}(V_x-V_{out})\n\\]\n\n\\[\n\\Rightarrow\\quad I_{in}=sC_{IN}V_x - sC_{GD}V_{out}\n\\tag{1}\n\\]\n\nAt the output node:\n\n\\[\nG_mV_x + g_{out}V_{out} + sC_DV_{out} + sC_{GD}(V_{out}-V_x)=0\n\\]\n\n\\[\n\\Rightarrow\\quad (G_m-sC_{GD})V_x + (g_{out}+sC_T)V_{out}=0\n\\tag{2}\n\\]\n\n---\n\n### 5. Key transfer functions\n\n#### Voltage gain from gate node to output\n\nFrom (2):\n\n\\[\n\\boxed{\nA_v(s)=\\frac{V_{out}}{V_x}\n= -\\frac{G_m-sC_{GD}}{g_{out}+sC_T}\n}\n\\]\n\nLow-frequency gain:\n\n\\[\nA_{v0}=-G_mR\n\\]\n\nOutput pole:\n\n\\[\n\\omega_{p,out}=\\frac{1}{R(C_T)}\n=\\frac{1}{R(C_{GD}+C_D)}\n\\]\n\nRight-half-plane zero (from feedforward through \\(C_{GD}\\)):\n\n\\[\n\\omega_z=\\frac{G_m}{C_{GD}}\n\\]\n\n#### Transimpedance \\(V_{out}/I_{in}\\)\n\nFrom (1) and (2):\n\n\\[\n\\boxed{\n\\frac{V_{out}}{I_{in}}(s)\n=\n-\\frac{G_m-sC_{GD}}\n{s\\bigl(C_{IN}g_{out}+C_{GD}G_m\\bigr)\n+ s^2\\bigl(C_{IN}C_T-C_{GD}^2\\bigr)}\n}\n\\]\n\nAt low frequencies, where \\(|s|\\ll \\omega_z,\\omega_p\\):\n\n\\[\n\\boxed{\n\\frac{V_{out}}{I_{in}}(s)\\approx\n-\\frac{G_mR}{s\\bigl[C_{GS}+(1+G_mR)C_{GD}\\bigr]}\n}\n\\]\n\nSo the circuit behaves like a **current-to-voltage integrator** at low frequencies, with an effective input capacitance strongly increased by the Miller effect. There is a pole at the origin (because the input current must flow through capacitors) plus a second pole and a right-half-plane zero at higher frequencies.\n\n#### Input impedance looking into node \\(X\\)\n\n\\[\n\\boxed{\nZ_{in}(s)=\\frac{V_x}{I_{in}}\n=\n\\frac{g_{out}+sC_T}\n{s\\bigl(C_{IN}g_{out}+C_{GD}G_m\\bigr)\n+ s^2\\bigl(C_{IN}C_T-C_{GD}^2\\bigr)}\n}\n\\]\n\nAt low frequencies:\n\n\\[\n\\boxed{\nZ_{in}(s)\\approx\n\\frac{1}{s\\bigl[C_{GS}+(1+G_mR)C_{GD}\\bigr]}\n}\n\\]\n\nThat is, the circuit looks like a **capacitor** whose value is dominated by the Miller-multiplied gate-drain capacitance.\n\n---\n\n### 6. Output resistance\n\nThe small-signal output resistance at the \\(V_{out}\\) node is simply:\n\n\\[\n\\boxed{\nR_{out}=R_{D1}\\parallel r_{o1}\\parallel r_{o2}\n}\n\\]\n\n---\n\n### 7. Interpretation and special cases\n\n- The two transistors act like a single wider transistor: only \\(G_m\\), capacitances, and output resistances add. If \\(M_2\\) were removed, just replace \\(G_m\\to g_{m1}\\), etc.\n- Because the input is a current source connected to a gate, the low-frequency response is that of an **integrator**; the exact transfer has a pole at the origin.\n- The dominant input capacitance is the Miller capacitance \\((1+G_mR)C_{GD}\\), which usually limits bandwidth.\n- The feedforward through \\(C_{GD}\\) creates a right-half-plane zero at \\(G_m/C_{GD}\\).\n- If channel-length modulation is neglected (\\(r_o\\to\\infty\\)), simply use \\(R=R_{D1}\\) in all equations.\n\nIn short, this is a **current-input, common-source transimpedance amplifier** whose small-signal behavior is governed by the total transconductance \\(G_m=g_{m1}+g_{m2}\\), the load resistance \\(R\\), and the Miller-boosted gate capacitance.",
        "format": "markdown",
        "sha256": "f6cf9537b428deb526bed360d5f6638e1ecc6c467322e6233c79e4f5726e4f69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the input current at X and M1 as a common-source device, but misreads M2 as sharing M1’s gate and output connections. It therefore misses the positive-feedback loop and its negative-resistance, instability, or latching consequence.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2205,
        "output_tokens": 15334,
        "total_tokens": 17539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2205,
        "output_tokens": 15334,
        "total_tokens": 17539,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13784,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis: Common-Gate / Common-Source Transimpedance Amplifier\n\nThe circuit is a **two-stage transimpedance amplifier (TIA)** with **shunt–shunt resistive feedback** through \\(R_F\\).\n\n- **\\(M_1\\)** operates as a **common-gate (CG)** stage. Its gate is biased at DC voltage \\(V_b\\); its source is the input node and its drain is node \\(X\\). It provides a low input resistance.\n- **\\(M_2\\)** operates as a **common-source (CS)** gain stage. Node \\(X\\) drives its gate; its drain is the output node.\n- **\\(R_F\\)** samples the output voltage and feeds a current back to the input node, setting the closed-loop transimpedance.\n- **\\(R_{D1}\\)** converts \\(M_1\\)’s drain current to a voltage at node \\(X\\).\n- **\\(R_{D2}\\)** converts \\(M_2\\)’s drain current to the output voltage.\n\n---\n\n## 1. DC Operating Point\n\nAssume both transistors are in saturation and the signal source \\(I_{in}\\) has zero DC component.\n\n\\[\nI_{D1} = \\frac{V_{DD}-V_X}{R_{D1}}, \\qquad\nI_{D2} = \\frac{V_{DD}-V_{out}}{R_{D2}}\n\\]\n\nThe feedback resistor supplies the DC bias current for \\(M_1\\):\n\n\\[\nI_{D1} = \\frac{V_{out}-V_{in}}{R_F}\n\\]\n\nSaturation conditions:\n\n\\[\nV_X \\ge V_b - V_{TH1}, \\qquad\nV_{out} \\ge V_X - V_{TH2}\n\\]\n\nThe bias voltage \\(V_b\\) is chosen to set the desired drain currents and to keep both devices saturated.\n\n---\n\n## 2. Small-Signal Analysis\n\nAt low frequencies, neglecting body effect and using \\(r_o \\to \\infty\\) for simplicity:\n\n- For \\(M_1\\) (CG): \\(v_{gs1}=-v_{in}\\). The small-signal drain current is \\(g_{m1}v_{in}\\) (flowing toward node \\(X\\)), giving\n\n\\[\nv_x \\approx g_{m1}R_{D1}\\,v_{in}\n\\]\n\n- For \\(M_2\\) (CS): \\(v_{gs2}=v_x\\). The small-signal drain current is \\(g_{m2}v_x\\), giving\n\n\\[\nv_{out} \\approx -g_{m2}(R_{D2}\\parallel R_F)\\,v_x\n\\]\n\nThe resistor \\(R_F\\) appears in parallel with \\(R_{D2}\\) because it loads the output when the feedback loop is opened for gain calculation.\n\n### Open-Loop Voltage Gain\n\n\\[\nA_{v,ol} = \\frac{v_{out}}{v_{in}}\n= -g_{m1}g_{m2}R_{D1}(R_{D2}\\parallel R_F)\n\\]\n\n### Open-Loop Transimpedance\n\nThe open-loop input resistance (looking into the source of \\(M_1\\)) is approximately \\(1/g_{m1}\\). With \\(R_F\\) in parallel:\n\n\\[\nR_{in,ol} \\approx \\frac{1}{g_{m1}}\\parallel R_F\n\\]\n\nso\n\n\\[\nA_z = \\frac{v_{out}}{I_{in}}\n= R_{in,ol}\\,A_{v,ol}\n\\approx -g_{m2}R_{D1}(R_{D2}\\parallel R_F)\n\\quad \\text{(for } g_{m1}R_F \\gg 1\\text{)}\n\\]\n\n### Loop Gain\n\nFor shunt–shunt feedback, the feedback factor is \\(\\beta \\approx 1/R_F\\):\n\n\\[\nL = A_z \\cdot \\frac{1}{R_F}\n\\approx \\frac{g_{m2}R_{D1}(R_{D2}\\parallel R_F)}{R_F}\n\\]\n\n---\n\n## 3. Closed-Loop Performance\n\n### Closed-Loop Transimpedance\n\n\\[\nR_T = \\frac{v_{out}}{I_{in}}\n= \\frac{A_z}{1+L}\n\\]\n\nFor large loop gain (\\(L \\gg 1\\)):\n\n\\[\n\\boxed{\\frac{v_{out}}{I_{in}} \\approx -R_F}\n\\]\n\nThis is the hallmark result of a high-gain shunt–shunt TIA: the transimpedance is set almost entirely by the feedback resistor.\n\n### Input Resistance\n\nShunt feedback at the input lowers the input resistance:\n\n\\[\n\\boxed{R_{in} \\approx \\frac{R_{in,ol}}{1+L}\n\\approx \\frac{1/g_{m1}}{1+\\dfrac{g_{m2}R_{D1}(R_{D2}\\parallel R_F)}{R_F}}}\n\\]\n\nFor large \\(L\\):\n\n\\[\nR_{in} \\approx \\frac{R_F}{g_{m1}g_{m2}R_{D1}(R_{D2}\\parallel R_F)}\n\\]\n\nThe input node is therefore a **virtual ground** for high loop gain, which is desirable for current-mode inputs such as photodiodes.\n\n### Output Resistance\n\nShunt feedback at the output also lowers the output resistance:\n\n\\[\n\\boxed{R_{out} \\approx \\frac{R_{D2}\\parallel R_F}{1+L}}\n\\]\n\n---\n\n## 4. Design Insights\n\n- **Bandwidth:** The dominant poles are typically at node \\(X\\) (due to \\(M_2\\)’s gate capacitance) and at the output node (due to load and parasitic capacitances). The feedback resistor \\(R_F\\) and device transconductances set the bandwidth via the Miller effect and loop gain.\n- **Noise:** Input-referred noise is dominated by \\(R_F\\), \\(M_1\\)’s channel noise, and \\(M_2\\)’s channel noise. A larger \\(g_{m1}\\) reduces input-referred current noise.\n- **Linearity:** Feedback improves linearity as long as the loop gain is high.\n- **DC bias:** \\(R_F\\) provides the bias path for \\(M_1\\). This is convenient because it eliminates the need for a separate bias transistor at the input.\n\nIn summary, this is a classic **resistive-feedback transimpedance amplifier** that uses a common-gate input for low input resistance and a common-source stage for voltage gain, achieving a well-controlled gain of approximately \\(-R_F\\).",
        "format": "markdown",
        "sha256": "3f61fc5b9f6a9d7adf057eb2a1a63dd7d7ad1901ad7869afaf21a587d768063d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 81,
        "input_tokens": 5014,
        "output_tokens": 57178,
        "total_tokens": 62192,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 55761,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 14,
        "input_tokens": 2510,
        "output_tokens": 25178,
        "total_tokens": 27688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**1. What the circuit is**\n\nThe circuit is a **two‑stage transimpedance amplifier (TIA)** with **shunt–shunt feedback**:\n\n* **M₁ / R_D₁** is a **common‑gate** stage.  \n  The input signal current is applied to the *source* of M₁, while its gate is AC‑grounded by the bias voltage \\(V_b\\). This stage gives a very low input resistance and converts current into a voltage at node \\(X\\).\n* **M₂ / R_D₂** is a **common‑source** stage that provides voltage gain from node \\(X\\) to the output.\n* **R_F** samples the output *voltage* and returns a *current* to the input node, i.e. shunt–shunt (transresistance) feedback.\n\nIt is often used as an optical‑receiver front end: the photodiode current is \\(I_{in}\\) and the output is a voltage \\(V_{out}\\approx -I_{in}R_F\\).\n\n---\n\n**2. DC bias (qualitative)**\n\nAll transistors should be biased in saturation.\n\n* M₁: gate fixed at \\(V_b\\), source at \\(V_S\\), drain at \\(V_X\\).  \n  \\[\n  I_{D1}=f(V_b-V_S),\\qquad V_X=V_{DD}-I_{D1}R_{D1}\n  \\]\n  Saturation requires \\(V_X \\ge V_b-V_{TH1}\\) (ignoring body effect).\n\n* M₂: source grounded, gate at \\(V_X\\), drain at \\(V_{out}\\).  \n  \\[\n  I_{D2}=f(V_X-V_{TH2}),\\qquad V_{out}=V_{DD}-I_{D2}R_{D2}\n  \\]\n  Saturation requires \\(V_{out}\\ge V_X-V_{TH2}\\).\n\n* The feedback resistor also provides a DC path:\n  \\[\n  I_{D1}=I_{in,\\,DC}+\\frac{V_{out}-V_S}{R_F}\n  \\]\n\n---\n\n**3. Small‑signal analysis**\n\nAssume the transistors are in saturation and, for simplicity, neglect channel‑length modulation (\\(r_o\\to\\infty\\)). Body effect, if present, can be absorbed into an effective \\(g_{m1}\\).\n\nThe three small‑signal node equations are:\n\n**Node \\(X\\) (drain of M₁):**\n\\[\n\\frac{V_x}{R_{D1}}-g_{m1}V_s=0\n\\quad\\Longrightarrow\\quad\nV_x=g_{m1}R_{D1}V_s\n\\]\n\n**Node \\(V_{out}\\) (drain of M₂):**\n\\[\n\\frac{V_o}{R_{D2}}+\\frac{V_o-V_s}{R_F}+g_{m2}V_x=0\n\\]\n\n**Node \\(V_s\\) (source of M₁):**\n\\[\nI_{in}+\\frac{V_o-V_s}{R_F}=g_{m1}V_s\n\\]\n\nSolving these gives the **closed‑loop transimpedance**:\n\n\\[\n\\boxed{\nZ_T=\\frac{V_{out}}{I_{in}}\n=\n\\frac{R_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)}\n{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nBecause \\(g_{m1}g_{m2}R_{D1}R_F\\gg 1\\) in normal designs, this is negative, as expected for an inverting TIA.\n\n---\n\n**4. Useful approximations**\n\nWhen the loop gain is large and \\(g_{m1}R_F\\gg 1\\),\n\n\\[\n\\boxed{Z_T \\approx -R_F}\n\\]\n\nThis is the familiar TIA result: the output voltage is approximately the input current times the feedback resistor, with a sign inversion.\n\nDefine the loop gain (for the simplified case \\(g_{m1}R_F\\gg 1\\)) as\n\n\\[\n\\boxed{\nT \\approx \\frac{g_{m2}R_{D1}(R_{D2}\\parallel R_F)}{R_F}\n}\n\\]\n\nThen:\n\n| Quantity | Exact / rₒ neglected | High‑gain approximation |\n|---|---|---|\n| Transimpedance | \\(\\displaystyle Z_T=\\frac{R_{D2}(1-g_{m1}g_{m2}R_{D1}R_F)}{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\\) | \\(\\displaystyle Z_T\\approx -R_F\\) |\n| Input resistance | \\(\\displaystyle R_{in}=\\frac{R_F+R_{D2}}{1+g_{m1}(R_F+R_{D2})+g_{m1}g_{m2}R_{D1}R_{D2}}\\) | \\(\\displaystyle R_{in}\\approx \\frac{1}{g_{m1}(1+T)}\\) |\n| Output resistance | \\(\\displaystyle R_{out}\\approx \\frac{R_F R_{D2}}{R_F+R_{D2}+g_{m2}R_{D1}R_{D2}}\\) | \\(\\displaystyle R_{out}\\approx \\frac{R_{D2}\\parallel R_F}{1+T}\\) |\n\nSo shunt–shunt feedback makes both the input and output resistances very small.\n\n---\n\n**5. Bandwidth / stability considerations**\n\nThe main poles are set by the node capacitances:\n\n* **Input pole:** associated with the total capacitance at the source of M₁ (photodiode capacitance, \\(C_{sb1}\\), etc.). Because \\(R_{in}\\) is small, this pole is pushed to high frequency.\n* **Node‑\\(X\\) pole:** \\(\\displaystyle \\omega_{pX}\\approx \\frac{1}{R_{D1}C_X}\\), where \\(C_X\\) is the capacitance at \\(X\\) (mainly \\(C_{gs2}\\), \\(C_{gd1}\\), and layout parasitics).\n* **Output pole:** \\(\\displaystyle \\omega_{p,out}\\approx \\frac{1}{R_{out}C_L}\\), where \\(C_L\\) is the load capacitance.\n\nThe feedback resistor, together with its parasitic capacitance and \\(C_{gd2}\\), creates a feedback zero; the phase margin of the loop must be checked to ensure stability. In general, the feedback trades gain accuracy for bandwidth: the closed‑loop bandwidth is wider than the open‑loop bandwidth by roughly the loop‑gain factor.\n\n---\n\n**6. Design insight**\n\n* Choose \\(R_F\\) to set the desired transimpedance \\(|Z_T|\\).\n* Make the second‑stage gain large:\n  \\[\n  g_{m2}R_{D1}(R_{D2}\\parallel R_F)\\gg R_F\n  \\]\n  so that \\(Z_T\\approx -R_F\\) is accurate.\n* A large \\(g_{m1}\\) keeps the input resistance low, which is good for high‑speed operation with capacitive current sources.\n* Keep node capacitances small and ensure M₁/M₂ remain in saturation over the required output swing.\n\n---\n\n**Summary:** This is a common‑gate input, common‑source output transimpedance amplifier. For high loop gain, it gives\n\n\\[\nV_{out}\\approx -I_{in}R_F\n\\]\n\nwith very low input and output resistances, making it well suited for high‑speed current‑to‑voltage conversion.",
        "format": "markdown",
        "sha256": "81d948da6868e20b1b53216a9839eb5488ccf38ee59fcd24a4fb8da4077c523d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-gate input device, M₂ as the common-source stage driven by X, and R_F as output-to-input shunt-shunt feedback. It also gives the correct negative-feedback TIA result, V_out/I_in ≈ −R_F.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2512,
        "output_tokens": 22615,
        "total_tokens": 25127,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20959,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2512,
        "output_tokens": 22615,
        "total_tokens": 25127,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20959,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit is a **two-stage CMOS transimpedance amplifier (TIA)** with **resistive shunt–shunt feedback**.\n\nIt converts a small input current \\(I_{\\text{in}}\\) into an output voltage \\(V_{\\text{out}}\\). It consists of:\n\n- **M₁**: PMOS transistor, gate biased at \\(V_b\\), operating as the first stage.\n- **M₂**: NMOS common-source gain stage.\n- **\\(R_{D1}\\)**: Load/bias resistor for node \\(X\\).\n- **\\(R_{D2}\\)**: Load resistor for \\(M_2\\).\n- **\\(R_F\\)**: Feedback resistor from output back to the input node.\n\n---\n\n## 1. DC Biasing\n\n- Current flows from \\(V_{DD}\\) through \\(R_{D1}\\), through \\(M_1\\), and splits between the input current source \\(I_{\\text{in}}\\) and the feedback resistor \\(R_F\\).\n- \\(V_b\\) sets the DC gate voltage of \\(M_1\\), which in turn establishes the DC voltage at node \\(X\\) and the drain current of \\(M_1\\).\n- Node \\(X\\) drives the gate of \\(M_2\\), and \\(R_{D2}\\) sets the DC operating point at \\(V_{\\text{out}}\\).\n\nFor proper operation, \\(M_1\\) and \\(M_2\\) should be biased in **saturation**.\n\n---\n\n## 2. Small-Signal Operation\n\nThe small-signal model is governed by KCL at three nodes:\n\n| Node | Equation |\n|------|----------|\n| \\(X\\) (M₁ source, M₂ gate) | \\(\\displaystyle \\frac{V_X}{R_{D1}} + g_{m1}V_X + \\frac{V_X - V_Y}{r_{o1}} = 0\\) |\n| \\(Y\\) (input node) | \\(\\displaystyle I_{\\text{in}} = -g_{m1}V_X - \\frac{V_X - V_Y}{r_{o1}} + \\frac{V_Y - V_{\\text{out}}}{R_F}\\) |\n| \\(V_{\\text{out}}\\) | \\(\\displaystyle \\frac{V_{\\text{out}}}{R_{D2}} + g_{m2}V_X + \\frac{V_{\\text{out}}}{r_{o2}} + \\frac{V_{\\text{out}} - V_Y}{R_F} = 0\\) |\n\nUsing the first equation, define:\n\n\\[\nA_1 \\equiv 1 + g_{m1}r_{o1} + \\frac{r_{o1}}{R_{D1}}, \\qquad V_Y = A_1 V_X\n\\]\n\nand let\n\n\\[\nR_{L2} \\equiv R_{D2} \\parallel r_{o2}\n\\]\n\nThe **closed-loop transimpedance gain** is:\n\n\\[\n\\boxed{\n\\frac{V_{\\text{out}}}{I_{\\text{in}}}\n=\nR_F \\cdot\n\\frac{(A_1 - R_F g_{m2})\\frac{R_{L2}}{R_{L2}+R_F}}\n{A_1 + \\frac{R_F}{R_{D1}} - (A_1 - R_F g_{m2})\\frac{R_{L2}}{R_{L2}+R_F}}\n}\n\\]\n\n---\n\n## 3. Useful Approximation\n\nWhen the forward gain through \\(M_2\\) is large, i.e.,\n\n\\[\nR_F g_{m2} \\gg A_1\n\\]\n\nthe expression simplifies to the familiar TIA result:\n\n\\[\n\\boxed{\\frac{V_{\\text{out}}}{I_{\\text{in}}} \\approx -R_F}\n\\]\n\nThe negative sign indicates that an increase in input current produces a decrease in output voltage (inverting behavior).\n\n---\n\n## 4. Input and Output Impedance\n\nBecause this is **shunt–shunt feedback**, the feedback resistor is the principal element seen at the input and output.\n\n- **Input impedance** (looking into the input node) is approximately:\n\n\\[\n\\boxed{R_{\\text{in}} \\approx \\frac{R_F}{1 + |A_{\\text{loop}}|}}\n\\]\n\nwhere \\(A_{\\text{loop}}\\) is the loop gain. With high loop gain, \\(R_{\\text{in}}\\) becomes small, which is desirable for current-mode input.\n\n- **Output impedance** is approximately:\n\n\\[\n\\boxed{R_{\\text{out}} \\approx R_F \\parallel R_{D2} \\parallel r_{o2}}\n\\]\n\nfor moderate loop gain. High loop gain further reduces \\(R_{\\text{out}}\\).\n\n---\n\n## 5. Frequency Response and Stability\n\nThe circuit has multiple poles:\n\n1. **Pole at node \\(X\\)** dominated by \\(R_{D1}\\), \\(R_F\\), and the parasitic capacitances at node \\(X\\).\n2. **Pole at \\(V_{\\text{out}}\\)** dominated by \\(R_{D2} \\parallel R_F\\) and the drain capacitance of \\(M_2\\).\n3. **Right-half-plane or feedforward zero** through \\(R_F\\) and the Miller capacitance \\(C_{gd2}\\) of \\(M_2\\).\n\nThe dominant pole is usually set by the output node:\n\n\\[\nf_{p,\\text{dom}} \\approx \\frac{1}{2\\pi (R_{D2} \\parallel R_F) C_L}\n\\]\n\nwhere \\(C_L\\) is the total capacitance at the output.\n\n---\n\n## 6. Design Considerations\n\n| Component | Role |\n|-----------|------|\n| \\(R_F\\) | Sets transimpedance gain and bandwidth trade-off; larger \\(R_F\\) gives higher gain but lower bandwidth. |\n| \\(M_1\\) | Provides input current-to-voltage conversion; biased by \\(V_b\\). |\n| \\(M_2\\) | Provides voltage gain from node \\(X\\) to \\(V_{\\text{out}}\\). |\n| \\(R_{D1}\\) | Biases node \\(X\\); affects first-stage gain. |\n| \\(R_{D2}\\) | Load for \\(M_2\\); sets output voltage swing. |\n| \\(V_b\\) | Bias for \\(M_1\\); chosen to keep \\(M_1\\) in saturation. |\n\nNoise performance is dominated by thermal noise from \\(R_F\\), \\(R_{D1}\\), \\(R_{D2}\\), and the transistors. For sensitive applications, \\(R_F\\) is often the largest noise contributor, so increasing \\(R_F\\) improves gain but may worsen noise per unit bandwidth.\n\n---\n\n## Summary\n\nThis is a **two-stage CMOS transimpedance amplifier**. Its key performance metric is the transimpedance gain:\n\n\\[\n\\frac{V_{\\text{out}}}{I_{\\text{in}}} \\approx -R_F\n\\]\n\nwith low input resistance and moderate output resistance due to shunt–shunt feedback. It is commonly used as a **photodetector front-end** or any application requiring current-to-voltage conversion.",
        "format": "markdown",
        "sha256": "671369085af912bcd52ebef8fd70bfc6a217068f885ed166eff59f1dd2842340"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes a resistive-feedback TIA, M2 as a common-source stage, and RF returning from the output to the input. But it misidentifies M1 as PMOS and swaps its input/source and drain-node connections, so its device model and small-signal equations do not match the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2512,
        "output_tokens": 17388,
        "total_tokens": 19900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2512,
        "output_tokens": 17388,
        "total_tokens": 19900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13832,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Below is a systematic analysis of the circuit. I will assume the usual CMOS symbol conventions:\n\n- **M₁**: NMOS in **common‑gate** configuration. Its gate is biased at the DC voltage \\(V_b\\), its source is the node driven by the input current, and its drain is \\(V_{\\text{out}}\\).\n- **M₂**: PMOS in **common‑source** configuration. Its source is at \\(V_{DD}\\), its gate is tied to the source node of M₁, and its drain is \\(V_{\\text{out}}\\).\n- **\\(I_1\\)**: DC current source from \\(V_{DD}\\) to the output. For small‑signal analysis it is an open circuit if ideal.\n- **Unlabeled bottom current source**: DC bias current \\(I_B\\) from the source node to ground; also open for AC.\n\nThe input signal is the current \\(I_{\\text{in}}\\) injected into the source node of M₁.\n\n---\n\n## 1. DC operating point\n\nLet the source node of M₁ be \\(V_S\\) and the output be \\(V_{\\text{out}}\\).\n\nKCL at the source node gives\n\n\\[\nI_{\\text{in}}+I_B = I_{D1}\n\\]\n\nwhere \\(I_{D1}\\) is the drain current of M₁.  \nKCL at the output node gives\n\n\\[\nI_{D1}=I_1+I_{D2}.\n\\]\n\nHence\n\n\\[\nI_{D2}=I_{\\text{in}}+I_B-I_1.\n\\]\n\nIf both transistors are in saturation:\n\n\\[\nI_{D1}=\\frac{1}{2}\\mu_n C_{ox}\\left(\\frac{W}{L}\\right)_1\n\\bigl(V_b-V_S-V_{THN}\\bigr)^2\n\\bigl[1+\\lambda_n(V_{\\text{out}}-V_S)\\bigr],\n\\]\n\n\\[\nI_{D2}=\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2\n\\bigl(V_{DD}-V_S-|V_{THP}|\\bigr)^2\n\\bigl[1+\\lambda_p(V_{DD}-V_{\\text{out}})\\bigr].\n\\]\n\nFor a given \\(I_{\\text{in}}\\) these two equations, together with the KCL relation, determine \\(V_S\\) and \\(V_{\\text{out}}\\).\n\n---\n\n## 2. Small‑signal model\n\nDefine the small‑signal quantities:\n\n- \\(v_s\\): AC voltage at the source node of M₁.\n- \\(v_o\\): AC output voltage.\n- \\(G_1 = g_{m1}+g_{mb1}\\) (include \\(g_{mb1}\\) if the NMOS body is not tied to its source).\n- \\(g_{o1}=1/r_{o1}\\), \\(g_{o2}=1/r_{o2}\\).\n- \\(G_L=1/R_L+1/r_{oI_1}\\) if the output sees an external load \\(R_L\\) and/or a finite output resistance \\(r_{oI_1}\\) from \\(I_1\\).\n\nThe AC equivalent gives two nodal equations.\n\n**At the source node:**\n\n\\[\ni_{\\text{in}}=(G_1+g_{o1})v_s-g_{o1}v_o\n\\tag{1}\n\\]\n\n**At the output node:**\n\nThe common‑gate device M₁ injects a current equal to \\(i_{\\text{in}}\\) into the output node. The PMOS M₂ contributes \\(-g_{m2}v_s-g_{o2}v_o\\). Therefore\n\n\\[\ni_{\\text{in}} = g_{m2}v_s+(g_{o2}+G_L)v_o.\n\\tag{2}\n\\]\n\n---\n\n## 3. Small‑signal transresistance \\(R_m=v_o/i_{\\text{in}}\\)\n\nSolving (1) and (2) gives\n\n\\[\n\\boxed{\nR_m=\\frac{v_o}{i_{\\text{in}}}\n=\n\\frac{G_1+g_{o1}-g_{m2}}\n{(g_{o2}+G_L)(G_1+g_{o1})+g_{m2}g_{o1}}\n}\n\\]\n\nA few useful limiting cases:\n\n- **If M₂ is absent or very weak** (\\(g_{m2}\\approx 0\\)):\n\n\\[\nR_m \\approx \\frac{1}{g_{o2}+G_L}\n\\]\n\nwhich is just a common‑gate current buffer feeding the output resistance.\n\n- **With a finite load \\(R_L\\) and \\(r_o\\)’s large**:\n\n\\[\nR_m \\approx \\frac{G_1-g_{m2}}{G_1}\\,R_L\n=\n\\left(1-\\frac{g_{m2}}{G_1}\\right)R_L .\n\\]\n\nSo M₂ reduces the effective transresistance. If \\(g_{m2}>G_1\\) the small‑signal transresistance becomes **negative**, indicating local positive feedback.\n\n- **If \\(g_{m2}=G_1\\) and output resistances are finite**:\n\n\\[\nR_m \\approx \\frac{g_{o1}}{G_1(g_{o1}+g_{o2})}\n\\approx \\frac{1}{G_1}\\cdot\\frac{r_{o2}}{r_{o1}+r_{o2}} .\n\\]\n\n---\n\n## 4. Output resistance\n\nWith the input current source opened (\\(i_{\\text{in}}=0\\)) and a test source applied at the output,\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{1}\n{(g_{o2}+G_L)+\\displaystyle\\frac{g_{m2}g_{o1}}{G_1+g_{o1}}}\n}\n\\]\n\nThe term \\(\\frac{g_{m2}g_{o1}}{G_1+g_{o1}}\\) is the feedback conductance contributed by M₂, because its gate is driven by the source voltage of M₁. A large \\(g_{m2}\\) lowers the output resistance.\n\n---\n\n## 5. Input resistance at the source node\n\nFrom (2),\n\n\\[\nv_s=\\frac{i_{\\text{in}}-(g_{o2}+G_L)v_o}{g_{m2}}\n\\]\n\nso\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{v_s}{i_{\\text{in}}}\n=\n\\frac{1-(g_{o2}+G_L)R_m}{g_{m2}}\n}\n\\]\n\nIf the output is AC‑shorted (\\(G_L\\to\\infty\\), so \\(R_m\\to 0\\)),\n\n\\[\nR_{\\text{in}}\\approx \\frac{1}{g_{m2}} .\n\\]\n\n---\n\n## 6. Physical interpretation\n\n- M₁ is a **common‑gate transistor**: the current injected into its source reappears at its drain.\n- M₂ is a **PMOS common‑source device** whose gate is driven by the same source voltage. It adds a feedback current at the output.\n- The stage is therefore a **current‑input transresistance amplifier**. Its gain is set by the competition between the NMOS source transconductance \\(G_1=g_{m1}+g_{mb1}\\) and the PMOS transconductance \\(g_{m2}\\), divided by the total output conductance.\n\nIf you intended M₂ to be diode‑connected to \\(V_{\\text{out}}\\) rather than to the source node of M₁, let me know—the analysis changes to a simple common‑gate stage with a diode‑connected PMOS load, giving \\(R_m\\approx 1/g_{m2}\\).",
        "format": "markdown",
        "sha256": "e7867ddec67a83513923e08db5c9e68e204ccc4043f5bcaae2d96914ae073d50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Although it identifies M1 as a common-gate NMOS, it puts M2's gate at the input node and its drain at Vout, reversing the actual feedback connections. It therefore misses the Vout-to-input feedback loop and derives the wrong circuit behavior; the isolated 1/gm2 result does not make the analysis correct.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2361,
        "output_tokens": 29531,
        "total_tokens": 31892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2361,
        "output_tokens": 29531,
        "total_tokens": 31892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let me call the common node at the source of \\(M_1\\) / gate of \\(M_2\\) node **\\(X\\)**.\n\n\\[\n\\text{Node }X:\\; M_1\\text{ source},\\; M_2\\text{ gate},\\; I_{\\text{in}},\\; \\text{and the downward bias current source.}\n\\]\n\nA reasonable interpretation of the schematic is:\n\n* \\(M_1\\) = **NMOS** in a **common-gate** configuration  \n  (gate biased at \\(V_b\\), source = current input node \\(X\\), drain = output).\n* \\(M_2\\) = **PMOS** in a **common-source** configuration  \n  (source at \\(V_{DD}\\), gate at \\(X\\), drain = output).\n* \\(I_1\\) = active current-source load at the output.\n* The downward current source at \\(X\\) is a DC bias; for AC it is an open circuit.\n* \\(I_{\\text{in}}\\) is the AC signal current injected into node \\(X\\).\n\nThus the circuit is a **current-input stage** — often used as a current-buffer/current-conveyor output, or as a transimpedance/current-feedback stage.\n\n---\n\n## 1. DC operating point\n\nAt node \\(X\\),\n\n\\[\nI_{\\text{in,DC}} + I_{D1} = I_{\\text{bias}}\n\\qquad\\Longrightarrow\\qquad\nI_{D1}=I_{\\text{bias}}-I_{\\text{in,DC}} .\n\\]\n\nAt the output node,\n\n\\[\nI_{D1}=I_1+I_{D2}\n\\qquad\\Longrightarrow\\qquad\nI_{D2}=I_{D1}-I_1 .\n\\]\n\nFor saturation:\n\n\\[\n\\boxed{\n\\begin{aligned}\nM_1:\\;& V_{\\text{out}} \\ge V_b - V_{THN} \\\\[2pt]\nM_2:\\;& V_{\\text{out}} \\le V_X + |V_{THP}|\n\\end{aligned}}\n\\]\n\nThe source voltage of \\(M_1\\) is approximately\n\n\\[\nV_X \\approx V_b - V_{GS1}\n      = V_b - \\left(V_{THN}+V_{OV1}\\right),\n\\]\n\nwhere \\(V_{OV1}=\\sqrt{2I_{D1}/(\\mu_nC_{ox}(W/L)_1)}\\).  \nIf the NMOS bulk is not tied to its source, include body effect in \\(V_{THN}\\).\n\n---\n\n## 2. Small-signal model\n\nUse the following small-signal parameters:\n\n\\[\nG_{m1}=g_{m1}+g_{mb1}\n\\]\n\n(\\(g_{mb1}\\) is the body-effect transconductance; set it to zero if the bulk is tied to the source of \\(M_1\\)).\n\n\\[\nr_{o1}=\\frac{1}{\\lambda_n I_{D1}},\\qquad\nr_{o2}=\\frac{1}{\\lambda_p I_{D2}},\\qquad\nr_{oI_1}=\\text{output resistance of }I_1 .\n\\]\n\nFor AC:\n\n* \\(V_{DD}\\) is ground.\n* The two current sources at node \\(X\\) are open circuits (except \\(I_{\\text{in}}\\)).\n* \\(I_1\\) is replaced by \\(r_{oI_1}\\) to ground.\n\nThe two important AC node equations are:\n\n**Node \\(X\\):**\n\n\\[\ni_{\\text{in}}\n= (G_{m1}+g_{o1})v_x - g_{o1}v_{\\text{out}}\n\\tag{1}\n\\]\n\n**Output node:**\n\n\\[\n0 = (g_{m2}-G_{m1}-g_{o1})v_x\n    + (g_{o1}+g_{o2}+g_{oI_1})v_{\\text{out}}\n\\tag{2}\n\\]\n\nwhere \\(g_{oi}=1/r_{oi}\\).\n\nIf an external load \\(R_L\\) is connected at the output, replace  \n\\(g_{o2}+g_{oI_1}\\) by \\(G_L = g_{o2}+g_{oI_1}+1/R_L\\).\n\n---\n\n## 3. Key small-signal results\n\n### Transimpedance gain\n\n\\[\n\\boxed{\nA_R=\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n=\n\\frac{G_{m1}+g_{o1}-g_{m2}}\n     {(G_{m1}+g_{o1})(g_{o2}+g_{oI_1})+g_{o1}g_{m2}}\n}\n\\tag{3}\n\\]\n\n*If a load \\(R_L\\) is present, replace \\((g_{o2}+g_{oI_1})\\) by \\(G_L\\).*\n\nThe sign is negative when the PMOS gain dominates, i.e. \\(g_{m2}>G_{m1}+g_{o1}\\): a positive input current raises \\(v_x\\), turns \\(M_2\\) “harder off,” and pulls \\(V_{\\text{out}}\\) down.\n\n### Input resistance at node \\(X\\)\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{g_{o1}+g_{o2}+g_{oI_1}}\n     {(G_{m1}+g_{o1})(g_{o2}+g_{oI_1})+g_{o1}g_{m2}}\n}\n\\tag{4}\n\\]\n\n### Output resistance\n\nWith \\(i_{\\text{in}}=0\\), node \\(X\\) is AC-floating, so \\(M_1\\) does not contribute to the output resistance:\n\n\\[\n\\boxed{\nR_{\\text{out}} = r_{o2}\\parallel r_{oI_1}\n}\n\\tag{5}\n\\]\n\n(If an external load \\(R_L\\) is attached, the total output resistance becomes \\(r_{o2}\\parallel r_{oI_1}\\parallel R_L\\).)\n\n### Short-circuit current gain\n\nIf the output is AC-shorted (\\(v_{\\text{out}}=0\\)), the current delivered to the short is\n\n\\[\n\\boxed{\nA_i=\\frac{i_{\\text{out}}}{i_{\\text{in}}}\n=\n\\frac{G_{m1}+g_{o1}-g_{m2}}{G_{m1}+g_{o1}}\n\\approx 1-\\frac{g_{m2}}{G_{m1}}\n}\n\\tag{6}\n\\]\n\nSo when \\(g_{m2}\\approx G_{m1}\\), the two transistors supply nearly canceling currents at the output, leaving the stage as a high-impedance voltage node.\n\n---\n\n## 4. Useful limiting cases\n\n| Case | Approximate transimpedance | Interpretation |\n|------|----------------------------|----------------|\n| \\(g_{m2}=0\\) (no \\(M_2\\)) | \\(A_R\\approx r_{o2}\\parallel r_{oI_1}\\) | Simple common-gate current buffer |\n| Strong PMOS, \\(g_{m2}\\gg G_{m1}\\) | \\(A_R\\approx -r_{o1}\\) | Active-feedback transimpedance stage |\n| Output loaded by \\(R_L\\), \\(R_L\\ll r_{o1},r_{o2}\\) | \\(A_R\\approx \\left(1-\\frac{g_{m2}}{G_{m1}}\\right)R_L\\) | Current buffer into \\(R_L\\) |\n| Matched \\(g_{m2}=G_{m1}\\) | \\(A_R\\approx \\dfrac{g_{o1}}{G_{m1}(g_{o1}+g_{o2}+g_{oI_1})}\\) | Output currents cancel; node is high-impedance |\n\n---\n\n## 5. Frequency response\n\nThe dominant pole is usually at the high-impedance output node:\n\n\\[\n\\boxed{\nf_{p,\\text{out}}\\approx \\frac{1}{2\\pi R_{\\text{out}}C_{\\text{out}}}\n}\n\\]\n\nwhere\n\n\\[\nC_{\\text{out}}\\approx\nC_{db1}+C_{db2}+C_{gd1}+C_{gd2}\n+C_{\\text{load}}+C_{\\text{node of }I_1}.\n\\]\n\nNode \\(X\\) is a low-impedance node, so its pole is at a much higher frequency:\n\n\\[\nf_{p,X}\\approx \\frac{1}{2\\pi R_{\\text{in}}C_X}.\n\\]\n\nMiller multiplication of \\(C_{gd2}\\) is small because \\(v_x\\) is small (node \\(X\\) is low impedance).\n\n---\n\n## 6. Practical notes\n\n1. **Body effect on \\(M_1\\)** lowers the input resistance and raises the effective transconductance: use \\(G_{m1}=g_{m1}+g_{mb1}\\).\n2. **Current-source output resistances** matter: finite \\(r_{oI_1}\\) reduces \\(R_{\\text{out}}\\) and the gain.\n3. **Biasing headroom**: \\(V_{\\text{out}}\\) must satisfy both saturation inequalities simultaneously, so \\(V_b-V_{THN}\\le V_{\\text{out}}\\le V_X+|V_{THP}|\\).\n4. The circuit can operate in a **class-AB** fashion: a bidirectional \\(I_{\\text{in}}\\) is steered between \\(M_1\\) (sinking) and \\(M_2\\) (sourcing), making it useful as a current-mode output stage or current conveyor.\n\nIf you provide transistor sizes, bias currents, and technology parameters, the numerical gain, input/output resistances, and poles can be computed directly.",
        "format": "markdown",
        "sha256": "f88cb6c4cbea3f94984bc56a33b8fe517c2c4f0089496646477e52a949796876"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M2’s connections: it places its gate at the input node and drain at the output, rather than gate at Vout and drain at the input node. Consequently it misses the feedback loop and derives results for a different topology; generic current-buffer terminology does not recover the essential analysis.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2361,
        "output_tokens": 20170,
        "total_tokens": 22531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18061,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2361,
        "output_tokens": 20170,
        "total_tokens": 22531,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18061,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Below is a compact, but complete, small-signal and DC analysis of the circuit.\n\n---\n\n## 1. Circuit identification\n\n| Device | Type | Role |\n|---|---|---|\n| **\\(M_1\\)** | NMOS | Common-gate transistor. Gate is biased at DC voltage \\(V_b\\) (AC ground), source is the input node \\(X\\), drain is the output. |\n| **\\(M_2\\)** | PMOS | Common-source active load. Source is at \\(V_{DD}\\) (AC ground), gate is driven by node \\(X\\), drain is the output. |\n| **\\(I_{in}\\)** | Current source | Small-signal input current injected into node \\(X\\). |\n| **Downward current source** | \\(I_B\\) | DC bias current for \\(M_1\\) (drawn from node \\(X\\) to ground). |\n| **\\(I_1\\)** | Current source | DC load/bias current at the output. For AC it is an open circuit if ideal. |\n\nNode \\(X\\) is therefore a **low-impedance current-summing node**, and \\(V_{out}\\) is a high-impedance voltage output. The stage is best viewed as a **current-input transimpedance amplifier** (or active-feedback common-gate stage).\n\n---\n\n## 2. DC operating point\n\nAssume \\(I_{in}\\) has zero DC component and the current sources are ideal.\n\n1. **Source node \\(X\\):**\n   \\[\n   I_{D1}=I_B\n   \\]\n   so \\(M_1\\) is biased at \\(I_B\\).\n\n2. **Gate-source voltage of \\(M_1\\):**\n   \\[\n   V_X = V_b - V_{GS1}(I_B)\n   \\]\n   where\n   \\[\n   V_{GS1}=V_{TH1}+\\sqrt{\\frac{2I_B}{\\mu_n C_{ox}(W/L)_1}}\n   \\]\n   and \\(V_{TH1}\\) includes body effect because the source of \\(M_1\\) is not at ground:\n   \\[\n   V_{TH1}=V_{TH0}+\\gamma\\!\\left(\\sqrt{2\\phi_F+V_X}-\\sqrt{2\\phi_F}\\right).\n   \\]\n\n3. **Output node:**\n   \\[\n   I_{D2}=I_{D1}-I_1 = I_B-I_1\n   \\]\n   so we must have \\(I_B>I_1\\) for \\(M_2\\) to carry positive current.\n\n4. **Gate-source voltage of \\(M_2\\):**\n   \\[\n   V_{SG2}=V_{DD}-V_X\n   \\]\n   and\n   \\[\n   I_{D2}=\\frac{1}{2}\\mu_p C_{ox}\\left(\\frac{W}{L}\\right)_2\n   \\bigl(V_{SG2}-|V_{THp}|\\bigr)^2\\bigl(1+\\lambda_p(V_{DD}-V_{out})\\bigr).\n   \\]\n   This equation sets the DC value of \\(V_{out}\\).\n\n5. **Saturation checks:**\n   \\[\n   V_{DS1}=V_{out}-V_X \\ge V_{GS1}-V_{TH1}\n   \\]\n   \\[\n   V_{SD2}=V_{DD}-V_{out} \\ge V_{SG2}-|V_{THp}|\n   \\]\n\n---\n\n## 3. Small-signal model\n\nDefine the small-signal parameters:\n\n- For \\(M_1\\): \\(g_{m1},\\; g_{mb1},\\; r_{o1}\\)\n- For \\(M_2\\): \\(g_{m2},\\; r_{o2}\\)\n\nLet\n\n\\[\nG_{m1}=g_{m1}+g_{mb1},\\qquad\nG_1=G_{m1}+g_{o1}=g_{m1}+g_{mb1}+\\frac{1}{r_{o1}}.\n\\]\n\nThe AC equivalent has the current sources open. Two KCL equations are enough:\n\n### Node \\(X\\)\n\\[\nI_{in}= -G_1 v_x + g_{o1}v_{out}\n\\tag{1}\n\\]\n\n### Output node\nBecause \\(I_1\\) is AC-open, the drain current of \\(M_1\\) must equal the drain current of \\(M_2\\):\n\n\\[\n(g_{o1}-g_{o2})v_{out}=(G_1-g_{m2})v_x\n\\tag{2}\n\\]\n\n---\n\n## 4. Small-signal results\n\nSolving (1) and (2):\n\n### Input resistance\n\\[\n\\boxed{\nR_{in}=\\frac{v_x}{I_{in}}\n=\n\\frac{g_{o1}-g_{o2}}\n{G_1 g_{o2}-g_{o1}g_{m2}}\n}\n\\]\n\n### Transimpedance gain\n\\[\n\\boxed{\nR_T=\\frac{v_{out}}{I_{in}}\n=\n\\frac{G_1-g_{m2}}\n{G_1 g_{o2}-g_{o1}g_{m2}}\n}\n\\]\n\n### Output resistance (with \\(I_{in}\\) open)\n\\[\n\\boxed{\nR_{out}\n=\n\\frac{1}{\\displaystyle \\frac{g_{m2}}{G_1}g_{o1}-g_{o2}}\n=\n\\frac{G_1}{g_{m2}g_{o1}-G_1g_{o2}}\n}\n\\]\n\n---\n\n## 5. Important special case: matched output resistances\n\nIf the two transistors are sized/biased so that\n\n\\[\nr_{o1}=r_{o2}=r_o \\qquad\\Bigl(g_{o1}=g_{o2}=g_o\\Bigr),\n\\]\n\nthen the above expressions simplify dramatically:\n\n\\[\n\\boxed{R_{in}=0}\n\\]\n\n\\[\n\\boxed{R_T=r_o}\n\\]\n\nNode \\(X\\) becomes a **virtual ground** for the input current. The input current is forced to flow through \\(M_1\\), and the output voltage develops across \\(r_o\\).\n\nTo keep the output resistance positive in this matched case, choose\n\n\\[\ng_{m2}>G_1 \\approx g_{m1}+g_{mb1}.\n\\]\n\nIf \\(g_{m2}<G_1\\), the small-signal output resistance becomes negative, which can cause peaking or instability unless it is overwhelmed by the finite output resistance of \\(I_1\\) or by the next stage’s load.\n\n---\n\n## 6. Effect of a finite load resistance\n\nIf the output sees a finite resistance \\(R_L\\) to AC ground (for example, the finite output resistance of \\(I_1\\)), replace\n\n\\[\ng_{o2}\\;\\rightarrow\\;g_{o2}+g_L,\\qquad g_L=\\frac{1}{R_L}.\n\\]\n\nIn the limit \\(R_L\\ll r_{o1},r_{o2}\\),\n\n\\[\nR_T \\approx \\frac{g_{m2}-G_1}{G_1}R_L,\n\\qquad\nR_{in}\\approx -\\frac{1}{G_1}.\n\\]\n\nSo a low load resistance destroys the high-gain, zero-input-resistance behavior; the circuit is intended to drive a high-impedance node.\n\n---\n\n## 7. Frequency response (qualitative)\n\nThe dominant poles come from the capacitances at node \\(X\\) and at \\(V_{out}\\):\n\n- **Input pole:** because \\(R_{in}\\) can be made very small, the pole at node \\(X\\) is usually at very high frequency:\n  \\[\n  \\omega_{pX}\\approx \\frac{1}{R_{in}C_X}.\n  \\]\n\n- **Output pole:** set by the effective output resistance and the total capacitance at \\(V_{out}\\):\n  \\[\n  \\omega_{p,out}\\approx \\frac{1}{R_{out,eff}C_{out}}.\n  \\]\n\nThe bandwidth is often limited by the output node. Because the stage can exhibit negative resistance, careful layout and device sizing are needed to avoid unwanted peaking or oscillation.\n\n---\n\n## Bottom line\n\nThe circuit is a **current-input transimpedance amplifier**. With matched transistor output resistances and \\(g_{m2}\\approx g_{m1}+g_{mb1}\\), it gives\n\n\\[\nR_{in}\\approx 0,\\qquad R_T\\approx r_{o1}.\n\\]\n\nIt is well suited for high-speed current-sensing applications such as optical-receiver front ends, where the photodiode is modeled as a current source \\(I_{in}\\).\n\nIf you need a specific numerical example, noise analysis, or a design-sizing procedure, let me know.",
        "format": "markdown",
        "sha256": "7ebd43985716bd5d12966c40485f8fb1e236cfe1c82a5c2619df65040589b5d5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M2’s connections: its gate is driven by Vout and its drain feeds the input node, not the reverse. This misses the defining feedback loop and gives incorrect input-resistance and transimpedance results.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2361,
        "output_tokens": 34897,
        "total_tokens": 37258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2361,
        "output_tokens": 34897,
        "total_tokens": 37258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The circuit is a three‑stage ring oscillator. The capacitors \\(C_L\\) are load capacitors from each inverter output to ground, not DC-blocking capacitors in series with the signal.\n\nAs the load capacitors become arbitrarily large:\n\n* Each inverter’s delay increases, because it must charge/discharge a larger capacitance through its finite output resistance.\n* The oscillation frequency drops roughly as  \n  \\[\n  f \\;\\approx\\; \\frac{1}{2N\\,\\tau} \\;\\approx\\; \\frac{1}{6\\,R_{\\text{out}}C_L}\n  \\]\n  where \\(N=3\\) is the number of stages and \\(\\tau \\sim R_{\\text{out}}C_L\\).\n* The phase condition for oscillation is still met: the three inverters provide \\(180^\\circ\\) of DC inversion, and the capacitive loads supply the additional frequency‑dependent phase shift needed around the loop.\n* Loop gain remains greater than unity at the oscillation frequency.\n\nSo the circuit does **not** stop oscillating; it simply oscillates at an arbitrarily low frequency as \\(C_L \\to \\infty\\).",
        "format": "markdown",
        "sha256": "aec9682e85b06b8110fe0497aa0305e0568d3d2b1b9db2d4851b4f663012c06b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal loading at all three nodes does not stop oscillation and gives the valid delay-based result that frequency falls roughly as 1/CL. Its phase explanation is consistent with the same conclusion.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2388,
        "output_tokens": 1793,
        "total_tokens": 4181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2388,
        "output_tokens": 1793,
        "total_tokens": 4181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1549,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No—under the usual idealized assumptions, the circuit does not stop oscillating just because the load capacitors become very large.**\n\nHere is why:\n\n1. **The capacitors set the speed, not the existence of oscillation.**  \n   The circuit is a three-stage ring oscillator. Each inverter has an output resistance \\(R_{\\text{on}}\\) that, together with the load capacitance \\(C_L\\), creates an RC delay:\n   \\[\n   t_d \\propto R_{\\text{on}} C_L\n   \\]\n   With three stages, the period is roughly proportional to \\(t_d\\). As \\(C_L \\to \\infty\\),\n   \\[\n   f_{\\text{osc}} \\propto \\frac{1}{R_{\\text{on}} C_L} \\to 0\n   \\]\n   The oscillator simply runs **arbitrarily slowly**.\n\n2. **The DC operating point remains unstable.**  \n   At DC the capacitors are open circuits, so they do not change the fact that there are an odd number of inversions around the loop. That gives a net \\(180^\\circ\\) phase shift at DC and no stable DC state. Any small perturbation grows regeneratively, so oscillation must occur.\n\n3. **The small-signal startup condition is independent of \\(C_L\\).**  \n   Modeling each inverter as a single-pole stage,\n   \\[\n   H(s) = -\\frac{A_0}{1+s/\\omega_p}, \\qquad \\omega_p = \\frac{1}{R_{\\text{on}}C_L}\n   \\]\n   The loop gain around three stages is \\(H^3(j\\omega)\\). The phase condition gives\n   \\[\n   \\frac{\\omega}{\\omega_p} = \\sqrt{3}\n   \\]\n   and the magnitude condition at that frequency is\n   \\[\n   |H^3(j\\omega)| = \\frac{A_0^3}{8}\n   \\]\n   So startup requires \\(A_0 > 2\\). Notice that \\(C_L\\) has canceled out. Moving the pole to a lower frequency by increasing \\(C_L\\) lowers the oscillation frequency but does not change the gain margin.\n\n### Caveats\nIn a **real** implementation, if \\(C_L\\) is made ridiculously large:\n- leakage currents, threshold mismatch, and noise can eventually dominate,\n- the inverter may not be able to supply enough current or the capacitor’s own leakage/ESR may matter,\n\nand under those practical constraints the oscillator could become unreliable or stop. But in the ideal circuit model, arbitrarily large capacitors only make the oscillation frequency approach zero; they do not inherently prevent oscillation.",
        "format": "markdown",
        "sha256": "02efa88d6f297c6d2ecb1d5b74030e6f936c51a98c653eadb24aa2779932c842"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that loading all three nodes lowers the oscillation frequency without removing the oscillation condition. Both the RC-delay argument and the small-signal phase/gain analysis support this; the extra DC and practical caveats do not change the essential result.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2386,
        "output_tokens": 4854,
        "total_tokens": 7240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4293,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2386,
        "output_tokens": 4854,
        "total_tokens": 7240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4293,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. Making the load capacitors \\(C_L\\) very large does **not** make the ring oscillator stop oscillating; it only makes the oscillation frequency very low.\n\nWhy:\n\n* Each inverter plus its load capacitor acts like an inverting first‑order RC stage.\n* In a three‑stage ring the loop requires a total phase shift of \\(360^\\circ\\). The static inversion of the three inverters gives \\(3\\times180^\\circ = 540^\\circ\\) (equivalent to \\(180^\\circ\\)), so the capacitors must supply the extra delay to bring the total phase to a multiple of \\(360^\\circ\\).\n* If you increase \\(C_L\\), the RC time constant increases, so the required phase lag is reached at a lower frequency. The oscillation frequency falls roughly as\n\n\\[\nf_{\\text{osc}} \\propto \\frac{1}{R C_L}\n\\]\n\n* The loop gain at the oscillation condition is set by the inverter gain, not directly by the capacitor size (with the simple model, the magnitude condition at the phase‑crossing frequency gives \\((A_0/2)^3 \\ge 1\\), i.e. \\(A_0 \\ge 2\\)). So as long as the inverter gain is sufficient, the circuit still meets the Barkhausen criteria.\n\nSo as \\(C_L \\to \\infty\\), the period becomes arbitrarily long, but the circuit still oscillates. Only in the unphysical ideal limit of truly infinite capacitance would the nodes never change and oscillation effectively freeze.",
        "format": "markdown",
        "sha256": "b70f2f943f68cb0709314b9dbdb9daba1aa3508bcc9ba3b479a746dcbfc03b06"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that loading all three nodes lowers the oscillation frequency without stopping oscillation, and supports this with valid RC-delay and small-signal gain reasoning. The infinite-capacitance caveat does not undermine the answer for arbitrarily large finite capacitances.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2388,
        "output_tokens": 2097,
        "total_tokens": 4485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2388,
        "output_tokens": 2097,
        "total_tokens": 4485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1870,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the circuit shown — a **3‑stage CMOS ring oscillator** — doubling each load capacitor \\(C_L\\) has the following effect:\n\n1. **The oscillation frequency drops by about a factor of 2.**  \n   Each inverter’s delay is roughly proportional to \\(R_{\\text{on}}C_L\\), so doubling \\(C_L\\) doubles every stage delay and halves \\(f_0\\).\n\n2. **The phase noise improves (gets smaller).**  \n   The thermal noise voltage on each capacitor is \\(\\sqrt{kT/C_L}\\), so it falls by \\(\\sqrt{2}\\). More importantly, the charge packet per transition, \\(q_{\\max}\\approx C_L V_{DD}\\), doubles, making the same device noise less significant in phase.\n\nUsing the standard ring‑oscillator phase‑noise expression,\n\n\\[\nL(\\Delta f)\\;\\propto\\;\\frac{kT}{P_{\\text{diss}}}\\left(\\frac{f_0}{\\Delta f}\\right)^2\n\\]\n\nand noting that for fixed transistors and supply the dynamic power is roughly \\(P_{\\text{diss}}\\approx N C_L V_{DD}^2 f_0\\), which stays about constant when \\(C_L\\) doubles and \\(f_0\\) halves, the result is\n\n\\[\nL(\\Delta f)\\;\\propto\\;\\frac{1}{C_L^2}\n\\]\n\nSo **doubling the three capacitors lowers the phase noise by roughly \\(6\\ \\text{dB}\\)** at a given offset frequency.\n\n**Caveat:** If you also retune the oscillator back to its original frequency (by increasing current/power), the improvement would be about \\(3\\ \\text{dB}\\). With only the capacitors changed, expect about **6 dB better phase noise**.",
        "format": "markdown",
        "sha256": "e7196a009998c671cdc24509159394e5e4f3f151e587152f1650bed49eb93766"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and gives about a fourfold (6 dB) phase-noise reduction at a fixed offset. Its supporting frequency-scaling argument matches the golden solution; the retuning caveat is secondary.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2384,
        "output_tokens": 7491,
        "total_tokens": 9875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2384,
        "output_tokens": 7491,
        "total_tokens": 9875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7117,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For that 3‑stage ring oscillator, doubling each \\(C_L\\) has two main effects:\n\n1. **Oscillation frequency drops by a factor of 2.**  \n   The delay of each stage is roughly proportional to \\(R_{\\text{on}}C_L\\), so the period doubles and\n\n   \\[\n   f_0 \\;\\propto\\; \\frac{1}{C_L}\n   \\]\n\n   The new frequency is about **half** the original.\n\n2. **Phase noise improves by about 6 dB.**  \n   In the thermal‑noise (\\(1/f^2\\)) region, a ring oscillator’s phase noise is approximately\n\n   \\[\n   \\mathcal{L}(\\Delta f) \\;\\propto\\; \\frac{kT}{P}\\left(\\frac{f_0}{\\Delta f}\\right)^2\n   \\]\n\n   where \\(P\\) is the dissipated power.  \n   Because \\(P \\approx N C_L V_{DD}^2 f_0\\), doubling \\(C_L\\) while \\(f_0\\) halves keeps \\(P\\) roughly constant. With \\(P\\) unchanged and \\(f_0\\) halved,\n\n   \\[\n   \\mathcal{L}_{\\text{new}}(\\Delta f) \\approx \\frac{1}{4}\\,\\mathcal{L}_{\\text{old}}(\\Delta f)\n   \\]\n\n   which is a **6 dB reduction** in phase noise.\n\nSo the trade‑off is: **lower phase noise by ~6 dB, but at half the oscillation frequency.**\n\n*(If you also doubled the bias current to bring \\(f_0\\) back to its original value, the improvement would be only ~3 dB, because power would double.)*",
        "format": "markdown",
        "sha256": "e89974c297554d292a6569a6386639c6c07ee65d7775e591e9de13ff539e963e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset, matching the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2386,
        "output_tokens": 7904,
        "total_tokens": 10290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2386,
        "output_tokens": 7904,
        "total_tokens": 10290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the three‑stage ring oscillator in the figure, doubling each load capacitor \\(C_L\\) makes the oscillator run slower and generally **improves (lowers) the phase noise**.\n\nWhat exactly happens depends on whether the inverter drive current is left alone or scaled:\n\n### 1. Same inverter current / same power\nIf the transistor sizes and bias current are unchanged:\n\n- The oscillation frequency drops by about a factor of 2, since  \n  \\[\n  f_0 \\propto \\frac{g_m}{N C_L}\n  \\]\n- The phase noise at a given offset frequency improves by about **6 dB** (a factor of 4).\n\nWhy: the total charge swing on each node, \\(q_{\\max}=C_L V_{\\text{swing}}\\), doubles, so the same noise charge produces a smaller phase shift.\n\n### 2. Current increased to keep the same frequency\nIf you increase the inverter current so that \\(f_0\\) stays the same:\n\n- Power dissipation increases proportionally with \\(C_L\\).\n- The phase noise improves by about **3 dB** (a factor of 2).\n\n### Quick answer\nFor the usual case where you simply double the capacitors **without changing the drive current**, the oscillator frequency falls by ~2× and the phase noise improves by roughly **6 dB** at the same offset frequency.",
        "format": "markdown",
        "sha256": "62eeb75d2fb7880a074f488b5cfbaebe852e16d6674a690cbb84a4d8d3b30162"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about 6 dB (a factor of four) at a fixed offset, with a valid charge-based explanation.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2386,
        "output_tokens": 9201,
        "total_tokens": 11587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2386,
        "output_tokens": 9201,
        "total_tokens": 11587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No — the ring oscillator still oscillates, it just oscillates more slowly as \\(C_L\\) is made larger.**\n\nWhy:\n\n1. **It is an odd-stage ring oscillator.**  \n   Three inverters in a loop provide the necessary DC inversion (180° phase shift) around the loop. The inverters also act as amplifiers, so the loop has gain.\n\n2. **\\(C_L\\) is an AC load, not a DC short.**  \n   At DC the capacitor is an open circuit, so it does not change the static switching threshold or the loop’s DC gain. It only adds extra capacitance that must be charged/discharged during transitions.\n\n3. **Effect of large \\(C_L\\).**  \n   The extra capacitance increases the RC time constant at that node, increasing the propagation delay and lowering the oscillation frequency:\n\n   \\[\n   f_{\\text{osc}} \\propto \\frac{1}{\\tau} \\quad \\text{with} \\quad \\tau \\propto R_{\\text{out}}C_L\n   \\]\n\n   As \\(C_L \\to \\infty\\), the period of oscillation grows without bound and the frequency tends toward zero.\n\n4. **Oscillation condition is still met.**  \n   The Barkhausen criterion can still be satisfied: at some low frequency the total phase shift around the loop is \\(360^\\circ\\) (or \\(0^\\circ\\)) and the loop gain magnitude is greater than unity. The capacitor adds phase lag, which simply shifts the oscillation frequency downward rather than preventing oscillation.\n\n### Practical caveat\nIn a real circuit, very large \\(C_L\\) requires large drive current and produces a very low oscillation frequency. Leakage, finite output resistance, and other non-ideal effects can eventually make the oscillation impractical or stop it, but in the ideal circuit model, **arbitrarily large \\(C_L\\) does not make the oscillator fail to oscillate** — it only makes it oscillate arbitrarily slowly.",
        "format": "markdown",
        "sha256": "7c40b66f8ed38658a11f05cdb6b51f0768dc124aa5cbd551f237cc1d224c77a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is opposite to the golden solution: a sufficiently large load on one node can create a dominant pole and prevent oscillation, rather than merely lowering its frequency. The answer recognizes the ring topology and capacitive delay but incorrectly claims the Barkhausen condition remains satisfied.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 2723,
        "total_tokens": 5002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2307,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 2723,
        "total_tokens": 5002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2307,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The circuit will still oscillate, even if \\(C_L\\) is made arbitrarily large.\n\nIt is a 3-stage ring oscillator, and three inversions give the loop no stable DC state, so it must oscillate. The capacitor simply adds load to one node, increasing that stage’s RC delay:\n\n\\[\n\\tau \\sim R_{\\text{on}}C_L\n\\]\n\nA larger \\(C_L\\) therefore lowers the oscillation frequency. In the ideal limit \\(C_L\\to\\infty\\), the frequency approaches zero — the circuit oscillates more and more slowly — but it does not “fail” to oscillate.",
        "format": "markdown",
        "sha256": "95c12e0dc197614dbfcd0ea9cb9fbe66e0bb228177e884c1460b72fd24f0a0de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: a sufficiently large load on one node can create a dominant pole and prevent oscillation. It correctly notes that the capacitor increases delay and lowers frequency, but incorrectly assumes a three-inversion ring must oscillate even as the loop gain and phase condition fail.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 2538,
        "total_tokens": 4817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 2538,
        "total_tokens": 4817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes — if \\(C_L\\) is made large enough, the circuit will stop oscillating.**\n\nThe figure is a three‑stage ring oscillator. For a real inverter (finite gain \\(A\\) and finite output resistance \\(R\\)), each stage can be modeled as a single pole:\n\n\\[\nH(s)=\\frac{-A}{1+sRC}\n\\]\n\nWith the extra load \\(C_L\\) on one node, the loop gain becomes\n\n\\[\nL(s)=\\frac{(-A)^3}{\\bigl[1+sR(C+C_L)\\bigr](1+sRC)^2}\n\\]\n\nFor oscillation, the Barkhausen criterion requires \\(|L(j\\omega)|\\ge 1\\) and a total phase shift of \\(0^\\circ\\) (or \\(360^\\circ\\)) around the loop. The phase condition is\n\n\\[\n\\tan^{-1}\\!\\bigl[\\omega R(C+C_L)\\bigr]+2\\tan^{-1}(\\omega RC)=180^\\circ\n\\]\n\nAs \\(C_L\\to\\infty\\), the first term approaches \\(90^\\circ\\). To reach the required \\(180^\\circ\\), the two unloaded stages must supply the remaining \\(\\approx 90^\\circ\\), which forces the operating frequency to be near their pole, i.e. \\(\\omega\\approx 1/(RC)\\).\n\nBut at that frequency the heavily loaded stage is greatly attenuated:\n\n\\[\n\\left|\\frac{-A}{1+j\\omega R(C+C_L)}\\right|\\approx \\frac{A\\,C}{C_L}\\to 0\n\\]\n\nSo the loop gain magnitude drops roughly as \\(1/C_L\\) and eventually falls below unity:\n\n\\[\n|L(j\\omega)| \\approx \\frac{A^3 C}{C_L}<1\n\\]\n\nOnce \\(|L|<1\\), the Barkhausen condition cannot be satisfied, and the circuit settles to a stable (metastable) DC point instead of oscillating.\n\nSo an **arbitrarily large** \\(C_L\\) will kill the oscillation in a practical, finite‑gain inverter implementation. (Only in an idealized model with infinite gain and zero output resistance would the oscillator simply slow down forever.)",
        "format": "markdown",
        "sha256": "00691119ba4a8e8953aae6b562cf7874f2030ed8559e7bdb4848feff460dd6ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that loading only one node creates a dominant pole and excessive loop-gain roll-off, so for sufficiently large CL the loop cannot sustain oscillation. The approximate phase and gain analysis supports the essential conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 18060,
        "total_tokens": 20339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 18060,
        "total_tokens": 20339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17589,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **3‑stage single‑ended CMOS ring oscillator**.\n\nIf the widths of **both the NMOS and PMOS** devices are doubled (with lengths unchanged), the phase noise **improves by about 3 dB** — i.e. it is reduced to roughly one‑half.\n\nWhy:\n\n- The load capacitance at each node is dominated by transistor capacitances, so it **roughly doubles**.\n- The drive current of each inverter also **doubles** because it is proportional to transistor width.\n- Therefore the inverter delay \\(t_d \\propto CV/I\\) stays about the same, and the oscillation frequency is nearly unchanged.\n- Transistor noise current spectral density is proportional to \\(g_m\\), so it **doubles**.\n- The charge swing per node, \\(q_{\\max}=C_L V_{DD}\\), also **doubles**.\n- Ring‑oscillator phase noise scales roughly as  \n  \\[\n  \\mathcal{L}(\\Delta f)\\propto \\frac{\\overline{i_n^2}}{q_{\\max}^2}\n  \\]\n  so the new phase noise is\n  \\[\n  \\frac{2}{(2)^2}=\\frac{1}{2}\n  \\]\n  of the original, a **3 dB improvement**.\n\nAs a side effect, power dissipation doubles because the capacitance doubles while the frequency stays about the same.\n\n*Caveat:* if there are significant non‑scaling parasitic capacitances (wiring, fixed loads), the frequency will rise and the exact phase‑noise improvement may differ slightly from 3 dB.",
        "format": "markdown",
        "sha256": "c1ecb0be79bbaa68fe20d5137068c76d956bb73ca4911fad3ba872c5c71159a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts about a 3 dB phase-noise reduction and gives the valid scaling argument: noise-current power doubles while node charge doubles, reducing the noise-to-signal ratio by half.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3609,
        "output_tokens": 5726,
        "total_tokens": 9335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3609,
        "output_tokens": 5726,
        "total_tokens": 9335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5377,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure shows a three‑stage CMOS ring oscillator. If both the NMOS and PMOS transistor widths are doubled while the lengths and supply voltage $V_{DD}$ remain unchanged:\n\n* **Oscillation frequency stays roughly the same.** Doubling the widths doubles both the drive current ($I \\propto W$) and the device capacitances ($C \\propto W$), so the per‑stage delay $\\tau \\approx CV/I$ is essentially unchanged.\n* **Power dissipation doubles.** Since $P \\approx CV_{DD}^2 f_{osc}$ and $C$ doubles while $f_{osc}$ stays roughly constant, the oscillator consumes about twice the power.\n* **Phase noise decreases by approximately 3 dB.** In a ring oscillator, phase noise is approximately inversely proportional to the signal power (or total power). Doubling the power therefore halves the phase‑noise power spectral density:\n\n\\[\n10\\log_{10}\\left(\\frac{1}{2}\\right) \\approx -3\\ \\text{dB}\n\\]\n\nSo doubling the NMOS and PMOS widths improves the phase noise by roughly **3 dB**.",
        "format": "markdown",
        "sha256": "386c9ce3b7f44298c30fc796810d9eaf3977c977fe1e0440948d0bea35cf56e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB reduction and the matching current/capacitance and power scaling. Its inverse-signal-power explanation is an acceptable approximate justification and does not rely on the false claim that wider devices generate less noise.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3609,
        "output_tokens": 7256,
        "total_tokens": 10865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3609,
        "output_tokens": 7256,
        "total_tokens": 10865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of both the NMOS and PMOS devices generally **reduces (improves) the phase noise**.\n\nWhy:\n\n* **More drive current / lower on‑resistance:** Wider transistors have higher transconductance and can charge/discharge the node capacitances more vigorously.\n* **Power increases faster than noise:** With device capacitance scaling roughly with width, the oscillation frequency stays about the same, while the power consumption roughly doubles. Thermal phase noise is inversely related to the oscillator power, so doubling the power tends to lower phase noise by about **3 dB**.\n* **Flicker noise also tends to improve** because larger gate area reduces \\(1/f\\) noise.\n\nCaveat: the exact improvement depends on whether the load is dominated by device capacitance (frequency stays roughly constant) or by fixed wiring/external capacitance. But the usual answer for this CMOS ring oscillator is:\n\n**Phase noise decreases/improves.**",
        "format": "markdown",
        "sha256": "6851a3a83001482aa3b16869700b8dffc7d2c5ee0d7856783d4f9a14f2eac0bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the required approximately 3 dB phase-noise reduction and a consistent width/current/capacitance scaling explanation.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3609,
        "output_tokens": 2902,
        "total_tokens": 6511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3609,
        "output_tokens": 2902,
        "total_tokens": 6511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2696,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the 3‑stage ring oscillator shown, assume each inverter is biased at its switching threshold and that the NMOS and PMOS devices are matched. Let each transistor have transconductance \\(g_m\\) and output conductance \\(g_o=1/r_o\\).\n\nBecause the supply perturbation \\(V_x\\) is applied equally to all three inverters and the ring is symmetric, all three inverter outputs move by the same small‑signal voltage \\(v\\).\n\nFor this common‑mode excitation, every transistor has its gate at the same potential as its drain, so each MOSFET is **diode‑connected**. The small‑signal resistance of one diode‑connected MOSFET is\n\n\\[\nr_{\\text{diode}}=\\frac{1}{g_m+g_o}.\n\\]\n\nEach inverter therefore presents a path from the supply to ground consisting of a PMOS diode in series with an NMOS diode:\n\n\\[\nR_{\\text{stage}}=\\frac{1}{g_m+g_o}+\\frac{1}{g_m+g_o}\n               =\\frac{2}{g_m+g_o}.\n\\]\n\nThe three identical stages are in parallel as seen from the supply node, so\n\n\\[\n\\boxed{R_X=\\frac{R_{\\text{stage}}}{3}\n      =\\frac{2}{3\\left(g_m+g_o\\right)}\n      =\\frac{2}{3}\\left(r_o \\parallel \\frac{1}{g_m}\\right)}\n\\]\n\nIf channel‑length modulation is neglected (\\(r_o \\to \\infty\\)), this simplifies to\n\n\\[\n\\boxed{R_X \\approx \\frac{2}{3g_m}}.\n\\]\n\nSo the small‑signal resistance looking into the supply node of this three‑stage ring oscillator is approximately \\(\\frac{2}{3g_m}\\).",
        "format": "markdown",
        "sha256": "4df864af1975eafa1a902eadb967f7edb05128b1c1803da2f4c3cd7c293b7d8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static diode-connected MOS derivation is internally consistent, but it ignores the oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3435,
        "output_tokens": 13997,
        "total_tokens": 17432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3435,
        "output_tokens": 13997,
        "total_tokens": 17432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the three inverters are **identical, matched CMOS inverters biased at their switching threshold**, model each transistor with transconductance \\(g_m\\) and output conductance \\(g_o=1/r_o\\).\n\nApply a small-signal test voltage \\(v_x\\) to the common supply node and let each inverter output move by \\(v_o\\). Because the ring is symmetric, all three outputs move by the same amount.\n\nAt each inverter output, the PMOS and NMOS small-signal currents must balance:\n\n\\[\n(g_m+g_o)(v_x-v_o)=(g_m+g_o)v_o\n\\]\n\nso\n\n\\[\nv_o=\\frac{v_x}{2}.\n\\]\n\nThus each PMOS sees a source–gate change of\n\n\\[\nv_x-v_o=\\frac{v_x}{2},\n\\]\n\nand the small-signal current drawn from the supply by **one** inverter is\n\n\\[\ni_1=(g_m+g_o)\\frac{v_x}{2}.\n\\]\n\nWith three inverters in parallel, the total supply current is\n\n\\[\ni_x=3i_1=\\frac{3}{2}(g_m+g_o)v_x.\n\\]\n\nTherefore the small-signal resistance looking into the supply node is\n\n\\[\n\\boxed{R_x=\\frac{v_x}{i_x}=\\frac{2}{3\\,(g_m+g_o)}\n      =\\frac{2r_o}{3\\,(1+g_m r_o)}}\n\\]\n\nIf channel-length modulation is negligible \\((r_o\\to\\infty)\\),\n\n\\[\n\\boxed{R_x \\approx \\frac{2}{3g_m}}.\n\\]\n\nFor **unmatched** inverters, with \\(G_n=g_{mn}+g_{on}\\) and \\(G_p=g_{mp}+g_{op}\\), the result generalizes to\n\n\\[\n\\boxed{R_x=\\frac{G_n+G_p}{3\\,G_nG_p}}.\n\\]",
        "format": "markdown",
        "sha256": "8685e97024302f741c79234170c010ec247480448f1363bee0d4263b4ec5e1bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, the dominant mechanism. The golden solution explicitly assigns this kind of internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3435,
        "output_tokens": 15927,
        "total_tokens": 19362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3435,
        "output_tokens": 15927,
        "total_tokens": 19362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the small-signal resistance \\(R_X\\) looking into the common supply node, apply a small-signal test voltage \\(V_X\\) to that node and compute the current \\(I_X\\) that the ring draws:\n\n\\[\nR_X=\\frac{V_X}{I_X}.\n\\]\n\nAssume each inverter is a symmetric CMOS inverter with NMOS and PMOS transconductances\n\n\\[\ng_{mn}=g_{mp}=g_m\n\\]\n\nand output resistances\n\n\\[\nr_{on}=r_{op}=r_o .\n\\]\n\nBecause the three inverters are identical and biased at the metastable point, their outputs move together. Let the small-signal voltage at each inverter output be \\(V_o\\).\n\n### 1. Output voltage\n\nKCL at any inverter output gives\n\n\\[\n\\frac{V_o-V_X}{r_o}+\\frac{V_o}{r_o}+g_m V_o-g_m(V_X-V_o)=0.\n\\]\n\nSolving,\n\n\\[\nV_o=\\frac{V_X}{2}.\n\\]\n\nSo each inverter output follows the supply perturbation by one half.\n\n### 2. Current drawn from the supply node\n\nFor one inverter, the current leaving the supply node is the PMOS resistor current plus the PMOS transconductance current:\n\n\\[\nI_1=\\frac{V_X-V_o}{r_o}+g_m(V_X-V_o)\n   =\\frac{V_X}{2}\\left(g_m+\\frac{1}{r_o}\\right).\n\\]\n\nWith three identical inverters in parallel,\n\n\\[\nI_X=3I_1=\\frac{3V_X}{2}\\left(g_m+\\frac{1}{r_o}\\right).\n\\]\n\n### 3. Small-signal supply resistance\n\nTherefore,\n\n\\[\n\\boxed{R_X=\\frac{V_X}{I_X}\n      =\\frac{2}{3\\left(g_m+\\dfrac{1}{r_o}\\right)}}\n\\]\n\nFor \\(g_m r_o \\gg 1\\),\n\n\\[\n\\boxed{R_X \\approx \\frac{2}{3g_m}}.\n\\]\n\nFor a general \\(N\\)-stage ring oscillator with the same assumptions,\n\n\\[\n\\boxed{R_X=\\frac{2}{N\\left(g_m+\\dfrac{1}{r_o}\\right)}}.\n\\]\n\nIf your inverter model is different (e.g. a resistive-load inverter with load \\(R_D\\)), the expression changes accordingly; the result above is for the standard matched CMOS inverter model.",
        "format": "markdown",
        "sha256": "9f2eb09fe899338eb2a01cdcf1540d5c7fd9068e1c07a6c1301bdcd638f88fca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes a static, metastable inverter operating point and derives a gm-based resistance, missing the oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3429,
        "output_tokens": 15515,
        "total_tokens": 18944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3429,
        "output_tokens": 15515,
        "total_tokens": 18944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14999,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — the answer changes.\n\nThe expression  \n\n\\[\nR_X \\approx \\frac13\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\n\nis the **small‑signal resistance linearized around the static, unstable equilibrium** of the ring (the point where every inverter input/output sits near \\(V_{DD}/2\\)). In that linearized model, the ring feedback makes each transistor look roughly diode‑connected, so three inverters in parallel give the factor of \\(1/3\\).\n\nOnce the circuit actually oscillates, that fixed operating point no longer exists:\n\n* The transistors are switching through cutoff, saturation, and triode, so \\(g_{mn}\\) and \\(g_{mp}\\) are **time‑varying**, not constant.\n* “Small‑signal resistance” is no longer a single LTI number; the supply port is better described by a **time‑varying or averaged incremental impedance**.\n* The current drawn from the supply is governed by large‑signal dynamics — charging/discharging load capacitances at the oscillation frequency — so the slope \\(dI_{DD}/dV_{DD}\\) depends on delay, frequency, and the devices’ on‑resistances, not just the metastable‑point \\(g_m\\) values.\n\nSo the simple \\((1/3)(1/g_{mn}+1/g_{mp})\\) result is **not valid for the oscillating circuit**. To find the actual supply impedance, you must analyze the oscillator in its periodic steady state, or use a linear periodically time‑varying (LPTV) small‑signal analysis if you are interested in supply‑noise behavior.",
        "format": "markdown",
        "sha256": "c83e01f9e44f570ad1eb695bb52b756e264ad28101a17445946f82887540408c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging and discharging as the dynamic supply-current mechanism, but gives no scaling for RX and does not establish the key conclusion that its magnitude remains on the order of the MOS on-resistance rather than becoming much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 7026,
        "output_tokens": 22740,
        "total_tokens": 29766,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3513,
        "output_tokens": 11370,
        "total_tokens": 14883,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11019,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The answer does change in practice.\n\nThe expression  \n\n\\[\nR_X \\simeq \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\n\nwas obtained by assuming the ring sits at its (unstable) symmetric dc operating point, where every inverter input is approximately equal to its own output. In that state each MOSFET has its gate tied to its drain, so it behaves like a diode-connected device. Then one inverter gives roughly \\(1/g_{mn}+1/g_{mp}\\) from \\(V_{DD}\\) to ground, and three of them appear in parallel.\n\nBut if the circuit is actually oscillating, that assumption breaks down:\n\n* The gate of each transistor is driven by the **previous stage**, not by its own drain, so the devices are **not diode-connected**.\n* During the oscillation cycle the MOSFETs sweep through cutoff, triode/linear, and saturation, so \\(g_{mn}\\) and \\(g_{mp}\\) are **time-varying**, not constant.\n* The current drawn from the supply is pulsed and contains the oscillation frequency and its harmonics.\n\nSo the running oscillator no longer presents a simple, constant, positive resistance  \n\\(\\frac{1}{3}(1/g_{mn}+1/g_{mp})\\) to the supply node. Its effective small-signal impedance becomes a **periodically time-varying** (or frequency-dependent) quantity that can only be found by linearizing around the periodic steady state.\n\nIn short: \\(\\frac{1}{3}(1/g_{mn}+1/g_{mp})\\) is the small-signal value at the unstable bias point only. Once the ring really oscillates, the answer is different and requires a large-signal/periodic-steady-state analysis.",
        "format": "markdown",
        "sha256": "c584c462cfbc09187c748cc93c41564fb5849ad627f961adebb0e6402dc0cc02"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that the diode-connected DC model does not describe the oscillating ring, but it stops at saying periodic analysis is needed. It misses the dominant capacitive charging mechanism and the key conclusion that the effective resistance remains on the order of the MOS on-resistance, not much higher.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 7030,
        "output_tokens": 23682,
        "total_tokens": 30712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3515,
        "output_tokens": 11841,
        "total_tokens": 15356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes — the computed value no longer describes the node once the ring is actually oscillating.\n\nThe expression  \n\n\\[\nR_X \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)\n\\]\n\nis only a small-signal approximation at the **unstable dc equilibrium**: every inverter is sitting at its switching threshold, both transistors are in saturation, and (for a perfectly symmetric ring) all three node voltages are equal. In that special situation the NMOS and PMOS of each stage form a stack, and three such stacks are in parallel.\n\nBut when the circuit oscillates:\n\n1. **The operating point moves.** Transistors periodically enter cutoff and triode/linear region, so \\(g_{mn}\\) and \\(g_{mp}\\) vary from nearly zero to values much larger than their equilibrium value.\n2. **Gates are not tied to drains.** Each inverter’s gate is driven by the previous stage, so the “diode-connected” picture does not apply to the time-varying signal.\n3. **The supply current changes character.** It is no longer just a dc current through a saturated transistor stack; it includes capacitive charging/discharging current and crowbar current during transitions.\n\nSo the impedance looking into the supply node becomes **time-varying and frequency-dependent**. A single constant \\(R_X\\) given by the above formula is not meaningful for the running oscillator.\n\n*One subtlety:* if you ask only about the **linearized resistance right at the unstable equilibrium point**, that small-signal value does not “know” that it will later break into oscillation. But once the oscillator has amplitude, the assumptions behind the formula are violated and the actual impedance changes.",
        "format": "markdown",
        "sha256": "cae658dedd4152e659dc038cfc347b74c0e7b161f1d94cc506bcf718cf6ad1ab"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the static small-signal model does not describe the oscillating waveform and mentions capacitive current, but it does not relate that current to the average supply resistance or show that the resistance remains on the order of the MOS on-resistance. It therefore misses the central result.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 6912,
        "input_tokens": 7030,
        "output_tokens": 34428,
        "total_tokens": 41458,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 39610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3515,
        "output_tokens": 17214,
        "total_tokens": 20729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the width of \\(M_7\\) **decreases the initial voltage gain**.\n\nHere is why:\n\n* \\(M_7\\) is the tail current device. Making it wider increases the tail current \\(I_{\\text{tail}}\\) for a given clock high level.\n* During the early evaluation phase, before the cross-coupled devices \\(M_3/M_4\\) turn on, the input pair \\(M_1/M_2\\) produces a differential current \\(\\Delta I \\approx g_{m1,2}\\Delta V_{\\text{in}}\\).\n* Nodes \\(P\\) and \\(Q\\) must fall by roughly a threshold voltage before \\(M_3/M_4\\) turn on. That integration time is roughly\n\n\\[\nt \\propto \\frac{1}{I_{\\text{tail}}}\n\\]\n\n* So the initial differential voltage developed before regeneration is\n\n\\[\n\\Delta V_{PQ} \\approx \\frac{g_{m1,2}\\Delta V_{\\text{in}}}{C}\\,t\n\\propto \\frac{g_{m1,2}}{I_{\\text{tail}}}\\Delta V_{\\text{in}}\n\\]\n\nFor the input pair, \\(g_m \\propto \\sqrt{I_{\\text{tail}}}\\), so\n\n\\[\n\\frac{g_m}{I_{\\text{tail}}} \\propto \\frac{1}{\\sqrt{I_{\\text{tail}}}}\n\\]\n\nThus the initial gain falls as \\(I_{\\text{tail}}\\) rises:\n\n\\[\nA_{\\text{init}} \\propto \\frac{1}{\\sqrt{I_{\\text{tail}}}}\n\\]\n\nSo widening \\(M_7\\) makes the latch evaluate faster but **reduces the initial pre-regeneration voltage gain**.",
        "format": "markdown",
        "sha256": "598920e62a1308d0b635ab19d8490e049550da6c339048092aec21f2149fae92"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current and decreases initial gain, with a consistent integration-time and gm/Itail explanation.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4196,
        "output_tokens": 8987,
        "total_tokens": 13183,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8615,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4196,
        "output_tokens": 8987,
        "total_tokens": 13183,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8615,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the width of **M7** causes the **initial voltage gain to decrease**.\n\n**Why:**  \nM7 is the tail switch/current source for the input differential pair \\(M_1/M_2\\). Making \\(M_7\\) wider increases the tail current \\(I_{\\text{tail}}\\). Before the PMOS regenerative pair \\(M_5/M_6\\) turns on, the initial voltage gain is approximately\n\n\\[\nA_{v,\\text{init}} \\approx \\frac{g_{m1,2}}{I_{\\text{tail}}}\\times \\text{constant}\n\\]\n\nwhere \\(g_{m1,2}\\) is the transconductance of the input pair. Since\n\n\\[\ng_{m1,2} \\propto \\sqrt{I_{\\text{tail}}}\n\\]\n\nwe get\n\n\\[\nA_{v,\\text{init}} \\propto \\frac{1}{\\sqrt{I_{\\text{tail}}}}\n\\]\n\nA wider \\(M_7\\) gives a larger \\(I_{\\text{tail}}\\), so the output nodes discharge faster and the differential signal has less time to develop before regeneration begins. Although \\(g_{m1,2}\\) increases, it only grows as \\(\\sqrt{I_{\\text{tail}}}\\), so the net initial gain falls.\n\n**Qualitative result:** **Wider M7 → higher tail current → lower initial voltage gain.**",
        "format": "markdown",
        "sha256": "36b9a051be066def4edefc051db872b92fecb35f70baef6a449c69a764d6d53a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that increasing M7 width raises tail current and lowers initial gain, with a physically consistent gm/current explanation matching the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4188,
        "output_tokens": 7900,
        "total_tokens": 12088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4188,
        "output_tokens": 7900,
        "total_tokens": 12088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7606,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It decreases.**\n\nM7 is the clocked tail-current device for the input differential pair M1–M2. Making M7 wider increases the tail current \\(I_T\\).\n\nDuring the initial integrating phase of the comparator/sense‑amplifier:\n\n- The input pair transconductance rises only as  \n  \\[\n  g_{m1,2}\\propto \\sqrt{I_T}\n  \\]\n- But the integration window \\(t_{\\text{int}}\\) — the time before the regenerative cross‑coupled pair (M3–M6) turns on — shrinks roughly as  \n  \\[\n  t_{\\text{int}}\\propto \\frac{1}{I_T}\n  \\]\n\nSo the initial voltage gain developed before regeneration is approximately\n\n\\[\nA_{v,\\text{init}}\\approx \\frac{g_{m1,2}}{C}t_{\\text{int}}\n\\propto \\frac{\\sqrt{I_T}}{I_T}\n=\\frac{1}{\\sqrt{I_T}}\n\\]\n\nTherefore, widening M7 raises the tail current but **lowers the initial voltage gain**. It does make regeneration faster, but the pre‑regeneration voltage gain becomes smaller.",
        "format": "markdown",
        "sha256": "5f5ab9b929f80be5193cc97f803cdb0992ffd9b223bb9791874ca9b25a3af67a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M7 increases tail current and decreases initial gain. The explanation consistently shows that input-pair transconductance grows only as the square root of current while the integration interval shrinks with current, yielding a lower pre-regeneration gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4194,
        "output_tokens": 21074,
        "total_tokens": 25268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4194,
        "output_tokens": 21074,
        "total_tokens": 25268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this StrongARM clocked comparator, the **initial voltage gain decreases** if you increase the capacitance at nodes **P** and **Q**.\n\n**Why:** during the early part of the evaluation phase, transistors \\(M_3\\) and \\(M_4\\) are still off, and the input pair \\(M_1/M_2\\) delivers a differential current that charges/discharges the capacitances at \\(P\\) and \\(Q\\). The resulting differential voltage is approximately\n\n\\[\n\\Delta V_{PQ}(t)\\;\\approx\\;\\frac{g_{m1,2}}{C_P+C_Q}\\,\\Delta V_{\\text{in}}\\,t\n\\]\n\nso the initial gain is\n\n\\[\nA_{v,\\text{initial}}\\;\\approx\\;\\frac{g_{m1,2}\\,t}{C_P+C_Q}.\n\\]\n\nBecause the gain is **inversely proportional** to the capacitance at \\(P\\) and \\(Q\\), increasing \\(C_P\\) and \\(C_Q\\) makes those nodes move more slowly for the same input voltage. This:\n\n* reduces the initial voltage buildup,\n* delays the turn‑on of the regenerative pair \\(M_3/M_4\\),\n* and therefore increases the overall comparator delay.\n\nIn short: **larger capacitance at P and Q lowers the initial voltage gain and slows the circuit.**",
        "format": "markdown",
        "sha256": "b30d9b90027b206b7ac38e565ea16eb3b6d6083cf36508a28c49b6458e43f208"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the golden result: the initial gain remains approximately unchanged. The answer correctly notes that larger capacitance slows the node ramp and delays regeneration, but misses that this proportionally lengthens the amplification phase, canceling the capacitance dependence.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4189,
        "output_tokens": 11668,
        "total_tokens": 15857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4189,
        "output_tokens": 11668,
        "total_tokens": 15857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes **P** and **Q** **reduces the initial voltage gain**.\n\nThis circuit is a StrongARM latch. In the first (integrating) phase, the input differential pair \\(M_1/M_2\\) steers currents \\(I_1\\) and \\(I_2\\) onto the capacitors at nodes \\(P\\) and \\(Q\\). For a small differential input \\(\\Delta V_{in}\\),\n\n\\[\n\\Delta V_{PQ}(t) \\approx \\frac{(I_1-I_2)\\,t}{C_{P,Q}}\n\\approx \\frac{g_{m1,2}\\,\\Delta V_{in}}{C_{P,Q}}\\,t\n\\]\n\nso the initial voltage gain is roughly\n\n\\[\nA_{v,\\text{init}} \\approx \\frac{g_{m1,2}\\,t}{C_{P,Q}} .\n\\]\n\nBecause the gain is inversely proportional to the capacitance at \\(P\\) and \\(Q\\), making those capacitors larger makes nodes \\(P\\) and \\(Q\\) discharge more slowly and produces a smaller differential voltage for a given input and time. Thus the initial gain **decreases**.",
        "format": "markdown",
        "sha256": "0c770a92196a3cbf3b41d0c8c294dfac5d34cd7c76ad44d60eebc048a439a032"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the essential result: the initial gain remains approximately unchanged because the longer amplification interval cancels the reduced voltage slope caused by larger capacitance. The answer describes the fixed-time slope but misses that cancellation.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4195,
        "output_tokens": 8498,
        "total_tokens": 12693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4195,
        "output_tokens": 8498,
        "total_tokens": 12693,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes **P** and **Q** **reduces the initial voltage gain**.\n\nDuring the initial evaluation phase, the input pair \\(M_1/M_2\\) discharges \\(P\\) and \\(Q\\), so the initial signal developed there is roughly\n\n\\[\n\\Delta V_{PQ} \\approx \\frac{g_{m1,2}\\,t}{C_{P,Q}}\\,\\Delta V_{in}\n\\]\n\nThus the initial gain is inversely proportional to the capacitance at \\(P\\) and \\(Q\\). A larger capacitance slows the voltage change at those nodes, so a smaller differential voltage is produced for a given input and time, and less signal is passed to the regenerative/output nodes \\(X/Y\\). As a result, the initial voltage gain decreases and the comparator/latch becomes slower.",
        "format": "markdown",
        "sha256": "d19d979dd243e221f900914890c6ceb00e118669de5e29d5f0596d91eb6d0018"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion. Although larger capacitance reduces the voltage slope at a fixed time, it also lengthens the amplification phase proportionally, so the capacitance cancels from the initial gain; the main effect is a slower transient.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4197,
        "output_tokens": 8478,
        "total_tokens": 12675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4197,
        "output_tokens": 8478,
        "total_tokens": 12675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this comparator, **increasing the widths of M5 and M6 tends to degrade the speed.**\n\nWhy: M5 and M6 are cross-coupled PMOS devices whose drains are connected to the output nodes **X** and **Y**, and whose gates are driven by the opposite output. Making them wider increases their parasitic capacitances—drain-to-bulk, gate-to-drain, and gate-to-source capacitance—which directly add load to the regeneration nodes X and Y.\n\nDuring evaluation, the NMOS latch (M3/M4) and input pair (M1/M2) must develop the output voltage difference across this larger capacitance. Although a wider M5/M6 gives slightly more PMOS feedback transconductance, the extra self-loading usually dominates, so the regeneration time constant increases and the comparator becomes slower.\n\nSo, for this topology, simply increasing W₅ and W₆ generally **slows down** the latch rather than speeding it up.",
        "format": "markdown",
        "sha256": "16ed5e8e1bc716a7af5e1d5f77710f0d71dcfad235aa7a098b4ba94dc7facd0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the cross-coupled PMOS devices and a real capacitance-related limit, but it gets the key trend wrong: widening M5/M6 initially strengthens regeneration and improves speed; added capacitance limits the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4144,
        "input_tokens": 4195,
        "output_tokens": 6472,
        "total_tokens": 10667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6268,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4144,
        "input_tokens": 4195,
        "output_tokens": 6472,
        "total_tokens": 10667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6268,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The PMOS transistors **M₅ and M₆ are the upper cross‑coupled latch pair**. Increasing their widths has two competing effects:\n\n1. **Positive effect:** Wider M₅/M₆ have higher transconductance (\\(g_m\\)) and pull‑up current, which strengthens the regenerative feedback and helps the output nodes snap to valid logic levels faster.\n\n2. **Negative effect:** They also add parasitic capacitance at nodes **X** and **Y** (drain diffusion plus gate capacitance seen by the opposite node), which slows the initial discharge/regeneration.\n\n**Bottom line:** A **moderate increase** in the widths of M₅ and M₆ usually **improves speed** because the gain/transconductance benefit dominates. However, if they are made **too wide**, the added capacitance becomes the dominant factor and the speed **degrades**. So there is an optimum width; simply oversizing M₅ and M₆ does not necessarily keep making the comparator faster.",
        "format": "markdown",
        "sha256": "be7052047700aea5854df5d7feb953e71face59185e968d440adf367d6b26370"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening M5/M6 initially improves speed by strengthening regeneration, while added parasitic capacitance eventually limits the benefit and creates an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4195,
        "output_tokens": 5414,
        "total_tokens": 9609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4195,
        "output_tokens": 5414,
        "total_tokens": 9609,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5352,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In this latch‑type comparator, **increasing the widths of M5 and M6 generally degrades the speed** (or at best gives diminishing returns).\n\n**Why:** M5 and M6 are PMOS transistors that are **initially off** when the clock goes high, because nodes X and Y have just been precharged to VDD (so \\(|V_{GS}| = 0\\) for both PMOS devices). Until one of the outputs, say X, falls by about \\(|V_{THP}|\\), M6 does not turn on and cannot help pull Y up.\n\nDuring this initial phase the wider PMOS devices contribute mainly **extra parasitic capacitance** at the output nodes:\n\n- drain‑bulk capacitance,\n- gate‑drain Miller capacitance,\n- gate capacitance loading the opposite output.\n\nThat extra capacitance must be discharged by the input differential pair and the NMOS cross‑coupled devices, so the initial differential voltage develops more slowly and the overall delay increases.\n\nOnce the PMOS devices do turn on, a larger width gives stronger positive feedback, but the added capacitance usually outweighs that benefit unless M5/M6 were already very weak. So simply making M5 and M6 wider does **not** improve speed; it typically makes the comparator slower.",
        "format": "markdown",
        "sha256": "43f8563cf24847e97d196c2fd6d3966d7e8203e64087eee85be9cfd5a60a8bca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the PMOS devices and a real eventual capacitance penalty, but concludes that widening generally degrades speed. The key result is the opposite: stronger regeneration dominates initially, with capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4195,
        "output_tokens": 8924,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4195,
        "output_tokens": 8924,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed degrades.**\n\nIn this circuit the transistors driven by `CK` and `\\(\\overline{CK}\\)` are basically **switches** in series with the logic/input devices (`M1`). Making them wider gives two main penalties:\n\n1. **Larger clock load** – the gates of the `CK`/`CKbar` transistors add capacitance to the clock net. A heavier clock load slows the clock edges, so the switches turn on later and the clock-to-output delay increases.\n2. **Larger internal-node capacitance** – widening those transistors also raises the drain/source capacitance on the dynamic nodes `X` and `Y`, increasing the RC time constant when those nodes switch.\n\nOnce the clocked switches are wide enough that their own resistance is no longer the dominant delay term, further widening provides almost no resistance benefit while the added capacitance keeps growing. The result is a lower maximum operating frequency.\n\nSo the clocked transistors should be kept relatively small (just large enough to pass the required current), and any speed-up effort is better spent on the logic transistors (`M1`) and the output inverter.",
        "format": "markdown",
        "sha256": "f6b883c00aeba42a9fa9f50f8597cd255a0733070c2f1263b4da3a86a1900b9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that wider clocked devices add node capacitance and lower their on-resistance, but concludes that speed degrades overall. The key trend is that speed initially improves as resistance falls, with added capacitance limiting or reversing the benefit at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2212,
        "output_tokens": 9578,
        "total_tokens": 11790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2212,
        "output_tokens": 9578,
        "total_tokens": 11790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the **clocked transistors** (the ones gated by \\(CK\\) and \\(\\overline{CK}\\)) generally **improves speed**, at least up to a point.\n\nThese transistors act as switches in series with the input devices in the master and slave C²MOS stages. Widening them lowers their on‑resistance, so the internal nodes \\(X\\) and \\(Y\\) are charged and discharged more quickly, reducing the propagation delay and clock‑to‑\\(Q\\) delay.\n\nHowever, making them too wide also increases:\n- the capacitive load on the clock network, and  \n- the diffusion capacitance at nodes \\(X\\) and \\(Y\\).\n\nSo the speed improves initially, but if the clocked transistors are over‑sized, the added capacitance can eventually dominate and degrade overall performance. In short: **moderately increasing their widths improves speed; excessive sizing can hurt it.**",
        "format": "markdown",
        "sha256": "bd05014135ebe77ed8100b69571dc8fe54119561d5076ddc88a0305fb45ec615"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially improves speed by lowering the clocked transistors’ on-resistance, while added capacitance at the latch nodes can eventually limit or reverse the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2212,
        "output_tokens": 6550,
        "total_tokens": 8762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2212,
        "output_tokens": 6550,
        "total_tokens": 8762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the CK/CKbar “clocked” transistors is generally **more likely to degrade** the overall speed, unless the clock driver is made proportionally stronger.\n\nWhy:\n\n* **Wider clocked switches do lower their own on‑resistance**, which helps nodes \\(X\\) and \\(Y\\) charge/discharge faster when the clock is active.\n* **However, those same transistors present gate capacitance to the clock lines \\(CK\\) and \\(\\overline{CK}\\).** Widening them directly increases the capacitive load on the clock.\n* In this dynamic master–slave/divider circuit, timing is controlled by the clock edges. If the clock driver is fixed, the added capacitance slows the clock transitions, shrinking the valid evaluation window and reducing the maximum operating frequency.\n* They also add extra diffusion capacitance at the dynamic nodes \\(X\\) and \\(Y\\).\n\nSo the net effect is usually a **speed degradation** due to heavier clock loading. The clocked transistors should be sized to a balance point: wide enough to conduct well, but not so wide that they overload the clock.",
        "format": "markdown",
        "sha256": "6259a5a9028cac6dd5e95a22ad55cc799d8fb6b245bc487172e0d1c73213022a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that wider clocked transistors reduce on-resistance, but concludes that speed generally degrades. The golden solution requires recognizing that widening initially improves speed; the added capacitance eventually limits or reverses that benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2212,
        "output_tokens": 8764,
        "total_tokens": 10976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2212,
        "output_tokens": 8764,
        "total_tokens": 10976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9586,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The circuit is a **master–slave toggle flip-flop**, i.e. a divide-by-2 circuit, and it can produce **quadrature outputs**.\n\nHere is why:\n\n- The left half is a clocked inverter that is transparent when **CK is high**. It sets  \n  \\[\n  X = \\overline{Z}\n  \\]\n  so \\(X\\) changes on the rising edge of \\(CK\\).\n\n- The right half is a clocked inverter that is transparent when **CK is low**. It sets  \n  \\[\n  Y = \\overline{X},\\qquad Z = \\overline{Y}\n  \\]\n  so \\(Z\\) changes on the falling edge of \\(CK\\).\n\nBecause the two halves sample on opposite clock phases, the output waveforms \\(X\\) and \\(Z\\) toggle at half the clock frequency, but their transitions are separated by **half a clock period**. Since the output period is two clock periods, that delay is:\n\n\\[\n\\frac{T_{CK}}{2} = \\frac{T_{out}}{4} = 90^\\circ\n\\]\n\nSo **\\(X\\) and \\(Z\\) are in quadrature** at the divided frequency \\(f_{CK}/2\\).\n\nA few points to keep in mind:\n\n- Quadrature accuracy depends on a **50% duty-cycle clock** and good matching between the two halves.\n- \\(Y\\) is the complement of \\(Z\\) (180°), not quadrature. With an extra inverter on \\(X\\), you can get all four 0°, 90°, 180°, and 270° phases.\n- The actual phase relationship includes small delays from the inverter and switches, but ideally the structure generates quadrature outputs.",
        "format": "markdown",
        "sha256": "7d38af169d508fcb63d36e0dbf722d4986d8de71399bd8d8a7f7d4c24c404e0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and the half-clock-period timing. It mentions inverter delays and matching, but does not clearly explain both the Inv3-induced skew of Z and the unequal loading of the two latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2195,
        "output_tokens": 10314,
        "total_tokens": 12509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2195,
        "output_tokens": 10314,
        "total_tokens": 12509,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** The structure does **not** provide quadrature outputs.\n\nHere is why:\n\n- The left branch is active/evaluates when \\(CK\\) is high, so its output is essentially  \n  \\[\n  X=\\overline{Y}\n  \\]\n- The right branch is active/evaluates when \\(CK\\) is low, so its output is essentially  \n  \\[\n  Y=\\overline{X}\n  \\]\n\nThus \\(X\\) and \\(Y\\) are always logical complements:\n\n\\[\nX=\\overline{Y}\n\\]\n\nThey are therefore **differential** outputs — separated by \\(180^\\circ\\) — not \\(90^\\circ\\) quadrature signals.\n\nThe inverter gives\n\n\\[\nZ=\\overline{Y}=X\n\\]\n\nso \\(Z\\) is in phase with \\(X\\), again not in quadrature.\n\nIn short, the circuit behaves as a clocked latch/comparator producing complementary phases only; it does not generate the \\(90^\\circ\\) phase-shifted (I/Q) outputs required for quadrature.",
        "format": "markdown",
        "sha256": "fe676592d4895f207a7cb9c64765d0ab0dc6c9969d4a3f3db45174618383bed6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the divide-by-two operation and incorrectly treats the latch outputs as always complementary, concluding that Z is in phase with X. The circuit provides nominal quadrature; the stated topology and phase reasoning are fundamentally wrong.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2195,
        "output_tokens": 14546,
        "total_tokens": 16741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2195,
        "output_tokens": 14546,
        "total_tokens": 16741,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** As drawn, the circuit does **not** provide quadrature outputs.\n\nWhy:\n\n* The two sides are switched by complementary clocks, \\(CK\\) and \\(\\overline{CK}\\). Those clocks are \\(180^\\circ\\) apart, not \\(90^\\circ\\).\n* Nodes \\(X\\) and \\(Y\\) are tied together, so they are effectively the same internal node, not two independent \\(90^\\circ\\)-phased signals.\n* The inverter gives simply\n\n\\[\nZ = \\overline{Y}\n\\]\n\nso \\(Z\\) and \\(Y\\) are complements — \\(180^\\circ\\) out of phase — not quadrature (\\(90^\\circ\\)).\n\nThus the structure behaves as a clocked latch/comparator or switched inverter cell. It produces one logical output and its complement, but it has no mechanism to generate the \\(90^\\circ\\) phase relationship required for quadrature outputs. True quadrature would require either two coupled stages, a polyphase network, or a dedicated quadrature-generation scheme.",
        "format": "markdown",
        "sha256": "4aa96162ca8f37954eea1722c7b19b65c0643f751aec24f9b8d35fd53ff642dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: X and Y are outputs of separate latches, not tied together. Their opposite clock phases make the divide-by-two latch outputs nominally quadrature; the inverter complements Y but does not establish that it is 180° from X. The conclusion and reasoning therefore miss the central behavior.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 10335,
        "total_tokens": 12532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2197,
        "output_tokens": 10335,
        "total_tokens": 12532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Looking at this circuit — a clocked regenerative latch/sense amplifier with cross-coupled inverters — increasing the widths of the clocked transistors generally **improves speed**, but only up to a point.\n\n**Why speed improves:**\n- The clocked transistors act as switches in series with the power supply of the inverters.\n- Wider transistors have lower ON resistance, so they can supply more current to charge/discharge the internal nodes.\n- This reduces the regeneration/evaluation time of the latch, giving a faster clock-to-output response.\n\n**The caveat:**\n- Wider clocked transistors also mean **more capacitance**: larger gate capacitance loads the clock, and larger drain capacitance adds to the internal node capacitance.\n- If the clocked transistors are made **too** wide, the extra capacitance eventually dominates and speed can degrade.\n\nSo the short answer is: **speed improves initially, but there is an optimum width beyond which further increases hurt performance.**",
        "format": "markdown",
        "sha256": "4f4d5d42e1be6acabae7b59bd142f021f60aec2bf3c5f4e1bb15173b532096b2"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening the clocked devices improves speed initially because their on-resistance falls. However, it omits the key charge-sharing effect and instead asserts a generic capacitance-driven optimum; the golden solution reserves full credit for recognizing charge sharing as the limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4550,
        "output_tokens": 25988,
        "total_tokens": 30538,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 12994,
        "total_tokens": 15269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12781,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In most cases, **the speed degrades**.\n\nThe transistors labeled \\(CK\\) and \\(\\overline{CK}\\) are clocked switches in series with the pull‑up/pull‑down paths. Making them wider does lower their on‑resistance, but the dominant effect is the **extra capacitive loading they add**:\n\n* **Larger clock load:** Their gates are driven by the clock network, so wider devices mean larger \\(C_{gs}\\) loading on \\(CK\\) and \\(\\overline{CK}\\). This slows the clock edges and increases clock buffer delay.\n* **More internal node capacitance:** Their source/drain diffusions add parasitic capacitance at the internal nodes between the clocked switches and the inverter transistors, increasing the RC time for each latch stage.\n\nSo, unless the clocked transistors were grossly under‑sized to begin with, increasing their width makes the overall flip‑flop slower and less power‑efficient. There is an optimum width; going beyond it degrades speed.",
        "format": "markdown",
        "sha256": "cdfab79eeb304ca29d2155fa0db1a8d202cbd69cb5b016529ff0a40cc8794f7c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: widening the clocked devices improves speed because their lower resistance outweighs their limited loading of the data path. It also treats added capacitance as dominant rather than noting charge sharing as an acceptable limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4550,
        "output_tokens": 7742,
        "total_tokens": 12292,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7312,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 3871,
        "total_tokens": 6146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **C²MOS (clocked‑CMOS) master–slave flip‑flop**. The “clocked transistors” are the four switches that connect the cross‑coupled inverter pairs to **VDD** and **GND** under the control of \\(CK\\) and \\(\\overline{CK}\\).\n\n**Short answer:** Increasing their widths **improves speed up to a point**.\n\nWhy:\n\n* A wider transistor has a **lower ON‑resistance**:\n  \\[\n  R_{\\text{on}} \\propto \\frac{1}{W}\n  \\]\n  Lower resistance means the clocked inverters can charge/discharge the internal latch nodes faster, reducing setup time and clock‑to‑\\(Q\\) delay.\n\n* However, wider clocked transistors also add **more gate capacitance** to the clock lines and **more diffusion capacitance** at the internal nodes. This increases clock load and power consumption.\n\n* If the clocked transistors are made **too wide**, the extra capacitive loading can slow the clock edges enough that the speed gain from lower resistance is lost, and performance may degrade.\n\nSo the practical result is: **moderately increasing the widths improves speed, but there is an optimum width; beyond that, speed degrades due to excessive clock and node capacitance.**",
        "format": "markdown",
        "sha256": "7856e6434e381e087e60698a47c34d549fe12057aac7c24d916cbf07378ab4ae"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening improves speed initially because it lowers on-resistance, but omits the key charge-sharing effect that degrades swing and limits the improvement.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4546,
        "output_tokens": 10600,
        "total_tokens": 15146,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2273,
        "output_tokens": 5300,
        "total_tokens": 7573,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5023,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "# Circuit Analysis\n\n## What the Circuit Is\nThis is a **master–slave toggle flip-flop / divide-by-2 frequency divider** implemented with switches (transmission gates) and inverters. It uses two non-overlapping clock phases, **CK** and **$\\overline{CK}$**.\n\n---\n\n## Key Observations\n\n### 1. Topology\n- **Master stage:** Switch CK + inverter **Inv₁**\n- **Slave stage:** Switch $\\overline{CK}$ + two inverters\n- **Feedback:** The final output **G** is fed back to the input node **A** before the CK switch.\n\nAround the entire loop there are **three inverters** (an odd number). When the loop is fully closed, this gives an effective inversion of **1**, which causes the output to toggle.\n\n### 2. Operation by Phase\n\nAssume the initial output is $G = G_{old}$. Because of the feedback wire, node **A** is also $G_{old}$.\n\n| Phase | CK switch | $\\overline{CK}$ switch | What happens |\n|-------|-----------|------------------------|--------------|\n| **CK high** | Closed | Open | Node $B = A = G_{old}$. Then $C = \\overline{B} = \\overline{G_{old}}$. The slave holds the previous output. |\n| **$\\overline{CK}$ high** | Open | Closed | Node $E = C = \\overline{G_{old}}$. The two inverters buffer it: $G_{new} = E = \\overline{G_{old}}$. The master holds $C$. |\n\nSo after one full clock cycle:\n\n$$G_{new} = \\overline{G_{old}}$$\n\nThe output **toggles once per input clock period**.\n\n---\n\n## Functional Result\n\nSince the output toggles every clock cycle:\n\n$$\\boxed{f_{out} = \\frac{f_{CK}}{2}}$$\n\nThis circuit acts as a **frequency divider by 2**. Cascading multiple such stages gives divide-by-4, divide-by-8, etc., which is the basis of **binary counters**.\n\n---\n\n## Critical Design Requirement: Non-Overlapping Clocks\n\nThis circuit **must** use non-overlapping CK and $\\overline{CK}$. If both switches close simultaneously, the loop contains 3 inverters with a closed electrical path — a **3-stage ring oscillator**. The circuit would then oscillate uncontrollably rather than toggling cleanly.\n\nThus:\n- ✅ **CK and $\\overline{CK}$ non-overlapping** → reliable divide-by-2\n- ❌ **CK and $\\overline{CK}$ overlapping** → race condition / oscillation\n\nIn practical CMOS design, these switches are usually implemented as transmission gates driven by a non-overlapping clock generator.",
        "format": "markdown",
        "sha256": "6b694c8ac09d84a97ec7dd8c89b594485e324d10ef4e224c5c78f334c3629c0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a master–slave divider that toggles once per input period, producing an output at half the clock frequency. The switch-controlled stages and their hold behavior describe dynamic-latch operation; the extra clock-overlap discussion is not essential to the answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 6518,
        "total_tokens": 7944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1426,
        "output_tokens": 6518,
        "total_tokens": 7944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The figure is a **three-inverter ring with two switches** in the feedback path.\n\nIf we label the nodes as:\n\n- **A** = input of the first inverter (`Inv₁`)\n- **B** = output of `Inv₁`\n- **C** = input of the second inverter\n- **D** = output of the second inverter\n- **E** = output of the third inverter (fed back to the left side)\n\nthen the logic relations are:\n\n\\[\nB=\\overline{A},\\qquad D=\\overline{C},\\qquad E=\\overline{D}\n\\]\n\nThe switches mean:\n\n- The **CK** switch connects/disconnects the feedback point **E** to node **A**.\n- The **CK̄** switch connects/disconnects node **B** to node **C**.\n\nAssuming the switches close when their control line is high:\n\n| CK | CK̄ | Which switch is closed | Effect |\n|---|---|---|---|\n| 1 | 0 | CK closed | E is connected to A; B is disconnected from C |\n| 0 | 1 | CK̄ closed | B is connected to C; E is disconnected from A |\n| 1 | 1 | both closed | full ring of three inverters |\n| 0 | 0 | both open | ring broken at two places |\n\n### 1. As a ring oscillator\n\nA ring oscillator needs an **odd number of inversions around a closed loop**. Here there are three inverters, so the topology can oscillate **only when both switches are closed**. In that case the loop is:\n\n\\[\nA \\rightarrow B \\rightarrow C \\rightarrow D \\rightarrow E \\rightarrow A\n\\]\n\nThere is no stable logic state because a signal returns to the start inverted after three gate delays. The expected oscillation period is roughly:\n\n\\[\nT \\approx 6\\,t_{pd}\n\\]\n\nwhere \\(t_{pd}\\) is the propagation delay of one inverter.\n\n### 2. With CK and CK̄ as true complementary clocks\n\nBecause the labels are complements, **one switch is always open** while the other is closed (ignoring tiny non-overlap gaps). Therefore the ring is never fully closed, so **the circuit does not behave as a self-sustaining static oscillator**. The inversion chain is simply broken every half cycle.\n\n### 3. Dynamic interpretation\n\nIf the floating gates store charge when a switch is open (i.e., dynamic CMOS behavior), the two switches can act like a two-phase master/slave sampling network. In that case the circuit can shift and invert a stored value each half-clock cycle, functioning as a **dynamic latch or toggle-like stage** rather than a continuous oscillator.\n\n### Bottom line\n\nThe arrangement is a **gated three-stage ring oscillator**. It oscillates only if **both switches are closed** at the same time. With true complementary `CK` and `CK̄` controls, the loop is always broken, so it cannot oscillate as a standard static ring oscillator.",
        "format": "markdown",
        "sha256": "dca96560159d0d190aa0f1f533a044b6400d2ad271b8c47bb36d0a2e901b2701"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes a possible two-phase dynamic sampling/latch or toggle-like operation, but mainly mischaracterizes the circuit as a gated ring oscillator and never identifies its intended divide-by-two function. The dynamic-latch observation earns partial credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 5973,
        "total_tokens": 7401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 5973,
        "total_tokens": 7401,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **three-stage ring oscillator with two series switches** in the loop.\n\n### 1. What the blocks are\n- The triangle symbols with bubbles are **inverters**.\n- The small contacts labeled \\(CK\\) and \\(\\overline{CK}\\) are **switches** (or transmission gates) that are turned on/off by a clock and its complement.\n\nWhen both switches are **closed**, the three inverters are connected head-to-tail in a single feedback loop.\n\n---\n\n### 2. Why it can oscillate\nFor a feedback loop to oscillate it needs:\n\n\\[\n\\text{loop gain} \\ge 1 \\quad \\text{and} \\quad \\text{total phase shift} = 0^\\circ \\pmod{360^\\circ}\n\\]\n\n- Each inverter gives a **logic inversion** (\\(180^\\circ\\) phase shift) and gain \\(> 1\\).\n- With **three inverters**, the DC phase shift is:\n\n\\[\n3 \\times 180^\\circ = 540^\\circ \\equiv 180^\\circ \\pmod{360^\\circ}\n\\]\n\nThis means the feedback signal is returned in the “wrong” polarity, so there is no stable DC state. The circuit therefore toggles continuously.\n\n- An even number of inversions would give \\(0^\\circ\\) net phase shift and would **not** oscillate.\n\n---\n\n### 3. Oscillation frequency\nIf each inverter has a propagation delay \\(t_{pd}\\), the signal must travel **twice around the loop** to return to the same logic level.\n\n\\[\nT \\approx 2 \\times 3\\,t_{pd} = 6\\,t_{pd}\n\\]\n\nSo the approximate oscillation frequency is:\n\n\\[\nf \\approx \\frac{1}{6\\,t_{pd}}\n\\]\n\n---\n\n### 4. Role of the switches\n- **Both switches closed:** the loop is complete and the circuit oscillates.\n- **Either switch open:** the loop is broken and oscillation stops. Any charge stored on the floating capacitive nodes will leak away over time.\n- If \\(CK\\) and \\(\\overline{CK}\\) are truly **complementary non-overlapping clocks**, only one switch is on at a time, so the loop is always open and the circuit **cannot oscillate continuously**. It then behaves as a gated/sampled ring rather than a free-running oscillator.\n\n---\n\n### 5. Practical points\n- Switch on-resistance and parasitic capacitance add extra delay, lowering the frequency.\n- Process, voltage, and temperature variations change \\(t_{pd}\\), so the frequency is not precise.\n- The waveform at any inverter node is roughly a square wave with period \\(6t_{pd}\\) and ideally 50% duty cycle if the inverters are matched.\n\n**In short:** the arrangement is a switch-gated three-stage ring oscillator; when enabled, it produces a square-wave clock whose period is about six inverter delays.",
        "format": "markdown",
        "sha256": "2930f29a19a3833a013166c24919b6f9e4662e4e7a3a79509d7a82406075a6a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a dynamic-latch divide-by-two, not a switch-gated ring oscillator. The answer misidentifies the topology and misses the half-frequency operation.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 3969,
        "total_tokens": 5397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1428,
        "output_tokens": 3969,
        "total_tokens": 5397,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3353,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter, **Inv₁**, is connected in **parallel with the first black inverter**: both have the same input node (the `CK` side) and both drive the same output node (the `CK̄` side). In other words, it adds an extra inversion path around the first stage of the ring oscillator.\n\nIts main effects on performance are:\n\n| Effect | Explanation |\n|--------|-------------|\n| **Higher drive strength at the first stage** | Because two inverters now drive the `CK̄` node, the effective output resistance of stage 1 is lower. This makes the `CK → CK̄` transition faster. |\n| **Increased oscillation frequency** | A ring oscillator’s frequency is roughly inversely proportional to the total loop delay. Speeding up stage 1 raises the oscillation frequency, though the exact amount depends on how much Inv₁ delays the other stages by loading them. |\n| **Extra capacitive loading** | Inv₁ adds gate and diffusion capacitance to the `CK` and `CK̄` nodes. If Inv₁ is too small, this loading can dominate and actually **reduce** frequency instead of increasing it. |\n| **Higher power consumption** | Another inverter switches every cycle, so dynamic power increases. There may also be a brief “fight” current if the two inverters switch at slightly different thresholds. |\n| **More device noise / jitter** | Inv₁ contributes its own thermal and flicker noise. However, because it makes the `CK̄` edge steeper, timing jitter can sometimes improve despite the extra noise source. |\n| **Waveform asymmetry** | If Inv₁ has a different size or switching threshold than the first black inverter, the rising and falling edges at `CK̄` can become unbalanced, distorting the duty cycle. |\n| **Loop-gain / startup benefit** | The extra inverter adds gain around the loop, which can help guarantee reliable oscillator startup. |\n\n### Bottom line\nInv₁ is essentially a **“helper” inverter** that makes the first inversion stage stronger. It tends to **increase oscillation frequency and improve edge steepness**, but at the cost of **higher power, larger area, and more capacitive loading**. To get a net performance benefit, Inv₁ should be sized so that its drive-strength improvement outweighs the extra capacitance it introduces.",
        "format": "markdown",
        "sha256": "3282ff05e39bd94c06c43c330194a77a376df4437f4f726aebb03f8c334f9360"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a parallel driver in a ring oscillator rather than an unclocked feedforward path bypassing the first latch. It also misses the key low-frequency drawback: the branch can overpower the main path and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1229,
        "output_tokens": 3720,
        "total_tokens": 4949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3227,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1229,
        "output_tokens": 3720,
        "total_tokens": 4949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3227,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter, **Inv₁**, is wired **in parallel** with the first black inverter stage (the one controlled by the CK switch). Both inverters have the same input and both drive the same output node, so it does not change the logical inversion around the loop—the ring still has an odd number of inversions and can oscillate.\n\nWhat it mainly does is **increase the drive strength of that stage**. The consequences are:\n\n1. **Higher oscillation frequency / shorter period**  \n   Because two inverters are now pulling the node up and down instead of one, the effective propagation delay of that stage is reduced. The ring oscillator therefore runs faster. How much faster depends on the relative size of the red inverter: a small one has only a small effect, while a large one can dominate that stage.\n\n2. **More power and area**  \n   The extra inverter adds capacitance, dynamic switching power, and short-circuit current, and it takes up more silicon area.\n\n3. **Possible waveform/duty-cycle changes**  \n   If the red inverter has different PMOS/NMOS sizing or threshold voltages than the black inverter, the rise and fall times at that node can become asymmetric, altering the duty cycle and possibly adding jitter.\n\nIn short: **the red inverter speeds up the oscillator by making the first stage “stronger,” at the cost of extra power and area.** If the switches are instead used to select between the red path and the black path, then Inv₁ simply provides an alternative delay path, and the frequency difference between the two settings measures its delay contribution.",
        "format": "markdown",
        "sha256": "2688aa8e80e96e6ededeebceb92f15ed3151240560ed5669f4c406810acc2bcc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes a possible speed benefit, but misidentifies the red inverter as a parallel driver rather than an unclocked feedforward path that bypasses the CK switch and Inv₁. It also misses the key low-frequency drawback: the branch can corrupt division and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1229,
        "output_tokens": 7616,
        "total_tokens": 8845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7289,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1229,
        "output_tokens": 7616,
        "total_tokens": 8845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7289,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter **Inv₁** is wired in **parallel** with the CK‑switched first inverter: its input is tied to the **CK** node and its output is tied to the **\\(\\overline{CK}\\)** node. Because it is in parallel, it does **not** add another series inversion stage, so it does not change the ring from “odd number of inverters” to “even.”\n\nIts main effects on performance are:\n\n| Effect | What it means |\n|--------|----------------|\n| **More drive on the first stage** | When CK is closed, Inv₁ drives the \\(\\overline{CK}\\) node together with the black inverter. The larger effective drive lowers the first stage’s delay, which tends to **raise the oscillation frequency** and sharpen transitions. |\n| **Extra capacitive loading** | Inv₁ adds capacitance at both the CK and \\(\\overline{CK}\\) nodes. That extra load partly offsets the speed benefit and **increases dynamic power consumption**. |\n| **Alternate oscillation path** | When CK is open, the black first inverter is disconnected, but Inv₁ still provides the CK → \\(\\overline{CK}\\) inversion. So the ring can still oscillate (using Inv₁ + the two right‑hand inverters) as long as the \\(\\overline{CK}\\) switch is closed. Without the red inverter, opening CK would break the loop. |\n| **Possible contention/asymmetry** | If Inv₁ has a very different threshold voltage or size than the black inverter, the two parallel paths can fight or one can dominate, altering the waveform shape, duty cycle, and noise behavior. In PUF/sensor applications, this intentional mismatch is often the source of the frequency offset that forms the response. |\n\nIn short: **Inv₁ gives the loop an always‑available inversion path and extra drive, generally increasing frequency and robustness at the cost of higher capacitance and power.**",
        "format": "markdown",
        "sha256": "02e042209c00d0622c58f5c9fda5e02aea3269c8f9a28dbd4183f657493a2cf5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the red inverter can provide a faster alternate path, but misstates its connection as parallel with the first inverter and treats the unclocked path as beneficial. It misses the key low-frequency failure mechanism: the branch can toggle on its own and raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1229,
        "output_tokens": 13786,
        "total_tokens": 15015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1229,
        "output_tokens": 13786,
        "total_tokens": 15015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13380,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree with that answer.**\n\nThe red inverter is **not** acting as a leakage “keeper” and it is **not** forming a cross-coupled latch with `Inv1`.\n\n### Why the “keeper/latch” description is wrong\n\nA keeper in dynamic logic is a **weak** inverter that feeds back from the **output of a stage to its own dynamic/floating input node** to hold a stored logic level against leakage. A cross-coupled latch is a positive-feedback loop with an **even** number of inversions (typically two inverters connected back-to-back).\n\nIn this figure:\n\n- The red inverter’s input is the node **before** the `CK` switch.\n- Its output is tied to the **output** of `Inv1` (the node after `Inv1`).\n- So the red inverter is in **parallel** with the `CK`‑switched `Inv1` path, not cross-coupled with it.\n\nA true cross-coupled pair would have `Inv1` output → red inverter input and red inverter output → `Inv1` input. That is not what is drawn.\n\n### Actual role of the red inverter\n\nThe red inverter is an **extra inversion path** that keeps the overall feedback loop “odd-inverting.”\n\nIf you count the loop containing the red inverter:\n\n- Red inverter: 1 inversion\n- The two black inverters on the right: 2 inversions  \n- **Total: 3 inversions (odd)**\n\nAn odd number of inversions around a closed loop is the condition for a **ring oscillator / toggle operation**. When the `CK` switch opens and disconnects `Inv1`, the red inverter still provides the necessary inversion from the left node to the right node, so the ring can keep oscillating (or toggling, if this is being used as a clock divider).\n\nSo the red inverter is a **sustaining/feedback inverter in the ring**, not a weak leakage keeper. It is part of the signal path, and it determines the inversion count and therefore the oscillatory behavior of the loop. It does **not** remove a minimum-clock-frequency/leakage requirement; in fact, the circuit remains dynamic.",
        "format": "markdown",
        "sha256": "dec51fc6ae5f4e66ecda32450bed43eb5b54d01b70feffb72164106b3f499f14"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper/cross-coupled-latch interpretation and identifies the red inverter’s connections, but mischaracterizes its main role as a sustaining feedback inverter. It misses the feedforward bypass’s high-speed benefit and the low-frequency failure that raises the minimum usable clock rate.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1272,
        "output_tokens": 9977,
        "total_tokens": 11249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1272,
        "output_tokens": 9977,
        "total_tokens": 11249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9519,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Partially.** The conclusion is right, but the explanation is not quite accurate.\n\nThe red inverter is indeed a **keeper** (a weak feedback inverter), and adding it does remove the minimum clock-frequency requirement caused by leakage. However, it is **not** correctly described as “forming a cross-coupled latch with `Inv1`.”\n\nIn this circuit, when the `CK` switch opens, the node at the input of `Inv1` is left floating. Without the red inverter, leakage currents would eventually corrupt that stored value, so the circuit would need a minimum clock frequency to refresh it.\n\nThe red inverter senses the **buffered output** \\(Q\\) (after the two right-hand inverters) and **weakly drives the floating node back to its stored level**:\n\n\\[\nQ = \\overline{X},\\qquad \\text{red inverter output} = \\overline{Q} = X\n\\]\n\nwhere \\(X\\) is the dynamic node at the input of `Inv1`. Thus the red inverter reinforces \\(X\\), keeping the state intact even when the clock stops.\n\nBecause the keeper is intentionally much weaker than the forward path, it does **not** fight `Inv1` when `CK` is closed and new data arrives. It only supplies enough current to counteract leakage when `CK` is open.\n\n**Actual role:** the red inverter is a **weak keeper / feedback inverter** that makes the dynamic node pseudo-static, eliminating the minimum clock-frequency requirement. It is not a symmetric cross-coupled latch pair with `Inv1`; rather, it closes a weak regenerative feedback loop around the latch.",
        "format": "markdown",
        "sha256": "a62ee1da9fb1b93839c3d0bec039862f59fa2136bfc7897f7b9bacf62c6586da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper and invents feedback from the buffered output to the dynamic node. In fact it is an unclocked feedforward branch that bypasses the CK switch and Inv1; it can speed high-rate operation but can corrupt division at low rates, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1272,
        "output_tokens": 12770,
        "total_tokens": 14042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1272,
        "output_tokens": 12770,
        "total_tokens": 14042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "I **partially agree**, but the statement is incomplete and somewhat misleading.\n\n### What the red inverter actually does\n\nThe red inverter is indeed a **keeper** (or weak feedback keeper). Its input senses the output of `Inv1`, and its output drives back to the input of `Inv1`. Together, `Inv1` and the red inverter form a **positive-feedback loop** (two inverters connected input-to-output), so topologically they look like a cross-coupled inverter pair.\n\nWhen the `CK` switch is **open**, the node at the input of `Inv1` would otherwise be floating and holding its value only on parasitic capacitance. The red inverter fights leakage by regeneratively pulling that node back to its stored value. So far, the description is correct.\n\n### Why the answer is not fully right\n\nThe conclusion that this “removes the minimum clock frequency requirement due to leakage” is **too strong**. There are two main issues:\n\n1. **Other nodes are still dynamic.**  \n   In the figure, the node between the `\\(\\overline{CK}\\)` switch and the second inverter is also isolated when `\\(\\overline{CK}\\)` is open (i.e., when `CK` is high). That node has **no keeper**, so it can still leak away if the clock stops or runs too slowly. Because of this, the overall circuit still has a leakage-related minimum clock frequency or refresh requirement.\n\n2. **It is a keeper, not a full static latch.**  \n   Although `Inv1` + red inverter form a two-inverter feedback loop, the red inverter is intentionally **weak**. It must be weak so that when `CK` closes again, the driving side can overpower the keeper and update the stored value. A true static cross-coupled latch would not normally be designed to be overpowered by a passing switch.\n\n### Bottom line\n\nThe red inverter’s actual role is to act as a **weak keeper / feedback keeper** for the dynamic node at the input of `Inv1`, reducing leakage loss when the `CK` switch is open. It does **not**, by itself, eliminate the minimum clock frequency requirement for the whole dynamic shift-register loop.",
        "format": "markdown",
        "sha256": "6bd5617970ce57eb7afe29c4ba9bf1db6f2b28f85528ea9ac70b3c1d636286f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a cross-coupled keeper. It is actually an unclocked feedforward branch that bypasses part of the latch path; at low clock rates it can overpower the intended behavior and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1272,
        "output_tokens": 6109,
        "total_tokens": 7381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1272,
        "output_tokens": 6109,
        "total_tokens": 7381,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **shunt–shunt resistive-feedback inverter LNA**:  \n\\(M_1\\) is the NMOS common-source device and \\(M_2\\) is a PMOS active load.  \n\\(R_F\\) feeds the output drain node back to the input gate node, and that feedback sets the input resistance \\(R_{in}\\).\n\n---\n\n### 1.  What sets \\(R_{in}=50\\;\\Omega\\)?\n\nAt low frequency the input resistance looking into the gate is approximately\n\n\\[\nR_{in}\\;\\approx\\;\\frac{R_F+R_o}{1+G_m R_o}\n\\]\n\nwhere\n\n\\[\nG_m \\approx g_{m1}+g_{m2}, \\qquad\nR_o \\approx r_{o1}\\parallel r_{o2}.\n\\]\n\nIf the open-loop gain \\(|A_{v0}|=G_mR_o\\) is large and \\(R_o\\gg R_F\\), this simplifies to the familiar Miller form\n\n\\[\nR_{in}\\;\\approx\\;\\frac{R_F}{1+|A_{v0}|}\n      \\;=\\;\\frac{R_F}{1+G_mR_o}.\n\\]\n\nFor a fixed \\(R_{in}=50\\;\\Omega\\),\n\n\\[\n\\boxed{R_F \\;\\approx\\; 50\\,\\Omega\\;(1+G_mR_o)}\n\\]\n\nSo \\(R_F\\) and the stage gain are not independent: **a larger \\(R_F\\) is allowed only if the gain is made larger.**\n\n---\n\n### 2.  Where does the noise come from?\n\nThe main noise contributors are:\n\n1. **Thermal noise of the source resistor** \\(R_S=50\\;\\Omega\\) — this sets the NF floor.\n2. **Thermal noise of the feedback resistor** \\(R_F\\) — proportional to \\(1/R_F\\).\n3. **Channel thermal noise of \\(M_1\\) and \\(M_2\\)** — proportional to their transconductances.\n\nAn approximate NF expression for this type of stage is\n\n\\[\nNF \\;\\approx\\; 1+\\frac{R_S}{R_F}\n      +\\frac{4\\gamma}{G_m R_S}\\left(1+\\frac{R_S}{R_F}\\right)^2\n      +\\text{load-noise terms}.\n\\]\n\nBecause \\(R_S/R_F\\) appears explicitly, **making \\(R_F\\) larger directly lowers the NF**. But from the matching condition above, raising \\(R_F\\) while keeping \\(R_{in}=50\\;\\Omega\\) requires raising \\(G_mR_o\\).\n\n---\n\n### 3.  How to optimize NF with \\(R_{in}=50\\;\\Omega\\)\n\nThe optimization strategy is therefore:\n\n1. **Maximize the open-loop gain \\(G_mR_o\\) within the allowed power/linearity/bandwidth budget.**  \n   - Increase the bias current and/or device widths of \\(M_1\\) and \\(M_2\\) to raise \\(G_m\\).  \n   - Keep the devices in saturation and use enough channel length to maintain a high \\(R_o\\).\n\n2. **Use the largest \\(R_F\\) that still gives \\(R_{in}=50\\;\\Omega\\).**  \n   From the matching equation, the larger \\(G_mR_o\\) is, the larger \\(R_F\\) can be, and the smaller its noise contribution becomes.\n\n3. **Check that the PMOS load \\(M_2\\) does not dominate the noise.**  \n   An active load is quieter than a resistor load, but it still adds channel noise. In many designs \\(g_{m2}\\) is chosen smaller than \\(g_{m1}\\) so that the NMOS device provides most of the gain.\n\nIn short, the NF is minimized by **increasing the stage gain and scaling \\(R_F\\) upward accordingly**, because that reduces both the feedback-resistor noise and the input-referred transistor noise while preserving the 50‑Ω input match.\n\n---\n\n### 4.  Practical design steps\n\n1. Pick a bias current and device sizes that give the highest practical \\(G_mR_o\\) for your power budget.\n2. Compute the open-loop gain:\n   \\[\n   |A_{v0}| \\approx (g_{m1}+g_{m2})(r_{o1}\\parallel r_{o2}).\n   \\]\n3. Set\n   \\[\n   R_F \\approx 50\\,\\Omega\\,(1+|A_{v0}|).\n   \\]\n4. Simulate NF, \\(S_{11}\\), gain, and \\(IIP_3\\).  \n   Iterate on bias and device sizing, because increasing current eventually reduces \\(r_o\\) and raises power, so a real optimum is set by the design constraints, not by NF alone.\n\nSo the key idea is: **do not make \\(R_F\\) small to force a match; instead raise the gain so that a large, low-noise \\(R_F\\) can give the required 50‑Ω input resistance.**",
        "format": "markdown",
        "sha256": "b4d9b003793cb800dccde0b139adf21ef594db0d324697e4016731c44f2b3270"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the finite-output-resistance input-match relation and recommends raising transconductance while increasing RF to preserve the 50-ohm match, allowing lower NF. Its approximations are imperfect, but the central optimization is correct.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2676,
        "output_tokens": 14320,
        "total_tokens": 16996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2676,
        "output_tokens": 14320,
        "total_tokens": 16996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13277,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **resistive‑feedback inverter‑type LNA**: \\(M_1\\) and \\(M_2\\) form a complementary common‑source stage, and \\(R_F\\) feeds the output back to the input to set the input resistance.\n\n### 1.  Input‑resistance constraint\n\nBecause of Miller multiplication of \\(R_F\\),\n\n\\[\nR_{\\text{in}}\\;\\approx\\;\\frac{R_F}{1+|A_v|}\n\\]\n\nwhere\n\n\\[\n|A_v|\\;\\approx\\;(g_{m1}+g_{m2})\\,R_{\\text{out}}\n\\]\n\nand \\(R_{\\text{out}}\\) is the total resistance seen at the output node\n(e.g. \\(r_{o1}\\|r_{o2}\\|R_L\\)).\n\nIf \\(R_{\\text{in}}\\) must stay \\(50\\;\\Omega\\), then \\(R_F\\) and the gain are tied:\n\n\\[\n\\boxed{R_F \\;=\\; 50\\,\\Omega\\;(1+|A_v|)}\n\\]\n\nSo you cannot simply raise \\(R_F\\) to reduce its noise – doing so would raise \\(R_{\\text{in}}\\). You must raise \\(|A_v|\\) along with \\(R_F\\).\n\n### 2.  Approximate noise factor\n\nA useful approximation for the noise factor of this topology is\n\n\\[\nF \\;\\approx\\; 1 \\;+\\; \\frac{R_s}{R_F}\n   \\;+\\; \\frac{\\gamma_1 g_{m1}+\\gamma_2 g_{m2}}\n              {(g_{m1}+g_{m2})^2 R_s}\n        \\left(1+\\frac{R_s}{R_F}\\right)^2\n\\]\n\nwhere \\(R_s=50\\;\\Omega\\) and \\(\\gamma_{1,2}\\) are the MOS channel‑noise coefficients.\n\nWith \\(R_F = R_s(1+|A_v|)\\),\n\n\\[\n\\frac{R_s}{R_F}=\\frac{1}{1+|A_v|}\n\\]\n\nso **both the \\(R_F\\) noise term and the transistor channel‑noise term decrease as \\(|A_v|\\) is increased.**\n\n### 3.  How to optimize NF with \\(R_{\\text{in}}=50\\;\\Omega\\)\n\n1. **Maximize the open‑loop voltage gain \\(|A_v|\\).**  \n   - Increase \\(g_{m1}+g_{m2}\\) by using larger \\(W/L\\) and/or higher bias current.  \n   - Increase the output resistance \\(R_{\\text{out}}\\) (longer channel, cascoding if allowed, lighter output loading).\n\n2. **Choose \\(R_F\\) from the matching equation.**  \n   Once the maximum practical gain is set, make \\(R_F\\) as large as the matching constraint allows:\n   \\[\n   R_F = 50\\,(1+|A_v|)\\;\\Omega\n   \\]\n   A larger \\(R_F\\) means smaller thermal‑noise current \\(4kT/R_F\\).\n\n3. **Keep the devices in a low‑noise operating region.**  \n   Avoid deep subthreshold or heavy velocity saturation, where \\(\\gamma\\) is large. Moderate inversion usually gives the best trade‑off between \\(g_m\\) and noise.\n\n4. **Verify with simulation.**  \n   Sweep \\(R_F\\) and transistor size/bias while enforcing \\(R_{\\text{in}}=50\\;\\Omega\\), and stop at the point where power, linearity (IIP3), bandwidth, or headroom become limiting.\n\nIn short: **for a fixed \\(50\\;\\Omega\\) input match, optimize NF by maximizing the voltage gain so that the feedback resistor can be made as large as possible.**",
        "format": "markdown",
        "sha256": "7fdfbe21d40d00fcd594e6f08f4be50348b736eb382f8dfd52d1eb718d71a5b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It gives the correct practical direction—raise gm and retune RF to preserve the 50 Ω match, reducing channel-noise contribution. But its matching relation omits the finite-ro term in Rin, and it does not clearly explain that this permits gm to exceed 1/Rs and NF to fall below 1+gamma; treating gain increases via gm and Rout as interchangeable obscures the key mechanism.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2670,
        "output_tokens": 17257,
        "total_tokens": 19927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16473,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2670,
        "output_tokens": 17257,
        "total_tokens": 19927,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16473,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **CMOS inverter common‑source stage with shunt resistive feedback** through \\(R_F\\).  \nTo optimize its noise figure while keeping the input resistance at 50 Ω, use the fact that \\(R_{in}\\) and \\(R_F\\) are not independent.\n\n### 1. Input resistance relationship\nFor this topology the input resistance is set approximately by Miller feedback:\n\n\\[\nR_{in}\\approx \\frac{R_F}{1+|A_v|}\n\\]\n\nwhere \\(A_v\\) is the voltage gain from the input gate to the output drain.  \nBecause \\(R_{in}=50\\;\\Omega\\),\n\n\\[\nR_F = 50\\;\\Omega\\,(1+|A_v|)\n\\]\n\nSo, if you raise the gain, you can and must make \\(R_F\\) proportionally larger.\n\n### 2. Main noise contributors\nThe dominant added noise sources are:\n\n1. **Thermal noise of the feedback resistor**, with current density \\(4kT/R_F\\).  \n   Under the 50 Ω match, its contribution to the noise factor scales roughly as\n\n   \\[\n   F_{R_F}\\propto \\frac{R_S}{R_F}\\approx \\frac{1}{1+|A_v|}\n   \\]\n\n   Hence a larger \\(R_F\\) (allowed by a larger \\(|A_v|\\)) reduces the feedback‑resistor noise.\n\n2. **MOSFET channel noise**, referred to the input approximately as\n\n   \\[\n   v_{n,in}^2 \\approx \\frac{4kT\\gamma}{g_{m1}+g_{m2}}\n   \\]\n\n   Its contribution to the noise factor is roughly\n\n   \\[\n   F_{MOS}\\propto \\frac{\\gamma}{(g_{m1}+g_{m2})R_S}\n   \\]\n\n   So increasing the total transconductance \\(G_m=g_{m1}+g_{m2}\\) lowers transistor noise.\n\n### 3. Therefore: how to optimize NF at fixed \\(R_{in}=50\\;\\Omega\\)\n\n- **Maximize the voltage gain \\(A_v\\).**  \n  A larger \\(A_v\\) lets \\(R_F\\) be larger, which directly reduces the feedback‑resistor thermal noise, while still maintaining \\(R_{in}=50\\;\\Omega\\).\n\n- **Increase the total transconductance** \\(G_m=g_{m1}+g_{m2}\\).  \n  Use higher bias current and/or wider devices (lower overdrive) for \\(M_1\\) and \\(M_2\\) to raise \\(g_m\\) and lower channel‑noise contribution. This also raises \\(A_v\\).\n\n- **Increase the output resistance** \\(r_{o,eff}=r_{o1}||r_{o2}||R_L\\).  \n  Since \\(A_v\\approx G_m r_{o,eff}\\), use longer channels, cascodes, or a lighter load to boost gain without adding resistor noise.\n\n- **After any gain/transconductance change, re‑adjust \\(R_F\\)** so that\n\n  \\[\n  R_F = 50\\;\\Omega\\,(1+|A_v|)\n  \\]\n\n  remains satisfied.\n\n### 4. Approximate NF expression\nFor a 50 Ω source and a well‑matched input, a simplified noise factor is\n\n\\[\nF \\approx 1 + \\frac{\\gamma}{(g_{m1}+g_{m2})R_S}\n          + \\frac{1}{1+|A_v|}\n\\]\n\nso NF improves as both \\(G_m\\) and \\(|A_v|\\) increase.\n\n### 5. Trade‑offs\nHigher gain and larger transconductance help NF, but cost power, reduce bandwidth (due to larger capacitance and Miller effect), and may degrade linearity/output swing. In practice, you choose the largest \\(A_v\\) and \\(G_m\\) that still meet the bandwidth, power, and linearity specifications, then set \\(R_F\\) from the \\(R_{in}=50\\;\\Omega\\) condition.\n\n**Key takeaway:** at fixed \\(R_{in}\\), do not simply reduce \\(R_F\\). Instead, **increase the gain/transconductance so that \\(R_F\\) can be made large**, thereby minimizing the feedback resistor’s thermal‑noise contribution while keeping the input match.",
        "format": "markdown",
        "sha256": "342138120e8de4c9b4d6aa502ef4a68cf866b1155b2208b65feeb6ee63af6c3f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly recommends increasing total transconductance and intrinsic gain while retuning RF to preserve the 50 Ω match, giving the right noise trends and allowing NF below 1 + γ. The gain-based match and NF expressions are approximate, but are consistent with the finite-output-resistance, high-gain optimization.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2678,
        "output_tokens": 18222,
        "total_tokens": 20900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17316,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2678,
        "output_tokens": 18222,
        "total_tokens": 20900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17316,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the usual long-channel small-signal model and neglecting channel-length modulation and body effect \\((\\lambda=\\gamma=0)\\), the input impedance is the impedance seen by the current source at node \\(P\\):\n\n\\[\n\\boxed{%\nZ_{\\text{in}}(s)=\n\\left[\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}\\left(\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}}\\right]\n\\;\\Big\\|\\;\n\\frac{1}{sC_{\\text{in}}}\n}\n\\]\n\nor, equivalently,\n\n\\[\nZ_{\\text{in}}(s)=\\frac{1}\n{\\,sC_{\\text{in}}+\n\\dfrac{1+g_{m1}R_{D1}\\left(\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}}\n{R_F+R_{D2}}\\,}.\n\\]\n\nAt low frequency the resistive part is\n\n\\[\n\\boxed{%\nR_{\\text{in}}=\n\\frac{R_F+R_{D2}}\n{1+g_{m1}R_{D1}\\left(\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}}\n}\n\\]\n\nand if \\(R_F\\gg R_{D2}\\),\n\n\\[\nR_{\\text{in}}\\approx\n\\frac{R_F}\n{1+g_{m1}R_{D1}\\left(\\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\right)R_{D2}}.\n\\]\n\n---\n\n### Derivation sketch\n\n1. **M2–M3 pair.** With ideal tail current source \\(I_{SS}\\), the common source node of \\(M_2,M_3\\) is an AC open. Writing KCL at that source node gives\n\n\\[\ng_{m2}(v_s-v_x)+g_{m3}v_s=0\n\\quad\\Rightarrow\\quad\nv_s=\\frac{g_{m2}}{g_{m2}+g_{m3}}v_x.\n\\]\n\nHence the small-signal current delivered by \\(M_3\\) is\n\n\\[\ni_{d3}=g_{m3}v_s\n=G_m v_x,\n\\qquad\nG_m=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\n\n2. **First stage.** For \\(M_1\\),\n\n\\[\nv_x=-g_{m1}R_{D1}v_p.\n\\]\n\n3. **Output node.** Including the loading of \\(R_F\\),\n\n\\[\nG_m v_x=\\frac{v_o}{R_{D2}}+\\frac{v_o-v_p}{R_F},\n\\]\n\nwhich gives the loaded gain from \\(P\\) to \\(V_{\\text{out}}\\).\n\n4. **Input node.** KCL at \\(P\\) yields\n\n\\[\nI_{\\text{in}}=sC_{\\text{in}}v_p+\\frac{v_p-v_o}{R_F}.\n\\]\n\nSolving these equations gives the expression above.\n\nIf channel-length modulation is included, replace \\(R_{D1}\\to R_{D1}\\parallel r_{o1}\\) and \\(R_{D2}\\to R_{D2}\\parallel r_{o3}\\).",
        "format": "markdown",
        "sha256": "93dd77fc576bb9a08d4213bafede61d2be34d03a4e103cdd5ea70d1fcf5a707c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, including the output-side resistance: (RF + RD2)/(1 + A0). Its effective transconductance reduces to gm2,3/2 for a matched M2–M3 pair, so the gain term matches the golden solution. The added capacitance discussion is ancillary.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 220,
        "output_tokens": 28557,
        "total_tokens": 28777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 220,
        "output_tokens": 28557,
        "total_tokens": 28777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The input impedance is the impedance seen by the current source, i.e.\n\n\\[\nZ_{\\text{in}}(s)=\\frac{V_P(s)}{I_{\\text{in}}(s)} .\n\\]\n\nUse a small-signal model: gate currents are zero, \\(V_{DD}\\) and \\(V_b\\) are ac grounds, and the current source \\(I_{SS}\\) is ideal for the compact result. Let\n\n\\[\nG_x=\\frac{1}{R_x},\\qquad \nG_M=\\frac{g_{m1}g_{m2}}{g_{m2}+G_{D1}} .\n\\]\n\nThe relevant small-signal nodes are \\(P\\), \\(X\\), \\(Y\\), and \\(V_{\\text{out}}\\).\n\n---\n\n### 1. Voltage gain from \\(P\\) to \\(V_{\\text{out}}\\)\n\nNeglecting transistor output resistances \\(r_o\\) and the output resistance of \\(I_{SS}\\):\n\n\\[\n\\begin{aligned}\n(g_{m2}+G_{D1})V_X &= -g_{m1}V_P,\\\\[2mm]\ng_{m3}V_Y &= g_{m2}V_X,\\\\[2mm]\n(G_{D2}+G_F)V_{\\text{out}} &= G_F V_P + g_{m3}V_Y .\n\\end{aligned}\n\\]\n\nSolving these gives\n\n\\[\nA_v \\equiv \\frac{V_{\\text{out}}}{V_P}\n=\n\\frac{G_F-G_M}{G_{D2}+G_F}\n=\n\\frac{R_{D2}}{R_{D2}+R_F}\n-\nG_M\\,(R_{D2}\\parallel R_F).\n\\]\n\n---\n\n### 2. Input admittance\n\nAt node \\(P\\),\n\n\\[\nI_{\\text{in}}\n=\nV_P\\left(G_{\\text{in}}+sC_{\\text{in}}\\right)\n+\n\\frac{V_P-V_{\\text{out}}}{R_F}.\n\\]\n\nTherefore\n\n\\[\nY_{\\text{in}}(s)\n=\n\\frac{I_{\\text{in}}}{V_P}\n=\nG_{\\text{in}}+sC_{\\text{in}}+\\frac{1-A_v}{R_F}.\n\\]\n\n---\n\n### 3. Input impedance\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)\n=\n\\frac{1}{\n\\dfrac{1}{R_{\\text{in}}}+sC_{\\text{in}}\n+\\dfrac{1-A_v}{R_F}\n}\n}\n\\]\n\nSubstituting \\(A_v\\) gives the explicit form\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)\n=\n\\left[\n\\frac{1}{R_{\\text{in}}}+sC_{\\text{in}}\n+\\frac{1}{R_{D2}+R_F}\n+\n\\frac{g_{m1}g_{m2}}{g_{m2}+\\dfrac{1}{R_{D1}}}\n\\frac{R_{D2}}{R_{D2}+R_F}\n\\right]^{-1}\n}.\n\\]\n\nThe input therefore looks like \\(R_{\\text{in}}\\) in parallel with \\(C_{\\text{in}}\\) and the Miller-reflected feedback resistor \\(R_F/(1-A_v)\\).\n\n---\n\n### Useful limits\n\n- **DC** \\((s\\to 0)\\):\n\n\\[\nR_{\\text{in,DC}}\n=\n\\left[\n\\frac{1}{R_{\\text{in}}}\n+\\frac{1}{R_{D2}+R_F}\n+\n\\frac{g_{m1}g_{m2}}{g_{m2}+1/R_{D1}}\n\\frac{R_{D2}}{R_{D2}+R_F}\n\\right]^{-1}.\n\\]\n\n- If \\(R_{D1}\\gg 1/g_{m2}\\) and \\(R_{D2}\\gg R_F\\),\n\n\\[\nZ_{\\text{in}}(0)\\approx R_{\\text{in}}\\parallel \\frac{1}{g_{m1}}.\n\\]\n\n- **High frequency** \\((s\\to\\infty)\\): \\(C_{\\text{in}}\\) dominates, so \\(Z_{\\text{in}}\\approx 1/(sC_{\\text{in}})\\).\n\n---\n\n### Note on finite output resistances\n\nIf \\(r_{o1},r_{o2},r_{o3}\\) and the output resistance of \\(I_{SS}\\) cannot be neglected, solve the full nodal system\n\n\\[\n\\begin{pmatrix}\nG_{D1}+g_{o1}+g_{m2}+g_{o2} & -g_{o2} & 0\\\\[2mm]\n-g_{m2}-g_{o2} & g_{o2}+g_{m3}+g_{o3}+G_{ISS} & -g_{o3}\\\\[2mm]\n0 & -g_{m3}-g_{o3} & G_{D2}+g_{o3}+G_F\n\\end{pmatrix}\n\\begin{pmatrix}V_X\\\\ V_Y\\\\ V_{\\text{out}}\\end{pmatrix}\n=\n\\begin{pmatrix}-g_{m1}V_P\\\\ 0\\\\ G_F V_P\\end{pmatrix},\n\\]\n\nobtain \\(A_v=V_{\\text{out}}/V_P\\), and again use\n\n\\[\nZ_{\\text{in}}(s)=\\left[G_{\\text{in}}+sC_{\\text{in}}+G_F(1-A_v)\\right]^{-1}.\n\\]\n\nBody effect can be absorbed by replacing \\(g_{m2}\\) and \\(g_{m3}\\) with \\(g_m+g_{mb}\\).",
        "format": "markdown",
        "sha256": "d3e537b197d14e658683d925f8994c667d7ec3fe0030814692be4876f7f9d05a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly uses the general Miller feedback relation and accounts for the output-side resistance through an RF+RD2-type term. However, its derived amplifier gain does not match the circuit’s unloaded gain A0 = ½ gm1 gm2,3 RD1 RD2, so the resulting input impedance is wrong; the added Rin and Cin are not part of the required result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 220,
        "output_tokens": 32734,
        "total_tokens": 32954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 220,
        "output_tokens": 32734,
        "total_tokens": 32954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming a low-frequency small-signal model with **channel-length modulation neglected** \\((\\lambda=0)\\), **body effect neglected** \\((\\gamma=0)\\), and **gate current negligible**, the input resistance at node \\(P\\) is\n\n\\[\n\\boxed{R_{\\text{in}}=\\frac{R_F+R_{D2}}{1+g_{m1}g_{m2}R_{D1}R_{D2}}}\n\\]\n\nand, if the input capacitance \\(C_{\\text{in}}\\) is included, the input impedance is\n\n\\[\n\\boxed{Z_{\\text{in}}(s)=\\frac{R_{\\text{in}}}{1+sR_{\\text{in}}C_{\\text{in}}}\n      =R_{\\text{in}}\\;\\Big\\|\\;\\frac{1}{sC_{\\text{in}}}}\n\\]\n\n---\n\n### Derivation\n\n1. **Voltage at \\(X\\)**  \n   \\(M_1\\) is a common-source stage with load \\(R_{D1}\\):\n\n   \\[\n   V_X=-g_{m1}R_{D1}V_P\n   \\]\n\n2. **Current conveyed to the output**  \n   \\(M_2\\) converts \\(V_X\\) to a current. The common-gate transistor \\(M_3\\) passes that current to the output node (because \\(\\lambda=0\\), the current is not attenuated by \\(M_3\\)):\n\n   \\[\n   I_{\\text{out}}=g_{m2}V_X\n   \\]\n\n3. **KCL at \\(V_{\\text{out}}\\)**\n\n   \\[\n   g_{m2}V_X+\\frac{V_P-V_{\\text{out}}}{R_F}-\\frac{V_{\\text{out}}}{R_{D2}}=0\n   \\]\n\n   Substituting \\(V_X=-g_{m1}R_{D1}V_P\\),\n\n   \\[\n   V_{\\text{out}}\\!\\left(\\frac{1}{R_F}+\\frac{1}{R_{D2}}\\right)\n   =V_P\\!\\left(\\frac{1}{R_F}-g_{m1}g_{m2}R_{D1}\\right)\n   \\]\n\n   Hence the voltage gain from \\(P\\) to the output is\n\n   \\[\n   A_v=\\frac{V_{\\text{out}}}{V_P}\n       =\\frac{\\dfrac{1}{R_F}-g_{m1}g_{m2}R_{D1}}\n              {\\dfrac{1}{R_F}+\\dfrac{1}{R_{D2}}}\n   \\]\n\n4. **Input resistance**  \n   The gate of \\(M_1\\) draws no DC current, so the input current flows only through \\(R_F\\):\n\n   \\[\n   I_{\\text{in}}=\\frac{V_P-V_{\\text{out}}}{R_F}\n                =\\frac{V_P(1-A_v)}{R_F}\n   \\]\n\n   Therefore\n\n   \\[\n   R_{\\text{in}}=\\frac{V_P}{I_{\\text{in}}}\n                =\\frac{R_F}{1-A_v}\n                =\\frac{R_F+R_{D2}}{1+g_{m1}g_{m2}R_{D1}R_{D2}}}\n   \\]\n\n5. **Including \\(C_{\\text{in}}\\)**  \n   If a capacitor \\(C_{\\text{in}}\\) shunts the input node,\n\n   \\[\n   Z_{\\text{in}}(s)=R_{\\text{in}}\\;\\Big\\|\\;\\frac{1}{sC_{\\text{in}}}\n   \\]\n\n   giving the expression above.\n\n---\n\n### Notes\n\n* If body effect of \\(M_3\\) is not negligible, replace \\(g_{m2}\\) in the product term by  \n  \\(\\displaystyle g_{m2}\\frac{g_{m3}}{g_{m3}+g_{mb3}}\\).\n* If \\(r_{o1}\\) is included, replace \\(R_{D1}\\) by \\(R_{D1}\\parallel r_{o1}\\).\n* The result is the resistance seen by the current source at node \\(P\\). If the diagram’s \\(R_{\\text{in}}\\) and \\(C_{\\text{in}}\\) represent source parasitics, then the total impedance seen by \\(I_{\\text{in}}\\) is that source impedance in parallel with the amplifier input impedance derived above.",
        "format": "markdown",
        "sha256": "826e2afe881d7d778df5d8822dd18d11a4cc76684bbe219ae2ede0b2a0798503"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gets the Miller-feedback structure and the numerator RF + RD2 right, but uses the wrong unloaded gain: the required loop-gain term is (1/2)gm1 gm2,3 RD1 RD2. Omitting the factor of 1/2 and the effective gm2,3 gives a materially incorrect input resistance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 220,
        "output_tokens": 25097,
        "total_tokens": 25317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 220,
        "output_tokens": 25097,
        "total_tokens": 25317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the phase noise that the LDO’s thermal noise produces at the VCO output, treat the noisy LDO voltage as a **supply‑noise FM/PM perturbation** on the oscillator. The key parameter is the VCO’s **supply pushing coefficient**.\n\n---\n\n### 1. Define the LDO output noise\n\nLet the LDO output voltage noise be \\(v_n(t)\\) with power spectral density  \n\n\\[\nS_{v_n}(f)=S_{\\text{th}}(f)\\quad [\\text{V}^2/\\text{Hz}]\n\\]\n\nIf \\(S_{\\text{th}}\\) is instead the raw noise of an internal LDO device, convert it to output voltage noise through the LDO output impedance / PSRR:\n\n\\[\nS_{v_n}(f)=S_{\\text{th}}(f)\\,|Z_{\\text{out,LDO}}(f)|^2\n\\]\n\nor include the input‑supply rejection:\n\n\\[\nS_{v_n}(f)=\\frac{S_{V_{DD}}(f)}{\\text{PSRR}^2(f)}+S_{\\text{th,LDO}}(f)\n\\]\n\n---\n\n### 2. VCO supply pushing coefficient\n\nThe VCO frequency depends on its supply \\(V_{\\text{out}}\\). Define the supply pushing coefficient:\n\n\\[\nK_{VDD}=\\frac{\\partial f_0}{\\partial V_{\\text{out}}}\\quad [\\text{Hz/V}]\n\\]\n\nor, in angular frequency,\n\n\\[\nK_\\omega=\\frac{\\partial \\omega_0}{\\partial V_{\\text{out}}}=2\\pi K_{VDD}\\quad [\\text{rad/(s·V)}]\n\\]\n\nYou obtain \\(K_{VDD}\\) by simulating/measureing the oscillator while stepping \\(V_{\\text{out}}\\) slightly and recording the frequency shift.\n\n---\n\n### 3. Frequency noise caused by LDO noise\n\nA small supply noise voltage produces a frequency deviation:\n\n\\[\n\\Delta f(t)=K_{VDD}\\,v_n(t)\n\\]\n\nSo the PSD of frequency fluctuations is\n\n\\[\nS_{\\Delta f}(f)=K_{VDD}^2\\,S_{v_n}(f)\n\\]\n\n---\n\n### 4. Convert frequency noise to phase noise\n\nPhase is the integral of frequency:\n\n\\[\n\\phi(t)=2\\pi\\int \\Delta f(t)\\,dt\n\\]\n\nIn the frequency domain, integration gives a \\(1/f^2\\) factor:\n\n\\[\nS_\\phi(f)=\\frac{S_{\\Delta f}(f)}{f^2}\n      =S_{v_n}(f)\\left(\\frac{K_{VDD}}{f}\\right)^2\n\\]\n\nUsing the angular pushing coefficient:\n\n\\[\nS_\\phi(f)=\\frac{K_\\omega^2\\,S_{v_n}(f)}{(2\\pi f)^2}\n\\]\n\nThe result is in \\(\\text{rad}^2/\\text{Hz}\\).\n\n---\n\n### 5. Single-sideband phase noise \\(\\mathcal{L}(f)\\)\n\nThe commonly quoted single-sideband phase noise normalized to the carrier is\n\n\\[\n\\boxed{\n\\mathcal{L}(f)=10\\log_{10}\\!\\left[\\frac{K_{VDD}^2\\,S_{v_n}(f)}{2f^2}\\right]\n\\quad\\text{dBc/Hz}\n}\n\\]\n\nor equivalently\n\n\\[\n\\boxed{\n\\mathcal{L}(f)=10\\log_{10}\\!\\left[\\frac{K_\\omega^2\\,S_{v_n}(f)}{2(2\\pi f)^2}\\right]\n\\quad\\text{dBc/Hz}\n}\n\\]\n\nIf \\(S_{v_n}=S_{\\text{th}}\\) is flat (pure thermal noise), the VCO phase noise falls as \\(1/f^2\\). If the LDO noise has a \\(1/f\\) component, that component produces a \\(1/f^3\\) phase-noise region.\n\n---\n\n### Summary of the calculation flow\n\n\\[\nS_{\\text{th}}(f)\\;\\xrightarrow{\\;Z_{\\text{out}},\\text{PSRR}\\;}\\;S_{v_n}(f)\n\\]\n\n\\[\nS_{v_n}(f)\\;\\xrightarrow{\\;K_{VDD}\\;}\\;S_{\\Delta f}(f)=K_{VDD}^2S_{v_n}(f)\n\\]\n\n\\[\nS_{\\Delta f}(f)\\;\\xrightarrow{\\;\\int dt\\;}\\;\nS_\\phi(f)=\\frac{K_{VDD}^2S_{v_n}(f)}{f^2}\n\\]\n\n\\[\nS_\\phi(f)\\;\\xrightarrow{\\;/2\\;}\\;\n\\mathcal{L}(f)=\\frac{K_{VDD}^2S_{v_n}(f)}{2f^2}\n\\]\n\nThat is the standard first-order calculation for supply‑noise-induced VCO phase noise. For higher accuracy, simulate supply-noise injection directly or use the impulse sensitivity function (ISF) method.",
        "format": "markdown",
        "sha256": "46ab8c3d75bdee7cfd19a8b32276af38398795f3f1ba9cf256c6345b370a7244"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and derives the frequency-noise to phase-noise conversion with the required 1/offset-frequency-squared dependence. It omits the circuit-specific insight that supply perturbation acts directly on the varactors, making Kpush closely related to KVCO and lower KVCO beneficial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3720,
        "output_tokens": 3538,
        "total_tokens": 7258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3720,
        "output_tokens": 3538,
        "total_tokens": 7258,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO output noise appears as a **low‑frequency noise voltage on the VCO supply**.  It modulates the oscillation frequency through the VCO’s **supply pushing** (or supply sensitivity), and the resulting phase noise is found by treating the VCO as a frequency modulator.\n\n### 1. Characterize the supply sensitivity\n\nDefine the supply pushing coefficient:\n\n\\[\nK_{VDD}=\\frac{\\partial f_{osc}}{\\partial V_{out}}\\quad\\text{[Hz/V]}\n\\]\n\nor, equivalently,\n\n\\[\nK_{VDD,\\omega}=2\\pi K_{VDD}=\\frac{\\partial \\omega_{osc}}{\\partial V_{out}}\\quad\\text{[rad/(s·V)]}\n\\]\n\nYou obtain \\(K_{VDD}\\) by simulation/measurement, e.g. apply a small DC or low‑frequency perturbation to the LDO output and observe the VCO frequency shift.\n\n### 2. Convert LDO voltage noise to frequency noise\n\nIf the LDO output voltage noise has a power spectral density\n\n\\[\nS_{th}(f)\\quad\\text{[V}^2/\\text{Hz]}\n\\]\n\nthe resulting **frequency‑noise PSD** is\n\n\\[\nS_{\\Delta f}(f)=K_{VDD}^{\\,2}\\,S_{th}(f)\\quad\\text{[Hz}^2/\\text{Hz]}\n\\]\n\nor in angular units,\n\n\\[\nS_{\\Delta\\omega}(f)=K_{VDD,\\omega}^{\\,2}\\,S_{th}(f)\n\\]\n\n### 3. Integrate frequency noise to get phase noise\n\nPhase is the integral of frequency deviation, so for an offset frequency \\(f=\\Delta f\\),\n\n\\[\nS_{\\phi}(f)=\\left(\\frac{K_{VDD}}{f}\\right)^2 S_{th}(f)\n\\quad\\text{[rad}^2/\\text{Hz]}\n\\]\n\nIf \\(K_{VDD,\\omega}\\) is used:\n\n\\[\nS_{\\phi}(f)=\\left(\\frac{K_{VDD,\\omega}}{2\\pi f}\\right)^2 S_{th}(f)\n\\]\n\n### 4. Single-sideband phase noise\n\nThe quantity normally reported by a phase-noise analyzer is the single-sideband phase noise \\(L(f)\\), which is\n\n\\[\n\\boxed{\nL(f)=\\frac{1}{2}S_{\\phi}(f)\n     =\\frac{K_{VDD}^{\\,2}}{2f^{2}}\\,S_{th}(f)\n}\n\\]\n\nor, using \\(K_{VDD,\\omega}\\),\n\n\\[\n\\boxed{\nL(f)=\\frac{K_{VDD,\\omega}^{\\,2}}{8\\pi^{2}f^{2}}\\,S_{th}(f)\n}\n\\]\n\nIn dBc/Hz:\n\n\\[\n\\mathcal{L}(f)=10\\log_{10}\\!\\left(\\frac{K_{VDD}^{\\,2}S_{th}(f)}{2f^{2}}\\right)\n\\]\n\n### Practical procedure\n\n1. **Find \\(K_{VDD}\\)** for the VCO by applying a small perturbation to the LDO output and measuring the frequency change.\n2. **Measure or model** the LDO output voltage-noise spectrum \\(S_{th}(f)\\).\n3. **Plug into** the formula above.\n\nAssumptions: the offset frequency \\(f\\) is much smaller than the carrier frequency, the noise is small, and \\(K_{VDD}\\) captures all supply-to-frequency conversion mechanisms (varactor bias, device capacitances, AM-to-PM, etc.). If the VCO is inside a PLL, multiply the open-loop result by the PLL’s noise transfer function.",
        "format": "markdown",
        "sha256": "d6b53849100ec4a2119aa56f9af4444fdecd687204d251088e146fc26337d087"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and gives the appropriate noise-to-frequency-to-phase conversion with the 1/offset-frequency-squared dependence. It omits the circuit-specific design insight that supply noise acts directly on the varactors, making supply pushing closely related to KVCO, so reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3718,
        "output_tokens": 8758,
        "total_tokens": 12476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3718,
        "output_tokens": 8758,
        "total_tokens": 12476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise is just a random modulation of the VCO’s supply voltage \\(V_{\\text{out}}\\). To find the phase noise it creates, the standard procedure is:\n\n1. **Find the supply-to-frequency sensitivity**  \n   Define the oscillator’s voltage-to-frequency (or “supply pushing”) gain\n\n   \\[\n   K_{VDD} \\;=\\; \\frac{\\partial \\omega_{osc}}{\\partial V_{\\text{out}}}\n   \\]\n\n   units of \\(\\text{rad/(s·V)}\\) if you work in \\(\\omega\\), or\n\n   \\[\n   K_f \\;=\\; \\frac{\\partial f_{osc}}{\\partial V_{\\text{out}}}\n   \\]\n\n   units of \\(\\text{Hz/V}\\).  You can obtain it by:\n   - simulating the oscillator frequency versus \\(V_{\\text{out}}\\), or\n   - analytically differentiating the tank resonant frequency if you know the voltage-dependent capacitances:\n\n   \\[\n   \\omega_{osc} \\approx \\frac{1}{\\sqrt{L_{\\text{eff}}\\,C_{\\text{tot}}(V_{\\text{out}})}}\n   \\quad\\Rightarrow\\quad\n   K_{VDD}=-\\frac{\\omega_{osc}}{2C_{\\text{tot}}}\n   \\frac{\\partial C_{\\text{tot}}}{\\partial V_{\\text{out}}}\n   \\]\n\n   Here \\(C_{\\text{tot}}\\) includes varactors, transistor parasitics, and any switched capacitor banks.\n\n2. **Convert LDO noise to a supply-voltage noise PSD**  \n   If \\(S_{th}\\) is the LDO output-referred noise voltage PSD at \\(V_{\\text{out}}\\) (\\(\\text{V}^2/\\text{Hz}\\)), use it directly.  \n   If instead it is an internal noise current or device noise, multiply by the LDO output impedance / transfer function to obtain the actual voltage-noise PSD at the VCO rail:\n\n   \\[\n   S_{V_{\\text{out}}}(f) = \\bigl|Z_{\\text{out,LDO}}(f)\\bigr|^2 S_{th}(f)\n   \\]\n\n3. **Treat the noise as frequency modulation**  \n   A small supply-voltage fluctuation \\(v_n(t)\\) creates a frequency fluctuation\n\n   \\[\n   \\Delta \\omega(t) = K_{VDD}\\,v_n(t)\n   \\]\n\n   Phase is the integral of frequency, so in the frequency domain the phase-noise PSD is\n\n   \\[\n   S_\\phi(\\Delta\\omega)\n   = \\left|\\frac{K_{VDD}}{j\\Delta\\omega}\\right|^2 S_{V_{\\text{out}}}(\\Delta\\omega)\n   = \\frac{K_{VDD}^2}{\\Delta\\omega^2}\\,S_{V_{\\text{out}}}(\\Delta\\omega)\n   \\]\n\n   In Hz-offset form with \\(K_f\\) in Hz/V:\n\n   \\[\n   S_\\phi(\\Delta f)\n   = \\left(\\frac{K_f}{\\Delta f}\\right)^2 S_{V_{\\text{out}}}(\\Delta f)\n   \\]\n\n4. **Convert to single-sideband phase noise**  \n   Depending on whether you use single-sided or double-sided phase PSD definitions,\n\n   \\[\n   \\mathcal{L}(\\Delta f)\n   = \\frac{1}{2}\\left(\\frac{K_f}{\\Delta f}\\right)^2 S_{V_{\\text{out}}}(\\Delta f)\n   \\]\n\n   is the usual SSB phase noise in \\(\\text{dBc/Hz}\\).  With angular frequency:\n\n   \\[\n   \\mathcal{L}(\\Delta\\omega)\n   = \\frac{K_{VDD}^2}{2\\,\\Delta\\omega^2}\\,S_{V_{\\text{out}}}(\\Delta\\omega)\n   \\]\n\n5. **Result for white thermal noise**  \n   If \\(S_{V_{\\text{out}}}=S_{th}= \\text{constant}\\) (white thermal noise), the phase noise falls as \\(1/\\Delta f^2\\):\n\n   \\[\n   \\boxed{\\;\n   \\mathcal{L}(\\Delta f)\n   \\approx\n   \\frac{K_f^2\\,S_{th}}{2\\,(\\Delta f)^2}\n   \\;}\n   \\]\n\n   or, in rad/s units,\n\n   \\[\n   \\boxed{\\;\n   \\mathcal{L}(\\Delta\\omega)\n   \\approx\n   \\frac{K_{VDD}^2\\,S_{th}}{2\\,(\\Delta\\omega)^2}\n   \\;}\n   \\]\n\nThe key physical point is that the LDO’s thermal noise does **not** add directly as amplitude noise; it modulates the oscillator frequency through the supply pushing coefficient \\(K_{VDD}\\), and because phase is the integral of frequency, the resulting phase noise has a \\(1/\\Delta f^2\\) shape.",
        "format": "markdown",
        "sha256": "ba72b3e5533dd0175b29fce99535bdb8cfdb95d5bb57d98c493d43edf8153725"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and derives the FM-to-phase-noise conversion with the expected 1/Δf² dependence. It omits the circuit-specific design insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO, so reducing KVCO reduces the conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3720,
        "output_tokens": 6841,
        "total_tokens": 10561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3720,
        "output_tokens": 6841,
        "total_tokens": 10561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a tail capacitor \\(C_T\\) from the common‑source node \\(P\\) to ground generally **reduces (improves) the phase noise**, especially at moderate‑to‑large offset frequencies.\n\nWhy:\n\n* **It bypasses tail‑current‑source noise.**  \n  The tail current source \\(I_{SS}\\) is one of the dominant noise contributors. At RF, \\(C_T\\) presents a low impedance, so noise current from \\(I_{SS}\\) is shunted to ground rather than modulating the bias of the switching pair \\(M_1/M_2\\). This lowers the noise voltage at node \\(P\\).\n\n* **It stabilizes the tail voltage.**  \n  During switching, node \\(P\\) has a ripple mostly at the second harmonic \\(2f_0\\). A large \\(C_T\\) holds \\(V_P\\) more constant, making the cross‑coupled pair switch harder and increasing the oscillation amplitude. Larger amplitude directly improves Leeson‑type phase noise.\n\n* **It is a common‑mode load.**  \n  Because \\(P\\) is a common‑mode node, an ideal symmetric differential oscillator does not “see” \\(C_T\\) in the differential resonant tank. Thus \\(C_T\\) does not normally lower the tank \\(Q\\) or shift the oscillation frequency.\n\nCaveats:\n\n* **Near‑carrier (\\(1/f^3\\)) noise may improve less**, because at very low frequencies \\(C_T\\) has high impedance and cannot effectively filter the tail transistor’s flicker noise.\n* **Too large a \\(C_T\\)** can create a low‑frequency common‑mode resonance with parasitic inductance (bond wires, supply path, etc.), which can degrade phase noise or cause spurious oscillations. So there is an optimum value.\n\n**Bottom line:** a properly sized tail capacitor \\(C_T\\) lowers phase noise by filtering tail current noise and stabilizing the common‑source node, without disturbing the differential resonant frequency.",
        "format": "markdown",
        "sha256": "8b1ad5e322a87cb9124bf5c7a4f83f6504e121f257817c18ede69d41da8358da"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It acknowledges a possible optimum, but explains the tradeoff only generically as tail-noise filtering versus excessive capacitance. It misses the key class-C peak-current improvement and Razavi’s specific degradations, so its claim that CT generally improves phase noise is misleading.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3850,
        "output_tokens": 4931,
        "total_tokens": 8781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3850,
        "output_tokens": 4931,
        "total_tokens": 8781,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4520,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a tail capacitor \\(C_T\\) from node \\(P\\) to ground generally **reduces the phase noise**, but only up to an optimum value.\n\nWhy it helps:\n\n* **It bypasses high‑frequency noise from the tail current source \\(I_{SS}\\).**  \n  \\(C_T\\) lowers the impedance at the tail node at the oscillation frequency and its harmonics, so the wideband thermal noise of \\(I_{SS}\\) is shunted to ground rather than injected into the switching pair.\n\n* **It reduces tail‑node ripple, especially the strong second‑harmonic component.**  \n  Lower ripple at \\(P\\) means less AM‑to‑PM conversion through transistor and varactor nonlinearities, which improves close‑in phase noise.\n\n* **It reduces noise folding.**  \n  Noise sidebands around \\(f_0\\), \\(2f_0\\), etc. from the bias source are less efficiently mixed down to the carrier offset by the switching action of \\(M_1/M_2\\).\n\nCaveats:\n\n* At very small offset frequencies, \\(C_T\\) is essentially an open circuit, so it does **not** suppress the low‑frequency/flicker noise of \\(I_{SS}\\).\n* If \\(C_T\\) is made too large, it can load the switching pair, reduce the oscillation amplitude, add parasitic loss, or create an unwanted tail‑node resonance. Since phase noise improves with larger swing, an **overly large \\(C_T\\) can eventually degrade phase noise**.\n\nSo the typical behavior is:\n\n\\[\n\\text{phase noise improves as } C_T \\text{ is increased} \\rightarrow \\text{reaches a minimum} \\rightarrow \\text{may worsen if } C_T \\text{ is excessive}.\n\\]",
        "format": "markdown",
        "sha256": "d686ffafd2a6ab9f8ab5994ee5f552e575ac768c84ecef9602f23ba21ec551c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly describes a nonmonotonic trend, but explains it only with generic filtering and loading effects. It misses the class-C peak-current improvement and Razavi’s specific degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3850,
        "output_tokens": 5693,
        "total_tokens": 9543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3850,
        "output_tokens": 5693,
        "total_tokens": 9543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding capacitor \\(C_T\\) to the **tail/common-source node** of this cross-coupled NMOS LC oscillator **reduces (improves) the phase noise**.\n\n### Why?\n\n1. **Filters tail-current-source noise.**  \n   The tail current source \\(I_{SS}\\) contributes significant thermal and flicker noise. A large \\(C_T\\) provides a low-impedance path to ground for high-frequency noise currents, so less of that noise reaches the switching pair \\(M_1/M_2\\).\n\n2. **Suppresses the \\(2f_0\\) tail-voltage component.**  \n   In a switched differential pair, the tail node voltage has a strong second-harmonic component at \\(2f_0\\). \\(C_T\\) shunts this harmonic to ground, stabilizing the tail voltage and making the waveform more symmetric. This reduces up-conversion of low-frequency noise (including \\(1/f\\) flicker noise) into close-in phase noise.\n\n3. **Reduces down-conversion of noise around \\(2f_0\\).**  \n   Tail noise near \\(2f_0 \\pm \\Delta f\\) is mixed down by the switching transistors to phase noise around \\(f_0 \\pm \\Delta f\\). By lowering the tail impedance at \\(2f_0\\), \\(C_T\\) attenuates this dominant noise mechanism.\n\n### Caveat\n\\(C_T\\) must be large enough to be effective at the frequencies of interest. If it is too small, parasitic inductance at the tail node could resonate with it near \\(2f_0\\), potentially worsening noise instead. But in the intended design, the effect is **phase-noise reduction**.",
        "format": "markdown",
        "sha256": "f1def84e02a6030201ada04c0baa8c34e22145cc9aa7a8aba909a65a2d5eb39d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that CT monotonically improves phase noise through tail-node filtering, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3852,
        "output_tokens": 4103,
        "total_tokens": 7955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3852,
        "output_tokens": 4103,
        "total_tokens": 7955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **dual, cross‑coupled LC oscillator** (two identical LC oscillator cores coupled together, usually to obtain quadrature outputs).  \n\nFor each core the oscillation frequency is set essentially by its LC tank resonance:\n\n\\[\nf_{osc}\\;\\approx\\;f_0\\;=\\;\\frac{1}{2\\pi\\sqrt{L\\,C_{eff}}}\n\\]\n\nwhere:\n\n* \\(L\\) = inductance of each load inductor (the two top inductors and the two bottom inductors are identical),\n* \\(C_{eff}\\) = total effective capacitance loading each tank.  \n  This includes any explicit capacitors/varactors plus the parasitic capacitances of the MOSFETs (\\(C_{gs}, C_{gd}, C_{db}\\)), the coupling transistors, wiring, and any external load.\n\nBecause the two cores are identical and weakly coupled, they lock to the same frequency, which is very close to the individual tank resonant frequency. The coupling only introduces a small frequency “pull” (and the quadrature phase relationship) compared with the bare LC resonance.\n\n### Startup note\nFor oscillation to start, the negative resistance provided by the cross‑coupled pairs must exceed the tank losses, e.g. \\(g_{m,\\text{total}}R_p > 1\\). This condition does not change the oscillation frequency estimate significantly.\n\n### Numerical example\nWithout component values a numerical answer cannot be computed, but if for example:\n\n\\[\nL = 1\\ \\text{nH}, \\qquad C_{eff} = 1\\ \\text{pF}\n\\]\n\nthen\n\n\\[\nf_{osc} \\approx \\frac{1}{2\\pi\\sqrt{(1\\ \\text{nH})(1\\ \\text{pF})}} \\approx 5.0\\ \\text{GHz}.\n\\]\n\nIf you provide the actual \\(L\\) and \\(C_{eff}\\) values, the frequency can be plugged into the formula above.",
        "format": "markdown",
        "sha256": "dcf7d0b24acbe78e9b08a45547c40d9878fa633cfd5308afaa0c82150b017041"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the tank-resonance estimate and notes a qualitative coupling-induced pull, but does not estimate that shift or provide its dependence on coupling and Q—the key part of the expected answer.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2001,
        "output_tokens": 5294,
        "total_tokens": 7295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2001,
        "output_tokens": 5294,
        "total_tokens": 7295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This circuit consists of **two identical cross-coupled LC oscillators** that are AC-coupled together. Each half is a differential NMOS LC VCO with inductors connected to the supply and cross-coupled pairs providing negative resistance.\n\nBecause the two tanks are matched and lock to each other, the oscillation frequency is set primarily by the resonance of each LC tank:\n\n### Estimate:\n\n\\[\n\\boxed{f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{LC_{\\text{tot}}}}}\n\\]\n\nwhere:\n\n- **\\(L\\)** = inductance of each spiral inductor  \n- **\\(C_{\\text{tot}}\\)** = total capacitance seen at each oscillation node (\\(X_1, Y_1, X_2, Y_2\\))\n\nThe total capacitance includes:\n\n- Parasitic capacitances of the NMOS transistors  \n  - drain-to-bulk \\(C_{DB}\\)\n  - gate-to-drain \\(C_{GD}\\)\n  - Miller-multiplied gate-to-source \\(C_{GS}\\)\n- Capacitive loading from the coupling interconnects and the other oscillator\n- Any intentional varactor or load capacitance (none explicitly shown)\n\nThe coupling causes the two oscillators to lock to a **common frequency** near their natural tank resonance. Depending on the coupling polarity, the two outputs may be in **quadrature** (90° phase shift), but the frequency estimate remains approximately \\(1/(2\\pi\\sqrt{LC_{\\text{tot}}})\\), with only a small frequency pulling correction due to the finite tank \\(Q\\) and coupling strength.\n\nSo the bottom-line estimate is simply the **LC tank resonant frequency**.",
        "format": "markdown",
        "sha256": "fe5a236874b8a5fa82cc77c656baf5ceab69eca5561bf78ae78bede91524b2c1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct uncoupled tank resonance and acknowledges coupling-related frequency pulling, but does not estimate the shift. The key result should include a term such as Δω ≈ αω₀/(2Q); presenting the tank frequency as the bottom-line estimate misses the central effect.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2001,
        "output_tokens": 2699,
        "total_tokens": 4700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2563,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2001,
        "output_tokens": 2699,
        "total_tokens": 4700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2563,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "thinking",
        "api_model": "moonshotai/kimi-k2.7-code",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **coupled LC oscillator** (most likely a quadrature LC‑VCO made of two identical cross‑coupled NMOS LC cores).  \nTo first order, the oscillation frequency is set by the resonance of each LC tank:\n\n\\[\n\\boxed{f_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_T}}}\n\\]\n\nwhere\n\n* \\(L\\) = inductance of one tank inductor (e.g. the inductors connected to \\(X_1\\) or \\(Y_1\\)),\n* \\(C_T\\) = total capacitance seen at one oscillator node to AC ground.\n\nThe total node capacitance includes:\n\n\\[\nC_T \\approx C_{\\text{varactor}} + C_{\\text{load}} + C_{db,\\text{core}} + C_{db,\\text{coupling}}\n+ 2C_{gd,\\text{core}} + C_{gs,\\text{coupling}} + \\text{other parasitics}\n\\]\n\nThe cross‑coupled transistors provide the negative resistance that compensates tank losses, while the current sources \\(I_{SS}\\) and \\(I_1\\) set the transconductance and the coupling strength. The coupling between the two stages causes only a small frequency shift,\n\n\\[\nf_{\\text{osc}} \\approx f_0\\left[1 \\pm O\\!\\left(\\frac{1}{2Q}\\cdot \\text{coupling ratio}\\right)\\right],\n\\]\n\nwhere \\(f_0 = 1/(2\\pi\\sqrt{LC_T})\\) and \\(Q\\) is the tank quality factor. For weak coupling this shift is usually negligible.\n\n---\n\n### If you want a number…\n\nNo component values are given in the figure, so a numeric frequency cannot be computed.  \nAs an example, if each side had\n\n\\[\nL = 2\\ \\text{nH},\\qquad C_T = 200\\ \\text{fF},\n\\]\n\nthen\n\n\\[\nf_{\\text{osc}} \\approx \\frac{1}{2\\pi\\sqrt{(2\\ \\text{nH})(200\\ \\text{fF})}}\n\\approx 2.5\\ \\text{GHz}.\n\\]\n\nIf you provide the inductor value, device sizes, and technology capacitances, the frequency can be estimated more accurately.",
        "format": "markdown",
        "sha256": "9a8d13cc8097760fd841f06e6e9128abeee0841937a7523948d31ee89d16ae69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly gives the tank resonance and a coupling-induced shift scaling as the coupling ratio divided by 2Q. However, the coupling ratio is left undefined and the shift is only stated in big-O form rather than identifying it with I1/ISS or gmc/gm1.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1999,
        "output_tokens": 7914,
        "total_tokens": 9913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1999,
        "output_tokens": 7914,
        "total_tokens": 9913,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    }
  ]
}
