{
  "model_key": "muse_wonder_full_10",
  "display_name": "Muse Wonder Full 1.0",
  "provider": "meta",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Muse Wonder Full 1.0 answered the 50 tasks in three rollouts through OpenRouter's chat completions route (meta/muse-wonder) at maximum reasoning effort. Requests set max_tokens to 943,718, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Muse Wonder Full 1.0 on 2026-11-10 ($4.00 input, $0.20 cached input, $20.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 120,
          "incorrect_count": 30,
          "partial_credit_count": 28,
          "zero_count": 2,
          "mean_score_0_to_4": 3.513333333333333,
          "score_percent": 87.83333333333333,
          "score_distribution": {
            "0": 2,
            "1": 11,
            "2": 15,
            "3": 2,
            "4": 120
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 120,
          "incorrect_count": 30,
          "partial_credit_count": 28,
          "zero_count": 2,
          "mean_score_0_to_4": 3.513333333333333,
          "score_percent": 87.83333333333333,
          "score_distribution": {
            "0": 2,
            "1": 11,
            "2": 15,
            "3": 2,
            "4": 120
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 3,
          "zero_count": 1,
          "mean_score_0_to_4": 3.8777777777777778,
          "score_percent": 96.94444444444444,
          "score_distribution": {
            "0": 1,
            "1": 1,
            "2": 2,
            "4": 86
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 86,
          "incorrect_count": 4,
          "partial_credit_count": 3,
          "zero_count": 1,
          "mean_score_0_to_4": 3.8777777777777778,
          "score_percent": 96.94444444444444,
          "score_distribution": {
            "0": 1,
            "1": 1,
            "2": 2,
            "4": 86
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 34,
          "incorrect_count": 26,
          "partial_credit_count": 25,
          "zero_count": 1,
          "mean_score_0_to_4": 2.966666666666667,
          "score_percent": 74.16666666666667,
          "score_distribution": {
            "0": 1,
            "1": 10,
            "2": 13,
            "3": 2,
            "4": 34
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 34,
          "incorrect_count": 26,
          "partial_credit_count": 25,
          "zero_count": 1,
          "mean_score_0_to_4": 2.966666666666667,
          "score_percent": 74.16666666666667,
          "score_distribution": {
            "0": 1,
            "1": 10,
            "2": 13,
            "3": 2,
            "4": 34
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 38,
        "incorrect_count": 12,
        "partial_credit_count": 11,
        "zero_count": 1,
        "mean_score_0_to_4": 3.38,
        "score_percent": 84.5,
        "score_distribution": {
          "0": 1,
          "1": 5,
          "2": 6,
          "4": 38
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 41,
        "incorrect_count": 9,
        "partial_credit_count": 9,
        "zero_count": 0,
        "mean_score_0_to_4": 3.62,
        "score_percent": 90.5,
        "score_distribution": {
          "1": 3,
          "2": 4,
          "3": 2,
          "4": 41
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 41,
        "incorrect_count": 9,
        "partial_credit_count": 8,
        "zero_count": 1,
        "mean_score_0_to_4": 3.54,
        "score_percent": 88.5,
        "score_distribution": {
          "0": 1,
          "1": 3,
          "2": 5,
          "4": 41
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 25980,
        "input_tokens": 280212,
        "output_tokens": 1922536,
        "total_tokens": 2202748
      },
      "known_totals": {
        "cached_input_tokens": 25980,
        "input_tokens": 280212,
        "output_tokens": 1922536,
        "total_tokens": 2202748
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 27,
          "incorrect_count": 3,
          "partial_credit_count": 2,
          "zero_count": 1,
          "mean_score_0_to_4": 3.7,
          "score_percent": 92.5,
          "score_distribution": {
            "0": 1,
            "1": 1,
            "2": 1,
            "4": 27
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 29,
          "incorrect_count": 1,
          "partial_credit_count": 1,
          "zero_count": 0,
          "mean_score_0_to_4": 3.933333333333333,
          "score_percent": 98.33333333333333,
          "score_distribution": {
            "2": 1,
            "4": 29
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 30,
          "incorrect_count": 0,
          "partial_credit_count": 0,
          "zero_count": 0,
          "mean_score_0_to_4": 4.0,
          "score_percent": 100.0,
          "score_distribution": {
            "4": 30
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 9,
          "zero_count": 0,
          "mean_score_0_to_4": 2.9,
          "score_percent": 72.5,
          "score_distribution": {
            "1": 4,
            "2": 5,
            "4": 11
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 12,
          "incorrect_count": 8,
          "partial_credit_count": 8,
          "zero_count": 0,
          "mean_score_0_to_4": 3.15,
          "score_percent": 78.75,
          "score_distribution": {
            "1": 3,
            "2": 3,
            "3": 2,
            "4": 12
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 11,
          "incorrect_count": 9,
          "partial_credit_count": 8,
          "zero_count": 1,
          "mean_score_0_to_4": 2.85,
          "score_percent": 71.25,
          "score_distribution": {
            "0": 1,
            "1": 3,
            "2": 5,
            "4": 11
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The (low frequency) intrinsic gain of a saturated MOSFET is\n\n$$A_{v0}=g_m r_o$$\n\nIn the long-channel square-law model, at a given bias current $I_D$,\n\n$$g_m=\\sqrt{2\\mu C_{ox}\\frac{W}{L} I_D}=\\frac{2I_D}{V_{GS}-V_{th}}$$\n\n$$r_o=\\frac{1}{\\lambda I_D}\\approx \\frac{V_A}{I_D}, \\qquad V_A\\propto L \\;\\; \\text{ i.e. }\\;\\; \\lambda\\propto \\frac{1}{L}$$\n\nso that\n\n$$A_{v0}=g_m r_o \\propto \\frac{L}{V_{ov}}$$\n\nNow let $W\\to 2W$ and $L\\to 2L$, keeping the same $I_D$ (hence the same $V_{ov}$, since $W/L$ is unchanged):\n\n* $\\dfrac{W}{L}$ is unchanged $\\;\\Rightarrow\\; g_m$ is unchanged.\n* $L$ is doubled $\\;\\Rightarrow\\; \\lambda$ is halved $\\;\\Rightarrow\\; r_o$ is doubled.\n\nTherefore\n\n$$A_{v0}' = g_m' r_o' = g_m \\cdot (2r_o) = 2 A_{v0}$$\n\nThe intrinsic gain roughly **doubles**, essentially due to the longer channel reducing channel-length modulation. The penalty is area and capacitance: $C_{gate}\\propto WL$ increases $4\\times$, so $f_T\\approx g_m/(2\\pi C_{gate})$ drops by about $4\\times$ for the same $g_m$.",
        "format": "markdown",
        "sha256": "e09b3a276da3426de6f444130240902db78349d487fd6985dbc5b9b96cc0df97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling both dimensions leaves W/L and gm approximately unchanged at the stated bias, while doubling L approximately doubles ro, so intrinsic gain doubles. The added capacitance observation is secondary and does not undermine the answer.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3272,
        "total_tokens": 3298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 3272,
        "total_tokens": 3298,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2818,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In saturation the (low-frequency) intrinsic gain is\n\n$$A_i = g_m r_o$$\n\n$$g_m = \\sqrt{2\\mu C_{ox}\\frac{W}{L}I_D} = \\frac{2I_D}{V_{ov}}$$\n$$r_o = \\frac{1}{\\lambda I_D}, \\qquad \\lambda \\propto \\frac{1}{L}$$\n\nso that, at a fixed bias current,\n\n$$A_i = g_m r_o \\propto \\sqrt{\\frac{W}{L}}\\cdot L = \\sqrt{WL}$$\n\nDoubling both $W$ and $L$:\n\n* $W/L$ is unchanged, so for the same $I_D$ (or same $V_{ov}$) $g_m$ is unchanged.\n* $\\lambda$ is halved because $L$ is doubled, so $r_o = 1/\\lambda I_D$ doubles due to reduced channel-length modulation.\n\nHence\n\n$$A_i \\;\\text{doubles} \\;\\; (+6\\text{ dB})$$\n\nto first order in a long-channel model.",
        "format": "markdown",
        "sha256": "9a3099577d2441d01fea2769203e6659e342f49cd8740d041b4bb691718ec83b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies intrinsic gain as gm·ro and explains that doubling both W and L leaves W/L, gm, and approximately ID unchanged while halving λ and doubling ro, so intrinsic gain approximately doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2238,
        "total_tokens": 2264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2238,
        "total_tokens": 2264,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic (self) gain is\n\n$$A_{v,int} = g_m r_o$$\n\nIn long-channel saturation, at a fixed $I_D$ (or fixed $V_{ov}$):\n\n$$g_m = \\sqrt{2\\mu C_{ox}\\frac{W}{L} I_D} = \\frac{2I_D}{V_{ov}}$$\n\n$$r_o = \\frac{1}{\\lambda I_D} = \\frac{V_A}{I_D}$$\n\n$g_m$ depends only on the **ratio** $W/L$, but $r_o$ depends on the **absolute** $L$. Channel-length modulation gives $\\lambda \\propto 1/L$, i.e. $V_A \\propto L$, so $r_o \\propto L$.\n\nIf $W \\to 2W$ and $L \\to 2L$:\n\n* $W/L$ unchanged $\\implies g_m$ **unchanged**\n* $L$ doubled $\\implies r_o$ **doubles**\n\nTherefore:\n\n$$g_m r_o \\propto \\sqrt{WL} \\;\\; \\longrightarrow \\;\\; \\text{doubles}$$\n\nThe price is capacitance: $C_{gs} \\propto WL$ increases $4\\times$, so $f_T = g_m/2\\pi C_{gs}$ drops by $\\sim 4\\times$.",
        "format": "markdown",
        "sha256": "8923218998e8b7a1a69dfb9a1ca4d7422a894033c44a3f59138c078e23fa49a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that keeping the overdrive voltage constant leaves gm and ID approximately unchanged, while doubling L doubles ro and intrinsic gain. The additional capacitance and bandwidth observation is secondary and does not detract.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2090,
        "total_tokens": 2116,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 26,
        "output_tokens": 2090,
        "total_tokens": 2116,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct — for the same MOSFET in saturation.\n\nThe (saturation) drain current is\n\n$$ I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2 = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{OV}^2 $$\n\nwhere $V_{OV}=V_{GS}-V_{TH}$ is the overdrive voltage.\n\nTransconductance is\n\n$$ g_m \\equiv \\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_{V_{DS}} = \\mu_n C_{ox}\\frac{W}{L}V_{OV} $$\n\ni.e.\n\n$$ g_m = \\frac{2I_D}{V_{OV}} = \\sqrt{2\\mu_n C_{ox}\\frac{W}{L}I_D}\\;\\propto\\;V_{OV} $$\n\nSo as you raise $V_{GS}$ on a given device, $V_{OV}$ rises, $I_D$ rises as $V_{OV}^2$, and $g_m$ rises linearly with $V_{OV}$.\n\nStudent B is probably thinking of the transconductance *efficiency*, $g_m/I_D = 2/V_{OV}$, which does go down as $V_{OV}$ increases — you get more $g_m$, but at a disproportionately higher current cost.",
        "format": "markdown",
        "sha256": "275fce15d11b89aa60b069c81a893d17050b6124405e2162e2505edb9014df84"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for a fixed-size MOSFET in saturation, increasing overdrive raises current as VOV² and gm linearly with VOV. The distinction about gm/ID is also correct.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2273,
        "total_tokens": 2311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2273,
        "total_tokens": 2311,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct for a given MOSFET.\n\nTransconductance is the slope of the $I_D-V_{GS}$ curve at constant $V_{DS}$:\n\n$$g_m = \\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_{V_{DS}}$$\n\nIn saturation, using the square-law model,\n\n$$I_D = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_{GS}-V_{TH})^2$$\n\nDefine the overdrive voltage $V_{ov}=V_{GS}-V_{TH}$. Then\n\n$$g_m = \\mu_n C_{ox}\\frac{W}{L}V_{ov} = \\frac{2I_D}{V_{ov}}$$\n\nFor a fixed $W/L$, $g_m$ is directly proportional to $V_{ov}$. Intuitively, $I_D$ versus $V_{GS}$ is a parabola, and it gets steeper as you move to higher $V_{GS}$.\n\nStudent B is probably thinking of the formula $g_m = 2I_D/V_{ov}$ and assuming $I_D$ is constant. In that *design* scenario — where you keep $I_D$ fixed and get a larger $V_{ov}$ by using a smaller $W/L$ — $g_m$ does indeed fall. But if you simply raise the overdrive on the same transistor, $I_D$ rises quadratically and $g_m$ goes up.\n\nWhat does decrease with $V_{ov}$ is the transconductance efficiency, $g_m/I_D = 2/V_{ov}$.",
        "format": "markdown",
        "sha256": "7f0ba5be89303d05cb24fc7f4023f3f585ce48dbaf77d0d62f1f6c07a8be8c2b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed transistor size and explains that increasing overdrive raises drain current quadratically, so gm increases. It also correctly describes Student B’s fixed-current design condition.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2342,
        "total_tokens": 2380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1940,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2342,
        "total_tokens": 2380,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1940,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student A is correct — for a given transistor.\n\nIn saturation (square-law model),\n\n$$I_D = \\tfrac{1}{2}\\mu_n C_{ox}\\frac{W}{L}V_{OV}^2 ,\\qquad V_{OV}\\equiv V_{GS}-V_{th}$$\n\nso\n\n$$g_m=\\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_{V_{DS}} = \\mu_n C_{ox}\\frac{W}{L}\\,V_{OV}$$\n\ni.e. $g_m$ increases (linearly) with overdrive.\n\nStudent B is probably thinking of the alternative form $g_m = 2I_D/V_{OV}$ and treating $I_D$ as constant. But when you raise $V_{GS}$ on the same device, $I_D$ isn't constant — it grows as $V_{OV}^2$, so $g_m = 2I_D/V_{OV} \\propto V_{OV}$ still goes up.\n\nWhat *does* go down with overdrive is the transconductance **efficiency**:\n\n$$\\frac{g_m}{I_D}=\\frac{2}{V_{OV}}$$\n\nSo you get more $g_m$ at higher $V_{OV}$, but you pay disproportionately more current for it. (In a short-channel, velocity-saturated device $g_m$ levels off rather than growing linearly, but it doesn't fall in the first-order model.)",
        "format": "markdown",
        "sha256": "ac0b693dfbc5cd58edf62940d6a5a24951fe785c534df96573d550d31c5756a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A for a fixed device size and explains that increasing overdrive raises current as VOV², so gm increases linearly. The fixed-current interpretation and secondary caveat are also appropriate.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2272,
        "total_tokens": 2310,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 38,
        "output_tokens": 2272,
        "total_tokens": 2310,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes - in the incremental sense. The large signal equations and the\nQ-point are different, but linearization about the Q-point gives the\nsame circuit topology.\n\nFor an NMOS in saturation, with currents taken as entering the\ndrain and voltages referred to the source,\n\n$$ i_d = g_m v_{gs}+g_{mb}v_{bs}+g_{ds}v_{ds} $$\n\ni.e. no gate current, and a $g_m v_{gs}$ current source in parallel\nwith $r_o=1/g_{ds}$ between drain and source. \n\nFor a PMOS, write the large signal current in terms of the\npositive quantities in normal operation,\n$I_{SD}$, $V_{SG}$ and $V_{SD}$:\n\n$$ I_{SD}=\\tfrac12 k_p\\bigl(V_{SG}-|V_{Tp}|\\bigr)^2\\bigl(1+\\lambda_p V_{SD}\\bigr) $$\n\nLinearizing at the Q-point,\n\n$$ i_{sd} = g_m v_{sg}+g_{mb}v_{sb}+ \\frac{v_{sd}}{r_o} $$\n\nwith the positive quantities\n\n$$ \ng_m=\\left.\\frac{\\partial I_{SD}}{\\partial V_{SG}}\\right|\n= k_p\\bigl(V_{SG}-|V_{Tp}|\\bigr)=\\sqrt{2k_p I_{SD}},\\qquad\nr_o = \\frac{1}{\\lambda_p I_{SD}},\\qquad\ng_{mb}= \\eta g_m \n$$\n\nexactly as for the NMOS, with $|I_D|$, $|V_{GS}-V_T|$ etc. In\nparticular if signed $i_d,v_{gs},v_{ds}$ - entering the drain -\nare used for both devices, \n$i_d = g_m v_{gs}+g_{mb}v_{bs}+v_{ds}/r_o$ for the PMOS too,\nwith $g_m,r_o>0$.\n\nThe only apparent difference in textbook drawings is convention:\nfor a PMOS the $g_m$ source is often drawn pointing from source\nto drain, the direction of normal current flow, controlled by\n$v_{sg}=-v_{gs}$. That is the same model with voltage and current\nboth sign-reversed.\n\nThe high-frequency extension - $C_{gs}$, $C_{gd}$, $C_{sb}$,\n$C_{db}$ in the same places - is also identical in form. Only\nthe numerical values of $g_m$, $r_o$, $k$, $V_T$, capacitances,\netc., and the dc polarities, differ.",
        "format": "markdown",
        "sha256": "33bfe3a132f4732da71f4185c7a412f3704683398528e2d8464fa0416cb1e8bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model with consistent polarity conventions, and explains the corresponding sign reversal.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 2936,
        "total_tokens": 2963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 2936,
        "total_tokens": 2963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2308,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The small-signal model is a linearization about the\n$Q$-point. The polarities of the $dc$ supplies and currents\ndisappear; only the derivatives at the $Q$-point remain.\n\nFor an NMOS in saturation\n\n$$\nI_D = f(V_{GS},V_{DS}),\\qquad \ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n$$\n\n$$\ng_m=\\left.\\frac{\\partial I_D}{\\partial V_{GS}}\\right|_Q>0,\n\\qquad\nr_o=\\left.\\frac{\\partial V_{DS}}{\\partial I_D}\\right|_Q\n     =\\frac{1}{\\lambda I_D}.\n$$\n\nFor a PMOS use its natural positive quantities, current\nfrom source to drain and $V_{SG},V_{SD}>0$:\n\n$$\nI_{SD}=f(V_{SG},V_{SD}),\\qquad\ni_{sd}=g_m v_{sg}+\\frac{v_{sd}}{r_o}\n$$\n\n$$\ng_m=\\left.\\frac{\\partial I_{SD}}{\\partial V_{SG}}\\right|_Q>0,\n\\qquad\nr_o=\\frac{1}{\\lambda_p |I_D|}.\n$$\n\nIt is the same two equations in form. Hence the same circuit:\nan (almost) open circuit at the gate, and between drain\nand source a dependent current source $g_m v_{sg}$ for PMOS,\n$g_m v_{gs}$ for NMOS, in parallel with $r_o$. With body\neffect add a second dependent source $g_{mb}v_{bs}$, resp.\n$g_{mb}v_{sb}$, between drain and source; with high-frequency\neffects add $C_{gs}$, $C_{gd}$, $C_{sb}$, $C_{db}$ between the\nsame respective terminals.\n\nIn particular do not put an extra minus sign in $g_m$ for\nthe PMOS. Mixing conventions - e.g. using $v_{sg}$ with a\ncurrent source defined in the NMOS direction - is what\nproduces spurious minus signs.\n\nWhat is different is only:\n\n* the numerical values, e.g. \n  $g_m=\\mu_pC_{ox}(W/L)(V_{SG}-|V_{tp}|)\n       =\\sqrt{2\\mu_pC_{ox}(W/L)|I_D|}$,\n  with $\\mu_p<\\mu_n$ and $|V_{tp}|$;\n* where the terminals sit in the circuit: e.g. the PMOS\n  source is commonly at $V_{DD}$, i.e. $ac$ ground, just as\n  the NMOS source is commonly at ground. Drawn in place,\n  the PMOS model simply appears upside down;\n* in an IC the body connection may differ, e.g. PMOS body\n  to its source in its own $n$-well, making $v_{bs}=0$ and\n  the $g_{mb}$ generator vanish - same model, special case.\n\nSo one generic MOSFET small-signal model serves for both\ndevices.",
        "format": "markdown",
        "sha256": "fe5c3e0c76e280e978e87f1ce27aff9588d3d134a94902d4a440b4de8b028e6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model when voltage and current polarities are chosen consistently, as required by the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 3705,
        "total_tokens": 3732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 3705,
        "total_tokens": 3732,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2956,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, in form it is identical. The difference between NMOS and PMOS is absorbed in the definitions of the (positive) bias quantities.\n\nFor an NMOS in saturation, linearized about the $Q$-point,\n\n$$ i_d = g_m v_{gs}+\\frac{v_{ds}}{r_o}, \\qquad \ng_m=\\left.\\frac{\\partial i_D}{\\partial v_{GS}}\\right|_Q>0 $$\n\ni.e. an open circuit at the gate, and a current source $g_m v_{gs}$ in parallel with $r_o$ between drain and source.\n\nFor a PMOS define currents and voltages from the source, which is the positive terminal for a PMOS:\n\n$$ v_{SG}=-v_{GS},\\qquad i_{SD}=-i_D,\\qquad v_{SD}=-v_{DS} $$\n\nThen in saturation\n\n$$ i_{sd} = g_m v_{sg}+\\frac{v_{sd}}{r_o}, \\qquad \ng_m=\\left.\\frac{\\partial i_{SD}}{\\partial v_{SG}}\\right|_Q\n      =\\mu_p C_{ox}\\frac{W}{L}\\bigl(|V_{GS}|-|V_{tp}|\\bigr)>0,\n\\qquad r_o=\\frac{1}{\\lambda_p |I_D|}, $$\n\nexactly the same equations, with $g\\!\\leftrightarrow\\! g$, $s\\!\\leftrightarrow\\! s$, $d\\!\\leftrightarrow\\! d$. The dependent source flows from source to drain, controlled by $v_{sg}$, with $r_o$ in parallel. Adding $C_{gs}, C_{gd}$, and the body-effect generator $g_{mb}v_{sb}$ gives the same high-frequency model as for NMOS.\n\nIn practice, when a PMOS is drawn with its source on top, the model looks flipped vertically, but it is topologically the same. The only real differences are in the DC biasing — source typically to $V_{DD}$ (a.c. ground), $V_{GS},V_{DS},I_D$ negative in NMOS sign convention, $V_{tp}<0$ — and in the numerical values of $g_m$ and $r_o$, e.g. because $\\mu_p<\\mu_n$. For small-signal analysis you can treat a PMOS exactly like an NMOS.",
        "format": "markdown",
        "sha256": "eeda9dc16b1227db8e7dd74f6a0acdb719d3d2206c29af91478c2431f5fc5239"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model, with consistent polarity conventions; this meets the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 3250,
        "total_tokens": 3277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 27,
        "output_tokens": 3250,
        "total_tokens": 3277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2683,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is drawn with the arrow on the source lead pointing\naway from the channel, i.e. it is an $n$-channel device.\nIts body is tied to its source.\n\nFrom the wiring\n\n* gate is tied to drain,\n* source (and body) is tied to ground,\n* the (ideal) gate draws no current.\n\nHence with $V_{X}$ applied to the top node\n\n$$\nV_{GS}=V_{X}-0=V_{X},\\qquad \nV_{DS}=V_{X}-0=V_{X},\\qquad V_{BS}=0\n$$\n\nand\n\n$$\nI_{X}=I_{D}\\qquad (I_{G}=0).\n$$\n\nFor\n\n$$\nV_{X}<V_{TH}\n$$\n\n$V_{GS}<V_{TH}$ and $M_{1}$ is off,\n\n$$\nI_{X}\\approx 0\\qquad V_{X}\\lesssim V_{TH}\n$$\nneglecting sub-threshold current.\n\nFor $V_{X}>V_{TH}$ the device turns on.  Since\n\n$$\nV_{DS}=V_{GS}>V_{GS}-V_{TH}\\qquad (V_{TH}>0)\n$$\n\nthe diode-connected device is always in saturation\nonce it is on; it never enters the triode region.\nHence, in the square-law model,\n\n$$\n\\,I_{X}=I_{D}\n      =\\frac12\\mu_{n}C_{ox}\\frac{W}{L}\\,\n        \\bigl(V_{X}-V_{TH}\\bigr)^{2}\\,\n        \\bigl(1+\\lambda V_{X}\\bigr)\\,,\\qquad V_{X}>V_{TH}\n$$\n\ni.e. with $\\lambda =0$, a pure parabola in $V_{X}-V_{TH}$,\nof increasing slope $g_{m}\\propto V_{X}-V_{TH}$.\n\n```\n      I_X\n       ^\n       |                                  /\n       |                               /\n       |                            _/\n       |                        __/\n       |                    ___/\n       |___________________/________________> V_X\n       0                 V_TH\n       <---  off  ---><-- saturation -->\n                         I_X ~ (V_X-V_TH)^2\n```\n\n$I_{X}=0$ (ideally) up to $V_{TH}$, then rises\nquadratically for $V_{X}>V_{TH}$.",
        "format": "markdown",
        "sha256": "fc3be8e67526f0e65bdb3535eda8f94a5666d97b6493ad7fb9bb90c4944bb521"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, negligible current below threshold, and saturation with a quadratic rise above threshold. The channel-length-modulation term is a valid optional refinement.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1221,
        "output_tokens": 7235,
        "total_tokens": 8456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1221,
        "output_tokens": 7235,
        "total_tokens": 8456,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is an NMOS device with its gate tied to its drain.\nThe source and body are grounded, so with $I_G=0$\n\n$$ I_X=I_D,\\qquad V_{GS}=V_{DS}=V_X,\\qquad V_{BS}=0 $$\n\nFor $V_X<V_{TH}$, $M_1$ is off.\n\nFor $V_X>V_{TH}$,\n\n$$V_{DS}=V_X \\ge V_{GS}-V_{TH}=V_X-V_{TH}$$\n\nso the diode-connected device is always in saturation when it is on. Hence, neglecting channel-length modulation,\n\n$$\nI_X=\n\\begin{cases}\n0, & V_X\\le V_{TH}\\\\[4pt]\n\\dfrac12\\mu_nC_{ox}\\dfrac{W}{L}\\left(V_X-V_{TH}\\right)^2, & V_X\\ge V_{TH}\n\\end{cases}\n$$\n\ni.e. a parabola starting at $V_X=V_{TH}$.\n\n```\n      I_X\n       ^\n       |                              .\n       |                           .\n       |                        .\n       |                     .\n       |                  _.\n       | ________________.\n       +--------------|--------------------> V_X\n       0             V_TH\n         <-- off -->|<-- saturated -->\n```\n\nWith $\\lambda\\ne 0$ multiply the current for $V_X>V_{TH}$ by $(1+\\lambda V_X)$.",
        "format": "markdown",
        "sha256": "b83c489cb372b79a627ffeb249be72cd2d99560e19f34a43c40f78b228dde4c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold and a quadratic rise above threshold, and correctly notes saturation when on. The channel-length-modulation note is also appropriate.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1221,
        "output_tokens": 19734,
        "total_tokens": 20955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1221,
        "output_tokens": 19734,
        "total_tokens": 20955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is an NMOS device. Its source, and body, are\ngrounded, and its gate and its drain are both tied to the\ntest source.\n\n$$V_{GS}=V_X-0=V_X\\qquad V_{DS}=V_X-0=V_X$$\n\nThe (dc) gate current is zero, so\n\n$$I_X=I_D .$$\n\nFor $V_X<V_{TH}$ the device has no channel.\n\n$$V_{GS}<V_{TH}:\\qquad M_1\\;{\\rm off},\\qquad I_X\\approx 0 $$\n\napart from subthreshold leakage.\n\nFor $V_X>V_{TH}$\n\n$$V_{DS}=V_X \\;\\;>\\;\\;V_{GS}-V_{TH}=V_X-V_{TH}$$\n\nso the saturation condition is always satisfied. The\ndiode-connected device never enters the triode region.\nIn saturation, square law,\n\n$$\nI_X=I_D=\\frac12 \\mu_nC_{ox}\\frac{W}{L}\n\\bigl(V_{GS}-V_{TH}\\bigr)^{2}\\bigl(1+\\lambda V_{DS}\\bigr)\n      =\\frac12 \\mu_nC_{ox}\\frac{W}{L}\n\\bigl(V_X-V_{TH}\\bigr)^{2}\\bigl(1+\\lambda V_X\\bigr),\n\\qquad V_X\\ge V_{TH}\n$$\n\ni.e. $I_X$ is zero up to $V_{TH}$ and then rises\nquadratically, with ever increasing slope $g_m$.\n\n```\n I_X\n  ^\n  |                            /\n  |                         _/\n  |                      _/\n  |                   __/\n  |__________________/________________> V_X\n  0                V_TH\n      cutoff       |   saturation\n                   |   I ~ (V_X-V_TH)^2\n```",
        "format": "markdown",
        "sha256": "e6a1df386db7b4c68e582be3b865fe5a355ad272ba84d18e4c722d50e822a4d1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, gives approximately zero current below threshold, and shows a quadratic rise above threshold in saturation. The added channel-length modulation term is allowed.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1221,
        "output_tokens": 7677,
        "total_tokens": 8898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1221,
        "output_tokens": 7677,
        "total_tokens": 8898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is an NMOS device. Its source and body are at\nground and its drain is held at a fixed potential by the\n1 V source\n\n$$V_{D}=1{\\rm \\ V}\\qquad V_{S}=0$$\n\nThe gate draws no current, so\n\n$$I_{X}=I_{D1},\\qquad V_{GS}=V_{X},\\qquad V_{DS}=1{\\rm \\ V}$$\n\n$V_{SB}=0$, so $V_{TH}$ is constant.\n\n* $V_{X}<V_{TH}$ : cutoff\n\n$$I_{X}\\approx 0$$\n\n* $V_{X}>V_{TH}$ but $V_{GS}-V_{TH}<V_{DS}$, i.e.\n\n$$V_{TH}<V_{X}<V_{TH}+1{\\rm \\ V}$$\n\n$M_{1}$ is in saturation, since $V_{DS}=1\\,{\\rm V}$ is fixed,\n\n$$ \nI_{X}= \\frac12\\mu_{n}C_{ox}\\frac{W}{L}\n\\left(V_{X}-V_{TH}\\right)^{2}\\bigl(1+\\lambda V_{DS}\\bigr)\n\\approx \\frac12\\mu_{n}C_{ox}\\frac{W}{L}\n\\left(V_{X}-V_{TH}\\right)^{2}\n$$\n\na parabola in $V_{X}$.\n\n* $V_{GS}-V_{TH}>V_{DS}$, i.e.\n\n$$V_{X}>V_{TH}+1{\\rm \\ V}$$\n\n$M_{1}$ is in the triode region. With $V_{DS}=1\\,{\\rm V}$ fixed,\n\n$$\n\\begin{aligned}\nI_{X}&=\\mu_{n}C_{ox}\\frac{W}{L}\n\\left[(V_{GS}-V_{TH})V_{DS}-\\frac{V_{DS}^{2}}{2}\\right]  \\\\\n&= \\mu_{n}C_{ox}\\frac{W}{L}\n\\left[V_{X}-V_{TH}-\\tfrac12\\right](1{\\rm \\ V})\n\\end{aligned}\n$$\n\ni.e. $I_{X}$ increases linearly with $V_{X}$, with slope\n$\\mu_{n}C_{ox}(W/L)(1{\\rm V})$, the slope of the parabola at\n$V_{X}=V_{TH}+1\\,{\\rm V}$.\n\n```\n Ix\n  ^                                  /  triode\n  |                                 /   linear\n  |                                /\n  |                              _/\n  |                           _-      saturation\n  |                        _-         quadratic\n  |                     _-\n  |____________________- - - - - - - - - - -> Vx\n  0                  VTH   VTH+1 V\n```\n\n$I_X=0$ up to $V_{TH}$, rises quadratically in saturation\nfor $V_{TH}<V_X<V_{TH}+1\\,{\\rm V}$, and rises linearly in\nthe triode region thereafter.",
        "format": "markdown",
        "sha256": "3d65fccffdaea9f5b1cd7ec844fcb11103abc886aeaa4597016f4e740eef727c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation rise up to VTH + 1 V, and roughly linear triode rise beyond it. The extra channel-length-modulation note is appropriately treated as a nonessential refinement.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1399,
        "output_tokens": 5096,
        "total_tokens": 6495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1399,
        "output_tokens": 5096,
        "total_tokens": 6495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is an NMOS device. Its source and body are at\nground and its drain is held by the ideal 1-V source at\n\n$$V_{D}=1\\;{\\rm V},\\qquad V_{S}=0$$\n\nHence, with $I_{G}\\approx 0$,\n\n$$ I_{X}=I_{D},\\qquad V_{GS}=V_{X},\\qquad V_{DS}=1\\;{\\rm V}= {\\rm const} $$\n$$V_{SB}=0\\;\\; \\text{so}\\;\\;V_{TH}={\\rm const}$$\n\n* $V_{X}<V_{TH}$ : cutoff\n\n$$I_{X}\\approx 0$$\napart from subthreshold leakage.\n\n* $V_{X}>V_{TH}$ : the device is on. Saturation requires\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\iff 1\\ge V_{X}-V_{TH}\n \\iff V_{X}\\le V_{TH}+1\\,{\\rm V}$$\n\nFor $V_{TH}\\le V_{X}\\le V_{TH}+1\\,{\\rm V}$, saturation, $\\lambda =0$,\n\n$$ I_{X}= \\frac12\\mu_{n}C_{ox}\\frac{W}{L}\\,\n\\bigl(V_{X}-V_{TH}\\bigr)^{2} $$\n\nquadratic in $V_{X}$. With $\\lambda\\ne0$ this is multiplied by\nthe constant $1+\\lambda(1{\\rm V})$.\n\n* For $V_{X}>V_{TH}+1\\,{\\rm V}$,\n$V_{GS}-V_{TH}>V_{DS}$ and the device is in the triode region:\n\n$$ \n\\begin{aligned}\nI_{X}&=\\mu_{n}C_{ox}\\frac{W}{L}\n\\left[(V_{GS}-V_{TH})V_{DS}-\\frac{V_{DS}^{2}}{2}\\right]  \\\\\n&=\\mu_{n}C_{ox}\\frac{W}{L}\n\\left[V_{X}-V_{TH}-\\tfrac12\\right](1{\\rm V})\n\\end{aligned}\n$$\n\ni.e. linear in $V_{X}$ with slope \n$\\mu_{n}C_{ox}(W/L)V_{DS}$, the slope reached by the parabola\nat $V_{X}=V_{TH}+1\\,{\\rm V}$.  At the transition\n\n$$I_{X}= \\tfrac12\\mu_{n}C_{ox}\\frac{W}{L}(1{\\rm V})^{2} .$$\n\n```\n I_X\n  ^                                    /\n  |                                  /   triode\n  |                                /     linear\n  |                             _-/\n  |                          _-      saturation\n  |                       _-         quadratic\n  |                    _-\n  | __________________-\n  +------------------------------------------> V_X\n                      V_TH     V_TH+1 V\n          cutoff\n```\n\nThus $I_X$ is zero up to $V_{TH}$, rises quadratically in\nsaturation, and rises linearly thereafter.",
        "format": "markdown",
        "sha256": "a59fa66b8eca6b7186bd36e5fba04fa69906e874ba07afb72738aa8583bf22b9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff below threshold, quadratic saturation current up to V_TH + 1 V, and roughly linear triode current beyond that, matching the required sketch and full-credit rule.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1399,
        "output_tokens": 11368,
        "total_tokens": 12767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1399,
        "output_tokens": 11368,
        "total_tokens": 12767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is an NMOS device. Its source and body are at\nground and its drain is held fixed by the 1-V source.\n\n$$V_{S}=0,\\qquad V_{D}=1{\\rm \\;V},\\qquad V_{G}=V_{X}$$\n\nso that\n\n$$V_{GS}=V_{X},\\qquad V_{DS}=1{\\rm \\;V},\\qquad V_{BS}=0 $$\n\nand, the gate drawing no current, $I_{X}$ is the drain current\nof $M_{1}$.  Let $\\beta =\\mu_{n}C_{ox}W/L$, and neglect\nsubthreshold conduction.\n\nFor $V_{X}<V_{TH}$ the device is off:\n\n$$I_{X}\\approx 0\\qquad V_{X}<V_{TH}$$\n\nFor $V_{X}>V_{TH}$ the device is on.  It is in saturation\nas long as\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\iff 1\\ge V_{X}-V_{TH}\n\\iff V_{X}\\le V_{TH}+1{\\rm \\;V}$$\n\nin which case, with $V_{DS}$ fixed,\n\n$$I_{X}= \\frac{\\beta}{2}\\,(V_{X}-V_{TH})^{2}\\,(1+\\lambda V_{DS})\n      =\\frac{\\beta}{2}\\,(V_{X}-V_{TH})^{2}(1+\\lambda),\n\\qquad V_{TH}<V_{X}<V_{TH}+1$$\n\ni.e. a parabola in $V_{X}$.\n\nFor still larger $V_{X}$,\n\n$$V_{DS}<V_{GS}-V_{TH}\\iff V_{X}>V_{TH}+1{\\rm \\;V}$$\n\n$M_{1}$ enters the triode region. With $V_{DS}=1\\,{\\rm V}$ fixed,\n\n$$\\begin{aligned}\nI_{X}&=\\beta\\Big[(V_{GS}-V_{TH})V_{DS}-\\tfrac12V_{DS}^{2}\\Big]  \\\\\n&=\\beta\\Big[(V_{X}-V_{TH})(1)-\\tfrac12\\Big],\n\\qquad V_{X}>V_{TH}+1{\\rm \\;V},\n\\end{aligned}$$\n\ni.e. $I_{X}$ now increases linearly with $V_{X}$, with slope\n$\\beta(1{\\rm V})$. At $V_{X}=V_{TH}+1\\,{\\rm V}$,\n$I_{X}= \\tfrac{\\beta}{2}(1{\\rm V})^{2}$, and the current and its slope\nare continuous.\n\n```\n IX\n  ^                                  /  triode\n  |                                /   IX ~ VX\n  |                              /\n  |                            /\n  |                         _-   <- VX = VTH+1 V\n  |                      _-\n  |                   _-         saturation\n  |                _-            IX ~ (VX-VTH)^2\n  |             _-\n  |____________-________________________> VX\n  0           VTH      VTH+1 V\n```\n\nIn particular $I_X$ does not saturate with $V_X$; increasing\n$V_X$ beyond $V_{TH}+1\\,{\\rm V}$ drives $M_1$ into triode, changing the\nquadratic dependence to a linear one.",
        "format": "markdown",
        "sha256": "76292dbdb44b02f40e65c2e3ce1e10807826aef13560ea75accf4f7959d49507"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the quadratic saturation-region rise from VTH to VTH+1 V and the roughly linear triode-region rise beyond it. The optional channel-length-modulation detail does not change the main sketch.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1399,
        "output_tokens": 7973,
        "total_tokens": 9372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1399,
        "output_tokens": 7973,
        "total_tokens": 9372,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7067,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. Let $V_X$ be the voltage of the upper terminal.\n\n$M_1$ is a PMOS device whose source is the upper terminal and\nwhose gate and drain are both grounded. Hence\n\n$$\nV_{SG}=V_X-0=V_X ,\\qquad V_{SD}=V_X-0=V_X .\n$$\n\nThe gate is not biased at a fixed voltage with respect to the\nsource; it is tied (through ground) to the drain. The device is\ndiode-connected, seen from its source.\n\nFor $V_X>|V_{THP}|$ it is indeed in saturation, since\n$V_{SD}=V_{SG}>V_{SG}-|V_{THP}|$, but its current is\n\n$$\nI_X=\\frac12 \\mu_p C_{ox}\\frac{W}{L}\n\\bigl(V_{SG}-|V_{THP}|\\bigr)^2\\bigl(1+\\lambda_p V_{SD}\\bigr)\n =\\frac12 \\mu_p C_{ox}\\frac{W}{L}\n\\bigl(V_X-|V_{THP}|\\bigr)^2\\bigl(1+\\lambda_p V_X\\bigr),\n$$\n\nand $I_X=0$ for $V_X<|V_{THP}|$. Thus $I_X$ depends strongly,\nquadratically, on the voltage across the device. It is not\napproximately constant as $V_X$ varies.\n\nIn small signal terms the impedance seen at the terminal is the\nlow diode-connected impedance\n\n$$\nr_X=\\left.\\frac{dV_X}{dI_X}\\right|_{Q}\n   =\\frac{1}{g_m+g_{ds}}\\approx\\frac1{g_m}\\ll r_o .\n$$\n\nA MOS current source requires a fixed $V_{SG}$ and the output\ntaken at the drain, giving a high output impedance. Here\nsaturation alone is not sufficient: the connection makes $M_1$\nact as a nonlinear resistor, not as a current source.",
        "format": "markdown",
        "sha256": "9f811f27b682c97d4ab169ed916e6fd2d0af5f0d706cc2b6f444854c9ba117bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a diode-connected PMOS with its source at the upper terminal, concludes it cannot act as a current source, and explains its low small-signal impedance (about 1/gm).",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 527,
        "output_tokens": 14893,
        "total_tokens": 15420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 527,
        "output_tokens": 14893,
        "total_tokens": 15420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14288,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. Let $V_X$ be the voltage at the upper terminal.\n\n$M_1$ is an NMOS device with\n\n$$\nV_G=0,\\qquad V_S=0,\\qquad V_D=V_B=V_X .\n$$\n\nHence for the MOS channel\n\n$$\nV_{GS}=0<V_{TH},\n$$\n\nso $M_1$ is off; there is no saturated MOS drain current that could remain nearly constant as $V_X$ changes. Forward body bias lowers $V_{TH}$ somewhat, but the junction below clamps $V_B$ before the MOS channel can turn on appreciably.\n\nThe important point is the body connection. The body is tied to the drain, not to the grounded source. Thus the $p$-body/$n^+$ source junction is forward biased when $V_X$ reaches roughly a diode drop:\n\n$$\nV_{BS}=V_X-0 \\approx 0.6\\text{--}0.8\\ {\\rm V}.\n$$\n\nEquivalently, the parasitic $n^+$–$p$–$n^+$ transistor—source as emitter, body as base, drain as collector—has its base and collector both tied to $V_X$ and its emitter grounded. It is a diode-connected parasitic NPN.\n\nTherefore the terminal current is essentially diode/BJT current,\n\n$$\nI_X \\approx I_S e^{V_X/V_T},\n$$\n\nwith $V_X$ clamped near $V_{BE}\\approx0.75$ V and with low incremental resistance,\n\n$$\n\\frac{dV_X}{dI_X}\\approx \\frac{V_T}{I_X}\\approx \\frac1{g_m}.\n$$\n\nSo the one-port behaves like a forward diode to ground, not like a high-output-resistance current source. A current source would require a fixed $V_{GS}>V_{TH}$ and operation in saturation so that $I_D$ is set internally and is nearly independent of the terminal voltage.",
        "format": "markdown",
        "sha256": "cfb571813b52285522302b776c0f6601c1651e479a02869ab27b78baca7a6b02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly concludes that the device is not a current source and describes a low incremental resistance, but misidentifies M1 as an NMOS and misreads its connections. The actual device is a diode-connected PMOS; the proposed body-diode/parasitic-BJT explanation does not match the topology.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 527,
        "output_tokens": 24960,
        "total_tokens": 25487,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 527,
        "output_tokens": 24960,
        "total_tokens": 25487,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is a PMOS device. The arrow is on the upper\nterminal, so the upper terminal is the source, tied to its\n$n$-body. The lower terminal is the drain.\n\nBoth the gate and the drain are grounded, i.e. the gate\nis in fact tied to the drain. Let $V_X$ be the voltage of\nthe upper node. Then\n\n$$\nV_{SG}=V_X-V_G=V_X,\\qquad \nV_{SD}=V_X-V_D=V_X\n$$\n\nso that\n\n$$\nV_{SG}=V_{SD}.\n$$\n\nThe device is diode-connected. When it is on,\n$V_X>|V_{THP}|$ and\n\n$$\nI_X=\\frac12\\mu_pC_{ox}\\frac WL\\,\n\\bigl(V_{SG}-|V_{THP}|\\bigr)^{2}\\bigl(1+\\lambda_p V_{SD}\\bigr)\n =\\frac12\\mu_pC_{ox}\\frac WL\\,\n\\bigl(V_X-|V_{THP}|\\bigr)^{2}\\bigl(1+\\lambda_p V_X\\bigr) .\n$$\n\nIn particular it is always in saturation when on, since\n$V_{SD}=V_{SG}>V_{SG}-|V_{THP}|$, but $I_X$ is not\nindependent of the voltage across the device. $V_{SG}$\nitself moves with $V_X$.\n\nIndeed, with gate and drain at ac ground and $V_{BS}=0$,\nthe small-signal resistance looking into the source is\n\n$$\ni_x = g_m v_{sg}+g_{ds}v_{sd}=(g_m+g_{ds})v_x,\n\\qquad \nr_X=\\frac{v_x}{i_x}=\\frac{1}{g_m+g_{ds}}\\approx\\frac1{g_m},\n$$\n\na low impedance, not the high impedance $ \\sim r_o $ of\na current source. A proper current source requires fixed\n$V_{SG}$ with $V_{SD}$ allowed to vary in saturation.\n\nHence the circuit is a MOS diode, a non-linear low-impedance\nload, not a current source.",
        "format": "markdown",
        "sha256": "a5eb6c6a0fe3ca60eebec2cb5cd3767c4ffcc728facd70ab7d8ddfd9d7d5b2dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS and its connections, explains that it is diode-connected and presents a low small-signal resistance of approximately 1/gm, so it cannot act as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 527,
        "output_tokens": 8465,
        "total_tokens": 8992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 527,
        "output_tokens": 8465,
        "total_tokens": 8992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7825,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is a PMOS device. Its source is the upper terminal,\ntied through $R_{S}$ to $V_{DD}$, its drain is the lower terminal,\ntied through $R_{D}$ to ground. The input is applied to the\ngate and the output is taken at the drain.\n\nIt is therefore a common-source stage with resistive load\n$R_{D}$ and with unbypassed source degeneration $R_{S}$.\nThe body is tied to the source, as shown by the arrow, so\n$V_{BS}=0$ and there is no body effect.\n\n### 1. DC bias\n\nLet $I_{D}>0$ denote the current flowing from source to drain.\nThe same current flows in $R_{S}$ and $R_{D}$.\n\n$$\nV_{S}=V_{DD}-I_{D}R_{S},\\qquad \nV_{out,Q}=V_{D}=I_{D}R_{D}\n$$\n\n$$\nV_{SG}=V_{S}-V_{G}=V_{DD}-V_{in,Q}-I_{D}R_{S}\n$$\n$$\nV_{SD}=V_{S}-V_{D}=V_{DD}-I_{D}(R_{S}+R_{D})\n$$\n\nIn saturation, neglecting $\\lambda$ for the bias equation,\n\n$$\nI_{D}= \\frac{\\beta_{p}}{2}\\,\n\\Bigl(V_{SG}-|V_{Tp}|\\Bigr)^{2},\n\\qquad \n\\beta_{p}= \\mu_{p}C_{ox}\\frac{W}{L}\n$$\n\ni.e.\n\n$$\nI_{D}= \\frac{\\beta_{p}}{2}\\,\n\\Bigl(V_{DD}-V_{in,Q}-I_{D}R_{S}-|V_{Tp}|\\Bigr)^{2}.\n$$\n\n$R_{S}$ provides DC negative feedback: an increase in $I_{D}$\nlowers $V_{S}$ and hence $V_{SG}$, opposing the increase. The\nbias point is therefore stabilized.\n\nFor saturation we require\n\n$$\nV_{SD}\\ge V_{SG}-|V_{Tp}|\\equiv V_{OV},\n\\qquad \ng_{m}= \\beta_{p}V_{OV}= \\sqrt{2\\beta_{p}I_{D}},\\qquad \nr_{o}= \\frac{1}{\\lambda_{p}I_{D}} .\n$$\n\nWhen $V_{in}$ is raised toward $V_{DD}$, $V_{SG}$ decreases,\n$M_{1}$ turns off, $I_{D}\\to0$ and $V_{out}\\to0$. When $V_{in}$\nis lowered, $I_{D}$ and $V_{out}$ increase until $M_{1}$ enters\nthe triode region. The stage is inverting.\n\n### 2. Small-signal voltage gain\n\nUse the small-signal model with $g_{m}$ referred to $v_{sg}$.\n$V_{DD}$ and ground are both ac ground. Let $i_{d}$ be the\nsmall-signal source-to-drain current. Then\n\n$$\nv_{out}=i_{d}R_{D},\\qquad v_{s}=-i_{d}R_{S}\n$$\n\nthe minus sign in $v_{s}$ being because an increase in the\ncurrent through $R_{S}$ increases the drop from $V_{DD}$.\n\nAlso\n\n$$\ni_{d}=g_{m}v_{sg}+\\frac{v_{sd}}{r_{o}}\n     =g_{m}(v_{s}-v_{in})+\\frac{v_{s}-v_{out}}{r_{o}} .\n$$\n\nSubstituting $v_{s}$ and $v_{out}$,\n\n$$\ni_{d}= -g_{m}v_{in}\n       -g_{m}R_{S}i_{d}\n       -\\frac{R_{S}+R_{D}}{r_{o}}i_{d},\n$$\n\n$$\ni_{d}= -\\,\\frac{g_{m}}\n{1+g_{m}R_{S}+ \\dfrac{R_{S}+R_{D}}{r_{o}}}\\,v_{in}.\n$$\n\nHence\n\n$$\n\\,A_{v}=\\frac{v_{out}}{v_{in}}\n      =-\\,\\frac{g_{m}R_{D}}\n      {1+g_{m}R_{S}+ \\dfrac{R_{S}+R_{D}}{r_{o}}}\\, \n$$\n\nor equivalently\n\n$$\nA_{v}= -\\,\\frac{g_{m}r_{o}R_{D}}\n{r_{o}+R_{D}+R_{S}\\bigl(1+g_{m}r_{o}\\bigr)} .\n$$\n\nFor $r_{o}\\gg R_{S},R_{D}$,\n\n$$\nA_{v}\\approx -\\frac{g_{m}R_{D}}{1+g_{m}R_{S}}\n          =-\\frac{R_{D}}{R_{S}+1/g_{m}} .\n$$\n\nIf also $g_{m}R_{S}\\gg1$,\n\n$$\nA_{v}\\approx -\\frac{R_{D}}{R_{S}},\n$$\n\nset by a resistor ratio, largely independent of $g_{m}$.\nDegeneration thus reduces gain but improves linearity,\ngain stability and bandwidth. For $R_{S}=0$ this reduces to\nthe familiar $A_{v}=-g_{m}(R_{D}\\parallel r_{o})$.\n\n### 3. Input and output resistance\n\nInput resistance: the gate draws no (low-frequency) current,\n\n$$\nR_{in}= \\frac{v_{in}}{i_{in}} \\approx \\infty .\n$$\n\nOutput resistance: with $v_{in}=0$, the resistance looking\ninto the drain is boosted by source degeneration,\n\n$$\nR_{\\text{drain}} = r_{o}+R_{S}+g_{m}r_{o}R_{S}\n                 = R_{S}+ \\bigl(1+g_{m}R_{S}\\bigr)r_{o}.\n$$\n\nAt the output terminal this is in parallel with $R_{D}$:\n\n$$\n\\,R_{out}=R_{D}\\;\\Big\\|\\;\n\\Bigl[R_{S}+\\bigl(1+g_{m}R_{S}\\bigr)r_{o}\\Bigr]\\approx R_{D}\\,\n$$\n\nin most practical cases, since $R_{D}$ is usually much\nsmaller than the boosted drain resistance.\n\nIn summary: a PMOS inverting common-source amplifier,\nwhose gain magnitude is reduced from $g_{m}R_{D}$ by the\nlocal series feedback factor $1+g_{m}R_{S}$, with essentially\ninfinite input resistance and output resistance approximately\n$R_{D}$.",
        "format": "markdown",
        "sha256": "958074c08ff85181f13fd2560efccef43f01f77602d8c1ba5fc14b95cc0e681e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the required inverting gain, including a valid finite-ro refinement. The body-effect claim is a secondary issue and does not change the essential answer.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1475,
        "output_tokens": 11338,
        "total_tokens": 12813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1475,
        "output_tokens": 11338,
        "total_tokens": 12813,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9763,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is a PMOS device. The terminal with the arrow\nis the source, on top, the other channel terminal is the drain,\nat the bottom. The body is tied to the source.\n\n$$V_{DD}\\to R_{S}\\to S\\;{\\rm of}\\;M_{1}\\;,\\qquad \nD\\;{\\rm of}\\;M_{1}\\to R_{D}\\to {\\rm GND}$$\n\n$V_{in}$ is on the gate, $V_{out}$ is on the drain. It is a\ncommon-source stage, with a resistor $R_{S}$ in the source\nlead - source degeneration - and a resistive load $R_{D}$ in\nthe drain. The body-source junction is shorted, $V_{BS}=0$,\nso there is no body effect.\n\n### 1. D.C. operation\n\nLet $I_{D}$ be the current flowing from source to drain.\nThe same current flows in $R_{S}$ and $R_{D}$.\n\n$$\\begin{aligned}\nV_{S} &= V_{DD}-I_{D}R_{S} \\\\\nV_{out}=V_{D} &= I_{D}R_{D} \\\\\nV_{SG} &= V_{S}-V_{in}=V_{DD}-I_{D}R_{S}-V_{in}\\\\\nV_{SD} &= V_{S}-V_{D}=V_{DD}-I_{D}(R_{S}+R_{D})\n\\end{aligned}$$\n\n$V_{in}$ must supply the d.c. gate bias. $M_{1}$ is off for\n\n$$V_{SG}<|V_{Tp}|\\;\\;\\Longleftrightarrow\\;\\; V_{in}>V_{DD}-|V_{Tp}|$$\n\nin which case $I_{D}=0$ and $V_{out}=0$. \n\nFor $M_{1}$ in saturation, $\\lambda\\approx 0$,\n\n$$ I_{D}=\\frac{\\beta_{p}}{2}\\big(V_{SG}-|V_{Tp}|\\big)^{2},\n\\qquad \\beta_{p}= \\mu_{p}C_{ox}\\frac{W}{L} $$\n\ni.e. with $\\Delta = V_{DD}-V_{in}-|V_{Tp}|$\n\n$$ I_{D}= \\frac{\\beta_{p}}{2}\\big(\\Delta-I_{D}R_{S}\\big)^{2} $$\n\n$$I_{D}= \\frac{\\;\\beta_{p}R_{S}\\Delta+1-\\sqrt{1+2\\beta_{p}R_{S}\\Delta}\\;}\n{\\beta_{p}R_{S}^{2}}\\;\\;{\\rm in\\;saturation}$$\n\nSaturation requires $V_{SD}\\ge V_{SG}-|V_{Tp}|$, i.e.\n\n$$V_{D}\\le V_{G}+|V_{Tp}|\\qquad\\Longleftrightarrow\\qquad \nI_{D}R_{D}\\le V_{in,DC}+|V_{Tp}| .$$\n\nIncreasing $V_{in}$ decreases $V_{SG}$, decreases $I_{D}$ and\nhence decreases $V_{out}=I_{D}R_{D}$: the stage is inverting.\nFor very low $V_{in}$ $M_{1}$ enters triode and $V_{out}$ tends\nto the resistive divider $V_{DD}R_{D}/(R_{S}+R_{D}+r_{on})$.\n\n### 2. Small-signal voltage gain\n\n$V_{DD}$ is a.c. ground. $R_{S}$ is between source and a.c.\nground, $R_{D}$ between drain and ground. With $v_{sg}=v_{s}-v_{in}$,\n\n$$i_{d}=g_{m}v_{sg}+\\frac{v_{s}-v_{out}}{r_{o}},\\qquad \ni_{d}= \\frac{v_{out}}{R_{D}},\\qquad v_{s}=-i_{d}R_{S}$$\n\nwhence\n\n$$\\,A_{v}=\\frac{v_{out}}{v_{in}}\n      =-\\,\\frac{g_{m}R_{D}}\n                {\\,1+g_{m}R_{S}+\\dfrac{R_{S}+R_{D}}{r_{o}}}\\,  $$\n\n$$A_{v}= -\\frac{g_{m}r_{o}R_{D}}{R_{D}+r_{o}+R_{S}+g_{m}r_{o}R_{S}} $$\n\nFor $r_{o}\\gg R_{S},R_{D}$\n\n$$A_{v}\\approx -\\frac{g_{m}R_{D}}{1+g_{m}R_{S}} $$\n\nthe familiar degenerated common-source gain. The effective\ntransconductance is $g_{m}/(1+g_{m}R_{S})$.\n\nIf $g_{m}R_{S}\\gg1$,\n\n$$A_{v}\\approx -\\frac{R_{D}}{R_{S}}$$\n\ni.e. the gain is set by a resistor ratio, much less sensitive\nto $g_{m}$, $V_{T}$ and temperature, and much more linear,\nat the expense of $|A_{v}|$ and of headroom $I_{D}R_{S}$.\n$R_{S}$ is local series-series feedback: a rise in $v_{in}$\ntends to lower $i_{d}$, lowering $v_{s}$ drop and opposing the change in $v_{sg}$.\n\nWith an external load, replace $R_{D}$ by $R_{D}\\parallel R_{L}$.\n\n### 3. Input and output resistance\n\nGate input, at low frequency,\n\n$$R_{in}\\approx \\infty$$\n\napart from $C_{gs},C_{gd}$ at high frequency.\n\nLooking into the drain, source degeneration boosts the\nresistance to \n\n$$R_{out,M}=R_{S}+r_{o}+g_{m}r_{o}R_{S}\n          =r_{o}(1+g_{m}R_{S})+R_{S}$$\n\nso that at the output terminal\n\n$$\\,R_{out}=R_{D}\\;\\Big\\|\\;\\big[\\,r_{o}(1+g_{m}R_{S})+R_{S}\\,\\big]\\,$$\n\nusually $\\approx R_{D}$ if $R_{D}$ is not very large.\n\nIn summary: a PMOS inverting common-source amplifier with\nsource degeneration. Gain is $-g_{m}R_{D}/(1+g_{m}R_{S})$ to\nfirst order, input resistance is very high, output resistance is\nessentially $R_{D}$, and $R_{S}$ trades gain for linearity,\npredictability and bias stability.",
        "format": "markdown",
        "sha256": "0971e348a8da3914224c0ab7b789afd03c060333faa2d0e4cd42053a8cc5441e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the required inverting gain. The body-tie/no-body-effect claim is a secondary issue under the golden full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1475,
        "output_tokens": 7776,
        "total_tokens": 9251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1475,
        "output_tokens": 7776,
        "total_tokens": 9251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is a p-channel device. The terminal with the arrow\nis the source, the body is tied to the source, and the lower\nterminal is the drain. The body-source junction is therefore\nat zero bias in the signal sense.\n\n$$V_{B}=V_{S}\\qquad\\Longrightarrow\\qquad g_{mb}=0$$\n\n$V_{DD}$ is a signal ground. This is a common-source stage\nwith an unbypassed resistance $R_{S}$ in the source, i.e. local\nseries feedback, and a resistive load $R_{D}$ in the drain.\nThe signal is applied to the gate and taken from the drain,\nso the stage is inverting.\n\n### 1. Bias\n\nLet $I_{D}$ be the current flowing from source to drain.\nThe same current flows in $R_{S}$ and $R_{D}$.\n\n$$\\begin{aligned}\nV_{S} &= V_{DD}-I_{D}R_{S} \\\\\nV_{out,Q}=V_{D} &= I_{D}R_{D} \\\\\nV_{SG} &= V_{S}-V_{in,Q}=V_{DD}-I_{D}R_{S}-V_{in,Q}\\\\\nV_{SD} &= V_{S}-V_{D}=V_{DD}-I_{D}(R_{S}+R_{D})\n\\end{aligned}$$\n\nThe device is off for $V_{SG}<|V_{Tp}|$, i.e. for\n$V_{in}\\gtrsim V_{DD}-|V_{Tp}|$, in which case $I_{D}=0$ and\n$V_{out}=0$.\n\nIn saturation, neglecting channel length modulation,\n\n$$ I_{D}= \\frac{\\beta_{p}}{2}\n\\bigl(V_{SG}-|V_{Tp}|\\bigr)^{2},\n\\qquad \n\\beta_{p}= \\mu_{p}C_{ox}\\frac{W}{L} $$\n\ni.e.\n\n$$ I_{D}= \\frac{\\beta_{p}}{2}\n\\Bigl[V_{DD}-V_{in,Q}-|V_{Tp}|-I_{D}R_{S}\\Bigr]^{2} \\tag{1} $$\n\n$R_{S}$ makes (1) implicit in $I_{D}$: an increase in $I_{D}$\nraises the drop in $R_{S}$, lowers $V_{SG}$ and opposes the\nincrease. The $Q$-point is therefore stabilised against\n$V_{Tp}$ and $\\beta_{p}$ variations, at the cost of headroom\n$I_{D}R_{S}$ at the source.\n\nSaturation requires $V_{SD}\\ge V_{SG}-|V_{Tp}|$, i.e.\n\n$$ V_{D}\\le V_{G}+|V_{Tp}|\n\\qquad\\Longleftrightarrow\\qquad\nV_{out}\\le V_{in}+|V_{Tp}| $$\n\nIf $V_{in}$ is made too negative $I_{D}$ and $V_{out}=I_{D}R_{D}$\nrise until this is violated and $M_{1}$ enters the triode\nregion.\n\nAt the $Q$-point\n\n$$g_{m}= \\beta_{p}\\bigl(V_{SG}-|V_{Tp}|\\bigr)=\\sqrt{2\\beta_{p}I_{D}},\n\\qquad \nr_{o}= \\frac{1}{\\lambda_{p} I_{D}} $$\n\n### 2. Small-signal gain\n\nWith $v_{dd}=0$, let $i_{d}$ be the signal source-to-drain\ncurrent, $v_{s}$ the signal source voltage and $v_{out}$ the\nsignal drain voltage. KCL at source and drain gives\n\n$$v_{s}=-i_{d}R_{S}, \\qquad v_{out}=i_{d}R_{D}$$\n\nand for the transistor, with no body effect,\n\n$$i_{d}=g_{m}v_{sg}+\\frac{v_{sd}}{r_{o}}\n      =g_{m}(v_{s}-v_{in})+\\frac{v_{s}-v_{out}}{r_{o}} .$$\n\nSubstituting $v_{s}$ and $v_{out}$,\n\n$$i_{d}= -g_{m}v_{in}\n-\\left[g_{m}R_{S}+\\frac{R_{S}+R_{D}}{r_{o}}\\right]i_{d}$$\n\nso that the effective transconductance from gate to drain is\n\n$$G_{m,eff}\\equiv\\frac{i_{d}}{v_{in}}\n= -\\,\\frac{g_{m}}\n{1+g_{m}R_{S}+(R_{S}+R_{D})/r_{o}}$$\n\nand\n\n$$\\,A_{v}\\equiv\\frac{v_{out}}{v_{in}}\n= -\\,\\frac{g_{m}R_{D}}\n{1+g_{m}R_{S}+(R_{S}+R_{D})/r_{o}}\n= -\\,\\frac{g_{m}r_{o}R_{D}}\n{r_{o}+R_{S}+R_{D}+g_{m}r_{o}R_{S}}\\, \\tag{2}$$\n\nThe minus sign is the usual common-source phase inversion:\n$v_{in}\\uparrow \\Rightarrow V_{SG}\\downarrow \\Rightarrow\nI_{D}\\downarrow \\Rightarrow V_{out}=I_{D}R_{D}\\downarrow$.\n\nFor $r_{o}\\gg R_{S},R_{D}$, (2) reduces to the familiar\ndegenerated form\n\n$$A_{v}\\approx -\\frac{g_{m}R_{D}}{1+g_{m}R_{S}}\n= -\\frac{R_{D}}{R_{S}+1/g_{m}}$$\n\nand for $g_{m}R_{S}\\gg1$,\n\n$$A_{v}\\approx -\\frac{R_{D}}{R_{S}} $$\n\ni.e. the gain is set by a resistor ratio, is largely\nindependent of $g_{m}$, and is much more linear than an\nundegenerated CS stage. Degeneration trades gain for\nlinearity, predictability and bandwidth.\n\nIf an external load $R_{L}$ is present, replace $R_{D}$ by\n$R_{D}\\parallel R_{L}$ in the numerator of (2).\n\n### 3. Input and output resistance\n\nThe gate draws no (low-frequency) current:\n\n$$R_{in}= \\infty$$\n\nin parallel, at high frequency, with $C_{gs}$ and the\nMiller-multiplied $C_{gd}$. Because $|A_{v}|$ is reduced\nby degeneration, the Miller effect is also reduced.\n\nThe resistance looking into the drain of a source-degenerated\ndevice is raised by the feedback:\n\n$$R_{drain}= r_{o}+R_{S}+g_{m}r_{o}R_{S}\n= R_{S}+ \\bigl(1+g_{m}R_{S}\\bigr)r_{o}$$\n\nHence at the output node\n\n$$\\,R_{out}= R_{D}\\,\\Big\\|\\,\n\\Bigl[R_{S}+ \\bigl(1+g_{m}R_{S}\\bigr)r_{o}\\Bigr]\\,$$\n\nusually $R_{out}\\approx R_{D}$ since the bracketed term is\n$\\gg R_{D}$.\n\nIn summary: a PMOS common-source amplifier with source\ndegeneration $R_{S}$ and drain load $R_{D}$, no body effect,\ngain $\\approx -R_{D}/(R_{S}+1/g_{m})$, infinite input resistance,\nand output resistance essentially $R_{D}$.",
        "format": "markdown",
        "sha256": "baa0f21724cb824eec6b3e7fe10659c52a80ef9e07d20b85fcd73d47db420876"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the PMOS common-source stage with source degeneration and gives the correct inverting gain, including an equivalent finite-r_o refinement. The body-tied-to-source claim is a secondary body-effect error under the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1475,
        "output_tokens": 6460,
        "total_tokens": 7935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1475,
        "output_tokens": 6460,
        "total_tokens": 7935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4703,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The drain is tied to $V_{DD}$, i.e. to ac ground.\nThe output is taken at the source. This is the common\ndrain, or source follower, the MOS analogue of the emitter\nfollower. In the symbol the bulk is tied to the source,\nso there is no body effect, $V_{th}=$ const.\n\nLet\n$$\n\\beta =\\mu_{n}C_{ox}\\frac{W}{L}\\qquad \nI_{D}= \\frac{\\beta}{2}\\,(V_{GS}-V_{th})^{2}(1+\\lambda V_{DS})\n$$\nin saturation.\n\n### 1.  Large signal - d-c transfer\n\nGate current is zero, so the drain current flows in $R_{S}$ :\n\n$$\nV_{out}=I_{D}R_{S},\\qquad \nV_{in}=V_{GS}+V_{out}\n$$\n\n$$\n\\,I_{D}= \\frac{\\beta}{2}\\big(V_{in}-V_{out}-V_{th}\\big)^{2}\\,\\qquad \nV_{out}=I_{D}R_{S} \\tag{1}\n$$\nneglecting $\\lambda$.  The output follows the input,\nshifted down by one $V_{GS}$,\n$$\nV_{out}\\approx V_{in}-V_{GS},\\qquad \nV_{GS}=V_{th}+V_{ov}\n$$\n$V_{ov}=V_{GS}-V_{th}$ being the overdrive at the bias\ncurrent.  From (1), with $V_{ov}=V_{in}-V_{th}-V_{out}$,\n\n$$\n\\frac{\\beta R_{S}}{2}V_{ov}^{2}+V_{ov}-(V_{in}-V_{th})=0\n$$\n$$\nV_{ov}= \\frac{-1+\\sqrt{\\,1+2\\beta R_{S}(V_{in}-V_{th})\\,}}{\\beta R_{S}} ,\n\\qquad V_{in}>V_{th} .\n$$\nFor $V_{in}\\lesssim V_{th}$, $M_{1}$ is off and $V_{out}\\approx 0$.\n\nSaturation requires $V_{DS}\\ge V_{GS}-V_{th}$,\n$$\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{th}\n\\iff V_{in}\\le V_{DD}+V_{th},\n$$\nwhich is essentially always satisfied for $V_{in}\\le V_{DD}$.\nThe follower can therefore swing until $M_{1}$ cuts off\nat the bottom, and until $V_{out}\\approx V_{DD}-V_{GS}$ at the\ntop. It cannot reach $V_{DD}$.\n\nAt the $Q$ point\n$$\ng_{m}= \\beta V_{ov}= \\sqrt{2\\beta I_{D}}=\\frac{2I_{D}}{V_{ov}},\\qquad\nr_{o}= \\frac{1}{\\lambda I_{D}} .\n$$\n\n### 2.  Small signal gain\n\nDrain is ac ground. With $v_{gs}=v_{in}-v_{out}$, KCL at\nthe output node gives\n$$\ng_{m}v_{gs}= \\frac{v_{out}}{R_{S}\\parallel r_{o}}\n$$\ni.e.\n$$\nA_{v}\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{g_{m}\\,(R_{S}\\parallel r_{o})}\n             {1+g_{m}\\,(R_{S}\\parallel r_{o})}\n      =\\frac{R_{S}\\parallel r_{o}}{1/g_{m}+R_{S}\\parallel r_{o}} \\;<\\;1 \\tag{2}\n$$\nFor $\\lambda\\to0$, $A_{v}=g_{m}R_{S}/(1+g_{m}R_{S})$.\nIf $g_{m}R_{S}\\gg 1$, $A_{v}\\approx 1$ - a voltage buffer.\nAn external load $R_{L}$ replaces $R_{S}$ by $R_{S}\\parallel R_{L}$.\nBecause $g_{m}\\propto\\sqrt{I_{D}}$ varies with signal,\n$A_{v}$ is weakly signal dependent: this is the main\nsource of distortion.  It is $100\\%$ series voltage\nfeedback, i.e. source degeneration.\n\nIf the bulk cannot be tied to the source, replace\n$g_{m}$ by $g_{m}+g_{mb}$ in (2) and below.\n\n### 3.  Resistances\n\nInput resistance, at low frequency,\n$$\nR_{in}= \\infty\n$$\nthe gate draws no current. The input source supplies\nonly gate capacitance current; the load current is\nsupplied from $V_{DD}$ through $M_{1}$.\n\nResistance looking into the source, drain ac grounded, is\n$1/g_{m}\\parallel r_{o}$. Hence\n$$\n\\,R_{out}= R_{S}\\;\\Big\\|\\;r_{o}\\;\\Big\\|\\;\\frac{1}{g_{m}}\\;\\approx\\;\\frac{1}{g_{m}}\\quad\n(g_{m}R_{S}\\gg1)\\,  \\tag{3}\n$$\nlow, typically a few hundred ohms. E.g. $g_{m}=5\\,{\\rm mS}$,\n$R_{S}=2\\,{\\rm k\\Omega}$ gives $A_{v}\\approx0.91$ and\n$R_{out}\\approx 180\\;\\Omega$.\n\nAt high frequency $C_{gd}$ goes to ac ground and $C_{gs}$\nappears at the input multiplied by $(1-A_{v})\\ll1$, so\nMiller multiplication is negligible and the bandwidth\nis wide.\n\nIn short: high $R_{in}$, low $R_{out}$, $A_{v}\\lesssim1$,\n$V_{out}\\approx V_{in}-V_{GS}$. It is used as a voltage\nbuffer, impedance transformer and d-c level shifter.",
        "format": "markdown",
        "sha256": "7e41e081537f50382175e2a3992242ba4261a5f063de3a79370814a5ebd3ec9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives the positive, sub-unity gain, including the golden expression when ro is neglected. The additional output-resistance and body-effect discussion is consistent with the analysis.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 8204,
        "total_tokens": 9462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 8204,
        "total_tokens": 9462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is connected as a common-drain stage,\nor source follower. $M_{1}$ is NMOS, its drain is at\na.c. ground, the signal is applied to the gate and taken\nfrom the source. As drawn the bulk is joined to the\nsource, $V_{BS}=0$.\n\nLet $\\beta =\\mu _{n}C_{ox}W/L$, $V_{GS}=V_{in}-V_{out}$.\n\n### 1. Large signal behaviour\n\nThe gate draws no current, so the whole drain current\nflows in $R_{S}$\n\n$$\nI_{D}= \\frac{V_{out}}{R_{S}},\\qquad \nV_{GS}=V_{in}-V_{out},\\qquad \nV_{DS}=V_{DD}-V_{out}\n$$\n\nFor $V_{in}<V_{TH}$, $M_{1}$ is off, $I_{D}=0$, $V_{out}=0$.\n\nFor $V_{in}>V_{TH}$, neglecting $\\lambda$ at first,\n\n$$\nI_{D}= \\frac{\\beta}{2}\\left(V_{GS}-V_{TH}\\right)^{2}\n     =\\frac{\\beta}{2}\\left(V_{in}-V_{out}-V_{TH}\\right)^{2}\n     =\\frac{V_{out}}{R_{S}} \\tag{1}\n$$\n\ni.e.\n\n$$\nV_{in}=V_{out}+V_{TH}+\\sqrt{\\frac{2V_{out}}{\\beta R_{S}}}\n$$\n\nThe output ``follows'' the input, shifted down by\n$V_{GS}=V_{TH}+V_{ov}$. Putting $x=V_{GS}-V_{TH}$ in (1),\n\n$$\n\\frac{\\beta R_{S}}{2}x^{2}+x-(V_{in}-V_{TH})=0,\n\\qquad\nx=\\frac{-1+\\sqrt{1+2\\beta R_{S}(V_{in}-V_{TH})}}{\\beta R_{S}}\n$$\n\n$$\nV_{out}=V_{in}-V_{TH}-x,\\qquad I_{DQ}=\\frac{\\beta}{2}x^{2}\n$$\n\nSaturation requires $V_{DS}\\ge V_{GS}-V_{TH}$, i.e.\n\n$$\nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH}\\iff V_{in}\\le V_{DD}+V_{TH}\n$$\n\nso for $0\\le V_{in}\\le V_{DD}$ the device, when on, is\nnormally in saturation. In particular even for\n$V_{in}=V_{DD}$\n\n$$\nV_{out,max}\\approx V_{DD}-V_{TH}-V_{ov}<V_{DD}-V_{TH}\n$$\n\nthe output can never reach $V_{DD}$.\n\n### 2. Small signal voltage gain\n\nAt the $Q$ point\n\n$$\ng_{m}= \\left.\\frac{\\partial I_{D}}{\\partial V_{GS}}\\right|_{Q}\n     =\\beta (V_{GSQ}-V_{TH})=\\sqrt{2\\beta I_{DQ}}=\\frac{2I_{DQ}}{V_{ov}},\n\\qquad \nr_{o}=\\frac{1}{\\lambda I_{DQ}}\n$$\n\nIn the small signal model the drain is ground,\n$v_{gs}=v_{in}-v_{out}$, and the current source $g_{m}v_{gs}$\ndrives $R_{S}\\parallel r_{o}$ at the output node. Hence\n\n$$\ng_{m}(v_{in}-v_{out}) = v_{out}\\left(\\frac1{R_{S}}+\\frac1{r_{o}}\\right)\n$$\n\n$$\n\\,A_{v}=\\frac{v_{out}}{v_{in}}=\n\\frac{g_{m}(R_{S}\\parallel r_{o})}{1+g_{m}(R_{S}\\parallel r_{o})}\\,>0\n$$\n\nWith an external load $R_{L}$, replace $R_{S}$ by\n$R_{S}\\parallel R_{L}$ in the a.c. expression.\nFor $r_{o}\\to\\infty$,\n\n$$\nA_{v}= \\frac{g_{m}R_{S}}{1+g_{m}R_{S}}=\\frac{1}{1+1/g_{m}R_{S}}<1\n$$\n\n$A_{v}\\to 1$ for $g_{m}R_{S}\\gg1$. There is no phase\ninversion. The gain is inherently $<1$, but the stage\nprovides current and power gain.\n\nIf the bulk cannot be tied to the source, but is at\nground, $v_{bs}=-v_{out}$ and body effect appears:\n$g_{m}\\to g_{m}+g_{mb}$ in the denominator,\n\n$$\nA_{v}= \\frac{g_{m}R'}{1+(g_{m}+g_{mb})R'},\\qquad \nR'=R_{S}\\parallel r_{o},\n$$\n\nand $V_{TH}$ itself increases with $V_{out}$, making\nthe transfer more non-linear.\n\n### 3. Input and output resistance\n\nInput: $i_{g}=0$ at low frequency,\n\n$$\nR_{in}= \\infty\n$$\n\nin practice set by the gate bias network. At high\nfrequency $C_{in}\\approx C_{gd}+C_{gs}(1-A_{v})\n\\approx C_{gd}+C_{gs}/g_{m}R_{S}$, i.e. $C_{gs}$ is\nbootstrapped, so the input pole is high.\n\nOutput: set $v_{in}=0$, apply $v_{x}$ at the source.\n$v_{gs}=-v_{x}$ and\n\n$$\ni_{x}= \\frac{v_{x}}{R_{S}}+\\frac{v_{x}}{r_{o}}+g_{m}v_{x}\n$$\n\n$$\n\\,R_{out}= \\frac{v_{x}}{i_{x}}=\nR_{S}\\parallel r_{o}\\parallel\\frac{1}{g_{m}}\\approx \nR_{S}\\parallel\\frac1{g_{m}}\\,\n$$\n\nwith body effect $1/g_{m}\\to1/(g_{m}+g_{mb})$.\nThis, divided down from the gate side by the\nfeedback action of the follower, is low, typically\n$\\sim 1/g_{m}$.\n\n### 4. Remarks\n\n* It is a voltage buffer: $R_{in}\\approx\\infty$,\n  $R_{out}\\approx 1/g_{m}$, $A_{v}\\approx 1$, and a d.c.\n  level shifter by $V_{GS}$.\n* The gain is not exactly constant: $I_{D}=V_{out}/R_{S}$\n  changes with signal, so $g_{m}=\\sqrt{2\\beta I_{D}}$\n  changes with $V_{out}$, causing distortion. A current\n  source load in place of $R_{S}$ improves linearity.\n* Upward swing is supplied actively by $M_{1}$; downward\n  swing and sinking of load current are limited to the\n  current available through $R_{S}$, essentially the\n  quiescent current. The stage is class-A.\n* Design trade-off: $g_{m}R_{S}\\gg1$ is needed for\n  $A_{v}\\approx1$, requiring large $W/L$, large $I_{DQ}$\n  or large $R_{S}$, at the cost of power and headroom\n  $I_{DQ}R_{S}$.",
        "format": "markdown",
        "sha256": "2e2e7ab22f2be6c9353a52d720ae49e0e10deaddf3e71f3006206d4c609b019e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the ideal expression gmRS/(1 + gmRS). The additional output-resistance and body-effect discussion is consistent with the circuit.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 11510,
        "total_tokens": 12768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 11510,
        "total_tokens": 12768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The top terminal is the drain, the bottom\nterminal is the source. The arrow is the body to\nsource arrow of an $n$--channel device, the body\nbeing tied to the source. The drain is at a-c ground.\nIt is the MOSFET emitter follower: a common drain\nstage, input at the gate, output at the source.\n\n$$ V_{out}=I_{D}R_{S}\\qquad V_{GS}=V_{in}-V_{out} $$\n\n### Large signal\n\nNeglecting $\\lambda$ for bias,\n\n$$\nI_D=\\frac12 \\mu_nC_{ox}\\frac WL\\,\n\\bigl(V_{GS}-V_{TH}\\bigr)^{2}\n     =\\frac12 k_n\\bigl(V_{in}-V_{out}-V_{TH}\\bigr)^{2},\n\\qquad V_{out}=I_DR_S\n$$\n\ni.e. with $k_n=\\mu_nC_{ox}W/L$\n\n$$ I_D=\\frac{k_n}{2}\\Bigl(V_{in}-V_{TH}-I_DR_S\\Bigr)^{2} .$$\n\nFor $V_{in}-V_{out}<V_{TH}$ the device is off and\n$V_{out}\\approx 0$.  In conduction $V_{out}$ follows\n$V_{in}$ shifted down by $V_{GS}$,\n\n$$ V_{out}\\approx V_{in}-V_{TH}-V_{ov},\n\\qquad \nV_{ov}=V_{GS}-V_{TH}=\\frac{g_m}{k_n}=\\sqrt{\\frac{2I_D}{k_n}} . $$\n\nIt is a d-c level shift of roughly one $V_{GS}$.\nSaturation requires\n\n$$V_{DS}\\ge V_{GS}-V_{TH}\\iff \nV_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH}\n\\iff V_{in}\\le V_{DD}+V_{TH},$$\n\nnormally satisfied. $V_{GS}$ , hence $g_m$, grows\nwith $I_D$, so the large signal transfer is only\napproximately linear. Since the body is tied to the\nsource as drawn, $V_{BS}=0$ and there is, ideally, no\nbody effect and no $V_{TH}$ modulation by $V_{out}$.\n\n### Small signal voltage gain\n\nDrain is a-c ground, $v_{gs}=v_{in}-v_{out}$.\nKCL at the output node, current $g_mv_{gs}$ in\nparallel with $r_o$ feeding $R_S$,\n\n$$ g_m(v_{in}-v_{out})-\\frac{v_{out}}{r_o}=\\frac{v_{out}}{R_S} $$\n\n$$\n\\,A_v=\\frac{v_{out}}{v_{in}}\n      =\\frac{g_m}{\\,g_m+1/r_o+1/R_S\\,}\n      =\\frac{R_S\\parallel r_o}{\\,1/g_m+R_S\\parallel r_o\\,}\\,\n$$\n\nin particular for $r_o\\gg R_S$\n\n$$\nA_v\\approx \\frac{g_mR_S}{1+g_mR_S}\n      =\\frac{1}{1+1/g_mR_S}<1 .\n$$\n\nIt is non-inverting, close to unity for $g_mR_S\\gg1$,\ntypically $0.8$--$0.95$. With an external load $R_L$,\nreplace $R_S$ by $R_S\\parallel R_L$. This is $100\\%$\nvoltage-series feedback: the whole output is fed back\nin series with the input, which makes the gain\n$\\approx1$, largely independent of the device.\n\n$g_m$ itself, $g_m=k_nV_{ov}= \\sqrt{2k_nI_D}=2I_D/V_{ov}$,\nvaries with $I_D$, i.e. with $V_{out}$, which is the\nmain residual distortion.\n\nIn a common $p$-substrate process in which the NMOS\nbulk must be at ground, $v_{bs}=-v_{out}$ and $g_m$ in\nthe denominators above is replaced by $g_m+g_{mb}$.\n\n### Input and output resistance\n\nLooking into the gate, at low frequency\n\n$$ R_{in}\\approx \\infty $$\n\napart from gate capacitance. $C_{gs}$ is bootstrapped:\n$C_{in}\\approx C_{gd}+(1-A_v)C_{gs}$, small, so the\ninput pole is high.\n\nWith $v_{in}=0$ apply $v_x$ at the output.\n$v_{gs}=-v_x$, and the current drawn from the test\nsource is $(g_m+1/r_o+1/R_S)v_x$, i.e.\n\n$$\n\\,R_{out}= \\frac1{g_m+1/r_o+1/R_S}\n        =R_S\\parallel r_o\\parallel\\frac1{g_m}\\approx\\frac1{g_m}\\parallel R_S\\,  .\n$$\n\nLow output resistance, of order $1/g_m$, is obtained\nwhile the input resistance stays essentially infinite:\nit is a voltage buffer and impedance transformer, the\nMOSFET analogue of the emitter follower.\n\nThe output pole is $\\approx 1/R_{out}C_L$, normally\nhigh. Limitations are the $V_{GS}$ drop, loss of headroom\n$I_DR_S$ across $R_S$, limited positive swing\n$V_{out,max}\\approx V_{DD}-V_{GS}$ for\n$V_{in,max}\\approx V_{DD}$, and pull-down on negative\nswings only through $R_S$, $ \\tau\\approx R_SC_L$, the\ndevice turning off. Replacing $R_S$ by a current source\nraises $R_S\\!\\to\\! r_{o,cs}$, making $A_v$ still closer to\n1 and improving swing and linearity.",
        "format": "markdown",
        "sha256": "055e61754b946e171be97251cb3cab5ff4b21f96167b95e912e8794a2736c95d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the required approximation gmRS/(1+gmRS). The additional output-resistance and body-effect discussion is supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 8651,
        "total_tokens": 9909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 8651,
        "total_tokens": 9909,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7228,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 is drawn with the gate on the right.\nThe top of the channel is joined to $V_{out}$, the bottom\nof the channel is joined to $V_{in}$, and the arrow is the\nbody to channel arrow. The body is joined to the bottom of\nthe channel.\n\n$$\\;G:V_{DD}\\qquad D:V_{out}\\qquad S,B:V_{in}\\; $$\n\nThe arrow $B\\to $ channel is $p\\to n$, i.e. $M_{1}$ is\n$n$-channel. The gate is at a fixed potential. This is a\ncommon-gate stage with a resistive drain load.\n$V_{DD}$ is an a.c. ground. $V_{BS}=0$ at all times, so\nthere is, by construction, no body effect.\n\n### D.C. bias\n\nLet $V_{IN}$ be the d.c. component of $V_{in}$.\n$$V_{GS}=V_{DD}-V_{IN},\\qquad V_{DS}=V_{out}-V_{IN} $$\n$$ I_{D}= \\frac12 \\mu_{n}C_{ox}\\frac{W}{L}\n        \\bigl(V_{DD}-V_{IN}-V_{th}\\bigr)^{2}\\bigl(1+\\lambda V_{DS}\\bigr) $$\nin saturation, and\n$$ V_{OUT}=V_{DD}-I_{D}R_{D}\\tag{1} $$\nThe input source must sink the d.c. source current $\\approx I_{D}$.\n\nFor conduction $V_{GS}>V_{th}$, i.e. $V_{IN}<V_{DD}-V_{th}$.\nSaturation, $V_{DS}\\ge V_{GS}-V_{th}$, is\n\n$$ V_{OUT}-V_{IN}\\ge V_{DD}-V_{IN}-V_{th}\\quad\\Longleftrightarrow\\quad\n  V_{OUT}\\ge V_{DD}-V_{th}\\quad\\Longleftrightarrow\\quad I_{D}R_{D}\\le V_{th} \\tag{2}$$\n\ni.e. the d.c. (and signal) drop on $R_{D}$ can never exceed\nabout one threshold in saturation. The permissible d.c. input\nlevel is near $V_{DD}$, $V_{OV}=V_{DD}-V_{IN}-V_{th}$ is the\noverdrive, and the undistorted output swing is $<V_{th}$.\nFrom (1), large signal,\n$V_{out}=V_{DD}-\\tfrac12k_{n}R_{D}(V_{DD}-V_{in}-V_{th})^{2}$.\n\n### Small signal gain\n\nWith $v_{g}=0$, $v_{b}=v_{s}=v_{in}$, $v_{bs}=0$,\n$v_{gs}=-v_{in}$, $v_{ds}=v_{out}-v_{in}$.  The small signal\ndrain current, into the drain, is\n\n$$ i_{d}=g_{m}v_{gs}+\\frac{v_{ds}}{r_{o}}\n       =-g_{m}v_{in}+\\frac{v_{out}-v_{in}}{r_{o}} . $$\n\nKCL at the output node, $R_{D}$ going to a.c. ground,\n$-v_{out}/R_{D}=i_{d}$, i.e.\n\n$$ -\\frac{v_{out}}{R_{D}}=-g_{m}v_{in}+\\frac{v_{out}-v_{in}}{r_{o}} $$\n\n$$ \\frac{v_{out}}{v_{in}}=\n   \\frac{\\,g_{m}+1/r_{o}\\,}{\\,1/R_{D}+1/r_{o}\\,}\n   =\\frac{(1+g_{m}r_{o})R_{D}}{R_{D}+r_{o}}\n   \\;\\approx\\; g_{m}\\,(R_{D}\\!\\parallel\\! r_{o})\\quad g_{m}r_{o}\\gg1 \\tag{3} $$\n\nPositive: a common gate stage is non-inverting, essentially\n$g_{m}R_{D}$ for $\\lambda\\to0$. There is no Miller multiplication\nof $C_{gd}$; $C_{gd}$ goes from output to a.c. ground and $C_{gs}$\nfrom input to a.c. ground, so the high frequency performance\nis good.\n\n### Input resistance\n\nThe current drawn from the input source is $-i_{d}$.\nFrom above, with $v_{out}=A_{v}v_{in}$,\n\n$$ R_{in}\\equiv\\frac{v_{in}}{i_{in}}\n      =\\frac{R_{D}+r_{o}}{1+g_{m}r_{o}}\n      \\;\\approx\\;\\frac1{g_{m}}\\qquad r_{o}\\gg R_{D},\\;g_{m}r_{o}\\gg1 \\tag{4} $$\n\nLow input resistance, $\\sim 1/g_{m}$, rising somewhat with\n$R_{D}$ because of $r_{o}$.  A source driving it sees this as\nload; with source resistance $R_{sig}$ the overall gain is\n$A_{v}R_{in}/(R_{in}+R_{sig})$.\n\n### Output resistance\n\nZeroing the (ideal) input source puts the source at a.c.\nground, so resistance looking into the drain is just $r_{o}$:\n\n$$\\;R_{out}=R_{D}\\parallel r_{o}\\;\\approx R_{D}\\tag{5}$$\n\nWith finite $R_{sig}$ at the source the resistance looking\ninto the drain is boosted to $\\approx r_{o}+(1+g_{m}r_{o})R_{sig}$,\nin parallel with $R_{D}$.\n\nIn short: a non-inverting voltage amplifier, $A_{v}\\approx\ng_{m}(R_{D}\\!\\parallel\\! r_{o})$, with very low $R_{in}\\approx1/g_{m}$,\n$R_{out}\\approx R_{D}\\!\\parallel\\! r_{o}$, no body effect,\nno Miller effect, at the price of having to bias the input\nclose to $V_{DD}$ and of the severe headroom limit\n$I_{D}R_{D}\\le V_{th}$ in saturation.",
        "format": "markdown",
        "sha256": "5666a43b10fee9393dff00c2b410bc20c360e3d2ad3487981df0e800caeb0104"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the non-inverting gain and low input resistance, including consistent finite-ro expressions. The additional bias and resistance analysis is largely consistent with the circuit.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 9226,
        "total_tokens": 10384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7694,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 9226,
        "total_tokens": 10384,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7694,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The thick bar on the right is the gate, the bar on the\nleft is the channel. The arrow is the body terminal.\n\n* drain : to $V_{out}$\n* gate : to $V_{DD}$\n* source and body : to $V_{in}$\n\n$M_{1}$ is therefore an NMOS whose gate is at a fixed\npotential and whose signal is applied to the source.\nIt is a common-gate, CG, stage with a resistive drain\nload $R_{D}$. The body is tied to the source, so that\n\n$$V_{BS}\\equiv 0\\qquad\\Longrightarrow\\qquad g_{mb}v_{bs}=0,\n\\qquad V_{T}=V_{T0}={\\rm const}$$\n\ni.e. there is no body effect in the small signal model.\n\n### DC operation\n\n$V_{DD}$ is signal ground. Let $V_{IN}$ be the quiescent\nvalue of $V_{in}$ and $I_{D}$ the quiescent drain current,\nthe same in $R_{D}$ and in $M_{1}$.\n\n$$ V_{GS}=V_{DD}-V_{IN},\\qquad \n   V_{DS}=V_{out}-V_{IN},\\qquad \n   V_{out}=V_{DD}-I_{D}R_{D} $$\n\nIn saturation, with $\\beta=\\mu_{n}C_{ox}W/L$,\n\n$$ I_{D}\\approx \\frac{\\beta}{2}\n      \\big(V_{GS}-V_{T}\\big)^{2}\n      =\\frac{\\beta}{2}V_{OV}^{2},\\qquad \n      V_{OV}\\equiv V_{DD}-V_{IN}-V_{T}>0 $$\n\n$$ V_{out}\\approx V_{DD}-\\frac{\\beta R_{D}}{2}\n     \\big(V_{DD}-V_{T}-V_{IN}\\big)^{2}  $$\n\nThe input source must sink the whole DC current $I_{D}$.\nSaturation requires $V_{DS}\\ge V_{GS}-V_{T}$, i.e.\n\n$$ V_{out}\\ge V_{DD}-V_{T}\\qquad\\Longleftrightarrow\\qquad \nI_{D}R_{D}\\le V_{T}. $$\n\nThis is the price of tying the gate to $V_{DD}$ itself:\nthe allowable DC drop in $R_{D}$, and hence the downward\noutput swing in saturation, is at most about $V_{T}$.\nFor $V_{IN}>V_{DD}-V_{T}$, $M_{1}$ is off and $V_{out}=V_{DD}$;\nfor $V_{IN}$ too low, $I_{D}R_{D}$ grows, $V_{out}$ falls and\n$M_{1}$ enters the triode region and the gain collapses.\n\nAt the $Q$ point\n\n$$ g_{m}= \\beta V_{OV}= \\frac{2I_{D}}{V_{OV}}=\\sqrt{2\\beta I_{D}},\n\\qquad r_{o}= \\frac{1}{\\lambda I_{D}} .$$\n\n### Small signal gain\n\nWith $v_{g}=0$, $v_{s}=v_{in}$, $v_{d}=v_{out}$,\n\n$$v_{gs}=-v_{in},\\qquad v_{bs}=0 .$$\n\nKCL at the output node,\n$\\,v_{out}/R_{D}+g_{m}v_{gs}+(v_{out}-v_{in})/r_{o}=0$, gives\n\n$$ v_{out}\\!\\left(\\frac1{R_{D}}+\\frac1{r_{o}}\\right)\n      =\\left(g_{m}+\\frac1{r_{o}}\\right)v_{in} $$\n\n$$\\;A_{v}\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{g_{m}r_{o}+1}{r_{o}+R_{D}}\\,R_{D}\n      \\;\\approx\\; g_{m}\\,(R_{D}\\parallel r_{o})\\;  $$\n\nfor $g_{m}r_{o}\\gg1$. With a load $R_{L}$, replace\n$R_{D}$ by $R_{D}\\parallel R_{L}$. The gain is positive:\n$v_{in}\\uparrow\\;\\Rightarrow V_{GS}\\downarrow\\;\\Rightarrow\nI_{D}\\downarrow\\;\\Rightarrow$ drop in $R_{D}\\downarrow\\;\n\\Rightarrow v_{out}\\uparrow$. For $\\lambda=0$, $A_{v}=g_{m}R_{D}$.\nIn saturation $A_{v}\\approx 2I_{D}R_{D}/V_{OV}\\lesssim 2V_{T}/V_{OV}$.\n\n### Input and output resistance\n\nThe signal current that the source must supply is\n$i_{in}=v_{out}/R_{D}$, whence\n\n$$\\;R_{in}\\equiv\\frac{v_{in}}{i_{in}}=\\frac{R_{D}}{A_{v}}\n      =\\frac{R_{D}+r_{o}}{1+g_{m}r_{o}}\n      \\approx\\frac1{g_{m}}\\left(1+\\frac{R_{D}}{r_{o}}\\right)\n      \\approx\\frac1{g_{m}}\\; $$\n\nThe CG stage is a low input impedance, essentially\ncurrent-input, stage. As a current buffer $i_{R_{D}}\\approx i_{in}$.\n\nThe resistance at the output is\n\n$$\\;R_{out}=R_{D}\\parallel r_{o}\\approx R_{D}\\;$$\n\nfor an ideal (zero resistance) $V_{in}$ source. With a\nfinite source resistance $R_{S}$ at the source the\nresistance looking into the drain is boosted to\n$r_{o}(1+g_{m}R_{S})+R_{S}$, in parallel with $R_{D}$.\n\nIn the ideal $\\lambda=0$ limit:\n\n| $A_{v}$ | $R_{in}$ | $R_{out}$ |\n|---|---|---|\n| $+g_{m}R_{D}$ | $1/g_{m}$ | $R_{D}$ |\n\n### Remarks\n\nIt is the dual of the common-source stage: comparable\n$|A_{v}|$, but non-inverting, very low $R_{in}$, and no\nMiller multiplication of $C_{gd}$ - $C_{gd}$ goes from\noutput to ac ground and $C_{gs}$ from input to ac ground -\nhence a much wider bandwidth. It is suited to be\ndriven from a low resistance source or as a current\nbuffer / cascode device. Its drawbacks here are the\nbias being completely set by $V_{IN}$, the DC current\ndrawn from the input, the quadratic, hence distorting,\nlarge-signal characteristic $V_{out}(V_{IN})$, and, with\n$V_{G}=V_{DD}$, the severely limited saturated output swing.",
        "format": "markdown",
        "sha256": "e94ca6d7f2b1187f9119a8bc7cf96895c8f19cf7a36a9b1bf11514740f4b2e1e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate stage and gives the positive gain and low input resistance, including the relevant output-resistance correction. The additional bias and operating-region discussion is consistent with the stated connections.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 14062,
        "total_tokens": 15220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 14062,
        "total_tokens": 15220,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is an NMOS device. The electrode on the right,\nwhose lead goes to $V_{DD}$, is the gate. The channel is on\nthe left: drain at the top, source at the bottom. The body\nlead, with the arrow, is shorted to the source lead and goes\nto $V_{in}$.\n\nHence\n\n* drain : $V_{out}$, through $R_{D}$ to $V_{DD}$,\n* source: input, $V_{in}$,\n* gate  : $V_{DD}$, i.e. a fixed dc bias and ac ground,\n* body  : source.\n\nIt is a common-gate stage, input at the source, output at\nthe drain. The in source must sink the dc drain current.\nSince $B\\equiv S$, $v_{bs}\\equiv0$: there is, as drawn, no\nbody effect, $g_{mb}=0$, and $V_{TH}$ is constant.\n\n### Large signal behaviour\n\nPut\n$$\n\\beta =\\mu_{n}C_{ox}\\frac WL ,\\qquad \nV_{GS}=V_{DD}-V_{in},\\qquad V_{DS}=V_{out}-V_{in},\n$$\n$$\nV_{out}=V_{DD}-I_{D}R_{D}.\n$$\n\nCutoff: $V_{GS}\\le V_{TH}$, i.e.\n$$\nV_{in}\\ge V_{DD}-V_{TH}:\\qquad I_{D}\\approx0,\\;\\;V_{out}=V_{DD},\\;\\;A_{v}=0.\n$$\n\nOn: $V_{in}<V_{DD}-V_{TH}$. In saturation, $\\lambda =0$ for brevity,\n$$\nI_{D}=\\frac{\\beta}{2}\\bigl(V_{DD}-V_{in}-V_{TH}\\bigr)^{2},\n\\qquad \nV_{out}=V_{DD}-\\frac{\\beta R_{D}}{2}\n      \\bigl(V_{DD}-V_{in}-V_{TH}\\bigr)^{2}.\n$$\nSaturation requires $V_{DS}\\ge V_{GS}-V_{TH}$, i.e. $V_{D}\\ge V_{G}-V_{TH}$:\n$$\n\\,V_{out}\\ge V_{DD}-V_{TH}\\,\\qquad\\Longleftrightarrow\\qquad \n\\,I_{D}R_{D}\\le V_{TH}\\,  .\n$$\nThis is the important consequence of tying the gate to the\nsupply. A saturated $M_{1}$ can have at most a $V_{TH}$ drop\nacross $R_{D}$, and its dc output must stay within $V_{TH}$ of\n$V_{DD}$. With $V_{ov}=V_{GS}-V_{TH}$,\n$$\nV_{in,dc}=V_{DD}-V_{TH}-V_{ov},\\qquad I_{D0}=\\frac{\\beta}{2}V_{ov}^{2}.\n$$\nSaturation holds only for \n$V_{ov}\\le\\sqrt{2V_{TH}/\\beta R_{D}}$,\ni.e. in a narrow input range just below $V_{DD}-V_{TH}$.\n\nFor smaller $V_{in}$, $I_{D}R_{D}>V_{TH}$ and $M_{1}$ is in the\ntriode region,\n$$\nI_{D}= \\beta\\Bigl[V_{ov}V_{DS}-\\tfrac12V_{DS}^{2}\\Bigr]\n     =\\frac{V_{DD}-V_{in}-V_{DS}}{R_{D}},\\qquad V_{out}=V_{in}+V_{DS},\n$$\nacting essentially as a voltage controlled resistance between\n$V_{in}$ and $V_{out}$ in series with $R_{D}$. In deep triode\n$V_{out}\\to V_{in}^{+}$ and $|A_{v}|\\lesssim1$. For low $V_{in}$\n$V_{GS}$ also becomes impractically large.\n\nIn short, the $V_{out}$-$V_{in}$ characteristic is: $V_{out}\\approx\nV_{in}$ (triode, slope $\\sim1$) at low $V_{in}$, a steep\nnon-inverting saturated portion near $V_{DD}$, and $V_{out}=V_{DD}$\nin cutoff.\n\n### Small signal behaviour in saturation\n\nAc ground the gate. $v_{gs}=-v_{in}$, $v_{bs}=0$. With\n$g_{m}=\\beta V_{ov}=\\sqrt{2\\beta I_{D0}}=2I_{D0}/V_{ov}$ and\n$r_{o}\\approx1/\\lambda I_{D0}$, KCL at the drain, $v_{out}=-i_{d}R_{D}$,\ngives\n$$\n\\,A_{v}\\equiv\\frac{v_{out}}{v_{in}}\n      =(g_{m}+r_{o}^{-1})\\,(R_{D}\\!\\parallel\\! r_{o})\n      =\\frac{(1+g_{m}r_{o})R_{D}}{R_{D}+r_{o}}\n      \\approx g_{m}R_{D}\\,,\\qquad\\text{positive.}\n$$\nThe stage is non-inverting, as a CG stage must be.\nIn saturation $I_{D}R_{D}\\le V_{TH}$, so the saturated gain is\nbounded by\n$$\nA_{v}\\approx g_{m}R_{D}= \\frac{2I_{D}R_{D}}{V_{ov}}\\le\\frac{2V_{TH}}{V_{ov}},\n$$\nonly a few for practical $V_{ov}$.\n\nInput resistance, looking into the source with $R_{D}$ at the drain:\n$$\n\\,R_{in}=\\frac{v_{in}}{i_{in}}=\\frac{R_{D}+r_{o}}{1+g_{m}r_{o}}\n       \\approx\\frac1{g_{m}}\\Bigl(1+\\frac{R_{D}}{r_{o}}\\Bigr)\\approx\\frac1{g_{m}}\\, .\n$$\n$R_{D}$ is to be replaced by $R_{D}\\!\\parallel\\!R_{L}$ if loaded.\n$R_{in}$ can be made e.g. $50\\,\\Omega$ by choice of $g_{m}$; a\nresistive signal source $R_{S}$ is loaded by this low $R_{in}$\nand degenerates the gain.\n\nOutput resistance, for an ideal $v_{in}$ source,\n$$\n\\,R_{out}=R_{D}\\!\\parallel\\! r_{o}\\approx R_{D}\\,.\n$$\nWith source resistance $R_{S}$ the resistance looking into the\ndrain becomes $r_{o}(1+g_{m}R_{S})+R_{S}$, in parallel with $R_{D}$.\n\n$C_{gs}$ is between input and ac ground and $C_{gd}$ between\noutput and ac ground; there is no Miller multiplication. The\ninput pole is high because $R_{in}$ is low, the output pole is\n$\\approx[(R_{D}\\!\\parallel\\!r_{o})(C_{gd}+C_{db}+C_{L})]^{-1}$.\nReverse isolation is good. It is therefore useful as a\ncurrent buffer/cascode and for impedance matching, rather\nthan as a high-gain, large-swing voltage amplifier: tying\n$V_{G}$ to $V_{DD}$ leaves the saturated output swing\n$<V_{TH}$, requires $V_{in,dc}$ close to the positive rail,\nand the input source must carry the full dc $I_{D}$.",
        "format": "markdown",
        "sha256": "01bb87d4e4e9294fd31b608197da70e13547862e23b58cb45ae8be4740f21763"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the expected non-inverting gain and approximately 1/gm input resistance. The additional analysis is consistent with the essential result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 16703,
        "total_tokens": 17861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1158,
        "output_tokens": 16703,
        "total_tokens": 17861,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is biased by the d-c voltage $V_b$ on its gate.\nFor signals $V_b$ and $V_{DD}$ are a-c grounds.  $C_1$ is assumed\nlarge, i.e. a short for the signal frequencies of interest.\nThe signal is applied to the source, the output is taken at the\ndrain, and the bulk is at a-c ground.  This is a common-gate\nstage.  The bulk is not tied to the source, so the body effect\nis active and, for this connection, aids the gate transconductance.\n\nAssume $M_1$ is saturated, with quiescent $g_m$, $g_{mb}$ and $r_o$,\n$\\,g_{mb}=\\eta g_m$.\n\n### Small signal behaviour\n\nWith $v_{in}$ at the source\n\n$$\nv_{gs}=v_g-v_s=-v_{in},\\qquad \nv_{bs}=v_{bulk}-v_s=-v_{in} .\n$$\n\nHence the drain signal current is, apart from the $r_o$ current,\n\n$$\ni_d = g_m v_{gs}+g_{mb}v_{bs}=-(g_m+g_{mb})v_{in},\n$$\n\ni.e. the effective transconductance from source to drain is\n\n$$\nG_m = g_m+g_{mb}=g_m(1+\\eta).\n$$\n\nKCL at the output node, with $i_d$ flowing from drain to source,\n\n$$\n-\\frac{v_{out}}{R_D}= -(g_m+g_{mb})v_{in}+\\frac{v_{out}-v_{in}}{r_o},\n$$\n\nso that\n\n$$\n\\,A_v\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{(g_m+g_{mb})r_o+1}{\\,r_o+R_D\\,}R_D\n      =\\big[\\,g_m+g_{mb}+g_{o}\\big]\\,(R_D\\parallel r_o)\\,\n$$\n\nwith $g_o=1/r_o$.  In the usual case $r_o\\gg R_D$,\n\n$$\nA_v \\approx (g_m+g_{mb})R_D \\approx (g_m+g_{mb})(R_D\\parallel r_o).\n$$\n\nThe gain is positive: the CG stage is non-inverting. Its\nmagnitude is comparable with that of a common-source stage,\n$(g_m+g_{mb})$ replacing $g_m$ because $v_{bs}=-v_{in}$ here.\n\n### Input resistance\n\nThe current drawn from the input source gives, looking into\nthe source with $R_D$ in the drain,\n\n$$\n\\,R_{in}= \\frac{v_{in}}{i_{in}}\n       =\\frac{r_o+R_D}{1+(g_m+g_{mb})r_o}\\,\n$$\n\nin series with $C_1$ at the input.  For $R_D\\ll r_o$ and\n$(g_m+g_{mb})r_o\\gg1$,\n\n$$\nR_{in}\\approx \\frac{1}{g_m+g_{mb}+g_o}\\approx\\frac{1}{g_m+g_{mb}},\n$$\n\na low resistance, $\\sim 1/g_m$.  This is the price, and the\nvirtue, of the CG stage: it is a good current input / impedance\ntransformer and a natural $50\\,\\Omega$ termination.  $C_1$ and\n$R_{in}$ form the low-frequency high-pass,\n$f_L\\approx 1\\big/\\big[\\,2\\pi C_1(R_{in}+R_{sig})\\big]$, so $C_1$\nmust be large because $R_{in}$ is small.\n\n### Output resistance\n\nWith $v_{in}$ shorted for signals, $v_{gs}=v_{bs}=0$ looking\nback into the drain, so the resistance at the output terminal is\n\n$$\n\\,R_{out}=R_D\\parallel r_o\\approx R_D\\, \\qquad (r_o\\gg R_D).\n$$\n\n### Remarks\n\nQuiescently $V_{out,Q}=V_{DD}-I_DR_D$ and saturation requires\n$V_D\\ge V_G-V_{TH}$, i.e. $V_{out}\\ge V_b-V_{TH}$. A positive\n$v_{in}$ reduces $I_D$ and raises $v_{out}$ toward $V_{DD}$; a\nnegative $v_{in}$ does the opposite and can drive $M_1$ into the\ntriode region.\n\nThere is essentially no Miller multiplication of $C_{gd}$,\nthe gate being a-c ground, so the CG stage has excellent\nhigh-frequency behaviour, at the expense of the low\n$R_{in}$ and a voltage gain obtained with a current input. It is\nthe upper device of the cascode for exactly these reasons.",
        "format": "markdown",
        "sha256": "6075559b49df9d469c3aaec457859d718e5b6a10d6fe0890ca8b5dc132ae36ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes a common-gate topology but misses that the source node is directly shorted to ground, so it incorrectly derives a nonzero gain. The golden solution assigns this error score 1.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1898,
        "output_tokens": 20722,
        "total_tokens": 22620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1898,
        "output_tokens": 20722,
        "total_tokens": 22620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19550,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit appears to be a common gate stage, but it\nis not. Let $V_{b}$ and $V_{DD}$ be ac grounds.\n\n$M_{1}$ has\n\n* drain to $V_{out}$ and $R_{D}$,\n* gate to the fixed bias $V_{b}$,\n* source to the node at the right of $C_{1}$.\n\nThat source node is connected by a plain wire to ground.\n\n### DC bias\n\n$$V_{S}=0,\\qquad V_{GS}=V_{b}$$\n\nso, if $V_{b}>V_{TH}$ and $M_{1}$ is saturated,\n\n$$ I_{D}\\approx \\frac12 k_n (V_b-V_{TH})^2(1+\\lambda V_{DS}) $$\n\n$$V_{out,Q}=V_{DD}-I_{D}R_D$$\n\nwith saturation requiring $V_{out,Q}\\ge V_b-V_{TH}$. This is only a dc bias condition. $M_1$ and $R_D$ merely dissipate static power.\n\n### Small signal behaviour\n\nThe right hand plate of $C_{1}$ is not a floating input node:\nit is shorted to ground. Hence, irrespective of $V_{in}$,\n\n$$v_s = 0$$\n\n$V_{in}$ is applied, through $C_{1}$, from ground to ground.\nAll the ac current drawn through $C_{1}$,\n\n$$i_{in}=C_{1}\\frac{dv_{in}}{dt},$$\n\nreturns through the ground lead; none is injected into the source\nof $M_{1}$.\n\nSince the gate is also at ac ground,\n\n$$v_{gs}=v_g-v_s=0,\\qquad v_{bs}=-v_s=0.$$\n\nTherefore the dependent current source in the small signal model\nvanishes:\n\n$$i_d = g_m v_{gs}+g_{mb}v_{bs}+\\frac{v_{ds}}{r_o}\n     = \\frac{v_{out}}{r_o}.$$\n\nKCL at the output node gives\n\n$$\\frac{v_{out}}{R_D}+\\frac{v_{out}}{r_o}=0\n\\qquad\\Longrightarrow\\qquad v_{out}=0.$$\n\nHence\n\n$$\\;A_v=\\frac{v_{out}}{v_{in}}=0\\;$$\n\nat all frequencies in the ideal model. The input impedance seen by\n$V_{in}$ is simply that of $C_{1}$ to ground, $1/sC_{1}$. The output\nresistance is the usual\n\n$$R_{out}=R_D\\parallel r_o,$$\n\nbut there is no signal at the output.\n\nIn short, the direct ground on the source defeats the intended common-gate action. To make a CG amplifier the source must be allowed to move with $V_{in}$, with its dc bias provided e.g. by a resistor or current source to ground, not by a short circuit.",
        "format": "markdown",
        "sha256": "154736c970e98101da4feb47ea9d1f264e2e2e01d578a14dfefcfae15c824715"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It notices that the source node is hard-shorted to ground and correctly concludes that the input produces ideally zero output voltage gain. The additional bias and small-signal discussion is consistent with that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1898,
        "output_tokens": 7295,
        "total_tokens": 9193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1898,
        "output_tokens": 7295,
        "total_tokens": 9193,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is intended to be used as a common-gate\ndevice: the gate is at a fixed bias $V_b$, the drain is loaded\nby $R_D$ and the signal is applied to the source through $C_1$.\nAs drawn, however, the source is tied directly to ground.\n\n### DC operating point\n\n$C_1$ is an open for dc, and\n\n$$V_S = 0,\\qquad V_G = V_b \\;\\;\\Longrightarrow\\;\\; \nV_{GS}=V_b,\\qquad V_{BS}=0 .$$\n\nHence, with $M_1$ on,\n\n$$ I_D \\approx \\frac12 \\mu_n C_{ox}\\frac{W}{L}\n      \\left(V_b-V_{th}\\right)^2\\left(1+\\lambda V_{DS}\\right) $$\n\nand\n\n$$ V_{out,DC}=V_{DD}-I_D R_D .$$\n\nFor saturation we need $V_{out,DC}\\ge V_b-V_{th}$.  $M_1$ is\nsimply a fixed-bias device setting the dc level at the output.\n\n### Small-signal behaviour\n\n$V_b$ is a dc bias, i.e. an ac ground.  Crucially, the source\nnode is also a dc **and ac ground**, because it is shorted\ndirectly to ground in the schematic.  Therefore the signal\nfrom $V_{in}$ cannot develop any voltage at the source:\n\n$$ v_s \\equiv 0 \\qquad\\text{for every } \\omega, $$\n\nindependently of the value of $C_1$.  All of the ac current\ndelivered through $C_1$ is shunted by the ideal ground\nconnection.  Consequently\n\n$$ v_{gs}=v_g-v_s = 0,\\qquad v_{bs}=0,$$\n\nso the dependent sources $g_m v_{gs}$ and $g_{mb}v_{bs}$ are\nboth off.  $M_1$ reduces small-signal-wise to $r_o$ from drain\nto ground.  KCL at the output node gives\n\n$$ \\frac{v_{out}}{R_D}+\\frac{v_{out}}{r_o}=0\n\\;\\;\\Longrightarrow\\;\\; v_{out}=0. $$\n\nHence\n\n$$ \\boxed{A_v=\\frac{v_{out}}{v_{in}}=0} $$\n\nThe circuit does not amplify at all.  The input only sees\n$C_1$ into a short,\n\n$$ Z_{in}\\approx \\frac{1}{sC_1}, \\qquad \ni_{in}\\approx sC_1 v_{in},$$\n\nwhile the output resistance is just\n\n$$ R_{out}=R_D \\parallel r_o .$$\n\n### Remark\n\nTo obtain the intended common-gate amplifier, the hard\nground at the source must be replaced by a dc bias element\nof high ac impedance (e.g. a current source to ground, which\nalso fixes the source dc voltage, since $C_1$ blocks dc).\nThen $v_s\\approx v_{in}$ and $A_v\\approx +g_m(R_D\\parallel r_o)$,\nnon-inverting, as expected for a CG stage.",
        "format": "markdown",
        "sha256": "6bc16386599ab2c9d2e06db0813a060ae9ed8d85980b93459b83fd10a5f72675"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input cannot create a source signal and the ideal small-signal voltage gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1898,
        "output_tokens": 8178,
        "total_tokens": 10076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1898,
        "output_tokens": 8178,
        "total_tokens": 10076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There are two independent (non-ground) nodes, the gate and the drain.\n\n* $C_{GS}$ has voltage $V_G$\n* $C_{DB}$ has voltage $V_D$\n* $C_{GD}$ has voltage $V_G-V_D$, hence it is not an independent state variable\n* $C_{SB}$ is connected between ground and the grounded source, so its voltage is identically zero\n\nHence there are only two independent capacitor voltages. The small-signal denominator is second order, giving\n\n$$\\boxed{2\\text{ poles}}$$",
        "format": "markdown",
        "sha256": "30a041b705d217c67d19f677175b089217b2a12af2264cb29f9c035681e8e501"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted out, while CGS, CGD, and CDB have only two independent capacitor voltages, yielding two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2122,
        "output_tokens": 2760,
        "total_tokens": 4882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2122,
        "output_tokens": 2760,
        "total_tokens": 4882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2558,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the small signal model the only non a.c. ground nodes are\nthe gate and the drain of $M_{1}$.\n\n* $V_{CSB}=0$ : the source is a.c. ground and the bulk is ground.\n  $C_{SB}$ stores no independent energy.\n* $$V_{CGS}=V_{G},\\qquad V_{CDB}=V_{D},\\qquad \n  V_{CGD}=V_{G}-V_{D}=V_{CGS}-V_{CDB}$$\n  so $C_{GS},C_{GD},C_{DB}$ forming a capacitive loop are not\n  independent. Only, say, $V_G$ and $V_D$ can be chosen\n  independently.\n\nHence there are $2$ independent capacitor voltages.\nThe transfer function is second order, i.e. it has\n\n$$2\\ \\text{poles}$$",
        "format": "markdown",
        "sha256": "efb3ed82a12f91e4b10cf4aa9ee1d7d5b466df7ac73e4085d860fa7cd3a48c15"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted by the grounded source and that CGS, CGD, and CDB have only two independent capacitor voltages, giving two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2122,
        "output_tokens": 3520,
        "total_tokens": 5642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2122,
        "output_tokens": 3520,
        "total_tokens": 5642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3249,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small–signal circuit has only two a.c. nodes that are\nnot ground, the gate node and the drain node.\n\nThere are four capacitances shown, but they do not give four\nindependent states.\n\n* $C_{SB}$ is connected between source and bulk.\nBoth source and bulk are at a.c. ground, so\n$$v_{SB}\\equiv 0$$\nand $C_{SB}$ stores no independent state.\n\n* For the remaining three,\n$$\\begin{aligned}\nv_{GS} &= v_G\\\\\nv_{DB} &= v_D\\\\\nv_{GD} &= v_G-v_D = v_{GS}-v_{DB}\n\\end{aligned}$$\nso $v_{GD}$, $v_{GS}$ and $v_{DB}$ are not independent.\n$C_{GS}$, $C_{GD}$ and $C_{DB}$ form a capacitive loop\nto ground. Only two of their voltages can be chosen\nindependently.\n\nHence there are only two independent capacitor voltages,\nthe nodal equations are second order in $s$, and the\ntransfer function $V_{out}/V_{in}$ has\n\n$$2\\ \\text{poles}$$",
        "format": "markdown",
        "sha256": "63ddff1c40e4bf920d8eb7f2c753380c0c4dd3b8c8578460614eeb2fdef52b7a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that CSB is shorted out and only two of the remaining capacitor voltages are independent.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2122,
        "output_tokens": 2913,
        "total_tokens": 5035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2122,
        "output_tokens": 2913,
        "total_tokens": 5035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2591,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Circuit is a single NMOS common-gate stage whose gate\nbias is not fixed, but is derived from its own drain voltage.\nAs drawn the body is tied to the source, so there is no body\neffect.\n\n$$V_{F}=V_{out}{R_{2}\\over R_{1}+R_{2}}\\equiv \\beta_{f}V_{out},\n\\qquad \n\\beta_{f}={R_{2}\\over R_{1}+R_{2}}<1 $$\n\nThe input is applied to the source, the output is taken at\nthe drain.  $V_{GS}$ is the error voltage\n\n$$V_{GS}=V_{F}-V_{in}$$\n\ni.e. the output voltage is sampled by $R_{1},R_{2}$ and compared,\nin series, with the input voltage at the $G\\!-\\!S$ port.  It is a\nseries-shunt, voltage-voltage, negative feedback amplifier,\nthe one-transistor analogue of a non-inverting op-amp stage.\nIncreasing $I_{D}$ lowers $V_{out}$, lowers $V_{F}$, lowers $V_{GS}$\nand hence lowers $I_{D}$.\n\n### DC bias\n\nIn saturation, with $V_{IN},V_{OUT}$ the quiescent values,\n\n$$\\begin{aligned}\nV_{F}&=\\beta_{f}V_{OUT}\\\\\nV_{GS}&=V_{F}-V_{IN}\\\\\nI_{D}&=\\frac{k_{n}}{2}\\,(V_{GS}-V_{th})^{2}\\bigl(1+\\lambda V_{DS}\\bigr)\\\\\nV_{OUT}&=V_{DD}-R_{D}\\!\\left(I_{D}+\\frac{V_{OUT}}{R_{1}+R_{2}}\\right)\n\\end{aligned}$$\n\nThe DC loop stabilises the $Q$ point against $V_{th},k_{n},T$\nvariations. Roughly, since $V_{GS}$ varies only weakly,\n\n$$V_{OUT}\\approx \\frac{V_{IN}+V_{GS}}{\\beta_{f}}  $$\n\nso the dc output is the input level, shifted by $V_{GS}$,\nmultiplied by $1/\\beta_{f}$.\nSaturation, $V_{OUT}-V_{IN}\\ge V_{GS}-V_{th}$, i.e.\n$V_{OUT}\\ge V_{F}-V_{th}$, is normally easily satisfied since\n$V_{OUT}>V_{F}$.  Note the signal source at the source must\nsink the dc drain current $I_{D}$.\n\n### Small signal gain\n\nPut\n\n$$R_{L}=R_{D}\\parallel (R_{1}+R_{2}),\\qquad \nv_{f}= \\beta_{f}v_{out},\\qquad v_{gs}=v_{f}-v_{in}  $$\n\n$$i_{d}=g_{m}v_{gs}+\\frac{v_{out}-v_{in}}{r_{o}},\\qquad\nv_{out}=-i_{d}R_{L}$$\n\nwhence\n\n$$\n\\,A_{v}\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{\\,g_{m}+1/r_{o}\\,}\n             {\\,g_{m}\\beta_{f}+1/r_{o}+1/R_{L}\\,}\\,\n      \\approx \\frac{1}{\\;\\beta_{f}+1/g_{m}R_{L}\\;}\n\\qquad g_{m}r_{o}\\gg1\n$$\n\nFor $r_{o}\\to\\infty$\n\n$$ A_{v}= \\frac{g_{m}R_{L}}{1+g_{m}\\beta_{f}R_{L}}\n       =\\frac1{\\beta_{f}}\\,\\frac{T}{1+T},\n\\qquad \nT\\equiv g_{m}\\beta_{f}R_{L}  $$\n\n$T$ is the loop gain. If $T\\gg1$,\n\n$$\nA_{v}\\approx\\frac1{\\beta_{f}}=1+\\frac{R_{1}}{R_{2}}\n$$\n\npositive, i.e. non-inverting, and set by a resistor ratio,\ninsensitive to $g_{m}$ to first order by the factor $1/(1+T)$.\nThe residual error voltage is $v_{gs}\\approx -v_{in}/(1+T)$.\nFor $\\beta_{f}\\to0$ this reduces to the ordinary CG gain\n$g_{m}R_{L}$; that is the maximum attainable gain.\n\n### Input resistance\n\nThe (signal) current entering the source is $-i_{d}$, so\n$R_{in}=v_{in}/(-i_{d})=R_{L}/A_{v}$, i.e. for $r_{o}\\to\\infty$\n\n$$\nR_{in}= \\frac{1+g_{m}\\beta_{f}R_{L}}{g_{m}}\n      =\\frac1{g_{m}}+\\beta_{f}R_{L}\n      =\\frac{1+T}{g_{m}}\n$$\n\nSeries feedback raises the already low CG input resistance\n$1/g_{m}$ by $1+T$. With a source resistance $R_{S}$ the\ngain from the source is $A_{v}R_{in}/(R_{in}+R_{S})$.\n\n### Output resistance\n\nWith $v_{in}$ shorted, $v_{gs}=\\beta_{f}v_{out}$ at the test\nnode, giving\n\n$$\n\\frac1{R_{out}}=\\frac1{R_{L}}+g_{m}\\beta_{f}+\\frac1{r_{o}},\n\\qquad\\text{i.e.}\\qquad \nR_{out}=R_{L}\\parallel r_{o}\\parallel\\frac1{g_{m}\\beta_{f}}\n\\;\\xrightarrow{r_{o}\\to\\infty}\\;\n\\frac{R_{L}}{1+T}\n$$\n\nVoltage sampling lowers the output resistance by $1+T$;\nit is a fairly stiff voltage output. Finite $R_{S}$ in the\nsource reduces the effective loop gain and raises $R_{out}$.\n\nIn short: large loop gain gives\n$A_{v}\\approx1+R_{1}/R_{2}$, $R_{in}\\approx(1+T)/g_{m}$,\n$R_{out}\\approx R_{D}\\!\\parallel\\!(R_{1}+R_{2})/(1+T)$,\nimproved gain accuracy, linearity and output-pole bandwidth\n$\\approx (1+T)/R_{L}C_{L}$, at the cost of gain being limited\nto $\\lesssim g_{m}R_{L}$, of the loading $R_{1}+R_{2}$ on the\noutput, and of having to supply $I_{D}$ at the input terminal.\nDecreasing $\\beta_{f}$ for larger nominal gain decreases $T$,\nso the $1/\\beta_{f}$ result, the $R_{in}$ increase and the\n$R_{out}$ decrease all become less accurate.",
        "format": "markdown",
        "sha256": "076d219c846070925ee99e7b13c694be1da6409da221c30d798faaf53966171e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative-feedback operation, with the correct closed-loop gain. Optional details do not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1766,
        "output_tokens": 15993,
        "total_tokens": 17759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1766,
        "output_tokens": 15993,
        "total_tokens": 17759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14358,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistor is drawn mirrored, with its gate on the right.\n\n* drain: to $V_{out}$\n* source: to $V_{in}$\n* gate: to $V_F$, the tap of $R_1,R_2$\n* bulk tied to source, hence no body effect as drawn.\n\nIt is a common-gate NMOS whose gate is not at ac ground,\nbut is driven by a fraction of the output. This is series mixing\nat the input, $v_{gs}=v_F-v_{in}$, and voltage sampling at the\noutput: a series-shunt, voltage-voltage, negative feedback amplifier.\n\nDefine\n$$\n\\beta \\equiv \\frac{R_{2}}{R_{1}+R_{2}},\\qquad \nV_F=\\beta V_{out},\\qquad \nR_L \\equiv R_D\\parallel (R_1+R_2) .\n$$\n\n### DC bias\n\nGate current is zero, so\n$$\nV_{GS}=V_F-V_{IN}= \\beta V_{out}-V_{IN},\\qquad \nV_{DS}=V_{out}-V_{IN}\n$$\n$$\nI_D=\\tfrac12 k_n\\,(V_{GS}-V_{TH})^{2}\\bigl(1+\\lambda V_{DS}\\bigr)\n\\quad\\text{in saturation}\n$$\nwith $k_n=\\mu_nC_{ox}W/L$, and KCL at the output,\n$$\n\\frac{V_{DD}-V_{out}}{R_D}=I_D+\\frac{V_{out}}{R_1+R_2}\\; .\n$$\nThese two equations determine $I_D$ and $V_{out}$ for a given\n$V_{IN}$. Incrementally the loop is negative: $I_D\\uparrow\\;\n\\Rightarrow V_{out}\\downarrow\\Rightarrow V_F\\downarrow\\Rightarrow\nV_{GS}\\downarrow\\Rightarrow I_D\\downarrow$, so the bias is desensitised\nto $V_{TH}$, $k_n$, etc. by the loop gain below.\n\nSaturation is essentially automatic:\n$$\nV_{GD}=V_F-V_{out}=-(1-\\beta)V_{out}\n      =-\\frac{R_1}{R_1+R_2}V_{out}<V_{TH}\\qquad (V_{out}>0).\n$$\nAt dc, $V_{out}\\approx (V_{IN}+V_{GS})/\\beta$. The input source must\nsink the dc source current $\\approx I_D$.\n\n### Small-signal gain\n\nFor signals $V_{DD}$ is ac ground and, the gate drawing no current,\n$$\nv_f=\\beta v_{out},\\qquad v_{gs}=v_f-v_{in}= \\beta v_{out}-v_{in}.\n$$\nKCL at the drain, with $g_o=1/r_o$,\n$$\n\\frac{v_{out}}{R_L}+g_m v_{gs}+\\frac{v_{out}-v_{in}}{r_o}=0,\n$$\ni.e.\n$$\nv_{out}\\!\\left(\\frac1{R_L}+g_m\\beta+g_o\\right)\n      =v_{in}\\,(g_m+g_o).\n$$\nHence, positive, as expected for a source input,\n$$\n\\,A_v\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{g_m+g_o}{\\,1/R_L+\\beta g_m+g_o\\,}\\,\n\\approx \\frac{g_mR_L}{1+g_m\\beta R_L}\\quad (r_o\\to\\infty).\n$$\n$g_mR_L$ is the ordinary common-gate open-loop gain and\n$T\\simeq g_m\\beta R_L$ is the loop gain, $A_v=A_{OL}/(1+T)$.\nFor large loop gain,\n$$\nA_v\\;\\approx\\;\\frac1\\beta \\;=\\; \\frac{R_1+R_2}{R_2}\n      \\;=\\;1+\\frac{R_1}{R_2},\n$$\ni.e. the gain is set by a resistor ratio, like a non-inverting\nop-amp, with sensitivity to $g_m$, $R_D$, temperature etc. reduced\nby $1+T$. Checks: $\\beta\\to0$ (gate ac ground) gives $A_v\\to g_mR_L$,\nthe CG result; $\\beta\\to1$ gives $A_v\\to1$.\n\n### Input resistance\n\nThe (signal) current delivered to the source equals the drain\ncurrent, and from the output KCL its magnitude is $i_{in}=v_{out}/R_L$.\nThus\n$$\nR_{in}=\\frac{v_{in}}{i_{in}}=\\frac{R_L}{A_v}\n      =\\frac{1+R_L(\\beta g_m+g_o)}{g_m+g_o}\n      \\;\\approx\\;\\frac{1+g_m\\beta R_L}{g_m}\n      =\\frac1{g_m}+\\beta R_L .\n$$\nSeries feedback has raised the familiar CG value $1/g_m$ by the\nfactor $1+T$. With a source resistance $R_S$ the overall gain is\n$A_v\\,R_{in}/(R_{in}+R_S)$.\n\n### Output resistance\n\nShort $v_{in}$ and apply a test voltage at the output. Then\n$v_{gs}=\\beta v_{test}$ and\n$$\ni_{test}=v_{test}\\!\\left(\\frac1{R_D}+\\frac1{R_1+R_2}\n      +\\frac1{r_o}+\\beta g_m\\right),\n$$\n$$\n\\,R_{out}= \\frac{1}{\\,1/R_D+1/(R_1+R_2)+1/r_o+\\beta g_m\\,}\n = R_D\\parallel(R_1+R_2)\\parallel\\frac{r_o}{1+\\beta g_m r_o}\\,\n \\approx R_D\\parallel(R_1+R_2)\\parallel\\frac1{\\beta g_m}\\, .\n$$\nShunt (voltage) sampling has lowered the resistance looking into\nthe drain from $r_o$ to $\\approx 1/\\beta g_m$; for $\\beta=1$ this is\nthe diode-connected value $1/g_m$.\n\nIn short: one CG device with drain-to-gate resistive feedback\nbehaves as a resistor-ratio-defined non-inverting voltage amplifier,\n$A_v\\approx 1+R_1/R_2$ when $g_m\\beta R_L\\gg1$, with input resistance\nraised to $\\approx 1/g_m+\\beta R_L$, output resistance lowered by the\nfeedback, and a correspondingly stabilised dc operating point, at the\nprice of gain limited to at most the common-gate value $g_mR_L$.",
        "format": "markdown",
        "sha256": "92280db2d776f5001878217b623b0832583a4d59497ac4debdfa111414058fe9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and gives the correct closed-loop gain and large-loop-gain limit. Optional analyses do not undermine the essential answer.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1766,
        "output_tokens": 13970,
        "total_tokens": 15736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1766,
        "output_tokens": 13970,
        "total_tokens": 15736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12420,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The device is an NMOS whose bulk is tied to its source,\nso that there is no body effect. The input is applied to the\nsource, the output is taken at the drain, and the gate is not\nat a fixed bias. Instead a fraction of the output is fed back\nto the gate.\n\n$$\nV_F=\\frac{R_2}{R_1+R_2}V_{out}\\equiv \\beta V_{out},\n\\qquad \n\\beta =\\frac{R_2}{R_1+R_2}<1\n$$\n\nIt is a common-gate stage with drain-to-gate voltage feedback.\n\n### DC operation\n\nWith $V_{IN}$ the dc level at the input,\n\n$$\\begin{aligned}\nV_{F,Q}&=\\beta V_{OUT,Q}\\\\\nV_{GSQ}&=V_{F,Q}-V_{IN,Q}\\\\\nI_{DQ}&=\\frac12\\mu_nC_{ox}\\frac WL\\,\n\\bigl(V_{GSQ}-V_{TH}\\bigr)^2\\bigl(1+\\lambda V_{DSQ}\\bigr)\n\\end{aligned}$$\n\nand, at the output node,\n\n$$\n\\frac{V_{DD}-V_{OUT,Q}}{R_D}=I_{DQ}+\\frac{V_{OUT,Q}}{R_1+R_2}\\; .\n$$\n\nThe feedback is negative at dc as well: $I_D\\uparrow\\Rightarrow\nV_{out}\\downarrow\\Rightarrow V_F\\downarrow\\Rightarrow V_{GS}\\downarrow\n\\Rightarrow I_D\\downarrow$.  Hence to first order\n\n$$\nV_{OUT,Q}\\approx\\frac{V_{IN,Q}+V_{GSQ}}{\\beta},\n$$\n\ni.e. the output is a stepped-up replica of the input level.\nSaturation, $V_{out}\\ge V_F-V_{TH}$, is easily satisfied since\n$\\beta<1$.\n\n### Small-signal gain\n\nLet lower-case letters denote increments. The gate draws\nno current, so\n\n$$\nv_f=\\beta v_{out},\\qquad \nv_{gs}=v_f-v_{in}= \\beta v_{out}-v_{in}.\n$$\n\nThe loading at the output by the divider is\n\n$$\nR_L' = R_D\\;\\Big\\|\\;(R_1+R_2).\n$$\n\nKCL at the drain, with $i_d$ flowing from drain to source,\n\n$$\n\\frac{v_{out}}{R_L'}+i_d=0,\\qquad\ni_d=g_m v_{gs}+\\frac{v_{out}-v_{in}}{r_o}.\n$$\n\nHence\n\n$$\n-\\frac{v_{out}}{R_L'}\n   =g_m\\bigl(\\beta v_{out}-v_{in}\\bigr)+\\frac{v_{out}-v_{in}}{r_o},\n$$\n\n$$\n\\,A_v\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{g_m+1/r_o}{\\,g_m\\beta+1/r_o+1/R_L'\\,}\n      =\\frac{g_mr_o+1}{1+g_mr_o\\beta+r_o/R_L'}\\,  .\n$$\n\nIntuitively: $v_{in}\\uparrow\\to v_{gs}\\downarrow\\to i_d\\downarrow\\to\nv_{out}\\uparrow$, so the gain is positive; the rise in $v_{out}$\nraises $v_f$ and partly restores $v_{gs}$ - negative feedback.\n\nFor $g_mr_o\\gg1$,\n\n$$\nA_v\\approx \\frac{1}{\\displaystyle \\beta+\\frac{1}{g_mR_L'}} \n        =\\frac{1/\\beta}{1+1/(g_m\\beta R_L')}.\n$$\n\nDefining the loop gain (approximately)\n\n$$\nT \\approx g_m\\beta\\,\\bigl(R_L'\\|r_o\\bigr),\n$$\n\nif $T\\gg1$,\n\n$$\n\\,A_v\\approx\\frac1\\beta = 1+\\frac{R_1}{R_2}\\,\n$$\n\na non-inverting gain set by a resistor ratio, largely\nindependent of $g_m$, $R_D$ and device parameters. The maximum\nattainable gain is of course limited to the open-loop\ncommon-gate gain $\\approx g_m(R_L'\\|r_o)$, reached when\n$\\beta$ is made so small that $T\\not\\gg1$.\n\n### Input resistance\n\nThe (downward) source current equals $i_d=-v_{out}/R_L'$,\nso the current entering the source port is $v_{out}/R_L'$ and\n\n$$\nR_{in}=\\frac{v_{in}}{i_{in}}=\\frac{R_L'}{A_v}\n      =\\frac{1+R_L'\\bigl(g_m\\beta+1/r_o\\bigr)}{g_m+1/r_o}\n      \\;\\approx\\;\\frac{1+g_m\\beta R_L'}{g_m}\n      =\\frac1{g_m}+\\beta R_L'.\n$$\n\nFor $\\beta=0$ this reduces to the familiar $\\approx1/g_m$ of\na common-gate stage. The series mixing of the feedback\nraises $R_{in}$ by roughly $(1+T)$, to $\\approx\\beta R_L'$ for\n$T\\gg1$. With a source resistance $R_S$, $v_{out}/v_s=\nA_vR_{in}/(R_{in}+R_S)$.\n\n### Output resistance\n\nWith $v_{in}$ shorted for ac ($R_S=0$), applying a test\nvoltage at the output gives $v_{gs}=\\beta v_x$, whence the\ntotal resistance at the output terminal, including $R_D$\nand $R_1+R_2$, is\n\n$$\n\\,R_{out}\n   =\\frac{1}{\\,g_m\\beta+1/r_o+1/R_L'\\,}\n   =R_L'\\;\\big\\|\\;r_o\\;\\Big\\|\\;\\frac{1}{g_m\\beta}\n   \\;\\approx\\;\\frac{1}{g_m\\beta}\\quad (T\\gg1)\\,  .\n$$\n\nVoltage (shunt) sampling at the output reduces $R_{out}$\nby $\\approx(1+T)$ from $R_D\\|(R_1+R_2)\\|r_o$. \nIn general, for input source resistance $R_S$,\n$R_{out}=\\Bigl[1/R_L'+\n\\bigl(g_m\\beta+1/r_o\\bigr)/\\bigl(1+(g_m+1/r_o)R_S\\bigr)\\Bigr]^{-1}$.\n\n### Feedback interpretation\n\n sampled quantity: $v_{out}$; returned quantity: $v_f=\\beta v_{out}$,\nsubtracted in series from $v_{in}$ in $v_{gs}$: a series-shunt\n(voltage-voltage) feedback amplifier. Feedback thus\nstabilises the gain to $1/\\beta$, raises $R_{in}$, lowers\n$R_{out}$, reduces distortion and sensitivity to $g_m$,\nat the price of reduced gain.\n\nIn practice $R_1+R_2$ loads the output and dissipates power;\nmaking it large raises the gate-node pole\n$\\sim\\bigl[(R_1\\|R_2)(C_{gs}+C_{gd})\\bigr]^{-1}$, which lies inside\nthe loop together with the output pole and must be kept\nhigh enough for phase margin. The pull-up at the output is\nonly through $R_D$, so sinking capability (via $M_1$) is much\nstronger than sourcing capability.",
        "format": "markdown",
        "sha256": "c6d82add94c56bf3bc951036344e32dfd248f084bfa3240b43eabab95f856a54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback. Its closed-loop gain is consistent with the stated topology, including the finite-ro refinement; extra discussion is not required.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1766,
        "output_tokens": 20746,
        "total_tokens": 22512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1766,
        "output_tokens": 20746,
        "total_tokens": 22512,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19002,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are NMOS. The arrowed terminal is the\nsource, with the body shorted to the source, as drawn.\nHence to first order there is no body effect in either\ndevice.\n\n* $M_{1}$: drain to $V_{DD}$, gate $=$ input, source $=$ output.\n  It is a common-drain device.\n* $M_{2}$: gate at a fixed bias $V_{b}$, source to ground,\n  drain $=$ output. It is a saturated NMOS current source.\n\nThis is a source follower with an active, constant current,\nload - a class A voltage buffer and d-c level shifter.\n\n### 1. D-C bias\n\nGate currents are zero, so with no d-c load at the output\n\n$$I_{D1}=I_{D2}\\equiv I_{D}$$\n\n$M_{2}$ fixes, to first order neglecting $\\lambda$,\n\n$$ \nI_{D}= \\frac12\\mu_{n}C_{ox}\\left(\\frac WL\\right)_{2}\n      \\left(V_{b}-V_{TH}\\right)^{2}\n      =\\frac12\\mu_{n}C_{ox}\\left(\\frac WL\\right)_{2}V_{ov2}^{2}\n$$\n\n$M_{1}$ must carry the same current:\n\n$$\nI_{D}= \\frac12\\mu_{n}C_{ox}\\left(\\frac WL\\right)_{1}\n      \\left(V_{in}-V_{out}-V_{TH}\\right)^{2}\n$$\n\ni.e.\n\n$$ V_{GS1}=V_{TH}+V_{ov1},\\qquad \nV_{ov1}= \\sqrt{\\frac{2I_{D}}{\\mu_{n}C_{ox}(W/L)_{1}}} $$\n\n$$ V_{out}=V_{in}-V_{GS1}=V_{in}-V_{TH}-V_{ov1} $$\n\nThe output follows the input with an essentially constant\n$V_{GS1}$ drop. With $\\lambda\\ne0$, $I_D$ varies slightly\nwith $V_{out}$ through $r_{o1},r_{o2}$, giving a slope\nslightly $<1$.\n\nSaturation requires\n\n$$\\begin{aligned}\nM_{2}:&\\;V_{DS2}=V_{out}\\ge V_{GS2}-V_{TH}=V_{ov2}\\\\\nM_{1}:&\\;V_{DS1}=V_{DD}-V_{out}\\ge V_{GS1}-V_{TH}\n      \\;\\Longleftrightarrow\\;V_{in}\\le V_{DD}+V_{TH}\n\\end{aligned}$$\n\nusually satisfied for $V_{in}\\le V_{DD}$.\n\nHence, approximately,\n\n$$V_{out,min}\\approx V_{ov2},\\qquad \n  V_{out,max}\\approx V_{DD}-V_{TH}-V_{ov1}\\;\\;{\\rm for}\\;V_{in,max}=V_{DD} $$\n\nThe follower cannot reach the positive rail; it loses\nat least $V_{GS1}$. It can go to within $V_{ov2}$ of ground.\n\n### 2. Small signal model\n\n$V_{DD}$ and $V_b$ are a-c ground. $M_1$: $v_{gs1}=v_{in}-v_{out}$,\n$v_{ds1}=-v_{out}$. $M_2$: $v_{gs2}=0$, so it is simply $r_{o2}$\nto ground. With an external $R_L$, KCL at the output,\n\n$$g_{m1}(v_{in}-v_{out})-\\frac{v_{out}}{r_{o1}}\n      =\\frac{v_{out}}{r_{o2}}+\\frac{v_{out}}{R_{L}}$$\n\n$$ A_v\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{g_{m1}}\n             {g_{m1}+g_{o1}+g_{o2}+G_{L}} $$\n\n$$ g_{mi}=\\sqrt{2\\mu_nC_{ox}(W/L)_iI_D}= \\frac{2I_D}{V_{ovi}},\\qquad\n   r_{oi}= \\frac1{\\lambda_i I_D}$$\n\nIn ordinary form, $R_L' = r_{o1}\\parallel r_{o2}\\parallel R_L$,\n\n$$ A_v = \\frac{R_L'}{R_L'+1/g_{m1}} <1 $$\n\nno phase inversion, $\\approx 1$ for $g_{m1}r_o\\gg1$.\nWith a resistive load the larger current in $M_1$ required\nby $R_L$ makes $V_{GS1}$ $V_{out}$ dependent, and $A_v$ falls.\n\nInput resistance, low frequency,\n\n$$ R_{in}= \\frac{v_{in}}{i_{in}}\\approx\\infty $$\n\ngate current being zero. The effective input capacitance is\nsmall, $C_{in}\\approx C_{gd1}+C_{gs1}(1-A_v)$, because $C_{gs1}$\nis bootstrapped.\n\nOutput resistance, $v_{in}=0$,\n\n$$ R_{out}= r_{o2}\\;\\Big\\|\\; \\left(\\frac{r_{o1}}{1+g_{m1}r_{o1}}\\right)\n        = r_{o2}\\parallel r_{o1}\\parallel\\frac1{g_{m1}}\n        \\approx \\frac1{g_{m1}} $$\n\nin parallel with any $R_L$. Increasing $I_D$ or $(W/L)_1$\nincreases $g_{m1}$, makes $A_v\\to1$, lowers $R_{out}$ and\nincreases bandwidth $\\approx [2\\pi R_{out}C_L]^{-1}$ at the\nexpense of static power $P\\approx V_{DD}I_D$.\n\n### 3. Large signal behaviour, merits and limits\n\nIdeally $I_{D1}$ is constant, $V_{GS1}$ is constant, so the\ntransfer $V_{out}=V_{in}-{\\rm const}$ is very linear. Non-\nlinearity comes from $\\lambda$ and, in a normal $p$-substrate\nprocess where the body of $M_1$ cannot be tied to its source,\nfrom body effect: then $g_{m1}\\to g_{m1}+g_{mb1}$ in $A_v$ and\n$R_{out}$, and $V_{TH1}$ becomes $V_{out}$ dependent.\n\nCurrent drive is asymmetric. $M_1$ can supply a large\ncurrent to a load on a rising output, $v_{gs1}$ increasing\ntransiently. On a falling output, or sinking current, the\nmaximum available current is the bias current $I_D$ set by\n$M_2$. The negative slew rate into $C_L$ is $\\approx I_D/C_L$.\n\nIn short:\n\n| $A_v$ | $R_{in}$ | $R_{out}$ | Phase |\n|---|---|---|---|\n| $\\dfrac{g_{m1}}{g_{m1}+g_{o1}+g_{o2}+G_L}\\lesssim1$ | $\\approx\\infty$ | $\\approx1/g_{m1}$ | $0^\\circ$ |\n\nIt is used where high input impedance, low output\nimpedance, near-unity gain and a $V_{GS}$ level shift are\nwanted, e.g. as an output buffer, at the cost of headroom\n$V_{TH}+V_{ov1}$ at the top, static class-A power, and\nlimited current sinking.",
        "format": "markdown",
        "sha256": "6b2a0925515829834ecb3c4a5c3e04952ea5c8a6936d707ac6d6d0a5d12edf06"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, and gives a positive gain below but near unity. The ideal no-body-effect model is consistent with the full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 14607,
        "total_tokens": 15865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 14607,
        "total_tokens": 15865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12813,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two devices are NMOS devices.\n$M_{1}$ has its drain at the a.c. ground $V_{DD}$, its gate\nis the input and its source is the output. $M_{2}$ has a\nfixed gate voltage $V_{b}$. It is not a signal device.\n\nIt is a common drain stage, a source follower, with an\nactive current source load.\n\n$$M_{1}: {\\rm input\\; device}\\qquad \n  M_{2}: {\\rm bias\\; current\\; source}$$\n\nThe current source gives a much larger incremental\nresistance than a resistor, $r_{o2}$, with much less voltage\ndrop.\n\n### D.C. bias\n\nWith no d.c. load at the output the gate currents are zero,\nhence, apart from channel length modulation,\n\n$$ I_{D1}=I_{D2}\\equiv I_{B} $$\n\n$M_{2}$ in saturation fixes, to first order,\n\n$$ I_{B}\\approx \n\\frac12\\mu_{n}C_{ox}\\Bigl(\\frac WL\\Bigr)_{2}\n\\bigl(V_{b}-V_{TH2}\\bigr)^{2}\n      =\\frac12\\mu_{n}C_{ox}\\Bigl(\\frac WL\\Bigr)_{2}V_{ov2}^{2} $$\n\nand $M_{1}$ must develop the $V_{GS1}$ necessary to carry\n$I_{B}$ :\n\n$$ I_{B}\\approx \n\\frac12\\mu_{n}C_{ox}\\Bigl(\\frac WL\\Bigr)_{1}\n\\bigl(V_{in}-V_{out}-V_{TH1}\\bigr)^{2}  $$\n\ni.e.\n\n$$ V_{out}=V_{in}-V_{GS1}\n       =V_{in}-V_{TH1}-V_{ov1} $$\n\n$$ V_{ov1}= \\sqrt{\\frac{2I_{B}}\n{\\mu_{n}C_{ox}(W/L)_{1}}}\\;, \\qquad \ng_{m1}= \\frac{2I_{B}}{V_{ov1}}=\n\\sqrt{2\\mu_{n}C_{ox}(W/L)_{1}I_{B}}  .$$\n\nTo first order $I_{B}$ and hence $V_{GS1}$ are constant.\nThe output follows the input with an essentially constant\nlevel shift $V_{GS1}$ downward, with unity slope.  In a\ncommon $p$--substrate process the bulk of $M_{1}$ is at\nground, $V_{BS1}=-V_{out}$, so $V_{TH1}$ increases with\n$V_{out}$ and the shift is not quite constant.  This is\nthe body effect, represented below by $g_{mb1}$.  For a\nbulk-to-source strapped device $g_{mb1}\\to0$.\n\nFor both devices to stay in saturation\n\n* $M_{2}$: $\\;V_{DS2}\\ge V_{GS2}-V_{TH2}$ i.e. \n  $$V_{out}\\ge V_{b}-V_{TH2}=V_{ov2}$$\n* $M_{1}$: $\\;V_{DD}-V_{out}\\ge V_{in}-V_{out}-V_{TH1}$ i.e.\n  $$V_{in}\\le V_{DD}+V_{TH1}$$\n\nin practice satisfied for $V_{in}\\le V_{DD}$.  Hence the\nuseful output range is approximately\n\n$$ V_{ov2}\\;\\lesssim\\;V_{out}\\;\\lesssim\\;V_{DD}-V_{GS1} $$\n\nThe output cannot reach $V_{DD}$; it is $V_{GS1}$ below\nthe maximum input.  For very low $V_{in}$, $M_{1}$ cuts off\nand $M_{2}$ pulls $V_{out}$ to ground.\n\nStatic power is $P\\approx V_{DD}I_{B}$, class-A.\n\n### Small signal behaviour\n\n$V_{DD}$ and $V_{b}$ are a.c. ground. $M_{2}$ appears at the\noutput simply as $r_{o2}$ to ground.  KCL at the output,\nwith $v_{gs1}=v_{in}-v_{out}$, $v_{bs1}=-v_{out}$,\n\n$$ g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}\n      -\\frac{v_{out}}{r_{o1}}=\\frac{v_{out}}{r_{o2}} $$\n\ni.e.\n\n$$ A_{v}\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{g_{m1}}\n             {g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n      =\\frac{g_{m1}\\,(r_{o1}\\!\\parallel\\! r_{o2})}\n             {1+(g_{m1}+g_{mb1})(r_{o1}\\!\\parallel\\! r_{o2})}\n      \\;<\\;1 $$\n\npositive, non-inverting.  With $g_{m}r_{o}\\gg1$,\n$A_{v}\\approx g_{m1}/(g_{m1}+g_{mb1})$, typically\n$0.7$--$0.95$.  With bulk tied to source $g_{mb1}=0$ and\n$A_{v}\\to1$ for $r_{o}\\to\\infty$.  With a load $R_{L}$ add\n$1/R_{L}$ to the denominator.\n\nInput resistance at low frequency is the gate resistance,\n\n$$ R_{in}\\approx \\infty $$\n\napart from $C_{gd1}+C_{gs1}(1-A_{v})$, the latter being\nsmall because $A_{v}\\approx1$.\n\nResistance looking into the source of $M_{1}$, in parallel\nwith $r_{o2}$,\n\n$$ R_{out}= \\frac{1}{g_{m1}+g_{mb1}+g_{o1}+g_{o2}}\n        =\\frac{1}{g_{m1}+g_{mb1}}\\;\\Big\\|\\;r_{o1}\\;\\Big\\|\\;r_{o2}\n        \\;\\approx\\;\\frac1{g_{m1}} $$\n\nnormally a few hundred ohms to a few k$\\Omega$.  Hence\nthe dominant pole with a capacitive load $C_{L}$ is at\nthe output,\n\n$$ f_{p,out}\\approx\\frac{1}{2\\pi R_{out}C_{L}} $$\n\nwhich is high because $R_{out}$ is low.\n\n### Use and limitations\n\nIt is a voltage buffer and d.c. level shifter: very\nhigh $R_{in}$, low $R_{out}$, voltage gain close to, but\nless than, unity, wide bandwidth, able to drive resistive\nand capacitive loads.\n\nLimitations are the $V_{GS1}$ loss of headroom,\n$g_{mb}$ and finite $r_{o}$ reducing the gain below 1\nand making it somewhat $V_{out}$ dependent, and\nclass-A sinking: $M_{1}$ can source a large current, but\nthe current that can be sunk from a load is limited to\n$I_{B}$.  The negative slew rate with $C_{L}$ is\n$\\approx I_{B}/C_{L}$.  Increasing $I_{B}$ or $(W/L)_{1}$\nincreases $g_{m1}$, makes $A_{v}$ closer to 1, lowers\n$R_{out}$ and improves slew and distortion, at the cost\nof power and of $V_{ov2}$ headroom.",
        "format": "markdown",
        "sha256": "239b798c7c2d8f3056692be3225150ed080d8594caff1072ddf5433b652ef820"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and derives the positive, sub-unity gain with body effect and finite output resistances.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 12226,
        "total_tokens": 13484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 12226,
        "total_tokens": 13484,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10421,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two devices are NMOS, $M_{1}$ on top of $M_{2}$.\n$M_{1}$ has its drain at a-c ground, $V_{DD}$, its gate is the\ninput and its source is the output. $M_{2}$ has a fixed gate\nbias $V_{b}$, its drain is the output and its source is ground.\nIt is a common drain, i.e. source follower, stage biased by\nan active current source load.\n\n$M_{1}$ is the follower, $M_{2}$ in saturation is to first order\na constant current $I_{B}$ with a large incremental resistance\n$r_{o2}$ to ground. No d-c gate current flows.\n\n### D-C bias\n\nWith no d-c load at the output\n\n$$I_{D1}=I_{D2}\\equiv I_{B}$$\n\n$$ \nI_{B}\\approx \\frac12\\mu_{n}C_{ox}\\Bigl(\\frac WL\\Bigr)_{2}\n      \\bigl(V_{b}-V_{th2}\\bigr)^{2}\\bigl(1+\\lambda_{2}V_{out}\\bigr)\n$$\n\n$$ \nI_{B}\\approx \\frac12\\mu_{n}C_{ox}\\Bigl(\\frac WL\\Bigr)_{1}\n      \\bigl(V_{in}-V_{out}-V_{th1}\\bigr)^{2}\n      \\bigl(1+\\lambda_{1}(V_{DD}-V_{out})\\bigr)\n$$\n\ni.e. to first order\n\n$$ V_{out}=V_{in}-V_{GS1},\\qquad \nV_{GS1}=V_{th1}+\\sqrt{\\frac{2I_{B}}\n{\\mu_{n}C_{ox}(W/L)_{1}}}\\equiv V_{th1}+V_{ov1} $$\n\nThe output follows the input, level shifted down by one\n$V_{GS}$. $I_{B}$, hence $g_{m1}$, is set by $V_{b}$ and $M_{2}$,\nessentially independent of $V_{in}$. Static dissipation is\n$V_{DD}I_{B}$.\n\nSaturation: for $M_{2}$\n\n$$V_{DS2}=V_{out}\\ge V_{GS2}-V_{th2}=V_{ov2}$$\n\nfor $M_{1}$\n\n$$V_{DS1}=V_{DD}-V_{out}\\ge V_{GS1}-V_{th1}\\iff V_{in}\\lesssim V_{DD}+V_{th1}$$\n\nnormally always satisfied.  Hence in the useful range\n\n$$ V_{in,min}\\approx V_{GS1}+V_{ov2},\\qquad \n   V_{out,min}\\approx V_{ov2},\\qquad \n   V_{out,max}\\approx V_{DD}-V_{GS1}\\;\\;{\\rm for}\\;V_{in,max}=V_{DD}. $$\n\nBelow this $M_{2}$ goes triode and $V_{out}\\to0$; $M_{1}$ cuts off\nfor very low $V_{in}$. With $\\lambda\\ne0$, $I_{B}$ varies\nslightly with $V_{out}$, so $V_{GS1}$ varies slightly with\n$V_{out}$ - the source of the gain error below.\n\nAs drawn the bulk is tied to the source, so $V_{BS}=0$ for\nboth devices. In a common $p$-substrate process the bulk of\n$M_{1}$ is at ground; then $V_{th1}$ increases with $V_{out}$\nand a $g_{mb1}$ term appears below.\n\n### Small signal behaviour\n\n$g_{m1}=\\sqrt{2\\mu_{n}C_{ox}(W/L)_{1}I_{B}}=2I_{B}/V_{ov1}$,\n$r_{oi}=1/\\lambda_{i}I_{B}$. $M_{2}$ has $v_{gs2}=0$; incrementally\nit is simply $r_{o2}$ from output to ground. KCL at the output,\n\n$$g_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}\n      -\\frac{v_{out}}{r_{o1}}-\\frac{v_{out}}{r_{o2}}=0$$\n\nwith $g_{mb1}=0$ for bulk-source tie as drawn. Hence\n\n$$\\;\n\\frac{v_{out}}{v_{in}}=\n\\frac{g_{m1}\\,(r_{o1}\\!\\parallel\\! r_{o2})}\n     {1+(g_{m1}+g_{mb1})(r_{o1}\\!\\parallel\\! r_{o2})}\n=\n\\frac{r_{o1}\\!\\parallel\\! r_{o2}}\n     {1/(g_{m1})+r_{o1}\\!\\parallel\\! r_{o2}}\\;\\;{\\rm approx.}\n$$\n\nnon-inverting, $<1$, typically $0.8$--$0.95$. With an external\n$R_{L}$, replace $r_{o2}$ by $r_{o2}\\!\\parallel\\! R_{L}$. The\nactive load gives a much larger $r_{o1}\\!\\parallel\\! r_{o2}$,\nhence gain much closer to unity and much more constant\n$I_{B}$, than a resistive or diode load.\n\nInput resistance is the gate resistance,\n\n$$R_{in}\\approx \\infty\\qquad\\text{d-c}$$\n\nwith input capacitance $C_{in}\\approx C_{gd1}+C_{gs1}(1-A_{v})$,\nsmall because $1-A_{v}\\ll1$; there is essentially no Miller\nmultiplication.\n\nOutput resistance, $v_{in}=0$,\n\n$$\\;\nR_{out}=r_{o1}\\parallel r_{o2}\\parallel\\frac{1}{g_{m1}+g_{mb1}}\n      \\approx \\frac{1}{g_{m1}+g_{mb1}}\\;\n$$\n\nlow, set by the bias current through $g_{m1}$. This is the\npurpose of the circuit: a voltage buffer / level shifter\nwith high $R_{in}$, low $R_{out}$, gain $\\approx1$.\n\nThe dominant high frequency poles are approximately\n$1/R_{out}C_{L}$ at the output, large because $R_{out}$ is\nsmall, and $1/R_{sig}C_{in}$ at the input.\n\n### Large signal, limitations\n\n$M_{1}$ can source $\\gg I_{B}$ on a positive excursion, but\nit can sink at most $I_{B}$, the current in $M_{2}$. Negative\nslew into $C_{L}$ is limited to $I_{B}/C_{L}$, and a d-c $R_{L}$\nsteals current from $M_{1}$, making $V_{GS1}$ and $A_{v}$\nsignal dependent. Headroom is lost at the top by $V_{GS1}$\nand at the bottom by $V_{ov2}$ of the current source.\nIncreasing $I_{B}$ raises $g_{m1}$, lowers $R_{out}$, improves\ngain and speed, at the cost of power and of larger $V_{GS1}$\nand device sizes. Lower $V_{ov2}$ improves swing but lowers\n$r_{o2}$.\n\nIn short: an NMOS source follower with NMOS current-source\nload, $A_{v}\\lesssim1$, $R_{in}\\approx\\infty$, \n$R_{out}\\approx1/g_{m1}$, used as a buffer and d-c level shift\nbetween a high impedance gain stage and a low impedance load.",
        "format": "markdown",
        "sha256": "d82df6c7db675be6ae29c03e70baca9095055357684bf1b24ef11c89661cc517"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, and gives the correct positive, sub-unity gain and low output resistance. Minor details do not undermine the essential analysis.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 14764,
        "total_tokens": 16022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12958,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1258,
        "output_tokens": 14764,
        "total_tokens": 16022,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12958,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the static CMOS inverter, a NOT gate.\n\n$M_{1}$ is the NMOS pull-down device, its source and body\nto ground. $M_{2}$ is the PMOS pull-up device, its source and\nbody to $V_{DD}$. Hence there is no body effect. The gates\nare the common input, the drains the common output.\n\n$$\\begin{aligned}\nV_{GS1}&=V_{in}, & V_{DS1}&=V_{out}\\\\\nV_{SG2}&=V_{DD}-V_{in}, & V_{SD2}&=V_{DD}-V_{out}\n\\end{aligned}$$\n\nPut \n$\\beta_{n}=\\mu_{n}C_{ox}(W/L)_{1}$, $\\beta_{p}=\\mu_{p}C_{ox}(W/L)_{2}$,\n$V_{tn}>0$, $V_{tp}<0$.\n\n### Static operation\n\n| $V_{in}$ | $M_{1}$ | $M_{2}$ | $V_{out}$ |\n| :--- | :--- | :--- | :--- |\n| $0$, logic 0 | OFF | ON | $V_{DD}$, logic 1 |\n| $V_{DD}$, logic 1 | ON | OFF | $0$, logic 0 |\n\nIn either steady state one device is off, so (apart from\nleakage) there is no d-c path $V_{DD}\\to$ GND and no\nstatic power. The output swings rail to rail,\n$V_{OH}=V_{DD}$, $V_{OL}=0$.\n\n### Voltage transfer characteristic\n\nWith no d-c load $I_{D1}=I_{D2}$. As $V_{in}$ rises from 0 to\n$V_{DD}$, $V_{out}$ falls monotonically from $V_{DD}$ to 0.\n\n1. $V_{in}<V_{tn}$: $M_{1}$ off, $M_{2}$ in triode with\n$I_D=0$, so $V_{SD2}=0$, $V_{out}=V_{DD}$.\n\n2. $V_{in}$ just $>V_{tn}$, $V_{out}$ still high: $M_{1}$\nsaturated, $V_{out}\\ge V_{in}-V_{tn}$; $M_{2}$ in triode,\n$V_{out}>V_{in}+|V_{tp}|$.\n$$\\frac{\\beta_n}{2}(V_{in}-V_{tn})^{2}\n =\\beta_p\\!\\left[(V_{DD}-V_{in}-|V_{tp}|)(V_{DD}-V_{out})\n -\\frac{(V_{DD}-V_{out})^{2}}{2}\\right]$$\n$V_{out}$ falls slowly.\n\n3. Intermediate $V_{in}$: both saturated,\n$V_{in}-V_{tn}\\le V_{out}\\le V_{in}+|V_{tp}|$. $V_{out}$\nfalls very rapidly, and a substantial \"crowbar\" current\nflows from $V_{DD}$ to ground.\n\n4. $V_{in}$ large, $V_{out}$ low: $M_{1}$ in triode, $M_{2}$\nsaturated, the mirror image of 2.\n\n5. $V_{in}>V_{DD}-|V_{tp}|$: $M_{2}$ off, $M_{1}$ in triode\nwith $I_D=0$, $V_{out}=0$.\n\n```\nVout\nVDD |------\\\n    |       \\\n    |        \\     <- very steep, both saturated\n  0 |         ------\n    +-------------- Vin\n              VM\n```\n\n### Switching threshold\n\nDefine $V_M$ by $V_{in}=V_{out}=V_M$. Both devices are in\nsaturation there, so, neglecting $\\lambda$,\n$$\\frac{\\beta_n}{2}(V_M-V_{tn})^2=\n \\frac{\\beta_p}{2}(V_{DD}-V_M-|V_{tp}|)^2$$\n$$\\;V_M=\n\\frac{V_{tn}+r\\,(V_{DD}-|V_{tp}|)}{1+r}\\;,\n\\qquad \nr=\\sqrt{\\frac{\\beta_p}{\\beta_n}}$$\n\nFor $\\beta_n=\\beta_p$ and $V_{tn}=|V_{tp}|$, $V_M=V_{DD}/2$.\nSince $\\mu_n\\approx 2$–$3\\,\\mu_p$, a symmetric inverter\nnormally makes $(W/L)_2\\approx(\\mu_n/\\mu_p)(W/L)_1$, at\nthe cost of area and input capacitance.\n\n$V_{IL}$ and $V_{IH}$ are the $dV_{out}/dV_{in}=-1$ points.\nWith $V_{OL}=0$, $V_{OH}=V_{DD}$,\n$NM_L=V_{IL}-V_{OL}$, $NM_H=V_{OH}-V_{IH}$, both typically\n$\\sim 0.4V_{DD}$, i.e. excellent noise immunity.\n\nBiased at $V_M$ the circuit is also a high-gain inverting\namplifier: both transistors act as common-source devices\nin parallel,\n$$A_v=-(g_{m1}+g_{m2})\\,(r_{o1}\\parallel r_{o2})$$\nwhich explains the steep VTC. Finite $\\lambda$ makes the\nslope finite but large.\n\n### Dynamic behaviour and power\n\nThe output sees a load capacitance $C_L$ (next gate,\nparasitics, wiring). $M_{2}$ charges $C_L$ to $V_{DD}$,\n$M_{1}$ discharges it to ground. To first order,\n$$t_{pHL}\\sim \\frac{C_LV_{DD}}{\\beta_n(V_{DD}-V_{tn})^2},\n\\qquad\nt_{pLH}\\sim \\frac{C_LV_{DD}}{\\beta_p(V_{DD}-|V_{tp}|)^2}$$\nor $t_p\\approx0.69R_{eq}C_L$. Equal rise and fall times\nagain require $\\beta_n\\approx\\beta_p$.\n\nStatic power is $\\approx V_{DD}I_{leak}$ only. On a\n$0\\to1$ output transition $C_LV_{DD}^{2}$ is drawn from\nthe supply, half dissipated in $M_{2}$, half stored on\n$C_L$ and later dissipated in $M_{1}$. For activity\nfactor $\\alpha$ and frequency $f$,\n$$P_{dyn}= \\alpha f C_L V_{DD}^{2}$$\nplus a smaller short-circuit term from the interval in\nregion 3 when both devices conduct.\n\nIn summary: a complementary, rail-to-rail, inverting\nstage with infinite d-c input resistance, low output\nresistance, essentially zero static power, large noise\nmargins, and speed/power dominated by $C_LV_{DD}^{2}f$ —\nthe basic building block of static CMOS logic.",
        "format": "markdown",
        "sha256": "29a379b149e0ed6d218ad8b787ec10a483a8bcff93df1ba05b9daefa36984f1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, and describes the complementary switching and inverting operation. The additional analysis is consistent with the circuit and does not contradict its operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 318,
        "output_tokens": 8284,
        "total_tokens": 8602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 318,
        "output_tokens": 8284,
        "total_tokens": 8602,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the CMOS inverter. $M_{1}$ is an\nNMOS device, its body tied to ground, its source to ground\nand its drain to the output. $M_{2}$ is a PMOS device, its\nbody tied to $V_{DD}$, its source to $V_{DD}$ and its drain\nto the output. The gates are tied together.\n\n$$V_{out}=\\overline{V_{in}}$$\n\nSince the source of each device is tied to its body,\n$V_{BS}=0$ for both devices and there is no body effect.\n\n### Steady state operation\n\nLet $V_{TN}>0$ be the NMOS threshold and $V_{TP}<0$\nthe PMOS threshold.\n\n$V_{in}=0$:\n$$V_{GS1}=0<V_{TN}\\qquad V_{SG2}=V_{DD}>|V_{TP}|$$\n$M_{1}$ is off, $M_{2}$ is on. There is no dc path from\n$V_{DD}$ to ground, and $M_{2}$ pulls the output to\n\n$$V_{out}=V_{DD}\\qquad \\text{logic 1}$$\n\n$V_{in}=V_{DD}$:\n$$V_{GS1}=V_{DD}>V_{TN}\\qquad V_{SG2}=0<|V_{TP}|$$\n$M_{2}$ is off, $M_{1}$ is on. $M_{1}$ pulls the output to\n\n$$V_{out}=0\\qquad \\text{logic 0}$$\n\nHence the output swings rail-to-rail,\n$V_{OH}=V_{DD}$, $V_{OL}=0$. In either steady state one\ntransistor is off, so ideally\n\n$$I_{DD,static}=0,\\qquad P_{static}\\approx 0$$\n\nexcept for leakage. The input draws no dc current,\nthe static output resistance is low, because the\non transistor is in the triode region with $V_{DS}\\approx 0$.\n\n### Voltage transfer characteristic\n\nAs $V_{in}$ is raised from $0$ to $V_{DD}$, five regions occur.\n\n| $V_{in}$ | $M_{1}$ NMOS | $M_{2}$ PMOS | $V_{out}$ |\n|---|---|---|---|\n| $V_{in}<V_{TN}$ | off | triode | $V_{DD}$ |\n| low | saturation | triode | $\\approx V_{DD}$, falling slowly |\n| $V_{in}\\approx V_{M}$ | saturation | saturation | falls steeply |\n| high | triode | saturation | $\\approx 0$, falling slowly |\n| $V_{in}>V_{DD}-|V_{TP}|$ | triode | off | $0$ |\n\nIn the middle region both devices are saturated, so the\nsmall signal voltage gain is large. With both gates driven\nand both drains at the output,\n\n$$A_{v}=-(g_{m1}+g_{m2})\\,(r_{o1}\\parallel r_{o2}) ,\\qquad |A_{v}|\\gg 1$$\n\nso the VTC is very steep around its switching point.\n\n### Switching threshold\n\nDefine $V_{M}$ by $V_{in}=V_{out}=V_{M}$. There both devices\nare saturated and $I_{D1}=I_{D2}$. Neglecting $\\lambda$,\n\n$$\\frac{\\beta_n}{2}(V_{M}-V_{TN})^{2}\n =\\frac{\\beta_p}{2}\\bigl(V_{DD}-V_{M}-|V_{TP}|\\bigr)^{2}$$\n\nwhere $\\beta_{n,p}=\\mu_{n,p}C_{ox}(W/L)_{n,p}$. Hence\n\n$$V_{M}=\n\\frac{V_{TN}+\\sqrt{\\beta_p/\\beta_n}\\,\\bigl(V_{DD}-|V_{TP}|\\bigr)}\n     {1+\\sqrt{\\beta_p/\\beta_n}} .$$\n\nIf $\\beta_n=\\beta_p$ and $V_{TN}=|V_{TP}|$,\n\n$$V_{M}= \\frac{V_{DD}}{2}$$\n\nat the centre of the supply range. Since $\\mu_n\\approx 2$--$3\\,\\mu_p$,\nthis usually requires\n\n$$\\left(\\frac{W}{L}\\right)_p \\approx \\frac{\\mu_n}{\\mu_p}\n\\left(\\frac{W}{L}\\right)_n $$\n\ni.e. the PMOS is made wider than the NMOS. This also\nequalises the rise and fall times.\n\nNoise margins are defined from the points where\n$dV_{out}/dV_{in}=-1$, $V_{IL}$ and $V_{IH}$:\n\n$$NM_L=V_{IL}-V_{OL}=V_{IL},\\qquad \n  NM_H=V_{OH}-V_{IH}=V_{DD}-V_{IH}.$$\n\nFor a balanced inverter they are each close to $V_{DD}/2$,\nso the inverter has excellent noise immunity and restores\nlogic levels at every stage.\n\n### Switching, power and speed\n\nDuring a transition, for $V_{TN}<V_{in}<V_{DD}-|V_{TP}|$,\nboth transistors are on briefly, producing a short\n``crowbar'' current from $V_{DD}$ to ground. This is the\nmain short-circuit power component.\n\nWith a load capacitance $C_L$ at the output, a $0\\to1$\ntransition draws $C_LV_{DD}^{2}$ of energy from the supply,\nhalf stored on $C_L$ and half dissipated in $M_{2}$; the\nstored energy is dissipated in $M_{1}$ on the $1\\to0$\ntransition. For switching activity $\\alpha$ at frequency $f$,\n\n$$P_{dyn}\\approx \\alpha C_L V_{DD}^{2} f .$$\n\nThe propagation delays are approximately set by charging\n$C_L$ through the on resistance of $M_{2}$ and discharging\nit through $M_{1}$:\n\n$$t_{PLH}\\approx 0.69\\,R_{eq,p}C_L,\\qquad\n  t_{PHL}\\approx 0.69\\,R_{eq,n}C_L,$$\n$$t_p=\\frac{t_{PLH}+t_{PHL}}{2}.$$\n\nIn summary, the circuit is a NOT gate with rail-to-rail\nswing, very high input impedance, low static output\nimpedance, essentially zero static power, large noise\nmargins, and speed/power determined mainly by the load\ncapacitance and the transistor sizes.",
        "format": "markdown",
        "sha256": "fd0c2e2a7bada261aadc09d6a5107d53c60512e5c78d3d3ab298af2a212208b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up, and describes the inverting operation. The additional analysis is consistent with the circuit and does not contradict its operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 318,
        "output_tokens": 7026,
        "total_tokens": 7344,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 318,
        "output_tokens": 7026,
        "total_tokens": 7344,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5507,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two devices form the complementary pair of a\nCMOS NOT gate.\n\n$M_{1}$ is n-channel, source and body to ground.\n$M_{2}$ is p-channel, source and body to $V_{DD}$.\nThe two gates are the input, the two drains are the output.\nHence $V_{SB1}=V_{SB2}=0$; there is no body effect in the\nideal analysis.  Put\n\n$$\n \\beta_{n,p}= \\mu_{n,p}C_{ox}\\Bigl({W\\over L}\\Bigr)_{n,p}\\qquad \nV_{Tn}>0,\\;\\;V_{Tp}<0 .\n$$\n\n### Logic operation\n\n* $V_{in}\\approx 0$:  $V_{GS1}=0<V_{Tn}$, $M_{1}$ off;\n$V_{SG2}=V_{DD}>|V_{Tp}|$, $M_{2}$ on. $M_{2}$ pulls the\noutput, and any load capacitance, to $V_{DD}$,\n$$\nV_{out}=V_{DD},\\qquad I_{D}=0 .\n$$\n\n* $V_{in}\\approx V_{DD}$: $M_{2}$ off, $M_{1}$ on. $M_{1}$ pulls\nthe output to ground,\n$$\nV_{out}=0,\\qquad I_{D}=0 .\n$$\n\ni.e. in the logic sense\n\n$$\nV_{out}=\\overline{V_{in}},\\qquad \n\\begin{array}{c|c} V_{in}&V_{out}\\\\ \\hline 0&V_{DD}\\\\ V_{DD}&0\\end{array}\n$$\n\nrail to rail swing, essentially no static current,\nand, the gates being insulated, essentially no d-c\ninput current.  Static power is, apart from leakage, zero.\n\n### Voltage transfer characteristic\n\nFor $0<V_{in}<V_{DD}$ the drain currents must be equal,\n$I_{D1}=I_{D2}$, the series current from $V_{DD}$ to ground.\nIn the long channel approximation, $\\lambda =0$ except\nwhere noted,\n\n1. $V_{in}<V_{Tn}$: $M_{1}$ off, $M_{2}$ in triode with\n$I_{D2}\\approx0$, $V_{out}=V_{DD}$.\n\n2. $V_{Tn}<V_{in}\\lesssim V_{M}$: $M_{1}$ saturated,\n$M_{2}$ in triode,\n$${\\beta_n\\over2}(V_{in}-V_{Tn})^2=\n\\beta_p\\Bigl[(V_{DD}-V_{in}-|V_{Tp}|)(V_{DD}-V_{out})\n-{(V_{DD}-V_{out})^{2}\\over2}\\Bigr]$$\n$V_{out}$ stays close to $V_{DD}$.\n\n3. $V_{in}\\approx V_{M}$: both devices saturated.\n$V_{out}$ falls very rapidly with $V_{in}$.\n\n4. $V_{in}\\gtrsim V_{M}$: $M_{1}$ in triode, $M_{2}$ saturated,\n$V_{out}$ close to $0$.\n\n5. $V_{in}>V_{DD}-|V_{Tp}|$: $M_{2}$ off, $M_{1}$ in triode\nwith $I_{D1}\\approx0$, $V_{out}=0$.\n\n$M$, the switching threshold, defined by $V_{in}=V_{out}=V_M$\nwith both devices saturated, follows from $I_{D1}=I_{D2}$:\n\n$$\n\\sqrt{\\beta_n}\\,(V_M-V_{Tn})=\n\\sqrt{\\beta_p}\\,\\bigl(V_{DD}-V_M-|V_{Tp}|\\bigr)\n$$\n\n$$\n\\,V_M=\n{V_{Tn}+r\\,(V_{DD}-|V_{Tp}|)\\over 1+r}\\,,\\qquad \nr=\\sqrt{\\beta_p/\\beta_n}\\;  .\n$$\n\nFor $\\beta_n=\\beta_p$ and $V_{Tn}=|V_{Tp}|$, $V_M=V_{DD}/2$,\nthe VTC is symmetric and the (ideal) noise margins are\n$\\approx V_{DD}/2$.  Since $\\mu_n\\approx2\\!-\\!3\\,\\mu_p$,\n$\\beta_n=\\beta_p$ normally requires\n$(W/L)_p\\approx2\\!-\\!3\\,(W/L)_n$.\nIncreasing $\\beta_p/\\beta_n$ moves $V_M$ up, and vice versa.\n\nBiased at $V_M$ the circuit is a high gain amplifier.\nBoth transconductances aid,\n\n$$\nA_v=\\left.{{dV_{out}}\\over{dV_{in}}}\\right|_{V_M}\n=-(g_{m1}+g_{m2})\\,(r_{o1}\\parallel r_{o2})\n=-{(g_{m1}+g_{m2})\\over I_D(\\lambda_n+\\lambda_p)}\\;,\n$$\n\nlarge in magnitude; with $\\lambda\\to0$ the transition\nin 3. becomes vertical.  The current through the pair\nis zero at the two logic levels and peaks near $V_M$,\nthe familiar short-circuit current during switching.\n\n### Dynamic behaviour\n\n$M_1$ discharges a load $C_L$ to ground and $M_2$ charges\nit to $V_{DD}$, with on resistances roughly\n$R_n\\approx[\\beta_n(V_{DD}-V_{Tn})]^{-1}$,\n$R_p\\approx[\\beta_p(V_{DD}-|V_{Tp}|)]^{-1}$. Hence,\nto first order,\n\n$$\nt_{pHL}\\approx0.69\\,R_nC_L,\\qquad \nt_{pLH}\\approx0.69\\,R_pC_L .\n$$\n\nThe d-c input resistance is infinite; the input\ncapacitance is essentially $C_{ox}(W_1L_1+W_2L_2)$.\nThe output resistance in a logic state is the $R_{on}$\nof the device that is on.  Mean power at switching\nfrequency $f$ with activity $\\alpha$ is dominated by\n\n$$\nP \\approx \\alpha C_LV_{DD}^{2}f\n$$\n\nplus a small short-circuit term.  In short: a rail-to-rail,\nhigh-noise-margin, essentially zero-static-power inverter,\nthe basic CMOS logic gate, and, biased at $V_M$, a\nhigh-gain inverting amplifier.",
        "format": "markdown",
        "sha256": "f3f99394742a87df364ea9f8e43eb3ada89316215daf8591cc110fa9e5100944"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with an NMOS pull-down and PMOS pull-up, and describes its operation consistently. The golden solution’s full-credit rule applies; the added analysis does not introduce a contradiction.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 318,
        "output_tokens": 8458,
        "total_tokens": 8776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 318,
        "output_tokens": 8458,
        "total_tokens": 8776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is not, at first sight, what it looks like.\nIt looks like a complementary inverter, but look at the\nterminals which carry the arrow, i.e. at the sources.\n\n* $M_{1}$ : drain to $V_{DD}$, source to the output node.\n  The arrow is at the output side.  $M_{1}$ is $n$--channel.\n* $M_{2}$ : source to the output node, drain to ground.\n  The arrow is at the output side, reversed. $M_{2}$ is\n  $p$--channel.\n\nThe drains go to the supplies and the sources meet at\n$V_{out}$.  The gates are in common.  It is the complementary\ncommon drain, i.e. push-pull source follower, the MOS\nclass-B output stage.  It is in phase with the input, it\nhas no voltage gain, and it cannot swing to the rails.\n\nLet $V_{TN}>0$, $V_{TP}<0$, $|V_{TP}|$ for the $p$ device.\nIn a monolithic version the $n$ body is to ground and the\n$p$ body is to $V_{DD}$, so in general $V_{TN}$ and\n$|V_{TP}| $ are $V_{out}$ dependent through the body effect.\nTo first order take them constant.\n\n### Large signal behaviour\n\nThe current in $M_{1}$ flows $V_{DD}\\to V_{out}$, the\ncurrent in $M_{2}$ flows $V_{out}\\to {\\rm GND}$.  With no\nd-c load current the (first order) d-c current in a device\nthat is on must go to zero.\n\n$M_{1}$ on, $M_{2}$ off.\n$M_{2}$ is off for\n$$V_{SG2}=V_{out}-V_{in}<|V_{TP}|\\;.$$\n$M_{1}$ is a source follower.  With $I_{D1}\\approx0$\n\n$$V_{GS1}\\approx V_{TN},\\qquad \nV_{out}\\approx V_{in}-V_{TN}(V_{out})\\qquad {\\rm upper\\;branch}$$\n\n$M_{1}$ supplies any load current that flows out of the\noutput node,\n$V_{out}=V_{in}-V_{TN}-\\sqrt{2I_{L}/\\beta_{n1}}$ to second\norder.  $M_{1}$ is in saturation for $V_{in}\\lesssim V_{DD}$.\n\n$M_{2}$ on, $M_{1}$ off.\n$M_{1}$ is off for\n$$V_{GS1}=V_{in}-V_{out}<V_{TN}\\;.$$\n$M_{2}$ is a $p$ source follower pulling the output down.\nWith $I_{D2}\\approx0$\n\n$$V_{SG2}\\approx |V_{TP}|,\\qquad \nV_{out}\\approx V_{in}+|V_{TP}(V_{out})|\\qquad{\\rm lower\\;branch}$$\n\n$M_{2}$ sinks any load current that flows into the output\nnode. \n\nBoth off.  Both are off for\n\n$$V_{in}-V_{TN}\\;<\\;V_{out}\\;<\\;V_{in}+|V_{TP}|\\;.$$\n\nIn that window no device drives the output.  With a\ncapacitive load $V_{out}$ simply stays where it was.\nOn a slow sweep the $V_{out}(V_{in})$ characteristic follows\nthe lower branch up, stays essentially constant over a\ndead band of about\n\n$$\\Delta V\\;\\approx\\;V_{TN}+|V_{TP}|$$\n\nin $V_{in}-V_{out}$, and then follows the upper branch.\nThis is the familiar class-B cross-over distortion.\nBody effect, $V_{TN}=V_{TN}(V_{out})$, \n$|V_{TP}|=|V_{TP}(V_{out})|$, widens the dead band and\nmakes the shift $V_{in}-V_{out}$ grow toward the rails.\n\nIn particular even with no load\n\n$$\\begin{aligned}\nV_{in}=V_{DD}&:&V_{out,\\max}&\\approx V_{DD}-V_{TN,eff}<V_{DD}\\\\\nV_{in}=0&:&V_{out,\\min}&\\approx |V_{TP,eff}|>0\n\\end{aligned}$$\n\nno full rail-to-rail swing, no inversion, and no\n$\\gg1$ voltage gain to make a logic threshold.  It is\nuseless as a NOT gate.\n\n### Small signal behaviour\n\nBias, say, on the upper branch, $M_{2}$ off.  It is the\nordinary source follower\n\n$$ \nA_{v}=\\frac{v_{out}}{v_{in}}=\n\\frac{g_{m1}}{g_{m1}+g_{mb1}+g_{ds1}+G_{L}}\\;<\\;1,\n\\qquad \nR_{out}\\approx\\frac{1}{\\,g_{m1}+g_{mb1}+g_{ds1}\\,}\\;\\Big\\|\\;R_{L},\n\\qquad R_{in}\\approx\\infty \n$$\n\nwith $g_{mb1}=0$ if the body is tied to the source.\nOn the lower branch the same formulas hold with\n$M_{2}$ in place of $M_{1}$.  Close to the cross-over\nboth $g_{m}$'s can appear in parallel,\n$A_{v}\\approx (g_{m1}+g_{m2})/\n(g_{m1}+g_{mb1}+g_{m2}+g_{mb2}+g_{ds1}+g_{ds2}+G_{L})$,\nstill $<1$.\n\nThe quiescent current with a common gate is essentially\nzero - class B.  Supply current is drawn, by $M_{1}$ from\n$V_{DD}$ on positive demand and by $M_{2}$ to ground on\nnegative demand, essentially only to supply the load.\n\nIn short: a non-inverting buffer of voltage gain\nslightly less than unity, low output resistance, very\nhigh input resistance, reduced output swing\n$|V_{TP}|\\lesssim V_{out}\\lesssim V_{DD}-V_{TN}$, and a\n$V_{TN}+|V_{TP}|$ dead zone about cross-over.  It is used\nas a power output / load driving stage, with cross-over\ndistortion unless separately biased into class AB,\nnot as an inverter.",
        "format": "markdown",
        "sha256": "65c942c60443bb8d2bb31f669cfced06ab9e5aa040d2679077058542aa2e0472"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2 as p-channel and analyzes the circuit as a complementary push-pull stage. The golden solution requires recognizing both devices as NMOS; this topology error triggers the zero-score rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 60608,
        "total_tokens": 60892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 59029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 60608,
        "total_tokens": 60892,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 59029,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors are NMOS. The arrow is on the\nsource, at the bottom of both devices. $M_{1}$ is a source\nfollower, drain to $V_{DD}$, source to $V_{out}$, and $M_{2}$ is\na device from $V_{out}$ to ground whose gate is not a fixed\nbias but the input itself. It is not a CMOS inverter, and it\nis not inverting.\n\nLet, to first order, $\\lambda =\\gamma =0$,\n$\\beta_i=\\mu_nC_{ox}(W/L)_i$, a common $V_T$, and no d-c load\nat the output, so that $I_{D1}=I_{D2}$.\n\n### Large signal behaviour\n\nFor $V_{in}<V_T$ both devices are off in the square law model.\n$V_{out}$ is then undefined - a capacitive output simply holds\nits charge, in practice leaking slowly to $\\approx 0$ through\n$M_{2}$.\n\nFor $V_{in}>V_T$ both are on. $M_{1}$ can be on only for\n\n$$\nV_{GS1}=V_{in}-V_{out}>V_T\\qquad\\Longleftrightarrow\\qquad \nV_{out}<V_{in}-V_T .\n$$\n\nHence for $M_{2}$\n\n$$\nV_{DS2}=V_{out}<V_{in}-V_T=V_{GS2}-V_T ,\n$$\n\ni.e. $M_{2}$ is in the triode region. The assumption that both\nare saturated is self-contradictory. For $M_{1}$, with\n$V_{in}\\le V_{DD}$,\n\n$$\nV_{DS1}=V_{DD}-V_{out}\\ge V_{GS1}-V_T\n\\iff V_{DD}\\ge V_{in}-V_T ,\n$$\n\nso $M_{1}$ is in saturation. Thus: $M_{1}$ saturated source\nfollower, $M_{2}$ triode pull-down, in series. There is a\nstatic $V_{DD}$-to-ground current for $V_{in}>V_T$.\n\nEquating currents,\n$$\n\\frac12\\beta_1\\big(V_{in}-V_{out}-V_T\\big)^2\n=\n\\beta_2\\Big[(V_{in}-V_T)V_{out}-\\frac{V_{out}^{2}}2\\Big].\n$$\nPut $x=V_{in}-V_T$, $y=V_{out}$. The equation reduces to\n$(\\beta_1+\\beta_2)(x-y)^2=\\beta_2x^2$, whence\n\n$$\n\\,V_{out}=(V_{in}-V_T)\n\\left[\\,1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\,\\right]\\,,\\qquad V_{in}>V_T .\n$$\n\nTo first order the transfer curve is a straight line of slope\n$<1$, offset by $V_T$. The common current and static power are\n\n$$\nI_D=\\frac12\\,\\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}\\,(V_{in}-V_T)^2,\n\\qquad P\\simeq V_{DD}I_D .\n$$\n\nIn particular\n$$\nV_{out,max}\\approx \n\\left[1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\right](V_{DD}-V_T)<V_{DD}-V_T ,\n$$\nso the output is neither rail-to-rail nor able to reach\n$V_{DD}$. In an integrated version $M_{1}$ has $V_{SB}=V_{out}$,\nso its $V_T$ is raised by body effect and the result is\ncompressed and somewhat nonlinear; $M_{2}$ has $V_{SB}=0$.\n\n### Small signal gain\n\nThe subtlety is that $M_{2}$ is in triode. Its incremental\nparameters at the bias point are not the saturation values, but\n\n$$\ng_{m2}^{(tr)}=\\left.\\frac{\\partial I_{D2}}{\\partial V_{GS}}\\right|_{V_{DS}}\n=\\beta_2V_{out},\\qquad\ng_{ds2}=\\beta_2\\big(V_{in}-V_T-V_{out}\\big),\n$$\nwhile\n$$\ng_{m1}=\\beta_1\\big(V_{in}-V_{out}-V_T\\big),\\qquad \ng_{ds1}=\\lambda_1 I_D .\n$$\n\nKCL at the output, including body effect of $M_{1}$ ($g_{mb1}$),\n$$\ng_{m1}(v_{in}-v_{out})-g_{mb1}v_{out}-g_{ds1}v_{out}\n= g_{m2}^{(tr)}v_{in}+g_{ds2}v_{out},\n$$\ngives\n\n$$\nA_v=\\frac{v_{out}}{v_{in}}\n=\\frac{\\,g_{m1}-g_{m2}^{(tr)}\\,}\n       {\\,g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}\\,}>0 .\n$$\n\nThe $-g_{m2}^{(tr)}$ term is the physics of the circuit: a rise\nin $V_{in}$ turns $M_{1}$ on harder, pushing $V_{out}$ up, but\nsimultaneously turns the triode pull-down $M_{2}$ on harder,\npulling $V_{out}$ down. The two actions partly cancel.\n\nWith $\\lambda=\\gamma=0$ this reduces to the slope of the\nlarge-signal curve,\n\n$$\nA_v = 1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\n     = 1-\\frac{1}{\\sqrt{1+\\beta_1/\\beta_2}}\\;<\\;1 .\n$$\n\nFor $(W/L)_1=(W/L)_2$, $A_v=1-1/\\sqrt2\\approx0.29$. $A_v\\to1$\nonly for $\\beta_1\\gg\\beta_2$, and $A_v\\to0$ for $\\beta_1\\ll\\beta_2$.\nBody effect and $\\lambda$ lower it further.\n\nThe (low) resistance at the output, with $v_{in}=0$, is that of\na source follower in parallel with the triode resistance of\n$M_2$,\n$$\nR_{out}=\\frac{1}{g_{m1}+g_{mb1}+g_{ds1}+g_{ds2}},\n$$\nthe input resistance is essentially the gate capacitance of\n$M_1+M_2$, and the dominant pole with load $C_L$ is\n$\\approx (g_{m1}+g_{mb1}+g_{ds1}+g_{ds2})/C_L$.\n\nIn short, it is a non-inverting, gain-less-than-unity buffer:\na saturated source follower loaded by an input-controlled\ntriode NMOS. It suffers a $V_T$ drop, ratio-dependent gain,\nstatic power dissipation for $V_{in}>V_T$, an undefined low\nstate, and is a poor substitute for either a CMOS inverter or\na properly biased source follower.",
        "format": "markdown",
        "sha256": "93651c146fbb8faae86509d3eeb39e7c278b29250d3bf5561afbd1b7ba663db2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper source-follower and lower pull-down actions, and concludes the circuit is not a normal CMOS inverter, satisfying the full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 12073,
        "total_tokens": 12357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 12073,
        "total_tokens": 12357,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10365,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both devices are NMOS. The body terminal of each is\ntied to the lower terminal, i.e. to its source, so that\nthere is no body effect in the idealised schematic.\n\n$$\\begin{array}{lll}\nM_{1}:& D=V_{DD},& G=V_{in},\\qquad S=V_{out}\\\\\nM_{2}:& D=V_{out},& G=V_{in},\\qquad S=0\n\\end{array}\\qquad \n\\begin{aligned}\nV_{GS1}&=V_{in}-V_{out}, & V_{DS1}&=V_{DD}-V_{out}\\\\\nV_{GS2}&=V_{in}, & V_{DS2}&=V_{out}\n\\end{aligned}$$\n\nIt looks like a CMOS inverter, but the two transistors\nturn on and turn off together.  Let $\\beta_i=\\mu_nC_{ox}(W/L)_i$\nand $V_t$ be common, $\\lambda=0$, and let the output be\nunloaded except for a capacitance.  In dc\n\n$$I_{D1}=I_{D2}\\equiv I_D\\tag{1}$$\n\n### 1.  $V_{in}<V_t$: no dc output\n\nBoth transistors are off in the square law model,\n$I_D=0$, and $V_{out}$ is a high impedance node.  A charge\npreviously stored on the load capacitance is simply held,\nand in practice leaks away, essentially through the\nsubthreshold current of $M_2$ to ground.  There is no\nactively driven state for low input.\n\n### 2.  $V_{in}>V_t$: $M_1$ saturated, $M_2$ in triode\n\nFor $V_{in}\\le V_{DD}$\n\n$$V_{DS1}-(V_{GS1}-V_t)=V_{DD}-V_{in}+V_t>0$$\n\nso $M_1$, when on, is saturated.\n$M_2$ cannot be saturated in steady state: saturation\nwould require $V_{out}\\ge V_{in}-V_t$, i.e. $V_{GS1}\\le V_t$,\nso $I_{D1}=0$.\n\nHence from (1)\n\n$$ \\frac{\\beta_1}{2}\\bigl(V_{in}-V_{out}-V_t\\bigr)^2\n      =\\beta_2\\Bigl[(V_{in}-V_t)V_{out}-\\frac{V_{out}^{2}}{2}\\Bigr]\n      \\qquad V_{in}>V_t \\tag{2}$$\n\nPut $u=V_{in}-V_t$, $v=V_{out}$.  (2) is\n$\\beta_1(u-v)^2=\\beta_2\\bigl[u^{2}-(u-v)^2\\bigr]$, whence\n\n$$\\,u-v=u\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\,$$\n\n$$\\;V_{out}= \n\\Biggl[1-\\sqrt{\\frac{\\beta_2}{\\beta_1+\\beta_2}}\\;\\Biggr]\n\\bigl(V_{in}-V_t\\bigr)\\equiv c\\,(V_{in}-V_t),\\qquad \n0<c<1\\; \\tag{3}$$\n\ni.e. the (ideal) transfer characteristic for $V_{in}>V_t$\nis a straight line of slope $c<1$ starting at $(V_t,0)$.\n$M_1$ is a source follower and $M_2$, in the triode region,\nis a gate controlled non-linear resistor to ground; the\noutput is the ratioed division between them.  In small\nsignal form, $\\lambda$ included,\n\n$$ \\frac{v_{out}}{v_{in}}=\n\\frac{g_{m1}-g_{m2}}{g_{m1}+g_{ds1}+g_{ds2}},\\qquad\nR_{out}\\approx\\frac1{g_{m1}+g_{ds1}+g_{ds2}} ,$$\nwhich reduces to $c$ for $\\lambda=0$.\n\nFor identical transistors $c=1-1/\\sqrt2\\approx0.29$.\nE.g. $V_{DD}=V_{in}=5\\,{\\rm V}$, $V_t=1\\,{\\rm V}$ gives\n$V_{out}\\approx1.2\\,{\\rm V}$, neither a good ``1'' nor\na good ``0''.  In general the largest attainable output,\nat $V_{in}=V_{DD}$, is only\n\n$$V_{out,max}=c\\,(V_{DD}-V_t)<V_{DD}-V_t .$$\n\nMaking $\\beta_2\\gg\\beta_1$ makes $c$ small, $V_{out}$ lower\nfor high $V_{in}$, at the expense of ratioed operation;\nmaking $\\beta_1\\gg\\beta_2$ makes $c\\to1$, $V_{out}\\approx\nV_{in}-V_t$, a poor source follower.\n\nWhenever $V_{in}>V_t$ a dc current flows from $V_{DD}$\nto ground,\n\n$$I_D=\\frac{\\beta_1}{2}\\bigl(V_{in}-V_{out}-V_t\\bigr)^2\n     =\\frac{\\beta_1}{2}(V_{in}-V_t)^2\\,\n       \\frac{\\beta_2}{\\beta_1+\\beta_2},\\qquad \nP_{stat}=V_{DD}I_D\\neq0,$$\n\neven with no load.  Transitorily, if $V_{out}$ starts\nabove the value (3), $M_1$ is off and $M_2$ discharges\n$C_L$ until (3) is reached; if it starts below, $M_1$\ncharges $C_L$ up to (3).\n\n### Conclusion\n\nThe circuit is not an inverter at all.  It is\nnon-inverting, with voltage gain $c<1$, no rail-to-rail\nswing, a floating output for $V_{in}<V_t$, a level that\ndepends on $\\beta_1/\\beta_2$, and static power\ndissipation for $V_{in}>V_t$.  It is merely an NMOS\nsource follower $M_1$ loaded by a triode NMOS $M_2$\nwhose gate is tied, unfortunately, to the same input.",
        "format": "markdown",
        "sha256": "a0edc2e12094b2bf59dbb4d48968471a717c2c0d050eb1ab0a0b2a4da4ca311a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as NMOS, describes the upper device as a source follower and the lower as a pull-down, and concludes this is not a normal CMOS inverter.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 26064,
        "total_tokens": 26348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 26064,
        "total_tokens": 26348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24544,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The upper device is a pMOS with its bulk tied to its\nsource, $V_{DD}$, and the lower device is an nMOS with its\nbulk tied to its source, ground. There is no body effect.\n$M_{1}$ is the driver, $M_{2}$ is connected gate-to-drain,\ni.e. as a diode, between $V_{DD}$ and the output. In the\nd-c steady state, with no d-c load,\n\n$$ I_{D1}=I_{D2}\\equiv I_D $$\n\nLet\n$$ \\beta_1=\\mu_nC_{ox}\\Bigl({W\\over L}\\Bigr)_1 ,\\qquad \n   \\beta_2=\\mu_pC_{ox}\\Bigl({W\\over L}\\Bigr)_2 $$\nand neglect $\\lambda$ at first.\n\nFor $M_{2}$\n\n$$ V_{SG2}=V_{DD}-V_{G2}=V_{DD}-V_{out}=V_{SD2} .$$\n\nHence, when it is on,\n$V_{SD2}=V_{SG2}>V_{SG2}-|V_{TP}|$; a gate-drain connected\ndevice is always in saturation (or off). Its current is\n\n$$ I_D={\\beta_2\\over 2}\n        \\bigl(V_{DD}-V_{out}-|V_{TP}|\\bigr)^{2}\\qquad M_{2}\\;{\\rm sat} \\tag{1}$$\n\nFor $M_1$, $V_{GS1}=V_{in}$, $V_{DS1}=V_{out}$.\n\n### Voltage transfer characteristic\n\n1. $V_{in}<V_{TN}$ : $M_1$ off. \n\n$I_D=0$. $M_2$ charges the output capacitance up until it\nitself turns off, $V_{SG2}=|V_{TP}|$, i.e.\n\n$$ V_{out,max}=V_{DD}-|V_{TP}| $$\n\nThe high output level is degraded by a pMOS threshold.\n\n2. $V_{in}>V_{TN}$, $M_1$ saturated.\n\n$$ I_D={\\beta_1\\over 2}\\bigl(V_{in}-V_{TN}\\bigr)^{2}\n     ={\\beta_2\\over 2}\\bigl(V_{DD}-V_{out}-|V_{TP}|\\bigr)^{2} \\tag{2}$$\n\nwhence, with \n$$ S\\equiv\\sqrt{\\beta_1\\over \\beta_2}\n      =\\sqrt{\\,{\\mu_n (W/L)_1\\over \\mu_p (W/L)_2}} $$\n\n$$\\,V_{out}=V_{DD}-|V_{TP}|-S\\,\\bigl(V_{in}-V_{TN}\\bigr)\\, \\tag{3}$$\n\na straight line of slope $-S$. This is the useful\namplifying region. $M_1$ saturation, $V_{out}\\ge V_{in}-V_{TN}$,\nrequires\n\n$$ V_{in}\\le V_{TN}+\n      {V_{DD}-|V_{TP}|-V_{TN}\\over 1+S}\\; . $$\n\nThe ``switching'' voltage $V_{in}=V_{out}=V_M$ from (3) is\n\n$$ V_M={V_{DD}-|V_{TP}|+S V_{TN}\\over 1+S} $$\n\ntending to $V_{TN}$ for $S\\gg1$ and to $V_{DD}-|V_{TP}|$ for\n$S\\ll1$. It is a ratioed circuit.\n\n3. Large $V_{in}$ : $M_1$ in triode, $M_2$ still saturated.\n\n$$ \\beta_1\\Bigl[(V_{in}-V_{TN})V_{out}-{V_{out}^{2}\\over2}\\Bigr]\n   ={\\beta_2\\over2}\\bigl(V_{DD}-V_{out}-|V_{TP}|\\bigr)^{2} \\tag{4}$$\n\n$V_{out}$ falls slowly toward a non-zero $V_{OL}$. For\n$V_{in}=V_{DD}$, $V_{OL}\\ll V_{DD}$,\n\n$$V_{OL}\\approx \n{\\beta_2\\over2\\beta_1}\\,\n{(V_{DD}-|V_{TP}|)^{2}\\over V_{DD}-V_{TN}}\\; ,$$\n\nsmall only for $\\beta_1\\gg\\beta_2$. There is static current,\n$P\\approx V_{DD}I_D$, whenever $V_{in}>V_{TN}$. \n\nThus as a logic gate it is an inverter with reduced swing\n$V_{OL}$ to $V_{DD}-|V_{TP}|$, static power dissipation and\nlevels set by the $\\beta_1/\\beta_2$ ratio - much inferior to a\ncomplementary CMOS inverter. It needs $V_{DD}>V_{TN}+|V_{TP}|$\nto operate at all.\n\n### Small signal behaviour\n\nBias in region 2. At the output node, $M_2$ with\n$v_g=v_d=v_{out}$, $v_s=0$ a-c, presents the diode impedance,\nwith $\\lambda$ restored,\n\n$$ R_{2}={1\\over g_{m2}+g_{ds2}}\\approx{1\\over g_{m2}}\\qquad \n\\bigl(g_{mb2}=0\\bigr) $$\n\nin parallel with $r_{o1}$ of $M_1$. Hence\n\n$$ R_{out}=r_{o1}\\;\\Big\\|\\;{1\\over g_{m2}+g_{ds2}}\n        \\approx {1\\over g_{m2}} $$\n\nand from KCL at the output, $g_{m1}v_{in}+(g_{m2}+g_{ds1}+\ng_{ds2})v_{out}=0$,\n\n$$ A_v\\equiv{v_{out}\\over v_{in}}\n     =-\\,{g_{m1}\\over g_{m2}+g_{ds1}+g_{ds2}}\n     =-g_{m1}\\bigl(r_{o1}\\|r_{o2}\\|1/g_{m2}\\bigr)\n     \\;\\approx\\;-\\,{g_{m1}\\over g_{m2}}  $$\n\nSince the same $I_D$ flows in the two devices,\n$g_m=\\sqrt{\\beta I_D}$ (up to constants), so to first order\n\n$$ |A_v|\\approx\\sqrt{\\beta_1\\over\\beta_2}\n   =\\sqrt{{\\mu_n (W/L)_1\\over \\mu_p (W/L)_2}}\\;, $$\n\nset by geometry, essentially independent of bias current\nand of $V_{DD}$. The input resistance is (ideally) infinite.\n\nLarge $|A_v|$ demands $(W/L)_1\\gg (W/L)_2$; e.g. $|A_v|=10$\nneeds a $\\beta$ ratio of $100$, $\\mu_n/\\mu_p\\approx2$--$3$\nnotwithstanding. Gains of a few to $\\sim10$ are typical.\nThe dominant pole at the output is\n$\\omega_p\\approx (g_{m2})/C_{L,tot}$, i.e. the low diode\nresistance gives a comparatively wide bandwidth for the\ngain obtained, at the expense of limited output swing:\n$V_{out}$ cannot exceed $V_{DD}-|V_{TP}|$ and cannot fall\nbelow the $M_1$ saturation edge $V_{in}-V_{TN}$ in linear\noperation. In short, a common-source nMOS stage with a\ndiode-connected pMOS active load, usable as a low-gain,\ngeometry-controlled amplifier stage.",
        "format": "markdown",
        "sha256": "3c8c83633205303e3ce8b3f222377c11c9aada4f95a741d78b84b49b8a3a0624"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including channel-length modulation for both devices.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 731,
        "output_tokens": 8754,
        "total_tokens": 9485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 731,
        "output_tokens": 8754,
        "total_tokens": 9485,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6929,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a common-source stage $M_{1}$ with a\ndiode-connected pMOS active load $M_{2}$.\n\n$M_{1}$ is nMOS, source and body to ground, gate $=V_{in}$,\ndrain $=V_{out}$. $M_{2}$ is pMOS, source and body to $V_{DD}$,\ndrain $=V_{out}$, and gate tied to its own drain. Hence\n\n$$V_{BS1}=V_{BS2}=0$$\n\nso there is no body effect in either device. No dc gate\ncurrent flows, so, with no external dc load,\n\n$$I_{D1}=I_{D2}\\equiv I_D $$\n\nand $R_{in}=\\infty$ at low frequencies.\n\n### The load device\n\nFor $M_{2}$, gate $=$ drain, so\n\n$$V_{SD2}=V_{DD}-V_{out}=V_{SG2}$$\n\nThe saturation condition for a pMOS,\n$V_{SD}\\ge V_{SG}-|V_{tp}|$, is therefore always satisfied\nwhen $M_{2}$ is on. A gate-drain tied transistor is always\nin saturation, and acts as a non-linear resistor whose\nsmall-signal resistance, looking into its drain with its\nsource at ac ground, is\n\n$$ R_{2}= \\frac{1}{g_{m2}+g_{mb2}+g_{ds2}}\n      =\\frac{1}{g_{m2}+g_{ds2}}\\approx\\frac1{g_{m2}} $$\n\nsince $g_{mb2}=0$. Looking into the output node, $M_{2}$\nconducts more when $V_{out}$ falls and less when $V_{out}$\nrises: it is local shunt feedback at the output.\n\n### DC transfer characteristic\n\nNeglect $\\lambda$ for the large-signal characteristic,\n$\\beta_n=\\mu_nC_{ox}(W/L)_1$, $\\beta_p=\\mu_pC_{ox}(W/L)_2$.\n\n$M_2$ in saturation:\n$$ I_D=\\frac{\\beta_p}{2}\\,\n\\bigl(V_{DD}-V_{out}-|V_{tp}|\\bigr)^{2}\\qquad \nV_{out}<V_{DD}-|V_{tp}|  \\tag{1}$$\n\n1. $V_{in}<V_{tn}$: $M_1$ off, $I_D\\approx0$.  $M_2$ charges\n$V_{out}$ up until it turns off,\n$$V_{out,max}\\approx V_{DD}-|V_{tp}|$$\nnot $V_{DD}$. The output is not rail-to-rail.\n\n2. $M_1$ and $M_2$ in saturation: $V_{out}\\ge V_{in}-V_{tn}$,\n$$ \\frac{\\beta_n}{2}(V_{in}-V_{tn})^{2}\n   =\\frac{\\beta_p}{2}\\bigl(V_{DD}-V_{out}-|V_{tp}|\\bigr)^{2} $$\ni.e.\n$$\\,V_{out}=V_{DD}-|V_{tp}|\n      -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\;(V_{in}-V_{tn})\\,  \\tag{2}$$\nRemarkably, in ideal square law the $V_{out}$-$V_{in}$\ncharacteristic is *linear* in this region, although $I_D$\nis quadratic in $V_{in}$.\n\n3. Large $V_{in}$: $V_{out}$ falls to $V_{in}-V_{tn}$ and\n$M_1$ enters the triode region, $M_2$ remaining saturated:\n$$ \\beta_n\\!\\left[(V_{in}-V_{tn})V_{out}-\\tfrac12V_{out}^{2}\\right]\n =\\frac{\\beta_p}{2}\\bigl(V_{DD}-V_{out}-|V_{tp}|\\bigr)^{2} $$\n$V_{out}$ bends over toward $0$, never quite reaching it\nfor finite $V_{in}$, and $|dV_{out}/dV_{in}|$ collapses.\nUsed as a logic inverter it therefore has poor noise\nmargins and dissipates static power for $V_{out}$ low.\n\nFor amplifier use, $V_{in}$ is biased at a $Q$-point in\nregion 2.\n\n### Small-signal gain and output resistance\n\nSmall signal, $M_1$ is a $g_{m1}v_{in}$ source in parallel\nwith $r_{o1}$ from $V_{out}$ to ground; $M_2$ is\n$1/g_{m2}\\parallel r_{o2}$ from $V_{out}$ to $V_{DD}$ (ac ground).\nHence\n\n$$ R_{out}=r_{o1}\\parallel r_{o2}\\parallel\\frac1{g_{m2}}\n        \\approx \\frac1{g_{m2}}\\quad\\text{usually} $$\n\n$$ A_v=\\frac{v_{out}}{v_{in}}=\n -\\,g_{m1}R_{out}\n =-\\,\\frac{g_{m1}}{\\,g_{m2}+g_{ds1}+g_{ds2}\\,}\n \\;\\xrightarrow[\\lambda\\to0]{}\\;-\\frac{g_{m1}}{g_{m2}} $$\n\nSince $M_1$ and $M_2$ carry the same bias current, in\nsquare law\n\n$$ A_v\\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\n      =-\\frac{V_{ov2}}{V_{ov1}}  $$\n\nThe gain is set essentially by a device-geometry ratio,\nis to first order independent of $I_D$ and $V_{DD}$, and\nis modest in practice — obtaining $|A_v|>10$ requires a\nvery large $(W/L)_1/(W/L)_2$, especially as $\\mu_n\\approx\n2\\!-\\!3\\,\\mu_p$. $\\lambda\\neq0$ makes $|A_v|$ somewhat\nsmaller and bias dependent.\n\n### Consequences\n\n* **Bandwidth:** $R_{out}\\approx1/g_{m2}$ is low, so the\noutput pole $1/(R_{out}C_{L,eff})$ is high; gain is traded\nfor bandwidth, with $GBW\\approx g_{m1}/2\\pi C_L$.\n$C_{L,eff}$ includes $C_{db1},C_{db2},C_{gs2}$ and the next stage.\n* **Linearity:** good in saturation, by (2), apart from\n$\\lambda$, mobility degradation and the triode knee.\n* **Swing:** limited above by $V_{DD}-|V_{tp}|$ and below\nby $M_1$ entering triode, $V_{out}\\gtrsim V_{in}-V_{tn}$.\n* **PSRR:** poor. With $I_D$ fixed by $M_1$, $V_{SG2}$ is\nfixed, so $V_{out}\\approx V_{DD}-V_{SG2}$ follows $V_{DD}$\nalmost 1:1.\n* **Power:** $P=V_{DD}I_{DQ}$ at the bias point,\n$I_{DQ}=\\tfrac{\\beta_n}{2}(V_{inQ}-V_{tn})^2$; zero\n(ideal) when $M_1$ is off.\n\nIn short: a low-to-moderate gain, wideband, fairly linear\nintegrated gain stage that needs no resistor, at the price\nof limited output swing, limited gain, static power and\npoor supply rejection.",
        "format": "markdown",
        "sha256": "e58af2ceb742dae699e7330d67c4a909e0241f63edd3c05332f8bf6b61847248"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation included consistently for both devices. Extra large-signal discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 731,
        "output_tokens": 11543,
        "total_tokens": 12274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 731,
        "output_tokens": 11543,
        "total_tokens": 12274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is the n-channel driver and $M_{2}$ is the p-channel\nload.  The body of $M_{1}$ is its source, the body of $M_{2}$ is\nits source, so there is no body effect. The gate of $M_{2}$ is\ntied to its drain,\n\n$$ V_{G2}=V_{D2}=V_{out}\\qquad V_{S2}=V_{DD}$$\n\ni.e. $M_{2}$ is a diode connected p-device between $V_{DD}$ and the\noutput.  $M_{1}$ is a common source device. With no d-c load at\nthe output\n\n$$I_{D1}=I_{D2}=I_D $$\n\n$\\beta_{n,p}=\\mu_{n,p}C_{ox}(W/L)_{1,2}$.\n\nFor the p-device\n$$V_{SG2}=V_{DD}-V_{out}=V_{SD2}$$\nhence, when it is on,\n$$V_{SD2}=V_{SG2}>V_{SG2}-|V_{TP}|$$\n$M_{2}$ is always in saturation when it conducts. Its current,\n$\\lambda$ neglected for the moment, is\n\n$$ I_{D2}= \\frac{\\beta_p}{2}\\,\n\\bigl(V_{DD}-V_{out}-|V_{TP}|\\bigr)^{2}\\qquad \nV_{DD}-V_{out}>|V_{TP}| $$\n\nFor $M_{1}$\n\n$$ I_{D1}= \\frac{\\beta_n}{2}\\,(V_{in}-V_{TN})^{2} \\quad{\\rm sat.}$$\n$$ I_{D1}= \\beta_n\\Bigl[(V_{in}-V_{TN})V_{out}-\\tfrac12V_{out}^{2}\\Bigr]\n\\quad{\\rm triode.}$$\n\n### Voltage transfer characteristic\n\n1. $V_{in}<V_{TN}$: $M_{1}$ off. $I_D=0$. $M_{2}$ conducts only\nuntil $V_{SG2}=|V_{TP}|$.  In the square law model\n\n$$ V_{OH}=V_{DD}-|V_{TP}| $$\n\nThe output cannot pull all the way to $V_{DD}$. The node is\nin fact floating at this level.\n\n2. $V_{in}$ just above $V_{TN}$: $M_{1}$ and $M_{2}$ in saturation.\n$I_{D1}=I_{D2}$ gives\n\n$$ \\beta_n (V_{in}-V_{TN})^{2}\n      =\\beta_p\\bigl(V_{DD}-V_{out}-|V_{TP}|\\bigr)^{2} $$\n\n$$\\,V_{out}=V_{DD}-|V_{TP}|\n      -\\sqrt{\\frac{\\beta_n}{\\beta_p}}\\;(V_{in}-V_{TN})\\,  $$\n\nThe square law of $M_{1}$ is cancelled by the square law of the\ndiode load: the $V_{out}-V_{in}$ characteristic is, to first\norder, a straight line. \n\n$M_{1}$ stays in saturation for $V_{out}\\ge V_{in}-V_{TN}$.\nThe end of the saturated region is at\n\n$$ V_{in}-V_{TN}= \\frac{V_{DD}-|V_{TP}|}\n{1+\\sqrt{\\beta_n/\\beta_p}},\\qquad\nV_{out}= \\frac{V_{DD}-|V_{TP}|}\n{1+\\sqrt{\\beta_n/\\beta_p}} .$$\n\n3. Larger $V_{in}$: $M_{1}$ in the triode region, $M_{2}$ still\nsaturated,\n\n$$ \\beta_n\\Bigl[(V_{in}-V_{TN})V_{out}-\\tfrac12V_{out}^{2}\\Bigr]\n =\\frac{\\beta_p}{2}\\bigl(V_{DD}-V_{out}-|V_{TP}|\\bigr)^{2} $$\n\n$V_{out}$ falls slowly toward a non-zero $V_{OL}$, for\n$V_{in}=V_{DD}$ approximately\n\n$$ V_{OL}\\approx \n\\frac{\\beta_p\\,(V_{DD}-|V_{TP}|)^{2}}\n     {2\\beta_n\\,(V_{DD}-V_{TN})}\\ll V_{DD}\\;\\;{\\rm if}\\;\\;\n\\beta_n\\gg\\beta_p . $$\n\nIt is ratioed logic: $V_{OL}$, the switching point and the gain\ndepend on $\\beta_n/\\beta_p$. The logic switching voltage,\n$V_{in}=V_{out}=V_M$, from (2),\n\n$$ V_M=\n\\frac{\\,V_{DD}-|V_{TP}|+\\sqrt{\\beta_n/\\beta_p}\\;V_{TN}\\,}\n     {\\,1+\\sqrt{\\beta_n/\\beta_p}\\,} .$$\n\nWith $V_{in}$ high there is a direct d-c current\n$I_D\\approx \\tfrac{\\beta_p}{2}(V_{DD}-|V_{TP}|)^{2}$ from\n$V_{DD}$ to ground: static power dissipation in the low state.\nIn the high state, ideally, there is none.\n\n### Small signal behaviour in saturation\n\nFor $M_{2}$, $v_{sg2}=-v_{out}$.  A diode connected MOS is, to\nsmall signals, a resistance $1/g_{m2}$ in parallel with $r_{o2}$\nto a-c ground.  Hence at the output node\n\n$$ R_{out}= r_{o1}\\;\\Big\\|\\;r_{o2}\\;\\Big\\|\\;\\frac1{g_{m2}}\n        =\\frac{1}{g_{m2}+g_{ds1}+g_{ds2}}\n        \\approx \\frac1{g_{m2}} $$\n\nand\n\n$$\\,A_v=\\frac{v_{out}}{v_{in}}=-g_{m1}R_{out}\n      =-\\,\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}\\, $$\n\nWith $\\lambda=0$, at the same bias current\n$g_m=\\sqrt{2\\beta I_D}$,\n\n$$ A_v\\approx -\\frac{g_{m1}}{g_{m2}}\n      =-\\sqrt{\\frac{\\beta_n}{\\beta_p}}\n      =-\\sqrt{\\,\n        \\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\\; $$\n\nin agreement with $dV_{out}/dV_{in}$ from the large signal\nexpression.  With $\\lambda\\ne0$ $|A_v|$ is slightly smaller and\nthe transfer curve is slightly bent.\n\nThe gain is to first order independent of $I_D$ and of $V_{DD}$,\nset only by the device ratio. To get $|A_v|>1$, let alone\n$5$--$10$, $\\beta_n\\gg\\beta_p$ is required. $R_{out}\\approx\n1/g_{m2}$ is low, so the output pole $ \\approx\n(g_{m2}+g_{ds1}+g_{ds2})/C_L$ is high: low gain but wide\nbandwidth and good capability to drive a capacitive load on\nthe pull-down. Pull up is weak and becomes progressively\nweaker as $V_{out}\\to V_{DD}-|V_{TP}|$.\n\nIn short: a common-source nMOS with a diode-connected pMOS\nload, usable as a low-gain, fairly linear amplifier, or as a\nratioed inverter with $V_{OH}=V_{DD}-|V_{TP}|$, non-zero\n$V_{OL}$, static power in the low state, and gain,\nswing and noise margins fixed by $(W/L)_1/(W/L)_2$.",
        "format": "markdown",
        "sha256": "a2241dfe679f9df7a6e23f637a6e530205851f88bd263d81a3e68a7fd0a1e54a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, consistently including both devices’ output conductances (and the usual −gm1/gm2 approximation).",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 731,
        "output_tokens": 7402,
        "total_tokens": 8133,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 731,
        "output_tokens": 7402,
        "total_tokens": 8133,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5580,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both devices are $p$-channel. The arrow is the\nsource terminal, shorted to the $n$-body.\nFor $M_{2}$ the source is tied to $V_{DD}$, for $M_{1}$ the\nsource is tied to the output node. Hence there is no body\neffect in either device. Put $|V_{tp}|=V_{t}>0$,\n$\\beta_i=\\mu_pC_{ox}(W/L)_i$.\n\n$$\\begin{aligned}\nM_{2}:&\\qquad V_{SG2}=V_{DD}-V_{in}, &&V_{SD2}=V_{DD}-V_{out}\\\\\nM_{1}:&\\qquad V_{SG1}=V_{out}-0=V_{out}, &&V_{SD1}=V_{out}-0=V_{out}\n\\end{aligned}$$\n\n$M_{2}$ is a common source $p$-device with source at a.c.\nground. $M_{1}$ has gate and drain both at ground: it is a\ndiode connected $p$-device between $V_{out}$ and ground,\nsource at $V_{out}$, gate-drain at ground. It is the load.\n\nFor $M_{1}$, when it is on,\n$$\nV_{SD1}=V_{SG1}>V_{SG1}-V_{t}\n$$\nso $M_{1}$ is always in saturation, or off.  Neglecting\n$\\lambda$ for the d.c. characteristic,\n\n$$\nI_{1}= \\begin{cases}\n0 & V_{out}\\le V_{t}\\\\[2pt]\n\\dfrac{\\beta_{1}}{2}\\,(V_{out}-V_{t})^{2} & V_{out}>V_{t}\\quad{\\rm sat.}\n\\end{cases}\n$$\n\ni.e. a non linear load whose current grows as\n$(V_{out}-V_{t})^{2}$. $M_{2}$ may be off, saturated or linear,\nwith $I_{2}=I_{1}\\equiv I$ in the series branch.\n\n### Voltage transfer characteristic\n\n$V_{in}=V_{DD}$: $M_{2}$ is off, $I=0$, hence $I_{1}=0$ and\n\n$$\nV_{out}\\approx V_{t}\\qquad V_{in}>V_{DD}-V_{t}.\n$$\n\nThe output can never be pulled to ground. Below $V_{t}$,\n$M_{1}$ turns off and in the ideal model the node is floating.\nIn practice subthreshold leakage settles it near $V_{t}$.\nThis is the ``low'' output level.\n\nFor $V_{in}<V_{DD}-V_{t}$, $M_{2}$ first saturates,\n$V_{DD}-V_{out}>V_{DD}-V_{in}-V_{t}$. With $I_{1}=I_{2}$,\n\n$$\n\\frac{\\beta_{1}}{2}(V_{out}-V_{t})^{2}\n   =\\frac{\\beta_{2}}{2}(V_{DD}-V_{in}-V_{t})^{2}\n$$\n\n$$\n\\,V_{out}=V_{t}+\\sqrt{\\frac{\\beta_{2}}{\\beta_{1}}}\\,\n\\bigl(V_{DD}-V_{t}-V_{in}\\bigr)\\,\n\\qquad\\text{both saturated}\n$$\n\nan inverting, essentially linear, characteristic of slope\n$-\\sqrt{\\beta_{2}/\\beta_{1}}$.\n\n$M_{2}$ enters the triode region when\n$V_{SD2}=V_{SG2}-V_{t}$, i.e. $V_{out}=V_{in}+V_{t}$, at\n\n$$\nV_{in,tr}= \\frac{\\sqrt{\\beta_{2}/\\beta_{1}}}{1+\\sqrt{\\beta_{2}/\\beta_{1}}}\n\\,(V_{DD}-V_{t}) .\n$$\n\nFor $V_{in}<V_{in,tr}$, $M_{2}$ is linear, $M_{1}$ saturated,\n\n$$\n\\frac{\\beta_{1}}{2}(V_{out}-V_{t})^{2}\n =\\beta_{2}\\Bigl[(V_{DD}-V_{in}-V_{t})(V_{DD}-V_{out})\n      -\\frac{(V_{DD}-V_{out})^{2}}{2}\\Bigr],\n$$\n\nand $V_{out}$ bends over toward a maximum $V_{OH}<V_{DD}$,\nobtained at e.g. $V_{in}=0$. With $x=V_{DD}-V_{OH}$ small,\n$x\\approx \\dfrac{\\beta_{1}}{2\\beta_{2}}(V_{DD}-V_{t})$.\nThe output can never quite reach $V_{DD}$, because at\n$V_{out}=V_{DD}$ $M_{1}$ would demand a large current which\n$M_{2}$ in triode with $V_{SD2}\\to0$ cannot supply.\n\nThe switching voltage $V_{in}=V_{out}=V_{M}$, in saturation,\nis\n$$\nV_{M}= \\frac{\\sqrt{\\beta_{2}}\\,V_{DD}+(\\sqrt{\\beta_{1}}-\\sqrt{\\beta_{2}})V_{t}}\n{\\sqrt{\\beta_{1}}+\\sqrt{\\beta_{2}}},\\qquad \nV_{M}=V_{DD}/2\\;\\;{\\rm if}\\;\\;\\beta_{1}=\\beta_{2}.\n$$\nIt is a ratioed characteristic: levels and $V_{M}$ depend\non $\\beta_{2}/\\beta_{1}$, unlike a CMOS inverter.\n\nExcept at $V_{in}\\approx V_{DD}$ there is a direct d.c. path\n$V_{DD}\\to M_{2}\\to M_{1}\\to{\\rm GND}$ and a static current\n$I$ above, $P_{stat}\\approx V_{DD}I$, largest for $V_{in}$ low.\n\n### Small signal behaviour\n\nBias in the both-saturated region. $M_{1}$, diode connected\nwith gate-drain at a.c. ground and body to source, presents\nat its source\n\n$$\nR_{1}= \\frac{1}{g_{m1}+g_{mb1}+g_{ds1}}=\\frac{1}{g_{m1}+g_{ds1}}\\approx\\frac1{g_{m1}} .\n$$\n\nHence at the output\n\n$$\nR_{out}= r_{o2}\\Big\\|\\frac{1}{g_{m1}+g_{ds1}}\\approx\\frac1{g_{m1}},\n\\qquad \nA_{v}= \\frac{v_{out}}{v_{in}} = -g_{m2}R_{out}\n      =-\\,\\frac{g_{m2}}{g_{m1}+g_{ds1}+g_{ds2}} .\n$$\n\nFor $g_mr_o\\gg1$, with the same current in the two devices,\n\n$$\nA_{v}\\approx -\\frac{g_{m2}}{g_{m1}}\n      =-\\sqrt{\\frac{(W/L)_{2}}{(W/L)_{1}}}\\;,\n$$\n\nin particular $|A_{v}|\\approx1$ for equal devices. In the\ntriode region for $M_{2}$, $|A_{v}|$ is even smaller.\nInput resistance is that of a gate, essentially infinite.\n\nIn short it is a $p$-channel common-source stage with a\nsaturated diode-connected $p$-load to ground, i.e. a ratioed\n$p$MOS inverter. It inverts, but with\n\n* incomplete swing, $V_{t}\\lesssim V_{out}\\lesssim V_{DD}$,\n  never $0$ or $V_{DD}$;\n* static power dissipation in essentially every state except\n  $V_{in}=V_{DD}$;\n* low, size-ratio determined gain $\\approx\n  -\\sqrt{(W/L)_{2}/(W/L)_{1}}$, and considerable non-linearity\n  outside the both-saturated window;\n* slow, incomplete discharge of a capacitive load: $M_{1}$\n  current $\\propto (V_{out}-V_{t})^{2}$ vanishes at $V_{out}=V_{t}$.\n\nLarge gain requires $(W/L)_{2}\\gg (W/L)_{1}$, at the expense\nof swing, bias range and static current. It is therefore a\npoor logic gate and a low-gain, limited-swing amplifier.",
        "format": "markdown",
        "sha256": "4d6933400fbffb942832ddb294cfd2eeda45effecea829808138228c07ec4bd1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load to ground. It gives the expected gm/gm gain, Av ≈ −gm2/gm1, and its additional logic-level discussion does not replace the correct load interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1757,
        "output_tokens": 11518,
        "total_tokens": 13275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1757,
        "output_tokens": 11518,
        "total_tokens": 13275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9594,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both transistors have their body terminal tied to the\nterminal with the arrow, i.e. to their source, and the arrow\npoints from source to body. Both are PMOS.\n\n* $M_{2}$ : source to $V_{DD}$, drain to $V_{out}$, gate $=V_{in}$\n* $M_{1}$ : source to $V_{out}$, drain to ground, gate to ground\n\nHence for both devices $V_{SB}=0$; there is no body effect and\n$|V_{Tp}|$ is constant. $M_{1}$ has gate tied to drain, both at\nground. It is a diode connected PMOS load. The stage is the\nPMOS analogue of a saturated-load inverter: an inverting\ncommon-source $M_{2}$ with a diode connected load $M_{1}$.\nIt is a ratioed, not a complementary, stage.\n\nLet currents be taken as magnitudes, $\\beta_i=\\mu_pC_{ox}(W/L)_i$,\n$\\lambda =0$ for the moment, no d.c. load at the output, so\n$I_{D1}=I_{D2}$.\n\nFor $M_{1}$\n$$\nV_{SG1}=V_{out},\\qquad V_{SD1}=V_{out}\n$$\nso $M_{1}$ is on only for $V_{out}>|V_{Tp}|$, and\n$$\nV_{SD1}=V_{SG1}>V_{SG1}-|V_{Tp}|\n$$\ni.e. a diode connected $M_{1}$ is always in saturation when on:\n$$\n I_{D1}= \\frac{\\beta_1}{2}\\bigl(V_{out}-|V_{Tp}|\\bigr)^{2}\\tag{1}\n$$\nFor $M_{2}$\n$$\nV_{SG2}=V_{DD}-V_{in},\\qquad V_{SD2}=V_{DD}-V_{out} \\tag{2}\n$$\non for $V_{in}<V_{DD}-|V_{Tp}|$, saturated for\n$V_{SD2}\\ge V_{SG2}-|V_{Tp}|$, i.e. for $V_{out}\\le V_{in}+|V_{Tp}|$.\n\n### D.C. transfer characteristic\n\n1. $V_{in}>V_{DD}-|V_{Tp}|$ : $M_{2}$ off.\n\n$I_D=0$, hence from (1) $M_{1}$ can only discharge an output\ncapacitance down to\n$$\nV_{out}\\;\\approx\\;|V_{Tp}|\n$$\nand then it cuts off. The low level is not $0$.\n\n2. $M_{2}$ and $M_{1}$ saturated.\nFrom (1) and $I_{D2}= \\tfrac{\\beta_2}{2}(V_{DD}-V_{in}-|V_{Tp}|)^2$,\n$I_{D1}=I_{D2}$ gives\n$$\n\\,V_{out}=|V_{Tp}|+\n\\sqrt{\\frac{\\beta_2}{\\beta_1}}\\,\n\\bigl(V_{DD}-|V_{Tp}|-V_{in}\\bigr)\\, \\tag{3}\n$$\na straight line of slope $-\\sqrt{\\beta_2/\\beta_1}$.\nIt is valid for $V_{out}\\le V_{in}+|V_{Tp}|$, i.e. down to\n$$\nV_{in,tr}= \\frac{V_{DD}-|V_{Tp}|}{1+\\sqrt{\\beta_1/\\beta_2}}\\; .\n$$\n\n3. $V_{in}<V_{in,tr}$ : $M_{2}$ in triode, $M_{1}$ saturated.\n$$\n\\beta_2\\!\\left[(V_{DD}-V_{in}-|V_{Tp}|)(V_{DD}-V_{out})\n-\\tfrac12(V_{DD}-V_{out})^{2}\\right]\n=\\frac{\\beta_1}{2}\\bigl(V_{out}-|V_{Tp}|\\bigr)^{2} \\tag{4}\n$$\n$V_{out}$ bends over toward $V_{DD}$.  At $V_{in}=0$\n$V_{OH}<V_{DD}$ is given by (4); for $\\beta_2\\gg\\beta_1$\n$$\nV_{OH}\\approx V_{DD}-\\frac{\\beta_1}{2\\beta_2}\\,(V_{DD}-|V_{Tp}|).\n$$\n\nIn words, $V_{out}$ is $\\approx |V_{Tp}|$ for large $V_{in}$, rises\nwith slope $-\\sqrt{\\beta_2/\\beta_1}$ in the middle, and flattens\nat $V_{OH}<V_{DD}$ for small $V_{in}$. It inverts, but with\nseverely reduced swing, $|V_{Tp}|$ to $V_{OH}$.\n\n### Small signal behaviour, region 2\n\n$M_{1}$ with gate a.c. ground and $v_{s}=v_{out}$ presents at\nthe output\n$$\nR_{1}= \\frac{v_{out}}{i_{out}}=\n\\frac{1}{g_{m1}+g_{ds1}}\\approx\\frac1{g_{m1}}\\qquad (g_{mb1}=0).\n$$\nHence, with $\\lambda\\ne0$,\n$$\n A_v=\\frac{v_{out}}{v_{in}}\n      =-g_{m2}\\Bigl(r_{o2}\\parallel r_{o1}\\parallel\\frac1{g_{m1}}\\Bigr)\n      =-\\,\\frac{g_{m2}}{\\,g_{m1}+g_{ds1}+g_{ds2}\\,}\n      \\;\\approx\\;-\\frac{g_{m2}}{g_{m1}}\n      =-\\sqrt{\\frac{\\beta_2}{\\beta_1}}\n      =-\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\;,\n$$\n$$\nR_{out}\\approx r_{o2}\\parallel \\frac1{g_{m1}}\\approx\\frac1{g_{m1}} .\n$$\nThe gain is set only by the size ratio. A gain of even\n$3$--$5$ requires a very large $(W/L)_2/(W/L)_1$. In the\ntriode region $|A_v|$ falls to zero.\n\n### As a logic gate\n\n* $V_{OL}\\approx |V_{Tp}|\\ne0$, $V_{OH}<V_{DD}$: poor noise margins.\n* For $V_{in}$ low, output high, both devices are on and a\nstatic current\n$I\\approx \\tfrac{\\beta_1}{2}(V_{OH}-|V_{Tp}|)^2$ flows from\n$V_{DD}$ to ground: static power $V_{DD}I$. For $V_{in}$ high\nthe current is ideally zero.\n* Pull-up is by $M_{2}$ fighting the on $M_{1}$; pull-down is\nby $M_{1}$ alone, and it stops at $|V_{Tp}|$.\n\nSmall $\\beta_1$ improves $V_{OH}$, gain and static power, but\nslows the discharge and makes $R_{out}\\approx1/g_{m1}$ large.\nIn short, a low-gain inverting amplifier / ratioed PMOS\ninverter with diode-connected saturated load, limited swing,\nstatic dissipation in one state, and gain $\\approx\n-\\sqrt{(W/L)_2/(W/L)_1}$.",
        "format": "markdown",
        "sha256": "62ff7325c0680bc4253fc5befd2699bef8d5d8095c843e1c9d51a06993328866"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. It gives the correct approximate gain, Av ≈ −gm2/gm1; the additional transfer-curve and logic discussion does not replace the essential circuit interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1757,
        "output_tokens": 18522,
        "total_tokens": 20279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1757,
        "output_tokens": 18522,
        "total_tokens": 20279,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both devices are PMOS, with the body tied to the\nsource, so that there is no body effect in either device.\n$M_{2}$ is the input device and $M_{1}$ is the load.\nFor $M_{1}$ the gate is tied to the drain, both at ground:\nit is a diode connected PMOS between $V_{out}$ and ground.\n\nLet, in magnitude,\n$$ \\beta_i=\\mu_pC_{ox}\\left({W\\over L}\\right)_i\\qquad \n|V_{TP}|>0\\qquad S=\\sqrt{\\beta_2\\over \\beta_1}\\; .$$\nThe same d-c current $I_D$ flows in $M_1$ and $M_2$ from\n$V_{DD}$ to ground.\n\n### Large signal behaviour\n\nFor $M_{1}$\n$$ V_{SG1}=V_{SD1}=V_{out} $$\nso that, whenever it is on,\n$$ V_{SD1}=V_{SG1}\\ge V_{SG1}-|V_{TP}| $$\ni.e. the diode connected load is always in saturation,\n$$ I_{D}= {\\beta_1\\over 2}\\,\n\\bigl(V_{out}-|V_{TP}|\\bigr)^{2}\\qquad V_{out}>|V_{TP}| \\tag{1}$$\nneglecting $\\lambda$ for the moment.  For $M_{2}$\n$$ V_{SG2}=V_{DD}-V_{in},\\qquad V_{SD2}=V_{DD}-V_{out} $$\n$$ I_D={\\beta_2\\over 2}\n\\bigl(V_{DD}-V_{in}-|V_{TP}|\\bigr)^{2}\\quad{\\rm in\\; saturation} \\tag{2}$$\n$M_{2}$ is in saturation for\n$$V_{SD2}\\ge V_{SG2}-|V_{TP}|\\iff V_{out}\\le V_{in}+|V_{TP}| .$$\n\n$M_{2}$ off:  $V_{in}\\ge V_{DD}-|V_{TP}|$.  Then $I_D=0$ and\nfrom (1) \n$$ V_{out}\\;\\to\\;|V_{TP}| \\equiv V_{OL} $$\nin the ideal square law model.  The output cannot be pulled\nto ground.\n\n$M_{1},M_{2}$ saturated: equating (1) and (2),\n$$ \\sqrt{\\beta_{2}}\\,\n\\bigl(V_{DD}-V_{in}-|V_{TP}|\\bigr)=\n\\sqrt{\\beta_{1}}\\,\n\\bigl(V_{out}-|V_{TP}|\\bigr) $$\ni.e.\n$$\\,V_{out}=|V_{TP}|+S\\,\n\\bigl(V_{DD}-|V_{TP}|-V_{in}\\bigr)\\,,\\qquad \nS=\\sqrt{\\frac{(W/L)_{2}}{(W/L)_{1}} }  \\tag{3}$$\na straight line of slope $-S$.  This holds for \n$V_{in}\\le V_{DD}-|V_{TP}|$ and $V_{out}\\le V_{in}+|V_{TP}|$,\ni.e. down to\n$$ V_{in,b}={S\\over 1+S}\\bigl(V_{DD}-|V_{TP}|\\bigr),\\qquad\n   V_{out,b}=|V_{TP}|+{S\\over 1+S}\\bigl(V_{DD}-|V_{TP}|\\bigr). $$\n\n$M_{2}$ in triode, $M_{1}$ saturated, for $V_{in}$ still lower:\n$$ \\beta_{2}\\!\\left[(V_{DD}-V_{in}-|V_{TP}|)(V_{DD}-V_{out})\n-{(V_{DD}-V_{out})^{2}\\over2}\\right]\n={\\beta_{1}\\over2}\\bigl(V_{out}-|V_{TP}|\\bigr)^{2} $$\n$V_{out}$ approaches, but does not reach, $V_{DD}$.\nFor $V_{in}=0$, e.g., $V_{DD}-V_{OH}\\approx\n(V_{DD}-|V_{TP}|)/2S^{2}$ for $S\\gg1$.\n\nHence an inverting, ratioed, transfer characteristic,\n$|V_{TP}|\\lesssim V_{out}\\lesssim V_{DD}$, with static current\n$I_D=\\tfrac12\\beta_{1}(V_{out}-|V_{TP}|)^{2}$ except when\n$M_{2}$ is off.  Biased in the both-saturated region it is a\nPMOS common-source amplifier with a saturated diode load.\nWith $\\lambda\\ne0$ (3) is only approximate.\n\n### Small signal behaviour\n\nIn the both-saturated region, with $I_{DQ}$ the bias current,\n$$g_{mi}= \\beta_i\\bigl(V_{SGi}-|V_{TP}|\\bigr)=\\sqrt{2\\beta_i I_{DQ}}\\;, \n\\qquad r_{oi}=1/g_{dsi}\\; .$$\nFor $M_{1}$, $v_g=0$ and $v_{sg}=v_{sd}=v_{out}$, and\n$v_{bs}=0$ (body tied to its source).  Hence the current\npulled to ground by $M_{1}$ changes by\n$(g_{m1}+g_{ds1})v_{out}$: $M_{1}$ looks from the output like\n$$ R_{1}={1\\over g_{m1}+g_{ds1}}={1\\over g_{m1}}\\;\\Big\\|\\;r_{o1}\n\\approx {1\\over g_{m1}} $$\nto ground.  For $M_{2}$, $v_{sg2}=-v_{in}$, so that at the output\n$$ -g_{m2}v_{in}=(g_{m1}+g_{ds1}+g_{ds2})v_{out} $$\n$$\\,A_v={v_{out}\\over v_{in}}=\n-{g_{m2}\\over g_{m1}+g_{ds1}+g_{ds2}}\n= -g_{m2}R_{out}\\,  $$\nwith\n$$\\,R_{out}= {1\\over g_{m1}+g_{ds1}+g_{ds2}}\n      = r_{o2}\\;\\Big\\|\\;{1\\over g_{m1}+g_{ds1}}\\approx{1\\over g_{m1}}\\,,\\qquad R_{in}\\approx\\infty  $$\nat low frequencies.  At the same $I_{DQ}$,\n$g_{m2}/g_{m1}=\\sqrt{\\beta_{2}/\\beta_{1}}$, so for $\\lambda\\to0$\n$$ A_{v}\\;\\approx\\;-\\sqrt{\\beta_{2}\\over\\beta_{1}}\n      =-\\sqrt{\\frac{(W/L)_{2}}{(W/L)_{1}}}\\;, $$\nindependent, to first order, of the bias point, in agreement\nwith (3).  Channel length modulation reduces $|A_v|$ somewhat.\n\nThus useful gain requires $(W/L)_{2}\\gg(W/L)_{1}$, at the\nexpense of the allowable $V_{in},V_{out}$ swing in the\nsaturated region, $\\,V_{out,b}-|V_{TP}|=\n\\frac{S}{1+S}(V_{DD}-|V_{TP}|)$, and of speed, $R_{out}\\approx\n1/g_{m1}$ being large for a small load device.  It is a low\nto moderate gain inverting stage, or a PMOS ratioed inverter\nwith a degraded low level $ |V_{TP}|$ and static power\ndissipation in the on state. ∎",
        "format": "markdown",
        "sha256": "c163553d40a8816a3a46f3a79bce038812c93fbeeaddcd12e0989adc100a9734"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load to ground. It derives the expected gm/gm gain, Av ≈ −gm2/gm1; the additional large-signal discussion does not undermine the essential answer.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1757,
        "output_tokens": 16061,
        "total_tokens": 17818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1757,
        "output_tokens": 16061,
        "total_tokens": 17818,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14236,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the small signal model $V_{DD},V_{b1},V_{b2}$ are a-c ground.\n$M_{2}$ and $M_{1}$ are p-channel devices in series.  The\nterminal at the bottom is the drain of $M_{1}$.  $M_{1}$ is the\ncommon-gate device and $M_{2}$ is the device feeding its source\nat $X$.\n\nFor both devices the body is tied to its own source, as drawn,\nso that\n\n$$V_{BS1}=V_{BS2}=0\\qquad\\Longrightarrow\\qquad g_{mb1}=g_{mb2}=0$$\nin the small signal model.\n\nApply a test voltage $V_T$ at the output and let $I_T$ be the\ncurrent entering the drain of $M_{1}$.\n\nThe gate and source of $M_{2}$ are at a-c ground, so from $X$\nto a-c ground $M_{2}$ looks simply as its output resistance\n$r_{o2}$.  Hence the voltage at the source of $M_{1}$ is\n\n$$V_X = I_T r_{o2}. $$\n\nFor $M_{1}$ the gate is at a-c ground, so\n\n$$v_{gs1} = -V_X\\qquad\\text{(in magnitude }v_{sg1}=V_X\\text{).}$$\n\nThe drop across $r_{o1}$ is due to $I_T$ and to the controlled\nsource $g_{m1}V_X$:\n\n$$V_T = V_X + r_{o1}\\bigl(I_T+g_{m1}V_X\\bigr).$$\n\nSubstituting $V_X=I_T r_{o2}$,\n\n$$\\begin{aligned}\nV_T &= I_T r_{o2}+r_{o1}I_T+g_{m1}r_{o1}I_T r_{o2} \\\\\n    &= I_T\\Bigl[\\,r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\\Bigr].\n\\end{aligned}$$\n\nHence\n\n$$R_{\\text{out}}=\\frac{V_T}{I_T}=r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n      = r_{o1}+\\bigl(1+g_{m1}r_{o1}\\bigr)r_{o2}\\;\\approx\\;g_{m1}r_{o1}r_{o2}$$\n\nfor $g_{m1}r_{o1}\\gg1$, i.e. the resistance $r_{o2}$ boosted by the\nintrinsic gain of the cascode device $M_{1}$.",
        "format": "markdown",
        "sha256": "81702edc77414dca10219efa23702fc8eb6e42c18fb8f886316dc6d319a40db2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the cascode device, and gives the accepted output-resistance expression and approximation. Body-effect treatment is optional under the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2822,
        "output_tokens": 8111,
        "total_tokens": 10933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2822,
        "output_tokens": 8111,
        "total_tokens": 10933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7341,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$V_{b1},V_{b2}$ and $V_{DD}$ are a-c ground.  \nAs drawn the bulk of each device is tied to its own source,\nso that, incrementally,\n\n$$v_{bs1}=v_{bs2}=0$$\n\nand there is no body effect. $M_{1}$ is the common-gate\ndevice, $M_{2}$ is the device whose drain resistance\ndegenerates the source of $M_{1}$.\n\nApply a test voltage $V_{t}$ at the output and let $I_{t}$\nbe the current drawn into the drain of $M_{1}$. Let the\n(incremental) voltage at the intermediate node be $V_{X}$.\n\nFor $M_{2}$ the source and the gate are at a-c ground, so\n$v_{sg2}=0$ and the resistance from node $X$ to a-c ground\nis simply $r_{o2}$.  The same (incremental) current flows\nin $M_{1}$ and $M_{2}$, hence\n\n$$V_{X}= I_{t}r_{o2}\\tag{1}$$\n\nFor $M_{1}$, with current taken from source to drain,\n\n$$-I_{t}=g_{m1}v_{sg1}+\\frac{v_{sd1}}{r_{o1}} $$\n\n$$v_{sg1}=V_{X}-0=V_{X},\\qquad v_{sd1}=V_{X}-V_{t}$$\n\nso that\n\n$$-I_{t}=g_{m1}V_{X}+\\frac{V_{X}-V_{t}}{r_{o1}} \\tag{2}$$\n\nSubstituting (1) in (2),\n\n$$-I_{t}=g_{m1}I_{t}r_{o2}+\\frac{I_{t}r_{o2}-V_{t}}{r_{o1}}$$\n\n$$\\frac{V_{t}}{r_{o1}}=I_{t}\\left(1+g_{m1}r_{o2}+\\frac{r_{o2}}{r_{o1}}\\right)$$\n\nHence the resistance looking into the drain of the\ncascode device $M_{1}$ is\n\n$$\\boxed{\\,R_{out}=\\frac{V_{t}}{I_{t}}\n      =r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n      =r_{o2}+\\bigl(1+g_{m1}r_{o2}\\bigr)r_{o1}\n      \\;\\approx\\; g_{m1}r_{o1}r_{o2}\\,}$$\n\nfor $g_{m1}r_{o1},\\,g_{m1}r_{o2}\\gg1$.  $M_{2}$ contributes\nonly its $r_{o2}$ as source degeneration for the common-gate\ndevice $M_{1}$, boosting $r_{o1}$ by about $g_{m1}r_{o2}$.",
        "format": "markdown",
        "sha256": "57fd483be044a4595766eebd730f44b2bff22a75b339e6712051bfaf0c0c6f40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate cascode device and derives Rout = ro1 + ro2 + gm1 ro1 ro2, with the appropriate large-gain approximation. Omitting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2822,
        "output_tokens": 8967,
        "total_tokens": 11789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8146,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2822,
        "output_tokens": 8967,
        "total_tokens": 11789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8146,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both devices are in saturation with the same $I_D$.\n$V_{b1},V_{b2}$ and $V_{DD}$ are a-c ground.\n\nFor $M_2$ the body is tied to $V_{DD}$, i.e. to its source.\nFor $M_1$ the body is tied at $X$ to its own source.\nHence for both devices\n\n$$\nV_{BS}=0\\qquad\\Longrightarrow\\qquad g_{mb}v_{bs}=0\n$$\n\ni.e. there is no body effect.\n\nApply a test voltage $V_t$ at the lower terminal and let\n$I_t$ be the current drawn, $v_x$ being the small signal\nvoltage at $X$.\n\n$M_2$ has $v_{sg2}=0$, gate and source at a-c ground, so\nfrom the source of $M_1$ the impedance to a-c ground is\nsimply the output resistance of $M_2$,\n\n$$\nR_S = r_{o2}.\n$$\n\n$M_1$ is a common gate device with source degeneration\n$R_S=r_{o2}$.  At node $X$\n\n$$\n-I_t=\\;g_{m1}v_x+\\frac{v_x-V_t}{r_{o1}},\\qquad \n-I_t=-\\frac{v_x}{r_{o2}}\n$$\n\nin magnitude, whence\n\n$$\nV_t = v_x\\bigl(g_{m1}r_{o1}+1+r_{o1}/r_{o2}\\bigr),\\qquad \nI_t = \\frac{v_x}{r_{o2}} .\n$$\n\nTherefore\n\n$$\nR_{out}= \\frac{V_t}{I_t}\n       = r_{o1}+r_{o2}+g_{m1}r_{o1}r_{o2}\n$$\n\ni.e. for $g_{m1}r_{o1}\\gg1$\n\n$$\n\\,R_{out}\\approx g_{m1}r_{o1}r_{o2}\\,\n$$\n\nthe $r_{o2}$ of the lower cascode device boosted by\n$g_{m1}r_{o1}$.",
        "format": "markdown",
        "sha256": "32991306658773cc02eb1676f7aef03bef3757daa702be61a07ecd5421e94863"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies M1 as the common-gate cascode device and derives the correct result, Rout = ro1 + ro2 + gm1 ro1 ro2, with the correct dominant approximation. Its body-effect discussion is consistent with the stated source/body ties.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2822,
        "output_tokens": 6624,
        "total_tokens": 9446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2822,
        "output_tokens": 6624,
        "total_tokens": 9446,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6006,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{2}$ is the p-channel device at the top, $M_{1}$\nthe p-channel cascode device below it. The drain\nvoltage of $M_{2}$ is not free; it is the source voltage\nof $M_{1}$,\n\n$$V_{X}=V_{b1}+V_{SG1}\n      =V_{b1}+|V_{THP1}|+V_{ov1}\\qquad \nV_{ov1}= \\sqrt{\\frac{2I_D}{\\mu_pC_{ox}(W/L)_1}} $$\n\nthe bodies being tied to the respective sources, so that\nthere is no body effect.  For a pMOS in saturation, with\n$V_{THP}<0$,\n\n$$ V_{SD}\\ge V_{SG}-|V_{THP}|=V_{ov}\\qquad\\Longleftrightarrow\\qquad \n       V_{D}\\le V_{G}+|V_{THP}| .$$\n\nFor $M_{2}$, $V_{D2}=V_X$, $V_{G2}=V_{b2}$, i.e.\n\n$$ V_{SD2}=V_{DD}-V_X \\;\\ge\\; V_{ov2}\n\\qquad\\Longleftrightarrow\\qquad \nV_X \\le V_{b2}+|V_{THP2}| . $$\n\nInserting $V_X$ from $M_{1}$,\n\n$$\\,V_{b1}+|V_{THP1}|+V_{ov1}\\;\\le\\;V_{b2}+|V_{THP2}|\\,$$\n\ni.e. for $|V_{THP1}|\\approx |V_{THP2}|$\n\n$$ V_{b2}-V_{b1}\\;\\gtrsim\\;V_{ov1}  $$\n\nwith a small safety margin in practice.  $V_{b1}$ and\n$V_{b2}$ cannot be chosen independently; $I_D$ and\n$(W/L)_2$ fix $V_{b2}=V_{DD}-|V_{THP2}|-V_{ov2}$, and\n$V_{b1}$ must then be made low enough, $V_{b1}\\lesssim V_{b2}-V_{ov1}$.\nIn practice $V_{b1},V_{b2}$ are generated by a replica\n$M_{1}$-$M_{2}$ bias branch so the inequality tracks\n$I_D$ and process.  Putting $M_{2}$ just at the edge of\nsaturation, $V_{b2}-V_{b1}\\approx V_{ov1}$, also maximises\nthe voltage available at the drain of $M_{1}$.",
        "format": "markdown",
        "sha256": "141ae15548dbc5a1fcc6b03d2477774d27a89aa7ef86f75286f06b9904c1ebdf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, relates VX to Vb1 through M1, and derives the equivalent bias condition Vb2 − Vb1 ≳ Vov1 for equal thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2679,
        "output_tokens": 7736,
        "total_tokens": 10415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2679,
        "output_tokens": 7736,
        "total_tokens": 10415,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6970,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{2}$ is the current-setting pMOS and $M_{1}$ is the\ncommon-gate cascode device below it.  For the\n$R_{out}\\approx g_{m1}r_{o1}r_{o2}$ result both must be\nsaturated.\n\nFor a pMOS, in magnitudes,\n\n$$\nV_{SD}\\ge V_{SG}-|V_{Tp}|=V_{ov}\\qquad\\Longleftrightarrow\\qquad \nV_{D}\\le V_{G}+|V_{Tp}| .\n$$\n\nFor $M_{2}$, $V_{S}=V_{DD}$, $V_{G}=V_{b2}$ and $V_{D}=V_{X}$, so\n$M_{2}$ is saturated iff\n\n$$\nV_{DD}-V_{X}\\ge V_{ov2}\\qquad\\Longleftrightarrow\\qquad \nV_{X}\\le V_{b2}+|V_{Tp2}| \\tag{1}\n$$\n\nThe point is that $V_{X}$ is not free: it is fixed by the\ncascode device $M_{1}$, whose source is $X$, gate is $V_{b1}$,\nand whose well is tied to its source, as drawn, so there is\nno body effect in $M_{1}$:\n\n$$\nV_{X}=V_{b1}+V_{SG1}=V_{b1}+|V_{Tp1}|+V_{ov1},\n\\qquad \nV_{ov1}= \\sqrt{\\frac{2I_D}{\\mu_pC_{ox}(W/L)_1}} .\n$$\n\nInserting this in (1),\n\n$$\nV_{b1}+|V_{Tp1}|+V_{ov1}\\;\\le\\;V_{b2}+|V_{Tp2}|\n$$\n\ni.e. for $|V_{Tp1}|\\approx |V_{Tp2}|$\n\n$$\n\\,V_{b2}-V_{b1}\\;\\ge\\;V_{ov1}\\,\n\\qquad\\text{or}\\qquad \nV_{SD2}=V_{ov2}+\\bigl(V_{b2}-V_{b1}-V_{ov1}\\bigr)>V_{ov2}.\n$$\n\nSo $V_{b1}$ and $V_{b2}$ cannot be chosen independently, and\nin particular $V_{b1}=V_{b2}$ puts $M_{2}$ in the triode region.\nThe cascode gate bias $V_{b1}$ must be about one overdrive\n*below* $V_{b2}$.  Making $V_{b1}$ much lower only wastes\nheadroom, since $M_{1}$ requires $V_{out}\\le V_X-V_{ov1}$.\n\nIn practice $V_{b1},V_{b2}$ are generated by a replica bias\nbranch of the same pMOS devices at the same current density,\nso that $V_{b2}-V_{b1}=V_{ov1}+$ margin tracks $V_{ov1}$ and\n$|V_{Tp}|$ over process and temperature, keeping $M_{2}$\njust in saturation with maximum output swing.",
        "format": "markdown",
        "sha256": "9f23de15cc691bc1968ad98ce5ea77e35151ac838c35f586d88f276c5071fa88"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, states M2’s saturation condition, relates VX to Vb1 through M1, and derives the equivalent bias condition Vb2−Vb1 ≥ Vov1 for matched thresholds. This satisfies the full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2679,
        "output_tokens": 6699,
        "total_tokens": 9378,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2679,
        "output_tokens": 6699,
        "total_tokens": 9378,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{2}$ is the p-channel device next to $V_{DD}$ and $M_{1}$ is\nthe cascode device. Let\n\n* source of $M_{2}$: $V_{DD}$, gate: $V_{b2}$, drain: $X$,\n* source of $M_{1}$: $X$, gate: $V_{b1}$, drain: the output.\n\nThe voltage at $X$ is not set by $M_{2}$. To first order the\nsame current flows in $M_{1}$, so $|V_{GS1}|$ is fixed by that\ncurrent and by the size of $M_{1}$, and $M_{1}$, acting as a\nsource follower, clamps\n\n$$\nV_X = V_{b1}+|V_{GS1}|\n     = V_{b1}+|V_{TH1}|+V_{ov1}\\; ,\n$$\nwith no body effect on $M_{1}$, since its n-well is tied to $X$.\n\nFor a PMOS device saturation requires, in magnitudes,\n\n$$\n|V_{DS}|\\ge |V_{GS}|-|V_{TH}|\\equiv V_{ov}.\n$$\n\nFor $M_{2}$\n\n$$\nV_{SD2}=V_{DD}-V_X ,\\qquad \nV_{SG2}=V_{DD}-V_{b2},\n$$\n\nso $M_{2}$ is in saturation iff\n\n$$\nV_{DD}-V_X \\;\\ge\\; V_{DD}-V_{b2}-|V_{TH2}|\n$$\n\ni.e.\n\n$$\n\\,V_X \\le V_{b2}+|V_{TH2}|\\,  .\n$$\n\nSubstituting $V_X=V_{b1}+|V_{GS1}|$,\n\n$$\nV_{b1}\\le V_{b2}+|V_{TH2}|-|V_{GS1}|\n      = V_{b2}-V_{ov1}-\\bigl(|V_{TH1}|-|V_{TH2}|\\bigr)\n      \\;\\approx\\; V_{b2}-V_{ov1}\\; .\n$$\n\nThus $V_{b1}$ must be made sufficiently *low*, at least about\none $M_{1}$ overdrive below $V_{b2}$. In particular $V_{b1}=V_{b2}$\nputs $M_{2}$ in the triode region.\n\nThe largest $V_{b1}$ that still saturates $M_{2}$, \n$V_X = V_{DD}-V_{ov2}$, gives the least headroom loss:\n\n$$\nV_{b1,\\max}=V_{DD}-|V_{GS1}|-|V_{GS2}|+|V_{TH2}|\\;,\n$$\n\nin practice generated with a replica stack of two diode-connected\nPMOS devices, with a small extra margin for PVT and $\\lambda$.\nLowering $V_{b1}$ further keeps $M_{2}$ safely saturated but lowers\n$V_X$ and hence wastes headroom at the output.",
        "format": "markdown",
        "sha256": "f32614148ab440d266821e4a75d6cd9e998d922c2f46d633b11c5b6af7a5c135"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, states M2’s saturation condition, relates VX to Vb1, and derives the corresponding Vb1 bound. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2679,
        "output_tokens": 7077,
        "total_tokens": 9756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2679,
        "output_tokens": 7077,
        "total_tokens": 9756,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The stage is a telescopic NMOS cascode.\n\n* $M_{1}$ is a common-source device.\n* $M_{2}$ is a common-gate device, $V_{b1}$ being a dc bias and therefore\nan ac ground.\n* $I_{1}$ is the active load. Let its small-signal resistance be $R_{1}$;\nfor an ideal current source $R_{1}\\to\\infty$.\n* The signal current is developed at node $X$ and taken out at the\ndrain of $M_{2}$.\n\nAssume midband operation, i.e. neglect device capacitances, and\n$M_{1},M_{2}$ in saturation. Put\n$g_m'=g_{m2}+g_{mb2}$ for $M_{2}$, whose source is above ground.\nIf the body of $M_{2}$ is tied to its source, $g_{mb2}=0$.\n\n### 1.  DC bias\n\nThe same current flows in $M_{1},M_{2}$ and $I_{1}$:\n\n$$\nI_{D1}=I_{D2}=I_{1}\n      =\\frac12\\mu_nC_{ox}\\left(\\frac WL\\right)_1V_{ov1}^{2}\n      =\\frac12\\mu_nC_{ox}\\left(\\frac WL\\right)_2V_{ov2}^{2}\n$$\nignoring $\\lambda$ for the bias calculation, with\n$V_{ov i}=V_{GSi}-V_{THi}$, \n$$\ng_{mi}=\\frac{2I_{1}}{V_{ovi}},\\qquad \nr_{oi}=\\frac1{\\lambda_i I_{1}} .\n$$\n\nThe intermediate voltage is\n$$\nV_X = V_{b1}-V_{GS2}=V_{b1}-V_{TH2}-V_{ov2},\n\\qquad V_{DS1}=V_X,\\;\\; V_{DS2}=V_{out}-V_X .\n$$\n$V_{TH2}$ is increased by body effect if the substrate is grounded,\n$V_{BS2}=-V_X$.\nIn saturation\n$$\nV_X\\ge V_{ov1},\\qquad V_{out}-V_X\\ge V_{ov2}\n\\;\\Longleftrightarrow\\;\nV_{out}\\ge V_{b1}-V_{TH2}.\n$$\nThe lowest useful $V_{b1}$, $V_{b1}\\approx V_{ov1}+V_{TH2}+V_{ov2}$,\ngives\n$$\nV_{out,\\min}\\approx V_{ov1}+V_{ov2},\n$$\nthe usual headroom penalty of a cascode. At the top,\n$V_{out,\\max}\\approx V_{DD}-V_{I1,\\min}$, where $V_{I1,\\min}$ is the\nvoltage $I_{1}$ needs to stay in saturation. The quiescent $V_{out}$ is\nset by the realisation of $I_{1}$; an ideal $I_{1}$ in series with an\nideal gate-controlled stack leaves it indeterminate.\n\n### 2.  Small-signal gain and resistances\n\nInput resistance, at the gate of $M_{1}$,\n$$\nR_{in}\\approx\\infty\\qquad\\text{(low frequency).}\n$$\n\nResistance looking into the drain of the cascode, with $v_{in}=0$,\nis obtained by a test source at the output. The resistance seen\nat $X$ is $r_{o1}$, and $M_{2}$ boosts it by its intrinsic gain:\n\n$$\n\\,R_{down}=r_{o2}+\\bigl[\\,1+(g_{m2}+g_{mb2})r_{o2}\\bigr]r_{o1}\\,\n      \\approx (g_{m2}+g_{mb2})\\,r_{o1}r_{o2}\\quad (g_mr_o\\gg1)\n$$\n\nHence\n$$\n\\,R_{out}=R_{down}\\parallel R_{1}\\,\\qquad \n\\bigl(R_{1}\\!\\to\\!\\infty:\\;R_{out}\\approx(g_{m2}+g_{mb2})r_{o1}r_{o2}\\bigr)\n$$\ni.e. about $(g_{m2}+g_{mb2})r_{o2}$ times larger than $r_{o1}$ alone.\nAn external load $R_L$ is included by $R_1\\to R_1\\parallel R_L$.\n\nThe (exact, to first order) midband voltage gain is\n\n$$\nA_v=\\frac{v_{out}}{v_{in}}\n =-\\,g_{m1}\\,\n   \\frac{\\bigl[1+(g_{m2}+g_{mb2})r_{o2}\\bigr]r_{o1}R_{1}}\n        {R_{1}+R_{down}}\n\\;\\approx\\;\n-\\,g_{m1}\\bigl(R_{down}\\parallel R_{1}\\bigr).\n$$\n\nFor an ideal load,\n$$\n\\,A_v\\approx -g_{m1}(g_{m2}+g_{mb2})\\,r_{o1}r_{o2}\\,\n$$\nnegative, i.e. inverting, of order $(g_mr_o)^2$ for matched devices.\nThe short-circuit transconductance remains $\\approx g_{m1}$; the\ncascode does not increase $G_m$, it increases the resistance into\nwhich $G_m$ works.\n\nThe voltage at the internal node is\n$$\n\\frac{v_x}{v_{in}}\\approx -g_{m1}\\Bigl(r_{o1}\\parallel \n\\frac{R_{1}+r_{o2}}{1+(g_{m2}+g_{mb2})r_{o2}}\\Bigr),\n\\qquad \n\\frac{v_{out}}{v_x}= \\bigl[1+(g_{m2}+g_{mb2})r_{o2}\\bigr]\n\\frac{R_{1}}{R_{1}+r_{o2}}>0 ,\n$$\nso $|v_x/v_{in}|\\ll |A_v|$: the Miller multiplication of $C_{gd1}$\nis set by the gain to $X$, not by the full gain.\n\n### 3.  Remarks\n\n* Dominant pole is normally at the output,\n$\\omega_{p,out}\\approx1/(R_{out}C_L)$. The pole at $X$,\n$\\omega_{pX}\\approx1/(R_XC_X)$ with $C_X$ the small capacitance at\n$X$ ($C_{db1}+C_{gs2}+C_{sb2}+\\cdots$), is much higher; the stage is\nconsiderably faster, for a given gain, than a simple common-source\nstage, and has good reverse isolation.\n* Costs: an extra $V_{ov}$ of headroom and reduced output swing,\nan extra bias $V_{b1}$, and the noise and finite $R_{1}$ of the\nreal current source $I_{1}$, which in practice limit the\n$(g_mr_o)^2$ gain above. Large-signal rise of a capacitive load\nis slew-limited by $I_{1}/C_L$.\n\nIn short: $M_{1}$ converts $v_{in}$ to a current $\\approx g_{m1}v_{in}$,\n$M_{2}$ passes that current to a load while raising the output\nresistance from $r_o$ to $\\sim g_mr_o^{2}$, giving a high-gain,\nwideband, inverting telescopic cascode stage.",
        "format": "markdown",
        "sha256": "6e00fb509223ef9b16f9d2c8bc8ecae71105772150322606077dc59c6a3e29e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS input and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain with the finite-load resistance relation.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1371,
        "output_tokens": 19925,
        "total_tokens": 21296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1371,
        "output_tokens": 19925,
        "total_tokens": 21296,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a **telescopic cascode common-source stage**. $M_1$ is the input common-source device, $M_2$ is a common-gate cascode device, $V_{b1}$ is a fixed bias (a.c. ground) and $I_1$ is an active load.\n\n### 1. d.c. bias\n\nBoth devices carry the same current,\n\n\\[\nI_{D1}=I_{D2}=I_1 .\n\\]\n\nWith $\\beta_i=\\mu_nC_{ox}(W/L)_i$ and ignoring $\\lambda$,\n\n\\[\nI_1=\\tfrac12\\beta_1V_{OV1}^{2}=\\tfrac12\\beta_2V_{OV2}^{2},\n\\qquad \ng_{mi}=\\frac{2I_1}{V_{OVi}}, \\qquad \nr_{oi}=\\frac{1}{\\lambda_iI_1}.\n\\]\n\nThe required input bias is\n\n\\[\nV_{in,DC}=V_{TH1}+V_{OV1},\n\\]\n\nand the voltage at the internal node $\\,X$ is\n\n\\[\nV_X = V_{b1}-V_{GS2}=V_{b1}-V_{TH2}-V_{OV2}=V_{DS1}.\n\\]\n\nNote that $M_2$ suffers body effect if its bulk is the (grounded) substrate, since $V_{BS2}=-V_X$. Then $V_{TH2}$ is raised and the effective transconductance of $M_2$ is $g_{m2}'=g_{m2}+g_{mb2}$. (If the bulk is tied to its source, use just $g_{m2}$.)\n\nFor both devices to stay in saturation:\n\n* $M_1$: $\\;V_X\\ge V_{OV1}$, i.e. $\\;V_{b1}\\ge V_{OV1}+V_{OV2}+V_{TH2}$,\n* $M_2$: $\\;V_{out}\\ge V_{b1}-V_{TH2}$.\n\nHence the lowest permissible output voltage is $V_{b1}-V_{TH2}$, and the highest is set by the compliance of $I_1$, $V_{DD}-V_{I_1,\\min}$. This extra stacked $V_{GS}$ is the headroom price paid for cascoding. The optimum (lowest) $V_{b1}$ is the value which just keeps $M_1$ saturated.\n\n### 2. Small-signal gain and output resistance\n\nWith $V_{b1}$ at a.c. ground, $M_2$ presents a source-degenerated output looking into its drain. The resistance looking into the drain of the cascode is\n\n\\[\nR_{out,N}=r_{o2}+\\bigl[1+g_{m2}'r_{o2}\\bigr]r_{o1}\n\\;\\approx\\;g_{m2}'\\,r_{o1}r_{o2},\n\\qquad g_{m2}'=g_{m2}+g_{mb2}.\n\\]\n\n$M_1$'s output resistance $r_{o1}$ is boosted by roughly $g_{m2}'r_{o2}$ — this is the main job of $M_2$. The short-circuit transconductance is essentially unchanged, $G_m\\approx g_{m1}$, because the cascode is a near-unity-gain current buffer. Therefore\n\n\\[\n\\boxed{\\,A_v=\\frac{v_{out}}{v_{in}}\\approx -g_{m1}\\Bigl(R_{out,N}\\,\\big\\|\\,R_{I_1}\\Bigr)\\,}\n\\]\n\nwhere $R_{I_1}$ is the finite output resistance of the current source $I_1$. For an ideal $I_1$ ($R_{I_1}\\!\\to\\!\\infty$) this reduces to $A_v\\approx-g_{m1}g_{m2}'r_{o1}r_{o2}$: compared with a simple common-source stage ($-g_{m1}r_{o1}$), the gain is multiplied by $\\approx g_{m2}'r_{o2}$, the intrinsic gain of $M_2$. In practice a real (e.g. PMOS) current source will limit $R_{out}$ to $R_{out,N}\\|R_{I_1}$.\n\nOther terminal properties:\n\n* **Input resistance:** $R_{in}\\approx\\infty$ (gate of $M_1$); at high frequency it is capacitive.\n* **Resistance at node $X$:** looking into the source of $M_2$,\n  \\[\n  R_X=r_{o1}\\;\\Big\\|\\;\\frac{R_{I_1}+r_{o2}}{1+g_{m2}'r_{o2}}\\;\\approx\\;\\frac{1}{g_{m2}'}\n  \\]\n  for a practical (finite) load. $X$ is therefore a low-impedance node.\n\n### 3. Why the cascode is used\n\n* **High gain / high $R_{out}$**, as above, without a larger load resistor.\n* **Suppressed Miller effect.** The gain from the input to $M_1$'s drain (node $X$) is only\n  \\[\n  \\frac{v_x}{v_{in}}\\approx-\\frac{g_{m1}}{g_{m2}'}\\approx -1,\n  \\]\n  instead of the full $|A_v|$. Hence $C_{gd1}$ is multiplied by $\\approx(1+g_{m1}/g_{m2}')\\approx2$, not by $(1+|A_v|)$, so $C_{in}\\approx C_{gs1}+C_{gd1}(1+g_{m1}/g_{m2}')$ is small and the input pole stays high.\n* **High-frequency pole at $X$:** $\\omega_{pX}\\approx g_{m2}'/C_X$ with $C_X\\approx C_{db1}+C_{gs2}+C_{sb2}+C_{gd1}$. Since $R_X$ is small this pole is far out; the dominant pole is normally at the output, $\\omega_{p,out}\\approx1/(R_{out}C_L)$.\n* **Noise:** the input-referred noise is dominated by $M_1$ (and by $I_1$, referred back through $g_{m1}$). $M_2$'s noise is source-degenerated by $r_{o1}$ and contributes negligibly.\n\n### 4. Summary\n\n| Property | Result |\n|---|---|\n| Topology | NMOS telescopic cascode CS stage, active load $I_1$ |\n| Bias current | $I_1$ in both $M_1$, $M_2$ |\n| Voltage gain | $-g_{m1}\\bigl(g_{m2}'r_{o1}r_{o2}\\;\\|\\;R_{I_1}\\bigr)$ |\n| Output resistance | $\\approx g_{m2}'r_{o1}r_{o2}\\;\\|\\;R_{I_1}$ |\n| Input resistance | $\\approx\\infty$ (capacitive) |\n| Min. output voltage | $V_{b1}-V_{TH2}$ |\n| Main cost | Reduced swing/headroom, extra bias $V_{b1}$ |\n\nIn short: $M_1$ converts $v_{in}$ to a current, $M_2$ passes that current to the output while shielding $M_1$ from $v_{out}$ and boosting the output resistance by $\\sim g_{m2}'r_{o2}$. The result is a much higher-gain, wider-bandwidth inverting amplifier than a single common-source device, at the expense of output swing.",
        "format": "markdown",
        "sha256": "ac6c0ebde2de3915dc3bd6746c8266a6cbf99efbb41ba1b0e5864f6c5324113c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the input common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. The explicit full-credit rule applies; ancillary overstatements about node X do not reduce the score.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1371,
        "output_tokens": 14575,
        "total_tokens": 15946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1371,
        "output_tokens": 14575,
        "total_tokens": 15946,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS cascode common-source stage.\n$M_{1}$ is the input transconductor, $M_{2}$ is a common-gate\ncascode device, $V_{b1}$ is its gate bias and $I_{1}$ is an\nactive load.  The body of $M_{1}$ is tied to its source, and\nthe body of $M_{2}$ is tied to its source at $X$, so as drawn\n\n$$V_{BS1}=V_{BS2}=0\\qquad\\Longrightarrow\\qquad g_{mb1}=g_{mb2}=0$$\n\ni.e. there is no body effect in $M_{2}$.\n\n### 1.  DC operation\n\n$M_{1}$, $M_{2}$ and $I_{1}$ are in series, hence, neglecting\ngate current,\n\n$$I_{D1}=I_{D2}=I_{1}\\equiv I_{D}$$\n\n$$ \nV_{GS1}=V_{TH1}+V_{ov1},\\qquad \nV_{GS2}=V_{TH2}+V_{ov2}\n$$\n$$V_{ov i}= \\sqrt{\\frac{2I_{D}}{\\mu_nC_{ox}(W/L)_i}}\\;,\\qquad \ng_{mi}=\\frac{2I_D}{V_{ovi}},\\qquad r_{oi}=\\frac1{\\lambda_i I_D} $$\nwith $V_{TH2}=V_{TH0}$, since $V_{BS2}=0$.\n\nNode $X$ is fixed by $M_{2}$ acting as a source follower for\ndc:\n$$\nV_X = V_{b1}-V_{GS2}=V_{b1}-V_{TH2}-V_{ov2}=V_{DS1}.\n$$\n$M_{1}$ in saturation requires $V_{DS1}\\ge V_{ov1}$, i.e.\n\n$$\nV_{b1}\\ge V_{ov1}+V_{ov2}+V_{TH2}.\n$$\n\n$M_{2}$ in saturation requires $V_{DS2}\\ge V_{ov2}$, i.e.\n\n$$\nV_{out}\\ge V_X+V_{ov2}=V_{b1}-V_{TH2}.\n$$\n\nIn addition $V_{out}$ must leave compliance for the real\ndevice implementing $I_{1}$, $V_{out}\\le V_{DD}-V_{I1}$.\nChoosing $V_{b1}$ at its minimum value maximises swing:\nthe lowest permissible output is approximately\n$V_{ov1}+V_{ov2}$, which is the headroom penalty of the\ncascode over a simple common-source stage.\n\n### 2.  Small-signal gain and resistances\n\nLet $R_{L}$ be the (finite) small-signal resistance of the\nrealisation of $I_{1}$, in parallel with any external load.\nThe small-signal drain current of $M_{2}$ is\n$i_{d2}=-g_{m2}v_x+(v_{out}-v_x)/r_{o2}$, since its gate is at\nac ground and $v_{bs2}=0$, and $i_{d1}=g_{m1}v_{in}+v_x/r_{o1}$,\nwith $i_{d1}=i_{d2}$.\n\nThe resistance looking into the drain of the cascode,\n$v_{in}=0$, is the common-gate resistance boosted by\nsource degeneration $r_{o1}$:\n\n$$\n\\,R_{\\rm down}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\n      \\approx g_{m2}r_{o1}r_{o2}\\,\\qquad g_mr_o\\gg1\n$$\n\ni.e. about $g_{m2}r_{o2}$ times the $r_{o1}$ of a simple CS\nstage.  Hence\n\n$$\nR_{out}=R_{\\rm down}\\,\\|\\,R_{L}.\n$$\n\nThe short-circuit transconductance is essentially $g_{m1}$,\nso, to the usual $1/g_mr_o$ accuracy,\n\n$$\n\\,A_v=\\frac{v_{out}}{v_{in}}\\approx -\\,g_{m1}\\bigl(R_{\\rm down}\\|R_L\\bigr)\\,\n$$\n\n$$\nR_{in}\\approx\\infty\\quad\\text{(gate input).}\n$$\n\nFor the idealised load drawn, $R_L\\to\\infty$, \n$$\nA_v=-g_{m1}r_{o1}\\bigl(1+g_{m2}r_{o2}\\bigr)\\approx\n-\\,(g_{m1}r_{o1})(g_{m2}r_{o2}), \n\\qquad R_{out}\\approx g_{m2}r_{o1}r_{o2},\n$$\nof the order of the square of the intrinsic gain $g_mr_o$.\nPhysically $M_{1}$ gives gain to $X$ and the CG device\ngives further gain to the output.\n\nIn practice $R_L$ is, e.g., the $r_o$ of a PMOS current\nsource.  Then $R_{out}\\approx R_L$ and $A_v\\approx -g_{m1}R_L$:\nthe full benefit is obtained only if the load is also\ncascoded, as in a telescopic-cascode op-amp.\n\nThe impedance at the intermediate node is low for a\nrealistic $R_L$,\n$$\nR_X = r_{o1}\\left\\|\\frac{R_L+r_{o2}}{1+g_{m2}r_{o2}}\n      \\approx r_{o1}\\right\\|\\frac1{g_{m2}},\n$$\nso $v_x/v_{in}=-g_{m1}R_X$ is small, of order $-g_{m1}/g_{m2}$.\nThis is the well known shielding action of the cascode:\n$V_X$ is almost fixed, the Miller multiplication of\n$C_{gd1}$ is greatly reduced, reverse isolation is good,\nand bandwidth is much better than a simple CS stage with\nthe same gain.\n\n### 3.  Frequency response, swing and practical remarks\n\nDominant pole, at the high-impedance output node:\n$$\n\\omega_{p,out}\\approx\n\\frac{1}{R_{out}\\,(C_{db2}+C_{gd2}+C_{I1}+C_L)} ,\n\\qquad\\text{GBW}\\approx \\frac{g_{m1}}{C_L}\\; .\n$$\nNon-dominant pole at $X$:\n$$\n\\omega_{pX}\\approx\n\\frac{1}{R_X\\,(C_{db1}+C_{gs2}+C_{sb2}+C_{gd1})},\n$$\nnormally at high frequency because $R_X\\sim1/g_{m2}$.\nThe input pole is set by the source resistance and\n$C_{gs1}+C_{gd1}(1-v_x/v_{in})$.\n\nInput-referred noise is dominated by $M_{1}$ and by the\nload $I_{1}$; the noise of the cascode device $M_{2}$ is\ndegenerated by $r_{o1}$ and is largely suppressed at low\nfrequencies.  $V_{b1}$ must be a clean ac ground, as noise\non it is transmitted to the output through $g_{m2}$.\n\nRemarks:\n\n* High gain and high $R_{out}$, good isolation and\nbandwidth, at the cost of at least $V_{ov1}+V_{ov2}$\n(plus load) of output headroom and a bias $V_{b1}$.\nOpen-loop dc $V_{out}$ is ill-defined with two high\nimpedance devices in series: $I_{1}$ must accurately match\nthe current set by $V_{in}$, otherwise the stage saturates.\n* Tying the body of $M_{2}$ to $X$ removes the body effect,\nkeeps $V_{TH2}$ low and saves headroom, at the price of\n$R_{\\rm down}\\propto g_{m2}$ rather than $g_{m2}+g_{mb2}$.\nIn a standard $p$-substrate CMOS process NMOS bodies are\nthe common substrate and cannot be tied separately to $X$;\nthis connection requires discrete devices, triple-well or\nSOI. With body to ground, replace $g_{m2}$ by $g_{m2}+g_{mb2}$\nin $R_{\\rm down}$ and use the body-effected $V_{TH2}(V_X)$.",
        "format": "markdown",
        "sha256": "9177ee4cdf451f227e2c3f6258b9762adc2a69cabd602f3cd9183adc214b75e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source input NMOS and M2 as the common-gate NMOS cascode, and gives the required finite-load and ideal-load gain forms. Omitting body effect is explicitly acceptable; the extra body-connection and practical remarks do not change the essential answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1371,
        "output_tokens": 13060,
        "total_tokens": 14431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11069,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1371,
        "output_tokens": 13060,
        "total_tokens": 14431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11069,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. At first glance it looks stacked like a telescopic cascode, but the transistor symbols show otherwise.\n\nA cascode is a **common-source device driving a common-gate device**: the input transistor's *drain* feeds the CG transistor's source.\n\nLook at the arrow, which marks the source terminal:\n\n* **$M_2$:** the arrow is on the lower terminal and points away from the channel $\\;\\Rightarrow\\;$ NMOS. Its source is the lower terminal, its drain goes to $R_D$, and its gate is at a fixed bias $V_{b1}$. So $M_2$ is indeed a common-gate device.\n\n* **$M_1$:** the arrow is on the *upper* terminal and points toward the channel $\\;\\Rightarrow\\;$ PMOS. Its source is the upper terminal, and its drain is the lower terminal — connected to ground.\n\nSo the two sources meet at the intermediate node. $M_1$ has its drain at ac ground, its gate driven by $V_{in}$, and its source delivering the signal: $M_1$ is a **common-drain (source-follower)** device, not a common-source device.\n\nThe circuit is therefore a **CD–CG pair** — a source follower driving a common-gate transistor — not a CS–CG cascode. Consistently, it is non-inverting, with (neglecting $r_o$)\n\n$$A_v \\approx +\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,g_{m2}R_D,$$\n\nrather than the inverting $\\approx -g_{m1}R_D$ behavior of a true cascode.",
        "format": "markdown",
        "sha256": "27e7c1f81bad51603af0efcf5f19cc1cc048c6aa1153c30c80424ff95e3129dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower with its drain grounded and M2 as common-gate, so this is a CD–CG pair rather than a CS–CG cascode. The added non-inverting gain description is consistent with that topology.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1474,
        "output_tokens": 19294,
        "total_tokens": 20768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18761,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1474,
        "output_tokens": 19294,
        "total_tokens": 20768,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18761,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. A cascode is a common-source device stacked on a\ncommon-gate device: the intermediate node is the **drain**\nof the input transistor and the **source** of the upper\ntransistor.\n\nLook at the source arrows in the figure. The node between\n$M_1$ and $M_2$, call it $X$, is\n\n* the source of $M_2$ — as required for a common-gate device,\n  gate at the a.c. ground $V_{b1}$, drain delivering the signal\n  to $R_D$;\n* but also the **source of $M_1$**. The other terminal of\n  $M_1$, tied to ground, is its drain.\n\nHence $M_1$ is not a common-source input device. With $V_{in}$\non its gate, its drain at a.c. ground and its output taken at\nits source at $X$, $M_1$ is a common-drain device, i.e. a source\nfollower, driving the common-gate device $M_2$.\n\nIt is a CD–CG cascade, not the CS–CG cascode. In particular\nit is non-inverting, with approximately, for identical devices\nand neglecting $r_o$,\n$$ \\frac{V_{out}}{V_{in}}\\approx\n\\frac{g_{m1}}{g_{m1}+g_{m2}}\\,g_{m2}R_D \\approx +\\tfrac12 g_mR_D ,$$\ninstead of the cascode's $-g_mR_D$ behaviour.",
        "format": "markdown",
        "sha256": "402136d79536f9a948d810cce7a0b129fbea2c4a4c82dd86fcdc8c0dbd2f706d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with its drain grounded and M2 as common-gate, so this is not a conventional CS–CG cascode. The stated non-inverting gain trend is also consistent with that topology.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1474,
        "output_tokens": 10216,
        "total_tokens": 11690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1474,
        "output_tokens": 10216,
        "total_tokens": 11690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. A cascode is a common-source device whose **drain**\ndrives the **source** of a common-gate device.\n\nLook at the arrowed terminal of each device: it is the source,\nthe direction of the arrow giving the channel type.\n\n* $M_{2}$: arrow at the lower terminal, pointing away from the\ngate - NMOS. Drain up to $V_{out}$, source down to the internal\nnode. With $V_{b1}$ at a-c ground it is a common-gate device.\n\n* $M_{1}$: arrow at the **upper** terminal, pointing toward the\ngate - PMOS. Source up to the internal node, drain down to ground.\n\nHence the internal node is a source-to-source connection, not\nthe drain-to-source connection of a cascode. $M_{1}$ has its drain\nat a-c ground and delivers signal from its source: it is a\ncommon-drain, i.e. source-follower, device driving the\ncommon-gate $M_{2}$.\n\nIn particular the stage is non-inverting, to first order\n\n$$A_{v}\\approx +\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_{D},$$\n\nrather than the $-g_{m1}R_{D}$ of a CS-CG cascode.",
        "format": "markdown",
        "sha256": "c0413fa6b3443518d9e834b06d378f3d4c2f713de124bd8dd779fac5f00bdd2b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as common-gate and M1 as a PMOS source follower with its drain grounded, so the circuit is not a cascode. The stated non-inverting gain is consistent with the topology.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1474,
        "output_tokens": 19373,
        "total_tokens": 20847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18894,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1474,
        "output_tokens": 19373,
        "total_tokens": 20847,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18894,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a single common-source (or common-emitter) stage, the\ncapacitance between input and output, $C_{gd}$ ($C_{bc}$), is\nMiller-multiplied:\n\n$$C_{in} = C_{gs} + C_{gd}\\bigl(1-A_v\\bigr),\\qquad \nA_v=\\frac{v_d}{v_g}\\approx -g_m R_D$$\n\nIf $|A_v|=50$, $C_{gd}$ appears $51\\times$ larger at the input.\nPhysically, the drain swings large and opposite to the gate, so\n$C_{gd}$ must be charged through a voltage $v_g-v_d\\approx 51v_g$.\n\nA cascode splits this gain into two parts:\n\n```\n        VDD\n         |\n         RL\n         +---- vout       <- large swing, high impedance\n         D\n  vbias -M2  common-gate\n         S\n         +---- vx         <- small swing, low impedance\n         D\n   vin  -M1  common-source\n         S\n         |\n        GND\n```\n\n### 1. The input transistor sees a low load\n\nThe impedance looking into the source of the CG device $M_2$ is\napproximately\n\n$$R_x \\approx \\frac{1}{g_{m2}+g_{mb2}}$$\n\ni.e. $\\sim 1/g_m$, not $R_L$. So the voltage gain across $C_{gd1}$,\nfrom gate of $M_1$ to its own drain, is only\n\n$$A_x=\\frac{v_x}{v_{in}}\\approx\n-g_{m1}\\left(r_{o1}\\,\\Big\\|\\,\\frac{1}{g_{m2}+g_{mb2}}\\right)\n\\approx -\\frac{g_{m1}}{g_{m2}+g_{mb2}}\\approx -1$$\n\nfor matched devices carrying the same current. The drain of $M_1$\nbarely moves — $M_2$ essentially clamps it.\n\n### 2. Miller multiplication of $C_{gd1}$ collapses\n\n$$C_{in}\\approx C_{gs1}+C_{gd1}\\bigl(1-A_x\\bigr)\n\\approx C_{gs1}+2\\,C_{gd1}$$\n\ninstead of $C_{gs}+C_{gd}(1+g_mR_D)$. The intermediate node also\nhas a low resistance $\\sim 1/g_{m2}$, so its pole is at high frequency.\n\n### 3. The large gain happens where it does no Miller harm\n\n$M_2$ passes $M_1$'s drain current (unity current gain) to the\nhigh-impedance output node, giving the overall gain\n\n$$A_v \\approx -g_{m1}\\,(R_{out,cascode}\\parallel R_L),$$\n\nstill large. But this swing is at the drain of $M_2$. Its $C_{gd2}$\nconnects output to its gate, which is at AC ground — it is simply\npart of the output load capacitance, not fed back to the input.\nThe grounded gate of $M_2$ *shields* $M_1$ from the output swing.\n\n**In short:** Miller effect depends on the gain *across the\nfeedback capacitor*, not the overall gain. In a cascode that local\ngain is $\\approx -1$ because the input device drives the low\n$1/g_m$ impedance of a common-gate device, so $C_{gd}$ is multiplied\nby $\\approx 2$ instead of by $1+|A_v|$, and the input pole moves to\nmuch higher frequency.",
        "format": "markdown",
        "sha256": "92982ffd7628677fffacc15b80dd5dfdf4bb85f0da683807ff982d1782e071dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s low-impedance source node, derives a local gain near −1, and shows that Cgd1 is multiplied by about 2 rather than by the full-stage gain. It also distinguishes this from the large overall output gain. The phrase that the drain “barely moves” is loose, but the answer’s equations make clear that the Miller effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 4884,
        "total_tokens": 4905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 4884,
        "total_tokens": 4905,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3996,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a single common-emitter/common-source stage, the\ncollector-base (drain-gate) capacitance $C_{\\mu}$ resp. $C_{gd}$\nconnects a node with large inverting swing back to the input.\n\nBy Miller's theorem it appears at the input as\n\n$$C_{in}=C_{\\pi}+C_{\\mu}\\bigl(1-A_v\\bigr),\\qquad \nA_v=\\frac{v_c}{v_b}=-g_m R_C$$\n\nso for $|A_v|\\gg 1$\n\n$$C_{in}\\approx C_{\\pi}+C_{\\mu}\\,(1+|A_v|) .$$\n\nExample: $|A_v|=100$, $C_{\\mu}=10\\,$fF gives $ \\approx 1\\,$pF of\nMiller capacitance. The physical reason: $v_{bc}=v_b-v_c=\nv_b(1+|A_v|)$, so the input source must supply $\\sim 101\\times$\nthe charge $C_\\mu v_b$.\n\n### What the cascode does\n\nStack a common-base/common-gate device $Q_2$ on top of the\ninput device $Q_1$. $Q_1$ no longer drives $R_C$; it drives the\nemitter/source of $Q_2$, whose input resistance is very low:\n\n$$R_{in,2}\\approx \\frac{1}{g_{m2}+g_{mb2}+g_{o1}+g_{o2}}\\approx\\frac1{g_m}.$$\n\nHence the voltage gain *of the first device alone*, i.e. the\ngain across its own feedback capacitance, is only\n\n$$A_{v1}=\\frac{v_{x}}{v_{in}}=-g_{m1}R_{in,2}\n= -\\,\\frac{g_{m1}}{g_{m2}+g_{mb2}+\\cdots}\\approx -1$$\n\nfor matched devices, where $x$ is the intermediate\ncollector-drain node of $Q_1$.\n\nTherefore the Miller multiplication for $C_{\\mu1}/C_{gd1}$ is\n\n$$C_{in}=C_{\\pi1/gs1}+C_{\\mu1/gd1}\\,(1-A_{v1})\n\\;\\approx\\; C_{\\pi1/gs1}+2\\,C_{\\mu1/gd1},$$\n\ninstead of $C_{\\pi}+(1+g_mR_C)C_{\\mu}$. The intermediate node $x$\nbarely moves, so $Q_1$'s collector-base voltage barely changes\nand little extra charge is drawn from the input.\n\n### You still get the overall gain\n\nAlmost all of $Q_1$'s signal current is passed by $Q_2$\n($\\alpha\\approx 1$ current gain) to the load at the output.\nThe total gain is still large,\n\n$$A_v \\approx -g_{m1}\\,(R_{out}\\,\\|\\,R_C),\\qquad \nR_{out}\\sim g_{m2}r_{o2}r_{o1},$$\n\nbut this large output swing does *not* feed back to the input:\n\n* For $Q_2$, the base/gate is at AC ground, so $C_{\\mu2}/C_{gd2}$\n  connects output to ground, not output to input. It simply adds\n  (unmultiplied) to the output capacitance.\n* $Q_2$ thus *shields* $Q_1$ from the output swing.\n\nThe pole at the intermediate node is also high in frequency,\nsince its resistance is $\\approx 1/g_{m2}$ while its capacitance\nis only $C_{\\mu1}+C_{\\pi2}$ etc.:\n\n$$\\omega_{p,x}\\approx \\frac{g_{m2}}{C_x}\\;\\text{(large)}.$$\n\nIn short: a cascode separates the job of *transconductance*\n($Q_1$) from the job of *voltage gain* (done at the high-impedance\noutput node through $Q_2$). $Q_1$ sees only a $\\sim 1/g_m$ load,\nso its local gain is $\\sim -1$ and its Miller factor is $\\sim 2$,\nnot $\\sim 1+|g_m R_C|$.",
        "format": "markdown",
        "sha256": "04b6769d1a2893fbd25f535db6cd121d90f40c943392889ae021dfd564e4eb24"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and derives a local gain near −1, giving a Miller factor of about 2 rather than the full-stage gain. Saying the node and capacitor voltage barely move overstates the reduction, but the golden solution treats that as a minor flaw.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2678,
        "total_tokens": 2699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1723,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 2678,
        "total_tokens": 2699,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1723,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In a single common-source stage, the gate-drain capacitance $C_{gd}$ connects the input node to a node that swings a lot — the drain. By the Miller theorem, a capacitance $C$ bridging an amplifier of voltage gain $A_v$ looks, at the input, like\n\n$$C_{in,Miller} = C_{gd}\\,(1 - A_v)$$\n\nFor a common-source device, $A_v = -g_m R_D$, so\n\n$$C_{in} \\approx C_{gs} + C_{gd}\\bigl(1 + g_m R_D\\bigr)$$\n\nIf $g_m R_D = 50$, $C_{gd}$ is multiplied by $\\sim 51$. That huge input capacitance, interacting with the source resistance, is what kills the bandwidth.\n\n### What changes in a cascode\n\nA cascode stacks a common-gate device $M_2$ on top of the common-source input device $M_1$. The key point is this:\n\n> $C_{gd1}$ is **not** connected between the input and the overall output. It is connected between the input (gate of $M_1$) and the *intermediate* node $X$ (drain of $M_1$ / source of $M_2$). So the Miller multiplier depends on the gain from gate to node $X$, not on the total gain of the cascode.\n\nThat gain to node $X$ is small, because node $X$ is a low-impedance node. Looking into the source of a common-gate device,\n\n$$R_{in,CG} \\approx \\frac{1}{g_{m2}+g_{mb2}}$$\n\nso the resistance at the drain of $M_1$ is\n\n$$R_X = r_{o1} \\,\\Big\\|\\, R_{in,CG} \\approx \\frac{1}{g_{m2}+g_{mb2}}$$\n\nHence the voltage gain from the input to $M_1$'s own drain is only\n\n$$A_{v1} = \\frac{V_X}{V_{in}} = -g_{m1} R_X \\approx -\\frac{g_{m1}}{g_{m2}+g_{mb2}} \\approx -1$$\n\nfor similarly sized and biased devices (ignoring body effect, exactly $-g_{m1}/g_{m2}$). The Miller factor for $C_{gd1}$ therefore drops from $(1+g_m R_D)$ to roughly\n\n$$1 - A_{v1} \\approx 1 + \\frac{g_{m1}}{g_{m2}} \\approx 2$$\n\nand the input capacitance becomes just\n\n$$C_{in} \\approx C_{gs1} + 2C_{gd1}$$\n\n### Where did the overall gain go?\n\nIt hasn't been lost — it's been *relocated*. $M_1$ acts mainly as a transconductor, converting $V_{in}$ into a drain current. $M_2$ acts as a current buffer: it passes that current (almost unchanged) up to the high-impedance output node, where the large voltage swing develops across $R_{out} \\approx g_{m2}r_{o2}r_{o1} \\parallel R_D$.\n\nIntuitively, $M_2$ **shields** $M_1$: it holds the drain voltage of $M_1$ nearly constant (any change in $M_1$'s current is absorbed by $M_2$ rather than moving $V_X$ much), even while the output node swings widely. Since $M_1$'s drain barely moves, $C_{gd1}$ carries little feedback current, and the Miller multiplication collapses.\n\nTwo secondary benefits follow:\n\n- **$C_{gd2}$ gets no Miller multiplication at all**, because the gate of $M_2$ is at AC ground — it merely loads the output node.\n- **The pole at node $X$ is at high frequency**, since $R_X \\approx 1/g_{m2}$ is small, so that node doesn't limit bandwidth either.\n\nSo the cascode trades nothing in transconductance: you keep the full overall gain $\\approx -g_{m1}R_{out}$, but the capacitance that suffers Miller multiplication only \"sees\" a gain of about $-1$.",
        "format": "markdown",
        "sha256": "3c918459d08ec649b10e509a6dabc507991ec07b6593307ded913e072a52613a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node and derives a gate-to-drain gain near −1, so Cgd1 is multiplied by about 2 rather than by the cascode’s full gain. The description of the drain as barely moving is somewhat emphatic, but the quantitative explanation makes clear the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 4091,
        "total_tokens": 4112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3066,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 21,
        "output_tokens": 4091,
        "total_tokens": 4112,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3066,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a single ended common-gate stage.\n$M_{2}$ is the amplifying device and $M_{1}$ is its\nactive load.\n\nFor $M_{2}$\n\n* gate: $V_{b1}$, a.c. ground\n* drain: $V_{out}$\n* source: $V_{in}$\n* body: tied to the source\n\nFor $M_{1}$, a PMOS,\n\n* gate: $V_{b2}$, a.c. ground\n* source and body: $V_{DD}$, a.c. ground\n* drain: $V_{out}$\n\nHence the signal enters the source of $M_{2}$, the gate\nis at fixed bias, and the signal is taken from the drain.\n$M_{1}$ carries the same d.c. current as $M_{2}$ and\npresents only its output resistance to the signal at\nthe output node.\n\n### Bias\n\nNeglecting $\\lambda$ for the bias point,\n\n$$\nI_D=\\frac12\\mu_nC_{ox}\\Bigl(\\frac WL\\Bigr)_2\n      \\bigl(V_{b1}-V_{in}-V_{THN}\\bigr)^2\n    =\\frac12\\mu_pC_{ox}\\Bigl(\\frac WL\\Bigr)_1\n      \\bigl(V_{DD}-V_{b2}-|V_{THP}|\\bigr)^2\n$$\n\n$V_{b2}$ must be chosen so that the PMOS current source\nsupplies exactly the current demanded by $M_{2}$ at the\nd.c. value of $V_{in}$. $V_{out}$ takes the value that\nallows the two currents to be equal.\n\nFor both devices to remain in saturation\n\n$$\\begin{aligned}\nM_{2}:&\\quad V_{out}-V_{in}\\ge \n      \\bigl(V_{b1}-V_{in}\\bigr)-V_{THN}\n      &&\\Longleftrightarrow\\quad V_{out}\\ge V_{b1}-V_{THN}\\\\\nM_{1}:&\\quad V_{DD}-V_{out}\\ge \n      \\bigl(V_{DD}-V_{b2}\\bigr)-|V_{THP}|\n      &&\\Longleftrightarrow\\quad V_{out}\\le V_{b2}+|V_{THP}|\n\\end{aligned}$$\n\nso the useful output swing is\n$V_{b1}-V_{THN}\\lesssim V_{out}\\lesssim V_{b2}+|V_{THP}|$.\n\nBecause the body of $M_{2}$ is tied to its source,\n$V_{BS2}=0$ at all signal levels. There is therefore\nno body effect in $M_{2}$,\n\n$$\ng_{mb2}=0,\\qquad V_{THN}={\\rm const}\n$$\n\nat the expense of requiring an isolated $p$-well for\n$M_{2}$. $M_{1}$ is in its own $n$-well in the usual way.\n\n### Small-signal gain\n\nWith $V_{b1}$ and $V_{b2}$ a.c. ground, the small-signal\nmodel consists of $M_{2}$ with $v_{gs2}=-v_{in}$,\n$v_{bs2}=0$, $r_{o2}$ between output and input, and\n$M_{1}$ reduced to $r_{o1}$ from $V_{DD}$ (a.c. ground)\nto the output.\n\nKCL at the output node,\n\n$$\ng_{m2}(-v_{in})+\\frac{v_{out}-v_{in}}{r_{o2}}\n      +\\frac{v_{out}}{r_{o1}}=0\n$$\n\ngives\n\n$$\n \\frac{v_{out}}{v_{in}}\n      =\\bigl(g_{m2}+g_{ds2}\\bigr)\\,\n        \\bigl(r_{o1}\\parallel r_{o2}\\bigr)  >0\n$$\n\ni.e. approximately, for $g_{m2}r_{o2}\\gg1$,\n\n$$\nA_v \\approx g_{m2}\\,\\bigl(r_{o1}\\parallel r_{o2}\\bigr)\n$$\n\nThe gain is non-inverting. $g_{m1}$ does not appear:\n$M_{1}$ is not signal driven, it is only a current-source\nload of resistance $r_{o1}$. An external load $R_L$\nsimply appears in parallel with $r_{o1}$ and $r_{o2}$.\n\n### Input resistance\n\nApplying a test voltage at the source, with the drain\nloaded by $r_{o1}$,\n\n$$\n R_{in}= \\frac{v_{in}}{i_{in}}\n       =\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}\n       \\approx \\frac{1}{g_{m2}}\n         \\left(1+\\frac{r_{o1}}{r_{o2}}\\right) \n$$\n\nFor a low resistance drain load this reduces to the\nfamiliar $\\approx 1/g_{m2}$ of a common-gate device.\nWith the high resistance active load here $R_{in}$ is\nsomewhat larger; e.g. for $r_{o1}=r_{o2}$, $R_{in}\\approx\n2/g_{m2}$ and $A_v\\approx g_{m2}r_{o2}/2$. This is the\ncharacteristic low input resistance of the CG stage,\nuseful for current-mode inputs and for $50\\,\\Omega$\ntermination. If the input is driven through $R_{sig}$,\nthe gain from the source is $A_v R_{in}/(R_{in}+R_{sig})$.\n\n### Output resistance\n\nWith the input source shorted for resistance\ncalculation, looking into the drain of $M_{2}$ gives\n$r_{o2}$, in parallel with $r_{o1}$ from $M_{1}$:\n\n$$\nR_{out}\\approx r_{o1}\\parallel r_{o2}\n$$\n\nIn general, with a source resistance $R_{sig}$ at the\ninput, the resistance looking into the drain of $M_{2}$\nis boosted to $r_{o2}+R_{sig}+g_{m2}r_{o2}R_{sig}$, and\nthis is in parallel with $r_{o1}$.\n\n### Remarks\n\nThe grounded gate shields input from output, so\n$C_{gd2}$ is not Miller multiplied. The low $R_{in}$\nmakes the input pole high in frequency, and the\ndominant pole is normally at the output,\n$\\omega_{p,out}\\approx 1/[(r_{o1}\\!\\parallel\\! r_{o2})C_L]$.\nThe stage therefore has wide bandwidth and good reverse\nisolation, at the cost of low input resistance, limited\nheadroom set by the two saturation conditions above,\nand noise contributions from both $M_{2}$ and the PMOS\nload $M_{1}$.",
        "format": "markdown",
        "sha256": "e27e53cd8e691209a11b183bce5471f45bdf8b421502660f0acdae45998524fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS stage, source input, bias voltages, non-inverting gain, low input resistance, and the required gain expression. The additional body-tie assumption does not contradict the essential topology or gain mechanism.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1289,
        "output_tokens": 9412,
        "total_tokens": 10701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1289,
        "output_tokens": 9412,
        "total_tokens": 10701,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7751,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_{1}$ is $p$--channel, $M_{2}$ is $n$--channel.\nFor $M_{1}$ the source and the bulk go to $V_{DD}$, for\n$M_{2}$ the bulk is tied to the source.  Hence, as drawn,\nthere is no bulk effect in either device, $v_{bs}\\equiv 0$.\n$V_{b1}$ and $V_{b2}$ are d-c biases, i.e. a-c ground.\n\nThe signal is applied to the source of $M_{2}$, its gate\nbeing fixed, its drain driving the output node.  $M_{1}$,\nwith fixed $v_{sg}$, is simply the active load in the drain\nof $M_{2}$.  It is a common gate stage with a $p$MOS current\nsource load.  The signal source must sink the d-c drain\ncurrent of $M_{2}$.\n\n### Bias\n\nIn the quiescent state $I_{D1}=I_{D2}=I_{D}$, with, $\\lambda\\ne 0$\nin general,\n\n$$ \nI_D\\approx \\tfrac12\\mu_nC_{ox}\\Bigl(\\frac WL\\Bigr)_2\n      \\bigl(V_{b1}-V_{in,Q}-V_{thn}\\bigr)^{2}(1+\\lambda_nV_{DS2})\n     =\\tfrac12\\mu_pC_{ox}\\Bigl(\\frac WL\\Bigr)_1\n      \\bigl(V_{DD}-V_{b2}-|V_{thp}|\\bigr)^{2}(1+\\lambda_pV_{SD1})\n$$\n\n$V_{out,Q}$ settles where the two currents are equal.\nSaturation of $M_{2}$ and of $M_{1}$ requires\n\n$$V_{DS2}\\ge V_{GS2}-V_{thn},\\qquad \n  V_{SD1}\\ge V_{SG1}-|V_{thp}|$$\n\ni.e. for the (small signal) output voltage\n\n$$ V_{b1}-V_{thn}\\;\\lesssim\\;V_{out}\\;\\lesssim\\;V_{b2}+|V_{thp}| $$\n\nwhich is the useful output swing.  Also\n$V_{in,Q}<V_{b1}-V_{thn}$ for $M_{2}$ to be on.\n\n### Small signal voltage gain\n\nFor $M_{1}$, $v_{sg1}=0$ (gate and source both a-c ground);\nin small signal it is just $r_{o1}$ from $V_{DD}$ to the\noutput.  For $M_{2}$\n\n$$v_{gs2}=v_g-v_s=-v_{in},\\qquad v_{ds2}=v_{out}-v_{in},\\qquad\n  i_{d2}=g_{m2}v_{gs2}+ \\frac{v_{ds2}}{r_{o2}},\\qquad \n  r_{oi}=\\frac1{\\lambda_i I_D} .$$\n\nKCL at the output node, $i_{d1}=i_{d2}$ with\n$i_{d1}=-v_{out}/r_{o1}$, gives\n\n$$ -\\frac{v_{out}}{r_{o1}}\n      =-g_{m2}v_{in}+\\frac{v_{out}-v_{in}}{r_{o2}} $$\n\n$$\\,A_v=\\frac{v_{out}}{v_{in}}\n      =\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n      =\\frac{\\,1+g_{m2}r_{o2}\\,}{r_{o1}+r_{o2}}\\,r_{o1}\n      \\;\\approx\\;g_{m2}\\,(r_{o1}\\!\\parallel\\! r_{o2})\\,>0 $$\n\nfor $g_{m2}r_{o2}\\gg1$.  The stage is non-inverting:\n$v_{in}\\uparrow\\;\\Rightarrow\\;v_{gs2}\\downarrow\\;\\Rightarrow\\;i_{d2}\\downarrow\\;\n\\Rightarrow$ less drop in $M_{1}$ $\\Rightarrow v_{out}\\uparrow$.\n$g_{m1}$ does not enter to first order; $M_{1}$ contributes\nonly $r_{o1}$.  With $r_{o1}\\to\\infty$, $A_v\\to1+g_{m2}r_{o2}$,\nthe intrinsic gain of $M_{2}$.\n\nRemark: if $M_{2}$'s bulk were a-c ground instead of tied\nto its source, replace $g_{m2}$ by $g_{m2}+g_{mb2}$ in the\napproximate formulae.\n\n### Input and output resistance\n\nThe current drawn, with sign reversed, from the $v_{in}$\nsource is $i_{d2}$.  From above,\n\n$$ \nR_{in}=\\frac{v_{in}}{-i_{d2}}\n     =\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}\n     \\approx\\frac1{g_{m2}}\\Bigl(1+\\frac{r_{o1}}{r_{o2}}\\Bigr)\n$$\n\nin particular $R_{in}\\approx1/g_{m2}$ to zeroth order in\n$\\lambda$ -- the familiar low input resistance of a CG\ndevice, increased somewhat by the large drain load $r_{o1}$.\n\nWith $v_{in}$ shorted,\n\n$$ R_{out}=r_{o1}\\parallel r_{o2} .$$\n\nWith a finite resistance $R_S$ in series with $v_{in}$ the\nresistance looking into the drain of $M_{2}$ is boosted to\n$\\approx r_{o2}+(1+g_{m2}r_{o2})R_S$, in parallel with $r_{o1}$.\n\nHence the circuit is a wide-band, non-inverting voltage\namplifier/current buffer: low $R_{in}\\approx1/g_{m2}$, high\n$R_{out}$, gain $\\approx g_{m2}(r_{o1}\\!\\parallel\\!r_{o2})$, no\nMiller multiplication of $C_{gd2}$.  The dominant pole is\nnormally at the output, $\\approx[(r_{o1}\\!\\parallel\\!r_{o2})C_L]^{-1}$.",
        "format": "markdown",
        "sha256": "8484d8b325728e15859639367729f0a781b9db3b8f6a99cb5a9e33e088ec800c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate NMOS with a PMOS current-source load, its biasing, non-inverting gain, and low input resistance. The gain expression matches the required approximation; minor modeling details do not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1289,
        "output_tokens": 16934,
        "total_tokens": 18223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1289,
        "output_tokens": 16934,
        "total_tokens": 18223,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source-driven common-gate stage\nwith an active load.\n\n$M_{2}$ is NMOS. Its gate is at the fixed bias $V_{b1}$,\nits drain is the output and the signal is applied to its\nsource. Its bulk is tied to its source.\n\n$M_{1}$ is PMOS. Its source and bulk are at $V_{DD}$, its\ngate is at the fixed bias $V_{b2}$ and its drain is the\noutput. For signals $M_{1}$ is therefore not an amplifying\ndevice: $v_{sg1}=0$. It is a current-source load presenting\nonly $r_{o1}$ from $V_{DD}$, ac ground, to the output.\n\nSince the bulk of each device is tied to its source,\n$v_{bs1}=v_{bs2}=0$ and there is no body effect,\n$g_{mb1}=g_{mb2}=0$, for the two devices.\n\n### DC operation\n\nNeglecting second order terms the same current flows in\n$M_{1}$ and $M_{2}$,\n\n$$\n\\begin{aligned}\nI_D&=\\frac{\\beta_n}{2}\\,(V_{b1}-V_{in}-V_{thn})^{2}\n      \\bigl[1+\\lambda_n(V_{out}-V_{in})\\bigr] \\\\\n    &=\\frac{\\beta_p}{2}\\,(V_{DD}-V_{b2}-|V_{thp}|)^{2}\n      \\bigl[1+\\lambda_p(V_{DD}-V_{out})\\bigr] ,\n\\end{aligned}\n$$\n$\\beta=\\mu C_{ox}W/L$.  In practice $V_{b2}$ essentially sets\nthe bias current and $V_{b1}-V_{in}$ sets $V_{GS2}$ to pass\nthat current.  With $\\lambda=0$ the input dc level is pinned to\n\n$$\nV_{in}\\approx V_{b1}-V_{thn}-V_{ov2},\\qquad\nV_{ov2}=\\sqrt{\\frac{2I_D}{\\beta_n}}\\; .\n$$\n\nFor both devices to be saturated\n\n$$\nV_{DS2}\\ge V_{GS2}-V_{thn},\\qquad \nV_{SD1}\\ge V_{SG1}-|V_{thp}|\n$$\n\ni.e.\n\n$$\n\\,V_{b1}-V_{thn}\\;\\le\\;V_{out}\\;\\le\\;V_{b2}+|V_{thp}|\\,\n$$\n\nor, in terms of overdrives,\n\n$$\nV_{in}+V_{ov2}\\le V_{out}\\le V_{DD}-V_{ov1}.\n$$\n\nHence the usable swing is about $V_{DD}-V_{ov1}-V_{ov2}$,\nlarger than in a cascode, at the expense of only one\ndevice's intrinsic gain.\n\nAn increase in $V_{in}$ decreases $V_{GS2}$, decreases\n$I_{D2}$, and the nearly constant current of $M_{1}$ pulls\n$V_{out}$ up: the stage is non-inverting.\n\n### Small-signal gain\n\nFor $M_{2}$, $v_{gs2}=-v_{in}$.  KCL at the output node,\nwith no external load, is\n\n$$\n\\frac{v_{out}}{r_{o1}}-g_{m2}v_{in}\n      +\\frac{v_{out}-v_{in}}{r_{o2}}=0,\n$$\n\nso that\n\n$$\n\\, \n\\frac{v_{out}}{v_{in}}=\n\\frac{g_{m2}+1/r_{o2}}{1/r_{o1}+1/r_{o2}}\n     =\\frac{(g_{m2}r_{o2}+1)\\,r_{o1}}{r_{o1}+r_{o2}}\n     \\;\\approx\\; g_{m2}\\,(r_{o1}\\parallel r_{o2})\\,\n$$\n\nfor $g_mr_o\\gg1$.  The gain is the intrinsic gain of the\nCG device loaded by the output resistance of the PMOS\ncurrent source.  With an external load $R_L$ replace\n$r_{o1}$ by $r_{o1}\\parallel R_L$ and\n\n$$\nA_v\\approx g_{m2}\\,(r_{o1}\\parallel r_{o2}\\parallel R_L).\n$$\n\n$g_{m1}$ does not appear in the signal gain; $M_{1}$\ncontributes only $r_{o1}$, its noise, and supply coupling.\n\n### Input resistance\n\nLooking into the source of a CG device terminated at the\ndrain by $R_L'=r_{o1}$ ($\\,\\parallel R_L$ if present),\n\n$$\n\\,R_{in}= \\frac{R_L'+r_{o2}}{1+g_{m2}r_{o2}}\\,\n\\qquad\\approx\\;\n\\frac{1+R_L'/r_{o2}}{g_{m2}} .\n$$\n\nFor a small drain load this reduces to the familiar\n$R_{in}\\approx1/g_{m2}$.  Here $R_L'=r_{o1}\\sim r_{o2}$,\nso $R_{in}\\approx 2/g_{m2}$ if $r_{o1}\\approx r_{o2}$.\nThis low $R_{in}$ makes the stage useful as a current\nbuffer and for terminating e.g. a $50\\,\\Omega$ source,\n$1/g_{m2}$ being set to the termination value, but it\nloads a preceding voltage source.  Essentially all of the\nsignal current injected into the source appears at the drain.\n\n### Output resistance\n\nWith the input source shorted for signals,\n\n$$\n\\,R_{out}=r_{o1}\\parallel r_{o2}\\,.\n$$\n\nIf the signal source has resistance $R_S$ in series with\nthe source of $M_{2}$, the resistance looking into the\ndrain of $M_{2}$ is boosted to \n$r_{o2}+(1+g_{m2}r_{o2})R_S$, in parallel with $r_{o1}$.\n\n### Frequency response and use\n\nThe gate of $M_{2}$ is at ac ground, so there is no Miller\nmultiplication of $C_{gd2}$. $C_{gd1},C_{gd2},C_{db1},C_{db2}$\nand $C_L$ appear at the output, giving the usual dominant\noutput pole\n\n$$\n\\omega_{p,out}\\approx\n\\frac{1}{(r_{o1}\\parallel r_{o2})C_{out}} .\n$$\n\nThe input pole is at a high frequency because it sees\n$R_S\\parallel R_{in}$, with $R_{in}$ small, times $C_{gs2}$.\n\nIn summary: a wideband, non-inverting, low-input-impedance,\nhigh-output-impedance voltage/current buffer with\n$A_v\\approx g_{m2}(r_{o1}\\parallel r_{o2})$, widely used as\nthe input device of cascodes and low-noise amplifiers.\nIts limitations are the loading of the source, bias\nsensitivity of the source-driven device, output swing\nlimited by the two saturation conditions above, and noise\nand $V_{DD}$ coupling contributed by the PMOS load $M_{1}$.",
        "format": "markdown",
        "sha256": "57bfe3196cd81c88651979a65602b873f3aaeb3a0ab5a108e0961a24eb3dca6f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate NMOS with a PMOS current-source load, gives the non-inverting gain and low input resistance, and identifies the bias voltages. The extra body-effect and swing details do not change the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1289,
        "output_tokens": 14455,
        "total_tokens": 15744,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1289,
        "output_tokens": 14455,
        "total_tokens": 15744,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12739,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The (small signal) nodes that are not a-c ground are\nonly\n\n* $X$ : the gate of $M_{1}$\n* $Y$ : the drain of $M_{1}$ - drain of $M_{2}$, i.e. $V_{out}$\n\nAt $Y$,\n\n$$C_{DB},\\qquad C_{GD2},\\qquad C_{DB2}$$\n\nare all connected between the same pair of a-c nodes, $Y$ and\nground.  They are in parallel,\n\n$$ C_{Y}=C_{DB}+C_{GD2}+C_{DB2}\\qquad Y\\to {\\rm gnd}. $$\n\nThere remains\n\n* $C_{GS}$ : $X\\to {\\rm gnd}$\n* $C_{GD}$ : $X\\to Y$\n* $C_{Y}$  : $Y\\to {\\rm gnd}$\n\ni.e. two independent node voltages $V_X$, $V_Y$.\nThe nodal equations are of the form\n\n$$\n\\begin{bmatrix}\nC_{GS}+C_{GD} & -C_{GD}\\\\[2pt]\n-C_{GD} & C_{Y}+C_{GD}\n\\end{bmatrix}\n\\frac{d}{dt}\n\\begin{bmatrix}V_X\\\\ V_Y\\end{bmatrix}\n+\n\\begin{bmatrix} \\cdot & \\cdot \\\\ \\cdot & \\cdot \\end{bmatrix}\n\\begin{bmatrix}V_X\\\\ V_Y\\end{bmatrix}\n=\n\\begin{bmatrix}V_{in}/R_S\\\\0\\end{bmatrix}\n$$\n\nwith non-singular capacitance matrix. The system is second\norder. In particular $V_{out}/V_{in}$ has a quadratic denominator.\n\n$$2\\ \\text{poles}$$",
        "format": "markdown",
        "sha256": "bfd6cf454c4597ba597d6f80a8ca6cdcd85ccad5218423935c67528bd906b02d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes, assigns the capacitances to the proper nodes, and concludes the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1902,
        "output_tokens": 3566,
        "total_tokens": 5468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3129,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1902,
        "output_tokens": 3566,
        "total_tokens": 5468,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3129,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the small signal model the terminals of $M_{2}$ other than its\ndrain are at a.c. ground.  There are therefore only two\nnon ground signal nodes\n\n* $X$ : the gate of $M_{1}$,\n* $out$ : the common drain of $M_{1}$ and $M_{2}$.\n\nThe five capacitors shown are not independent.\n\nAt the output node\n$$ C_{DB1},\\qquad C_{DB2},\\qquad C_{GD2} $$\nare all connected between $V_{out}$ and a.c. ground.  In parallel\nthey are the single capacitance\n$$ C_{L}=C_{DB1}+C_{DB2}+C_{GD2}\\qquad\\text{from }out\\text{ to ground}. $$\n\nAt the input node $C_{GS1}$ is from $V_{X}$ to ground.\n$C_{GD1}$ is between the two signal nodes, so its voltage is\n$$V_{CGD1}=V_{X}-V_{out},$$\nalready fixed by $V_{X}$ and $V_{out}$.  The voltages across\n$C_{GS1}$ and across $C_{L}$ , i.e. $V_{X}$ and $V_{out}$, are the\nonly independent capacitor voltages; they are the two state\nvariables of the circuit.  The KCL equations at $X$ and at $out$\ngive a denominator quadratic in $s$.\n\nHence the circuit is second order, with 2 poles, despite the\nfive capacitors drawn.",
        "format": "markdown",
        "sha256": "3a0c7d5f0575fa180dbf0593d2004f0082f2b0e9429acea3d58e83889e901863"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate and output as the two independent nodes, assigns the capacitors to the right nodes, and concludes the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1902,
        "output_tokens": 4705,
        "total_tokens": 6607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1902,
        "output_tokens": 4705,
        "total_tokens": 6607,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "There are signal voltages at only two nodes, the gate of\n$M_{1}$ and the output node.\n\nAt the output node\n\n* $C_{DB1}$ is from $V_{out}$ to ground,\n* $C_{DB2}$ is from $V_{out}$ to the a.c. ground at the $M_{2}$ bulk,\n* $C_{GD2}$ is from $V_{out}$ to the a.c. ground at the gate of $M_{2}$,\n\ni.e. the three are in parallel and may be replaced by\n\n$$C_{L}=C_{DB}+C_{DB2}+C_{GD2}\\qquad V_{out}\\to{\\rm gnd} .$$\n\nThere remain $C_{GS}$ from the gate node to ground, $C_{GD}$ from\nthe gate node to $V_{out}$ and $C_{L}$ from $V_{out}$ to ground.\nTheir voltages are not independent,\n$$V_{GD}=V_{GS}-V_{out},$$\nso there are only two independent capacitor voltages, e.g.\n$V_{GS}$ and $V_{out}$.  The small-signal nodal determinant is\nquadratic in $s$.\n\nThe circuit is second order: it has **2 poles**, nominally one\nassociated with the input node and one with the output node.",
        "format": "markdown",
        "sha256": "d32ffd9d3d4a58757171030761caad8fe7fa54b0110a304875555f48b6999510"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the gate and output as the two independent dynamic nodes, assigns the relevant capacitances to them, and concludes the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1902,
        "output_tokens": 3808,
        "total_tokens": 5710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1902,
        "output_tokens": 3808,
        "total_tokens": 5710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two devices are NMOS devices in series between the\nresistive load and ground\n\n$$\nV_{DD}-R_{D}-V_{out}-M_{2}-V_{X}-M_{1}-GND\\qquad \nV_{G1}=V_{G2}=V_{in}\n$$\n\nas drawn the bulks are tied to the respective sources, so\nthere is no body effect. It looks like a cascode, but it is\nnot: the upper gate is not at a fixed a.c. potential, it\nmoves with the input. In fact it behaves, to first order,\nas one composite common-source transistor.\n\nLet \n$$\\beta_i=\\mu_nC_{ox}(W/L)_i\\qquad \nV_{OV}=V_{in}-V_{T}\\;(>0\\;{\\rm for\\;conduction})$$\nand neglect $\\lambda$ for the bias calculation.\n\n### DC behaviour\n\nThe same $I_D$ flows in $M_1$ and $M_2$.\n\n$M_1$ and $M_2$ cannot both be in strong-inversion saturation.\nIndeed $M_1$ in saturation would require\n\n$$V_{DS1}=V_X\\ge V_{GS1}-V_T=V_{OV}\\;\\;\\Longrightarrow\\;\\;\nV_{GS2}=V_{in}-V_X\\le V_T ,$$\n\ni.e. $M_2$ would be off. The self-consistent regime for\n$V_{out}$ sufficiently large is\n\n* $M_1$ in triode,\n* $M_2$ in saturation.\n\nThen\n\n$$\\begin{aligned}\nI_D &=\\beta_1\\!\\left[V_{OV}V_X-\\frac{V_X^{2}}{2}\\right] && M_1\\;{\\rm triode}\\\\\nI_D &=\\frac{\\beta_2}{2}\\bigl(V_{in}-V_X-V_T\\bigr)^{2}\n      =\\frac{\\beta_2}{2}\\bigl(V_{OV}-V_X\\bigr)^{2} && M_2\\;{\\rm sat.}\n\\end{aligned}$$\n\nPut $v=V_{OV}-V_X=V_{GS2}-V_T$. The first equation is\n$I_D=\\tfrac{\\beta_1}{2}(V_{OV}^{2}-v^{2})$. Equating,\n\n$$ \\beta_1V_{OV}^{2}=(\\beta_1+\\beta_2)v^{2},\\qquad \nv=V_{OV}\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}} $$\n\n$$V_{X}=V_{OV}\\left[1-\\sqrt{\\frac{\\beta_1}{\\beta_1+\\beta_2}}\\right],\n\\qquad \nI_D=\\frac12\\beta_{\\rm eff}V_{OV}^{2}$$\n\nwith\n\n$$\\;\\beta_{\\rm eff}= \\frac{\\beta_1\\beta_2}{\\beta_1+\\beta_2}\n      =\\frac{1}{1/\\beta_1+1/\\beta_2}\\; $$\n\ni.e. exactly a single NMOS of transconductance parameter\n$\\beta_{\\rm eff}$. For equal widths $1/\\beta\\propto L$, so\n$L_{\\rm eff}=L_1+L_2$.  For $\\beta_1=\\beta_2=\\beta$,\n\n$$V_X=\\left(1-\\frac1{\\sqrt2}\\right)V_{OV}\\approx0.29V_{OV},\\qquad \nI_D=\\frac{\\beta}{4}V_{OV}^{2},\\qquad \\beta_{\\rm eff}=\\beta/2 .$$\n\nWith the load $$V_{out}=V_{DD}-I_DR_D,$$\nin the composite-saturation region, $V_{out}\\ge V_{in}-V_T$,\n\n$$V_{out}=V_{DD}-\\frac{R_D\\beta_{\\rm eff}}{2}\n      (V_{in}-V_T)^2\\qquad V_{in}>V_T ,$$\n\na normal resistive-load CS transfer characteristic.\nFor $V_{in}<V_T$, $I_D\\approx0$ and $V_{out}\\approx V_{DD}$.\nFor $V_{out}<V_{in}-V_T$, $M_2$ also enters triode and the\ncomposite device is in triode,\n$I_D=\\beta_{\\rm eff}[(V_{in}-V_T)V_{out}-V_{out}^{2}/2]$,\nand the gain collapses. Saturation at the $Q$ point needs\n$V_{outQ}\\ge V_{OVQ}$.\n\n### Small-signal gain and output resistance\n\nAt the $Q$ point above, with $\\lambda$ restored,\n\n$$\\begin{aligned}\ng_{m1}&=\\beta_1V_{XQ}, &\ng_{ds1}&=\\beta_1(V_{OV}-V_{XQ})\\;\\; \\text{(triode, large)},\\\\\ng_{m2}&=\\beta_2(V_{OV}-V_{XQ}), &\ng_{ds2}&=\\lambda_2I_D=1/r_{o2}.\n\\end{aligned}$$\n\nKCL at $X$ and at the output, $i_{d1}=i_{d2}=i_d$,\n\n$$\\begin{aligned}\ni_d &= g_{m1}v_{in}+g_{ds1}v_x\\\\\ni_d &= g_{m2}(v_{in}-v_x)+g_{ds2}(v_{out}-v_x)\n\\end{aligned}$$\n\nEliminating $v_x$,\n\n$$i_d = g_{m,\\rm eff}\\,v_{in}+g_{out,\\rm eff}\\,v_{out}$$\n\n$$\\begin{aligned}\ng_{m,\\rm eff}&=\n\\frac{g_{m1}(g_{m2}+g_{ds2})+g_{m2}g_{ds1}}\n     {\\,g_{m2}+g_{ds1}+g_{ds2}\\,},\\\\[2mm]\ng_{out,\\rm eff}&=\n\\frac{g_{ds1}g_{ds2}}{\\,g_{m2}+g_{ds1}+g_{ds2}\\,} .\n\\end{aligned}$$\n\nNeglecting $\\lambda$ in $g_{m,\\rm eff}$ this is simply\n$g_{m,\\rm eff}=\\beta_{\\rm eff}V_{OV}=\\sqrt{2\\beta_{\\rm eff}I_D}$.\nThe resistance looking into the drain of the stack is\n\n$$\\;R_{\\rm dev}=\\frac1{g_{out,\\rm eff}}\n      =r_{o2}+r_{ds1}+g_{m2}r_{ds1}r_{o2}\\;$$\n$r_{ds1}=1/g_{ds1}$ being the small triode resistance of $M_1$.\nHence, with no extra load,\n\n$$\\;A_v=\\frac{v_{out}}{v_{in}}\n      =-g_{m,\\rm eff}\\,\\bigl(R_D\\parallel R_{\\rm dev}\\bigr)\\;$$\n\nFor identical devices $g_{m1}=0.29\\beta V_{OV}$,\n$g_{m2}=g_{ds1}=0.71\\beta V_{OV}$, so\n$g_{m,\\rm eff}=0.50\\beta V_{OV}$ and\n$g_{m2}r_{ds1}\\approx1$, i.e.\n\n$$R_{\\rm dev}\\approx 2r_{o2},\\qquad \nA_v\\approx-0.5\\beta V_{OV}\\,(R_D\\parallel2r_{o2}).$$\n\nIn a common $p$-substrate $M_2$ has body effect; then\n$g_{m2}$ in the $v_x$ terms is replaced by $g_{m2}+g_{mb2}$\nand $V_{T2}$ is increased by $V_X$.\n\n### Interpretation\n\n* It is not a true cascode. A true cascode has $M_1$ in\nsaturation, $R_{out}\\approx g_{m2}r_{o2}r_{o1}$, and the\nCG gate shields the input from Miller effect. Here\n$M_1$ is in triode, $r_{ds1}$ is small, so the output\nresistance is only modestly enhanced, $\\sim2r_{o2}$ for\nequal devices, consistent with doubling the effective\nchannel length.\n* The price is halved $g_m$ and $I_D$ for the same $V_{OV}$\n(equal devices), roughly doubled input capacitance,\n$C_{gs1}+C_{gs2}$ plus Miller-multiplied $C_{gd2}$, and an\nextra pole at $X$, $\\;\\omega_{pX}\\approx(g_{m2}+g_{ds1})/C_X$.\n* Benefits are those of a long-channel composite device:\nhigher intrinsic gain $g_{m,\\rm eff}R_{\\rm dev}$, less\nshort-channel/DIBL effect, and, in the off state, the\nusual stack-effect reduction of subthreshold leakage.\n\nIn short, for amplifier design the circuit may be treated\nas one common-source NMOS with $\\beta\\to\\beta_1\\beta_2/\n(\\beta_1+\\beta_2)$, $g_m=\\beta_{\\rm eff}(V_{in}-V_T)$,\noutput resistance as above, and gain\n$-g_{m,\\rm eff}(R_D\\parallel R_{\\rm dev})$.",
        "format": "markdown",
        "sha256": "322b1eec22f689b2730bf51786a9b69d22c57f237d9822c493f4d2ef6d0f920d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, with M1 in triode and M2 saturated, and derives the equivalent device with summed effective channel length for equal widths. Its small-signal output-resistance result also agrees with the golden solution; secondary assumptions do not change the central conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 18314,
        "total_tokens": 19837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 18314,
        "total_tokens": 19837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two devices have the same gate voltage, but they do\nnot form a cascode.  Let $M_{1}=M_{2}$, $(W/L)$, $\\beta =\\mu_{n}C_{ox}W/L$,\nthreshold $V_{t}$, the (body to source) symbols implying no body\neffect, and let\n\n$$V_{X}= {\\rm drain\\;of\\;}M_{1}={\\rm source\\;of\\;}M_{2}\\qquad \nA\\equiv V_{in}-V_{t}\\;.$$\n\n$\\lambda =0$ is used first.\n\n### The intermediate node\n\n$$V_{GS1}=V_{in},\\qquad V_{GS2}=V_{in}-V_{X},\\qquad \nV_{DS1}=V_{X},\\qquad V_{DS2}=V_{out}-V_{X}$$\n\nand the same $I_{D}$ flows in $M_{1},M_{2},R_{D}$.\n\nBoth devices cannot be in saturation.  In saturation, with\n$\\lambda =0$, $I_{D}$ equality would give $V_{GS1}-V_{t}=V_{GS2}-V_{t}$,\ni.e. $V_{X}=0$, contradicting $V_{DS1}\\ge V_{GS1}-V_{t}$.\n$M_{1}$ saturated with $M_{2}$ on is likewise impossible.\nHence, when on,\n\n* $M_{2}$ is in saturation,\n* $M_{1}$ is in the triode region,\n\ni.e. the pinch-off occurs in the upper device, the lower\ndevice is a part of the channel still in the linear regime.\nIndeed\n\n$$\\begin{aligned}\nI_{D}&=\\frac{\\beta}{2}\\bigl(V_{in}-V_{X}-V_{t}\\bigr)^{2} &&M_{2}\\ {\\rm sat}\\\\\nI_{D}&=\\beta\\Bigl[(V_{in}-V_{t})V_{X}-\\frac{V_{X}^{2}}2\\Bigr] &&M_{1}\\ {\\rm triode}\n\\end{aligned}$$\n\nEquating, with $a=A-V_{X}$,\n\n$$\\tfrac12a^{2}= \\tfrac12\\bigl(A^{2}-a^{2}\\bigr)\\;\\;\\Longrightarrow\\;\\;\na=\\frac{A}{\\sqrt2}$$\n\n$$\\;V_{X}=A\\Bigl(1-\\frac1{\\sqrt2}\\Bigr)\\approx0.29\\,(V_{in}-V_{t})\\;$$\n$$\\;I_{D}= \\frac{\\beta}{4}\\,(V_{in}-V_{t})^{2}\\qquad V_{in}>V_{t}\\;$$\n\nFor unequal devices $\\beta_{eq}^{-1}=\\beta_{1}^{-1}+\\beta_{2}^{-1}$ in\nwhat follows.  In words: the stack is exactly, to first order,\none NMOS of\n\n$$\\beta_{eq}=\\frac{\\beta}{2}\\qquad{\\rm i.e.}\\qquad \n\\left(\\frac WL\\right)_{eq}=\\frac{W}{2L}$$\n\na single device of twice the channel length. $V_{X}$ is\nsimply the potential part way along that long channel.  In\nparticular there is no extra cascode headroom: $M_{2}$,\nand the equivalent device, saturate for\n\n$$V_{DS2}\\ge V_{GS2}-V_{t}\\iff V_{out}\\ge V_{in}-V_{t} .$$\n\n### Large signal transfer\n\nFor $V_{in}\\le V_{t}$: $I_{D}\\approx0$, $V_{out}=V_{DD}$, $V_{OH}=V_{DD}$.\n\nFor $V_{in}>V_{t}$ and $V_{out}\\ge V_{in}-V_{t}$, saturation,\n\n$$\\;V_{out}=V_{DD}-I_{D}R_{D}\n      =V_{DD}-\\frac{\\beta_{eq}R_{D}}{2}\\,(V_{in}-V_{t})^{2}\\;,\n\\qquad \\beta_{eq}=\\beta/2 $$\n\na resistor loaded common source inverter characteristic,\nquadratic in $V_{in}$.  For $V_{out}<V_{in}-V_{t}$ the equivalent\ndevice is in triode,\n$I_{D}= \\beta_{eq}\\!\\left[A V_{out}-V_{out}^{2}/2\\right]$ with\n$V_{out}=V_{DD}-I_{D}R_{D}$, e.g. for $V_{in}=V_{DD}$,\n$V_{OL}\\approx V_{DD}/\\bigl[1+\\beta_{eq}R_{D}(V_{DD}-V_{t})\\bigr]$.\nThe switching threshold $V_{in}=V_{out}=V_{M}$ in saturation is\n$V_{M}=V_{DD}-\\tfrac{\\beta_{eq}R_{D}}2(V_{M}-V_{t})^{2}$.\n\n### Small signal, saturation\n\nAt the bias point\n\n$$\\begin{aligned}\ng_{m2}&=\\beta\\,(V_{GS2}-V_{t})=\\beta A/\\sqrt2\\\\\ng_{m1}^{tri}&=\\left.\\frac{\\partial I_{D1}}{\\partial V_{GS1}}\\right|_{V_{DS1}}\n            =\\beta V_{X},\\qquad\ng_{ds1}= \\frac{\\partial I_{D1}}{\\partial V_{DS1}}=\\beta A/\\sqrt2=g_{m2}\\\\\nr_{ds1}&=1/g_{m2}\\;\\;{\\rm (triode\\;resistance\\;of\\;}M_{1}{\\rm )}.\n\\end{aligned}$$\n\nAt node $X$, $i_{d}=g_{m2}(v_{in}-v_{x})=g_{m1}^{tri}v_{in}+g_{ds1}v_{x}$,\ngiving $v_{x}\\approx0.29\\,v_{in}$ and\n\n$$\\frac{i_{d}}{v_{in}}\\equiv g_{m,eq}\n      =\\frac{\\beta A}{2}= \\beta_{eq}(V_{in}-V_{t})\n      =\\frac{2I_{D}}{V_{in}-V_{t}} .$$\n\nHence, restoring $\\lambda$ for $M_{2}$,\n\n$$\\;A_{v}=\\frac{v_{out}}{v_{in}}\n      =-g_{m,eq}\\,\\bigl(R_{D}\\parallel R_{out}\\parallel R_{L}\\bigr)\\;  $$\n\nThe resistance looking into the drain of $M_{2}$ is that of a\nCG device source-degenerated by the *triode* resistance\n$r_{ds1}\\approx1/g_{m2}$, not by an $r_{o1}$:\n\n$$R_{out}\\approx r_{o2}+r_{ds1}+g_{m2}r_{o2}r_{ds1}\n        \\approx 2r_{o2}+\\frac1{g_{m2}}\\approx2r_{o2},$$\n\n$r_{o2}=1/\\lambda I_{D}$, i.e. the $r_{o}$ of a $2L$ device,\n$\\lambda_{eq}\\approx\\lambda/2$.  The intrinsic gain\n$g_{m,eq}R_{out}\\approx4/\\lambda A$ is that of the long device.\n\n### Conclusions\n\n* It is a common-source (resistor-load inverter) stage whose\ntransistor is split into two series $L$ devices $\\equiv$ one\n$2L$ device: same $I$--$V$, half the $g_{m}$ and half the current\nof one constituent device at the same $V_{in}-V_{t}$, twice its $r_{o}$.\n* It is *not* a cascode: in a cascode the upper gate is at ac\nground, both devices saturate, $R_{out}\\sim g_{m2}r_{o2}r_{o1}$ and\n$g_{m}\\approx g_{m1}$.  Here $M_{1}$ is in triode, $R_{out}$ is only\n$\\sim2r_{o}$, and driving $M_{2}$'s gate with $v_{in}$ makes\n$v_{x}$ follow $v_{in}$, reducing $v_{gs2}$ to $\\approx0.71v_{in}$.\n* Advantages are those of a long channel device - lower\n$\\lambda$, higher intrinsic gain, stack leakage reduction -\nat the cost of area, $\\approx$ twice the gate capacitance, and\nlower $g_{m}$ for a given current.  In a common $p$-substrate\nprocess $M_{2}$ in addition suffers body effect, $V_{t2}(V_{X})$\nand $g_{mb2}$, somewhat reducing $g_{m,eq}$ further.",
        "format": "markdown",
        "sha256": "d10cbbe33aab812fcd039a996255359046fc5fd8f061b9ed87e39a3b49170398"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, with the lower device in triode and the upper in saturation, and derives the key result: for equal devices they behave approximately like one transistor with twice the channel length. The added small-signal and output-resistance analysis is consistent with the golden solution.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 17844,
        "total_tokens": 19367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15783,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 17844,
        "total_tokens": 19367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15783,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a resistively loaded common-source\namplifier whose driver is not a single MOS transistor but\ntwo NMOS in series, with their gates tied together.\nIt is the *self-cascode*, or composite transistor, connection.\n\n$M_{1}$ and $M_{2}$ carry the same current, the current\nin $R_{D}$. Let\n\n$$\nV_{X}=\\text{voltage at }M_{1}\\text{ drain-}M_{2}\\text{ source},\\qquad \n\\beta_i=\\mu_nC_{ox}\\left(\\frac WL\\right)_i ,\\qquad A=V_{in}-V_{th}\n$$\n\nThe bodies are tied to the respective sources in the\ndiagram, so that, as drawn, $V_{BS1}=V_{BS2}=0$ and there\nis no body effect. In a common p-substrate this tie for\n$M_{2}$ would require a triple well, SOI or discrete devices.\n\n### 1.  Large signal operation\n\nFor $V_{in}<V_{th}$ both devices are off,\n\n$$\nI_D=0,\\qquad V_{out}=V_{DD}\\; .\n$$\n\nFor appreciable conduction $M_{1}$ and $M_{2}$ cannot both\nbe in saturation. Indeed $M_{1}$ saturated would require\n\n$$\nV_X\\ge V_{GS1}-V_{th}=V_{in}-V_{th},\n$$\n\nwhereas $M_{2}$ on requires\n\n$$V_{GS2}=V_{in}-V_X>V_{th}\\;\\;\\Longleftrightarrow\\;\\;\nV_X<V_{in}-V_{th} .$$\n\nHence in the useful conducting region, apart from the\nzero current boundary,\n\n$$ M_{1}:\\ \\text{triode},\\qquad M_{2}:\\ \\text{saturation} $$\n\nprovided $M_{2}$ is saturated, i.e.\n\n$$\nV_{DS2}\\ge V_{GS2}-V_{th}\\iff\nV_{out}-V_X\\ge V_{in}-V_X-V_{th}\\iff V_{out}\\ge V_{in}-V_{th}.\n$$\n\nNeglecting $\\lambda$ for the d.c. calculation,\n\n$$\\begin{aligned}\nI_D&=\\frac{\\beta_2}{2}\\bigl(V_{in}-V_X-V_{th}\\bigr)^{2}\n      &&M_{2}\\ {\\rm sat.}\\\\\nI_D&=\\beta_1\\Bigl[(V_{in}-V_{th})V_X-\\frac{V_X^{2}}2\\Bigr]\n      &&M_{1}\\ {\\rm triode}\n\\end{aligned}$$\n\nPut $\\delta=V_{in}-V_{th}-V_X=V_{GS2}-V_{th}$. Then\n$I_D=\\tfrac{\\beta_1}{2}(A^{2}-\\delta^{2})\n      =\\tfrac{\\beta_2}{2}\\delta^{2}$, whence\n\n$$\n\\;\\delta = A\\sqrt{\\frac{\\beta_{1}}{\\beta_{1}+\\beta_{2}}}\\;,\\qquad\n\\;V_X = A\\left[1-\\sqrt{\\frac{\\beta_{1}}{\\beta_{1}+\\beta_{2}}}\\right]\\;\n$$\n\nand\n\n$$\n\\,I_D=\\frac12\\,\\beta_{\\rm eff}\\,(V_{in}-V_{th})^{2}\\,,\\qquad \n\\frac1{\\beta_{\\rm eff}}=\\frac1{\\beta_{1}}+\\frac1{\\beta_{2}}\\,,\\qquad\nV_{out}=V_{DD}-I_DR_D .\n$$\n\nFor equal $W$ this is $\\beta_{\\rm eff}=\n\\mu_nC_{ox}W/(L_1+L_2)$: d.c. the pair behaves exactly\nlike one transistor of length $L_1+L_2$.  For\n$\\beta_1=\\beta_2=\\beta$, $V_X=0.29\\,(V_{in}-V_{th})$,\n$V_{GS2}-V_{th}=0.71\\,(V_{in}-V_{th})$,\n$I_D=\\beta (V_{in}-V_{th})^{2}/4$.\n\nThe amplifying region ends when $V_{out}$ falls to\n$V_{in}-V_{th}$. For larger $V_{in}$, $M_{2}$ also enters\nthe triode region, the gain collapses, and the circuit\ntends to the ordinary resistive-load inverter state,\n$V_{out}$ low.\n\n### 2.  Small signal behaviour\n\nIn the region above, with $\\lambda$ restored,\n\n$$\\begin{array}{ll}\nM_{1}\\ {\\rm triode:}& g_{m1}= \\beta_{1}V_X,\\qquad \ng_{ds1}= \\beta_{1}(A-V_X)=\\beta_{1}\\delta ,\\\\[2pt]\nM_{2}\\ {\\rm sat.:}& g_{m2}= \\beta_{2}\\delta\n      =\\dfrac{2I_D}{\\delta},\\qquad \ng_{ds2}= \\lambda_{2}I_D=1/r_{o2}.\n\\end{array}$$\n\n$M_1$ is represented by $g_{m1}v_{in}$ in parallel with\n$g_{ds1}$ from $X$ to ground; $M_2$ by\n$g_{m2}(v_{in}-v_x)$ in parallel with $g_{ds2}$ from\n$V_{out}$ to $X$. Eliminating $v_x$, the short-circuit\ntransconductance of the composite device is\n\n$$\nG_m=\\frac{i_d}{v_{in}}\\Big|_{v_{out}=0}\n =\\frac{g_{m1}(g_{m2}+g_{ds2})+g_{m2}g_{ds1}}\n        {g_{m2}+g_{ds1}+g_{ds2}}\n \\;\\approx\\; \\beta_{\\rm eff}(V_{in}-V_{th})\n      =\\sqrt{2\\beta_{\\rm eff}I_D}\\;,\n$$\n\nexactly the $g_m$ of the equivalent long transistor\nobtained above.\n\nThe resistance looking into the drain of the composite\ndevice, $v_{in}=0$, is that of a common-gate $M_{2}$\nsource-degenerated by the triode resistance\n$r_{ds1}=1/g_{ds1}$ of $M_{1}$:\n\n$$\n\\,R_{\\rm dev}=r_{ds1}+r_{o2}+g_{m2}r_{ds1}r_{o2}\n      \\approx r_{o2}\\bigl(1+g_{m2}r_{ds1}\\bigr)\n      =r_{o2}\\left(1+\\frac{\\beta_{2}}{\\beta_{1}}\\right)\\,  .\n$$\n\nFor $\\beta_1=\\beta_2$, $R_{\\rm dev}\\approx2r_{o2}$, i.e.\nin essence the $r_o$ of a device of length $L_1+L_2$.\nIt is larger than that of $M_2$ alone, but the boost is\nnot the $g_mr_o$ of a true cascode, because the lower\ndevice is in triode and $r_{ds1}$ is small,\n$r_{ds1}=1/g_{m2}$ for identical devices. Making\n$\\beta_{1}$ small compared with $\\beta_{2}$ raises\n$1+\\beta_2/\\beta_1$, at the expense of $G_m$ and of\nvoltage dropped at $X$.\n\nHence, with $R_D$ to $V_{DD}$,\n\n$$\n\\,A_v=\\frac{v_{out}}{v_{in}}\n      =-G_m\\,\\bigl(R_D\\parallel R_{\\rm dev}\\bigr)\\,\n\\qquad\\text{inverting,}\n$$\n\n$R_{in}\\approx\\infty$ at low frequencies, and the\nresistance at the output terminal is $R_D\\parallel\nR_{\\rm dev}$. If $R_D\\ll R_{\\rm dev}$, $A_v\\approx-G_mR_D$.\n\n### 3.  Remarks\n\n* No separate cascode bias is needed, and $M_{2}$\nsaturates for $V_{out}\\ge V_{in}-V_{th}$, i.e. about one\noverdrive of output headroom, like a single device and\nmuch better than a conventional two-overdrive cascode.\nThis is the attraction of the self-cascode at low\n$V_{DD}$.\n* The price is the $G_m$ of the equivalent long device,\n$\\beta_{\\rm eff}<\\beta_{1},\\beta_{2}$, extra area, and\nthe capacitance at the internal node $X$. The resistance\nat $X$ is $\\sim (g_{ds1}+g_{m2})^{-1}$, so the $X$ pole\nis normally high.\n* Bias must satisfy $V_{DD}-I_DR_D\\ge V_{in}-V_{th}$ with\n$I_D=\\tfrac12\\beta_{\\rm eff}(V_{in}-V_{th})^{2}$. For\n$V_{in}$ too large both devices go triode and the circuit\nis a switch, for $V_{in}<V_{th}$ it is off with\n$V_{out}=V_{DD}$. ∎",
        "format": "markdown",
        "sha256": "dcd68ee9774033c2aaa178c6fa3d97934dba4a3225dc20e37ff57dd323930bb5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS pair, with M1 in triode and M2 saturated, and derives the key result that it behaves approximately like one longer-channel device (L_eff ≈ L1 + L2 for equal widths). Its output-resistance discussion also matches the modest self-cascode increase, not a true cascode boost.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 19173,
        "total_tokens": 20696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 19173,
        "total_tokens": 20696,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17057,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistors are NMOS. $M_{1}-M_{2}$ is a source\ncoupled pair with a tail current $I_{1}$, a resistive load\nin the drain of $M_{2}$ only, a signal input to $M_{1}$ and a\nd-c bias, a-c ground, to $M_{2}$.  It is the usual\ndifferential to single ended stage. Let the common source\nnode be $X$, $M_{1}=M_{2}$ in the first instance,\n$\\beta =\\mu_{n}C_{ox}W/L$, $\\lambda\\ne 0$ in general.\n\n### D-C bias\n\n$$ I_{D1}+I_{D2}=I_{1}\\qquad \nV_{X}=V_{in,DC}-V_{GS1}=V_{b}-V_{GS2} $$\n$$ V_{out,Q}=V_{DD}-I_{D2}R_{D} $$\n\nFor balanced operation the d-c component of $V_{in}$ is made\nequal to $V_{b}$. Then, for matched devices,\n\n$$ I_{D1}=I_{D2}=\\frac{I_{1}}2,\\qquad \nV_{GS}=V_{th}+V_{ov},\\;\\;\nV_{ov}= \\sqrt{\\frac{I_{1}}{\\beta}} $$\n$$ V_{X}=V_{b}-V_{th}-V_{ov},\\qquad \nV_{out,Q}=V_{DD}-\\frac{I_{1}}2R_{D},\\qquad \ng_{m}= \\sqrt{\\beta I_{1}}=\\frac{I_{1}}{V_{ov}}  $$\n\nin saturation.  In particular $M_{2}$ in saturation requires\n\n$$V_{out,Q}-V_{X}\\ge V_{ov}\\iff V_{out,Q}\\ge V_{b}-V_{th}\n\\iff V_{DD}-\\frac{I_{1}}2R_{D}\\ge V_{b}-V_{th}$$\n\nand $V_{X}$ must remain large enough to keep the $I_{1}$\nsource in saturation.  The permissible common mode level is\nroughly\n\n$$V_{th}+V_{ov}+V_{min,I_{1}}\\;\\lesssim\\;V_{CM}\\;\\lesssim\\;\nV_{DD}-\\frac{I_{1}}2R_{D}+V_{th} .$$\n\n$V_{out}$ can swing up to $\\approx V_{DD}$, $I_{D2}\\to0$, and\ndown to $\\approx V_{b}-V_{th}$, $M_{2}$ at the edge of saturation.\n\nLarge signal, $\\lambda =0$, with $V_{id}=V_{in}-V_{b}$,\n\n$$\\begin{aligned}\nI_{D1}-I_{D2}&=\\frac{\\beta}{2}V_{id}\n\\sqrt{\\frac{4I_{1}}{\\beta}-V_{id}^{2}},\\qquad \n|V_{id}|\\le \\sqrt{\\frac{2I_{1}}{\\beta}}=\\sqrt2\\,V_{ov}\\\\\nV_{out}&=V_{DD}-R_{D}I_{D2}\n      =V_{DD}-\\frac{I_{1}R_{D}}2+\\frac{R_{D}}2\\,(I_{D1}-I_{D2}) .\n\\end{aligned}$$\n\nFor $|V_{id}|\\gtrsim \\sqrt2V_{ov}$ the current is completely\nsteered to one side: $V_{in}\\gg V_{b}$, $I_{D2}\\to0$, $V_{out}\\to V_{DD}$;\n$V_{in}\\ll V_{b}$, $I_{D2}\\to I_{1}$, $V_{out}\\to V_{DD}-I_{1}R_{D}$.\n\n### Small signal gain\n\n$V_{DD}$ and $V_{b}$ are a-c ground, $I_{1}$ is a-c open.\nNeglecting $r_{o}$ for the moment,\nat $X$\n\n$$ i_{d1}=g_{m1}(v_{in}-v_{x}),\\qquad i_{d2}=g_{m2}(0-v_{x}),\\qquad \ni_{d1}+i_{d2}=0 $$\n\ni.e. an increase in $i_{d1}$ must be met by an equal decrease\nin $i_{d2}$.  Hence\n\n$$ v_{x}= \\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in},\\qquad\ni_{d2}= -\\,\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}v_{in}  $$\n\nand $v_{out}=-i_{d2}R_{D}$,\n\n$$\\,A_{v}\\equiv\\frac{v_{out}}{v_{in}}\n      =\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_{D}\\,  $$\n\nin particular for matched devices $v_{x}\\approx v_{in}/2$,\n\n$$ A_{v}\\approx +\\frac{g_{m}R_{D}}{2} $$\n\nThe $+$ sign: $v_{in}\\uparrow\\;\\Rightarrow\\;i_{d1}\\uparrow\\;\n\\Rightarrow\\;i_{d2}\\downarrow\\;\\Rightarrow\\;v_{out}\\uparrow$.\nFrom the $M_{2}$ gate the gain is $-g_{m}R_{D}/2$, i.e. in\ngeneral $v_{out}\\approx \\tfrac{g_{m}R_{D}}2\\,(v_{in}-v_{b})$.\nThe gain is one half that of a common source stage\n$g_{m}R_{D}$, the price of single ended output.  The\nbody effect, if the bodies are to ground, changes $v_{x}$\nbut not, for matched devices, the $g_{m}R_{D}/2$ result to\nfirst order.\n\nWith $r_{o1}=r_{o2}=r_{o}$ matched,\n\n$$ A_{v}= \\frac{g_{m}}{\\,2/R_{D}+1/r_{o}\\,}\n       =\\frac{g_{m}}2\\,\\bigl(R_{D}\\,\\|\\,2r_{o}\\bigr)\n       \\;\\xrightarrow[r_{o}\\gg R_{D}]{}\\;\\frac{g_{m}R_{D}}2 .$$\n\n### Resistances, common mode\n\nInput resistance at the gate is essentially infinite at\nlow frequency, $C_{in}\\approx C_{gd1}+C_{gs1}/2$, there being\nno Miller effect on $M_{1}$ whose drain is at a-c ground.\n\nLooking into the drain of the common gate device $M_{2}$ the\nresistance is boosted by the resistance at $X$,\n$\\approx 1/g_{m1}\\parallel R_{tail}$.  For matched devices and\nideal $I_{1}$ it is $\\approx 2r_{o}$, so\n\n$$ R_{out}\\approx R_{D}\\,\\|\\,2r_{o}\\;\\approx\\;R_{D}\\quad (R_{D}\\ll r_{o}). $$\n\nFor a pure common mode signal, with $r_{o}\\to\\infty$ and ideal\n$I_{1}$, $i_{d1}$ and $i_{d2}$ cannot change: $A_{cm}\\approx0$,\ninfinite CMRR.  With a real tail resistance $R_{1}$,\n\n$$ A_{cm}\\approx -\\frac{g_{m}R_{D}}{1+2g_{m}R_{1}},\\qquad\n\\left|\\frac{A_{d}}{A_{cm}}\\right|\\approx\\frac{1+2g_{m}R_{1}}2,\n\\qquad A_{d}=\\frac{g_{m}R_{D}}2, $$\n\nfor single ended output.  The dominant high frequency pole\nis normally at the output,\n\n$$ f_{p,out}\\approx\\frac1{2\\pi R_{out}C_{L,tot}},\\qquad\nC_{L,tot}=C_{L}+C_{db2}+C_{gd2}+\\cdots $$\n\nthe pole at $X$ being at $\\approx (g_{m1}+g_{m2})/2\\pi C_{X}$,\nusually much higher.\n\nIn short: a non-inverting differential pair stage,\nbiased at $I_{1}/2$ per side, $V_{out,Q}=V_{DD}-I_{1}R_{D}/2$,\nwith voltage gain $\\approx g_{m}R_{D}/2$, output resistance\n$\\approx R_{D}$, infinite input resistance, and good common\nmode rejection set by the tail current source. It is the\nstandard first stage / differential-to-single-ended converter\nin CMOS op amps.",
        "format": "markdown",
        "sha256": "4ddc22c288ccbc6ba0851ed463159dcef90cafdf771ebeea0aa1f70a93ac8bbd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a source-coupled differential pair with M2 biased at Vb and the output at M2’s drain. It also gives the correct non-inverting gain, approximately gmRD/2 for matched devices.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2469,
        "output_tokens": 15814,
        "total_tokens": 18283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2469,
        "output_tokens": 15814,
        "total_tokens": 18283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13771,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an NMOS differential pair $M_1-M_2$ with a\ntail current $I_1$, a resistive load in only one branch, single-ended\ninput and single-ended output. $V_{in}$ is the non-inverting input and\n$V_b$ is the inverting input, normally a d.c. reference.\nEquivalently, in signal terms, it is a common-drain device $M_1$\ndriving the common-gate device $M_2$. As drawn the bulk is tied to\nthe source, so there is no body effect. Assume matched devices in\nsaturation and, at first, $\\lambda =0$.\n\n### 1. D.C. bias\n\nFor balanced operation $V_{in,DC}=V_b\\equiv V_{CM}$. Then the tail\ncurrent splits equally,\n\n$$\nI_{D1}=I_{D2}=\\frac{I_1}{2},\\qquad \nV_{GS}=V_{TH}+V_{ov},\\qquad \nV_{ov}=\\sqrt{\\frac{I_1}{\\mu_nC_{ox}(W/L)}}\n$$\n\n$$\nV_X = V_{CM}-V_{GS},\\qquad \nV_{out,Q}=V_{DD}-\\frac{I_1}{2}R_D ,\n\\qquad \ng_m=\\frac{I_1}{V_{ov}},\\;\\; r_o=\\frac{2}{\\lambda I_1}.\n$$\n\n$M_2$ in saturation requires $V_{out}\\ge V_X+V_{ov}$, i.e.\n\n$$\nV_{out,Q}\\ge V_b-V_{TH}.\n$$\n\nThe input common-mode range is bounded below by the compliance\n$V_{X,\\min}$ of the tail source,\n$V_{CM,\\min}=V_{X,\\min}+V_{GS}$, and above by $M_2$ leaving\nsaturation,\n\n$$\nV_{CM,\\max}=V_{DD}-\\frac{I_1}{2}R_D+V_{TH}.\n$$\n\n### 2. Large-signal transfer\n\nLet $V_{id}=V_{in}-V_b$, $K_n=\\tfrac12\\mu_nC_{ox}(W/L)$. For\n$|V_{id}|\\le \\sqrt{I_1/K_n}=\\sqrt2\\,V_{ov}$,\n\n$$\nI_{D1}-I_{D2}=V_{id}\\sqrt{2K_nI_1-K_n^{2}V_{id}^{2}},\\qquad\nI_{D2}=\\frac{I_1-(I_{D1}-I_{D2})}{2},\n$$\n\n$$\nV_{out}=V_{DD}-R_DI_{D2}\n      =V_{DD}-\\frac{I_1R_D}{2}+\\frac{R_D}{2}(I_{D1}-I_{D2}).\n$$\n\nFor large positive $V_{id}$, $M_1$ takes all of $I_1$, $M_2$ turns\noff and $V_{out}\\to V_{DD}$. For large negative $V_{id}$, $M_2$ takes\nall of $I_1$ and $V_{out}\\to V_{DD}-I_1R_D$. The useful output swing\nis further limited by $M_2$ remaining in saturation.\n\n### 3. Small-signal gain\n\nLet $v_x$ be the common-source node. With an ideal tail,\n$i_{d1}+i_{d2}=0$. Neglecting $r_o$,\n\n$$\ng_{m1}(v_{in}-v_x)=g_{m2}v_x\n\\;\\;\\Longrightarrow\\;\\;\nv_x=\\frac{g_{m1}}{g_{m1}+g_{m2}}v_{in}.\n$$\n\nThis is the source-follower action of $M_1$ loaded by the\n$1/g_{m2}$ impedance looking into the source of $M_2$. Then\n$i_{d2}=-g_{m2}v_x$ and $v_{out}=-i_{d2}R_D$, so\n\n$$\n\\boxed{\\;\n\\frac{v_{out}}{v_{in}}\n= \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_D\n\\;}\n$$\n\npositive: the stage is non-inverting. For matched devices\n$g_{m1}=g_{m2}=g_m$,\n\n$$\nA_v=+\\frac{g_mR_D}{2}\n     =\\frac{I_1R_D}{2V_{ov}}\n     =\\frac{V_{DD}-V_{out,Q}}{V_{ov}} .\n$$\n\nIt is half the gain of a common-source $M_2$ alone: a 6 dB penalty\npaid for differential operation. In terms of the differential input,\n$v_{out}/(v_{in}-v_b)\\approx g_mR_D/2$; a signal on $V_b$ alone gives\n$-g_mR_D/2$.\n\nIncluding channel-length modulation, for matched devices,\n\n$$\n\\boxed{\\;\nA_v=\\frac{g_m}{\\,2/R_D+1/r_o\\,}\n    =\\frac{g_m}{2}\\bigl(R_D\\parallel 2r_o\\bigr)\n\\;}\n$$\n\nso for $R_D\\gg r_o$ the gain tends to the intrinsic limit $g_mr_o/2$.\n\n### 4. Resistances\n\nInput resistance is that of a MOS gate: essentially infinite at d.c.\n\nAt the output, $M_2$ is a common-gate device whose source is\ndegenerated by the impedance looking into the source of $M_1$,\n$\\approx 1/g_{m1}$. Hence the resistance looking into the drain of\n$M_2$ is $r_{o2}\\bigl(1+g_{m2}/g_{m1}\\bigr)+1/g_{m1}\\approx 2r_o$ for\nmatched devices, and\n\n$$\nR_{out}\\approx R_D\\parallel 2r_o .\n$$\n\n### 5. Common-mode behaviour, frequency response\n\nWith a perfectly matched pair and ideal $I_1$, a common-mode signal\napplied to both gates produces no output: the ideal CMRR is infinite.\nWith a real tail impedance $R_{SS}$,\n$A_{CM}\\approx -R_D/(2R_{SS})$ (single-ended), giving\n$|CMRR|\\approx g_mR_{SS}$; device/load mismatch degrades this further.\n\nThere are two principal poles. The output pole is normally dominant,\n\n$$\n\\omega_{p,out}\\approx\\frac{1}{R_{out}C_{out}},\\qquad \nR_{out}\\approx R_D\\parallel 2r_o .\n$$\n\nAt node $X$ the resistance is low,\n$R_X\\approx 1/(g_{m1}+g_{m2})$, so\n\n$$\n\\omega_{p,X}\\approx\\frac{g_{m1}+g_{m2}}{C_X},\n$$\n\nwith $C_X$ containing $C_{gs1}+C_{gs2}$ and tail capacitance. Because\n$M_2$ is common-gate there is no Miller multiplication of $C_{gd2}$,\nand $M_1$ has its drain at a.c. ground; the CD-CG signal path is\ntherefore considerably wider-band than a simple common-source stage.\n\nIn summary: a non-inverting differential-input, single-ended-output\namplifier with $A_v\\approx +g_m(R_D\\parallel2r_o)/2$, high input\nimpedance, output impedance $R_D\\parallel2r_o$, output quiescent level\n$V_{DD}-I_1R_D/2$, and full current steering over\n$|V_{in}-V_b|\\approx\\sqrt2\\,V_{ov}$.",
        "format": "markdown",
        "sha256": "008de566525001d9f76053e55bcde4605090fc6115d953c3e6d597ffade30be3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled differential pair and its equivalent source-follower driving a common-gate stage, with M2 gated at Vb and output at its drain. The gain is correctly non-inverting; the golden solution’s full-credit rule applies.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2469,
        "output_tokens": 14712,
        "total_tokens": 17181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2469,
        "output_tokens": 14712,
        "total_tokens": 17181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12908,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The $M_{1}-M_{2}$ pair is a source coupled pair.\nThe sources are tied together to the (ideal) tail source\n$I_{1}$, $M_{1}$ has its drain at a-c ground, $M_{2}$ has the\nresistive load $R_{D}$ in its drain.  $V_{b}$ is a d-c bias,\ni.e. a-c ground.  The body is tied to the source in the\nsymbol, so there is no body effect to first order.\nIn the sequel $M_{1},M_{2}$ are taken matched, in saturation,\n$\\beta =\\mu_{n}C_{ox}W/L$.\n\n### D-C and large signal behaviour\n\nWith $V_{GS1}=V_{in}-V_{X}$, $V_{GS2}=V_{b}-V_{X}$,\n$V_{X}$ the common source node,\n\n$$ I_{D1}+I_{D2}=I_{1},\\qquad \nI_{Di}=\\frac{\\beta}{2}\\bigl(V_{GSi}-V_{TH}\\bigr)^{2}(1+\\lambda V_{DSi}) $$\n\nFor the usual bias $V_{inQ}=V_{b}$\n\n$$ I_{D1Q}=I_{D2Q}\\approx \\frac{I_{1}}2 ,\\qquad \nV_{outQ}=V_{DD}-\\frac{I_{1}}2R_{D},\\qquad\nV_{XQ}=V_{b}-V_{GS},\\;\\; V_{GS}=V_{TH}+V_{OV} $$\n\n$$ V_{OV}= \\sqrt{\\frac{I_{1}}{\\beta}},\\qquad \ng_{m}= \\beta V_{OV}= \\frac{I_{1}}{V_{OV}}\\;\\;{\\rm at\\;the\\;Q\\;point}. $$\n\nSaturation of $M_{2}$ requires\n$V_{out}\\ge V_{X}+V_{OV}$, i.e. $V_{outQ}\\gtrsim V_{b}-V_{TH}$,\nand $V_{X}$ must leave headroom for $I_{1}$.  $\\lambda$ makes\n$I_{D1}$ slightly larger than $I_{D2}$ at $V_{in}=V_{b}$ because\n$V_{DS1}\\gg V_{DS2}$.\n\nFor a differential voltage $v_{id}=V_{in}-V_{b}$ the current\nis steered between the two sides,\n$$ I_{D1}-I_{D2}= \\frac{\\beta v_{id}}2\n\\sqrt{\\frac{4I_{1}}{\\beta}-v_{id}^{2}},\\qquad \nV_{out}=V_{DD}-I_{D2}R_{D}, $$\nfor $|v_{id}|<\\sqrt2\\,V_{OV}$.  For $v_{id}>+\\sqrt2V_{OV}$,\n$M_{2}$ is off, $V_{out}\\to V_{DD}$; for $v_{id}<-\\sqrt2V_{OV}$,\n$M_{1}$ is off, $I_{D2}=I_{1}$, $V_{out}=V_{DD}-I_{1}R_{D}$.\nIt is a differential, current steering, stage.\n\n### Small signal gain\n\nLet $v_b=0$ a-c, $R_{D}'=R_{D}\\parallel R_{L}$, $I_{1}$ ideal\nfor the moment, $\\lambda=0$ first.  At node $X$, $i_{d1}+i_{d2}=0$:\n\n$$ g_{m1}(v_{in}-v_{x})-g_{m2}v_{x}=0\n\\qquad\\Longrightarrow\\qquad \nv_{x}= \\frac{g_{m1}}{g_{m1}+g_{m2}}\\,v_{in} $$\n\ni.e. $M_{1}$ is a source follower driving the low impedance,\n$\\approx 1/g_{m2}$, seen into the source of the common gate\ndevice $M_{2}$.  The drain current of $M_{2}$ is\n$i_{d2}=-g_{m2}v_{x}$, so\n\n$$ v_{out}=-i_{d2}R_{D}'=\n\\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_{D}'\\,v_{in} $$\n\nIn particular for matched devices $g_{m1}=g_{m2}=g_{m}$\n\n$$ A_{v}\\equiv\\frac{v_{out}}{v_{in}}=+\\,\\frac{g_{m}}2\\,R_{D}' $$\n\nnon-inverting: $v_{in}\\uparrow\\;\\Rightarrow\\;I_{D1}\\uparrow\\;\n\\Rightarrow I_{D2}=I_{1}-I_{D1}\\downarrow\\;\\Rightarrow\\;\nV_{DD}-I_{D2}R_{D}\\uparrow$.\nIn general $v_{out}= \\dfrac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}R_{D}'\n\\,(v_{in}-v_{b})$; a common mode $v_{in}=v_{b}$ gives,\nideally, no output.  A signal on $V_{b}$ is amplified with\n$-g_{m}R_{D}'/2$, so $V_{b}$ must be a clean a-c ground.\nThe gain is half that of a common source stage of the same\n$g_{m}$ and $R_{D}$ - the price of the dummy $M_{1}$ branch.\n\nWith $r_{o1}=r_{o2}=r_{o}$ the finite $r_{o}$, and the loading\nof $M_{2}$'s source by $M_{1}$, give for the matched case\n\n$$ A_{v}= \\frac{g_{m}R_{D}'}{2+R_{D}'/r_{o}}\n      =\\frac{g_{m}}2\\Bigl(R_{D}'\\parallel 2r_{o}\\Bigr)\n      \\;\\xrightarrow[r_{o}\\to\\infty]{}\\;\\frac{g_{m}R_{D}'}2 . $$\n\nA finite tail impedance $R_{1}$ replaces $g_{m1}+g_{m2}$ by\n$g_{m1}+g_{m2}+1/R_{1}$ in $v_{x}$, a small correction for\n$g_{m}R_{1}\\gg1$, and produces finite common mode gain.\n\n### Resistances, swing, bandwidth\n\n* Input: gate input, $R_{in}\\approx\\infty$ at low frequency.\n  The capacitance at the input is roughly\n  $C_{gd1}+C_{gs1}g_{m2}/(g_{m1}+g_{m2})$, no Miller effect,\n  $M_{1}$'s drain being a-c ground.\n* Output: resistance into $M_{2}$'s drain with its source\n  terminated in $R_{S}\\approx R_{1}\\parallel 1/g_{m1}$ is\n  $R_{o2}\\approx r_{o2}\\bigl[1+g_{m2}R_{S}\\bigr]+R_{S}\n  \\approx 2r_{o}$ matched, so\n\n$$ R_{out}=R_{D}\\parallel R_{o2}\\approx R_{D}\\quad (R_{D}\\ll r_{o}). $$\n\n* Swing: $V_{out,max}\\approx V_{DD}$ ($M_{2}$ off),\n  $V_{out,min}\\approx V_{DD}-I_{1}R_{D}$, limited in practice\n  by $M_{2}$ saturation, $V_{out}\\ge V_{b}-V_{TH}$.\n* Poles: a low impedance pole at $X$,\n  $R_{X}\\approx1/(g_{m1}+g_{m2})$, $C_{X}=C_{gs1}+C_{gs2}+\\cdots$,\n  usually non-dominant, and the dominant output pole\n  $ \\approx \\bigl[\\,2\\pi R_{out}(C_{L}+C_{db2}+C_{gd2})\\bigr]^{-1}$.\n  There is essentially no Miller multiplication.\n\nIn short, it is the single-ended-input, single-ended-output\nNMOS differential pair: a source follower $M_{1}$ current-steering\na common-gate $M_{2}$, gain $+g_{m}R_{D}/2$, high input impedance,\noutput impedance $\\approx R_{D}$, used universally as the input\nstage of differential amplifiers and comparators.",
        "format": "markdown",
        "sha256": "dc9341a7aa44bbfd5aee8b1b055b39a59aa8d138ad40af0bb3a56cd78df8fc49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair as a source follower driving a common-gate stage, with M2 biased at Vb and the output at its drain. The stated small-signal gain is non-inverting, consistent with the signal path.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2406,
        "input_tokens": 2469,
        "output_tokens": 16340,
        "total_tokens": 18809,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2406,
        "input_tokens": 2469,
        "output_tokens": 16340,
        "total_tokens": 18809,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_1$ is a source follower and $M_2$ is a current-source load. The inductive behaviour comes from $M_1$, its gate-source capacitance, and the finite resistance $R_S$ driving its gate.\n\nTo find $Z_{out}$, set $V_{in}=0$ and apply a test voltage $V_x$ at the output. Neglect $r_{o1}$ and $r_{o2}$ initially; they will simply appear in parallel at the end.\n\nThe gate node is loaded by $R_S$ to ground, $C_{gd}$ to $V_{DD}$ (ac ground), and $C_{gs}$ to the output node. KCL at the gate gives\n\n$$\nV_g\\left[\\frac{1}{R_S}+s(C_{gs}+C_{gd})\\right]=sC_{gs}V_x ,\n$$\n\nso that\n\n$$\nV_{gs}=V_g-V_x\n      =-\\,\\frac{1+sR_SC_{gd}}{1+sR_S(C_{gs}+C_{gd})}\\,V_x .\n$$\n\nThe test current (excluding $r_o$ currents) is $I_x=-g_mV_{gs}$, hence\n\n$$\nZ_{out}'(s)=\\frac{V_x}{I_x}\n =\\frac{1}{g_m}\\,\n   \\frac{1+sR_S(C_{gs}+C_{gd})}{1+sR_SC_{gd}} .\n$$\n\nThis has a zero at $\\omega_z=1/[R_S(C_{gs}+C_{gd})]$ and a pole at the higher frequency $\\omega_p=1/(R_SC_{gd})$. Between them $|Z_{out}|$ rises with frequency and $\\angle Z_{out}>0$ — i.e. the current drawn lags the applied voltage, exactly as for an inductor.\n\nIf $C_{gd}$ is small, this reduces to the transparent form\n\n$$\nZ_{out}'(s)\\;\\approx\\;\\frac{1+sR_SC_{gs}}{g_m}\n \\;=\\;\\frac{1}{g_m}+s\\,\\frac{R_SC_{gs}}{g_m}\n \\;=\\;\\frac{1}{g_m}+sL_{eq},\n\\qquad \nL_{eq}=\\frac{R_SC_{gs}}{g_m}.\n$$\n\nWith $C_{gd}$ retained, $Z_{out}'$ is $1/g_m$ in series with $L_{eq}$ shunted by $C_{gs}/(g_mC_{gd})$. The complete result is approximately $Z_{out}\\approx Z_{out}'\\parallel r_{o1}\\parallel r_{o2}$.\n\nPhysically: at low frequency $C_{gs}$ is open, the gate is held fixed through $R_S$, $V_{gs}=-V_x$, and the device presents the usual $1/g_m$. At higher frequency the output signal couples through $C_{gs}$ onto the gate; the gate can no longer be treated as fixed, and the voltage developed across $R_S$ by the $C_{gs}$ current reduces and phase-shifts $V_{gs}$. The $g_m$ current therefore lags $V_x$, which is the signature of an inductance. The transistor acts as a gyrator, converting the gate capacitance terminated in $R_S$ into an inductance at the source.\n\nNote that $R_S=0$ kills the effect ($L_{eq}=0$, $Z_{out}=1/g_m$). This synthesized inductance can resonate with a capacitive load at the output, producing peaking and ringing — the familiar capacitive-load instability of source followers.",
        "format": "markdown",
        "sha256": "42202bca2101b4f8974bab4a6330cd0bd9c3d0f98fef8f491e14a4ad3806fdb6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the source follower and the role of the finite gate resistance and Cgs, but omits the Cgs displacement current in the output test current. This gives an incorrect impedance and inductance, misses the high-frequency limit of Rs and the condition Rs > 1/gm, and incorrectly implies the impedance always rises.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1709,
        "output_tokens": 11045,
        "total_tokens": 12754,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1709,
        "output_tokens": 11045,
        "total_tokens": 12754,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10100,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a source follower $M_{1}$ biased by the\ncurrent source $M_{2}$.  $M_{2}$, whose gate is at ac ground,\ncontributes essentially $r_{o2}$ in parallel with the output.\nThe interesting part is the impedance looking into the source\nof $M_{1}$ when its gate is terminated in a resistance.\n\nFor the output resistance set $V_{in}=0$.  The gate of $M_{1}$\nis then returned to ac ground through $R_{S}$.  Apply a test\nvoltage $V_{x}$ at the output and find the current $I_{x}$\ndrawn from the test source.  Neglect $r_{o1},r_{o2}$ and $C_{gd1}$\nfor the moment; they will be put back in parallel at the end.\n\nThe gate node is coupled to the source node by $C_{gs1}$.\nGate KCL gives\n\n$$\n\\frac{V_{g}}{R_{S}}+(V_{g}-V_{x})sC_{gs1}=0\n$$\n\ni.e.\n\n$$\nV_{g}=V_{x}\\,\\frac{sC_{gs1}R_{S}}{1+sC_{gs1}R_{S}},\\qquad\nV_{gs1}=V_{g}-V_{x}= -\\,\\frac{V_{x}}{1+sC_{gs1}R_{S}} .\n$$\n\nKCL at the output node then gives, for the current entering\nthe source of $M_{1}$,\n\n$$\nI_{x}= -g_{m1}V_{gs1}+ (V_{x}-V_{g})sC_{gs1}\n      =V_{x}\\,\\frac{g_{m1}+sC_{gs1}}{1+sC_{gs1}R_{S}} .\n$$\n\nHence the impedance looking into the source is\n\n$$\nZ_{s}(s)=\\frac{V_{x}}{I_{x}}=\n\\frac{1+sC_{gs1}R_{S}}{\\,g_{m1}+sC_{gs1}\\,},\n\\qquad \nZ_{out}\\approx Z_{s}\\;\\big\\|\\;r_{o1}\\;\\big\\|\\;r_{o2} .\n$$\n\nAt dc, $Z_{s}=1/g_{m1}$, the familiar source-follower result.\nOn $s=j\\omega$,\n\n$$\nZ_{s}(j\\omega)=\n\\frac{g_{m1}+\\omega^{2}C_{gs1}^{2}R_{S}\n      +j\\omega C_{gs1}\\big(g_{m1}R_{S}-1\\big)}\n     {g_{m1}^{2}+\\omega^{2}C_{gs1}^{2}} .\n$$\n\nTherefore\n\n$$\n\\operatorname{Im} Z_{s}(j\\omega)=\n\\frac{\\omega C_{gs1}\\,(g_{m1}R_{S}-1)}\n     {g_{m1}^{2}+\\omega^{2}C_{gs1}^{2}} .\n$$\n\nIf\n\n$$\nR_{S}>\\frac{1}{g_{m1}}\n$$\n\nthe imaginary part is positive: the terminal voltage leads\nthe terminal current, as for an inductor.  Indeed for\n$\\omega \\ll g_{m1}/C_{gs1}$,\n\n$$\nZ_{s}\\approx \\frac1{g_{m1}}+sL_{eq},\n\\qquad\nL_{eq}= \\frac{C_{gs1}}{g_{m1}}\\!\\left(R_{S}-\\frac1{g_{m1}}\\right)\n      =\\frac{C_{gs1}\\big(g_{m1}R_{S}-1\\big)}{g_{m1}^{2}}>0 .\n$$\n\nMore exactly, $Z_{s}$ is $1/g_{m1}$ in series with the parallel\ncombination of $L_{eq}$ and $R_{S}-1/g_{m1}$, in parallel with\n$r_{o1}\\|r_{o2}$.\n\nPhysically, $C_{gs1}$ tries to make the gate follow the\nsource voltage $V_{x}$, but it can do so only by charging\nthrough $R_{S}$.  The gate therefore follows the output with\nan $R_{S}C_{gs1}$ lag.  The resulting $V_{gs1}$, and hence the\n$g_{m1}V_{gs1}$ current supplied by $M_{1}$, contains a\ncomponent in quadrature with, and lagging, $V_{x}$.  A lagging\ncurrent is precisely the terminal behaviour of an inductor.\nWith $R_{S}=0$ the gate is clamped and $Z_{s}=1/(g_{m1}+sC_{gs1})$,\nresistive-capacitive; the finite gate resistance is essential.\n\nThis is an active, synthesized inductance, useful only over\nroughly $1/(R_{S}C_{gs1})\\lesssim\\omega\\lesssim g_{m1}/C_{gs1}$;\nparasitic capacitances at the output eventually dominate.\nIn particular the inductive $Z_{out}$ can resonate with a\ncapacitive load, producing peaking and ringing in a source\nfollower.",
        "format": "markdown",
        "sha256": "8edd8f0d9dfa04867584c2b4e0ee90733cd5bba84372cf82fbb85a50f549aba7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output-impedance expression. It shows that the impedance is inductive when Rs > 1/gm1 and explains the role of Cgs1 and the gate resistance; the high-frequency limit Rs follows from the expression.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1709,
        "output_tokens": 9435,
        "total_tokens": 11144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1709,
        "output_tokens": 9435,
        "total_tokens": 11144,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$M_1$ is a source follower and $M_2$, with fixed gate bias, is\nessentially a current-source load. To find $Z_{out}$ set $V_{in}=0$,\nso the gate of $M_1$ is returned to ac ground through $R_S$, and\napply a test voltage $V_x$ at the output.\n\nNeglect $r_{o1},r_{o2}$ and $C_{gd1}$ for the moment; they will only\nappear in parallel with the result. The important element is\n$C_{gs1}$.\n\nAt the gate node,\n$$\n\\frac{V_g}{R_S}+sC_{gs}(V_g-V_x)=0\n$$\nso that\n$$\nV_g=V_x\\,\\frac{sC_{gs}R_S}{1+sC_{gs}R_S},\n\\qquad\nV_{gs}=V_g-V_x=-\\,\\frac{V_x}{1+sC_{gs}R_S}.\n$$\n\nThe current drawn into the source of $M_1$ is\n$$\nI_x=-(g_m+sC_{gs})V_{gs}\n     =(g_m+sC_{gs})\\frac{V_x}{1+sC_{gs}R_S},\n$$\nhence the impedance looking into the source is\n$$\nZ_1(s)=\\frac{V_x}{I_x}\n      =\\frac{1+sC_{gs}R_S}{\\,g_m+sC_{gs}\\,},\n\\qquad \nZ_{out}\\approx Z_1\\parallel r_{o1}\\parallel r_{o2}.\n$$\n\nAt $s=j\\omega$,\n$$\n\\operatorname{Im} Z_1(j\\omega)\n   =\\frac{\\omega C_{gs}\\,(g_mR_S-1)}\n          {g_m^{2}+(\\omega C_{gs})^{2}} .\n$$\nThus, if\n$$\ng_mR_S>1,\n$$\nthen $\\operatorname{Im}Z_1>0$: the output voltage leads the\noutput current, i.e. the output impedance is inductive.\nFor frequencies well below $g_m/C_{gs}$,\n$$\nZ_1(s)\\approx \\frac{1}{g_m}+s\\,\n       \\frac{C_{gs}(R_S-1/g_m)}{g_m}\n     =\\frac1{g_m}+sL_{eq},\n\\qquad\nL_{eq}\\approx \\frac{C_{gs}R_S}{g_m}.\n$$\n\nPhysically, $V_{gs}$, and therefore the $g_m$ current, does not\nrespond instantly to $V_x$. A change in $V_x$ must change the\nvoltage on $C_{gs}$ through the finite resistance $R_S$, so $V_g$\nfollows $V_x$ imperfectly and with a phase lag. Consequently\n$$\n-g_mV_{gs}=\\frac{g_m}{1+sC_{gs}R_S}V_x\n$$\nis a current that lags the applied voltage, exactly as the\ncurrent in an inductor lags its voltage. The circuit is a\ngyrator: $C_{gs}$, acted on by $g_m$ and $R_S$, is reflected to\nthe source as an inductance $ \\sim C_{gs}R_S/g_m$.\n\nAt low frequency $Z_{out}\\approx 1/g_m\\parallel r_{o1}\\parallel r_{o2}$,\nas usual. At intermediate frequencies the inductive term appears,\nand it can resonate with a capacitive load at the output,\nproducing peaking or ringing. No physical inductor is present;\nthe energy storage is in $C_{gs}$.",
        "format": "markdown",
        "sha256": "06f15c05e04b6601d83214ee21aadf454e68b436b7fd05e07a049993b469d66d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the output impedance, including the condition gm·RS > 1 for inductive behavior and the equivalent-inductance term. The phase-lag explanation is consistent with the mechanism; minor comments about neglected parasitics do not affect the main result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1709,
        "output_tokens": 8774,
        "total_tokens": 10483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1709,
        "output_tokens": 8774,
        "total_tokens": 10483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Both devices are NMOS, with source and bulk to ground,\nso there is no body effect. The connections are\n\n$$\n\\begin{array}{c|ccc}\n & G & D & S\\\\ \\hline\nM_{1}&X&V_{out}&0\\\\\nM_{2}&V_{out}&X&0\n\\end{array}\n$$\n\ni.e. the gate of each is tied to the drain of the other.\nIt is a cross-coupled pair with very asymmetric drain loads:\n$R_{D1}$ in $M_{1}$ and the (ideal) current source $I_{in}$\nin $M_{2}$. It is a regenerative, positive feedback cell --\nin essence a MOS latch / negative resistance cell, not a\nconventional linear amplifier.\n\n### 1.  Formal d-c solution in saturation\n\nGate currents are zero, so KCL at $X$ gives, in any\nfinite d-c equilibrium,\n\n$$\nI_{D2}=I_{in}\\tag{1}\n$$\n\nand at the output\n\n$$\nI_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}} .\\tag{2}\n$$\n\nWith $k_{ni}=\\mu_nC_{ox}(W/L)_i$, $\\lambda\\ne0$ in general,\n\n$$\\begin{aligned}\nI_{in}&=\\tfrac{k_{n2}}2\\,(V_{out}-V_{th})^{2}(1+\\lambda V_X)\\\\\n\\frac{V_{DD}-V_{out}}{R_{D1}}&=\n \\tfrac{k_{n1}}2\\,(V_{X}-V_{th})^{2}(1+\\lambda V_{out}) .\n\\end{aligned}\\tag{3}$$\n\nFor $\\lambda\\to0$ this decouples,\n\n$$\n\\,V_{out}\\approx V_{th}+\\sqrt{\\frac{2I_{in}}{k_{n2}}}\\,,\\qquad\n\\,V_{X}\\approx V_{th}+\\sqrt{\\frac{2I_{D1}}{k_{n1}}}\\,,\\qquad\nI_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}  \\tag{4}\n$$\n\nwith saturation requiring\n$V_{out}\\ge V_X-V_{th}$, $V_X\\ge V_{out}-V_{th}$.\nA SPICE operating point will often find (3)-(4).  It is,\nhowever, unstable, as shown next.\n\n### 2.  Small signals, loop gain\n\nLet $C_X$ be the capacitance at $X$\n($C_{gs1}+C_{db2}+\\dots$) and $C_O$ at the output\n($C_{gs2}+C_{db1}+\\dots$).  With\n$g_{mi},\\,r_{oi}$ at the point (4),\n\n$$\\begin{aligned}\n(sC_X+g_{o2})v_x+g_{m2}v_{out}&=i_{in}\\\\\ng_{m1}v_x+(sC_O+G_D)v_{out}&=0\n\\end{aligned}\\qquad \nG_D\\equiv\\frac1{R_{D1}}+\\frac1{r_{o1}},\\;\\;g_{o2}=\\frac1{r_{o2}} \\tag{5}$$\n\nBreaking the loop at the gate of $M_{1}$ (node $X$):\n$M_{1}$ is a common-source stage,\n$v_{out}/v_x=-g_{m1}(R_{D1}\\!\\parallel\\! r_{o1})$;\n$M_{2}$ is a second common-source stage returning a\nsignal to $X$ with gain $-g_{m2}r_{o2}$.  Hence\n\n$$\nL(s)=\\frac{g_{m1}g_{m2}}\n{(sC_X+g_{o2})(sC_O+G_D)},\\qquad \nL(0)=g_{m1}g_{m2}r_{o2}\\bigl(R_{D1}\\!\\parallel\\! r_{o1}\\bigr)>0 \\tag{6}\n$$\n\nTwo inversions make the feedback positive, and normally\n$L(0)\\gg1$ since it is the product of two intrinsic\nstage gains.\n\nFormally, from (5),\n\n$$\n\\frac{v_{out}}{i_{in}}=\n\\frac{1}{\\,g_{m2}-\\dfrac{1}{g_{m1}r_{o2}(R_{D1}\\!\\parallel\\! r_{o1})}\\,}\n\\;\\approx\\;\\frac{1}{g_{m2}}\\frac{1}{1-1/L(0)}\n\\;\\approx\\;\\frac1{g_{m2}} \\tag{7}\n$$\n\nbut this is the (differential) slope of the unstable\nbranch (3).  The characteristic equation $1-L(s)=0$ is\n\n$$\n(sC_X+g_{o2})(sC_O+G_D)-g_{m1}g_{m2}=0, \\tag{8}\n$$\n\nwhose constant term $g_{o2}G_D-g_{m1}g_{m2}<0$ for $L(0)>1$.\nHence one pole is in the right half plane, approximately\n\n$$\ns_{+}\\approx\n\\frac{g_{m1}g_{m2}-g_{o2}G_D}{C_XG_D+C_Og_{o2}}>0,\n$$\n\nand the saturated bias point repels transients\nregeneratively, with time constant $\\approx 1/s_{+}$,\nuntil a device leaves saturation.\n\n### 3.  Negative port resistances\n\nApply a test voltage at the output with $i_{in}=0$ (a-c).\nKCL at the floating node $X$ gives $g_{m2}v_{out}+v_x/r_{o2}=0$,\ni.e. $v_x=-g_{m2}r_{o2}v_{out}$.  Thus\n\n$$\nR_{out}=\\frac{v_{out}}{i_t}\n=\\left[\\frac1{R_{D1}}+\\frac1{r_{o1}}-g_{m1}g_{m2}r_{o2}\\right]^{-1}\n\\;\\approx\\;-\\,\\frac{1}{g_{m1}g_{m2}r_{o2}}\\;<\\;0 . \\tag{9}\n$$\n\nSimilarly, looking into node $X$ with the output\nterminated in $R_{D1}$,\n\n$$\nR_{X}= \\left[\\frac1{r_{o2}}-g_{m1}g_{m2}\n\\bigl(R_{D1}\\!\\parallel\\! r_{o1}\\bigr)\\right]^{-1}\n\\approx -\\frac{1}{g_{m1}g_{m2}(R_{D1}\\!\\parallel\\! r_{o1})}<0 . \\tag{10}\n$$\n\n$g_{m2}$ is set by the bias $I_{D2}=I_{in}$,\n$g_{m2}\\approx\\sqrt{2k_{n2}I_{in}}$, and $g_{m1}$ by\n$I_{D1}$ in (2), so $I_{in}$ controls $|R_{out}|$.\nWith an $LC$ tank at $V_{out}$ this negative resistance\ncan cancel the tank loss, $|R_{out}|<R_{p,\\text{tank}}$,\ngiving a (nonlinearly amplitude-limited) oscillator;\nwithout a tank it simply latches.\n\n### 4.  Large-signal behaviour\n\nThe physically stable high state is\n\n* $M_{1}$ essentially off, $M_{2}$ on in triode,\n* $V_{out}\\approx V_{DD}$ (no drop in $R_{D1}$),\n* $I_{in}=k_{n2}\\!\\left[(V_{DD}-V_{th})V_X-V_X^{2}/2\\right]$,\n  $V_X$ small, $V_X<V_{th1}$.\n\nHere $g_{m1}\\approx0$, the loop is open, and the state is\nstable.  As $I_{in}$ (or a disturbance at $X$) raises\n$V_X$ toward $V_{th1}$, $M_{1}$ turns on, $V_{out}$ falls,\n$M_{2}$ must raise $V_X$ further to keep carrying\n$I_{in}$, and the loop gain passes through unity:\nsnap-action.  The trigger current is of the order of\n$I_{D2}$ evaluated at $V_X\\!\\approx\\! V_{th1}$, $V_{GS2}=V_{DD}$,\n\n$$\nI_{\\text{trig}}\\;\\sim\\;\nk_{n2}\\Bigl[(V_{DD}-V_{th})V_{th}-\\tfrac12V_{th}^{2}\\Bigr].\n$$\n\nAfter triggering, $M_{2}$ is off, $M_{1}$ is on in triode\ncarrying $\\approx V_{DD}/R_{D1}$, $V_{out}\\approx0$;\nin the ideal model $V_X$ then runs to the compliance of\nthe $I_{in}$ source (in practice limited by the source,\nleakage or breakdown, and a reset device is normally\nadded to discharge $X$).  The saturated point (4) is\nthe separatrix between the two basins.\n\nIn short: $M_{1}$-$M_{2}$ is a positive-feedback\ncross-coupled latch presenting\n$R_{out}\\approx-1/g_{m1}g_{m2}r_{o2}$ at its output.\nIt is usable as a regenerative current-threshold\ndetector/sense amplifier and as a negative-resistance\noscillator cell, but the all-saturated operating point\n(4) with formal transresistance $\\approx1/g_{m2}$ is\nunstable for the usual $g_{m1}g_{m2}r_{o2}(R_{D1}\\!\\parallel\\!r_{o1})\\gg1$.",
        "format": "markdown",
        "sha256": "f94aa564252151a0580359783e86ca0675581f2ad3f59658f3299d2e42361ec0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2’s gate as tied to Vout, the positive-feedback loop through M1 and M2, and its consequences: negative input resistance, instability, and latching. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2202,
        "output_tokens": 26251,
        "total_tokens": 28453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2202,
        "output_tokens": 26251,
        "total_tokens": 28453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two devices are NMOS, sources and bodies to ground.\n$$\nM_{1}: G=X,\\;D=V_{out},\\;S=0\\qquad \nM_{2}: G=V_{out},\\;D=X,\\;S=0\n$$\ni.e. the gate of each is the drain of the other.  $M_{1}$ is a\ncommon-source device with load $R_{D1}$; the drain of $M_{2}$ is\nloaded by the (high impedance) current source $I_{in}$.\nIt is a cross coupled, positive feedback, pair - in ordinary\nsizes a latch, not a stable linear transimpedance amplifier.\n\nLet $\\beta_i=\\mu_nC_{ox}(W/L)_i$, $V_{TH}$ the (common) threshold,\n$\\lambda =0$ for the essentials.  Gate currents are zero, so in\nany internal d-c equilibrium\n\n$$\\;I_{in}=I_{D2}\\;\\qquad \nV_{out}=V_{DD}-I_{D1}R_{D1} \\tag{1}$$\n\n$$ \nI_{D1}= \\tfrac{\\beta_1}{2}(V_X-V_{TH})^{2}\\;\\;{\\rm sat.},\\qquad\nI_{D2}= \\beta_{2}\\!\\left[(V_{out}-V_{TH})V_X-\\tfrac12V_X^{2}\\right]\\;\\;{\\rm lin.\\;etc.}\n$$\n\n### The $I$--$V$ seen at $X$\n\nLet $I_X=I_{D2}$ be the current the $M_1M_2R_{D1}$ network sinks\nfrom node $X$, $V_{out}$ being allowed to follow $V_X$ through\n$M_1,R_{D1}$.\n\n* $V_X<V_{TH}$: $M_1$ off, $V_{out}=V_{DD}$, $M_2$ in the linear\nregion with $V_{GS2}=V_{DD}$,\n$$\nI_X=\\beta_2\\big[(V_{DD}-V_{TH})V_X-\\tfrac12V_X^{2}\\big],\\qquad \n\\frac{dI_X}{dV_X}>0 .\n$$\n\n* $V_X>V_{TH}$: $M_1$ turns on,\n$$\nV_{out}\\approx V_{DD}-\\frac{\\beta_1R_{D1}}2\\,(V_X-V_{TH})^{2}\n\\tag{2}$$\nfalls, hence $V_{GS2}=V_{out}$ falls.  With $M_2$ still\nessentially linear,\n$$\nI_X=\\beta_2\\big[(V_{out}(V_X)-V_{TH})V_X-\\tfrac12V_X^{2}\\big].\n$$\n$I_X(V_X)$ rises, reaches a maximum, and then falls to\n$\\approx0$ when $V_{out}<V_{TH}$ turns $M_2$ off.  It is a\nvoltage controlled negative differential resistance\ncharacteristic\n\n```\n Ix ^          I_T+\n    |           /\\\n    |          /  \\   dIx/dVx < 0 : unstable\n    |         /    \\____  M2 off\n    |        /\n    +------------------------> Vx\n                 VTH\n```\n\nA horizontal load line $I_X=I_{in}$ intersects the rising part\nin a stable point, the falling part in an unstable point.\nFor $I_{in}$ larger than the peak there is no internal\nintersection at all.\n\nIndeed, about a both-on saturated point, with $C_X,C_{out}$\nthe node capacitances,\n\n$$\\begin{aligned}\nC_X\\dot v_x&=-g_{ds2}v_x-g_{m2}v_{out}\\\\\nC_{out}\\dot v_{out}&=-g_{m1}v_x-\\big(R_{D1}^{-1}+g_{ds1}\\big)v_{out}\n\\end{aligned}\\qquad \nv_{out}=-g_{m1}(R_{D1}\\!\\parallel r_{o1})v_x $$\n\nThe (positive) loop gain round $v_x\\to v_{out}\\to i_{d2}\\to v_x$ is\n\n$$\n\\,T=g_{m1}(R_{D1}\\!\\parallel r_{o1})\\;g_{m2}r_{o2}\\,>0\n$$\n\n$v_x\\uparrow\\;\\Rightarrow\\;v_{out}\\downarrow\\;\\Rightarrow\\;\ni_{d2}\\downarrow\\;\\Rightarrow\\;v_x\\uparrow$ still more.\nFormally\n\n$$\n\\frac{v_{out}}{i_{in}}=\n\\frac{-\\,g_{m1}(R_{D1}\\!\\parallel r_{o1})}\n{\\,r_{o2}^{-1}-g_{m1}g_{m2}(R_{D1}\\!\\parallel r_{o1})\\,}\n\\approx\\frac1{g_{m2}},\\qquad\nR_{X}\\equiv\\frac{v_x}{i_{in}}=\n\\frac{r_{o2}}{1-T}\\approx\n-\\,\\frac{1}{g_{m1}g_{m2}(R_{D1}\\!\\parallel r_{o1})}\\;\\;{\\rm for}\\;T\\gg1,\n$$\n\ni.e. a negative resistance at $X$.  For $T<1$ this would be a\nstable positive-feedback amplifier of enhanced gain $ \\propto\n1/(1-T)$; in practice $g_mr_o\\gg1$ and $T\\gg1$, the both-on\npoint, e.g.\n$V_{out}=V_{TH}+\\sqrt{2I_{in}/\\beta_2}$,\n$V_X=V_{TH}+\\sqrt{2(V_{DD}-V_{out})/\\beta_1R_{D1}}$, is a saddle,\nunobservable in steady state.\n\n### The two usable states\n\n1. Output high.  $M_1$ (essentially) off, $M_2$ on, linear:\n$$\nV_{out}\\approx V_{DD},\\qquad \nI_{in}= \\beta_2\\big[(V_{DD}-V_{TH})V_X-\\tfrac12V_X^{2}\\big],\n$$\n$V_X$ small.  Stable while the loop gain on this branch is\n$<1$.\n\n2. Output low, railed.  $V_{out}$ has been driven below\n$V_{TH}$, $M_2$ is off, $M_1$ is hard on.  In the ideal model\n$V_X$ is driven to the compliance limit $V_{X,\\max}$ of the\n$I_{in}$ source ($\\sim V_{DD}$ in practice), and, with $M_1$\nin the linear region,\n$$\n\\frac{V_{DD}-V_{out,L}}{R_{D1}}\\approx\n\\beta_1\\big[(V_{X,\\max}-V_{TH})V_{out,L}-\\tfrac12V_{out,L}^{2}\\big]\n\\;\\;\\approx\\;\\;\n\\frac{V_{DD}}{1+\\beta_1R_{D1}(V_{X,\\max}-V_{TH})}\\ll V_{DD}.\n$$\nThe loop is opened by $M_2$ being off.\n\n### Trip current\n\nTo first order regeneration starts when $V_X$ reaches\n$V_{TH1}$ with $V_{out}\\approx V_{DD}$, i.e. for $V_{DD}>2V_{TH}$\n\n$$\n\\,I_{T+}\\;\\approx\\;I_{D2}\\big|_{V_{GS}=V_{DD},\\,V_{DS}=V_{TH}}\n      =\\beta_{2}V_{TH}\\Bigl(V_{DD}-\\tfrac32V_{TH}\\Bigr)\\,  .\n$$\n\nExactly, in the square law model, the trip is the peak of\n$I_X(V_X)$, $dI_X/dV_X=0$, i.e. $T=1$ on the high branch:\nwith (2), in the linear-$M_2$/saturated-$M_1$ region,\n$$\nV_{out,T}-V_{TH}-V_{X,T}=R_{D1}\\,\\beta_1(V_{X,T}-V_{TH})V_{X,T},\n\\qquad \nI_{T+}= \\beta_2\\big[(V_{out,T}-V_{TH})V_{X,T}-\\tfrac12V_{X,T}^{2}\\big].\n$$\nIncreasing $\\beta_2$ raises $I_{T+}$; increasing $\\beta_1$ or\n$R_{D1}$ makes $V_{out}$ fall faster, strengthens the feedback\nand lowers $I_{T+}$.  Once past the peak,\n$v_x$ grows essentially exponentially: $M_1$ pulls $V_{out}$\ndown, $M_2$ sinks less and less of $I_{in}$, $V_X$ rises\nfurther, until $M_2$ is off and $V_{out}$ is low.  Pulling\n$V_X$ back down, by a reset device or by an $I_{in}$ that can\nsink current, until $V_{out}(V_X)$ rises to $V_{TH2}$,\nturns $M_2$ on and regenerates in the opposite direction.\n\nIn short: a regenerative NMOS latch / current-mode trip\ncircuit, presenting a negative resistance at $X$, with a\nhigh output $\\approx V_{DD}$ for $I_{in}<I_{T+}$ and a latched\nlow output for $I_{in}>I_{T+}$.  It is used, with an explicit\nreset, as a current comparator, latch/sense element and\nnegative-resistance element; with only a unidirectional\nideal $I_{in}$ it trips once and must be reset externally.",
        "format": "markdown",
        "sha256": "f0dcb367309e9751af2faf5e8dbfffa0132d455f084597ab452325316bc5fde1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, recognizes the positive-feedback loop, and explains its negative input resistance and regenerative latching behavior.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2202,
        "output_tokens": 31454,
        "total_tokens": 33656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29190,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2202,
        "output_tokens": 31454,
        "total_tokens": 33656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29190,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "M1 and $M_{2}$ are NMOS devices with source and bulk to ground,\nhence with no body effect.\n\n$$\\begin{aligned}\nM_{1}:&\\qquad G=X,\\quad D=V_{out},\\quad S=0\\\\\nM_{2}:&\\qquad G=V_{out},\\quad D=X,\\quad S=0\n\\end{aligned}$$\n\n$M_{1}$ is a common source stage $X\\to V_{out}$ with load $R_{D1}$.\n$M_{2}$ is a common source stage $V_{out}\\to X$ whose drain load\nis, ideally, the input current source.  Two inverting stages are\nconnected in a ring: it is a regenerative, i.e. positive feedback,\ncircuit.\n\n### DC, formal\n\nGate currents are zero, so at $X$ and at the output\n\n$$ I_{D2}=I_{in},\\qquad \nI_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}} \\tag{1}$$\n\nwith, in saturation and $\\beta_i=\\mu_nC_{ox}(W/L)_i$,\n\n$$\\begin{aligned}\nI_{D2}&=\\tfrac12\\beta_2\\,(V_{out}-V_{TH})^{2}(1+\\lambda V_X)\\\\\nI_{D1}&=\\tfrac12\\beta_1\\,(V_{X}-V_{TH})^{2}(1+\\lambda V_{out}) .\n\\end{aligned}$$\n\nFor $\\lambda\\approx0$\n\n$$ V_{out}\\approx V_{TH}+\\sqrt{\\frac{2I_{in}}{\\beta_2}},\\qquad\nV_{X}\\approx V_{TH}+\\sqrt{\\frac{2I_{D1}}{\\beta_1}},\\qquad\nI_{D1}= \\frac{V_{DD}-V_{out}}{R_{D1}} .$$\n\n$M_{2}$ must take exactly $I_{in}$; $V_{out}$ is essentially the\n$V_{GS2}$ needed to do so.  $M_{1}$ and $R_{D1}$ must then produce\nthat $V_{out}$, which fixes $V_X=V_{GS1}$.  Both saturated requires\n\n$$V_{out}\\ge V_X-V_{TH},\\qquad V_X\\ge V_{out}-V_{TH}.$$\n\n### Small signal\n\nPut $v_{gs1}=v_x$, $v_{gs2}=v_{out}$.  KCL at $X$ and at the output,\nwith $R'\\equiv R_{D1}\\parallel r_{o1}$, is\n\n$$\\begin{aligned}\ni_{in}&=g_{m2}v_{out}+\\frac{v_x}{r_{o2}} &&\\text{at }X \\tag{2}\\\\\n0&=g_{m1}v_x+v_{out}\\!\\left(\\frac1{R_{D1}}+\\frac1{r_{o1}}\\right)\n   &&\\text{at }V_{out} \\tag{3}\n\\end{aligned}$$\n\nFrom (3) the $M_{1}$ stage gain is\n\n$$\\frac{v_{out}}{v_x}=-g_{m1}R'=-g_{m1}(R_{D1}\\parallel r_{o1}) .$$\n\nSolving (2)-(3),\n\n$$\\,R_m\\equiv\\frac{v_{out}}{i_{in}}\n      =\\frac{1}{\\,g_{m2}-\\dfrac{1}{g_{m1}R'r_{o2}}\\,}\\,  \\tag{4}$$\n\n$$\\,R_{in}\\equiv\\frac{v_x}{i_{in}}\n      =\\frac{1}{\\,1/r_{o2}-g_{m1}g_{m2}R'\\,}\n      =-\\frac{1}{g_{m1}g_{m2}R'-1/r_{o2}}\\,  \\tag{5}$$\n\ni.e. for $r_o\\to\\infty$\n\n$$\\frac{v_{out}}{i_{in}}\\approx\\frac1{g_{m2}},\\qquad\n      \\frac{v_x}{i_{in}}\\approx-\\frac{1}{g_{m1}g_{m2}R_{D1}}<0 .$$\n\nThe input resistance at $X$ is negative.  Physically, a larger\n$I_{in}$ requires a larger $V_{GS2}=V_{out}$.  To obtain a larger\n$V_{out}$, $M_{1}$ must conduct less through $R_{D1}$, so $V_X$\nmust fall: $dV_X/dI_{in}<0$.\n\nThe resistance at the output, $i_{in}=0$ (a.c.) and $R_{D1}$\nincluded, is likewise\n\n$$R_{out}=\n\\frac{1}{\\;1/R_{D1}+1/r_{o1}-g_{m1}g_{m2}r_{o2}\\;}\n\\approx -\\frac{1}{g_{m1}g_{m2}r_{o2}}<0 .$$\n\n### Loop gain and stability\n\nBreaking the loop at the gate of $M_{2}$,\n\n$$L = \\bigl(g_{m1}R'\\bigr)\\bigl(g_{m2}r_{o2}\\bigr)>0,$$\n\nthe product of the two (negative) stage gains.\nWith capacitances $C_X,C_{out}$ the linearised characteristic\nequation is, in essence,\n$(sC_X+1/r_{o2})(sC_{out}+1/R')-g_{m1}g_{m2}=0$.\nIts determinant is negative, i.e. there is a right-half-plane\npole, when\n\n$$L=g_{m1}g_{m2}(R_{D1}\\parallel r_{o1})r_{o2}>1,$$\n\nwhich is normally true, since $g_mr_o\\gg1$.  Hence the\nboth-saturated operating point above is the metastable point\nof a latch, not a stable linear operating point.  The circuit\nregenerates to e.g. $V_{out}\\approx V_{DD}$, $V_X\\approx0$,\n$M_{1}$ off, $M_{2}$ in triode sinking $I_{in}$; the opposite\nstate is reached with a real, supply-limited $I_{in}$ source\nclamping $V_X$ high and $V_{out}$ low.\n\nIn short: formally a transimpedance $v_{out}/i_{in}\\approx1/g_{m2}$\nwith a small negative input (and output) resistance\n$-1/g_{m1}g_{m2}R_{D1}$.  With normal intrinsic gains\nit is a positive-feedback latch / negative-resistance element,\nuseful for regeneration, hysteresis and oscillation, and usable\nas a linear amplifier only if the loop gain is made $<1$, e.g.\nby a sufficiently low shunt resistance at node $X$.",
        "format": "markdown",
        "sha256": "ba4058190bbde8680dddc88a9ce468d95eba89b5cfacc02d3d1a3ddbbb3c24b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M2 as driven by Vout (not diode-connected), explains the positive-feedback loop, and gives its negative input resistance and unstable, latching behavior.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2202,
        "output_tokens": 18081,
        "total_tokens": 20283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2202,
        "output_tokens": 18081,
        "total_tokens": 20283,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two stage shunt-shunt feedback\ntransimpedance amplifier.  $M_{1}$ is a common gate input\ndevice, $M_{2}$ a common source gain device, $R_{F}$ returns\na current from the output to the input node.  $V_{b}$ is ac\nground.  Let the (small signal) voltage at the source of\n$M_{1}$ be $v_{in}$, at $X$ be $v_{x}$, at the output $v_{out}$.\nBody effect is absent for the symbols as drawn; for a common\nsubstrate replace $g_{m1}$ by $g_{m1}+g_{mb1}$ in what follows.\n\nIn dc, with $I_{in}$ the dc value of the input source,\n\n$$\\begin{aligned}\nv_{in0}&=V_{b}-V_{GS1}, \\qquad v_{x0}=V_{GS2}\\\\\nI_{D1}&=\\frac{V_{DD}-v_{x0}}{R_{D1}},\\qquad \nI_{D2}= \\frac{V_{DD}-v_{out0}}{R_{D2}}+\\frac{v_{in0}-v_{out0}}{R_{F}}\\\\\n\\frac{v_{in0}-v_{out0}}{R_{F}}&=I_{in0}+I_{D1}\n\\end{aligned}$$\ni.e. $R_{F}$ also carries bias current.  Saturation requires\n$v_{x}\\ge V_{b}-V_{TH1}$ for $M_{1}$ and $v_{out}\\ge v_{x}-V_{TH2}$\nfor $M_{2}$.\n\n### Small signal forward path\n\n$$\\begin{aligned}\ni_{d1}&=-g_{m1}v_{in}+\\frac{v_{x}-v_{in}}{r_{o1}}\\\\\ni_{d2}&=\\phantom{-}g_{m2}v_{x}+\\frac{v_{out}}{r_{o2}}\n\\end{aligned}$$\n\nNode $X$: $v_{x}/R_{D1}+i_{d1}=0$, whence\n\n$$\n \\frac{v_{x}}{v_{in}}=A_{1}\n      =\\Bigl(g_{m1}+\\frac1{r_{o1}}\\Bigr)\\bigl(R_{D1}\\!\\parallel\\! r_{o1}\\bigr)\n      \\approx g_{m1}\\bigl(R_{D1}\\!\\parallel\\! r_{o1}\\bigr) \\tag{1}\n$$\nthe usual non-inverting CG gain.  The resistance looking\ninto the source of $M_{1}$ alone, i.e. with $R_{F}$ removed, is\n\n$$\nR_{in,CG}=\\frac{v_{in}}{-i_{d1}}=\\frac{R_{D1}+r_{o1}}{1+g_{m1}r_{o1}}\n          =\\frac{R_{D1}}{A_{1}}\\approx\\frac1{g_{m1}} . \\tag{2}\n$$\n\nNode out, with $R_{2}=R_{D2}\\parallel r_{o2}$,\n\n$$\n\\frac{v_{out}}{R_{D2}}+i_{d2}+\\frac{v_{out}-v_{in}}{R_{F}}=0\n$$\n\n$$\n\\,v_{out}= \\bigl(R_{2}\\!\\parallel\\! R_{F}\\bigr)\n        \\left(\\frac{v_{in}}{R_{F}}-g_{m2}v_{x}\\right)\\,\n$$\n\ni.e. the (loaded) voltage gain from the input node is\n\n$$\n A_{v}\\equiv\\frac{v_{out}}{v_{in}}\n      =\\bigl(R_{2}\\!\\parallel\\! R_{F}\\bigr)\\Bigl(\\frac1{R_{F}}-g_{m2}A_{1}\\Bigr)\n      \\approx -g_{m2}A_{1}\\bigl(R_{2}\\!\\parallel\\! R_{F}\\bigr)\n      \\approx -g_{m1}g_{m2}(R_{D1}\\!\\parallel\\! r_{o1})(R_{D2}\\!\\parallel\\! r_{o2})  \\tag{3}\n$$\nfor $g_{m2}A_{1}R_{F}\\gg1$ and $R_{F}\\gg R_{2}$.  The $1/R_{F}$\nterm is the feedforward through $R_{F}$.  An increase in\n$v_{in}$ raises $v_{x}$ and lowers $v_{out}$: the loop\nthrough $R_{F}$ is negative.\n\n### Closed loop transimpedance and input resistance\n\nKCL at the input, with $i_{RF}$ taken from output to input\nas drawn,\n\n$$\nI_{in}+i_{RF}=-i_{d1}=\\frac{v_{in}}{R_{in,CG}},\\qquad\ni_{RF}=\\frac{v_{out}-v_{in}}{R_{F}}\n$$\n\nso that\n\n$$\n I_{in}= \\frac{v_{in}}{R_{in,CG}}+\\frac{v_{in}-v_{out}}{R_{F}}\n       =v_{in}\\!\\left[\\frac{A_{1}}{R_{D1}}+\\frac{1-A_{v}}{R_{F}}\\right]. \\tag{4}\n$$\n\nHence\n\n$$\n\\,R_{in}\\equiv\\frac{v_{in}}{I_{in}}\n      =\\frac{1}{\\,1/R_{in,CG}+ (1-A_{v})/R_{F}\\,}\n      =R_{in,CG}\\;\\Big\\|\\;\\frac{R_{F}}{1-A_{v}}\\,  \\tag{5}\n$$\n\nand the transimpedance is\n\n$$\n\\;\n{\\cal R}_{T}\\equiv\\frac{v_{out}}{I_{in}}=A_{v}R_{in}\n      =\\frac{A_{v}}{\\,1/R_{in,CG}+(1-A_{v})/R_{F}\\,}\n      =\\frac{-R_{F}}{\\,1-\\dfrac{1+R_{F}/R_{in,CG}}{A_{v}}\\,}\\;\n\\tag{6}\n$$\n\nWith $|A_{v}|\\gg 1+R_{F}/R_{in,CG}$, i.e. with effective loop\ngain\n\n$$\nT_{eff}\\approx\\frac{|A_{v}|}{R_{F}/R_{in,CG}}\n      \\approx\\frac{g_{m2}(R_{D1}\\!\\parallel\\! r_{o1})(R_{D2}\\!\\parallel\\! r_{o2})}{R_{F}}\\gg1,\n$$\n\n$$\\;{\\cal R}_{T}\\approx -R_{F},\\qquad \n       R_{in}\\approx\\frac{R_{in,CG}}{1+T_{eff}}\\approx\n       \\frac{1}{g_{m1}+ (1+|A_{v}|)/R_{F}}\\;  $$\n\nIn this limit $v_{in}=I_{in}R_{in}$ is very small - a quasi\nvirtual ground - and from $I_{in}+i_{RF}=v_{in}/R_{in,CG}$\n\n$$\ni_{RF}\\approx -I_{in},\n$$\n\ni.e. essentially all of $I_{in}$ flows (input to output) in\n$R_{F}$, producing $v_{out}\\approx-I_{in}R_{F}$; only the small\nerror current $v_{in}/R_{in,CG}$ enters $M_{1}$ and is amplified.\nIncreasing $R_{F}$ increases $|{\\cal R}_{T}|$ but decreases\n$T_{eff}$.\n\nFor $r_{o1},r_{o2}\\to\\infty$,\n$A_{1}=g_{m1}R_{D1}$, $R_{in,CG}=1/g_{m1}$,\n$A_{v}\\approx -g_{m1}g_{m2}R_{D1}(R_{D2}\\!\\parallel\\! R_{F})$.\n\n### Output resistance\n\nPut $I_{in}=0$ (input source open) and apply a test voltage\n$v_{t}$ at the output.  Then $v_{in}=v_{t}R_{in,CG}/(R_{in,CG}+R_{F})$,\n$v_{x}=A_{1}v_{in}$, and\n\n$$\n\\;\nR_{out}= \\frac{1}{\\,1/R_{2}+ \\dfrac{1+g_{m2}A_{1}R_{in,CG}}{R_{F}+R_{in,CG}}\\,}\n       =R_{2}\\;\\Big\\|\\;\\frac{R_{F}+R_{in,CG}}{1+g_{m2}R_{D1}}\n       \\approx (R_{D2}\\!\\parallel\\! r_{o2})\\;\\Big\\|\\;\\frac{R_{F}}{g_{m2}R_{D1}}\\;\n\\tag{7}\n$$\nsince $A_{1}R_{in,CG}=R_{D1}$.  Feedback lowers $R_{out}$ below\n$R_{D2}\\parallel r_{o2}$; with an external load replace\n$R_{D2}$ by $R_{D2}\\parallel R_{L}$ throughout.\n\nIn short: $M_{1}$ gives a $\\approx1/g_{m1}$ input termination and\nfirst voltage gain $g_{m1}R_{D1}$, $M_{2}$ gives the second,\ninverting, gain, and shunt-shunt feedback through $R_{F}$ sets\n$v_{out}/I_{in}\\approx -R_{F}$, and further lowers both $R_{in}$\nand $R_{out}$ by about the loop gain.  This is the standard\nlow-input-impedance TIA used e.g. at a photodiode input; the\npoles at $X$ and at the output are inside the loop, so in\npractice a small capacitor is usually placed across $R_{F}$\nfor stability.",
        "format": "markdown",
        "sha256": "8bf586db8a15a18038012d1f67ce322daa7685e08f7e65b6067f99039d7435c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from output to input forming a transimpedance amplifier. It also gives the expected −RF transimpedance and low input resistance.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2509,
        "output_tokens": 22735,
        "total_tokens": 25244,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20450,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2509,
        "output_tokens": 22735,
        "total_tokens": 25244,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20450,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two stage transimpedance amplifier\nwith shunt-shunt feedback.  $I_{in}$ is e.g. a photodiode\ncurrent.  Let $A$ be the input node, the source of $M_{1}$,\n$v_{a}$ its small signal voltage, $v_{x}$ the voltage at $X$ and\n$v_{o}$ the output voltage.  As drawn the bodies are tied to the\nsources, so there is no body effect.  $V_{b}$ and $V_{DD}$ are ac\ngrounds.\n\n$M_{1}$ is a common gate device, gate at the fixed bias $V_{b}$,\ndrain loaded by $R_{D1}$.  $M_{2}$ is a common source device,\ngate at $X$, drain loaded by $R_{D2}$.  $R_{F}$ returns a current\nproportional to $v_{o}$ to the input node $A$: output voltage\nsampling, current mixing at the input, i.e. shunt-shunt\nnegative feedback.  An increase of $i_{in}$ raises $v_{a}$,\nlowers $V_{GS1}$ and $I_{D1}$, raises $v_{x}$, raises $I_{D2}$ and\nlowers $v_{o}$; the current returned through $R_{F}$ opposes\n$i_{in}$.  $A$ is a low impedance, approximately virtual earth,\nnode.\n\nIn dc, with $M_{1,2}$ in saturation,\n$$\\begin{aligned}\nV_{A}&=V_{b}-V_{GS1}, &\nV_{X}&=V_{DD}-I_{D1}R_{D1}=V_{GS2},\\\\\nV_{out}&=V_{DD}-I_{D2}R_{D2},\n\\end{aligned}\\qquad \n\\begin{array}{ll}\nV_{X}\\ge V_{b}-V_{TH1}& M_{1}{\\rm \\ sat.}\\\\\nV_{out}\\ge V_{X}-V_{TH2}& M_{2}{\\rm \\ sat.}\n\\end{array}\n$$\n$R_{D1}$ thus sets $V_{GS2}$ and hence $I_{D2}$ for a given\n$I_{D1}$.  The usable $|i_{in}|$ is about the available output\nswing divided by $R_{F}$.\n\n### Small signal gain\n\nPut $R_{1}'=R_{D1}\\!\\parallel\\! r_{o1}$, $R_{2}'=R_{D2}\\!\\parallel\\! r_{o2}$\n($R_{2}'$ may include a load).  At $X$, $i_{d1}=-v_{x}/R_{D1}$ and\n\n$$ \n\\frac{v_{x}}{v_{a}}=\n\\frac{g_{m1}+r_{o1}^{-1}}{R_{D1}^{-1}+r_{o1}^{-1}}\n\\equiv A_{1}\\approx g_{m1}R_{1}' >0\n\\tag{1}\n$$\nthe usual CG voltage gain.  At the output, with\n$i_{RF}=(v_{o}-v_{a})/R_{F}$ in the direction shown,\n\n$$\n\\frac{v_{o}}{R_{D2}}+g_{m2}v_{x}+\\frac{v_{o}}{r_{o2}}\n      +\\frac{v_{o}-v_{a}}{R_{F}}=0\n$$\ni.e.\n$$\nA_{v}\\equiv\\frac{v_{o}}{v_{a}}\n      =-\\,\\bigl(g_{m2}A_{1}-R_{F}^{-1}\\bigr)\\,\n        \\bigl(R_{2}'\\!\\parallel\\! R_{F}\\bigr)\n      \\approx -g_{m2}R_{2}'A_{1}\n      \\approx -g_{m1}g_{m2}R_{1}'R_{2}'<0 .\n\\tag{2}\n$$\nThe CG stage gives the low input impedance and isolates the\nlarge input capacitance from the Miller effect of $M_{2}$;\n$M_{2}$ supplies most of the loop gain.\n\nKCL at $A$, the current into the source of $M_{1}$ being\n$v_{x}/R_{D1}$,\n\n$$\n i_{in}= \\frac{v_{x}}{R_{D1}}+\\frac{v_{a}-v_{o}}{R_{F}}\n       =v_{a}\\!\\left[G_{in1}+\\frac{1-A_{v}}{R_{F}}\\right],\n\\qquad \nG_{in1}\\equiv\\frac{A_{1}}{R_{D1}}\n      =\\frac{1+g_{m1}r_{o1}}{R_{D1}+r_{o1}} .\n\\tag{3}\n$$\n$1/G_{in1}=(R_{D1}+r_{o1})/(1+g_{m1}r_{o1})\\approx1/g_{m1}$ is the\nresistance looking into the source of $M_{1}$ with $R_{F}$ removed.\nHence the closed loop transimpedance is\n\n$$\n\\,R_{m}\\equiv\\frac{v_{o}}{i_{in}}\n      =\\frac{A_{v}}{\\,G_{in1}+(1-A_{v})/R_{F}\\,}\n      \\approx\n      -\\,\\frac{R_{F}}\n             {\\,1+\\dfrac{1+G_{in1}R_{F}}{|A_{v}|}\\,}\\,\n\\tag{4}\n$$\n\nwith loop gain, in this notation,\n$T\\approx |A_{v}|/(1+G_{in1}R_{F})$.\nFor $T\\gg1$, i.e. $g_{m1}g_{m2}R_{1}'R_{2}'\\gg 1+g_{m1}R_{F}$,\n\n$$\n\\,v_{o}/i_{in}\\;\\approx\\;-R_{F}\\,\n$$\n\nto an accuracy $\\sim 1/T$, essentially independent of\n$g_{m},R_{D},r_{o}$.  In particular $i_{RF}=(v_{o}-v_{a})/R_{F}\n\\approx -i_{in}$: incrementally almost all of $i_{in}$ flows\nin $R_{F}$, the source current of $M_{1}$ changing very little.\nThe minus sign is the reference direction of $i_{RF}$ in the\nfigure.\n\n### Input and output resistance\n\nFrom (3)\n\n$$\n\\,R_{in,cl}=\\frac{v_{a}}{i_{in}}\n   =\\frac{1}{G_{in1}+(1-A_{v})/R_{F}}\n   =\\Bigl(\\frac1{G_{in1}}\\Bigr)\\Big\\|\\frac{R_{F}}{1-A_{v}}\n   \\approx\\frac{R_{F}}{|A_{v}|}\\ll\\frac1{g_{m1}}\\,  .\n\\tag{5}\n$$\nShunt feedback at the input lowers the already low CG input\nresistance by $\\sim 1+T$.\n\nWith $i_{in}$ open, a test voltage at the output gives, for\n$r_{o}\\to\\infty$ for brevity,\n\n$$\nR_{out,cl}=\n\\left[\\frac1{R_{D2}}+\n\\frac{g_{m1}\\bigl(1+g_{m2}R_{D1}\\bigr)}{1+g_{m1}R_{F}}\n\\right]^{-1}\n\\approx\n\\bigl(R_{D2}\\!\\parallel\\! r_{o2}\\bigr)\\;\\Big\\|\\;\n\\frac{R_{F}+1/g_{m1}}{1+g_{m2}R_{1}'}\\;,\n\\tag{6}\n$$\ni.e. voltage sampling lowers the output resistance well below\n$R_{D2}\\!\\parallel\\! r_{o2}$.  Feedback also improves linearity\nand desensitises $R_{m}$ to device parameters, at the cost of\ngain set accurately, and essentially only, by $R_{F}$.\n\n### Frequency response, trade offs\n\nThere are poles at $A$, at $X$ and at the output,\n$$\\omega_{a}\\sim\\frac1{R_{in}C_{in}},\\qquad\n  \\omega_{x}\\sim\\frac1{R_{1}'C_{X}},\\qquad\n  \\omega_{o}\\sim\\frac1{R_{2}'C_{o}},$$\n$C_{in}$ being the photodiode plus $C_{gs1}$ capacitance,\n$C_{X}$ containing $C_{gs2}$ and the Miller multiplied\n$C_{gd2}$, $C_{o}$ the load capacitance.  Feedback moves the\ninput pole up by $\\approx 1+T$, but $\\omega_{x}$ and $\\omega_{o}$\nare inside the loop; if they approach the loop crossover the\nresponse peaks and can become unstable.  In practice a small\n$C_{F}$ is usually put across $R_{F}$ to compensate the\n$C_{in}$-$R_{F}$ pole.\n\nIncreasing $R_{F}$ increases $|R_{m}|$ directly, but lowers\n$T\\propto R_{F}^{-1}$ for large $R_{F}$, lowers bandwidth,\nand its thermal noise current $4kT/R_{F}$ is input referred\ndirectly.  Larger $g_{m1}$ lowers $R_{in}$, input referred\nnoise and the error in (4), at the cost of power and $C_{in}$.\nLarger $R_{D1}R_{D2}$ increase $|A_{v}|$ and $T$ but cost\nheadroom and lower $\\omega_{x},\\omega_{o}$.  This CG-CS\nshunt-feedback form is the standard wideband optical receiver\nfront end: $R_{m}\\approx-R_{F}$, very low $R_{in}$, low\n$R_{out}$, bandwidth largely set by $R_{F}C_{in}$ and the\n$X$ and output poles.  If $M_{1}$'s body is the common substrate,\nreplace $g_{m1}$ by $g_{m1}+g_{mb1}$ in $A_{1}$ and $G_{in1}$.",
        "format": "markdown",
        "sha256": "93faaa95f870591f062ee893cac861ff692ec4e0f3528fb8ac8130425ddcfc23"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative shunt-shunt feedback from output to input, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2509,
        "output_tokens": 28655,
        "total_tokens": 31164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2509,
        "output_tokens": 28655,
        "total_tokens": 31164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26294,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a two stage, shunt-shunt feedback\ntransimpedance amplifier.  $I_{in}$ is injected into a low\nimpedance node, $R_{F}$ returns a current proportional to\n$V_{out}$ to that node, and\n\n$$R_{m}\\equiv {V_{out}\\over I_{in}}\\approx -R_{F}\\qquad \n{\\rm for\\; large\\; loop\\; gain}$$\n\n$M_{1}$ is a common gate device, gate at a-c ground at $V_{b}$,\ninput at its source, output at its drain, node $X$.\n$M_{2}$ is a common source device, gate at $X$, output at its\ndrain.  Hence from the input node, call its small signal\nvoltage $v_{i}$, to $X$ the gain is positive, from $X$ to\n$V_{out}$ negative, and from $I_{in}$ to $V_{out}$ negative.\n$R_{F}$ is voltage sampling at the output and current mixing\nin shunt at the input: a voltage-shunt feedback amplifier\nwhose stabilized quantity is $V_{out}/I_{in}$.\n\n### Bias\n\nWith $V_{I}$ the d-c voltage at the source of $M_{1}$,\n\n$$\\begin{aligned}\nV_{GS1}&=V_{b}-V_{I}, & I_{D1}&=f(V_{GS1})\\\\\nV_{X}&=V_{DD}-I_{D1}R_{D1}\\\\\nV_{GS2}&=V_{X}, & I_{D2}&=f(V_{X})\\\\\nV_{out}&=V_{DD}-I_{D2}R_{D2}\\\\\nV_{I}-V_{out}&=(I_{D1}+I_{in,dc})R_{F}\n\\end{aligned}$$\n\nthe last being KCL at the input node; the d-c current of\n$M_{1}$ returns through $R_{F}$ to the output.  Saturation\nrequires in particular\n$V_{X}\\ge V_{b}-V_{TH1}$ for $M_{1}$ and\n$V_{out}\\ge V_{X}-V_{TH2}$ for $M_{2}$.  The $R_{F}$ loop\nstabilises this point: e.g. $V_{out}\\uparrow\\to$ more current\nreturned through $R_{F}$ to the input $\\to I_{D1}\\downarrow\\to\nV_{X}\\uparrow\\to I_{D2}\\uparrow\\to V_{out}\\downarrow$.\n\n### Small signal gain\n\nPut $g_{m1e}=g_{m1}+g_{mb1}$ if the bulk of $M_{1}$ is at\na-c ground, $g_{m1}$ if bulk is tied to its source.\n$V_{b}$ and $V_{DD}$ are a-c ground.  At node $X$,\n$i_{d1}=-v_{x}/R_{D1}$ and\n$i_{d1}=-g_{m1e}v_{i}+(v_{x}-v_{i})/r_{o1}$, i.e.\n\n$$ \n{v_{x}\\over v_{i}}\\equiv A_{X}=\n{(g_{m1e}r_{o1}+1)R_{D1}\\over R_{D1}+r_{o1}}\n\\;\\approx\\;g_{m1e}\\,(R_{D1}\\!\\parallel\\! r_{o1})>0\n$$\nthe familiar CG gain.  The resistance looking into the\nsource of $M_{1}$, with no $R_{F}$, is\n$$\nR_{C}={R_{D1}\\over A_{X}}=\n{R_{D1}+r_{o1}\\over g_{m1e}r_{o1}+1}\\approx {1\\over g_{m1e}} .\n$$\n\nAt the output, with $i_{RF}=(v_{out}-v_{i})/R_{F}$ in the\ndirection shown,\n$$\n{v_{out}\\over v_{i}}\\equiv A_{v}=\n{-g_{m2}A_{X}+1/R_{F}\\over \n1/R_{D2}+1/r_{o2}+1/R_{F}}\n\\;\\approx\\;-g_{m2}A_{X}\\,\n\\bigl(R_{D2}\\!\\parallel\\! r_{o2}\\!\\parallel\\! R_{F}\\bigr)<0 .\n$$\nThe $1/R_{F}$ term is the small non-inverting feedthrough\nthrough $R_{F}$.  Unloaded,\n$|A_{v0}|\\approx A_{1}A_{2}$ with\n$A_{1}\\approx g_{m1e}(R_{D1}\\!\\parallel\\! r_{o1})$,\n$A_{2}\\approx g_{m2}(R_{D2}\\!\\parallel\\! r_{o2})$.\n\nKCL at the input,\n$\\,i_{in}=v_{x}/R_{D1}+(v_{i}-v_{out})/R_{F}$, gives\n$$\n{ i_{in}\\over v_{i}}=\n{A_{X}\\over R_{D1}}+{1-A_{v}\\over R_{F}},\\qquad\nR_{in}={v_{i}\\over i_{in}}=\nR_{C}\\;\\Big\\|\\;{R_{F}\\over 1-A_{v}} \n$$\ni.e. the CG resistance $R_{C}$ in parallel with $R_{F}$\nMiller-shunted by the inverting gain to the output.\nThe (exact within this model) transresistance is\n$R_{m}=A_{v}R_{in}$.\n\nDefine the effective loop gain for current return\n$$\nT\\approx {|A_{v0}|R_{C}\\over R_{F}}\n      ={g_{m2}(R_{D2}\\!\\parallel\\! r_{o2})R_{D1}\\over R_{F}} .\n$$\nThen, for $g_{m}r_{o}\\gg1$,\n$$\n\\,R_{in}\\approx {R_{C}\\over 1+T}\\approx\n{{1/g_{m1e}}\\over 1+T}\\,,\\qquad\n\\,R_{m}\\approx -R_{F}\\,{T\\over 1+T}\n      =-\\Bigl[R_{F}\\;\\Big\\|\\;\n        g_{m2}R_{D1}(R_{D2}\\!\\parallel\\! r_{o2})\\Bigr]\\,  .\n$$\nFor $T\\gg1$, $R_{m}\\to -R_{F}$, $R_{in}\\to R_{F}/|A_{v0}|$,\n$v_{i}$ is almost clamped, and essentially all of\n$\\Delta i_{in}$ flows (opposite to the arrow shown) through\n$R_{F}$: $v_{out}\\approx -i_{in}R_{F}$.  The sign is as\nexpected: $i_{in}\\uparrow\\to v_{i}\\uparrow$ slightly $\\to\nI_{D1}\\downarrow\\to v_{X}\\uparrow\\to I_{D2}\\uparrow\\to\nv_{out}\\downarrow$, and $R_{F}$ returns this to the input,\nclosing a negative loop.  Feedback also improves linearity\nby $\\sim 1+T$.\n\nAt the output, with $I_{in}$ open,\n$$\nR_{out}=\n\\Bigl[{1\\over R_{D2}\\!\\parallel\\! r_{o2}}+\n{1+g_{m2}R_{D1}\\over R_{F}+R_{C}}\\Bigr]^{-1}\n\\;\\approx\\;R_{D2}\\!\\parallel\\! r_{o2}\\;\\;{\\rm for}\\;R_{F}\\ {\\rm large},\n$$\nin series with any external load $R_{L}\\parallel R_{D2}$.\n\n### Dynamics and tradeoffs\n\nThere are high impedance poles at $X$,\n$\\omega_{pX}\\!\\approx\\!1/[(R_{D1}\\!\\parallel\\! r_{o1})C_{X}]$\nwith $C_{X}$ including $C_{gs2}$ and Miller $C_{gd2}$, and at\nthe output,\n$\\omega_{po}\\!\\approx\\!1/[(R_{D2}\\!\\parallel\\! r_{o2})C_{out}]$,\nplus the input pole at the very low $R_{in}$ with the\n(source/photodiode) capacitance at the source of $M_{1}$ -\nthe reason for using a CG rather than a CS input.  Two\ngain poles inside the $R_{F}$ loop readily give peaking in\n$R_{m}(s)$; in practice a small $C_{F}$ across $R_{F}$ is\nused for compensation.  Increasing $R_{F}$ raises the\nideal $|R_{m}|$ but lowers $T$, $R_{in}$ falls less, bandwidth\nand phase margin suffer, and $4kT/R_{F}$ falls.  Increasing\n$R_{D1},R_{D2}$ or $g_{m2}$ raises $A_{v0}$ and $T$ at the\ncost of headroom and of the $X$ and output poles; increasing\n$g_{m1e}$ lowers $R_{C}$, the input pole resistance and the\ninput referred noise.  Noise referred to the input is\ndominated by $R_{F}$ and by $M_{1}$; noise of $M_{2},R_{D1},\nR_{D2}$ is referred back divided by the first stage gain\n$A_{X}$.",
        "format": "markdown",
        "sha256": "215ba37c6f23fdd7d3b9874619d83a50b096a051b4c2ddd3949fceadae2df046"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2406,
        "input_tokens": 2509,
        "output_tokens": 29065,
        "total_tokens": 31574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26806,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2406,
        "input_tokens": 2509,
        "output_tokens": 29065,
        "total_tokens": 31574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26806,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a shunt-shunt feedback transimpedance\namplifier.  The signal is a current injected at the low\nimpedance node $X$ and the output is the voltage at $Y\\equiv V_{out}$.\n\n$M_{1}$ is an NMOS common-gate device, $V_{b}$ being a dc bias.\n$M_{2}$ is a PMOS device with source to $V_{DD}$, gate to the\noutput and drain to the input node $X$.  The bodies are tied to\nthe sources, so to first order there is no body effect.\nCall the unlabelled current sink at $X$, $I_{B}$.  $I_{1}$ is the\ndrain load/bias of $M_{1}$.\n\nIntuitively $M_{2}$ is the feedback device.  It senses $v_{out}$\nand returns a current $g_{m2}v_{out}$ to the input node.  In\nequilibrium this returned current must cancel $i_{in}$, whence\n$v_{out}\\approx i_{in}/g_{m2}$.  $M_{1}$ and $M_{2}$ are also the\ncircuit known as a flipped voltage follower, used here as a\nshunt regulator at the input.\n\n### DC operating point\n\nAt the output node, with no dc load,\n\n$$ I_{D1}=I_{1} $$\n\nso $M_{1}$ is biased entirely by $I_{1}$.  Hence, $\\lambda=0$\nfor brevity,\n\n$$ V_{X}=V_{b}-V_{GS1},\\qquad \nV_{GS1}=V_{THN}+\\sqrt{\\frac{2I_{1}}{\\mu_nC_{ox}(W/L)_1}} $$\n\ni.e. the input node is held about a $V_{GS}$ below $V_{b}$, like\na source follower, but with very low impedance, see below.\nAt $X$\n\n$$ I_{D2}=I_{B}-I_{1}-I_{in,dc}>0 $$\n\nsets the current, and therefore $g_{m2}$, of the feedback device,\nand\n\n$$ V_{out}=V_{DD}-|V_{GS2}|,\\qquad \n|V_{GS2}|=|V_{THP}|+\\sqrt{\\frac{2I_{D2}}\n{\\mu_pC_{ox}(W/L)_2}}\\;. $$\n\nSaturation requires in particular\n\n$$ V_{out}\\ge V_{X}+V_{ov1}=V_{b}-V_{THN}\\quad (M_{1}),\\qquad\nV_{X}\\le V_{DD}-|V_{ov2}|\\quad (M_{2}),\\qquad \nV_{out}\\le V_{DD}-V_{ov,I_{1}}\\quad (I_{1}). $$\n\nA positive $i_{in}$ steals current from $M_{2}$: $I_{D2}$ falls,\n$|V_{GS2}|$ falls and $V_{out}$ rises.  The (class A) positive\nswing is limited by $M_{2}$ turning off, $i_{in}^{+}<I_{D2}$.\nA negative $i_{in}$ demands more $I_{D2}$, $V_{out}$ falls, and\nis limited by $M_{1}$ entering the triode region at\n$V_{out}\\approx V_{b}-V_{THN}$.\n\n### Small signal transresistance\n\nLet $R_{1}$ be the (finite) impedance of $I_{1}$, $R_{B}$ that of\n$I_{B}$, $r_{o1},r_{o2}$ the transistor output resistances, and\n$v_{x}$ the small signal voltage at $X$.  At $Y$\n\n$$ \\frac{v_{out}}{R_{1}}-g_{m1}v_{x}+\\frac{v_{out}-v_{x}}{r_{o1}}=0 $$\n\ni.e. a common-gate voltage gain from $X$ to $Y$\n\n$$ A\\equiv\\frac{v_{out}}{v_{x}}=\n\\frac{g_{m1}+r_{o1}^{-1}}{R_{1}^{-1}+r_{o1}^{-1}}\n\\approx g_{m1}\\,(R_{1}\\parallel r_{o1})\\;, $$\n$A=1+g_{m1}r_{o1}$ for an ideal $I_{1}$.  At $X$, KCL gives\n\n$$ i_{in}=g_{m2}v_{out}+\\frac{v_{out}}{R_{1}}\n      +v_{x}\\!\\left(\\frac1{r_{o2}}+\\frac1{R_{B}}\\right) \n      +\\text{(terms in }v_{out}/R_{1}\\text{ already included)} $$\n\nin compact form, with $v_{x}=v_{out}/A$,\n\n$$\\,R_{m}\\equiv\\frac{v_{out}}{i_{in}}\n      =\\frac{1}{\\,g_{m2}+R_{1}^{-1}+\n        \\dfrac{r_{o2}^{-1}+R_{B}^{-1}}{A}\\,}\\approx\\frac1{g_{m2}}\\,  $$\n\nfor $g_{m}r_{o}\\gg1$.  The sign is positive.  The gain is set\nnot by a resistor but by the feedback transistor: to cancel\n$i_{in}$ at $X$ the drain current of $M_{2}$ must change by\n$i_{in}$, i.e. $g_{m2}v_{out}\\approx i_{in}$.  E.g. $g_{m2}=1\\,{\\rm mS}$\ngives $R_m\\approx1\\,{\\rm k\\Omega}=60\\,{\\rm dB\\Omega}$, low, process\ndependent, and usually followed by a voltage gain stage.\n\nThe input node is a virtual earth.  Indeed\n\n$$ \\,R_{in}\\equiv\\frac{v_{x}}{i_{in}}=\\frac{R_{m}}{A}\n      \\approx\\frac{1}{g_{m2}\\,g_{m1}\\,(R_{1}\\parallel r_{o1})}\\,  $$\n\nfor ideal bias sources $R_{in}\\approx1/(g_{m1}g_{m2}r_{o1})$,\norders of magnitude below the $1/g_{m1}$ of a plain common\ngate stage.  The large loop gain, about\n$(g_{m1}r_{o1})(g_{m2}r_{o2})$ for ideal $I_{1}$ when the loop is\nbroken at the gate of $M_{2}$, is responsible.  A large\ncapacitance at the input, e.g. a photodiode, therefore sees\nonly a few to a few tens of ohms.\n\nShunt feedback at the output also makes the output resistance low.\nApplying a test voltage at $V_{out}$ gives, to first order,\n\n$$ R_{out}\\approx R_{1}\\parallel\\frac1{g_{m2}}\\approx\\frac1{g_{m2}}\\qquad(R_{1}\\ {\\rm large}) $$\n\nessentially the same number as $R_{m}$.  With a load $R_{L}$,\nreplace $R_{1}$ by $R_{1}\\parallel R_{L}$ above; $R_{m}\\approx1/g_{m2}$\nas long as $R_{L}\\gg1/g_{m2}$.\n\n### Frequency response and stability\n\nLet $C_{X}$ be the total capacitance at $X$ (input device,\n$C_{gs1}$, $C_{db2}$, etc.) and $C_{Y}$ that at $Y$ ($C_{db1}$,\n$C_{gs2}$, load, etc.), neglecting $r_{o}$ and feedforward\ncapacitors.  KCL at the two nodes gives\n\n$$ \\frac{V_{out}}{I_{in}}(s)\\approx\n\\frac{1/g_{m2}}\n{1+s\\dfrac{C_{Y}}{g_{m2}}+s^{2}\\dfrac{C_{X}C_{Y}}{g_{m1}g_{m2}} } $$\n\na two pole response with\n\n$$ \\omega_{0}=\\sqrt{\\frac{g_{m1}g_{m2}}{C_{X}C_{Y}}},\\qquad\nQ=\\sqrt{\\frac{g_{m2}C_{X}}{g_{m1}C_{Y}}}\\;. $$\n\nApproximately the poles are at $g_{m2}/C_{Y}$ and $g_{m1}/C_{X}$\nwhen well separated.  Large $C_{X}$ or small $C_{Y}$ makes\n$Q$ large: gain peaking, ringing, and, with the extra phase of\n$C_{gd2}$ bridging $X$ and $Y$ and other parasitics, possible\ninstability.  In practice $C_{Y}$ is often increased, at the\ncost of bandwidth $\\sim g_{m2}/C_{Y}$, to get $Q\\lesssim0.7$,\nor $g_{m1}$ is increased to push the input pole out.\nIncreasing $g_{m2}$ raises bandwidth and lowers $R_{in}$ and\n$R_{out}$, but lowers $R_{m}=1/g_{m2}$ - the usual gain-bandwidth\ntrade-off of a shunt-feedback TIA.\n\nIn summary: $M_{1}$ is a common-gate input device biased at\n$I_{1}$; $M_{2}$ provides local active shunt feedback from\noutput voltage to input current.  It presents\n$R_{in}\\approx1/(g_{m1}g_{m2}r_{o1})$, $R_{out}\\approx1/g_{m2}$ and\n$V_{out}/I_{in}\\approx1/g_{m2}$, with a second order response\nset by the input and output node capacitances.  It is widely\nused as a very wideband, low input impedance front end, e.g.\nfor photodiodes, at the price of low, $g_{m}$-determined\ntransresistance and of noise injected directly at $X$ by\n$M_{2}$ and the bias sources.",
        "format": "markdown",
        "sha256": "e4b65ad8bf1bf0d62d8349589c9293f095d27f858d558d5666f9b1479604c69e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS, M2 as the PMOS feedback device driven by Vout, and the feedback path to the input node; it gives the low input resistance and transimpedance approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2262,
        "output_tokens": 22919,
        "total_tokens": 25181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2262,
        "output_tokens": 22919,
        "total_tokens": 25181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The (unlabelled) sink at the input node is called $I_{B}$ below.\n$X$ is the input node, $v_{x}$ its small signal voltage.\n\n$$ \nM_{1}:{\\rm NMOS,\\ CG},\\qquad \nM_{2}:{\\rm PMOS,\\ source\\ to\\ }V_{DD}\n$$\n\n$M_{1}$ has fixed gate bias $V_{b}$, drain at $V_{out}$ loaded by\n$I_{1}$.  The gate of $M_{2}$ is $V_{out}$ and its drain is $X$.\n$M_{2}$ is a local shunt feedback device from the output node\nto the input node.  The $M_{1}$-$M_{2}$ pair is the flipped-voltage-\nfollower form of a regulated common-gate stage. It is a\nshunt-shunt feedback transimpedance stage.\n\n### 1.  Bias\n\nGate currents are zero, hence from KCL at the output node, exactly,\n\n$$ I_{D1}=I_{1}\\qquad\\Longrightarrow\\qquad I_{S1}=I_{1} $$\n\nand at $X$\n\n$$ I_{D2}=I_{B}-I_{1}-I_{in,Q}\\;>\\;0 $$\n\ni.e. $M_{2}$ carries whatever current $M_{1}$ and $I_{B}$ do not.\nIn saturation, to first order,\n\n$$\\begin{aligned}\nV_{GS1}&=V_{tn}+V_{ov1}, &\nV_{ov1}&=\\sqrt{\\frac{2I_{1}}{\\mu_nC_{ox}(W/L)_1}}\\\\\nV_{SG2}&=|V_{tp}|+V_{ov2}, &\nV_{ov2}&=\\sqrt{\\frac{2I_{D2}}{\\mu_pC_{ox}(W/L)_2}}\n\\end{aligned}$$\n\nso that\n\n$$\\;V_{XQ}=V_{b}-V_{GS1}\\;,\\qquad \n       \\;V_{out,Q}=V_{DD}-V_{SG2}\\;  $$\n\n$V_{X}$ is, to first order, independent of $I_{in}$: it is a\nregulated node.  Large signal,\n$V_{out}=V_{DD}-|V_{tp}|-\\sqrt{2(I_{B}-I_{1}-I_{in})/\\beta_{p2}}$,\nwhose incremental slope is $1/g_{m2}$ below.\nSaturation requires e.g.\n\n$$V_{out}-V_X\\ge V_{ov1}\\;\\;{\\rm i.e.}\\;\\;V_{out}\\ge V_b-V_{tn},\n\\qquad V_{DD}-V_X\\ge V_{ov2},$$\n\nplus compliance of $I_{1}$, $V_{DD}-V_{out}\\ge V_{ov,I1}$, and of\n$I_B$, $V_X\\ge V_{ov,B}$.  $I_{D2}>0$ sets the maximum positive\n$I_{in}$.\n\n### 2.  Low frequency small signal\n\nLet $\\tilde g_{1}=g_{m1}+g_{mb1}$ - the $g_{mb1}$ term is absent\nif the body of $M_{1}$ is tied to its source as drawn.  $M_{2}$\nhas body $=$ source, so no body effect.  Let $R_O$ be the\nresistance from the output node to a.c. ground, i.e. the\nresistance of $I_{1}$ in parallel with any load, and $R_B$ that\nof $I_B$.\n\n$$\\begin{aligned}\ni_{d1}&=-\\tilde g_{1}v_x+\\frac{v_{out}-v_x}{r_{o1}}\\\\\ni_{sd2}&=-g_{m2}v_{out}-\\frac{v_x}{r_{o2}}\n\\qquad\\text{(current $M_{2}$ delivers to $X$)}\n\\end{aligned}$$\n\nOutput KCL, $i_{d1}+v_{out}/R_O=0$, gives the source-to-drain\ngain of $M_{1}$\n\n$$ \nA_{xo}\\equiv\\frac{v_{out}}{v_x}\n      =\\frac{\\tilde g_{1}+1/r_{o1}}{1/R_O+1/r_{o1}}\n      =(1+\\tilde g_{1}r_{o1})\\,\\frac{R_O}{R_O+r_{o1}}\n      \\approx \\tilde g_{1}\\,(r_{o1}\\!\\parallel\\! R_O)  .\n$$\n\nInput KCL, $i_{in}=v_x/R_B-i_{sd2}-i_{d1}$, gives\n\n$$ i_{in}=v_x\\!\\left(\\frac1{R_B}+\\frac1{r_{o2}}\\right)\n      +v_{out}\\!\\left(g_{m2}+\\frac1{R_O}\\right) $$\n\nwhence the closed loop transimpedance\n\n$$\n\\,R_m\\equiv\\frac{v_{out}}{i_{in}}\n      =\\frac{1}{\\,g_{m2}+1/R_O+\n        \\dfrac{1/R_B+1/r_{o2}}{A_{xo}} }\\, \n$$\n\nFor ideal $I_{1},I_B$, $R_O,R_B\\to\\infty$, $A_{xo}=1+\\tilde g_{1}r_{o1}$,\n\n$$\nR_m=\\frac{1+\\tilde g_{1}r_{o1}}\n         {\\,1/r_{o2}+g_{m2}(1+\\tilde g_{1}r_{o1})\\,}\n    =\\frac{1}{g_{m2}+\\dfrac{1}{r_{o2}(1+\\tilde g_{1}r_{o1})}}\n    \\;\\approx\\;\\frac1{g_{m2}}\\;  .\n$$\n\nIt is non-inverting and intrinsically low: an increment of\n$i_{in}$ cannot go into $M_{1}$, whose current is fixed by\n$I_{1}$, nor into $I_B$; it must be taken up by $M_{2}$,\n$\\Delta i_{sd2}=-i_{in}$, requiring $\\Delta v_{out}=i_{in}/g_{m2}$.\n\nInput resistance, at $X$,\n\n$$\nR_{in}= \\frac{v_x}{i_{in}}=\\frac{R_m}{A_{xo}}\n     =\\frac{1}{\\,1/R_B+1/r_{o2}+(g_{m2}+1/R_O)A_{xo}\\,}\n$$\n\ni.e. with ideal sources, looking into the transistors,\n\n$$\n\\,R_{in,tr}= \\frac{1}{1/r_{o2}+g_{m2}(1+\\tilde g_{1}r_{o1})}\n      \\approx\\frac{1}{g_{m2}\\tilde g_{1}r_{o1}}\\,,\n\\qquad R_{in}=R_B\\parallel R_{in,tr}.\n$$\n\nThis is the ordinary CG value $\\sim1/\\tilde g_{1}$ divided by\nthe loop gain, below.  $v_x=i_{in}R_{in}$ is a very good\nvirtual earth.\n\nOutput resistance.  Applying a test source at $V_{out}$ with\n$i_{in}$ open gives, for ideal bias sources,\n\n$$\nR_{out,d}=\n\\frac{(1+\\tilde g_{1}r_{o1})+r_{o1}/r_{o2}}\n     {g_{m2}(1+\\tilde g_{1}r_{o1})+1/r_{o2}}\n\\;\\approx\\;\\frac1{g_{m2}},\n\\qquad\nR_{out}=R_{out,d}\\parallel r_{I1}\\parallel R_L\\approx\\frac1{g_{m2}} .\n$$\n\nThus the stage is low-impedance at both ports, with\n$R_m\\approx R_{out}\\approx1/g_{m2}$ and $R_{in}\\ll1/g_{m1}$.\n\nFeedback view: breaking the loop at the gate of $M_{2}$,\nthe return gain is\n\n$$ T_{0}\\approx g_{m2}\\,(r_{o1}\\parallel R_O)\\gg1, $$\n\nthe $M_{2}\\!\\to\\!X\\!\\to\\!M_{1}\\!\\to\\!V_{out}$ loop.\n$R_{in}\\approx (1/\\tilde g_{1})/(1+T_{0})$ and\n$R_m\\approx (r_{o1}\\!\\parallel\\!R_O)/(1+T_0)\\approx1/g_{m2}$,\nthe classic shunt-shunt results with feedback transconductance\n$g_{m2}$.\n\n### 3.  Frequency behaviour, limits\n\nWith $C_X$ the total capacitance at $X$ (photodiode/source\ncapacitance, $C_{gs1}$, $C_{db2}$) and $C_O$ that at the output\n($C_{gs2}$, $C_{db1}$, $C_L$, $I_{1}$ parasitics), neglecting\n$C_{gd1}$ feedforward and $r_{o2}$,\n\n$$\nR_m(s)\\approx\n\\frac{R_{D}/(1+g_{m2}R_D)}\n{1+s\\,\\dfrac{C_X/\\tilde g_{1}+R_DC_O}{1+g_{m2}R_D}\n   +s^{2}\\dfrac{C_XR_DC_O}{\\tilde g_{1}(1+g_{m2}R_D)}},\n\\qquad R_D=r_{o1}\\!\\parallel\\! r_{I1}.\n$$\n\nFor $g_{m2}R_D\\gg1$,\n\n$$ R_m(s)\\approx\\frac{1/g_{m2}}\n{1+s\\!\\left(\\frac{C_O}{g_{m2}}+\\frac{C_X}{\\tilde g_{1}g_{m2}R_D}\\right)\n +s^{2}\\frac{C_XC_O}{\\tilde g_{1}g_{m2}}},\\qquad\n\\omega_{0}\\approx\\sqrt{\\frac{\\tilde g_{1}g_{m2}}{C_XC_O}} .$$\n\nNominally the input pole is pushed to $\\approx1/R_{in}C_X$\nand the output pole to $\\approx g_{m2}/C_O$, both very high,\nwhich is why the circuit is used in front of a photodiode.\nIt is however a two-pole loop: for $C_X\\gg C_O$,\n$Q\\approx\\sqrt{(g_{m2}/\\tilde g_{1})(C_X/C_O)}$ can exceed\nunity, giving peaking/ringing unless $C_O$, $g_{m1}$ or\ncompensation is chosen accordingly.\n\nIn summary: $M_{1}$ is a current buffer with fixed current\n$I_{1}$, $M_{2}$ supplies the signal current to the input node\nunder control of $V_{out}$, giving a very low $R_{in}\\approx\n1/(g_{m1}g_{m2}r_{o1})$, a low $R_{out}\\approx1/g_{m2}$ and a\nmodest, well controlled transimpedance $v_{out}/i_{in}\\approx\n1/g_{m2}$, normally followed by a voltage-gain stage if large\ntransimpedance is required.",
        "format": "markdown",
        "sha256": "b0a461013eee733cbb90a3a86ab0edc4d0a00f7c54c3dcc3661b0708a7a4cdd8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device, traces the feedback to the input node, and gives the expected low input resistance and approximately 1/gm2 transimpedance/output resistance.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2262,
        "output_tokens": 28769,
        "total_tokens": 31031,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2262,
        "output_tokens": 28769,
        "total_tokens": 31031,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26182,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The node at the source of $M_{1}$ is the input node.\nCall it $X$, and call the (unlabelled) sink at $X$, $I_{B}$.\n\n$M_{1}$ is an NMOS common gate device, $V_{G1}=V_{b}$,\ndrain at $V_{out}$, source at $X$.  $M_{2}$ is a PMOS\ncommon source device, source at $V_{DD}$, gate at $V_{out}$,\ndrain at $X$.  $I_{1}$ is the (active) drain load of $M_{1}$.\n$I_{in}$ is injected into $X$ and $V_{out}$ is taken out:\nit is a current to voltage converter, i.e. a transimpedance\namplifier, with shunt-shunt feedback through $M_{2}$.\n\n### DC bias\n\nKCL at $V_{out}$, no d.c. load,\n\n$$ I_{D1}=I_{1} $$\n\nKCL at $X$, for $I_{in,dc}=0$,\n\n$$ I_{B}=I_{D1}+I_{D2}\\qquad\\Longrightarrow\\qquad \nI_{D2}=I_{B}-I_{1}>0 $$\n\nin the quiescent point.\nHence\n\n$$\\begin{aligned}\nI_{1}&\\approx \\tfrac12\\mu_nC_{ox}(W/L)_1\n\\bigl(V_b-V_X-V_{THN}\\bigr)^{2}  \\\\\nV_X &\\approx V_b-V_{THN}-V_{ov1},\\qquad \nV_{ov1}=\\sqrt{\\frac{2I_{1}}{\\mu_nC_{ox}(W/L)_1}}\n\\end{aligned}$$\n\ni.e. to first order $V_X$ is pinned by $V_b$ and $I_1$, and\n\n$$ I_{D2}\\approx \\tfrac12\\mu_pC_{ox}(W/L)_2\n\\bigl(V_{DD}-V_{out}-|V_{THP}|\\bigr)^{2},\\qquad\nV_{out}\\approx V_{DD}-|V_{THP}|-V_{ov2} .$$\n\nSaturation requires, e.g.,\n$V_{out}-V_X\\ge V_{ov1}$ for $M_1$ and\n$V_{DD}-V_X\\ge V_{ov2}$ for $M_2$.\n\nSignal intuition: $I_{D1}$ is fixed by $I_{1}$.  An extra\n$i_{in}$ at $X$ cannot go into $M_{1}$ or into $I_{B}$; it\nmust be compensated by a change in $I_{D2}$,\n$\\Delta I_{D2}\\approx -i_{in}$.  For the PMOS,\n$\\Delta I_{D2}=-g_{m2}\\Delta V_{out}$, so\n$\\Delta V_{out}\\approx i_{in}/g_{m2}$, positive.\n\n### Small signal\n\nLet $g_1=g_{m1}+g_{mb1}$; $M_1$ has body effect, body\nto ground, $M_2$ has body to $V_{DD}$, no body effect.\n$I_1,I_B$ are ideal, i.e. a.c. open.\n\nDrain currents, into $X$ for $M_2$ and into the drain for $M_1$,\n\n$$\\begin{aligned}\ni_{d1}&=-g_1v_x+\\frac{v_{out}-v_x}{r_{o1}}\\\\\ni_{d2}&=-g_{m2}v_{out}-\\frac{v_x}{r_{o2}}\\; .\n\\end{aligned}$$\n\nAt the (open) output node $i_{d1}=0$, whence\n\n$$0=-g_1v_x+\\frac{v_{out}-v_x}{r_{o1}},\\qquad \n\\frac{v_{out}}{v_x}=1+g_1r_{o1}\\equiv A_v $$\n\nthe intrinsic common-gate voltage gain from $X$ to the\noutput. At $X$, $i_{in}+i_{d1}+i_{d2}=0$, i.e. with $i_{d1}=0$\n\n$$ i_{in}=g_{m2}v_{out}+\\frac{v_x}{r_{o2}} .$$\n\nHence the closed loop transresistance\n\n$$\n\\,R_m\\equiv\\frac{v_{out}}{i_{in}}\n      =\\frac{1+g_1r_{o1}}{\\,g_{m2}\\bigl(1+g_1r_{o1}\\bigr)+1/r_{o2}\\,}\n      =\\frac{1}{g_{m2}}\\;\\Big\\|\\; \\bigl(1+g_1r_{o1}\\bigr)r_{o2}\n      \\;\\approx\\;\\frac1{g_{m2}}\\,  $$\n\nin the usual case $g_{m2}(1+g_1r_{o1})r_{o2}\\gg1$.\nThis is shunt-shunt feedback: $M_2$ samples $v_{out}$\nand returns the current $g_{m2}v_{out}$ to the input node.\nThe feedback factor is $g_{m2}$, the open-loop\ntransresistance is $A_vr_{o2}$, the loop gain is\n$g_{m2}A_vr_{o2}\\gg1$, and $R_m\\to1/g_{m2}$, set by\n$M_2$ bias and size, essentially independent of $r_o$'s.\n\nInput resistance, at $X$ with the output open,\n\n$$\n\\,R_{in}\\equiv\\frac{v_x}{i_{in}}\n      =\\frac{1}{\\,g_{m2}\\bigl(1+g_1r_{o1}\\bigr)+1/r_{o2}\\,}\n      \\approx\\frac{1}{g_{m2}(g_{m1}+g_{mb1})r_{o1}}\\,  $$\n\nvery small, much smaller than $1/g_{m1}$.  $X$ is an\napproximate virtual ground, $v_x=v_{out}/A_v$.  This is\nthe main attraction for e.g. a photodiode input: a large\ninput capacitance sees $R_{in}$ of tens of ohms.\n\nOutput resistance.  With $i_{in}$ open, applying $v_{test}$\nat the output,\n\n$$\nR_{out}=\n\\frac{g_1+1/r_{o1}+1/r_{o2}}\n     {\\,g_{m2}\\!\\left(g_1+1/r_{o1}\\right)+1/r_{o1}r_{o2}\\,}\n\\;\\approx\\;\\frac1{g_{m2}}\\;,\n$$\n\nagain lowered by the $M_2$--$M_1$ loop from the\n$r_{o1},r_{o2}$ level to $\\approx 1/g_{m2}$.  A finite\nresistance $R_{I1}$ of $I_{1}$, or a load $R_L$, appears\nin parallel with this and with $R_m$:\n$R_m\\approx (1/g_{m2})\\|R_{I1}\\|R_L\\|A_vr_{o2}$.\n\nIn words: $M_1$ and $I_1$ give a large voltage gain\n$A_v\\approx (g_{m1}+g_{mb1})r_{o1}$ from the low\nimpedance input node to $V_{out}$; PMOS $M_2$ feeds\nessentially all of a signal input current back as\n$g_{m2}v_{out}$, fixing $v_{out}/i_{in}\\approx1/g_{m2}$,\nand dividing the input (and output) impedance by\nroughly the loop gain.  Positive $i_{in}$ is limited\nto about $I_{D2Q}$, when $M_2$ turns off; negative\n$i_{in}$ is limited by $V_{out}$ falling to\n$V_X+V_{ov1}$, putting $M_1$ in triode. ∎",
        "format": "markdown",
        "sha256": "f783ecd76a839de7fb65cd1bc5ed146679fc486c6e26ca02dbcd75f4ed34ba1c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and derives very low input resistance with transimpedance and output resistance approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2262,
        "output_tokens": 20202,
        "total_tokens": 22464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2262,
        "output_tokens": 20202,
        "total_tokens": 22464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18299,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. Increasing all three load capacitors only reduces the oscillation frequency.\n\nModel each inverter near its switching point by a voltage gain $-A_0$ and output resistance $R_{\\text{out}}$. The transfer function of one loaded stage is\n\n$$ \n\\frac{V_{out}}{V_{in}} = \\frac{-A_0}{1 + s R_{\\text{out}} C_L}  $$\n\nFor oscillation, the three inversions provide $180^\\circ$, so each $RC$ pole must provide an additional $60^\\circ$:\n\n$$\n\\tan^{-1}\\left(\\omega_{\\text{osc}} R_{\\text{out}} C_L\\right) = 60^\\circ\n\\quad \\Longrightarrow \\quad\n\\omega_{\\text{osc}} = \\frac{\\sqrt{3}}{R_{\\text{out}} C_L}\n$$\n\nAt this frequency, each stage's magnitude is $A_0 / \\sqrt{1 + (\\omega_{\\text{osc}} R C_L)^2} = A_0/2$, so the start-up condition is $A_0 > 2$ — independent of $C_L$. A CMOS inverter easily satisfies this at its trip point.\n\nEquivalently, in large-signal terms the propagation delay $t_p \\propto C_L$, so the period $T \\approx 6\\,t_p \\propto C_L$.\n\n**Conclusion:** the circuit still oscillates for any finite $C_L$; the frequency simply falls as $1/C_L$.",
        "format": "markdown",
        "sha256": "67cbfef5453c52123c1814d52d10098bf8bb35c56f38056a7ca2565239e0b969"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that loading all three nodes lowers the oscillation frequency without preventing oscillation. Its small-signal phase and gain conditions, as well as the delay argument, match the golden solution.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 4309,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 4309,
        "total_tokens": 6587,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3888,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The only d-c point of the odd ring is the metastable point\n$V_1=V_2=V_3=V_M$, the switching voltage of an inverter.  There is\nno self-consistent logic state.\n\nLinearize an inverter about $V_M$ as $-g_m$ in parallel with\n$r_o$, loaded by $C_L$.  One stage is\n\n$$A(s)= -\\,\\frac{g_mr_o}{1+s r_oC_L}\\equiv -\\frac{A_0}{1+s/\\omega_p},\n\\qquad \n\\omega_p=\\frac1{r_oC_L},\\;\\; A_0=g_mr_o .$$\n\nAround the ring $[-A(s)]^{3}=1$, i.e.\n\n$$(1+s/\\omega_p)^{3}=-A_0^{3},$$\n\n$$ \\frac{s}{\\omega_p}=-1+A_0e^{j\\pi/3},\\;-1+A_0e^{j\\pi},\\;-1+A_0e^{j5\\pi/3} $$\n\nso that a pair of poles is at\n\n$$s=\\omega_p\\Bigl(-1+\\frac{A_0}{2}\\pm j\\frac{\\sqrt3}{2}A_0\\Bigr).$$\n\nThey are in the right half plane iff\n\n$$A_0=g_m r_o>2,$$\n\nthe usual Barkhausen condition for a 3-stage ring: at oscillation\neach pole contributes $60^{\\circ}$ of lag at $\\omega_{osc}=\\sqrt3\\,\\omega_p$,\nwhere $|A|=A_0/2$.  A CMOS inverter biased at $V_M$, with both\ndevices saturated, has $(g_{mn}+g_{mp})(r_{on}\\!\\parallel\\! r_{op})\\gg2$.\n\n$C_L$ enters only through $\\omega_p=1/r_oC_L$.  Increasing $C_L$\nscales all the ring poles toward the origin by $1/C_L$; it does\nnot move the right-half-plane pair into the left half plane.\nIn large-signal terms a transition simply takes\n$\\Delta t\\sim C_LV_M/I_D$ to slew the next stage through its\nthreshold, and this transition propagates around the ring forever.\n\nHence, for any finite $C_L$, the circuit still oscillates, only\nmore slowly, e.g. in the linear model\n$\\;\\omega_{osc}\\approx \\sqrt3/r_oC_L$, and rail-to-rail\n$T_{osc}\\propto C_L$.  As $C_L\\to\\infty$, $f_{osc}\\to0$, but the\noscillation is not quenched.",
        "format": "markdown",
        "sha256": "9df9d3473782e2469104c44329653999ef635ed8ffcdeede79a0266d65e2b7bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal loading on all three nodes lowers the oscillation frequency without quenching oscillation, and supports this with a small-signal analysis showing the instability condition is independent of capacitance. Minor notation and frequency-approximation imprecision does not change the essential result.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2278,
        "output_tokens": 4759,
        "total_tokens": 7037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2278,
        "output_tokens": 4759,
        "total_tokens": 7037,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. A large $C_L$ only lowers the frequency of\noscillation.\n\nModel an inverter about its switching point by its\nsmall signal gain and its output pole,\n\n$$\nA(s)=\\frac{V_{o}}{V_{i}}= -\\,\\frac{A_{0}}{1+s/\\omega_{p}}\\qquad \nA_{0}=g_{m}r_{o},\\qquad \n\\omega_{p}=\\frac{1}{r_{o}C_{L}} .\n$$\n\nBreaking the ring, the return ratio for the three identical\nstages is\n\n$$\nL(s)=A(s)^{3}= \\left[-\\frac{A_{0}}{1+s/\\omega_{p}}\\right]^{3}.\n$$\n\nEach stage contributes $180^{\\circ}$ from the inversion and\n$-\\tan^{-1}(\\omega/\\omega_{p})$ from the output pole. For a mode\nof the ring the total phase around the loop must be $0\\pmod{2\\pi}$,\ni.e. the three poles must supply $180^{\\circ}$ in all, $60^{\\circ}$\nper stage:\n\n$$\n3\\tan^{-1}\\frac{\\omega_{osc}}{\\omega_{p}}=\\pi\n\\qquad\\Longrightarrow\\qquad \n\\tan^{-1}\\frac{\\omega_{osc}}{\\omega_{p}}=60^{\\circ},\n$$\n\n$$\n\\;\\omega_{osc}= \\sqrt{3}\\,\\omega_{p}= \\frac{\\sqrt{3}}{r_{o}C_{L}}\\;\n$$\n\nAt this frequency the magnitude contributed by one stage is\n\n$$\n|A(j\\omega_{osc})|=\n\\frac{A_{0}}{\\sqrt{1+(\\omega_{osc}/\\omega_{p})^{2}}}\n= \\frac{A_{0}}{\\sqrt{1+3}}=\\frac{A_{0}}{2},\n$$\n\nso that the loop magnitude at the phase condition is\n$(A_{0}/2)^{3}$, independent of $C_{L}$.  Oscillation starts up\niff $A_{0}>2$, satisfied by a normal CMOS inverter, whatever\n(finite) $C_{L}$ is.  Increasing $C_{L}$ moves $\\omega_{p}$ down,\nbut $\\omega_{osc}$ moves down in the same proportion, always\nkeeping $60^{\\circ}$ of pole phase per stage and the same gain.\n\nIn large-signal terms there is no stable d-c point consistent\nwith an odd number of inversions in the loop; the common\nthreshold point is unstable for $A_{0}>2$.  A large $C_{L}$ merely\nmakes the nodes slew more slowly,\n$T_{osc}\\propto C_{L}V_{DD}/I_{D}\\propto C_{L}$, so $f_{osc}\\to0$ as\n$C_{L}\\to\\infty$, but for any finite $C_{L}$ the circuit still\noscillates rail to rail.",
        "format": "markdown",
        "sha256": "cfc1a14d308d81e0cf7c0bce16d347d8cd6d27cd348e28749934c40fa2096d54"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency and supports it with a valid small-signal phase and gain analysis. Increasing all three capacitances lowers the pole and oscillation frequencies proportionally without changing the oscillation condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 3644,
        "total_tokens": 5922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2278,
        "output_tokens": 3644,
        "total_tokens": 5922,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2947,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The swing and the devices are unchanged, so the\nnormalized waveforms at the three nodes are unchanged; they\nare simply stretched in time.\n\nFor one stage\n$$\nt_{p}\\propto R_{eq}C_{L}\\qquad\\Longrightarrow\\qquad \nf_{0}\\approx \\frac{1}{2Nt_{p}}\\propto \\frac1{C_{L}}\n$$\nso that, for $C_{L}\\gg C_{par}$\n$$\nC_{L}\\to 2C_{L}\\;\\;\\Longrightarrow\\;\\; f_{0}\\to \\frac{f_{0}}2 .\n$$\nThe energy taken from the supply per transition is\n$C_{L}V_{DD}^{2}$, at a rate $f_{0}$; hence\n$$\nP_{tot}\\approx NC_{L}V_{DD}^{2}f_{0}\n$$\nis unchanged, and the $Q$ of the ring, which depends\nessentially only on $N$, is unchanged.\n\nIn Leeson/Hajimiri form, at a fixed offset $\\Delta f$,\n$$\n{\\cal L}(\\Delta f)\\;\\propto\\;\n\\frac{1}{P}\\left(\\frac{f_{0}}{\\Delta f}\\right)^{2}\n\\;\\propto\\;\n\\frac{\\;\\overline{i_{n}^{2}}\\;\\Gamma_{rms}^{2}}\n     {\\,q_{\\max }^{2}\\,\\Delta f^{2}},\n\\qquad q_{\\max}\\approx C_{L}V_{DD}.\n$$\n$\\overline{i_{n}^{2}}$ and $\\Gamma_{rms}$ are unchanged\nbecause the transistors and the normalized waveform are\nunchanged, whereas $q_{\\max}$ doubles.  Hence\n$$\n\\frac{{\\cal L}'(\\Delta f)}{{\\cal L}(\\Delta f)}\n   =\\left(\\frac{f_{0}'}{f_{0}}\\right)^{2}\n   =\\frac1{4},\n$$\ni.e. about $6\\,{\\rm dB}$ lower phase noise at the same\nabsolute offset frequency, in dBc/Hz.  The oscillator\nfigure of merit is unchanged; at an offset scaled in\nproportion to the new $f_{0}$ the value is the same.",
        "format": "markdown",
        "sha256": "0c4f0e8567c4f321bb40f86c58b8199b01d6f122777292d0b1aa908f6f0d32ae"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the capacitors halves the oscillation frequency and lowers phase noise by about 6 dB at a fixed offset, with no change at a fixed relative offset. The frequency-squared scaling and charge argument support the result.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7398,
        "total_tokens": 9674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6773,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7398,
        "total_tokens": 9674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6773,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "For the inverters let the (first order) stage delay be\n\n$$t_{d}\\approx \\frac{C_{L}V_{DD}}{I_{D}}\\qquad \nf_{0}\\approx \\frac{1}{2Nt_{d}}\\;\\;,\\;\\; N=3 $$\n\nwith a rail to rail swing.  Doubling $C_{L}$, with the devices\nunchanged,\n\n* $t_{d}$ doubles, $$f_{0}\\;\\to\\;f_{0}/2$$\n* the swing, the device $g_{m}$'s and the device noise are\nunchanged in normalized time,\n* the effective $Q$ of the $N$ stage ring,\n$Q\\approx \\tfrac N4\\tan \\pi/N$, is unchanged,\n* the (dynamic) power\n$$P\\approx N C_{L}V_{DD}^{2}f_{0}$$\nis, to first order, unchanged.\n\nIn Leeson/Hajimiri form, at a fixed (absolute) offset $\\Delta\\omega$,\n\n$${\\cal L}(\\Delta\\omega)\\;\\propto\\;\n\\frac{FkT}{P}\\left(\\frac{\\omega_{0}}{2Q\\,\\Delta\\omega}\\right)^{2}\n\\;\\propto\\;\n\\frac{\\;\\overline{i_{n}^{2}}\\;\\Gamma_{\\rm rms}^{2}}\n     {q_{\\max }^{2}\\,\\Delta\\omega^{2}}\\;,$$\n\nwith the maximum charge swing on a node\n\n$$q_{\\max}=C_{L}V_{DD} .$$\n\n$\\Gamma_{\\rm rms}$, $F$ and $\\overline{i_{n}^{2}}$ are functions of\nthe normalized waveform, hence unchanged.  $q_{\\max}$ doubles,\n$\\omega_{0}$ halves. Hence at the same absolute $\\Delta f$\n\n$${\\cal L}(\\Delta\\omega)\\;\\to\\;\\frac14\\,{\\cal L}(\\Delta\\omega)$$\n\ni.e. about $6\\,{\\rm dB}$ lower phase noise, in both the\n$1/\\Delta f^{2}$ and $1/\\Delta f^{3}$ regions.  Plotted versus\n$\\Delta f/f_{0}$ the curve is unchanged: the oscillator FOM is\nunchanged.",
        "format": "markdown",
        "sha256": "cc30cbce4210f6db2dd6bec3d2ccf95c938f2471fd66f1d73dbdd257a5b64e98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly predicts that doubling the capacitors halves the oscillation frequency and reduces phase noise by a factor of four (about 6 dB) at a fixed absolute offset, with a supporting charge-based argument.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7623,
        "total_tokens": 9899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7623,
        "total_tokens": 9899,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The inverters, and hence their bias currents and voltage swing, are unchanged.\n\nThe stage delay is approximately\n\n$$t_p \\propto \\frac{C_LV_{DD}}{I_D}$$\n\nso doubling every $C_L$ doubles $t_p$ and therefore\n\n$$f_{0,\\rm new}=\\frac{f_0}{2},\\qquad T_{0,\\rm new}=2T_0 .$$\n\nThe dynamic power\n\n$$P \\approx 3C_LV_{DD}^{2}f_0$$\n\nis unchanged, since $C_L$ doubles while $f_0$ halves.\n\nFrom Hajimiri's model, at a fixed absolute offset $\\Delta f$,\n\n$${\\cal L}(\\Delta f)\\propto \n\\frac{\\Gamma_{\\rm rms}^{2}\\,\\overline{i_n^{2}}}\n     {q_{\\max }^{2}(2\\pi\\Delta f)^2},\n\\qquad \nq_{\\max}=C_LV_{DD} .$$\n\nThe waveform as a function of phase, $\\Gamma_{\\rm rms}$, and the device noise currents are unchanged, whereas $q_{\\max}$ doubles. Hence\n\n$${\\cal L}_{\\rm new}(\\Delta f)=\\frac{1}{4}{\\cal L}_{\\rm old}(\\Delta f)$$\n\ni.e. about **6 dB lower phase noise at the same absolute offset frequency**, essentially because the carrier frequency has halved. Normalized to the same $\\Delta f/f_0$, the phase noise and oscillator FOM are unchanged.",
        "format": "markdown",
        "sha256": "95981f1344b658eae749797547957ae6a7d1bcb209ab6c860dce7d369b6b3c1f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors doubles stage delay and halves the oscillation frequency, yielding about 6 dB lower phase noise at a fixed absolute offset. This matches the golden solution; the fixed-relative-offset statement is also consistent.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2276,
        "output_tokens": 6285,
        "total_tokens": 8561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5787,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2276,
        "output_tokens": 6285,
        "total_tokens": 8561,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5787,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. In the ideal gate--delay model the period would simply\ngrow $\\propto C_L$, but that model breaks down when the edge\nat the $C_L$ node becomes much slower than the other delays.\n\nLabel the $C_L$ node $x$, and the other two nodes $y,z$.\nFor $C_L$ very large, $x$ moves on a time scale\n$\\sim R_{out}C_L$ much longer than the propagation time of the\nother inverters. Hence, on the time scale of $x$, the other\ninverters simply follow their static voltage transfer\ncharacteristic $f(\\cdot)$, which is decreasing, saturates at\nthe rails, and crosses $V_{in}=V_{out}$ at $V_M\\approx V_{DD}/2$:\n\n$$\ny=f(x),\\qquad z=f(y),\\qquad \n\\text{drive to }x = f(z)=f\\!\\bigl(f\\!\\bigl(f(x)\\bigr)\\bigr)\\equiv F(x).\n$$\n\nThe dynamics of the only slow node are first order,\n\n$$\nC_L\\frac{dx}{dt}\\;\\propto\\;F(x)-x .\n$$\n\n$F$ is again a decreasing inverter-like characteristic, with\na unique intersection with $F(x)=x$ at $x=V_M$. If $x<V_M$,\nthen $F(x)>x$ and the first inverter pulls $x$ up; if\n$x>V_M$, then $F(x)<x$ and it pulls $x$ down. So $V_M$ is an\nattracting fixed point, and a first-order system cannot\nsustain a limit cycle. Any transient ringing decays.\n\nIn small-signal terms, each inverter is $-A_0/(1+s\\tau_i)$,\nand the closed-loop poles satisfy\n\n$$\n(1+s\\tau_L)(1+s\\tau_0)^2+A_0^{3}=0 .\n$$\n\nBy Routh-Hurwitz this becomes stable for\n$\\tau_L/\\tau_0 \\gtrsim (1+A_0^{3})/2$, i.e. for sufficiently\nlarge $C_L$. The large capacitor is dominant-pole\ncompensation for what is, at dc, a three-inversion negative\nfeedback loop: the excess phase can no longer reach\n$180^\\circ$ with loop gain $\\ge 1$.\n\nThus for arbitrarily large $C_L$ the ring does not oscillate.\nIt settles with all three nodes at about the inverter\nswitching voltage $V_M$, all inverters on in their\nhigh-gain region.",
        "format": "markdown",
        "sha256": "035c409d6a1a72b9a429ba30c3f86c0656daa7807d68c95533460bcc631e405e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node creates a dominant pole, causing the loop to lose oscillation and settle near a DC operating point. The time-domain and loop-stability explanations match the golden solution; the approximate threshold detail does not alter the conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7205,
        "total_tokens": 9481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7205,
        "total_tokens": 9481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. The naive delay argument, that a larger $C_L$ only makes\nthe period longer, assumes ideal logic gates. A real inverter is\na finite-gain amplifier with a finite output resistance.\n\nLet $X$ be the node loaded by $C_L$, and let $C_p$ be the\nordinary parasitic capacitance at the other two nodes.\nNear its switching voltage $V_M$ an inverter can be modelled as\n\n$$ -\\,\\frac{A_0}{1+s/\\omega_p}\\qquad \n\\omega_p=\\frac1{R_oC_p}$$\n\nfor the two unloaded stages, and\n\n$$ -\\,\\frac{A_0}{1+s/\\omega_L}\\qquad \n\\omega_L=\\frac1{R_oC_L}\\ll \\omega_p$$\n\nfor the stage driving $C_L$. $A_0$ is the low frequency\nmagnitude of the inverter gain.\n\nThe three inversions contribute $3\\times180^{\\circ}$ around\nthe loop. For oscillation the three $RC$ poles must supply\nanother $180^{\\circ}$ at a frequency at which the loop gain\nmagnitude is at least unity.\n\nThe loaded pole can supply at most $90^{\\circ}$. Hence the\nother $180^{\\circ}-90^{\\circ}$ must come from the two fast\npoles, requiring a frequency of order $\\omega_p$ or higher:\nfor $\\omega<\\omega_p$ the total pole lag is\n$<90^{\\circ}+45^{\\circ}+45^{\\circ}=180^{\\circ}$.\n\nBut at $\\omega\\gtrsim\\omega_p$,\n\n* the two fast stages have magnitudes $\\lesssim A_0/\\sqrt2$ each,\n* the loaded stage has magnitude\n  $$\\frac{A_0}{\\sqrt{1+(\\omega/\\omega_L)^2}}\n   \\approx A_0\\frac{\\omega_L}{\\omega}\n   \\lesssim A_0\\frac{\\omega_L}{\\omega_p}\n   =A_0\\frac{C_p}{C_L}.$$\n\nThus the loop gain magnitude at any frequency where the\nphase condition can be met is at most\n\n$$|L| \\;\\lesssim\\; A_0^{3}\\,\\frac{C_p}{C_L}\\,\\frac12 .$$\n\nFor $C_L \\gtrsim \\tfrac12 A_0^{3}C_p$ this is $<1$, and for\nstill larger $C_L$ it tends to zero. Barkhausen's criterion\ncan never be satisfied.\n\nIn time-domain terms, $X$ then moves so slowly that\ninverters 2 and 3 act as an essentially instantaneous\nnon-inverting buffer from $X$ back to the input of inverter 1.\nInverter 1 therefore has its output fed back to its own\ninput, a stable connection. The only dc solution,\n$V_1=V_2=V_3=V_M$, becomes stable: perturbations decay\ninstead of growing into a limit cycle. The ring settles\nwith all inverters biased in their transition region,\ndrawing static current, and does not oscillate.",
        "format": "markdown",
        "sha256": "8894956f893a6d01837b9b247a22e9af2ddc044afaf87518f1cfd39fb60131ce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that an arbitrarily large capacitor on one node creates a dominant pole, causing sufficient loop-gain roll-off that the Barkhausen condition cannot be met. The phase/gain and time-domain explanations are consistent with the essential result.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 9305,
        "total_tokens": 11581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 9305,
        "total_tokens": 11581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8481,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes. It does not merely oscillate more slowly; beyond a certain\n$C_L$ oscillation is quenched altogether.\n\nLinearise the inverters about their switching voltage $V_M$.\nLet a stage have (magnitude of) low-frequency gain $A_v=g_mr_o$ and\noutput resistance $r_o$. Let $C_0$ be the normal node capacitance,\n$\\tau_0=r_oC_0$, and for the loaded node $\\tau_L=r_o(C_L+C_0)\\approx\nr_oC_L$.\n\nThe closed-loop characteristic equation is\n\n$$\n\\bigl(1+s\\tau_L\\bigr)\\bigl(1+s\\tau_0\\bigr)^2 + A_v^{\\,3}=0,\n$$\n\ni.e.\n\n$$\na_3s^3+a_2s^2+a_1s+a_0=0\n$$\n\nwith\n\n$$\n\\begin{aligned}\na_3&=\\tau_L\\tau_0^2, &\na_2&=\\tau_0^2+2\\tau_L\\tau_0,\\\\\na_1&=\\tau_L+2\\tau_0, &\na_0&=1+A_v^3 .\n\\end{aligned}\n$$\n\nBy Routh–Hurwitz the $V_M$ equilibrium is stable iff\n$a_2a_1>a_3a_0$. But as $\\tau_L\\to\\infty$,\n\n$$\n\\frac{a_2a_1}{a_3a_0}\n\\;\\approx\\;\n\\frac{(2\\tau_L\\tau_0)(\\tau_L)}{\\tau_L\\tau_0^2(1+A_v^3)}\n= \\frac{2\\tau_L}{\\tau_0(1+A_v^3)}\\;\\longrightarrow\\;\\infty .\n$$\n\nSo for sufficiently large $C_L$ (roughly $\\tau_L/\\tau_0\\gtrsim A_v^3/2$)\nall closed-loop poles move into the left half-plane: the metastable\npoint becomes *stable*.\n\nPhysically: with $C_L$ huge, node $B$ moves so slowly that the second\nand third inverters follow it quasi-statically and stay in their\nhigh-gain region. The loop then behaves like a single dominant-pole\nstage in negative feedback, not like three rail-to-rail logic gates\nchasing each other. A small rise of $B$ above $V_M$ is amplified\n(non-inverted) through inverters 2 and 3 to the input of inverter 1,\nwhich pulls $B$ back down, and vice versa — with no overshoot, because\nthe motion of $B$ is essentially first order.\n\nHence for arbitrarily large $C_L$ the circuit settles to\n\n$$\nV_A \\approx V_B \\approx V_C \\approx V_M,\n$$\n\nwith all inverters biased in their transition region, and does not\noscillate.",
        "format": "markdown",
        "sha256": "2aec480d6ecfd7215148936b04be399d9da8f8c68c537b065b04d9231e5143db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that an arbitrarily large load on one node can quench oscillation, and explains it through the slow dominant-pole node and settling to a stable transition-point equilibrium. The small-signal stability analysis supports the golden solution’s mechanism; the approximate threshold does not change the conclusion.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7088,
        "total_tokens": 9364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2276,
        "output_tokens": 7088,
        "total_tokens": 9364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6314,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the 3 stage single ended CMOS ring.\nTo first order its waveform is unchanged by a uniform\ndevice scaling.\n\nFor one stage\n\n$$ t_{d}\\;\\propto\\;{C_{L}V_{DD}\\over I_{D}} $$\n\n$C_{L}$ is the gate capacitance of the following stage\nplus the drain capacitances of the present stage.\nDoubling $W_{n}$ and $W_{p}$\n\n* $C_{L}\\to 2C_{L}$\n* $I_{D,sat}\\propto W \\to 2I_{D}$ at the same $V_{GS}$\n\nso that\n\n$$t_{d}\\to t_{d}, \\qquad \nf_{0}\\approx \\frac1{2Nt_{d}}\\;\\;{\\rm unchanged}$$\n\nto first order. The swing is still rail to rail,\n$\\approx V_{DD}$.  The slew rate $I_{D}/C_{L}$ and hence\nthe waveform, and the impulse sensitivity function\n$\\Gamma$, are unchanged.  The power, $\\propto C_{L}V_{DD}^{2}f_{0}$,\ndoubles.\n\nFor white device noise Hajimiri's form, per stage,\n\n$${\\cal L}(\\Delta\\omega)\\;\\propto\\;\n{\\Gamma_{rms}^{2}\\over q_{max}^{2}}\\,\n{\\overline{i_{n}^{2}}/\\Delta f\\over 2\\Delta\\omega^{2}} $$\n\nwith\n\n$$q_{max}=C_{L}V_{max}\\approx C_{L}V_{DD}$$\n\nthe maximum charge swing on the node.  Doubling $W$,\n\n* $q_{max}\\to 2q_{max}$,\n* $\\overline{i_{n}^{2}}=4kT\\gamma g_{m}\\Delta f\\propto g_{m}\\propto W\n  \\;\\to\\;2\\,\\overline{i_{n}^{2}}$,\n\n$\\Gamma_{rms}$ being unchanged.  Hence at a given\n$\\Delta\\omega$\n\n$${\\cal L}' \\propto \n{2\\,\\overline{i_{n}^{2}}\\over (2q_{max})^{2}}\n=\\frac12\\,{\\overline{i_{n}^{2}}\\over q_{max}^{2}}\n=\\frac12{\\cal L}$$\n\ni.e. about $3\\,{\\rm dB}$ lower phase noise in\n${\\rm dBc/Hz}$, in both the $1/\\Delta f^{2}$ and, to first order,\nthe up-converted $1/f$ region. In $kT/C$ terms, the node noise\nvoltage $\\propto 1/C_{L}$ is halved at unchanged slew rate.\n\nThe improvement is bought with twice the area and twice\nthe power; $f_{0}$ and swing are essentially unchanged, so\nthe phase-noise/power FOM is unchanged.",
        "format": "markdown",
        "sha256": "e9ab4c98dd2abd2f008810ea58f02a616568e9dd8b98a186a13a51fa786a6c6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by about 3 dB, with the noise current power doubling while the charge swing doubles. This matches the golden solution’s full-credit rule.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3484,
        "output_tokens": 4756,
        "total_tokens": 8240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3484,
        "output_tokens": 4756,
        "total_tokens": 8240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3 stage single ended CMOS ring oscillator.\nFor one stage let $C_{L}$ be the total capacitance at its output,\ni.e. the gate capacitance of the next stage plus the drain\ncapacitances of the stage itself, and $I$ the current available\nto charge and discharge $C_{L}$.  Rail to rail swing is assumed.\n\nThe stage delay, the transition time and the oscillation\nfrequency are, to first order,\n\n$$\nt_{p}\\;\\propto\\; \\frac{C_{L}V_{DD}}{I}\\qquad \nf_{0}\\approx \\frac1{6t_{p}}\\;,\\qquad \n\\left.\\frac{dV}{dt}\\right|_{\\max }\\!\\propto \\frac{I}{C_{L}} .\n$$\n\nDoubling $W_{n}$ and $W_{p}$ at fixed $L$ and $V_{DD}$,\n\n* $C_{L}\\propto W$ doubles: gate and junction caps both $\\propto W$,\n* $I\\propto W$ and $g_{m}\\propto W$ at the same terminal voltages double.\n\nHence\n\n$$\nt_{p}\\propto \\frac{2C_{L}}{2I}= {\\rm const},\\qquad \nf_{0}\\approx {\\rm const},\\qquad \n\\frac{I}{C_{L}}\\approx {\\rm const}\n$$\n\ni.e. the voltage waveforms are unchanged in time, and\n\n$$\nP_{diss}\\approx C_{L}V_{DD}^{2}f_{0}\\;\\;{\\rm doubles}.\n$$\n\nFor a noise current $i_{n}$ injected at an output node Hajimiri's\nmodel gives a phase perturbation $\\propto \\Gamma(t)i_{n}/q_{\\max}$,\nwith\n\n$$\nq_{\\max}=C_{L}V_{DD},\\qquad \n{\\cal L}(\\Delta\\omega)\\propto \n\\Gamma_{rms}^{2}\\,\\frac{\\;\\overline{i_{n}^{2}}/\\Delta f\\;}{q_{\\max}^{2}}\\,\n\\frac1{\\Delta\\omega^{2}} .\n$$\n\n$\\Gamma(t)$, the waveform shape, is unchanged.  But\n\n$$\nq_{\\max}\\;\\; \\text{doubles}\\;\\;\\;\\; \\Longrightarrow\\;\\; q_{\\max}^{2}\\times 4,\n$$\n\nwhereas the device noise current increases:\n\n$$\n\\overline{i_{n,th}^{2}}=4kT\\gamma g_{m}\\propto W \\;\\; \\text{doubles},\n$$\n\nand similarly $\\;\\overline{i_{n,1/f}^{2}}\\propto g_{m}^{2}/WL\\propto W$\ndoubles.  Hence\n\n$$\n\\frac{\\overline{i_{n}^{2}}}{q_{\\max}^{2}}\\;\\longrightarrow\\;\n\\frac{2}{4}\\,\\frac{\\overline{i_{n}^{2}}}{q_{\\max}^{2}}\n      =\\frac12\\,\\frac{\\overline{i_{n}^{2}}}{q_{\\max}^{2}} .\n$$\n\nIn physical terms, the integrated output voltage noise\n$\\sim kT/C_{L}$ is halved, while the slew rate $I/C_{L}$ is\nunchanged, so the timing jitter variance is halved.\n\nThus at a given offset, in both the $1/\\Delta f^{2}$ and\n$1/\\Delta f^{3}$ regions,\n\n$$\n{\\cal L}'(\\Delta f)\\approx \\tfrac12\\,{\\cal L}(\\Delta f),\n$$\n\ni.e. about $3\\,{\\rm dB}$ lower phase noise, at essentially the\nsame $f_{0}$ and at twice the power dissipation.",
        "format": "markdown",
        "sha256": "469f52f1a3d5bb804cec33fff5661dbfae32bc818b82dee1f7e2d43248bcbf2e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes about a 3 dB phase-noise reduction and supports it with the appropriate scaling: node charge doubles, while device noise current power doubles, so noise relative to signal falls by a factor of two. The frequency remains approximately unchanged and power doubles, consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3484,
        "output_tokens": 5851,
        "total_tokens": 9335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3484,
        "output_tokens": 5851,
        "total_tokens": 9335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4955,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a 3-stage single ended inverter ring.\nLet the (total) capacitance on one node be $C$, dominated,\nas drawn, by the gate capacitance of the next stage and the\ndrain capacitances.  The swing is rail to rail.\n\nThe stage delay is, to first order,\n\n$$t_{p}\\sim \\frac{C V_{DD}}{I_{D}}  \\qquad \nf_{0}= \\frac{1}{2Nt_{p}}\\;\\;,\\;\\; N=3 $$\n\nDoubling every $W$, with $L$ and all voltages fixed,\n\n* $C\\propto W$ : $C\\to 2C$\n* the current that charges $C$ during a transition,\n  $I_{D}\\propto W$ : $I_{D}\\to 2I_{D}$, and $g_{m}\\propto W$\n\nHence\n\n$$t_{p}\\propto \\frac{C}{I_{D}}\\;\\; \\text{unchanged},\\qquad \nf_{0}\\;\\text{unchanged}$$\n\nthe rise and fall times and the waveform shape are unchanged,\nso the impulse sensitivity function $\\Gamma_{rms}$ is unchanged.\nThe voltage swing is still $V_{DD}$.\n\nThe maximum charge displacement on a node is\n\n$$q_{\\max}=C V_{DD}\\;\\;\\longrightarrow\\;2q_{\\max}$$\n\nThe white device noise current, e.g.\n\n$$\\overline{i_{n}^{2}}/\\Delta f = 4kT\\gamma g_{m}\\propto W\n\\;\\; \\longrightarrow\\; 2\\,\\overline{i_{n}^{2}}/\\Delta f $$\n\nand the same $W$ scaling holds for the flicker current noise.\nIn Hajimiri's form, at an offset $\\Delta\\omega$ in the\n$1/\\Delta\\omega^{2}$ region,\n\n$${\\cal L}(\\Delta\\omega)\\;\\propto\\;\n\\frac{\\Gamma_{rms}^{2}}{q_{\\max}^{2}}\\,\n\\frac{\\overline{i_{n}^{2}}/\\Delta f}{\\Delta\\omega^{2}}  $$\n\nso on doubling $W$\n\n$${\\cal L}\\;\\longrightarrow\\;\n\\frac{2}{2^{2}}\\,{\\cal L}= \\frac12{\\cal L}$$\n\ni.e. about $3\\,{\\rm dB}$ lower phase noise in ${\\rm dBc/Hz}$\nat the same offset and the same $f_{0}$.  In $kT/C$ terms,\n$\\overline{v_{n}^{2}}=kT/C$ is halved and the slew rate\n$I/C$ is unchanged.\n\nThe average power $P\\approx NCV_{DD}^{2}f_{0}$ is doubled:\nthe $3\\,{\\rm dB}$ is bought with power; the oscillator FOM is\nessentially unchanged.",
        "format": "markdown",
        "sha256": "acc9a4e413646e63b02aa2036d18fd5327815908e5ce919e8c6cc63f6dc42b69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by about 3 dB, with valid scaling: capacitance and signal charge double, while device noise power doubles, halving the noise-to-signal ratio.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3484,
        "output_tokens": 5950,
        "total_tokens": 9434,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5185,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3484,
        "output_tokens": 5950,
        "total_tokens": 9434,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5185,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "At the (unstable) d-c point of the ring all three\ninverters are biased at $V_{in}=V_{out}$ with both devices\nin saturation.  Let the $N$ and $P$ devices of an inverter\nhave $g_{mN},r_{oN}$ and $g_{mP},r_{oP}$, the three inverters\nbeing identical.  Apply a test voltage $V_{X}$ at the common\nsupply terminal and let the current drawn be $I_{X}$.\n\nThe excitation $V_{X}$ is common to the three stages.\nBy the cyclic symmetry of the ring the small-signal voltages\nat the three internal nodes must therefore be the same; call\nit $V$.  For any one stage the gate and the drain of the\n$N$ device are both at $V$, and the gate and the drain of\nthe $P$ device are both at $V$.  In the common-mode\nexcitation each transistor is diode connected.\n\nHence the current in one stage, from $V_{X}$ to ground, is,\nthrough the $P$ device,\n\n$$I_{1}=g_{mP}(V_{X}-V)+\\frac{V_{X}-V}{r_{oP}}\n      =\\big(g_{mP}+g_{oP}\\big)(V_{X}-V),$$\n\nand through the $N$ device,\n\n$$I_{1}=g_{mN}V+\\frac{V}{r_{oN}}\n      =\\big(g_{mN}+g_{oN}\\big)V,$$\n\nwith $g_{o}=1/r_{o}$.  Thus one inverter presents, between\nsupply and ground, the series resistance\n\n$$R_{\\text{stage}}=\\frac{1}{g_{mP}+g_{oP}}+\\frac{1}{g_{mN}+g_{oN}}\n   =\\left(\\frac1{g_{mP}}\\Big\\Vert r_{oP}\\right)\n   +\\left(\\frac1{g_{mN}}\\Big\\Vert r_{oN}\\right),$$\n\nand\n\n$$V = V_{X}\\,\n\\frac{g_{mP}+g_{oP}}{g_{mN}+g_{oN}+g_{mP}+g_{oP}},\\qquad\nI_{1}= \\frac{(g_{mN}+g_{oN})(g_{mP}+g_{oP})}\n            {g_{mN}+g_{oN}+g_{mP}+g_{oP}}\\,V_{X}.$$\n\nThe three stages are in parallel for $I_{X}=3I_{1}$, so\n\n$$R_{X}=\\frac{V_{X}}{I_{X}}\n      =\\frac13\\left[\n        \\frac{1}{g_{mN}+g_{oN}}+\n        \\frac{1}{g_{mP}+g_{oP}}\n        \\right]\n      =\\frac13\\Big[\n        \\big(\\tfrac1{g_{mN}}\\!\\parallel r_{oN}\\big)+\n        \\big(\\tfrac1{g_{mP}}\\!\\parallel r_{oP}\\big)\n        \\Big]\n      \\approx \\frac{1}{3}\\left(\\frac1{g_{mN}}+\\frac1{g_{mP}}\\right),$$\n\nthe last form for $g_{m}r_{o}\\gg1$.  For matched devices this is $\\approx 2/3g_{m}$.",
        "format": "markdown",
        "sha256": "97a922ac5559bbef989541c04977f23274b5b44e975118bef3d3e81a2dd8b475"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static gm-based derivation is internally consistent, but it ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply-node resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3314,
        "output_tokens": 7223,
        "total_tokens": 10537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3314,
        "output_tokens": 7223,
        "total_tokens": 10537,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the (incremental) voltages at the three internal nodes\nbe $v_{1},v_{2},v_{3}$, the inverters being identical.  Bias the\nring at the (unstable) point at which\n\n$$v_{in}=v_{out}=V_{M}\\qquad\\text{for every stage,}$$\n\nso that every NMOS and every PMOS is in saturation, with\n$g_{mn},r_{on}$ and $g_{mp},r_{op}$.\n\nApply a test voltage $v_{x}$ to the common supply rail and let\n$i_{x}$ be the current it delivers. The excitation is common\nto the three stages, and the circuit is invariant under a cyclic\npermutation of the stages. Hence, for the linearised circuit,\n\n$$v_{1}=v_{2}=v_{3}\\equiv v .$$\n\nThus, for every stage, the gate and the drain of the NMOS are\nat the same small-signal voltage $v$, and the gate and the drain\nof the PMOS are also at $v$.  Each transistor is therefore\nsmall-signal diode connected.\n\nFor the PMOS, looking from its source,\n\n$$r_{p}= \\frac{1}{g_{mp}+g_{op}}\n      =\\frac1{g_{mp}}\\;\\Big\\|\\;r_{op},$$\n\nand for the NMOS, looking from its drain,\n\n$$r_{n}= \\frac{1}{g_{mn}+g_{on}}\n      =\\frac1{g_{mn}}\\;\\Big\\|\\;r_{on}.$$\n\nIn one stage the PMOS and NMOS diode resistances are in series\nbetween the supply rail and ground, carrying the same current.\nThe resistance of one stage across the supply is therefore\n$r_{p}+r_{n}$.  The three stages are in parallel across the\ntest source, so\n\n$$\nR_{X}= \\frac{r_{p}+r_{n}}{3}\n     =\\frac13\\left[\n        \\frac{1}{g_{mp}+1/r_{op}}+\n        \\frac{1}{g_{mn}+1/r_{on}}\n        \\right]\n     =\\frac13\\left[\n        \\left(\\frac1{g_{mp}}\\Big\\|r_{op}\\right)+\n        \\left(\\frac1{g_{mn}}\\Big\\|r_{on}\\right)\n        \\right].\n$$\n\nFor $g_{m}r_{o}\\gg1$,\n\n$$\nR_{X}\\;\\approx\\;\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right),\n$$\n\ne.g. for $g_{mn}=g_{mp}=g_{m}$, $R_{X}\\approx 2/3g_{m}$.",
        "format": "markdown",
        "sha256": "972db7e62d76aeebeffa1be5410a3f87a46c740b26880e596bf99119fbd63100"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static gm-based derivation ignores the oscillation-driven charging and discharging of the load capacitances, which sets the supply resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3314,
        "output_tokens": 7571,
        "total_tokens": 10885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6816,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3314,
        "output_tokens": 7571,
        "total_tokens": 10885,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6816,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Let the (small signal) outputs of the three inverters be\n$V_{1},V_{2},V_{3}$, and apply a test voltage $V_{X}$ at the\ncommon supply node, drawing $I_{X}$.\n\nFor the metastable bias point used in the small signal analysis\nof the ring, $V_{in}=V_{out}$ for every stage and all of the\nstages are identical, with $(g_{mN},r_{oN})$ for the NMOS and\n$(g_{mP},r_{oP})$ for the PMOS device.  KCL at the three output\nnodes gives, with $g_o\\equiv 1/r_o$,\n\n$$\\begin{aligned}\n(g_{mP}+g_{oP})V_X&=(g_{mP}+g_{mN})V_3+(g_{oP}+g_{oN})V_1\\\\\n(g_{mP}+g_{oP})V_X&=(g_{mP}+g_{mN})V_1+(g_{oP}+g_{oN})V_2\\\\\n(g_{mP}+g_{oP})V_X&=(g_{mP}+g_{mN})V_2+(g_{oP}+g_{oN})V_3 .\n\\end{aligned}$$\n\nThe circuit is cyclically symmetric, so the unique solution is\n\n$$V_{1}=V_{2}=V_{3}\\equiv V_{o} .$$\n\nHence the input of every inverter is tied, in the small signal\nsense, to its own output: each inverter is two diode-connected\ndevices in series between $V_X$ and ground. The current in one\ninverter is therefore\n\n$$ I = (g_{mN}+g_{oN})V_{o}\n     = (g_{mP}+g_{oP})(V_{X}-V_{o}) ,$$\n\ni.e.\n\n$$ I=\\frac{V_{X}}\n{\\dfrac{1}{g_{mN}+g_{oN}}+\\dfrac{1}{g_{mP}+g_{oP}}} .$$\n\nThere are three such branches in parallel, $I_{X}=3I$.  Thus\n\n$$\\;R_{X}=\\frac{V_{X}}{I_{X}}\n      =\\frac13\\left[\n        \\frac{1}{g_{mN}+g_{oN}}+\\frac{1}{g_{mP}+g_{oP}}\n        \\right]\\;$$\n\ni.e.\n\n$$ R_{X}= \\frac{1}{3}\\Big[\\,\\big(\\tfrac1{g_{mN}}\\parallel r_{oN}\\big)\n      +\\big(\\tfrac1{g_{mP}}\\parallel r_{oP}\\big)\\Big]\n      \\;\\approx\\; \\frac{1}{3}\\left(\\frac1{g_{mN}}+\\frac1{g_{mP}}\\right),\n\\qquad g_mr_o\\gg1, $$\n\nthe resistance of one diode-connected NMOS in series with one\ndiode-connected PMOS, with three such branches in parallel.",
        "format": "markdown",
        "sha256": "1e209436f4103fdc3d1e96e738c4913678c2941d592ba2704623024f697e6288"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation consistently analyzes a static metastable operating point and obtains a gm-based diode-connected resistance, but misses the dominant resistance from oscillation-driven charging and discharging of the load capacitances.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3314,
        "output_tokens": 6212,
        "total_tokens": 9526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3314,
        "output_tokens": 6212,
        "total_tokens": 9526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, for the circuit in its steady oscillating state. The quoted\nvalue is only the linearization about the unstable dc point.\n\nAt that (metastable) point,\n$$V_1=V_2=V_3\\approx V_{DD}/2 ,$$\nall devices are saturated, and a common supply perturbation makes\nthe three internal nodes move in unison, $v_1=v_2=v_3$.  Hence, incrementally,\n$v_g=v_d$ for every transistor: each branch looks like a PMOS diode\nin series with an NMOS diode,\n$$r_{\\rm branch}\\approx \\frac1{g_{mp}}+\\frac1{g_{mn}},\\qquad \nR_X\\approx \\frac13\\Bigl(\\frac1{g_{mp}}+\\frac1{g_{mn}}\\Bigr)$$\nwith $r_o$'s neglected. But this point is unstable: the ring has\nright-half-plane poles and noise there grows into a limit cycle.\n\nIn steady oscillation the node waveforms are large, rail-to-rail,\ndelayed/inverted copies of one another ( $120^{\\circ}$ apart at the\nfundamental), not equal voltages.  Thus for a given inverter\n$v_g\\ne v_d$; it is not two diode-connected devices. Its transistors\ncycle through off, saturation and triode, so $g_{mn},g_{mp}$ are\nperiodic functions of time, often zero.  Most of the time one device\nin each supply-to-ground branch is off, so there is no static diode\npath from $V_{DD}$ to ground; supply current flows mainly in pulses\nthat charge the node capacitances, plus short-circuit current during\ntransitions.\n\nHence $R_X$ of the oscillating circuit is not the constant\n$\\tfrac13(1/g_{mn}+1/g_{mp})$.  Instantaneously it is time-varying,\nand a slowly measured value is governed by the average dynamic\ncurrent, e.g. $\\bar I_{DD}\\approx 3 f_{\\rm osc}C_LV_{DD}$, i.e. by\n$f_{\\rm osc}(V_{DD})$, not by the transconductances at the metastable point.",
        "format": "markdown",
        "sha256": "dfc449263e7669e2c06316fd65f34a3ed96f10749dbab63ea047632f06316708"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the capacitive charging mechanism and gives the equivalent average-current expression, but does not establish that the resulting resistance remains on the order of the MOS on-resistance or inverse transconductance. Its emphasis on devices being off could also suggest a misleadingly higher resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3392,
        "output_tokens": 15914,
        "total_tokens": 19306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3392,
        "output_tokens": 15914,
        "total_tokens": 19306,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, in the ideal matched small--signal sense. The mistake is to\nthink of the diode connection as applying to the oscillation\nsignal itself. It applies to the signal produced at the internal\nnodes by a supply perturbation.\n\nApply a test increment $v_x$ at the common supply and let\n$v_1,v_2,v_3$ be the increments it produces at the three inverter\noutputs. The test source drives the three stages identically, so\nit excites only the common mode of the ring. By the cyclic\nsymmetry of the three identical stages the response to $v_x$ must\nsatisfy\n\n$$\nv_1=v_2=v_3\\equiv v .\n$$\n\nHence, for this supply-produced increment, the gate of every\ntransistor does move by exactly the same amount as its drain:\nthe NMOS and PMOS of a stage do act, for the common mode, as two\ndiode-connected devices in series between $v_x$ and ground.\nKCL at one output node, with no gate current, gives, including\n$r_o$,\n\n$$\n\\big(g_{mp}+g_{dp}\\big)(v_x-v)=\\big(g_{mn}+g_{dn}\\big)v ,\n$$\n\nso the current drawn by one stage from the supply is\n\n$$\ni_{\\text{stage}}=\\big(g_{mp}+g_{dp}\\big)(v_x-v)\n      =\\frac{v_x}{\\dfrac1{g_{mn}+g_{dn}}+\\dfrac1{g_{mp}+g_{dp}}}.\n$$\n\nThree stages in parallel therefore give\n\n$$\nR_X=\\frac13\\left[\n\\frac1{g_{mn}+g_{dn}}+\\frac1{g_{mp}+g_{dp}}\n\\right]\n\\;\\approx\\;\n\\frac13\\left(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\right),\n$$\n\nas quoted.\n\nThe oscillation itself is the other, differential, mode of the\nring: successively $120^{\\circ}$ apart,\n\n$$\no_1+o_2+o_3=0\\qquad \n\\big(o_i\\ \\text{the oscillatory part of }v_i\\big).\n$$\n\nIts first-order contribution to the total supply current is\nproportional to $\\sum_i o_i$ (each $o_i$ enters once as a drain\nvoltage and once as the next stage's gate voltage), hence it\ncancels; and a purely common supply excitation has no component\nalong this sum-zero mode. The common-mode (supply) and\ndifferential-mode (oscillation) motions are orthogonal, so the\noscillatory mode neither is excited by $v_x$ nor contributes to\n$i_x$ to first order. That pole of the differential mode is\ncancelled at the supply port.\n\nSo $R_X$ is unchanged by the presence of the (linearised)\noscillation; the diode-connected picture is correct only for the\ncommon-mode increment produced by the supply test signal, not for\nthe $120^{\\circ}$ oscillation signal itself.",
        "format": "markdown",
        "sha256": "2eb24c44bdb72a024f893f407c2c2a197d1a59b541c691d326f82fa665dddc3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It reaches the broad conclusion that oscillation does not make RX much larger, but it asserts the static diode-connected model still applies. It misses the required dynamic charging mechanism and the argument that RX remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3302,
        "input_tokens": 3392,
        "output_tokens": 15264,
        "total_tokens": 18656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3302,
        "input_tokens": 3392,
        "output_tokens": 15264,
        "total_tokens": 18656,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes -- in the sense that the quoted number is not the\nimpedance of the oscillating circuit.  It is the impedance\nlinearised about a point at which the circuit does not stay.\n\nLet the internal nodes be $A,B,C$.  The (unstable) d-c solution is\n\n$$\nA=B=C=V_M\\approx V_{DD}/2 ,\n$$\n\nwith every device saturated with the $g_{mn},g_{mp}$ used above.\nFor a symmetric supply perturbation the symmetry gives\n$\\delta A=\\delta B=\\delta C$, so for every stage incrementally\n$\\delta v_{in}=\\delta v_{out}$: the stage momentarily looks like a\nPMOS diode in series with an NMOS diode between $V_{DD}$ and ground.\nThree such stages in parallel give\n\n$$\nR_X \\approx \\frac13\\Bigl(\\frac1{g_{mn}}+\\frac1{g_{mp}}\\Bigr).\n$$\n\nThat operating point has loop gain $>1$ and is unstable.  In\noscillation $A,B,C$ are large, roughly rail-to-rail waveforms shifted\nby $T_{osc}/3$; in particular $v_{in}\\ne v_{out}$ for a stage except at\nthe brief crossing instants.  There is no fixed $Q$ point about which\nto linearise:\n\n* $g_{mn}$ and $g_{mp}$ are not constants; over a period each device\ngoes through cut-off, triode and saturation.\n* In a non-switching inverter one device is essentially off, so there\nis no diode-connected d-c path from $V_{DD}$ to ground.\n* The supply current is not a static crowbar current; it consists\nmainly of pulses charging the node capacitances.  Only the stage\nactually switching draws appreciable through-current, and only\nbriefly.\n\nHence there is no time-invariant small-signal $R_X$ of the quoted\nform; the incremental supply conductance is periodic in time,\ndepending on the phase of the oscillation at which the perturbation\nis applied, with mixing to $f_{test}\\pm nf_{osc}$.\n\nA slow, period-averaged measurement gives instead\n\n$$\n\\bar I_{DD}\\approx 3C_L V_{DD} f_{osc}(V_{DD}),\\qquad\nR_{X,\\text{avg}}=\\left(\\frac{d\\bar I_{DD}}{dV_{DD}}\\right)^{-1}\n =\\frac{1}{3C_L\\!\\left[f_{osc}+V_{DD}\\,df_{osc}/dV_{DD}\\right]},\n$$\n\nwhich is in general quite different from\n$\\tfrac13\\bigl(1/g_{mn}+1/g_{mp}\\bigr)$ evaluated at the metastable\npoint.",
        "format": "markdown",
        "sha256": "6e6610604465eb9582604ccdbbf2f8a881654d1a1fca816d57670a42b4b6e5e0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging as the source of oscillating supply current and gives an averaged-current expression. But it does not show that the resulting resistance remains on the order of the MOS on-resistance or inverse transconductance, and its claim that it is generally quite different from the static estimate misses the key conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3392,
        "output_tokens": 12028,
        "total_tokens": 15420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3392,
        "output_tokens": 12028,
        "total_tokens": 15420,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is the StrongARM latch. In reset, $CK=0$, $S_{1}-S_{4}$\nprecharge $P,Q,X,Y$ to $V_{DD}$ and $M_{7}$ is off.  When $CK$\ngoes high $S_{1}-S_{4}$ turn off and $X$ and $Y$ are discharged\nthrough $M_{3,4}$ and the input pair $M_{1,2}$.\n\nBefore the cross-coupled $M_{5,6}$ turn on, the latch is\nessentially an integrator. With $C_X=C_Y=C$ and\n$I_{D1}\\approx I_{D2}\\approx I_{7}/2$,\n\n$$\nV_X \\approx V_{DD}-\\frac{I_{D1}}{C}t ,\\qquad \nV_Y \\approx V_{DD}-\\frac{I_{D2}}{C}t .\n$$\n\nRegeneration starts at $t=t_0$, when $V_X,V_Y$ have fallen by\nabout $|V_{TH,P}|$, so that $M_{5,6}$ turn on:\n\n$$\nt_0 \\approx \\frac{C|V_{TH,P}|}{I_{D1,2}} .\n$$\n\nThe differential voltage already developed at that moment is\n\n$$\n\\Delta V_{XY}(t_0)=\\frac{I_{D1}-I_{D2}}{C}t_0\n      \\approx \\frac{g_{m1,2}V_{id}}{C}t_0 ,\n$$\n\nso the ``initial'' gain, i.e. the gain just before regeneration,\nis\n\n$$\nA_{v,i}\\equiv \\frac{\\Delta V_{XY}(t_0)}{V_{id}}\n      \\approx \\frac{g_{m1,2}}{I_{D1,2}}|V_{TH,P}|\n      =\\frac{2|V_{TH,P}|}{V_{OV1,2}} .\n$$\n\n$M_7$ is not biased with a fixed current; its gate is the\ndigital clock. Increasing $W_7$ lowers its on resistance,\npulls the common source node of $M_{1,2}$ down, and therefore\nincreases $I_7$ and $I_{D1,2}$, i.e. increases $V_{OV1,2}$.\nAlthough $g_{m1,2}$ grows, it grows only as $\\sqrt{I_{D1,2}}$,\nwhereas $t_0$ shrinks as $1/I_{D1,2}$. Hence\n\n$$\nA_{v,i}\\propto \\frac{g_{m1,2}}{I_{D1,2}}\\propto \\frac{1}{\\sqrt{I_{D1,2}}}\n$$\n\ndecreases. The latch regenerates faster, but with a smaller\ninitial differential voltage, so the input-referred contribution\nof $M_{3}$-$M_{6}$ becomes larger.",
        "format": "markdown",
        "sha256": "b0b94b59817602a2a5aec7b817281c9edc916d6c665d22a42769c6c8525bfc17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that initial gain decreases: a wider M7 raises tail current, while input-pair gm grows sublinearly, so gm/ICM falls. The integration-time explanation is consistent with the golden solution.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4062,
        "output_tokens": 9674,
        "total_tokens": 13736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4062,
        "output_tokens": 9674,
        "total_tokens": 13736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8856,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "At the rising edge of $CK$, $S_{1}-S_{4}$ turn off and $M_{7}$\nturns on. The nodes $X$ and $Y$, precharged to $V_{DD}$, begin\nto discharge through $M_{3,4}$, $M_{1,2}$ and $M_{7}$.\n\nUntil $V_X,V_Y$ have fallen by about $|V_{thp}|$, $M_{5,6}$ are\nstill off and there is no regeneration. In this interval a\ndifferential output is built up only by integration of the\ninput-pair current difference on $C_X=C_Y=C$:\n\n\\[\n\\Delta V_{XY}\\approx \\frac{g_{m1,2}\\,\\Delta V_{in}}{C}\\,t_0\n\\]\n\nwhere $t_0$ is the time for $X,Y$ to fall by $|V_{thp}|$,\n\n\\[\nt_0 \\approx \\frac{C|V_{thp}|}{I_{D1,2}} .\n\\]\n\nHence the voltage gain present at the start of regeneration is\n\n\\[\nA_{v0}\\equiv \\frac{\\Delta V_{XY}}{\\Delta V_{in}}\n      \\approx g_{m1,2}\\frac{|V_{thp}|}{I_{D1,2}}\n      =\\frac{g_{m1,2}}{I_{D1,2}}|V_{thp}|\n      \\approx \\frac{2|V_{thp}|}{V_{ov1,2}} .\n\\]\n\nIncreasing $W_7$ lowers the on-resistance of the tail switch\nand increases $I_{D1,2}$ -- the common-source node of $M_{1,2}$\nis pulled lower and $V_{ov1,2}$ rises. Although $g_{m1,2}$\nincreases, it increases only sub-linearly with current,\n$\\propto\\!\\sqrt{I_{D1,2}}$, while the integration time $t_0$\nfalls as $1/I_{D1,2}$.\n\nThus\n\n\\[\nA_{v0}\\propto \\frac{g_{m1,2}}{I_{D1,2}}\n\\]\n\ndecreases with increasing $W_7$, roughly as $W_7^{-1/2}$ while\n$M_7$ limits the current, levelling off when $I_{D1,2}$ becomes\nlimited by $M_{1,2}$ themselves.",
        "format": "markdown",
        "sha256": "4f6877b239a62658b91084f1b64c9849bd80670f2fc8b494ae0a06840ead9971"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain decreases as M7 widens, and explains that increased tail current raises gm sublinearly while shortening the integration time, reducing the relevant gm/current gain factor. The exact threshold approximation is not essential.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4062,
        "output_tokens": 7154,
        "total_tokens": 11216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6445,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4062,
        "output_tokens": 7154,
        "total_tokens": 11216,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6445,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "At the beginning of the evaluate phase $CK$ is high,\n$S_{1}-S_{4}$ are off, and $X$ and $Y$ have been precharged to\n$V_{DD}$. The cross-coupled PMOS devices $M_{5},M_{6}$ are still off.\n$X$ and $Y$ are discharged by the currents of $M_{1}$ and $M_{2}$,\nthrough $M_{3}$ and $M_{4}$, until $V_X$ or $V_Y$ has fallen by\n$|V_{th,p}|$ and regeneration by $M_{3}-M_{6}$ begins.\n\nLet $I_D$ be the quiescent current in each input branch and\n$\\Delta I_D$ its input-induced difference. During this initial,\npre-regenerative interval\n\n$$\n\\Delta I_D \\approx g_{m1,2}\\,\\Delta V_{in},\n\\qquad \nt_{r}\\approx \\frac{C_{X,Y}|V_{th,p}|}{I_D},\n$$\n\nwhere $t_r$ is the time for $X,Y$ to fall by $|V_{th,p}|$.\nHence the differential voltage developed at $X,Y$ when\nregeneration starts is\n\n$$\n\\Delta V_{XY}(t_r)\\approx \\frac{\\Delta I_D}{C_{X,Y}}t_r\n      =\\frac{g_{m1,2}}{I_D}|V_{th,p}|\\,\\Delta V_{in},\n$$\n\nso that the initial voltage gain is\n\n$$\nA_{v,i}\\equiv \\frac{\\Delta V_{XY}(t_r)}{\\Delta V_{in}}\n      \\approx \\frac{g_{m1,2}}{I_D}|V_{th,p}|\n      =\\frac{2|V_{th,p}|}{V_{ov1,2}} ,\n$$\n\napart from a similar term due to the unequal turn-on times\nof $M_3$ and $M_4$, also proportional to $g_{m1,2}/I_D$.\n\nIncreasing $W_7$ lowers the impedance from the common-source\nnode of $M_1,M_2$ to ground. That node is pulled lower,\n$V_{ov1,2}$ and $I_D$ increase, and $X,Y$ discharge faster, i.e.\n$t_r$ decreases. Although $g_{m1,2}$ increases, $g_{m1,2}/I_D\n=2/V_{ov1,2}$ decreases.\n\nTherefore the initial, pre-regenerative voltage gain decreases\n— the latch decides faster, but with less initial amplification.",
        "format": "markdown",
        "sha256": "ba7a5a3bf5b0f7ddb2489dec8f0f8e03c58cf84173e682d2a60e2dabbd2fd61d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts that the initial gain decreases as M7 widens, and explains that increased tail/branch current makes gm/ID decrease. The integration-time derivation is consistent with the essential mechanism; formula details do not change the conclusion.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4062,
        "output_tokens": 12113,
        "total_tokens": 16175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4062,
        "output_tokens": 12113,
        "total_tokens": 16175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11378,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "During reset $CK=0$, $S_{1}-S_{4}$ are on and\n\n$$V_X=V_Y=V_P=V_Q=V_{DD}\\qquad M_3,M_4,M_5,M_6\\;{\\rm off} .$$\n\nWhen $CK$ goes high $M_{1},M_{2}$ first discharge $P$ and $Q$.\nFor $V_{in1}>V_{in2}$, $I_{D1}>I_{D2}$ and $P$ falls faster than\n$Q$.  $M_{3}$ and $M_{4}$ do not conduct until their sources have\nfallen about a threshold below their gates, e.g.\n\n$$t_{3}\\approx \\frac{C_{P}V_{THN}}{I_{D1}},\\qquad \n       t_{4}\\approx \\frac{C_{P}V_{THN}}{I_{D2}}\\; .$$\n\nHence the two sides of the NMOS latch turn on at different times,\n\n$$\\Delta t=t_{4}-t_{3}\\approx \nC_{P}V_{THN}\\!\\left(\\frac1{I_{D2}}-\\frac1{I_{D1}}\\right)\n\\approx C_{P}V_{THN}\\frac{\\,I_{D1}-I_{D2}\\,}{I_{D}^{2}}\n\\approx C_{P}V_{THN}\\frac{g_{m1,2}V_{id}}{I_{D}^{2}}\\propto C_{P} .$$\n\nDuring $\\Delta t$ essentially only the early side, say $M_{3}$,\ndischarges the output capacitance $C_{X}$, while $V_{Y}$ stays near\n$V_{DD}$.  The differential voltage seeded at $X\\!-\\!Y$ before\n$M_{5},M_{6}$ start regeneration is therefore\n\n$$\\Delta V_{XY,0}\\approx \\frac{I_{D}\\Delta t}{C_{X}}\n      \\approx \\frac{C_{P}}{C_{X}}\\,V_{THN}\\,\\frac{\\Delta I_{D}}{I_{D}},$$\n\ni.e.\n\n$$A_{0}\\equiv\\frac{\\Delta V_{XY,0}}{V_{id}}\n      \\approx \\frac{C_{P}}{C_{X}}\\frac{g_{m1,2}V_{THN}}{I_{D}}\\;,$$\n\nincreases, roughly in proportion to $C_{P}=C_{Q}$.  The price is\na longer discharge time $t_{3,4}\\propto C_{P}$, i.e. a slower\ncomparator.",
        "format": "markdown",
        "sha256": "038ed1a66f78a540b5d464baa830e0a4bdd9a548e04fa7c85e80881cfe489637"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that the initial gain increases with capacitance, and bases this on a timing-skew mechanism rather than the gain accumulated across P and Q. It correctly notes that larger capacitance slows discharge, but misses that the longer amplification time cancels the reduced differential-voltage slope, leaving the initial gain essentially unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 25381,
        "total_tokens": 29442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 25381,
        "total_tokens": 29442,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24630,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "This is a StrongARM dynamic latch. During reset $CK=0$,\n$S_{1}$-$S_{4}$ precharge $X,Y,P,Q$ to $V_{DD}$, so $M_{3}$-$M_{6}$ are off.\nWhen $CK$ goes high, the tail device $M_{7}$ turns on and the\nprecharge devices turn off.\n\n### Initial phase\n\nAt first $M_{3}$ and $M_{4}$ remain off, so $X$ and $Y$ stay at\n$V_{DD}$ while $I_{D1}$ and $I_{D2}$ discharge the capacitances\nat $P$ and $Q$, $C_{P}=C_{Q}$.\n\n$M_{3},M_{4}$ begin to conduct when $V_{P,Q}$ has fallen by about\na threshold voltage below $V_{DD}$:\n\n$$\nV_{DD}-V_{P}(t_{1}) \\approx V_{THN}\n\\qquad\\Longrightarrow\\qquad\nt_{1}\\approx \\frac{C_{P}V_{THN}}{I_{D1,2}} .\n$$\n\nThe differential voltage developed at $P,Q$ up to that moment is\n\n$$\n\\Delta V_{PQ}(t_{1})\n   =\\frac{I_{D1}-I_{D2}}{C_{P}}\\,t_{1}\n   =\\frac{g_{m1,2}\\,\\Delta V_{in}}{C_{P}}\\,t_{1}.\n$$\n\nSubstituting $t_{1}$,\n\n$$\n\\;\\Delta V_{PQ}(t_{1})\n      \\approx \\frac{g_{m1,2}}{I_{D1,2}}\\,V_{THN}\\;\\Delta V_{in}\\;\n$$\n\nso the initial (pre-regeneration) voltage gain is\n\n$$\nA_{\\text{init}}=\\frac{\\Delta V_{PQ}}{\\Delta V_{in}}\n\\approx \\frac{g_{m1,2}V_{THN}}{I_{D1,2}}\n\\approx \\frac{2V_{THN}}{V_{OV1}},\n$$\n\nwhich, to first order, does **not** contain $C_{P}$.\n\n### Intuition\n\nIncreasing $C_{P,Q}$ makes $P$ and $Q$ discharge more slowly,\n$\\,dV_{P}/dt = I_{D}/C_{P}$, so the differential voltage at any\ngiven instant is smaller. But it takes proportionally longer\nfor $V_{P,Q}$ to fall by $V_{THN}$ and turn on $M_{3},M_{4}$.\nThe longer integration time exactly compensates for the\nsmaller $dV/dt$, leaving the seed voltage handed to the\nregenerative $X$–$Y$ latch unchanged.\n\nThe penalty is speed: the initial delay $t_{1}\\propto C_{P,Q}$\nincreases (the benefit is reduced kickback to the input, since\nthe same charge disturbance now produces a smaller $\\Delta V = \\Delta Q/C_{P,Q}$).",
        "format": "markdown",
        "sha256": "c1e06751a8f81bfba5b6571b0d3cdd4773448401673d59822796f65d76c3b15e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is essentially unchanged: the larger capacitance slows discharge but proportionally lengthens the amplification interval, so capacitance cancels. It also correctly notes the speed penalty.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 16823,
        "total_tokens": 20884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15985,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 16823,
        "total_tokens": 20884,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15985,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "When $CK$ rises $S_{1}$-$S_{4}$ turn off and $M_{7}$ turns on.\n$X,Y$ and $P,Q$ have been precharged to $V_{DD}$, so that\n\n$$V_{GS3}=V_{GS4}=V_{DD}-V_{DD}=0$$\n\ni.e. $M_{3}$ and $M_{4}$ are initially off.  $M_{1}$ and $M_{2}$\nfirst discharge $C_{P}$ and $C_{Q}$ with, to first order, the\nconstant currents $I_{1}$ and $I_{2}$:\n\n$$V_{P}\\approx V_{DD}-\\frac{I_{1}t}{C_{P}},\\qquad \n  V_{Q}\\approx V_{DD}-\\frac{I_{2}t}{C_{Q}}\\qquad C_{P}=C_{Q} .$$\n\n$M_{3},M_{4}$ begin to conduct when $V_{DD}-V_{P,Q}=V_{THN}$,\ni.e. after\n\n$$t_{0}\\approx \\frac{C_{P}V_{THN}}{I_{D}},\\qquad \nI_{D}\\approx \\frac{I_{1}+I_{2}}{2} .$$\n\nThe differential voltage developed at $P-Q$ by then is\n\n$$\\begin{aligned}\n|V_{Q}-V_{P}| &=\\frac{|I_{1}-I_{2}|\\,t_{0}}{C_{P}}  \\\\\n&=\\frac{|I_{1}-I_{2}|}{I_{D}}\\,V_{THN}\n   =\\frac{g_{m1,2}}{I_{D}}V_{THN}\\,|V_{in1}-V_{in2}| .\n\\end{aligned}$$\n\nHence the voltage gain handed to the $M_{3}$-$M_{6}$ latch at\nthe start of regeneration is, to first order,\n\n$$A_{v,\\text{init}}\\equiv\\frac{|V_{Q}-V_{P}|}{|V_{in1}-V_{in2}|}\n      \\approx \\frac{g_{m1,2}}{I_{D}}V_{THN}\\approx\\frac{2V_{THN}}{V_{ov1,2}},$$\n\nin which $C_{P}$ has cancelled.  Increasing $C_{P,Q}$ does not,\nto first order, change the initial gain; it only increases\n$t_{0}\\propto C_{P,Q}$, i.e. it delays the turn-on of $M_{3},M_{4}$\nand slows the comparator down.",
        "format": "markdown",
        "sha256": "0fc91b4002e2ce2e17fde7b05610cb5e3ac6592892e767ec01b22c3b6858f549"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the initial gain is essentially unchanged, shows the capacitance cancels as the longer amplification interval offsets the slower voltage slope, and notes that larger capacitance mainly delays the transient.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 17771,
        "total_tokens": 21832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 17771,
        "total_tokens": 21832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17026,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The $M_{3}$-$M_{6}$ cross-coupled pair is the regenerative latch\nat nodes $X$ and $Y$. $S_{3},S_{4}$ precharge $X$ and $Y$ to $V_{DD}$\nwhen $CK$ is low.\n\nWhen $CK$ goes high, the decision is made in two phases:\n\n1. **Initial discharge:** $X$ and $Y$ are discharged through\n$M_{3},M_{4}$-$M_{1},M_{2}$-$M_{7}$. Since initially\n$V_{X}=V_{Y}=V_{DD}$, $M_{5}$ and $M_{6}$ have $V_{SG}\\approx 0$ and are\n**off**. They turn on only after $X$ (or $Y$) has fallen by about\n$|V_{THP}|$. The time for this is roughly\n$$\nt_{0}\\;\\approx\\;\\frac{C_{X,Y}\\,|V_{THP}|}{I_{tail}/2}\n$$\nDuring this entire phase $M_{5},M_{6}$ contribute nothing except\ncapacitance at $X$ and $Y$: their drain junction capacitance and\nthe gate capacitance of the opposite device. Increasing $W_{5,6}$\nincreases $C_{X,Y}$ and hence increases $t_{0}$.\n\n2. **Regeneration:** Once $M_{5},M_{6}$ turn on, the latch\nregenerates with a time constant\n$$\n\\tau_{reg}\\;\\approx\\;\\frac{C_{X,Y}}{g_{m3,4}+g_{m5,6}}\n$$\nIncreasing $W_{5,6}$ increases $g_{m5,6}$, but it increases\n$C_{X,Y}$ due to $M_{5,6}$ in almost the same proportion — $g_{m}/C$\nof the device itself is essentially its intrinsic speed. So\n$\\tau_{reg}$ improves negligibly, if at all.\n\nHence the added $g_m$ in regeneration does not compensate for\nthe extra load during the initial discharge phase, during which\n$M_{5},M_{6}$ are inactive. The total decision time increases:\n\n**Increasing $W_{5}$ and $W_{6}$ degrades the speed** (which is why the PMOS latch devices are typically kept small).",
        "format": "markdown",
        "sha256": "4b04380716878451a1b138f42e560280e474c1b9355033e2fae89579c509ecc2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M5/M6 as regenerative devices and notes that widening raises both transconductance and capacitance, but it incorrectly concludes that the added capacitance dominates from the start. The golden solution says regeneration wins initially, so speed improves up to an optimum.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 5064,
        "total_tokens": 9125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 5064,
        "total_tokens": 9125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4418,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The decision time is degraded.\n\nWith $CK$ low, $X$ and $Y$ are precharged to $V_{DD}$, so $M_{5}$\nand $M_{6}$ are off.  When $CK$ goes high, $X$ and $Y$ are first\ndischarged through $M_{3}$-$M_{1}$ and $M_{4}$-$M_{2}$.  Only after\none node has fallen by about $|V_{THP}|$ does the pMOS latch begin\nto act.\n\nThe delay is approximately\n\n$$\nt_{d}\\;\\approx\\;\n\\underbrace{\\frac{C_{XY}|V_{THP}|}{I_{D1,2}}}_{\\text{initial discharge}}\n\\;+\\;\n\\underbrace{\\frac{C_{XY}}{g_{m3,4}+g_{m5,6}}\n\\ln\\!\\frac{V_{DD}/2}{\\Delta V_{0}}}_{\\text{regeneration}}\\qquad \n\\Delta V_{0}\\approx \\frac{\\Delta I_D}{I_{D}}\\,|V_{THP}|\n$$\n\nIncreasing $W_{5,6}$\n\n* does **not** increase the discharge current in the first phase,\n  since $M_{5,6}$ are off, but it increases $C_{XY}$ by the drain\n  junction capacitance of one device and the gate capacitance of\n  the cross-coupled device.  Hence the first term, and the time to\n  develop $\\Delta V_0$ and to turn on the pMOS latch, increase.\n  $\\Delta V_0$ itself is essentially unchanged.\n\n* in regeneration the current through $M_{5,6}$ is initially fixed\n  by $M_{1,2,7}$, not by $W_{5,6}$.  At fixed current\n  $g_m\\propto\\sqrt{W}$, while the parasitic capacitance\n  $\\propto W$.  Thus $g_{m5,6}/C_{XY}$ does not improve; it\n  typically falls, so the regeneration time constant\n  $C_{XY}/(g_{m3,4}+g_{m5,6})$ also increases.\n\nHence both the signal-development time and the regeneration time\ngrow.  $M_{5,6}$ are normally kept small — just large enough to\ncomplete the pull-up and hold the final state.",
        "format": "markdown",
        "sha256": "3ce71ae5d95eec585f020ad5a133e04634fa0a3e004bd748c47ee5f058389f76"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gets the central trend wrong: widening M5/M6 initially improves speed because stronger regeneration outweighs the added capacitance. It identifies added parasitic capacitance as a real eventual limitation, but incorrectly treats it as dominant from the outset.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3942,
        "input_tokens": 4061,
        "output_tokens": 5990,
        "total_tokens": 10051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3942,
        "input_tokens": 4061,
        "output_tokens": 5990,
        "total_tokens": 10051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5303,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a StrongARM dynamic latch. Its delay is\nessentially\n\n$$t_{d}\\approx t_{dis}+t_{reg}\\ln\\frac{\\Delta V_{logic}}{\\Delta V_{0}} $$\n\nand increasing $W_{5,6}$ hurts both terms.\n\n**1. Discharge before regeneration**\n\nWhen $CK$ rises, $X$ and $Y$ are initially at $V_{DD}$ and\n$M_{5},M_{6}$ are off. $C_{X,Y}$ must first be discharged\nthrough $M_{3,4}$-$M_{1,2}$ by about $|V_{THP}|$ before the\nPMOS latch even turns on:\n\n$$t_{dis}\\approx \\frac{C_{X,Y}\\,|V_{THP}|}{I_{SS}/2}$$\n\n$I_{SS}$ is set by $M_{1},M_{2},M_{7}$, not by $M_{5},M_{6}$.\nWidening $M_{5},M_{6}$ only adds their gate capacitance to the\nopposite output node and their drain capacitance to their own\noutput node, i.e. $C_{X,Y}\\uparrow$. Hence $t_{dis}\\uparrow$,\nwhile the differential voltage built up in this phase,\n$\\Delta V_{0}\\approx |V_{THP}|\\,\\Delta I_{in}/I_{SS}$, is\nunchanged.\n\n**2. Regeneration**\n\nOnce both cross-coupled pairs are on,\n\n$$\\Delta V_{out}(t)\\approx \\Delta V_{0}\\,\ne^{\\,t/\\tau_{reg}},\\qquad \n\\tau_{reg}\\approx\\frac{C_{X,Y}}{g_{m3,4}+g_{m5,6}} .$$\n\nAt the start of regeneration the branch current is about\n$I_{SS}/2$, so $g_{m5,6}\\propto\\sqrt{W_{5,6}}$, whereas the\ncapacitance contributed by $M_{5,6}$ is $\\propto W_{5,6}$.\nThus $C_{X,Y}/(g_{mn}+g_{mp})$ does not fall; for the\nself-loaded nodes shown it rises. The larger PMOS therefore\ngives no regeneration advantage to compensate for the\nslower initial discharge. It also makes the $S_{3},S_{4}$\nprecharge of $X,Y$ slower.\n\nIn short, wider $M_{5},M_{6}$ increase the load at $X$ and $Y$\nwithout increasing the discharging current: the comparator\ndecision time increases, i.e. the speed degrades (the only\nbenefit being somewhat smaller $M_{5,6}$ mismatch).",
        "format": "markdown",
        "sha256": "99af57b97b1a5b64b4a0ba4a93cc0f0a1eec1e89057ad22149b9bac236a3484f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the cross-coupled PMOS devices and the real parasitic-capacitance penalty, but wrongly concludes that this dominates from the outset. The expected trend is that stronger regeneration initially improves speed, with added capacitance limiting the benefit at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 7403,
        "total_tokens": 11464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4061,
        "output_tokens": 7403,
        "total_tokens": 11464,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The four $CK,\\overline{CK}$ devices are not signal devices.\nThey are switches in series with the signal devices,\ne.g. for node $X$\n\n$$V_{DD}-P_{Z}-P_{\\overline{CK}}-X-N_{CK}-M_{1,Z}-GND$$\n\nand similarly for node $Y$.  $X$ and $Y$ are dynamic nodes.\nIn one half cycle, e.g.,\n\n* $CK=1$ : the left hand clocked inverter is on, $X=\\bar Z$,\n  $Y$ is floating;\n* $CK=0$ : the right hand clocked inverter is on, $Y=\\bar X$,\n  $Z=\\bar Y$ through ${\\rm Inv_{3}}$, $X$ is floating,\n\nso that $Z$ toggles once per clock period.  The clock\nperiod must satisfy, roughly,\n$T_{CK}/2>t_{X}$ and $T_{CK}/2>t_{Y}+t_{{\\rm Inv_{3}}}$.\n\nThe current that must charge or discharge $X$, resp. $Y$,\nis the current of the series stack.  It is essentially set\nby the unchanged data devices, the upper $p$ device and\n$M_{1}$, whose gates are $Z$, resp. $X$.  Making the clock\ndevice wider decreases only the $R_{ck}$ part of\n$R_{data}+R_{ck}$, a decrease which rapidly saturates at\n$R_{data}$.\n\nWhat does increase, essentially in proportion to $W_{ck}$,\nis\n\n* the drain junction, and gate overlap, capacitance of the\nclock devices directly on the dynamic nodes $X$ and $Y$,\n* the source junction capacitance on the internal stack\nnodes between the data and the clock devices, with its\nassociated Elmore delay and charge sharing, and\n* the gate capacitance put on $CK$ and $\\overline{CK}$,\nslowing the clock edges themselves for any finite clock\ndriver resistance.\n\nIn Elmore form, e.g. for a pull up of $X$,\n\n$$\n\\tau_X\\;\\approx\\;R_{data}C_{mid}\n+\\bigl(R_{data}+R_{ck}\\bigr)\n\\Bigl(C_{g,next}+C_{db,ck}\\Bigr) \\qquad \nR_{ck}\\propto W_{ck}^{-1},\\;\\; C_{db,ck},C_{mid}\\propto W_{ck}\n$$\n\nand analogously for $Y$.  The $R_{ck}C_{g,next}$ term saved\nby a wider clock device is more than paid for by the\n$R_{data}C_{db,ck}$ and $R_{data}C_{mid}$ terms added, and by\nthe slower $CK/\\overline{CK}$ edge.  The slower slew at\n$Y$ in addition increases the delay of ${\\rm Inv_{3}}$ in\nthe loop.\n\nHence the $X$ and $Y$ transitions, and with them the maximum\ntoggle rate, get slower.  Clock devices in such TSPC/C$^{2}$MOS\nstages should be kept small; widening them degrades speed,\nwhile increasing clock power.",
        "format": "markdown",
        "sha256": "ad1cad474997b91182e2bf1591f8481896937bf018f060399563a2183750bb1a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked devices degrades speed, contrary to the required initial improvement from reduced on-resistance. Its capacitance and bottleneck analysis does not capture the initial benefit; the golden solution assigns this conclusion 2.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 9143,
        "total_tokens": 11351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 9143,
        "total_tokens": 11351,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two clocked inverters alternately drive the dynamic\nnodes $X$ and $Y$.  During one clock phase $X=\\overline Z$ must be\nestablished, and during the next $Y=\\overline X$, so that\n${\\rm Inv}_3$ can change $Z$.  The maximum clock frequency is\ntherefore set by the time needed to charge or discharge $X$ and $Y$.\n\nFor example, discharge of $Y$ takes place through the right-hand\nclocked NMOS and the right-hand $M_1$.  The transistor $M_1$ is\nalready on, with its gate at $X$, and for most of the transition it\nis saturated; it essentially fixes the discharge current.  The\nsame is true of the upper PMOS device on a charging transition.\nThe clocked device is merely the series switch that completes the\npath, with a small $V_{DS}$.\n\nHence widening a clocked transistor\n\n* lowers its series resistance, but does not appreciably increase\nthe current delivered to $X$ or $Y$, since that current is limited\nby the data transistor in series with it;\n* puts its drain junction and gate-drain capacitance directly on\n$X$ or $Y$, increasing $C_X$ and $C_Y$ roughly in proportion to $W$;\n* increases the capacitance of the internal stack node, worsening\ncharge sharing, and increases the load on $CK$ and $\\overline{CK}$,\nslowing the clock edges and increasing clock feedthrough to $X$\nand $Y$.\n\nTo first order the delay is\n\n$$\nt_p \\;\\approx\\; \\frac{C_{X,Y}\\,\\Delta V}{I_{\\text{data,sat}}}\\,,\n$$\n\nwith $I_{\\text{data,sat}}$ essentially unchanged while\n$C_{X,Y}$ grows.  The stage delay therefore increases and the\nmaximum operating frequency decreases.  Clocked devices in such\nC$^2$MOS stages are kept small; drive strength is obtained by\nwidening the data devices, whose drain capacitances are not\ndirectly on $X$ and $Y$.",
        "format": "markdown",
        "sha256": "c91b81813cf675477cff2127591f6dcba7734dfd67e8dcf79a72d92ea9ce7422"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked devices degrades speed because the data devices limit current. The golden solution says widening lowers series resistance and improves speed initially, with added node capacitance limiting or reversing the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 9111,
        "total_tokens": 11319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2208,
        "output_tokens": 9111,
        "total_tokens": 11319,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8469,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two clocked inverters form two $C^{2}{\\rm MOS}$ latches in a\nloop with ${\\rm Inv_{3}}$.\n\n$$ Z\\to X\\qquad {\\rm on}\\;CK ,\\qquad \n   X\\to Y\\to Z\\qquad {\\rm on}\\;\\overline{CK}$$\n\nso $Z$ toggles once per clock period.  $X$ and $Y$ are\ndynamic nodes: in one half cycle they must be completely\ncharged or discharged, in the other they float.\n\nWidening only the $CK,\\overline{CK}$ devices\n\n* does almost nothing for the current that charges $X$ or $Y$.\n  That current is set by the signal devices in series with\n  them, the $Z$-driven and the $X$-driven $p$ device and $M_{1}$,\n  whose sizes are unchanged.  The clock device, with its gate\n  at the rail, is essentially a switch already.\n\n* does increase, $\\propto W_{ck}$, the capacitance that those\n  signal devices have to drive:\n  $$C_{X}=C_{g,{\\rm next}}+C_{d,ckp}+C_{d,ckn},\\qquad\n    C_{Y}=C_{g,{\\rm Inv_{3}}}+C_{d,ckp}+C_{d,ckn} .$$\n  In Elmore terms the term $R_{\\rm in}C_{d,ck}$ in\n  $(R_{\\rm in}+R_{ck})(C_{L}+C_{d,ck})$ grows linearly with\n  $W_{ck}$ and outweighs the $1/W_{ck}$ decrease of $R_{ck}$.\n\n* increases, $\\propto W_{ck}$, the diffusion capacitance of the\n  internal source nodes of the clock devices.  Those nodes must\n  be pre-positioned by the signal device alone while the latch\n  is opaque, and they charge-share with $X$ or $Y$ when the\n  clock turns on.\n\n* increases the load $C_{g,ck}$ on $CK$ and $\\overline{CK}$,\n  slowing the clock edges themselves, and increases clock\n  feedthrough to the floating nodes $X$ and $Y$.\n\nHence, with $I_{\\rm drive}$ essentially fixed,\n$t_{X,Y}\\approx C_{X,Y}\\Delta V/I_{\\rm drive}$ increases.\nThe half-cycle delays increase and the maximum toggle\nfrequency decreases: the speed degrades.",
        "format": "markdown",
        "sha256": "c8a4079fec6e70d2d8839a6017245c5500d981ab4e06f66f5bfd0e8fde5e29eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that widening adds capacitance, but concludes speed degrades. The clocked devices’ reduced on-resistance initially improves speed; added capacitance limits or may reverse that benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2208,
        "output_tokens": 6903,
        "total_tokens": 9111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6154,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2150,
        "input_tokens": 2208,
        "output_tokens": 6903,
        "total_tokens": 9111,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6154,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two clocked stacks are dynamic inverters.\n\n* $CK=1,\\;\\overline{CK}=0$ : the left hand stack is on,\nthe right hand stack is off\n$$\nX=\\bar Z\\qquad Y,\\;Z\\;\\;{\\rm hold}\n$$\n\n* $CK=0,\\;\\overline{CK}=1$ : the left hand stack is off,\nthe right hand stack is on\n$$\nY=\\bar X\\qquad Z=\\bar Y=X\\qquad X\\;\\;{\\rm holds}\n$$\n\n$Z=\\bar Y$ is fed back to the input of the first stack.\nHence $X$ can change only on a rising $CK$ edge and\n$Z$ can change only on the following falling $CK$ edge, and\nboth toggle once per $CK$ period.  E.g. in steady state, with\n$T$ the $CK$ period,\n\n$$\\begin{array}{c|cccc}\n      &0\\!-\\!T/2&T/2\\!-\\!T&T\\!-\\!3T/2&3T/2\\!-\\!2T\\\\ \\hline\nCK &1&0&1&0\\\\\nX  &1&1&0&0\\\\\nZ  &0&1&1&0\\\\\nY=\\bar Z&1&0&0&1\n\\end{array}$$\n\ni.e. $X$ and $Z$ are $f_{CK}/2$ square waves of $50\\%$ duty\ncycle, displaced in time by $T/2$.  The output period is\n$2T$, so $T/2$ is a quarter of an output period:\n\n$$\n\\Delta\\phi = \\frac{T/2}{2T}\\,2\\pi = \\frac{\\pi}{2}\\;,\n$$\n\n$X$ and $Z$ - $Y=\\bar Z$ is the complement of $Z$ - are in\nquadrature.  Exact $90^{\\circ}$ requires a $50\\%$ duty cycle\n$CK$. ∎",
        "format": "markdown",
        "sha256": "6e8d004cb663b12c0f868e30ad5474503a266a65acee67c3e1aca24594252d38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly derives nominal divide-by-two quadrature from the half-input-period switching offset, but omits both key nonidealities: Inv3 delay and unequal loading of the latch outputs. Its duty-cycle caveat does not address those departures and may imply exact quadrature otherwise.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2193,
        "output_tokens": 12576,
        "total_tokens": 14769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2193,
        "output_tokens": 12576,
        "total_tokens": 14769,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11952,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two clocked inverters are $C^{2}$MOS latches.\n\n* On the left the clock devices are on for $CK=1$. Hence,\nfor $CK=1$,\n$$\nX=\\overline Z\n$$\nand for $CK=0$, $X$ is held on its node capacitance.\n\n* On the right the clock devices are on for $CK=0$. Hence,\nfor $CK=0$,\n$$\nY=\\overline X\\qquad\\Longrightarrow\\qquad Z=\\overline Y = X\\;{\\rm in\\;this\\;phase}\n$$\nand for $CK=1$, $Y$, and therefore $Z$, is held.\n\nThus the left latch is a master transparent on $CK$ high and\nthe right latch is a slave transparent on $CK$ low, connected\nas a toggle flip-flop, $D=\\overline Q$.  Starting e.g. from\n$(X,Z)=(1,0)$, in successive half clock periods\n\n$$\n\\begin{array}{c|ccccccccc}\n      &0&1&2&3&4&5&6&7&8\\\\ \\hline\nCK    &1&0&1&0&1&0&1&0&1\\\\\nX     &1&1&0&0&1&1&0&0&1\\\\\nZ     &0&1&1&0&0&1&1&0&0\n\\end{array}\n$$\n\ni.e.\n\n$$\n(X,Z):\\;(1,0)\\to(1,1)\\to(0,1)\\to(0,0)\\to(1,0)\\cdots\n$$\n\n$X$ changes only on the rising edge of $CK$ and $Z$ only on\nthe falling edge. Both $X$ and $Z$ therefore have period\n$2T_{CK}$, $50\\%$ duty cycle, and the transitions of $Z$ lag\nthose of $X$ by $T_{CK}/2$, one quarter of the output period\n$2T_{CK}$.\n\nHence, for a $50\\%$-duty-cycle clock, $X$ and $Z$ are\ndivide-by-two outputs in quadrature, $90^{\\circ}$ apart at\n$f_{CK}/2$. $Y=\\overline Z$ is the complementary $Q$ phase.\nIn practice $X$ is a dynamic node and should be brought out\nthrough a buffer matched to ${\\rm Inv_3}$.",
        "format": "markdown",
        "sha256": "9689629ea149eb4fce91c0eadb0fb7d27b684d8e1ab703e2bdb1e7eddc4f3861"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives the ideal divide-by-two quadrature between X and Z. The recommendation to match the X buffer to Inv3 gestures at the unequal-loading issue, but it omits the phase skew caused by Inv3’s delay, so the practical outputs are not fully characterized.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2193,
        "output_tokens": 14952,
        "total_tokens": 17145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2193,
        "output_tokens": 14952,
        "total_tokens": 17145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two clocked stages are C$^{2}$MOS latches.\n\n* The left latch is on for $CK=1,\\;\\overline{CK}=0$ and\nholds $X$ for $CK=0$.\n* The right latch is on for $CK=0,\\;\\overline{CK}=1$ and\nholds $Y$ for $CK=1$.\n\n$ {\\rm Inv_3}$ makes the d-c feedback to the left latch\n$Z=\\bar Y$.\n\nFor $CK=1$ the left latch is an inverter, the right latch holds:\n$$\nX^+ = \\bar Z = Y ,\\qquad Y^+=Y .\n$$\n$X$ can change only at the rising clock edge.\n\nFor $CK=0$ the right latch is an inverter, the left latch holds:\n$$\nY^+ = \\bar X ,\\qquad Z^+ = \\bar Y^+ = X .\n$$\n$Y$ (and $Z$) can change only at the falling clock edge.\n\nHence $Y$ toggles once per clock period: it is a\ndivide-by-two signal.  $X$ also toggles once per clock\nperiod, i.e. it is also at $f_{CK}/2$, with $50\\%$ duty\ncycle for a $50\\%$ clock.  In successive $CK$ half-cycles,\ne.g.,\n\n$$\\begin{array}{c|cccccc}\nCK & 1&0&1&0&1&0\\\\ \\hline\nX  & 0&0&1&1&0&0\\\\\nY  & 0&1&1&0&0&1\\\\\nZ  & 1&0&0&1&1&0\n\\end{array}$$\n\n$X$ changes on one clock edge and $Y$ on the opposite\nedge.  The separation is $T_{CK}/2$, whereas the output\nperiod is $2T_{CK}$.  That is $T_{out}/4$, i.e. $90^{\\circ}$,\nbetween the master output $X$ and the slave output $Y$\n(or $Z$).  In principle $X$ and $Y$ are the quadrature\ndivided outputs, assuming a $50\\%$ duty-cycle clock.",
        "format": "markdown",
        "sha256": "3239cd35110aff81d50267ef708defb1e724df3f568dd129d4643fe277f1cb38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the nominal divide-by-two quadrature from the opposite-edge switching, but gives only the ideal argument and omits the inverter-delay skew and unequal latch loading that make the outputs non-exactly quadrature.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2193,
        "output_tokens": 8836,
        "total_tokens": 11029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2193,
        "output_tokens": 8836,
        "total_tokens": 11029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8168,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The two stacked inverters are alternately enabled\n$C^{2}$MOS inverters.  With the static inverter in the loop\nthe circuit is a $\\div 2$ circuit.\n\n```\n                A                B\n  F  ---[inv CK]-----[inv CKbar]-----o--[inv]--- F\n```\n\n$A$ and $B$ are dynamic nodes.  Each must be evaluated,\nand hold its value on its capacitance, in one half clock\nperiod.  Let, in one inverter, $X_{P}$ and $X_{N}$ be the\nnodes between the clock transistor and the signal\ntransistor on the $p$ and on the $n$ side.\n\nWhen, e.g., the first inverter is on with $A=V_{DD}$, its\nsignal $n$-device is off and its clock $n$-device has pulled\n$X_{N}$ to ground.  $CK$ now goes low, the first inverter is\nturned off and $A$ is left floating at $V_{DD}$.  The second\ninverter evaluates, $B$ changes, the static inverter changes\n$F$, i.e. the input of the first inverter changes, turning\nits signal $n$-device on.  The charge stored on $C_{A}$ is\nnow shared with the charge on $C_{X_{N}}$, which is at\nground:\n\n$$ \nA:\\;V_{DD}\\;\\longrightarrow\\;\nV_{DD}\\,{C_{A}\\over C_{A}+C_{X_{N}}}\\qquad \n\\Delta V = V_{DD}\\,{C_{X_{N}}\\over C_{A}+C_{X_{N}}}\n$$\n\nand analogously on the $p$ side, and at $B$ in the other\nhalf cycle.  The corrupted $A$ is the input of the second,\nnow evaluating, inverter: its pull-down overdrive is\nreduced, its pull-up may even turn on slightly, and it\nswitches much more slowly.  $A$ is floating, so the lost\nvoltage is never restored in that half cycle.\n\nNow\n\n$$\nC_{X}\\;\\approx\\;C_{db,\\,{\\rm clock}}+C_{sb,\\,{\\rm signal}}\\;\\propto\\;W_{\\rm clock}\n$$\n\nso widening the clock devices increases $C_{X}$ and\nincreases the charge-sharing droop on the dynamic nodes\n$A$ and $B$.  The series resistance $R_{ck}C_{X}$ is\nessentially independent of $W_{ck}$, the resistance\nbenefit on charging $C_{A,B}$ is limited by the unchanged\nsignal device in series, and the larger $C_{g,ck}$ in\naddition loads $CK,\\overline{CK}$.\n\nHence, counter to first intuition, widening the clocked\ntransistors lowers the maximum toggle frequency, and can\ncause failure to divide.  The clock devices should be no\nwider than necessary.",
        "format": "markdown",
        "sha256": "36aa9dbce9c9aff6969dc0e2472e8307b90bf7d1d7129b1ac825895a339331e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked transistors degrades speed and may make the divider fail. Although it identifies charge sharing, the golden solution says the reduced series resistance improves speed considerably and the swing degradation is acceptable up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 8656,
        "total_tokens": 10833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 8656,
        "total_tokens": 10833,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7824,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a dynamic $\\div 2$: two clocked inverters in a loop with the output inverter. Their outputs are dynamic nodes — when a clocked inverter is off, its output level exists only as charge on the node capacitance, with no keeper to restore it.\n\nWidening the four $CK/\\overline{CK}$ devices gives very little extra drive, because each is in series with an unchanged signal transistor: $R_{on}$ quickly becomes dominated by the signal device. What widening does increase, roughly proportionally to $W$, is:\n\n1. **The diffusion capacitance at the internal stack nodes** (between each clock transistor and its signal transistor), and\n2. **The gate load on $CK/\\overline{CK}$**, slowing the clock edges themselves.\n\nThe first effect is fatal here because of charge sharing. Consider the NMOS side of a clocked inverter while it is on with its output high: the signal NMOS is off, the clock NMOS is on, so the internal stack node is pulled to ground. The inverter then turns off, and — through the feedback loop — its input toggles. The signal NMOS now turns on and connects that grounded internal node to the dynamic output node, which is supposed to be holding a \"1\". The output droops to\n\n$$V_{DD}\\,\\frac{C_{out}}{C_{out}+C_{stack}}, \\qquad \\Delta V = V_{DD}\\,\\frac{C_{stack}}{C_{out}+C_{stack}}.$$\n\nThe PMOS side does the complementary damage to a stored \"0\". Since $C_{stack}\\propto W_{clock}$, a wider clock device produces a larger droop every half-cycle. That reduced level is what drives the next stage for the rest of the phase: lower overdrive, slower discharge/charge, and, if the droop is large enough, the complementary device of the next inverter begins to turn on and fights the transition. The level cannot be restored until the next active phase.\n\nSo beyond the small width needed to make the clock device's resistance a minor part of the stack resistance, **increasing the clocked-transistor widths degrades the maximum operating speed** — and can eventually cause outright failure. In high-speed dynamic dividers the clocked devices are therefore kept small.",
        "format": "markdown",
        "sha256": "c7326a7ca8413f7b28c4222a55b7ab99b21abdff4ffab5b7f65b9a4016f67b6f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It describes an initial benefit from reducing the clock-device resistance, followed by degradation beyond a sizing point due to charge sharing. That matches the golden solution’s explicit full-credit rule for improvement followed by a charge-sharing limit, even though it overstates the severity of the swing loss.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 12539,
        "total_tokens": 14716,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 12539,
        "total_tokens": 14716,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11876,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is the $C^{2}MOS$ divide-by-two. The first\nclocked inverter is on for $CK=1$, the second for $CK=0$,\nand the static inverter closes the loop. Hence the outputs\nof the two clocked inverters, say $X$ and $Y$, are not driven\nfor alternate half cycles. They are dynamic nodes: the\nvalue is stored only on their capacitance.\n\nCall $X_{1}$ the internal node between the upper clocked\n$PMOS$ and the upper data $PMOS$ of the first latch, and\n$X_{2}$ the corresponding node in the lower branch. When\nthe latch has been on, $X_{1}$ is pulled to $V_{DD}$ by the\nclock device and $X_{2}$ to ground, irrespective of the\ndata. When the latch turns off $X_{1},X_{2}$ and $X$ float.\n\nDuring the off half cycle the other latch and the feedback\ninverter change the data input of the off latch. The data\ndevice therefore turns on and connects the floating output\n$X$ to an internal node which is at the opposite rail.\nE.g. with $X$ stored at $V_{DD}$, the NMOS data device turns\non and connects $X$ to $X_{2}=0$. Charge is shared between\n$C_{X}$ and $C_{int}$, the capacitance at $X_{2}$:\n\n$$\n\\Delta V_{X}\\;\\approx\\;V_{DD}\\,\n\\frac{C_{int}}{C_{int}+C_{X}}\\;,\n$$\n\nand analogously for a stored $0$ through the PMOS side.\nThe same occurs at $Y$ in the other half cycle.\n\n$C_{int}$ is essentially the drain junction and overlap\ncapacitance of the clocked device. Increasing $W_{ck}$\n\n* increases $C_{int}\\propto W_{ck}$, hence increases\n$\\Delta V_{X},\\Delta V_{Y}$;\n* therefore leaves the still-active downstream latch with a\ndegraded input, $V_{DD}-\\Delta V$ instead of $V_{DD}$. Its\ndrive current $\\propto (V_{DD}-\\Delta V-|V_{th}|)^{2}$ falls\nrapidly, and for large $\\Delta V$ it can even be spuriously\nswitched within the same half cycle;\n* increases the capacitance that must be restored through\nthe data device when the latch turns on again;\n* increases the gate load on $CK$ and $\\overline{CK}$, slowing\nthe clock edges, to which $C^{2}MOS$ delay is very sensitive.\n\nThe reduction in the series resistance of the clock device,\n$\\propto 1/W_{ck}$, is more than outweighed by these effects.\nThe maximum clock frequency at which the circuit still\ndivides correctly therefore decreases. In practice the\nclocked devices are kept near minimum size.",
        "format": "markdown",
        "sha256": "b9c00b5bb76e5a690d9a2a52bc4ce7aaf5f307d38105541d4cfe57e2dd9aa277"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that widening the clocked transistors degrades speed and makes charge sharing harmful, opposite to the key result: speed improves considerably because the devices add little loading to the data path. This is Razavi’s specified score for that conclusion.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 9280,
        "total_tokens": 11457,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 9280,
        "total_tokens": 11457,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8447,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Label the nodes as\n\n```\n        CK      Inv1    CK      Inv2    Inv3\n  E o---/ ------o-->o---/ ------>o----->o---o\n  ^             A      B         C      D     |\n  |___________________________________________|\n```\n\n$E$ is taken as the output. In the ideal model an\ninverter whose input is disconnected holds its input\nvoltage on the parasitic capacitance at that input.\n$CK$ and $\\overline{CK}$ are assumed never to be closed\nsimultaneously.\n\nLet $Q_n$ be the value of $E$ during the $n$-th interval\nfor which $CK=1$.\n\n### $CK=1,\\ \\overline{CK}=0$\n\nThe left switch is closed and the middle switch is open.\nHence\n\n\\[\nA=E,\\qquad B=\\bar A=\\bar E .\n\\]\n\nNode $C$ is floating. It holds its previous value, and the\ntwo inverters to the right give\n\n\\[\nD=\\bar C,\\qquad E=\\bar D=C .\n\\]\n\nThus nothing changes at the output during this phase. What\nis important is that the present output $Q_n$ is written onto\nthe capacitance at $A$:\n\n\\[\nA_n = Q_n .\n\\]\n\n### $CK=0,\\ \\overline{CK}=1$\n\nNow the left switch is open and the middle switch is\nclosed. Node $A$ floats, so it retains $A_n=Q_n$. Therefore\n\n\\[\nB=\\bar A_n=\\bar Q_n,\\qquad C=B=\\bar Q_n,\n\\]\n\\[\nD=\\bar C,\\qquad E=\\bar D=C=\\bar Q_n .\n\\]\n\nThe output therefore changes once, just after $CK$ goes\nlow, to $\\bar Q_n$.\n\nAt the end of this phase $C=\\bar Q_n$ is stored on the\ncapacitance at the input of the second inverter. In the\nnext $CK=1$ phase that stored value becomes the new\noutput. Consequently\n\n\\[\n\\,Q_{n+1}=\\bar Q_n\\,.\n\\]\n\nFor example, starting with $Q=0$:\n\n| phase | $CK$ | stored $A$ | stored $C$ | $E$ |\n|---|---:|---:|---:|---:|\n| 1 | 1 | 0 | 0 | 0 |\n|   | 0 | 0 | 1 | 1 |\n| 2 | 1 | 1 | 1 | 1 |\n|   | 0 | 1 | 0 | 0 |\n| 3 | 1 | 0 | 0 | 0 |\n\nThe output therefore stays constant for one full clock\nperiod, then changes for the next full period:\n\n```\nCK : _/‾‾\\__/‾‾\\__/‾‾\\__/‾‾\\_\nE  : ‾‾0‾‾|‾‾‾1‾‾‾|‾‾‾0‾‾‾|‾\n            toggles only on CK falling\n```\n\n## Conclusion\n\nThe circuit is a **dynamic toggle flip-flop, i.e. a\ndivide-by-two circuit**:\n\n\\[\nf_E=\\frac{f_{CK}}{2}.\n\\]\n\nIt is not a static latch. Although three inverters are\nconnected in a ring, the ring is never closed all at once;\nthe two floating nodes alternately store the bit. The odd\nnumber of inversions around the ring makes the recirculated\nbit come back inverted after every clock cycle.\n\nPractical consequences:\n\n- $CK$ and $\\overline{CK}$ must not both be on: that would\n  close the three-inverter ring and produce a ring oscillator,\n  destroying the stored state. A small both-off dead time is\n  normally used.\n- The storage is dynamic. Leakage on nodes $A$ and $C$\n  limits how long a phase may last, so there is a minimum\n  clock frequency and the clock cannot simply be stopped.\n- The half-period must allow settling through the switch\n  plus the inverter chain, which sets the maximum clock\n  frequency.\n- There is no data input and no defined starting phase:\n  on power-up the divider may start in either of its two\n  phase states.",
        "format": "markdown",
        "sha256": "9b8567e7cdea2496a3d91a394d55530a963e433fa8b6a0361d53b36e6f19a7cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch toggle divider and explains that the output toggles once per input-clock period, giving half the input frequency. The extra implementation details are not needed for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1425,
        "output_tokens": 6677,
        "total_tokens": 8102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5604,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1425,
        "output_tokens": 6677,
        "total_tokens": 8102,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5604,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Label the nodes as\n\n```\n        CK          Inv1     CK         Inv2      Inv3\n Q o---/ ---o A ----|>o----o B ---/ ---o C ----|>o---o D ---|>o---o Q\n ^                                                                     |\n +---------------------------------------------------------------------+\n```\n\nA switch is closed when its control is high. $CK$ and\n$\\overline{CK}$ are assumed non-overlapping, so the two switches are\nnever closed together. The storage elements are the input\ncapacitances of $Inv_{1}$ and $Inv_{2}$ at nodes $A$ and $C$; the circuit\nis dynamic.\n\n### $\\overline{CK}$ phase: $CK$ open, $\\overline{CK}$ closed\n\nNode $A$ is floating and retains its previous value. Let it be $X$.\nThen\n\n$$B=\\bar X,\\qquad C=B=\\bar X,\\qquad D=X,\\qquad Q=\\bar D=\\bar X .$$\n\nSo during this phase the (held) value at $A$ propagates through the\nthree inverters, and $Q$ is set to $\\bar A$.\n\n### $CK$ phase: $CK$ closed, $\\overline{CK}$ open\n\nNow $C$ is floating and retains its value, while $Q$ drives $A$:\n\n$$A=Q,\\qquad Q=C\\;\\;(\\text{through }Inv_{2},Inv_{3}),$$\n\nso $Q$ itself does not change in this phase; it merely writes its\nvalue into $A$.\n\n### One full clock cycle\n\nSuppose in a $\\overline{CK}$ phase $A=X$, so $Q=\\bar X$.\nIn the next $CK$ phase $A\\leftarrow Q=\\bar X$.\nIn the next $\\overline{CK}$ phase this new $A$ is held, so\n\n$$Q_{\\text{new}}=\\overline{A}=\\overline{\\bar X}=X=\\bar Q_{\\text{old}}.$$\n\nThus $Q$ inverts once per complete $CK$ period. E.g., starting\nwith $A=0$:\n\n| phase | $\\overline{CK}$ | $CK$ | $\\overline{CK}$ | $CK$ | $\\overline{CK}$ |\n|---|---|---|---|---|---|\n| $A$ | 0 | 1 | 1 | 0 | 0 |\n| $Q$ | 1 | 1 | 0 | 0 | 1 |\n\nHence this is a toggle (T) flip-flop, i.e. a divide-by-two:\n\n$$f_Q=\\frac{f_{CK}}{2},$$\n\nwith $Q$ changing in the $\\overline{CK}$ phase (on the falling edge of\n$CK$) and a 50% duty cycle. Every node in the loop is in fact a\n$f_{CK}/2$ waveform, phase-shifted according to which phase updates it.\n\nAt first glance the three inverters in a loop might suggest a ring\noscillator. That does not happen in normal operation because the loop\nis never closed: one switch is always open. It is essentially two\ndynamic latching stages in a loop with an odd number (three) of\ninversions, so the recirculated bit returns inverted. (With an even\nnumber it would recirculate unchanged and act as a dynamic memory.)\n\nPractical caveats:\n\n* $CK$ and $\\overline{CK}$ must be non-overlapping. If both switches\n  conduct substantially, the three inverters form a closed ring and\n  tend to oscillate with period $\\approx 6t_{pd}$, producing spurious\n  toggles.\n* Storage at $A$ and $C$ is only on parasitic/gate capacitance, so the\n  circuit is dynamic: there is a minimum clock frequency set by\n  leakage, and the state is lost if the clock stops with a node left\n  floating.\n* Each phase must be long enough to charge the dynamic node and settle\n  the inverter chain; this sets the maximum clock frequency.\n* There is no reset, so the phase of the divided output at power-up is\n  indeterminate.\n\nIt is a very compact, fast dynamic $\\div 2$ counter, widely useful as\nthe first divider stage in clock-generation/PLL prescalers.",
        "format": "markdown",
        "sha256": "14c088cbe49b89680a800d7da3cfe7903b9a2d5885a4bfa71b3b73997b1369bc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as a dynamic-latch divide-by-two and explains the half-frequency output through alternating phases. The golden solution grants full credit for this identification; detailed signal-path claims are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1425,
        "output_tokens": 9107,
        "total_tokens": 10532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1425,
        "output_tokens": 9107,
        "total_tokens": 10532,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Label the output of the right-most inverter as $Q$, and the other nodes as\n\n- $A$: input of $\\text{Inv}_1$\n- $B$: output of $\\text{Inv}_1$\n- $C$: input of the middle inverter\n\nso that\n\n$$\nB=\\overline A,\\qquad Q = C\\ \\text{(through two inverters)} .\n$$\n\nThe two switches are driven by complementary, ideally non-overlapping, clocks: when $CK$ is high the left switch is closed and the $\\overline{CK}$ switch is open, and vice-versa. The crucial point is that the loop is **never closed in the d-c sense**. The parasitic/gate capacitances at $A$ and $C$ act as dynamic storage elements.\n\n### Phase 1: $CK=1,\\ \\overline{CK}=0$\n\nThe left switch is closed, the right switch is open.\n\n$$\nA = Q,\\qquad B=\\overline A = \\overline Q .\n$$\n\nNode $C$ is floating, but its capacitance retains the value it had in the previous phase, so $Q$ (driven through the last two inverters from $C$) is held unchanged. In this phase the first inverter *samples* $Q$ and prepares $\\overline Q$ at $B$.\n\n### Phase 2: $CK=0,\\ \\overline{CK}=1$\n\nThe left switch opens, the right switch closes. Node $A$ is now floating, but retains the sampled value of $Q$, so $\\text{Inv}_1$ keeps driving\n\n$$\nB = \\overline{Q_{\\text{old}}}.\n$$\n\nWith the $\\overline{CK}$ switch closed,\n\n$$\nC = B = \\overline{Q_{\\text{old}}},\\qquad \nQ_{\\text{new}} = C = \\overline{Q_{\\text{old}}}.\n$$\n\nHence, once per full clock period,\n\n$$\n\\boxed{\\,Q^{+} = \\overline{Q}\\,}\n$$\n\ni.e. the circuit is a **toggle (T) flip-flop with $T\\equiv1$**, or equivalently a **divide-by-2 counter**.\n\nA typical sequence, starting from $Q=0$, is\n\n| phase | $A$ | $B$ | $C$ | $Q$ |\n|---|---|---|---|---|\n| $CK$ | 0 | 1 | (held 0) | 0 |\n| $\\overline{CK}$ | (held 0) | 1 | 1 | **1** |\n| $CK$ | 1 | 0 | (held 1) | 1 |\n| $\\overline{CK}$ | (held 1) | 0 | 0 | **0** |\n\nSo $Q$ toggles on every $\\overline{CK}$ phase, stays constant in between, and therefore has period $2T_{CK}$ (frequency $f_{CK}/2$) with approximately 50% duty cycle. The output of the middle inverter provides $\\overline Q$.\n\n### Interpretation and limitations\n\n- Structurally it is two dynamic latches in a loop: an inverting master latch ($CK$ switch + $\\text{Inv}_1$) followed by a non-inverting slave latch ($\\overline{CK}$ switch + two inverters), with the slave output fed back to the master input. The odd number of inversions in the loop produces toggling rather than storage because the loop is broken in time by the two clock phases.\n- The clocks must be essentially non-overlapping (\"break-before-make\"). If both switches were closed simultaneously, the three inverters would form an odd ring with no stable state — it could oscillate or settle unpredictably.\n- It is a **dynamic** circuit: nodes $A$ and $C$ are floating for half a cycle. Leakage, charge sharing, and clock feedthrough corrupt the stored charge if the clock is too slow, so there is a minimum operating frequency, and the state is lost if the clock stops. Conversely, each phase must be long enough for the switch plus inverter delay(s) to settle, setting the maximum frequency.\n- The initial state after power-up is arbitrary, but from then on the toggling is deterministic (no reset is provided).\n\nIn short: despite looking like an unstable 3-inverter ring, the complementary clocked switches turn it into a well-defined dynamic master–slave toggle flip-flop — the classic $\\div 2$ prescaler/counter stage.",
        "format": "markdown",
        "sha256": "832199bd20fbb1e7d30a0c210887399ab8c86ffd523d9582e3dfb5c1e86bb9fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic-latch divide-by-two and explains its alternating sample/hold, toggle behavior, and half-frequency output, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1425,
        "output_tokens": 6479,
        "total_tokens": 7904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1425,
        "output_tokens": 6479,
        "total_tokens": 7904,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a dynamic master–slave divide-by-two. Let\n\n- $Q$ be the node at the far left (the output of the last black inverter, fed back to the input), and\n- $X$ be the output of $\\text{Inv}_1$.\n\nThe red inverter is an **unclocked feed-forward inverter in parallel with the clocked master latch** ($\\text{CK}$ switch $+\\ \\text{Inv}_1$). It is not a keeper: a keeper would feed $X$ back to the input of $\\text{Inv}_1$, whereas this device feeds $Q$ forward to $X$ at all times.\n\n**When $CK$ is on ($\\overline{CK}$ off)** the master is transparent and the slave holds $Q$. The input of $\\text{Inv}_1$ is then $Q$ (through the closed switch), so the red inverter and $\\text{Inv}_1$ do exactly the same job, in parallel:\n\n$$X=\\bar Q .$$\n\nTwo things help speed. First, the red path bypasses the series resistance of the $\\text{CK}$ switch, so $X$ starts moving as soon as $Q$ moves instead of waiting for the input node of $\\text{Inv}_1$ to charge through the switch. Second, once $\\text{Inv}_1$ turns on, two inverters drive the capacitance at $X$ instead of one. The master therefore settles in well under a half clock period, and the maximum toggle frequency of the divider goes up. In fact the red inverter even starts pre-driving $X$ toward its *next* value during the preceding $\\overline{CK}$ phase, so part of the master delay is hidden.\n\n**When $CK$ is off ($\\overline{CK}$ on)** the master is supposed to be in hold and completely isolated from the slave. $\\text{Inv}_1$ holds $X=\\bar Q_{\\text{old}}$ from the charge stored on its input node, the slave makes $Q_{\\text{new}}=X=\\bar Q_{\\text{old}}$, and the divider has toggled. But the red inverter is still connected, and it now *disagrees* with $\\text{Inv}_1$:\n\n$$\\text{Inv}_1:\\; X=\\bar Q_{\\text{old}}=Q_{\\text{new}},\\qquad \n\\text{red}:\\; X=\\bar Q_{\\text{new}}=Q_{\\text{old}} .$$\n\nSo during the whole hold phase the red inverter fights $\\text{Inv}_1$ for node $X$: there is contention (crowbar) current, the swing and noise margin at $X$ are degraded, and the red device’s gate capacitance loads $Q$ while its drain capacitance loads $X$, slowing the slave a little and raising power. Worse, $X\\!\\to\\!$Inv$_2\\!\\to\\!$Inv$_3\\!\\to\\!Q\\!\\to\\!$red$\\!\\to\\!X$ is a closed loop of three inverters. If the $\\overline{CK}$ phase lasts longer than the delay around that loop, $X$ is dragged across the slave’s threshold, $Q$ flips back, then flips again — the loop ring-oscillates and the $\\div2$ action is lost. Correct operation at high speed relies on the clock phase ending before that unwanted second toggle gets around the loop.\n\n**Net effect:** the operating window is shifted *up* in frequency. $f_{\\max}$ increases (the reason the device is added in RF prescalers, where the clock is always present and fast), but a substantial $f_{\\min}$ appears, well above the leakage-limited minimum of the plain dynamic divider: the circuit misbehaves at low clock rates, oscillates if the clock stops with $CK$ low, and burns extra power in contention. The red inverter is therefore sized as a compromise — strong enough to start $X$ swinging quickly, weak/delayed enough not to overpower $\\text{Inv}_1$ and corrupt $X$ within one half-cycle.",
        "format": "markdown",
        "sha256": "e2ab5978dcb5a23dd460e733eae6f33ad848281897031cc0e56c72593cf6bf16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the red inverter as an unclocked feedforward path that bypasses part of the first latch and improves high-speed operation, while also recognizing the low-frequency regenerative-loop/contention problem that raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1226,
        "output_tokens": 14814,
        "total_tokens": 16040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1226,
        "output_tokens": 14814,
        "total_tokens": 16040,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13764,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The black circuit is a dynamic recirculating flip-flop.\nThe state is held, in alternate clock phases, as charge on\nthe input capacitance of ${\\rm Inv}_1$ and on the input\ncapacitance of the following inverter.  It therefore has a\nminimum clock frequency set by leakage.\n\nThe red inverter is meant to be the back-to-back keeper\nfor ${\\rm Inv}_1$, but as drawn it is not connected directly\nacross ${\\rm Inv}_1$: its loop contains the $CK$ switch.\n\n* $CK$ off, $\\overline{CK}$ on: this is the phase in which\nthe input node of ${\\rm Inv}_1$ is floating and needs to be\nheld.  The $CK$ switch is open, so the keeper loop is open.\nThat node still floats and still leaks.  The circuit is not\nmade static, and $f_{\\min }$ and clock-stop behaviour are\nunchanged.\n\n* $CK$ on: the keeper loop is closed, but the input of\n${\\rm Inv}_1$ is then already driven through $CK$ by the\nrecirculating signal.  The keeper is redundant.\n\nWorse, in the $\\overline{CK}$ phase the output of the red\ninverter is tied to the recirculating node.  When the right\nhand inverters try to toggle that node to its new value,\nthe red inverter, fed from the old output of ${\\rm Inv}_1$,\ntries to hold it at its old value.  The right-most inverter\nmust overpower the red inverter on every toggle.  The red\ninverter also loads the output of ${\\rm Inv}_1$ and the\nrecirculating node.\n\nHence, as drawn, the red inverter gives no static-holding\nbenefit, but increases clock-to-output delay and contention\npower, lowers $f_{\\max }$, and, if it is not much weaker than\nthe right-most inverter, can prevent the circuit from\ntoggling at all.  A useful keeper must be connected directly\nacross ${\\rm Inv}_1$, on the ${\\rm Inv}_1$ side of the $CK$\nswitch, and made deliberately weak.",
        "format": "markdown",
        "sha256": "193c84e4996f8784e13752560b6b0a446f0e5bc87778f9aa71ead596ab565fe8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper whose loop contains the CK switch, missing that it bypasses the switch and Inv1 as a feedforward path that improves speed. It also says the minimum-frequency limit is unchanged and predicts reduced maximum speed, contrary to the key effects. Its observation that the red inverter can contend with the main path is relevant, but does not rescue the incorrect topology and conclusion.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1226,
        "output_tokens": 20911,
        "total_tokens": 22137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1226,
        "output_tokens": 20911,
        "total_tokens": 22137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The black circuit is a dynamic toggle flip-flop. The values at\nthe inputs of the inverters are stored only on gate capacitance\nwhile $CK$ or $\\overline{CK}$ is off, so it will not retain its\nstate for a long, or stopped, clock period.\n\nThe red inverter is a feedback, or keeper, inverter around\n${\\rm Inv_1}$.  It cross-couples the first stage:\n\n* it regeneratively holds the state of ${\\rm Inv_1}$, so leakage\nat the dynamic node no longer destroys the stored bit.  In\nprinciple the stage now works down to dc, with much better\nimmunity to leakage and noise.\n\n* on every change of state the new value must fight the keeper.\nThe driver, here the last inverter through the $CK$ switch,\nmust overpower the red inverter, and the red inverter loads\nthe output of ${\\rm Inv_1}$.\n\nHence retention is gained at the expense of speed and power:\nlarger clock-to-output delay, contention current during\nswitching, increased power, and a lower maximum toggle\nfrequency.  The red inverter must therefore be made very weak\n-- small $W/L$, long channel -- compared with ${\\rm Inv_1}$ and\nwith the inverter driving it.  Made full strength, it will\nseriously slow, and can even prevent, the divide-by-two\naction.",
        "format": "markdown",
        "sha256": "37bf6fda77c03dc15792a9155738f21de4c448cb16e8ee17848f9e437e9b1090"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the red inverter as a keeper rather than an unclocked feedforward path, and reverses both performance effects: the branch speeds high-rate operation but raises the minimum usable clock frequency. The loading/contention observation does not capture the key mechanism.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1226,
        "output_tokens": 28076,
        "total_tokens": 29302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1226,
        "output_tokens": 28076,
        "total_tokens": 29302,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27608,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The connections are wrong for a keeper.\n\nCall the node between the $CK$ switch and ${\\rm Inv}_1$ by $x$, the\noutput of ${\\rm Inv}_1$ by $m$, and the fed-back node at the far left\nby $a$.\n\nA keeper for ${\\rm Inv}_1$ would sense $m$ and drive $x$:\n\n$$\nm \\;\\longrightarrow\\; \\text{inverter}\\;\\longrightarrow\\; x ,\n$$\n\nso that, with the $CK$ switch off, ${\\rm Inv}_1$ and the keeper are\ntwo inverters head-to-tail around $x$ and $m$.\n\nThe red inverter does the opposite.  It senses $a$, the node\n*before* the $CK$ switch, and drives $m$, the node *after*\n${\\rm Inv}_1$.  Hence\n\n* for $CK=1$, $x=a$ and the red inverter is simply in parallel\n  with ${\\rm Inv}_1$;\n* for $CK=0$, $x$ is disconnected from the red inverter, and\n  the charge on the input capacitance at $x$ is not refreshed\n  by it.\n\nSo there is no cross-coupled pair $ {\\rm Inv}_1$ / red inverter.\n\nIn fact the surrounding black circuit is the usual two-phase\ndynamic master-slave toggle flip-flop, i.e. a divide-by-two:\n$CK$–${\\rm Inv}_1$ is the dynamic master, $\\overline{CK}$ and the\nnext inverter are the dynamic slave, and the last inverter feeds\nthe complemented output back to $a$.  It toggles once per clock\ncycle.\n\nThe red inverter is a non-clocked *feed-forward* inverter in\nparallel with the whole master latch, switch plus ${\\rm Inv}_1$,\nfrom the fed-back node $a$ directly to the master output $m$.\nAfter the slave has copied $m$ and the fed-back node $a$ has\ntoggled, the red inverter is the path that presents\n$\\bar a$ — the next value of the master output — at $m$; when\n$CK$ closes again this value is written onto $x$ and taken over\nby ${\\rm Inv}_1$, the two inverters then driving $m$ in the same\ndirection.  It is therefore in the toggle/data path of the\ndivider — an always-on preset/update path for the master, of the\nkind used in extended-TSPC dividers — not the element that\nstores the master bit.  During the $\\overline{CK}$ interval the\ncharge stored at $x$, through ${\\rm Inv}_1$, is what temporarily\nholds the old $m$ while the slave is copying it; indeed for part\nof that interval the red inverter is contending with\n${\\rm Inv}_1$, the opposite of what a keeper does.\n\nConsequently it also does not remove the minimum clock\nfrequency.  Both dynamic storage nodes — $x$ and the input node\nof the slave inverter — are still just parasitic capacitances\nrefreshed once a cycle and discharged by leakage.  The second\none has no keeper of any kind.  Run the clock slowly enough, or\nstop it, and those charges, and hence the divided state, are\nstill lost.",
        "format": "markdown",
        "sha256": "1eabcf667ea57dc85a064202613cfbcb3b72801dc20d4c1957e162abc29fd58b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as a feedforward path bypassing the switch and Inv1. But it misses the key tradeoff: the unclocked branch can form a regenerative loop and overpower the intended latch at low clock rates, raising the minimum usable frequency. Attributing the limitation only to leakage misses the dominant mechanism.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1269,
        "output_tokens": 43613,
        "total_tokens": 44882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1269,
        "output_tokens": 43613,
        "total_tokens": 44882,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 42728,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. Follow the terminals and the direction of the red inverter.\n\nLet\n\n- $Q$ be the fed-back output node on the far left,\n- $x$ be the node **between the $CK$ switch and $\\mathrm{Inv}_1$**,\n- $y$ be the output of $\\mathrm{Inv}_1$.\n\nA keeper for $\\mathrm{Inv}_1$ would have to be a weak inverter connected directly **from $y$ back to $x$**, i.e. antiparallel to $\\mathrm{Inv}_1$. That is what makes the usual two-inverter cross-coupled latch.\n\nThe red inverter is not that. As drawn it goes\n\n$$\nQ \\;\\longrightarrow\\; y ,\n$$\n\nin the **same direction** as $\\mathrm{Inv}_1$, in parallel with the series path $CK$-switch + $\\mathrm{Inv}_1$. It is not connected to node $x$ at all.\n\nThat matters precisely in the phase where a keeper would be needed:\n\n- When $CK$ is off, $x$ is floating and can leak. But then the $CK$ switch is open, so the red inverter is disconnected from $x$. It cannot supply the leakage current to $x$, and it cannot hold $x$.\n- The input node of the right-hand inverter is likewise still a dynamic/floating node in the other clock phase.\n\nSo the circuit remains dynamic; the minimum-clock-frequency / maximum-hold-time problem is not removed.\n\nWhat the red inverter actually does is provide an **unclocked bypass inverter from the fed-back output $Q$ to the inter-latch node $y$**:\n\n- During $CK$ on, $\\overline{CK}$ off: $x=Q$, so $\\mathrm{Inv}_1$ already produces $y=\\overline Q$. The red inverter merely drives the same node with the same value, in parallel.\n- During $CK$ off, $\\overline{CK}$ on: $x$ should retain $Q_{\\text{old}}$, so $\\mathrm{Inv}_1$ should keep $y=\\overline{Q_{\\text{old}}}$ while the slave changes $Q$ to $Q_{\\text{new}}=\\overline{Q_{\\text{old}}}$. But the red inverter now demands  \n  $$y=\\overline{Q_{\\text{new}}}=Q_{\\text{old}},$$  \n  i.e. the opposite of what $\\mathrm{Inv}_1$ is trying to hold. Through the $\\overline{CK}$ switch and the two right-hand inverters it also forms an odd three-inverter path $y\\to Q\\to y$, not a bistable two-inverter latch.\n\nSo at best, if the red device is made very weak, it is just fought and overpowered by $\\mathrm{Inv}_1$ during the second half-cycle, adding contention and static power. If it is comparable in strength to $\\mathrm{Inv}_1$, node $y$ has no clean logic level and the toggle operation can fail. Either way, it is not a keeper for $\\mathrm{Inv}_1$ and it does not make the divider static.",
        "format": "markdown",
        "sha256": "0f88e98f912984c1f9808afbb033ce3b65d7579e4a1b4d26597eae38ced1beda"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter as an unclocked feedforward path from Q to Inv1’s output. However, it omits the key frequency tradeoff: the branch can speed high-rate operation but its loop can dominate at low rates and raise the minimum usable clock frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1269,
        "output_tokens": 46970,
        "total_tokens": 48239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1269,
        "output_tokens": 46970,
        "total_tokens": 48239,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 46119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No. The red inverter is not even connected as a keeper for $\\text{Inv}_1$.\n\nCall the nodes\n\n- $a$: the left-hand feedback node, output of the last inverter,\n- $b$: output of $\\text{Inv}_1$,\n- $p$: the actual input of $\\text{Inv}_1$, to the right of the $CK$ switch.\n\nA keeper around $\\text{Inv}_1$ would feed $b$ back to $p$. The red inverter instead connects $a\\rightarrow b$.\n\n- When $CK$ is closed, $p=a$, so the red inverter is merely **in parallel** with $\\text{Inv}_1$, not cross-coupled with it.\n- When $CK$ is open, $p$ is the floating dynamic node that would need keeping, but the open switch disconnects it from the red inverter.\n\nMoreover, the input node of the inverter following $\\overline{CK}$ is also dynamic and has no keeper at all. So the circuit remains a dynamic divider: leakage on those stored gate charges still imposes a minimum clock frequency. It cannot simply stop the clock and retain state.\n\n### Its real purpose: prevent hang-up / guarantee toggling\n\nThe basic circuit is two alternating dynamic sampling stages in an inverting feedback loop, i.e. a divide-by-2. It has an undesirable start-up condition in which $a$ and $b$ come up in phase — in circuit terms the internal nodes can sit near the inverter trip point, $\\approx V_{DD}/2$. In either clock phase the loop is then open, so that level is merely copied from one dynamic node to the other; there is no regeneration to develop a rail-to-rail divided waveform.\n\nThe red inverter solves that by directly enforcing\n\n$$\nb=\\bar a\n$$\n\nindependently of the charge that happens to be stored on $p$. Thus the stage sampled by $\\overline{CK}$ is always presented with the complement of the feedback/output node, so its transfer necessarily writes the opposite state back to $a$. During the $\\overline{CK}$ phase it also closes a regenerative three-inverter path with the two right-hand inverters, pulling the circuit out of the in-phase/trip-point condition.\n\nSo the red device is an **anti-hang-up / self-starting functional inverter in the divider path**, not a keeper that makes $\\text{Inv}_1$ static.",
        "format": "markdown",
        "sha256": "d77dcf0166417107b6926aacab0dfff3bf59841175d6feec070c4104e26b4d63"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies the red inverter’s a-to-b connection and a possible regenerative loop. However, it misstates the branch’s role as guaranteeing self-starting/toggling and misses the key tradeoff: it bypasses part of the latch path to help at high speeds, but can overpower the intended dynamic behavior at low clock rates and raise the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1269,
        "output_tokens": 37471,
        "total_tokens": 38740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1269,
        "output_tokens": 37471,
        "total_tokens": 38740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The transistors can be combined into one equivalent device\n\n$$\nG_m=g_{m1}+g_{m2},\\qquad \nr_o=r_{o1}\\parallel r_{o2},\\qquad \n\\bar\\gamma=\\frac{\\gamma_1g_{m1}+\\gamma_2g_{m2}}{g_{m1}+g_{m2}}\\; .\n$$\n\n$M_1$ and $M_2$ carry the same bias current, i.e. the\ninverter re-uses the current.\n\n### Input resistance\n\nNeglecting $C_{gs},C_{gd}$ for the moment, nodal analysis gives\n\n$$\nA_v\\equiv\\frac{V_{out}}{V_{in}}=\n\\frac{(1-G_mR_F)r_o}{R_F+r_o},\n\\qquad \nR_{in}= \\frac{R_F+r_o}{1+G_m r_o}\\; .\n$$\n\nFor $G_m r_o\\gg 1$\n\n$$\nR_{in}\\;\\approx\\;\\frac1{G_m}\\Bigl(1+\\frac{R_F}{r_o}\\Bigr) .\n$$\n\nImposing the power match $R_{in}=R_S=50\\;\\Omega$,\n\n$$\n\\,R_F = R_S\\bigl(1+G_m r_o\\bigr)-r_o\n      \\;\\approx\\;R_S\\,G_m r_o\\;\\qquad (G_mr_o\\gg1;\\; r_o\\gg R_S)\n$$\n\ni.e. $R_F$ and $G_m r_o$ cannot be chosen independently.\nIncreasing $R_F$ alone raises $R_{in}$ above $50\\;\\Omega$;\nincreasing $G_m$ alone lowers $R_{in}$ below $50\\;\\Omega$.\nThe matched voltage gain is then\n\n$$\n\\frac{V_{out}}{V_s}\\approx\n-\\,\\frac12\\Bigl(G_m r_o-\\frac{r_o}{R_S}\\Bigr)\n\\approx -\\frac{G_m r_o}{2}\\approx -\\frac{R_F}{2R_S}\\; .\n$$\n\n### Noise factor\n\nWith thermal noise of $R_F$ and channel noise\n$4kT(\\gamma_1g_{m1}+\\gamma_2g_{m2})$ of $M_{1,2}$,\nreferred to a source $R_S$,\n\n$$\nF = 1+\n\\frac{\\displaystyle\n\\frac{(G_m+1/R_S)^2}{R_F}\n+\\bar\\gamma G_m\\,(1/R_S+1/R_F)^2}\n{\\displaystyle (G_m-1/R_F)^2/R_S}\\; .\n$$\n\nFor the usual design regime $R_F\\gg R_S$, $G_mR_F\\gg1$,\n\n$$\n\\,F\\;\\approx\\;\n1+\\underbrace{\\Bigl(1+\\frac{1}{G_mR_S}\\Bigr)^{2}\\frac{R_S}{R_F}}_{\\text{noise of }R_F}\n\\;+\\;\n\\underbrace{\\frac{\\bar\\gamma}{G_mR_S}}_{\\text{noise of }M_{1,2}}\\,  .\n$$\n\nNow eliminate $R_F$ with the match condition,\n$R_S/R_F\\approx 1/\\big[\\,1+G_mr_o-r_o/R_S\\,\\big]$:\n\n$$\nF\\;\\approx\\;1+\n\\frac{\\bigl(1+1/G_mR_S\\bigr)^2}\n     {\\,1+G_mr_o-r_o/R_S\\,}\n+\\frac{\\bar\\gamma}{G_mR_S}\\; .\n$$\n\nBoth excess terms decrease monotonically when\n\n* $G_mR_S$ is made large — the transistor term $\\bar\\gamma/G_mR_S$ falls,\n  and the factor $(1+1/G_mR_S)^2\\to1$;\n* $G_m r_o$ is made large — because the match then *allows* a large\n  $R_F\\approx R_S G_m r_o$, whose noise $R_S/R_F\\approx 1/G_mr_o$ falls.\n\nIn the ideal thermal-noise model there is therefore no interior\noptimum: $F\\to 1+1/G_mr_o$ as $G_mR_S\\to\\infty$. The optimum is on the\nboundary set by power, bandwidth and device capacitance.\n\n### Practical optimisation\n\n1. **Move along the $R_{in}=50\\;\\Omega$ curve:** increase $R_F$ and\n   $G_m$ (and $r_o$) together, always $R_F\\approx R_S(1+G_mr_o)-r_o$.\n   A small $R_F$ chosen to obtain the match with a small $G_m$ is the\n   worst choice: $R_F$ noise dominates and the gain is low.\n\n2. **Maximise $G_m$ per unit current.** Use the current reuse:\n   size $M_1,M_2$ so the self-bias point (set by $R_F$) is\n   $V_M\\approx V_{DD}/2$, both devices saturated, $g_{m1}\\approx g_{m2}$\n   [$(W/L)_p/(W/L)_n\\approx \\mu_n/\\mu_p$ for equal $L$].\n   Bias at low $V_{ov}$ (moderate inversion) for high $g_m/I_D$.\n\n3. **Maximise the intrinsic gain $G_m r_o$.** This sets the noise\n   floor $1+1/G_mr_o$ and the largest usable $R_F$. Use $L$ somewhat\n   above $L_{\\min }$ (higher $r_o$, $\\bar\\gamma$ closer to $2/3$) as\n   long as $f_T\\gg f_0$; a cascode would help but is not in the circuit.\n\n4. **Take the largest $R_F$ the specifications allow.**\n   $R_F$ sets the matched gain $\\approx R_F/2R_S$. The limit is\n   closed-loop bandwidth — output pole $\\approx\n   [2\\pi(r_o\\parallel(R_F+R_S))C_L]^{-1}$, input Miller pole —\n   output swing/linearity and settling, not noise.\n\n5. **Scale $W$ and $I_D$ (power) up last.** Larger $G_m$ costs current\n   and $C_{in}\\approx C_{gs1}+C_{gs2}+(1+|A_v|)C_{gd}$.\n   Stop when $\\omega_0R_SC_{in}$ and the induced gate noise\n   ($\\propto (f_0/f_T)^2$) begin to raise $F$ at $f_0$, or the power\n   budget is reached. $C_1$ is just a blocking cap: $1/\\omega_0C_1\\ll R_S$.\n\nIn short: do not match with $R_F$ alone or with $1/G_m$ alone.\nRaise the loop gain $G_m r_o$, which lets you raise $R_F$ while\nkeeping $R_{in}=(R_F+r_o)/(1+G_mr_o)=50\\;\\Omega$; then $R_F$ noise\n$\\propto R_S/R_F$ and transistor noise $\\propto \\bar\\gamma/G_mR_S$\nboth fall, until power, $C_{in}/f_T$ and bandwidth stop the scaling.",
        "format": "markdown",
        "sha256": "b83f69559cb6c6b00cff2134038ca77d7372d8e76b7acd5cb89c29d23ba92ad0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly includes finite output resistance in the 50 Ω match, then raises gm and adjusts RF to preserve the match so transistor and feedback-resistor noise can fall below the 1+γ limit. Minor asymptotic imprecision does not change the essential conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2673,
        "output_tokens": 18418,
        "total_tokens": 21091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2673,
        "output_tokens": 18418,
        "total_tokens": 21091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The $M_{1}-M_{2}$ pair is a current re-use common source\nstage with shunt-shunt feedback.  Put\n\n$$g_{m}=g_{m1}+g_{m2}\\qquad \nr_{o}=r_{o1}\\parallel r_{o2}\\qquad A_{0}=g_{m}r_{o}$$\n\n$R_{F}$ also self biases the inverter.  To first order,\n$r_{o}$ finite,\n\n$$\\frac{v_{o}}{v_{i}}\\approx -g_{m}\\,(r_{o}\\!\\parallel\\! R_{F}) $$\n\n$$ R_{in}= \\frac{R_{F}+r_{o}}{1+g_{m}r_{o}}\n      \\approx \\frac1{g_{m}}+\\frac{R_{F}}{g_{m}r_{o}}\\tag{1} $$\ni.e. in the limit $r_{o}\\!\\gg\\! R_{F}$, $R_{in}\\approx1/g_{m}$.\n$R_{in}=R_{S}=50\\;\\Omega$ does not fix $R_{F}$ and $g_{m}$\nseparately, it fixes the combination in (1),\n\n$$\\,R_{F}=R_{S}(1+g_{m}r_{o})-r_{o}\\,\\tag{2}$$\n\nThe noise sources are $4kT/R_{F}$ for $R_{F}$ and\n$4kT\\gamma_{1,2}g_{m1,2}$ for $M_{1,2}$.  Referred to the\nsource, with $g_{m}R_{F}\\gg1$, $g_{m}r_{o}\\gg1$,\n\n$$ \n\\begin{aligned}\nF&\\approx \n1+\n\\underbrace{\\frac{R_{S}}{R_{F}}\n\\Bigl(1+\\frac{1}{g_{m}R_{S}}\\Bigr)^{2}}_{R_{F}}+\n\\underbrace{\\;\n\\bar\\gamma\\,\\frac{1}{g_{m}R_{S}}\n\\Bigl(1+\\frac{R_{S}}{R_{F}}\\Bigr)^{2}}_{M_{1},M_{2}}  \\\\\n\\bar\\gamma&=\\frac{\\gamma_{1}g_{m1}+\\gamma_{2}g_{m2}}\n                 {g_{m1}+g_{m2}}\n\\end{aligned}\\tag{3}\n$$\n\nFor $R_{F}\\!\\gg\\! R_{S}$ and $g_{m}R_{S}\\gtrsim1$ this is\n\n$$F\\;\\approx\\;1+\\frac{R_{S}}{R_{F}}+\\frac{\\bar\\gamma}{g_{m}R_{S}}\\;  $$\n\nBoth excess terms decrease with $R_{F}$ and with $g_{m}$.\nHence, with (2) imposed, $F$ is decreased monotonically\nby increasing the loop gain $g_{m}r_{o}$, i.e. by increasing\n$R_{F}$ and $g_{m}$ together so that (1) stays $50\\;\\Omega$.\nIn the usual textbook limit $R_{in}\\approx1/g_{m}$,\n$g_{m}=1/R_{S}=20\\,{\\rm mS}$ is pinned and (3) tends to\n$F\\to1+\\bar\\gamma$ for $R_{F}\\to\\infty$.\n\nIn practice:\n\n* Use the current reuse fully. For a given $I_{D}$ both\ndevices give transconductance. Size for\n$g_{m1}\\approx g_{m2}$, i.e. $(W/L)_{2}/(W/L)_{1}\\approx\n\\mu_{n}/\\mu_{p}$, $V_{ov1}\\approx V_{ov2}$, output bias\n$\\approx V_{DD}/2$. Then $\\bar\\gamma\\approx(\\gamma_{1}+\n\\gamma_{2})/2$, at minimum $I_{D}$ - i.e. at the largest\n$g_{m}/I_{D}$ compatible with $f_{T}\\gg f_{0}$.  Allocating\nmore $g_{m}$ to the lower-$\\gamma$ device lowers\n$\\bar\\gamma$ in (3).\n\n* Make $r_{o}$, hence $A_{0}=g_{m}r_{o}$, as large as the\nbandwidth allows, e.g. $L$ a few times $L_{\\min }$.\nA large $A_{0}$ is what allows a large $R_{F}$ in (2)\nwhile keeping $R_{in}=50\\;\\Omega$.\n\n* Choose $R_{F}$ from the match, eq. (2), not independently.\nIncreasing the intended $R_{F}$ must be accompanied by the\nincrease in $g_{m}r_{o}$ in (2).  A useful target is\n$R_{F}=(5\\!-\\!10)R_{S}$ and $g_{m}R_{S}=2\\!-\\!5$, so that\n$R_{S}/R_{F}\\ll\\bar\\gamma/g_{m}R_{S}\\ll1$ in (3).\n\nThe increase in $R_{F}$ - and in $g_{m}(r_{o}\\parallel R_{F})$ -\nis stopped in a real design by the required gain,\nthe output pole $(r_{o}\\parallel R_{F})C_{L}$, the input\nMiller capacitance, power, and by loss of feedback, i.e.\nlinearity.  Up to those limits, larger $R_{F}$ with\nproportionally larger loop gain, at fixed $R_{in}=50\\;\\Omega$,\nis the NF optimum.",
        "format": "markdown",
        "sha256": "9ce593983d9dcc239f190d37cbf900c63bf664f17911d0af6babb46e401ad49a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Uses the finite-output-resistance input-match relation and explains that increasing gm above 1/Rs while adjusting RF to keep Rin at 50 Ω lets NF fall below 1 + γ. This matches the essential optimization in the golden solution.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2673,
        "output_tokens": 30879,
        "total_tokens": 33552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2662,
        "input_tokens": 2673,
        "output_tokens": 30879,
        "total_tokens": 33552,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 29494,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is a self-biased inverter with shunt-shunt feedback. $C_1$\nis an ac short. Put\n\n$$\nG_m=g_{m1}+g_{m2},\\qquad \nr_o=r_{o1}\\parallel r_{o2},\\qquad \n\\bar i_{nd}^{2}=4kT(\\gamma_n g_{m1}+\\gamma_p g_{m2})\\Delta f\n      =4kT\\gamma_{\\rm eff}G_m\\Delta f\n$$\n$$\n\\gamma_{\\rm eff}=\\frac{\\gamma_n g_{m1}+\\gamma_p g_{m2}}{g_{m1}+g_{m2}} .\n$$\n\nBoth devices carry the same $I_D$; the inverter is a current-reuse\nstage, $G_m$ being obtained for roughly half the current of a\nsingle device.\n\n### Input resistance and gain\n\nApplying a test voltage at the gate node,\n\n$$\n\\,R_{in}=\\frac{R_F+r_o}{1+G_m r_o}\\approx \\frac1{G_m}+\\frac{R_F}{G_mr_o}\\,\\qquad (1)\n$$\n\n$$\nA_v\\equiv\\frac{v_{out}}{v_g}=-\n\\bigl(G_m-1/R_F\\bigr)(r_o\\parallel R_F)\\approx -G_mr_o\n\\qquad G_mR_F\\gg1,\\;R_F\\gg r_o\n$$\n\nAt match $v_g=v_s/2$, so the source-to-output gain is $\\approx A_v/2$.\nFrom (1), $R_{in}=R_S=50\\;\\Omega$ fixes $R_F$ once $G_m$ and $r_o$\nare chosen:\n\n$$\n\\,R_F=R_S(1+G_mr_o)-r_o\\, \\qquad (2)\n$$\n\n$R_F$ alone does not fix $R_{in}$.\n\n### Noise factor\n\nThe uncorrelated sources are $R_S$, $R_F$ and the two channel-noise\ncurrents. Referring their output noise to the noise of $R_S$ at the\noutput gives, exactly to first order in $r_o$,\n\n$$\n\\begin{aligned}\nF=1&+\\frac{R_F}{R_S}\\,\n      \\frac{(1+G_mR_S)^2}{(G_mR_F-1)^2}\n     +\\frac{\\gamma_{\\rm eff}G_m}{R_S}\n      \\left[\\frac{R_S+R_F}{G_mR_F-1}\\right]^2 \\\\[2mm]\n\\approx 1&+\n\\underbrace{\\frac{R_S}{R_F}\\Bigl(1+\\frac1{G_mR_S}\\Bigr)^2}_{\\text{feedback resistor}}\n\\;+\\;\n\\underbrace{\\frac{\\gamma_{\\rm eff}}{G_mR_S}\n      \\Bigl(1+\\frac{R_S}{R_F}\\Bigr)^2}_{\\text{$M_1,M_2$}}\n\\qquad G_mR_F\\gg1 .\n\\end{aligned}\n\\tag{3}\n$$\n\nIn the useful regime $G_mR_S\\gg1$, $R_F\\gg R_S$,\n\n$$\n\\,F\\;\\approx\\;1+\\frac{R_S}{R_F}+\\frac{\\gamma_{\\rm eff}}{G_mR_S}\\,\\qquad \nNF=10\\log_{10}F \\tag{4}\n$$\n\n### What the $50\\;\\Omega$ constraint does\n\nEquation (4) says $F$ falls if $R_F$ is increased and if $G_m$ is\nincreased.  But (1)-(2) forbid increasing either one alone: raising\n$R_F$ alone raises $R_{in}$ above $50\\;\\Omega$; raising $G_m$ alone\nlowers $R_{in}$ below $50\\;\\Omega$.  They must be raised together,\nkeeping (2) satisfied.  Indeed, for $G_mR_S\\gg1$, (2) gives\n$R_F/R_S\\approx G_mr_o$, so (4) becomes approximately\n\n$$\nF-1\\;\\approx\\;\\frac{1}{G_mr_o}+\\frac{\\gamma_{\\rm eff}}{G_mR_S}\\; .\n\\tag{5}\n$$\n\nIn the ideal $g_m,r_o$ model there is no interior minimum: $NF$\ndecreases monotonically with the loop gain.  The design problem is\ntherefore to maximise $G_mR_S$ and the intrinsic gain $G_mr_o$\nsubject to the power, bandwidth, headroom and linearity budget,\nand then set $R_F$ from (2).  In practice:\n\n1. **Maximise $G_m$ per unit current.** Keep $V_{ov1},V_{ov2}$ low,\n   typically $150$--$200\\,{\\rm mV}$, and scale $W$ and $I_D$ together\n   so $V_{ov}$ and $G_mr_o$ stay high while $G_m$ grows. Size $M_2$\n   wider than $M_1$ by $\\approx\\mu_n/\\mu_p$ so $g_{m1}\\approx g_{m2}$,\n   the trip point is near $V_{DD}/2$, and $\\gamma_{\\rm eff}\\approx\n   (\\gamma_n+\\gamma_p)/2$.  A device made to carry most of $G_m$ with\n   the smaller $\\gamma$ helps only marginally and usually destroys\n   $r_o$ and symmetry.\n\n2. **Maximise $r_o$ for that $G_m$.** Long enough channels / low\n   $V_{ov}$ raise $G_mr_o$, which by (2) permits a large $R_F$ and\n   makes the $R_F$ term in (5), $\\approx1/G_mr_o$, small. Channel\n   length is stopped by the output pole $1/r_oC_L$ and by $f_T$.\n\n3. **Set $R_F$ from the match, Eq. (2),** not from the gain: with\n   $R_F\\gg r_o$ the gain has already saturated at $\\approx-G_mr_o$.\n\n4. **Stop scaling when a practical limit is hit.** Scaling $W,I_D$\n   at fixed $V_{ov}$ raises $C_{gs1}+C_{gs2}+(1+|A_v|)(C_{gd1}+C_{gd2})$\n   in proportion to $G_m$; the input pole $\\approx\n   [(R_S\\parallel R_{in})C_{in}]^{-1}$, the output pole, power and\n   output swing/IIP3 then set the largest usable $G_m$.  Beyond the\n   point where, from (4), $\\gamma_{\\rm eff}/G_mR_S\\approx R_S/R_F$,\n   one source dominates and further improvement is very slow.\n\nExample of the trend: $G_mR_S=5$, $G_mr_o=20$ gives $R_F\\approx850\\;\\Omega$\nfrom (2) and $F\\approx1+0.06+0.19$, i.e. of order $1\\,{\\rm dB}$ before\ncapacitive, induced-gate and loss effects are included.\n\nIn short: do not optimise $R_F$ in isolation. Increase $G_m$ (and\n$G_mr_o$) as far as power/bandwidth allow, increase $R_F$\nconcomitantly to keep $R_{in}=(R_F+r_o)/(1+G_mr_o)=50\\;\\Omega$, with\n$g_{m1}\\approx g_{m2}$.  The attainable floor is set by Eq. (5).",
        "format": "markdown",
        "sha256": "594674c7be42bd8c492ce5748761592011913c79d742ace11db29433b2b47435"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly includes finite output resistance in the input-match relation, adjusts RF to keep Rin at 50 Ω, and explains that increasing gm can lower NF below 1 + γ. The practical optimization advice is consistent with the golden solution.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2673,
        "output_tokens": 23034,
        "total_tokens": 25707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21243,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2673,
        "output_tokens": 23034,
        "total_tokens": 25707,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21243,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the small signal model $V_{DD}$ and $V_{b}$ are ac ground\nand $I_{SS}$ is an ac open.  Let a test voltage $v_{p}$ be applied\nat $P$ and let $r_{o}\\to\\infty$.\n\nFor $M_{1}$\n$$\nv_{x}=-g_{m1}R_{D1}v_{p} .\n$$\n\n$M_{2}$-$M_{3}$ is a PMOS differential pair with tail node $v_{t}$.\nWith drain currents taken downward,\n$$\ni_{d2}=g_{m2}(v_{t}-v_{x}),\\qquad i_{d3}=g_{m3}v_{t},\n\\qquad i_{d2}+i_{d3}=0\n$$\nsince $I_{SS}$ is ac open.  Hence\n$$\nv_{t}=\\frac{g_{m2}}{g_{m2}+g_{m3}}v_{x},\\qquad \ni_{d3}= \\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,v_{x}\n      =-g_{m1}R_{D1}\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,v_{p}\n      \\equiv -K v_{p}.\n$$\nFor $g_{m2}=g_{m3}\\equiv g_{mP}$, $i_{d3}= \\tfrac12g_{mP}v_{x}$, i.e. the\nunloaded $X\\to V_{out}$ gain is $g_{mP}R_{D2}/2$.\n\nKCL at $P$, the gate of $M_{1}$ taking no current, and at the output,\nwith $i_{in}$ the test current,\n$$\ni_{in}=\\frac{v_{p}-v_{out}}{R_{F}},\\qquad \ni_{d3}= \\frac{v_{out}}{R_{D2}}+\\frac{v_{out}-v_{p}}{R_{F}} .\n$$\nEliminating $v_{out}$ and $i_{d3}=-Kv_{p}$ gives\n$$\n-\\,K=\\frac1{R_{D2}}-\\frac{R_{F}+R_{D2}}{R_{D2}R_{in}},\n\\qquad R_{in}\\equiv\\frac{v_{p}}{i_{in}},\n$$\ni.e.\n$$\n\\,R_{in}=\n\\frac{R_{F}+R_{D2}}\n     {\\,1+g_{m1}R_{D1}R_{D2}\\,\n      \\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}\\,  \\;\n$$\nin particular, for matched $M_{2},M_{3}$,\n$$\nR_{in}\\approx\n\\frac{R_{F}+R_{D2}}\n     {1+\\tfrac12\\,g_{m1}g_{mP}R_{D1}R_{D2}}\n\\;\\xrightarrow[\\text{large loop gain}]{}\\;\n\\frac{R_{F}}{\\tfrac12 g_{m1}g_{mP}R_{D1}R_{D2}}\\; .\n$$\nThe impedance seen by $I_{in}$ is this resistance in parallel with $C_{in}$,\n$Z_{in}=R_{in}\\parallel (sC_{in})^{-1}$.",
        "format": "markdown",
        "sha256": "774df8fcc067e7626491537d0fe9e7de0e53eb8ad1d0efd6b461d0dd10325bad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer gives the exact input resistance, retaining the output-side resistance: \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), with the matched-pair gain agreeing with the golden solution. The large-loop-gain approximation drops \\(R_{D2}\\) without stating an additional assumption, but the exact result is correct.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 219,
        "output_tokens": 21033,
        "total_tokens": 21252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 219,
        "output_tokens": 21033,
        "total_tokens": 21252,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20119,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "At low frequencies neglect all transistor capacitances except\n$C_{in}$.  $V_{DD}$ and $V_b$ are ac grounds and $I_{SS}$ is an ac\nopen.  Let $M_{2,3}$ be matched,\n$g_{m2}=g_{m3}\\equiv g_{mp}$, $r_{o2}=r_{o3}\\equiv r_{op}$, each\ncarrying $I_{SS}/2$.  All devices are in saturation.\n\nFor the first stage, with $V_P$ the (test) voltage at $P$,\n\n$$\nV_X=-g_{m1}\\bigl(R_{D1}\\parallel r_{o1}\\bigr)V_P\\tag{1}\n$$\n\nsince the gate of $M_2$ draws no current.\n\nLet $V_S$ be the common-source node of the $M_2$--$M_3$ pair.\nThe ac tail current is zero, so $i_{sd2}+i_{sd3}=0$, i.e.\n\n$$\n2\\!\\left(g_{mp}+\\frac1{r_{op}}\\right)V_S\n      =g_{mp}V_X+\\frac{V_{out}}{r_{op}} .\\tag{2}\n$$\n\nKCL at the output node, including the current in $R_F$, gives\n\n$$\n\\left(g_{mp}+\\frac1{r_{op}}\\right)V_S-\\frac{V_{out}}{r_{op}}\n   =\\frac{V_{out}}{R_{D2}}+\\frac{V_{out}-V_P}{R_F}. \\tag{3}\n$$\n\nEliminating $V_S$ from (2)--(3),\n\n$$\nV_{out}\\!\\left(\\frac{2}{R_{D2}}+\\frac{2}{R_F}+\\frac1{r_{op}}\\right)\n   =g_{mp}V_X+\\frac{2}{R_F}V_P .\n$$\n\nWith (1),\n\n$$\n\\frac{V_{out}}{V_P}=\n\\frac{-\\,g_{mp}g_{m1}(R_{D1}\\parallel r_{o1})+2/R_F}\n     {\\,2/R_{D2}+2/R_F+1/r_{op}\\,}. \\tag{4}\n$$\n\nThe (negative) forward gain is essentially\n$g_{m1}(R_{D1}\\!\\parallel\\! r_{o1})$ times\n$\\tfrac{g_{mp}}2\\,(R_{D2}\\parallel 2r_{op})$; the factor $1/2$ is the\nusual single-ended differential-pair factor.\n\nApply a test source at $P$.  The gate of $M_1$ draws no current,\nso the test current flows only in $R_F$:\n\n$$\nI_{test}=\\frac{V_P-V_{out}}{R_F},\n\\qquad\nR_{in}\\equiv\\frac{V_P}{I_{test}}=\\frac{R_F}{1-V_{out}/V_P}.\n$$\n\nUsing (4),\n\n$$\n\\,R_{in}=\nR_F\\,\n\\frac{\\;\\dfrac{2}{R_{D2}}+\\dfrac{2}{R_F}+\\dfrac1{r_{op}}\\;}\n     {\\;g_{m1}g_{mp}(R_{D1}\\parallel r_{o1})\n      +\\dfrac{2}{R_{D2}}+\\dfrac1{r_{op}}\\;}\\,\n$$\n\nin parallel with $C_{in}$ as seen by $I_{in}$.\n\nFor $r_o\\gg R_D$ this reduces to the familiar shunt-feedback result\n\n$$\nR_{in}\\;\\approx\\;\n\\frac{R_F+R_{D2}}\n     {\\,1+\\tfrac12\\,g_{m1}g_{mp}R_{D1}R_{D2}\\,}\n\\;\\approx\\;\n\\frac{R_F}{1+\\tfrac12 g_{m1}g_{mp}R_{D1}R_{D2}}\n\\;\\approx\\;\n\\frac{2R_F}{g_{m1}g_{mp}R_{D1}R_{D2}}\\quad\\text{(large loop gain),}\n$$\n\nso the impedance seen by the input source is\n$Z_{in}(s)=R_{in}\\parallel \\dfrac{1}{sC_{in}}\n=\\dfrac{R_{in}}{1+sR_{in}C_{in}}$.",
        "format": "markdown",
        "sha256": "437dd41e74dda880f95d79fb9da5f6343176586710c0166b7256975d9c888648"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer recovers the key result, Rin = (RF + RD2)/(1 + A0), with A0 = 1/2 gm1 gm2,3 RD1 RD2, and retains the output-side resistance before giving further approximations. The finite-ro and Cin discussion does not undermine the essential result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 219,
        "output_tokens": 14473,
        "total_tokens": 14692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 219,
        "output_tokens": 14473,
        "total_tokens": 14692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13379,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "$V_{b}$ is an a.c. ground and $I_{SS}$ is an a.c. open.\nNeglect channel length modulation. $M_{2}$-$M_{3}$ is the\n$p$-channel pair whose (unused) $M_{2}$ drain is at a.c. ground,\nwith output taken at the drain of $M_{3}$.\n\nFor the first stage, with $v_{p}$ the small signal voltage at $P$,\n\n$$\nv_{x}=-g_{m1}R_{D1}v_{p} \\tag{1}\n$$\n\nLet $v_{S}$ be the common source node of $M_{2},M_{3}$.\nThe a.c. tail current is zero, so, in magnitudes,\n\n$$\ng_{m2}(v_{S}-v_{x})+g_{m3}v_{S}=0\n\\qquad\\Longrightarrow\\qquad \nv_{S}=\\frac{g_{m2}}{g_{m2}+g_{m3}}v_{x}.\n$$\n\nHence the a.c. drain current delivered by $M_{3}$ to the output node is\n\n$$\ni_{d3}=g_{m3}v_{S}\n      =\\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,v_{x}\n      =-g_{m1}R_{D1}\\,\n        \\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}\\,v_{p}. \\tag{2}\n$$\n\nPut\n\n$$\nA_{0}=g_{m1}R_{D1}R_{D2}\\,\n      \\frac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}>0, \n\\qquad\\text{so that}\\qquad \ni_{d3}= -\\,\\frac{A_{0}}{R_{D2}}v_{p},\n$$\n\ni.e. the (unloaded) core gain is $v_{out}/v_{p}=-A_{0}$.\nFor matched $M_{2},M_{3}$, $g_{m2}=g_{m3}\\equiv g_{mP}$,\nthe second stage gain is $g_{mP}R_{D2}/2$ and\n\n$$\nA_{0}= \\tfrac12\\,g_{m1}g_{mP}R_{D1}R_{D2}.\n$$\n\nKCL at the output node, including the current in $R_{F}$, and at\nthe input node ($M_{1}$ draws no gate current),\n\n$$\ni_{d3}= \\frac{v_{out}}{R_{D2}}+\\frac{v_{out}-v_{p}}{R_{F}},\\qquad\ni_{in}= \\frac{v_{p}-v_{out}}{R_{F}} .\n$$\n\nWith $v_{out}=v_{p}-i_{in}R_{F}$ and (2),\n\n$$\n-\\frac{A_{0}}{R_{D2}}v_{p}\n   =\\frac{v_{p}-i_{in}R_{F}}{R_{D2}}-i_{in},\n$$\n\ni.e.\n\n$$\ni_{in}\\,(R_{F}+R_{D2}) = v_{p}\\,(1+A_{0}).\n$$\n\nTherefore the resistance looking into node $P$ is\n\n$$\n\\,R_{in}=\\frac{v_{p}}{i_{in}}\n      =\\frac{R_{F}+R_{D2}}\n             {\\,1+g_{m1}R_{D1}R_{D2}\\,\n              \\dfrac{g_{m2}g_{m3}}{g_{m2}+g_{m3}}}\\,}\n$$\n\nand for matched $M_{2},M_{3}$\n\n$$\n\\,R_{in}= \n\\frac{R_{F}+R_{D2}}\n     {1+\\tfrac12 g_{m1}g_{mP}R_{D1}R_{D2}}\n\\;\\approx\\;\n\\frac{R_{F}}{1+\\tfrac12 g_{m1}g_{mP}R_{D1}R_{D2}}\n\\;\\approx\\;\n\\frac{2R_{F}}{g_{m1}g_{mP}R_{D1}R_{D2}}\\, \n$$\n\nfor $R_{F}\\gg R_{D2}$ and loop gain $\\gg1$.  \nThe impedance seen by $I_{in}$ is this $R_{in}$ in parallel with\n$C_{in}$, i.e. $Z_{in}=R_{in}\\big/\\big(1+sC_{in}R_{in}\\big)$.\nWith $\\lambda\\ne0$, $R_{D1}$ is replaced to first order by $R_{D1}\\!\\parallel\\! r_{o1}$ and $R_{D2}$ by the output resistance at $V_{out}$.",
        "format": "markdown",
        "sha256": "f67742e5d034c9f3595f9338ea5fced1d440d2f5a1f447f0c7dbb2a4854d39dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the exact input resistance, Rin = (RF + RD2)/(1 + A0), and correctly identifies the unloaded gain, including the matched-device form. The approximations and added capacitance discussion do not undermine the essential result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 219,
        "output_tokens": 17542,
        "total_tokens": 17761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 219,
        "output_tokens": 17542,
        "total_tokens": 17761,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16326,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The supply noise does not add directly to $X$ and $Y$.\nIt frequency-modulates the oscillator. This is supply\npushing.\n\nLet the noise actually present on the $V_{out}$ node be\n$v_n(t)$, with one-sided power spectral density\n\n$$\nS_{th}(f_m)\\qquad {\\rm V^{2}/Hz}\n$$\n\nat (Fourier) frequency $f_m$. A component of $v_n$ at $f_m$\nproduces phase noise at an offset $\\Delta f=f_m$ from the\ncarrier.\n\n### 1.  Supply-pushing gain\n\nDefine\n\n$$\nK_{\\rm push}\\triangleq \\frac{\\partial f_{osc}}{\\partial V_{out}}\n\\qquad {\\rm Hz/V},\n\\qquad\nK_{\\rm push,rad}=2\\pi K_{\\rm push}\\;\\;{\\rm rad/s/V}.\n$$\n\nIn the circuit the dominant mechanism is the varactor\nbias. Neglecting the dc drop in $L_1$,\n\n$$\nV_{X,dc}\\approx V_{Y,dc}\\approx V_{out},\n$$\n\nso $M_{v1},M_{v2}$ are biased at about $V_{out}-V_{cont}$.\nHence $V_{out}$ changes $C_v$, the tank capacitance and\n$f_{osc}$. With $C_{tot}=C_{bank}+C_v+C_{par}$ per side,\n\n$$\nf_{osc}\\approx \\frac{1}{2\\pi\\sqrt{L_1C_{tot}}},\\qquad\n\\frac{\\partial f_{osc}}{\\partial V_{out}}\n = -\\frac{f_{osc}}{2C_{tot}}\\,\n   \\frac{\\partial C_{tot}}{\\partial V_{out}}\n \\approx -\\frac{f_{osc}}{2C_{tot}}\\,\n   \\frac{dC_v}{d(V_{out}-V_{cont})}.\n$$\n\nIn particular, for the varactor part $K_{\\rm push}\\approx -K_{VCO}$,\nsince $C_v$ depends on $V_{out}-V_{cont}$. In practice\n$K_{\\rm push}$ is obtained at the operating band and $V_{cont}$\nfrom two PSS simulations, or measurements, with\n$V_{out}$ and $V_{out}+\\Delta V$:\n\n$$\nK_{\\rm push}=\\frac{\\Delta f_{osc}}{\\Delta V_{out}} .\n$$\n\nThis automatically includes $M_1,M_2$ parasitic and\nAM-to-PM effects. It is largest where $|dC_v/dV|$,\ni.e. $|K_{VCO}|$, is largest.\n\n### 2.  FM to phase noise\n\nInstantaneously\n\n$$\nf_{osc}(t)=f_0+K_{\\rm push}\\,v_n(t),\n\\qquad\n\\phi_{ex}(t)=2\\pi\\int K_{\\rm push}v_n(t)\\,dt .\n$$\n\nThus in the frequency domain the voltage-to-excess-phase\ntransfer function is an integrator,\n\n$$\n\\frac{\\Phi_{ex}(j2\\pi f_m)}{V_n(j2\\pi f_m)}\n   =\\frac{K_{\\rm push,rad}}{j2\\pi f_m}\n   =\\frac{K_{\\rm push}}{jf_m},\n$$\n\nso the (one-sided) excess-phase PSD, in ${\\rm rad^2/Hz}$, is\n\n$$\n\\,S_\\phi(\\Delta f)=\n\\left(\\frac{K_{\\rm push}}{\\Delta f}\\right)^{2}\nS_{th}(\\Delta f)\n=\n\\left(\\frac{K_{\\rm push,rad}}{2\\pi\\Delta f}\\right)^{2}\nS_{th}(\\Delta f)\\,  .\n$$\n\nThe conventional single-sideband phase noise, per sideband,\nis ${\\mathscr L}=S_\\phi/2$:\n\n$$\n\\,{\\mathscr L}_{\\rm supply}(\\Delta f)\n=\n\\frac12\\left(\\frac{K_{\\rm push}}{\\Delta f}\\right)^{2}\nS_{th}(\\Delta f)\\,\n$$\n\nor in dB,\n\n$$\n{\\mathscr L}_{\\rm supply}(\\Delta f)\\big|_{\\rm dBc/Hz}\n=\n10\\log_{10}\\!\\left[\n\\frac{S_{th}(\\Delta f)}{2}\n\\left(\\frac{K_{\\rm push}}{\\Delta f}\\right)^{2}\n\\right],\n\\qquad K_{\\rm push}\\ {\\rm in\\ Hz/V}.\n$$\n\nFor white LDO thermal noise $S_{th}$ is constant, so the\ninduced phase noise falls as $1/\\Delta f^{2}$, i.e.\n$-20\\,{\\rm dB/dec}$. It is added on a power basis to the\nintrinsic VCO phase noise.",
        "format": "markdown",
        "sha256": "f2f13472636406ba6e9fe63f42d6c6f424240e6765206752ad6117d338eb7afe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, relates the output-noise voltage to frequency deviation through Kpush = dfosc/dVout, and applies FM-to-phase conversion with the required 1/Δf² dependence and SSB factor. It also notes the direct varactor coupling and connection to KVCO, matching the essential design insight.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3592,
        "output_tokens": 7225,
        "total_tokens": 10817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3592,
        "output_tokens": 7225,
        "total_tokens": 10817,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6103,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The supply noise does not, to the first order, add\ndifferentially at $X-Y$. It frequency-modulates the oscillator.\nThe relevant gain is therefore the supply-pushing gain, and\nthe VCO can be treated as an FM modulator driven by the LDO noise.\n\n### 1.  Supply pushing in this VCO\n\nThe d-c voltages at $X$ and $Y$ are, neglecting the d-c drop\nin $L_{1}$,\n\n$$\nV_{X0}=V_{Y0}\\approx V_{out}.\n$$\n\nHence the bias voltage of the two varactors $M_{v1},M_{v2}$ is\n\n$$\nV_{\\rm tune}=V_{X0}-V_{cont}=V_{out}-V_{cont}.\n$$\n\nLet the LDO output be $V_{out0}+n(t)$, with one-sided voltage\nnoise density $S_{th}$ in ${\\rm V^{2}/Hz}$. Then $n(t)$ modulates\n$V_{\\rm tune}$ exactly as a noise on $V_{cont}$ would, but with\nopposite sign.\n\nWith, per side,\n\n$$\nf_{0}= \\frac{1}{2\\pi\\sqrt{L_{1}C_{tot}}},\\qquad\nC_{tot}=C_{bank}+C_{par}+C_{v}(V_{out}-V_{cont}),\n$$\n\n$$\nK_{push}\\equiv \\left.\\frac{\\partial f_{0}}{\\partial V_{out}}\\right|_{V_{cont}}\n   =-\\frac{f_{0}}{2C_{tot}}\n     \\left(\\frac{dC_{v}}{dV_{\\rm tune}}+\\frac{dC_{par}}{dV_{out}}\\right)\n     \\;\\;{\\rm Hz/V}.\n$$\n\nThe varactor term alone gives\n\n$$\nK_{push,var}= -\\frac{f_{0}}{2C_{tot}}\\frac{dC_{v}}{dV_{\\rm tune}}\n             =-K_{VCO},\n$$\n\nwhere $K_{VCO}=\\partial f_{0}/\\partial V_{cont}$ is the ordinary\ntuning gain at the operating band. In practice $K_{push}$ is best\nobtained from a d-c sweep, or a PSS simulation, of $f_{0}$ versus\n$V_{out}$ with $V_{cont}$ and $I_{VCO}$ fixed; that automatically\nincludes parasitic-capacitance and amplitude-dependent, i.e.\nAM-to-PM, pushing. Note that a larger capacitor-bank code raises\n$C_{tot}$, lowers $|K_{VCO}|$, and therefore lowers supply-induced\nphase noise.\n\n### 2.  FM conversion of white noise to phase noise\n\nFor small noise, linearise:\n\n$$\nf(t)\\approx f_{0}+K_{push}\\,n(t).\n$$\n\nThe excess phase is the integral of the excess frequency,\n\n$$\n\\phi(t)=2\\pi\\int K_{push}\\,n(t)\\,dt\n\\quad\\Longrightarrow\\quad\n\\frac{\\Phi(f_{m})}{N(f_{m})}=\\frac{K_{push}}{j f_{m}},\n$$\n\n$f_{m}$ being the offset from the carrier. Hence the frequency-noise\nand phase-noise densities are\n\n$$\nS_{f}(f_{m}) = K_{push}^{2} S_{th}\\;\\;{\\rm Hz^{2}/Hz},\n\\qquad\nS_{\\phi}(f_{m}) = \\frac{K_{push}^{2} S_{th}}{f_{m}^{2}}\\;\\;{\\rm rad^{2}/Hz}.\n$$\n\nThe single-sideband phase noise, $\\mathcal L = S_{\\phi}/2$ for\nsmall modulation, is therefore\n\n$$\n\\boxed{\\;\n\\mathcal L_{sup}(\\Delta f)\n   =\\frac{1}{2}\\left(\\frac{K_{push}}{\\Delta f}\\right)^{2} S_{th}\n   =\\frac{1}{2}\\left(\\frac{K_{push,\\omega}}{\\Delta\\omega}\\right)^{2} S_{th}\n\\;}\n$$\n\nper Hz, with $K_{push}$ in Hz/V and $K_{push,\\omega}=2\\pi K_{push}$\nin rad/s/V. Using $|K_{push}|\\approx |K_{VCO}|$ this is the familiar\ncontrol-line noise formula with $S_{th}$ in place of the control\nvoltage noise. In dBc/Hz,\n\n$$\n\\mathcal L_{sup}({\\rm dBc/Hz})\n =10\\log_{10}\\!\\left[\\frac{K_{push}^{2}S_{th}}{2\\,\\Delta f^{2}}\\right].\n$$\n\nWhite, i.e. thermal, LDO noise thus produces white frequency\nnoise and a $1/\\Delta f^{2}$, $-20\\,{\\rm dB/dec}$, phase-noise\nprofile. If $S_{th}(f_{m})$ is not flat, or a decoupling network\ngives a transfer $H_{m}(f_{m})$ from the LDO output to the varactor\nbias, replace $S_{th}\\to S_{th}(\\Delta f)\\,|H_{m}(\\Delta f)|^{2}$;\nan LDO $1/f$ component would give $1/\\Delta f^{3}$.\n\n### 3.  Total phase noise\n\nThe supply contribution is uncorrelated with the intrinsic VCO\nnoise, so powers add:\n\n$$\n\\mathcal L_{tot}(\\Delta f)=\n\\mathcal L_{int}(\\Delta f)+\\mathcal L_{sup}(\\Delta f)\n\\qquad\\text{(linear, not dB)}.\n$$\n\nIn a PLL this free-running supply contribution is further\nmultiplied by the PLL high-pass error transfer function,\n$|1/(1+L(j2\\pi\\Delta f))|^{2}$.",
        "format": "markdown",
        "sha256": "baf3c0c0956f1fc8439954ddf72fe5edb2f3cda4f9b74987cfca4ec5d8d7b44d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO noise through Kpush = df/dVout, and applies FM-to-phase conversion with 1/Δf² dependence. It also notes the direct varactor coupling, the relation to KVCO, and that reducing KVCO reduces this noise contribution. Any convention or secondary-modeling details do not affect the core answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3592,
        "output_tokens": 8457,
        "total_tokens": 12049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3592,
        "output_tokens": 8457,
        "total_tokens": 12049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The LDO noise does not add differentially to nodes $X$ and $Y$.\nIt is a common voltage\n\n$$V_{out}=V_{OUT0}+v_n(t),\\qquad \\overline{v_n^2}=S_{th}(f)\\;{\\rm V^2/Hz}$$\n\nwhich parametrically modulates the oscillation frequency. This is\nsupply pushing.\n\n### 1. Supply-pushing gain\n\nDefine, at fixed $V_{cont}$, fixed capacitor-bank code and fixed\n$I_{VCO}$,\n\n$$ K_{push}\\triangleq \\left.\\frac{\\partial f_0}{\\partial V_{out}}\\right|_{V_{cont}}\n\\qquad {\\rm Hz/V} $$\n\nor $K_{push,\\omega}=2\\pi K_{push}$ in rad/s/V.\nPer side,\n\n$$f_0=\\frac{1}{2\\pi\\sqrt{L_1C_X}},\\qquad \nC_X=C_{B}+\\bar C_v+\\!C_{db}+C_{par}$$\n\nwhere $\\bar C_v$ is the large-signal, cycle-averaged capacitance of\n$M_{v1},M_{v2}$. Since the dc level of $X,Y$ is essentially $V_{out}$,\nwhereas $V_{cont}$ and ground are fixed, $v_n$ changes the varactor\nbias $V_X-V_{cont}$ (and the drain-junction bias of $M_{1,2}$). Hence\n\n$$ \nK_{push}= -\\frac{f_0}{2C_X}\\,\n\\frac{\\partial C_X}{\\partial V_{out}}  .\n$$\n\nIn practice $K_{push}$ is obtained from the slope of a simulated or\nmeasured $f_0$ versus $V_{out}$ curve, because $\\bar C_v$ depends on\nbias and swing. If the varactor dominates, $C_v$ depends on\n$V_{out}-V_{cont}$, so $K_{push}\\approx -K_{cont}$, where\n$K_{cont}=\\partial f_0/\\partial V_{cont}$; it is largest where the\n$C$--$V$ slope is largest and where the switched bank is smallest.\n\n### 2. From supply noise to frequency noise to phase noise\n\nFor offset frequencies $f_m\\ll f_0$ the modulation is quasi-static:\n\n$$\\delta f(t)=K_{push}\\,v_n(t).$$\n\nTherefore the (one-sided) frequency-noise PSD is\n\n$$ S_{\\delta f}(f_m)=K_{push}^{2}\\,S_{th}(f_m)\\quad {\\rm Hz^2/Hz}. $$\n\nPhase is the integral of frequency,\n$\\dot\\phi = 2\\pi\\,\\delta f$, so in the frequency domain\n$\\Phi(f_m)=\\Delta F(f_m)/(jf_m)$, giving\n\n$$\\,S_{\\phi}(f_m)=\\frac{S_{\\delta f}(f_m)}{f_m^{2}}\n      =\\frac{K_{push}^{2}\\,S_{th}(f_m)}{f_m^{2}}\\quad{\\rm rad^2/Hz}\\,  $$\n\nThe single-sideband phase noise is $\\mathcal L=S_\\phi/2$:\n\n$$\\;\n\\mathcal L_{sup}(f_m)=\n10\\log_{10}\\!\\left[\\frac{K_{push}^{2}\\,S_{th}(f_m)}\n{2\\,f_m^{2}}\\right]\\ {\\rm dBc/Hz}\\;\n$$\n\nwith $K_{push}$ in Hz/V and $S_{th}$ in V$^2$/Hz. Equivalently, with\n$K_{push,\\omega}$ in rad/s/V,\n$\\mathcal L_{sup}=10\\log_{10}\\!\\big[K_{push,\\omega}^{2}S_{th}/\n\\big(2(2\\pi f_m)^2\\big)\\big]$.\n\nThus even white LDO thermal noise produces $1/f_m^{2}$,\n$-20$ dB/dec, phase noise; LDO $1/f$ noise would produce $1/f_m^{3}$.\nThe supply-induced term adds in power to the intrinsic VCO phase\nnoise (and, inside a PLL, is then high-pass filtered by the loop).\nIf $K_{push}$ varies with modulation frequency, replace\n$K_{push}^{2}S_{th}$ by $|H_{V_{out}\\!\\to\\delta f}(j2\\pi f_m)|^{2}S_{th}(f_m)$.",
        "format": "markdown",
        "sha256": "7055baac3cd6bdcf7e6b4b5e68add4054a7e723d29baa7478d8f48252881f87f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts LDO voltage-noise PSD through Kpush = df/dVout to frequency noise and then phase noise with the required 1/fm² dependence. It also captures the direct-varactor link between Kpush and KVCO; minor convention details are secondary.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3592,
        "output_tokens": 9253,
        "total_tokens": 12845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8116,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3592,
        "output_tokens": 9253,
        "total_tokens": 12845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8116,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The differential oscillation is, to first order, unchanged:\n$P$ is already a virtual ground for the differential $f_{0}$ signal.\n$C_{T}$ changes the common-mode, i.e. $2f_{0}$, behaviour at $P$,\nand it does so detrimentally.\n\nWithout $C_{T}$, $P$ is a high impedance node, the impedance of\n$I_{SS}$.  With a sizeable $C_{T}$\n\n$$\nZ_{P}(f_{0}),\\;Z_{P}(2f_{0})\\;\\approx\\; \\frac{1}{j\\omega C_{T}}\n$$\n\nis low and capacitive.\n\n* $M_{1}$ and $M_{2}$ are now source-grounded devices for ac.\n  When, say, $M_{1}$ is driven hard on and goes into the triode\n  region, it is a low resistance from the tank node $X$ to ac\n  ground through $C_{T}$.  Without $C_{T}$ that resistance\n  terminates in the high impedance tail source and does not load\n  the tank.  With $C_{T}$ the tank is cyclically shunted, the\n  loaded $R_{p}$ and $Q$ fall, and the swing for a given $I_{SS}$\n  falls.\n\n* The $2f_{0}$ voltage normally developed at $P$ aids the\n  commutation of the pair.  Shorting $P$ removes/phase-shifts it.\n  $M_{1}$ and $M_{2}$ remain simultaneously on for a larger\n  fraction of the period, i.e. for a larger fraction of the time\n  when the impulse sensitivity function is large.  Their channel\n  noise is therefore injected into the tank in full, increasing\n  the effective noise factor $F$ in Leeson's expression\n  $\\propto (F/P_{s})(f_{0}/Q\\Delta f)^{2}$.\n\n* A capacitive $Z_{P}(2f_{0})$ puts the common-mode $2f_{0}$\n  component at $X,Y$ in quadrature and makes the drain\n  waveforms asymmetric.  The ISF acquires a dc component, so\n  the $1/f$ noise of $M_{1},M_{2}$ is up-converted.  The\n  $1/f^{3}$ phase-noise corner rises as well.\n\n$C_{T}$ does shunt the high-frequency noise of $I_{SS}$ near\n$2f_{0}$, but it does not shunt its low-frequency noise, and\nthe increased contribution of the cross-coupled pair and the\nlowered tank $Q$ normally dominate.\n\nIn practice capacitance at $P$ is minimized.  Tail filtering\nis done by resonating the tail capacitance at $2f_{0}$ with a\nseries tail inductor, presenting a large, essentially real,\nimpedance at $2f_{0}$ to the pair, not an ac short.",
        "format": "markdown",
        "sha256": "40464ecee24bc9a0baf78e33b0399acb50a5b103d76252b5b95f98f3149063a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies flicker-noise upconversion, a valid degradation mechanism, but incorrectly concludes that CT is uniformly detrimental. It misses the class-C regime where peak tank currents can exceed ISS and reduce phase noise, making the effect nonmonotonic.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3726,
        "output_tokens": 13649,
        "total_tokens": 17375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3726,
        "output_tokens": 13649,
        "total_tokens": 17375,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12817,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "In the cross coupled pair $M_{1}-M_{2}$ the (parasitic)\ncapacitance at $P$ should be made as small as possible.\nAdding an explicit $C_{T}$ at $P$, counter to first intuition,\nmakes the phase noise worse, in particular the close in\n$1/f^{3}$ noise.\n\nWithout $C_{T}$ the (ideal) tail current is constant.\n$M_{1}$ and $M_{2}$ simply steer $I_{SS}$ from one side of\nthe tank to the other.  The on transistor carries\nessentially the constant current $I_{SS}$, its $V_{GS}$ is\nessentially constant, and $V_{P}$ follows the rectified\ngate voltage,\n\n$$ V_{P}\\approx V_{G,{\\rm on}}-V_{GS,{\\rm on}}\\qquad{\\rm at}\\;\\;2\\omega_{0} $$\n\nwith hard, symmetric, commutation.\n\nWith $C_{T}$ at $P$, $V_{P}$ can no longer follow.\nAt every commutation $C_{T}$ must be charged and\ndischarged through $M_{1},M_{2}$ and $L_{1},L_{2}$.\nHence\n\n* $I_{D1}+I_{D2}\\ne I_{SS}$; a large $2\\omega_{0}$ current\n$ \\approx C_{T}dV_{P}/dt$ flows in the pair and in the\ncommon mode path $L_{1}\\!\\parallel\\! L_{2}$ in addition to\n$I_{SS}$.  The pair no longer hard steers a constant\ncurrent, both devices conduct appreciably around the\nzero crossings, and the drain current and the tank\nvoltage get a pronounced rise/fall asymmetry in a\nperiod.\n\n* In ISF language the impulse sensitivity function\nacquires a larger rms value and, because of the\nrise/fall asymmetry, a non zero average value,\n$\\Gamma_{dc}\\ne0$.  White noise of $M_{1},M_{2}$ is\nconverted to $1/\\Delta\\omega^{2}$ phase noise with a\nlarger $\\Gamma_{rms}^{2}/q_{\\max }^{2}$, and, much more\nimportant, the $1/f$ noise of $M_{1},M_{2}$ and of\n$I_{SS}$ is now up-converted. The $1/f^{3}$ corner\nmoves out to much larger offsets.\n\n* A low impedance at $P$ at $2\\omega_{0}$ is in fact the\nwrong $2\\omega_{0}$ termination for the pair.  The\n$2\\omega_{0}$ common-mode current flows in the lossy\n$L_{1},L_{2}$ and mixes back to $\\omega_{0}$ through the\ndevice nonlinearity, AM to PM conversion.  Pulling the\ncommon mode resonance $L_{1}\\!\\parallel\\!L_{2}$ with\n$C_{T}$ down toward $\\omega_{0}$ aggravates this.\n\nThe $I_{SS}$ noise at $2\\omega_{0}\\pm\\Delta\\omega$ that\n$C_{T}$ does shunt is a second order benefit, and\n$C_{T}$ does nothing for the low frequency $I_{SS}$\nnoise that produces the $1/f^{3}$ noise.  It is easily\noutweighed by the increased conversion of the pair's\nown noise.\n\nIn practice $C_{P}$ is minimized.  If it is appreciable\nit is resonated out at $2\\omega_{0}$ with an inductor in\nseries with the tail, i.e. a high impedance is presented\nto the pair at $2\\omega_{0}$ - tail filtering - rather than\nthe low impedance of a $C_{T}$ to ground.",
        "format": "markdown",
        "sha256": "34167cae9549087fadd8bc3bfd1d8578420ce8b63b1aa0d45c990596de89e714"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies flicker-noise upconversion as a possible degradation, but concludes that adding CT worsens phase noise monotonically and misses the class-C improvement that makes the effect nonmonotonic.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3726,
        "output_tokens": 18480,
        "total_tokens": 22206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3726,
        "output_tokens": 18480,
        "total_tokens": 22206,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It gets worse, even though $C_T$ seems to bypass the\ntail source.\n\nNode $P$ is not a differential virtual ground.  In the ideal\noscillator\n\n$$I_{D1}+I_{D2}=I_{SS}={\\rm const}$$\n\nand $V_P$ rides up and down at $2\\omega_0$, following the\ncommon-mode component of $V_X,V_Y$.  The on transistor keeps\nan approximately constant $V_{GS}$, stays in saturation, and\nthe pair simply steers $I_{SS}$ from one side of the tank to\nthe other.\n\nA $C_T$ large enough to matter makes $P$ an ac ground,\n\n$$Z_P(2\\omega_0)=\\frac1{j2\\omega_0C_T}\\to 0\\;,$$\n\nwith several consequences.\n\n* $V_{GS1,2}$ now take the full gate swing.  $M_{1,2}$ no longer\nsteer a constant current; they draw large current pulses,\n$I_{D1}+I_{D2}\\ne I_{SS}$, supplied through $C_T$.\n* During a pulse the transistor whose drain is at its minimum\nis driven toward, and generally into, triode.  Its low\n$r_{DS}$ shunts the tank for part of the cycle, lowering the\nloaded tank $Q$ and clamping the amplitude, i.e. the circuit\nis pushed into the voltage-limited regime.\n* The large $g_m$ current pulses occur with a cyclostationary\nnoise current $4kT\\gamma g_m$.  More device noise is injected\ninto the tank, and at harmonics of $\\omega_0$ from which it\nfolds to $\\omega_0$, than in the current-steering case.  In\nISF language the effective impulse sensitivity of the pair,\nand the memory of a disturbance stored on $C_T$ from one\nswitching instant to the next, are increased, converting\ncommon-mode/amplitude disturbances into phase disturbances.\n\nHence the $1/\\Delta f^{2}$ phase noise of the $M_1$--$M_2$ pair\nincreases, and the up-converted flicker noise is not improved.\nIndeed the noise of $I_{SS}$ at low offset is not bypassed at\nall, since $|Z_{C_T}|\\to\\infty$ at $\\Delta\\omega$, and the small\nshunting of its $2\\omega_0$ white noise is more than offset by\nthe above.  $C_T$ with $L_1\\!\\parallel\\! L_2$ also forms a\ncommon-mode resonance, $\\;\\omega_{CM}\\!\\approx\\!1/\\sqrt{(L/2)C_T}$,\nwhich is particularly harmful if it approaches $2\\omega_0$.\n\nIn practice tail-node capacitance, parasitic or intentional,\nis minimized, or resonated out at $2\\omega_0$ with a series\ntail inductor.  A bypass capacitor for $I_{SS}$ belongs on the\ncurrent-source side of that inductor, not at $P$.",
        "format": "markdown",
        "sha256": "381bc773ba1bb7650fa0132118c30cba073219a134317ac7e4d2fc7d873b003f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer incorrectly concludes that adding CT always worsens phase noise and misses the class-C range where peak tank currents exceed ISS and phase noise can improve. It does identify relevant degradation mechanisms, including flicker-noise upconversion and triode operation, so it earns partial credit.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3726,
        "output_tokens": 16310,
        "total_tokens": 20036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3726,
        "output_tokens": 16310,
        "total_tokens": 20036,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15456,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is two identical $LC$ oscillators, mutually\ncoupled by the transistor pairs carrying $I_{1}$.  The inner\npair, carrying $I_{SS}$, is the ordinary cross-coupled negative\nresistance pair in each oscillator.  The outer pair in one\noscillator is driven by the output of the other oscillator.\nOne of the two coupling paths is crossed and the other is not,\nso that the non-trivial steady state is, with $V_{1}=X_{1}-Y_{1}$\nand $V_{2}=X_{2}-Y_{2}$,\n\n$$V_{2}\\approx \\pm jV_{1}\\qquad{\\rm i.e.\\;quadrature\\;locking} .$$\n\nLet $C_{T}$ be the total capacitance from one output node,\n$X$ or $Y$, to a-c ground - drain and gate capacitances,\nthe gate capacitance of a coupling device in the other core,\nwiring and any load - and let $R_{p}$ be the parallel loss of\none $L\\!-\\!C_{T}$ tank,\n$\\;\\omega_{0}^{2}LC_{T}=1$, $Q=R_{p}\\sqrt{C_{T}/L}$.\nFundamental-frequency KCL at the two tanks gives, with\n$G_{SS}$ and $G_{1}$ the describing-function conductances of\nthe $I_{SS}$ and $I_{1}$ pairs,\n\n$$\\Bigl[\\frac1{R_{p}}+j\\Bigl(\\omega C_{T}-\\frac1{\\omega L}\\Bigr)\n      -G_{SS}\\Bigr]V_{1}-G_{1}V_{2}=0$$\n$$\\Bigl[\\frac1{R_{p}}+j\\Bigl(\\omega C_{T}-\\frac1{\\omega L}\\Bigr)\n      -G_{SS}\\Bigr]V_{2}+G_{1}V_{1}=0$$\n\nwhence, in oscillation, $G_{SS}=1/R_{p}$ and\n\n$$\\;\\omega C_{T}-\\frac1{\\omega L}= \\pm G_{1}\\; $$\n\ni.e. the quadrature coupling current forces the tanks\nslightly off their bare resonance.  With\n$m_{c}=G_{1}/G_{SS}\\approx I_{1}/I_{SS}$ in the usual switched\noperation,\n\n$$\\omega_{\\rm osc}\\;\\approx\\;\n\\omega_{0}\\left(1\\pm\\frac{m_{c}}{2Q}\\right),\n\\qquad \n\\omega_{0}=\\frac{1}{\\sqrt{LC_{T}}}$$\n\nthe $+$ sign for $V_{2}$ leading $V_{1}$, the $-$ sign for\n$V_{2}$ lagging.  For ordinary $Q\\sim 5$--$10$ and\n$I_{1}\\lesssim I_{SS}$ the pull is only a few percent.  In\nround numbers the QVCO oscillates at the bare tank resonance,\n\n$$f_{\\rm osc}\\approx f_{0}=\\frac{1}{2\\pi\\sqrt{LC_{T}}}$$\n\nslightly above or below $f_{0}$ according to the direction of\nquadrature rotation.",
        "format": "markdown",
        "sha256": "747ecb5e6c288d81e670132a7945811f65b0e557f55e8b174dee2a2199814658"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the tank resonance and derives the coupling-induced shift, giving ωosc ≈ ω0(1 ± mc/(2Q)) with mc ≈ I1/ISS. It also captures the two possible quadrature modes above or below resonance.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1997,
        "output_tokens": 18216,
        "total_tokens": 20213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1997,
        "output_tokens": 18216,
        "total_tokens": 20213,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17374,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The top and the bottom halves are two identical $-g_{m}$ $LC$\ncores.  In each core the inner pair, tail $I_{SS}$, is the ordinary\ncross coupled pair.  The outer pair, tail $I_{1}$, is in parallel\nwith it, but its gates are driven from the other core.  It is a\nparallel coupled quadrature $VCO$.\n\nLet, single ended,\n\n* $L$ be the inductance from $X$ (or $Y$) to a-c ground,\n* $C$ be the total capacitance from $X$ (or $Y$) to a-c ground,\n  tank capacitance $+$ $C_{db}$ of the two devices on the node\n  $+$ $C_{g}$ of the devices whose gates terminate on the node, etc.,\n* $R_{p}$, $Q=R_{p}\\sqrt{C/L}$, be the parallel tank resistance and\n  $Q$ at\n$$\n\\omega_{0}=\\frac1{\\sqrt{LC}}\\qquad \nf_{0}=\\frac1{2\\pi\\sqrt{LC}} .\n$$\n\nPut\n$$\nX_{1}= {\\rm Re}\\,A_{1}e^{j\\omega t},\\qquad Y_{1}=-X_{1},\\qquad\nX_{2}= {\\rm Re}\\,A_{2}e^{j\\omega t},\\qquad Y_{2}=-X_{2}\n$$\nfor the differential oscillation.  KCL at e.g. $X_{1}$ and $X_{2}$,\nwith $g_{m}$ the (large signal, fundamental) transconductance of\nthe main pair and $g_{mc}$ that of the coupling pair, is\n\n$$\\begin{aligned}\n\\Bigl[G_{p}-g_{m}+j\\Bigl(\\omega C-\\frac1{\\omega L}\\Bigr)\\Bigr]A_{1}\n      -g_{mc}A_{2}&=0\\\\\ng_{mc}A_{1}+\n\\Bigl[G_{p}-g_{m}+j\\Bigl(\\omega C-\\frac1{\\omega L}\\Bigr)\\Bigr]A_{2}&=0\n\\end{aligned}$$\nthe sign change in the coupling term being the cross connection\nin one of the two coupling paths in the figure.  Hence, with\n$D=G_{p}-g_{m}+j(\\omega C-1/\\omega L)$,\n\n$$\nD^{2}+g_{mc}^{2}=0,\\qquad{\\rm i.e.}\\qquad D=\\pm jg_{mc},\n\\qquad \\frac{A_{2}}{A_{1}}=\\pm j .\n$$\n\n$A_{2}=\\pm jA_{1}$ is quadrature between the two cores.  The real\npart, $g_{m}=G_{p}=1/R_{p}$, is the ordinary amplitude condition;\nthe coupling current, being in quadrature with the voltage of\nits own core, contributes no negative resistance to first order.\nThe imaginary part must be supplied by a detuned tank,\n\n$$\n\\;\\omega C-\\frac1{\\omega L}= \\pm g_{mc}\\;\n$$\n\ni.e. the $QVCO$ does not oscillate exactly at $\\omega_{0}$.\nIn closed form, with $g_{mc}$ the effective coupling $g_{m}$,\n\n$$\n\\omega_{\\pm}= \\omega_{0}\n\\Bigl[\\sqrt{1+\\alpha^{2}}\\pm\\alpha\\Bigr],\\qquad \n\\alpha=\\frac{g_{mc}}{2\\omega_{0}C}\\;,\n$$\nthe two signs being the two quadrature modes, $X_{2}Y_{2}$ leading\nor lagging $X_{1}Y_{1}$ by $90^{\\circ}$.\n\nFor the usual high $Q$, hard switched, operation\n$g_{m,{\\rm eff}}=1/R_{p}$ and the fundamental coupling current is\nin the ratio $I_{1}/I_{SS}$ to the main current, so\n$g_{mc,{\\rm eff}}\\approx (I_{1}/I_{SS})R_{p}^{-1}$ and, linearising\n$\\;\\omega C-1/\\omega L\\approx2C(\\omega-\\omega_{0})$,\n\n$$\n\\;\\omega_{osc}\\;\\approx\\;\n\\omega_{0}\\pm\\frac{g_{mc,{\\rm eff}}}{2C}\n\\;\\approx\\;\n\\omega_{0}\\left[\\,1\\pm\\frac{1}{2Q}\\,\\frac{I_{1}}{I_{SS}}\\right]\\;\n$$\n\n$$\n\\,f_{osc}\\approx f_{0}\\left(1\\pm\\frac{I_{1}}{2QI_{SS}}\\right),\\qquad \n      f_{0}=\\frac{1}{2\\pi\\sqrt{LC}}\\,  .\n$$\n\nFor normal values $I_{1}\\lesssim I_{SS}$, $Q\\sim5\\!-\\!10$, the split\nis only a few percent.  To the accuracy usually required the\nquadrature oscillator therefore runs at the tank resonance\n$1/2\\pi\\sqrt{LC}$, the coupling merely detuning it by\n$\\pm (f_{0}/2Q)(I_{1}/I_{SS})$ according as it locks in the\n$+90^{\\circ}$ or the $-90^{\\circ}$ mode.",
        "format": "markdown",
        "sha256": "1f753fddbefa96a1c5ad60ee207eefcb201975404b3398bfbac08bed500a25de"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the tank resonance and derives the two quadrature modes with a coupling-induced shift. Its final estimate, Δω ≈ (I₁/Iₛₛ)ω₀/(2Q), matches the required form; the intermediate gₘc/(2C) expression is tied to the stated oscillation-amplitude condition.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1997,
        "output_tokens": 15059,
        "total_tokens": 17056,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1997,
        "output_tokens": 15059,
        "total_tokens": 17056,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "meta/muse-wonder",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The middle two devices in each half are the ordinary\ncross coupled pair.  The outer two devices are the coupling\npair.  One oscillator is coupled to the other with a sign\ninversion, the other without, so that the only equal-amplitude\nlocked solution is\n\n$$V_{X_{1}}-V_{Y_{1}}\\approx V\\cos \\omega t\\qquad \n  V_{X_{2}}-V_{Y_{2}}\\approx V\\cos \\!\\left(\\omega t\\pm {\\pi\\over 2}\\right) $$\n\ni.e. a parallel coupled quadrature LC VCO.\n\nLet, per side,\n\n* $L$ be the inductance to the a.c. ground $V_{DD}$,\n* $C$ be the total capacitance to a.c. ground at an $X$ or a $Y$\nnode, drains, gates, coil and load,\n* $R_{p}$ be the parallel tank loss at resonance,\n$Q=R_{p}\\sqrt{C/L}$.\n\nA single one of the tanks resonates at\n\n$$\\;\\omega_{T}\\approx {1\\over \\sqrt{LC}}\\qquad \n      f_{T}\\approx {1\\over 2\\pi\\sqrt{LC}}\\; $$\n\nin differential form $f_T=1/2\\pi\\sqrt{L_{d}C_{d}}$.\nThe coupling pair injects, in the current limited regime,\na fundamental current $\\propto I_{1}$ in quadrature with the\ntank voltage, the main pair a fundamental current $\\propto\nI_{SS}$ in phase with it.  The tank must therefore supply\nthe phase $\\tan^{-1}(I_{1}/I_{SS})$, i.e. it works slightly\noff resonance,\n\n$$\\omega C-{1\\over \\omega L}\\;\\approx\\;\\pm\\,{1\\over R_{p}}{I_{1}\\over I_{SS}} $$\n\nor, with $x=\\omega/\\omega_T$,\n\n$$x-{1\\over x}\\approx \\pm {1\\over Q}{I_{1}\\over I_{SS}},\\qquad\n  x\\approx 1\\pm {1\\over 2Q}{I_{1}\\over I_{SS}}\\;\\;.$$ \n\nThe $+$ and $-$ signs are the two quadrature sequences,\n$X_{2}$ leading or lagging $X_{1}$ by $90^{\\circ}$.  For\n$I_{1}/I_{SS}\\lesssim 1$ and $Q\\gg1$ the shift is a few percent,\nso to the usual accuracy the (common, locked) oscillation\nfrequency is the tank frequency $f_{osc}\\approx1/2\\pi\\sqrt{LC}$.",
        "format": "markdown",
        "sha256": "addc7eba472940d75c7e768a40fdacd596b57050d3d81b622a7356c9697af9ab"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift, with Δω/ωT ≈ ±(I1/ISS)/(2Q), and identifies the two possible quadrature modes.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1997,
        "output_tokens": 13148,
        "total_tokens": 15145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1997,
        "output_tokens": 13148,
        "total_tokens": 15145,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12398,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
