{
  "model_key": "mistral_medium_35",
  "display_name": "Mistral Medium 3.5",
  "provider": "mistral",
  "evaluation_model_ids": [],
  "thinking_effort": "high",
  "configuration_note": "Mistral Medium 3.5 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (mistralai/mistral-medium-3-5) at reasoning effort high, the highest it offers. Requests set max_tokens to 209,715, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Mistral Medium 3.5 on 2026-11-10 ($1.50 input, $1.50 cached input, $7.50 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 27,
          "incorrect_count": 123,
          "partial_credit_count": 65,
          "zero_count": 58,
          "mean_score_0_to_4": 1.46,
          "score_percent": 36.5,
          "score_distribution": {
            "0": 58,
            "1": 35,
            "2": 14,
            "3": 16,
            "4": 27
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 27,
          "incorrect_count": 123,
          "partial_credit_count": 65,
          "zero_count": 58,
          "mean_score_0_to_4": 1.46,
          "score_percent": 36.5,
          "score_distribution": {
            "0": 58,
            "1": 35,
            "2": 14,
            "3": 16,
            "4": 27
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 22,
          "incorrect_count": 68,
          "partial_credit_count": 23,
          "zero_count": 45,
          "mean_score_0_to_4": 1.3888888888888888,
          "score_percent": 34.72222222222222,
          "score_distribution": {
            "0": 45,
            "1": 16,
            "3": 7,
            "4": 22
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 22,
          "incorrect_count": 68,
          "partial_credit_count": 23,
          "zero_count": 45,
          "mean_score_0_to_4": 1.3888888888888888,
          "score_percent": 34.72222222222222,
          "score_distribution": {
            "0": 45,
            "1": 16,
            "3": 7,
            "4": 22
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 5,
          "incorrect_count": 55,
          "partial_credit_count": 42,
          "zero_count": 13,
          "mean_score_0_to_4": 1.5666666666666667,
          "score_percent": 39.166666666666664,
          "score_distribution": {
            "0": 13,
            "1": 19,
            "2": 14,
            "3": 9,
            "4": 5
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 5,
          "incorrect_count": 55,
          "partial_credit_count": 42,
          "zero_count": 13,
          "mean_score_0_to_4": 1.5666666666666667,
          "score_percent": 39.166666666666664,
          "score_distribution": {
            "0": 13,
            "1": 19,
            "2": 14,
            "3": 9,
            "4": 5
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 9,
        "incorrect_count": 41,
        "partial_credit_count": 20,
        "zero_count": 21,
        "mean_score_0_to_4": 1.44,
        "score_percent": 36.0,
        "score_distribution": {
          "0": 21,
          "1": 9,
          "2": 6,
          "3": 5,
          "4": 9
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 8,
        "incorrect_count": 42,
        "partial_credit_count": 22,
        "zero_count": 20,
        "mean_score_0_to_4": 1.34,
        "score_percent": 33.5,
        "score_distribution": {
          "0": 20,
          "1": 13,
          "2": 5,
          "3": 4,
          "4": 8
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 10,
        "incorrect_count": 40,
        "partial_credit_count": 23,
        "zero_count": 17,
        "mean_score_0_to_4": 1.6,
        "score_percent": 40.0,
        "score_distribution": {
          "0": 17,
          "1": 13,
          "2": 3,
          "3": 7,
          "4": 10
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 66560,
        "input_tokens": 246681,
        "output_tokens": 986559,
        "total_tokens": 1233240
      },
      "known_totals": {
        "cached_input_tokens": 66560,
        "input_tokens": 246681,
        "output_tokens": 986559,
        "total_tokens": 1233240
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 7,
          "incorrect_count": 23,
          "partial_credit_count": 7,
          "zero_count": 16,
          "mean_score_0_to_4": 1.3666666666666667,
          "score_percent": 34.166666666666664,
          "score_distribution": {
            "0": 16,
            "1": 4,
            "3": 3,
            "4": 7
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 7,
          "incorrect_count": 23,
          "partial_credit_count": 7,
          "zero_count": 16,
          "mean_score_0_to_4": 1.1666666666666667,
          "score_percent": 29.166666666666668,
          "score_distribution": {
            "0": 16,
            "1": 7,
            "4": 7
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 8,
          "incorrect_count": 22,
          "partial_credit_count": 9,
          "zero_count": 13,
          "mean_score_0_to_4": 1.6333333333333333,
          "score_percent": 40.833333333333336,
          "score_distribution": {
            "0": 13,
            "1": 5,
            "3": 4,
            "4": 8
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 2,
          "incorrect_count": 18,
          "partial_credit_count": 13,
          "zero_count": 5,
          "mean_score_0_to_4": 1.55,
          "score_percent": 38.75,
          "score_distribution": {
            "0": 5,
            "1": 5,
            "2": 6,
            "3": 2,
            "4": 2
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 15,
          "zero_count": 4,
          "mean_score_0_to_4": 1.6,
          "score_percent": 40.0,
          "score_distribution": {
            "0": 4,
            "1": 6,
            "2": 5,
            "3": 4,
            "4": 1
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 2,
          "incorrect_count": 18,
          "partial_credit_count": 14,
          "zero_count": 4,
          "mean_score_0_to_4": 1.55,
          "score_percent": 38.75,
          "score_distribution": {
            "0": 4,
            "1": 8,
            "2": 3,
            "3": 3,
            "4": 2
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is defined as the product of its transconductance (\\(g_m\\)) and output resistance (\\(r_o\\)):\n\\[ A_i = g_m \\cdot r_o \\]\n\n### Step-by-Step Analysis:\n1. **Transconductance (\\(g_m\\))**:\n   In saturation, \\(g_m\\) is given by:\n   \\[\n   g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}\n   \\]\n   where \\(V_{OV} = V_{GS} - V_{th}\\) (overdrive voltage). If both \\(W\\) and \\(L\\) are doubled, the ratio \\(W/L\\) **remains unchanged**. Assuming \\(V_{OV}\\) is constant (e.g., bias voltages are unchanged), \\(g_m\\) **stays the same**.\n\n2. **Output Resistance (\\(r_o\\))**:\n   The output resistance is approximately:\n   \\[\n   r_o = \\frac{V_A}{I_D}\n   \\]\n   where \\(V_A\\) (Early voltage) is **proportional to channel length \\(L\\)** (\\(V_A \\propto L\\)), and \\(I_D\\) (drain current) in saturation is:\n   \\[\n   I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2\n   \\]\n   Since \\(W/L\\) is unchanged and \\(V_{OV}\\) is constant, \\(I_D\\) **remains the same**. Doubling \\(L\\) doubles \\(V_A\\), so \\(r_o\\) **doubles**.\n\n3. **Intrinsic Gain (\\(A_i\\))**:\n   Combining the results:\n   \\[\n   A_i = g_m \\cdot r_o \\quad \\text{(with \\(g_m\\) unchanged and \\(r_o\\) doubled)}\n   \\]\n   Thus, \\(A_i\\) **doubles**.\n\n### Key Insight:\nThe intrinsic gain scales **linearly with channel length \\(L\\)** (since \\(A_i \\propto V_A \\propto L\\)) and is **independent of width \\(W\\)** (as long as \\(W/L\\) is constant). Doubling both \\(L\\) and \\(W\\) preserves \\(W/L\\), so only the \\(L\\)-dependent \\(r_o\\) changes, leading to a **2× increase in \\(A_i\\)**.\n\n### Final Answer:\n**The intrinsic gain doubles when both the length and width of a MOSFET are doubled.**",
        "format": "markdown",
        "sha256": "94ec064e7718c8986d474a033e883ba82ecb2a5c70b06d4a2758df7a991c4b96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that doubling both dimensions keeps W/L, gm, and drain current approximately unchanged at fixed overdrive, while the longer channel approximately doubles ro and intrinsic gain.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 4340,
        "total_tokens": 4373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 4340,
        "total_tokens": 4373,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET, defined as \\( A_i = g_m \\cdot r_o \\), depends on the transconductance (\\( g_m \\)) and the output resistance (\\( r_o \\)).\n\n### Key Relationships:\n1. **Transconductance (\\( g_m \\))**:\n   In saturation, \\( g_m \\propto \\sqrt{\\frac{W}{L}} \\cdot \\sqrt{I_D} \\). However, if the **overdrive voltage (\\( V_{OV} \\))** is held constant (a standard assumption in such scaling problems), \\( I_D \\) remains unchanged when \\( \\frac{W}{L} \\) is constant. Since doubling both \\( W \\) and \\( L \\) preserves \\( \\frac{W}{L} \\), **\\( g_m \\) stays the same**.\n\n2. **Output Resistance (\\( r_o \\))**:\n   \\( r_o = \\frac{V_A}{I_D} \\), where the Early voltage \\( V_A \\propto L \\). Doubling \\( L \\) doubles \\( V_A \\), and if \\( I_D \\) is constant (due to constant \\( V_{OV} \\) and \\( \\frac{W}{L} \\)), **\\( r_o \\) doubles**.\n\n3. **Intrinsic Gain (\\( A_i \\))**:\n   \\( A_i = g_m \\cdot r_o \\). With \\( g_m \\) unchanged and \\( r_o \\) doubled, **\\( A_i \\) doubles**.\n\n### Simplified Derivation:\nFrom small-signal analysis:\n\\[\nA_i = \\frac{2 V_A}{V_{OV}}\n\\]\nwhere \\( V_A \\propto L \\). If \\( V_{OV} \\) is constant and \\( L \\) doubles, \\( A_i \\) **increases by a factor of 2**.\n\n### Conclusion:\n**The intrinsic gain doubles** when both the length and width of a MOSFET are doubled, assuming the overdrive voltage (\\( V_{OV} \\)) remains constant (the typical assumption in such scaling scenarios). The width \\( W \\) does not affect \\( A_i \\) because it cancels out in the \\( \\frac{W}{L} \\) ratio, leaving \\( A_i \\) dependent only on \\( L \\) and \\( V_{OV} \\).",
        "format": "markdown",
        "sha256": "97971819336cd4e5680062b5562a02c347af887b95bba25d350352d654726b5d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that at fixed overdrive, doubling both dimensions preserves W/L and current, leaves gm approximately unchanged, doubles ro as channel length increases, and therefore doubles intrinsic gain. It also identifies the bias-condition assumption.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 5147,
        "total_tokens": 5180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 5147,
        "total_tokens": 5180,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4671,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET is defined as the product of its transconductance (\\(g_m\\)) and output resistance (\\(r_o\\)), i.e., \\(A_0 = g_m \\cdot r_o\\).\n\n### Key Relationships:\n1. **Transconductance (\\(g_m\\))** in saturation:\n   \\[\n   g_m = \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{OV}\n   \\]\n   where \\(V_{OV}\\) is the overdrive voltage (\\(V_{GS} - V_{th}\\)).\n\n2. **Output Resistance (\\(r_o\\))** due to channel-length modulation:\n   \\[\n   r_o = \\frac{1}{\\lambda I_D}\n   \\]\n   where \\(\\lambda\\) (channel-length modulation parameter) is **inversely proportional to \\(L\\)** (i.e., \\(\\lambda \\propto \\frac{1}{L}\\)).\n\n3. **Drain Current (\\(I_D\\))** in saturation:\n   \\[\n   I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) V_{OV}^2\n   \\]\n\n---\n\n### Scaling Analysis:\nIf **both \\(W\\) and \\(L\\) are doubled** (i.e., \\(W' = 2W\\), \\(L' = 2L\\)):\n- The **aspect ratio** \\(\\frac{W}{L}\\) **remains unchanged** (since \\(\\frac{2W}{2L} = \\frac{W}{L}\\)).\n- Thus, \\(g_m\\) and \\(I_D\\) **stay the same** (assuming \\(V_{OV}\\) is constant).\n- However, \\(\\lambda\\) **halves** because \\(\\lambda \\propto \\frac{1}{L}\\) (doubling \\(L\\) reduces \\(\\lambda\\) by a factor of 2).\n- Since \\(r_o = \\frac{1}{\\lambda I_D}\\) and \\(I_D\\) is unchanged, **\\(r_o\\) doubles** (because \\(\\lambda\\) is halved).\n\n---\n\n### Intrinsic Gain Calculation:\n\\[\nA_0 = g_m \\cdot r_o\n\\]\n- \\(g_m\\) remains the same.\n- \\(r_o\\) doubles.\n- **Result**: The intrinsic gain **doubles**.\n\n---\n\n### Final Answer:\n**The intrinsic gain of the MOSFET doubles when both its length and width are doubled.** This occurs because the output resistance \\(r_o\\) increases proportionally with channel length (due to \\(\\lambda \\propto 1/L\\)), while \\(g_m\\) remains constant (as the \\(W/L\\) ratio is unchanged). Thus, \\(A_0 = g_m \\cdot r_o\\) scales linearly with \\(L\\).",
        "format": "markdown",
        "sha256": "284a87b013395410fd3e7fe27e99dd668c3e1e95da1f9b28fdd827a133ae0415"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that at constant overdrive, doubling both dimensions leaves gm and ID approximately unchanged while halving λ doubles ro, so intrinsic gain approximately doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 4863,
        "total_tokens": 4896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 33,
        "output_tokens": 4863,
        "total_tokens": 4896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transconductance (\\( g_m \\)) of a MOSFET in the **saturation region** (the typical operating region for amplifiers) is directly proportional to the **overdrive voltage** (\\( V_{OV} = V_{GS} - V_{TH} \\)).\n\nFrom the square-law model for a MOSFET in saturation:\n\\[\nI_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2\n\\]\nTaking the derivative of \\( I_D \\) with respect to \\( V_{GS} \\) (where \\( V_{OV} = V_{GS} - V_{TH} \\)):\n\\[\ng_m = \\frac{dI_D}{dV_{GS}} = \\mu_n C_{ox} \\frac{W}{L} V_{OV}\n\\]\nThis shows that **\\( g_m \\) increases linearly with \\( V_{OV} \\)**.\n\n### Additional Considerations:\n1. **Velocity Saturation (Short-Channel Effects):**\n   In advanced models (e.g., for very short-channel MOSFETs), velocity saturation causes \\( g_m \\) to **saturate** (become constant) at high \\( V_{OV} \\), but it **does not decrease**. Thus, \\( g_m \\) still does not go down.\n\n2. **Subthreshold Region:**\n   In weak inversion, \\( g_m \\) is proportional to the drain current (\\( I_D \\)), which increases exponentially with \\( V_{GS} \\) (and thus \\( V_{OV} \\)). Here too, \\( g_m \\) **increases** with \\( V_{OV} \\).\n\n3. **Mobility Degradation:**\n   Even with mobility degradation (where \\( \\mu_n \\) decreases at high \\( V_{GS} \\)), \\( g_m \\) still **increases** with \\( V_{OV} \\), though at a diminishing rate (eventually saturating).\n\n### Conclusion:\n- **Student A is correct**: \\( g_m \\) **increases** with overdrive voltage in all standard operating regions (or at least does not decrease).\n- **Student B is incorrect**: \\( g_m \\) **never decreases** with \\( V_{OV} \\) in any standard MOSFET model.\n\n**Answer:** Student A is correct. The transconductance of a MOSFET increases with the overdrive voltage.",
        "format": "markdown",
        "sha256": "c2674366148e79e634bee9cebe59f9549ea8fd25d25088a895820a4d5c8de2d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The square-law derivation correctly shows that, for fixed device geometry, gm increases with VOV, so Student A is correct. The claims about all operating regions are overbroad, but do not undermine the intended fixed-device answer; the fixed-current caveat is not required.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 5348,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 5348,
        "total_tokens": 5393,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transconductance \\( g_m \\) of a MOSFET in the **saturation region** is fundamentally tied to its overdrive voltage (\\( V_{OV} = V_{GS} - V_{TH} \\)). Here's the breakdown:\n\n1. **Basic Model (Square-Law Approximation)**:\n   In the standard long-channel MOSFET model, the drain current in saturation is:\n   \\[\n   I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2\n   \\]\n   The transconductance is the derivative of \\( I_D \\) with respect to \\( V_{GS} \\):\n   \\[\n   g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu_n C_{ox} \\frac{W}{L} V_{OV}\n   \\]\n   **This shows \\( g_m \\) is directly proportional to \\( V_{OV} \\)**. As \\( V_{OV} \\) increases, \\( g_m \\) increases linearly.\n\n2. **Real-World Considerations**:\n   - **Mobility Degradation**: At high \\( V_{OV} \\), the electric field increases, reducing carrier mobility (\\( \\mu_n \\)). This can cause \\( g_m \\) to grow *sub-linearly* or even saturate, but it does not typically cause \\( g_m \\) to *decrease* with \\( V_{OV} \\).\n   - **Velocity Saturation**: In short-channel devices, velocity saturation may further limit the increase in \\( g_m \\), but again, \\( g_m \\) still generally rises with \\( V_{OV} \\) (just at a diminishing rate).\n\n3. **Conclusion**:\n   Under standard operating conditions (moderate \\( V_{OV} \\), long-channel approximation), **Student A is correct**: \\( g_m \\) increases with overdrive voltage. Student B’s claim (that \\( g_m \\) decreases) is incorrect in the fundamental model and only becomes partially relevant in advanced scenarios (e.g., extreme \\( V_{OV} \\) with mobility degradation), where \\( g_m \\) might *saturate* but not reverse direction.\n\n**Answer**: **Student A is correct**. The transconductance of a MOSFET increases with overdrive voltage in the standard model.",
        "format": "markdown",
        "sha256": "9fed726f402a7a2aaaa9fa0174fafefeafe9dc37027cf6b9cf1f017bc73b3721"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A and derives that, for fixed device size in the square-law model, gm is proportional to VOV. The extra nonideal-device caveats do not undermine the essential answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 1707,
        "total_tokens": 1752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1225,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 1707,
        "total_tokens": 1752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1225,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transconductance (\\( g_m \\)) of a MOSFET in the **saturation region** is directly proportional to the **overdrive voltage** (\\( V_{OV} = V_{GS} - V_{th} \\)).\n\n### Key Derivation:\nIn saturation, the drain current is:\n\\[\nI_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2\n\\]\nThe transconductance is defined as:\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\frac{\\partial I_D}{\\partial V_{OV}} \\cdot \\frac{\\partial V_{OV}}{\\partial V_{GS}} = \\frac{\\partial I_D}{\\partial V_{OV}}\n\\]\nDifferentiating \\( I_D \\):\n\\[\ng_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}\n\\]\n**This shows \\( g_m \\) increases linearly with \\( V_{OV} \\).**\n\n### Why Student B is Wrong:\n- In **basic MOSFET operation (strong inversion, saturation)**, \\( g_m \\) **increases** with \\( V_{OV} \\).\n- Student B might be confusing this with:\n  - **Channel-length modulation** (which *reduces* \\( g_m \\) slightly at high \\( V_{DS} \\), but this is a secondary effect).\n  - **Velocity saturation** (in very short-channel devices, \\( g_m \\) may saturate at high \\( V_{OV} \\), but it doesn’t *decrease*).\n  - **Subthreshold region** (where \\( g_m \\) is proportional to \\( I_D \\), but \\( V_{OV} \\) is not the primary driver here).\n\n### Conclusion:\n**Student A is correct.** Transconductance increases with overdrive voltage in the standard saturation region. Student B’s claim only applies in non-ideal or advanced scenarios (e.g., extreme short-channel effects), which are not the default assumption.\n\n**Answer:** Student A is correct. The transconductance of a MOSFET increases as the overdrive voltage increases.",
        "format": "markdown",
        "sha256": "16f9a89d4b980845efafdcff948c7c5549711a15782558c398824eca2bf70e6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives that for a fixed device size in long-channel saturation, gm increases linearly with VOV, so Student A is right. However, it incorrectly suggests Student B's claim applies only to non-ideal or advanced effects; it also holds when ID is fixed and W/L is reduced to raise VOV.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 1023,
        "total_tokens": 1068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 45,
        "output_tokens": 1023,
        "total_tokens": 1068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 578,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal model of a PMOS transistor is **structurally identical** to that of an NMOS transistor. Both models include the same fundamental components:\n\n- A **voltage-controlled current source** \\( g_m v_{gs} \\) (transconductance)\n- **Output resistance** \\( r_o \\) (due to channel-length modulation)\n- **Parasitic capacitances** \\( C_{gs} \\), \\( C_{gd} \\), \\( C_{sb} \\), etc. (for high-frequency analysis)\n- **Body-effect transconductance** \\( g_{mb} \\) (if substrate bias is considered)\n\n### Key Nuance: **Direction of the Current Source**\nWhile the **topology** of the model is the same, the **direction of the small-signal current source** differs due to the opposite carrier type (holes vs. electrons) and voltage polarities:\n\n- **NMOS**:  \n  In saturation, \\( I_D \\) increases with **positive** \\( v_{gs} \\).  \n  → Small-signal current source: **Drain → Source** (conventional direction).\n\n- **PMOS**:  \n  In saturation, \\( I_D \\) increases with **negative** \\( v_{gs} \\) (or positive \\( v_{sg} \\)).  \n  → Small-signal current source: **Source → Drain** (opposite to NMOS).\n\nHowever, in **standard small-signal analysis**:\n- The model is **drawn identically** for both devices (e.g., \\( g_m v_{gs} \\) current source from drain to source).\n- The **sign of \\( g_m \\)** implicitly accounts for the direction:\n  - For NMOS: \\( g_m > 0 \\)\n  - For PMOS: \\( g_m > 0 \\) **but** \\( v_{gs} \\) is negative in normal operation, so the *effective* current direction reverses.\n\n### Practical Implication\nIn circuit analysis (e.g., amplifiers), the **sign of the gain** will differ between NMOS and PMOS due to this polarity. For example:\n- A common-source NMOS amplifier has a **negative voltage gain** (\\( -g_m R_D \\)).\n- A common-source PMOS amplifier has a **positive voltage gain** (\\( +g_m R_D \\)) if the load is similarly configured.\n\n### Conclusion\n**Yes**, the small-signal model of a PMOS is **topologically identical** to that of an NMOS. The only difference lies in the **sign conventions** for \\( v_{gs} \\) and the direction of the current source, which are inherently accounted for in the device's operating region and bias conditions. In practice, engineers use the same model structure for both, adjusting for polarity in the analysis.\n\n> ✅ **Answer**: The small-signal models are **structurally identical**, but the **direction of the transconductance current source** (and thus the sign of \\( g_m \\) in equations) differs due to the opposite voltage polarities in PMOS vs. NMOS. For modeling purposes, the same diagram is used, with the understanding that PMOS operates with inverted voltage signs.",
        "format": "markdown",
        "sha256": "3cc2a517d1d0352b5487b9773846a32d1ccb616ef1abfd15ac49f48c4c1e27c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly states that the PMOS and NMOS small-signal models are structurally the same; differences in polarity and sign conventions do not change that conclusion.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1967,
        "total_tokens": 2002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 1967,
        "total_tokens": 2002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1296,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal model of a PMOS device is **identical in structure and form** to that of an NMOS device. Both use the same **hybrid-π model** (or other equivalent small-signal models like the T-model), consisting of:\n\n- A **transconductance current source** \\( g_m v_{gs} \\) (between drain and source),\n- An **output resistance** \\( r_o \\) in parallel with the current source,\n- **Intrinsic capacitances** (\\( C_{gs} \\), \\( C_{gd} \\), \\( C_{gb} \\), etc.).\n\n### Why They Are Identical:\n1. **Mathematical Consistency**:\n   - For **both NMOS and PMOS**, the transconductance \\( g_m \\) is defined as \\( \\frac{\\partial I_D}{\\partial V_{GS}} \\) and is **positive** in saturation.\n   - For NMOS: \\( I_D > 0 \\) (current flows *into* the drain).\n   - For PMOS: \\( I_D < 0 \\) (current flows *out of* the drain by convention), but \\( g_m > 0 \\).\n   - A **positive \\( v_{gs} \\)** (small-signal gate-source voltage) produces a **positive \\( i_d \\)** (small-signal drain current) for **both devices**:\n     - **NMOS**: \\( i_d > 0 \\) → drain current increases (more positive).\n     - **PMOS**: \\( i_d > 0 \\) → drain current becomes *less negative* (i.e., magnitude decreases, as the device turns off slightly).\n   - Thus, the relationship \\( i_d = g_m v_{gs} \\) holds **with the same sign convention** for both.\n\n2. **Model Structure**:\n   - The small-signal equivalent circuit diagram is drawn **identically** for NMOS and PMOS. The only difference lies in the **DC operating point** (e.g., \\( V_{GS} \\) for NMOS is positive, while for PMOS it is negative), but the *small-signal parameters* (\\( g_m \\), \\( r_o \\), capacitances) are derived using the same formulas.\n\n3. **Standard Practice**:\n   - Textbooks (e.g., Sedra & Smith, Razavi) and circuit simulators (SPICE) use the **same small-signal model** for both device types. The polarity of voltages/currents is handled implicitly by the DC bias conditions.\n\n### Key Clarification:\nWhile the **controlling voltage** for PMOS is often conceptually thought of as \\( v_{sg} \\) (source-gate voltage), in the standard small-signal model, **\\( v_{gs} \\) is used for both devices**, and \\( g_m \\) is always positive. This works because:\n- For PMOS, \\( v_{sg} = -v_{gs} \\), but since \\( g_m \\) is defined with respect to \\( V_{GS} \\) (not \\( V_{SG} \\)), the model remains consistent without sign flips.\n\n### Conclusion:\n**Yes, the small-signal model of a PMOS is identical to that of an NMOS.** The difference lies only in the **DC operating conditions** (e.g., voltage polarities, threshold voltage signs) and the **direction of current flow in the physical device**, but the *small-signal equivalent circuit itself* (topology, parameters, and equations) is the same for both. This is why the same model is used universally in analog IC design for both NMOS and PMOS transistors.",
        "format": "markdown",
        "sha256": "80462927912055a93d776f54f3870083315367405ef16538d60a27da95d973af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model. Its polarity discussion is compatible with consistent drain-current and voltage conventions; the golden solution explicitly awards full credit for the same-form conclusion.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 5994,
        "total_tokens": 6029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 5994,
        "total_tokens": 6029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5229,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal model of a PMOS transistor is **not strictly identical** to that of an NMOS transistor, but the **structure and form of the model are the same**, with critical differences in **polarity and direction** due to the complementary nature of the devices. Here’s the breakdown:\n\n---\n\n### ✅ **Core Similarities**\nBoth NMOS and PMOS small-signal models (e.g., the **hybrid-π model**) include:\n- A **voltage-controlled current source** between drain and source:  \n  \\( i_d = g_m \\cdot v_{control} \\)\n- An **output resistance** \\( r_o \\) in parallel with the current source.\n- Parasitic capacitances (e.g., \\( C_{gs}, C_{gd} \\)) between terminals.\n\nThe **topology** (how components connect) is identical.\n\n---\n\n### ❌ **Key Differences**\n| Feature               | NMOS                          | PMOS                          |\n|-----------------------|-------------------------------|-------------------------------|\n| **Controlling Voltage** | \\( v_{gs} \\) (gate-to-source) | \\( v_{sg} \\) (source-to-gate) |\n| **Current Direction**  | Drain → Source               | **Source → Drain**           |\n| **Transconductance**   | \\( g_m > 0 \\) for \\( v_{gs} > 0 \\) | \\( g_m > 0 \\) for \\( v_{sg} > 0 \\) (i.e., \\( v_{gs} < 0 \\)) |\n\n- If you **force the same voltage definition** (e.g., \\( v_{gs} \\) for both), the PMOS \\( g_m \\) becomes **negative** because a positive \\( v_{gs} \\) (gate more positive than source) *reduces* drain current in PMOS.\n- To avoid negative \\( g_m \\), PMOS models typically use \\( v_{sg} = -v_{gs} \\), so \\( g_m \\) remains positive.\n\n---\n\n### 🔄 **Practical Interpretation**\n- **The model diagram is a mirror image**:  \n  For NMOS, the current source arrow points **from drain to source**.  \n  For PMOS, it points **from source to drain** (since current flows in the opposite direction for the same voltage polarity).\n- **Mathematically**, if you define:\n  - NMOS: \\( i_d = g_m v_{gs} \\)\n  - PMOS: \\( i_d = g_m v_{sg} = -g_m v_{gs} \\)\n  ...then the **equations differ by a sign**, but the **structure is identical**.\n\n---\n\n### 📚 **Textbook Convention**\nMost textbooks (e.g., Razavi, Sedra & Smith) **treat the small-signal model as identical** for both devices, **provided you use the correct voltage reference**:\n- For NMOS: Use \\( v_{gs} \\), \\( g_m > 0 \\).\n- For PMOS: Use \\( v_{sg} \\), \\( g_m > 0 \\).\n\nThis avoids negative parameters and keeps the model visually consistent.\n\n---\n\n### ✅ **Final Answer**\n**No, the small-signal models are not identical in absolute terms**—the current direction and controlling voltage polarity differ. **However, the model structure (topology and components) is identical**, and in practice, they are treated as the same by adjusting the voltage definition (using \\( v_{sg} \\) for PMOS instead of \\( v_{gs} \\)).\n\n> **In short**: The *form* of the model is identical, but the *polarity* of the controlling voltage and current direction are reversed for PMOS. For analysis purposes, they are modeled identically with appropriate sign conventions.",
        "format": "markdown",
        "sha256": "fcdb306da472befdd796776a4b8817c2908486c28eaa221b88570856d9a8e724"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity and sign conventions adjusted.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 3309,
        "total_tokens": 3344,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 35,
        "output_tokens": 3309,
        "total_tokens": 3344,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2506,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the **$ I_X $ versus $ V_X $** characteristic for the given circuit, we must first interpret the configuration of the MOSFET $ M_1 $, the current source $ I_X $, and the voltage source $ V_X $. Based on the diagram and standard MOSFET behavior:\n\n---\n\n### **Circuit Interpretation**\n\n- The **MOSFET $ M_1 $** is an **n-channel** device (as indicated by the arrow on the source).\n- The **drain** of $ M_1 $ is connected to a **current source $ I_X $**.\n- The **source** of $ M_1 $ is **grounded**.\n- The **voltage source $ V_X $** is connected such that it measures the **drain-to-source voltage $ V_{DS} $** of the MOSFET.\n\nThis implies that:\n- $ V_X = V_{DS} $\n- $ I_X $ is the **drain current $ I_D $** flowing through the MOSFET.\n\nHowever, the **gate terminal** is not explicitly connected in the diagram. In such cases, it's common to assume that the **gate is connected to the drain**, forming a **diode-connected MOSFET**. This is a standard configuration used to characterize the **transfer characteristic** of a MOSFET.\n\n---\n\n### **Assumption: Diode-Connected MOSFET**\n\nIn a **diode-connected MOSFET**:\n- $ V_{GS} = V_{DS} = V_X $\n- The transistor operates in **saturation** when $ V_X > V_{th} $ (threshold voltage), because $ V_{DS} = V_{GS} $, which satisfies the condition for saturation: $ V_{DS} \\geq V_{GS} - V_{th} $\n\nThe **drain current** in saturation is given by:\n\n$$\nI_D = \\frac{1}{2} k_n (V_{GS} - V_{th})^2 = \\frac{1}{2} k_n (V_X - V_{th})^2\n$$\n\nWhere:\n- $ k_n $ is the transconductance parameter\n- $ V_{th} $ is the threshold voltage\n\n---\n\n### **Behavior of $ I_X $ vs $ V_X $**\n\n- **For $ V_X < V_{th} $**:  \n  The MOSFET is **off**, so $ I_X = 0 $\n\n- **For $ V_X \\geq V_{th} $**:  \n  The MOSFET turns **on**, and $ I_X $ increases **quadratically** with $ V_X $\n\nThus, the **$ I_X $ vs $ V_X $** curve has the following features:\n- **Zero current** for $ V_X < V_{th} $\n- **Parabolic rise** starting at $ V_X = V_{th} $\n- **Concave upward** shape due to the square law dependence\n\n---\n\n### **Final Sketch Description**\n\n- **X-axis**: $ V_X $ (Voltage across the MOSFET, i.e., $ V_{DS} $)\n- **Y-axis**: $ I_X $ (Drain current)\n\n**Graph Characteristics:**\n- A **flat line at zero** from $ V_X = 0 $ to $ V_X = V_{th} $\n- At $ V_X = V_{th} $, the curve **starts rising**\n- Beyond $ V_{th} $, the curve follows a **quadratic (parabolic) shape**, increasing more steeply as $ V_X $ increases\n\n---\n\n### ✅ **Answer: Sketch of $ I_X $ vs $ V_X $**\n\n```\nI_X\n |\n |        *\n |       *\n |      *\n |     *\n |    *\n |   *\n |  *\n | *\n +------------------ V_X\n  0    V_th\n```\n\n- **From $ V_X = 0 $ to $ V_X = V_{th} $**: $ I_X = 0 $\n- **From $ V_X = V_{th} $ onward**: $ I_X $ rises **quadratically** with $ V_X $\n\nThis is the **transfer characteristic** of a **diode-connected n-channel MOSFET**, where $ I_X $ is the drain current and $ V_X $ is the gate-to-source (and drain-to-source) voltage.\n\n---\n\n### 📌 **Conclusion**\n\nThe graph of $ I_X $ versus $ V_X $ for the given circuit (assuming a diode-connected MOSFET) is a **square-law curve** starting at $ V_X = V_{th} $, with **zero current below threshold** and **quadratic increase above threshold**.\n\n$$\n\\boxed{\n\\text{The } I_X \\text{ vs } V_X \\text{ graph is a parabola starting at } V_X = V_{th}, \\text{ with } I_X = 0 \\text{ for } V_X < V_{th} \\text{ and } I_X \\propto (V_X - V_{th})^2 \\text{ for } V_X \\geq V_{th}.\n}\n$$",
        "format": "markdown",
        "sha256": "dbc9d5b8b0bc87e38e232a39bd1ae46f7399b8667d488b590854d46241a27906"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS behavior: IX is approximately zero up to threshold and rises quadratically above it. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 5249,
        "total_tokens": 6577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 5249,
        "total_tokens": 6577,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the **I<sub>X</sub> vs. V<sub>X</sub>** characteristic for the given circuit, we analyze the behavior of transistor **M<sub>1</sub>**, which is a MOSFET with its **source grounded** and **gate connected to the drain** (a common configuration for diode-connected transistors used in I-V characterization). In this setup:\n\n- **V<sub>X</sub>** represents the **drain-source voltage (V<sub>DS</sub>)** of M<sub>1</sub>, since the source is grounded.\n- **I<sub>X</sub>** represents the **drain current (I<sub>D</sub>)** through M<sub>1</sub>, as it is the only path for current from the current source to ground.\n\n---\n\n### **Key Assumptions**\n- M<sub>1</sub> is an **NMOS transistor**.\n- The **gate is connected to the drain**, making it **diode-connected**.\n- This implies **V<sub>GS</sub> = V<sub>DS</sub> = V<sub>X</sub>**.\n- Let **V<sub>th</sub>** be the threshold voltage of the NMOS.\n\n---\n\n### **Operating Regions**\n\n#### **1. Cutoff Region (V<sub>X</sub> < V<sub>th</sub>)**\n- When **V<sub>X</sub> < V<sub>th</sub>**, the transistor is **off** (no inversion layer).\n- **I<sub>X</sub> = 0**\n\n#### **2. Saturation Region (V<sub>X</sub> ≥ V<sub>th</sub>)**\n- For a diode-connected NMOS, **V<sub>DS</sub> = V<sub>GS</sub>**, so the condition for saturation (**V<sub>DS</sub> ≥ V<sub>GS</sub> − V<sub>th</sub>**) is always satisfied.\n- The drain current follows the **square-law model**:\n  $$\n  I_X = \\frac{1}{2} \\mu C_{ox} \\frac{W}{L} (V_X - V_{th})^2\n  $$\n- This is a **parabolic curve** starting at **V<sub>X</sub> = V<sub>th</sub>** and increasing with **V<sub>X</sub>**.\n\n---\n\n### **Graphical Description**\n\n- **X-axis**: V<sub>X</sub> (voltage across the transistor, i.e., V<sub>DS</sub>)\n- **Y-axis**: I<sub>X</sub> (current through the transistor)\n\n#### **Shape of the Curve**\n- **From V<sub>X</sub> = 0 to V<sub>X</sub> = V<sub>th</sub>**: I<sub>X</sub> = 0 (flat line along the x-axis).\n- **For V<sub>X</sub> > V<sub>th</sub>**: I<sub>X</sub> increases **quadratically** with V<sub>X</sub>, forming a **parabola** that starts at (V<sub>th</sub>, 0) and curves upward.\n\n---\n\n### **Final Sketch Description**\n\n- **Start at (0, 0)** and remain at **I<sub>X</sub> = 0** until **V<sub>X</sub> = V<sub>th</sub>**.\n- At **V<sub>X</sub> = V<sub>th</sub>**, the curve begins to rise **smoothly and nonlinearly** (parabolic shape).\n- As **V<sub>X</sub> increases beyond V<sub>th</sub>**, the current **I<sub>X</sub> increases rapidly**, following the square-law relationship.\n\n---\n\n### ✅ **Answer**\n\nThe **I<sub>X</sub> vs. V<sub>X</sub>** characteristic is a **piecewise function**:\n\n- **I<sub>X</sub> = 0** for **V<sub>X</sub> < V<sub>th</sub>**\n- **I<sub>X</sub> ∝ (V<sub>X</sub> − V<sub>th</sub>)²** for **V<sub>X</sub> ≥ V<sub>th</sub>**\n\n**Sketch:**\n- A **horizontal line** at **I<sub>X</sub> = 0** from **V<sub>X</sub> = 0** to **V<sub>X</sub> = V<sub>th</sub>**.\n- A **parabolic curve** starting at **(V<sub>th</sub>, 0)** and rising upward as **V<sub>X</sub>** increases.\n\n---\n\n### 📌 **Visual Summary**\n\n```\nI_X\n |\n |           *\n |         *\n |       *\n |     *\n |   *\n | *\n +-------------------> V_X\n     V_th\n```\n\n- **Flat at zero** until **V<sub>th</sub>**.\n- **Parabolic rise** after **V<sub>th</sub>**.\n\nThis is the **typical I-V characteristic of a diode-connected NMOS transistor**.",
        "format": "markdown",
        "sha256": "7c1789b4e509b44d688666d986a388b5a6514bf6aaeefd6b92d473af160eb203"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and a quadratic rise above threshold. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 6094,
        "total_tokens": 7422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 6094,
        "total_tokens": 7422,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch **I<sub>X</sub> vs. V<sub>X</sub>** for the given circuit, we analyze the behavior of the **diode-connected NMOS transistor (M<sub>1</sub>)**, where:\n\n- **V<sub>X</sub>** is the voltage at the drain/gate node (relative to ground).\n- **I<sub>X</sub>** is the current flowing through the transistor (drain current).\n\n---\n\n### **Circuit Analysis**\n- **M<sub>1</sub>** is an **NMOS transistor** with:\n  - **Source (S)** connected to **ground**.\n  - **Drain (D)** and **Gate (G)** connected together (diode configuration).\n  - **V<sub>X</sub>** is the voltage applied at the drain/gate node.\n- In this configuration:\n  - **V<sub>GS</sub> = V<sub>DS</sub> = V<sub>X</sub>** (since gate and drain are shorted).\n  - The transistor operates in **cutoff** when **V<sub>X</sub> < V<sub>th</sub>** (threshold voltage).\n  - It enters **saturation** when **V<sub>X</sub> ≥ V<sub>th</sub>**, because:\n    $$\n    V_{DS} = V_X \\geq V_{GS} - V_{th} = V_X - V_{th} \\quad \\text{(always true for } V_X \\geq V_{th})\n    $$\n\n---\n\n### **Current-Voltage Relationship**\nIn **saturation**, the drain current is given by:\n$$\nI_X = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_X - V_{th})^2\n$$\nThis is a **quadratic (parabolic)** relationship between **I<sub>X</sub>** and **V<sub>X</sub>**.\n\n---\n\n### **Behavior Summary**\n| **Region**       | **Condition**         | **I<sub>X</sub> Behavior**                     |\n|------------------|-----------------------|-----------------------------------------------|\n| **Cutoff**       | $ V_X < V_{th} $    | $ I_X = 0 $                                 |\n| **Saturation**   | $ V_X \\geq V_{th} $ | $ I_X \\propto (V_X - V_{th})^2 $ (parabolic) |\n\n- At **$ V_X = V_{th} $**, the slope of the curve is **zero** (since the derivative of $ (V_X - V_{th})^2 $ at $ V_X = V_{th} $ is zero).\n- As $ V_X $ increases beyond $ V_{th} $, **I<sub>X</sub>** rises **quadratically**.\n\n---\n\n### **Sketch of I<sub>X</sub> vs. V<sub>X</sub>**\n\n```\nI_X\n  ^\n  |               *\n  |              *\n  |             *\n  |            *\n  |           *\n  |          *\n  |         *\n  |        *\n  +--------+--------+--------+-------->\n     0     V_th    V_X\n```\n\n- **For $ V_X < V_{th} $**: The curve lies on the **x-axis** (I<sub>X</sub> = 0).\n- **At $ V_X = V_{th} $**: The curve **starts** with a **horizontal tangent** (slope = 0).\n- **For $ V_X > V_{th} $**: The curve **rises parabolically**, following the square-law relationship.\n\n---\n\n### ✅ Final Answer\nThe **I<sub>X</sub> vs. V<sub>X</sub>** plot is a **parabolic curve** that:\n- Stays at **zero** for $ V_X < V_{th} $,\n- Starts rising **quadratically** from $ V_X = V_{th} $,\n- Has a **horizontal tangent** at $ V_X = V_{th} $.\n\nThis is the characteristic **I-V curve of a diode-connected NMOS transistor**. \n\n**Sketch:** A flat line at I<sub>X</sub> = 0 until V<sub>X</sub> = V<sub>th</sub>, then a smooth, upward-curving parabola starting from (V<sub>th</sub>, 0).",
        "format": "markdown",
        "sha256": "3c6ad1a45ce1d0266462aa053cbcf07268956aacef7233470223654432ea3414"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and a quadratic rise above threshold in saturation, matching the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 3941,
        "total_tokens": 5269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1328,
        "output_tokens": 3941,
        "total_tokens": 5269,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the **$ I_X $ versus $ V_X $** characteristic for the given circuit, we analyze the behavior of the MOSFET $ M_1 $ under the constraints imposed by the 1 V battery and the current source $ I_X $. Here's a step-by-step breakdown:\n\n---\n\n### **Circuit Interpretation**\n\n- **$ V_X $**: A variable voltage source connected to the **gate** of the MOSFET $ M_1 $.\n- **MOSFET $ M_1 $**: Assumed to be an **NMOS transistor** with:\n  - **Source** grounded (0 V),\n  - **Drain** connected to a current source $ I_X $,\n  - **Gate** connected to $ V_X $,\n  - **Threshold voltage** $ V_{th} = 1 \\, \\text{V} $ (inferred from the presence of the 1 V battery).\n- **Current Source $ I_X $**: The drain current of the MOSFET.\n- **1 V Battery**: Fixes the **drain voltage** at $ V_D = 1 \\, \\text{V} $, so $ V_{DS} = V_D - V_S = 1 \\, \\text{V} $.\n\nThus, the MOSFET operates with:\n- $ V_{GS} = V_X $,\n- $ V_{DS} = 1 \\, \\text{V} $,\n- $ V_{th} = 1 \\, \\text{V} $.\n\n---\n\n### **MOSFET Operating Regions**\n\nThe MOSFET transitions between **cutoff**, **saturation**, and **triode** regions based on $ V_X $:\n\n#### **1. Cutoff Region ($ V_X < V_{th} = 1 \\, \\text{V} $)**\n- $ V_{GS} < V_{th} $: MOSFET is **off**.\n- **$ I_X = 0 $** for all $ V_X < 1 \\, \\text{V} $.\n\n#### **2. Saturation Region ($ 1 \\leq V_X \\leq 2 \\, \\text{V} $)**\n- Saturation condition: $ V_{DS} \\geq V_{GS} - V_{th} \\Rightarrow 1 \\geq V_X - 1 \\Rightarrow V_X \\leq 2 \\, \\text{V} $.\n- Drain current in saturation:\n  $$\n  I_X = \\frac{1}{2} k (V_X - V_{th})^2 = \\frac{1}{2} k (V_X - 1)^2\n  $$\n  where $ k = \\mu_n C_{ox} \\frac{W}{L} $ is a process-dependent constant.\n- This is a **quadratic (parabolic)** relationship.\n\n#### **3. Triode Region ($ V_X > 2 \\, \\text{V} $)**\n- Triode condition: $ V_{DS} < V_{GS} - V_{th} \\Rightarrow 1 < V_X - 1 \\Rightarrow V_X > 2 \\, \\text{V} $.\n- Drain current in triode:\n  $$\n  I_X = k \\left[ (V_X - V_{th}) V_{DS} - \\frac{1}{2} V_{DS}^2 \\right] = k \\left[ (V_X - 1)(1) - \\frac{1}{2}(1)^2 \\right] = k(V_X - 1.5)\n  $$\n- This is a **linear** relationship with slope $ k $.\n\n---\n\n### **Key Observations**\n\n- At $ V_X = 1 \\, \\text{V} $: $ I_X = 0 $ (start of conduction).\n- At $ V_X = 2 \\, \\text{V} $: \n  - From saturation: $ I_X = \\frac{1}{2} k (2 - 1)^2 = \\frac{1}{2} k $\n  - From triode: $ I_X = k(2 - 1.5) = \\frac{1}{2} k $\n  - **Continuity**: The current and its derivative are continuous at $ V_X = 2 \\, \\text{V} $.\n- **Slope in saturation**: $ \\frac{dI_X}{dV_X} = k(V_X - 1) $, which increases from 0 to $ k $ as $ V_X $ goes from 1 to 2.\n- **Slope in triode**: Constant at $ k $.\n\n---\n\n### **Graph Description**\n\n- **For $ V_X < 1 \\, \\text{V} $**: Horizontal line at $ I_X = 0 $.\n- **For $ 1 \\leq V_X \\leq 2 \\, \\text{V} $**: A **smooth, upward-curving parabola** starting at $ (1, 0) $, increasing in slope until it reaches a slope of $ k $ at $ V_X = 2 \\, \\text{V} $.\n- **For $ V_X > 2 \\, \\text{V} $**: A **straight line** with constant slope $ k $, continuing from the end of the parabola.\n\nThis shape reflects the **nonlinear (quadratic)** behavior of the MOSFET in saturation and the **linear** behavior in triode.\n\n---\n\n### ✅ Final Answer\n\n**Sketch of $ I_X $ vs $ V_X $:**\n\n- **$ I_X = 0 $** for $ V_X < 1 \\, \\text{V} $\n- **Parabolic increase** from $ V_X = 1 \\, \\text{V} $ to $ V_X = 2 \\, \\text{V} $\n- **Linear increase** for $ V_X > 2 \\, \\text{V} $\n\nThe graph starts flat at zero, curves upward quadratically between 1 V and 2 V, then continues as a straight line with constant slope beyond 2 V.\n\n---\n\n### 📌 Visual Representation (Description)\n\n```\nI_X\n |\n |           *\n |         *   *\n |       *       *\n |     *           *\n |   *               *\n | *                   *\n +-----------------------+--> V_X\n 0   1     2\n```\n\n- **Flat line** from $ V_X = 0 $ to $ V_X = 1 $: $ I_X = 0 $\n- **Curved upward** from $ V_X = 1 $ to $ V_X = 2 $: $ I_X \\propto (V_X - 1)^2 $\n- **Straight line** for $ V_X > 2 $: $ I_X \\propto V_X $\n\nThis is the **characteristic curve** of a MOSFET with fixed $ V_{DS} = 1 \\, \\text{V} $ and threshold voltage $ V_{th} = 1 \\, \\text{V} $.",
        "format": "markdown",
        "sha256": "b5dd0b7fed5d01511742bd6281b18c6e7d7390470af6cf3b45759478236dd871"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The quadratic-to-linear behavior and saturation-to-triode transition are correctly identified. However, the 1 V supply fixes VDS; it does not establish VTH = 1 V. Thus the stated breakpoints of 1 V and 2 V are unsupported—the correct breakpoints are VTH and VTH + 1 V.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 8327,
        "total_tokens": 9812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 8327,
        "total_tokens": 9812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6893,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch **$ I_X $ versus $ V_X $** in the given circuit, we analyze the behavior of the MOSFET $ M_1 $ under the influence of the gate voltage $ V_X $ and the fixed drain-source voltage $ V_{DS} = 1 \\, \\text{V} $. Here's a step-by-step breakdown:\n\n---\n\n### **Circuit Interpretation**\n- **$ V_X $** is the **gate-source voltage** ($ V_{GS} $) of the n-channel MOSFET $ M_1 $ (since its source is grounded).\n- The **drain** of $ M_1 $ is connected to a current source $ I_X $ and a **1 V battery**, implying that the **drain voltage $ V_D = 1 \\, \\text{V} $**.\n- Thus, **$ V_{DS} = V_D - V_S = 1 \\, \\text{V} - 0 = 1 \\, \\text{V} $** (constant).\n\n---\n\n### **MOSFET Operating Regions**\nThe drain current $ I_X $ (which is the drain current $ I_D $) depends on $ V_{GS} = V_X $ and $ V_{DS} = 1 \\, \\text{V} $:\n\n#### **1. Cutoff Region**\n- **Condition**: $ V_X < V_{TH} $ (where $ V_{TH} $ is the threshold voltage).\n- **Behavior**: No channel formed; **$ I_X = 0 $**.\n- **Graph**: Flat line at $ I_X = 0 $ for $ V_X < V_{TH} $.\n\n#### **2. Saturation Region**\n- **Condition**: $ V_{TH} \\leq V_X \\leq V_{TH} + V_{DS} = V_{TH} + 1 \\, \\text{V} $\n- **Current Equation**:  \n  $$\n  I_X = \\frac{1}{2} \\mu C_{ox} \\frac{W}{L} (V_X - V_{TH})^2\n  $$\n- **Behavior**: Quadratic increase in $ I_X $ with $ V_X $, starting from zero at $ V_X = V_{TH} $.\n- **Graph**: A **parabola** (concave up) from $ V_X = V_{TH} $ to $ V_X = V_{TH} + 1 \\, \\text{V} $.\n\n#### **3. Triode Region**\n- **Condition**: $ V_X > V_{TH} + 1 \\, \\text{V} $\n- **Current Equation**:  \n  $$\n  I_X = \\mu C_{ox} \\frac{W}{L} \\left[ (V_X - V_{TH}) \\cdot V_{DS} - \\frac{1}{2} V_{DS}^2 \\right] = \\mu C_{ox} \\frac{W}{L} (V_X - V_{TH} - 0.5)\n  $$\n- **Behavior**: Linear increase in $ I_X $ with $ V_X $, with constant slope.\n- **Graph**: A **straight line** with positive slope for $ V_X > V_{TH} + 1 \\, \\text{V} $.\n\n---\n\n### **Key Observations**\n- The **transition point** between saturation and triode regions occurs at $ V_X = V_{TH} + 1 \\, \\text{V} $.\n- At this point:\n  - The **current** is continuous.\n  - The **slope** of the curve is also continuous (no kink), as both regions share the same derivative at the transition.\n- The **parabola** in saturation has an **increasing slope**, while the **linear region** has a **constant slope**.\n\n---\n\n### **Final Sketch Description**\n- **Horizontal Axis**: $ V_X $ (gate-source voltage).\n- **Vertical Axis**: $ I_X $ (drain current).\n- **Shape**:\n  - **Flat line** at $ I_X = 0 $ for $ V_X < V_{TH} $.\n  - **Parabolic curve** (concave up) from $ V_X = V_{TH} $ to $ V_X = V_{TH} + 1 \\, \\text{V} $, starting with zero slope.\n  - **Straight line** with constant positive slope for $ V_X > V_{TH} + 1 \\, \\text{V} $, smoothly transitioning from the parabola.\n\n---\n\n### **Graphical Representation**\n```\nI_X\n |\n |          *\n |         *\n |        *\n |       *\n |      *\n |     *\n |____*__________________\n       V_TH   V_TH+1   V_X\n```\n- The **parabola** starts at $ (V_{TH}, 0) $ and curves upward.\n- At $ V_X = V_{TH} + 1 \\, \\text{V} $, it transitions into a **straight line** with the same slope as the parabola's slope at that point.\n\n---\n\n### ✅ **Answer**\nThe **$ I_X $ vs $ V_X $** curve consists of:\n1. A **horizontal line at $ I_X = 0 $** for $ V_X < V_{TH} $,\n2. A **parabolic rise** from $ V_X = V_{TH} $ to $ V_X = V_{TH} + 1 \\, \\text{V} $,\n3. A **linear rise** with constant slope for $ V_X > V_{TH} + 1 \\, \\text{V} $.\n\n**Sketch**: A smooth curve starting flat, then curving upward quadratically, and finally becoming linear beyond $ V_{TH} + 1 \\, \\text{V} $, with no kink at the transition point.",
        "format": "markdown",
        "sha256": "4a9f14b2536de597b4acaab3765782f078f93de0f6475b9603eee0098ae4e00d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the quadratic saturation-region rise up to VTH + 1 V and the roughly linear triode-region rise beyond it, matching the full-credit rule.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 6185,
        "total_tokens": 7670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 6185,
        "total_tokens": 7670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch **$ I_X $ versus $ V_X $** in the given circuit, we analyze the behavior of the NMOS transistor $ M_1 $ under different operating regions. The key is to determine how the drain current (which equals $ I_X $) depends on the gate voltage $ V_X $, considering the fixed drain voltage due to the 1V battery.\n\n---\n\n### **Circuit Interpretation**\n- **$ V_X $**: Gate voltage of $ M_1 $\n- **$ M_1 $**: NMOS transistor\n- **$ I_X $**: Current through the current source (equal to the **drain current** $ I_D $ of $ M_1 $)\n- **1V Battery**: Fixes the **drain voltage** $ V_D = 1 \\, \\text{V} $\n- **Source of $ M_1 $**: Connected to **ground**, so $ V_S = 0 $\n\nThus:\n- $ V_{GS} = V_X - V_S = V_X $\n- $ V_{DS} = V_D - V_S = 1 \\, \\text{V} $\n\n---\n\n### **Operating Regions of the NMOS Transistor**\n\n#### **1. Cutoff Region**\n- Occurs when $ V_{GS} < V_{TH} $, i.e., $ V_X < V_{TH} $\n- **Drain current $ I_D = 0 $**\n- **Result**: $ I_X = 0 $\n\n#### **2. Saturation Region**\n- Occurs when:\n  - $ V_{GS} \\geq V_{TH} $ → $ V_X \\geq V_{TH} $\n  - $ V_{DS} \\geq V_{GS} - V_{TH} $ → $ 1 \\geq V_X - V_{TH} $ → $ V_X \\leq V_{TH} + 1 $\n- **Drain current**:\n  $$\n  I_D = \\frac{1}{2} k (V_{GS} - V_{TH})^2 = \\frac{1}{2} k (V_X - V_{TH})^2\n  $$\n- **Result**: $ I_X = \\frac{1}{2} k (V_X - V_{TH})^2 $, **quadratic increase**\n\n#### **3. Triode Region**\n- Occurs when $ V_X > V_{TH} + 1 $\n- **Drain current**:\n  $$\n  I_D = k \\left[ (V_{GS} - V_{TH}) V_{DS} - \\frac{1}{2} V_{DS}^2 \\right] = k \\left[ (V_X - V_{TH})(1) - \\frac{1}{2}(1)^2 \\right]\n  $$\n  $$\n  I_D = k (V_X - V_{TH} - 0.5)\n  $$\n- **Result**: $ I_X = k (V_X - V_{TH} - 0.5) $, **linear increase with slope $ k $**\n\n---\n\n### **Qualitative Sketch of $ I_X $ vs $ V_X $**\n\n| Region | $ V_X $ Range | Behavior of $ I_X $ |\n|--------|------------------|------------------------|\n| Cutoff | $ V_X < V_{TH} $ | $ I_X = 0 $ |\n| Saturation | $ V_{TH} \\leq V_X \\leq V_{TH} + 1 $ | Quadratic rise |\n| Triode | $ V_X > V_{TH} + 1 $ | Linear rise |\n\n- **At $ V_X = V_{TH} $**: $ I_X $ starts increasing from zero.\n- **At $ V_X = V_{TH} + 1 $**: Transition from quadratic to linear behavior.\n- **Slope in triode region**: Constant and positive (equal to $ k $).\n\n---\n\n### **Graphical Representation**\n\n```\nI_X\n |\n |           /\\\n |          /  \\\n |         /    \\\n |        /      \\\n |_______/________\\________>\n        V_TH    V_TH+1   V_X\n```\n\n- **Flat line at $ I_X = 0 $** for $ V_X < V_{TH} $\n- **Parabolic curve** from $ V_X = V_{TH} $ to $ V_X = V_{TH} + 1 $\n- **Straight line with constant slope** for $ V_X > V_{TH} + 1 $\n\n---\n\n### **Final Answer**\n\nThe plot of $ I_X $ versus $ V_X $ consists of three distinct regions:\n\n1. **Cutoff**: $ I_X = 0 $ for $ V_X < V_{TH} $\n2. **Saturation**: $ I_X \\propto (V_X - V_{TH})^2 $ for $ V_{TH} \\leq V_X \\leq V_{TH} + 1 $\n3. **Triode**: $ I_X \\propto (V_X - V_{TH}) $ for $ V_X > V_{TH} + 1 $\n\nThis results in a **zero current for low $ V_X $**, followed by a **quadratic rise**, and then a **linear rise** beyond the saturation threshold.\n\n---\n\n### ✅ **Sketch Summary**\n- **Horizontal axis**: $ V_X $\n- **Vertical axis**: $ I_X $\n- **Starts at 0** for $ V_X < V_{TH} $\n- **Curves upward quadratically** between $ V_{TH} $ and $ V_{TH} + 1 $\n- **Continues linearly** with a constant slope for $ V_X > V_{TH} + 1 $\n\n$$\n\\boxed{\n\\begin{tikzpicture}[scale=0.8]\n\\draw[->] (-1,0) -- (6,0) node[right]{$V_X$};\n\\draw[->] (0,-0.5) -- (0,4) node[above]{$I_X$};\n\\draw (0,0) -- (2,0);\n\\draw[domain=2:3, smooth, variable=\\x, blue] plot ({\\x}, {0.5*(\\x-2)^2});\n\\draw[domain=3:5, smooth, variable=\\x, blue] plot ({\\x}, {0.5*(3-2)^2 + 0.5*(\\x-3)});\n\\draw (2,0) -- (2,-0.1) node[below]{$V_{TH}$};\n\\draw (3,0) -- (3,-0.1) node[below]{$V_{TH}+1$};\n\\end{tikzpicture}\n}\n$$",
        "format": "markdown",
        "sha256": "76f21d54e5d55209ca9ae25eb79026d4ec607e9559e0a7674cb6940c1adcc3db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation rise up to VTH + 1 V, and roughly linear triode rise thereafter. The equations and final plot show the required trend; the rough ASCII sketch is inconsistent but does not overturn the correct analysis.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 6910,
        "total_tokens": 8395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1485,
        "output_tokens": 6910,
        "total_tokens": 8395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5493,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The device shown in the figure, which consists of a MOSFET \\( M_1 \\) with a current \\( I_x \\) flowing through it and two grounded capacitors, **can act as a current source** under specific conditions. Here's the reasoning:\n\n1. **MOSFET in Saturation**: A MOSFET in saturation mode exhibits a nearly constant drain current for a given gate-source voltage (\\( V_{GS} \\)), making it suitable for use as a current source. If \\( M_1 \\) is biased in saturation (i.e., \\( V_{DS} > V_{GS} - V_{th} \\), where \\( V_{th} \\) is the threshold voltage), it can maintain a relatively constant current \\( I_x \\) regardless of variations in the drain-source voltage.\n\n2. **Role of Capacitors**: The capacitors in the circuit (connected to the source and drain) are likely for AC coupling or stability purposes. In **DC analysis**, capacitors act as open circuits, so they do not affect the DC biasing of \\( M_1 \\). Thus, if \\( M_1 \\) is properly biased (e.g., via an external gate voltage not explicitly shown in the simplified diagram), it can still function as a current source.\n\n3. **Assumption of Proper Biasing**: While the diagram does not explicitly show the gate bias, the presence of \\( I_x \\) implies that \\( M_1 \\) is already operating in a mode where it sources current. In practical circuits, such as current mirrors or active loads, a MOSFET is often used as a current source when biased in saturation.\n\n**Conclusion**: Yes, the device can act as a current source **if \\( M_1 \\) is biased in saturation**. The capacitors do not prevent this functionality in DC operation.\n\n**Answer**: Yes, the MOSFET \\( M_1 \\) can act as a current source when properly biased in saturation, as its drain current \\( I_x \\) becomes relatively independent of the drain-source voltage. The capacitors do not inhibit this behavior in DC analysis.",
        "format": "markdown",
        "sha256": "6a1225331b697311b57fdc74e3d959314961a36bc644e8b36b641cb5a428c663"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that the device as drawn can act as a current source. M1 is a diode-connected PMOS with its gate and drain grounded, so it presents a low impedance of about 1/gm rather than maintaining nearly constant current; the assumed external gate bias is not in the figure.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 598,
        "output_tokens": 1796,
        "total_tokens": 2394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 598,
        "output_tokens": 1796,
        "total_tokens": 2394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1372,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **current mirror**, a fundamental analog circuit design used to replicate a reference current. Here's the analysis:\n\n1. **Circuit Structure**:\n   - The device includes a reference current source \\( I_x \\) connected to the drain of transistor \\( M_1 \\).\n   - Two NMOS transistors at the bottom (likely forming a current mirror pair) have their sources tied to ground.\n   - \\( M_1 \\) is likely diode-connected (gate-to-drain shorted), which is typical in current mirror designs to establish a stable gate-source voltage for the mirror.\n\n2. **Current Mirror Behavior**:\n   - In a standard **NMOS current mirror**, the reference current \\( I_x \\) flows through the diode-connected transistor, setting its gate-source voltage (\\( V_{GS} \\)).\n   - The second transistor (output stage) shares the same \\( V_{GS} \\), forcing it to **copy** \\( I_x \\) (assuming matched devices and ideal conditions).\n   - The output node of the mirror (e.g., the drain of the second transistor) thus provides a **constant current** proportional to \\( I_x \\), independent of the load voltage (within compliance limits).\n\n3. **Conclusion**:\n   - The circuit is designed to **act as a current source** by replicating \\( I_x \\) at its output. This is the core function of a current mirror.\n   - While the exact topology (e.g., basic, cascode, Wilson) isn't specified, the presence of \\( I_x \\) and the transistor configuration strongly suggests a current mirror.\n\n**Answer**:  \nYes, the device (a current mirror) **can act as a current source** by providing a stable output current proportional to \\( I_x \\).",
        "format": "markdown",
        "sha256": "d47baeb2ec85b5e227709c767d90d557129c98accdad662f1accf531cd254068"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the figure as an NMOS current mirror and concludes it can act as a current source. M1 is a diode-connected PMOS that presents low impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 598,
        "output_tokens": 1007,
        "total_tokens": 1605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 598,
        "output_tokens": 1007,
        "total_tokens": 1605,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The device shown in the figure—a **single NMOS transistor (M₁)**—**can act as a current source under specific conditions**, but **not inherently on its own**. Here’s the breakdown:\n\n---\n\n### ✅ **Yes, it *can* act as a current source**  \nA MOSFET **in saturation mode** behaves approximately like a **constant current source** for its drain current $ I_D $, **provided**:\n1. **The gate-source voltage ($ V_{GS} $) is fixed and greater than the threshold voltage ($ V_{TH} $)** – This ensures the transistor is in saturation.\n2. **The drain-source voltage ($ V_{DS} $) is sufficiently large** (i.e., $ V_{DS} \\geq V_{GS} - V_{TH} $) – This keeps the transistor in the **saturation (active) region**, where the drain current $ I_D $ is nearly independent of $ V_{DS} $.\n3. **The gate is properly biased** – In the diagram, the gate is not explicitly connected, but in practice, it must be driven by a **fixed voltage** (e.g., from a bias network or another circuit).\n\nIn this regime, the drain current is given by:\n$$\nI_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2\n$$\nThis current remains **approximately constant** even if $ V_{DS} $ varies (as long as saturation is maintained), which is the defining behavior of a **current source**.\n\n---\n\n### ❌ **But not on its own**  \n- A **single MOSFET alone** (without proper biasing) **cannot** act as a current source. It requires:\n  - A **fixed gate voltage** (e.g., from a voltage divider, op-amp, or another transistor in a current mirror).\n  - Sufficient **drain-source voltage** to maintain saturation.\n- In the diagram, **no gate bias is shown**, so the transistor would be **off** (if $ V_{GS} = 0 $) and **not conduct current** at all.\n\n---\n\n### 🔍 **Context Matters**  \nIn real circuits (e.g., **current mirrors**, **bias generators**, or **active loads**), MOSFETs are **intentionally biased in saturation** to function as current sources. The figure likely assumes such a context, even if not explicitly drawn.\n\n---\n\n### ✅ **Conclusion**  \n**Yes, the MOSFET can act as a current source *if it is biased in the saturation region with a fixed $ V_{GS} $ and sufficient $ V_{DS} $**.**  \nWithout proper biasing, it cannot. But in standard circuit design, this configuration **is commonly used as a current source**.\n\n> **Answer:**  \n> **Yes, the MOSFET can act as a current source when properly biased in the saturation region.**",
        "format": "markdown",
        "sha256": "50add14a9fd33f3411251a9c6e5e36df3cd0107f2bd378b52d89aa708f4e5a29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as an NMOS and concludes it can act as a current source. In the figure M1 is a diode-connected PMOS, which presents a low impedance (about 1/gm), so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 598,
        "output_tokens": 1527,
        "total_tokens": 2125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 598,
        "output_tokens": 1527,
        "total_tokens": 2125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure is a **common-source MOSFET amplifier** with **source degeneration**. Here's a structured analysis:\n\n---\n\n### **🔹 Circuit Configuration**\n- **Transistor**: $ M_1 $ (assumed to be an **n-channel MOSFET** unless specified otherwise; the arrow in the symbol typically indicates the body diode direction for nMOS).\n- **Input**: Gate voltage $ V_{\\text{in}} $.\n- **Output**: Drain voltage $ V_{\\text{out}} $.\n- **Resistors**:\n  - $ R_S $: Connected between $ V_{DD} $ and the **source** of $ M_1 $.\n  - $ R_D $: Connected between the **drain** of $ M_1 $ and ground.\n- **Power Supply**: $ V_{DD} $ (positive DC supply).\n\n> **Note**: The placement of $ R_S $ between $ V_{DD} $ and the source is **unconventional** (standard common-source amplifiers place $ R_S $ between the source and ground). However, for **AC analysis**, $ V_{DD} $ acts as an **AC ground**, so $ R_S $ effectively connects the source to AC ground. Thus, the small-signal behavior is equivalent to a **common-source amplifier with source degeneration**.\n\n---\n\n---\n\n### **🔹 DC Operating Point Analysis**\nTo determine the **bias point** (e.g., $ I_D $, $ V_{GS} $, $ V_{DS} $), we solve the following equations:\n\n1. **KVL at the source**:\n   $$\n   V_S = V_{DD} - I_D R_S\n   $$\n2. **Gate-source voltage**:\n   $$\n   V_{GS} = V_{\\text{in}} - V_S = V_{\\text{in}} - (V_{DD} - I_D R_S)\n   $$\n3. **MOSFET in saturation** (assuming $ V_{GS} > V_{th} $ and $ V_{DS} > V_{GS} - V_{th} $):\n   $$\n   I_D = \\frac{1}{2} k_n (V_{GS} - V_{th})^2\n   $$\n   where $ k_n = \\mu_n C_{ox} \\frac{W}{L} $ is the transistor transconductance parameter, and $ V_{th} $ is the threshold voltage.\n\nSubstituting $ V_{GS} $ into the saturation equation:\n$$\nI_D = \\frac{1}{2} k_n \\left( V_{\\text{in}} - V_{DD} + I_D R_S - V_{th} \\right)^2\n$$\nThis is a **quadratic equation** in $ I_D $. Solving it (numerically or graphically) gives the **DC drain current** $ I_D $, which determines:\n- $ V_S = V_{DD} - I_D R_S $\n- $ V_D = I_D R_D $ (since $ R_D $ connects the drain to ground)\n- $ V_{DS} = V_D - V_S = I_D (R_D + R_S) - V_{DD} $\n\n> **Key Insight**: The presence of $ R_S $ introduces **negative feedback**, stabilizing the bias point against variations in $ V_{th} $ or $ k_n $.\n\n---\n\n---\n\n### **🔹 Small-Signal Analysis (AC Response)**\nFor **AC signals**, $ V_{DD} $ is treated as **AC ground**, so $ R_S $ connects the source to AC ground. The small-signal model is:\n\n- **Input**: $ v_{\\text{in}} $ (AC component of $ V_{\\text{in}} $)\n- **Output**: $ v_{\\text{out}} $ (AC component of $ V_{\\text{out}} $)\n- **Transconductance**: $ g_m = \\frac{2 I_D}{V_{GS} - V_{th}} $\n- **Small-signal current**: $ i_d = g_m (v_{gs}) = g_m (v_{\\text{in}} - v_s) $\n- **Source voltage**: $ v_s = -i_d R_S $ (since $ R_S $ connects to AC ground)\n\n#### **Voltage Gain Derivation**\nFrom the small-signal model:\n$$\ni_d = g_m (v_{\\text{in}} - v_s) = g_m (v_{\\text{in}} + i_d R_S)\n$$\n$$\ni_d (1 - g_m R_S) = g_m v_{\\text{in}} \\quad \\Rightarrow \\quad i_d = \\frac{g_m v_{\\text{in}}}{1 - g_m R_S}\n$$\n$$\nv_{\\text{out}} = -i_d R_D = -\\frac{g_m R_D v_{\\text{in}}}{1 - g_m R_S} = \\frac{g_m R_D v_{\\text{in}}}{g_m R_S - 1}\n$$\nThus, the **voltage gain** is:\n$$\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_D}{g_m R_S - 1}\n$$\n\n#### **Approximation for Large $ g_m R_S $**\nIf $ g_m R_S \\gg 1 $ (i.e., strong source degeneration), then:\n$$\nA_v \\approx \\frac{R_D}{R_S}\n$$\n- **Sign**: Negative for **nMOS** (inverting amplifier), positive for **pMOS** (non-inverting).\n- **Magnitude**: Depends on the ratio $ R_D / R_S $. If $ R_D > R_S $, the gain is **greater than 1**.\n\n> **Key Insight**: Source degeneration **reduces the gain** compared to a common-source amplifier without $ R_S $ (which has $ A_v \\approx -g_m R_D $), but **improves linearity and stability**.\n\n---\n\n---\n\n### **🔹 Key Characteristics**\n| Parameter               | Value                                                                 |\n|-------------------------|-----------------------------------------------------------------------|\n| **Input Resistance**   | $ R_{\\text{in}} \\approx \\infty $ (MOSFET gate has negligible leakage) |\n| **Output Resistance**  | $ R_{\\text{out}} \\approx R_D \\parallel r_o $ (where $ r_o $ is the MOSFET output resistance) |\n| **Voltage Gain**       | $ A_v \\approx \\frac{R_D}{R_S} $ (for $ g_m R_S \\gg 1 $)             |\n| **Frequency Response** | Limited by parasitic capacitances (e.g., $ C_{GS} $, $ C_{GD} $)     |\n| **Bias Stability**     | Improved due to negative feedback from $ R_S $                      |\n\n---\n\n---\n\n### **🔹 Practical Considerations**\n1. **Biasing**:\n   - $ V_{\\text{in}} $ must be set such that $ V_{GS} > V_{th} $ (for nMOS) to ensure the transistor is in **saturation**.\n   - Example: If $ V_{DD} = 5\\,\\text{V} $, $ R_S = 1\\,\\text{k}\\Omega $, $ R_D = 2\\,\\text{k}\\Omega $, and $ V_{th} = 1\\,\\text{V} $, choose $ V_{\\text{in}} $ to satisfy $ V_{GS} > 1\\,\\text{V} $.\n\n2. **Source Degeneration**:\n   - $ R_S $ **stabilizes the bias point** but **reduces gain**. To recover gain, $ R_D $ must be larger than $ R_S $.\n   - For higher gain, $ R_S $ can be **bypassed with a capacitor** (for AC signals), restoring $ A_v \\approx -g_m R_D $.\n\n3. **Transistor Type**:\n   - If $ M_1 $ is a **pMOS**, the analysis is similar, but the **sign of the gain flips** (non-inverting amplifier). The condition for conduction becomes $ V_{SG} > |V_{th}| $.\n\n---\n\n---\n\n### **🔹 Summary**\n- **Circuit Type**: Common-source amplifier with **source degeneration**.\n- **DC Behavior**: Bias point determined by $ V_{DD} $, $ R_S $, $ R_D $, and MOSFET parameters.\n- **AC Behavior**: Voltage gain $ A_v \\approx R_D / R_S $ (for $ g_m R_S \\gg 1 $), with high input resistance and moderate output resistance.\n- **Advantages**: Stable bias, linear operation, and predictable gain.\n- **Disadvantages**: Reduced gain compared to a common-source amplifier without $ R_S $.\n\n> **Final Note**: If $ R_S $ were connected between the **source and ground** (standard configuration), the analysis would be identical. The given diagram’s placement of $ R_S $ between $ V_{DD} $ and the source is unconventional but **functionally equivalent for AC analysis** due to $ V_{DD} $ being an AC ground. For **DC analysis**, it requires solving the quadratic equation for $ I_D $.",
        "format": "markdown",
        "sha256": "b3c6b1914fc5a9b03fec8598444f088317778144787230362a97c0003eb873ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes a common-source stage with source degeneration, but misidentifies the depicted M1 as nMOS and derives an incorrect gain and polarity. The actual PMOS stage has the inverting gain approximately −gmRD/(1 + gmRS).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1592,
        "output_tokens": 8828,
        "total_tokens": 10420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6877,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1592,
        "output_tokens": 8828,
        "total_tokens": 10420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6877,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Common-Source Amplifier with Source Degeneration**\n\nThe given circuit is a **common-source MOSFET amplifier with source degeneration**, implemented using an **n-channel MOSFET (M₁)**. Below is a structured analysis covering **DC biasing**, **small-signal behavior**, and **key performance metrics**.\n\n---\n\n---\n\n## **🔹 1. Circuit Configuration & Component Roles**\n- **M₁**: n-channel MOSFET (source degeneration via $ R_S $).\n- **$ V_{DD} $**: Supply voltage.\n- **$ R_D $**: Drain resistor (load for the amplifier).\n- **$ R_S $**: Source resistor (introduces *source degeneration*).\n- **$ V_{in} $**: Input signal at the gate.\n- **$ V_{out} $**: Output signal at the drain (between $ R_D $ and M₁).\n\n> **Note**: The diagram shows $ R_S $ between $ V_{DD} $ and the source of M₁. However, for a standard **nMOS common-source amplifier**, $ R_S $ is typically connected **between the source and ground** (not $ V_{DD} $). Assuming this correction (a common convention), the analysis proceeds as follows:\n> - **$ V_{DD} \\rightarrow R_D \\rightarrow \\text{Drain} \\rightarrow \\text{Source} \\rightarrow R_S \\rightarrow \\text{Ground} $**\n> - **Gate** is driven by $ V_{in} $.\n> - **Output** ($ V_{out} $) is taken at the drain (node between $ R_D $ and M₁).\n\n---\n\n---\n\n## **🔹 2. DC Analysis (Biasing)**\n### **Assumptions**\n- MOSFET operates in **saturation (active) region** (for amplification).\n- Square-law model:  \n  $$\n  I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 = \\frac{1}{2} k_n (V_{GS} - V_{th})^2\n  $$\n  where $ k_n = \\mu_n C_{ox} \\frac{W}{L} $, $ V_{th} $ = threshold voltage.\n\n### **Key Equations**\n1. **Source Voltage**:  \n   $$\n   V_S = I_D R_S\n   $$\n2. **Gate-Source Voltage**:  \n   $$\n   V_{GS} = V_{in} - V_S = V_{in} - I_D R_S\n   $$\n3. **Drain Voltage (Output)**:  \n   $$\n   V_{out} = V_{DD} - I_D R_D\n   $$\n4. **Drain-Source Voltage**:  \n   $$\n   V_{DS} = V_{out} - V_S = V_{DD} - I_D (R_D + R_S)\n   $$\n\n### **Saturation Condition**\nFor the MOSFET to be in saturation:\n$$\nV_{DS} \\geq V_{GS} - V_{th}\n$$\nSubstituting:\n$$\nV_{DD} - I_D (R_D + R_S) \\geq (V_{in} - I_D R_S) - V_{th}\n$$\nThis inequality must hold for proper operation.\n\n### **Solving for $ I_D $**\nFrom $ V_{GS} = V_{in} - I_D R_S $ and the square-law model:\n$$\nI_D = \\frac{1}{2} k_n (V_{in} - I_D R_S - V_{th})^2\n$$\nThis is a **quadratic equation** in $ I_D $. Solving it requires substituting known values of $ V_{in}, V_{th}, k_n, R_S $.\n\n---\n\n---\n\n## **🔹 3. Small-Signal Analysis**\n### **Small-Signal Model**\n- The MOSFET is replaced by its **hybrid-π model**:\n  - Transconductance: $ g_m = \\sqrt{2 k_n I_D} $\n  - Output resistance: $ r_o = \\frac{1}{\\lambda I_D} $ (if channel-length modulation is considered, $ \\lambda > 0 $).\n\n- **Source degeneration** introduces feedback, reducing gain but improving linearity and stability.\n\n### **Voltage Gain ($ A_v $)**\nUsing the small-signal equivalent:\n$$\nA_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1 + g_m R_S}\n$$\n- **Interpretation**:\n  - Without $ R_S $ ($ R_S = 0 $), gain = $ -g_m R_D $ (standard common-source).\n  - With $ R_S $, gain is **reduced** due to negative feedback.\n  - The negative sign indicates **inversion** (output is 180° out of phase with input).\n\n### **Input Resistance ($ R_{in} $)**\n- The gate of a MOSFET has **very high input resistance** (insulated gate).\n- Thus, $ R_{in} \\approx \\infty $ (ideal for voltage amplifiers).\n\n### **Output Resistance ($ R_{out} $)**\n- $ R_{out} = R_D \\parallel r_o $\n- If $ r_o \\gg R_D $, then $ R_{out} \\approx R_D $.\n\n---\n\n---\n\n## **🔹 4. Key Observations & Applications**\n| **Parameter**       | **Value**                          | **Implication** |\n|----------------------|------------------------------------|-----------------|\n| **Voltage Gain**     | $ A_v = -\\frac{g_m R_D}{1 + g_m R_S} $ | Lower than standard common-source; more stable. |\n| **Input Resistance** | $ R_{in} \\approx \\infty $        | Ideal for high-impedance inputs. |\n| **Output Resistance**| $ R_{out} \\approx R_D $            | Depends on $ R_D $ and $ r_o $. |\n| **Bias Stability**   | Improved with $ R_S $             | Less sensitive to device variations. |\n| **Frequency Response** | Bandwidth limited by $ R_S C_{gs} $ | $ R_S $ introduces a pole at $ f_p = \\frac{1}{2\\pi R_S C_{gs}} $. |\n\n### **Advantages of Source Degeneration**\n- **Linearizes the transfer characteristic** (reduces distortion).\n- **Increases input resistance** (though already high for MOSFETs).\n- **Stabilizes the bias point** against parameter variations (e.g., $ V_{th} $, $ k_n $).\n\n### **Disadvantages**\n- **Reduced gain** compared to a non-degenerated common-source amplifier.\n- **Higher output impedance** (if $ R_S $ is large).\n\n---\n\n---\n\n## **🔹 5. Example Calculation (Illustrative)**\nAssume:\n- $ V_{DD} = 5 \\, \\text{V} $\n- $ R_D = 10 \\, \\text{k}\\Omega $\n- $ R_S = 1 \\, \\text{k}\\Omega $\n- $ V_{in} = 2 \\, \\text{V} $\n- $ V_{th} = 1 \\, \\text{V} $\n- $ k_n = 1 \\, \\text{mA/V}^2 $\n\n### **Step 1: Solve for $ I_D $**\nFrom $ V_{GS} = V_{in} - I_D R_S $ and $ I_D = \\frac{1}{2} k_n (V_{GS} - V_{th})^2 $:\n$$\nI_D = \\frac{1}{2} (2 - I_D \\cdot 1 - 1)^2 = \\frac{1}{2} (1 - I_D)^2\n$$\nMultiply both sides by 2:\n$$\n2I_D = (1 - I_D)^2 = 1 - 2I_D + I_D^2\n$$\nRearrange:\n$$\nI_D^2 - 4I_D + 1 = 0\n$$\nSolutions:\n$$\nI_D = \\frac{4 \\pm \\sqrt{16 - 4}}{2} = \\frac{4 \\pm \\sqrt{12}}{2} = 2 \\pm \\sqrt{3}\n$$\nTake the smaller root (since $ I_D $ must be < $ \\frac{V_{DD}}{R_D + R_S} = \\frac{5}{11} \\approx 0.45 \\, \\text{mA} $):\n$$\nI_D \\approx 2 - 1.732 = 0.268 \\, \\text{mA}\n$$\n\n### **Step 2: Compute $ g_m $**\n$$\ng_m = \\sqrt{2 k_n I_D} = \\sqrt{2 \\cdot 1 \\cdot 0.268} \\approx 0.732 \\, \\text{mS}\n$$\n\n### **Step 3: Voltage Gain**\n$$\nA_v = -\\frac{g_m R_D}{1 + g_m R_S} = -\\frac{0.732 \\cdot 10}{1 + 0.732 \\cdot 1} \\approx -\\frac{7.32}{1.732} \\approx -4.23\n$$\n\n---\n\n---\n\n## **🔹 6. Summary**\n| **Aspect**           | **Result** |\n|-----------------------|------------|\n| **Configuration**     | Common-source with source degeneration |\n| **DC Bias**          | Determined by $ V_{in}, V_{th}, R_S, R_D $ |\n| **Small-Signal Gain**| $ A_v = -\\frac{g_m R_D}{1 + g_m R_S} $ |\n| **Input Resistance** | $ \\approx \\infty $ |\n| **Output Resistance**| $ R_D \\parallel r_o $ |\n| **Stability**        | Improved due to $ R_S $ |\n| **Phase**            | Inverting (180° phase shift) |\n\nThis circuit is widely used in **analog IC design** for its **stability, linearity, and high input impedance**. The trade-off is **reduced gain**, which is acceptable in many applications where precision and stability are critical.",
        "format": "markdown",
        "sha256": "9205a460e234d521a8d420db72e4b2e738a0548cc59d908d078702ab6125339f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Although it gives the inverting gain formula, it identifies M₁ as NMOS and assumes a different resistor connection instead of analyzing the shown PMOS common-source stage.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1592,
        "output_tokens": 4640,
        "total_tokens": 6232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1592,
        "output_tokens": 4640,
        "total_tokens": 6232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2442,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: PMOS Common-Source Amplifier with Source Degeneration**\n\n---\n\n## **🔹 Circuit Identification**\nThe given circuit is a **PMOS Common-Source Amplifier with Source Degeneration**, configured as follows:\n- **Transistor**: $ M_1 $ (PMOS, as the arrow on the source points *inward* in standard notation).\n- **Power Supply**: $ V_{DD} $ (positive voltage rail).\n- **Source Resistor**: $ R_S $ (connected between $ V_{DD} $ and the source of $ M_1 $).\n- **Drain Resistor**: $ R_D $ (connected between the drain of $ M_1 $ and ground).\n- **Input**: $ V_{in} $ (applied to the gate of $ M_1 $).\n- **Output**: $ V_{out} $ (taken from the drain node, between $ R_D $ and $ M_1 $).\n\n---\n\n---\n\n## **🔹 DC Operating Point Analysis**\n### **Key Assumptions**\n- The transistor $ M_1 $ is in **saturation** (typical for amplifiers).\n- For a **PMOS**, saturation requires:\n  $$\n  V_{SD} \\geq V_{SG} - |V_{th,p}|,\n  $$\n  where $ V_{th,p} < 0 $ is the threshold voltage (e.g., $ V_{th,p} = -0.7 \\, \\text{V} $).\n\n### **DC Equations**\n1. **Drain Current ($ I_D $)**:\n   - Current flows from $ V_{DD} \\rightarrow R_S \\rightarrow M_1 \\rightarrow R_D \\rightarrow \\text{GND} $.\n   - Let $ V_S $ = source voltage, $ V_D $ = drain voltage.\n   - From Kirchhoff’s Voltage Law (KVL):\n     $$\n     V_S = V_{DD} - I_D R_S, \\quad V_D = I_D R_D.\n     $$\n   - Gate-source voltage:\n     $$\n     V_{GS} = V_{in} - V_S = V_{in} - (V_{DD} - I_D R_S).\n     $$\n   - For **PMOS in saturation**, the drain current is:\n     $$\n     I_D = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{th,p}|)^2 (1 + \\lambda V_{SD}),\n     $$\n     where:\n     - $ V_{SG} = V_S - V_{in} = V_{DD} - I_D R_S - V_{in} $,\n     - $ V_{SD} = V_S - V_D = V_{DD} - I_D (R_S + R_D) $.\n\n2. **Solving for $ I_D $**:\n   - Substitute $ V_{SG} $ and $ V_{SD} $ into the saturation equation.\n   - This is a **nonlinear equation** in $ I_D $, typically solved numerically or graphically (e.g., using load-line analysis).\n   - **Simplified Case (Ignoring Channel-Length Modulation, $ \\lambda = 0 $)**:\n     $$\n     I_D = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} \\left( (V_{DD} - V_{in} - I_D R_S) - |V_{th,p}| \\right)^2.\n     $$\n   - The solution depends on $ V_{in} $, $ V_{DD} $, $ R_S $, $ R_D $, and transistor parameters.\n\n---\n\n---\n\n## **🔹 Small-Signal (AC) Analysis**\n### **Small-Signal Model**\n- **AC Grounds**: $ V_{DD} $ and GND are AC grounds.\n- **Transistor Parameters**:\n  - Transconductance: $ g_m = \\sqrt{2 \\mu_p C_{ox} \\frac{W}{L} I_D} $,\n  - Output resistance: $ r_o = \\frac{1}{\\lambda I_D} $ (if channel-length modulation is considered).\n- **Source Degeneration**: $ R_S $ introduces **negative feedback**, reducing gain but improving linearity and input impedance.\n\n### **Voltage Gain ($ A_v = \\frac{v_{out}}{v_{in}} $)**\nUsing the **T-model** for the MOSFET with source degeneration:\n1. **Small-Signal Voltages**:\n   - $ v_{gs} = v_{in} - v_s $,\n   - $ v_s = -i_d R_S $ (since $ i_d $ flows through $ R_S $ to AC ground),\n   - $ v_{out} = -i_d R_D $ (drain voltage across $ R_D $).\n\n2. **Drain Current**:\n   $$\n   i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o} \\approx g_m v_{gs} \\quad (\\text{if } r_o \\gg R_D).\n   $$\n\n3. **Substitute $ v_{gs} $ and $ v_{out} $**:\n   $$\n   v_{gs} = v_{in} - (-i_d R_S) = v_{in} + i_d R_S.\n   $$\n   $$\n   i_d = g_m (v_{in} + i_d R_S).\n   $$\n   Solving for $ i_d $:\n   $$\n   i_d = \\frac{g_m v_{in}}{1 - g_m R_S}.\n   $$\n   **Note**: The negative sign in the denominator arises from the PMOS configuration (current direction). For **NMOS**, the gain would be $ -\\frac{g_m R_D}{1 + g_m R_S} $, but for **PMOS**, the sign flips due to the inverted current flow.\n\n4. **Voltage Gain**:\n   $$\n   A_v = \\frac{v_{out}}{v_{in}} = \\frac{-i_d R_D}{v_{in}} = \\frac{-g_m R_D}{1 + g_m R_S}.\n   $$\n   - **Key Insight**: The gain is **reduced** by the factor $ (1 + g_m R_S) $ due to source degeneration. This trade-off improves linearity and input impedance.\n\n### **Input Resistance ($ R_{in} $)**\n- The gate of a MOSFET has **negligible current** (infinite input resistance in ideal case).\n- With source degeneration, the input resistance remains **very high** (typically $ > 10^{12} \\, \\Omega $) because the gate is isolated by the oxide layer.\n\n### **Output Resistance ($ R_{out} $)**\n- Seen from the drain:\n  $$\n  R_{out} = R_D \\parallel r_o.\n  $$\n  - If $ r_o \\gg R_D $, then $ R_{out} \\approx R_D $.\n\n---\n\n---\n\n## **🔹 Key Characteristics**\n| **Parameter**       | **Expression**                          | **Interpretation**                                                                 |\n|----------------------|-----------------------------------------|------------------------------------------------------------------------------------|\n| **Voltage Gain**     | $ A_v \\approx -\\frac{g_m R_D}{1 + g_m R_S} $ | Reduced by $ R_S $ (source degeneration stabilizes gain).                        |\n| **Input Resistance** | $ R_{in} \\approx \\infty $             | MOSFET gate has negligible leakage current.                                       |\n| **Output Resistance**| $ R_{out} \\approx R_D \\parallel r_o $  | Dominated by $ R_D $ if $ r_o $ is large.                                         |\n| **Saturation Condition** | $ V_{SD} \\geq V_{SG} - |V_{th,p}| $ | Ensures $ M_1 $ operates in saturation for amplification.                        |\n| **DC Biasing**       | Depends on $ V_{in} $, $ R_S $, $ R_D $ | Sets $ I_D $ and $ V_{GS} $; critical for linear operation.                      |\n\n---\n\n---\n\n## **🔹 Practical Implications**\n1. **Source Degeneration ($ R_S $)**:\n   - **Pros**: Improves linearity, stabilizes gain against process variations, increases input impedance.\n   - **Cons**: Reduces voltage gain (trade-off between gain and stability).\n\n2. **PMOS vs. NMOS**:\n   - PMOS is used here because the source is connected to $ V_{DD} $ (positive rail). For NMOS, the source would typically connect to ground.\n   - PMOS requires $ V_{GS} < V_{th,p} $ (negative) to turn on, so $ V_{in} $ must be **lower than $ V_S $** for conduction.\n\n3. **Biasing**:\n   - To set a stable operating point, $ V_{in} $ must be chosen such that $ M_1 $ is in saturation. For example:\n     - If $ V_{DD} = 5 \\, \\text{V} $, $ R_S = 10 \\, \\text{k}\\Omega $, $ R_D = 20 \\, \\text{k}\\Omega $, and $ V_{th,p} = -1 \\, \\text{V} $, then $ V_{in} $ must be $ < V_{DD} - |V_{th,p}| $ (e.g., $ V_{in} = 3 \\, \\text{V} $) to ensure $ V_{SG} > |V_{th,p}| $.\n\n4. **Frequency Response**:\n   - Limited by parasitic capacitances (e.g., $ C_{GS} $, $ C_{GD} $) and $ R_S $, $ R_D $. Higher $ R_S $ or $ R_D $ reduces the bandwidth.\n\n---\n\n---\n\n## **🔹 Summary**\n- **Circuit Type**: PMOS Common-Source Amplifier with **Source Degeneration**.\n- **Function**: Voltage amplification with improved linearity and stability.\n- **Gain**: $ A_v \\approx -\\frac{g_m R_D}{1 + g_m R_S} $ (reduced by $ R_S $).\n- **Input/Output Impedances**: $ R_{in} \\approx \\infty $, $ R_{out} \\approx R_D $.\n- **Key Trade-off**: Source degeneration ($ R_S $) reduces gain but enhances robustness.\n\n> **💡 Note**: For **NMOS-based designs**, the source would connect to ground, and $ V_{DD} $ would be the drain supply. This circuit uses PMOS due to the source connection to $ V_{DD} $. Always verify transistor type via the symbol (arrow direction) and biasing.",
        "format": "markdown",
        "sha256": "d15ac5e539bc38eacb8f22572a857b56b3ec64f59816f38e39b4ab2ba24a8aac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and states the required inverting gain. The intermediate sign explanation is inconsistent, but the golden solution’s full-credit rule is met.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1592,
        "output_tokens": 6578,
        "total_tokens": 8170,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1592,
        "output_tokens": 6578,
        "total_tokens": 8170,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-drain amplifier (source follower)** using a MOSFET (labeled $ M_1 $). Here’s a detailed analysis:\n\n---\n\n### **1. Circuit Configuration**\n- **MOSFET Type**: Assuming $ M_1 $ is an **NMOS** (standard for this topology with $ V_{DD} $ as the positive supply).\n- **Connections**:\n  - **Gate**: Input voltage $ V_{in} $.\n  - **Drain**: Connected directly to $ V_{DD} $ (AC ground for small-signal analysis).\n  - **Source**: Connected to resistor $ R_S $, which ties to ground.\n  - **Output**: $ V_{out} $ is taken from the **source node** (between $ M_1 $ and $ R_S $).\n\nThis configuration is characteristic of a **source follower** (common-drain amplifier), where the output is at the source terminal.\n\n---\n\n---\n\n### **2. Small-Signal Analysis**\n#### **Key Assumptions**\n- MOSFET operates in **saturation region** (valid for typical amplifier operation).\n- $ V_{DD} $ is a DC supply → **AC ground** (no small-signal variation).\n- Small-signal parameters:  \n  - Transconductance: $ g_m $ (depends on bias current $ I_D $).  \n  - Output resistance of MOSFET: $ r_o = \\frac{1}{\\lambda I_D} $ (often very large, so $ r_o \\gg R_S $).\n\n#### **Small-Signal Equivalent Circuit**\n- The gate-source voltage: $ V_{gs} = V_{in} - V_{out} $.\n- The dependent current source: $ i_d = g_m V_{gs} + \\frac{v_{ds}}{r_o} $, where $ v_{ds} = -V_{out} $ (since drain is AC ground).\n- The current through $ R_S $: $ i_{R_S} = \\frac{V_{out}}{R_S} $.\n\nEquating the drain current to the current through $ R_S $:\n$$\n\\frac{V_{out}}{R_S} = g_m (V_{in} - V_{out}) - \\frac{V_{out}}{r_o}\n$$\n\n#### **Voltage Gain**\nSolving for $ \\frac{V_{out}}{V_{in}} $:\n$$\n\\frac{V_{out}}{V_{in}} = \\frac{g_m R_S}{1 + g_m R_S + \\frac{R_S}{r_o}}\n$$\n\n**Approximations**:\n- If $ r_o \\gg R_S $ (typical for MOSFETs), $ \\frac{R_S}{r_o} \\approx 0 $, so:\n  $$\n  \\frac{V_{out}}{V_{in}} \\approx \\frac{g_m R_S}{1 + g_m R_S} = \\frac{1}{1 + \\frac{1}{g_m R_S}}\n  $$\n- **Key Insight**: The gain is **less than 1** but approaches 1 as $ g_m R_S \\to \\infty $. For example, if $ g_m R_S = 10 $, the gain is $ \\approx 0.909 $.\n\n#### **Input and Output Impedances**\n- **Input Impedance ($ Z_{in} $)**:  \n  Very high (theoretically infinite) due to the insulated gate of the MOSFET. In practice, it is dominated by the gate capacitance at high frequencies.\n  \n- **Output Impedance ($ Z_{out} $)**:  \n  Low, given by:\n  $$\n  Z_{out} \\approx \\frac{1}{g_m} \\parallel R_S \\parallel r_o \\approx \\frac{1}{g_m} \\parallel R_S\n  $$\n  (since $ r_o \\gg R_S $). This makes the circuit ideal for **impedance matching** (e.g., driving low-impedance loads).\n\n---\n\n### **3. DC Biasing Considerations**\n- For the MOSFET to operate in saturation:\n  - $ V_{GS} > V_{th} $ (threshold voltage).\n  - $ V_{DS} = V_{DD} - I_D R_S > V_{GS} - V_{th} $.\n- The DC bias point (e.g., $ V_{GS} $, $ I_D $) must be set appropriately via $ V_{in} $ to ensure proper operation. However, the problem focuses on **small-signal behavior**, so DC biasing is assumed valid.\n\n---\n\n### **4. Practical Applications**\n- **Buffer Amplifier**:  \n  The source follower provides **high input impedance** and **low output impedance**, making it ideal for isolating stages (e.g., between a high-impedance sensor and a low-impedance load).\n- **Voltage Follower**:  \n  $ V_{out} \\approx V_{in} $ (with slight attenuation), so it \"follows\" the input voltage.\n- **Impedance Matching**:  \n  Used to match high-impedance sources to low-impedance loads without significant signal loss.\n\n---\n\n### **5. Summary of Key Characteristics**\n| **Parameter**       | **Value**                          | **Notes**                                  |\n|----------------------|------------------------------------|--------------------------------------------|\n| **Voltage Gain**     | $ \\approx 1 $ (but < 1)            | Approaches 1 as $ g_m R_S $ increases.     |\n| **Input Impedance**  | Very High ($ \\to \\infty $)         | Due to MOSFET gate insulation.             |\n| **Output Impedance** | Low ($ \\approx \\frac{1}{g_m} $)   | Enables driving low-impedance loads.       |\n| **Configuration**    | Common-Drain (Source Follower)     | Output at source, input at gate.           |\n\n---\n\n### **Conclusion**\nThis circuit is a **common-drain (source follower) amplifier** with the following properties:\n- **Voltage gain ≈ 1** (slightly less due to $ R_S $).\n- **High input impedance** (ideal for interfacing with high-impedance sources).\n- **Low output impedance** (ideal for driving low-impedance loads).\n- **Primary use**: Buffering, impedance matching, and voltage following in analog circuits.",
        "format": "markdown",
        "sha256": "6ef9e797e46612d0749477e2eb13fac52da67e658674a154c8a4006e3ab268e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, less-than-unity gain gm·RS/(1 + gm·RS), matching the full-credit rule. The output-resistance discussion is supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 3114,
        "total_tokens": 4409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 3114,
        "total_tokens": 4409,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-source amplifier with source degeneration**, where the MOSFET $ M_1 $ is configured with:\n- **Input** at the gate ($ V_{\\text{in}} $),\n- **Output** at the drain ($ V_{\\text{out}} $),\n- **Source resistor** $ R_S $ connected to ground,\n- **Drain connected directly to $ V_{DD} $** (a simplification; in practice, a drain resistor $ R_D $ is typically required for amplification).\n\nHowever, **without a drain resistor $ R_D $**, the output voltage $ V_{\\text{out}} $ would be fixed at $ V_{DD} $, making the circuit non-functional as an amplifier. Thus, we assume the diagram omits $ R_D $, and the correct configuration includes $ R_D $ between $ V_{DD} $ and the drain. Below is the **complete analysis** of the circuit under this assumption.\n\n---\n\n---\n\n### **1. DC Operating Point (Biasing)**\nFor the MOSFET to operate in **saturation** (required for amplification):\n- **Drain current**:  \n  $$\n  I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2 = k (V_{OV})^2,\n  $$\n  where $ V_{OV} = V_{GS} - V_{TH} $ is the overdrive voltage, and $ k = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} $.\n\n- **Gate-source voltage**:  \n  $$\n  V_{GS} = V_{BIAS} - I_D R_S,\n  $$\n  where $ V_{BIAS} $ is the DC input voltage.\n\n- **Substitute $ I_D $ into $ V_{GS} $**:  \n  $$\n  V_{GS} = V_{BIAS} - k R_S (V_{GS} - V_{TH})^2.\n  $$\n  Rearranging gives a **quadratic equation** in $ V_{OV} $:  \n  $$\n  k R_S (V_{OV})^2 + V_{OV} - (V_{BIAS} - V_{TH}) = 0.\n  $$\n  Solving for $ V_{OV} $ (taking the positive root for saturation):  \n  $$\n  V_{OV} = \\frac{-1 + \\sqrt{1 + 4 k R_S (V_{BIAS} - V_{TH})}}{2 k R_S}.\n  $$\n  Then, $ I_D = k (V_{OV})^2 $.\n\n- **Drain voltage**:  \n  $$\n  V_D = V_{DD} - I_D R_D.\n  $$\n- **Source voltage**:  \n  $$\n  V_S = I_D R_S.\n  $$\n\n**Saturation condition**:  \n$$\nV_{DS} = V_D - V_S = V_{DD} - I_D (R_D + R_S) \\geq V_{OV}.\n$$\n\n---\n\n---\n\n### **2. Small-Signal Analysis**\n#### **(a) Voltage Gain**\nThe **voltage gain** $ A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} $ is derived using the small-signal model:\n- **Transconductance**: $ g_m = \\frac{2 I_D}{V_{OV}} $.\n- **Output resistance of MOSFET**: $ r_o = \\frac{1}{\\lambda I_D} $ (if channel-length modulation is considered; otherwise $ r_o \\to \\infty $).\n\n**Assuming $ r_o \\gg R_D $** (typical for long-channel MOSFETs), the gain simplifies to:\n$$\nA_v = -\\frac{g_m R_D}{1 + g_m R_S}.\n$$\n- **Interpretation**:  \n  - The **negative sign** indicates a **180° phase shift** (inverting amplifier).  \n  - **Source degeneration** ($ R_S $) reduces the gain by a factor of $ (1 + g_m R_S) $, improving linearity and stability.  \n  - If $ R_S = 0 $, the gain becomes $ -g_m R_D $ (standard common-source amplifier).\n\n#### **(b) Input Resistance**\n- The **gate of a MOSFET has infinite input resistance** (ideal case).  \n  $$\n  R_{\\text{in}} \\approx \\infty.\n  $$\n\n#### **(c) Output Resistance**\n- The output resistance at the drain is:  \n  $$\n  R_{\\text{out}} = R_D \\parallel r_o \\approx R_D \\quad (\\text{if } r_o \\gg R_D).\n  $$\n\n---\n\n---\n\n### **3. Key Observations**\n1. **Purpose of $ R_S $**:  \n   - **Stabilizes the Q-point** (reduces sensitivity to device parameter variations).  \n   - **Reduces gain** but improves linearity and bandwidth.  \n   - **Increases input impedance** (though already very high for MOSFETs).\n\n2. **Effect of $ R_D $**:  \n   - **Converts drain current variations into voltage** ($ v_{\\text{out}} = -i_d R_D $).  \n   - Without $ R_D $, $ V_{\\text{out}} = V_{DD} $ (no amplification).\n\n3. **Assumption Clarification**:  \n   - The original diagram omits $ R_D $, but **a drain resistor is essential** for the circuit to function as an amplifier.  \n   - If $ R_D = 0 $, the circuit cannot amplify signals.\n\n---\n\n---\n\n### **4. Summary of Results**\n| **Parameter**       | **Expression**                          | **Notes**                                  |\n|----------------------|----------------------------------------|--------------------------------------------|\n| **DC Drain Current** | $ I_D = k (V_{OV})^2 $                | Solved via quadratic equation.             |\n| **Voltage Gain**     | $ A_v = -\\frac{g_m R_D}{1 + g_m R_S} $ | Negative sign = inverting amplifier.       |\n| **Input Resistance** | $ R_{\\text{in}} \\approx \\infty $      | Ideal for high-impedance sources.          |\n| **Output Resistance**| $ R_{\\text{out}} \\approx R_D $        | Dominated by $ R_D $ if $ r_o \\gg R_D $. |\n\n---\n\n---\n\n### **5. Practical Considerations**\n- **Bypassing $ R_S $**:  \n  If a **bypass capacitor** is added in parallel with $ R_S $, the AC gain becomes $ -g_m R_D $ (removing degeneration at signal frequencies).  \n- **Channel-Length Modulation**:  \n  If $ r_o $ is finite, the gain is slightly reduced:  \n  $$\n  A_v = -\\frac{g_m R_D}{1 + g_m R_S + \\frac{R_D + R_S}{r_o}}.\n  $$\n- **Frequency Response**:  \n  The **dominant pole** is typically at the output node ($ R_D $ and parasitic capacitances), limiting bandwidth.\n\n---\n\n### **Final Answer**\nThe circuit is a **common-source amplifier with source degeneration**. Assuming a drain resistor $ R_D $ (omitted in the diagram but necessary for operation):\n- **Voltage Gain**: $ \\boxed{A_v = -\\dfrac{g_m R_D}{1 + g_m R_S}} $ (inverting, reduced by $ R_S $).\n- **Input Resistance**: $ \\boxed{R_{\\text{in}} \\approx \\infty} $.\n- **Output Resistance**: $ \\boxed{R_{\\text{out}} \\approx R_D} $.\n- **DC Operating Point**: Solved via $ I_D = k (V_{OV})^2 $ and $ V_{GS} = V_{BIAS} - I_D R_S $.\n\n**Note**: Without $ R_D $, the circuit cannot amplify signals. The diagram likely omits $ R_D $ for simplicity.",
        "format": "markdown",
        "sha256": "be9c7212c62ac2cfb7a00099c79156493d6875f43448f787615d556a30b4740e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a source follower with output at the source and the drain tied to VDD. The answer misreads it as a common-source stage, invents an omitted drain resistor, and gives an inapplicable inverting gain.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 6988,
        "total_tokens": 8283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 6988,
        "total_tokens": 8283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Common-Drain (Source Follower) Amplifier**\n\nThe given circuit is a **common-drain (source follower) MOSFET amplifier** using an **n-channel MOSFET (M₁)**. Below is a comprehensive analysis of its behavior, including **configuration, small-signal gain, input/output impedance, and DC biasing considerations**.\n\n---\n\n---\n\n## **🔹 1. Circuit Configuration**\n- **Type**: **Source Follower (Common-Drain Amplifier)**\n  - **Input**: Applied to the **gate** of M₁ ($V_{\\text{in}}$).\n  - **Output**: Taken from the **source** of M₁ ($V_{\\text{out}}$).\n  - **Drain**: Connected directly to $V_{DD}$ (AC ground).\n  - **Source**: Connected to a resistor $R_S$ to ground.\n\n- **Key Feature**:\n  - The **output voltage follows the input voltage** (with a slight offset), hence the name *source follower*.\n  - Acts as a **voltage buffer** with **high input impedance** and **low output impedance**.\n\n---\n\n---\n\n## **🔹 2. Small-Signal Analysis**\n### **Assumptions**\n- MOSFET operates in **saturation region** (valid for small-signal analysis).\n- $r_o$ (channel-length modulation resistance) is **neglected** (assumed $r_o \\to \\infty$).\n- $V_{DD}$ is a **DC supply**, so its AC voltage is **0** (AC ground).\n\n---\n\n### **(a) Voltage Gain ($A_v = \\frac{V_{\\text{out}}}{V_{\\text{in}}}$)**\nUsing the **small-signal model**:\n- The **transconductance** $g_m = \\frac{2I_D}{V_{OV}}$ (where $V_{OV} = V_{GS} - V_{th}$).\n- The **source resistor** $R_S$ forms a voltage divider with the MOSFET’s intrinsic resistance $\\frac{1}{g_m}$.\n\n**Derivation**:\n- Small-signal current through $R_S$: $i_s = \\frac{v_{\\text{out}}}{R_S}$.\n- Small-signal drain current: $i_d = g_m v_{gs} = g_m (v_{\\text{in}} - v_{\\text{out}})$.\n- Since $i_s = i_d$ (no gate current), we equate:\n  $$\n  \\frac{v_{\\text{out}}}{R_S} = g_m (v_{\\text{in}} - v_{\\text{out}})\n  $$\n- Solving for $A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}}$:\n  $$\n  A_v = \\frac{g_m R_S}{1 + g_m R_S} = \\frac{1}{1 + \\frac{1}{g_m R_S}}\n  $$\n\n**Key Observations**:\n- **Gain is always < 1** (but approaches 1 as $g_m R_S \\to \\infty$).\n- **No voltage amplification**, but it **buffers** the signal with **low distortion**.\n- **Example**: If $g_m R_S = 10$, then $A_v \\approx 0.909$ (90.9% of $V_{\\text{in}}$).\n\n---\n\n### **(b) Input Impedance ($Z_{\\text{in}}$)**\n- The **gate of a MOSFET** is insulated by oxide, so **no DC current flows** into the gate.\n- **Small-signal input impedance** is **very high** (typically **$10^{12} \\Omega$ or more**).\n- **Conclusion**:\n  $$\n  Z_{\\text{in}} \\approx \\infty \\quad (\\text{Ideal: No loading effect on the source})\n  $$\n\n---\n\n### **(c) Output Impedance ($Z_{\\text{out}}$)**\n- The **output is at the source node**, which sees:\n  - The **intrinsic resistance** of the MOSFET: $\\frac{1}{g_m}$.\n  - The **source resistor** $R_S$.\n\n**Derivation**:\n- Using **test voltage method**, the output resistance is:\n  $$\n  Z_{\\text{out}} = \\frac{1}{g_m} \\parallel R_S = \\frac{R_S}{1 + g_m R_S}\n  $$\n\n**Key Observations**:\n- **Low output impedance** (e.g., if $g_m = 10 \\text{ mS}$ and $R_S = 1 \\text{ k}\\Omega$, then $Z_{\\text{out}} \\approx 90.9 \\Omega$).\n- **Excellent for driving low-impedance loads** (e.g., speakers, ADCs).\n\n---\n\n---\n\n## **🔹 3. DC Biasing Analysis**\nTo ensure **proper operation**, the MOSFET must be biased in **saturation**:\n- **Saturation condition**:\n  $$\n  V_{DS} \\geq V_{GS} - V_{th}\n  $$\n  - Here, $V_{DS} = V_{DD} - V_S$ (since drain = $V_{DD}$, source = $V_S$).\n  - $V_{GS} = V_G - V_S$ (gate voltage = $V_{\\text{in}}$ in DC).\n\n**DC Current Equation**:\n- In saturation, the drain current is:\n  $$\n  I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2\n  $$\n- The same current flows through $R_S$:\n  $$\n  I_D = \\frac{V_S}{R_S}\n  $$\n- Equating the two:\n  $$\n  \\frac{V_S}{R_S} = \\frac{1}{2} k (V_G - V_S - V_{th})^2 \\quad \\text{(where } k = \\mu_n C_{ox} \\frac{W}{L} \\text{)}\n  $$\n- This is a **quadratic equation** in $V_S$ and must be solved numerically or graphically for a given $V_G$.\n\n**Example**:\n- If $V_{DD} = 5 \\text{ V}$, $R_S = 1 \\text{ k}\\Omega$, $V_{th} = 1 \\text{ V}$, and $k = 1 \\text{ mA/V}^2$:\n  - Assume $V_G = 2 \\text{ V}$ (bias voltage).\n  - Solve for $V_S$:\n    $$\n    \\frac{V_S}{1000} = 0.5 \\times 0.001 (2 - V_S - 1)^2 \\Rightarrow V_S = 1000 \\times 0.0005 (1 - V_S)^2\n    $$\n    $$\n    V_S = 0.5 (1 - 2V_S + V_S^2) \\Rightarrow V_S^2 - 2.5V_S + 0.5 = 0\n    $$\n    - Solutions: $V_S \\approx 0.21 \\text{ V}$ or $V_S \\approx 2.29 \\text{ V}$.\n    - Only $V_S = 0.21 \\text{ V}$ satisfies $V_{DS} = 5 - 0.21 = 4.79 \\text{ V} \\geq V_{GS} - V_{th} = (2 - 0.21) - 1 = 0.79 \\text{ V}$.\n\n---\n\n---\n\n## **🔹 4. Key Characteristics Summary**\n| **Parameter**       | **Value**                          | **Interpretation**                          |\n|----------------------|------------------------------------|---------------------------------------------|\n| **Configuration**    | Common-Drain (Source Follower)    | Output at source, input at gate             |\n| **Voltage Gain**     | $A_v = \\frac{g_m R_S}{1 + g_m R_S}$ | < 1, approaches 1 for large $g_m R_S$      |\n| **Input Impedance**  | $Z_{\\text{in}} \\approx \\infty$   | No loading on the input source              |\n| **Output Impedance** | $Z_{\\text{out}} = \\frac{1}{g_m} \\parallel R_S$ | Low, good for driving loads |\n| **DC Biasing**       | Requires $V_{DS} \\geq V_{GS} - V_{th}$ | Ensures saturation region operation |\n\n---\n\n---\n\n## **🔹 5. Practical Applications**\n- **Voltage Buffer**: Used to **isolate high-impedance sources** (e.g., sensors) from **low-impedance loads** (e.g., ADC inputs).\n- **Impedance Matching**: Converts **high input impedance** to **low output impedance**.\n- **Signal Conditioning**: Preserves signal integrity in **multi-stage amplifiers**.\n\n---\n---\n## **🔹 6. Limitations**\n- **No voltage gain** (always $A_v < 1$).\n- **Offset voltage** due to $V_{GS}$ (not ideal for precision applications).\n- **Dependent on $g_m$**, which varies with bias current and temperature.\n\n---\n---\n## **📌 Final Conclusion**\nThis circuit is a **source follower (common-drain amplifier)** with:\n✅ **High input impedance** (minimal loading on the source).\n✅ **Low output impedance** (can drive low-impedance loads).\n✅ **Unity voltage gain** (acts as a buffer).\n✅ **Requires proper DC biasing** to ensure MOSFET operates in saturation.\n\n**Ideal for**: **Buffering, impedance matching, and signal isolation** in analog circuits.",
        "format": "markdown",
        "sha256": "352c442a177bbaeb1f08032868f726033dc0efffe0795e219a78591c44510e50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, \\(g_mR_S/(1+g_mR_S)\\). The extra output-resistance result is also correct; the erroneous numerical DC-bias example is supplementary and does not change the essential answer.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 7460,
        "total_tokens": 8755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1295,
        "output_tokens": 7460,
        "total_tokens": 8755,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Common-Source MOSFET Amplifier**\n\nThe circuit in the figure is a **single-stage common-source amplifier** using an **n-channel MOSFET (M₁)**. Below is a detailed analysis of its operation, DC/AC behavior, and key performance metrics.\n\n---\n\n---\n\n---\n\n## **📌 Circuit Configuration**\n- **Transistor**: N-channel MOSFET (**M₁**)  \n  - **Gate (G)**: Input node (**V<sub>in</sub>**)  \n  - **Drain (D)**: Output node (**V<sub>out</sub>**)  \n  - **Source (S)**: Grounded  \n- **Power Supply**: **V<sub>DD</sub>** (positive voltage)  \n- **Drain Resistor**: **R<sub>D</sub>** (load resistor for biasing and signal development)  \n\n**Topology**:  \nThis is a **common-source configuration** because the **source terminal is common** to both the input (gate) and output (drain) loops. It is widely used in analog circuits for **voltage amplification** and **signal inversion**.\n\n---\n\n---\n\n---\n\n## **🔋 DC Analysis (Biasing)**\n### **Operating Region**\nFor **amplification**, the MOSFET must operate in the **saturation (active) region**, where:\n- **V<sub>DS</sub> > V<sub>GS</sub> − V<sub>TH</sub>**  \n- **V<sub>GS</sub> > V<sub>TH</sub>** (threshold voltage)  \n\n### **Drain Current (I<sub>D</sub>)**\nIn saturation, the drain current is:\n$$\nI_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2\n$$\n- **μ<sub>n</sub>**: Electron mobility  \n- **C<sub>ox</sub>**: Oxide capacitance per unit area  \n- **W/L**: Width-to-length ratio of the MOSFET  \n- **V<sub>GS</sub> = V<sub>in</sub>** (since source is grounded)  \n\n### **DC Output Voltage (V<sub>out</sub>)**\nThe voltage drop across **R<sub>D</sub>** is **I<sub>D</sub>·R<sub>D</sub>**, so:\n$$\nV_{out} = V_{DD} - I_D \\cdot R_D\n$$\n**Note**: Proper biasing requires **V<sub>in</sub>** to be set such that **V<sub>DS</sub> > V<sub>GS</sub> − V<sub>TH</sub>** (saturation condition).\n\n---\n\n---\n\n---\n\n## **📡 AC (Small-Signal) Analysis**\n### **Small-Signal Model**\nFor **AC signals**, the MOSFET is modeled using its **small-signal parameters**:\n1. **Transconductance (g<sub>m</sub>)**  \n   $$\n   g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} I_D} \\quad \\text{or} \\quad g_m = \\frac{2 I_D}{V_{GS} - V_{TH}}\n   $$\n2. **Output Resistance (r<sub>o</sub>)** (due to channel-length modulation)  \n   $$\n   r_o = \\frac{1}{\\lambda I_D}\n   $$\n   where **λ** is the channel-length modulation parameter (typically small, e.g., 0.01–0.1 V<sup>−1</sup>).\n\n### **Voltage Gain (A<sub>v</sub>)**\nThe **small-signal voltage gain** is:\n$$\nA_v = \\frac{v_{out}}{v_{in}} = -g_m \\cdot (R_D \\parallel r_o)\n$$\n- **Negative sign**: Indicates **180° phase inversion** (output is inverted relative to input).  \n- **If r<sub>o</sub> ≫ R<sub>D</sub>** (common in short-channel MOSFETs), then:  \n  $$\n  A_v \\approx -g_m R_D\n  $$\n\n**Example**:  \nIf **g<sub>m</sub> = 1 mS** and **R<sub>D</sub> = 10 kΩ**, then **A<sub>v</sub> ≈ −10** (gain of 10 with inversion).\n\n### **Input Impedance (Z<sub>in</sub>)**\n- The **gate of a MOSFET** is insulated by SiO₂, so:  \n  $$\n  Z_{in} \\approx \\infty \\quad \\text{(very high, typically > 10<sup>12</sup> Ω)}\n  $$\n- **Advantage**: Minimal loading effect on the previous stage.\n\n### **Output Impedance (Z<sub>out</sub>)**\n- The output sees **R<sub>D</sub>** in parallel with **r<sub>o</sub>**:  \n  $$\n  Z_{out} = R_D \\parallel r_o \\approx R_D \\quad \\text{(if } r_o \\gg R_D \\text{)}\n  $$\n\n---\n\n---\n\n---\n\n## **📈 Key Characteristics**\n| **Parameter**       | **Value**                          | **Notes**                                  |\n|----------------------|------------------------------------|--------------------------------------------|\n| **Configuration**    | Common-Source                      | Source grounded, input at gate, output at drain |\n| **Gain (A<sub>v</sub>)** | −g<sub>m</sub>R<sub>D</sub>        | Inverting amplifier                        |\n| **Input Impedance**  | ~∞ (High)                          | Ideal for high-impedance sources           |\n| **Output Impedance** | ~R<sub>D</sub>                     | Depends on R<sub>D</sub> and r<sub>o</sub> |\n| **Frequency Response** | Limited by parasitic capacitances | Higher gain at low frequencies             |\n| **Biasing**          | V<sub>GS</sub> > V<sub>TH</sub>    | Ensures saturation for amplification       |\n\n---\n\n---\n\n---\n\n## **🔍 Practical Considerations**\n1. **Biasing Stability**:  \n   - A **DC bias voltage** (e.g., via a voltage divider) is often added to **V<sub>in</sub>** to ensure **V<sub>GS</sub> > V<sub>TH</sub>** even with no AC signal.  \n   - Without proper biasing, the transistor may enter the **cutoff** or **triode** region, distorting the signal.\n\n2. **Channel-Length Modulation (λ)**:  \n   - If **λ > 0**, **r<sub>o</sub>** is finite, reducing the gain slightly. For precise analysis, include **r<sub>o</sub>** in parallel with **R<sub>D</sub>**.\n\n3. **Frequency Limitations**:  \n   - The **parasitic capacitances** (C<sub>gs</sub>, C<sub>gd</sub>) limit the **bandwidth**. At high frequencies, the gain rolls off due to the **Miller effect** (capacitive feedback from drain to gate).\n\n4. **Power Consumption**:  \n   - The circuit consumes **static power** (I<sub>D</sub>·V<sub>DD</sub>), unlike CMOS logic gates (which only draw power during switching).\n\n---\n\n---\n\n---\n\n## **✅ Summary**\n- **Function**: **Voltage amplifier** with **signal inversion** (common-source configuration).  \n- **Gain**: **A<sub>v</sub> ≈ −g<sub>m</sub>R<sub>D</sub>** (for r<sub>o</sub> ≫ R<sub>D</sub>).  \n- **Input Impedance**: **Very high** (ideal for driving from high-impedance sources).  \n- **Output Impedance**: **≈ R<sub>D</sub>** (can drive moderate loads).  \n- **Key Assumption**: MOSFET must be **biased in saturation** for linear amplification.  \n\nThis circuit is a **fundamental building block** in analog IC design (e.g., in operational amplifiers, RF front-ends, and sensor interfaces). For improved performance, **biasing networks** and **compensation techniques** (e.g., cascode stages) are often added.",
        "format": "markdown",
        "sha256": "a73f411c802ad57d962ac1523b1a68b8e6198360124bb8f1cb42b6f036fa2cac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer mistakes the source input and ac-grounded gate for a common-source stage with a gate input and grounded source. Consequently, it gives the wrong input resistance and gain sign; the circuit is common-gate, with Rin ≈ 1/gm and a non-inverting gain.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 3038,
        "total_tokens": 4302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 3038,
        "total_tokens": 4302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1131,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Common-Source MOSFET Amplifier with Resistive Load**\n\nThe given circuit is a **common-source amplifier** using an **NMOS transistor (M₁)** with a **drain resistor (R_D)** and a **DC supply voltage (V_DD)**. Here’s a detailed breakdown of its operation and key characteristics:\n\n---\n\n---\n\n## **🔹 1. Circuit Configuration**\n- **Transistor Type**: NMOS (M₁)\n- **Input**: Gate of M₁ (V_in)\n- **Output**: Drain of M₁ (V_out)\n- **Source**: Grounded (assumed for NMOS)\n- **Load**: Resistor R_D between drain and V_DD\n\nThis is a **voltage amplifier** where the input signal modulates the gate-source voltage (V_GS), controlling the drain current (I_D), which in turn produces an output voltage across R_D.\n\n---\n\n---\n\n## **🔹 2. DC Biasing & Operating Region**\n### **(a) DC Behavior**\n- In **DC steady state**, V_in sets the gate-source voltage:  \n  $$\n  V_{GS} = V_{in} \\quad (\\text{since source is grounded})\n  $$\n- For the transistor to conduct (in **saturation region**), the following must hold:\n  $$\n  V_{GS} > V_{th} \\quad \\text{(threshold voltage of NMOS)}\n  $$\n  $$\n  V_{DS} = V_{out} = V_{DD} - I_D R_D > V_{GS} - V_{th}\n  $$\n  (This ensures the transistor remains in **saturation**, not triode.)\n\n- **Drain current in saturation** (square-law model):\n  $$\n  I_D = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right) (V_{GS} - V_{th})^2\n  $$\n  where:\n  - $\\mu_n$: Electron mobility\n  - $C_{ox}$: Oxide capacitance\n  - $W/L$: Transistor width-to-length ratio\n\n- **Output voltage**:\n  $$\n  V_{out} = V_{DD} - I_D R_D\n  $$\n  Substituting $I_D$:\n  $$\n  V_{out} = V_{DD} - R_D \\cdot \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right) (V_{in} - V_{th})^2\n  $$\n\n> ✅ **Key Insight**: The relationship between $V_{in}$ and $V_{out}$ is **nonlinear** due to the squared term in $I_D$. This makes the circuit suitable for **large-signal amplification** but requires **biasing** for linear small-signal operation.\n\n---\n\n### **(b) Operating Regions**\n| Region | Condition | Drain Current | Output Behavior |\n|--------|-----------|---------------|------------------|\n| **Cutoff** | $V_{GS} < V_{th}$ | $I_D = 0$ | $V_{out} = V_{DD}$ |\n| **Saturation** | $V_{GS} > V_{th}$ and $V_{DS} > V_{GS} - V_{th}$ | $I_D \\propto (V_{GS} - V_{th})^2$ | Nonlinear, used for amplification |\n| **Triode** | $V_{DS} < V_{GS} - V_{th}$ | $I_D \\propto (V_{GS} - V_{th}) V_{DS} - \\frac{1}{2} V_{DS}^2$ | Linear, but poor gain |\n\n> ⚠️ **Design Note**: To use this as a **linear amplifier**, the transistor must be **biased in saturation** (e.g., via a DC bias voltage at the gate).\n\n---\n\n---\n\n## **🔹 3. Small-Signal Analysis**\nFor **AC signals** (small variations around a DC bias point), we linearize the circuit.\n\n### **(a) Small-Signal Model**\n- Let:\n  - $V_{in} = V_{GS0} + v_{in}$ (DC bias + small AC signal)\n  - $I_D = I_{D0} + i_d$\n  - $V_{out} = V_{out0} + v_{out}$\n\n- In saturation, the **small-signal drain current** is:\n  $$\n  i_d = g_m v_{gs}\n  $$\n  where:\n  - $g_m = \\mu_n C_{ox} \\left( \\frac{W}{L} \\right) (V_{GS0} - V_{th}) = \\frac{2 I_{D0}}{V_{GS0} - V_{th}}$ (transconductance)\n\n- The **small-signal output voltage** is:\n  $$\n  v_{out} = -i_d R_D = -g_m v_{in} R_D\n  $$\n\n### **(b) Voltage Gain**\n$$\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_m R_D}\n$$\n- **Negative sign** indicates **180° phase inversion** (common-source behavior).\n- **Gain magnitude** depends on:\n  - $g_m$: Transistor parameters ($W/L$, $\\mu_n$, $C_{ox}$) and bias point.\n  - $R_D$: Load resistor value.\n\n> ✅ **Example**: If $g_m = 1\\, \\text{mA/V}$ and $R_D = 10\\, \\text{k}\\Omega$, then $A_v = -10$ (gain of 10 with inversion).\n\n---\n\n---\n\n## **🔹 4. Frequency Response & Limitations**\n- **Low-frequency behavior**: Dominated by coupling capacitors (not shown here; assumed ideal for DC analysis).\n- **High-frequency behavior**: Limited by **parasitic capacitances** (e.g., $C_{gs}$, $C_{gd}$), reducing gain at high frequencies.\n- **Input impedance**: Very high (gate is insulated), typically $> 10^{12}\\, \\Omega$.\n- **Output impedance**: $R_D$ (since the drain sees the resistor in parallel with the transistor’s output resistance $r_o$, but $r_o$ is often large and neglected in basic analysis).\n\n---\n\n---\n\n## **🔹 5. Summary of Key Characteristics**\n| Parameter | Expression | Notes |\n|-----------|------------|-------|\n| **DC Output** | $V_{out} = V_{DD} - I_D R_D$ | Nonlinear with $V_{in}$ |\n| **Drain Current (Saturation)** | $I_D = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right) (V_{in} - V_{th})^2$ | Valid for $V_{GS} > V_{th}$ |\n| **Small-Signal Gain** | $A_v = -g_m R_D$ | Linear for small signals |\n| **Transconductance** | $g_m = \\frac{2 I_{D0}}{V_{GS0} - V_{th}}$ | Depends on bias point |\n| **Input Impedance** | $\\approx \\infty$ | Gate is insulated |\n| **Output Impedance** | $\\approx R_D$ | Assuming $r_o \\gg R_D$ |\n\n---\n\n---\n\n## **🔹 6. Practical Considerations**\n- **Biasing**: To ensure saturation, a **DC bias voltage** (e.g., using a voltage divider) is often added to the gate.\n- **Load Effects**: If a load is connected at the output, the effective resistance becomes $R_D \\parallel R_L$, reducing gain.\n- **Nonlinearity**: For large signals, the output distorts due to the squared term in $I_D$. This can be mitigated by feedback or proper biasing.\n- **Power Supply**: $V_{DD}$ must be sufficiently large to allow $V_{DS} > V_{GS} - V_{th}$ for saturation.\n\n---\n\n---\n\n### **🎯 Final Conclusion**\nThis is a **common-source NMOS amplifier** with a resistive load. It provides **voltage gain** with **phase inversion**, and its performance is governed by:\n- **DC biasing** to keep the transistor in saturation,\n- **Small-signal gain** of $-g_m R_D$,\n- **Nonlinear behavior** for large input signals.\n\n> **Typical Use Case**: Low-to-mid frequency signal amplification (e.g., in analog ICs, RF front-ends, or discrete MOSFET circuits).",
        "format": "markdown",
        "sha256": "0885d237085d294682f698beb6946f567ba4bc3a66344c8a4b780d0c90641bf3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: Vin is applied to M1’s source, while its gate is DC-biased and AC-grounded. Thus this is common-gate, with approximately 1/gm input resistance and non-inverting gain, not a common-source stage with high input resistance and negative gain.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 2704,
        "total_tokens": 3968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 2704,
        "total_tokens": 3968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 826,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Common-Source Amplifier**\n\nThe provided circuit is a **common-source amplifier** using an **n-channel MOSFET (M₁)**. Below is a structured analysis covering **DC operating point**, **small-signal behavior**, and **key characteristics**.\n\n---\n\n---\n\n---\n\n## **🔹 1. Circuit Identification**\n- **MOSFET Type**: **n-channel** (source arrow points *away* from the gate, implying nMOS).\n- **Configuration**: **Common-Source Amplifier** (source is grounded, gate = input, drain = output).\n- **Components**:\n  - **R_D**: Drain resistor (load resistor).\n  - **V_DD**: DC supply voltage.\n  - **V_in**: Input voltage (gate terminal).\n  - **V_out**: Output voltage (drain terminal).\n\n> **Assumption**: The **source of M₁ is implicitly grounded** (standard for common-source amplifiers, though not explicitly shown in the diagram). This is critical for the analysis.\n\n---\n\n---\n\n---\n\n## **🔹 2. DC Analysis (Bias Point)**\nThe DC operating point (Q-point) determines whether the MOSFET operates in **cutoff**, **triode**, or **saturation** (active region for amplification).\n\n### **Key Equations**\nFor an **n-channel MOSFET in saturation** (required for linear amplification):\n$$\nI_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 \\quad \\text{(Saturation Region)}\n$$\n$$\nV_{DS} = V_{DD} - I_D R_D \\quad \\text{(KVL at drain)}\n$$\n\n### **Saturation Condition**\nThe MOSFET must satisfy:\n$$\nV_{DS} \\geq V_{GS} - V_{th}\n$$\nSubstituting $ V_{DS} = V_{DD} - I_D R_D $ and $ V_{GS} = V_{in} $ (since source is grounded):\n$$\nV_{DD} - I_D R_D \\geq V_{in} - V_{th}\n$$\n\n### **Biasing Strategy**\n- **Self-Biasing**: If $ V_{in} $ is a DC voltage (e.g., from a voltage divider), the Q-point is set by $ V_{in} $.\n- **Example**: Assume $ V_{in} = V_{GS} $, $ V_{DD} = 10\\,V $, $ R_D = 10\\,k\\Omega $, $ V_{th} = 1\\,V $, and $ \\mu_n C_{ox} \\frac{W}{L} = 1\\,mA/V^2 $.\n  - Solve for $ I_D $ and $ V_{DS} $ to ensure saturation.\n\n> **Note**: Without specific values, the DC analysis remains **qualitative**. The goal is to ensure the MOSFET operates in **saturation** for linear amplification.\n\n---\n\n---\n\n---\n\n## **🔹 3. Small-Signal Analysis**\nFor **AC signals** (e.g., $ v_{in} $), we analyze the circuit using the **small-signal model** of the MOSFET.\n\n### **Small-Signal Model of M₁**\n- **Transconductance**: $ g_m = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} I_D} $ (or $ g_m = 2 I_D / (V_{GS} - V_{th}) $).\n- **Output Resistance**: $ r_o = \\frac{1}{\\lambda I_D} $ (if channel-length modulation is considered, where $ \\lambda $ is the channel-length modulation parameter).\n\n### **Voltage Gain ($ A_v $)**\nAssuming $ r_o \\gg R_D $ (neglecting channel-length modulation):\n$$\nA_v = \\frac{v_{out}}{v_{in}} = -g_m R_D\n$$\n- **Negative sign**: Indicates **180° phase inversion** (input and output are out of phase).\n- **Magnitude**: $ |A_v| = g_m R_D $. Higher $ R_D $ or $ g_m $ increases gain.\n\n### **Input Resistance ($ R_{in} $)**\n- The **gate of a MOSFET** is insulated (oxide layer), so:\n  $$\n  R_{in} \\approx \\infty \\quad \\text{(Ideal case)}\n  $$\n  (In practice, $ R_{in} $ is very high, ~$ 10^{12} \\Omega $).\n\n### **Output Resistance ($ R_{out} $)**\n- Without channel-length modulation ($ r_o \\to \\infty $):\n  $$\n  R_{out} = R_D\n  $$\n- With channel-length modulation:\n  $$\n  R_{out} = R_D \\parallel r_o \\approx R_D \\quad \\text{(if } r_o \\gg R_D)\n  $$\n\n---\n\n---\n\n---\n\n## **🔹 4. Key Characteristics Summary**\n| **Parameter**       | **Value**                          | **Notes**                                  |\n|----------------------|------------------------------------|--------------------------------------------|\n| **Voltage Gain**     | $ A_v = -g_m R_D $               | Inverts signal; gain depends on $ g_m $ and $ R_D $. |\n| **Input Resistance** | $ R_{in} \\approx \\infty $       | High input impedance (good for signal sources). |\n| **Output Resistance**| $ R_{out} \\approx R_D $          | Medium output impedance.                   |\n| **Frequency Response**| Limited by **parasitic capacitances** (e.g., $ C_{gs}, C_{gd} $). | Higher frequencies reduce gain due to capacitive coupling. |\n| **Operating Region** | **Saturation** (for amplification) | Must ensure $ V_{DS} \\geq V_{GS} - V_{th} $. |\n\n---\n\n---\n\n---\n\n## **🔹 5. Limitations & Considerations**\n1. **Nonlinearity**:\n   - The MOSFET’s $ I_D $ vs. $ V_{GS} $ is **quadratic**, causing **harmonic distortion** for large input signals.\n   - To minimize distortion, keep $ v_{in} $ small (small-signal approximation).\n\n2. **Channel-Length Modulation**:\n   - If $ \\lambda \\neq 0 $, $ I_D $ increases slightly with $ V_{DS} $, reducing output resistance and gain.\n   - Modified gain: $ A_v = -g_m (R_D \\parallel r_o) $.\n\n3. **Bias Stability**:\n   - Temperature and process variations can shift the Q-point. **Feedback biasing** (e.g., source resistor) is often used in practice to stabilize the bias.\n\n4. **Frequency Limits**:\n   - **Miller Effect**: $ C_{gd} $ appears as $ (1 + |A_v|) C_{gd} $ at the input, reducing the **upper cutoff frequency**.\n   - **Lower cutoff frequency** is determined by coupling/ bypass capacitors (not shown in this circuit).\n\n---\n\n---\n\n---\n\n## **🔹 6. Practical Example**\nAssume:\n- $ V_{DD} = 10\\,V $, $ R_D = 10\\,k\\Omega $,\n- $ V_{th} = 1\\,V $, $ \\mu_n C_{ox} \\frac{W}{L} = 1\\,mA/V^2 $,\n- $ V_{GS} = 2\\,V $ (DC bias).\n\n**DC Analysis**:\n- $ I_D = \\frac{1}{2} \\cdot 1 \\cdot (2 - 1)^2 = 0.5\\,mA $.\n- $ V_{DS} = 10 - (0.5 \\times 10^{-3} \\cdot 10 \\times 10^3) = 5\\,V $.\n- Check saturation: $ V_{DS} = 5\\,V \\geq V_{GS} - V_{th} = 1\\,V $ → **Valid**.\n\n**Small-Signal Analysis**:\n- $ g_m = 2 I_D / (V_{GS} - V_{th}) = 2 \\cdot 0.5 / 1 = 1\\,mS $.\n- $ A_v = -g_m R_D = -1 \\times 10^{-3} \\cdot 10 \\times 10^3 = -10 $ (gain of 10 with inversion).\n\n---\n\n---\n\n---\n\n## **🔹 Conclusion**\nThe circuit is a **common-source amplifier** with the following properties:\n✅ **High input impedance** (ideal for weak signal sources).\n✅ **Moderate voltage gain** ($ |A_v| = g_m R_D $).\n✅ **Signal inversion** (180° phase shift).\n✅ **Requires proper biasing** to ensure MOSFET operates in **saturation**.\n\n**Key Design Trade-offs**:\n- Higher $ R_D $ → Higher gain but lower $ V_{DS} $ (risk of leaving saturation).\n- Higher $ g_m $ (via larger $ I_D $ or $ W/L $) → Higher gain but more power consumption.\n\n> **For a complete analysis**, specific values for $ V_{DD} $, $ R_D $, MOSFET parameters ($ V_{th}, \\mu_n C_{ox}, W/L $), and input signal amplitude are required. The above provides a **general framework** for understanding the circuit’s behavior.",
        "format": "markdown",
        "sha256": "8268a01b9dd1ee448aa3e6b9300567f7dcb259f4b8ca4b694b453e83a059839a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source-input, gate-biased common-gate stage as a common-source stage. Consequently, its assumed connections, gain sign, and input resistance are all wrong for this circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 5142,
        "total_tokens": 6406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1264,
        "output_tokens": 5142,
        "total_tokens": 6406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3123,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Common-Source MOSFET Amplifier**\n\nThe given circuit is a **common-source amplifier** with **AC coupling** at the input and **DC biasing** at the source. Below is a detailed breakdown of its behavior, operating principles, and key performance metrics.\n\n---\n\n---\n\n## **🔹 Circuit Configuration**\n- **Input**: AC signal $ V_{\\text{in}} $ applied through coupling capacitor $ C_1 $ to the **gate** of MOSFET $ M_1 $.\n- **MOSFET $ M_1 $**: Assumed to be an **n-channel enhancement-mode MOSFET** (arrow on the source indicates n-type).\n- **Source Bias**: Connected to a DC voltage $ V_b $, which sets the **DC operating point** (Q-point).\n- **Drain Resistor**: $ R_D $ connected between the drain and $ V_{DD} $.\n- **Output**: $ V_{\\text{out}} $ taken from the drain node (after $ R_D $).\n- **Power Supply**: $ V_{DD} $ provides the drain current path.\n\n---\n\n---\n\n## **🔹 DC Operating Point (Q-Point)**\nTo ensure the MOSFET operates in **saturation** (active region for amplification), the following must hold:\n1. **Gate-Source Voltage ($ V_{GS} $)**:\n   - Since $ C_1 $ blocks DC, the **DC gate voltage** is not directly specified in the diagram. In practice, a **bias network** (e.g., resistor divider) would be required to set $ V_{GS} $, but it is omitted here.\n   - Assuming proper biasing, $ V_{GS} > V_{th} $ (threshold voltage) for n-channel MOSFET.\n\n2. **Source Voltage**:\n   - The source is tied to $ V_b $, so $ V_{S} = V_b $.\n   - Thus, $ V_{GS} = V_G - V_b $, where $ V_G $ is the DC gate voltage (assumed to be set externally).\n\n3. **Drain-Source Voltage ($ V_{DS} $)**:\n   - $ V_{DS} = V_D - V_S = (V_{DD} - I_D R_D) - V_b $\n   - For **saturation**, $ V_{DS} \\geq V_{GS} - V_{th} $.\n\n4. **Drain Current ($ I_D $)**:\n   - In saturation, $ I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 $.\n   - Alternatively, if $ R_D $ is known, $ I_D = \\frac{V_{DD} - V_{DS} - V_b}{R_D} $.\n\n---\n\n---\n\n## **🔹 AC Small-Signal Analysis**\n### **1. Input Coupling Capacitor $ C_1 $**\n- **Blocks DC**: Prevents $ V_{\\text{in}} $ from affecting the MOSFET’s DC bias.\n- **Passes AC**: At signal frequencies, $ C_1 $ acts as a **short circuit** (assuming $ f \\gg \\frac{1}{2\\pi R_{\\text{in}} C_1} $).\n\n### **2. Small-Signal Model**\n- The **source** is connected to $ V_b $, a **DC voltage source**, which has **zero AC impedance**.\n  - ⇒ **Source is at AC ground** (no source degeneration for AC signals).\n- The **gate** sees the AC input $ v_{in} $ (after $ C_1 $).\n- The **drain** is connected to $ R_D $, which forms the load.\n\n#### **Small-Signal Parameters**\n- **Transconductance ($ g_m $)**:\n  $$\n  g_m = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} I_D} \\quad \\text{(for saturation)}\n  $$\n  or equivalently:\n  $$\n  g_m = \\frac{2 I_D}{V_{GS} - V_{th}}\n  $$\n\n- **Output Resistance ($ r_o $)**:\n  $$\n  r_o = \\frac{1}{\\lambda I_D} \\quad \\text{(channel-length modulation)}\n  $$\n  (If $ \\lambda \\approx 0 $, $ r_o \\to \\infty $)\n\n---\n\n### **3. Voltage Gain ($ A_v $)**\nFor a **common-source amplifier with source at AC ground**:\n$$\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_m R_D \\quad \\text{(if } r_o \\gg R_D \\text{)}\n$$\n- **Negative sign**: Indicates **180° phase inversion** (common-source behavior).\n- **Magnitude**: Depends on $ g_m $ and $ R_D $.\n  - Higher $ g_m $ (larger $ I_D $ or $ W/L $) → Higher gain.\n  - Larger $ R_D $ → Higher gain (but limited by $ V_{DD} $ and $ r_o $).\n\nIf $ r_o $ is finite:\n$$\nA_v = -g_m (R_D \\parallel r_o)\n$$\n\n---\n\n### **4. Input and Output Impedances**\n- **Input Impedance ($ Z_{\\text{in}} $)**:\n  - Gate of MOSFET has **very high impedance** (ideally infinite for small-signal analysis).\n  - $ Z_{\\text{in}} \\approx \\infty $ (due to $ C_1 $ and MOSFET gate capacitance being negligible at low frequencies).\n\n- **Output Impedance ($ Z_{\\text{out}} $)**:\n  - $ Z_{\\text{out}} = R_D \\parallel r_o $\n  - If $ r_o \\gg R_D $, then $ Z_{\\text{out}} \\approx R_D $.\n\n---\n\n---\n\n## **🔹 Frequency Response**\n- **Low-Frequency Cutoff ($ f_L $)**:\n  - Determined by $ C_1 $ and the **input resistance** (which is very high, so $ f_L \\approx 0 $ in ideal cases).\n  - In practice, $ f_L = \\frac{1}{2\\pi R_{\\text{in}} C_1} $, where $ R_{\\text{in}} $ is the Thevenin resistance seen by $ C_1 $.\n\n- **High-Frequency Cutoff ($ f_H $)**:\n  - Limited by **parasitic capacitances** (e.g., $ C_{GS}, C_{GD} $) and $ R_D $.\n  - $ f_H \\approx \\frac{1}{2\\pi R_D (C_{GD} + C_{DB})} $ (simplified).\n\n---\n\n---\n\n## **🔹 Key Observations**\n| **Parameter**       | **Value/Expression**                     | **Notes**                                  |\n|----------------------|------------------------------------------|--------------------------------------------|\n| **DC Bias**          | $ V_b $ sets $ V_S $                    | Ensures $ V_{GS} > V_{th} $ for saturation |\n| **AC Gain**          | $ A_v = -g_m R_D $                      | Phase inversion; magnitude depends on $ g_m $ |\n| **Input Impedance**  | $ \\approx \\infty $                      | Due to MOSFET gate                         |\n| **Output Impedance** | $ R_D \\parallel r_o $                   | $ r_o $ often dominates if $ \\lambda \\neq 0 $ |\n| **Frequency Range**  | $ f_L \\approx 0 $, $ f_H $ limited by $ C_{GD} $ | AC-coupled, so no DC gain |\n\n---\n\n---\n\n## **🔹 Practical Considerations**\n1. **Biasing Stability**:\n   - The circuit lacks a **DC path to the gate**, which is unrealistic. In practice, a **resistor divider** or **current mirror** would bias the gate to set $ V_{GS} $.\n\n2. **Source Degeneration**:\n   - If $ V_b $ were replaced with a **resistor $ R_S $**, the circuit would have **source degeneration**, reducing gain but improving linearity and stability.\n   - Here, $ V_b $ is a **voltage source**, so **no source degeneration** for AC signals.\n\n3. **Output Swing**:\n   - The maximum undistorted output swing is limited by:\n     - $ V_{\\text{out, max}} = V_{DD} - I_D R_D $\n     - $ V_{\\text{out, min}} = V_b + V_{DS,\\text{sat}} $\n\n4. **Temperature and Process Variations**:\n   - $ V_{th} $ and $ \\mu_n C_{ox} $ vary with temperature and fabrication, affecting $ I_D $ and $ g_m $.\n   - **Feedback** (not present here) can stabilize the Q-point.\n\n---\n\n---\n\n## **🔹 Summary**\nThis is a **common-source MOSFET amplifier** with:\n- **AC coupling** at the input ($ C_1 $),\n- **DC biasing** at the source ($ V_b $),\n- **Voltage gain** $ A_v = -g_m R_D $,\n- **High input impedance**, **moderate output impedance**,\n- **Phase inversion** of the input signal.\n\n### **📌 Final Answer**\nThe circuit is a **common-source MOSFET amplifier** with AC coupling. It amplifies AC signals from $ V_{\\text{in}} $ with a **voltage gain of $ A_v = -g_m R_D $**, where $ g_m $ is the transistor’s transconductance. The **source is biased at $ V_b $** to set the DC operating point, and the **output is taken from the drain** through $ R_D $. The circuit provides **high input impedance**, **phase inversion**, and **no DC gain** due to $ C_1 $. Proper biasing (e.g., via a gate resistor network) is required in practice to ensure the MOSFET operates in saturation.",
        "format": "markdown",
        "sha256": "0fb1776a068eb97e83124d392fffc4e32d55c1abb5dd682f6a7412f237f8459f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology, placing the input at the gate and treating the source as biased by Vb. It misses that the input is connected to a source node hard-shorted to ground, so the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 4644,
        "total_tokens": 6588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 4644,
        "total_tokens": 6588,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure is a **PMOS-based common-drain (source-follower) amplifier** with AC coupling and body biasing. Below is a detailed analysis of its structure, behavior, and key characteristics.\n\n---\n\n---\n\n### **🔍 Circuit Overview**\n- **Transistor Type**: $ M_1 $ is a **PMOS** (arrow on the source points inward, indicating p-channel).\n- **Configuration**: **Common-drain (source-follower)**.\n  - **Input**: AC signal $ V_{\\text{in}} $, coupled via capacitor $ C_1 $ to the gate of $ M_1 $.\n  - **Output**: $ V_{\\text{out}} $ at the **source** of $ M_1 $.\n  - **Drain**: Connected to **ground** (AC ground).\n  - **Source**: Connected to pull-up resistor $ R_D $ and $ V_{DD} $.\n  - **Body (Substrate)**: Biased with $ V_b $.\n\n---\n\n---\n\n### **⚙️ Key Components & Roles**\n| Component | Role |\n|-----------|------|\n| $ V_{DD} $ | Positive power supply (e.g., +5V, +3.3V). |\n| $ R_D $ | Pull-up resistor for the source, setting DC bias and load resistance. |\n| $ C_1 $ | **Coupling capacitor**: Blocks DC, passes AC signals (high-pass filter). |\n| $ M_1 $ | PMOS transistor (active device for amplification/buffering). |\n| $ V_b $ | **Body bias**: Adjusts threshold voltage ($ V_{th} $) via body effect. |\n\n---\n\n---\n\n### **📊 DC Analysis (Biasing)**\n#### **Assumptions**:\n- The gate DC bias is **not explicitly shown** in the diagram. In practice, a resistor (e.g., from gate to $ V_{DD} $ or ground) or a bias network would be required to set $ V_G $.\n- For PMOS, the transistor conducts when $ V_{SG} \\geq |V_{th}| $, where:\n  - $ V_{SG} = V_S - V_G $,\n  - $ V_S = V_{\\text{out}} $ (source voltage),\n  - $ V_G $ = Gate voltage (DC bias + AC signal).\n\n#### **DC Operating Point**:\n1. **Current through $ R_D $**:\n   $$\n   I_{R_D} = \\frac{V_{DD} - V_{\\text{out}}}{R_D}\n   $$\n2. **Drain current of $ M_1 $** (in saturation):\n   $$\n   I_D = \\frac{1}{2} \\mu_p C_{ox} \\frac{W}{L} (V_{SG} - |V_{th}|)^2 (1 + \\lambda V_{SD})\n   $$\n   where:\n   - $ V_{SD} = V_{\\text{out}} - 0 = V_{\\text{out}} $ (drain-to-source voltage),\n   - $ \\lambda $ = Channel-length modulation parameter,\n   - $ V_{th} $ = Threshold voltage (affected by body bias $ V_b $).\n\n3. **DC Balance**:\n   $$\n   I_{R_D} = I_D \\quad \\Rightarrow \\quad \\frac{V_{DD} - V_{\\text{out}}}{R_D} = \\text{Saturation current equation}\n   $$\n   This equation determines $ V_{\\text{out}} $ (DC bias point) **if $ V_G $ is known**.\n\n#### **Body Effect**:\n- The threshold voltage $ V_{th} $ depends on the **source-to-body voltage** $ V_{SB} = V_{\\text{out}} - V_b $:\n  $$\n  V_{th} = V_{th0} + \\gamma \\left( \\sqrt{2|\\phi_F| + V_{SB}} - \\sqrt{2|\\phi_F|} \\right)\n  $$\n  where $ \\gamma $ is the body-effect coefficient. Adjusting $ V_b $ tunes $ V_{th} $, which impacts biasing and gain.\n\n---\n\n---\n\n### **📈 AC Analysis (Small-Signal Behavior)**\n#### **1. Input Coupling (High-Pass Filter)**\n- $ C_1 $ and the **gate input resistance** (very high for MOSFETs, $ R_{\\text{in}} \\to \\infty $) form a high-pass filter:\n  $$\n  f_c = \\frac{1}{2\\pi C_1 R_{\\text{in}}} \\approx 0 \\quad (\\text{ideal case})\n  $$\n  - **Practical implication**: Blocks DC, passes AC signals with minimal attenuation at frequencies $ f \\gg f_c $.\n\n#### **2. Small-Signal Model**\n- **Configuration**: Common-drain (source-follower).\n- **Key Parameters**:\n  - **Transconductance**: $ g_m = \\frac{\\partial I_D}{\\partial V_{SG}} $ (positive for PMOS).\n  - **Output conductance**: $ g_{ds} = \\frac{\\partial I_D}{\\partial V_{SD}} $ (small, often neglected).\n  - **Load resistance**: $ R_D $ (from source to $ V_{DD} $, which is AC ground).\n\n#### **3. Voltage Gain**\nFor a source-follower:\n$$\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m R_L}{1 + g_m R_L + g_{ds} R_L} \\approx \\frac{g_m R_D}{1 + g_m R_D} \\quad (\\text{if } g_{ds} \\ll g_m)\n$$\n- **Typical behavior**:\n  - Gain $ \\approx 1 $ (but **< 1** due to $ R_D $ and body effect).\n  - **Non-inverting**: $ v_{\\text{out}} $ follows $ v_{\\text{in}} $ with minimal phase shift.\n  - **Unity gain buffer**: Useful for impedance matching.\n\n#### **4. Input/Output Impedance**\n| Parameter | Value | Notes |\n|-----------|-------|-------|\n| **Input Impedance** | $ \\approx \\infty $ | Gate is isolated (MOSFET property). |\n| **Output Impedance** | $ \\approx \\frac{1}{g_m} \\parallel R_D $ | Low (e.g., $ 10^2–10^4 \\ \\Omega $). |\n\n---\n\n---\n\n### **🎯 Key Characteristics**\n| Feature | Explanation |\n|---------|-------------|\n| **Unity Gain** | Output voltage closely tracks input (with slight attenuation). |\n| **High Input Impedance** | Minimal loading on the previous stage. |\n| **Low Output Impedance** | Can drive low-impedance loads (e.g., next amplifier stage). |\n| **AC Coupling** | Blocks DC offsets, passes AC signals (high-pass filter). |\n| **Body Bias Tuning** | $ V_b $ adjusts $ V_{th} $, enabling dynamic control of $ g_m $ and biasing. |\n| **Stability** | No voltage gain > 1, so no feedback stability issues (inherently stable). |\n\n---\n\n---\n\n### **⚠️ Practical Considerations**\n1. **DC Biasing**:\n   - The circuit **lacks a DC path for the gate**. In practice, add a resistor (e.g., $ R_G $) from gate to $ V_{DD} $ or a bias voltage to set $ V_G $.\n   - Without proper biasing, $ M_1 $ may operate in cutoff or triode region, degrading performance.\n\n2. **Body Effect Impact**:\n   - If $ V_b \\neq V_{DD} $, the body effect modifies $ V_{th} $, which can:\n     - Shift the operating point.\n     - Reduce $ g_m $ (lowering gain).\n     - Introduce nonlinearity.\n\n3. **Frequency Response**:\n   - **Lower cutoff frequency**: $ f_c = \\frac{1}{2\\pi C_1 R_{\\text{in}}} $ (very low due to high $ R_{\\text{in}} $).\n   - **Upper cutoff frequency**: Limited by $ M_1 $’s $ f_T $ and parasitic capacitances.\n\n4. **Noise**:\n   - Source-followers have **low noise** due to high input impedance and unity gain.\n\n---\n\n---\n\n### **🔧 Applications**\n- **Buffer/Isolation Stage**: Connects high-impedance sources (e.g., sensors) to low-impedance loads.\n- **Impedance Matching**: Reduces loading effects in multi-stage amplifiers.\n- **DC Offset Removal**: AC coupling ($ C_1 $) blocks DC offsets between stages.\n- **Body-Biased Circuits**: Used in adaptive biasing or low-power designs (e.g., to reduce leakage).\n\n---\n\n---\n\n### **📌 Summary**\n| **Aspect**          | **Description**                                                                 |\n|----------------------|---------------------------------------------------------------------------------|\n| **Type**             | PMOS common-drain (source-follower) amplifier with AC coupling.                 |\n| **Gain**             | $ \\approx 1 $ (slightly < 1 due to $ R_D $ and body effect).                   |\n| **Input Impedance**  | Very high ($ \\to \\infty $).                                                    |\n| **Output Impedance** | Low ($ \\approx 1/g_m \\parallel R_D $).                                         |\n| **Frequency Response** | High-pass (due to $ C_1 $), flat gain for $ f \\gg f_c $.                     |\n| **Biasing**          | Requires external DC path for gate (not shown in diagram).                     |\n| **Body Bias ($ V_b $)** | Adjusts $ V_{th} $, enabling dynamic control of transistor behavior.          |\n\n---\n\n**Final Note**: This circuit is a **voltage buffer** with high input impedance and low output impedance, ideal for signal conditioning in analog systems. Ensure proper DC biasing (e.g., add a gate resistor) for real-world implementation. The body bias $ V_b $ offers additional tunability for advanced applications.",
        "format": "markdown",
        "sha256": "b0061a8174bf633867f27a084e894e5bcbe51680e7df060d1be47feb6d502324"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology, placing the input at the gate and output at the source, and misses that the actual input node is shorted to ground. Its source-follower gain conclusion is therefore incorrect.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 8050,
        "total_tokens": 9994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 8050,
        "total_tokens": 9994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: PMOS Common-Source Amplifier**\n\nThe provided circuit is a **PMOS common-source amplifier** with the following key components and behavior:\n\n---\n\n---\n\n### **🔹 Circuit Configuration**\n- **Transistor**: $ M_1 $ (PMOS)\n- **Input**: AC signal $ V_{\\text{in}} $ coupled via capacitor $ C_1 $\n- **Output**: $ V_{\\text{out}} $ at the drain of $ M_1 $\n- **Biasing**: \n  - Source of $ M_1 $ is biased at $ V_b $ (DC voltage)\n  - Drain connected to $ V_{DD} $ via resistor $ R_D $\n\nThis is a **common-source configuration** because:\n- The **source** is the common terminal for input (gate) and output (drain).\n- The **gate** receives the input signal $ V_{\\text{in}} $, and the **drain** provides the output $ V_{\\text{out}} $.\n\n---\n\n---\n\n### **🔹 DC Operating Point**\n- **Capacitor $ C_1 $** blocks DC, so the gate's DC voltage is determined by the bias network (not explicitly shown in the diagram). For proper operation, $ V_b $ must be set such that $ M_1 $ operates in **saturation**.\n- **Saturation condition for PMOS**:\n  $$\n  V_{SD} \\geq V_{SG} + |V_{th}| \\quad \\text{(where } V_{SG} = V_b - V_G \\text{)}\n  $$\n  Here, $ V_{SD} = V_b - V_{\\text{out}} $, and $ V_{SG} = V_b - V_G $. The DC bias ensures $ V_{SG} > |V_{th}| $, placing $ M_1 $ in saturation.\n\n---\n\n---\n\n### **🔹 Small-Signal Analysis**\n#### **1. Small-Signal Model**\n- Replace $ M_1 $ with its small-signal equivalent:\n  - Transconductance: $ g_m = \\frac{\\partial I_D}{\\partial V_{SG}} $\n  - Output resistance: $ r_o = \\frac{1}{g_{ds}} $ (due to channel-length modulation)\n- **Coupling capacitor $ C_1 $** acts as a short for AC signals.\n- **Gate voltage**: $ v_g = v_{\\text{in}} $ (small-signal)\n- **Source voltage**: $ v_s = 0 $ (since $ V_b $ is DC)\n\n#### **2. Voltage Gain**\nUsing KCL at the drain node:\n$$\ni_d = -g_m v_{sg} - \\frac{v_{\\text{out}}}{r_o}\n$$\nWhere:\n- $ v_{sg} = v_s - v_g = -v_{\\text{in}} $\n- $ i_d = -\\frac{v_{\\text{out}}}{R_D} $ (from $ R_D $)\n\nSubstitute into KCL:\n$$\n-\\frac{v_{\\text{out}}}{R_D} = g_m v_{\\text{in}} - \\frac{v_{\\text{out}}}{r_o}\n$$\nSolving for $ v_{\\text{out}} $:\n$$\nv_{\\text{out}} \\left( \\frac{1}{R_D} + \\frac{1}{r_o} \\right) = g_m v_{\\text{in}}\n$$\n$$\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = \\frac{g_m}{ \\frac{1}{R_D} + \\frac{1}{r_o} } = g_m (R_D \\parallel r_o)\n$$\n\n**Simplified Case** (if $ r_o \\gg R_D $):\n$$\nA_v \\approx g_m R_D\n$$\n\n#### **3. Sign of Gain**\n- For **PMOS**, an increase in $ v_{\\text{in}} $ (more positive gate voltage) reduces $ V_{SG} $, decreasing $ I_D $.\n- Lower $ I_D $ reduces the voltage drop across $ R_D $, increasing $ V_{\\text{out}} $.\n- **Result**: $ A_v > 0 $ (positive gain), unlike NMOS common-source amplifiers (which have negative gain).\n\n---\n\n---\n\n### **🔹 Key Characteristics**\n| Parameter          | Value                                                                 |\n|--------------------|-----------------------------------------------------------------------|\n| **Input Impedance** | $ Z_{\\text{in}} \\approx \\frac{1}{j\\omega C_1} + \\infty $ (gate has very high impedance) |\n| **Output Impedance** | $ Z_{\\text{out}} \\approx R_D \\parallel r_o \\approx R_D $ (if $ r_o \\gg R_D $) |\n| **Voltage Gain**   | $ A_v \\approx g_m R_D $ (positive)                                      |\n| **Frequency Response** | High-pass due to $ C_1 $ (blocks DC, passes AC)                     |\n\n---\n\n---\n\n### **🔹 Summary**\n- **Type**: PMOS common-source amplifier with AC coupling.\n- **Purpose**: Amplifies AC signals while blocking DC.\n- **Gain**: Positive, approximately $ g_m R_D $ (assuming $ r_o \\gg R_D $).\n- **Biasing**: $ V_b $ sets the DC operating point to ensure $ M_1 $ is in saturation.\n- **Input/Output**: High input impedance (due to $ C_1 $ and MOSFET gate), moderate output impedance ($ R_D $).\n\nThis circuit is suitable for applications requiring **non-inverting amplification** of AC signals, such as in audio preamplifiers or signal conditioning stages. Proper biasing of $ V_b $ is critical to maintain $ M_1 $ in saturation for linear operation.",
        "format": "markdown",
        "sha256": "162d23986960b71ffa19d767b42af3bf42ba034d9fc18ddfb74703e49b0ebe6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the connections, placing the input at the gate and the bias at the source. It misses that Vin is applied to the source node hard-shorted to ground, so the ideal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 4541,
        "total_tokens": 6485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 4541,
        "total_tokens": 6485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3318,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given MOSFET amplifier circuit, we need to identify the reactive components, which are the capacitors. Each capacitor in the circuit can contribute a pole to the frequency response. The circuit diagram includes the following capacitors:\n\n- \\( C_{GD} \\): Capacitor between the gate and drain.\n- \\( C_{GS} \\): Capacitor between the gate and source.\n- \\( C_{SB} \\): Capacitor between the source and body (substrate).\n- \\( C_{DB} \\): Capacitor between the drain and body (substrate).\n\nEach of these capacitors is connected to different nodes in the circuit and is independent of the others. In the context of small-signal analysis, each capacitor can form a pole with the resistances in the circuit. For example, \\( C_{GS} \\) forms a pole with the resistance seen from the gate to the source, \\( C_{GD} \\) forms a pole with the resistance between the gate and drain, \\( C_{SB} \\) forms a pole with the source resistor \\( R_S \\), and \\( C_{DB} \\) forms a pole with the drain resistor \\( R_D \\).\n\nSince there are four independent capacitors in the circuit, each contributing a pole, the total number of poles in the circuit is four.\n\nTherefore, the number of poles in the circuit is 4.",
        "format": "markdown",
        "sha256": "4e51974b2722cc53e521d832234477efa137d4621d7634d10b8679860e6b93cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly counts one pole per capacitor and treats all four as independent. In fact, CSB has both terminals grounded, and the remaining capacitor voltages are not all independent, so the circuit has two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2169,
        "output_tokens": 3330,
        "total_tokens": 5499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2169,
        "output_tokens": 3330,
        "total_tokens": 5499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given MOSFET amplifier circuit, we need to analyze the small-signal model of the circuit. The circuit includes a MOSFET with its intrinsic capacitances (C_GS, C_GD, C_SB, C_DB) and resistors (R_S, R_D).\n\n1. **Identify Reactive Elements**: The circuit has four capacitors: C_GS, C_GD, C_SB, and C_DB. Each capacitor can potentially contribute a pole to the circuit's transfer function.\n\n2. **Small-Signal Model**: In the small-signal model, the MOSFET is represented by its transconductance \\( g_m \\) and the intrinsic capacitances. The transconductance \\( g_m \\) introduces a dependent current source, which affects the circuit's behavior.\n\n3. **Dependent Source Impact**: The presence of the dependent source \\( g_m \\) can reduce the number of independent energy storage elements. In a circuit with \\( n \\) reactive elements and \\( m \\) dependent sources, the number of poles can be less than \\( n \\). Here, with one dependent source, the number of poles is \\( n - 1 \\).\n\n4. **Counting Poles**: Given that there are four capacitors (reactive elements) and one dependent source (g_m), the number of poles is \\( 4 - 1 = 3 \\).\n\nTherefore, the circuit has **3 poles**.",
        "format": "markdown",
        "sha256": "493e461d9050a824ee881a396820cbfc298f2f5151b29191c51170613f3a08e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion of three poles is wrong. A dependent source does not generally reduce the pole count by one; here CSB is shorted because its terminals are grounded, and CGS, CGD, and CDB have only two independent capacitor voltages, giving two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2169,
        "output_tokens": 18984,
        "total_tokens": 21153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2169,
        "output_tokens": 18984,
        "total_tokens": 21153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18688,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the reactive elements present. In the context of circuit analysis, poles are the frequencies at which the transfer function of the circuit goes to infinity. Each reactive element, such as a capacitor, can contribute to a pole, depending on its configuration and independence.\n\nIn the provided circuit, we have a common-source amplifier with a MOSFET (M1) and several capacitors: C_GS, C_SB, C_DB, and C_GD. These capacitors are connected between different nodes of the circuit, and each one can store energy independently.\n\n- **C_GS**: Connects the gate to the source.\n- **C_SB**: Connects the source to the body (substrate).\n- **C_DB**: Connects the drain to the body.\n- **C_GD**: Connects the gate to the drain.\n\nGiven that the body is typically connected to ground in a MOSFET, C_SB and C_DB can be considered as capacitors from the source and drain to ground, respectively. This means that each of these capacitors is connected between different nodes and does not share a common voltage with another capacitor in a way that would reduce the number of independent energy storage elements.\n\nSince there are four capacitors in the circuit, and each capacitor can contribute a pole, the circuit has four poles. This is because each capacitor introduces a factor of \\( s \\) in the impedance, leading to a fourth-order polynomial in the characteristic equation, which corresponds to four poles.\n\nTherefore, the number of poles in the circuit is four.",
        "format": "markdown",
        "sha256": "27cffcd0e45ec7a8f8c348dacaed144e49f6cc3f50958bb4badfe66dbe1a9e86"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly counts four poles by treating every capacitor as an independent energy-storage element. With the source grounded, C_SB is shorted out, and the remaining capacitor voltages are not all independent; the circuit has two poles. It shows limited relevant understanding by identifying the capacitors and grounding the body.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2169,
        "output_tokens": 6319,
        "total_tokens": 8488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2169,
        "output_tokens": 6319,
        "total_tokens": 8488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Feedback Amplifier with MOSFET and Voltage Divider**\n\n---\n\n#### **🔹 Circuit Overview**\nThe given circuit is a **non-inverting feedback amplifier** using a **MOSFET (M₁)** as the active device. The key components are:\n- **M₁**: Likely an **NMOS transistor** (arrow on source points outward).\n- **R_D**: Load resistor connected between **V<sub>DD</sub>** and the **drain of M₁**.\n- **R₁, R₂**: Form a **voltage divider** that samples the output voltage **V<sub>out</sub>** and feeds it back to the **source of M₁** (labeled **V<sub>F</sub>**).\n- **V<sub>in</sub>**: Input signal applied to the **gate of M₁**.\n- **V<sub>out</sub>**: Output voltage taken from the junction of **R₁** and **R₂**.\n\nThis configuration resembles a **series-shunt feedback amplifier**, where:\n- **Series feedback** is applied at the input (gate-source voltage is controlled).\n- **Shunt feedback** is applied at the output (voltage divider samples **V<sub>out</sub>**).\n\n---\n\n---\n\n## **🔹 DC Analysis (Biasing)**\n\n### **Assumptions**\n- M₁ operates in **saturation region** (typical for amplifiers).\n- **V<sub>F</sub>** = Voltage at the **source of M₁** = **V<sub>out</sub> × (R₂ / (R₁ + R₂))**  \n  (from the voltage divider: **V<sub>F</sub> = β V<sub>out</sub>**, where **β = R₂ / (R₁ + R₂)**).\n\n### **Key Equations**\n1. **Gate-Source Voltage**:\n   $$\n   V_{GS} = V_{in} - V_F = V_{in} - \\beta V_{out}\n   $$\n2. **Drain Current (Saturation)**:\n   $$\n   I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2\n   $$\n3. **Drain Voltage**:\n   $$\n   V_D = V_{DD} - I_D R_D\n   $$\n   Since **V<sub>out</sub>** is the voltage across **R₂**, and **R₁** and **R₂** form a divider from **V<sub>D</sub>** to ground:\n   $$\n   V_{out} = V_D \\cdot \\frac{R_2}{R_1 + R_2} = \\beta V_D\n   $$\n   Substituting **V<sub>D</sub>**:\n   $$\n   V_{out} = \\beta (V_{DD} - I_D R_D)\n   $$\n\n### **DC Operating Point**\nSubstitute **I<sub>D</sub>** into the **V<sub>out</sub>** equation:\n$$\nV_{out} = \\beta \\left( V_{DD} - \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} R_D (V_{in} - \\beta V_{out} - V_{th})^2 \\right)\n$$\nThis is a **nonlinear equation** in **V<sub>out</sub>**, but for **large feedback (β ≈ 1)**, the circuit stabilizes **V<sub>out</sub>** to a value where:\n$$\nV_{GS} \\approx V_{th} + \\sqrt{\\frac{2 I_D}{\\mu_n C_{ox} (W/L)}}\n$$\n- **V<sub>in</sub>** must be chosen such that **V<sub>GS</sub> > V<sub>th</sub>** to ensure saturation.\n\n---\n\n---\n\n## **🔹 Small-Signal Analysis (AC Behavior)**\n\n### **Feedback Factor**\n$$\n\\beta = \\frac{R_2}{R_1 + R_2}\n$$\n\n### **Open-Loop Gain (A<sub>OL</sub>)**\nFor a **common-source amplifier** with load **R<sub>D</sub>** and **r<sub>o</sub> ≫ R<sub>D</sub>** (neglecting channel-length modulation):\n$$\nA_{OL} = -g_m R_D\n$$\nwhere **g<sub>m</sub> = √(2 μ<sub>n</sub> C<sub>ox</sub> (W/L) I<sub>D</sub>)** is the **transconductance**.\n\n### **Closed-Loop Gain (A<sub>CL</sub>)**\nUsing **negative feedback theory** (shunt-shunt feedback):\n$$\nA_{CL} = \\frac{A_{OL}}{1 + A_{OL} \\beta}\n$$\nIf **|A<sub>OL</sub> β| ≫ 1** (strong feedback), the gain simplifies to:\n$$\nA_{CL} \\approx \\frac{1}{\\beta} = \\frac{R_1 + R_2}{R_2} = 1 + \\frac{R_1}{R_2}\n$$\nThis is a **non-inverting amplifier** with **gain set by resistor ratios**.\n\n### **Input/Output Impedance**\n- **Input Impedance (Z<sub>in</sub>)**: High (due to MOSFET gate isolation).\n- **Output Impedance (Z<sub>out</sub>)**: Reduced by feedback (≈ **R<sub>D</sub> / (1 + A<sub>OL</sub> β)**).\n\n---\n\n---\n\n## **🔹 Key Observations & Design Considerations**\n\n### **✅ Stability**\n- The feedback loop must be **stable**. For **R<sub>1</sub>, R<sub>2</sub> > 0**, the feedback is **negative**, ensuring stability.\n- **Phase margin** should be checked if high-frequency behavior is critical.\n\n### **✅ Operating Region**\n- **M₁ must remain in saturation** for linear amplification:\n  $$\n  V_{DS} = V_D - V_F = (V_{DD} - I_D R_D) - \\beta V_{out} > V_{GS} - V_{th}\n  $$\n  Ensure **V<sub>DD</sub>** is sufficiently large to avoid triode region.\n\n### **✅ Applications**\n- **Voltage regulator** (if **V<sub>in</sub>** is controlled by an error amplifier).\n- **Non-inverting buffer/amplifier** (if **V<sub>in</sub>** is the signal input).\n- **Biasing circuit** (if **V<sub>in</sub>** is fixed for DC biasing).\n\n---\n\n---\n\n## **🔹 Summary of Results**\n\n| **Parameter**       | **Expression**                          | **Notes**                          |\n|----------------------|-----------------------------------------|------------------------------------|\n| **Feedback Factor**  | β = R₂ / (R₁ + R₂)                      | Determines gain and stability.     |\n| **Closed-Loop Gain** | A<sub>CL</sub> ≈ 1 + R₁/R₂              | For strong feedback (A<sub>OL</sub>β ≫ 1). |\n| **DC Output**        | V<sub>out</sub> ≈ V<sub>in</sub> / β    | Approximate for large loop gain.   |\n| **Input Impedance**  | High (≈ Gate capacitance)               | MOSFET gate is insulated.          |\n| **Output Impedance** | Low (≈ R<sub>D</sub> / (1 + A<sub>OL</sub>β)) | Feedback reduces output impedance. |\n\n---\n\n### **🔹 Final Remarks**\n- This circuit is a **non-inverting feedback amplifier** with **gain ≈ 1 + R₁/R₂**.\n- **M₁ must be biased in saturation** for proper operation.\n- **Feedback stabilizes gain**, reduces distortion, and improves linearity.\n- **V<sub>DD</sub> must be sufficiently large** to keep M₁ in saturation.\n\n> **💡 Key Takeaway**: The voltage divider (**R₁, R₂**) sets the **feedback factor (β)**, and the **closed-loop gain is approximately (R₁ + R₂)/R₂**, independent of MOSFET parameters (for strong feedback). This makes the circuit **stable and predictable** for analog signal processing.",
        "format": "markdown",
        "sha256": "e2746cc5eee6c4235ab158a9cfb8a93081a8aaae88997b9e2a50a7c76cb9f318"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reverses the essential topology: Vin is applied to the source, while the output divider feeds the gate; it instead puts Vin at the gate and feedback at the source. Although it states the correct feedback ratio and closed-loop gain, its common-source model and gain derivation do not support them.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1810,
        "output_tokens": 8821,
        "total_tokens": 10631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1810,
        "output_tokens": 8821,
        "total_tokens": 10631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6932,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **MOSFET-based Schmitt trigger** with **positive feedback**, designed to introduce **hysteresis** in its input-output transfer characteristic. Below is a structured analysis of its behavior, operating principles, and key properties.\n\n---\n\n---\n\n### **1. Circuit Type & Feedback Mechanism**\n- **Topology**: Common-source MOSFET amplifier with **feedback from the drain (output) to the source** via a resistive voltage divider ($R_1$, $R_2$).\n- **Feedback Type**: \n  - **Voltage feedback** (samples output voltage $V_{\\text{out}}$).\n  - **Series feedback** (mixed with input at the source node).\n  - **Positive feedback**: As $V_{\\text{out}}$ increases, the source voltage $V_F$ rises, reducing $V_{GS} = V_{\\text{in}} - V_F$. This reduces the drain current $I_D$, which further increases $V_{\\text{out}}$ (since $V_{\\text{out}} = V_{DD} - I_D R_D$). This **amplifies deviations**, leading to **bistable behavior** (hysteresis).\n\n---\n\n---\n\n### **2. DC Analysis (Operating Point)**\n#### **Key Equations**\n1. **Drain Current in Saturation**:\n   $$\n   I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2, \\quad \\text{where } V_{GS} = V_{\\text{in}} - V_F\n   $$\n2. **Output Voltage**:\n   $$\n   V_{\\text{out}} = V_{DD} - I_D R_D\n   $$\n3. **Source Voltage (Feedback Node)**:\n   Assuming negligible current through $R_1$ and $R_2$ (valid if $R_1, R_2 \\gg 1/g_m$):\n   $$\n   V_F = V_{\\text{out}} \\cdot \\frac{R_2}{R_1 + R_2}\n   $$\n4. **Substitute $V_F$ into $V_{GS}$**:\n   $$\n   V_{GS} = V_{\\text{in}} - V_{\\text{out}} \\cdot \\frac{R_2}{R_1 + R_2}\n   $$\n\n#### **Stable States**\n- The circuit has **two stable states** due to positive feedback:\n  - **High State**: $V_{\\text{out}} \\approx V_{DD}$ (MOSFET off, $I_D = 0$).\n  - **Low State**: $V_{\\text{out}} \\approx 0$ (MOSFET on, $I_D > 0$).\n- The transition between states depends on $V_{\\text{in}}$, with **hysteresis** (two thresholds: one for rising $V_{\\text{in}}$, one for falling).\n\n---\n\n---\n\n### **3. Hysteresis & Thresholds**\n#### **Upper Threshold ($V_{\\text{in, high}}$)**\n- When $V_{\\text{out}} \\approx V_{DD}$, $V_F = V_{DD} \\cdot \\frac{R_2}{R_1 + R_2}$.\n- MOSFET turns **on** when $V_{GS} = V_{\\text{in}} - V_F \\geq V_{TH}$:\n  $$\n  V_{\\text{in, high}} = V_{TH} + V_{DD} \\cdot \\frac{R_2}{R_1 + R_2}\n  $$\n\n#### **Lower Threshold ($V_{\\text{in, low}}$)**\n- When $V_{\\text{out}} \\approx 0$, $V_F \\approx 0$.\n- MOSFET turns **off** when $V_{GS} = V_{\\text{in}} \\leq V_{TH}$:\n  $$\n  V_{\\text{in, low}} = V_{TH}\n  $$\n\n#### **Hysteresis Width**\n$$\n\\Delta V = V_{\\text{in, high}} - V_{\\text{in, low}} = V_{DD} \\cdot \\frac{R_2}{R_1 + R_2}\n$$\n\n> **Example**: If $V_{DD} = 5\\,\\text{V}$, $R_1 = R_2 = 10\\,\\text{k}\\Omega$, then $\\Delta V = 2.5\\,\\text{V}$. The circuit switches at $V_{\\text{in}} = 1\\,\\text{V}$ (low) and $3.5\\,\\text{V}$ (high).\n\n---\n\n---\n\n### **4. Small-Signal Behavior (Not Applicable for Schmitt Trigger)**\n- **Negative feedback circuits** (e.g., amplifiers) use small-signal analysis to derive gain, input/output resistances, etc.\n- **This circuit uses positive feedback**, so **small-signal analysis is invalid** for linear operation. Instead, it exhibits **nonlinear behavior** with **two stable states** and **hysteresis**.\n\n---\n\n---\n\n### **5. Applications**\n- **Signal Conditioning**: Converts noisy or slow-rising signals into clean digital transitions.\n- **Noise Immunity**: Hysteresis prevents false triggering due to noise.\n- **Oscillators**: Can be part of relaxation oscillators (e.g., with RC networks).\n- **Comparator**: Used as a comparator with built-in hysteresis.\n\n---\n\n---\n\n### **6. Key Observations**\n| Parameter | Value | Explanation |\n|-----------|-------|-------------|\n| **Feedback Type** | Positive | Leads to bistability and hysteresis. |\n| **Stable States** | 2 | High ($V_{DD}$) and Low ($0\\,\\text{V}$). |\n| **Hysteresis Width** | $V_{DD} \\cdot \\frac{R_2}{R_1 + R_2}$ | Determined by the feedback divider. |\n| **Thresholds** | $V_{TH}$ (low), $V_{TH} + V_{DD} \\cdot \\frac{R_2}{R_1 + R_2}$ (high) | Depends on $V_{TH}$ and divider ratio. |\n| **MOSFET Region** | Saturation (active state) / Cutoff (inactive state) | Switches between regions during transitions. |\n\n---\n\n---\n\n### **7. Summary**\nThis circuit is a **MOSFET-based Schmitt trigger** with **positive feedback** from the drain to the source via $R_1$ and $R_2$. It provides **hysteresis** in the $V_{\\text{in}}$-$V_{\\text{out}}$ transfer curve, making it ideal for **noise-immune digital signal processing**. The hysteresis width and switching thresholds are determined by the feedback resistor ratio and the MOSFET threshold voltage.\n\n> **Final Answer**:  \n> The circuit is a **MOSFET Schmitt trigger** with **positive feedback**, exhibiting **hysteresis** in its input-output characteristic. It has two stable states (high/low $V_{\\text{out}}$) and switches between them at input thresholds $V_{\\text{in, low}} = V_{TH}$ and $V_{\\text{in, high}} = V_{TH} + V_{DD} \\cdot \\frac{R_2}{R_1 + R_2}$, with a hysteresis width of $\\Delta V = V_{DD} \\cdot \\frac{R_2}{R_1 + R_2}$. This configuration is used for **noise immunity** and **signal conditioning** in digital systems.",
        "format": "markdown",
        "sha256": "2978258324db95812868d3a8ea2a09d977c138f739cf200674af0561f331952f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology: the input is applied at the source and the output divider feeds the gate, producing negative feedback. It instead puts feedback at the source and concludes the circuit is a positive-feedback Schmitt trigger with hysteresis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1810,
        "output_tokens": 11417,
        "total_tokens": 13227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1810,
        "output_tokens": 11417,
        "total_tokens": 13227,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-source MOSFET amplifier with voltage-series feedback** (also known as *shunt-shunt feedback* in some contexts, though it's more accurately *series-shunt* for this configuration). Below is a detailed analysis of its behavior, focusing on **small-signal AC characteristics** (assuming the MOSFET is in saturation and the circuit is biased properly for linear operation).\n\n---\n\n---\n\n### **🔹 Circuit Configuration**\n- **MOSFET (M₁)**: Common-source configuration (source grounded).\n- **Resistor R_D**: Load resistor connected to the drain.\n- **Feedback Network**: Voltage divider formed by $ R_1 $ and $ R_2 $, feeding back a portion of $ V_{\\text{out}} $ to the gate.\n- **Input**: $ V_{\\text{in}} $ applied directly to the gate.\n- **Output**: $ V_{\\text{out}} $ taken from the drain node.\n\nThe feedback network creates a **negative feedback loop**, which stabilizes the gain, increases input impedance, and reduces output impedance.\n\n---\n\n---\n\n### **🔹 Small-Signal Analysis**\n\n#### **1. Open-Loop Gain ($ A $)**\n- The open-loop gain (without feedback) of a common-source amplifier with a resistive load $ R_D $ is:\n  $$\n  A = \\frac{v_{\\text{out}}}{v_{gs}} = -g_m R_D\n  $$\n  where:\n  - $ g_m $: Transconductance of the MOSFET.\n  - $ v_{gs} $: Gate-to-source voltage (small-signal).\n\nThis is **inverting** due to the nature of the common-source configuration.\n\n---\n\n#### **2. Feedback Factor ($ \\beta $)**\n- The feedback network $ R_1 $ and $ R_2 $ forms a voltage divider:\n  $$\n  \\beta = \\frac{R_2}{R_1 + R_2}\n  $$\n  This represents the fraction of $ V_{\\text{out}} $ fed back to the gate.\n\n---\n\n#### **3. Closed-Loop Voltage Gain ($ A_f $)**\nUsing the standard feedback formula for **series-shunt feedback** (voltage-voltage feedback), the closed-loop gain is:\n$$\nA_f = \\frac{A}{1 + A \\beta}\n$$\nSubstituting $ A = -g_m R_D $ and $ \\beta = \\frac{R_2}{R_1 + R_2} $:\n$$\nA_f = \\frac{-g_m R_D}{1 - g_m R_D \\cdot \\frac{R_2}{R_1 + R_2}}\n$$\n\n- **For large loop gain** ($ g_m R_D \\gg 1 $), the closed-loop gain simplifies to:\n  $$\n  A_f \\approx \\frac{1}{\\beta} = \\frac{R_1 + R_2}{R_2}\n  $$\n  This matches the **non-inverting op-amp gain** configuration, despite the open-loop being inverting. The feedback flips the phase, resulting in a **positive gain** for the closed-loop system.\n\n- **Key Insight**: The feedback makes the amplifier behave like a **non-inverting voltage amplifier**, with gain determined by the resistor ratio $ \\frac{R_1 + R_2}{R_2} $, independent of device parameters (e.g., $ g_m $) when the loop gain is high.\n\n---\n\n#### **4. Input Resistance ($ R_{\\text{in}} $)**\n- The gate of a MOSFET has **infinite input resistance** in small-signal analysis.\n- The feedback network does not introduce a low-resistance path to ground at the input node.\n- **Conclusion**:  \n  $$\n  R_{\\text{in}} \\to \\infty\n  $$\n  The input resistance remains very high, making this amplifier suitable for high-impedance sources.\n\n---\n\n#### **5. Output Resistance ($ R_{\\text{out}} $)**\n- The open-loop output resistance is approximately $ R_D $ (assuming the MOSFET’s intrinsic output resistance $ r_o $ is very large).\n- With feedback, the output resistance is reduced by the loop gain factor:\n  $$\n  R_{\\text{out}} = \\frac{R_D}{1 + |A \\beta|} = \\frac{R_D}{1 + g_m R_D \\cdot \\frac{R_2}{R_1 + R_2}}\n  $$\n- **For large loop gain**, $ R_{\\text{out}} \\approx \\frac{R_D}{g_m R_D \\beta} = \\frac{1}{g_m \\beta} $, which is **very small**, improving the amplifier's ability to drive low-impedance loads.\n\n---\n\n---\n\n### **🔹 DC Operating Point (Brief Note)**\n- The DC operating point depends on the MOSFET’s threshold voltage $ V_{th} $ and the biasing conditions.\n- For a proper DC bias, the gate voltage must be set such that $ V_{GS} > V_{th} $, placing the MOSFET in saturation.\n- However, since the problem does not provide specific values for $ V_{DD} $, $ R_D $, or $ V_{th} $, we focus on **AC analysis**.\n\n---\n\n---\n\n### **🔹 Summary of Key Results**\n\n| **Parameter**         | **Expression**                                                                 |\n|------------------------|---------------------------------------------------------------------------------|\n| Open-loop gain         | $ A = -g_m R_D $                                                               |\n| Feedback factor        | $ \\beta = \\frac{R_2}{R_1 + R_2} $                                             |\n| Closed-loop gain       | $ A_f = \\frac{-g_m R_D}{1 - g_m R_D \\cdot \\frac{R_2}{R_1 + R_2}} $           |\n| Approx. gain (large $ A $) | $ A_f \\approx \\frac{R_1 + R_2}{R_2} $                                       |\n| Input resistance       | $ R_{\\text{in}} \\to \\infty $                                                |\n| Output resistance      | $ R_{\\text{out}} = \\frac{R_D}{1 + g_m R_D \\cdot \\frac{R_2}{R_1 + R_2}} $   |\n\n---\n\n---\n\n### **🔹 Interpretation & Practical Implications**\n- **Gain Stability**: The closed-loop gain is **independent of $ g_m $** (and thus device variations) when the loop gain is large, making the amplifier more robust.\n- **High Input Impedance**: Ideal for interfacing with high-impedance signal sources (e.g., sensors).\n- **Low Output Impedance**: Improves load-driving capability.\n- **Phase Behavior**: Despite the open-loop being inverting, the feedback configuration results in a **non-inverting** closed-loop gain.\n\n---\n\n---\n\n### **🔹 Final Answer**\nThis circuit is a **common-source MOSFET amplifier with negative voltage-series feedback**. Its **closed-loop voltage gain** is approximately $ \\frac{R_1 + R_2}{R_2} $ for large loop gain, it has **very high input resistance**, and **reduced output resistance**. The feedback stabilizes the gain, improves linearity, and enhances the amplifier's performance as a **non-inverting voltage amplifier**. \n\n**Key Formulae**:\n- Closed-loop gain: $ \\boxed{A_f = \\frac{R_1 + R_2}{R_2}} $ (for large loop gain)\n- Input resistance: $ \\boxed{R_{\\text{in}} \\to \\infty} $\n- Output resistance: $ \\boxed{R_{\\text{out}} = \\frac{R_D}{1 + g_m R_D \\cdot \\frac{R_2}{R_1 + R_2}}} $",
        "format": "markdown",
        "sha256": "82335b5003969829515a573726a8d2593ea7e59e64dd0ad1cfe93de2c4d5ad29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the output-divider feedback to the gate and negative feedback, but incorrectly treats M1's source as grounded and Vin as a gate input. Its closed-loop gain derivation is also inconsistent; the golden solution assigns 3 for this grounded-source error despite recognizing the feedback.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1810,
        "output_tokens": 8735,
        "total_tokens": 10545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1810,
        "output_tokens": 8735,
        "total_tokens": 10545,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-source amplifier with an active load**, formed by two MOSFETs:  \n- **M₁ (PMOS)**: Input transistor with gate driven by $ V_{\\text{in}} $, source tied to $ V_{DD} $, and drain connected to $ V_{\\text{out}} $.  \n- **M₂ (NMOS)**: Active load transistor with gate biased at $ V_b $, source grounded, and drain connected to $ V_{\\text{out}} $.  \n\n---\n\n---\n\n## **🔍 Circuit Analysis**\n\n### **1. Circuit Configuration**\n- **Type**: Single-ended **common-source amplifier** with an **active load** (M₂ acts as a current source for M₁).  \n- **Purpose**: High-gain voltage amplification, commonly used in analog ICs (e.g., op-amp input stages).  \n- **Key Feature**: Replaces passive resistors with a transistor (M₂) to improve gain and reduce area in integrated circuits.\n\n---\n\n### **2. Operating Regions**\nFor **DC biasing**, both transistors must operate in **saturation** for stable operation:\n\n#### **M₁ (PMOS)**\n- **Source-Gate Voltage**: $ V_{SG} = V_{DD} - V_{\\text{in}} $  \n- **Saturation Condition**:  \n  $$\n  V_{SD} \\geq V_{SG} - |V_{thp}| \\quad \\Rightarrow \\quad V_{DD} - V_{\\text{out}} \\geq (V_{DD} - V_{\\text{in}}) - |V_{thp}|\n  $$  \n  Simplifies to:  \n  $$\n  V_{\\text{out}} \\leq V_{\\text{in}} + |V_{thp}|\n  $$\n\n#### **M₂ (NMOS)**\n- **Gate-Source Voltage**: $ V_{GS} = V_b $  \n- **Saturation Condition**:  \n  $$\n  V_{DS} \\geq V_{GS} - V_{thn} \\quad \\Rightarrow \\quad V_{\\text{out}} \\geq V_b - V_{thn}\n  $$\n\n#### **DC Bias Constraints**\nFor both transistors to remain in saturation:  \n$$\n\\boxed{V_b - V_{thn} \\leq V_{\\text{out}} \\leq V_{\\text{in}} + |V_{thp}|}\n$$\n\n---\n\n### **3. DC Current Matching**\nIn saturation, the **drain currents** of M₁ and M₂ must be equal (series connection):  \n$$\nI_{D1} = I_{D2}\n$$\n\nFor **M₁ (PMOS)**:  \n$$\nI_{D1} = \\frac{1}{2} k_p (V_{SG} - |V_{thp}|)^2 = \\frac{1}{2} k_p (V_{DD} - V_{\\text{in}} - |V_{thp}|)^2\n$$\n\nFor **M₂ (NMOS)**:  \n$$\nI_{D2} = \\frac{1}{2} k_n (V_{GS} - V_{thn})^2 = \\frac{1}{2} k_n (V_b - V_{thn})^2\n$$\n\nEquating currents:  \n$$\n\\boxed{k_p (V_{DD} - V_{\\text{in}} - |V_{thp}|)^2 = k_n (V_b - V_{thn})^2}\n$$  \nThis equation **relates the input voltage $ V_{\\text{in}} $, bias voltage $ V_b $, and device parameters** to ensure proper DC biasing.\n\n---\n\n### **4. Small-Signal Analysis (AC Behavior)**\n#### **Small-Signal Model**\n- **M₁ (PMOS)**:  \n  - Transconductance: $ g_{m1} = \\sqrt{2 k_p I_D} $  \n  - Output resistance: $ r_{o1} = \\frac{1}{\\lambda_p I_D} $  \n- **M₂ (NMOS)**:  \n  - Acts as a **current source** with output resistance $ r_{o2} = \\frac{1}{\\lambda_n I_D} $\n\n#### **Voltage Gain**\nThe output node sees the **parallel combination** of $ r_{o1} $ and $ r_{o2} $. The voltage gain is:  \n$$\nA_v = -g_{m1} \\cdot (r_{o1} \\parallel r_{o2})\n$$  \nIf $ r_{o2} \\gg r_{o1} $ (typical for active loads), the gain simplifies to:  \n$$\n\\boxed{A_v \\approx -g_{m1} \\cdot r_{o2} = -\\frac{2}{\\lambda_n (V_{DD} - V_{\\text{in}} - |V_{thp}|)}}\n$$  \nThis shows **high gain** due to the large $ r_{o2} $ of the active load.\n\n---\n\n### **5. Key Characteristics**\n| **Parameter**       | **Value**                                                                 |\n|----------------------|---------------------------------------------------------------------------|\n| **Input Type**       | Voltage ($ V_{\\text{in}} $)                                             |\n| **Output Type**      | Voltage ($ V_{\\text{out}} $)                                            |\n| **Gain**             | High (typically $ |A_v| > 10 $) due to active load                          |\n| **Output Swing**     | Limited by $ V_b - V_{thn} \\leq V_{\\text{out}} \\leq V_{\\text{in}} + |V_{thp}| $ |\n| **Biasing**          | $ V_b $ must be set to keep M₂ in saturation (e.g., $ V_b > V_{thn} $) |\n| **Frequency Response** | Bandwidth limited by parasitic capacitances and $ r_o $                |\n\n---\n\n### **6. Practical Considerations**\n- **Biasing $ V_b $**:  \n  - Typically set to $ V_b = V_{thn} + V_{OV} $, where $ V_{OV} $ is the overdrive voltage (e.g., 0.2–0.5 V) to ensure M₂ stays in saturation.  \n  - Example: If $ V_{thn} = 0.7 \\, \\text{V} $, $ V_b = 1.0 \\, \\text{V} $ ensures $ V_{OV} = 0.3 \\, \\text{V} $.\n\n- **Output Swing**:  \n  - To maximize swing, $ V_b $ should be chosen such that $ V_b - V_{thn} $ is small (e.g., 0.2 V), and $ V_{\\text{in}} $ should be biased near $ V_{DD} - |V_{thp}| $.\n\n- **Stability**:  \n  - The circuit is **not inherently stable** for large signals; it requires proper biasing to avoid saturation or cutoff.\n\n---\n\n### **7. Example Calculation**\n**Given**:  \n- $ V_{DD} = 5 \\, \\text{V} $, $ V_{thn} = 0.7 \\, \\text{V} $, $ |V_{thp}| = 0.7 \\, \\text{V} $  \n- $ k_n = k_p = 100 \\, \\mu\\text{A/V}^2 $, $ V_b = 1.0 \\, \\text{V} $  \n\n**Step 1: Compute $ I_D $ from M₂**  \n$$\nI_D = \\frac{1}{2} k_n (V_b - V_{thn})^2 = \\frac{1}{2} \\cdot 100 \\cdot (0.3)^2 = 4.5 \\, \\mu\\text{A}\n$$\n\n**Step 2: Find $ V_{\\text{in}} $ for M₁ to match $ I_D $**  \n$$\n4.5 = \\frac{1}{2} \\cdot 100 \\cdot (5 - V_{\\text{in}} - 0.7)^2 \\Rightarrow (4.3 - V_{\\text{in}})^2 = 0.09 \\Rightarrow V_{\\text{in}} = 4.0 \\, \\text{V}\n$$\n\n**Step 3: Output Voltage Range**  \n$$\nV_{\\text{out}} \\in [V_b - V_{thn}, V_{\\text{in}} + |V_{thp}|] = [0.3 \\, \\text{V}, 4.7 \\, \\text{V}]\n$$\n\n**Step 4: Small-Signal Gain**  \nAssume $ \\lambda_n = 0.1 \\, \\text{V}^{-1} $, $ V_{OV1} = 0.3 \\, \\text{V} $:  \n$$\nA_v \\approx -\\frac{2}{\\lambda_n V_{OV1}} = -\\frac{2}{0.1 \\cdot 0.3} \\approx -66.7\n$$\n\n---\n\n## **📌 Summary**\n- **Circuit Type**: Common-source amplifier with **active load (M₂)**.  \n- **Key Advantage**: High gain due to the **high output resistance** of the active load.  \n- **Biasing Requirement**: $ V_b $ must be set to keep M₂ in saturation.  \n- **Output Swing**: Limited by the saturation constraints of both transistors.  \n- **Gain**: Approximately $ -g_{m1} \\cdot r_{o2} $, which is **large** (e.g., $ |A_v| \\sim 10–100 $).  \n\nThis configuration is **widely used in analog ICs** (e.g., operational amplifiers) for its **high gain, low power consumption, and compact layout**.",
        "format": "markdown",
        "sha256": "e5d780e6b228304b582e543a13c340cffd5caf6df847eca40f008e22a1f03414"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source follower as a PMOS common-source stage and gives an inverting, high-gain result. The golden solution explicitly assigns 0 to this topology error.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1326,
        "output_tokens": 8585,
        "total_tokens": 9911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1326,
        "output_tokens": 8585,
        "total_tokens": 9911,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6463,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: PMOS-NMOS Common-Source Amplifier with Active Load**\n\nThe given circuit consists of:\n- **M₁ (PMOS)**: Source connected to $ V_{DD} $, gate driven by $ V_{in} $, drain at $ V_{out} $.\n- **M₂ (NMOS)**: Source grounded, gate biased at $ V_b $, drain at $ V_{out} $.\n\nThis configuration is a **PMOS common-source amplifier with an NMOS current source load**. Below is a structured analysis:\n\n---\n\n---\n\n## **1. Circuit Type & Operation**\n- **Function**: Acts as a **voltage amplifier** or **level shifter**, depending on $ V_b $.\n- **Key Behavior**:\n  - When $ V_{in} $ is **low**, M₁ (PMOS) turns **ON**, pulling $ V_{out} $ toward $ V_{DD} $.\n  - When $ V_{in} $ is **high**, M₁ turns **OFF**, and M₂ (NMOS) pulls $ V_{out} $ toward **0 V** (ground).\n  - $ V_b $ sets the **DC bias** for M₂, ensuring it operates as a **current source** in saturation.\n\n---\n\n---\n\n## **2. DC Operating Point Analysis**\n### **Assumptions**\n- Both transistors are in **saturation** (valid for linear amplification).\n- $ V_{thn} $: NMOS threshold voltage (positive).\n- $ V_{thp} $: PMOS threshold voltage (negative, so $ |V_{thp}| = -V_{thp} $).\n\n### **Saturation Conditions**\n| Transistor | Saturation Condition | Current Equation |\n|------------|----------------------|------------------|\n| **M₂ (NMOS)** | $ V_{out} \\geq V_b - V_{thn} $ | $ I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{thn})^2 $ |\n| **M₁ (PMOS)** | $ V_{out} \\leq V_{in} + |V_{thp}| $ | $ I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{DD} - V_{in} - |V_{thp}|)^2 $ |\n\n### **DC Current Equality**\nSince $ I_{D1} = I_{D2} $ (series connection):\n$$\n\\mu_p \\left(\\frac{W}{L}\\right)_1 (V_{DD} - V_{in} - |V_{thp}|)^2 = \\mu_n \\left(\\frac{W}{L}\\right)_2 (V_b - V_{thn})^2\n$$\n- **Purpose**: $ V_b $ is chosen to set the **quiescent current** $ I_D $, ensuring both transistors remain in saturation.\n- **Example**: If $ V_b = V_{thn} + V_{ov} $ (where $ V_{ov} $ is the overdrive voltage), then $ I_D $ is fixed by $ V_{ov} $.\n\n### **Output Voltage ($ V_{out} $)**\n- Determined by the **current through M₂**:\n  $$\n  V_{out} = V_{DS2} = \\text{Value satisfying } I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{thn})^2\n  $$\n- **Range**: Must satisfy both saturation conditions:\n  $$\n  V_b - V_{thn} \\leq V_{out} \\leq V_{in} + |V_{thp}|\n  $$\n\n---\n\n---\n\n## **3. Small-Signal Analysis**\n### **Small-Signal Model**\n- **M₁ (PMOS)**:\n  - Transconductance: $ g_{m1} = \\sqrt{2 \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 I_D} $\n  - Output resistance: $ r_{o1} = \\frac{1}{\\lambda_p I_D} $ (channel-length modulation parameter $ \\lambda_p $)\n- **M₂ (NMOS)**:\n  - Gate is at **AC ground** (since $ V_b $ is DC), so it acts as a **current source** with output resistance $ r_{o2} = \\frac{1}{\\lambda_n I_D} $.\n\n### **Voltage Gain ($ A_v $)**\nThe small-signal gain is derived from the **transconductance of M₁** and the **parallel output resistance** of M₁ and M₂:\n$$\nA_v = \\frac{v_{out}}{v_{in}} = -g_{m1} (r_{o1} \\parallel r_{o2})\n$$\n- **Sign Convention**: Negative for **inverting gain** (typical for common-source amplifiers).\n- **Magnitude**: High gain due to large $ r_{o1}, r_{o2} $ (e.g., $ A_v \\approx -g_{m1} \\cdot \\text{few kΩ} $).\n\n### **Input/Output Resistance**\n- **Input Resistance ($ R_{in} $)**: Infinite (gate of M₁ is insulated).\n- **Output Resistance ($ R_{out} $)**: $ r_{o1} \\parallel r_{o2} \\approx \\text{few kΩ} $ (depends on $ I_D $ and $ \\lambda $).\n\n---\n\n---\n\n## **4. Key Observations**\n### **Operating Regions**\n| $ V_{in} $ | M₁ State | M₂ State | $ V_{out} $ |\n|-------------|----------|----------|--------------|\n| **Very Low** ($ V_{in} \\ll V_{DD} - |V_{thp}| $) | **Saturation** | **Saturation** | $ V_{out} \\approx V_{DD} - \\frac{I_D}{k_p} $ |\n| **Very High** ($ V_{in} \\approx V_{DD} $) | **Cutoff** | **Saturation** | $ V_{out} \\approx 0 $ (pulled to ground by M₂) |\n| **Mid-Range** | **Saturation** | **Saturation** | Linear amplification region |\n\n### **Design Considerations**\n- **Biasing $ V_b $**: Must ensure M₂ remains in saturation for the desired $ V_{out} $ range.\n- **Gain Maximization**: Achieved by:\n  - Maximizing $ g_{m1} $ (higher $ I_D $, larger $ W/L $).\n  - Minimizing $ \\lambda $ (longer channel lengths).\n- **Linearity**: Limited by the saturation conditions of both transistors.\n\n---\n\n---\n\n## **5. Practical Applications**\n1. **Common-Source Amplifier**:\n   - Used for **high-gain signal amplification** in analog circuits.\n   - $ V_b $ sets the **quiescent point** for linear operation.\n2. **Voltage Comparator**:\n   - If $ V_b $ is fixed, $ V_{out} $ transitions sharply when $ V_{in} $ crosses a threshold.\n3. **Level Shifter**:\n   - Converts logic levels (e.g., from 0–1.8V to 0–3.3V).\n\n---\n\n---\n\n## **6. Summary of Key Equations**\n| Parameter | Equation |\n|-----------|----------|\n| **DC Current** | $ I_D = \\frac{1}{2} \\mu C_{ox} \\left(\\frac{W}{L}\\right) V_{ov}^2 $ |\n| **Saturation Condition (M₂)** | $ V_{out} \\geq V_b - V_{thn} $ |\n| **Saturation Condition (M₁)** | $ V_{out} \\leq V_{in} + |V_{thp}| $ |\n| **Voltage Gain** | $ A_v = -g_{m1} (r_{o1} \\parallel r_{o2}) $ |\n| **Transconductance (M₁)** | $ g_{m1} = \\sqrt{2 \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 I_D} $ |\n| **Output Resistance** | $ R_{out} = r_{o1} \\parallel r_{o2} = \\frac{1}{(\\lambda_p + \\lambda_n) I_D} $ |\n\n---\n\n---\n\n### **Final Answer**\nThis circuit is a **PMOS common-source amplifier with an NMOS current source load**. \n- **DC Behavior**: $ V_{out} $ is determined by the balance of currents through M₁ and M₂, with $ V_b $ setting the bias for M₂.\n- **Small-Signal Gain**: $ A_v = -g_{m1} (r_{o1} \\parallel r_{o2}) $, providing **high voltage gain** (typically **10–100×**).\n- **Applications**: Suitable for **amplification, level shifting, or comparison**, depending on $ V_b $ and $ V_{in} $ ranges.\n- **Critical Design Note**: Ensure both transistors remain in **saturation** for linear operation by choosing $ V_b $ and $ V_{in} $ appropriately. \n\n> **Key Insight**: The circuit leverages the **active load (M₂)** to achieve high gain without a passive resistor, making it area-efficient in IC design.",
        "format": "markdown",
        "sha256": "0b39d37dba64155cd41fcea751dfd448fade63050a4f6fd41bfb66b256edb56a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a PMOS common-source amplifier. It is an NMOS source follower with output at M1’s source, so the gain is positive and near unity, not an inverting high gain.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1326,
        "output_tokens": 8151,
        "total_tokens": 9477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1326,
        "output_tokens": 8151,
        "total_tokens": 9477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6080,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: PMOS Common-Source Amplifier with NMOS Active Load**\n\n---\n\n#### **🔹 Circuit Identification**\nThe given circuit is a **PMOS common-source amplifier with an NMOS active load**:\n- **M₁ (PMOS)**: Input transistor (gate connected to $ V_{\\text{in}} $, source to $ V_{DD} $, drain to $ V_{\\text{out}} $).\n- **M₂ (NMOS)**: Active load (gate biased at $ V_b $, source to ground, drain to $ V_{\\text{out}} $).\n- **Configuration**: Single-ended, with $ V_{\\text{out}} $ taken at the shared drain node of M₁ and M₂.\n\nThis is **not** a standard CMOS inverter (where both gates are tied to $ V_{\\text{in}} $). Instead, it functions as a **voltage amplifier** with a bias voltage $ V_b $ controlling the operating point of M₂.\n\n---\n\n---\n\n## **📌 1. DC Operating Point Analysis**\n### **Assumptions**\n- Both transistors are in **saturation** for proper amplification.\n- $ V_b $ is a **DC bias voltage** (no AC signal) to set the operating point of M₂.\n- $ V_{\\text{in}} $ includes a DC bias $ V_{IN} $ and an AC signal $ v_{\\text{in}} $.\n\n---\n\n### **🔹 DC Conditions for Saturation**\n#### **For M₂ (NMOS):**\n- **Gate-Source Voltage**: $ V_{GS2} = V_b - 0 = V_b $\n- **Saturation Condition**:  \n  $$\n  V_{DS2} \\geq V_{GS2} - V_{thn} \\implies V_{\\text{out}} \\geq V_b - V_{thn}\n  $$\n- **Drain Current (Saturation)**:  \n  $$\n  I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_b - V_{thn})^2\n  $$\n\n#### **For M₁ (PMOS):**\n- **Source-Gate Voltage**: $ V_{SG1} = V_{DD} - V_{\\text{in}} $\n- **Saturation Condition**:  \n  $$\n  V_{SD1} \\geq V_{SG1} - |V_{thp}| \\implies V_{DD} - V_{\\text{out}} \\geq (V_{DD} - V_{\\text{in}}) - |V_{thp}|\n  $$\n  Simplifies to:  \n  $$\n  V_{\\text{out}} \\leq V_{\\text{in}} + |V_{thp}|\n  $$\n- **Drain Current (Saturation)**:  \n  $$\n  I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{SG1} - |V_{thp}|)^2 = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{DD} - V_{\\text{in}} - |V_{thp}|)^2\n  $$\n\n#### **DC Current Matching**\nSince M₁ and M₂ share the same drain node:\n$$\nI_{D1} = I_{D2} \\implies \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{DD} - V_{\\text{in}} - |V_{thp}|)^2 = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_b - V_{thn})^2\n$$\nThis equation **sets the DC operating point** of $ V_{\\text{in}} $ and $ V_{\\text{out}} $ based on $ V_b $.\n\n---\n\n---\n\n## **📌 2. Small-Signal Analysis**\n### **🔹 Small-Signal Model**\n- **M₁ (PMOS)**:  \n  - Transconductance: $ g_{m1} = \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{SG1} - |V_{thp}|) = \\frac{2 I_{D1}}{V_{SG1} - |V_{thp}|} $  \n  - Output Resistance: $ r_{o1} = \\frac{1}{\\lambda I_{D1}} $ (where $ \\lambda $ is channel-length modulation parameter).  \n  - Small-signal current source: $ g_{m1} \\cdot v_{sg1} $, where $ v_{sg1} = -v_{\\text{in}} $ (since $ V_{SG1} = V_{DD} - V_{\\text{in}} $).\n\n- **M₂ (NMOS)**:  \n  - Gate is at **AC ground** (DC bias $ V_b $), so $ v_{gs2} = 0 $.  \n  - Acts as a **resistor** $ r_{o2} = \\frac{1}{\\lambda I_{D2}} $ (since no small-signal gate voltage).\n\n- **Output Node**:  \n  The small-signal currents from M₁ and M₂ must satisfy KCL at $ V_{\\text{out}} $.\n\n---\n\n### **🔹 Voltage Gain Calculation**\nUsing the small-signal model:\n- The current from M₁’s transconductance: $ i_{d1} = -g_{m1} v_{\\text{in}} $ (flows into the output node).\n- The total resistance at the output: $ r_{\\text{out}} = r_{o1} \\parallel r_{o2} $.\n- By KCL:  \n  $$\n  -g_{m1} v_{\\text{in}} = \\frac{v_{\\text{out}}}{r_{o1} \\parallel r_{o2}}\n  $$\n  Solving for $ v_{\\text{out}} $:  \n  $$\n  v_{\\text{out}} = -g_{m1} (r_{o1} \\parallel r_{o2}) v_{\\text{in}}\n  $$\n\n#### **Voltage Gain**\n$$\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m1} (r_{o1} \\parallel r_{o2})\n$$\n- **Magnitude**: $ |A_v| = g_{m1} \\left( \\frac{r_{o1} r_{o2}}{r_{o1} + r_{o2}} \\right) $\n- **Sign**: Negative (inverting amplifier).\n\n---\n\n### **🔹 Key Observations**\n1. **High Input Impedance**: The gate of M₁ is a MOSFET gate → $ R_{\\text{in}} \\approx \\infty $.\n2. **Output Impedance**: $ R_{\\text{out}} = r_{o1} \\parallel r_{o2} $ (typically high, e.g., $ 10^2 $–$ 10^4 \\, \\Omega $).\n3. **Gain Dependence**:\n   - Increases with $ g_{m1} $ (larger $ (W/L)_1 $, higher $ I_{D1} $).\n   - Increases with $ r_{o1}, r_{o2} $ (longer channel lengths reduce $ \\lambda $, increasing $ r_o $).\n4. **Bias Sensitivity**: $ V_b $ must be chosen such that M₂ remains in saturation and $ I_{D1} = I_{D2} $.\n\n---\n\n---\n\n## **📌 3. Practical Considerations**\n### **🔹 Operating Region Constraints**\n- **M₂ Saturation**: $ V_b > V_{thn} $ and $ V_{\\text{out}} \\geq V_b - V_{thn} $.\n- **M₁ Saturation**: $ V_{DD} - V_{\\text{in}} > |V_{thp}| $ and $ V_{\\text{out}} \\leq V_{\\text{in}} + |V_{thp}| $.\n\n### **🔹 Design Trade-offs**\n| Parameter | Effect on Gain | Trade-off |\n|-----------|----------------|-----------|\n| $ (W/L)_1 $ | ↑ $ g_{m1} $ → ↑ Gain | Higher power consumption |\n| $ (W/L)_2 $ | ↓ $ r_{o2} $ → ↓ Gain | Lower $ V_b $ required for saturation |\n| $ \\lambda $ | ↓ $ r_{o1}, r_{o2} $ → ↓ Gain | Shorter channels (faster but lower gain) |\n| $ V_b $ | Controls $ I_{D2} $ | Must balance saturation and power |\n\n### **🔹 Frequency Response**\n- **Dominant Pole**: At the output node due to $ C_L $ (load capacitance) and $ r_{\\text{out}} $.\n- **Cutoff Frequency**:  \n  $$\n  f_{-3\\text{dB}} = \\frac{1}{2\\pi (r_{o1} \\parallel r_{o2}) C_L}\n  $$\n- **Bandwidth**: Limited by $ r_{\\text{out}} C_L $.\n\n---\n\n---\n\n## **📌 4. Summary of Circuit Behavior**\n| **Aspect**          | **Value/Expression**                          |\n|----------------------|-----------------------------------------------|\n| **Circuit Type**     | PMOS Common-Source Amplifier with NMOS Active Load |\n| **DC Current**       | $ I_{D1} = I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_b - V_{thn})^2 $ |\n| **Voltage Gain**     | $ A_v = -g_{m1} (r_{o1} \\parallel r_{o2}) $ |\n| **Input Resistance** | $ R_{\\text{in}} \\approx \\infty $ (MOSFET gate) |\n| **Output Resistance**| $ R_{\\text{out}} = r_{o1} \\parallel r_{o2} $ |\n| **Power Consumption**| $ P = V_{DD} \\cdot I_{D1} $ |\n\n---\n\n---\n\n## **🎯 Conclusion**\nThis circuit is a **single-stage PMOS common-source amplifier with an NMOS active load**. It provides **high input impedance, moderate-to-high voltage gain**, and is commonly used in analog ICs for signal amplification. The gain is **inverting** and depends on the transconductance of M₁ and the parallel output resistances of both transistors. Proper biasing ($ V_b $) is critical to ensure both transistors operate in saturation for linear amplification.\n\n**Key Takeaway**:  \n> *The circuit behaves as a voltage amplifier with gain $ A_v \\approx -g_{m1} (r_{o1} \\parallel r_{o2}) $, where $ g_{m1} $ is determined by the bias current and device dimensions of M₁.*",
        "format": "markdown",
        "sha256": "3b181f3fb6d2de5ee5c8e36fdab663b3e1cee665990b55d2870925baf682d690"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a PMOS common-source amplifier with an NMOS active load and gives an inverting gain. The actual circuit is an NMOS source follower with positive gain at or below unity; the golden solution assigns 0 to this topology error.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1326,
        "output_tokens": 7286,
        "total_tokens": 8612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1326,
        "output_tokens": 7286,
        "total_tokens": 8612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4833,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS Inverter**, a fundamental digital logic gate used in integrated circuits. Below is a detailed analysis of its structure, operation, and key characteristics.\n\n---\n\n### **1. Circuit Identification**\n- **Configuration**: The circuit consists of two complementary MOS transistors:\n  - **M₂ (Top Transistor)**: A **p-channel MOSFET (PMOS)** with its **source connected to \\( V_{DD} \\)** and **drain connected to \\( V_{out} \\)**.\n  - **M₁ (Bottom Transistor)**: An **n-channel MOSFET (NMOS)** with its **source connected to ground** and **drain connected to \\( V_{out} \\)**.\n- **Input**: Both gates of \\( M_1 \\) and \\( M_2 \\) are tied to \\( V_{in} \\).\n- **Output**: The common drain node of \\( M_1 \\) and \\( M_2 \\) forms \\( V_{out} \\).\n\nThis is the **classic CMOS inverter topology**, where the complementary behavior of PMOS and NMOS ensures low static power consumption and full rail-to-rail output swing.\n\n---\n\n---\n\n### **2. Operational Analysis**\nThe CMOS inverter operates in **three distinct regions** based on the input voltage \\( V_{in} \\):\n\n#### **Case 1: \\( V_{in} = 0 \\, \\text{V} \\) (Logic Low)**\n- **PMOS (M₂)**:\n  - Gate-to-source voltage \\( V_{GS2} = V_{in} - V_{DD} = -V_{DD} \\) (negative).\n  - Since \\( |V_{GS2}| > |V_{th,p}| \\) (threshold voltage for PMOS), **M₂ is ON**.\n- **NMOS (M₁)**:\n  - Gate-to-source voltage \\( V_{GS1} = V_{in} - 0 = 0 \\, \\text{V} \\).\n  - Since \\( V_{GS1} < V_{th,n} \\), **M₁ is OFF**.\n- **Result**: \\( V_{out} \\) is pulled **up to \\( V_{DD} \\)** (Logic High).\n\n#### **Case 2: \\( V_{in} = V_{DD} \\) (Logic High)**\n- **PMOS (M₂)**:\n  - \\( V_{GS2} = V_{in} - V_{DD} = 0 \\, \\text{V} \\).\n  - Since \\( |V_{GS2}| < |V_{th,p}| \\), **M₂ is OFF**.\n- **NMOS (M₁)**:\n  - \\( V_{GS1} = V_{in} - 0 = V_{DD} \\).\n  - Since \\( V_{GS1} > V_{th,n} \\), **M₁ is ON**.\n- **Result**: \\( V_{out} \\) is pulled **down to 0 V** (Logic Low).\n\n#### **Case 3: Transition Region (\\( 0 < V_{in} < V_{DD} \\))**\n- Both transistors are **partially ON**, forming a voltage divider.\n- The output \\( V_{out} \\) transitions from \\( V_{DD} \\) to 0 V as \\( V_{in} \\) increases.\n- The **switching threshold** (where \\( V_{in} = V_{out} \\)) occurs at approximately:\n  $$\n  V_{th} \\approx \\frac{V_{DD} + V_{th,n} - |V_{th,p}|}{2}\n  $$\n  For symmetric CMOS (\\( V_{th,n} = |V_{th,p}| \\)), this simplifies to \\( V_{th} \\approx \\frac{V_{DD}}{2} \\).\n\n---\n\n### **3. Key Characteristics**\n| **Parameter**               | **Description**                                                                 |\n|-----------------------------|---------------------------------------------------------------------------------|\n| **Logic Function**          | Inverts the input: \\( V_{out} = \\overline{V_{in}} \\).                          |\n| **Static Power Consumption**| **Near zero** in steady state (one transistor is always OFF).                   |\n| **Dynamic Power**           | Dominated by switching losses (\\( P \\propto f \\cdot C \\cdot V_{DD}^2 \\)).        |\n| **Output Swing**            | Full rail-to-rail: \\( 0 \\, \\text{V} \\rightarrow V_{DD} \\).                      |\n| **Noise Immunity**          | High due to sharp transition region (gain > 1 in the active region).            |\n| **Propagation Delay**       | Low (sub-nanosecond for modern CMOS).                                          |\n| **Fan-out**                 | High (can drive multiple subsequent gates).                                     |\n\n---\n\n### **4. Transfer Characteristic**\n- **Shape**: The \\( V_{out} \\) vs. \\( V_{in} \\) curve is **S-shaped**, with:\n  - **High-gain region** around \\( V_{in} \\approx \\frac{V_{DD}}{2} \\).\n  - **Flat regions** at \\( V_{in} = 0 \\) (output = \\( V_{DD} \\)) and \\( V_{in} = V_{DD} \\) (output = 0 V).\n- **Hysteresis**: None (ideal inverter has a single transition point).\n\n![CMOS Inverter Transfer Curve](https://www.electronics-tutorials.ws/wp-content/uploads/2018/05/comb-comb4.gif)\n*(Example of a typical CMOS inverter transfer characteristic)*\n\n---\n\n### **5. Practical Considerations**\n- **Threshold Voltage Mismatch**: If \\( V_{th,n} \\neq |V_{th,p}| \\), the switching threshold shifts.\n- **Leakage Current**: Subthreshold leakage (from OFF transistors) and gate leakage (in advanced nodes) contribute to **static power**.\n- **Scaling**: As technology scales down (e.g., 7 nm, 5 nm), \\( V_{DD} \\) decreases, reducing power but increasing leakage.\n- **Applications**: Used in **digital logic circuits** (e.g., microprocessors, memory) due to its efficiency and scalability.\n\n---\n\n### **6. Summary**\nThe circuit is a **CMOS inverter** with the following behavior:\n- **Input = 0 V** → **Output = \\( V_{DD} \\)** (Logic High).\n- **Input = \\( V_{DD} \\)** → **Output = 0 V** (Logic Low).\n- **Advantages**: Low static power, full output swing, high noise immunity, and compatibility with digital logic systems.\n\nThis configuration is the **cornerstone of modern digital electronics**, enabling the construction of complex circuits like flip-flops, adders, and microprocessors.",
        "format": "markdown",
        "sha256": "39f9dc8f9d585f91dfbcd3fd43acf7744f5fed8a6200a9ec1c8b624cc77e4d85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with a PMOS pull-up and NMOS pull-down, and describes the correct inversion and rail-level operation. Minor simplifications in the optional switching-threshold discussion do not contradict the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 2432,
        "total_tokens": 2771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 2432,
        "total_tokens": 2771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS inverter**, a fundamental building block in digital integrated circuits. Here's a detailed analysis:\n\n---\n\n### **1. Circuit Configuration**\n- **Transistors**:\n  - **M₂ (Top transistor)**: **PMOS** (P-channel MOSFET), with its **source connected to V<sub>DD</sub>** and **drain to V<sub>out</sub>**.\n  - **M₁ (Bottom transistor)**: **NMOS** (N-channel MOSFET), with its **source connected to ground** and **drain to V<sub>out</sub>**.\n- **Input**: Both gates of M₁ and M₂ are tied to **V<sub>in</sub>**.\n- **Output**: The drains of M₁ and M₂ are connected at **V<sub>out</sub>**.\n\nThis is a **complementary pair** (CMOS), where one transistor conducts while the other is off, minimizing static power dissipation.\n\n---\n\n### **2. Operating Principle**\nThe CMOS inverter inverts the input signal (**V<sub>in</sub> → V<sub>out</sub> = NOT V<sub>in</sub>**):\n\n| **V<sub>in</sub>** | **M₂ (PMOS)** | **M₁ (NMOS)** | **V<sub>out</sub>** | **Power Consumption** |\n|---------------------|----------------|----------------|----------------------|-----------------------|\n| **0V (Low)**        | **ON** (V<sub>SG</sub> = V<sub>DD</sub> > |V<sub>thp</sub>|) | **OFF** (V<sub>GS</sub> = 0 < V<sub>thn</sub>) | **V<sub>DD</sub>** | **~0** (Static) |\n| **V<sub>DD</sub> (High)** | **OFF** (V<sub>SG</sub> = 0 < |V<sub>thp</sub>|) | **ON** (V<sub>GS</sub> = V<sub>DD</sub> > V<sub>thn</sub>) | **0V** | **~0** (Static) |\n| **Transition (0 < V<sub>in</sub> < V<sub>DD</sub>)** | **Partially ON** | **Partially ON** | **V<sub>out</sub> transitions from V<sub>DD</sub> to 0V** | **Dynamic** (During switching) |\n\n- **Static Power**: Near **zero** when V<sub>in</sub> is stable (one transistor is off, no DC current path).\n- **Dynamic Power**: Occurs **only during switching** (when both transistors conduct briefly), given by:\n  $$\n  P_{\\text{dynamic}} = C_L \\cdot V_{DD}^2 \\cdot f\n  $$\n  where $ C_L $ = load capacitance, $ f $ = switching frequency.\n\n---\n\n### **3. Voltage Transfer Characteristic (VTC)**\n- **High Input (V<sub>in</sub> = V<sub>DD</sub>)**:\n  - M₁ (NMOS) is **ON**, pulling V<sub>out</sub> to **0V**.\n  - M₂ (PMOS) is **OFF**.\n- **Low Input (V<sub>in</sub> = 0V)**:\n  - M₂ (PMOS) is **ON**, pulling V<sub>out</sub> to **V<sub>DD</sub>**.\n  - M₁ (NMOS) is **OFF**.\n- **Switching Threshold (V<sub>M</sub>)**:\n  - The midpoint where V<sub>in</sub> = V<sub>out</sub> (typically **~V<sub>DD</sub>/2** for symmetric CMOS).\n  - **Gain** is highest here, enabling sharp transitions (ideal for digital logic).\n\n---\n\n### **4. Key Advantages**\n- **Full Rail-to-Rail Output**: V<sub>out</sub> swings from **0V to V<sub>DD</sub>** (unlike NMOS-only or PMOS-only logic).\n- **High Noise Immunity**: Strong noise margins due to sharp VTC transition.\n- **Low Static Power**: Only leakage current flows when stable (critical for energy efficiency).\n- **High Input Impedance**: MOSFET gates are insulated (no DC current draw from input).\n\n---\n\n### **5. Limitations**\n- **Dynamic Power**: Scales with $ V_{DD}^2 $ and frequency (a concern in high-speed circuits).\n- **Delay**: Switching speed depends on transistor sizes and load capacitance.\n\n---\n\n### **Conclusion**\nThis circuit is a **CMOS inverter**, the cornerstone of modern digital logic. It inverts the input signal with **minimal static power loss**, **full voltage swing**, and **high reliability**, making it ideal for low-power, high-performance applications like microprocessors and memory chips. The analysis confirms its role as a **non-inverting buffer’s inverse** (i.e., a NOT gate) with superior efficiency compared to alternative logic families (e.g., NMOS or TTL).",
        "format": "markdown",
        "sha256": "3cda0222e41eeb83b3eeb4ca0b8ec770c9784f1ea9bcd6d82cc0a2b4cb884c7a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its PMOS pull-up, NMOS pull-down, and complementary operation. The extra analysis is consistent with inverter behavior.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 2388,
        "total_tokens": 2727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 2388,
        "total_tokens": 2727,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1251,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **CMOS inverter**, a fundamental building block in digital logic design. Below is a structured analysis of its operation, behavior, and key characteristics:\n\n---\n\n### **1. Circuit Identification**\n- **Transistors**:  \n  - **M₂ (Top transistor)**: PMOS (p-channel MOSFET) connected to **V<sub>DD</sub>** (source) and **V<sub>out</sub>** (drain).  \n  - **M₁ (Bottom transistor)**: NMOS (n-channel MOSFET) connected to **ground** (source) and **V<sub>out</sub>** (drain).  \n- **Input**: **V<sub>in</sub>** is applied to the gates of both transistors.  \n- **Output**: **V<sub>out</sub>** is the common drain node of M₁ and M₂.  \n\nThis configuration is the **standard CMOS inverter**, where the PMOS acts as a **pull-up** transistor and the NMOS as a **pull-down** transistor.\n\n---\n\n---\n\n### **2. Operational Behavior**\nThe circuit inverts the input signal (**V<sub>out</sub> = NOT V<sub>in</sub>**) with two stable states:\n\n| **Input (V<sub>in</sub>)** | **M₂ (PMOS)** | **M₁ (NMOS)** | **Output (V<sub>out</sub>)** | **State**          |\n|----------------------------|----------------|----------------|-------------------------------|--------------------|\n| **0 V (Logic 0)**          | **ON**         | **OFF**        | **V<sub>DD</sub> (Logic 1)**  | Pull-up active     |\n| **V<sub>DD</sub> (Logic 1)**| **OFF**        | **ON**         | **0 V (Logic 0)**            | Pull-down active   |\n\n- **When V<sub>in</sub> = 0 V**:  \n  - M₂ (PMOS) is **ON** (V<sub>GS</sub> = V<sub>DD</sub> > |V<sub>thp</sub>|), pulling **V<sub>out</sub>** to **V<sub>DD</sub>**.  \n  - M₁ (NMOS) is **OFF** (V<sub>GS</sub> = 0 < V<sub>thn</sub>), so no current flows to ground.  \n\n- **When V<sub>in</sub> = V<sub>DD</sub>**:  \n  - M₂ (PMOS) is **OFF** (V<sub>GS</sub> = 0 < |V<sub>thp</sub>|), disconnecting V<sub>DD</sub>.  \n  - M₁ (NMOS) is **ON** (V<sub>GS</sub> = V<sub>DD</sub> > V<sub>thn</sub>), pulling **V<sub>out</sub>** to **0 V**.  \n\n- **During Transition (V<sub>in</sub> between 0 and V<sub>DD</sub>)**:  \n  Both transistors may conduct briefly, creating a **low-impedance path** from V<sub>DD</sub> to ground. This is the **switching region**, where the output voltage transitions between **V<sub>DD</sub>** and **0 V**.  \n  - The **switching threshold (V<sub>M</sub>)** occurs when **V<sub>in</sub> = V<sub>out</sub>**. For a symmetric inverter (V<sub>thn</sub> = |V<sub>thp</sub>| and matched (W/L) ratios), **V<sub>M</sub> ≈ V<sub>DD</sub>/2**.\n\n---\n\n---\n\n### **3. Key Characteristics**\n#### **(a) Voltage Transfer Characteristic (VTC)**\n- The **VTC** plots **V<sub>out</sub> vs. V<sub>in</sub>** and has a **steep transition** near **V<sub>DD</sub>/2**.  \n- **Noise Margins**:  \n  - **Input Low Noise Margin (NM<sub>L</sub>)**: Defined as **V<sub>IL</sub> – V<sub>OL</sub>**, where **V<sub>IL</sub>** is the maximum input voltage recognized as \"0\" and **V<sub>OL</sub>** ≈ 0 V.  \n  - **Input High Noise Margin (NM<sub>H</sub>)**: Defined as **V<sub>OH</sub> – V<sub>IH</sub>**, where **V<sub>OH</sub>** ≈ V<sub>DD</sub> and **V<sub>IH</sub>** is the minimum input voltage recognized as \"1\".  \n  - For a symmetric CMOS inverter, **NM<sub>L</sub> ≈ NM<sub>H</sub> ≈ 0.4–0.5 V<sub>DD</sub>**.\n\n#### **(b) Power Consumption**\n- **Static Power (P<sub>static</sub>)**:  \n  - **Near zero** in stable states (no DC path from V<sub>DD</sub> to ground).  \n  - Only **leakage currents** (subthreshold, gate oxide) contribute, which are negligible in modern CMOS.  \n- **Dynamic Power (P<sub>dynamic</sub>)**:  \n  Dominated by **switching losses**:  \n  $$\n  P_{\\text{dynamic}} = \\alpha \\cdot C_L \\cdot V_{DD}^2 \\cdot f\n  $$  \n  where:  \n  - **α** = Activity factor (fraction of time the circuit switches),  \n  - **C<sub>L</sub>** = Load capacitance,  \n  - **f** = Operating frequency.  \n\n#### **(c) Transistor Operating Regions**\n| **Input (V<sub>in</sub>)** | **M₂ (PMOS)** | **M₁ (NMOS)** |\n|----------------------------|----------------|----------------|\n| **V<sub>in</sub> = 0 V**   | **Triode** (V<sub>DS</sub> = 0) | **Cutoff** |\n| **V<sub>in</sub> = V<sub>DD</sub>/2** | **Saturation** | **Saturation** |\n| **V<sub>in</sub> = V<sub>DD</sub>** | **Cutoff** | **Triode** (V<sub>DS</sub> = 0) |\n\n- **Triode Region**: Occurs when **V<sub>DS</sub> < V<sub>GS</sub> – |V<sub>th</sub>|** (for PMOS) or **V<sub>DS</sub> < V<sub>GS</sub> – V<sub>th</sub>** (for NMOS).  \n- **Saturation Region**: Occurs when **V<sub>DS</sub> ≥ V<sub>GS</sub> – |V<sub>th</sub>|** (PMOS) or **V<sub>DS</sub> ≥ V<sub>GS</sub> – V<sub>th</sub>** (NMOS).\n\n---\n\n---\n\n### **4. Advantages of CMOS Inverter**\n1. **Full-Rail Output**: **V<sub>out</sub>** swings from **0 V to V<sub>DD</sub>**, maximizing noise immunity.  \n2. **Low Static Power**: Ideal for battery-powered devices.  \n3. **High Input Impedance**: Gates of MOSFETs draw negligible current.  \n4. **Scalability**: Works across a wide range of supply voltages (from sub-1V to several volts).  \n5. **Complementary Operation**: Only one transistor conducts in static states, minimizing leakage.\n\n---\n---\n### **5. Summary**\nThe circuit is a **CMOS inverter**, which:\n- **Inverts** the input signal (**V<sub>out</sub> = ¬V<sub>in</sub>**).  \n- Operates with **near-zero static power** due to complementary transistor action.  \n- Has a **sharp voltage transfer characteristic** with a switching threshold at **~V<sub>DD</sub>/2**.  \n- Exhibits **high noise margins** and **full-rail output swing**.  \n- Is the **cornerstone of CMOS digital logic**, used in all modern microprocessors and ICs.\n\nFor deeper analysis, one could derive the **VTC equation**, calculate **propagation delay**, or optimize transistor sizing for speed/power trade-offs. However, the core functionality and advantages are as described above.",
        "format": "markdown",
        "sha256": "d5a1c2592d0376a90d009482a1b5ccfa6eb1969a6500b423d095ffef959413d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the standard CMOS inverter, with a PMOS pull-up and NMOS pull-down, and describes the correct logic operation. The golden solution gives full credit for this identification; the additional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 3322,
        "total_tokens": 3661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 3322,
        "total_tokens": 3661,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1355,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: CMOS Inverter**\n\nThe circuit shown is a **CMOS (Complementary Metal-Oxide-Semiconductor) Inverter**, a fundamental building block in digital logic circuits. Below is a detailed analysis of its structure, operation, and key characteristics.\n\n---\n\n---\n\n## **🔹 1. Circuit Configuration**\n- **Transistors**:\n  - **M₁**: **PMOS** (P-channel MOSFET) with its **source connected to \\( V_{DD} \\)** and **drain connected to \\( V_{out} \\)**.\n  - **M₂**: **NMOS** (N-channel MOSFET) with its **source grounded** and **drain connected to \\( V_{out} \\)**.\n- **Input**: \\( V_{in} \\) drives the **gates of both M₁ and M₂** (tied together).\n- **Output**: \\( V_{out} \\) is taken from the **common drain node** of M₁ and M₂.\n\n> ✅ **This is a classic CMOS inverter**, where the PMOS (M₁) acts as the **pull-up network (PUN)** and the NMOS (M₂) acts as the **pull-down network (PDN)**.\n\n---\n\n---\n\n## **🔹 2. Operating Principle**\n\n### **📌 Case 1: \\( V_{in} = 0 \\) (Logic Low)**\n- **M₁ (PMOS)**:\n  - \\( V_{GS} = V_{in} - V_{DD} = -V_{DD} \\) (negative, so **ON** if \\( |V_{GS}| > |V_{TP}| \\)).\n  - Acts as a **closed switch** between \\( V_{DD} \\) and \\( V_{out} \\).\n- **M₂ (NMOS)**:\n  - \\( V_{GS} = V_{in} - 0 = 0 \\) (less than \\( V_{TN} \\), so **OFF**).\n  - Acts as an **open switch** between \\( V_{out} \\) and ground.\n- **Result**: \\( V_{out} = V_{DD} \\) (Logic High).\n\n### **📌 Case 2: \\( V_{in} = V_{DD} \\) (Logic High)**\n- **M₁ (PMOS)**:\n  - \\( V_{GS} = V_{in} - V_{DD} = 0 \\) (greater than \\( V_{TP} \\), so **OFF**).\n  - Acts as an **open switch**.\n- **M₂ (NMOS)**:\n  - \\( V_{GS} = V_{in} - 0 = V_{DD} \\) (greater than \\( V_{TN} \\), so **ON**).\n  - Acts as a **closed switch** between \\( V_{out} \\) and ground.\n- **Result**: \\( V_{out} = 0 \\) (Logic Low).\n\n### **📌 Case 3: \\( V_{in} \\) in Transition (e.g., \\( V_{DD}/2 \\))**\n- Both transistors are **partially ON**, conducting current.\n- The output voltage \\( V_{out} \\) transitions smoothly from \\( V_{DD} \\) to 0.\n- The **switching threshold** (\\( V_M \\)) is the input voltage where \\( V_{in} = V_{out} \\). For a **symmetric inverter** (matched \\( W/L \\) ratios), \\( V_M \\approx V_{DD}/2 \\).\n\n---\n\n---\n\n## **🔹 3. Voltage Transfer Characteristic (VTC)**\nThe **VTC** plots \\( V_{out} \\) vs. \\( V_{in} \\). Key features:\n- **Region 1 (Pull-Up)**: \\( V_{in} < V_M \\) → \\( V_{out} \\approx V_{DD} \\) (M₁ ON, M₂ OFF).\n- **Region 2 (Transition)**: \\( V_{in} \\approx V_M \\) → Both transistors conduct; \\( V_{out} \\) drops from \\( V_{DD} \\) to 0.\n- **Region 3 (Pull-Down)**: \\( V_{in} > V_M \\) → \\( V_{out} \\approx 0 \\) (M₁ OFF, M₂ ON).\n- **Slope**: The VTC has a **sharp transition** (near-vertical slope) due to complementary operation, ensuring **high noise immunity**.\n\n> 📉 **Graphical Behavior**: The VTC is **inverting** and **highly non-linear**, with a steep transition region.\n\n---\n\n---\n\n## **🔹 4. Noise Margins**\nNoise margins quantify the circuit’s **immunity to noise**. For a CMOS inverter:\n- **\\( V_{OH} = V_{DD} \\)** (High output level)\n- **\\( V_{OL} = 0 \\)** (Low output level)\n- **\\( V_{IH} \\)**: Maximum input voltage recognized as logic **1** (where slope = -1).\n- **\\( V_{IL} \\)**: Minimum input voltage recognized as logic **0** (where slope = -1).\n\n| **Noise Margin** | **Formula**               | **Typical Value (Symmetric CMOS)** |\n|------------------|---------------------------|------------------------------------|\n| \\( NM_H \\)       | \\( V_{OH} - V_{IH} \\)     | ~0.45 \\( V_{DD} \\)                |\n| \\( NM_L \\)       | \\( V_{IL} - V_{OL} \\)     | ~0.45 \\( V_{DD} \\)                |\n\n> ✅ **High noise margins** (typically **40–50% of \\( V_{DD} \\)**) make CMOS inverters **robust against noise**.\n\n---\n\n---\n\n## **🔹 5. Power Dissipation**\n- **Static Power (DC)**:\n  - **Near zero** in steady state (either M₁ or M₂ is OFF, so **no DC current path** from \\( V_{DD} \\) to ground).\n  - Only **leakage currents** (subthreshold, gate tunneling) contribute, which are negligible in ideal analysis.\n  \n- **Dynamic Power (AC)**:\n  - Occurs **only during switching** (when \\( V_{in} \\) transitions).\n  - Dominated by **capacitive charging/discharging**:\n    \\[\n    P_{dynamic} = \\alpha C_L V_{DD}^2 f\n    \\]\n    where:\n    - \\( \\alpha \\): Activity factor (0–1),\n    - \\( C_L \\): Load capacitance,\n    - \\( f \\): Operating frequency.\n\n> ✅ **CMOS is energy-efficient** for digital circuits due to **zero static power** and **low dynamic power** at moderate frequencies.\n\n---\n\n---\n\n## **🔹 6. Propagation Delay**\n- **Delay** occurs due to the time required to **charge/discharge** the load capacitance \\( C_L \\) through the transistors.\n- **Rise Time (\\( t_{PHL} \\))**: Time for \\( V_{out} \\) to go from 50% \\( V_{DD} \\) to 90% \\( V_{DD} \\) (when \\( V_{in} \\) transitions from high to low).\n- **Fall Time (\\( t_{PLH} \\))**: Time for \\( V_{out} \\) to go from 50% \\( V_{DD} \\) to 10% \\( V_{DD} \\) (when \\( V_{in} \\) transitions from low to high).\n- **Total Propagation Delay**:\n  \\[\n  t_p = \\frac{t_{PHL} + t_{PLH}}{2}\n  \\]\n- **Factors Affecting Delay**:\n  - \\( C_L \\): Higher \\( C_L \\) → Slower switching.\n  - \\( V_{DD} \\): Higher \\( V_{DD} \\) → Faster switching (but increases power).\n  - Transistor sizing (\\( W/L \\)): Larger \\( W/L \\) → Higher drive strength → Faster switching.\n\n---\n\n---\n\n## **🔹 7. Key Advantages of CMOS Inverter**\n| **Feature**               | **Advantage**                                                                 |\n|---------------------------|-------------------------------------------------------------------------------|\n| **Complementary Operation** | Full rail-to-rail output swing (\\( 0 \\) to \\( V_{DD} \\)).                   |\n| **Low Static Power**      | Near-zero power consumption in steady state.                                 |\n| **High Noise Immunity**   | Large noise margins (~45% of \\( V_{DD} \\)).                                   |\n| **Scalability**           | Works well across a wide range of \\( V_{DD} \\) (from 0.5V to 5V).             |\n| **High Speed**            | Fast switching due to strong drive currents from both NMOS and PMOS.        |\n\n---\n\n---\n\n## **🔹 8. Summary of Behavior**\n| **Input (\\( V_{in} \\))** | **M₁ (PMOS)** | **M₂ (NMOS)** | **Output (\\( V_{out} \\))** | **Logic Function** |\n|--------------------------|----------------|----------------|-----------------------------|--------------------|\n| **0 (Low)**              | ON             | OFF            | \\( V_{DD} \\) (High)         | **NOT (Inversion)** |\n| **\\( V_{DD} \\) (High)** | OFF            | ON             | 0 (Low)                     | **NOT (Inversion)** |\n| **Intermediate**         | Partially ON   | Partially ON   | Transitioning               | -                  |\n\n> 🔁 **Function**: \\( V_{out} = \\overline{V_{in}} \\) (Logical NOT operation).\n\n---\n\n---\n\n## **🔹 Conclusion**\nThe circuit is a **CMOS inverter**, which:\n- **Inverts** the input signal (\\( V_{out} = \\overline{V_{in}} \\)),\n- Exhibits **rail-to-rail output swing** (0 to \\( V_{DD} \\)),\n- Has **excellent noise immunity** and **near-zero static power dissipation**,\n- Is **highly scalable** and **energy-efficient**, making it the **cornerstone of modern digital IC design**.\n\n> 💡 **Practical Note**: In real-world designs, transistor sizing (\\( W/L \\)) is optimized to balance **speed**, **power**, and **noise margins** based on application requirements.",
        "format": "markdown",
        "sha256": "ee825183d035aaf4eb78e9fd12df6113a5bbab5d0cab0884104b5967f0de9ed3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the upper transistor as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter. The golden solution requires recognizing that both devices are NMOS.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 3445,
        "total_tokens": 3784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 3445,
        "total_tokens": 3784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS Inverter**, a fundamental building block in digital integrated circuits. Below is a detailed analysis:\n\n---\n\n### **🔹 Circuit Configuration**\n- **M₁**: **PMOS transistor** (P-channel MOSFET)\n  - Source connected to **V<sub>DD</sub>** (power supply).\n  - Gate connected to **V<sub>in</sub>** (input).\n  - Drain connected to **V<sub>out</sub>** (output).\n- **M₂**: **NMOS transistor** (N-channel MOSFET)\n  - Source connected to **Ground (GND)**.\n  - Gate connected to **V<sub>in</sub>**.\n  - Drain connected to **V<sub>out</sub>**.\n\nThis is the **standard CMOS inverter topology**, where the gates of both transistors are tied together (input), and their drains are tied together (output).\n\n---\n\n---\n\n### **🔹 Static Behavior (DC Analysis)**\nThe inverter operates in **three regions** based on the input voltage **V<sub>in</sub>**:\n\n| **V<sub>in</sub>** | **M₁ (PMOS)** | **M₂ (NMOS)** | **V<sub>out</sub>** | **Logic State** |\n|---------------------|----------------|----------------|----------------------|------------------|\n| **0 V (LOW)**      | **ON**         | **OFF**        | **V<sub>DD</sub> (HIGH)** | Inverts to HIGH |\n| **V<sub>DD</sub> (HIGH)** | **OFF**    | **ON**         | **0 V (LOW)**       | Inverts to LOW  |\n| **V<sub>DD</sub>/2** | **Partially ON** | **Partially ON** | **V<sub>DD</sub>/2** | **Switching Threshold (V<sub>M</sub>)** |\n\n#### **Key Observations:**\n1. **No Static Power Dissipation**:\n   - When **V<sub>in</sub> = 0 V**, M₁ is ON (conducting), and M₂ is OFF. **No DC current path** exists between V<sub>DD</sub> and GND → **P<sub>static</sub> ≈ 0**.\n   - When **V<sub>in</sub> = V<sub>DD</sub>**, M₂ is ON, and M₁ is OFF → Again, **no DC current path** → **P<sub>static</sub> ≈ 0**.\n   - Static power is **negligible** (only leakage currents).\n\n2. **Switching Threshold (V<sub>M</sub>)**:\n   - The point where **V<sub>in</sub> = V<sub>out</sub>** (input = output).\n   - For a **symmetric inverter** (M₁ and M₂ sized identically), **V<sub>M</sub> ≈ V<sub>DD</sub>/2**.\n   - If transistors are **asymmetric**, V<sub>M</sub> shifts (e.g., larger PMOS → V<sub>M</sub> > V<sub>DD</sub>/2).\n\n3. **Voltage Transfer Characteristic (VTC)**:\n   - A plot of **V<sub>out</sub> vs. V<sub>in</sub>** shows:\n     - **High gain** in the transition region (sharp switch between HIGH and LOW).\n     - **Noise margins** (NM<sub>H</sub> and NM<sub>L</sub>) are high due to rail-to-rail output swing.\n\n---\n\n---\n\n### **🔹 Dynamic Behavior (AC Analysis)**\n1. **Propagation Delay (t<sub>p</sub>)**:\n   - Time taken for the output to switch between logic levels.\n   - Depends on:\n     - **Load capacitance (C<sub>L</sub>)** (e.g., next stage’s input capacitance).\n     - **Transistor sizes (W/L ratio)** → Larger transistors reduce delay.\n     - **V<sub>DD</sub> level** → Higher V<sub>DD</sub> reduces delay (but increases power).\n\n2. **Power Consumption**:\n   - **Dynamic Power (P<sub>dyn</sub>)**:\n     \\[\n     P_{\\text{dyn}} = \\alpha \\cdot C_L \\cdot V_{DD}^2 \\cdot f\n     \\]\n     - **α**: Activity factor (fraction of time the input switches).\n     - **C<sub>L</sub>**: Load capacitance.\n     - **f**: Operating frequency.\n   - **Short-Circuit Power (P<sub>sc</sub>)**:\n     - Occurs briefly during switching when both M₁ and M₂ are **partially ON**, creating a temporary current path from V<sub>DD</sub> to GND.\n     - Typically **< 10% of P<sub>dyn</sub>** for well-designed inverters.\n\n3. **Rise/Fall Times**:\n   - **Rise time (t<sub>r</sub>)** (0 → V<sub>DD</sub>): Dominated by **M₁ (PMOS)**.\n   - **Fall time (t<sub>f</sub>)** (V<sub>DD</sub> → 0): Dominated by **M₂ (NMOS)**.\n   - To balance rise/fall times, **PMOS is typically sized 2–3× larger than NMOS** (since hole mobility in PMOS is ~2–3× lower than electron mobility in NMOS).\n\n---\n\n---\n\n### **🔹 Key Advantages of CMOS Inverter**\n1. **Full Rail-to-Rail Output Swing**:\n   - Output swings from **0 V to V<sub>DD</sub>**, maximizing noise immunity.\n2. **High Input Impedance**:\n   - MOSFET gates are insulated (oxide layer), so **no static input current**.\n3. **Low Power Consumption**:\n   - Only consumes power **during switching** (dynamic power).\n4. **Scalability**:\n   - Works well at **nanometer-scale** technologies (e.g., 7 nm, 5 nm).\n\n---\n\n---\n\n### **🔹 Limitations**\n1. **Static Leakage Current**:\n   - Subthreshold leakage (I<sub>off</sub>) increases with **scaling** (smaller threshold voltages).\n2. **Short-Circuit Current**:\n   - Brief power dissipation during switching (minimized by fast transitions).\n3. **Dependence on V<sub>DD</sub>**:\n   - Lower V<sub>DD</sub> reduces power but **degrades noise margins** and speed.\n\n---\n\n---\n\n### **🔹 Summary**\n| **Parameter**       | **Value/Behavior**                          |\n|----------------------|---------------------------------------------|\n| **Function**         | Digital inverter (NOT gate)                 |\n| **Static Power**     | ≈ 0 (only leakage)                          |\n| **Dynamic Power**    | ∝ C<sub>L</sub> · V<sub>DD</sub>² · f     |\n| **Switching Threshold** | ~ V<sub>DD</sub>/2 (symmetric design)    |\n| **Noise Margins**    | High (due to rail-to-rail swing)            |\n| **Propagation Delay**| Depends on W/L, C<sub>L</sub>, V<sub>DD</sub> |\n\n---\n\n### **🔹 Conclusion**\nThis circuit is a **classic CMOS inverter**, which:\n- **Inverts** the input logic level (0 → V<sub>DD</sub>, V<sub>DD</sub> → 0).\n- **Consumes near-zero static power** (ideal for battery-powered devices).\n- **Forms the basis for all CMOS logic gates** (e.g., NAND, NOR, etc.).\n\nFor deeper analysis, you could:\n1. Derive the **VTC mathematically** using MOSFET equations.\n2. Simulate in **SPICE** (e.g., LTspice) to observe transient behavior.\n3. Optimize transistor sizing for **speed/power trade-offs**.",
        "format": "markdown",
        "sha256": "a69c4a90946b6b9e214baa44028b1ffbd0e723d340fdb7d80ec6421019f4fc1a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary complementary CMOS inverter. Both contradict the essential topology: both devices are NMOS, so the circuit is not a normal inverter.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 2596,
        "total_tokens": 2935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 2596,
        "total_tokens": 2935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS inverter**, a fundamental building block in digital integrated circuits. Here’s a detailed analysis:\n\n---\n\n### **1. Circuit Identification & Topology**\n- **M₁**: **PMOS transistor** (p-channel MOSFET)\n  - Source connected to **V<sub>DD</sub>** (power supply)\n  - Gate connected to **V<sub>in</sub>** (input)\n  - Drain connected to **V<sub>out</sub>** (output)\n- **M₂**: **NMOS transistor** (n-channel MOSFET)\n  - Source connected to **ground (GND)**\n  - Gate connected to **V<sub>in</sub>**\n  - Drain connected to **V<sub>out</sub>**\n\nThis is the **standard CMOS inverter configuration**, where the PMOS and NMOS are **complementary** (one is ON while the other is OFF in static states).\n\n---\n\n---\n\n### **2. Static Behavior (DC Analysis)**\nThe inverter operates as a **voltage inverter**:\n- **When V<sub>in</sub> = 0 V (Logic 0):**\n  - **M₂ (NMOS)**: Gate-source voltage (**V<sub>GS2</sub> = 0 V**) → **OFF** (no conduction).\n  - **M₁ (PMOS)**: Gate-source voltage (**V<sub>GS1</sub> = V<sub>DD</sub> - 0 = V<sub>DD</sub>**) → **ON** (conducts).\n  - **Result**: V<sub>out</sub> ≈ **V<sub>DD</sub>** (Logic 1).\n\n- **When V<sub>in</sub> = V<sub>DD</sub> (Logic 1):**\n  - **M₁ (PMOS)**: **V<sub>GS1</sub> = V<sub>DD</sub> - V<sub>DD</sub> = 0 V** → **OFF**.\n  - **M₂ (NMOS)**: **V<sub>GS2</sub> = V<sub>DD</sub> - 0 = V<sub>DD</sub>** → **ON**.\n  - **Result**: V<sub>out</sub> ≈ **0 V** (Logic 0).\n\n**Conclusion**:  \nThe circuit **inverts the input signal**:  \n**V<sub>out</sub> = NOT V<sub>in</sub>** (boolean logic).\n\n---\n\n---\n\n### **3. Key Characteristics**\n#### **(a) Static Power Dissipation**\n- In **steady state** (V<sub>in</sub> = 0 or V<sub>DD</sub>), **one transistor is OFF**, so **no direct current path** exists between V<sub>DD</sub> and GND.\n- **Static power ≈ 0** (only leakage currents, negligible in ideal cases).\n\n#### **(b) Dynamic Power Dissipation**\n- Occurs **during switching** (when V<sub>in</sub> transitions between 0 and V<sub>DD</sub>).\n- Dominated by **capacitive charging/discharging** of the output node (and transistor capacitances).\n- Formula:  \n  $$\n  P_{\\text{dynamic}} = \\alpha C_L V_{DD}^2 f\n  $$  \n  where:\n  - \\( \\alpha \\) = switching activity factor (0 ≤ \\( \\alpha \\) ≤ 1),\n  - \\( C_L \\) = load capacitance,\n  - \\( f \\) = operating frequency.\n\n#### **(c) Voltage Transfer Characteristic (VTC)**\n- The **VTC** plots **V<sub>out</sub> vs. V<sub>in</sub>**.\n- **Transition region**: Sharp switch near **V<sub>in</sub> = V<sub>DD</sub>/2** (for symmetric sizing of M₁ and M₂).\n- **Noise Margins**:\n  - **High Noise Margin (NM<sub>H</sub>)**: Tolerance to input noise when V<sub>in</sub> = 1.\n  - **Low Noise Margin (NM<sub>L</sub>)**: Tolerance to input noise when V<sub>in</sub> = 0.\n  - CMOS inverters have **excellent noise immunity** due to high NM<sub>H</sub> and NM<sub>L</sub>.\n\n#### **(d) Input/Output Impedance**\n- **Input Impedance**: Very high (gates of MOSFETs are insulated by SiO₂, so **no DC current** flows into the input).\n- **Output Impedance**: Low when driving a load (due to the push-pull action of M₁ and M₂).\n\n---\n\n---\n\n### **4. Transient Behavior**\n- **Rise Time (t<sub>r</sub>)**: Time for V<sub>out</sub> to transition from 0 to V<sub>DD</sub> (dominated by M₁ charging the load capacitance).\n- **Fall Time (t<sub>f</sub>)**: Time for V<sub>out</sub> to transition from V<sub>DD</sub> to 0 (dominated by M₂ discharging the load capacitance).\n- **Propagation Delay (t<sub>pd</sub>)**: Time delay between input transition and output transition (typically **10–100 ps** in modern CMOS).\n\n---\n\n---\n\n### **5. Ideal vs. Real-World Behavior**\n| **Parameter**          | **Ideal CMOS Inverter** | **Real-World Considerations** |\n|------------------------|-------------------------|-------------------------------|\n| Static Power           | 0                       | Leakage currents (subthreshold, gate oxide) |\n| V<sub>out</sub> (High) | Exactly V<sub>DD</sub>  | Slightly less due to M₁ threshold drop |\n| V<sub>out</sub> (Low)  | Exactly 0 V             | Slightly above 0 due to M₂ threshold drop |\n| Transition Sharpness   | Instantaneous           | Slew rate limited by transistor strength |\n\n---\n\n---\n\n### **6. Applications**\n- **Digital Logic**: Core component in **static CMOS logic** (e.g., AND, OR, NAND, NOR gates).\n- **Signal Inversion**: Used in oscillators, buffers, and level shifters.\n- **Memory Cells**: Forms the basis of **SRAM** (e.g., 6T SRAM cell).\n\n---\n\n---\n\n### **Summary**\nThe circuit is a **CMOS inverter** with the following properties:\n- **Function**: Inverts the input signal (**V<sub>out</sub> = ¬V<sub>in</sub>**).\n- **Static Power**: Near-zero (ideal case).\n- **Dynamic Power**: Dominated by capacitive switching.\n- **Noise Immunity**: High due to complementary transistor action.\n- **Speed**: Fast switching (low propagation delay).\n\nThis configuration is **ubiquitous in modern digital ICs** due to its **low power, high speed, and robustness**.",
        "format": "markdown",
        "sha256": "42e506cc8c10c2e8464fc4d0e1881c768664eeb652ec83caaf7865aa44db89b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter. The golden solution requires recognizing both devices as NMOS; this topology error receives 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 1886,
        "total_tokens": 2225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 339,
        "output_tokens": 1886,
        "total_tokens": 2225,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 345,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS Inverter**, a fundamental building block in digital and analog integrated circuits. It consists of a **p-channel MOSFET (M₂)** and an **n-channel MOSFET (M₁)** connected in series between the power supply $ V_{DD} $ and ground. Below is a comprehensive analysis of its behavior:\n\n---\n\n---\n\n## **1. Circuit Configuration & Operation**\n- **M₁ (nMOS):**  \n  - **Source:** Ground  \n  - **Gate:** Input $ V_{in} $  \n  - **Drain:** Output $ V_{out} $  \n- **M₂ (pMOS):**  \n  - **Source:** $ V_{DD} $  \n  - **Gate:** Input $ V_{in} $  \n  - **Drain:** Output $ V_{out} $  \n\nBoth transistors share the **same input gate voltage** ($ V_{in} $) and **same output drain node** ($ V_{out} $). This configuration ensures:\n- When $ V_{in} = 0 $:  \n  - M₁ is **OFF** (nMOS requires $ V_{GS} > V_{thn} $ to turn on).  \n  - M₂ is **ON** (pMOS turns on when $ V_{SG} > |V_{thp}| $).  \n  - Output $ V_{out} = V_{DD} $.  \n- When $ V_{in} = V_{DD} $:  \n  - M₁ is **ON** (nMOS turns on).  \n  - M₂ is **OFF** (pMOS turns off).  \n  - Output $ V_{out} = 0 $.  \n\nThus, the inverter **inverts the input logic level**.\n\n---\n\n---\n\n## **2. DC Transfer Characteristic**\nThe **voltage transfer curve (VTC)** of the CMOS inverter has **three distinct regions**:\n\n| **Region**               | **M₁ State** | **M₂ State** | **Output Behavior**                     |\n|--------------------------|--------------|--------------|-----------------------------------------|\n| **$ V_{in} \\leq V_{thn} $** | OFF          | ON (Triode/Sat) | $ V_{out} = V_{DD} $ (High)          |\n| **$ V_{thn} < V_{in} < V_{DD} - |V_{thp}| $** | Saturation   | Saturation   | **Transition Region** (Nonlinear)      |\n| **$ V_{in} \\geq V_{DD} - |V_{thp}| $** | ON (Sat/Triode) | OFF          | $ V_{out} = 0 $ (Low)                 |\n\n### **Switching Threshold ($ V_M $)**\nThe **midpoint** of the VTC (where $ V_{in} = V_{out} = V_M $) is the **switching threshold**. For **symmetric transistors** (i.e., $ k_n = k_p $, $ V_{thn} = |V_{thp}| $):\n$$\nV_M = \\frac{V_{DD}}{2}\n$$\nThis ensures **rail-to-rail output swing** (0 to $ V_{DD} $) and **symmetric noise margins**.\n\n---\n\n---\n\n## **3. Small-Signal Analysis (AC Behavior)**\nAt the **switching threshold** ($ V_{in} = V_M $), both transistors operate in **saturation**, and the circuit behaves as a **voltage amplifier**.\n\n### **Voltage Gain ($ A_v $)**\nThe small-signal gain is derived from the **transconductance** ($ g_m $) and **output resistance** ($ r_o $) of the transistors:\n$$\nA_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_{mn} + g_{mp}}{1/r_{on} + 1/r_{op}}\n$$\n- **$ g_{mn} $, $ g_{mp} $:** Transconductance of M₁ and M₂.  \n  $$\n  g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}\n  $$\n- **$ r_{on}, r_{op} $:** Output resistance due to **channel-length modulation** ($ \\lambda $):  \n  $$\n  r_o = \\frac{1}{\\lambda I_D}\n  $$\n\nFor **matched transistors** ($ g_{mn} = g_{mp} $, $ r_{on} = r_{op} $) and **high output resistance** (typical in long-channel MOSFETs), the gain simplifies to:\n$$\nA_v \\approx -\\frac{g_{mn} + g_{mp}}{\\lambda I_D (1/r_{on} + 1/r_{op})} \\approx -\\frac{2g_m}{\\lambda I_D} \\cdot \\frac{r_o}{2} = -\\frac{g_m}{\\lambda I_D}\n$$\nSince $ g_m = \\frac{2I_D}{V_{OV}} $ (where $ V_{OV} = V_{GS} - V_{th} $), the gain becomes:\n$$\nA_v \\approx -\\frac{2}{\\lambda V_{OV}}\n$$\n- **Typical values:**  \n  - $ \\lambda \\approx 0.1 \\, \\text{V}^{-1} $ (for long-channel devices).  \n  - $ V_{OV} \\approx 0.5 \\, \\text{V} $.  \n  - **Gain magnitude:** $ |A_v| \\approx 40 $ (high gain in transition region).\n\n### **Key Observations**\n- **High gain** in the transition region ensures **sharp switching** (ideal for digital logic).  \n- **Gain sign is negative**, confirming **inversion** of the input signal.  \n- **Gain magnitude decreases** with shorter channel lengths (due to higher $ \\lambda $) or lower overdrive voltage.\n\n---\n\n---\n\n## **4. Noise Margins**\nNoise margins quantify the **immunity to noise** in digital circuits. For a CMOS inverter:\n\n| **Parameter**       | **Definition**                          | **Formula**                          | **Typical Value** |\n|----------------------|-----------------------------------------|--------------------------------------|-------------------|\n| **$ V_{OH} $**      | Output High Voltage                     | $ V_{DD} $                         | $ V_{DD} $      |\n| **$ V_{OL} $**      | Output Low Voltage                      | $ 0 $                              | $ 0 $           |\n| **$ V_{IH} $**      | Input High Threshold                    | Voltage where $ \\frac{dV_{out}}{dV_{in}} = -1 $ | $ \\approx 0.7V_{DD} $ |\n| **$ V_{IL} $**      | Input Low Threshold                     | Voltage where $ \\frac{dV_{out}}{dV_{in}} = -1 $ | $ \\approx 0.3V_{DD} $ |\n| **$ NM_H $**         | Noise Margin High                       | $ V_{OH} - V_{IH} $                | $ \\approx 0.3V_{DD} $ |\n| **$ NM_L $**         | Noise Margin Low                        | $ V_{IL} - V_{OL} $                | $ \\approx 0.3V_{DD} $ |\n\n- **Symmetric noise margins** (for matched transistors) ensure **robust logic levels**.\n\n---\n\n---\n\n## **5. Power Consumption**\n- **Static Power ($ P_{static} $):**  \n  - **Near zero** when $ V_{in} = 0 $ or $ V_{DD} $ (one transistor is OFF).  \n  - **Minimal leakage current** due to subthreshold conduction (typically **pA–nA**).\n- **Dynamic Power ($ P_{dynamic} $):**  \n  - Dominated by **switching activity**:  \n    $$\n    P_{dynamic} = C_L V_{DD}^2 f\n    $$\n    - $ C_L $: Load capacitance.  \n    - $ f $: Switching frequency.  \n  - **Scales with $ V_{DD}^2 $**, making low-power designs favor lower $ V_{DD} $.\n\n---\n\n---\n\n## **6. Frequency Response**\n- **Dominant Pole:**  \n  At the output node, the **RC time constant** determines the bandwidth:  \n  $$\n  f_{3dB} = \\frac{1}{2\\pi R_{eq} C_L}\n  $$\n  - $ R_{eq} = r_{on} \\parallel r_{op} $ (output resistance of the inverter).  \n  - $ C_L $: Load capacitance (including parasitic capacitances).  \n- **Higher $ f_{3dB} $** is achieved with **smaller $ C_L $** or **higher $ g_m $** (via larger $ W/L $).\n\n---\n\n---\n\n## **7. Key Takeaways**\n| **Aspect**               | **Behavior**                                                                 |\n|--------------------------|-----------------------------------------------------------------------------|\n| **Logic Function**       | Inverts input ($ V_{out} = \\overline{V_{in}} $).                          |\n| **DC Transfer**          | Rail-to-rail output swing (0 to $ V_{DD} $).                               |\n| **Switching Threshold**  | $ V_M = V_{DD}/2 $ (for symmetric transistors).                            |\n| **Small-Signal Gain**    | High magnitude ($ |A_v| \\approx 20–100 $) in transition region.        |\n| **Noise Margins**        | Symmetric ($ \\approx 0.3V_{DD} $) for robust digital operation.            |\n| **Power Efficiency**     | Near-zero static power; dynamic power scales with $ V_{DD}^2 f $.          |\n| **Speed**                | Limited by $ R_{eq} C_L $; improved with smaller $ C_L $ or higher $ g_m $. |\n\n---\n\n---\n\n## **8. Practical Considerations**\n- **Transistor Sizing:**  \n  To achieve **symmetric switching** and **high gain**, the **$ W/L $ ratios** of M₁ and M₂ are adjusted to balance $ g_{mn} $ and $ g_{mp} $.  \n  - For $ \\mu_n \\approx 2–3 \\times \\mu_p $, typically:  \n    $$\n    \\left( \\frac{W}{L} \\right)_p = 2–3 \\times \\left( \\frac{W}{L} \\right)_n\n    $$\n- **Threshold Voltage ($ V_{th} $):**  \n  Modern processes use **low $ V_{th} $** (e.g., 0.3–0.5 V) for high performance but at the cost of **higher leakage**.  \n- **Channel-Length Modulation ($ \\lambda $):**  \n  Shorter channels (e.g., 28 nm, 7 nm) have **higher $ \\lambda $**, reducing gain but increasing speed.  \n\n---\n\n---\n### **Final Answer**\nThe circuit is a **CMOS inverter**, which:\n1. **Inverts the input signal** ($ V_{out} = \\overline{V_{in}} $).\n2. **Operates with rail-to-rail output** (0 to $ V_{DD} $).\n3. **Has high small-signal gain** ($ |A_v| \\approx 20–100 $) in the transition region.\n4. **Consumes near-zero static power** but has dynamic power proportional to $ V_{DD}^2 f $.\n5. **Provides symmetric noise margins** for robust digital operation.\n\nThis configuration is **ubiquitous in digital logic** (e.g., in CPUs, memory, and microcontrollers) due to its **low power, high noise immunity, and scalability**. For analog applications, it serves as a **basic amplifier** or **buffer** in mixed-signal circuits.",
        "format": "markdown",
        "sha256": "e23a89d1e5ee4da736d5f2652ded08ec9286e458acd96cc1768bfb3d1d4a7557"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer mistakes the diode-connected PMOS load (whose gate is tied to its drain at Vout) for a CMOS inverter PMOS whose gate is tied to Vin. It therefore analyzes the wrong topology and gives an irrelevant gain and operating behavior.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 816,
        "output_tokens": 13637,
        "total_tokens": 14453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 816,
        "output_tokens": 13637,
        "total_tokens": 14453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11051,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS inverter**, a fundamental building block in digital integrated circuits. Below is a detailed analysis of its structure, operation, and key characteristics.\n\n---\n\n### **1. Circuit Identification**\n- **Transistors**:\n  - **M₁ (Bottom)**: NMOS transistor (source connected to ground).\n  - **M₂ (Top)**: PMOS transistor (source connected to $ V_{DD} $).\n- **Configuration**: The gates of both transistors are tied together as the input $ V_{in} $, and their drains are connected to the output $ V_{out} $.\n- **Type**: This is a **complementary MOS (CMOS) inverter**, where the NMOS and PMOS act as complementary switches.\n\n---\n\n### **2. Operating Principle**\nThe CMOS inverter works by **complementary switching**:\n- When $ V_{in} $ is **LOW (0V)**:\n  - **M₁ (NMOS)**: Gate-source voltage $ V_{GS} = 0 $ → **OFF** (no conduction).\n  - **M₂ (PMOS)**: Gate-source voltage $ V_{GS} = V_{in} - V_{DD} = -V_{DD} $ → **ON** (conducts if $ |V_{GS}| > |V_{th,p}| $).\n  - **Result**: $ V_{out} $ is pulled **UP to $ V_{DD} $** (logic **1**).\n\n- When $ V_{in} $ is **HIGH ($ V_{DD} $)**:\n  - **M₁ (NMOS)**: $ V_{GS} = V_{DD} $ → **ON** (conducts if $ V_{GS} > V_{th,n} $).\n  - **M₂ (PMOS)**: $ V_{GS} = 0 $ → **OFF** (no conduction).\n  - **Result**: $ V_{out} $ is pulled **DOWN to 0V** (logic **0**).\n\n- **Transition Region**: When $ V_{in} $ is between $ V_{th,n} $ and $ V_{DD} - |V_{th,p}| $, both transistors may conduct briefly, but in steady state, **only one transistor is ON at a time**, minimizing static power dissipation.\n\n---\n\n### **3. Key Characteristics**\n#### **(a) Logic Function**\n- **Inverts the input**: $ V_{out} = \\overline{V_{in}} $.\n- **Truth Table**:\n  | $ V_{in} $ | $ V_{out} $ |\n  |-------------|--------------|\n  | 0V          | $ V_{DD} $  |\n  | $ V_{DD} $ | 0V           |\n\n#### **(b) Voltage Transfer Characteristic (VTC)**\n- **Switching Threshold ($ V_{TH} $)**: The input voltage where $ V_{in} = V_{out} $. For symmetric CMOS (identical $ W/L $ ratios and threshold voltages), $ V_{TH} \\approx \\frac{V_{DD}}{2} $.\n- **Steep Transition**: High gain in the transition region ensures a sharp switch between logic levels.\n\n#### **(c) Power Consumption**\n- **Static Power**: **Near zero** in steady state (no DC current path from $ V_{DD} $ to ground).\n- **Dynamic Power**: Dominates during switching due to charging/discharging of load capacitance:  \n  $$\n  P_{dynamic} = \\alpha C_L V_{DD}^2 f_{clk}\n  $$  \n  where $ \\alpha $ = activity factor, $ C_L $ = load capacitance, $ f_{clk} $ = clock frequency.\n\n#### **(d) Noise Immunity**\n- **High**: Full rail-to-rail output swing ($ 0 \\rightarrow V_{DD} $) maximizes noise margins. The inverter rejects noise effectively due to its sharp transition.\n\n#### **(e) Input/Output Impedance**\n- **Input Impedance**: Very high (gate capacitance dominates, no DC current).\n- **Output Impedance**: Low in both logic states (strong drive strength when active).\n\n---\n\n### **4. Advantages of CMOS Inverter**\n1. **Low Static Power**: No power dissipation when idle (ideal for battery-powered devices).\n2. **High Scalability**: Works well with modern nanometer-scale technologies.\n3. **Rail-to-Rail Output**: Full logic swing ($ 0 \\rightarrow V_{DD} $) ensures compatibility with other CMOS gates.\n4. **High Speed**: Fast switching due to complementary action and low output impedance.\n\n---\n\n### **5. Limitations**\n- **Dynamic Power**: Increases with frequency and supply voltage (a concern in high-speed designs).\n- **Leakage Current**: Subthreshold and gate leakage currents become significant in advanced nodes (e.g., 22 nm and below).\n\n---\n\n### **Conclusion**\nThis circuit is a **classic CMOS inverter**, which:\n- **Inverts** the input signal.\n- Operates with **near-zero static power**.\n- Provides **full rail-to-rail output swing**.\n- Is the foundation for **all CMOS digital logic** (e.g., NAND, NOR gates are built by extending this structure).\n\nFor deeper analysis, you could simulate the **voltage transfer characteristic (VTC)** or calculate the **propagation delay** using transistor models (e.g., square-law or short-channel models). However, the core functionality and advantages are as described above.",
        "format": "markdown",
        "sha256": "ebad2f4c44593561fae625fd38a23817d06ff14192d1702c1349352b00e09593"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes the NMOS and PMOS types but misreads the PMOS gate connection, treating the diode-connected load as a CMOS inverter. The resulting logic and power analysis misses the intended common-source stage and its gain.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 816,
        "output_tokens": 2142,
        "total_tokens": 2958,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 816,
        "output_tokens": 2142,
        "total_tokens": 2958,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 987,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-source amplifier with a diode-connected PMOS active load**, a fundamental building block in analog CMOS design. Below is a structured analysis:\n\n---\n\n---\n\n### **🔹 Circuit Configuration & Operation**\n- **Transistors**:\n  - **M₁ (NMOS)**: Input transistor (common-source stage).  \n    - **Gate**: Driven by input voltage \\( V_{\\text{in}} \\).  \n    - **Source**: Connected to ground.  \n    - **Drain**: Connected to the output node \\( V_{\\text{out}} \\).  \n  - **M₂ (PMOS)**: Active load (diode-connected).  \n    - **Source**: Connected to \\( V_{DD} \\).  \n    - **Gate & Drain**: Short-circuited and connected to \\( V_{\\text{out}} \\).  \n    - Acts as a **current source** (due to diode connection, \\( V_{SG} = V_{SD} \\)).\n\n- **Key Insight**:  \n  The diode-connected M₂ replaces a passive resistor, providing a **high output resistance** (critical for high gain in analog circuits). This topology is widely used in **amplifiers, current mirrors, and biasing circuits**.\n\n---\n\n---\n\n### **🔹 DC Analysis (Biasing)**\n#### **Assumptions**:\n- Both transistors operate in **saturation** (valid for typical analog design).  \n- \\( V_{THn} \\): Threshold voltage of NMOS (M₁).  \n- \\( |V_{THp}| \\): Threshold voltage of PMOS (M₂, \\( V_{THp} < 0 \\)).  \n- \\( k_n = \\mu_n C_{ox} \\frac{W_1}{L_1} \\), \\( k_p = \\mu_p C_{ox} \\frac{W_2}{L_2} \\) (transconductance parameters).\n\n#### **Equations**:\n1. **M₁ (NMOS) in Saturation**:  \n   \\[\n   I_{D1} = \\frac{1}{2} k_n (V_{\\text{in}} - V_{THn})^2 \\quad \\text{(if } V_{\\text{out}} \\geq V_{\\text{in}} - V_{THn} \\text{)}\n   \\]\n2. **M₂ (PMOS) in Saturation (Diode-Connected)**:  \n   \\[\n   I_{D2} = \\frac{1}{2} k_p (V_{DD} - V_{\\text{out}} - |V_{THp}|)^2 \\quad \\text{(if } V_{DD} - V_{\\text{out}} \\geq |V_{THp}| \\text{)}\n   \\]\n3. **KCL at Output Node**:  \n   \\( I_{D1} = I_{D2} \\) (series connection), so:  \n   \\[\n   k_n (V_{\\text{in}} - V_{THn})^2 = k_p (V_{DD} - V_{\\text{out}} - |V_{THp}|)^2\n   \\]\n   Solve for \\( V_{\\text{out}} \\):  \n   \\[\n   V_{\\text{out}} = V_{DD} - |V_{THp}| - \\sqrt{\\frac{k_n}{k_p}} (V_{\\text{in}} - V_{THn})\n   \\]\n\n#### **Biasing Considerations**:\n- **Input Range**:  \n  To keep M₁ in saturation: \\( V_{\\text{in}} > V_{THn} \\) and \\( V_{\\text{out}} \\geq V_{\\text{in}} - V_{THn} \\).  \n  To keep M₂ in saturation: \\( V_{DD} - V_{\\text{out}} \\geq |V_{THp}| \\).  \n- **DC Operating Point**:  \n  Typically, \\( V_{\\text{in}} \\) is set such that \\( V_{\\text{out}} \\) is mid-supply (e.g., \\( V_{DD}/2 \\)) for maximum swing.  \n  Example: If \\( k_n = k_p \\) and \\( V_{THn} = |V_{THp}| \\), then \\( V_{\\text{out}} = V_{DD} - V_{\\text{in}} \\).\n\n---\n\n---\n\n### **🔹 Small-Signal Analysis (AC Behavior)**\n#### **Small-Signal Model**:\n- **M₁ (NMOS)**:  \n  - Transconductance: \\( g_{m1} = \\sqrt{2 k_n I_D} \\).  \n  - Output resistance: \\( r_{o1} = \\frac{1}{\\lambda_n I_D} \\) (where \\( \\lambda_n \\) is channel-length modulation parameter).  \n- **M₂ (PMOS, Diode-Connected)**:  \n  - Small-signal resistance: \\( r_{d2} = \\frac{1}{g_{m2}} \\parallel r_{o2} \\approx \\frac{1}{g_{m2}} \\) (since \\( g_{m2} r_{o2} \\gg 1 \\)).  \n  - Transconductance: \\( g_{m2} = \\sqrt{2 k_p I_D} \\).\n\n#### **Voltage Gain (\\( A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} \\))**:\n- The output node sees a parallel combination of \\( r_{o1} \\) and \\( r_{d2} \\).  \n- **Gain Expression**:  \n  \\[\n  A_v = -g_{m1} \\cdot (r_{o1} \\parallel r_{d2}) \\approx -g_{m1} \\cdot \\left( \\frac{1}{g_{m2}} \\right) = -\\frac{g_{m1}}{g_{m2}}\n  \\]\n  Substituting \\( g_{m1} = \\sqrt{2 k_n I_D} \\) and \\( g_{m2} = \\sqrt{2 k_p I_D} \\):  \n  \\[\n  A_v = -\\sqrt{\\frac{k_n}{k_p}} = -\\sqrt{\\frac{\\mu_n (W_1/L_1)}{\\mu_p (W_2/L_2)}}\n  \\]\n  - **Typical Values**: \\( \\mu_n \\approx 2-3 \\mu_p \\). If \\( (W_1/L_1) = (W_2/L_2) \\), \\( A_v \\approx -1.5 \\) to \\( -2 \\).  \n  - **Improving Gain**: Increase \\( (W_1/L_1) \\) or reduce \\( (W_2/L_2) \\) to maximize \\( \\sqrt{k_n/k_p} \\).\n\n#### **Input/Output Impedances**:\n- **Input Resistance (\\( R_{\\text{in}} \\))**:  \n  \\( \\to \\infty \\) (MOSFET gate is insulated; no DC current).  \n- **Output Resistance (\\( R_{\\text{out}} \\))**:  \n  \\( R_{\\text{out}} = r_{o1} \\parallel r_{d2} \\approx \\frac{1}{g_{m2}} \\) (if \\( r_{o1} \\gg 1/g_{m2} \\)).\n\n---\n\n---\n\n### **🔹 Key Characteristics & Limitations**\n| **Property**               | **Value/Behavior**                                                                 |\n|----------------------------|-----------------------------------------------------------------------------------|\n| **Voltage Gain**           | \\( A_v \\approx -\\sqrt{\\frac{\\mu_n (W_1/L_1)}{\\mu_p (W_2/L_2)}} \\) (typically **–1.5 to –5**). |\n| **Input Range**            | \\( V_{THn} < V_{\\text{in}} < V_{DD} - |V_{THp}| + V_{\\text{out,min}} \\) (to keep both transistors in saturation). |\n| **Output Swing**           | Limited by \\( V_{DD} \\) and threshold voltages (e.g., \\( V_{\\text{out}} \\in [V_{THn}, V_{DD} - |V_{THp}|] \\)). |\n| **Power Efficiency**       | High (no static power dissipation except for leakage).                              |\n| **Frequency Response**     | Bandwidth limited by parasitic capacitances (e.g., \\( C_{GD} \\), \\( C_{DB} \\)).      |\n| **Noise**                  | Dominated by thermal noise from M₁ and flicker noise (1/f noise).                 |\n\n---\n\n---\n\n### **🔹 Practical Applications**\n1. **Amplifiers**:  \n   Used as a **single-stage gain block** in analog front-ends (e.g., sensors, RF receivers).  \n2. **Current Mirrors**:  \n   If \\( V_{\\text{in}} \\) is fixed (e.g., from a bias generator), M₁ and M₂ form a **current mirror** to replicate \\( I_D \\).  \n3. **Biasing Circuits**:  \n   Diode-connected M₂ can set a reference current for other stages.  \n4. **Inverters (Special Case)**:  \n   If \\( V_{\\text{in}} \\) drives both M₁ and M₂ gates (not the case here), it becomes a **CMOS inverter**.\n\n---\n\n---\n\n### **🔹 Summary**\n- **Circuit Type**: Common-source amplifier with **diode-connected PMOS active load**.  \n- **DC Behavior**: Output voltage \\( V_{\\text{out}} \\) is a function of \\( V_{\\text{in}} \\), \\( V_{DD} \\), and transistor parameters.  \n- **AC Gain**: **Negative** and proportional to the ratio of transconductances (\\( A_v \\approx -g_{m1}/g_{m2} \\)).  \n- **Advantages**: High gain, high input impedance, no static power dissipation (ideal for low-power analog ICs).  \n- **Limitations**: Limited output swing, sensitive to process variations (e.g., \\( \\mu_n/\\mu_p \\)), and finite bandwidth.\n\n> **💡 Design Tip**: To maximize gain, use **larger \\( (W/L)_1 \\)** for M₁ and **smaller \\( (W/L)_2 \\)** for M₂ (since \\( \\mu_n > \\mu_p \\)). For example, if \\( \\mu_n = 2\\mu_p \\), set \\( (W_1/L_1) = 4(W_2/L_2) \\) to achieve \\( A_v = -2 \\).",
        "format": "markdown",
        "sha256": "362024c10b401d265f993a0d7759140dddaedc58774af529465e31dd8172b238"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including both output resistances before approximating to \\(-g_{m1}/g_{m2}\\), satisfying the explicit full-credit rule.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 816,
        "output_tokens": 5331,
        "total_tokens": 6147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 816,
        "output_tokens": 5331,
        "total_tokens": 6147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3025,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS inverter**, a fundamental digital logic circuit in complementary metal-oxide-semiconductor (CMOS) technology. Here’s a detailed analysis:\n\n---\n\n### **1. Circuit Configuration**\n- **Transistors**:  \n  - **$ M_2 $**: PMOS transistor (source connected to $ V_{DD} $, drain connected to the output node $ V_{out} $).  \n  - **$ M_1 $**: NMOS transistor (source connected to ground, drain connected to $ V_{out} $).  \n- **Input**: $ V_{in} $ drives the gates of both $ M_1 $ and $ M_2 $.  \n- **Output**: $ V_{out} $ is the common drain node of $ M_1 $ and $ M_2 $.  \n\nThis is the **classic CMOS inverter topology**, where the PMOS and NMOS are connected in series between $ V_{DD} $ and ground, with their gates tied together.\n\n---\n\n### **2. Operating Principle**\nThe CMOS inverter exploits the **complementary behavior** of NMOS and PMOS transistors:\n\n| **Input $ V_{in} $** | **$ M_2 $ (PMOS)** | **$ M_1 $ (NMOS)** | **Output $ V_{out} $** | **Logic Function** |\n|------------------------|----------------------|----------------------|--------------------------|--------------------|\n| Low (0 V)             | **ON**               | **OFF**              | High ($ V_{DD} $)        | $ V_{out} = \\overline{V_{in}} $ |\n| High ($ V_{DD} $)    | **OFF**              | **ON**               | Low (0 V)                |                    |\n\n- **When $ V_{in} = 0 \\, \\text{V} $**:  \n  - The PMOS $ M_2 $ turns **ON** (gate-source voltage $ V_{GS} = 0 - V_{DD} = -V_{DD} < V_{TH,p} $, where $ V_{TH,p} $ is the PMOS threshold voltage).  \n  - The NMOS $ M_1 $ turns **OFF** (gate-source voltage $ V_{GS} = 0 - 0 = 0 < V_{TH,n} $, where $ V_{TH,n} $ is the NMOS threshold voltage).  \n  - $ V_{out} $ is pulled **up to $ V_{DD} $** through $ M_2 $.  \n\n- **When $ V_{in} = V_{DD} $**:  \n  - The PMOS $ M_2 $ turns **OFF** (gate-source voltage $ V_{GS} = V_{DD} - V_{DD} = 0 > V_{TH,p} $).  \n  - The NMOS $ M_1 $ turns **ON** (gate-source voltage $ V_{GS} = V_{DD} - 0 = V_{DD} > V_{TH,n} $).  \n  - $ V_{out} $ is pulled **down to 0 V** through $ M_1 $.  \n\n---\n\n### **3. Key Characteristics**\n- **Inversion**: The circuit implements a **NOT gate** ($ V_{out} = \\overline{V_{in}} $).  \n- **Static Power Consumption**:  \n  - In steady-state (stable $ V_{in} $), **one transistor is always OFF**, so there is **no direct DC current path** from $ V_{DD} $ to ground. Thus, **static power dissipation is nearly zero**.  \n  - Dynamic power consumption occurs only during switching transitions (due to capacitive charging/discharging).  \n- **Noise Margins**:  \n  - CMOS inverters have **high noise immunity** due to the sharp transition region in their voltage transfer characteristic (VTC). The input voltage range where the output is ambiguous (mid-supply) is very narrow.  \n- **Full-Swing Output**:  \n  - The output swings from **0 V to $ V_{DD} $**, providing maximum signal integrity for cascaded logic gates.  \n\n---\n\n### **4. Voltage Transfer Characteristic (VTC)**\nThe VTC of a CMOS inverter has five distinct regions:  \n1. **Cutoff (PMOS ON, NMOS OFF)**: $ V_{in} < V_{TH,n} $ → $ V_{out} = V_{DD} $.  \n2. **Linear (Both ON)**: $ V_{TH,n} < V_{in} < V_{DD} - |V_{TH,p}| $ → Both transistors conduct, and $ V_{out} $ transitions.  \n3. **Saturation (Both ON)**: $ V_{DD} - |V_{TH,p}| < V_{in} < V_{DD} $ → $ V_{out} $ drops rapidly.  \n4. **Cutoff (NMOS ON, PMOS OFF)**: $ V_{in} > V_{DD} - |V_{TH,p}| $ → $ V_{out} = 0 \\, \\text{V} $.  \n\nThe **switching threshold** (where $ V_{in} = V_{out} $) is typically near $ V_{DD}/2 $ for symmetric transistor sizing.\n\n---\n\n### **5. Summary**\n- **Function**: Digital inverter ($ V_{out} = \\overline{V_{in}} $).  \n- **Advantages**:  \n  - Near-zero static power.  \n  - High noise margins.  \n  - Full rail-to-rail output swing.  \n  - Scalable with technology (works well in nanometer-scale CMOS).  \n- **Applications**:  \n  - Core building block for all CMOS digital circuits (e.g., logic gates, flip-flops, microprocessors).  \n\nThis circuit is the foundation of modern digital electronics due to its efficiency, reliability, and scalability.",
        "format": "markdown",
        "sha256": "c22f310ac033970902b877e3efe578d6958b8556bcd22387e74573b3f3827243"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter with an NMOS pull-down. Both devices are PMOS; M1 is a diode-connected load, and the key result is the gm/gm gain, which the answer misses entirely.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1886,
        "output_tokens": 1639,
        "total_tokens": 3525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1886,
        "output_tokens": 1639,
        "total_tokens": 3525,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS inverter**, a fundamental building block in digital integrated circuits. Here’s a detailed analysis:\n\n---\n\n### **1. Circuit Configuration**\n- **Transistors**:\n  - **M₂**: *p-channel MOSFET (PMOS)*  \n    - **Source** connected to \\( V_{DD} \\) (positive supply voltage).  \n    - **Gate** connected to \\( V_{in} \\) (input).  \n    - **Drain** connected to \\( V_{out} \\) (output).  \n  - **M₁**: *n-channel MOSFET (NMOS)*  \n    - **Source** connected to ground.  \n    - **Gate** connected to \\( V_{in} \\).  \n    - **Drain** connected to \\( V_{out} \\).  \n\n- **Operation Principle**:  \n  The PMOS (M₂) and NMOS (M₁) form a **complementary pair**, meaning one transistor is ON while the other is OFF (and vice versa) for any input voltage \\( V_{in} \\).\n\n---\n\n### **2. Logic Function**\nThe circuit inverts the input signal:\n- **When \\( V_{in} = 0 \\) (LOGIC 0)**:\n  - **M₂ (PMOS)**: Gate-source voltage \\( V_{GS} = V_{in} - V_{DD} = -V_{DD} \\) (negative, so PMOS is **ON**).  \n    → Pulls \\( V_{out} \\) **up to \\( V_{DD} \\)** (LOGIC 1).  \n  - **M₁ (NMOS)**: Gate-source voltage \\( V_{GS} = V_{in} - 0 = 0 \\) (below threshold, so NMOS is **OFF**).  \n    → No path to ground.  \n  - **Output**: \\( V_{out} = V_{DD} \\) (LOGIC 1).\n\n- **When \\( V_{in} = V_{DD} \\) (LOGIC 1)**:\n  - **M₂ (PMOS)**: \\( V_{GS} = V_{in} - V_{DD} = 0 \\) (above threshold for PMOS, so **OFF**).  \n    → No path to \\( V_{DD} \\).  \n  - **M₁ (NMOS)**: \\( V_{GS} = V_{in} - 0 = V_{DD} \\) (above threshold, so **ON**).  \n    → Pulls \\( V_{out} \\) **down to ground** (LOGIC 0).  \n  - **Output**: \\( V_{out} = 0 \\) (LOGIC 0).\n\n- **Result**:  \n  \\( V_{out} = \\overline{V_{in}} \\) (inversion of the input).\n\n---\n\n### **3. Key Characteristics**\n- **Voltage Transfer Characteristic (VTC)**:  \n  The output transitions sharply between \\( V_{DD} \\) and 0 as \\( V_{in} \\) crosses the switching threshold (typically near \\( V_{DD}/2 \\) for symmetric devices).  \n- **Noise Margins**:  \n  High noise immunity due to the full rail-to-rail swing (0 to \\( V_{DD} \\)).  \n- **Static Power Dissipation**:  \n  Near **zero** in steady state (one transistor is always OFF, so no DC current path from \\( V_{DD} \\) to ground).  \n- **Dynamic Behavior**:  \n  Speed depends on transistor sizes (W/L ratios), load capacitance, and supply voltage.  \n\n---\n\n### **4. Applications**\n- **Digital Logic**: Core component of CMOS logic gates (e.g., NAND, NOR, flip-flops).  \n- **Signal Processing**: Used in oscillators, buffers, and analog switches (when biased in the linear region).  \n- **Low-Power Design**: Ideal for battery-powered systems due to negligible static power consumption.\n\n---\n\n### **5. Summary**\nThis is a **CMOS inverter** that:\n- Inverts the input signal (\\( V_{out} = \\overline{V_{in}} \\)).  \n- Operates with minimal static power dissipation.  \n- Provides full logic swing (0 to \\( V_{DD} \\)) and high noise margins.  \n\nIt is the simplest and most widely used digital logic gate in modern integrated circuits.",
        "format": "markdown",
        "sha256": "480b4aa302d46ede926c5c250cd715aeccc7789a356751d423991f3d100b4243"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a CMOS inverter with an NMOS M1. Both devices are PMOS; M1 is a diode-connected PMOS load, giving a common-source gm/gm amplifier rather than an inverter.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1886,
        "output_tokens": 1264,
        "total_tokens": 3150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 316,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1886,
        "output_tokens": 1264,
        "total_tokens": 3150,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 316,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **CMOS inverter**, a fundamental digital logic gate in complementary metal–oxide–semiconductor (CMOS) technology. Here’s a detailed analysis:\n\n---\n\n### **1. Circuit Topology**\n- **M₂**: PMOS transistor  \n  - *Source*: Connected to \\( V_{DD} \\) (positive supply voltage).  \n  - *Drain*: Connected to the output node \\( V_{\\text{out}} \\).  \n  - *Gate*: Driven by the input \\( V_{\\text{in}} \\).  \n- **M₁**: NMOS transistor  \n  - *Source*: Connected to ground (0 V).  \n  - *Drain*: Connected to the output node \\( V_{\\text{out}} \\).  \n  - *Gate*: Driven by the input \\( V_{\\text{in}} \\).  \n\nThis configuration is the **classic CMOS inverter structure**, where the PMOS and NMOS are connected in series between \\( V_{DD} \\) and ground, with their gates tied to the same input.\n\n---\n\n### **2. Operating Principle**\nThe CMOS inverter exploits the **complementary behavior** of PMOS and NMOS transistors:\n\n| **Input \\( V_{\\text{in}} \\)** | **M₂ (PMOS) State** | **M₁ (NMOS) State** | **Output \\( V_{\\text{out}} \\)** | **Explanation** |\n|-------------------------------|---------------------|---------------------|-------------------------------|----------------|\n| **High (≈ \\( V_{DD} \\))**     | **OFF**             | **ON**              | **0 V (Low)**                 | \\( V_{\\text{in}} \\) turns off PMOS (no path to \\( V_{DD} \\)), turns on NMOS (path to ground). Output is pulled to 0 V. |\n| **Low (≈ 0 V)**               | **ON**              | **OFF**             | **\\( V_{DD} \\) (High)**       | \\( V_{\\text{in}} \\) turns on PMOS (path to \\( V_{DD} \\)), turns off NMOS (no path to ground). Output is pulled to \\( V_{DD} \\). |\n\n- **Inversion**: The output is the **logical inverse** of the input:  \n  \\( V_{\\text{out}} = \\overline{V_{\\text{in}}} \\).\n\n---\n\n### **3. Key Characteristics**\n- **Full Rail-to-Rail Swing**:  \n  Output swings from **0 V to \\( V_{DD} \\)**, maximizing noise immunity.\n- **Low Static Power Consumption**:  \n  In steady state (either input high or low), **no DC current path** exists between \\( V_{DD} \\) and ground (one transistor is always OFF). Power is only consumed during switching (dynamic power).\n- **High Noise Immunity**:  \n  The sharp transition region (due to complementary operation) ensures robust performance against noise.\n- **Symmetry**:  \n  The PMOS and NMOS are designed with matched dimensions (typically \\( W_p / W_n \\approx 2-3 \\) to compensate for lower PMOS mobility) to achieve symmetric switching thresholds.\n\n---\n\n### **4. Transfer Characteristic**\nThe voltage transfer characteristic (VTC) of the CMOS inverter shows:\n- **Switching Threshold (\\( V_M \\))**:  \n  The input voltage at which \\( V_{\\text{out}} = V_{\\text{in}} \\). For a symmetric inverter, \\( V_M \\approx V_{DD}/2 \\).\n- **Noise Margins**:  \n  - **High-Level Noise Margin (NM_H)**: Voltage range where input can be \"high\" without causing output to drop below the logic high threshold.  \n  - **Low-Level Noise Margin (NM_L)**: Voltage range where input can be \"low\" without causing output to rise above the logic low threshold.  \n  CMOS inverters typically have **large noise margins** (≈ 40–50% of \\( V_{DD} \\)).\n\n---\n\n### **5. Applications**\n- **Digital Logic Gates**: The foundation of all CMOS logic (e.g., NAND, NOR gates are built by combining multiple inverters).\n- **Oscillators & Clocks**: Used in ring oscillators and clock buffers.\n- **Signal Restoration**: In digital circuits, inverters are used to regenerate signals degraded by noise or transmission losses.\n\n---\n\n### **Summary**\nThis circuit is a **CMOS inverter** that:\n- Inverts the input signal (\\( V_{\\text{out}} = \\overline{V_{\\text{in}}} \\)).\n- Operates with **low static power**, **full output swing**, and **high noise immunity**.\n- Is the building block for all CMOS digital logic.  \n\nIf you need further analysis (e.g., transient response, power dissipation, or sizing considerations), let me know!",
        "format": "markdown",
        "sha256": "3459cc31c7e7949470bc69f7a36db4b82675ea0881985b6b801dc8a1b2a6a324"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a CMOS inverter and M1 as an NMOS. Both devices are PMOS; M1 is a diode-connected PMOS load, so the answer misses the essential topology and gm/gm gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1886,
        "output_tokens": 1449,
        "total_tokens": 3335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1886,
        "output_tokens": 1449,
        "total_tokens": 3335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the **output resistance $ R_{\\text{out}} $** in the given circuit, we analyze the small-signal behavior of the two PMOS transistors $ M_1 $ and $ M_2 $, which form a **cascode configuration**.\n\n---\n\n### 🔍 **Circuit Configuration**\n- $ M_2 $: A **common-source** PMOS transistor with:\n  - Source connected to $ V_{DD} $\n  - Gate biased at $ V_{b2} $\n  - Drain connected to node $ X $\n\n- $ M_1 $: A **common-gate** PMOS transistor with:\n  - Source connected to node $ X $\n  - Gate biased at $ V_{b1} $\n  - Drain connected to the output (through $ R_{\\text{out}} $)\n\nThis is a **cascode amplifier**, where:\n- $ M_2 $ acts as the **top (cascode) transistor**\n- $ M_1 $ acts as the **bottom (input) transistor**\n\n---\n\n### 🧠 **Small-Signal Analysis**\n\nIn small-signal analysis:\n- All DC voltage sources ($ V_{DD}, V_{b1}, V_{b2} $) are **shorted to ground**.\n- The **output resistance** is defined as the resistance seen looking into the **drain of $ M_1 $** (i.e., the output node).\n\nFor a **cascode amplifier**, the **output resistance** is dominated by the **product of the transconductance of the bottom transistor and the output resistances of both transistors**. This is because:\n\n- The **source of $ M_1 $** is connected to node $ X $, which is the **drain of $ M_2 $**.\n- Node $ X $ has a finite resistance due to $ M_2 $, which is approximately $ r_{o2} $ (the output resistance of $ M_2 $).\n- This **source resistance** $ r_{o2} $ for $ M_1 $ significantly increases its effective output resistance.\n\nThe **exact expression** for the output resistance of a cascode stage is:\n\n$$\nR_{\\text{out}} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2}\n$$\n\nHowever, in most practical cases, the **intrinsic gain** $ g_m r_o $ is much greater than 1 (typically on the order of 10–100), so the **dominant term** is:\n\n$$\nR_{\\text{out}} \\approx g_{m1} r_{o1} r_{o2}\n$$\n\nThis approximation is valid when $ g_{m1} r_{o1} \\gg 1 $, which is generally true in well-designed analog circuits.\n\n---\n\n### ✅ **Final Answer**\n\n$$\n\\boxed{R_{\\text{out}} = g_{m1} r_{o1} r_{o2}}\n$$\n\nThis is the **dominant component** of the output resistance in the cascode configuration, where:\n- $ g_{m1} $ is the **transconductance** of transistor $ M_1 $\n- $ r_{o1} $ and $ r_{o2} $ are the **output resistances** of transistors $ M_1 $ and $ M_2 $, respectively.\n\nThis result reflects the **high output impedance** characteristic of a cascode amplifier, making it suitable for high-gain applications.",
        "format": "markdown",
        "sha256": "6afb9f375b0c686cc4cca40d11b6e7534cd5c15686b56d938a29288f4135da87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer identifies both devices as PMOS and gives the correct expression and approximation using gm1. However, it contradicts itself by later calling M2 the cascode and M1 the input transistor, so the device-role explanation is not fully consistent.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2373,
        "output_tokens": 33186,
        "total_tokens": 35559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2373,
        "output_tokens": 33186,
        "total_tokens": 35559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 32453,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the output resistance \\( R_{\\text{out}} \\) at node \\( X \\) in the given circuit, we analyze the small-signal behavior of the two PMOS transistors \\( M_1 \\) and \\( M_2 \\), which are connected in parallel between \\( V_{DD} \\) (AC ground) and node \\( X \\).\n\n---\n\n### **Key Observations:**\n- Both \\( M_1 \\) and \\( M_2 \\) are **PMOS transistors** with their **sources connected to \\( V_{DD} \\)**.\n- Their **drains are tied together at node \\( X \\)**.\n- The **gates** are biased at fixed voltages \\( V_{b1} \\) and \\( V_{b2} \\), meaning no small-signal voltage is applied at the gates (i.e., \\( v_{gs} = 0 \\) for both).\n- In small-signal analysis, \\( V_{DD} \\) is treated as an **AC ground**, so the sources of both transistors are effectively grounded in the small-signal model.\n\n---\n\n### **Small-Signal Model:**\nEach transistor in saturation has an **output resistance** \\( r_o \\), which is given by:\n\n$$\nr_o = \\frac{1}{\\lambda I_D}\n$$\n\nwhere:\n- \\( \\lambda \\) is the channel-length modulation parameter,\n- \\( I_D \\) is the DC drain current.\n\nSince both transistors are connected in **parallel** between node \\( X \\) and AC ground (via \\( V_{DD} \\)), their output resistances combine in **parallel**.\n\n---\n\n### **Final Calculation:**\nThe total output resistance \\( R_{\\text{out}} \\) seen at node \\( X \\) is the **parallel combination** of the individual output resistances of \\( M_1 \\) and \\( M_2 \\):\n\n$$\nR_{\\text{out}} = r_{o1} \\parallel r_{o2} = \\frac{r_{o1} \\cdot r_{o2}}{r_{o1} + r_{o2}}\n$$\n\nIf the transistors are **identical** and biased similarly, then \\( r_{o1} = r_{o2} = r_o \\), and:\n\n$$\nR_{\\text{out}} = \\frac{r_o}{2}\n$$\n\nHowever, since the problem does not specify whether the transistors are identical or not, the general expression remains:\n\n$$\n\\boxed{R_{\\text{out}} = r_{o1} \\parallel r_{o2}}\n$$\n\n---\n\n### **Conclusion:**\nThe output resistance at node \\( X \\) is the **parallel combination of the output resistances of the two PMOS transistors**, \\( M_1 \\) and \\( M_2 \\). This is the standard result for two transistors connected in parallel at the output node.\n\n$$\n\\boxed{R_{\\text{out}} = r_{o1} \\parallel r_{o2}}\n$$",
        "format": "markdown",
        "sha256": "688975a8074568964bd9c4556d383b13b54670614992a2b17b2f75358969a4e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology: M1 and M2 are not parallel devices from VDD to X, and Rout is measured at M1’s drain, not at X. It therefore misses the cascode action and gives an unrelated parallel-resistance result.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2373,
        "output_tokens": 2308,
        "total_tokens": 4681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2373,
        "output_tokens": 2308,
        "total_tokens": 4681,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1697,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the output resistance $ R_{\\text{out}} $ of the circuit shown in the figure, we analyze the small-signal behavior of the transistor configuration. The circuit consists of two PMOS transistors, $ M_1 $ and $ M_2 $, connected in a **cascode** arrangement:\n\n- $ M_2 $: Source connected to $ V_{DD} $, gate biased at $ V_{b2} $, drain connected to node $ X $.\n- $ M_1 $: Source connected to node $ X $, gate biased at $ V_{b1} $, drain connected to the output node (where $ R_{\\text{out}} $ is labeled).\n\n---\n\n### Key Observations\n\n- Both transistors are assumed to be operating in **saturation**, which is typical for such configurations.\n- The **output node** is the drain of $ M_1 $, where $ R_{\\text{out}} $ is connected to ground.\n- However, the question asks to **find $ R_{\\text{out}} $ in the figure**, and the diagram explicitly labels a resistor as $ R_{\\text{out}} $.\n- This implies that the **resistor itself is part of the circuit**, and the problem is asking for its value.\n\n---\n\n### Interpretation of the Question\n\nThe phrase **\"Find $ R_{\\text{out}} $ in the figure\"** suggests that the answer is simply the **value of the resistor labeled $ R_{\\text{out}} $** in the circuit diagram. Since no numerical values or additional context are provided, and the resistor is clearly marked in the figure, the most direct interpretation is that the question is asking for the **labeled component**.\n\nThis is consistent with standard circuit analysis problems where a specific component is identified by name or label, and the task is to identify it.\n\n---\n\n### Final Answer\n\n$$\n\\boxed{R_{\\text{out}}}\n$$",
        "format": "markdown",
        "sha256": "67d4bd09f38577cb93ef19fa6fead4b66bcf1a6003a867e0949291b7b8ca500b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the PMOS devices and their connections, but misreads the task as asking for a labeled resistor’s value and gives no output-resistance expression or useful calculation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2373,
        "output_tokens": 10801,
        "total_tokens": 13174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2373,
        "output_tokens": 10801,
        "total_tokens": 13174,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that **M₂ is in saturation** in the given circuit, we must satisfy the **saturation condition for a MOSFET**, which depends on its type (PMOS or NMOS). Based on the circuit configuration:\n\n- **M₂ is a PMOS transistor**:  \n  - Its **source is connected to $ V_{DD} $** (the positive supply), and its **drain is at node $ X $**.  \n  - For a **PMOS** to be in saturation, the **source-to-drain voltage** ($ V_{SD} = V_{DD} - V_X $) must be **greater than or equal to the overdrive voltage** $ |V_{GS}| - |V_{thp}| $, where:  \n    - $ |V_{GS}| = V_{DD} - V_{b2} $ (since $ V_{GS} = V_{b2} - V_{DD} < 0 $ for PMOS),  \n    - $ |V_{thp}| $ is the magnitude of the PMOS threshold voltage (a positive value).  \n\n---\n\n### **Saturation Condition for M₂ (PMOS)**:\n$$\nV_{SD} \\geq |V_{GS}| - |V_{thp}|\n$$\nSubstituting:\n$$\nV_{DD} - V_X \\geq (V_{DD} - V_{b2}) - |V_{thp}|\n$$\nSimplify:\n$$\nV_X \\leq V_{b2} + |V_{thp}|\n$$\n\n---\n\n### **How to Ensure Saturation**:\nTo **guarantee M₂ remains in saturation**, the following must hold:\n1. **Turn on M₂**:  \n   $ V_{b2} < V_{DD} - |V_{thp}| $ (so $ |V_{GS}| > |V_{thp}| $, ensuring the transistor is in the active region).\n2. **Ensure $ V_X \\leq V_{b2} + |V_{thp}| $**:  \n   The voltage at node $ X $ (drain of M₂) must be **low enough** so that $ V_{SD} \\geq |V_{GS}| - |V_{thp}| $.  \n\nThis means:\n- **Set $ V_{b2} $ sufficiently low** such that even the **maximum possible $ V_X $** (determined by M₁ and $ R_{out} $) satisfies $ V_X \\leq V_{b2} + |V_{thp}| $.\n- In practice, this is achieved by **biasing $ V_{b2} $** so that the overdrive voltage $ |V_{GS}| - |V_{thp}| $ is positive and $ V_X $ does not rise above $ V_{b2} + |V_{thp}| $.\n\n---\n\n### ✅ **Final Answer**:\nTo ensure **M₂ is in saturation**, we must **set the gate voltage $ V_{b2} $** such that:\n$$\nV_X \\leq V_{b2} + |V_{thp}|\n$$\nThis guarantees that the **source-to-drain voltage $ V_{SD} $** of M₂ meets or exceeds its overdrive voltage. In practice, this is achieved by **biasing $ V_{b2} $ low enough** (relative to $ V_{DD} $) to maintain the required $ V_{SD} \\geq |V_{GS}| - |V_{thp}| $.\n\n**Key takeaway**:  \n- For a **PMOS** (like M₂), **$ V_X \\leq V_{b2} + |V_{thp}| $** ensures saturation.  \n- This is controlled by **properly setting $ V_{b2} $** based on the expected range of $ V_X $ in the circuit.",
        "format": "markdown",
        "sha256": "8f2df76ff6ba29096984664e8b683409ea6c99b256c692f176bd78cb0b6c575c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2 as PMOS and gives its saturation condition, but treats Vb2 as the control and misses that VX is set mainly by Vb1; the required condition relating Vb1 to M2's saturation is absent.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2381,
        "output_tokens": 5303,
        "total_tokens": 7684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2381,
        "output_tokens": 5303,
        "total_tokens": 7684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure **M₂ is in saturation** in the given circuit, we must satisfy the **saturation conditions for a MOSFET**, which depend on its type (NMOS or PMOS). Based on the circuit topology (M₂ connected to $ V_{DD} $), **M₂ is likely a PMOS transistor**. Here’s how to ensure it operates in saturation:\n\n---\n\n### **Key Saturation Conditions for PMOS (M₂)**\nFor a **PMOS transistor**:\n1. **Turn-on condition**:  \n   $ V_{SG} > |V_{thp}| $, where $ V_{SG} = V_{DD} - V_{b2} $.  \n   → This requires:  \n   $$\n   V_{b2} < V_{DD} - |V_{thp}|\n   $$\n\n2. **Saturation condition**:  \n   $ V_{SD} \\geq V_{SG} - |V_{thp}| $, where $ V_{SD} = V_{DD} - V_X $.  \n   → Substituting $ V_{SG} = V_{DD} - V_{b2} $:  \n   $$\n   V_{DD} - V_X \\geq (V_{DD} - V_{b2}) - |V_{thp}|\n   $$  \n   Simplifying:  \n   $$\n   V_X \\leq V_{b2} + |V_{thp}|\n   $$\n\n---\n\n### **How to Ensure Saturation in Practice**\n1. **Bias $ V_{b2} $ appropriately**:  \n   Set $ V_{b2} $ such that $ V_{DD} - V_{b2} > |V_{thp}| $ (to turn on M₂).  \n   - Example: If $ V_{DD} = 5\\, \\text{V} $ and $ |V_{thp}| = 0.7\\, \\text{V} $, then $ V_{b2} < 4.3\\, \\text{V} $.\n\n2. **Ensure $ V_X $ is sufficiently low**:  \n   The voltage at node $ X $ (drain of M₂, drain of M₁) must satisfy $ V_X \\leq V_{b2} + |V_{thp}| $.  \n   - This is controlled by the **load conditions** (M₁ and $ R_{\\text{out}} $).  \n   - If M₁ is an NMOS in saturation, $ V_X $ is determined by $ V_{b1} $ and $ V_{thn} $.  \n     For M₁ (NMOS) in saturation: $ V_X \\geq V_{b1} - V_{thn} $.  \n     To satisfy both M₁ and M₂ saturation:  \n     $$\n     V_{b1} - V_{thn} \\leq V_X \\leq V_{b2} + |V_{thp}|\n     $$  \n     → Choose $ V_{b1} $ and $ V_{b2} $ such that this inequality holds.\n\n3. **Avoid triode region**:  \n   If $ V_X $ becomes too high (e.g., due to excessive current through $ R_{\\text{out}} $), $ V_{SD} $ for M₂ will drop below $ V_{SG} - |V_{thp}| $, pushing M₂ into the **triode region**.  \n   → Ensure $ R_{\\text{out}} $ and $ V_{b1} $ are set so that $ V_X $ remains low enough.\n\n---\n\n### **Summary**\nTo guarantee **M₂ is in saturation**:\n- **Bias $ V_{b2} $** such that $ V_{DD} - V_{b2} > |V_{thp}| $ (turn-on condition).  \n- **Ensure $ V_X \\leq V_{b2} + |V_{thp}| $** (saturation condition), which depends on the bias of M₁ ($ V_{b1} $) and the load ($ R_{\\text{out}} $).  \n- **Design the circuit** so that the voltage at node $ X $ does not rise above the threshold required for M₂’s saturation.\n\nThis is typically achieved in **current mirror circuits** (e.g., a PMOS-NMOS mirror) by setting $ V_{b1} $ and $ V_{b2} $ to maintain both transistors in saturation.",
        "format": "markdown",
        "sha256": "9c6655f0192da656c4e51159dd98352dc2e4ae1eafa1c7e561e2483becc28360"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the correct PMOS saturation condition in terms of VX and Vb2, but misses the key point that VX is set by Vb1 and thus fails to give the required condition on Vb1. It also incorrectly identifies M1 as NMOS.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2381,
        "output_tokens": 2405,
        "total_tokens": 4786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2381,
        "output_tokens": 2405,
        "total_tokens": 4786,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that **M2 (a PMOS transistor)** is in **saturation** in the given circuit, we must satisfy the **saturation condition for a PMOS transistor**. Here's the step-by-step reasoning:\n\n---\n\n### **Key Condition for PMOS Saturation**\nFor a **PMOS transistor** to be in **saturation**, the **source-to-drain voltage (V_SD)** must satisfy:\n$$\nV_{SD} \\geq |V_{GS}| - |V_{TH}|\n$$\nwhere:\n- $ V_{SD} = V_S - V_D = V_{DD} - V_X $ (since $ V_S = V_{DD} $ and $ V_D = V_X $),\n- $ V_{GS} = V_G - V_S = V_{b2} - V_{DD} $ (gate-to-source voltage),\n- $ |V_{GS}| = V_{DD} - V_{b2} $ (magnitude of gate-to-source voltage),\n- $ |V_{TH}| $ is the magnitude of the threshold voltage (a positive value for PMOS).\n\nSubstituting into the saturation condition:\n$$\nV_{DD} - V_X \\geq (V_{DD} - V_{b2}) - |V_{TH}|\n$$\nSimplifying:\n$$\nV_X \\leq V_{b2} + |V_{TH}|\n$$\n\n---\n\n### **How to Ensure Saturation**\nTo guarantee that **M2 is in saturation**, we must ensure:\n$$\n\\boxed{V_X \\leq V_{b2} + |V_{TH}|}\n$$\n\n#### **Practical Implementation**\n1. **Set $ V_{b2} $ appropriately**:\n   - Choose $ V_{b2} $ such that $ V_{b2} + |V_{TH}| \\geq V_X $.\n   - Since $ V_X $ is determined by the circuit (pulled down by **M1** and the current source), $ V_{b2} $ must be **high enough** to satisfy this inequality.\n   - For example, if $ V_X $ is expected to be around 2V and $ |V_{TH}| = 0.5V $, then $ V_{b2} \\geq 1.5V $.\n\n2. **Ensure M1 is active**:\n   - **M1** (also a PMOS) pulls $ V_X $ down via the current source. If **M1 is off**, $ V_X $ could rise to $ V_{DD} $, violating the saturation condition for M2.\n   - Thus, **M1 must be biased to conduct current** (i.e., $ V_{b1} $ must be set so that $ V_{SG1} > |V_{TH1}| $).\n\n3. **Verify overdrive voltage**:\n   - For M2 to be **on** (not in cutoff), $ |V_{GS}| > |V_{TH}| $, which implies:\n     $$\n     V_{DD} - V_{b2} > |V_{TH}| \\quad \\Rightarrow \\quad V_{b2} < V_{DD} - |V_{TH}|\n     $$\n   - This ensures M2 is **not in cutoff** while also being in saturation.\n\n---\n\n### **Summary**\nTo ensure **M2 is in saturation**:\n- **Set $ V_{b2} $ such that $ V_X \\leq V_{b2} + |V_{TH}| $**.\n- **Ensure M1 is active** (so $ V_X $ is pulled down by the current source).\n- **Check that $ V_{b2} < V_{DD} - |V_{TH}| $** to keep M2 **on** (not in cutoff).\n\nThis guarantees that the **drain voltage $ V_X $** is sufficiently low for M2 to operate in saturation.\n\n---\n\n### **Final Answer**\nTo ensure **M2 is in saturation**, **set the gate bias $ V_{b2} $ such that the drain voltage $ V_X \\leq V_{b2} + |V_{TH}| $**, where $ |V_{TH}| $ is the magnitude of M2’s threshold voltage. This is achieved by:\n1. Choosing $ V_{b2} $ high enough to satisfy $ V_X \\leq V_{b2} + |V_{TH}| $,\n2. Ensuring **M1 is active** (via $ V_{b1} $) to pull $ V_X $ down, and\n3. Confirming $ V_{b2} < V_{DD} - |V_{TH}| $ to keep M2 **on**.\n\n$$\n\\boxed{V_X \\leq V_{b2} + |V_{TH}|}\n$$",
        "format": "markdown",
        "sha256": "bcb79ae81759225ee2e20fe49f8a6701c8dbba00bb1bc771d07bc2e7b08834fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the correct PMOS saturation condition in terms of VX and Vb2, but misses the key point that VX is set mainly by Vb1 and therefore fails to give the required condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2381,
        "output_tokens": 11717,
        "total_tokens": 14098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2381,
        "output_tokens": 11717,
        "total_tokens": 14098,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10717,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **nonlinear voltage amplifier** with a **diode-connected transistor (M₂)** and a **current source (I₁)**. Here's a detailed analysis:\n\n---\n\n### **🔹 Circuit Configuration**\n- **Power Supply**: $ V_{DD} $ (positive supply).\n- **Current Source**: $ I_1 $ (ideal current source pulling current from $ V_{DD} $ to node $ V_{out} $).\n- **Transistors**:\n  - **M₁**: NMOS with:\n    - **Source** connected to **ground**.\n    - **Gate** connected to input $ V_{in} $.\n    - **Drain** connected to node **X** (which is the same as $ V_{out} $).\n  - **M₂**: NMOS with:\n    - **Source** connected to bias voltage $ V_{b1} $.\n    - **Gate** and **Drain** connected to node **X** (i.e., **diode-connected**).\n- **Output Node**: $ V_{out} = X $ (common drain node of M₁ and M₂).\n\n---\n\n---\n\n### **🔹 DC Analysis (Operating Point)**\n#### **Assumptions**\n- Both M₁ and M₂ are in **saturation** (valid for typical analog IC design).\n- $ V_{b1} $ is a fixed bias voltage to ensure M₂ operates in saturation.\n- All transistors have threshold voltage $ V_{th} $, mobility $ \\mu $, and oxide capacitance $ C_{ox} $.\n\n#### **Current Equations**\n1. **For M₂ (Diode-Connected NMOS)**:\n   - $ V_{GS2} = V_{out} - V_{b1} $\n   - $ V_{DS2} = V_{out} - V_{b1} = V_{GS2} $ → Always in saturation if $ V_{GS2} > V_{th} $.\n   - **Drain Current**:\n     $$\n     I_{M2} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{out} - V_{b1} - V_{th})^2\n     $$\n\n2. **For M₁ (NMOS)**:\n   - $ V_{GS1} = V_{in} $\n   - $ V_{DS1} = V_{out} $\n   - **Drain Current** (assuming saturation):\n     $$\n     I_{M1} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{in} - V_{th})^2\n     $$\n\n3. **KCL at Node $ V_{out} $**:\n   - Current from $ I_1 $ flows **into** $ V_{out} $.\n   - Current through M₁ flows **out of** $ V_{out} $ (to ground).\n   - Current through M₂ flows **out of** $ V_{out} $ (to $ V_{b1} $).\n   - Thus:\n     $$\n     I_1 = I_{M1} + I_{M2}\n     $$\n\n#### **Output Voltage Equation**\nSubstitute $ I_{M1} $ and $ I_{M2} $ into KCL:\n$$\nI_1 = \\frac{1}{2} \\mu_n C_{ox} \\left[ \\left( \\frac{W}{L} \\right)_1 (V_{in} - V_{th})^2 + \\left( \\frac{W}{L} \\right)_2 (V_{out} - V_{b1} - V_{th})^2 \\right]\n$$\n\nSolve for $ V_{out} $:\n$$\nV_{out} = V_{b1} + V_{th} + \\sqrt{ \\frac{2I_1}{\\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2} - \\left( \\frac{W/L}_1}{W/L}_2 \\right) (V_{in} - V_{th})^2 }\n$$\n\n> **Key Insight**:  \n> $ V_{out} $ is a **nonlinear function** of $ V_{in} $. The circuit behaves as a **voltage-to-voltage converter** with **square-law characteristics** (typical of MOSFETs in saturation).\n\n---\n\n---\n\n### **🔹 Small-Signal Analysis (AC Behavior)**\nFor small-signal analysis (assuming $ V_{in} $ varies around a DC bias point):\n\n#### **Transconductance of M₁**\n- Small-signal drain current:\n  $$\n  i_{d1} = g_{m1} v_{in}, \\quad \\text{where } g_{m1} = \\sqrt{2 \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 I_{M1}}\n  $$\n\n#### **Output Resistance**\n- **M₂ (Diode-Connected)**:\n  - Acts as a **resistor** in small-signal model:\n    $$\n    r_{o2} \\approx \\frac{1}{g_{m2}}, \\quad \\text{where } g_{m2} = \\sqrt{2 \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 I_{M2}}\n    $$\n- **M₁**:\n  - Output resistance $ r_{o1} $ (channel-length modulation effect).\n- **Current Source $ I_1 $**:\n  - Ideal current source has **infinite output resistance**.\n\n#### **Voltage Gain**\n- The circuit resembles a **common-source amplifier** with a **diode-connected load (M₂)**.\n- Small-signal voltage gain:\n  $$\n  A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} \\cdot (r_{o1} \\parallel r_{o2})\n  $$\n  - Negative sign indicates **inverting gain**.\n  - Gain is **nonlinear** due to square-law behavior of MOSFETs.\n\n---\n\n---\n\n### **🔹 Key Observations**\n| **Aspect**               | **Description**                                                                 |\n|--------------------------|---------------------------------------------------------------------------------|\n| **Function**             | Nonlinear voltage amplifier (or voltage-to-voltage converter).                 |\n| **M₂ Role**              | Diode-connected transistor to set a **reference current** and stabilize $ V_{out} $. |\n| **M₁ Role**              | Input transistor (controlled by $ V_{in} $).                                   |\n| **Current Source $ I_1 $** | Provides **bias current** to the node $ V_{out} $.                            |\n| **Bias $ V_{b1} $**     | Ensures M₂ operates in saturation (typically $ V_{b1} < V_{out} $).          |\n| **Output Range**         | $ V_{out} > V_{b1} + V_{th} $ (for M₂ saturation) and $ V_{out} \\geq V_{in} - V_{th} $ (for M₁ saturation). |\n\n---\n\n---\n\n### **🔹 Practical Implications**\n1. **Biasing**:\n   - $ V_{b1} $ must be chosen such that $ V_{out} > V_{b1} + V_{th} $ to keep M₂ in saturation.\n   - $ I_1 $ must be large enough to ensure both M₁ and M₂ operate in saturation for the expected $ V_{in} $ range.\n\n2. **Applications**:\n   - **Nonlinear signal processing** (e.g., squaring circuits, analog multipliers).\n   - **Biasing networks** in analog ICs (e.g., current mirrors with input control).\n   - **Amplifiers** in mixed-signal circuits (though nonlinearity limits use in precision applications).\n\n3. **Limitations**:\n   - **Nonlinear transfer function** (not suitable for linear amplification without compensation).\n   - **Sensitivity to $ V_{b1} $** and process variations (threshold voltage $ V_{th} $).\n\n---\n\n### **🔚 Summary**\nThis circuit is a **diode-connected NMOS (M₂) with a current source (I₁) and an input-controlled NMOS (M₁)**. It functions as a **nonlinear voltage amplifier**, where:\n- **$ V_{out} $** depends on **$ V_{in} $** via a square-law relationship.\n- **M₂** provides a **self-biased current path**, stabilizing the operating point.\n- The **gain is nonlinear** but can be used in specific analog applications (e.g., signal conditioning, nonlinear computation).\n\nFor **linear amplification**, this circuit would need modification (e.g., adding a linearizing stage or feedback). However, as-is, it is a **fundamental building block** in analog CMOS design for nonlinear signal processing.",
        "format": "markdown",
        "sha256": "1c050153ea0ee7f7d3325a262e67aee1d9d19dc5c64adbcec412bebae6f41e87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2 as diode-connected and places M1's drain at the output, instead of recognizing the NMOS common-gate cascode and intermediate node X. Its operating-point and gain analysis therefore describe the wrong topology.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1486,
        "output_tokens": 11633,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9711,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1486,
        "output_tokens": 11633,
        "total_tokens": 13119,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9711,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **PMOS-NMOS cascode stage** with a current source $ I_1 $, designed to provide high output impedance and improved gain. Below is a detailed analysis of its operation, DC behavior, and key characteristics.\n\n---\n\n---\n\n### **🔹 Circuit Topology & Transistor Roles**\n- **$ M_1 $**: NMOS transistor (input stage)  \n  - **Gate**: $ V_{\\text{in}} $  \n  - **Source**: Ground  \n  - **Drain**: Node $ X $  \n- **$ M_2 $**: PMOS transistor (cascode stage)  \n  - **Gate**: $ V_{b1} $ (bias voltage)  \n  - **Source**: Node $ X $  \n  - **Drain**: Node $ A $ (connected to $ V_{\\text{out}} $)  \n- **Current Source $ I_1 $**:  \n  - Connected between $ V_{DD} $ and node $ A $ (i.e., $ V_{\\text{out}} $)  \n  - Sets the **bias current** $ I_1 $ through both $ M_1 $ and $ M_2 $\n\nThis configuration forms a **cascode amplifier**, where:\n- $ M_1 $ acts as the **input transistor** (common-source stage).\n- $ M_2 $ acts as the **cascode transistor**, increasing the **output resistance** and **gain** of the circuit.\n\n---\n\n---\n\n### **🔹 DC Analysis**\n\n#### **1. Current Flow**\n- The current source $ I_1 $ forces a constant current $ I_1 $ through the series path:  \n  $$\n  V_{DD} \\xrightarrow{I_1} V_{\\text{out}} \\xrightarrow{M_2} X \\xrightarrow{M_1} \\text{GND}\n  $$\n  Thus, **$ I_1 $ is the drain current for both $ M_1 $ and $ M_2 $**.\n\n#### **2. Operating Regions**\nFor proper operation, both transistors must be in **saturation**:\n- **$ M_1 $ (NMOS)**:\n  - **Saturation condition**: $ V_{DS1} = V_X \\geq V_{GS1} - V_{thn} $\n  - **Current equation**:\n    $$\n    I_1 = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{\\text{in}} - V_{thn})^2\n    $$\n    Solving for $ V_{\\text{in}} $:\n    $$\n    V_{\\text{in}} = V_{thn} + \\sqrt{\\frac{2 I_1}{\\mu_n C_{ox} (W/L)_1}}\n    $$\n\n- **$ M_2 $ (PMOS)**:\n  - **Saturation condition**: $ V_{SD2} = V_X - V_{\\text{out}} \\geq V_{SG2} - |V_{thp}| $\n  - **Current equation**:\n    $$\n    I_1 = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{X} - V_{b1} - |V_{thp}|)^2\n    $$\n    Solving for $ V_X $:\n    $$\n    V_X = V_{b1} + |V_{thp}| + \\sqrt{\\frac{2 I_1}{\\mu_p C_{ox} (W/L)_2}}\n    $$\n\n#### **3. Output Voltage $ V_{\\text{out}} $**\n- $ V_{\\text{out}} $ is the **drain voltage of $ M_2 $**.\n- From the saturation condition of $ M_2 $:\n  $$\n  V_{\\text{out}} \\leq V_{b1} + |V_{thp}|\n  $$\n- In practice, $ V_{\\text{out}} $ is determined by the **load** (if any), but for **DC analysis without a load**, it is constrained by the requirement that $ M_2 $ remains in saturation:\n  $$\n  V_{\\text{out}} = V_X - (V_{SG2} - |V_{thp}|) = V_{b1} + |V_{thp}|\n  $$\n  (This is the **minimum** $ V_{\\text{out}} $ for $ M_2 $ to stay in saturation.)\n\n---\n\n---\n\n### **🔹 Key Characteristics**\n\n| **Parameter**         | **Expression**                                                                 | **Interpretation**                                                                 |\n|------------------------|-------------------------------------------------------------------------------|-----------------------------------------------------------------------------------|\n| Input Voltage $ V_{\\text{in}} $ | $ V_{thn} + \\sqrt{\\frac{2 I_1}{\\mu_n C_{ox} (W/L)_1}} $                  | Determines the gate voltage needed to sustain current $ I_1 $.                  |\n| Node Voltage $ V_X $  | $ V_{b1} + |V_{thp}| + \\sqrt{\\frac{2 I_1}{\\mu_p C_{ox} (W/L)_2}} $ | Voltage at the drain of $ M_1 $ and source of $ M_2 $.                          |\n| Output Voltage $ V_{\\text{out}} $ | $ \\leq V_{b1} + |V_{thp}| $                                            | Constrained by $ M_2 $ saturation.                                                |\n| Bias Condition        | $ V_{b1} + |V_{thp}| + \\sqrt{\\frac{2 I_1}{\\mu_p C_{ox} (W/L)_2}} \\geq \\sqrt{\\frac{2 I_1}{\\mu_n C_{ox} (W/L)_1}} $ | Ensures both $ M_1 $ and $ M_2 $ are in saturation.                             |\n\n---\n\n---\n\n### **🔹 Why This Configuration?**\nThis **cascode topology** is used to:\n1. **Increase Output Resistance**: The cascode transistor $ M_2 $ isolates the input transistor $ M_1 $ from the output node, reducing the **Miller effect** and improving **gain**.\n2. **Improve Bandwidth**: Higher output resistance leads to better **gain-bandwidth product**.\n3. **Stabilize Bias Current**: The current source $ I_1 $ ensures a **stable bias current** independent of supply voltage variations.\n\n---\n\n---\n\n### **🔹 Summary**\n- **Function**: This is a **PMOS-NMOS cascode amplifier** with a current source $ I_1 $.\n- **Input**: $ V_{\\text{in}} $ controls the current through $ M_1 $.\n- **Bias**: $ V_{b1} $ sets the operating point of $ M_2 $ to maintain saturation.\n- **Output**: $ V_{\\text{out}} $ is the drain voltage of $ M_2 $, constrained by $ V_{b1} + |V_{thp}| $.\n- **Key Advantage**: High output impedance and improved gain due to the cascode structure.\n\n---\n\n### **📌 Final Answer**\nThe circuit is a **PMOS-NMOS cascode stage** with a current source $ I_1 $. It operates as follows:\n- $ M_1 $ (NMOS) acts as the input transistor, with $ V_{\\text{in}} $ controlling its drain current.\n- $ M_2 $ (PMOS) acts as the cascode transistor, increasing output resistance.\n- The current source $ I_1 $ sets the bias current through both transistors.\n- **DC Output Voltage**: $ V_{\\text{out}} \\leq V_{b1} + |V_{thp}| $ (to keep $ M_2 $ in saturation).\n- **Input Voltage**: $ V_{\\text{in}} = V_{thn} + \\sqrt{\\frac{2 I_1}{\\mu_n C_{ox} (W/L)_1}} $.\n- **Node X Voltage**: $ V_X = V_{b1} + |V_{thp}| + \\sqrt{\\frac{2 I_1}{\\mu_p C_{ox} (W/L)_2}} $.\n\nThis configuration is commonly used in **high-gain amplifiers** and **bias circuits** due to its superior performance in terms of gain, bandwidth, and stability.",
        "format": "markdown",
        "sha256": "cb989bb172d08b762ba056c9061cf19ea2bd1e28262731d80754ada001b2928b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly identifies M2 as a PMOS; it is an NMOS common-gate cascode. Its polarity-dependent DC analysis is therefore wrong, and it does not provide the small-signal gain required for the essential analysis.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1486,
        "output_tokens": 16239,
        "total_tokens": 17725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1486,
        "output_tokens": 16239,
        "total_tokens": 17725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Current Mirror with Cascode Configuration**\n\nThe given circuit is a **current mirror with a cascode transistor**, where:\n- **$ M_1 $** is an **NMOS transistor** (input stage, with gate $ V_{in} $, source grounded).\n- **$ M_2 $** is a **PMOS transistor** (cascode stage, with gate $ V_{b1} $, source connected to node $ X $).\n- **$ I_1 $** is a **current source** providing a reference current $ I_1 $ from $ V_{DD} $ to the output node $ V_{out} $.\n\n---\n\n---\n\n## **🔹 Key Observations**\n\n1. **Current Flow**:\n   - The current source $ I_1 $ forces a current $ I_1 $ through the path:\n     $$\n     V_{DD} \\xrightarrow{I_1} V_{out} \\xrightarrow{M_2} X \\xrightarrow{M_1} \\text{GND}\n     $$\n   - Therefore, **$ I_{d1} = I_{d2} = I_1 $** (KCL at nodes $ V_{out} $ and $ X $).\n\n2. **Transistor Roles**:\n   - $ M_1 $: **Input transistor** (NMOS), controls the current $ I_1 $ via $ V_{in} $.\n   - $ M_2 $: **Cascode transistor** (PMOS), improves output resistance and ensures $ M_1 $ remains in saturation.\n\n3. **Assumption**:\n   - Both transistors are **in saturation** (typical for analog design to maximize gain and output resistance).\n\n---\n\n---\n\n## **🔹 DC Analysis**\n\n### **1. For $ M_1 $ (NMOS)**\n- **Drain current**:\n  $$\n  I_1 = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{in} - V_{thn})^2\n  $$\n- **Solving for $ V_{in} $**:\n  $$\n  V_{in} = V_{thn} + \\sqrt{\\frac{2 I_1}{\\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1}}\n  $$\n- **Saturation condition**:\n  $$\n  V_X \\geq V_{in} - V_{thn}\n  $$\n\n### **2. For $ M_2 $ (PMOS)**\n- **Drain current**:\n  $$\n  I_1 = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{sg} - |V_{thp}|)^2\n  $$\n  where $ V_{sg} = V_{out} - V_{b1} $ (source-to-gate voltage).\n- **Solving for $ V_{out} $**:\n  $$\n  V_{out} = V_{b1} + |V_{thp}| + \\sqrt{\\frac{2 I_1}{\\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2}}\n  $$\n- **Saturation condition**:\n  $$\n  V_{sd} = V_{out} - V_X \\geq V_{sg} - |V_{thp}| \\Rightarrow V_X \\leq V_{b1} + |V_{thp}|\n  $$\n\n---\n\n---\n\n## **🔹 Operating Conditions**\n\nTo ensure **both transistors remain in saturation**:\n- From $ M_1 $: $ V_X \\geq V_{in} - V_{thn} $\n- From $ M_2 $: $ V_X \\leq V_{b1} + |V_{thp}| $\n\nThus, the **bias voltage $ V_{b1} $** must satisfy:\n$$\nV_{in} - V_{thn} \\leq V_{b1} + |V_{thp}|\n$$\nThis ensures that node $ X $ lies within the valid range for both transistors to operate in saturation.\n\n---\n\n---\n\n## **🔹 Circuit Functionality**\n\n- **Current Mirror**: The circuit enforces $ I_{d1} = I_{d2} = I_1 $, acting as a **current mirror** with $ M_1 $ as the reference and $ M_2 $ as the output transistor.\n- **Cascode Configuration**: $ M_2 $ (PMOS) acts as a **cascode transistor**, which:\n  - **Increases output resistance** (reduces Early effect).\n  - **Improves accuracy** of the current mirror by keeping $ M_1 $ in saturation over a wider range of $ V_{out} $.\n- **Output Voltage**: $ V_{out} $ is determined by the **PMOS $ M_2 $** and the reference current $ I_1 $, as derived above.\n\n---\n\n---\n\n## **🔹 Summary of Key Results**\n\n| Parameter | Expression |\n|-----------|------------|\n| **$ V_{in} $** | $ V_{thn} + \\sqrt{\\dfrac{2 I_1}{\\mu_n C_{ox} \\left( \\dfrac{W}{L} \\right)_1}} $ |\n| **$ V_{out} $** | $ V_{b1} + |V_{thp}| + \\sqrt{\\dfrac{2 I_1}{\\mu_p C_{ox} \\left( \\dfrac{W}{L} \\right)_2}} $ |\n| **Saturation Condition** | $ V_{in} - V_{thn} \\leq V_{b1} + |V_{thp}| $ |\n\n---\n\n---\n\n## **🔹 Conclusion**\n\nThis circuit is a **cascode current mirror** that:\n- **Copies the current $ I_1 $** from the input transistor $ M_1 $ to the output node $ V_{out} $ via $ M_2 $.\n- **Uses $ V_{b1} $** to bias $ M_2 $ in saturation, ensuring high output resistance and accurate current replication.\n- **Output voltage $ V_{out} $** is determined by the **PMOS $ M_2 $** and the reference current $ I_1 $, with the expression:\n  $$\n  V_{out} = V_{b1} + |V_{thp}| + \\sqrt{\\frac{2 I_1}{\\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2}}\n  $$\n\nThis configuration is commonly used in **precision current mirrors, biasing circuits, and analog signal processing** where high output impedance and accurate current copying are critical.",
        "format": "markdown",
        "sha256": "c6e768afc229f3f52980ff0b862f4fdab6573e898ff80d4766ec6b58e4675ef8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2 as PMOS and the circuit as a current mirror, rather than an NMOS common-gate cascode gain stage. It also does not analyze the voltage gain.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1486,
        "output_tokens": 8567,
        "total_tokens": 10053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1486,
        "output_tokens": 8567,
        "total_tokens": 10053,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether the circuit is a **cascode structure**, we analyze its configuration and transistor arrangement.\n\n---\n\n### 🔍 **Cascode Circuit Definition**\nA **cascode** is a two-stage amplifier configuration where:\n- The **first transistor (M₁)** operates in **common-source** mode.\n- The **second transistor (M₂)** operates in **common-gate** mode.\n- These transistors are **stacked** such that the drain of M₁ connects to the source of M₂.\n- This arrangement **reduces the Miller effect**, improving bandwidth and gain.\n\n---\n\n### 🧪 **Circuit Analysis**\n\nFrom the diagram:\n- **M₁** has its **source connected to ground**, **gate driven by $ V_{in} $**, and **drain connected to the source of M₂**.\n- **M₂** has its **source connected to the drain of M₁**, **gate biased at $ V_{b1} $**, and **drain connected to $ R_D $** and $ V_{out} $.\n- The **drain of M₂** is connected to the **load resistor $ R_D $** and the output node $ V_{out} $, with $ V_{DD} $ as the supply.\n\nThis matches the classic **cascode topology**:\n- **M₁** acts as a **common-source** stage.\n- **M₂** acts as a **common-gate** stage.\n- The two transistors are **stacked**, with M₁'s drain feeding into M₂'s source.\n\nThe **bias voltage $ V_{b1} $** ensures that M₂ remains in saturation, which is typical for a cascode configuration.\n\n---\n\n### ✅ **Conclusion**\n\nYes, the circuit shown is a **cascode structure**. It consists of a **common-source transistor (M₁)** followed by a **common-gate transistor (M₂)**, forming the characteristic stacked configuration of a cascode amplifier.\n\n**Answer:** Yes, the circuit is a cascode structure.",
        "format": "markdown",
        "sha256": "31d5417c035161adce34e25a3ed4419c77f1b79e08582613b05bb4a2bea0ecf7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and treats M1 as a common-source device. M1 is a PMOS source follower with its drain grounded, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 781,
        "total_tokens": 2338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 781,
        "total_tokens": 2338,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 357,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure **is a cascode structure**.\n\n### Explanation:\nA **cascode** is a two-stage amplifier configuration where:\n- The **first transistor** (M₁) operates as a **common-source (CS)** stage (input at its gate, source grounded).\n- The **second transistor** (M₂) operates as a **common-gate (CG)** stage (gate biased at a fixed voltage *V<sub>b1</sub>*, source connected to the drain of M₁).\n\nIn the given circuit:\n- **M₁** (PMOS) has its gate driven by *V<sub>in</sub>* and source grounded, forming a **common-source stage**.\n- **M₂** (PMOS) has its gate biased at *V<sub>b1</sub>* (a fixed voltage), and its source connected to the drain of M₁, forming a **common-gate stage**.\n- The drain of M₂ connects to *R<sub>D</sub>* and *V<sub>DD</sub>*, with *V<sub>out</sub>* taken from this node.\n\nThis **stacking of a CS and CG stage** is the defining feature of a **cascode**. The configuration improves gain, bandwidth, and output resistance compared to a single-stage amplifier.\n\n### Conclusion:\nYes, the circuit is a **PMOS cascode amplifier** (a cascode structure).  \n**Answer:** Yes, it is a cascode structure.",
        "format": "markdown",
        "sha256": "311828af910611054ee3e32360634200ae0d8f9b9629e33ab0591d05448ce517"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device. M1 is a PMOS source follower, so the cascode resistance boost is absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 942,
        "total_tokens": 2499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 942,
        "total_tokens": 2499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure is indeed a **cascode structure**.\n\n### Key Analysis:\n1. **Configuration**:  \n   - **M₁** is configured as a **common-source** stage (input at its gate, source grounded).  \n   - **M₂** is configured as a **common-gate** stage (input at its source, gate biased at *V<sub>b1</sub>*).  \n   - The drain of M₁ connects to the source of M₂, forming a **series cascade** of the two transistors.  \n\n2. **Cascode Definition**:  \n   A cascode amplifier combines a common-source (or common-emitter) transistor with a common-gate (or common-base) transistor in series. This configuration improves **gain**, **output resistance**, and **bandwidth** by isolating the input stage from the output load.  \n\n3. **Circuit Verification**:  \n   - Input: *V<sub>in</sub>* → Gate of M₁ (common-source).  \n   - Intermediate node: Drain of M₁ (output of common-source) → Source of M₂ (input of common-gate).  \n   - Output: Drain of M₂ (common-gate stage) → *V<sub>out</sub>*.  \n   - *V<sub>b1</sub>* provides a fixed bias for M₂’s gate, enabling its common-gate operation.  \n\n### Conclusion:\nThe circuit matches the **classic NMOS cascode topology** (common-source + common-gate in series). Thus, **yes, it is a cascode structure**.\n\n**Answer:** Yes, the circuit is a cascode structure.",
        "format": "markdown",
        "sha256": "5f08248df160b00cdb5e2d6e23d194b0bd7431e7e5d858ff64c2cf88f66d4ffb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a grounded-source common-source device; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 807,
        "total_tokens": 2364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 444,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1557,
        "output_tokens": 807,
        "total_tokens": 2364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 444,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect arises because the **gate-drain capacitance (C<sub>gd</sub>)** in a common-source (or common-emitter) amplifier is *bootstrapped* by the amplifier’s own gain. When the input signal causes a voltage swing at the drain, the C<sub>gd</sub> capacitance effectively \"sees\" a larger voltage difference than the input alone, multiplying its impact on the input capacitance by **(1 + |A<sub>v</sub>|)**, where **A<sub>v</sub>** is the voltage gain from the input to the drain. This drastically increases the input capacitance, degrading high-frequency performance.\n\n---\n\n### **Why the Cascode Reduces the Miller Effect**\nA **cascode amplifier** combines a **common-source (CS) stage** with a **common-gate (CG) stage** (or common-emitter + common-base for BJTs). The key to its immunity to the Miller effect lies in **isolating the high-gain node from the input capacitance**:\n\n1. **Low-Impedance Intermediate Node**\n   - In a cascode, the **drain of the CS transistor** (M1) connects to the **source of the CG transistor** (M2).\n   - The **input impedance of the CG stage** is very low (≈ **1/g<sub>m2</sub>** for MOSFETs).\n   - This forces the **drain of M1** to have **minimal AC voltage swing**—its voltage is nearly constant (a \"virtual AC ground\" for small signals).\n\n2. **Reduced Gain to the Intermediate Node**\n   - The voltage gain from the **gate of M1 to its drain** is:\n     **A<sub>1</sub> = –g<sub>m1</sub> · Z<sub>in,CG</sub> ≈ –g<sub>m1</sub> · (1/g<sub>m2</sub>) ≈ –1** (if g<sub>m1</sub> ≈ g<sub>m2</sub>).\n   - Since **|A<sub>1</sub>| ≈ 1**, the Miller multiplication factor for C<sub>gd1</sub> becomes:\n     **C<sub>gd,eff</sub> = C<sub>gd1</sub> · (1 + |A<sub>1</sub>|) ≈ 2·C<sub>gd1</sub>** (vs. **10·C<sub>gd</sub>+** in a high-gain CS stage).\n\n3. **No Miller Effect for the CG Stage**\n   - The **gate of M2** is **AC-grounded** (biased at a fixed DC voltage), so its **C<sub>gd2</sub>** has no voltage swing across it. Thus, it contributes **no Miller multiplication** to the input.\n\n4. **Overall Gain Remains High**\n   - The **total gain** of the cascode is still large (≈ **–g<sub>m1</sub> · R<sub>L</sub>**, where R<sub>L</sub> is the load at M2’s drain), but the **intermediate node (M1’s drain) sees almost no signal swing**, breaking the feedback loop that causes the Miller effect.\n\n---\n\n### **Key Insight**\nThe Miller effect is **proportional to the voltage gain between the two terminals of the parasitic capacitance**. In a cascode:\n- The **C<sub>gd</sub> of the input transistor (M1)** sees **almost no voltage swing at its drain** (due to the CG stage’s low input impedance).\n- Thus, **C<sub>gd</sub> behaves almost like a regular input capacitance (C<sub>gs</sub>)**—no multiplication occurs.\n- The **CG stage’s C<sub>gd</sub>** is irrelevant to the input because its gate is AC-grounded.\n\n---\n\n### **Comparison: Single CS vs. Cascode**\n| **Parameter**               | **Common-Source Amplifier** | **Cascode Amplifier**       |\n|-----------------------------|-----------------------------|-----------------------------|\n| Gain (gate → drain of M1)   | High (e.g., –10 to –100)    | ≈ –1                        |\n| Miller multiplication       | **C<sub>gd</sub> · (1 + |A<sub>v</sub>|)** | **≈ 2·C<sub>gd</sub>**      |\n| Input capacitance           | **C<sub>gs</sub> + C<sub>gd</sub>·(1 + |A<sub>v</sub>|)** | **C<sub>gs1</sub> + 2·C<sub>gd1</sub>** |\n| Bandwidth                   | Degraded by Miller effect   | **Much higher** (less C<sub>in</sub>) |\n\n---\n### **Conclusion**\nThe Miller effect is **less pronounced in a cascode** because the **drain of the input transistor** (where C<sub>gd</sub> connects) is held at a **near-constant AC voltage** by the low-input-impedance common-gate stage. This eliminates the large voltage swing needed for the Miller multiplication, reducing the effective input capacitance and preserving high-frequency performance. The cascode essentially **decouples the high-gain path from the parasitic capacitance**, breaking the feedback loop that amplifies C<sub>gd</sub>.",
        "format": "markdown",
        "sha256": "0a06e3beff9008b3c5c8a5554cb65c6d9f7fd6a0ef7f7cea26c82c8c9742611c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly −1 gain across Cgd1, giving about 2× capacitance rather than full-stage-gain multiplication. It overstates the node as nearly an AC ground in places, but the golden solution treats that as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 3232,
        "total_tokens": 3261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 3232,
        "total_tokens": 3261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2046,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** arises when a **feedback capacitance** (e.g., the gate-drain capacitance \\( C_{gd} \\) in a MOSFET) exists between the input and output of an amplifier. Due to the **voltage gain** (\\( A_v \\)) of the stage, this capacitance appears **amplified** at the input by a factor of \\( (1 + |A_v|) \\), significantly degrading high-frequency performance. In a **common-source amplifier**, for example, the large voltage swing at the drain (output) node causes \\( C_{gd} \\) to be multiplied by \\( (1 + A_v) \\), where \\( A_v \\) can be large (e.g., -100), making the effective input capacitance **orders of magnitude larger** than the physical \\( C_{gd} \\).\n\n---\n\n### **Why the Miller Effect is Reduced in a Cascode**\nA **cascode amplifier** (typically a **common-source stage followed by a common-gate stage**) mitigates the Miller effect through **two key mechanisms**:\n\n#### 1. **Low Voltage Swing at the Intermediate Node**\n   - In a cascode, the **drain of the input transistor (M1)** is connected to the **source of the cascode transistor (M2)**.\n   - The **common-gate stage (M2)** acts as a **current buffer**, forcing the **intermediate node (drain of M1 / source of M2)** to have a **minimal voltage swing**.\n     - For M2 (common-gate), the small-signal voltage at its source is approximately:\n       \\[\n       V_{s2} \\approx \\frac{V_{gs2}}{1 + g_{m2} R_S} \\quad \\text{(where \\( R_S \\) is the source impedance)}\n       \\]\n       If M2 is biased properly, \\( V_{s2} \\) (the intermediate node) remains **nearly constant** for small-signal inputs.\n   - Since the **voltage gain from the input (gate of M1) to the intermediate node (drain of M1)** is **small** (typically \\( A_{v1} \\approx -1 \\) if \\( g_{m1} \\approx g_{m2} \\)), the **Miller multiplication factor** for \\( C_{gd1} \\) (the gate-drain capacitance of M1) becomes:\n     \\[\n     C_{in,eff} = C_{gd1} \\cdot (1 + |A_{v1}|) \\approx C_{gd1} \\cdot 2\n     \\]\n     (vs. \\( C_{gd} \\cdot (1 + |A_v|) \\) in a single-stage amplifier, where \\( |A_v| \\gg 1 \\)).\n\n#### 2. **Isolation of the High-Gain Node**\n   - In a single-stage amplifier, the **drain node** (output) has a **large voltage swing**, directly coupling \\( C_{gd} \\) back to the input.\n   - In a cascode, the **high-gain node (drain of M2)** is **isolated** from the input transistor’s \\( C_{gd} \\):\n     - The **primary feedback capacitance** (\\( C_{gd1} \\)) is between the **input (gate of M1)** and the **intermediate node (drain of M1)**, which has **low voltage swing**.\n     - The **secondary feedback capacitance** (\\( C_{gd2} \\), between gate and drain of M2) does not affect the input because:\n       - The **gate of M2** is **AC-grounded** (biased at a fixed DC voltage).\n       - The **input of the cascode is the gate of M1**, not M2’s gate.\n\n---\n\n### **Key Takeaways**\n| **Parameter**               | **Single-Stage (Common-Source)** | **Cascode** |\n|-----------------------------|----------------------------------|-------------|\n| Voltage gain to \\( C_{gd} \\) node | Large (\\( |A_v| \\gg 1 \\)) | Small (\\( |A_{v1}| \\approx 1 \\)) |\n| Miller multiplication factor | \\( 1 + |A_v| \\) (e.g., 101) | \\( 1 + |A_{v1}| \\approx 2 \\) |\n| Effective input capacitance | \\( C_{gd} \\cdot (1 + |A_v|) \\) | \\( C_{gd1} \\cdot 2 \\) |\n| High-frequency performance | Poor (due to large \\( C_{in,eff} \\)) | **Improved** (reduced \\( C_{in,eff} \\)) |\n\n---\n### **Conclusion**\nThe Miller effect is **less pronounced in a cascode** because the **intermediate node (drain of the input transistor)** has a **minimal voltage swing** due to the common-gate stage acting as a current buffer. This reduces the **effective gain** seen by the feedback capacitance \\( C_{gd} \\), lowering the Miller multiplication factor from \\( (1 + |A_v|) \\) (large in a single stage) to a much smaller value (e.g., ~2). As a result, the **input capacitance remains small**, preserving **bandwidth and high-frequency response**. This is why cascodes are widely used in **high-speed analog circuits** (e.g., RF amplifiers, operational amplifiers).",
        "format": "markdown",
        "sha256": "9c98891b5b34d0e400b4826e5e0cc3623a755f829fbe233111903fab1e2e142e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance M1-drain/M2-source node and the resulting gain across Cgd1 of roughly −1, giving a Miller factor near 2 rather than the full-stage gain. The ‘minimal swing’ wording slightly overstates the effect, but the answer’s explicit estimate captures the essential mechanism.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 3280,
        "total_tokens": 3309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 3280,
        "total_tokens": 3309,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** refers to the **apparent multiplication of input capacitance** in an amplifier due to **feedback capacitance** (e.g., \\( C_{gd} \\) in MOSFETs or \\( C_{\\mu} \\) in BJTs) between the input and output nodes. In a **common-source (CS) or common-emitter (CE) amplifier**, this capacitance is multiplied by the **voltage gain** of the stage, leading to:\n\n\\[\nC_{in, \\text{eff}} = C_{gs} + C_{gd} \\cdot (1 + A_v)\n\\]\n\nwhere \\( A_v \\) is the voltage gain from input to output. For high-gain stages, this can **severely degrade bandwidth** by increasing the input time constant.\n\n---\n\n### **Why the Miller Effect is Less Pronounced in a Cascode**\nA **cascode** combines a **CS (or CE) stage** with a **common-gate (CG) or common-base (CB) stage**. The key to reducing the Miller effect lies in **how the intermediate node (drain of the CS stage) behaves**:\n\n1. **Reduced Voltage Swing at the Intermediate Node**\n   - In a standalone CS amplifier, the **drain voltage swings significantly** (inverted and amplified relative to the input).\n   - In a cascode, the **drain of the CS transistor is connected to the source of the CG transistor**.\n   - The **CG stage has a low input impedance** (\\( \\approx 1/g_m \\)), so the **voltage at the intermediate node (drain of CS) remains nearly constant** (small swing).\n   - As a result, the **voltage gain from the input (gate of CS) to the intermediate node is ≈ -1** (not large).\n\n2. **Miller Multiplication Factor Collapses to ~2**\n   - The feedback capacitance \\( C_{gd} \\) (between gate and drain of the CS transistor) now sees a **gain of ≈ -1** (instead of a large \\( A_v \\)).\n   - The **Miller multiplication factor** becomes:\n     \\[\n     1 + |A_{v, \\text{intermediate}}| = 1 + 1 = 2\n     \\]\n   - Thus, the **effective input capacitance** due to \\( C_{gd} \\) is only **doubled** (\\( 2 \\cdot C_{gd} \\)), rather than multiplied by \\( (1 + A_v) \\) (which could be **10–100×** in a high-gain CS stage).\n\n3. **The True High-Gain Node is Isolated**\n   - The **full voltage gain** of the cascode appears **between the input (gate of CS) and the final output (source of CG)**.\n   - However, \\( C_{gd} \\) is **not between the input and the final output**—it is between the input and the **intermediate node**, which has minimal swing.\n   - The **Miller effect is only significant when the feedback capacitance connects a high-swing input to a high-swing output**. In the cascode, the **output swing is decoupled from the intermediate node**, breaking the strong feedback loop.\n\n---\n\n### **Mathematical Comparison**\n| Configuration       | Voltage Gain (Input → \\( C_{gd} \\) Node) | Miller Multiplication Factor | Effective \\( C_{gd} \\) |\n|--------------------|------------------------------------------|-------------------------------|------------------------|\n| **Standalone CS**  | \\( A_v = -g_m R_D \\) (large)             | \\( 1 + |A_v| \\) (e.g., 50×)       | \\( 50 \\cdot C_{gd} \\) |\n| **Cascode**        | \\( A_v \\approx -1 \\)                     | \\( 1 + 1 = 2 \\)               | \\( 2 \\cdot C_{gd} \\)   |\n\n---\n\n### **Intuitive Summary**\nThe cascode **breaks the direct feedback path** that causes the Miller effect by:\n1. **Buffering the intermediate node** (via the CG stage), so its voltage doesn’t swing much.\n2. **Reducing the effective gain** seen by \\( C_{gd} \\) from a large value (e.g., -50) to **≈ -1**.\n3. **Shifting the high-gain action** to the output of the CG stage, where \\( C_{gd} \\) no longer plays a dominant role.\n\nThus, the **Miller effect is suppressed**, leading to **higher bandwidth** and **better high-frequency performance**—a key advantage of the cascode configuration.",
        "format": "markdown",
        "sha256": "0497eba68ef35bb1f849b00ce886c2d05deddda6d05fc294f6a26c53d24c9f47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly explains that the common-gate device creates a low-impedance intermediate node, so the gain across M1’s Cgd is about −1 and its Miller factor is about 2. However, it incorrectly identifies the common-gate transistor’s source as the final output, contradicting its otherwise sound description of that node as the low-swing intermediate node.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2165,
        "total_tokens": 2194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 2165,
        "total_tokens": 2194,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure consists of **two MOSFETs (M₁ and M₂)** configured in a **complementary push-pull topology**, where their **drains are tied together at the output node $ V_{\\text{out}} $**. Below is a structured analysis of the circuit's behavior, operating regions, and key relationships.\n\n---\n\n---\n\n### **🔹 Circuit Configuration**\n- **M₁ (PMOS)**:\n  - **Source**: Connected to $ V_{DD} $\n  - **Gate**: Driven by bias voltage $ V_{b2} $\n  - **Drain**: Connected to $ V_{\\text{out}} $\n  \n- **M₂ (NMOS)**:\n  - **Source**: Connected to bias voltage $ V_{b1} $\n  - **Gate**: Driven by input voltage $ V_{\\text{in}} $\n  - **Drain**: Connected to $ V_{\\text{out}} $\n\nThis configuration forms a **series path** from $ V_{DD} \\rightarrow M_1 \\rightarrow V_{\\text{out}} \\rightarrow M_2 \\rightarrow V_{b1} $. The **current through both transistors must be equal** ($ I_{M1} = I_{M2} $), as there is no other path for current.\n\n---\n\n---\n\n### **🔹 Operating Regions**\nThe behavior of the circuit depends on the **bias voltages $ V_{b1}, V_{b2} $** and the **input $ V_{\\text{in}} $**. Each transistor can operate in one of three regions:\n\n| Region       | Condition (for NMOS) | Condition (for PMOS) |\n|--------------|----------------------|----------------------|\n| **Cutoff**   | $ V_{GS} < V_{thn} $ | $ V_{SG} < |V_{thp}| $ |\n| **Linear**   | $ V_{DS} < V_{GS} - V_{thn} $ | $ V_{SD} < V_{SG} - |V_{thp}| $ |\n| **Saturation** | $ V_{DS} \\geq V_{GS} - V_{thn} $ | $ V_{SD} \\geq V_{SG} - |V_{thp}| $ |\n\nWhere:\n- $ V_{GS} = V_G - V_S $\n- $ V_{SG} = V_S - V_G $\n- $ V_{DS} = V_D - V_S $\n- $ V_{SD} = V_S - V_D $\n\nFor this circuit:\n- **M₁ (PMOS)**:\n  - $ V_{SG} = V_{DD} - V_{b2} $\n  - $ V_{SD} = V_{DD} - V_{\\text{out}} $\n- **M₂ (NMOS)**:\n  - $ V_{GS} = V_{\\text{in}} - V_{b1} $\n  - $ V_{DS} = V_{\\text{out}} - V_{b1} $\n\n---\n\n---\n\n### **🔹 DC Analysis (Assuming Saturation)**\nIf both transistors are in **saturation**, the drain currents are independent of $ V_{\\text{out}} $ and depend only on gate-source voltages.\n\n#### **Current Equations**\nUsing the **square-law model** for saturation:\n\n- **For M₁ (PMOS)**:\n  $$\n  I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{SG} - |V_{thp}|)^2 = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{DD} - V_{b2} - |V_{thp}|)^2\n  $$\n\n- **For M₂ (NMOS)**:\n  $$\n  I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{GS} - V_{thn})^2 = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{\\text{in}} - V_{b1} - V_{thn})^2\n  $$\n\nSince $ I_{D1} = I_{D2} $, equating the two gives:\n$$\n\\mu_p \\left( \\frac{W}{L} \\right)_1 (V_{DD} - V_{b2} - |V_{thp}|)^2 = \\mu_n \\left( \\frac{W}{L} \\right)_2 (V_{\\text{in}} - V_{b1} - V_{thn})^2\n$$\n\nSolving for $ V_{\\text{in}} $:\n$$\nV_{\\text{in}} = V_{b1} + V_{thn} + \\sqrt{ \\frac{\\mu_p (W/L)_1}{\\mu_n (W/L)_2} } (V_{DD} - V_{b2} - |V_{thp}|)\n$$\n\nThis equation defines the **input voltage required** to maintain current equality, assuming both transistors are in saturation.\n\n---\n\n### **🔹 Output Voltage $ V_{\\text{out}} $**\nThe output voltage $ V_{\\text{out}} $ is determined by the **voltage drop across both transistors** under current continuity. In saturation, the current is fixed by the gate-source voltages, so $ V_{\\text{out}} $ adjusts to satisfy the **voltage constraints** of both transistors.\n\n#### **Constraints on $ V_{\\text{out}} $**\n- **For M₁ (PMOS)**:\n  $$\n  V_{\\text{out}} \\leq V_{b2} + |V_{thp}| \\quad \\text{(to remain in saturation)}\n  $$\n- **For M₂ (NMOS)**:\n  $$\n  V_{\\text{out}} \\geq V_{\\text{in}} - V_{thn} \\quad \\text{(to remain in saturation)}\n  $$\n\nThus, for both transistors to stay in saturation:\n$$\nV_{\\text{in}} - V_{thn} \\leq V_{\\text{out}} \\leq V_{b2} + |V_{thp}|\n$$\n\nIf $ V_{\\text{in}} $ increases, $ V_{\\text{out}} $ rises until one transistor exits saturation.\n\n---\n\n---\n\n### **🔹 Special Cases**\n1. **If $ V_{b1} = 0 $ and $ V_{b2} = V_{DD} $**:\n   - M₂ becomes a standard NMOS with source grounded.\n   - M₁ becomes a PMOS with gate at $ V_{DD} $, which may be in cutoff or linear region.\n   - This resembles a **CMOS inverter**, but with non-standard biasing.\n\n2. **If $ V_{b2} = V_{\\text{out}} $ (Feedback)**:\n   - This would create a **source follower** configuration for M₁, but it is not explicitly shown in the diagram.\n\n3. **If $ V_{b1} $ and $ V_{b2} $ are set to bias both transistors in saturation**:\n   - The circuit acts as a **voltage-controlled current source**, where $ V_{\\text{in}} $ controls the current through M₂, and $ V_{\\text{out}} $ adjusts to maintain current equality.\n\n---\n\n---\n\n### **🔹 Small-Signal Analysis (Optional)**\nFor small-signal behavior (e.g., gain, impedance), the **transconductance** of each transistor must be considered. However, since the question asks for a general analysis, the DC behavior is the primary focus.\n\n- **Transconductance of M₂**: $ g_{m2} = \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{GS} - V_{thn}) $\n- **Transconductance of M₁**: $ g_{m1} = \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{SG} - |V_{thp}|) $\n\nThe **small-signal voltage gain** from $ V_{\\text{in}} $ to $ V_{\\text{out}} $ depends on the **output impedance** of the transistors and the load, but this requires additional assumptions (e.g., no load, or specific bias conditions).\n\n---\n\n---\n\n### **🔹 Summary of Key Points**\n| Aspect | Description |\n|--------|-------------|\n| **Circuit Type** | Complementary push-pull pair (PMOS + NMOS) |\n| **Current Continuity** | $ I_{M1} = I_{M2} $ |\n| **Saturation Condition** | $ V_{\\text{in}} - V_{thn} \\leq V_{\\text{out}} \\leq V_{b2} + |V_{thp}| $ |\n| **DC Relationship** | $ V_{\\text{in}} = V_{b1} + V_{thn} + \\sqrt{ \\frac{\\mu_p (W/L)_1}{\\mu_n (W/L)_2} } (V_{DD} - V_{b2} - |V_{thp}|) $ |\n| **Operating Region** | Depends on $ V_{b1}, V_{b2}, V_{\\text{in}} $; can be cutoff, linear, or saturation |\n| **Functionality** | Acts as a **voltage-controlled current source** or **level shifter**, depending on biasing |\n\n---\n\n---\n\n### **🔚 Conclusion**\nThis circuit is a **complementary MOSFET pair** with separate bias voltages at the gate of the PMOS ($ V_{b2} $) and the source of the NMOS ($ V_{b1} $). The output voltage $ V_{\\text{out}} $ is determined by the **balance of currents** through both transistors, with the exact value depending on the **operating region** (cutoff, linear, or saturation). The relationship between $ V_{\\text{in}} $ and $ V_{\\text{out}} $ is nonlinear and governed by the square-law model of MOSFETs in saturation. Proper biasing ($ V_{b1}, V_{b2} $) is critical to ensure both transistors operate in the desired region for the intended application (e.g., buffering, level shifting, or current mirroring).",
        "format": "markdown",
        "sha256": "c17a54a775e18745ddc0739d32bdea6f5a75aa82495963d408d70221eb47686d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and Vb1 at its source, reversing the actual common-gate connection. This misses the essential topology and gain mechanism; the golden solution explicitly assigns 0 for this error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1368,
        "output_tokens": 8464,
        "total_tokens": 9832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1368,
        "output_tokens": 8464,
        "total_tokens": 9832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6220,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **common-source amplifier with an active PMOS load**, a fundamental configuration in analog CMOS design. Here's a detailed analysis:\n\n---\n\n### **1. Circuit Identification & Topology**\n- **M₂ (NMOS)**: Input transistor (common-source stage).\n  - Gate: Input voltage $ V_{\\text{in}} $\n  - Source: Biased at $ V_{b1} $\n  - Drain: Output node $ V_{\\text{out}} $\n- **M₁ (PMOS)**: Active load.\n  - Source: Connected to $ V_{DD} $\n  - Gate: Biased at $ V_{b2} $\n  - Drain: Connected to $ V_{\\text{out}} $\n\nThis is a **single-ended common-source amplifier** with a **PMOS active load** (instead of a passive resistor). The active load improves gain and reduces power consumption compared to resistive loads.\n\n---\n\n### **2. DC Operating Point Analysis**\nBoth transistors must operate in **saturation** for linear amplification. Key conditions:\n\n#### **For M₂ (NMOS):**\n- **Gate-Source Voltage**:  \n  $ V_{GS2} = V_{\\text{in}} - V_{b1} > V_{TH,n} $ (threshold voltage for NMOS).\n- **Drain-Source Voltage**:  \n  $ V_{DS2} = V_{\\text{out}} - V_{b1} > V_{GS2} - V_{TH,n} $.\n\n#### **For M₁ (PMOS):**\n- **Source-Gate Voltage**:  \n  $ V_{SG1} = V_{DD} - V_{b2} > |V_{TH,p}| $ (magnitude of PMOS threshold).\n- **Source-Drain Voltage**:  \n  $ V_{SD1} = V_{DD} - V_{\\text{out}} > V_{SG1} - |V_{TH,p}| $.\n\n#### **DC Current Matching:**\nThe drain currents of M₁ and M₂ are equal (series connection):\n$$\nI_D = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{GS2} - V_{TH,n})^2 = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{SG1} - |V_{TH,p}|)^2\n$$\n- **Purpose of $ V_{b1} $ and $ V_{b2} $**:  \n  These bias voltages set the DC operating point to ensure both transistors are in saturation and the desired $ I_D $ flows. For example:\n  - $ V_{b1} $ adjusts $ V_{GS2} $ for M₂.\n  - $ V_{b2} $ adjusts $ V_{SG1} $ for M₁.\n\n---\n\n### **3. Small-Signal Analysis**\nAssume:\n- $ V_{b1} $ and $ V_{b2} $ are **DC biases** (AC ground).\n- Transistors are in saturation.\n\n#### **Small-Signal Model:**\n- **M₂ (NMOS)**:\n  - Transconductance: $ g_{m2} = \\sqrt{2 \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 I_D} $\n  - Output resistance: $ r_{o2} = \\frac{1}{\\lambda_2 I_D} $ (channel-length modulation parameter $ \\lambda_2 $).\n- **M₁ (PMOS)**:\n  - Transconductance: $ g_{m1} = \\sqrt{2 \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 I_D} $\n  - Output resistance: $ r_{o1} = \\frac{1}{\\lambda_1 I_D} $.\n\n#### **Voltage Gain:**\nThe small-signal voltage gain $ A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} $ is derived from KCL at the output node:\n$$\nA_v = -g_{m2} \\cdot (r_{o1} \\parallel r_{o2})\n$$\n- **Interpretation**:\n  - The negative sign indicates **inversion** (180° phase shift).\n  - Gain magnitude depends on $ g_{m2} $ and the parallel output resistance $ r_{o1} \\parallel r_{o2} $.\n  - If channel-length modulation is negligible ($ \\lambda \\to 0 $), $ r_{o1}, r_{o2} \\to \\infty $, and the gain becomes **infinite** (ideal case). In practice, finite $ \\lambda $ limits the gain.\n\n#### **Input/Output Impedance:**\n- **Input Impedance**: Very high (gate of M₂ is a MOSFET gate, $ Z_{\\text{in}} \\approx \\infty $).\n- **Output Impedance**: $ Z_{\\text{out}} = r_{o1} \\parallel r_{o2} $ (moderate to high).\n\n---\n\n### **4. Output Swing Limitations**\nThe output voltage $ V_{\\text{out}} $ is constrained by saturation conditions:\n- **Maximum $ V_{\\text{out}} $**:  \n  $ V_{\\text{out}} \\leq V_{DD} - |V_{TH,p}| $ (to keep M₁ in saturation).\n- **Minimum $ V_{\\text{out}} $**:  \n  $ V_{\\text{out}} \\geq V_{b1} + V_{TH,n} $ (to keep M₂ in saturation).\n\n**Example**: If $ V_{b1} = 0 $ (source grounded), the minimum $ V_{\\text{out}} $ is $ V_{TH,n} $. The swing is limited by $ V_{DD} - |V_{TH,p}| - (V_{b1} + V_{TH,n}) $.\n\n---\n\n### **5. Key Observations**\n1. **Biasing**:  \n   - $ V_{b1} $ and $ V_{b2} $ must be chosen to ensure both transistors are in saturation for the expected $ V_{\\text{in}} $ range.\n   - In practice, $ V_{b1} $ might be tied to ground (if not explicitly labeled), but the diagram shows it as a separate node.\n\n2. **Gain Trade-offs**:  \n   - Higher $ g_{m2} $ (via larger $ W/L $ or $ I_D $) increases gain.\n   - Larger $ r_{o1}, r_{o2} $ (via longer channel lengths or smaller $ \\lambda $) also increases gain.\n\n3. **Applications**:  \n   - Used in **low-power analog circuits** (e.g., op-amps, RF amplifiers).\n   - Active load (M₁) replaces resistive loads to save area and improve performance.\n\n---\n\n### **6. Summary of Results**\n| **Parameter**       | **Expression**                          | **Notes**                                  |\n|----------------------|------------------------------------------|--------------------------------------------|\n| **DC Current**       | $ I_D = \\frac{1}{2} \\mu C_{ox} (W/L) (V_{GS} - V_{TH})^2 $ | Must match for M₁ and M₂. |\n| **Voltage Gain**     | $ A_v = -g_{m2} \\cdot (r_{o1} \\parallel r_{o2}) $ | Negative sign = phase inversion. |\n| **Input Impedance**  | $ \\approx \\infty $                     | Gate of M₂.                              |\n| **Output Impedance** | $ r_{o1} \\parallel r_{o2} $             | Depends on channel-length modulation.     |\n| **Output Swing**     | $ V_{b1} + V_{TH,n} \\leq V_{\\text{out}} \\leq V_{DD} - |V_{TH,p}| $ | Limited by saturation. |\n\n---\n\n### **Conclusion**\nThis circuit is a **common-source amplifier with a PMOS active load**, offering high gain, high input impedance, and efficient power usage. The bias voltages $ V_{b1} $ and $ V_{b2} $ are critical for setting the DC operating point, while the small-signal gain is determined by the transconductance of M₂ and the output resistances of both transistors. Proper design ensures saturation across the desired input/output range.",
        "format": "markdown",
        "sha256": "04dc744cb7757bffb0b596a3a14b26e3fe0f725d87e095992f8be1dff84714cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, contradicting the circuit’s common-gate topology, where Vin is applied at M2’s source. It consequently gives the wrong gain polarity and input resistance; the golden solution explicitly assigns 0 for this topology error.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1368,
        "output_tokens": 9585,
        "total_tokens": 10953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7766,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1368,
        "output_tokens": 9585,
        "total_tokens": 10953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7766,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure is a **common-source amplifier with an active load**, formed by two MOSFETs:  \n- **$ M_1 $**: A **p-channel MOSFET (PMOS)** with its **source connected to $ V_{DD} $**, **gate biased at $ V_{b2} $**, and **drain connected to $ V_{\\text{out}} $**.  \n- **$ M_2 $**: An **n-channel MOSFET (NMOS)** with its **source connected to $ V_{b1} $**, **gate driven by $ V_{\\text{in}} $**, and **drain connected to $ V_{\\text{out}} $**.  \n\n---\n\n---\n\n### **1. Circuit Configuration & Role of Transistors**\n- **$ M_2 $** acts as the **input transistor** (common-source configuration).  \n  - Its gate ($ V_{\\text{in}} $) receives the input signal.  \n  - Its source ($ V_{b1} $) is a **DC bias voltage**, ensuring proper operation (e.g., setting the threshold for saturation).  \n- **$ M_1 $** acts as the **active load** for $ M_2 $.  \n  - Its gate ($ V_{b2} $) is a **DC bias voltage** that sets the current through $ M_1 $.  \n  - It replaces a passive resistor, providing a **high-impedance load** (critical for high gain).  \n\nThis structure is a **single-stage amplifier** commonly used in analog IC design (e.g., in operational amplifiers or sense amplifiers).\n\n---\n\n---\n\n### **2. DC Operating Point Analysis**\nFor both transistors to operate in **saturation** (required for linear amplification):  \n\n#### **For $ M_2 $ (NMOS):**\n- **Gate-source voltage**: $ V_{GS2} = V_{\\text{in}} - V_{b1} $  \n  Must satisfy: $ V_{GS2} > V_{th,n} $ (where $ V_{th,n} > 0 $ is the NMOS threshold voltage).  \n- **Drain-source voltage**: $ V_{DS2} = V_{\\text{out}} - V_{b1} $  \n  Must satisfy: $ V_{DS2} \\geq V_{GS2} - V_{th,n} $.  \n\n#### **For $ M_1 $ (PMOS):**\n- **Gate-source voltage**: $ V_{SG1} = V_{DD} - V_{b2} $  \n  Must satisfy: $ V_{SG1} > |V_{th,p}| $ (where $ V_{th,p} < 0 $ is the PMOS threshold voltage).  \n- **Drain-source voltage**: $ V_{SD1} = V_{DD} - V_{\\text{out}} $  \n  Must satisfy: $ V_{SD1} \\geq V_{SG1} - |V_{th,p}| $.  \n\n#### **Current Matching:**\nSince $ M_1 $ and $ M_2 $ share the same drain node ($ V_{\\text{out}} $), their **drain currents are equal** in DC:  \n$$\nI_{D1} = I_{D2}\n$$  \nFor **saturation region**, the drain current equations are:  \n- $ M_2 $ (NMOS):  \n  $$\n  I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{\\text{in}} - V_{b1} - V_{th,n})^2\n  $$  \n- $ M_1 $ (PMOS):  \n  $$\n  I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{DD} - V_{b2} - |V_{th,p}|)^2\n  $$  \nEquating $ I_{D1} = I_{D2} $ gives the **DC relationship between $ V_{\\text{in}} $, $ V_{b1} $, and $ V_{b2} $**.  \n- **Bias voltages $ V_{b1} $ and $ V_{b2} $** must be chosen to ensure **both transistors are in saturation** and the circuit operates linearly.\n\n---\n\n---\n\n### **3. Small-Signal Analysis**\nAssuming **small-signal operation** (AC signals superimposed on DC biases):  \n\n#### **Key Assumptions:**\n- $ V_{b1} $ and $ V_{b2} $ are **DC biases** → **AC ground**.  \n- $ V_{DD} $ is a **DC supply** → **AC ground**.  \n\n#### **Small-Signal Model:**\n- **$ M_2 $ (NMOS)**:  \n  - Acts as a **common-source amplifier**.  \n  - Small-signal current: $ i_{d2} = g_{m2} v_{\\text{in}} $ (where $ g_{m2} $ is the transconductance of $ M_2 $).  \n- **$ M_1 $ (PMOS)**:  \n  - Gate and source are **AC-grounded** → **no small-signal $ v_{GS} $**.  \n  - Acts as a **current source** with **output resistance $ r_{ds1} $**.  \n\n#### **Output Voltage ($ v_{\\text{out}} $):**\nThe small-signal current $ i_{d2} $ flows through the **parallel combination of $ r_{ds1} $ and $ r_{ds2} $** (output resistances of $ M_1 $ and $ M_2 $):  \n$$\nv_{\\text{out}} = -i_{d2} \\cdot (r_{ds1} \\parallel r_{ds2}) = -g_{m2} v_{\\text{in}} \\cdot (r_{ds1} \\parallel r_{ds2})\n$$  \nThus, the **small-signal voltage gain** is:  \n$$\nA_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = -g_{m2} \\cdot (r_{ds1} \\parallel r_{ds2})\n$$  \n\n#### **Simplified Gain (if $ r_{ds1}, r_{ds2} \\gg 1/g_{m1} $):**\nIn many cases, $ r_{ds} \\approx 1/(\\lambda I_D) $ (where $ \\lambda $ is the channel-length modulation parameter). If $ \\lambda $ is small, $ r_{ds} $ is large, and the gain simplifies to:  \n$$\nA_v \\approx -\\frac{g_{m2}}{g_{m1}}\n$$  \nwhere $ g_{m1} $ is the transconductance of $ M_1 $. This is a **key result** for active-load amplifiers.\n\n---\n\n---\n\n### **4. Key Characteristics**\n| **Parameter**       | **Value**                          | **Notes**                                                                 |\n|----------------------|------------------------------------|---------------------------------------------------------------------------|\n| **Input Impedance**  | Very high (gate of $ M_2 $)        | Ideal for high-impedance signal sources.                                |\n| **Output Impedance** | $ r_{ds1} \\parallel r_{ds2} $    | Typically high (hundreds of kΩ to MΩ).                                   |\n| **Voltage Gain**     | $ -g_{m2} (r_{ds1} \\parallel r_{ds2}) $ | High gain if $ r_{ds} $ is large (e.g., $ A_v \\approx -10 $ to $ -100 $). |\n| **Operating Region** | Saturation for both transistors    | Ensures linear amplification.                                           |\n\n---\n\n---\n\n### **5. Practical Considerations**\n- **Biasing**: $ V_{b1} $ and $ V_{b2} $ must be carefully chosen to:  \n  - Keep both transistors in **saturation** for all expected $ V_{\\text{in}} $.  \n  - Avoid **triode region** (which reduces gain and linearity).  \n- **Matching**: For predictable gain, $ M_1 $ and $ M_2 $ may be **sized** (W/L ratios) to balance $ g_{m1} $ and $ g_{m2} $.  \n- **Frequency Response**: Limited by **parasitic capacitances** (e.g., $ C_{gs} $, $ C_{gd} $) and $ r_{ds} $.  \n\n---\n\n---\n\n### **6. Summary**\nThis circuit is a **common-source amplifier with a PMOS active load**, where:  \n- $ M_2 $ (NMOS) is the **input transistor**.  \n- $ M_1 $ (PMOS) acts as a **high-impedance active load**.  \n- **DC biases $ V_{b1} $ and $ V_{b2} $** set the operating point.  \n- **Small-signal gain** is $ A_v = -g_{m2} (r_{ds1} \\parallel r_{ds2}) \\approx -g_{m2}/g_{m1} $.  \n- **High input impedance** and **high output impedance** make it suitable for analog signal processing.  \n\nThis configuration is **fundamental in analog IC design**, often used as a building block in operational amplifiers, comparators, and other precision circuits.",
        "format": "markdown",
        "sha256": "37100d47098dfd9edf3b62120df6007c6a510edb4df17630318ac4896fb19554"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, contradicting the essential common-gate topology where Vin is applied at M2’s source. The resulting gain polarity and input-impedance claims are therefore also wrong.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1368,
        "output_tokens": 7403,
        "total_tokens": 8771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5348,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1368,
        "output_tokens": 7403,
        "total_tokens": 8771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5348,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to analyze the small-signal model and identify the independent energy storage elements, which are the capacitors in this case. The circuit consists of two MOSFETs, M1 and M2, with various capacitances associated with each MOSFET.\n\nThe capacitors in the circuit are:\n- C_GS: Gate-source capacitance of M1.\n- C_GD: Gate-drain capacitance of M1.\n- C_GD2: Gate-drain capacitance of M2.\n- C_DB: Drain-bulk capacitance of M1.\n- C_DB2: Drain-bulk capacitance of M2.\n\nIn the small-signal model, the circuit can be simplified to two independent nodes: the gate of M1 (V_g) and the drain node (V_d) where M1 and M2 meet. The capacitors C_GS, C_GD, C_GD2, and C_DB are connected between these nodes and ground, while C_DB2 is connected between the battery and the source of M2, which is considered AC ground.\n\nThe key insight is that the number of poles in a circuit is determined by the number of independent energy storage elements. In this case, the independent nodes are V_g and V_d, and the capacitors connected to these nodes form the energy storage elements. The capacitors C_GS and C_GD are connected to V_g, and C_GD2 and C_DB are connected to V_d. The coupling capacitor C_GD between V_g and V_d does not add an additional pole but rather couples the two nodes.\n\nTherefore, the circuit has two independent nodes, each contributing a pole. The total number of poles is determined by the number of independent nodes with capacitors to ground, which is two.\n\nThus, the circuit has two poles.",
        "format": "markdown",
        "sha256": "a91687369104a991ef60ba4473bb4665b9fbb183834225a9c69c6f8697b2dd4c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes there are two poles and identifies the gate of M1 and output as the two nodes. However, it misplaces CDB2: it is connected from the output to AC ground, not between the battery and M2’s source.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1947,
        "output_tokens": 12998,
        "total_tokens": 14945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1947,
        "output_tokens": 12998,
        "total_tokens": 14945,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to identify the number of independent reactive elements, specifically capacitors, as inductors are not present in the circuit. Each capacitor in the small-signal model of the circuit contributes to a pole in the frequency response.\n\nThe circuit consists of two transistors, M1 and M2, with the following capacitors:\n\n- \\( C_{GS} \\): Gate-source capacitance of M1.\n- \\( C_{GD} \\): Gate-drain capacitance of M1.\n- \\( C_{GD2} \\): Gate-drain capacitance of M2.\n- \\( C_{DB} \\): Drain-bulk capacitance of M1.\n- \\( C_{DB2} \\): Drain-bulk capacitance of M2.\n\nEach of these capacitors is an independent reactive element in the small-signal model of the circuit. Therefore, the total number of poles in the circuit is equal to the number of these capacitors.\n\nSince there are five capacitors in the circuit, the circuit has five poles.",
        "format": "markdown",
        "sha256": "c3026bf2ceddc75650d4217842699c199cff44f9486c1e910f03b9b01bf2a02d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not five: the capacitors do not each create an independent pole. The answer lists relevant capacitances but misses that only the gate and output are independent dynamic nodes.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1947,
        "output_tokens": 3597,
        "total_tokens": 5544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1947,
        "output_tokens": 3597,
        "total_tokens": 5544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3385,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the given circuit, we need to understand the concept of poles in circuit analysis. A pole is a frequency at which the transfer function of the circuit goes to infinity, and in the context of AC analysis, poles are related to the time constants in the circuit, which are determined by the capacitors.\n\nThe circuit in question is a two-stage amplifier with MOSFETs M1 and M2. The circuit includes several capacitors:\n\n- \\( C_{GS} \\): Gate-source capacitance of M1.\n- \\( C_{GD} \\): Gate-drain capacitance of M1.\n- \\( C_{GD2} \\): Gate-drain capacitance of M2.\n- \\( C_{DB} \\): Drain-bulk capacitance of M1.\n- \\( C_{DB2} \\): Drain-bulk capacitance of M2.\n\nEach of these capacitors is connected in a way that they form independent time constants in the circuit. In linear circuit theory, the number of poles is equal to the number of independent energy storage elements, which in this case are the capacitors.\n\nGiven that the circuit explicitly shows five capacitors, and each capacitor can contribute a pole if it forms a separate time constant, the total number of poles in the circuit is determined by the number of these independent capacitors.\n\nTherefore, the number of poles in the circuit is:\n\n\\[\n\\boxed{5}\n\\]",
        "format": "markdown",
        "sha256": "bf5cb3ebc9cc911491f11d5ef3e206682e79354a8336ec2b218cfde388aa262a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer identifies several capacitors but incorrectly counts each as an independent pole. The capacitors connect to only two independent dynamic nodes, so the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1947,
        "output_tokens": 7181,
        "total_tokens": 9128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1947,
        "output_tokens": 7181,
        "total_tokens": 9128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6896,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **common-source amplifier with an active load**, a fundamental configuration in CMOS analog design. Here’s a detailed analysis:\n\n---\n\n### **🔍 Circuit Configuration**\n- **M₁ (NMOS)**: Input transistor  \n  - **Source**: Grounded  \n  - **Gate**: Connected to input voltage $ V_{\\text{in}} $  \n  - **Drain**: Connected to output node $ V_{\\text{out}} $  \n- **M₂ (PMOS)**: Diode-connected active load  \n  - **Source**: Connected to $ V_{DD} $  \n  - **Gate & Drain**: Short-circuited (diode-connected), both tied to $ V_{\\text{out}} $  \n- **Resistor $ R_D $**: Connected between $ V_{DD} $ and $ V_{\\text{out}} $  \n\n> **Key Insight**:  \n> The **diode-connected PMOS (M₂)** acts as a **current source** for the drain of M₁, replacing a passive resistor load. This configuration maximizes gain and improves linearity compared to a resistive load.\n\n---\n\n---\n\n## **⚡ DC Operating Point Analysis**\n\n### **1. Current Through M₂ (Active Load)**\nSince M₂ is **diode-connected**, it operates in **saturation** (assuming $ V_{DD} > |V_{th,p}| $).  \nThe drain current of M₂ is:\n$$\nI_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{SG2} - |V_{th,p}|)^2\n$$\nwhere:\n- $ V_{SG2} = V_{DD} - V_{\\text{out}} $ (since $ V_{SG} = V_S - V_G = V_{DD} - V_{\\text{out}} $ for PMOS),\n- $ \\mu_p $: Mobility of holes,\n- $ C_{ox} $: Oxide capacitance,\n- $ (W/L)_2 $: Aspect ratio of M₂,\n- $ V_{th,p} $: Threshold voltage of PMOS (negative value).\n\n### **2. Current Through M₁ (Input Transistor)**\nM₁ (NMOS) also operates in **saturation** (for normal operation), with:\n$$\nI_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{GS1} - V_{th,n})^2\n$$\nwhere:\n- $ V_{GS1} = V_{\\text{in}} $,\n- $ V_{th,n} $: Threshold voltage of NMOS.\n\n### **3. Current Through Resistor $ R_D $**\nThe resistor $ R_D $ carries current:\n$$\nI_{R_D} = \\frac{V_{DD} - V_{\\text{out}}}{R_D}\n$$\n\n### **4. Node Current Balance at $ V_{\\text{out}} $**\nAt the output node $ V_{\\text{out}} $, **KCL** applies:\n$$\nI_{D1} = I_{R_D} + I_{D2}\n$$\nSubstituting the expressions:\n$$\n\\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{\\text{in}} - V_{th,n})^2 = \\frac{V_{DD} - V_{\\text{out}}}{R_D} + \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{DD} - V_{\\text{out}} - |V_{th,p}|)^2\n$$\n\nThis nonlinear equation determines the **DC operating point** $ V_{\\text{out}} $ as a function of $ V_{\\text{in}} $. In practice, this is solved numerically or via SPICE simulation.\n\n---\n\n---\n\n## **📈 Small-Signal Analysis**\n\n### **1. Small-Signal Model**\n- **M₁ (NMOS)**:  \n  - Transconductance: $ g_{m1} = \\sqrt{2 \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 I_{D1}} $  \n  - Output resistance: $ r_{o1} = \\frac{1}{\\lambda_1 I_{D1}} $ (where $ \\lambda $ is the channel-length modulation parameter)  \n- **M₂ (PMOS, Diode-Connected)**:  \n  - Small-signal resistance: $ r_{o2} \\parallel \\frac{1}{g_{m2}} $  \n    (For a diode-connected transistor, the small-signal resistance is dominated by $ \\frac{1}{g_{m2}} $)  \n  - Transconductance: $ g_{m2} = \\sqrt{2 \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2 I_{D2}} $  \n\n### **2. Equivalent Load Resistance**\nThe total load seen by M₁ is the **parallel combination** of:\n- Resistor $ R_D $,\n- Output resistance of M₂: $ r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}} $ (since $ g_{m2} \\gg 1/r_{o2} $ in strong inversion).\n\nThus:\n$$\nR_{\\text{load}} = R_D \\parallel \\frac{1}{g_{m2}}\n$$\n\n### **3. Voltage Gain**\nThe small-signal voltage gain is:\n$$\nA_v = -g_{m1} \\cdot (r_{o1} \\parallel R_{\\text{load}})\n$$\nIf $ R_D $ is **not present** (i.e., $ R_D \\to \\infty $), the gain simplifies to:\n$$\nA_v \\approx -g_{m1} \\cdot \\frac{1}{g_{m2}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}} \\cdot \\frac{V_{\\text{in}} - V_{th,n}}{V_{DD} - V_{\\text{out}} - |V_{th,p}|}\n$$\nThis is typically **high** (e.g., 10–100) due to the active load.\n\n> **Note**: The presence of $ R_D $ **reduces the gain** because it shunts the output node, lowering the effective load resistance.\n\n---\n\n---\n\n## **🔄 Key Observations**\n| **Parameter**       | **Effect of $ R_D $** | **Effect of M₂ (Active Load)** |\n|----------------------|------------------------|--------------------------------|\n| **DC Bias**          | Shifts $ V_{\\text{out}} $ | Sets bias current $ I_{D} $ |\n| **Gain**             | Reduces gain           | Increases gain (high $ g_{m2} $) |\n| **Output Resistance**| Lowers $ R_{\\text{out}} $ | Increases $ R_{\\text{out}} $ (due to $ 1/g_{m2} $) |\n| **Linearity**        | Improves (if $ R_D $ is large) | Better than resistive load |\n\n---\n\n---\n\n## **📌 Summary**\n- **Circuit Type**: Common-source amplifier with **active load (M₂)** and **resistive load ($ R_D $)**.\n- **Purpose**: Amplifies small-signal input $ V_{\\text{in}} $ with high gain (if $ R_D $ is negligible).\n- **Advantages of Active Load (M₂)**:\n  - Higher gain (no voltage drop across a resistor).\n  - Better power efficiency (no static power dissipation in $ R_D $).\n  - Improved linearity and bandwidth.\n- **Role of $ R_D $**:\n  - Provides **DC biasing** for the output node.\n  - **Reduces gain** due to parallel loading.\n  - Can be omitted in pure active-load designs (where M₂ alone sets the bias).\n\n---\n\n### **💡 Practical Notes**\n- If $ R_D $ is **not intended** (e.g., a design error), the circuit is a **pure active-load common-source amplifier** with gain $ A_v \\approx -g_{m1}/g_{m2} $.\n- For **maximum gain**, ensure:\n  - $ (W/L)_1 \\gg (W/L)_2 $ (to maximize $ g_{m1}/g_{m2} $),\n  - $ R_D \\to \\infty $ (remove resistor),\n  - M₂ is **diode-connected** to set a stable bias current.\n\n---\n**Final Answer**:  \nThis is a **common-source amplifier with an active load (M₂) and a resistive load ($ R_D $)**. The active load (diode-connected PMOS) provides high gain, while $ R_D $ ensures DC biasing but reduces gain. The voltage gain is approximately $ A_v \\approx -g_{m1} \\cdot (R_D \\parallel 1/g_{m2}) $. For optimal performance, $ R_D $ is often omitted in pure active-load designs.",
        "format": "markdown",
        "sha256": "aea7681bf65441e32c7a38684f1ead5d379b1b83e91f3e6a203c5b53d7c78f71"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as an NMOS common-source stage with a diode-connected PMOS load. The figure instead has two series NMOS devices with tied gates; it misses the key result that they act approximately like one transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 10917,
        "total_tokens": 12481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 10917,
        "total_tokens": 12481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown in the figure is a **CMOS-like amplifier/inverter with a series resistor (R<sub>D</sub>)**. Here's a detailed analysis:\n\n---\n\n### **🔹 Circuit Configuration**\n- **Transistors**:\n  - **M<sub>1</sub>**: NMOS (source connected to **ground**, drain connected to the source of M<sub>2</sub>).\n  - **M<sub>2</sub>**: PMOS (drain connected to **R<sub>D</sub>** and **V<sub>out</sub>**, source connected to M<sub>1</sub>’s drain).\n- **Resistor**: R<sub>D</sub> connects **V<sub>DD</sub>** to the drain of M<sub>2</sub>.\n- **Input**: V<sub>in</sub> drives the gates of **both M<sub>1</sub> and M<sub>2</sub>**.\n- **Output**: V<sub>out</sub> is taken at the node between **R<sub>D</sub>** and M<sub>2</sub>’s drain.\n\nThis resembles a **standard CMOS inverter** but with **R<sub>D</sub> inserted in series with the PMOS (M<sub>2</sub>)**. Unlike a pure CMOS inverter (where the output is the common drain node of M<sub>1</sub> and M<sub>2</sub>), here **V<sub>out</sub> is *before* M<sub>2</sub>’s drain**, introducing a voltage drop across R<sub>D</sub>.\n\n---\n\n---\n\n### **🔹 Operating Principle**\n#### **1. When V<sub>in</sub> = 0 (Low)**\n- **M<sub>1</sub> (NMOS)**: Off (V<sub>GS1</sub> = 0 < V<sub>th,n</sub>).\n- **M<sub>2</sub> (PMOS)**: On (V<sub>GS2</sub> = V<sub>in</sub> − V<sub>DD</sub> = −V<sub>DD</sub> < V<sub>th,p</sub>).\n  - However, **M<sub>1</sub> is off**, so **no current flows** through M<sub>2</sub> → **I<sub>D</sub> = 0**.\n  - **V<sub>out</sub> = V<sub>DD</sub>** (no drop across R<sub>D</sub>).\n\n#### **2. When V<sub>in</sub> = V<sub>DD</sub> (High)**\n- **M<sub>1</sub> (NMOS)**: On (V<sub>GS1</sub> = V<sub>DD</sub> > V<sub>th,n</sub>).\n- **M<sub>2</sub> (PMOS)**: Off (V<sub>GS2</sub> = V<sub>DD</sub> − V<sub>DD</sub> = 0 > V<sub>th,p</sub>).\n  - **M<sub>2</sub> is off**, so **no current flows** through R<sub>D</sub> → **V<sub>out</sub> = V<sub>DD</sub>** (again, no drop).\n\n⚠️ **Problem**: If both transistors are off or on in a way that blocks current, **V<sub>out</sub> remains at V<sub>DD</sub>** for all V<sub>in</sub>. This suggests **M<sub>2</sub> is *not* a PMOS** in this configuration.\n\n---\n\n### **🔹 Corrected Transistor Types**\nThe circuit **only makes sense if both M<sub>1</sub> and M<sub>2</sub> are NMOS** (not CMOS). This is a **series-connected NMOS pair** with a pull-up resistor R<sub>D</sub>.\n\n#### **Revised Configuration**:\n- **M<sub>1</sub>**: NMOS (source → ground, drain → X).\n- **M<sub>2</sub>**: NMOS (drain → V<sub>out</sub>, source → X).\n- **R<sub>D</sub>**: Pull-up resistor from V<sub>DD</sub> to V<sub>out</sub>.\n- **Gates of M<sub>1</sub> and M<sub>2</sub>**: Tied to V<sub>in</sub>.\n\nThis forms a **voltage-controlled resistor network** where:\n- **V<sub>out</sub> = V<sub>DD</sub> − I<sub>D</sub> · R<sub>D</sub>**,\n- **I<sub>D</sub>** is the current through the series NMOS pair (M<sub>1</sub> and M<sub>2</sub>).\n\n---\n\n---\n\n### **🔹 Static Behavior (DC Analysis)**\n#### **Case 1: V<sub>in</sub> < V<sub>th</sub> (Both NMOS Off)**\n- **I<sub>D</sub> = 0** → **V<sub>out</sub> = V<sub>DD</sub>**.\n\n#### **Case 2: V<sub>in</sub> > V<sub>th</sub> (Both NMOS On)**\n- **M<sub>1</sub> and M<sub>2</sub> enter triode/saturation** depending on V<sub>in</sub>.\n- **Current I<sub>D</sub>** flows from V<sub>DD</sub> → R<sub>D</sub> → M<sub>2</sub> → M<sub>1</sub> → ground.\n- **V<sub>out</sub> = V<sub>DD</sub> − I<sub>D</sub> · R<sub>D</sub>**.\n\n##### **Simplified Model (Triode Region)**\nIf both transistors operate in the **triode region** (V<sub>DS</sub> < V<sub>GS</sub> − V<sub>th</sub>), they act as **voltage-controlled resistors**:\n- **R<sub>on</sub> = 1 / [k<sub>n</sub> (V<sub>GS</sub> − V<sub>th</sub>)]**, where \\( k_n = \\mu_n C_{ox} (W/L) \\).\n- Total resistance from V<sub>out</sub> to ground: **R<sub>total</sub> = R<sub>on,M2</sub> + R<sub>on,M1</sub>**.\n- **V<sub>out</sub> = V<sub>DD</sub> · (R<sub>total</sub> / (R<sub>D</sub> + R<sub>total</sub>))**.\n\nAs **V<sub>in</sub> increases**, **R<sub>on,M1</sub> and R<sub>on,M2</sub> decrease**, so **V<sub>out</sub> decreases**. This behaves like a **voltage divider with a variable lower leg**.\n\n##### **Saturation Region (For Small V<sub>in</sub>)**\nIf V<sub>in</sub> is just above V<sub>th</sub>, M<sub>1</sub> may be in saturation:\n- **I<sub>D</sub> ≈ (1/2) k<sub>n1</sub> (V<sub>in</sub> − V<sub>th</sub>)²**.\n- **V<sub>out</sub> = V<sub>DD</sub> − I<sub>D</sub> · R<sub>D</sub>**.\n\n---\n\n---\n\n### **🔹 Dynamic Behavior (AC Analysis)**\n- **Small-signal model**:\n  - **R<sub>D</sub>** acts as a **load resistor**.\n  - The **series NMOS pair** (M<sub>1</sub> and M<sub>2</sub>) forms a **voltage-dependent resistance**.\n- **Voltage gain**:\n  - If M<sub>1</sub> is the input transistor and M<sub>2</sub> is part of the load, the gain is **negative** (inverting).\n  - Gain magnitude depends on **R<sub>D</sub>** and the **transconductance (g<sub>m</sub>)** of M<sub>1</sub>.\n\n---\n\n---\n\n### **🔹 Key Observations**\n| **V<sub>in</sub>** | **M<sub>1</sub>** | **M<sub>2</sub>** | **I<sub>D</sub>** | **V<sub>out</sub>** |\n|---------------------|-------------------|-------------------|-------------------|---------------------|\n| **0 V**             | Off               | Off               | 0                 | **V<sub>DD</sub>**  |\n| **V<sub>th</sub>**  | On (Triode)       | On (Triode)       | Small             | **~V<sub>DD</sub>** |\n| **High (V<sub>DD</sub>)** | On (Saturation) | On (Triode)       | Large             | **Low (≈ 0 V)**     |\n\n- **This circuit acts as a non-ideal inverter**:\n  - **V<sub>out</sub> ≈ V<sub>DD</sub>** when V<sub>in</sub> is low.\n  - **V<sub>out</sub> drops toward 0** as V<sub>in</sub> increases.\n  - **Output swing is limited** by R<sub>D</sub> (unlike a pure CMOS inverter, which swings rail-to-rail).\n\n---\n\n### **🔹 Applications**\n1. **Voltage Divider**: Used in analog signal processing where a **variable resistance** is controlled by V<sub>in</sub>.\n2. **Non-Ideal Inverter**: For logic circuits where full rail-to-rail swing is not critical (e.g., in mixed-signal systems).\n3. **Amplifier**: If biased properly, it can amplify small signals (though gain is limited by R<sub>D</sub>).\n\n---\n\n### **🔹 Limitations**\n- **No full rail-to-rail output**: Due to R<sub>D</sub>, V<sub>out</sub> cannot reach 0 V even when M<sub>1</sub> and M<sub>2</sub> are fully on.\n- **Power inefficiency**: Continuous current flow through R<sub>D</sub> when V<sub>in</sub> is high.\n- **Non-linear transfer function**: V<sub>out</sub> vs. V<sub>in</sub> is **non-linear** (exponential in subthreshold, quadratic in saturation).\n\n---\n\n### **🔹 Summary**\nThis circuit is a **series-connected NMOS pair with a pull-up resistor**, functioning as:\n- A **voltage-controlled resistor network** (for analog applications).\n- A **non-ideal inverter** (for digital applications with limited output swing).\n\n**Key Equation**:\n\\[\nV_{out} = V_{DD} - I_D \\cdot R_D\n\\]\nwhere \\( I_D \\) depends on \\( V_{in} \\), \\( V_{th} \\), and the transistor parameters.\n\n**Behavior**:\n- **V<sub>in</sub> ⇒ Low**: V<sub>out</sub> ≈ V<sub>DD</sub>.\n- **V<sub>in</sub> ⇒ High**: V<sub>out</sub> ≈ 0 V (but not fully due to R<sub>D</sub>).\n\nThis is **not a standard CMOS inverter** but a **resistor-loaded NMOS pair**, commonly used in early digital logic (e.g., NMOS logic families) before CMOS became dominant.",
        "format": "markdown",
        "sha256": "f2c48145c00fefa519852c61c02f3742e3e8c213cf06a60e8c1bdacabf245264"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It eventually identifies the two common-gate series NMOS devices and pull-up resistor, but misses the central result that they act approximately like one device with effective channel length L1 + L2. Its operating-region claims are also incorrect, and the initial PMOS/inverter analysis is confused.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 9931,
        "total_tokens": 11495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 9931,
        "total_tokens": 11495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7248,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure is a **common-source amplifier with an active PMOS load**, though the inclusion of resistor $ R_D $ introduces a non-standard element. Below is a structured analysis of its behavior, function, and key characteristics.\n\n---\n\n---\n\n### **🔍 Circuit Identification & Configuration**\n- **Transistors**:  \n  - $ M_1 $: **NMOS** (source grounded, arrow on source points outward).  \n  - $ M_2 $: **PMOS** (source connected to $ V_{DD} $, arrow on source points inward).  \n- **Connections**:  \n  - $ V_{in} $ drives the **gates of both $ M_1 $ and $ M_2 $**.  \n  - $ M_2 $’s **drain** connects to $ R_D $ and $ V_{out} $.  \n  - $ M_1 $’s **drain** connects to $ M_2 $’s **source**.  \n  - $ M_1 $’s **source** is grounded.  \n- **Interpretation**:  \n  This is **not a standard CMOS inverter** (which would have $ M_2 $’s source directly to $ V_{DD} $ and $ M_1 $’s drain to $ V_{out} $). Instead, $ R_D $ is in series with $ M_2 $, suggesting a **resistive load** for a **common-source stage** with $ M_1 $ as the input transistor. However, the gate of $ M_2 $ is tied to $ V_{in} $, which is atypical for an active load (which typically requires a fixed bias).  \n  **Most plausible interpretation**:  \n  The circuit is a **pseudo-NMOS inverter** with a **resistor $ R_D $** as the pull-up network and $ M_1 $ as the NMOS pull-down. However, the presence of $ M_2 $ (PMOS) complicates this. If $ M_2 $ is **intended as a current source**, its gate should be biased, not tied to $ V_{in} $. Given the diagram, we assume $ M_2 $ is **accidentally included** or misdrawn, and the circuit is a **common-source amplifier with resistive load $ R_D $** and $ M_1 $ as the input transistor.\n\n---\n\n---\n\n### **📊 DC Analysis (Static Behavior)**\nAssume $ M_1 $ is **NMOS** (enhancement mode) and $ M_2 $ is **ignored** (or treated as a mistake), reducing the circuit to a **common-source amplifier with resistive load $ R_D $**:\n\n1. **Transistor Regions**:  \n   - For $ M_1 $ to operate in **saturation** (active region for amplification):  \n     $$\n     V_{GS1} = V_{in} > V_{th,n} \\quad \\text{and} \\quad V_{DS1} = V_{out} > V_{GS1} - V_{th,n}\n     $$\n   - If $ V_{in} $ is too low, $ M_1 $ is **cutoff** ($ V_{out} = V_{DD} $).\n\n2. **Output Voltage**:  \n   - When $ M_1 $ is **on**, current $ I_D $ flows through $ R_D $:  \n     $$\n     I_D = \\frac{V_{DD} - V_{out}}{R_D}\n     $$\n   - In saturation, $ I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS1} - V_{th,n})^2 $.  \n   - Solving for $ V_{out} $:  \n     $$\n     V_{out} = V_{DD} - R_D \\cdot \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{in} - V_{th,n})^2\n     $$\n   - This shows $ V_{out} $ **decreases** as $ V_{in} $ increases → **inverting behavior**.\n\n3. **Voltage Transfer Characteristic (VTC)**:  \n   - **Cutoff Region** ($ V_{in} < V_{th,n} $): $ M_1 $ off → $ I_D = 0 $ → $ V_{out} = V_{DD} $.  \n   - **Saturation Region** ($ V_{in} > V_{th,n} $): $ V_{out} $ drops quadratically with $ V_{in} $.  \n   - **Triode Region** (if $ V_{DS1} < V_{GS1} - V_{th,n} $): $ V_{out} $ drops linearly.  \n   - **Switching Threshold**: $ V_{in} = V_{th,n} $ (for NMOS-only circuit).\n\n> ⚠️ **Note**: If $ M_2 $ is **PMOS** with gate tied to $ V_{in} $, the circuit behaves like a **CMOS inverter with a series resistor**, which is non-standard but would still invert the input. However, $ R_D $ would limit the current, reducing the speed and gain.\n\n---\n\n---\n\n### **🔄 Small-Signal Analysis (AC Behavior)**\nAssume $ M_1 $ is in **saturation** and $ R_D $ is the load:\n\n1. **Small-Signal Model**:  \n   - $ M_1 $: Transconductance $ g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS1} - V_{th,n}) $.  \n   - Output resistance of $ M_1 $: $ r_{o1} = \\frac{1}{\\lambda I_D} $ (where $ \\lambda $ is channel-length modulation).  \n   - Load resistance: $ R_D $.\n\n2. **Voltage Gain**:  \n   $$\n   A_v = \\frac{v_{out}}{v_{in}} = -g_m \\cdot (R_D \\parallel r_{o1})\n   $$  \n   - Negative sign indicates **inverting amplifier**.  \n   - Magnitude: $ |A_v| = g_m R_D $ (if $ r_{o1} \\gg R_D $).\n\n3. **Input/Output Impedance**:  \n   - **Input Impedance**: Very high (gate of $ M_1 $ is insulated).  \n   - **Output Impedance**: $ R_{out} = R_D \\parallel r_{o1} \\approx R_D $ (if $ r_{o1} \\gg R_D $).\n\n---\n\n---\n\n### **🎯 Circuit Function**\n| **Configuration** | **Behavior** | **Key Features** |\n|-------------------|-------------|------------------|\n| **Common-Source Amplifier** (if $ M_2 $ is ignored) | Inverting amplifier | High input impedance, moderate gain ($ \\propto g_m R_D $) |\n| **Pseudo-NMOS Inverter** (if $ M_2 $ is a mistake) | Digital inverter | $ V_{out} = V_{DD} $ (low $ V_{in} $), $ V_{out} \\approx 0 $ (high $ V_{in} $) |\n| **CMOS Inverter with Series Resistor** (if $ M_2 $ is PMOS) | Inverter with limited drive strength | Slower switching due to $ R_D $, still inverts |\n\n> ✅ **Most Likely Intended Function**: **Inverting amplifier** (common-source with resistive load).\n\n---\n\n---\n\n### **⚡ Key Observations**\n1. **Inversion**: $ V_{out} $ decreases as $ V_{in} $ increases → **inverting behavior**.  \n2. **Nonlinearity**: The transfer curve is **quadratic** in saturation, linear in triode.  \n3. **Gain**: Limited by $ R_D $ and $ g_m $. Higher $ R_D $ → higher gain but slower response.  \n4. **Biasing**: Requires $ V_{in} > V_{th,n} $ for $ M_1 $ to conduct.  \n5. **Role of $ M_2 $**: Likely a **design error** or mislabeling. If $ M_2 $ is PMOS with gate tied to $ V_{in} $, it acts as a **complementary transistor**, but $ R_D $ reduces its effectiveness.\n\n---\n\n---\n\n### **📌 Summary**\n- **Circuit Type**: **Common-source amplifier with resistive load $ R_D $** (assuming $ M_2 $ is extraneous or misdrawn).  \n- **Function**: **Inverting voltage amplifier** (or digital inverter if operated in switching mode).  \n- **Gain**: $ A_v \\approx -g_m R_D $ (small-signal).  \n- **Input/Output**: High input impedance, output impedance ≈ $ R_D $.  \n- **DC Behavior**:  \n  - $ V_{in} < V_{th,n} $ → $ V_{out} = V_{DD} $.  \n  - $ V_{in} > V_{th,n} $ → $ V_{out} $ drops with $ V_{in} $.  \n- **Note**: The presence of $ M_2 $ (PMOS) with gate tied to $ V_{in} $ suggests a **CMOS-like structure**, but $ R_D $ makes it non-standard. If $ M_2 $ is intentional, the circuit may be a **CMOS inverter with a series resistor**, which is unusual but would still invert the input with reduced current drive.\n\n---\n**Recommendation**: Verify if $ M_2 $ is meant to be a **current source** (gate biased) or a **complementary transistor** (gate tied to $ V_{in} $). If it’s the latter, the circuit is a **CMOS inverter with a series resistor**, which is not typical but functionally still an inverter. For analog applications, treat it as a **common-source amplifier**.",
        "format": "markdown",
        "sha256": "acfa0af4841b7e37236b9255edd7cf34a414039e200e3ff3086c0ac49908b1d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the two series devices as NMOS/PMOS, then ignores M2 and analyzes a different circuit. It misses the essential result: the common-gate series NMOS pair behaves approximately like one transistor with an effective channel length equal to the sum of the channel lengths.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 10395,
        "total_tokens": 11959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1564,
        "output_tokens": 10395,
        "total_tokens": 11959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit, we first identify its **core structure and function**. The diagram shows a **PMOS-based current mirror** with a resistor load, where the reference current is set by the current source $ I_1 $. Here's a step-by-step breakdown:\n\n---\n\n### 🔹 **Circuit Components & Connections**\n- **$ V_{DD} $**: Power supply (positive voltage).\n- **$ R_D $**: Load resistor connected between $ V_{DD} $ and the output node $ V_{\\text{out}} $.\n- **$ M_1 $**: Diode-connected PMOS transistor (gate and drain are shorted).\n- **$ M_2 $**: PMOS transistor with its gate tied to the gate of $ M_1 $, forming a current mirror.\n- **$ I_1 $**: Current source connected from the common gate node to ground.\n- **$ V_{\\text{in}} $**: Input voltage at the source of $ M_1 $ (likely a bias voltage or supply in practice).\n\n---\n\n### 🔹 **Key Observations**\n1. **Diode-Connected $ M_1 $**:\n   - The gate and drain of $ M_1 $ are connected, so it operates in **saturation** (for PMOS, $ V_{SG} > |V_{thp}| $).\n   - The current through $ M_1 $ is equal to $ I_1 $, as the gate current is negligible.\n   - For a PMOS in saturation:\n     $$\n     I_1 = \\frac{1}{2} k_p \\left( \\frac{W}{L} \\right)_1 (V_{SG1} - |V_{thp}|)^2\n     $$\n     where $ V_{SG1} = V_{\\text{in}} - V_g $, and $ V_g $ is the gate voltage.\n\n2. **Current Mirror Action (Assuming $ M_1 $ and $ M_2 $ are Matched)**:\n   - $ M_2 $ has the same gate voltage $ V_g $ as $ M_1 $.\n   - Its source is tied to $ V_{DD} $, and its drain is connected to $ R_D $ and $ V_{\\text{out}} $.\n   - For $ M_2 $ in saturation:\n     $$\n     I_2 = \\frac{1}{2} k_p \\left( \\frac{W}{L} \\right)_2 (V_{SG2} - |V_{thp}|)^2\n     $$\n     where $ V_{SG2} = V_{DD} - V_g $.\n\n3. **If $ M_1 $ and $ M_2 $ are identical** ($ W/L $, $ k_p $, $ |V_{thp}| $):\n   - Then $ I_2 = I_1 $ **only if $ V_{\\text{in}} = V_{DD} $**.\n   - In general, the output current $ I_2 $ is proportional to $ I_1 $, scaled by the square of the ratio of $ V_{SG2} $ to $ V_{SG1} $.\n\n4. **Output Voltage $ V_{\\text{out}} $**:\n   - The current $ I_2 $ flows through $ R_D $, so:\n     $$\n     V_{\\text{out}} = V_{DD} - I_2 R_D\n     $$\n   - If $ M_1 $ and $ M_2 $ are matched and $ V_{\\text{in}} = V_{DD} $, then $ I_2 = I_1 $, and:\n     $$\n     V_{\\text{out}} = V_{DD} - I_1 R_D\n     $$\n\n---\n\n### 🔹 **Function of the Circuit**\nThis is a **PMOS current mirror** with a resistive load. It converts the reference current $ I_1 $ into a mirrored current $ I_2 $, which is then converted to a voltage $ V_{\\text{out}} $ across $ R_D $.\n\n- **Primary Use Case**: Voltage-to-current conversion or current amplification (if $ M_1 $ and $ M_2 $ have different sizes).\n- **Key Assumption**: $ V_{\\text{in}} $ is typically a bias voltage (e.g., $ V_{DD} $) to ensure proper operation of $ M_1 $ in saturation. If $ V_{\\text{in}} \\neq V_{DD} $, the mirror ratio depends on the relative $ V_{SG} $ values.\n\n---\n\n### 🔹 **Summary of Analysis**\n| Parameter | Expression |\n|-----------|------------|\n| Reference current | $ I_1 = \\frac{1}{2} k_p \\left( \\frac{W}{L} \\right)_1 (V_{\\text{in}} - V_g - |V_{thp}|)^2 $ |\n| Mirrored current | $ I_2 = \\frac{1}{2} k_p \\left( \\frac{W}{L} \\right)_2 (V_{DD} - V_g - |V_{thp}|)^2 $ |\n| Output voltage | $ V_{\\text{out}} = V_{DD} - I_2 R_D $ |\n| **Special Case (Matched Transistors, $ V_{\\text{in}} = V_{DD} $)** | $ V_{\\text{out}} = V_{DD} - I_1 R_D $ |\n\n---\n\n### 🔹 **Conclusion**\nThe circuit is a **PMOS current mirror** with a resistive load. It uses $ M_1 $ (diode-connected) to set the gate voltage based on $ I_1 $, and $ M_2 $ mirrors this current to produce an output voltage $ V_{\\text{out}} $ across $ R_D $. Assuming matched transistors and $ V_{\\text{in}} = V_{DD} $, the output voltage simplifies to:\n$$\n\\boxed{V_{\\text{out}} = V_{DD} - I_1 R_D}\n$$\nThis configuration is commonly used in analog ICs for biasing, current replication, or voltage reference generation.",
        "format": "markdown",
        "sha256": "bbaba0c43930d21a5efc03ba67da39a89e893417f08aefa6b646146e5b90e766"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer fundamentally misidentifies the circuit as a PMOS current mirror with a diode-connected M1. The actual circuit is an NMOS source-coupled pair: M1's source follower drives M2's common-gate stage, so the proposed current-mirror analysis does not apply.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2376,
        "output_tokens": 8180,
        "total_tokens": 10556,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6879,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2376,
        "output_tokens": 8180,
        "total_tokens": 10556,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6879,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Cascode Amplifier with Resistive Load**\n\nThe given circuit is a **common-source cascode amplifier** using two MOSFETs ($M_1$, $M_2$), a current source ($I_1$), and a load resistor ($R_D$). Here's a detailed breakdown:\n\n---\n\n---\n\n## **🔹 1. Circuit Configuration & Component Roles**\n\n| **Component** | **Role** | **Type** | **Notes** |\n|---------------|----------|----------|-----------|\n| $M_1$ | Input transistor (common-source) | NMOS | Converts input voltage $V_{in}$ to current |\n| $M_2$ | Cascode transistor (common-gate) | PMOS | Buffers current, increases output impedance |\n| $R_D$ | Load resistor | Passive | Converts drain current to output voltage $V_{out}$ |\n| $I_1$ | Bias current source | Ideal | Sets the operating point of $M_1$ |\n| $V_{DD}$ | Power supply | DC | Positive supply for the circuit |\n| $V_b$ | Bias voltage for $M_2$ | DC | Ensures $M_2$ operates in saturation |\n\n- **Signal Flow**:  \n  $V_{in} \\rightarrow M_1 \\text{ (gate)} \\rightarrow \\text{Drain of } M_1 \\rightarrow \\text{Source of } M_2 \\rightarrow \\text{Drain of } M_2 \\rightarrow R_D \\rightarrow V_{out}$\n\n---\n\n---\n\n## **🔹 2. DC Operating Point Analysis**\n\n### **Assumptions**\n- All transistors are in **saturation** (valid for small-signal operation).\n- Ideal current source $I_1$ provides constant current $I_1$ through $M_1$.\n- $M_1$ is **NMOS**, $M_2$ is **PMOS** (based on symbol orientation).\n\n---\n\n### **Key Equations**\n\n#### **For $M_1$ (NMOS):**\n- Drain current:  \n  $$\n  I_{D1} = I_1 = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{th,n})^2\n  $$\n  where:\n  - $V_{GS1} = V_{in} - V_{S1}$\n  - $V_{S1}$ = Source voltage of $M_1$ (determined by $I_1$)\n\n- **Saturation condition**:  \n  $$\n  V_{DS1} > V_{GS1} - V_{th,n} \\quad \\Rightarrow \\quad V_Y > V_{in} - V_{th,n}\n  $$\n  (where $V_Y$ = Drain voltage of $M_1$ = Source voltage of $M_2$)\n\n---\n\n#### **For $M_2$ (PMOS):**\n- Drain current:  \n  $$\n  I_{D2} = I_1 = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{SG2} - |V_{th,p}|)^2\n  $$\n  where:\n  - $V_{SG2} = V_Y - V_b$\n\n- **Saturation condition**:  \n  $$\n  V_{SD2} > V_{SG2} - |V_{th,p}| \\quad \\Rightarrow \\quad V_{out} < V_b + |V_{th,p}|\n  $$\n\n- **Output voltage**:  \n  $$\n  V_{out} = V_{DD} - I_1 R_D\n  $$\n\n- **Drain-source voltage of $M_2$**:  \n  $$\n  V_{SD2} = V_Y - V_{out}\n  $$\n\n- **Source voltage of $M_2$ (i.e., $V_Y$)**:  \n  $$\n  V_Y = V_b + |V_{th,p}| + \\sqrt{\\frac{2 I_1}{\\mu_p C_{ox} (W/L)_2}}\n  $$\n\n---\n\n### **Biasing Conditions**\nTo ensure both transistors are in saturation:\n1. **For $M_1$**:  \n   $$\n   V_{in} > V_{S1} + V_{th,n}\n   $$\n2. **For $M_2$**:  \n   $$\n   V_b < V_Y - |V_{th,p}| \\quad \\text{and} \\quad V_{out} < V_b + |V_{th,p}|\n   $$\n   Substituting $V_{out} = V_{DD} - I_1 R_D$, we get:\n   $$\n   V_b > V_{DD} - I_1 R_D - |V_{th,p}|\n   $$\n\n---\n\n---\n\n## **🔹 3. Small-Signal Analysis**\n\n### **Assumptions**\n- Ideal current source $I_1$ has **infinite impedance** → $M_1$'s source is **AC ground**.\n- Transistors operate in **saturation** (small-signal model valid).\n- Channel length modulation is neglected (i.e., $r_o \\to \\infty$).\n\n---\n\n### **Small-Signal Model**\n- **$M_1$ (NMOS)**:  \n  - Transconductance: $g_{m1} = \\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_1}$  \n  - Input: $v_{in}$ (gate), source at AC ground  \n  - Output: $v_{d1} = v_{Y}$ (drain)\n\n- **$M_2$ (PMOS)**:  \n  - Transconductance: $g_{m2} = \\sqrt{2 \\mu_p C_{ox} (W/L)_2 I_1}$  \n  - Gate at AC ground ($v_b = 0$) → **common-gate stage**  \n  - Input: $v_{d1}$ (source), output: $v_{out}$\n\n- **Load Resistor $R_D$**:  \n  - Converts current to voltage: $v_{out} = -i_{d2} R_D$\n\n---\n\n### **Voltage Gain**\nThe small-signal current from $M_1$ is:\n$$\ni_{d1} = g_{m1} v_{in}\n$$\nThis current flows through $M_2$ and $R_D$, so:\n$$\ni_{d2} = i_{d1} = g_{m1} v_{in}\n$$\nThus, the output voltage is:\n$$\nv_{out} = -i_{d2} R_D = -g_{m1} R_D v_{in}\n$$\n$$\n\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} R_D}\n$$\n\n> **Note**: The negative sign indicates **phase inversion** between input and output.\n\n---\n\n### **Key Advantages of Cascode Topology**\n1. **Higher Output Impedance**:  \n   The cascode stage ($M_1 + M_2$) has an output impedance approximately equal to $g_{m2} r_{o1} r_{o2}$, which is **much larger** than a single transistor. This improves gain stability when driving low-impedance loads.\n\n2. **Reduced Miller Effect**:  \n   The common-gate $M_2$ isolates the drain of $M_1$ from the output, reducing the **Miller capacitance** ($C_{gd}$) effect on the input. This **extends the bandwidth** of the amplifier.\n\n3. **Improved Frequency Response**:  \n   The cascode configuration minimizes the feedback capacitance between input and output, leading to better high-frequency performance.\n\n---\n\n---\n\n## **🔹 4. Summary of Key Results**\n\n| **Parameter** | **Expression** | **Physical Meaning** |\n|---------------|----------------|----------------------|\n| **DC Output Voltage** | $V_{out} = V_{DD} - I_1 R_D$ | Determined by current source and load resistor |\n| **Voltage Gain** | $A_v = -g_{m1} R_D$ | Linear gain with phase inversion |\n| **Transconductance of $M_1$** | $g_{m1} = \\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_1}$ | Converts $V_{in}$ to current |\n| **Saturation Condition for $M_1$** | $V_Y > V_{in} - V_{th,n}$ | Ensures $M_1$ is in saturation |\n| **Saturation Condition for $M_2$** | $V_{out} < V_b + |V_{th,p}|$ | Ensures $M_2$ is in saturation |\n\n---\n\n---\n\n## **🔹 5. Practical Considerations**\n\n- **Biasing $V_b$**:  \n  $V_b$ must be set such that $M_2$ remains in saturation across the expected range of $V_{in}$. A typical choice is:\n  $$\n  V_b = V_Y - |V_{th,p}| - V_{ov2}\n  $$\n  where $V_{ov2}$ is the overdrive voltage for $M_2$.\n\n- **Current Source Implementation**:  \n  In real circuits, $I_1$ is often implemented using a **current mirror** or a **bias transistor** to ensure stable operation.\n\n- **Frequency Limitations**:  \n  At high frequencies, parasitic capacitances (e.g., $C_{gs}$, $C_{gd}$) limit the bandwidth. The cascode helps mitigate this by reducing the Miller effect.\n\n---\n\n---\n\n### **📌 Final Conclusion**\n\nThis circuit is a **cascode amplifier** that combines the benefits of **high gain** (from the resistive load) and **wide bandwidth** (from the cascode topology). It is commonly used in **high-frequency analog design**, such as RF amplifiers or analog front-ends, where both gain and bandwidth are critical. The voltage gain is approximately $-g_{m1} R_D$, and the cascode structure ensures stable operation with improved high-frequency response.",
        "format": "markdown",
        "sha256": "2ca571ba04b0272f499a6e516a010f357c55a1483752c815a9654c8562f61153"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a common-source cascode, assigns M2 the wrong role and polarity, and gives an inverting gain; the golden solution explicitly assigns 0 to this topology error.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2376,
        "output_tokens": 8206,
        "total_tokens": 10582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5979,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2376,
        "output_tokens": 8206,
        "total_tokens": 10582,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5979,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: Differential Pair with Resistive Load**\n\nThe provided circuit is a **differential pair** using two NMOS transistors ($M_1$, $M_2$), a tail current source $I_1$, a resistive load $R_D$, and voltage supplies $V_{DD}$, $V_b$, and $V_{in}$. Below is a structured breakdown of its operation, DC behavior, and small-signal response.\n\n---\n\n---\n\n## **🔹 Circuit Configuration**\n- **Transistors**: $M_1$ and $M_2$ are **NMOS** (arrow on the source indicates body connection to the source).\n- **Tail Current Source**: $I_1$ provides a constant current from the common source node of $M_1$ and $M_2$ to ground.\n- **Load Resistor**: $R_D$ connects $V_{DD}$ to the drain of $M_2$, forming the output node $V_{out}$.\n- **Inputs**:\n  - $V_{in}$ drives the gate of $M_1$.\n  - $V_b$ drives the gate of $M_2$ (acts as a reference voltage for the differential pair).\n- **Output**: $V_{out}$ is the drain voltage of $M_2$ (and $M_1$, since their drains are connected).\n\n---\n\n---\n\n## **🔹 DC Analysis (Operating Point)**\n\n### **1. Current Relationships**\n- The tail current source $I_1$ enforces:\n  $$\n  I_{D1} + I_{D2} = I_1\n  $$\n  where $I_{D1}$ and $I_{D2}$ are the drain currents of $M_1$ and $M_2$, respectively.\n\n- The current through $R_D$ is equal to $I_{D2}$ (since $M_2$’s drain is connected to $R_D$):\n  $$\n  I_{D2} = \\frac{V_{DD} - V_{out}}{R_D}\n  $$\n\n### **2. Drain Voltage Expression**\nFrom the above:\n$$\nV_{out} = V_{DD} - I_{D2} \\cdot R_D\n$$\n\n### **3. Transistor Operation (Saturation Region)**\nAssume both transistors are in **saturation** (valid for most analog applications):\n$$\nI_{D} = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2\n$$\n- For $M_1$: $V_{GS1} = V_{in} - V_S$, where $V_S$ is the common source voltage.\n- For $M_2$: $V_{GS2} = V_b - V_S$.\n\nIf $M_1$ and $M_2$ are **matched** ($W/L$ identical), then:\n$$\nI_{D1} = k (V_{in} - V_S - V_{th})^2, \\quad I_{D2} = k (V_b - V_S - V_{th})^2\n$$\nwhere $k = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L}$.\n\n### **4. DC Output Voltage (Balanced Case)**\nWhen $V_{in} = V_b$, the currents split equally:\n$$\nI_{D1} = I_{D2} = \\frac{I_1}{2}\n$$\nThus:\n$$\nV_{out} = V_{DD} - \\frac{I_1}{2} R_D\n$$\n\nThis is the **quiescent output voltage** (DC bias point).\n\n---\n\n---\n\n## **🔹 Small-Signal Analysis (AC Behavior)**\n\n### **1. Small-Signal Model**\n- The differential pair converts the input voltage difference $(v_{in} = V_{in} - V_b)$ into a **differential current** $i_{d} = g_m v_{in}$, where $g_m$ is the transconductance of each transistor.\n- For a **single-ended output** (only $M_2$’s drain is loaded with $R_D$), the small-signal output voltage is:\n  $$\n  v_{out} = -g_m R_D \\cdot \\frac{v_{in}}{2}\n  $$\n  The factor of $1/2$ arises because only half the differential current flows through $R_D$ (the other half flows through $M_1$’s drain, which is not loaded in this configuration).\n\n### **2. Voltage Gain**\nThe **small-signal voltage gain** from $v_{in}$ to $v_{out}$ is:\n$$\nA_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{2}\n$$\n- **Negative sign**: Indicates phase inversion (common in common-source amplifiers).\n- **Magnitude**: Depends on $g_m$ (set by $I_1$ and device parameters) and $R_D$.\n\n### **3. Transconductance ($g_m$)**\nFor a MOSFET in saturation:\n$$\ng_m = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} I_{D}}\n$$\nIf $I_{D} = I_1/2$ (for matched transistors), then:\n$$\ng_m = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} \\cdot \\frac{I_1}{2}} = \\sqrt{\\mu_n C_{ox} \\frac{W}{L} I_1}\n$$\n\n---\n\n---\n\n## **🔹 Key Observations**\n\n| **Parameter**         | **Expression**                                                                 |\n|------------------------|-------------------------------------------------------------------------------|\n| **DC Output Voltage**  | $V_{out} = V_{DD} - I_{D2} R_D$ (depends on $V_{in}$ and $V_b$)             |\n| **Quiescent Point**    | $V_{out} = V_{DD} - \\frac{I_1}{2} R_D$ (when $V_{in} = V_b$)                 |\n| **Voltage Gain**       | $A_v = -\\frac{g_m R_D}{2}$ (single-ended output)                            |\n| **Input Range**        | Limited by saturation conditions: $V_{DS} \\geq V_{GS} - V_{th}$ for both $M_1$ and $M_2$ |\n\n---\n\n---\n\n## **🔹 Practical Implications**\n1. **Differential Input**: The circuit amplifies the **difference** between $V_{in}$ and $V_b$, rejecting common-mode signals (e.g., noise or power supply variations).\n2. **Biasing**: $V_b$ sets the operating point. If $V_b$ is fixed, $V_{in}$ must be within a range to keep both transistors in saturation.\n3. **Load Resistor**: $R_D$ converts the drain current of $M_2$ into a voltage. A larger $R_D$ increases gain but reduces bandwidth due to parasitic capacitances.\n4. **Current Source**: $I_1$ stabilizes the tail current, improving linearity and rejecting supply noise.\n\n---\n\n---\n\n## **🔹 Summary**\nThis circuit is a **single-ended differential pair** with:\n- **Input**: $V_{in}$ (gate of $M_1$), $V_b$ (gate of $M_2$).\n- **Output**: $V_{out} = V_{DD} - I_{D2} R_D$, where $I_{D2}$ depends on $V_{in} - V_b$.\n- **Gain**: $A_v = -\\frac{g_m R_D}{2}$, with $g_m$ proportional to $\\sqrt{I_1}$.\n- **Use Case**: Analog signal processing (e.g., operational amplifier input stage), where differential inputs are converted to a single-ended output.\n\n> **Note**: If $M_1$’s drain were connected to a **current mirror** instead of $M_2$’s drain, this would form a **fully differential amplifier**. However, in this configuration, the connection of both drains to $V_{out}$ implies a **single-ended output** with a resistive load on one side.",
        "format": "markdown",
        "sha256": "fbcc78784715679ce5e79439cc5f1cf26d14ba96b02bc88976d5d7d0109dc192"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It recognizes the source-coupled differential-pair view, with M2 biased by Vb and the output at M2’s drain. However, it incorrectly says the drains are tied and derives an inverting gain; the actual gain is non-inverting, so it does not earn full credit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2376,
        "output_tokens": 10000,
        "total_tokens": 12376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2376,
        "output_tokens": 10000,
        "total_tokens": 12376,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can exhibit **inductive behavior** due to **feedback through the gate-drain capacitance ($C_{gd1}$) of transistor $M_1$**, combined with the **series resistor $R_S$** at the gate. Here's a step-by-step explanation:\n\n---\n\n### **Key Circuit Elements**\n- **$M_1$**: PMOS transistor (source connected to $V_{DD}$, gate driven via $R_S$).\n- **$M_2$**: NMOS transistor (gate biased at $V_b$, acting as a current source load).\n- **Output Node**: Drain of both $M_1$ and $M_2$ (where $V_{out}$ is measured).\n\n---\n\n### **Why Inductive Impedance?**\nIn small-signal analysis, the **output impedance** ($Z_{out}$) is determined by applying a test voltage $V_x$ at the output and measuring the resulting current $I_x$. The **imaginary part of $Z_{out}$** (i.e., $X_{out} = \\text{Im}(Z_{out})$) determines whether the impedance is inductive ($X_{out} > 0$) or capacitive ($X_{out} < 0$).\n\n#### **1. Feedback Path via $C_{gd1}$ and $R_S$**\n- The **gate-drain capacitance** ($C_{gd1}$) of $M_1$ couples the output node (drain) to its gate.\n- When $V_x$ (the output voltage) changes, it induces a **current through $C_{gd1}$** into the gate node of $M_1$.\n- The gate of $M_1$ is **not directly grounded**—it is connected to ground via $R_S$ (since $V_{in}$ is AC-grounded for output impedance analysis). This creates a **finite impedance path** for the feedback signal.\n\n#### **2. Phase Shift from $R_S$ and $C_{gd1}$**\n- The combination of $R_S$ and $C_{gd1}$ forms a **high-pass network** at the gate of $M_1$.\n- As frequency increases, the **voltage at the gate of $M_1$** ($v_{g1}$) lags behind $V_x$ due to the capacitive reactance of $C_{gd1}$.\n- This **phase lag** in $v_{g1}$ causes the **drain current of $M_1$** ($i_{d1}$) to **lead** the output voltage $V_x$ (because $i_{d1}$ depends on $v_{g1}$ via transconductance $g_{m1}$).\n\n#### **3. Resulting Current-Voltage Relationship**\n- In a purely resistive impedance, current and voltage are **in phase**.\n- Here, the **current $I_x$** (sum of $i_{d1}$ and $i_{d2}$) **leads** $V_x$ due to the feedback through $C_{gd1}$ and $R_S$.\n- A **leading current** (relative to voltage) corresponds to a **positive imaginary impedance**, which is the hallmark of an **inductor**.\n\n---\n\n### **Mathematical Insight**\nIn the small-signal model:\n- The gate voltage $v_{g1}$ is derived from the feedback loop:\n  $$\n  v_{g1} = \\frac{j\\omega C_{gd1} V_x}{1/R_S + j\\omega (C_{gs1} + C_{gd1})}\n  $$\n- The drain current of $M_1$ ($i_{d1}$) includes a term proportional to $g_{m1} v_{g1}$, which introduces a **frequency-dependent phase shift**.\n- When calculating $Z_{out} = V_x / I_x$, the **imaginary part of the admittance** ($Y_{out} = I_x / V_x$) becomes **negative** at certain frequencies, leading to a **positive imaginary part in $Z_{out}$** (i.e., inductive behavior).\n\n---\n\n### **Physical Interpretation**\n- The **$R_S$-$C_{gd1}$ feedback loop** acts like a **delay element** for the gate voltage.\n- This delay causes the **transconductance-generated current** ($g_{m1} v_{g1}$) to **lag the output voltage**, but because of the sign convention in MOSFETs (PMOS), the net effect is a **current that leads the voltage**—mimicking an inductor.\n- This is analogous to how a **gyrator circuit** (using active devices) can synthesize inductance from capacitive elements.\n\n---\n\n### **Conclusion**\nThe **inductive output impedance** arises from the **interaction of the gate-drain capacitance ($C_{gd1}$) and the series resistor $R_S$**, which introduces a **phase lead in the current** relative to the output voltage. This phase relationship is characteristic of an inductor, making the output impedance appear inductive at certain frequencies.\n\n> **Key Takeaway**: In active circuits with feedback (e.g., through $C_{gd}$ and a gate resistor), capacitive elements can produce **inductive behavior** in impedance due to phase shifts introduced by the feedback path. This is a classic example of **active inductance synthesis** in MOSFET circuits.",
        "format": "markdown",
        "sha256": "0083ae77f4cf3d9c01c67de7f7350ebaf3f202ee0a7456881831ed1d1fe6e6b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology and attributes the effect to Cgd feedback. The actual mechanism is the source-follower M1’s Cgs: Zout rises from about 1/gm1 toward RS as frequency increases, and is inductive when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 6615,
        "total_tokens": 8363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 6615,
        "total_tokens": 8363,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can exhibit **inductive behavior** due to the **feedback interaction between the gate resistor \\( R_S \\) and the gate-drain capacitance \\( C_{gd1} \\) of transistor \\( M_1 \\)**, combined with the **negative transconductance sign of the PMOS transistor \\( M_1 \\)**. Here's a detailed explanation:\n\n---\n\n### **Key Circuit Characteristics**\n- **\\( M_1 \\) is a PMOS transistor** (source connected to \\( V_{DD} \\), drain to \\( V_{out} \\), gate to \\( V_{in} \\) via \\( R_S \\)).\n- **\\( M_2 \\) is an NMOS transistor** (drain to \\( V_{out} \\), source to ground, gate biased at \\( V_b \\)), acting as an active load (current source or resistor).\n- **Output node**: Common drain node of \\( M_1 \\) and \\( M_2 \\).\n\n---\n\n### **Why Output Impedance Can Be Inductive**\n\n#### **1. Feedback Path via \\( R_S \\) and \\( C_{gd1} \\)**\nWhen measuring output impedance (\\( Z_{out} = V_{out} / I_{test} \\)), the input \\( V_{in} \\) is **AC-grounded**. Thus:\n- The gate of \\( M_1 \\) is connected to AC ground through \\( R_S \\).\n- The **gate-drain capacitance \\( C_{gd1} \\)** couples the output voltage \\( V_{out} \\) to the gate of \\( M_1 \\).\n\nThis creates a **feedback loop**:\n$$\nv_{g1} = V_{out} \\cdot \\frac{j\\omega C_{gd1} R_S}{1 + j\\omega C_{gd1} R_S}\n$$\nwhere \\( v_{g1} \\) is the small-signal gate voltage of \\( M_1 \\).\n\n---\n\n#### **2. Transconductance of PMOS (\\( M_1 \\))**\nFor a **PMOS transistor**, the small-signal drain current is:\n$$\ni_{d1} = -g_{m1} v_{gs1} + \\frac{V_{out}}{r_{o1}}\n$$\n- **Sign of \\( g_{m1} \\)**: Negative (for PMOS, an increase in \\( v_{gs} \\) reduces drain current).\n- \\( v_{gs1} = v_{g1} \\) (since the source of \\( M_1 \\) is AC-grounded at \\( V_{DD} \\)).\n\nSubstituting \\( v_{g1} \\):\n$$\ni_{d1} = -g_{m1} \\left( V_{out} \\cdot \\frac{j\\omega C_{gd1} R_S}{1 + j\\omega C_{gd1} R_S} \\right) + \\frac{V_{out}}{r_{o1}}\n$$\n\n---\n\n#### **3. Output Admittance (\\( Y_{out} \\))**\nThe total output admittance is:\n$$\nY_{out} = \\frac{I_{test}}{V_{out}} = \\underbrace{ -g_{m1} \\cdot \\frac{j\\omega C_{gd1} R_S}{1 + j\\omega C_{gd1} R_S} }_{\\text{Feedback term}} + \\underbrace{ \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} }_{\\text{Resistive term}} + \\underbrace{ j\\omega (C_{db1} + C_{db2} + C_{gd2}) }_{\\text{Capacitive term}}\n$$\n\n**Focus on the imaginary part of \\( Y_{out} \\):**\n- The feedback term contributes:\n  $$\n  \\text{Im}(Y_{out})_{\\text{feedback}} = -g_{m1} \\cdot \\frac{\\omega C_{gd1} R_S}{1 + (\\omega C_{gd1} R_S)^2}\n  $$\n- The capacitive term contributes:\n  $$\n  \\text{Im}(Y_{out})_{\\text{cap}} = \\omega (C_{db1} + C_{db2} + C_{gd2})\n  $$\n\n**Total imaginary part:**\n$$\n\\text{Im}(Y_{out}) = \\omega \\left[ (C_{db1} + C_{db2} + C_{gd2}) - \\frac{g_{m1} C_{gd1} R_S}{1 + (\\omega C_{gd1} R_S)^2} \\right]\n$$\n\n---\n\n#### **4. Condition for Inductive Behavior**\nFor \\( Z_{out} \\) to be **inductive**, its **imaginary part must be positive**:\n$$\n\\text{Im}(Z_{out}) > 0 \\quad \\Rightarrow \\quad \\text{Im}(Y_{out}) < 0\n$$\n\nThis occurs when:\n$$\n(C_{db1} + C_{db2} + C_{gd2}) < \\frac{g_{m1} C_{gd1} R_S}{1 + (\\omega C_{gd1} R_S)^2}\n$$\n\n**At low frequencies** (\\( \\omega C_{gd1} R_S \\ll 1 \\)), the condition simplifies to:\n$$\nC_{\\text{total}} < g_{m1} C_{gd1} R_S\n$$\nwhere \\( C_{\\text{total}} = C_{db1} + C_{db2} + C_{gd2} \\).\n\nIf this inequality holds, the **feedback term dominates**, making \\( \\text{Im}(Y_{out}) < 0 \\), and thus:\n$$\n\\text{Im}(Z_{out}) = -\\frac{\\text{Im}(Y_{out})}{|Y_{out}|^2} > 0\n$$\nThis means \\( Z_{out} \\) has a **positive imaginary component**, characteristic of an **inductor**.\n\n---\n\n### **Physical Interpretation**\n- The **gate-drain capacitance \\( C_{gd1} \\)** and **gate resistor \\( R_S \\)** form a **phase-shifting feedback network**.\n- The **negative transconductance of PMOS \\( M_1 \\)** (due to its operation) causes the feedback current to **oppose the capacitive current** from other parasitic capacitances.\n- When the feedback effect is strong enough (i.e., \\( g_{m1} R_S C_{gd1} > C_{\\text{total}} \\)), the **effective capacitance at the output becomes negative**, leading to **inductive behavior** (since a negative capacitance \\( -C \\) has impedance \\( +j/(\\omega C) \\), equivalent to an inductor).\n\n---\n\n### **Conclusion**\nThe output impedance of the circuit can be **inductive** because the **feedback loop formed by \\( R_S \\) and \\( C_{gd1} \\)**, combined with the **negative transconductance of the PMOS transistor \\( M_1 \\)**, introduces a **negative imaginary component in the output admittance**. Under the condition \\( g_{m1} R_S C_{gd1} > C_{\\text{total}} \\), this results in a **positive imaginary part in the output impedance**, mimicking inductive behavior. This is a classic example of **active feedback-induced inductance** in analog circuits.",
        "format": "markdown",
        "sha256": "f4bab614f3ee22c1820555357b25f6957576c10491065371d885e6468fce5276"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the topology and output node: M1 is an NMOS source follower with the output at its source, not a PMOS with the output at its drain. It attributes the effect to Cgd1 feedback rather than the actual RS–Cgs1 mechanism, so its condition and explanation do not apply.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 16978,
        "total_tokens": 18726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15444,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 16978,
        "total_tokens": 18726,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15444,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can exhibit **inductive behavior** due to **active feedback through the gate-drain capacitance ($C_{gd1}$) of transistor $M_1$ and the gate resistance $R_S$**. Here’s a step-by-step explanation:\n\n---\n\n### **Key Circuit Insight**\n- The circuit is a **PMOS-NMOS pair** ($M_1$ and $M_2$) with $M_1$’s gate connected to $V_{in}$ via resistor $R_S$.\n- For **output impedance analysis**, we set all independent sources ($V_{in}$, $V_{DD}$, $V_b$) to **AC ground**.\n- The **output node** ($V_{out}$) is shared by the drains of $M_1$ and $M_2$.\n\n---\n\n### **Why Inductive Impedance?**\n#### **1. Feedback Path via $C_{gd1}$ and $R_S$**\n- The **gate-drain capacitance** ($C_{gd1}$) of $M_1$ couples the **output voltage** ($V_{out}$) back to its **gate**.\n- The gate of $M_1$ is also connected to **AC ground** through $R_S$, forming an **RC network** at the gate:\n  - $C_{gs1}$ (gate-source capacitance) to ground.\n  - $C_{gd1}$ (gate-drain capacitance) to the output node.\n  - $R_S$ to ground.\n\n#### **2. Small-Signal Feedback Analysis**\n- When $V_{out}$ changes, $C_{gd1}$ induces a **small-signal voltage** at the gate of $M_1$:\n  $$\n  v_{g1} = \\frac{j\\omega C_{gd1}}{1/R_S + j\\omega (C_{gs1} + C_{gd1})} \\cdot v_{out}.\n  $$\n- This gate voltage ($v_{g1}$) modulates the **drain current** of $M_1$ via its transconductance ($g_{m1}$):\n  $$\n  i_{d1} = g_{m1} v_{g1} + \\frac{v_{out}}{r_{o1}}.\n  $$\n- The **feedback loop** (output → $C_{gd1}$ → gate → $R_S$ → ground) introduces a **phase shift** in the relationship between $v_{out}$ and $i_{d1}$.\n\n#### **3. Admittance and Impedance Phase Shift**\n- The **admittance** ($Y_{out} = i_{total}/v_{out}$) at the output node includes:\n  - A **real part** (from $r_{o1}$ and $r_{o2}$).\n  - A **complex part** from the feedback term:  \n    $$\n    Y_{out} \\propto -\\frac{g_{m1} j\\omega C_{gd1} R_S}{1 + j\\omega R_S (C_{gs1} + C_{gd1})}.\n    $$\n- Simplifying, the **imaginary part of $Y_{out}$ is negative** (due to the $-j$ term in the numerator and the phase shift from the denominator).\n- Since **impedance $Z_{out} = 1/Y_{out}$**, a **negative imaginary admittance** ($B < 0$) implies a **positive imaginary impedance** ($X > 0$), which is **inductive**.\n\n---\n\n### **Physical Interpretation**\n- The **resistive-capacitive feedback** ($R_S$ and $C_{gd1}$) creates a **delayed response** in the gate voltage of $M_1$ to changes in $V_{out}$.\n- The transistor’s **transconductance ($g_{m1}$)** amplifies this delayed signal, causing the **drain current to lag the output voltage**.\n- In AC terms, **current lagging voltage** corresponds to **inductive behavior** (since $Z_L = j\\omega L$ has a +90° phase shift).\n\n---\n\n### **Why This Doesn’t Happen in Standard Circuits**\n- In typical MOSFET amplifiers (e.g., common-source), the gate is **AC-grounded directly** (no $R_S$), so feedback is purely capacitive, leading to **capacitive output impedance**.\n- Here, **$R_S$ introduces a resistive path**, which, combined with $C_{gd1}$, creates a **non-ideal phase shift** that flips the reactance sign.\n\n---\n\n### **Conclusion**\nThe **interaction between $R_S$, $C_{gd1}$, and $g_{m1}$** forms a feedback loop that introduces a **phase lead in the admittance**, resulting in a **positive imaginary component in the impedance**. This is why the output impedance can appear **inductive** at certain frequencies.  \n**In short:** *The gate resistance $R_S$ and gate-drain capacitance $C_{gd1}$ create a feedback path that, when combined with the transistor’s transconductance, inverts the phase of the output current relative to the voltage, mimicking inductive behavior.*",
        "format": "markdown",
        "sha256": "0c485bd540cc90cd56af20c8c656c9c121fd6f78afa04e55cf37a300a6e9325e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The conclusion is superficially right, but the explanation uses the wrong topology: the output is M1’s source, not a shared-drain node, so Cgd1 does not provide the proposed output-to-gate feedback. The inductive behavior comes from the RS–Cgs1 interaction and the transition in Zout from about 1/gm1 to RS, which the answer misses.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 9926,
        "total_tokens": 11674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 9926,
        "total_tokens": 11674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8829,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "### **Circuit Analysis: NMOS Current Mirror with Resistive Load**\n\nThe given circuit is a **basic NMOS current mirror** with a resistive load $ R_{D1} $. It consists of:\n- A **current source** $ I_{\\text{in}} $ (reference current),\n- Two **NMOS transistors** $ M_1 $ and $ M_2 $,\n- A **load resistor** $ R_{D1} $,\n- A **power supply** $ V_{DD} $,\n- Output voltage $ V_{\\text{out}} $ at the drain of $ M_1 $.\n\n---\n\n---\n\n## **1. Circuit Operation**\n### **(a) Role of $ M_2 $ (Diode-Connected Transistor)**\n- $ M_2 $ is **diode-connected**: its gate and drain are shorted at node $ X $.\n- This configuration forces $ V_{GS2} = V_{DS2} $, ensuring $ M_2 $ operates in **saturation** (assuming proper biasing).\n- The current through $ M_2 $ is equal to the input current $ I_{\\text{in}} $:\n  $$\n  I_{D2} = I_{\\text{in}}\n  $$\n- The gate-source voltage of $ M_2 $ is:\n  $$\n  V_{GS2} = V_X = V_{th} + \\sqrt{\\frac{2I_{\\text{in}}}{\\mu_n C_{ox} \\left(\\frac{W}{L}\\right)}}\n  $$\n  (for an ideal square-law model, where $ V_{th} $ is the threshold voltage, $ \\mu_n $ is mobility, $ C_{ox} $ is oxide capacitance, and $ W/L $ is the transistor aspect ratio).\n\n---\n\n### **(b) Role of $ M_1 $ (Output Transistor)**\n- $ M_1 $ shares the same gate voltage as $ M_2 $ (since both gates are connected to node $ X $).\n- If $ M_1 $ and $ M_2 $ are **identical** (same $ W/L $, process parameters), then:\n  $$\n  V_{GS1} = V_{GS2}, \\quad \\Rightarrow I_{D1} = I_{D2} = I_{\\text{in}}\n  $$\n  (assuming both transistors are in **saturation**).\n- The drain current $ I_{D1} $ flows through $ R_{D1} $, creating a voltage drop:\n  $$\n  V_{R_{D1}} = I_{D1} \\cdot R_{D1} = I_{\\text{in}} \\cdot R_{D1}\n  $$\n\n---\n\n### **(c) Output Voltage $ V_{\\text{out}} $**\n- The output voltage is the voltage at the drain of $ M_1 $, which is connected to $ R_{D1} $ and $ V_{DD} $:\n  $$\n  V_{\\text{out}} = V_{DD} - I_{D1} \\cdot R_{D1}\n  $$\n- If $ I_{D1} = I_{\\text{in}} $ (for matched transistors in saturation):\n  $$\n  \\boxed{V_{\\text{out}} = V_{DD} - I_{\\text{in}} \\cdot R_{D1}}\n  $$\n\n---\n\n---\n\n## **2. Conditions for Proper Operation**\n### **(a) Saturation Condition for $ M_1 $**\nFor $ M_1 $ to operate in **saturation**, its drain-source voltage must satisfy:\n$$\nV_{DS1} \\geq V_{GS1} - V_{th}\n$$\n- $ V_{DS1} = V_{\\text{out}} $ (since source is grounded),\n- $ V_{GS1} = V_X = V_{th} + \\sqrt{\\frac{2I_{\\text{in}}}{\\mu_n C_{ox} (W/L)}} $\n\nThus:\n$$\nV_{DD} - I_{\\text{in}} R_{D1} \\geq \\sqrt{\\frac{2I_{\\text{in}}}{\\mu_n C_{ox} (W/L)}}\n$$\nIf this condition holds, $ M_1 $ remains in saturation, and $ I_{D1} = I_{\\text{in}} $. If not, $ M_1 $ enters the **triode region**, and the current $ I_{D1} $ will be less than $ I_{\\text{in}} $.\n\n---\n\n### **(b) Assumptions for Ideal Behavior**\n- **Matched transistors**: $ M_1 $ and $ M_2 $ have identical $ W/L $ ratios and process parameters.\n- **Saturation region**: Both transistors are in saturation (requires $ V_{DD} $ sufficiently large).\n- **Negligible channel-length modulation**: Ignoring the Early effect for simplicity.\n\n---\n\n---\n\n## **3. Key Observations**\n| Parameter | Expression | Notes |\n|-----------|------------|-------|\n| $ I_{D2} $ | $ I_{\\text{in}} $ | Reference current |\n| $ I_{D1} $ | $ I_{\\text{in}} $ | Mirrored current (if matched and in saturation) |\n| $ V_{\\text{out}} $ | $ V_{DD} - I_{\\text{in}} R_{D1} $ | Output voltage |\n| $ V_X $ | $ V_{th} + \\sqrt{\\frac{2I_{\\text{in}}}{\\mu_n C_{ox} (W/L)}} $ | Gate voltage of $ M_1 $ and $ M_2 $ |\n\n---\n\n---\n\n## **4. Practical Implications**\n- This circuit **copies** the input current $ I_{\\text{in}} $ to the output branch (through $ M_1 $).\n- The output voltage $ V_{\\text{out}} $ is **inversely proportional** to $ I_{\\text{in}} $ (higher $ I_{\\text{in}} $ → lower $ V_{\\text{out}} $).\n- If $ I_{\\text{in}} R_{D1} > V_{DD} $, $ V_{\\text{out}} $ becomes negative (invalid for NMOS operation; requires $ V_{DD} $ to be sufficiently large).\n- **Applications**: Current mirrors are used in **biasing circuits**, **amplifiers**, and **analog ICs** to replicate currents precisely.\n\n---\n\n### **Final Summary**\nThis is a **simple NMOS current mirror** with a resistive load. Under ideal conditions (matched transistors, saturation operation), the output voltage is:\n$$\n\\boxed{V_{\\text{out}} = V_{DD} - I_{\\text{in}} \\cdot R_{D1}}\n$$\nThe circuit mirrors the input current $ I_{\\text{in}} $ to the output branch, and the output voltage depends on the voltage drop across $ R_{D1} $ due to this mirrored current.",
        "format": "markdown",
        "sha256": "9b2925e51866e463f49dd718d510fccc66529c66a800d7551f8618b0763350f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It treats M2 as diode-connected and describes a current mirror, missing the positive-feedback loop. It also misreads Iin as a reference current flowing through M2 rather than identifying the actual current-input behavior at X.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2250,
        "output_tokens": 2390,
        "total_tokens": 4640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 926,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2250,
        "output_tokens": 2390,
        "total_tokens": 4640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 926,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **current-to-voltage converter** using MOSFETs and a load resistor. Here's a step-by-step analysis:\n\n---\n\n### **Circuit Configuration**\n- **M1** and **M2** are NMOS transistors.\n- **I<sub>in</sub>** is a current source connected to the **source of M2**.\n- The **drain of M2** is connected to the **source of M1**.\n- The **drain of M1** is connected to **R<sub>D1</sub>** and **V<sub>out</sub>**, with **R<sub>D1</sub>** tied to **V<sub>DD</sub>**.\n- The **gate of M2** is connected to **node X**, which is the **drain of M1** (i.e., **V<sub>out</sub>**).\n\nThis forms a **feedback loop**:  \n- **V<sub>out</sub>** controls the gate of M2, which regulates the current through M2 and M1.\n\n---\n\n---\n\n### **Key Observations**\n1. **Current Flow**:\n   - The current source **I<sub>in</sub>** forces a constant current **I<sub>in</sub>** into the **source of M2**.\n   - For an NMOS transistor, current flows from **drain → source**, so **I<sub>D2</sub> = I<sub>in</sub>** (drain current of M2 = I<sub>in</sub>).\n   - This current flows into the **source of M1**, making **I<sub>D1</sub> = I<sub>in</sub>** (drain current of M1 = I<sub>in</sub>).\n\n2. **Voltage Across R<sub>D1</sub>**:\n   - The resistor **R<sub>D1</sub>** is in series with **V<sub>DD</sub>** and the drain of M1.\n   - The voltage drop across **R<sub>D1</sub>** is **I<sub>D1</sub> · R<sub>D1</sub> = I<sub>in</sub> · R<sub>D1</sub>**.\n   - Therefore, the output voltage is:\n     $$\n     V_{\\text{out}} = V_{DD} - I_{\\text{in}} \\cdot R_{D1}\n     $$\n\n3. **Feedback Mechanism**:\n   - The **gate of M2** is connected to **V<sub>out</sub>**, creating a feedback loop.\n   - This ensures that **M2** operates in **saturation** (for proper current mirroring) and maintains **I<sub>D2</sub> = I<sub>in</sub>**.\n   - The **gate-source voltage of M2** ($V_{GS2} = V_{\\text{out}} - V_{S2}$) adjusts dynamically to sustain the required current.\n\n4. **MOSFET Operating Region**:\n   - **M1** is **diode-connected** (if its gate is also tied to **V<sub>out</sub>**, as implied by the node X connection). This ensures it operates in saturation, acting as a **voltage reference** for the feedback loop.\n   - **M2** is in **saturation** due to the feedback from **V<sub>out</sub>**, ensuring its drain current matches **I<sub>in</sub>**.\n\n---\n\n---\n\n### **Final Output Voltage**\nAssuming **M1** and **M2** are properly biased in saturation (a valid assumption for typical operation), the circuit simplifies to a **current-controlled voltage source**:\n$$\n\\boxed{V_{\\text{out}} = V_{DD} - I_{\\text{in}} \\cdot R_{D1}}\n$$\n\n---\n\n---\n\n### **Key Takeaways**\n- The circuit **converts the input current I<sub>in</sub> into an output voltage V<sub>out</sub>** via the load resistor **R<sub>D1</sub>**.\n- The **feedback from V<sub>out</sub> to M2’s gate** ensures stable current flow through **M2** and **M1**, maintaining **I<sub>D1</sub> = I<sub>in</sub>**.\n- This configuration is commonly used in **current mirrors, transimpedance amplifiers, or bias circuits** where precise current-to-voltage conversion is required.\n\n**Note**: If the MOSFETs are not in saturation (e.g., due to small **V<sub>DD</sub>** or large **I<sub>in</sub>**), the analysis would involve solving quadratic equations for **V<sub>out</sub>** based on MOSFET saturation current equations. However, under standard operating conditions, the simplified linear relationship holds.",
        "format": "markdown",
        "sha256": "1303bd598ad552e373c89ea766c199a0d528f158c6306daaf7414837e0fc00ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misplaces the input current and misidentifies M1 and node X, then concludes the circuit is a stable current-to-voltage converter. It misses the actual positive-feedback instability or latching behavior.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2250,
        "output_tokens": 12970,
        "total_tokens": 15220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2250,
        "output_tokens": 12970,
        "total_tokens": 15220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To analyze the circuit in the figure, we first identify its **configuration** and **key components**:\n\n---\n\n### **🔹 Circuit Overview**\n- **Current Source**: $ I_{\\text{in}} $ (supplies current into node $ X $).\n- **Transistors**:\n  - $ M_2 $: NMOS with **source grounded**, **drain and gate connected to node $ X $** (diode-connected).\n  - $ M_1 $: PMOS with **gate connected to node $ X $**, **drain connected to $ R_{D1} $** (and $ V_{\\text{out}} $), and **source connected to $ V_{DD} $** (implied by standard PMOS operation).\n- **Resistor**: $ R_{D1} $ between $ V_{DD} $ and the drain of $ M_1 $.\n- **Output**: $ V_{\\text{out}} $ is taken at the drain of $ M_1 $.\n\n---\n\n---\n\n### **🔹 Step-by-Step Analysis**\n\n#### **1. Role of $ M_2 $: Diode-Connected Reference Transistor**\n- $ M_2 $ is **diode-connected** (gate and drain tied together at node $ X $), with its **source grounded**.\n- The **current source $ I_{\\text{in}} $** injects current into node $ X $, which flows through $ M_2 $ to ground. Thus, $ I_{D2} = I_{\\text{in}} $.\n- Assuming $ M_2 $ operates in **saturation**, the drain current is:\n  $$\n  I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{GS2} - V_{thn})^2\n  $$\n  Since $ V_{GS2} = V_X $ (gate voltage at node $ X $), we solve for $ V_X $:\n  $$\n  V_X = V_{thn} + \\sqrt{\\frac{2 I_{\\text{in}}}{\\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2}}\n  $$\n\n---\n\n#### **2. Role of $ M_1 $: Output Transistor**\n- $ M_1 $ is a **PMOS** transistor with:\n  - **Source** connected to $ V_{DD} $,\n  - **Gate** connected to node $ X $,\n  - **Drain** connected to $ R_{D1} $ and $ V_{\\text{out}} $.\n- The **gate-source voltage** for $ M_1 $ is:\n  $$\n  V_{SG1} = V_{DD} - V_X\n  $$\n- Assuming $ M_1 $ operates in **saturation**, the drain current is:\n  $$\n  I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{SG1} - |V_{thp}|)^2\n  $$\n  Substituting $ V_{SG1} = V_{DD} - V_X $:\n  $$\n  I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{DD} - V_X - |V_{thp}|)^2\n  $$\n\n---\n\n#### **3. Output Voltage $ V_{\\text{out}} $**\n- The output voltage $ V_{\\text{out}} $ is the voltage at the **drain of $ M_1 $**, which is:\n  $$\n  V_{\\text{out}} = V_{DD} - I_{D1} R_{D1}\n  $$\n- This equation shows that $ V_{\\text{out}} $ depends on:\n  - The **reference current $ I_{\\text{in}} $** (via $ V_X $),\n  - The **transistor dimensions** ($ W/L $),\n  - The **supply voltage $ V_{DD} $**,\n  - The **load resistor $ R_{D1} $**.\n\n---\n\n---\n\n### **🔹 Key Observations**\n1. **Current Mirror Behavior**:\n   - $ M_2 $ acts as a **reference transistor** to set the gate voltage $ V_X $ based on $ I_{\\text{in}} $.\n   - $ M_1 $ mirrors this behavior, with its drain current $ I_{D1} $ determined by the same gate voltage $ V_X $.\n   - This forms a **complementary current mirror** (NMOS reference + PMOS output).\n\n2. **Operating Regions**:\n   - Both transistors must be in **saturation** for the above equations to hold:\n     - For $ M_2 $: $ V_{DS2} = V_X \\geq V_{GS2} - V_{thn} $,\n     - For $ M_1 $: $ V_{SD1} = V_{DD} - V_{\\text{out}} \\geq V_{SG1} - |V_{thp}| $.\n\n3. **Output Voltage Dependence**:\n   - $ V_{\\text{out}} $ is **inversely proportional** to $ I_{D1} $, which itself depends on $ I_{\\text{in}} $.\n   - Increasing $ I_{\\text{in}} $ increases $ V_X $, reducing $ V_{SG1} $, thus decreasing $ I_{D1} $ and increasing $ V_{\\text{out}} $.\n\n---\n\n---\n\n### **🔹 Summary of Circuit Function**\nThis is a **current-controlled voltage source** or **current mirror-based amplifier**:\n- The **input current $ I_{\\text{in}} $** sets the gate voltage $ V_X $ via $ M_2 $.\n- The **output voltage $ V_{\\text{out}} $** is determined by the current $ I_{D1} $ through $ M_1 $ and the resistor $ R_{D1} $.\n- The circuit effectively converts an input current into an output voltage, with the relationship:\n  $$\n  V_{\\text{out}} = V_{DD} - \\left[ \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{DD} - V_X - |V_{thp}|)^2 \\right] R_{D1}\n  $$\n  where $ V_X $ is derived from $ I_{\\text{in}} $ as shown earlier.\n\n---\n\n### **🔹 Practical Implications**\n- If $ I_{\\text{in}} $ is **constant**, $ V_{\\text{out}} $ becomes a **fixed voltage** determined by $ R_{D1} $ and transistor parameters.\n- If $ I_{\\text{in}} $ varies, $ V_{\\text{out}} $ will vary accordingly, making this a **current-to-voltage converter**.\n- This configuration is commonly used in **biasing circuits**, **current mirrors**, and **amplifier stages** in analog IC design.\n\n---\n\n### ✅ **Final Answer**\nThe circuit is a **current-controlled voltage source** using a **complementary current mirror**:\n- $ M_2 $ (NMOS) is diode-connected and sets the gate voltage $ V_X $ based on $ I_{\\text{in}} $.\n- $ M_1 $ (PMOS) conducts a current $ I_{D1} $ determined by $ V_X $, leading to an output voltage:\n  $$\n  V_{\\text{out}} = V_{DD} - I_{D1} R_{D1}\n  $$\n  where $ I_{D1} $ depends on $ I_{\\text{in}} $, transistor dimensions, and threshold voltages. This structure is typically used for **biasing** or **current-to-voltage conversion** in analog circuits.",
        "format": "markdown",
        "sha256": "f217f9bbf55d071921106a27115b5a9e228bd2c2ae01806b7be53a3bb130f7aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats M2 as diode-connected, misses the positive-feedback loop, and also misidentifies M1 as a PMOS rather than the common-source NMOS in the circuit.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2250,
        "output_tokens": 8415,
        "total_tokens": 10665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2250,
        "output_tokens": 8415,
        "total_tokens": 10665,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the provided diagram is a **two-stage transimpedance amplifier (TIA)** designed to convert an input current $ I_{\\text{in}} $ into an output voltage $ V_{\\text{out}} $. Here's a detailed analysis of its operation:\n\n---\n\n---\n\n### **🔹 Circuit Overview**\n- **Input Stage**: A current source $ I_{\\text{in}} $ flows through resistor $ R_F $, generating a gate voltage for MOSFET $ M_1 $.\n- **First Stage (M₁)**: Acts as a **common-source amplifier** with source grounded. It converts the input voltage (from $ R_F $) into a drain current $ i_{D1} $, which flows through $ R_{D1} $, creating a voltage at node $ X $.\n- **Second Stage (M₂)**: A **common-source amplifier** with gate connected to node $ X $. Its drain current $ i_{D2} $ flows through $ R_{D2} $, producing the output voltage $ V_{\\text{out}} $.\n- **Capacitor at M₂’s Source**: Likely a **bypass capacitor** for AC stability (ignored in DC analysis).\n\n---\n\n---\n\n### **🔹 DC Analysis (Small-Signal Approximation)**\n\n#### **1. Input Stage (R_F and M₁)**\n- The input current $ I_{\\text{in}} $ flows through $ R_F $, creating a gate voltage for $ M_1 $:\n  $$\n  V_{G1} = I_{\\text{in}} \\cdot R_F\n  $$\n- Assuming $ M_1 $ is in **saturation**, its small-signal drain current is:\n  $$\n  i_{d1} = g_{m1} \\cdot v_{g1} = g_{m1} \\cdot (I_{\\text{in}} \\cdot R_F)\n  $$\n  where $ g_{m1} $ is the transconductance of $ M_1 $.\n\n#### **2. Node X (Drain of M₁)**\n- The voltage at node $ X $ is determined by the drop across $ R_{D1} $ due to $ i_{d1} $:\n  $$\n  v_X = -i_{d1} \\cdot R_{D1} = -g_{m1} \\cdot R_F \\cdot R_{D1} \\cdot I_{\\text{in}}\n  $$\n  (Negative sign indicates inversion due to common-source topology.)\n\n#### **3. Second Stage (M₂ and R_{D2})**\n- $ M_2 $’s gate voltage is $ v_X $, so its small-signal drain current is:\n  $$\n  i_{d2} = g_{m2} \\cdot v_X = -g_{m2} \\cdot g_{m1} \\cdot R_F \\cdot R_{D1} \\cdot I_{\\text{in}}\n  $$\n- The output voltage $ V_{\\text{out}} $ is the drop across $ R_{D2} $:\n  $$\n  V_{\\text{out}} = -i_{d2} \\cdot R_{D2} = g_{m1} \\cdot g_{m2} \\cdot R_F \\cdot R_{D1} \\cdot R_{D2} \\cdot I_{\\text{in}}\n  $$\n\n---\n\n---\n\n### **🔹 Key Observations**\n1. **Transimpedance Gain**:\n   The circuit behaves as a **transimpedance amplifier**, where the output voltage is proportional to the input current:\n   $$\n   \\boxed{V_{\\text{out}} = \\left( g_{m1} \\cdot g_{m2} \\cdot R_F \\cdot R_{D1} \\cdot R_{D2} \\right) \\cdot I_{\\text{in}}}\n   $$\n   - **Gain**: $ Z_T = g_{m1} \\cdot g_{m2} \\cdot R_F \\cdot R_{D1} \\cdot R_{D2} $ (in units of Ω).\n\n2. **Signal Flow**:\n   - $ I_{\\text{in}} \\rightarrow R_F \\rightarrow M_1 \\rightarrow R_{D1} \\rightarrow M_2 \\rightarrow R_{D2} \\rightarrow V_{\\text{out}} $\n   - Each stage amplifies the signal, with the final output voltage being a product of all transconductances and resistances.\n\n3. **Assumptions**:\n   - All MOSFETs operate in **saturation**.\n   - Small-signal approximation applies (valid for linear operation around a bias point).\n   - The capacitor at $ M_2 $’s source is a **bypass capacitor** (open in DC, short in AC).\n\n---\n\n---\n\n### **🔹 Circuit Function**\nThis is a **two-stage current-to-voltage converter (transimpedance amplifier)**. It is useful in applications like:\n- **Optical receivers** (converting photodiode current to voltage).\n- **Sensors** (e.g., photodetectors, bioelectric signals).\n- **Test and measurement** (e.g., current sensing).\n\nThe gain $ Z_T $ can be tuned by adjusting $ R_F $, $ R_{D1} $, $ R_{D2} $, or the transistor dimensions (which affect $ g_m $).\n\n---\n\n---\n\n### **🔹 Summary**\n| **Component**       | **Role**                                                                 |\n|----------------------|--------------------------------------------------------------------------|\n| $ I_{\\text{in}} $ | Input current source                                                    |\n| $ R_F $            | Converts $ I_{\\text{in}} $ to gate voltage for $ M_1 $               |\n| $ M_1 $            | First-stage common-source amplifier (current-to-voltage conversion)    |\n| $ R_{D1} $        | Load resistor for $ M_1 $, sets voltage at node $ X $               |\n| $ M_2 $            | Second-stage common-source amplifier (further amplification)         |\n| $ R_{D2} $        | Load resistor for $ M_2 $, sets output voltage $ V_{\\text{out}} $  |\n\n**Final Answer**:  \nThe circuit is a **two-stage transimpedance amplifier** that converts input current $ I_{\\text{in}} $ to output voltage $ V_{\\text{out}} $ with a **transimpedance gain** of:\n$$\n\\boxed{V_{\\text{out}} = \\left( g_{m1} \\cdot g_{m2} \\cdot R_F \\cdot R_{D1} \\cdot R_{D2} \\right) \\cdot I_{\\text{in}}}\n$$\nwhere $ g_{m1} $ and $ g_{m2} $ are the transconductances of $ M_1 $ and $ M_2 $, respectively.",
        "format": "markdown",
        "sha256": "ceb9d78d596ab8012f57865ae7adfa798838a6c507a8bf1e04f8b3b9575b4d21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes a two-stage transimpedance amplifier and correctly identifies M2 as a common-source stage driven by X, but misreads M1 as a grounded-source device and treats RF as an input resistor rather than feedback from Vout to the input node. Its positive gain expression therefore misses the circuit’s essential feedback mechanism and transimpedance behavior.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 11446,
        "total_tokens": 14008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 11446,
        "total_tokens": 14008,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9989,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **bias-stabilized current mirror with active load**, commonly used in analog IC design for precise current replication and biasing. Here's a detailed analysis:\n\n---\n\n### **🔍 Circuit Identification**\n- **M₁ (NMOS)**: Acts as the **reference transistor** for the current mirror.  \n  - **Source** is driven by current source $ I_{\\text{in}} $ through resistor $ R_F $.  \n  - **Gate** is biased at $ V_b $ (external bias voltage).  \n  - **Drain** (node $ X $) connects to $ R_{D1} $ and the gate of $ M_2 $.  \n- **M₂ (PMOS)**: Acts as the **output transistor** of the mirror.  \n  - **Source** connects to $ V_{DD} $ via $ R_{D2} $.  \n  - **Gate** is driven by node $ X $ (drain of $ M_1 $).  \n  - **Drain** outputs $ V_{\\text{out}} $.  \n- **Resistors $ R_{D1} $, $ R_{D2} $**: Serve as **load resistors** for $ M_1 $ and $ M_2 $, respectively.  \n- **$ R_F $**: Converts the input current $ I_{\\text{in}} $ into a voltage to bias $ M_1 $.  \n\n---\n\n---\n\n### **📊 Key Assumptions**\n1. **Transistor Operation**:  \n   - $ M_1 $ (NMOS) operates in **saturation** (for current mirror accuracy).  \n   - $ M_2 $ (PMOS) operates in **saturation** (to act as a current source).  \n2. **Matching**: $ M_1 $ and $ M_2 $ are **matched** (same $ W/L $, $ V_{th} $, etc.) for ideal current mirroring.  \n3. **Negligible Gate Current**: Gate currents of $ M_1 $ and $ M_2 $ are assumed zero (standard for MOSFETs in analog circuits).  \n\n---\n\n---\n\n### **⚙️ Step-by-Step Analysis**\n\n#### **1. Reference Current Path (M₁)**\n- The current source $ I_{\\text{in}} $ flows **upward** through $ R_F $, so:  \n  $$\n  V_{S1} = I_{\\text{in}} \\cdot R_F \\quad \\text{(Voltage at M₁'s source)}\n  $$\n- Gate-source voltage of $ M_1 $:  \n  $$\n  V_{GS1} = V_b - V_{S1} = V_b - I_{\\text{in}} R_F\n  $$\n- **Drain current of $ M_1 $** (in saturation):  \n  $$\n  I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{GS1} - V_{th,n})^2\n  $$\n  Since $ I_{D1} $ flows through $ R_{D1} $, the drain voltage (node $ X $) is:  \n  $$\n  V_X = V_{DD} - I_{D1} R_{D1}\n  $$\n\n#### **2. Output Current Path (M₂)**\n- **Gate voltage of $ M_2 $**: $ V_X = V_{DD} - I_{D1} R_{D1} $.  \n- **Source voltage of $ M_2 $**: $ V_{S2} = V_{DD} - I_{D2} R_{D2} $ (current $ I_{D2} $ flows from $ V_{DD} $ through $ R_{D2} $).  \n- **Gate-source voltage of $ M_2 $** (PMOS):  \n  $$\n  V_{SG2} = V_{S2} - V_X = (V_{DD} - I_{D2} R_{D2}) - (V_{DD} - I_{D1} R_{D1}) = I_{D1} R_{D1} - I_{D2} R_{D2}\n  $$\n- **Drain current of $ M_2 $** (in saturation):  \n  $$\n  I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{SG2} - |V_{th,p}|)^2\n  $$\n\n#### **3. Ideal Current Mirroring (Matched Transistors)**\nIf $ M_1 $ and $ M_2 $ are **matched** ($ \\mu_n C_{ox} (W/L)_1 = \\mu_p C_{ox} (W/L)_2 $, $ V_{th,n} = |V_{th,p}| $) and $ R_{D1} = R_{D2} = R_D $, then:  \n- From $ V_{SG2} = I_{D1} R_D - I_{D2} R_D $, and assuming $ I_{D1} \\approx I_{\\text{in}} $ (if $ M_1 $ is in saturation with $ V_{GS1} $ set by $ V_b $), we get:  \n  $$\n  I_{D2} \\approx I_{D1} = I_{\\text{in}} \\quad \\text{(for ideal mirroring)}\n  $$\n- **Output voltage**:  \n  $$\n  V_{\\text{out}} = V_{S2} - V_{SD2} \\approx V_{DD} - I_{D2} R_{D2} - (V_{SG2} - |V_{th,p}|)\n  $$\n  For simplicity, if $ R_{D2} = 0 $ (ideal case), $ V_{\\text{out}} = V_{DD} - (I_{D2} R_{D1} - |V_{th,p}|) $.\n\n---\n\n---\n\n### **🎯 Circuit Function**\nThis is a **current mirror with active load**, where:\n1. **$ I_{\\text{in}} $** sets the reference current via $ R_F $ and $ M_1 $.  \n2. **$ M_1 $** converts $ I_{\\text{in}} $ into a **gate voltage** at node $ X $.  \n3. **$ M_2 $** replicates $ I_{\\text{in}} $ (scaled by $ W/L $ ratios) as $ I_{D2} $, with $ V_{\\text{out}} $ determined by $ R_{D2} $ and $ I_{D2} $.  \n\n#### **Key Features**:\n- **High Output Impedance**: Due to $ M_2 $ operating in saturation, $ V_{\\text{out}} $ behaves like a **current source**.  \n- **Bias Stability**: $ R_F $ and $ V_b $ ensure $ M_1 $ operates in saturation, improving mirror accuracy.  \n- **Scalability**: Current ratio $ I_{D2}/I_{\\text{in}} $ can be controlled by $ (W/L)_2/(W/L)_1 $.\n\n---\n\n---\n\n### **📉 Output Voltage Expression**\nFor **matched transistors** ($ R_{D1} = R_{D2} = R_D $) and **ideal mirroring** ($ I_{D2} = I_{\\text{in}} $):  \n$$\nV_{\\text{out}} \\approx V_{DD} - I_{\\text{in}} R_D - (I_{\\text{in}} R_D - |V_{th,p}|) = V_{DD} - 2 I_{\\text{in}} R_D + |V_{th,p}|\n$$  \n*(This assumes $ M_2 $ is in saturation and $ R_{D2} \\neq 0 $.)*\n\n---\n\n---\n\n### **⚠️ Design Considerations**\n1. **Saturation Conditions**:  \n   - For $ M_1 $: $ V_{DS1} = V_X - V_{S1} \\geq V_{GS1} - V_{th,n} $.  \n   - For $ M_2 $: $ V_{SD2} \\geq V_{SG2} - |V_{th,p}| $.  \n2. **Bias Voltage $ V_b $**: Must be chosen such that $ V_{GS1} > V_{th,n} $ (e.g., $ V_b = V_{S1} + V_{th,n} + V_{OV} $, where $ V_{OV} $ is overdrive voltage).  \n3. **Resistor Values**:  \n   - $ R_F $ sets the source voltage of $ M_1 $.  \n   - $ R_{D1}, R_{D2} $ trade off output swing vs. current accuracy.\n\n---\n\n---\n\n### **🔚 Summary**\n| **Component** | **Role**                          | **Key Equation**                          |\n|---------------|-----------------------------------|-------------------------------------------|\n| $ I_{\\text{in}} $ | Reference current input          | $ V_{S1} = I_{\\text{in}} R_F $          |\n| $ M_1 $       | Reference transistor (NMOS)      | $ I_{D1} = \\frac{1}{2} k_n (V_{GS1} - V_{th,n})^2 $ |\n| $ M_2 $       | Output transistor (PMOS)         | $ I_{D2} \\approx I_{D1} $ (if matched) |\n| $ R_{D1}, R_{D2} $ | Load resistors               | $ V_X = V_{DD} - I_{D1} R_{D1} $        |\n| $ V_{\\text{out}} $ | Output voltage               | $ V_{\\text{out}} = V_{DD} - I_{D2} R_{D2} - V_{SD2} $ |\n\n**Primary Function**: **Current mirror with active load**, used for **biasing, current replication, or as a building block in amplifiers/oscillators**.  \n**Ideal Behavior**: $ I_{D2} \\propto I_{\\text{in}} $, with $ V_{\\text{out}} $ acting as a **current-controlled voltage** (if $ R_{D2} \\neq 0 $) or **current source** (if $ R_{D2} = 0 $).",
        "format": "markdown",
        "sha256": "63733da3e811f74fe3cdf984917a44c379b150f83a740ad8dffc014f1dd77d1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes M1’s gate bias and that node X drives M2, but fundamentally misidentifies the circuit as a current mirror. It misstates M2’s type and connections and misses RF feedback from Vout to the input, so it does not analyze the transimpedance amplifier.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2562,
        "output_tokens": 10989,
        "total_tokens": 13551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2562,
        "output_tokens": 10989,
        "total_tokens": 13551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure is a **MOSFET-based Current Conveyor (CCII-)**. Below is a detailed analysis of its structure, operation, and key characteristics:\n\n---\n\n---\n\n### **🔍 Circuit Structure & Component Roles**\n- **Transistors**:  \n  - **$ M_1 $**: NMOS transistor with its **gate** driven by the input current source $ I_{\\text{in}} $ via resistor $ R_F $, and its **source** connected to a bias voltage $ V_b $.  \n  - **$ M_2 $**: NMOS transistor with its **gate** connected to node $ X $ (drain of $ M_1 $), **source** grounded, and **drain** connected to $ R_{D2} $ and output $ V_{\\text{out}} $.  \n\n- **Resistors**:  \n  - $ R_F $: Feedback resistor between $ I_{\\text{in}} $ and the gate of $ M_1 $.  \n  - $ R_{D1}, R_{D2} $: Load resistors for $ M_1 $ and $ M_2 $, respectively.  \n\n- **Power Supply**: $ V_{DD} $ powers the drain resistors.  \n- **Bias Voltage**: $ V_b $ sets the operating point of $ M_1 $ (ensuring saturation).  \n\n---\n\n---\n\n### **📌 Circuit Operation: Current Conveyor (CCII-)**\nThis circuit implements a **Current Conveyor Type II (CCII-)**. A CCII has three ports:\n- **Port X**: High-impedance input (current-controlled).  \n- **Port Y**: High-impedance output (voltage-controlled, $ V_Y = V_X $).  \n- **Port Z**: Low-impedance output (current-controlled, $ I_Z = -I_X $).  \n\nIn this configuration:\n- **Node $ X $** acts as **Port X** (current input).  \n- **Gate of $ M_2 $** (node $ X $) also acts as **Port Y** (voltage follows $ V_X $).  \n- **Drain of $ M_2 $** (output $ V_{\\text{out}} $) acts as **Port Z** (current output).  \n\n#### **Key CCII- Properties**\n1. **Voltage at Port Y = Voltage at Port X**:  \n   $$\n   V_Y = V_X\n   $$  \n   Here, $ V_Y $ is the gate voltage of $ M_2 $, which equals $ V_X $ (drain of $ M_1 $).  \n\n2. **Current at Port Z = -Current at Port X**:  \n   $$\n   I_Z = -I_X\n   $$  \n   The current through $ R_{D1} $ (at node $ X $) is mirrored to $ M_2 $, with a sign inversion due to NMOS operation.\n\n---\n\n---\n\n### **🧮 DC Analysis (Saturation Region)**\nAssume both transistors are in **saturation** (valid for typical bias conditions).  \n\n#### **1. Input Stage ($ M_1 $)**\n- **Gate Voltage**:  \n  The current $ I_{\\text{in}} $ flows through $ R_F $, so:  \n  $$\n  V_{\\text{gate},M1} = I_{\\text{in}} \\cdot R_F \\quad \\text{(assuming $ R_F $ is grounded on the other side)}\n  $$  \n- **Gate-Source Voltage**:  \n  $$\n  V_{GS1} = V_{\\text{gate},M1} - V_b = I_{\\text{in}} \\cdot R_F - V_b\n  $$  \n- **Drain Current of $ M_1 $**:  \n  $$\n  I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{GS1} - V_{th})^2\n  $$  \n  where $ V_{th} $ is the threshold voltage of $ M_1 $.  \n\n- **Voltage at Node $ X $**:  \n  $$\n  V_X = V_{DD} - I_{D1} \\cdot R_{D1}\n  $$\n\n#### **2. Output Stage ($ M_2 $)**\n- **Gate Voltage**: $ V_X $ (from $ M_1 $'s drain).  \n- **Gate-Source Voltage**:  \n  $$\n  V_{GS2} = V_X - 0 = V_X\n  $$  \n- **Drain Current of $ M_2 $**:  \n  $$\n  I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{GS2} - V_{th})^2\n  $$  \n- **Output Voltage**:  \n  $$\n  V_{\\text{out}} = V_{DD} - I_{D2} \\cdot R_{D2}\n  $$\n\n#### **3. Current Conveyor Behavior**\n- **Current at Port X ($ I_X $)**:  \n  $$\n  I_X = I_{D1} = \\frac{V_{DD} - V_X}{R_{D1}}\n  $$  \n- **Current at Port Z ($ I_Z $)**:  \n  $$\n  I_Z = -I_{D2} = -\\left( \\frac{V_{DD} - V_{\\text{out}}}{R_{D2}} \\right)\n  $$  \n  For a **matched current conveyor** ($ (W/L)_1 = (W/L)_2 $, $ R_{D1} = R_{D2} $), we get:  \n  $$\n  I_Z \\approx -I_X\n  $$  \n  This satisfies the **CCII-** property: $ I_Z = -I_X $.\n\n- **Voltage at Port Y ($ V_Y $)**:  \n  $$\n  V_Y = V_X \\quad \\text{(since $ V_Y $ is the gate of $ M_2 $)}\n  $$  \n  This satisfies $ V_Y = V_X $, another key CCII property.\n\n---\n\n---\n\n### **🔄 Feedback Mechanism**\nThe resistor $ R_F $ provides **negative feedback** to stabilize the circuit:\n- The input current $ I_{\\text{in}} $ sets the gate voltage of $ M_1 $.  \n- $ M_1 $’s drain current ($ I_{D1} $) is mirrored to $ M_2 $, and the output voltage $ V_{\\text{out}} $ is determined by $ I_{D2} \\cdot R_{D2} $.  \n- The feedback ensures that the **current at node $ X $** (Port X) is proportional to $ I_{\\text{in}} $, and the **voltage at node $ X $** (Port Y) is maintained.\n\n---\n\n---\n\n### **📊 Small-Signal Analysis (Linearized)**\nFor small-signal variations (e.g., $ i_{\\text{in}} $):\n- **Transconductance of $ M_1 $**: $ g_{m1} = \\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_{D1}} $  \n- **Voltage at $ X $**: $ v_X = -g_{m1} \\cdot R_{D1} \\cdot (i_{\\text{in}} \\cdot R_F) $  \n- **Transconductance of $ M_2 $**: $ g_{m2} = \\sqrt{2 \\mu_n C_{ox} (W/L)_2 I_{D2}} $  \n- **Output Voltage**:  \n  $$\n  v_{\\text{out}} = -g_{m2} \\cdot R_{D2} \\cdot v_X = g_{m1} g_{m2} R_F R_{D1} R_{D2} \\cdot i_{\\text{in}}\n  $$  \n  This shows **high gain** for small signals, but the **feedback via $ R_F $** linearizes the response and stabilizes the circuit.\n\n---\n\n---\n\n### **✅ Key Takeaways**\n| **Property**               | **Behavior**                                                                 |\n|----------------------------|-----------------------------------------------------------------------------|\n| **Type**                   | **CCII- (Current Conveyor Type II)**                                        |\n| **Port X (Node $ X $)**    | High-impedance current input ($ I_X = I_{D1} $)                            |\n| **Port Y (Gate of $ M_2 $)** | High-impedance voltage output ($ V_Y = V_X $)                             |\n| **Port Z (Output $ V_{\\text{out}} $)** | Low-impedance current output ($ I_Z = -I_X $)                              |\n| **Feedback**               | $ R_F $ stabilizes the circuit and enforces $ I_X \\propto I_{\\text{in}} $ |\n| **Gain**                   | Small-signal: $ v_{\\text{out}} \\propto i_{\\text{in}} $ (transimpedance)     |\n| **Biasing**                | $ V_b $ ensures $ M_1 $ operates in saturation.                             |\n\n---\n\n---\n\n### **🎯 Practical Applications**\n1. **Current Mode Signal Processing**:  \n   - Ideal for **current-mode filters**, **analog signal processing**, and **sensor interfaces** (e.g., photodiodes).  \n2. **Transimpedance Amplifier (TIA)**:  \n   - If $ R_F $ is part of a feedback loop (e.g., connected from $ V_{\\text{out}} $ to the input), it can function as a TIA with gain $ \\approx -R_F $.  \n3. **Current Mirror with Feedback**:  \n   - The CCII structure can be used to implement **high-precision current mirrors** with improved linearity.  \n\n---\n\n---\n\n### **📌 Summary**\nThis circuit is a **MOSFET-based Current Conveyor (CCII-)** that:\n- **Copies current** from Port X (node $ X $) to Port Z (output $ V_{\\text{out}} $) with a sign inversion ($ I_Z = -I_X $).  \n- **Maintains voltage equality** between Port X and Port Y (gate of $ M_2 $).  \n- Uses **feedback via $ R_F $** to stabilize the input current and ensure linear operation.  \n- Can be adapted for **transimpedance amplification** or **current-mode signal processing** depending on external connections.  \n\nFor a **transimpedance amplifier**, ensure $ R_F $ is part of a feedback loop from $ V_{\\text{out}} $ to the input. For a **pure CCII**, the circuit as drawn already satisfies the CCII- properties.",
        "format": "markdown",
        "sha256": "4c76a13d9c21b3fe84c21b31aa0afead17791d96db024fb5e4aacf52130bf7a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1’s gate and source connections, places RF incorrectly, and calls the circuit a CCII rather than recognizing the transimpedance feedback path. It correctly places M2’s gate at X, but that limited correct detail does not rescue the central analysis.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2562,
        "output_tokens": 11184,
        "total_tokens": 13746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8820,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2562,
        "output_tokens": 11184,
        "total_tokens": 13746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8820,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **current mirror** configuration using two MOSFETs (M₁ and M₂) with an input current source $ I_{\\text{in}} $ and an output current source $ I_1 $. Despite the unusual gate connection of M₂ (connected to its own source via M₁'s drain), the circuit can be analyzed under the assumption that it functions as a **diode-connected current mirror** with a bias voltage $ V_b $, though the gate connection of M₂ suggests a **cascode-like structure** or a mislabeled diagram. Here’s the step-by-step analysis:\n\n---\n\n---\n\n### **🔹 Circuit Interpretation**\n- **M₁ and M₂** are assumed to be **NMOS transistors** (standard for current mirrors in analog IC design).\n- **V_DD** is the positive supply voltage.\n- **I_in** is a current source connected to the **source of M₁**, forcing a current $ I_{\\text{in}} $ through M₁.\n- **I_1** is a current source connected to **V_DD** and the **drain of M₂**, sinking current $ I_1 $.\n- **M₁'s gate** is biased by $ V_b $, while **M₂'s gate** is connected to **M₁'s drain** (node X).\n- **M₂'s source** is also connected to **M₁'s drain** (node X), so $ V_{GS2} = 0 $, which **turns off M₂** if taken literally.\n\nHowever, this leads to a **contradiction** (M₂ cannot conduct), implying either:\n1. A **mislabeling** in the diagram (e.g., M₂'s gate should connect to $ V_b $, not M₁'s drain), or\n2. The circuit is a **modified current mirror** where M₂ acts as a **cascode transistor** with a hidden bias.\n\nAssuming the **intended design** is a **standard current mirror** (with M₂'s gate connected to $ V_b $), the analysis proceeds as follows.\n\n---\n\n---\n\n### **🔹 Assumed Corrected Configuration**\nTo resolve the contradiction, assume:\n- **M₂'s gate is connected to $ V_b $** (not M₁'s drain).\n- This forms a **basic current mirror** where:\n  - M₁ is the **reference transistor** (with $ I_{\\text{in}} $ as its drain current).\n  - M₂ is the **output transistor**, with its gate tied to $ V_b $ (same as M₁’s gate).\n\nThis is the **most plausible interpretation** for a functional current mirror.\n\n---\n\n---\n\n### **🔹 Key Equations for Current Mirror**\nFor **NMOS transistors in saturation**:\n$$\nI_D = \\frac{1}{2} \\mu C_{ox} \\frac{W}{L} (V_{GS} - V_{TH})^2\n$$\n\n#### **For M₁ (Reference Transistor)**\n- Gate voltage: $ V_b $\n- Source voltage: $ V_{S1} $ (set by $ I_{\\text{in}} $)\n- Gate-source voltage: $ V_{GS1} = V_b - V_{S1} $\n- Drain current: $ I_{\\text{in}} = \\frac{1}{2} \\mu C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_{GS1} - V_{TH})^2 $\n\n#### **For M₂ (Output Transistor)**\n- Gate voltage: $ V_b $ (same as M₁)\n- Source voltage: $ V_{S2} $ (connected to M₁’s drain)\n- Gate-source voltage: $ V_{GS2} = V_b - V_{S2} $\n- Drain current: $ I_1 = \\frac{1}{2} \\mu C_{ox} \\left( \\frac{W}{L} \\right)_2 (V_{GS2} - V_{TH})^2 $\n\nIf **M₁ and M₂ are matched** ($ \\frac{W}{L}_1 = \\frac{W}{L}_2 $) and **$ V_{GS1} = V_{GS2} $**, then:\n$$\nI_1 = I_{\\text{in}}\n$$\n\n---\n\n---\n\n### **🔹 Output Voltage $ V_{\\text{out}} $**\n- $ V_{\\text{out}} $ is the **drain voltage of M₂**.\n- The current source $ I_1 $ is connected between $ V_{DD} $ and M₂’s drain, so:\n  $$\n  V_{\\text{out}} = V_{DD} - V_{DS2}\n  $$\n  where $ V_{DS2} $ is the drain-source voltage of M₂.\n\nIn **saturation**, $ V_{DS2} \\geq V_{GS2} - V_{TH} $. If $ I_1 = I_{\\text{in}} $, then:\n$$\nV_{GS2} = V_{GS1} = V_b - V_{S1}\n$$\nand $ V_{DS2} $ adjusts to maintain $ I_1 $.\n\nThus, $ V_{\\text{out}} $ is **determined by the compliance voltage** of the current source $ I_1 $ and the operating region of M₂.\n\n---\n\n---\n\n### **🔹 Special Case: Cascode Interpretation**\nIf the **original diagram is correct** (M₂’s gate connected to M₁’s drain), then:\n- M₂’s **gate and source are at the same node** (node X), so $ V_{GS2} = 0 $.\n- This **turns off M₂**, making $ I_1 = 0 $, which contradicts the presence of $ I_1 $.\n\n**Conclusion**: The circuit as drawn is **non-functional** due to M₂ being off. However, if we assume a **typo** (M₂’s gate connected to $ V_b $), it becomes a **standard current mirror** with:\n$$\nI_1 = I_{\\text{in}} \\cdot \\frac{(W/L)_2}{(W/L)_1}\n$$\nand $ V_{\\text{out}} $ is set by the load and $ V_{DD} $.\n\n---\n\n---\n\n### **🔹 Final Analysis Summary**\n| **Parameter**       | **Expression**                                                                 |\n|----------------------|-------------------------------------------------------------------------------|\n| **M₁ Drain Current** | $ I_{\\text{in}} = \\frac{1}{2} \\mu C_{ox} \\left( \\frac{W}{L} \\right)_1 (V_b - V_{S1} - V_{TH})^2 $ |\n| **M₂ Drain Current** | $ I_1 = I_{\\text{in}} \\cdot \\frac{(W/L)_2}{(W/L)_1} $ (if matched, $ I_1 = I_{\\text{in}} $) |\n| **Output Voltage**   | $ V_{\\text{out}} = V_{DD} - V_{DS2} $, where $ V_{DS2} \\geq V_{GS2} - V_{TH} $ |\n| **Operating Region** | Both transistors in **saturation** (for proper current mirroring)               |\n\n---\n\n---\n\n### **🔹 Key Observations**\n1. **Current Mirroring**: The circuit copies $ I_{\\text{in}} $ to $ I_1 $, scaled by the $ W/L $ ratio of M₂ to M₁.\n2. **Bias Voltage $ V_b $**: Must be set such that $ V_{GS1} > V_{TH} $ to keep M₁ in saturation.\n3. **Output Voltage**: Depends on $ V_{DD} $ and the compliance voltage of $ I_1 $. For ideal current sources, $ V_{\\text{out}} $ adjusts to maintain $ I_1 $.\n4. **Critical Issue**: If M₂’s gate is truly connected to its source (as drawn), the circuit **does not function** (M₂ is off). This suggests a **diagram error**—likely, M₂’s gate should connect to $ V_b $.\n\n---\n\n---\n\n### **🔹 Conclusion**\nThe circuit is **intended to be a current mirror**, where:\n- $ I_1 = I_{\\text{in}} \\cdot \\frac{(W/L)_2}{(W/L)_1} $,\n- $ V_{\\text{out}} $ is determined by $ V_{DD} $ and the load conditions,\n- **$ V_b $** must be chosen to ensure both transistors operate in saturation.\n\n**If the diagram is accurate (M₂’s gate connected to its source), the circuit is non-functional.** However, assuming a **typo** (M₂’s gate connected to $ V_b $), it functions as a **standard current mirror**.\n\n> **Final Answer**:  \n> The circuit is a **current mirror** where $ I_1 = I_{\\text{in}} \\cdot \\frac{(W/L)_2}{(W/L)_1} $ (assuming matched transistors, $ I_1 = I_{\\text{in}} $). The output voltage $ V_{\\text{out}} $ is set by $ V_{DD} $ and the compliance voltage of $ I_1 $. **If M₂’s gate is truly connected to its source (as drawn), the circuit is non-functional due to M₂ being off.** A likely correction is that M₂’s gate connects to $ V_b $, forming a standard current mirror.",
        "format": "markdown",
        "sha256": "ab399d512c26bb33d1244e07178a1ace77bd3fc0ade3b76a0d6445b94f281b11"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a current mirror, treats M2 as an NMOS with its gate tied to its source, and misses the PMOS feedback path and low-input-resistance current-buffer behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2409,
        "output_tokens": 14541,
        "total_tokens": 16950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2409,
        "output_tokens": 14541,
        "total_tokens": 16950,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12497,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the provided diagram is a **complementary current mirror** with **current subtraction functionality**, utilizing one **PMOS (M₂)** and one **NMOS (M₁)** transistor, along with two current sources ($I_{\\text{in}}$ and $I_1$) and a bias voltage $V_b$. Below is a detailed analysis:\n\n---\n\n---\n\n### **🔹 Circuit Topology & Key Components**\n- **M₂ (PMOS)**: Source connected to $V_{DD}$, drain to output node $V_{\\text{out}}$, gate tied to $V_b$.\n- **M₁ (NMOS)**: Drain connected to $V_{\\text{out}}$, source connected to current source $I_{\\text{in}}$ (which sinks current from ground to M₁’s source), gate tied to $V_b$.\n- **Current Sources**:\n  - $I_{\\text{in}}$: Flows **into** the source of M₁ (from ground).\n  - $I_1$: Flows **from $V_{DD}$ to $V_{\\text{out}}$** (arrow points downward).\n- **Bias Voltage $V_b$**: Applied to the gates of both M₁ and M₂.\n\n---\n\n---\n\n### **🔹 Current Relationships (KCL at $V_{\\text{out}}$)**\nAt the output node $V_{\\text{out}}$, Kirchhoff’s Current Law (KCL) applies:\n\n$$\nI_1 + I_{D2} = I_{D1}\n$$\n\nWhere:\n- $I_{D1}$ = Drain current of M₁ (NMOS) = $I_{\\text{in}}$ (since $I_{\\text{in}}$ is the current **into** M₁’s source).\n- $I_{D2}$ = Drain current of M₂ (PMOS).\n\n**Solving for $I_{D2}$**:\n$$\nI_{D2} = I_{\\text{in}} - I_1\n$$\n\n✅ **Key Insight**: The circuit **subtracts** $I_1$ from $I_{\\text{in}}$, producing an output current $I_{D2} = I_{\\text{in}} - I_1$ through M₂.\n\n---\n\n---\n\n### **🔹 Transistor Operating Regions**\nAssume both transistors are in **saturation** (valid for most analog applications):\n\n#### **For M₁ (NMOS)**:\n- Drain current:  \n  $$\n  I_{D1} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left( \\frac{W}{L} \\right)_1 (V_{GS1} - V_{\\text{thn}})^2\n  $$\n- $V_{GS1} = V_b - V_{S1}$, where $V_{S1}$ is the source voltage of M₁.\n- **Saturation condition**:  \n  $$\n  V_{DS1} \\geq V_{GS1} - V_{\\text{thn}} \\quad \\Rightarrow \\quad V_{\\text{out}} - V_{S1} \\geq (V_b - V_{S1}) - V_{\\text{thn}} \\quad \\Rightarrow \\quad V_{\\text{out}} \\geq V_b - V_{\\text{thn}}\n  $$\n\n#### **For M₂ (PMOS)**:\n- Drain current:  \n  $$\n  I_{D2} = \\frac{1}{2} \\mu_p C_{\\text{ox}} \\left( \\frac{W}{L} \\right)_2 (V_{SG2} - |V_{\\text{thp}}|)^2\n  $$\n- $V_{SG2} = V_{DD} - V_b$\n- **Saturation condition**:  \n  $$\n  V_{SD2} \\geq V_{SG2} - |V_{\\text{thp}}| \\quad \\Rightarrow \\quad V_{DD} - V_{\\text{out}} \\geq (V_{DD} - V_b) - |V_{\\text{thp}}| \\quad \\Rightarrow \\quad V_{\\text{out}} \\leq V_b + |V_{\\text{thp}}|\n  $$\n\n✅ **Combined Saturation Range for $V_{\\text{out}}$**:\n$$\nV_b - V_{\\text{thn}} \\leq V_{\\text{out}} \\leq V_b + |V_{\\text{thp}}|\n$$\n\n---\n\n---\n\n### **🔹 Bias Voltage $V_b$ Determination**\nFrom the current equations and KCL:\n\n1. **For M₁**:  \n   $$\n   I_{\\text{in}} = \\frac{1}{2} \\mu_n C_{\\text{ox}} \\left( \\frac{W}{L} \\right)_1 (V_b - V_{S1} - V_{\\text{thn}})^2\n   $$\n\n2. **For M₂**:  \n   $$\n   I_{\\text{in}} - I_1 = \\frac{1}{2} \\mu_p C_{\\text{ox}} \\left( \\frac{W}{L} \\right)_2 (V_{DD} - V_b - |V_{\\text{thp}}|)^2\n   $$\n\n**Solving for $V_b$**:\n$$\nV_b = V_{DD} - |V_{\\text{thp}}| - \\sqrt{\\frac{2(I_{\\text{in}} - I_1)}{\\mu_p C_{\\text{ox}} (W/L)_2}}\n$$\n\n✅ **Note**: This assumes $I_{\\text{in}} > I_1$ (otherwise, $I_{D2}$ would be negative, implying M₂ is in triode or cutoff).\n\n---\n\n---\n\n### **🔹 Output Voltage $V_{\\text{out}}$**\nThe output voltage $V_{\\text{out}}$ is determined by the **voltage drop across M₂** (PMOS) and M₁ (NMOS). In saturation:\n\n- For M₂:  \n  $$\n  V_{\\text{out}} = V_{DD} - V_{SD2}, \\quad \\text{where } V_{SD2} \\geq V_{SG2} - |V_{\\text{thp}}|\n  $$\n\n- For M₁:  \n  $$\n  V_{\\text{out}} = V_{S1} + V_{DS1}, \\quad \\text{where } V_{DS1} \\geq V_{GS1} - V_{\\text{thn}}\n  $$\n\n**Exact value of $V_{\\text{out}}$** depends on the specific transistor parameters and currents, but it must lie within the saturation range derived earlier.\n\n---\n\n---\n\n### **🔹 Circuit Functionality Summary**\n| **Feature**               | **Description**                                                                 |\n|---------------------------|---------------------------------------------------------------------------------|\n| **Type**                  | Complementary current mirror with current subtraction.                        |\n| **Input Current**         | $I_{\\text{in}}$ (sourced into M₁’s source).                                   |\n| **Output Current**        | $I_{D2} = I_{\\text{in}} - I_1$ (through M₂).                                  |\n| **Bias Voltage $V_b$**    | Sets the gate-source voltages for both transistors to maintain saturation.     |\n| **Output Voltage $V_{\\text{out}}$** | Determined by $V_b$, $V_{DD}$, and transistor parameters.                  |\n| **Saturation Conditions** | $V_b - V_{\\text{thn}} \\leq V_{\\text{out}} \\leq V_b + |V_{\\text{thp}}|$. |\n\n---\n\n---\n\n### **🔹 Practical Implications**\n- **Current Subtraction**: The circuit effectively **subtracts** $I_1$ from $I_{\\text{in}}$, making it useful in **differential current sensing** or **biasing networks**.\n- **Biasing Flexibility**: $V_b$ can be externally adjusted to control the operating point of both transistors.\n- **Output Resistance**: High (due to saturation), making it suitable for **current-mode applications**.\n- **Limitations**:\n  - Requires $I_{\\text{in}} > I_1$ for M₂ to remain in saturation.\n  - Output voltage $V_{\\text{out}}$ is constrained by the saturation conditions.\n\n---\n\n---\n\n### **🔹 Example Scenario**\nSuppose:\n- $V_{DD} = 5\\,\\text{V}$, $I_{\\text{in}} = 10\\,\\mu\\text{A}$, $I_1 = 4\\,\\mu\\text{A}$\n- M₂: $\\mu_p C_{\\text{ox}} (W/L)_2 = 100\\,\\mu\\text{A/V}^2$, $|V_{\\text{thp}}| = 1\\,\\text{V}$\n\nThen:\n$$\nV_b = 5 - 1 - \\sqrt{\\frac{2(10 - 4)}{100}} = 4 - \\sqrt{0.12} \\approx 3.35\\,\\text{V}\n$$\n$$\nI_{D2} = 10 - 4 = 6\\,\\mu\\text{A}\n$$\n\nThis ensures M₂ operates in saturation, and $V_{\\text{out}}$ will settle within the valid range.\n\n---\n\n---\n\n### **✅ Final Answer**\nThe circuit is a **complementary current mirror with current subtraction**. It uses **M₁ (NMOS)** and **M₂ (PMOS)** with gates biased at $V_b$ to produce an output current $I_{D2} = I_{\\text{in}} - I_1$ at node $V_{\\text{out}}$. The bias voltage $V_b$ is set to maintain both transistors in saturation, and $V_{\\text{out}}$ lies within the range $V_b - V_{\\text{thn}} \\leq V_{\\text{out}} \\leq V_b + |V_{\\text{thp}}|$. This configuration is useful for **current subtraction, biasing, or differential current sensing** in analog IC design.",
        "format": "markdown",
        "sha256": "8fbdb2e6b40910f97f12e272a42dc6ce499a05b588230d9b17ce36b907d30807"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology: M2’s gate is driven by Vout and its drain feeds back to the input node, not a gate-biased current-mirror device connected to the output. It misses the feedback loop and low-input-resistance current-buffer behavior, instead deriving an unrelated current-subtraction result.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2409,
        "output_tokens": 10548,
        "total_tokens": 12957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2409,
        "output_tokens": 10548,
        "total_tokens": 12957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **current-mirror-based transimpedance amplifier** or **current conveyor**, utilizing two PMOS transistors (M₁ and M₂) to convert an input current (*I<sub>in</sub>*) into an output voltage (*V<sub>out</sub>*). Below is a detailed analysis:\n\n---\n\n---\n\n### **🔍 Circuit Components & Topology**\n1. **Transistors**:\n   - **M₂**: PMOS with **source = V<sub>DD</sub>**, **drain = node X**, and **gate = node X** (diode-connected).\n   - **M₁**: PMOS with **source = V<sub>b</sub>**, **drain = node X**, and **gate = node X** (same gate as M₂).\n\n2. **Current Sources**:\n   - **I₁**: Flows **from V<sub>DD</sub> to node X** (arrow downward).\n   - **I<sub>in</sub>**: Flows **from ground to node X** (arrow upward).\n\n3. **Output**: *V<sub>out</sub>* is the voltage at **node X**.\n\n---\n\n---\n\n### **⚙️ Assumptions for Analysis**\n- Both M₁ and M₂ are **PMOS** in **saturation** (valid for typical current mirror operation).\n- The **gate of both transistors is tied to node X** (diode-connected M₂, M₁ shares the same gate voltage).\n- Transistor parameters:  \n  - *μ<sub>p</sub>C<sub>ox</sub>*: Mobility-capacitance product for PMOS.  \n  - *(W/L)<sub>M₂</sub>*, *(W/L)<sub>M₁</sub>*: Width-to-length ratios of M₂ and M₁.  \n  - *|V<sub>th</sub>|*: Threshold voltage magnitude for PMOS.\n\n---\n\n---\n\n### **📐 Key Equations**\n\n#### **1. Current Through M₂ (Diode-Connected)**\nFor a PMOS in saturation:\n$$\nI_{M₂} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_{M₂} (V_{SG} - |V_{th}|)^2\n$$\nHere, $ V_{SG} = V_{DD} - V_x $, where $ V_x = V_{out} $. Thus:\n$$\nI_{M₂} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_{M₂} (V_{DD} - V_{out} - |V_{th}|)^2 \\tag{1}\n$$\n\n#### **2. Current Through M₁**\nFor M₁, $ V_{SG} = V_b - V_{out} $, so:\n$$\nI_{M₁} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_{M₁} (V_b - V_{out} - |V_{th}|)^2 \\tag{2}\n$$\n\n#### **3. Kirchhoff’s Current Law (KCL) at Node X**\nAt node X, the sum of currents entering must equal the sum leaving:\n- **Entering**: *I<sub>in</sub>* (from ground), *I₁* (from V<sub>DD</sub> via I₁).\n- **Leaving**: *I<sub>M₁</sub>* (to V<sub>b</sub>), *I<sub>M₂</sub>* (to V<sub>DD</sub>).\n\nThus:\n$$\nI_{in} + I_1 = I_{M₁} + I_{M₂} \\tag{3}\n$$\n\n---\n\n---\n\n### **📉 Behavior & Output Voltage**\n#### **Case 1: Ideal Current Mirror (V<sub>b</sub> = V<sub>DD</sub>)**\nIf *V<sub>b</sub> = V<sub>DD</sub>*, then $ V_{SG,M₁} = V_{SG,M₂} $, and:\n$$\nI_{M₁} = I_{M₂} \\cdot \\frac{(W/L)_{M₁}}{(W/L)_{M₂}} \\tag{4}\n$$\nThis is a **standard current mirror** with a scaling factor of $ \\frac{(W/L)_{M₁}}{(W/L)_{M₂}} $. The output voltage *V<sub>out</sub>* adjusts to satisfy Equation (3).\n\n#### **Case 2: General Case (V<sub>b</sub> ≠ V<sub>DD</sub>)**\n- If *V<sub>b</sub> > V<sub>out</sub> + |V<sub>th</sub>|*, both transistors operate in saturation.\n- From Equation (3), *V<sub>out</sub>* is determined implicitly by:\n  $$\n  I_{in} + I_1 = \\frac{1}{2} \\mu_p C_{ox} \\left[ \\left(\\frac{W}{L}\\right)_{M₁} (V_b - V_{out} - |V_{th}|)^2 + \\left(\\frac{W}{L}\\right)_{M₂} (V_{DD} - V_{out} - |V_{th}|)^2 \\right]\n  $$\n  This is a **quadratic equation in *V<sub>out</sub>*** and can be solved numerically for a given *I<sub>in</sub>*, *I₁*, *V<sub>b</sub>*, and transistor dimensions.\n\n---\n\n---\n\n### **🎯 Functionality Summary**\n- **Purpose**: Converts an input current (*I<sub>in</sub>*) into a proportional output voltage (*V<sub>out</sub>*) using a **PMOS current mirror**.\n- **Key Insight**: The circuit **regulates *V<sub>out</sub>*** such that the total current through M₁ and M₂ balances *I<sub>in</sub> + I₁*.\n- **Applications**:\n  - **Transimpedance Amplifier**: Converts current (e.g., from a photodiode) to voltage.\n  - **Current Conveyor**: Copies or scales currents in analog signal processing.\n  - **Biasing Circuit**: Provides stable reference currents in ICs.\n\n---\n\n---\n\n### **⚠️ Limitations & Considerations**\n1. **Transistor Region of Operation**:  \n   - M₂ and M₁ must remain in **saturation** for the mirror to work accurately. This requires:\n     $$\n     V_{DD} - V_{out} > |V_{th}|, \\quad V_b - V_{out} > |V_{th}|\n     $$\n2. **Channel-Length Modulation**:  \n   - For higher accuracy, include **channel-length modulation** (λ) in the current equations.\n3. **Matching Errors**:  \n   - In practice, mismatches in *V<sub>th</sub>*, *μ<sub>p</sub>C<sub>ox</sub>*, or *(W/L)* introduce errors in current mirroring.\n\n---\n\n---\n\n### **📌 Final Answer**\nThis circuit is a **PMOS current mirror** with:\n- **M₂** (diode-connected) as the **reference transistor**,\n- **M₁** as the **output transistor**,\n- **I₁** as the **reference current**,\n- **I<sub>in</sub>** as the **input current**.\n\nThe **output voltage *V<sub>out</sub>*** is dynamically adjusted to satisfy **KCL at node X**, ensuring:\n$$\nI_{in} + I_1 = I_{M₁} + I_{M₂}\n$$\nwhere $ I_{M₁} $ and $ I_{M₂} $ depend on *V<sub>out</sub>*, *V<sub>b</sub>*, and transistor parameters. For ideal matching (*V<sub>b</sub> = V<sub>DD</sub>*), the circuit mirrors *I₁* to *I<sub>M₁</sub>* with a scaling factor of $ \\frac{(W/L)_{M₁}}{(W/L)_{M₂}} $. In general, *V<sub>out</sub>* is solved implicitly from the quadratic current balance equation.",
        "format": "markdown",
        "sha256": "755fdad103b2a4360c475a1ecdade4fab48b0c912cd225bf8dadc5778f29df62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads both devices as PMOS and invents a diode-connected current mirror. It misses the common-gate NMOS input device, the PMOS feedback path from Vout to the input node, and the circuit’s low input resistance/transimpedance behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2409,
        "output_tokens": 16674,
        "total_tokens": 19083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2409,
        "output_tokens": 16674,
        "total_tokens": 19083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether the circuit fails to oscillate when the three capacitors become arbitrarily large, we need to analyze the behavior of the circuit under these conditions. The circuit in question is a ring oscillator with three inverters, each followed by a capacitor to ground.\n\n### Circuit Behavior Analysis\n\n1. **Ring Oscillator Basics**:\n   - A ring oscillator with an odd number of stages (in this case, three) will oscillate because the feedback is negative at DC, leading to instability and oscillation.\n   - The oscillation frequency is determined by the delay through each stage. For a ring oscillator with \\( N \\) stages, the oscillation frequency \\( f_{osc} \\) is approximately given by:\n     \\[\n     f_{osc} \\approx \\frac{1}{2N \\tau_d}\n     \\]\n     where \\( \\tau_d \\) is the delay per stage.\n\n2. **Delay per Stage**:\n   - The delay \\( \\tau_d \\) for each inverter stage is proportional to the load capacitance \\( C_L \\). Specifically, \\( \\tau_d \\approx C_L / I \\), where \\( I \\) is the current drive of the inverter.\n   - If \\( C_L \\) is arbitrarily large, \\( \\tau_d \\) becomes arbitrarily large, leading to an arbitrarily low oscillation frequency.\n\n3. **Oscillation Condition**:\n   - For oscillation to occur, the loop gain must be at least 1, and the phase shift around the loop must be 180 degrees (for negative feedback).\n   - In a ring oscillator with three stages, the phase shift per stage must be 60 degrees to achieve a total phase shift of 180 degrees.\n\n4. **Effect of Large Capacitors**:\n   - As \\( C_L \\) increases, the delay \\( \\tau_d \\) increases, causing the oscillation frequency to decrease.\n   - In the limit as \\( C_L \\to \\infty \\), the delay \\( \\tau_d \\to \\infty \\), and the oscillation frequency \\( f_{osc} \\to 0 \\).\n\n5. **Static State**:\n   - When \\( C_L \\) is arbitrarily large, the capacitors act as perfect integrators, meaning the voltage across them cannot change for any finite current.\n   - This implies that the output of each inverter is fixed, and the circuit remains in a static state, unable to transition between states.\n\n### Conclusion\n\nIn the limit as \\( C_L \\to \\infty \\), the circuit's ability to change state is lost because the time constant becomes infinite. Therefore, the circuit does not oscillate.\n\n\\[\n\\boxed{\\text{Yes, the circuit fails to oscillate if the three capacitors become arbitrarily large.}}\n\\]",
        "format": "markdown",
        "sha256": "2294c8a9f394804c420fa0d9af792f836c05cc97c5dc043326047a22bd71627e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitors increase delay and lower frequency, but concludes that the ring fails to oscillate. The central result is that it continues oscillating at a lower frequency; the static-state argument is incorrect.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1321,
        "output_tokens": 7414,
        "total_tokens": 8735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1321,
        "output_tokens": 7414,
        "total_tokens": 8735,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6854,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether the circuit fails to oscillate when the three capacitors become arbitrarily large, we need to analyze the behavior of the circuit in the context of a ring oscillator.\n\nA ring oscillator consists of an odd number of inverters connected in a loop. In this case, the circuit has three inverters, each with a capacitor at its output. The capacitors introduce a delay in the signal propagation through each inverter stage. The oscillation frequency of the ring oscillator is inversely proportional to the total delay around the loop, which is the sum of the delays introduced by each inverter and its associated capacitor.\n\nThe delay per stage, \\(\\tau\\), can be approximated as \\(\\tau = R \\cdot C_L\\), where \\(R\\) is the effective resistance of the inverter and \\(C_L\\) is the load capacitance. For three stages, the total delay is \\(3\\tau\\). The oscillation frequency \\(f\\) is given by:\n\\[ f = \\frac{1}{2 \\cdot 3 \\cdot \\tau} = \\frac{1}{6 \\cdot R \\cdot C_L} \\]\n\nAs \\(C_L\\) becomes arbitrarily large, the delay per stage \\(\\tau\\) increases, leading to a decrease in the oscillation frequency \\(f\\). However, as long as \\(C_L\\) is finite, the frequency \\(f\\) remains non-zero, and the circuit continues to oscillate, albeit at a very low frequency.\n\nIn the limit as \\(C_L\\) approaches infinity, the frequency \\(f\\) approaches zero, but for any finite \\(C_L\\), the circuit still oscillates. Therefore, the circuit does not fail to oscillate when the capacitors become arbitrarily large; it simply oscillates at a very low frequency.\n\nThus, the answer is:\nNo, the circuit does not fail to oscillate. As the capacitors become arbitrarily large, the oscillation frequency approaches zero but remains non-zero for any finite \\(C_L\\). The circuit continues to oscillate, just at a very low frequency.",
        "format": "markdown",
        "sha256": "f103657d4ce3f6d27bb71f33d5782d4c9e79ad2a4706381aa26d75592f1180d7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors on all three stages slow the ring oscillator without stopping it for any finite capacitance. The delay-based explanation is sufficient under the full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1321,
        "output_tokens": 7553,
        "total_tokens": 8874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1321,
        "output_tokens": 7553,
        "total_tokens": 8874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7156,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether the circuit fails to oscillate when the three capacitors become arbitrarily large, we need to analyze the behavior of the ring oscillator under these conditions.\n\nA ring oscillator consists of an odd number of inverter stages connected in a loop. In this case, there are three inverter stages, each with a capacitor \\( C_L \\) to ground. The oscillation frequency of a ring oscillator is determined by the propagation delay through each stage, which is influenced by the load capacitance \\( C_L \\).\n\nThe propagation delay \\( \\tau \\) for each inverter stage can be approximated as \\( \\tau \\approx \\frac{C_L \\cdot R}{2} \\), where \\( R \\) is the effective resistance of the inverter. The oscillation frequency \\( f \\) of the ring oscillator is given by \\( f \\approx \\frac{1}{2N\\tau} \\), where \\( N \\) is the number of stages (in this case, \\( N = 3 \\)).\n\nAs \\( C_L \\) increases, the propagation delay \\( \\tau \\) increases, leading to a decrease in the oscillation frequency \\( f \\). However, for any finite \\( C_L \\), the frequency \\( f \\) remains non-zero. Therefore, the circuit will still oscillate, albeit at a very low frequency.\n\nThe Barkhausen criterion for oscillation requires that the loop gain is greater than or equal to 1 and the total phase shift around the loop is 0 degrees (or 360 degrees, etc.). For a ring oscillator with an odd number of stages, the phase shift condition is satisfied, and the loop gain is typically greater than 1, ensuring oscillation.\n\nIn summary, as \\( C_L \\) becomes arbitrarily large, the oscillation frequency approaches zero but remains non-zero for any finite \\( C_L \\). Therefore, the circuit does not fail to oscillate; it simply oscillates at a very low frequency.\n\n**Final Answer:**\nNo, the circuit does **not** fail to oscillate. Even with arbitrarily large \\( C_L \\), the oscillation frequency approaches zero but remains non-zero for any finite \\( C_L \\), so the circuit still oscillates (albeit extremely slowly). Only in the unphysical limit \\( C_L \\to \\infty \\) would the frequency become zero, but this does not constitute a failure to oscillate in practical or theoretical terms for finite (though arbitrarily large) \\( C_L \\).",
        "format": "markdown",
        "sha256": "938cc08790cfaa592d996b19897bd406dfdd449e308272d1b5ede2c704162b60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency as the capacitors increase, supported by the delay argument. This satisfies the full-credit rule.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1321,
        "output_tokens": 5779,
        "total_tokens": 7100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1321,
        "output_tokens": 5779,
        "total_tokens": 7100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a **ring oscillator** with three inverters and load capacitors \\( C_L \\), the oscillation frequency \\( f_{\\text{osc}} \\) is inversely proportional to \\( C_L \\), as the delay per stage \\( \\tau \\propto C_L \\) and \\( f_{\\text{osc}} \\approx \\frac{1}{2N\\tau} \\) (where \\( N = 3 \\) for this circuit). Thus, **doubling \\( C_L \\) halves the oscillation frequency**.\n\n---\n\n### **Phase Noise Dependence on \\( C_L \\)**\nPhase noise in ring oscillators is primarily determined by **thermal noise** and the **slew rate** of the waveform transitions. The key relationship is:\n\n$$\nL(\\Delta f) \\propto \\left( f_{\\text{osc}} \\cdot \\sigma_t \\right)^2\n$$\n\nWhere:\n- \\( \\sigma_t \\): RMS timing jitter (in seconds),\n- \\( f_{\\text{osc}} \\): Oscillation frequency.\n\n#### **1. Timing Jitter (\\( \\sigma_t \\))**\nThe jitter arises from thermal noise and is inversely proportional to the **slew rate** \\( \\frac{dv}{dt} \\). For a CMOS inverter with load \\( C_L \\):\n- Transition time \\( \\tau \\propto C_L \\),\n- Slew rate \\( \\frac{dv}{dt} \\propto \\frac{V_{DD}}{\\tau} \\propto \\frac{1}{C_L} \\),\n- Thermal noise voltage \\( v_n \\propto \\sqrt{\\frac{kT}{C_L}} \\).\n\nThus, the jitter:\n$$\n\\sigma_t = \\frac{v_n}{\\text{slew rate}} \\propto \\sqrt{C_L}\n$$\n\n#### **2. Frequency Dependence**\nSince \\( f_{\\text{osc}} \\propto \\frac{1}{C_L} \\), the product:\n$$\nf_{\\text{osc}} \\cdot \\sigma_t \\propto \\frac{1}{C_L} \\cdot \\sqrt{C_L} = \\frac{1}{\\sqrt{C_L}}\n$$\n\nSquaring this gives:\n$$\nL(\\Delta f) \\propto \\left( \\frac{1}{\\sqrt{C_L}} \\right)^2 = \\frac{1}{C_L}\n$$\n\n---\n\n### **Effect of Doubling \\( C_L \\)**\nIf all three capacitors are doubled:\n- \\( C_L \\rightarrow 2C_L \\),\n- \\( f_{\\text{osc}} \\rightarrow \\frac{f_{\\text{osc}}}{2} \\),\n- \\( \\sigma_t \\rightarrow \\sigma_t \\cdot \\sqrt{2} \\),\n- \\( f_{\\text{osc}} \\cdot \\sigma_t \\rightarrow \\frac{f_{\\text{osc}}}{2} \\cdot \\sigma_t \\cdot \\sqrt{2} = \\frac{f_{\\text{osc}} \\cdot \\sigma_t}{\\sqrt{2}} \\),\n- \\( L(\\Delta f) \\propto \\left( \\frac{f_{\\text{osc}} \\cdot \\sigma_t}{\\sqrt{2}} \\right)^2 = \\frac{L(\\Delta f)}{2} \\).\n\nThus, **phase noise is halved**, which corresponds to a **3 dB improvement** (since \\( 10 \\log_{10}(2) \\approx 3 \\, \\text{dB} \\)).\n\n---\n\n### ✅ Final Answer:\n**Doubling the three capacitors \\( C_L \\) reduces phase noise by 3 dB.**  \nThis is because phase noise in a ring oscillator scales inversely with \\( C_L \\), and halving the phase noise (a factor of 2) corresponds to a 3 dB decrease.",
        "format": "markdown",
        "sha256": "2d38bb50cac671dd5cc0a36177f04fac59c0cf09edf96bccd4d34a2309d77206"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly says doubling the capacitors halves the oscillation frequency and lowers phase noise, but gives the wrong magnitude: at a fixed offset frequency, the phase noise falls by about a factor of four (6 dB), not two (3 dB).",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 7366,
        "total_tokens": 8685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 7366,
        "total_tokens": 8685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the effect of **doubling the capacitors $ C_L $** in a ring oscillator on **phase noise**, we analyze the relationship between load capacitance, oscillation frequency, and phase noise behavior.\n\n---\n\n### 🔍 **Key Observations**\n\n1. **Oscillation Frequency**:\n   - In a ring oscillator with $ N $ stages, the oscillation frequency is inversely proportional to the delay per stage.\n   - The delay $ \\tau $ of each stage (e.g., an inverter) is proportional to $ C_L $, assuming constant current $ I $:\n     $$\n     \\tau \\propto C_L \\quad \\Rightarrow \\quad f_{\\text{osc}} \\propto \\frac{1}{C_L}\n     $$\n   - Therefore, **doubling $ C_L $ halves the oscillation frequency** $ f_{\\text{osc}} $.\n\n2. **Timing Jitter**:\n   - Phase noise is closely tied to **timing jitter** $ \\sigma_t $, which arises from thermal noise in the circuit.\n   - For a capacitor $ C_L $, the thermal noise voltage has a variance $ \\propto \\frac{kT}{C_L} $.\n   - The slew rate $ \\frac{dV}{dt} \\propto \\frac{I}{C_L} $, so the timing jitter due to this noise is:\n     $$\n     \\sigma_t \\propto \\frac{\\sqrt{kT/C_L}}{I/C_L} = \\sqrt{\\frac{kT C_L}{I^2}} \\quad \\Rightarrow \\quad \\sigma_t \\propto \\sqrt{C_L}\n     $$\n   - Thus, **doubling $ C_L $ increases timing jitter by $ \\sqrt{2} $**.\n\n3. **Phase Noise Relationship**:\n   - The **rms phase deviation** $ \\phi_{\\text{rms}} $ is related to timing jitter and frequency:\n     $$\n     \\phi_{\\text{rms}} = 2\\pi f_{\\text{osc}} \\cdot \\sigma_t\n     $$\n   - Substituting $ f_{\\text{osc}} \\propto \\frac{1}{C_L} $ and $ \\sigma_t \\propto \\sqrt{C_L} $, we get:\n     $$\n     \\phi_{\\text{rms}} \\propto \\frac{1}{C_L} \\cdot \\sqrt{C_L} = \\frac{1}{\\sqrt{C_L}}\n     $$\n   - Therefore, **$ \\phi_{\\text{rms}} \\propto \\frac{1}{\\sqrt{C_L}} $**.\n\n4. **Phase Noise Power Spectral Density**:\n   - In the **1/Δf² region** (close-in phase noise), the single-sided phase noise $ L(\\Delta f) $ is proportional to $ \\phi_{\\text{rms}}^2 $:\n     $$\n     L(\\Delta f) \\propto \\left( \\frac{1}{\\sqrt{C_L}} \\right)^2 = \\frac{1}{C_L}\n     $$\n   - So, **phase noise is inversely proportional to $ C_L $**.\n\n---\n\n### ✅ **Conclusion**\n\nIf the **three capacitors $ C_L $** in the ring oscillator are **doubled**, then:\n\n- The **oscillation frequency halves**.\n- The **timing jitter increases by $ \\sqrt{2} $**.\n- However, the **phase noise decreases by a factor of 2**, or equivalently, **improves by 3 dB**.\n\nThis is because phase noise in the 1/Δf² region scales as $ \\frac{1}{C_L} $, and doubling $ C_L $ reduces it by half.\n\n---\n\n### 📌 Final Answer\n\n**Doubling the three capacitors $ C_L $ in the ring oscillator reduces the phase noise by 3 dB (i.e., halves the phase noise in the 1/Δf² region).**",
        "format": "markdown",
        "sha256": "dcac855a979c61d22d61c7f9a293ef82c5cc35d6ab86c3b689d233080f88f3ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly says doubling the capacitors halves the oscillation frequency and predicts a decrease in phase noise, but gives the wrong magnitude: at a fixed offset frequency the phase noise falls by about a factor of four (6 dB), not two (3 dB).",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 7664,
        "total_tokens": 8983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 7664,
        "total_tokens": 8983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6838,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise of a ring oscillator is determined by the **impulse sensitivity function (ISF)** and the relationship between the noise current, charge swing, and oscillation frequency. For a ring oscillator with load capacitors $ C_L $, the key parameters are:\n\n- **Oscillation frequency**: $ f_0 \\propto \\frac{1}{C_L} $ (since delay per stage increases with $ C_L $).\n- **Charge swing**: $ q_{\\text{max}} = C_L V_{DD} \\propto C_L $.\n- **Angular frequency**: $ \\omega_0 = 2\\pi f_0 \\propto \\frac{1}{C_L} $.\n\nThe phase noise in the white-noise region (dominated by thermal noise) is given by:\n$$\nL(\\Delta f) \\propto \\left( \\frac{\\overline{i_n^2 / \\Delta f}}{q_{\\text{max}} \\omega_0} \\right)^2 \\cdot \\frac{1}{(\\Delta f)^2}\n$$\nwhere $ \\overline{i_n^2 / \\Delta f} $ is the noise current spectral density (assumed constant for fixed transistor sizes), and $ \\Gamma_{\\text{rms}} $ (the RMS value of the ISF) is approximately constant for a symmetric ring oscillator.\n\nNow, consider the product $ q_{\\text{max}} \\omega_0 $:\n$$\nq_{\\text{max}} \\omega_0 \\propto C_L \\cdot \\frac{1}{C_L} = \\text{constant}\n$$\nThis means that **doubling $ C_L $** scales both $ q_{\\text{max}} $ and $ \\omega_0 $ in such a way that their product remains unchanged. As a result, the term $ \\frac{\\overline{i_n^2 / \\Delta f}}{q_{\\text{max}} \\omega_0} $ remains constant, and so does the phase noise $ L(\\Delta f) $.\n\n---\n\n### Intuitive Explanation:\n- Increasing $ C_L $ slows down the oscillator (lower $ f_0 $), which would *intuitively* suggest worse phase noise.\n- However, the larger $ C_L $ also increases the **charge swing** $ q_{\\text{max}} $, which improves the signal's resilience to noise.\n- These two effects cancel each other out: the reduced frequency is offset by the increased charge swing, keeping the **phase noise constant**.\n\n---\n\n### Final Answer:\n**Doubling the capacitors in the ring oscillator does not change the phase noise.**  \nThe phase noise remains **unchanged** because the increase in load capacitance (which slows the oscillator) is exactly compensated by the corresponding increase in charge swing, maintaining the same noise-to-signal ratio in the phase domain.",
        "format": "markdown",
        "sha256": "bf79674aee73769de9e824eabd9f2002541badb6dd1fc92a2607b0d3f5edde10"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly predicts unchanged phase noise. At a fixed offset frequency, doubling the capacitors halves the oscillation frequency and lowers phase noise by about a factor of four; the unchanged result applies only at a fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 13769,
        "total_tokens": 15088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1319,
        "output_tokens": 13769,
        "total_tokens": 15088,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13192,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine if the circuit in the figure will fail to oscillate when \\( C_L \\) becomes very large, we need to analyze the behavior of the ring oscillator under the influence of the capacitor \\( C_L \\).\n\nA ring oscillator consists of an odd number of inverters connected in a loop. In this case, there are three inverters, and the capacitor \\( C_L \\) is connected to the output of the second inverter and grounded. The capacitor \\( C_L \\) acts as a load on the second inverter, affecting its propagation delay and gain.\n\nThe oscillation frequency of a ring oscillator is determined by the total delay around the loop. Each inverter contributes a delay, and the total delay is the sum of the delays of all inverters. The presence of \\( C_L \\) increases the delay of the second inverter because it has to charge and discharge the capacitor, which takes more time as \\( C_L \\) increases.\n\nThe gain of the second inverter is also affected by \\( C_L \\). The gain of an inverter driving a capacitive load is inversely proportional to the load capacitance. As \\( C_L \\) increases, the gain of the second inverter decreases. This reduction in gain affects the overall loop gain of the oscillator.\n\nFor oscillation to occur, the loop gain must be at least 1, and the total phase shift around the loop must be 0 degrees (or 360 degrees, etc.). As \\( C_L \\) increases, the gain of the second inverter decreases, leading to a decrease in the overall loop gain. When \\( C_L \\) becomes arbitrarily large, the gain of the second inverter approaches zero, causing the loop gain to drop below 1. This violates the Barkhausen criterion, which states that the loop gain must be at least 1 for sustained oscillation.\n\nTherefore, as \\( C_L \\) becomes arbitrarily large, the circuit will fail to oscillate because the loop gain will be insufficient to sustain oscillation.",
        "format": "markdown",
        "sha256": "c9a63e147c1477dc75e921c94db47ad01c55a32cb8fb15038d6203a45b5e2177"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large CL can stop oscillation and explains that loading reduces loop gain below the Barkhausen requirement. The gain explanation is simplified, but captures the essential loading and gain-rolloff mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1263,
        "output_tokens": 6926,
        "total_tokens": 8189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6526,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1263,
        "output_tokens": 6926,
        "total_tokens": 8189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6526,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether the circuit fails to oscillate when \\( C_L \\) becomes arbitrarily large, we need to analyze the behavior of the circuit as \\( C_L \\) increases. The circuit consists of three inverters in series, with a capacitor \\( C_L \\) connected from the input of the first inverter to ground. The output of the third inverter is connected back to the input of the first inverter, forming a feedback loop.\n\nIn a ring oscillator with an odd number of inverters, the circuit oscillates if the loop gain is greater than or equal to 1 and the phase shift around the loop is 180 degrees (for negative feedback to become positive). The loop gain is the product of the gains of each inverter at the oscillation frequency.\n\nWhen \\( C_L \\) is a load capacitor at the input of the first inverter, it increases the time constant of the first inverter. As \\( C_L \\) becomes arbitrarily large, the time constant of the first inverter also becomes very large. This means that the frequency at which the phase shift condition is met (total phase shift of 180 degrees) decreases. However, at this lower frequency, the gain of the first inverter decreases because the gain of an inverter is higher at lower frequencies but still finite.\n\nIn the asymmetric case where one stage (the first inverter) has a much larger time constant due to \\( C_L \\), the loop gain at the oscillation frequency decreases as \\( C_L \\) increases. When \\( C_L \\) is large enough, the loop gain drops below 1, and the circuit fails to oscillate.\n\nTherefore, the circuit fails to oscillate when \\( C_L \\) becomes arbitrarily large.",
        "format": "markdown",
        "sha256": "37204b03305ddff7b7cc97d4fbcb817cff222642570c7c5e16fa08b2e24527a5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion and the key idea that the one-node load creates a large time constant and eventually drives loop gain below unity are correct. However, the explanation incorrectly says inverter gain falls because the oscillation frequency falls; that gain-versus-frequency reasoning is misleading.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1263,
        "output_tokens": 17645,
        "total_tokens": 18908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1263,
        "output_tokens": 17645,
        "total_tokens": 18908,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether the circuit fails to oscillate when the load capacitance \\( C_L \\) becomes arbitrarily large, we need to analyze the behavior of a ring oscillator, which is the type of circuit described. A ring oscillator typically consists of an odd number of inverters connected in a loop, and in this case, there are three inverters.\n\nIn a ring oscillator, the oscillation frequency is determined by the total delay around the loop. Each inverter contributes a delay, and the total delay is the sum of the delays of all the inverters. The frequency of oscillation can be approximated by the formula \\( f \\approx \\frac{1}{2N\\tau} \\), where \\( N \\) is the number of stages (inverters) and \\( \\tau \\) is the delay per stage.\n\nIn this circuit, the first inverter has a load capacitance \\( C_L \\) connected to its output. The delay of an inverter is proportional to the load capacitance it drives. Therefore, as \\( C_L \\) increases, the delay of the first inverter increases, which in turn increases the total delay around the loop. Consequently, the oscillation frequency decreases.\n\nHowever, the key point is that as long as the inverters are active and can switch, the circuit will continue to oscillate, albeit at a lower frequency. The oscillation condition for a ring oscillator with an odd number of stages is satisfied because the total phase shift around the loop is 180 degrees, which is equivalent to positive feedback. This means that the circuit will oscillate as long as the inverters can drive the load capacitance, which they can, even if the delay is very large.\n\nTherefore, even when \\( C_L \\) becomes arbitrarily large, the circuit does not fail to oscillate; it simply oscillates at a very low frequency. The circuit will continue to oscillate as long as \\( C_L \\) is finite, and the frequency will approach zero as \\( C_L \\) approaches infinity, but it will never stop oscillating.\n\nIn conclusion, the circuit does not fail to oscillate when \\( C_L \\) becomes arbitrarily large. It will continue to oscillate, but at a very low frequency.",
        "format": "markdown",
        "sha256": "a4e3341faa79aa3a3b62f39ee613bbeeed387b89aff8c377bad66ae0f0eccc6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result: a sufficiently large load on one node can create a dominant pole and prevent oscillation. The answer notes that loading increases delay and lowers frequency, but incorrectly assumes oscillation must continue and misses the loop-gain and phase failure.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1263,
        "output_tokens": 3330,
        "total_tokens": 4593,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2885,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1263,
        "output_tokens": 3330,
        "total_tokens": 4593,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2885,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths of both NMOS and PMOS devices in a **CMOS ring oscillator** are doubled, the **phase noise decreases by 3 dB**. Here's the reasoning:\n\n---\n\n### **Key Concepts in Phase Noise for Ring Oscillators**\nPhase noise in a ring oscillator is primarily governed by **thermal noise** from the transistors and the **energy stored per cycle** in the circuit. A widely used model for phase noise in such oscillators (especially in the $1/f^2$ region) is:\n\n$$\nL(\\Delta \\omega) \\propto \\frac{kT}{C \\cdot V_{\\text{swing}}^2} \\cdot \\frac{1}{\\Delta \\omega^2}\n$$\n\nWhere:\n- $kT$ is thermal energy,\n- $C$ is the effective capacitance at each node (e.g., input capacitance of the next stage),\n- $V_{\\text{swing}}$ is the output voltage swing (typically limited by $V_{DD}$),\n- $\\Delta \\omega$ is the offset frequency from the carrier.\n\n---\n\n### **Effect of Doubling Device Widths**\n\n1. **Capacitance ($C$)**:\n   - The gate capacitance of a MOSFET is proportional to its width: $C \\propto W$.\n   - Doubling the width of all transistors **doubles the load capacitance** seen by each stage (since the input capacitance of the next stage scales with width).\n\n2. **Voltage Swing ($V_{\\text{swing}}$)**:\n   - In a standard CMOS inverter-based ring oscillator, the output swing is limited by $V_{DD}$ and does **not** scale with device width. Thus, $V_{\\text{swing}}$ remains approximately constant.\n\n3. **Energy per Cycle**:\n   - The energy stored in the capacitance during one cycle is:\n     $$\n     E \\propto C \\cdot V_{\\text{swing}}^2\n     $$\n   - Doubling $C$ **doubles the energy per cycle**, assuming $V_{\\text{swing}}$ is unchanged.\n\n4. **Signal-to-Noise Ratio (SNR)**:\n   - The SNR is proportional to the energy per cycle divided by thermal noise energy ($kT$):\n     $$\n     \\text{SNR} \\propto \\frac{E}{kT} \\propto C \\cdot V_{\\text{swing}}^2\n     $$\n   - Doubling $C$ **doubles the SNR**.\n\n5. **Phase Noise Scaling**:\n   - Phase noise is **inversely proportional to SNR**. If SNR doubles, phase noise **decreases by 3 dB** (since $10 \\log_{10}(2) \\approx 3$ dB).\n\n---\n\n### **Conclusion**\nDoubling the widths of NMOS and PMOS devices increases the capacitance and thus the energy per cycle, improving the SNR. This directly reduces phase noise.\n\n$$\n\\boxed{\\text{The phase noise decreases by 3 dB.}}\n$$",
        "format": "markdown",
        "sha256": "4a5a7d3f11c95e6d981a65adfe203c835f98c0d699cc0ba9ec14a574d5a6492e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB reduction. Its capacitance/energy argument is consistent with the valid node-capacitance explanation in the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1943,
        "output_tokens": 2586,
        "total_tokens": 4529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1943,
        "output_tokens": 2586,
        "total_tokens": 4529,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths of the NMOS and PMOS devices in a ring oscillator are doubled, the phase noise **decreases by a factor of 2** (i.e., improves by **3 dB**). \n\n### Key Reasoning:\n1. **Transistor Scaling**: Doubling the width ($W$) of all transistors increases their transconductance ($g_m$) and drain current ($I_d$) linearly (assuming constant overdrive voltage). However, the **load capacitance** ($C$) also doubles because the input capacitance of each stage scales with the width of the next stage's transistors.\n\n2. **Delay per Stage**: The delay per inverter stage ($ \\tau \\approx \\frac{C \\cdot V_{DD}}{I_d} $) remains **unchanged** since both $C$ and $I_d$ scale proportionally. Thus, the oscillation frequency ($f_0$) stays the same.\n\n3. **Noise Contribution**: \n   - Thermal noise current spectral density ($ \\overline{i_n^2}/\\Delta f = 4kT\\gamma g_m $) **doubles** (as $g_m$ scales with $W$).\n   - However, the **signal power** ($P_{sig} = V_{DD} \\cdot I_{avg}$) also **doubles** due to the increased current.\n   - In oscillator phase noise models (e.g., Leeson’s equation), phase noise is **inversely proportional to signal power**. Doubling $P_{sig}$ reduces phase noise by a factor of 2.\n\n4. **Impulse Sensitivity Function (ISF) Model**: \n   - The maximum charge displacement ($q_{max} \\propto C \\cdot V_{DD}$) scales with $W$.\n   - The noise current scales with $W$, but the slope of the waveform ($dv/dt \\propto I_d/C$) remains constant.\n   - Phase noise scales as $ \\propto \\frac{\\overline{i_n^2}}{q_{max}^2} \\propto \\frac{W}{W^2} = \\frac{1}{W} $. Doubling $W$ reduces phase noise by **1/2**.\n\n### Conclusion:\nDoubling the widths of NMOS and PMOS devices **halves the phase noise** (a 3 dB improvement) because the signal power increases linearly with width while the noise contribution scales proportionally, leading to an inverse relationship between phase noise and transistor width.\n\n**Answer:** The phase noise **decreases by a factor of 2** (improves by 3 dB).",
        "format": "markdown",
        "sha256": "0b311939d40acffe5ba29d805478777ec84ac0a3818fc6a0c56f3de59e3ff3f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The factor-of-two (3 dB) reduction is correct, and the ISF scaling of noise-current PSD with width versus squared charge swing supports it. But the answer also incorrectly treats supply power as oscillation signal power and applies inverse-signal-power reasoning while overlooking that the noise increases too.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1943,
        "output_tokens": 7137,
        "total_tokens": 9080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1943,
        "output_tokens": 7137,
        "total_tokens": 9080,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6597,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When the widths of the NMOS and PMOS devices in a ring oscillator are doubled, the **phase noise decreases by a factor of 2** (i.e., improves by **3 dB**). Here's why:\n\n---\n\n### **Key Observations:**\n1. **Transconductance (gm) Scaling**:  \n   Doubling the width of a transistor (with fixed length and overdrive voltage) **doubles its transconductance** $ g_m \\propto W $. This increases the drive strength of each stage.\n\n2. **Capacitance Scaling**:  \n   The input capacitance of each stage (dominated by gate capacitance) **doubles** because $ C \\propto W $. This affects the delay per stage.\n\n3. **Delay and Frequency**:  \n   The delay per stage $ \\tau \\propto \\frac{C}{g_m} $. Since both $ C $ and $ g_m $ scale linearly with width, $ \\tau $ **remains unchanged**. Thus, the oscillation frequency $ f_0 = \\frac{1}{2N\\tau} $ **stays the same**.\n\n4. **Power Consumption**:  \n   The current through each transistor doubles (since $ I \\propto W $ in saturation), so the **power $ P = V_{DD} \\cdot I $ doubles** (assuming $ V_{DD} $ is constant).\n\n5. **Phase Noise Dependence**:  \n   For ring oscillators, phase noise is **inversely proportional to power** (as derived from Leeson’s equation and verified in Razavi’s *RF Microelectronics*). Specifically:\n   $$\n   L(\\Delta \\omega) \\propto \\frac{1}{P}\n   $$\n   Doubling $ P $ **halves the phase noise**.\n\n---\n\n### **Why Not a Factor of 4?**\n- Some might expect phase noise to scale with $ 1/g_m^2 $, but in ring oscillators, the **amplitude $ V_{amp} $** is clamped by $ V_{DD} $, so the signal power scales with current (not $ g_m^2 $).\n- The **Hajimiri LTV model** confirms that phase noise scales as $ \\frac{1}{q_{max}^2} \\cdot \\overline{i_n^2} $, where:\n  - $ q_{max} \\propto C \\cdot V_{amp} $ (doubles due to $ C $),\n  - $ \\overline{i_n^2} \\propto g_m $ (doubles due to $ g_m $).\n  - Net scaling: $ \\frac{1}{q_{max}^2} \\cdot \\overline{i_n^2} \\propto \\frac{1}{4} \\cdot 2 = \\frac{1}{2} $.\n\n---\n\n### **Conclusion**\nDoubling the widths of all transistors in the ring oscillator **doubles the power consumption** while keeping the frequency and $ Q $-factor unchanged. Since phase noise is **inversely proportional to power**, the phase noise **decreases by a factor of 2**.\n\n$$\n\\boxed{\\text{Phase noise decreases by a factor of 2.}}\n$$",
        "format": "markdown",
        "sha256": "6f77e75f7359fcff07157c7f5bdf65555432f3039edff9cbbdad23bad38491ad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB (factor-of-two) phase-noise reduction and gives a consistent scaling argument: node charge doubles while device noise-current power doubles. The extra Q-factor claim is not material to the answer.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1943,
        "output_tokens": 8071,
        "total_tokens": 10014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1943,
        "output_tokens": 8071,
        "total_tokens": 10014,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7395,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of a ring oscillator with three stages, we need to consider the behavior of the circuit in the small-signal regime. Each stage of the ring oscillator typically consists of a CMOS inverter, which includes a PMOS transistor connected to the supply node (Vdd) and an NMOS transistor connected to ground.\n\nIn the small-signal model, the PMOS transistor can be represented by its output resistance \\( r_o \\). This resistance is a measure of the transistor's ability to maintain a constant current as the voltage across it changes slightly. For a CMOS inverter, the PMOS transistor's output resistance \\( r_o \\) is a key parameter in determining the small-signal behavior of the circuit.\n\nIn a ring oscillator with three stages, each stage has a PMOS transistor connected to the supply node. Since these PMOS transistors are connected in parallel to the supply node, the total small-signal resistance seen looking into the supply node is the parallel combination of the output resistances of these transistors. For \\( n \\) identical stages, the total resistance \\( R \\) is given by:\n\n\\[\nR = \\frac{r_o}{n}\n\\]\n\nIn this case, with three stages (\\( n = 3 \\)), the small-signal resistance seen looking into the supply node is:\n\n\\[\nR = \\frac{r_o}{3}\n\\]\n\nThus, the small-signal resistance seen looking into the supply node of the ring oscillator is:\n\n\\[\n\\boxed{R = \\frac{r_o}{3}}\n\\]",
        "format": "markdown",
        "sha256": "f9ae086b9b637fd9ad51c4d811c494a9a4c168f32290c427322c25257b7ad5f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misses the oscillation-driven charging and discharging of the load capacitances. The three PMOS output resistances are not directly in parallel because their drains connect to separate switching nodes, so the stated topology and result are invalid.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1940,
        "output_tokens": 9538,
        "total_tokens": 11478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1940,
        "output_tokens": 9538,
        "total_tokens": 11478,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the **small-signal resistance seen looking into the supply node (Vdd)** of a **3-stage CMOS ring oscillator**, we must analyze the circuit from a **small-signal perspective** at the **bias point** where the oscillator operates.\n\n---\n\n### 🔍 **Understanding the Circuit**\n\n- The ring oscillator consists of **3 identical CMOS inverters** connected in a loop.\n- Each inverter has:\n  - A **PMOS transistor** with its **source connected to Vdd** and **drain to the output node**.\n  - An **NMOS transistor** with its **source connected to ground** and **drain to the same output node**.\n- The **output of one inverter** is connected to the **input of the next**, forming a closed loop.\n- The **supply node (Vdd)** is the **common source terminal** for all **PMOS transistors** in the ring.\n\n---\n\n### 🧠 **Small-Signal Perspective**\n\nIn **small-signal analysis**, we consider the **AC behavior** around the DC bias point. The **supply node (Vdd)** is typically treated as an **AC ground** in many analyses, but here we are explicitly asked for the **resistance seen looking into Vdd**, i.e., the **resistance between Vdd and AC ground**.\n\nThis means we want to determine the **equivalent small-signal resistance** that would be measured if we applied a small AC voltage at Vdd and measured the resulting current flowing into the circuit.\n\n---\n\n### 📐 **Resistance Path Through One Inverter**\n\nFor **one CMOS inverter**:\n- The **PMOS** provides a **small-signal resistance $ r_{o,p} $** from **Vdd to the output node**.\n- The **NMOS** provides a **small-signal resistance $ r_{o,n} $** from the **output node to ground**.\n- Therefore, the **total small-signal resistance from Vdd to ground through one inverter** is:\n\n$$\nR_{\\text{inverter}} = r_{o,p} + r_{o,n}\n$$\n\nThis is because the **PMOS and NMOS are in series** between Vdd and ground in the small-signal model.\n\n---\n\n### ⚙️ **Parallel Combination Across All Inverters**\n\nSince there are **3 identical inverters**, each contributing a path from Vdd to ground with resistance $ r_{o,p} + r_{o,n} $, and these paths are **in parallel** (as they all share the same Vdd and ground nodes), the **total small-signal resistance** seen into Vdd is:\n\n$$\nR_{\\text{total}} = \\frac{r_{o,p} + r_{o,n}}{3}\n$$\n\nThis assumes **symmetry** across all stages, which is standard in a well-designed ring oscillator.\n\n---\n\n### ✅ **Final Answer**\n\n$$\n\\boxed{\\frac{r_{o,p} + r_{o,n}}{3}}\n$$\n\nThis is the **small-signal resistance seen looking into the supply node (Vdd)** of the 3-stage ring oscillator. It represents the **parallel combination** of the **series resistances** of the PMOS and NMOS transistors in each inverter.",
        "format": "markdown",
        "sha256": "bbe24f31bdd3d0df423439324c5a30164eb1c05c6a3148bdb7f5d3d93a821776"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes the three-inverter topology but treats it as static series/parallel output resistances. It misses the dominant oscillation-driven charging and discharging of the node capacitances, which sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1940,
        "output_tokens": 15468,
        "total_tokens": 17408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1940,
        "output_tokens": 15468,
        "total_tokens": 17408,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the **small-signal resistance seen looking into the supply node** of a 3-stage ring oscillator, we analyze the small-signal behavior of the circuit. The supply node (VDD) is connected to the **sources of all PMOS transistors** in the inverters.\n\n---\n\n### **Key Observations and Assumptions**\n\n- The ring oscillator consists of **three identical CMOS inverters** arranged in a loop.\n- Each inverter has a **PMOS transistor** with its source connected to VDD and drain to the output node.\n- In small-signal analysis, the **DC bias point** is such that each node voltage is approximately $ V_{DD}/2 $, placing both NMOS and PMOS in saturation.\n- The **small-signal model** of a MOSFET includes:\n  - Transconductance $ g_m $\n  - Output resistance $ r_o $\n\n---\n\n### **Small-Signal Analysis**\n\nLet’s consider the **symmetry** of the ring oscillator. Due to the closed loop and identical inverters, the small-signal voltages at all internal nodes (outputs of the inverters) are equal:\n\n$$\nv_1 = v_2 = v_3 = \\frac{v_{dd}}{2}\n$$\n\nThis symmetry simplifies the analysis significantly.\n\nFor each **PMOS**, the small-signal current flowing from VDD to the drain is:\n\n$$\ni_p = g_m (v_{dd} - v_g) + \\frac{1}{r_o}(v_{dd} - v_d)\n$$\n\nSince $ v_g = v_d = \\frac{v_{dd}}{2} $, this becomes:\n\n$$\ni_p = (g_m + \\frac{1}{r_o}) \\cdot \\frac{v_{dd}}{2}\n$$\n\nWith **three identical PMOS transistors**, the total current flowing out of the supply node is:\n\n$$\ni_{total} = 3 \\cdot (g_m + \\frac{1}{r_o}) \\cdot \\frac{v_{dd}}{2}\n$$\n\nThus, the **small-signal resistance** seen into the supply node is:\n\n$$\nR = \\frac{v_{dd}}{i_{total}} = \\frac{v_{dd}}{3 \\cdot (g_m + \\frac{1}{r_o}) \\cdot \\frac{v_{dd}}{2}} = \\frac{2}{3(g_m + \\frac{1}{r_o})}\n$$\n\n---\n\n### **Simplification for Practical Circuits**\n\nIn most practical CMOS circuits, the **output resistance $ r_o $** is very large due to the small channel-length modulation parameter $ \\lambda $. Therefore, $ \\frac{1}{r_o} \\ll g_m $, and it is often neglected in small-signal analysis.\n\nHence, the **approximate small-signal resistance** is:\n\n$$\nR \\approx \\frac{2}{3 g_m}\n$$\n\nWhere $ g_m $ is the transconductance of each PMOS transistor (assuming symmetric inverters).\n\n---\n\n### ✅ **Final Answer**\n\n$$\n\\boxed{\\frac{2}{3 g_m}}\n$$\n\nThis is the **small-signal resistance seen looking into the supply node** of the 3-stage ring oscillator, assuming symmetric inverters and negligible output resistance $ r_o $.",
        "format": "markdown",
        "sha256": "ead7a7fd795980f7bcc7be6619131a3b7524d911d663d5208488e9f2407569bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply resistance. The golden solution specifically assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1940,
        "output_tokens": 15235,
        "total_tokens": 17175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1940,
        "output_tokens": 15235,
        "total_tokens": 17175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal resistance $ R_X $ seen into the supply node of a ring oscillator is determined by **linearizing the circuit around its DC operating point**. This resistance depends on the **transconductances** ($ g_{mn}, g_{mp} $) of the transistors in the inverters, which are evaluated at the **bias point** (e.g., $ V_{DD}/2 $ for symmetric CMOS inverters).\n\n---\n\n### Key Insight:\n- The calculation $ R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right) $ assumes each inverter behaves like two **diode-connected devices in series**, contributing a resistance of $ \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} $. With three inverters in parallel (all connected to the same supply node), the total resistance becomes the parallel combination of these three resistances.\n- This analysis is **valid under small-signal conditions**, where the circuit is linearized around a **fixed DC bias point**.\n\n---\n\n### Does Oscillation Affect $ R_X $?\n\n- **Oscillation is a large-signal phenomenon** that occurs due to the feedback loop and gain in the ring oscillator.\n- However, **small-signal parameters like $ R_X $** are defined **around the DC operating point**, not the dynamic behavior during oscillation.\n- In a well-designed ring oscillator, the **DC bias remains unchanged** even when the circuit is oscillating. The average current through the transistors and their bias conditions (e.g., $ V_{GS} $, $ V_{DS} $) stay the same as in the static case.\n- Therefore, the **transconductances $ g_{mn} $ and $ g_{mp} $** remain constant, and so does the small-signal resistance $ R_X $.\n\n---\n\n### Conclusion:\nThe small-signal resistance $ R_X $ is **not affected by the oscillation**. It is determined solely by the **DC bias point**, which remains unchanged whether the circuit is oscillating or not.\n\n$$\n\\boxed{\\text{No, the answer does not change.}}\n$$",
        "format": "markdown",
        "sha256": "937d88b0e689e57228df9f48b5b75e583358d20e851b00b613418b7fb3159188"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It concludes that the static result still holds, which earns partial credit, but incorrectly bases this on an unchanged DC bias and misses that oscillating supply current is set by charging and discharging node capacitances. It does not establish why the resulting resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4036,
        "output_tokens": 4440,
        "total_tokens": 8476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3524,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2018,
        "output_tokens": 2220,
        "total_tokens": 4238,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal resistance \\( R_X \\) seen looking into the supply node of a ring oscillator is derived under the **static assumption** that all inverters are biased at their trip point (i.e., input and output voltages are equal, typically at \\( V_{DD}/2 \\)). In this regime, each inverter behaves as a series combination of two diode-connected transistors (PMOS and NMOS), with small-signal resistances \\( 1/g_{mp} \\) and \\( 1/g_{mn} \\), respectively. Since the three inverters are in parallel from the supply node to ground, the total resistance becomes:\n\n$$\nR_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right).\n$$\n\n---\n\n### Key Insight: Small-Signal Analysis vs. Oscillation\n\nSmall-signal analysis is a **linear approximation** around a **DC operating point**. It assumes that the circuit is perturbed slightly from its equilibrium state, and the behavior is analyzed using linearized models (e.g., small-signal parameters like \\( g_m \\)).\n\nIn a **ring oscillator**, the circuit **does not settle into a static DC state**—it oscillates due to the regenerative feedback. However, the **average DC operating point** (i.e., the time-averaged voltage at each node) still remains at \\( V_{DD}/2 \\) for a symmetric design. This means the **DC bias conditions** for the transistors (and thus their small-signal parameters \\( g_{mn}, g_{mp} \\)) remain unchanged.\n\n---\n\n### Does \\( R_X \\) Change During Oscillation?\n\n- The calculation of \\( R_X \\) relies on the **linearized model** at the **DC operating point**.\n- Even though the circuit is oscillating, the **average DC bias** is the same as in the static case.\n- Therefore, the **small-signal resistances** \\( 1/g_{mn} \\) and \\( 1/g_{mp} \\) remain unchanged.\n- Consequently, the **small-signal resistance $ R_X $** seen into the supply node **does not change** when the circuit is oscillating.\n\nHowever, note that the **assumption** that each inverter behaves as two diode-connected devices in series is only valid **at the DC operating point** (where $ V_{in} = V_{out} $). In reality, during oscillation, the inputs and outputs of the inverters are not equal, so the transistors are not always in the same region of operation. But since $ R_X $ is defined in the context of **small-signal analysis around the DC bias**, it is **not affected by the large-signal oscillation**.\n\n---\n\n### Final Answer\n\n$$\n\\boxed{\\text{No, } R_X \\text{ does not change.}}\n$$",
        "format": "markdown",
        "sha256": "200f86f89f27fa5783d4b7ce195b1e0db4d1a766d97818802e7b13e150c1957c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It reaches the approximate conclusion that oscillation does not greatly change RX, but incorrectly treats the average DC bias as preserving the static small-signal derivation. It omits the key charging and discharging mechanism and why the resulting resistance remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4036,
        "output_tokens": 8870,
        "total_tokens": 12906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7672,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2018,
        "output_tokens": 4435,
        "total_tokens": 6453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3836,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance \\( R_X \\) seen into the supply node (VDD) of a ring oscillator, we need to consider the behavior of the circuit at its DC operating point. In a symmetric ring oscillator with three identical inverters, the DC operating point for each inverter is at the switching threshold, which is typically \\( VDD/2 \\). At this point, both the NMOS and PMOS transistors in each inverter are conducting, and their gate-to-source and drain-to-source voltages are equal, making them effectively diode-connected.\n\nFor a diode-connected MOSFET, the small-signal resistance is approximately \\( 1/gm \\), where \\( gm \\) is the transconductance of the transistor. In the case of each inverter, the PMOS and NMOS transistors are in series between VDD and ground. Therefore, the small-signal resistance of one inverter is the sum of the small-signal resistances of the PMOS and NMOS, which is \\( 1/gmp + 1/gmn \\).\n\nSince there are three inverters connected in parallel to VDD, the total small-signal resistance \\( R_X \\) seen into the supply node is the parallel combination of the resistances of each inverter. This results in:\n\\[ R_X = \\frac{1}{3} \\left( \\frac{1}{gmp} + \\frac{1}{gmn} \\right) \\]\n\nThe question is whether this resistance changes when the circuit is oscillating. The small-signal resistance is a property of the circuit's behavior around its DC operating point. In a ring oscillator, the DC operating point is the average voltage at each node, which remains at \\( VDD/2 \\) even when the circuit is oscillating. Therefore, the small-signal parameters \\( gmn \\) and \\( gmp \\) are evaluated at this DC operating point, and the resistance \\( R_X \\) remains the same.\n\nThus, the small-signal resistance \\( R_X \\) does not change when the circuit is oscillating.",
        "format": "markdown",
        "sha256": "699eccc8dcd647933d9c51fb02a3d32ce48ff9382a866059707f0d46ca5b715f"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It says the static resistance expression still holds, but bases this on the DC operating point and does not identify the capacitive charging/discharging mechanism that sets the oscillating supply current.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4036,
        "output_tokens": 9448,
        "total_tokens": 13484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8604,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2018,
        "output_tokens": 4724,
        "total_tokens": 6742,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4302,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain of the circuit is primarily determined by the transconductance \\( g_m \\) of the input differential pair (M1 and M2) and the output resistance \\( R_{\\text{out}} \\) of the load transistors. In this circuit, M7 acts as the tail current source for the differential pair M1 and M2. When the width of M7 increases, the current \\( I_{\\text{tail}} \\) through M7 increases, assuming the gate voltage (CK) is sufficient to keep M7 in saturation. \n\nThe transconductance \\( g_m \\) of each transistor in the differential pair is proportional to the square root of the tail current \\( I_{\\text{tail}} \\) and the width-to-length ratio \\( (W/L) \\) of the transistors. Therefore, an increase in \\( I_{\\text{tail}} \\) leads to an increase in \\( g_m \\). Since the voltage gain \\( A_v \\) is given by \\( A_v = g_m \\cdot R_{\\text{out}} \\), an increase in \\( g_m \\) results in a higher voltage gain.\n\nThus, as the width of M7 increases, the initial voltage gain increases.",
        "format": "markdown",
        "sha256": "8094cfc8bf67c6a56b8640ed46f7a6f969d4012dc3aa03289b3890fff52f6bb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M7 as the tail-current device and notes that wider M7 increases tail current, but concludes that initial gain increases. This contradicts the key result: the relevant initial-gain factor decreases as tail current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2054,
        "output_tokens": 2074,
        "total_tokens": 4128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2054,
        "output_tokens": 2074,
        "total_tokens": 4128,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1822,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain of the circuit increases as the width of M7 increases. This is because M7 acts as a tail current source for the differential pair formed by M1 and M2. When the width of M7 increases, the current through M7 (the tail current) also increases, assuming the gate voltage (CK) remains constant. In a differential pair, the transconductance (gm) of the input transistors (M1 and M2) is proportional to the square root of the tail current. Therefore, an increase in the tail current leads to an increase in gm. Since the voltage gain of the differential pair is proportional to gm, the initial voltage gain of the circuit increases as the width of M7 increases.",
        "format": "markdown",
        "sha256": "7ca0709ab2146e33abb48377766533355f3059ad1bee004e1c5cc3db841b2bc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the correct trend: widening M7 increases tail current and decreases the initial gain, which depends on a factor like gm/ICM—not gm alone. The answer correctly identifies the tail-current increase and the input-pair gm trend, but uses them to reach the wrong result.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2054,
        "output_tokens": 2073,
        "total_tokens": 4127,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2054,
        "output_tokens": 2073,
        "total_tokens": 4127,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1922,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain of the circuit increases as the width of **M7** increases. \n\n### **Reasoning:**\n1. **Role of M7**:  \n   M7 acts as the **tail current source** for the differential pair formed by **M1 and M2**. Its gate is driven by the clock signal **CK**, and its drain connects to the common source node of M1 and M2. When **CK** is high, M7 conducts, providing a bias current to the differential pair.\n\n2. **Impact of Width on Current**:  \n   For a MOSFET in saturation (typical for a tail current source), the drain current $ I_D $ is proportional to its width-to-length ratio ($ W/L $):  \n   $$\n   I_D \\propto \\frac{W}{L} \\cdot (V_{GS} - V_{TH})^2\n   $$  \n   Increasing **M7’s width** (while keeping $ L $ and $ V_{GS} $ constant) **increases the tail current** $ I_{tail} $ flowing through M1 and M2.\n\n3. **Transconductance of the Differential Pair**:  \n   The transconductance $ g_m $ of the differential pair (M1, M2) is:  \n   $$\n   g_m = \\sqrt{2 \\mu_n C_{ox} \\frac{W}{L} I_{tail}}\n   $$  \n   As $ I_{tail} $ increases due to a wider M7, $ g_m $ **increases**.\n\n4. **Voltage Gain**:  \n   In a differential amplifier with an active load (e.g., M3 and M4), the small-signal voltage gain $ A_v $ is:  \n   $$\n   A_v \\propto g_m \\cdot R_{out}\n   $$  \n   where $ R_{out} $ is the output resistance of the load. Since $ g_m $ increases with a wider M7, the **voltage gain increases**.\n\n### **Conclusion:**\nIncreasing the width of **M7** increases the tail current, which in turn increases the transconductance of the differential pair (M1, M2). This directly **increases the initial voltage gain** of the circuit.\n\n**Answer:** The initial voltage gain **increases** as the width of M7 increases.",
        "format": "markdown",
        "sha256": "02b0354ed53ee5c1625f5e2af0dd1a5b4691ab69a19ea333b34b53ba873de433"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies M7 as the tail device and says its wider size increases tail current, but reaches the opposite trend. For the comparator’s initial gain, the relevant gain factor decreases as tail current rises; the conventional gm·Rout argument does not apply here.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2054,
        "output_tokens": 3144,
        "total_tokens": 5198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2644,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2054,
        "output_tokens": 3144,
        "total_tokens": 5198,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2644,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the effect of increasing the capacitance at nodes P and Q on the initial voltage gain, we need to consider the nature of the circuit and the role of the capacitances in a switched-capacitor circuit.\n\nIn a switched-capacitor circuit, the voltage gain is typically determined by the ratio of capacitances. Specifically, the gain is often given by the ratio of the input capacitance to the feedback capacitance. If nodes P and Q are the input nodes where the input capacitance is connected, then increasing the capacitance at these nodes would directly affect the gain.\n\nGiven that the circuit is likely a switched-capacitor circuit, and assuming that the gain is set by the ratio of the input capacitance (C_pq) to the feedback capacitance (C_fb), the gain can be expressed as:\n\n\\[ \\text{Gain} = k \\cdot \\frac{C_{pq}}{C_{fb}} \\]\n\nwhere \\( k \\) is a constant that depends on the specific configuration of the circuit (e.g., non-inverting or inverting).\n\nIf the capacitance at P and Q (C_pq) is increased, and the feedback capacitance (C_fb) remains constant, then the gain will increase proportionally to the increase in C_pq.\n\nTherefore, the initial voltage gain would increase if the capacitance at nodes P and Q is increased.",
        "format": "markdown",
        "sha256": "0051cd8528b3bd1bb26cb97cc1fe273afe60b3e001cd01e743b65e2adbee39f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a switched-capacitor circuit and uses an unrelated capacitance-ratio gain formula. It concludes the gain increases, contrary to the correct result that the initial gain remains approximately unchanged while the transient slows.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2053,
        "output_tokens": 6469,
        "total_tokens": 8522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2053,
        "output_tokens": 6469,
        "total_tokens": 8522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a switched capacitor circuit, the **initial voltage gain** is typically determined by the **ratio of capacitances** involved in charge transfer. In this configuration:\n\n- Nodes **P** and **Q** are the drains of the input differential pair (M₁ and M₂), which likely serve as **sampling nodes** during one clock phase.\n- The capacitance at these nodes (C_P and C_Q) acts as the **input sampling capacitance** (C₁) in a typical switched capacitor amplifier stage.\n- The voltage gain in such circuits often follows the form:  \n  $$\n  A_v = \\frac{C_{\\text{sampling}}}{C_{\\text{feedback}}}\n  $$  \n  where $ C_{\\text{sampling}} $ is the capacitance at the input nodes (P and Q), and $ C_{\\text{feedback}} $ is a fixed reference capacitor in the next stage.\n\n---\n\n### Key Insight:\nIf the **capacitance at nodes P and Q increases**, and assuming the feedback capacitance remains constant, the **numerator** of the gain ratio increases. Therefore, the **voltage gain magnitude increases**.\n\nThis is consistent with the behavior of switched capacitor amplifiers, where the gain is directly proportional to the sampling capacitance when the feedback capacitance is fixed.\n\n---\n\n### Conclusion:\nIncreasing the capacitance at nodes **P and Q** (the sampling capacitors) **increases the initial voltage gain** of the circuit.\n\n$$\n\\boxed{\\text{The initial voltage gain increases.}}\n$$",
        "format": "markdown",
        "sha256": "5349bb5e14ae49f2e698f45dd1fe64bd982ef9372926040430e5091ba394d46c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the circuit as a switched-capacitor amplifier and applies an irrelevant capacitance-ratio formula. The conclusion that initial gain increases contradicts the correct result: the gain remains approximately unchanged, while the transient slows.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 4598,
        "total_tokens": 6651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 4598,
        "total_tokens": 6651,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The initial voltage gain in this switched-capacitor circuit is determined by the **ratio of capacitances** involved in charge transfer. Nodes **P** and **Q** are likely the output nodes where charge is stored during a sampling phase (e.g., as part of a differential amplifier or sample-and-hold stage).\n\nIn switched-capacitor circuits, the voltage gain is typically proportional to the ratio of input capacitance to the feedback or output capacitance. If the capacitance at nodes **P** and **Q** (which act as the output or feedback capacitors) is **increased**, the same amount of charge (from the input) will result in a **smaller voltage change** at these nodes, since $ V = \\frac{Q}{C} $. Thus, the voltage gain **decreases** as the output capacitance increases.\n\n---\n\n### Final Answer:\n**Increasing the capacitance at nodes P and Q decreases the initial voltage gain.**  \nThis is because the gain in switched-capacitor circuits depends on the ratio of input to output capacitances, and a larger output capacitance reduces the voltage developed for a given input charge.",
        "format": "markdown",
        "sha256": "8f52ac87645df8ef7ace721683db6b585ea2410bbbc4f6da70c6d52b80e1b3bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result: increasing the capacitance leaves the initial gain approximately unchanged and mainly slows the transient. The answer misidentifies the circuit as a switched-capacitor charge-transfer stage and applies an inapplicable charge-to-voltage argument.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 1791,
        "total_tokens": 3844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 1791,
        "total_tokens": 3844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1557,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the diagram is a **dynamic logic stage** (likely a precharge-evaluate latch or sense amplifier). M5 and M6 are **PMOS transistors** used during the **precharge phase** to charge nodes *X* and *Y* to $ V_{DD} $. Their gates are controlled by the clock signal $ CK $ (via switches S1 and S2), and their drains connect to *X* and *Y* (via switches S3 and S4).\n\n---\n\n### **Key Analysis: Impact of Increasing M5/M6 Widths**\n\n1. **Role of M5 and M6**:\n   - During the **precharge phase** (e.g., when $ CK = 0 $), M5 and M6 turn **on** (since their gates are at $ 0 $, enabling PMOS conduction).\n   - They supply current to charge the capacitive nodes *X* and *Y* to $ V_{DD} $.\n   - During the **evaluation phase** (e.g., when $ CK = 1 $), M5 and M6 turn **off**, and the circuit evaluates based on inputs $ V_{in1} $ and $ V_{in2} $.\n\n2. **Effect of Wider Transistors**:\n   - **Increased Drive Strength**: A larger width ($ W $) for PMOS increases the $ W/L $ ratio, which **increases the drain current** ($ I_D \\propto W $) during precharge.\n   - **Faster Charging**: With higher current, the time to charge *X* and *Y* to $ V_{DD} $ is reduced. This shortens the **precharge time**, allowing the circuit to transition to the evaluation phase sooner.\n   - **Capacitance Consideration**: While wider transistors increase **drain capacitance** (proportional to $ W $), the **current also scales linearly with $ W $**. Thus, the **RC time constant** for charging remains approximately constant or even improves slightly due to reduced resistance.\n\n3. **Net Effect on Speed**:\n   - The **precharge phase dominates the minimum clock period** in dynamic logic circuits.\n   - Faster precharge enables a **shorter clock cycle**, directly improving the **maximum operating frequency** (i.e., **speed improves**).\n\n---\n\n### **Conclusion**\n\nIncreasing the widths of **M5 and M6** enhances their drive strength during the precharge phase, reducing the time required to charge nodes *X* and *Y*. This shortens the precharge time, allowing the circuit to operate at a higher clock frequency. Therefore, **the speed improves**.\n\n$$\n\\boxed{\\text{Speed improves}}\n$$",
        "format": "markdown",
        "sha256": "cd9624b5a6c0385b727883d4bdb743295e22f3cb21800df35265992dee76aaa9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct initial trend, but misidentifies M5/M6 as clocked precharge devices rather than cross-coupled regenerative PMOS devices. It misses the regeneration mechanism and the eventual capacitance-driven optimum, and its claim that added capacitance does not limit speed is misleading.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2053,
        "output_tokens": 4570,
        "total_tokens": 6623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1792,
        "input_tokens": 2053,
        "output_tokens": 4570,
        "total_tokens": 6623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4008,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The speed **improves** when increasing the widths of \\( M_5 \\) and \\( M_6 \\).  \n\n### Explanation:  \nIn this circuit, \\( M_5 \\) and \\( M_6 \\) are likely **precharge transistors** (typically PMOS in dynamic logic). Their role is to charge the nodes \\( X \\) and \\( Y \\) (and thus \\( V_{\\text{out}} \\)) to \\( V_{DD} \\) during the precharge phase (when \\( CK = 0 \\)).  \n\n- **Transistor width and resistance**: A wider transistor has a **lower on-resistance** (\\( R_{\\text{on}} \\)). For a MOS switch, \\( R_{\\text{on}} \\propto \\frac{L}{W} \\), so increasing \\( W \\) reduces \\( R_{\\text{on}} \\).  \n- **Precharge speed**: With lower \\( R_{\\text{on}} \\), the time constant for charging the capacitive nodes \\( X \\) and \\( Y \\) decreases (\\( \\tau = R_{\\text{on}} \\cdot C \\)). This shortens the precharge phase, allowing the circuit to transition faster to the evaluation phase.  \n\nThus, wider \\( M_5 \\) and \\( M_6 \\) accelerate precharging, **improving overall speed**.  \n\n**Answer:** Speed improves.",
        "format": "markdown",
        "sha256": "55b336d50879240d3aa70568696f01ce75ab2c1bedfeb7f5b337f71a2642d4f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct initial trend, but misidentifies M5 and M6 as precharge devices rather than cross-coupled regenerative PMOS devices. It misses the regeneration mechanism and the capacitance-driven optimum, so its explanation does not support the circuit's speed improvement.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 502,
        "total_tokens": 2555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 205,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 502,
        "total_tokens": 2555,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 205,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The speed **improves** when the widths of $ M_5 $ and $ M_6 $ are increased. \n\n### Explanation:\nIn this circuit, $ M_5 $ and $ M_6 $ form a **cross-coupled latch** (likely PMOS transistors) that provides **positive feedback** during the evaluation phase. In dynamic logic circuits like sense amplifiers or clocked comparators, the regeneration speed of the differential output (e.g., $ X $ and $ Y $) depends on the strength of this latch. \n\n- **Wider transistors** ($ W $) increase the **transconductance** ($ g_m $) and reduce the **on-resistance** ($ R_{on} $) of $ M_5 $ and $ M_6 $. \n- This allows faster **charging** of the output nodes ($ X $, $ Y $) during the regeneration phase, as the cross-coupled pair can supply more current to pull the nodes to their final states.\n- Stronger positive feedback accelerates the resolution of small differential signals at the input (e.g., $ P $, $ Q $), reducing the propagation delay.\n\nThus, **increasing the widths of $ M_5 $ and $ M_6 $ improves the speed** by enhancing the latch's ability to regenerate the signal quickly. \n\n**Answer:** The speed **improves**.",
        "format": "markdown",
        "sha256": "ede157ed467cddae91f9bcdcb0f8d1763404ee6088e38c4e5235cbc8eecbc53b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly states that widening M5/M6 initially improves speed by strengthening latch regeneration, but omits the added parasitic-capacitance limit and resulting optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 1282,
        "total_tokens": 3335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 992,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2053,
        "output_tokens": 1282,
        "total_tokens": 3335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 992,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine whether increasing the widths of the clocked transistors in the given circuit improves or degrades the speed, we need to analyze the role of these transistors and their impact on the circuit's performance.\n\nThe circuit in question involves transmission gates, which are used to pass signals conditionally based on a control signal (CK). Each transmission gate consists of a PMOS and an NMOS transistor, with the PMOS controlled by the complement of the control signal (CK_bar) and the NMOS controlled by the control signal (CK). This configuration ensures that both transistors are on when the control signal is high, allowing the signal to pass through.\n\nThe clocked transistors are the ones controlled by CK and CK_bar, which are part of the transmission gates. The resistance of these transistors is inversely proportional to their width. Therefore, increasing the width of these transistors reduces their resistance, which in turn decreases the RC time constant of the circuit. The RC time constant is a measure of the time it takes for the output node to charge or discharge, and a lower RC time constant means faster signal propagation.\n\nIn the context of the circuit, the transmission gates are part of the data path. When the width of the clocked transistors is increased, the resistance of the transmission gates decreases, leading to faster charging and discharging of the output node. This results in a faster propagation delay through the transmission gates, which directly improves the speed of the circuit.\n\nTherefore, increasing the widths of the clocked transistors in the given circuit improves the speed.",
        "format": "markdown",
        "sha256": "a073ea82bec825ddb4a9a64a980e49cbb8a4b0a85b2c9b7821b1065a1404298a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the correct initial resistance-based trend, but misidentifies the C2MOS latch as using transmission gates rather than clocked devices in series with data-driven devices. It also misses the added-capacitance penalty and optimum width; the topology error limits the score.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2254,
        "output_tokens": 3213,
        "total_tokens": 5467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2254,
        "output_tokens": 3213,
        "total_tokens": 5467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2906,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given dynamic logic circuit, the clocked transistors (controlled by $ CK $ and $ \\overline{CK} $) are responsible for **precharge** and **evaluation** phases. Specifically:\n\n- The **PMOS transistors** (connected to $ V_{DD} $) are enabled during the precharge phase ($ CK = 0 $) to charge the internal nodes (e.g., $ X $) to $ V_{DD} $.\n- The **NMOS transistors** (connected to ground via pull-down networks) are enabled during the evaluation phase ($ CK = 1 $) to allow the node to discharge if the input conditions are met.\n\n**Effect of Increasing Width:**\n- Wider transistors have **lower on-resistance**, which increases their current drive capability.\n- A wider **precharge PMOS** charges the node faster during precharge.\n- A wider **evaluation NMOS** allows the node to discharge more quickly during evaluation.\n\nIn dynamic logic, the **speed is typically limited by the slower of the two phases (precharge or evaluation)**. By increasing the widths of the clocked transistors, both phases become faster, reducing the overall delay.\n\n**Conclusion:**  \nIncreasing the widths of the clocked transistors **improves the speed** of the circuit by reducing the time required for both precharge and evaluation phases.\n\n---\n\n**Answer:**  \nThe speed **improves** if the widths of the clocked transistors are increased.",
        "format": "markdown",
        "sha256": "ac005c64b93e3def341193647d7c80a386f84b0a6ec6adbb3e3a5f58ba6daf3d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It reaches the correct direction and notes that wider devices have lower on-resistance, but misidentifies the C2MOS divider as a dynamic precharge/evaluation circuit and misses the series-device and added-capacitance tradeoff. The golden solution caps answers that misread the topology at 1.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2254,
        "output_tokens": 2324,
        "total_tokens": 4578,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2254,
        "output_tokens": 2324,
        "total_tokens": 4578,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2021,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a CMOS circuit, the width of a transistor affects its on-resistance and gate capacitance. Transmission gates, which are used to pass signals when the clock is active, consist of a PMOS and an NMOS transistor in parallel. When the clock signal (CK) is high, the NMOS transistor is on, and the PMOS transistor is on when the clock signal is low (CK_bar). \n\nIncreasing the width of the clocked transistors in the transmission gates reduces their on-resistance, which allows the signal to pass through more quickly. This reduction in on-resistance decreases the RC time constant, where R is the on-resistance and C is the load capacitance, leading to faster switching times. Although increasing the width also increases the gate capacitance, which could potentially slow down the clock signal driving these transistors, the question focuses on the speed of the circuit itself, not the clock driver's speed. Assuming the clock driver is strong enough to handle the increased gate capacitance, the primary effect of increasing the width of the clocked transistors is a reduction in the on-resistance, which improves the speed of signal propagation through the transmission gates.\n\nTherefore, increasing the widths of the clocked transistors in the transmission gates improves the speed of the circuit by reducing the on-resistance and, consequently, the propagation delay.",
        "format": "markdown",
        "sha256": "69eb7ee84907572afc42abdb3f4631333114c32b9e26cc20aa0dcd0c3d2e7341"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Widening does lower the clocked devices’ on-resistance, so the answer captures the initial speed benefit. But it misidentifies the C2MOS latch devices as transmission gates and dismisses clock capacitance instead of recognizing the added latch-node capacitance that eventually limits or reverses the benefit; the golden solution caps topology-misread answers at 1.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2254,
        "output_tokens": 902,
        "total_tokens": 3156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2254,
        "output_tokens": 902,
        "total_tokens": 3156,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in question consists of two main blocks, each resembling a D latch, with inputs \\( CK \\) and \\( \\overline{CK} \\). The first block outputs \\( X \\), and the second block outputs \\( Y \\), which is then inverted by \\( Inv_3 \\) to produce \\( Z \\).\n\nIn a master-slave D flip-flop configuration, the master latch updates its output when the clock signal \\( CK \\) is high, while the slave latch updates its output when \\( CK \\) is low. This means that the output of the master latch (X) and the output of the slave latch (Y) are offset by half a clock cycle. For a square wave clock signal, this offset corresponds to a 90-degree phase shift.\n\nTherefore, the outputs \\( X \\) and \\( Y \\) from the master and slave latches, respectively, are quadrature outputs. The presence of the inverter \\( Inv_3 \\) does not affect the quadrature nature of \\( X \\) and \\( Y \\), as it only inverts \\( Y \\) to produce \\( Z \\).\n\nThus, the circuit does provide quadrature outputs.",
        "format": "markdown",
        "sha256": "c74d57fdc98fb65fb587a430cb53630c6177b54060ed98d52ac8cad66f88dfc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal quadrature from the half-period timing, but omits why the outputs are not exact: Inv3 delay skews Z, and unequal latch loading can skew X and Y.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2240,
        "output_tokens": 6242,
        "total_tokens": 8482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2240,
        "output_tokens": 6242,
        "total_tokens": 8482,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6001,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine if the circuit provides quadrature outputs, we need to understand the behavior of the circuit and the definition of quadrature outputs. Quadrature outputs are signals that are 90 degrees out of phase with each other. The circuit in question has two similar halves, each with a pair of transistors controlled by CK and CK-bar signals, and an inverter at the end.\n\nThe circuit's structure suggests that it might be a type of flip-flop or latch. If each half of the circuit is a flip-flop, the outputs X and Y would be related to the clock signal CK. However, for quadrature outputs, the signals need to be 90 degrees out of phase. In a typical 2-stage circuit, the outputs are usually 180 degrees out of phase, which does not meet the criteria for quadrature outputs.\n\nGiven that the circuit has two similar halves and an inverter, it is likely that the outputs X and Y are complementary, meaning they are 180 degrees out of phase. The inverter Inv3, which takes Y as input and produces Z, does not change the phase relationship between X and Y. Therefore, the circuit does not provide quadrature outputs.\n\nIn conclusion, the circuit does not provide quadrature outputs because the outputs X and Y are likely to be 180 degrees out of phase, not 90 degrees.",
        "format": "markdown",
        "sha256": "ace0e2343862227a1e731cba471cbafc3eba7158d0b5dee6c6ae94b858381ba8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is wrong for the wrong reason: this is a C2MOS divide-by-two whose latch outputs switch half an input period apart, giving nominal quadrature, not complementary outputs 180° apart.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2240,
        "output_tokens": 5391,
        "total_tokens": 7631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2240,
        "output_tokens": 5391,
        "total_tokens": 7631,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine if the circuit provides quadrature outputs, we need to understand the behavior of the circuit and the concept of quadrature outputs. Quadrature outputs are typically two signals that are 90 degrees out of phase with each other. In digital circuits, this often means that one signal is a delayed version of the other by a quarter cycle.\n\nThe circuit in question consists of two main sections, each with a pair of transistors connected to a clock signal (CK and its complement CK_bar). Each section also has an output node (X and Y), and there is an inverter (Inv3) at the end that inverts the signal Y to produce Z.\n\nGiven that the circuit has two main sections, it is likely that each section introduces a delay. If each section introduces a delay of T/2 (where T is the period of the clock signal), then the total delay between the outputs of the two sections would be T, which corresponds to a 180-degree phase difference. This is because a full cycle is 360 degrees, and a delay of T/2 corresponds to 180 degrees.\n\nSince quadrature outputs require a 90-degree phase difference, and the circuit as described would produce a 180-degree phase difference between its outputs, it does not meet the requirement for quadrature outputs.\n\nTherefore, the circuit does not provide quadrature outputs.",
        "format": "markdown",
        "sha256": "2b32fa1a752fa32ff37a504c43116a82554fb07128599c47407b34d975f7b937"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats the latches as cascaded delays and concludes there is no quadrature. It misses the divide-by-two behavior, where the latches switch on opposite clock edges and provide nominal quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2240,
        "output_tokens": 4903,
        "total_tokens": 7143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2240,
        "output_tokens": 4903,
        "total_tokens": 7143,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a dynamic logic circuit, the speed is primarily determined by the charging and discharging of the output node. The clocked transistors, which are controlled by the clock signals (CK and CK-bar), play a crucial role in these operations. These transistors are typically used for precharging the output node to a high voltage (VDD) or for evaluating the input signals during the active phase.\n\nWhen the width of these clocked transistors is increased, their on-resistance decreases. This is because a wider transistor can pass more current for a given gate voltage, leading to a lower resistance. As a result, the time required to charge or discharge the output node is reduced, which directly improves the speed of the circuit.\n\nIn dynamic logic circuits, the speed is often limited by the RC delay associated with the charging and discharging of the output node. By increasing the width of the clocked transistors, the resistance (R) in the RC delay equation is decreased, leading to a faster transition of the output node. This reduction in delay translates to an overall improvement in the speed of the circuit.\n\nTherefore, increasing the width of the clocked transistors in a dynamic logic circuit will improve the speed of the circuit.",
        "format": "markdown",
        "sha256": "013074047706ad157d62dc0fa8b5a95f6a04082aeabad5c4d41a4b446474113d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because their on-resistance falls. It omits charge sharing and inaccurately describes the devices as directly precharging or discharging the output, rather than noting their limited output loading.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4638,
        "output_tokens": 1912,
        "total_tokens": 6550,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2319,
        "output_tokens": 956,
        "total_tokens": 3275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the circuit shown, which appears to be a **dynamic logic stage** (likely a domino or precharge-evaluate style), the **clocked transistors** (those controlled by $ \\overline{CK} $ and $ CK $) are critical to the operation. These transistors are responsible for **precharging** the internal node during the $ \\overline{CK} $ phase and **enabling evaluation** during the $ CK $ phase.\n\n---\n\n### Key Concepts:\n- **Transistor Width and Speed**:  \n  In CMOS circuits, the **width (W)** of a transistor directly affects its **on-resistance ($ R_{on} $)**. A **wider transistor** has **lower $ R_{on} $**, which allows it to **charge or discharge capacitive nodes faster**. This reduces the **RC time constant** of the circuit, leading to **faster switching**.\n\n- **Dynamic Logic Operation**:  \n  In dynamic logic:\n  - During **precharge** ($ \\overline{CK} = 1 $), the output node is charged to $ V_{DD} $ via PMOS transistors.\n  - During **evaluation** ($ CK = 1 $), the circuit evaluates the input through NMOS transistors, potentially discharging the node if the logic condition is met.\n\n  The **evaluation phase** is typically the **critical path** in dynamic logic because it often involves **series-connected NMOS transistors**, which have higher resistance and slower discharge. Thus, the **speed of the circuit is primarily limited by the evaluation phase**.\n\n---\n\n### Impact of Increasing Clocked Transistor Widths:\n- If the **clocked transistors in the evaluation path** (e.g., NMOS controlled by $ CK $) are widened:\n  - Their **on-resistance decreases**, allowing **faster discharge** of the internal node.\n  - This **reduces the evaluation delay**, improving the **overall speed** of the circuit.\n\n- Even if the **precharge transistors** (PMOS controlled by $ \\overline{CK} $) are widened:\n  - The **precharge phase becomes faster**, but this is usually **not the bottleneck** in dynamic logic.\n  - However, it still contributes positively to speed, as a faster precharge can help reduce the total cycle time.\n\n---\n\n### Conclusion:\nIncreasing the **widths of the clocked transistors** (both precharge and evaluation) **reduces their resistance**, enabling **faster charging/discharging** of the internal nodes. Since the **evaluation phase is typically the critical path**, this change **improves the overall speed** of the circuit.\n\n$$\n\\boxed{\\text{The speed improves.}}\n$$",
        "format": "markdown",
        "sha256": "354af446ef4f2fc5a5ec48ecb0b7acf4897bac680a520261d2a033125160112d"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly concludes that speed improves and cites the clocked transistors’ lower on-resistance. It omits the topology-specific charge-sharing effect and its limit, and its precharge/evaluate characterization is imprecise.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4352,
        "input_tokens": 4638,
        "output_tokens": 4812,
        "total_tokens": 9450,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3700,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2319,
        "output_tokens": 2406,
        "total_tokens": 4725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the given circuit, which appears to be a **dynamic logic structure** (likely a C2MOS latch or domino logic gate), the **clocked transistors** (controlled by $ CK $ and $ \\overline{CK} $) are critical for enabling **precharge** and **evaluation phases**.\n\n---\n\n### **Key Analysis:**\n1. **Role of Clocked Transistors:**\n   - In dynamic logic, clocked transistors (e.g., PMOS for precharge, NMOS for evaluation) control the charging/discharging of internal nodes.\n   - During **precharge**, a PMOS transistor (e.g., driven by $ \\overline{CK} $) charges a node to $ V_{DD} $.\n   - During **evaluation**, NMOS transistors (e.g., driven by $ CK $) discharge the node based on input logic.\n\n2. **Impact of Increasing Width ($ W $):**\n   - A **wider transistor** has **lower on-resistance** ($ R_{on} $), allowing **more current flow**.\n   - This **reduces the RC delay** associated with charging/discharging the node, as the resistance decreases while the capacitance remains relatively constant (or increases slightly due to larger gate area).\n   - The **dominant effect** is the **faster transition** of the node voltage, which directly improves the **speed** of the circuit.\n\n3. **Critical Path Consideration:**\n   - In dynamic logic, the **evaluation phase** (discharging the node) is often the **speed-limiting factor**.\n   - If the clocked transistors in the evaluation path (e.g., NMOS controlled by $ CK $) are made wider, they can discharge the node **faster**, reducing the propagation delay.\n\n4. **Clock Signal Overhead:**\n   - While increasing transistor width slightly increases the **gate capacitance** (and thus the load on the clock signal), this is typically **negligible** compared to the clock network's own capacitance in most designs. Therefore, the **net effect is still an improvement in speed**.\n\n---\n\n### **Conclusion:**\nIncreasing the width of the clocked transistors **reduces their on-resistance**, enabling **faster charging/discharging** of critical nodes. This **shortens the propagation delay** in both precharge and evaluation phases, leading to **improved speed**.\n\n$$\n\\boxed{\\text{The speed improves.}}\n$$",
        "format": "markdown",
        "sha256": "39ca603b458fd4ba65e68fd24c0cc93f7d233cb7e98b642eb79799bed2f09f78"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly concludes that widening the clocked transistors improves speed because their lower on-resistance speeds switching. It omits the topology-specific charge-sharing effect and its acceptable limit, and its generic precharge/evaluation explanation misses why the added capacitance has little impact on the data path.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4352,
        "input_tokens": 4638,
        "output_tokens": 3896,
        "total_tokens": 8534,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2890,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2176,
        "input_tokens": 2319,
        "output_tokens": 1948,
        "total_tokens": 4267,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1445,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure represents a **negative-edge triggered D flip-flop** implemented using **transmission gates (switches) and inverters**, structured as a **master-slave configuration**. Here's the detailed analysis:\n\n---\n\n### **Circuit Breakdown**\n1. **Input Stage**:\n   - A **switch controlled by $ CK $** allows the input signal (assumed to be $ D $, though not explicitly labeled) to pass through when $ CK = 1 $.\n   - The signal then goes through **Inverter $ \\text{Inv}_1 $**, producing $ \\overline{D} $.\n\n2. **Intermediate Stage**:\n   - A **switch controlled by $ \\overline{CK} $** (the inverse of $ CK $) connects the output of $ \\text{Inv}_1 $ to the next stage when $ CK = 0 $.\n   - This ensures the signal $ \\overline{D} $ is **latched** during the falling edge of $ CK $.\n\n3. **Output Stage**:\n   - The signal passes through **two inverters ($ \\text{Inv}_2 $ and $ \\text{Inv}_3 $)** in series, which together act as a **buffer** (since two inversions cancel out).\n   - Thus, the final output $ Q $ equals the signal from the intermediate stage, i.e., $ Q = \\overline{D} $ at the falling edge of $ CK $.\n\n---\n\n### **Key Observations**\n- **Master-Slave Mechanism**:\n  - **Master Latch**: Active when $ CK = 1 $. It samples $ D $ and holds $ \\overline{D} $ at the input of the second switch.\n  - **Slave Latch**: Active when $ CK = 0 $. It transfers $ \\overline{D} $ to the output stage, where the two inverters restore the signal to $ D $ (if the input were $ D $) or maintain $ \\overline{D} $ (if the input is not inverted).\n\n- **Edge-Triggered Behavior**:\n  - The circuit **triggers on the falling edge** of $ CK $ (when $ CK $ transitions from $ 1 \\to 0 $).\n  - At this moment, the master latch's value ($ \\overline{D} $) is passed to the slave latch, and the output updates to $ \\overline{D} $ (due to the single inversion from $ \\text{Inv}_1 $).\n\n- **Inversion Count**:\n  - Total inversions: $ \\text{Inv}_1 $ (1 inversion) + $ \\text{Inv}_2 $ and $ \\text{Inv}_3 $ (2 inversions, net 0).  \n    → **Net inversion = 1**, so the output is $ \\overline{D} $ at the falling edge of $ CK $.\n\n---\n\n### **Conclusion**\nThis arrangement is a **negative-edge triggered D flip-flop with an inverted output** (i.e., it behaves like a **$\\overline{D}$ flip-flop**). However, in standard terminology:\n- If the input is $ D $, the output $ Q $ becomes $ \\overline{D} $ at the **falling edge** of $ CK $.\n- The two inverters in the slave stage ensure the signal is **latched and buffered** without additional distortion.\n\n**Final Answer**:  \nThe circuit is a **negative-edge triggered D flip-flop** (or $\\overline{D}$ flip-flop) where the input is sampled at the falling edge of $ CK $, and the output follows the inverted input ($ \\overline{D} $) due to the single inversion in the master stage. The two inverters in the slave stage act as a buffer to stabilize the output.",
        "format": "markdown",
        "sha256": "137f0333b84683f59a6bf58231fb0e16b8f4a4e6140920b07d503d9c16d247e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes clocked latch/master-slave elements, but misses the circuit’s defining feedback and divide-by-two function, incorrectly identifying it as an inverted-output D flip-flop.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1463,
        "output_tokens": 8977,
        "total_tokens": 10440,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8203,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1463,
        "output_tokens": 8977,
        "total_tokens": 10440,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8203,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The arrangement in the figure is a **3-stage inverter chain** with the following structure and behavior:\n\n---\n\n### **Circuit Description**\n- **Input**: Clock signal **CK** is fed into the first inverter (**Inv₁**).\n- **Intermediate Nodes**: \n  - The output of **Inv₁** is labeled **$\\overline{CK}$** (inverted CK).\n  - This signal is then passed through two additional inverters.\n- **Final Output**: The output of the third inverter is **$\\overline{CK}$** (since 3 inverters = odd number, the final output inverts the input).\n\n---\n\n### **Signal Propagation**\n| Stage | Input Signal | Output Signal | Function          |\n|-------|--------------|---------------|-------------------|\n| 1     | CK           | $\\overline{CK}$ | Inversion         |\n| 2     | $\\overline{CK}$ | CK          | Inversion (restores) |\n| 3     | CK           | $\\overline{CK}$ | Inversion         |\n\n**Result**: The chain acts as a **delayed inverter** (3-stage delay), with the final output being **$\\overline{CK}$** (inverted CK) with a propagation delay of **3 × inverter delay**.\n\n---\n\n### **Key Observations**\n1. **No Feedback Loop**: The circuit is a **linear chain**, not a ring oscillator (which requires feedback). Thus, it does **not** generate a clock signal autonomously.\n2. **Purpose**:\n   - Likely used for **signal buffering**, **delay compensation**, or **testability** (e.g., in scan chains or timing analysis).\n   - The labeled nodes (e.g., **$\\overline{CK}$**) may indicate test points for debugging or monitoring intermediate signals.\n3. **Odd Number of Inverters**: Ensures the final output is inverted relative to the input (unlike an even number, which would preserve the input signal).\n\n---\n\n### **Conclusion**\nThis is a **3-stage inverter delay chain** that inverts the input clock signal (**CK → $\\overline{CK}$**) with a cumulative delay. It is **not an oscillator** (no feedback) but may serve as a **delay element** or **test structure** in digital circuits. The labeled **$\\overline{CK}$** node confirms the first inverter’s output, validating the expected signal flow.",
        "format": "markdown",
        "sha256": "ff85e5cd482a97e9614e964e8c784d2275f4162121d37c953251496210bf23f5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a linear inverter chain and misses its essential function: a divide-by-two built from dynamic latches.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1463,
        "output_tokens": 1864,
        "total_tokens": 3327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1463,
        "output_tokens": 1864,
        "total_tokens": 3327,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the figure represents a **clock signal path with a chain of three inverters**, analyzing the propagation and transformation of the input clock signal **CK**. Here's the breakdown:\n\n---\n\n### **1. Signal Flow & Component Roles**\n- **Input**: The leftmost switch is labeled **CK**, indicating the primary clock signal input.\n- **First Inverter (Inv₁)**: \n  - Takes **CK** as input and produces **\\(\\overline{CK}\\)** (inverted clock) at its output.\n  - The switch labeled **\\(\\overline{CK}\\)** is likely a **test point** or connection node for this inverted signal.\n- **Subsequent Inverters**:\n  - The \\(\\overline{CK}\\) signal then passes through **two additional inverters** (not explicitly labeled but implied by the diagram).\n  - Each inverter flips the signal:\n    - **First additional inverter**: \\(\\overline{CK} \\rightarrow CK\\)\n    - **Second additional inverter**: \\(CK \\rightarrow \\overline{CK}\\)\n\n---\n\n### **2. Final Output**\n- **Total Inversions**: 3 (odd number).\n  - **CK → \\(\\overline{CK}\\) → CK → \\(\\overline{CK}\\)**\n  - **Result**: The final output is **\\(\\overline{CK}\\)** (same as the output of Inv₁).\n- **Purpose of 3 Inverters**:\n  - While a single inverter would suffice for inversion, **three inverters** introduce **propagation delay** (each inverter adds ~1–2 ns delay in typical CMOS logic).\n  - This delay is intentional for:\n    - **Clock synchronization** (e.g., aligning signals in a clock tree).\n    - **Delay compensation** (e.g., matching path lengths in a circuit).\n    - **Buffering** (driving higher fan-out loads with minimal distortion).\n\n---\n\n### **3. Switches (CK and \\(\\overline{CK}\\))**\n- These are **not physical switches** but **signal labels** at key nodes:\n  - **CK**: Input clock signal.\n  - **\\(\\overline{CK}\\)**: Output of Inv₁ (inverted clock).\n- They serve as **test points** or **intermediate signal references** for debugging or monitoring.\n\n---\n\n### **4. Functional Interpretation**\n- **Clock Delay Line**: The circuit acts as a **delayed inverter chain**, where the output \\(\\overline{CK}\\) is a **delayed version** of the inverted input clock.\n- **Odd Number of Inverters**: Ensures the output is **inverted** (unlike an even number, which would restore the original signal).\n- **Typical Use Case**: Common in:\n  - **Clock distribution networks** (to balance delays across a chip).\n  - **Ring oscillators** (if feedback were added, though not shown here).\n  - **Pulse generation** (e.g., creating a short pulse from a clock edge).\n\n---\n\n### **5. Summary of Key Points**\n| **Component**       | **Role**                          | **Signal**       |\n|---------------------|-----------------------------------|------------------|\n| Input Switch (CK)   | Clock signal source               | \\(CK\\)           |\n| Inv₁                | First inversion                   | \\(\\overline{CK}\\)|\n| Switch (\\(\\overline{CK}\\)) | Test point for inverted clock | \\(\\overline{CK}\\)|\n| 2nd Inverter        | Second inversion                  | \\(CK\\)           |\n| 3rd Inverter        | Third inversion                   | \\(\\overline{CK}\\)|\n\n**Final Output**: \\(\\overline{CK}\\) (inverted clock with **3× propagation delay**).\n\n---\n\n### **Conclusion**\nThis arrangement is a **delayed clock inverter chain** using **three inverters** to:\n1. Invert the input clock signal (**CK → \\(\\overline{CK}\\)**).\n2. Introduce **controlled delay** (critical for timing synchronization in digital circuits).\n3. Provide **intermediate signal access** (via the labeled switches/test points).\n\n**Practical Application**: Often used in **clock trees** of microprocessors or ASICs to ensure consistent clock arrival times across a chip. The odd number of inverters ensures the output remains inverted, while the delay compensates for path mismatches.",
        "format": "markdown",
        "sha256": "2c7e6f10226f9b296fd810892d1988665e33aede876642b8f6aa671d18611c59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as an inverter delay chain and misses its essential function: a divide-by-two built from dynamic latches.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1463,
        "output_tokens": 3749,
        "total_tokens": 5212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2869,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1463,
        "output_tokens": 3749,
        "total_tokens": 5212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2869,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the circuit **inverts the input clock signal (CK)** to produce its complementary signal (\\(\\overline{CK}\\)). This inversion is critical for generating a **non-overlapping or phase-shifted clock signal**, which is often required in sequential logic circuits (e.g., for flip-flop control, race condition avoidance, or synchronizing operations between stages).  \n\nBy providing \\(\\overline{CK}\\), the inverter enables the circuit to use both the original and inverted clock signals for precise timing control, ensuring stable operation and avoiding issues like clock skew or glitches. In summary, it **enables the generation of a complementary clock signal**, which is essential for proper synchronization and performance in many digital circuits.",
        "format": "markdown",
        "sha256": "e096810fe3243b959f50773e4e794975db2247008c55bc7fa2332a55ccf270cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the red inverter as a clock inverter; it is a feedforward data path that bypasses part of the first latch, improving speed but raising the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 347,
        "total_tokens": 1606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 347,
        "total_tokens": 1606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 200,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the circuit **inverts the input clock signal (CK) to generate its complement (CK̄)**, introducing a **propagation delay** between CK and CK̄. This delay has several performance implications:\n\n1. **Clock Skew**: The red inverter creates a time lag between CK and CK̄. In clocked circuits (e.g., latches or flip-flops), this skew can misalign control signals for transmission gates or other components, potentially violating **setup/hold time requirements**. For example, if CK̄ arrives too late, a transmission gate controlled by CK̄ might close *after* the gate controlled by CK opens, causing **signal contention** or **incorrect data sampling**.\n\n2. **Reduced Maximum Frequency**: The added delay from the inverter increases the **clock-to-Q delay** or **propagation delay** in the circuit. This shortens the available time for data to propagate through combinational logic, limiting the circuit’s **maximum operating frequency** (reducing performance).\n\n3. **Power and Noise Considerations**: While inverters themselves consume minimal power, the delay may require larger transistors (for faster switching) or additional buffering, increasing **power consumption** and **signal noise** (e.g., glitches due to timing mismatches).\n\n4. **Functional Dependence**: If the circuit *relies* on CK̄ (e.g., for complementary control in transmission gates), the inverter is **necessary for correct operation**. However, its delay must be carefully managed (e.g., via sizing or layout) to avoid performance degradation.\n\n**Key Impact**: The red inverter **degrades timing margins** by introducing skew and delay, which can **limit speed** or **cause functional errors** if not accounted for in design. In high-speed circuits, this delay might necessitate compensating techniques (e.g., non-overlapping clock generation) to maintain robustness.",
        "format": "markdown",
        "sha256": "0b149a5a7e1573ed4495fce22a57414a2545ae629791bbc70b149820e23fdbb1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a clock inverter generating CK̄. It misses the actual feedforward path, which bypasses part of the first latch, improves high-speed operation, and raises the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 2141,
        "total_tokens": 3400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 2141,
        "total_tokens": 3400,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter in the circuit **inverts the clock signal (CK)** before feeding it back into the loop. This inversion introduces a **phase shift and propagation delay** in the feedback path. In clocked digital circuits (e.g., flip-flops or latches), such feedback with an inverter can:  \n\n- **Disrupt timing**: The added delay may cause race conditions if the feedback signal does not stabilize before the next clock edge.  \n- **Alter signal polarity**: The inverted clock signal can change the logic behavior of downstream components (e.g., affecting when transistors switch in a latch).  \n- **Impact stability**: In oscillatory or memory circuits, the inverter’s delay might influence whether the circuit operates as intended (e.g., preventing a stable state or enabling unintended oscillations).  \n\nIn summary, the red inverter modifies the phase and timing of the feedback signal, which can compromise the circuit’s reliability or intended functionality if not properly accounted for in the design.",
        "format": "markdown",
        "sha256": "e143ad295afdc803b1b12688fbe45d18925008db795fb2bce1f6bc59e62e3a4e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the red inverter as inverting CK and gives only generic timing claims. It misses the actual unclocked feedforward path, its speed benefit, and the low-frequency drawback that raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 399,
        "total_tokens": 1658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1259,
        "output_tokens": 399,
        "total_tokens": 1658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer provided is **partially correct but contains a subtle inaccuracy** in its phrasing. Here's the breakdown:\n\n---\n\n### **1. Circuit Context**\nThe diagram shows a **dynamic logic stage** (likely part of a flip-flop or latch) with:\n- A clock signal `CK` driving a transmission gate (or similar switch).\n- An inverter `Inv₁` in the data path.\n- A **red inverter** connected in a feedback loop.\n\nThis configuration is typical of a **dynamic latch with a keeper circuit**. In dynamic logic, the output node can **float** when the clock is inactive (e.g., `CK = 0`), leading to **leakage-induced charge loss** over time. To prevent this, a **keeper circuit** (a pair of cross-coupled inverters) is used to **statically hold the node state** during the inactive phase.\n\n---\n\n### **2. Role of the Red Inverter**\n- The red inverter **is not the keeper itself** but **forms one half of the keeper latch**.\n- A **cross-coupled latch** requires **two inverters** in a feedback loop. Here, the red inverter and `Inv₁` are likely connected such that:\n  - The output of `Inv₁` drives the input of the red inverter.\n  - The output of the red inverter drives the input of `Inv₁`.\n- This creates a **static latch** that **maintains the node state** when the clock is inactive, acting as a **keeper**.\n\nThus, the **keeper is the entire latch (red inverter + `Inv₁`)**, not just the red inverter. The red inverter **enables the keeper functionality** by completing the feedback loop.\n\n---\n\n### **3. Does It Remove the Minimum Clock Frequency Requirement?**\n- **Yes.** In dynamic circuits **without a keeper**, the node voltage can degrade due to leakage, requiring the clock to toggle **fast enough** to refresh the state (minimum frequency constraint).\n- With a keeper, the latch **statically holds the value**, eliminating the need for a minimum clock frequency to counteract leakage. The circuit can operate at **arbitrarily low frequencies** (or even stop the clock) without losing state.\n\n---\n\n### **4. Agreement with the Answer**\n- **✅ Correct:** The red inverter **participates in forming a cross-coupled latch** with `Inv₁`, which acts as a keeper.\n- **❌ Incorrect:** The red inverter **does not \"act as a keeper\" alone**—it is **part of the keeper latch**. The keeper is the **entire latch**, not a single inverter.\n\n---\n\n### **5. Clarified Answer**\n> **No, the phrasing is slightly misleading.**  \n> The **red inverter is one half of a cross-coupled latch** (with `Inv₁`), which **together form the keeper**. This keeper **eliminates the minimum clock frequency requirement** by statically maintaining the node state during the inactive phase, preventing leakage-induced state loss.  \n> **The red inverter’s role is to enable the keeper latch**, not to act as the keeper itself.\n\n---\n\n### **Final Verdict**\n- **Agreement:** Partially. The core idea (keeper latch removes min frequency constraint) is correct.\n- **Correction:** The red inverter **is part of the keeper latch**, not the keeper itself. The keeper is the **combination of the red inverter and `Inv₁`**.",
        "format": "markdown",
        "sha256": "9ce6e2b7a698cf0209fc03bcca3d0e2021a8d95a785cf97cc476d321494ec67d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It incorrectly treats the red inverter as part of a cross-coupled keeper with Inv1 and claims this removes the minimum-frequency limit. The red inverter is instead an unclocked feedforward branch that bypasses part of the latch path; at low clock rates it can overpower the intended behavior and raise the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 2162,
        "total_tokens": 3464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 2162,
        "total_tokens": 3464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The answer is **partially correct but imprecise**. Here's the detailed breakdown:\n\n### **Role of the Red Inverter**\n1. **Feedback Path**: The red inverter is connected in a *feedback loop* from the output of the second switch (node after `Inv₁`) back to the input of `Inv₁`. This forms a **cross-coupled latch** with `Inv₁` (since `Inv₁` and the red inverter are mutually connected in a loop: `Inv₁`'s output drives the red inverter, and the red inverter's output drives `Inv₁`'s input).\n\n2. **Keeper Function**: In dynamic logic circuits (e.g., dynamic registers or latches), a **keeper** is a weak inverter that provides *positive feedback* to maintain the state of a floating node when the clock is inactive (e.g., `CK = 0`). The red inverter here acts as this keeper. When the switches (controlled by `CK`) are open (during the hold phase), the input node of `Inv₁` would otherwise float due to leakage. The keeper (red inverter) prevents this by reinforcing the stored value, effectively forming a **static latch** during the hold phase.\n\n3. **Removing Minimum Clock Frequency Requirement**:  \n   - **Without a keeper**: In pure dynamic logic, the node charge leaks over time. To prevent data loss, the clock must toggle frequently enough to refresh the node (i.e., a *minimum clock frequency* is required).  \n   - **With a keeper/latch**: The cross-coupled latch (formed by `Inv₁` and the red inverter) *statically holds* the value when `CK` is inactive. This eliminates the need for frequent clock toggling, as the state is maintained even with leakage. Thus, the **minimum clock frequency requirement is removed**.\n\n---\n\n### **Why the Answer is *Partially* Correct**\n- **Agreement**: The red inverter *does* form a cross-coupled latch with `Inv₁` and acts as a keeper, eliminating the minimum clock frequency requirement due to leakage.  \n- **Imprecision**: The answer conflates the *keeper* (a weak feedback inverter) with the *latch* (a pair of cross-coupled inverters). While the red inverter is part of the latch, its *primary role* is as a **keeper**—a specific design element to combat leakage. The latch is the *result* of this feedback, not the sole purpose of the red inverter.\n\n---\n\n### **Actual Role of the Red Inverter**\nThe red inverter **is a keeper** that, together with `Inv₁`, forms a **static latch** during the hold phase (`CK = 0`). This latch:\n- Maintains the state of the input node to `Inv₁` when the clock is inactive.\n- Prevents leakage-induced voltage degradation.\n- **Eliminates the need for a minimum clock frequency**, as the state is no longer dependent on periodic refreshing.\n\n---\n\n### **Conclusion**\n**Yes, you can agree with the core claim**: The red inverter acts as a keeper, forming a cross-coupled latch with `Inv₁`, and this *does* remove the minimum clock frequency requirement due to leakage. However, the phrasing is slightly imprecise—the red inverter is *primarily* a keeper, and the latch is a consequence of its feedback. The answer is **correct in substance** but could be more precise in terminology.",
        "format": "markdown",
        "sha256": "5919f1bfaf3e87244d79779d0c3e3b45881af093b61c118b3bcc459f6f883eea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer repeats the incorrect keeper/cross-coupled-latch interpretation. The red inverter is a feedforward branch that bypasses part of the latch path; it can help at high clock rates but can overpower the intended behavior at low rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 2380,
        "total_tokens": 3682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 2380,
        "total_tokens": 3682,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1656,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The provided answer is **incorrect**. Here's why:\n\n---\n\n### **Understanding the Circuit Structure**\nFrom the diagram:\n- The **red inverter** takes **`CK`** as its input.\n- Its output drives the input of **`Inv₁`**.\n- The output of `Inv₁` is connected to a switch controlled by **`\\overline{CK}`**, followed by two additional inverters.\n\nThis structure **does not form a cross-coupled latch** with `Inv₁`. For a cross-coupled latch, the output of one inverter must feed into the input of the other, creating a feedback loop (e.g., `Inv₁` output → red inverter input, and red inverter output → `Inv₁` input). However, in this diagram:\n- The **red inverter’s input is tied to `CK` (a clock signal)**, not to the output of `Inv₁`.\n- Thus, **no feedback loop exists** between the red inverter and `Inv₁`.\n\n---\n\n### **Actual Role of the Red Inverter**\nThe red inverter is **not part of a latch**. Instead, it likely serves one of two purposes:\n1. **Clock Inversion or Buffering**:  \n   It may simply invert `CK` to generate `\\overline{CK}` (though the diagram already shows `\\overline{CK}` as a separate signal). Alternatively, it could buffer the clock signal for timing alignment.\n\n2. **Dynamic Logic Precharge Path**:  \n   In dynamic logic circuits (e.g., domino logic), the red inverter might be part of a **precharge network**. When `CK = 0`, the red inverter (if PMOS-based) could help precharge a node to `VDD`, while `CK = 1` enables evaluation. However, this still does **not** form a latch with `Inv₁`.\n\n---\n\n### **Why the Answer is Wrong**\n- **No Cross-Coupled Latch**:  \n  A cross-coupled latch requires **mutual feedback** between two inverters. Here, the red inverter’s input is external (`CK`), not connected to `Inv₁`’s output. Thus, **no latch is formed**.\n\n- **Keeper Circuit ≠ Cross-Coupled Latch**:  \n  A *keeper* (used in dynamic logic) is a **weak feedback inverter** that maintains a node’s state *during the evaluation phase* to combat leakage. It is **not a latch** (which is a bistable element). A keeper typically connects the node to its own inverse (e.g., via a weak inverter), but it does **not** form a cross-coupled pair with another inverter in the signal path.\n\n- **Minimum Clock Frequency Requirement**:  \n  Even with a keeper, **a minimum clock frequency is still required** in dynamic logic to prevent the node from discharging due to leakage *before* the next clock edge. A keeper *reduces* the sensitivity to leakage but does **not eliminate** the need for a minimum frequency. The claim that it \"removes the minimum clock frequency requirement\" is **false**.\n\n---\n\n### **Correct Role of the Red Inverter**\nThe red inverter is most likely:\n- **A clock inverter** (to generate `\\overline{CK}` for the switch), or  \n- **Part of a precharge/discharge path** in a dynamic logic stage.  \n\nIt **does not act as a keeper or form a latch with `Inv₁`**. If a keeper were present, it would be a **separate weak feedback inverter** (not the red one) connected to a dynamic node (e.g., between `Inv₁` and the `\\overline{CK}` switch).\n\n---\n\n### **Conclusion**\n- **Do you agree with the answer?**  \n  **No.** The red inverter does **not** form a cross-coupled latch with `Inv₁`, and a keeper (if present) does **not** remove the minimum clock frequency requirement.\n\n- **Actual role of the red inverter:**  \n  It is **not a keeper or latch component**. It likely inverts or buffers the clock signal (`CK`) for timing control in the circuit (e.g., enabling/disabling a precharge or evaluation phase). Any leakage mitigation would require a **separate, dedicated keeper circuit**, which is not depicted here.",
        "format": "markdown",
        "sha256": "48e86a2e7096c6e52c3ecddb7df4648e679124333d9b2d588d18da38cfd94206"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper/cross-coupled-latch claim, but misreads the red inverter’s connections and invents a clock-buffer/precharge role. It misses the actual feedforward bypass and its high-speed benefit/low-frequency failure tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 5177,
        "total_tokens": 6479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4274,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1302,
        "output_tokens": 5177,
        "total_tokens": 6479,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4274,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To **optimize the Noise Figure (NF)** of the given **common-source amplifier with resistive feedback (RF)** while keeping the **input resistance $ R_{\\text{in}} = 50 \\, \\Omega $**, the key is to **minimize the noise added by the circuit**—particularly from the input transistor $ M_1 $—without altering the input impedance constraint.\n\n---\n\n---\n\n### 🔍 **Understanding the Circuit and Constraints**\n- The circuit is a **common-source amplifier** with:\n  - Input coupling capacitor $ C_1 $\n  - Series input resistor $ R_{\\text{in}} = 50 \\, \\Omega $\n  - Feedback resistor $ R_F $ from drain to gate of $ M_1 $\n  - Active load (current mirror) formed by $ M_1 $ (NMOS) and $ M_2 $ (PMOS)\n- **Constraint**: $ R_{\\text{in}} = 50 \\, \\Omega $ must remain fixed.\n\nFrom small-signal analysis, the **input resistance** of the amplifier stage (excluding $ R_{\\text{in}} $) is:\n$$\nR_{\\text{in,stage}} = \\frac{R_F}{1 + A}\n$$\nwhere $ A = g_m R_L $ is the open-loop gain, with:\n- $ g_m $: transconductance of $ M_1 $\n- $ R_L $: equivalent load resistance at the drain (from $ M_2 $'s output resistance)\n\nGiven that the total input resistance is $ R_{\\text{in}} = 50 \\, \\Omega $, and assuming $ R_{\\text{in}} $ is the **total input resistance** (i.e., $ R_{\\text{in,stage}} = 50 \\, \\Omega $), we have:\n$$\nR_F = R_{\\text{in}} (1 + A) = 50(1 + g_m R_L)\n$$\n\nThis relationship ensures the input impedance remains at $ 50 \\, \\Omega $, as required.\n\n---\n\n---\n\n### 📉 **Noise Figure (NF) Analysis**\nThe **Noise Figure** is defined as:\n$$\nNF = 1 + \\frac{N_{\\text{added}}}{G \\cdot N_{\\text{source}}}\n$$\nWhere:\n- $ N_{\\text{source}} = 4kTR_s \\Delta f $: noise power from the source (assumed $ R_s = 50 \\, \\Omega $)\n- $ G $: available power gain\n- $ N_{\\text{added}} $: noise added by the circuit\n\nFor this circuit, the **dominant noise sources** are:\n1. **Thermal noise from $ R_{\\text{in}} $**: $ v_{n,R_{\\text{in}}}^2 = 4kTR_{\\text{in}} \\Delta f $\n2. **Thermal noise from $ R_F $**: $ v_{n,R_F}^2 = 4kTR_F \\Delta f $\n3. **Channel thermal noise from $ M_1 $**: $ i_{n,M_1}^2 = 4kT \\gamma g_m \\Delta f $, where $ \\gamma \\approx \\frac{2}{3} $ for long-channel devices\n\nAfter referring all noise to the input and simplifying under the assumption $ A \\gg 1 $ (high open-loop gain), the **Noise Figure** becomes:\n$$\nNF \\approx 2 + \\frac{1}{A} + \\frac{2\\gamma}{25 g_m}\n$$\n\n---\n\n---\n\n### ✅ **Optimization Strategy for Minimum NF**\n\nTo **minimize NF**, we must **maximize $ g_m $** (transconductance of $ M_1 $) and **ensure $ A = g_m R_L \\gg 1 $**.\n\n#### 🔹 **Why Maximize $ g_m $?**\n- The term $ \\frac{2\\gamma}{25 g_m} $ decreases as $ g_m $ increases.\n- Higher $ g_m $ also increases $ A $, reducing the $ \\frac{1}{A} $ term.\n- Thus, **both terms in the NF expression are minimized when $ g_m $ is maximized**.\n\n#### 🔹 **How to Maximize $ g_m $?**\n- **Increase $ W/L $ ratio** of $ M_1 $: $ g_m \\propto \\sqrt{W/L} $\n- **Increase bias current $ I_D $** of $ M_1 $: $ g_m \\propto \\sqrt{I_D} $\n- **Use a process with high mobility $ \\mu $** and high oxide capacitance $ C_{ox} $\n\n#### 🔹 **Maintain $ R_{\\text{in}} = 50 \\, \\Omega $**\n- Since $ R_F = 50(1 + g_m R_L) $, increasing $ g_m $ or $ R_L $ increases $ R_F $, but this does not violate the constraint.\n- $ R_L $ is determined by the output resistance of $ M_2 $: $ R_L = r_{o2} = \\frac{1}{\\lambda I_D} $\n  - To keep $ R_L $ high, use **longer channel lengths** (lower $ \\lambda $) or **lower $ I_D $** (but this reduces $ g_m $).\n  - However, **increasing $ g_m $ via higher $ W/L $ and $ I_D $** is more effective for NF reduction than optimizing $ R_L $.\n\n#### 🔹 **Practical Steps to Optimize NF**\n1. **Maximize $ g_m $ of $ M_1 $**:\n   - Use a **large $ W/L $** (e.g., $ W/L = 100/0.18 $ in 180 nm CMOS)\n   - Apply **sufficient bias current $ I_D $** (e.g., 1–10 mA, depending on technology)\n2. **Design $ M_2 $ for high $ r_{o} $**:\n   - Use a **longer channel length** for $ M_2 $ to increase $ r_{o2} $\n   - Match $ I_D $ of $ M_2 $ to $ M_1 $ for proper current mirror operation\n3. **Set $ R_F $ accordingly**:\n   - Compute $ R_F = 50(1 + g_m R_L) $ to maintain $ R_{\\text{in}} = 50 \\, \\Omega $\n   - Ensure $ R_F $ is physically realizable (not excessively large)\n4. **Minimize other noise contributions**:\n   - Use **low-noise process** (e.g., avoid short-channel devices with high $ \\gamma $)\n   - Reduce **flicker noise** by operating at higher frequencies or using larger devices\n\n---\n\n---\n\n### 🎯 **Conclusion: How to Optimize NF with $ R_{\\text{in}} = 50 \\, \\Omega $**\n\n> **To minimize the Noise Figure while keeping $ R_{\\text{in}} = 50 \\, \\Omega $:**\n> \n> ✅ **Maximize the transconductance $ g_m $ of $ M_1 $** by:\n> - **Increasing the width-to-length ratio $ W/L $** of $ M_1 $\n> - **Increasing the bias current $ I_D $** of $ M_1 $\n> \n> ✅ **Ensure high open-loop gain $ A = g_m R_L $** by:\n> - Using a **long-channel $ M_2 $** to maximize $ R_L = r_{o2} $\n> \n> ✅ **Set $ R_F = 50(1 + g_m R_L) $** to maintain $ R_{\\text{in}} = 50 \\, \\Omega $\n>\n> This approach **reduces the noise contribution from $ M_1 $** and **minimizes the NF**, as both $ \\frac{1}{A} $ and $ \\frac{2\\gamma}{25 g_m} $ are minimized when $ g_m $ is maximized.\n\n---\n\n### 📌 Final Answer:\n> **To optimize the circuit for minimum Noise Figure (NF) while keeping $ R_{\\text{in}} = 50 \\, \\Omega $, maximize the transconductance $ g_m $ of $ M_1 $ by increasing its $ W/L $ ratio and bias current. Adjust $ R_F $ to $ R_F = 50(1 + g_m R_L) $ to maintain the input resistance constraint. This reduces the dominant noise contributions from $ M_1 $ and minimizes NF.**",
        "format": "markdown",
        "sha256": "96db6dabc248a2d90b00c4ea8ca27d9bf78bac562a9e792d33fa905dbf2f25b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct broad direction—raise gm and adjust RF to keep the input match—but misses the decisive finite-output-resistance mechanism. It misidentifies the inverter topology, uses RF/(1+gmRL) rather than the finite-ro input-resistance relation, and gives a noise expression that does not capture NF falling below 1+γ. These are substantial errors despite the correct optimization direction.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 17882,
        "total_tokens": 19826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 17882,
        "total_tokens": 19826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16062,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To **optimize the Noise Figure (NF)** of the given circuit **while keeping $ R_{\\text{in}} = 50 \\, \\Omega $ fixed**, the key is to **minimize the amplifier’s input-referred noise** relative to the source noise. Since $ R_{\\text{in}} $ is a fixed resistor in the input network (not the source resistance), we must focus on **reducing the noise contributions from the feedback resistor $ R_F $ and the transistors $ M_1 $ and $ M_2 $** while maintaining the input impedance constraint.\n\n---\n\n### 🔍 **Core Insight: Noise Figure in Feedback Amplifiers**\nIn a feedback amplifier:\n- The **loop gain** $ T $ suppresses noise from the feedback network (e.g., $ R_F $) and the amplifier itself.\n- The **input-referred noise** from $ R_F $ is reduced by a factor of $ (1 + T) $.\n- The **transistor noise** (from $ M_1 $) is also reduced by $ (1 + T) $, but the dominant term for NF is still the **transconductance $ g_m $** of the input transistor $ M_1 $, as it directly impacts the input-referred noise.\n\nFor a **matched input** (where the source impedance is 50 Ω, and the circuit's input impedance is also 50 Ω due to $ R_{\\text{in}} $), the **minimum NF** is approximately:\n\n$$\n\\text{NF} \\approx 1 + \\frac{\\gamma}{g_m \\cdot R_s}\n$$\n\nwhere:\n- $ \\gamma \\approx 2/3 $ (for long-channel MOSFETs),\n- $ R_s = 50 \\, \\Omega $ (source resistance),\n- $ g_m $ is the transconductance of $ M_1 $.\n\nThus, **to minimize NF**, we must **maximize $ g_m \\cdot R_s $**, which simplifies to **maximizing $ g_m $** since $ R_s $ is fixed.\n\n---\n\n### 🎯 **Optimization Strategy**\n\n#### ✅ **1. Maximize $ g_m $ of $ M_1 $**\nThe transconductance of a MOSFET in saturation is:\n\n$$\ng_m = \\sqrt{2 \\mu C_{\\text{ox}} \\frac{W}{L} I_D}\n$$\n\nTo **maximize $ g_m $**:\n- **Increase $ W/L $**: Use a **wider transistor** (larger $ W $) or **shorter channel length** (smaller $ L $).\n- **Increase $ I_D $**: Operate $ M_1 $ at a **higher drain current**, which can be achieved by:\n  - Increasing $ W/L $,\n  - Increasing the overdrive voltage $ V_{\\text{ov}} $ (i.e., $ V_{GS} - V_{TH} $).\n\n> 🔹 **Note**: $ g_m $ scales with $ \\sqrt{W/L \\cdot I_D} $, so both $ W/L $ and $ I_D $ should be maximized within practical limits (e.g., power dissipation, saturation constraints).\n\n#### ✅ **2. Minimize Feedback Resistor $ R_F $**\n- $ R_F $ contributes **thermal noise** $ \\overline{v_n^2} = 4kTR_F \\Delta f $.\n- This noise is **referred to the input** as $ \\frac{v_n}{1 + T} $, where $ T $ is the **loop gain**.\n- **Loop gain $ T $** is proportional to $ g_m \\cdot (r_{o1} \\parallel r_{o2}) \\cdot \\frac{R_{\\text{in}}}{R_{\\text{in}} + R_F} $.\n- To **maximize $ T $**:\n  - **Minimize $ R_F $** → increases $ \\frac{R_{\\text{in}}}{R_{\\text{in}} + R_F} $,\n  - **Maximize $ g_m $** (as above),\n  - **Maximize $ r_o $** (output resistance), which is inversely proportional to $ I_D $. However, this conflicts with maximizing $ g_m $, but **$ g_m \\cdot r_o $ is independent of $ I_D $** and depends only on $ V_{\\text{ov}} $.\n\n> 🔹 **Key Trade-off**: While $ r_o $ decreases with $ I_D $, the product $ g_m \\cdot r_o $ is **independent of $ I_D $** and depends only on $ V_{\\text{ov}} $. Thus, **minimizing $ V_{\\text{ov}} $** maximizes $ g_m \\cdot r_o $, but **increasing $ V_{\\text{ov}} $** maximizes $ g_m $.\n\n> ✅ **Resolution**: For **NF optimization**, **maximizing $ g_m $** dominates over $ r_o $, so **prioritize higher $ g_m $** (via larger $ W/L $ and $ I_D $) and **minimize $ R_F $** to maximize loop gain and suppress feedback noise.\n\n#### ✅ **3. Ensure Saturation**\n- $ M_1 $ must remain in **saturation**: $ V_{DS} > V_{\\text{ov}} $.\n- $ M_2 $ (PMOS load) must also be in saturation: $ V_{DD} - V_{DS} > |V_{\\text{ov},M2}| $.\n- Choose $ V_{\\text{ov}} $ as large as possible within the supply voltage $ V_{DD} $ to maximize $ g_m $.\n\n#### ✅ **4. Minimize $ \\gamma $ (Noise Parameter)**\n- Use **long-channel devices** (if possible) to keep $ \\gamma \\approx 2/3 $.\n- Avoid short-channel effects that increase $ \\gamma $ (e.g., hot-carrier noise).\n\n---\n\n### 📌 **Final Optimization Steps**\n\n| **Parameter** | **Action** | **Reason** |\n|--------------|------------|------------|\n| $ W/L $ of $ M_1 $ | **Maximize** | Increases $ g_m $ |\n| $ I_D $ of $ M_1 $ | **Maximize** (within power limits) | Increases $ g_m $ |\n| $ V_{\\text{ov}} $ | **Maximize** (within $ V_{DD} $) | Increases $ g_m $ |\n| $ R_F $ | **Minimize** (e.g., to 1–10 Ω) | Maximizes loop gain, suppresses feedback noise |\n| $ M_2 $ size | Match to $ M_1 $ for balanced noise | Minimizes $ M_2 $ noise contribution |\n\n---\n\n### ✅ **Conclusion**\n\nTo **optimize the Noise Figure (NF)** of the circuit **with $ R_{\\text{in}} = 50 \\, \\Omega $ fixed**:\n\n> **Maximize the transconductance $ g_m $ of the input transistor $ M_1 $** by:\n> - **Increasing its width-to-length ratio $ W/L $**,\n> - **Operating it at a higher drain current $ I_D $** (via larger $ W/L $ or higher overdrive voltage $ V_{\\text{ov}} $),\n> - **Ensuring it remains in saturation**,\n>\n> **and minimize the feedback resistor $ R_F $** to **maximize the loop gain**, which suppresses the noise contribution from $ R_F $.\n\nThis combination **reduces the input-referred noise** and **minimizes the Noise Figure** while maintaining the required input resistance.\n\n---\n\n### 🏁 **Answer**\nTo optimize the circuit for **Noise Figure (NF)** with $ R_{\\text{in}} = 50 \\, \\Omega $ fixed:\n- **Maximize the transconductance $ g_m $ of $ M_1 $** by increasing its $ W/L $ ratio and operating it at a higher drain current (e.g., via larger $ W/L $ or higher $ V_{\\text{ov}} $).\n- **Minimize $ R_F $** to maximize loop gain and suppress feedback noise.\n- Ensure $ M_1 $ and $ M_2 $ remain in saturation.\n\n**Result**: Higher $ g_m $ and lower $ R_F $ reduce input-referred noise, minimizing NF while keeping $ R_{\\text{in}} = 50 \\, \\Omega $.",
        "format": "markdown",
        "sha256": "33666d54e5f0a84ab13ad8205f1d8b77c835086598898facf81b3ae2b312f53a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies that increasing gm can reduce NF, and its approximate NF expression matches the large-intrinsic-gain limit. But it misses the finite-ro input-match relation and incorrectly recommends minimizing RF; to keep Rin at 50 ohms as gm rises, RF must be increased accordingly.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 14013,
        "total_tokens": 15957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 14013,
        "total_tokens": 15957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12235,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the **noise figure (NF)** of the given **common-source MOSFET amplifier with shunt-shunt feedback** while keeping the **input resistance $ R_{\\text{in}} = 50\\ \\Omega $**, follow this structured approach:\n\n---\n\n### 🔍 **Key Observations from the Circuit**\n- The circuit is a **common-source amplifier** with **shunt-shunt feedback** via resistor $ R_F $.\n- $ R_{\\text{in}} = 50\\ \\Omega $ is a **fixed resistor** connected from the input node to ground, setting the **input resistance** of the circuit to match standard RF systems (e.g., 50 Ω source).\n- $ C_1 $ provides AC coupling, so it does not affect noise analysis at the operating frequency.\n- $ M_1 $ (NMOS) is the main amplifying transistor, and $ M_2 $ (PMOS) acts as an active load.\n- $ R_F $ is used for **DC biasing** (to set the gate voltage of $ M_1 $) and **feedback**, but its **AC behavior** affects noise performance.\n\n---\n\n### 📌 **Noise Figure (NF) Basics**\nThe **noise figure** is defined as:\n$$\n\\text{NF} = \\frac{\\text{Total Output Noise Power}}{\\text{Output Noise Power Due to Source}}\n$$\nFor a matched system ($ R_s = R_{\\text{in}} = 50\\ \\Omega $), NF is minimized when the **circuit’s input-referred noise** is minimized relative to the **source noise**.\n\nThe **input-referred noise voltage squared** ($ v_n^2 $) from the circuit includes:\n1. **Thermal noise from $ R_F $** (feedback resistor)\n2. **Channel thermal noise from $ M_1 $** (dominant in MOSFETs)\n3. **Noise from $ M_2 $** (typically negligible if $ M_2 $ is a high-impedance current source)\n\n---\n\n### 🧠 **Noise Contributions**\n#### 1. **Thermal Noise from $ R_F $**\n- Noise current: $ i_{n,R_F} = \\sqrt{\\frac{4kT \\Delta f}{R_F}} $\n- Referred to input: $ v_{n,R_F} = i_{n,R_F} \\cdot R_{\\text{in}} = \\sqrt{\\frac{4kT \\Delta f}{R_F}} \\cdot 50 $\n- **To minimize this**, **maximize $ R_F $** (e.g., $ R_F \\geq 1\\ \\text{M}\\Omega $).\n\n> ✅ **Why?** A larger $ R_F $ reduces the thermal noise current, and since $ R_{\\text{in}} = 50\\ \\Omega $ is fixed, the input-referred noise from $ R_F $ becomes negligible.\n\n#### 2. **Channel Thermal Noise from $ M_1 $**\n- Drain current noise: $ i_{n,M_1} = \\sqrt{4kT \\gamma g_{m1} \\Delta f} $\n- Input-referred noise voltage: $ v_{n,M_1} = \\frac{i_{n,M_1}}{g_{m1}} = \\sqrt{\\frac{4kT \\gamma \\Delta f}{g_{m1}}} $\n- **To minimize this**, **maximize $ g_{m1} $** (transconductance of $ M_1 $).\n\n> ✅ **How?** Increase $ g_{m1} $ by:\n> - **Increasing the bias current $ I_D $** (since $ g_m = \\sqrt{2 \\mu C_{\\text{ox}} \\frac{W}{L} I_D} $)\n> - **Increasing the aspect ratio $ \\frac{W}{L} $** of $ M_1 $\n\n#### 3. **Noise from $ M_2 $**\n- $ M_2 $ is a PMOS current source. Its noise contribution is usually **small** compared to $ M_1 $ if:\n  - $ M_2 $ is biased in saturation.\n  - Its output resistance $ r_{o2} $ is large (minimizing its thermal noise).\n- **Negligible** for optimization purposes.\n\n---\n\n### 🎯 **Optimization Strategy**\nGiven that $ R_{\\text{in}} = 50\\ \\Omega $ **must remain fixed**, the only tunable parameters are:\n- **$ R_F $**: Feedback resistor\n- **$ g_{m1} $**: Transconductance of $ M_1 $\n\n#### ✅ **Step 1: Maximize $ R_F $**\n- Set $ R_F $ to a **very large value** (e.g., $ R_F \\geq 1\\ \\text{M}\\Omega $).\n- This ensures:\n  - **Minimal thermal noise** from $ R_F $ (since $ \\frac{1}{R_F} \\to 0 $).\n  - **Negligible AC feedback effect** (so the circuit behaves like a standard common-source amplifier).\n  - **DC biasing is maintained** (required for setting $ V_{GS} $ of $ M_1 $).\n\n#### ✅ **Step 2: Maximize $ g_{m1} $**\n- **Increase $ I_D $** (bias current of $ M_1 $):\n  - Higher $ I_D \\Rightarrow $ higher $ g_m $\n  - Trade-off: Higher power consumption, but **no constraint is given on power**.\n- **Increase $ \\frac{W}{L} $** of $ M_1 $:\n  - Larger device size increases $ g_m $ without increasing $ I_D $.\n  - Trade-off: Larger area, but **no area constraint is specified**.\n\n> 🔥 **Result**: As $ g_{m1} \\to \\infty $, the input-referred noise from $ M_1 $ approaches zero, and **NF approaches 1 (0 dB)**.\n\n---\n\n### 📉 **Noise Figure Expression (Simplified)**\nAssuming:\n- $ R_s = R_{\\text{in}} = 50\\ \\Omega $\n- $ R_F \\to \\infty $ (noise from $ R_F $ negligible)\n- Dominant noise source: $ M_1 $\n\nThen:\n$$\n\\text{NF} \\approx 1 + \\frac{\\gamma}{g_{m1} R_s} = 1 + \\frac{\\gamma}{50 \\cdot g_{m1}}\n$$\nWhere:\n- $ \\gamma \\approx \\frac{2}{3} $ (for long-channel MOSFETs; may be higher for short-channel)\n- $ R_s = 50\\ \\Omega $\n\nTo **minimize NF**, **maximize $ g_{m1} $**.\n\n---\n\n### ✅ **Final Optimization Steps**\n| **Parameter** | **Action** | **Reason** |\n|--------------|-----------|------------|\n| $ R_F $ | **Maximize** (e.g., $ R_F = 1\\ \\text{M}\\Omega $) | Minimizes thermal noise from $ R_F $ |\n| $ I_D $ of $ M_1 $ | **Increase** | Increases $ g_{m1} $ |\n| $ \\frac{W}{L} $ of $ M_1 $ | **Increase** | Increases $ g_{m1} $ without increasing $ I_D $ |\n| $ M_2 $ | Keep as high-impedance current source | Minimizes its noise contribution |\n\n---\n\n### 🏁 **Conclusion**\nTo **optimize the noise figure (NF)** while keeping $ R_{\\text{in}} = 50\\ \\Omega $:\n1. **Set $ R_F $ to a very large value** (e.g., $ R_F \\geq 1\\ \\text{M}\\Omega $) to **eliminate its thermal noise contribution**.\n2. **Maximize $ g_{m1} $** of $ M_1 $ by:\n   - Increasing its **bias current $ I_D $**\n   - Increasing its **aspect ratio $ \\frac{W}{L} $**\n\nThis minimizes the input-referred noise from $ M_1 $, which is the **dominant noise source** in the circuit, leading to the **lowest possible NF** under the given constraint.\n\n---\n\n### 📌 **Answer**\n> **To optimize the circuit for the lowest noise figure (NF) while keeping $ R_{\\text{in}} = 50\\ \\Omega $:**\n> - **Maximize $ R_F $** (e.g., $ R_F \\geq 1\\ \\text{M}\\Omega $) to suppress its thermal noise.\n> - **Maximize $ g_{m1} $** of $ M_1 $ by increasing its **bias current** and/or **aspect ratio $ \\frac{W}{L} $**.\n> \n> This minimizes the input-referred noise from $ M_1 $, which dominates NF, while maintaining the required input impedance.",
        "format": "markdown",
        "sha256": "a5e4005c33d99b3d311bf49865c62bd7eaef384c1b468242a0929b43992de064"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes that increasing transconductance can reduce channel-noise contribution, but it misidentifies the 50-ohm source resistance as a shunt resistor and never explains how to preserve the match. The feedback resistor must be adjusted using the finite-output-resistance input-impedance relation as gm increases; simply making RF very large does not keep Rin at 50 ohms.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 13331,
        "total_tokens": 15275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1944,
        "output_tokens": 13331,
        "total_tokens": 15275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the **input impedance** of the given circuit, we analyze the small-signal behavior at the input node where the current source $ I_{\\text{in}} $ is injected.\n\n---\n\n### **Circuit Overview**\n\n- The input node (let’s call it **node P**) is connected to:\n  - A **capacitor $ C_{\\text{in}} $** to ground,\n  - A **resistor $ R_{\\text{in}} $** to ground,\n  - The **gate of transistor $ M_1 $**.\n- The rest of the circuit (involving $ M_1, M_2, M_3 $, feedback resistor $ R_F $, etc.) forms a feedback amplifier that processes the signal from node P.\n\n---\n\n### **Key Insight**\n\nIn **MOSFET-based circuits**, the **gate of a transistor has extremely high input impedance** (ideally infinite in DC and very large in AC due to gate capacitance). This means that **no significant current flows into the gate** of $ M_1 $ under normal operating conditions. Therefore, the **dominant paths for the input current $ I_{\\text{in}} $** are through:\n\n- $ R_{\\text{in}} $\n- $ C_{\\text{in}} $\n\nThe **feedback path via $ R_F $** connects node P to the output $ V_{\\text{out}} $, but it does **not provide a direct path to ground**. Hence, it does **not contribute directly to the input impedance** seen by the current source $ I_{\\text{in}} $.\n\n---\n\n### **Small-Signal Analysis**\n\nLet $ v_p $ be the small-signal voltage at node P. The input current $ i_{\\text{in}} $ splits between:\n\n- $ R_{\\text{in}} $: current $ \\frac{v_p}{R_{\\text{in}}} $\n- $ C_{\\text{in}} $: current $ s C_{\\text{in}} v_p $\n\nSince the gate of $ M_1 $ has negligible small-signal current (due to its high impedance), the total input current is:\n\n$$\ni_{\\text{in}} = v_p \\left( \\frac{1}{R_{\\text{in}}} + s C_{\\text{in}} \\right)\n$$\n\nThus, the **input impedance** is:\n\n$$\nZ_{\\text{in}} = \\frac{v_p}{i_{\\text{in}}} = \\frac{1}{\\frac{1}{R_{\\text{in}}} + s C_{\\text{in}}}\n$$\n\nThis simplifies to:\n\n$$\nZ_{\\text{in}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}\n$$\n\n---\n\n### **Conclusion**\n\nThe input impedance of the circuit is determined solely by the **parallel combination of $ R_{\\text{in}} $ and $ C_{\\text{in}} $**, as the rest of the circuit presents a very high impedance at the input node (the gate of $ M_1 $).\n\n---\n\n### ✅ Final Answer:\n\n$$\n\\boxed{Z_{\\text{in}} = \\frac{R_{\\text{in}}}{1 + s R_{\\text{in}} C_{\\text{in}}}}\n$$",
        "format": "markdown",
        "sha256": "ad43bcae6f65f49b9acdc13d32d2dade954dd3905dee2c546e2741cfc6cce060"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer ignores the feedback path through RF, which is the dominant mechanism setting the input resistance. The required result is (RF + RD2)/(1 + A0); the claimed Rin–Cin parallel impedance does not match the circuit model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 235,
        "output_tokens": 13448,
        "total_tokens": 13683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 235,
        "output_tokens": 13448,
        "total_tokens": 13683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12770,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the **input impedance** of the given circuit, we analyze the small-signal behavior at the input node (node P), where the current source $ I_{\\text{in}} $ is applied. The input node is connected to:\n\n- A resistor $ R_{\\text{in}} $ and capacitor $ C_{\\text{in}} $ to ground,\n- A feedback resistor $ R_F $ to the output node $ V_{\\text{out}} $,\n- The gate of transistor $ M_1 $, which is part of a feedback loop.\n\n---\n\n### **Key Observations**\n\n1. **Input Node Configuration**:\n   - The input node (P) has a parallel combination of $ R_{\\text{in}} $ and $ C_{\\text{in}} $ to ground.\n   - It is also connected to the feedback resistor $ R_F $, which connects to the output $ V_{\\text{out}} $.\n\n2. **Feedback Mechanism**:\n   - The circuit appears to be a **transimpedance amplifier (TIA)** with **shunt-shunt feedback**, where the input current is converted to a voltage output.\n   - In such configurations, the **input impedance** is significantly reduced due to feedback.\n\n3. **Small-Signal Model**:\n   - The input current $ i_{\\text{in}} $ splits into three paths:\n     - Through $ R_{\\text{in}} $: $ \\frac{v_p}{R_{\\text{in}}} $\n     - Through $ C_{\\text{in}} $: $ j\\omega C_{\\text{in}} v_p $\n     - Through $ R_F $: $ \\frac{v_p - v_{\\text{out}}}{R_F} $\n\n4. **Feedback Gain**:\n   - The open-loop gain from the input node to the output is denoted as $ A $, which in this case is approximately $ g_m R_{D1} $, assuming $ M_1 $ is in saturation and $ R_{D1} $ is the load resistance at the drain.\n\n5. **Closed-Loop Input Impedance**:\n   - In a **shunt-shunt feedback** configuration (TIA), the input impedance is given by:\n     $$\n     Z_{\\text{in}} = \\frac{R_F}{1 + A}\n     $$\n     where $ A $ is the open-loop transimpedance gain.\n\n   - If $ A = g_m R_{D1} $, then:\n     $$\n     Z_{\\text{in, feedback}} = \\frac{R_F}{1 + g_m R_{D1}}\n     $$\n\n6. **Total Input Impedance**:\n   - The total input impedance is the **parallel combination** of:\n     - $ R_{\\text{in}} $\n     - $ \\frac{1}{j\\omega C_{\\text{in}}} $\n     - $ \\frac{R_F}{1 + g_m R_{D1}} $\n\n---\n\n### **Final Expression**\n\nThe input impedance of the circuit is:\n\n$$\n\\boxed{Z_{\\text{in}} = \\left( \\frac{1}{R_{\\text{in}}} + j\\omega C_{\\text{in}} + \\frac{1 + g_m R_{D1}}{R_F} \\right)^{-1}}\n$$\n\nThis expression accounts for:\n- The resistive and capacitive components at the input,\n- The feedback effect through $ R_F $,\n- The transconductance $ g_m $ of transistor $ M_1 $,\n- The load resistance $ R_{D1} $.\n\n---\n\n### **Simplification (If Applicable)**\n\n- If the **loop gain** $ g_m R_{D1} \\gg 1 $, then:\n  $$\n  Z_{\\text{in}} \\approx \\left( \\frac{1}{R_{\\text{in}}} + j\\omega C_{\\text{in}} + \\frac{g_m R_{D1}}{R_F} \\right)^{-1}\n  $$\n- If $ R_{\\text{in}} $ and $ C_{\\text{in}} $ are negligible compared to the feedback term, then:\n  $$\n  Z_{\\text{in}} \\approx \\frac{R_F}{g_m R_{D1}}\n  $$\n\nHowever, since the problem explicitly includes $ R_{\\text{in}} $ and $ C_{\\text{in}} $, the full expression must include all three components.\n\n---\n\n### ✅ **Final Answer**\n\n$$\n\\boxed{Z_{\\text{in}} = \\left( \\frac{1}{R_{\\text{in}}} + j\\omega C_{\\text{in}} + \\frac{1 + g_m R_{D1}}{R_F} \\right)^{-1}}\n$$",
        "format": "markdown",
        "sha256": "f8b90a8642bf6455d250be869e5f5d1dd87437d387b2c09345f129b723727366"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that shunt feedback reduces input impedance, but uses the wrong one-stage gain and omits the output-side resistance in the feedback path. The required result is (RF + RD2)/(1 + A0), with A0 = (1/2)gm1 gm2,3 RD1 RD2; the added Rin and Cin terms are not part of that model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 235,
        "output_tokens": 14909,
        "total_tokens": 15144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 235,
        "output_tokens": 14909,
        "total_tokens": 15144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13933,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the **input impedance** of the circuit shown in the figure, we analyze the small-signal behavior at node $ P $, which is the input node connected to the gate of transistor $ M_1 $. The input current source $ I_{in} $ is applied at this node, with parallel components $ R_{in} $ and $ C_{in} $ to ground, and feedback resistor $ R_F $ connecting the output $ V_{out} $ back to node $ P $.\n\n---\n\n### **Key Observations:**\n\n- The **amplifier** (comprising $ M_1 $, $ M_2 $, $ M_3 $, and resistors $ R_{D1}, R_{D2} $) forms a **differential pair with active load**, resulting in a high open-loop voltage gain.\n- The **feedback network** consists of $ R_F $, which connects the output $ V_{out} $ to the input node $ P $, forming a **shunt-shunt feedback** configuration (current input, voltage output).\n- The **input impedance** is defined as the ratio of the small-signal voltage at node $ P $, $ V_p $, to the input current $ I_{in} $:\n  $$\n  Z_{in} = \\frac{V_p}{I_{in}}\n  $$\n\n---\n\n### **Small-Signal Analysis:**\n\nApply **Kirchhoff's Current Law (KCL)** at node $ P $:\n\n$$\nI_{in} = \\frac{V_p}{R_{in}} + j\\omega C_{in} V_p + \\frac{V_p - V_{out}}{R_F}\n$$\n\nLet $ A $ be the **open-loop voltage gain** from node $ P $ to $ V_{out} $, i.e., $ V_{out} = A V_p $. Substituting into the KCL equation:\n\n$$\nI_{in} = V_p \\left( \\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 - A}{R_F} \\right)\n$$\n\nSolving for the input impedance:\n\n$$\nZ_{in} = \\frac{V_p}{I_{in}} = \\frac{1}{\\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 - A}{R_F}}\n$$\n\nSince the amplifier typically has a **large negative open-loop gain** (i.e., $ A < 0 $), we can write $ A = -|A| $, so:\n\n$$\n1 - A = 1 + |A|\n$$\n\nThus, the expression becomes:\n\n$$\nZ_{in} = \\frac{1}{\\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 + |A|}{R_F}}\n$$\n\n---\n\n### **Simplification for High Gain:**\n\nIn most practical cases, especially in **transimpedance amplifiers (TIAs)**, the **open-loop gain $ |A| $** is very large. Therefore, the term $ \\frac{1 + |A|}{R_F} $ dominates the denominator, and the input impedance simplifies to:\n\n$$\nZ_{in} \\approx \\frac{R_F}{1 + |A|}\n$$\n\nIf $ |A| \\gg 1 $, then:\n\n$$\nZ_{in} \\approx \\frac{R_F}{|A|}\n$$\n\nThis is a standard result for **shunt-shunt feedback amplifiers**: the input impedance is **reduced by the loop gain**.\n\n---\n\n### **Final Expression:**\n\nThe **exact input impedance** of the circuit is:\n\n$$\n\\boxed{Z_{in} = \\frac{1}{\\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 + |A|}{R_F}}}\n$$\n\nWhere:\n- $ R_{in} $: Input resistance of the photodiode or external component,\n- $ C_{in} $: Input capacitance (e.g., photodiode junction capacitance),\n- $ R_F $: Feedback resistor,\n- $ |A| $: Magnitude of the **open-loop voltage gain** of the amplifier (from node $ P $ to $ V_{out} $).\n\n---\n\n### **Approximate Form (for High Gain):**\n\nFor high-gain amplifiers where $ |A| \\gg 1 $, the input impedance becomes:\n\n$$\n\\boxed{Z_{in} \\approx \\frac{R_F}{|A|}}\n$$\n\nThis approximation is widely used in **transimpedance amplifier design**, where the goal is to minimize input impedance to reduce noise and improve bandwidth.\n\n---\n\n### **Conclusion:**\n\nThe input impedance of the circuit is **dominated by the feedback network** and the **open-loop gain** of the amplifier. The exact expression includes the contributions from $ R_{in} $, $ C_{in} $, and the feedback resistor $ R_F $, but in high-gain scenarios, it simplifies to a value inversely proportional to the open-loop gain.\n\n$$\n\\boxed{Z_{in} = \\frac{1}{\\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 + |A|}{R_F}}}\n$$",
        "format": "markdown",
        "sha256": "6549b16f25f1db88662af65240f85612325f2dac985d147737cd279e27a198c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies that shunt feedback lowers the input impedance roughly by the amplifier gain, but it misses the required exact result, (RF + RD2)/(1 + A0), and omits the output-side resistance RD2. It also introduces input resistance and capacitance not specified in the circuit.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 235,
        "output_tokens": 20179,
        "total_tokens": 20414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 235,
        "output_tokens": 20179,
        "total_tokens": 20414,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the **VCO output phase noise** due to the **LDO's thermal noise spectrum $ S_{\\text{th}} $**, follow these steps:\n\n---\n\n### **Key Concepts**\n1. **LDO Thermal Noise**:  \n   The LDO generates **voltage noise** with a spectral density $ S_{\\text{th}} $ (units: $ \\text{V}^2/\\text{Hz} $) at its output $ V_{\\text{out}} $. This noise modulates the **supply voltage** of the VCO.\n\n2. **VCO Supply Sensitivity**:  \n   The VCO’s frequency is sensitive to supply voltage variations. Define:\n   - $ K_s $: **Supply-to-angular-frequency gain** (units: $ \\text{rad}/(\\text{s} \\cdot \\text{V}) $), i.e., how much the VCO’s angular frequency $ \\omega $ changes per volt of supply noise.\n\n3. **Noise Propagation to Phase**:  \n   - **Frequency deviation** due to LDO noise:  \n     $$\n     \\Delta \\omega(t) = K_s \\cdot v_n(t)\n     $$\n     where $ v_n(t) $ is the LDO’s voltage noise.\n   - **Phase deviation** is the integral of frequency deviation:  \n     $$\n     \\phi(t) = \\int \\Delta \\omega(t) \\, dt\n     $$\n     In the frequency domain, this corresponds to a transfer function $ H(s) = \\frac{K_s}{s} $.\n\n---\n\n### **Mathematical Derivation**\n- The **spectral density of frequency noise** from the LDO is:\n  $$\n  S_{\\omega}(f) = K_s^2 \\cdot S_{\\text{th}}(f)\n  $$\n- The **phase noise spectral density** is obtained by integrating frequency noise (i.e., dividing by $ (2\\pi f)^2 $ in the frequency domain):\n  $$\n  S_{\\phi}(f) = \\frac{S_{\\omega}(f)}{(2\\pi f)^2} = \\frac{K_s^2 \\cdot S_{\\text{th}}(f)}{(2\\pi f)^2}\n  $$\n\n---\n\n### **Final Expression**\nThe **VCO output phase noise** due to the LDO’s thermal noise is:\n$$\n\\boxed{L(f) = \\frac{K_s^2 \\cdot S_{\\text{th}}(f)}{(2\\pi f)^2}}\n$$\nwhere:\n- $ L(f) $: Single-sideband phase noise spectral density (units: $ \\text{rad}^2/\\text{Hz} $),\n- $ K_s $: VCO’s **supply-to-angular-frequency gain** (rad/(s·V)),\n- $ S_{\\text{th}}(f) $: LDO’s **thermal noise voltage spectral density** (V²/Hz),\n- $ f $: Offset frequency from the carrier (Hz).\n\n---\n\n### **Interpretation**\n- The phase noise **scales with $ 1/f^2 $**, characteristic of **frequency-modulated noise** (e.g., supply noise affecting the VCO).\n- If $ K_s $ is unknown, it must be measured or derived from the VCO’s design (e.g., via simulation or empirical testing).\n- This formula assumes **no additional filtering** (e.g., from the LDO’s output capacitance or VCO’s supply decoupling). In practice, such effects may reduce $ S_{\\text{th}}(f) $ at high frequencies.\n\n---\n\n### **Summary**\nTo compute the VCO phase noise from the LDO’s thermal noise:\n1. **Identify $ S_{\\text{th}}(f) $** (LDO’s voltage noise spectrum).\n2. **Determine $ K_s $** (VCO’s supply sensitivity).\n3. **Apply the formula**:\n   $$\n   L(f) = \\frac{K_s^2 \\cdot S_{\\text{th}}(f)}{(2\\pi f)^2}\n   $$\n\nThis gives the **contribution of the LDO’s thermal noise to the VCO’s phase noise**.",
        "format": "markdown",
        "sha256": "ed2063a865b0268cde4b77db5cc2b61dc28b9d4f01091286cfb08aa603a29b0c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly models supply noise as frequency noise and integrates it to obtain the expected 1/offset-frequency-squared phase-noise dependence; its angular-frequency sensitivity is equivalent to Kpush up to 2π. It omits the circuit-specific insight that the supply perturbs the varactors, making Kpush closely related to KVCO, and that lowering KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 4408,
        "total_tokens": 6242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 4408,
        "total_tokens": 6242,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the **VCO output phase noise** due to the **LDO's thermal noise spectrum $ S_{\\text{th}} $**, follow these steps:\n\n---\n\n### **Key Concepts**\n1. **LDO Noise Source**:  \n   The LDO generates thermal noise with a **power spectral density (PSD)** $ S_{\\text{th}} $ (in $ \\text{V}^2/\\text{Hz} $) at its output $ V_{\\text{out}} $. This noise appears as a **voltage fluctuation** $ \\delta V_{\\text{out}} $ superimposed on the supply voltage.\n\n2. **VCO Sensitivity to Supply Voltage**:  \n   The VCO's oscillation frequency is **modulated** by the supply voltage noise. Define:\n   - $ K_s $: **Supply-to-frequency gain** of the VCO (in $ \\text{rad/s per V} $), representing how much the VCO's frequency changes per unit of supply voltage variation.\n     - If $ \\delta V_{\\text{out}} $ causes a frequency deviation $ \\delta \\omega = K_s \\cdot \\delta V_{\\text{out}} $, then $ K_s $ quantifies this sensitivity.\n\n3. **Phase Noise Relationship**:  \n   Phase is the **integral of frequency**. In the frequency domain, this integration corresponds to a **$ 1/(j2\\pi f) $** transfer function. Thus:\n   - Frequency noise PSD: $ S_{\\omega} = K_s^2 \\cdot S_{\\text{th}} $\n   - Phase noise PSD: $ S_{\\phi} = \\frac{S_{\\omega}}{(2\\pi f)^2} = \\frac{K_s^2 \\cdot S_{\\text{th}}}{(2\\pi f)^2} $\n\n---\n\n### **Step-by-Step Computation**\n1. **Determine $ K_s $** (VCO's supply-to-frequency gain):  \n   - Measure or derive $ K_s $ from the VCO's design (e.g., via simulation or empirical characterization).  \n   - For example, if a 1 mV change in $ V_{\\text{out}} $ causes a 1 MHz frequency shift, then $ K_s = 2\\pi \\times 10^6 \\, \\text{rad/s per V} $.\n\n2. **Apply the Transfer Function**:  \n   - The LDO's voltage noise $ \\delta V_{\\text{out}} $ (with PSD $ S_{\\text{th}} $) modulates the VCO's frequency as $ \\delta \\omega = K_s \\cdot \\delta V_{\\text{out}} $.  \n   - The resulting **phase noise contribution** from the LDO is:\n     $$\n     S_{\\phi,\\text{LDO}}(f) = \\frac{K_s^2 \\cdot S_{\\text{th}}}{(2\\pi f)^2}\n     $$\n\n3. **Total VCO Phase Noise**:  \n   - The **total phase noise** includes contributions from the LDO and other sources (e.g., VCO intrinsic noise, control voltage noise).  \n   - If the LDO is the dominant noise source, the total phase noise is approximately $ S_{\\phi,\\text{LDO}}(f) $.\n\n---\n\n### **Final Formula**\n$$\n\\boxed{S_{\\phi,\\text{LDO}}(f) = \\frac{K_s^2 \\cdot S_{\\text{th}}}{(2\\pi f)^2}}\n$$\n\n---\n\n### **Key Notes**\n- **Assumption**: The LDO noise directly modulates the VCO's frequency via $ K_s $. This assumes the VCO's frequency depends on its supply voltage (e.g., through varactor bias, current-starved topology, or other mechanisms).\n- **Practical Considerations**:\n  - If the VCO uses **decoupling capacitors** between $ V_{\\text{out}} $ and the VCO's supply, $ K_s $ may be reduced (noise filtering).\n  - In **differential VCOs**, common-mode supply noise might be rejected, reducing $ K_s $.\n  - For **current-controlled VCOs**, $ K_s $ could relate to how supply noise affects the control current.\n\n---\n\n### **Summary**\nTo compute the VCO output phase noise from the LDO's thermal noise:\n1. **Find $ K_s $** (VCO's sensitivity to supply voltage).\n2. **Scale $ S_{\\text{th}} $** by $ K_s^2 $ to get frequency noise.\n3. **Divide by $ (2\\pi f)^2 $** to convert to phase noise.\n\nThis gives the **phase noise contribution** from the LDO at any offset frequency $ f $.",
        "format": "markdown",
        "sha256": "3113c746fbbfd024f8be187e1c91875e1356c3fa33268eb8e4e07d5462d61dc9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly converts supply-noise PSD through supply-to-frequency sensitivity and FM-to-phase integration, giving the required 1/offset-frequency-squared dependence. It omits the circuit-specific insight that supply noise acts directly on the varactors, making the pushing gain closely related to KVCO and reducible by lowering KVCO.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 5931,
        "total_tokens": 7765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 5931,
        "total_tokens": 7765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the **VCO output phase noise** due to the LDO's thermal noise spectrum $ S_{\\text{th}}(f) $, follow this structured approach:\n\n---\n\n### **Key Steps**\n1. **Identify the LDO Noise Source**  \n   The LDO generates thermal noise with a **power spectral density (PSD)** $ S_{\\text{th}}(f) $ (units: $ \\text{V}^2/\\text{Hz} $) at its output $ V_{\\text{out}} $, which directly supplies the VCO.\n\n2. **Determine the VCO’s Sensitivity to Supply Voltage**  \n   The VCO’s oscillation frequency $ \\omega_0 $ depends on the supply voltage $ V_{\\text{DD}} $. Define the **supply-to-frequency gain**:\n   $$\n   K_{\\text{supply}} = \\frac{d\\omega}{dV_{\\text{DD}}} \\quad \\text{(units: rad/s per V)}\n   $$\n   This parameter quantifies how much the VCO’s frequency deviates for a small change in supply voltage. For example:\n   - In a **ring oscillator**, $ K_{\\text{supply}} $ depends on the delay-stage sensitivity to $ V_{\\text{DD}} $.\n   - In an **LC VCO**, $ K_{\\text{supply}} $ may arise from bias current variations affecting the tank resonance.\n\n3. **Relate Supply Noise to Phase Noise**  \n   Phase noise is the **integral of frequency noise** over time. The transfer function from **supply voltage noise** to **phase noise** is:\n   $$\n   H(f) = \\frac{K_{\\text{supply}}}{j 2\\pi f}\n   $$\n   The **magnitude squared** of this transfer function gives the phase noise contribution:\n   $$\n   |H(f)|^2 = \\left( \\frac{K_{\\text{supply}}}{2\\pi f} \\right)^2\n   $$\n\n4. **Compute the Phase Noise Spectrum**  \n   Multiply the LDO’s noise PSD by $ |H(f)|^2 $:\n   $$\n   \\boxed{S_{\\phi}(f) = S_{\\text{th}}(f) \\cdot \\left( \\frac{K_{\\text{supply}}}{2\\pi f} \\right)^2}\n   $$\n   - **Units**: $ S_{\\phi}(f) $ is in $ \\text{rad}^2/\\text{Hz} $ (double-sideband phase noise PSD).\n   - For **single-sideband (SSB) phase noise** (commonly reported in dBc/Hz), divide by 2:\n     $$\n     L(f) = \\frac{S_{\\phi}(f)}{2}\n     $$\n\n---\n\n### **Additional Considerations**\n- **Power Supply Rejection Ratio (PSRR)**:  \n  If the VCO has a PSRR $ H_{\\text{PSRR}}(f) $ (linear, not dB), the effective supply noise at the VCO’s internal nodes is:\n  $$\n  S_{\\text{VCO,supply}}(f) = S_{\\text{th}}(f) \\cdot |H_{\\text{PSRR}}(f)|^2\n  $$\n  Substitute this into the phase noise formula:\n  $$\n  S_{\\phi}(f) = S_{\\text{th}}(f) \\cdot |H_{\\text{PSRR}}(f)|^2 \\cdot \\left( \\frac{K_{\\text{supply}}}{2\\pi f} \\right)^2\n  $$\n  *Note*: If $ H_{\\text{PSRR}}(f) $ is already incorporated into $ K_{\\text{supply}} $ (e.g., $ K_{\\text{supply}} $ accounts for PSRR), the simpler form $ S_{\\phi}(f) = S_{\\text{th}}(f) \\cdot \\left( \\frac{K_{\\text{supply}}}{2\\pi f} \\right)^2 $ suffices.\n\n- **Frequency Dependence**:  \n  - $ S_{\\text{th}}(f) $ for thermal noise is typically **white** (flat) at low frequencies.\n  - The $ 1/f^2 $ term in the phase noise formula dominates at **offset frequencies** $ f $ far from the carrier, leading to the characteristic $ 1/f^2 $ roll-off in phase noise spectra.\n\n---\n\n### **Final Answer**\nThe **VCO output phase noise** due to the LDO’s thermal noise is computed as:\n$$\n\\boxed{S_{\\phi}(f) = S_{\\text{th}}(f) \\cdot \\left( \\frac{K_{\\text{supply}}}{2\\pi f} \\right)^2}\n$$\nwhere:\n- $ S_{\\text{th}}(f) $ = LDO’s thermal noise PSD ($ \\text{V}^2/\\text{Hz} $),\n- $ K_{\\text{supply}} = \\frac{d\\omega}{dV_{\\text{DD}}} $ = VCO’s supply-to-frequency sensitivity (rad/s per V),\n- $ f $ = offset frequency from the carrier (Hz).\n\nFor **single-sideband phase noise** (in dBc/Hz), use:\n$$\nL(f) = 10 \\log_{10} \\left( \\frac{S_{\\phi}(f)}{2} \\right)\n$$",
        "format": "markdown",
        "sha256": "ded344eb0cdb6eecaaab9748b9cbf10d803b5ecb9d88df9d754d98f06a8396b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly converts supply-voltage noise through the VCO’s frequency sensitivity and FM integration, giving the expected 1/f² dependence and SSB relation. It omits the circuit-specific insight that the supply perturbation acts directly on the varactors, making Kpush closely related to KVCO; the extra PSRR discussion is not needed.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 6586,
        "total_tokens": 8420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 6586,
        "total_tokens": 8420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) to the tail node **reduces phase noise** in the cross-coupled LC oscillator. Here's why:\n\n### Key Mechanism:\nIn a differential LC oscillator, the **tail node (P)** is a high-impedance common-mode node. The current source \\( I_{SS} \\) introduces **current noise** at this node. Without \\( C_T \\), this noise is converted to **voltage noise** at P due to the high impedance, which then couples into the differential oscillation and degrades phase noise.\n\n### Effect of \\( C_T \\):\n- \\( C_T \\) **shunts the tail node to ground**, lowering its impedance at high frequencies (since \\( Z_C = \\frac{1}{j\\omega C_T} \\)).\n- This **reduces the voltage noise** at P caused by \\( I_{SS} \\)'s current noise (voltage noise \\( \\propto I_n \\cdot Z_P \\), where \\( Z_P \\) decreases with \\( C_T \\)).\n- Less voltage noise at P means **less upconversion of tail current noise into phase noise** in the oscillator.\n\n### Result:\nThe **phase noise contribution from the tail current source is suppressed**, leading to **improved (lower) phase noise** in the oscillator. This is a standard technique in LC oscillator design to mitigate common-mode noise and enhance phase purity.\n\n**Answer:** Adding \\( C_T \\) to the tail node **reduces phase noise** by lowering the impedance at the tail node, suppressing the upconversion of tail current source noise into phase noise.",
        "format": "markdown",
        "sha256": "d7d9e2ca86696de125d766d7b6188647327166dc2de2a559428ca3e1ccb3b88b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims a monotonic phase-noise improvement from shunting tail-node noise, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2667,
        "output_tokens": 983,
        "total_tokens": 3650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2667,
        "output_tokens": 983,
        "total_tokens": 3650,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 652,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Adding a capacitor \\( C_T \\) at the tail node (the common-source node of \\( M_1 \\) and \\( M_2 \\)) **reduces phase noise** in the cross-coupled LC oscillator. Here's why:\n\n1. **Noise Injection Path**:  \n   The tail current source \\( I_{SS} \\) (and its associated noise) injects high-frequency noise into the oscillator's tank circuit. This noise contributes to phase noise.\n\n2. **Effect of \\( C_T \\)**:  \n   \\( C_T \\) provides a **low-impedance path to ground** at the oscillation frequency and higher frequencies. This shunts high-frequency noise from the tail current source *away* from the tank circuit, preventing it from modulating the oscillation signal.\n\n3. **Phase Noise Reduction**:  \n   By filtering out high-frequency noise at the tail node, \\( C_T \\) suppresses the noise contribution of the current source to the phase noise. This is a common technique in oscillator design to improve phase noise performance.\n\n**Conclusion**: Adding \\( C_T \\) at the tail node **lowers phase noise** by reducing noise injection from the tail current source into the tank circuit.",
        "format": "markdown",
        "sha256": "839f96d156347ca4be0f8b4bdd51fb99e9a9649ae48efedf6922ec26e6600627"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a monotonic phase-noise reduction from tail-node filtering, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2667,
        "output_tokens": 486,
        "total_tokens": 3153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2667,
        "output_tokens": 486,
        "total_tokens": 3153,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 239,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The addition of \\( C_T \\) at the tail node **reduces phase noise** in the differential LC oscillator. Here's why:\n\n### Key Mechanism:\n- The tail current source (\\( I_{SS} \\)) is a significant noise contributor (e.g., thermal and flicker noise). Without \\( C_T \\), high-frequency noise from \\( I_{SS} \\) modulates the tail current, injecting noise into the differential pair and the tank circuit.\n- \\( C_T \\) acts as a **bypass capacitor**, shunting high-frequency noise from the tail node to ground. This filters out noise components from \\( I_{SS} \\) that would otherwise perturb the oscillation.\n\n### Impact on Phase Noise:\n- **Thermal noise**: \\( C_T \\) reduces the impedance at the tail node for frequencies near the oscillation frequency (\\( f_0 \\)), minimizing noise coupling into the tank. This suppresses the \\( 1/f^2 \\) phase noise region (dominated by thermal noise).\n- **Flicker noise**: By stabilizing the tail current and reducing low-frequency noise injection, \\( C_T \\) also mitigates the \\( 1/f^3 \\) phase noise region (dominated by flicker noise from \\( I_{SS} \\)).\n\n### Practical Note:\nThis is a standard technique in oscillator design. A well-chosen \\( C_T \\) (large enough to bypass noise but small enough to avoid affecting the DC bias) effectively \"cleans\" the tail node, improving phase noise performance without disrupting oscillation conditions.\n\n**Answer:** Adding \\( C_T \\) to the tail node **reduces phase noise** by bypassing high-frequency noise from the current source \\( I_{SS} \\), filtering out noise that would otherwise degrade the oscillator's spectral purity.",
        "format": "markdown",
        "sha256": "c1aae490a5689a624b76fa45b4c792374f2c609edd1ee126772b85cea43da97d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims CT monotonically reduces phase noise through tail-node filtering, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2667,
        "output_tokens": 796,
        "total_tokens": 3463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2432,
        "input_tokens": 2667,
        "output_tokens": 796,
        "total_tokens": 3463,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 431,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The oscillation frequency of the circuit is determined by the **LC tank resonance** formed by the inductors (e.g., $ X_1, Y_1 $) and the **parasitic capacitances** (e.g., transistor base-emitter capacitance $ C_{\\pi} $, collector-substrate capacitance $ C_{\\mu} $, and wiring capacitance). In a cross-coupled differential oscillator topology like this, the dominant frequency is governed by the **resonant frequency of the LC network**.\n\n---\n\n### **Key Observations:**\n- The circuit consists of **two cross-coupled differential pairs**, each with inductors at the bases ($ X_1, Y_1 $ for the top pair; $ X_2, Y_2 $ for the bottom pair).\n- The **cross-coupling** provides **positive feedback**, enabling oscillation.\n- The **inductors** ($ X_1, Y_1 $) and **parasitic capacitances** (from transistors and layout) form the **tank circuit**.\n- Since no explicit capacitors are shown, the **effective capacitance** $ C $ is dominated by **transistor parasitics** (e.g., $ C_{\\pi} $, $ C_{\\mu} $).\n\n---\n\n### **Frequency Estimation:**\nFor an ideal **LC tank circuit**, the resonant frequency is:\n\n$$\nf_0 = \\frac{1}{2\\pi \\sqrt{LC}}\n$$\n\nWhere:\n- $ L $: Equivalent inductance of the tank (e.g., $ X_1 $ or $ Y_1 $, assuming they are part of the same tank).\n- $ C $: Equivalent capacitance, including transistor parasitics and layout capacitance.\n\nIn practical RF oscillators (e.g., differential Colpitts or Hartley types), the **effective capacitance** is often approximated as the **input capacitance of the transistor pair** (e.g., $ C_{\\pi} $ for BJTs or $ C_{gs} $ for FETs). If the inductors are identical and symmetrically placed, the frequency simplifies to the standard LC resonance formula.\n\n---\n\n### **Conclusion:**\nGiven the structure and lack of explicit component values, the **oscillation frequency** is estimated using the **LC resonance formula**. Assuming the inductors $ X_1, Y_1 $ form the tank with an effective capacitance $ C $ (from transistor parasitics), the frequency is:\n\n$$\n\\boxed{f_{\\text{osc}} \\approx \\frac{1}{2\\pi \\sqrt{LC}}}\n$$\n\nWhere:\n- $ L $ is the inductance of the tank (e.g., $ X_1 $ or $ Y_1 $),\n- $ C $ is the effective capacitance (e.g., $ C_{\\pi} $ of the transistors).\n\nThis is the **standard estimation** for such cross-coupled LC oscillators in RF design. For precise calculation, exact values of $ L $ and $ C $ (including parasitics) would be required.",
        "format": "markdown",
        "sha256": "a332157d09a97d98c76d89483c4034f7deef5a66d7a2e64ce48e2594979c475a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the LC tank resonance as the baseline, but omits the essential coupling-induced frequency shift (approximately αω₀/(2Q)); its estimate therefore does not capture the oscillation frequency described by the solution.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2055,
        "output_tokens": 2480,
        "total_tokens": 4535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2055,
        "output_tokens": 2480,
        "total_tokens": 4535,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The oscillation frequency of the circuit is determined by the **LC tank circuit** formed by the inductors (e.g., $ X_1 $ and $ Y_1 $) and the inherent capacitance (e.g., transistor base-emitter or collector-base capacitances). In a cross-coupled LC oscillator, the resonant frequency is given by the standard formula for an LC tank:\n\n$$\nf = \\frac{1}{2\\pi \\sqrt{LC}}\n$$\n\nWhere:\n- $ L $ is the effective inductance of the tank (e.g., $ X_1 $ or $ Y_1 $, assuming symmetry),\n- $ C $ is the effective capacitance between the oscillator nodes (e.g., from transistor capacitances).\n\nSince the problem asks for an **estimate** and no specific values are provided, the oscillation frequency is determined by the resonant frequency of the LC tank formed by the inductors and parasitic capacitances.\n\n---\n\n**Answer:**  \nThe oscillation frequency of the circuit is approximately  \n$$\n\\boxed{f \\approx \\frac{1}{2\\pi \\sqrt{LC}}}\n$$  \nwhere $ L $ is the inductance of the tank circuit (e.g., $ X_1 $ or $ Y_1 $) and $ C $ is the effective capacitance between the oscillator nodes.",
        "format": "markdown",
        "sha256": "e3e3838446c3fef2b44a851472caa24a1c50052aea8203d6cb6ee220c8eee50f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly gives the LC tank resonance as a baseline, but omits the coupling-induced frequency shift that is central to the estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2055,
        "output_tokens": 2446,
        "total_tokens": 4501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2055,
        "output_tokens": 2446,
        "total_tokens": 4501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2176,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "high",
        "api_model": "mistralai/mistral-medium-3-5",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit in the diagram is a **transformer-coupled relaxation oscillator**, likely a variant of a **blocking oscillator** or **saturable-core oscillator**. In such circuits, the oscillation frequency is primarily determined by the **saturation characteristics of the transformer core** and the **charging/discharging dynamics** driven by the current sources $ I_{SS} $ and $ I_1 $. \n\n---\n\n### **Key Observations:**\n1. **Transformer Role**: The transformers (X₁/Y₁ and X₂/Y₂) provide **positive feedback** and are central to the oscillation mechanism. Their inductance and core saturation behavior dominate the timing.\n2. **Current Sources**: The current sources $ I_{SS} $ and $ I_1 $ set the rate at which the transformer windings are charged/discharged, influencing the time constants of the circuit.\n3. **No Explicit Capacitors**: While no capacitors are shown, **stray capacitance** (e.g., from transformer windings or diode junctions) is inherent in real-world circuits and plays a critical role in determining the oscillation frequency.\n\n---\n\n### **Frequency Estimation:**\nIn **saturable-core oscillators** (a common class of transformer-based oscillators), the oscillation frequency is approximately given by:\n\n$$\nf \\approx \\frac{V}{2 \\cdot N \\cdot A \\cdot B_s}\n$$\n\nWhere:\n- $ V $ = Supply voltage (assumed typical for such circuits, e.g., 5–12 V),\n- $ N $ = Number of turns in the transformer winding,\n- $ A $ = Cross-sectional area of the transformer core,\n- $ B_s $ = Saturation flux density of the core material (typically ~1–2 T for ferrites).\n\nHowever, without specific values for these parameters, we rely on **typical operational ranges** for such circuits.\n\n---\n\n### **Typical Frequency Range:**\n- **Blocking oscillators** and **saturable-core oscillators** typically operate in the **10 kHz to 1 MHz** range.\n- For **small signal transformers** used in such configurations (e.g., with ferrite cores), a **common operating frequency** is around **100 kHz**.\n\nThis estimate aligns with practical implementations of similar circuits in power electronics and signal generation applications.\n\n---\n\n### **Conclusion:**\nGiven the structure of the circuit and the absence of explicit component values, the most reasonable **estimate** for the oscillation frequency is based on typical behavior of transformer-coupled relaxation oscillators.\n\n$$\n\\boxed{100\\ \\text{kHz}}\n$$",
        "format": "markdown",
        "sha256": "823349d8bee505944896ec460f6a96b7c45ffc5ecf267b2c0f8179252d2610db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the circuit as a saturable-core relaxation oscillator and gives an arbitrary typical frequency. It misses the LC tank resonance and the coupling-induced frequency shift central to the estimate.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2055,
        "output_tokens": 6629,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1920,
        "input_tokens": 2055,
        "output_tokens": 6629,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    }
  ]
}
