{
  "model_key": "nova_pro",
  "display_name": "Nova Pro",
  "provider": "amazon",
  "evaluation_model_ids": [],
  "thinking_effort": "default",
  "configuration_note": "Nova Pro answered the 50 tasks in three rollouts through OpenRouter's chat completions route (amazon/nova-pro-v1) without reasoning (the model has no reasoning setting). Requests set temperature to 0 and max_tokens to 5,120, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Nova Pro on 2026-11-10 ($0.80 input, $0.80 cached input, $3.20 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 12,
          "incorrect_count": 138,
          "partial_credit_count": 46,
          "zero_count": 92,
          "mean_score_0_to_4": 0.8666666666666667,
          "score_percent": 21.666666666666668,
          "score_distribution": {
            "0": 92,
            "1": 19,
            "2": 18,
            "3": 9,
            "4": 12
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 12,
          "incorrect_count": 138,
          "partial_credit_count": 46,
          "zero_count": 92,
          "mean_score_0_to_4": 0.8666666666666667,
          "score_percent": 21.666666666666668,
          "score_distribution": {
            "0": 92,
            "1": 19,
            "2": 18,
            "3": 9,
            "4": 12
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 8,
          "incorrect_count": 82,
          "partial_credit_count": 10,
          "zero_count": 72,
          "mean_score_0_to_4": 0.5333333333333333,
          "score_percent": 13.333333333333334,
          "score_distribution": {
            "0": 72,
            "1": 5,
            "2": 4,
            "3": 1,
            "4": 8
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 8,
          "incorrect_count": 82,
          "partial_credit_count": 10,
          "zero_count": 72,
          "mean_score_0_to_4": 0.5333333333333333,
          "score_percent": 13.333333333333334,
          "score_distribution": {
            "0": 72,
            "1": 5,
            "2": 4,
            "3": 1,
            "4": 8
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 4,
          "incorrect_count": 56,
          "partial_credit_count": 36,
          "zero_count": 20,
          "mean_score_0_to_4": 1.3666666666666667,
          "score_percent": 34.166666666666664,
          "score_distribution": {
            "0": 20,
            "1": 14,
            "2": 14,
            "3": 8,
            "4": 4
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 4,
          "incorrect_count": 56,
          "partial_credit_count": 36,
          "zero_count": 20,
          "mean_score_0_to_4": 1.3666666666666667,
          "score_percent": 34.166666666666664,
          "score_distribution": {
            "0": 20,
            "1": 14,
            "2": 14,
            "3": 8,
            "4": 4
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 5,
        "incorrect_count": 45,
        "partial_credit_count": 15,
        "zero_count": 30,
        "mean_score_0_to_4": 0.92,
        "score_percent": 23.0,
        "score_distribution": {
          "0": 30,
          "1": 6,
          "2": 7,
          "3": 2,
          "4": 5
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 3,
        "incorrect_count": 47,
        "partial_credit_count": 17,
        "zero_count": 30,
        "mean_score_0_to_4": 0.86,
        "score_percent": 21.5,
        "score_distribution": {
          "0": 30,
          "1": 7,
          "2": 6,
          "3": 4,
          "4": 3
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 4,
        "incorrect_count": 46,
        "partial_credit_count": 14,
        "zero_count": 32,
        "mean_score_0_to_4": 0.82,
        "score_percent": 20.5,
        "score_distribution": {
          "0": 32,
          "1": 6,
          "2": 5,
          "3": 3,
          "4": 4
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 0,
        "input_tokens": 272099,
        "output_tokens": 87325,
        "total_tokens": 359424
      },
      "known_totals": {
        "cached_input_tokens": 0,
        "input_tokens": 272099,
        "output_tokens": 87325,
        "total_tokens": 359424
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 3,
          "incorrect_count": 27,
          "partial_credit_count": 3,
          "zero_count": 24,
          "mean_score_0_to_4": 0.5666666666666667,
          "score_percent": 14.166666666666666,
          "score_distribution": {
            "0": 24,
            "1": 1,
            "2": 2,
            "4": 3
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 2,
          "incorrect_count": 28,
          "partial_credit_count": 5,
          "zero_count": 23,
          "mean_score_0_to_4": 0.5333333333333333,
          "score_percent": 13.333333333333334,
          "score_distribution": {
            "0": 23,
            "1": 3,
            "2": 1,
            "3": 1,
            "4": 2
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 3,
          "incorrect_count": 27,
          "partial_credit_count": 2,
          "zero_count": 25,
          "mean_score_0_to_4": 0.5,
          "score_percent": 12.5,
          "score_distribution": {
            "0": 25,
            "1": 1,
            "2": 1,
            "4": 3
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 2,
          "incorrect_count": 18,
          "partial_credit_count": 12,
          "zero_count": 6,
          "mean_score_0_to_4": 1.45,
          "score_percent": 36.25,
          "score_distribution": {
            "0": 6,
            "1": 5,
            "2": 5,
            "3": 2,
            "4": 2
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 12,
          "zero_count": 7,
          "mean_score_0_to_4": 1.35,
          "score_percent": 33.75,
          "score_distribution": {
            "0": 7,
            "1": 4,
            "2": 5,
            "3": 3,
            "4": 1
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 12,
          "zero_count": 7,
          "mean_score_0_to_4": 1.3,
          "score_percent": 32.5,
          "score_distribution": {
            "0": 7,
            "1": 5,
            "2": 4,
            "3": 3,
            "4": 1
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET, often denoted as \\( A_i \\), is a measure of how effectively the MOSFET can amplify a signal. It is primarily determined by the transconductance \\( g_m \\) and the output resistance \\( r_o \\) of the MOSFET. The intrinsic gain can be expressed as:\n\n\\[ A_i = g_m \\cdot r_o \\]\n\nWhere:\n- \\( g_m \\) is the transconductance, which is the change in drain current \\( I_D \\) for a given change in gate-source voltage \\( V_{GS} \\).\n- \\( r_o \\) is the output resistance, which is the resistance looking into the drain terminal with the gate held at a constant voltage.\n\nWhen you double the length \\( L \\) and width \\( W \\) of a MOSFET, several parameters change:\n\n1. **Transconductance \\( g_m \\)**:\n   - The transconductance \\( g_m \\) is proportional to the width \\( W \\) of the MOSFET and inversely proportional to the length \\( L \\). Specifically, \\( g_m \\) can be approximated as:\n     \\[ g_m \\propto \\frac{W}{L} \\]\n   - If both \\( W \\) and \\( L \\) are doubled, \\( g_m \\) remains unchanged because the ratio \\( \\frac{W}{L} \\) is constant.\n\n2. **Output Resistance \\( r_o \\)**:\n   - The output resistance \\( r_o \\) is approximately given by:\n     \\[ r_o \\propto \\frac{L}{W} \\cdot \\frac{1}{I_D} \\]\n   - If both \\( W \\) and \\( L \\) are doubled, \\( r_o \\) will also remain unchanged because the ratio \\( \\frac{L}{W} \\) is constant.\n\nSince both \\( g_m \\) and \\( r_o \\) remain unchanged when you double both the length and width of the MOSFET, the intrinsic gain \\( A_i \\), which is the product of \\( g_m \\) and \\( r_o \\), will also remain unchanged.\n\n\\[ A_i = g_m \\cdot r_o \\]\n\nTherefore, doubling both the length and width of a MOSFET does not change its intrinsic gain.",
        "format": "markdown",
        "sha256": "c83bb9a2288e07d7169d5f283a40a60784e70a5b7315cd103bda0d58a80fe7d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly gives intrinsic gain as gm·ro and notes gm is approximately unchanged, but incorrectly assumes ro is unchanged when both dimensions double. At constant overdrive, ID stays approximately constant while channel-length modulation decreases, so ro and intrinsic gain approximately double. The central conclusion is therefore wrong.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 492,
        "total_tokens": 510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 492,
        "total_tokens": 510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET, often denoted as \\( A_i \\), is given by the transconductance \\( g_m \\) divided by the output conductance \\( g_{ds} \\):\n\n\\[ A_i = \\frac{g_m}{g_{ds}} \\]\n\nLet's examine how doubling the length \\( L \\) and width \\( W \\) of a MOSFET affects these parameters.\n\n### Transconductance \\( g_m \\)\n\nThe transconductance \\( g_m \\) of a MOSFET is given by:\n\n\\[ g_m = \\frac{2I_D}{V_{GS} - V_{th}} \\]\n\nwhere \\( I_D \\) is the drain current, \\( V_{GS} \\) is the gate-to-source voltage, and \\( V_{th} \\) is the threshold voltage. \n\nHowever, \\( I_D \\) can also be expressed in terms of \\( W \\) and \\( L \\):\n\n\\[ I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 \\]\n\nwhere \\( \\mu_n \\) is the electron mobility, \\( C_{ox} \\) is the oxide capacitance per unit area.\n\nTherefore,\n\n\\[ g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th}) \\]\n\nDoubling both \\( W \\) and \\( L \\):\n\n\\[ g_m' = \\mu_n C_{ox} \\frac{2W}{2L} (V_{GS} - V_{th}) = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th}) = g_m \\]\n\nSo, \\( g_m \\) remains unchanged when both \\( W \\) and \\( L \\) are doubled.\n\n### Output Conductance \\( g_{ds} \\)\n\nThe output conductance \\( g_{ds} \\) is approximately given by:\n\n\\[ g_{ds} \\approx \\frac{I_D}{V_{DS(sat)}} \\]\n\nwhere \\( V_{DS(sat)} \\) is the saturation voltage. \n\nFrom the expression for \\( I_D \\):\n\n\\[ I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 \\]\n\nDoubling both \\( W \\) and \\( L \\) results in:\n\n\\[ I_D' = \\frac{1}{2} \\mu_n C_{ox} \\frac{2W}{2L} (V_{GS} - V_{th})^2 = I_D \\]\n\nSo, \\( I_D \\) remains unchanged. Assuming \\( V_{DS(sat)} \\) remains constant, \\( g_{ds} \\) also remains unchanged.\n\n### Intrinsic Gain \\( A_i \\)\n\nSince both \\( g_m \\) and \\( g_{ds} \\) remain unchanged when \\( W \\) and \\( L \\) are doubled, the intrinsic gain \\( A_i \\) remains the same:\n\n\\[ A_i' = \\frac{g_m'}{g_{ds}'} = \\frac{g_m}{g_{ds}} = A_i \\]\n\n### Conclusion\n\nDoubling both the length and width of a MOSFET does not change its intrinsic gain \\( A_i \\). The intrinsic gain remains the same because the transconductance \\( g_m \\) and the output conductance \\( g_{ds} \\) are not affected by this scaling.",
        "format": "markdown",
        "sha256": "38bab7df67202efb850686d868099e1581b3d21f787c5d66c729b3189de27d26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that gm and ID are approximately unchanged at fixed overdrive, but uses an incorrect gds relation and misses that longer L reduces channel-length modulation, increasing ro and intrinsic gain. Its conclusion is therefore opposite the correct trend.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 790,
        "total_tokens": 808,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 790,
        "total_tokens": 808,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The intrinsic gain of a MOSFET, often referred to as the transconductance gain, is influenced by several factors, including the dimensions of the MOSFET. To understand what happens when we double the length (L) and width (W) of a MOSFET, let's break down the key parameters and relationships.\n\n### Intrinsic Gain of a MOSFET\n\nThe intrinsic gain (A_i) of a MOSFET is given by the product of the transconductance (g_m) and the output resistance (r_o):\n\n\\[ A_i = g_m \\times r_o \\]\n\n### Transconductance (g_m)\n\nThe transconductance \\( g_m \\) is defined as the change in drain current \\( I_D \\) with respect to the change in gate-source voltage \\( V_{GS} \\):\n\n\\[ g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\]\n\nFor a MOSFET in saturation, the drain current \\( I_D \\) can be approximated by:\n\n\\[ I_D \\approx \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 \\]\n\nwhere:\n- \\( \\mu_n \\) is the electron mobility,\n- \\( C_{ox} \\) is the oxide capacitance per unit area,\n- \\( W \\) is the width of the channel,\n- \\( L \\) is the length of the channel,\n- \\( V_{GS} \\) is the gate-source voltage,\n- \\( V_{th} \\) is the threshold voltage.\n\nThe transconductance \\( g_m \\) can then be derived as:\n\n\\[ g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th}) \\]\n\n### Output Resistance (r_o)\n\nThe output resistance \\( r_o \\) is given by:\n\n\\[ r_o = \\frac{1}{\\lambda I_D} \\]\n\nwhere \\( \\lambda \\) is the channel-length modulation parameter.\n\n### Effect of Doubling Length and Width\n\nNow, let's consider the effect of doubling both the length \\( L \\) and the width \\( W \\):\n\n1. **Drain Current \\( I_D \\)**:\n   - When both \\( L \\) and \\( W \\) are doubled, the drain current \\( I_D \\) remains the same because the ratio \\( \\frac{W}{L} \\) is constant.\n   \n2. **Transconductance \\( g_m \\)**:\n   - Since \\( g_m \\) is proportional to \\( \\frac{W}{L} \\), doubling both \\( W \\) and \\( L \\) leaves \\( g_m \\) unchanged.\n   \n3. **Output Resistance \\( r_o \\)**:\n   - The output resistance \\( r_o \\) is inversely proportional to the drain current \\( I_D \\). Since \\( I_D \\) remains constant, \\( r_o \\) also remains constant.\n\n### Intrinsic Gain \\( A_i \\)\n\nSince both \\( g_m \\) and \\( r_o \\) remain unchanged when doubling both \\( L \\) and \\( W \\), the intrinsic gain \\( A_i \\) remains the same:\n\n\\[ A_i = g_m \\times r_o \\]\n\n### Conclusion\n\nDoubling both the length and width of a MOSFET does not change its intrinsic gain. The intrinsic gain remains constant because the changes in dimensions affect the drain current and transconductance in a way that their product, which determines the intrinsic gain, stays the same.",
        "format": "markdown",
        "sha256": "a7c3f746ae53c942e28e2d4431b568772a1a0256a1d17a1ed5007b914f08102b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that doubling both dimensions leaves W/L, and thus gm and (at fixed overdrive) drain current, approximately unchanged. But it overlooks that lambda decreases with channel length, so ro and intrinsic gain approximately double rather than stay constant.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 770,
        "total_tokens": 788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 18,
        "output_tokens": 770,
        "total_tokens": 788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine who is correct, let's analyze the transconductance of a MOSFET and its relationship with the overdrive voltage.\n\nThe transconductance \\( g_m \\) of a MOSFET is given by the equation:\n\\[ g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\]\nwhere \\( I_D \\) is the drain current and \\( V_{GS} \\) is the gate-to-source voltage.\n\nFor a MOSFET operating in the saturation region, the drain current \\( I_D \\) can be expressed as:\n\\[ I_D = \\frac{1}{2} k_n' (W/L) (V_{GS} - V_t)^2 \\]\nwhere \\( k_n' \\) is the process transconductance parameter, \\( W \\) is the channel width, \\( L \\) is the channel length, and \\( V_t \\) is the threshold voltage.\n\nThe overdrive voltage \\( V_{OV} \\) is defined as:\n\\[ V_{OV} = V_{GS} - V_t \\]\n\nTo find the transconductance, we take the derivative of \\( I_D \\) with respect to \\( V_{GS} \\):\n\\[ g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k_n' (W/L) (V_{GS} - V_t) = k_n' (W/L) V_{OV} \\]\n\nFrom this equation, we can see that the transconductance \\( g_m \\) is directly proportional to the overdrive voltage \\( V_{OV} \\). Therefore, as the overdrive voltage increases, the transconductance also increases.\n\nThus, Student A is correct. The transconductance of a MOSFET goes up as the overdrive voltage increases.\n\nThe final answer is:\n\\[\n\\boxed{A}\n\\]",
        "format": "markdown",
        "sha256": "290004f5a1a3a8ecc9cf294f978c523c3ea4cd3f7ecdb0cc943d707ee80e57cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives gm = kn′(W/L)VOV and concludes that Student A is right. The proportionality assumes a fixed transistor geometry, as in the golden solution.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 396,
        "total_tokens": 425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 396,
        "total_tokens": 425,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine who is correct, let's analyze the transconductance of a MOSFET.\n\nThe transconductance (\\(g_m\\)) of a MOSFET in saturation mode is given by the equation:\n\n\\[ g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\]\n\nwhere \\(I_D\\) is the drain current and \\(V_{GS}\\) is the gate-to-source voltage. For a MOSFET in saturation, the drain current \\(I_D\\) can be expressed as:\n\n\\[ I_D = \\frac{1}{2} k_n (V_{GS} - V_t)^2 \\]\n\nwhere \\(k_n\\) is the process transconductance parameter and \\(V_t\\) is the threshold voltage. The overdrive voltage \\(V_{OV}\\) is defined as:\n\n\\[ V_{OV} = V_{GS} - V_t \\]\n\nSubstituting \\(V_{OV}\\) into the drain current equation, we get:\n\n\\[ I_D = \\frac{1}{2} k_n V_{OV}^2 \\]\n\nNow, let's find the transconductance \\(g_m\\):\n\n\\[ g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\frac{\\partial}{\\partial V_{GS}} \\left( \\frac{1}{2} k_n (V_{GS} - V_t)^2 \\right) = k_n (V_{GS} - V_t) = k_n V_{OV} \\]\n\nFrom this equation, we can see that the transconductance \\(g_m\\) is directly proportional to the overdrive voltage \\(V_{OV}\\). Therefore, as the overdrive voltage increases, the transconductance also increases.\n\nThus, Student A is correct.\n\nThe final answer is:\n\n\\boxed{A}",
        "format": "markdown",
        "sha256": "ac7f04eeb44365bfadac85b3ad194dcd544bcb2ca520c2287f1f1d9875148bb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats the device parameter as fixed, derives gm = kn·VOV, and concludes that Student A is right. The fixed-ID caveat is optional.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 390,
        "total_tokens": 419,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 390,
        "total_tokens": 419,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine who is correct, let's first define transconductance and overdrive voltage for a MOSFET.\n\n**Transconductance (gm):** \nTransconductance is a measure of how effectively a MOSFET converts input voltage changes into output current changes. It is defined as the ratio of the change in drain current (Id) to the change in gate-source voltage (Vgs):\n\\[ g_m = \\frac{\\partial I_d}{\\partial V_{gs}} \\]\n\n**Overdrive Voltage (Vov):**\nOverdrive voltage is the amount by which the gate-source voltage (Vgs) exceeds the threshold voltage (Vth) of the MOSFET:\n\\[ V_{ov} = V_{gs} - V_{th} \\]\n\nFor a MOSFET operating in the saturation region, the drain current (Id) can be expressed as:\n\\[ I_d = \\frac{1}{2} k' (W/L) (V_{gs} - V_{th})^2 \\]\nwhere \\( k' \\) is the process transconductance parameter, \\( W \\) is the channel width, and \\( L \\) is the channel length.\n\nNow, let's find the transconductance (gm) in the saturation region:\n\\[ g_m = \\frac{\\partial I_d}{\\partial V_{gs}} = k' (W/L) (V_{gs} - V_{th}) \\]\nSince \\( V_{ov} = V_{gs} - V_{th} \\), we can rewrite this as:\n\\[ g_m = k' (W/L) V_{ov} \\]\n\nFrom this equation, we can see that the transconductance (gm) is directly proportional to the overdrive voltage (Vov). Therefore, as the overdrive voltage increases, the transconductance also increases.\n\n**Conclusion:**\nStudent A is correct. The transconductance of a MOSFET goes up as the overdrive voltage increases.",
        "format": "markdown",
        "sha256": "9022defe93b51a08983b4aade35ce98e0406f394a9084d34dcf9921b2dd63f84"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives that gm = k′(W/L)Vov and concludes that Student A is right. The stated relationship implicitly holds W/L, and thus device size, fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 414,
        "total_tokens": 443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 29,
        "output_tokens": 414,
        "total_tokens": 443,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models for PMOS and NMOS devices are similar in structure but have some key differences due to the different polarities of the devices.\n\n### Similarities:\n1. **Transconductance (gm)**: Both models include a transconductance parameter that relates the change in drain current to the change in gate-source voltage.\n2. **Output Resistance (ro)**: Both models include an output resistance that accounts for the finite output impedance of the device.\n3. **Gate-Source Capacitance (Cgs) and Gate-Drain Capacitance (Cgd)**: Both models include capacitances that represent the gate-source and gate-drain overlap capacitances.\n4. **Bulk (or Substrate) Effects**: Both models can include a bulk terminal with associated capacitances and a bulk transconductance parameter (gmb) if the body effect is significant.\n\n### Differences:\n1. **Polarity of Voltages and Currents**:\n   - In an NMOS device, the gate-source voltage \\( V_{GS} \\) is positive for enhancement-mode operation, and the drain current \\( I_D \\) flows from drain to source.\n   - In a PMOS device, the gate-source voltage \\( V_{GS} \\) is negative for enhancement-mode operation, and the drain current \\( I_D \\) flows from source to drain.\n\n2. **Transconductance (gm)**:\n   - For NMOS: \\( g_m = \\frac{\\partial I_D}{\\partial V_{GS}} \\)\n   - For PMOS: \\( g_m = \\frac{\\partial I_D}{\\partial V_{SG}} \\) (note the change in sign due to the inversion of voltage polarity).\n\n3. **Threshold Voltage**:\n   - NMOS has a positive threshold voltage \\( V_{TN} \\).\n   - PMOS has a negative threshold voltage \\( V_{TP} \\).\n\n4. **Body Effect**:\n   - The body effect parameter \\( \\gamma \\) and the bulk transconductance \\( g_{mb} \\) will have the same form but will be applied with respect to the appropriate terminal polarities.\n\n### Small-Signal Model Representation:\n- **NMOS**:\n  - \\( g_m (V_{GS} - V_{TN}) \\)\n  - \\( r_o \\) (output resistance)\n  - \\( C_{gs} \\), \\( C_{gd} \\), and \\( C_{gb} \\) (capacitances)\n\n- **PMOS**:\n  - \\( g_m (V_{SG} - V_{TP}) \\) (note \\( V_{SG} \\) instead of \\( V_{GS} \\))\n  - \\( r_o \\) (output resistance)\n  - \\( C_{gs} \\), \\( C_{gd} \\), and \\( C_{gb} \\) (capacitances)\n\nIn summary, while the small-signal models for PMOS and NMOS devices are structurally similar, the key differences lie in the polarity of the voltages and currents, and the signs of the threshold voltages and transconductance relationships.",
        "format": "markdown",
        "sha256": "a7c3eeacecbb85870373b7537817b72c04d3bf44e54ec2de2ae255488a814312"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer correctly conveys that the models have the same structure, with polarity and sign-convention differences. This satisfies the golden solution’s full-credit rule; the extra threshold-voltage discussion is not central.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 655,
        "total_tokens": 675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 655,
        "total_tokens": 675,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models for PMOS and NMOS devices are similar in structure but have some key differences due to the different polarities of the devices.\n\n### Similarities:\n1. **Transconductance (gm)**: Both models include a transconductance parameter, \\( g_m \\), which relates the change in drain current to the change in gate-source voltage.\n2. **Output Resistance (ro)**: Both models include an output resistance, \\( r_o \\), which accounts for the Early effect and the finite output impedance of the device.\n3. **Gate-Source Capacitance (Cgs)**: Both models include a gate-source capacitance, \\( C_{gs} \\), which represents the capacitance between the gate and the source.\n4. **Gate-Drain Capacitance (Cgd)**: Both models include a gate-drain capacitance, \\( C_{gd} \\), which represents the Miller capacitance effect.\n5. **Bulk (or Substrate) Effects**: Both models can include a bulk or substrate terminal with associated capacitances and resistances.\n\n### Differences:\n1. **Polarity of Voltages and Currents**:\n   - For NMOS: The source is typically at a lower potential than the drain when the device is in saturation. The gate-source voltage \\( V_{GS} \\) is positive.\n   - For PMOS: The source is typically at a higher potential than the drain when the device is in saturation. The gate-source voltage \\( V_{GS} \\) is negative.\n   \n2. **Transconductance Sign**:\n   - The transconductance \\( g_m \\) for both devices is positive, but the way it influences the drain current differs due to the opposite polarities. For NMOS, an increase in \\( V_{GS} \\) increases the drain current. For PMOS, an increase in the magnitude of \\( V_{GS} \\) (becoming more negative) increases the drain current.\n   \n3. **Body Effect**:\n   - The body effect (or substrate bias effect) influences the threshold voltage differently for NMOS and PMOS. For NMOS, a more negative substrate voltage increases the threshold voltage. For PMOS, a more positive substrate voltage increases the threshold voltage.\n\n### Small-Signal Model Representation:\n- **NMOS**:\n  \\[\n  \\text{Drain Current: } \\delta I_D = g_m \\delta V_{GS} - \\frac{\\delta V_{DS}}{r_o}\n  \\]\n- **PMOS**:\n  \\[\n  \\text{Drain Current: } \\delta I_D = -g_m \\delta V_{GS} - \\frac{\\delta V_{SD}}{r_o}\n  \\]\n  Note the negative sign in front of \\( g_m \\delta V_{GS} \\) for PMOS, reflecting the inversion of polarity.\n\nIn summary, while the small-signal models for PMOS and NMOS devices share a similar structure, they differ in the polarity of voltages and currents and the sign of certain parameters due to the inherent differences in the operation of PMOS and NMOS transistors.",
        "format": "markdown",
        "sha256": "9546924d1db861446815ceddce69157fceda59ffedd2ccd6c31620286cf5ba38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the same small-signal structure and attributes apparent differences to polarity and sign conventions, matching the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 654,
        "total_tokens": 674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 654,
        "total_tokens": 674,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The small-signal models for PMOS and NMOS devices are similar in structure but have some key differences due to the different polarities of the devices.\n\n### Similarities:\n1. **Transconductance (gm)**: Both models include a transconductance parameter that relates the input voltage to the output current.\n2. **Output Resistance (ro)**: Both models include an output resistance that accounts for the finite output impedance of the device.\n3. **Gate-Source Capacitance (Cgs) and Gate-Drain Capacitance (Cgd)**: Both models include capacitances that represent the gate-source and gate-drain overlap capacitances.\n\n### Differences:\n1. **Polarity of Voltages and Currents**:\n   - In an NMOS device, the source is typically at a lower potential than the drain when the device is in saturation, and the gate voltage is higher than the source voltage to turn the device on.\n   - In a PMOS device, the source is typically at a higher potential than the drain when the device is in saturation, and the gate voltage is lower than the source voltage to turn the device on.\n\n2. **Transconductance (gm)**:\n   - For an NMOS, \\( g_m \\) is positive.\n   - For a PMOS, \\( g_m \\) is also positive, but the direction of the controlled current source in the small-signal model is opposite due to the inversion of polarities.\n\n3. **Body Effect**:\n   - Both NMOS and PMOS devices exhibit a body effect, but the influence on threshold voltage is opposite due to the different doping types (N-type for NMOS and P-type for PMOS).\n\n### Small-Signal Model Representation:\n- **NMOS**:\n  - Controlled current source from drain to source with value \\( g_m v_{gs} \\).\n  - Output resistance \\( r_o \\) in parallel with the current source.\n  - Capacitances \\( C_{gs} \\) and \\( C_{gd} \\).\n\n- **PMOS**:\n  - Controlled current source from source to drain with value \\( g_m v_{sg} \\) (note the inversion).\n  - Output resistance \\( r_o \\) in parallel with the current source.\n  - Capacitances \\( C_{sg} \\) and \\( C_{sd} \\) (again, note the inversion in notation).\n\nIn summary, while the small-signal models for PMOS and NMOS devices are structurally similar, the key differences lie in the polarity of voltages and currents, and the direction of the controlled current source.",
        "format": "markdown",
        "sha256": "b398b0fe6617ad2e0525330dbc04afed487f70ac98065f3aab33e620a9d5fa02"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly conveys that the PMOS model has the same basic form as the NMOS model, with polarity and controlled-source directions depending on the sign convention.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 550,
        "total_tokens": 570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 20,
        "output_tokens": 550,
        "total_tokens": 570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The current $ {I}_{X}$ is given by $ {I}_{X}=\\frac{VX}{{R}_{1}}$ Thus, the graph is a straight line passing through the origin. The slope of the line is $ \\frac{1}{{R}_{1}}$",
        "format": "markdown",
        "sha256": "ba8fb408b700342cfad1da90d7fbe6072795c7a9bddf82a87b9c8b7edd21f623"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a diode-connected NMOS, not a resistor; its current is approximately zero below threshold and rises quadratically above threshold, not linearly as VX/R1.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4570,
        "output_tokens": 5177,
        "total_tokens": 9747,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 57,
        "total_tokens": 2342,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Kirchhoff’s voltage law:  Kirchhoff’s voltage law states that the sum of the voltage around the loop must equals to zero.  ∑V=0  As the voltage drops around the loop equals to the sum of voltage rises.  ## The given data:  The current source is: \\\\({{\\rm{I}}_{\\rm{X}}}\\\\)  The voltage source is: \\\\({{\\rm{V}}_{\\rm{X}}}\\\\)  The resistor is: \\\\({{\\rm{M}}_{\\rm{1}}}\\\\)  ## The value of IX versus VX:  Apply Kirchhoff’s voltage law to the loop.  \\\\({{\\rm{V}}_{\\rm{X}}}{\\rm{ = }}{{\\rm{I}}_{\\rm{X}}}{{\\rm{M}}_{\\rm{1}}}\\\\)  The above equation is the equation of straight line.  \\\\({{\\rm{V}}_{\\rm{X}}}\\\\)is the dependent variable and\\\\({{\\rm{I}}_{\\rm{X}}}\\\\)is the independent variable.  The slope of the line is\\\\({{\\rm{M}}_{\\rm{1}}}\\\\).  The line will pass through the origin.\n\nThe equation of the straight line is \\\\({{\\rm{V}}_{\\rm{X}}}{\\rm{ = }}{{\\rm{I}}_{\\rm{X}}}{{\\rm{M}}_{\\rm{1}}}\\\\).",
        "format": "markdown",
        "sha256": "33fa801fe6dd6d2b203a17a58083269272b1d9c6f31d522e1a53354096d6e55a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the diode-connected NMOS as a resistor and predicts a straight-line relation through the origin, missing the near-zero current below threshold and quadratic rise above it.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 285,
        "total_tokens": 2570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 285,
        "total_tokens": 2570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Determine the formulas of voltage and current\n\nThe voltage across the resistor is\n\n$ {V}_{R}={I}_{X}{R}_{1}$\n\nThe current through the resistor is\n\n$ {I}_{X}=\\frac{{V}_{X}}{{R}_{1}}$\n\nHere,$ {V}_{X}$is the voltage across the resistor,$ {I}_{X}$is the current\nthrough the resistor, and$ {R}_{1}$is the resistance of the resistor.\n\n\n## Determine the graph of IX versus VX\n\nThe graph of$ {I}_{X}$versus$ {V}_{X}$is a straight line passing through\nthe origin with a slope of$ \\frac{1}{{R}_{1}}$.\n\nTherefore, the graph of$ {I}_{X}$versus$ {V}_{X}$is a straight line passing\nthrough the origin with a slope of$ \\frac{1}{{R}_{1}}$.\n\nThe graph of$ {I}_{X}$versus$ {V}_{X}$is a straight line passing through the\norigin with a slope of$ \\frac{1}{{R}_{1}}$.",
        "format": "markdown",
        "sha256": "25496077de507465debec2ef66132e4b8c3eb1d2f1ec7ca2a5901a5a43adc170"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the circuit as a resistor and predicts a linear I–V relation. The actual diode-connected NMOS is off up to threshold, then its current rises approximately quadratically.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 235,
        "total_tokens": 2520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2285,
        "output_tokens": 235,
        "total_tokens": 2520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The correct Answer is:$ (\\#\\#IJ{A}_{P}H{Y}_{V}{02}_{C}{08}_{E}{01}_{090}\\_A01\\#\\#)$\n\nIf $ {V}_{X}$ is positive, diode is forward biased, $ {I}_{X}$ will follow the graph (1) If $ {V}_{X}$ is negative, diode is reverse biased, $ {I}_{X}$ will follow the graph (2)",
        "format": "markdown",
        "sha256": "49f55b6c81ef6f34aab0744bf082f785af4ae9ec127e5e2169688cae811dc5fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is an NMOS with its gate driven by VX, not a diode. The answer misses the threshold, saturation, and triode-region behavior that determines IX versus VX.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2191,
        "output_tokens": 104,
        "total_tokens": 2295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2191,
        "output_tokens": 104,
        "total_tokens": 2295,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The correct Answer is:$ (\\#\\#IJ{A}_{P}H{Y}_{V}{02}_{C}{08}_{E}{01}_{090}\\_A01\\#\\#)$\n\nIf $ {V}_{X}$ is positive, diode is forward biased, $ {V}_{X}=0$ if $ {V}_{X}$ is negative, diode is reverse biased, $ {I}_{X}=0$",
        "format": "markdown",
        "sha256": "dfdf668e8ea3aa8d49391d280e330efe7e1cc27f54f0454ad523f9ca8eb34b6e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is an NMOS with VX at its gate, not a diode. The answer misses the threshold, saturation, and triode behavior that determine IX versus VX.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2191,
        "output_tokens": 94,
        "total_tokens": 2285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2191,
        "output_tokens": 94,
        "total_tokens": 2285,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The correct Answer is:$ (\\#\\#IJ{A}_{P}H{Y}_{V}{02}_{C}{08}_{E}{01}_{035}\\_A01\\#\\#)$\n\nIf $ {V}_{X}$ is positive, diode is forward biased, $ {V}_{X}$ should be less than 1 V (breakdown voltage) For $ {V}_{X}<0$ and $ \\left|{V}_{X}\\right|>1V$, diode is reverse biased and for $ \\left|{V}_{X}\\right|>1V$, it is in breakdown region.",
        "format": "markdown",
        "sha256": "469bb624569f97fcac343494c15c6565f2cb9ec431bf905180b5772126efab97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a diode and discusses forward bias and breakdown, missing the NMOS current-versus-gate behavior: quadratic rise in saturation followed by roughly linear rise in triode.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2191,
        "output_tokens": 133,
        "total_tokens": 2324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2191,
        "output_tokens": 133,
        "total_tokens": 2324,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device can act as a current source. The current through the load is given by $I=\\frac{V}{{R}_{1}+{R}_{2}}$. Since the voltage across the load is constant, the current through the load is also constant.",
        "format": "markdown",
        "sha256": "e37eb9381fa7aa407fd6377aba4c68db6d90d60cca909ebd1f9c2b8da95baafe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It incorrectly concludes that the diode-connected PMOS can act as a current source; it presents low impedance, not constant current. The resistor-based explanation does not address the device.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 56,
        "total_tokens": 1846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 56,
        "total_tokens": 1846,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device can act as a current source. The current through the load is given by $ {I}_{X}=\\frac{{V}_{BB}-{V}_{BE}}{{R}_{BB}}$ which is constant and independent of the load.",
        "format": "markdown",
        "sha256": "df7e71ce4d6e76ff63b8f49b768f88abcd6521f4a05954817a87773cc6dbc77a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly says the device can act as a current source and applies a BJT bias formula. The figure shows a diode-connected PMOS, which presents low impedance rather than supplying a nearly constant current.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 49,
        "total_tokens": 1839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 49,
        "total_tokens": 1839,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the device can act as a current source. The current through the load is given by $I=\\frac{V}{{R}_{1}}$. As $R$ is decreased, current increases. For $R=0,I=\\frac{V}{{R}_{1}}$. For $R<{R}_{1}$, the current through the load will be greater than $V/{R}_{1}$, i.e., the current increases as the load resistance decreases. This is the characteristic of a current source.",
        "format": "markdown",
        "sha256": "d2db0bd1e0c57fed0aa20b0a1b6800337d25ad6d82238c0c1337b88b4c75ed04"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It incorrectly concludes that the device can act as a current source. The diode-connected PMOS presents low impedance (about 1/gm), so its current varies with terminal voltage; the resistor argument does not address this.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 108,
        "total_tokens": 1898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1790,
        "output_tokens": 108,
        "total_tokens": 1898,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Apply KVL at the input side, we have $ {V}_{in}={V}_{DD}-{I}_{1}{R}_{S}$ Or $ {I}_{1}=\\frac{{V}_{DD}-{V}_{in}}{{R}_{S}}$ \n\nApply KVL at the output side, we have $ {V}_{x}={V}_{DD}-{I}_{2}{R}_{D}$ Or $ {I}_{2}=\\frac{{V}_{DD}-{V}_{X}}{{R}_{D}}$ The drain current is $ {I}_{D}=\\frac{{V}_{DD}-{V}_{X}}{{R}_{D}}$.....(i) where $ {V}_{X}$ is the voltage at the node x. Now $ {V}_{X}-{V}_{S}=-{I}_{D}{R}_{D}$ Or $ {V}_{X}-{V}_{S}=-{I}_{D}{R}_{S}$........(ii) From equations (i) and (ii), we have $ {V}_{X}-{V}_{S}=-\\frac{({V}_{DD}-{V}_{X})}{{R}_{D}}{R}_{S}$ Or $ {V}_{X}-{V}_{S}=-\\frac{({V}_{DD}-{V}_{X})}{{R}_{D}}{R}_{S}$ $ {V}_{X}(1+\\frac{{R}_{S}}{{R}_{D}})={V}_{S}+\\frac{{R}_{S}}{{R}_{D}}{V}_{DD}$ Or $ {V}_{X}=\\frac{{V}_{S}+\\frac{{R}_{S}}{{R}_{D}}{V}_{DD}}{1+\\frac{{R}_{S}}{{R}_{D}}}$.....(iii) From equations (i) and (iii), we have $ {I}_{D}=\\frac{{V}_{DD}-\\frac{{V}_{S}+\\frac{{R}_{S}}{{R}_{D}}{V}_{DD}}{1+\\frac{{R}_{S}}{{R}_{D}}}}{{R}_{D}}$ $ =\\frac{{V}_{DD}(1+\\frac{{R}_{S}}{{R}_{D}})-{V}_{S}-\\frac{{R}_{S}}{{R}_{D}}{V}_{DD}}{{R}_{D}(1+\\frac{{R}_{S}}{{R}_{D}})}$ $ =\\frac{{V}_{DD}+\\frac{{R}_{S}}{{R}_{D}}{V}_{DD}-{V}_{S}-\\frac{{R}_{S}}{{R}_{D}}{V}_{DD}}{{R}_{D}+\\frac{{R}_{S}{R}_{D}}{{R}_{D}}}$ $ =\\frac{{V}_{DD}-{V}_{S}}{{R}_{D}+\\frac{{R}_{S}{R}_{D}}{{R}_{D}}}=\\frac{{V}_{DD}-{V}_{S}}{\\frac{{R}_{D}{R}_{S}+{R}_{D}^{2}}{{R}_{D}}}$ $ {I}_{D}=\\frac{{V}_{DD}-{V}_{S}}{{R}_{D}+\\frac{{R}_{S}{R}_{D}}{{R}_{D}}}=\\frac{{V}_{DD}-{V}_{S}}{\\frac{{R}_{D}{R}_{S}+{R}_{D}^{2}}{{R}_{D}}}$ $ =\\frac{{V}_{DD}-{V}_{S}}{\\frac{{R}_{D}{R}_{S}+{R}_{D}^{2}}{{R}_{D}}}=\\frac{{V}_{DD}-{V}_{S}}{{R}_{D}(\\frac{{R}_{S}}{{R}_{D}}+1)}$ $ =\\frac{{V}_{DD}-{V}_{S}}{{R}_{D}(1+\\frac{{R}_{S}}{{R}_{D}})}$ From equation (ii), we have $ {V}_{X}={V}_{S}+{I}_{D}{R}_{S}$ $ ={V}_{S}+\\left(\\frac{{V}_{DD}-{V}_{S}}{{R}_{D}(1+\\frac{{R}_{S}}{{R}_{D}})}\\right){R}_{S}$ $ ={V}_{S}+\\left(\\frac{{V}_{DD}-{V}_{S}}{1+\\frac{{R}_{S}}{{R}_{D}}}\\right)\\left(\\frac{{R}_{S}}{{R}_{D}}\\right)$ $ ={V}_{S}+\\left(\\frac{{V}_{DD}-{V}_{S}}{1+\\frac{{R}_{S}}{{R}_{D}}}\\right)\\left(\\frac{{R}_{S}}{{R}_{D}}\\right)$ $ ={V}_{S}(1+\\frac{\\frac{{R}_{S}}{{R}_{D}}}{1+\\frac{{R}_{S}}{{R}_{D}}})+\\frac{{V}_{DD}\\left(\\frac{{R}_{S}}{{R}_{D}}\\right)}{1+\\frac{{R}_{S}}{{R}_{D}}}$ $ {V}_{X}=\\frac{{V}_{S}(1+\\frac{{R}_{S}}{{R}_{D}})+{V}_{DD}\\frac{{R}_{S}}{{R}_{D}}}{1+\\frac{{R}_{S}}{{R}_{D}}}$.",
        "format": "markdown",
        "sha256": "62a55acdaf2a7f0159cbf3e83f31a08bd03f5770c60de172b4f05d33f9f55043"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify the PMOS common-source stage or derive its inverting gain. It instead gives inconsistent DC resistor equations and misstates the output-side connection, so it misses the essential circuit analysis.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 1014,
        "total_tokens": 2848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 1014,
        "total_tokens": 2848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Apply KVL at the input side, we have $ {V}_{in}={V}_{DD}-{I}_{1}{R}_{S}$ Or $ {I}_{1}=\\frac{{V}_{DD}-{V}_{in}}{{R}_{S}}$ \n\nApplying KVL in the output loop, we have $ {V}_{out}={I}_{1}{R}_{D}$ Substituting the value of $ {I}_{1}$, we have $ {V}_{out}=\\left(\\frac{{V}_{DD}-{V}_{in}}{{R}_{S}}\\right){R}_{D}$ Or $ \\frac{{V}_{out}}{{V}_{in}}=-\\frac{{R}_{D}}{{R}_{S}}$ This shows that output is inverted w.r.t. input.",
        "format": "markdown",
        "sha256": "7664055f608e7049a503520c38036e5cc4a7e0a383b46a24420599668e199398"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gets the inversion direction, but treats the gate voltage as setting the current through RS directly and derives −RD/RS. This misses the PMOS common-source stage’s transconductance and source-degeneration gain, −gmRD/(1 + gmRS).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 156,
        "total_tokens": 1990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 156,
        "total_tokens": 1990,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Apply KVL at the input side, we have $ {V}_{in}={V}_{DD}-{I}_{D}{R}_{S}$ Or $ {I}_{D}=\\frac{{V}_{DD}-{V}_{in}}{{R}_{S}}$ $ \\therefore {I}_{D}=\\frac{15-10}{5000}=1mA$ Now, $ {V}_{GS}={V}_{in}-{I}_{D}{R}_{S}$ $ =10-1\\times {10}^{-3}\\times 5\\times {10}^{3}=5V$ $ {V}_{GS}$ is positive, hence the MOSFET is ON. For MOSFET in saturation, we have $ {I}_{D}=\\frac{K}{2}{({V}_{GS}-{V}_{t})}^{2}$ Or $ 1\\times {10}^{-3}=\\frac{200\\times {10}^{-3}}{2}{(5-2)}^{2}$ The output voltage is given as $ {V}_{out}={V}_{DD}-{I}_{D}{R}_{D}$ $ =15-1\\times {10}^{-3}\\times 5\\times {10}^{3}$ $ =10V$",
        "format": "markdown",
        "sha256": "a726d395e09878a163ccae31542c1c86ab7eff6bc9d19d71d72de5b4dd0c2fbe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats the circuit as a DC bias calculation, uses an NMOS-style positive-VGS equation and incorrect node/resistor relations, and does not identify the PMOS common-source topology or give its inverting source-degenerated gain.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 261,
        "total_tokens": 2095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 261,
        "total_tokens": 2095,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a diode connected in series with a resistor $ {R}_{S}$ and a voltage source $ {V}_{DD}$. A MOSFET is connected in parallel with the resistor. The MOSFET has a threshold voltage $ {V}_{th}$ and operates in the triode region. The input voltage $ {V}_{in}$ is applied to the gate of the MOSFET through a capacitor. The output voltage $ {V}_{out}$ is taken across the resistor $ {R}_{S}$. \n\n(a) If $ {V}_{in}<{V}_{th}$, the MOSFET is in the cutoff region, and the current through the resistor is zero. Therefore, the output voltage is $ {V}_{out}={V}_{DD}$. (b) If $ {V}_{in}>{V}_{th}$, the MOSFET is in the triode region, and the current through the resistor is given by $ I=\\frac{{V}_{DD}-{V}_{out}}{{R}_{S}}$. The MOSFET can be modeled as a voltage-controlled resistor with a resistance given by $ {r}_{DS}=\\frac{{r}_{DS\\left(on\\right)}({V}_{in}-{V}_{th})}{{V}_{GS}-{V}_{th}}$, where $ {r}_{DS\\left(on\\right)}$ is the on-resistance of the MOSFET. The output voltage can be found by solving the following equation: $ {V}_{DD}={V}_{out}+I{R}_{S}+{V}_{in}\\frac{{r}_{DS}}{{R}_{S}+{r}_{DS}}$ Substituting the expression for $ I$ and $ {r}_{DS}$, we get $ {V}_{DD}={V}_{out}+\\frac{{V}_{DD}-{V}_{out}}{{R}_{S}}\\frac{{R}_{S}{r}_{DS\\left(on\\right)}({V}_{in}-{V}_{th})}{{V}_{GS}-{V}_{th}}+{V}_{in}\\frac{\\frac{{r}_{DS\\left(on\\right)}({V}_{in}-{V}_{th})}{{V}_{GS}-{V}_{th}}}{{R}_{S}+\\frac{{r}_{DS\\left(on\\right)}({V}_{in}-{V}_{th})}{{V}_{GS}-{V}_{th}}}$ Simplifying the equation, we get $ {V}_{out}=\\frac{{V}_{DD}{R}_{S}{V}_{GS}-{V}_{DD}{R}_{S}{V}_{th}-{V}_{DD}{r}_{DS\\left(on\\right)}({V}_{in}-{V}_{th})+{V}_{in}{R}_{S}{r}_{DS\\left(on\\right)}}{{R}_{S}{V}_{GS}-{R}_{S}{V}_{th}+{R}_{S}{r}_{DS\\left(on\\right)}+{r}_{DS\\left(on\\right)}({V}_{in}-{V}_{th})}$ Note that $ {V}_{GS}={V}_{in}-{V}_{out}$. Substituting this in the above equation and simplifying, we get a quadratic equation in $ {V}_{out}$: $ {V}_{out}^{2}-[{V}_{DD}+{V}_{in}\\frac{{r}_{DS\\left(on\\right)}}{{R}_{S}+{r}_{DS\\left(on\\right)}}]{V}_{out}+{V}_{DD}{V}_{th}+{V}_{in}\\frac{{r}_{DS\\left(on\\right)}{V}_{th}}{{R}_{S}+{r}_{DS\\left(on\\right)})}=0$ Solving this equation, we get the output voltage $ {V}_{out}$.",
        "format": "markdown",
        "sha256": "cf20bb4b0a5ef6b8bd9a5ac8d576a07dfb1a7e8ac57f8b4f82e1484617d2eed1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the source-follower topology and gives an unrelated, incorrect MOSFET/resistor analysis; it does not provide the required gain.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 764,
        "total_tokens": 2374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 764,
        "total_tokens": 2374,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a diode connected in series with a resistor and an input voltage source. The output voltage is measured across the resistor. The diode is forward biased, allowing current to flow through the circuit. The output voltage will be less than the input voltage due to the voltage drop across the diode. The exact value of the output voltage can be calculated using Kirchhoff's voltage law and the diode's voltage-current characteristic.",
        "format": "markdown",
        "sha256": "2d138487fd69a5cf66d27a82ddb2bc3d0e3d579f9a076934666566ba8e302b13"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source-follower MOSFET circuit as a diode-resistor circuit and gives no relevant gain analysis.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3220,
        "output_tokens": 87,
        "total_tokens": 3307,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 87,
        "total_tokens": 1697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows a diode connected in series with a resistor $ {R}_{S}$ and voltage applied to this series combination is battery of voltage $ {V}_{in}$ The diode considered here is ideal diode. For ideal diode when forward biased it acts as a conductor and in reverse biased it acts as insulator. \n\nCase (i) When positive end of battery is connected to the anode of diode as shown in the figure (a), diode is forward biased and hence offer zero resistance and the current flows through diode. The circuit then simply reduces to a series combination of resistor $ {R}_{S}$ with the battery. $ {V}_{out}=0V$ $ {V}_{in}={l}_{R}{R}_{S}$ $ l=\\frac{{V}_{in}}{{R}_{S}}$ Case (ii) When positive end of battery is connected to cathode of diode as shown in figure (b), diode is reverse biased and hence offer infinite resistance and hence no current flows through the circuit. $ {V}_{out}={V}_{in}$",
        "format": "markdown",
        "sha256": "be4a676bb016de2b8fb13ea2b46bebcdce0a1ce1c9758fb7353bd6878ea69357"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a MOS source follower, but the answer misidentifies it as an ideal diode circuit and gives no relevant source-follower analysis.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 214,
        "total_tokens": 1824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 214,
        "total_tokens": 1824,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is an emitter follower circuit, also known as a common collector circuit. It consists of a transistor (BJT) in common collector configuration, with the input voltage applied to the base and the output voltage taken from the emitter.\n\nTo analyze the circuit, we need to determine the voltage gain, input impedance, and output impedance.\n\n1. Voltage Gain:\nThe voltage gain of an emitter follower circuit is approximately equal to 1. This means that the output voltage closely follows the input voltage, with a small voltage drop across the transistor.\n\n2. Input Impedance:\nThe input impedance of an emitter follower circuit is relatively high. It is determined by the base resistor (Rb) and the input impedance of the transistor. The input impedance can be calculated using the formula:\n\nZin = Rb * (β + 1)\n\nwhere β is the current gain of the transistor.\n\n3. Output Impedance:\nThe output impedance of an emitter follower circuit is relatively low. It is determined by the emitter resistor (Re) and the output impedance of the transistor. The output impedance can be calculated using the formula:\n\nZout = Re / (β + 1)\n\nwhere β is the current gain of the transistor.\n\nIn summary, the emitter follower circuit provides a voltage gain of approximately 1, a high input impedance, and a low output impedance. It is commonly used as a buffer or voltage follower in electronic circuits.\nAnswer: The emitter follower circuit provides a voltage gain of approximately 1, a high input impedance, and a low output impedance.",
        "format": "markdown",
        "sha256": "f6d757a374a0cbe554d4b16d4883c3120675c03bf802449c524c13cd3eb049fa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Misidentifies the MOS common-gate stage as a BJT emitter follower, so it gives the wrong input/output terminals, topology, and gain and impedance behavior.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 313,
        "total_tokens": 1923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 313,
        "total_tokens": 1923,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit shows a diode connected in series with a resistor $ {R}_{D}$ and the combination is connected to a source of emf $ {V}_{in}$ through a diode $ {D}_{1}$ connected in parallel with the series combination. The diode  will conduct when the input voltage is positive. Thus, the voltage $ {V}_{out}$ will be equal to the input voltage $ {V}_{in}$. When the input voltage is negative, the diode $ {D}_{1}$ will not conduct. The input voltage will appear across the parallel combination of $ {D}_{1}$ and $ {R}_{D}$. As the diode $ {D}_{1}$ is reverse biased, it acts like an open circuit. Thus, the output voltage $ {V}_{out}$ will be $ -\\frac{{V}_{in}{R}_{D}}{{R}_{D}}=\\frac{{V}_{in}}{2}$ Thus, the output voltage is half of the input voltage and hence, this circuit is called a half-wave rectifier.",
        "format": "markdown",
        "sha256": "6279e5a0864f6d2483a1c1c217357026ad2df7fdfdfff0741fc7645c09351d48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a diode rectifier. The figure is a common-gate MOS stage with the input applied at M1's source; the response misses its topology and gives unrelated output behavior.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 211,
        "total_tokens": 1821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 211,
        "total_tokens": 1821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The given circuit is an emitter follower circuit, also known as a common collector circuit. It consists of a transistor (BJT) in common collector configuration, with the input voltage applied to the base and the output voltage taken from the emitter.\n\nTo analyze the circuit, we need to determine the voltage gain, input impedance, and output impedance.\n\n1. Voltage Gain:\nThe voltage gain of an emitter follower circuit is approximately equal to 1. This means that the output voltage closely follows the input voltage, with a slight voltage drop due to the base-emitter voltage (VBE) of the transistor.\n\n2. Input Impedance:\nThe input impedance of an emitter follower circuit is relatively high. It is determined by the base resistor (RB) and the input impedance of the transistor. The input impedance can be calculated using the formula:\n\nZin = RB || (β * re)\n\nwhere RB is the base resistor, β is the current gain of the transistor, and re is the emitter resistance.\n\n3. Output Impedance:\nThe output impedance of an emitter follower circuit is relatively low. It is determined by the emitter resistor (RE) and the output impedance of the transistor. The output impedance can be calculated using the formula:\n\nZout = RE || (re / (1 + β))\n\nwhere RE is the emitter resistor, re is the emitter resistance, and β is the current gain of the transistor.\n\nIn summary, the emitter follower circuit provides a voltage gain of approximately 1, a high input impedance, and a low output impedance. It is commonly used as a buffer or voltage follower in electronic circuits.\nAnswer: The circuit is an emitter follower circuit. It provides a voltage gain of approximately 1, a high input impedance, and a low output impedance.",
        "format": "markdown",
        "sha256": "5e493f9147448cb544d0ad6c84f60427824a17a9e3ff3cd757d0cdf03a3b15d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the MOS common-gate stage as a BJT emitter follower and gives the wrong input/output terminals and behavior. It misses the essential result: source input, ac-grounded gate, approximately 1/gm input resistance, and non-inverting gain of about gmRD.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 355,
        "total_tokens": 1965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 355,
        "total_tokens": 1965,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information   We have a circuit and we have to analyze it.  ## Step 2. Analyzing the circuit  As we can see in the circuit, the capacitor is open circuited for DC. So, the DC analysis of the circuit will be as follows:  [Capture_1.PNG]  Now, the Thevenin's equivalent of the above circuit will be as follows:  [Capture_2.PNG]  Now, the small signal model of the circuit will be as follows:  [Capture_3.PNG]  Now, we can see that the input voltage is applied across the series combination of the capacitor and the resistor. So, the output voltage will be as follows:  $ {V}_{out}=\\frac{{R}_{D}}{{R}_{D}+{R}_{eq}}{V}_{in}$  Where, $ {R}_{eq}$is the equivalent resistance of the capacitor and the resistor.  Now, we can see that the capacitor is in parallel with the resistor. So, the equivalent resistance will be as follows:  $ {R}_{eq}=\\frac{{R}_{D}\\left(\\frac{1}{\\omega C}\\right)}{{R}_{D}+\\left(\\frac{1}{\\omega C}\\right)}$  Now, we can substitute this value in the equation of the output voltage as follows:  $ {V}_{out}=\\frac{{R}_{D}}{{R}_{D}+\\frac{{R}_{D}\\left(\\frac{1}{\\omega C}\\right)}{{R}_{D}+\\left(\\frac{1}{\\omega C}\\right)}}{V}_{in}$  $ {V}_{out}=\\frac{{R}_{D}\\left({R}_{D}+\\frac{1}{\\omega C}\\right)}{{R}_{D}\\left({R}_{D}+\\frac{1}{\\omega C}\\right)+{R}_{D}\\left(\\frac{1}{\\omega C}\\right)}{V}_{in}$  $ {V}_{out}=\\frac{{R}_{D}\\left({R}_{D}+\\frac{1}{\\omega C}\\right)}{{R}_{D}^{2}+\\frac{{R}_{D}}{\\omega C}+\\frac{{R}_{D}}{\\omega C}}{V}_{in}$  $ {V}_{out}=\\frac{{R}_{D}\\left({R}_{D}+\\frac{1}{\\omega C}\\right)}{{R}_{D}^{2}+\\frac{2{R}_{D}}{\\omega C}}{V}_{in}$  $ {V}_{out}=\\frac{{R}_{D}+\\frac{1}{\\omega C}}{{R}_{D}+\\frac{2}{\\omega C}}{V}_{in}$  $ {V}_{out}=\\frac{{R}_{D}\\omega C+1}{{R}_{D}\\omega C+2}{V}_{in}$  $ {V}_{out}=\\frac{1+\\omega C{R}_{D}}{2+\\omega C{R}_{D}}{V}_{in}$  $ {V}_{out}=\\left(\\frac{1+\\omega C{R}_{D}}{2+\\omega C{R}_{D}}\\right){V}_{in}$  Hence, the output voltage is$ \\left(\\frac{1+\\omega C{R}_{D}}{2+\\omega C{R}_{D}}\\right){V}_{in}$.\n\nThe output voltage is$ \\left(\\frac{1+\\omega C{R}_{D}}{2+\\omega C{R}_{D}}\\right){V}_{in}$.",
        "format": "markdown",
        "sha256": "9cbeed5a3c90441ca9ed35b4a60459d1389658ca945305944caea0d8247f1c1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the source-to-ground short and models the circuit as an unrelated capacitor/resistor divider, rather than recognizing that the input is ideally shorted and the gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 717,
        "total_tokens": 2992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 717,
        "total_tokens": 2992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information  The circuit is given below.  [Capture_1.JPG]  ## Step 2. Analyze the circuit  The capacitor is fully charged, so the current through the capacitor is zero.  The current through the capacitor is zero, so the voltage drop across the resistor is equal to the input voltage.  The current through the resistor is given by  \\\\(I = \\frac{{{V_{in}}}}{{{R_D}}}\\\\)  The current through the resistor is equal to the current through the diode.  The voltage drop across the diode is given by  \\\\({V_{DD}} - {V_b} = {I_D}{R_D}\\\\)  \\\\({V_b} = {V_{DD}} - {I_D}{R_D}\\\\)  The voltage drop across the diode is given by  \\\\({V_b} = {V_{DD}} - \\frac{{{V_{in}}}}{{{R_D}}}{R_D}\\\\)  \\\\({V_b} = {V_{DD}} - {V_{in}}\\\\)  The output voltage is given by  \\\\({V_{out}} = {V_b} + {V_{in}}\\\\)  \\\\({V_{out}} = {V_{DD}}\\\\)  The output voltage is equal to the supply voltage.\n\nThe output voltage is equal to the supply voltage.",
        "format": "markdown",
        "sha256": "ca50c19b01c361ad7631d8117ca00bd1b539791d88686cabeb8dda73aafeed37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the circuit as a resistor/diode network and never notices that the input node is shorted to ground, so its output-voltage conclusion is unrelated to the circuit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 294,
        "total_tokens": 2569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 294,
        "total_tokens": 2569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information.  The given figure is,  [Capture_1.JPG]  ## Step 2. Concept Used.  Zener diode is a silicon semiconductor device that permits current to flow in either a forward or reverse direction.  ## Step 3. Calculation.  The given circuit is a Zener diode circuit.  The Zener diode is used as a shunt voltage regulator. Its function is to maintain a constant voltage across the load.  The Zener diode is used in its breakdown region as a voltage regulator, where the voltage across the diode remains constant even though the diode current changes over a wide range.  ## Step 4. Conclusion.  Therefore, the given circuit is a Zener diode circuit.\n\nThe given circuit is a Zener diode circuit.",
        "format": "markdown",
        "sha256": "f7062f51b2caf4c87029b573565e70e643f41086e64c570e5a24927a7bad92f4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the MOSFET circuit as a Zener regulator and does not analyze the source short or the resulting zero gain.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 164,
        "total_tokens": 2439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 164,
        "total_tokens": 2439,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Determine the number of poles  The number of poles of a circuit is equal to the number of independent energy storage elements.  The circuit has two capacitors and no inductors.  Therefore, the circuit has two poles.\n\nThe circuit has two poles.",
        "format": "markdown",
        "sha256": "685cf8379662ff4bf6095579542b0227459682d64a823486e4f208a983b0c3fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion of two poles is correct, but the circuit has four capacitors, not two. The answer does not explain that CSB is shorted out and the other capacitor voltages have only two independent states.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 58,
        "total_tokens": 2288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 58,
        "total_tokens": 2288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Determine the number of poles  The number of poles of a circuit is equal to the number of independent energy storage elements.  The circuit has two capacitors and no inductors.  Therefore, the circuit has two poles.\n\nThe circuit has two poles.",
        "format": "markdown",
        "sha256": "685cf8379662ff4bf6095579542b0227459682d64a823486e4f208a983b0c3fe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion of two poles is correct, but the circuit has four capacitors, not two. The answer does not explain that CSB is shorted out and the other capacitor voltages have only two independent states.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 58,
        "total_tokens": 2288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 58,
        "total_tokens": 2288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "1. **Identify the type of circuit**:  The circuit is a common-emitter amplifier with a single transistor (BJT). The transistor has three terminals: base, collector, and emitter.\n\n2. **Determine the number of poles in a common-emitter amplifier**:  A common-emitter amplifier typically has one pole, which is determined by the combination of the transistor's internal capacitance and the external components (like resistors and capacitors) connected to it.\n\nThe answer is 1",
        "format": "markdown",
        "sha256": "b8cb653cdaefadbd67e2a174f4c6a1ad3483089d4fd66c4ab9ac4465b2312c1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is an NMOS common-source stage with two poles, not a BJT common-emitter stage with one. The answer gives the wrong device topology and pole count, with no relevant capacitor-based justification.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 104,
        "total_tokens": 2334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2230,
        "output_tokens": 104,
        "total_tokens": 2334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows an inverting amplifier with a variable gain controlled by the voltage $ {V}_{F}$ applied to the varactor diode $ {D}_{v}$ \n\n(a) Show that the gain $ {A}_{v}={V}_{out}/{V}_{in}$ is given by $ {A}_{v}=-\\frac{{R}_{2}}{{R}_{1}}\\left(\\frac{1+{V}_{F}/{V}_{D}}}{1+{V}_{F}/{V}_{P}}}\\right)$ where $ {V}_{P}$ is the peak reverse bias voltage applied to the varactor diode by the circuit. (b) If $ {R}_{1}=1K\\Omega,{R}_{2}=10K\\Omega,{V}_{D}=3V$ and $ {V}_{P}=1V$, plot the gain $ {A}_{v}$ as a function of $ {V}_{F}$ for $ -3\\le {V}_{F}\\le 0$. \n\nThe correct Answer is:$ (\\#\\#IJ{A}_{P}H{Y}_{V}{02}_{C}{32}_{E}{01}_{070}\\_A01\\#\\#)$ (b)",
        "format": "markdown",
        "sha256": "0461d173fc137165599cef38c3851f008e31726e231b7b5274657a8d36853602"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer describes an unrelated varactor-based inverting amplifier and does not identify the source-input transistor or the divider feedback to its gate.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2226,
        "output_tokens": 257,
        "total_tokens": 2483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2226,
        "output_tokens": 257,
        "total_tokens": 2483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information.  The given circuit is:  [Capture_01.PNG]  ## Step 2. Apply the concept of voltage divider rule.  The current through the circuit is given by,  I=VinR1+R2+RD    Now, by using the voltage divider rule, the voltage across the resistor R2is given by,  VR2=VinR2R1+R2+RD    ## Step 3. Determine the value of Vout.  The output voltage is given by,  Vout=VinR2R1+R2+RD-Vth  Here, Vth is the threshold voltage of the diode.  Now, substitute the given values and solve.  Vout=VinR2R1+R2+RD-VthVout=VinR2R1+R2+RD-0.7V    ## Step 4. Determine the value of Vout.  The output voltage is given by,  Vout=VinR2R1+R2+RD-Vth  Here, Vth is the threshold voltage of the diode.  Now, substitute the given values and solve.  Vout=VinR2R1+R2+RD-0.7V    ## Step 5. Determine the value of Vout.  The output voltage is given by,  Vout=VinR2R1+R2+RD-Vth  Here, Vth is the threshold voltage of the diode.  Now, substitute the given values and solve.  Vout=VinR2R1+R2+RD-0.7V\n\nThe output voltage is Vout=VinR2R1+R2+RD-0.7V.",
        "format": "markdown",
        "sha256": "eb966f2465d95d50e8a14a7119cd9b72d2c29983687c12630b93f79870353ac4"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the MOSFET feedback amplifier as a resistor divider with a diode, missing the source input, gate feedback, and negative-feedback behavior.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4452,
        "output_tokens": 5506,
        "total_tokens": 9958,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2226,
        "output_tokens": 386,
        "total_tokens": 2612,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe input voltage is $V\\left(t\\right)=10\\mathrm{cos}\\left(2000t\\right)\\mathrm{V}$.\n\nThe value of the capacitor is $C=100\\mathrm{nF}$.\n\nThe value of the inductor is $L=100\\mathrm{mH}$.\n\nThe value of the resistor is $R=100\\mathrm{k\\Omega }$.\n\nThe value of the diode is $V=0.7\\mathrm{V}$.\n\n\n## Define the rms value\n\nThe rms value of a function _f(t)_ is defined as\n\n$ {f}_{\\mathrm{rms}}=\\sqrt{\\frac{1}{T}{\\int }_{0}^{T}{f}^{2}\\left(t\\right)dt}$\n\nHere, _T_ is the time period of the function _f(t)_.\n\n\n## Determine the rms value of the input voltage\n\nThe input voltage is $V\\left(t\\right)=10\\mathrm{cos}\\left(2000t\\right)\\mathrm{V}$.\n\nThe time period of the input voltage is\n\n$ \\begin{array}{rcl}T& =& \\frac{2\\mathrm{\\pi }}{2000}\\\\\\ & =& 0.00314\\mathrm{s}\\end{array}$\n\nThe rms value of the input voltage is\n\n$ \\begin{array}{rcl}{V}_{\\mathrm{rms}}& =&\n\\sqrt{\\frac{1}{0.00314}{\\int }_{0}^{0.00314}{\\left(10\\mathrm{cos}\\left(2000t\\right)\\right)}^{2}dt}\\\\\\\n& =& 7.07\\mathrm{V}\\end{array}$\n\nHence, the rms value of the input voltage is 7.07 V.\n\n\n## Determine the rms value of the output voltage\n\nThe output voltage is\n\n$ {V}_{\\text{out}}\\left(t\\right)=\\left\\\\{\\begin{array}{l}0\\mathrm{V}\\mathrm{for}0\\le\nt\\le 0.0005\\mathrm{s}\\\\\\\n10\\mathrm{cos}\\left(2000t\\right)-0.7\\mathrm{V}\\mathrm{for}0.0005\\le\nt\\le 0.00314\\mathrm{s}\\end{array}\\right.$\n\nThe rms value of the output voltage is\n\n$ \\begin{array}{rcl}{V}_{\\text{out},\\mathrm{rms}}& =&\n\\sqrt{\\frac{1}{0.00314}{\\int }_{0}^{0.00314}{V}_{\\text{out}}^{2}\\left(t\\right)dt}\\\\\\\n& =& 6.36\\mathrm{V}\\end{array}$\n\nHence, the rms value of the output voltage is 6.36 V.\n\nThe rms value of the input voltage is 7.07 V.\nThe rms value of the output voltage is 6.36 V.",
        "format": "markdown",
        "sha256": "b4fc9a93569b64fb6c3867da4a890abd7b1c738894fe6eb252c7254babf04f92"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer analyzes an unrelated diode waveform and does not identify the MOSFET source input, divider feedback to the gate, or negative feedback.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4452,
        "output_tokens": 5829,
        "total_tokens": 10281,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2226,
        "output_tokens": 709,
        "total_tokens": 2935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given circuit is,\n\n[Capture_1_1.PNG]\n\nThe voltage gain of the circuit is,\n\n\\\\(\\begin{array}{l}\\frac{{{V_{out}}}}{{{V_{in}}}} = \\frac{{{R_2}}}{{{R_1}}}\\\\\\ = \\frac{{1000}}{{100}}\\\\\\ = 10\\end{array}\\\\)\n\nThe output voltage is,\n\n\\\\(\\begin{array}{l}{V_{out}} = 10{V_{in}}\\\\\\ = 10 \\times 0.01\\\\\\ = 0.1V\\end{array}\\\\)\n\nThe output voltage is \\\\(0.1V\\\\).",
        "format": "markdown",
        "sha256": "5cbb94b38d6c0cb158749467cc47e89c9dba968ec562bbde33dc7a1313d85166"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer ignores the MOS source-follower topology and invents a resistor-ratio gain and output voltage. It gives none of the required positive, near-unity gain behavior.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 147,
        "total_tokens": 1789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 147,
        "total_tokens": 1789,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given circuit is a combination of two MOSFETs.\n\nThe input voltage is $Vin$.\n\nThe output voltage is $Vout$.\n\nThe voltage at the base of the second MOSFET is $Vb$.\n\nThe voltage at the drain of the first MOSFET is $VDD$.\n\nThe first MOSFET is an NMOS.\n\nThe second MOSFET is a PMOS.\n\nThe first MOSFET is in saturation.\n\nThe second MOSFET is in the linear region.\n\nThe threshold voltage of the first MOSFET is $Vtn$.\n\nThe threshold voltage of the second MOSFET is $Vtp$.\n\nThe transconductance parameter of the first MOSFET is $Kn$.\n\nThe transconductance parameter of the second MOSFET is $Kp$.\n\nThe drain current of the first MOSFET is $I{D}_{1}$.\n\nThe drain current of the second MOSFET is $I{D}_{2}$.\n\nThe drain current of the first MOSFET is equal to the drain current of the\nsecond MOSFET.\n\n$I{D}_{1}=I{D}_{2}$  \n\n\n## Determine the formulas of drain current and output voltage\n\nThe equation for the drain current of the first MOSFET is given by,\n\n$I{D}_{1}=Kn{\\left(Vin-Vtn\\right)}^{2}$ …… (1)\n\nHere, $Kn$is the transconductance parameter of the first MOSFET, $Vin$is the\ninput voltage, and $Vtn$is the threshold voltage of the first MOSFET.\n\nThe equation for the drain current of the second MOSFET is given by,\n\n$I{D}_{2}=Kp\\left[\\left(Vb-Vtp\\right)Vout-\\frac{1}{2}{Vout}^{2}\\right]$ …… (2)\n\nHere, $Kp$is the transconductance parameter of the second MOSFET, $Vb$is the\nvoltage at the base of the second MOSFET, $Vtp$is the threshold voltage of the\nsecond MOSFET, and $Vout$is the output voltage.\n\nThe equation for the output voltage is given by,\n\n$Vout=\\frac{Kn}{Kp}\\left(Vin-Vtn\\right)+Vtp$ …… (3)\n\n\n## Determine the output voltage\n\nCalculate the drain current of the first MOSFET.\n\nSubstitute $Kn$for $Kn$, $Vin$for $Vin$, and $Vtn$for $Vtn$in the equation\n(1).\n\n$I{D}_{1}=Kn{\\left(Vin-Vtn\\right)}^{2}$\n\nCalculate the drain current of the second MOSFET.\n\nSubstitute $Kp$for $Kp$, $Vb$for $Vb$, $Vtp$for $Vtp$, and $Vout$for $Vout$in\nthe equation (2).\n\n$I{D}_{2}=Kp\\left[\\left(Vb-Vtp\\right)Vout-\\frac{1}{2}{Vout}^{2}\\right]$\n\nCalculate the output voltage.\n\nSubstitute $Kn$for $Kn$, $Kp$for $Kp$, $Vin$for $Vin$, $Vtn$for $Vtn$, and\n$Vtp$for $Vtp$in the equation (3).\n\n$Vout=\\frac{Kn}{Kp}\\left(Vin-Vtn\\right)+Vtp$\n\nTherefore, the output voltage is $Vout=\\frac{Kn}{Kp}\\left(Vin-Vtn\\right)+Vtp$\n\nThe output voltage is $Vout=\\frac{Kn}{Kp}\\left(Vin-Vtn\\right)+Vtp$.",
        "format": "markdown",
        "sha256": "4c7a7c2d34ae72aaaa03af28e6058a5817d69fca2e846d01899307e10349dede"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2 as a PMOS and treats it as a linear-region device, then gives an unrelated DC output formula. It misses the source-follower topology and the positive, near-unity gain.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 805,
        "total_tokens": 2447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 805,
        "total_tokens": 2447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given data in the circuit is:\n\n  * Two diodes are connected in parallel.\n  * Two diodes are connected in series.\n\n\n## Concept\n\nThe diode equation gives the current flow in the diode.\n\n\\\\({I_{diode}} = {I_s}\\left( {{e^{\\frac{{q{V_{diode}}}}{{kT}}}} - 1} \\right)\\\\)\n\nHere,\\\\({I_s}\\\\)is the reverse saturation current,\\\\(q\\\\)is the charge on the\nelectron,\\\\({V_{diode}}\\\\)is the voltage across the diode,\\\\(k\\\\)is the\nBoltzmann constant, and\\\\(T\\\\)is the temperature.\n\n\n## Calculate the current in the circuit\n\nThe diodes are connected in parallel, and the current in the circuit is\ncalculated as:\n\n\\\\(\\begin{array}{c}{I_{diode}} = {I_{s1}}\\left( {{e^{\\frac{{q{V_{in}}}}{{kT}}}}\n- 1} \\right) + {I_{s2}}\\left( {{e^{\\frac{{q{V_{in}}}}{{kT}}}} - 1}\n\\right)\\\\\\\\{I_{diode}} = \\left( {{I_{s1}} + {I_{s2}}} \\right)\\left(\n{{e^{\\frac{{q{V_{in}}}}{{kT}}}} - 1} \\right)\\end{array}\\\\)\n\nThe diodes are connected in series, and the current in the circuit is\ncalculated as:\n\n\\\\(\\begin{array}{c}{I_{diode}} = {I_s}\\left( {{e^{\\frac{{q{V_{in}}}}{{2kT}}}}\n- 1} \\right)\\\\\\ = {I_s}\\left( {{e^{\\frac{{q{V_{in}}}}{{kT}}}} - 1}\n\\right)\\end{array}\\\\)\n\nThe current in the circuit is \\\\({I_{diode}} = {I_s}\\left(\n{{e^{\\frac{{q{V_{in}}}}{{kT}}}} - 1} \\right)\\\\).\n\nThe current in the circuit is \\\\({I_{diode}} = {I_s}\\left(\n{{e^{\\frac{{q{V_{in}}}}{{kT}}}} - 1} \\right)\\\\).",
        "format": "markdown",
        "sha256": "bcd2d9ee1bbcb32c385c430345dc7c2e5d30eea928d91dfcd65a83126502fcb5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer describes a diode circuit unrelated to the figure and does not identify the source follower or its positive, near-unity gain.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 499,
        "total_tokens": 2141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 499,
        "total_tokens": 2141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows two diodes connected in series with a voltage source and a load resistor. The diodes are connected in opposite directions, with one diode forward-biased and the other reverse-biased. This configuration is known as a diode clamp or diode limiter circuit. The forward-biased diode will conduct current when the input voltage exceeds a certain threshold, while the reverse-biased diode will block current flow in the opposite direction. The output voltage will be clamped to a voltage level determined by the forward voltage drop of the forward-biased diode and the voltage divider formed by the two diodes and the load resistor.",
        "format": "markdown",
        "sha256": "4850674cba0d9a8994f845c8a587cb801eff36546581254345e4a25899af6b79"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a CMOS inverter with one NMOS pull-down and one PMOS pull-up, not a diode clamp. The answer misidentifies the topology and device types.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 125,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 125,
        "total_tokens": 1767,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows two diodes connected in series with a voltage source and an output terminal. Diode M1 is forward biased, allowing current to flow through it, while diode M2 is reverse biased, blocking current flow. The output voltage Vout will be equal to the input voltage Vin minus the voltage drop across diode M1.",
        "format": "markdown",
        "sha256": "aa3e4572d3c4e1235d64b3816309695a887aaea2339e5ffb5aff1d7f37ac43c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misidentifies the CMOS inverter as a series-diode circuit and gives an incorrect account of its topology and operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 67,
        "total_tokens": 1709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 67,
        "total_tokens": 1709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit is an inverting amplifier with a DC-coupled input. The input voltage is applied to the inverting input of the op-amp through resistor $ {R}_{1}$, while the non-inverting input is connected to ground. The feedback network consists of resistor $ {R}_{2}$ and capacitor $ {C}_{1}$, which sets the gain and frequency response of the amplifier. The output voltage is taken from the output of the op-amp. The circuit has a virtual ground at the inverting input, which means that the voltage at this point is held at zero volts by the op-amp. This allows for easy calculation of the input and output voltages using Ohm's law and the gain equation for an inverting amplifier.",
        "format": "markdown",
        "sha256": "5293dd20df42788ae4d835289d4b4c674017c7079ddcc89fc78b3c74b27e85b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a CMOS inverter with complementary NMOS and PMOS devices, not an op-amp circuit. The answer misidentifies the topology and its components.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 158,
        "total_tokens": 1800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 158,
        "total_tokens": 1800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows two diodes connected in series with a voltage source and a load resistor. When the input voltage is positive, diode D1 is forward biased and conducts, while diode D2 is reverse biased and does not conduct. This results in a voltage drop across D1 and a current flowing through the load resistor. When the input voltage is negative, diode D2 is forward biased and conducts, while diode D1 is reverse biased and does not conduct. This results in a voltage drop across D2 and a current flowing through the load resistor in the opposite direction. The output voltage is therefore a rectified version of the input voltage, with positive and negative halves of the waveform separated by the diodes.",
        "format": "markdown",
        "sha256": "2ee5caa26d3a2416b5c73a9873d320605dedb1ff622c5869af1ac6d3b144e625"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a diode rectifier rather than recognizing the two NMOS devices, so its analysis does not apply to the figure.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 142,
        "total_tokens": 1848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 142,
        "total_tokens": 1848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows two diodes connected in series with a voltage source and a load resistor. When the input voltage is positive, diode D1 is forward biased and conducts, while diode D2 is reverse biased and does not conduct. This results in the output voltage being equal to the input voltage minus the voltage drop across D1. When the input voltage is negative, diode D2 is forward biased and conducts, while diode D1 is reverse biased and does not conduct. This results in the output voltage being equal to the negative of the input voltage minus the voltage drop across D2. Therefore, the circuit acts as a full-wave rectifier, converting an AC input voltage into a pulsating DC output voltage.",
        "format": "markdown",
        "sha256": "e0c6062b0db7dff30ac26cfd780116befb8088993582f12d5712328dd8548b09"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer describes a diode rectifier rather than the two-NMOS circuit. Misidentifying the devices triggers the golden solution’s zero-score rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 142,
        "total_tokens": 1848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 142,
        "total_tokens": 1848,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shows two diodes connected in series with a resistor and a voltage source. The diodes are connected in opposite directions, forming a diode pair. The voltage across the diode pair is equal to the sum of the voltage drops across each diode. The current through the circuit is determined by the voltage source and the resistance of the resistor. The diodes allow current to flow in one direction only, so the current through the circuit will be zero if the voltage source is reversed.",
        "format": "markdown",
        "sha256": "0f8f5411bd32fdae219afb22f90e67811efcd8d9b735aac413b2ef3496b3bb69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify the two NMOS devices or their source-follower and pull-down actions; it describes an unrelated diode circuit.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 97,
        "total_tokens": 1803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 97,
        "total_tokens": 1803,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe input voltage is $ {V}_{in}=-0.5V$.\n\nThe threshold voltage is $ {V}_{DD}=1V$.\n\n\n## Definition of diode\n\nA diode is a two-terminal electronic component with asymmetric\nconduction; current flows in one direction but not the other.\n\n\n## Draw the circuit\n\nThe circuit diagram is shown below.\n\n[Capture_N2.PNG]\n\nThe diode is forward biased, and the voltage across the diode is $\n{V}_{DD}=1V$.\n\nThe output voltage is $ {V}_{out}={V}_{DD}-{V}_{in}$.\n\nSubstitute the values in the above equation.\n\n$ \\begin{array}{rcl}{V}_{out}& =& 1V-\\left(-0.5V\\right)\\\\\\ & =& 1.5V\\\\\\\n& & \\end{array}$\n\nThus, the output voltage is $ 1.5V$.\n\nThe output voltage is $ 1.5V$.",
        "format": "markdown",
        "sha256": "3c9b93a74835696145083deae75177d635725cd56920461d09c2c2eecfdbbfc9"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the MOSFET circuit as an ideal diode and invents input and threshold values, producing an unsupported output voltage. It does not identify the common-source stage or its inverting gain.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3412,
        "output_tokens": 5331,
        "total_tokens": 8743,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 211,
        "total_tokens": 1917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Given Circuit\n\nThe given circuit consists of two diodes, and the input voltage is applied across the two diodes. The output voltage is taken across the second diode.\n\n\n## Step 2: Determine the diode state\n\nWhen the input voltage is positive, the diode M1 is forward biased, and the diode M2 is reverse biased. When the input voltage is negative, the diode M1 is reverse biased, and the diode M2 is forward biased.\n\nTherefore, the diode M1 is forward biased when the input voltage is positive, and the diode M2 is forward biased when the input voltage is negative.\n\n\n## Step 3: Determine the output voltage\n\nWhen the input voltage is positive, the output voltage is equal to the input voltage minus the voltage drop across the diode M1. When the input voltage is negative, the output voltage is equal to the input voltage minus the voltage drop across the diode M2.\n\nTherefore, the output voltage is equal to the input voltage minus the voltage drop across the forward-biased diode.\n\nThe diode M1 is forward biased when the input voltage is positive, and the diode M2 is forward biased when the input voltage is negative. The output voltage is equal to the input voltage minus the voltage drop across the forward-biased diode.",
        "format": "markdown",
        "sha256": "c44be30e3ad4b0cb26f317e6b3cb1c417b11070840f8a7bdcf97714973a3e29c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the MOSFET stage as two ordinary diodes and gives an unrelated bias/output analysis. It identifies neither the common-source topology nor its inverting gain.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 262,
        "total_tokens": 1968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 262,
        "total_tokens": 1968,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information.  The given circuit is;  [21a_X9X00XU.PNG]  ## Step 2. Analyzing the circuit.  The diode in the given circuit is forward biased, so the voltage drop across the diode is;  $V=0.7V$  The current through the circuit is;$ {I}_{1}=\\frac{{V}_{in}-V}{{R}_{1}}$  The output voltage is;$ {V}_{out}={I}_{1}{R}_{2}$  ## Step 3. Final value.  The output voltage is;$ {V}_{out}={I}_{1}{R}_{2}$\n\nThe output voltage is;$ {V}_{out}={I}_{1}{R}_{2}$",
        "format": "markdown",
        "sha256": "454f6ef78b4a1cf71a9d33472fbb8c59d90f625c8285fe7a0543bbab276198d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer analyzes an unrelated diode-and-resistor circuit and does not identify the common-source NMOS stage, diode-connected PMOS load, or its inverting gain.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 166,
        "total_tokens": 1872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1706,
        "output_tokens": 166,
        "total_tokens": 1872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe input voltage is ${{V}_{in}}$.\n\nThe output voltage is ${{V}_{out}}$.\n\nThe diodes are ${{M}_{1}}$and ${{M}_{2}}$.\n\nThe supply voltage is ${{V}_{DD}}$.\n\nThe ground is ${{V}_{gnd}}$.\n\n\n## Determine the formulas of drain current and output voltage\n\nThe formula of the drain current of the transistor is given by,\n\n${{\\text{I}}_{\\text{D}}}\\text{=K(}{{\\text{V}}_{\\text{GS}}}\\text{-}{{\\text{V}}_{\\text{T}}}\\text{}{{\\text{)}}^{\\text{2}}}$  \n\nHere, ${{\\text{V}}_{\\text{GS}}}$is the voltage between gate and source, ${{\\text{V}}_{\\text{T}}}$is the threshold voltage and K is the constant.\n\nThe formula of the output voltage is given by,\n\n${{\\text{V}}_{\\text{out}}}\\text{=-}{{\\text{I}}_{\\text{D}}}\\text{R}$  \n\nHere, ${{\\text{I}}_{\\text{D}}}$is the drain current and R is the resistance.\n\n\n## Draw the diagram and calculate the output voltage\n\nThe circuit diagram is drawn below,\n\n[Capture_1_y11111111111111111111111111111111.PNG]\n\nThe drain current of the transistor ${{M}_{1}}$is given by,\n\n${{\\text{I}}_{\\text{D}}}\\text{=K(}{{\\text{V}}_{\\text{GS}}}\\text{-}{{\\text{V}}_{\\text{T}}}\\text{}{{\\text{)}}^{\\text{2}}}$  \n\nHere, ${{\\text{V}}_{\\text{GS}}}\\text{=-}{{\\text{V}}_{\\text{in}}}$and ${{\\text{V}}_{\\text{T}}}$is the threshold voltage.\n\nSubstitute $-Vin$for ${{V}_{GS}}$in the above equation.\n\n${{\\text{I}}_{\\text{D}}}\\text{=K(-}{{\\text{V}}_{\\text{in}}}\\text{-}{{\\text{V}}_{\\text{T}}}\\text{}{{\\text{)}}^{\\text{2}}}$  \n\nThe output voltage is given by,\n\n${{\\text{V}}_{\\text{out}}}\\text{=-}{{\\text{I}}_{\\text{D}}}\\text{R}$  \n\nHere, ${{\\text{I}}_{\\text{D}}}$is the drain current and R is the resistance.\n\nSubstitute $K(-{{V}_{in}}-{{V}_{T}})2$for ${{I}_{D}}$in the above equation.\n\n${{\\text{V}}_{\\text{out}}}\\text{=-K(-}{{\\text{V}}_{\\text{in}}}\\text{-}{{\\text{V}}_{\\text{T}}}\\text{}{{\\text{)}}^{\\text{2}}}\\text{R}$  \n\nTherefore, the output voltage is ${{\\text{V}}_{\\text{out}}}\\text{=-K(-}{{\\text{V}}_{\\text{in}}}\\text{-}{{\\text{V}}_{\\text{T}}}\\text{}{{\\text{)}}^{\\text{2}}}\\text{R}$.\n\nThe output voltage is ${{\\text{V}}_{\\text{out}}}\\text{=-K(-}{{\\text{V}}_{\\text{in}}}\\text{-}{{\\text{V}}_{\\text{T}}}\\text{}{{\\text{)}}^{\\text{2}}}\\text{R}$.",
        "format": "markdown",
        "sha256": "f32cfefa1a1b683cb8c71737722419bd84fb1ce9afa75ef205cfef3277aa7d64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as having diodes and a resistor, applies an inapplicable NMOS-style current formula, and misses the two-PMOS common-source stage with a diode-connected PMOS load and gain of approximately -gm2/gm1.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 733,
        "total_tokens": 2343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 733,
        "total_tokens": 2343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given circuit is,\n\n[Capture_11.JPG]\n\nThe voltage at the input is, $ {V}_{in}=-10V$.\n\nThe voltage at the output is, $ {V}_{out}=0V$.\n\n\n## Step 2:\n\nThe voltage at the input is, $ {V}_{in}=-10V$.\n\nThe voltage at the output is, $ {V}_{out}=0V$.\n\nThe diode $ {M}_{1}$ is forward biased and the diode $ {M}_{2}$ is reverse biased.\n\nThe output voltage is, $ {V}_{out}=0V$.\n\nHence, the output voltage is $ {V}_{out}=0V$.\n\nThe output voltage is $ {V}_{out}=0V$.",
        "format": "markdown",
        "sha256": "9fc4f75b618102a9e99a474bc2e91872589fcf4447acd76381396889b5615aee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer invents fixed input and output voltages and mischaracterizes the PMOS devices as forward- and reverse-biased diodes. It misses the common-source PMOS input stage, diode-connected PMOS load, and gm/gm gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 166,
        "total_tokens": 1776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 166,
        "total_tokens": 1776,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information  We have a circuit and two diodes.  ## Step 2. Analyzing the circuit  As we can see in the circuit, the diode M1 is reverse biased and the diode M2 is forward biased.  Therefore, the diode M1 will act as an open switch and the diode M2 will act as a closed switch.  Hence, the output voltage will be equal to the input voltage.  Vout=Vin\n\nThe output voltage is equal to the input voltage.",
        "format": "markdown",
        "sha256": "c0f19c1ddd2635bc151cc7082952fb1b06580a3717f2ac8a5cae42f539cb140a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the PMOS devices as ordinary diodes and incorrectly concludes that Vout equals Vin. It misses the common-source input device, diode-connected PMOS load, and gm/gm gain.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 108,
        "total_tokens": 1718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1610,
        "output_tokens": 108,
        "total_tokens": 1718,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Determine the formulas of resistances\n\nConsider the formula of the parallel resistance is:\n\n\\\\({R_{parallel}} = \\frac{{{R_1}{R_2}}}{{{R_1} + {R_2}}}\\\\)\n\nHere,\\\\({R_1}\\\\)and\\\\({R_2}\\\\)are the resistances.\n\n\n## Determine the output resistance\n\nThe output resistance of the circuit is the parallel combination of the\nresistance\\\\({M_1}\\\\)and\\\\({M_2}\\\\).\n\n\\\\({R_{out}} = \\frac{{{M_1}{M_2}}}{{{M_1} + {M_2}}}\\\\)\n\nTherefore, the output resistance of the circuit is\\\\(\\frac{{{M_1}{M_2}}}{{{M_1}\n+ {M_2}}}\\\\).\n\nThe output resistance of the circuit is \\\\(\\frac{{{M_1}{M_2}}}{{{M_1} +\n{M_2}}}\\\\).",
        "format": "markdown",
        "sha256": "9cb45d265dab88f9aeda43d0bb4ca50711184f6e1c5667f3b276f373768223e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly treats M1 and M2 as resistors in parallel. It misses the cascode topology and the output resistance, which is approximately gm1·ro1·ro2.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 203,
        "total_tokens": 1844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 203,
        "total_tokens": 1844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Determine the formulas of resistances\n\nConsider the formula for the total resistance in parallel connection:\n\n\\\\({R_{total}} = \\frac{{{R_1}{R_2}}}{{{R_1} + {R_2}}}\\\\)\n\nConsider the formula for the total resistance in series connection:\n\n\\\\({R_{total}} = {R_1} + {R_2}\\\\)\n\n\n## Determine the output resistance\n\nThe output resistance is the resistance that is seen at the output terminals. The\noutput resistance is the parallel combination of the resistances\\\\({M_1}\\\\)and\n\\\\({M_2}\\\\).\n\n\\\\(\\begin{aligned}{c}{R_{out}} = \\frac{{{M_1}{M_2}}}{{{M_1} + {M_2}}}\\\\\\ =\n\\frac{{100 \\times 200}}{{100 + 200}}\\\\\\ = 66.67\\Omega \\end{aligned}\\\\)\n\nTherefore, the output resistance is \\\\(66.67\\Omega \\\\).\n\nThe output resistance is \\\\(66.67\\Omega \\\\).",
        "format": "markdown",
        "sha256": "f5ee45514a9950f65461ac8c3be152778455e41d8269b800523bdb4f219843d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats the transistors as two resistors in parallel and invents numerical values, missing the PMOS cascode topology and its output-resistance mechanism.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 236,
        "total_tokens": 1877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 236,
        "total_tokens": 1877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Determine the formulas of resistances  The formula to calculate the total resistance of the series connection is given by,  R=R1+R2    The formula to calculate the total resistance of the parallel connection is given by,  1R=1R1+1R2    ## Determine the Rout  The resistors M1and M2are connected in parallel. So, the equivalent resistance is given by,  1R1=1M1+1M2R1=M1M2M1+M2    The resistor R1is connected in series with the resistor VDD. So, the equivalent resistance is given by,  Rout=R1+VDD=M1M2M1+M2+VDD    Therefore, the output resistance is M1M2M1+M2+VDD.\n\nThe output resistance is M1M2M1+M2+VDD.",
        "format": "markdown",
        "sha256": "97ad0a1596b171fbeaf387676e9190bc818db9009bb88ef3263526d20f315b21"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer treats M1 and M2 as resistors in parallel and VDD as a series resistance, so it misses the cascode topology and gives no valid expression for Rout.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 195,
        "total_tokens": 1836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1641,
        "output_tokens": 195,
        "total_tokens": 1836,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that M2 is in saturation, we need to make sure that the voltage at the drain of M2 is greater than the voltage at the source of M2 plus the threshold voltage of M2. This can be achieved by ensuring that the voltage at the gate of M2 is greater than the voltage at the source of M2 plus the threshold voltage of M2. In this case, the voltage at the gate of M2 is VDD, and the voltage at the source of M2 is Vb2. Therefore, we need to ensure that VDD > Vb2 + Vth, where Vth is the threshold voltage of M2.",
        "format": "markdown",
        "sha256": "110f83d72c8a9005a4162a77a6a30abb9d1a3b7ec35384916ad2cb8dd45dcea7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2’s gate and source and applies an incorrect saturation condition. It also misses that M2 is PMOS and that its drain voltage is set by Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1648,
        "output_tokens": 135,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1648,
        "output_tokens": 135,
        "total_tokens": 1783,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that M2 is in saturation, we need to make sure that the voltage at the drain of M2 is greater than the voltage at the source of M2 plus the threshold voltage of M2. This can be achieved by ensuring that the voltage at the gate of M2 is greater than the voltage at the source of M2 plus the threshold voltage of M2. In this case, the voltage at the gate of M2 is VDD, and the voltage at the source of M2 is Vb2. Therefore, we need to ensure that VDD > Vb2 + Vth, where Vth is the threshold voltage of M2. This condition ensures that M2 is in saturation and can provide a high output current.",
        "format": "markdown",
        "sha256": "9521b044d12ce611340d22da933326ef788efd087fd36bd57c6622033f026e40"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2's terminals: its source is at VDD, its gate is at Vb2, and its drain is at X. It gives no valid saturation condition involving X or the control through Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1648,
        "output_tokens": 152,
        "total_tokens": 1800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1648,
        "output_tokens": 152,
        "total_tokens": 1800,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that M2 is in saturation, we need to make sure that the voltage at the drain of M2 is greater than the voltage at the source of M2 plus the threshold voltage of M2. This can be achieved by ensuring that the voltage at the gate of M2 is greater than the voltage at the source of M2 plus the threshold voltage of M2. In this case, the voltage at the gate of M2 is VDD, and the voltage at the source of M2 is Vb2. Therefore, we need to ensure that VDD > Vb2 + Vth, where Vth is the threshold voltage of M2. This condition ensures that M2 is in saturation and acts as a current source.",
        "format": "markdown",
        "sha256": "b3bc14309f81b5ee2bd9aa44aa067e921b42268ff56453aa9ea66b2766d5d7ac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It reverses M2’s source and gate connections and applies an incorrect saturation condition. It also misses that M1 sets VX and therefore the saturation constraint on M2.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1648,
        "output_tokens": 151,
        "total_tokens": 1799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1648,
        "output_tokens": 151,
        "total_tokens": 1799,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information  We have given the following circuit diagram :- [Capture_1.JPG]  ## Step 2. Simplifying the circuit  We have given the following circuit diagram :- [Capture_2.JPG]  Now from the given circuit, we can see that the diode is reverse biased. So it will act as open circuit. Then we can remove this diode from the circuit. Then we have the following circuit :- [Capture_3.JPG]  Now we can see that the two resistors are connected in series. So we can replace these two resistors by its equivalent resistance. Then we have the following circuit :- [Capture_4.JPG]  where _R_ is the equivalent resistance of the resistors _M1_ and _M2_.  ## Step 3. Final Conclusion  From the above circuit, we can see that the output voltage is equal to the input voltage.  That is _Vout=Vin_.  Hence the given circuit is a _voltage follower_ circuit.\n\nThe given circuit is a _voltage follower_ circuit.",
        "format": "markdown",
        "sha256": "fefe43da272eebfe7b81cf4313a95fa40e09556395a955f95a1c68cd4ef5e490"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the NMOS cascode gain stage as a diode-and-resistor voltage follower and gives no valid device-role or gain analysis.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 248,
        "total_tokens": 1826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 248,
        "total_tokens": 1826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given values are:\n\n\\\\(Vin = 10V\\\\)\n\n\\\\(Vout = 5V\\\\)\n\n\\\\(Vin = 10V\\\\)\n\n\\\\(Vout = 5V\\\\)\n\n\\\\(Vin = 10V\\\\)\n\n\\\\(Vout = 5V\\\\)\n\n\\\\(Vin = 10V\\\\)\n\n\\\\(Vout = 5V\\\\)\n\n\n## Definition of the diode\n\nA diode is a two-terminal electronic component with a single junction that conducts electricity in one direction while blocking it in the other.\n\n\n## Determine the current in the circuit\n\nThe diode is reverse biased, so it will act as an open circuit.\n\nThe current in the circuit is\n\n\\\\(\\begin{array}{l}I = \\frac{{Vin - Vout}}{{{R_1}}}\\\\\\I = \\frac{{10 - 5}}{{10}}\\\\\\I = 0.5A\\end{array}\\\\)\n\nThe current in the circuit is \\\\(0.5A\\\\).\n\nThe current in the circuit is \\\\(0.5A\\\\).",
        "format": "markdown",
        "sha256": "43b2104bc072f10a16fc6879361186ee12b0f1409e2ce6e5180ac5046e05a93c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not analyze the NMOS cascode stage; it invents voltage and resistor values and discusses an unrelated diode circuit.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 237,
        "total_tokens": 1815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 237,
        "total_tokens": 1815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given circuit is a diode circuit with two diodes connected in parallel.\n\n\n## Definition of diode\n\nA diode is an electronic device that only allows current to flow in one\ndirection. It is made up of a semiconductor material with two terminals, an\nanode and a cathode, and is commonly used in electronic circuits for\nrectification, signal modulation, and voltage regulation.\n\n\n## Analyzing the circuit\n\nThe circuit is a diode circuit with two diodes connected in parallel. The\noutput voltage is given by the equation:\n\n$ {V}_{out}={V}_{in}-{V}_{f}$\n\nWhere $ {V}_{f}$is the forward voltage drop of the diode. Since the diodes\nare connected in parallel, the forward voltage drop of each diode is the same.\n\nThe output voltage is also affected by the input voltage and the forward\nvoltage drop of the diodes. If the input voltage is greater than the forward\nvoltage drop of the diodes, the output voltage will be equal to the input\nvoltage minus the forward voltage drop. If the input voltage is less than the\nforward voltage drop of the diodes, the output voltage will be zero.\n\nTherefore, the output voltage of the circuit is given by:\n\n$ {V}_{out}=\\left\\\\{\\begin{array}{l}{V}_{in}-{V}_{f}\\text{if}{V}_{in}>{V}_{f}\\\\\\\n0\\text{if}{V}_{in}<{V}_{f}\\end{array}\\right\\\\}$\n\nWhere $ {V}_{f}$is the forward voltage drop of the diodes.\n\nThe output voltage of the circuit is given by: $\n{V}_{out}=\\left\\\\{\\begin{array}{l}{V}_{in}-{V}_{f}\\text{if}{V}_{in}>{V}_{f}\\\\\\\n0\\text{if}{V}_{in}<{V}_{f}\\end{array}\\right\\\\}$",
        "format": "markdown",
        "sha256": "b67c370f02a4ee55cb4aeb406b130f6c751fadaa9f6084e43e63108ead2572a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is an NMOS cascode gain stage, but the answer misidentifies it as parallel diodes and provides no relevant analysis.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 398,
        "total_tokens": 1976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1578,
        "output_tokens": 398,
        "total_tokens": 1976,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a cascode structure. It consists of two transistors, M1 and M2, connected in a specific configuration. The cascode structure offers several advantages, including improved gain, increased bandwidth, and reduced Miller effect. In this configuration, the input signal is applied to the gate of M1, while the output is taken from the drain of M2. The cascode structure is commonly used in RF and microwave applications due to its high-frequency performance and stability.",
        "format": "markdown",
        "sha256": "2e97be3b199d0220b9d127be28ca42351ced73687c34244bbc80c610e98ce223"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower, so the structure lacks the cascode resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1646,
        "output_tokens": 103,
        "total_tokens": 1749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1646,
        "output_tokens": 103,
        "total_tokens": 1749,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a cascode structure. It consists of two transistors, M1 and M2, connected in a specific configuration. The cascode structure offers several advantages, including improved gain, increased output resistance, and reduced Miller effect. It is commonly used in RF amplifiers and other high-frequency applications.",
        "format": "markdown",
        "sha256": "fd292429e79d1521d0c287dfb79d1486f7fb94a71ebb3079d48b373f178cab26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1646,
        "output_tokens": 68,
        "total_tokens": 1714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1646,
        "output_tokens": 68,
        "total_tokens": 1714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a cascode structure. It consists of two transistors, M1 and M2, connected in a specific configuration. The cascode structure offers several advantages, including improved gain, increased output resistance, and reduced Miller effect. It is commonly used in RF amplifiers and other high-frequency applications.",
        "format": "markdown",
        "sha256": "fd292429e79d1521d0c287dfb79d1486f7fb94a71ebb3079d48b373f178cab26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly calls the circuit a cascode; M1 is a PMOS source follower, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1646,
        "output_tokens": 68,
        "total_tokens": 1714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1646,
        "output_tokens": 68,
        "total_tokens": 1714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is a phenomenon that occurs in electronic circuits, particularly in common-emitter or common-source amplifiers, where the effective input capacitance is increased due to the interaction between the input and output through the Miller capacitance. This effect can significantly impact the high-frequency performance of the amplifier.\n\nIn a cascode amplifier, the Miller effect is less pronounced for several reasons:\n\n### 1. **Reduced Voltage Gain at the Input Stage:**\nIn a cascode amplifier, the input stage (common-emitter or common-source) is followed by a common-base or common-gate stage. The common-base/common-gate stage has a very low input impedance and a high output impedance. Because of this, the voltage gain of the input stage is significantly reduced when considering the overall gain from input to output. \n\nSince the Miller effect is directly related to the voltage gain (\\$A_v\\$) of the amplifier (the effective input capacitance is approximately \\(C_{Miller} = C_{gd} \\cdot (1 + A_v)\\)), a lower voltage gain at the input stage means a reduced Miller capacitance.\n\n### 2. **Isolation of the Input from the Output:**\nThe common-base or common-gate stage in the cascode configuration effectively isolates the input stage from the output stage. This isolation means that the variations in the output voltage have a much smaller effect on the input capacitance. \n\nIn a simple common-emitter or common-source amplifier, changes in the output voltage directly influence the input capacitance through the Miller capacitance. In a cascode, the common-base/common-gate stage buffers the input stage from these variations, thereby reducing the Miller effect.\n\n### 3. **High-Frequency Performance:**\nThe cascode configuration is known for its improved high-frequency performance. The common-base/common-gate stage provides a low-impedance node between the input and output, which helps in reducing the impact of parasitic capacitances and the Miller effect. This results in a wider bandwidth compared to a simple common-emitter or common-source amplifier.\n\n### Summary:\nThe Miller effect is less pronounced in a cascode amplifier because:\n- The voltage gain of the input stage is reduced.\n- The common-base/common-gate stage isolates the input from the output, minimizing the impact of output voltage variations on the input capacitance.\n- The overall high-frequency performance of the cascode is improved, leading to a reduced effective input capacitance.",
        "format": "markdown",
        "sha256": "8c26d920a055565ba2aad61f3e486d3c038d220b1c727d7c802b87d1fd6e21bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate stage’s low-impedance interstage node and the resulting reduction in gain across the input device’s Cgd, limiting Miller multiplication. It omits the approximate unity local gain (and factor-of-two Miller multiplier), but that detail does not change the core explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 509,
        "total_tokens": 522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 509,
        "total_tokens": 522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is a phenomenon that occurs in electronic circuits, particularly in common-emitter or common-source amplifiers, where the effective input capacitance is increased due to the multiplication of the capacitance between the input and output nodes by the gain of the amplifier. This effect can degrade the high-frequency performance of the amplifier.\n\nIn a cascode amplifier, the Miller effect is less pronounced for the following reasons:\n\n1. **Reduced Voltage Gain at the Input Stage**:\n   - In a cascode amplifier, the input stage (common-emitter or common-source) is followed by a common-base or common-gate stage. \n   - The common-base or common-gate stage has a very low input impedance and a high output impedance. This configuration reduces the overall voltage gain seen at the input stage.\n   - Since the Miller effect is proportional to the gain of the amplifier (specifically, the gain from the input to the output), a lower gain at the input stage means a reduced Miller capacitance.\n\n2. **Isolation of the Input Capacitance**:\n   - The common-base or common-gate stage in a cascode acts as a current buffer. It isolates the input capacitance of the first stage from the output node.\n   - This isolation means that the capacitance between the input and output nodes of the first stage does not get multiplied by the gain of the amplifier as significantly as it would in a simple common-emitter or common-source configuration.\n\n3. **Lower Effective Transconductance**:\n   - The cascode configuration effectively reduces the transconductance seen at the input, which in turn reduces the impact of the Miller effect. \n   - The common-base or common-gate stage has a high output impedance, which means that the current changes at the output do not significantly affect the voltage at the input of the first stage.\n\n4. **Frequency Response Improvement**:\n   - Because the Miller effect is reduced, the high-frequency performance of the cascode amplifier is improved. \n   - The input capacitance is less affected by the output voltage variations, leading to a flatter frequency response and better high-frequency characteristics.\n\nIn summary, the cascode configuration mitigates the Miller effect by reducing the effective gain at the input stage, isolating the input capacitance from the output node, and lowering the effective transconductance. This results in improved high-frequency performance compared to a simple common-emitter or common-source amplifier.",
        "format": "markdown",
        "sha256": "35b45c61131726622ec5fb6c6b6334741fd0b631ba1b9e14355c42b16a946fe1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer captures the qualitative role of the common-gate stage’s low input impedance in reducing the gain at the input transistor’s drain, so the main conclusion is right. It does not clearly identify the small gain across M1’s Cgd (roughly −1, giving a Miller factor around 2), and the claim that the cascode reduces effective input transconductance is misleading.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 498,
        "total_tokens": 511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 498,
        "total_tokens": 511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is a phenomenon that occurs in electronic circuits, particularly in common-emitter or common-source amplifiers, where the effective input capacitance is increased due to the interaction between the input and output through the Miller capacitance. This effect can significantly impact the high-frequency performance of the amplifier.\n\nIn a cascode amplifier, the Miller effect is less pronounced for several reasons:\n\n### 1. Reduced Voltage Gain at the Input Stage\nIn a cascode configuration, the amplifier is split into two stages:\n- The first stage is a common-emitter (or common-source) stage.\n- The second stage is a common-base (or common-gate) stage.\n\nThe common-base (or common-gate) stage has a very low input impedance and a high output impedance. Because of this, the voltage gain of the first stage (common-emitter or common-source) is significantly reduced when looking into the second stage. \n\nSince the Miller effect is proportional to the voltage gain (\\$A_v\\$) of the stage (\\$C_{Miller} = C_{gd} (1 + A_v)\\$), a lower voltage gain in the first stage means a reduced Miller capacitance.\n\n### 2. Isolation of the Input from the Output\nThe cascode configuration effectively isolates the input from the output. The common-base (or common-gate) stage acts as a current buffer, which means that the variations in the output voltage have minimal effect on the input stage. \n\nThis isolation reduces the feedback effect that causes the Miller capacitance to appear larger. In a traditional common-emitter or common-source stage, variations in the output voltage are directly coupled back to the input through the Miller capacitance, exacerbating the effect. In a cascode, this coupling is significantly diminished.\n\n### 3. Lower Input Capacitance\nBecause the common-base (or common-gate) stage has a very low input capacitance, the overall input capacitance seen at the input of the cascode amplifier is reduced. The dominant capacitance at the input is typically the gate-source capacitance (\\$C_{gs}\\$) of the first transistor, which is generally smaller than the Miller capacitance (\\$C_{gd}\\$) when amplified by the voltage gain in a single-stage amplifier.\n\n### Summary\n- **Reduced Voltage Gain**: The first stage has a lower voltage gain, reducing the Miller effect.\n- **Isolation**: The cascode structure isolates the input from the output, minimizing the feedback that enhances the Miller capacitance.\n- **Lower Input Capacitance**: The overall input capacitance is reduced due to the properties of the common-base (or common-gate) stage.\n\nTherefore, the Miller effect is less pronounced in a cascode amplifier, leading to improved high-frequency performance compared to a simple common-emitter or common-source amplifier.",
        "format": "markdown",
        "sha256": "e9ea537d408e87fb565f1344848652b28ebf7626056e6a20d1884f915106ac61"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the common-gate device’s low input impedance loads the first-stage output, reducing the gain across the input transistor’s Cgd and thus its Miller multiplication. The extra Cgs/input-capacitance generalizations are imprecise but do not undermine the central explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 580,
        "total_tokens": 593,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 13,
        "output_tokens": 580,
        "total_tokens": 593,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information  We have a circuit and some nodes in it.  ## Step 2. Concept used  We will first find the current in the circuit using the formula,  I=Vb2−Vb1R  Where, I is current, V is voltage and R is resistance.  After finding the current we will find the voltage at Vout using the formula,  Vout=Vin+I×R  Where, I is current, V is voltage and R is resistance.  ## Step 3. Calculation  We have given that  R=1000Ω  Vb2=10VVb1=0V  Now, find the current in the circuit.  I=Vb2−Vb1R=10−01000=0.01A  Now, find the voltage at Vout.  Vout=Vin+I×R=10+0.01×1000=20V\n\nThe voltage at Vout is 20V.",
        "format": "markdown",
        "sha256": "93ab2e2d40b17585fe642fbd38ba7a663335bdd3856d60a2b97eb9dc35e5cbc6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer invents a resistor-current calculation and does not identify or analyze the common-gate stage, its gain, or its input resistance.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 227,
        "total_tokens": 1869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 227,
        "total_tokens": 1869,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given circuit is,\n\n[Capture_18_10_2022.PNG]\n\nThe voltages are $ {V}_{b1}=-10V,{V}_{b2}=-5V,{V}_{DD}=10V$and the input voltage is$\n{V}_{in}=-1V$.\n\n\n## Concept\n\nThe diode is a two-terminal electronic component that conducts electricity\nprimarily in one direction. It has high resistance on one end and low\nresistance on the other.\n\n\n## Determine the output voltage\n\nThe diode is forward biased if the voltage at the cathode is more negative\nthan the voltage at the anode. Otherwise, it is reverse biased.\n\nThe diode $ {D}_{1}$is forward biased because the voltage at the cathode is\nmore negative than the voltage at the anode.\n\n$ \\begin{array}{rcl}{V}_{b1}-{V}_{in}& =& -10V-\\left(-1V\\right)\\\\\\ & =&\n-9V\\end{array}$\n\nThe diode $ {D}_{2}$is reverse biased because the voltage at the cathode is\nless negative than the voltage at the anode.\n\n$ \\begin{array}{rcl}{V}_{b2}-{V}_{DD}& =& -5V-10V\\\\\\ & =& -15V\\end{array}$\n\nThe output voltage is,\n\n$ \\begin{array}{rcl}{V}_{out}& =& {V}_{DD}\\\\\\ & =& 10V\\end{array}$\n\nHence, the output voltage is $ 10V$.\n\nThe output voltage is $ 10V$.",
        "format": "markdown",
        "sha256": "b54a1e3fbabf0a279baeb3e03219e80166a3507a709e2a153ae2f31ea2edb8e3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the MOS amplifier as a diode circuit and gives an unsupported output voltage; it does not analyze the common-gate stage, its gain, or its input resistance.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 351,
        "total_tokens": 1993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 351,
        "total_tokens": 1993,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Given data\n\nThe given circuit is,\n\n[Capture_1.PNG]\n\nThe voltages are\\\\({V_{in}} = 10\\;{\\rm{V}}\\\\),\\\\({V_{b1}} = 5\\;{\\rm{V}}\\\\),\\\\({V_{b2}} = 6\\;{\\rm{V}}\\\\)and\\\\({V_{DD}} = 15\\;{\\rm{V}}\\\\).\n\n\n## Concept\n\nMOSFETs are used as switches. When the voltage at the gate is higher than the\nsource, the MOSFET is on. When the voltage at the gate is lower than the\nsource, the MOSFET is off.\n\n\n## Determine the MOSFETs are on or off\n\nThe MOSFET M1 is off because the voltage at the gate is lower than the source.\n\nThe MOSFET M2 is on because the voltage at the gate is higher than the source.\n\nHence, M1 is off and M2 is on.\n\nThe MOSFET M1 is off and M2 is on.",
        "format": "markdown",
        "sha256": "8e8d5bcdcdfe2ba1b88fa33dbe88df17104f61268e28e9d9bae6f76e573555cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the task as a switch-state calculation, invents voltage values, and does not identify the common-gate topology, signal connection, gain, or input resistance.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 214,
        "total_tokens": 1856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 214,
        "total_tokens": 1856,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Determine the number of poles  The given circuit is a differential amplifier.  The differential amplifier has two input terminals and one output terminal.  Therefore, the differential amplifier has two poles.\n\nThe differential amplifier has two poles.",
        "format": "markdown",
        "sha256": "5730eb53c3a076f398cecef07044a91570b9dda3cd72fbefe3b978453dfd1009"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The count of two poles is correct, but the circuit is a common-source stage, not a differential amplifier, and the number of terminals does not determine the pole count. The justification misses the two independent capacitive nodes: the M1 gate and the output.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 46,
        "total_tokens": 2325,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 46,
        "total_tokens": 2325,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "1. **Identify the components in the circuit**:  The circuit contains two capacitors (CDB and CDB2), two resistors (Rs and M1), and two inductors (M2 and CGD2). Additionally, there are two voltage sources (Vin and Vout) and a current source (CGS).\n\n2. **Determine the number of poles in the circuit**:  Poles in a circuit are determined by the number of energy storage elements (capacitors and inductors) that can store energy. In this circuit, there are two capacitors and two inductors, which means there are four energy storage elements.\n\n3. **Conclude the number of poles**:  Since each energy storage element contributes one pole to the system, the circuit has a total of four poles.\n\nThe answer is 4",
        "format": "markdown",
        "sha256": "961c4a36c807569204024384a1ad492c86da29b89bde497959f894734be4f37f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies transistors and capacitors as inductors, resistors, and a current source, then incorrectly counts four poles. The circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 172,
        "total_tokens": 2451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 172,
        "total_tokens": 2451,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "1. **Identify the type of circuit**:  The circuit is a common-source amplifier with a common-gate stage. It includes transistors, capacitors, and resistors.\n\n2. **Determine the number of poles in the circuit**:  Poles in a circuit are determined by the number of reactive components (capacitors and inductors) that can store energy and affect the frequency response. In this circuit, there are three capacitors: C_GS, C_GD, and C_GD2. Each capacitor contributes a pole to the frequency response.\n\nThe answer is 3",
        "format": "markdown",
        "sha256": "781dae818d36eef6e0de88c84fadc0a1c9de079d38585f1211973a581908f7f7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the wrong pole count and incorrectly assigns one pole to each capacitor; the circuit has two poles because it has two independent capacitive nodes. It shows only minimal relevant understanding by recognizing that capacitances affect the frequency response.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 120,
        "total_tokens": 2399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2279,
        "output_tokens": 120,
        "total_tokens": 2399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Given Circuit\n\nThe given circuit consists of two MOSFETs, M1 and M2, connected in series with a resistor RD. The input voltage Vin is applied to the gate of M1, and the output voltage Vout is taken across RD. The drain of M1 is connected to the source of M2, and the drain of M2 is connected to the power supply VDD.\n\n## Step 2: Determine the operating region of M1\n\nTo determine the operating region of M1, we need to compare the input voltage Vin to the threshold voltage Vth of M1. If Vin > Vth, M1 will be in the saturation region, and if Vin < Vth, M1 will be in the cutoff region. Assuming that Vin > Vth, M1 will be in the saturation region.\n\n## Step 3: Determine the operating region of M2\n\nTo determine the operating region of M2, we need to compare the voltage at the drain of M1 (which is also the source of M2) to the threshold voltage Vth of M2. If the voltage at the drain of M1 is greater than Vth, M2 will be in the saturation region, and if it is less than Vth, M2 will be in the cutoff region. Assuming that the voltage at the drain of M1 is greater than Vth, M2 will be in the saturation region.\n\n## Step 4: Calculate the drain current of M1\n\nThe drain current of M1 in the saturation region can be calculated using the following equation: ID1 = (1/2) * Kn * (Vin - Vth)^2, where Kn is the transconductance parameter of M1.\n\n## Step 5: Calculate the drain current of M2\n\nThe drain current of M2 in the saturation region can be calculated using the following equation: ID2 = (1/2) * Kn * (VDD - Vth)^2, where Kn is the transconductance parameter of M2.\n\n## Step 6: Calculate the output voltage Vout\n\nThe output voltage Vout can be calculated using the following equation: Vout = VDD - ID2 * RD, where RD is the resistance of the resistor RD.\n\n## Step 7: Calculate the gain of the circuit\n\nThe gain of the circuit can be calculated using the following equation: Gain = dVout/dVin = -gm1 * RD, where gm1 is the transconductance of M1.\n\n## Step 8: Conclusion\n\nThe given circuit is a common-source amplifier with a current mirror load. The gain of the circuit is determined by the transconductance of M1 and the resistance of RD. The operating region of M1 and M2 depends on the input voltage Vin and the threshold voltage Vth of the MOSFETs.\n\nAnswer: The gain of the circuit is -gm1 * RD, where gm1 is the transconductance of M1 and RD is the resistance of the resistor RD. The operating region of M1 and M2 depends on the input voltage Vin and the threshold voltage Vth of the MOSFETs.",
        "format": "markdown",
        "sha256": "021dc1c721fa8b18288837a690e13a6d8c93eb85831d8f3797020f2cbc994c87"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misses the essential common-gate-drive, longer-effective-channel behavior and instead assigns the wrong operating region to M1, uses incorrect current equations, and misidentifies the circuit as having a current-mirror load.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 654,
        "total_tokens": 2831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 654,
        "total_tokens": 2831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information   We have to analyze the given circuit.  The given circuit is  [Capture_1.PNG]  ## Step 2. Analyzing the circuit  The given circuit is a differentiator circuit.  The output voltage is given by  $Vout=-RC\\frac{dVin}{dt}$  Here, $R=Rd$and $C=Cd$  So, the output voltage is  $Vout=-RdCd\\frac{dVin}{dt}$  The negative sign indicates that the output voltage is 180oout of phase with the input voltage.\n\nThe output voltage is$ Vout=-RdCd\\frac{dVin}{dt}$",
        "format": "markdown",
        "sha256": "6e58cf5d785e57bede1bed38a4ce30b08c5e9e0184a63ef682047b4cdca1f09f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is not a differentiator. The answer misses the series, common-gate NMOS structure and its key behavior as a transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 158,
        "total_tokens": 2335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 158,
        "total_tokens": 2335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Given Information\n\nGiven circuit is\n\n\n## Step 2: Simplify\n\nThe given circuit is a simple circuit with two diodes and two resistors.\n\nThe diodes are in parallel and the resistors are in series.\n\nThe output voltage is given by\n\n$ {V}_{out}={V}_{in}-{V}_{DD}$\n\nWhere $ {V}_{DD}$is the voltage drop across the diodes.\n\nThe voltage drop across the diodes is given by\n\n$ {V}_{DD}={V}_{T}ln\\left(\\frac{{I}_{D}}{{I}_{S}}\\right)$\n\nWhere $ {V}_{T}$is the thermal voltage, $ {I}_{D}$is the current through the\ndiodes and $ {I}_{S}$is the saturation current.\n\nThe current through the diodes is given by\n\n$ {I}_{D}=\\frac{{V}_{in}-{V}_{out}}{{R}_{1}+{R}_{2}}$\n\nSubstituting the values of $ {V}_{DD}$and $ {I}_{D}$in the equation for $\n{V}_{out}$, we get\n\n$ {V}_{out}={V}_{in}-{V}_{T}ln\\left(\\frac{{V}_{in}-{V}_{out}}{{R}_{1}+{R}_{2}{I}_{S}}\\right)$\n\nSolving for $ {V}_{out}$, we get\n\n$\n{V}_{out}=\\frac{{V}_{in}{R}_{1}+{V}_{T}ln\\left({I}_{S}\\right)}{{R}_{1}+{R}_{2}}$\n\nThe output voltage is given by\n\n$\n{V}_{out}=\\frac{{V}_{in}{R}_{1}+{V}_{T}ln\\left({I}_{S}\\right)}{{R}_{1}+{R}_{2}}$",
        "format": "markdown",
        "sha256": "4a290526521795fd5b4b9d8881c4ff62aeedc53f887634b56368ac7f7187dfa1"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as diodes and resistors and gives unrelated diode equations. It misses the series NMOS structure and the key result that the devices act approximately like one transistor with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 4354,
        "output_tokens": 5503,
        "total_tokens": 9857,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 383,
        "total_tokens": 2560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information.  The given circuit is:  [16.14.PNG]  ## Step 2. Analyze the circuit.  The current through the diode is,  \\\\(I = \\frac{{{V_{in}} - {V_{out}}}}{{{R_D}}}\\\\)  The current through the capacitor is,  \\\\(I = C\\frac{{d{V_{out}}}}{{dt}}\\\\)  Equate both the current equations.  \\\\(\\begin{align}C\\frac{{d{V_{out}}}}{{dt}} &= \\frac{{{V_{in}} - {V_{out}}}}{{{R_D}}}\\\\\\\\\\frac{{d{V_{out}}}}{{dt}} &= \\frac{1}{{{R_DC}}}\\left( {{V_{in}} - {V_{out}}} \\right)\\end{align}\\\\)  The above equation is a first-order linear differential equation.  The solution of the above equation is,  \\\\({V_{out}}(t) = {V_{in}}(1 - {e^{ - \\frac{t}{{{\\tau _0}}}}})\\\\)  Here, \\\\({\\tau _0} = {R_DC}\\\\)is the time constant.  The output voltage is,  \\\\({V_{out}}(t) = {V_{in}}(1 - {e^{ - \\frac{t}{{{\\tau _0}}}}})\\\\)  Here, \\\\({\\tau _0} = {R_DC}\\\\)is the time constant.\n\nThe output voltage is,  \\\\({V_{out}}(t) = {V_{in}}(1 - {e^{ - \\frac{t}{{{\\tau _0}}}}})\\\\)  Here, \\\\({\\tau _0} = {R_DC}\\\\)is the time constant.",
        "format": "markdown",
        "sha256": "8395c5d3490836d4901319f6ed14a98ac3ad16963f6baa778178d20ebac45120"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer analyzes an unrelated RC circuit and does not identify or analyze the source-coupled transistor circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 386,
        "total_tokens": 2028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 386,
        "total_tokens": 2028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information  We have to analyze the circuit.  The given circuit is: [Capture_e10111e.PNG]  ## Step 2. Analyzing the circuit  The given circuit is a differential amplifier circuit.  The output voltage of the differential amplifier is given by,  $Vout=\\frac{R}{2{R}_{E}}({V}_{2}-{V}_{1})$  Here,  $R=10000\\Omega,{R}_{E}=1000\\Omega,{V}_{2}=1.00V,{V}_{1}=0.99V$  ## Step 3. Analyzing the circuit  Now,  role=\"math\" localid=\"1648643006001\" $Vout=\\frac{R}{2{R}_{E}}({V}_{2}-{V}_{1})Vout=\\frac{10000}{2\\times 1000}(1.00-0.99)Vout=\\frac{10000}{2000}(0.01)Vout=5\\times 0.01Vout=0.05V$  \n\nThe output voltage of the differential amplifier is,$ Vout=0.05V$.",
        "format": "markdown",
        "sha256": "108a79f8a8db0c047906308418bd634826e8163e9b33aad9d21eb0965e98883a"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The generic “differential amplifier” label is only a limited match. The answer misses the source-coupled pair’s actual connections and invents resistor values and an output formula that do not apply to the shown circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3284,
        "output_tokens": 5408,
        "total_tokens": 8692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 288,
        "total_tokens": 1930,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information.  We have a circuit with two resistors and two inductors and a diode.  ## Step 2. Analyze the circuit.  When the diode is forward biased, the current flows through the circuit.  When the diode is reverse biased, the current does not flow through the circuit.  ## Step 3. Conclusion.  Therefore, the current flows through the circuit when the diode is forward biased and the current does not flow through the circuit when the diode is reverse biased.\n\nThe current flows through the circuit when the diode is forward biased and the current does not flow through the circuit when the diode is reverse biased.",
        "format": "markdown",
        "sha256": "4695aa2cb8fce86a61a58e47ea5b1fcbb0675186efeec35954bb8ffbaa6cf606"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer describes an unrelated diode circuit and does not identify or analyze the source-coupled MOS circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3284,
        "output_tokens": 5256,
        "total_tokens": 8540,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1642,
        "output_tokens": 136,
        "total_tokens": 1778,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the presence of the inductor (L) in the circuit. When a current flows through the inductor, it stores energy in a magnetic field. If the current through the inductor changes, the inductor resists the change by inducing a voltage in the opposite direction, according to Lenz's law. This inductive behavior can cause the output impedance of the circuit to have an inductive component, especially at higher frequencies where the inductive reactance (XL) becomes significant. The inductive reactance is given by XL = 2πfL, where f is the frequency and L is the inductance. As the frequency increases, the inductive reactance also increases, making the output impedance more inductive.",
        "format": "markdown",
        "sha256": "7d3abba33c6912df853e6cbb756e3f8637e329679bb5cd32ca5711769e7a0208"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly assumes a physical inductor is present. The inductive behavior comes from the frequency-dependent interaction of M1’s gate-source capacitance and RS, which makes Zout rise from about 1/gm1 toward RS when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 151,
        "total_tokens": 1944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 151,
        "total_tokens": 1944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the presence of the inductor (L) in the circuit. When a load is connected to the output, the inductor resists changes in current, causing a phase shift between the voltage and current. This phase shift results in an inductive output impedance, which can affect the circuit's performance and stability.",
        "format": "markdown",
        "sha256": "22d955cef04b2508cb0ed262dea1d7593393852a848ce3dd8b97b007e8ff6727"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit has no inductor; its inductive output impedance arises from the frequency-dependent interaction of RS and CGS1, which the answer misses.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 74,
        "total_tokens": 1867,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 74,
        "total_tokens": 1867,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the presence of the inductor (L) in the circuit. When a current flows through the inductor, it stores energy in a magnetic field. If the current through the inductor changes, the magnetic field collapses, inducing a voltage in the opposite direction to the change in current. This inductive behavior can cause the output impedance to appear inductive, especially at higher frequencies where the inductive reactance (XL = 2πfL) becomes significant. The inductive reactance increases with frequency, causing the output impedance to become more inductive as the frequency increases.",
        "format": "markdown",
        "sha256": "41ec9199d8785c8eae119ed70b0799766e423e607b1c513cdcb411c8d89403c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit has no inductor. The answer misses the source-follower mechanism: the output impedance rises from about 1/gm1 toward RS as CGS1 shorts the gate to the source, becoming inductive when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 123,
        "total_tokens": 1916,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1793,
        "output_tokens": 123,
        "total_tokens": 1916,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information  We have to analyze the circuit.  The circuit is  [Capture_001.PNG]  ## Step 2. Analyzing the circuit  We know that the current through the capacitor is zero.  So the current through the capacitor is$ {i}_{{c}_{1}}=0$  The current through the inductor is constant.  So the current through the inductor is$ {i}_{{L}_{1}}=0$  The current through the resistor is$ {i}_{{R}_{1}}={i}_{in}$  The current through the capacitor is$ {i}_{{c}_{2}}={i}_{in}$  The current through the inductor is$ {i}_{{L}_{2}}={i}_{in}$  The current through the resistor is$ {i}_{{R}_{2}}={i}_{in}$  ## Step 3. Analyzing the circuit  The voltage across the capacitor is$ {v}_{{c}_{1}}={v}_{out}$  The voltage across the inductor is$ {v}_{{L}_{1}}={v}_{out}$  The voltage across the resistor is$ {v}_{{R}_{1}}={v}_{out}$  The voltage across the capacitor is$ {v}_{{c}_{2}}={v}_{out}$  The voltage across the inductor is$ {v}_{{L}_{2}}={v}_{out}$  The voltage across the resistor is$ {v}_{{R}_{2}}={v}_{out}$  ## Step 4. Analyzing the circuit  The current through the capacitor is zero.  So the current through the capacitor is$ {i}_{{c}_{1}}=0$  The current through the inductor is constant.  So the current through the inductor is$ {i}_{{L}_{1}}=0$  The current through the resistor is$ {i}_{{R}_{1}}={i}_{in}$  The current through the capacitor is$ {i}_{{c}_{2}}={i}_{in}$  The current through the inductor is$ {i}_{{L}_{2}}={i}_{in}$  The current through the resistor is$ {i}_{{R}_{2}}={i}_{in}$  The voltage across the capacitor is$ {v}_{{c}_{1}}={v}_{out}$  The voltage across the inductor is$ {v}_{{L}_{1}}={v}_{out}$  The voltage across the resistor is$ {v}_{{R}_{1}}={v}_{out}$  The voltage across the capacitor is$ {v}_{{c}_{2}}={v}_{out}$  The voltage across the inductor is$ {v}_{{L}_{2}}={v}_{out}$  The voltage across the resistor is$ {v}_{{R}_{2}}={v}_{out}$\n\nThe current through the capacitor is zero.  So the current through the capacitor is$ {i}_{{c}_{1}}=0$  The current through the inductor is constant.  So the current through the inductor is$ {i}_{{L}_{1}}=0$  The current through the resistor is$ {i}_{{R}_{1}}={i}_{in}$  The current through the capacitor is$ {i}_{{c}_{2}}={i}_{in}$  The current through the inductor is$ {i}_{{L}_{2}}={i}_{in}$  The current through the resistor is$ {i}_{{R}_{2}}={i}_{in}$  The voltage across the capacitor is$ {v}_{{c}_{1}}={v}_{out}$  The voltage across the inductor is$ {v}_{{L}_{1}}={v}_{out}$  The voltage across the resistor is$ {v}_{{R}_{1}}={v}_{out}$  The voltage across the capacitor is$ {v}_{{c}_{2}}={v}_{out}$  The voltage across the inductor is$ {v}_{{L}_{2}}={v}_{out}$  The voltage across the resistor is$ {v}_{{R}_{2}}={v}_{out}$",
        "format": "markdown",
        "sha256": "6f0691e40e216b216aa3af425a3892169c3093563b35e58e00d3b423ff2f6a73"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not analyze the MOS positive-feedback circuit and instead invents capacitors, inductors, and resistors, missing the topology and its feedback behavior entirely.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 873,
        "total_tokens": 3050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 873,
        "total_tokens": 3050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Given Circuit\n\nThe given circuit consists of a voltage divider, a current source, and two capacitors.\n\n## Step 2: Concept of Voltage Divider Rule\n\nAccording to the voltage divider rule, the voltage across a resistor in a series circuit is proportional to the resistance value.\n\n## Step 3: Apply KCL at node X\n\nApplying KCL at node X, we get\n\n$ \\frac{{V}_{x}}{j\\omega {M}_{1}}+\\frac{{V}_{x}}{j\\omega {M}_{2}}+{I}_{in}=0\\phantom{\\rule{0ex}{0ex}}\\frac{{V}_{x}}{j\\omega\n{M}_{1}}+\\frac{{V}_{x}}{j\\omega {M}_{2}}=-{I}_{in}\\phantom{\\rule{0ex}{0ex}}\\frac{{V}_{x}}{j\\omega\n}\\left(\\frac{1}{{M}_{1}}+\\frac{1}{{M}_{2}}\\right)=-{I}_{in}\\phantom{\\rule{0ex}{0ex}}{V}_{x}=-j\\omega\n{I}_{in}\\left(\\frac{{M}_{1}{M}_{2}}{{M}_{1}+{M}_{2}}\\right)$\n\n## Step 4: Apply KVL at the output loop\n\nApplying KVL at the output loop, we get\n\n$ {V}_{out}={V}_{DD}-{V}_{x}\\phantom{\\rule{0ex}{0ex}}{V}_{out}={V}_{DD}+j\\omega\n{I}_{in}\\left(\\frac{{M}_{1}{M}_{2}}{{M}_{1}+{M}_{2}}\\right)$\n\nHence, the output voltage is\n\n$ {V}_{out}={V}_{DD}+j\\omega\n{I}_{in}\\left(\\frac{{M}_{1}{M}_{2}}{{M}_{1}+{M}_{2}}\\right)$\n\nThe output voltage is$\n{V}_{out}={V}_{DD}+j\\omega {I}_{in}\\left(\\frac{{M}_{1}{M}_{2}}{{M}_{1}+{M}_{2}}\\right)$",
        "format": "markdown",
        "sha256": "916641c43c0e87b9014f87e5e0b2316c874d920b3981af411b5a483ed779dfe4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the transistor circuit as a voltage divider with capacitors and gives unrelated equations. It misses the positive-feedback loop and the circuit’s instability or latching behavior.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 453,
        "total_tokens": 2630,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2177,
        "output_tokens": 453,
        "total_tokens": 2630,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Given Circuit\n\nThe given circuit consists of a voltage divider, a current source, and two capacitors.\n\n## Step 2: Concept of Voltage Divider Rule\n\nAccording to the voltage divider rule, the voltage across a resistor in a series circuit is proportional to the resistance value.\n\n## Step 3: Apply KCL at node X\n\nApplying KCL at node X, we get\n\n$ \\frac{{V}_{x}}{j\\omega {M}_{1}}+\\frac{{V}_{x}}{j\\omega {M}_{2}}+{I}_{in}=0\\phantom{\\rule{0ex}{0ex}}\\frac{{V}_{x}}{j\\omega\n{M}_{1}}+\\frac{{V}_{x}}{j\\omega {M}_{2}}=-{I}_{in}\\phantom{\\rule{0ex}{0ex}}{V}_{x}\\left(\\frac{1}{j\\omega\n{M}_{1}}+\\frac{1}{j\\omega {M}_{2}}\\right)=-{I}_{in}\\phantom{\\rule{0ex}{0ex}}{V}_{x}=\\frac{-{I}_{in}}{\\left(\\frac{1}{j\\omega\n{M}_{1}}+\\frac{1}{j\\omega {M}_{2}}\\right)}\\phantom{\\rule{0ex}{0ex}}{V}_{x}=\\frac{-{I}_{in}}{\\left(\\frac{1}{j\\omega\n{M}_{1}}+\\frac{1}{j\\omega {M}_{2}}\\right)}\\times \\frac{j\\omega\n{M}_{1}{M}_{2}}{j\\omega\n{M}_{1}{M}_{2}}\\phantom{\\rule{0ex}{0ex}}{V}_{x}=\\frac{-{I}_{in}j\\omega\n{M}_{1}{M}_{2}}{j\\omega\n{M}_{2}+j\\omega {M}_{1}}\\phantom{\\rule{0ex}{0ex}}{V}_{x}=\\frac{-{I}_{in}j\\omega\n{M}_{1}{M}_{2}}{j\\omega \\left({M}_{1}+{M}_{2}\\right)}\\phantom{\\rule{0ex}{0ex}}{V}_{x}=\\frac{-{I}_{in}{M}_{1}{M}_{2}}{\\left({M}_{1}+{M}_{2}\\right)}$\n\n## Step 4: Apply KVL at the output loop\n\nApplying KVL at the output loop, we get\n\n$ {V}_{out}={V}_{x}+{I}_{in}{R}_{D1}\\phantom{\\rule{0ex}{0ex}}{V}_{out}=\\frac{-{I}_{in}{M}_{1}{M}_{2}}{\\left({M}_{1}+{M}_{2}\\right)}+{I}_{in}{R}_{D1}\\phantom{\\rule{0ex}{0ex}}{V}_{out}={I}_{in}\\left({R}_{D1}-\\frac{{M}_{1}{M}_{2}}{\\left({M}_{1}+{M}_{2}\\right)}\\right)$\n\nHence, the output voltage is\n\n$ {V}_{out}={I}_{in}\\left({R}_{D1}-\\frac{{M}_{1}{M}_{2}}{\\left({M}_{1}+{M}_{2}\\right)}\\right)$\n\nThe output voltage is$\n{V}_{out}={I}_{in}\\left({R}_{D1}-\\frac{{M}_{1}{M}_{2}}{\\left({M}_{1}+{M}_{2}\\right)}\\right)$",
        "format": "markdown",
        "sha256": "1ac1baecb924aeb8fdb583501f61cbfcf621c00a2217317066652f776abc6a5c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the MOSFET circuit as a voltage divider with capacitors and does not recognize the positive-feedback loop or its consequences.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 0,
        "output_tokens": 0,
        "total_tokens": 0,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 0,
        "output_tokens": 0,
        "total_tokens": 0,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Kirchhoff’s voltage law  It states that the sum of voltage drops in a closed-loop circuit is equal to the sum of the external voltage supplied.  ## Determine the current in the circuit  The current in the circuit is,  \\\\(\\begin{align}{}{I_{in}} &= \\frac{{{V_{in}}}}{{{R_F}}}\\\\\\ &= \\frac{{10V}}{{1000\\Omega }}\\\\\\ &= 10mA\\end{align}\\\\)  The voltage across the capacitor is,  \\\\(\\begin{align}{}{V_C} &= {I_{in}}{R_1}\\\\\\ &= \\left( {10mA} \\right)\\left( {1000\\Omega } \\right)\\\\\\ &= 10V\\end{align}\\\\)  The voltage across the capacitor is equal to the input voltage. So, the diode is in reverse bias.  Therefore, the current in the circuit is \\\\(10mA\\\\).\n\nThe current in the circuit is \\\\(10mA\\\\).",
        "format": "markdown",
        "sha256": "b0bd7cc53ed3ccc994d7026be638bc50acb650cf972990ffa17cbdeb0d782433"
      },
      "model_call_count": 3,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer analyzes an unrelated resistor-capacitor/diode circuit and does not identify or analyze the transimpedance amplifier topology.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 7119,
        "output_tokens": 10467,
        "total_tokens": 17586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2373,
        "output_tokens": 227,
        "total_tokens": 2600,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 3,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Kirchhoff’s voltage law  It states that the sum of voltage drops in a closed-loop circuit is equal to the sum of the voltage sources.  ## Step 2: Kirchhoff’s current law  It states that the sum of the currents entering a node must be equal to the sum of the currents leaving the node, as the node cannot store charge.  ## Step 3: Apply Kirchhoff’s voltage law  The current through the resistor \\\\({R_F}\\\\) is given by  \\\\({i_{RF}} = \\frac{{{V_b}}}{{{R_F}}}\\\\)  The current through the resistor \\\\({R_{D1}}\\\\) is given by  \\\\({i_{{R_{D1}}}} = \\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}}\\\\)  The current through the resistor \\\\({R_{D2}}\\\\) is given by  \\\\({i_{{R_{D2}}}} = \\frac{{{V_{out}} - {V_b}}}{{{R_{D2}}}}\\\\)  The current through the resistor \\\\({R_F}\\\\) is given by  \\\\({i_{in}} = \\frac{{{V_b}}}{{{R_F}}}\\\\)  Apply Kirchhoff’s current law at node \\\\({V_b}\\\\)  \\\\(\\begin{array}{l}{i_{in}} + {i_{{R_{D1}}}} = {i_{{R_{D2}}}} + {i_{RF}}\\\\\\\\\\frac{{{V_b}}}{{{R_F}}} + \\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}} = \\frac{{{V_{out}} - {V_b}}}{{{R_{D2}}}} + \\frac{{{V_b}}}{{{R_F}}}\\\\\\\\\\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}} = \\frac{{{V_{out}} - {V_b}}}{{{R_{D2}}}}\\end{array}\\\\)  Therefore, the output voltage is given by  \\\\(\\begin{array}{l}{V_{out}} = {V_b} + \\frac{{{R_{D2}}}}{{{R_{D1}}}}\\left( {{V_{DD}} - {V_b}} \\right)\\\\\\\\{V_{out}} = {V_b}\\left( {1 - \\frac{{{R_{D2}}}}{{{R_{D1}}}}} \\right) + \\frac{{{R_{D2}}}}{{{R_{D1}}}}{V_{DD}}\\end{array}\\\\)\n\nThe output voltage is \\\\({V_{out}} = {V_b}\\left( {1 - \\frac{{{R_{D2}}}}{{{R_{D1}}}}} \\right) + \\frac{{{R_{D2}}}}{{{R_{D1}}}}{V_{DD}}\\\\).",
        "format": "markdown",
        "sha256": "6a4607022a644887e8dc053ace037dcb6500b37ff47c6d336210f8c06b70d2c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit connections and applies KCL at the fixed gate-bias node as though it were connected to the resistors. Its resistor-current equations ignore the transistor stages and feedback path, so the resulting output-voltage expression is unrelated to the transimpedance amplifier.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2373,
        "output_tokens": 611,
        "total_tokens": 2984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2373,
        "output_tokens": 611,
        "total_tokens": 2984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information.  The given figure is:  [11th.PNG]  ## Step 2. Concept Used.  The formula used to calculate the current is,  \\\\(I = \\frac{V}{R}\\\\)  Where,  Voltage is \\\\(V\\\\).  Current is \\\\(I\\\\).  Resistance is \\\\(R\\\\).  ## Step 3. Calculation for the current.  The current through the resistor \\\\({R_F}\\\\) is,  \\\\({I_F} = \\frac{{{V_b}}}{{{R_F}}}\\\\)  The current through the resistor \\\\({R_{D1}}\\\\) is,  \\\\({I_{D1}} = \\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}}\\\\)  The current through the resistor \\\\({R_{D2}}\\\\) is,  \\\\({I_{D2}} = \\frac{{{V_{DD}} - {V_{out}}}}{{{R_{D2}}}}\\\\)  The current through the resistor \\\\({R_F}\\\\) is,  \\\\({I_F} = \\frac{{{V_b}}}{{{R_F}}}\\\\)  The current through the resistor \\\\({R_{D1}}\\\\) is,  \\\\({I_{D1}} = \\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}}\\\\)  The current through the resistor \\\\({R_{D2}}\\\\) is,  \\\\({I_{D2}} = \\frac{{{V_{DD}} - {V_{out}}}}{{{R_{D2}}}}\\\\)  The current through the resistor \\\\({R_F}\\\\) is,  \\\\({I_F} = \\frac{{{V_b}}}{{{R_F}}}\\\\)  The current through the resistor \\\\({R_{D1}}\\\\) is,  \\\\({I_{D1}} = \\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}}\\\\)  The current through the resistor \\\\({R_{D2}}\\\\) is,  \\\\({I_{D2}} = \\frac{{{V_{DD}} - {V_{out}}}}{{{R_{D2}}}}\\\\)  ## Step 4. Calculation for the voltage.  The voltage across the resistor \\\\({R_F}\\\\) is,  \\\\({V_b} = {I_F}{R_F}\\\\)  The voltage across the resistor \\\\({R_{D1}}\\\\) is,  \\\\({V_{DD}} - {V_b} = {I_{D1}}{R_{D1}}\\\\)  The voltage across the resistor \\\\({R_{D2}}\\\\) is,  \\\\({V_{DD}} - {V_{out}} = {I_{D2}}{R_{D2}}\\\\)  The voltage across the resistor \\\\({R_F}\\\\) is,  \\\\({V_b} = {I_F}{R_F}\\\\)  The voltage across the resistor \\\\({R_{D1}}\\\\) is,  \\\\({V_{DD}} - {V_b} = {I_{D1}}{R_{D1}}\\\\)  The voltage across the resistor \\\\({R_{D2}}\\\\) is,  \\\\({V_{DD}} - {V_{out}} = {I_{D2}}{R_{D2}}\\\\)  ## Step 5. Conclusion.  Therefore, the current through the resistor \\\\({R_F}\\\\) is \\\\({I_F} = \\frac{{{V_b}}}{{{R_F}}}\\\\), the current through the resistor \\\\({R_{D1}}\\\\) is \\\\({I_{D1}} = \\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}}\\\\) and the current through the resistor \\\\({R_{D2}}\\\\) is \\\\({I_{D2}} = \\frac{{{V_{DD}} - {V_{out}}}}{{{R_{D2}}}}\\\\).\n\nTherefore, the current through the resistor \\\\({R_F}\\\\) is \\\\({I_F} = \\frac{{{V_b}}}{{{R_F}}}\\\\), the current through the resistor \\\\({R_{D1}}\\\\) is \\\\({I_{D1}} = \\frac{{{V_{DD}} - {V_b}}}{{{R_{D1}}}}\\\\) and the current through the resistor \\\\({R_{D2}}\\\\) is \\\\({I_{D2}} = \\frac{{{V_{DD}} - {V_{out}}}}{{{R_{D2}}}}\\\\).",
        "format": "markdown",
        "sha256": "6872190b974a92c5bb1250d231ac4fbac4e3f7d5a4111d33494987135066a33f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It does not identify the two-stage transimpedance topology or the feedback path. It incorrectly treats the bias voltage Vb as the voltage across RF and RD1, so its current calculations do not describe the circuit.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2373,
        "output_tokens": 977,
        "total_tokens": 3350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2373,
        "output_tokens": 977,
        "total_tokens": 3350,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Given data\n\nThe given circuit is shown in the figure below.\n\n  \n\n## Step 2: Determine the formulas:\n\nWrite the expression for the current in the circuit.\n\n\\\\({I_{in}} = \\frac{{{V_{in}}}}{{{Z_{in}}}}\\\\)\n\nHere,\\\\({Z_{in}}\\\\)is the input impedance of the circuit.\n\nWrite the expression for the input impedance of the circuit.\n\n\\\\({Z_{in}} = {Z_1} + {Z_2}\\\\)\n\nHere,\\\\({Z_1}\\\\)and\\\\({Z_2}\\\\)are the impedances of the circuit.\n\nWrite the expression for the output voltage of the circuit.\n\n\\\\({V_{out}} = {I_{in}}{Z_2}\\\\)\n\nHere,\\\\({I_{in}}\\\\)is the current in the circuit.\n\nWrite the expression for the voltage across the capacitor.\n\n\\\\({V_C} = {I_{in}}{X_C}\\\\)\n\nHere,\\\\({X_C}\\\\)is the capacitive reactance.\n\nWrite the expression for the voltage across the inductor.\n\n\\\\({V_L} = {I_{in}}{X_L}\\\\)\n\nHere,\\\\({X_L}\\\\)is the inductive reactance.\n\nWrite the expression for the voltage across the resistor.\n\n\\\\({V_R} = {I_{in}}R\\\\)\n\nHere,\\\\(R\\\\)is the resistance.\n\nWrite the expression for the capacitive reactance.\n\n\\\\({X_C} = \\frac{1}{{\\omega C}}\\\\)\n\nHere,\\\\(\\omega \\\\)is the angular frequency and\\\\(C\\\\)is the capacitance.\n\nWrite the expression for the inductive reactance.\n\n\\\\({X_L} = \\omega L\\\\)\n\nHere,\\\\(L\\\\)is the inductance.\n\nWrite the expression for the angular frequency.\n\n\\\\(\\omega = 2\\pi f\\\\)\n\nHere,\\\\(f\\\\)is the frequency.\n\nWrite the expression for the voltage across the diode.\n\n\\\\({V_{DD}} = {V_L} + {V_R} + {V_C}\\\\)\n\nHere,\\\\({V_{DD}}\\\\)is the voltage across the diode.\n\nWrite the expression for the output voltage.\n\n\\\\({V_{out}} = {V_R} + {V_C}\\\\)\n\nHere,\\\\({V_{out}}\\\\)is the output voltage.\n\n## Step 3: Determine the current in the circuit\n\nThe input impedance of the circuit is,\n\n\\\\(\\begin{array}{c}{Z_{in}} = {Z_1} + {Z_2}\\\\\\ = {R_1} + {X_C} + {R_2} + {X_L}\\\\\\ = {R_1} + {R_2} + {X_C} + {X_L}\\end{array}\\\\)\n\nThe current in the circuit is,\n\n\\\\(\\begin{array}{c}{I_{in}} = \\frac{{{V_{in}}}}{{{Z_{in}}}}\\\\\\ = \\frac{{{V_{in}}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\end{array}\\\\)\n\nTherefore, the current in the circuit is \\\\(\\frac{{{V_{in}}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\n\n## Step 4: Determine the output voltage\n\nThe output voltage of the circuit is,\n\n\\\\(\\begin{array}{c}{V_{out}} = {I_{in}}{Z_2}\\\\\\ = \\frac{{{V_{in}}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\left( {{R_2} + {X_L}} \\right)\\\\\\ = \\frac{{{V_{in}}\\left( {{R_2} + {X_L}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\end{array}\\\\)\n\nTherefore, the output voltage of the circuit is \\\\(\\frac{{{V_{in}}\\left( {{R_2} + {X_L}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\n\n## Step 5: Determine the voltage across the capacitor\n\nThe voltage across the capacitor is,\n\n\\\\(\\begin{array}{c}{V_C} = {I_{in}}{X_C}\\\\\\ = \\frac{{{V_{in}}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}{X_C}\\\\\\ = \\frac{{{V_{in}}{X_C}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\end{array}\\\\)\n\nTherefore, the voltage across the capacitor is \\\\(\\frac{{{V_{in}}{X_C}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\n\n## Step 6: Determine the voltage across the inductor\n\nThe voltage across the inductor is,\n\n\\\\(\\begin{array}{c}{V_L} = {I_{in}}{X_L}\\\\\\ = \\frac{{{V_{in}}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}{X_L}\\\\\\ = \\frac{{{V_{in}}{X_L}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\end{array}\\\\)\n\nTherefore, the voltage across the inductor is \\\\(\\frac{{{V_{in}}{X_L}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\n\n## Step 7: Determine the voltage across the resistor\n\nThe voltage across the resistor is,\n\n\\\\(\\begin{array}{c}{V_R} = {I_{in}}R\\\\\\ = \\frac{{{V_{in}}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}{R_2}\\\\\\ = \\frac{{{V_{in}}{R_2}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\end{array}\\\\)\n\nTherefore, the voltage across the resistor is \\\\(\\frac{{{V_{in}}{R_2}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\n\n## Step 8: Determine the voltage across the diode\n\nThe voltage across the diode is,\n\n\\\\(\\begin{array}{c}{V_{DD}} = {V_L} + {V_R} + {V_C}\\\\\\ = \\frac{{{V_{in}}{X_L}}}{{{R_1} + {R_2} + {X_C} + {X_L}}} + \\frac{{{V_{in}}{R_2}}}{{{R_1} + {R_2} + {X_C} + {X_L}}} + \\frac{{{V_{in}}{X_C}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\\\ = \\frac{{{V_{in}}\\left( {{X_L} + {R_2} + {X_C}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\end{array}\\\\)\n\nTherefore, the voltage across the diode is \\\\(\\frac{{{V_{in}}\\left( {{X_L} + {R_2} + {X_C}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\n\n## Step 9: Determine the output voltage\n\nThe output voltage of the circuit is,\n\n\\\\(\\begin{array}{c}{V_{out}} = {V_R} + {V_C}\\\\\\ = \\frac{{{V_{in}}{R_2}}}{{{R_1} + {R_2} + {X_C} + {X_L}}} + \\frac{{{V_{in}}{X_C}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\\\ = \\frac{{{V_{in}}\\left( {{R_2} + {X_C}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\end{array}\\\\)\n\nTherefore, the output voltage of the circuit is \\\\(\\frac{{{V_{in}}\\left( {{R_2} + {X_C}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\n\nThe current in the circuit is \\\\(\\frac{{{V_{in}}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\nThe output voltage of the circuit is \\\\(\\frac{{{V_{in}}\\left( {{R_2} + {X_L}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\nThe voltage across the capacitor is \\\\(\\frac{{{V_{in}}{X_C}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\nThe voltage across the inductor is \\\\(\\frac{{{V_{in}}{X_L}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\nThe voltage across the resistor is \\\\(\\frac{{{V_{in}}{R_2}}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\nThe voltage across the diode is \\\\(\\frac{{{V_{in}}\\left( {{X_L} + {R_2} + {X_C}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).\nThe output voltage of the circuit is \\\\(\\frac{{{V_{in}}\\left( {{R_2} + {X_C}} \\right)}}{{{R_1} + {R_2} + {X_C} + {X_L}}}\\\\).",
        "format": "markdown",
        "sha256": "81e6f1ec220e47b0c561b17d43a49b4c202522bc61e4304b1714ec092ae12fd9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer analyzes an unrelated RLC/diode circuit and does not identify either transistor, the feedback path, or the circuit’s low input resistance and transimpedance behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 2247,
        "total_tokens": 4522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 2247,
        "total_tokens": 4522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1. Given Information  We have to analyze the circuit.  The given circuit is  [Capture_1.JPG]  ## Step 2. Analyzing the circuit  The given circuit is a summing amplifier circuit.  The output voltage of the summing amplifier is given by  -$ {V}_{out}=-\\left(\\frac{{R}_{f}}{{R}_{1}}{V}_{1}+\\frac{{R}_{f}}{{R}_{2}}{V}_{2}\\right)$  Here, $ {R}_{f}=100k\\Omega,{R}_{1}=100k\\Omega,{R}_{2}=100k\\Omega,{V}_{1}=-1V,{V}_{2}=+1V$  Now, we have to put the values in the formula.  $ {V}_{out}=-\\left(\\frac{100k\\Omega }{100k\\Omega }\\times \\left(-1V\\right)+\\frac{100k\\Omega }{100k\\Omega }\\times \\left(+1V\\right)\\right)\\phantom{\\rule{0ex}{0ex}}{V}_{out}=-\\left(-1+1\\right)\\phantom{\\rule{0ex}{0ex}}{V}_{out}=0V$  \n\nThe output voltage of the circuit is$ 0V$.",
        "format": "markdown",
        "sha256": "d0100da28276ec8e3c03b82d3005939f59f21a57aa0f7c388d2678923421163d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the transistor feedback circuit as a resistive summing amplifier and invents component values and inputs. It does not analyze the actual topology or its feedback behavior.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 290,
        "total_tokens": 2565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 290,
        "total_tokens": 2565,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Step 1: Given data\n\nThe given circuit is shown below.\n\n  \n\nThe current source is $ {I}_{in}=10\\text{mA}$.\n\nThe resistors are $ {R}_{1}=10\\text{k}\\Omega $and $ {R}_{2}=20\\text{k}\\Omega $.\n\nThe capacitor is $ {C}_{1}=10\\mu \\text{F}$.\n\nThe diode is $ {D}_{1}$is forward biased, and $ {D}_{2}$is reverse biased.\n\n## Determining the concept\n\nUse the concept of equivalent resistance and voltage division rule to find the\noutput voltage.\n\nFormulae are as follows:\n\n$ {R}_{eq}=\\frac{{R}_{1}{R}_{2}}{{R}_{1}+{R}_{2}}$\n\n$ {V}_{out}=\\frac{{R}_{2}}{{R}_{1}+{R}_{2}}{V}_{in}$\n\nWhere, $ {V}_{out}$is output voltage, $ {V}_{in}$is input voltage, and $\n{R}_{1},{R}_{2}$are resistors.\n\n## Determining the output voltage\n\nThe diode $ {D}_{1}$is forward biased, and $ {D}_{2}$is reverse biased. So,\nthe diode $ {D}_{1}$acts as a short circuit, and $ {D}_{2}$acts as an open\ncircuit.\n\nThe equivalent resistance of $ {R}_{1}$and $ {R}_{2}$is,\n\n$ {R}_{eq}=\\frac{{R}_{1}{R}_{2}}{{R}_{1}+{R}_{2}}$\n\n$ {R}_{eq}=\\frac{10\\text{k}\\Omega \\times 20\\text{k}\\Omega }{10\\text{k}\\Omega\n+20\\text{k}\\Omega }$\n\n$ {R}_{eq}=6.67\\text{k}\\Omega $\n\nThe output voltage is,\n\n$ {V}_{out}=\\frac{{R}_{2}}{{R}_{1}+{R}_{2}}{V}_{in}$\n\n$ {V}_{out}=\\frac{20\\text{k}\\Omega }{10\\text{k}\\Omega +20\\text{k}\\Omega\n}\\left(10\\text{mA}\\times 10\\text{k}\\Omega \\right)$\n\n$ {V}_{out}=66.67\\text{V}$\n\nHence, the output voltage is $ 66.67\\text{V}$.\n\nThe output voltage is $ 66.67\\text{V}$.",
        "format": "markdown",
        "sha256": "655fc85fb299176aac165e8f60421fd213492019a56c7d71c7fcdb1f09fdf22e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer analyzes an unrelated resistor-diode circuit, invents component values absent from the question, and does not identify or analyze the NMOS-PMOS feedback circuit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 548,
        "total_tokens": 2823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2275,
        "output_tokens": 548,
        "total_tokens": 2823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit will fail to oscillate if the three capacitors become arbitrarily large. This is because the capacitors act as energy storage elements in the circuit, and their size determines the amount of energy that can be stored and released during each oscillation cycle. As the capacitors become larger, the energy stored in them increases, which can lead to instability and failure of the circuit to oscillate. Additionally, the increased capacitance can also affect the frequency of oscillation, making it difficult to maintain a stable oscillation.",
        "format": "markdown",
        "sha256": "08e028487bc81d1b12620ae28a6b04adb793eb25f11a37b3e151cc6cee3cad64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: the ring continues oscillating at a lower frequency as all three capacitances increase. The answer only recognizes that capacitance affects frequency; its energy-storage and instability explanation does not support the correct behavior.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1966,
        "output_tokens": 101,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1966,
        "output_tokens": 101,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit will fail to oscillate if the three capacitors become arbitrarily large. This is because the capacitors act as energy storage elements in the circuit, and their size determines the amount of energy that can be stored and released during each oscillation cycle. As the capacitors become larger, the energy stored in them increases, which can lead to instability and failure of the circuit to oscillate. Additionally, the increased capacitance can also affect the frequency of oscillation, making it difficult to maintain a stable oscillation.",
        "format": "markdown",
        "sha256": "08e028487bc81d1b12620ae28a6b04adb793eb25f11a37b3e151cc6cee3cad64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: the ring continues oscillating at a lower frequency as all three capacitances increase. The answer only recognizes that capacitance affects frequency; its energy-storage and instability explanation does not support the correct behavior.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1966,
        "output_tokens": 101,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1966,
        "output_tokens": 101,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit will fail to oscillate if the three capacitors become arbitrarily large. This is because the capacitors act as energy storage elements in the circuit, and their size determines the amount of energy that can be stored and released during each oscillation cycle. As the capacitors become larger, the energy stored in them increases, which can lead to instability and failure of the oscillator circuit. Additionally, larger capacitors can also introduce unwanted parasitic effects, such as increased capacitance and inductance, which can further degrade the performance of the oscillator. Therefore, it is important to carefully select the size and type of capacitors used in an oscillator circuit to ensure stable and reliable operation.",
        "format": "markdown",
        "sha256": "fb8546acf3723fdbd071745f6b3977cb9aacaf0c907ea89e4323448f8a9d77b8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the central result: adding equal capacitance at all three nodes slows the oscillation but does not stop it. The energy-storage and parasitic-effects claims do not justify oscillator failure.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1966,
        "output_tokens": 134,
        "total_tokens": 2100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1966,
        "output_tokens": 134,
        "total_tokens": 2100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise will be reduced by 6 dB. This is because doubling the capacitance values will increase the time constant of the circuit, which in turn will reduce the phase noise. The relationship between capacitance and phase noise is logarithmic, so doubling the capacitance will result in a 6 dB reduction in phase noise.",
        "format": "markdown",
        "sha256": "812b5334d4979c74e63d37e5a5894ff38d715b11e3535a8c98f881d7b0b8ac50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the correct 6 dB reduction and supports it with the increased load time constant, an equivalent delay argument for the lower phase noise.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1965,
        "output_tokens": 63,
        "total_tokens": 2028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1965,
        "output_tokens": 63,
        "total_tokens": 2028,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise is inversely proportional to the capacitance value. Therefore, if the capacitance is doubled, the phase noise will be halved. This is because the larger capacitance value results in a lower impedance, which reduces the impact of noise on the signal.",
        "format": "markdown",
        "sha256": "d0b2db4edbb8677dbc3ecc47a70cc41e8eed0f7adea000bbab75dcf653557c29"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly predicts that phase noise decreases, but gives a factor of two rather than the expected factor of four (about 6 dB) at a fixed offset frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1965,
        "output_tokens": 50,
        "total_tokens": 2015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1965,
        "output_tokens": 50,
        "total_tokens": 2015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise will be reduced by 6 dB. This is because the phase noise is inversely proportional to the capacitance value. Doubling the capacitance will result in a fourfold increase in the capacitance value, which in turn will reduce the phase noise by 6 dB.",
        "format": "markdown",
        "sha256": "b04678eb4bfa7281fe38c8ba12d0c2b4bce55dc8bdabfff92572501b83da6eb2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The 6 dB decrease is correct, but the explanation incorrectly says doubling capacitance creates a fourfold capacitance increase and does not give the valid frequency or edge-rate reasoning.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1965,
        "output_tokens": 55,
        "total_tokens": 2020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1965,
        "output_tokens": 55,
        "total_tokens": 2020,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit will fail to oscillate if CL becomes arbitrarily large. This is because the loop gain will drop below the necessary value of -1, which is required for sustained oscillations.",
        "format": "markdown",
        "sha256": "a22c56d3d1a766a92997aead006c56757d408b679c0449f18adfc6f5f346b733"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large CL can stop oscillation and identifies failure to meet the Barkhausen loop-gain condition. The phrasing “below -1” is imprecise, but the intended gain-roll-off explanation is consistent with the golden solution.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 929,
        "output_tokens": 38,
        "total_tokens": 967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 929,
        "output_tokens": 38,
        "total_tokens": 967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit will fail to oscillate if CL becomes arbitrarily large. This is because the loop gain will drop below unity, preventing sustained oscillations.",
        "format": "markdown",
        "sha256": "25668ad7b958348e70b772d3e1daa3ddc5ba457f7fc50e68c819f53099c336bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says arbitrarily large CL can stop oscillation because the loop gain falls below unity, violating the Barkhausen condition.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 929,
        "output_tokens": 30,
        "total_tokens": 959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 929,
        "output_tokens": 30,
        "total_tokens": 959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit will fail to oscillate if CL becomes arbitrarily large. This is because the loop gain will drop below unity, preventing sustained oscillations.",
        "format": "markdown",
        "sha256": "25668ad7b958348e70b772d3e1daa3ddc5ba457f7fc50e68c819f53099c336bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says arbitrarily large CL can stop oscillation because the loop gain falls below unity, violating the Barkhausen condition.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 929,
        "output_tokens": 30,
        "total_tokens": 959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 929,
        "output_tokens": 30,
        "total_tokens": 959,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices increases the transconductance (gm) of the transistors. This, in turn, increases the current through the transistors, which reduces the noise contribution from the transistors. As a result, the phase noise of the circuit decreases.",
        "format": "markdown",
        "sha256": "63eae91e80d0ec12eaa944c7673b68567a622f172bcaf6c4eb028cbbb8897e50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly says the phase noise decreases, but omits the expected roughly 3 dB reduction. The explanation is also physically wrong: device noise current increases with width rather than decreasing.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1753,
        "output_tokens": 59,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1753,
        "output_tokens": 59,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices increases the transconductance (gm) of the transistors. This, in turn, increases the current through the transistors, which reduces the noise contribution from the transistors. As a result, the phase noise of the circuit decreases.",
        "format": "markdown",
        "sha256": "63eae91e80d0ec12eaa944c7673b68567a622f172bcaf6c4eb028cbbb8897e50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly says the phase noise decreases, but omits the expected roughly 3 dB reduction. The explanation is also physically wrong: device noise current increases with width rather than decreasing.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1753,
        "output_tokens": 59,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1753,
        "output_tokens": 59,
        "total_tokens": 1812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Doubling the widths of the NMOS and PMOS devices increases the transconductance, which in turn increases the current and reduces the resistance. This results in a decrease in the thermal noise, which is a major contributor to phase noise. Therefore, the phase noise will decrease.",
        "format": "markdown",
        "sha256": "36759077537fa4859a9ae5c272738336c4ba140c6f5300df3eaa17afd52b1f50"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly predicts that phase noise decreases, but gives no 3 dB magnitude and incorrectly claims device thermal noise decreases; its noise current power actually increases with width.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1753,
        "output_tokens": 58,
        "total_tokens": 1811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1753,
        "output_tokens": 58,
        "total_tokens": 1811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we need to analyze the circuit in the small-signal regime. The ring oscillator consists of three inverters connected in a loop, and each inverter can be modeled as a small-signal amplifier with a gain and an output resistance.\n\n1. **Model Each Inverter:**\n   Each inverter can be modeled as a small-signal amplifier with a gain \\( A \\) and an output resistance \\( r_o \\). The gain \\( A \\) is typically large, and the output resistance \\( r_o \\) is the resistance seen at the output of the inverter.\n\n2. **Determine the Loop Gain:**\n   The loop gain of the ring oscillator is the product of the gains of the three inverters. Since the inverters are identical, the loop gain is \\( A^3 \\).\n\n3. **Stability Condition:**\n   For the ring oscillator to oscillate, the loop gain must be greater than 1 at the oscillation frequency. This means \\( A^3 > 1 \\).\n\n4. **Output Resistance of the Ring Oscillator:**\n   The output resistance of the ring oscillator is the parallel combination of the output resistances of the three inverters. Since the inverters are identical, the output resistance of the ring oscillator is \\( \\frac{r_o}{3} \\).\n\n5. **Small-Signal Resistance at the Supply Node:**\n   The small-signal resistance seen looking into the supply node is the same as the output resistance of the ring oscillator because the supply node is effectively the output node of the ring oscillator in the small-signal analysis.\n\nTherefore, the small-signal resistance seen looking into the supply node of the ring oscillator is \\( \\frac{r_o}{3} \\).\n\nThe final answer is \\(\\boxed{r_o}\\).",
        "format": "markdown",
        "sha256": "6eab00903c8c0fa3901d5310da7a3c9a3b5293b641343d63a1cbbe437251d270"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the oscillation-driven charging and discharging of the load capacitances and instead equates the supply-node resistance to inverter output resistance. That analysis is unsupported and internally inconsistent: it derives r_o/3 but gives r_o as the final answer.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 382,
        "total_tokens": 2130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 382,
        "total_tokens": 2130,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we need to analyze the circuit in the small-signal regime. The ring oscillator consists of three inverters connected in a loop, and we are interested in the resistance seen at the supply node.\n\n1. **Identify the small-signal model for each inverter:**\n   Each inverter can be modeled as a small-signal resistance \\( r_x \\) in parallel with a current source. The small-signal resistance \\( r_x \\) is given by the transconductance \\( g_m \\) of the inverter and the output resistance \\( r_o \\) of the inverter. For simplicity, we can assume that the output resistance \\( r_o \\) is much larger than the transconductance \\( g_m \\), so the small-signal resistance \\( r_x \\) is approximately \\( \\frac{1}{g_m} \\).\n\n2. **Determine the equivalent small-signal resistance for the entire ring oscillator:**\n   Since the ring oscillator consists of three inverters connected in a loop, the small-signal resistance seen at the supply node is the parallel combination of the small-signal resistances of the three inverters. If each inverter has a small-signal resistance \\( r_x \\), then the equivalent small-signal resistance \\( R_{\\text{eq}} \\) is given by:\n   \\[\n   R_{\\text{eq}} = \\frac{r_x}{3}\n   \\]\n\n3. **Substitute the given value of \\( r_x \\):**\n   Given that \\( r_x = 100 \\, \\Omega \\), the equivalent small-signal resistance \\( R_{\\text{eq}} \\) is:\n   \\[\n   R_{\\text{eq}} = \\frac{100 \\, \\Omega}{3} = \\frac{100}{3} \\, \\Omega \\approx 33.33 \\, \\Omega\n   \\]\n\nTherefore, the small-signal resistance seen looking into the supply node of the ring oscillator is \\(\\boxed{33.33 \\, \\Omega}\\).",
        "format": "markdown",
        "sha256": "eced4661508ce9089075aac86ac50fb5cb24d912238338c72905761b1e5cbf4f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer uses a static gm-based resistance model and misses the dominant oscillation-driven charging and discharging of the load capacitances. It also assumes an unsupported 100 Ω value for each inverter, so its numerical result is not justified.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 451,
        "total_tokens": 2199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 451,
        "total_tokens": 2199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance seen looking into the supply node of the ring oscillator, we need to analyze the circuit in the small-signal domain. The ring oscillator consists of three inverters connected in a loop, and we are interested in the resistance seen at the supply node.\n\n1. **Identify the small-signal model for each inverter:**\n   Each inverter can be modeled as a small-signal voltage-controlled current source with a transconductance \\( g_m \\) and an output resistance \\( r_o \\). The transconductance \\( g_m \\) is given by the slope of the transfer characteristic of the inverter at the operating point, and the output resistance \\( r_o \\) is the resistance seen looking into the output of the inverter.\n\n2. **Determine the small-signal resistance of the ring oscillator:**\n   The small-signal resistance seen looking into the supply node of the ring oscillator is the parallel combination of the output resistances of the three inverters. Since the inverters are identical, each has the same output resistance \\( r_o \\).\n\n   The total small-signal resistance \\( R_x \\) is given by:\n   \\[\n   R_x = \\frac{r_o}{3}\n   \\]\n\n3. **Conclusion:**\n   The small-signal resistance seen looking into the supply node of the ring oscillator is:\n   \\[\n   \\boxed{\\frac{r_o}{3}}\n   \\]",
        "format": "markdown",
        "sha256": "c53e2b786046e721f2fcbf67442d5df47b86489d03e9331a267f5f6c00b708d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The resistance is set by the oscillation-driven charging and discharging of the node capacitances, not by three inverter output resistances in parallel. The claimed connection to the supply node is incorrect and misses the dominant mechanism.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 303,
        "total_tokens": 2051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1748,
        "output_tokens": 303,
        "total_tokens": 2051,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "1. **Identify the behavior of the circuit when oscillating**:  When the ring oscillator is oscillating, the transistors in each inverter are not in a static state but are switching between different operating regions. This dynamic behavior affects the small-signal parameters.\n\n2. **Evaluate the impact on small-signal resistance**:  The small-signal resistance `RX` is derived under the assumption that each inverter behaves as two diode-connected devices in series. However, during oscillation, the transistors are not simply diode-connected but are actively switching, which changes their effective transconductance and resistance.\n\n3. **Conclude whether the formula remains valid**:  Since the transistors' behavior changes significantly during oscillation, the formula `RX ~= (1/3) (1/gmn + 1/gmp)`, which is based on static conditions, does not accurately represent the small-signal resistance during oscillation.\n\nThe answer is Yes, the answer changes when the circuit oscillates.",
        "format": "markdown",
        "sha256": "369145d07a1891a7978cbdb27281a0ecc128d7ec8cf347346c3741ba530b0e9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that oscillation invalidates the static diode-connected model, but gives no capacitive-current analysis or comparison showing that RX remains on the order of the MOS on-resistance.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1833,
        "output_tokens": 196,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1833,
        "output_tokens": 196,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "1. **Identify the behavior of the circuit when oscillating**:  When the ring oscillator is oscillating, the transistors in each inverter are not in a static state but are switching between different operating regions. This dynamic behavior affects the small-signal resistance seen at the supply node.\n\n2. **Analyze the impact of oscillation on small-signal resistance**:  During oscillation, the transistors are not simply behaving as diode-connected devices. Instead, they are actively switching, which means the small-signal model needs to account for the dynamic behavior rather than just the static transconductance values.\n\n3. **Determine if the formula remains valid during oscillation**:  The formula provided assumes a static condition where each inverter behaves like two diode-connected devices. This assumption does not hold during oscillation because the transistors are in a non-linear, time-varying state.\n\nThe answer is Yes, the answer changes because the circuit's dynamic behavior during oscillation invalidates the static assumption.",
        "format": "markdown",
        "sha256": "f4e958a6dec516bcc3942e491af237b1ae008c1416ac4731d17f093768b1e302"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that oscillation invalidates the static diode-connected-device assumption, but gives no capacitive charging mechanism or conclusion about the resistance magnitude; the golden solution assigns this limited response 1.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1833,
        "output_tokens": 196,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1833,
        "output_tokens": 196,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "1. **Identify the behavior of the circuit when oscillating**:  When the ring oscillator is oscillating, the transistors in each inverter are not in a static state but are switching between different operating regions. This dynamic behavior affects the small-signal resistance seen at the supply node.\n\n2. **Analyze the impact of oscillation on small-signal resistance**:  During oscillation, the transistors are not simply behaving as diode-connected devices. Instead, they are actively switching, which means the small-signal model needs to account for the dynamic behavior rather than just the static transconductance values.\n\n3. **Determine if the formula remains valid during oscillation**:  The formula provided assumes a static condition where each inverter behaves like two diode-connected devices. This assumption does not hold during oscillation because the transistors are in a non-linear, time-varying state.\n\nThe answer is Yes, the answer changes because the circuit's dynamic behavior during oscillation invalidates the static assumption.",
        "format": "markdown",
        "sha256": "f4e958a6dec516bcc3942e491af237b1ae008c1416ac4731d17f093768b1e302"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It notes that oscillation invalidates the static diode-connected-device assumption, but gives no capacitive charging mechanism or conclusion about the resistance magnitude; the golden solution assigns this limited response 1.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1833,
        "output_tokens": 196,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1833,
        "output_tokens": 196,
        "total_tokens": 2029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of M7 increases, the current through M7 increases, which in turn increases the current through M1 and M2. This results in a decrease in the voltage drop across M1 and M2, leading to a decrease in the initial voltage gain.",
        "format": "markdown",
        "sha256": "6ad0037554304aadcb308068d543dab69e964234ee969053c490b9ade064e9bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion and increased tail current are correct, but the claimed decrease in voltage drop across M1/M2 is not the governing gain mechanism. It misses that the gain falls because the integration gain (roughly gm/ICM) decreases as M7 current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 55,
        "total_tokens": 1855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 55,
        "total_tokens": 1855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "As the width of M7 increases, the current through M7 increases, which in turn increases the current through M1 and M2. This results in a decrease in the voltage drop across M1 and M2, leading to a decrease in the initial voltage gain.",
        "format": "markdown",
        "sha256": "6ad0037554304aadcb308068d543dab69e964234ee969053c490b9ade064e9bb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion and increased tail current are correct, but the claimed decrease in voltage drop across M1/M2 is not the governing gain mechanism. It misses that the gain falls because the integration gain (roughly gm/ICM) decreases as M7 current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 55,
        "total_tokens": 1855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 55,
        "total_tokens": 1855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "1. **Identify the role of M7 in the circuit**:  M7 is a MOSFET connected between the output node and ground. It acts as a load for the differential pair M1 and M2.\n\n2. **Understand the effect of increasing the width of M7**:  Increasing the width of M7 increases its conductance (1/Rds), which effectively reduces the output resistance of the circuit.\n\n3. **Determine the impact on voltage gain**:  The voltage gain of a differential amplifier is inversely proportional to the output resistance. As the output resistance decreases due to the increased width of M7, the voltage gain also decreases.\n\nThe answer is The initial voltage gain decreases.",
        "format": "markdown",
        "sha256": "32de6e795dea5c1b09546daaeddf2d3652a20c6cf4d5cc7a1a20cbe087414f1d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The trend is correct, but the explanation misidentifies M7 as an output load rather than the tail transistor. The decrease is due to increased tail current reducing the initial integration gain, not reduced output resistance.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 141,
        "total_tokens": 1941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 141,
        "total_tokens": 1941,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes P and Q will increase the initial voltage gain of the circuit. This is because the capacitance at these nodes forms part of the feedback network, which affects the gain of the operational amplifier. A larger capacitance will result in a larger feedback signal, which in turn will increase the gain of the amplifier.",
        "format": "markdown",
        "sha256": "1aaefc0c6fbab303378951f49f46521d2cfdbe9a1dd8f2d348999b6d0013efc6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the correct result: increasing the capacitance leaves the initial gain approximately unchanged and mainly slows the transient. The answer also incorrectly treats P and Q as an operational-amplifier feedback network.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1799,
        "output_tokens": 65,
        "total_tokens": 1864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1799,
        "output_tokens": 65,
        "total_tokens": 1864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes P and Q will increase the initial voltage gain of the circuit. This is because the capacitance at these nodes forms part of the feedback network, which affects the gain of the operational amplifier. A larger capacitance will result in a larger feedback signal, which in turn will increase the gain of the amplifier.",
        "format": "markdown",
        "sha256": "1aaefc0c6fbab303378951f49f46521d2cfdbe9a1dd8f2d348999b6d0013efc6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the correct result: increasing the capacitance leaves the initial gain approximately unchanged and mainly slows the transient. The answer also incorrectly treats P and Q as an operational-amplifier feedback network.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1799,
        "output_tokens": 65,
        "total_tokens": 1864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1799,
        "output_tokens": 65,
        "total_tokens": 1864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the capacitance at nodes P and Q will increase the initial voltage gain of the circuit. This is because the capacitance at these nodes forms part of the feedback network, which determines the gain of the circuit. A larger capacitance will result in a larger feedback signal, which in turn will increase the gain of the circuit. However, it is important to note that increasing the capacitance will also increase the time constant of the circuit, which may affect the stability and frequency response of the circuit. Therefore, the capacitance at nodes P and Q should be chosen carefully to achieve the desired gain and stability characteristics.",
        "format": "markdown",
        "sha256": "27910b209290b7da0e9ea4a1e52873dbbcc289727fb828f08207fdb4c63da3d3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The main conclusion is wrong: increasing the capacitance does not increase the initial gain. It also misidentifies the node capacitances as a feedback network. The observation that capacitance affects the time constant is relevant, but it does not support the claimed gain increase.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1799,
        "output_tokens": 119,
        "total_tokens": 1918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1799,
        "output_tokens": 119,
        "total_tokens": 1918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of M5 and M6 will increase the current drive capability of the output stage, which can improve the speed of the circuit. This is because a larger current can charge and discharge the load capacitance more quickly, resulting in faster switching times. However, it's important to note that increasing the widths of M5 and M6 may also increase the power consumption of the circuit, so there is a trade-off between speed and power efficiency.\n    Therefore, the answer is improve.",
        "format": "markdown",
        "sha256": "2fd82d46ad2d00fa85bde5dcd5b9c35610a5be0ded3f546fb4ec0662941e53b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct initial trend, but mischaracterizes M5/M6 as output-stage drivers rather than cross-coupled regenerative devices. It misses both the regeneration mechanism and the added-capacitance limit that leads to an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 103,
        "total_tokens": 1903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 103,
        "total_tokens": 1903,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of M5 and M6 will increase the current drive capability of the output stage, which can improve the speed of the circuit. This is because a larger current can charge and discharge the load capacitance more quickly, resulting in faster switching times. However, it's important to note that increasing the widths of M5 and M6 will also increase the power consumption of the circuit, which may not be desirable in all applications.\n    Therefore, the answer is: The speed improves.",
        "format": "markdown",
        "sha256": "7b88e0b26e8cfdb2530bce74dc6cb5868bbda30c70d35c2e74e6f65ee0fea601"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The initial speed trend is correct, but the explanation misidentifies M5/M6 as output-stage devices rather than cross-coupled regenerative devices and omits the added-capacitance limit and optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 102,
        "total_tokens": 1902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 102,
        "total_tokens": 1902,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of M5 and M6 will increase the current drive capability of the output stage, which can improve the speed of the circuit by allowing it to charge and discharge the load capacitance more quickly. However, it may also increase the power consumption and the input capacitance seen by the previous stage, which could potentially degrade the speed if the previous stage is not designed to handle the increased load. Therefore, the overall effect on speed depends on the specific design and operating conditions of the circuit.",
        "format": "markdown",
        "sha256": "e36e2bc633c1d47c006ec69d4ac51ddef07da419894045b5a4523b3da13e221d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that stronger drive can improve speed and that added capacitance can hurt it, but misframes M5/M6 as an output stage and does not identify the key regenerative-strength mechanism or the initial-improvement-then-optimum trend.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 100,
        "total_tokens": 1900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1800,
        "output_tokens": 100,
        "total_tokens": 1900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit will generally improve the speed of the circuit. This is because wider transistors have lower resistance, which allows for faster switching and higher current flow. As a result, the circuit can operate at higher frequencies and with reduced delay. However, it's important to note that increasing the widths of the transistors may also increase the power consumption and area of the circuit, which could be a concern in certain applications. Additionally, the improvement in speed may be limited by other factors in the circuit, such as the capacitance of the load or the resistance of the interconnects. Therefore, it's important to consider the trade-offs between speed, power, and area when designing a circuit.",
        "format": "markdown",
        "sha256": "55bc8485b8b10d649685a4accba2bd7681d630422b7d2bd7225a0794bcaa3ea8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed initially because their resistance falls. It does not identify the added latch-node capacitance that can limit or reverse the benefit at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1627,
        "output_tokens": 148,
        "total_tokens": 1775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1627,
        "output_tokens": 148,
        "total_tokens": 1775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors will improve the speed of the circuit. This is because wider transistors have lower resistance, which allows for faster switching and higher current flow. As a result, the circuit can operate at higher frequencies and with reduced delay. Additionally, wider transistors can handle larger currents, which can be beneficial in high-speed applications where large currents are required. However, it's important to note that increasing the widths of the transistors may also increase the power consumption and area of the circuit, which could be a concern in certain applications.",
        "format": "markdown",
        "sha256": "4e076cfdd7cb7eb747669da93fe1ea7a6cc06efee98e1ceb0b2f90486fc274db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening lowers on-resistance and improves speed, but does not mention the added node capacitance that eventually limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1627,
        "output_tokens": 113,
        "total_tokens": 1740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1627,
        "output_tokens": 113,
        "total_tokens": 1740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit will generally improve the speed of the circuit. This is because wider transistors have lower resistance, which allows for faster switching and higher current flow. As a result, the circuit can operate at higher frequencies and with reduced delay. However, it's important to note that increasing the widths of the transistors may also increase the power consumption and area of the circuit, which could be a concern in certain applications. Additionally, the improvement in speed may be limited by other factors in the circuit, such as the capacitance of the load or the resistance of the interconnects. Therefore, it's important to consider the trade-offs between speed, power, and area when designing a circuit.",
        "format": "markdown",
        "sha256": "55bc8485b8b10d649685a4accba2bd7681d630422b7d2bd7225a0794bcaa3ea8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed initially because their resistance falls. It does not identify the added latch-node capacitance that can limit or reverse the benefit at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1627,
        "output_tokens": 148,
        "total_tokens": 1775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1627,
        "output_tokens": 148,
        "total_tokens": 1775,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the structure in the figure provides quadrature outputs. The outputs X and Y are 90 degrees out of phase with each other, which is a characteristic of quadrature signals.",
        "format": "markdown",
        "sha256": "7cf731d655c4628c4dd5800941ebc632f7cc5b3673ae8a3e5cd7e4d62fc92011"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal quadrature between X and Y, but omits why the phase relationship is not exact: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1612,
        "output_tokens": 37,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1612,
        "output_tokens": 37,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the structure in the figure provides quadrature outputs. The outputs X and Y are 90 degrees out of phase with each other, which is a characteristic of quadrature signals.",
        "format": "markdown",
        "sha256": "7cf731d655c4628c4dd5800941ebc632f7cc5b3673ae8a3e5cd7e4d62fc92011"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal quadrature between X and Y, but omits why the phase relationship is not exact: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1612,
        "output_tokens": 37,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1612,
        "output_tokens": 37,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the structure in the figure provides quadrature outputs. The outputs X and Y are 90 degrees out of phase with each other, which is a characteristic of quadrature signals.",
        "format": "markdown",
        "sha256": "7cf731d655c4628c4dd5800941ebc632f7cc5b3673ae8a3e5cd7e4d62fc92011"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal quadrature between X and Y, but omits why the phase relationship is not exact: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1612,
        "output_tokens": 37,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1612,
        "output_tokens": 37,
        "total_tokens": 1649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit will generally improve the speed of the circuit. This is because wider transistors have lower resistance, which allows for faster switching and higher current flow. As a result, the circuit can operate at higher frequencies and with reduced propagation delays. However, it's important to note that increasing the width of transistors also increases their capacitance, which can have a negative impact on speed if not properly managed. Therefore, while increasing the widths of clocked transistors can improve speed, it's crucial to consider the trade-offs and ensure that the overall circuit design is optimized for the desired performance.",
        "format": "markdown",
        "sha256": "bf58922ef6b21a3b12f27d0f2dc3f5a673648f8eb0b3082284cdd3b5b772d8a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers their resistance, but omits the topology-specific charge-sharing effect and its acceptable limit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2243,
        "output_tokens": 127,
        "total_tokens": 2370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2243,
        "output_tokens": 127,
        "total_tokens": 2370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit will generally improve the speed of the circuit. This is because wider transistors have lower resistance, which allows for faster switching and higher current flow. As a result, the transistors can charge and discharge the load capacitance more quickly, leading to faster operation of the circuit. However, it's important to note that increasing the width of the transistors also increases their capacitance, which can have a negative impact on speed if not properly managed. Therefore, the overall effect on speed will depend on the specific design and operating conditions of the circuit.\nThe answer is improve",
        "format": "markdown",
        "sha256": "58491f446c71a89dc922bdc65bf9b9ec7841419fea78ccfff92bd19924a89eea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers their resistance. It does not explain that their added capacitance is largely off the data path or mention charge sharing as the limit, so it misses the topology-specific qualification.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2243,
        "output_tokens": 121,
        "total_tokens": 2364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2243,
        "output_tokens": 121,
        "total_tokens": 2364,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Increasing the widths of the clocked transistors in the circuit will generally improve the speed of the circuit. This is because wider transistors have lower resistance, which allows for faster switching and higher current flow. As a result, the circuit can operate at higher frequencies and with reduced propagation delays. However, it's important to note that increasing the width of transistors also increases their capacitance, which can have a negative impact on speed if not properly managed. Therefore, while increasing the widths of clocked transistors can improve speed, it's crucial to consider the trade-offs and ensure that the overall circuit design is optimized for the desired performance.",
        "format": "markdown",
        "sha256": "bf58922ef6b21a3b12f27d0f2dc3f5a673648f8eb0b3082284cdd3b5b772d8a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening the clocked transistors improves speed because it lowers their resistance, but omits the topology-specific charge-sharing effect and its acceptable limit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2243,
        "output_tokens": 127,
        "total_tokens": 2370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2243,
        "output_tokens": 127,
        "total_tokens": 2370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The correct Answer is:$ (\\#\\#RE{S}_{S}CEWC{S}_{P}H{Y}_{X}I{I}_{C}{01}_{E}{01}_{117}\\_A01\\#\\#)$",
        "format": "markdown",
        "sha256": "9311a6df993df1fe06a7888d0979ebe2371e9ecca4c84fc759e16267bddc699a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer is unintelligible and does not identify or analyze the dynamic-latch divide-by-two circuit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 55,
        "total_tokens": 1760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 55,
        "total_tokens": 1760,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The correct Answer is:$ (\\#\\#RE{S}_{S}CEWC{S}_{P}H{Y}_{X}I{I}_{C}{01}_{E}{01}_{117}\\_A01\\#\\#)$\n\n$ \\begin{array}{cccc}A& B& C& D\\\\ 0& 0& 0& 1\\\\ 0& 1& 1& 0\\\\ 1& 0& 1& 0\\\\ 1& 1& 0& 1\\end{array}$",
        "format": "markdown",
        "sha256": "e419be192512b9bea9d8ff516cce63793a6d6550ed81d325ddae141486c7d9ef"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer gives an unrelated truth table and does not identify or analyze the dynamic-latch divide-by-two circuit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 124,
        "total_tokens": 1829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 124,
        "total_tokens": 1829,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The correct Answer is:$ (\\#\\#RE{S}_{S}CEWC{S}_{P}H{Y}_{X}I{I}_{C}{01}_{E}{01}_{171}\\_A01\\#\\#)$\n\nHere $ C{K}_{1}$ is $ \\text{XOR}$ gate and $ C{K}_{2}$ is $ \\text{XNOR}$ gate.",
        "format": "markdown",
        "sha256": "1fc21500b09899e01fe03c2a711b3d9221b9d20f6306d5c1657ea61c9428c8cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify the dynamic-latch divide-by-two function and instead makes unsupported XOR/XNOR claims about CK1 and CK2.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 90,
        "total_tokens": 1795,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1705,
        "output_tokens": 90,
        "total_tokens": 1795,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter introduces a delay in the signal propagation, which can affect the overall performance of the circuit. Additionally, the inverter may also introduce noise and distortion in the signal, which can further degrade the performance.",
        "format": "markdown",
        "sha256": "86a9bd263fa9725bac02c7eb2283740e9842f5d2740f8f1b25245df1c2cd4f26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misses the feedforward path that bypasses part of the latch and improves high-speed operation, as well as the low-frequency drawback that raises the minimum usable clock frequency. The generic claim that the inverter adds delay and degrades performance does not describe the circuit’s dominant behavior.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 43,
        "total_tokens": 1832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 43,
        "total_tokens": 1832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter introduces a delay in the signal propagation, which can affect the overall performance of the circuit. Additionally, the inverter may also introduce noise and distortion in the signal, which can further degrade the performance.",
        "format": "markdown",
        "sha256": "86a9bd263fa9725bac02c7eb2283740e9842f5d2740f8f1b25245df1c2cd4f26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misses the feedforward path that bypasses part of the latch and improves high-speed operation, as well as the low-frequency drawback that raises the minimum usable clock frequency. The generic claim that the inverter adds delay and degrades performance does not describe the circuit’s dominant behavior.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 43,
        "total_tokens": 1832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 43,
        "total_tokens": 1832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter introduces a delay in the signal propagation, which can affect the overall performance of the circuit. Additionally, the inverter may also introduce noise and distortion in the signal, which can further degrade the performance.",
        "format": "markdown",
        "sha256": "86a9bd263fa9725bac02c7eb2283740e9842f5d2740f8f1b25245df1c2cd4f26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misses the feedforward path that bypasses part of the latch and improves high-speed operation, as well as the low-frequency drawback that raises the minimum usable clock frequency. The generic claim that the inverter adds delay and degrades performance does not describe the circuit’s dominant behavior.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 43,
        "total_tokens": 1832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 43,
        "total_tokens": 1832,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is not a keeper. It is part of a transmission gate, which is used to pass the signal from `Inv1` to the output when the clock signal `CK` is high. When `CK` is low, the transmission gate is off, and the output is isolated from `Inv1`. This allows the output to maintain its state even when the clock is not active, which is important for maintaining data integrity in a flip-flop or latch. The red inverter is not specifically designed to address leakage current issues, but rather to ensure proper signal transmission and isolation.",
        "format": "markdown",
        "sha256": "c1f7e50fd2ca9b1b64e2f5bba7b668bc9cd1d15c955292bee00c50c22fe5c1f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation, but misidentifies the red inverter as part of a transmission gate. It misses its actual feedforward role, the bypass path, and the high-speed/low-speed tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 121,
        "total_tokens": 1955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 121,
        "total_tokens": 1955,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is not a keeper. It is part of a transmission gate, which is used to control the flow of data through the latch. The transmission gate is closed when the clock signal is low, preventing data from entering or exiting the latch. When the clock signal is high, the transmission gate opens, allowing data to flow through the latch.\n\nThe minimum clock frequency requirement is not removed by the red inverter. It is determined by the leakage current of the latch and the required data retention time. The red inverter does not affect the leakage current or the data retention time.\n\nTherefore, the answer is incorrect. The red inverter is part of a transmission gate, not a keeper. It does not remove the minimum clock frequency requirement due to leakage.",
        "format": "markdown",
        "sha256": "7cd5702133fe27e57de7c14024c324a0d35595690120265213fb0b41dafaaea1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It correctly rejects the keeper interpretation, but misidentifies the red inverter as part of a transmission gate and attributes the minimum-frequency limit to leakage. It misses the actual feedforward branch and its low-frequency interference with the latch.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 150,
        "total_tokens": 1984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 150,
        "total_tokens": 1984,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The red inverter is not a keeper. A keeper is typically a small PMOS transistor that is used to maintain the state of a node in a circuit, especially in the context of dynamic logic or to prevent floating nodes. It is usually connected between the node and Vdd.\n\nIn the given figure, the red inverter is part of a static flip-flop design. It, along with `Inv1`, forms a cross-coupled inverter pair, which is the fundamental bistable element in a static flip-flop. This pair allows the flip-flop to store a bit of information as long as power is applied.\n\nThe statement about removing the minimum clock frequency requirement due to leakage is not directly related to the role of the red inverter. Leakage current can cause stored values in flip-flops to degrade over time, especially in low-power or high-density designs. Techniques to mitigate this include using stronger inverters, adding keeper devices, or employing other circuit-level strategies. The red inverter, as part of the cross-coupled pair, contributes to the stability of the stored value but does not specifically address leakage-related minimum clock frequency requirements.",
        "format": "markdown",
        "sha256": "b6a4e5a8c0cfcb339a27cab3c50ee37cd616778a6575e96b95b144f9621b6900"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly claims the red inverter is cross-coupled with Inv1, repeating the mistaken topology. It misses the actual feedforward path, its high-speed benefit, and its low-frequency tradeoff.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 233,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 233,
        "total_tokens": 2067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while maintaining Rin at 50 Ohm, we need to consider the noise contributions from each component and their impact on the overall NF. Here's a step-by-step approach:\n\n1. **Identify Noise Sources**: The main noise sources in the circuit are the resistors (Rin, RF, M1, M2) and the capacitor (C1). Each resistor contributes thermal noise, and the capacitor can introduce noise due to its dielectric properties.\n\n2. **Calculate Noise Contributions**:\n   - **Thermal Noise**: For resistors, the noise voltage is given by \\( V_n = \\sqrt{4kTR\\Delta f} \\), where \\( k \\) is Boltzmann's constant, \\( T \\) is the temperature, \\( R \\) is the resistance, and \\( \\Delta f \\) is the bandwidth.\n   - **Capacitor Noise**: The noise from the capacitor is typically negligible compared to resistor noise in most practical scenarios.\n\n3. **Optimize Resistor Values**:\n   - **Rin**: Since Rin must remain 50 Ohm, we cannot change its value.\n   - **RF**: The feedback resistor RF can be adjusted to minimize the overall NF. A lower RF will reduce the gain of the circuit, which can help in reducing the noise contribution from the feedback network.\n   - **M1 and M2**: These are likely MOSFETs or other active devices. Their noise characteristics (e.g., channel noise, flicker noise) should be considered. Typically, larger devices have lower noise, but they also have higher capacitance, which can affect the circuit's bandwidth and stability.\n\n4. **Consider Bandwidth**: The bandwidth of the circuit affects the noise figure. A narrower bandwidth will reduce the noise power, but it may also limit the circuit's performance in terms of frequency response.\n\n5. **Simulation and Iteration**: Use circuit simulation tools to model the circuit with different values of RF, M1, and M2. Adjust these parameters to find the optimal configuration that minimizes the NF while maintaining Rin at 50 Ohm.\n\n6. **Final Adjustments**: After simulation, make final adjustments to the component values to ensure the circuit meets all performance criteria, including NF, gain, and bandwidth.\n\nBy following these steps, you can optimize the circuit for the lowest possible noise figure while keeping Rin at 50 Ohm.",
        "format": "markdown",
        "sha256": "e455baba1683464148853a9d9fcb0dd1402499343bceef237691cd15d0d303fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the key finite-output-resistance mechanism: it neither explains how to keep Rin at 50 Ω while increasing gm nor how that can lower NF. Its generic noise advice and suggestion to lower RF do not establish a match and are misleading for this circuit.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 501,
        "total_tokens": 2205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 501,
        "total_tokens": 2205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while maintaining Rin at 50 Ohm, we need to consider the noise contributions from each component and their impact on the overall NF. Here's a step-by-step approach:\n\n1. **Identify Noise Sources**: The main noise sources in the circuit are the resistors (Rin, RF, M1, M2) and the capacitor (C1). Each resistor contributes thermal noise, and the capacitor can introduce noise due to its dielectric properties.\n\n2. **Calculate Noise Contributions**:\n   - **Thermal Noise**: For resistors, the noise voltage is given by \\( V_n = \\sqrt{4kTR\\Delta f} \\), where \\( k \\) is Boltzmann's constant, \\( T \\) is the temperature, \\( R \\) is the resistance, and \\( \\Delta f \\) is the bandwidth.\n   - **Capacitor Noise**: The noise from the capacitor is typically negligible compared to resistor noise in most practical scenarios.\n\n3. **Optimize Resistor Values**:\n   - **Rin**: Since Rin must remain 50 Ohm, we cannot change its value.\n   - **RF**: The feedback resistor RF can be adjusted to minimize the overall NF. A lower RF will reduce the gain of the circuit, which can help in reducing the noise contribution from the feedback network.\n   - **M1 and M2**: These are likely MOSFETs or other active devices. Their noise characteristics (e.g., channel noise, flicker noise) should be considered. Typically, larger devices have lower noise, but they also have higher capacitance, which can affect the circuit's bandwidth and stability.\n\n4. **Consider Bandwidth**: The bandwidth of the circuit affects the noise figure. A narrower bandwidth will reduce the noise power, but it may also limit the circuit's performance in terms of frequency response.\n\n5. **Simulation and Iteration**: Use circuit simulation tools to model the circuit with different values of RF, M1, and M2. Adjust these parameters to find the optimal configuration that minimizes the NF while maintaining Rin at 50 Ohm.\n\n6. **Final Adjustments**: After simulation, make final adjustments to the component values to ensure the circuit meets all performance criteria, including NF, gain, and bandwidth.\n\nBy following these steps, you can optimize the circuit for the lowest possible noise figure while keeping Rin at 50 Ohm.",
        "format": "markdown",
        "sha256": "e455baba1683464148853a9d9fcb0dd1402499343bceef237691cd15d0d303fb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the key finite-output-resistance mechanism: it neither explains how to keep Rin at 50 Ω while increasing gm nor how that can lower NF. Its generic noise advice and suggestion to lower RF do not establish a match and are misleading for this circuit.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 501,
        "total_tokens": 2205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 501,
        "total_tokens": 2205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for noise figure (NF) while maintaining Rin at 50 Ohm, we need to consider the noise contributions from each component. The noise figure is a measure of degradation of the signal-to-noise ratio (SNR) caused by components in a radio frequency (RF) signal chain.\n\n1. **Identify Noise Sources**: The main noise sources in this circuit are the resistors (Rin and RF) and the capacitor (C1). The noise from the resistors is thermal noise, and the noise from the capacitor is typically negligible at RF frequencies.\n\n2. **Thermal Noise**: The thermal noise power spectral density for a resistor is given by \\(4kTR\\), where \\(k\\) is Boltzmann's constant, \\(T\\) is the temperature in Kelvin, and \\(R\\) is the resistance. Since Rin is fixed at 50 Ohm, we cannot change its noise contribution. However, we can optimize RF to minimize its noise contribution.\n\n3. **Optimize RF**: To minimize the noise figure, we should choose RF such that it is much larger than Rin. This is because the noise figure of an amplifier is approximately given by \\(NF \\approx 1 + \\frac{RF}{Rin}\\). By making RF much larger than Rin, we minimize the noise contribution from RF.\n\n4. **Capacitor C1**: The capacitor C1 is typically used for AC coupling and does not significantly contribute to the noise figure at RF frequencies. However, its value should be chosen such that it does not introduce significant reactance at the frequencies of interest, which could affect the overall performance of the circuit.\n\n5. **Final Optimization**: Given that Rin is fixed at 50 Ohm, the best way to optimize the circuit for NF is to choose RF to be as large as possible while still maintaining the desired gain and bandwidth. The exact value of RF will depend on the specific requirements of the circuit, but a common choice might be in the range of a few kilohms to tens of kilohms.\n\nThe final answer, considering the above steps, is:\n\n\\boxed{RF \\gg 50 \\text{ Ohm}}",
        "format": "markdown",
        "sha256": "f3ddd7bfb532772b612bf10987ecc620478bd43205d3b352603a5e21961f3f1b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer gives an incorrect noise-factor formula and contradictory advice about increasing RF. It misses the key optimization: raise gm above 1/50 Ω and adjust RF to keep Rin at 50 Ω, allowing NF to fall below 1 + γ.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 447,
        "total_tokens": 2151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 447,
        "total_tokens": 2151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we need to analyze the circuit step by step. The circuit consists of several components: resistors, capacitors, and inductors. We will use the rules of series and parallel combinations of impedances to find the input impedance.\n\n1. **Identify the components and their impedances:**\n   - Resistors: \\( R_1, R_2, R_F \\)\n   - Capacitors: \\( C_{in} \\)\n   - Inductors: \\( M_1, M_2, M_3 \\)\n\n2. **Convert the inductors and capacitors to their impedance forms:**\n   - The impedance of a capacitor \\( C \\) is given by \\( Z_C = \\frac{1}{j\\omega C} \\).\n   - The impedance of an inductor \\( L \\) is given by \\( Z_L = j\\omega L \\).\n\n3. **Analyze the circuit step by step:**\n   - The inductor \\( M_1 \\) is in series with the resistor \\( R_F \\). The total impedance of this combination is \\( Z_{M1} + R_F \\).\n   - The inductor \\( M_2 \\) is in series with the combination of \\( M_1 \\) and \\( R_F \\). The total impedance of this combination is \\( Z_{M2} + (Z_{M1} + R_F) \\).\n   - The inductor \\( M_3 \\) is in series with the combination of \\( M_2 \\), \\( M_1 \\), and \\( R_F \\). The total impedance of this combination is \\( Z_{M3} + (Z_{M2} + (Z_{M1} + R_F)) \\).\n   - The resistor \\( R_2 \\) is in parallel with the combination of \\( M_3 \\), \\( M_2 \\), \\( M_1 \\), and \\( R_F \\). The total impedance of this combination is \\( \\frac{R_2 \\cdot (Z_{M3} + (Z_{M2} + (Z_{M1} + R_F)))}{R_2 + (Z_{M3} + (Z_{M2} + (Z_{M1} + R_F)))} \\).\n   - The resistor \\( R_1 \\) is in series with the combination of \\( R_2 \\), \\( M_3 \\), \\( M_2 \\), \\( M_1 \\), and \\( R_F \\). The total impedance of this combination is \\( R_1 + \\frac{R_2 \\cdot (Z_{M3} + (Z_{M2} + (Z_{M1} + R_F)))}{R_2 + (Z_{M3} + (Z_{M2} + (Z_{M1} + R_F)))} \\).\n   - The capacitor \\( C_{in} \\) is in parallel with the combination of \\( R_1 \\), \\( R_2 \\), \\( M_3 \\), \\( M_2 \\), \\( M_1 \\), and \\( R_F \\). The total impedance of this combination is \\( \\frac{1}{j\\omega C_{in}} + R_1 + \\frac{R_2 \\cdot (Z_{M3} + (Z_{M2} + (Z_{M1} + R_F)))}{R_2 + (Z_{M3} + (Z_{M2} + (Z_{M1} + R_F)))} \\).\n\n4. **Simplify the expression:**\n   - The input impedance \\( Z_{in} \\) is the total impedance seen at the input terminals of the circuit. After simplifying the expression, we get:\n     \\[\n     Z_{in} = R_1 + \\frac{R_2 \\cdot (j\\omega M_3 + (j\\omega M_2 + (j\\omega M_1 + R_F)))}{R_2 + (j\\omega M_3 + (j\\omega M_2 + (j\\omega M_1 + R_F)))} + \\frac{1}{j\\omega C_{in}}\n     \\]\n\n5. **Final answer:**\n   The input impedance of the circuit is:\n   \\[\n   \\boxed{R_1 + \\frac{R_2 \\cdot (j\\omega M_3 + (j\\omega M_2 + (j\\omega M_1 + R_F)))}{R_2 + (j\\omega M_3 + (j\\omega M_2 + (j\\omega M_1 + R_F)))} + \\frac{1}{j\\omega C_{in}}}\n   \\]",
        "format": "markdown",
        "sha256": "c936a7e9e11be96a31e45ded77230e352ef4355d9b889d281cb6e526c37fb453"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the TIA as a network of resistors, capacitors, and inductors, then gives an unrelated impedance expression. It misses the feedback topology and the required Miller-theorem result.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1690,
        "output_tokens": 1024,
        "total_tokens": 2714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1690,
        "output_tokens": 1024,
        "total_tokens": 2714,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we need to analyze the circuit step by step. The circuit consists of several components: resistors, capacitors, and an operational amplifier (op-amp). Let's break it down:\n\n1. **Identify the Op-Amp Configuration**: The op-amp is configured as a non-inverting amplifier. The non-inverting input is connected to a voltage divider formed by \\(R_D1\\) and \\(R_D2\\), and the inverting input is connected to the output through a feedback network.\n\n2. **Determine the Feedback Network**: The feedback network consists of \\(M_2\\) and \\(M_3\\). Since \\(M_2\\) and \\(M_3\\) are in series, their combined impedance is simply the sum of their individual impedances. However, since they are likely to be resistors (as typically denoted by \\(M\\) in circuit diagrams), we can treat them as \\(R_2\\) and \\(R_3\\) respectively. The total feedback resistance is \\(R_F = R_2 + R_3\\).\n\n3. **Calculate the Gain of the Op-Amp**: The gain of the non-inverting amplifier is given by:\n   \\[\n   A_v = 1 + \\frac{R_F}{R_{in}}\n   \\]\n   where \\(R_{in}\\) is the input resistance seen by the inverting input. Since the inverting input is connected to the output through \\(R_F\\), the input resistance \\(R_{in}\\) is effectively \\(R_F\\) in parallel with the input impedance of the op-amp, which is very high and can be ignored for practical purposes. Therefore, the gain simplifies to:\n   \\[\n   A_v = 1 + \\frac{R_F}{R_{in}} \\approx 1 + \\frac{R_F}{R_{in}} = 1 + \\frac{R_2 + R_3}{R_{in}}\n   \\]\n\n4. **Determine the Input Impedance**: The input impedance of the circuit is the impedance seen at the input terminal \\(V_{in}\\). The input impedance of the op-amp itself is very high, so the input impedance of the circuit is primarily determined by the resistor \\(R_{in}\\) in series with the capacitor \\(C_{in}\\). The capacitor \\(C_{in}\\) provides a frequency-dependent impedance, but at low frequencies, it can be considered as an open circuit. Therefore, the input impedance is simply \\(R_{in}\\).\n\n5. **Final Answer**: The input impedance of the circuit is:\n   \\[\n   \\boxed{R_{in}}\n   \\]",
        "format": "markdown",
        "sha256": "a46eddc472278d688b32a3eede30c8631a2a31d60b862e758a4984740958ca42"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the TIA as a non-inverting op-amp and invents components and connections. It omits the Miller-theorem result, Rin = (RF + RD2)/(1 + A0), and does not compute the input impedance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1690,
        "output_tokens": 565,
        "total_tokens": 2255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1690,
        "output_tokens": 565,
        "total_tokens": 2255,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we need to analyze the circuit step by step. The circuit consists of several components: resistors, capacitors, and inductors. We will use the rules of series and parallel combinations of impedances to find the input impedance.\n\n1. **Identify the components and their impedances:**\n   - \\( R_1 \\) is a resistor with impedance \\( R_1 \\).\n   - \\( C_{in} \\) is a capacitor with impedance \\( \\frac{1}{j\\omega C_{in}} \\).\n   - \\( R_{in} \\) is a resistor with impedance \\( R_{in} \\).\n   - \\( M_1 \\) is an inductor with impedance \\( j\\omega M_1 \\).\n   - \\( M_2 \\) is an inductor with impedance \\( j\\omega M_2 \\).\n   - \\( M_3 \\) is an inductor with impedance \\( j\\omega M_3 \\).\n   - \\( R_F \\) is a resistor with impedance \\( R_F \\).\n   - \\( R_{D2} \\) is a resistor with impedance \\( R_{D2} \\).\n\n2. **Combine the impedances in series and parallel:**\n   - The impedance of the series combination of \\( R_1 \\) and \\( C_{in} \\) is \\( R_1 + \\frac{1}{j\\omega C_{in}} \\).\n   - The impedance of the series combination of \\( R_{in} \\) and \\( M_1 \\) is \\( R_{in} + j\\omega M_1 \\).\n   - The impedance of the parallel combination of \\( M_2 \\) and \\( M_3 \\) is \\( \\frac{j\\omega M_2 \\cdot j\\omega M_3}{j\\omega M_2 + j\\omega M_3} = \\frac{M_2 M_3}{M_2 + M_3} \\).\n   - The impedance of the series combination of \\( R_F \\) and \\( R_{D2} \\) is \\( R_F + R_{D2} \\).\n\n3. **Combine the impedances in the overall circuit:**\n   - The impedance of the series combination of \\( R_1 + \\frac{1}{j\\omega C_{in}} \\) and \\( R_{in} + j\\omega M_1 \\) is \\( R_1 + \\frac{1}{j\\omega C_{in}} + R_{in} + j\\omega M_1 \\).\n   - The impedance of the parallel combination of this series combination and the parallel combination of \\( M_2 \\) and \\( M_3 \\) is:\n     \\[\n     \\frac{\\left( R_1 + \\frac{1}{j\\omega C_{in}} + R_{in} + j\\omega M_1 \\right) \\cdot \\frac{M_2 M_3}{M_2 + M_3}}{R_1 + \\frac{1}{j\\omega C_{in}} + R_{in} + j\\omega M_1 + \\frac{M_2 M_3}{M_2 + M_3}}\n     \\]\n   - The impedance of the series combination of this parallel combination and \\( R_F + R_{D2} \\) is:\n     \\[\n     \\frac{\\left( R_1 + \\frac{1}{j\\omega C_{in}} + R_{in} + j\\omega M_1 \\right) \\cdot \\frac{M_2 M_3}{M_2 + M_3}}{R_1 + \\frac{1}{j\\omega C_{in}} + R_{in} + j\\omega M_1 + \\frac{M_2 M_3}{M_2 + M_3}} + R_F + R_{D2}\n     \\]\n\n4. **Simplify the expression:**\n   - The input impedance of the circuit is the impedance seen at the input terminals, which is the impedance of the series combination of \\( R_1 + \\frac{1}{j\\omega C_{in}} \\) and \\( R_{in} + j\\omega M_1 \\) in parallel with the parallel combination of \\( M_2 \\) and \\( M_3 \\) in series with \\( R_F + R_{D2} \\).\n\nThe final input impedance of the circuit is:\n\\[\n\\boxed{R_{in} + j\\omega M_1 + \\frac{1}{j\\omega C_{in}} + \\frac{R_F + R_{D2}}{1 + \\frac{\\omega^2 M_1 M_2 M_3}{R_{in} (M_2 + M_3) + R_1 (M_2 + M_3) + \\frac{M_2 M_3}{C_{in}} + \\omega^2 M_1 M_2 M_3}}}\n\\]",
        "format": "markdown",
        "sha256": "d8482fe45430b716449e5796243e15bc43b89f6eb25de9769d67a4aa6d5e9927"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as an RLC network and gives an unrelated impedance expression. It misses the two-stage amplifier model and the required Miller result, Rin = (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1690,
        "output_tokens": 1068,
        "total_tokens": 2758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1690,
        "output_tokens": 1068,
        "total_tokens": 2758,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise due to the thermal noise from the LDO regulator, we need to follow these steps:\n\n1. **Identify the noise source and its impact**:\n   - The LDO regulator introduces thermal noise with a spectrum \\( S_{th} \\).\n   - This noise will be superimposed on the control voltage \\( V_{cont} \\) of the VCO.\n\n2. **Determine the transfer function of the VCO**:\n   - The VCO has a transfer function that relates the control voltage to the output frequency. This can be expressed as:\n     \\[\n     \\frac{\\Delta f}{f} = K_{VCO} \\cdot \\Delta V_{cont}\n     \\]\n     where \\( K_{VCO} \\) is the VCO gain in Hz/V.\n\n3. **Convert voltage noise to frequency noise**:\n   - The thermal noise \\( S_{th} \\) in the control voltage will cause a corresponding frequency noise in the VCO output. The power spectral density of the frequency noise \\( S_f \\) can be found by:\n     \\[\n     S_f = (K_{VCO})^2 \\cdot S_{th}\n     \\]\n\n4. **Convert frequency noise to phase noise**:\n   - Phase noise is related to frequency noise by the relationship:\n     \\[\n     L(\\Delta f) = 10 \\log_{10} \\left( \\frac{S_f}{f^2} \\right)\n     \\]\n     where \\( L(\\Delta f) \\) is the phase noise in dBc/Hz at an offset frequency \\( \\Delta f \\) from the carrier frequency \\( f \\).\n\n5. **Final expression for phase noise**:\n   - Combining the above steps, the phase noise due to the LDO regulator's thermal noise can be expressed as:\n     \\[\n     L(\\Delta f) = 10 \\log_{10} \\left( \\frac{(K_{VCO})^2 \\cdot S_{th}}{f^2} \\right)\n     \\]\n\nThus, the VCO output phase noise due to the LDO regulator's thermal noise is given by:\n\\[\n\\boxed{10 \\log_{10} \\left( \\frac{(K_{VCO})^2 \\cdot S_{th}}{f^2} \\right)}\n\\]",
        "format": "markdown",
        "sha256": "ffe37900dff469073eda3eb3f542dca35719c2a20e8c89ff8c313d9999441f4f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that voltage noise can produce frequency noise and then phase noise, but it treats the LDO noise as control-voltage noise rather than using the supply-pushing sensitivity and uses the carrier frequency instead of the offset frequency in the phase-noise conversion. Thus it misses the required 1/Δf² dependence and gives an incorrect result.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1608,
        "output_tokens": 495,
        "total_tokens": 2103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1608,
        "output_tokens": 495,
        "total_tokens": 2103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise, we need to consider the noise sources in the circuit and their impact on the VCO output. The thermal noise from the LDO regulator is one of the noise sources that can affect the VCO output phase noise.\n\nThe VCO output phase noise can be calculated using the following formula:\n\nL(f) = 10 * log10((Sth / (2 * pi * f))^2 * (1 / (2 * Q * f))^2)\n\nwhere L(f) is the VCO output phase noise in dBc/Hz, Sth is the thermal noise spectrum, f is the frequency offset from the VCO carrier frequency, and Q is the quality factor of the VCO.\n\nTo calculate the VCO output phase noise, we need to know the values of Sth, f, and Q. The value of Sth can be obtained from the LDO regulator datasheet or by measuring the noise spectrum at the VCO input. The value of f can be chosen based on the desired frequency offset from the VCO carrier frequency. The value of Q can be obtained from the VCO datasheet or by measuring the VCO output spectrum.\n\nOnce we have the values of Sth, f, and Q, we can substitute them into the formula to calculate the VCO output phase noise.\n\nTherefore, the VCO output phase noise can be calculated using the formula L(f) = 10 * log10((Sth / (2 * pi * f))^2 * (1 / (2 * Q * f))^2), where Sth is the thermal noise spectrum, f is the frequency offset from the VCO carrier frequency, and Q is the quality factor of the VCO.\nThe answer is L(f) = 10 * log10((Sth / (2 * pi * f))^2 * (1 / (2 * Q * f))^2)",
        "format": "markdown",
        "sha256": "5f4d83f9d3b686e2b3b96694ba155168465619ca3b1a436441b501f8a2d7a81b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The formula uses a Q-based oscillator-noise expression and omits the essential supply-pushing sensitivity, Kpush = df/dVout. It therefore does not convert the LDO noise through frequency modulation into phase noise with the required 1/Δf² dependence.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1608,
        "output_tokens": 397,
        "total_tokens": 2005,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1608,
        "output_tokens": 397,
        "total_tokens": 2005,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise, we need to consider the noise sources in the circuit and their impact on the VCO output. The LDO regulator generates thermal noise with spectrum Sth, which can be modeled as a noise current source in parallel with the VDD supply. This noise current will flow through the VCO circuit and affect the VCO output phase noise.\n\nThe VCO output phase noise can be calculated using the following steps:\n\n1. Determine the noise current spectrum at the VDD supply due to the LDO regulator thermal noise. This can be done by multiplying the LDO regulator thermal noise spectrum Sth by the VDD supply impedance.\n\n2. Calculate the noise current spectrum at the VCO input due to the noise current at the VDD supply. This can be done by considering the noise current transfer function from the VDD supply to the VCO input.\n\n3. Calculate the VCO output phase noise spectrum due to the noise current at the VCO input. This can be done by considering the VCO phase noise transfer function from the VCO input to the VCO output.\n\n4. Integrate the VCO output phase noise spectrum over the frequency range of interest to obtain the total VCO output phase noise.\n\nThe final answer for the VCO output phase noise will depend on the specific circuit parameters and noise sources in the circuit. However, the general approach for calculating the VCO output phase noise is outlined above.\nThe VCO output phase noise can be calculated by considering the noise sources in the circuit and their impact on the VCO output. The LDO regulator thermal noise is one of the noise sources that can affect the VCO output phase noise. The VCO output phase noise can be calculated by following the steps outlined above.",
        "format": "markdown",
        "sha256": "6d8a32f743df7f339819310b680e4dc3119c555b7207271f2b45b8cd91c4eede"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer only gives a generic noise-transfer procedure and does not identify supply pushing, the df/dVout sensitivity, or FM-to-phase conversion with its 1/Δf² dependence. Its current-source and VCO-input framing is also not the key mechanism in this circuit.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1608,
        "output_tokens": 355,
        "total_tokens": 1963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1608,
        "output_tokens": 355,
        "total_tokens": 1963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise is reduced by the amount of the current through CT. This is because the current through CT provides a negative feedback path for the phase noise, which helps to cancel out the phase noise and improve the overall phase noise performance of the circuit.",
        "format": "markdown",
        "sha256": "adbd560e374beea8e8e4211f21cf72dd71246481d95c104dfdb475d3fd63f7b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims a monotonic phase-noise improvement from CT, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2238,
        "output_tokens": 51,
        "total_tokens": 2289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2238,
        "output_tokens": 51,
        "total_tokens": 2289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise is reduced by the amount of the current through CT. This is because the current through CT provides a negative feedback path for the phase noise, which helps to cancel out the phase noise and improve the overall phase noise performance of the circuit.",
        "format": "markdown",
        "sha256": "adbd560e374beea8e8e4211f21cf72dd71246481d95c104dfdb475d3fd63f7b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims a monotonic phase-noise improvement from CT, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2238,
        "output_tokens": 51,
        "total_tokens": 2289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2238,
        "output_tokens": 51,
        "total_tokens": 2289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The phase noise is reduced by the amount of the current through CT. This is because the current through CT provides a negative feedback path for the phase noise, which helps to cancel out the phase noise and improve the overall phase noise performance of the circuit.",
        "format": "markdown",
        "sha256": "adbd560e374beea8e8e4211f21cf72dd71246481d95c104dfdb475d3fd63f7b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims a monotonic phase-noise improvement from CT, missing the nonmonotonic behavior and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2238,
        "output_tokens": 51,
        "total_tokens": 2289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2238,
        "output_tokens": 51,
        "total_tokens": 2289,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the circuit, we need to identify the type of oscillator and the components involved. The circuit appears to be a differential pair oscillator, which is commonly used in RF and microwave applications. The oscillation frequency is determined by the tank circuit, which consists of inductors and capacitors.\n\n1. **Identify the Tank Circuit**: The tank circuit in this differential pair oscillator is formed by the inductors (L1, L2) and capacitors (C1, C2) connected to the differential pair transistors.\n\n2. **Calculate the Resonance Frequency**: The resonance frequency (f) of a tank circuit is given by the formula:\n   \\[\n   f = \\frac{1}{2\\pi\\sqrt{LC}}\n   \\]\n   where L is the inductance and C is the capacitance.\n\n3. **Assume Values for L and C**: Since the specific values of L and C are not provided, we will assume typical values for a differential pair oscillator. Let's assume L = 10 nH and C = 10 pF.\n\n4. **Substitute the Values**:\n   \\[\n   f = \\frac{1}{2\\pi\\sqrt{10 \\times 10^{-9} \\times 10 \\times 10^{-12}}} = \\frac{1}{2\\pi\\sqrt{100 \\times 10^{-21}}} = \\frac{1}{2\\pi \\times 10^{-10}} = \\frac{1}{2\\pi \\times 10^{-10}} \\approx 1.59 \\text{ GHz}\n   \\]\n\nThe oscillation frequency of the circuit is approximately \\boxed{1.59 \\text{ GHz}}.",
        "format": "markdown",
        "sha256": "270ceaf198db9d7ae511305b9a8e49222ed5360d0e92d6de71e3fbff6faf9f70"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives the basic LC tank resonance, but omits the essential coupling-induced frequency shift and invents component values, so the stated numerical frequency is unsupported.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 370,
        "total_tokens": 2091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 370,
        "total_tokens": 2091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The oscillation frequency of the circuit can be estimated using the formula for the resonant frequency of a tank circuit, which is given by f = 1/(2π√(L1C1)), where L1 and C1 are the inductance and capacitance of the tank circuit, respectively. In this case, the tank circuit consists of the inductors and capacitors in the two branches of the circuit. By calculating the resonant frequency for each branch and taking the average, we can estimate the oscillation frequency of the circuit.",
        "format": "markdown",
        "sha256": "8079e6418db983ee57c72e5fce423dcc0ee97bd270a383172fcb1307af3d7cc1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the tank resonance as a baseline, but misses the coupling-induced frequency shift that is central to the estimate; averaging the branch resonances does not capture it.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 106,
        "total_tokens": 1827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 106,
        "total_tokens": 1827,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "default",
        "api_model": "amazon/nova-pro-v1",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To estimate the oscillation frequency of the circuit, we need to analyze the components and their interactions. The circuit appears to be a differential amplifier with feedback, which can lead to oscillations under certain conditions.\n\n1. **Identify the components and their roles:**\n   - The circuit consists of two differential amplifiers (X1 and X2) with feedback loops.\n   - Each differential amplifier has a pair of transistors and resistors.\n   - The feedback loops are formed by the resistors and capacitors connected between the output and input of each amplifier.\n\n2. **Determine the conditions for oscillation:**\n   - For oscillations to occur, the loop gain of the feedback loop must be greater than 1 at a certain frequency, and the phase shift around the loop must be 360 degrees (or 0 degrees) at that frequency.\n   - The loop gain is the product of the gain of the amplifier and the transfer function of the feedback network.\n\n3. **Estimate the frequency of oscillation:**\n   - The frequency of oscillation is determined by the time constants of the feedback network.\n   - The time constant of a feedback network with a resistor and capacitor is given by τ = RC.\n   - The frequency of oscillation is approximately the inverse of the time constant, f ≈ 1/(2πτ).\n\n4. **Calculate the time constant:**\n   - Assume the values of the resistors and capacitors in the feedback network are known or can be estimated.\n   - For example, if the resistor is 1 kΩ and the capacitor is 1 nF, the time constant is τ = 1 kΩ * 1 nF = 1 μs.\n   - The frequency of oscillation is then f ≈ 1/(2π * 1 μs) ≈ 159 kHz.\n\n5. **Consider the effect of the differential amplifiers:**\n   - The gain of the differential amplifiers and the phase shift they introduce will also affect the frequency of oscillation.\n   - However, without specific values for the components, we can only estimate the frequency based on the feedback network.\n\nGiven the complexity of the circuit and the lack of specific component values, we can only provide an estimate for the frequency of oscillation. Assuming typical values for the components, the frequency of oscillation is likely in the range of tens to hundreds of kilohertz.\n\n\\boxed{159 \\text{ kHz}}",
        "format": "markdown",
        "sha256": "972e70d5f48bb98ca6f3cda3bbbbfcdfb297f9362c8252e1d6009e5aee154c71"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the LC coupled oscillator as an RC feedback oscillator and invents component values and a frequency. It misses both the tank resonance and the coupling-induced frequency shift.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 487,
        "total_tokens": 2208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 487,
        "total_tokens": 2208,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 0,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    }
  ]
}
