{
  "model_key": "minimax_m31_flash",
  "display_name": "MiniMax M3.1 Flash",
  "provider": "minimax",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "MiniMax M3.1 Flash answered the 50 tasks in three rollouts through MiniMax's own chat completions API (MiniMax-M3.1-Flash) at maximum reasoning effort. Requests set max_completion_tokens to 524,288, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for MiniMax M3.1 Flash on 2026-11-10 ($0.15 input, $0.015 cached input, $0.60 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 84,
          "incorrect_count": 66,
          "partial_credit_count": 54,
          "zero_count": 12,
          "mean_score_0_to_4": 2.9066666666666667,
          "score_percent": 72.66666666666667,
          "score_distribution": {
            "0": 12,
            "1": 21,
            "2": 20,
            "3": 13,
            "4": 84
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 84,
          "incorrect_count": 66,
          "partial_credit_count": 54,
          "zero_count": 12,
          "mean_score_0_to_4": 2.9066666666666667,
          "score_percent": 72.66666666666667,
          "score_distribution": {
            "0": 12,
            "1": 21,
            "2": 20,
            "3": 13,
            "4": 84
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 68,
          "incorrect_count": 22,
          "partial_credit_count": 12,
          "zero_count": 10,
          "mean_score_0_to_4": 3.2888888888888888,
          "score_percent": 82.22222222222221,
          "score_distribution": {
            "0": 10,
            "1": 3,
            "2": 6,
            "3": 3,
            "4": 68
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 68,
          "incorrect_count": 22,
          "partial_credit_count": 12,
          "zero_count": 10,
          "mean_score_0_to_4": 3.2888888888888888,
          "score_percent": 82.22222222222221,
          "score_distribution": {
            "0": 10,
            "1": 3,
            "2": 6,
            "3": 3,
            "4": 68
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 16,
          "incorrect_count": 44,
          "partial_credit_count": 42,
          "zero_count": 2,
          "mean_score_0_to_4": 2.3333333333333335,
          "score_percent": 58.333333333333336,
          "score_distribution": {
            "0": 2,
            "1": 18,
            "2": 14,
            "3": 10,
            "4": 16
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 16,
          "incorrect_count": 44,
          "partial_credit_count": 42,
          "zero_count": 2,
          "mean_score_0_to_4": 2.3333333333333335,
          "score_percent": 58.333333333333336,
          "score_distribution": {
            "0": 2,
            "1": 18,
            "2": 14,
            "3": 10,
            "4": 16
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 29,
        "incorrect_count": 21,
        "partial_credit_count": 19,
        "zero_count": 2,
        "mean_score_0_to_4": 3.12,
        "score_percent": 78.0,
        "score_distribution": {
          "0": 2,
          "1": 5,
          "2": 7,
          "3": 7,
          "4": 29
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 27,
        "incorrect_count": 23,
        "partial_credit_count": 18,
        "zero_count": 5,
        "mean_score_0_to_4": 2.8,
        "score_percent": 70.0,
        "score_distribution": {
          "0": 5,
          "1": 7,
          "2": 8,
          "3": 3,
          "4": 27
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 28,
        "incorrect_count": 22,
        "partial_credit_count": 17,
        "zero_count": 5,
        "mean_score_0_to_4": 2.8,
        "score_percent": 70.0,
        "score_distribution": {
          "0": 5,
          "1": 9,
          "2": 5,
          "3": 3,
          "4": 28
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 195872,
        "input_tokens": 302592,
        "output_tokens": 2674237,
        "total_tokens": 2976829
      },
      "known_totals": {
        "cached_input_tokens": 195872,
        "input_tokens": 302592,
        "output_tokens": 2674237,
        "total_tokens": 2976829
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 24,
          "incorrect_count": 6,
          "partial_credit_count": 4,
          "zero_count": 2,
          "mean_score_0_to_4": 3.533333333333333,
          "score_percent": 88.33333333333333,
          "score_distribution": {
            "0": 2,
            "2": 2,
            "3": 2,
            "4": 24
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 23,
          "incorrect_count": 7,
          "partial_credit_count": 3,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2333333333333334,
          "score_percent": 80.83333333333333,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "2": 2,
            "4": 23
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 21,
          "incorrect_count": 9,
          "partial_credit_count": 5,
          "zero_count": 4,
          "mean_score_0_to_4": 3.1,
          "score_percent": 77.5,
          "score_distribution": {
            "0": 4,
            "1": 2,
            "2": 2,
            "3": 1,
            "4": 21
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 15,
          "zero_count": 0,
          "mean_score_0_to_4": 2.5,
          "score_percent": 62.5,
          "score_distribution": {
            "1": 5,
            "2": 5,
            "3": 5,
            "4": 5
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 4,
          "incorrect_count": 16,
          "partial_credit_count": 15,
          "zero_count": 1,
          "mean_score_0_to_4": 2.15,
          "score_percent": 53.75,
          "score_distribution": {
            "0": 1,
            "1": 6,
            "2": 6,
            "3": 3,
            "4": 4
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 12,
          "zero_count": 1,
          "mean_score_0_to_4": 2.35,
          "score_percent": 58.75,
          "score_distribution": {
            "0": 1,
            "1": 7,
            "2": 3,
            "3": 2,
            "4": 7
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The MOSFET’s **intrinsic voltage gain**,\n\n\\[\nA_{v,\\text{int}}=\\frac{g_m}{g_{ds}}\\approx g_m r_o,\n\\]\n\n**approximately doubles**, assuming long-channel behavior and fixed overdrive.\n\nDoubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, so \\(g_m\\) is unchanged. However, channel-length modulation decreases roughly as \\(1/L\\), causing \\(g_{ds}\\) to halve and \\(r_o\\) to double. Thus,\n\n\\[\nA'_{v,\\text{int}} \\approx 2A_{v,\\text{int}}.\n\\]\n\nShort-channel effects and other nonidealities can modify this result.",
        "format": "markdown",
        "sha256": "f8220123c8475afa1109ebecf6016572d9a8394f0142df98680bdde21db8596b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions keeps W/L, gm, and drain current approximately unchanged at fixed overdrive, while reduced channel-length modulation doubles ro and intrinsic gain.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 220,
        "output_tokens": 1512,
        "total_tokens": 1732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 220,
        "output_tokens": 1512,
        "total_tokens": 1732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "For a MOSFET in saturation, the intrinsic gain is approximately\n\n\\[\nA_{v,\\text{int}}=\\frac{g_m}{g_{ds}}=g_m r_o.\n\\]\n\nDoubling both \\(W\\) and \\(L\\):\n\n- \\(W/L\\) remains unchanged, so \\(I_D\\) and \\(g_m\\) remain approximately unchanged at the same overdrive.\n- Doubling \\(L\\) approximately doubles the Early voltage \\(V_A\\), so \\(r_o=V_A/I_D\\) doubles and \\(g_{ds}\\) halves.\n\nTherefore,\n\n\\[\n\\boxed{A_{v,\\text{int}}\\text{ approximately doubles}.}\n\\]\n\nThis assumes long-channel behavior and channel-length modulation; in short-channel devices, the increase may be less than \\(2\\times\\).",
        "format": "markdown",
        "sha256": "a2d1780789735ca93c3c878a3cf24b7159504c526d0cc8ee8fe3b3b412b85d31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that at constant overdrive, doubling both dimensions leaves gm and ID approximately unchanged while the increased length roughly doubles ro, so intrinsic gain approximately doubles. The stated short-channel caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 219,
        "input_tokens": 220,
        "output_tokens": 2279,
        "total_tokens": 2499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 219,
        "input_tokens": 220,
        "output_tokens": 2279,
        "total_tokens": 2499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "For a MOSFET, the intrinsic voltage gain is approximately\n\n\\[\nA_{v,\\text{int}}=g_m r_o \\approx \\frac{2}{\\lambda},\n\\]\n\nwhere \\(\\lambda\\) is the channel-length-modulation parameter. Since \\(\\lambda\\) is roughly inversely proportional to channel length \\(L\\), doubling \\(L\\) doubles \\(r_o\\) and hence the intrinsic gain. Doubling \\(W\\) keeps \\(W/L\\) unchanged, so \\(g_m\\) is essentially unchanged at the same bias.\n\n**Therefore, doubling both \\(W\\) and \\(L\\) approximately doubles the intrinsic gain**, assuming the same bias current/overdrive and ignoring short-channel effects.",
        "format": "markdown",
        "sha256": "ac82717c9c68d08b5667a00958c9a8f3f6931622a3e95fdf195e705a5b2d0226"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion and scaling are correct under the stated bias assumptions: doubling L increases ro while gm stays approximately unchanged. However, Av,int ≈ 2/λ is missing the overdrive-voltage factor and is dimensionally incorrect.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 219,
        "input_tokens": 220,
        "output_tokens": 1601,
        "total_tokens": 1821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1467,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 219,
        "input_tokens": 220,
        "output_tokens": 1601,
        "total_tokens": 1821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1467,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct**, assuming a long-channel MOSFET operating in saturation.\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n=\\mu C_{ox}\\frac{W}{L}(V_{GS}-V_T)\n\\]\n\nThus transconductance increases with overdrive voltage \\(V_{OV}=V_{GS}-V_T\\):\n\n\\[\ng_m \\propto V_{OV}\n\\]\n\nEquivalently, \\(g_m=2I_D/V_{OV}\\).",
        "format": "markdown",
        "sha256": "2b2b451daf385e966e5f421c04e0a27b2d54c4988fa1a7adc1f4c644abb91de2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A and shows that, for a given device size in saturation, gm is proportional to overdrive voltage. Discussing Student B's fixed-current condition is not required.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 232,
        "output_tokens": 498,
        "total_tokens": 730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 232,
        "output_tokens": 498,
        "total_tokens": 730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 397,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct**—for a MOSFET operating in saturation under the square-law model,\n\n\\[\nI_D = \\frac{1}{2}k(V_{GS}-V_{TH})^2\n\\]\n\nso\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=k(V_{GS}-V_{TH})=kV_{OV}.\n\\]\n\nThus, transconductance increases as the overdrive voltage \\(V_{OV}=V_{GS}-V_{TH}\\) increases. This assumes saturation-region operation and approximately constant device parameters.",
        "format": "markdown",
        "sha256": "3309e6c06ce9356627665a70256f652f385c298224676032420c4aadd64ccf72"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right and derives that, for fixed device parameters (including fixed W/L), gm = kVOV increases with overdrive. The fixed-current alternative is not required.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 231,
        "input_tokens": 232,
        "output_tokens": 315,
        "total_tokens": 547,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 231,
        "input_tokens": 232,
        "output_tokens": 315,
        "total_tokens": 547,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 202,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct**—for a MOSFET operating in saturation (using the square-law model),\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n= \\mu_n C_{\\text{ox}}\\frac{W}{L}(V_{GS}-V_T)\n\\]\n\nso the transconductance increases as the overdrive voltage \\(V_{OV}=V_{GS}-V_T\\) increases.\n\nWhat decreases with increasing overdrive is often the **transconductance efficiency** \\(g_m/I_D\\), not \\(g_m\\) itself.",
        "format": "markdown",
        "sha256": "4e97d6f8a4872c15e9a756ff785841aa80fb390f3c5a456ee1fe4686e8619d50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size and explains that, in the square-law model, gm increases with overdrive. The gm/ID distinction is also correct.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 231,
        "input_tokens": 232,
        "output_tokens": 373,
        "total_tokens": 605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 231,
        "input_tokens": 232,
        "output_tokens": 373,
        "total_tokens": 605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Not literally. A PMOS has the **same basic small-signal circuit topology** as an NMOS—controlled current source \\(g_m v_{gs}\\), output resistance \\(r_o=1/g_{ds}\\), and parasitic capacitances—but with reversed voltage and current polarities.\n\nFor an NMOS:\n\\[\ni_d = g_m v_{gs}+g_{ds}v_{ds}+\\cdots\n\\]\nwhere \\(v_{gs}=v_g-v_s\\), and the controlled current flows from drain to source.\n\nFor a PMOS, it is often more convenient to write:\n\\[\ni_{sd}=g_{m,p}v_{sg}+g_{ds,p}v_{sd}+\\cdots\n\\]\nwhere \\(v_{sg}=v_s-v_g\\), and the controlled current flows from source to drain.\n\nIn the long-channel approximation,\n\\[\ng_{m,n}\\approx k_n\\frac WL(V_{GS}-V_{TN}),\\qquad\ng_{m,p}\\approx k_p\\frac WL(V_{SG}-|V_{TP}|).\n\\]\n\nThus, the PMOS model can be viewed as an NMOS model with source and drain interchanged and gate/source voltage polarity reversed. The actual parameter values are not identical because carrier mobility, threshold voltage, body effect, capacitances, and channel-length modulation differ. If standard signed NMOS-style variables are used for a PMOS, the transconductance and current-source direction appear with the opposite signs.",
        "format": "markdown",
        "sha256": "20f4684ecf5e6a9b246eccb14f2b0b279e2e3f95e9248ce8bdba907604aa0a4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the PMOS small-signal model has the same basic form as the NMOS model, with reversed polarity and sign conventions. This satisfies the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 222,
        "output_tokens": 3299,
        "total_tokens": 3521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 222,
        "output_tokens": 3299,
        "total_tokens": 3521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "They have the **same basic small-signal model structure**, but **not identical voltage/current polarities**.\n\n| NMOS | PMOS |\n|---|---|\n| Control voltage: \\(v_{gs}=v_g-v_s\\) | Control voltage: \\(v_{sg}=v_s-v_g\\) |\n| Conventional drain current: drain \\(\\rightarrow\\) source | Conventional drain current: source \\(\\rightarrow\\) drain |\n| \\(i_{ds}\\approx g_m v_{gs}+g_o v_{ds}\\) | \\(i_{sd}\\approx g_m v_{sg}+g_o v_{sd}\\) |\n\nHere \\(i_{sd}\\) for the PMOS is defined from source to drain. Thus, if voltage and current directions are reversed appropriately, the PMOS equations have the same form as the NMOS equations.\n\nBoth models contain the same elements: a gate controlled current source \\(g_mv_{gs}\\) (or \\(g_mv_{sg}\\)), drain-source resistance \\(r_o\\), and parasitic capacitances. However, their **numerical parameters**—\\(g_m\\), \\(g_o\\), threshold voltage, mobility, capacitances, and body-effect parameters—generally differ. A PMOS is therefore best viewed as the **voltage/current-polarity dual** of an NMOS rather than an identical device.",
        "format": "markdown",
        "sha256": "060cf51ab4969e9f7d5aeca62690ea1e4e71ade5130eea8c94da4b85c2758bb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS has the same basic small-signal model structure as the NMOS when voltage and current polarities are chosen consistently.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 222,
        "output_tokens": 1797,
        "total_tokens": 2019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 222,
        "output_tokens": 1797,
        "total_tokens": 2019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1534,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Structurally, yes; numerically and in sign conventions, not exactly.**\n\nBoth devices have the same basic small-signal equivalent circuit:\n\n- A voltage-controlled current source \\(g_m v_{gs}\\)\n- Output resistance \\(r_o\\) (or \\(g_o\\))\n- Gate capacitances such as \\(C_{gs}\\), \\(C_{gd}\\), and \\(C_{gb}\\)\n- Optionally, body-effect transconductance \\(g_{mb}\\)\n\nFor an NMOS using drain-to-source current,\n\n\\[\ni_d = g_m v_{gs}+g_o v_{ds}.\n\\]\n\nFor a PMOS, if voltages and current are defined in the natural source-to-drain direction,\n\n\\[\nv_{sg}=v_s-v_g,\\qquad v_{sd}=v_s-v_d,\n\\]\n\nthen\n\n\\[\ni_{sd}=g_m v_{sg}+g_o v_{sd}.\n\\]\n\nThus the PMOS small-signal model is analogous to the NMOS model, with voltage and current polarities reversed where necessary. If the same \\(v_{gs},v_{ds},i_d\\) conventions are used for both, the controlled-source direction and signs must be adjusted.\n\nHowever, their **parameter values are not identical**: hole mobility differs from electron mobility, thresholds have opposite polarity, output resistances and capacitances differ, and body-effect and short-channel effects may also differ. Therefore:\n\n> **The PMOS and NMOS small-signal models have the same form, but their signs, parameter values, and device-specific nonidealities are different.**",
        "format": "markdown",
        "sha256": "5b9ba2920e958ae4dbb1a2369fd97bf69000d2eb6b8b65c9271bce8701ec409a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model has the same form as the NMOS model, with polarity/sign conventions adjusted; this meets the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 222,
        "output_tokens": 2193,
        "total_tokens": 2415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 222,
        "output_tokens": 2193,
        "total_tokens": 2415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1880,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The gate and drain of \\(M_1\\) are tied together, so it operates as a **diode-connected MOSFET**.\n\n### If the source arrow is interpreted as a p-channel MOSFET\n\nThe outward-pointing source arrow indicates p-channel behavior. Let \\(V_{TP}<0\\) be its threshold voltage. Since the source is grounded,\n\n\\[\nV_{GS}=V_X .\n\\]\n\nThe transistor is off for \\(V_X\\ge V_{TP}\\) and conducts for \\(V_X<V_{TP}\\). Using the ideal square-law model,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\ge V_{TP},\\\\[4pt]\n-\\dfrac{1}{2}k_p\\left(V_X-V_{TP}\\right)^2, & V_X<V_{TP},\n\\end{cases}\n\\]\n\nwhere \\(k_p=\\mu_p C_{\\mathrm{ox}}(W/L)\\). The minus sign occurs because the actual current flows opposite to the indicated \\(I_X\\) arrow.\n\n```text\n                         IX\n                         ↑\n                         │\n        ╲                │\n         ╲               │\n          ╲              │\n           ╲____●────────┼────────────→ VX\n                VTP\n```\n\nThus, the characteristic is zero to the right of \\(V_{TP}\\) and follows a downward parabolic branch in the third quadrant.\n\n### If the device was intended to be an n-channel MOSFET\n\nMirror the result about the origin:\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{1}{2}k_n\\left(V_X-V_{TN}\\right)^2, & V_X>V_{TN}.\n\\end{cases}\n\\]",
        "format": "markdown",
        "sha256": "5eefc9a57a852d0bef8a03e5f0104beb2e2294a38ba7758dcf66af8c46b87231"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the diode connection and gives the NMOS square-law characteristic as an alternative, but misidentifies the actual device as p-channel and presents the wrong characteristic as its main sketch.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1491,
        "output_tokens": 27796,
        "total_tokens": 29287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1491,
        "output_tokens": 27796,
        "total_tokens": 29287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27459,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Because the gate and drain are tied together and the source is grounded,\n\n\\[\nV_{GS}=V_{DS}=V_X .\n\\]\n\nThus \\(M_1\\) is a diode-connected NMOS. Neglecting channel-length modulation and subthreshold current,\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{1}{2}\\mu_n C_{\\text{ox}}\\dfrac WL\\,(V_X-V_{TN})^2,\n& V_X>V_{TN}.\n\\end{cases}\n\\]\n\nSo the \\(I_X\\)-versus-\\(V_X\\) characteristic is zero up to \\(V_{TN}\\), then rises as a parabola with zero slope at \\(V_{TN}\\):\n\n```text\n I_X\n  ^\n  |                              *\n  |                          *\n  |                     __*\n  |                 ___/\n  |__________..---'________________> V_X\n              V_TN\n```\n\nIt resembles a diode characteristic, but the turn-on voltage is \\(V_{TN}\\) and the rising portion is quadratic rather than exponential.",
        "format": "markdown",
        "sha256": "4b000a3bab669cc2a9d4f690d73f4258e79caf5dfc3233622550df23fbba6242"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives zero current up to threshold followed by a quadratic rise above threshold, matching the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1491,
        "output_tokens": 6121,
        "total_tokens": 7612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1491,
        "output_tokens": 6121,
        "total_tokens": 7612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The drain and gate of \\(M_1\\) are tied together, so \\(M_1\\) acts as a **diode-connected NMOS**. Hence\n\n\\[\nV_{GS}=V_{DS}=V_X .\n\\]\n\nFor a long-channel NMOS,\n\n\\[\nI_X \\approx\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{1}{2}\\mu_n C_{\\mathrm{ox}}\\dfrac{W}{L}(V_X-V_{TN})^2,\n& V_X>V_{TN}.\n\\end{cases}\n\\]\n\nThus the \\(I_X\\)-versus-\\(V_X\\) characteristic is zero until the threshold voltage, then rises quadratically:\n\n```text\n I_X\n  ↑                              /\n  |                           _/\n  |                       __/\n  |                   ___/\n  |              ____/\n  |_____________/\n  +-------------|----------------→ V_X\n               V_TN\n```\n\nA practical device would show a small subthreshold current for \\(0<V_X<V_{TN}\\).",
        "format": "markdown",
        "sha256": "caf89dbb047a56eda4ab094987988b545741ba9dc0e3b52c2702d94f6e669132"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current below threshold followed by a quadratic rise above threshold, with subthreshold current noted as a practical effect.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1491,
        "output_tokens": 8520,
        "total_tokens": 10011,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1491,
        "output_tokens": 8520,
        "total_tokens": 10011,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement-mode nMOS with threshold voltage \\(V_T>0\\), its source is at \\(0\\text{ V}\\) and its drain is fixed at \\(1\\text{ V}\\). The arrow \\(I_X\\) is the drain current entering \\(M_1\\).\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[4pt]\n\\dfrac{\\beta}{2}(V_X-V_T)^2,\n& V_T<V_X\\le 1+V_T,\\\\[8pt]\n\\beta\\left(V_X-V_T-\\dfrac12\\right),\n& V_X>1+V_T,\n\\end{cases}\n\\]\n\nwhere \\(\\beta=\\mu_n C_{\\mathrm{ox}}W/L\\).\n\nThus the qualitative sketch is:\n\n```text\n I_X\n  ^\n  |                              /  triode\n  |                           __/\n  |                        .´\n  |                     .´      saturation\n  |                 _.-´\n  |_____________.-´________________________> V_X\n                V_T                 1+V_T\n```\n\n- \\(V_X\\le V_T\\): transistor off.\n- \\(V_T<V_X\\le1+V_T\\): saturation; current rises quadratically.\n- \\(V_X>1+V_T\\): triode region; current rises approximately linearly.\n\nIf \\(V_X\\) is restricted to the usual \\(0\\)–\\(1\\text{ V}\\) range, only the cutoff and quadratic portions are encountered. Numerical values require \\(V_T\\) and \\(\\beta\\).",
        "format": "markdown",
        "sha256": "f9302d021714d39383b4cd35cd2dc26599823c15f0f75fff491709fd1b1c290b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current up to V_X=V_T+1 V, and approximately linear triode current beyond that, with the appropriate piecewise equations.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1644,
        "output_tokens": 6178,
        "total_tokens": 7822,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1644,
        "output_tokens": 6178,
        "total_tokens": 7822,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement nMOS and using the square-law model,\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1~\\text{V}.\n\\]\n\nLet \\(\\beta_n=\\mu_n C_{\\mathrm{ox}}(W/L)\\) and let \\(V_{TN}\\) be the threshold voltage. Then\n\n\\[\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TN},\\\\[4pt]\n\\dfrac{\\beta_n}{2}(V_X-V_{TN})^2,\n& V_{TN}<V_X\\le V_{TN}+1,\\\\[8pt]\n\\beta_n\\left[(V_X-V_{TN})(1)-\\dfrac12(1)^2\\right],\n& V_X>V_{TN}+1.\n\\end{cases}\n\\]\n\nThus:\n\n- \\(V_X\\le V_{TN}\\): cutoff.\n- \\(V_{TN}<V_X\\le V_{TN}+1\\): saturation.\n- \\(V_X>V_{TN}+1\\): triode/ohmic.\n\n```text\n I_X\n  ^\n  |                                           /  triode\n  |                                       ___/\n  |                                   ___/\n  |                               ___/     saturation\n  |                           ___/\n  |                       ___/\n  |______________________/\n  +----------------------|---------------|------> V_X\n                        V_TN          V_TN+1\n```\n\nIf \\(V_X\\) is restricted to the usual range \\(0\\le V_X\\le1~\\text{V}\\), only the cutoff and saturation portions are encountered, and\n\n\\[\nI_X(1~\\text{V})=\\frac{\\beta_n}{2}(1-V_{TN})^2.\n\\]",
        "format": "markdown",
        "sha256": "aeab609c07456038181b9e71aa01c276fb7a521c67e26e891e352af041069b3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current through VX = VTN + 1 V, and a roughly linear triode-region rise beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1643,
        "input_tokens": 1644,
        "output_tokens": 7783,
        "total_tokens": 9427,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1643,
        "input_tokens": 1644,
        "output_tokens": 7783,
        "total_tokens": 9427,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an enhancement-mode NMOS operating in the square-law region, with source and body grounded,\n\n\\[\nV_{GS}=V_X,\\qquad V_{DS}=1\\,\\text{V}.\n\\]\n\nLet \\(V_T\\) be the threshold voltage and \\(k_n=\\mu_n C_{\\text{ox}}W/L\\).\n\n### Regions of operation\n\n\\[\nI_X(V_X)=\n\\begin{cases}\n0, & V_X\\le V_T,\\\\[4pt]\n\\dfrac{k_n}{2}(V_X-V_T)^2,\n& V_T<V_X\\le V_T+1\\,\\text{V},\\\\[8pt]\nk_n\\left[(V_X-V_T)(1\\,\\text{V})-\\dfrac{(1\\,\\text{V})^2}{2}\\right],\n& V_X>V_T+1\\,\\text{V}.\n\\end{cases}\n\\]\n\nThus:\n\n- **Cutoff:** \\(V_X\\le V_T\\), so \\(I_X=0\\).\n- **Saturation:** \\(V_T<V_X\\le V_T+1\\,\\text{V}\\); current rises quadratically.\n- **Triode:** \\(V_X>V_T+1\\,\\text{V}\\); current continues rising approximately linearly.\n\n```text\n I_X\n  ^\n  |                              /\n  |                            /     triode\n  |                         ●\n  |                      __/\n  |                  ___/        saturation\n  |              ____/\n  |_____________/\n  +-------------|-------------|------------> V_X\n               V_T         V_T+1 V\n```\n\nIf \\(V_T=1\\,\\text{V}\\), the breakpoints are \\(V_X=1\\,\\text{V}\\) and \\(V_X=2\\,\\text{V}\\). For a depletion-mode NMOS, the same construction applies with its negative threshold voltage.",
        "format": "markdown",
        "sha256": "45ce0df3dc3458cd97df26674051c2f7fd5a290782f1f7056761119779938b3a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives zero current below threshold, a quadratic rise in saturation up to VTH + 1 V, and an approximately linear rise in triode beyond that point, with the corresponding equations and sketch.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1643,
        "input_tokens": 1644,
        "output_tokens": 11126,
        "total_tokens": 12770,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1643,
        "input_tokens": 1644,
        "output_tokens": 11126,
        "total_tokens": 12770,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "A MOSFET can be used as a current source, but **\\(M_1\\) is not an independent current source as connected**.\n\nThe symbol shows a p-channel MOSFET with its gate and drain grounded. If the upper source-node voltage is \\(v_X\\), then\n\n\\[\nV_{SG}=v_X\n\\]\n\nso the transistor current depends directly on \\(v_X\\). Ignoring body effects and the source-body diode, an ideal enhancement pMOS would have approximately\n\n\\[\nI_X =\n\\begin{cases}\n0, & v_X\\le |V_{TP}|,\\\\[4pt]\n\\dfrac{\\beta}{2}(v_X-|V_{TP}|)^2, & v_X>|V_{TP}|.\n\\end{cases}\n\\]\n\nThus, if an external circuit forces \\(I_X\\), the source-node voltage simply changes until the transistor conducts that current. \\(M_1\\) is not regulating the current; it is acting roughly as a **diode-connected, nonlinear current sink**.\n\nTo use a MOSFET as a proper current source:\n\n- keep its \\(V_{GS}\\) or \\(V_{SG}\\) at a fixed bias,\n- keep the drain in the saturation region, and\n- preferably use a current-mirror arrangement.\n\nAlso, in a real discrete pMOS, the source-body junction must not be forward-biased; the shown grounding may require special attention.",
        "format": "markdown",
        "sha256": "dd2a62412dcdaa66fa6cbdbbb22e4f89e91d4f95c9f40e01a71ad244595f947b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the PMOS and its diode-connected terminals, and explains why its current varies with voltage rather than being regulated. It does not state the key low small-signal impedance (about 1/gm), so it falls short of the full-credit requirement.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 768,
        "output_tokens": 12893,
        "total_tokens": 13661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 768,
        "output_tokens": 12893,
        "total_tokens": 13661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an **enhancement-mode NMOS**, **not as shown**. Both its gate and source are grounded, so\n\n\\[\nV_{GS}=0<V_{TH},\n\\]\n\nand the transistor is cut off. Thus \\(I_X\\approx 0\\) except for leakage.\n\nAn NMOS can act as a current source when:\n\n- \\(V_{GS}>V_{TH}\\), and\n- the drain voltage is high enough for saturation:\n  \\[\n  V_{DS}\\ge V_{GS}-V_{TH}.\n  \\]\n\nIn saturation,\n\n\\[\nI_X \\approx \\frac{1}{2}k_n(V_{GS}-V_{TH})^2,\n\\]\n\nwhich is approximately independent of \\(V_{DS}\\).\n\nA depletion-mode NMOS is an exception: it can conduct with \\(V_{GS}=0\\), although its current is then set by its zero-bias drain current.",
        "format": "markdown",
        "sha256": "6216f6c9937ae931c9c61caa645ce58ee2e563f5a1dfabcda51d1481347c67af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and concludes it is off with VGS=0. In the figure M1 is a diode-connected PMOS, which presents low impedance and cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 768,
        "output_tokens": 1698,
        "total_tokens": 2466,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 512,
        "input_tokens": 768,
        "output_tokens": 1698,
        "total_tokens": 2466,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1511,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "It depends on the MOSFET type.\n\nWith the gate and source both grounded,\n\n\\[\nV_{GS}=0.\n\\]\n\n- **Enhancement-mode NMOS (\\(V_T>0\\))**: \\(V_{GS}<V_T\\), so \\(M_1\\) is cut off and \\(I_X\\approx0\\) (apart from leakage). It cannot provide a useful current.\n- **Depletion-mode NMOS (\\(V_T<0\\))**: it remains on at \\(V_{GS}=0\\). For \\(V_{DS}\\ge -V_T\\), it is in saturation and\n\n\\[\nI_X \\approx \\frac{1}{2}k_n\\frac WL V_T^2 = I_{DSS},\n\\]\n\nwhich is nearly independent of \\(V_{DS}\\). Thus it can act as a **practical current sink**, though with finite output resistance and limited compliance.\n\nSo, **yes if \\(M_1\\) is depletion-mode; no if it is an ordinary enhancement-mode NMOS**.",
        "format": "markdown",
        "sha256": "46115c80f3603e32acf60149776c5a6b656d47e03170244f1ed8d343ac227510"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads the drawn PMOS diode connection as a grounded-source NMOS and bases its answer on that incorrect topology. The actual device presents a low impedance, about 1/gm, and cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 768,
        "output_tokens": 20388,
        "total_tokens": 21156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 768,
        "output_tokens": 20388,
        "total_tokens": 21156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe device symbol indicates a **p-channel MOSFET (pMOS)**. Its source is the upper terminal and its drain is the lower terminal. Therefore, the dc current path is\n\n\\[\nV_{DD}\\rightarrow R_S\\rightarrow M_1\\rightarrow R_D\\rightarrow \\text{ground}.\n\\]\n\nThis is a **source-degenerated common-source pMOS stage**:\n\n- \\(R_S\\): source degeneration; it also establishes the dc source voltage.\n- \\(R_D\\): drain load to ground.\n- Output: taken at the drain, \\(V_{\\text{out}}=V_D\\).\n- Input: applied to the MOS gate.\n\nBecause \\(V_{DD}\\) is an ac ground, \\(R_S\\) is seen by the transistor as a source resistor to ground during small-signal analysis.\n\n---\n\n## 2. DC operating point\n\nLet\n\n- \\(V_{TP}=|V_{TH,p}|\\),\n- \\(\\beta_p=\\mu_p C_{\\text{ox}}(W/L)\\),\n- \\(I_Q\\) be the dc drain current.\n\nThe dc node voltages are\n\n\\[\nV_S=V_{DD}-I_Q R_S,\n\\]\n\n\\[\nV_{\\text{out}}=V_D=I_QR_D,\n\\]\n\nand\n\n\\[\nV_{SG}=V_S-V_{\\text{in}}\n      =V_{DD}-I_QR_S-V_{\\text{in}}.\n\\]\n\nIf \\(M_1\\) operates in saturation and channel-length modulation is neglected,\n\n\\[\nI_Q=\\frac{\\beta_p}{2}\\left(V_{SG}-V_{TP}\\right)^2\n=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{in}}-I_QR_S-V_{TP}\\right)^2.\n\\]\n\nFor \\(\\lambda=0\\), define\n\n\\[\nA=V_{DD}-V_{\\text{in}}-V_{TP}.\n\\]\n\nThe positive solution is\n\n\\[\nI_Q=\n\\left[\n\\frac{\n\\sqrt{2/\\beta_p+4R_SA}-\\sqrt{2/\\beta_p}\n}{2R_S}\n\\right]^2,\n\\qquad\nV_{\\text{out},Q}=I_QR_D.\n\\]\n\nIf \\(R_S=0\\), this reduces to\n\n\\[\nI_Q=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{in}}-V_{TP}\\right)^2.\n\\]\n\n### Region checks\n\nThe source-to-drain voltage is\n\n\\[\nV_{SD}=V_{DD}-I_Q(R_S+R_D).\n\\]\n\n- **Cutoff:** \\(V_{SG}\\le V_{TP}\\)\n- **Saturation:** \\(V_{SG}>V_{TP}\\) and \\(V_{SD}\\ge V_{SG}-V_{TP}\\)\n- **Triode:** \\(V_{SG}>V_{TP}\\) and \\(0<V_{SD}<V_{SG}-V_{TP}\\)\n\nIn triode,\n\n\\[\nI_Q=\\beta_p\\left[(V_{SG}-V_{TP})V_{SD}-\\frac{V_{SD}^2}{2}\\right].\n\\]\n\nThere is no separate bias network in the drawing, so \\(V_{\\text{in}}\\) must include the required dc bias voltage.\n\n---\n\n## 3. Small-signal voltage gain\n\nAt midband, \\(V_{DD}\\) is ac ground. Define positive magnitudes\n\n\\[\ng_m=\\beta_p(V_{SG,Q}-V_{TP}),\\qquad\ng_o=\\frac{1}{r_o}\\simeq \\lambda I_Q.\n\\]\n\nWith no external load, the low-frequency gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_mR_D}\n{1+g_mR_S+g_o(R_S+R_D)}\n}\n\\]\n\nIgnoring \\(r_o\\),\n\n\\[\n\\boxed{\nA_v\\simeq-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nThus the stage is **inverting**:\n\n\\[\nV_{\\text{in}}\\uparrow\n\\;\\Rightarrow\\;\nV_{SG}\\downarrow\n\\;\\Rightarrow\\;\nI_D\\downarrow\n\\;\\Rightarrow\\;\nV_{\\text{out}}\\downarrow.\n\\]\n\nThe source degeneration reduces the effective transconductance to approximately\n\n\\[\ng_{m,\\text{eff}}=\\frac{g_m}{1+g_mR_S}.\n\\]\n\n---\n\n## 4. Input and output resistances\n\nBecause the MOS gate draws essentially no current,\n\n\\[\n\\boxed{R_{\\text{in}}\\rightarrow\\infty}\n\\]\n\napart from gate leakage and capacitive effects.\n\nWith the input set to ac ground, the resistance looking into the drain is approximately\n\n\\[\nr_{\\text{out,stage}}=r_o+R_S(1+g_mr_o).\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\nR_D\\parallel\n\\left[r_o+R_S(1+g_mr_o)\\right]\n}\n\\]\n\nand for \\(\\lambda=0\\), \\(R_{\\text{out}}\\approx R_D\\).\n\n---\n\n## 5. Large-signal behavior\n\nThe transfer characteristic is\n\n\\[\nV_{\\text{out}}(V_{\\text{in}})\n=\nR_D I_D(V_{\\text{in}}),\n\\]\n\nand it decreases as \\(V_{\\text{in}}\\) increases.\n\n- At cutoff, \\(I_D=0\\), so \\(V_{\\text{out}}=0\\).\n- The maximum possible current is limited by the two resistors:\n\n\\[\nI_D\\le \\frac{V_{DD}}{R_S+R_D},\n\\]\n\nhence\n\n\\[\nV_{\\text{out}}\\le\n\\frac{V_{DD}R_D}{R_S+R_D}.\n\\]\n\nThe practical maximum may be lower depending on the available gate-source overdrive and whether the transistor enters triode.\n\n## Summary\n\nThis is a **source-degenerated, common-source pMOS amplifier**. Its key results are\n\n\\[\nA_v\\simeq-\\frac{g_mR_D}{1+g_mR_S},\n\\qquad\nR_{\\text{in}}\\text{ is very high},\n\\]\n\n\\[\nR_{\\text{out}}\n\\simeq\nR_D\\parallel\\left[r_o+R_S(1+g_mr_o)\\right].\n\\]\n\nA numerical bias point and gain require \\(V_{DD}\\), \\(R_S\\), \\(R_D\\), \\(V_{\\text{in},Q}\\), \\(V_{TP}\\), \\(\\beta_p\\), and \\(\\lambda\\).",
        "format": "markdown",
        "sha256": "c159ae774418aac786d96f116f0031b2bcb2257b28349c9c5167965a25f095e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS source-degenerated common-source stage and gives the inverting gain \u0002-g_mR_D/(1+g_mR_S)\u0002; the additional analysis is consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1748,
        "output_tokens": 19281,
        "total_tokens": 21029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1748,
        "output_tokens": 19281,
        "total_tokens": 21029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe upper, arrowed terminal is the **source**, and the lower terminal is the **drain**. Since the source is connected toward \\(V_{DD}\\) and the drain toward ground through \\(R_D\\), \\(M_1\\) is most reasonably interpreted as a **p-channel MOSFET**.\n\nThis is a **common-source amplifier with source degeneration**:\n\n- Input: gate, \\(v_{in}\\)\n- Output: drain, \\(v_{out}\\)\n- \\(R_S\\): source-bias and degeneration resistor\n- \\(R_D\\): drain load\n- \\(V_{DD}\\) is AC ground\n\nIt is not a common-gate stage; a common-gate amplifier would have the signal applied to the source and the gate held at AC ground.\n\nA DC gate bias \\(V_{G,Q}\\) is also required. If \\(V_{in}\\) is purely a zero-mean AC signal, a separate gate-bias network is missing from the drawing.\n\n---\n\n## 2. DC bias\n\nThe dc current path is\n\n\\[\nV_{DD}\\rightarrow R_S\\rightarrow M_1\\rightarrow R_D\\rightarrow \\text{ground}.\n\\]\n\nLet\n\n\\[\nV_T=|V_{TH,p}|,\\qquad\nV_{OV}=V_{SG}-V_T,\n\\qquad\n\\beta_p=\\frac{1}{2}\\mu_p C_{ox}\\frac WL .\n\\]\n\nAssuming saturation and neglecting channel-length modulation,\n\n\\[\nI_D=\\beta_p V_{OV}^2.\n\\]\n\nThe resistor voltages are\n\n\\[\nV_S=V_{DD}-I_D R_S,\n\\qquad\nV_D=I_D R_D.\n\\]\n\nHence, with gate dc voltage \\(V_{G,Q}\\),\n\n\\[\nV_{OV}=V_{DD}-V_{G,Q}-V_T-I_D R_S,\n\\]\n\nand the bias current satisfies\n\n\\[\n\\boxed{\nI_{DQ}=\n\\beta_p\n\\left(\nV_{DD}-V_{G,Q}-V_T-I_{DQ}R_S\n\\right)^2\n}\n\\]\n\nwhich can be solved numerically or analytically. Defining\n\n\\[\nA=V_{DD}-V_{G,Q}-V_T,\n\\]\n\nthe positive solution is\n\n\\[\n\\sqrt{I_{DQ}}\n=\n\\frac{\\sqrt{1+4\\beta_pR_SA}-1}\n     {2R_S\\sqrt{\\beta_p}}.\n\\]\n\nThe pMOS must satisfy the saturation condition\n\n\\[\n\\boxed{V_{SD}\\ge V_{SG}-V_T}\n\\]\n\nor, equivalently,\n\n\\[\nV_D\\le V_G+V_T.\n\\]\n\nIf this condition is violated, \\(M_1\\) is in the triode region.\n\n---\n\n## 3. Small-signal voltage gain\n\nDefine\n\n\\[\ng_m=2\\beta_pV_{OV}=\\frac{2I_D}{V_{OV}},\n\\qquad\nr_o=\\frac{1}{\\lambda I_D}.\n\\]\n\nBecause \\(V_{DD}\\) is AC ground, \\(R_S\\) appears from the source to AC ground. Ignoring \\(r_o\\), the source follows the gate partially:\n\n\\[\nv_s=\\frac{g_mR_S}{1+g_mR_S}v_{in},\n\\]\n\nso that\n\n\\[\nv_{gs}=v_{in}-v_s\n=\\frac{v_{in}}{1+g_mR_S}.\n\\]\n\nFor a pMOS, an increase in gate voltage reduces the source-to-gate voltage and therefore reduces the drain current. Consequently, the stage is inverting:\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n\\simeq\n-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\nwhen \\(r_o\\) is neglected.\n\nWith finite \\(r_o\\) included, nodal analysis gives\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_Dr_o}\n{r_o(1+g_mR_S)+R_S+R_D}\n}\n\\]\n\nwhich reduces to the preceding expression for \\(r_o\\to\\infty\\).\n\nUseful limiting cases are\n\n\\[\nR_S=0:\n\\qquad\nA_v=-g_m(R_D\\parallel r_o),\n\\]\n\nand for strong degeneration \\(g_mR_S\\gg1\\),\n\n\\[\nA_v\\approx-\\frac{R_D}{R_S}.\n\\]\n\n---\n\n## 4. Input and output resistance\n\nBecause the MOSFET gate draws essentially no current,\n\n\\[\n\\boxed{R_{in}\\rightarrow\\infty}\n\\]\n\nexcept for gate leakage and capacitances.\n\nLooking back into the drain with the gate at AC ground, the amplifier output resistance is approximately\n\n\\[\nR_{out,M1}=r_o+R_S(1+g_mr_o).\n\\]\n\nIncluding \\(R_D\\),\n\n\\[\n\\boxed{\nR_{out}\n=\nR_D\\parallel\n\\left[r_o+R_S(1+g_mr_o)\\right]\n}\n\\]\n\nThus source degeneration increases output resistance while reducing gain and improving linearity.\n\n---\n\n## 5. Main conclusions\n\n- The stage is a **p-channel common-source amplifier with source degeneration**.\n- It provides a voltage gain that is negative, i.e. a \\(180^\\circ\\) phase reversal.\n- \\(R_S\\) establishes the dc bias and provides negative feedback.\n- The input impedance is very high.\n- The output impedance is increased by \\(R_S\\).\n- The source degeneration reduces gain but improves gain stability and linearity.\n- A gate dc-bias network must be added or included in \\(V_{in}\\).\n\nIf \\(M_1\\) was intended to be an **n-channel** MOSFET, the source/drain polarities in the drawing are reversed: an nMOS source should normally be connected toward ground through \\(R_S\\), while its drain should be connected toward \\(V_{DD}\\) through \\(R_D\\).",
        "format": "markdown",
        "sha256": "553ae146e7fd6d67a38dfccca7cb6b2f9fc3135931f3246e1658261e1a226227"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the required inverting gain; the additional analysis is consistent with the topology.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1747,
        "input_tokens": 1748,
        "output_tokens": 23811,
        "total_tokens": 25559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22668,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1747,
        "input_tokens": 1748,
        "output_tokens": 23811,
        "total_tokens": 25559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22668,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe source arrow and the \\(R_S/R_D\\) labeling indicate that \\(M_1\\) is a **p-channel MOSFET**. The stage is a **common-source amplifier with source degeneration**:\n\n- Input: gate voltage \\(V_{\\text{in}}\\)\n- Output: drain voltage \\(V_{\\text{out}}\\)\n- \\(R_S\\): source-degeneration resistor\n- \\(R_D\\): drain load resistor\n- \\(V_{DD}\\): supply\n- \\(R_S\\) is not bypassed, so it provides degeneration over the full signal bandwidth.\n\nBecause no component values are given, the results can only be stated symbolically.\n\n---\n\n## 2. DC bias\n\nLet the quiescent gate voltage be\n\n\\[\nV_{GQ}\\equiv V_{\\text{in,Q}},\n\\]\n\nand let the magnitude of the PMOS threshold voltage be \\(|V_{TP}|\\).\n\nSince the MOSFET gate draws negligible current, the DC current is\n\n\\[\nI_{DQ}=I_{S}=I_D.\n\\]\n\nTherefore,\n\n\\[\nV_{SQ}=V_{DD}-I_{DQ}R_S,\n\\]\n\n\\[\nV_{DQ}=V_{out,Q}=I_{DQ}R_D,\n\\]\n\nand the source-to-gate voltage is\n\n\\[\nV_{SGQ}=V_{DD}-I_{DQ}R_S-V_{GQ}.\n\\]\n\nAssuming saturation and defining\n\n\\[\nk_p=\\mu_p C_{\\text{ox}}\\frac WL,\n\\]\n\nthe PMOS current is\n\n\\[\nI_{DQ}=\\frac{k_p}{2}\n\\left(V_{SGQ}-|V_{TP}|\\right)^2.\n\\]\n\nThus \\(I_{DQ}\\) satisfies\n\n\\[\n\\boxed{\nI_{DQ}=\n\\frac{k_p}{2}\n\\left[\nV_{DD}-V_{GQ}-|V_{TP}|-I_{DQ}R_S\n\\right]^2\n}\n\\]\n\nand the quiescent output is\n\n\\[\n\\boxed{V_{\\text{out},Q}=I_{DQ}R_D}.\n\\]\n\nFor \\(R_S>0\\), define\n\n\\[\n\\Delta=V_{DD}-V_{GQ}-|V_{TP}|.\n\\]\n\nAn explicit saturation-current solution is\n\n\\[\nI_{DQ}=\n\\left[\n\\frac{\n\\sqrt{\\frac{2}{k_p}+4R_S\\Delta}\n-\\sqrt{\\frac{2}{k_p}}\n}{2R_S}\n\\right]^2.\n\\]\n\n### Saturation requirement\n\nThe PMOS must satisfy\n\n\\[\nV_{SQ}-V_{DQ}\\geq V_{SGQ}-|V_{TP}|,\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{I_{DQ}R_D\\leq V_{GQ}+|V_{TP}|}.\n\\]\n\nAlso, the overdrive voltage\n\n\\[\nV_{OV}=V_{SGQ}-|V_{TP}|\n\\]\n\nmust be positive.\n\n---\n\n## 3. Small-signal voltage gain\n\nFor AC analysis, \\(V_{DD}\\) is ground, so \\(R_S\\) connects the source to AC ground. Neglecting \\(r_o\\), define\n\n\\[\ng_m=k_pV_{OV}.\n\\]\n\nBecause \\(M_1\\) is a PMOS, its small-signal source-to-drain current can be written as\n\n\\[\ni_d=g_m(v_s-v_g).\n\\]\n\nKCL at the source gives\n\n\\[\n\\frac{v_s}{R_S}+g_m(v_s-v_g)=0,\n\\]\n\nso\n\n\\[\nv_s=\\frac{g_mR_S}{1+g_mR_S}v_g.\n\\]\n\nAt the drain,\n\n\\[\nv_o=R_Di_d,\n\\]\n\nwhich gives the midband voltage gain\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_g}\n\\approx-\\frac{g_mR_D}{1+g_mR_S}\n}.\n\\]\n\nThe stage is **inverting**:\n\n- Increasing \\(V_{\\text{in}}\\) reduces \\(V_{SG}\\).\n- The PMOS current decreases.\n- The drop across \\(R_D\\) decreases.\n- Therefore \\(V_{\\text{out}}\\) decreases.\n\nFor large \\(g_mR_S\\),\n\n\\[\n|A_v|\\approx\\frac{R_D}{R_S}.\n\\]\n\nIf the transistor output resistance \\(r_o\\) is retained, the low-frequency gain becomes approximately\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_mR_D}\n{1+g_mR_S+\\dfrac{R_S+R_D}{r_o}}\n}.\n\\]\n\nA load \\(R_L\\), if connected to the output, replaces \\(R_D\\) by \\(R_D\\parallel R_L\\) in the gain expression.\n\n---\n\n## 4. Input and output resistances\n\n### Input resistance\n\nBecause the input is connected to the MOSFET gate,\n\n\\[\n\\boxed{R_{\\text{in}}\\rightarrow\\infty}\n\\]\n\napart from gate leakage and any bias network connected to the gate.\n\n### Output resistance\n\nLooking back into the drain with the input set to zero,\n\n\\[\n\\boxed{\nR_{\\text{out}}\n\\approx\nR_D\\parallel\n\\left[r_o+R_S(1+g_mr_o)\\right]\n}\n\\]\n\nand for \\(r_o\\rightarrow\\infty\\),\n\n\\[\n\\boxed{R_{\\text{out}}\\approx R_D}.\n\\]\n\n---\n\n## 5. Effect of source degeneration\n\nThe unbypassed \\(R_S\\):\n\n- Reduces the voltage gain.\n- Improves gain linearity.\n- Increases the output resistance.\n- Reduces the Miller multiplication of \\(C_{gd}\\).\n- Stabilizes the drain current because an increase in current raises \\(V_S\\), thereby reducing \\(V_{SG}\\).\n\nThe approximate input capacitance is\n\n\\[\nC_{\\text{in}}\\approx C_{gs}+C_{gd}(1-A_v),\n\\]\n\nwhich is smaller than in an undegenerated common-source stage because \\(A_v<0\\).\n\n---\n\n## Summary\n\n\\[\n\\boxed{\\text{\\(M_1\\) is a p-channel common-source amplifier with source degeneration.}}\n\\]\n\nIts principal results are\n\n\\[\n\\boxed{\nV_{\\text{out},Q}=I_{DQ}R_D\n}\n\\]\n\n\\[\n\\boxed{\nA_v\\approx-\\frac{g_mR_D}{1+g_mR_S}\n}\n\\]\n\n\\[\n\\boxed{R_{\\text{in}}\\rightarrow\\infty,\\qquad\nR_{\\text{out}}\\approx R_D}\n\\]\n\nwith the DC operating point obtained from the PMOS square-law equation and the saturation condition checked explicitly.",
        "format": "markdown",
        "sha256": "81193618a3192456d60ab2b5f1497b028d448f8875d10bc2366c0dcc74222e48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), satisfying the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1747,
        "input_tokens": 1748,
        "output_tokens": 15609,
        "total_tokens": 17357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1747,
        "input_tokens": 1748,
        "output_tokens": 15609,
        "total_tokens": 17357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14346,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nAssuming \\(M_1\\) is an NMOS, this is an **NMOS source follower**, also called a **common-drain amplifier**:\n\n- Drain: connected to \\(V_{DD}\\), which is AC ground.\n- Gate: driven by \\(V_{in}\\).\n- Source: connected to \\(V_{out}\\).\n- \\(R_S\\): source load and DC bias resistor.\n\nThe source follower provides voltage gain slightly less than unity and has low output resistance.\n\n---\n\n## 2. DC operating point\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac WL,\n\\qquad\nI_D=\\frac{\\beta_n}{2}V_{OV}^2\n\\]\n\nwhere\n\n\\[\nV_{OV}=V_{GS}-V_T=V_{in}-V_T-V_{out}.\n\\]\n\nSince the same current flows through \\(M_1\\) and \\(R_S\\),\n\n\\[\nV_{out}=I_D R_S.\n\\]\n\nThus, neglecting channel-length modulation and body effect,\n\n\\[\n\\boxed{\nI_D=\\frac{\\beta_n}{2}\n\\left(V_{in}-V_T-V_{out}\\right)^2,\n\\qquad\nV_{out}=I_D R_S\n}\n\\]\n\nThese equations must be solved for the desired \\(V_{in}\\).\n\nFor a specified drain current \\(I_Q\\),\n\n\\[\n\\boxed{\nV_{in,Q}=V_T+\\sqrt{\\frac{2I_Q}{\\beta_n}}+I_Q R_S\n}\n\\]\n\nand\n\n\\[\nV_{out,Q}=I_Q R_S.\n\\]\n\nAn explicit form can also be obtained. Define\n\n\\[\nA=V_{in}-V_T,\\qquad q=\\beta_nR_S.\n\\]\n\nThen\n\n\\[\n\\boxed{\nV_{out}\n=\n\\frac{qA+1-\\sqrt{1+2qA}}{q}\n}\n\\]\n\nfor \\(V_{in}>V_T\\).\n\nIf \\(V_{in}\\leq V_T\\), \\(M_1\\) is cut off and \\(V_{out}=0\\).\n\n### Important biasing note\n\nThere is no gate-bias resistor in the circuit. Therefore, the source driving \\(V_{in}\\) must provide the required DC gate voltage. If \\(V_{in}\\) is AC-coupled to zero volts, \\(M_1\\) will be cut off and the stage will not amplify a symmetric signal.\n\n---\n\n## 3. Small-signal voltage gain\n\nAt midband, \\(V_{DD}\\) is AC ground. Neglecting body effect, the source-node equation is\n\n\\[\ng_m(v_{in}-v_{out})=\\frac{v_{out}}{R_S}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_mR_S}{1+g_mR_S}\n}\n\\]\n\nwhere\n\n\\[\ng_m=\\beta_n V_{OV}.\n\\]\n\nThe gain is:\n\n- Positive, so the output is not inverted.\n- Less than one.\n- Approaches one when \\(g_mR_S\\gg 1\\).\n\nIf the transistor output resistance \\(r_o\\) is included,\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m}\n{g_m+\\dfrac{1}{r_o}+\\dfrac{1}{R_S}}\n=\n\\frac{g_m(r_o\\parallel R_S)}\n{1+g_m(r_o\\parallel R_S)}\n}\n\\]\n\nwith approximately\n\n\\[\nr_o\\simeq \\frac{1}{\\lambda I_Q}.\n\\]\n\nIf the substrate is grounded and body effect is significant, define\n\n\\[\ng_{mb}=g_m\\frac{\\partial V_T}{\\partial V_S},\n\\]\n\nand use\n\n\\[\nA_v=\n\\frac{g_m}\n{g_m+g_{mb}+1/r_o+1/R_S}.\n\\]\n\n---\n\n## 4. Input and output resistance\n\nAt low frequency, the MOSFET gate draws essentially no current:\n\n\\[\n\\boxed{R_{in}\\rightarrow\\infty}\n\\]\n\nThe total output resistance, with the input source set to zero, is approximately\n\n\\[\n\\boxed{\nR_{out}=R_S\\parallel \\frac{1}{g_m+1/r_o}\n}\n\\]\n\nor, with body effect,\n\n\\[\nR_{out}=R_S\\parallel \\frac{1}{g_m+g_{mb}+1/r_o}.\n\\]\n\nThus, the source follower presents a relatively low output resistance.\n\n---\n\n## 5. Operating limits\n\nFor saturation,\n\n\\[\nV_{DS}\\geq V_{GS}-V_T.\n\\]\n\nSince \\(V_{DS}=V_{DD}-V_{out}\\),\n\n\\[\n\\boxed{V_{in}\\leq V_{DD}+V_T}\n\\]\n\nis the saturation condition. If \\(V_{in}>V_{DD}+V_T\\), \\(M_1\\) enters the triode region and the output begins to compress near \\(V_{DD}\\).\n\nIn saturation,\n\n\\[\nV_{out}=V_{in}-V_T-V_{OV},\n\\]\n\nso the output follows the input but is offset downward by approximately the threshold voltage plus the overdrive voltage. The output cannot normally exceed \\(V_{DD}\\), and the usable range is also limited by cutoff and saturation headroom.\n\nIn summary, the circuit is a **noninverting, near-unity-gain, self-biased NMOS source follower**, with the main limitations being the need for a proper gate DC bias and sufficient supply/headroom.",
        "format": "markdown",
        "sha256": "304019c1f17ccd04551fa1e89ad08f4f2c94bf72d7d3f4fbbe40e5b8d173cf83"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the NMOS source follower and gives its positive, less-than-unity gain, gmRS/(1+gmRS). The additional output-resistance and operating-point discussion is consistent with the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 198,
        "input_tokens": 1452,
        "output_tokens": 21222,
        "total_tokens": 22674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20139,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 198,
        "input_tokens": 1452,
        "output_tokens": 21222,
        "total_tokens": 22674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20139,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\n\\(M_1\\) is an NMOS with:\n\n- Drain connected to \\(V_{DD}\\)\n- Gate driven by \\(V_{in}\\)\n- Source connected to \\(V_{out}\\)\n- \\(R_S\\) connected from \\(V_{out}\\) to ground\n\nThis is a **common-drain amplifier**, or **source follower**, with source degeneration/load \\(R_S\\). It is a noninverting buffer with high input impedance and relatively low output impedance.\n\n---\n\n## 2. DC operating point\n\nThe input must provide a DC bias voltage; otherwise, with \\(V_{in}=0\\), an enhancement NMOS would normally be off.\n\nFor a square-law MOSFET in saturation,\n\n\\[\nI_D=\\frac{k_n}{2}(V_{GS}-V_T)^2,\n\\qquad\nk_n=\\mu_n C_{ox}\\frac WL\n\\]\n\nand\n\n\\[\nV_{GS}=V_{in,Q}-V_{out,Q},\n\\qquad\nV_{out,Q}=I_{DQ}R_S.\n\\]\n\nTherefore,\n\n\\[\nI_{DQ}=\\frac{k_n}{2}\n\\left(V_{in,Q}-I_{DQ}R_S-V_T\\right)^2.\n\\]\n\nDefining the overdrive voltage \\(V_{OV}=V_{GS}-V_T\\),\n\n\\[\nI_{DQ}=\\frac{k_n}{2}V_{OV}^2,\n\\]\n\nand the bias voltage must satisfy\n\n\\[\nV_{in,Q}=V_T+V_{OV}+I_{DQ}R_S.\n\\]\n\nAn explicit solution is obtained from\n\n\\[\n\\frac{k_nR_S}{2}V_{OV}^2+V_{OV}\n-(V_{in,Q}-V_T)=0,\n\\]\n\ngiving\n\n\\[\nV_{OV}=\n\\frac{\\sqrt{1+2k_nR_S(V_{in,Q}-V_T)}-1}{k_nR_S}.\n\\]\n\nThe transistor must remain in saturation:\n\n\\[\nV_{DSQ}=V_{DD}-I_{DQ}R_S\n\\geq V_{OV}.\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) is an AC ground. Neglecting body effect and channel-length modulation,\n\n\\[\ni_d=g_m(v_i-v_o),\n\\qquad\ni_d=\\frac{v_o}{R_S}.\n\\]\n\nThus,\n\n\\[\ng_m(v_i-v_o)=\\frac{v_o}{R_S},\n\\]\n\nand the voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\\frac{g_mR_S}{1+g_mR_S}\n}\n\\]\n\nwhere\n\n\\[\ng_m=\\sqrt{2k_nI_{DQ}}\n=\\frac{2I_{DQ}}{V_{OV}}.\n\\]\n\nHence:\n\n- \\(0<A_v<1\\)\n- The output is in phase with the input.\n- If \\(g_mR_S\\gg1\\), then \\(A_v\\approx1\\).\n- If \\(g_mR_S=1\\), then \\(A_v=0.5\\).\n\nThe resistor produces negative feedback: if \\(I_D\\) increases, \\(V_{out}\\) increases, reducing \\(V_{GS}\\) and opposing the original change.\n\n### Including body effect and finite output resistance\n\nIf the NMOS body is grounded and its transconductance is \\(g_{mb}\\), and \\(g_o=1/r_o\\), then\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m}\n{g_m+g_{mb}+g_o+\\dfrac{1}{R_S}}\n}\n\\]\n\nor, neglecting \\(g_o\\),\n\n\\[\nA_v=\\frac{g_mR_S}\n{1+(g_m+g_{mb})R_S}.\n\\]\n\nIf a load \\(R_L\\) is connected from \\(V_{out}\\) to ground, replace \\(R_S\\) by \\(R_S\\parallel R_L\\) in the usual approximations.\n\n---\n\n## 4. Input and output resistance\n\n### Input resistance\n\nBecause the input is applied to the MOS gate,\n\n\\[\n\\boxed{R_{in}\\rightarrow\\infty}\n\\]\n\napart from biasing circuitry and input capacitances.\n\n### Output resistance\n\nWith the input source set to zero,\n\n\\[\n\\boxed{\nR_{out}\n=\n\\left(\ng_m+g_{mb}+g_o+\\frac{1}{R_S}\n\\right)^{-1}\n}\n\\]\n\nor equivalently,\n\n\\[\nR_{out}=R_S\\parallel\n\\frac{1}{g_m+g_{mb}+g_o}.\n\\]\n\nNeglecting body effect and \\(g_o\\),\n\n\\[\n\\boxed{R_{out}\\approx R_S\\parallel\\frac{1}{g_m}}.\n\\]\n\nThus the source follower converts the high-resistance gate input into a low-resistance output.\n\n---\n\n## 5. Large-signal behavior and limits\n\nIn saturation, the instantaneous large-signal relation is\n\n\\[\nV_{out}\n=I_D R_S\n=\\frac{k_nR_S}{2}(V_{in}-V_{out}-V_T)^2.\n\\]\n\nConsequently:\n\n- For low \\(V_{in}\\), the transistor cuts off and \\(V_{out}\\rightarrow0\\).\n- As \\(V_{in}\\) rises, \\(V_{out}\\) follows it with reduced gain and a threshold-related offset.\n- The upper output is limited by the saturation requirement and available input swing.\n- Excessive \\(V_{in}\\) or load current can drive the transistor into the triode region, after which \\(V_{out}\\) no longer follows \\(V_{in}\\) accurately.\n\n## Overall\n\nThe stage is a **noninverting voltage buffer/source follower**. It offers:\n\n\\[\n\\boxed{\\text{Very high input resistance}}\n\\]\n\n\\[\n\\boxed{\\text{Voltage gain slightly below unity}}\n\\]\n\n\\[\n\\boxed{\\text{Low output resistance and good current-drive capability}}\n\\]\n\nA numerical bias point and gain cannot be obtained without \\(V_{in,Q}\\), \\(R_S\\), and the MOS parameters \\(k_n\\), \\(V_T\\), and \\(r_o\\).",
        "format": "markdown",
        "sha256": "b3664386f6c94eec9d22f8e81a6b996d75db7307540a8acd0b218ea97a55ff60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, matching the full-credit rule. The additional body-effect, output-resistance, and bias analysis is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1451,
        "input_tokens": 1452,
        "output_tokens": 13943,
        "total_tokens": 15395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1451,
        "input_tokens": 1452,
        "output_tokens": 13943,
        "total_tokens": 15395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\n\\(M_1\\) is an NMOS with:\n\n- Drain connected to \\(V_{DD}\\)\n- Gate driven by \\(V_{in}\\)\n- Source connected to \\(V_{out}\\)\n- \\(R_S\\) connected from \\(V_{out}\\) to ground\n\nThus, this is a **common-drain amplifier**, also called a **source follower**. The output is taken from the source, so the circuit is noninverting and has voltage gain slightly less than unity.\n\nBecause no gate-bias network is shown, \\(V_{in}\\) must include a DC bias voltage sufficient to turn \\(M_1\\) on.\n\n---\n\n## 2. DC analysis\n\nLet the quiescent values be\n\n\\[\nV_{G,Q}=V_{in,Q}, \\qquad V_{S,Q}=V_{out,Q}.\n\\]\n\nFor an unloaded output, the drain current flows through \\(R_S\\):\n\n\\[\nI_{D,Q}=\\frac{V_{out,Q}}{R_S}.\n\\]\n\nThe gate-to-source voltage is\n\n\\[\nV_{GS,Q}=V_{in,Q}-V_{out,Q}.\n\\]\n\nAssuming \\(M_1\\) operates in saturation and using the long-channel square-law model,\n\n\\[\nI_D=\\frac{\\beta}{2}(V_{GS}-V_T)^2,\n\\]\n\nwhere\n\n\\[\n\\beta=\\mu_n C_{ox}\\frac WL.\n\\]\n\nTherefore, the DC operating point satisfies\n\n\\[\n\\boxed{\n\\frac{V_{out,Q}}{R_S}\n=\n\\frac{\\beta}{2}\n\\left(V_{in,Q}-V_{out,Q}-V_T\\right)^2\n}\n\\]\n\nThis equation can be solved numerically. Defining \\(A_Q=V_{in,Q}-V_T\\), an explicit form for the overdrive voltage is\n\n\\[\nV_{OV,Q}\n=\n\\frac{\\sqrt{1+2\\beta R_S A_Q}-1}{\\beta R_S},\n\\]\n\nand hence\n\n\\[\n\\boxed{\nV_{out,Q}=V_{in,Q}-V_T-V_{OV,Q}.\n}\n\\]\n\nThe static supply current is\n\n\\[\nI_{D,Q}=\\frac{V_{out,Q}}{R_S}.\n\\]\n\n### Operating-region conditions\n\n- **Cutoff:**\n  \\[\n  V_{in,Q}\\le V_T\n  \\quad\\Rightarrow\\quad\n  V_{out,Q}\\approx 0.\n  \\]\n\n- **Saturation:**\n  \\[\n  V_{GS,Q}>V_T,\n  \\qquad\n  V_{DS,Q}=V_{DD}-V_{out,Q}\\ge V_{OV,Q}.\n  \\]\n\n  Since \\(V_{DS,Q}\\ge V_{OV,Q}\\) reduces to\n\n  \\[\n  \\boxed{V_{DD}\\ge V_{in,Q}-V_T},\n  \\]\n\n  this condition is usually satisfied for adequate supply voltage.\n\n- If \\(V_{DD}\\) is insufficient, \\(M_1\\) enters the triode region and the output approaches \\(V_{DD}\\) as the input is increased.\n\n---\n\n## 3. Small-signal analysis\n\nFor AC analysis, \\(V_{DD}\\) is an AC ground. Let\n\n\\[\ng_m=\\beta V_{OV,Q}, \\qquad g_o=\\frac{1}{r_o}.\n\\]\n\nAt the source/output node,\n\n\\[\n\\frac{v_{out}}{R_S}\n+g_m(v_{in}-v_{out})\n+\\frac{v_{out}}{r_o}=0.\n\\]\n\nThus the voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m}\n{g_m+g_o+\\dfrac{1}{R_S}}\n}\n\\]\n\nIf channel-length modulation is neglected, \\(g_o\\approx0\\), giving\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_mR_S}{1+g_mR_S}\n}\n\\]\n\nand for \\(g_mR_S\\gg1\\),\n\n\\[\nA_v\\approx 1-\\frac{1}{g_mR_S}.\n\\]\n\nThe gain is therefore:\n\n- Positive, or noninverting\n- Less than one\n- Close to unity when \\(g_mR_S\\) is large\n\nIt is also the local slope of the DC transfer characteristic:\n\n\\[\nA_v=\\left.\\frac{dV_{out}}{dV_{in}}\\right|_{Q}.\n\\]\n\n---\n\n## 4. Input and output resistance\n\n### Input resistance\n\nSince the MOS gate draws essentially no current,\n\n\\[\n\\boxed{R_{in}\\rightarrow\\infty}\n\\]\n\nexcept for gate leakage and capacitances at high frequency.\n\n### Output resistance\n\nLooking back into the output with the input voltage set to zero,\n\n\\[\n\\boxed{\nR_{out}=\n\\frac{1}\n{g_m+g_o+\\dfrac{1}{R_S}}\n}\n\\]\n\nor, neglecting \\(r_o\\),\n\n\\[\n\\boxed{\nR_{out}=\\frac{1}{g_m}\\parallel R_S.\n}\n\\]\n\nThe low output resistance and high input resistance make this circuit useful as a buffer.\n\n---\n\n## 5. Effect of an external load\n\nIf a load \\(R_L\\) is connected from \\(V_{out}\\) to ground, define\n\n\\[\nR_X=R_S\\parallel R_L.\n\\]\n\nThen\n\n\\[\nA_v=\n\\frac{g_m}\n{g_m+g_o+\\dfrac{1}{R_X}},\n\\]\n\nand the DC operating-point equation uses \\(R_X\\) in place of \\(R_S\\).\n\n---\n\n## 6. Overall behavior\n\nA positive change in \\(V_{in}\\) increases \\(V_{GS}\\), which increases the NMOS current and raises the voltage across \\(R_S\\). Consequently, \\(V_{out}\\) follows \\(V_{in}\\).\n\nAt DC,\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_T-V_{OV}},\n\\]\n\nso the output is below the gate voltage by the threshold voltage plus the overdrive voltage. The source follower therefore provides:\n\n- High input resistance\n- Low output resistance\n- Noninverting voltage transfer\n- Voltage gain close to unity\n- Better linearity and bias stability than an undegenerated common-source stage\n\nNumerical operating-point and gain values require \\(V_{DD}\\), \\(R_S\\), \\(V_T\\), \\(\\beta\\), and the DC input bias.",
        "format": "markdown",
        "sha256": "2df739d0d99f4efc48660324cbf34266974222e027f6524a4e90cc856cff99fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as \\(g_mR_S/(1+g_mR_S)\\), satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1451,
        "input_tokens": 1452,
        "output_tokens": 15279,
        "total_tokens": 16731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1451,
        "input_tokens": 1452,
        "output_tokens": 15279,
        "total_tokens": 16731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14034,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThere is a notation inconsistency in the drawing:\n\n- The labels \\(M_1\\) and \\(R_D\\) normally indicate an **NMOS transistor and drain resistor**.\n- The arrowed three-terminal symbol, however, resembles an **NPN BJT**.\n\nThus the intended circuit is most likely a **common-gate NMOS amplifier**, while the literal symbol would represent a common-base NPN stage.\n\n---\n\n## 1. Intended NMOS interpretation\n\nFor an NMOS:\n\n- Gate: connected to \\(V_{DD}\\)\n- Source: connected to \\(V_{in}\\)\n- Drain: connected to \\(V_{out}\\)\n- Drain load: \\(R_D\\) from \\(V_{out}\\) to \\(V_{DD}\\)\n\nSince \\(V_{DD}\\) is an AC ground, this is a **common-gate amplifier**.\n\n### DC analysis\n\n\\[\nV_{GS}=V_{DD}-V_{in}\n\\]\n\nIn saturation,\n\n\\[\nI_D=\\frac{1}{2}\\mu_n C_{\\mathrm{ox}}\\frac WL(V_{GS}-V_T)^2\n\\]\n\nand\n\n\\[\nV_{out}=V_{DD}-I_D R_D.\n\\]\n\nThe saturation requirement is\n\n\\[\nV_{DS}\\ge V_{GS}-V_T\n\\]\n\nwhich reduces to\n\n\\[\nV_{out}\\ge V_{DD}-V_T.\n\\]\n\nTherefore \\(R_D\\) must be chosen so that the drain voltage does not fall too far below \\(V_{DD}\\).\n\n### Small-signal behavior\n\nWith the gate at AC ground and \\(v_{gs}=-v_{in}\\), ignoring \\(r_o\\),\n\n\\[\ni_d=-g_m v_{in}.\n\\]\n\nApplying KCL at the drain gives\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}\\approx +g_mR_D}\n\\]\n\nor, including channel-length modulation,\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_m+g_o}{g_o+1/R_D}\n\\approx +g_m(R_D\\parallel r_o)\n}\n\\]\n\nThus:\n\n- The stage is **non-inverting**.\n- Increasing \\(V_{in}\\) reduces \\(V_{GS}\\), reduces \\(I_D\\), and raises \\(V_{out}\\).\n- Input resistance looking into the source is low:\n\n\\[\n\\boxed{R_{in}\\approx \\frac{1}{g_m}}\n\\]\n\nassuming body effect is neglected.\n\n- Output resistance is high:\n\n\\[\n\\boxed{R_{out}\\approx R_D\\parallel r_o}.\n\\]\n\nThe main limitation is drain-voltage headroom: because both gate and drain supply are at \\(V_{DD}\\), the output must remain above approximately \\(V_{DD}-V_T\\) for saturation. A lower gate bias or a higher drain supply provides more output swing.\n\n---\n\n## 2. If the arrowed device is literally an NPN BJT\n\nThen the circuit is a **common-base NPN stage**:\n\n- Base: \\(V_{DD}\\)\n- Emitter: \\(V_{in}\\)\n- Collector: \\(V_{out}\\)\n\nFor forward-active operation,\n\n\\[\nV_C>V_B.\n\\]\n\nHowever,\n\n\\[\nV_C=V_{DD}-I_C R_D\\le V_{DD}=V_B,\n\\]\n\nso the collector-base junction cannot be reverse biased. Therefore, as drawn, the transistor enters **saturation** whenever it conducts; it is not a valid linear common-base amplifier.\n\nIn deep saturation, approximately,\n\n\\[\nV_E\\simeq V_{DD}-0.7\\text{ to }0.8\\text{ V},\n\\qquad\nV_C\\simeq V_{DD}-0.4\\text{ to }0.6\\text{ V}.\n\\]\n\nThe output therefore behaves more like a nonlinear clamp or switch than an amplifier.\n\nTo obtain proper common-base operation, the base would need a separate DC bias \\(V_B<V_{DD}\\), with the base AC-grounded and the collector biased so that \\(V_C>V_B\\). Under that corrected bias,\n\n\\[\n\\frac{v_{out}}{v_{in}}\\approx +g_m(R_D\\parallel r_o),\n\\qquad\nR_{in}\\approx \\frac{1}{g_m},\n\\]\n\nagain giving a non-inverting common-base amplifier.\n\n**Most likely intended conclusion:** the figure represents a common-gate NMOS amplifier with positive voltage gain, low input resistance, and high output resistance.",
        "format": "markdown",
        "sha256": "151dc6265ffa32c13118409556a94e49c278f896f0154ad135c0d66dc62eaece"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate stage and gives the non-inverting gain and approximately 1/gm input resistance. The extra BJT interpretation is unnecessary but does not undermine the intended analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1421,
        "output_tokens": 25951,
        "total_tokens": 27372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1421,
        "output_tokens": 25951,
        "total_tokens": 27372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nAssuming \\(M_1\\) is an NMOS:\n\n- Gate is connected to \\(V_{DD}\\).\n- Input is applied to the source.\n- Output is taken from the drain.\n- \\(R_D\\) is the drain load.\n\nThus, this is a **common-gate NMOS stage**. For small-signal analysis, an ideal \\(V_{DD}\\) supply is an AC ground, so the gate is at AC ground.\n\nThe DC current path is\n\n\\[\nV_{DD}\\rightarrow R_D\\rightarrow M_1\\rightarrow \\text{input source}.\n\\]\n\nConsequently, the source/input source must sink the transistor drain current.\n\n## 2. DC bias and large-signal behavior\n\nLet the source voltage be \\(V_{\\text{IN}}\\). Then\n\n\\[\nV_{GS}=V_{DD}-V_{\\text{IN}},\n\\qquad\nV_{OV}=V_{DD}-V_{\\text{IN}}-V_T.\n\\]\n\nAssuming saturation and neglecting channel-length modulation,\n\n\\[\nI_D=\\frac{1}{2}k_n(V_{OV})^2,\n\\qquad\nk_n=\\mu_n C_{\\text{ox}}\\frac WL,\n\\]\n\nand\n\n\\[\n\\boxed{V_{\\text{OUT}}=V_{DD}-I_D R_D}\n\\]\n\nor\n\n\\[\n\\boxed{\nV_{\\text{OUT}}\n=\nV_{DD}\n-\\frac{k_nR_D}{2}\n\\left(V_{DD}-V_{\\text{IN}}-V_T\\right)^2\n}\n\\]\n\nwhile the transistor is saturated.\n\n### Region of operation\n\nFor saturation,\n\n\\[\nV_{DS}\\ge V_{GS}-V_T.\n\\]\n\nSince \\(V_{DS}=V_{\\text{OUT}}-V_{\\text{IN}}\\), this reduces to\n\n\\[\n\\boxed{V_{\\text{OUT}}\\ge V_{DD}-V_T}.\n\\]\n\nEquivalently,\n\n\\[\nI_DR_D\\le V_T.\n\\]\n\nTherefore:\n\n- If \\(V_{\\text{IN}}\\ge V_{DD}-V_T\\), the transistor is cut off and \\(V_{\\text{OUT}}=V_{DD}\\).\n- If \\(V_{\\text{OUT}}<V_{DD}-V_T\\), the transistor enters the triode region.\n- A valid quiescent point must satisfy both the saturation condition and \\(V_{\\text{IN}}<V_{DD}-V_T\\).\n\nThe input source therefore must provide the DC bias as well as the signal.\n\n## 3. Small-signal voltage gain\n\nLet \\(v_{\\text{in}}\\) be a small source-voltage variation. Because the gate is at AC ground,\n\n\\[\nv_{gs}=-v_{\\text{in}}.\n\\]\n\nAn increase in \\(v_{\\text{in}}\\) reduces \\(V_{GS}\\), reduces \\(I_D\\), reduces the voltage drop across \\(R_D\\), and therefore increases \\(V_{\\text{OUT}}\\). The stage is therefore **non-inverting**.\n\nNeglecting transistor output resistance,\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}=g_m v_{\\text{in}},\n\\]\n\nso\n\n\\[\n\\boxed{\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}=+g_mR_D\n}.\n\\]\n\nIncluding transistor output resistance \\(r_o\\), with \\(g_o=1/r_o\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_o}{g_o+1/R_D}\n}\n\\]\n\nwhich is normally close to \\(g_mR_D\\) when \\(r_o\\gg R_D\\).\n\n## 4. Input and output resistances\n\nWith \\(r_o\\) neglected, the resistance looking into the source is\n\n\\[\n\\boxed{R_{\\text{in}}\\approx \\frac{1}{g_m}}.\n\\]\n\nIncluding \\(r_o\\),\n\n\\[\nR_{\\text{in}}\n=\n\\frac{1+g_oR_D}{g_m+g_o}.\n\\]\n\nWith the input source set to zero, the resistance looking into the drain is\n\n\\[\n\\boxed{R_{\\text{out}}=R_D\\parallel r_o}.\n\\]\n\n## 5. Overall assessment\n\n- **Topology:** Common-gate NMOS amplifier.\n- **Voltage gain:** Approximately \\(+g_mR_D\\).\n- **Phase:** Non-inverting from source input to drain output.\n- **Input resistance:** Low, approximately \\(1/g_m\\).\n- **Output resistance:** \\(R_D\\parallel r_o\\).\n- **DC requirements:** The source must receive a suitable DC bias, and the output must remain above \\(V_{DD}-V_T\\) for saturation.\n- **Main limitation:** As \\(V_{\\text{IN}}\\) approaches \\(V_{DD}-V_T\\), \\(g_m\\) and hence the gain fall toward zero. Excessive drain current drives the device into triode operation.\n\nNumerical bias, gain, and power values cannot be obtained without \\(R_D\\), device parameters, and the input DC bias.",
        "format": "markdown",
        "sha256": "f2d7d91fd71781b868e26a1680f29f869ffaef080ee3ffbc630a40105b184a03"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology, source input, AC-grounded gate, non-inverting gain, and low input resistance. The additional small-signal and bias analyses are consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1421,
        "output_tokens": 13063,
        "total_tokens": 14484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1408,
        "input_tokens": 1421,
        "output_tokens": 13063,
        "total_tokens": 14484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nInterpreting the MOSFET symbol as drawn:\n\n- Drain of \\(M_1\\): \\(V_{\\text{out}}\\)\n- Source of \\(M_1\\): \\(V_{\\text{in}}\\)\n- Gate of \\(M_1\\): tied to \\(V_{DD}\\)\n- \\(R_D\\): drain load from \\(V_{DD}\\) to the output\n\nSince an ideal DC supply is an AC ground, the gate is at AC ground. Therefore, this is an **NMOS common-gate amplifier**.\n\n```text\n              RD\nVDD ─────────/\\/\\/─── Vout ── D(M1)\n                              S(M1) ─── Vin\nVDD ────────────────────────── G(M1)\n```\n\n## 2. DC operation\n\nLet the quiescent source voltage be \\(V_{S,Q}=V_{\\text{in},Q}\\). Since the gate is at \\(V_{DD}\\),\n\n\\[\nV_{GS,Q}=V_{DD}-V_{S,Q}.\n\\]\n\nAssuming \\(M_1\\) is in saturation,\n\n\\[\nI_{D,Q}\\approx \\frac{1}{2}\\beta_n\n\\left(V_{GS,Q}-V_{tn}\\right)^2,\n\\qquad\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac WL .\n\\]\n\nThe quiescent output voltage is\n\n\\[\nV_{\\text{out},Q}=V_{DD}-I_{D,Q}R_D.\n\\]\n\nFor saturation, the instantaneous drain voltage must satisfy approximately\n\n\\[\nV_{DS}\\ge V_{GS}-V_{tn}.\n\\]\n\nWith the gate fixed at \\(V_{DD}\\), this is equivalent to\n\n\\[\nV_{\\text{out},Q}\\ge V_{DD}-V_{tn}.\n\\]\n\n### Biasing limitation\n\nThe figure does not show a DC bias path for the source. The NMOS drain current exits through the source and must be sunk by the input source or by an additional current-source/bias network. In a practical common-gate stage, the source is usually biased with a current sink to ground and the signal is AC-coupled into it. Otherwise, the quiescent operating point is not properly established.\n\n## 3. Small-signal voltage gain\n\nFor small-signal operation, \\(V_{DD}\\) is ground and hence\n\n\\[\nv_g=0,\\qquad v_{gs}=-v_i,\\qquad v_{ds}=v_o-v_i.\n\\]\n\nUsing the MOSFET small-signal drain current\n\n\\[\ni_d=g_m v_{gs}+g_o v_{ds},\n\\]\n\nand applying KCL at the drain gives\n\n\\[\n\\frac{v_o}{R_D}+g_m(-v_i)+g_o(v_o-v_i)=0.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\frac{v_o}{v_i}\n=\n\\frac{g_m+g_o}{g_o+1/R_D}\n}\n\\]\n\nor, with \\(r_o=1/g_o\\),\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\n\\frac{1+g_m r_o}{1+r_o/R_D}\n}.\n\\]\n\nIf \\(r_o\\gg R_D\\),\n\n\\[\n\\boxed{A_v\\approx g_mR_D}.\n\\]\n\nThe gain is **positive**: the common-gate stage does not invert the signal.\n\nPhysically:\n\n\\[\nv_s\\uparrow\n\\;\\Rightarrow\\;\nV_{GS}\\downarrow\n\\;\\Rightarrow\\;\nI_D\\downarrow\n\\;\\Rightarrow\\;\nI_DR_D\\downarrow\n\\;\\Rightarrow\\;\nv_o\\uparrow .\n\\]\n\n## 4. Input and output resistances\n\nThe input is applied to the source, so the input resistance is relatively low:\n\n\\[\n\\boxed{R_{\\text{in}}\\approx \\frac{1}{g_m}}.\n\\]\n\nIncluding \\(r_o\\) and the drain load,\n\n\\[\nR_{\\text{in}}\n=\n\\frac{r_o+R_D}{1+g_m r_o}.\n\\]\n\nLooking back into the output with the source driven to zero,\n\n\\[\n\\boxed{R_{\\text{out}}\\approx R_D\\parallel r_o\\approx R_D}.\n\\]\n\nIf an external load \\(R_L\\) is connected at the output, replace \\(R_D\\) by \\(R_D\\parallel R_L\\) in the AC gain calculation.\n\n## 5. Overall assessment\n\nThis is a **noninverting, common-gate NMOS amplifier** characterized by:\n\n- Large voltage gain: \\(A_v\\approx g_mR_D\\)\n- Low input resistance: \\(R_{\\text{in}}\\approx1/g_m\\)\n- Approximately \\(R_D\\) output resistance\n- No phase inversion\n- Little or no Miller multiplication of the input capacitance, making it useful at high frequencies\n- An incomplete DC bias arrangement unless the input source provides the required source-current path\n\nIf the source is tied to a nonzero DC bias and the signal is superimposed on it, the stage can operate normally. Without that bias, the output will generally be clamped near either \\(V_{DD}\\) (cutoff) or toward the triode region.",
        "format": "markdown",
        "sha256": "7706c3f95aac44f5e777e6c1234dc7107903a788a62d2897a01978b43ed28f45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-input common-gate topology with an AC-grounded gate, derives the noninverting gain, and gives the expected low input resistance. The finite-ro expressions are consistent with the circuit; the additional bias discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1421,
        "output_tokens": 19824,
        "total_tokens": 21245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1421,
        "output_tokens": 19824,
        "total_tokens": 21245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Circuit as drawn\n\nThe important feature is that the source of \\(M_1\\), the right plate of \\(C_1\\), and ground are all connected to the same node.\n\n### DC bias\n\n- \\(C_1\\) is open for DC.\n- The source voltage is \\(V_S=0\\).\n- Assuming \\(M_1\\) is an NMOS, the gate bias \\(V_b\\) establishes the drain current. In saturation,\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_n C_{\\mathrm{ox}}\\frac WL(V_b-V_{TH})^2\n\\]\n\nand\n\n\\[\nV_{out,DC}=V_{DD}-I_D R_D.\n\\]\n\nThe bias should satisfy\n\n\\[\nV_{out,DC}\\geq V_b-V_{TH}\n\\]\n\nfor saturation.\n\n### Small-signal behavior\n\nFor AC:\n\n- \\(V_{DD}\\) and the ideal \\(V_b\\) bias source are grounds.\n- The source of \\(M_1\\) is also hard-grounded.\n- Therefore,\n\n\\[\nv_{gs}=v_g-v_s=0.\n\\]\n\nThe controlled current source \\(g_mv_{gs}\\) is inactive. The output node is simply connected to AC ground through \\(R_D\\) (and \\(r_o\\)), so\n\n\\[\n\\frac{v_{out}}{R_D}+\\frac{v_{out}}{r_o}=0\n\\]\n\nand hence\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}=0}.\n\\]\n\nThe input source only sees \\(C_1\\) connected to ground, so its input impedance is approximately\n\n\\[\n\\boxed{Z_{in}=\\frac{1}{sC_1}}\n\\]\n\napart from the source resistance.\n\nThus, **as drawn, this circuit does not amplify \\(V_{in}\\)**. It merely establishes a DC drain voltage at \\(V_{out}\\); \\(C_1\\) only loads the input source with a capacitor.\n\n## Likely intended circuit\n\nTwo possible corrections are possible:\n\n1. **Common-source amplifier:** Connect \\(C_1\\) to the gate of \\(M_1\\), and provide the gate bias through a proper bias network. The midband gain would be approximately\n\n   \\[\n   A_v \\approx -g_m(R_D\\parallel R_L).\n   \\]\n\n2. **Common-gate amplifier:** Keep the input connected to the source, but replace the direct source ground with a DC bias arrangement having high AC impedance, such as a current source. Then the midband gain would be positive:\n\n   \\[\n   A_v \\approx +g_m(R_D\\parallel R_L),\n   \\]\n\n   with approximately\n\n   \\[\n   R_{in}\\approx \\frac{1}{g_m},\n   \\qquad\n   R_{out}\\approx R_D\\parallel r_o.\n   \\]\n\n   Including \\(r_o\\), with \\(R_D'=R_D\\parallel R_L\\),\n\n   \\[\n   \\frac{v_{out}}{v_{in}}\n   =\n   \\frac{(1+g_mr_o)R_D'}{r_o+R_D'},\n   \\qquad\n   R_{in}=\\frac{r_o+R_D'}{1+g_mr_o}.\n   \\]\n\nTherefore, the central issue is that the shown grounding of the source completely removes the input signal from \\(M_1\\).",
        "format": "markdown",
        "sha256": "ae312babbed74ac765d31a3b5a4ab845787882de63fbdcc92fef05ad120588e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source/input node is hard-shorted to ground, so the input produces no small-signal source voltage and the ideal gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 13265,
        "total_tokens": 15317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2052,
        "output_tokens": 13265,
        "total_tokens": 15317,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12595,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit interpretation\n\nWith the usual NMOS interpretation of the symbol:\n\n- **Gate:** fixed at \\(V_b\\)\n- **Drain:** connected to \\(V_{\\text{out}}\\) through \\(R_D\\)\n- **Source:** connected to \\(C_1\\), and directly to ground\n- **Supply:** \\(V_{DD}\\)\n\nThis resembles a common-gate stage, but the direct connection of the source node to an ideal ground is important: it prevents \\(V_{\\text{in}}\\) from producing any signal voltage at the transistor source.\n\n---\n\n## 2. DC operating point\n\nAt DC, \\(C_1\\) is an open circuit. Therefore\n\n\\[\nV_G=V_b,\\qquad V_S=0,\\qquad V_{GS}=V_b.\n\\]\n\nIf \\(M_1\\) is on and operating in saturation,\n\n\\[\nI_D \\approx \\frac{1}{2}\\mu_n C_{\\text{ox}}\\frac WL\n(V_b-V_{TN})^2\n\\equiv \\frac{\\beta}{2}(V_b-V_{TN})^2.\n\\]\n\nThus,\n\n\\[\n\\boxed{V_{\\text{out,DC}}=V_{DD}-R_D I_D}\n\\]\n\nor\n\n\\[\n\\boxed{\nV_{\\text{out,DC}}\n=\nV_{DD}\n-\nR_D\\frac{\\beta}{2}(V_b-V_{TN})^2\n}\n\\]\n\nThe saturation requirement is\n\n\\[\nV_{\\text{out,DC}}\\ge V_b-V_{TN}.\n\\]\n\nIf \\(V_b\\le V_{TN}\\), the transistor is cut off and \\(V_{\\text{out,DC}}=V_{DD}\\).\n\n---\n\n## 3. Small-signal behavior as drawn\n\nFor small signals:\n\n- The source is held at zero by the ideal ground.\n- The gate is held at its AC-grounded bias voltage \\(V_b\\).\n- Therefore,\n\n\\[\nv_{gs}=v_g-v_s=0.\n\\]\n\nConsequently, the transistor's \\(g_mv_{gs}\\) controlled source produces no signal variation, and\n\n\\[\n\\boxed{A_v=\\frac{v_{\\text{out,ac}}}{v_{\\text{in,ac}}}=0}.\n\\]\n\nThe capacitor only loads the input. Its impedance is\n\n\\[\nZ_{C_1}=\\frac{1}{j\\omega C_1},\n\\]\n\nso the input current is approximately\n\n\\[\ni_{\\text{in}}=j\\omega C_1V_{\\text{in}}.\n\\]\n\nThe output impedance looking into \\(V_{\\text{out}}\\) is approximately\n\n\\[\nR_{\\text{out}}\\approx R_D\\parallel r_o,\n\\]\n\nbut there is no intentional input-to-output signal transfer.\n\n### Important consequence\n\n**As drawn, this is not a functioning common-gate amplifier.** The source is directly clamped to ground, so \\(C_1\\) cannot superimpose \\(V_{\\text{in}}\\) on the source voltage. The transistor remains a fixed DC current sink set by \\(V_b\\).\n\n---\n\n## 4. If a common-gate amplifier was intended\n\nTo obtain common-gate operation, the source must be biased through a **finite impedance or current source**, rather than tied directly to ideal ground. Then:\n\n- An increase in source voltage reduces \\(v_{gs}\\).\n- The drain current decreases.\n- The drain voltage rises.\n\nThus, the common-gate stage is **non-inverting**, with approximately\n\n\\[\n\\boxed{A_v \\approx +g_m(R_D\\parallel R_L)}\n\\]\n\nwhen \\(r_o\\) is neglected, and\n\n\\[\n\\boxed{R_{\\text{in}}\\approx \\frac{1}{g_m}}\n\\]\n\nor \\(1/(g_m+g_{mb})\\) if body effect is included. The output resistance is approximately\n\n\\[\nR_{\\text{out}}\\approx R_D\\parallel r_o.\n\\]\n\nThe coupling capacitor then forms a high-pass network with the resistance seen at the source side.\n\nIf instead a **common-source amplifier** was intended, \\(C_1\\) should feed the gate through a finite gate-bias network, and the gain would be approximately\n\n\\[\nA_v\\approx -g_m(R_D\\parallel r_o\\parallel R_L).\n\\]\n\n### Bottom line\n\nWith the wiring exactly as shown, \\(C_1\\) has no useful role in driving \\(M_1\\), the circuit has zero small-signal gain, and its output is determined solely by the DC bias condition.",
        "format": "markdown",
        "sha256": "949b7bd72cdfcf1e8a8c468b9d39215fd187951add11f1bf34763c857da115ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot create a source signal and the ideal small-signal gain from Vin is zero. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2052,
        "output_tokens": 13463,
        "total_tokens": 15515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2052,
        "output_tokens": 13463,
        "total_tokens": 15515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Key observation\n\nAs drawn, the right terminal of \\(C_1\\), the lower terminal of \\(M_1\\), and ground are all the same node. Therefore, the lower terminal of \\(M_1\\)—the source for the NMOS shown—is hard-grounded.\n\nConsequently, \\(C_1\\) is simply connected from \\(V_{\\text{in}}\\) to ground. It cannot inject an input voltage into \\(M_1\\).\n\n## DC analysis\n\nSince \\(C_1\\) is open at DC:\n\n\\[\nV_{GS,Q}=V_b\n\\]\n\nFor an NMOS operating in saturation,\n\n\\[\nI_{D,Q}=\\frac{1}{2}k_n(V_b-V_T)^2,\n\\qquad\nk_n=\\mu_n C_{\\text{ox}}\\frac WL\n\\]\n\nand the quiescent output voltage is\n\n\\[\nV_{\\text{out},Q}=V_{DD}-I_{D,Q}R_D.\n\\]\n\nFor saturation, approximately,\n\n\\[\nV_{\\text{out},Q}\\ge V_b-V_T.\n\\]\n\nIf \\(M_1\\) is off, \\(V_{\\text{out},Q}=V_{DD}\\).\n\n## AC/small-signal analysis\n\nBoth \\(V_{DD}\\) and the bias source \\(V_b\\) are AC grounds. However, the source of \\(M_1\\) is also AC-grounded, so\n\n\\[\nv_{gs}=v_g-v_s=0.\n\\]\n\nThus the input produces no change in \\(M_1\\)'s drain current and\n\n\\[\n\\boxed{\\frac{v_{\\text{out}}}{v_{\\text{in}}}=0}.\n\\]\n\nThe input source only sees the coupling capacitor:\n\n\\[\nZ_{\\text{in}}\\approx \\frac{1}{sC_1},\n\\]\n\nand for an ideal sinusoidal source,\n\n\\[\ni_{\\text{in}}=sC_1V_{\\text{in}}.\n\\]\n\nTherefore, **the circuit as actually drawn is not an input amplifier**; it is a DC-biased transistor stage whose output is independent of \\(V_{\\text{in}}\\).\n\nIts output resistance, assuming no additional load, is approximately\n\n\\[\nR_{\\text{out}}\\approx R_D\\parallel r_o.\n\\]\n\n## Likely intended topology\n\nThe drawing appears intended to be a **common-gate NMOS amplifier**. For that topology, the source must not be directly grounded. It should instead have a DC bias path, such as a resistor to ground, while the input is coupled through \\(C_1\\).\n\nWith the gate held at AC ground, a positive source voltage reduces \\(V_{GS}\\), reduces the drain current, and raises \\(V_{\\text{out}}\\); hence the common-gate stage is non-inverting. Its approximate midband gain is\n\n\\[\n\\boxed{A_v\\approx +g_m(R_D\\parallel r_o\\parallel R_L)}\n\\]\n\nand its input resistance looking into the source is approximately\n\n\\[\n\\boxed{R_{\\text{in,CG}}\\approx \\frac{1}{g_m}},\n\\]\n\nso it has a relatively low input impedance. The input coupling capacitor sets a low-frequency corner approximately as\n\n\\[\nf_L\\approx \\frac{1}{2\\pi C_1R_{\\text{equiv}}},\n\\]\n\nwhere \\(R_{\\text{equiv}}\\) includes the signal-source resistance and the bias-network resistance.\n\nAlternatively, if a conventional **common-source amplifier** was intended, \\(C_1\\) should connect to the gate rather than the source, with the gate bias introduced through a suitable high-impedance bias network. In that case,\n\n\\[\nA_v\\approx -g_m(R_D\\parallel r_o\\parallel R_L).\n\\]",
        "format": "markdown",
        "sha256": "55e1dda35bf4ba59ec18a4ae1c50db07e00ad5406883fe9eb715000c8b460e73"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source/input node is hard-grounded, so the input cannot modulate the transistor and the ideal voltage gain is zero. The additional discussion of a possible intended topology does not contradict that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2052,
        "output_tokens": 20168,
        "total_tokens": 22220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2052,
        "output_tokens": 20168,
        "total_tokens": 22220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19434,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**The circuit has two poles, as drawn.**\n\n- The source of \\(M_1\\) is connected directly to ground, so \\(C_{SB}\\) is across an ideal short and does not create a dynamic pole.\n- The only independent reactive nodes are the **gate** and **drain** nodes, giving a second-order transfer-function denominator.\n- \\(C_{GD}\\) couples these two nodes but does not add a third independent pole.\n\nIgnoring \\(r_o\\), the denominator contains terms only up to \\(s^2\\):\n\\[\nD(s)=\n\\left[\\frac1{R_D}+s(C_{DB}+C_{GD})\\right]\n\\left[\\frac1{R_S}+s(C_{GS}+C_{GD})\\right]\n+sC_{GD}(g_m-sC_{GD}).\n\\]\n\nThus, \\(V_{\\text{out}}/V_{\\text{in}}\\) generically has **two finite poles**. If the source were not directly grounded, \\(C_{SB}\\) would introduce a third pole.",
        "format": "markdown",
        "sha256": "341655e654e75e4d6ac636b3c8882402c2f5a89b2b212b21c63b64311a42f917"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: CSB is shorted because the source is grounded, while CGS, CGD, and CDB yield a second-order denominator. The stated denominator is consistent with the two-node circuit.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2316,
        "output_tokens": 14262,
        "total_tokens": 16578,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2316,
        "output_tokens": 14262,
        "total_tokens": 16578,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The circuit has **2 poles**.\n\nWith \\(V_{DD}\\) at AC ground and the MOSFET source grounded, the only dynamic nodes are:\n\n- **Gate node:** associated with \\(C_{GS}\\), \\(R_S\\), and \\(C_{GD}\\)\n- **Drain node:** associated with \\(C_{DB}\\), \\(R_D\\), and \\(C_{GD}\\)\n\nThus, the voltage-transfer denominator is second order. \\(C_{SB}\\) does not add a pole because its source terminal is already at AC ground, while \\(C_{GD}\\) couples the two existing nodes and adds a zero rather than another pole.",
        "format": "markdown",
        "sha256": "cd088709efe333277ee70a17899a34eb1236969063e72486a2976ae32a7480c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles from the gate and drain dynamics, recognizes that CSB is inactive in the grounded configuration, and notes that CGD couples the nodes without adding an independent pole.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2315,
        "input_tokens": 2316,
        "output_tokens": 3443,
        "total_tokens": 5759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2315,
        "input_tokens": 2316,
        "output_tokens": 3443,
        "total_tokens": 5759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**The circuit has two poles.**\n\nIn the small-signal model:\n\n- \\(V_{DD}\\) is AC ground.\n- The source is directly grounded, so \\(C_{SB}\\) is connected across ground and has no effect.\n- There are only two independent dynamic node voltages: the gate node and the drain node.\n- \\(C_{GS}\\) and \\(C_{DB}\\) are shunt capacitances, while \\(C_{GD}\\) couples the two nodes without introducing a third independent state.\n\nTherefore, the transfer-function denominator is second order, giving **two poles** in general.",
        "format": "markdown",
        "sha256": "ba5fcaab2728d2b68100cf8ae42913b8a35be6be17625655526eac462327b231"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and explains that CSB is shorted out because the source is grounded; the remaining coupled capacitors yield two independent states.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2315,
        "input_tokens": 2316,
        "output_tokens": 9727,
        "total_tokens": 12043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2315,
        "input_tokens": 2316,
        "output_tokens": 9727,
        "total_tokens": 12043,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an NMOS with negligible gate current, and neglecting body effect and channel-length modulation initially, this is a **source-input, drain-output feedback amplifier**.\n\n## 1. Feedback topology\n\nSince the MOSFET gate draws negligible current, the divider gives\n\n\\[\nV_F=\\beta V_{\\text{out}},\n\\qquad\n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nThe source voltage is \\(V_{\\text{in}}\\), so\n\n\\[\nV_{GS}=V_F-V_{\\text{in}}\n      =\\beta V_{\\text{out}}-V_{\\text{in}}.\n\\]\n\nThe feedback polarity is negative:\n\n\\[\nV_{\\text{out}}\\uparrow\n\\Rightarrow V_F\\uparrow\n\\Rightarrow V_{GS}\\uparrow\n\\Rightarrow I_D\\uparrow\n\\Rightarrow V_{\\text{out}}\\downarrow.\n\\]\n\nConversely, an increase in \\(V_{\\text{in}}\\) raises the source, reducing \\(V_{GS}\\); the drain current falls and \\(V_{\\text{out}}\\) rises. Thus the overall \\(V_{\\text{out}}/V_{\\text{in}}\\) gain is **positive**.\n\nThis is a **voltage-series**, or **series-shunt**, negative-feedback configuration.\n\n---\n\n## 2. DC operating point\n\nDefine\n\n\\[\nR_F=R_1+R_2,\n\\qquad\nR_X=R_D\\parallel R_F,\n\\qquad\nV_X=V_{DD}\\frac{R_F}{R_D+R_F}.\n\\]\n\nNotice that the output sees \\(R_1+R_2\\), not \\(R_1\\parallel R_2\\), because the gate draws no current.\n\nThe DC output-node equation is\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n+\\frac{V_{\\text{out}}}{R_1+R_2}\n=I_D,\n\\]\n\nor equivalently,\n\n\\[\nV_{\\text{out}}=V_X-R_XI_D.\n\\]\n\nIn saturation, using\n\n\\[\nI_D=\\frac{k_n}{2}V_{OV}^2,\n\\qquad\nk_n=\\mu_n C_{\\text{ox}}\\frac WL,\n\\]\n\nthe overdrive voltage is\n\n\\[\nV_{OV}=V_{GS}-V_T\n      =\\beta V_{\\text{out}}-V_{\\text{in}}-V_T.\n\\]\n\nTherefore the bias point is determined by\n\n\\[\n\\boxed{\n\\frac{\\beta k_nR_X}{2}V_{OV}^2\n+V_{OV}\n+V_{\\text{in}}+V_T\n-\\beta V_X=0\n}\n\\]\n\nThe physical positive root is\n\n\\[\nV_{OV}=\n\\frac{-1+\n\\sqrt{1+2\\beta k_nR_X(\\beta V_X-V_{\\text{in}}-V_T)}}\n{\\beta k_nR_X},\n\\]\n\nafter which\n\n\\[\nV_{\\text{out}}\n=\nV_X-\\frac{k_nR_X}{2}V_{OV}^2.\n\\]\n\nOperating-region checks are\n\n\\[\nV_{OV}>0,\n\\qquad\nV_{\\text{out}}-V_{\\text{in}}\\ge V_{OV}.\n\\]\n\nIf\n\n\\[\n\\beta V_X\\le V_{\\text{in}}+V_T,\n\\]\n\nthe transistor may be cut off, in which case\n\n\\[\nV_{\\text{out}}=V_X,\\qquad I_D\\approx 0.\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nFor small signals, \\(V_{DD}\\) is AC ground, and\n\n\\[\nv_f=\\beta v_{\\text{out}}.\n\\]\n\nNeglecting \\(r_o\\),\n\n\\[\ni_d=g_m(v_f-v_{\\text{in}})\n   =g_m(\\beta v_{\\text{out}}-v_{\\text{in}}).\n\\]\n\nKCL at the output gives\n\n\\[\n\\frac{v_{\\text{out}}}{R_X}+i_d=0,\n\\]\n\nhence\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_mR_X}{1+g_m\\beta R_X}\n}\n\\]\n\nwhich is positive.\n\nIf the loading due to \\(R_1+R_2\\) is intentionally neglected, set \\(R_X\\approx R_D\\):\n\n\\[\nA_v\\approx\n\\frac{g_mR_D}{1+g_m\\beta R_D}.\n\\]\n\nWith transistor output resistance \\(r_o\\), \\(g_o=1/r_o\\), the result becomes\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m+g_o}\n{g_m\\beta+g_o+\\dfrac1{R_X}}\n}.\n\\]\n\nIf the bulk is grounded and body effect is included, replace \\(g_m+g_o\\) in the numerator by \\(g_m+g_{mb}+g_o\\).\n\n---\n\n## 4. Feedback interpretation\n\nThe loop-gain magnitude can be written as\n\n\\[\nL=g_m\\beta R_X.\n\\]\n\nThus the source-to-output gain is a common-gate-type gain reduced by feedback:\n\n\\[\nA_v=\\frac{g_mR_X}{1+L}.\n\\]\n\nFor large loop gain,\n\n\\[\nA_v\\approx\\frac1\\beta\n=\\frac{R_1+R_2}{R_2}.\n\\]\n\nThe ideal small-signal input resistance at the source becomes\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\\frac{1+g_m\\beta R_X}{g_m}\n=\\frac1{g_m}+\\beta R_X\n}\n\\]\n\nand the output resistance with \\(V_{\\text{in}}\\) set to zero is\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{1}{\\dfrac1{R_X}+g_m\\beta}\n}\n\\]\n\nor, including \\(g_o\\),\n\n\\[\nR_{\\text{out}}\n=\n\\frac{1}\n{\\dfrac1{R_X}+g_m\\beta+g_o}.\n\\]\n\nTherefore the feedback:\n\n- reduces the closed-loop gain relative to the fixed-gate common-gate stage,\n- increases the input resistance,\n- decreases the output resistance.\n\nThe circuit is statically stable because the loop is negative, though high-frequency stability would require inclusion of the MOSFET capacitances and any nonzero source impedance.",
        "format": "markdown",
        "sha256": "9b6f995a963f5d95c66203ea117d4f6b9d2aa016dc718c4c34e05336f6012248"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback polarity, and gives the correct positive closed-loop gain. The golden solution explicitly grants full credit for these points; extra secondary discussion does not detract.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 198,
        "input_tokens": 1960,
        "output_tokens": 26358,
        "total_tokens": 28318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 198,
        "input_tokens": 1960,
        "output_tokens": 26358,
        "total_tokens": 28318,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The key feature is that \\(V_{\\text{in}}\\) is applied to the **source** of \\(M_1\\), not to its gate. Thus, this is a common-gate-like stage with output-voltage feedback.\n\nLet\n\n\\[\nR_\\Sigma \\equiv R_1+R_2,\n\\qquad\n\\beta_f\\equiv \\frac{R_2}{R_1+R_2}.\n\\]\n\nBecause the MOS gate draws negligible current,\n\n\\[\nV_F=\\beta_f V_{\\text{out}}.\n\\]\n\n## 1. Feedback action\n\nFor an nMOS,\n\n\\[\nv_{GS}=v_F-v_{\\text{in}}\n       =\\beta_f v_{\\text{out}}-v_{\\text{in}}.\n\\]\n\nAn increase in \\(v_{\\text{in}}\\) initially reduces \\(v_{GS}\\), reducing the drain current. Since \\(R_D\\) connects the output to \\(V_{DD}\\), the output voltage rises. The rising \\(V_{\\text{out}}\\) raises \\(V_F\\), which opposes the original change in \\(v_{GS}\\).\n\nTherefore, the circuit has **negative feedback**: output voltage is sampled by \\(R_1,R_2\\) and fed back so as to correct the \\(v_{GS}\\) variation.\n\n## 2. DC operating point\n\nFor an nMOS in saturation, with\n\n\\[\nK_n=\\frac{1}{2}k_n'\\frac WL,\n\\]\n\nthe drain current is\n\n\\[\nI_D=K_n\\left(V_F-V_{\\text{in}}-V_{TH}\\right)^2.\n\\]\n\nThe output-node KCL is\n\n\\[\n\\boxed{\n\\frac{V_{DD}-V_O}{R_D}\n=\n\\frac{V_O}{R_1+R_2}\n+\nK_n\\left(\\beta_fV_O-V_{\\text{in}}-V_{TH}\\right)^2\n}\n\\]\n\nwhere \\(V_O=V_{\\text{out}}\\). This is a quadratic equation in \\(V_O\\), from which the physical root is selected.\n\nThe device must satisfy\n\n\\[\n\\beta_fV_O-V_{\\text{in}}>V_{TH}\n\\]\n\nand, for saturation,\n\n\\[\nV_O\\geq \\beta_fV_O-V_{TH}.\n\\]\n\nIf \\(M_1\\) is off,\n\n\\[\nV_O=V_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2}.\n\\]\n\nThus, some DC bias is required at the source/input terminal; a zero-mean signal superimposed on an appropriate DC source voltage is normally used.\n\n## 3. Midband small-signal voltage gain\n\nAssume:\n\n- \\(V_{DD}\\) is an AC ground,\n- the MOS is saturated,\n- \\(g_m\\) and \\(g_o=1/r_o\\) are its small-signal parameters,\n- body effect is neglected,\n- the input source has low source impedance.\n\nAt the output node,\n\n\\[\n\\frac{v_o}{R_D}\n+\\frac{v_o}{R_\\Sigma}\n+g_m(\\beta_fv_o-v_i)\n+g_o(v_o-v_i)=0.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\frac{v_o}{v_i}\n=\n\\frac{g_m+g_o}\n{\\dfrac1{R_D}+\\dfrac1{R_1+R_2}\n+\\beta_f g_m+g_o}\n}\n\\]\n\nNeglecting \\(g_o\\),\n\n\\[\n\\boxed{\nA_v=\\frac{v_o}{v_i}\n=\n\\frac{g_m}\n{\\dfrac1{R_D}+\\dfrac1{R_1+R_2}\n+\\dfrac{R_2}{R_1+R_2}g_m}\n}\n\\]\n\nor\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_m(R_1+R_2)}\n{1+\\dfrac{R_1+R_2}{R_D}+g_mR_2}\n}\n\\]\n\nThe gain is positive for the shown source-input, pull-up drain arrangement.\n\nDefining the no-feedback common-gate-like gain\n\n\\[\nA_0=\\frac{g_m}\n{\\dfrac1{R_D}+\\dfrac1{R_1+R_2}},\n\\]\n\nthe result can also be written as\n\n\\[\nA_v=\\frac{A_0}{1+\\beta_f A_0}.\n\\]\n\n### High-loop-gain limit\n\nFor \\(\\beta_fA_0\\gg1\\),\n\n\\[\nv_F\\simeq v_{\\text{in}},\n\\]\n\nso\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n\\simeq\n\\frac{1}{\\beta_f}\n=\n\\frac{R_1+R_2}{R_2}\n=\n1+\\frac{R_1}{R_2}\n}\n\\]\n\nThis approximation is valid only while \\(M_1\\) remains on and in its active region and the output does not hit its supply limits.\n\n## 4. Output resistance\n\nWith the input source set to zero,\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\left(\n\\frac1{R_D}\n+\\frac1{R_1+R_2}\n+g_o+\\beta_f g_m\n\\right)^{-1}\n}\n\\]\n\nThe negative feedback lowers the output resistance compared with the circuit without feedback.\n\nLooking into the source terminal, neglecting body current, the input resistance is\n\n\\[\nR_{\\text{in}}\n=\n\\frac{\n\\dfrac1{R_D}+\\dfrac1{R_1+R_2}+g_o+\\beta_fg_m\n}{\n(g_m+g_o)\n\\left(\n\\dfrac1{R_D}+\\dfrac1{R_1+R_2}\n\\right)\n}.\n\\]\n\n## Important observations\n\n- \\(R_1\\) and \\(R_2\\) appear as \\(R_1+R_2\\) as the output load because the gate draws no current; they are not in parallel as seen from the output.\n- If an additional output load \\(R_L\\) is present, replace\n  \\[\n  \\frac1{R_1+R_2}\n  \\]\n  by\n  \\[\n  \\frac1{R_1+R_2}+\\frac1{R_L}.\n  \\]\n- The negative feedback reduces gain but improves gain stability and linearity and reduces output resistance.\n- Numerical bias, gain, bandwidth, and stability cannot be determined without \\(V_{DD}\\), resistor values, MOS parameters, the input DC level, source impedance, and capacitances.\n\nIf the arrow in the figure is intended to denote a pMOS rather than an nMOS, the DC current equation and operating-region inequalities must use \\(V_{SG}\\) and \\(|V_{TH}|\\); the divider factor and the fundamental feedback relationship remain the same.",
        "format": "markdown",
        "sha256": "c69cf3f78de42de669fb651c581977a03c0c6e176140c6c30804985c92637e69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. Its small-signal gain matches the golden result, including the high-loop-gain limit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1959,
        "input_tokens": 1960,
        "output_tokens": 27853,
        "total_tokens": 29813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1959,
        "input_tokens": 1960,
        "output_tokens": 27853,
        "total_tokens": 29813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nAssuming the arrowed lower terminal of \\(M_1\\) is its source, \\(M_1\\) is an NMOS operated as a **common-gate stage**:\n\n- Source: \\(V_{\\text{in}}\\)\n- Gate: feedback voltage \\(V_F\\)\n- Drain: \\(V_{\\text{out}}\\)\n- \\(R_D\\): drain load connected to \\(V_{DD}\\)\n- \\(R_1,R_2\\): output-to-gate feedback divider\n\nSince the MOS gate draws essentially no current,\n\n\\[\nV_F=\\beta V_{\\text{out}},\n\\qquad\n\\beta=\\frac{R_2}{R_1+R_2}.\n\\]\n\nThis is a common-gate amplifier with **negative voltage feedback**.\n\nFor example, if \\(V_{\\text{in}}\\) rises, \\(I_D\\) initially decreases and \\(V_{\\text{out}}\\) rises. The divider then raises \\(V_F\\), which increases \\(I_D\\) and opposes the original output change.\n\n---\n\n## 2. DC bias\n\nLet\n\n\\[\nR_\\Sigma=R_1+R_2.\n\\]\n\nThe divider draws current from the output node, so the exact output-node equation is\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_D}\n=\nI_D+\\frac{V_{\\text{out}}}{R_\\Sigma}.\n\\]\n\nTherefore,\n\n\\[\nI_D=\n\\frac{V_{DD}-\\left(1+\\frac{R_D}{R_\\Sigma}\\right)V_{\\text{out}}}{R_D}.\n\\]\n\nFor an enhancement NMOS in saturation, neglecting channel-length modulation,\n\n\\[\nI_D=\\frac{k_n}{2}(V_{GS}-V_{TN})^2,\n\\]\n\nwhere\n\n\\[\nV_{GS}=V_F-V_{\\text{in}}\n=\\beta V_{\\text{out}}-V_{\\text{in}}.\n\\]\n\nThus the bias point is found from\n\n\\[\n\\boxed{\n\\frac{k_n}{2}\n\\left(\\beta V_{\\text{out}}-V_{\\text{in}}-V_{TN}\\right)^2\n=\n\\frac{V_{DD}-\\left(1+\\frac{R_D}{R_\\Sigma}\\right)V_{\\text{out}}}{R_D}\n}\n\\]\n\nIf \\(R_1+R_2\\gg R_D\\), divider loading can be neglected and\n\n\\[\nV_{\\text{out}}\\approx V_{DD}-R_D I_D.\n\\]\n\nIf the transistor is off, then\n\n\\[\nV_{\\text{out}}=\nV_{DD}\\frac{R_1+R_2}{R_D+R_1+R_2},\n\\]\n\nand\n\n\\[\nV_F=\nV_{DD}\\frac{R_2}{R_D+R_1+R_2}.\n\\]\n\nThe transistor turns on when \\(V_F>V_{\\text{in}}+V_{TN}\\). For a conventional enhancement NMOS, the on-state solution is normally in saturation because\n\n\\[\nV_{DS}-(V_{GS}-V_{TN})\n=(1-\\beta)V_{\\text{out}}+V_{TN}>0.\n\\]\n\n---\n\n## 3. Small-signal voltage gain\n\nWith \\(V_{DD}\\) as AC ground,\n\n\\[\nv_F=\\beta v_{\\text{out}},\n\\qquad\nv_{gs}=\\beta v_{\\text{out}}-v_{\\text{in}}.\n\\]\n\nLet \\(r_o\\) be the transistor output resistance. KCL at the output gives\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}\n+\\frac{v_{\\text{out}}}{R_\\Sigma}\n+\\frac{v_{\\text{out}}-v_{\\text{in}}}{r_o}\n+g_m(\\beta v_{\\text{out}}-v_{\\text{in}})=0.\n\\]\n\nHence\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_m+g_o}\n{g_m\\beta+g_o+\\frac1{R_D}+\\frac1{R_\\Sigma}}\n}\n\\]\n\nwhere \\(g_o=1/r_o\\).\n\nIf \\(r_o\\) is large, this becomes\n\n\\[\n\\boxed{\nA_v\\approx\n\\frac{g_m}\n{g_m\\beta+\\frac1{R_D}+\\frac1{R_\\Sigma}}\n=\n\\frac{g_mR_X}{1+g_m\\beta R_X}\n}\n\\]\n\nwith\n\n\\[\nR_X=R_D\\parallel(R_1+R_2).\n\\]\n\nIf divider loading is negligible, \\(R_X\\approx R_D\\), giving\n\n\\[\nA_v\\approx\\frac{g_mR_D}{1+g_m\\beta R_D}.\n\\]\n\n---\n\n## 4. High-loop-gain result\n\nWhen\n\n\\[\ng_m\\beta R_X\\gg1,\n\\]\n\nthe closed-loop gain becomes approximately\n\n\\[\n\\boxed{\nA_v\\approx\\frac1\\beta\n=\\frac{R_1+R_2}{R_2}\n}\n\\]\n\nThus the gain is non-inverting and is primarily set by the feedback-divider ratio rather than by \\(g_m\\). For example, \\(R_1=R_2\\) gives an ideal gain of approximately \\(2\\).\n\nThe feedback also reduces the output resistance. With the input source set to zero,\n\n\\[\n\\boxed{\nR_{\\text{out}}\\approx\n\\frac{1}\n{g_m\\beta+g_o+\\frac1{R_D}+\\frac1{R_\\Sigma}}\n}\n\\]\n\nOverall, this circuit is a **feedback-stabilized common-gate voltage amplifier**, with a nominal closed-loop gain approaching \\((R_1+R_2)/R_2\\), provided the required output-voltage range and transistor operating conditions are satisfied.",
        "format": "markdown",
        "sha256": "763379d946a2ac6352b8e0377743ac2bc4487580f90c7130a5f29a649b434784"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, divider feedback to the gate, and negative feedback. Its small-signal gain and high-loop-gain limit agree with the golden solution; the additional bias and output-resistance discussion does not undermine the essential result.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1959,
        "input_tokens": 1960,
        "output_tokens": 19638,
        "total_tokens": 21598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18537,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1959,
        "input_tokens": 1960,
        "output_tokens": 19638,
        "total_tokens": 21598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18537,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nInterpreting both devices as NMOS transistors:\n\n- \\(M_1\\) has its drain at \\(V_{DD}\\), its source at \\(V_{out}\\), and its gate driven by \\(V_{in}\\). Therefore, \\(M_1\\) is a **common-drain stage (source follower)**.\n- \\(M_2\\) has its drain at \\(V_{out}\\), its source at ground, and its gate held at the dc bias \\(V_b\\). With \\(V_b\\) at ac ground, \\(M_2\\) acts as an **NMOS current-sink load**.\n\nThe stage is therefore a **non-inverting source-follower amplifier with an active current-source load**.\n\n---\n\n## 2. DC analysis\n\nDefine\n\n\\[\nV_{GS1}=V_{in}-V_{out},\\qquad V_{DS1}=V_{DD}-V_{out}\n\\]\n\nand\n\n\\[\nV_{GS2}=V_b,\\qquad V_{DS2}=V_{out}.\n\\]\n\nAt the output node,\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\left(\\frac WL\\right)_i.\n\\]\n\n### Normal bias region\n\nFor \\(M_2\\) to be on and saturated,\n\n\\[\nV_b>V_{TH2},\\qquad V_{out}\\ge V_b-V_{TH2}.\n\\]\n\nIts current is then approximately\n\n\\[\nI_Q=I_{D2}\\simeq \\frac{\\beta_2}{2}(V_b-V_{TH2})^2.\n\\]\n\nIf \\(M_1\\) is also saturated and channel-length modulation is neglected,\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_{GS1}-V_{TH1})^2=I_Q,\n\\]\n\nso\n\n\\[\nV_{GS1}=V_{TH1}+\\sqrt{\\frac{2I_Q}{\\beta_1}}.\n\\]\n\nConsequently,\n\n\\[\n\\boxed{V_{out}\\simeq V_{in}-V_{GS1}}\n\\]\n\nand, equivalently,\n\n\\[\n\\boxed{\nV_{out}\\simeq\nV_{in}-V_{TH1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{TH2})\n}\n\\]\n\nin the ideal square-law model. Thus the circuit is a level-shifting source follower: the output follows the input with a nearly constant \\(V_{GS1}\\) offset.\n\nWith channel-length modulation included, the dc value is obtained from\n\n\\[\n\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{TH1})^2\n\\left[1+\\lambda_1(V_{DD}-V_{out})\\right]\n=\n\\frac{\\beta_2}{2}(V_b-V_{TH2})^2\n(1+\\lambda_2V_{out}).\n\\]\n\nNote that \\(V_b-V_{TH2}\\) is the minimum \\(V_{DS}\\) required to keep \\(M_2\\) saturated; it does **not** directly set \\(V_{out}\\).\n\n---\n\n## 3. Small-signal gain\n\nTaking \\(V_{DD}\\) and \\(V_b\\) as ac grounds:\n\n- \\(M_1\\) is the source follower.\n- \\(M_2\\) has \\(v_{gs2}=0\\), so it contributes only its drain output conductance \\(g_{o2}=1/r_{o2}\\).\n\nThe voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{g_{m1}}{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nwhen body effect is neglected. Usually \\(g_{m1}\\gg g_{o1},g_{o2}\\), giving\n\n\\[\n\\boxed{A_v\\approx +1}.\n\\]\n\nThe gain is positive and slightly less than unity.\n\nIf the body of \\(M_1\\) is grounded, its source is at \\(V_{out}\\), so body effect is important:\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}.\n\\]\n\nFor an external load \\(R_L\\) at the output, add \\(1/R_L\\) to the denominator.\n\n---\n\n## 4. Input and output resistance\n\n- The MOS gate draws essentially no dc current, so\n\n  \\[\n  \\boxed{R_{in}\\rightarrow\\infty}\n  \\]\n\n  apart from capacitive effects.\n\n- With \\(V_{in}\\) set to ac ground, the output resistance is approximately\n\n  \\[\n  \\boxed{\n  R_{out}\\simeq\n  \\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n  \\approx \\frac{1}{g_{m1}}\n  }.\n  \\]\n\nThus the source follower substantially lowers the output resistance seen by \\(M_2\\).\n\n---\n\n## 5. Operating limits\n\nUseful conditions are:\n\n- \\(M_2\\) saturated:\n\n  \\[\n  V_{out}\\ge V_b-V_{TH2}.\n  \\]\n\n- \\(M_1\\) saturated:\n\n  \\[\n  V_{DD}-V_{out}\\ge V_{GS1}-V_{TH1}.\n  \\]\n\n- \\(M_1\\) on:\n\n  \\[\n  V_{in}-V_{out}>V_{TH1}.\n  \\]\n\n- \\(M_2\\) on:\n\n  \\[\n  V_b>V_{TH2}.\n  \\]\n\nFor low \\(V_{in}\\), \\(M_1\\) becomes weak or off and \\(M_2\\) pulls the output toward ground, generally placing \\(M_2\\) in the triode region. At high \\(V_{in}\\), \\(M_1\\) eventually loses drain headroom and enters the triode region, causing gain compression.\n\n### Overall behavior\n\n\\[\n\\boxed{\\text{Non-inverting, near-unity-gain voltage follower with a fixed dc level shift.}}\n\\]\n\nThe static current is set primarily by \\(V_b\\) and the size of \\(M_2\\), while the input-output offset is set by the required \\(V_{GS1}\\) of \\(M_1\\).",
        "format": "markdown",
        "sha256": "28316056e4c4febe26eb4f1699002ad39030c63f454185a97433a995ce426506"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-sink load, and gives a positive gain slightly below unity with appropriate body-effect and output-conductance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 198,
        "input_tokens": 1483,
        "output_tokens": 22841,
        "total_tokens": 24324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21582,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 198,
        "input_tokens": 1483,
        "output_tokens": 22841,
        "total_tokens": 24324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21582,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are enhancement-mode NMOS transistors and \\(V_b\\) is a fixed DC bias voltage:\n\n## 1. Circuit topology\n\n- \\(M_1\\): drain at \\(V_{DD}\\), gate at \\(V_{in}\\), source at \\(V_{out}\\).  \n  Thus, \\(M_1\\) is a **source follower (common-drain amplifier)**.\n- \\(M_2\\): drain at \\(V_{out}\\), gate at \\(V_b\\), source at ground.  \n  Thus, \\(M_2\\) is a **biased NMOS current sink**, serving as the load for \\(M_1\\).\n\nThe output is non-inverting: increasing \\(V_{in}\\) increases the current supplied by \\(M_1\\), which raises \\(V_{out}\\).\n\nAt DC, neglecting any external load,\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\n---\n\n## 2. Device operating regions\n\nLet\n\n\\[\nV_{GS1}=V_{in}-V_{out},\\qquad V_{DS1}=V_{DD}-V_{out},\n\\]\n\n\\[\nV_{GS2}=V_b,\\qquad V_{DS2}=V_{out}.\n\\]\n\nFor \\(M_1\\) to be in saturation,\n\n\\[\nV_{DS1}\\ge V_{GS1}-V_{T1}.\n\\]\n\nFor \\(M_2\\) to be in saturation,\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_{T2}\n\\quad\\Rightarrow\\quad\nV_{out}\\ge V_b-V_{T2}.\n\\]\n\nIf \\(V_b\\le V_{T2}\\), \\(M_2\\) is off and the circuit has no defined DC operating point in the ideal model.\n\n---\n\n## 3. DC voltage transfer\n\nLet\n\n\\[\n\\beta_i=k_n'(W/L)_i.\n\\]\n\nIf both transistors are in saturation and channel-length modulation and body effect are neglected,\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}(V_b-V_{T2})^2,\n\\]\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{T1})^2.\n\\]\n\nUsing \\(I_{D1}=I_{D2}\\),\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{in}-V_{T1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{T2})\n}\n\\]\n\nor, equivalently,\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS1}}\n\\]\n\nbecause \\(M_2\\) fixes the current and therefore fixes the required overdrive of \\(M_1\\).\n\nThus, in the region where \\(M_2\\) is saturated, the output follows the input with a nearly constant offset.\n\nFor a desired output and current \\(I\\), the bias voltages can be selected as\n\n\\[\nV_b=V_{T2}+\\sqrt{\\frac{2I}{\\beta_2}},\n\\]\n\n\\[\nV_{in}=V_{out}+V_{T1}+\\sqrt{\\frac{2I}{\\beta_1}}.\n\\]\n\nIf \\(M_2\\) enters the triode region, \\(0<V_{out}<V_b-V_{T2}\\), then\n\n\\[\nI_{D2}\n=\n\\beta_2\\left[(V_b-V_{T2})V_{out}-\\frac{V_{out}^2}{2}\\right],\n\\]\n\nand this expression must be equated to the current of \\(M_1\\) to obtain the nonlinear low-output portion of the transfer characteristic.\n\n---\n\n## 4. Small-signal voltage gain\n\nAt signal frequencies, \\(V_{DD}\\) and \\(V_b\\) are AC grounds. Since \\(M_2\\)'s gate and source are both AC-grounded, its \\(g_{m2}\\) does not contribute directly; it appears as an output conductance.\n\nFor \\(M_2\\) in saturation, define\n\n\\[\ng_{o1}=\\frac{1}{r_{o1}},\\qquad\ng_{o2}=\\frac{1}{r_{o2}}.\n\\]\n\nThe voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nassuming no body effect. Including body effect of \\(M_1\\),\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nFor ideal transistors with infinite output resistances,\n\n\\[\nA_v\\rightarrow 1.\n\\]\n\nTherefore, this circuit is a **unity-gain, non-inverting buffer stage** with very high input impedance.\n\nIf \\(M_2\\) is in triode, replace \\(g_{o2}\\) by its triode drain conductance,\n\n\\[\ng_{d2}=\\beta_2\\left[(V_b-V_{T2})-V_{out}\\right].\n\\]\n\nThe output resistance, with \\(V_{in}\\) AC-grounded, is approximately\n\n\\[\n\\boxed{\nR_{out}\\simeq\n\\frac{1}{g_{m1}+g_{o1}+g_{o2}}\n}\n\\]\n\nor with \\(g_{d2}\\) substituted when \\(M_2\\) is triode.\n\n---\n\n## 5. Output-range limitations\n\nFor both transistors to remain saturated,\n\n\\[\n\\boxed{V_b-V_{T2}\\le V_{out}\\le V_{DD}-V_{OV1}},\n\\]\n\nwhere\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_{D1}}{\\beta_1}}.\n\\]\n\nOperationally:\n\n- At low \\(V_{in}\\), \\(M_1\\) becomes weak or turns off and \\(M_2\\) pulls \\(V_{out}\\) toward ground.\n- As \\(V_{in}\\) rises, \\(M_2\\) may initially operate in triode.\n- Once \\(V_{out}>V_b-V_{T2}\\), \\(M_2\\) enters saturation and \\(V_{out}\\) tracks \\(V_{in}\\).\n- Near the upper limit, \\(M_1\\) loses drain-source headroom and the transfer characteristic compresses.\n\nOverall, the circuit is a **source-follower amplifier with an active current-sink load**, providing high input impedance, low output impedance, positive voltage gain slightly below unity, and a relatively wide usable output range.",
        "format": "markdown",
        "sha256": "f220a2c094a035dd695abfdf3d8531ef193c8b4bec1578228733295c05a2ece6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-sink load, and gives a positive gain slightly below unity with appropriate small-signal reasoning. Minor output-resistance imprecision does not affect the essential answer.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1482,
        "input_tokens": 1483,
        "output_tokens": 15281,
        "total_tokens": 16764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1482,
        "input_tokens": 1483,
        "output_tokens": 15281,
        "total_tokens": 16764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\n- \\(M_1\\) is an NMOS **source follower** (common-drain stage):\n  - drain at \\(V_{DD}\\)\n  - gate driven by \\(V_{in}\\)\n  - source produces \\(V_{out}\\)\n- \\(M_2\\) is an NMOS **current sink**, biased by \\(V_b\\).\n  - It sinks approximately constant bias current from the output node.\n\nThus, the circuit is a **non-inverting, level-shifting voltage buffer** with a very high input resistance.\n\n---\n\n## 2. DC bias\n\nLet\n\n\\[\n\\beta_i=\\mu_n C_{ox}\\left(\\frac WL\\right)_i\n\\]\n\nand initially neglect channel-length modulation and body effect.\n\nFor \\(M_2\\), assuming saturation,\n\n\\[\nI_B=I_{D2}=\\frac{\\beta_2}{2}(V_b-V_{TH2})^2\n\\]\n\nwith the saturation requirement\n\n\\[\nV_{out}\\ge V_{OV2}=V_b-V_{TH2}.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_{in}-V_{out}\n\\]\n\nand\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}\n\\left(V_{in}-V_{out}-V_{TH1}\\right)^2.\n\\]\n\nAt equilibrium, \\(I_{D1}=I_B\\), so\n\n\\[\nV_{OV1}=V_{GS1}-V_{TH1}\n=\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,(V_b-V_{TH2}).\n\\]\n\nThe quiescent relation is therefore\n\n\\[\nV_{in,Q}=V_{out,Q}+V_{TH1}+V_{OV1}.\n\\]\n\nFor good bias operation, \\(M_1\\) must also remain in saturation:\n\n\\[\nV_{DD}-V_{out}\\ge V_{OV1}.\n\\]\n\nHence the useful output range is approximately\n\n\\[\nV_{OV2}\\le V_{out}\\le V_{DD}-V_{OV1}.\n\\]\n\n---\n\n## 3. Voltage transfer characteristic\n\nWith an ideal constant-current \\(M_2\\), \\(I_{D1}\\) is fixed. Therefore \\(V_{GS1}\\) is essentially fixed, and\n\n\\[\n\\boxed{V_{out}\\approx V_{in}-V_{GS1,Q}}\n\\]\n\nwhere\n\n\\[\nV_{GS1,Q}=V_{TH1}+V_{OV1}.\n\\]\n\nEquivalently,\n\n\\[\nV_{out}\\approx\nV_{in}-V_{TH1}\n-\\sqrt{\\frac{\\beta_2}{\\beta_1}}(V_b-V_{TH2}).\n\\]\n\nThus:\n\n- the output follows the input with approximately unity slope;\n- the output is shifted downward by approximately \\(V_{GS1,Q}\\);\n- a positive change in \\(V_{in}\\) produces a positive change in \\(V_{out}\\).\n\nWith channel-length modulation included, the more general relation is obtained from\n\n\\[\n\\frac{\\beta_1}{2}(V_{in}-V_{out}-V_{TH1})^2\n\\left[1+\\lambda_1(V_{DD}-V_{out})\\right]\n=\n\\frac{\\beta_2}{2}(V_b-V_{TH2})^2\n\\left[1+\\lambda_2V_{out}\\right].\n\\]\n\n---\n\n## 4. Small-signal gain\n\nTaking \\(V_{DD}\\) and \\(V_b\\) as AC ground, \\(M_2\\) contributes only its output resistance \\(r_{o2}\\) at the output node. The small-signal voltage gain is\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}}\n{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nwhere \\(g_{mb1}\\) is included if the bulk of \\(M_1\\) is grounded and body effect is significant.\n\nIf body effect and transistor output resistances are neglected,\n\n\\[\n\\boxed{A_v\\approx 1}\n\\]\n\nwhich is the expected source-follower behavior.\n\nThe small-signal output resistance, with \\(V_{in}\\) grounded, is\n\n\\[\n\\boxed{\nR_{out}\\approx\n\\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n}\n\\]\n\nand the DC input resistance is extremely high because the MOS gate draws no current.\n\n---\n\n## 5. Limiting behavior\n\n- **Low \\(V_{in}\\):** \\(M_1\\) begins to turn off, and \\(M_2\\) pulls \\(V_{out}\\) downward.\n- **Output too low:** \\(M_2\\) enters the triode region rather than acting as a constant-current sink. Then\n  \\[\n  I_{D2}=\\beta_2\\left[(V_b-V_{TH2})V_{out}-\\frac{V_{out}^2}{2}\\right],\n  \\]\n  and the near-unity follower gain and linearity degrade.\n- **Output too high:** \\(M_1\\) loses drain-voltage headroom and eventually leaves saturation.\n- \\(V_b>V_{TH2}\\) is required for \\(M_2\\) to conduct.\n\n### Overall\n\nThe circuit is an NMOS source follower biased by a current-sink load. It provides a high-input-impedance, non-inverting buffer with approximately unity voltage gain, a downward DC level shift of about \\(V_{GS1}\\), and an output resistance of roughly \\(1/g_{m1}\\), neglecting body effect and channel-length modulation.",
        "format": "markdown",
        "sha256": "8ca9472ae37a530ab8bc017c64f4dcd7c34e9547c30d774de207fc416deac77f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as a current sink, and gives the positive, near-unity gain with body effect and output-resistance corrections. The bias and output-resistance analysis is also consistent with the topology.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1482,
        "input_tokens": 1483,
        "output_tokens": 13335,
        "total_tokens": 14818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1482,
        "input_tokens": 1483,
        "output_tokens": 13335,
        "total_tokens": 14818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThis is a **CMOS inverter**:\n\n- \\(M_2\\): pMOS pull-up device, source connected to \\(V_{DD}\\)\n- \\(M_1\\): NMOS pull-down device, source connected to ground\n- Both gates are driven by \\(V_{in}\\)\n- Both drains are connected to \\(V_{out}\\)\n\nTherefore, the Boolean function is\n\n\\[\n\\boxed{V_{out}=\\overline{V_{in}}}\n\\]\n\n## Logic operation\n\n| \\(V_{in}\\) | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, \\(0\\) | OFF | ON | \\(V_{DD}\\) |\n| High, \\(V_{DD}\\) | ON | OFF | \\(0\\) |\n\n- With \\(V_{in}=0\\), \\(V_{GS1}=0\\), so \\(M_1\\) is off. Since \\(M_2\\) is on, it charges the output to \\(V_{DD}\\).\n- With \\(V_{in}=V_{DD}\\), \\(M_2\\) has zero source-to-gate voltage and is off. \\(M_1\\) discharges the output to ground.\n\n## Analog voltage-transfer characteristic\n\nFor low input,\n\n\\[\nV_{out}\\approx V_{DD}\n\\]\n\nFor high input,\n\n\\[\nV_{out}\\approx 0\n\\]\n\nBetween the transistor thresholds, both devices may conduct and \\(V_{out}\\) changes rapidly with \\(V_{in}\\). The transition is approximately at the **switching threshold** \\(V_M\\), where\n\n\\[\nV_M \\approx V_{in}=V_{out}.\n\\]\n\nUsing the square-law model and assuming both transistors are saturated at the threshold,\n\n\\[\n\\frac{\\beta_1}{2}(V_M-V_{TN})^2\n=\n\\frac{\\beta_2}{2}(V_{DD}-V_M-|V_{TP}|)^2,\n\\]\n\nso\n\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_1}\\,V_{TN}\n+\\sqrt{\\beta_2}\\,(V_{DD}-|V_{TP}|)}\n{\\sqrt{\\beta_1}+\\sqrt{\\beta_2}}\n}\n\\]\n\nwhere\n\n\\[\n\\beta_i=\\mu_i C_{\\text{ox}}\\left(\\frac WL\\right)_i.\n\\]\n\nIf \\(\\beta_1=\\beta_2\\),\n\n\\[\nV_M=\\frac{V_{DD}+V_{TN}-|V_{TP}|}{2}.\n\\]\n\nThus, with matched threshold magnitudes, \\(V_M\\approx V_{DD}/2\\).\n\n## Current and power\n\n- In either stable logic state, there is ideally **no direct dc path from \\(V_{DD}\\) to ground**, so static power is ideally zero.\n- During a logic transition, both transistors can conduct simultaneously, producing a temporary **short-circuit or crowbar current**.\n- The short-circuit current is greatest near \\(V_M\\).\n- With a load capacitance \\(C_L\\), the average dynamic power is approximately\n\n\\[\nP_{\\text{dynamic}}=\\alpha C_L V_{DD}^2 f,\n\\]\n\nwhere \\(\\alpha\\) is the switching activity and \\(f\\) is the operating frequency.\n\n## Small-signal behavior\n\nNear the switching threshold, both devices are on and the inverter has a large negative voltage gain:\n\n\\[\nA_v \\approx\n-\\frac{g_{m1}+g_{m2}}{g_{o1}+g_{o2}},\n\\]\n\nwhere the pMOS transconductance is taken as a positive magnitude. If channel-length modulation is neglected, the gain is very large.\n\nIn summary, \\(M_2\\) provides the pull-up path, \\(M_1\\) provides the pull-down path, and the circuit performs high-to-low and low-to-high inversion with ideally zero static supply current in either settled logic state.",
        "format": "markdown",
        "sha256": "a55613e63f0ccf9d1e321bf229872c5a35f0452e03db39f4f803f640639ae9c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its NMOS pull-down and PMOS pull-up, and their operation. The added transfer, current, and small-signal analysis is consistent with the circuit.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 497,
        "output_tokens": 5423,
        "total_tokens": 5920,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 497,
        "output_tokens": 5423,
        "total_tokens": 5920,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4642,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe circuit is a **CMOS inverter**:\n\n- \\(M_1\\): n-channel MOSFET, acts as the **pull-down** device.\n- \\(M_2\\): p-channel MOSFET, acts as the **pull-up** device.\n- Their gates are connected to \\(V_{in}\\).\n- Their drains are connected to \\(V_{out}\\).\n\nTherefore,\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\nfor valid logic levels.\n\n## DC operation\n\n| \\(V_{in}\\) | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| Low, \\(0\\) | Off | On | High, \\(\\approx V_{DD}\\) |\n| High, \\(V_{DD}\\) | On | Off | Low, \\(\\approx 0\\) |\n\n### Low input\n\nWith \\(V_{in}=0\\):\n\n\\[\nV_{GS1}=0\n\\]\n\nso \\(M_1\\) is cut off. For \\(M_2\\),\n\n\\[\nV_{SG2}=V_{DD}\n\\]\n\nso \\(M_2\\) is strongly on and pulls \\(V_{out}\\) up to approximately \\(V_{DD}\\).\n\n### High input\n\nWith \\(V_{in}=V_{DD}\\):\n\n\\[\nV_{GS1}=V_{DD}\n\\]\n\nso \\(M_1\\) is strongly on and pulls \\(V_{out}\\) down to approximately \\(0\\). Meanwhile, \\(M_2\\) is off because its source-to-gate voltage is zero.\n\n## Voltage-transfer characteristic\n\nThe ideal transfer characteristic is approximately:\n\n```text\n Vout\n VDD ─────────────\n                \\\n                 \\\n                  \\\n                   \\________\n  0                         Vin\n       VIL       VM       VIH\n```\n\n- \\(V_{IL}\\): maximum input voltage still interpreted as logic 0.\n- \\(V_{IH}\\): minimum input voltage interpreted as logic 1.\n- \\(V_M\\): switching threshold, where \\(V_{in}=V_{out}\\).\n\nA useful approximation is\n\n\\[\nV_{IL}\\approx V_{TN}, \\qquad\nV_{IH}\\approx V_{DD}-|V_{TP}|.\n\\]\n\nUsing the square-law MOSFET model, the switching voltage is\n\n\\[\nV_M=\n\\frac{\\beta_n V_{TN}+\n\\beta_p\\left(V_{DD}-|V_{TP}|\\right)}\n{\\beta_n+\\beta_p},\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\left(\\frac WL\\right)_n,\n\\qquad\n\\beta_p=\\mu_p C_{ox}\\left(\\frac WL\\right)_p.\n\\]\n\nFor matched strengths, \\(\\beta_n=\\beta_p\\),\n\n\\[\nV_M\\approx\n\\frac{V_{DD}+V_{TN}-|V_{TP}|}{2}.\n\\]\n\nThus \\(V_M\\) is usually close to \\(V_{DD}/2\\).\n\n## Operation during a transition\n\nWhen \\(V_{in}\\) is near \\(V_M\\), both transistors may conduct. A temporary path exists from \\(V_{DD}\\) through \\(M_2\\), through \\(M_1\\), to ground. This produces **short-circuit current**, although it exists only while the input is changing.\n\n- A rising input discharges the output load through \\(M_1\\).\n- A falling input charges the output load through \\(M_2\\).\n\n## Delay and sizing\n\nApproximate 50%-to-50% propagation delays are\n\n\\[\nt_{pHL}\\approx 0.69\\,R_{\\text{on},n}C_L,\n\\qquad\nt_{pLH}\\approx 0.69\\,R_{\\text{on},p}C_L.\n\\]\n\nTo obtain similar pull-up and pull-down strengths,\n\n\\[\n\\mu_n\\left(\\frac WL\\right)_n\n\\approx\n\\mu_p\\left(\\frac WL\\right)_p.\n\\]\n\nBecause hole mobility is typically \\(2\\)–\\(3\\) times lower than electron mobility, the PMOS is commonly made about \\(2\\)–\\(3\\) times wider than the NMOS for comparable drive strength.\n\n## Power\n\n- **Static power:** Ideally nearly zero in either stable logic state; practically limited by leakage.\n- **Dynamic power:**\n\n\\[\nP_{\\text{dynamic}}\\approx \\alpha C_L V_{DD}^{2}f,\n\\]\n\nwhere \\(\\alpha\\) is the switching activity.\n- **Short-circuit power:** Caused by both transistors conducting during input transitions.\n\nIn summary, the circuit is an efficient CMOS inverter whose output is the logical complement of its input.",
        "format": "markdown",
        "sha256": "319ca6616cd31eedd6bd89118919074dcc5d1241991f0ee9b443f3accbcf951d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and logic-level operation. The extra analog details are optional and do not undermine the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 497,
        "output_tokens": 5548,
        "total_tokens": 6045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 497,
        "output_tokens": 5548,
        "total_tokens": 6045,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe circuit is a **CMOS inverter**:\n\n- \\(M_1\\): n-channel MOSFET, source at ground\n- \\(M_2\\): p-channel MOSFET, source at \\(V_{DD}\\)\n- Both gates are connected to \\(V_{in}\\)\n- Their drains are connected to \\(V_{out}\\)\n\nAssuming the transistor bulks are tied to their respective sources, the operation is complementary.\n\n## Logic operation\n\n| Input | \\(M_1\\) (nMOS) | \\(M_2\\) (pMOS) | Output |\n|---|---|---|---|\n| \\(V_{in}=0\\) | Off | On | \\(V_{out}\\approx V_{DD}\\) |\n| \\(V_{in}=V_{DD}\\) | On | Off | \\(V_{out}\\approx 0\\) |\n\n### When \\(V_{in}\\) is low\n\n- \\(V_{GS1}=0\\), so \\(M_1\\) is cut off.\n- \\(V_{SG2}=V_{DD}\\), so \\(M_2\\) is turned on.\n- Current flows from \\(V_{DD}\\) through \\(M_2\\) to the output, raising \\(V_{out}\\) to approximately \\(V_{DD}\\).\n\n### When \\(V_{in}\\) is high\n\n- \\(M_1\\) has \\(V_{GS1}=V_{DD}\\) and is turned on.\n- \\(M_2\\) has \\(V_{SG2}=0\\) and is cut off.\n- \\(M_1\\) discharges the output to approximately \\(0\\text{ V}\\).\n\nThus,\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\nand the truth table is:\n\n\\[\n\\begin{array}{c|c}\nV_{in} & V_{out}\\\\ \\hline\n0 & 1\\\\\n1 & 0\n\\end{array}\n\\]\n\n## Transfer characteristic\n\nThe voltage-transfer characteristic is approximately:\n\n- \\(V_{out}=V_{DD}\\) for low input voltages\n- \\(V_{out}=0\\) for high input voltages\n- A steep, negative-slope transition near the switching threshold \\(V_M\\)\n\nAround \\(V_M\\), both transistors conduct and the circuit has high voltage gain. This makes it a useful digital inverter, although it is not normally operated as a linear amplifier.\n\nUsing the square-law model and neglecting channel-length modulation, \\(V_M\\) is found from\n\n\\[\nI_{Dn}=I_{Dp},\n\\]\n\nwhere\n\n\\[\nI_{Dn}=\\frac{\\beta_n}{2}(V_M-V_{TN})^2,\n\\qquad\nI_{Dp}=\\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{TP}|)^2.\n\\]\n\nTherefore,\n\n\\[\nV_M=\n\\frac{\n\\sqrt{\\beta_n}V_{TN}\n+\n\\sqrt{\\beta_p}(V_{DD}-|V_{TP}|)\n}{\n\\sqrt{\\beta_n}+\\sqrt{\\beta_p}\n}.\n\\]\n\nIf the devices are perfectly balanced and \\(V_{TN}=|V_{TP}|\\), then \\(V_M\\approx V_{DD}/2\\). In practice, the threshold depends strongly on the transistor sizes and process parameters.\n\n## Electrical characteristics\n\n- **Static power:** Ideally zero when the output is settled, because one transistor is off. Real circuits consume leakage power.\n- **Dynamic power:** During switching, both transistors may conduct briefly, producing a short-circuit current from \\(V_{DD}\\) to ground.\n- **Charging and discharging:**  \n  - Output rise is controlled mainly by \\(M_2\\) and the load capacitance.  \n  - Output fall is controlled mainly by \\(M_1\\) and the load capacitance.\n- **Input current:** Ideally zero DC input current; the input mainly sees transistor gate capacitance.\n- **Noise margins:** The input ranges \\(V_{IL}\\le V_{in}\\le V_{IH}\\) are uncertain, while outputs are typically close to \\(V_{DD}\\) or \\(0\\text{ V}\\).\n\nSince electron mobility is usually about \\(2\\)–\\(3\\) times greater than hole mobility, the pMOS is commonly made wider than the nMOS so that rise and fall times are reasonably balanced.",
        "format": "markdown",
        "sha256": "f7d9779e4fe01b696373a458cef3b1a159d167e5f6c5eb4ebe9dab2d2cabc503"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and complementary operation. The additional analysis is consistent with the circuit; no essential errors are present.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 497,
        "output_tokens": 3842,
        "total_tokens": 4339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 384,
        "input_tokens": 497,
        "output_tokens": 3842,
        "total_tokens": 4339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nAssuming \\(M_1\\) is a p-channel MOSFET and \\(M_2\\) is an n-channel MOSFET, the circuit is a **CMOS inverter**:\n\n- \\(M_1\\): source at \\(V_{DD}\\), drain at \\(V_{out}\\)\n- \\(M_2\\): drain at \\(V_{out}\\), source at ground\n- Both gates are connected to \\(V_{in}\\)\n\nIts Boolean function is\n\n\\[\nV_{out}=\\overline{V_{in}}.\n\\]\n\n## 2. DC operation\n\n| Input | \\(M_1\\) (PMOS) | \\(M_2\\) (NMOS) | Output |\n|---|---|---|---|\n| \\(V_{in}=0\\) | On | Off | \\(V_{out}\\approx V_{DD}\\) |\n| \\(V_{in}=V_{DD}\\) | Off | On | \\(V_{out}\\approx 0\\) |\n| Intermediate value | Potentially on | Potentially on | Analog transition region |\n\n### Low input\n\nWith \\(V_{in}=0\\),\n\n\\[\nV_{SG1}=V_{DD}, \\qquad V_{GS2}=0.\n\\]\n\nThus \\(M_1\\) acts as a pull-up resistor and \\(M_2\\) is cut off. The output capacitance is charged to approximately \\(V_{DD}\\).\n\n### High input\n\nWith \\(V_{in}=V_{DD}\\),\n\n\\[\nV_{SG1}=0,\\qquad V_{GS2}=V_{DD}.\n\\]\n\nThus \\(M_1\\) is cut off and \\(M_2\\) acts as a pull-down resistor, discharging the output to approximately \\(0\\).\n\nIdeally, there is no dc path from \\(V_{DD}\\) to ground in either stable logic state, so static power consumption is ideally zero.\n\n## 3. Voltage-transfer characteristic\n\nThe output remains high for low inputs and low for high inputs, with a sharp transition near the inverter switching threshold.\n\nUsing the square-law model, when both devices are saturated near the switching point,\n\n\\[\nI_{D2}=\\frac{\\beta_n}{2}(V_{in}-V_{TN})^2,\n\\]\n\n\\[\nI_{D1}=\\frac{\\beta_p}{2}(V_{DD}-V_{in}-|V_{TP}|)^2,\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\left(\\frac WL\\right)_n,\\qquad\n\\beta_p=\\mu_p C_{ox}\\left(\\frac WL\\right)_p.\n\\]\n\nAt the switching threshold \\(V_M\\), the currents are approximately equal, giving\n\n\\[\nV_M=\n\\frac{V_{TN}+r( V_{DD}-|V_{TP}|)}\n{1+r},\n\\qquad\nr=\\sqrt{\\frac{\\beta_p}{\\beta_n}}.\n\\]\n\nFor matched thresholds and matched drive strengths, \\(\\beta_p=\\beta_n\\), and therefore\n\n\\[\nV_M=\\frac{V_{DD}}{2}.\n\\]\n\nBecause \\(\\mu_n\\) is normally about two to three times \\(\\mu_p\\), the PMOS is commonly made two to three times wider than the NMOS to obtain approximately equal pull-up and pull-down capability.\n\nApproximate logic levels and noise margins are\n\n\\[\nV_{OL}\\approx 0,\\qquad V_{OH}\\approx V_{DD},\n\\]\n\n\\[\nV_{IL}\\approx V_{TN},\\qquad\nV_{IH}\\approx V_{DD}-|V_{TP}|.\n\\]\n\n## 4. Switching behavior\n\nFor a load capacitance \\(C_L\\), the first-order propagation delays are\n\n\\[\nt_{pHL}\\approx 0.69\\,R_{on,n}C_L,\n\\qquad\nt_{pLH}\\approx 0.69\\,R_{on,p}C_L,\n\\]\n\nwith approximate effective resistances\n\n\\[\nR_{on,n}\\approx\n\\frac{1}{\\beta_n(V_{DD}-V_{TN})},\n\\]\n\n\\[\nR_{on,p}\\approx\n\\frac{1}{\\beta_p(V_{DD}-|V_{TP}|)}.\n\\]\n\nThe average propagation delay is\n\n\\[\nt_p=\\frac{t_{pHL}+t_{pLH}}{2}.\n\\]\n\n## 5. Power consumption\n\nThe inverter has three principal power components:\n\n- **Static leakage:** ideally zero, but nonzero in a real transistor.\n- **Short-circuit power:** while both transistors conduct during the input transition, a direct current path exists from \\(V_{DD}\\) through \\(M_1\\), \\(V_{out}\\), and \\(M_2\\) to ground.\n- **Dynamic power:** caused by charging and discharging the load capacitance,\n\n\\[\nP_{\\text{dynamic}}\\approx \\alpha C_L V_{DD}^2 f,\n\\]\n\nwhere \\(\\alpha\\) is the activity factor and \\(f\\) is the switching frequency.\n\nThus, the circuit is a low-static-power digital inverter with rail-to-rail output and a high-gain transition region.",
        "format": "markdown",
        "sha256": "09b5caa8e1047acaaa34c2d1312ac26522a13f59f79ebd811a51f3ca01e5f88d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires identifying both devices as NMOS; such a topology error receives 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 512,
        "output_tokens": 5986,
        "total_tokens": 6498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 512,
        "output_tokens": 5986,
        "total_tokens": 6498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nInterpreting \\(M_1\\) as the upper pMOS and \\(M_2\\) as the lower nMOS, the circuit is a **CMOS inverter**:\n\n- \\(M_1\\): source at \\(V_{DD}\\), drain at \\(V_{\\text{out}}\\), gate at \\(V_{\\text{in}}\\)\n- \\(M_2\\): source at ground, drain at \\(V_{\\text{out}}\\), gate at \\(V_{\\text{in}}\\)\n\nTherefore,\n\n\\[\n\\boxed{V_{\\text{out}}=\\overline{V_{\\text{in}}}}\n\\]\n\n## Logic operation\n\n| Input \\(V_{\\text{in}}\\) | \\(M_1\\) (pMOS) | \\(M_2\\) (nMOS) | Output \\(V_{\\text{out}}\\) |\n|---|---|---|---|\n| Low | ON | OFF | \\(V_{DD}\\) |\n| High | OFF | ON | \\(0\\) |\n\n- For \\(V_{\\text{in}}=0\\), \\(V_{SG1}=V_{DD}\\), so \\(M_1\\) is on and charges the output to \\(V_{DD}\\).\n- For \\(V_{\\text{in}}=V_{DD}\\), \\(V_{GS2}=V_{DD}\\), so \\(M_2\\) is on and discharges the output to ground.\n- During the input transition, both transistors may conduct simultaneously, creating a temporary current path from \\(V_{DD}\\) through \\(M_1\\), \\(M_2\\), and ground.\n\n## Voltage-transfer characteristic\n\nThe output is high for low inputs and low for high inputs, with a sharp transition near the switching voltage \\(V_M\\).\n\nAt the switching point,\n\n\\[\nV_M=V_{\\text{out}}\n\\]\n\nand both devices are normally in saturation. Their currents are equal:\n\n\\[\n\\beta_p\\left(V_{DD}-V_M-|V_{tp}|\\right)^2\n=\n\\beta_n\\left(V_M-V_{tn}\\right)^2\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_n,\n\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}\\left(\\frac WL\\right)_p.\n\\]\n\nThus,\n\n\\[\n\\boxed{\nV_M=\n\\frac{\\sqrt{\\beta_p}\\left(V_{DD}-|V_{tp}|\\right)\n+\\sqrt{\\beta_n}V_{tn}}\n{\\sqrt{\\beta_p}+\\sqrt{\\beta_n}}\n}\n\\]\n\nFor matched devices with \\(\\beta_n=\\beta_p\\) and \\(V_{tn}=|V_{tp}|\\),\n\n\\[\n\\boxed{V_M=\\frac{V_{DD}}{2}}\n\\]\n\nA relatively stronger nMOS moves the switching point lower; a relatively stronger pMOS moves it higher.\n\n## Power and speed\n\nIn the stable logic states, one transistor is off, so ideal static power consumption is nearly zero. During switching, power is mainly\n\n\\[\nP_{\\text{dynamic}}=\\alpha C_L V_{DD}^2 f,\n\\]\n\nwhere \\(\\alpha\\) is the activity factor, \\(C_L\\) is the load capacitance, and \\(f\\) is the operating frequency. There are also short-circuit power during transitions and leakage power.\n\nApproximate propagation delays are\n\n\\[\nt_{pHL}\\approx 0.69\\,R_{\\text{on},n}C_L,\n\\qquad\nt_{pLH}\\approx 0.69\\,R_{\\text{on},p}C_L.\n\\]\n\nHence this topology provides rail-to-rail output, high input impedance, low static power, and potentially high speed.",
        "format": "markdown",
        "sha256": "fab3ddf1e457b49c86c7ddd9d391c68b5623685409e13dde3841e04d9a27c44a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as a pMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution explicitly requires identifying both devices as NMOS; this topology error receives 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 511,
        "input_tokens": 512,
        "output_tokens": 4350,
        "total_tokens": 4862,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 511,
        "input_tokens": 512,
        "output_tokens": 4350,
        "total_tokens": 4862,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Identification\n\nAssuming \\(M_1\\) is a p-channel MOSFET and \\(M_2\\) is an n-channel MOSFET, the circuit is a **CMOS inverter**:\n\n- \\(M_1\\): source at \\(V_{DD}\\), drain at \\(V_{out}\\)\n- \\(M_2\\): source at ground, drain at \\(V_{out}\\)\n- Both gates are driven by \\(V_{in}\\)\n\n## DC operation\n\n| Input condition | \\(M_1\\) (PMOS) | \\(M_2\\) (NMOS) | Output |\n|---|---|---|---|\n| \\(V_{in}<V_{TN}\\) | ON | OFF | \\(V_{out}\\approx V_{DD}\\) |\n| \\(V_{TN}<V_{in}<V_{DD}-|V_{TP}|\\) | ON | ON | Analog transition region |\n| \\(V_{in}>V_{DD}-|V_{TP}|\\) | OFF | ON | \\(V_{out}\\approx 0\\) |\n\nThus,\n\n\\[\nV_{in}=0 \\quad\\Rightarrow\\quad V_{out}=1\n\\]\n\n\\[\nV_{in}=1 \\quad\\Rightarrow\\quad V_{out}=0\n\\]\n\nso the circuit performs logical inversion.\n\n- For a low input, \\(M_1\\) charges the output toward \\(V_{DD}\\), while \\(M_2\\) provides no path to ground.\n- For a high input, \\(M_2\\) discharges the output toward ground, while \\(M_1\\) is off.\n- During the transition, both transistors conduct, creating a temporary current path from \\(V_{DD}\\) to ground.\n\n## Voltage-transfer characteristic\n\nAs \\(V_{in}\\) rises:\n\n- The NMOS pull-down strength increases.\n- The PMOS pull-up strength decreases.\n- Therefore \\(V_{out}\\) decreases, giving a negative voltage gain.\n\nIn the region where both devices are saturated,\n\n\\[\n\\frac{1}{2}\\beta_n(V_{in}-V_{TN})^2\n=\n\\frac{1}{2}\\beta_p(V_{DD}-V_{in}-|V_{TP}|)^2\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{ox}\\frac{W_n}{L_n},\n\\qquad\n\\beta_p=\\mu_p C_{ox}\\frac{W_p}{L_p}.\n\\]\n\nThe switching threshold, defined by \\(V_{in}=V_{out}=V_M\\), is therefore\n\n\\[\n\\boxed{\nV_M=\nV_{TN}+\n\\left(V_{DD}-V_{TN}-|V_{TP}|\\right)\n\\frac{\\sqrt{\\beta_p}}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n}\n\\]\n\nFor matched strengths and equal threshold magnitudes,\n\n\\[\nV_M \\approx \\frac{V_{DD}}{2}.\n\\]\n\nBecause hole mobility is normally lower than electron mobility, \\(M_1\\) is often made wider so that rise and fall times are reasonably comparable.\n\n## Gain, power, and loading\n\n- The inverter has high gain near the switching threshold and low gain near the logic levels.\n- The MOSFET gates draw essentially no DC current, so the input impedance is very high.\n- In either stable logic state there is ideally no DC path from \\(V_{DD}\\) to ground; power consumption is mainly leakage.\n- During transitions there is short-circuit current through both transistors.\n- With a capacitive load \\(C_L\\), the dynamic power is approximately\n\n\\[\nP_{\\text{dynamic}}\\approx \\alpha C_L V_{DD}^{2}f,\n\\]\n\nwhere \\(\\alpha\\) is the transition activity factor.\n\nThus, the circuit is the fundamental CMOS logic inverter, also usable as a logic buffer, level shifter, or small-signal inverting amplifier.",
        "format": "markdown",
        "sha256": "b2693d047182c2907aacd66769402abdcb8f1469e848a0b3fc0df6d31b1270e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper transistor as PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so the required device-identification gate assigns 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 511,
        "input_tokens": 512,
        "output_tokens": 10745,
        "total_tokens": 11257,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 511,
        "input_tokens": 512,
        "output_tokens": 10745,
        "total_tokens": 11257,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9994,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\n- \\(M_1\\) is an **NMOS pull-down transistor**:\n  - gate: \\(V_{\\text{in}}\\)\n  - source: ground\n  - drain: \\(V_{\\text{out}}\\)\n- \\(M_2\\) is a **PMOS** whose gate and drain are shorted to \\(V_{\\text{out}}\\), so it is **diode-connected**.\n  - source: \\(V_{DD}\\)\n\nThus, this is an **NMOS inverter with a diode-connected PMOS active load**. It is not a conventional CMOS inverter because the PMOS gate is controlled by the output rather than by \\(V_{\\text{in}}\\).\n\n---\n\n## 2. Device currents\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac{W_n}{L_n},\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}\\frac{W_p}{L_p},\n\\]\n\nand define\n\n\\[\nr=\\sqrt{\\frac{\\beta_n}{\\beta_p}},\\qquad\nV_X=V_{DD}-|V_{TP}|.\n\\]\n\nFor the PMOS,\n\n\\[\nV_{SG2}=V_{DD}-V_{\\text{out}},\n\\]\n\nand, whenever it conducts, diode connection forces it into saturation:\n\n\\[\nI_{D2}=\\frac{\\beta_p}{2}\n\\left(V_{DD}-V_{\\text{out}}-|V_{TP}|\\right)^2.\n\\]\n\nFor \\(M_1\\):\n\n- Cutoff, \\(V_{\\text{in}}\\le V_{TN}\\)\n- Saturation, \\(V_{\\text{out}}\\ge V_{\\text{in}}-V_{TN}\\):\n\n\\[\nI_{D1}=\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{TN})^2\n\\]\n\n- Triode, \\(V_{\\text{out}}<V_{\\text{in}}-V_{TN}\\):\n\n\\[\nI_{D1}=\\beta_n\n\\left[(V_{\\text{in}}-V_{TN})V_{\\text{out}}\n-\\frac{V_{\\text{out}}^2}{2}\\right].\n\\]\n\nIn steady state,\n\n\\[\nI_{D1}=I_{D2}.\n\\]\n\n---\n\n## 3. Voltage-transfer behavior\n\n### Low input\n\nFor \\(V_{\\text{in}}\\le V_{TN}\\), \\(M_1\\) is off and there is no dc path to ground. The output is therefore logic HIGH.\n\nBecause \\(M_2\\) is diode-connected, it stops sourcing current when\n\n\\[\nV_{SG2}=|V_{TP}|,\n\\]\n\nor\n\n\\[\nV_{\\text{out}}\\approx V_{DD}-|V_{TP}|.\n\\]\n\nThus, starting from a low output, the ideal square-law model gives a degraded high level near \\(V_{DD}-|V_{TP}|\\), rather than exactly \\(V_{DD}\\). In a physical circuit, leakage and subthreshold conduction can move this level closer to \\(V_{DD}\\).\n\n### \\(M_1\\) saturated\n\nWhen both transistors are saturated,\n\n\\[\n\\frac{\\beta_n}{2}(V_{\\text{in}}-V_{TN})^2\n=\n\\frac{\\beta_p}{2}\n(V_{DD}-V_{\\text{out}}-|V_{TP}|)^2.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP}|\n-r(V_{\\text{in}}-V_{TN})\n}\n\\]\n\nand the transfer characteristic is approximately linear in this region.\n\nThis region ends when\n\n\\[\nV_{\\text{out}}=V_{\\text{in}}-V_{TN},\n\\]\n\nwhich occurs at\n\n\\[\nV_{\\text{in}}\n=\nV_{TN}+\n\\frac{V_{DD}-|V_{TP}|}{1+r}.\n\\]\n\n### \\(M_1\\) in triode\n\nAt larger inputs, \\(V_{\\text{out}}\\) becomes low and \\(M_1\\) enters the triode region. The dc equation is\n\n\\[\n\\beta_n\n\\left[(V_{\\text{in}}-V_{TN})V_{\\text{out}}\n-\\frac{V_{\\text{out}}^2}{2}\\right]\n=\n\\frac{\\beta_p}{2}\n(V_X-V_{\\text{out}})^2.\n\\]\n\nWith \\(x=V_{\\text{in}}-V_{TN}\\), the physical solution is\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\n\\frac{\nr^2x+V_X-\n\\sqrt{(r^2x+V_X)^2-(r^2+1)V_X^2}\n}{\nr^2+1\n}\n}\n\\]\n\nAt high input, \\(V_{\\text{out}}\\) approaches a nonzero low level set by the balance between \\(M_1\\) and \\(M_2\\). Consequently, this circuit is generally **not rail-to-rail**.\n\n---\n\n## 4. Logic threshold\n\nSetting \\(V_{\\text{in}}=V_{\\text{out}}=V_M\\) gives the input-output switching point:\n\n\\[\n\\boxed{\nV_M=\n\\frac{\nV_{DD}-|V_{TP}|+rV_{TN}\n}{\n1+r\n}\n}\n\\]\n\nThis is a useful reference for logic-level analysis, although the actual noise margins must be obtained from the complete nonlinear transfer curve.\n\n---\n\n## 5. Small-signal gain\n\nWhile \\(M_1\\) is saturated, neglecting channel-length modulation,\n\n\\[\nA_v=\\frac{\\partial V_{\\text{out}}}{\\partial V_{\\text{in}}}\n\\approx-r\n=\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}.\n\\]\n\nIncluding channel-length modulation,\n\n\\[\nA_v\\approx\n-\\frac{g_{m1}}\n{g_{m2}+g_{o1}+g_{o2}},\n\\]\n\nwhere \\(g_{m2}\\) appears because \\(M_2\\) is diode-connected. The negative sign confirms inversion.\n\n---\n\n## 6. Practical characteristics\n\n- Low input: ideally negligible static power.\n- High input: a dc current flows from \\(V_{DD}\\) through \\(M_2\\) and \\(M_1\\) to ground.\n- The output HIGH may be degraded by approximately \\(|V_{TP}|\\).\n- The output LOW is generally above ground and is determined by device sizing.\n- Making \\(M_1\\) stronger relative to \\(M_2\\) lowers the output LOW and increases the magnitude of the small-signal gain.\n- The diode-connected PMOS provides feedback and current stabilization, but the circuit is slower and less rail-to-rail than a conventional complementary CMOS inverter.\n\nIn short, the circuit functions as an inverting amplifier/inverter, with its transfer characteristic, switching threshold, and output levels determined primarily by \\(V_{DD}\\), the threshold voltages, and the \\(W/L\\) ratio of \\(M_1\\) to \\(M_2\\).",
        "format": "markdown",
        "sha256": "94740f8d505207820c11e25f56f79a4c3a1095ceb5ca22166b6179bdb64efdb2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain including channel-length modulation for both devices.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 980,
        "output_tokens": 14967,
        "total_tokens": 15947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 980,
        "output_tokens": 14967,
        "total_tokens": 15947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) is an nMOS and \\(M_2\\) is a pMOS, this is a **common-source NMOS amplifier with a diode-connected PMOS load**. It is not a conventional CMOS inverter because the gate of \\(M_2\\) is connected to the output rather than to \\(V_{in}\\).\n\n## 1. DC operation\n\nFor \\(M_2\\),\n\n\\[\nV_{G2}=V_{D2}=V_{\\text{out}},\\qquad V_{S2}=V_{DD},\n\\]\n\nso it is diode-connected. Whenever it is on, it is in saturation because\n\n\\[\nV_{SD2}=V_{SG2}.\n\\]\n\nUsing long-channel square-law equations, define\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_1,\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}\\left(\\frac WL\\right)_2,\n\\]\n\nand let \\(V_{TP}=|V_{tp}|\\).\n\nIf \\(M_1\\) is saturated,\n\n\\[\nI_{D1}=\\frac{1}{2}\\beta_n(V_{in}-V_{tn})^2,\n\\]\n\nwhile the diode-connected PMOS supplies\n\n\\[\nI_{D2}=\\frac{1}{2}\\beta_p\n\\left(V_{DD}-V_{\\text{out}}-V_{TP}\\right)^2.\n\\]\n\nAt the operating point \\(I_{D1}=I_{D2}\\). Therefore,\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-V_{TP}\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,(V_{in}-V_{tn})\n}\n\\]\n\nfor the region in which \\(M_1\\) is saturated and \\(M_2\\) is conducting.\n\nThus the stage is **inverting**: increasing \\(V_{in}\\) increases the current through \\(M_1\\), pulling \\(V_{\\text{out}}\\) downward.\n\nThe saturation requirement for \\(M_1\\) is\n\n\\[\nV_{\\text{out}}\\ge V_{in}-V_{tn},\n\\]\n\nor equivalently,\n\n\\[\nV_{in}\\le\nV_{tn}+\n\\frac{V_{DD}-V_{TP}}\n{1+\\sqrt{\\beta_n/\\beta_p}}.\n\\]\n\nFor larger \\(V_{in}\\), \\(M_1\\) enters the triode region and \\(V_{\\text{out}}\\) is pulled toward ground.\n\n## 2. Small-signal voltage gain\n\nAt signal frequencies \\(V_{DD}\\) is AC ground. A diode-connected transistor has a small-signal drain resistance of approximately\n\n\\[\n\\frac{1}{g_m+g_o}.\n\\]\n\nThus the output resistance of the stage is approximately\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=\n\\frac{1}{g_{m2}+g_{o1}+g_{o2}}\n}\n\\]\n\nwhere \\(g_{o1}=1/r_{o1}\\) and \\(g_{o2}=1/r_{o2}\\). If the PMOS body is not tied to its source, \\(g_{mb2}\\) must also be added.\n\nThe voltage gain is\n\n\\[\n\\boxed{\nA_v=\n\\frac{v_{\\text{out}}}{v_{in}}\n=\n-\\frac{g_{m1}}\n{g_{m2}+g_{o1}+g_{o2}}\n}\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\ng_{m1}=\\beta_n V_{OV1},\\qquad\ng_{m2}=\\beta_p V_{OV2},\n\\]\n\nand since both transistors carry the same current,\n\n\\[\n\\frac{g_{m1}}{g_{m2}}\n=\n\\sqrt{\\frac{\\beta_n}{\\beta_p}}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v\\approx-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n}\n\\]\n\nwhich agrees with the slope of the DC transfer characteristic. For \\(\\beta_n=\\beta_p\\), the stage has approximately unity inversion.\n\n## 3. Overall behavior\n\n- \\(V_{in}\\) low: \\(M_1\\) is off and \\(V_{\\text{out}}\\) approaches \\(V_{DD}\\).\n- Moderate \\(V_{in}\\): \\(M_1\\) is saturated, giving approximately linear inverting behavior.\n- High \\(V_{in}\\): \\(M_1\\) enters triode and \\(V_{\\text{out}}\\) falls toward \\(0\\).\n- Input resistance is very high because both devices are MOS gated inputs.\n- The finite output resistance is mainly set by the diode-connected PMOS, approximately \\(1/g_{m2}\\).\n\nIn summary, the circuit is an **inverting common-source amplifier with an active diode-connected PMOS load**, with ideal voltage gain\n\n\\[\n\\boxed{A_v\\simeq-\\sqrt{\\mu_n(W/L)_1/\\left[\\mu_p(W/L)_2\\right]}}.\n\\]",
        "format": "markdown",
        "sha256": "dfddc9cc3edbfcffe0e0c1a7f668e772a820afa66573ba9c8fcf6a5ebb2c19ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation for both devices, equivalent to the golden solution. The additional operating-region discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 979,
        "input_tokens": 980,
        "output_tokens": 9574,
        "total_tokens": 10554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 979,
        "input_tokens": 980,
        "output_tokens": 9574,
        "total_tokens": 10554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8599,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\n- \\(M_1\\) is an nMOS transistor with its source grounded, gate driven by \\(V_{in}\\), and drain connected to \\(V_{out}\\).\n- \\(M_2\\) is a pMOS transistor with its source connected to \\(V_{DD}\\).\n- The gate and drain of \\(M_2\\) are shorted together and connected to \\(V_{out}\\).\n\nThus, \\(M_2\\) is a **diode-connected pMOS load**, and \\(M_1\\) is a **common-source nMOS amplifier**. This is not a conventional CMOS inverter because the pMOS gate is not driven by \\(V_{in}\\).\n\n---\n\n## 2. DC operation\n\nLet\n\n\\[\n\\beta_n=k_n'(W/L)_1,\\qquad\n\\beta_p=k_p'(W/L)_2\n\\]\n\nand neglect channel-length modulation for the large-signal analysis.\n\n### \\(M_1\\) off\n\nIf \\(V_{in}<V_{TN1}\\), \\(M_1\\) is off. There is no dc current, so \\(M_2\\) also turns off and\n\n\\[\nV_{out}\\rightarrow V_{DD}.\n\\]\n\n### \\(M_1\\) saturated and \\(M_2\\) conducting\n\nFor a pMOS, the diode connection guarantees saturation whenever it conducts:\n\n\\[\nV_{SD2}=V_{SG2}.\n\\]\n\nThe drain currents are\n\n\\[\nI_{D1}=\\frac{1}{2}\\beta_n(V_{in}-V_{TN1})^2\n\\]\n\nand\n\n\\[\nI_{D2}=\\frac{1}{2}\\beta_p\n\\left(V_{DD}-V_{out}-|V_{TP2}|\\right)^2.\n\\]\n\nEquating the currents gives\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}-|V_{TP2}|\n-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\,\n(V_{in}-V_{TN1})\n}\n\\]\n\nprovided \\(M_1\\) remains in saturation. Therefore, the transfer characteristic is locally linear and **inverting** in this region.\n\nLet\n\n\\[\nr=\\sqrt{\\frac{\\beta_n}{\\beta_p}},\\qquad\nB=V_{DD}-|V_{TP2}|.\n\\]\n\nThe saturation condition for \\(M_1\\) is\n\n\\[\nV_{out}\\ge V_{in}-V_{TN1}.\n\\]\n\nUsing the expression above, this becomes\n\n\\[\n\\boxed{\nV_{in}\\le V_{TN1}+\\frac{B}{1+r}\n}\n\\]\n\nfor the saturated-\\(M_1\\) region.\n\n### \\(M_1\\) in the triode region\n\nFor larger \\(V_{in}\\), \\(M_1\\) enters the triode region. Its current is\n\n\\[\nI_{D1}\n=\n\\beta_n\\left[\n(V_{in}-V_{TN1})V_{out}\n-\\frac{V_{out}^2}{2}\n\\right].\n\\]\n\nThe output is then found from\n\n\\[\n\\boxed{\n\\beta_n\\left[\n(V_{in}-V_{TN1})V_{out}\n-\\frac{V_{out}^2}{2}\n\\right]\n=\n\\frac{\\beta_p}{2}\n(B-V_{out})^2\n}\n\\]\n\nusing the physically valid root.\n\nThus, increasing \\(V_{in}\\) pulls \\(V_{out}\\) downward. The output does not normally reach exactly \\(0\\ \\text{V}\\), because \\(M_2\\) continues to supply current toward the output.\n\n---\n\n## 3. Small-signal analysis\n\nAssume the bias point is in the region where \\(M_1\\) is saturated.\n\nWith an AC signal applied at \\(V_{in}\\), \\(V_{DD}\\) is AC ground. The diode-connected \\(M_2\\) appears at the output as a conductance\n\n\\[\ng_{m2}+g_{o2},\n\\]\n\nwhere \\(g_{o1}\\) and \\(g_{o2}\\) are the small-signal output conductances of \\(M_1\\) and \\(M_2\\).\n\nKCL at \\(V_{out}\\) gives\n\n\\[\ng_{m1}v_{in}+g_{o1}v_{out}\n=\n(g_{m2}+g_{o2})v_{out}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_{m1}}\n{g_{m2}+g_{o1}+g_{o2}}\n}\n\\]\n\nNeglecting output conductances,\n\n\\[\n\\boxed{A_v\\approx-\\frac{g_{m1}}{g_{m2}}}\n\\]\n\nand, in the saturated dc region,\n\n\\[\n\\boxed{\nA_v\\approx-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n}\n\\]\n\nThe output resistance is approximately\n\n\\[\n\\boxed{\nR_{out}\\approx\n\\frac{1}{g_{m2}+g_{o1}+g_{o2}}\n}\n\\]\n\nso the diode-connected load lowers the output resistance compared with an ideal current-source load.\n\nThe input resistance is very high because the signal is applied to the \\(M_1\\) gate; in practice, \\(C_{gs1}\\) and \\(C_{gb1}\\) determine the input impedance.\n\n---\n\n## 4. Overall behavior\n\n- Low \\(V_{in}\\): \\(M_1\\) is off and \\(V_{out}\\approx V_{DD}\\).\n- Increasing \\(V_{in}\\): \\(M_1\\) conducts more and \\(V_{out}\\) decreases.\n- The stage is an **inverting common-source amplifier** with a diode-connected pMOS load.\n- Its dc operating point is set directly by the dc component of \\(V_{in}\\); no separate bias network is shown.\n- It consumes static power while both transistors conduct:\n\n\\[\nP_{DC}\\approx V_{DD}I_D.\n\\]\n\nIn summary, the circuit provides negative voltage gain with moderate output resistance, but it is not a rail-to-rail CMOS inverter and its large-signal transfer characteristic is governed by the current balance between \\(M_1\\) and the diode-connected \\(M_2\\).",
        "format": "markdown",
        "sha256": "7c72854ab8982a3c235a14d198a087f597490001a1b5af01856f7d7e9a459949"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output conductances included, as well as the correct simplified gain. The KCL line has a minor sign inconsistency, but the stated gain is correct.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 979,
        "input_tokens": 980,
        "output_tokens": 14775,
        "total_tokens": 15755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13543,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 979,
        "input_tokens": 980,
        "output_tokens": 14775,
        "total_tokens": 15755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13543,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Device identification\n\nThe source arrows point **into** the channels, so the devices shown are **pMOS transistors**.\n\n| Device | Source | Gate | Drain |\n|---|---|---|---|\n| \\(M_2\\) | \\(V_{DD}\\) | \\(V_{in}\\) | \\(V_{out}\\) |\n| \\(M_1\\) | \\(V_{out}\\) | \\(0\\) | \\(0\\) |\n\nThus \\(M_1\\) has its gate and drain shorted to ground: it is a gate–drain-connected pMOS operating as a nonlinear pull-down load. Its source is the output node, so it is not simply an NMOS with \\(V_{GS}=0\\).\n\nThe circuit is therefore a pMOS common-source stage, with \\(M_2\\) pulling up and \\(M_1\\) pulling down.\n\n---\n\n## 2. DC analysis\n\nLet\n\n\\[\nT_1=|V_{TP1}|,\\qquad T_2=|V_{TP2}|,\n\\]\n\n\\[\n\\beta_i=\\mu_p C_{ox}(W/L)_i.\n\\]\n\nAssume the square-law model, initially neglecting channel-length modulation and body effect.\n\n### Current through \\(M_1\\)\n\nFor \\(M_1\\),\n\n\\[\nV_{SG1}=V_{out},\\qquad V_{SD1}=V_{out}.\n\\]\n\nWhenever \\(M_1\\) is on, it is in saturation because\n\n\\[\nV_{SD1}=V_{out}\\ge V_{out}-T_1=V_{SG1}-T_1.\n\\]\n\nTherefore,\n\n\\[\nI_{D1}=\n\\begin{cases}\n\\dfrac{\\beta_1}{2}(V_{out}-T_1)^2, & V_{out}>T_1,\\\\[6pt]\n0, & V_{out}\\le T_1.\n\\end{cases}\n\\]\n\nThus \\(M_1\\) increasingly pulls \\(V_{out}\\) toward ground as \\(V_{out}\\) rises, but its current becomes zero at approximately \\(V_{out}=T_1\\).\n\n### Current through \\(M_2\\)\n\nFor \\(M_2\\),\n\n\\[\nV_{SG2}=V_{DD}-V_{in},\\qquad\nV_{SD2}=V_{DD}-V_{out}.\n\\]\n\nIt is:\n\n- Off when \\(V_{in}\\ge V_{DD}-T_2\\).\n- In saturation when \\(V_{out}\\le V_{in}+T_2\\).\n- In the triode region when \\(V_{out}>V_{in}+T_2\\).\n\nIn saturation,\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}\n\\left(V_{DD}-V_{in}-T_2\\right)^2.\n\\]\n\nIn triode,\n\n\\[\nI_{D2}=\n\\beta_2\\left[\n(V_{DD}-V_{in}-T_2)(V_{DD}-V_{out})\n-\\frac{1}{2}(V_{DD}-V_{out})^2\n\\right].\n\\]\n\nThe output voltage is determined by the current balance\n\n\\[\n\\boxed{I_{D2}=I_{D1}}.\n\\]\n\n---\n\n## 3. DC transfer characteristic\n\nThe transfer characteristic is **inverting**:\n\n- Low \\(V_{in}\\) makes \\(M_2\\) strong, raising \\(V_{out}\\).\n- High \\(V_{in}\\) makes \\(M_2\\) weaker, so \\(M_1\\) discharges \\(V_{out}\\).\n\nIn the region where \\(M_2\\) is saturated,\n\n\\[\n\\frac{\\beta_2}{2}(V_{DD}-V_{in}-T_2)^2\n=\n\\frac{\\beta_1}{2}(V_{out}-T_1)^2,\n\\]\n\nso\n\n\\[\n\\boxed{\nV_{out}=T_1+\n\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n\\left(V_{DD}-V_{in}-T_2\\right)\n}.\n\\]\n\nFor identical devices with \\(T_1=T_2=T\\) and \\(\\lambda=0\\), define \\(B=V_{DD}-T\\). Then\n\n\\[\nV_{out}=\n\\begin{cases}\nV_{DD}-u(V_{in}), & 0\\le V_{in}\\le B/2,\\\\[4pt]\nV_{DD}-V_{in}, & B/2\\le V_{in}\\le B,\n\\end{cases}\n\\]\n\nwhere\n\n\\[\nu(V_{in})=\n\\frac{\n2B-V_{in}\n-\\sqrt{(2B-V_{in})^2-2B^2}\n}{2}.\n\\]\n\nWhen \\(V_{in}\\ge V_{DD}-T\\), \\(M_2\\) is off. An initially high output is then discharged by \\(M_1\\) only until approximately \\(V_{out}=T\\); without an additional load, the output is not uniquely established and can remain below that value.\n\n### Numerical illustration\n\nFor \\(V_{DD}=5\\text{ V}\\) and \\(|V_{TP}|=1\\text{ V}\\), with identical devices:\n\n- \\(V_{in}=0\\text{ V}\\): \\(V_{out}\\approx3.83\\text{ V}\\)\n- \\(V_{in}=2\\text{ V}\\): \\(V_{out}=3.00\\text{ V}\\)\n- \\(V_{in}=4\\text{ V}\\): \\(V_{out}\\approx1.00\\text{ V}\\)\n- \\(V_{in}=5\\text{ V}\\): \\(M_2\\) is off and the output is discharged only to about \\(1\\text{ V}\\)\n\n---\n\n## 4. Small-signal behavior\n\nDefine positive small-signal parameters\n\n\\[\ng_{m2}=\\frac{\\partial I_{D2}}{\\partial V_{SG2}},\\qquad\ng_{ds2}=\\frac{\\partial I_{D2}}{\\partial V_{SD2}},\n\\]\n\n\\[\ng_{m1}=\\frac{\\partial I_{D1}}{\\partial V_{SG1}},\\qquad\ng_{ds1}=\\frac{\\partial I_{D1}}{\\partial V_{SD1}}.\n\\]\n\nWhen both devices are on,\n\n\\[\n\\boxed{\n\\frac{dV_{out}}{dV_{in}}\n=\n-\\frac{g_{m2}}\n{g_{m1}+g_{ds1}+g_{ds2}}\n}.\n\\]\n\nThe negative sign confirms that the circuit is an **inverting amplifier**. For matched devices in the ideal saturation region,\n\n\\[\nA_v=-1.\n\\]\n\nWith the input at AC ground, the approximate output resistance is\n\n\\[\n\\boxed{\nR_{out}\\simeq\n\\frac{1}{g_{m1}+g_{ds1}+g_{ds2}}\n}.\n\\]\n\nThe MOS gates draw essentially no current, so the input resistance is very high.\n\n---\n\n## 5. Practical observations\n\n1. **It is inverter-like but not rail-to-rail.**\n   - Low input produces a relatively high output.\n   - High input produces a low output, but \\(M_1\\) stops conducting near \\(|V_{TP1}|\\), so the low level is generally not \\(0\\text{ V}\\).\n\n2. **Static current exists at low input.**  \n   For \\(V_{in}<V_{DD}-T_2\\), both transistors conduct, creating a path from \\(V_{DD}\\) to ground. This is ratioed logic and consumes DC power.\n\n3. **The output may float.**  \n   When \\(M_2\\) turns off, there is no active path to force the output to ground. An output load or an additional pull-down device would be needed for reliable low-level operation.\n\n4. **Body effects may be important.**  \n   The equations above assume the body is tied to the source or that body effects are neglected. A different body connection changes \\(T_1\\), and a ground-tied n-well may introduce body-diode behavior.\n\nIf the symbols were instead intended to be NMOS transistors, the circuit would not function as an inverter: \\(M_1\\) would have \\(V_{GS}=0\\), and \\(M_2\\) with its source at \\(V_{DD}\\) could not turn on for \\(0\\le V_{in}\\le V_{DD}\\).",
        "format": "markdown",
        "sha256": "fc6f8a3ce37130e4452836d6251a94f6c1888c045b7383e3635745be2f92a532"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a gate/drain-grounded diode-connected PMOS load. The current-balance and small-signal analysis gives the expected inverting gm/gm behavior; the additional pull-down and output-level discussion is compatible with the golden solution.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2036,
        "output_tokens": 23350,
        "total_tokens": 25386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2036,
        "output_tokens": 23350,
        "total_tokens": 25386,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nThe circuit is a **CMOS inverter**:\n\n- \\(M_2\\): PMOS pull-up transistor, source at \\(V_{DD}\\), drain at \\(V_{out}\\)\n- \\(M_1\\): NMOS pull-down transistor, drain at \\(V_{out}\\), source at ground\n- The gates receive complementary logic levels: \\(M_2\\)'s gate is \\(V_{in}\\), while \\(M_1\\)'s gate is tied to ground.\n\nThus, ideally,\n\n\\[\nV_{out}=\\overline{V_{in}}\n\\]\n\n## 2. DC operation\n\n| \\(V_{in}\\) | \\(M_1\\) (NMOS) | \\(M_2\\) (PMOS) | \\(V_{out}\\) |\n|---|---|---|---|\n| \\(0\\) | OFF | ON | \\(V_{DD}\\) |\n| \\(V_{DD}\\) | ON | OFF | \\(0\\) |\n\n- **Low input:**  \n  \\(V_{GS1}=0\\), so \\(M_1\\) is off.  \n  \\(V_{SG2}=V_{DD}\\), so \\(M_2\\) is on and charges the output to \\(V_{DD}\\).\n\n- **High input:**  \n  \\(V_{GS1}=V_{DD}\\), so \\(M_1\\) is on and discharges the output to ground.  \n  \\(V_{SG2}=0\\), so \\(M_2\\) is off.\n\nDuring the input transition, both transistors may conduct temporarily, giving a direct path from \\(V_{DD}\\) to ground.\n\n## 3. Switching threshold\n\nLet\n\n\\[\n\\beta_n=\\mu_n C_{ox}(W/L)_n,\\qquad\n\\beta_p=\\mu_p C_{ox}(W/L)_p\n\\]\n\nand let \\(V_{tn}\\) and \\(|V_{tp}|\\) be the threshold-voltage magnitudes. In saturation, the switching threshold \\(V_M\\) is found by equating the pull-up and pull-down currents:\n\n\\[\n\\beta_n(V_M-V_{tn})^2\n=\n\\beta_p(V_{DD}-V_M-|V_{tp}|)^2\n\\]\n\nwhich gives\n\n\\[\nV_M=\n\\frac{\\sqrt{\\beta_n}V_{tn}\n+\\sqrt{\\beta_p}(V_{DD}-|V_{tp}|)}\n{\\sqrt{\\beta_n}+\\sqrt{\\beta_p}}\n\\]\n\nFor matched transistors with\n\n\\[\n\\beta_n=\\beta_p,\\qquad V_{tn}=|V_{tp}|,\n\\]\n\nthe result is\n\n\\[\n\\boxed{V_M=\\frac{V_{DD}}{2}}\n\\]\n\nNear the switching threshold, the small-signal voltage gain is approximately\n\n\\[\nA_v=\\frac{dV_{out}}{dV_{in}}\n\\approx-\\frac{g_{mn}}{g_{mp}},\n\\]\n\nwhich is close to \\(-1\\) for symmetric devices.\n\n## 4. Power and practical behavior\n\n- In either stable logic state, there is ideally **no DC path from \\(V_{DD}\\) to ground**, so static CMOS power consumption is nearly zero, apart from leakage.\n- During transitions, both devices conduct, producing **short-circuit current**.\n- Charging a load capacitance \\(C_L\\) at frequency \\(f\\) requires approximately\n\n\\[\nP_{\\text{dynamic}}\\approx \\alpha C_L V_{DD}^{2}f\n\\]\n\nwhere \\(\\alpha\\) is the switching activity.\n\nThe transistor sizes determine the pull-up/pull-up strength, output rise and fall times, noise margins, and switching threshold. No numerical values can be determined without the device parameters and load.",
        "format": "markdown",
        "sha256": "70a8b3076c3003542cd8c2f04ee204f60c95c7d041dd0028c410b8e790d881aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies both the lower device and the circuit topology: both transistors are PMOS, and the lower one is a diode-connected PMOS load, not an NMOS pull-down. It therefore misses the gm/gm amplifier and gives an inapplicable inverter analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2035,
        "input_tokens": 2036,
        "output_tokens": 3764,
        "total_tokens": 5800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3043,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2035,
        "input_tokens": 2036,
        "output_tokens": 3764,
        "total_tokens": 5800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3043,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nThe circuit consists of two transistors connected in series between \\(V_{DD}\\) and ground, with their drains connected to \\(V_{\\text{out}}\\):\n\n- \\(M_2\\): upper pull-up device, source at \\(V_{DD}\\), gate driven by \\(V_{\\text{in}}\\).\n- \\(M_1\\): lower pull-down device, source at ground, **gate hard-wired to ground**.\n\nAssuming ordinary enhancement-mode MOSFETs, with \\(M_2\\) a PMOS and \\(M_1\\) an NMOS, the important point is that this is **not a conventional CMOS inverter**, because both transistor gates are not driven by \\(V_{\\text{in}}\\).\n\n## 2. DC operation\n\n| Input | \\(M_2\\) | \\(M_1\\) | Output |\n|---|---|---|---|\n| \\(V_{\\text{in}}\\approx 0\\) | On | Off | Charges toward \\(V_{DD}\\) |\n| \\(V_{\\text{in}}\\approx V_{DD}\\) | Off | Off | Floating; retains its previous voltage |\n| \\(V_{\\text{in}}\\) near the PMOS threshold | Weakly on/off | Off | Indeterminate |\n\nFor \\(M_1\\),\n\n\\[\nV_{GS1}=V_G-V_S=0,\n\\]\n\nso an enhancement NMOS is nominally cut off:\n\n\\[\nI_{D1}\\approx 0.\n\\]\n\nFor \\(M_2\\), the PMOS is on when\n\n\\[\nV_{SG2}=V_{DD}-V_{\\text{in}}>|V_{TP}|.\n\\]\n\nWhen it is on, \\(V_{\\text{out}}\\) is charged through \\(M_2\\). Initially \\(M_2\\) is generally in saturation:\n\n\\[\nI_{D2}\\approx\n\\frac{1}{2}\\mu_p C_{\\text{ox}}\n\\left(\\frac WL\\right)_2\n\\left(V_{DD}-V_{\\text{in}}-|V_{TP}|\\right)^2.\n\\]\n\nAs \\(V_{\\text{out}}\\) approaches \\(V_{DD}\\), \\(M_2\\) enters the triode region:\n\n\\[\nI_{D2}\\approx\n\\mu_p C_{\\text{ox}}\\left(\\frac WL\\right)_2\n\\left[\n(V_{DD}-V_{\\text{out}})\n\\left(V_{DD}-V_{\\text{in}}-|V_{TP}|\\right)\n-\\frac{(V_{DD}-V_{\\text{out}})^2}{2}\n\\right].\n\\]\n\nWith no significant load, the final value is approximately\n\n\\[\nV_{\\text{out}}\\rightarrow V_{DD}.\n\\]\n\n## 3. Behavior when \\(V_{\\text{in}}\\) is high\n\nWhen \\(V_{\\text{in}}\\) is high:\n\n- \\(M_2\\) turns off.\n- \\(M_1\\) is still off because its gate is at ground.\n- Thus neither transistor provides a controlled path for discharging \\(V_{\\text{out}}\\).\n\nFor an output capacitance \\(C_L\\),\n\n\\[\nC_L\\frac{dV_{\\text{out}}}{dt}\n\\approx I_{M2}-I_{M1}-I_{\\text{leak}}-I_{\\text{load}}.\n\\]\n\nWhen both transistors are off,\n\n\\[\nC_L\\frac{dV_{\\text{out}}}{dt}\n\\approx-I_{\\text{leak}}-I_{\\text{load}}.\n\\]\n\nTherefore:\n\n- If \\(V_{\\text{out}}\\) was previously high, it remains high except for leakage or load-induced droop.\n- If it was previously low, it remains low.\n- If there is a resistive load to ground, it discharges slowly with an approximately \\(R_L C_L\\) time constant.\n- With no load, the output is a charge-storage node and its voltage is not guaranteed.\n\nA simplified transfer behavior is therefore\n\n\\[\nV_{\\text{out}}=\n\\begin{cases}\nV_{DD}, & V_{\\text{in}}\\text{ low},\\\\\nX\\;(\\text{floating/retained}), & V_{\\text{in}}\\text{ high}.\n\\end{cases}\n\\]\n\nThus the circuit does not provide normal logic inversion or a guaranteed logic-low output.\n\n## 4. Consequences\n\n- No controlled falling edge.\n- High output impedance and possible output droop when the input is high.\n- Poor or undefined noise margins.\n- Susceptibility to leakage, charge injection, and capacitive coupling.\n- Ideally, no static path from \\(V_{DD}\\) to ground, so static power is low, but at the cost of a nonfunctional output state.\n\n## 5. Possible intended circuits\n\n### If a normal CMOS inverter was intended\n\nThe gate of \\(M_1\\) should be connected to \\(V_{\\text{in}}\\), giving\n\n\\[\n\\begin{cases}\nV_{\\text{in}}=0:& M_2\\text{ on},\\ M_1\\text{ off},\\quad V_{\\text{out}}=V_{DD},\\\\\nV_{\\text{in}}=V_{DD}:& M_2\\text{ off},\\ M_1\\text{ on},\\quad V_{\\text{out}}=0.\n\\end{cases}\n\\]\n\n### If \\(M_1\\) is intentionally a depletion-mode NMOS\n\nA depletion NMOS remains conducting at \\(V_{GS}=0\\). In that case the circuit becomes a **ratioed inverter**:\n\n- High \\(V_{\\text{in}}\\): \\(M_2\\) is off and \\(M_1\\) pulls the output low.\n- Low \\(V_{\\text{in}}\\): both devices conduct, so the output depends on their current-strength ratio.\n\nTo obtain a valid high level, \\(M_2\\) must be stronger than \\(M_1\\). This topology normally has \\(V_{OH}<V_{DD}\\) and draws static current when both devices are on. The device type must therefore be specified to distinguish this case from the enhancement-MOS behavior above.",
        "format": "markdown",
        "sha256": "05f10891aa25a9bd50ab959d1b49529cd3c13a43f5a33dba654e773961e3a104"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an enhancement NMOS that is off, so it concludes the output floats. In the figure both devices are PMOS; M1 is a diode-connected PMOS load, giving a gm/gm amplifier with gain approximately −gm2/gm1.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2035,
        "input_tokens": 2036,
        "output_tokens": 18781,
        "total_tokens": 20817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17601,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2035,
        "input_tokens": 2036,
        "output_tokens": 18781,
        "total_tokens": 20817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17601,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are ideal AC grounds and the MOS source/body junctions are shorted, let\n\n\\[\nr_{oi}=\\frac{1}{g_{oi}}.\n\\]\n\nApply a test voltage \\(v_o\\) at \\(R_{\\text{out}}\\), and let \\(v_x\\) be the voltage at node \\(X\\). Since the source and gate of \\(M_2\\) are both AC-grounded, \\(M_2\\) contributes only \\(r_{o2}\\) from \\(X\\) to ground. For \\(M_1\\),\n\n\\[\ni_{d1}=g_{m1}(0-v_x)+g_{o1}(v_o-v_x),\n\\]\n\nwhile\n\n\\[\ni_{d2}=g_{o2}v_x.\n\\]\n\nKCL at \\(X\\) gives \\(i_{d1}=i_{d2}\\), so\n\n\\[\nv_x=\\frac{g_{o1}}{g_{o1}+g_{m1}+g_{o2}}v_o.\n\\]\n\nTherefore,\n\n\\[\nR_{\\text{out}}\n=\\frac{v_o}{i_t}\n=\\frac{g_{o1}+g_{m1}+g_{o2}}{g_{o1}g_{o2}}.\n\\]\n\nThus,\n\n\\[\n\\boxed{\nR_{\\text{out}}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n=r_{o1}+r_{o2}\\left(1+g_{m1}r_{o1}\\right)\n}\n\\]\n\nThe \\(g_{m2}\\) term does not appear because both the gate and source of \\(M_2\\) are at AC ground. If channel-length modulation is neglected (\\(r_o\\to\\infty\\)), the ideal output resistance is infinite.",
        "format": "markdown",
        "sha256": "6e821d1fda409e429c8dfee3758e38f7bc8f949d72ee61f7dee6507529fa3533"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The derivation gives the correct output resistance, including the cascode factor gm1; omitting body effect is explicitly acceptable. Its small-signal setup correctly assigns the cascode action to M1.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 3016,
        "output_tokens": 24861,
        "total_tokens": 27877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 3016,
        "output_tokens": 24861,
        "total_tokens": 27877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assume \\(V_{b1},V_{b2}\\), and \\(V_{DD}\\) are ideal bias sources, so they are ac ground, and both PMOS devices operate in saturation with channel-length modulation included.\n\nLet\n\n\\[\nr_{o1}=\\frac{1}{g_{o1}},\\qquad r_{o2}=\\frac{1}{g_{o2}},\n\\]\n\nwhere \\(r_{o1}\\) and \\(r_{o2}\\) are the output resistances of \\(M_1\\) and \\(M_2\\), respectively.\n\nApplying a test voltage at the output gives\n\n\\[\n\\boxed{R_{\\text{out}}\n=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{R_{\\text{out}}\n=r_{o1}+r_{o2}\\left(1+g_{m1}r_{o1}\\right)}.\n\\]\n\nThus the PMOS cascode greatly increases the output resistance. If channel-length modulation is neglected, \\(r_{o1},r_{o2}\\to\\infty\\), so \\(R_{\\text{out}}\\to\\infty\\).\n\nIf body effect for \\(M_1\\) is included, replace \\(g_{m1}\\) by \\(g_{m1}+g_{mb1}\\).",
        "format": "markdown",
        "sha256": "19b0738cee94495048c790752357a50d3901433d92a7bb88131759ed81fe0ae4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct PMOS cascode output-resistance expression with M1’s transconductance; the optional body-effect correction is also correct.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3015,
        "input_tokens": 3016,
        "output_tokens": 17268,
        "total_tokens": 20284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3015,
        "input_tokens": 3016,
        "output_tokens": 17268,
        "total_tokens": 20284,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assume both PMOS transistors operate in saturation, the bias voltages and \\(V_{DD}\\) are AC ground, and body effect is neglected.\n\nLet \\(i_t\\) be a small-signal test current injected into the output in the direction shown, and let \\(v_x\\) be the small-signal voltage at \\(X\\).\n\nSince the gate and source of \\(M_2\\) are at AC ground, \\(M_2\\) appears at \\(X\\) as \\(r_{o2}\\). Hence\n\n\\[\nv_x=i_t r_{o2}.\n\\]\n\nFor \\(M_1\\), \\(v_{sg1}=-v_x\\), so its small-signal output current is\n\n\\[\ni_t=\\frac{v_o-v_x}{r_{o1}}+g_{m1}v_x.\n\\]\n\nSubstituting \\(v_x=i_t r_{o2}\\) gives\n\n\\[\nv_o=i_t\\left(r_{o1}+r_{o2}-g_{m1}r_{o1}r_{o2}\\right).\n\\]\n\nTherefore,\n\n\\[\n\\boxed{R_{\\text{out}}\n=r_{o1}+r_{o2}-g_{m1}r_{o1}r_{o2}}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{R_{\\text{out}}\n=\\frac{g_{o1}+g_{o2}-g_{m1}}{g_{o1}g_{o2}}}.\n\\]\n\nThe minus sign results from the PMOS source-degenerated connection shown. If a signed \\(g_m\\) is used (\\(g_m<0\\) for PMOS), the result is written \\(R_{\\text{out}}=r_{o1}+r_{o2}+g_mr_{o1}r_{o2}\\).",
        "format": "markdown",
        "sha256": "cc93e9835d9bda04b5fa9459a9812f9ae58d0900d0d4734864e66b7dee06be93"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the PMOS stack and the relevant M1, ro1, and ro2 terms, but reverses the transconductance feedback sign. The result should contain +gm1 ro1 ro2, so the central answer is wrong.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3015,
        "input_tokens": 3016,
        "output_tokens": 37665,
        "total_tokens": 40681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3015,
        "input_tokens": 3016,
        "output_tokens": 37665,
        "total_tokens": 40681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 37314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The schematic alone does not guarantee saturation; it must be enforced from the bias voltages and the actual voltage at node \\(X\\).\n\nFor the upper PMOS \\(M_2\\),\n\n\\[\nV_{S2}=V_{DD},\\qquad V_{D2}=V_X,\\qquad V_{G2}=V_{b2}.\n\\]\n\n### Conditions for \\(M_2\\) to be ON and saturated\n\nON condition:\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}>|V_{TP2}|.\n\\]\n\nSaturation condition:\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nTherefore,\n\n\\[\nV_{DD}-V_X\\ge (V_{DD}-V_{b2})-|V_{TP2}|,\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nThus, \\(V_{b2}\\) must be chosen so that the voltage at \\(X\\) remains below this limit over the required output range, supply range, process corners, and temperature range. It is also necessary to ensure\n\n\\[\nV_{b2}<V_{DD}-|V_{TP2}|\n\\]\n\nso that \\(M_2\\) is not turned off.\n\nIf \\(M_1\\) is also saturated and\n\n\\[\nK_1=\\frac{1}{2}\\mu_p C_{\\mathrm{ox}}\\left(\\frac WL\\right)_1,\n\\]\n\nthen\n\n\\[\nV_X=V_{b1}+|V_{TP1}|+\\sqrt{\\frac{I}{K_1}},\n\\]\n\nand the \\(M_2\\) saturation requirement becomes\n\n\\[\n\\boxed{\nV_{b1}+|V_{TP1}|+\\sqrt{\\frac{I}{K_1}}\n\\le V_{b2}+|V_{TP2}|\n}.\n\\]\n\nIn practice, verify the condition in simulation using the actual device threshold, including body effect, and include a margin such as\n\n\\[\nV_X\\le V_{b2}+|V_{TP2}|-\\Delta V.\n\\]",
        "format": "markdown",
        "sha256": "a908bafa3a6fd23f2da53237553bf4502d813bcecc13ca7ff03b982455c5fd34"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS saturation condition and relates VX to Vb1, yielding an equivalent Vb1 condition. The square-law expression is appropriately conditional on M1 being saturated.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2978,
        "output_tokens": 5516,
        "total_tokens": 8494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2978,
        "output_tokens": 5516,
        "total_tokens": 8494,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The arrow symbols indicate that \\(M_2\\) is a pMOS. Its terminals are\n\n\\[\nV_{S2}=V_{DD},\\qquad V_{D2}=V_X,\\qquad V_{G2}=V_{b2}.\n\\]\n\nFor \\(M_2\\) to be ON and saturated:\n\n\\[\nV_{SG2}=V_{DD}-V_{b2}>|V_{TP2}|\n\\]\n\nand\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nSubstituting the node voltages,\n\n\\[\nV_{DD}-V_X\\ge (V_{DD}-V_{b2})-|V_{TP2}|,\n\\]\n\nwhich gives the saturation condition\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nThus, in practice, determine the worst-case value of \\(V_X\\) and choose the bias so that\n\n\\[\n\\boxed{V_{b2}\\ge V_{X,\\max}-|V_{TP2}|}\n\\]\n\nwith some margin for threshold variation, while also ensuring\n\n\\[\nV_{DD}-V_{b2}>|V_{TP2}|\n\\]\n\nso that \\(M_2\\) remains on. If \\(V_X\\) rises above \\(V_{b2}+|V_{TP2}|\\), \\(M_2\\) enters the triode region.",
        "format": "markdown",
        "sha256": "1378c444239d9dba57d980f7279f91bab2ac8e099476289fcc7e562cb79e5c42"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The PMOS saturation condition is correct, but the answer treats Vb2 as the control and misses that VX is set by Vb1, which is the key design condition.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2978,
        "output_tokens": 4719,
        "total_tokens": 7697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4437,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2978,
        "output_tokens": 4719,
        "total_tokens": 7697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4437,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "As drawn, \\(M_2\\) is a pMOS with\n\n\\[\nV_{S2}=V_{DD},\\qquad V_{D2}=V_X,\\qquad V_{G2}=V_{b2}.\n\\]\n\nFor a pMOS, saturation requires\n\n\\[\nV_{SD2}\\ge V_{SG2}-|V_{TP2}|.\n\\]\n\nHere,\n\n\\[\nV_{SD2}=V_{DD}-V_X,\\qquad\nV_{SG2}=V_{DD}-V_{b2}.\n\\]\n\nTherefore,\n\n\\[\nV_{DD}-V_X\\ge V_{DD}-V_{b2}-|V_{TP2}|\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{V_X\\le V_{b2}+|V_{TP2}|}.\n\\]\n\nThus, choose the bias so that\n\n\\[\n\\boxed{V_{b2}\\ge V_{X,\\max}-|V_{TP2}|}\n\\]\n\nover the complete operating range, with some margin since equality is the saturation boundary. Also ensure that \\(M_2\\) is on:\n\n\\[\nV_{b2}<V_{DD}-|V_{TP2}|.\n\\]\n\nIf body effect is significant, use the worst-case effective threshold in these inequalities.",
        "format": "markdown",
        "sha256": "c8e1b2c0de56bfa1dc2a0c42c61314f5b4d1abc063bbff630bfc341c428f422a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The pMOS saturation inequality for M2 is correct, but the answer treats Vb2 as the control and does not relate VX to Vb1, which sets VX in this circuit.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2978,
        "output_tokens": 15779,
        "total_tokens": 18757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2816,
        "input_tokens": 2978,
        "output_tokens": 15779,
        "total_tokens": 18757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nThis is an **NMOS cascode amplifier**:\n\n- \\(M_1\\): common-source transistor; its source is grounded and its drain is node \\(X\\).\n- \\(M_2\\): common-gate cascode transistor; its gate is held at \\(V_{b1}\\), its source is \\(X\\), and its drain is the output.\n- \\(I_1\\): ideal current-source load connected to \\(V_{DD}\\).\n\nSince \\(M_1\\) and \\(M_2\\) are in series,\n\n\\[\nI_{D1}=I_{D2}=I_1 .\n\\]\n\nFor small signals in the normal region, an increase in \\(V_{in}\\) produces a decrease in \\(V_{out}\\); hence the stage is inverting.\n\n---\n\n## 2. DC bias\n\nAssuming long-channel square-law operation and both transistors saturated,\n\n\\[\nI_1=\\frac{1}{2}\\beta_1(V_{in}-V_{T1})^2,\n\\qquad\nI_1=\\frac{1}{2}\\beta_2(V_{b1}-V_X-V_{T2})^2,\n\\]\n\nwhere\n\n\\[\n\\beta_i=\\mu_n C_{ox}(W/L)_i.\n\\]\n\nThus the nominal overdrives are\n\n\\[\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}},\n\\qquad\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}},\n\\]\n\nand the bias values are approximately\n\n\\[\nV_{in,Q}=V_{T1}+V_{OV1},\n\\]\n\n\\[\nV_X=V_{b1}-V_{T2}-V_{OV2}.\n\\]\n\nEquivalently, given a desired \\(V_X\\),\n\n\\[\nV_{b1}=V_X+V_{T2}+V_{OV2}.\n\\]\n\n### Region-of-operation conditions\n\nFor \\(M_1\\) to remain saturated,\n\n\\[\nV_X\\geq V_{in}-V_{T1}.\n\\]\n\nFor \\(M_2\\) to remain on and saturated,\n\n\\[\nV_X<V_{b1}-V_{T2},\n\\]\n\n\\[\nV_{out}\\geq V_{b1}-V_{T2}.\n\\]\n\nThe last condition follows from\n\n\\[\nV_{DS2}\\geq V_{GS2}-V_{T2}.\n\\]\n\nIf the substrate of \\(M_2\\) is grounded, body effect makes its threshold voltage depend on \\(V_X\\):\n\n\\[\nV_{TN2}=V_{T0}+\\gamma_2\n\\left(\\sqrt{\\phi+V_X}-\\sqrt{\\phi}\\right).\n\\]\n\n### Important DC observation\n\nWith an ideal current source and neglecting channel-length modulation, \\(V_{out}\\) is **not uniquely determined**. The current source fixes only the branch current; \\(V_{out}\\) can take any value for which \\(M_2\\) remains saturated. In a real circuit, channel-length modulation, the finite output resistance of the current source, or an external load establishes the output DC level.\n\n---\n\n## 3. Small-signal voltage gain\n\nAssume \\(V_{b1}\\) is an ideal bias voltage, so it is an AC ground. Let\n\n- \\(g_{m1},g_{m2}\\): transconductances,\n- \\(g_{o1},g_{o2}\\): output conductances,\n- \\(g_{mb2}\\): body-effect transconductance of \\(M_2\\), omitted if its body is tied to its source,\n- \\(G_L\\): total small-signal conductance at \\(V_{out}\\), including the current-source output resistance and any external load.\n\nDefine\n\n\\[\nA=g_{m2}+g_{mb2}.\n\\]\n\nThe transistor currents are\n\n\\[\ni_1=g_{m1}v_{in}+g_{o1}v_x,\n\\]\n\n\\[\ni_2=g_{o2}v_{out}-(A+g_{o2})v_x.\n\\]\n\nApplying KCL at \\(X\\) and at the output gives\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n=\n-\\frac{g_{m1}(A+g_{o2})}\n{g_{o1}g_{o2}+G_L(A+g_{o2}+g_{o1})}\n}\n\\]\n\nfor both devices operating in saturation.\n\n### Ideal current source, \\(G_L=0\\)\n\n\\[\n\\boxed{\nA_v=\n-\\frac{g_{m1}}{g_{o1}}\n\\left(1+\\frac{g_{m2}+g_{mb2}}{g_{o2}}\\right)\n}\n\\]\n\nIgnoring body effect and assuming \\(g_m\\gg g_o\\),\n\n\\[\nA_v\\approx\n-g_{m1}g_{m2}r_{o1}r_{o2}.\n\\]\n\nThus an ideal current-source load produces a very high gain.\n\n### Practical finite load\n\nThe resistance looking into the drain of the cascode stack, with \\(V_{in}\\) grounded, is\n\n\\[\nR_C=\n\\frac{g_{m2}+g_{mb2}+g_{o2}+g_{o1}}\n{g_{o1}g_{o2}}\n\\approx\n(g_{m2}+g_{mb2})r_{o1}r_{o2}.\n\\]\n\nTherefore a useful approximation is\n\n\\[\n\\boxed{\nA_v\\approx\n-g_{m1}\\left(R_C\\parallel R_I\\parallel R_{\\text{load}}\\right)\n}\n\\]\n\nwhere \\(R_I\\) is the output resistance of the bias current source.\n\n---\n\n## 4. Output range and limitations\n\nThe useful output range is approximately bounded by\n\n\\[\nV_{out,\\min}\\approx V_{b1}-V_{TN2},\n\\]\n\nbecause below this value \\(M_2\\) enters the triode region and the gain compresses. The upper limit is set by the current-source compliance:\n\n\\[\nV_{out,\\max}\\approx V_{DD}-V_{OV,I1}.\n\\]\n\nThe input must also keep \\(M_1\\) active:\n\n\\[\nV_{T1}<V_{in}\\lesssim V_X+V_{T1}.\n\\]\n\nOutside these limits:\n\n- low \\(V_{in}\\) turns \\(M_1\\) off and drives the output toward the supply in a practical implementation;\n- excessive \\(V_{in}\\) makes \\(M_1\\) enter the triode region;\n- low \\(V_{out}\\) makes \\(M_2\\) enter the triode region.\n\n---\n\n## 5. Overall assessment\n\nThe circuit provides:\n\n- high voltage gain,\n- much higher output resistance than a simple common-source stage,\n- reduced Miller multiplication of \\(M_1\\)'s drain capacitance and usually improved bandwidth,\n- high input impedance because the signal is applied to a gate.\n\nIts disadvantages are the extra \\(V_{b1}\\) bias, reduced input and output range, body-effect effects in \\(M_2\\), and additional noise from the cascode transistor and current-source load.",
        "format": "markdown",
        "sha256": "5a955f856ce297bf1d5cc9d7c36730e393f153d79d368dc7fb1abbee13e634a2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the ideal-load gain equivalent to the golden expression. The additional analysis is consistent with the stated assumptions.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 30232,
        "total_tokens": 31873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 30232,
        "total_tokens": 31873,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nAssuming \\(M_1\\) and \\(M_2\\) are n-channel MOSFETs:\n\n- \\(M_1\\) is a common-source input transistor.\n- \\(M_2\\) has its gate at the fixed bias voltage \\(V_{b1}\\), so in small signal it is a common-gate transistor.\n- Together they form an **NMOS cascode amplifier**.\n- \\(I_1\\) is the high-impedance current-source load at the output.\n\nThe output is inverted: an increase in \\(V_{\\text{in}}\\) generally produces a decrease in \\(V_{\\text{out}}\\).\n\n---\n\n## 2. DC bias\n\nAssuming long-channel square-law operation and neglecting channel-length modulation, define\n\n\\[\n\\beta_i=\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_i .\n\\]\n\nWith no separate dc load, the current-source load forces\n\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_{\\text{in}}-V_{TH1})^2,\n\\]\n\nso its quiescent gate voltage is\n\n\\[\nV_{\\text{in},Q}=V_{TH1}+V_{OV1},\n\\qquad\nV_{OV1}=\\sqrt{\\frac{2I_1}{\\beta_1}}.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nI_1=\\frac{\\beta_2}{2}\n\\left(V_{b1}-V_X-V_{TH2}\\right)^2,\n\\]\n\nhence\n\n\\[\nV_X=V_{b1}-V_{TH2}-V_{OV2},\n\\qquad\nV_{OV2}=\\sqrt{\\frac{2I_1}{\\beta_2}}.\n\\]\n\n### Saturation requirements\n\nFor \\(M_1\\) to remain saturated,\n\n\\[\nV_X=V_{DS1}\\ge V_{OV1},\n\\]\n\nor\n\n\\[\nV_{b1}-V_{TH2}-V_{OV2}\\ge V_{OV1}.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}=V_{\\text{out}}-V_X\\ge V_{OV2},\n\\]\n\nwhich, using the bias relation, gives approximately\n\n\\[\nV_{\\text{out}}\\ge V_{b1}-V_{TH2}.\n\\]\n\nThe current source also needs sufficient compliance:\n\n\\[\nV_{DD}-V_{\\text{out}}\\ge V_{\\text{headroom}}.\n\\]\n\nIf \\(M_2\\) leaves saturation, the cascode action, output resistance, and gain degrade significantly.\n\n### Important dc caveat\n\nWith an ideal current source, ideal MOSFET square-law models, and no dc load, \\(V_{\\text{out}}\\) is not uniquely determined: \\(M_2\\)'s saturation current is independent of \\(V_{\\text{out}}\\). A load, the finite output resistance of the current source, channel-length modulation, or circuit parasitics determines the actual dc value.\n\n---\n\n## 3. Small-signal gain\n\nAt ac, \\(V_{DD}\\) and \\(V_{b1}\\) are grounds. An ideal current source is an open circuit. Let\n\n- \\(g_{m1},g_{m2}\\): transconductances,\n- \\(g_{o1}=1/r_{o1}\\), \\(g_{o2}=1/r_{o2}\\): output conductances,\n- \\(G\\): total output conductance to ac ground, including a load and the finite output resistance of \\(I_1\\):\n\n\\[\nG=\\frac1{R_L}+\\frac1{r_I}.\n\\]\n\nFor the literal circuit, with an ideal current source and no load, \\(G=0\\).\n\nNeglecting body effect, the nodal equations are\n\n\\[\ng_{m1}v_{\\text{in}}+g_{o1}v_x\n=\n-g_{m2}v_x+g_{o2}(v_{\\text{out}}-v_x),\n\\]\n\nand\n\n\\[\nGv_{\\text{out}}\n-g_{m2}v_x+g_{o2}(v_{\\text{out}}-v_x)=0.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-\\frac{g_{m1}(g_{m2}+g_{o2})}\n{g_{o1}(G+g_{o2})+G(g_{m2}+g_{o2})}\n}\n\\]\n\nThe negative sign indicates a \\(180^\\circ\\) phase inversion.\n\n### Ideal current source and no external load\n\nFor \\(G=0\\),\n\n\\[\n\\boxed{\nA_v=-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n}\n\\]\n\nwhich can be very large. If both \\(r_{o1}\\) and \\(r_{o2}\\) are taken as infinite, the output node is floating and no finite small-signal voltage gain is defined; a load or finite output resistance is then required.\n\n### Practical loaded case\n\nThe intrinsic output resistance of the cascode is approximately\n\n\\[\n\\boxed{\nR_{\\text{out,int}}\n\\simeq g_{m2}r_{o1}r_{o2}\n}\n\\]\n\nwith the more exact result, neglecting body effect,\n\n\\[\nR_{\\text{out,int}}\n=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.\n\\]\n\nThus,\n\n\\[\nR_{\\text{out,total}}\n=R_{\\text{out,int}}\\parallel r_I\\parallel R_L,\n\\]\n\nand, to the usual first-order accuracy,\n\n\\[\n\\boxed{\nA_v\\simeq-g_{m1}R_{\\text{out,total}}\n}\n\\]\n\nFor example, if \\(R_L\\) dominates and transistor output resistances are neglected,\n\n\\[\nA_v\\simeq-g_{m1}R_L.\n\\]\n\n---\n\n## 4. Overall behavior\n\n- **High output resistance:** \\(M_2\\) raises the output resistance by approximately \\(g_{m2}r_{o2}\\).\n- **Good input-output isolation:** \\(M_2\\) reduces the Miller effect seen by \\(M_1\\).\n- **Inverting voltage gain:** positive \\(V_{\\text{in}}\\) causes \\(V_{\\text{out}}\\) to move negative.\n- **Very high input resistance:** MOS gates draw essentially no signal current.\n- **Headroom penalty:** both \\(M_2\\) and the current source must remain saturated.\n- **Body effect:** if \\(M_2\\)'s bulk is grounded, its threshold rises because its source is at \\(V_X>0\\). This changes the required \\(V_{b1}\\) and slightly reduces the gain.\n\nIn summary, the circuit is a current-source-loaded NMOS cascode amplifier. Its practical gain is set by the cascode's boosted output resistance in parallel with the current-source output resistance and any external load.",
        "format": "markdown",
        "sha256": "16fcc3c732ffdb66135e9a3b7d92073d1ca852e426363dcbb5b6a69e4f20cc8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. Omitting body effect is allowed by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1641,
        "output_tokens": 31590,
        "total_tokens": 33231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1641,
        "output_tokens": 31590,
        "total_tokens": 33231,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nAssuming both transistors are NMOS devices, this is a **current-source-loaded cascode amplifier**:\n\n- \\(M_1\\): common-source input transistor; \\(V_{\\text{in}}\\) controls its drain current.\n- \\(M_2\\): common-gate cascode transistor; its gate is biased by \\(V_{b1}\\).\n- \\(I_1\\): active current-source load connected to \\(V_{DD}\\).\n- \\(X\\): source node of \\(M_2\\) and drain node of \\(M_1\\).\n\nThe cascode \\(M_2\\) substantially increases the output resistance and hence the voltage gain.\n\n---\n\n## 2. DC operating point\n\nSince \\(M_1\\), \\(M_2\\), and \\(I_1\\) are in series,\n\n\\[\nI_{D1}=I_{D2}=I_1.\n\\]\n\nLet\n\n\\[\nk_i=\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_i.\n\\]\n\nNeglecting body effect and channel-length modulation, the saturated-region currents are\n\n\\[\nI_1=\\frac{1}{2}k_1(V_{\\text{in}}-V_{T1})^2\n\\]\n\nand\n\n\\[\nI_1=\\frac{1}{2}k_2(V_{b1}-V_X-V_{T2})^2.\n\\]\n\nThus, for a specified \\(I_1\\),\n\n\\[\nV_{\\text{in}}=V_{T1}+\\sqrt{\\frac{2I_1}{k_1}},\n\\]\n\n\\[\nV_X=V_{b1}-V_{T2}-\\sqrt{\\frac{2I_1}{k_2}}.\n\\]\n\nThe second equation is the principal cascode-bias design equation:\n\n\\[\n\\boxed{V_{b1}=V_X+V_{T2}+V_{OV2}}.\n\\]\n\n### Saturation requirements\n\nFor \\(M_1\\),\n\n\\[\nV_{DS1}=V_X \\ge V_{\\text{in}}-V_{T1}.\n\\]\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}=V_{\\text{out}}-V_X\n\\ge V_{GS2}-V_{T2},\n\\]\n\nwhich simplifies to\n\n\\[\n\\boxed{V_{\\text{out}}\\ge V_{b1}-V_{T2}}.\n\\]\n\nAlso, \\(M_2\\) must be on:\n\n\\[\nV_{b1}-V_X>V_{T2}.\n\\]\n\nThe upper source \\(I_1\\) must have sufficient compliance:\n\n\\[\nV_{DD}-V_{\\text{out}}\\ge V_{\\text{compliance}}.\n\\]\n\nWith ideal zero-output-resistance devices and an ideal current source, the exact \\(V_{\\text{out}}\\) is not uniquely determined; finite channel-length modulation and the current source's finite output resistance establish the actual DC value.\n\n---\n\n## 3. Small-signal behavior\n\nAt signal frequencies, \\(V_{DD}\\) and \\(V_{b1}\\) are AC grounds.\n\n- \\(M_1\\) provides input transconductance \\(g_{m1}\\).\n- \\(M_2\\) is a common-gate stage with transconductance \\(g_{m2}\\).\n- \\(r_{o1}\\) and \\(r_{o2}\\) are the transistor output resistances.\n\nTypical values are\n\n\\[\ng_{mi}=\\sqrt{2k_iI_1},\n\\qquad\nr_{oi}\\simeq \\frac{1}{\\lambda_i I_1}.\n\\]\n\nFor an ideal current-source load and neglecting body effect, the exact low-frequency nodal result is\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-g_{m1}r_{o1}\\left(1+g_{m2}r_{o2}\\right)\n}.\n\\]\n\nFor a high-gain cascode, \\(g_{m2}r_{o2}\\gg1\\), so\n\n\\[\n\\boxed{\nA_v\\approx\n-g_{m1}g_{m2}r_{o1}r_{o2}\n}.\n\\]\n\nThe negative sign indicates inversion: an increase in \\(V_{\\text{in}}\\) generally produces a decrease in \\(V_{\\text{out}}\\).\n\nA commonly used cascode approximation is\n\n\\[\nA_v\\approx-g_{m1}R_{\\text{cascode}},\n\\]\n\nwhere the intrinsic output resistance is\n\n\\[\n\\boxed{\nR_{\\text{cascode}}\n=\nr_{o2}+r_{o1}+g_{m2}r_{o1}r_{o2}\n\\approx g_{m2}r_{o1}r_{o2}\n}.\n\\]\n\nIf the upper current source has finite output resistance \\(R_I\\), the total output resistance is\n\n\\[\nR_{\\text{out}}=R_I\\parallel R_{\\text{cascode}}.\n\\]\n\nBody effect reduces the effective common-gate transconductance and therefore lowers both the gain and output resistance.\n\n---\n\n## 4. Practical characteristics\n\n- **High voltage gain:** approximately \\(g_{m2}r_{o2}\\) greater than that of a lone common-source stage.\n- **High output impedance:** \\(M_2\\) suppresses the influence of \\(M_1\\)'s output resistance.\n- **High input impedance:** the input is connected to \\(M_1\\)'s gate, so DC input current is negligible.\n- **Output swing:**\n  \\[\n  V_{\\text{out,min}}\\approx V_{b1}-V_{T2},\n  \\]\n  to keep \\(M_2\\) saturated, and\n  \\[\n  V_{\\text{out,max}}\\approx V_{DD}-V_{\\text{compliance}}.\n  \\]\n- **Bias sensitivity:** \\(V_{b1}\\) must be coordinated with the voltage at \\(X\\). In practical wide-signal-range cascode circuits, \\(V_{b1}\\) is often generated by a replica or feedback bias circuit that tracks \\(X\\).\n\nIn summary, the circuit is an NMOS cascode voltage amplifier with a large gain and output resistance, provided that \\(M_1\\) and \\(M_2\\) remain saturated and the upper current source retains sufficient compliance.",
        "format": "markdown",
        "sha256": "0fc3de6bc6215c00571ec4e7ee1ac2cf86d75dc9f94bfd3b2b06dfc649381d25"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The body-effect comment is secondary and does not change the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1641,
        "output_tokens": 25239,
        "total_tokens": 26880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24012,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1536,
        "input_tokens": 1641,
        "output_tokens": 25239,
        "total_tokens": 26880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24012,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Yes. It is a **cascode amplifier** with a resistive load:\n\n- **\\(M_1\\)** is the common-source input transistor, driven by \\(V_{in}\\).\n- **\\(M_2\\)** is the common-gate cascode transistor, biased by the constant voltage \\(V_{b1}\\).\n- The drain of \\(M_1\\) connects to the source of \\(M_2\\), and the output is taken from the drain of \\(M_2\\).\n\nAssuming \\(M_1\\) and \\(M_2\\) are both in saturation, \\(M_2\\) keeps the drain voltage of \\(M_1\\) approximately constant, thereby increasing output resistance and gain. It may also be described as a **source-degenerated/common-gate stacked-MOSFET stage** rather than a “cascode current source,” since the load is a resistor.",
        "format": "markdown",
        "sha256": "72b5ae35325fb86288a3ae7913afebc4eaed2a9f6b60c10aea62a7c2721b620f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device; M1 is a PMOS source follower.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1711,
        "input_tokens": 1712,
        "output_tokens": 554,
        "total_tokens": 2266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1711,
        "input_tokens": 1712,
        "output_tokens": 554,
        "total_tokens": 2266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Yes. It is a **basic NMOS cascode amplifier**:\n\n- \\(M_1\\) is the **common-source input transistor**, driven by \\(V_{\\text{in}}\\).\n- \\(M_2\\) is the **common-gate cascode transistor**, with its gate biased by \\(V_{b1}\\).\n- The source of \\(M_2\\) connects to the drain of \\(M_1\\), forming the cascode node.\n- \\(V_{\\text{out}}\\) is taken from the drain of \\(M_2\\), with \\(R_D\\) acting as the load.\n\nThis arrangement provides higher output resistance and voltage gain than a simple common-source stage, provided both transistors are properly biased and operate in saturation.",
        "format": "markdown",
        "sha256": "945683b1ec1598c63e1f1254cc2fcd2cd28f994181609525a7a9e3d92559c132"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, not a common-source input transistor, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1711,
        "input_tokens": 1712,
        "output_tokens": 646,
        "total_tokens": 2358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1711,
        "input_tokens": 1712,
        "output_tokens": 646,
        "total_tokens": 2358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 498,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Yes. It is a **resistively loaded NMOS cascode amplifier**:\n\n- \\(M_1\\) is the **common-source input transistor**, with \\(V_{\\text{in}}\\) at its gate.\n- \\(M_2\\) is the **common-gate cascode transistor**, biased by \\(V_{b1}\\).\n- The source of \\(M_2\\) is connected to the drain of \\(M_1\\), and \\(V_{\\text{out}}\\) is taken from the drain of \\(M_2\\).\n\nFor proper cascode operation, both transistors should normally be saturated, especially \\(M_2\\). This arrangement increases output resistance and gain compared with a simple common-source amplifier.",
        "format": "markdown",
        "sha256": "6eef34c8e083332886966c5a9515146648df19424a40c0d3cade2c4b6141195f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and treats M1 as common-source. M1 is a PMOS source follower with its drain grounded, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1711,
        "input_tokens": 1712,
        "output_tokens": 1159,
        "total_tokens": 2871,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1711,
        "input_tokens": 1712,
        "output_tokens": 1159,
        "total_tokens": 2871,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** occurs when a parasitic capacitance, typically \\(C_{gd}\\), connects two nodes whose voltages vary oppositely. For a common-source amplifier,\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd}(1+|A_v|),\n\\]\n\nbecause the large, inverted output voltage appears across \\(C_{gd}\\), greatly increasing the capacitance seen at the input.\n\nIn a **cascode**, the input transistor’s drain is an internal node rather than the output node. The upper common-gate transistor presents a low incremental resistance at its source, approximately \\(1/g_m\\), so this internal node changes only slightly with input voltage. Consequently:\n\n- The \\(C_{gd}\\) of the input transistor is connected between the input and a nearly fixed cascode node, not between the input and output.\n- It therefore sees little voltage multiplication and appears at the input mainly as its physical \\(C_{gd}\\), without the large Miller multiplier.\n- The upper transistor’s \\(C_{gd}\\) connects the output to its bias node, so it affects output capacitance and bandwidth rather than directly producing Miller multiplication at the input.\n\nThus, although the overall cascode can have high voltage gain, the parasitic capacitance responsible for Miller multiplication is largely isolated from that gain. Any capacitance actually connected directly between input and output can still exhibit a Miller effect.",
        "format": "markdown",
        "sha256": "ae616f5439ac4c6901568625809d0ea7d4f2e2abf4b0053d16f7a450d0a00092"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance source of the common-gate device and why the input transistor’s Cgd is isolated from the full cascode gain. However, calling the internal node nearly fixed and the Miller effect little risks overstating the reduction: its gain is typically around −1, so Cgd still has a Miller factor of roughly 2, not merely its physical capacitance.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 215,
        "output_tokens": 2203,
        "total_tokens": 2418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 215,
        "output_tokens": 2203,
        "total_tokens": 2418,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** multiplies a parasitic input–output capacitance because the output voltage swings in the opposite direction to the input:\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{\\mu}(1+|A_v|)\n\\]\n\nfor an inverting amplifier with gain \\(A_v\\).\n\nIn a **cascode**:\n\n- The lower transistor is common-source, but its drain is connected to the **source of the upper common-gate transistor**, not directly to the output.\n- The common-gate transistor presents a low impedance at that node, so the local voltage gain from the input to the lower transistor’s drain is roughly\n\n\\[\nA_x \\approx -\\frac{g_{m1}}{g_{m2}},\n\\]\n\nwhich is usually close to unity.\n- Therefore, the lower transistor’s drain–gate capacitance experiences only a small Miller multiplication, approximately\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd1}(1+|A_x|) \\approx 2C_{gd1},\n\\]\n\nrather than being multiplied by the potentially large overall cascode gain.\n- The upper transistor also isolates the output from the input; its drain–gate capacitance connects to a fixed or AC-grounded bias node rather than directly to the signal input.\n\nThus, even though a cascode can have high overall voltage gain, **Miller multiplication depends on the gain across the particular feedback capacitor**, and the cascode greatly reduces that gain and the direct input–output feedback.",
        "format": "markdown",
        "sha256": "005daed718dd9c794bd49b1ad947a63b5f11fdd3c32beced491862aebd4b1415"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly unity local gain across the input transistor’s Cgd, giving about 2× rather than full-stage-gain Miller multiplication. The secondary statement about the upper transistor’s gate capacitance does not undermine the essential explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 215,
        "output_tokens": 1818,
        "total_tokens": 2033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 215,
        "output_tokens": 1818,
        "total_tokens": 2033,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1523,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The Miller effect increases the capacitance seen at the input of a common-source stage because a large voltage gain causes the drain–gate capacitance \\(C_{gd}\\) to appear multiplied:\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{gd}(1+|A_v|)\n\\]\n\nIn a cascode, the input transistor’s drain is an **internal node** rather than the final output. The common-gate cascode transistor presents a relatively low resistance, approximately \\(1/g_{m2}\\), at this node, so its voltage swing is much smaller than the overall output swing. Thus the local gain is roughly\n\n\\[\nA_{v,\\text{internal}} \\approx -\\frac{g_{m1}}{g_{m2}},\n\\]\n\nrather than the much larger overall gain \\(g_{m1}R_{\\text{out}}\\). The Miller multiplication of the input transistor’s \\(C_{gd}\\) is therefore much smaller.\n\nAlso, the upper transistor’s \\(C_{gd}\\) connects the output to its common-gate node, not directly to the amplifier input, so it does not produce the same input Miller multiplication.\n\nHence, a cascode largely isolates the input from large output-voltage swings, reducing the effective input capacitance and making the Miller effect less pronounced. It does not eliminate all Miller effects—parasitic output-to-input coupling can still cause them.",
        "format": "markdown",
        "sha256": "3585a83beac200aff67a890b09d041d6f7d37d28cea45ad3a502190ac9e2626f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the resulting local gain of roughly −gm1/gm2 across the input transistor’s Cgd, limiting Miller multiplication compared with the full stage gain. The omitted body-effect term and approximate factor of about 2 are minor.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 215,
        "output_tokens": 2475,
        "total_tokens": 2690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 215,
        "output_tokens": 2475,
        "total_tokens": 2690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2204,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nReading the transistor symbols carefully:\n\n- \\(M_1\\) is a p-channel MOSFET with  \n  \\[\n  S_1=V_{DD},\\qquad G_1=V_{b2},\\qquad D_1=V_{out}.\n  \\]\n  It acts as the upper bias-current-source load.\n\n- \\(M_2\\) is an n-channel MOSFET with  \n  \\[\n  S_2=V_{in},\\qquad G_2=V_{b1},\\qquad D_2=V_{out}.\n  \\]\n\nThus \\(M_2\\) is a **common-gate transistor**: the input is applied to its source, its gate is held at the bias voltage \\(V_{b1}\\), and the output is taken from its drain. This is not an ordinary common-source stage.\n\nThe dc current path is\n\n\\[\nV_{DD}\\rightarrow M_1\\rightarrow V_{out}\\rightarrow M_2\\rightarrow V_{in}.\n\\]\n\n---\n\n## 2. DC operation\n\nDefine\n\n\\[\n\\beta_i=\\mu_i C_{ox}(W/L)_i.\n\\]\n\n### Upper pMOS \\(M_1\\)\n\nIts source-to-gate overdrive is\n\n\\[\nV_{OV1}=V_{DD}-V_{b2}-|V_{TP1}|.\n\\]\n\nFor \\(M_1\\) to conduct,\n\n\\[\nV_{DD}-V_{b2}>|V_{TP1}|.\n\\]\n\nWhen saturated,\n\n\\[\nI_{D1}\\simeq \\frac{\\beta_1}{2}\n\\left(V_{DD}-V_{b2}-|V_{TP1}|\\right)^2.\n\\]\n\nThe pMOS remains in saturation provided\n\n\\[\nV_{SD1}\\ge V_{OV1},\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{V_{out}\\le V_{b2}+|V_{TP1}|}.\n\\]\n\n### Lower nMOS \\(M_2\\)\n\nBecause \\(V_{in}\\) is connected to its source,\n\n\\[\nV_{GS2}=V_{b1}-V_{in},\n\\]\n\nand its overdrive is\n\n\\[\nV_{OV2}=V_{b1}-V_{in}-V_{TN2}.\n\\]\n\nTherefore \\(M_2\\) turns on when\n\n\\[\n\\boxed{V_{in}<V_{b1}-V_{TN2}}.\n\\]\n\nWhen saturated,\n\n\\[\nI_{D2}\\simeq \\frac{\\beta_2}{2}\n\\left(V_{b1}-V_{in}-V_{TN2}\\right)^2.\n\\]\n\nIts saturation condition is\n\n\\[\nV_{DS2}\\ge V_{OV2},\n\\]\n\nwhich reduces to\n\n\\[\n\\boxed{V_{out}\\ge V_{b1}-V_{TN2}}.\n\\]\n\nThe dc operating point is obtained from\n\n\\[\nI_{D1}(V_{out})=I_{D2}(V_{in},V_{out}).\n\\]\n\n---\n\n## 3. Voltage transfer behavior\n\n- **High \\(V_{in}\\):**  \n  \\(V_{GS2}\\) decreases, \\(M_2\\) turns off, and \\(M_1\\) charges \\(V_{out}\\) toward \\(V_{DD}\\).\n\n- **Lower \\(V_{in}\\):**  \n  \\(V_{GS2}\\) increases, \\(M_2\\) sinks more current, and \\(V_{out}\\) decreases.\n\nThus the output has a **non-inverting dependence on the input**: increasing \\(V_{in}\\) raises \\(V_{out}\\).\n\nThe saturation-current balance occurs approximately at\n\n\\[\n\\frac{\\beta_1}{2}V_{OV1}^2\n=\n\\frac{\\beta_2}{2}V_{OV2}^2,\n\\]\n\nor\n\n\\[\n\\boxed{\nV_{in}^{*}\n=\nV_{b1}-V_{TN2}\n-\n\\sqrt{\\frac{\\beta_1}{\\beta_2}}\n\\left(V_{DD}-V_{b2}-|V_{TP1}|\\right)\n}.\n\\]\n\nAround this point:\n\n- If \\(I_{D2}<I_{D1}\\), \\(V_{out}\\) moves high and \\(M_1\\) enters the triode region.\n- If \\(I_{D2}>I_{D1}\\), \\(V_{out}\\) moves low and \\(M_2\\) enters the triode region.\n\nA useful bias point should satisfy\n\n\\[\n\\boxed{\nV_{b1}-V_{TN2}<V_{out,Q}<V_{b2}+|V_{TP1}|\n}\n\\]\n\nso that both devices can be saturated.\n\nWith ideal square-law devices and no channel-length modulation, if \\(I_{D1}=I_{D2}\\) exactly, the output is not uniquely determined; it can lie anywhere in the saturation-overlap interval. Channel-length modulation and the load resolve this ambiguity in a practical circuit.\n\n---\n\n## 4. Small-signal behavior\n\nAssume \\(V_{DD}\\), \\(V_{b1}\\), and \\(V_{b2}\\) are ideal bias supplies and therefore AC ground.\n\n- \\(M_1\\) has both gate and source at AC ground, so it contributes only its output resistance \\(r_{o1}\\).\n- \\(M_2\\) is a common-gate device with\n  \\[\n  v_{gs2}=-v_{in}.\n  \\]\n\nFor an output load \\(R_L\\), the voltage gain is\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m2}+g_{o2}}\n{g_{o1}+g_{o2}+1/R_L}\n}\n\\]\n\nwhere \\(g_{oi}=1/r_{oi}\\). Normally \\(g_{o2}\\ll g_{m2}\\), giving\n\n\\[\n\\boxed{\nA_v\\simeq +g_{m2}\n\\left(r_{o1}\\parallel r_{o2}\\parallel R_L\\right)\n}.\n\\]\n\nThe gain is positive. With an ideal current-source load and finite \\(r_{o2}\\),\n\n\\[\nA_v\\simeq 1+g_{m2}r_{o2}.\n\\]\n\nThe output resistance, with the input source set to zero, is approximately\n\n\\[\n\\boxed{\nR_{out}\\simeq r_{o1}\\parallel r_{o2}\\parallel R_L\n}.\n\\]\n\nSince the signal enters the source rather than the gate, the input resistance is finite and is typically of order\n\n\\[\n\\boxed{R_{in}\\sim \\frac{1}{g_{m2}}},\n\\]\n\nrather than the very high gate-input resistance of a common-source stage.\n\n---\n\n## 5. Practical characteristics\n\n- It is a **common-gate amplifier**, not an inverter.\n- It has a non-inverting gain.\n- It avoids the Miller multiplication associated with a common-source input, giving relatively good bandwidth.\n- The input is applied to the source, so normal operation requires \\(V_{out}>V_{in}\\).\n- The low output is generally close to the input source voltage plus a channel-voltage drop; it is not necessarily near ground.\n- \\(M_1\\)'s gate bias \\(V_{b2}\\) sets the available load current and hence the input range and switching point.\n- If either body is biased separately rather than tied to its source, body effect must be included in the threshold voltages and small-signal gain.",
        "format": "markdown",
        "sha256": "ea1e3ac71ba0fbe5a0498c5fffe12133bf5412c52a03b3d04d0ed4a91e9badf2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, and gives the non-inverting gain, low input resistance, and equivalent gain expression. This meets the full-credit rule; the minor body-effect simplification does not change the conclusion.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 29778,
        "total_tokens": 31302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 29778,
        "total_tokens": 31302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28310,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit identification\n\nReading the rotated symbol of \\(M_2\\) carefully, \\(V_{b1}\\) is connected to its **gate**:\n\n| Device | Type | Gate | Source | Drain | Role |\n|---|---|---|---|---|---|\n| \\(M_1\\) | PMOS | \\(V_{b2}\\) | \\(V_{DD}\\) | \\(V_{\\text{out}}\\) | Active-load/current source |\n| \\(M_2\\) | NMOS | \\(V_{b1}\\) | \\(V_{\\text{in}}\\) | \\(V_{\\text{out}}\\) | Common-gate input device |\n\nThus, the circuit is an **NMOS common-gate amplifier with a PMOS current-source load**. The gate of \\(M_2\\) is at a constant DC bias \\(V_{b1}\\) and is AC-grounded for small-signal analysis.\n\nThe quiescent current path is\n\n\\[\nV_{DD}\\rightarrow M_1\\rightarrow V_{\\text{out}}\\rightarrow M_2\\rightarrow V_{\\text{in}}.\n\\]\n\nConsequently, the input source must sink the quiescent drain current.\n\n---\n\n## 2. DC bias\n\nFor \\(M_2\\),\n\n\\[\nV_{GS2}=V_{b1}-V_{\\text{in}},\\qquad\nV_{DS2}=V_{\\text{out}}-V_{\\text{in}}.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nV_{SG1}=V_{DD}-V_{b2},\\qquad\nV_{SD1}=V_{DD}-V_{\\text{out}}.\n\\]\n\nAt equilibrium,\n\n\\[\nI_{D1}=I_{D2}=I_Q.\n\\]\n\nNeglecting body effect and channel-length modulation, in saturation\n\n\\[\nI_Q=\n\\frac{1}{2}k_1\\left(V_{DD}-V_{b2}-|V_{TP1}|\\right)^2\n\\]\n\nand\n\n\\[\nI_Q=\n\\frac{1}{2}k_2\\left(V_{b1}-V_{\\text{in}}-V_{TN2}\\right)^2,\n\\]\n\nwhere \\(k_i=\\mu C_{\\text{ox}}(W/L)_i\\). Hence, for a selected bias current,\n\n\\[\nV_{\\text{in},Q}\n=\nV_{b1}-V_{TN2}\n-\n\\sqrt{\\frac{k_1}{k_2}}\n\\left(V_{DD}-V_{b2}-|V_{TP1}|\\right).\n\\]\n\n### Region-of-operation requirements\n\nFor \\(M_2\\) to be saturated,\n\n\\[\nV_{DS2}\\ge V_{GS2}-V_{TN2}\n\\quad\\Longrightarrow\\quad\nV_{\\text{out}}\\ge V_{b1}-V_{TN2}.\n\\]\n\nFor \\(M_1\\) to be saturated,\n\n\\[\nV_{SD1}\\ge V_{SG1}-|V_{TP1}|\n\\quad\\Longrightarrow\\quad\nV_{\\text{out}}\\le V_{b2}+|V_{TP1}|.\n\\]\n\nThus a useful allowable output range is approximately\n\n\\[\n\\boxed{V_{b1}-V_{TN2}\\le V_{\\text{out}}\\lesssim V_{b2}+|V_{TP1}|}.\n\\]\n\nThe absolute DC value of \\(V_{\\text{out}}\\) is ultimately set by the finite output conductances, channel-length modulation, and any external load. With ideal zero-\\(\\lambda\\) devices and both transistors saturated, the current equation alone does not uniquely determine \\(V_{\\text{out}}\\).\n\n---\n\n## 3. Small-signal operation\n\nSince \\(V_{b1}\\) is AC-grounded,\n\n\\[\nv_{gs2}=-v_{\\text{in}}.\n\\]\n\nA positive input change reduces \\(V_{GS2}\\), thereby reducing \\(I_{D2}\\). The PMOS \\(M_1\\) initially continues supplying nearly the same current, so \\(V_{\\text{out}}\\) rises. Therefore,\n\n\\[\n\\boxed{\\text{The voltage gain is non-inverting.}}\n\\]\n\nWith both devices saturated and body effect neglected,\n\n\\[\nA_v=\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_{m2}+g_{o2}}{g_{o1}+g_{o2}},\n\\]\n\nwhere \\(g_{oi}=1/r_{oi}\\). For the usual case \\(g_{m2}\\gg g_{o2}\\),\n\n\\[\n\\boxed{\nA_v\\approx +g_{m2}\\left(r_{o1}\\parallel r_{o2}\\right)\n}\n\\]\n\nThe positive sign distinguishes this common-gate stage from the inverting common-source amplifier.\n\n### Input resistance\n\nLooking into the source of \\(M_2\\),\n\n\\[\n\\boxed{R_{\\text{in}}\\approx \\frac{1}{g_{m2}}}\n\\]\n\nunder the usual first-order approximation. Thus, unlike a common-source stage, the input resistance is relatively low.\n\n### Output resistance\n\nWith the input source set to zero, both \\(M_1\\) and \\(M_2\\) contribute their output conductances:\n\n\\[\n\\boxed{\nR_{\\text{out}}\\approx r_{o1}\\parallel r_{o2}\n}\n\\]\n\nso the output resistance is high.\n\n---\n\n## 4. Practical considerations\n\n- **Common-gate operation:** The input is applied to the source of \\(M_2\\), while its gate is held fixed. This gives low input resistance, non-inverting gain, good input/output isolation, and little Miller multiplication, so bandwidth is generally good.\n- **Saturation is essential:** If \\(M_2\\) enters the triode region, the gain becomes strongly dependent on the output voltage. If \\(M_1\\) leaves saturation, its effective load resistance falls and the gain also decreases.\n- **Body effect:** If the body of \\(M_2\\) follows its source, body effect is suppressed. If its body is tied to a fixed rail, \\(V_{SB2}\\) changes with \\(V_{\\text{in}}\\), causing threshold-voltage variation, distortion, and modified gain.\n- **Bias quality:** \\(V_{b1}\\) and \\(V_{b2}\\) should be low-impedance, low-noise AC grounds. Noise or variation on \\(V_{b2}\\) directly modulates the PMOS load current.\n- **Input DC current:** Even though the MOS gate draws negligible current, \\(M_2\\)'s source current flows into the input source; therefore the input source must be able to sink \\(I_Q\\).\n\nIn summary, this is a **non-inverting, low-input-impedance, high-output-impedance common-gate voltage amplifier**, with \\(M_1\\) acting as the bias-current source and active load.",
        "format": "markdown",
        "sha256": "c26d767f26b5c474515cced025681ff8837c89aa3dcf82065b6a3bd89501915d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, and gives the non-inverting gain and low input resistance. Its gain expression is equivalent to the expected finite-output-resistance expression with body effect neglected; the stated Rin approximation is explicitly acceptable.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1524,
        "output_tokens": 29651,
        "total_tokens": 31175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1524,
        "output_tokens": 29651,
        "total_tokens": 31175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nReading the MOSFET source arrows in the figure:\n\n- \\(M_1\\) is a pMOS:\n  - source \\(=V_{DD}\\)\n  - drain \\(=V_{\\text{out}}\\)\n  - gate \\(=V_{b2}\\)\n- \\(M_2\\) is an nMOS:\n  - source \\(=V_{\\text{in}}\\)\n  - drain \\(=V_{\\text{out}}\\)\n  - gate \\(=V_{b1}\\)\n\nThus the dc current path is\n\n\\[\nV_{DD}\\rightarrow M_1\\rightarrow V_{\\text{out}}\\rightarrow M_2\\rightarrow V_{\\text{in}}.\n\\]\n\nAs drawn, this is **not a conventional CMOS inverter**. It is more naturally viewed as a **common-gate nMOS stage \\(M_2\\) with a pMOS current-source load \\(M_1\\)**.\n\n---\n\n## 2. DC operating conditions\n\nDefine\n\n\\[\n\\begin{aligned}\nV_{SG1}&=V_{DD}-V_{b2},&\nV_{SD1}&=V_{DD}-V_{\\text{out}},\\\\\nV_{GS2}&=V_{b1}-V_{\\text{in}},&\nV_{DS2}&=V_{\\text{out}}-V_{\\text{in}}.\n\\end{aligned}\n\\]\n\nFor enhancement-mode devices:\n\n### \\(M_1\\) conducts when\n\n\\[\nV_{SG1}>|V_{TP}|\n\\quad\\Longleftrightarrow\\quad\nV_{b2}<V_{DD}-|V_{TP}|.\n\\]\n\n### \\(M_2\\) conducts when\n\n\\[\nV_{GS2}>V_{TN}\n\\quad\\Longleftrightarrow\\quad\nV_{b1}>V_{\\text{in}}+V_{TN}.\n\\]\n\nThe saturation conditions are\n\n\\[\nM_1:\\quad V_{\\text{out}}\\le V_{b2}+|V_{TP}|,\n\\]\n\n\\[\nM_2:\\quad V_{\\text{out}}\\ge V_{b1}-V_{TN}.\n\\]\n\nTherefore both devices can be saturated simultaneously if\n\n\\[\nV_{b1}-V_{TN}\\le V_{\\text{out}}\\le V_{b2}+|V_{TP}|.\n\\]\n\nWhen both are saturated, current continuity requires\n\n\\[\n\\frac{1}{2}\\beta_n\n\\left(V_{b1}-V_{\\text{in}}-V_{TN}\\right)^2\n=\n\\frac{1}{2}\\beta_p\n\\left(V_{DD}-V_{b2}-|V_{TP}|\\right)^2,\n\\]\n\nwhere\n\n\\[\n\\beta_n=\\mu_n C_{\\text{ox}}\\frac{W_2}{L_2},\n\\qquad\n\\beta_p=\\mu_p C_{\\text{ox}}\\frac{W_1}{L_1}.\n\\]\n\nThis equation is useful for selecting the two bias voltages.\n\n---\n\n## 3. Large-signal behavior\n\n- If \\(M_2\\) is cut off and \\(M_1\\) is on,\n  \\[\n  V_{\\text{out}}\\rightarrow V_{DD}.\n  \\]\n\n- If \\(M_1\\) is cut off and \\(M_2\\) is on,\n  \\[\n  V_{\\text{out}}\\rightarrow V_{\\text{in}}.\n  \\]\n\n- If \\(M_2\\) is strongly on, \\(V_{\\text{out}}\\) follows \\(V_{\\text{in}}\\), with a small \\(V_{DS2}\\) above \\(V_{\\text{in}}\\) needed to carry the current supplied by \\(M_1\\).\n\n- If both devices are off, the output is floating, apart from leakage and capacitive effects.\n\nConsequently, the output is generally constrained to approximately\n\n\\[\nV_{\\text{in}}\\lesssim V_{\\text{out}}\\lesssim V_{DD},\n\\]\n\nand the input source must sink dc current whenever both transistors conduct.\n\n---\n\n## 4. Small-signal behavior\n\nFor small signals, \\(V_{b1}\\), \\(V_{b2}\\), and \\(V_{DD}\\) are ac ground.\n\n- The gate of \\(M_2\\) is at ac ground and its input is applied to the source, so \\(M_2\\) is a **common-gate amplifier**.\n- The pMOS \\(M_1\\) is biased as an active load. Its \\(g_m\\) does not contribute because both its gate and source are at ac ground; only its output conductance \\(g_{o1}=1/r_{o1}\\) matters.\n\nIf both devices remain saturated and body effect is neglected, the voltage gain is approximately\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n\\frac{g_{m2}+g_{o2}}{g_{o1}+g_{o2}}\n\\approx\n\\frac{g_{m2}}{g_{o1}+g_{o2}}\n}\n\\]\n\nwhere \\(g_{o2}=1/r_{o2}\\).\n\nThe transfer is **non-inverting**. Increasing \\(V_{\\text{in}}\\) reduces\n\n\\[\nV_{GS2}=V_{b1}-V_{\\text{in}},\n\\]\n\nso \\(M_2\\) draws less current and \\(V_{\\text{out}}\\) rises.\n\nThe common-gate input resistance is approximately \\(1/g_{m2}\\) when output-resistance feedback is neglected. With finite output conductances,\n\n\\[\nR_{\\text{in}}\n=\n\\frac{g_{o1}+g_{o2}}\n{g_{o1}(g_{m2}+g_{o2})}.\n\\]\n\nWith the input source set to zero, the output resistance is approximately\n\n\\[\nR_{\\text{out}}\\approx r_{o1}\\parallel r_{o2}.\n\\]\n\n---\n\n## 5. Practical bias-selection procedure\n\nFor a desired quiescent point \\((V_{\\text{in},Q},V_{\\text{out},Q},I_Q)\\):\n\n1. Choose \\(V_{b1}\\) so that\n   \\[\n   V_{b1}=V_{\\text{in},Q}+V_{TN}+V_{OV,n}.\n   \\]\n\n2. Choose \\(V_{b2}\\) so that\n   \\[\n   V_{b2}=V_{DD}-|V_{TP}|-V_{OV,p}.\n   \\]\n\n3. Enforce current matching:\n   \\[\n   I_Q=\n   \\frac12\\beta_nV_{OV,n}^2\n   =\n   \\frac12\\beta_pV_{OV,p}^2.\n   \\]\n\n4. Verify\n   \\[\n   V_{b1}-V_{TN}<V_{\\text{out},Q}<V_{b2}+|V_{TP}|.\n   \\]\n\nA numerical operating point cannot be obtained without the supply and bias voltages, input voltage, threshold voltages, and device sizes or \\(\\beta\\) values.",
        "format": "markdown",
        "sha256": "a44d98dc8198ef080d1eb139c0016e46aded9705e92abdde0fe710b9e8c952f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M2’s source, identifies the bias voltages, and gives the non-inverting gain equivalent to gm2(ro1 || ro2) with low input resistance. The extra finite-output-resistance formulas are consistent with the stated assumptions.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 27287,
        "total_tokens": 28811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1524,
        "output_tokens": 27287,
        "total_tokens": 28811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nAlthough several capacitors are shown, there are only two independent dynamic nodes:\n\n1. The gate node of \\(M_1\\), involving \\(C_{GS}\\) and \\(C_{GD}\\).\n2. The common output node, involving \\(C_{GD}\\), \\(C_{DB}\\), \\(C_{DB2}\\), and \\(C_{GD2}\\) (with \\(M_2\\)'s gate at AC ground).\n\nThus the transfer-function denominator is second order, giving **2 poles**, assuming no accidental pole–zero cancellation.",
        "format": "markdown",
        "sha256": "94685a076f64914d936c5b193e833134c82e14b0bb48c1754b46c38cd8d324e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent dynamic nodes and assigns the capacitors to the gate and output nodes appropriately.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2096,
        "output_tokens": 7055,
        "total_tokens": 9151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2096,
        "output_tokens": 7055,
        "total_tokens": 9151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nIn the small-signal equivalent circuit, the DC bias and supply nodes are AC ground. There are only two independent reactive nodes:\n\n1. The gate node of \\(M_1\\), involving \\(C_{GS}\\) and \\(C_{GD}\\).\n2. The output node, involving \\(C_{DB}\\), \\(C_{GD2}\\), \\(C_{DB2}\\), and the other side of \\(C_{GD}\\).\n\nSince \\(C_{GD2}\\) and \\(C_{DB2}\\) both connect the output to AC ground, they do not introduce additional poles. Thus the transfer-function denominator is second order, so \\(V_{\\text{out}}/V_{\\text{in}}\\) has **2 poles**, barring an accidental pole-zero cancellation.",
        "format": "markdown",
        "sha256": "26751a25b7698bba60435a95854dfcd068320f6f41d7e71701347cde32b3dde3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent reactive nodes—the M1 gate and output—and assigns the relevant capacitances to them. The conclusion of two poles is correct.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2096,
        "output_tokens": 6338,
        "total_tokens": 8434,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2096,
        "output_tokens": 6338,
        "total_tokens": 8434,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The circuit has **two poles**.\n\nIn the small-signal model, the only independent capacitive nodes are:\n\n1. **The gate node of \\(M_1\\)**, involving \\(C_{GS}\\) and \\(C_{GD}\\).\n2. **The output/drain node**, involving \\(C_{GD}\\), \\(C_{GD2}\\), \\(C_{DB}\\), and \\(C_{DB2}\\).\n\nThe \\(M_2\\) gate and all supply nodes are AC ground, so their capacitors only load the output node and do not create additional poles. Thus, the voltage-transfer function has a second-order denominator: **two poles**.",
        "format": "markdown",
        "sha256": "4b4fed474c441527492ec963a56cd7239694c66f503de07d423aaf7f0ebde64e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent capacitive nodes—the M1 gate and output—and assigns the coupling and shunt capacitances appropriately, yielding two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2096,
        "output_tokens": 6209,
        "total_tokens": 8305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2096,
        "output_tokens": 6209,
        "total_tokens": 8305,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nAssuming \\(M_1\\) and \\(M_2\\) are nMOS transistors, let\n\n\\[\nv_x=v_{D1}=v_{S2}.\n\\]\n\n- \\(M_1\\): source grounded, drain connected to \\(v_x\\).\n- \\(M_2\\): source connected to \\(v_x\\), drain connected to \\(v_{\\text{out}}\\).\n- Both gates are driven by \\(v_{\\text{in}}\\).\n- \\(R_D\\) is the pull-up load from \\(V_{DD}\\) to \\(v_{\\text{out}}\\).\n\nThus the circuit is a **tied-gate stacked NMOS pull-down**, with \\(M_2\\) used in a cascode/common-gate-like connection around \\(M_1\\). It is not the conventional cascode, in which \\(M_2\\)'s gate is connected to a separate bias voltage.\n\n---\n\n## 2. DC operation\n\nThe terminal voltages are\n\n\\[\nv_{GS1}=v_{\\text{in}},\\qquad\nv_{GS2}=v_{\\text{in}}-v_x,\n\\]\n\n\\[\nv_{DS1}=v_x,\\qquad\nv_{DS2}=v_{\\text{out}}-v_x.\n\\]\n\nSince the transistors are in series,\n\n\\[\nI_{D1}=I_{D2}=I_D=\\frac{V_{DD}-v_{\\text{out}}}{R_D}.\n\\]\n\nUsing the square-law model with \\(\\beta=k_n(W/L)\\),\n\n\\[\nI_D=\n\\begin{cases}\n\\dfrac{\\beta_1}{2}(v_{\\text{in}}-V_{T1})^2,\n& M_1\\text{ saturated},\\\\[6pt]\n\\beta_1\\left[(v_{\\text{in}}-V_{T1})v_x-\\dfrac{v_x^2}{2}\\right],\n& M_1\\text{ triode},\n\\end{cases}\n\\]\n\nand\n\n\\[\nI_D=\n\\begin{cases}\n\\dfrac{\\beta_2}{2}(v_{\\text{in}}-v_x-V_{T2})^2,\n& M_2\\text{ saturated},\\\\[6pt]\n\\beta_2\\left[(v_{\\text{in}}-v_x-V_{T2})(v_{\\text{out}}-v_x)\n-\\dfrac{(v_{\\text{out}}-v_x)^2}{2}\\right],\n& M_2\\text{ triode}.\n\\end{cases}\n\\]\n\n### Important operating-point observation\n\nFor matched transistors:\n\n- \\(M_1\\) saturation requires\n  \\[\n  v_x\\ge v_{\\text{in}}-V_T.\n  \\]\n- Meaningful \\(M_2\\) conduction requires\n  \\[\n  v_x<v_{\\text{in}}-V_T.\n  \\]\n\nTherefore, for equal thresholds, \\(M_1\\) and \\(M_2\\) cannot both be strongly conducting while \\(M_1\\) is saturated. In normal operation:\n\n- \\(M_1\\) is usually in the triode region.\n- \\(M_2\\) can be saturated if the output is sufficiently high.\n- At low output, \\(M_2\\) also enters the triode region.\n\nFor example, neglecting body effect and channel-length modulation, with identical devices and \\(M_1\\) triode and \\(M_2\\) saturated, let \\(V_{OV}=v_{\\text{in}}-V_T\\). Then\n\n\\[\nI_{D1}=\\beta(V_{OV}v_x-\\tfrac12v_x^2),\n\\]\n\n\\[\nI_{D2}=\\frac{\\beta}{2}(V_{OV}-v_x)^2.\n\\]\n\nEquating the currents gives\n\n\\[\nv_x=\\left(1-\\frac{1}{\\sqrt2}\\right)V_{OV},\n\\]\n\n\\[\nI_D=\\frac{\\beta}{4}V_{OV}^2,\n\\]\n\nand therefore\n\n\\[\nv_{\\text{out}}=V_{DD}-R_D\\frac{\\beta}{4}(v_{\\text{in}}-V_T)^2,\n\\]\n\nas long as \\(M_2\\) remains saturated.\n\n### Transfer behavior\n\n- For \\(v_{\\text{in}}\\lesssim V_T\\), the pull-down path is off and\n  \\[\n  v_{\\text{out}}\\approx V_{DD}.\n  \\]\n- As \\(v_{\\text{in}}\\) rises, current increases and\n  \\[\n  v_{\\text{out}}\\downarrow.\n  \\]\n\nHence the stage has an **inverting voltage transfer characteristic**.\n\n---\n\n## 3. Small-signal behavior\n\nNeglecting capacitances and body effect, define\n\n\\[\ng_{m1},g_{m2},\\qquad g_{o1}=\\frac1{r_{o1}},\\qquad\ng_{o2}=\\frac1{r_{o2}},\\qquad G_D=\\frac1{R_D}.\n\\]\n\nThe internal-node and output equations are\n\n\\[\ng_{m1}v_i+g_{o1}v_x\n=\ng_{m2}(v_i-v_x)+g_{o2}(v_o-v_x),\n\\]\n\n\\[\nG_Dv_o+g_{m2}(v_i-v_x)+g_{o2}(v_o-v_x)=0.\n\\]\n\nSolving gives the midband gain\n\n\\[\n\\boxed{\n\\frac{v_o}{v_i}\n=\n-\\frac{\ng_{m1}g_{m2}+g_{m1}g_{o2}+g_{m2}g_{o1}\n}{\n(g_{m2}+g_{o1}+g_{o2})(G_D+g_{o2})+g_{o1}g_{o2}\n}\n}\n\\]\n\nIn the simplified case \\(r_{o1},r_{o2}\\rightarrow\\infty\\),\n\n\\[\n\\boxed{\\frac{v_o}{v_i}\\simeq -g_{m1}R_D}\n\\]\n\nso tying the two gates does **not** produce gain multiplication by \\(g_{m2}\\). The upper transistor mainly provides output isolation and current steering.\n\nFor a transistor in triode, the small-signal parameters are\n\n\\[\ng_m=\\beta v_{DS},\\qquad\ng_o=\\beta\\left(V_{GS}-V_T-v_{DS}\\right),\n\\]\n\nso the more complete expression above should be used for the actual tied-gate operating point.\n\n---\n\n## 4. Input and output resistance\n\n- The MOS gates draw essentially no DC current, so the input resistance is very high.\n- The input capacitance is approximately\n  \\[\n  C_{\\text{in}}\\approx C_{GS1}+C_{GS2}+C_{GB},\n  \\]\n  plus Miller multiplication from \\(C_{GD2}\\).\n\nIf the input source holds both gates at AC ground, the resistance looking into the drain of the stack is approximately\n\n\\[\nR_{\\text{out,int}}\n\\simeq r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2},\n\\]\n\nincluding body effect gives a similar expression with \\(g_{m2}+g_{mb2}\\). The total output resistance is\n\n\\[\nR_{\\text{out}}\\simeq R_D\\parallel R_{\\text{out,int}}.\n\\]\n\nHowever, because \\(M_1\\) commonly operates in triode, \\(r_{o1}\\) is relatively small and the cascode-like output-resistance enhancement is limited.\n\n---\n\n## 5. Main conclusion\n\nThis circuit works as an **inverting, resistor-loaded stacked-NMOS stage**, but it is not a textbook independently biased cascode amplifier.\n\nIts main limitations are:\n\n1. The same input drives both gates.\n2. \\(M_1\\) generally cannot remain saturated while \\(M_2\\) conducts strongly.\n3. \\(M_2\\)'s source moves with the internal node, reducing its effective \\(v_{GS}\\).\n4. \\(M_2\\)'s body effect may further reduce its overdrive.\n5. The stage does not obtain the usual large cascode gain/output-resistance advantage.\n\nIf the intended circuit is a conventional cascode amplifier, \\(M_2\\)'s gate should be connected to an independently chosen bias \\(V_{\\text{bias}}\\), while \\(M_1\\)'s gate receives \\(v_{\\text{in}}\\). This allows \\(M_1\\) to remain saturated and \\(M_2\\) to serve as a high-impedance output current source.",
        "format": "markdown",
        "sha256": "2196cd731f53120d067f368d381c76e93e8d6897b6ee43757466253b98f38ae0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the tied-gate series NMOS topology and that M1 is typically in triode while M2 can be saturated. However, it misses the central conclusion that the pair acts approximately as a single NMOS with a longer effective channel, and instead applies a true-cascode output-resistance model.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1717,
        "output_tokens": 27337,
        "total_tokens": 29054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25675,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1717,
        "output_tokens": 27337,
        "total_tokens": 29054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25675,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nThe circuit is a resistor-loaded series stack of two NMOS transistors:\n\n- \\(M_1\\): source grounded, drain connected to the internal node \\(V_X\\).\n- \\(M_2\\): source connected to \\(V_X\\), drain connected to \\(V_{\\text{out}}\\).\n- Both gates are driven by \\(V_{\\text{in}}\\).\n- \\(R_D\\) pulls \\(V_{\\text{out}}\\) up to \\(V_{DD}\\).\n\nThus, increasing \\(V_{\\text{in}}\\) increases the pull-down current and decreases \\(V_{\\text{out}}\\); the stage has an **inverting voltage transfer characteristic**.\n\nAlthough it resembles a cascode, it is **not a conventional cascode amplifier**, because the gate of \\(M_2\\) is not connected to a separate fixed bias. Consequently, \\(V_{GS2}\\) changes as \\(V_X\\) changes.\n\n---\n\n## 2. DC operating regions\n\nLet\n\n\\[\nV_X=V_{D1}=V_{S2}.\n\\]\n\nThe same current flows through both transistors:\n\n\\[\nI_{D1}=I_{D2}=I_D=\\frac{V_{DD}-V_{\\text{out}}}{R_D}.\n\\]\n\nAssume initially that \\(M_1\\) and \\(M_2\\) are identical, with threshold voltage \\(V_T\\), and neglect body effect and channel-length modulation.\n\n### Important observation\n\nFor equal thresholds, \\(M_1\\) cannot be in saturation while \\(M_2\\) conducts with positive current.\n\nIf \\(M_1\\) were saturated,\n\n\\[\nV_X\\ge V_{\\text{in}}-V_T,\n\\]\n\nand hence\n\n\\[\nV_{GS2}=V_{\\text{in}}-V_X\\le V_T,\n\\]\n\nso \\(M_2\\) would be off. Therefore, whenever the stack conducts,\n\n\\[\n\\boxed{M_1 \\text{ operates in the triode region}}\n\\]\n\nwhile \\(M_2\\) may be in saturation or triode.\n\n### Region 1: Both transistors off\n\nFor \\(V_{\\text{in}}<V_T\\), ideally\n\n\\[\nI_D\\approx 0,\\qquad V_{\\text{out}}\\approx V_{DD}.\n\\]\n\n---\n\n## 3. Equal-device ideal analysis\n\nDefine\n\n\\[\nA=V_{\\text{in}}-V_T,\\qquad\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL.\n\\]\n\nAssume \\(M_1\\) is in triode and \\(M_2\\) is in saturation.\n\nThe drain currents are\n\n\\[\nI_{D1}=\\beta\\left(A V_X-\\frac{V_X^2}{2}\\right),\n\\]\n\nand\n\n\\[\nI_{D2}=\\frac{\\beta}{2}(A-V_X)^2.\n\\]\n\nEquating the currents gives\n\n\\[\n\\beta\\left(A V_X-\\frac{V_X^2}{2}\\right)\n=\n\\frac{\\beta}{2}(A-V_X)^2,\n\\]\n\nwhose physical solution is\n\n\\[\n\\boxed{V_X=\\left(1-\\frac{1}{\\sqrt2}\\right)A}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}(V_{\\text{in}}-V_T)^2}.\n\\]\n\nThe output voltage is consequently\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}\n-\\frac{R_D\\beta}{4}(V_{\\text{in}}-V_T)^2\n}.\n\\]\n\nThis expression is valid while \\(M_2\\) remains in saturation.\n\n### Saturation condition for \\(M_2\\)\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}=V_{\\text{out}}-V_X,\n\\]\n\nand\n\n\\[\nV_{GS2}-V_T=V_{\\text{in}}-V_X-V_T.\n\\]\n\nThus saturation requires\n\n\\[\nV_{\\text{out}}-V_X\n\\ge V_{\\text{in}}-V_X-V_T,\n\\]\n\nor simply\n\n\\[\n\\boxed{V_{\\text{out}}\\ge V_{\\text{in}}-V_T}.\n\\]\n\nThe boundary between saturation and triode operation of \\(M_2\\) is obtained from\n\n\\[\nV_{DD}-\\frac{R_D\\beta}{4}A^2=A,\n\\]\n\ngiving\n\n\\[\n\\boxed{\nA_b=\n\\frac{2}{R_D\\beta}\n\\left[\\sqrt{1+R_D\\beta V_{DD}}-1\\right]\n}.\n\\]\n\nFor \\(V_{\\text{in}}-V_T>A_b\\), \\(M_2\\) enters the triode region. The currents must then be found from\n\n\\[\nI_D=\n\\beta\\left(A V_X-\\frac{V_X^2}{2}\\right),\n\\]\n\n\\[\nI_D=\n\\beta\\left[\n(A-V_X)(V_{\\text{out}}-V_X)\n-\\frac{(V_{\\text{out}}-V_X)^2}{2}\n\\right],\n\\]\n\ntogether with\n\n\\[\nV_{\\text{out}}=V_{DD}-I_DR_D.\n\\]\n\nThese equations normally require numerical solution.\n\n---\n\n## 4. Small-signal voltage gain\n\nFor low-frequency operation, neglecting body effect and channel-length modulation, and assuming \\(M_1\\) is triode and \\(M_2\\) is saturated:\n\n\\[\ng_{m1}^{(\\text{triode})}=\\beta V_X,\n\\]\n\n\\[\ng_{ds1}=\\beta(A-V_X),\n\\]\n\n\\[\ng_{m2}=\\beta(A-V_X).\n\\]\n\nLet \\(v_X\\) and \\(v_{\\text{out}}\\) be the small-signal variations. Current continuity gives\n\n\\[\ng_{m1}v_{\\text{in}}+g_{ds1}v_X\n=\ng_{m2}(v_{\\text{in}}-v_X),\n\\]\n\nso\n\n\\[\n\\frac{v_X}{v_{\\text{in}}}\n=\n\\frac{g_{m2}-g_{m1}}{g_{ds1}+g_{m2}}.\n\\]\n\nAt the equal-device operating point,\n\n\\[\n\\frac{v_X}{v_{\\text{in}}}\n=\n1-\\frac1{\\sqrt2}.\n\\]\n\nThe output equation is\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}\n+\ng_{m2}(v_{\\text{in}}-v_X)=0,\n\\]\n\ngiving\n\n\\[\n\\boxed{\nA_v=\n\\frac{v_{\\text{out}}}{v_{\\text{in}}}\n=\n-g_{m2}R_D\n\\left(1-\\frac{v_X}{v_{\\text{in}}}\\right)\n}.\n\\]\n\nFor identical devices in the \\(M_1\\)-triode, \\(M_2\\)-saturation region,\n\n\\[\n\\boxed{\nA_v\\simeq\n-\\frac{\\beta R_D}{2}(V_{\\text{in}}-V_T)\n}.\n\\]\n\nThe negative sign confirms that the stage is an inverting amplifier.\n\n---\n\n## 5. Practical implications\n\n- At low input, \\(V_{\\text{out}}\\approx V_{DD}\\).\n- As \\(V_{\\text{in}}\\) rises, the stack current increases and \\(V_{\\text{out}}\\) falls.\n- \\(M_1\\) is normally in triode rather than saturation.\n- \\(M_2\\) is in saturation only when\n  \\[\n  V_{\\text{out}}\\ge V_{\\text{in}}-V_T.\n  \\]\n- The gain is lower and more nonlinear when \\(M_2\\) enters triode.\n- If the NMOS bulks are connected to ground, body effect raises \\(V_{T2}\\) as \\(V_X\\) rises, changing the numerical results.\n- If a true high-gain cascode is intended, \\(M_2\\)'s gate should be driven by a separate DC bias rather than directly by \\(V_{\\text{in}}\\).\n\nNumerical bias and gain values require \\(V_{DD}\\), \\(R_D\\), the device dimensions, threshold voltages, and the selected quiescent \\(V_{\\text{in}}\\).",
        "format": "markdown",
        "sha256": "013a483a7f86a7f33e8591af38e54c9f5dabfc85da79276422e260054e79a744"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate series NMOS stack and the lower device's triode operation, but misses the essential conclusion that the pair acts approximately like one NMOS with effective channel length L1 + L2. The detailed amplifier and gain analysis does not replace that central mechanism.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1716,
        "input_tokens": 1717,
        "output_tokens": 22125,
        "total_tokens": 23842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1716,
        "input_tokens": 1717,
        "output_tokens": 22125,
        "total_tokens": 23842,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20575,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nThe circuit consists of two enhancement NMOS transistors connected in series:\n\n- \\(M_1\\): source grounded, gate driven by \\(V_{\\text{in}}\\).\n- \\(M_2\\): drain connected to \\(V_{\\text{out}}\\), source connected to the drain of \\(M_1\\).\n- The gates of both transistors are tied together and driven by \\(V_{\\text{in}}\\).\n- \\(R_D\\) connects \\(V_{\\text{out}}\\) to \\(V_{DD}\\).\n\nThus, \\(M_1\\) is a common-source device and \\(M_2\\) operates as a common-gate/cascode-like device. The signal current is\n\n\\[\nI_D=I_{D1}=I_{D2}.\n\\]\n\nIncreasing \\(V_{\\text{in}}\\) increases \\(I_D\\), increasing the drop across \\(R_D\\), and therefore decreasing \\(V_{\\text{out}}\\). Hence the stage is **inverting**.\n\nA key point is that this is **not a conventional independently biased cascode**, because the gate of \\(M_2\\) is connected to the input rather than to a separate bias voltage.\n\n---\n\n## 2. DC operating point\n\nLet the internal node at the drain of \\(M_1\\) and source of \\(M_2\\) be \\(V_X\\).\n\nAssuming matched long-channel NMOS devices, define\n\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL,\n\\qquad\na=V_{\\text{in}}-V_{TN}.\n\\]\n\nFor \\(V_{\\text{in}}>V_{TN}\\), both transistors cannot be in saturation. If both were saturated, equal current would require equal overdrives, which would imply \\(V_X=0\\), contradicting the saturation requirement of \\(M_1\\).\n\nTherefore, normally:\n\n- \\(M_1\\) is in the triode region.\n- \\(M_2\\) is in saturation, provided the output voltage is sufficiently high.\n\nThe two transistor equations are then\n\n\\[\nI_{D1}=\\beta\\left(aV_X-\\frac{V_X^2}{2}\\right)\n\\]\n\nand\n\n\\[\nI_{D2}=\\frac{\\beta}{2}(a-V_X)^2.\n\\]\n\nSetting \\(I_{D1}=I_{D2}\\) gives the physical solution\n\n\\[\n\\boxed{V_X=\\left(1-\\frac{1}{\\sqrt2}\\right)(V_{\\text{in}}-V_{TN})}\n\\]\n\nand\n\n\\[\n\\boxed{I_D=\\frac{\\beta}{4}(V_{\\text{in}}-V_{TN})^2}.\n\\]\n\nThus, while \\(M_2\\) remains saturated,\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}\n-\n\\frac{\\beta R_D}{4}(V_{\\text{in}}-V_{TN})^2\n}.\n\\]\n\nFor \\(V_{\\text{in}}\\leq V_{TN}\\), both devices are essentially off and\n\n\\[\nV_{\\text{out}}\\approx V_{DD}.\n\\]\n\n### Saturation condition for \\(M_2\\)\n\nFor \\(M_2\\),\n\n\\[\nV_{DS2}=V_{\\text{out}}-V_X,\n\\qquad\nV_{OV2}=V_{\\text{in}}-V_X-V_{TN}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_{\\text{out}}\\geq V_{\\text{in}}-V_{TN}}.\n\\]\n\nIf the output falls below this value, \\(M_2\\) enters the triode region. Its current then depends directly on \\(V_{\\text{out}}\\), the gain decreases, and the output resistance drops. In this region the circuit must be solved using the full triode equations.\n\n---\n\n## 3. Small-signal voltage gain\n\nLet:\n\n- \\(g_{m1},g_{d1}\\): small-signal gate transconductance and drain conductance of \\(M_1\\),\n- \\(g_{m2},g_{o2}\\): transconductance and output conductance of \\(M_2\\),\n- \\(v_g=v_{\\text{in}}\\),\n- \\(v_x\\): small-signal voltage at the internal node.\n\nFor \\(M_2\\) in saturation,\n\n\\[\ni_1=g_{m1}v_g+g_{d1}v_x,\n\\]\n\n\\[\ni_2=g_{m2}(v_g-v_x)+g_{o2}(v_{\\text{out}}-v_x).\n\\]\n\nUsing \\(i_1=i_2\\) and\n\n\\[\n\\frac{v_{\\text{out}}}{R_D}+i_2=0,\n\\]\n\nthe unloaded voltage gain is\n\n\\[\n\\boxed{\nA_v=\n\\frac{v_{\\text{out}}}{v_g}\n=\n-\n\\frac{\ng_{m2}(g_{m1}+g_{d1})+g_{o2}g_{m1}\n}{\n\\frac{1}{R_D}(g_{m2}+g_{d1}+g_{o2})+g_{d1}g_{o2}\n}\n}.\n\\]\n\nFor matched devices in the operating region derived above,\n\n\\[\ng_{m1}\n=\n\\beta V_X\n=\n\\left(1-\\frac1{\\sqrt2}\\right)\\beta a,\n\\]\n\n\\[\ng_{d1}\n=\n\\beta(a-V_X)\n=\n\\frac{\\beta a}{\\sqrt2},\n\\]\n\n\\[\ng_{m2}\n=\n\\frac{\\beta a}{\\sqrt2}.\n\\]\n\nNeglecting channel-length modulation, \\(g_{o2}\\to 0\\), this reduces to\n\n\\[\n\\boxed{\nA_v\n=\n-\\frac{\\beta R_D}{2}(V_{\\text{in}}-V_{TN})\n}.\n\\]\n\nThe negative sign confirms the inversion. If a load \\(R_L\\) is connected at the output, use \\(R_D\\parallel R_L\\) in the small-signal gain calculation, although the DC bias must also be recalculated.\n\n---\n\n## 4. Input and output resistance\n\n- **DC input resistance:** essentially infinite because the input is connected only to MOS gates.\n- **AC input:** capacitive, approximately the sum of the gate capacitances of both transistors, including overlap and Miller effects.\n- **Output resistance:** approximately\n\n\\[\n\\boxed{\nR_{\\text{out,total}}\n=\nR_D\\parallel\n\\frac{g_{m2}+g_{d1}+g_{o2}}{g_{d1}g_{o2}}\n}\n\\]\n\nwhen \\(M_2\\) is saturated. If \\(M_2\\) enters the triode region, this expression no longer applies and the output resistance decreases substantially.\n\n---\n\n## 5. Important practical notes\n\n1. Body effect can raise the threshold voltage of \\(M_2\\), since its source is at \\(V_X>0\\) while its body is normally grounded. The equations above are therefore most accurate when body effect is negligible.\n2. Channel-length modulation and unequal device sizes modify the numerical bias point.\n3. A standard cascode amplifier would bias the gate of \\(M_2\\) separately, allowing \\(M_1\\) to remain saturated and giving a gain close to \\(-g_{m1}R_D\\) and strongly increased output resistance. Those textbook results should not be applied directly to the circuit as drawn.\n\n**Bottom line:** As shown, the circuit is an inverting NMOS stack. For matched ideal devices, \\(M_1\\) normally operates in triode and \\(M_2\\) in saturation, with\n\n\\[\nV_X\\approx0.293(V_{\\text{in}}-V_{TN}),\n\\qquad\nI_D\\approx\\frac{\\beta}{4}(V_{\\text{in}}-V_{TN})^2.\n\\]",
        "format": "markdown",
        "sha256": "758423cfbd2f3ae96bf0b8fd8226b55ec0f16117c3ded1a8b1cada59c0e95e75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate-driven NMOS stack, with M1 in triode and M2 saturated, and its current law is consistent with the matched-device result. But it misses the essential conclusion that the pair behaves approximately like one NMOS with effective channel length L1 + L2, instead focusing on inverter and cascode-style gain analysis.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1716,
        "input_tokens": 1717,
        "output_tokens": 22200,
        "total_tokens": 23917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20676,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1716,
        "input_tokens": 1717,
        "output_tokens": 22200,
        "total_tokens": 23917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20676,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are NMOS transistors operating in saturation and \\(I_1\\) is an ideal tail-current sink:\n\n## 1. Circuit topology\n\nLet \\(V_X\\) be the voltage at the common-source node.\n\nThe circuit is a **source-coupled NMOS pair with a single-ended output**:\n\n- \\(M_1\\) and \\(M_2\\) have their sources connected to node \\(X\\).\n- \\(I_1\\) sinks the total tail current from node \\(X\\) to ground.\n- The drain of \\(M_1\\) is connected directly to \\(V_{DD}\\).\n- The drain of \\(M_2\\) is connected to the output through \\(R_D\\).\n- \\(V_b\\) provides the gate bias for \\(M_2\\), while \\(V_{in}\\) is the input signal.\n\nEquivalently, it may be viewed as:\n\n- \\(M_1\\): a common-drain stage, or source follower,\n- \\(M_2\\): a common-gate stage,\n- followed by the load \\(R_D\\).\n\nAs \\(V_{in}\\) increases relative to \\(V_b\\), \\(M_1\\) takes more of the tail current and \\(M_2\\) takes less. Since the current through \\(R_D\\) decreases, \\(V_{out}\\) rises. Thus the output at the drain of \\(M_2\\) is **non-inverting** with respect to \\(V_{in}-V_b\\).\n\n---\n\n## 2. DC bias\n\nThe common-source-node current equation is\n\n\\[\nI_{D1}+I_{D2}=I_1\n\\]\n\nand\n\n\\[\nV_{out}=V_{DD}-I_{D2}R_D.\n\\]\n\nUsing the square-law model,\n\n\\[\nI_{D1}=\\frac{\\beta_1}{2}(V_{in}-V_X-V_{T1})^2,\n\\qquad\nI_{D2}=\\frac{\\beta_2}{2}(V_b-V_X-V_{T2})^2.\n\\]\n\nThese equations, together with \\(I_{D1}+I_{D2}=I_1\\), determine \\(V_X\\).\n\n### Matched, balanced case\n\nIf \\(M_1\\) and \\(M_2\\) are matched and\n\n\\[\nV_{in,Q}=V_b,\n\\]\n\nthen the tail current divides equally:\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{V_{out,Q}=V_{DD}-\\frac{I_1R_D}{2}}.\n\\]\n\nWith \\(I_D=\\frac{\\beta}{2}V_{OV}^2\\), the common-source voltage is\n\n\\[\n\\boxed{V_X=V_b-V_T-\\sqrt{\\frac{I_1}{\\beta}}}.\n\\]\n\nFor matched devices in the square-law region, the large-signal relation can be written using\n\n\\[\n\\Delta V=V_{in}-V_b,\n\\]\n\n\\[\nV_{OV2}=\n\\frac{\\sqrt{4I_1/\\beta-\\Delta V^2}-\\Delta V}{2},\n\\]\n\nand hence\n\n\\[\n\\boxed{\nV_{out}=V_{DD}-\\frac{\\beta R_D}{2}V_{OV2}^{\\,2}\n}.\n\\]\n\nThis expression applies while both devices remain on and saturated.\n\n---\n\n## 3. Small-signal voltage gain\n\nTake \\(V_{DD}\\) and \\(V_b\\) as AC grounds. Neglect channel-length modulation and body effect.\n\nAt the common-source node \\(X\\),\n\n\\[\ng_{m1}(v_{in}-v_x)=g_{m2}v_x,\n\\]\n\nso\n\n\\[\n\\frac{v_x}{v_{in}}=\\frac{g_{m1}}{g_{m1}+g_{m2}}.\n\\]\n\nThe common-gate stage \\(M_2\\) gives\n\n\\[\nv_{out}=g_{m2}R_Dv_x.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\frac{v_{out}}{v_{in}}\n=\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_D\n}.\n\\]\n\nFor matched devices, \\(g_{m1}=g_{m2}=g_m\\):\n\n\\[\n\\boxed{\nA_v=\\frac{v_{out}}{v_{in}}\n=+\\frac{g_mR_D}{2}\n}.\n\\]\n\nThe positive sign is important: this is the single-ended output at the \\(M_2\\) drain.\n\nIf \\(M_1\\) is designed with \\(g_{m1}\\gg g_{m2}\\), it behaves approximately as an ideal source follower and\n\n\\[\nA_v\\approx g_{m2}R_D.\n\\]\n\nWith grounded bulks and body effect included, a useful approximation is\n\n\\[\nA_v\\approx\n\\frac{g_{m1}(g_{m2}+g_{mb2})}\n{g_{m1}+g_{mb1}+g_{m2}+g_{mb2}}R_D.\n\\]\n\nFinite output resistance of the transistors and finite resistance of the tail-current source reduce and modify the gain.\n\n---\n\n## 4. Impedances and output range\n\n- **Input resistance at \\(V_{in}\\):** very high, since it is a MOS gate.\n- **Output resistance:** approximately\n\n\\[\nR_{out}\\approx R_D\\parallel r_{o2},\n\\]\n\nand is usually close to \\(R_D\\).\n\nFor ideal current steering, \\(I_{D2}\\) can vary from zero to \\(I_1\\), giving\n\n\\[\nV_{DD}-I_1R_D \\le V_{out}\\le V_{DD}.\n\\]\n\nThe balanced value \\(V_{DD}-I_1R_D/2\\) lies halfway in this range.\n\nThe main headroom requirement is that \\(M_2\\) remain saturated:\n\n\\[\nV_{out}-V_X\\ge V_{GS2}-V_T,\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{V_{out}\\ge V_b-V_T}.\n\\]\n\nA numerical bias cannot be obtained without the values of \\(V_{in,Q}\\), \\(V_b\\), the transistor parameters, \\(I_1\\), and \\(R_D\\). Also, in a real circuit, device mismatch and channel-length modulation will create a small offset even when \\(V_{in}=V_b\\).",
        "format": "markdown",
        "sha256": "11ae10a012a7954214e999aeb71635e228106d4b22e63dd38789081f64de16a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with the output at M2’s drain. The non-inverting gain expression is also correct under the stated assumptions.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2663,
        "output_tokens": 29284,
        "total_tokens": 31947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2663,
        "output_tokens": 29284,
        "total_tokens": 31947,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are matched NMOS transistors, the circuit is a **source-coupled NMOS differential pair** with a single-ended output at the drain of \\(M_2\\).\n\n- \\(V_{in}\\): signal input applied to \\(M_1\\)\n- \\(V_b\\): reference input applied to \\(M_2\\)\n- \\(I_1\\): tail current source\n- \\(R_D\\): drain load of \\(M_2\\)\n- Output is taken from the \\(M_2\\) drain\n\n## 1. DC operation\n\nLet the common-source voltage be \\(V_S\\), and define\n\n\\[\nK=\\frac{1}{2}\\mu_n C_{ox}\\frac WL\n\\]\n\nso that, neglecting channel-length modulation,\n\n\\[\nI_D=K(V_{GS}-V_{TN})^2.\n\\]\n\nThe branch currents satisfy\n\n\\[\nI_{D1}=K(V_{in}-V_S-V_{TN})^2\n\\]\n\n\\[\nI_{D2}=K(V_b-V_S-V_{TN})^2\n\\]\n\nand the tail-current KCL is\n\n\\[\nI_1=I_{D1}+I_{D2}.\n\\]\n\nThe output voltage is\n\n\\[\n\\boxed{V_{out}=V_{DD}-R_D I_{D2}}.\n\\]\n\n### Balanced condition\n\nWhen\n\n\\[\nV_{in}=V_b=V_{CM},\n\\]\n\nthe pair is balanced:\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_1}{2}.\n\\]\n\nTherefore,\n\n\\[\nV_{OV}=\\sqrt{\\frac{I_1}{2K}}\n\\]\n\n\\[\nV_S=V_{CM}-V_{TN}-V_{OV}\n\\]\n\nand\n\n\\[\n\\boxed{V_{out,Q}=V_{DD}-\\frac{R_D I_1}{2}}.\n\\]\n\nThe transistors must remain saturated. At balance the requirements are approximately\n\n\\[\nV_{DD}-V_S\\ge V_{OV},\n\\]\n\n\\[\nV_{out,Q}-V_S\\ge V_{OV},\n\\]\n\nwith the latter reducing to\n\n\\[\nV_{out,Q}\\ge V_b-V_{TN}.\n\\]\n\nIf this is violated, \\(M_2\\) enters the triode region and the simple gain expression no longer applies.\n\n## 2. Small-signal differential gain\n\nAssume:\n\n- matched devices,\n- ideal tail current source,\n- \\(r_o\\to\\infty\\),\n- both transistors remain saturated.\n\nWith small-signal input variations \\(v_{in}\\) and \\(v_b\\), constant tail current requires\n\n\\[\ni_{d1}+i_{d2}=0.\n\\]\n\nThus,\n\n\\[\ng_m(v_{in}-v_s)+g_m(v_b-v_s)=0\n\\]\n\nor\n\n\\[\nv_s=\\frac{v_{in}+v_b}{2}.\n\\]\n\nThe small-signal change in the \\(M_2\\) drain current is\n\n\\[\n\\Delta i_{D2}\n=g_m(v_b-v_s)\n=-\\frac{g_m}{2}(v_{in}-v_b).\n\\]\n\nSince the drain resistor converts this current change into an output-voltage change,\n\n\\[\nv_{out}=-R_D\\Delta i_{D2}.\n\\]\n\nHence\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}-v_b}\n      =+\\frac{g_mR_D}{2}}.\n\\]\n\nAt the balanced operating point,\n\n\\[\ng_m=2K V_{OV}=\\sqrt{2K I_1},\n\\]\n\nso\n\n\\[\n\\boxed{A_v=\\frac{g_mR_D}{2}}.\n\\]\n\nThe gain is **positive with respect to \\(V_{in}-V_b\\)** because:\n\n- increasing \\(V_{in}\\) causes \\(M_1\\) to take more current,\n- \\(M_2\\) current decreases,\n- the voltage drop across \\(R_D\\) decreases,\n- and \\(V_{out}\\) rises.\n\nIf \\(V_b\\) is an AC ground, then simply\n\n\\[\n\\boxed{\\frac{v_{out}}{v_{in}}\\approx+\\frac{g_mR_D}{2}}.\n\\]\n\nFor an ideal matched pair, the common-mode gain is zero. Finite transistor output resistance, finite tail-source resistance, and mismatch cause common-mode gain and input-referred offset. For example, retaining a matched transistor output conductance \\(g_o\\) and using an ideal tail source gives approximately\n\n\\[\nA_d \\simeq \\frac{g_mR_D}{2+g_oR_D}.\n\\]\n\n## 3. Large-signal current steering\n\nLet\n\n\\[\n\\Delta=V_{in}-V_b.\n\\]\n\nFor matched devices, define \\(x=V_{OV2}\\). Then\n\n\\[\nV_{OV1}=x+\\Delta.\n\\]\n\nWhile both transistors are on,\n\n\\[\nI_1=K\\left[(x+\\Delta)^2+x^2\\right].\n\\]\n\nTherefore,\n\n\\[\nx=\\frac{-\\Delta+\\sqrt{2I_1/K-\\Delta^2}}{2},\n\\]\n\nand\n\n\\[\nI_{D2}=Kx^2,\n\\qquad\nV_{out}=V_{DD}-R_DKx^2.\n\\]\n\nThis gives the monotonic transfer characteristic:\n\n- **\\(V_{in}\\) low:** \\(M_1\\) turns off, \\(M_2\\) carries nearly all \\(I_1\\),\n\n  \\[\n  V_{out}\\approx V_{DD}-R_DI_1.\n  \\]\n\n- **\\(V_{in}=V_b\\):**\n\n  \\[\n  V_{out}=V_{DD}-\\frac{R_DI_1}{2}.\n  \\]\n\n- **\\(V_{in}\\) high:** \\(M_2\\) turns off,\n\n  \\[\n  V_{out}\\approx V_{DD}.\n  \\]\n\nThus the circuit can also be viewed as a comparator or level-shifting stage referenced to \\(V_b\\), with a nominally linear small-signal region around \\(V_{in}=V_b\\).\n\nA numerical bias point and gain require values for \\(I_1\\), \\(R_D\\), \\(V_{DD}\\), \\(V_b\\), and the transistor parameters.",
        "format": "markdown",
        "sha256": "f081e5db44e74ae8f42fcca94e4f2cd4e925a6d142ba681a2b831e434df4f8b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled differential pair with M2’s gate at Vb and output at its drain. The small-signal gain is also correctly non-inverting, consistent with the golden solution.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2663,
        "output_tokens": 22238,
        "total_tokens": 24901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21027,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2663,
        "output_tokens": 22238,
        "total_tokens": 24901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21027,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nLet the common source node of \\(M_1\\) and \\(M_2\\) be \\(S\\), and denote the tail-current source by \\(I_T=I_1\\).\n\n- \\(M_1\\) and \\(M_2\\) have their sources connected together.\n- \\(M_1\\)'s drain is connected directly to \\(V_{DD}\\), so it has no signal-bearing drain load.\n- \\(M_2\\)'s drain is connected to \\(V_{\\text{out}}\\), with \\(R_D\\) connected from \\(V_{DD}\\) to the output.\n- \\(V_b\\) is the DC bias voltage of \\(M_2\\).\n\nFunctionally, this is a source-coupled NMOS pair with a single-ended output. \\(M_1\\) controls the common-source voltage, and \\(M_2\\) converts that source-node variation into an output-voltage variation.\n\n## 2. DC operation\n\nFor saturated NMOS devices,\n\n\\[\nI_T=I_{D1}+I_{D2},\n\\]\n\n\\[\nV_S=V_{\\text{in}}-V_{GS1},\n\\qquad\nV_{GS2}=V_b-V_S,\n\\]\n\nand\n\n\\[\nV_{\\text{out}}=V_{DD}-R_D I_{D2}.\n\\]\n\nUsing the square-law model,\n\n\\[\nI_T=\n\\frac{\\beta_1}{2}\n\\left(V_{\\text{in}}-V_S-V_{T1}\\right)^2+\n\\frac{\\beta_2}{2}\n\\left(V_b-V_S-V_{T2}\\right)^2.\n\\]\n\nThis equation determines the quiescent source voltage and current split.\n\n### Matched, balanced bias\n\nIf\n\n\\[\nV_{\\text{in}}=V_b=V_Q\n\\]\n\nand \\(M_1,M_2\\) are matched, both transistors carry \\(I_T/2\\). With\n\n\\[\n\\beta=\\mu_n C_{\\text{ox}}\\frac WL,\n\\]\n\nthe overdrive voltage is\n\n\\[\nV_{OV}=\\sqrt{\\frac{I_T}{\\beta}},\n\\]\n\nand therefore\n\n\\[\nV_S=V_Q-V_T-V_{OV},\n\\]\n\n\\[\nI_{D1}=I_{D2}=\\frac{I_T}{2},\n\\]\n\n\\[\n\\boxed{V_{\\text{out},Q}=V_{DD}-\\frac{R_D I_T}{2}}.\n\\]\n\nThe output is therefore normally biased well above ground rather than at zero.\n\n## 3. Signal operation\n\nAssume \\(V_b\\) is an AC-grounded bias and consider a positive increment of \\(V_{\\text{in}}\\):\n\n1. The tendency of \\(M_1\\) to conduct increases.\n2. Since the tail current is fixed, the common-source voltage \\(V_S\\) rises.\n3. \\(V_{GS2}=V_b-V_S\\) decreases, so \\(I_{D2}\\) decreases.\n4. The voltage drop across \\(R_D\\) decreases, so \\(V_{\\text{out}}\\) rises.\n\nThus the transfer is **non-inverting**:\n\n\\[\n\\boxed{\\Delta V_{\\text{in}}>0\\quad\\Longrightarrow\\quad\\Delta V_{\\text{out}}>0}.\n\\]\n\nThis differs from a conventional common-source stage because the input drives \\(M_1\\)'s gate and is transferred to \\(M_2\\)'s source.\n\n## 4. Small-signal voltage gain\n\nNeglect channel-length modulation, body effect, and assume the tail current source is ideal. Let\n\n\\[\ng_{m1}=\\frac{\\partial I_{D1}}{\\partial V_{GS1}},\n\\qquad\ng_{m2}=\\frac{\\partial I_{D2}}{\\partial V_{GS2}}.\n\\]\n\nKCL at the common-source node gives\n\n\\[\ng_{m1}(v_{\\text{in}}-v_s)\n+g_{m2}(v_b-v_s)=0,\n\\]\n\nso\n\n\\[\nv_s=\n\\frac{g_{m1}v_{\\text{in}}+g_{m2}v_b}\n{g_{m1}+g_{m2}}.\n\\]\n\nAt the output,\n\n\\[\n\\frac{v_o}{R_D}+g_{m2}(v_b-v_s)=0,\n\\]\n\nwhich leads to\n\n\\[\n\\boxed{\nv_o=\n\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}\n\\left(v_{\\text{in}}-v_b\\right)\n}.\n\\]\n\nTherefore, with \\(V_b\\) fixed,\n\n\\[\n\\boxed{\nA_v\\equiv\\frac{v_o}{v_{\\text{in}}}\n=\n\\frac{g_{m1}g_{m2}R_D}{g_{m1}+g_{m2}}\n}\n\\]\n\nand for matched transistors, \\(g_{m1}=g_{m2}=g_m\\),\n\n\\[\n\\boxed{A_v\\approx \\frac{g_mR_D}{2}}.\n\\]\n\nEquivalently, for equal devices,\n\n\\[\nv_s\\approx \\frac{v_{\\text{in}}}{2},\n\\qquad\nv_o\\approx g_mR_D\\frac{v_{\\text{in}}}{2}.\n\\]\n\nThe output is therefore a single-ended signal proportional to \\(V_{\\text{in}}-V_b\\).\n\n## 5. Effect of finite output resistance\n\nIf \\(g_{o1}\\) and \\(g_{o2}\\) are included, the small-signal equations become\n\n\\[\n(g_{m1}+g_{m2}+g_{o1}+g_{o2})v_s-g_{o2}v_o\n=g_{m1}v_{\\text{in}},\n\\]\n\n\\[\n\\left(\\frac1{R_D}+g_{o2}\\right)v_o\n=(g_{m2}-g_{o2})v_s.\n\\]\n\nFor fixed \\(V_b\\), the resulting gain is\n\n\\[\n\\boxed{\nA_v=\n\\frac{g_{m1}R_D(g_{m2}-g_{o2})}\n{g_{m1}+g_{m2}+g_{o1}+g_{o2}\n+R_Dg_{o2}(g_{m1}+g_{o1}+2g_{o2})}\n}.\n\\]\n\nThis reduces to \\(g_mR_D/2\\) for matched devices when \\(g_o\\ll g_m\\).\n\n## 6. Operating constraints\n\nFor the small-signal model to remain valid:\n\n- **\\(M_2\\) must remain saturated:**\n  \\[\n  V_{\\text{out}}\\ge V_S+V_{GS2}-V_{T2}.\n  \\]\n  In the matched case this is approximately\n  \\[\n  V_{\\text{out}}\\ge V_b-V_T.\n  \\]\n\n- **The tail current source must have sufficient compliance voltage** at node \\(S\\).\n\n- **\\(M_1\\) should remain saturated:**\n  \\[\n  V_{DD}-V_S\\ge V_{GS1}-V_{T1}.\n  \\]\n\n- If \\(M_2\\) enters the triode region, the gain expression changes and the output begins to compress.\n\n- The input impedance is very high because \\(V_{\\text{in}}\\) is applied to a MOS gate.\n\nIn summary, the circuit is a high-input-impedance, single-ended, non-inverting amplifier referenced to \\(V_b\\), with an ideal matched-device gain of approximately \\(g_mR_D/2\\).",
        "format": "markdown",
        "sha256": "3b94f563ffb09b30f7df3b89f0f2bc77f59058ce77f9279595cd6c2d3da66087"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair, with M2 biased at Vb and output at its drain, and derives the non-inverting gain. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2663,
        "output_tokens": 32684,
        "total_tokens": 35347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2663,
        "output_tokens": 32684,
        "total_tokens": 35347,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "“Inductive” here means that, over some frequency range, the real part of the output impedance is positive:\n\n\\[\n\\operatorname{Im}\\{Z_{\\text{out}}\\}>0 .\n\\]\n\nIt does not mean that there is an explicit inductor in the circuit.\n\n### Small-signal analysis\n\nTo measure \\(Z_{\\text{out}}\\), set \\(V_{\\text{in}}=0\\). Thus, the gate of \\(M_1\\) is connected to AC ground through \\(R_S\\). Also, \\(V_{DD}\\) and the fixed bias \\(V_b\\) are AC grounds.\n\nLet \\(v_o\\) be a test voltage at the output, and let \\(v_g\\) be the gate voltage of \\(M_1\\). Including the parasitic \\(C_{GS1}\\) and \\(C_{GD1}\\),\n\n\\[\n\\frac{v_g}{R_S}\n+sC_{GS1}(v_g-v_o)\n+sC_{GD1}v_g=0 .\n\\]\n\nTherefore,\n\n\\[\nv_g=\n\\frac{sR_SC_{GS1}}\n{1+sR_S(C_{GS1}+C_{GD1})}v_o .\n\\]\n\nThe small-signal current leaving the output through \\(M_1\\) is\n\n\\[\ni_{M1}=(g_{m1}+sC_{GS1})(v_o-v_g)\n=\n\\frac{g_{m1}+sC_{GS1}}\n{1+sR_S(C_{GS1}+C_{GD1})}v_o .\n\\]\n\nHence the output admittance can be written approximately as\n\n\\[\nY_{\\text{out}}\n=\nG+sC_{\\text{out}}\n+\n\\frac{g_{m1}+sC_{GS1}}\n{1+sR_S(C_{GS1}+C_{GD1})},\n\\]\n\nwhere\n\n- \\(G\\) contains \\(g_{o1},g_{mb1},g_{o2}\\), and\n- \\(C_{\\text{out}}\\) is the total capacitance from the output to AC ground, including the drain capacitances of \\(M_2\\).\n\nNear DC, this becomes\n\n\\[\nY_{\\text{out}}\n\\simeq\n(g_{m1}+G)\n+sC_{\\text{eff}},\n\\]\n\nwith\n\n\\[\nC_{\\text{eff}}\n=\nC_{\\text{out}}+C_{GS1}\n-g_{m1}R_S(C_{GS1}+C_{GD1}).\n\\]\n\nIf\n\n\\[\nC_{\\text{eff}}<0,\n\\]\n\nthen\n\n\\[\nZ_{\\text{out}}\n\\simeq\n\\frac{1}{g_{m1}+G}\n+\nj\\omega\n\\frac{-C_{\\text{eff}}}{(g_{m1}+G)^2},\n\\]\n\nwhich has a positive imaginary part and is therefore inductive. An approximate equivalent inductance is\n\n\\[\nL_{\\text{eq}}\n=\n\\frac{\ng_{m1}R_S(C_{GS1}+C_{GD1})\n-C_{GS1}-C_{\\text{out}}\n}{\n(g_{m1}+G)^2\n}.\n\\]\n\n### Physical interpretation\n\nThe output voltage feeds back to the gate of \\(M_1\\) through \\(C_{GS1}\\). Because the gate is connected to ground through the finite resistance \\(R_S\\), the gate voltage follows the output with a phase shift. The source-follower transistor then converts this phase-shifted voltage into an output current having a reactive component opposite in sign to that of a normal capacitor—equivalent to a negative output capacitance.\n\nThe drain capacitance of \\(M_2\\) produces ordinary positive capacitive current. If the negative capacitive effect of \\(M_1\\) is larger, the total output admittance has negative susceptance, and its reciprocal, \\(Z_{\\text{out}}\\), is inductive.\n\nAt low frequency, neglecting all capacitances, the impedance is purely resistive:\n\n\\[\nZ_{\\text{out}}(0)\\approx\n\\frac{1}{g_{m1}+g_{mb1}}\n\\parallel r_{o1}\n\\parallel r_{o2}.\n\\]\n\nThus the inductive behavior is a finite-frequency parasitic effect, not the DC output resistance.",
        "format": "markdown",
        "sha256": "66bfad1935f48c414d2c2404426a6864095ec049850d7bea9ad644f9e9451821"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The source-follower analysis correctly derives the Rs–Cgs feedback: with other parasitics neglected, Ceff = Cgs(1 − gmRs), so Rs > 1/gm yields negative susceptance and inductive output impedance. The omitted explicit high-frequency Rs limit and the “real part” wording are minor.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1903,
        "output_tokens": 27529,
        "total_tokens": 29432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26715,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 1903,
        "output_tokens": 27529,
        "total_tokens": 29432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26715,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source follower \\(M_1\\) loaded by \\(M_2\\). The inductive behavior comes from the finite resistance seen at the gate of \\(M_1\\), together with \\(M_1\\)'s parasitic capacitances.\n\n### Small-signal view\n\nTo measure the output impedance, set the independent input \\(v_{in}=0\\). Thus, the gate of \\(M_1\\) is connected to ac ground through \\(R_S\\), rather than being directly grounded.\n\nLet \\(v_o\\) be a test voltage at the output and \\(v_g\\) the gate voltage of \\(M_1\\). Since \\(V_{DD}\\) is ac ground, the gate-node KCL is\n\n\\[\n\\frac{v_g}{R_S}+sC_{gs1}(v_g-v_o)+sC_{gd1}v_g=0,\n\\]\n\nso\n\n\\[\n\\frac{v_g}{v_o}\n=\n\\frac{sR_SC_{gs1}}\n{1+sR_S(C_{gs1}+C_{gd1})}.\n\\]\n\nIgnoring \\(r_{o1}\\) initially, the current entering the output node through \\(M_1\\) is\n\n\\[\ni_1=(g_{m1}+sC_{gs1})(v_o-v_g).\n\\]\n\nTherefore, the output admittance contributed by \\(M_1\\) is\n\n\\[\nY_{o1}=\n\\frac{(g_{m1}+sC_{gs1})(1+sR_SC_{gd1})}\n{1+sR_S(C_{gs1}+C_{gd1})},\n\\]\n\nor equivalently,\n\n\\[\nZ_{o1}=\n\\frac{1+sR_S(C_{gs1}+C_{gd1})}\n{(g_{m1}+sC_{gs1})(1+sR_SC_{gd1})}.\n\\]\n\n### Why this can be inductive\n\nNeglecting \\(C_{gd1}\\) for the moment,\n\n\\[\nZ_{o1}\\simeq\n\\frac{1+sR_SC_{gs1}}{g_{m1}+sC_{gs1}}.\n\\]\n\nAt low frequencies,\n\n\\[\nZ_{o1}\\simeq\n\\frac{1}{g_{m1}}\n+j\\omega\\frac{C_{gs1}}{g_{m1}^{2}}\n\\left(g_{m1}R_S-1\\right).\n\\]\n\nThus, if\n\n\\[\ng_{m1}R_S>1\n\\qquad\\left(\\text{or }R_S>\\frac{1}{g_{m1}}\\right),\n\\]\n\nthe imaginary part of \\(Z_{o1}\\) is positive, so the output impedance is inductive.\n\nPhysically, \\(C_{gs1}\\) passes output current into the gate. Because the gate is connected to ground through a finite \\(R_S\\), \\(v_g\\) becomes phase-shifted relative to \\(v_o\\). The transconductance \\(g_{m1}\\) feeds this phase-shifted voltage back into the output, producing an effective negative output capacitance. A negative shunt capacitance appears externally as an inductive reactance.\n\nMore precisely, including a load capacitance \\(C_L\\) from \\(M_2\\),\n\n\\[\nY_{out}\\simeq G+j\\omega\n\\left[C_L+C_{gs1}(1-g_{m1}R_S)\\right],\n\\]\n\nwhere \\(G\\approx g_{m1}+g_{o1}+g_{o2}>0\\). The impedance is inductive when the bracket is negative.\n\n\\(C_{gd1}\\) mainly determines the additional poles and zeros and therefore the width of the inductive frequency range. The essential point is that a **finite gate resistance** allows phase-shifted capacitive feedback through \\(M_1\\); with an ideally grounded gate, this inductive effect would disappear.",
        "format": "markdown",
        "sha256": "ff7c7832dd2e0c805e11cee65f6e9b0e6bb905b882d977421c1ebd11b4c11a1c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance. It shows that finite gate resistance and Cgs produce positive output reactance when Rs > 1/gm, and correctly explains the phase-shifted capacitive feedback; the omitted explicit high-frequency limit does not undermine the result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1903,
        "output_tokens": 26182,
        "total_tokens": 28085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1903,
        "output_tokens": 26182,
        "total_tokens": 28085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25443,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Strictly speaking, the ideal circuit has a **resistive** output impedance. The inductive behavior appears at finite frequency because of the MOSFET parasitic capacitances—especially \\(C_{gs1}\\)—and the finite resistance \\(R_s\\).\n\n### Small-signal derivation\n\nTo measure \\(Z_{\\text{out}}\\), set \\(V_{\\text{in}}=0\\). The gate of \\(M_1\\) is therefore connected to AC ground through \\(R_s\\), while \\(V_{DD}\\) and \\(V_b\\) are also AC ground.\n\nApply a test voltage \\(v_x\\) at the output. The voltage at the gate of \\(M_1\\) is determined by \\(C_{gs1}\\):\n\n\\[\n\\frac{v_g}{R_s}+sC_{gs1}(v_g-v_x)=0\n\\]\n\nso\n\n\\[\n\\frac{v_g}{v_x}=\\frac{sR_sC_{gs1}}{1+sR_sC_{gs1}}.\n\\]\n\nNeglecting \\(C_{gd}\\) and body capacitance for clarity, the output admittance is\n\n\\[\nY_{\\text{out}}\n=\ng_{o1}+g_{o2}\n+\n\\frac{g_{m1}+sC_{gs1}}{1+sR_sC_{gs1}}.\n\\]\n\nThus\n\n\\[\nZ_{\\text{out}}(s)\n=\n\\frac{1+sR_sC_{gs1}}\n{g_{m1}+g_{o1}+g_{o2}\n+sC_{gs1}\\left[1+R_s(g_{o1}+g_{o2})\\right]}.\n\\]\n\nFor \\(s=j\\omega\\), its imaginary part is\n\n\\[\n\\operatorname{Im}\\{Z_{\\text{out}}\\}\n=\n\\frac{\\omega C_{gs1}(R_sg_{m1}-1)}\n{(g_{m1}+g_{o1}+g_{o2})^2\n+\\omega^2C_{gs1}^2[1+R_s(g_{o1}+g_{o2})]^2}.\n\\]\n\nTherefore, if\n\n\\[\n\\boxed{R_sg_{m1}>1},\n\\]\n\nthe output impedance has a **positive imaginary part**. The output voltage then leads the output current, which is the signature of an inductive impedance.\n\nAt low frequency this can be written as\n\n\\[\nZ_{\\text{out}}\n\\approx\n\\frac{1}{G}\n+\nj\\omega\n\\frac{C_{gs1}(R_sg_{m1}-1)}{G^2},\n\\qquad\nG=g_{m1}+g_{o1}+g_{o2},\n\\]\n\nso the equivalent series inductance is approximately\n\n\\[\n\\boxed{\nL_{\\text{eq}}\\approx\n\\frac{C_{gs1}(R_sg_{m1}-1)}{G^2}\n}.\n\\]\n\n### Physical interpretation\n\nThe output voltage drives \\(C_{gs1}\\), producing a current that flows through \\(R_s\\) and creates a phase-shifted gate voltage. \\(M_1\\)'s transconductance converts this gate-voltage movement into a source current whose phase can oppose the ordinary capacitive current. The net effect can be an **effective negative capacitance** at the output, which is equivalent to inductive behavior over a frequency range.\n\n\\(M_2\\) mainly provides the bias current and contributes \\(r_{o2}\\) as a shunt resistance; it is not the source of the inductance. If all parasitic capacitances are ignored, then\n\n\\[\nZ_{\\text{out}}\\approx\n\\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}},\n\\]\n\nwhich is purely real. Other parasitics, the impedance of the \\(V_b\\) bias source, and package/interconnect inductance can change the actual frequency range over which the measured output impedance is inductive.",
        "format": "markdown",
        "sha256": "3993c58f315a366ea025aad52bd1022e4da3bacc42f68adea4e848e8de06836c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The derivation correctly identifies the Cgs1–Rs feedback mechanism and finds the inductive condition Rs·gm1 > 1. Its voltage-divider expression captures the gate approaching the output at high frequency, and the positive imaginary part confirms inductive behavior; including output conductances is a valid refinement.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1903,
        "output_tokens": 23217,
        "total_tokens": 25120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 1903,
        "output_tokens": 23217,
        "total_tokens": 25120,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nReading the mirrored \\(M_2\\) symbol carefully:\n\n- \\(M_1\\): \\(D_1=V_{\\text{out}},\\;G_1=X,\\;S_1=0\\)\n- \\(M_2\\): \\(D_2=X,\\;G_2=V_{\\text{out}},\\;S_2=0\\)\n- \\(R_{D1}\\) pulls \\(V_{\\text{out}}\\) toward \\(V_{DD}\\)\n- The current source injects \\(I_{\\text{in}}\\) into node \\(X\\)\n\nThus \\(M_1\\) and \\(M_2\\) are **cross-coupled NMOS transistors**, not parallel devices. The circuit is an NMOS regenerative latch/current-controlled inverter.\n\n## 2. Node equations\n\nNeglecting gate leakage,\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}=I_{D1}(V_X,V_{\\text{out}})\n\\]\n\nbecause the gate of \\(M_2\\) draws no DC current, and\n\n\\[\nI_{\\text{in}}=I_{D2}(V_{\\text{out}},V_X)\n\\]\n\nbecause the gate of \\(M_1\\) draws no DC current.\n\nIncluding parasitic capacitances, the transient equations are\n\n\\[\nC_X\\frac{dV_X}{dt}=I_{\\text{in}}-I_{D2},\n\\]\n\n\\[\nC_{\\text{out}}\\frac{dV_{\\text{out}}}{dt}\n=\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}-I_{D1}.\n\\]\n\nHere \\(C_X\\) includes the gate capacitance of \\(M_1\\), drain capacitance of \\(M_2\\), and overlap capacitances.\n\n## 3. Two stable states\n\n### High-output state\n\n\\[\nV_X\\lesssim V_T,\\qquad V_{\\text{out}}\\approx V_{DD}\n\\]\n\n- \\(M_1\\) is off.\n- \\(R_{D1}\\) pulls the output high.\n- The high \\(V_{\\text{out}}\\) turns \\(M_2\\) on, which pulls \\(X\\) low and keeps \\(M_1\\) off.\n\nThis is a stable reset state.\n\n### Low-output state\n\n\\[\nV_X\\gtrsim V_T,\\qquad V_{\\text{out}}\\approx \\text{low}\n\\]\n\n- \\(M_1\\) is on and discharges \\(V_{\\text{out}}\\) through \\(R_{D1}\\).\n- Low \\(V_{\\text{out}}\\) turns \\(M_2\\) off.\n- With \\(M_2\\) off, node \\(X\\) has no low-resistance discharge path, so a high \\(V_X\\) can remain stored on its capacitance.\n\nThis is a stable set state, although it relies on charge storage at \\(X\\) and is therefore more vulnerable to leakage than the high-output state.\n\n## 4. Action of the input current\n\nThe arrow indicates that positive \\(I_{\\text{in}}\\) is injected into \\(X\\).\n\n### Positive input current: set low output\n\n1. \\(I_{\\text{in}}\\) raises \\(V_X\\).\n2. \\(M_1\\) begins conducting and pulls \\(V_{\\text{out}}\\) down.\n3. As \\(V_{\\text{out}}\\) falls, the gate voltage of \\(M_2\\) falls, reducing its drain current.\n4. Less current is removed from \\(X\\), allowing \\(V_X\\) to rise even further.\n5. The feedback reinforces the transition to \\(V_{\\text{out}}\\approx 0\\).\n\nThe regenerative relationships are\n\n\\[\nV_X\\uparrow \\Rightarrow I_{D1}\\uparrow\n\\Rightarrow V_{\\text{out}}\\downarrow\n\\Rightarrow I_{D2}\\downarrow\n\\Rightarrow V_X\\uparrow\n\\]\n\nand\n\n\\[\nV_{\\text{out}}\\uparrow \\Rightarrow I_{D2}\\uparrow\n\\Rightarrow V_X\\downarrow\n\\Rightarrow I_{D1}\\downarrow\n\\Rightarrow V_{\\text{out}}\\uparrow.\n\\]\n\n### Negative input current: reset high output\n\nIf the input can sink current from \\(X\\), negative current lowers \\(V_X\\), turning \\(M_1\\) off. The pull-up resistor then raises \\(V_{\\text{out}}\\), which turns \\(M_2\\) on and pulls \\(X\\) down even faster.\n\nTherefore:\n\n- Positive current into \\(X\\): sets \\(V_{\\text{out}}\\) low.\n- Negative current from \\(X\\): resets \\(V_{\\text{out}}\\) high.\n\nA strictly one-directional current source can set the latch but cannot reset it.\n\n## 5. Approximate high-state behavior\n\nWhile \\(V_{\\text{out}}\\approx V_{DD}\\) and \\(M_2\\) is in the triode region,\n\n\\[\nI_{\\text{in}}\\approx\n\\beta_2\\left[(V_{DD}-V_T)V_X-\\frac{V_X^2}{2}\\right],\n\\]\n\nwhere\n\n\\[\n\\beta_2=\\mu_n C_{\\text{ox}}\\frac{W_2}{L_2}.\n\\]\n\nFor small \\(V_X\\),\n\n\\[\nV_X\\approx\n\\frac{I_{\\text{in}}}{\\beta_2(V_{DD}-V_T)}.\n\\]\n\nIf this voltage remains below the effective threshold of \\(M_1\\), the latch stays in the high-output state. Once \\(M_1\\) starts conducting, positive feedback causes rapid switching.\n\nIn the low-output state, if \\(M_2\\) is off and \\(M_1\\) is strongly conducting,\n\n\\[\nV_{\\text{out}}\\approx\n\\frac{V_{DD}}\n{1+R_{D1}\\beta_1(V_X-V_T)}.\n\\]\n\n## 6. Important practical limitation\n\nIn the low-output state, \\(M_2\\) is off and node \\(X\\) is nearly floating. If a continuous positive \\(I_{\\text{in}}\\) remains applied, ideal transistor models provide no DC path for that current, so \\(X\\) charges further until leakage, gate protection, or device breakdown intervenes. A practical implementation therefore usually needs:\n\n- a bipolar current input capable of sourcing and sinking,\n- an explicit reset transistor at \\(X\\),\n- or a resistor/bias path at \\(X\\).\n\nThe exact trip current depends on \\(V_T\\), \\(W/L\\) of both devices, \\(R_{D1}\\), channel-length modulation, and the initial latch state. The circuit is best analyzed with transient analysis and specified initial conditions rather than as a simple memoryless amplifier.",
        "format": "markdown",
        "sha256": "55425061ed41e26edc4858eb3b1c45676c1c0a52d6c080dab3931021737b8292"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, explains the positive-feedback loop, and describes latching behavior and the resulting lack of a stable linear operating point. Its caveat that a persistent positive input eventually drives X upward also matches the golden solution.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2397,
        "output_tokens": 27257,
        "total_tokens": 29654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2397,
        "output_tokens": 27257,
        "total_tokens": 29654,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nThe mirrored symbol for \\(M_2\\) is important:\n\n| Device | Gate | Drain | Source |\n|---|---|---|---|\n| \\(M_1\\) | \\(X\\) | \\(V_{\\text{out}}\\) | Ground |\n| \\(M_2\\) | \\(V_{\\text{out}}\\) | \\(X\\) | Ground |\n\nThus \\(X\\) is the drain of \\(M_2\\) and the gate of \\(M_1\\). The output is the drain of \\(M_1\\) and the gate of \\(M_2\\). \\(R_{D1}\\) is the pull-up load, and \\(I_{\\text{in}}\\) is injected into node \\(X\\).\n\n## 2. DC equations\n\nAssuming ideal MOS gates draw no current:\n\n- At node \\(X\\):\n  \\[\n  I_{\\text{in}}=I_{D2}\n  \\]\n\n- At the output node:\n  \\[\n  \\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}=I_{D1}\n  \\]\n\nassuming no output load.\n\nFor enhancement-mode NMOS devices in saturation,\n\n\\[\nI_{D1}=\\frac{1}{2}k_1(V_X-V_T)^2,\n\\qquad\nI_{D2}=\\frac{1}{2}k_2(V_{\\text{out}}-V_T)^2,\n\\]\n\nwhere\n\n\\[\nk_i=\\mu_n C_{\\text{ox}}\\frac{W_i}{L_i}.\n\\]\n\nTherefore,\n\n\\[\nI_{\\text{in}}\n=\\frac{1}{2}k_2(V_{\\text{out}}-V_T)^2\n\\]\n\nand\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=\\frac{1}{2}k_1(V_X-V_T)^2.\n\\]\n\nHence the quiescent values are\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=V_T+\\sqrt{\\frac{2I_{\\text{in}}}{k_2}}\n}\n\\]\n\nand\n\n\\[\n\\boxed{\nV_X\n=V_T+\n\\sqrt{\\frac{2\\left(V_{DD}-V_{\\text{out}}\\right)}\n{k_1R_{D1}}}\n}.\n\\]\n\nThus, in saturation, \\(M_2\\) performs a square-law current-to-voltage conversion; \\(M_1\\) and \\(R_{D1}\\) establish the drain voltage \\(V_X\\) of \\(M_2\\).\n\nThe incremental current-to-voltage transfer is approximately\n\n\\[\n\\frac{\\Delta V_{\\text{out}}}{\\Delta I_{\\text{in}}}\n\\simeq \\frac{1}{g_{m2}},\n\\qquad\ng_{m2}=\\sqrt{2k_2I_{\\text{in}}}.\n\\]\n\n## 3. Saturation requirements\n\nThe following must hold:\n\n\\[\nV_{\\text{out}}>V_T,\\qquad V_X>V_T,\n\\]\n\n\\[\nV_{\\text{out}}\\ge V_X-V_T\n\\quad\\text{for }M_1\\text{ saturation},\n\\]\n\n\\[\nV_X\\ge V_{\\text{out}}-V_T\n\\quad\\text{for }M_2\\text{ saturation}.\n\\]\n\nIf either device enters the triode region, the square-law equations must be replaced by\n\n\\[\nI_D=k\\left[(V_{GS}-V_T)V_{DS}-\\frac{V_{DS}^2}{2}\\right],\n\\]\n\nand the two node equations are solved numerically.\n\n## 4. Regenerative nature of the circuit\n\nThe devices are cross-coupled, producing positive feedback:\n\n\\[\nV_{\\text{out}}\\uparrow\n\\Rightarrow I_{D2}\\uparrow\n\\Rightarrow V_X\\downarrow\n\\Rightarrow I_{D1}\\downarrow\n\\Rightarrow V_{\\text{out}}\\uparrow .\n\\]\n\nConsequently, the DC operating point found above is not automatically stable. With a parasitic capacitance \\(C_X\\) at node \\(X\\), the approximate dominant pole is\n\n\\[\ns_p \\approx\n\\frac{\n\\dfrac{g_{m1}g_{m2}}{g_{o1}+1/R_{D1}}-g_{o2}\n}{C_X}.\n\\]\n\nA positive \\(s_p\\) indicates an unstable or regenerative operating point; real output capacitance and loading may lead to hysteresis, switching, or oscillation. Therefore, the boxed equations are the static square-law solution, but transient analysis is needed to verify practical stability.",
        "format": "markdown",
        "sha256": "2f01353641a5f713dbde6abc1ad2cabf53b4c030c1977c64c24c3b809ce42048"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, explains the positive-feedback loop, and recognizes that the operating point can be unstable. These satisfy the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2397,
        "output_tokens": 44472,
        "total_tokens": 46869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 43600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2397,
        "output_tokens": 44472,
        "total_tokens": 46869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 43600,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(M_1\\) and \\(M_2\\) are NMOS transistors with their sources and bodies grounded:\n\n## Circuit topology\n\n- \\(R_{D1}\\) pulls \\(V_{\\text{out}}\\) up to \\(V_{DD}\\).\n- \\(M_1\\) and \\(M_2\\) have their drains connected to \\(V_{\\text{out}}\\), sources grounded, and gates tied together at node \\(X\\).\n- The input current \\(I_{\\text{in}}\\) is injected directly into node \\(X\\).\n\nThus, \\(M_1\\) and \\(M_2\\) act as parallel NMOS pull-down devices controlled by \\(V_X\\).\n\n## Important DC issue: no input-current path\n\nFor an ideal MOSFET, the gate current is zero. KCL at node \\(X\\) therefore gives\n\n\\[\nI_{\\text{in}}=I_{G1}+I_{G2}=0.\n\\]\n\nConsequently:\n\n- For any nonzero \\(I_{\\text{in}}\\), the circuit has no valid DC operating point.\n- For \\(I_{\\text{in}}=0\\), node \\(X\\) is still floating and its voltage is undefined unless gate leakage, an external bias, or some other element establishes it.\n\nThe drain current of \\(M_2\\) cannot provide a return path for current entering the gates because \\(M_2\\)'s drain is connected to \\(V_{\\text{out}}\\), not to \\(X\\). Therefore, \\(M_2\\) is not a diode-connected device and does not bias node \\(X\\).\n\n## Behavior if \\(V_X\\) is externally established\n\nThe output-node equation is\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=\nI_{D1}(V_X,V_{\\text{out}})\n+\nI_{D2}(V_X,V_{\\text{out}}).\n\\]\n\nIf both transistors are saturated, ignoring channel-length modulation,\n\n\\[\nI_{Di}=\\frac{1}{2}\\beta_i(V_X-V_{Ti})^2.\n\\]\n\nFor matched transistors, \\(\\beta_1=\\beta_2=\\beta\\), this becomes\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-R_{D1}\\beta(V_X-V_T)^2\n}\n\\]\n\nprovided that\n\n\\[\nV_{\\text{out}}\\ge V_X-V_T.\n\\]\n\nIf the output falls below \\(V_X-V_T\\), both devices enter the triode region, and\n\n\\[\n\\frac{V_{DD}-V_{\\text{out}}}{R_{D1}}\n=\n2\\beta\\left[(V_X-V_T)V_{\\text{out}}\n-\\frac{V_{\\text{out}}^2}{2}\\right].\n\\]\n\nWith \\(V_X\\) driven by a voltage source, the low-frequency gain from \\(V_X\\) to \\(V_{\\text{out}}\\) is\n\n\\[\n\\boxed{\n\\frac{v_{\\text{out}}}{v_X}\n=\n-\\frac{g_{m1}+g_{m2}}\n{\\frac{1}{R_{D1}}+g_{o1}+g_{o2}}\n}\n\\]\n\nor, for matched devices and \\(r_o\\to\\infty\\),\n\n\\[\n\\frac{v_{\\text{out}}}{v_X}=-2g_mR_{D1}.\n\\]\n\nThus, \\(M_2\\) effectively doubles the pull-down strength of \\(M_1\\); it is not providing cascode gain boosting or DC feedback.\n\n## What happens with a nonzero \\(I_{\\text{in}}\\)\n\nThe input current initially charges the MOSFET gate capacitances:\n\n\\[\nI_{\\text{in}}\\approx C_{\\Sigma}\\frac{dV_X}{dt},\n\\]\n\nwhere \\(C_{\\Sigma}\\) includes the \\(C_{gs}\\), \\(C_{gb}\\), wiring, and other gate capacitances of both transistors. Therefore \\(V_X\\) ramps upward rather than settling:\n\n\\[\nV_X(t)\\approx V_X(0)+\\frac{I_{\\text{in}}}{C_\\Sigma}t.\n\\]\n\nThe output initially equals \\(V_{DD}\\); once \\(V_X\\) exceeds the threshold voltage, the transistors begin pulling the output down. However, \\(X\\) continues charging until leakage or gate-oxide breakdown occurs. At high frequency there may also be coupling through \\(C_{gd}\\), but there is no well-defined low-frequency transimpedance.\n\n## Conclusion\n\nAs drawn, this is **not a valid DC current-input amplifier**:\n\n\\[\n\\boxed{\\text{The input current is injected into an insulated MOS-gate node with no DC return path.}}\n\\]\n\nPossible corrections depend on the intended function:\n\n- Use a voltage source to drive \\(X\\).\n- Add a resistor or diode-connected device from \\(X\\) to ground or a bias rail to establish \\(V_X\\) and provide a current path.\n- Use a common-gate configuration so that the input current enters a channel terminal.\n- Reconnect \\(M_2\\) if it is intended to provide feedback; as drawn, it is simply another parallel output pull-down transistor.",
        "format": "markdown",
        "sha256": "0f0f394fb0510d048c6353d5673e90103b0481e610ff9311e8c4fede90407487"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly places the input current at X and recognizes M1 as a common-source device, but misconnects M2 as a parallel pull-down. In the actual circuit M2’s drain is at X and its gate is tied to Vout, forming positive feedback; therefore the claimed absence of a DC current path and resulting behavior are incorrect.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2397,
        "output_tokens": 16639,
        "total_tokens": 19036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2397,
        "output_tokens": 16639,
        "total_tokens": 19036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15641,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Let \\(V_X\\) denote the \\(M_1\\)-drain/\\(M_2\\)-gate node, \\(V_S\\) the \\(M_1\\)-source/input node, and \\(V_O=V_{\\text{out}}\\). Assume \\(M_1\\) and \\(M_2\\) are NMOS transistors in saturation, with \\(V_{DD}\\) and \\(V_b\\) AC-grounded.\n\n## 1. Circuit function\n\n- \\(M_1\\) is a **common-gate** input device.\n- \\(M_2\\) is a **common-source** second stage.\n- \\(R_F\\) feeds the output voltage back to the source of \\(M_1\\), producing **negative feedback**.\n- The circuit is therefore a **current-to-voltage converter (transresistance amplifier)**.\n\nThe feedback is negative because\n\n\\[\nV_S\\uparrow\n\\Rightarrow I_{D1}\\downarrow\n\\Rightarrow V_X\\uparrow\n\\Rightarrow I_{D2}\\uparrow\n\\Rightarrow V_O\\downarrow,\n\\]\n\nand the fall in \\(V_O\\), through \\(R_F\\), opposes the original increase in \\(V_S\\).\n\n---\n\n## 2. DC bias\n\nNeglecting channel-length modulation,\n\n\\[\nI_{D1}\\simeq \\frac{k_1}{2}(V_b-V_S)^2,\n\\qquad\nI_{D2}\\simeq \\frac{k_2}{2}(V_X-V_{T2})^2.\n\\]\n\nThe node equations are\n\n\\[\nI_{D1}=\\frac{V_{DD}-V_X}{R_{D1}},\n\\]\n\n\\[\nI_{\\text{in}}+I_{D1}=\\frac{V_S-V_O}{R_F},\n\\]\n\nand\n\n\\[\nI_{D2}=I_{\\text{in}}+I_{D1}\n       +\\frac{V_{DD}-V_O}{R_{D2}}.\n\\]\n\nThus, for specified device sizes, \\(V_b\\), and resistor values, these equations determine the quiescent point.\n\nBecause the drawn reference current \\(i_{RF}\\) points from the output toward \\(V_S\\),\n\n\\[\ni_{RF}=\\frac{V_O-V_S}{R_F}\n      =-(I_{\\text{in}}+I_{D1}).\n\\]\n\nTherefore, under this bias, the actual RF current flows from the source node toward the output; \\(i_{RF}\\) is negative with respect to the arrow shown.\n\nThe devices must satisfy\n\n\\[\nV_X-V_S\\ge V_{GS1}-V_{T1},\n\\qquad\nV_O\\ge V_X-V_{T2}.\n\\]\n\n---\n\n## 3. Small-signal behavior\n\nWith \\(r_o\\to\\infty\\), the incremental relations are\n\n\\[\ni_{d1}=-g_{m1}v_S,\n\\qquad\nv_X=g_{m1}R_{D1}v_S,\n\\qquad\ni_{d2}=g_{m2}v_X.\n\\]\n\nKCL at the source and output nodes gives\n\n\\[\ni_{\\text{in}}\n=\\frac{v_S-v_O}{R_F}+g_{m1}v_S,\n\\]\n\n\\[\n\\frac{v_O}{R_{D2}}\n+g_{m2}v_X\n+\\frac{v_O-v_S}{R_F}=0.\n\\]\n\nA finite-gain result is\n\n\\[\n\\boxed{\n\\frac{v_O}{i_{\\text{in}}}\n=\n\\frac{\nR_{D2}\\left(1-g_{m1}g_{m2}R_{D1}R_F\\right)\n}{\n1+g_{m1}(R_F+R_{D2})\n+g_{m1}g_{m2}R_{D1}R_{D2}\n}\n}\n\\]\n\nand the impedance seen by the input-current source is approximately\n\n\\[\n\\boxed{\n\\frac{v_S}{i_{\\text{in}}}\n=\n\\frac{R_F+R_{D2}}\n{\n1+g_{m1}(R_F+R_{D2})\n+g_{m1}g_{m2}R_{D1}R_{D2}\n}\n}.\n\\]\n\n---\n\n## 4. Strong-feedback limit\n\nWith sufficiently high loop gain,\n\n\\[\nv_S\\approx 0,\n\\]\n\nso the \\(M_1\\)-source node is an **AC virtual ground**. The input current then flows through \\(R_F\\), giving\n\n\\[\n\\boxed{\\Delta V_{\\text{out}}\\approx -R_F\\,\\Delta I_{\\text{in}}}\n\\]\n\nand, using the arrow direction shown in the figure,\n\n\\[\n\\boxed{\\Delta i_{RF}\\approx-\\Delta I_{\\text{in}}}.\n\\]\n\nThus \\(R_F\\) directly sets the transresistance: approximately \\(-R_F\\ \\text{V/A}\\).\n\nThe output resistance is roughly\n\n\\[\nR_{\\text{out}}\\approx R_{D2}\\parallel r_{o2}\\parallel R_F\n\\]\n\nunder strong-feedback conditions. Numerical bias, gain, and bandwidth cannot be determined without the device parameters, bias voltage, and parasitic capacitances.",
        "format": "markdown",
        "sha256": "95e3d0307ea36953eb8363bf8d862de28ce9726ad94a767ab9a0994096795760"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2703,
        "output_tokens": 41472,
        "total_tokens": 44175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2703,
        "output_tokens": 41472,
        "total_tokens": 44175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 40490,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assume both transistors are NMOS, \\(V_b\\) is an ideal dc bias, and \\(I_{in}\\) is injected into the source of \\(M_1\\). Define\n\n- \\(v_s\\): source of \\(M_1\\), also the input-current node,\n- \\(v_X\\): drain of \\(M_1\\), also the gate of \\(M_2\\),\n- \\(v_o\\): output.\n\n## 1. Circuit function\n\n- \\(M_1\\) is a common-gate transistor: its gate is fixed at \\(V_b\\), and it senses the voltage at its source.\n- \\(R_{D1}\\) converts the \\(M_1\\) drain current into the gate voltage \\(v_X\\).\n- \\(M_2\\) is a common-source stage that converts \\(v_X\\) into an output-voltage change.\n- \\(R_F\\) feeds part of the output back to the source of \\(M_1\\).\n- \\(I_{in}\\) is the signal; the output is a voltage.\n\nThus, this is a **feedback transimpedance stage**: it attempts to convert an input current into an output voltage.\n\n## 2. DC operation\n\nLet \\(I_1=I_{D1}\\) and \\(I_2=I_{D2}\\). At node \\(v_X\\),\n\n\\[\nI_1=\\frac{V_{DD}-v_X}{R_{D1}}.\n\\]\n\nKCL at the source of \\(M_1\\) gives\n\n\\[\nI_{in}+I_1=\\frac{v_s-v_o}{R_F}. \\tag{1}\n\\]\n\nKCL at the output gives\n\n\\[\n\\frac{V_{DD}-v_o}{R_{D2}}\n+\\frac{v_s-v_o}{R_F}=I_2. \\tag{2}\n\\]\n\nTherefore,\n\n\\[\n\\boxed{v_o=V_{DD}-R_{D2}\\left(I_2-I_{in}-I_1\\right)} \\tag{3}\n\\]\n\nand\n\n\\[\n\\boxed{v_s=v_o+R_F(I_{in}+I_1)}. \\tag{4}\n\\]\n\nThus, the actual dc current through \\(R_F\\) flows from the input/source node toward the output. If \\(i_{RF}\\) is referenced in the direction drawn, from output to source, then\n\n\\[\ni_{RF}=-(I_{in}+I_1).\n\\]\n\nAssuming both MOS devices are saturated and neglecting channel-length modulation,\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_b-v_s-V_{T1})^2,\n\\]\n\n\\[\nv_X=V_{DD}-R_{D1}I_1,\n\\]\n\n\\[\nI_2=\\frac{\\beta_2}{2}(v_X-V_{T2})^2.\n\\]\n\nEquations (1)–(4), together with these device equations, determine the bias point. No numerical operating point can be found without device and resistor values.\n\n## 3. Feedback polarity\n\nFor a positive small-signal change in \\(I_{in}\\):\n\n1. \\(v_s\\) tends to rise.\n2. \\(V_{GS1}=V_b-v_s\\) falls, so \\(I_{D1}\\) decreases.\n3. \\(v_X\\) rises because \\(R_{D1}\\) pulls it upward.\n4. The \\(M_2\\) current increases, pulling \\(v_o\\) downward.\n5. The downward movement of \\(v_o\\) is returned through \\(R_F\\) and opposes the original rise of \\(v_s\\).\n\nThe active loop is therefore **negative feedback**.\n\n## 4. Small-signal transimpedance\n\nLet \\(g_{o1}=1/r_{o1}\\), \\(g_{o2}=1/r_{o2}\\), and assume \\(V_b\\) is ac-grounded.\n\nFrom the \\(v_X\\) node,\n\n\\[\nA_x\\equiv\\frac{v_x}{v_s}\n=\n\\frac{g_{m1}+g_{o1}}\n{1/R_{D1}+g_{o1}}. \\tag{5}\n\\]\n\nThe source-node and output-node equations are\n\n\\[\ni_{in}\n=\n(g_{m1}+g_{o1})v_s-g_{o1}v_x\n+\\frac{v_s-v_o}{R_F},\n\\]\n\n\\[\n(g_{m2}v_x+g_{o2}v_o)\n+\\frac{v_o}{R_{D2}}\n+\\frac{v_o-v_s}{R_F}=0.\n\\]\n\nDefine the closed small-signal gain from the source node to the output as\n\n\\[\n\\alpha\\equiv\\frac{v_o}{v_s}\n=\n\\frac{1/R_F-g_{m2}A_x}\n{g_{o2}+1/R_{D2}+1/R_F}. \\tag{6}\n\\]\n\nThe source equation simplifies to\n\n\\[\ni_{in}\n=\n\\left[\n\\frac{A_x}{R_{D1}}+\\frac{1-\\alpha}{R_F}\n\\right]v_s.\n\\]\n\nHence the transimpedance is\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{\\alpha}\n{A_x/R_{D1}+(1-\\alpha)/R_F}\n}. \\tag{7}\n\\]\n\nIf output conductance is neglected, \\(A_x=g_{m1}R_{D1}\\), and\n\n\\[\n\\alpha=\n\\frac{1/R_F-g_{m1}g_{m2}R_{D1}}\n{1/R_{D2}+1/R_F},\n\\]\n\nso that\n\n\\[\n\\boxed{\n\\frac{v_o}{i_{in}}\n=\n\\frac{1-R_Fg_{m1}g_{m2}R_{D1}}\n{g_{m1}g_{m2}R_{D1}\n+g_{m1}(1+R_F/R_{D2})\n+1/R_{D2}}\n}. \\tag{8}\n\\]\n\nThe sign depends on the parameters:\n\n- If \\(R_Fg_{m1}g_{m2}R_{D1}>1\\), a positive input-current change produces a negative output-voltage change.\n- If \\(R_Fg_{m1}g_{m2}R_{D1}<1\\), the output change is positive.\n\nThe small-signal resistance looking into the input/source node is\n\n\\[\n\\boxed{\nR_{in,s}=\n\\frac{1}\n{A_x/R_{D1}+(1-\\alpha)/R_F}\n}.\n\\]\n\n## 5. Bias and headroom requirements\n\nFor normal operation:\n\n- \\(M_1\\) must be on:\n  \\[\n  V_b-v_s>V_{T1}.\n  \\]\n- \\(M_1\\) must be saturated:\n  \\[\n  v_X\\ge V_b-V_{T1}.\n  \\]\n- \\(M_2\\) must be on:\n  \\[\n  v_X>V_{T2}.\n  \\]\n- \\(M_2\\) must remain saturated:\n  \\[\n  v_o\\ge v_X-V_{T2}.\n  \\]\n- The output must remain between its allowable lower and upper limits.\n\nIn practice, \\(R_F\\) is not just a sensing resistor: it loads the output and redistributes current between \\(M_1\\), \\(M_2\\), and the current source. Consequently, an exact bias and gain require the full nonlinear operating-point equations, and the ac feedback stability should be checked using the transistor parasitic capacitances.",
        "format": "markdown",
        "sha256": "145d24afc5dcca93c2d5f7c427780973e515c34c12b7fe4748b30fa5197ff0be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input feedback forming a transimpedance amplifier. It also correctly identifies the feedback as negative, satisfying the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2702,
        "input_tokens": 2703,
        "output_tokens": 49005,
        "total_tokens": 51708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2702,
        "input_tokens": 2703,
        "output_tokens": 49005,
        "total_tokens": 51708,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 47539,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Let\n\n- \\(v_X\\): \\(M_1\\) drain and \\(M_2\\) gate,\n- \\(v_S\\): \\(M_1\\) source and input-current-source node,\n- \\(v_O=V_{\\text{out}}\\): \\(M_2\\) drain.\n\nSince component values and device parameters are not given, a numerical operating point cannot be found, but the topology, bias equations, feedback action, and small-signal transimpedance can be determined.\n\n## 1. Circuit topology\n\n- \\(M_1\\) is a common-gate transistor whose gate is biased at \\(V_b\\).\n- \\(R_{D1}\\) is the drain load of \\(M_1\\). It converts the drain current of \\(M_1\\) into the control voltage \\(V_X\\).\n- \\(M_2\\) is a common-source stage with drain load \\(R_{D2}\\).\n- \\(R_F\\) couples the output back to the source node of \\(M_1\\).\n- The circuit is therefore a **current-input transimpedance stage with negative feedback**.\n\nThe output is not simply \\(V_{DD}-I_{D2}R_{D2}\\), because \\(R_F\\) changes the operating point.\n\n## 2. DC equations\n\nDefine\n\n- \\(I_1\\): current through \\(M_1\\) from \\(V_X\\) to \\(v_S\\),\n- \\(I_2\\): drain current of \\(M_2\\),\n- \\(i_{RF}=(V_O-v_S)/R_F\\), positive from the output toward the source node.\n\nKCL gives\n\n\\[\n\\frac{V_{DD}-V_X}{R_{D1}}=I_1,\n\\]\n\n\\[\n\\frac{V_{DD}-V_O}{R_{D2}}=I_2+i_{RF},\n\\]\n\n\\[\nI_{\\text{in}}+I_1+i_{RF}=0.\n\\]\n\nThus\n\n\\[\ni_{RF}=-(I_{\\text{in}}+I_1),\n\\]\n\nand\n\n\\[\nV_O=v_S-R_F(I_{\\text{in}}+I_1).\n\\]\n\nThese are signed equations. In the usual bias condition \\(I_1>0\\), the physical feedback current is opposite the reference arrow, so the arrow-referenced \\(i_{RF}\\) is negative.\n\nIf both MOSFETs are in saturation,\n\n\\[\nI_1 \\simeq \\frac{\\beta_1}{2}\n\\left(V_b-v_S-V_{T1}\\right)^2,\n\\]\n\n\\[\nI_2 \\simeq \\frac{\\beta_2}{2}\n\\left(V_X-V_{T2}\\right)^2,\n\\]\n\nwith\n\n\\[\nV_X=V_{DD}-I_1R_{D1}.\n\\]\n\nThese equations are solved together with the feedback equations above. The saturation checks are\n\n\\[\nV_X-v_S\\ge V_{OV1},\n\\qquad\nV_O\\ge V_{OV2}.\n\\]\n\nBody effect should be included in \\(V_{T1}\\) if \\(v_S\\) is appreciably above ground.\n\n## 3. Feedback action\n\nFor a positive, upward input-current perturbation:\n\n\\[\nI_{\\text{in}}\\uparrow\n\\Rightarrow v_S\\uparrow\n\\Rightarrow V_{GS1}\\downarrow\n\\Rightarrow I_1\\downarrow\n\\Rightarrow V_X\\uparrow\n\\Rightarrow I_2\\uparrow\n\\Rightarrow V_O\\downarrow.\n\\]\n\nThe fall in \\(V_O\\) acts through \\(R_F\\) to pull \\(v_S\\) back down, opposing the original disturbance. Therefore the feedback is negative.\n\nFor example, starting with an output disturbance \\(V_O\\downarrow\\):\n\n\\[\nV_O\\downarrow\n\\Rightarrow v_S\\downarrow\n\\Rightarrow I_1\\uparrow\n\\Rightarrow V_X\\downarrow\n\\Rightarrow I_2\\downarrow\n\\Rightarrow V_O\\uparrow.\n\\]\n\nThe loop therefore opposes both input-current and output-voltage disturbances.\n\n## 4. Low-frequency small-signal transimpedance\n\nNeglecting parasitic capacitances and including channel-length modulation,\n\n\\[\ni_{d1}=g_{m1}(v_X-v_S)+g_{o1}(v_X-v_S),\n\\]\n\n\\[\ni_{d2}=g_{m2}v_X+g_{o2}v_O.\n\\]\n\nThe node equations are\n\n\\[\n\\frac{v_X}{R_{D1}}+(g_{m1}+g_{o1})(v_X-v_S)=0,\n\\]\n\n\\[\n\\frac{v_O}{R_{D2}}+g_{o2}v_O+g_{m2}v_X\n+\\frac{v_O-v_S}{R_F}=0,\n\\]\n\n\\[\ni_{\\text{in}}+\\frac{v_O-v_S}{R_F}\n+(g_{m1}+g_{o1})(v_X-v_S)=0.\n\\]\n\nDefine\n\n\\[\n\\alpha=\n\\frac{g_{m1}+g_{o1}}\n{g_{m1}+g_{o1}+1/R_{D1}},\n\\]\n\nso that \\(v_X=\\alpha v_S\\), and\n\n\\[\nK=\n\\frac{1/R_F-g_{m2}\\alpha}\n{1/R_{D2}+g_{o2}+1/R_F},\n\\]\n\nso that \\(v_O=K v_S\\). Then\n\n\\[\n\\boxed{\n\\frac{v_O}{i_{\\text{in}}}\n=\n\\frac{K}\n{(1-K)/R_F+\\alpha/R_{D1}}\n}\n\\]\n\nfor the input-current direction shown.\n\nThe corresponding small-signal resistance of the input node is\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{v_S}{i_{\\text{in}}}\n=\n\\frac{1}\n{(1-K)/R_F+\\alpha/R_{D1}}\n}.\n\\]\n\n### High-loop-gain approximation\n\nNormally,\n\n\\[\ng_{m1}R_{D1}\\gg1 \\quad\\Rightarrow\\quad \\alpha\\approx1,\n\\]\n\nand the effective gain of the \\(M_2\\) stage is approximately\n\n\\[\nA\\approx g_{m2}R_{D2}.\n\\]\n\nIf \\(A\\gg1\\), \\(R_{D1}\\) is sufficiently large, and the loop is correctly biased, then\n\n\\[\n\\frac{v_O}{i_{\\text{in}}}\n\\simeq\n-\\frac{A R_F}{1+A}\n\\;\\approx\\;\n\\boxed{-R_F}.\n\\]\n\nThus an incremental increase in the upward input current produces an approximately equal voltage decrease at the output:\n\n\\[\n\\boxed{\\Delta V_{\\text{out}}\\approx -R_F\\,\\Delta I_{\\text{in}}}.\n\\]\n\n## 5. Practical considerations\n\n- The usual operating condition for the intended feedback polarity is approximately\n  \\[\n  g_{m2}\\alpha R_F>1.\n  \\]\n- Both transistors must remain in their intended regions; otherwise the gain and transimpedance expressions change.\n- Large input current can drive the output toward a supply rail and remove feedback.\n- At high frequency, \\(C_{gs}\\), \\(C_{gd}\\), the load at \\(V_X\\), and parasitic capacitance across \\(R_F\\) add poles. The loop gain and phase must be checked for stability.\n- If an output load is present, replace \\(R_{D2}\\) by its parallel combination with that load in the small-signal analysis.\n\nIn summary, the circuit is a feedback transimpedance amplifier: \\(M_1\\) senses the input-current-node voltage, \\(M_2\\) supplies voltage gain, and \\(R_F\\) closes a negative-feedback loop whose ideal incremental transimpedance is approximately \\(-R_F\\).",
        "format": "markdown",
        "sha256": "ebf89ea064fa9c8d494f2d764b0a16882c98dab502daae461041e9ebf51e333e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input node, forming a transimpedance amplifier. It also gives the expected approximate −RF transimpedance.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2702,
        "input_tokens": 2703,
        "output_tokens": 37071,
        "total_tokens": 39774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2702,
        "input_tokens": 2703,
        "output_tokens": 37071,
        "total_tokens": 39774,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 35571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nLet the lower common node be \\(V_X\\), and denote the current of the unlabeled downward source by \\(I_B\\).\n\nThe intended devices are:\n\n- \\(M_2\\): pMOS, with\n  \\[\n  S=VDD,\\qquad D=V_X,\\qquad G=V_{out}\n  \\]\n- \\(M_1\\): nMOS, with\n  \\[\n  D=V_{out},\\qquad S=V_X,\\qquad G=V_b\n  \\]\n- \\(I_1\\): injects current into \\(V_{out}\\).\n- \\(I_{in}\\): injects current into \\(V_X\\).\n- \\(I_B\\): sinks current from \\(V_X\\).\n\nThus the dc current paths are\n\n\\[\nV_{DD}\\rightarrow I_1\\rightarrow V_{out}\\rightarrow M_1\\rightarrow V_X\n\\]\n\nand\n\n\\[\nV_{DD}\\rightarrow M_2\\rightarrow V_X,\n\\]\n\nwhile \\(I_{in}\\) also feeds \\(V_X\\).\n\nThis is best viewed as a **feedback-regulated current-balance/current-to-voltage stage**, rather than a conventional current mirror.\n\n---\n\n## 2. DC current balance\n\nIf an output load draws a downward current \\(I_L\\), KCL gives\n\n\\[\nI_{D1}=I_1-I_L\n\\]\n\nat \\(V_{out}\\), and\n\n\\[\nI_{D2}+I_{D1}+I_{in}=I_B\n\\]\n\nat \\(V_X\\). Consequently,\n\n\\[\n\\boxed{I_{D2}=I_B-I_1+I_L-I_{in}}\n\\]\n\nFor the open-circuit output shown in the figure, \\(I_L=0\\), so\n\n\\[\n\\boxed{I_{D1}=I_1},\\qquad\n\\boxed{I_{D2}=I_B-I_1-I_{in}}.\n\\]\n\nTherefore, for normal operation,\n\n\\[\nI_B>I_1+I_{in}.\n\\]\n\nThe value of the unlabeled lower current source is therefore essential for determining the output voltage.\n\n---\n\n## 3. Output voltage\n\nAssume both transistors operate in saturation and define\n\n\\[\nk_n=\\mu_n C_{ox}(W/L)_1,\\qquad\nk_p=\\mu_p C_{ox}(W/L)_2.\n\\]\n\nFor \\(M_1\\),\n\n\\[\nI_{D1}=\\frac{k_n}{2}\\left(V_b-V_X-V_{TN1}\\right)^2,\n\\]\n\nso for the open-circuit output,\n\n\\[\n\\boxed{\nV_X=V_b-V_{TN1}-\\sqrt{\\frac{2I_1}{k_n}}\n}.\n\\]\n\nThus \\(V_X\\) is essentially fixed by \\(I_1\\), \\(V_b\\), and \\(M_1\\).\n\nFor the pMOS \\(M_2\\),\n\n\\[\nI_{D2}=\\frac{k_p}{2}\n\\left(V_{DD}-V_{out}-|V_{TP2}|\\right)^2.\n\\]\n\nSubstituting the current-balance result gives\n\n\\[\n\\boxed{\nV_{out}\n=\nV_{DD}-|V_{TP2}|\n-\\sqrt{\n\\frac{2\\left(I_B-I_1-I_{in}\\right)}{k_p}\n}\n}.\n\\]\n\nIf an output load is present, replace the term in parentheses by\n\n\\[\nI_B-I_1+I_L-I_{in}.\n\\]\n\nFor a resistive load, \\(I_L=V_{out}/R_L\\), so the result becomes an implicit equation.\n\n---\n\n## 4. Qualitative operation\n\n- \\(I_1\\) fixes the drain current of \\(M_1\\) when the output is unloaded.\n- \\(V_b\\) and \\(I_1\\) establish the lower-node voltage \\(V_X\\).\n- If \\(I_{in}\\) increases, \\(M_2\\) must supply less current to maintain current balance at \\(V_X\\).\n- Since \\(M_2\\) is a pMOS, it supplies less current when \\(V_{out}\\) rises.\n- Therefore, increasing \\(I_{in}\\) produces a positive change in \\(V_{out}\\):\n\n\\[\n\\boxed{\\frac{\\partial V_{out}}{\\partial I_{in}}>0}.\n\\]\n\nNeglecting channel-length modulation,\n\n\\[\n\\boxed{\n\\frac{\\partial V_{out}}{\\partial I_{in}}\n\\approx \\frac{1}{g_{m2}}\n}\n\\]\n\nwhere\n\n\\[\ng_{m2}=\\sqrt{2k_p I_{D2}}.\n\\]\n\nThe feedback is negative: an increase in \\(V_{out}\\) reduces the current through \\(M_2\\), which moves \\(V_X\\) downward and increases the current through \\(M_1\\), opposing the original increase.\n\n---\n\n## 5. Operating limits\n\nFor \\(M_1\\) to remain in saturation,\n\n\\[\nV_{out}-V_X\\ge V_{GS1}-V_{TN1},\n\\]\n\nor equivalently,\n\n\\[\nV_{out}\\ge V_b-V_{TN1}.\n\\]\n\nFor \\(M_2\\) to remain in saturation,\n\n\\[\nV_{DD}-V_X\\ge V_{SG2}-|V_{TP2}|,\n\\]\n\nor\n\n\\[\nV_{out}\\ge V_X-|V_{TP2}|.\n\\]\n\nAs \\(I_{in}\\) approaches \\(I_B-I_1\\), the required \\(M_2\\) current approaches zero and\n\n\\[\nV_{out}\\rightarrow V_{DD}-|V_{TP2}|.\n\\]\n\nFor larger \\(I_{in}\\), \\(M_2\\) turns off and the above conversion relation no longer applies.\n\n### Overall conclusion\n\nThe circuit converts an input-current variation into an output-voltage variation:\n\n\\[\nI_{in}\\uparrow \\quad\\Longrightarrow\\quad V_{out}\\uparrow,\n\\]\n\nwith approximate gain \\(1/g_{m2}\\). A numerical result cannot be obtained without the value of the lower current source, the MOS parameters, and any output load.",
        "format": "markdown",
        "sha256": "da14816e22d8d43e492910aebff27034882ea41774fd9223786c5ea627529bb9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback through the input node, and gives the correct current-to-voltage gain of approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2550,
        "output_tokens": 56474,
        "total_tokens": 59024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 55298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2550,
        "output_tokens": 56474,
        "total_tokens": 59024,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 55298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## 1. Circuit topology\n\nLet \\(V_X\\) be the internal node joining the source of \\(M_1\\), the drain of \\(M_2\\), \\(I_{in}\\), and the unlabeled current sink. Denote the current of that unlabeled downward source by \\(I_Q\\).\n\nFrom the device arrows:\n\n- \\(M_1\\) is an NMOS:\n  \\[\n  D=V_{out},\\qquad S=V_X,\\qquad G=V_b\n  \\]\n- \\(M_2\\) is a PMOS:\n  \\[\n  S=V_{DD},\\qquad D=V_X,\\qquad G=V_{out}\n  \\]\n- \\(I_1\\) injects current from \\(V_{DD}\\) into \\(V_{out}\\).\n- \\(I_{in}\\) injects current from ground into \\(V_X\\).\n- \\(I_Q\\) pulls current from \\(V_X\\) to ground.\n\nAn important detail is that the **gate of \\(M_2\\) is connected to \\(V_{out}\\)**; \\(M_2\\)'s drain is connected to \\(V_X\\), not directly to the output.\n\n---\n\n## 2. DC analysis\n\nIgnoring gate current and assuming no output load, KCL at the output gives\n\n\\[\nI_{D1}=I_1.\n\\]\n\nThus \\(M_1\\) operates as a fixed-current sink. KCL at \\(V_X\\) is\n\n\\[\nI_{D2}+I_{D1}+I_{in}=I_Q,\n\\]\n\nso\n\n\\[\n\\boxed{I_{D2}=I_Q-I_1-I_{in}}.\n\\]\n\nTherefore, the circuit requires\n\n\\[\nI_{in}\\le I_Q-I_1\n\\]\n\nfor a valid static operating point with all currents in the indicated directions.\n\n### Voltage at \\(V_X\\)\n\nAssuming \\(M_1\\) is in saturation and using the square-law model,\n\n\\[\nI_1=\\frac{\\beta_1}{2}(V_b-V_X-V_{T1})^2,\n\\]\n\nwhere\n\n\\[\n\\beta_1=\\mu_n C_{ox}(W/L)_1.\n\\]\n\nHence\n\n\\[\n\\boxed{\nV_X=V_b-V_{T1}-\\sqrt{\\frac{2I_1}{\\beta_1}}\n}.\n\\]\n\nThus \\(V_b\\) establishes the internal source-node voltage and the compliance of \\(M_1\\).\n\n### Output voltage\n\nFor \\(M_2\\), assuming saturation,\n\n\\[\nI_{D2}=\\frac{\\beta_2}{2}\n\\left(V_{DD}-V_{out}-|V_{T2}|\\right)^2,\n\\]\n\nwhere\n\n\\[\n\\beta_2=\\mu_p C_{ox}(W/L)_2.\n\\]\n\nUsing \\(I_{D2}=I_Q-I_1-I_{in}\\),\n\n\\[\n\\boxed{\nV_{out}\\simeq\nV_{DD}-|V_{T2}|\n-\\sqrt{\\frac{2\\left(I_Q-I_1-I_{in}\\right)}{\\beta_2}}\n}.\n\\]\n\nConsequently:\n\n- Increasing \\(I_{in}\\) reduces the required \\(M_2\\) current.\n- Reducing the PMOS current requires its gate voltage \\(V_{out}\\) to move closer to \\(V_{DD}\\).\n- Therefore, \\(V_{out}\\) increases as \\(I_{in}\\) increases.\n\nThis circuit is thus a **current-to-voltage converter** rather than a conventional voltage amplifier.\n\n---\n\n## 3. Low-frequency small-signal conversion gain\n\nFor small changes around the operating point:\n\n- The fixed bias sources contribute no small-signal current.\n- Since \\(I_{D1}=I_1\\), the small-signal drain current of \\(M_1\\) is essentially zero.\n- Therefore \\(V_X\\) is essentially unchanged.\n- The change in input current must be absorbed by \\(M_2\\):\n\n\\[\n\\Delta i_{D2}=-\\Delta i_{in}.\n\\]\n\nFor the PMOS,\n\n\\[\n\\Delta i_{D2}=-g_{m2}\\Delta v_{out},\n\\]\n\nwhere\n\n\\[\ng_{m2}=\\beta_2\\left(V_{DD}-V_{out}-|V_{T2}|\\right)\n      =\\sqrt{2\\beta_2 I_{D2}}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\frac{\\Delta v_{out}}{\\Delta i_{in}}\n\\simeq \\frac{1}{g_{m2}}\n}\n\\qquad [\\mathrm{V/A}].\n\\]\n\nThe sign is positive: an increase in upward-injected \\(I_{in}\\) produces an increase in \\(V_{out}\\).\n\nIf channel-length modulation is included, neglecting body effect, the approximate low-frequency gain becomes\n\n\\[\n\\frac{d v_{out}}{d i_{in}}\n=\n\\left[\ng_{m2}+\n\\frac{g_{o2}g_{o1}}{g_{m1}+g_{o1}}\n\\right]^{-1}.\n\\]\n\n---\n\n## 4. Operating-region and headroom requirements\n\nFor \\(M_1\\) to remain saturated,\n\n\\[\n\\boxed{V_{out}\\ge V_b-V_{T1}}.\n\\]\n\nFor \\(M_2\\) to remain saturated,\n\n\\[\n\\boxed{V_{out}\\ge V_X+|V_{T2}|}.\n\\]\n\nFor \\(M_2\\) to be on,\n\n\\[\nV_{out}<V_{DD}-|V_{T2}|.\n\\]\n\nTherefore, the usable input range is approximately\n\n\\[\n0\\le I_{in}<I_Q-I_1.\n\\]\n\nAt the upper end, \\(M_2\\) approaches cutoff and the output approaches\n\n\\[\nV_{out,\\max}\\simeq V_{DD}-|V_{T2}|.\n\\]\n\nIf \\(M_2\\) enters the triode region, the square-law saturation expression above must be replaced by the triode equation. Real current sources also require sufficient voltage headroom for compliance.\n\n## Summary\n\nThe circuit is best understood as a monotonic current-to-voltage converter:\n\n\\[\n\\boxed{\nI_{in}\\uparrow\n\\;\\Rightarrow\\;\nI_{D2}\\downarrow\n\\;\\Rightarrow\\;\nV_{out}\\uparrow\n}\n\\]\n\nwith ideal low-frequency conversion gain\n\n\\[\n\\boxed{\\Delta V_{out}/\\Delta I_{in}=1/g_{m2}}.\n\\]\n\n\\(M_1\\) mainly establishes the internal-node bias, while \\(M_2\\) senses \\(V_{out}\\) and adjusts the current at \\(V_X\\). The value of the unlabeled sink current \\(I_Q\\) is essential for a complete numerical operating-point calculation.",
        "format": "markdown",
        "sha256": "23c4b411d00488809f990da8aba871d01a95e5dd6249ce51c83faac8ca67fc85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the NMOS/PMOS connections and gives the approximate positive transimpedance 1/gm2, but miscasts M1 as only a fixed-current bias device. It misses M1’s common-gate signal transfer and the feedback path that produces the very low input resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2549,
        "input_tokens": 2550,
        "output_tokens": 34943,
        "total_tokens": 37493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2549,
        "input_tokens": 2550,
        "output_tokens": 34943,
        "total_tokens": 37493,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33639,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Let \\(x\\) denote the common node joining the source of \\(M_1\\), the drain of \\(M_2\\), \\(I_{\\text{in}}\\), and the unlabeled downward current source.\n\n### Device identification\n\n- \\(M_1\\): NMOS  \n  - drain: \\(V_{\\text{out}}\\)  \n  - source: \\(x\\)  \n  - gate: \\(V_b\\)\n- \\(M_2\\): PMOS  \n  - source: \\(V_{DD}\\)  \n  - drain: \\(x\\)  \n  - gate: \\(V_{\\text{out}}\\)\n- \\(I_1\\): fixed current source from \\(V_{DD}\\) into \\(V_{\\text{out}}\\)\n- \\(I_{\\text{in}}\\): input current injected into \\(x\\)\n- Denote the unlabeled downward current source by \\(I_B\\).\n\nThus the circuit is a feedback current-to-voltage stage rather than an ordinary CMOS inverter.\n\n## DC analysis\n\nApplying KCL at \\(V_{\\text{out}}\\), noting that the PMOS gate draws no current,\n\n\\[\nI_{D1}=I_1.\n\\]\n\nTherefore, the current through \\(M_1\\) is fixed by \\(I_1\\). KCL at node \\(x\\) gives\n\n\\[\nI_{D2}+I_{\\text{in}}=I_{D1}+I_B,\n\\]\n\nso\n\n\\[\n\\boxed{I_{D2}=I_1+I_B-I_{\\text{in}}.}\n\\]\n\nThis is the main operating-point relation.\n\nIf \\(M_1\\) is saturated and channel-length modulation is neglected, define\n\n\\[\nK_n=\\frac12\\mu_n C_{\\text{ox}}\\left(\\frac WL\\right)_1.\n\\]\n\nThen\n\n\\[\nI_1=K_n\\left(V_b-V_x-V_{TN1}\\right)^2,\n\\]\n\ngiving\n\n\\[\n\\boxed{\nV_x=V_b-V_{TN1}-\\sqrt{\\frac{I_1}{K_n}}\n}.\n\\]\n\nThus, while \\(M_1\\) remains saturated, the input-node voltage is nearly fixed by \\(V_b\\) and \\(I_1\\).\n\nFor saturated \\(M_2\\), with\n\n\\[\nK_p=\\frac12\\mu_p C_{\\text{ox}}\\left(\\frac WL\\right)_2,\n\\]\n\n\\[\nI_{D2}=K_p\\left(V_{DD}-V_{\\text{out}}-|V_{TP2}|\\right)^2.\n\\]\n\nConsequently,\n\n\\[\n\\boxed{\nV_{\\text{out}}\n=\nV_{DD}-|V_{TP2}|\n-\\sqrt{\\frac{I_1+I_B-I_{\\text{in}}}{K_p}}\n}.\n\\]\n\nHence, with \\(I_{\\text{in}}\\) positive in the upward direction shown,\n\n\\[\n\\boxed{\\frac{dV_{\\text{out}}}{dI_{\\text{in}}}>0.}\n\\]\n\nIncreasing \\(I_{\\text{in}}\\) requires the PMOS current to decrease; a PMOS weakens when its gate voltage increases, so \\(V_{\\text{out}}\\) must rise.\n\n## Small-signal behavior\n\nSince ideal \\(I_1\\) has infinite small-signal resistance,\n\n\\[\n\\Delta I_{D1}\\approx 0.\n\\]\n\nWith \\(M_1\\) saturated, this forces the small-signal movement of \\(x\\) to be very small. At node \\(x\\),\n\n\\[\n\\Delta I_{D2}+\\Delta I_{\\text{in}}\\approx 0.\n\\]\n\nFor \\(M_2\\),\n\n\\[\n\\Delta I_{D2}\\approx-g_{m2}\\Delta V_{\\text{out}},\n\\]\n\nwhere\n\n\\[\ng_{m2}\n=\n2K_p\\left(V_{DD}-V_{\\text{out}}-|V_{TP2}|\\right)\n=\n\\frac{2I_{D2}}{V_{OV2}}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\n\\Delta V_{\\text{out}}\n\\approx\n\\frac{\\Delta I_{\\text{in}}}{g_{m2}}\n}.\n\\]\n\nIncluding finite output conductances, the common node is not perfectly fixed:\n\n\\[\nv_x \\approx\n\\frac{g_{o1}}{g_{m1}+g_{o1}}\\,v_{\\text{out}},\n\\]\n\nand the conversion gain becomes approximately\n\n\\[\n\\frac{v_{\\text{out}}}{i_{\\text{in}}}\n\\approx\n\\frac{1}{\ng_{m2}\n+\ng_{o2}\\dfrac{g_{o1}}{g_{m1}+g_{o1}}\n}.\n\\]\n\n## Feedback action\n\nThe feedback is negative:\n\n- If \\(V_{\\text{out}}\\) rises, \\(V_{SG2}=V_{DD}-V_{\\text{out}}\\) decreases.\n- \\(M_2\\) supplies less current to \\(x\\).\n- The \\(M_1\\) current tends to increase, pulling \\(V_{\\text{out}}\\) back down.\n\nThe circuit therefore acts as a regulated current-to-voltage converter, with positive conversion from input current to output voltage.\n\n## Required operating range\n\nFor correct operation:\n\n1. \\(M_1\\) must remain on and saturated:\n   \\[\n   V_{\\text{out}}\\ge V_b-V_{TN1}.\n   \\]\n\n2. \\(M_2\\) must remain on and saturated:\n   \\[\n   V_{\\text{out}}<V_{DD}-|V_{TP2}|,\n   \\qquad\n   V_x\\le V_{\\text{out}}+|V_{TP2}|.\n   \\]\n\n3. The required PMOS current must be nonnegative:\n   \\[\n   I_1+I_B-I_{\\text{in}}\\ge 0.\n   \\]\n\n4. \\(I_{D2}\\) must remain below the maximum current the PMOS can supply.\n\nIf these conditions are violated, the output saturates and the approximately linear input-current-to-output-voltage relation no longer holds. Numerical bias values cannot be found without \\(V_{DD}\\), \\(V_b\\), device sizes, thresholds, and the value of the unlabeled current source.",
        "format": "markdown",
        "sha256": "f9f960ec8613dfafd44faae65f7c86b10825a9f7e6d60437952a0748b4d1d3b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout, traces feedback to node x, and derives the key transimpedance vout/iin ≈ 1/gm2 with a low input-node movement. Minor DC bias-current details do not change the essential result.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2549,
        "input_tokens": 2550,
        "output_tokens": 24032,
        "total_tokens": 26582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2549,
        "input_tokens": 2550,
        "output_tokens": 24032,
        "total_tokens": 26582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "No—**not for any finite capacitance**, assuming the inverters have sufficient drive and the oscillator starts through noise or mismatch.\n\nThis is a three-stage ring oscillator. Each inverter has a load-dependent propagation delay. A complete oscillation period is approximately\n\n\\[\nT \\approx 2\\left(t_{pd1}+t_{pd2}+t_{pd3}\\right),\n\\qquad\nf_{\\rm osc}\\approx \\frac{1}{2\\sum_i t_{pd,i}} .\n\\]\n\nFor a real CMOS inverter,\n\n\\[\nt_{pd,i}\\approx t_{0,i}+R_{\\text{out},i}C_{L,i},\n\\]\n\nso increasing the capacitances makes the oscillation progressively slower, typically with \\(f_{\\rm osc}\\propto 1/C_L\\). It does not inherently stop for finite \\(C_L\\).\n\nOnly in the singular limit \\(C_L\\to\\infty\\) would there be no finite-period oscillation: a finite output current cannot change the voltage of an infinite capacitor in finite time. In practice, extremely large capacitors can cause inadequate logic swing, metastability, or make the oscillation too slow for a simulator’s observation interval, making the circuit appear not to oscillate.",
        "format": "markdown",
        "sha256": "64fece18ff51e96143c46848a57481197b226657c1b8a983956dbb9e31dc8b38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that for any finite equal capacitances the ring continues oscillating at a lower frequency, supported by the valid load-dependent delay argument. The infinite-capacitance limit is a reasonable boundary caveat.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2382,
        "output_tokens": 9286,
        "total_tokens": 11668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9049,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 2382,
        "output_tokens": 9286,
        "total_tokens": 11668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9049,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "For any **finite** capacitance, no—the circuit still oscillates. The three inverters provide the correct odd number of inversions for a ring oscillator. The capacitors merely increase the output transition and propagation delays.\n\nFor example, with inverter output resistance \\(R_o\\), an output approximately follows\n\n\\[\nC_L\\frac{dv_o}{dt}=\\frac{V_{\\text{drive}}-v_o}{R_o},\n\\]\n\nso the output crosses the next inverter’s threshold after a finite delay. Roughly,\n\n\\[\nT \\approx 3(t_{PHL}+t_{PLH}), \\qquad t_{PD}\\propto C_L,\n\\]\n\nand therefore \\(f\\) decreases approximately as \\(1/C_L\\).\n\nThus:\n\n- **Very large but finite \\(C_L\\):** oscillation continues, but at an extremely low frequency.\n- **The formal limit \\(C_L\\to\\infty\\):** the period becomes infinite, so the circuit appears static rather than oscillating.\n\nIn practice, very large capacitors can still cause problems through supply droop, leakage, startup instability, or outputs failing to reach valid logic thresholds, but capacitance alone does not stop a finite ring oscillator.",
        "format": "markdown",
        "sha256": "f6fa75ffc85ad3c62f07d6cf2a69461ea07781abcbc7feb390e776de871a42b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that for any finite, equally scaled capacitance the ring continues oscillating at a lower frequency, supported by the increased-delay argument. The infinite-capacitance limit is a reasonable mathematical caveat and does not undermine the answer for arbitrarily large finite capacitors.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2382,
        "output_tokens": 10981,
        "total_tokens": 13363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10750,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2382,
        "output_tokens": 10981,
        "total_tokens": 13363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10750,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "No—not for any **finite** capacitance.\n\nThe circuit is a three-inverter ring oscillator. Each load capacitor, together with the inverter’s output resistance, sets its propagation delay:\n\n\\[\nt_{pd,i}\\approx R_{\\text{out},i}C_i .\n\\]\n\nA simple delay model gives\n\n\\[\nT \\approx 2\\left(t_{pd,1}+t_{pd,2}+t_{pd,3}\\right),\n\\qquad\nf_{\\text{osc}}\\approx \\frac{1}{2\\left(t_{pd,1}+t_{pd,2}+t_{pd,3}\\right)}.\n\\]\n\nThus, for identical capacitors and inverters, \\(f_{\\text{osc}}\\propto 1/C_L\\). Making the capacitors very large makes the oscillator very slow, but it still oscillates.\n\nIn the strict mathematical limit \\(C_L\\to\\infty\\), the period tends to infinity and the outputs effectively stop changing, so there is no finite-frequency oscillation in that limiting case. In practice, leakage, supply droop, and other very-low-frequency effects may prevent reliable oscillation before that ideal limit is reached.",
        "format": "markdown",
        "sha256": "121d56068b7fd820220b12f6837dee3295e13efa06c3599293adc6b09df8b1e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that arbitrarily large finite capacitors increase stage delay and lower the oscillation frequency without stopping oscillation. The exact infinite-capacitance limit caveat does not change the answer for arbitrarily large finite loads.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2382,
        "output_tokens": 7883,
        "total_tokens": 10265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2382,
        "output_tokens": 7883,
        "total_tokens": 10265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7658,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "This is a three-stage ring oscillator. Assuming the load capacitance dominates each inverter’s delay,\n\n\\[\nf_{\\text{osc}}\\approx \\frac{1}{2N\\tau_d},\\qquad \\tau_d\\propto C_L,\n\\]\n\nso doubling all three capacitors makes the oscillation frequency approximately **half its original value**.\n\nUsing the standard white-phase-noise model for a ring oscillator,\n\n\\[\nS_\\phi(\\Delta f)\\propto C_L\\left(\\frac{f_{\\text{osc}}}{\\Delta f}\\right)^2,\n\\]\n\nthe scaling is\n\n\\[\n\\frac{S_\\phi'}{S_\\phi}\n=2\\left(\\frac{1}{2}\\right)^2\n=\\frac{1}{2}.\n\\]\n\nThus, at a **fixed offset frequency in Hz**, the phase-noise density typically improves by about **3 dB** (becomes half), while the carrier frequency is halved.\n\nThe exact result depends on bias current, device noise, and the offset region; for example, ideal flicker-noise-limited phase noise can improve by about 9 dB.",
        "format": "markdown",
        "sha256": "5d0c84833b8d705704b112ddd3e6f324653da81958c0ca5e7d32bfa1cf65e749"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly predicts that doubling the capacitors roughly halves the oscillation frequency, but incorrectly adds a factor of load capacitance to the white-noise phase-noise scaling. The resulting 3 dB improvement is wrong; at a fixed offset frequency, the expected improvement is about 6 dB.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2380,
        "output_tokens": 14422,
        "total_tokens": 16802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2380,
        "output_tokens": 14422,
        "total_tokens": 16802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "This is a three-stage CMOS ring oscillator. Assuming the inverter sizing, supply, and drive current remain unchanged,\n\n\\[\nt_d \\propto C_L,\\qquad \nf_{\\text{osc}}\\approx \\frac{1}{6t_d}.\n\\]\n\nThus, doubling all three capacitors gives\n\n\\[\nf'_{\\text{osc}}\\approx \\frac{f_{\\text{osc}}}{2}.\n\\]\n\nFor the usual first-order CMOS ring-oscillator phase-noise model,\n\n\\[\n\\mathcal L(\\Delta f)\\propto C_L^2\n\\left(\\frac{f_{\\text{osc}}}{\\Delta f}\\right)^2 .\n\\]\n\nAt the same absolute offset frequency \\(\\Delta f\\),\n\n\\[\n\\frac{\\mathcal L'}{\\mathcal L}\n=2^2\\left(\\frac12\\right)^2=1.\n\\]\n\n**Therefore, the phase-noise density remains approximately unchanged (0 dB change), while the oscillation frequency is halved.**\n\nIf compared at the same fractional offset, \\(\\Delta f/f_{\\text{osc}}\\), the result would be about 6 dB worse. Actual results can differ if flicker noise, bias current, device size, or oscillator \\(Q\\) also changes.",
        "format": "markdown",
        "sha256": "a9b534e9b4188d22debe6671809dacb08e94c1059b7a50c1368deccfa18d7967"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly predicts that doubling the capacitors roughly halves the oscillation frequency, but its central phase-noise conclusion is wrong: at a fixed absolute offset the noise falls by about 6 dB, not remains unchanged. Its fixed-relative-offset claim is also reversed.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2379,
        "input_tokens": 2380,
        "output_tokens": 24172,
        "total_tokens": 26552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2379,
        "input_tokens": 2380,
        "output_tokens": 24172,
        "total_tokens": 26552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming the capacitors dominate each inverter’s delay,\n\n\\[\nf_0 \\approx \\frac{1}{2N\\tau_d},\\qquad \\tau_d\\propto C_L .\n\\]\n\nDoubling all three capacitors therefore approximately halves the oscillation frequency.\n\nUnder the standard Leeson white-noise model for a ring oscillator,\n\n\\[\n\\mathcal L(\\Delta f)\\propto \\left(\\frac{f_0}{\\Delta f}\\right)^2 ,\n\\]\n\nso at the same offset frequency the phase-noise power decreases by a factor of four:\n\n\\[\n\\boxed{\\mathcal L' \\approx \\frac{\\mathcal L}{4}}\n\\]\n\nor about **6 dB lower (improved)**. The exact result can differ if \\(1/f\\) flicker noise dominates or the inverter bias/noise parameters change; the model-independent result is that the oscillation frequency is halved.",
        "format": "markdown",
        "sha256": "d26e54596e84103bcdb60032a055362777852b34167e879aa40fa1b433aec55a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors approximately halves the oscillation frequency and reduces white-noise phase noise by a factor of four (about 6 dB) at a fixed offset frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2379,
        "input_tokens": 2380,
        "output_tokens": 32624,
        "total_tokens": 35004,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2379,
        "input_tokens": 2380,
        "output_tokens": 32624,
        "total_tokens": 35004,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "No—not for any **finite** \\(C_L\\), assuming the inverters can source/sink current and the circuit starts from noise or mismatch.\n\nThis is a three-inverter ring oscillator. The first inverter’s finite output resistance \\(R_{\\text{out}}\\) charges and discharges \\(C_L\\), giving a time constant\n\n\\[\n\\tau \\approx R_{\\text{out}}C_L .\n\\]\n\nAs the capacitor voltage crosses the second inverter’s threshold, inverter 2 and then inverter 3 change the first inverter’s input, reversing the capacitor’s charging direction. Thus the oscillation continues, but more slowly. A simplified frequency estimate is\n\n\\[\nf_{\\text{osc}}\\approx\n\\frac{1}{2\\left[t_{1}(C_L)+t_2+t_3\\right]},\n\\]\n\nwhere \\(t_1(C_L)\\) is the first stage’s load-dependent delay and often grows approximately in proportion to \\(C_L\\).\n\nTherefore:\n\n- **Large finite \\(C_L\\):** oscillation persists, usually at a lower frequency.\n- **\\(C_L\\to\\infty\\):** the capacitor cannot change voltage in a finite time with finite drive current, so the frequency approaches zero and the circuit is effectively static.\n- In practice, gate-drive limits, excessive capacitive loading, noise margin, and startup reliability may cause problems before the mathematical infinite-\\(C_L\\) limit.",
        "format": "markdown",
        "sha256": "5dd44dad50669d8cf369637c9dfb7cffc9f147551d54a4331a60efb25f6cfe19"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gets the central conclusion backward: it says oscillation persists for every finite CL, whereas sufficiently large finite loading can create a dominant pole and prevent the loop from satisfying the Barkhausen condition. It recognizes that loading slows the node, but treats the effect as delay alone and misses the failure mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2309,
        "output_tokens": 12960,
        "total_tokens": 15269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2309,
        "output_tokens": 12960,
        "total_tokens": 15269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12682,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "For any **finite** \\(C_L\\), the circuit should still oscillate, assuming the first inverter can source and sink the capacitor’s charge.\n\nA larger \\(C_L\\) increases the first inverter’s transition time approximately as\n\n\\[\nt_{CL}\\approx R_{\\text{out}}C_L,\n\\]\n\nso the ring-oscillator frequency becomes approximately\n\n\\[\nf \\approx \\frac{1}{2\\left(t_{CL}+t_{pd2}+t_{pd3}\\right)}.\n\\]\n\nThus, as \\(C_L\\to\\infty\\), the oscillation frequency approaches zero—the circuit becomes arbitrarily slow, but it does not stop oscillating for every finite \\(C_L\\).\n\nIn a real circuit, an excessively large load can eventually prevent the first inverter from reaching the switching threshold within a practical time, making the oscillator appear not to run. That failure is due to finite drive strength and parasitics, not simply the presence of a large finite capacitor. A literally infinite capacitor could not undergo a voltage transition and therefore would not oscillate.",
        "format": "markdown",
        "sha256": "d36953580b7584662ccf448b3d37346a7324d64f7696764d24b9a4d4800307d3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: a sufficiently large load on one node can make the oscillator fail, not merely slow toward zero frequency. It discusses loading but misses the dominant-pole and loop-gain/phase failure mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2309,
        "output_tokens": 1208,
        "total_tokens": 3517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2309,
        "output_tokens": 1208,
        "total_tokens": 3517,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Not for any **finite** \\(C_L\\), assuming the inverters have finite propagation delay and adequate output drive.\n\nThis is a three-inverter ring oscillator. The odd number of inverters provides the required net inversion, while \\(C_L\\) loads the output of the first inverter and lengthens its rise and fall times. Approximately,\n\n\\[\nT \\approx T_{\\text{gates}}+\nC_L\\Delta V\\left(\\frac{1}{I_{\\text{up}}}+\\frac{1}{I_{\\text{down}}}\\right),\n\\]\n\nso the period increases roughly in proportion to \\(C_L\\), and the frequency approaches zero as \\(C_L\\) becomes very large. Every finite capacitor will eventually charge and discharge, so the circuit still oscillates, although possibly with an extremely long period.\n\nOnly in the mathematical limit \\(C_L=\\infty\\), where the node cannot change voltage in finite time, would oscillation cease. In practice, leakage, drive-current limits, or required logic-level and slew-rate specifications can also make an excessively large capacitor appear nonfunctional.",
        "format": "markdown",
        "sha256": "238b9bf8a59b6e858b51dcefb1baa91810cdedca183451e82192c535c14194b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: a sufficiently large load on one node can prevent oscillation even for finite capacitance by creating a dominant pole and violating the loop’s Barkhausen condition. It correctly notes that the load slows the node, but incorrectly assumes every finite load must still oscillate.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2309,
        "output_tokens": 5082,
        "total_tokens": 7391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2309,
        "output_tokens": 5082,
        "total_tokens": 7391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths generally **improves the phase noise by about 3 dB**, assuming all device/parasitic capacitances scale with the widths and the comparison is at the same offset relative to the oscillation frequency.\n\n- \\(g_m\\) and transistor current double.\n- The device and interstage capacitances also roughly double, so the delay \\(t_d\\propto C_L/g_m\\)—and therefore \\(f_{\\text{osc}}\\)—remains approximately unchanged.\n- The resulting device-noise voltage at each node is approximately halved.\n- With the signal swing unchanged, the phase-noise spectrum scales accordingly:\n\n\\[\nS_\\phi(2W)\\approx \\frac{1}{2}S_\\phi(W)\n\\]\n\nThus,\n\n\\[\n\\Delta L \\approx 10\\log_{10}\\!\\left(\\frac12\\right)=-3.0\\ \\text{dB}.\n\\]\n\nThe trade-off is approximately doubled supply power. If a large fixed external capacitance dominates, the oscillation frequency changes, and phase noise at a fixed absolute offset must then be recalculated.",
        "format": "markdown",
        "sha256": "9a51f6e3359684570f16a84485882011f2efdcb2d1f83edc06623dc1e81f68ca"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives an approximately 3 dB phase-noise reduction and a valid scaling explanation: device capacitance and drive scale together, keeping frequency roughly constant while increased capacitance reduces node noise. The power trade-off is also noted.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3396,
        "output_tokens": 17145,
        "total_tokens": 20541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3396,
        "output_tokens": 17145,
        "total_tokens": 20541,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming the widths of **all** NMOS and PMOS devices are doubled and the dominant noise is thermal white noise, the **phase-noise level remains approximately unchanged**.\n\nDoubling the widths:\n\n- Doubles \\(g_m\\) and the stage drive current \\(I_D\\).\n- Approximately doubles the transistor/gate parasitic capacitance \\(C\\).\n- Leaves the oscillation frequency approximately unchanged, since \\(t_d \\propto C/I_D\\).\n\nA common ring-oscillator phase-noise expression contains the ratio \\(C/I_D\\), so\n\n\\[\n\\frac{C'}{I_D'}=\\frac{2C}{2I_D}=\\frac{C}{I_D},\n\\]\n\nand the white phase-noise floor does not change.\n\nThe tradeoffs are approximately **2× device area and 2× current/power**. Close-in, \\(1/f\\)-noise-dominated phase noise may improve because input-referred flicker noise decreases with larger \\(W\\), potentially by about 3 dB for a 2× width increase.",
        "format": "markdown",
        "sha256": "4f0ce38954fda74f42e05a3ffaae6c75221662bb221411e814f4b83a43101b78"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that current and node capacitance roughly double, but concludes the phase noise is unchanged. The expected result is about a 3 dB reduction; the C/I_D argument misses the improved noise-to-signal ratio.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3200,
        "input_tokens": 3396,
        "output_tokens": 14631,
        "total_tokens": 18027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3200,
        "input_tokens": 3396,
        "output_tokens": 14631,
        "total_tokens": 18027,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14430,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Doubling both NMOS and PMOS widths generally **improves (lowers) the phase noise**.\n\nWith channel length, supply voltage, and overdrive unchanged:\n\n- \\(g_m\\) and device current approximately double.\n- Flicker-noise voltage density decreases because  \n  \\[\n  S_{v_g,1/f}\\propto \\frac{1}{WL}.\n  \\]\n- A CMOS ring oscillator’s white-noise phase-noise term is approximately proportional to \\(1/I_D\\) (roughly \\(1/W\\)).\n\nThus, if the oscillation frequency remains approximately unchanged,\n\n\\[\nL_{\\text{new}}\\approx \\frac{1}{2}L_{\\text{old}},\n\\]\n\nso the phase-noise density improves by about **3 dB**, and integrated phase jitter decreases by approximately \\(\\sqrt{2}\\).\n\nThe trade-off is increased parasitic capacitance and drive current. If bias current or load capacitance is constrained, the oscillation frequency changes and the exact phase-noise scaling may differ.",
        "format": "markdown",
        "sha256": "49e001f560210923a64a808324a96fa6342338798efea0d5e9bffe81bfd67167"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the required approximately 3 dB phase-noise reduction. Its current-scaling explanation is consistent with the result; the extra caveats do not change the answer for the stated circuit.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3200,
        "input_tokens": 3396,
        "output_tokens": 19141,
        "total_tokens": 22537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3200,
        "input_tokens": 3396,
        "output_tokens": 19141,
        "total_tokens": 22537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "A numerical value cannot be obtained from the functional schematic alone; the inverter model and operating point are required. For the usual **low-frequency small-signal model of three matched CMOS inverters**, the result can be derived as follows.\n\nAt the symmetric dc bias, a supply perturbation is a common-mode perturbation, so the input and output nodes of each stage move together to a voltage \\(v_x\\). Let\n\n\\[\nG_P=g_{mP}+g_{oP},\\qquad G_N=g_{mN}+g_{oN},\n\\]\n\nwhere \\(g_o=1/r_o\\) is the transistor output conductance.\n\nFor one inverter,\n\n\\[\ni_P=G_P(v_{DD}-v_x),\\qquad i_N=G_Nv_x.\n\\]\n\nOutput-node KCL gives\n\n\\[\nG_P(v_{DD}-v_x)=G_Nv_x\n\\quad\\Rightarrow\\quad\nv_x=\\frac{G_P}{G_P+G_N}v_{DD}.\n\\]\n\nThus the incremental supply current of one stage is\n\n\\[\ni_{DD,\\text{stage}}\n=G_P(v_{DD}-v_x)\n=\\frac{G_PG_N}{G_P+G_N}v_{DD}.\n\\]\n\nThe three stages are in parallel at the supply node, hence\n\n\\[\n\\boxed{\nR_X=\n\\frac{1}{3}\n\\left(\n\\frac{1}{g_{mP}+g_{oP}}\n+\n\\frac{1}{g_{mN}+g_{oN}}\n\\right)\n}\n\\]\n\nIf channel-length modulation is neglected, \\(g_o\\ll g_m\\), this becomes\n\n\\[\n\\boxed{\nR_X \\simeq \\frac{1}{3}\n\\left(\\frac{1}{g_{mP}}+\\frac{1}{g_{mN}}\\right)\n}\n\\]\n\nand for matched devices, \\(g_{mP}=g_{mN}=g_m\\),\n\n\\[\n\\boxed{R_X\\simeq \\frac{2}{3g_m}}\n\\]\n\nwith \\(g_m\\) evaluated at the switching-threshold bias.\n\nThis is the quasi-static small-signal resistance. The actual supply impedance at the oscillator’s running frequency is frequency-dependent and requires a periodic small-signal or harmonic-balance analysis. If the triangles are intended as ideal behavioral inverters with no specified power-pin current, then \\(R_X\\) is not determinable from the figure.",
        "format": "markdown",
        "sha256": "ea7adda08b82e9a5bd6f0d48156177d1ff7777a954fa9acf268372768a1459bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static gm-based derivation is internally consistent, but it ignores the oscillator’s charging and discharging of the load capacitances—the dominant mechanism that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 3464,
        "output_tokens": 27404,
        "total_tokens": 30868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 3464,
        "output_tokens": 27404,
        "total_tokens": 30868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26934,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The value is model-dependent; an ideal inverter symbol does not specify its supply-pin current. Using the usual CMOS small-signal model, the result can be obtained as follows.\n\nAssume three identical CMOS inverters, operation in saturation, body effect neglected, and \\(V_{SS}\\) at small-signal ground. Apply a test voltage \\(v_x\\) to the common VDD node. By symmetry, all ring nodes have the same incremental voltage \\(v\\).\n\nFor one inverter, with \\(g_m\\) denoting transconductance and \\(g_{ds}\\) output conductance,\n\n\\[\ni_p=g_{m,p}(v_x-v)+g_{ds,p}(v_x-v)\n\\]\n\nis the PMOS current supplied by VDD, while\n\n\\[\ni_n=g_{m,n}v+g_{ds,n}v\n\\]\n\nis the NMOS current. Equating them at the output gives\n\n\\[\nv=\\frac{g_{m,p}+g_{ds,p}}\n{g_{m,n}+g_{m,p}+g_{ds,n}+g_{ds,p}}\\,v_x.\n\\]\n\nThe total current entering the oscillator from the test source is\n\n\\[\ni_x=3(g_{m,p}+g_{ds,p})(v_x-v).\n\\]\n\nTherefore,\n\n\\[\n\\boxed{\nR_X=\\frac{v_x}{i_x}\n=\\frac{1}{3}\n\\left(\n\\frac{1}{g_{m,p}+g_{ds,p}}\n+\n\\frac{1}{g_{m,n}+g_{ds,n}}\n\\right)\n}\n\\]\n\nFor perfectly matched inverters,\n\n\\[\ng_{m,n}=g_{m,p}=g_m,\\qquad\ng_{ds,n}=g_{ds,p}=g_{ds},\n\\]\n\nso\n\n\\[\n\\boxed{R_X=\\frac{2}{3(g_m+g_{ds})}}\n\\]\n\nand if channel-length modulation is neglected,\n\n\\[\n\\boxed{R_X \\approx \\frac{2}{3g_m}}.\n\\]\n\nThis is the DC/common-mode small-signal resistance about the symmetric operating state. The impedance of a free-running oscillator at its oscillation frequency is generally complex and requires the transistor model and operating phase; it cannot be determined from the block diagram alone.",
        "format": "markdown",
        "sha256": "87c9939bc45c798b87867d428bf8574a51504292280176c8ed20c943a93cf4f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer analyzes only a static symmetric operating point and derives the gm-based resistance, missing the dominant oscillation-driven charging and discharging of the load capacitances that sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3463,
        "input_tokens": 3464,
        "output_tokens": 35329,
        "total_tokens": 38793,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3463,
        "input_tokens": 3464,
        "output_tokens": 35329,
        "total_tokens": 38793,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 34889,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "### Ideal small-signal/DC result\n\nWith the external supply source removed and a small test voltage \\(v_x\\) applied at the VDD node, an ideal CMOS inverter draws no dc current from its supply pin. The gates draw no current, and the static VDD-to-ground path is open except for leakage. The ring feedback is entirely in the output-to-input signal path and does not provide a dc path into VDD.\n\nThus\n\n\\[\ni_x=0,\\qquad\n\\boxed{R_X=\\frac{v_x}{i_x}\\rightarrow \\infty } .\n\\]\n\n### Real running oscillator\n\nThis is not an infinite impedance at the oscillation frequency. Switching current charges the output capacitances. For three equal stages, each with effective output capacitance \\(C_L\\),\n\n\\[\nI_{\\mathrm{DD,dyn}}\\approx 3C_L V_{\\mathrm{DD}} f_0 .\n\\]\n\nIf “small-signal resistance” means the incremental resistance of this **period-averaged** supply current, and \\(f_0\\) is approximately independent of \\(V_{\\mathrm{DD}}\\),\n\n\\[\n\\boxed{r_X \\approx \\frac{1}{3C_L f_0}} .\n\\]\n\nMore generally,\n\n\\[\nr_X=\n\\frac{1}{\n3C_L\\!\\left[f_0+V_{\\mathrm{DD}}\\frac{df_0}{dV_{\\mathrm{DD}}}\\right]} .\n\\]\n\nTherefore, the only value determined directly from the functional schematic is the ideal dc result \\(R_X=\\infty\\); a finite real supply impedance requires the load capacitance, transistor/parasitic models, and frequency.",
        "format": "markdown",
        "sha256": "e946a6d76935940a87ebe5b392daaf83951fd34431b7f0cdd2f3b152651a1e62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies oscillation-driven charging of the three load capacitances and gives the expected period-averaged resistance, with a valid refinement for frequency dependence. The initial ideal-DC observation does not undermine the correct running-oscillator result.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3463,
        "input_tokens": 3464,
        "output_tokens": 22583,
        "total_tokens": 26047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3463,
        "input_tokens": 3464,
        "output_tokens": 22583,
        "total_tokens": 26047,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Not as a single scalar value. The quoted expression is best interpreted as a **DC small-signal resistance around the balanced analog operating point**, under restrictive assumptions. It is not generally the impedance seen by a supply ripple while the ring is running.\n\nAt the balanced point, all three nodes are approximately at the switching threshold. Neglecting transistor output resistances and capacitances, let \\(v_s\\) be a small supply perturbation and \\(v\\) the resulting node perturbation. For each stage,\n\n\\[\n(g_{mn}+g_{mp})v=g_{mp}v_s\n\\]\n\nand the small-signal current drawn through the PMOS is\n\n\\[\ni_s=g_{mp}(v_s-v)\n   =\\frac{g_{mn}g_{mp}}{g_{mn}+g_{mp}}v_s .\n\\]\n\nSince the three stages draw supply current in parallel,\n\n\\[\nR_{X,\\mathrm{DC}}\n \\approx \\frac{1}{3}\n \\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).\n\\]\n\nThus the numerical expression can be obtained at the metastable/balanced DC point. Strictly speaking, however, the inverter devices are **not** diode-connected—the gate and drain of each inverter are different nodes.\n\n### When the ring is actually oscillating\n\nThe circuit is a nonlinear periodic system:\n\n- The stages have different phases.\n- \\(g_{mn}\\) and \\(g_{mp}\\) vary over the cycle and differ from stage to stage.\n- Output and parasitic capacitances carry substantial displacement current.\n- The supply current contains a DC component plus harmonics.\n\nConsequently, one must first define what \\(R_X\\) means:\n\n1. **DC/average supply sensitivity**\n   \\[\n   R_{\\mathrm{DC}}\n   =\\left(\\frac{d\\overline I_{DD}}{dV_{DD}}\\right)^{-1}\n   \\]\n   evaluated along the periodic steady-state solution.\n\n2. **Supply impedance at the oscillation frequency**\n   \\[\n   Z_{DD}(j\\omega_0)\n   =\\frac{\\widehat V_{DD}(j\\omega_0)}\n          {\\widehat I_{DD}(j\\omega_0)},\n   \\]\n   which is generally complex and frequency-dependent.\n\nNeither is automatically equal to the quoted formula. They normally require a periodic small-signal analysis, harmonic balance, or a transient PSS simulation.\n\nA crude full-swing charging model gives\n\n\\[\n\\overline I_{DD}\\approx 3C_LV_{DD}f_o,\n\\]\n\nso an “effective DC resistance” \\(V_{DD}/\\overline I_{DD}\\) can happen to resemble the quoted expression when the same constant-\\(g_m\\) delay model is used. That is only an average charge-transfer estimate, not the AC supply impedance at \\(f_o\\).\n\n**Bottom line:** If \\(R_X\\) refers to the low-frequency incremental resistance around the balanced/startup operating point, the expression remains a reasonable approximation. If it refers to the actual supply port of the free-running oscillator, the answer generally changes and must be calculated for the specified frequency and operating waveform.",
        "format": "markdown",
        "sha256": "b6b441c65c0345e4b6c324a4e449c069465fe59dbcb3f6085db4d7e81785add8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging and estimates the average current as approximately 3CLVDDf₀. However, it does not establish the key conclusion that the effective RX remains on the order of the static inverse-gm/on-resistance estimate; its bottom line instead says the running-oscillator answer generally changes.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3471,
        "output_tokens": 17837,
        "total_tokens": 21308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17218,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3471,
        "output_tokens": 17837,
        "total_tokens": 21308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17218,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Not if \\(R_X\\) is intended to be the impedance of the **running oscillator**. The quoted expression is a **quiescent/DC** result.\n\nAt the metastable dc operating point of the ring,\n\n\\[\nv_1=v_2=v_3=V_X,\n\\]\n\nso for each inverter the gate and drain voltages are equal. Both MOSFETs are then diode-connected, giving approximately\n\n\\[\nR_{X,\\text{dc}}\n\\approx \\frac{1}{3}\n\\left[\n\\frac{1}{g_{mn}+g_{o,n}}\n+\n\\frac{1}{g_{mp}+g_{o,p}}\n\\right],\n\\]\n\nwhich reduces to the stated expression when output conductances \\(g_o\\) are neglected.\n\nDuring oscillation, however:\n\n- each inverter's input and output are generally different, so the transistors are **not** diode-connected;\n- \\(g_m\\), current, and resistance vary over the cycle;\n- the supply current contains a DC component plus harmonics and is largely associated with charging and discharging the stage capacitances.\n\nThus, for the oscillating circuit there is no single resistance given by\n\n\\[\n\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right).\n\\]\n\nOne must instead specify what is wanted:\n\n- **Average DC resistance:** \\(R_{\\text{DC}}\\approx V_{DD}/I_{\\text{avg}}\\).\n- **Incremental average resistance:** \\(\\left(dI_{\\text{avg}}/dV_{DD}\\right)^{-1}\\).\n- **Impedance at the oscillation frequency or a harmonic:** a generally complex \\(Z_S(\\omega)\\), found using a full transistor model and periodic small-signal/harmonic-balance analysis, including node and supply capacitances.\n\nSo the formula remains valid for the frozen quiescent small-signal circuit, but it is not the supply impedance of the free-running oscillator.",
        "format": "markdown",
        "sha256": "fb028eefef73d17538552eff15ede4ee7093f924a45cf2932390b60a5045e66c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillating supply current is largely associated with charging and discharging capacitances, but does not derive the capacitive average-resistance result or establish that RX remains on the order of the MOS on-resistance. Thus it misses the central magnitude conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3471,
        "output_tokens": 10974,
        "total_tokens": 14445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10596,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3471,
        "output_tokens": 10974,
        "total_tokens": 14445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10596,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "There are two separate issues:\n\n1. **Oscillation does not by itself change a correctly computed small-signal derivative.**\n2. **The quoted formula uses a diode-connected model that is not valid for the running ring oscillator.**\n\nA MOSFET is diode-connected only when its **gate and drain are physically shorted**, so that small-signal variations satisfy \\(\\delta v_g=\\delta v_d\\). In stage \\(k\\) of this ring,\n\n\\[\nv_{in,k}=v_{out,k-1}, \\qquad v_{drain,k}=v_{out,k},\n\\]\n\nso neither transistor is diode-connected. Even at the formal symmetric DC bias, where all node voltages may be equal, equality of DC voltages does not imply equality of their small-signal variations.\n\nFor example, ignoring capacitive currents, the PMOS supply current in stage \\(k\\) is approximately\n\n\\[\ni_{DD,k}\n=\ng_{mp,k}(v_X-v_{in,k})\n+\ng_{ds,p,k}(v_X-v_{out,k}).\n\\]\n\nThus the supply current depends on both the input and output of every stage. Those internal node variations are determined by the closed ring and by the oscillation frequency and phase; they cannot be replaced by two fixed \\(1/g_m\\) resistors.\n\nThe expression\n\n\\[\nR_X=\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right)\n\\]\n\nwould apply to three **independent diode-connected-pair branches in parallel**. It can be viewed as a rough frozen-state or opened-loop estimate under additional assumptions, but it is not generally the impedance presented by the running oscillator. In a real inverter, one transistor may even be off at a given phase, and the three stages of a symmetric ring operate at different phases.\n\nFor an oscillator in periodic steady state, the meaningful supply quantity is normally a complex impedance,\n\n\\[\nZ_X(j\\omega)=\\frac{V_X(j\\omega)}{I_{DD}(j\\omega)},\n\\]\n\nor, for a slowly varying supply,\n\n\\[\nR_{X,\\mathrm{avg}}\n=\n\\left(\n\\frac{d\\overline I_{DD}}{dV_{DD}}\n\\right)^{-1}.\n\\]\n\nThese require the complete small-signal model, including the ring feedback, transistor output conductances, bias-dependent \\(g_m\\), body effect, and parasitic/load capacitances. Periodic small-signal or harmonic-balance analysis is normally used.\n\nSo: **there is no special “oscillation correction” to the quoted formula. Rather, the formula is generally not applicable to the actual oscillating topology.**",
        "format": "markdown",
        "sha256": "624b9655f3233335b495de7eec923a2a9658b8fb617023e1775dc3401dcaf1c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that the running ring is not a set of diode-connected pairs, but it omits the dominant capacitive charging/discharging mechanism and does not establish that RX remains on the order of the MOS on-resistance. It stops at saying the formula is inapplicable and periodic analysis is needed.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3471,
        "output_tokens": 20923,
        "total_tokens": 24394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3471,
        "output_tokens": 20923,
        "total_tokens": 24394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20415,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**The initial differential voltage gain decreases as \\(W_7\\) increases.**\n\nA wider \\(M_7\\) increases the tail current \\(I_{D7}\\). The input-pair transconductance increases approximately as\n\n\\[\ng_{m1}\\propto \\sqrt{I_{D7}},\n\\]\n\nbut the output conductances of the conducting transistors increase roughly in proportion to \\(I_{D7}\\). Since the initial gain has the form\n\n\\[\nA_{v0}\\sim \\frac{g_{m1}}{g_{o,\\mathrm{eff}}},\n\\]\n\nit scales approximately as\n\n\\[\nA_{v0}\\propto \\frac{1}{\\sqrt{I_{D7}}}\n          \\propto \\frac{1}{\\sqrt{W_7}}.\n\\]\n\nThus, enlarging \\(M_7\\) improves evaluation speed and reduces delay, but lowers the initial gain because finite output resistance becomes more important.",
        "format": "markdown",
        "sha256": "8d0b46f8b4b95f7476eb3776580439dc6ebdef608aa5a1c629120862502b6d28"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The decreasing trend is correct, and the answer correctly notes that a wider M7 raises tail current while input-pair gm grows sublinearly. However, it attributes the change to a static gm/go gain and output resistance; the relevant initial gain is an integration gain that scales roughly with gm/ICM. This is a significant modeling flaw, so it does not earn full credit.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3611,
        "output_tokens": 25907,
        "total_tokens": 29518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3611,
        "output_tokens": 25907,
        "total_tokens": 29518,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Increasing \\(W_7\\) does **not appreciably increase the initial differential gain**; it remains approximately constant.\n\nAt the metastable operating point, neglecting channel-length modulation,\n\n\\[\nA_{v0}\\equiv \\frac{v_X-v_Y}{v_{\\text{in1}}-v_{\\text{in2}}}\n\\approx \\frac{g_{m1}}{g_{m5}} .\n\\]\n\nWidening \\(M_7\\) increases the tail current, so both \\(g_{m1}\\) and \\(g_{m5}\\) increase roughly as \\(\\sqrt{I_T}\\). Their ratio therefore remains nearly unchanged:\n\n\\[\n\\frac{g_{m1}}{g_{m5}}\n\\approx\n\\sqrt{\\frac{(W/L)_1}{(W/L)_5}}.\n\\]\n\nThus, a larger \\(M_7\\) mainly increases current, regeneration speed, and power. In a real circuit, the reduced output resistance at higher current can cause a small practical reduction in gain.",
        "format": "markdown",
        "sha256": "5ebadccf174ca730287faf8a4f72fa12947f6eb090d1d060119aeb761ca765fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion that initial gain stays approximately constant is wrong; it decreases as M7 widens. The answer correctly notes that tail current rises, but its gm1/gm5 ratio misses the relevant gain dependence on gm/ICM.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3611,
        "output_tokens": 12850,
        "total_tokens": 16461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3611,
        "output_tokens": 12850,
        "total_tokens": 16461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12659,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The initial differential voltage gain is essentially **unchanged** by increasing \\(W_7\\).\n\n\\(M_7\\) is the common-tail device, so it mainly sets the tail current. In differential mode, its drain node acts approximately as a virtual ground, and \\(M_7\\) does not directly contribute to the differential signal gain. For example, in the ideal balanced-state model,\n\n\\[\n|A_{v0}| \\approx \\frac{g_{m1}}{g_{m5}} .\n\\]\n\nSince the relevant devices carry the same branch current, their transconductance ratio depends mainly on their sizes, not on the tail-current level. Thus increasing \\(W_7\\) increases tail current, power, and regeneration speed, but does not appreciably change the first-order initial gain.\n\nSmall changes can occur secondarily because of bias-point shifts, finite output resistance, or insufficient headroom.",
        "format": "markdown",
        "sha256": "dea51aa6e992021fa8ff3af446513928a445bac34f768d63f170963d96f2d001"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central trend is wrong: increasing W7 raises tail current and decreases the initial gain (roughly because gm/ICM falls). The answer recognizes M7 sets tail current, but its gm1/gm5 model does not capture the initial integration gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3611,
        "output_tokens": 23674,
        "total_tokens": 27285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3611,
        "output_tokens": 23674,
        "total_tokens": 27285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitances at \\(P\\) and \\(Q\\) **reduces the initial dynamic voltage gain and slows regeneration**.\n\nThe input differential is converted by \\(M_1\\)–\\(M_2\\) into a differential current, approximately\n\n\\[\ni_d \\simeq g_m v_{id},\n\\]\n\nwhich charges the capacitances. Thus,\n\n\\[\n\\frac{d(v_P-v_Q)}{dt}\\simeq \\frac{i_d}{C}.\n\\]\n\nA larger \\(C\\) therefore produces a smaller initial differential signal at \\(P,Q\\), weakening the initial drive to the cross-coupled regenerative latch. The final rail-to-rail gain is essentially unchanged; the main effects are lower initial gain and longer regeneration delay. Strictly, the dc small-signal gain set by \\(g_m\\) and \\(r_o\\) is not changed.",
        "format": "markdown",
        "sha256": "e2a40bbaa366b28a33edba69bfd3e881d03d21c42f8860b40f9dcf2725314b81"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance reduces the differential-voltage slew rate and slows regeneration, but it incorrectly concludes that the initial gain decreases. The longer amplification interval proportionally offsets the smaller slew rate, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 3610,
        "output_tokens": 21178,
        "total_tokens": 24788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 3610,
        "output_tokens": 21178,
        "total_tokens": 24788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21015,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Increasing \\(C_P\\) and \\(C_Q\\) **reduces the effective initial voltage gain** and slows regeneration. The same differential current must now charge a larger capacitance, so\n\n\\[\n\\Delta v_{PQ}(t)\\propto \\frac{1}{C}\\,t,\n\\]\n\nand the nodes \\(P\\) and \\(Q\\) develop their differential voltage more slowly. Consequently, the regeneration pole moves to a lower frequency and the settling time increases.\n\nThe quiescent DC gain set by the transistors is essentially unchanged; it is the transient/effective initial gain that decreases.",
        "format": "markdown",
        "sha256": "ecebceea153cbb33422990ce70a18d460d06f5c686753751881a9f1e5bb0c881"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly says the initial gain decreases. Larger capacitance slows the transient, but it proportionally extends the amplification phase, so the capacitance cancels and the initial gain remains essentially unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 3610,
        "output_tokens": 21386,
        "total_tokens": 24996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21273,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 3610,
        "output_tokens": 21386,
        "total_tokens": 24996,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21273,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at \\(P\\) and \\(Q\\) **reduces the effective initial voltage gain** and slows the regenerative action.\n\nThe differential current from \\(M_1\\) and \\(M_2\\) must charge these capacitances:\n\n\\[\nC\\,\\frac{d(v_P-v_Q)}{dt}\\approx \\Delta i_{12}.\n\\]\n\nThus, for a fixed evaluation time, the differential voltage produced—and hence the initial gain—scales approximately as \\(1/C\\). Increasing \\(C_P\\) and \\(C_Q\\) therefore lowers the initial gain/regeneration slope and increases comparator delay. The final rail-to-rail output is unchanged if sufficient evaluation time is allowed.\n\nStrictly, the intrinsic low-frequency small-signal gain set by \\(g_m\\) and output resistances is unchanged; only the dynamic response is affected.",
        "format": "markdown",
        "sha256": "59e2617d49bfde679677e7529e6b93641e8a09e6828cc09c1534e64f52fe4502"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly says the initial gain decreases. Larger capacitance slows the transient, but it proportionally lengthens the amplification phase, so the capacitance cancels and the initial gain remains approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 3610,
        "output_tokens": 20380,
        "total_tokens": 23990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 3610,
        "output_tokens": 20380,
        "total_tokens": 23990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**A modest increase usually improves the latch’s evaluation speed.** M5 and M6 are the cross-coupled PMOS regenerative devices: increasing their widths lowers their pull-up resistance and strengthens the positive feedback, so the latch resolves faster and the rising output at \\(X/Y\\) becomes faster.\n\nHowever, larger devices also add drain and gate capacitance at \\(X\\) and \\(Y\\). This can slow the falling output and the initial evaluation, so if M5/M6 are already properly sized, excessive widening may degrade the worst-case delay and increase power.\n\nThus:\n\n- **Under-driven regenerative pair:** widening improves speed.\n- **Already optimized or excessively widened:** worst-case speed may degrade.\n\nThe definitive check is to compare both output rise and fall delays after resizing.",
        "format": "markdown",
        "sha256": "a94981f45a4530f5a3c48846fefc49fd52ddf07cf74811416acd18cfe6b871bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that modest widening initially improves speed by strengthening regeneration, and notes that added capacitance can limit the benefit or degrade speed when oversized.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3610,
        "output_tokens": 17765,
        "total_tokens": 21375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3610,
        "output_tokens": 17765,
        "total_tokens": 21375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Normally, the speed improves.** M5 and M6 form the cross-coupled PMOS regenerative-feedback pair. Increasing their widths raises their drive current and transconductance, so one output is pulled high faster and the differential regenerates sooner.\n\nThe trade-off is increased parasitic capacitance on \\(X\\) and \\(Y\\), higher dynamic power, and possibly more transition contention. Thus a moderate size increase generally improves speed, while making them excessively large can eventually reduce the benefit; the optimum depends on the output load.",
        "format": "markdown",
        "sha256": "5ef6e921093d913ec0730fed7a39044d2ff50ef349ec180a4547fc8f8dee2be7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M5/M6 as the cross-coupled PMOS regenerative pair and explains that stronger regeneration initially improves speed, while added capacitance eventually limits the benefit.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3610,
        "output_tokens": 12203,
        "total_tokens": 15813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3610,
        "output_tokens": 12203,
        "total_tokens": 15813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Increasing the widths of \\(M_5\\) and \\(M_6\\) generally improves the pull-up and latch-regeneration speed.** They are the cross-coupled PMOS pull-up devices, so increasing \\(W/L\\):\n\n- increases their pull-up current,\n- lowers their on-resistance,\n- helps nodes \\(X\\) and \\(Y\\) switch and the latch regenerate sooner.\n\nHowever, wider devices also add parasitic capacitance at \\(X\\) and \\(Y\\). Thus the rising transition improves, while the opposing falling transition may become slower because of the extra loading. If \\(M_5\\) and \\(M_6\\) are already sufficiently strong, further widening can degrade the worst-case delay and increase power.\n\nSo, in practice, increase their widths **only until the rise/fall delays are balanced**; otherwise there is no unconditional speed improvement.",
        "format": "markdown",
        "sha256": "956e23b428a377ecf87c39c43c464cee1e63ecaa801556009dc3dfcb6cf44970"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that wider M5/M6 initially strengthen pull-up and regeneration, while added node capacitance eventually limits or can reverse the speed benefit. The rise/fall-balancing comment is a secondary design nuance.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3610,
        "output_tokens": 15592,
        "total_tokens": 19202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3456,
        "input_tokens": 3610,
        "output_tokens": 15592,
        "total_tokens": 19202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**It is not unconditionally true: there is an optimum clock-transistor width.**\n\nThe clock-controlled transistors are in series with the signal-controlled devices \\(M_1\\). Increasing their widths has two competing effects:\n\n- Their on-resistance decreases approximately as \\(1/W\\), which tends to **improve** rise/fall speed.\n- Their drain diffusion capacitance increases approximately in proportion to \\(W\\), adding capacitance directly to nodes \\(X\\) and \\(Y\\). Their gate capacitance also increases the load on \\(CK\\) and \\(\\overline{CK}\\). These effects tend to **degrade** speed, especially if the clock is generated by a finite-resistance driver.\n\nApproximately, for one clocked stage,\n\\[\nt_{pd}\\approx 0.69\\,R_{\\text{eff}}(W)\\,[C_L+C_{\\text{par}}(W)],\n\\]\nwith\n\\[\nR_{\\text{eff}}\\approx R_{M_1}+\\frac{k}{W},\n\\qquad\nC_{\\text{par}}\\approx qW.\n\\]\n\nThus:\n\n- If the clocked transistors are undersized and resistance dominates, widening them **improves speed**.\n- If they are already large enough that resistance is no longer dominant, further widening **degrades speed** because the added capacitance and clock loading dominate.\n- In the near-unloaded case, \\(R\\downarrow 1/W\\) and \\(C\\uparrow W\\), so speed may change very little.\n\nFor the ring-like circuit, the conclusion applies to\n\\[\nf_{\\text{osc}}\\approx\\frac{1}{2(t_{ZX}+t_{XY}+t_{YZ})}.\n\\]\n\nSo the practical answer is: **widening can initially improve the circuit, but beyond the optimum it slows it down; the best widths must be found with the actual loads, parasitics, and clock-driver resistance included.**",
        "format": "markdown",
        "sha256": "a991a514e835a9f1c9742e91dc6844e522aff4607a360f9da13d7f68d693ffba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by reducing the clocked devices’ on-resistance, while added node capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2400,
        "output_tokens": 15502,
        "total_tokens": 17902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2400,
        "output_tokens": 15502,
        "total_tokens": 17902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Normally, a moderate increase in the clocked-transistor widths improves speed**, provided the complementary clocks do not overlap and the clock driver is adequately sized.\n\nThe clocked transistors are in series with the other pull-up/pull-down transistors:\n\n\\[\nR_{\\text{path,up}}\\approx R_{\\text{clock}}+R_{\\text{input/feedback}},\n\\qquad\nR_{\\text{path,down}}\\approx R_{\\text{clock}}+R_{\\text{input/feedback}} .\n\\]\n\nIncreasing the clock-transistor width \\(W\\) lowers its on-resistance,\n\n\\[\nR_{\\text{on}}\\propto \\frac{1}{W},\n\\]\n\nso \\(X\\) and \\(Y\\) can charge and discharge faster.\n\nHowever, the improvement does not continue indefinitely:\n\n- The clocked transistor is in series with another transistor. Once  \n  \\[\n  R_{\\text{clock}} \\ll R_{\\text{input/feedback}},\n  \\]\n  the latter limits the current, so extra width provides little speed benefit.\n- Wider transistors add drain capacitance at \\(X\\) and \\(Y\\) and gate capacitance on the \\(CK/\\overline{CK}\\) nets.\n- If the clock driver is not enlarged, the increased clock load can make the clock edges slower.\n- Any overlap between \\(CK\\) and \\(\\overline{CK}\\) causes simultaneous pull-up/pull-down conduction; wider devices increase this contention current and power.\n\nThus, **modest widening improves speed**, but excessive widening can give diminishing returns or actually degrade delay. A practical target is to size the clocked devices so that their on-resistance is roughly comparable to, or somewhat smaller than, that of the series feedback/input devices.",
        "format": "markdown",
        "sha256": "98bc6676f617cb9cda9abd9ce54b1ef1597fc2d042c7ee3bc98152daadf31f07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says widening initially improves speed by reducing clocked-device on-resistance, and recognizes that added capacitance at the latch nodes eventually limits or can reverse the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2399,
        "input_tokens": 2400,
        "output_tokens": 17415,
        "total_tokens": 19815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2399,
        "input_tokens": 2400,
        "output_tokens": 17415,
        "total_tokens": 19815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17079,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**Short answer: not necessarily. There is an optimum size.** Making the clocked transistors wider initially speeds up the circuit, but making them arbitrarily large can make it slower.\n\n- When \\(CK=1\\), the left-hand clocked transistors are enabled and update \\(X\\), while the right-hand pair is disabled.\n- When \\(CK=0\\), the right-hand pair is enabled and updates \\(Y\\), after which \\(Z\\) follows through the inverter.\n\nEach clocked transistor is in series with a data-controlled transistor, so its on-resistance is approximately\n\n\\[\nR_{\\text{on,clk}}\\propto \\frac{1}{W_{\\text{clk}}}.\n\\]\n\nIncreasing \\(W_{\\text{clk}}\\) therefore reduces the resistance of the conducting path. However, it also increases:\n\n- drain/source diffusion capacitance at \\(X\\), \\(Y\\), and the internal nodes,\n- the gate capacitance loading \\(CK\\) and \\(\\overline{CK}\\),\n- dynamic power and clock current.\n\nA simplified delay model is\n\n\\[\nt_p \\sim \\left(R_{\\text{data}}+\\frac{k}{W_{\\text{clk}}}\\right)\n      \\left(C_{\\text{external}}+cW_{\\text{clk}}\\right).\n\\]\n\nThus:\n\n- if the clocked transistor is undersized, increasing its width improves speed because the resistance reduction dominates;\n- once it is comparable to or larger than the series data-controlled transistor, further widening adds capacitance with little resistance benefit and can degrade speed;\n- with a real, finite-resistance clock driver, the increased clock-gate capacitance can slow the clock edges themselves, causing an overall speed degradation.\n\nSo the practical answer is: **increase them moderately if they are the bottleneck, but do not enlarge them indiscriminately; size them using extracted parasitic capacitance and clock-slew simulation.** Under the unrealistic assumptions of an ideal clock and fixed zero parasitic load, wider clocked transistors would simply improve speed.",
        "format": "markdown",
        "sha256": "886450cd9173ca2ceaaf6fc96f9dcb866bdcdea73b42fe43679b2e171197f2f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that widening initially improves speed by lowering the clocked devices’ on-resistance, while added capacitance eventually limits or reverses the benefit, giving an optimum width.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2399,
        "input_tokens": 2400,
        "output_tokens": 16179,
        "total_tokens": 18579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15793,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2399,
        "input_tokens": 2400,
        "output_tokens": 16179,
        "total_tokens": 18579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15793,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Yes—**nominally, the circuit provides quadrature phases of a divide-by-2 clock**.\n\n- During \\(CK=1\\), the left section is active and makes  \n  \\[\n  X=\\overline{Z},\n  \\]\n  while the right section holds.\n- During \\(CK=0\\), the right section makes  \n  \\[\n  Y=\\overline{X},\n  \\]\n  and therefore, after the inverter,\n  \\[\n  Z=\\overline{Y}=X.\n  \\]\n\nConsequently:\n\n- \\(X\\) toggates on the rising edge of \\(CK\\).\n- \\(Y\\), and hence \\(Z\\), toggles on the falling edge of \\(CK\\).\n\nIf \\(T_{CK}\\) is the input-clock period, both \\(X\\) and \\(Z\\) have an output period \\(2T_{CK}\\), and their transitions are separated by \\(T_{CK}/2\\). Thus their relative phase is\n\n\\[\n360^\\circ\\frac{T_{CK}/2}{2T_{CK}}=90^\\circ.\n\\]\n\nSo **\\(X\\) and \\(Z\\) form one quadrature pair**; **\\(X\\) and \\(Y\\) also form a quadrature pair with the opposite phase sense**, while \\(Y\\) and \\(Z\\) are complementary.\n\nActual quadrature will only be approximate in silicon because of clock-duty-cycle error and unequal propagation delays, including the delay of \\(\\mathrm{Inv}_3\\). Proper non-overlap of \\(CK\\) and \\(\\overline{CK}\\) is also required.",
        "format": "markdown",
        "sha256": "20123018f3131dcdc3bb92427b0a46752df4f5c1aa86015b88c1ce02b3056c8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature and the half-input-period (90° output) separation. It notes Inv3 delay and generic propagation-delay mismatch, but does not identify unequal loading of the two latches as the other key source of non-ideal phase spacing.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2387,
        "output_tokens": 17280,
        "total_tokens": 19667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2387,
        "output_tokens": 17280,
        "total_tokens": 19667,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16982,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Yes—ideally, it generates a **divide-by-two quadrature pair**.\n\n- The left C²MOS-like latch is transparent when \\(CK=1\\), so \\(X\\) toggles on the rising-clock phase.\n- The right latch is transparent when \\(CK=0\\), so \\(Y\\) and \\(Z=\\overline{Y}\\) toggle on the falling-clock phase.\n- Therefore, \\(X\\) and \\(Z\\) are approximately \\(T_{CK}/2\\) apart. Since the output period is \\(2T_{CK}\\),\n\n\\[\n\\frac{T_{CK}/2}{2T_{CK}}\\times 360^\\circ=90^\\circ .\n\\]\n\nThus \\(X\\) and \\(Z\\) form a quadrature pair; \\(X\\) and \\(Y\\) are also quadrature but in the opposite phase direction. \\(Y\\) and \\(Z\\) are complementary, so they are \\(180^\\circ\\) apart.\n\nExact quadrature requires a 50%-duty-cycle clock, clean complementary \\(CK/\\overline{CK}\\) signals without excessive overlap, and balanced propagation delays.",
        "format": "markdown",
        "sha256": "c10c4dcd7a8d1b204f45c82fb1aa0ef8d1397c21e654659902c6208d73f13c76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature relationship and notes that propagation delays can prevent exact quadrature. It does not identify the specific Inv3 delay skew or the unequal loading of the two latch outputs, so it misses the full-credit explanation.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2386,
        "input_tokens": 2387,
        "output_tokens": 13557,
        "total_tokens": 15944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2386,
        "input_tokens": 2387,
        "output_tokens": 13557,
        "total_tokens": 15944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "No. The circuit does not inherently generate quadrature (90°-separated) outputs.\n\n- \\(Z=\\overline{Y}\\) because of \\(\\mathrm{Inv}_3\\).\n- \\(X\\) and \\(Y\\) are internal nodes in the clock-controlled feedback path \\(Z\\!\\rightarrow X\\!\\rightarrow Y\\!\\rightarrow Z\\).\n- The explicit clock signals \\(CK\\) and \\(\\overline{CK}\\) are 180° apart, not 90°.\n\nMoreover, if the feedback path is treated as a three-stage oscillator with equal stage delays, adjacent outputs would be approximately \\(360^\\circ/3=120^\\circ\\) apart, not \\(90^\\circ\\). A four-stage delay/ring structure or an explicit quarter-period delay would be needed for quadrature outputs.",
        "format": "markdown",
        "sha256": "a5cacbfae6d6dbb018beebd3ce9f0df8032a656dc34cb4eb2c7f02a95c1fbcf5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misses the nominal quadrature behavior of the C2MOS divide-by-two and incorrectly treats the circuit as a three-stage oscillator. Although it correctly notes that Z is the inversion of Y, its conclusion and reasoning are fundamentally wrong.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2386,
        "input_tokens": 2387,
        "output_tokens": 12900,
        "total_tokens": 15287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2386,
        "input_tokens": 2387,
        "output_tokens": 12900,
        "total_tokens": 15287,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**With an ideal clock and fixed data transistors, increasing the widths of the clocked transistors generally improves the local switching speed.** Each clocked device is in series with a data-controlled device, so\n\n\\[\nR_{\\text{eff,up}}\\approx R_{\\text{data,p}}+R_{\\text{clk,p}},\\qquad\nR_{\\text{eff,down}}\\approx R_{\\text{data,n}}+R_{\\text{clk,n}},\n\\]\n\nand \\(R_{\\text{clk}}\\propto 1/W_{\\text{clk}}\\). Thus wider clocked transistors reduce the series resistance and shorten the output rise/fall and clock-to-output delays. The benefit eventually saturates once the data-controlled transistor dominates.\n\nThere are, however, system-level penalties:\n\n- Clock-gate and parasitic capacitance increase with width.\n- A finite clock driver may therefore deliver CK/\\(\\overline{CK}\\) more slowly.\n- Dynamic and overlap current increase.\n- The stronger paths in the feedback structure can reduce timing/noise margin.\n\nSo the precise answer is: **the shown stages switch faster with an ideal clock, but overall circuit speed may degrade if the increased clock loading is not compensated by a stronger clock tree.**",
        "format": "markdown",
        "sha256": "c77cca7654fee94613dd22b3fda92ae0b3c72ee350b5e95b49974774c2f06199"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that wider clocked transistors reduce series resistance and improve switching with an ideal clock. It omits the key charge-sharing effect and adds a clock-loading caveat not central to the topology, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2465,
        "output_tokens": 18382,
        "total_tokens": 20847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2465,
        "output_tokens": 18382,
        "total_tokens": 20847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18143,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**With ideal CK and \\(\\overline{CK}\\) signals, increasing the clock-transistor widths improves the speed.**\n\nThe clock-controlled devices are in series with the data-controlled pull-up/pull-down devices. Their on-resistance is approximately\n\n\\[\nR_{\\text{on,clk}}\\approx\n\\frac{1}{\\mu C_{\\text{ox}}(W/L)_{\\text{clk}}(V_{GS}-V_T)} .\n\\]\n\nThus, increasing their widths lowers the series resistance of the enabled pull-up or pull-down path. Since\n\n\\[\nt_{\\text{stage}}\\approx 0.69\\,(R_{\\text{data}}+R_{\\text{clk}})C_{\\text{load}},\n\\]\n\nthe stage delay decreases, and the oscillation frequency of the circuit in the figure increases. The clock devices terminate at internal nodes rather than directly at the logic output, so their added drain capacitance has only a secondary effect on the output delay.\n\nHowever, wider clock transistors also:\n\n- increase clock-gate capacitance \\(C_g\\propto W\\),\n- increase internal-node diffusion capacitance,\n- increase clock power,\n- make CK and \\(\\overline{CK}\\) slower if driven by a finite-resistance clock driver.\n\nTherefore, **the schematic-level answer is “speed improves,” but in a real circuit there is an optimum width**; making the clock transistors excessively large can slow the clock edges enough to offset or even reverse the improvement.",
        "format": "markdown",
        "sha256": "ec9e5b7e4f96bd6c2388c66814cbc557a1b5e82661ff767857e569bdb8055f66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that wider clocked transistors improve speed by reducing series on-resistance, with little added output loading. It omits the charge-sharing swing degradation that the golden solution requires for full credit; its discussion of clock loading does not substitute for that point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2465,
        "output_tokens": 18446,
        "total_tokens": 20911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2465,
        "output_tokens": 18446,
        "total_tokens": 20911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**It depends on what is included in the measured delay.**\n\n- **With an ideal clock and a settled CK/ĈK:** the data-path speed **improves**. Each clocked transistor is in series with a pull-up/pull-down transistor, so increasing its width reduces its on-resistance:\n  \\[\n  R_{\\text{eff}}\\approx R_{\\text{data transistor}}+R_{\\text{clock transistor}} .\n  \\]\n  A stronger pull network charges or discharges the next node faster.\n\n- **For the overall clock-to-output/toggle speed in a real circuit:** increasing the widths too much can **degrade** performance. Wider devices add\n  - clock-gate capacitance on CK and \\(\\overline{CK}\\), slowing clock edges if the clock driver has finite resistance;\n  - drain-junction capacitance on the internal series nodes;\n  - dynamic and short-circuit power.\n\n  Moreover, during clock activation the internal node must be charged or discharged. If its capacitance is dominated by the clock transistor's own diffusion,\n  \\[\n  R_{\\text{clk}}C_{\\text{int}}\\sim \\frac{1}{W}\\times W\\approx \\text{constant},\n  \\]\n  so widening gives little benefit for that part of the delay.\n\nThus, **under the usual ideal-clock assumption, the logic delay improves**; in a practical clocked implementation there is an optimum width, and excessive widening can make the overall speed worse.",
        "format": "markdown",
        "sha256": "f569cbfa0fd29a9cfd6c7ca9bc6010b62dd714ac25c7a5122f54bd9844ae12f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly says widening the clocked devices reduces series resistance and improves data-path speed. However, it omits charge sharing, the key swing-degradation limit, and instead suggests excessive width can degrade practical speed due to clock loading.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2465,
        "output_tokens": 31043,
        "total_tokens": 33508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2464,
        "input_tokens": 2465,
        "output_tokens": 31043,
        "total_tokens": 33508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 30754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming the left switch is enabled by \\(CK\\), the right switch by \\(\\overline{CK}\\), this is intended as a **clocked divide-by-two/toggle arrangement**.\n\n### Topology\n\nLet \\(Q\\) be the output of the rightmost inverter:\n\n\\[\nQ \\;-\\;S_{CK}\\;-\\;\\mathrm{Inv}_1\\;-\\;S_{\\overline{CK}}\\;-\\;\\mathrm{Inv}_2\\;-\\;\\mathrm{Inv}_3\\;-\\;Q\n\\]\n\nThe last two inverters together have even polarity, so they act as a non-inverting buffer when their input is driven.\n\n### Intended operation\n\nFor ideal complementary, non-overlapping switches:\n\n| Clock phase | Left switch | Right switch | Operation |\n|---|---:|---:|---|\n| \\(CK=1\\) | closed | open | \\(\\mathrm{Inv}_1\\) calculates \\(Y=\\overline{Q}\\); \\(Q\\) is intended to hold |\n| \\(CK=0\\) | open | closed | The two right inverters transfer \\(Y\\) to \\(Q\\), so \\(Q=Y\\) |\n\nConsequently, over one complete clock cycle,\n\n\\[\nQ_{\\text{new}}=\\overline{Q_{\\text{old}}}.\n\\]\n\nThus \\(Q\\) alternates between 0 and 1 once per input cycle:\n\n\\[\n0\\rightarrow1\\rightarrow0\\rightarrow1\\rightarrow\\cdots\n\\]\n\nso the output frequency is approximately\n\n\\[\nf_Q=\\frac{f_{CK}}{2}.\n\\]\n\nWith the assumed switch phasing, the output changes during the \\(CK=0\\) phase, effectively on the falling edge. Reversing the switch phasing would move the update to the rising edge.\n\n### Important practical concerns\n\n- The open switch leaves an inverter input floating. The diagram implicitly assumes dynamic charge retention or ideal “hold” behavior. In real CMOS logic, this is unreliable without keeper devices or explicit storage elements.\n- The switches must have **break-before-make** timing. If both are momentarily closed, the entire loop is active and contains three inversions—an odd number. In a real circuit this becomes a ring oscillator or produces a race/corrupted state.\n- If both switches are open, the state is not guaranteed.\n- No reset or defined startup state is shown.\n\nTherefore, conceptually it behaves as a divide-by-two toggle, but as drawn it is a fragile dynamic implementation. A conventional toggle flip-flop or properly latched master–slave arrangement would be more reliable.",
        "format": "markdown",
        "sha256": "2d8cfbaca5344608dcd750160d63f285e16010477fbb3aee9a73647654ce91a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic clocked divide-by-two and gives the essential half-frequency behavior; the additional timing and implementation discussion is not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1619,
        "output_tokens": 12209,
        "total_tokens": 13828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1619,
        "output_tokens": 12209,
        "total_tokens": 13828,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11720,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "## Topology\n\nThis is an **odd-inverter feedback ring** with two complementary clock-controlled switches:\n\n- Three inverters are connected from left to right.\n- The output of the third inverter is fed back to the first inverter through the two switches.\n- The two switches are controlled by \\(CK\\) and \\(\\overline{CK}\\), so ideally exactly one is closed at a time.\n\nThe three inverters give an odd number of inversions. Therefore, **if both switches were closed**, the loop would have no stable Boolean solution:\n\n\\[\nQ=\\overline{Q}\n\\]\n\nand the circuit would behave as a free-running ring oscillator. With the complementary switch controls, however, the complete loop is normally never closed.\n\n## Operation with the usual switch convention\n\nAssume:\n\n- The \\(CK\\) switch closes when \\(CK=1\\).\n- The \\(\\overline{CK}\\) switch closes when \\(CK=0\\), i.e. when \\(CK=0\\).\n\nLet:\n\n- \\(Q\\) be the output of the rightmost inverter.\n- \\(P\\) be the output of \\(\\mathrm{Inv}_1\\).\n\n| Clock state | \\(CK\\) switch | \\(\\overline{CK}\\) switch | Circuit state |\n|---|---|---|---|\n| \\(CK=1\\) | Closed | Open | \\(P=\\overline{Q}\\); \\(Q\\) is stored |\n| \\(CK=0\\) | Open | Closed | \\(P\\) propagates through two inverters, so \\(Q=P\\) |\n\nThus:\n\n1. During the high phase, \\(P\\) stores the complement of \\(Q\\).\n2. On the falling edge of \\(CK\\), the right switch closes and the left switch opens.  \n   Since the two right-hand inverters give an even number of inversions,\n   \\[\n   Q_{\\text{new}}=P=\\overline{Q_{\\text{old}}}.\n   \\]\n   Therefore, \\(Q\\) toggles.\n3. On the rising edge, the right switch opens, so \\(Q\\) remains unchanged while \\(P\\) is updated.\n\nConsequently, the output toggles once per clock cycle:\n\n\\[\nf_Q=\\frac{f_{CK}}{2}.\n\\]\n\nIt is therefore best viewed as a **clocked broken-ring toggle/divide-by-two circuit**, rather than a continuously oscillating ring oscillator. If the switches use the opposite polarity convention, the active edge changes to the rising edge, but the division-by-two behavior remains.\n\n## Important practical issues\n\n- **Break-before-make is essential.** If both switches are momentarily closed, all three inverters form a closed odd-inversion loop and may oscillate, corrupting the stored state.\n- **Floating-node storage is required.** When a switch is open, an inverter input may retain charge only parasitically; leakage can cause the state to drift. A keeper or sufficiently strong storage may be needed.\n- There must be enough time in each clock phase for the relevant inverter path to settle.\n- In the literal state drawn, with both switches open, there is no closed feedback path, so the node values are primarily retained or undefined depending on the implementation.",
        "format": "markdown",
        "sha256": "6fd2d552885dbf9981d772813f8e4a8d852ba094ffda4894b83de6560ff5ebf3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the clocked inverter/switch arrangement as a divide-by-two and explains that the output toggles at half the clock frequency. Its discussion of stored charge and leakage captures the dynamic-storage operation; the additional topology details do not undermine the essential answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1618,
        "input_tokens": 1619,
        "output_tokens": 14594,
        "total_tokens": 16213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1618,
        "input_tokens": 1619,
        "output_tokens": 14594,
        "total_tokens": 16213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "### Circuit topology\n\nThe diagram contains a feedback path containing:\n\n1. A switch controlled by \\(CK\\)\n2. Inverter \\(\\mathrm{Inv}_1\\)\n3. A switch controlled by \\(\\overline{CK}\\)\n4. Two more inverters\n5. A return wire from the final inverter output to the input of the first inverter\n\nThus, there are **three inversions around the loop**.\n\n### If both switches are closed\n\nLet the signal at the input of \\(\\mathrm{Inv}_1\\) be \\(x\\). Passing through the three inverters gives\n\n\\[\nx=\\overline{\\overline{\\overline{x}}}=\\overline{x},\n\\]\n\nwhich has no valid Boolean solution. In a real circuit, this regenerative feedback produces oscillation, with a small perturbation or noise starting it.\n\nThe approximate oscillation frequency is\n\n\\[\nf_{\\text{osc}}\\approx\n\\frac{1}{2\\left(t_{pd1}+t_{pd2}+t_{pd3}\\right)},\n\\]\n\nwith switch resistance and parasitic loading included when significant.\n\n### Effect of the complementary switches\n\nUnder the usual interpretation that \\(CK\\) closes the first switch and \\(\\overline{CK}\\) closes the second:\n\n| Closed switch | Result |\n|---|---|\n| \\(CK\\) only | The feedback from the last inverter to \\(\\mathrm{Inv}_1\\) exists, but the connection from \\(\\mathrm{Inv}_1\\) to the second inverter is open. |\n| \\(\\overline{CK}\\) only | The forward inverter path is connected, but the return path is open. |\n| Both | The complete three-inverter ring is closed and can oscillate. |\n| Neither | The ring is broken and nodes may float. |\n\nSince ideal \\(CK\\) and \\(\\overline{CK}\\) are never both asserted, **normally only one switch is closed**, so the complete ring is interrupted and sustained oscillation does not occur. Moreover, an inverter input connected through an open switch is high-impedance—not a guaranteed logic 0 or logic 1—so the output is not reliably defined.\n\n### Clock-transition effects\n\nReal complementary clocks have finite skew:\n\n- **Break-before-make:** both switches are briefly open, producing a dead interval and possible floating/metastable nodes.\n- **Make-before-break:** both switches are briefly closed, temporarily enabling the ring and potentially causing glitches or a circulating pulse.\n\n### Conclusion\n\n- As literally drawn, both switches are open, so this is not a functioning closed-loop oscillator.\n- If the switches are driven by complementary clocks, the arrangement normally prevents sustained oscillation.\n- If the intended function is a gated ring oscillator, both switches must be capable of closing simultaneously, or the enable mechanism should be redesigned so that the entire feedback path is reliably closed when enabled.\n- If the intended function is a clocked toggle/divider, explicit pull-up/pull-down devices or storage elements are needed; relying on the open-switch nodes is not electrically robust.",
        "format": "markdown",
        "sha256": "1274214323b7883cddbfe3c3f01dc7cfe5528ab9256c8f24e6e346c3fa7e9c91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a switched ring-oscillator arrangement and concludes it does not function, missing the essential divide-by-two operation of the dynamic latches.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1618,
        "input_tokens": 1619,
        "output_tokens": 12653,
        "total_tokens": 14272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1618,
        "input_tokens": 1619,
        "output_tokens": 12653,
        "total_tokens": 14272,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The red inverter \\(Inv_1\\) is not simply an extra inverter in series; it creates a second path from the left feedback node to the node after the first black inverter.\n\n- **When the \\(CK\\) switch is closed**, it is effectively a parallel inverter with the switch-plus-black-inverter path. Both produce the same logic polarity. The red inverter can reduce the effective output resistance and improve the transition time at that node, but it also:\n  - increases loading on the feedback node,\n  - increases area and switching power,\n  - can cause brief contention or glitches if the two paths have different delays.\n\n- **When the \\(\\overline{CK}\\) switch is closed**, the red inverter closes a feedback loop consisting of itself and the two right-hand inverters. That is an odd number of inversions, so the real circuit can behave as a ring oscillator. Its propagation delay then directly affects the oscillation frequency, approximately\n  \\[\n  f_{\\text{osc}}\\approx \\frac{1}{2\\left(t_{\\text{red}}+t_{\\text{switch}}+t_{\\text{right1}}+t_{\\text{right2}}\\right)}.\n  \\]\n\nThus, \\(Inv_1\\) can make the active path faster, but it also introduces extra power, delay sensitivity, and possible race/oscillation behavior. Non-overlapping \\(CK\\) and \\(\\overline{CK}\\) phases are important if the two switch-controlled paths are both used.",
        "format": "markdown",
        "sha256": "92202e9b0374cc2e4de70a857d18fb8f7e483cd80472dd234add9a494812466d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the bypass feedforward path, its speed benefit, and the possible three-inversion regenerative loop. It omits the key low-frequency drawback: the unclocked branch can overwhelm the main path and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1421,
        "output_tokens": 11431,
        "total_tokens": 12852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1421,
        "output_tokens": 11431,
        "total_tokens": 12852,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The red inverter has two main effects.\n\n- **It creates a regenerative feedback path.** When the right-hand \\(\\overline{CK}\\) switch is closed, the loop contains the red inverter plus the two right-hand black inverters—three inversions total. An odd number of inversions gives positive feedback, so the loop tends to oscillate like a ring oscillator rather than settle. Any initial mismatch can start the oscillation.\n\n- **It changes delay and power.** Its propagation delay is included in the feedback-loop delay. For a ring-oscillator interpretation, the approximate frequency is\n  \\[\n  f_{\\text{osc}}\\approx \\frac{1}{2\\left(t_{pd,\\text{Inv1}}+t_{pd,2}+t_{pd,3}\\right)}.\n  \\]\n  It also adds input loading on the feedback node, area, leakage, and dynamic switching power.\n\nWhen the \\(CK\\) switch is closed, the red inverter is effectively in parallel with the first black inverter: both have the same input and the same polarity, so they do not fight logically. The red inverter strengthens that node and can improve its rise/fall time, but at the cost of extra loading and power.\n\nTherefore, if this is intended as a gated ring oscillator, the red inverter is essential for oscillation and determines part of its frequency. If the circuit is intended as a stable latch or toggle storage element, the added feedback path can introduce unintended oscillation, timing races, jitter, and difficult static-timing analysis.",
        "format": "markdown",
        "sha256": "62c99e86371141ffe1464d258ef569e4ba1ac72c3e1c422a2f3bf08ae39aa5a8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the three-inversion loop that can toggle when the CKbar switch is on, but misses the key feedforward bypass that improves divider speed and the low-frequency drawback that raises the minimum usable clock frequency. Its ring-oscillator framing and positive-feedback explanation are also imprecise.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1421,
        "output_tokens": 15786,
        "total_tokens": 17207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1421,
        "output_tokens": 15786,
        "total_tokens": 17207,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Let \\(X\\) be the node to the left of the \\(CK\\) switch and \\(Y\\) the node after the first black inverter. The red inverter makes\n\n\\[\nY=\\overline{X},\n\\]\n\nso it forms a **parallel path** around the \\(CK\\)-switch-and-inverter path; it is not simply an extra series delay.\n\nIts main effects are:\n\n- **Possible shorter delay:** \\(Y\\) can begin changing through Inv1 before the signal gets through the switch and black inverter.\n- **Output contention:** Two ordinary push-pull inverter outputs are tied together. If they change at different times, they can briefly drive opposite states, causing short-circuit current, a runt/glitch, or increased delay.\n- **Clock-gating bypass:** Since Inv1 is independent of the \\(CK\\) switch, \\(Y\\) can change even when the switch is open. It therefore acts somewhat like a keeper, although the floating input of the black inverter could still cause contention.\n- **Feedback/oscillation concern:** When the \\(\\overline{CK}\\) switch is closed, the two right-hand inverters feed \\(Y\\) back to \\(X\\), and Inv1 completes a loop with an odd number of inversions:\n\n\\[\nY\\rightarrow \\text{INV}\\rightarrow \\text{INV}\\rightarrow X\n\\rightarrow \\text{Inv1}\\rightarrow Y .\n\\]\n\nIdeally this is a three-inverter ring oscillator, so the circuit may oscillate or settle metastably rather than have a stable logic value.\n\nThus Inv1 can improve apparent propagation speed in some circumstances, but it adds capacitance, area, power, contention risk, and potentially changes the circuit from stable logic into an oscillator. If this is intended as a clock-gating circuit, a properly isolated/weak keeper or standard clock-gating cell would usually be preferable.",
        "format": "markdown",
        "sha256": "075bfbc372583c988511ae2fce59ab1441d28286e16ebad4add7b2a6ac897b82"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the feedforward bypass, speed benefit, and possible three-inverter oscillation. But it misses the key low-frequency consequence: the unclocked branch can overpower the main path, raising the minimum usable clock frequency. Calling it somewhat like a keeper also mischaracterizes the branch.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1421,
        "output_tokens": 15153,
        "total_tokens": 16574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14787,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 1421,
        "output_tokens": 15153,
        "total_tokens": 16574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14787,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Not exactly. The red inverter is **keeper-like**, but it is not cross-coupled with `Inv1`.\n\nLet\n\n- \\(Q\\) be the node on the bottom feedback wire,\n- \\(X\\) be the output of `Inv1`, which is also the output of the red inverter.\n\nThe red inverter enforces\n\n\\[\nX=\\overline Q .\n\\]\n\nWhen the `CK` switch is closed, `Inv1` sees \\(Q\\) and also produces \\(X=\\overline Q\\), so the two inverters agree. When the `CK` switch opens, the input of `Inv1` is floating; the red inverter then keeps \\(X\\) at the proper complementary value while the other switch is open. Thus its useful role is to **retain/precharge the internal node at the output of `Inv1` during the switch-open interval**, rather than to form a latch with `Inv1`.\n\nA true cross-coupled pair would be something like\n\n\\[\nX=\\overline D,\\qquad D=\\overline X,\n\\]\n\nwhere each inverter's output drives the other inverter's input. Here, both `Inv1` and the red inverter drive the same node \\(X\\), so they are parallel drivers, not a cross-coupled pair.\n\nThere is also an important qualification: when the \\(\\overline{CK}\\) switch is closed, the two black inverters feed \\(X\\) back to \\(Q\\), giving \\(Q=X\\), while the red inverter requires \\(X=\\overline Q\\). These requirements conflict. Therefore:\n\n- the red inverter should normally be weak, or otherwise carefully clock-controlled;\n- if it is strong, it causes contention/metastability and can make the three-inversion loop oscillate;\n- it may remove leakage sensitivity of the particular internal node \\(X\\), but it does **not** by itself prove that the whole circuit has no minimum clock-frequency requirement.\n\nSo the best description is: **the red inverter is a feedback/keeper inverter for the `Inv1` output node, not the second inverter of a cross-coupled latch.**",
        "format": "markdown",
        "sha256": "9aae324aa1f59ed43a9a6d97a5c8e584897bb98dc0bb5dbabb34f9e41fa3dc7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly rejects a cross-coupled latch and recognizes that the CKbar-phase three-inversion loop can oscillate. But it misidentifies the red inverter as a keeper rather than the feedforward branch that bypasses the CK switch and Inv1, and misses the high-speed benefit and low-frequency failure tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1463,
        "output_tokens": 29285,
        "total_tokens": 30748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 1463,
        "output_tokens": 29285,
        "total_tokens": 30748,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28875,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is **not cross-coupled with `Inv1`**.\n\nLet:\n\n- \\(Q\\) be the output of the rightmost inverter, which is fed back along the bottom wire.\n- \\(X\\) be the common output node of `Inv1` and the red inverter.\n\nThe connections give:\n\n\\[\nX=\\overline{Q}\\qquad\\text{(red inverter)}\n\\]\n\n`Inv1` has the same output node \\(X\\), but its input is connected to \\(Q\\) only through the `CK` switch. Thus, when that switch is closed, the red inverter and `Inv1` are effectively **parallel inverters**, not a cross-coupled pair. Their outputs are even tied together, which is generally undesirable during clock transitions.\n\nMoreover, when the \\(\\overline{CK}\\) switch is closed, the two right-hand inverters give\n\n\\[\nQ=X.\n\\]\n\nCombined with the red inverter, this implies\n\n\\[\nX=\\overline{X},\n\\]\n\nwhich has no stable DC solution. In other words, the red inverter, the two right-hand inverters, and the bottom feedback wire form a three-inverter ring and tend to oscillate.\n\nTherefore, the red inverter is a **feedback/bypass inverter** that bypasses `Inv1` and the `CK` switch and participates in the ring feedback. It is not a leakage keeper and does not establish a static storage state.\n\nA real keeper would use two separate cross-coupled inverters between \\(Q\\) and \\(\\overline Q\\), providing continuous regeneration of both storage nodes. If this circuit is intended to be a latch, the red inverter is wired incorrectly; if it is intended to be a ring oscillator, then forming that feedback loop is its actual role.",
        "format": "markdown",
        "sha256": "fb69d83f5c9b3d7aab210c37ec1f46d90c49008f0c0f7c8a2a1bcb6f653bb41f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the bypass and possible ring, but misses the key feedforward role and its tradeoff: it can speed high-rate operation yet overpower the latch at low rates, raising the minimum usable clock frequency. Framing it as an intended ring oscillator also mischaracterizes the circuit.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1462,
        "input_tokens": 1463,
        "output_tokens": 24663,
        "total_tokens": 26126,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1462,
        "input_tokens": 1463,
        "output_tokens": 24663,
        "total_tokens": 26126,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Not for the reason stated. The red inverter and `Inv1` are **not cross-coupled**.\n\nLet\n\n- \\(Q\\) be the far-right output,\n- \\(X\\) be the input of `Inv1`,\n- \\(Y\\) be the common output node of `Inv1` and the red inverter.\n\nThe connections are\n\n\\[\nY=\\overline{Q}\\qquad\\text{(red inverter)}\n\\]\n\nand\n\n\\[\nY=\\overline{X}\\qquad\\text{(`Inv1`)}.\n\\]\n\nWhen the `CK` switch is closed, \\(X=Q\\), so both inverters drive \\(Y\\) to the same value; they are effectively parallel drivers. A true cross-coupled latch would require the red inverter's output to feed `Inv1`'s input and vice versa, with two separate output nodes.\n\n### Actual role\n\nThe red inverter is better described as a **feedback/retention inverter for the dynamic node \\(Y\\)**. When the `CK` switch is open, \\(X\\) floats and `Inv1` cannot reliably retain its state. The red inverter continues to drive\n\n\\[\nY=\\overline Q,\n\\]\n\nthereby restoring charge lost through leakage and preserving the complementary state until it is transferred through the \\(\\overline{CK}\\) switch.\n\nThus it may remove a leakage-imposed **minimum clock frequency** limit for that node, but not because it forms a cross-coupled latch with `Inv1`.\n\nThere is an important caveat: when the \\(\\overline{CK}\\) switch is closed, the red inverter together with the two inverters on the right forms a three-inversion feedback loop. A full-strength red inverter can therefore cause racing, metastability, or oscillation. It normally needs to be appropriately weak, or the clock phases must be non-overlapping/edge-sensitive.",
        "format": "markdown",
        "sha256": "b88e7e7ef4204ce2e87c8cc0718fe59c5e3454d8baaa9299664c2814c3cf2fb4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the cross-coupled-latch interpretation and notices the three-inversion loop, but misidentifies the red inverter as a retention path and reaches the opposite conclusion about minimum frequency. It is an unclocked feedforward bypass that can overpower the latch at low rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1462,
        "input_tokens": 1463,
        "output_tokens": 41590,
        "total_tokens": 43053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1462,
        "input_tokens": 1463,
        "output_tokens": 41590,
        "total_tokens": 43053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 41234,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Taking the schematic literally, \\(M_1\\) and \\(M_2\\) form a CMOS inverter whose gates are connected to the input node, with \\(R_F\\) providing drain-to-input feedback. A unique numerical optimum cannot be obtained without the process models, bias current, frequency, source/load impedances, and the definition of the 50-\\(\\Omega\\) requirement. However, the design can be optimized analytically as follows.\n\n### 1. Enforce the 50-\\(\\Omega\\) input-resistance constraint\n\nDefine\n\n\\[\ng_T=g_{m1}+g_{m2}, \\qquad\nr_o=r_{o1}\\parallel r_{o2}\\parallel R_L .\n\\]\n\nFor the circuit shown,\n\n\\[\nA_v\\equiv\\frac{v_o}{v_i}\n=\\frac{r_o(1-g_T R_F)}{r_o+R_F},\n\\]\n\nand the input resistance is\n\n\\[\n\\boxed{\nR_{\\mathrm{in}}=\\frac{r_o+R_F}{1+g_T r_o}\n}\n\\]\n\nThus, with \\(R_{\\mathrm{in}}=50~\\Omega\\),\n\n\\[\n\\boxed{\ng_T=\\frac{R_F+r_o-50}{50r_o}\n}\n\\]\n\nor equivalently,\n\n\\[\n\\boxed{\nR_F=50(1+g_T r_o)-r_o .\n}\n\\]\n\nIf \\(r_o\\gg R_F\\) and \\(g_T r_o\\gg1\\), this reduces approximately to\n\n\\[\nR_{\\mathrm{in}}\\simeq \\frac{1}{g_T},\n\\]\n\nso the main sizing requirement is\n\n\\[\n\\boxed{\ng_{m1}+g_{m2}\\simeq \\frac{1}{50}\n=20~\\mathrm{mS}.\n}\n\\]\n\nTherefore, do not simply make \\(R_F=50~\\Omega\\). \\(R_F\\) and the input resistance are not the same quantity. Also, \\(g_T R_F\\approx1\\) places the stage near a feedback/gain null, so a useful inverting gain generally requires \\(g_T R_F>1\\).\n\n### 2. Allocate transconductance to minimize device noise\n\nFor a common-source-equivalent noise estimate, the channel-thermal-noise contribution referred to the input is approximately\n\n\\[\nS_{v,\\mathrm{ch}}\\simeq\n\\frac{4kT\\left(\\gamma_1g_{m1}+\\gamma_2g_{m2}\\right)}\n{\\left(g_{m1}+g_{m2}\\right)^2},\n\\]\n\nwhere \\(\\gamma_1,\\gamma_2\\) are the MOS noise factors. With the total transconductance fixed at approximately \\(20\\) mS, minimize\n\n\\[\n\\gamma_1g_{m1}+\\gamma_2g_{m2}.\n\\]\n\nThus:\n\n- Give more \\(g_m\\) to the device having the lower thermal/flicker-noise coefficient.\n- Include PMOS flicker noise; PMOS devices are often worse at low frequency.\n- Use sufficient device width to reduce \\(1/f\\) noise, while checking its added gate capacitance and bandwidth penalty.\n- Maintain saturation of both transistors.\n\nFor equal long-channel noise factors, the ideal device-noise term is independent of how the \\(20\\) mS is split, so output bias, power, bandwidth, and flicker noise then determine the split.\n\n### 3. Include all actual noise sources\n\nThe final noise figure should be calculated from the complete circuit:\n\n- \\(M_1\\) and \\(M_2\\) channel thermal noise\n- MOS flicker and gate noise\n- Johnson noise of \\(R_F\\), \\(4kT/R_F\\)\n- output-load noise\n- loss noise from \\(C_1\\), if it is lossy\n- parasitic effects from \\(R_F\\), \\(C_{gd}\\), and interconnect\n\nFor source resistance \\(R_s\\), use\n\n\\[\nF(f)=1+\n\\frac{S_{\\mathrm{out,amp}}(f)}\n{4kT R_s\\left|H_{v_s\\rightarrow out}(f)\\right|^2},\n\\]\n\nwhere\n\n\\[\nH_{v_s\\rightarrow out}\n=A_v\\frac{R_{\\mathrm{in}}}{R_s+R_{\\mathrm{in}}}.\n\\]\n\nIf \\(R_s=50~\\Omega\\) and \\(R_{\\mathrm{in}}=50~\\Omega\\), then \\(H=A_v/2\\). The 50-\\(\\Omega\\) source-noise reference at 290 K is \\(4kTR_s=8.28\\times10^{-19}\\ \\mathrm{V^2/Hz}\\).\n\n### 4. Select \\(R_F\\) and \\(C_1\\)\n\nA practical optimization procedure is:\n\n1. Choose the bias currents and \\(W/L\\) values so that \\(g_{m1}+g_{m2}\\) is near \\(20\\) mS.\n2. Sweep \\(R_F\\), recomputing \\(g_T\\) from the exact 50-\\(\\Omega\\) constraint.\n3. For every \\(R_F\\), adjust the NMOS/PMOS current or size to minimize\n   \\[\n   \\gamma_1g_{m1}+\\gamma_2g_{m2}\n   \\]\n   and include \\(R_F\\)'s thermal noise.\n4. Use periodic AC/noise analysis to verify NF, gain, output impedance, and stability over the required band.\n5. Choose \\(C_1\\) so that\n   \\[\n   \\frac{1}{2\\pi f C_1}\\ll 50~\\Omega\n   \\]\n   at the lowest operating frequency. Otherwise the series reactance degrades matching and NF.\n\nThe central result is that a fixed 50-\\(\\Omega\\) input resistance requires approximately **20 mS total transconductance**; the remaining optimization is the noise-optimal allocation of that transconductance, the choice of \\(R_F\\), and inclusion of all resistor, flicker, and parasitic noise. A numerical optimum requires the MOS models, bias point, source/load impedances, and frequency range.",
        "format": "markdown",
        "sha256": "629eaeb9ee46861d2c42165d947f14df1d4a25f79e6939f6c5a14c75f67a96fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The finite-output-resistance input-match relation is correct, but the answer treats total gm as essentially fixed at 20 mS and misses the key optimization: raise gm above 1/Rs while increasing RF to preserve the match, which can reduce NF below 1+gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2827,
        "output_tokens": 46392,
        "total_tokens": 49219,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45209,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2827,
        "output_tokens": 46392,
        "total_tokens": 49219,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 45209,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assuming \\(R_{\\rm in}\\) is the amplifier input resistance and NF is referenced to a \\(50~\\Omega\\) source, there is no unique optimum from the schematic alone. The \\(50~\\Omega\\) input requirement is an impedance-matching constraint; minimum NF additionally requires a noise match, device sizing, bias point, and load.\n\n### 1. Enforce \\(R_{\\rm in}=50~\\Omega\\)\n\nFor the small-signal circuit shown, neglecting gate current and including output conductance\n\n\\[\ng_o=g_{o1}+g_{o2}+G_L,\n\\]\n\nthe effective transconductance of the complementary pair is approximately\n\n\\[\ng_m=g_{m1}+g_{m2}.\n\\]\n\nNodal analysis gives\n\n\\[\nR_{\\rm in}=\\frac{1+g_oR_F}{g_o+g_m}.\n\\]\n\nTherefore the \\(50~\\Omega\\) constraint becomes\n\n\\[\n\\boxed{g_m=\\frac{1+g_oR_F}{50~\\Omega}-g_o}.\n\\]\n\nIf \\(g_oR_F\\ll1\\) and output conductance is small,\n\n\\[\n\\boxed{g_{m1}+g_{m2}\\approx \\frac{1}{50~\\Omega}=20~\\text{mS}}.\n\\]\n\nThus a reasonable starting point is to size and bias \\(M_1\\) and \\(M_2\\) for about \\(20~\\text{mS}\\) total transconductance, then adjust \\(R_F\\) using the exact equation above. Equal splitting, such as \\(g_{m1}=g_{m2}=10~\\text{mS}\\), is only a starting point; PMOS/NMOS noise, headroom, and capacitance usually make the optimum unequal.\n\nAt the operating frequency, include \\(C_{gs},C_{gd},C_{db}\\), and \\(C_1\\), and enforce\n\n\\[\n\\Re\\{Z_{\\rm in}(f_0)\\}=50~\\Omega,\\qquad\n\\Im\\{Z_{\\rm in}(f_0)\\}=0.\n\\]\n\n### 2. Do not confuse impedance matching with noise matching\n\nFor minimum NF, the impedance presented to the source should equal the circuit’s optimum source impedance \\(Z_{\\rm opt}\\), obtained from the complete noise model—including \\(R_F\\)—rather than simply assuming \\(Z_{\\rm opt}=50~\\Omega\\).\n\nA useful first estimate for a MOS common-source core is often\n\n\\[\nR_{\\rm opt}\\sim\\frac{1}{g_{m,\\text{core}}},\n\\]\n\nbut the actual value should be extracted from the process model at the intended bias and frequency. If \\(R_{\\rm opt}\\) differs from \\(50~\\Omega\\), use a lossless matching network or alter the device bias and \\(R_F\\); avoid adding a resistive divider because it adds \\(4kTR\\) noise.\n\n### 3. Include the feedback-resistor and capacitor noise\n\n- \\(R_F\\) contributes Johnson noise \\(4kTR_F\\), referred through its actual transfer function to the input. It can dominate the NF, so \\(R_F\\) must be optimized together with \\(g_m\\), not chosen independently.\n- An ideal \\(C_1\\) adds no thermal noise. Normally choose it so that\n  \\[\n  |X_{C_1}|\\ll 50~\\Omega\n  \\]\n  at the operating frequency, or resonate it with the input/output capacitances.\n- Account explicitly for bias-network noise and all device noise correlations.\n\nThe relevant NF expression is\n\n\\[\nF=1+\n\\frac{\ne_{n,\\rm tot}^{2}\n+R_s^{2}i_{n,\\rm tot}^{2}\n+2R_s\\Re\\{e_n i_n^*\\}\n}{\n4kTR_s\n}.\n\\]\n\n### Recommended optimization procedure\n\nIn the RF/circuit simulator, sweep:\n\n1. \\(M_1,M_2\\) \\(W/L\\) and bias current;\n2. \\(R_F\\);\n3. \\(C_1\\) or the input matching network;\n\nsubject to\n\n\\[\nZ_{\\rm in}(f_0)=50+j0~\\Omega,\n\\]\n\nand select the point with minimum \\(F(f_0)\\), while checking gain, output swing, bandwidth, stability, and process/voltage/temperature corners.\n\n**Bottom line:** use \\(g_{m1}+g_{m2}\\approx20~\\text{mS}\\) as the first-cut condition for the \\(50~\\Omega\\) input resistance, then choose \\(R_F\\), transistor sizes, bias, and \\(C_1\\) through a constrained noise simulation. A numerical optimum cannot be specified without the operating frequency, source and load impedances, bias conditions, and device models.",
        "format": "markdown",
        "sha256": "7b365238fce2df85182877bb6e637c44b50809d388d861073e6271e3058fd09f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The input-resistance equation is equivalent to the finite-output-resistance relation, and the answer correctly notes that RF can be adjusted while sweeping gm. But it misses the key result: raise gm above 1/50 S and increase RF to preserve the match, which lets NF fall below 1+γ. Its bottom line instead centers on gm≈20 mS and generic simulation.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2827,
        "output_tokens": 39884,
        "total_tokens": 42711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2827,
        "output_tokens": 39884,
        "total_tokens": 42711,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 38946,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "A numerical optimum cannot be obtained from the schematic and the 50‑Ω requirement alone. Noise figure depends on frequency, device models, bias current, gain, output loading, and the source impedance used in the NF reference. The correct approach is a **constrained minimization of the total input-referred noise**.\n\n## 1. Use the 50‑Ω source in the NF expression\n\nFor a source resistance \\(R_s=50\\,\\Omega\\),\n\n\\[\nF(f)=1+\\frac{S_{v,n,\\mathrm{in}}(f)}{4kTR_s}\n     =1+\\frac{S_{v,n,\\mathrm{in}}(f)}{200\\,kT}.\n\\]\n\nTherefore, minimizing NF means minimizing the amplifier-added noise referred to the 50‑Ω input, not simply minimizing output noise.\n\n## 2. First-order estimate\n\nLet\n\n\\[\nG_m=g_{m1}+g_{m2}.\n\\]\n\nFor a CMOS inverter with weak feedback, the channel-noise contribution referred to the input is approximately\n\n\\[\nS_{v,n,\\mathrm{ch,in}}\n \\simeq\n4kT\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}\n           {(g_{m1}+g_{m2})^2}.\n\\]\n\nThus,\n\n\\[\nF_{\\mathrm{ch}}\n \\simeq\n1+\n50\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}\n         {(g_{m1}+g_{m2})^2}.\n\\]\n\nThis gives the primary design direction:\n\n- Increase the effective \\(g_m\\), subject to power, bandwidth, and matching limits.\n- For equal channel factors \\(\\gamma_1\\approx\\gamma_2\\), the thermal-noise result depends mainly on \\(g_{m1}+g_{m2}\\), not strongly on their split.\n- Use large, multifinger devices to minimize poly gate resistance; gate-resistance noise can otherwise dominate.\n- Include flicker noise at low frequency and induced-gate noise in the actual optimization.\n\nFor a target noise factor \\(F_t\\), a useful initial sizing constraint is\n\n\\[\n50\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}{G_m^2}\n\\leq F_t-1-F_{\\mathrm{other}},\n\\]\n\nwhere \\(F_{\\mathrm{other}}\\) accounts for feedback-resistor noise, gate noise, flicker noise, etc.\n\n## 3. Enforcing the 50‑Ω input resistance\n\nLet\n\n\\[\ng_F=\\frac1{R_F}, \\qquad\nG_o=g_{o1}+g_{o2}+g_L,\n\\]\n\nwhere \\(g_L\\) is the output-load conductance. At midband, with \\(C_1\\) effectively a short, the closed-loop gain is approximately\n\n\\[\nA_v \\simeq -\\frac{G_m-g_F}{G_o+g_F}.\n\\]\n\nSince the input current is\n\n\\[\ni_{\\mathrm{in}}=\\frac{v_i-v_o}{R_F},\n\\]\n\nthe amplifier input resistance is\n\n\\[\nR_{\\mathrm{in,amp}}\n =\\frac{v_i}{i_{\\mathrm{in}}}\n =\\frac{R_F}{1-A_v}.\n\\]\n\nTherefore, if the requirement is that the amplifier itself present 50 Ω,\n\n\\[\n\\boxed{\\frac{R_F}{1-A_v}=50\\,\\Omega}\n\\]\n\nor equivalently\n\n\\[\nR_F=50(1-A_v).\n\\]\n\nThe gain and transconductance must then satisfy\n\n\\[\nG_m=\\frac1{R_F}\n+|A_v|\\left(G_o+\\frac1{R_F}\\right).\n\\]\n\nThus \\(R_F\\), transistor sizes, and bias are not independent; they must be optimized together under the 50‑Ω constraint.\n\nAt finite frequency, use the complete impedance:\n\n\\[\nZ_{\\mathrm{in,port}}(f)\n = \\frac{1}{j\\omega C_1}+Z_{\\mathrm{in,amp}}(f),\n\\]\n\nincluding gate and parasitic capacitances. If a true 50‑Ω match is required, the target is\n\n\\[\nZ_{\\mathrm{in,port}}=50+j0\\ \\Omega\n\\quad\\Longleftrightarrow\\quad\nS_{11}=0.\n\\]\n\nIn that case, \\(C_1\\) may need to be chosen together with the feedback network to cancel the input reactance.\n\nIf “50 Ω” instead refers to the **source resistance**, use it in the NF equation but do not apply the amplifier-input-resistance constraint above.\n\n## 4. Optimize \\(R_F\\) and \\(C_1\\), not just the transistors\n\nImportant effects are:\n\n- **\\(R_F\\):** Provides feedback and sets part of the input resistance, but also has thermal noise. Its contribution is filtered by the loop gain, so it cannot be judged from \\(4kTR_F\\) alone.\n- **Too little feedback:** Can give insufficient gain and poor input-impedance control.\n- **Too much feedback:** Can reduce gain, alter the noise transfer, and increase sensitivity to the feedback network.\n- **\\(C_1\\):** Should have sufficiently small reactance at the operating frequency. Its ESR or substrate loss must be included if appreciable.\n- **Output load:** Changes the closed-loop gain, input resistance, and RF noise transfer.\n\nTherefore, sweep \\(R_F\\) rather than selecting it from a simple gain formula.\n\n## 5. Recommended practical procedure\n\n1. Specify the target frequency or band, output load, required gain, current/power limit, process, and temperature.\n2. Choose the DC bias and transistor widths/lengths to obtain the required \\(g_{m1}\\) and \\(g_{m2}\\).\n3. For each candidate bias and device size, adjust \\(R_F\\) so that the full \\(Z_{\\mathrm{in}}\\) satisfies the 50‑Ω requirement.\n4. Tune \\(C_1\\) to minimize the residual input reactance.\n5. Perform an AC/noise analysis using a 50‑Ω source and calculate input-referred noise and spot/integrated NF.\n6. Minimize NF over \\(R_F\\), \\(C_1\\), device dimensions, and bias while imposing the 50‑Ω, gain, power, and bandwidth constraints.\n7. Verify the result across process, voltage, and temperature corners.\n\nIn short, keep the 50‑Ω condition fixed and optimize for the **largest practical effective transconductance**, while jointly choosing \\(R_F\\), \\(C_1\\), and the transistor sizes so that feedback-resistor noise, gate resistance, flicker noise, and parasitics are minimized. A unique component value cannot be specified without the frequency, load, gain, bias, and technology information.",
        "format": "markdown",
        "sha256": "9bba0b7539352c3df1d9a0665a8ef8cb1f742dec1b82406d644a0ee6026d99cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer’s input-resistance equations include finite output conductance and show how to retune RF while increasing gm to maintain 50 Ω. Its channel-noise expression shows the resulting noise reduction; the additional practical caveats do not change the essential conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2827,
        "output_tokens": 28158,
        "total_tokens": 30985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2688,
        "input_tokens": 2827,
        "output_tokens": 28158,
        "total_tokens": 30985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Assume the small-signal model with \\(V_{DD}\\) and \\(V_b\\) at ac ground, an ideal \\(I_{SS}\\), and neglecting transistor output resistances, body effect, and parasitic capacitances. \\(M_3\\) is the PMOS shown.\n\nLet \\(v_i=v_P\\), \\(v_o=V_{\\text{out}}\\), and \\(v_x\\) be the voltage at the drain of \\(M_1\\).\n\n### 1. Forward gain\n\nFor \\(M_1\\),\n\n\\[\nv_x=-g_{m1}R_{D1}v_i .\n\\]\n\nThe incremental drain current of \\(M_2\\) is \\(g_{m2}v_x\\). Since the \\(I_{SS}\\) branch is open for small signals, the current supplied by \\(M_3\\) into the output node is\n\n\\[\ni_3=-g_{m2}v_x\n   =g_{m1}g_{m2}R_{D1}v_i .\n\\]\n\nDefine\n\n\\[\nG=g_{m1}g_{m2}R_{D1}.\n\\]\n\nKCL at the output gives\n\n\\[\nGv_i=\\frac{v_o}{R_{D2}}+\\frac{v_o-v_i}{R_F},\n\\]\n\nso\n\n\\[\nA_v\\equiv\\frac{v_o}{v_i}\n=\\frac{G+1/R_F}{1/R_{D2}+1/R_F}.\n\\]\n\nEquivalently, with the open-loop gain\n\n\\[\nA_0=G R_{D2}=g_{m1}g_{m2}R_{D1}R_{D2},\n\\]\n\n\\[\nA_v=\\frac{A_0R_F+R_{D2}}{R_F+R_{D2}}.\n\\]\n\n### 2. Input impedance\n\nThe input current is\n\n\\[\nI_{\\text{in}}\n=sC_{\\text{in}}v_i+\\frac{v_i-v_o}{R_F}.\n\\]\n\nTherefore,\n\n\\[\nY_{\\text{in}}(s)\n=sC_{\\text{in}}+\\frac{1-A_v}{R_F}\n=sC_{\\text{in}}+\\frac{1-A_0}{R_F+R_{D2}}.\n\\]\n\nHence\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)=\n\\frac{R_F+R_{D2}}\n{sC_{\\text{in}}(R_F+R_{D2})\n+1-g_{m1}g_{m2}R_{D1}R_{D2}}\n}\n\\]\n\nor, at dc,\n\n\\[\n\\boxed{\nR_{\\text{in}}=\n\\frac{R_F+R_{D2}}\n{1-g_{m1}g_{m2}R_{D1}R_{D2}}\n}.\n\\]\n\nIf \\(g_{m1}g_{m2}R_{D1}R_{D2}>1\\), the circuit presents a negative input resistance.",
        "format": "markdown",
        "sha256": "121e52181b640f3c3ad0d04a8bf947f268664ee98d41b7f1835bff904b377c18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It accounts for the feedback path and correctly retains the output-side resistance in the numerator, but gets the amplifier polarity wrong. The resulting denominator has 1−A₀ instead of 1+A₀ and predicts negative input resistance, contradicting the central result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 413,
        "output_tokens": 32324,
        "total_tokens": 32737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31773,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 413,
        "output_tokens": 32324,
        "total_tokens": 32737,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31773,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Because \\(M_1\\) is a MOS transistor, its gate draws no current in the small-signal model. Thus the only input current is the current through \\(C_{in}\\):\n\n\\[\nI_{in}(s)=sC_{in}V_{in}.\n\\]\n\nTherefore,\n\n\\[\n\\boxed{Z_{in}(s)=\\frac{V_{in}}{I_{in}}=\\frac{1}{sC_{in}}}\n\\]\n\nor, for sinusoidal signals,\n\n\\[\n\\boxed{Z_{in}(j\\omega)=\\frac{1}{j\\omega C_{in}}\n      =-\\frac{j}{\\omega C_{in}}}.\n\\]\n\nHence the dc input resistance is infinite, while the AC input impedance is purely capacitive. If a finite gate-leakage resistance \\(R_G\\) is included, then\n\n\\[\nZ_{in}=R_G\\parallel \\frac{1}{sC_{in}}.\n\\]",
        "format": "markdown",
        "sha256": "01d171631b37812b40be234707f0c189655f38ab5232dba3206538c67a31c43b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It treats the input as an isolated MOS gate capacitance, missing the feedback resistor and amplifier output resistance. The required input resistance is the Miller result \\((R_F+R_{D2})/(1+A_0)\\), not \\(1/(sC_{in})\\).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 413,
        "output_tokens": 15798,
        "total_tokens": 16211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15620,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 413,
        "output_tokens": 15798,
        "total_tokens": 16211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15620,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "Let \\(v_i=v_P\\), \\(v_x\\) be the drain voltage of \\(M_1\\), and \\(v_o=v_{\\text{out}}\\). Assume the usual small-signal model: the MOS transistors have infinite \\(r_o\\), \\(V_b\\) is an ac ground, and the ideal bias current source has zero incremental current.\n\nSince the gate current of \\(M_1\\) is zero,\n\n\\[\ni_{\\text{in}}(s)=sC_{\\text{in}}v_i+\\frac{v_i-v_o}{R_F}.\n\\]\n\nThus, in the most general form, if\n\n\\[\nG(s)\\equiv \\frac{v_o}{v_i},\n\\]\n\nthen\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)\n=\\left[sC_{\\text{in}}+\\frac{1-G(s)}{R_F}\\right]^{-1}\n}\n\\]\n\n### For the circuit as drawn\n\nInterpreting \\(M_2\\) as diode-connected, with its gate and drain at \\(X\\), and \\(M_2,M_3\\) as the common-source PMOS pair, define\n\n\\[\nk=\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}.\n\\]\n\nSmall-signal analysis gives\n\n\\[\n\\frac{v_x}{v_i}\n=-A_x,\n\\qquad\nA_x=\\frac{g_{m1}}{1/R_{D1}+k}.\n\\]\n\nWith \\(R_F\\) disconnected, the open-loop gain magnitude is\n\n\\[\nA_o=kA_xR_{D2}\n=\n\\boxed{\n\\frac{g_{m1}g_{m2}g_{m3}R_{D1}R_{D2}}\n{g_{m2}+g_{m3}+R_{D1}g_{m2}g_{m3}}\n}.\n\\]\n\nThe output resistance with \\(r_o\\to\\infty\\) is \\(R_{D2}\\). Therefore,\n\n\\[\n\\boxed{\nZ_{\\text{in}}(s)=\n\\frac{R_F+R_{D2}}\n{1+A_o+s(R_F+R_{D2})C_{\\text{in}}}\n}\n\\]\n\nand the dc input resistance is\n\n\\[\n\\boxed{\nR_{\\text{in}}\n=\n\\frac{R_F+R_{D2}}\n{1+\n\\dfrac{g_{m1}g_{m2}g_{m3}R_{D1}R_{D2}}\n{g_{m2}+g_{m3}+R_{D1}g_{m2}g_{m3}}\n}\n}.\n\\]\n\nIf \\(R_F\\gg R_{D2}\\), this reduces to the commonly used feedback result\n\n\\[\nZ_{\\text{in}}(s)\\approx\n\\frac{R_F}{1+A_o+sR_FC_{\\text{in}}}.\n\\]\n\nA numerical value cannot be obtained without the transistor \\(g_m\\)'s and bias information.",
        "format": "markdown",
        "sha256": "29f00db5c29beda1947f628c322cfa212d8074ae0687fa506e78aaba5713536a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly derives the Miller input-impedance form and retains the exact RF + RD2 term. However, its Ao adds a k-dependent loading term at RD1, so it does not match the circuit’s specified unloaded gain A0 = 1/2 gm1 gm2,3 RD1 RD2. That gain error can materially change the result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 413,
        "output_tokens": 79639,
        "total_tokens": 80052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 79082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 128,
        "input_tokens": 413,
        "output_tokens": 79639,
        "total_tokens": 80052,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 79082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The LDO noise does not directly add to the oscillator’s tank noise; it first modulates the VCO supply, which produces a frequency perturbation and therefore phase noise.\n\nLet the noise voltage at the LDO output be \\(v_n(t)\\). If \\(S_{\\mathrm{th}}\\) is internal LDO noise, the output noise is\n\n\\[\nS_{v_n}(f)=|H_{\\mathrm{LDO}}(f)|^2 S_{\\mathrm{th}}(f),\n\\]\n\nwhere \\(H_{\\mathrm{LDO}}\\) includes the regulator noise gain, PSRR, and output filtering. If \\(S_{\\mathrm{th}}\\) is already specified at \\(V_{\\mathrm{out}}\\), then \\(H_{\\mathrm{LDO}}=1\\).\n\n### Supply-to-frequency sensitivity\n\nLinearize the free-running oscillator frequency around its nominal value:\n\n\\[\nf_{\\mathrm{osc}}(V_{\\mathrm{out}})\n \\simeq f_0+K_f v_n(t),\n\\qquad\nK_f=\\frac{\\partial f_0}{\\partial V_{\\mathrm{out}}}\n\\quad [\\mathrm{Hz/V}].\n\\]\n\nThe oscillator phase satisfies\n\n\\[\n\\frac{d\\phi}{dt}=2\\pi\\left(f_{\\mathrm{osc}}-f_0\\right)\n              =2\\pi K_f v_n(t).\n\\]\n\nThus, at offset frequency \\(f\\),\n\n\\[\nH_{\\phi v}(f)=\\frac{K_f}{jf}.\n\\]\n\nTherefore, the LDO-induced phase-noise PSD is\n\n\\[\n\\boxed{\nS_{\\phi,\\mathrm{LDO}}(f)\n=\n\\left|\\frac{K_f}{f}\\right|^2\n|H_{\\mathrm{LDO}}(f)|^2 S_{\\mathrm{th}}(f)\n}\n\\]\n\nwhere the phase PSD is in \\(\\mathrm{rad^2/Hz}\\). Equivalently, using\n\n\\[\nK_\\omega=\\frac{\\partial \\omega_0}{\\partial V_{\\mathrm{out}}}\n\\quad [\\mathrm{rad\\,s^{-1}/V}],\n\\]\n\ngives\n\n\\[\nS_{\\phi,\\mathrm{LDO}}(f)\n=\n\\left|\\frac{K_\\omega}{2\\pi f}\\right|^2 S_{v_n}(f).\n\\]\n\nFor one-sided PSDs, the corresponding single-sideband phase noise is\n\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(f)\n=\n10\\log_{10}\\!\\left[\n\\frac12\n\\left|\\frac{K_f}{f}\\right|^2\n|H_{\\mathrm{LDO}}(f)|^2\nS_{\\mathrm{th}}(f)\n\\right]\n\\ \\mathrm{dBc/Hz}\n}\n\\]\n\nwith the factor of two adjusted if a two-sided PSD convention is used. For white thermal noise, this contribution falls as \\(1/f^2\\), i.e. \\(-20\\ \\mathrm{dB/decade}\\).\n\nThe total VCO phase noise is obtained by adding uncorrelated PSDs:\n\n\\[\nS_{\\phi,\\mathrm{total}}\n=\nS_{\\phi,\\mathrm{intrinsic}}\n+\nS_{\\phi,\\mathrm{LDO}},\n\\]\n\nor, in dB, by adding their linear powers.\n\n### Obtaining \\(K_f\\)\n\nIt can be found by:\n\n- sweeping \\(V_{\\mathrm{out}}\\) in a harmonic-balance or phase-domain simulation and differentiating \\(f_0(V_{\\mathrm{out}})\\);\n- measuring the instantaneous frequency after a small supply step;\n- injecting a small sinusoidal supply perturbation and measuring \\(\\Delta\\phi/\\Delta V_{\\mathrm{out}}\\).\n\nA first-order LC estimate is\n\n\\[\nK_f \\simeq\n-\\frac{f_0}{2C_{\\mathrm{eff}}}\n\\frac{\\partial C_{\\mathrm{eff}}}{\\partial V_{\\mathrm{out}}},\n\\]\n\nincluding changes in parasitic capacitance and transistor bias.\n\nImportantly, \\(S_{\\mathrm{th}}\\) alone is not sufficient. In a perfectly symmetric differential LC VCO, common-mode supply noise may produce only AM and no differential phase shift, so \\(K_f\\) can be nearly zero. Real phase-noise contribution comes from nonlinear conversion, tank pulling, bias-dependent capacitance, and circuit mismatch.",
        "format": "markdown",
        "sha256": "2f68f64f4f41ace59fa1f9fb7950f3151f4a9ff703510ed9f90a82e3b08f7a7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly derives supply-noise-to-frequency sensitivity and the resulting 1/offset-frequency-squared phase-noise conversion. It omits the circuit-specific point that the supply perturbation acts directly on the varactors, making the pushing sensitivity closely related to KVCO, and its symmetry caveat could mislead for this circuit.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 3255,
        "output_tokens": 14625,
        "total_tokens": 17880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 3255,
        "output_tokens": 14625,
        "total_tokens": 17880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "\\(S_{\\mathrm{th}}\\) alone is not sufficient; the LDO output noise must be converted through the VCO’s supply-to-frequency or supply-to-phase sensitivity.\n\n### 1. Convert supply noise to frequency noise\n\nLet the LDO output noise be\n\n\\[\nv_{\\mathrm{out}}(t)=V_{\\mathrm{DD}}+n(t),\n\\qquad S_n(f_m)=S_{\\mathrm{th}}(f_m),\n\\]\n\nwhere \\(f_m\\) is the offset frequency from the carrier.\n\nDefine the VCO supply-pushing coefficient\n\n\\[\nK_f=\\left.\\frac{\\partial f_{\\mathrm{osc}}}{\\partial V_{\\mathrm{out}}}\\right|_{V_{\\mathrm{DD}}}\n\\quad [\\mathrm{Hz/V}].\n\\]\n\nThe resulting frequency-noise PSD is\n\n\\[\nS_{f}(f_m)=K_f^2 S_{\\mathrm{th}}(f_m).\n\\]\n\n\\(K_f\\) can be obtained from a supply-pushing simulation or measurement,\n\n\\[\nK_f \\approx\n\\frac{f_{\\mathrm{osc}}(V_{\\mathrm{DD}}+\\Delta V)\n-f_{\\mathrm{osc}}(V_{\\mathrm{DD}}-\\Delta V)}\n{2\\Delta V},\n\\]\n\nincluding the dependence of the tank, transistor parasitics, and bias current on \\(V_{\\mathrm{DD}}\\).\n\n### 2. Convert frequency noise to phase noise\n\nFor a free-running oscillator,\n\n\\[\n\\frac{d\\phi}{dt}=2\\pi f_0+2\\pi K_f n(t),\n\\]\n\nso the supply-to-phase transfer function is an integrator:\n\n\\[\nH_{\\phi n}(s)=\\frac{2\\pi K_f}{s}.\n\\]\n\nConsequently, at offset \\(f_m\\),\n\n\\[\nS_{\\phi,\\mathrm{LDO}}(f_m)\n=\n\\left|\\frac{2\\pi K_f}{j2\\pi f_m}\\right|^2 S_{\\mathrm{th}}(f_m)\n=\n\\left(\\frac{K_f}{f_m}\\right)^2S_{\\mathrm{th}}(f_m).\n\\]\n\nThis is the one-sided phase-noise PSD in \\(\\mathrm{rad^2/Hz}\\). The conventional single-sideband phase noise is then\n\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(f_m)\n=\n10\\log_{10}\n\\left[\n\\frac{1}{2}\n\\left(\\frac{K_f}{f_m}\\right)^2\nS_{\\mathrm{th}}(f_m)\n\\right]\n\\quad \\mathrm{dBc/Hz}\n}\n\\]\n\nassuming \\(S_{\\mathrm{th}}\\) is a one-sided, output-referred voltage-noise PSD in \\(\\mathrm{V^2/Hz}\\). If \\(S_{\\mathrm{th}}\\) is specified as a two-sided PSD, the factor \\(1/2\\) is omitted.\n\nFor white LDO noise and constant \\(K_f\\), this contribution falls as \\(1/f_m^2\\), or \\(-20\\ \\mathrm{dB/decade}\\).\n\n### 3. Add it to the intrinsic VCO noise\n\nThe total output phase noise is obtained by adding uncorrelated noise PSDs:\n\n\\[\nS_{\\phi,\\mathrm{tot}}\n=\nS_{\\phi,\\mathrm{intrinsic}}\n+\nS_{\\phi,\\mathrm{LDO}},\n\\]\n\nor equivalently,\n\n\\[\n\\mathcal L_{\\mathrm{tot}}\n=\n10\\log_{10}\n\\left(\n10^{\\mathcal L_{\\mathrm{intrinsic}}/10}\n+\n10^{\\mathcal L_{\\mathrm{LDO}}/10}\n\\right).\n\\]\n\n### Important observation for this circuit\n\nThe LDO noise is common-mode to both \\(L_1\\) branches. For an ideal symmetric differential LC oscillator,\n\n\\[\nL_1\\frac{d(i_X-i_Y)}{dt}=-(v_X-v_Y),\n\\]\n\nso the common \\(V_{\\mathrm{out}}\\) noise cancels from the differential-mode equation. Therefore, if \\(L_1\\), the effective tank capacitance, bias, and devices are truly independent of \\(V_{\\mathrm{out}}\\),\n\n\\[\nK_f \\approx 0,\n\\]\n\nand the LDO thermal noise produces no first-order differential phase noise; it mainly appears as common-mode/AM noise.\n\nIn a real circuit, \\(K_f\\neq0\\) because of supply-dependent transistor capacitances, bias current, tank loss, varactor/reference coupling, component mismatch, and common-mode-to-phase conversion. These effects should be included when extracting \\(K_f\\), or the complete supply-to-phase transfer function\n\n\\[\nH_{\\phi v}(s)=K_{\\mathrm{pm}}+\\frac{2\\pi K_f}{s},\n\\]\n\ncan be used directly:\n\n\\[\nS_{\\phi,\\mathrm{LDO}}(f_m)\n=\n|H_{\\phi v}(j2\\pi f_m)|^2S_{\\mathrm{th}}(f_m).\n\\]\n\nThus, a numerical phase-noise result cannot be obtained from \\(S_{\\mathrm{th}}\\) and the schematic alone; the measured or simulated VCO supply sensitivity is also required.",
        "format": "markdown",
        "sha256": "ea4fdba9d139ca15a8943e03a856fb182e8edcdb0746dbacebf948cfe390a898"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly converts LDO noise through supply-pushing sensitivity and the 1/offset² FM-to-phase relation. However, it misses the key circuit-specific point that the supply perturbation directly affects the varactors, making Kpush closely related to KVCO; its common-mode cancellation discussion risks understating that mechanism.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3254,
        "input_tokens": 3255,
        "output_tokens": 14353,
        "total_tokens": 17608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3254,
        "input_tokens": 3255,
        "output_tokens": 14353,
        "total_tokens": 17608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The LDO noise must first be converted into oscillator phase perturbation. \\(S_{\\mathrm{th}}\\) alone is not sufficient; one also needs the VCO’s sensitivity to the LDO output voltage.\n\nLet the LDO output-noise voltage be \\(v_n(t)\\), with PSD \\(S_{\\mathrm{th}}(f)\\). For a simple frequency-pulling model,\n\n\\[\n\\omega_{\\mathrm{inst}}(t)=\\omega_0+K_\\omega v_n(t),\n\\qquad\nK_\\omega=\\frac{\\partial \\omega_0}{\\partial V_{\\mathrm{out}}}\n=2\\pi K_f,\n\\]\n\nwhere\n\n\\[\nK_f=\\frac{\\partial f_0}{\\partial V_{\\mathrm{out}}}\n\\]\n\nis the oscillator frequency sensitivity in Hz/V. The phase perturbation is\n\n\\[\n\\phi(t)=\\int K_\\omega v_n(t)\\,dt,\n\\]\n\nso the phase-noise transfer function is\n\n\\[\nH_{\\phi v}(s)=\\frac{K_\\omega}{s}.\n\\]\n\nTherefore, using a two-sided PSD,\n\n\\[\nS_{\\phi,\\mathrm{out},2}(\\Delta f)\n=\n\\left|\\frac{K_\\omega}{j2\\pi\\Delta f}\\right|^2\nS_{\\mathrm{th},2}(\\Delta f).\n\\]\n\nThe conventional single-sideband phase noise is\n\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(\\Delta f)\n=\n\\frac{K_f^2}{2(\\Delta f)^2}S_{\\mathrm{th},1}(\\Delta f)\n}\n\\qquad\\text{dBc/Hz},\n\\]\n\nif \\(S_{\\mathrm{th},1}\\) is a one-sided PSD. If \\(S_{\\mathrm{th}}\\) is two-sided, the equivalent expression is\n\n\\[\n\\boxed{\n\\mathcal L_{\\mathrm{LDO}}(\\Delta f)\n=\n\\frac{K_f^2}{(\\Delta f)^2}S_{\\mathrm{th},2}(\\Delta f)\n}.\n\\]\n\nFor white LDO noise, this contribution falls as \\(1/\\Delta f^2\\), or \\(-20\\) dB/decade.\n\n### Obtaining \\(K_f\\) for the shown oscillator\n\nFor a simplified LC tank,\n\n\\[\nf_0\\simeq \\frac{1}{2\\pi\\sqrt{L_{\\mathrm{eff}}C_{\\mathrm{eff}}}},\n\\]\n\nhence\n\n\\[\nK_f=\n-\\frac{f_0}{2}\n\\left[\n\\frac{1}{L_{\\mathrm{eff}}}\\frac{\\partial L_{\\mathrm{eff}}}{\\partial V_{\\mathrm{out}}}\n+\n\\frac{1}{C_{\\mathrm{eff}}}\\frac{\\partial C_{\\mathrm{eff}}}{\\partial V_{\\mathrm{out}}}\n\\right].\n\\]\n\nMore accurately, \\(K_f\\) can be extracted from a periodic steady-state or harmonic-balance simulation by changing \\(V_{\\mathrm{out}}\\) by a small amount and measuring the change in oscillation frequency.\n\n### Important AM-to-PM issue\n\nBecause \\(V_{\\mathrm{out}}\\) primarily supplies the tank in this figure, LDO noise may initially change the oscillator amplitude rather than its frequency. In a perfectly symmetric ideal LC oscillator, \\(K_f\\approx0\\), so there is no first-order phase noise. In a real circuit, imbalance and nonlinearities convert this amplitude noise into phase noise. The general expression is therefore\n\n\\[\n\\mathcal L_{\\mathrm{out}}(\\Delta f)\n=\n\\frac12\n\\left|\nH_{\\phi v}(j2\\pi\\Delta f)\n\\right|^2\nS_{\\mathrm{th},1}(\\Delta f),\n\\]\n\nwhere \\(H_{\\phi v}\\) must include both direct frequency pulling and AM-to-PM conversion.\n\nFor the most accurate result, model the LDO output noise explicitly and run a periodic-noise analysis (PSS followed by PNOISE) of the complete LDO–VCO circuit. The total phase noise is then the sum in linear power of the intrinsic oscillator noise and the LDO-coupled noise.",
        "format": "markdown",
        "sha256": "0ab9bcf59cd5a0cee51985a8edc214c2837598a4566c706604fc432d5de8f3e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies supply pushing and gives the expected frequency-to-phase conversion with the 1/Δf² dependence. However, it misses the circuit-specific point that the supply perturbation acts directly on the varactors and adds a potentially misleading claim that the effect is primarily AM-to-PM or that Kf is near zero.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3254,
        "input_tokens": 3255,
        "output_tokens": 14243,
        "total_tokens": 17498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3254,
        "input_tokens": 3255,
        "output_tokens": 14243,
        "total_tokens": 17498,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "**For the useful differential oscillation, the phase noise is essentially unchanged in the ideal symmetric circuit.**\n\nFor differential-mode operation,\n\n\\[\nv_X=-v_Y,\\qquad v_P=0\n\\]\n\nbecause the common-source (tail) node \\(P\\) is an **AC virtual ground**. Therefore,\n\n\\[\ni_{C_T}=C_T\\frac{dv_P}{dt}=0.\n\\]\n\nThus \\(C_T\\) does not load the differential tank or change its differential negative resistance, oscillation frequency, or \\(Q\\). Consequently, the differential phase noise arising from the drain-current noise of \\(M_1,M_2\\) is unchanged to first order.\n\nWhat \\(C_T\\) does affect is the **common-mode mode**:\n\n- It provides an AC return at the tail node.\n- It lowers the tail impedance and shifts/damps common-mode resonances.\n- It can suppress common-mode oscillations and reduce common-mode spurs.\n- Tail-current-source noise is primarily common-mode, so it is not directly converted into differential phase noise in an ideally matched circuit.\n\nIn a real circuit, mismatch and nonlinearities can convert common-mode variations into differential phase noise. Hence the measured phase noise may improve—or sometimes worsen—if \\(C_T\\) resonates with parasitic inductance or capacitance—but there is no general improvement guaranteed merely by adding \\(C_T\\). For a truly differential output, the first-order result is **no significant change in differential phase noise**.",
        "format": "markdown",
        "sha256": "efe2e16474f933f5fa07e790a42588af0fe4146118304d235f5638df19f6572d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the tail node as an AC virtual ground and concludes that phase noise is essentially unchanged. It misses the nonmonotonic effect, including class-C improvement and possible flicker-noise upconversion or large-CT instability, though it shows some relevant common-mode reasoning.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 4041,
        "output_tokens": 11122,
        "total_tokens": 15163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10839,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 4041,
        "output_tokens": 11122,
        "total_tokens": 15163,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10839,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "The effect depends on which noise contribution dominates.\n\n### Differential-mode oscillator\n\nThe tail node \\(P\\) is a **virtual ground for the differential oscillation**: the source currents of \\(M_1\\) and \\(M_2\\) cancel in differential mode. Therefore, an ideal \\(C_T\\) does not appreciably change:\n\n- the differential resonant frequency,\n- the differential tank \\(Q\\),\n- the intrinsic drain-noise/Leeson phase noise of \\(M_1\\) and \\(M_2\\).\n\nThus, adding \\(C_T\\) alone does not lower the fundamental phase-noise floor of the LC tank.\n\n### Tail-current-source noise\n\nThe main intended benefit is filtering noise from the tail current source \\(I_{SS}\\). If \\(R_T\\) is the effective small-signal resistance seen at the tail, \\(R_T\\) and \\(C_T\\) form a pole\n\n\\[\nf_{p,T}\\simeq \\frac{1}{2\\pi R_T C_T}.\n\\]\n\nApproximately, the noise-current component that reaches the oscillator is filtered by\n\n\\[\n\\frac{i_{n,\\text{core}}}{i_{n,T}}\n\\simeq\n\\frac{1}{1+j(2\\pi \\Delta f)R_TC_T}.\n\\]\n\nConsequently:\n\n- For \\(\\Delta f\\ll f_{p,T}\\), little or no filtering occurs.\n- For \\(\\Delta f\\gg f_{p,T}\\), tail-current-source noise is shunted to ground, reducing the AM-to-PM/common-mode-to-differential conversion and therefore reducing phase noise in that offset range.\n- Close-in \\(1/f\\) noise from the tail device is generally **not** removed by \\(C_T\\).\n\nIn a perfectly symmetric ideal oscillator, tail-current-source noise is purely common mode and would not directly generate differential phase noise. The improvement in practice comes from imperfect symmetry and nonlinear conversion mechanisms.\n\nSo the practical conclusion is:\n\n> \\(C_T\\) can lower phase noise by filtering tail-bias noise at moderate/large offset frequencies, but it does not improve the intrinsic differential LC oscillator noise or necessarily improve close-in phase noise.\n\nA poorly chosen \\(C_T\\) can also create a common-mode resonance with \\(L_1,L_2\\) and parasitic capacitances, potentially adding spurs or degrading phase noise, so the common-mode response should be checked.",
        "format": "markdown",
        "sha256": "fdc2ad2dd87a194a32973334f6ad2ad0e7239f32e7e9f28b073010a7dd9e7cf5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It predicts tail-noise filtering as a phase-noise benefit and mentions a generic possible degradation from common-mode resonance, but misses the key nonmonotonic mechanisms: flicker-noise upconversion, class-C peak currents above ISS, and/or large-CT instability.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4040,
        "input_tokens": 4041,
        "output_tokens": 13821,
        "total_tokens": 17862,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4040,
        "input_tokens": 4041,
        "output_tokens": 13821,
        "total_tokens": 17862,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13356,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "### Short answer\n\nFor an ideal, perfectly symmetric differential LC oscillator, adding \\(C_T\\) at the common-source/tail node does **not appreciably change the intrinsic differential phase-noise floor**. It is not a differential tank capacitor.\n\nLet \\(v_P\\) be the tail-node voltage. In differential mode,\n\n\\[\ni_{d1}-i_{d2}\n=g_m\\!\\left[(v_{g1}-v_P)-(v_{g2}-v_P)\\right]\n=g_m(v_{g1}-v_{g2}).\n\\]\n\nThe common tail voltage cancels, so neither \\(C_T\\) nor the tail impedance appears in the differential-mode loop equation. Consequently, ideally:\n\n- \\(f_0\\) is essentially unchanged.\n- The differential tank \\(Q\\) is unchanged.\n- The direct tank/MOS white phase-noise term is unchanged.\n- \\(C_T\\) adds no noise if it is ideal.\n\n### Practical effect\n\nThe tail node is a common-mode node. \\(C_T\\) makes its impedance smaller:\n\n\\[\nZ_P(\\omega)=Z_{\\text{tail}}(\\omega)\\parallel \\frac{1}{j\\omega C_T},\n\\]\n\nso tail-current-source noise and source-node fluctuations are shunted more strongly. This can reduce measured phase noise in a real oscillator by suppressing common-mode-to-phase conversion caused by mismatch and nonlinear AM–PM effects. It can also damp parasitic common-mode resonances.\n\nThus:\n\n> **Ideal differential phase noise: essentially unchanged.  \n> Real-world bias/common-mode-related phase noise: can improve.**\n\nIt does not remove intrinsic tank noise or MOS flicker noise. At very small offset frequencies, \\(X_{C_T}\\) is large, so suppression of close-in bias noise is weak. Excessively lossy or parasitically resonant \\(C_T\\) can also introduce unwanted common-mode behavior.",
        "format": "markdown",
        "sha256": "89749f614d9d730de74fd457ec0bea69b1311942684304d0742c6a0a363fac8a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misses the central nonmonotonic effect and incorrectly treats the tail voltage as canceling from the oscillator’s relevant behavior. Tail-noise filtering is a real secondary effect, but it omits class-C current enhancement and the possible flicker-noise upconversion, triode operation, or large-\u0000CT instability.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4040,
        "input_tokens": 4041,
        "output_tokens": 12529,
        "total_tokens": 16570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12161,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 4040,
        "input_tokens": 4041,
        "output_tokens": 12529,
        "total_tokens": 16570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12161,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "A numerical frequency cannot be determined from the schematic alone because no capacitance or device parameters are given. However, the cross-coupled sections behave approximately as LC oscillators.\n\nFor a balanced differential oscillation, take \\(V_{DD}\\) as an AC ground. Each tank half consists of:\n\n- one inductor \\(L\\), and\n- the total capacitance \\(C_{\\mathrm{eff}}\\) at the corresponding \\(X\\) or \\(Y\\) node.\n\nThe cross-coupled transistors provide negative conductance to cancel the tank loss. The resonance condition is\n\n\\[\n\\omega_{\\mathrm{osc}}C_{\\mathrm{eff}}\n   \\approx \\frac{1}{\\omega_{\\mathrm{osc}}L},\n\\]\n\nso\n\n\\[\n\\boxed{f_{\\mathrm{osc}}\\approx\n       \\frac{1}{2\\pi\\sqrt{L\\,C_{\\mathrm{eff}}}}}\n\\]\n\nFor the two sections,\n\n\\[\nf_{01}\\approx \\frac{1}{2\\pi\\sqrt{L_1C_{\\mathrm{eff},1}}},\n\\qquad\nf_{02}\\approx \\frac{1}{2\\pi\\sqrt{L_2C_{\\mathrm{eff},2}}}.\n\\]\n\nIf all inductors and node capacitances are equal, the two sections resonate at the same frequency and may injection-lock.\n\nHere \\(C_{\\mathrm{eff}}\\) should include the transistor drain and gate capacitances, any load capacitance, package/interconnect capacitance, and the inductors’ self-capacitance:\n\n\\[\nC_{\\mathrm{eff}}\\approx\nC_{\\mathrm{load}}+C_{db}+C_{gd}+C_{gs,\\mathrm{Miller}}\n+C_{\\mathrm{wire}}+C_{\\mathrm{coil}}.\n\\]\n\nThe currents \\(I_{SS}\\) and \\(I_1\\) mainly determine the negative conductance and oscillation amplitude, rather than the resonant frequency. For scale, \\(L=1\\,\\text{nH}\\) and \\(C_{\\mathrm{eff}}=100\\,\\text{fF}\\) would give approximately \\(15.9\\,\\text{GHz}\\). If all parasitic capacitances are intentionally excluded, the ideal circuit has no well-defined finite oscillation frequency.",
        "format": "markdown",
        "sha256": "22b446dea1fc8b224d006a1054e2b73ab64c24b7fe303c8ad381f433ce196d60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly gives the LC tank resonance as a baseline, but misses the essential coupling-induced frequency shift, and incorrectly implies the bias currents affect amplitude rather than the oscillation-frequency estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2191,
        "output_tokens": 18094,
        "total_tokens": 20285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 197,
        "input_tokens": 2191,
        "output_tokens": 18094,
        "total_tokens": 20285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17674,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "A numerical frequency cannot be obtained from the schematic alone because the inductance and, more importantly, the tank capacitance are not specified. The capacitance is normally the sum of the MOS drain capacitances, \\(C_{gd}\\), wiring, and any intentional load capacitance.\n\nAssume:\n\n- the supply rail is an AC ground,\n- each inductor has inductance \\(L\\),\n- \\(C_{\\mathrm{eq}}\\) is the effective capacitance from either an \\(X\\) or \\(Y\\) output node to AC ground.\n\nFor a differential oscillation, \\(v_X=-v_Y\\), and the differential-mode admittance of each LC load is\n\n\\[\nY_d(j\\omega)=\\frac{1}{j\\omega L}+j\\omega C_{\\mathrm{eq}}.\n\\]\n\nThe oscillation occurs near the parallel-resonance condition, where the reactive part vanishes:\n\n\\[\n\\omega_{\\mathrm{osc}}C_{\\mathrm{eq}}\n=\\frac{1}{\\omega_{\\mathrm{osc}}L}.\n\\]\n\nHence\n\n\\[\n\\boxed{f_{\\mathrm{osc}}\\approx\n\\frac{1}{2\\pi\\sqrt{L C_{\\mathrm{eq}}}}}\n\\]\n\nfor matched upper and lower tanks. Equivalently, using full differential-mode values, \\(L_d=2L\\) and \\(C_d=C_{\\mathrm{eq}}/2\\), which gives the same result.\n\nThe transistor transconductances set by \\(I_{SS}\\) and \\(I_1\\) mainly determine negative resistance, startup, and amplitude; they cause only a small shift from the ideal tank frequency. If each output node has approximately two drain capacitances \\(C_D\\), then a rough estimate is \\(C_{\\mathrm{eq}}\\approx2C_D\\), giving\n\n\\[\nf_{\\mathrm{osc}}\\approx \\frac{1}{2\\pi\\sqrt{2LC_D}}.\n\\]\n\nWith ideal zero-capacitance transistors, the circuit would have no well-defined finite oscillation frequency.",
        "format": "markdown",
        "sha256": "f61cc387ee8e00fed49dfd91cd0cfc9836f686f35ccb78e46e9297b4ef1aa4b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly gives the uncoupled LC tank frequency and notes that transistor coupling shifts it, but omits the essential shift estimate \u001b[?alpha\u001b[0m\u001b[?omega_0/(2Q)\u001b[? or an equivalent expression. Thus it does not fully estimate the circuit's oscillation frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2190,
        "input_tokens": 2191,
        "output_tokens": 22560,
        "total_tokens": 24751,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22188,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2190,
        "input_tokens": 2191,
        "output_tokens": 22560,
        "total_tokens": 24751,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22188,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "MiniMax-M3.1-Flash",
        "route": "minimax_chat_completions"
      },
      "answer": {
        "text": "A numerical frequency cannot be obtained from the schematic alone because the inductor values and device capacitances are not given. However, the usual first-order estimate follows from the LC tanks.\n\nWith \\(V_{DD}\\) treated as AC ground, each inductor resonates with the effective capacitance at its output node:\n\n\\[\nC_{\\mathrm{eq}}=C_{\\text{drain}}+C_{\\text{gate of next stage}}+C_{\\text{wiring}}+\\cdots\n\\]\n\nHence the nominal resonant frequency is\n\n\\[\n\\boxed{f_0 \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_{\\mathrm{eq}}}}}\n\\]\n\nThe same estimate applies to \\(Y_1,X_2,Y_2\\) if all four inductors and their loads are identical. The cross-coupled devices provide the negative resistance needed to sustain the oscillation; the bias currents \\(I_{SS}\\) and \\(I_1\\) mainly determine the loop gain and startup condition rather than the ideal resonant frequency.\n\nThe actual frequency will be close to this value only if the LC resonance dominates. Otherwise, for a delay-dominated four-stage ring interpretation, a rough alternative is\n\n\\[\nf_{\\mathrm{osc}}\\approx \\frac{1}{2N t_{pd}}\n=\\frac{1}{8t_{pd}},\\qquad N=4.\n\\]\n\nThus, a practical estimate requires \\(L\\), the effective output capacitance (usually obtained from the transistor models), and the stage delay. A transient SPICE simulation followed by an FFT of the steady-state waveform will give the actual oscillation frequency.",
        "format": "markdown",
        "sha256": "86deeba2be51102c238de920c2c5674672f9cec3a462bf3d8db78d2b3ce82e55"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the tank resonance as the baseline and the cross-coupled devices' sustaining role, but omits the essential coupling-induced frequency shift (proportional to coupling strength and inversely to Q). The delay-dominated ring alternative does not supply that missing estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2190,
        "input_tokens": 2191,
        "output_tokens": 19812,
        "total_tokens": 22003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2190,
        "input_tokens": 2191,
        "output_tokens": 19812,
        "total_tokens": 22003,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19504,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
