{
  "model_key": "qwen_37_flash",
  "display_name": "Qwen 3.7 Flash",
  "provider": "qwen",
  "evaluation_model_ids": [],
  "thinking_effort": "max",
  "configuration_note": "Qwen 3.7 Flash answered the 50 tasks in three rollouts through OpenRouter's chat completions route (qwen/qwen3.7-flash) at maximum reasoning effort. Requests set temperature to 0 and max_tokens to 65,536, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Qwen 3.7 Flash on 2026-11-10 ($0.03 input, $0.006 cached input, $0.13 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 67,
          "incorrect_count": 83,
          "partial_credit_count": 67,
          "zero_count": 16,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 16,
            "1": 25,
            "2": 29,
            "3": 13,
            "4": 67
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 67,
          "incorrect_count": 83,
          "partial_credit_count": 67,
          "zero_count": 16,
          "mean_score_0_to_4": 2.6,
          "score_percent": 65.0,
          "score_distribution": {
            "0": 16,
            "1": 25,
            "2": 29,
            "3": 13,
            "4": 67
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 61,
          "incorrect_count": 29,
          "partial_credit_count": 15,
          "zero_count": 14,
          "mean_score_0_to_4": 3.033333333333333,
          "score_percent": 75.83333333333333,
          "score_distribution": {
            "0": 14,
            "1": 4,
            "2": 8,
            "3": 3,
            "4": 61
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 61,
          "incorrect_count": 29,
          "partial_credit_count": 15,
          "zero_count": 14,
          "mean_score_0_to_4": 3.033333333333333,
          "score_percent": 75.83333333333333,
          "score_distribution": {
            "0": 14,
            "1": 4,
            "2": 8,
            "3": 3,
            "4": 61
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 6,
          "incorrect_count": 54,
          "partial_credit_count": 52,
          "zero_count": 2,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 2,
            "1": 21,
            "2": 21,
            "3": 10,
            "4": 6
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 6,
          "incorrect_count": 54,
          "partial_credit_count": 52,
          "zero_count": 2,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 2,
            "1": 21,
            "2": 21,
            "3": 10,
            "4": 6
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 23,
        "incorrect_count": 27,
        "partial_credit_count": 22,
        "zero_count": 5,
        "mean_score_0_to_4": 2.64,
        "score_percent": 66.0,
        "score_distribution": {
          "0": 5,
          "1": 6,
          "2": 14,
          "3": 2,
          "4": 23
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 21,
        "incorrect_count": 29,
        "partial_credit_count": 23,
        "zero_count": 6,
        "mean_score_0_to_4": 2.54,
        "score_percent": 63.5,
        "score_distribution": {
          "0": 6,
          "1": 9,
          "2": 8,
          "3": 6,
          "4": 21
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 23,
        "incorrect_count": 27,
        "partial_credit_count": 22,
        "zero_count": 5,
        "mean_score_0_to_4": 2.62,
        "score_percent": 65.5,
        "score_distribution": {
          "0": 5,
          "1": 10,
          "2": 7,
          "3": 5,
          "4": 23
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 2560,
        "input_tokens": 208356,
        "output_tokens": 1643495,
        "total_tokens": 1851851
      },
      "known_totals": {
        "cached_input_tokens": 2560,
        "input_tokens": 208356,
        "output_tokens": 1643495,
        "total_tokens": 1851851
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 20,
          "incorrect_count": 10,
          "partial_credit_count": 6,
          "zero_count": 4,
          "mean_score_0_to_4": 3.033333333333333,
          "score_percent": 75.83333333333333,
          "score_distribution": {
            "0": 4,
            "1": 1,
            "2": 5,
            "4": 20
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 19,
          "incorrect_count": 11,
          "partial_credit_count": 6,
          "zero_count": 5,
          "mean_score_0_to_4": 2.933333333333333,
          "score_percent": 73.33333333333333,
          "score_distribution": {
            "0": 5,
            "1": 2,
            "2": 2,
            "3": 2,
            "4": 19
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 3,
          "zero_count": 5,
          "mean_score_0_to_4": 3.1333333333333333,
          "score_percent": 78.33333333333333,
          "score_distribution": {
            "0": 5,
            "1": 1,
            "2": 1,
            "3": 1,
            "4": 22
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 3,
          "incorrect_count": 17,
          "partial_credit_count": 16,
          "zero_count": 1,
          "mean_score_0_to_4": 2.05,
          "score_percent": 51.24999999999999,
          "score_distribution": {
            "0": 1,
            "1": 5,
            "2": 9,
            "3": 2,
            "4": 3
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 2,
          "incorrect_count": 18,
          "partial_credit_count": 17,
          "zero_count": 1,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 1,
            "1": 7,
            "2": 6,
            "3": 4,
            "4": 2
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 1,
          "incorrect_count": 19,
          "partial_credit_count": 19,
          "zero_count": 0,
          "mean_score_0_to_4": 1.85,
          "score_percent": 46.25,
          "score_distribution": {
            "1": 9,
            "2": 6,
            "3": 4,
            "4": 1
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain doubles**.\n\nHere is the step-by-step breakdown of why this happens, based on the fundamental definitions of MOSFET parameters.\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is defined as the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_v = g_m \\cdot r_o$$\n\n### 2. Effect on Transconductance ($g_m$)\nTransconductance represents the device's ability to convert voltage into current. In the standard long-channel model, $g_m$ is proportional to the aspect ratio ($W/L$) and the overdrive voltage ($V_{OV}$):\n$$g_m \\propto \\frac{W}{L}$$\n\n*   **Original:** Aspect ratio is $\\frac{W}{L}$.\n*   **New:** You double both dimensions, so the new aspect ratio is $\\frac{2W}{2L} = \\frac{W}{L}$.\n\nSince the aspect ratio remains unchanged, **$g_m$ remains constant** (assuming the overdrive voltage $V_{OV}$ is kept constant).\n\n*(Note: Even in short-channel devices where velocity saturation occurs, $g_m$ is primarily proportional to $W$. However, as shown below, the effect of $W$ on gain cancels out.)*\n\n### 3. Effect on Output Resistance ($r_o$)\nOutput resistance represents how much the drain current changes with drain-source voltage. It is primarily determined by the Channel Length Modulation (CLM) effect. The parameter $\\lambda$ (which determines $r_o$) is inversely proportional to the channel length ($L$):\n$$r_o \\approx \\frac{1}{\\lambda I_D} \\quad \\text{where} \\quad \\lambda \\propto \\frac{1}{L}$$\nTherefore:\n$$r_o \\propto L$$\n\n*   **Original:** Resistance is proportional to $L$.\n*   **New:** The length is doubled ($2L$).\n\nConsequently, **$r_o$ doubles**.\n\n### 4. Calculating the New Intrinsic Gain\nNow we combine the changes:\n$$A_{v,new} = g_{m,new} \\cdot r_{o,new}$$\n$$A_{v,new} \\approx g_m \\cdot (2r_o)$$\n$$A_{v,new} = 2 \\cdot (g_m \\cdot r_o) = 2 A_{v,old}$$\n\n### Summary of Intuition\n*   **Doubling the Width ($W$):** Makes the transistor \"wider,\" which increases its drive strength ($g_m$) but also allows more current to flow. This increase in current lowers the output resistance ($r_o$). In the calculation of intrinsic gain ($g_m r_o$), these two effects effectively cancel each other out regarding the width dimension.\n*   **Doubling the Length ($L$):** Makes the channel \"longer.\" This significantly reduces the channel length modulation effect, making the current source \"stiffer\" (higher output resistance). This improvement in $r_o$ directly boosts the gain without negatively impacting the transconductance ratio.\n\n**Conclusion:** The intrinsic gain is primarily a function of the channel length ($L$) and the overdrive voltage ($V_{OV}$). Since $L$ is doubled, the gain doubles.",
        "format": "markdown",
        "sha256": "93f60567761ba70f8394dda66eaf9c86f6a22e9fbbd8c293af3d45f4e2aa17b0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles at fixed overdrive: doubling W/L together leaves gm approximately unchanged, while doubling L increases ro. The additional width and short-channel discussion does not alter the central result.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 8447,
        "total_tokens": 8477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 8447,
        "total_tokens": 8477,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7693,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain approximately doubles**.\n\nHere is the step-by-step breakdown of why this happens, based on the standard long-channel MOSFET model.\n\n### 1. Definition of Intrinsic Gain\nThe intrinsic gain ($A_v$) of a MOSFET is defined as the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_v = g_m \\cdot r_o$$\n\n### 2. Effect on Transconductance ($g_m$)\nTransconductance represents how effectively the gate voltage controls the drain current. For a MOSFET in saturation, $g_m$ is primarily determined by the aspect ratio ($W/L$) and the overdrive voltage ($V_{OV}$).\n\n$$g_m \\propto \\frac{W}{L}$$\n\n*   **The Change:** You are doubling the width ($W \\to 2W$) and doubling the length ($L \\to 2L$).\n*   **The Result:** The new aspect ratio is $\\frac{2W}{2L} = \\frac{W}{L}$.\n*   **Conclusion:** Since the ratio remains unchanged, **$g_m$ remains constant** (assuming the bias current or overdrive voltage is kept constant).\n\n### 3. Effect on Output Resistance ($r_o$)\nOutput resistance is determined by the Channel Length Modulation effect. As the channel length increases, the influence of the drain voltage on the channel pinch-off point decreases, making the current source \"stiffer.\"\n\n$$r_o \\approx \\frac{1}{\\lambda I_D}$$\nWhere $\\lambda$ (the channel-length modulation parameter) is inversely proportional to the channel length ($L$):\n$$\\lambda \\propto \\frac{1}{L} \\implies r_o \\propto L$$\n\n*   **The Change:** You are doubling the length ($L \\to 2L$).\n*   **The Result:** The output resistance is directly proportional to the length.\n*   **Conclusion:** **$r_o$ doubles.**\n\n### 4. Combined Effect on Gain\nNow, substitute these changes back into the gain equation:\n\n$$A_{v(new)} = g_{m(new)} \\cdot r_{o(new)}$$\n$$A_{v(new)} = (g_m) \\cdot (2 \\cdot r_o)$$\n$$A_{v(new)} = 2 \\cdot (g_m \\cdot r_o)$$\n\n**Therefore, the intrinsic gain doubles.**\n\n***\n\n### Summary & Nuances\n*   **Width ($W$):** Increasing width increases current drive but also increases parasitic capacitance. In the calculation of intrinsic gain (DC gain), the increase in width is exactly canceled out by the increase in length regarding $g_m$.\n*   **Length ($L$):** Increasing length is the primary way to improve intrinsic gain because it increases output resistance ($r_o$) without negatively impacting the $W/L$ ratio.\n*   **Assumptions:** This answer assumes the **long-channel model** (square-law behavior). In modern short-channel technologies (deep sub-micron), velocity saturation effects may cause $g_m$ to behave differently, but increasing $L$ generally continues to be the dominant factor for improving gain.",
        "format": "markdown",
        "sha256": "11ec1baf214d1b57bd60c25c35b7a1574e80ff1658f928994c30cd5065a3edce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with both dimensions scaled equally, gm is unchanged under the stated bias assumptions, while ro approximately doubles as channel length increases and drain current remains constant.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 7407,
        "total_tokens": 7437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 7407,
        "total_tokens": 7437,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6687,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "If you double both the length ($L$) and the width ($W$) of a MOSFET, its **intrinsic gain doubles**.\n\nHere is the step-by-step breakdown of why this happens, based on the standard long-channel model used in analog circuit design.\n\n### 1. The Formula for Intrinsic Gain\nThe intrinsic gain ($A_{v0}$) of a MOSFET is defined as the product of its transconductance ($g_m$) and its output resistance ($r_o$):\n$$A_{v0} = g_m \\cdot r_o$$\n\n### 2. Effect on Transconductance ($g_m$)\nTransconductance represents how effectively the gate voltage controls the drain current. In the saturation region, $g_m$ is proportional to the aspect ratio ($W/L$):\n$$g_m \\propto \\frac{W}{L}$$\n\n*   **The Change:** You are doubling the width ($W \\rightarrow 2W$) and doubling the length ($L \\rightarrow 2L$).\n*   **The Result:** The new aspect ratio is $\\frac{2W}{2L} = \\frac{W}{L}$.\n*   **Conclusion:** Because the ratio remains unchanged, **$g_m$ stays the same** (assuming the bias current or overdrive voltage is kept constant).\n\n### 3. Effect on Output Resistance ($r_o$)\nOutput resistance is determined by channel length modulation. Physically, a longer channel makes the current less sensitive to changes in the drain-source voltage. The output resistance is directly proportional to the channel length ($L$):\n$$r_o \\propto L$$\n\n*   **The Change:** The length is doubled ($L \\rightarrow 2L$).\n*   **The Result:** **$r_o$ doubles.**\n\n### 4. Combined Effect on Gain\nNow we combine the two effects into the gain equation:\n$$A_{v0(new)} = g_m(new) \\cdot r_o(new)$$\n$$A_{v0(new)} = g_m(old) \\cdot (2 \\cdot r_o(old))$$\n$$A_{v0(new)} = 2 \\cdot (g_m \\cdot r_o)$$\n\n**Therefore, the intrinsic gain doubles.**\n\n### Summary\n*   **Doubling Width ($W$):** Increases current drive capability but is canceled out by the increase in length regarding transconductance.\n*   **Doubling Length ($L$):** Increases output resistance significantly.\n*   **Net Result:** The improvement in output resistance is not offset by a change in transconductance, leading to a **2x increase in gain**.\n\n*(Note: In modern short-channel technologies, the relationship is not perfectly linear due to velocity saturation and other effects, but increasing the channel length remains the primary method for increasing intrinsic gain.)*",
        "format": "markdown",
        "sha256": "0dadc7240a58880d45f70cda8c71574a1fc27e19b233c51e363037c28003ca49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: with unchanged W/L and the stated bias assumptions, gm stays roughly constant while ro approximately doubles as channel length increases. The short-channel caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 7613,
        "total_tokens": 7643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 7613,
        "total_tokens": 7643,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nIn a MOSFET operating in the saturation region (the standard mode for amplification), the transconductance ($g_m$) increases as the overdrive voltage ($V_{OV}$) increases.\n\n### 1. The Mathematical Proof\nFor an ideal MOSFET in saturation, the drain current ($I_D$) is determined by the square-law equation:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nWhere $V_{OV} = V_{GS} - V_{th}$ is the overdrive voltage. Transconductance is defined as the rate of change of drain current with respect to the gate-source voltage:\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}} = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\n\nSubstituting $V_{OV}$ into the equation gives:\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\nThis shows that $g_m$ is **directly proportional** to $V_{OV}$. As $V_{OV}$ increases, $g_m$ increases linearly.\n\n### 2. Physical Intuition\nThink of the channel as a pipe carrying water (current). \n*   **$V_{OV}$** determines how wide the pipe is (the number of charge carriers).\n*   **$g_m$** measures how sensitive the flow is to changes in the valve opening ($V_{GS}$).\n\nWhen you increase the overdrive voltage, you create a stronger electric field, which induces more charge carriers in the channel. This makes the channel more conductive, meaning a small change in the gate voltage will result in a larger change in the drain current.\n\n### 3. Why Student B Might Be Confused\nStudent B is likely confusing **transconductance ($g_m$)** with **transconductance efficiency ($g_m/I_D$)**. \n\nWhile $g_m$ itself goes up, the efficiency of generating that transconductance relative to the power consumed actually goes down. The relationship is:\n$$\\frac{g_m}{I_D} = \\frac{2}{V_{OV}}$$\nAs $V_{OV}$ increases, this ratio decreases. However, since the question specifically asks about $g_m$ (not the ratio), Student A is the correct answer.",
        "format": "markdown",
        "sha256": "acced85248444dab7f6f394f4bb1bd2153310ed5fbea802fb6643fd9cfa6ffd2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed MOSFET and derives that gm is proportional to VOV. The optional gm/ID discussion is also valid and does not undermine the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 42,
        "output_tokens": 5902,
        "total_tokens": 5944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 42,
        "output_tokens": 5902,
        "total_tokens": 5944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nHere is the detailed explanation of why Student A is right and why Student B might be confused.\n\n### 1. The Mathematical Proof (Saturation Region)\nIn the standard operation of a MOSFET (specifically in the saturation region), the drain current ($I_D$) is related to the overdrive voltage ($V_{OV} = V_{GS} - V_{th}$) by the square-law equation:\n\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2 = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2$$\n\nTransconductance ($g_m$) is defined as the change in drain current with respect to the gate-source voltage:\n\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nDifferentiating the current equation with respect to $V_{GS}$ (noting that $\\frac{\\partial V_{OV}}{\\partial V_{GS}} = 1$):\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\n**Conclusion:** According to this fundamental equation, $g_m$ is **directly proportional** to the overdrive voltage ($V_{OV}$). Therefore, as $V_{OV}$ increases, $g_m$ increases.\n\n### 2. Physical Intuition\nTransconductance represents how \"responsive\" the transistor is to changes in the input voltage.\n*   At low overdrive voltages (near the threshold), the channel is barely formed, and the current is low. The curve of $I_D$ vs. $V_{GS}$ is shallow, meaning a small change in voltage results in a small change in current (low $g_m$).\n*   As the overdrive voltage increases, the channel becomes stronger (more carriers), and the current increases quadratically. The slope of the $I_D$ vs. $V_{GS}$ curve becomes steeper, resulting in a higher $g_m$.\n\n### 3. Why Student B might be wrong (The Confusion)\nStudent B is likely confusing **Transconductance** ($g_m$) with **Transconductance Efficiency** ($g_m/I_D$).\n\nIn analog circuit design, engineers often care about how much transconductance they get per unit of current consumed. This ratio is called transconductance efficiency:\n\n$$\\frac{g_m}{I_D} = \\frac{\\mu_n C_{ox} \\frac{W}{L} V_{OV}}{\\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} V_{OV}^2} = \\frac{2}{V_{OV}}$$\n\nLooking at this efficiency equation, you can see that **$g_m/I_D$ decreases** as $V_{OV}$ increases.\n*   **Student A** is talking about the absolute value of $g_m$ (measured in Siemens/Amps per Volt).\n*   **Student B** is likely thinking about the efficiency ($g_m/I_D$), which drops as you drive the transistor harder (higher $V_{OV}$).\n\n### Summary\n*   **Absolute Transconductance ($g_m$):** Goes **UP** as $V_{OV}$ increases. (Student A is correct).\n*   **Transconductance Efficiency ($g_m/I_D$):** Goes **DOWN** as $V_{OV}$ increases. (This is likely what Student B had in mind).\n\n*(Note: In very short-channel modern technologies, velocity saturation may cause $g_m$ to stop increasing and become constant, but it generally does not decrease.)*",
        "format": "markdown",
        "sha256": "f2bdfd05f765258edd46c8fa221fe1aab2f3b3dae0434d13e369baaf14e9026a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right and derives that, for fixed W/L in saturation, gm is proportional to VOV. The efficiency discussion is secondary and does not detract from the central answer.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 42,
        "output_tokens": 10425,
        "total_tokens": 10467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 42,
        "output_tokens": 10425,
        "total_tokens": 10467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Student A is correct.**\n\nIn the standard operation of a MOSFET (specifically in the **saturation** or active region), the transconductance ($g_m$) increases as the overdrive voltage ($V_{OV}$) increases.\n\nHere is the mathematical and physical explanation for why this is the case.\n\n### 1. The Mathematical Derivation\nTo understand the relationship, we look at the equation for the drain current ($I_D$) of a MOSFET in saturation:\n\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nWhere:\n*   $V_{GS}$ is the Gate-to-Source voltage.\n*   $V_{th}$ is the Threshold voltage.\n*   The term $(V_{GS} - V_{th})$ is the **Overdrive Voltage** ($V_{OV}$).\n\nTransconductance ($g_m$) is defined as the rate of change of the drain current with respect to the gate voltage:\n\n$$g_m = \\frac{\\partial I_D}{\\partial V_{GS}}$$\n\nTaking the derivative of the current equation with respect to $V_{GS}$:\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})$$\n\nSubstituting $V_{OV}$ back into the equation:\n\n$$g_m = \\mu_n C_{ox} \\frac{W}{L} V_{OV}$$\n\n**Conclusion:** The equation shows that $g_m$ is **directly proportional** to $V_{OV}$. Therefore, as $V_{OV}$ increases, $g_m$ increases linearly.\n\n### 2. Physical Intuition\nTransconductance represents how effectively the gate voltage controls the current flowing through the channel.\n*   **Low Overdrive:** The channel is weakly inverted (few charge carriers). A small change in gate voltage results in a relatively small change in current.\n*   **High Overdrive:** The channel is strongly inverted (many charge carriers). The channel is more conductive, and the gate has a stronger influence on the flow of these carriers, resulting in a higher transconductance.\n\n### 3. Important Nuance (Short-Channel Effects)\nWhile Student A is correct regarding the standard \"square-law\" model used in textbooks, there is a caveat in modern, short-channel transistors (like those in modern CPUs).\n\nDue to **velocity saturation**, the carrier velocity hits a maximum limit. In this regime, the current ($I_D$) becomes roughly linear with $V_{OV}$ rather than quadratic. Consequently, $g_m$ tends to become **constant** (flat) rather than continuing to rise indefinitely. However, it still does not go *down*.\n\n### Why might Student B be confused?\nStudent B might be confusing transconductance ($g_m$) with **transconductance efficiency** ($g_m/I_D$).\n*   While $g_m$ goes up as $V_{OV}$ increases, the ratio $g_m/I_D$ (which measures how much gain you get per unit of power/current) actually **decreases** as $V_{OV}$ increases.\n\n**Verdict:** Student A is correct.",
        "format": "markdown",
        "sha256": "46e9a54f399a2c9c9794d06424f369d5daa148ae075645a066588089f20d5faf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A and derives that, for fixed device geometry in the square-law saturation model, gm is proportional to VOV. Discussing Student B’s fixed-current condition is optional.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 42,
        "output_tokens": 4191,
        "total_tokens": 4233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 42,
        "output_tokens": 4191,
        "total_tokens": 4233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3480,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is **no**, the small-signal models are not strictly identical, although they are **topologically very similar**.\n\nWhile both devices use the same fundamental components (transconductance $g_m$, output resistance $r_o$, and parasitic capacitances), there are critical differences regarding **current direction**, **voltage polarity**, and **parameter magnitudes**.\n\nHere is a detailed breakdown of the differences:\n\n### 1. Current Direction (Topology)\nThe most visible difference in the circuit diagram is the direction of the dependent current source.\n*   **NMOS:** The controlled current source points from **Drain to Source** (downwards). An increase in $V_{GS}$ increases the current flowing into the drain.\n*   **PMOS:** The controlled current source points from **Source to Drain** (upwards). An increase in $V_{SG}$ (or decrease in $V_{GS}$) increases the current flowing out of the source.\n\n### 2. Voltage Polarity and Control Variables\nBecause PMOS and NMOS operate on opposite voltage polarities, the control variables in the equations differ slightly to maintain positive values for calculations.\n*   **NMOS:** Controlled by $v_{gs}$ (Gate-to-Source).\n    $$i_d = g_m v_{gs}$$\n*   **PMOS:** Usually controlled by $v_{sg}$ (Source-to-Gate) to keep the variable positive, or strictly by $v_{gs}$ with a negative sign.\n    $$i_s = g_m v_{sg}$$\n    *(Note: If using $v_{gs}$ for PMOS, the current equation becomes $i_d = -g_m v_{gs}$ because increasing $V_{GS}$ turns the device OFF).*\n\n### 3. Parameter Magnitudes (Physics)\nEven if the circuit topology were flipped to look identical, the numerical values of the parameters differ due to semiconductor physics.\n*   **Mobility:** Electron mobility ($\\mu_n$) is typically 2–3 times higher than hole mobility ($\\mu_p$). Therefore, for the same physical dimensions ($W/L$) and bias current, an NMOS will generally have a higher $g_m$ than a PMOS.\n*   **Threshold Voltage:** The threshold voltages ($V_{th}$) have opposite signs ($+V_{tn}$ vs $-V_{tp}$), affecting the DC biasing required to establish the small-signal operating point.\n\n### Summary Table\n\n| Feature | NMOS Small-Signal Model | PMOS Small-Signal Model |\n| :--- | :--- | :--- |\n| **Current Source Direction** | Drain $\\to$ Source | Source $\\to$ Drain |\n| **Control Voltage** | $v_{gs}$ | $v_{sg}$ (or $-v_{gs}$) |\n| **Carrier Type** | Electrons | Holes |\n| **Mobility ($\\mu$)** | Higher ($\\mu_n$) | Lower ($\\mu_p$) |\n| **Equation Form** | $i_d = g_m v_{gs}$ | $i_s = g_m v_{sg}$ |\n\n### Conclusion\nIn circuit analysis, engineers often treat them as \"duals\" of each other. You can analyze a PMOS circuit by flipping the schematic upside down and treating it like an NMOS, provided you account for the reversed current arrows and voltage polarities. However, strictly speaking, the models are distinct due to these directional and physical constraints.",
        "format": "markdown",
        "sha256": "597178feaa72b269bb8b04fa946fd021f800cae36fcd16d8eebe6f1a503f0269"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the analogous model elements and polarity/sign differences, but concludes the models are distinct. With consistent polarities, the PMOS small-signal model has the same form as the NMOS model.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2117,
        "total_tokens": 2147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2117,
        "total_tokens": 2147,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1371,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "No, the small-signal model of a PMOS device is **not strictly identical** to that of an NMOS device. While they share the same topological structure (the arrangement of components), they differ in **current direction** and **voltage polarity conventions**.\n\n### 1. Topological Similarity\nBoth devices use the same fundamental components in their small-signal equivalent circuits:\n*   **Transconductance ($g_m$):** Represents the control of the drain current by the gate voltage.\n*   **Output Resistance ($r_o$):** Accounts for channel-length modulation.\n*   **Capacitances ($C_{gs}, C_{gd}, C_{gb}$):** Represent the physical charge storage in the gate oxide and depletion regions.\n\n### 2. Key Differences\n\n#### A. Direction of the Dependent Current Source\nThe primary visual difference is the direction of the voltage-controlled current source ($g_m v_{gs}$):\n*   **NMOS:** The current source points from **Drain to Source** (conventional current flow).\n*   **PMOS:** The current source points from **Source to Drain**.\n\n#### B. Voltage Polarity and Sign Conventions\nBecause PMOS devices operate with holes (positive charge carriers) and typically require negative gate-to-source voltages ($V_{GS} < 0$), engineers often redefine variables to maintain positive values:\n*   **NMOS:** Uses $v_{gs}$ (Gate-to-Source). An increase in $v_{gs}$ increases the drain current.\n*   **PMOS:** Often uses $v_{sg}$ (Source-to-Gate). An increase in $v_{sg}$ increases the drain current. \n*   **Mathematical Sign:** If you strictly use $v_{gs}$ for a PMOS, the transconductance term becomes negative ($i_d = -g_m v_{gs}$) because increasing $v_{gs}$ (making it less negative) actually decreases the current.\n\n### 3. Summary Comparison\n\n| Feature | NMOS Model | PMOS Model |\n| :--- | :--- | :--- |\n| **Current Source Direction** | Drain $\\rightarrow$ Source | Source $\\rightarrow$ Drain |\n| **Control Variable** | $v_{gs}$ | $v_{sg}$ (preferred) or $v_{gs}$ |\n| **Transconductance ($g_m$)** | Positive value | Positive value (when using $v_{sg}$) |\n| **Output Resistance ($r_o$)** | Same formula | Same formula |\n| **Capacitances** | Same structure | Same structure |\n\n### Conclusion\nFor AC analysis, the models are functionally equivalent if you account for the **reversed current direction** and the **sign of the input voltage**. In integrated circuit design, this symmetry allows designers to use complementary pairs (CMOS) where the PMOS model is essentially a \"mirror image\" of the NMOS model.",
        "format": "markdown",
        "sha256": "b5638b7c3ef4a535bbb814bcc36efa33c25b7ed3cc66a1c285e8169b36a17f77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the same small-signal topology and explains that apparent differences are due to current and voltage polarity conventions, matching the golden solution’s same-form conclusion.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2588,
        "total_tokens": 2618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2588,
        "total_tokens": 2618,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The short answer is: **Topologically, yes; Mathematically, no.**\n\nWhile the circuit diagram (topology) for the small-signal model of a PMOS device is virtually identical to that of an NMOS device, there are critical differences in **sign conventions** and **parameter magnitudes** that must be accounted for during analysis.\n\n### 1. Topological Identity (The Diagram)\nIf you draw the small-signal equivalent circuit (hybrid-$\\pi$ model) for both devices, they look the same. Both consist of:\n*   **Gate (G):** Open circuit (infinite impedance) at low frequencies.\n*   **Source (S) & Drain (D):** Connected by a voltage-controlled current source.\n*   **Output Resistance ($r_o$):** Placed in parallel with the current source.\n*   **Capacitances:** $C_{gs}$, $C_{gd}$, $C_{db}$, and $C_{sb}$ connect the respective terminals.\n*   **Body Effect:** A dependent current source controlled by the source-bulk voltage ($g_{mb}v_{sb}$).\n\n### 2. Mathematical Differences (Sign Conventions)\nThe primary difference lies in how voltages and currents are defined relative to the device operation.\n\n*   **NMOS:** Current flows from Drain to Source. An increase in $V_{GS}$ increases current.\n    *   Equation: $i_d = g_m v_{gs}$\n*   **PMOS:** Current flows from Source to Drain. An increase in $V_{SG}$ increases current.\n    *   If you use $v_{gs}$ (Gate-to-Source), the equation becomes: $i_d = -g_m v_{gs}$\n    *   **Best Practice:** To avoid negative signs, it is standard convention to define the controlling voltage as $v_{sg}$ (Source-to-Gate).\n    *   Equation: $i_s = g_m v_{sg}$ (where $i_s$ is current leaving the source).\n\n### 3. Parameter Magnitudes (Physics)\nEven if the equations are adjusted for signs, the numerical values of the parameters differ due to semiconductor physics.\n\n*   **Transconductance ($g_m$):**\n    $$g_m = \\sqrt{2 \\mu C_{ox} \\frac{W}{L} I_D}$$\n    Because hole mobility ($\\mu_p$) is significantly lower than electron mobility ($\\mu_n$)—typically $\\mu_p \\approx \\frac{1}{2}\\mu_n$—a PMOS transistor will have a lower $g_m$ than an NMOS of the same dimensions and current.\n*   **Threshold Voltage ($V_{th}$):**\n    While not part of the AC model itself, the DC bias point determines the AC parameters. PMOS devices typically have a negative threshold voltage ($V_{th} < 0$), whereas NMOS have a positive one.\n\n### Summary Comparison\n\n| Feature | NMOS Small-Signal Model | PMOS Small-Signal Model |\n| :--- | :--- | :--- |\n| **Circuit Topology** | Identical | Identical |\n| **Current Direction** | Drain to Source | Source to Drain |\n| **Control Voltage** | $v_{gs}$ | $v_{sg}$ (Recommended) |\n| **Current Equation** | $i_d = g_m v_{gs}$ | $i_s = g_m v_{sg}$ |\n| **Carrier Type** | Electrons | Holes |\n| **Mobility ($\\mu$)** | High ($\\mu_n$) | Low ($\\mu_p$) |\n| **Resulting $g_m$** | Higher | Lower (for same geometry) |\n\n**Conclusion:** You can use the exact same circuit diagram for both, but you must ensure you are using the correct voltage polarity ($v_{sg}$ vs $v_{gs}$) and account for the lower transconductance inherent to PMOS technology.",
        "format": "markdown",
        "sha256": "2d0e98dc4a6ecdf0f8421b1338a02d9468556cb9c1416a50cd81f7c25deb172b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly says the PMOS model has the same topology and explains that signs depend on voltage/current conventions. Different parameter values do not change the model's form, so this meets the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2760,
        "total_tokens": 2790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 30,
        "output_tokens": 2760,
        "total_tokens": 2790,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic, we need to analyze the circuit and determine the relationship between the current $I_X$ and the voltage $V_X$.\n\n**1. Circuit Analysis**\n*   **Transistor $M_1$:** The symbol represents an NMOS transistor. The gate (left plate) is connected to the drain (top terminal of the channel). This configuration is known as a **diode-connected transistor**. The source (bottom terminal with the arrow) is connected to ground.\n*   **Voltage Source $V_X$:** The positive terminal is connected to the drain/gate node, and the negative terminal is grounded. Therefore, the voltage at the drain and gate is $V_X$.\n*   **Node Voltages:**\n    *   $V_S = 0$ V (Ground)\n    *   $V_G = V_X$\n    *   $V_D = V_X$\n*   **Transistor Voltages:**\n    *   $V_{GS} = V_G - V_S = V_X - 0 = V_X$\n    *   $V_{DS} = V_D - V_S = V_X - 0 = V_X$\n\n**2. Transistor Operating Region**\nFor an NMOS transistor to be in the **saturation region**, the condition is $V_{DS} \\ge V_{GS} - V_{TH}$ (where $V_{TH}$ is the threshold voltage).\nSubstituting our values:\n$$V_X \\ge V_X - V_{TH} \\implies V_{TH} \\ge 0$$\nThis condition is always true for a standard enhancement-mode NMOS transistor. Therefore, as long as the transistor is turned on ($V_{GS} > V_{TH}$), it operates in the **saturation region**.\n\nIf $V_X < V_{TH}$, the transistor is in **cutoff**.\n\n**3. Current Relationship**\nThe current $I_X$ flows from the voltage source $V_X$ into the node connecting the gate and drain.\n*   Gate current $I_G = 0$ (ideal MOSFET).\n*   Therefore, all current $I_X$ flows into the drain of the transistor. So, $I_X = I_D$ (drain current).\n\n**Case 1: Cutoff Region ($V_X < V_{TH}$)**\nThe transistor is off.\n$$I_X = 0$$\n\n**Case 2: Saturation Region ($V_X \\ge V_{TH}$)**\nThe drain current for an NMOS in saturation (ignoring channel length modulation for simplicity, or including it as a factor) is given by:\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{GS} - V_{TH})^2 (1 + \\lambda V_{DS})$$\n\nSubstituting $V_{GS} = V_X$ and $V_{DS} = V_X$:\n$$I_X = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_X - V_{TH})^2 (1 + \\lambda V_X)$$\n\nIf we assume channel length modulation is negligible ($\\lambda \\approx 0$), the equation simplifies to a quadratic relationship:\n$$I_X = K (V_X - V_{TH})^2$$\nwhere $K = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L}$ is a constant.\n\n**4. Sketch of $I_X$ versus $V_X$**\n\nBased on the analysis:\n*   For $V_X < V_{TH}$, $I_X = 0$. The graph is a flat line along the horizontal axis.\n*   At $V_X = V_{TH}$, the current starts to flow.\n*   For $V_X > V_{TH}$, $I_X$ increases quadratically with $V_X$ (parabolic shape). The slope is zero at $V_X = V_{TH}$ and increases as $V_X$ increases.\n\n**Sketch:**\n\n```text\n      Ix\n      ^\n      |\n      |                      /  (Ix ∝ (Vx - Vth)²)\n      |                    /\n      |                  /\n      |                /\n      |              /\n      |            /\n      |          /\n      |        /\n      |      /\n      |    /\n      |  /\n      |/  (slope is 0 at Vth)\n------+--------------------------> Vx\n      |   Vth\n      |\n```\n\n**Description of the graph:**\n1.  Draw horizontal axis $V_X$ and vertical axis $I_X$.\n2.  Mark a point $V_{TH}$ (threshold voltage) on the positive $V_X$ axis.\n3.  Draw a horizontal line along the $V_X$ axis from negative infinity up to $V_{TH}$ (representing $I_X = 0$).\n4.  Starting from $V_{TH}$, draw a curve that rises to the right. The curve should be tangent to the x-axis at $V_{TH}$ (slope = 0) and curve upwards, getting steeper as $V_X$ increases (parabolic shape $y = x^2$). This represents the region where the diode-connected MOSFET is conducting.",
        "format": "markdown",
        "sha256": "17eb5d4a3424e87c19644548ca059e8f5ad4051d03de35e42553a8875c89bc64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current up to threshold followed by a quadratic rise above threshold. The negative-voltage caveat is secondary and does not affect the essential answer.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 6906,
        "total_tokens": 7853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 6906,
        "total_tokens": 7853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5722,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the step-by-step analysis to determine the relationship between $I_X$ and $V_X$ and sketch the characteristic curve.\n\n### 1. Circuit Analysis\n*   **Transistor $M_1$:** The symbol represents an NMOS transistor.\n    *   The **Source** is connected to ground ($V_S = 0$ V).\n    *   The **Gate** is connected to the **Drain**. This configuration is known as a **diode-connected transistor**.\n    *   Therefore, the Gate-to-Source voltage ($V_{GS}$) is equal to the Drain-to-Source voltage ($V_{DS}$). Let's call the voltage at the top node $V_D$. Since the voltage source $V_X$ is connected between this node and ground, $V_D = V_X$.\n    *   So, $V_{GS} = V_X - 0 = V_X$ and $V_{DS} = V_X - 0 = V_X$.\n\n*   **Current $I_X$:** The arrow indicates that current $I_X$ flows from the voltage source $V_X$ into the drain of the transistor. Since the gate current is zero ($I_G = 0$), all of $I_X$ flows into the drain. Thus, $I_X = I_D$ (the drain current).\n\n### 2. Transistor Operating Regions\nFor an NMOS transistor with threshold voltage $V_{th}$ (or $V_{TN}$):\n\n*   **Cutoff Region:** If $V_{GS} < V_{th}$ (i.e., $V_X < V_{th}$), the transistor is off.\n    *   $I_D = 0 \\Rightarrow \\mathbf{I_X = 0}$.\n\n*   **Saturation Region:** For a diode-connected NMOS, $V_{DS} = V_{GS}$. The condition for saturation is $V_{DS} \\ge V_{GS} - V_{th}$.\n    *   Substituting the values: $V_X \\ge V_X - V_{th} \\Rightarrow V_{th} \\ge 0$.\n    *   Since $V_{th}$ is positive for an enhancement NMOS, this condition is always satisfied when the transistor is on. Therefore, for $V_X \\ge V_{th}$, the transistor operates in the **saturation region**.\n\n### 3. Current-Voltage Relationship\nIn the saturation region, the drain current is given by the square-law equation (ignoring channel-length modulation for simplicity):\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n\nLet $k_n = \\mu_n C_{ox} \\frac{W}{L}$. Then:\n$$I_X = I_D = \\frac{1}{2} k_n (V_X - V_{th})^2 \\quad \\text{for } V_X \\ge V_{th}$$\n\nIf we include channel-length modulation ($\\lambda$), the equation is:\n$$I_X = \\frac{1}{2} k_n (V_X - V_{th})^2 (1 + \\lambda V_X)$$\nThis still results in a similar shape, just slightly steeper. For a basic sketch, the square-law relationship is sufficient.\n\n### 4. Sketch of $I_X$ versus $V_X$\n\nThe graph plots $I_X$ on the y-axis and $V_X$ on the x-axis.\n\n1.  **For $0 \\le V_X < V_{th}$:** The current $I_X$ is **0**. The graph is a flat line along the horizontal axis.\n2.  **For $V_X \\ge V_{th}$:** The current $I_X$ increases according to a **parabolic (square-law)** function. The curve starts at $(V_{th}, 0)$ with a slope of zero and curves upwards, getting steeper as $V_X$ increases.\n\n**Sketch Description:**\n*   Draw horizontal axis $V_X$ and vertical axis $I_X$.\n*   Mark a point $V_{th}$ (threshold voltage) on the $V_X$ axis.\n*   Draw a line along the $V_X$ axis from $0$ to $V_{th}$ (where $I_X = 0$).\n*   From $V_{th}$ onwards, draw a curve that looks like the right half of a parabola ($y = x^2$), starting flat and curving up.\n\n**Visual Representation:**\n\n```text\n      Ix\n      |\n      |              /  (Parabolic increase: Ix ∝ (Vx - Vth)²)\n      |            /\n      |          /\n      |        /\n      |      /\n      |    /\n      |  /\n      |/  (Slope is 0 at Vx = Vth)\n------|----------------------- Vx\n      Vth\n```\n\n**Mathematical Summary:**\n$$\nI_X = \\begin{cases} \n0 & \\text{if } V_X < V_{th} \\\\\n\\frac{1}{2} k_n (V_X - V_{th})^2 & \\text{if } V_X \\ge V_{th} \n\\end{cases}\n$$",
        "format": "markdown",
        "sha256": "753c4bb795781e80b0a32384e3cccb2a6d7b5088a660fde8b04109ac840cb80d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current below threshold and a quadratic rise above threshold. The saturation reasoning and optional channel-length modulation note are consistent with the result.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 6483,
        "total_tokens": 7430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 6483,
        "total_tokens": 7430,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5315,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the step-by-step analysis to determine the relationship between $I_X$ and $V_X$ and to sketch the graph.\n\n### 1. Circuit Analysis\n*   **Transistor Type:** The component $M_1$ is an NMOS transistor. We can identify this by the arrow on the source terminal pointing outwards (or the standard symbol convention where the gate is isolated and the channel is between drain and source).\n*   **Configuration:** The Gate (G) is connected to the Drain (D). This is known as a **diode-connected MOSFET**.\n*   **Connections:**\n    *   The Source (S) is connected to ground, so $V_S = 0$ V.\n    *   The voltage source $V_X$ is connected between the Drain/Gate node and ground. The positive terminal is at the top. Therefore, the voltage at the Drain and Gate is $V_X$.\n    *   So, $V_D = V_X$ and $V_G = V_X$.\n\n### 2. Voltages and Operating Region\nFrom the connections, we can determine the terminal voltages relative to the source:\n*   $V_{GS} = V_G - V_S = V_X - 0 = V_X$\n*   $V_{DS} = V_D - V_S = V_X - 0 = V_X$\n\nSince $V_{DS} = V_{GS}$, the condition for saturation ($V_{DS} \\ge V_{GS} - V_{th}$) becomes:\n$$V_X \\ge V_X - V_{th} \\implies V_{th} \\ge 0$$\nThis is true for a standard enhancement-mode NMOS transistor (where threshold voltage $V_{th} > 0$). Therefore, whenever the transistor is turned on ($V_{GS} > V_{th}$), it operates in the **saturation region**.\n\n*   **Cutoff Region:** If $V_X < V_{th}$, the transistor is off ($V_{GS} < V_{th}$).\n*   **Saturation Region:** If $V_X \\ge V_{th}$, the transistor is on and in saturation.\n\n### 3. Current Equation ($I_X$ vs $V_X$)\nThe current $I_X$ flows from the voltage source $V_X$ into the drain node. Since the gate current is zero, all of $I_X$ flows into the drain of the transistor ($I_X = I_D$).\n\n*   **For $V_X < V_{th}$ (Cutoff):**\n    The transistor is off, so no current flows.\n    $$I_X = 0$$\n\n*   **For $V_X \\ge V_{th}$ (Saturation):**\n    The drain current in saturation is given by the square-law equation (assuming channel length modulation $\\lambda \\approx 0$ for simplicity):\n    $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_{GS} - V_{th})^2$$\n    Substituting $V_{GS} = V_X$ and $I_X = I_D$:\n    $$I_X = \\frac{1}{2} k_n' \\left(\\frac{W}{L}\\right) (V_X - V_{th})^2$$\n    Let $K = \\frac{1}{2} k_n' (W/L)$. Then, $I_X = K(V_X - V_{th})^2$.\n\n### 4. Sketch of $I_X$ versus $V_X$\n\nThe graph will have $V_X$ on the horizontal axis and $I_X$ on the vertical axis.\n\n1.  **From $V_X = 0$ to $V_X = V_{th}$:** The current $I_X$ is **0**. The graph is a flat line along the horizontal axis.\n2.  **At $V_X = V_{th}$:** The current starts to flow. The curve is tangent to the horizontal axis (slope is zero) because the derivative of $(V_X - V_{th})^2$ is zero at $V_X = V_{th}$.\n3.  **For $V_X > V_{th}$:** The current increases quadratically (parabolic shape). As $V_X$ increases, $I_X$ grows rapidly.\n\n**Sketch:**\n\n```text\n      I_X\n       |\n       |                  /  (Parabolic curve: I_X ∝ (V_X - V_th)²)\n       |                /\n       |              /\n       |            /\n       |          /\n       |        /\n       |      /\n       |    /\n       |  /\n       |/\n_______|________________________ V_X\n       V_th\n```\n\n**Description of the sketch:**\n*   The curve lies on the horizontal axis ($I_X=0$) for $V_X < V_{th}$.\n*   At $V_X = V_{th}$, the curve begins to rise.\n*   For $V_X > V_{th}$, the curve is a parabola opening upwards, representing the square-law relationship of the MOSFET in saturation.",
        "format": "markdown",
        "sha256": "afe13dfccaf4e7f7b0d568107207a127a1c527650e4ccab49f1d6fae21090778"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, places it in saturation when on, and gives approximately zero current below threshold followed by a quadratic rise above threshold, matching the required result.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 6574,
        "total_tokens": 7521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5439,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 6574,
        "total_tokens": 7521,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5439,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic, we first analyze the circuit and the operating regions of the transistor $M_1$.\n\n**1. Circuit Analysis:**\n*   **Transistor Type:** The symbol shows an NMOS transistor (arrow on the source terminal pointing away from the channel, or typically the arrow is on the body pointing in; here, the bottom terminal is grounded and the arrow points out/right, indicating the source is at the bottom). Let's assume standard NMOS configuration:\n    *   **Gate (G):** Connected to voltage source $V_X$. So, $V_G = V_X$.\n    *   **Source (S):** Connected to ground. So, $V_S = 0$ V.\n    *   **Drain (D):** Connected to the positive terminal of the 1 V DC source. So, $V_D = 1$ V.\n*   **Voltages:**\n    *   Gate-Source voltage: $V_{GS} = V_G - V_S = V_X - 0 = V_X$.\n    *   Drain-Source voltage: $V_{DS} = V_D - V_S = 1 - 0 = 1$ V.\n*   **Current:** The current $I_X$ flows from the 1 V source into the drain of the transistor. For an NMOS transistor, conventional current flows from Drain to Source. Thus, $I_X$ is equal to the drain current $I_D$.\n\n**2. Operating Regions:**\nThe operation of the NMOS transistor depends on $V_{GS}$ ($V_X$) and $V_{DS}$ (fixed at 1 V). Let $V_{th}$ be the threshold voltage of the transistor.\n\n*   **Region 1: Cutoff**\n    *   Condition: $V_{GS} < V_{th} \\Rightarrow V_X < V_{th}$.\n    *   The transistor is off.\n    *   $I_X = I_D = 0$.\n\n*   **Region 2: Saturation**\n    *   Condition: $V_{GS} > V_{th}$ and $V_{DS} \\ge V_{GS} - V_{th}$.\n    *   Substituting values: $V_X > V_{th}$ and $1 \\ge V_X - V_{th} \\Rightarrow V_X \\le V_{th} + 1$.\n    *   Range: $V_{th} < V_X \\le V_{th} + 1$.\n    *   Current equation (ignoring channel length modulation):\n        $$I_X = I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n        Let $k = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L}$. Then, **$I_X = k (V_X - V_{th})^2$**.\n    *   This is a parabolic curve.\n\n*   **Region 3: Triode (Linear) Region**\n    *   Condition: $V_{GS} > V_{th}$ and $V_{DS} < V_{GS} - V_{th}$.\n    *   Substituting values: $V_X > V_{th}$ and $1 < V_X - V_{th} \\Rightarrow V_X > V_{th} + 1$.\n    *   Range: $V_X > V_{th} + 1$.\n    *   Current equation:\n        $$I_X = I_D = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{GS} - V_{th})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n        Using $2k = \\mu_n C_{ox} \\frac{W}{L}$ and $V_{DS} = 1$:\n        $$I_X = 2k \\left[ (V_X - V_{th})(1) - \\frac{1}{2}(1)^2 \\right] = 2k (V_X - V_{th} - 0.5)$$\n        Wait, let's keep the coefficient consistent. If $I_{sat} = k(V_{GS}-V_{th})^2$, then the triode equation is $I_D = 2k [ (V_{GS}-V_{th})V_{DS} - V_{DS}^2/2 ]$.\n        So, **$I_X = 2k (V_X - V_{th} - 0.5)$**.\n    *   This is a linear equation with a positive slope.\n\n**3. Sketch Description:**\nThe graph of $I_X$ versus $V_X$ has the following characteristics:\n\n1.  **For $V_X < V_{th}$:** The current $I_X$ is **0**. The graph is a flat line along the horizontal axis.\n2.  **For $V_{th} < V_X < V_{th} + 1$ V:** The transistor is in saturation. $I_X$ follows a **parabolic curve** ($I_X \\propto (V_X - V_{th})^2$) starting from 0 and increasing.\n3.  **For $V_X > V_{th} + 1$ V:** The transistor enters the triode region. $I_X$ follows a **straight line** with a constant positive slope ($I_X \\propto V_X$).\n4.  **Transition Point:** At $V_X = V_{th} + 1$ V, the curve transitions from parabolic to linear. The value is continuous and the slope is continuous (smooth transition).\n    *   At $V_X = V_{th} + 1$, $I_X = k(1)^2 = k$. (Using the saturation formula with coefficient $k$).\n    *   Using the triode formula $2k(1 - 0.5) = k$. The values match.\n\n**Sketch:**\n\n*   **X-axis:** $V_X$\n*   **Y-axis:** $I_X$\n*   Mark $V_{th}$ on the x-axis. The curve is 0 to the left of this.\n*   Mark $V_{th} + 1$ on the x-axis.\n*   From $V_{th}$ to $V_{th} + 1$, draw a curve that gets steeper (parabola).\n*   From $V_{th} + 1$ onwards, draw a straight line continuing from the end of the parabola.\n\n**Visual Representation:**\n\n```\n  I_X\n   |\n   |                  /  (Linear region, slope = constant)\n   |                /\n   |              /  <-- Transition at V_X = V_th + 1\n   |           _/\n   |        _/  (Saturation region, parabolic)\n   |     _/\n   |  _/\n   |_/___________________________ V_X\n   0  V_th      V_th + 1\n```\n\n**Detailed Equations for the sketch:**\n*   $V_X < V_{th} \\rightarrow I_X = 0$\n*   $V_{th} \\le V_X \\le V_{th} + 1 \\rightarrow I_X = \\frac{1}{2} k' \\frac{W}{L} (V_X - V_{th})^2$\n*   $V_X > V_{th} + 1 \\rightarrow I_X = k' \\frac{W}{L} (V_X - V_{th} - 0.5)$  (where $k' = \\mu_n C_{ox}$)",
        "format": "markdown",
        "sha256": "63a59b4c953c5aa9df23a2cf27e2cc894d923115baa8ae1d925fe1ab80fddc3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the quadratic saturation-region rise from VTH to VTH + 1 V and the roughly linear triode-region rise beyond it. The equations and transition are consistent with the stated circuit.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 9302,
        "total_tokens": 10406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 9302,
        "total_tokens": 10406,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7610,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic, we need to analyze the operation of the NMOS transistor $M_1$ under different values of the input voltage $V_X$.\n\n**1. Circuit Analysis:**\n*   **Transistor Type:** The symbol represents an NMOS transistor (arrow pointing out from the channel/source).\n*   **Gate Voltage ($V_G$):** Connected to $V_X$, so $V_G = V_X$.\n*   **Source Voltage ($V_S$):** Connected to ground, so $V_S = 0$ V.\n*   **Gate-Source Voltage ($V_{GS}$):** $V_{GS} = V_G - V_S = V_X$.\n*   **Drain Voltage ($V_D$):** Connected to the positive terminal of the 1 V DC source. The negative terminal is grounded. So, $V_D = 1$ V.\n*   **Drain-Source Voltage ($V_{DS}$):** $V_{DS} = V_D - V_S = 1$ V - 0 V = 1 V.\n*   **Current $I_X$:** The arrow indicates current flowing from the 1 V source into the drain of the transistor. This is the drain current $I_D$. So, $I_X = I_D$.\n\n**2. Transistor Operating Regions:**\nLet $V_{th}$ be the threshold voltage of the NMOS transistor. The current $I_X$ depends on the relationship between $V_{GS}$ ($V_X$) and $V_{DS}$ (1 V).\n\n*   **Cutoff Region:**\n    *   Condition: $V_{GS} < V_{th} \\Rightarrow V_X < V_{th}$.\n    *   The transistor is off.\n    *   $I_X = 0$.\n\n*   **Saturation Region:**\n    *   Condition: $V_{GS} > V_{th}$ and $V_{DS} \\ge V_{GS} - V_{th}$.\n    *   $V_X > V_{th}$ and $1 \\text{ V} \\ge V_X - V_{th} \\Rightarrow V_X \\le V_{th} + 1 \\text{ V}$.\n    *   So, for $V_{th} < V_X \\le V_{th} + 1$ V.\n    *   The drain current equation is: $I_X = \\frac{1}{2} k_n \\frac{W}{L} (V_{GS} - V_{th})^2 = K(V_X - V_{th})^2$, where $K$ is a constant.\n    *   This is a **parabolic curve** (quadratic increase).\n\n*   **Triode (Linear) Region:**\n    *   Condition: $V_{GS} > V_{th}$ and $V_{DS} < V_{GS} - V_{th}$.\n    *   $V_X > V_{th}$ and $1 \\text{ V} < V_X - V_{th} \\Rightarrow V_X > V_{th} + 1$ V.\n    *   So, for $V_X > V_{th} + 1$ V.\n    *   The drain current equation is: $I_X = k_n \\frac{W}{L} \\left[ (V_{GS} - V_{th})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$.\n    *   Substituting values ($V_{DS}=1$): $I_X = 2K \\left[ (V_X - V_{th})(1) - 0.5(1)^2 \\right] = 2K(V_X - V_{th} - 0.5) = K[2(V_X - V_{th}) - 1]$.\n    *   This is a **linear equation** with a constant positive slope ($2K$).\n\n**3. Sketch Description:**\nThe graph of $I_X$ versus $V_X$ will have the following features:\n*   **X-axis:** $V_X$. **Y-axis:** $I_X$.\n*   **From $V_X = 0$ to $V_X = V_{th}$:** The current $I_X$ is **0**. The graph lies on the horizontal axis.\n*   **From $V_X = V_{th}$ to $V_X = V_{th} + 1$:** The current $I_X$ increases **parabolically** (quadratically). The curve is concave up.\n*   **At $V_X = V_{th} + 1$:** The transistor transitions from saturation to the triode region. The current is $I_X = K(1)^2 = K$.\n*   **For $V_X > V_{th} + 1$:** The current $I_X$ increases **linearly** (straight line). The slope is constant. Note that the slope of the parabola at the transition point matches the slope of the line, making the curve smooth.\n\n**Sketch:**\n\n```\n  I_X\n   |\n   |                  /  (Linear region, slope = 2K)\n   |                /\n   |              /  <-- Transition at V_X = V_th + 1\n   |           _/\n   |        _/    (Saturation region, parabolic)\n   |     _/\n   |  _/\n   |_/___________________________ V_X\n   0  V_th      V_th + 1\n```\n\n**Detailed Plot:**\n1.  Mark $V_{th}$ on the x-axis. $I_X=0$ until this point.\n2.  Mark $V_{th} + 1$ on the x-axis.\n3.  Draw a curve starting at $(V_{th}, 0)$ that curves upwards like $y=x^2$ until $x = V_{th} + 1$.\n4.  From $x = V_{th} + 1$ onwards, draw a straight line extending upwards to the right.\n\nThe resulting graph looks like a zero line, followed by a parabola, which then smoothly transitions into a straight line with a constant slope.",
        "format": "markdown",
        "sha256": "b2d332099b360b2899aa2039f4c0d98adf96ddbbb9232f8ec32edd128e732323"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies zero current below threshold, a quadratic rise in saturation from Vth to Vth + 1 V, and a smooth transition to a roughly linear rise in triode beyond that point.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 6553,
        "total_tokens": 7657,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 6553,
        "total_tokens": 7657,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To sketch the $I_X$ versus $V_X$ characteristic, we first need to analyze the circuit and determine the operating region of the transistor $M_1$ for different values of $V_X$.\n\n**1. Circuit Analysis:**\n*   **Transistor Type:** The symbol for $M_1$ has an arrow pointing outwards from the channel, which indicates an **NMOS transistor**.\n*   **Terminal Voltages:**\n    *   **Gate ($G$):** Connected to $V_X$, so $V_G = V_X$.\n    *   **Source ($S$):** Connected to ground, so $V_S = 0$ V.\n    *   **Drain ($D$):** Connected to the positive terminal of a 1 V DC source (the negative terminal is grounded), so $V_D = 1$ V.\n*   **Key Voltages:**\n    *   Gate-Source Voltage: $V_{GS} = V_G - V_S = V_X - 0 = V_X$.\n    *   Drain-Source Voltage: $V_{DS} = V_D - V_S = 1 - 0 = 1$ V.\n*   **Current $I_X$:** The arrow for $I_X$ points from the 1 V source into the drain of the transistor. For an NMOS transistor, conventional current flows from Drain to Source. Thus, $I_X$ is equal to the drain current $I_D$.\n\n**2. Operating Regions:**\nLet $V_{th}$ (or $V_{TN}$) be the threshold voltage of the NMOS transistor. We analyze the current $I_X$ in three regions based on the value of $V_X$.\n\n*   **Region 1: Cutoff ($V_X < V_{th}$)**\n    *   Condition: $V_{GS} < V_{th}$.\n    *   The transistor is off.\n    *   **$I_X = 0$**.\n\n*   **Region 2: Saturation ($V_{th} \\le V_X \\le V_{th} + 1$ V)**\n    *   Condition: $V_{GS} > V_{th}$ and $V_{DS} \\ge V_{GS} - V_{th}$.\n    *   Substituting values: $V_X > V_{th}$ and $1 \\ge V_X - V_{th} \\Rightarrow V_X \\le V_{th} + 1$.\n    *   So, this region is **$V_{th} \\le V_X \\le V_{th} + 1$**.\n    *   The drain current equation for saturation (ignoring channel length modulation) is:\n        $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{GS} - V_{th})^2$$\n    *   Let $k = \\mu_n C_{ox} \\frac{W}{L}$. Then:\n        **$I_X = \\frac{k}{2} (V_X - V_{th})^2$**.\n    *   This is a **parabolic curve** increasing with $V_X$.\n\n*   **Region 3: Triode / Linear Region ($V_X > V_{th} + 1$ V)**\n    *   Condition: $V_{GS} > V_{th}$ and $V_{DS} < V_{GS} - V_{th}$.\n    *   Substituting values: $V_X > V_{th}$ and $1 < V_X - V_{th} \\Rightarrow V_X > V_{th} + 1$.\n    *   So, this region is **$V_X > V_{th} + 1$**.\n    *   The drain current equation for the triode region is:\n        $$I_D = \\mu_n C_{ox} \\frac{W}{L} \\left[ (V_{GS} - V_{th})V_{DS} - \\frac{1}{2}V_{DS}^2 \\right]$$\n    *   Substituting $V_{GS}=V_X$, $V_{DS}=1$, and $k = \\mu_n C_{ox} \\frac{W}{L}$:\n        $$I_X = k \\left[ (V_X - V_{th})(1) - \\frac{1}{2}(1)^2 \\right]$$\n        **$I_X = k (V_X - V_{th} - 0.5)$**.\n    *   This is a **linear equation** with a positive slope $k$.\n\n**3. Sketch Description:**\n\nThe graph of $I_X$ versus $V_X$ will look like this:\n\n1.  **Horizontal Axis ($V_X$):** Mark the threshold voltage $V_{th}$ and the point $V_{th} + 1$.\n2.  **Vertical Axis ($I_X$):** Represents current.\n3.  **For $V_X < V_{th}$:** The curve is a flat line on the horizontal axis ($I_X = 0$).\n4.  **For $V_{th} \\le V_X \\le V_{th} + 1$:** The curve rises as a parabola ($I_X \\propto (V_X - V_{th})^2$). It starts at $(V_{th}, 0)$ and curves upwards. At $V_X = V_{th} + 1$, the current is $I_X = k/2$.\n5.  **For $V_X > V_{th} + 1$:** The curve continues as a straight line with a constant positive slope ($I_X \\propto V_X$). At the transition point $V_X = V_{th} + 1$, the value is $k(1 - 0.5) = k/2$, which matches the end of the parabolic section. The slope of this line is continuous with the slope of the parabola at the transition point.\n\n**Sketch:**\n\n```\n      I_X\n       |          /  (Linear/Triode region)\n       |         /  I_X = k(V_X - V_th - 0.5)\n       |        /\n       |       /  (Saturation region)\n       |      /   I_X = (k/2)(V_X - V_th)^2\n       |     /\n       |    /\n       |   /\n       |  /\n-------|-/----------------------- V_X\n       | V_th      V_th + 1\n       |\n    (Cutoff region, I_X = 0)\n```\n\n**Key features of the sketch:**\n*   **Cutoff:** $I_X = 0$ for $V_X < V_{th}$.\n*   **Saturation:** Parabolic increase for $V_{th} < V_X < V_{th} + 1$ V.\n*   **Triode:** Linear increase for $V_X > V_{th} + 1$ V.\n*   The transition at $V_X = V_{th} + 1$ V is smooth (continuous value and slope).",
        "format": "markdown",
        "sha256": "efcd9ddd5dff864d839ed343d5f9052b828d912557339f2ce830f2ee242e4545"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, quadratic saturation rise from Vth to Vth + 1 V, and roughly linear triode-region rise beyond the transition, with consistent current expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 7636,
        "total_tokens": 8740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1104,
        "output_tokens": 7636,
        "total_tokens": 8740,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6086,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the analysis of whether the device can act as a current source:\n\n**1. Circuit Analysis:**\n*   **Component:** The symbol represents a MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor). The vertical bar on the left is the Gate, the vertical bar in the center is the channel, and the connections are Drain (top), Source (bottom), and Gate (left).\n*   **Connections:**\n    *   The **Gate** is connected to ground ($V_G = 0$ V).\n    *   The **Source** is connected to ground ($V_S = 0$ V).\n    *   Therefore, the gate-to-source voltage is **$V_{GS} = V_G - V_S = 0$ V**.\n*   **Input:** There is a current $I_x$ flowing into the Drain terminal.\n\n**2. Can it act as a current source?**\nThe answer depends on the type of MOSFET, which is indicated by the symbol and the threshold voltage ($V_{th}$).\n\n*   **Case A: Enhancement-mode MOSFET (Most Common)**\n    *   In a standard enhancement-mode NMOS transistor, the threshold voltage $V_{th} > 0$.\n    *   For the transistor to turn ON (conduct current), we need $V_{GS} > V_{th}$.\n    *   Here, $V_{GS} = 0$ V. Since $0 < V_{th}$, the transistor is in the **cutoff region** (it is OFF).\n    *   In cutoff, the drain current $I_D \\approx 0$. The device acts like an open switch.\n    *   **Conclusion:** No, an enhancement-mode MOSFET in this configuration cannot act as a current source. The external current $I_x$ cannot flow through the device, and the voltage at the drain would rise indefinitely (until breakdown).\n\n*   **Case B: Depletion-mode MOSFET**\n    *   The symbol in the figure has a **solid vertical line** for the channel. In many circuit diagrams, a solid line indicates a **depletion-mode** MOSFET (whereas a broken line indicates enhancement-mode).\n    *   For a depletion-mode NMOS, the threshold voltage $V_{th} < 0$ (negative).\n    *   Here, $V_{GS} = 0$ V. Since $0 > V_{th}$ (e.g., $0 > -2$V), the transistor is **ON**.\n    *   With $V_{GS} = 0$, the drain current is determined by the device parameters and is approximately constant, known as $I_{DSS}$ (drain-source saturation current with zero gate bias):\n        $$I_D = I_{DSS} = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (0 - V_{th})^2$$\n    *   Assuming the drain voltage $V_D$ is high enough ($V_{DS} \\ge -V_{th}$), the transistor operates in the **saturation region**. In this region, a MOSFET acts as a constant current source (specifically, a current sink).\n    *   **Conclusion:** Yes, if the device is a depletion-mode MOSFET, it acts as a constant current source (sink) with a fixed current value $I_{DSS}$. The current $I_x$ in the diagram would be equal to this $I_{DSS}$.\n\n**Summary:**\n*   If the device is a standard **enhancement-mode MOSFET**, the answer is **No** (it is turned off because $V_{GS}=0$).\n*   If the device is a **depletion-mode MOSFET** (suggested by the solid channel line), the answer is **Yes** (it acts as a constant current source/sink with current $I_{DSS}$).\n\nGiven that depletion-mode MOSFETs are less common in modern circuits but specifically denoted by this symbol style, the technically correct answer based on the diagram is **Yes**, it can act as a current source (specifically a current sink of value $I_{DSS}$). However, in the context of standard enhancement MOSFETs often used in such problems, the answer would be **No**.",
        "format": "markdown",
        "sha256": "746097ba2c371156024906208886013f39f981a1307ba28c3e66bf74148c209e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer concludes that the device as drawn can act as a current source, contrary to the golden solution. It also misreads the PMOS’s terminals and diode connection, treating it as a depletion-mode NMOS instead.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 425,
        "output_tokens": 15651,
        "total_tokens": 16076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 425,
        "output_tokens": 15651,
        "total_tokens": 16076,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the analysis:\n\n**1. Identification of the Component and Connections**\n*   The component $M_1$ is an **N-channel MOSFET (NMOS)**. We can identify this because the arrow on the body/bulk terminal points inward (towards the channel), which is the standard symbol for an NMOS device (indicating a P-type body and N-type channel).\n*   **Gate (G):** The left terminal is connected to ground, so $V_G = 0$ V.\n*   **Source (S):** The bottom terminal is connected to ground, so $V_S = 0$ V.\n*   **Drain (D):** The top terminal is where the current $I_X$ flows in.\n\n**2. Analysis of Gate-Source Voltage ($V_{GS}$)**\nSince both the Gate and the Source are connected to ground:\n$$V_{GS} = V_G - V_S = 0\\text{ V} - 0\\text{ V} = 0\\text{ V}$$\n\n**3. Can it act as a current source?**\nThe answer depends on the type of MOSFET, but in most standard contexts, the answer is **No**.\n\n*   **Case 1: Enhancement-mode NMOS (Standard Assumption)**\n    *   For a standard enhancement-mode NMOS transistor, the threshold voltage $V_{th}$ is positive ($V_{th} > 0$).\n    *   For the transistor to conduct current (turn on), the gate-source voltage must be greater than the threshold voltage: $V_{GS} > V_{th}$.\n    *   Here, $V_{GS} = 0$ V. Since $0 < V_{th}$, the transistor is in the **cutoff region**.\n    *   In cutoff, the drain current $I_D$ (which is $I_X$) is ideally zero. The device acts like an open switch. Therefore, it cannot act as a useful current source.\n\n*   **Case 2: Depletion-mode NMOS (Possible based on symbol)**\n    *   In some schematic conventions, a solid vertical line for the channel (as seen here) indicates a **depletion-mode** MOSFET. For depletion-mode NMOS, the threshold voltage $V_{th}$ is negative ($V_{th} < 0$).\n    *   The condition to turn on is $V_{GS} > V_{th}$. Since $0 > \\text{negative number}$, the transistor would be **ON**.\n    *   At $V_{GS} = 0$ V, a depletion MOSFET conducts a constant current known as $I_{DSS}$ (drain-source short-circuit current).\n    *   If the drain voltage $V_D$ (determined by the external circuit) is high enough ($V_{DS} \\ge -V_{th}$), the transistor operates in the saturation region and acts as a constant current source (specifically, a current sink pulling $I_{DSS}$ to ground).\n\n**Conclusion**\nAssuming the standard case of an **enhancement-mode MOSFET** (which is the default in most electronics problems unless specified otherwise), the device **cannot** act as a current source because $V_{GS} = 0$ V puts it in cutoff, resulting in zero current ($I_X \\approx 0$).\n\nIf the device is specifically a **depletion-mode MOSFET**, then **yes**, it can act as a current source (providing a constant current $I_{DSS}$), provided the drain voltage is sufficient to keep it in saturation.",
        "format": "markdown",
        "sha256": "f3a15c09803b4f4aabde029d1233df3a34a5964f56fcb5237ef50900503afd45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 and its terminals as an NMOS with VGS = 0, then says it is off. The actual device is a diode-connected PMOS with its source at the top; it conducts and presents low impedance (about 1/gm), so it cannot act as a current source. The golden solution explicitly assigns 0 to this mistaken reasoning.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 425,
        "output_tokens": 11644,
        "total_tokens": 12069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10859,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 425,
        "output_tokens": 11644,
        "total_tokens": 12069,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10859,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit symbol and connections provided in the figure, here is the analysis:\n\n**1. Identification of the Device**\n*   The symbol represents a **MOSFET** (Metal-Oxide-Semiconductor Field-Effect Transistor).\n*   The arrow on the substrate/body terminal points inward (towards the channel), which indicates it is an **NMOS** transistor.\n*   Crucially, the vertical bar representing the channel is a **solid line**. In standard electronic symbols (such as those used in textbooks like Razavi's *Fundamentals of Microelectronics*), a solid channel line indicates a **depletion-mode** MOSFET. (An enhancement-mode MOSFET is typically represented by a broken or dashed channel line consisting of three segments).\n\n**2. Circuit Connections and Biasing**\n*   **Gate (G):** Connected to ground ($V_G = 0$ V).\n*   **Source (S):** Connected to ground ($V_S = 0$ V).\n*   **Drain (D):** The terminal where current $I_X$ enters.\n*   Therefore, the gate-to-source voltage is **$V_{GS} = V_G - V_S = 0$ V**.\n\n**3. Operation Analysis**\n*   For a **depletion-mode NMOS** transistor, the threshold voltage ($V_{th}$ or $V_{to}$) is **negative** ($V_{th} < 0$). This means the channel exists even when $V_{GS} = 0$.\n*   The condition for the transistor to be ON is $V_{GS} > V_{th}$. Since $0 > V_{th}$ (a negative number), the transistor is **turned ON**.\n*   With $V_{GS} = 0$, the drain current is determined by the device parameters and is equal to **$I_{DSS}$** (the saturation drain current at zero gate-source voltage). The equation is approximately:\n    $$I_X \\approx I_{DSS} = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{th})^2$$\n    (ignoring channel length modulation for simplicity).\n\n**4. Conclusion**\n*   As long as the drain voltage ($V_{DS}$) is high enough to keep the transistor in the **saturation region** (specifically $V_{DS} \\ge V_{GS} - V_{th} = -V_{th}$), the current $I_X$ will remain constant and independent of the voltage across the device (mostly).\n*   A device that provides a constant current regardless of the voltage across it is, by definition, a **current source**.\n\n**Answer:**\n**Yes**, the device can act as a current source. Specifically, it acts as a constant current sink (drawing a constant current $I_{DSS}$ from the top node to ground). This is a standard configuration for a depletion-mode MOSFET current source.\n\n*(Note: If the symbol were interpreted as an enhancement-mode MOSFET—which is less likely given the solid line—the transistor would be in cutoff because $V_{GS} = 0 < V_{th}$, resulting in $I_X = 0$, which would not be a useful current source. However, in the context of such diagrams, the solid line signifies a depletion device intended to operate as a current source.)*",
        "format": "markdown",
        "sha256": "5a23953b86fc0c43b930aede7d26b03b75e5f03ca278113744119941c73f5970"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the correct one. M1 is a diode-connected PMOS with its source at the top and gate/drain grounded; it presents a low impedance (about 1/gm), not a constant-current source. The answer also misreads the device and its connections.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 425,
        "output_tokens": 9944,
        "total_tokens": 10369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9218,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 425,
        "output_tokens": 9944,
        "total_tokens": 10369,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9218,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Component Identification\n*   **Transistor ($M_1$)**: The symbol represents a **PMOS transistor**. We can identify this because the arrow on the source terminal points inward (towards the channel/gate). In a PMOS transistor, current flows from the Source to the Drain.\n    *   **Source**: The top terminal (connected to $R_S$). The arrow indicates the direction of conventional current flow for the substrate, or simply identifies the source terminal for a PMOS (arrow points in).\n    *   **Drain**: The bottom terminal (connected to $R_D$).\n    *   **Gate**: The left terminal (connected to $V_{\\text{in}}$).\n*   **Resistors**:\n    *   **$R_S$**: A resistor connected between the power supply $V_{DD}$ and the Source of the transistor. This acts as a **source degeneration resistor**.\n    *   **$R_D$**: A resistor connected between the Drain of the transistor and Ground. This acts as the **load resistor** (or drain resistor).\n*   **Voltages**:\n    *   **$V_{DD}$**: Positive DC supply voltage.\n    *   **$V_{\\text{in}}$**: Input signal voltage applied to the Gate.\n    *   **$V_{\\text{out}}$**: Output signal voltage taken from the Drain.\n\n### 2. Circuit Configuration\nThis circuit is a **Common-Source Amplifier with Source Degeneration**.\n*   **Input** is applied to the **Gate**.\n*   **Output** is taken from the **Drain**.\n*   The **Source** is not at AC ground; it is connected to $V_{DD}$ (AC ground) through the resistor $R_S$.\n\nAlthough the power supply and ground are swapped compared to a standard NMOS common-source circuit (due to the use of a PMOS), the topology is functionally analogous. Current flows from $V_{DD}$, through $R_S$, through the transistor $M_1$, through $R_D$, to Ground.\n\n### 3. DC Analysis (Biasing)\n*   **Current Path**: A DC current $I_D$ flows from $V_{DD}$ through $R_S$, the Source-Drain channel of $M_1$, and $R_D$ to ground.\n*   **Voltages**:\n    *   The voltage at the source ($V_S$) is $V_{DD} - I_D R_S$.\n    *   The voltage at the drain ($V_{\\text{out}}$) is $I_D R_D$.\n    *   The source-gate voltage is $V_{SG} = V_S - V_{\\text{in}} = (V_{DD} - I_D R_S) - V_{\\text{in}}$.\n*   **Operation**: For the PMOS transistor to be turned on and in saturation (active region for amplification), we need $V_{SG} > |V_{th}|$ (where $V_{th}$ is the threshold voltage). Also, for saturation, $V_{SD} \\ge V_{SG} - |V_{th}|$, which implies $V_{\\text{out}} \\le V_{\\text{in}} + |V_{th}|$.\n\n### 4. Small-Signal Analysis (AC Analysis)\nTo analyze the amplification properties, we consider the small-signal model. Let $g_m$ be the transconductance of $M_1$.\n\n*   **Gain Derivation**:\n    1.  The input voltage $v_{\\text{in}}$ is at the gate.\n    2.  Let $v_s$ be the small-signal voltage at the source. Since $V_{DD}$ is an AC ground, $R_S$ connects the source to ground.\n    3.  The small-signal current flowing from Source to Drain is $i_d = g_m v_{sg} = g_m(v_s - v_{\\text{in}})$.\n    4.  **KCL at Source Node**: The current leaving the source node through $R_S$ plus the current leaving through the transistor channel must sum to zero (assuming $r_o = \\infty$ for simplicity).\n        $$ \\frac{v_s}{R_S} + g_m(v_s - v_{\\text{in}}) = 0 $$\n        $$ v_s \\left( \\frac{1}{R_S} + g_m \\right) = g_m v_{\\text{in}} $$\n        $$ v_s = v_{\\text{in}} \\frac{g_m R_S}{1 + g_m R_S} $$\n    5.  **Calculate $v_{sg}$**:\n        $$ v_{sg} = v_s - v_{\\text{in}} = v_{\\text{in}} \\left( \\frac{g_m R_S}{1 + g_m R_S} - 1 \\right) = - \\frac{v_{\\text{in}}}{1 + g_m R_S} $$\n    6.  **Output Voltage**: The current $i_d = g_m v_{sg}$ flows into the drain node and then through $R_D$ to ground.\n        $$ v_{\\text{out}} = i_d R_D = g_m v_{sg} R_D = g_m \\left( - \\frac{v_{\\text{in}}}{1 + g_m R_S} \\right) R_D $$\n    7.  **Voltage Gain ($A_v$)**:\n        $$ A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = - \\frac{g_m R_D}{1 + g_m R_S} $$\n\n### 5. Key Characteristics\n*   **Inverting Amplifier**: The negative sign in the gain equation indicates that the output voltage is $180^\\circ$ out of phase with the input voltage. An increase in $V_{\\text{in}}$ decreases $V_{SG}$, reducing current $I_D$, which reduces the voltage drop across $R_D$, thus lowering $V_{\\text{out}}$.\n*   **Effect of $R_S$ (Source Degeneration)**:\n    *   The resistor $R_S$ reduces the overall gain compared to a simple common-source amplifier (where $R_S=0$ and gain is $-g_m R_D$).\n    *   However, it makes the gain more stable and less dependent on the transistor's transconductance $g_m$.\n    *   If $g_m R_S \\gg 1$ (strong degeneration), the gain simplifies to:\n        $$ A_v \\approx - \\frac{R_D}{R_S} $$\n    *   This linearizes the amplifier and increases its bandwidth (by reducing the Miller effect capacitance).\n*   **Input Impedance**: Ideally infinite at low frequencies because the gate of a MOSFET draws no current ($Z_{\\text{in}} = \\infty$).\n*   **Output Impedance**: Approximately equal to $R_D$ (in parallel with the output resistance of the transistor, which is high due to degeneration).\n\n**Summary**: The circuit is a **PMOS Common-Source amplifier with source degeneration**. It functions as an inverting voltage amplifier with a gain approximately equal to $-R_D/R_S$ (for large $g_m R_S$).",
        "format": "markdown",
        "sha256": "8b35f7351b809325b4206463a4cd1a74a44c7022242150e3769f954313833ab2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and derives the inverting gain \u001b[?]-g_mR_D/(1+g_mR_S).",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 10409,
        "total_tokens": 11606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8780,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 10409,
        "total_tokens": 11606,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8780,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis.\n\n### 1. Circuit Identification and Components\n*   **Transistor ($M_1$):** The symbol shows a MOSFET with an arrow on the top terminal pointing inwards towards the channel. This indicates a **PMOS transistor**.\n    *   **Source (S):** The top terminal (where the arrow is), connected to $R_S$. In a PMOS, current flows from Source to Drain.\n    *   **Drain (D):** The bottom terminal, connected to $R_D$.\n    *   **Gate (G):** The left terminal, connected to $V_{\\text{in}}$.\n*   **Resistors:**\n    *   **$R_S$:** Connected between the power supply $V_{DD}$ and the Source of the transistor. This acts as a **source degeneration resistor**.\n    *   **$R_D$:** Connected between the Drain of the transistor and Ground. This acts as the **drain load resistor**.\n*   **Input/Output:**\n    *   **$V_{\\text{in}}$:** Input signal applied to the Gate.\n    *   **$V_{\\text{out}}$:** Output signal taken from the Drain.\n\n### 2. Circuit Configuration\nThis circuit is a **Common-Source Amplifier with Source Degeneration** (specifically for a PMOS transistor).\n*   The input is at the Gate.\n*   The output is at the Drain.\n*   The Source is connected to $V_{DD}$ through a resistor $R_S$ (which is an AC ground for small-signal analysis).\n\n### 3. DC Analysis (Biasing)\nIn DC analysis, capacitors are open circuits (none here), and we look at the steady-state operation.\n*   **Current Path:** Current flows from $V_{DD}$, through $R_S$, through the Source-Drain channel of $M_1$, through $R_D$, to Ground.\n*   **Operation:** For the transistor to work as an amplifier, it must be biased in the **saturation region**.\n    *   Condition for PMOS to be ON: $V_{SG} > |V_{th}|$ (where $V_{th}$ is the threshold voltage, typically negative for PMOS, so $V_{SG} - |V_{th}| > 0$).\n    *   $V_{SG} = V_S - V_{\\text{in}}$.\n    *   $V_S = V_{DD} - I_D R_S$.\n    *   $V_{\\text{out}} = V_D = I_D R_D$.\n\n### 4. Small-Signal (AC) Analysis\nTo analyze the amplification properties, we look at the small-signal behavior. We replace DC voltage sources ($V_{DD}$) with AC ground.\n\n*   **Small-Signal Model:**\n    *   The top of $R_S$ is connected to AC ground. So, $R_S$ is connected from the Source to ground.\n    *   The bottom of $R_D$ is connected to ground. So, $R_D$ is connected from the Drain to ground.\n    *   The transistor is modeled by a transconductance $g_m$ and output resistance $r_o$ (often ignored for simple gain calculations).\n\n*   **Deriving Voltage Gain ($A_v = v_{\\text{out}} / v_{\\text{in}}$):**\n    Let $v_s$ be the small-signal voltage at the source and $v_{\\text{out}}$ be the voltage at the drain.\n    The gate voltage is $v_{\\text{in}}$.\n    The source-gate voltage is $v_{sg} = v_s - v_{\\text{in}}$.\n\n    **KCL at Source Node:**\n    Current leaving through $R_S$ + Current entering transistor (from source) = 0.\n    $$ \\frac{v_s}{R_S} + g_m v_{sg} = 0 $$\n    $$ \\frac{v_s}{R_S} + g_m(v_s - v_{\\text{in}}) = 0 $$\n    $$ v_s \\left( \\frac{1}{R_S} + g_m \\right) = g_m v_{\\text{in}} $$\n    $$ v_s = v_{\\text{in}} \\frac{g_m R_S}{1 + g_m R_S} $$\n\n    **KCL at Drain Node (Output):**\n    Current entering from transistor = Current leaving through $R_D$.\n    $$ g_m v_{sg} = \\frac{v_{\\text{out}}}{R_D} $$\n    $$ v_{\\text{out}} = R_D \\cdot g_m (v_s - v_{\\text{in}}) $$\n\n    Substituting $(v_s - v_{\\text{in}})$:\n    From the source equation: $v_s - v_{\\text{in}} = v_{\\text{in}} \\left( \\frac{g_m R_S}{1 + g_m R_S} - 1 \\right) = v_{\\text{in}} \\left( \\frac{-1}{1 + g_m R_S} \\right)$.\n\n    So,\n    $$ v_{\\text{out}} = R_D \\cdot g_m \\cdot v_{\\text{in}} \\left( \\frac{-1}{1 + g_m R_S} \\right) $$\n\n    **Voltage Gain:**\n    $$ A_v = \\frac{v_{\\text{out}}}{v_{\\text{in}}} = - \\frac{g_m R_D}{1 + g_m R_S} $$\n\n### 5. Key Characteristics\n1.  **Inverting Amplifier:** The negative sign in the gain equation indicates that the output is $180^\\circ$ out of phase with the input. If $V_{\\text{in}}$ increases, $V_{SG}$ decreases, the transistor conducts less current, and the voltage drop across $R_D$ ($V_{\\text{out}}$) decreases.\n2.  **Effect of Source Degeneration ($R_S$):**\n    *   **Gain Reduction:** The gain is reduced by the factor $(1 + g_m R_S)$.\n    *   **Stability:** If $g_m R_S \\gg 1$, the gain simplifies to $A_v \\approx - \\frac{R_D}{R_S}$. This makes the gain dependent only on the resistor ratio, which is stable and independent of the transistor's parameters ($g_m$), temperature, or process variations.\n    *   **Linearity:** Source degeneration improves the linearity of the amplifier (reduces distortion).\n3.  **Impedances:**\n    *   **Input Impedance:** Very high (ideally infinite) because the gate of a MOSFET draws no DC current.\n    *   **Output Impedance:** Looking into the output node, we see $R_D$ in parallel with the output resistance of the degenerated transistor (which is roughly $r_o(1 + g_m R_S)$). This increases the output impedance compared to a simple common-source amplifier without $R_S$.\n\n**Summary:** The circuit is a **PMOS Common-Source amplifier with source degeneration**. It functions as an inverting voltage amplifier with a gain of approximately $-R_D/R_S$ (for large $g_m R_S$).",
        "format": "markdown",
        "sha256": "a8ac80991ffaa447bbf18a9740ac21a058768f3416680fe19dab64c6859129d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), as required for full credit.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 7515,
        "total_tokens": 8712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 7515,
        "total_tokens": 8712,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5892,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Component Identification and Transistor Type\n*   **Transistor ($M_1$):** The symbol shows a MOSFET with an arrow on the top terminal pointing inwards towards the channel. In standard MOSFET symbols, an arrow pointing **in** at the source terminal indicates a **PMOS transistor**.\n    *   **Source ($S$):** The top terminal (connected to $R_S$). In a PMOS, the source is at the higher potential.\n    *   **Gate ($G$):** The left terminal (connected to $V_{in}$).\n    *   **Drain ($D$):** The bottom terminal (connected to $V_{out}$ and $R_D$).\n*   **Resistors:**\n    *   $R_S$: Connected between the Source and $V_{DD}$. This is a **source degeneration resistor**.\n    *   $R_D$: Connected between the Drain and Ground. This is the **drain load resistor**.\n*   **Supplies:** $V_{DD}$ (positive supply voltage) and Ground (0V).\n\n### 2. Circuit Configuration\n*   **Input:** Applied to the **Gate** ($V_{in}$).\n*   **Output:** Taken from the **Drain** ($V_{out}$).\n*   **Source:** Connected to AC ground ($V_{DD}$) through resistor $R_S$.\n\nThis topology is a **Common Source (CS) amplifier with source degeneration** (also known as a source-resistor degenerated amplifier). Since it uses a PMOS transistor, the current flows from $V_{DD}$, through $R_S$, through the transistor (Source to Drain), and through $R_D$ to ground.\n\n### 3. DC Analysis (Biasing)\n*   **Current Flow:** A DC current $I_D$ flows from $V_{DD}$ down to ground.\n    $$I_D = \\frac{V_{DD} - V_{out}}{R_S + R_{on, M1}} \\approx \\frac{V_{DD}}{R_S + R_D}$$ (roughly, depending on transistor state).\n    More accurately, $V_{out} = I_D R_D$ and $V_S = V_{DD} - I_D R_S$.\n*   **Turn-on Condition:** For the PMOS transistor $M_1$ to conduct, the source-gate voltage $V_{SG}$ must be greater than the threshold voltage $|V_{th}|$.\n    $$V_{SG} = V_S - V_{in} = (V_{DD} - I_D R_S) - V_{in} > |V_{th}|$$\n    This implies that $V_{in}$ must be sufficiently low (negative relative to the source) to turn the transistor on.\n\n### 4. AC Small-Signal Analysis\nTo analyze the AC behavior, we replace the DC sources with AC grounds ($V_{DD}$ becomes ground).\n*   **Model:** The transistor is modeled by its transconductance $g_m$ and output resistance $r_o$ (often ignored for basic analysis). The resistor $R_S$ is now connected from the Source to ground. The resistor $R_D$ is connected from the Drain to ground.\n\n**Voltage Gain ($A_v$):**\nThis is a degenerated common-source amplifier. The voltage gain is given by:\n$$A_v = \\frac{v_{out}}{v_{in}} = - \\frac{g_m R_D}{1 + g_m R_S}$$\n*(Assuming $r_o$ is infinite. If $r_o$ is included, the numerator and denominator terms become more complex, but the general form holds).*\n\n*   **Approximation:** If the transconductance gain $g_m R_S \\gg 1$, the gain simplifies to:\n    $$A_v \\approx - \\frac{R_D}{R_S}$$\n    This shows that the gain is determined primarily by the ratio of the resistors, making it stable and independent of the transistor's parameters ($g_m$).\n\n**Phase:**\nThe negative sign indicates that the amplifier is **inverting**.\n*   If $V_{in}$ increases (becomes less negative/more positive), $V_{SG}$ decreases ($V_S - V_{in}$ gets smaller).\n*   This causes the drain current $I_D$ to decrease.\n*   Since $V_{out} = I_D R_D$, a decrease in current leads to a decrease in $V_{out}$.\n*   Thus, an increase in input leads to a decrease in output (180° phase shift).\n\n**Input Impedance ($Z_{in}$):**\n*   Ideally, the gate of a MOSFET draws no current, so **$Z_{in} = \\infty$** (at low frequencies).\n\n**Output Impedance ($Z_{out}$):**\n*   Looking into the output node (Drain), we see the resistor $R_D$ in parallel with the output resistance of the transistor looking into the drain.\n*   For a degenerated source, the output resistance looking into the drain is approximately $r_o(1 + g_m R_S)$.\n*   So, $Z_{out} \\approx R_D \\parallel [r_o(1 + g_m R_S)]$. If $R_D$ is much smaller than the transistor's output resistance, $Z_{out} \\approx R_D$.\n\n### 5. Key Features and Advantages\n1.  **Linearity:** The resistor $R_S$ introduces negative feedback. This linearizes the transfer function ($V_{out}$ vs $V_{in}$), reducing distortion compared to a simple common-source amplifier without $R_S$.\n2.  **Gain Stability:** As shown in the gain equation ($A_v \\approx -R_D/R_S$), the gain becomes less sensitive to variations in the transistor's transconductance $g_m$ (which varies with temperature and manufacturing process).\n3.  **Bandwidth:** Source degeneration reduces the effective Miller capacitance (the multiplication of gate-drain capacitance $C_{gd}$ by the gain), which can help increase the bandwidth of the amplifier.\n\n**Summary:** The circuit is a **PMOS Common Source amplifier with source degeneration**. It acts as an inverting amplifier with a gain of approximately $-R_D/R_S$, offering improved linearity and stability.",
        "format": "markdown",
        "sha256": "33557b069fd29e4898a5aa8eb072dc47c3e7d4b7ead21f8cc1dc36c4b6d3ea66"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), satisfying the full-credit rule. The imprecise DC-current approximation is secondary.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 8837,
        "total_tokens": 10034,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1197,
        "output_tokens": 8837,
        "total_tokens": 10034,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7449,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain Amplifier**, also widely known as a **Source Follower**.\n\n*   **Transistor ($M_1$):** The symbol represents an **NMOS transistor**.\n    *   The **Gate** is connected to the input voltage $V_{in}$.\n    *   The **Drain** is connected to the supply voltage $V_{DD}$.\n    *   The **Source** (indicated by the arrow pointing outwards) is connected to the output node $V_{out}$ and the resistor $R_S$.\n*   **Resistor ($R_S$):** This is a source resistor connected from the source terminal to ground.\n*   **Input/Output:** The input signal $V_{in}$ is applied to the gate, and the output signal $V_{out}$ is taken from the source. Since the drain is connected to $V_{DD}$ (which is an AC ground), this is a common-drain configuration.\n\n### 2. DC Analysis (Biasing)\nFor the NMOS transistor $M_1$ to operate in the saturation region (active mode):\n*   The gate-source voltage must exceed the threshold voltage: $V_{GS} > V_{th}$.\n*   $V_{GS} = V_{in} - V_{out}$.\n*   The drain current $I_D$ flows through the resistor $R_S$, creating the output voltage: $V_{out} = I_D \\cdot R_S$.\n\nIn a simplified DC model (ignoring channel length modulation), the relationship is approximately:\n$$V_{out} \\approx V_{in} - V_{th}$$\nThis means the output voltage \"follows\" the input voltage, minus the threshold voltage drop. This is why it is called a **Source Follower**.\n\n### 3. Small-Signal (AC) Analysis\nTo analyze the AC performance, we use the small-signal model of the MOSFET. Let $g_m$ be the transconductance.\n\n**Voltage Gain ($A_v$):**\nThe small-signal output voltage $v_{out}$ is developed across $R_S$ by the current generated by the transistor.\nThe current flowing from drain to source is $g_m v_{gs}$.\nSince $v_{gs} = v_{in} - v_{out}$, the current is $g_m(v_{in} - v_{out})$.\n\nThis current flows through $R_S$ to ground:\n$$v_{out} = g_m(v_{in} - v_{out}) R_S$$\n\nRearranging to solve for the gain $\\frac{v_{out}}{v_{in}}$:\n$$v_{out} = g_m R_S v_{in} - g_m R_S v_{out}$$\n$$v_{out} (1 + g_m R_S) = g_m R_S v_{in}$$\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n\n*   **Observation:** Since $g_m R_S$ is positive, the gain is always **less than 1** but close to it (especially if $g_m R_S \\gg 1$). This confirms the \"follower\" behavior.\n\n**Output Resistance ($R_{out}$):**\nTo find the output resistance, we turn off the input source ($v_{in} = 0$) and apply a test voltage $v_x$ at the output node.\n*   Looking into the source terminal of the MOSFET, the resistance is approximately $\\frac{1}{g_m}$.\n*   This is in parallel with the external resistor $R_S$.\n\n$$R_{out} = \\frac{1}{g_m} \\parallel R_S = \\frac{R_S}{1 + g_m R_S}$$\n\n*   **Observation:** The output resistance is **low** (typically a few hundred ohms to a few kilo-ohms), which is a key characteristic of this circuit.\n\n**Input Resistance ($R_{in}$):**\n*   The gate of a MOSFET draws negligible current (infinite impedance at low frequencies).\n*   Therefore, **$R_{in} \\approx \\infty$**.\n\n### 4. Summary of Characteristics\n| Feature | Value / Description |\n| :--- | :--- |\n| **Circuit Type** | Common-Drain Amplifier / Source Follower |\n| **Voltage Gain** | $< 1$ (typically $\\approx 1$) |\n| **Input Impedance** | Very High ($\\infty$) |\n| **Output Impedance** | Low ($\\approx 1/g_m$) |\n| **Phase Shift** | $0^\\circ$ (Output is in phase with Input) |\n\n### 5. Application\nBecause of its high input impedance and low output impedance, this circuit is primarily used as a **buffer amplifier**. It isolates a high-impedance source (like a sensor or a previous high-gain stage) from a low-impedance load (like a transmission line or a speaker), preventing the load from affecting the input signal while providing current drive capability.",
        "format": "markdown",
        "sha256": "8661c43c65b01fbc17a6ece46d1d953c3585ef82669469a9b84d07abcb0a3399"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives its positive, less-than-unity gain, gm·RS/(1 + gm·RS), satisfying the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5119,
        "total_tokens": 6058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 5119,
        "total_tokens": 6058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3971,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Drain Amplifier**, also commonly known as a **Source Follower**.\n\n*   **Transistor ($M_1$):** The symbol represents an **N-channel MOSFET (NMOS)**. We can identify this because the arrow on the source terminal points outward (away from the channel), and the drain is connected to the higher potential ($V_{DD}$) while the source is connected towards ground.\n*   **Input ($V_{in}$):** Applied to the **Gate** of the transistor.\n*   **Output ($V_{out}$):** Taken from the **Source** of the transistor.\n*   **Drain:** Connected directly to the supply voltage $V_{DD}$ (which acts as an AC ground).\n*   **Load/Resistor ($R_S$):** A resistor connected from the source to ground.\n\n### 2. DC Analysis (Biasing)\nIn DC analysis, capacitors are open circuits (none here), and we determine the operating point.\n\n*   **Condition for Conduction:** For the NMOS to turn on, the gate-source voltage must exceed the threshold voltage ($V_{th}$):\n    $$V_{GS} = V_{in} - V_{out} > V_{th}$$\n*   **Current Flow:** A drain current $I_D$ flows from $V_{DD}$ through the transistor and down through $R_S$ to ground.\n*   **Output Voltage:** The output voltage is the voltage drop across $R_S$:\n    $$V_{out} = I_D \\cdot R_S$$\n*   **Relationship:** Since $I_D$ depends on $V_{GS}$ (which is $V_{in} - V_{out}$), the output voltage $V_{out}$ will \"follow\" the input voltage $V_{in}$, but shifted down by the threshold voltage and some overdrive voltage. Approximately:\n    $$V_{out} \\approx V_{in} - V_{th}$$\n    This is why it's called a \"Source Follower\"—the source voltage follows the gate voltage.\n\n### 3. Small-Signal AC Analysis\nTo analyze the AC behavior (gain, impedance), we use the small-signal model. Let $g_m$ be the transconductance, $r_o$ be the output resistance of the transistor, and consider the body effect parameter $g_{mb}$ (since the source is not at ground potential, the body effect is present).\n\n**Voltage Gain ($A_v$):**\nApplying Kirchhoff's Current Law (KCL) at the output node ($V_{out}$):\nThe current entering from the transistor is approximately $g_m v_{gs} + g_{mb} v_{sb}$.\nThe current leaving through $R_S$ is $v_{out} / R_S$.\n\nUsing the small-signal relationships:\n*   $v_{gs} = v_{in} - v_{out}$\n*   $v_{sb} = v_{out} - 0 = v_{out}$ (assuming bulk is grounded)\n\nThe KCL equation (ignoring $r_o$ for simplicity first) is:\n$$g_m(v_{in} - v_{out}) + g_{mb}v_{out} = \\frac{v_{out}}{R_S}$$\n$$g_m v_{in} = v_{out} \\left( \\frac{1}{R_S} + g_m - g_{mb} \\right)$$\n*Correction with standard body effect model:* The body effect current adds to the effective transconductance. The correct gain equation including body effect ($g_{mb}$) and output resistance ($r_o$) is:\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m (R_S || r_o)}{1 + (g_m + g_{mb})(R_S || r_o)}$$\n\n**Key Takeaway:** The voltage gain is always **less than 1** (but close to 1) and positive. This means the output voltage is in phase with the input voltage and slightly smaller in magnitude.\n\n**Input Impedance ($Z_{in}$):**\nLooking into the gate of a MOSFET, the impedance is extremely high (ideally infinite) because the gate is insulated by oxide.\n$$Z_{in} \\approx \\infty$$\n\n**Output Impedance ($Z_{out}$):**\nLooking into the source terminal (with $V_{in} = 0$), the impedance is low. It is determined by the transistor's output resistance looking into the source and the external resistor $R_S$.\n$$Z_{out} \\approx R_S \\parallel \\frac{1}{g_m + g_{mb}}$$\nSince $\\frac{1}{g_m}$ is typically small (a few ohms to tens of ohms), the output impedance is **low**.\n\n### 4. Summary of Characteristics\n| Feature | Value / Description |\n| :--- | :--- |\n| **Circuit Type** | Common-Drain Amplifier (Source Follower) |\n| **Voltage Gain ($A_v$)** | $\\approx 1$ (slightly less than unity, $A_v < 1$) |\n| **Input Impedance** | Very High (ideally $\\infty$) |\n| **Output Impedance** | Low ($\\approx 1/g_m$) |\n| **Phase Shift** | $0^\\circ$ (Output is in phase with Input) |\n| **Primary Function** | **Buffer** / Impedance Matcher. It takes a high-impedance signal and drives a low-impedance load without losing voltage amplitude. |",
        "format": "markdown",
        "sha256": "232aa6f2b60ea78d0a21053a51126144a27ada22ce3ccd4adb6ebb1d53370ef2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, with body effect and output resistance included as refinements.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 9338,
        "total_tokens": 10277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 9338,
        "total_tokens": 10277,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Source Follower**, also known as a **Common-Drain Amplifier**.\n\n*   **Transistor ($M_1$):** The symbol represents an N-channel MOSFET (NMOS). The arrow on the source terminal points outward, which is characteristic of an NMOS transistor.\n*   **Configuration:**\n    *   The input signal ($V_{in}$) is applied to the **Gate**.\n    *   The output signal ($V_{out}$) is taken from the **Source**.\n    *   The **Drain** is connected directly to the supply voltage $V_{DD}$. In AC analysis, $V_{DD}$ acts as an AC ground, making the drain the common terminal between input and output.\n\n### 2. DC Analysis (Biasing)\nIn DC operation, the circuit acts as a level shifter or a biasing circuit.\n*   For the transistor $M_1$ to be turned on (conducting current), the gate-source voltage $V_{GS}$ must be greater than the threshold voltage $V_{th}$.\n*   The relationship is: $V_{GS} = V_G - V_S = V_{in} - V_{out}$.\n*   Therefore, $V_{out} = V_{in} - V_{GS}$.\n*   Since $V_{GS}$ is roughly constant (determined by the bias current), the output voltage $V_{out}$ \"follows\" the input voltage $V_{in}$, but shifted down by the gate-source voltage drop ($V_{GS}$). Specifically, $V_{out} \\approx V_{in} - V_{th}$ (in saturation, roughly).\n\n### 3. AC Analysis (Small-Signal Model)\nLet's analyze the small-signal behavior to determine gain and impedance. We assume the transistor has a transconductance $g_m$ and output resistance $r_o$ (though $r_o$ is often ignored for simple analysis).\n\n*   **Voltage Gain ($A_v$):**\n    The small-signal output voltage $v_{out}$ is developed across $R_S$ by the current $g_m v_{gs}$.\n    $$v_{gs} = v_{in} - v_{out}$$\n    The current flowing into the source node is $g_m v_{gs}$. This current flows through $R_S$ to ground.\n    $$v_{out} = g_m v_{gs} R_S = g_m (v_{in} - v_{out}) R_S$$\n    $$v_{out} = g_m R_S v_{in} - g_m R_S v_{out}$$\n    $$v_{out} (1 + g_m R_S) = g_m R_S v_{in}$$\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_S}{1 + g_m R_S}$$\n\n    **Conclusion:** The voltage gain is always **less than 1** (positive) and close to unity (1) if $g_m R_S \\gg 1$. This is why it's called a \"Source Follower\"—the output voltage follows the input voltage.\n\n*   **Input Impedance ($Z_{in}$):**\n    Looking into the gate of a MOSFET, the impedance is extremely high (ideally infinite) because the gate is insulated from the channel.\n    $$Z_{in} \\approx \\infty$$\n\n*   **Output Impedance ($Z_{out}$):**\n    Looking into the source terminal, the impedance is low. If we ignore $r_o$, the output impedance looking into the source is approximately $1/g_m$. Since $R_S$ is in parallel with this, the total output impedance is:\n    $$Z_{out} = R_S \\parallel \\frac{1}{g_m} \\approx \\frac{1}{g_m}$$\n    (assuming $R_S \\gg 1/g_m$).\n\n### 4. Key Characteristics & Applications\n*   **Voltage Buffer:** Because the voltage gain is $\\approx 1$, it doesn't amplify voltage. However, it provides current gain.\n*   **Impedance Matching:** It has a **high input impedance** (doesn't load the previous stage) and a **low output impedance** (can drive heavy loads). This makes it an excellent buffer amplifier.\n*   **Phase:** The output is in phase with the input (positive gain).\n\n**Summary:** This is a **Source Follower** circuit used to buffer a signal, providing high input impedance and low output impedance with a voltage gain slightly less than 1.",
        "format": "markdown",
        "sha256": "b3ee17ba76d27a0358dbe4aa7585d12d695655484f9e28df6947fcd826a4e48c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives its positive, less-than-unity gain, gm·RS/(1 + gm·RS), matching the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 4110,
        "total_tokens": 5049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 939,
        "output_tokens": 4110,
        "total_tokens": 5049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\n*   **Components**: The circuit consists of a DC voltage supply $V_{DD}$, a resistor $R_D$, an NMOS transistor $M_1$, an input voltage $V_{in}$, and an output voltage $V_{out}$.\n*   **Transistor Type**: The symbol for $M_1$ represents an **NMOS transistor**. The arrow on the source/body terminal points inward (towards the channel), which is characteristic of an N-channel device. Even if interpreted as the arrow pointing out (PMOS), the biasing conditions (Gate at $V_{DD}$) would keep it permanently off for $V_{in} \\le V_{DD}$, making the circuit trivial. Thus, it is an NMOS.\n*   **Configuration**:\n    *   The **Gate** of the transistor is connected directly to $V_{DD}$. Since $V_{DD}$ is a constant DC voltage, the gate is at **AC ground**.\n    *   The **Input** ($V_{in}$) is applied to the **Source** terminal.\n    *   The **Output** ($V_{out}$) is taken from the **Drain** terminal.\n    *   This configuration is known as a **Common-Gate** amplifier (or circuit).\n\n### 2. DC Analysis (Large Signal Behavior)\nLet $V_{th}$ be the threshold voltage of the NMOS transistor.\n*   **Gate Voltage ($V_G$)**: $V_G = V_{DD}$.\n*   **Source Voltage ($V_S$)**: $V_S = V_{in}$.\n*   **Gate-Source Voltage ($V_{GS}$)**: $V_{GS} = V_G - V_S = V_{DD} - V_{in}$.\n\n**Operation Modes:**\n*   **Transistor ON**: The NMOS transistor conducts current when $V_{GS} > V_{th}$.\n    $$V_{DD} - V_{in} > V_{th} \\implies V_{in} < V_{DD} - V_{th}$$\n    In this state, current $I_D$ flows from the drain to the source (from $V_{DD}$ through $R_D$ and $M_1$ to $V_{in}$).\n    The output voltage is given by:\n    $$V_{out} = V_{DD} - I_D R_D$$\n    Since $I_D > 0$, $V_{out} < V_{DD}$.\n\n*   **Transistor OFF**: The transistor is cut off when $V_{GS} \\le V_{th}$.\n    $$V_{in} \\ge V_{DD} - V_{th}$$\n    In this state, $I_D \\approx 0$.\n    The output voltage is:\n    $$V_{out} = V_{DD} - (0)R_D = V_{DD}$$\n\n**Transfer Characteristic:**\n*   When $V_{in}$ is low (e.g., $0\\text{V}$), $V_{GS}$ is high ($V_{DD}$), the transistor is strongly ON, current is high, and $V_{out}$ is pulled low (close to $V_{in}$ or 0V).\n*   When $V_{in}$ is high (e.g., $V_{DD}$), $V_{GS}$ is low ($0\\text{V}$), the transistor is OFF, current is zero, and $V_{out}$ is high ($V_{DD}$).\n*   Therefore, as $V_{in}$ increases, $V_{out}$ increases. This is a **non-inverting** relationship.\n\n### 3. Small-Signal Analysis (AC Behavior)\nAssuming the circuit is biased in the active (saturation) region:\n*   **Gate**: AC ground ($v_g = 0$).\n*   **Source**: Input signal $v_s = v_{in}$.\n*   **Gate-Source small signal voltage**: $v_{gs} = v_g - v_s = -v_{in}$.\n\nThe small-signal drain current is $i_d = g_m v_{gs} = -g_m v_{in}$ (flowing from Drain to Source).\nAt the output node (Drain), applying KCL (assuming output resistance $r_o$ is large):\n$$ \\frac{v_{out}}{R_D} + i_d = 0 $$\n$$ \\frac{v_{out}}{R_D} - g_m v_{in} = 0 $$\n$$ v_{out} = g_m R_D v_{in} $$\n\n**Voltage Gain ($A_v$):**\n$$ A_v = \\frac{v_{out}}{v_{in}} = g_m R_D $$\nSince $g_m$ (transconductance) and $R_D$ (resistance) are positive, the gain is positive. This confirms the circuit is **non-inverting**.\n\n### 4. Impedances\n*   **Input Impedance ($Z_{in}$)**: Looking into the source terminal of a common-gate stage, the impedance is low.\n    $$ Z_{in} \\approx \\frac{1}{g_m} $$\n*   **Output Impedance ($Z_{out}$)**: Looking into the drain terminal (with $V_{in}$ grounded), the impedance is high.\n    $$ Z_{out} \\approx R_D \\parallel r_o \\approx R_D $$\n\n### 5. Summary / Function\n*   **Analog Function**: This is a **Common-Gate Amplifier**. It provides voltage amplification with a non-inverting phase ($A_v = g_m R_D$). It is characterized by low input impedance and high output impedance. It is often used for impedance matching or in cascode configurations.\n*   **Digital Function**: If $V_{in}$ is a digital signal (0 or $V_{DD}$):\n    *   $V_{in} = 0$ (Logic 0) $\\rightarrow$ Transistor ON $\\rightarrow$ $V_{out} \\approx 0$ (Logic 0).\n    *   $V_{in} = V_{DD}$ (Logic 1) $\\rightarrow$ Transistor OFF $\\rightarrow$ $V_{out} = V_{DD}$ (Logic 1).\n    *   Thus, it acts as a **Non-Inverting Buffer** (or simply a buffer), although a single transistor-resistor logic gate is not commonly used for this purpose due to static power consumption and lack of noise margins compared to CMOS.\n\n**Conclusion:** The circuit is a **Common-Gate NMOS amplifier** that acts as a **non-inverting amplifier** or buffer.",
        "format": "markdown",
        "sha256": "50d628440b3cabc4b245b8282ccd28e771f9fe9b71546aa45dc69c649bb414a4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology, the non-inverting gain of approximately +gmRD, and the low input resistance of approximately 1/gm. The additional DC and digital discussion is not needed for the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 10498,
        "total_tokens": 11403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 10498,
        "total_tokens": 11403,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9033,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification and Components\nThe circuit consists of the following components:\n*   **$V_{DD}$**: A DC voltage supply rail.\n*   **$R_D$**: A resistor connected between the supply $V_{DD}$ and the output node $V_{out}$. This acts as a drain load resistor.\n*   **$M_1$**: A MOSFET transistor. Based on the symbol (arrow pointing outwards on the source terminal, or based on the biasing requirements analyzed below), it is an **NMOS transistor**.\n*   **$V_{in}$**: The input voltage signal.\n*   **$V_{out}$**: The output voltage signal.\n\n### 2. Transistor Configuration\nTo understand the circuit, we need to identify the terminals of the MOSFET $M_1$:\n*   **Gate ($G$)**: The right-side terminal of the transistor symbol is connected to $V_{DD}$. Since $V_{DD}$ is a constant DC voltage, it acts as an **AC ground** for small-signal analysis.\n*   **Source ($S$)**: The bottom terminal (indicated by the arrow pointing outwards, characteristic of an NMOS source) is connected to the input $V_{in}$.\n*   **Drain ($D$)**: The top terminal is connected to the resistor $R_D$ and the output $V_{out}$.\n\nSince the **Gate is at AC ground**, the **Input is at the Source**, and the **Output is at the Drain**, this circuit configuration is a **Common Gate (CG) Amplifier**.\n\n### 3. DC Analysis (Biasing)\n*   The gate voltage is $V_G = V_{DD}$.\n*   The source voltage is $V_S = V_{in}$ (DC component).\n*   The gate-source voltage is $V_{GS} = V_G - V_S = V_{DD} - V_{in}$.\n*   For the NMOS transistor to be turned ON (conducting current), we must have $V_{GS} > V_{th}$ (threshold voltage). Therefore, $V_{DD} - V_{in} > V_{th}$, or **$V_{in} < V_{DD} - V_{th}$**.\n*   Current $I_D$ flows from the Drain to the Source. The path is from $V_{DD}$, through $R_D$, into the Drain, through the transistor to the Source, and out to $V_{in}$.\n*   The output voltage is given by KVL: $V_{out} = V_{DD} - I_D R_D$.\n\n### 4. AC Small-Signal Analysis\nLet's analyze the circuit for small AC signals ($v_{in}$, $v_{out}$):\n*   **Gate**: Connected to $V_{DD}$, so $v_g = 0$ (AC ground).\n*   **Source**: Connected to input, so $v_s = v_{in}$.\n*   **Gate-Source Voltage**: $v_{gs} = v_g - v_s = 0 - v_{in} = -v_{in}$.\n*   **Drain Current**: The small-signal drain current generated by the transistor is $i_d = g_m v_{gs} = -g_m v_{in}$. This current flows from Drain to Source. Effectively, a current of $g_m v_{in}$ flows from Source to Drain (into the drain node).\n\n**Output Node (Drain) KCL:**\nThe current $g_m v_{in}$ flows into the drain node from the transistor. This current must flow through the resistor $R_D$ to the AC ground ($V_{DD}$).\n$$v_{out} = (g_m v_{in}) \\cdot R_D$$\n\n**Voltage Gain ($A_v$):**\n$$A_v = \\frac{v_{out}}{v_{in}} = g_m R_D$$\n(If we consider the output resistance of the transistor $r_o$, the gain is $g_m (R_D || r_o)$).\n\n### 5. Circuit Characteristics\n*   **Amplification Type**: Since the gain $A_v = g_m R_D$ is positive, the output voltage is in phase with the input voltage. This is a **non-inverting amplifier**.\n*   **Input Impedance ($Z_{in}$)**: Looking into the source terminal of a common gate amplifier, the impedance is low, approximately **$1/g_m$**.\n*   **Output Impedance ($Z_{out}$)**: Looking into the drain terminal (with $R_D$), the impedance is high, approximately **$R_D$** (or $R_D || r_o$).\n*   **Current Gain**: The current gain is approximately 1 ($i_{out} \\approx i_{in}$), making it a **current buffer**.\n\n### Summary\nThe circuit is an **NMOS Common Gate Amplifier** with a resistive load. It takes the input signal at the source, amplifies it with a gain of roughly $g_m R_D$, and outputs it at the drain. It is a non-inverting amplifier with low input impedance and high output impedance.",
        "format": "markdown",
        "sha256": "99734b2d212095c93977441c30cf85edbf5bd5f5d51d01b8bdd7a0429fbd48b5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven, gate-grounded common-gate stage and gives the non-inverting gain and approximate input resistance. The added bias and current-buffer discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 15294,
        "total_tokens": 16199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 15294,
        "total_tokens": 16199,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14152,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a fundamental electronic circuit consisting of an **N-channel MOSFET ($M_1$)** and a **resistor ($R_D$)** connected to a power supply ($V_{DD}$). This topology is most commonly known as a **Common Source Amplifier** (for analog signals) or an **NMOS Inverter / Resistive Load Inverter** (for digital signals).\n\n*   **$V_{DD}$**: DC Power Supply voltage.\n*   **$R_D$**: Drain resistor (or load resistor). It acts as a pull-up resistor.\n*   **$M_1$**: N-channel MOSFET (NMOS). The arrow on the source terminal pointing inwards indicates it is an NMOS device. The bulk/substrate (right side) is connected to $V_{DD}$, which is standard practice for NMOS to keep the body-diodes reverse-biased (since $V_{Bulk} = V_{DD} \\ge V_{Source}$ and $V_{Bulk} \\ge V_{Drain}$).\n*   **$V_{in}$**: Input voltage. In a standard configuration for this diagram, this is applied to the **Gate** of the transistor (though drawn at the bottom, it controls the channel). The source is typically connected to ground (implied).\n*   **$V_{out}$**: Output voltage, taken at the **Drain** node.\n\n### 2. Circuit Operation (DC Analysis)\nThe behavior of the circuit depends on the input voltage $V_{in}$ (assuming $V_{in}$ is the Gate voltage $V_G$ and the Source is grounded, $V_S=0$). Let $V_{th}$ be the threshold voltage of the MOSFET.\n\nThere are three main regions of operation:\n\n**A. Cutoff Region ($V_{in} < V_{th}$)**\n*   The input voltage is below the threshold voltage.\n*   The transistor $M_1$ is **OFF** (no current flows from Drain to Source, $I_D = 0$).\n*   Since there is no current through $R_D$, there is no voltage drop across it.\n*   **Output:** $V_{out} = V_{DD} - I_D R_D = V_{DD}$. (Logic High)\n\n**B. Saturation Region ($V_{in} > V_{th}$ and $V_{out} \\ge V_{in} - V_{th}$)**\n*   The transistor is **ON** and acts as a current source. This is the region used for **amplification**.\n*   The drain current is given by: $I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_{in} - V_{th})^2 (1 + \\lambda V_{out})$.\n*   The output voltage is: $V_{out} = V_{DD} - I_D R_D$.\n*   **Behavior:** As $V_{in}$ increases, $I_D$ increases, causing a larger voltage drop across $R_D$, so $V_{out}$ **decreases**. This indicates an **inverting** relationship.\n\n**C. Triode (Linear) Region ($V_{in} > V_{th}$ and $V_{out} < V_{in} - V_{th}$)**\n*   The transistor is **ON** and acts like a small resistor (closed switch). This happens when $V_{out}$ is low.\n*   **Output:** $V_{out}$ is close to 0V (Logic Low).\n*   **Behavior:** Used in digital logic as a switch to pull the output low.\n\n### 3. Small-Signal Analysis (AC Amplifier)\nIf the circuit is biased in the saturation region (using a DC bias at $V_{in}$), it acts as a **Common Source Amplifier**.\n\n*   **Voltage Gain ($A_v$):** The small-signal voltage gain is approximately:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx -g_m R_D$$\n    (where $g_m$ is the transconductance of the MOSFET).\n*   **Phase:** The negative sign indicates that the output is **180 degrees out of phase** with the input (Inverting Amplifier). An increase in input voltage leads to a decrease in output voltage.\n*   **Input/Output Impedance:**\n    *   Input impedance is very high (ideally infinite) because the gate of a MOSFET draws no current.\n    *   Output impedance is approximately $R_D$ (in parallel with the transistor's output resistance $r_o$).\n\n### 4. Digital Logic Application (NMOS Inverter)\nIf $V_{in}$ is a digital signal (switching between 0V and $V_{DD}$):\n*   **Input Low ($V_{in} \\approx 0$):** Transistor is OFF $\\rightarrow$ **Output High ($V_{out} \\approx V_{DD}$)**.\n*   **Input High ($V_{in} \\approx V_{DD}$):** Transistor is ON $\\rightarrow$ **Output Low ($V_{out} \\approx 0$)**.\n*   This circuit functions as a **NOT gate (Inverter)**.\n\n### Summary\nThe circuit is an **NMOS Common Source stage**. It functions as an **inverting amplifier** in the analog domain (saturation region) or as a **digital inverter** in the digital domain (switching between cutoff and triode regions). The resistor $R_D$ converts the transistor's current variations into voltage variations at the output.",
        "format": "markdown",
        "sha256": "a6f06c78029a585dc531e118bfac77d212db85053162f8273a08aae2cf27354b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the source-driven common-gate circuit as a common-source stage, assumes the input is at the gate, and consequently gives the wrong gain sign and input impedance.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 18254,
        "total_tokens": 19159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 905,
        "output_tokens": 18254,
        "total_tokens": 19159,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17009,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification and Components\n*   **Transistor ($M_1$)**: The symbol represents an **NMOS transistor**. We can identify this because the arrow on the source terminal (bottom terminal) points outward (away from the channel), which is characteristic of an N-channel device. Alternatively, the arrow on the substrate (if drawn) would point in. Here, the configuration with the source at the bottom (connected to the lowest potential, ground) and drain at the top (connected to $V_{DD}$) confirms it is an NMOS.\n    *   **Drain (D)**: Top terminal, connected to $R_D$.\n    *   **Gate (G)**: Middle terminal, connected to bias voltage $V_b$.\n    *   **Source (S)**: Bottom terminal, connected to ground.\n*   **Resistor ($R_D$)**: Drain resistor, connected between $V_{DD}$ and the Drain.\n*   **Capacitor ($C_1$)**: Coupling capacitor, connecting the input signal $V_{in}$ to the Source of the transistor.\n*   **Voltage Sources**:\n    *   $V_{DD}$: Positive DC supply voltage.\n    *   $V_b$: DC bias voltage for the Gate.\n    *   $V_{in}$: AC input signal source.\n\n### 2. DC Analysis (Bias Point)\nIn DC analysis, capacitors act as open circuits. Therefore, the input signal $V_{in}$ and capacitor $C_1$ are disconnected from the circuit.\n\n*   **Gate Voltage ($V_G$)**: The gate is connected directly to the DC bias source, so $V_G = V_b$.\n*   **Source Voltage ($V_S$)**: The source is connected directly to ground, so $V_S = 0$ V.\n*   **Gate-Source Voltage ($V_{GS}$)**: $V_{GS} = V_G - V_S = V_b - 0 = V_b$.\n*   **Transistor State**:\n    *   If $V_b > V_{th}$ (threshold voltage), the NMOS transistor $M_1$ is turned **ON**.\n    *   Assuming the transistor is in saturation (which is typical for amplifier biasing), the drain current $I_D$ is given by:\n        $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_b - V_{th})^2$$\n        (ignoring channel length modulation for simplicity).\n*   **Output DC Voltage ($V_{out}$)**: The output is taken at the drain.\n    $$V_{out} = V_{DD} - I_D R_D$$\n\n### 3. AC Analysis (Small-Signal)\nIn AC analysis, DC voltage sources ($V_{DD}$ and $V_b$) are treated as AC grounds (0 V). Capacitors with sufficient capacitance are treated as short circuits.\n\n*   **Gate**: Connected to $V_b$ (AC ground), so $v_g = 0$.\n*   **Source**: The source terminal is connected directly to ground. Therefore, the AC voltage at the source is $v_s = 0$.\n*   **Input Connection**: The input signal $v_{in}$ is connected through capacitor $C_1$ (which is a short) to the source node. Since the source node is hard-connected to ground, **the input signal $v_{in}$ is shorted to ground**.\n    *   The voltage at the source remains $v_s = 0$ regardless of $v_{in}$.\n    *   The input source $V_{in}$ simply drives current through $C_1$ to ground. The impedance seen by $V_{in}$ is just the capacitive reactance $1/(j\\omega C_1)$.\n\n*   **Transistor Operation**:\n    *   The small-signal gate-source voltage is $v_{gs} = v_g - v_s = 0 - 0 = 0$.\n    *   The dependent current source in the small-signal model is $g_m v_{gs} = 0$.\n    *   Therefore, there is no AC current flowing through the transistor due to the input signal.\n\n*   **Output Voltage ($v_{out}$)**:\n    $$v_{out} = - (g_m v_{gs}) (R_D || r_o) = 0$$\n\n### 4. Conclusion and Likely Intended Circuit\n**As drawn, this circuit does not function as an amplifier.** The input signal $V_{in}$ is shorted to ground by the direct connection from the source to ground. Consequently, $v_{out} = 0$ (no AC output).\n\n**Likely Intended Configurations:**\nThe schematic contains a drawing error. It likely intends to represent one of two standard amplifier configurations:\n\n1.  **Common-Gate Amplifier (Most likely based on topology):**\n    *   **Intended Setup**: Input at Source, Gate at AC ground ($V_b$), Output at Drain.\n    *   **Correction**: The wire connecting the Source to Ground should be removed. The input $V_{in}$ should be coupled to the Source, and the Source should not be hard-grounded (or the ground is only for DC bias, but here it's a direct short). If we assume the ground at the source is removed and $V_{in}$ is applied directly:\n    *   $v_s = v_{in}$, $v_g = 0 \\Rightarrow v_{gs} = -v_{in}$.\n    *   $v_{out} = g_m R_D v_{in}$.\n    *   **Gain**: $A_v = g_m R_D$ (Non-inverting, positive gain).\n    *   **Input Impedance**: Low ($\\approx 1/g_m$).\n\n2.  **Common-Source Amplifier:**\n    *   **Intended Setup**: Input at Gate, Source grounded, Output at Drain.\n    *   **Correction**: The input $V_{in}$ and $C_1$ should be connected to the Gate (replacing or paralleling $V_b$), and the connection to the source should remain grounded.\n    *   $v_{gs} = v_{in}$.\n    *   $v_{out} = -g_m R_D v_{in}$.\n    *   **Gain**: $A_v = -g_m R_D$ (Inverting, high gain).\n    *   **Input Impedance**: High (ideally infinite).\n\nGiven the labels ($V_{in}$ at source, $V_b$ at gate), the diagram is structurally attempting to draw a **Common-Gate amplifier**, but the accidental ground connection at the source node renders it non-functional.",
        "format": "markdown",
        "sha256": "dffca154a2a46c8595fce3c5a0fc0582963560b65eba774aa988a8a2493d6810"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer notices that the source node is hard-shorted to ground, so the input is shunted and the ideal small-signal output is zero. This satisfies the full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1456,
        "output_tokens": 12142,
        "total_tokens": 13598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1456,
        "output_tokens": 12142,
        "total_tokens": 13598,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit consists of an **NMOS transistor ($M_1$)**, a drain resistor ($R_D$), a coupling capacitor ($C_1$), a DC bias voltage ($V_b$), and a power supply ($V_{DD}$).\n*   **Transistor $M_1$**: The arrow on the source terminal points outward, identifying it as an **NMOS** transistor.\n*   **Connections**:\n    *   **Drain**: Connected to $V_{DD}$ through $R_D$ and the output node $V_{out}$.\n    *   **Gate**: Connected to a DC bias voltage $V_b$.\n    *   **Source**: Connected to a node that is linked to both the input capacitor $C_1$ and ground.\n\n### 2. DC Analysis (Bias Point)\nIn DC analysis, capacitors act as open circuits. Therefore, the input source $V_{in}$ and capacitor $C_1$ are disconnected from the circuit.\n*   **Gate Voltage ($V_G$)**: The gate is connected directly to the bias voltage, so $V_G = V_b$.\n*   **Source Voltage ($V_S$)**: The source is connected directly to ground, so $V_S = 0$ V.\n*   **Gate-Source Voltage ($V_{GS}$)**: $V_{GS} = V_G - V_S = V_b - 0 = V_b$.\n\n**Operating Region**:\nAssuming $V_b$ is set such that $V_b > V_{th}$ (threshold voltage), the transistor $M_1$ is turned ON.\nThe drain current $I_D$ is determined by the transistor's characteristics (assuming saturation region):\n$$I_D = \\frac{1}{2} \\mu_n C_{ox} \\frac{W}{L} (V_b - V_{th})^2$$\nThe DC output voltage at the drain is:\n$$V_{out, DC} = V_{DD} - I_D R_D$$\n\n### 3. AC Analysis (Small Signal)\nIn AC analysis, DC voltage sources ($V_{DD}$, $V_b$) are treated as AC grounds (short circuits to ground). Capacitors with sufficient capacitance act as short circuits.\n\n*   **Gate**: Connected to AC ground (since $V_b$ is a DC source). So, $v_g = 0$.\n*   **Source**: The schematic shows a direct connection from the source node to ground. Therefore, the source is at AC ground. So, $v_s = 0$.\n*   **Input**: The input signal $v_{in}$ is connected through the shorted capacitor $C_1$ to the source node. Since the source node is hard-wired to ground ($v_s = 0$), the input signal $v_{in}$ is effectively **shorted to ground**.\n\n**Gain Calculation**:\nThe small-signal gate-source voltage is:\n$$v_{gs} = v_g - v_s = 0 - 0 = 0$$\n\nThe output voltage is determined by the current from the transistor:\n$$v_{out} = -g_m v_{gs} R_D$$\nSince $v_{gs} = 0$, then **$v_{out} = 0$**.\n\n**Voltage Gain ($A_v$)**:\n$$A_v = \\frac{v_{out}}{v_{in}} = 0$$\n\n### 4. Conclusion and Intended Circuit\n**As drawn, this circuit is non-functional as an amplifier.** The input signal $V_{in}$ is shorted to ground by the direct connection of the transistor's source terminal to ground. No AC signal can modulate the transistor's current.\n\n**Likely Intended Circuit: Common Gate Amplifier**\nThe topology suggests this was intended to be a **Common Gate (CG) amplifier**. In a functional Common Gate amplifier:\n1.  The input is applied to the **Source**.\n2.  The **Gate** is at AC ground (biased by $V_b$).\n3.  The output is taken from the **Drain**.\n\n**How to fix the schematic:**\nTo make this a working Common Gate amplifier, the direct ground connection at the source terminal should be removed and replaced with a source resistor ($R_S$) or an impedance. The input $V_{in}$ (via $C_1$) would then be applied to the source node (between $C_1$ and $R_S$).\n\n*   **Function**: It would act as a non-inverting amplifier.\n*   **Gain**: Approximately $A_v \\approx g_m R_D$ (for high load impedance).\n*   **Input Impedance**: Low, approximately $1/g_m$.\n\n**Alternative Intended Circuit: Common Source Amplifier**\nIf the intention was a standard **Common Source (CS) amplifier**:\n*   The input $V_{in}$ and $C_1$ should be connected to the **Gate** (replacing or adding to $V_b$).\n*   The Source should remain grounded (as drawn).\n*   **Function**: Inverting amplifier with gain $A_v = -g_m R_D$.",
        "format": "markdown",
        "sha256": "11299cadc9cfa2134fdbf8163a219fe734c06df7f8c7d9160f1fc8fb9b02aa14"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Recognizes that the source is hard-shorted to ground, so the input cannot create a small-signal source voltage and the ideal gain is zero. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1456,
        "output_tokens": 9063,
        "total_tokens": 10519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1456,
        "output_tokens": 9063,
        "total_tokens": 10519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification and Components\nThe circuit is a MOSFET amplifier configuration.\n*   **$M_1$**: An N-channel MOSFET (NMOS). The arrow on the source terminal points outward (or indicates the bulk direction), and the source is at the lower potential (ground), drain at the higher potential ($V_{DD}$), confirming it's an NMOS.\n*   **$R_D$**: Drain resistor, connected to the power supply $V_{DD}$.\n*   **$V_b$**: DC bias voltage applied to the gate.\n*   **$V_{out}$**: Output voltage taken at the drain.\n*   **$V_{in}$**: Input AC voltage source.\n*   **$C_1$**: Coupling capacitor.\n\n### 2. DC Analysis (Bias Point)\nIn DC analysis, capacitors act as open circuits.\n*   The gate voltage is fixed at $V_G = V_b$.\n*   The source is connected directly to ground, so $V_S = 0$ V.\n*   The gate-source voltage is $V_{GS} = V_G - V_S = V_b$.\n*   Assuming $V_b > V_{th}$ (threshold voltage), the transistor $M_1$ is turned ON.\n*   The drain current $I_D$ is determined by the transistor parameters and $V_{GS}$. Assuming saturation region:\n    $$I_D = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right) (V_b - V_{th})^2$$\n*   The DC output voltage at the drain is:\n    $$V_{out, DC} = V_{DD} - I_D R_D$$\n\n### 3. AC Analysis (Small-Signal)\nIn AC analysis, DC voltage sources ($V_{DD}$ and $V_b$) are treated as AC grounds (0 V).\n*   **Gate**: Connected to $V_b$ (AC ground), so $v_g = 0$.\n*   **Source**: Connected directly to ground, so $v_s = 0$.\n*   **Input**: The input signal $V_{in}$ is connected through capacitor $C_1$ to the source node. Since the source node is hard-connected to ground, the input signal $V_{in}$ is effectively shorted to ground through $C_1$. The voltage at the source node remains $v_s = 0$.\n\n**Small-Signal Model:**\n*   The small-signal gate-source voltage is $v_{gs} = v_g - v_s = 0 - 0 = 0$.\n*   The dependent current source in the MOSFET model is $g_m v_{gs}$. Since $v_{gs} = 0$, the current source is $0$ A (open circuit).\n*   Consequently, there is no AC signal variation in the drain current.\n*   The output AC voltage $v_{out} = 0$.\n\n**Conclusion for the drawn circuit:** As drawn, **this circuit does not amplify the input signal**. The input $V_{in}$ is shorted to ground by the direct connection at the source node, and the transistor operates as a constant current source (biased by $V_b$) with no AC response.\n\n### 4. Likely Intended Circuit (Correction)\nThe diagram appears to contain a schematic error. It resembles two standard amplifier configurations, but is drawn incorrectly for both.\n\n**Possibility A: Common Gate Amplifier**\n*   **Topology:** Input at Source, Output at Drain, Gate at AC Ground.\n*   **Intended Diagram:** The source should **not** be directly grounded. Instead, there should be a resistor $R_S$ from the source to ground. The input $V_{in}$ (via $C_1$) should be connected to the top of $R_S$.\n*   **Function:** This is a **Common Gate Amplifier**.\n    *   **Voltage Gain:** $A_v \\approx g_m R_D$ (Non-inverting).\n    *   **Input Impedance:** $Z_{in} \\approx 1/g_m$ (Low).\n    *   **Output Impedance:** $Z_{out} \\approx R_D$.\n\n**Possibility B: Common Source Amplifier**\n*   **Topology:** Input at Gate, Output at Drain, Source at Ground.\n*   **Intended Diagram:** The input $V_{in}$ (via a capacitor) should be connected to the **Gate** (replacing or adding to $V_b$), and the source should remain grounded.\n*   **Function:** This is a **Common Source Amplifier**.\n    *   **Voltage Gain:** $A_v = -g_m (R_D || r_o)$ (Inverting).\n    *   **Input Impedance:** Very high (ideally infinite).\n    *   **Output Impedance:** $R_D$.\n\n**Summary:** The circuit as drawn is a biased NMOS transistor with a grounded source. The input signal is shorted to ground, resulting in zero gain. It is likely a diagram for a **Common Gate amplifier** where the source bias resistor $R_S$ is missing, or a **Common Source amplifier** where the input is drawn at the wrong terminal.",
        "format": "markdown",
        "sha256": "1606d14c686fc3d698c38ee0fd7c8bc561d29845f3c6d568d993687993a5522f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly notices that the source node is hard-shorted to ground, so the input produces no source-voltage variation and the ideal small-signal gain is zero. The additional discussion of possible intended circuits does not undermine the conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1456,
        "output_tokens": 12236,
        "total_tokens": 13692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1456,
        "output_tokens": 12236,
        "total_tokens": 13692,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis:\n\n1.  **Identify the circuit configuration**: The circuit is a common-source amplifier (since the source of transistor $M_1$ is connected to ground). The input signal $V_{in}$ is applied through a resistor $R_S$ (acting as a source resistance $R_{sig}$) to the gate. The output $V_{out}$ is taken at the drain.\n\n2.  **Identify energy storage elements (capacitors)**:\n    *   $C_{GS}$: Gate-to-source capacitance. Connected between the gate node and ground.\n    *   $C_{GD}$: Gate-to-drain capacitance. Connected between the gate node and the drain node. This is a feedback capacitor.\n    *   $C_{DB}$: Drain-to-body capacitance. Connected between the drain node and ground (since the body is typically grounded).\n    *   $C_{SB}$: Source-to-body capacitance. Connected between the source node and ground. Since the source node is directly connected to ground (AC ground), this capacitor is shorted out and does not affect the circuit's dynamics.\n\n3.  **Determine the order of the system**:\n    The circuit has two main nodes with non-zero, time-varying voltages (excluding the grounded source and $V_{DD}$):\n    *   The **Gate node** (voltage $V_g$).\n    *   The **Drain node** (voltage $V_{out}$).\n\n    We can write Kirchhoff's Current Law (KCL) equations for these two nodes in the s-domain (Laplace domain):\n    *   **At the Gate node**: $\\frac{V_{in} - V_g}{R_S} = V_g s C_{GS} + (V_g - V_{out}) s C_{GD}$\n    *   **At the Drain node**: $\\frac{V_{out}}{R_D} + (V_{out} - V_g) s C_{GD} + V_{out} s C_{DB} + g_m V_g = 0$ (assuming the dependent current source $g_m V_{gs}$ flows from drain to source, and $V_{gs} = V_g$).\n\n    This system of two linear equations with two variables ($V_g$ and $V_{out}$) results in a transfer function $H(s) = \\frac{V_{out}}{V_{in}}$ that is a ratio of polynomials in $s$. The denominator of this transfer function (the characteristic equation) will be a quadratic polynomial (degree 2) in $s$.\n\n    The characteristic equation is of the form $a s^2 + b s + c = 0$. The roots of this equation are the poles of the system. Since it is a second-degree polynomial, there are **2 poles**.\n\n    Physically, these correspond to:\n    *   An input pole associated with the input time constant (involving $R_S$, $C_{GS}$, and the Miller-multiplied $C_{GD}$).\n    *   An output pole associated with the output time constant (involving $R_D$, $C_{DB}$, and the Miller effect on $C_{GD}$).\n\nTherefore, the circuit has **2** poles.\n\n**Answer:** 2",
        "format": "markdown",
        "sha256": "f7a6597b4a70d79684483b368657ace6f14fe8a88c70b106b149c1498dfa158c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: C_SB is shorted because its terminals are grounded, while the gate and drain KCL equations yield a second-order denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1572,
        "output_tokens": 5287,
        "total_tokens": 6859,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1572,
        "output_tokens": 5287,
        "total_tokens": 6859,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4571,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the step-by-step determination of the number of poles:\n\n1.  **Identify the Circuit Configuration:** The circuit is a common-source amplifier. The input signal $V_{in}$ is applied to the gate of the MOSFET $M_1$ through a resistor $R_S$ (which acts as a source resistance). The output $V_{out}$ is taken from the drain. The source of the MOSFET is connected directly to ground.\n\n2.  **Identify Energy Storage Elements (Capacitors):** The circuit contains several parasitic and explicit capacitors:\n    *   $C_{GS}$: Gate-to-Source capacitance.\n    *   $C_{GD}$: Gate-to-Drain capacitance.\n    *   $C_{DB}$: Drain-to-Body capacitance.\n    *   $C_{SB}$: Source-to-Body capacitance.\n\n3.  **Analyze Node Voltages and Capacitor Effects:**\n    *   **Source Node:** The source of $M_1$ is connected to ground. Therefore, the source voltage $V_S = 0$ (AC ground). Consequently, the capacitor $C_{SB}$ is connected between the source (ground) and the body (which is also typically at ground potential in such models, indicated by the ground symbols). Even if the body is not ground, since the source is grounded, $C_{SB}$ is effectively in parallel with a short circuit or just a capacitance to ground from ground, so it does not create an independent state variable. It can be ignored for the pole count.\n    *   **Gate Node ($V_G$):** This is an independent node. Capacitances connected here are $C_{GS}$ (to ground) and $C_{GD}$ (to the drain node). The resistor $R_S$ connects this node to the input.\n    *   **Drain Node ($V_D = V_{out}$):** This is another independent node. Capacitances connected here are $C_{DB}$ (to ground) and $C_{GD}$ (to the gate node). The resistor $R_D$ connects this node to $V_{DD}$ (AC ground).\n\n4.  **Determine the Order of the System:**\n    To find the number of poles, we look at the number of independent energy storage nodes or the order of the transfer function $H(s) = V_{out}(s)/V_{in}(s)$.\n    We can write Kirchhoff's Current Law (KCL) equations for the two main nodes (Gate and Drain):\n    *   **At the Gate node:** The currents through $R_S$, $C_{GS}$, and $C_{GD}$ sum to zero. This gives an equation involving $V_{in}$, $V_G$, and $V_D$.\n    *   **At the Drain node:** The currents through $R_D$, the dependent current source $g_m V_{GS}$, $C_{GD}$, and $C_{DB}$ sum to zero. This gives an equation involving $V_G$ and $V_D$.\n\n    Since there are two independent nodes with capacitance (Gate and Drain) that are coupled, the system is described by a set of two first-order differential equations, which results in a second-order transfer function. The denominator of the transfer function will be a quadratic polynomial in $s$ (i.e., $as^2 + bs + c = 0$).\n\n    The characteristic equation determinant is:\n    $$ \\Delta(s) = \\left[ \\frac{1}{R_S} + s(C_{GS} + C_{GD}) \\right] \\left[ \\frac{1}{R_D} + s(C_{GD} + C_{DB}) \\right] - (-sC_{GD})(g_m - sC_{GD}) $$\n    Expanding this, the highest power of $s$ is $s^2$. Specifically, the $s^2$ term is $s^2[(C_{GS} + C_{GD})(C_{GD} + C_{DB}) - C_{GD}^2] = s^2[C_{GS}C_{GD} + C_{GS}C_{DB} + C_{GD}C_{DB}]$. Since this coefficient is non-zero, the system is second-order.\n\nA second-order system has **2 poles**.\n\n**Answer:** The circuit has **2** poles.",
        "format": "markdown",
        "sha256": "dcd7e028152c8438036c4e70cd6a4f2ce93951ed9e7397999b1e89796a70f001"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes there are two poles and accounts for the capacitors: CSB is shorted because source and body are grounded, while the gate and drain dynamics yield a second-order denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1572,
        "output_tokens": 5628,
        "total_tokens": 7200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1572,
        "output_tokens": 5628,
        "total_tokens": 7200,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis:\n\n1.  **Identify Energy Storage Elements:** The circuit contains several capacitors: $C_{GS}$, $C_{GD}$, $C_{DB}$, and $C_{SB}$.\n    *   $C_{GS}$ is the gate-to-source capacitance.\n    *   $C_{GD}$ is the gate-to-drain capacitance.\n    *   $C_{DB}$ is the drain-to-bulk capacitance.\n    *   $C_{SB}$ is the source-to-bulk capacitance.\n\n2.  **Analyze Connections:**\n    *   The source terminal of the MOSFET $M_1$ is connected directly to ground.\n    *   The capacitor $C_{SB}$ is connected between the source node and ground. Since the source is already at ground potential, $C_{SB}$ is short-circuited and does not affect the circuit's dynamics (it has no voltage across it). Thus, we can ignore $C_{SB}$.\n    *   The remaining active capacitors are $C_{GS}$, $C_{GD}$, and $C_{DB}$.\n\n3.  **Determine Independent Nodes:**\n    *   The circuit has two main nodes with capacitance to ground or between nodes: the **Gate node** (input) and the **Drain node** (output).\n    *   Let $V_g$ be the voltage at the gate and $V_d$ be the voltage at the drain ($V_{out}$).\n    *   The capacitor $C_{GS}$ is connected between Gate and Ground.\n    *   The capacitor $C_{DB}$ is connected between Drain and Ground (Bulk is ground).\n    *   The capacitor $C_{GD}$ is connected between Gate and Drain.\n\n4.  **Count Poles:**\n    *   The number of poles in a circuit is generally equal to the number of independent energy storage elements (or the order of the system).\n    *   We can write nodal equations for the two nodes (Gate and Drain).\n    *   **KCL at Gate:** $\\frac{V_{in} - V_g}{R_S} = V_g s C_{GS} + (V_g - V_d) s C_{GD}$\n    *   **KCL at Drain:** $\\frac{V_d}{R_D} + g_m V_g + (V_d - V_g) s C_{GD} + V_d s C_{DB} = 0$ (assuming current source $g_m V_{gs}$ flows from drain to source).\n    *   This system of two equations involves two variables ($V_g$ and $V_d$). Solving for the transfer function $V_{out}/V_{in} = V_d/V_{in}$ will result in a rational function where the denominator is a polynomial of degree 2 in $s$.\n    *   The determinant of the coefficient matrix will be a quadratic equation in $s$ (i.e., $as^2 + bs + c$).\n\nTherefore, the circuit has **2** poles. These poles correspond to the input node (gate) and the output node (drain), coupled by the feedback capacitor $C_{GD}$ (Miller effect).\n\n**Answer:** 2",
        "format": "markdown",
        "sha256": "ff99e2b1963233be9b81f546704d60edcfc6d0adb198ce1d0be684d79ff2482a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that CSB is shorted out, accounts for the remaining coupled capacitors, and derives a second-order denominator, establishing two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1572,
        "output_tokens": 4553,
        "total_tokens": 6125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1572,
        "output_tokens": 4553,
        "total_tokens": 6125,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3850,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\n*   **Transistor ($M_1$)**: The symbol represents a MOSFET. Given the connection to $V_{DD}$ at the top through a resistor $R_D$, and the typical convention for such amplifier circuits, $M_1$ is an **NMOS transistor**.\n    *   **Drain (D)**: Top terminal, connected to $R_D$ and $V_{out}$.\n    *   **Source (S)**: Bottom terminal, connected to $V_{in}$. (Note: The arrow on the symbol points inwards, which is the standard symbol for the substrate/body of an NMOS, or indicates a PMOS if on the source. However, given $V_{DD}$ at the top and $R_D$ as a load, this is functionally an NMOS Common-Gate configuration).\n    *   **Gate (G)**: Connected to the feedback network at voltage $V_F$.\n*   **Resistors**:\n    *   $R_D$: Drain resistor (load resistor), connected to $V_{DD}$.\n    *   $R_1, R_2$: Feedback resistors forming a voltage divider.\n\n### 2. Amplifier Configuration\n*   **Input**: The input signal $V_{in}$ is applied to the **Source** terminal.\n*   **Output**: The output signal $V_{out}$ is taken from the **Drain** terminal.\n*   **Gate**: The gate is connected to a feedback voltage $V_F$.\n*   **Basic Topology**: An amplifier with input at the source and output at the drain is a **Common-Gate (CG)** amplifier configuration.\n\n### 3. Feedback Analysis\nThe circuit includes a feedback network consisting of resistors $R_1$ and $R_2$.\n*   **Sampling**: The feedback network ($R_1, R_2$) is connected in parallel with the output node ($V_{out}$). Therefore, it samples the **output voltage**. This is **Voltage Sampling** (or Shunt sampling at the output).\n*   **Mixing**: The feedback voltage $V_F$ is applied to the gate, while the input $V_{in}$ is at the source. The effective input voltage to the transistor is the gate-source voltage, $V_{gs} = V_{gate} - V_{source} = V_F - V_{in}$. The feedback signal is in series with the input signal. This is **Series Mixing**.\n*   **Type**: This is a **Voltage-Series Negative Feedback** amplifier (also known as **Series-Shunt Feedback**).\n\n**Polarity Check (Negative Feedback):**\n1.  If $V_{in}$ (Source voltage) increases $\\rightarrow$ $V_{gs}$ ($V_g - V_s$) decreases (assuming $V_g$ is constant).\n2.  Decreased $V_{gs}$ leads to a decrease in drain current $I_d$.\n3.  Decreased $I_d$ means a smaller voltage drop across $R_D$, so $V_{out}$ ($V_{DD} - I_d R_D$) **increases**.\n4.  Increased $V_{out}$ causes an increase in the feedback voltage $V_F$ (via the divider $R_1, R_2$).\n5.  Increased $V_F$ (Gate voltage) increases $V_{gs}$, which opposes the initial change.\n6.  Therefore, the feedback is **Negative**.\n\n### 4. Circuit Function and Gain\nThis circuit acts as a **Non-Inverting Amplifier**.\n\n*   **Feedback Factor ($\\beta$)**: The voltage divider sets the feedback voltage $V_F$.\n    $$V_F = V_{out} \\cdot \\frac{R_2}{R_1 + R_2}$$\n    So, $\\beta = \\frac{R_2}{R_1 + R_2}$.\n\n*   **Closed-Loop Gain ($A_{vf}$)**:\n    In a negative feedback amplifier with high loop gain, the system tries to make the error voltage ($V_{in} - V_F$) very small. Effectively, $V_{in} \\approx V_F$.\n    $$V_{in} \\approx V_{out} \\cdot \\frac{R_2}{R_1 + R_2}$$\n    $$\\frac{V_{out}}{V_{in}} \\approx \\frac{R_1 + R_2}{R_2} = 1 + \\frac{R_1}{R_2}$$\n\n    **Exact Gain Derivation**:\n    Using small-signal analysis ($g_m$ is transconductance):\n    $$A_{vf} = \\frac{g_m R_D (R_1 + R_2)}{R_1 + R_2 + R_D + g_m R_2 R_D}$$\n    Assuming $g_m R_2 R_D \\gg (R_1 + R_2 + R_D)$, the gain simplifies to:\n    $$A_{vf} \\approx 1 + \\frac{R_1}{R_2}$$\n\n### 5. Key Characteristics\n*   **Gain**: The gain is determined by the resistor ratio $R_1/R_2$ and is stable, independent of the transistor's transconductance ($g_m$) or temperature variations.\n*   **Phase**: The output is **in-phase** with the input (Non-inverting). This is characteristic of a Common-Gate amplifier with this feedback topology.\n*   **Input Impedance**: A basic Common-Gate amplifier has low input impedance ($\\approx 1/g_m$). The series feedback **increases the input impedance**.\n*   **Output Impedance**: The voltage sampling (shunt output) **decreases the output impedance**, making it act more like an ideal voltage source.\n*   **Bandwidth**: The feedback increases the bandwidth of the amplifier (Gain-Bandwidth product is constant).\n\n**Summary**: The circuit is a **Common-Gate MOSFET amplifier with Voltage-Series Negative Feedback**, functioning as a stable **non-inverting voltage amplifier** with a gain of approximately $1 + R_1/R_2$.",
        "format": "markdown",
        "sha256": "4336a0cb6a3298cfdeddb7feedd2566d5821655fe082e283eaa08434b5590a9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven input, output-divider feedback to the gate, and negative feedback. Its exact gain is equivalent to the golden expression, with the expected non-inverting high-loop-gain limit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1341,
        "output_tokens": 12613,
        "total_tokens": 13954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1341,
        "output_tokens": 12613,
        "total_tokens": 13954,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification and Components\n*   **Transistor ($M_1$):** The symbol represents an **NMOS transistor** (N-channel MOSFET). The arrow on the source terminal points inward (towards the channel), which is the standard convention for an NMOS device (indicating the P-N junction from the P-substrate to the N-channel).\n    *   **Drain:** Connected to the top node (via $R_D$).\n    *   **Source:** Connected to the input $V_{in}$.\n    *   **Gate:** Connected to the feedback node $V_F$.\n*   **Resistors:**\n    *   **$R_D$:** Drain resistor, connected to the supply $V_{DD}$. It sets the load for the drain current and develops the output voltage.\n    *   **$R_1$ and $R_2$:** Form a voltage divider network connected between the output $V_{out}$ and ground. This is the **feedback network**.\n*   **Voltages:**\n    *   **$V_{DD}$:** Positive DC supply voltage.\n    *   **$V_{in}$:** Input signal applied to the Source of $M_1$.\n    *   **$V_{out}$:** Output signal taken from the Drain of $M_1$.\n    *   **$V_F$:** Feedback voltage at the Gate of $M_1$, determined by the divider $R_1, R_2$.\n\n### 2. Circuit Topology\nThis circuit is a **Common-Gate amplifier** configuration (input at Source, output at Drain) with **resistive negative feedback**.\n\n*   **Input Stage:** The input signal $V_{in}$ is applied to the source terminal of the MOSFET.\n*   **Output Stage:** The output signal $V_{out}$ is taken from the drain terminal.\n*   **Feedback Path:** A portion of the output voltage $V_{out}$ is sampled by the voltage divider formed by $R_1$ and $R_2$ and fed back to the gate terminal ($V_F$).\n\n### 3. Feedback Analysis\nWe can determine the type and polarity of the feedback by analyzing the signal loop:\n\n1.  **Sampling (Output side):** The feedback network ($R_1, R_2$) is connected in parallel with the output (from $V_{out}$ to ground). This samples the **output voltage**. So, it is **Voltage Sampling** (or Shunt sampling at the output).\n2.  **Mixing (Input side):** The feedback voltage $V_F$ is applied to the gate, and the input $V_{in}$ is at the source. The effective input voltage controlling the transistor is the gate-source voltage:\n    $$V_{GS} = V_G - V_S = V_F - V_{in}$$\n    Since the feedback voltage $V_F$ and input voltage $V_{in}$ are in series (they subtract to form $V_{GS}$), this is **Series Mixing** (or Series input).\n3.  **Polarity (Negative Feedback):** Let's trace a positive change in input ($\\Delta V_{in} > 0$):\n    *   $V_{in}$ (Source voltage) increases.\n    *   $V_{GS} = V_F - V_{in}$ decreases (assuming $V_F$ is initially constant).\n    *   Drain current $I_D$ decreases (since $I_D \\propto V_{GS}^2$ for NMOS in saturation).\n    *   Voltage drop across $R_D$ ($I_D R_D$) decreases.\n    *   Output voltage $V_{out} = V_{DD} - I_D R_D$ **increases**.\n    *   The increased $V_{out}$ causes $V_F$ (Gate voltage) to increase via the divider ($V_F = V_{out} \\frac{R_2}{R_1+R_2}$).\n    *   The increased $V_F$ tends to increase $V_{GS}$, which opposes the initial decrease in $V_{GS}$.\n    *   Therefore, this is **Negative Feedback**.\n\n**Conclusion:** This is a **Voltage-Series Negative Feedback** circuit (also known as Series-Shunt feedback).\n\n### 4. Circuit Function and Gain\nBecause of the negative feedback, the circuit acts as a **non-inverting amplifier**. The feedback forces the gate voltage $V_F$ to track the source voltage $V_{in}$ to maintain a roughly constant $V_{GS}$ (specifically, in the ideal high-gain limit, $V_{GS} \\approx 0$, so $V_F \\approx V_{in}$).\n\n**Deriving the Gain:**\nThe feedback voltage is:\n$$V_F = V_{out} \\cdot \\frac{R_2}{R_1 + R_2}$$\n\nFor the amplifier to be stable with high loop gain, the feedback voltage $V_F$ will closely follow the input voltage $V_{in}$ (virtual short concept, similar to an op-amp non-inverting configuration):\n$$V_F \\approx V_{in}$$\n\nSubstituting the expression for $V_F$:\n$$V_{out} \\cdot \\frac{R_2}{R_1 + R_2} \\approx V_{in}$$\n\nSolving for the voltage gain $A_v = \\frac{V_{out}}{V_{in}}$:\n$$A_v \\approx \\frac{R_1 + R_2}{R_2} = 1 + \\frac{R_1}{R_2}$$\n\n### 5. Summary of Characteristics\n*   **Amplifier Type:** Non-inverting amplifier.\n*   **Gain:** Approximately $1 + \\frac{R_1}{R_2}$. The gain is determined by the passive resistors $R_1$ and $R_2$, making it stable and independent of the transistor's parameters (like $g_m$ or $V_{th}$).\n*   **Input Impedance:** The input is at the source. Series feedback generally increases input impedance. The input impedance will be higher than that of a simple common-gate amplifier ($1/g_m$).\n*   **Output Impedance:** Voltage sampling (shunt feedback at output) decreases the output impedance, making the circuit a better voltage source (stiffer output).\n*   **Bandwidth:** Negative feedback typically extends the bandwidth of the amplifier.\n\nIn essence, this circuit is a single-transistor implementation of a **non-inverting amplifier** with a gain set by the ratio of the feedback resistors.",
        "format": "markdown",
        "sha256": "1ed6350f43f8dc78832bc7339658a34b2173c0786e5cf2435953ca11ff21fe22"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback; it also gives the correct high-loop-gain non-inverting gain, approximately 1 + R1/R2.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1341,
        "output_tokens": 9808,
        "total_tokens": 11149,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1341,
        "output_tokens": 9808,
        "total_tokens": 11149,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit's topology, operation, and characteristics.\n\n### 1. Circuit Identification and Topology\nThe circuit consists of an N-channel MOSFET ($M_1$) with a resistive load ($R_D$) and a feedback network ($R_1, R_2$).\n*   **Input ($V_{in}$)**: Applied to the **Source** terminal of the MOSFET.\n*   **Output ($V_{out}$)**: Taken from the **Drain** terminal of the MOSFET.\n*   **Gate ($V_F$)**: Connected to a voltage divider formed by $R_1$ and $R_2$, which samples the output voltage.\n\nThis configuration is fundamentally a **Common-Gate amplifier** (since the input is at the source and output is at the drain) with **negative feedback**. Specifically, it is a **Voltage-Series (or Series-Shunt) feedback** amplifier. It functions effectively as a **non-inverting voltage amplifier**.\n\n### 2. Component Roles\n*   **$M_1$ (NMOS Transistor)**: The active amplifying element. It converts the input voltage at the source into a current.\n*   **$R_D$ (Drain Resistor)**: Converts the drain current into a voltage at the output node. It acts as the load for the amplifier.\n*   **$R_1$ and $R_2$ (Feedback Network)**: These resistors form a voltage divider that feeds a portion of the output voltage ($V_{out}$) back to the gate ($V_F$).\n    *   The feedback voltage is $V_F = V_{out} \\cdot \\frac{R_2}{R_1 + R_2}$. Let $\\beta = \\frac{R_2}{R_1 + R_2}$. So, $V_F = \\beta V_{out}$.\n\n### 3. DC Analysis (Biasing)\nThe circuit uses feedback to establish a DC operating point.\n*   Since the gate current of a MOSFET is zero ($I_G = 0$), the resistors $R_1$ and $R_2$ form a simple voltage divider from $V_{out}$ to ground.\n*   The gate voltage is $V_G = V_F = V_{out} \\frac{R_2}{R_1 + R_2}$.\n*   The gate-source voltage is $V_{GS} = V_G - V_S = V_F - V_{in}$.\n*   For the transistor to be in saturation (active region), we need $V_{GS} > V_{th}$ (threshold voltage) and $V_{DS} > V_{GS} - V_{th}$. The feedback loop helps stabilize this operating point. If $V_{out}$ drifts, $V_F$ changes, adjusting $V_{GS}$ to correct the drain current and thus $V_{out}$.\n\n### 4. Small-Signal (AC) Analysis\nLet's analyze the gain and behavior using small-signal parameters ($g_m$ for transconductance).\n\n*   **Input-Output Relationship**:\n    The gate-source voltage is $v_{gs} = v_g - v_s = v_f - v_{in}$.\n    Substituting the feedback equation $v_f = \\beta v_{out}$:\n    $$v_{gs} = \\beta v_{out} - v_{in}$$\n\n*   **Output Node Equation (KCL at Drain)**:\n    The total current leaving the drain node through the resistors and the transistor channel must sum to zero (assuming no external load). The effective load resistance at the drain is $R_{load} = R_D \\parallel (R_1 + R_2)$. Let $G_{total} = \\frac{1}{R_D} + \\frac{1}{R_1 + R_2}$.\n    The current from the dependent source is $g_m v_{gs}$ flowing from Drain to Source.\n    $$v_{out} \\cdot G_{total} + g_m v_{gs} = 0$$\n    $$v_{out} \\cdot G_{total} + g_m (\\beta v_{out} - v_{in}) = 0$$\n    $$v_{out} (G_{total} + g_m \\beta) = g_m v_{in}$$\n\n*   **Voltage Gain ($A_v$)**:\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m}{G_{total} + g_m \\beta} = \\frac{1}{\\frac{G_{total}}{g_m} + \\beta}$$\n\n    **Approximation**: If the loop gain ($g_m / G_{total}$) is very large (i.e., $g_m \\gg G_{total}$), the term $\\frac{G_{total}}{g_m}$ becomes negligible.\n    $$A_v \\approx \\frac{1}{\\beta} = \\frac{R_1 + R_2}{R_2} = 1 + \\frac{R_1}{R_2}$$\n\n    This is the standard gain formula for a **non-inverting amplifier**. The circuit is non-inverting because an increase in $V_{in}$ (source) decreases $V_{GS}$, reducing drain current, which increases $V_{out}$ (drain voltage).\n\n### 5. Feedback Effects\nThis circuit employs **Negative Voltage-Series Feedback**. Here is how it affects the circuit properties:\n\n1.  **Gain Stabilization**: The closed-loop gain depends primarily on the resistor ratio $R_1/R_2$ rather than the transistor's transconductance $g_m$ (which varies with temperature and manufacturing). This makes the gain very stable and predictable ($A_v \\approx 1 + R_1/R_2$).\n2.  **Input Impedance ($Z_{in}$)**:\n    *   Without feedback, a common-gate amplifier has a low input impedance ($\\approx 1/g_m$).\n    *   With series feedback (feedback voltage in series with input at the gate-source loop), the input impedance is **increased**.\n    *   $Z_{in} \\approx \\frac{1}{g_m} (1 + A_{open}\\beta)$.\n3.  **Output Impedance ($Z_{out}$)**:\n    *   The feedback samples the output voltage (shunt connection at output). This acts to stabilize the output voltage, which **decreases the output impedance**.\n    *   $Z_{out} \\approx \\frac{R_{load}}{1 + A_{open}\\beta}$. A lower output impedance is better for driving loads.\n4.  **Bandwidth**: Negative feedback generally increases the bandwidth of the amplifier (Gain-Bandwidth Product is constant).\n\n### Summary\nThe circuit is a **single-transistor non-inverting amplifier** with negative feedback.\n*   **Function**: Amplifies the input voltage $V_{in}$ to produce an output voltage $V_{out}$.\n*   **Gain**: Approximately $1 + \\frac{R_1}{R_2}$.\n*   **Key Features**: High input impedance (compared to a standard common-gate stage), low output impedance, and stable gain determined by passive resistors. It is electrically analogous to a non-inverting op-amp configuration where the MOSFET acts as the high-gain differential stage.",
        "format": "markdown",
        "sha256": "3c02e454b6718195272783e63662dc8972dc98be40a2e2417bf8cad4bf371f44"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback, and derives the correct closed-loop gain, including its large-loop-gain limit. The input/output impedance discussion is secondary and does not contradict the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1341,
        "output_tokens": 9947,
        "total_tokens": 11288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1341,
        "output_tokens": 9947,
        "total_tokens": 11288,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8325,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification and Components\nThe circuit consists of two MOSFET transistors, $M_1$ and $M_2$, and a power supply $V_{DD}$.\n*   **Transistor $M_1$:** The arrow on the source terminal points outward (away from the channel), which identifies it as an **NMOS transistor**. Its drain is connected to $V_{DD}$, its gate to the input $V_{in}$, and its source to the output node $V_{out}$. This configuration is known as a **Common-Drain** or **Source Follower** amplifier.\n*   **Transistor $M_2$:** Similarly, the arrow points outward, identifying it as an **NMOS transistor**. Its drain is connected to the output node $V_{out}$, its gate to a fixed bias voltage $V_b$, and its source to ground. This configuration acts as a **constant current source** (or active load).\n\n### 2. DC Analysis (Biasing)\n*   **Role of $M_2$:** The transistor $M_2$ is biased by a fixed voltage $V_b$ at its gate. Assuming $M_2$ is in the saturation region (which is typical for bias circuits), it acts as a current source providing a constant bias current $I_{bias}$ to the circuit.\n    $$I_{D2} \\approx \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{th})^2$$\n    (ignoring channel-length modulation for simplicity).\n*   **Role of $M_1$:** Since the gate current of a MOSFET is zero, the current flowing through $M_1$ ($I_{D1}$) must equal the current flowing through $M_2$ ($I_{D2}$). Therefore, $I_{D1} = I_{D2} = I_{bias}$.\n*   **Output Voltage ($V_{out}$):** For $M_1$ to conduct this current, there must be a specific gate-to-source voltage $V_{GS1}$. The relationship is:\n    $$V_{out} = V_{in} - V_{GS1}$$\n    Since $I_{D1}$ is constant, $V_{GS1}$ is roughly constant. Thus, the DC output voltage $V_{out}$ tracks the input DC voltage $V_{in}$ with a fixed offset (threshold voltage drop).\n\n### 3. AC / Small-Signal Analysis\nTo analyze the signal behavior, we consider small-signal variations around the DC operating point.\n*   **$M_1$ (Source Follower):** In small-signal terms, $M_1$ acts as a voltage-controlled current source $g_{m1}v_{gs1}$ flowing from drain to source. Here, $v_{gs1} = v_{in} - v_{out}$.\n*   **$M_2$ (Current Source Load):** Since the gate of $M_2$ is connected to a DC voltage $V_b$, it is at AC ground ($v_g = 0$). The source is also at AC ground ($v_s = 0$). Therefore, $v_{gs2} = 0$, and the dependent current source $g_{m2}v_{gs2}$ is turned off (open circuit). $M_2$ effectively appears as its output resistance, $r_{o2}$, connected to ground.\n\n**Voltage Gain ($A_v$):**\nApplying Kirchhoff's Current Law (KCL) at the output node $V_{out}$:\nThe current generated by $M_1$ flows into the node: $g_{m1}(v_{in} - v_{out})$.\nThe current leaving the node through the output resistances ($r_{o1}$ of $M_1$ and $r_{o2}$ of $M_2$) is: $\\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}}$.\n\n$$g_{m1}(v_{in} - v_{out}) = v_{out} \\left( \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right)$$\n$$g_{m1}v_{in} = v_{out} \\left( g_{m1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right)$$\n\nThe voltage gain is:\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}}{g_{m1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = \\frac{g_{m1} (r_{o1} \\parallel r_{o2})}{1 + g_{m1} (r_{o1} \\parallel r_{o2})}$$\n\nSince $g_{m1} (r_{o1} \\parallel r_{o2})$ is typically much greater than 1 (because output resistances $r_o$ are large), the gain is approximately **1** ($A_v \\approx 1$).\n\n**Input Impedance ($Z_{in}$):**\nThe input is applied to the gate of $M_1$. Since the gate current of a MOSFET is zero, the input impedance is extremely high (ideally infinite).\n$$Z_{in} \\approx \\infty$$\n\n**Output Impedance ($Z_{out}$):**\nLooking into the source of $M_1$ (with $V_{in}$ grounded), the output impedance is roughly the inverse of the transconductance.\n$$Z_{out} \\approx \\frac{1}{g_{m1}} \\parallel r_{o1} \\parallel r_{o2} \\approx \\frac{1}{g_{m1}}$$\nThis is a very low impedance.\n\n### 4. Conclusion\nThe circuit is a **Source Follower (Common-Drain Amplifier) with an active current-source load**.\n\n*   **Function:** It acts as a **voltage buffer**.\n*   **Key Characteristics:**\n    *   **Voltage Gain:** $\\approx 1$ (unity gain). The output voltage follows the input voltage.\n    *   **Input Impedance:** Very high (does not load the previous stage).\n    *   **Output Impedance:** Very low (can drive heavy loads).\n\nThis circuit is commonly used to isolate high-impedance stages from low-impedance loads, preventing signal degradation. Note that body effect (since the source of $M_1$ is at a different potential than the substrate/ground) would slightly reduce the gain and increase the output impedance, but the overall behavior remains that of a buffer.",
        "format": "markdown",
        "sha256": "17a904b3c3611c61651b87bcdec7f3fa5076bd13725f2ab5e4b14c81eb005b47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with positive near-unity gain and low output impedance. The ideal-model gain is appropriate, and it notes that body effect slightly reduces the gain.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 966,
        "output_tokens": 9874,
        "total_tokens": 10840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 966,
        "output_tokens": 9874,
        "total_tokens": 10840,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8364,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Source Follower** (also known as a **Common Drain Amplifier**) with an **active load** (current source load).\n\n### 2. Component Analysis\n*   **$M_1$ (Top Transistor):**\n    *   **Type:** NMOS transistor (indicated by the arrow pointing away from the channel/gate).\n    *   **Configuration:** **Common Drain** (Source Follower).\n        *   **Gate:** Connected to the input signal $V_{in}$.\n        *   **Drain:** Connected to the supply voltage $V_{DD}$ (which is an AC ground).\n        *   **Source:** Connected to the output node $V_{out}$.\n    *   **Role:** $M_1$ acts as the main amplifying device. In a source follower configuration, the output voltage at the source \"follows\" the input voltage at the gate.\n\n*   **$M_2$ (Bottom Transistor):**\n    *   **Type:** NMOS transistor.\n    *   **Configuration:** **Common Source** (biased as a current source).\n        *   **Gate:** Connected to a fixed bias voltage $V_b$.\n        *   **Source:** Connected to Ground.\n        *   **Drain:** Connected to the output node $V_{out}$.\n    *   **Role:** Since the gate voltage $V_b$ is constant, $M_2$ operates as a **constant current source** (assuming it is in the saturation region). It acts as the active load for the stage above, providing a high impedance path to ground and setting the quiescent (bias) current for the circuit.\n\n### 3. DC Analysis (Operating Point)\n*   The bias voltage $V_b$ sets a constant current $I_{D2}$ flowing through $M_2$.\n*   This same current flows through $M_1$ (since they are in series).\n*   For $M_1$ to conduct, $V_{in}$ must be greater than $V_{out} + V_{th1}$ (where $V_{th1}$ is the threshold voltage of $M_1$).\n*   The relationship is approximately: $V_{out} \\approx V_{in} - V_{GS1}$. Since $V_{GS1} \\approx V_{th1}$ (plus a small overdrive voltage), the output DC level is shifted down from the input by roughly the threshold voltage: **$V_{out} \\approx V_{in} - V_{th}$**.\n\n### 4. Small-Signal (AC) Analysis\n*   **Voltage Gain ($A_v$):**\n    The circuit is a source follower, which has a voltage gain slightly less than unity (1).\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}(r_{o1} \\parallel r_{o2})}{1 + g_{m1}(r_{o1} \\parallel r_{o2})}$$\n    Where:\n    *   $g_{m1}$ is the transconductance of $M_1$.\n    *   $r_{o1}$ is the output resistance of $M_1$.\n    *   $r_{o2}$ is the output resistance of $M_2$ (since $M_2$'s gate is at AC ground, it just looks like a resistor $r_{o2}$ to ground).\n    \n    Since $g_{m1} r_o \\gg 1$, the gain is approximately **$A_v \\approx 1$**. This means the output voltage follows the input voltage.\n\n*   **Output Resistance ($R_{out}$):**\n    Looking into the output node (source of $M_1$), the resistance is low.\n    $$R_{out} = \\frac{1}{g_{m1}} \\parallel r_{o1} \\parallel r_{o2}$$\n    Typically, $\\frac{1}{g_{m1}}$ is the dominant term, so **$R_{out} \\approx \\frac{1}{g_{m1}}$**. This low output impedance is a key characteristic of source followers.\n\n*   **Input Resistance ($R_{in}$):**\n    The input is connected to the gate of a MOSFET, so the input resistance is **very high** (ideally infinite).\n\n### 5. Summary of Function\nThis circuit acts as a **voltage buffer** or **impedance matcher**.\n*   It takes a high-impedance input signal ($V_{in}$) and provides a low-impedance output ($V_{out}$) capable of driving a load.\n*   It provides current gain but no voltage gain.\n*   It shifts the DC level of the signal by approximately $V_{th}$.",
        "format": "markdown",
        "sha256": "d46ee8ddc1bce3c2382b86a5d9d8fe9d43f0765f7b987df082b2f39c663bf0b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, and gives a positive gain below but near unity. The omitted body-effect terms are refinements, not essential under the golden solution's full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 966,
        "output_tokens": 6692,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 966,
        "output_tokens": 6692,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5618,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit's topology, operation, and characteristics.\n\n### 1. Circuit Identification\nThe circuit consists of two NMOS transistors, $M_1$ and $M_2$, connected in series between the supply voltage $V_{DD}$ and ground.\n*   **$M_1$ (Input Transistor):** The gate is connected to the input signal $V_{in}$, the drain is connected to $V_{DD}$, and the source is connected to the output node $V_{out}$. This configuration is known as a **Common-Drain** or **Source-Follower** amplifier.\n*   **$M_2$ (Load Transistor):** The gate is connected to a fixed bias voltage $V_b$, the drain is connected to $V_{out}$, and the source is connected to ground. Since the gate voltage is constant, $M_2$ operates as a **constant current source** (active load), provided it is in the saturation region.\n\n**Overall Circuit Function:** This is an **NMOS Source Follower with an active load**. It acts as a voltage buffer.\n\n### 2. DC Analysis (Operating Point)\nLet's assume both transistors are in the saturation region.\n*   **Current through $M_2$:** Since $M_2$ is biased by a constant voltage $V_b$, it acts as a current source setting a bias current $I_{bias}$.\n    $$I_{D2} \\approx \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_b - V_{th2})^2$$\n    (Ignoring channel-length modulation for simplicity).\n\n*   **Current through $M_1$:** The current $I_{D1}$ must equal $I_{D2}$ because they are in series.\n    $$I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{th1})^2$$\n    Here, $V_{GS1} = V_{in} - V_{out}$.\n\n*   **Relationship between $V_{in}$ and $V_{out}$:**\n    Equating $I_{D1} = I_{D2}$:\n    $$\\sqrt{\\frac{2 I_{D2}}{\\mu_n C_{ox} (W/L)_1}} + V_{th1} = V_{in} - V_{out}$$\n    $$V_{out} = V_{in} - V_{th1} - \\sqrt{\\frac{2 I_{D2}}{\\mu_n C_{ox} (W/L)_1}}$$\n\n    **Conclusion:** The output voltage $V_{out}$ follows the input voltage $V_{in}$ but is shifted down by a DC offset (roughly the threshold voltage $V_{th1}$ plus a constant term determined by the bias current and transistor sizes). This confirms the circuit acts as a **level shifter** and a buffer. For $M_1$ to be on, $V_{in} > V_{out} + V_{th1}$.\n\n### 3. Small-Signal (AC) Analysis\nLet's analyze the small-signal behavior to find the voltage gain and output impedance. We assume $V_{DD}$ and $V_b$ are AC grounds.\n\n*   **Small-Signal Model:**\n    *   **$M_1$:** Has transconductance $g_{m1}$ and output resistance $r_{o1}$. The gate is at $v_{in}$, source is at $v_{out}$. The dependent current source is $g_{m1}v_{gs1} = g_{m1}(v_{in} - v_{out})$ flowing from drain (AC ground) to source ($v_{out}$).\n    *   **$M_2$:** The gate is at AC ground ($V_b$) and source is at AC ground (GND). Thus, $v_{gs2} = 0$. The transistor acts purely as its output resistance $r_{o2}$ connected from $v_{out}$ to ground.\n    *   **Body Effect:** The source of $M_1$ is at $v_{out}$ and the bulk is at ground. This creates a body effect with transconductance $g_{mb1}$. The current source $g_{mb1}v_{sb} = g_{mb1}v_{out}$ flows from source to bulk (ground).\n\n*   **KCL at Output Node ($v_{out}$):**\n    Sum of currents leaving the node = 0.\n    Currents leaving through resistances and body effect: $\\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} + g_{mb1}v_{out}$.\n    Current entering from $M_1$'s dependent source: $g_{m1}(v_{in} - v_{out})$.\n\n    $$g_{m1}(v_{in} - v_{out}) = v_{out} \\left( \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} + g_{mb1} \\right)$$\n    $$g_{m1}v_{in} = v_{out} \\left( g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right)$$\n\n*   **Voltage Gain ($A_v$):**\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1} || r_{o2}}}$$\n    Let $R_L' = r_{o1} || r_{o2}$.\n    $$A_v = \\frac{g_{m1} R_L'}{1 + (g_{m1} + g_{mb1})R_L'} \\approx \\frac{g_{m1}}{g_{m1} + g_{mb1}}$$\n    Since $g_{mb1} = \\eta g_{m1}$ (where $\\eta$ is the body effect coefficient, typically $0.1 - 0.3$), the gain is:\n    $$A_v \\approx \\frac{1}{1 + \\eta}$$\n    **The voltage gain is slightly less than unity (close to 1).**\n\n*   **Output Impedance ($R_{out}$):**\n    Setting $v_{in} = 0$ and applying a test voltage $v_x$ at the output:\n    $$R_{out} = \\frac{v_x}{i_x} = \\frac{1}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} \\approx \\frac{1}{g_{m1} + g_{mb1}}$$\n    **The output impedance is low** (typically a few hundred ohms).\n\n*   **Input Impedance ($R_{in}$):**\n    The input is connected to the gate of a MOSFET.\n    **The input impedance is extremely high** (ideally infinite at low frequencies).\n\n### 4. Summary\nThe circuit is a **Source Follower (Common Drain Amplifier)** with an active current-source load.\n\n*   **Function:** It acts as a **voltage buffer**. It takes a high-impedance input signal and provides a low-impedance output signal that follows the input voltage (with a DC level shift).\n*   **Voltage Gain:** $\\approx 1$ (Unity gain).\n*   **Input Resistance:** Very High ($\\infty$).\n*   **Output Resistance:** Low ($\\approx 1/g_m$).\n*   **Application:** This circuit is commonly used to isolate stages (buffering) to prevent loading effects, or to drive low-impedance loads (like transmission lines or capacitive loads) from a high-impedance source. It also performs level shifting, lowering the DC voltage level of the signal.",
        "format": "markdown",
        "sha256": "170a301fed39b1b418e5cb39997f81ed2f28f663b9e583f5d6d71df21c6eec8b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as the current-source load, and derives a positive gain slightly below unity with the expected body-effect and output-resistance terms. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 966,
        "output_tokens": 8822,
        "total_tokens": 9788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 966,
        "output_tokens": 8822,
        "total_tokens": 9788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7010,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the fundamental building block of digital logic circuits.\n\n### 2. Component Analysis\nThe circuit consists of two MOSFET transistors connected in a specific configuration:\n*   **$M_2$ (Top Transistor):** This is a **PMOS** transistor.\n    *   Its source is connected to the positive supply voltage, $V_{DD}$.\n    *   Its gate is connected to the input, $V_{in}$.\n    *   Its drain is connected to the output, $V_{out}$.\n    *   The arrow on the symbol points inward (towards the channel), which is characteristic of a PMOS device (or indicates the source connection for a PMOS in some conventions).\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** transistor.\n    *   Its source is connected to Ground (0V).\n    *   Its gate is connected to the input, $V_{in}$.\n    *   Its drain is connected to the output, $V_{out}$.\n    *   The arrow on the symbol points outward (away from the channel), which is characteristic of an NMOS device.\n\n### 3. Operation Analysis\nThe circuit operates based on the logic levels of the input voltage $V_{in}$. Let's assume a digital logic system where Logic Low is 0V and Logic High is $V_{DD}$.\n\n*   **Case 1: Input $V_{in}$ is Low (Logic 0, $\\approx 0$V)**\n    *   **NMOS ($M_1$):** The gate-source voltage $V_{GS} = V_{in} - 0 = 0$V. Since $V_{GS}$ is less than the threshold voltage ($V_{th}$), the NMOS transistor $M_1$ is **OFF** (cutoff). It acts like an open switch.\n    *   **PMOS ($M_2$):** The source-gate voltage $V_{SG} = V_{DD} - V_{in} = V_{DD}$. Since $V_{SG}$ is greater than the magnitude of the threshold voltage ($|V_{th}|$), the PMOS transistor $M_2$ is **ON** (conducting). It acts like a closed switch.\n    *   **Result:** The output $V_{out}$ is connected to $V_{DD}$ through the conducting $M_2$. Therefore, **$V_{out} \\approx V_{DD}$ (Logic High)**.\n\n*   **Case 2: Input $V_{in}$ is High (Logic 1, $\\approx V_{DD}$)**\n    *   **NMOS ($M_1$):** The gate-source voltage $V_{GS} = V_{in} - 0 = V_{DD}$. Since $V_{GS} > V_{th}$, the NMOS transistor $M_1$ is **ON** (conducting).\n    *   **PMOS ($M_2$):** The source-gate voltage $V_{SG} = V_{DD} - V_{in} = 0$V. Since $V_{SG} < |V_{th}|$, the PMOS transistor $M_2$ is **OFF** (cutoff).\n    *   **Result:** The output $V_{out}$ is connected to Ground through the conducting $M_1$. Therefore, **$V_{out} \\approx 0$V (Logic Low)**.\n\n### 4. Conclusion\nThe circuit performs the logical **NOT** operation (inversion).\n*   If Input is 0 $\\rightarrow$ Output is 1.\n*   If Input is 1 $\\rightarrow$ Output is 0.\n\n**Key Characteristics of this Circuit:**\n*   **High Input Impedance:** Since the gates of MOSFETs are insulated (by oxide), the input draws negligible current. This allows for high fan-out (driving many other gates).\n*   **Low Static Power Dissipation:** In a steady state (either logic 0 or logic 1), one transistor is always OFF. This means there is no direct current path from $V_{DD}$ to Ground, resulting in very low static power consumption (ignoring leakage currents). Power is primarily consumed during the switching transition when both transistors are briefly on.",
        "format": "markdown",
        "sha256": "d52ed029f3d3be7f376e3c9bef57fb1374569c0720060cd42194fee12840e795"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, with a PMOS pull-up and NMOS pull-down, and accurately explains its inverting operation and low static current.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 3113,
        "total_tokens": 3355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 3113,
        "total_tokens": 3355,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2135,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the fundamental building block of digital logic circuits.\n\nIt consists of two transistors connected in a specific configuration:\n*   **$M_2$ (Top Transistor):** This is a **PMOS** transistor. We can identify it by the arrow on the source terminal (connected to $V_{DD}$) pointing inwards towards the channel, or simply by its position connected to the positive supply voltage ($V_{DD}$).\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** transistor. We can identify it by the arrow on the source terminal (connected to Ground) pointing outwards, or by its position connected to the ground.\n\n### 2. Circuit Connections\n*   **Input ($V_{\\text{in}}$):** The gates of both the PMOS ($M_2$) and NMOS ($M_1$) transistors are connected together to the input voltage $V_{\\text{in}}$.\n*   **Output ($V_{\\text{out}}$):** The drains of both transistors are connected together at the output node.\n*   **Power Supply:** The source of the PMOS ($M_2$) is connected to $V_{DD}$ (Logic High). The source of the NMOS ($M_1$) is connected to Ground (Logic Low).\n\n### 3. Operation Analysis\nThe circuit operates by switching between two states based on the input voltage $V_{\\text{in}}$. Let's assume $V_{DD}$ represents a Logic '1' and Ground (0V) represents a Logic '0'.\n\n**Case 1: Input is Low ($V_{\\text{in}} = 0$ V)**\n*   **NMOS ($M_1$):** The gate-to-source voltage $V_{GS} = 0$ V. Since this is less than the threshold voltage ($V_{th}$), the NMOS transistor is **OFF** (open circuit).\n*   **PMOS ($M_2$):** The source-to-gate voltage $V_{SG} = V_{DD} - 0 = V_{DD}$. Since this is greater than the threshold voltage magnitude ($|V_{th}|$), the PMOS transistor is **ON** (closed circuit).\n*   **Result:** The output $V_{\\text{out}}$ is connected to $V_{DD}$ through the conducting PMOS transistor. Therefore, **$V_{\\text{out}} \\approx V_{DD}$ (Logic High / 1)**.\n\n**Case 2: Input is High ($V_{\\text{in}} = V_{DD}$)**\n*   **NMOS ($M_1$):** The gate-to-source voltage $V_{GS} = V_{DD}$. Since $V_{GS} > V_{th}$, the NMOS transistor is **ON**.\n*   **PMOS ($M_2$):** The source-to-gate voltage $V_{SG} = V_{DD} - V_{DD} = 0$ V. Since this is less than the threshold voltage magnitude, the PMOS transistor is **OFF**.\n*   **Result:** The output $V_{\\text{out}}$ is connected to Ground through the conducting NMOS transistor. Therefore, **$V_{\\text{out}} \\approx 0$ V (Logic Low / 0)**.\n\n### 4. Summary of Function\nThe circuit inverts the input logic level.\n*   If Input is **0**, Output is **1**.\n*   If Input is **1**, Output is **0**.\n\nThis is the logical **NOT** operation, often represented as $V_{\\text{out}} = \\overline{V_{\\text{in}}}$ or $Y = \\text{NOT}(A)$.\n\n### 5. Key Characteristics\n*   **Static Power Dissipation:** Ideally zero. In steady state (either input 0 or input 1), one transistor is always OFF, creating an open path between $V_{DD}$ and Ground. No current flows from power supply to ground (except for tiny leakage currents).\n*   **High Input Impedance:** The gates of MOSFETs draw negligible DC current, so the circuit doesn't load the previous stage significantly.\n*   **Low Output Impedance:** In both logic states, the output is connected strongly to either $V_{DD}$ or Ground (through a low-resistance channel), allowing it to drive subsequent loads effectively.",
        "format": "markdown",
        "sha256": "22601d420e6970417a7c9f4f3297a386bb263ba9c361b61fed3369521ffc59d9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, and explains the complementary switching behavior and negligible ideal static current.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 3268,
        "total_tokens": 3510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 3268,
        "total_tokens": 3510,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2261,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of the circuit:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the fundamental building block of digital logic circuits.\n\n### 2. Component Analysis\nThe circuit consists of two MOSFET transistors connected in series between the power supply ($V_{DD}$) and ground:\n\n*   **$M_2$ (Top Transistor):** This is a **PMOS** transistor.\n    *   Its source is connected to the positive supply voltage, $V_{DD}$.\n    *   The arrow on the symbol points inward, which is characteristic of a PMOS device (or indicates the direction of hole current/conventional current flow from source to channel).\n*   **$M_1$ (Bottom Transistor):** This is an **NMOS** transistor.\n    *   Its source is connected to Ground (0V).\n    *   The arrow on the symbol points outward, which is characteristic of an NMOS device.\n\n### 3. Connections\n*   **Input ($V_{in}$):** The gates of both transistors ($M_1$ and $M_2$) are connected together to the input terminal $V_{in}$.\n*   **Output ($V_{out}$):** The drains of both transistors are connected together at the output node $V_{out}$.\n\n### 4. Operation Analysis\nThe circuit functions as a logical NOT gate (inverter). Here is how it works for different input voltages:\n\n**Case 1: Input is Low ($V_{in} \\approx 0$ V)**\n*   **NMOS ($M_1$):** The gate-to-source voltage $V_{GS} = 0$ V. Since this is less than the threshold voltage ($V_{th}$), $M_1$ is **OFF** (acts like an open switch). No current flows to ground.\n*   **PMOS ($M_2$):** The source-to-gate voltage $V_{SG} = V_{DD} - 0 = V_{DD}$. Since this is greater than the threshold voltage magnitude ($|V_{th}|$), $M_2$ is **ON** (acts like a closed switch).\n*   **Result:** The output $V_{out}$ is connected to $V_{DD}$ through the conducting $M_2$. Therefore, **$V_{out} = V_{DD}$ (Logic High / 1)**.\n\n**Case 2: Input is High ($V_{in} \\approx V_{DD}$)**\n*   **NMOS ($M_1$):** The gate-to-source voltage $V_{GS} = V_{DD}$. Since $V_{GS} > V_{th}$, $M_1$ is **ON**.\n*   **PMOS ($M_2$):** The source-to-gate voltage $V_{SG} = V_{DD} - V_{DD} = 0$ V. Since $V_{SG} < |V_{th}|$, $M_2$ is **OFF**.\n*   **Result:** The output $V_{out}$ is connected to Ground through the conducting $M_1$. Therefore, **$V_{out} = 0$ V (Logic Low / 0)**.\n\n### 5. Summary\nThe circuit performs the logical inversion function:\n$$V_{out} = \\text{NOT}(V_{in})$$\n\n**Key Advantages of this Circuit:**\n*   **High Input Impedance:** Since the gates of MOSFETs are insulated, almost no current flows into the input terminal ($I_{in} \\approx 0$).\n*   **Low Static Power Consumption:** In a steady state (either logic 0 or logic 1), one of the transistors is always off, creating an open circuit between $V_{DD}$ and ground. Therefore, ideally, no static current flows, and power is only consumed during the switching transition.",
        "format": "markdown",
        "sha256": "843a353fb0a55c60e1dd69ab2ae219431838eb3a2cac7ba94b8c79ad4ebf95b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter, its PMOS pull-up and NMOS pull-down, shared input and output connections, and complementary operation. The answer is consistent with the golden solution.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 2992,
        "total_tokens": 3234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 2992,
        "total_tokens": 3234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2120,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the fundamental building block of digital logic circuits.\n\n*   **Topology:** The circuit consists of two transistors, $M_1$ and $M_2$, connected in series between the supply voltage $V_{DD}$ and ground.\n*   **Input:** The gates of both transistors are connected together to form the input terminal $V_{\\text{in}}$.\n*   **Output:** The output $V_{\\text{out}}$ is taken from the common node between the two transistors.\n\n### 2. Transistor Types and Roles\nAlthough the schematic symbols can sometimes be ambiguous without specific conventions, in this standard topology:\n*   **$M_1$ (Top Transistor):** This is a **PMOS** transistor. It acts as the **pull-up device**. It connects the output to $V_{DD}$ when the input is low. (Note: In a PMOS transistor, the source is typically connected to the higher potential, $V_{DD}$).\n*   **$M_2$ (Bottom Transistor):** This is an **NMOS** transistor. It acts as the **pull-down device**. It connects the output to ground when the input is high. (Note: In an NMOS transistor, the source is typically connected to the lower potential, Ground).\n\n*Analysis of symbols:* The arrow on $M_2$ points away from the channel towards the source (ground), which is the standard symbol for an NMOS transistor. The arrow on $M_1$ is consistent with a PMOS transistor in certain conventions (pointing from the P-type source to the N-type bulk/channel), confirming the complementary pair.\n\n### 3. Circuit Operation (Logic Analysis)\nThe circuit functions as a **NOT gate** (inverter). Let's analyze the output voltage $V_{\\text{out}}$ for different input states:\n\n**Case 1: Input is Low ($V_{\\text{in}} \\approx 0$ V)**\n*   **$M_2$ (NMOS):** The gate-source voltage $V_{GS} = V_{\\text{in}} - 0 = 0$ V. Since $0 < V_{th,n}$ (threshold voltage), $M_2$ is **OFF** (cutoff). No current flows to ground.\n*   **$M_1$ (PMOS):** The source-gate voltage $V_{SG} = V_{DD} - V_{\\text{in}} = V_{DD}$. Since $V_{DD} > |V_{th,p}|$, $M_1$ is **ON** (conducting).\n*   **Result:** $M_1$ pulls the output node up to $V_{DD}$.\n*   **Output:** $V_{\\text{out}} \\approx V_{DD}$ (Logic **High**).\n\n**Case 2: Input is High ($V_{\\text{in}} \\approx V_{DD}$)**\n*   **$M_2$ (NMOS):** The gate-source voltage $V_{GS} = V_{\\text{in}} - 0 = V_{DD}$. Since $V_{DD} > V_{th,n}$, $M_2$ is **ON** (conducting).\n*   **$M_1$ (PMOS):** The source-gate voltage $V_{SG} = V_{DD} - V_{\\text{in}} = 0$ V. Since $0 < |V_{th,p}|$, $M_1$ is **OFF** (cutoff). No current flows from $V_{DD}$.\n*   **Result:** $M_2$ pulls the output node down to ground.\n*   **Output:** $V_{\\text{out}} \\approx 0$ V (Logic **Low**).\n\n### 4. Voltage Transfer Characteristic (VTC)\nThe relationship between input voltage $V_{\\text{in}}$ and output voltage $V_{\\text{out}}$ is called the Voltage Transfer Characteristic.\n*   For $V_{\\text{in}} < V_{th,n}$, $V_{\\text{out}} = V_{DD}$.\n*   For $V_{\\text{in}} > V_{DD} - |V_{th,p}|$, $V_{\\text{out}} = 0$.\n*   In the transition region (around $V_{\\text{in}} = V_{DD}/2$), both transistors are partially on. This creates a steep voltage drop, providing high gain and noise immunity. Ideally, the transition is vertical at $V_{\\text{in}} = V_{DD}/2$.\n\n### 5. Key Features and Advantages\n*   **Logic Function:** $V_{\\text{out}} = \\overline{V_{\\text{in}}}$ (Inversion).\n*   **Static Power Consumption:** Ideally zero. In steady state (either logic 0 or logic 1), one of the transistors is always OFF, preventing a direct current path from $V_{DD}$ to ground. (Current only flows briefly during the switching transition).\n*   **Noise Immunity:** CMOS inverters have high noise margins because the output swings fully from rail to rail ($0$ to $V_{DD}$).\n*   **Input Impedance:** Very high, as the gate of a MOSFET draws negligible DC current.\n\n**Summary:** The circuit is a **CMOS Inverter** that takes an input voltage $V_{\\text{in}}$ and produces an inverted output voltage $V_{\\text{out}}$ (High becomes Low, Low becomes High).",
        "format": "markdown",
        "sha256": "de309dacd0428008a6454cf57ed36cd5b7e32fd7dc300297df078fdd69ddea6a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as a complementary CMOS inverter. Both devices are NMOS; this topology-identification error requires a score of 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 12714,
        "total_tokens": 12956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 12714,
        "total_tokens": 12956,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an analysis.\n\n### 1. Component Identification\nThe circuit consists of two transistors, labeled $M_1$ and $M_2$, and an input voltage $V_{in}$ and output voltage $V_{out}$.\n\n*   **Transistor Symbols:** The symbols used for both $M_1$ and $M_2$ show an arrow pointing away from the channel/gate towards the source terminal (downwards). In standard MOSFET schematic symbols:\n    *   An arrow pointing **out** from the source indicates an **NMOS** transistor.\n    *   An arrow pointing **in** to the source indicates a **PMOS** transistor.\n    *   Therefore, based on the strict interpretation of the symbols, **both $M_1$ and $M_2$ are NMOS transistors**.\n\n*   **Configuration:**\n    *   **$M_1$ (Top Transistor):** The drain is connected to $V_{DD}$, the gate to $V_{in}$, and the source to $V_{out}$. This is a **Source Follower** (or Common Drain) configuration.\n    *   **$M_2$ (Bottom Transistor):** The drain is connected to $V_{out}$, the gate to $V_{in}$, and the source to Ground. This is a **Common Source** configuration.\n\n### 2. Circuit Analysis (Literal Interpretation: Two NMOS Transistors)\nIf we analyze the circuit strictly as drawn (two NMOS transistors in series):\n\n*   **Case 1: $V_{in} < V_{th}$ (Threshold Voltage)**\n    *   Both transistors $M_1$ and $M_2$ are turned **OFF** because the gate-source voltage ($V_{GS}$) is less than the threshold voltage ($V_{th}$) for both.\n    *   $M_1$: $V_{GS1} = V_{in} - V_{out}$. Since $V_{in}$ is low, this is $< V_{th}$.\n    *   $M_2$: $V_{GS2} = V_{in} - 0 = V_{in}$. Since $V_{in} < V_{th}$, this is $< V_{th}$.\n    *   **Result:** No current flows from $V_{DD}$ to Ground. The output node $V_{out}$ is **floating** (high impedance). Its voltage is undefined and depends on previous state or leakage.\n\n*   **Case 2: $V_{in} > V_{th}$**\n    *   **$M_2$ turns ON:** Since $V_{GS2} = V_{in} > V_{th}$, $M_2$ conducts current from $V_{out}$ to Ground. This tries to pull $V_{out}$ down to 0V.\n    *   **$M_1$ turns ON (conditionally):** $M_1$ conducts if $V_{GS1} = V_{in} - V_{out} > V_{th}$, which means $V_{out} < V_{in} - V_{th}$. $M_1$ acts as a source follower, trying to pull $V_{out}$ up to $V_{in} - V_{th}$.\n    *   **Operation:** A current path is established from $V_{DD}$ through $M_1$ to $V_{out}$, and then through $M_2$ to Ground. This is a \"shoot-through\" current path, which is inefficient for digital logic.\n    *   **Output Voltage ($V_{out}$):** The output voltage settles at a value where the current through $M_1$ equals the current through $M_2$ ($I_{D1} = I_{D2}$).\n        *   $M_1$ (Source Follower) limits the maximum output voltage to approximately $V_{in} - V_{th}$.\n        *   $M_2$ (Common Source) acts as a pull-down resistor.\n        *   The final $V_{out}$ depends on the aspect ratios (widths $W$) of the transistors.\n            *   If $M_2$ is much stronger ($W_2 \\gg W_1$), $V_{out}$ will be close to 0V. (Behavior: High Input $\\rightarrow$ Low Output).\n            *   If $M_1$ is much stronger ($W_1 \\gg W_2$), $V_{out}$ will be close to $V_{in} - V_{th}$. (Behavior: High Input $\\rightarrow$ High Output, but with a threshold drop).\n\n**Conclusion for Literal Circuit:** This circuit does not function as a standard digital logic gate (like a NOT gate) because of the floating output state when $V_{in}$ is low and the lack of rail-to-rail swing. It acts more like an **analog level shifter** or a **linear attenuator**.\n\n---\n\n### 3. Alternative Interpretation (CMOS Inverter)\nIn many textbook problems and standard digital design, this topology (transistor to $V_{DD}$ on top, transistor to GND on bottom, output in the middle) represents a **CMOS Inverter**. In a standard CMOS inverter:\n*   **$M_1$ is a PMOS transistor** (despite the symbol looking like NMOS, the position at $V_{DD}$ strongly suggests this).\n*   **$M_2$ is an NMOS transistor**.\n\nIf we assume $M_1$ is PMOS and $M_2$ is NMOS:\n*   **When $V_{in} = 0$ (Low):**\n    *   $M_1$ (PMOS) is **ON** ($V_{SG} = V_{DD} > |V_{thp}|$).\n    *   $M_2$ (NMOS) is **OFF** ($V_{GS} = 0 < V_{thn}$).\n    *   Current flows from $V_{DD}$ to $V_{out}$. **$V_{out} = V_{DD}$ (High / Logic 1).**\n*   **When $V_{in} = V_{DD}$ (High):**\n    *   $M_1$ (PMOS) is **OFF** ($V_{SG} = 0 < |V_{thp}|$).\n    *   $M_2$ (NMOS) is **ON** ($V_{GS} = V_{DD} > V_{thn}$).\n    *   Current flows from $V_{out}$ to Ground through $M_2$. **$V_{out} = 0$ (Low / Logic 0).**\n*   **Function:** This is a **NOT gate** (Inverter). It has high gain, low static power consumption (no current flow in steady state), and rail-to-rail output swing.\n\n### Summary\n*   **Strict Symbol Analysis:** The circuit is two NMOS transistors in series. It acts as a source-follower loaded common-source stage, resulting in a non-inverting transfer characteristic with limited voltage swing and a floating state for low inputs.\n*   **Standard Topology Analysis:** The circuit is likely intended to be a **CMOS Inverter** (NOT gate), where the top transistor $M_1$ is a PMOS and the bottom $M_2$ is an NMOS. This is the most common and useful circuit with this layout.",
        "format": "markdown",
        "sha256": "559889f92c9c3c369617d3587255c2b80ea31b2b43302d886decb3003594dd74"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Although it initially identifies the actual circuit as two NMOS devices, it later treats the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter, contradicting the essential topology.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 16210,
        "total_tokens": 16452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 16210,
        "total_tokens": 16452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis:\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Inverter** (Complementary Metal-Oxide-Semiconductor Inverter). It is the fundamental building block of CMOS digital logic circuits.\n\nAlthough the transistor symbols in the diagram can sometimes be ambiguous depending on the specific convention used (both arrows point in a similar direction), the topology is the standard configuration for a CMOS inverter:\n*   **$M_1$ (Top Transistor):** Connected to the supply voltage $V_{DD}$. In a CMOS inverter, this is a **PMOS** transistor acting as the **pull-up device**.\n*   **$M_2$ (Bottom Transistor):** Connected to Ground. In a CMOS inverter, this is an **NMOS** transistor acting as the **pull-down device**.\n*   **Input ($V_{\\text{in}}$):** Connected to the gates of both transistors.\n*   **Output ($V_{\\text{out}}$):** Connected to the drains of both transistors.\n\n### 2. Operation Analysis\nThe circuit functions as a logical **NOT gate** (inverter). Let's analyze the output voltage $V_{\\text{out}}$ for the two possible input logic levels.\n\n**Case 1: Input is Low ($V_{\\text{in}} \\approx 0$ V)**\n*   **$M_2$ (NMOS):** The gate-source voltage $V_{GS2} = V_{\\text{in}} - 0 = 0$ V. Since $0 < V_{\\text{th,n}}$ (threshold voltage), the NMOS transistor $M_2$ is **OFF** (cutoff). It acts like an open switch.\n*   **$M_1$ (PMOS):** The source-gate voltage $V_{SG1} = V_{DD} - V_{\\text{in}} = V_{DD}$. Since $V_{DD} > |V_{\\text{th,p}}|$, the PMOS transistor $M_1$ is **ON** (conducting). It acts like a closed switch.\n*   **Result:** The output $V_{\\text{out}}$ is connected to $V_{DD}$ through the conducting $M_1$, and the path to ground is blocked by the off $M_2$. Therefore, **$V_{\\text{out}} \\approx V_{DD}$ (Logic High)**.\n\n**Case 2: Input is High ($V_{\\text{in}} \\approx V_{DD}$)**\n*   **$M_2$ (NMOS):** The gate-source voltage $V_{GS2} = V_{\\text{in}} - 0 = V_{DD}$. Since $V_{DD} > V_{\\text{th,n}}$, the NMOS transistor $M_2$ is **ON**.\n*   **$M_1$ (PMOS):** The source-gate voltage $V_{SG1} = V_{DD} - V_{\\text{in}} = 0$ V. Since $0 < |V_{\\text{th,p}}|$, the PMOS transistor $M_1$ is **OFF**.\n*   **Result:** The output $V_{\\text{out}}$ is connected to Ground through the conducting $M_2$, and the path from $V_{DD}$ is blocked by the off $M_1$. Therefore, **$V_{\\text{out}} \\approx 0$ V (Logic Low)**.\n\n### 3. Summary of Function\nThe circuit inverts the input signal:\n*   If $V_{\\text{in}} = 0$ (Low) $\\rightarrow$ $V_{\\text{out}} = 1$ (High, $V_{DD}$)\n*   If $V_{\\text{in}} = 1$ (High, $V_{DD}$) $\\rightarrow$ $V_{\\text{out}} = 0$ (Low, 0 V)\n\nLogic Equation: **$V_{\\text{out}} = \\overline{V_{\\text{in}}}$** (NOT $V_{\\text{in}}$)\n\n### 4. Key Characteristics\n*   **Static Power Dissipation:** Ideally zero. In a steady state (either logic 0 or logic 1), one of the transistors is always off, preventing a direct current path from $V_{DD}$ to Ground. Current only flows during the brief switching transition.\n*   **High Input Impedance:** The gates of MOSFETs draw negligible DC current, so the input doesn't load the previous stage.\n*   **Strong Drive:** It has a low output impedance in both logic states (strong pull-up to $V_{DD}$ and strong pull-down to Ground), allowing it to drive capacitive loads quickly.",
        "format": "markdown",
        "sha256": "05490c46f64091834baa39e9076dcd867e614c4985e9552e62e9541f601a83a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as an ordinary CMOS inverter. Both devices are NMOS, so this topology and its operation are incorrect.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 9426,
        "total_tokens": 9668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 242,
        "output_tokens": 9426,
        "total_tokens": 9668,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Source Amplifier with a Diode-Connected Active Load**. It is a fundamental building block in analog integrated circuit design.\n\n### 2. Component Analysis\n*   **$M_1$ (NMOS Transistor):**\n    *   **Type:** Enhancement-mode NMOS transistor (indicated by the arrow pointing outwards from the source/substrate).\n    *   **Configuration:** The source is connected to ground, the gate receives the input signal $V_{in}$, and the drain is connected to the output node $V_{out}$. This is a **Common-Source (CS)** configuration.\n    *   **Role:** It acts as the amplifying device (the driver).\n\n*   **$M_2$ (PMOS Transistor):**\n    *   **Type:** Enhancement-mode PMOS transistor (indicated by the arrow pointing inwards).\n    *   **Configuration:** The source is connected to $V_{DD}$. The gate is connected directly to the drain (the node at $V_{out}$). This connection (Gate tied to Drain) is known as a **diode-connected** configuration.\n    *   **Role:** It acts as the **active load** for the amplifier.\n\n### 3. DC Operation and Regions of Operation\n*   **$M_2$ (Load):** Since the gate of $M_2$ is connected to its drain, $V_{SG2} = V_{SD2}$. For a PMOS transistor to be in saturation, the condition is $V_{SD} \\ge V_{SG} - |V_{tp}|$. Substituting $V_{SD} = V_{SG}$, we get $V_{SG} \\ge V_{SG} - |V_{tp}|$, which simplifies to $|V_{tp}| \\ge 0$. This is always true. Therefore, **$M_2$ always operates in the saturation region** (assuming it is turned on).\n*   **$M_1$ (Driver):** Depending on the value of $V_{in}$ and $V_{out}$, $M_1$ can operate in either the saturation or triode (linear) region. For linear amplification, $M_1$ is typically biased in the saturation region.\n*   **Current Flow:** In steady state, the drain current of $M_1$ must equal the drain current of $M_2$ ($I_{D1} = I_{D2}$). The output voltage $V_{out}$ settles at a DC value where these two currents balance.\n\n### 4. Small-Signal Analysis\nTo analyze the AC performance (gain and impedance), we look at the small-signal model:\n\n*   **Output Resistance ($R_{out}$):** Looking into the output node $V_{out}$, we see the output resistance of $M_1$ ($r_{o1}$), the output resistance of $M_2$ ($r_{o2}$), and the resistance looking into the diode-connected $M_2$.\n    *   The resistance looking into the drain of a diode-connected MOSFET is $1/g_{m2} || r_{o2}$.\n    *   Therefore, the total output resistance is:\n        $$R_{out} = r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}$$\n    *   Typically, $1/g_{m2} \\ll r_{o2}$ and $1/g_{m2} \\ll r_{o1}$, so $R_{out} \\approx \\frac{1}{g_{m2}}$.\n\n*   **Voltage Gain ($A_v$):** The voltage gain is the product of the transconductance of the input transistor ($g_{m1}$) and the total load resistance.\n    $$A_v = \\frac{v_{out}}{v_{in}} = -g_{m1} \\cdot R_{out}$$\n    $$A_v \\approx -g_{m1} \\left( \\frac{1}{g_{m2}} \\parallel r_{o1} \\parallel r_{o2} \\right)$$\n    If we assume ideal current sources (large $r_o$), the gain simplifies to:\n    $$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n    Since $g_m \\propto \\sqrt{W/L}$ (in saturation) or $W/L$ (in triode/linear approximation for small signals), the gain is roughly proportional to the ratio of the aspect ratios: $A_v \\approx -\\frac{(W/L)_1}{(W/L)_2}$.\n\n### 5. Summary of Characteristics\n*   **Function:** It is an **inverting amplifier**. As $V_{in}$ increases, $M_1$ conducts more current, pulling $V_{out}$ down through $M_2$.\n*   **Gain:** The gain is relatively low compared to amplifiers with current-source loads. The maximum theoretical gain is limited by the ratio of the transconductances ($g_{m1}/g_{m2}$). To get high gain, $(W/L)_1$ must be much larger than $(W/L)_2$.\n*   **Output Impedance:** The output impedance is low (approximately $1/g_{m2}$), which is a disadvantage for voltage amplification stages that need to drive high-impedance loads, but useful for buffering or specific analog applications.\n*   **Linearity:** The diode-connected load is non-linear, which can cause distortion in large-signal operation.",
        "format": "markdown",
        "sha256": "a167aece33d9572f7023b6a93b0b0ac942e910af945a3d1abe5e9bd1837824b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently. The aspect-ratio scaling comment is imprecise, but does not change the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 581,
        "output_tokens": 5138,
        "total_tokens": 5719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 581,
        "output_tokens": 5138,
        "total_tokens": 5719,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Component Identification\n*   **$M_1$**: This is an **NMOS transistor**.\n    *   The gate is connected to the input voltage $V_{in}$.\n    *   The source is connected to ground (0V).\n    *   The arrow on the source terminal points outward, which is characteristic of an NMOS device.\n*   **$M_2$**: This is a **PMOS transistor**.\n    *   The source is connected to the positive supply $V_{DD}$.\n    *   The gate is connected to its own drain (the node $V_{out}$). This configuration is known as a **diode-connected transistor**.\n    *   The arrow on the source terminal points inward, characteristic of a PMOS device.\n\n### 2. Circuit Configuration\nThis circuit is a **Common-Source Amplifier with a Diode-Connected Active Load**. It can also be viewed as a specific type of logic inverter.\n\n*   **Input Stage ($M_1$)**: The NMOS transistor $M_1$ acts as the input device. It converts the input voltage $V_{in}$ into a current. Since the source is grounded, this is a common-source configuration.\n*   **Load Stage ($M_2$)**: The PMOS transistor $M_2$ acts as the active load. Because its gate is connected to its drain ($V_{out}$), it is \"diode-connected\".\n    *   For a PMOS, $V_{SG} = V_{DD} - V_{out}$ and $V_{SD} = V_{DD} - V_{out}$.\n    *   Since $V_{SD} = V_{SG}$, the condition for saturation ($V_{SD} \\ge V_{SG} - |V_{tp}|$) is always satisfied (as long as the transistor is on). Therefore, **$M_2$ always operates in the saturation region** (when conducting).\n\n### 3. Circuit Operation (Transfer Characteristic)\nThe circuit functions as an **inverter** (NOT gate) or a high-gain amplifier.\n\n*   **Case 1: Low Input ($V_{in} < V_{tn}$, where $V_{tn}$ is the threshold voltage of $M_1$)**\n    *   $M_1$ is in **cutoff** (OFF). No current flows through $M_1$ ($I_{D1} = 0$).\n    *   Consequently, no current flows through $M_2$ ($I_{D2} = 0$).\n    *   Since there is no current, there is no voltage drop across the transistors. $V_{out}$ is pulled up to $V_{DD}$.\n    *   At $V_{out} = V_{DD}$, $V_{SG2} = 0$, so $M_2$ is also in cutoff.\n    *   **Result**: $V_{out} = V_{DD}$ (Logic High).\n\n*   **Case 2: High Input ($V_{in} > V_{tn}$)**\n    *   $M_1$ turns **ON**. Current begins to flow from $V_{DD}$, through $M_2$, and through $M_1$ to ground.\n    *   This current causes a voltage drop, pulling $V_{out}$ down from $V_{DD}$.\n    *   As $V_{out}$ decreases, $V_{SG2}$ ($V_{DD} - V_{out}$) increases, keeping $M_2$ in saturation.\n    *   $M_1$ will operate in either the saturation or triode (linear) region depending on the value of $V_{out}$.\n    *   **Result**: As $V_{in}$ increases, $V_{out}$ decreases. This is an **inverting** behavior.\n\n### 4. Small-Signal Analysis (Amplifier Mode)\nIf this circuit is used as an amplifier (with a DC bias at $V_{in}$):\n*   The small-signal output resistance looking into the drain of $M_2$ (diode-connected) is approximately $1/g_{m2}$ (ignoring $r_o$).\n*   The total load resistance at the output node is $R_{out} \\approx r_{o1} || (1/g_{m2})$.\n*   The voltage gain $A_v$ is given by:\n    $$A_v = -g_{m1} \\cdot (r_{o1} || \\frac{1}{g_{m2}}) \\approx -\\frac{g_{m1}}{g_{m2}}$$\n*   Since $g_m \\propto \\sqrt{\\mu C_{ox} (W/L)}$, and electron mobility $\\mu_n$ is typically greater than hole mobility $\\mu_p$, the gain can be significant (greater than 1 in magnitude) if the transistor sizes $(W/L)$ are comparable. This makes it a **high-gain amplifier stage**.\n\n### Summary\nThe circuit is an **NMOS inverter with a diode-connected PMOS active load**.\n*   **Function**: Inverts the input signal ($V_{out} \\approx V_{DD} - V_{in}$ roughly, but non-linear).\n*   **Key Feature**: The load $M_2$ is always in saturation, providing a high impedance load which results in high voltage gain. This is a common building block in analog integrated circuits (like op-amps) and some digital logic families.",
        "format": "markdown",
        "sha256": "b7c65a0db0788df3d531b2f3cf1e5e25bd26c0a86696e4e603c91975e07efaad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain. Its gain expression includes ro1 but omits ro2, which the golden solution assigns a score of 3; calling the stage high-gain also overstates the typical result.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 581,
        "output_tokens": 6382,
        "total_tokens": 6963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 581,
        "output_tokens": 6382,
        "total_tokens": 6963,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5164,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis of the circuit's components, configuration, and function.\n\n### 1. Component Identification\nThe circuit consists of two MOSFET transistors connected in series between a supply voltage $V_{DD}$ and ground.\n\n*   **$M_1$ (Bottom Transistor):**\n    *   **Type:** NMOS transistor. The arrow on the source terminal points outward (away from the channel), which is the standard symbol for an NMOS device.\n    *   **Connections:** The source is connected to ground. The gate is connected to the input voltage $V_{in}$. The drain is connected to the output node $V_{out}$.\n    *   **Role:** This acts as the **driver transistor** or the input amplifying device.\n\n*   **$M_2$ (Top Transistor):**\n    *   **Type:** PMOS transistor. The arrow on the source terminal (connected to $V_{DD}$) points inward (towards the channel), indicating a PMOS device.\n    *   **Connections:** The source is connected to $V_{DD}$. The gate is connected directly to the drain (the node at $V_{out}$). This specific configuration is known as **diode-connected**.\n    *   **Role:** This acts as the **active load** for the circuit.\n\n### 2. Circuit Configuration\nThe circuit is a **Common-Source Amplifier with a Diode-Connected Load**. In digital logic terms, it functions as a specific type of **inverter** (NOT gate), but with a degraded high-output voltage level compared to a standard CMOS inverter.\n\n### 3. Digital / Logic Analysis (Inverter Operation)\nLet's analyze the output voltage $V_{out}$ for different input logic levels:\n\n*   **Case 1: Low Input ($V_{in} \\approx 0$ V)**\n    *   The NMOS transistor $M_1$ is **OFF** because $V_{GS} < V_{th,n}$ (threshold voltage). No current flows through $M_1$.\n    *   Since the branch is open, the current through $M_2$ is also zero ($I_D = 0$).\n    *   For the diode-connected PMOS $M_2$, current flows until the gate-source voltage $V_{SG}$ drops to the threshold voltage $|V_{th,p}|$. At this point, the transistor cuts off.\n    *   $V_{SG} = V_{DD} - V_{out} = |V_{th,p}| \\Rightarrow V_{out} = V_{DD} - |V_{th,p}|$.\n    *   **Result:** The output is **High** (logic '1'), but not a full $V_{DD}$. There is a threshold voltage drop.\n\n*   **Case 2: High Input ($V_{in} \\approx V_{DD}$)**\n    *   The NMOS transistor $M_1$ is **ON** ($V_{GS} = V_{DD} > V_{th,n}$). It creates a low-resistance path from the output node to ground.\n    *   Current flows from $V_{DD}$ through $M_2$ and $M_1$ to ground.\n    *   $M_1$ pulls the output voltage $V_{out}$ down towards 0 V. Assuming $M_1$ is stronger than the load $M_2$, $V_{out}$ will be close to 0 V.\n    *   **Result:** The output is **Low** (logic '0').\n\n**Conclusion:** The circuit inverts the input logic level (High $\\rightarrow$ Low, Low $\\rightarrow$ High). It is a **logic inverter**. Note that unlike a standard CMOS inverter (where the PMOS gate is connected to the input), this inverter has a \"threshold drop\" on the high output level ($V_{OH} = V_{DD} - |V_{th,p}|$).\n\n### 4. Analog / Small-Signal Analysis (Amplifier Operation)\nIn analog circuits, this topology is widely used as a **Common-Source Amplifier with an active load**.\n\n*   **Small-Signal Model:**\n    *   $M_1$ acts as the transconductance amplifier with transconductance $g_{m1}$.\n    *   $M_2$ (diode-connected) acts as a resistor. The small-signal resistance looking into the drain of a diode-connected MOS transistor is $r_{o2} \\parallel \\frac{1}{g_{m2}}$. Since $r_{o2}$ is typically very large, the effective resistance is approximately $\\frac{1}{g_{m2}}$.\n\n*   **Output Resistance ($R_{out}$):**\n    The total output resistance at the node $V_{out}$ is the parallel combination of the output resistance of $M_1$ ($r_{o1}$) and the resistance of the load $M_2$ ($\\approx 1/g_{m2}$).\n    $$R_{out} \\approx r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}} \\approx \\frac{1}{g_{m2}}$$\n\n*   **Voltage Gain ($A_v$):**\n    The voltage gain is given by $A_v = -g_{m1} \\cdot R_{out}$.\n    $$A_v \\approx -g_{m1} \\cdot \\left( \\frac{1}{g_{m2}} \\right) = -\\frac{g_{m1}}{g_{m2}}$$\n\n    Since $g_m \\propto \\sqrt{W/L}$, the gain can be approximated as:\n    $$A_v \\approx -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n**Summary:**\nThe circuit is a **CMOS inverter variant with a diode-connected PMOS load**.\n*   **Function:** Inverter (NOT gate) or Common-Source Amplifier.\n*   **Key Characteristic:** The diode-connected load ($M_2$) provides a non-linear resistance. In digital mode, it limits the high output voltage to $V_{DD} - |V_{thp}|$. In analog mode, it limits the voltage gain to roughly the ratio of the transconductances ($-g_{m1}/g_{m2}$), which is lower than a current-source load but offers better linearity and stability in some contexts.",
        "format": "markdown",
        "sha256": "e2ce04f4588eb3bbf7610b945b6668492a255b21c5458a5b50d4d0006c6200c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain −gm1/gm2 with an appropriate small-signal approximation. The optional large-signal discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 581,
        "output_tokens": 7229,
        "total_tokens": 7810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 581,
        "output_tokens": 7229,
        "total_tokens": 7810,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an analysis of the components and their behavior.\n\n### 1. Component Identification\nThe circuit consists of two MOSFET transistors, labeled $M_1$ and $M_2$, connected in a series configuration between $V_{DD}$ and Ground.\n\n*   **Transistor $M_2$ (Top):**\n    *   **Type:** The arrow on the source terminal (connected to $V_{DD}$) points inward towards the channel. This is the standard symbol for a **PMOS** transistor.\n    *   **Connections:**\n        *   **Source:** Connected to $V_{DD}$.\n        *   **Gate:** Connected to the input voltage $V_{\\text{in}}$.\n        *   **Drain:** Connected to the output node $V_{\\text{out}}$.\n\n*   **Transistor $M_1$ (Bottom):**\n    *   **Type:** Based on its position in a typical CMOS-like structure, this is intended to be an **NMOS** transistor. However, the symbol (solid vertical bar and arrow direction) can be ambiguous.\n        *   If we assume standard **Enhancement-mode NMOS** (common in such diagrams): The arrow on the bulk/substrate would point in.\n        *   If we assume the symbol indicates a **Depletion-mode** device (solid bar often denotes depletion mode in some conventions): The behavior changes.\n    *   **Connections:**\n        *   **Drain:** Connected to the output node $V_{\\text{out}}$.\n        *   **Gate:** Connected to **Ground** ($0\\text{ V}$).\n        *   **Source:** Connected to **Ground** ($0\\text{ V}$).\n\n### 2. Analysis of Transistor $M_1$\nLet's analyze the state of $M_1$ assuming it is an **Enhancement-mode NMOS** transistor (the most common case for this topology):\n*   The Gate voltage $V_G = 0\\text{ V}$.\n*   The Source voltage $V_S = 0\\text{ V}$.\n*   The Gate-Source voltage $V_{GS} = V_G - V_S = 0\\text{ V}$.\n*   For an NMOS transistor to turn on, $V_{GS}$ must be greater than the threshold voltage $V_{th}$ (where $V_{th} > 0$).\n*   Since $V_{GS} = 0 < V_{th}$, transistor **$M_1$ is in the Cutoff region (OFF)**. It acts as an **open circuit** between $V_{\\text{out}}$ and Ground.\n\n*(Note: If $M_1$ were a Depletion-mode NMOS, it would be ON because $V_{GS}=0 > V_{th}$ (where $V_{th} < 0$). In that case, it would act as a load resistor pulling the output down. We will proceed with the standard Enhancement-mode assumption first, as it's the most literal reading of a grounded gate/source.)*\n\n### 3. Circuit Operation (assuming $M_1$ is OFF)\nSince $M_1$ is always OFF (open circuit), the bottom part of the circuit is disconnected. The circuit effectively consists only of the PMOS transistor $M_2$ connected between $V_{DD}$ and $V_{\\text{out}}$.\n\n*   **Case 1: Low Input ($V_{\\text{in}} < V_{DD} - |V_{th,p}|$)**\n    *   The source-gate voltage of $M_2$ is $V_{SG} = V_{DD} - V_{\\text{in}}$.\n    *   Since $V_{SG} > |V_{th,p}|$, transistor **$M_2$ is ON**.\n    *   Current flows from $V_{DD}$ through $M_2$ to the output node $V_{\\text{out}}$.\n    *   Since $M_1$ is OFF (no path to ground), the output voltage $V_{\\text{out}}$ will charge up to **$V_{DD}$**.\n    *   **Result:** $V_{\\text{in}} = \\text{Low} \\rightarrow V_{\\text{out}} = \\text{High} (V_{DD})$.\n\n*   **Case 2: High Input ($V_{\\text{in}} > V_{DD} - |V_{th,p}|$)**\n    *   The source-gate voltage $V_{SG} = V_{DD} - V_{\\text{in}} < |V_{th,p}|$.\n    *   Transistor **$M_2$ is OFF** (Cutoff).\n    *   There is no connection from $V_{DD}$ to $V_{\\text{out}}$.\n    *   There is no connection from $V_{\\text{out}}$ to Ground (since $M_1$ is OFF).\n    *   The output node $V_{\\text{out}}$ is **floating** (high impedance). It would hold its previous charge or be undefined in a real circuit due to leakage.\n    *   **Result:** $V_{\\text{in}} = \\text{High} \\rightarrow V_{\\text{out}} = \\text{Floating}$.\n\n### 4. Alternative Interpretation (PMOS Inverter)\nIf we interpret the symbols strictly based on the arrow direction (both arrows point in, suggesting both are PMOS):\n*   $M_1$ would be a PMOS with Source at $V_{\\text{out}}$, Drain at Ground, and Gate at Ground.\n*   Since Gate and Drain are both grounded ($V_G = V_D = 0$), $M_1$ is a **diode-connected PMOS**.\n*   In this configuration, the circuit acts as a **PMOS Inverter with a diode-connected load**.\n    *   **$V_{\\text{in}} = 0$:** $M_2$ is ON. Current flows to $V_{\\text{out}}$, turning $M_1$ ON. $V_{\\text{out}}$ rises to a high logic level (close to $V_{DD}$).\n    *   **$V_{\\text{in}} = V_{DD}$:** $M_2$ is OFF. $M_1$ pulls $V_{\\text{out}}$ down to ground (until $V_{\\text{out}} = |V_{th,p}|$). $V_{\\text{out}}$ is a low logic level.\n    *   This would function as a valid **Logic Inverter**.\n\n### Summary\nMost likely, this diagram represents a **CMOS inverter structure where the input to the bottom NMOS transistor ($M_1$) is grounded instead of connected to $V_{\\text{in}}$**.\n*   **Function:** Because $M_1$ is grounded ($V_{GS}=0$), it is always **OFF**.\n*   **Behavior:** The circuit acts as a **pull-up circuit** controlled by $M_2$. When $V_{\\text{in}}$ is low, $V_{\\text{out}}$ goes high ($V_{DD}$). When $V_{\\text{in}}$ is high, the output is floating (high impedance). It does not function as a complete logic gate (like an inverter) because it cannot actively pull the output low.",
        "format": "markdown",
        "sha256": "8162d723ce195cad9d4f866c9a273103f6ca127d868132f0964065c287020a4a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer’s alternative interpretation correctly identifies both devices as PMOS and M1 as a diode-connected PMOS load, but its preferred and final analysis treats M1 as an off NMOS and concludes that the output floats. It also misses the central gm/gm gain or current-balance explanation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1374,
        "output_tokens": 20902,
        "total_tokens": 22276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1374,
        "output_tokens": 20902,
        "total_tokens": 22276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Component Identification\nThe circuit consists of two MOSFET transistors, labeled $M_1$ and $M_2$, connected in series between the supply voltage $V_{DD}$ and ground.\n\n*   **Transistor $M_2$ (Top):**\n    *   **Type:** The arrow on the source terminal (connected to $V_{DD}$) points inward towards the channel. This is the standard symbol for a **PMOS** transistor.\n    *   **Connections:**\n        *   **Source:** Connected to $V_{DD}$.\n        *   **Gate:** Connected to the input voltage $V_{in}$.\n        *   **Drain:** Connected to the output node $V_{out}$.\n    *   **Role:** This acts as the input switch or driver transistor.\n\n*   **Transistor $M_1$ (Bottom):**\n    *   **Type:** The arrow on the top terminal (connected to $V_{out}$) points inward. This indicates it is also a **PMOS** transistor. (Note: In some schematic styles, if this were an NMOS, the arrow would point outward or be on the substrate pointing in. However, given the arrow direction and typical circuit topologies, treating it as a PMOS makes the circuit functional. If it were an NMOS with Gate grounded, it would be permanently OFF).\n    *   **Connections:**\n        *   **Source:** The top terminal (higher potential side) is connected to $V_{out}$.\n        *   **Drain:** The bottom terminal is connected to Ground.\n        *   **Gate:** Connected to Ground.\n    *   **Configuration:** Since the Gate and the Drain (bottom terminal) are both connected to Ground, they are shorted together. This is a **diode-connected** transistor configuration. Specifically, it's a diode-connected PMOS acting as an active load (current sink).\n\n### 2. Circuit Operation Analysis\nThe circuit can be analyzed by looking at the behavior for different input voltage levels ($V_{in}$). Let $|V_{tp}|$ be the threshold voltage magnitude for the PMOS transistors.\n\n**Case 1: Low Input ($V_{in} \\approx 0$ V)**\n*   **$M_2$ (PMOS Driver):** The source-gate voltage is $V_{SG2} = V_{DD} - 0 = V_{DD}$. Since $V_{DD} > |V_{tp}|$, $M_2$ is **ON** (conducting). It allows current to flow from $V_{DD}$ to $V_{out}$.\n*   **$M_1$ (PMOS Load):** As $V_{out}$ rises, the source-gate voltage for $M_1$ becomes $V_{SG1} = V_{out} - 0 = V_{out}$. Once $V_{out} > |V_{tp}|$, $M_1$ turns **ON**. Since it is diode-connected ($V_{SD} = V_{SG}$), it operates in the saturation region and acts as a current sink pulling current from $V_{out}$ to ground.\n*   **Result:** Current flows from $V_{DD}$ through $M_2$ and is sunk by $M_1$. The output voltage $V_{out}$ rises to a high logic level (close to $V_{DD}$, depending on the aspect ratios of the transistors).\n    *   **Logic State:** Input Low $\\rightarrow$ Output High.\n\n**Case 2: High Input ($V_{in} \\approx V_{DD}$)**\n*   **$M_2$ (PMOS Driver):** The source-gate voltage is $V_{SG2} = V_{DD} - V_{DD} = 0$ V. Since $0 < |V_{tp}|$, $M_2$ is **OFF** (cut-off). No current flows from $V_{DD}$.\n*   **$M_1$ (PMOS Load):** With $M_2$ off, there is no source of current to maintain $V_{out}$. $M_1$ (if $V_{out} > |V_{tp}|$) will conduct current from $V_{out}$ to ground, discharging the output node.\n*   **Result:** $V_{out}$ is pulled down to 0 V. Once $V_{out} < |V_{tp}|$, $M_1$ turns OFF, and $V_{out}$ stays at 0 V.\n    *   **Logic State:** Input High $\\rightarrow$ Output Low.\n\n### 3. Conclusion\nThe circuit takes a low input and produces a high output, and takes a high input and produces a low output. Therefore, the circuit functions as a **Logic Inverter (NOT gate)**.\n\nSpecifically, this is a **PMOS inverter with a diode-connected PMOS active load**. While less common than a standard CMOS inverter (which uses an NMOS pull-down and PMOS pull-up), it is a valid logic circuit topology.\n\n*   **Transfer Characteristic:** The output voltage $V_{out}$ is an inverted, scaled version of the input voltage $V_{in}$.\n*   **Function:** $V_{out} = \\text{NOT}(V_{in})$.",
        "format": "markdown",
        "sha256": "47fdcd83b693650f8e34d74034e90f9a7b772cdfce554ef26af176ec1b06a629"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies both devices as PMOS and M1 as a diode-connected PMOS load, but misses the central gm/gm amplifier behavior and gain. The claimed logic inverter and pull-down to 0 V are incorrect; M1 cannot pull the output all the way to ground.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1374,
        "output_tokens": 16916,
        "total_tokens": 18290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15748,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1374,
        "output_tokens": 16916,
        "total_tokens": 18290,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15748,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis.\n\n### 1. Circuit Identification and Components\nThe circuit consists of two MOSFET transistors, labeled $M_1$ and $M_2$, connected in series between a supply voltage $V_{DD}$ and Ground.\n*   **$M_2$ (Top Transistor):** The gate is connected to the input voltage $V_{in}$. The top terminal is connected to $V_{DD}$. The bottom terminal is connected to the output node $V_{out}$.\n*   **$M_1$ (Bottom Transistor):** The gate is connected to Ground (0 V). The bottom terminal is connected to Ground. The top terminal is connected to the output node $V_{out}$.\n\n### 2. Transistor Type Analysis\nThe symbols used for the transistors have an arrow pointing towards the gate/channel. The interpretation depends on the specific schematic convention used:\n*   **Convention A (Bulk Arrow):** An arrow pointing *in* towards the channel indicates an **NMOS** transistor (P-type bulk, N-type channel, arrow points P $\\rightarrow$ N).\n*   **Convention B (Source Arrow):** An arrow on the source terminal pointing *in* towards the channel indicates a **PMOS** transistor (current flows Source $\\rightarrow$ Drain, P $\\rightarrow$ N).\n\nSince both transistors have the same symbol, they are of the same type. We will analyze the two most likely cases.\n\n---\n\n### Case 1: Both Transistors are PMOS (Likely Intended Active Circuit)\nIn many conventions, an arrow pointing in on the source terminal denotes a PMOS transistor. Let's assume $M_1$ and $M_2$ are PMOS.\n\n*   **Transistor $M_2$:**\n    *   **Source:** Connected to $V_{DD}$ (higher potential).\n    *   **Gate:** Connected to $V_{in}$.\n    *   **Drain:** Connected to $V_{out}$.\n    *   This is a **Common-Source** configuration (input at gate, output at drain). It acts as a current source controlled by $V_{in}$.\n    *   $V_{SG2} = V_{DD} - V_{in}$.\n    *   It is ON if $V_{SG2} > |V_{thp}|$, i.e., $V_{in} < V_{DD} - |V_{thp}|$.\n\n*   **Transistor $M_1$:**\n    *   **Source:** Connected to $V_{out}$ (assuming $V_{out} > 0$, this is the higher potential terminal).\n    *   **Gate:** Connected to Ground (0 V).\n    *   **Drain:** Connected to Ground (0 V).\n    *   $V_{SG1} = V_{source} - V_{gate} = V_{out} - 0 = V_{out}$.\n    *   It is ON if $V_{SG1} > |V_{thp}|$, i.e., $V_{out} > |V_{thp}|$.\n    *   Since $V_{SD1} = V_{out} - 0 = V_{out}$ and $V_{SG1} - |V_{thp}| = V_{out} - |V_{thp}|$, the condition $V_{SD} > V_{SG} - |V_{thp}|$ is always met ($V_{out} > V_{out} - |V_{thp}|$). Thus, **$M_1$ is always in saturation** (when ON).\n\n*   **Circuit Operation:**\n    The circuit reaches a steady state where the current flowing through $M_2$ equals the current flowing through $M_1$ ($I_{D2} = I_{D1}$).\n    Assuming both are in saturation and have the same parameters ($k_p = \\mu_p C_{ox} (W/L)$):\n    $$ \\frac{1}{2} k_p (V_{SG2} - |V_{thp}|)^2 = \\frac{1}{2} k_p (V_{SG1} - |V_{thp}|)^2 $$\n    $$ (V_{DD} - V_{in} - |V_{thp}|) = (V_{out} - |V_{thp}|) $$\n    $$ V_{out} = V_{DD} - V_{in} $$\n\n*   **Function:** This circuit acts as a **linear inverter** or a **level shifter**. It produces an output voltage that is the complement of the input voltage relative to $V_{DD}$. If the transistors are matched ($W/L$ ratio is equal), the gain is -1.\n\n---\n\n### Case 2: Both Transistors are NMOS\nIf the arrow pointing in denotes an NMOS transistor (bulk arrow convention):\n\n*   **Transistor $M_1$:**\n    *   **Gate:** 0 V.\n    *   **Source:** 0 V (bottom terminal, lower potential).\n    *   **Drain:** $V_{out}$ (top terminal).\n    *   $V_{GS} = V_G - V_S = 0 - 0 = 0$ V.\n    *   Since $V_{GS} < V_{thn}$, **$M_1$ is in Cutoff (OFF)**. It acts as an open circuit.\n\n*   **Transistor $M_2$:**\n    *   **Drain:** $V_{DD}$ (top terminal, higher potential).\n    *   **Gate:** $V_{in}$.\n    *   **Source:** $V_{out}$ (bottom terminal, lower potential).\n    *   This is a **Common-Drain** configuration, also known as a **Source Follower**.\n\n*   **Circuit Operation:**\n    Since $M_1$ is OFF, no DC current flows to ground ($I_D \\approx 0$). The output node $V_{out}$ is high-impedance.\n    For $M_2$ to conduct, $V_{GS} > V_{thn} \\Rightarrow V_{in} - V_{out} > V_{thn}$.\n    With zero load current, the source voltage $V_{out}$ will charge up until the transistor is at the edge of conduction:\n    $$ V_{GS} = V_{thn} \\Rightarrow V_{in} - V_{out} = V_{thn} $$\n    $$ V_{out} = V_{in} - V_{thn} $$\n\n*   **Function:** This circuit acts as a **voltage buffer** (Source Follower) with a threshold voltage drop. The output follows the input but is shifted down by $V_{th}$.\n\n### Summary\n*   If the transistors are **PMOS**, the circuit is a **linear inverter/level shifter** where $V_{out} \\approx V_{DD} - V_{in}$.\n*   If the transistors are **NMOS**, the bottom transistor is off, and the circuit is a **source follower** where $V_{out} \\approx V_{in} - V_{th}$.\n\nGiven that circuit diagrams in textbooks often test for active feedback loops, the **PMOS interpretation ($V_{out} = V_{DD} - V_{in}$)** is likely the intended analysis for a more complex circuit behavior. However, the **NMOS interpretation** is a standard example of a source follower with a disabled pull-down device.",
        "format": "markdown",
        "sha256": "e936fc3595e0866d01d96cad91b31a08f619a4841ec6b313dc833693fbca3f96"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The PMOS analysis correctly identifies M2 as the common-source input device and M1’s gate and drain tied to ground, and uses current balance to derive the matched-device response. The extra NMOS alternative is unnecessary, but does not replace the correct PMOS interpretation.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1374,
        "output_tokens": 19877,
        "total_tokens": 21251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1374,
        "output_tokens": 19877,
        "total_tokens": 21251,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18219,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the step-by-step analysis to find the output resistance $R_{out}$.\n\n**1. Circuit Identification**\n*   The circuit consists of two transistors, $M_1$ and $M_2$, connected in series between $V_{DD}$ and the output node.\n*   The arrow on the source terminal of both transistors points inwards (towards the channel), which indicates they are **PMOS transistors**.\n*   $M_2$ has its source connected to $V_{DD}$ and gate to $V_{b2}$. It acts as a current source load.\n*   $M_1$ has its source connected to node $X$ (drain of $M_2$) and gate to $V_{b1}$. It acts as a cascode transistor.\n*   The output resistance $R_{out}$ is being measured looking into the drain of $M_1$ (the bottom terminal).\n\n**2. Small-Signal Analysis**\nTo find $R_{out}$, we perform a small-signal analysis. We set all DC voltage sources ($V_{DD}$, $V_{b1}$, $V_{b2}$) to AC ground.\n*   **Node $X$ (Source of $M_1$, Drain of $M_2$):**\n    *   Looking up into $M_2$: The source of $M_2$ is at $V_{DD}$ (AC ground) and the gate is at $V_{b2}$ (AC ground). Since $v_{sg2} = 0$, the dependent current source $g_{m2}v_{sg2}$ is zero. Thus, $M_2$ appears as just its output resistance, $r_{o2}$, connected from node $X$ to ground.\n    *   So, the resistance at the source of $M_1$ (node $X$) is $R_S = r_{o2}$.\n\n*   **Transistor $M_1$:**\n    *   The gate of $M_1$ is at $V_{b1}$ (AC ground).\n    *   The source of $M_1$ is connected to a resistance $R_S = r_{o2}$ to ground.\n    *   We are looking into the drain of $M_1$.\n\n**3. Calculating $R_{out}$**\nThis configuration is equivalent to a MOSFET ($M_1$) with source degeneration resistance $R_S = r_{o2}$. The output resistance looking into the drain of a MOSFET with a source degeneration resistor $R_S$ is given by the formula:\n\n$$R_{out} = r_{o1} + (1 + g_{m1}r_{o1})R_S$$\n\nSubstituting $R_S = r_{o2}$:\n\n$$R_{out} = r_{o1} + (1 + g_{m1}r_{o1})r_{o2}$$\n\nExpanding this expression:\n$$R_{out} = r_{o1} + r_{o2} + g_{m1}r_{o1}r_{o2}$$\n\nTypically, the term $g_{m1}r_{o1}$ is much greater than 1 ($g_{m1}r_{o1} \\gg 1$), so the expression can be approximated as:\n\n$$R_{out} \\approx g_{m1}r_{o1}r_{o2}$$\n\n**Final Answer:**\nThe output resistance is:\n$$R_{out} = r_{o1} + (1 + g_{m1}r_{o1})r_{o2}$$\nor approximately **$R_{out} \\approx g_{m1}r_{o1}r_{o2}$**.\n\n*(Note: If body effect is considered for $M_1$, the transconductance $g_{m1}$ would be replaced by $g_{m1} + g_{mb1}$.)*",
        "format": "markdown",
        "sha256": "d1b8356e9790937f03f2ca646aeda36a3b6a85dbe87d1f177fc34a057a36fdbe"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M1 as the cascode device, and gives the full expression without optional body effect and the correct approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2138,
        "output_tokens": 11482,
        "total_tokens": 13620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2138,
        "output_tokens": 11482,
        "total_tokens": 13620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10592,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To find the output resistance $R_{out}$ looking into the bottom terminal (source of $M_1$), we analyze the small-signal equivalent circuit.\n\n**1. Identify Transistor Types and Connections:**\n*   **$M_2$:** The source is connected to $V_{DD}$. The arrow points inwards, which is typical for the bulk connection in some symbols, but given the connection to $V_{DD}$, $M_2$ is likely a **PMOS** transistor acting as a current source load. Its source is at $V_{DD}$ (AC ground), gate is at $V_{b2}$ (AC ground), and drain is at node $X$.\n*   **$M_1$:** The drain is connected to node $X$, and the source is the output terminal. The arrow points inwards, consistent with an **NMOS** transistor (bulk at ground). Its gate is at $V_{b1}$ (AC ground).\n\n**2. Small-Signal Model:**\n*   **DC Voltage Sources:** $V_{DD}$, $V_{b1}$, and $V_{b2}$ are AC grounds.\n*   **Transistor $M_2$ (PMOS):** Since the source ($V_{DD}$) and gate ($V_{b2}$) are at AC ground, the small-signal source-gate voltage $v_{sg2} = 0$. The dependent current source $g_{m2}v_{sg2} = 0$. The bulk is connected to $V_{DD}$ (AC ground), so there is no body effect. Looking up from node $X$, we see the output resistance of $M_2$, which is **$r_{o2}$**.\n*   **Transistor $M_1$ (NMOS):**\n    *   Gate is at AC ground ($v_{g1} = 0$).\n    *   Bulk is at AC ground ($v_{b1} = 0$).\n    *   Drain is at node $X$, which is connected to ground via $r_{o2}$. So, the resistance at the drain of $M_1$ is $R_D = r_{o2}$.\n    *   Source is the output terminal where we apply a test voltage $v_x$.\n\n**3. Calculation of $R_{out}$:**\nWe want to find the resistance looking into the source of $M_1$ with a drain resistance $R_D = r_{o2}$.\nLet's apply a test voltage $v_x$ at the source terminal (output node) and measure the current $i_x$ flowing into it.\n\n*   $v_{gs1} = v_g - v_s = 0 - v_x = -v_x$.\n*   $v_{bs1} = v_b - v_s = 0 - v_x = -v_x$.\n*   The dependent current source in $M_1$ (flowing from drain to source) is $g_{m1}v_{gs1} + g_{mb1}v_{bs1} = -(g_{m1} + g_{mb1})v_x$.\n\nLet $v_d$ be the voltage at node $X$ (drain of $M_1$).\nApplying KCL at node $X$ (drain of $M_1$):\nThe current leaving through $r_{o2}$ to ground plus the current leaving through the $M_1$ branch (drain to source) must sum to zero.\nActually, let's sum currents leaving node $X$:\n$$ \\frac{v_d}{r_{o2}} + \\frac{v_d - v_x}{r_{o1}} + (g_{m1} + g_{mb1})v_{gs\\_effective} = 0 $$\nWait, the dependent source current flows from Drain to Source. Value is $g_m v_{gs} + g_{mb} v_{bs} = -(g_m + g_{mb})v_x$. So current leaving Drain is $-(g_m + g_{mb})v_x$.\n$$ \\frac{v_d}{r_{o2}} + \\frac{v_d - v_x}{r_{o1}} - (g_{m1} + g_{mb1})v_x = 0 $$\n$$ v_d \\left( \\frac{1}{r_{o2}} + \\frac{1}{r_{o1}} \\right) = v_x \\left( \\frac{1}{r_{o1}} + g_{m1} + g_{mb1} \\right) $$\n$$ v_d = v_x \\frac{1/r_{o1} + g_{m1} + g_{mb1}}{1/r_{o2} + 1/r_{o1}} $$\n\nNow, apply KCL at the source node (output terminal, voltage $v_x$):\nThe test current $i_x$ enters the node. It flows up into the transistor branch.\nCurrent flowing from Source to Drain (upwards) through $r_{o1}$ is $\\frac{v_x - v_d}{r_{o1}}$.\nCurrent flowing from Source to Drain through the dependent source is $-(g_{m1}v_{gs1} + g_{mb1}v_{bs1}) = (g_{m1} + g_{mb1})v_x$.\nSo, $i_x = \\frac{v_x - v_d}{r_{o1}} + (g_{m1} + g_{mb1})v_x$.\n\nSubstituting $v_d$:\nAfter simplification (standard derivation for resistance looking into source with drain resistance $R_D$), the result is:\n$$ R_{out} = \\frac{v_x}{i_x} = \\frac{r_{o1} + R_D}{1 + (g_{m1} + g_{mb1})r_{o1}} $$\n\nHere $R_D = r_{o2}$.\n$$ R_{out} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m1} + g_{mb1})r_{o1}} $$\n\n**Approximation:**\nSince typically $(g_{m1} + g_{mb1})r_{o1} \\gg 1$, the expression can be approximated as:\n$$ R_{out} \\approx \\frac{r_{o1} + r_{o2}}{(g_{m1} + g_{mb1})r_{o1}} = \\frac{1}{g_{m1} + g_{mb1}} + \\frac{r_{o2}}{(g_{m1} + g_{mb1})r_{o1}} $$\n\nIf we ignore body effect ($g_{mb1} \\approx 0$) and assume $r_{o1} \\approx r_{o2} \\approx r_o$:\n$$ R_{out} \\approx \\frac{2r_o}{g_{m1}r_o} = \\frac{2}{g_{m1}} $$\nOr more generally, the dominant term is $\\frac{1}{g_{m1} + g_{mb1}}$.\n\n**Final Answer:**\nThe output resistance is given by:\n$$ R_{out} = \\frac{r_{o1} + r_{o2}}{1 + (g_{m1} + g_{mb1})r_{o1}} $$\nor approximately\n$$ R_{out} \\approx \\frac{1}{g_{m1} + g_{mb1}} + \\frac{r_{o2}}{(g_{m1} + g_{mb1})r_{o1}} $$",
        "format": "markdown",
        "sha256": "194e29495d5fe6f7e5b213f832b4dacacde8be0b603e53c55e1523a54c31d94b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It misidentifies M1 as an NMOS and places the output at its source, so it derives a low source-input resistance rather than the PMOS cascode output resistance, approximately gm1·ro1·ro2. It gets only minimal credit for recognizing M2 as a bias device and applying some small-signal reasoning.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2138,
        "output_tokens": 16443,
        "total_tokens": 18581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2138,
        "output_tokens": 16443,
        "total_tokens": 18581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14777,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, we can identify the configuration and analyze it to find the output resistance $R_{out}$.\n\n**1. Circuit Identification:**\n*   The circuit consists of two transistors, $M_1$ and $M_2$, connected in series between $V_{DD}$ and the output node.\n*   The arrows on the transistors point inwards towards the channel. In many schematic conventions (and consistent with the connection to $V_{DD}$ at the top), this indicates **PMOS** transistors. For a PMOS transistor, the source is at the higher potential.\n    *   $M_2$: Source is connected to $V_{DD}$, Drain is at node $X$, Gate is at $V_{b2}$.\n    *   $M_1$: Source is connected to node $X$, Drain is at the output node, Gate is at $V_{b1}$.\n*   This configuration is a **PMOS Cascode Current Source**. $M_2$ acts as the input current source (biased by $V_{b2}$), and $M_1$ acts as the cascode transistor (biased by $V_{b1}$) to increase the output resistance.\n\n**2. Small-Signal Analysis:**\nTo find the output resistance $R_{out}$, we apply a test voltage $V_t$ at the output node (drain of $M_1$) and calculate the resulting current $I_t$. All DC voltage sources ($V_{DD}, V_{b1}, V_{b2}$) are set to AC ground (0 V).\n\n*   **Transistor $M_2$:**\n    *   Source is at AC ground ($V_{DD}$).\n    *   Gate is at AC ground ($V_{b2}$).\n    *   Therefore, $V_{SG2} = 0$ (AC). The dependent current source $g_{m2}V_{SG2}$ is zero.\n    *   $M_2$ appears as just its output resistance $r_{o2}$ connected from node $X$ to ground.\n\n*   **Transistor $M_1$:**\n    *   Gate is at AC ground ($V_{b1}$).\n    *   Source is at node $X$ (voltage $v_x$).\n    *   Drain is at the output node (voltage $v_t$).\n    *   The resistance looking into the source of $M_1$ (towards node $X$) is loaded by $r_{o2}$.\n\n**3. Derivation of $R_{out}$:**\nThe circuit is a cascode structure. The output resistance looking into the drain of the cascode transistor ($M_1$) with a load resistance $R_L$ at its source is given by the formula:\n$$R_{out} \\approx (g_{m1} r_{o1}) R_L$$\nwhere $R_L$ is the resistance at the source of $M_1$, which is the output resistance of $M_2$, i.e., $R_L = r_{o2}$.\n\nMore precisely, including the body effect of $M_1$ (since its source potential $v_x$ varies and bulk is at $V_{DD}$ which is AC ground, creating a $V_{SB}$ effect):\nThe resistance looking into the drain of $M_1$ is:\n$$R_{out} = r_{o1} + R_L + (g_{m1} + g_{mb1}) r_{o1} R_L$$\nSubstituting $R_L = r_{o2}$:\n$$R_{out} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$\n\nSince typically $(g_{m1} + g_{mb1}) r_{o1} r_{o2} \\gg r_{o1} + r_{o2}$, the expression simplifies to:\n$$R_{out} \\approx (g_{m1} + g_{mb1}) r_{o1} r_{o2}$$\n\nIf the body effect is neglected ($g_{mb1} \\approx 0$):\n$$R_{out} \\approx g_{m1} r_{o1} r_{o2}$$\n\n**Answer:**\nThe output resistance $R_{out}$ is approximately **$g_{m1} r_{o1} r_{o2}$** (or more accurately $(g_{m1} + g_{mb1}) r_{o1} r_{o2}$).\n\n$$R_{out} \\simeq g_{m1} r_{o1} r_{o2}$$",
        "format": "markdown",
        "sha256": "c6851cc6872c10787382add2144fe11a5813598c553f32a3d421cf7c13bacd3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS and M1 as the cascode device, and gives the full output-resistance expression and its appropriate approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2138,
        "output_tokens": 21780,
        "total_tokens": 23918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2138,
        "output_tokens": 21780,
        "total_tokens": 23918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20742,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To ensure that transistor $M_2$ is in saturation, we need to analyze the voltage conditions for a PMOS transistor operating in the saturation region.\n\n**1. Identify Transistor Type and Terminals**\n*   $M_2$ is a **PMOS** transistor (indicated by the arrow pointing inwards on the source side, or typically by the source being at the higher potential $V_{DD}$).\n*   **Source ($S$):** Connected to $V_{DD}$.\n*   **Gate ($G$):** Connected to bias voltage $V_{b2}$.\n*   **Drain ($D$):** Connected to node $X$ (voltage $V_X$).\n\n**2. Condition for PMOS Saturation**\nFor a PMOS transistor to be in saturation, the source-drain voltage ($V_{SD}$) must be greater than or equal to the overdrive voltage ($V_{SG} - |V_{THP}|$).\nThe mathematical condition is:\n$$V_{SD} \\ge V_{SG} - |V_{THP}|$$\n\nWhere:\n*   $V_{SD} = V_S - V_D = V_{DD} - V_X$\n*   $V_{SG} = V_S - V_G = V_{DD} - V_{b2}$\n*   $|V_{THP}|$ is the magnitude of the threshold voltage for the PMOS transistor.\n\n**3. Derive the Voltage Constraint at Node X**\nSubstitute the voltage expressions into the saturation condition:\n$$(V_{DD} - V_X) \\ge (V_{DD} - V_{b2}) - |V_{THP}|$$\n\nSubtract $V_{DD}$ from both sides:\n$$-V_X \\ge -V_{b2} - |V_{THP}|$$\n\nMultiply by -1 (and flip the inequality sign):\n$$V_X \\le V_{b2} + |V_{THP}|$$\n\n**Conclusion:**\nTo ensure $M_2$ is in saturation, the voltage at node **$X$ ($V_X$) must be less than or equal to $V_{b2} + |V_{THP}|$**.\n\n**Practical Implementation (Biasing):**\nNode $X$ is the source of transistor $M_1$. The voltage at $X$ is determined by the bias voltage $V_{b1}$ and the source-gate voltage of $M_1$ ($V_{SG1}$):\n$$V_X = V_{b1} + V_{SG1}$$\n\nSubstituting this into our condition:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{THP}|$$\n\nRearranging for $V_{b2}$:\n$$V_{b2} \\ge V_{b1} + (V_{SG1} - |V_{THP}|)$$\n\nSince $(V_{SG1} - |V_{THP}|)$ is the overdrive voltage of $M_1$ (let's call it $V_{OV1}$), the condition becomes:\n$$V_{b2} \\ge V_{b1} + V_{OV1}$$\n\n**Summary:**\nYou ensure $M_2$ is in saturation by setting the bias voltage **$V_{b2}$ sufficiently high** (closer to $V_{DD}$) relative to $V_{b1}$. Specifically, $V_{b2}$ must be at least equal to $V_{b1}$ plus the overdrive voltage of $M_1$. Alternatively, you can say you must ensure the voltage at node $X$ does not exceed $V_{b2} + |V_{THP}|$.",
        "format": "markdown",
        "sha256": "1a63ba05f82a7d07808ef3d7017031705a5773f42591557dc0cde44a230ee688"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the PMOS saturation condition for M2, relates VX to Vb1 through M1, and derives the equivalent bias constraint Vb2 − Vb1 ≥ M1’s overdrive (assuming equal thresholds).",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2106,
        "output_tokens": 8739,
        "total_tokens": 10845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2106,
        "output_tokens": 8739,
        "total_tokens": 10845,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7923,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the step-by-step analysis to ensure that transistor $M_2$ is in saturation.\n\n### 1. Identify Transistor Types and Connections\nFirst, let's identify the type of transistors and their terminals.\n*   The symbol shows an arrow pointing **inward** towards the channel on the source terminal. This is the standard symbol for a **PMOS transistor**.\n*   **$M_2$ (Top Transistor):**\n    *   **Source ($S$):** Connected to $V_{DD}$ (top terminal with the arrow).\n    *   **Gate ($G$):** Connected to bias voltage $V_{b2}$.\n    *   **Drain ($D$):** Connected to node $X$.\n*   **$M_1$ (Bottom Transistor):**\n    *   **Source ($S$):** Connected to node $X$ (top terminal with the arrow).\n    *   **Gate ($G$):** Connected to bias voltage $V_{b1}$.\n    *   **Drain ($D$):** Connected to the bottom terminal (where $R_{out}$ is measured).\n\nCurrent flows from $V_{DD}$ down through $M_2$ and $M_1$ to the bottom node.\n\n### 2. Saturation Condition for a PMOS Transistor\nFor a PMOS transistor to operate in the saturation (active) region, the source-drain voltage ($V_{SD}$) must be greater than or equal to the overdrive voltage ($V_{OV} = V_{SG} - |V_{th}|$).\n\nThe condition is:\n$$V_{SD} \\ge V_{SG} - |V_{th}|$$\n\nAlternatively, this can be expressed in terms of the drain voltage ($V_D$). Rearranging the inequality ($V_S - V_D \\ge V_S - V_G - |V_{th}|$), we get:\n$$V_D \\le V_G + |V_{th}|$$\n\nThis means the drain voltage must be sufficiently low (close to ground) relative to the gate voltage to keep the transistor in saturation.\n\n### 3. Apply Condition to $M_2$\nFor transistor $M_2$:\n*   $V_S = V_{DD}$\n*   $V_G = V_{b2}$\n*   $V_D = V_X$ (voltage at node $X$)\n*   $|V_{th}| = |V_{th2}|$ (threshold voltage magnitude of $M_2$)\n\nSubstituting these into the saturation condition ($V_D \\le V_G + |V_{th}|$):\n$$V_X \\le V_{b2} + |V_{th2}|$$\n\nThis is the fundamental requirement: **The voltage at node $X$ must be less than or equal to $V_{b2} + |V_{th2}|$.**\n\n### 4. Relate to Circuit Biasing ($V_{b1}$)\nThe voltage at node $X$ is determined by the lower transistor $M_1$. Since $X$ is the source of $M_1$:\n$$V_X = V_{S1} = V_{G1} + V_{SG1} = V_{b1} + V_{SG1}$$\n(where $V_{SG1}$ is the source-gate voltage of $M_1$, which must be $> |V_{th1}|$ for $M_1$ to be on).\n\nSubstituting this expression for $V_X$ into our saturation condition for $M_2$:\n$$V_{b1} + V_{SG1} \\le V_{b2} + |V_{th2}|$$\n\nRearranging to solve for the relationship between the bias voltages:\n$$V_{b2} \\ge V_{b1} + V_{SG1} - |V_{th2}|$$\n\n### Conclusion\nTo ensure that $M_2$ is in saturation, you must **set the bias voltages $V_{b1}$ and $V_{b2}$ such that the voltage at node $X$ is sufficiently low.**\n\nSpecifically:\n1.  **Voltage Headroom:** The voltage drop across $M_2$ ($V_{SD2} = V_{DD} - V_X$) must be at least equal to its overdrive voltage ($V_{SG2} - |V_{th2}|$).\n2.  **Bias Relationship:** The bias voltage $V_{b2}$ must be sufficiently higher than $V_{b1}$. Since these are PMOS gates, a higher voltage means a smaller $V_{SG}$ (less current), but it raises the maximum allowed drain voltage. You need $V_{b2}$ to be large enough so that the \"saturation boundary\" ($V_{b2} + |V_{th2}|$) is above the actual voltage at node $X$ ($V_{b1} + V_{SG1}$).\n\nIn short, ensure that **$V_X \\le V_{b2} + |V_{th2}|$**. This is typically achieved by designing the bias circuit such that $V_{b2} - V_{b1} \\ge V_{SG1} - |V_{th2}|$ (which roughly means $V_{b2} > V_{b1}$ if threshold voltages are similar).",
        "format": "markdown",
        "sha256": "eaeb4fbd9f240d5a80c9aab24b461a3cb740b5f086347ba466bf61478b7c8511"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses VX = Vb1 + VSG1 to derive the equivalent bias condition Vb2 − Vb1 ≥ VSG1 − |Vth2|.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2106,
        "output_tokens": 11860,
        "total_tokens": 13966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2106,
        "output_tokens": 11860,
        "total_tokens": 13966,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10691,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, here is the step-by-step analysis to ensure that transistor $M_2$ is in saturation.\n\n### 1. Identify Transistor Types\nThe circuit shows two transistors, $M_1$ and $M_2$, connected in series between $V_{DD}$ and the output node.\n*   The arrow on the transistor symbol points inward (towards the channel), and the source of the top transistor ($M_2$) is connected to the highest potential ($V_{DD}$). This indicates that **$M_1$ and $M_2$ are PMOS transistors**.\n*   Current flows from $V_{DD}$ down through $M_2$ and $M_1$.\n\n### 2. Condition for PMOS Saturation\nFor a PMOS transistor to be in the saturation region, the source-drain voltage ($V_{SD}$) must be greater than or equal to the overdrive voltage ($V_{SG} - |V_{th}|$).\nThe condition is:\n$$V_{SD} \\ge V_{SG} - |V_{th}|$$\n\nAlternatively, this can be written in terms of the drain voltage ($V_D$) and gate voltage ($V_G$):\n$$V_D \\le V_G + |V_{th}|$$\n*(Derivation: $V_S - V_D \\ge V_S - V_G - |V_{th}| \\Rightarrow -V_D \\ge -V_G - |V_{th}| \\Rightarrow V_D \\le V_G + |V_{th}|$)*\n\n### 3. Apply Condition to $M_2$\nFor transistor $M_2$:\n*   Source ($S_2$) = $V_{DD}$\n*   Gate ($G_2$) = $V_{b2}$\n*   Drain ($D_2$) = Node $X$ ($V_X$)\n\nSubstituting these into the saturation condition ($V_{D2} \\le V_{G2} + |V_{th2}|$):\n$$V_X \\le V_{b2} + |V_{th2}|$$\n\nThis means the voltage at node $X$ must not exceed $V_{b2} + |V_{th2}|$.\n\n### 4. Analyze Node $X$ (Voltage at the Source of $M_1$)\nNode $X$ is the source of transistor $M_1$. For $M_1$ to be conducting (and typically operating in saturation as part of a cascode structure), its source voltage $V_X$ is determined by its gate bias $V_{b1}$ and its source-gate voltage $V_{SG1}$.\n$$V_X = V_{S1} = V_{G1} + V_{SG1} = V_{b1} + V_{SG1}$$\n\nSince $M_1$ is in saturation (assumed for proper current source operation), $V_{SG1} = |V_{th1}| + V_{OV1}$, where $V_{OV1}$ is the overdrive voltage of $M_1$.\nSo,\n$$V_X = V_{b1} + |V_{th1}| + V_{OV1}$$\n\n### 5. Combine Conditions to Find the Requirement\nSubstitute the expression for $V_X$ back into the saturation condition for $M_2$:\n$$V_{b1} + |V_{th1}| + V_{OV1} \\le V_{b2} + |V_{th2}|$$\n\nRearranging for $V_{b2}$:\n$$V_{b2} \\ge V_{b1} + V_{OV1} + (|V_{th1}| - |V_{th2}|)$$\n\nAssuming the threshold voltages are similar ($|V_{th1}| \\approx |V_{th2}|$), the condition simplifies to:\n$$V_{b2} \\ge V_{b1} + V_{OV1}$$\n\n### Conclusion\nTo ensure $M_2$ is in saturation, you must satisfy the following conditions:\n\n1.  **Bias Voltage Relationship:** The bias voltage **$V_{b2}$ must be greater than (higher than) $V_{b1}$** by at least the overdrive voltage of $M_1$ ($V_{OV1}$). In PMOS circuits, \"higher\" means closer to $V_{DD}$. So, $V_{b2}$ should be less negative (or closer to $V_{DD}$) than $V_{b1}$.\n    *   Mathematically: **$V_{b2} \\ge V_{b1} + V_{OV1}$**.\n\n2.  **Node Voltage Constraint:** The voltage at node $X$ ($V_X$) must be kept low enough, specifically **$V_X \\le V_{b2} + |V_{th2}|$**.\n\n3.  **Output Voltage Constraint (Implicit):** For $V_X$ to remain stable at the value derived above, $M_1$ must also remain in saturation. This requires the voltage at the bottom node (output) to be sufficiently low:\n    $$V_{out} \\le V_{b1} + |V_{th1}|$$\n    If the output voltage rises too high, $M_1$ enters the triode region, $V_X$ rises, and consequently, $M_2$ is pushed out of saturation.",
        "format": "markdown",
        "sha256": "af3373c54542a7d66ad4df6c92f2ad6f7dcd20d9a3fa7c3cfaeb96746fff03d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and relates VX to Vb1 to derive the equivalent bias requirement Vb2 ≥ Vb1 + VOV1 for matched thresholds. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2106,
        "output_tokens": 12516,
        "total_tokens": 14622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2106,
        "output_tokens": 12516,
        "total_tokens": 14622,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Cascode Amplifier** with a **current-source load**.\n*   **$M_1$**: An NMOS transistor configured as a **Common Source (CS)** amplifier. It takes the input signal $V_{in}$ at its gate.\n*   **$M_2$**: An NMOS transistor configured as a **Common Gate (CG)** amplifier. It acts as the cascode device, connected in series with $M_1$. Its gate is biased by a DC voltage $V_{b1}$.\n*   **$I_1$**: An ideal (or practical) constant current source connected to the supply $V_{DD}$. It acts as the active load for the amplifier.\n*   **$V_{out}$**: The output node, taken at the drain of the cascode transistor $M_2$.\n*   **Node X**: The connection point between the drain of $M_1$ and the source of $M_2$.\n\n### 2. DC Analysis (Biasing)\n*   **Current Path**: The constant current $I_1$ flows from $V_{DD}$, through the current source, down through $M_2$ and $M_1$ to ground. Therefore, the drain current for both transistors is fixed at $I_D = I_1$ (assuming both are in saturation).\n*   **Transistor $M_1$**: For $M_1$ to conduct current $I_1$, the input voltage $V_{in}$ (DC component) must be greater than the threshold voltage $V_{th}$. Specifically, $V_{GS1} = V_{in} - 0 = V_{in}$.\n*   **Transistor $M_2$**: For $M_2$ to conduct current and remain in saturation, the bias voltage $V_{b1}$ must be set appropriately.\n    *   $V_{GS2} = V_{b1} - V_X > V_{th}$.\n    *   Saturation condition for $M_2$: $V_{DS2} \\ge V_{GS2} - V_{th} \\Rightarrow (V_{out} - V_X) \\ge (V_{b1} - V_X) - V_{th} \\Rightarrow V_{out} \\ge V_{b1} - V_{th}$.\n*   **Saturation for $M_1$**: $V_{DS1} \\ge V_{GS1} - V_{th} \\Rightarrow V_X \\ge V_{in} - V_{th}$.\n\n### 3. Small-Signal Analysis\nLet's analyze the small-signal behavior to find the voltage gain $A_v = v_{out} / v_{in}$. We assume the current source $I_1$ has a finite output resistance $r_{oI}$ (if ideal, $r_{oI} \\to \\infty$).\n\n**Small-Signal Model:**\n*   **$M_1$**: Transconductance $g_{m1}$, output resistance $r_{o1}$. Input $v_{in}$ at gate, source at ground.\n*   **$M_2$**: Transconductance $g_{m2}$, output resistance $r_{o2}$. Gate at AC ground ($v_{b1} = 0$), source at node X, drain at $v_{out}$.\n*   **Load**: Resistance $r_{oI}$ from $V_{out}$ to AC ground ($V_{DD}$).\n\n**Derivation:**\n1.  **Output Impedance of the Cascode Stack ($R_{out\\_stack}$)**: Looking down from node $V_{out}$ into the series combination of $M_2$ and $M_1$, the output resistance is approximately:\n    $$R_{out\\_stack} \\approx g_{m2} r_{o2} r_{o1}$$\n    (This is the standard result for a cascode output impedance).\n\n2.  **Total Output Resistance ($R_{out}$)**: The total resistance at the output node $V_{out}$ is the parallel combination of the cascode stack's output resistance and the current source's output resistance ($r_{oI}$).\n    $$R_{out} = R_{out\\_stack} \\parallel r_{oI} \\approx (g_{m2} r_{o2} r_{o1}) \\parallel r_{oI}$$\n\n3.  **Voltage Gain ($A_v$)**: The circuit acts as a transconductance amplifier where the input voltage $v_{in}$ is converted to a current $g_{m1}v_{in}$ by $M_1$. This current flows through the total output resistance $R_{out}$.\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx -g_{m1} R_{out}$$\n    $$A_v \\approx -g_{m1} (g_{m2} r_{o2} r_{o1} \\parallel r_{oI})$$\n\n**Special Case: Ideal Current Source ($r_{oI} \\to \\infty$)**\nIf the current source $I_1$ is ideal (infinite output impedance), then $R_{out} \\approx g_{m2} r_{o2} r_{o1}$.\nThe gain becomes the product of the intrinsic gains of the two transistors:\n$$A_v \\approx -(g_{m1} r_{o1}) (g_{m2} r_{o2})$$\nThis is an extremely high gain.\n\n### 4. Key Characteristics\n*   **High Gain**: As derived, the gain is very large, proportional to the product of $g_m r_o$ values.\n*   **High Output Impedance**: The output impedance at $V_{out}$ is very high (approximately $g_{m2} r_{o2} r_{o1}$ in parallel with $r_{oI}$). This makes the circuit suitable for generating high voltage swings from small current variations.\n*   **Bandwidth Limitation (Miller Effect)**: In a standard cascode amplifier used with a resistive load, the cascode structure mitigates the Miller effect by keeping the gain of the first stage ($M_1$) low (around -1). However, in this specific circuit with a **high-impedance current source load**, the gain from the input ($V_{in}$) to node X is actually high ($\\approx -g_{m1}r_{o1}$). This large voltage swing at node X will multiply the gate-drain capacitance of $M_1$ ($C_{gd1}$) by the Miller effect ($C_{Miller} = C_{gd1}(1 - A_{v1})$), which can significantly reduce the bandwidth of the circuit.\n\n### Summary\nThe circuit is a **high-gain NMOS cascode amplifier**. It converts the input voltage $V_{in}$ into a large output voltage $V_{out}$ with very high output impedance. It is likely used as a high-impedance node in a larger circuit (like a transimpedance amplifier or a high-gain stage in an op-amp), or as a voltage buffer/level shifter if the current source is replaced by a resistive load. Given the ideal current source symbol, it emphasizes the high output impedance and high DC gain properties.",
        "format": "markdown",
        "sha256": "786baf0bc3cab96fa29c624b717fff9f5eaf917236c0bf6f999cfd8bf98e54be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted gain form Av ≈ −gm1Rout with the ideal-current-source limit. The approximate cascode resistance and omitted body-effect factor are allowed simplifications.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1065,
        "output_tokens": 16147,
        "total_tokens": 17212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1065,
        "output_tokens": 16147,
        "total_tokens": 17212,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14516,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Cascode Amplifier** (specifically, a Common-Source followed by a Common-Gate configuration) with an active current load.\n\n*   **$M_1$**: An NMOS transistor configured as a **Common-Source (CS)** amplifier. Its gate is the input ($V_{in}$), and its source is grounded.\n*   **$M_2$**: An NMOS transistor configured as a **Common-Gate (CG)** amplifier. Its gate is connected to a bias voltage ($V_{b1}$), its source is connected to the drain of $M_1$ (node X), and its drain is the output ($V_{out}$).\n*   **$I_1$**: A constant current source acting as an **active load**. It sets the DC bias current for the circuit and provides a high output impedance.\n*   **$V_{b1}$**: A DC bias voltage applied to the gate of $M_2$ to keep it in the saturation region.\n\n### 2. DC Analysis (Biasing)\n*   **Current Path**: The current $I_1$ flows from $V_{DD}$, through the current source, into the drain of $M_2$, through $M_2$ to node X, through $M_1$ to ground. Therefore, the drain currents are equal: $I_{D1} = I_{D2} = I_1$.\n*   **Saturation Conditions**: For the circuit to function as an amplifier, both transistors must be in the saturation region.\n    *   **For $M_1$**: $V_{in} > V_{TH1}$ (threshold voltage) and $V_X \\ge V_{in} - V_{TH1}$.\n    *   **For $M_2$**: $V_{b1} > V_{TH2}$ and $V_{out} - V_X \\ge V_{b1} - V_{TH2}$. The bias voltage $V_{b1}$ is typically set to $V_{TH} + V_{OV} + V_{GS1}$ (where $V_{OV}$ is the overdrive voltage) to ensure $M_2$ stays in saturation while minimizing voltage headroom requirements.\n\n### 3. Small-Signal (AC) Analysis\nThis circuit is widely used in analog integrated circuits due to its excellent performance characteristics.\n\n*   **Input Stage ($M_1$)**:\n    *   The input voltage $v_{in}$ creates a small-signal current at the drain of $M_1$: $i_{d1} = g_{m1} v_{in}$.\n    *   The input impedance is extremely high (ideally infinite) because it is connected to the gate of a MOSFET.\n\n*   **Cascode Stage ($M_2$)**:\n    *   $M_2$ acts as a current buffer. The current generated by $M_1$ flows into the source of $M_2$.\n    *   A common-gate stage has a current gain of approximately 1. So, the AC current at the output node (drain of $M_2$) is approximately equal to the current from $M_1$: $i_{out} \\approx g_{m1} v_{in}$.\n    *   This makes the circuit a **Transconductance Amplifier (Gm amplifier)**, converting input voltage to output current. The transconductance is $G_m \\approx g_{m1}$.\n\n*   **Output Impedance ($R_{out}$)**:\n    *   The most significant feature of the cascode configuration is the high output impedance.\n    *   Looking down into the drain of $M_2$, the output resistance is approximately $R_{out, cascode} \\approx (g_{m2} r_{o2}) r_{o1}$, where $r_{o1}$ and $r_{o2}$ are the output resistances of the transistors due to channel-length modulation. This is much higher than a simple common-source stage ($r_{o1}$).\n    *   Looking up, the resistance is the output resistance of the current source $I_1$ (ideally $\\infty$).\n    *   Total output resistance at $V_{out}$ is very high: $R_{out} \\approx R_{out, cascode} || R_{out, I1}$.\n\n*   **Voltage Gain**:\n    *   If a load resistor $R_L$ is connected at $V_{out}$, the voltage gain is $A_v = \\frac{v_{out}}{v_{in}} = -G_m (R_{out, cascode} || R_L)$.\n    *   Since $R_{out, cascode}$ is very large, $A_v \\approx -g_{m1} R_L$. The negative sign indicates a 180° phase shift (inverting amplifier).\n\n### 4. Key Advantages\n1.  **High Bandwidth**: In a simple common-source amplifier, the Miller effect multiplies the gate-drain capacitance ($C_{gd}$) by the voltage gain, reducing bandwidth. In this cascode circuit, the voltage gain at the intermediate node X (drain of $M_1$) is very low (approximately $-1/g_{m2}r_{o1}$ or close to 0 to -1). This minimizes the Miller effect, resulting in a much higher bandwidth.\n2.  **High Output Impedance**: The cascode structure significantly boosts the output impedance, which is useful for high-gain amplifiers and current mirrors.\n3.  **Improved Linearity**: The cascode transistor $M_2$ helps keep the drain voltage of $M_1$ (node X) relatively constant, reducing the variation of $C_{gd1}$ and improving linearity.\n\n### Summary\nThe circuit is an **NMOS Cascode Amplifier**. It takes a voltage input $V_{in}$ at the gate of $M_1$ and produces a current output at $V_{out}$ (proportional to $g_{m1}V_{in}$). It is characterized by high input impedance, very high output impedance, and high bandwidth. It is a fundamental building block in analog IC design, often used as the input stage of operational amplifiers or as a cascode current mirror.",
        "format": "markdown",
        "sha256": "37e0d1cff694af7c654cfdc98e928a24e6586a6c04a6d0df59aa15c7b80d29b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the inverting transconductance-times-output-resistance gain form, meeting the golden full-credit rule. Its claim that node X has a small swing with an ideal current-source load is imprecise, but does not change the score under that rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1065,
        "output_tokens": 11945,
        "total_tokens": 13010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1065,
        "output_tokens": 11945,
        "total_tokens": 13010,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10545,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Cascode Amplifier**.\n*   **$M_1$** acts as a **Common-Source (CS)** amplifier stage.\n*   **$M_2$** acts as a **Common-Gate (CG)** amplifier stage.\n*   Together, they form a **Cascode** configuration, which is widely used in analog integrated circuits to achieve high voltage gain and high output impedance.\n\n### 2. Component Analysis\n*   **$V_{DD}$**: Positive supply voltage.\n*   **$I_1$**: An ideal DC current source that sets the bias current for the circuit and acts as the active load.\n*   **$M_1$ (NMOS)**: The input transistor. Its gate receives the input signal $V_{in}$. Its source is connected to ground.\n*   **$M_2$ (NMOS)**: The cascode transistor. Its gate is connected to a DC bias voltage $V_{b1}$. Its source is connected to the drain of $M_1$ (node X), and its drain is connected to the output node $V_{out}$.\n*   **$V_{out}$**: The output terminal.\n*   **Node X**: The connection point between the drain of $M_1$ and the source of $M_2$.\n\n### 3. DC Analysis (Biasing)\n*   **Current Path**: The current $I_1$ flows from $V_{DD}$, through the current source, through the drain and source of $M_2$, through the drain and source of $M_1$, to ground.\n*   **Current Equality**: Since the transistors are in series and the output terminal $V_{out}$ is open (no DC current flows out), the drain currents are equal:\n    $$I_{D1} = I_{D2} = I_1$$\n*   **Operating Region**: For the circuit to function as an amplifier, both transistors must be in the **saturation region**.\n    *   **For $M_1$**: We need $V_{DS1} \\ge V_{GS1} - V_{th}$. Since $V_{S1} = 0$, $V_{DS1} = V_X$. So, $V_X \\ge V_{in} - V_{th}$. (Note: $V_{in}$ here includes the DC bias component).\n    *   **For $M_2$**: We need $V_{DS2} \\ge V_{GS2} - V_{th}$. Here $V_{D2} = V_{out}$ and $V_{S2} = V_X$. So, $V_{out} - V_X \\ge (V_{b1} - V_X) - V_{th} \\Rightarrow V_{out} \\ge V_{b1} - V_{th}$.\n    *   Also, $M_2$ must be turned on: $V_{GS2} = V_{b1} - V_X > V_{th}$.\n\n### 4. Small-Signal Analysis (AC Analysis)\nLet's analyze the small-signal behavior assuming the transistors are in saturation. Let $g_{m1}, r_{o1}$ be the parameters for $M_1$ and $g_{m2}, r_{o2}$ for $M_2$.\n\n*   **Input Stage ($M_1$)**:\n    *   Input voltage $v_{in}$ is applied to the gate.\n    *   The small-signal current generated is $i_{d1} \\approx g_{m1} v_{in}$.\n    *   This current flows into the source of $M_2$ (node X).\n\n*   **Cascode Stage ($M_2$)**:\n    *   The gate of $M_2$ is at AC ground (since $V_{b1}$ is a constant DC bias).\n    *   This is a Common-Gate configuration. It buffers the output and increases the output impedance.\n    *   The voltage at node X ($v_x$) is determined by the current from $M_1$ and the impedance looking into the source of $M_2$. The impedance looking into the source of a common-gate stage is approximately $1/g_{m2}$.\n    *   So, $v_x \\approx - (g_{m1} v_{in}) \\cdot (r_{o1} || \\frac{1}{g_{m2}}) \\approx - \\frac{g_{m1}}{g_{m2}} v_{in}$ (if $r_{o1}$ is large). More accurately, the gain from input to node X is small: $A_{v1} = \\frac{v_x}{v_{in}} \\approx - \\frac{1}{g_{m2} r_{o1}}$. This small gain is crucial for reducing the Miller effect.\n\n*   **Output Stage**:\n    *   The output voltage $v_{out}$ is developed across the total output impedance.\n    *   The output impedance looking down into the drain of $M_2$ (the cascode output impedance) is approximately:\n        $$R_{out, cascode} \\approx g_{m2} r_{o2} r_{o1}$$\n    *   The load impedance looking up is the output resistance of the current source $I_1$, let's call it $r_{o,I1}$ (or $R_S$). If ideal, $R_S = \\infty$.\n    *   Total load resistance $R_L = R_{out, cascode} || r_{o,I1}$.\n\n*   **Voltage Gain ($A_v$)**:\n    The transconductance of the whole stage is approximately $G_m \\approx g_{m1}$.\n    The voltage gain is:\n    $$A_v = \\frac{v_{out}}{v_{in}} = - G_m \\cdot R_{total\\_load} \\approx - g_{m1} (g_{m2} r_{o2} r_{o1} || r_{o,I1})$$\n    If the current source is ideal ($r_{o,I1} \\to \\infty$):\n    $$A_v \\approx - g_{m1} g_{m2} r_{o2} r_{o1} = - (g_{m1} r_{o1}) (g_{m2} r_{o2})$$\n    This is the product of the intrinsic gains of the two transistors, resulting in a **very high voltage gain**.\n\n### 5. Key Characteristics & Advantages\n1.  **High Voltage Gain**: As derived above, the gain is proportional to the product of the intrinsic gains of $M_1$ and $M_2$. This is much higher than a simple common-source amplifier with a resistive load.\n2.  **High Output Impedance**: The output impedance at $V_{out}$ is very high ($\\approx g_{m2} r_{o2} r_{o1}$). This makes it a good current buffer or a high-gain voltage amplifier stage.\n3.  **Reduced Miller Effect**: In a simple common-source amplifier, the gate-drain capacitance $C_{gd}$ is multiplied by the gain (Miller effect), reducing bandwidth. In this cascode configuration, the voltage gain from the input ($V_{in}$) to the intermediate node (X) is very small (close to 0, specifically $\\approx -1/g_{m2}$). Therefore, the Miller multiplication of $C_{gd1}$ is negligible, leading to a **wider bandwidth** compared to a simple CS amplifier.\n4.  **Input Impedance**: The input impedance at $V_{in}$ is infinite (gate of MOSFET $M_1$).\n\n### Summary\nThis circuit is a **high-gain Cascode Amplifier**. It takes a voltage input $V_{in}$, converts it to a current via $M_1$, and then converts that current back to a voltage at $V_{out}$ with a very large gain factor determined by the output impedance of the cascode stack and the transconductance of $M_1$. It is commonly used as the gain stage in operational amplifiers.",
        "format": "markdown",
        "sha256": "5ee80540e60db79bf0fdbce658029ccf78b10a7bfe2d883529a6f90da827fb30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-load gain expression. This meets the golden solution’s full-credit rule, despite an inaccurate claim that node X swings only slightly.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1065,
        "output_tokens": 12936,
        "total_tokens": 14001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1065,
        "output_tokens": 12936,
        "total_tokens": 14001,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11113,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a **cascode structure** (specifically, a cascode amplifier).\n\nHere is the breakdown of why:\n\n1.  **Two Stages:** The circuit consists of two transistors, $M_1$ and $M_2$, connected in series (stacked).\n2.  **Common-Source Stage ($M_1$):** The bottom transistor $M_1$ has its input signal $V_{in}$ applied to its gate and its source connected to ground. This configuration is known as a **common-source** amplifier.\n3.  **Common-Gate Stage ($M_2$):** The top transistor $M_2$ has its gate connected to a fixed bias voltage $V_{b1}$ (which acts as an AC ground). Its source is connected to the drain of $M_1$, and its drain is connected to the output $V_{out}$. This configuration is known as a **common-gate** amplifier.\n4.  **Cascode Definition:** A cascode amplifier is defined as a two-stage amplifier consisting of a common-source stage followed by a common-gate stage. The purpose of this structure is to improve the bandwidth and output impedance of the amplifier while reducing the Miller effect (capacitance multiplication) that occurs in a single common-source stage.\n\nTherefore, the combination of $M_1$ (common-source) and $M_2$ (common-gate) forms a cascode structure.",
        "format": "markdown",
        "sha256": "1447086d5f12605dda15ccfc046c7e51ebd31246adb36df8ffbd3532eaeccc51"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M1 is a PMOS source follower with its drain grounded, not a common-source stage, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 2552,
        "total_tokens": 3678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 2552,
        "total_tokens": 3678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a **cascode structure** (specifically, a cascode amplifier).\n\nHere is a breakdown of why:\n\n1.  **Transistor $M_1$ (Common-Source Stage):** The input signal $V_{\\text{in}}$ is applied to the gate of transistor $M_1$, and its source is connected to ground. This configuration is known as a **Common-Source (CS)** amplifier.\n2.  **Transistor $M_2$ (Common-Gate Stage):** The drain of $M_1$ is connected to the source of $M_2$. The gate of $M_2$ is connected to a fixed bias voltage $V_{b1}$. This configuration, where the input comes from the source and the gate is at a fixed potential (AC ground), is known as a **Common-Gate (CG)** amplifier.\n3.  **Cascode Combination:** A **cascode** amplifier is defined as a two-stage amplifier consisting of a common-source stage followed by a common-gate stage. The output is taken from the drain of the top transistor ($M_2$).\n\n**Key characteristics of this cascode circuit:**\n*   **High Output Impedance:** The cascode structure significantly increases the output impedance compared to a single common-source stage.\n*   **High Bandwidth:** It mitigates the Miller effect (capacitance multiplication) that occurs in a single common-source amplifier, allowing for higher frequency operation.\n*   **High Gain:** It provides high voltage gain, similar to a common-source amplifier but with better stability and bandwidth.\n\nSo, the combination of the CS stage ($M_1$) and the CG stage ($M_2$) makes this a classic cascode amplifier circuit.",
        "format": "markdown",
        "sha256": "2d4d3359b36f2b37ef6b7f028ad3bde6259e50a999f653734df99c06393d7f5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source stage; M1 is a PMOS source follower with its drain grounded.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3638,
        "total_tokens": 4764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3638,
        "total_tokens": 4764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3258,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit shown in the figure is a **cascode structure** (specifically, an NMOS cascode amplifier).\n\nHere's a breakdown of why:\n\n1.  **Two Transistors in Series:** The circuit consists of two transistors, $M_1$ and $M_2$, connected in series between the output node and ground.\n2.  **Common-Source Stage ($M_1$):** The bottom transistor $M_1$ has its input signal $V_{\\text{in}}$ applied to its gate and its source connected to ground. This configuration is a **Common-Source (CS)** amplifier. It converts the input voltage into a current.\n3.  **Common-Gate Stage ($M_2$):** The top transistor $M_2$ has a fixed DC bias voltage $V_{b1}$ applied to its gate (which acts as an AC ground) and its source connected to the drain of $M_1$. The output is taken from its drain. This configuration is a **Common-Gate (CG)** amplifier.\n4.  **Cascode Definition:** A cascode amplifier is formed by stacking a common-source amplifier ($M_1$) on top of a common-gate amplifier ($M_2$). The purpose of this structure is to increase the output impedance and bandwidth of the amplifier while reducing the Miller effect (capacitance multiplication) that limits the bandwidth of a simple common-source stage.\n\nIn this specific circuit:\n*   $M_1$ is the input transistor (likely NMOS).\n*   $M_2$ is the cascode transistor (likely NMOS), biased by $V_{b1}$ to keep it in the saturation region.\n*   $R_D$ is the load resistor.\n*   $V_{\\text{out}}$ is the output voltage taken at the drain of $M_2$.\n\nSo, the combination of $M_1$ (Common Source) and $M_2$ (Common Gate) makes this a **cascode amplifier**.",
        "format": "markdown",
        "sha256": "1c4fc3e04cee5d566d6ad412ffafa4644bc0cc01018b5a87acc933709420b745"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode and misidentifies M1 as a common-source device. M1 is a PMOS source follower, so the structure lacks the cascode output-resistance boost.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3876,
        "total_tokens": 5002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 3876,
        "total_tokens": 5002,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is less pronounced in a cascode amplifier because **the voltage gain across the critical feedback capacitance is drastically reduced**, even though the overall amplifier gain remains high. Here's a step-by-step breakdown of why:\n\n### 1. What the Miller Effect Does\nIn a single-ended inverting amplifier (common-emitter or common-source), any capacitance bridging the input and output nodes (e.g., $C_\\mu$ in BJTs or $C_{gd}$ in MOSFETs) appears at the input multiplied by:\n$$C_{in,\\text{Miller}} = C_f (1 + |A_{v,\\text{local}}|)$$\nwhere $A_{v,\\text{local}}$ is the voltage gain **across that specific capacitor**. For high-gain stages, this can increase the effective input capacitance by 10×–100×, severely limiting bandwidth and phase margin.\n\n### 2. Cascode Topology Overview\nA cascode stacks two transistors:\n- **Lower transistor**: Common-emitter (BJT) or common-source (MOSFET) → provides current gain.\n- **Upper transistor**: Common-base (BJT) or common-gate (MOSFET) → buffers the lower stage.\n\nThe key connection is that the collector/drain of the lower transistor is tied to the emitter/source of the upper transistor.\n\n### 3. Why the Miller Effect Shrinks\nThe Miller multiplication depends **only on the voltage swing across the feedback capacitor**, not on the overall amplifier gain. In a cascode:\n- The common-base/gate stage presents a **very low input impedance** at its emitter/source terminal.\n- This low impedance **holds the voltage at the lower transistor's collector/drain nearly constant** for AC signals (often called a \"virtual ground\" or low-impedance node).\n- As a result, the AC voltage swing across $C_\\mu$/$C_{gd}$ of the lower transistor is only **~1 V or less**, giving a local voltage gain of roughly $A_{v,\\text{local}} \\approx -1$ (or slightly more negative, but small in magnitude).\n- Plugging into the Miller formula: $C_{in} \\approx C_f(1 + 1) = 2C_f$, instead of $(1 + |A_{v,\\text{total}}|)C_f$.\n\nMeanwhile, the **overall voltage gain** of the cascode is still high because it develops across the upper transistor and the load resistor/capacitance at the final output. The Miller effect simply doesn't \"see\" that gain.\n\n### 4. Practical Implications\n- **Bandwidth**: Input pole moves to much higher frequencies since $C_{in}$ stays small.\n- **Stability**: Reduced feedback capacitance minimizes phase shift and peaking.\n- **High-frequency operation**: Cascode stages are standard in RF, wideband, and precision analog circuits precisely because they suppress Miller multiplication.\n\n### 5. Important Caveat\nThe Miller effect isn't eliminated; it's **confined to a local, low-gain node**. The upper transistor does experience its own Miller effect, but it appears at the output node (which is usually driven by a low-impedance source or loaded by a small capacitance), so it rarely limits bandwidth. Additionally, parasitic capacitances and layout still matter, but the dominant Miller multiplication of a single stage is effectively neutralized.\n\nIn short: **The cascode decouples high overall gain from high gain across the feedback capacitance, which is the root cause of the Miller effect.**",
        "format": "markdown",
        "sha256": "2d137c4fda404e59f1f330f799512f8c0a0815fa2a05c03e0ed3b20f3d4ebaa1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance source node of the common-gate device and the resulting gain across the lower transistor’s Cgd of about −1, so its Miller multiplication is roughly 2 rather than the full-stage gain. The “virtual ground” and absolute swing wording slightly overstate the effect, but the core explanation is sound.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 24,
        "output_tokens": 2033,
        "total_tokens": 2057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1263,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 24,
        "output_tokens": 2033,
        "total_tokens": 2057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1263,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The **Miller effect** refers to the apparent multiplication of a feedback capacitance bridging the input and output of an inverting amplifier. If a capacitor $C_f$ connects the input to the output of a stage with voltage gain $A_v$ (where $A_v < 0$ for inversion), the input sees an equivalent capacitance of:\n$$C_{in,\\text{Miller}} = C_f(1 - A_v) \\approx C_f(1 + |A_v|)$$\nThis artificially inflates the input capacitance, lowering the amplifier's bandwidth and often causing stability issues.\n\n### Why the Cascode Mitigates It\nA cascode amplifier stacks two transistors:\n- **Lower transistor (Q1)**: Common-emitter (BJT) or common-source (MOSFET)\n- **Upper transistor (Q2)**: Common-base or common-gate\n\nThe key to cascode operation is that **Q2 acts as a low-impedance voltage buffer** at the collector/drain of Q1. Here's why this suppresses the Miller effect:\n\n1. **Fixed AC Potential at Q2's Base/Gate**:  \n   Q2's base (or gate) is typically biased through a low-impedance DC source, meaning it sits at a near-constant AC voltage.\n\n2. **Suppressed Voltage Swing at Q1's Collector/Drain**:  \n   Because Q2's emitter/source follows its base/gate voltage (with ~0.7 V or $V_{GS}$ offset), the voltage at Q1's output node is \"locked\" to a nearly constant AC level. It cannot swing significantly even when Q1 tries to amplify.\n\n3. **Gain Across Q1's Feedback Capacitance ≈ −1**:  \n   The voltage gain from Q1's gate/base to Q1's drain/collector is approximately:\n   $$A_{v1} \\approx -g_{m1} \\cdot Z_{in,Q2} \\approx -g_{m1} \\cdot \\frac{1}{g_{m2}} \\approx -1$$\n   (assuming matched transistors and neglecting $r_o$ effects).\n\n4. **Miller Multiplication Factor Drops Dramatically**:  \n   Instead of $(1 + |A_{v,\\text{total}}|)$, the factor becomes $(1 + 1) = 2$. Thus, the physical feedback capacitance ($C_{gd}$ or $C_{\\mu}$) of Q1 appears at the input almost unchanged:\n   $$C_{in} \\approx C_{\\pi} + C_{\\mu}(1 + 1) \\approx C_{\\pi} + 2C_{\\mu}$$\n   compared to $C_{\\pi} + C_{\\mu}(1 + |A_v|)$ in a single stage.\n\n5. **Full Gain Appears Elsewhere**:  \n   The large voltage gain of the cascode is developed across Q2, from its gate/base to the output node. There is typically no significant feedback capacitance bridging those nodes in the same problematic way, so the Miller effect doesn't degrade input performance.\n\n### Summary\nThe cascode **isolates** the input transistor from large output voltage swings by inserting a common-base/gate stage that presents a low, stable impedance at the first transistor's output. This reduces the gain across the feedback capacitance to ~−1, shrinking the Miller multiplication factor from $(1+|A_v|)$ to ~2. The result is a high-gain amplifier with minimal input capacitance, significantly wider bandwidth, and improved reverse isolation.",
        "format": "markdown",
        "sha256": "e8c7b71d0f634ebc1b11849640bda83c81955a88159f44a60581aa0f79d89ab0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the approximately −1 gain from the input transistor’s gate to drain, giving a Miller factor of about 2 rather than the full-stage gain. It somewhat overstates the node as nearly AC-fixed and the capacitance as almost unchanged, but the quantitative explanation is right; the golden solution treats that overstatement as minor.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 24,
        "output_tokens": 2463,
        "total_tokens": 2487,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1700,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 24,
        "output_tokens": 2463,
        "total_tokens": 2487,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1700,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is less pronounced in a cascode configuration because the circuit splits the total voltage gain between two transistors, ensuring that the feedback capacitance of the input transistor sees only a small voltage swing.\n\n### 1. The Miller Effect in a Standard Stage\nIn a standard Common-Emitter (BJT) or Common-Source (MOSFET) amplifier, the feedback capacitance ($C_{\\mu}$ or $C_{gd}$) is connected between the input and the output. If the stage has a high voltage gain ($A_v$), the effective input capacitance is multiplied according to the Miller formula:\n$$C_{in(eff)} = C_{feedback}(1 - A_v)$$\nBecause $A_v$ is typically large and negative, the input capacitance becomes very large, which significantly reduces the amplifier's bandwidth.\n\n### 2. How the Cascode Mitigates the Effect\nA cascode consists of two transistors stacked vertically:\n*   **Bottom Transistor ($Q_1$):** Operates in a Common-Emitter/Source configuration.\n*   **Top Transistor ($Q_2$):** Operates in a Common-Base/Gate configuration.\n\nThe reduction of the Miller effect occurs through the following mechanism:\n\n#### Low Input Impedance of the Top Stage\nThe collector/drain of the bottom transistor ($Q_1$) is connected to the emitter/source of the top transistor ($Q_2$). The input impedance of a Common-Base/Gate stage is extremely low, approximately $1/g_m$. \n\n#### Reduced Gain of the Bottom Transistor\nBecause $Q_1$ is driving this low-impedance load, the voltage gain of $Q_1$ is limited to approximately **-1**. \n$$A_{v1} \\approx -g_{m1} \\times \\frac{1}{g_{m2}} \\approx -1$$\n\n#### Minimal Capacitance Multiplication\nSince the voltage gain across the feedback capacitance of $Q_1$ is only -1, the Miller multiplication factor is minimal:\n$$C_{in(eff)} = C_{\\mu}(1 - (-1)) = 2C_{\\mu}$$\nIn contrast, a single-stage amplifier with a gain of -20 would result in an input capacitance of $21C_{\\mu}$.\n\n### Summary\nWhile the cascode maintains a high total voltage gain (from the base of $Q_1$ to the collector of $Q_2$), it distributes that gain across two stages. By keeping the voltage swing across the feedback capacitance of the input transistor near unity, the cascode prevents the massive increase in input capacitance that limits the speed of standard amplifiers.",
        "format": "markdown",
        "sha256": "d881ea40b141828ba54b1824e175fd984a4f1b28278c60ed33c967bccc61e572"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node, the resulting roughly −1 gain at the input transistor’s drain, and the approximately 2× Miller multiplication. The wording about splitting gain is a minor simplification, not a substantive error.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 24,
        "output_tokens": 2053,
        "total_tokens": 2077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 24,
        "output_tokens": 2053,
        "total_tokens": 2077,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit shown is a **CMOS Common-Source Amplifier with an Active Load** (also known as a current-source load). It is a fundamental building block in analog integrated circuits, often used as a high-gain amplifier stage.\n\n### 2. Component Analysis\nThe circuit consists of two MOSFETs, $M_1$ and $M_2$, and several biasing voltages.\n\n*   **$M_1$ (PMOS Transistor):**\n    *   **Type:** The arrow on the source terminal (connected to $V_{DD}$) points inward towards the channel, indicating a **PMOS** transistor.\n    *   **Connections:**\n        *   **Source:** Connected to $V_{DD}$.\n        *   **Gate:** Connected to a bias voltage $V_{b2}$.\n        *   **Drain:** Connected to the output node $V_{out}$.\n    *   **Role:** Since the gate is at a fixed DC bias $V_{b2}$ and the source is at $V_{DD}$, $M_1$ acts as a **constant current source** (active load). Assuming it is biased in the saturation region, it provides a high output impedance.\n\n*   **$M_2$ (NMOS Transistor):**\n    *   **Type:** The arrow on the bulk/substrate terminal points inward towards the channel (from P-type bulk to N-type channel), indicating an **NMOS** transistor.\n    *   **Connections:**\n        *   **Gate:** Connected to the input signal $V_{in}$.\n        *   **Drain:** Connected to the output node $V_{out}$.\n        *   **Source/Bulk:** The bottom terminal is connected to $V_{b1}$. In this configuration, the source and bulk are typically tied together at $V_{b1}$ to prevent latch-up and eliminate the body effect ($V_{SB} = 0$).\n    *   **Role:** $M_2$ is the **input transistor** (amplifier). With the input at the gate and the source at a fixed bias $V_{b1}$ (which acts as an AC ground), it operates in a **Common-Source** configuration.\n\n### 3. DC Analysis (Operating Point)\nIn DC operation, the current flowing through $M_1$ must equal the current flowing through $M_2$ ($I_{D1} = I_{D2}$).\n\n*   **Current from $M_1$ (PMOS):** Assuming $M_1$ is in saturation, the drain current is determined by the overdrive voltage:\n    $$I_{D1} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{SG1} - |V_{thp}|)^2 (1 + \\lambda_1 V_{SD1})$$\n    Where $V_{SG1} = V_{DD} - V_{b2}$. $M_1$ essentially sets a reference current $I_{REF}$.\n\n*   **Current from $M_2$ (NMOS):** Assuming $M_2$ is in saturation:\n    $$I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{thn})^2 (1 + \\lambda_2 V_{DS2})$$\n    Where $V_{GS2} = V_{in} - V_{b1}$.\n\nThe DC output voltage $V_{out}$ settles at the value where these two currents are equal. This is the quiescent operating point (Q-point).\n\n### 4. Small-Signal (AC) Analysis\nTo analyze the amplification properties, we consider small AC signals around the DC operating point. We assume the bias voltages $V_{b1}$, $V_{b2}$, and $V_{DD}$ are AC grounds (constant DC values).\n\n*   **Model for $M_1$:** Since the gate is at AC ground ($V_{b2}$ is constant), the PMOS transistor $M_1$ behaves like a resistor equal to its output resistance, **$r_{o1}$**, connected between $V_{out}$ and AC ground ($V_{DD}$).\n*   **Model for $M_2$:** The NMOS transistor $M_2$ is modeled as a voltage-controlled current source **$g_{m2}v_{gs2}$** in parallel with its output resistance **$r_{o2}$**.\n    *   Since the source is at AC ground ($V_{b1}$ is constant), $v_{gs2} = v_{in}$.\n    *   The current source pushes current from drain to source proportional to $v_{in}$.\n\n**KCL at the output node ($V_{out}$):**\nThe sum of currents leaving the node is zero.\n$$ \\frac{v_{out}}{r_{o1}} + g_{m2}v_{in} + \\frac{v_{out}}{r_{o2}} = 0 $$\n\nRearranging for the voltage gain $A_v = \\frac{v_{out}}{v_{in}}$:\n$$ v_{out} \\left( \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right) = -g_{m2}v_{in} $$\n$$ v_{out} \\left( r_{o1} \\parallel r_{o2} \\right) = -g_{m2}v_{in} $$\n\n**Voltage Gain:**\n$$ A_v = \\frac{v_{out}}{v_{in}} = -g_{m2} (r_{o1} \\parallel r_{o2}) $$\n\n### Summary\n*   **Function:** Inverting Amplifier.\n*   **Gain:** The gain is determined by the transconductance of the input transistor ($g_{m2}$) and the total output resistance ($r_{o1} \\parallel r_{o2}$). Since $r_{o}$ values are typically large (due to channel length modulation $\\lambda$), this circuit provides **high voltage gain**.\n*   **Output Impedance:** $R_{out} = r_{o1} \\parallel r_{o2}$. This is relatively high, which is characteristic of a common-source amplifier with an active load.",
        "format": "markdown",
        "sha256": "6ee11a3d0360793d7d1a57bf0096d2dce148ecfeb041d92fc0fbf9453f324984"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2's gate and identifies a common-source, inverting stage. The circuit is common-gate with Vin at M2's source, so the topology and gain conclusion are wrong.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 993,
        "output_tokens": 9369,
        "total_tokens": 10362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 993,
        "output_tokens": 9369,
        "total_tokens": 10362,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit.\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Source Amplifier with an Active Load** (specifically, a PMOS current-source load). It is essentially a CMOS inverter (comprising a PMOS transistor $M_1$ and an NMOS transistor $M_2$) that is biased to operate in the linear region, effectively acting as a high-gain inverting amplifier.\n\n### 2. Component Analysis\n\n*   **$M_1$ (PMOS Transistor):**\n    *   **Configuration:** The source is connected to $V_{DD}$, the gate is connected to a DC bias voltage $V_{b2}$, and the drain is connected to the output node $V_{out}$.\n    *   **Role:** Since the gate voltage $V_{b2}$ is constant, $M_1$ acts as a **constant current source** (active load). Assuming $M_1$ is in saturation (which is typical for this configuration), it provides a fixed bias current $I_{D1}$ to the circuit.\n    *   **Small-Signal Model:** For AC analysis, $V_{DD}$ and $V_{b2}$ are AC grounds. Since the source and gate are at AC ground, the transconductance current source ($g_{m1}v_{sg1}$) is zero. $M_1$ appears as its output resistance, **$r_{o1}$**.\n\n*   **$M_2$ (NMOS Transistor):**\n    *   **Configuration:** The gate is connected to the input signal $V_{in}$, the drain is connected to the output node $V_{out}$, and the source/bulk is connected to a bias voltage $V_{b1}$. (Note: The arrow indicates the bulk/substrate connection for an NMOS transistor).\n    *   **Role:** $M_2$ is the amplifying transistor. With the input signal at the gate and the source/bulk at a fixed DC bias $V_{b1}$ (which is an AC ground), $M_2$ operates in a **Common-Source** configuration.\n    *   **Small-Signal Model:** It is characterized by its transconductance **$g_{m2}$** and output resistance **$r_{o2}$**. The input voltage $v_{in}$ controls a current source $g_{m2}v_{in}$.\n\n### 3. DC Analysis (Biasing)\nIn DC operation:\n*   The current flowing through $M_1$ ($I_{D1}$) is determined by the bias voltage $V_{b2}$ and the transistor parameters. Assuming saturation:\n    $$I_{D1} \\approx \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{SG1} - |V_{th,P}|)^2$$\n    where $V_{SG1} = V_{DD} - V_{b2}$.\n*   The current flowing through $M_2$ ($I_{D2}$) must equal $I_{D1}$ in steady state ($I_{D1} = I_{D2}$).\n*   The DC output voltage $V_{out}$ settles at a value where the I-V characteristics of $M_1$ and $M_2$ intersect. This sets the operating point (Q-point) for the amplifier.\n\n### 4. AC / Small-Signal Analysis\nFor small-signal analysis, we treat DC voltage sources ($V_{DD}$, $V_{b1}$, $V_{b2}$) as AC grounds.\n\n*   **Input:** $v_{in}$ is applied to the gate of $M_2$.\n*   **Output:** $v_{out}$ is taken at the common drain node.\n*   **Equivalent Circuit:**\n    *   $M_2$ generates a small-signal current $g_{m2}v_{in}$ flowing from the drain to the source (ground).\n    *   At the output node ($V_{out}$), we see the output resistance of $M_1$ ($r_{o1}$) connected to ground (since $V_{DD}$ is AC ground) and the output resistance of $M_2$ ($r_{o2}$) connected to ground (since the source of $M_2$ is at AC ground $V_{b1}$).\n    *   Therefore, the total resistance at the output node is $R_{out} = r_{o1} \\parallel r_{o2}$.\n\n*   **Voltage Gain ($A_v$):**\n    The output voltage is generated by the current from $M_2$ flowing through the equivalent output resistance.\n    $$v_{out} = - (g_{m2} v_{in}) \\times (r_{o1} \\parallel r_{o2})$$\n    $$A_v = \\frac{v_{out}}{v_{in}} = -g_{m2} (r_{o1} \\parallel r_{o2})$$\n\n### 5. Summary of Function\n*   **Type:** Inverting Amplifier.\n*   **Gain:** The gain is negative (indicating a $180^\\circ$ phase shift between input and output) and is typically very high because the output resistance $(r_{o1} \\parallel r_{o2})$ is large (due to channel length modulation).\n*   **Application:** This circuit is a fundamental building block in analog integrated circuits, often used as the input stage of operational amplifiers (op-amps) or as a high-gain amplifier stage.\n\n**Key Equation:**\n$$A_v \\approx -g_{m2} \\cdot r_{o}$$\n(where $r_o \\approx r_{o1} \\parallel r_{o2}$)",
        "format": "markdown",
        "sha256": "2642536325ba390a60ed1f20aa9102fd3c4ac4e185b0b28fe350b3066f4b574c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage, but the circuit is a common-gate NMOS stage with Vin at M2’s source. Its gain is non-inverting, so the stated topology and gain mechanism are fundamentally wrong.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 993,
        "output_tokens": 10368,
        "total_tokens": 11361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9090,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 993,
        "output_tokens": 10368,
        "total_tokens": 11361,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9090,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification\nThe circuit shown is a **Common-Source Amplifier with an Active Load** (also known as a current-source load). It is essentially a CMOS inverter structure where the input and output biases are set to specific DC voltages ($V_{b1}$, $V_{b2}$) to establish an operating point, and an AC signal ($V_{in}$) is applied to the gate of the bottom transistor.\n\n### 2. Component Analysis\n*   **$M_1$ (Top Transistor):**\n    *   **Type:** **PMOS** transistor. We can identify this because the arrow on the source terminal (connected to $V_{DD}$) points inwards, and it is connected to the positive supply $V_{DD}$.\n    *   **Connections:** Source to $V_{DD}$, Gate to bias voltage $V_{b2}$, Drain to output node $V_{out}$.\n    *   **Function:** Since the gate is connected to a fixed DC bias $V_{b2}$ and the source to $V_{DD}$, $M_1$ operates as a **constant current source** (active load). Assuming it is in saturation, it provides a constant current $I_{D1}$ and presents a high output resistance $r_{o1}$ at the output node.\n\n*   **$M_2$ (Bottom Transistor):**\n    *   **Type:** **NMOS** transistor. Although the symbol is slightly stylized (the arrow points inwards/upwards, which is the standard bulk arrow for an NMOS pointing from the P-substrate to the N-channel), its position at the bottom of the stack connected to a lower potential bias $V_{b1}$ confirms it is an NMOS.\n    *   **Connections:** Gate to input signal $V_{in}$, Drain to output node $V_{out}$, Source/Bulk to bias voltage $V_{b1}$.\n    *   **Function:** $M_2$ acts as the **amplifying transistor** (driver). The input signal $V_{in}$ is applied to its gate. The connection to $V_{b1}$ sets the DC bias for the source (and likely the bulk, to avoid body effect if $V_{b1}$ is ground or a fixed potential). For AC signals, if $V_{b1}$ is a stiff DC source, the source is at AC ground. Thus, $M_2$ is in a **Common-Source** configuration.\n\n### 3. DC Analysis (Operating Point)\n*   The PMOS transistor $M_1$ sets a reference current $I_{ref}$ based on the bias $V_{b2}$.\n    $$I_{D1} \\approx \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{DD} - V_{b2} - |V_{thp}|)^2$$\n*   The NMOS transistor $M_2$ conducts a current $I_{D2}$ determined by $V_{in}$ and $V_{b1}$.\n*   At the output node $V_{out}$, the currents must balance in DC steady state: $I_{D1} = I_{D2}$. This determines the DC output voltage $V_{out, DC}$.\n\n### 4. Small-Signal Analysis (AC Analysis)\nTo find the voltage gain, we look at the small-signal equivalent circuit at the output node $V_{out}$.\n\n*   **Transistor $M_1$ (Load):** Since the gate ($V_{b2}$) and source ($V_{DD}$) are at AC ground (constant DC voltages), the small-signal gate-source voltage $v_{sg1} = 0$. The dependent current source $g_{m1}v_{sg1}$ is zero. $M_1$ appears as its output resistance **$r_{o1}$** connected between $V_{out}$ and AC ground ($V_{DD}$).\n*   **Transistor $M_2$ (Driver):** The source is at AC ground (assuming $V_{b1}$ is a DC bias). The input signal $v_{in}$ is at the gate. $M_2$ appears as a voltage-controlled current source **$g_{m2}v_{in}$** flowing from drain to source, in parallel with its output resistance **$r_{o2}$**.\n\n**KCL at the output node ($V_{out}$):**\nThe sum of currents leaving the node is zero:\n$$ \\frac{v_{out}}{r_{o1}} + \\frac{v_{out}}{r_{o2}} + g_{m2}v_{in} = 0 $$\n\nRearranging for the voltage gain $A_v = \\frac{v_{out}}{v_{in}}$:\n$$ v_{out} \\left( \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} \\right) = -g_{m2}v_{in} $$\n$$ v_{out} \\left( r_{o1} \\parallel r_{o2} \\right) = -g_{m2}v_{in} $$\n\n$$ A_v = \\frac{v_{out}}{v_{in}} = -g_{m2} (r_{o1} \\parallel r_{o2}) $$\n\n### 5. Summary of Characteristics\n*   **Function:** **Inverting Amplifier**. An increase in $V_{in}$ increases the current through $M_2$, pulling $V_{out}$ down.\n*   **Voltage Gain:** $A_v = -g_{m2} (r_{o1} \\parallel r_{o2})$. The gain is high because the output resistance ($r_{o1} \\parallel r_{o2}$) is typically very large (hundreds of k$\\Omega$ to M$\\Omega$).\n*   **Output Impedance:** $R_{out} = r_{o1} \\parallel r_{o2}$. This is the parallel combination of the output resistances of the PMOS load and the NMOS driver.\n*   **Bandwidth:** The bandwidth is limited by the output capacitance (parasitic capacitances at the $V_{out}$ node) and the output resistance ($f_{-3dB} = \\frac{1}{2\\pi R_{out} C_{out}}$).\n\nIn conclusion, this circuit is a high-gain, single-stage **CMOS inverter-based amplifier** (specifically a common-source amplifier with active load), commonly used as a building block in analog integrated circuits (like operational amplifiers).",
        "format": "markdown",
        "sha256": "68bae1e37753256bf92bb9aa0a10edae0db99a324365cc9a22848a0b19533adc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2's gate and identifies a common-source stage, contradicting the essential common-gate topology where Vin is applied at M2's source. Its inversion and gain conclusions therefore do not apply.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 993,
        "output_tokens": 11642,
        "total_tokens": 12635,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 993,
        "output_tokens": 11642,
        "total_tokens": 12635,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10177,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the circuit, we need to identify the number of independent energy storage elements (capacitors) or, more formally, the order of the system's transfer function. This is equivalent to counting the number of independent nodes with time-varying voltages that have capacitance connected to them.\n\nLet's analyze the circuit nodes:\n1.  **Input Node (Gate of $M_1$):** Let's call the voltage at this node $V_1$.\n    *   Connected to $V_{in}$ through resistor $R_S$.\n    *   Connected to ground through capacitor $C_{GS}$.\n    *   Connected to the output node through capacitor $C_{GD}$.\n    *   This is a dynamic node where charge can be stored.\n\n2.  **Output Node (Drain of $M_1$ and Drain of $M_2$):** Let's call the voltage at this node $V_{out}$.\n    *   Connected to the input node ($V_1$) through capacitor $C_{GD}$.\n    *   Connected to ground (Gate of $M_2$) through capacitor $C_{GD2}$.\n    *   Connected to AC ground (Source of $M_2$, which is $V_{DD}$) through capacitor $C_{DB2}$.\n    *   Connected to ground (Bulk of $M_1$) through capacitor $C_{DB}$.\n    *   This is the second dynamic node.\n\nThe other nodes are fixed at AC ground:\n*   Source of $M_1$ is ground.\n*   Gate of $M_2$ is ground.\n*   Source of $M_2$ is $V_{DD}$ (AC ground).\n\nSince there are **two independent nodes** ($V_1$ and $V_{out}$) with capacitances connected, the circuit is described by a system of two differential equations (or two KCL equations in the s-domain). This results in a second-order transfer function $H(s) = \\frac{V_{out}(s)}{V_{in}(s)}$, where the denominator is a polynomial of degree 2 in $s$ (i.e., $as^2 + bs + c$).\n\nThe roots of this denominator polynomial are the poles of the system. Since the polynomial is of degree 2, there are **2 poles**.\n\nThese poles typically correspond to:\n1.  The input time constant involving $R_S$ and the input capacitance (including Miller effect capacitance).\n2.  The output time constant involving the output resistance and the total output capacitance.\n\n**Answer:** 2",
        "format": "markdown",
        "sha256": "5e686f33bc93410fc6ce98a5a95744f525130dc7d20f6218c53bf4e50f5f0a0f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two dynamic nodes—the M1 gate and the output—and assigns the relevant capacitors to them, giving two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 5219,
        "total_tokens": 6678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 5219,
        "total_tokens": 6678,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4647,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the number of poles in the circuit, we can analyze the number of independent energy storage elements (capacitors) or the number of independent nodes with capacitance that affect the circuit's dynamics.\n\n1.  **Identify Capacitors:**\n    The circuit contains the following capacitors:\n    *   $C_{GS}$: Connected between the gate of $M_1$ and ground.\n    *   $C_{GD}$: Connected between the gate of $M_1$ and the drain of $M_1$ (output node).\n    *   $C_{GD2}$: Connected between the gate of $M_2$ (ground) and the drain of $M_2$ (output node). Effectively, this is a capacitor from the output node to ground.\n    *   $C_{DB2}$: Connected between the drain of $M_2$ (output node) and ground.\n    *   $C_{DB}$: Connected between the drain of $M_1$ (output node) and ground.\n\n2.  **Simplify Parallel Capacitors:**\n    The capacitors $C_{GD2}$, $C_{DB2}$, and $C_{DB}$ are all connected between the output node ($V_{out}$) and ground. They can be combined into a single equivalent load capacitor, let's call it $C_L = C_{GD2} + C_{DB2} + C_{DB}$.\n\n3.  **Identify Independent Nodes/Capacitors:**\n    After simplification, the circuit effectively has two main nodes with capacitance:\n    *   **Node 1 (Gate of $M_1$):** Has capacitor $C_{GS}$ to ground and is connected to Node 2 via $C_{GD}$.\n    *   **Node 2 (Output/Drain):** Has the equivalent capacitor $C_L$ to ground and is connected to Node 1 via $C_{GD}$.\n\n    The capacitors form a network: $C_{GS}$ (Node 1 to Ground), $C_{GD}$ (Node 1 to Node 2), and $C_L$ (Node 2 to Ground). This forms a loop of capacitors (Ground $\\rightarrow$ $C_{GS}$ $\\rightarrow$ Node 1 $\\rightarrow$ $C_{GD}$ $\\rightarrow$ Node 2 $\\rightarrow$ $C_L$ $\\rightarrow$ Ground).\n    \n    The number of independent capacitors (and thus the order of the system, which corresponds to the number of poles) is given by the number of capacitors minus the number of independent loops formed solely by capacitors.\n    *   Total capacitors = 3 ($C_{GS}$, $C_{GD}$, $C_L$).\n    *   Independent loops of capacitors = 1.\n    *   Number of independent capacitors = $3 - 1 = 2$.\n\n    Alternatively, looking at the nodal analysis, we have two dynamic variables (voltages at the gate of $M_1$ and the output node). The transfer function $V_{out}/V_{in}$ will be a second-order rational function of $s$ (i.e., the denominator is a quadratic polynomial in $s$). A second-order denominator implies **2 poles**.\n\n**Answer:** 2",
        "format": "markdown",
        "sha256": "1670c9237d1d120063bd6e190ff3ccf0ad5905f762971796478cda47c44440cd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two dynamic nodes—the M1 gate and the output—and assigns the capacitors to the proper nodes, yielding two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 7247,
        "total_tokens": 8706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6537,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 7247,
        "total_tokens": 8706,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6537,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the step-by-step determination of the number of poles:\n\n1.  **Identify the Circuit Topology**: The circuit consists of an NMOS transistor $M_1$ in a common-configuration (source grounded) and a PMOS transistor $M_2$ acting as a load. The input $V_{in}$ is applied to the gate of $M_1$ through a resistor $R_S$. The output $V_{out}$ is taken at the drain node where $M_1$ and $M_2$ meet.\n\n2.  **Identify Capacitive Nodes**: Poles in a circuit are associated with nodes that have capacitance to ground (or other nodes) and resistance, creating RC time constants. Let's identify the essential nodes with capacitance:\n    *   **Node 1 (Gate of $M_1$)**: Let's call the voltage at this node $V_g$.\n        *   Connected to ground via capacitor $C_{GS}$.\n        *   Connected to the output node via capacitor $C_{GD}$.\n        *   Driven by $V_{in}$ through resistor $R_S$.\n    *   **Node 2 (Output / Drain of $M_1$ and $M_2$)**: Let's call this node $V_{out}$.\n        *   Connected to ground via capacitor $C_{DB}$ (drain-bulk capacitance of $M_1$).\n        *   Connected to ground (AC ground, i.e., $V_{DD}$) via capacitor $C_{DB2}$ (drain-bulk capacitance of $M_2$).\n        *   Connected to ground (gate of $M_2$ is grounded) via capacitor $C_{GD2}$ (gate-drain capacitance of $M_2$).\n        *   Connected to the gate of $M_1$ via capacitor $C_{GD}$.\n        *   The load impedance is primarily the output resistance of the transistors ($r_{o1} || r_{o2}$). Note that $M_2$ has its gate and source at AC ground, so it acts essentially as a resistor $r_{o2}$ to ground in small-signal analysis.\n\n3.  **Determine the Order of the System**:\n    We can write the nodal equations for the two main nodes ($V_g$ and $V_{out}$):\n    *   **At Node $V_g$**: $\\frac{V_{in} - V_g}{R_S} = s C_{GS} V_g + s C_{GD} (V_g - V_{out})$\n    *   **At Node $V_{out}$**: $g_{m1} V_g + V_{out} \\left( \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}} + s C_{DB} + s C_{DB2} + s C_{GD2} \\right) + s C_{GD} (V_{out} - V_g) = 0$\n\n    These are two linear equations with two variables ($V_g$ and $V_{out}$) involving the complex frequency variable $s$. Solving for the transfer function $H(s) = V_{out}(s) / V_{in}(s)$ will result in a rational function where the denominator is a polynomial of degree 2 in $s$.\n\n    The denominator polynomial (characteristic equation) will look like $D(s) = a s^2 + b s + c$. The roots of this polynomial are the poles. Since the highest power of $s$ is 2, there are **2 poles**.\n\n    Physically, these correspond to:\n    1.  An **input pole** formed by the source resistance $R_S$ and the input capacitance (which includes $C_{GS}$ and the Miller-multiplied $C_{GD}$).\n    2.  An **output pole** formed by the output resistance ($r_{o1} || r_{o2}$) and the total output capacitance ($C_{DB} + C_{DB2} + C_{GD2} + \\text{Miller effect on } C_{GD}$).\n\nTherefore, the circuit has **2** poles.\n\n**Answer:** 2",
        "format": "markdown",
        "sha256": "1919fe55d4e96786befcb009af073642f541c89651dc03ac9037cac5dc759447"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two capacitive nodes—the M1 gate and output—and assigns the relevant capacitors to them, concluding that the circuit has two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 7312,
        "total_tokens": 8771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1459,
        "output_tokens": 7312,
        "total_tokens": 8771,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6383,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification and Components\nThe circuit consists of the following components:\n*   **Power Supply:** $V_{DD}$ (positive voltage supply).\n*   **Resistor:** $R_D$, acting as a pull-up load resistor connected to $V_{DD}$.\n*   **Transistors:** Two NMOS transistors, labeled $M_1$ and $M_2$. The broken line in the channel symbol indicates they are **enhancement-mode** NMOS transistors. The arrow pointing outwards confirms they are NMOS.\n\n### 2. Circuit Topology and Connections\n*   **Input ($V_{in}$):** The input voltage $V_{in}$ is connected to the **gate** of transistor $M_1$.\n*   **Gate Connection of $M_2$:** Looking closely at the wiring, the gate of $M_2$ is connected via a wire that goes left and down to the same node as the gate of $M_1$ and $V_{in}$. Therefore, **$V_{G1} = V_{G2} = V_{in}$**. Both transistors are driven by the same input signal.\n*   **Series Connection (Stack):** The source of $M_1$ is connected to ground. The drain of $M_1$ is connected to the source of $M_2$. This places the two transistors in **series** (a stack).\n*   **Output ($V_{out}$):** The output is taken at the drain of $M_2$, which is connected to $V_{DD}$ through the resistor $R_D$.\n\n### 3. Circuit Function: NMOS Inverter with Series Load\nThis circuit configuration is essentially a **digital logic inverter** (NOT gate), specifically an **NMOS inverter with a stacked enhancement-mode load**.\n\nIt can be viewed as a 2-input **NAND gate** where the two inputs are tied together ($V_{in1} = V_{in2} = V_{in}$). Since $\\text{NAND}(A, A) = \\text{NOT}(A)$, the function is inversion.\n\n**Operation Analysis:**\n\n*   **Case 1: Low Input ($V_{in} < V_{th}$)**\n    *   Since $V_{in}$ is less than the threshold voltage ($V_{th}$) of the NMOS transistors, both $M_1$ and $M_2$ are **OFF** (cutoff region).\n    *   No current flows through the branch containing $R_D$, $M_2$, and $M_1$.\n    *   There is no voltage drop across $R_D$.\n    *   **Result:** $V_{out} = V_{DD}$ (Logic High).\n\n*   **Case 2: High Input ($V_{in} > V_{th}$)**\n    *   As $V_{in}$ rises above $V_{th}$, $M_1$ begins to turn on.\n    *   For $M_2$ to conduct, its gate-source voltage $V_{GS2}$ must exceed $V_{th}$. Since $V_{G2} = V_{in}$ and $V_{S2} = V_{D1}$ (voltage at the drain of $M_1$), we need $V_{in} - V_{D1} > V_{th}$.\n    *   If the input is high enough (typically close to $V_{DD}$), both transistors turn on and current flows from $V_{DD}$ through $R_D$, $M_2$, and $M_1$ to ground.\n    *   This current creates a voltage drop across $R_D$, pulling $V_{out}$ down.\n    *   **Result:** $V_{out}$ becomes low (Logic Low).\n\n### 4. Key Characteristics and Limitations\n\n*   **Threshold Voltage Drop (Degraded Logic Low):**\n    Unlike a standard CMOS inverter or an NMOS inverter with a single driver transistor, this circuit has two series transistors. To pull the output low, the input must overcome the threshold voltage of both transistors effectively.\n    *   The output low voltage ($V_{OL}$) will not be 0 V. It will be determined by the voltage divider formed by $R_D$ and the on-resistance of the series stack ($R_{on,M1} + R_{on,M2}$).\n    *   $V_{OL} \\approx V_{DD} \\cdot \\frac{R_{on, total}}{R_D + R_{on, total}}$.\n    *   Because there is a threshold penalty ($V_{th}$), the \"low\" logic level is higher (degraded) compared to a single-transistor NMOS inverter. This is a known disadvantage of series-connected enhancement-mode NMOS transistors.\n\n*   **Reduced Drive Strength:**\n    The series combination of $M_1$ and $M_2$ has a higher on-resistance than a single transistor. This means the circuit has a weaker \"pull-down\" capability, resulting in a slower discharge of any load capacitance at $V_{out}$ and a higher static power consumption if $R_D$ is small (though here $R_D$ is the main power consumer when output is low).\n\n*   **Small Signal Gain (if used as an amplifier):**\n    If biased in the linear region for analog amplification, the effective transconductance ($G_m$) of the stack is lower than that of a single transistor. The gain would be $A_v \\approx -G_m \\cdot (R_D || R_{out})$. Since $G_m$ is reduced due to the series connection (and the fact that $V_{GS2}$ is smaller than $V_{GS1}$), the gain is lower than a standard common-source amplifier.\n\n### Summary\nThe circuit is an **NMOS Inverter** (or logic NOT gate) implemented with two series NMOS transistors ($M_1$ and $M_2$) and a resistive load ($R_D$). It inverts the input signal ($V_{in}$ high $\\rightarrow$ $V_{out}$ low; $V_{in}$ low $\\rightarrow$ $V_{out}$ high), but suffers from a **threshold voltage drop** at the output low level, making it less efficient than CMOS logic. This topology is commonly found in dynamic logic circuits or as a building block for more complex logic gates (like NAND/NOR) in NMOS logic families.",
        "format": "markdown",
        "sha256": "b0d9bddd138ec2562bf6e8c55ca0a5b78563c5852629b96e8fa0acf8cdaf05c6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate series NMOS stack and its inverting behavior, but misses the key result: M1 operates in triode and extends M2’s channel, so the pair approximates a single NMOS with a longer effective channel. Its claimed threshold-degraded low level is also misleading.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1131,
        "output_tokens": 14599,
        "total_tokens": 15730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1131,
        "output_tokens": 14599,
        "total_tokens": 15730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13174,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit's structure, operation, and characteristics.\n\n### 1. Circuit Identification and Topology\nThe circuit consists of:\n*   **Power Supply:** $V_{DD}$ at the top.\n*   **Load Resistor:** $R_D$ connected between $V_{DD}$ and the output node $V_{out}$. This acts as a pull-up resistor (active load in a resistive sense).\n*   **Transistors:** Two NMOS transistors, $M_1$ and $M_2$.\n    *   **$M_1$:** The source is connected to ground. The gate is connected to the input $V_{in}$. The drain is connected to the source of $M_2$.\n    *   **$M_2$:** The drain is connected to the output node $V_{out}$ (and resistor $R_D$). The gate is connected to the input $V_{in}$ (tracing the wire from $V_{in}$ up to the gate of $M_2$). The source is connected to the drain of $M_1$.\n\n**Summary of Connections:**\n*   $M_1$ and $M_2$ are connected in **series** between the output node $V_{out}$ and ground.\n*   The **gates** of both transistors $M_1$ and $M_2$ are tied together to the input voltage $V_{in}$.\n*   This configuration forms a **series pull-down network (PDN)** controlled by a single input.\n\n### 2. DC Analysis (Operation)\nThis circuit functions essentially as a **logic inverter (NOT gate)** with a resistive load, but with a modified pull-down network compared to a standard single-transistor NMOS inverter.\n\n*   **Case 1: $V_{in} < V_{th}$ (Input Low)**\n    *   Both $M_1$ and $M_2$ are in cutoff (OFF) because $V_{GS} < V_{th}$ for both.\n    *   No current flows through $R_D$.\n    *   $V_{out} = V_{DD}$ (Logic High).\n\n*   **Case 2: $V_{in} > V_{th}$ (Input High)**\n    *   Both transistors turn ON. Current flows from $V_{DD}$ through $R_D$, $M_2$, and $M_1$ to ground.\n    *   $V_{out} = V_{DD} - I_D R_D$. Since current flows, $V_{out}$ will drop below $V_{DD}$ (Logic Low).\n    *   **Voltage Distribution:** Let $V_x$ be the voltage at the node between $M_1$ and $M_2$ (Source of $M_2$ / Drain of $M_1$).\n        *   $V_{GS1} = V_{in} - 0 = V_{in}$.\n        *   $V_{GS2} = V_{in} - V_x$.\n    *   For current to flow, we need $V_{GS2} > V_{th}$, which implies $V_x < V_{in} - V_{th}$.\n    *   The transistors will share the voltage. If $M_1$ and $M_2$ are identical, the overdrive voltage splits. The node $V_x$ will settle at a positive voltage (approx. $0.293(V_{in} - V_{th})$ for identical transistors in saturation/triode boundary), meaning the total resistance of the stack is higher than a single transistor.\n    *   Consequently, the output low voltage ($V_{OL}$) will be **higher** (less close to 0V) than in a standard inverter with a single transistor. This degrades the noise margin.\n\n### 3. Small-Signal Analysis (Analog Amplifier)\nIf used as an amplifier, the circuit can be analyzed using small-signal models.\n\n*   **Input:** $v_{in}$ is applied to both gates.\n*   **Transistors:**\n    *   $M_1$: $v_{gs1} = v_{in}$. It generates a current $g_{m1}v_{in}$.\n    *   $M_2$: $v_{gs2} = v_{in} - v_x$ (where $v_x$ is the small-signal voltage at the intermediate node).\n*   **Current Flow:** The current generated by $M_1$ ($g_{m1}v_{in}$) must flow through $M_2$. $M_2$ adjusts its internal voltage $v_x$ to pass this current.\n    *   $i_d \\approx g_{m1} v_{in}$.\n*   **Output Voltage:** $v_{out} = -i_d R_D \\approx -g_{m1} v_{in} R_D$.\n*   **Gain:** The voltage gain $A_v = v_{out} / v_{in} \\approx -g_{m1} R_D$.\n    *   *Note:* This is similar to a common-source amplifier using only $M_1$. However, the presence of $M_2$ in series adds resistance. If $M_2$ is not strong enough (or if we consider output resistance $r_o$), the effective transconductance of the stack is reduced. The stack acts like a single transistor with a longer channel length ($L_{eff} = L_1 + L_2$), which would reduce $g_m$.\n    *   More accurately, the small-signal resistance of the stack is $R_{stack} \\approx \\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}$ (roughly). The gain is roughly $-g_{m,eq} R_D$, where $g_{m,eq}$ is the equivalent transconductance of the series pair. Since they are in series, $g_{m,eq} < g_{m1}$.\n\n### 4. Body Effect\n*   For $M_1$, the source is at ground, so $V_{SB1} = 0$. No body effect.\n*   For $M_2$, the source is at $V_x > 0$. Assuming the substrate is connected to the lowest potential (ground) or a negative supply, there is a non-zero $V_{SB2} = V_x$.\n*   This **body effect** increases the threshold voltage of $M_2$ ($V_{th2} > V_{th0}$).\n*   This makes $M_2$ weaker, further reducing the current $I_D$ and increasing the output voltage $V_{out}$ in the \"ON\" state.\n\n### Conclusion\nThe circuit is an **NMOS inverter with a series-connected pull-down network**.\n*   **Digital Function:** It acts as a NOT gate. $V_{in}=0 \\rightarrow V_{out}=V_{DD}$; $V_{in}=High \\rightarrow V_{out}=Low$ (but not 0V).\n*   **Analog Function:** It is a common-source amplifier stage where the load is a resistor and the active device is a stack of two transistors. The series connection increases the on-resistance, leading to a higher $V_{OL}$ (output low voltage) and potentially lower gain compared to a single-transistor version. It is often used in digital circuits to reduce leakage current (multi-threshold logic) or in analog circuits to create specific non-linear transfer functions or current limiting.",
        "format": "markdown",
        "sha256": "356e14a7e822f92178e4f6b7c2e22cb00d2b4c4755197d10eb13c1fbe773a2be"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies the common-gate series NMOS pair and explicitly gives the key result, L_eff ≈ L1 + L2. Some additional operating-point and gain claims are inaccurate, but the golden solution explicitly awards full credit for this central conclusion.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1131,
        "output_tokens": 16567,
        "total_tokens": 17698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1131,
        "output_tokens": 16567,
        "total_tokens": 17698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14901,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification and Components\nThe circuit consists of the following components:\n*   **$V_{DD}$**: A DC voltage supply.\n*   **$R_D$**: A drain resistor acting as the load.\n*   **$M_1$ and $M_2$**: Two NMOS transistors. The arrow direction and connection to ground ($M_1$ source) and $V_{DD}$ ($M_2$ drain via resistor) confirm they are NMOS devices.\n*   **$V_{in}$**: The input voltage signal.\n*   **$V_{out}$**: The output voltage node.\n\n### 2. Circuit Topology\n*   **Series Connection**: Transistors $M_1$ and $M_2$ are connected in series. The source of $M_2$ is connected to the drain of $M_1$. Let's call the voltage at this intermediate node $V_x$ (i.e., $V_x = V_{D1} = V_{S2}$).\n*   **Common Gate Input**: The gates of both $M_1$ and $M_2$ are connected together to the input voltage $V_{in}$.\n*   **Load**: The drain of $M_2$ is connected to $V_{DD}$ through the resistor $R_D$. The output $V_{out}$ is taken at this node.\n*   **Ground**: The source of $M_1$ is connected to ground.\n\nThis configuration is essentially an **NMOS inverter** (or amplifier) where the pull-down network consists of two series-connected NMOS transistors with their gates tied together.\n\n### 3. DC Analysis (Operation as an Inverter)\nThe circuit functions as a logic inverter (NOT gate) or a non-linear amplifier.\n\n*   **When $V_{in} < V_{TH}$ (Threshold Voltage)**:\n    *   Both $M_1$ and $M_2$ are turned off ($V_{GS} < V_{TH}$).\n    *   No current flows through $R_D$ ($I_D \\approx 0$).\n    *   $V_{out} = V_{DD} - I_D R_D = V_{DD}$. (Logic High)\n\n*   **When $V_{in} > V_{TH}$**:\n    *   $M_1$ turns on. Since $M_1$ is in series with $M_2$, current can flow from $V_{DD}$ to ground if $M_2$ is also on.\n    *   For $M_2$ to conduct, we need $V_{GS2} > V_{TH}$. Since $V_{G2} = V_{in}$ and $V_{S2} = V_x$, we need $V_{in} - V_x > V_{TH}$.\n    *   As $V_{in}$ increases, the current $I_D$ through the stack ($M_1$ and $M_2$) increases.\n    *   The voltage drop across $R_D$ increases ($V_{R_D} = I_D R_D$).\n    *   Consequently, $V_{out} = V_{DD} - I_D R_D$ decreases. (Logic Low)\n\n**Effective Threshold Voltage:**\nUnlike a simple NMOS inverter with a single transistor, this stacked configuration has a higher effective threshold voltage. For significant current to flow, the input voltage $V_{in}$ must be high enough to turn on both transistors. Roughly, the stack requires $V_{in} \\approx V_{TH1} + V_{TH2}$ (or slightly less due to voltage division at node $V_x$) to fully conduct. This is known as the **stack effect**, which is often used to reduce leakage current in CMOS circuits (when the top transistor is off, the bottom one is also effectively off).\n\n### 4. Small-Signal Analysis (Amplifier Mode)\nIf the circuit is biased in the active region (with $V_{in}$ at a DC bias point and a small AC signal $v_{in}$), it acts as an **inverting amplifier**.\n\n*   **Transistor $M_1$**: Operates primarily in the **triode (linear) region** because $V_{DS1} = V_x$ is typically small ($V_x < V_{in} - V_{TH}$). It acts like a voltage-controlled resistor.\n*   **Transistor $M_2$**: Operates primarily in the **saturation region** (assuming $V_{out}$ is high enough). It acts as the main amplifying transistor (Common Source configuration with source degeneration).\n\n**Gain Derivation (Simplified):**\nAssuming $r_o \\to \\infty$ (ignoring channel length modulation) and matched transistors ($g_{m1} \\approx g_{m2} = g_m$):\n1.  The current from $M_1$ is $i_{d1} \\approx g_{m1} v_{in}$.\n2.  This current must flow through $M_2$. So $i_{d2} = i_{d1}$.\n3.  The output voltage is $v_{out} = -i_{d2} R_D$.\n4.  Therefore, $v_{out} \\approx -g_{m1} R_D v_{in}$.\n\nThe voltage gain is **$A_v \\approx -g_{m1} R_D$**.\n*   The negative sign indicates a **180-degree phase shift** (inversion).\n*   The gain is determined by the transconductance of the bottom transistor $M_1$ and the load resistor. $M_2$ essentially passes the current from $M_1$ to the output node.\n\n### 5. Summary\n*   **Function**: Inverting Amplifier / Inverter.\n*   **Key Feature**: The series connection of $M_1$ and $M_2$ with common gates increases the effective threshold voltage and reduces the drive current compared to a single transistor.\n*   **Application**: This topology is useful in **dynamic logic circuits** (like Domino logic) or for **leakage reduction** (where stacking transistors cuts off leakage paths). In analog design, it can be used to create a specific transfer characteristic or as a building block for more complex circuits.",
        "format": "markdown",
        "sha256": "e372421772d1b758386f610884ef6a793ed28a62b42add80679d64babdea1e58"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate series NMOS arrangement and the lower-triode/upper-saturation operating regions. However, it misses the essential longer-effective-channel behavior and instead gives an incorrect threshold-stacking explanation and gain derivation.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1131,
        "output_tokens": 15706,
        "total_tokens": 16837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1131,
        "output_tokens": 15706,
        "total_tokens": 16837,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Circuit Identification and Components\nThe circuit is an analog electronic circuit consisting of:\n*   **$V_{DD}$**: Positive DC supply voltage.\n*   **$R_D$**: A drain resistor (load resistor) connected to $V_{DD}$.\n*   **$I_1$**: A constant current source connected to ground.\n*   **$M_1$**: A transistor with gate input $V_{in}$. The arrow on the symbol points outward, which typically indicates an **NMOS** transistor (or in some conventions, a PMOS if the arrow is on the bulk, but let's assume standard source arrow convention: arrow out = NMOS). Let's assume **$M_1$ is an NMOS** transistor.\n*   **$M_2$**: A transistor with gate bias $V_b$. The arrow on the symbol points inward, which typically indicates a **PMOS** transistor (arrow in = PMOS source arrow). Let's assume **$M_2$ is a PMOS** transistor.\n*   **$V_{out}$**: The output voltage node.\n\n### 2. Circuit Topology and Connections\nLet's trace the connections carefully to ensure a valid operating point:\n*   **$M_1$ (NMOS)**:\n    *   **Gate**: Connected to $V_{in}$.\n    *   **Drain**: Connected to $V_{DD}$ (top rail).\n    *   **Source**: Connected to the common node above the current source $I_1$. Let's call this node voltage $V_S$.\n    *   Since the drain is at $V_{DD}$ (highest potential) and source is at $V_S$, current $I_{D1}$ flows from $V_{DD}$ to $V_S$. This configuration is a **Common-Drain** (Source Follower) stage for $M_1$, or simply a current source controlled by $V_{in}$.\n\n*   **$M_2$ (PMOS)**:\n    *   **Gate**: Connected to $V_b$ (DC bias).\n    *   **Source**: For a PMOS transistor, the source is the terminal at the higher potential. To make the circuit work with current flowing from $V_{DD}$ through $R_D$, the current must flow from the output node into the transistor. Thus, the **Source of $M_2$ is connected to the $V_{out}$ node** (top side of the transistor symbol) and the **Drain is connected to the common node $V_S$** (bottom side).\n    *   Current $I_{D2}$ flows from $V_{out}$ (Source) to $V_S$ (Drain).\n\n*   **Common Node ($V_S$)**:\n    *   The source of $M_1$ and the drain of $M_2$ are connected together.\n    *   This node is connected to the current source $I_1$, which pulls current $I_1$ to ground.\n\n### 3. DC Analysis and Current Relationships\nApplying Kirchhoff's Current Law (KCL) at the common node $V_S$:\n*   Current entering from $M_1$ (NMOS): $I_{D1}$.\n*   Current entering from $M_2$ (PMOS, flowing Drain to Source? No, PMOS flows Source to Drain. So current flows from $V_{out}$ to $V_S$): $I_{D2}$.\n*   Current leaving through $I_1$: $I_1$.\n\nSo, the current balance equation is:\n$$I_{D1} + I_{D2} = I_1$$\n\nApplying KCL at the output node $V_{out}$:\n*   Current entering from $R_D$: $\\frac{V_{DD} - V_{out}}{R_D}$.\n*   Current leaving into $M_2$ (Source): $I_{D2}$.\n\nSo,\n$$\\frac{V_{DD} - V_{out}}{R_D} = I_{D2} \\quad \\Rightarrow \\quad V_{out} = V_{DD} - I_{D2} R_D$$\n\n### 4. Small-Signal Operation (Amplifier Analysis)\nLet's determine how the output voltage $V_{out}$ changes with the input voltage $V_{in}$.\n\n1.  **Input Increase**: Suppose $V_{in}$ increases ($V_{in} \\uparrow$).\n2.  **Effect on $M_1$**: Since $M_1$ is an NMOS transistor, an increase in gate voltage $V_{in}$ increases the gate-source voltage $V_{GS1} = V_{in} - V_S$. This causes the drain current $I_{D1}$ to **increase** ($I_{D1} \\uparrow$).\n3.  **Effect on Current Split**: From the equation $I_{D1} + I_{D2} = I_1$, since $I_1$ is constant and $I_{D1}$ increases, the current $I_{D2}$ must **decrease** ($I_{D2} \\downarrow$).\n4.  **Effect on Output Voltage**: From the equation $V_{out} = V_{DD} - I_{D2} R_D$, if $I_{D2}$ decreases, the voltage drop across the resistor $R_D$ ($I_{D2} R_D$) decreases. Consequently, $V_{out}$ **increases** ($V_{out} \\uparrow$).\n\n**Conclusion**: An increase in $V_{in}$ leads to an increase in $V_{out}$. Therefore, this circuit acts as a **Non-Inverting Amplifier**.\n\n### 5. Summary\n*   **Circuit Type**: This is a **current-steering amplifier** or a modified differential pair configuration. Specifically, it resembles a CMOS inverter stage driven by a current source, or a differential pair with mixed transistor types.\n*   **Function**: It amplifies the input signal $V_{in}$.\n*   **Phase**: The output $V_{out}$ is in phase with the input $V_{in}$ (**Non-Inverting**).\n*   **Gain**: The voltage gain $A_v = \\frac{v_{out}}{v_{in}}$ is positive. A rough approximation for the gain would involve the transconductance of $M_1$ ($g_{m1}$) and the load resistance $R_D$. Specifically, $A_v \\approx g_{m1} R_D$ (assuming $M_2$ acts as a variable load controlled by the current steering).\n\n*Note: If both transistors were assumed to be NMOS (ignoring the specific arrow direction on $M_2$ which is common in some simplified diagrams for differential pairs), the analysis would be: $V_{in} \\uparrow \\rightarrow I_{D1} \\uparrow \\rightarrow I_{D2} \\downarrow$ (since $I_{D1}+I_{D2}=I_1$) $\\rightarrow V_{out} \\uparrow$. The result is the same: a **Non-Inverting Amplifier**.*",
        "format": "markdown",
        "sha256": "e9784b14b3d9ef13c03d0ef23ede446a11cebf0a722c5673aa23ddd40066cd67"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The current-split argument and non-inverting polarity are right, but the answer misidentifies M2 as a PMOS and places its source at the output. It therefore misses the actual source-follower/common-gate (source-coupled NMOS) topology and gives an inaccurate gain estimate.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 27734,
        "total_tokens": 29568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 27734,
        "total_tokens": 29568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit's structure, operation, and characteristics.\n\n### 1. Circuit Identification and Topology\nThe circuit consists of two MOSFETs, a resistor, and a current source:\n*   **$M_1$**: An **NMOS** transistor. The arrow on the symbol points outwards, which is characteristic of an NMOS (or indicates the source terminal in some conventions). Its gate is connected to the input $V_{in}$, its drain is connected to $V_{DD}$, and its source is connected to the common node with $M_2$.\n*   **$M_2$**: A **PMOS** transistor. The arrow points inwards. Its gate is connected to a bias voltage $V_b$, its source is connected to the resistor $R_D$ (which goes to $V_{DD}$), and its drain is connected to the common node with $M_1$.\n*   **$R_D$**: A drain resistor connected to $V_{DD}$. The output voltage $V_{out}$ is taken at the source of $M_2$ (between $R_D$ and $M_2$).\n*   **$I_1$**: A constant current source connected to the common source/drain node (let's call this node $X$) and grounded.\n\n**Topology Summary**:\n*   $M_1$ (NMOS) has its drain at AC ground ($V_{DD}$). This configuration is a **Source Follower** (Common Drain amplifier). The input is at the gate ($V_{in}$), and the output of this stage is at the source (node $X$).\n*   $M_2$ (PMOS) has its gate at a fixed DC bias ($V_b$, AC ground). Its drain is at node $X$, and its source is at $V_{out}$. This part of the circuit acts as a current-to-voltage converter or a level shifter stage.\n\n### 2. DC Analysis\n*   **Current Flow**: The current source $I_1$ pulls a constant current from the common node $X$ to ground. This current is supplied by the two transistors: $I_1 = I_{D1} + I_{D2}$.\n*   **$M_1$ Operation**: Since the drain of $M_1$ is at $V_{DD}$ (higher potential) and the source is at node $X$ (lower potential), $M_1$ is an NMOS operating with $V_{DS} > 0$. Assuming $V_{in}$ is within range, $M_1$ operates in the **saturation region** acting as a source follower. The voltage at node $X$ ($V_X$) will follow the input voltage:\n    $$V_X \\approx V_{in} - V_{TH1}$$\n    (where $V_{TH1}$ is the threshold voltage of $M_1$).\n*   **$M_2$ Operation**: $M_2$ is a PMOS. Current flows from $V_{DD}$ through $R_D$ into the source of $M_2$, and out of the drain into node $X$. The current $I_{D2}$ is determined by the bias $V_b$ and the output voltage $V_{out}$.\n    $$I_{D2} = \\frac{V_{DD} - V_{out}}{R_D}$$\n\n### 3. Small-Signal Analysis (AC Analysis)\nLet's derive the voltage gain $A_v = v_{out} / v_{in}$.\n\n1.  **Stage 1 ($M_1$ - Source Follower)**:\n    $M_1$ buffers the input voltage $v_{in}$ to node $X$. The gain of a source follower is approximately 1 (slightly less).\n    $$v_x \\approx v_{in}$$\n    More precisely, the impedance looking into the source of $M_1$ is roughly $1/g_{m1}$. The load at node $X$ is the impedance looking into the drain of $M_2$.\n\n2.  **Stage 2 ($M_2$ and $R_D$)**:\n    Since $I_1$ is a constant current source, any change in current $\\Delta I_{D1}$ must be compensated by an opposite change in $\\Delta I_{D2}$:\n    $$\\Delta I_{D1} + \\Delta I_{D2} = 0 \\implies \\Delta I_{D2} = -\\Delta I_{D1}$$\n\n    The current $\\Delta I_{D1}$ is determined by the small-signal voltage at the gate-source of $M_1$. Since $M_1$ is a source follower driving a load $Z_L$ (impedance at node $X$), the current change is small.\n    The impedance at node $X$ looking into the drain of $M_2$ (which has a source resistance $R_D$) is approximately $g_{m2} r_{o2} R_D$ (intrinsic gain of $M_2$ times $R_D$).\n    \n    So, the current change from $M_1$ is approximately:\n    $$\\Delta I_{D1} \\approx \\frac{v_{in}}{Z_{load}} \\approx \\frac{v_{in}}{g_{m2} r_{o2} R_D}$$\n    *(Note: This assumes the source follower gain is close to 1 and the load is large).*\n\n    Now, look at the output node $V_{out}$. The output voltage is determined by the current $I_{D2}$ flowing through $R_D$:\n    $$V_{out} = V_{DD} - I_{D2} R_D$$\n    Taking the small-signal variation:\n    $$v_{out} = -\\Delta I_{D2} R_D$$\n    Since $\\Delta I_{D2} = -\\Delta I_{D1}$:\n    $$v_{out} = \\Delta I_{D1} R_D$$\n\n    Substituting the expression for $\\Delta I_{D1}$:\n    $$v_{out} \\approx \\left( \\frac{v_{in}}{g_{m2} r_{o2} R_D} \\right) R_D$$\n    $$v_{out} \\approx \\frac{v_{in}}{g_{m2} r_{o2}}$$\n\n### 4. Circuit Characteristics and Function\n*   **Voltage Gain ($A_v$)**:\n    $$A_v = \\frac{v_{out}}{v_{in}} \\approx \\frac{1}{g_{m2} r_{o2}}$$\n    The gain is **positive** (non-inverting) and **very small** (much less than 1), as $g_{m2} r_{o2}$ (the intrinsic gain of the transistor) is typically large (e.g., 10-100).\n\n*   **Input Impedance**: Very high (infinite ideally), as the input is connected to the gate of $M_1$.\n\n*   **Output Impedance**: Low. Looking into $V_{out}$, we see $R_D$ in parallel with the source impedance of $M_2$ (which is roughly $1/g_{m2}$). So $Z_{out} \\approx R_D || (1/g_{m2})$.\n\n*   **Function**: This circuit acts as a **low-gain non-inverting buffer** or a **level shifter**.\n    *   $M_1$ converts the input voltage $V_{in}$ into a current/voltage at node $X$ (Source Follower).\n    *   The variation in node $X$ modulates the current through $M_2$ (due to channel length modulation / output resistance $r_{o2}$).\n    *   This current change creates a voltage variation at $V_{out}$ across $R_D$.\n\nThis type of configuration is often found in **CMOS analog circuits**, such as the input stage of a comparator or a specific level-shifting buffer where a high-impedance voltage signal needs to be converted to a low-impedance signal with a specific DC level shift. It can also be viewed as a **complementary differential pair** (NMOS input $V_{in}$, PMOS input $V_b$) operating in a single-ended mode.",
        "format": "markdown",
        "sha256": "5e0bc784a6c4b71a29af9de0494d93e8c919aa7f32199114321822eb4acbcee9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2 as a PMOS and places the output at its source; in the actual circuit M2 is the common-gate NMOS, with the output at its drain. That reverses the key signal path and leads to an incorrect, tiny gain rather than the source-follower/common-gate gain.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 19237,
        "total_tokens": 21071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 19237,
        "total_tokens": 21071,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis.\n\n### 1. Circuit Identification\nThe circuit shown is an **NMOS Differential Pair** (also known as a long-tailed pair) configured as a **single-ended output amplifier**.\n*   **Transistors $M_1$ and $M_2$**: Both are NMOS transistors. We can identify them as NMOS because their sources are connected towards the ground (via the current source $I_1$) and their drains are connected towards the positive supply $V_{DD}$.\n*   **Tail Current Source $I_1$**: Provides a constant bias current for the differential pair.\n*   **Input $V_{in}$**: Applied to the gate of $M_1$.\n*   **Bias $V_b$**: A fixed DC voltage applied to the gate of $M_2$.\n*   **Load Resistor $R_D$**: Connected to the drain of $M_2$.\n*   **Output $V_{out}$**: Taken from the drain of $M_2$.\n*   **Connection of $M_1$ Drain**: The drain of $M_1$ is connected directly to $V_{DD}$.\n\n### 2. DC Analysis (Operation Principle)\nThe core operation of this circuit relies on **current steering**.\n*   The total current flowing through the sources of $M_1$ and $M_2$ is fixed by the current source $I_1$. Therefore:\n    $$I_{D1} + I_{D2} = I_1$$\n    where $I_{D1}$ and $I_{D2}$ are the drain currents of $M_1$ and $M_2$ respectively.\n*   The output voltage is determined by the current flowing through $M_2$ and the resistor $R_D$:\n    $$V_{out} = V_{DD} - I_{D2} R_D$$\n\n**How it works:**\n1.  If the input voltage $V_{in}$ **increases**, the transistor $M_1$ turns on more strongly, attempting to increase its drain current $I_{D1}$.\n2.  Since the total current $I_1$ is constant, an increase in $I_{D1}$ forces a **decrease** in $I_{D2}$ ($I_{D2} = I_1 - I_{D1}$).\n3.  As $I_{D2}$ decreases, the voltage drop across the resistor $R_D$ ($V_{R_D} = I_{D2} R_D$) decreases.\n4.  Consequently, the output voltage $V_{out} = V_{DD} - I_{D2} R_D$ **increases**.\n\nSince an increase in input voltage leads to an increase in output voltage, this circuit acts as a **non-inverting amplifier**.\n\n### 3. Small-Signal Analysis (Gain Derivation)\nLet's derive the voltage gain $A_v = v_{out} / v_{in}$. We assume small-signal parameters $g_{m1}$ and $g_{m2}$ for the transistors and ignore channel length modulation ($r_o = \\infty$) for simplicity. The current source $I_1$ is an open circuit for AC signals.\n\n1.  **Source Node Voltage ($v_s$):**\n    Let $v_s$ be the small-signal voltage at the common source node.\n    *   For $M_1$: $v_{gs1} = v_{in} - v_s$. The current flowing from drain to source is $i_{d1} = g_{m1}(v_{in} - v_s)$.\n    *   For $M_2$: The gate is at AC ground ($V_b$ is DC), so $v_{gs2} = 0 - v_s = -v_s$. The current is $i_{d2} = g_{m2}(-v_s)$.\n    *   KCL at the source node (currents entering from channels must sum to zero since $I_1$ is open):\n        $$i_{d1} + i_{d2} = 0$$\n        $$g_{m1}(v_{in} - v_s) + g_{m2}(-v_s) = 0$$\n        $$g_{m1}v_{in} = (g_{m1} + g_{m2})v_s$$\n        $$v_s = v_{in} \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right)$$\n\n2.  **Output Voltage ($v_{out}$):**\n    The output node is at the drain of $M_2$. The small-signal current $i_{d2}$ flows from drain to source, leaving the output node. The resistor $R_D$ connects the output node to AC ground ($V_{DD}$).\n    *   KCL at output node: $\\frac{v_{out}}{R_D} + i_{d2} = 0 \\Rightarrow v_{out} = -i_{d2} R_D$.\n    *   Substitute $i_{d2} = -g_{m2}v_s$:\n        $$v_{out} = -(-g_{m2}v_s) R_D = g_{m2} v_s R_D$$\n\n3.  **Voltage Gain ($A_v$):**\n    Substitute the expression for $v_s$ into the $v_{out}$ equation:\n    $$v_{out} = g_{m2} R_D \\left[ v_{in} \\left( \\frac{g_{m1}}{g_{m1} + g_{m2}} \\right) \\right]$$\n    $$A_v = \\frac{v_{out}}{v_{in}} = \\left( \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} \\right) R_D$$\n\n    If the transistors are matched ($g_{m1} = g_{m2} = g_m$), the gain simplifies to:\n    $$A_v \\approx \\frac{g_m}{2} R_D$$\n\n### 4. Key Characteristics Summary\n*   **Function:** Non-inverting Voltage Amplifier (or Transconductor with resistive load).\n*   **Voltage Gain:** $A_v = \\frac{g_{m1} g_{m2}}{g_{m1} + g_{m2}} R_D$. For matched transistors, $A_v \\approx 0.5 g_m R_D$.\n*   **Input Impedance:** Infinite (ideally), as the input is at the gate of a MOSFET.\n*   **Output Impedance:** Approximately $R_D$ (in parallel with the output resistance of $M_2$, which is increased due to the source degeneration effect from $M_1$).\n*   **Phase:** Non-inverting ($0^\\circ$ phase shift).\n\nThis circuit is a fundamental building block in analog IC design, often used as a **transconductor** ($G_m$ stage) in active filters or operational amplifiers. Specifically, it converts the input voltage $V_{in}$ into a current, which is then converted back to a voltage by $R_D$.",
        "format": "markdown",
        "sha256": "5c282f11183ee52d48cff53e75529d637dd0cbf4981e3fd3ff913c99f3723a80"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair with M2’s gate biased at Vb and output at M2’s drain, and derives the correct non-inverting gain.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 11234,
        "total_tokens": 13068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1834,
        "output_tokens": 11234,
        "total_tokens": 13068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the interaction between the series resistor $R_S$ at the gate of transistor $M_1$ and the parasitic capacitances of the MOSFET (specifically $C_{gs}$ and $C_{gd}$).\n\nHere is a step-by-step explanation:\n\n**1. Circuit Configuration**\nThe circuit consists of an NMOS transistor $M_1$ configured as a **source follower** (common-drain amplifier), with its source connected to the output node $V_{out}$. The drain is connected to $V_{DD}$ (AC ground). The transistor $M_2$ acts as an active load (current source), presenting a resistive output impedance $r_{o2}$ to ground. The input $V_{in}$ is connected to the gate of $M_1$ through a resistor $R_S$.\n\n**2. Small-Signal Analysis for Output Impedance**\nTo find the output impedance $Z_{out}$, we apply a test voltage $V_x$ at the output node ($V_{out}$) and set the input voltage $V_{in}$ to 0 (AC ground).\n*   Since $V_{in} = 0$, the gate of $M_1$ is connected to ground through the resistor $R_S$.\n*   The drain of $M_1$ is at AC ground ($V_{DD}$).\n*   The output node is the source of $M_1$.\n\nThe total output impedance is the parallel combination of the output resistance of $M_2$ ($r_{o2}$) and the impedance looking into the source of $M_1$ ($Z_{source}$). Since $r_{o2}$ is purely resistive, the inductive behavior must come from $Z_{source}$.\n\n**3. The Role of Capacitances and $R_S$**\nIn the small-signal model of $M_1$:\n*   There is a gate-to-source capacitance **$C_{gs}$** between the gate (connected to ground via $R_S$) and the source ($V_x$).\n*   There is a gate-to-drain capacitance **$C_{gd}$** between the gate and the drain (AC ground).\n\nWhen a test voltage $V_x$ is applied at the source, it couples to the gate through $C_{gs}$. Because the gate is not at a solid AC ground (due to $R_S$), a voltage $V_g$ develops at the gate. This voltage $V_g$ is not in phase with $V_x$.\n\n**4. Deriving the Impedance Expression**\nUsing small-signal analysis, the impedance looking into the source of a MOSFET with a gate resistance $R_S$ is approximately given by:\n\n$$Z_{source} \\approx \\frac{1}{g_{m1}} \\cdot \\frac{1 + s R_S (C_{gs} + C_{gd})}{1 + s R_S C_{gd}}$$\n\nwhere $s = j\\omega$ is the complex frequency and $g_{m1}$ is the transconductance of $M_1$.\n\nLet's analyze this expression:\n*   The numerator has a time constant $\\tau_z = R_S(C_{gs} + C_{gd})$. This corresponds to a zero at frequency $\\omega_z = \\frac{1}{R_S(C_{gs} + C_{gd})}$.\n*   The denominator has a time constant $\\tau_p = R_S C_{gd}$. This corresponds to a pole at frequency $\\omega_p = \\frac{1}{R_S C_{gd}}$.\n\nSince $C_{gs} + C_{gd} > C_{gd}$, we have $\\tau_z > \\tau_p$, which implies **$\\omega_z < \\omega_p$** (the zero is at a lower frequency than the pole).\n\n**5. Why it is Inductive**\nFor a frequency $\\omega$ between the zero and the pole ($\\omega_z < \\omega < \\omega_p$), the term $\\frac{1 + j\\omega \\tau_z}{1 + j\\omega \\tau_p}$ has a positive phase angle.\nMathematically, for small $\\omega$ (but high enough to see the effect), we can approximate the expression:\n\n$$Z_{source} \\approx \\frac{1}{g_{m1}} (1 + j\\omega R_S C_{gs})$$\n*(This comes from expanding the fraction: $\\frac{1 + j\\omega R_S(C_{gs} + C_{gd})}{1 + j\\omega R_S C_{gd}} \\approx (1 + j\\omega R_S C_{gs} + j\\omega R_S C_{gd})(1 - j\\omega R_S C_{gd}) \\approx 1 + j\\omega R_S C_{gs}$)*\n\nThis can be rewritten as:\n$$Z_{source} \\approx \\underbrace{\\frac{1}{g_{m1}}}_{\\text{Resistance}} + j\\omega \\underbrace{\\left( \\frac{R_S C_{gs}}{g_{m1}} \\right)}_{\\text{Inductance } L}$$\n\nThe impedance has a positive imaginary part ($j\\omega L$), which is the definition of an inductor. The equivalent inductance is:\n$$L_{eq} = \\frac{R_S C_{gs}}{g_{m1}}$$\n\n**Conclusion**\nThe resistor $R_S$ prevents the gate from being a perfect AC ground. The capacitive coupling ($C_{gs}$) from the output to the gate, combined with $R_S$, creates a phase shift in the current flowing through the transistor. This phase shift manifests as a positive imaginary component in the impedance, making the output impedance appear **inductive** over a certain frequency range. This effect is often utilized in RF circuits for impedance matching or bandwidth enhancement (inductive peaking).",
        "format": "markdown",
        "sha256": "7b2dfc96dd2010292cd1b6e9de506979bfd8dda0ca96605a3499593f2606643b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the source follower and the relevant interaction of RS with Cgs, but its impedance expression and zero-pole argument omit the gm-dependent term that sets the key condition. It therefore incorrectly implies inductive behavior regardless of RS, rather than explaining the low-frequency 1/gm to high-frequency RS transition and the requirement RS > 1/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1335,
        "output_tokens": 8682,
        "total_tokens": 10017,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1335,
        "output_tokens": 8682,
        "total_tokens": 10017,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7405,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **source follower** (also known as a common-drain amplifier) configuration, where transistor $M_1$ is the main amplifying device and $M_2$ acts as an active load (current source). The output is taken at the source of $M_1$.\n\nThe output impedance can be inductive due to the interaction between the resistor $R_S$ connected to the gate and the parasitic **gate-source capacitance ($C_{gs}$)** of transistor $M_1$. Here is the step-by-step explanation:\n\n**1. Small-Signal Analysis Setup**\nTo determine the output impedance ($Z_{out}$), we apply a test voltage $V_x$ at the output node ($V_{out}$) and calculate the resulting current $I_x$ flowing into the node. We set the input voltage $V_{in}$ to zero (ground).\n*   Since $V_{in} = 0$, the gate of $M_1$ is connected to ground through the resistor $R_S$.\n*   The drain of $M_1$ is connected to $V_{DD}$ (AC ground).\n*   The source of $M_1$ is at $V_x$.\n\n**2. Gate Voltage and Capacitance Effect**\nAt high frequencies, the gate-source capacitance $C_{gs}$ of $M_1$ cannot be ignored. The gate node is connected to ground via $R_S$ and to the source (output node, voltage $V_x$) via $C_{gs}$. This forms a voltage divider/impedance network.\nThe voltage at the gate, $V_g$, is determined by the impedance divider between $R_S$ and $C_{gs}$:\n$$V_g \\approx V_x \\frac{1/sC_{gs}}{R_S + 1/sC_{gs}} = V_x \\frac{1}{1 + sR_SC_{gs}}$$\n*(Note: A more precise derivation including $C_{gd}$ yields a similar form, but $C_{gs}$ is the dominant factor here.)*\n\nActually, looking at the impedance looking into the source with gate resistance $R_G$ (here $R_S$):\nThe impedance looking into the source of a MOSFET with a gate resistance $R_S$ is approximately:\n$$Z_{source} \\approx \\frac{1 + s R_S C_{gs}}{g_m + s C_{gs}}$$\n(assuming $r_o$ is large and ignoring other capacitances for simplicity).\n\n**3. Analyzing the Impedance Expression**\nLet's analyze the complex impedance $Z = \\frac{1 + j\\omega R_S C_{gs}}{g_m + j\\omega C_{gs}}$.\nTo separate the real and imaginary parts, we multiply the numerator and denominator by the complex conjugate of the denominator ($g_m - j\\omega C_{gs}$):\n\n$$Z = \\frac{(1 + j\\omega R_S C_{gs})(g_m - j\\omega C_{gs})}{g_m^2 + (\\omega C_{gs})^2}$$\n\nExpanding the numerator:\n$$\\text{Numerator} = g_m - j\\omega C_{gs} + j\\omega R_S C_{gs} g_m - j^2 \\omega^2 R_S C_{gs}^2$$\n$$\\text{Numerator} = (g_m + \\omega^2 R_S C_{gs}^2) + j\\omega C_{gs} (R_S g_m - 1)$$\n\nSo the impedance is:\n$$Z = \\frac{g_m + \\omega^2 R_S C_{gs}^2}{g_m^2 + \\omega^2 C_{gs}^2} + j \\frac{\\omega C_{gs} (R_S g_m - 1)}{g_m^2 + \\omega^2 C_{gs}^2}$$\n\n**4. Condition for Inductive Behavior**\nThe impedance $Z$ has a real part (resistance) and an imaginary part (reactance).\n*   **Real Part:** $\\frac{g_m + \\omega^2 R_S C_{gs}^2}{g_m^2 + \\omega^2 C_{gs}^2}$ (Always positive, represents resistance).\n*   **Imaginary Part:** $\\frac{\\omega C_{gs} (R_S g_m - 1)}{g_m^2 + \\omega^2 C_{gs}^2}$.\n\nFor the impedance to be **inductive**, the imaginary part must be positive ($Z = R + j\\omega L$). This happens when:\n$$R_S g_m - 1 > 0 \\implies R_S > \\frac{1}{g_m}$$\n\n**Conclusion**\nIn many practical circuits, the resistance $R_S$ is larger than the inverse transconductance $1/g_m$ (which is typically a small resistance, e.g., a few ohms). When **$R_S > 1/g_m$**, the imaginary part of the output impedance is positive.\n\nPhysically, the resistor $R_S$ and the gate-source capacitance $C_{gs}$ introduce a phase delay in the gate voltage relative to the source voltage. This phase shift, combined with the transconductance $g_m$ of the transistor, causes the current drawn from the output to lag the voltage in a way that mimics an inductor. Therefore, the output impedance exhibits an inductive component ($j\\omega L_{eq}$).\n\nThe total output impedance is the parallel combination of this inductive impedance from $M_1$ and the output resistance of the current source $M_2$ ($r_{o2}$). In the frequency range where the inductive term dominates, the overall output impedance is inductive. This effect is often utilized in RF design for **inductive peaking** or impedance matching.",
        "format": "markdown",
        "sha256": "cbf4762f96f4cedc3eced3fa3bdc7b9a25113fdda9edbb5938d90f01609528cc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source follower, gives the correct output-impedance expression, and derives the inductive condition RS > 1/gm. However, the stated gate-voltage divider is reversed: at high frequency the gate follows the source through Cgs, rather than tending to ground as that expression implies. This makes the physical explanation inconsistent despite the correct result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1335,
        "output_tokens": 14205,
        "total_tokens": 15540,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1335,
        "output_tokens": 14205,
        "total_tokens": 15540,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12935,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The output impedance of the circuit can be inductive due to the interaction between the resistor $R_S$, the parasitic gate-to-source capacitance $C_{gs}$ of transistor $M_1$, and the transconductance $g_{m1}$ of the transistor. This is a phenomenon often analyzed in high-frequency circuit design (like source followers or common-drain amplifiers).\n\nHere is a step-by-step explanation:\n\n### 1. Circuit Topology\n*   **$M_1$**: This is an NMOS transistor configured as a **Source Follower** (Common Drain amplifier). The input is at the gate (through $R_S$), the drain is at AC ground ($V_{DD}$), and the output is taken at the source ($V_{out}$).\n*   **$M_2$**: This is an NMOS transistor acting as a **current source load** (bias current). For small-signal analysis, since its gate is at a fixed DC bias $V_b$ (AC ground) and its source is grounded, it appears as a resistor $r_{o2}$ (output resistance of the current source) connected from $V_{out}$ to ground.\n\n### 2. Small-Signal Analysis\nTo find the output impedance ($Z_{out}$), we apply a test voltage $V_x$ at the output node ($V_{out}$) and set the input voltage $V_{in} = 0$ (grounded). We then calculate the current $I_x$ flowing into the node.\n\n**Key Parasitic Capacitance:** The most important capacitance here is $C_{gs1}$ (gate-to-source capacitance of $M_1$). There is also a source-to-bulk capacitance $C_{sb1}$ to ground.\n\n**Gate Voltage ($V_g$):**\nWith $V_{in} = 0$, the resistor $R_S$ is connected from the gate of $M_1$ to ground. The test voltage $V_x$ at the source is coupled to the gate through $C_{gs1}$. Since the gate current is zero, we can find the gate voltage $V_g$ using the voltage divider formed by $R_S$ and the impedance of $C_{gs1}$ (actually, it's a current balance at the gate node):\nThe current flowing from the source ($V_x$) to the gate ($V_g$) through $C_{gs1}$ must flow through $R_S$ to ground.\n$$ (V_x - V_g) s C_{gs1} = \\frac{V_g}{R_S} $$\nSolving for $V_g$:\n$$ V_g = V_x \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} $$\n\n**Output Admittance ($Y_{out} = I_x / V_x$):**\nApplying Kirchhoff's Current Law (KCL) at the output node $V_x$:\nThe total current $I_x$ entering the node splits into:\n1.  Current through $M_2$ (resistor $r_{o2}$): $V_x / r_{o2}$\n2.  Current through parasitic cap $C_{sb1}$: $V_x s C_{sb1}$\n3.  Current through $C_{gs1}$ towards the gate: $(V_x - V_g) s C_{gs1}$\n4.  Current from the dependent current source $g_{m1}v_{gs1}$. The source $v_{gs1} = V_g - V_x$. The current flows from Drain (AC ground) to Source ($V_x$), so it enters the node. Value: $g_{m1}(V_g - V_x)$.\n\nSo, $I_x = \\frac{V_x}{r_{o2}} + V_x s C_{sb1} + (V_x - V_g) s C_{gs1} - g_{m1}(V_g - V_x)$\n$$ I_x = V_x \\left[ \\frac{1}{r_{o2}} + s C_{sb1} + s C_{gs1} + g_{m1} \\right] - V_g [ s C_{gs1} + g_{m1} ] $$\n\nSubstituting $V_g$:\n$$ Y_{out} = \\frac{I_x}{V_x} = \\frac{1}{r_{o2}} + s C_{sb1} + (g_{m1} + s C_{gs1}) \\left( 1 - \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} \\right) $$\nSimplifying the term in the bracket: $1 - \\frac{s R_S C_{gs1}}{1 + s R_S C_{gs1}} = \\frac{1}{1 + s R_S C_{gs1}}$.\n\nSo, the output admittance is:\n$$ Y_{out} = \\frac{1}{r_{o2}} + s C_{sb1} + \\frac{g_{m1} + s C_{gs1}}{1 + s R_S C_{gs1}} $$\n\n### 3. Why it becomes Inductive\nTo see the nature of the impedance, we substitute $s = j\\omega$ and separate the admittance $Y_{out}$ into real (conductance $G$) and imaginary (susceptance $B$) parts.\n\n$$ Y_{out} = G_{out} + j B_{out} $$\n\nThe term of interest is $\\frac{g_{m1} + j\\omega C_{gs1}}{1 + j\\omega R_S C_{gs1}}$. Multiplying numerator and denominator by the conjugate $(1 - j\\omega R_S C_{gs1})$:\n\n$$ \\text{Imaginary part of this term} \\propto \\omega C_{gs1} (1 - g_{m1} R_S) $$\n\nSo, the total susceptance $B_{out}$ is approximately:\n$$ B_{out} \\approx \\omega C_{sb1} + \\frac{\\omega C_{gs1} (1 - g_{m1} R_S)}{1 + \\omega^2 R_S^2 C_{gs1}^2} $$\n\n**Condition for Inductance:**\nFor an impedance to be inductive ($Z = j\\omega L$), its admittance must have a **negative imaginary part** (negative susceptance), i.e., $B_{out} < 0$. (Since $Y = 1/Z = 1/(j\\omega L) = -j/(\\omega L)$).\n\nLooking at the equation for $B_{out}$:\n*   If **$g_{m1} R_S > 1$**, the term $(1 - g_{m1} R_S)$ becomes **negative**.\n*   At certain frequencies, this negative term can be larger in magnitude than the positive $\\omega C_{sb1}$ term.\n*   When $B_{out} < 0$, the impedance $Z_{out} = 1/(G_{out} + jB_{out})$ will have a positive imaginary part, which corresponds to an **inductor**.\n\n### Physical Intuition\nThe resistor $R_S$ and the capacitor $C_{gs}$ form a low-pass filter at the gate. When the output voltage $V_{out}$ changes, it couples back to the gate through $C_{gs}$. Because of $R_S$, the resulting gate voltage $V_g$ is delayed (phase shifted) relative to $V_{out}$.\n\nThis phase shift causes the current drawn by the transistor's transconductance ($g_{m1} v_{gs}$) to have a component that lags the voltage. In circuit theory, a current that lags voltage by 90 degrees is characteristic of an inductive load. Therefore, the combination of the source follower action and the gate resistance $R_S$ transforms the output impedance into an inductive one (specifically, a parallel combination of a resistor and an inductor) within a certain frequency range, provided $g_{m1} R_S > 1$.",
        "format": "markdown",
        "sha256": "31337aa45df354c51b23fee0536107f15db4e7a8bc6b6b556f597ca213ec91c8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the source follower and derives an output admittance showing inductive behavior when g_m1 R_S > 1 (with the stated parasitic-capacitance caveat). However, it omits the key low-frequency-to-high-frequency impedance transition, and its description of the gate response as delayed/low-pass is imprecise.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1335,
        "output_tokens": 10898,
        "total_tokens": 12233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1335,
        "output_tokens": 10898,
        "total_tokens": 12233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9137,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit's topology, operation, and function.\n\n### 1. Component Identification and Topology\n*   **Transistors $M_1$ and $M_2$**: Both are **NMOS transistors**.\n    *   **$M_1$**: The source is connected to ground (bottom terminal), the gate is connected to node **X**, and the drain is connected to the output node **$V_{out}$**. The arrow on the symbol indicates an NMOS device (current flows from drain to source).\n    *   **$M_2$**: The source is connected to ground (bottom terminal with arrow pointing out/left), the gate is connected to **$V_{out}$**, and the drain is connected to node **X**.\n*   **$R_{D1}$**: A resistor connected between the supply voltage $V_{DD}$ and the output node $V_{out}$. It acts as a pull-up resistor or load for the drain of $M_1$.\n*   **$I_{in}$**: An input current source connected between ground and node **X**, injecting current into the node.\n*   **Nodes**:\n    *   **Node X**: Connects the input current source $I_{in}$, the gate of $M_1$, and the drain of $M_2$.\n    *   **Node $V_{out}$**: Connects the drain of $M_1$, the resistor $R_{D1}$, the output terminal, and the gate of $M_2$.\n\n### 2. Circuit Operation (DC Analysis)\nThis circuit functions as a **Current-to-Voltage Converter** (also known as a Transimpedance Amplifier), specifically utilizing the square-law characteristic of MOS transistors.\n\n**Step 1: Analyze Node X**\nThe input current $I_{in}$ flows into node X. Since the gate of $M_1$ is an open circuit (infinite impedance at DC), no current flows into the gate of $M_1$. Therefore, all the input current $I_{in}$ must flow into the drain of transistor $M_2$.\n$$I_{D2} = I_{in}$$\n\n**Step 2: Analyze Transistor $M_2$**\nTransistor $M_2$ has its source at ground, gate at $V_{out}$, and drain at $V_X$.\n*   $V_{GS2} = V_{out} - 0 = V_{out}$\n*   $V_{DS2} = V_X - 0 = V_X$\n\nAssuming $M_2$ is operating in the **saturation region** (which is typical for such circuits to establish a stable relationship), the drain current is given by:\n$$I_{D2} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{GS2} - V_{th})^2$$\nSubstituting $I_{D2} = I_{in}$ and $V_{GS2} = V_{out}$:\n$$I_{in} = \\frac{1}{2} k_2 (V_{out} - V_{th})^2$$\nwhere $k_2 = \\mu_n C_{ox} (W/L)_2$.\n\nSolving for $V_{out}$:\n$$V_{out} = V_{th} + \\sqrt{\\frac{2 I_{in}}{k_2}}$$\nThis equation shows that the output voltage $V_{out}$ is determined primarily by the input current $I_{in}$ and is proportional to the square root of the current.\n\n**Step 3: Analyze Node $V_{out}$ and Transistor $M_1$**\nAt the output node $V_{out}$, the current flowing from $V_{DD}$ through $R_{D1}$ must equal the current flowing into the drain of $M_1$ (since the gate of $M_2$ draws no current).\n$$\\frac{V_{DD} - V_{out}}{R_{D1}} = I_{D1}$$\n\nTransistor $M_1$ has its source at ground, gate at $V_X$, and drain at $V_{out}$.\n*   $V_{GS1} = V_X$\n*   $V_{DS1} = V_{out}$\n\nAssuming $M_1$ is also in saturation:\n$$I_{D1} = \\frac{1}{2} k_1 (V_X - V_{th})^2$$\n\nThis equation allows us to find the voltage $V_X$:\n$$V_X = V_{th} + \\sqrt{\\frac{2 I_{D1}}{k_1}} = V_{th} + \\sqrt{\\frac{2 (V_{DD} - V_{out})}{k_1 R_{D1}}}$$\n\n**Condition for Operation:**\nFor $M_2$ to remain in saturation, we need $V_{DS2} \\ge V_{GS2} - V_{th}$, which means:\n$$V_X \\ge V_{out} - V_{th}$$\nSubstituting the expressions for $V_X$ and $V_{out}$, this condition sets the design constraints for $R_{D1}$ and the transistor sizes ($k_1, k_2$) to ensure the circuit operates correctly. Essentially, $M_1$ and $R_{D1}$ act to bias node X at a sufficient voltage to keep $M_2$ in saturation.\n\n### 3. Small-Signal Analysis\nTo find the transimpedance gain ($v_{out} / i_{in}$):\n\n1.  **At node X**: The input current $i_{in}$ flows into the drain of $M_2$. The small-signal current of $M_2$ (drain to source) is $g_{m2}v_{gs2} + v_{ds2}/r_{o2}$.\n    *   $v_{gs2} = v_{out}$\n    *   $v_{ds2} = v_x$\n    *   $i_{in} = g_{m2} v_{out} + \\frac{v_x}{r_{o2}}$  (Equation 1)\n\n2.  **At node $V_{out}$**: The sum of currents leaving the node is zero (assuming no load).\n    *   Current through $R_{D1}$: $v_{out} / R_{D1}$\n    *   Current through $M_1$ (drain to source): $g_{m1}v_{gs1} + v_{ds1}/r_{o1}$. Here $v_{gs1} = v_x$ and $v_{ds1} = v_{out}$.\n    *   $\\frac{v_{out}}{R_{D1}} + g_{m1} v_x + \\frac{v_{out}}{r_{o1}} = 0$\n    *   $v_{out} \\left( \\frac{1}{R_{D1}} + \\frac{1}{r_{o1}} \\right) = -g_{m1} v_x$\n    *   Let $R_{out1} = R_{D1} || r_{o1}$. Then $v_{out} = -g_{m1} R_{out1} v_x$  (Equation 2)\n\nSubstituting $v_x$ from Eq 2 into Eq 1:\nFrom Eq 2: $v_x = -\\frac{v_{out}}{g_{m1} R_{out1}}$\nSubstitute into Eq 1:\n$$i_{in} = g_{m2} v_{out} + \\frac{1}{r_{o2}} \\left( -\\frac{v_{out}}{g_{m1} R_{out1}} \\right)$$\n$$i_{in} = v_{out} \\left( g_{m2} - \\frac{1}{g_{m1} R_{out1} r_{o2}} \\right)$$\n\nAssuming $g_{m2} \\gg \\frac{1}{g_{m1} R_{out1} r_{o2}}$ (which is typical as $g_m r_o \\gg 1$):\n$$i_{in} \\approx g_{m2} v_{out}$$\n$$\\frac{v_{out}}{i_{in}} \\approx \\frac{1}{g_{m2}}$$\n\n### Conclusion\nThe circuit is a **Current-to-Voltage Converter (Transimpedance Amplifier)**.\n*   **Function**: It converts the input current $I_{in}$ into an output voltage $V_{out}$.\n*   **DC Relationship**: $V_{out} \\approx V_{th} + \\sqrt{2 I_{in} / k_2}$. The output voltage scales with the square root of the input current.\n*   **Small-Signal Gain**: The transimpedance gain is approximately $1/g_{m2}$, which is $1 / \\sqrt{2 k_2 I_{in}}$.\n*   **Role of $M_1$**: $M_1$ (along with $R_{D1}$) sets the DC voltage at node X ($V_X$) to ensure that transistor $M_2$ operates in the saturation region, allowing the square-law current-voltage relationship to hold. Without $M_1$ providing a path for current and setting $V_X$, the feedback loop would not be stable or functional.",
        "format": "markdown",
        "sha256": "22744ec248cac319b77cbc1b1000bd6828e8de28c914c1b8855ffe65f322baad"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies M2’s gate connection and derives small-signal coupling through M1 and M2, but then discards the loop-gain term and concludes this is a stable transimpedance amplifier. It misses the central positive-feedback consequence: negative input conductance and instability/latching.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1686,
        "output_tokens": 16004,
        "total_tokens": 17690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1686,
        "output_tokens": 16004,
        "total_tokens": 17690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit topology, DC behavior, and small-signal characteristics.\n\n### 1. Circuit Identification and Topology\nThe circuit consists of the following components:\n*   **Power Supply:** $V_{DD}$ (DC voltage source).\n*   **Load Resistor:** $R_{D1}$ connected between $V_{DD}$ and the output node.\n*   **Transistors:** Two NMOS transistors, $M_1$ and $M_2$.\n    *   **$M_1$:** Gate connected to node **X**, Source connected to **Ground**, Drain connected to the output node **$V_{out}$**.\n    *   **$M_2$:** Gate connected to node **X**, Source connected to **Ground**, Drain connected to the output node **$V_{out}$** (via the wire on the right).\n*   **Input:** A current source $I_{in}$ connected between ground and node **X**.\n\n**Topology Summary:**\nTransistors $M_1$ and $M_2$ are connected in **parallel**. Their gates are tied together at node **X**, their sources are tied to ground, and their drains are tied together at the output node **$V_{out}$**. This configuration effectively creates a single equivalent transistor with a combined transconductance. The circuit is a **Common-Source amplifier** stage with a resistive load, driven by a current input.\n\n### 2. DC Analysis\nIn a DC steady state, the gate current of a MOSFET is ideally zero ($I_G = 0$).\n*   The input current source $I_{in}$ is connected to the gate node **X**. Since there is no DC path for the current to flow into the high-impedance gate (assuming ideal MOSFETs), the voltage at node **X** ($V_X$) would theoretically rise indefinitely until the transistors saturate or the supply limits are reached.\n*   This implies that the circuit is intended to be analyzed as a **dynamic circuit** (transient response) or a **small-signal circuit** (AC analysis), rather than a simple DC bias circuit. It acts as an **integrator** or a **charge amplifier**.\n\nIf we assume a small leakage current or a bias mechanism exists to set the DC operating point:\n*   The current flowing through $R_{D1}$ is the sum of the drain currents of $M_1$ and $M_2$: $I_{total} = I_{D1} + I_{D2}$.\n*   The output voltage is given by: $V_{out} = V_{DD} - (I_{D1} + I_{D2})R_{D1}$.\n*   Since $V_{GS1} = V_{GS2} = V_X$, the transistors share the current based on their aspect ratios ($W/L$).\n\n### 3. Small-Signal Analysis\nLet's analyze the circuit for small signals (AC analysis). Let $v_x$ be the small-signal voltage at node X and $v_{out}$ be the small-signal voltage at the output.\n\n**A. Transistor Model:**\nSince $M_1$ and $M_2$ are in parallel with sources grounded:\n*   $v_{gs1} = v_x$\n*   $v_{gs2} = v_x$\n*   The total small-signal drain current generated by the transistors is $i_d = g_{m1}v_x + g_{m2}v_x = (g_{m1} + g_{m2})v_x$. Let $g_m = g_{m1} + g_{m2}$.\n*   The output resistance of the transistors is $r_o = r_{o1} || r_{o2}$.\n\n**B. Output Node ($V_{out}$):**\nApplying Kirchhoff's Current Law (KCL) at the output node (setting $V_{DD}$ to AC ground):\nThe current flowing down from the output node through the parallel combination of $R_{D1}$, $r_{o1}$, and $r_{o2}$ must equal the current generated by the transistors.\n$$ \\frac{v_{out}}{R_{D1} || r_{o1} || r_{o2}} = - (g_{m1} + g_{m2}) v_x $$\nLet $R_{out} = R_{D1} || r_{o1} || r_{o2}$.\n$$ v_{out} = -g_m R_{out} v_x $$\nThis shows that the circuit is an **inverting amplifier** with voltage gain $A_v = -g_m R_{out}$.\n\n**C. Input Node (X):**\nThe input current $i_{in}$ flows into node X. Since the gate impedance is infinite at low frequencies, the current flows into the parasitic capacitances at the gate.\n*   Capacitances to ground: $C_{gs1}, C_{gs2}$.\n*   Capacitances to output (feedback): $C_{gd1}, C_{gd2}$.\n\nApplying KCL at node X:\n$$ i_{in} = s C_{gs1} v_x + s C_{gd1} (v_x - v_{out}) + s C_{gs2} v_x + s C_{gd2} (v_x - v_{out}) $$\n$$ i_{in} = s (C_{gs1} + C_{gs2} + C_{gd1} + C_{gd2}) v_x - s (C_{gd1} + C_{gd2}) v_{out} $$\n\nSubstituting $v_{out} = -g_m R_{out} v_x$:\n$$ i_{in} = s [ (C_{gs1} + C_{gs2}) + (C_{gd1} + C_{gd2})(1 + g_m R_{out}) ] v_x $$\n\nThis term in the brackets is the effective input capacitance, $C_{in}$, which includes the **Miller Effect** multiplication of the gate-drain capacitance.\n$$ C_{in} \\approx C_{gs} + C_{gd}(1 + |A_v|) $$\nwhere $C_{gs} = C_{gs1} + C_{gs2}$ and $C_{gd} = C_{gd1} + C_{gd2}$.\n\nSo, $v_x = \\frac{i_{in}}{s C_{in}}$.\n\n**D. Transfer Function:**\nCombining the equations:\n$$ v_{out} = -g_m R_{out} v_x = -g_m R_{out} \\left( \\frac{i_{in}}{s C_{in}} \\right) $$\n$$ \\frac{V_{out}(s)}{I_{in}(s)} = - \\frac{g_m R_{out}}{s C_{in}} $$\n\n### 4. Conclusion and Function\n*   **Circuit Function:** This circuit acts as a **Transimpedance Integrator** (or Charge Amplifier). It converts an input current $I_{in}$ into an output voltage $V_{out}$.\n*   **Gain:** The transfer function is $Z_t(s) = \\frac{V_{out}}{I_{in}} = \\frac{-g_m R_{out}}{s C_{in}}$. The magnitude of the transimpedance gain decreases with frequency (roll-off of -20 dB/decade), characteristic of an integrator.\n*   **Phase:** The output is inverted (180-degree phase shift) relative to the input current integration.\n*   **Bandwidth:** The bandwidth is limited by the Miller capacitance. The unity-gain frequency (where $|V_{out}/I_{in}| = 1 \\Omega$) is approximately $\\omega_{UG} = \\frac{g_m R_{out}}{C_{in}}$.\n\nIn summary, the parallel transistors $M_1$ and $M_2$ increase the total transconductance ($g_m$) and drive strength, while the resistor $R_{D1}$ sets the output impedance and DC gain factor. The lack of a feedback resistor from output to input makes it an integrator.",
        "format": "markdown",
        "sha256": "424f3687acbaffba45c8822cf31aaea8b98aafd702a5e4f2e81f499094c890d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a common-source stage driven by a current source at X, but badly misreads M2 as parallel with M1, missing the positive-feedback loop and its instability. The claimed integrator behavior is therefore incorrect.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1686,
        "output_tokens": 13600,
        "total_tokens": 15286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1686,
        "output_tokens": 13600,
        "total_tokens": 15286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11791,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit topology, components, and operation.\n\n### 1. Circuit Identification\nThe circuit is a **Transimpedance Amplifier (TIA)** or a **Current-to-Voltage Converter**. It takes an input current $I_{\\text{in}}$ and produces a corresponding output voltage $V_{\\text{out}}$. It utilizes negative feedback to stabilize the operating point.\n\n### 2. Component Analysis\n*   **$V_{DD}$**: Positive DC power supply.\n*   **$R_{D1}$**: Drain resistor for transistor $M_1$. It converts the drain current of $M_1$ into a voltage drop.\n*   **$M_1$**: An **NMOS transistor**.\n    *   **Gate**: Connected to node $X$.\n    *   **Source**: Connected to ground.\n    *   **Drain**: Connected to the output node $V_{\\text{out}}$.\n    *   **Configuration**: Common-Source amplifier. It is an inverting amplifier stage (an increase in gate voltage $V_X$ increases drain current $I_{D1}$, which increases the voltage drop across $R_{D1}$, thereby decreasing $V_{\\text{out}}$).\n*   **$M_2$**: A **PMOS transistor** (indicated by the arrow pointing in towards the channel, although the specific orientation suggests a specific connection for feedback).\n    *   **Gate**: Connected to the output node $V_{\\text{out}}$ (via the wire going down and left).\n    *   **Source**: Connected to node $X$ (top terminal, higher potential). *Note: In standard PMOS operation for this feedback loop to work, the source must be at the higher potential node $X$.*\n    *   **Drain/Body**: Connected to ground (bottom terminal).\n    *   **Function**: Acts as a voltage-controlled current sink. It draws current from node $X$ to ground, controlled by the output voltage $V_{\\text{out}}$.\n*   **$I_{\\text{in}}$**: Input current source driving node $X$.\n\n### 3. Circuit Operation (DC Analysis)\nThe circuit operates based on the balance of currents at node $X$ and the feedback loop.\n\n1.  **Input Stage**: The input current $I_{\\text{in}}$ flows into node $X$. Since the gate of $M_1$ draws negligible DC current, this current must flow through transistor $M_2$ to ground.\n    $$I_{\\text{in}} \\approx I_{D2}$$\n    (Current through $M_2$)\n\n2.  **Feedback Mechanism**:\n    *   $M_2$ is a PMOS transistor with its gate at $V_{\\text{out}}$ and source at $X$. The source-gate voltage is $V_{SG2} = V_X - V_{\\text{out}}$.\n    *   The current through $M_2$ is approximately: $I_{D2} = \\frac{1}{2} k_{p2} (V_{SG2} - |V_{thp}|)^2 = \\frac{1}{2} k_{p2} (V_X - V_{\\text{out}} - |V_{thp}|)^2$.\n    *   Since $I_{\\text{in}} = I_{D2}$, the input current determines the relationship between $V_X$ and $V_{\\text{out}}$.\n\n3.  **Output Stage**:\n    *   $M_1$ (NMOS) is in saturation (assuming proper biasing). Its drain current is $I_{D1} = \\frac{1}{2} k_{n1} (V_X - V_{thn})^2$.\n    *   The output voltage is determined by the voltage drop across $R_{D1}$:\n        $$V_{\\text{out}} = V_{DD} - I_{D1} R_{D1}$$\n\n**Stability (Negative Feedback Loop):**\n*   Suppose $V_{\\text{out}}$ decreases (e.g., due to a disturbance).\n*   Since $M_2$ is a PMOS with Gate at $V_{\\text{out}}$, a decrease in $V_{\\text{out}}$ increases $V_{SG2} = V_X - V_{\\text{out}}$.\n*   This increases the current $I_{D2}$ through $M_2$.\n*   $M_2$ pulls more current from node $X$, causing $V_X$ to decrease.\n*   A decrease in $V_X$ reduces the current $I_{D1}$ in $M_1$.\n*   Reduced $I_{D1}$ means less voltage drop across $R_{D1}$, causing $V_{\\text{out}}$ to increase back to its original value.\n*   This confirms **negative feedback**, making the circuit stable.\n\n### 4. Small-Signal Analysis\nWe can determine the transimpedance gain ($v_{\\text{out}} / i_{\\text{in}}$).\n\n*   Let $v_x$ and $v_{\\text{out}}$ be small signal voltages at nodes $X$ and $V_{\\text{out}}$.\n*   For $M_1$ (Common Source): $v_{\\text{out}} = -g_{m1} v_x R_{D1}$ (ignoring output resistance $r_{o1}$).\n    *   $\\Rightarrow v_x = -\\frac{v_{\\text{out}}}{g_{m1} R_{D1}}$\n*   For $M_2$ (PMOS feedback element): The small signal current $i_{d2}$ flowing from $X$ to ground is:\n    *   $i_{d2} = g_{m2} v_{sg2} + g_{o2} v_{sd2}$\n    *   $v_{sg2} = v_x - v_{\\text{out}}$\n    *   $v_{sd2} = v_x - 0 = v_x$\n    *   $i_{d2} = g_{m2}(v_x - v_{\\text{out}}) + g_{o2} v_x$\n*   KCL at node $X$: The input signal current $i_{\\text{in}}$ equals the current sunk by $M_2$ (gate current of $M_1$ is 0).\n    *   $i_{\\text{in}} = i_{d2} = g_{m2}(v_x - v_{\\text{out}}) + g_{o2} v_x$\n\nSubstituting $v_x$:\n$$i_{\\text{in}} = g_{m2} \\left( -\\frac{v_{\\text{out}}}{g_{m1} R_{D1}} - v_{\\text{out}} \\right) + g_{o2} \\left( -\\frac{v_{\\text{out}}}{g_{m1} R_{D1}} \\right)$$\n$$i_{\\text{in}} = -v_{\\text{out}} \\left[ g_{m2} \\left( 1 + \\frac{1}{g_{m1} R_{D1}} \\right) + \\frac{g_{o2}}{g_{m1} R_{D1}} \\right]$$\n\nThe transimpedance gain is:\n$$ \\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx -\\frac{1}{g_{m2}} $$\n(Assuming $g_{m1} R_{D1} \\gg 1$, which is typical for amplifiers).\n\n### Conclusion\nThe circuit is an **inverting transimpedance amplifier**.\n*   **Function**: Converts input current $I_{\\text{in}}$ to output voltage $V_{\\text{out}}$.\n*   **Gain**: Approximately $-1/g_{m2}$ (where $g_{m2}$ is the transconductance of transistor $M_2$).\n*   **Role of $M_1$ and $R_{D1}$**: They form the main amplification stage and set the DC bias voltage $V_X$ required to keep $M_2$ in the correct operating region (saturation). $M_2$ provides the feedback that sets the output voltage level based on the input current.",
        "format": "markdown",
        "sha256": "03710ae86eca95413dc41c51772fdd14eb6a0ac23d98230b7335408dfd3e520f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M1 as a common-source stage and places M2's gate at Vout, but misidentifies M2 and reverses the feedback sign. The circuit has positive feedback and can be unstable or latch, not a stable negative-feedback TIA.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1686,
        "output_tokens": 19974,
        "total_tokens": 21660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1686,
        "output_tokens": 19974,
        "total_tokens": 21660,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18088,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis of the circuit topology, function, and characteristics.\n\n### 1. Circuit Identification and Topology\nThe circuit is a **two-stage amplifier with global negative feedback**.\n*   **Stage 1 ($M_1$):** Transistor $M_1$ is configured as a **Common-Gate (CG)** amplifier. Its gate is biased at a fixed DC voltage $V_b$ (AC ground). The input signal (current $I_{in}$) is applied to the source terminal, and the output of this stage is taken at the drain (node $X$).\n*   **Stage 2 ($M_2$):** Transistor $M_2$ is configured as a **Common-Source (CS)** amplifier. Its source is grounded, the input is at the gate (connected to node $X$), and the output is at the drain ($V_{out}$).\n*   **Feedback Network:** The resistor $R_F$ connects the output node ($V_{out}$) to the input node (source of $M_1$). The arrow $i_{RF}$ indicates the direction of the feedback current.\n\n### 2. Feedback Topology\nTo determine the type of feedback, we look at how the feedback network is connected to the input and output:\n*   **Output Sampling:** The feedback network ($R_F$) is connected in parallel (shunt) with the output node $V_{out}$. It samples the **output voltage**. This is **shunt sampling** (or voltage feedback).\n*   **Input Mixing:** The feedback network is connected in parallel (shunt) with the input current source $I_{in}$. The feedback current $i_{RF}$ adds to (or subtracts from) the input current at the input node. This is **shunt mixing** (or current feedback).\n\nTherefore, this is a **Shunt-Shunt Feedback** configuration. In terms of signal types, the input is a current ($I_{in}$) and the output is a voltage ($V_{out}$), so the circuit is a **Transimpedance Amplifier (TIA)** or a current-to-voltage converter.\n\n### 3. Circuit Operation Analysis\nLet's trace the signal path to determine the gain and feedback polarity:\n1.  **Input to Stage 1:** An increase in input current $I_{in}$ flows into the source of $M_1$. In a common-gate configuration, this current is passed to the drain. So, the drain current $I_{D1}$ increases.\n2.  **Node X Voltage:** The voltage at node $X$ is $V_X = V_{DD} - I_{D1}R_{D1}$. If $I_{D1}$ increases, the voltage drop across $R_{D1}$ increases, causing $V_X$ to **decrease**. (Note: In small-signal analysis, $v_x \\approx -i_{in}R_{D1}$).\n3.  **Stage 2:** The voltage $V_X$ is the gate voltage for $M_2$. Since $M_2$ is a common-source amplifier (inverting), a decrease in $V_X$ leads to a decrease in drain current $I_{D2}$.\n4.  **Output Voltage:** The output voltage is $V_{out} = V_{DD} - I_{D2}R_{D2}$. If $I_{D2}$ decreases, the voltage drop across $R_{D2}$ decreases, causing $V_{out}$ to **increase**.\n    *   *Summary:* $I_{in} \\uparrow \\rightarrow V_X \\downarrow \\rightarrow V_{out} \\uparrow$. The open-loop gain is positive (Current to Voltage). Wait, let's re-evaluate the signs carefully.\n    *   Small signal: $i_{in} \\rightarrow v_s \\uparrow \\rightarrow v_{gs1} \\downarrow \\rightarrow i_{d1} \\downarrow \\rightarrow v_x \\uparrow$ (since $v_x = -i_{d1}R_{D1}$ and $i_{d1}$ is negative change? No. $i_{d1} \\approx i_{in}$. $v_x = -i_{in}R_{D1}$. So $v_x$ is negative).\n    *   Let's use the standard result for Shunt-Shunt feedback: The circuit forces the input node to be a virtual ground (approximately).\n    *   KCL at input node: $I_{in} + \\frac{V_{out} - V_{in\\_node}}{R_F} \\approx 0$. Since $V_{in\\_node} \\approx 0$ (due to high loop gain), $I_{in} + \\frac{V_{out}}{R_F} \\approx 0$.\n    *   Therefore, $V_{out} \\approx -I_{in} R_F$.\n\n**Feedback Polarity:**\nIf $V_{out}$ increases (due to positive $I_{in}$), the current $i_{RF}$ flows from $V_{out}$ through $R_F$ to the input node. This current opposes the input current $I_{in}$ (if we consider the node voltage trying to rise). More precisely, the feedback action works to stabilize the gain. Since the overall open-loop transfer function from $I_{in}$ to $V_{out}$ involves an inversion (CS stage) and a non-inversion (CG stage current buffer), let's look at the loop gain.\nActually, the simplest way to see it is: The circuit is designed as a negative feedback amplifier. The resistor $R_F$ provides negative feedback.\n*   If $V_{out}$ goes up, current flows through $R_F$ to the source of $M_1$. This raises the source voltage $V_S$.\n*   $V_{GS1} = V_b - V_S$. If $V_S$ goes up, $V_{GS1}$ goes down.\n*   This reduces the drain current $I_{D1}$.\n*   This reduces the current into the next stage, eventually pulling $V_{out}$ back down.\n*   Thus, it is **Negative Feedback**.\n\n### 4. Key Characteristics\n*   **Function:** Transimpedance Amplifier (TIA). It converts an input current $I_{in}$ into a proportional output voltage $V_{out}$.\n*   **Closed-Loop Gain (Transresistance):**\n    Due to the high loop gain of the amplifier (product of gains of $M_1$ and $M_2$ stages), the feedback is strong. The approximate gain is determined by the feedback resistor:\n    $$ \\frac{V_{out}}{I_{in}} \\approx -R_F $$\n    The negative sign indicates that the output voltage is inverted with respect to the input current direction (assuming standard conventions).\n\n*   **Input Impedance ($Z_{in}$):**\n    Shunt feedback at the input reduces the input impedance. The input impedance is approximately:\n    $$ Z_{in} \\approx \\frac{R_F}{1 + A_{loop}} $$\n    Since the loop gain $A_{loop}$ is large, the input impedance is very low (close to zero), which is ideal for a current-input amplifier (it doesn't load the current source).\n\n*   **Output Impedance ($Z_{out}$):**\n    Shunt feedback at the output reduces the output impedance. The output impedance is approximately:\n    $$ Z_{out} \\approx \\frac{R_{D2}}{1 + A_{loop}} $$\n    This results in a low output impedance, making the circuit a good voltage source (stiff output).\n\n### Summary\nThe circuit is a **Shunt-Shunt negative feedback amplifier** configured as a **Transimpedance Amplifier**. It uses a Common-Gate stage ($M_1$) for low input impedance and current buffering, followed by a Common-Source stage ($M_2$) for voltage gain. The feedback resistor $R_F$ sets the transimpedance gain to approximately **$-R_F$**.",
        "format": "markdown",
        "sha256": "2e80cd52904842f9f7b14d6ecdbb36bbd0a29a505da754928a2b81fe7b1977fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a negative-feedback transimpedance amplifier. The intermediate sign tracing is confused, but the essential topology and conclusion are correct.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1907,
        "output_tokens": 14965,
        "total_tokens": 16872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13210,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1907,
        "output_tokens": 14965,
        "total_tokens": 16872,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13210,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis:\n\n### 1. Circuit Identification and Topology\nThe circuit is a **feedback amplifier**, specifically configured as a **Transimpedance Amplifier (TIA)** or a current-to-voltage converter.\n*   **Input:** A current source $I_{\\text{in}}$.\n*   **Output:** A voltage $V_{\\text{out}}$.\n*   **Feedback Network:** The resistor $R_F$ connects the output node ($V_{\\text{out}}$) to the input node (source of $M_1$).\n\n**Feedback Topology:**\n*   **Input Mixing:** The feedback signal (current through $R_F$) is connected in parallel (shunt) with the input current source $I_{\\text{in}}$. This is **shunt mixing** (current mixing).\n*   **Output Sampling:** The feedback network is connected in parallel (shunt) with the output node $V_{\\text{out}}$. This samples the output voltage. This is **shunt sampling**.\n*   Therefore, this is a **Shunt-Shunt feedback configuration**.\n\n### 2. Circuit Stages and Operation\nThe amplifier consists of two main transistor stages:\n*   **Stage 1 ($M_1$ and $R_{D1}$):** Transistor $M_1$ has its gate at a fixed bias voltage $V_b$ (AC ground) and its source at the input node. This configuration resembles a **Common-Gate** amplifier stage where the input is applied to the source. The drain is connected to node $X$ through $R_{D1}$.\n*   **Stage 2 ($M_2$ and $R_{D2}$):** Transistor $M_2$ has its gate connected to node $X$, its source grounded, and its drain at the output. This is a **Common-Source** amplifier stage.\n\n**Signal Path Analysis:**\n1.  The input current $I_{\\text{in}}$ flows into the source node of $M_1$.\n2.  This current, along with the feedback current from $R_F$, determines the source voltage $V_S$ (voltage at the source of $M_1$) and the drain current $I_{D1}$.\n    *   Since $M_1$ is an NMOS with gate at $V_b$, $I_{D1} \\approx \\frac{1}{2}k_n(V_b - V_S - V_{th})^2$. An increase in input current tends to raise $V_S$, which decreases $V_{GS1}$ and thus $I_{D1}$.\n3.  The drain current $I_{D1}$ flows through $R_{D1}$, creating a voltage drop. $V_X = V_{DD} - I_{D1}R_{D1}$.\n    *   If $I_{D1}$ decreases, $V_X$ increases.\n4.  $V_X$ is the gate voltage for $M_2$. An increase in $V_X$ increases the drain current $I_{D2}$ of $M_2$.\n5.  $I_{D2}$ flows through $R_{D2}$, creating a voltage drop. $V_{\\text{out}} = V_{DD} - I_{D2}R_{D2}$.\n    *   If $I_{D2}$ increases, $V_{\\text{out}}$ decreases.\n\n**Summary of Forward Gain:**\nAn increase in input current $I_{\\text{in}}$ $\\rightarrow$ raises input node voltage $V_S$ $\\rightarrow$ decreases $I_{D1}$ $\\rightarrow$ increases $V_X$ $\\rightarrow$ increases $I_{D2}$ $\\rightarrow$ **decreases $V_{\\text{out}}$**.\nThus, the forward transimpedance gain is negative ($V_{\\text{out}} / I_{\\text{in}} < 0$).\n\n### 3. Feedback Polarity (Stability Analysis)\nLet's verify if the feedback is negative or positive.\n*   Assume $I_{\\text{in}}$ increases.\n*   As analyzed above, this causes $V_{\\text{out}}$ to **decrease**.\n*   The feedback current $i_{\\text{RF}}$ is defined flowing from right to left (from $V_{\\text{out}}$ to input). $i_{\\text{RF}} = (V_{\\text{out}} - V_S) / R_F$.\n*   Since $V_{\\text{out}}$ decreases and $V_S$ increases (to accommodate the input current), the potential difference $(V_{\\text{out}} - V_S)$ becomes more negative. This means the current flowing from output to input decreases (or current flows from input to output).\n*   Effectively, the feedback action draws current away from the input node (or reduces the current added to it), opposing the initial increase in $I_{\\text{in}}$.\n*   Therefore, the circuit employs **Negative Feedback**.\n\n### 4. Performance Characteristics\nDue to the negative shunt-shunt feedback:\n\n*   **Closed-Loop Gain (Transimpedance):**\n    The feedback forces the input node voltage $V_S$ to be close to a virtual ground (specifically, determined by the balance of currents). Most of the input current $I_{\\text{in}}$ is diverted through the feedback resistor $R_F$.\n    Approximate KCL at input node: $I_{\\text{in}} \\approx -i_{\\text{RF}} = - (V_{\\text{out}} - V_S) / R_F \\approx -V_{\\text{out}} / R_F$ (assuming $V_S \\approx 0$).\n    $$ \\frac{V_{\\text{out}}}{I_{\\text{in}}} \\approx -R_F $$\n    The circuit acts as a current-to-voltage converter with a gain of approximately $-R_F$.\n\n*   **Input Impedance ($Z_{\\text{in}}$):**\n    Shunt input feedback reduces the input impedance. The input impedance is the parallel combination of the impedance looking into the source of $M_1$ ($1/g_{m1}$) and the feedback resistor $R_F$.\n    $$ Z_{\\text{in}} \\approx \\frac{1}{g_{m1}} \\parallel R_F $$\n    This results in a **low input impedance**, which is desirable for a current amplifier/TIA to avoid loading the source.\n\n*   **Output Impedance ($Z_{\\text{out}}$):**\n    Shunt output feedback reduces the output impedance. The output impedance is the parallel combination of $R_{D2}$, the output impedance of $M_2$, and $R_F$ (reduced by the loop gain).\n    $$ Z_{\\text{out}} \\approx R_{D2} \\parallel R_F \\parallel \\left( \\frac{1}{g_{m2}} \\dots \\right) $$\n    This results in a **low output impedance**, making the output voltage less sensitive to load variations.\n\n### Conclusion\nThe circuit is a **Shunt-Shunt Negative Feedback Transimpedance Amplifier**. It converts an input current $I_{\\text{in}}$ into an output voltage $V_{\\text{out}}$ with a gain of approximately $-R_F$. It features low input and low output impedances.",
        "format": "markdown",
        "sha256": "e12fa4e55c4e530415656f1199c40cc743f33b5f5cb8810dfd8c4d3c653e609a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as output-to-input feedback forming a negative-feedback transimpedance amplifier. The -RF gain conclusion is also correct; the full-credit rule does not require the more detailed impedance estimates.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1907,
        "output_tokens": 22961,
        "total_tokens": 24868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1907,
        "output_tokens": 22961,
        "total_tokens": 24868,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21329,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of the circuit's topology, function, and characteristics.\n\n### 1. Circuit Overview and Identification\nThe circuit shown is a **Transimpedance Amplifier (TIA)**, also known as a **current-to-voltage converter**. Its primary function is to convert an input current signal ($I_{\\text{in}}$) into an output voltage signal ($V_{\\text{out}}$).\n\nThe circuit employs a **shunt-shunt feedback** topology (also known as current-mixing, voltage-sampling feedback).\n\n### 2. Circuit Topology and Feedback Analysis\n*   **Input Stage ($M_1$):** Transistor $M_1$ is configured as a **Common-Gate (CG) amplifier**.\n    *   The gate is connected to a fixed bias voltage $V_b$ (AC ground).\n    *   The input current $I_{\\text{in}}$ is applied to the source terminal.\n    *   The output of this stage is taken from the drain (node $X$).\n    *   A common-gate configuration is chosen because it provides a **low input impedance**, which is ideal for accepting current from a high-impedance source (like a photodiode) without developing a large voltage that would limit bandwidth.\n\n*   **Gain Stage ($M_2$):** Transistor $M_2$ is configured as a **Common-Source (CS) amplifier**.\n    *   The gate is driven by the output of the first stage (node $X$).\n    *   The source is grounded.\n    *   The output voltage $V_{\\text{out}}$ is taken from the drain.\n    *   This stage provides the main voltage gain and inverts the signal phase.\n\n*   **Feedback Network ($R_F$):** The resistor $R_F$ connects the output node ($V_{\\text{out}}$) to the input node (source of $M_1$).\n    *   **Sampling:** The feedback network is connected in parallel with the output, sampling the **output voltage** (Shunt sampling).\n    *   **Mixing:** The feedback current ($i_{\\text{RF}}$) is fed back to the input node where it mixes with the input current $I_{\\text{in}}$ (Shunt mixing / Current mixing).\n    *   **Type:** This confirms the **Shunt-Shunt** feedback configuration.\n\n### 3. Operation Principle\nLet's trace the signal flow to understand the negative feedback mechanism:\n1.  An increase in input current $I_{\\text{in}}$ (flowing upwards) tends to raise the voltage at the source of $M_1$ ($V_s$).\n2.  Since $M_1$ is a Common-Gate amplifier ($V_{gs1} = V_b - V_s$), an increase in $V_s$ makes $V_{gs1$ more negative, reducing the drain current of $M_1$.\n3.  With less current flowing through $M_1$, the voltage drop across $R_{D1}$ decreases, causing the voltage at node $X$ ($V_x$) to **increase**.\n4.  Node $X$ is the gate of $M_2$. An increase in $V_x$ increases the gate-source voltage of $M_2$ ($V_{gs2}$), causing it to conduct more current.\n5.  More current flowing through $M_2$ creates a larger voltage drop across $R_{D2}$, causing the output voltage $V_{\\text{out}}$ to **decrease**.\n6.  The decrease in $V_{\\text{out}}$ reduces the feedback current $i_{\\text{RF}}$ flowing from right to left (or increases current flowing left to right), which opposes the initial increase in $I_{\\text{in}}$.\n\nSince the output change opposes the input change, this is **negative feedback**.\n\n### 4. Transfer Function (Gain)\nFor a shunt-shunt feedback amplifier with high loop gain, the input impedance is driven towards zero (virtual ground at the input node).\n*   Ideally, the voltage at the input node (source of $M_1$) is approximately $0$ V ($V_s \\approx 0$).\n*   Applying Kirchhoff's Current Law (KCL) at the input node:\n    $$I_{\\text{in}} + I_{\\text{feedback}} = 0$$\n    $$I_{\\text{in}} + \\frac{V_{\\text{out}} - V_s}{R_F} \\approx 0$$\n    Since $V_s \\approx 0$:\n    $$I_{\\text{in}} + \\frac{V_{\\text{out}}}{R_F} \\approx 0$$\n    $$V_{\\text{out}} \\approx -I_{\\text{in}} R_F$$\n\n**Transimpedance Gain:**\n$$ \\frac{V_{\\text{out}}}{I_{\\text{in}}} \\approx -R_F $$\nThe circuit acts as a resistor with value $-R_F$ converting current to voltage. The negative sign indicates a $180^{\\circ}$ phase shift between input current and output voltage.\n\n### 5. Impedance Characteristics\nThe shunt-shunt feedback topology has specific effects on impedance:\n*   **Input Impedance ($Z_{\\text{in}}$):** The shunt mixing at the input significantly **reduces** the input impedance. Ideally, $Z_{\\text{in}} \\to 0$. In practice, it is roughly $1 / (g_{m1} \\cdot \\text{Loop Gain})$. This is desirable for current inputs as it prevents the input voltage from swinging too much, preserving bandwidth.\n*   **Output Impedance ($Z_{\\text{out}}$:** The shunt sampling at the output significantly **reduces** the output impedance. Ideally, $Z_{\\text{out}} \\to 0$. In practice, it is roughly $R_{D2} / (1 + \\text{Loop Gain})$. This allows the amplifier to drive load voltages effectively without significant loading effects.\n\n### Summary\nThis circuit is a **negative feedback transimpedance amplifier** built using two NMOS transistors. It uses a Common-Gate stage ($M_1$) for low input impedance and a Common-Source stage ($M_2$) for gain. The feedback resistor $R_F$ sets the conversion gain from current to voltage ($V_{\\text{out}} = -I_{\\text{in}} R_F$) and stabilizes the circuit operation. This topology is commonly used in optical receivers (photodiode amplifiers) and sensor interfaces.",
        "format": "markdown",
        "sha256": "e4676a47eed2b978ccea78e990a925baf6a941dee9d61b51eda4ed8dc65c200f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node. It also correctly describes negative feedback and the approximate −RF transimpedance, satisfying the full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1907,
        "output_tokens": 10946,
        "total_tokens": 12853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1907,
        "output_tokens": 10946,
        "total_tokens": 12853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9476,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis:\n\n### 1. Component Identification\n*   **Transistors:**\n    *   **$M_1$:** The arrow on the source terminal (bottom) points outward, indicating an **NMOS** transistor. Its gate is connected to a bias voltage $V_b$, its drain is connected to the output node $V_{out}$, and its source is connected to the bottom common node.\n    *   **$M_2$:** The arrow on the source terminal (top, connected to $V_{DD}$) points inward, indicating a **PMOS** transistor. Its gate is connected to the output node $V_{out}$, its source is connected to $V_{DD}$, and its drain is connected to the bottom common node.\n*   **Current Sources:**\n    *   **$I_1$:** A constant current source connected between $V_{DD}$ and the output node $V_{out}$.\n    *   **$I_{\\text{in}}$:** An input current source connected between ground and the bottom common node.\n    *   **Bottom Current Source (unlabeled, let's call it $I_{\\text{bias}}$):** A constant current source connected between the bottom common node and ground.\n\n### 2. Circuit Topology and DC Analysis\nLet's define the voltage at the bottom common node (connecting $M_2$ drain, $M_1$ source, $I_{\\text{in}}$, and $I_{\\text{bias}}$) as $V_x$.\n\n**Step 1: Analyze the $M_1$ branch**\nThe current source $I_1$ is connected in series with the drain of $M_1$. Assuming no load current at $V_{\\text{out}}$ (open circuit), the current flowing through $M_1$ is fixed at $I_1$.\n$$I_{D1} = I_1$$\nSince $M_1$ is an NMOS with a fixed gate bias $V_b$ and a fixed drain current $I_1$, its gate-source voltage $V_{GS1}$ is constant (ignoring channel-length modulation).\n$$V_{GS1} = V_x - V_b \\implies V_x = V_b + V_{GS1}$$\nThus, **$V_x$ is a constant DC voltage**. This node acts as a stable reference point.\n\n**Step 2: Analyze currents at node $V_x$**\nApply Kirchhoff's Current Law (KCL) at the bottom node $V_x$:\n*   Current entering from $M_2$ (Drain current $I_{D2}$, flowing from Source $V_{DD}$ to Drain $V_x$).\n*   Current entering from input source $I_{\\text{in}}$.\n*   Current entering from $M_1$ (Source current $I_{S1} = I_{D1} = I_1$, flowing from Drain to Source).\n*   Current leaving through the bottom bias source $I_{\\text{bias}}$.\n\n$$I_{D2} + I_{\\text{in}} + I_1 = I_{\\text{bias}}$$\nRearranging for $I_{D2}$:\n$$I_{D2} = I_{\\text{bias}} - I_1 - I_{\\text{in}}$$\nLet $I_{\\text{net}} = I_{\\text{bias}} - I_1$ (a constant bias current). Then:\n$$I_{D2} = I_{\\text{net}} - I_{\\text{in}}$$\n\n**Step 3: Analyze $M_2$ and Output Voltage $V_{\\text{out}}$**\n$M_2$ is a PMOS transistor with:\n*   Source at $V_{DD}$.\n*   Drain at $V_x$ (which is constant).\n*   Gate at $V_{\\text{out}}$.\n\nThe source-gate voltage is $V_{SG2} = V_{DD} - V_{\\text{out}}$.\nAssuming $M_2$ is in saturation, the drain current is:\n$$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{SG2} - |V_{thp}|)^2$$\n$$I_{D2} = K_p (V_{DD} - V_{\\text{out}} - |V_{thp}|)^2$$\n\nEquating the two expressions for $I_{D2}$:\n$$K_p (V_{DD} - V_{\\text{out}} - |V_{thp}|)^2 = I_{\\text{net}} - I_{\\text{in}}$$\n\nSolving for $V_{\\text{out}}$:\n$$(V_{DD} - V_{\\text{out}} - |V_{thp}|) = \\sqrt{\\frac{I_{\\text{net}} - I_{\\text{in}}}{K_p}}$$\n$$V_{\\text{out}} = V_{DD} - |V_{thp}| - \\sqrt{\\frac{I_{\\text{bias}} - I_1 - I_{\\text{in}}}{K_p}}$$\n\n### 3. Circuit Function\nThe derived equation shows the relationship between the input current $I_{\\text{in}}$ and the output voltage $V_{\\text{out}}$:\n$$V_{\\text{out}} = \\text{Constant} - \\sqrt{\\text{Constant} - I_{\\text{in}}}$$\n\n*   **Current-to-Voltage Converter (Transimpedance Amplifier):** The circuit converts the input current $I_{\\text{in}}$ into an output voltage $V_{\\text{out}}$.\n*   **Non-linear Transfer Function:** The relationship is non-linear (square root dependence).\n*   **Level Shifter:** The output voltage is shifted to be near $V_{DD}$ (specifically $V_{DD} - |V_{thp}|$).\n*   **Operation:** As the input current $I_{\\text{in}}$ increases, the term under the square root decreases, causing the subtracted value to decrease, and thus **$V_{\\text{out}}$ increases**.\n\n### 4. Small-Signal Analysis\nFor small variations around a bias point ($I_{\\text{in}} = I_{\\text{in,Q}}$ and $V_{\\text{out}} = V_{\\text{out,Q}}$):\nThe transimpedance gain (output voltage change per input current change) is approximately:\n$$\\frac{v_{\\text{out}}}{i_{\\text{in}}} \\approx \\frac{1}{g_{m2}}$$\nwhere $g_{m2}$ is the transconductance of transistor $M_2$ at the operating point. This confirms the circuit acts as a transimpedance amplifier with a gain of roughly $1/g_m$.\n\n**Summary:** This circuit is a **current-controlled voltage source** or **transimpedance amplifier** that uses a feedback loop through $M_2$ to convert an input current $I_{\\text{in}}$ into a voltage $V_{\\text{out}}$, while $M_1$ and $I_1$ provide a stable bias reference.",
        "format": "markdown",
        "sha256": "f88e2427593e2b855cf0e1c0e476e4fe849f0861c8a8afebd22d361ccfe4ce0a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout and connected back to the input node. It gives the 1/gm2 transimpedance and identifies the circuit as a TIA, meeting the golden solution’s full-credit rule; the imperfect DC narrative does not change the essential result.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1776,
        "output_tokens": 12691,
        "total_tokens": 14467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11061,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1776,
        "output_tokens": 12691,
        "total_tokens": 14467,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11061,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is a detailed analysis of its operation, DC biasing, and input-output characteristics.\n\n### 1. Component Identification\n*   **$M_1$**: An **NMOS** transistor. The arrow on the source terminal (bottom) points outward, which is characteristic of an NMOS device.\n    *   Gate is connected to a bias voltage $V_b$.\n    *   Drain is connected to the output node $V_{out}$.\n    *   Source is connected to the bottom common node.\n*   **$M_2$**: A **PMOS** transistor. The arrow on the source terminal (top, connected to $V_{DD}$) points inward (towards the channel), which is characteristic of a PMOS device.\n    *   Source is connected to $V_{DD}$.\n    *   Gate is connected to the output node $V_{out}$.\n    *   Drain is connected to the bottom common node.\n*   **Current Sources**:\n    *   $I_1$: A constant current source connected between $V_{DD}$ and $V_{out}$.\n    *   $I_{\\text{in}}$: An input current source connected to the bottom node.\n    *   Unlabeled downward current source (let's call it $I_{\\text{bias}}$): Connected to the bottom node.\n\n### 2. DC Analysis (Operating Point)\nLet's define the voltage at the bottom common node (connecting the drain of $M_2$, source of $M_1$, and the current sources) as $V_X$.\n\n**Step 1: Analyze the branch with $M_1$ and $I_1$**\n*   The current source $I_1$ forces a current $I_1$ to flow from $V_{DD}$ to the node $V_{out}$. Assuming the output terminal $V_{out}$ is open-circuit (high impedance load), this current must flow into the drain of $M_1$.\n*   Therefore, the drain current of $M_1$ is fixed: $I_{D1} = I_1$.\n*   For $M_1$ (NMOS) in saturation: $I_{D1} = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{TH1})^2$.\n*   Since $I_{D1} = I_1$ is constant and $V_{G1} = V_b$ is constant, the gate-source voltage $V_{GS1}$ is constant.\n*   $V_{GS1} = V_{G1} - V_{S1} = V_b - V_X$.\n*   This implies that **$V_X$ is a constant DC voltage**:\n    $$V_X = V_b - V_{TH1} - \\sqrt{\\frac{2I_1}{\\mu_n C_{ox} (W/L)_1}}$$\n*   Since $V_X$ is constant, the bottom node acts as a **DC voltage reference** (and effectively an AC ground for small signals, as we will see).\n\n**Step 2: Analyze currents at the bottom node ($V_X$)**\nApply Kirchhoff's Current Law (KCL) at node $V_X$:\n*   Current entering from $I_{\\text{in}}$: $I_{\\text{in}}$.\n*   Current entering from $M_2$ (drain current $I_{D2}$): Since $M_2$ is PMOS, current flows from Source ($V_{DD}$) to Drain ($V_X$). So $I_{D2}$ enters the node.\n*   Current leaving through the bias source: $I_{\\text{bias}}$.\n*   Current leaving into $M_1$ (source current $\\approx I_{D1}$): $I_1$.\n\n$$I_{\\text{in}} + I_{D2} = I_{\\text{bias}} + I_1$$\n$$I_{D2} = I_{\\text{bias}} + I_1 - I_{\\text{in}}$$\n\nThis equation shows that the current through $M_2$ is determined by the input current $I_{\\text{in}}$ and the fixed bias currents. As $I_{\\text{in}}$ increases, $I_{D2}$ decreases.\n\n**Step 3: Determine Output Voltage $V_{out}$**\n*   $M_2$ is a PMOS transistor with Source at $V_{DD}$, Gate at $V_{out}$, and Drain at $V_X$ (constant).\n*   Assuming $M_2$ is in saturation ($V_{SD2} \\ge V_{SG2} - |V_{THP}|$):\n    $$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{SG2} - |V_{THP}|)^2$$\n*   Substitute $V_{SG2} = V_{DD} - V_{out}$:\n    $$I_{D2} = K_p (V_{DD} - V_{out} - |V_{THP}|)^2$$\n    where $K_p = \\frac{1}{2} \\mu_p C_{ox} (W/L)_2$.\n\n*   Equating the expressions for $I_{D2}$:\n    $$K_p (V_{DD} - |V_{THP}| - V_{out})^2 = I_{\\text{bias}} + I_1 - I_{\\text{in}}$$\n\n*   Solving for $V_{out}$:\n    $$V_{DD} - |V_{THP}| - V_{out} = \\sqrt{\\frac{I_{\\text{bias}} + I_1 - I_{\\text{in}}}{K_p}}$$\n    $$V_{out} = V_{DD} - |V_{THP}| - \\sqrt{\\frac{I_{\\text{bias}} + I_1 - I_{\\text{in}}}{K_p}}$$\n\n### 3. Circuit Function and Transfer Characteristics\nThe circuit converts an input current $I_{\\text{in}}$ into an output voltage $V_{out}$. The relationship is non-linear.\n\n*   **Strong Inversion (Square Law):** As derived above, $V_{out}$ is proportional to the negative square root of $(I_{\\text{bias}} + I_1 - I_{\\text{in}})$. This circuit acts as a **Square Root Amplifier** or a non-linear Current-to-Voltage converter.\n*   **Subthreshold Region:** If the transistors operate in the subthreshold region (weak inversion), the current-voltage relationship is exponential ($I_D \\propto e^{V_{GS}/nV_T}$). In this case, the relationship becomes logarithmic:\n    $$V_{out} \\approx V_{DD} - n V_T \\ln\\left( \\frac{I_{\\text{bias}} + I_1 - I_{\\text{in}}}{I_{S2}} \\right)$$\n    This would make the circuit a **Logarithmic Amplifier**.\n\n### 4. Small-Signal Analysis\nLet's analyze the small-signal behavior (AC analysis) around the DC operating point.\n*   **Node $V_X$**: Since $I_1$ and $V_b$ are constant DC sources, $V_X$ is constant. Thus, $v_x = 0$ (AC ground).\n*   **Node $V_{DD}$**: AC ground.\n*   **Transistor $M_1$**: $v_{g1} = 0$ (since $V_b$ is constant), $v_{s1} = v_x = 0$. So $v_{gs1} = 0$. The dependent current source $g_{m1}v_{gs1} = 0$. $M_1$ appears as a resistor $r_{o1}$ from $V_{out}$ to ground.\n*   **Transistor $M_2$**: $v_{s2} = 0$ (at $V_{DD}$), $v_{g2} = v_{out}$. So $v_{sg2} = -v_{out}$. The drain is at $v_x = 0$. The small-signal current $i_{d2}$ (flowing from Source to Drain) is:\n    $$i_{d2} = g_{m2} v_{sg2} = -g_{m2} v_{out}$$\n\n**KCL at Node $V_X$ (AC):**\nCurrents entering = Currents leaving.\n*   Entering: $i_{\\text{in}}$ (from input source), $i_{d2}$ (from $M_2$), $i_{d1}$ (from $M_1$, which is $v_{out}/r_{o1}$).\n*   Leaving: Current into the ideal bias source $I_{\\text{bias}}$ is 0.\n\n$$i_{\\text{in}} + i_{d2} + \\frac{v_{out}}{r_{o1}} = 0$$\n$$i_{\\text{in}} - g_{m2} v_{out} + \\frac{v_{out}}{r_{o1}} = 0$$\n$$i_{\\text{in}} = v_{out} \\left( g_{m2} - \\frac{1}{r_{o1}} \\right)$$\n\nAssuming $g_{m2} \\gg 1/r_{o1}$:\n$$v_{out} \\approx \\frac{i_{\\text{in}}}{g_{m2}}$$\n\n**Conclusion:**\nThe circuit acts as a **Transconductance Amplifier ($G_m$ amplifier)** with a transconductance gain $G_m \\approx g_{m2}$.\n*   The output voltage is proportional to the input current: $V_{out} \\propto I_{\\text{in}}$.\n*   However, since $g_{m2}$ depends on the bias current $I_{D2}$ (which changes with $I_{\\text{in}}$), the gain is variable. This makes it a **Variable Gain Amplifier (VGA)** or a non-linear processing element.\n\n**Summary:**\nThis circuit is a **Current-Controlled Voltage Converter**.\n*   **DC Function:** Produces an output voltage $V_{out}$ that follows a square-root (strong inversion) or logarithmic (subthreshold) function of the input current $I_{\\text{in}}$.\n*   **AC Function:** Acts as a transconductance amplifier with gain $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "3bd6fdabfc6b5f4ef9e8e5dc69f354ba84d0a23c07e5521b23675cabb1974501"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies M1 as NMOS, M2 as PMOS driven by Vout, and obtains the approximate transimpedance 1/gm2. But it incorrectly treats the input node as an AC ground, omits the common-gate feedback loop and very low input resistance, and gives an inconsistent small-signal analysis; calling the stage a transconductance amplifier is also incorrect.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1776,
        "output_tokens": 14960,
        "total_tokens": 16736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12582,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1776,
        "output_tokens": 14960,
        "total_tokens": 16736,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12582,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is a detailed analysis of its components, operation, and function.\n\n### 1. Component Identification\n*   **Transistors:**\n    *   **$M_1$**: The arrow on the source terminal (bottom) points outward, identifying it as an **NMOS** transistor. Its gate is connected to a bias voltage $V_b$, its drain is connected to the output node $V_{\\text{out}}$, and its source is connected to the bottom common node (let's call it $V_x$).\n    *   **$M_2$**: The arrow on the source terminal (top, connected to $V_{DD}$) points inward, identifying it as a **PMOS** transistor. Its source is connected to $V_{DD}$, its gate is connected to the output node $V_{\\text{out}}$, and its drain is connected to the bottom common node $V_x$.\n*   **Current Sources:**\n    *   **$I_1$**: A constant current source connected between $V_{DD}$ and the output node $V_{\\text{out}}$, pulling current down.\n    *   **$I_{\\text{in}}$**: An input current source connected between ground and the bottom node $V_x$, pushing current up.\n    *   **Unlabeled Current Source (bottom right)**: A constant bias current source (let's call it $I_{\\text{SS}}$ or $I_{\\text{bias}}$) connected between the bottom node $V_x$ and ground, pulling current down.\n\n### 2. Circuit Topology and Connections\n*   **Output Node ($V_{\\text{out}}$):** Connected to the drain of $M_1$, the drain of current source $I_1$, and the gate of $M_2$.\n*   **Bottom Node ($V_x$):** Connected to the source of $M_1$, the drain of $M_2$, the top of $I_{\\text{in}}$, and the top of the bias current source $I_{\\text{SS}}$.\n\n### 3. DC Analysis\nLet's analyze the currents and voltages to determine the circuit's behavior. Let $V_x$ be the voltage at the bottom node.\n\n**Step 1: Analyze the Output Node ($V_{\\text{out}}$)**\nAt the output node, the current $I_1$ flows in from the top source. The gate current of $M_2$ is zero (ideal MOSFET). Therefore, all the current $I_1$ must flow into the drain of $M_1$.\n$$I_{D1} = I_1$$\nSince $I_1$ is a constant current and $M_1$ is biased by a constant voltage $V_b$, the current through $M_1$ is fixed. Assuming $M_1$ is in saturation and ignoring channel-length modulation for a moment:\n$$I_1 = \\frac{1}{2} \\mu_n C_{ox} \\left(\\frac{W}{L}\\right)_1 (V_{GS1} - V_{th,n})^2$$\nSince $V_{GS1} = V_b - V_x$, and $I_1, V_b, V_{th,n}$ are constants, the voltage $V_x$ is effectively clamped to a constant DC value:\n$$V_x \\approx V_b - V_{th,n} - \\sqrt{\\frac{2I_1}{\\mu_n C_{ox} (W/L)_1}}$$\nSo, **$V_x$ is a constant voltage**.\n\n**Step 2: Analyze the Bottom Node ($V_x$)**\nApply Kirchhoff's Current Law (KCL) at node $V_x$.\n*   **Currents entering:** $I_{\\text{in}}$ (from source), $I_{D2}$ (current from $M_2$, flowing $V_{DD} \\to V_x$), and $I_{D1}$ (current from $M_1$, flowing $V_{\\text{out}} \\to V_x$). Note that $I_{D1} = I_1$.\n*   **Currents leaving:** $I_{\\text{SS}}$ (the unlabeled downward current source).\n\n$$I_{\\text{in}} + I_{D2} + I_{D1} = I_{\\text{SS}}$$\nSubstituting $I_{D1} = I_1$:\n$$I_{\\text{in}} + I_{D2} + I_1 = I_{\\text{SS}}$$\nSolving for the current through $M_2$ ($I_{D2}$):\n$$I_{D2} = I_{\\text{SS}} - I_1 - I_{\\text{in}}$$\nThis shows that the current through the PMOS transistor $M_2$ is directly controlled by the input current $I_{\\text{in}}$. As $I_{\\text{in}}$ increases, $I_{D2}$ decreases.\n\n**Step 3: Relate $I_{D2}$ to Output Voltage ($V_{\\text{out}}$)**\n$M_2$ is a PMOS transistor operating in saturation (assuming $V_{\\text{out}}$ is within range). Its current is given by:\n$$I_{D2} = \\frac{1}{2} \\mu_p C_{ox} \\left(\\frac{W}{L}\\right)_2 (V_{SG2} - |V_{th,p}|)^2$$\nWhere $V_{SG2} = V_{\\text{Source}} - V_{\\text{Gate}} = V_{DD} - V_{\\text{out}}$.\nSubstituting $I_{D2}$:\n$$I_{\\text{SS}} - I_1 - I_{\\text{in}} = \\frac{1}{2} k_p \\left( V_{DD} - V_{\\text{out}} - |V_{th,p}| \\right)^2$$\n\nSolving for $V_{\\text{out}}$:\n$$V_{DD} - V_{\\text{out}} - |V_{th,p}| = \\sqrt{\\frac{2(I_{\\text{SS}} - I_1 - I_{\\text{in}})}{k_p (W/L)_2}}$$\n$$V_{\\text{out}} = V_{DD} - |V_{th,p}| - \\sqrt{\\frac{2(I_{\\text{SS}} - I_1 - I_{\\text{in}})}{k_p (W/L)_2}}$$\n\n### 4. Circuit Function\nFrom the derived equation:\n$$V_{\\text{out}} = \\text{Constant} - \\sqrt{\\text{Constant} - I_{\\text{in}}}$$\n\n*   As the input current **$I_{\\text{in}}$ increases**, the term under the square root $(I_{\\text{SS}} - I_1 - I_{\\text{in}})$ decreases.\n*   Consequently, the subtracted square root term decreases.\n*   Therefore, **$V_{\\text{out}}$ increases**.\n\n**Conclusion:**\nThis circuit is a **Transimpedance Amplifier (TIA)** or a **Current-to-Voltage Converter**. It takes an input current $I_{\\text{in}}$ and produces a corresponding output voltage $V_{\\text{out}}$. The relationship is non-linear (square root dependence), but it effectively converts a current signal into a voltage signal. The feedback through the gate of $M_2$ (connected to $V_{\\text{out}}$) is crucial for setting the operating point and determining the output voltage based on the current balance at the bottom node.",
        "format": "markdown",
        "sha256": "07c3be818ad7cfe4a8930a0754b89642b2b5f4bc3eda562037404d24e8cc8ee8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS input device, the PMOS feedback device, and the feedback path from Vout to the input node. Its current-to-voltage/TIA interpretation satisfies the golden solution’s equivalent transimpedance criterion; the square-law derivation is a reasonable idealized model.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1776,
        "output_tokens": 13279,
        "total_tokens": 15055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1776,
        "output_tokens": 13279,
        "total_tokens": 15055,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11573,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the answer:\n\n**Yes, the circuit fails to oscillate if the capacitors become arbitrarily large (approaching infinity).**\n\nHere is the step-by-step reasoning:\n\n1.  **Circuit Identification:** The circuit shown is a **ring oscillator**. It consists of an odd number (three) of inverters connected in a series loop with feedback from the output of the last inverter to the input of the first. An odd number of inverters creates a negative feedback loop that is inherently unstable, meaning it cannot settle into a stable static state (like all 0s or all 1s) and is designed to oscillate.\n\n2.  **Role of Capacitors:** The capacitors $C_L$ represent load capacitances at the output of each inverter. Together with the output resistance of the inverters ($R_{out}$), they form RC low-pass filters. These RC time constants ($\\tau = R_{out} C_L$) determine the propagation delay of the signal through each stage. The oscillation frequency $f$ is inversely proportional to the total delay around the loop, and thus inversely proportional to the capacitance $C_L$ (roughly $f \\propto 1/C_L$).\n\n3.  **Effect of Arbitrarily Large Capacitors:**\n    *   As the capacitance $C_L$ increases, the time constant $\\tau$ increases. This means it takes longer for the voltage at each node to charge or discharge to the logic levels required to switch the next inverter.\n    *   The period of oscillation $T$ is proportional to $C_L$ ($T \\approx 2 \\cdot N \\cdot R_{out} C_L \\cdot \\text{constant}$).\n    *   If the capacitors become **arbitrarily large** (i.e., $C_L \\to \\infty$), the time constant $\\tau \\to \\infty$.\n    *   Consequently, the time it takes for the signal to propagate around the loop becomes infinite. The frequency of oscillation approaches zero ($f \\to 0$).\n\n4.  **Conclusion:** In the limit where $C_L$ is infinite, the voltage at the nodes changes infinitely slowly ($dV/dt = I/C \\to 0$). The circuit would take an infinite amount of time to complete a single switching cycle. Therefore, in any practical or finite time frame, the circuit does not oscillate; it effectively gets stuck in a quasi-static state (likely the metastable equilibrium point where all inputs are at $V_{DD}/2$) or changes state so slowly that oscillation is not observed. Thus, it fails to oscillate.",
        "format": "markdown",
        "sha256": "1100bcd55706c2bac384aed0e3749d217a03399ff05e143401beece432f62a5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the ring oscillator and explains that increasing capacitance lowers the frequency, but it contradicts the central result: equal capacitors at all three nodes do not stop oscillation; they only slow it. The golden solution caps such answers at 1.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1813,
        "output_tokens": 12802,
        "total_tokens": 14615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12230,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1813,
        "output_tokens": 12802,
        "total_tokens": 14615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12230,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit fails to oscillate if the capacitors $C_L$ become arbitrarily large.\n\nHere is the step-by-step analysis:\n\n1.  **Circuit Identification**: The circuit shown is a **ring oscillator** consisting of three inverters (NOT gates) connected in a loop. For a ring oscillator to function, it must have an odd number of inverting stages (here, $N=3$) to provide a total phase shift of $180^\\circ$ (or an odd multiple thereof) around the loop, creating positive feedback.\n\n2.  **Oscillation Mechanism**: A ring oscillator works by continuously switching between two unstable states. The time it takes to switch is determined by the propagation delay through each stage. Each stage consists of an inverter and a load capacitor $C_L$. The delay $\\tau$ of a single stage is approximately proportional to the product of the inverter's output resistance ($R_{out}$) and the load capacitance ($C_L$), i.e., $\\tau \\approx R_{out} C_L$.\n\n3.  **Frequency of Oscillation**: The total period of oscillation $T$ for a 3-stage ring oscillator is roughly $T \\approx 2 \\cdot N \\cdot \\tau = 6 R_{out} C_L$. The frequency of oscillation is $f = 1/T \\approx \\frac{1}{6 R_{out} C_L}$.\n\n4.  **Effect of Large Capacitors**:\n    *   As $C_L \\to \\infty$, the time constant $\\tau \\to \\infty$.\n    *   Consequently, the period $T \\to \\infty$ and the frequency $f \\to 0$.\n    *   Physically, the large capacitors take an infinitely long time to charge and discharge. The voltage at the nodes changes infinitely slowly. The circuit will take an infinite amount of time to switch from one state to another.\n\n5.  **Stability Analysis (Barkhausen Criterion)**:\n    *   For a sinusoidal oscillation to occur, the loop gain magnitude must be $\\ge 1$ and the total phase shift must be $180^\\circ$ (mod $360^\\circ$) at the oscillation frequency.\n    *   The transfer function of each stage with a capacitor is a low-pass filter: $H(s) = \\frac{-A_0}{1 + s\\tau}$.\n    *   The total loop gain is $L(s) = H(s)^3 = \\frac{-A_0^3}{(1 + s\\tau)^3}$.\n    *   The phase shift is $\\angle L(j\\omega) = 180^\\circ - 3\\arctan(\\omega\\tau)$.\n    *   For oscillation, we need the phase to be $180^\\circ$ (mod $360^\\circ$). This only happens when $\\arctan(\\omega\\tau) = 0$, which implies $\\omega = 0$ (DC).\n    *   At $\\omega = 0$, the loop gain is $A_0^3$. Since inverters have high DC gain ($A_0 \\gg 1$), the loop gain is much greater than 1. This confirms the circuit is unstable at DC and will try to switch states.\n    *   However, as $\\omega$ increases, the phase shift decreases (becomes more negative lag). The phase never reaches $180^\\circ + 360^\\circ = 540^\\circ$ or $180^\\circ - 360^\\circ = -180^\\circ$ for any $\\omega > 0$ (it ranges from $180^\\circ$ down to $-90^\\circ$). Thus, the condition for sustained sinusoidal oscillation is never met for any finite frequency.\n    *   The circuit relies on non-linear switching. The time to switch is proportional to $C_L$. If $C_L$ is arbitrarily large, the switching time is infinite.\n\n**Conclusion**: As the capacitors become arbitrarily large, the oscillation frequency approaches zero. The circuit takes an infinite amount of time to complete a cycle, effectively meaning it gets stuck in a state and **fails to oscillate**.",
        "format": "markdown",
        "sha256": "187d4b2f9e055a0f92ade3db5ced0fa78d2ae578c570eecf34792fd368d82fce"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly recognizes that larger capacitors slow the stages and drive frequency downward, but concludes that the ring fails to oscillate, contrary to the central result. Its Barkhausen phase analysis also misses the finite-frequency oscillation condition.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1813,
        "output_tokens": 9713,
        "total_tokens": 11526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1813,
        "output_tokens": 9713,
        "total_tokens": 11526,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit diagram, here is the answer:\n\n**Yes, the circuit fails to oscillate (or effectively stops oscillating) if the capacitors become arbitrarily large.**\n\nHere is the detailed explanation:\n\n1.  **Circuit Identification:** The circuit shown is a **ring oscillator**. It consists of an odd number (three) of inverting logic gates (inverters) connected in a series loop. The output of the last inverter is fed back to the input of the first. This configuration is designed to oscillate because the total phase shift around the loop is $180^\\circ \\times 3 = 540^\\circ$, which is equivalent to $180^\\circ$ (positive feedback), satisfying the condition for oscillation.\n\n2.  **Role of Capacitors ($C_L$):** The capacitors $C_L$ act as load capacitances. In a ring oscillator, the frequency of oscillation is determined by the propagation delay of each inverter stage. This delay is primarily caused by the time required to charge and discharge these load capacitors through the output resistance of the transistors. The time constant for each stage is approximately $\\tau = R_{eq} C_L$.\n\n3.  **Frequency Relationship:** The period of oscillation $T$ for a 3-stage ring oscillator is approximately proportional to the total delay:\n    $$T \\approx 2 \\cdot N \\cdot t_p \\approx 6 \\cdot R_{eq} \\cdot C_L$$\n    where $N=3$ is the number of stages.\n    The frequency of oscillation $f$ is the inverse of the period:\n    $$f = \\frac{1}{T} \\approx \\frac{1}{6 R_{eq} C_L}$$\n\n4.  **Effect of Arbitrarily Large Capacitors:**\n    *   As the capacitance $C_L$ becomes arbitrarily large ($C_L \\to \\infty$), the time constant $\\tau$ becomes infinitely large.\n    *   Consequently, the period of oscillation $T$ approaches infinity ($T \\to \\infty$).\n    *   The frequency of oscillation $f$ approaches zero ($f \\to 0$).\n\n5.  **Linear Stability Analysis (Phase Shift):**\n    From a small-signal linear perspective, each inverter with a load capacitor acts as a low-pass filter (single-pole system), introducing a phase shift of up to $90^\\circ$.\n    *   Total phase shift from 3 stages = $3 \\times 90^\\circ = 270^\\circ$.\n    *   Total phase shift including inversion ($180^\\circ$) = $180^\\circ + 270^\\circ = 450^\\circ$ (which is $90^\\circ$ modulo $360^\\circ$).\n    *   For sustained oscillation at a finite frequency, the total phase shift typically needs to be $180^\\circ + 360^\\circ = 540^\\circ$ (or $180^\\circ$). Since the maximum possible phase shift ($450^\\circ$) is less than $540^\\circ$, there is no finite frequency where the phase condition for oscillation is met in a linear model. The circuit relies on non-linear \"relaxation\" oscillation.\n\n**Conclusion:**\nAs the capacitors become arbitrarily large, the time it takes for the circuit to switch states becomes infinite. The oscillation frequency drops to zero. Therefore, the circuit **fails to oscillate** in any practical sense; it would effectively remain in a static state (or change state infinitely slowly).",
        "format": "markdown",
        "sha256": "ccb11ef78423a3ebf4c13441d5ce3dc5495351ab9ee7dd121fcf29571dac04f0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly notes that larger load capacitance lowers the frequency, but concludes the ring fails to oscillate. The ring continues oscillating at a lower frequency; the small-signal phase analysis is also incorrect.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1813,
        "output_tokens": 9328,
        "total_tokens": 11141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1813,
        "output_tokens": 9328,
        "total_tokens": 11141,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8540,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the analysis of what happens when the three capacitors ($C_L$) are doubled:\n\n**1. Identification of the Circuit**\nThe circuit shown is a **3-stage ring oscillator**. It consists of three inverters connected in a loop. Since the number of stages ($N=3$) is odd, the circuit is unstable and produces a continuous oscillating output.\n\n**2. Effect on Oscillation Frequency**\nThe oscillation frequency ($f_{osc}$) of a ring oscillator is inversely proportional to the total propagation delay through the loop. The delay of each inverter stage is roughly proportional to the load capacitance ($C_L$).\n*   Formula: $f_{osc} \\approx \\frac{1}{2 \\cdot N \\cdot t_d} \\propto \\frac{1}{C_L}$\n*   If the capacitors $C_L$ are **doubled**, the delay of each stage doubles. Consequently, the total period doubles, and the **oscillation frequency is halved**.\n\n**3. Effect on Phase Noise**\nPhase noise is a measure of the frequency stability of the oscillator. In oscillators, the phase noise is generally inversely related to the energy stored in the oscillating system.\n*   **Energy Storage:** The energy stored in the capacitive load is given by $E = \\frac{1}{2} C_L V^2$. If $C_L$ is doubled, the stored energy doubles.\n*   **Noise Immunity:** A larger stored energy makes the oscillation more robust against thermal noise and other perturbations from the transistors. The signal-to-noise ratio (SNR) improves.\n*   **Scaling Law:** For a ring oscillator, the phase noise ($\\mathcal{L}$) is approximately inversely proportional to the load capacitance ($C_L$). Specifically, $\\mathcal{L} \\propto \\frac{1}{C_L}$.\n*   **Result:** Doubling the capacitance reduces the phase noise variance by half. In decibels (dB), this corresponds to an improvement (decrease) of approximately **3 dB** ($10 \\log_{10}(2) \\approx 3$). Some more detailed models (like the Hajimiri-Lee model) suggest phase noise can improve by up to 6 dB ($\\propto 1/C_L^2$) because the noise current is integrated over a larger capacitance.\n\n**Summary:**\nIf the three capacitors are doubled:\n*   The **oscillation frequency decreases** (it is halved).\n*   The **phase noise decreases** (it improves), typically by about 3 dB to 6 dB, because the larger capacitors store more energy and filter out noise more effectively.",
        "format": "markdown",
        "sha256": "66ef7fb494b2fafa0c63f817d3fa079d606fe7603396e63cbcc38aff8c2a199d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly predicts that doubling the capacitors halves the oscillation frequency and lowers phase noise, but its main quantitative conclusion is a factor of two (3 dB) reduction. The expected result is about a factor of four (6 dB) lower phase noise at a fixed offset; mentioning 6 dB only as a possible alternative does not establish that result.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1811,
        "output_tokens": 11764,
        "total_tokens": 13575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1811,
        "output_tokens": 11764,
        "total_tokens": 13575,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11171,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of what happens when the three capacitors ($C_L$) are doubled:\n\n**1. Identification of the Circuit**\nThe circuit shown is a **3-stage ring oscillator**. It consists of three inverters connected in a feedback loop. This is a common topology for generating clock signals in digital circuits.\n\n**2. Effect on Oscillation Frequency**\nThe frequency of oscillation ($f_{osc}$) for an $N$-stage ring oscillator is inversely proportional to the propagation delay ($t_p$) of each stage and the number of stages ($N$).\n*   The propagation delay $t_p$ is roughly proportional to the load capacitance $C_L$ (since $t_p \\approx \\frac{C_L \\cdot V_{DD}}{I_{drive}}$).\n*   The period $T = 2 \\cdot N \\cdot t_p$.\n*   Therefore, $f_{osc} = \\frac{1}{T} \\propto \\frac{1}{C_L}$.\n\nIf the capacitors $C_L$ are **doubled**, the delay of each stage doubles, the period doubles, and the **oscillation frequency is halved** ($f_{new} = f_{old} / 2$).\n\n**3. Effect on Phase Noise**\nPhase noise in an oscillator is a measure of the short-term frequency stability. In a ring oscillator, it is primarily determined by the noise injected by the transistors (thermal noise) relative to the signal energy.\n\n*   **Signal Energy:** The energy stored in the oscillation at each node is proportional to $C_L \\cdot V^2$. If you double $C_L$ (assuming the voltage swing $V$ remains roughly constant), the signal energy per cycle doubles.\n*   **Noise Voltage:** The voltage noise ($\\Delta V$) on a capacitor due to thermal noise is given by the kT/C noise formula, $\\Delta V \\approx \\sqrt{kT/C_L}$. If $C_L$ is doubled, the noise voltage decreases by a factor of $\\sqrt{2}$.\n*   **Phase Noise Scaling:** A common approximation for the phase noise ($\\mathcal{L}$) of a ring oscillator is that it is inversely proportional to the load capacitance (for a constant current drive).\n    $$ \\mathcal{L} \\propto \\frac{kT}{C_L V^2} $$\n    Alternatively, looking at jitter: The time jitter ($\\sigma_t$) is roughly constant or increases slightly ($\\propto \\sqrt{C_L}$), but since the period ($T$) doubles ($\\propto C_L$), the relative jitter (phase jitter $\\sigma_\\phi = 2\\pi f \\sigma_t$) decreases. Since phase noise is proportional to the square of the phase jitter ($\\mathcal{L} \\propto \\sigma_\\phi^2$), and $\\sigma_\\phi \\propto 1/\\sqrt{C_L}$, the phase noise scales as $1/C_L$.\n\n**Conclusion**\nIf the three capacitors are doubled:\n1.  The **oscillation frequency is halved**.\n2.  The **phase noise decreases** (improves). Specifically, it is reduced by a factor of **2** (or **3 dB**).\n\nIn summary, increasing the load capacitance in a ring oscillator slows it down but improves its phase noise performance because the larger capacitors act as better filters for noise and store more signal energy relative to the noise floor.",
        "format": "markdown",
        "sha256": "f94152de2bfa65a3b8542441f09925d4f4eca08b8f3dd76f3bdbfdb6326e08b2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly says doubling the capacitors halves the oscillation frequency and lowers phase noise, but gives a 3 dB reduction rather than the expected roughly 6 dB (factor of four) at a fixed offset frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1811,
        "output_tokens": 10941,
        "total_tokens": 12752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1811,
        "output_tokens": 10941,
        "total_tokens": 12752,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is the analysis of what happens to the phase noise when the three capacitors $C_L$ are doubled.\n\n**1. Circuit Identification**\nThe circuit shown is a **ring oscillator**. It consists of an odd number ($N=3$) of inverting stages (inverters) connected in a loop. This configuration creates a negative feedback loop with a total phase shift of $180^\\circ \\times 3 = 540^\\circ$ (equivalent to $180^\\circ$), which allows the circuit to oscillate.\n\n**2. Effect on Oscillation Frequency**\nThe oscillation frequency $f_0$ of a ring oscillator is determined by the propagation delay $\\tau_p$ of each inverter stage. The delay is proportional to the load capacitance $C_L$ and the drive current $I$ of the inverter ($\\tau_p \\approx \\frac{C_L V_{DD}}{I}$).\nThe period of oscillation $T$ is given by $T = 2N\\tau_p$.\nTherefore, the frequency is:\n$$f_0 = \\frac{1}{T} \\propto \\frac{1}{C_L}$$\nIf the capacitors $C_L$ are doubled ($C_L' = 2C_L$), the delay of each stage doubles, the period doubles, and the **oscillation frequency is halved** ($f_0' = f_0 / 2$).\n\n**3. Effect on Phase Noise**\nTo determine the effect on phase noise, we can look at the energy balance or scaling laws for ring oscillators.\n\n*   **Energy Argument:** The signal energy stored in the capacitive load during one cycle is proportional to $C_L V_{DD}^2$ ($E_{signal} \\propto C_L$). The noise floor is primarily determined by thermal noise ($kT$), which is constant. Phase noise $\\mathcal{L}(\\Delta f)$ is inversely proportional to the ratio of signal energy to noise energy.\n    $$\\mathcal{L}(\\Delta f) \\propto \\frac{kT}{E_{signal}} \\propto \\frac{1}{C_L}$$\n    If $C_L$ is doubled, the signal energy doubles, improving the signal-to-noise ratio. Consequently, the **phase noise is reduced by a factor of 2 (or 3 dB)**.\n\n*   **Jitter Argument:**\n    *   The timing jitter (uncertainty in switching time) $\\sigma_t$ is inversely proportional to the slew rate ($dV/dt$). Since $dV/dt = I/C_L$, doubling $C_L$ halves the slew rate, causing the timing jitter to double ($\\sigma_t' = 2\\sigma_t$).\n    *   The phase jitter $\\sigma_\\phi$ is related to timing jitter by $\\sigma_\\phi = 2\\pi f_0 \\sigma_t$.\n    *   Since $f_0$ is halved and $\\sigma_t$ is doubled, the product remains constant: $\\sigma_\\phi' = 2\\pi (f_0/2) (2\\sigma_t) = \\sigma_\\phi$. So, the total phase jitter variance is constant.\n    *   However, phase noise spectral density $\\mathcal{L}(\\Delta f)$ for a random walk process (white noise) scales as $1/T$ (or $1/\\text{period}$). Since the period $T$ doubles, the phase noise spectral density is halved.\n\n**Conclusion**\nIf the three capacitors $C_L$ are doubled:\n1.  The oscillation frequency is **halved**.\n2.  The **phase noise decreases (improves) by 3 dB** (it is reduced by a factor of 2).",
        "format": "markdown",
        "sha256": "71c78d1731700a395b0c0a8e94b3df5817b16fff5a1c716b98a8606cc7d23d16"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies that doubling the capacitors halves the oscillation frequency and that phase noise improves, but gives a 3 dB reduction instead of the correct approximately 6 dB reduction at a fixed offset frequency.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1811,
        "output_tokens": 10320,
        "total_tokens": 12131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9496,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1811,
        "output_tokens": 10320,
        "total_tokens": 12131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9496,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit fails to oscillate if $C_L$ becomes arbitrarily large.\n\nHere is the step-by-step analysis:\n\n1.  **Circuit Identification**: The circuit shown is a **3-stage ring oscillator**. It consists of three inverters connected in a series loop (the output of the third inverter feeds back to the input of the first). The capacitor $C_L$ is connected at the output of the first inverter (and input of the second), acting as a load capacitance.\n\n2.  **Oscillation Conditions**: For a ring oscillator to oscillate, two main conditions must be met (Barkhausen stability criteria):\n    *   **Phase Condition**: The total phase shift around the loop must be $0^\\circ$ or $360^\\circ$ (an even multiple of $180^\\circ$). Since each inverter provides a $180^\\circ$ phase shift, three inverters provide $3 \\times 180^\\circ = 540^\\circ \\equiv 180^\\circ$. Wait, for oscillation in a feedback loop, we need positive feedback. The loop is $V_{out} \\rightarrow \\text{Inverter 3} \\rightarrow \\text{Inverter 2} \\rightarrow \\text{Inverter 1} \\rightarrow V_{out}$. The total inversion is 3, so the feedback is effectively negative ($180^\\circ$ shift). However, in a ring oscillator, the \"negative\" feedback at DC creates an unstable equilibrium (metastable state), forcing the circuit to switch states, which creates oscillation. More formally, the loop gain $L(s)$ must have a phase of $180^\\circ$ (total $360^\\circ$) at the oscillation frequency. With 3 inverters, the base phase shift is $180^\\circ$. The poles from the capacitances add phase lag. We need the total phase lag to be $180^\\circ$ (so total is $360^\\circ$).\n    *   **Gain Condition**: The magnitude of the loop gain $|A\\beta|$ must be greater than or equal to 1 ($|L(j\\omega)| \\ge 1$) at the frequency where the phase condition is met.\n\n3.  **Effect of $C_L$**: The capacitor $C_L$ adds a load to the first inverter stage. This increases the RC time constant ($\\tau = R_{out} \\cdot C_{load}$) of that stage, effectively lowering its cutoff frequency and adding a dominant pole to the system's transfer function.\n    *   The transfer function of the loop can be approximated as $L(s) = \\frac{-A_0^3}{(1+s\\tau_1)(1+s\\tau_2)(1+s\\tau_3)}$, where $\\tau_1$ is proportional to $C_L$.\n    *   As $C_L \\to \\infty$, $\\tau_1 \\to \\infty$.\n\n4.  **Analysis of Failure**:\n    *   **Loop Gain Drop**: As $C_L$ increases, the bandwidth of the first stage decreases. At any potential oscillation frequency, the gain of the first stage drops significantly due to the capacitive load. Eventually, the total loop gain magnitude $|L(j\\omega)|$ drops below 1. When the loop gain is less than 1, the circuit cannot sustain oscillations; any perturbation will decay rather than grow.\n    *   **Stability**: When the loop gain drops below 1, the metastable state (where all node voltages are at $V_{DD}/2$) becomes stable. Instead of switching back and forth between logic high and low, the circuit will settle into this static DC state (or stay there, limited by noise).\n    *   **Frequency**: Even if we consider the non-linear switching behavior, the period of oscillation $T$ is proportional to the total delay, which is proportional to $C_L$. As $C_L \\to \\infty$, the period $T \\to \\infty$ and the frequency $f \\to 0$. An oscillation with zero frequency is effectively a static state, meaning the circuit has failed to oscillate.\n\n**Conclusion**:\nYes, if $C_L$ becomes arbitrarily large, the loop gain drops below unity, and the oscillation frequency approaches zero. The circuit will settle to a stable metastable state (all voltages at the logic threshold) and **fail to oscillate**.",
        "format": "markdown",
        "sha256": "b1bdd817f8e09c77ddb75a6840b5a326d5eb7f7e9f8445345c0f2e2e62ce2a97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading at one node creates a dominant pole, causing loop-gain roll-off and loss of sustained oscillation. The specific phase and metastable-state descriptions are secondary idealizations and do not undermine the essential explanation.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 12763,
        "total_tokens": 14481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 12763,
        "total_tokens": 14481,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11795,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit fails to oscillate if $C_L$ becomes arbitrarily large.\n\nHere is the step-by-step analysis:\n\n1.  **Circuit Identification**: The circuit shown is a **ring oscillator** consisting of three inverters connected in a loop. An odd number of inverters in a feedback loop creates a condition for instability, which typically results in oscillation. The frequency of oscillation is determined by the propagation delay of the inverters.\n\n2.  **Role of $C_L$**: The capacitor $C_L$ is connected at the output of the first inverter. It acts as a load capacitance. The propagation delay of an inverter is proportional to the load capacitance ($t_{pd} \\approx R_{eq} C_{load}$). Therefore, increasing $C_L$ increases the delay of the first stage. In the frequency domain, this adds a pole to the system's transfer function at a frequency $\\omega_{p1} = \\frac{1}{R_{out} C_L}$.\n\n3.  **Oscillation Conditions (Barkhausen Criterion)**: For the circuit to oscillate, two conditions must be met at some frequency $\\omega$:\n    *   **Phase Condition**: The total phase shift around the loop must be $0^\\circ$ or $360^\\circ$. Three inverters provide $3 \\times 180^\\circ = 540^\\circ$. The additional phase lag from the poles (capacitors) must make up the difference to reach $360^\\circ$ (i.e., a total lag of $180^\\circ$). Since each pole can contribute up to $90^\\circ$ of lag, three poles can contribute up to $270^\\circ$, so a phase crossover frequency can exist.\n    *   **Gain Condition**: The magnitude of the loop gain $|A\\beta|$ must be greater than or equal to 1 ($|A\\beta| \\ge 1$).\n\n4.  **Effect of Arbitrarily Large $C_L$**:\n    *   As $C_L \\to \\infty$, the time constant $\\tau_1 = R_{out} C_L \\to \\infty$, and the pole frequency $\\omega_{p1} \\to 0$.\n    *   The loop gain magnitude is given by $|L(j\\omega)| = \\frac{A^3}{\\sqrt{1+(\\omega\\tau_1)^2}\\sqrt{1+(\\omega\\tau_2)^2}\\sqrt{1+(\\omega\\tau_3)^2}}$.\n    *   As $\\tau_1 \\to \\infty$, the term $\\sqrt{1+(\\omega\\tau_1)^2}$ becomes very large (approaches $\\omega\\tau_1$). Consequently, the total loop gain magnitude $|L(j\\omega)|$ approaches **zero** for any finite frequency $\\omega$.\n    *   Since the loop gain drops below 1 ($|L| < 1$), the **gain condition for oscillation is no longer met**.\n\n5.  **Conclusion**: When $C_L$ is large enough, the feedback loop gain is insufficient to sustain oscillations. The circuit becomes stable (the poles of the characteristic equation move into the left half of the s-plane) and the circuit will settle into a stable DC state (likely an intermediate voltage level where the inverters are in their linear region) rather than oscillating. Therefore, the circuit **fails to oscillate**.",
        "format": "markdown",
        "sha256": "e6e07e2fce9fe10561fa9fce344a2ee4b3f81fc125d704953d399fd694c5d3d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large CL at one node creates a dominant low-frequency pole, reducing loop gain at the phase-crossover frequency until the Barkhausen condition fails. The simplified phase and stability details do not undermine the essential explanation.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 10858,
        "total_tokens": 12576,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 10858,
        "total_tokens": 12576,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10115,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the circuit will fail to oscillate if $C_L$ becomes arbitrarily large.\n\nHere is the step-by-step analysis:\n\n1.  **Circuit Identification**: The circuit shown is a **ring oscillator** consisting of three inverters connected in a loop. An odd number of inverting stages in a feedback loop creates positive feedback, which is the necessary condition for oscillation.\n\n2.  **Oscillation Condition**: For a ring oscillator to oscillate, the signal must propagate around the loop and return to the input with sufficient gain (loop gain $\\ge 1$) and the correct phase shift. In a simplified linear model, each inverter can be modeled as a gain $A_0$ with a single-pole low-pass filter response (due to internal capacitance and load capacitance).\n    *   Let the time constants of the three stages be $\\tau_1, \\tau_2, \\tau_3$.\n    *   The capacitor $C_L$ is connected to the output of the first inverter, so it primarily affects the time constant of the first stage: $\\tau_1 \\approx R_{eq} \\cdot (C_{internal} + C_L)$.\n\n3.  **Effect of Increasing $C_L$**:\n    *   As $C_L$ increases, the time constant $\\tau_1$ increases. This increases the propagation delay of the first stage and introduces more phase lag.\n    *   The oscillation frequency is roughly inversely proportional to the total delay ($T \\approx 2 \\cdot N \\cdot \\tau_{delay}$). So, increasing $C_L$ decreases the frequency of oscillation.\n\n4.  **Limit as $C_L \\to \\infty$**:\n    *   Mathematically, the stability of the circuit is determined by the roots of the characteristic equation $1 - A_1(s)A_2(s)A_3(s) = 0$. For oscillation, we need roots in the Right Half Plane (RHP).\n    *   The loop gain magnitude at a frequency $\\omega$ is roughly $|A_{loop}| \\approx \\frac{A_0^3}{\\omega \\tau_1 \\dots}$. As $\\tau_1 \\to \\infty$ (due to large $C_L$), the loop gain at any finite frequency approaches zero.\n    *   Specifically, the phase lag introduced by the first stage approaches $90^\\circ$ ($\\arctan(\\omega \\tau_1) \\to 90^\\circ$). The total phase shift from the three poles approaches $270^\\circ$. Combined with the $180^\\circ$ from the three inversions, the total phase behavior changes such that the Barkhausen criterion for oscillation (loop gain $\\ge 1$ at phase shift $= 180^\\circ$ or $360^\\circ$ depending on definition) can no longer be met.\n    *   More formally, using the Routh-Hurwitz stability criterion on the characteristic polynomial, as $\\tau_1$ becomes very large, the coefficients change such that all roots move to the Left Half Plane (LHP). This means the system becomes **stable**.\n\n5.  **Conclusion**: When the system becomes stable, it no longer oscillates. Instead, it will settle into a steady DC state (specifically, a metastable state where the voltages at the nodes are roughly equal, determined by the transfer characteristics of the inverters). Therefore, an arbitrarily large $C_L$ causes the circuit to stop oscillating.\n\n**Answer: Yes**",
        "format": "markdown",
        "sha256": "93b211e8714fba6c9ebfd10295bb0a47157b097ae2ef9f2184466c4075a58270"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node can stop oscillation and identifies the resulting dominant time constant and loss of loop gain. The phase discussion is imprecise, but the golden solution treats exact phase explanations as secondary and the central reasoning is sound.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 11911,
        "total_tokens": 13629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1718,
        "output_tokens": 11911,
        "total_tokens": 13629,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11147,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram and the principles of analog/RF design, here is the step-by-step analysis:\n\n1.  **Identify the Circuit:** The figure shows three CMOS inverters connected in a loop (output of the last inverter feeds the input of the first). This is a **3-stage ring oscillator**.\n\n2.  **Effect on Frequency:**\n    *   The oscillation frequency of a ring oscillator is determined by the propagation delay ($t_p$) of each inverter stage. $f_{osc} \\approx \\frac{1}{2N t_p}$, where $N=3$.\n    *   The propagation delay is approximately proportional to the load capacitance ($C_L$) divided by the drive current ($I_{drive}$): $t_p \\propto \\frac{C_L}{I_{drive}}$.\n    *   **Capacitance ($C_L$):** The load capacitance is primarily the input gate capacitance of the next stage. Since gate capacitance $C_{gate} \\propto W$ (width), doubling the width doubles the capacitance ($C_L \\rightarrow 2C_L$).\n    *   **Current ($I_{drive}$):** The drive current of a MOSFET in saturation is proportional to its width ($I_D \\propto W$). Doubling the width doubles the current ($I_{drive} \\rightarrow 2I_{drive}$).\n    *   **Result:** Since both the numerator ($C_L$) and the denominator ($I_{drive}$) double, the ratio remains constant. Therefore, the propagation delay $t_p$ and the **oscillation frequency remain approximately the same**.\n\n3.  **Effect on Power and Signal Energy:**\n    *   The dynamic power consumption of a CMOS circuit is given by $P = C V_{DD}^2 f$.\n    *   Since the capacitance $C$ (total switching capacitance) has doubled and the frequency $f$ is constant, the **power consumption doubles**.\n    *   The energy per cycle ($E = P/f$) also doubles. The signal energy stored in the parasitic capacitances is $E_{signal} = \\frac{1}{2} C V_{DD}^2$. Since $C$ doubles, the signal energy per cycle increases.\n\n4.  **Effect on Phase Noise:**\n    *   Phase noise in an oscillator is fundamentally related to the signal-to-noise ratio (SNR). A common approximation for phase noise $\\mathcal{L}$ is that it is inversely proportional to the signal power or the energy per cycle ($\\mathcal{L} \\propto \\frac{1}{E_{cycle}}$ or $\\frac{1}{P_{signal}}$).\n    *   While the thermal noise current ($i_n^2 = 4kT\\gamma g_m$) increases because transconductance $g_m \\propto W$ increases, the signal current ($I_{signal} \\propto W$) increases as well.\n    *   The SNR scales roughly with $W$ (Signal Power $\\propto W^2$, Noise Power $\\propto W$, so SNR $\\propto W$).\n    *   Therefore, increasing the device widths (and consequently the power consumption) while keeping the frequency constant improves the SNR.\n\n**Conclusion:**\nDoubling the widths of the NMOS and PMOS devices will cause the **phase noise to decrease** (i.e., the phase noise performance improves). Specifically, it would improve by approximately 3 dB, as the energy per cycle doubles while the frequency remains constant. The oscillation frequency itself will remain largely unchanged.",
        "format": "markdown",
        "sha256": "5b7fd91716faf7d7db5f02559d24a800827fffcfd8339d18663689eede0039cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling all device widths reduces phase noise by about 3 dB. Its scaling argument is consistent: signal power grows by four while device noise power grows by two, with frequency roughly unchanged.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2532,
        "output_tokens": 6538,
        "total_tokens": 9070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2532,
        "output_tokens": 6538,
        "total_tokens": 9070,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5762,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, here is the analysis:\n\n1.  **Identify the Circuit:** The figure shows three inverters connected in a loop (output of the last inverter feeds the input of the first). This is a **3-stage Ring Oscillator**.\n\n2.  **Effect on Oscillation Frequency:**\n    *   The oscillation frequency of a ring oscillator is determined by the propagation delay ($t_d$) of each inverter stage. $f_{osc} \\approx \\frac{1}{2N t_d}$, where $N=3$.\n    *   The propagation delay is approximately $t_d \\approx \\frac{C_L \\cdot V_{DD}}{I_{drive}}$.\n    *   In a ring oscillator, the load capacitance ($C_L$) is primarily the input gate capacitance of the next inverter stage. Since $C_{in} \\propto W \\cdot L$, doubling the width $W$ **doubles the load capacitance** ($C_L \\propto W$).\n    *   The drive current ($I_{drive}$) of a MOS transistor is proportional to its width ($I_{drive} \\propto W$).\n    *   Therefore, if we double $W$, both $C_L$ and $I_{drive}$ double. The ratio $\\frac{C_L}{I_{drive}}$ remains roughly constant.\n    *   Consequently, the propagation delay $t_d$ remains constant, and the **oscillation frequency remains unchanged**.\n\n3.  **Effect on Phase Noise:**\n    *   **Power Consumption:** The dynamic power consumption is $P \\approx C_L \\cdot V_{DD}^2 \\cdot f_{osc}$. Since $C_L$ doubles and $f_{osc}$ is constant, the power consumption **doubles**. Generally, higher power consumption leads to better signal-to-noise ratio (SNR) and lower phase noise.\n    *   **Noise Analysis:** The noise voltage at the output node is roughly proportional to $\\frac{\\sqrt{g_m}}{C_L}$. Since transconductance $g_m \\propto W$ and $C_L \\propto W$, the noise voltage scales as $\\frac{\\sqrt{W}}{W} = \\frac{1}{\\sqrt{W}}$. Doubling $W$ reduces the noise voltage by a factor of $\\sqrt{2}$.\n    *   **Signal Level:** The signal swing is determined by $V_{DD}$, which remains constant.\n    *   **Result:** Since the signal level is constant and the noise level decreases (or the power/energy per cycle increases), the Signal-to-Noise Ratio (SNR) improves.\n\n**Conclusion:**\nDoubling the widths of the NMOS and PMOS devices will **decrease the phase noise** (i.e., improve the phase noise performance). Specifically, the phase noise typically improves by about 3 dB due to the increased power consumption and improved SNR, while the oscillation frequency remains roughly the same.",
        "format": "markdown",
        "sha256": "479d2ac2a966d92f8ec5fe8aec32f138b3556c08fab8fb48ee7676ee04410f20"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the widths reduces phase noise by about 3 dB. Its noise-voltage scaling is consistent with the increased node capacitance and yields a factor-of-two noise-power improvement.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2532,
        "output_tokens": 6636,
        "total_tokens": 9168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2532,
        "output_tokens": 6636,
        "total_tokens": 9168,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5995,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram and the principles of oscillator design, here is the analysis:\n\n1.  **Identify the Circuit:** The figure shows three inverters connected in a closed loop (the output of the last inverter feeds the input of the first). This is a **3-stage ring oscillator**.\n\n2.  **Effect of Doubling Transistor Widths ($W$):**\n    *   **Capacitance ($C$):** The load capacitance at each node is primarily determined by the gate capacitance of the subsequent transistors and the drain capacitance of the driving transistors. Since capacitance is proportional to width ($C \\propto W \\cdot L$), doubling the width **doubles the capacitance** ($C_{new} = 2C$).\n    *   **Current ($I$):** The drive current of a MOSFET is proportional to its width ($I_D \\propto W$). Therefore, doubling the width **doubles the current** ($I_{new} = 2I$).\n    *   **Transconductance ($g_m$):** The transconductance is proportional to width ($g_m \\propto W$). So, **$g_m$ doubles**.\n\n3.  **Effect on Frequency and Delay:**\n    *   The propagation delay of an inverter stage is approximately $t_d \\approx \\frac{C \\cdot V_{DD}}{I}$.\n    *   Since both $C$ and $I$ double, the delay $t_d$ remains roughly **constant**.\n    *   Consequently, the oscillation frequency $f_{osc} = \\frac{1}{2N t_d}$ (where $N=3$) remains **unchanged**.\n\n4.  **Effect on Power:**\n    *   The dynamic power consumption is $P = C \\cdot V_{DD}^2 \\cdot f_{osc}$.\n    *   Since $C$ doubles and $f_{osc}$ is constant, the power consumption **doubles**. This means the signal energy per cycle ($E = C \\cdot V_{DD}^2$) also doubles.\n\n5.  **Effect on Phase Noise:**\n    *   Phase noise is generally inversely proportional to the signal power (or energy) and directly proportional to the noise spectral density.\n    *   **Noise:** The thermal noise voltage spectral density at the output of a CMOS inverter stage is approximately $S_v \\approx \\frac{4kT\\gamma}{g_m}$. Since $g_m$ doubles, the noise spectral density **halves** (decreases by 3 dB).\n    *   **Signal:** The signal amplitude is clamped by the supply voltage $V_{DD}$, so the signal swing doesn't change. However, the energy stored in the oscillation mode (proportional to capacitance $C$) doubles.\n    *   **Result:** The signal-to-noise ratio (SNR) improves. Specifically, since the noise decreases (by factor of 2) and the signal energy increases (by factor of 2), the phase noise decreases significantly. A common approximation for ring oscillators is that phase noise $\\mathcal{L} \\propto \\frac{1}{W^2}$ (or at least $\\propto 1/W$).\n\n**Conclusion:**\nDoubling the widths of the NMOS and PMOS devices will cause the **phase noise to decrease** (improve). The circuit will consume more power but will have a lower noise floor, leading to better spectral purity. Typically, this can result in a reduction of phase noise by about 6 dB (a factor of 4), assuming the noise scales with $1/W^2$.",
        "format": "markdown",
        "sha256": "d00759b14bffd39163dca46f5fc1249fbd9dc56556bb90b618863e7bf5bc30f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly predicts lower phase noise and recognizes that width and capacitance increase, but it gives a 6 dB reduction instead of the correct 3 dB, effectively double-counting the improvement.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2532,
        "output_tokens": 6349,
        "total_tokens": 8881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2532,
        "output_tokens": 6349,
        "total_tokens": 8881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5560,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the ring oscillator, we can analyze the small-signal model of the circuit.\n\n1.  **Circuit Structure**: The circuit is a 3-stage ring oscillator consisting of three inverters connected in a loop. The supply node (top rail) is connected to the power supply ($V_{DD}$) of all three inverters. In a standard CMOS inverter, the top terminal is the source of the PMOS transistor, and the bottom terminal is the source of the NMOS transistor (connected to ground). Thus, the supply node is connected to the sources of the three PMOS transistors.\n\n2.  **Small-Signal Model of an Inverter**:\n    Consider a single inverter stage. Let the supply node voltage be $v_x$ (small-signal perturbation). The PMOS transistor has its source at $v_x$, gate at $v_{in}$, and drain at $v_{out}$.\n    The small-signal current flowing into the source of the PMOS transistor (which is the current drawn from the supply node for this stage) is approximately:\n    $$i_{s} \\approx g_m (v_s - v_g) = g_m (v_x - v_{in})$$\n    (Assuming $r_o$ is large and ignoring body effect for simplicity, or incorporating it into an effective $g_m$).\n\n3.  **Total Current**:\n    Since there are three identical inverters connected to the supply node, the total small-signal current $i_x$ flowing into the supply node is the sum of the currents from each stage:\n    $$i_x = \\sum_{k=1}^{3} i_{s,k} = \\sum_{k=1}^{3} g_m (v_x - v_{in,k}) = 3g_m v_x - g_m \\sum_{k=1}^{3} v_{in,k}$$\n\n4.  **Ring Oscillator Condition**:\n    In a 3-stage ring oscillator, the signals at the inputs of the three inverters ($v_{in,1}, v_{in,2}, v_{in,3}$) are phase-shifted versions of each other. Specifically, due to the symmetry and the 3-stage loop (each stage providing roughly 120 degrees of phase shift at the oscillation frequency), the sum of the small-signal input voltages is zero:\n    $$\\sum_{k=1}^{3} v_{in,k} = 0$$\n    This is because the three signals are $120^\\circ$ apart, and their vector sum is zero.\n\n5.  **Calculate Resistance**:\n    Substituting the sum of inputs into the current equation:\n    $$i_x = 3g_m v_x - g_m (0) = 3g_m v_x$$\n    The small-signal resistance $R_X$ is defined as the ratio of the voltage perturbation to the current perturbation:\n    $$R_X = \\frac{v_x}{i_x} = \\frac{v_x}{3g_m v_x} = \\frac{1}{3g_m}$$\n\n    Note: If we consider the output resistance $r_o$ and body effect $g_{mb}$, the resistance looking into the source of a MOSFET is approximately $\\frac{1}{g_m + g_{mb}}$. With three such transistors in parallel, the resistance would be $\\frac{1}{3(g_m + g_{mb})}$. However, in a simplified model, it is $\\frac{1}{3g_m}$.\n\n    Also, in some contexts involving negative resistance converters or specific oscillator analyses, the effective resistance can be negative, but looking into the supply node of a standard ring oscillator with high gain, the impedance is dominated by the source resistance of the PMOS transistors, which is positive. The oscillator effectively draws a current proportional to the supply voltage ripple, presenting a positive resistive load (loss) to the supply network.\n\n    **Answer:**\n    The small-signal resistance is **$R_X = \\frac{1}{3g_m}$** (where $g_m$ is the transconductance of the transistors in the inverters).\n\n    More precisely, considering the parallel combination of the three PMOS sources:\n    $$R_X = \\frac{1}{3} \\cdot \\frac{1}{g_m} = \\frac{1}{3g_m}$$",
        "format": "markdown",
        "sha256": "af3eabc05693ae65421c1cd292513fe29f6947e41ef2dd3070c1a2c72ee99dc7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer uses a static PMOS transconductance model and gives a gm-based resistance, missing the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution assigns this kind of static-only analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2529,
        "output_tokens": 18351,
        "total_tokens": 20880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2529,
        "output_tokens": 18351,
        "total_tokens": 20880,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the ring oscillator, we can perform a small-signal analysis of the circuit.\n\n**1. Circuit Model and Assumptions**\nThe circuit consists of three identical inverters connected in a ring. Let's model each inverter using a small-signal equivalent circuit. A common model for a CMOS inverter around its switching point (metastable state) includes:\n*   Transconductance $g_m$ (assuming symmetric NMOS and PMOS, so $g_{mn} = g_{mp} = g_m$).\n*   Output resistance $r_o$ (assuming $r_{on} = r_{op} = r_o$).\n*   The inverter takes an input voltage $v_{in}$ and produces an output voltage $v_{out}$, powered by supply voltage $v_{dd}$ and ground.\n\nThe small-signal current drawn from the supply node ($i_{dd}$) by a single inverter can be expressed as:\n$$i_{dd} = g_m(v_{dd} - v_{in}) + \\frac{v_{dd} - v_{out}}{r_o}$$\nThis comes from the PMOS transistor model where the source is at $v_{dd}$, gate at $v_{in}$, and drain at $v_{out}$. The current is $g_m v_{sg} + g_o v_{sd} = g_m(v_{dd} - v_{in}) + \\frac{1}{r_o}(v_{dd} - v_{out})$.\n\n**2. Analysis with Test Voltage**\nWe want to find the resistance looking into the supply node. Let's apply a small-signal test voltage $v_x$ at the supply node (so $v_{dd} = v_x$). The ground is at 0V.\nLet the output voltages of the three inverters (from left to right) be $v_1, v_2, v_3$.\nThe connections are:\n*   Inverter 1: Input $v_3$, Output $v_1$.\n*   Inverter 2: Input $v_1$, Output $v_2$.\n*   Inverter 3: Input $v_2$, Output $v_3$.\n\nDue to the symmetry of the circuit and the common supply perturbation $v_x$, the small-signal voltages at the outputs of all three inverters will be equal. Let $v_1 = v_2 = v_3 = v_o$.\n\n**3. Solving for Node Voltages**\nLet's write the KCL equation at the output node of the first inverter (node $v_1$). The current entering from the PMOS side must equal the current leaving through the NMOS side (since the input of the next stage is high impedance).\nCurrent from PMOS (supply side): $i_p = g_m(v_x - v_3) + \\frac{v_x - v_1}{r_o}$\nCurrent to NMOS (ground side): $i_n = g_m(v_3) + \\frac{v_1}{r_o}$  *(Note: NMOS current source is $g_m v_{in} = g_m v_3$ flowing from drain to source)*\n\nEquating $i_p = i_n$:\n$$g_m(v_x - v_o) + \\frac{v_x - v_o}{r_o} = g_m(v_o) + \\frac{v_o}{r_o}$$\n$$(g_m + \\frac{1}{r_o})(v_x - v_o) = (g_m + \\frac{1}{r_o})v_o$$\nDividing by $(g_m + 1/r_o)$ (which is non-zero):\n$$v_x - v_o = v_o \\implies 2v_o = v_x \\implies v_o = \\frac{v_x}{2}$$\nSo, the small-signal voltage at the input and output of each inverter is $v_x/2$.\n\n**4. Calculating Current and Resistance**\nNow, calculate the current drawn from the supply node by one inverter:\n$$i_{dd,1} = g_m(v_x - v_{in}) + \\frac{v_x - v_{out}}{r_o}$$\nSubstituting $v_{in} = v_3 = v_x/2$ and $v_{out} = v_1 = v_x/2$:\n$$i_{dd,1} = g_m\\left(v_x - \\frac{v_x}{2}\\right) + \\frac{v_x - v_x/2}{r_o} = g_m\\left(\\frac{v_x}{2}\\right) + \\frac{1}{r_o}\\left(\\frac{v_x}{2}\\right) = \\frac{v_x}{2} \\left( g_m + \\frac{1}{r_o} \\right)$$\n\nSince there are three identical inverters connected to the supply node, the total current $i_x$ drawn from the supply is:\n$$i_x = 3 \\times i_{dd,1} = \\frac{3 v_x}{2} \\left( g_m + \\frac{1}{r_o} \\right)$$\n\nThe small-signal resistance $R_X$ is the ratio of the test voltage to the total current:\n$$R_X = \\frac{v_x}{i_x} = \\frac{v_x}{\\frac{3 v_x}{2} (g_m + 1/r_o)} = \\frac{2}{3(g_m + 1/r_o)}$$\n\nAssuming the transconductance is much larger than the output conductance ($g_m \\gg 1/r_o$), which is typical for high-gain inverters:\n$$R_X \\approx \\frac{2}{3g_m}$$\n\n**Answer:**\nThe small-signal resistance seen looking into the supply node is **$R_X = \\frac{2}{3(g_m + g_o)}$**, which is approximately **$\\frac{2}{3g_m}$** (where $g_m$ is the transconductance of the transistors in the inverter). If $g_m$ is defined as the total transconductance of the inverter ($g_{mn}+g_{mp}$), the result would be $\\frac{4}{3g_{m,inverter}}$. Given standard notation in such problems, **$R_X \\approx \\frac{2}{3g_m}$** is the expected form.",
        "format": "markdown",
        "sha256": "e2e62b290944e26ea9c6cbded3494d20ef0cf4f753ecb7ce5ca5eb7c9b2d45b7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The static, symmetry-based analysis gives a gm-based resistance and ignores the oscillator’s dominant load-capacitance charging and discharging mechanism. The golden solution explicitly assigns this kind of internally consistent static derivation a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2529,
        "output_tokens": 15863,
        "total_tokens": 18392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2529,
        "output_tokens": 15863,
        "total_tokens": 18392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14446,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To determine the small-signal resistance $R_X$ seen looking into the supply node of the ring oscillator, we can analyze the circuit using small-signal models of the inverters.\n\n**1. Circuit Analysis:**\nThe circuit consists of three inverters connected in a ring (a 3-stage ring oscillator). The supply node (let's call its small-signal voltage $v_x$) is connected to the top terminal (source of the PMOS transistor) of all three inverters. The bottom terminal (source of the NMOS transistor) is connected to ground (AC ground).\n\n**2. Small-Signal Model of an Inverter:**\nLet's consider a single CMOS inverter with input $v_{in}$, output $v_{out}$, and supply voltage $v_{dd}$ (which is our node $v_x$).\nThe small-signal current drawn from the supply node by the inverter is primarily the current flowing through the PMOS transistor from the source to the drain.\nThe current $i_p$ from the supply node is given by:\n$$i_p \\approx g_{m,p} (v_x - v_{in}) + g_{ds,p} (v_x - v_{out})$$\nwhere $g_{m,p}$ is the transconductance of the PMOS and $g_{ds,p}$ is its output conductance.\n\nFor a high-gain inverter (gain $A \\gg 1$), the output voltage is strongly determined by the input: $v_{out} \\approx -A v_{in}$. In many simplified analyses of ring oscillators, especially regarding supply impedance, the feedthrough from the supply to the output is considered, or the inputs are assumed to be effectively at AC ground due to the high loop gain locking the operating point.\n\nLet's assume a simplified model where the inverter acts as a transconductance amplifier drawing current from the supply proportional to the difference between the supply voltage and the input voltage.\n$$i_{supply} \\approx g_m (v_x - v_{in})$$\nwhere $g_m$ is the effective transconductance.\n\n**3. Loop Analysis:**\nIn a 3-stage ring oscillator with high gain $A$, the loop gain is $(-A)^3 = -A^3$. For the small-signal perturbations around the oscillating state (or the unstable DC equilibrium), the voltages at the inputs of the inverters are coupled.\nIf we assume the ideal case where the loop gain is very high, the feedback forces the input voltages to be related to the supply voltage.\nUsing the model $v_{out} = \\frac{1+A}{2}v_x - A v_{in}$ (which accounts for supply feedthrough), we found that $v_{in} \\approx v_x / 2$.\nThen the current drawn by one inverter is:\n$$i_1 \\approx g_{m,p} (v_x - v_x/2) = g_{m,p} \\frac{v_x}{2}$$\n\nHowever, in many textbook contexts for this specific problem (finding supply impedance of a ring oscillator), a simpler approximation is used. If we assume the inputs are effectively at AC ground (or the variation $v_x - v_{in} \\approx v_x$), the current drawn by each inverter is $i \\approx g_m v_x$.\n\nLet's consider the parallel connection. The three inverters are connected in parallel to the supply node $v_x$.\nThe total current $i_{total}$ drawn from the supply node is the sum of currents drawn by each inverter.\n$$i_{total} = i_1 + i_2 + i_3$$\n\nIf we model each inverter as drawing a current $i \\approx g_m v_x$ (assuming $v_{in} \\approx 0$ for small signal perturbations at the supply, or using the high-gain approximation where input variations are negligible compared to supply variations in the current equation $g_m(v_x - v_{in})$):\n$$i_{total} \\approx 3 g_m v_x$$\n\n**4. Calculation of Resistance:**\nThe small-signal resistance $R_X$ is defined as $v_x / i_{total}$.\n$$R_X = \\frac{v_x}{i_{total}} = \\frac{v_x}{3 g_m v_x} = \\frac{1}{3 g_m}$$\n\nIf we use the more precise derivation where $v_{in} = v_x/2$, the current is $g_m v_x / 2$, leading to $R_X = \\frac{2}{3 g_m}$. However, the standard result often cited for the supply resistance of an N-stage ring oscillator is $\\frac{1}{N g_m}$. For $N=3$:\n\n$$R_X \\approx \\frac{1}{3g_m}$$\n\nwhere $g_m$ is the transconductance of the inverters (specifically the PMOS transconductance or the inverter's effective transconductance).\n\n**Answer:**\nThe small-signal resistance seen looking into the supply node is approximately **$\\frac{1}{3g_m}$** (or more precisely $\\frac{2}{3g_{m,p}}$ depending on the exact model of feedthrough). Given the standard context of such problems, the answer is likely:\n\n$$R_X = \\frac{1}{3g_m}$$",
        "format": "markdown",
        "sha256": "64668a62d96430dfdee519f05e0110de706f23cf2784bc046671d5649be6f3e5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a gm-based static resistance and misses the dominant oscillation-driven charging and discharging of the load capacitances, so it reaches the wrong result. Its discussion of the three inverters is relevant background but does not establish the required mechanism.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2529,
        "output_tokens": 21941,
        "total_tokens": 24470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2529,
        "output_tokens": 21941,
        "total_tokens": 24470,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20788,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer changes.\n\nHere is the detailed explanation:\n\n1.  **Origin of the Formula:** The formula $R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$ is derived for the **static DC operating point** of the circuit. Specifically, it assumes the circuit is at the **metastable equilibrium point** where all node voltages are at $V_{DD}/2$.\n    *   At this specific DC bias point, the input voltage and output voltage of each inverter are equal ($V_{in} = V_{out} = V_{DD}/2$).\n    *   When $V_{in} = V_{out}$, the gate and drain of the transistors are effectively at the same potential (in a small-signal sense relative to the supply), causing the NMOS and PMOS devices to behave like **diode-connected transistors** ($V_{GS} = V_{DS}$ for NMOS, $V_{SG} = V_{SD}$ for PMOS).\n    *   The small-signal resistance of a diode-connected MOS device is approximately $1/g_m$. Since there are three inverters in parallel connected to the supply node, the total resistance is the parallel combination of the three branches, each having a resistance of $(1/g_{mn} + 1/g_{mp})$.\n\n2.  **Condition During Oscillation:** If the circuit oscillates, it is operating in a **large-signal, dynamic regime**.\n    *   The voltages at the nodes are time-varying and switching between logic low (0) and logic high ($V_{DD}$).\n    *   Consequently, $V_{in} \\neq V_{out}$ for the inverters. The assumption that the devices behave as \"diode-connected\" is **invalid** during oscillation.\n    *   The transistors are not biased at a fixed linear point; they switch between cutoff, triode, and saturation regions.\n\n3.  **Effective Resistance:** During oscillation, the \"resistance\" seen from the supply is not a constant linear resistance defined by $g_m$. Instead, the supply must provide energy to charge and discharge the load capacitances at each node.\n    *   The average current drawn from the supply is determined by the switching activity: $I_{avg} \\approx N \\cdot C_L \\cdot V_{DD} \\cdot f_{osc}$ (where $N=3$).\n    *   The effective resistance is $R_{eff} = V_{DD} / I_{avg} \\approx \\frac{1}{3 C_L f_{osc}}$.\n    *   This effective resistance is dynamic and depends on the oscillation frequency and capacitance, which is fundamentally different from the static resistance $\\frac{1}{3}(1/g_{mn} + 1/g_{mp})$. Typically, the effective resistance during oscillation is much lower (meaning higher current consumption) than the static resistance calculated at the metastable point.\n\n**Conclusion:**\nThe formula is only valid for the static DC bias point (where the circuit is not oscillating). Once the circuit oscillates, the operating conditions change completely, the diode-connection assumption fails, and the effective resistance changes.",
        "format": "markdown",
        "sha256": "1fac45dc20a961c486559187786d61b0ab9ea806941d01394902dbbfc1d780d4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies capacitive switching as the source of average supply current and derives RX ≈ 1/(3CLfosc). However, it incorrectly concludes that this resistance is typically much lower than the static estimate; it should remain on the order of the MOS on-resistance, not change substantially.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2613,
        "output_tokens": 9551,
        "total_tokens": 12164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8842,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2613,
        "output_tokens": 9551,
        "total_tokens": 12164,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8842,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer **changes**.\n\nHere is the detailed explanation:\n\n1.  **Origin of the Formula:** The formula $R_X \\approx \\frac{1}{3} \\left( \\frac{1}{g_{mn}} + \\frac{1}{g_{mp}} \\right)$ is derived by analyzing the circuit at its **metastable equilibrium point** (the unstable DC operating point where all input voltages are approximately $V_{DD}/2$).\n    *   At this specific point, for each inverter, the input voltage $V_{in}$ is approximately equal to the output voltage $V_{out}$.\n    *   For the NMOS transistor: $V_G = V_{in}$ and $V_D = V_{out}$. Since $V_{in} \\approx V_{out}$, we have $V_{GS} \\approx V_{DS}$. This is the condition for a **diode-connected** NMOS, which has a small-signal resistance of $\\approx 1/g_{mn}$.\n    *   For the PMOS transistor: $V_G = V_{in}$, $V_S = V_{DD}$, $V_D = V_{out}$. Since $V_{in} \\approx V_{out}$, we have $V_{SG} = V_{DD} - V_{in} \\approx V_{DD} - V_{out} = V_{SD}$. This is the condition for a **diode-connected** PMOS, with resistance $\\approx 1/g_{mp}$.\n    *   Thus, each inverter looks like two resistors ($1/g_{mn}$ and $1/g_{mp}$) in series from the supply node to ground. Since there are 3 inverters in parallel connected to the supply node, the total resistance is divided by 3.\n\n2.  **Oscillating State:** When the circuit **oscillates**, it is no longer in a static equilibrium.\n    *   **Large Signal Switching:** The voltages at the nodes are switching between 0 and $V_{DD}$. The assumption that $V_{in} \\approx V_{out}$ is completely false; in fact, $V_{out} \\approx V_{DD} - V_{in}$ (inverted). Therefore, the transistors are **not** diode-connected.\n    *   **Non-constant $g_m$:** The transconductance $g_m$ is a small-signal parameter defined at a specific bias point. In a ring oscillator, the transistors switch between cutoff, triode, and saturation regions. The current drawn from the supply is a series of pulses, not a small-signal linear current.\n    *   **Effective Resistance:** The resistance seen by the supply during oscillation is effectively determined by the average power consumption required to charge and discharge the parasitic capacitances at the oscillation frequency $f$. The average current is $I_{avg} \\approx C_{load} V_{DD} f$, so the effective resistance is $R_{eff} = V_{DD} / I_{avg} \\approx 1 / (C_{load} f)$. This value depends on the frequency and capacitance, not just the small-signal transconductances $g_{mn}$ and $g_{mp}$.\n\nIn summary, the given formula is valid only for the small-signal analysis around the unstable bias point (the point where oscillation *starts* from noise). Once the circuit is oscillating, the operating point is a large-signal limit cycle, and the resistance value is fundamentally different.",
        "format": "markdown",
        "sha256": "5ca3f417df152d9b070635bc82155b02f3d297e1284e4d637c4cbe085507a787"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies capacitive charging and gives a 1/(C f)-type dynamic estimate, but omits the three-node factor unless Cload denotes total capacitance and, crucially, does not show that the result remains on the order of the MOS on-resistance. Calling it fundamentally different misses the key magnitude conclusion.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 2613,
        "output_tokens": 11995,
        "total_tokens": 14608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11230,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 2613,
        "output_tokens": 11995,
        "total_tokens": 14608,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11230,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes, the answer **changes** (or rather, the formula is no longer valid/applicable) if the circuit is oscillating.\n\nHere is the detailed reasoning:\n\n1.  **Small-Signal vs. Large-Signal Regime:**\n    The formula $R_X \\approx (1/3)(1/g_{mn} + 1/g_{mp})$ is derived from **small-signal analysis**. Small-signal parameters like transconductance ($g_m$) are defined at a specific DC operating point. For a ring oscillator, the relevant operating point for this linear analysis is the **metastable point** where all input and output voltages are at $V_{DD}/2$. At this point, the transistors are biased in saturation (or weak inversion), and the circuit is linearized.\n    However, **oscillation is a large-signal, non-linear phenomenon**. When the circuit oscillates, the voltages swing between 0 and $V_{DD}$. The transistors switch between cutoff, linear (triode), and saturation regions. The transconductance $g_m$ is not constant; it varies dynamically with the instantaneous voltage. Therefore, a constant resistance value derived from fixed $g_m$ values does not describe the circuit during oscillation.\n\n2.  **Invalidity of the \"Diode-Connected\" Model:**\n    The reasoning provided states that \"each inverter behaves as two diode-connected devices in series.\"\n    *   A CMOS inverter behaves like a resistor (specifically, two series resistors $1/g_{mn}$ and $1/g_{mp}$) **only** when it is diode-connected (output tied to input) and biased at $V_{DD}/2$. In this specific static case, $V_{out} = V_{in}$, so the NMOS and PMOS act like resistors.\n    *   In a ring oscillator, the inverters are **not** diode-connected. The output of one stage drives the input of the next with a phase shift. During oscillation, $V_{in} \\neq V_{out}$ for the inverters. The devices are acting as amplifiers and switches, not as simple resistors. Thus, the model \"two diode-connected devices in series\" is topologically and functionally incorrect during oscillation.\n\n3.  **Dynamic Impedance and Negative Resistance:**\n    For a ring oscillator to sustain oscillation, the loop gain must be greater than or equal to 1. In linear system terms, this often implies the presence of **negative resistance** in the loop to cancel out losses.\n    *   The calculated $R_X$ is a positive resistance (dissipative).\n    *   In an oscillating circuit, the effective impedance seen at the supply node is complex and time-varying. The supply current will have a large AC component at the oscillation frequency. The \"resistance\" would effectively be the ratio of the supply voltage to the average DC current drawn ($R_{eff} = V_{DD} / I_{DC}$), which is determined by the switching activity and is generally different from the small-signal resistance at the metastable point.\n\n**Summary:**\nThe formula is a valid approximation for the small-signal impedance looking into the supply node **only at the unstable metastable DC operating point** (before oscillation starts or if the loop is broken/linearized). Once the circuit oscillates, it enters a non-linear regime where the simple resistive model fails, and the effective impedance changes significantly.",
        "format": "markdown",
        "sha256": "5e351ae92d0bb69abcdb05dc830709d8b42810a2400f80d798f3b5fa0404a39b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the static small-signal model does not describe the oscillating ring, but misses the key capacitive charging mechanism and the conclusion that RX remains on the order of the MOS on-resistance. Its claim that the effective resistance changes significantly is unsupported, and the negative-resistance discussion does not answer the supply-resistance question.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 2613,
        "output_tokens": 8770,
        "total_tokens": 11383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1280,
        "input_tokens": 2613,
        "output_tokens": 8770,
        "total_tokens": 11383,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the explanation:\n\n1.  **Circuit Identification**: The circuit shown is a **switched-capacitor reset amplifier** (or a sample-and-hold amplifier with a regenerative latch). It consists of a differential input pair ($M_1, M_2$), cascode transistors ($M_3, M_4$), a cross-coupled latch/load ($M_3-M_6$), and clock-controlled switches ($S_1-S_4$). Transistor $M_7$ acts as a **tail switch** controlled by the clock signal $CK$.\n\n2.  **Operation of $M_7$**:\n    *   **Reset Phase ($CK = 1$)**: $M_7$ is turned ON. The common source node of the differential pair ($M_1, M_2$) is connected to ground. Switches $S_1, S_2$ connect nodes $P, Q$ to $V_{DD}$, resetting the input stage and outputs.\n    *   **Amplification/Hold Phase ($CK = 0$)**: $M_7$ is turned OFF. The tail node becomes floating (high impedance). The input voltages $V_{in1}, V_{in2}$ are applied to the gates of $M_1, M_2$. The circuit operates as a charge-redistribution amplifier or a transconductor driving the cross-coupled load.\n\n3.  **Effect of Increasing Width of $M_7$**:\n    *   **Parasitic Capacitance**: Increasing the width ($W$) of a MOS transistor increases its parasitic capacitances, specifically the gate-source capacitance ($C_{gs}$) and drain-bulk capacitance ($C_{db}$). For $M_7$, this increases the capacitance at the tail node (the common source node of $M_1$ and $M_2$). Let's call this $C_{tail}$.\n    *   **Gain Mechanism**: In this type of switched-capacitor or charge-redistribution circuit, the output voltage is generated by redistributing charge. The relationship is roughly $\\Delta V_{out} \\propto \\frac{\\Delta Q_{in}}{C_{total}}$. The total capacitance $C_{total}$ includes the output capacitance and the reflected capacitance from the input/tail nodes.\n    *   **Capacitive Division**: The tail node capacitance $C_{tail}$ (dominated by $M_7$'s parasitics when $W_7$ is large) acts as a load that absorbs some of the signal charge. Since $V = Q/C$, for a given input charge (determined by $V_{in}$ and input capacitances), an increase in the total effective capacitance (due to larger $C_{tail}$) results in a smaller voltage swing at the output.\n    *   **Result**: Therefore, increasing the width of $M_7$ increases the parasitic capacitance at the tail node, which lowers the overall gain of the stage.\n\n**Conclusion:**\nAs the width of $M_7$ increases, the parasitic capacitance at the tail node increases. This increased capacitance reduces the voltage swing for a given input signal (due to capacitive loading/charge division). Therefore, the **initial voltage gain decreases**.\n\n(Note: Increasing the width would also decrease the on-resistance $R_{on}$ of $M_7$, improving the reset speed, and increase charge injection/leakage, but the primary effect on the gain magnitude in this configuration is a decrease due to increased capacitance.)",
        "format": "markdown",
        "sha256": "cedeef13459dcc1ee8791656f449066b295786cdefbac9153d6b52b315c723ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion that initial gain decreases is correct, but the explanation misses the dominant mechanism: a wider M7 increases tail current, reducing the relevant gm/ICM gain factor. Instead, it mischaracterizes the amplification phase and attributes the trend to tail-node capacitive loading, so the reasoning is not physically consistent with the circuit.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 16642,
        "total_tokens": 19157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 16642,
        "total_tokens": 19157,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the step-by-step explanation:\n\n1.  **Identify the Circuit Topology:** The circuit shown is a **clocked comparator** (specifically, a preamplifier followed by a regenerative latch).\n    *   **Preamplifier Stage:** Formed by the differential pair $M_1$ and $M_2$ with the tail current source $M_7$. This stage amplifies the small differential input voltage ($V_{in1} - V_{in2}$) during the active phase.\n    *   **Latch Stage:** Formed by the cross-coupled pairs $M_3$-$M_4$ (NMOS) and $M_5$-$M_6$ (PMOS). This stage provides high gain to quickly switch the output to digital levels ($V_{DD}$ or ground) once the preamplifier output exceeds a threshold.\n    *   **Switches ($S_1$-$S_4$):** Used for resetting or precharging the nodes ($P, Q, X, Y$) to $V_{DD}$ during the reset phase (likely when $CK=0$ if switches are PMOS, or a specific clock phase).\n\n2.  **Role of $M_7$:** Transistor $M_7$ acts as the tail current source for the differential input pair $M_1$ and $M_2$. The width of $M_7$ ($W_7$) directly controls the bias current $I_{SS}$ flowing through the differential pair (assuming the clock voltage $V_{CK}$ is constant). The relationship is $I_{SS} \\propto W_7$.\n\n3.  **Initial Voltage Gain:** The \"initial voltage gain\" refers to the gain of the preamplifier stage before the latch takes over and regenerates the signal. The preamplifier converts the input differential voltage into a small differential voltage at nodes $P$ and $Q$ (and subsequently $X$ and $Y$).\n    *   The gain of this stage is approximately $A_{initial} \\approx g_{m1} \\cdot R_{out}$, where $g_{m1}$ is the transconductance of $M_1$ and $R_{out}$ is the output resistance at the drain of $M_1$ (node $P$).\n\n4.  **Effect of Increasing $W_7$:**\n    *   **Transconductance ($g_m$):** Increasing $W_7$ increases the tail current $I_{SS}$. Since $g_{m1} = \\sqrt{2 \\mu_n C_{ox} (W/L)_1 I_{D1}}$ and $I_{D1} \\approx I_{SS}/2$, the transconductance $g_{m1}$ increases proportional to $\\sqrt{W_7}$.\n    *   **Output Resistance ($r_o$):** Increasing the current $I_{SS}$ decreases the output resistance of the transistors. The output resistance $r_o = V_A / I_D$ is inversely proportional to the current. So, $r_{o1}, r_{o3}, r_{o5}$ all decrease proportional to $1/W_7$. The total load resistance $R_{out}$ at node $P$ (which is roughly $r_{o1} \\parallel (r_{o3} + r_{o5})$) decreases proportional to $1/W_7$.\n\n5.  **Conclusion:** The initial voltage gain is proportional to $g_{m1} \\cdot R_{out}$.\n    *   $A_{initial} \\propto \\sqrt{W_7} \\cdot \\left(\\frac{1}{W_7}\\right) = \\frac{1}{\\sqrt{W_7}}$.\n    *   Therefore, as the width of $M_7$ increases, the initial voltage gain **decreases**.\n\nThis is a standard trade-off in analog design: increasing the bias current (by increasing $M_7$'s width) makes the circuit faster (higher bandwidth) but reduces the gain.\n\n**Answer:** The initial voltage gain **decreases**.",
        "format": "markdown",
        "sha256": "31c57fb50ea6bebe14c28f0bc317dc611cb92c2ee1472b906edb28639e63a966"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion and current scaling are right: wider M7 raises tail current, while input-pair gm grows only as the square root. However, it explains the comparator’s transient integration gain using a static gm·Rout model and speculative output-resistance loading, rather than the relevant gm/ICM integration dependence.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 15125,
        "total_tokens": 17640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 15125,
        "total_tokens": 17640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis:\n\n1.  **Identify the role of $M_7$**: Transistor $M_7$ acts as the tail current source for the differential input pair $M_1$ and $M_2$. Its gate is connected to the clock signal $CK$. When $CK$ is high, $M_7$ turns on, biasing the differential pair.\n\n2.  **Effect of increasing width $W_7$**: The current through $M_7$ (the tail current $I_{SS}$) is determined by its width $W_7$ (assuming it's in saturation and $V_{CK}$ is constant). The relationship is approximately $I_{SS} \\propto \\frac{W_7}{L_7}$. Therefore, increasing the width $W_7$ increases the tail current $I_{SS}$.\n\n3.  **Effect on the differential pair ($M_1, M_2$)**: The tail current $I_{SS}$ is split between $M_1$ and $M_2$, so the bias current for each is $I_{D1} = I_{D2} = I_{SS}/2$. Increasing $I_{SS}$ increases the bias current $I_{D1}$.\n    The transconductance ($g_m$) of the input transistors $M_1$ and $M_2$ is given by $g_m = \\sqrt{2 \\mu_n C_{ox} (W/L) I_D}$. Since $I_D$ increases with $W_7$, the transconductance $g_{m1}$ (and $g_{m2}$) increases (specifically, proportional to $\\sqrt{W_7}$).\n\n4.  **Initial Voltage Gain**: The circuit functions as a clocked comparator, which typically consists of a preamplifier stage (the differential pair $M_1, M_2$) followed by a regenerative latch (the cross-coupled pairs $M_3-M_6$).\n    *   The **initial voltage gain** refers to the gain of the preamplifier stage before the positive feedback of the latch takes over (regeneration).\n    *   The gain of this differential amplifier stage is approximately $A_v \\approx g_{m1} \\cdot R_{out}$, where $R_{out}$ is the output impedance at the nodes (P, Q or X, Y).\n    *   Since $g_{m1}$ increases with the width of $M_7$, and the load impedance (determined by $M_3, M_4$ etc., which are not changed) remains roughly constant or is dominated by the transconductance of the load transistors, the overall transconductance of the stage increases.\n    *   Specifically, the preamplifier gain is roughly proportional to the ratio $g_{m1} / g_{m3}$. Since $g_{m1}$ increases, the gain increases.\n\n**Conclusion:**\nAs the width of $M_7$ increases, the tail current increases, which increases the transconductance ($g_m$) of the input differential pair ($M_1, M_2$). Consequently, the **initial voltage gain increases**.\n\n**Answer:** The initial voltage gain **increases**.",
        "format": "markdown",
        "sha256": "9916b6949e76a621a49e283e7e55264e8239c5fbcb23b08378cfb1606f4346cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies M7 as the tail device and recognizes that increasing its width raises tail current and input-pair transconductance, but concludes that gain increases. The essential trend is the opposite: initial gain decreases because the relevant gain factor falls as tail current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 9560,
        "total_tokens": 12075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 9560,
        "total_tokens": 12075,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the explanation:\n\n1.  **Circuit Identification**: The figure shows a **clocked regenerative comparator** (or latch). The input stage consists of a differential pair ($M_1$ and $M_2$) controlled by a tail current source ($M_7$) and the clock signal ($CK$). The output stage is a cross-coupled latch formed by transistors $M_3, M_4, M_5,$ and $M_6$. Nodes $P$ and $Q$ are the output nodes of the differential pair and the input nodes to the latch.\n\n2.  **Operation Principle**:\n    *   During the precharge phase (typically when $CK$ is low), switches (like $S_1, S_2$ or $S_3, S_4$ depending on the specific logic) precharge nodes $P$ and $Q$ to a certain voltage (usually $V_{DD}$).\n    *   During the evaluation phase (when $CK$ goes high), the differential pair $M_1$ and $M_2$ turns on. A differential input voltage ($V_{in1} - V_{in2}$) creates a differential current ($\\Delta I$) flowing through the pair.\n    *   This current charges or discharges the capacitance present at nodes $P$ and $Q$. Let's denote the total capacitance at these nodes as $C_{PQ}$ (which includes parasitic capacitance and any added capacitance).\n\n3.  **Effect of Capacitance**:\n    *   The voltage change at nodes $P$ and $Q$ is given by the relationship $\\Delta V = \\frac{1}{C} \\int i \\, dt$.\n    *   Initially, the rate of change of the voltage difference is $\\frac{d(\\Delta V)}{dt} \\approx \\frac{g_m \\cdot \\Delta V_{in}}{C_{PQ}}$, where $g_m$ is the transconductance of the input differential pair.\n    *   The \"initial voltage gain\" in this dynamic context can be thought of as the ratio of the output voltage difference developed at nodes $P/Q$ (or $X/Y$) to the input voltage difference over a short time interval $t$. This is approximately $A_{initial} \\approx \\frac{g_m \\cdot t}{C_{PQ}}$.\n\n4.  **Conclusion**:\n    *   Since the initial voltage gain is inversely proportional to the capacitance at nodes $P$ and $Q$ ($A \\propto 1/C$), increasing the capacitance will **decrease** the initial voltage gain.\n    *   Physically, a larger capacitance means more charge is required to change the voltage at nodes $P$ and $Q$. For a fixed input current (determined by $V_{in}$), the voltage will build up more slowly. This reduces the effective gain of the preamplifier stage before the latch takes over, and it also increases the propagation delay of the comparator.\n\n**Answer:** The initial voltage gain **decreases**.",
        "format": "markdown",
        "sha256": "330ced38071b6522faf5deb4f13513412787a6fdb4674a32ccf760021aa4bb26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result: the initial gain remains approximately unchanged because the longer amplification interval cancels the slower voltage buildup. The answer correctly notes that added capacitance slows the transient, but mistakes a fixed-time slope for the gain accumulated by regeneration.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 8673,
        "total_tokens": 11188,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 8673,
        "total_tokens": 11188,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8000,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The circuit shown is a **clocked comparator** (specifically, a variant of a regenerative latch comparator, often found in textbooks like Razavi's \"Design of Analog CMOS Integrated Circuits\").\n\nHere is the step-by-step analysis to determine the effect of increasing capacitance at nodes P and Q:\n\n1.  **Circuit Operation:**\n    *   The input stage consists of the differential pair $M_1$ and $M_2$. When the clock $CK$ is active (turning on the tail current source $M_7$), a differential input voltage $V_{in1} - V_{in2}$ creates a differential current $\\Delta I = g_m (V_{in1} - V_{in2})$.\n    *   This current difference flows into and out of nodes **P** and **Q**.\n    *   Nodes P and Q act as the output nodes of this initial differential amplification stage. The load at these nodes consists of the cross-coupled transistors $M_3$ and $M_4$ (which form the first stage of the latch) and the parasitic/additional capacitance at these nodes.\n\n2.  **Initial Voltage Gain:**\n    *   In the initial phase (before the latch fully regenerates), the circuit behaves like a differential amplifier with a capacitive load.\n    *   The voltage difference developed at nodes P and Q is given by the integration of the current over time: $\\Delta V_{PQ} = \\frac{1}{C_{total}} \\int \\Delta I \\, dt$.\n    *   For a short time $t$, $\\Delta V_{PQ} \\approx \\frac{g_m (V_{in1} - V_{in2})}{C_P + C_Q} t$.\n    *   The effective \"initial voltage gain\" (or transimpedance gain in the time domain) can be expressed as the ratio of the output voltage difference to the input voltage difference: $A_{initial} \\approx \\frac{\\Delta V_{PQ}}{V_{in1} - V_{in2}} \\propto \\frac{g_m t}{C_{total}}$.\n\n3.  **Effect of Increasing Capacitance:**\n    *   If we increase the capacitance at nodes P and Q ($C_P$ and $C_Q$), the total capacitance $C_{total}$ increases.\n    *   Looking at the expression $A_{initial} \\propto \\frac{1}{C_{total}}$, an increase in capacitance leads to a **decrease** in the gain.\n    *   Physically, a larger capacitance means the differential current has to charge/discharge a larger capacitor. This results in a slower rate of voltage change ($\\frac{dV}{dt} = \\frac{I}{C}$). Consequently, for a given evaluation time, the output voltage difference will be smaller.\n    *   In the frequency domain, the output impedance at nodes P and Q is $Z_{out} = R_{out} \\parallel \\frac{1}{sC}$. Increasing $C$ reduces the magnitude of the impedance $|Z_{out}|$ (especially at higher frequencies or during fast transients). Since the gain is $A_v = g_m Z_{out}$, a lower impedance results in a lower gain.\n\n**Conclusion:**\nIncreasing the capacitance at nodes P and Q **decreases** the initial voltage gain. This is because the larger capacitance lowers the output impedance of the input stage (acting as a heavier load), reducing the voltage swing developed for a given input current. This also increases the propagation delay of the comparator.\n\n**Answer:** The initial voltage gain **decreases**.",
        "format": "markdown",
        "sha256": "03ea5c6555f9a0124bae1f29114336e865734f39615c26488cffae437bdfdbe2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the correct result. The answer notes that larger capacitance slows the voltage change, but treats gain at a fixed time as initial gain and misses that the longer amplification phase cancels the capacitance dependence.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 13874,
        "total_tokens": 16389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 13874,
        "total_tokens": 16389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13081,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the explanation:\n\n1.  **Circuit Identification**: The figure shows a **clocked regenerative comparator** (or clocked comparator). It consists of an input differential pair ($M_1, M_2$) with a switched tail current source ($M_7$), followed by a regenerative latch formed by cross-coupled transistors ($M_3, M_4$ for NMOS and $M_5, M_6$ for PMOS).\n\n2.  **Initial Operation Phase**: When the clock signal $CK$ goes high, the tail current transistor $M_7$ turns on. The differential pair $M_1$ and $M_2$ begins to amplify the input voltage difference ($V_{in1} - V_{in2}$). This stage acts as a transconductance amplifier, converting the input voltage difference into a current difference ($\\Delta I \\approx g_m \\cdot \\Delta V_{in}$).\n\n3.  **Role of Nodes P and Q**: Nodes P and Q are the output nodes of this initial differential amplifier stage. The current difference generated by $M_1$ and $M_2$ flows into the capacitance present at these nodes (which includes parasitic capacitance and the gate capacitances of the latch transistors $M_3, M_4, M_5, M_6$).\n\n4.  **Gain Relationship**: Since the load at nodes P and Q is primarily capacitive (there are no resistive loads connected to $V_{DD}$ or ground directly at these nodes during the initial phase), the voltage change at these nodes is an integration of the current:\n    $$ \\Delta V \\approx \\frac{\\Delta I \\cdot t}{C_{load}} = \\frac{g_m \\cdot \\Delta V_{in} \\cdot t}{C_{P,Q}} $$\n    The initial voltage gain ($A_{initial}$) can be characterized as the ratio of the output voltage difference to the input voltage difference. In the time domain, this is proportional to $\\frac{g_m \\cdot t}{C_{P,Q}}$. In the frequency domain (s-domain), the gain is $A(s) = \\frac{g_m}{s(C_P + C_Q)}$.\n\n5.  **Effect of Increasing Capacitance**: If you increase the capacitance at nodes P and Q ($C_P$ and $C_Q$), the total load capacitance ($C_{load}$) increases.\n    *   From the equation $\\Delta V \\propto \\frac{1}{C}$, a larger capacitance means that for the same input current and time, the resulting voltage change ($\\Delta V$) will be smaller.\n    *   Mathematically, since gain is inversely proportional to capacitance ($A \\propto 1/C$), increasing the capacitance reduces the gain.\n\n**Conclusion:**\nIncreasing the capacitance at nodes P and Q increases the load capacitance of the input differential stage. This reduces the rate at which the voltage changes at these nodes, thereby **decreasing the initial voltage gain**. (Consequently, it would also increase the propagation delay of the comparator, as it would take longer for the voltage difference to reach the threshold required to trigger the latch).",
        "format": "markdown",
        "sha256": "1f114d50620a9f79e19a7863ddb6656d56642dcf3156b0a3efcd910ab4198979"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly notes that larger capacitance slows the node-voltage change and increases delay, but it incorrectly concludes that the initial gain decreases. The longer amplification interval compensates for the slower slope, leaving the initial gain approximately unchanged.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 7625,
        "total_tokens": 10140,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2515,
        "output_tokens": 7625,
        "total_tokens": 10140,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6928,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the explanation:\n\n1.  **Circuit Identification**: The circuit shown is a **dynamic latch** or a **clocked comparator** (often used in ADCs like flash or pipeline ADCs). It consists of an input differential pair ($M_1, M_2$), a tail current switch ($M_7$), precharge switches ($S_1-S_4$), and a regenerative cross-coupled latch formed by $M_3, M_4$ (NMOS) and $M_5, M_6$ (PMOS).\n\n2.  **Role of M5 and M6**: Transistors $M_5$ and $M_6$ are PMOS transistors that form part of the cross-coupled latch. Specifically, they act as the active loads (pull-up devices) for the latch nodes $X$ and $Y$. Their gates are cross-coupled to the drains of the opposite transistors (Gate of $M_5$ is at $Y$, Gate of $M_6$ is at $X$). This cross-coupling provides the positive feedback necessary for the latch to regenerate a small input difference into a full digital output.\n\n3.  **Effect of Increasing Width**:\n    *   **Increased Drive Current**: Increasing the width ($W$) of $M_5$ and $M_6$ increases their transconductance ($g_m$) and drive current capability. In the regenerative phase (when the clock is high and the latch is active), these transistors provide the current to charge the output nodes ($X$ and $Y$) to $V_{DD}$. A larger width means they can supply more current, allowing the output nodes to charge faster.\n    *   **Stronger Positive Feedback**: The speed of a latch is determined by the regeneration speed, which is proportional to the loop gain or the effective transconductance of the cross-coupled pair ($g_{m3} + g_{m5}$ for one side). Increasing the size of $M_5$ and $M_6$ increases this effective transconductance, strengthening the positive feedback loop. This leads to a faster resolution time (the time it takes for the latch to settle to a final state).\n\n4.  **Trade-offs (for completeness)**: While the speed of the latch itself improves, increasing the width also increases the gate and drain capacitances at nodes $X$ and $Y$ (since the gates of $M_3/M_4$ and $M_5/M_6$ are connected to these nodes). This increases the capacitive load. However, in the context of latch design, the increase in driving current (and thus regeneration speed) typically dominates, or is the primary design lever used to improve speed. The main trade-offs are increased power consumption and increased input capacitance (which could potentially slow down the preceding stage if not designed carefully, but for the latch block itself, speed improves).\n\n**Conclusion:**\nIncreasing the widths of $M_5$ and $M_6$ increases the drive current and the strength of the positive feedback in the latch. Therefore, the **speed improves** (the resolution time decreases).\n\n**Answer:** The speed **improves**.",
        "format": "markdown",
        "sha256": "85fc24ca855153fc25d8d0f991f5d14982bcc7548ccb9e459dd44fa4c53f5889"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M5/M6 as cross-coupled PMOS devices and explains that stronger regeneration initially improves speed. It notes added capacitance but does not say that this eventually limits the benefit or yields an optimum width, and instead gives an unqualified improvement conclusion.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2514,
        "output_tokens": 15697,
        "total_tokens": 18211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2514,
        "output_tokens": 15697,
        "total_tokens": 18211,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15003,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, here is the step-by-step reasoning:\n\n1.  **Identify the Circuit Function:** The circuit shown is a **dynamic differential latch** or a **regenerative comparator** (commonly used in Flash ADCs). It consists of an input differential pair ($M_1, M_2$) with a tail current source ($M_7$), followed by a cross-coupled NMOS pair ($M_3, M_4$) and a cross-coupled PMOS pair ($M_5, M_6$). The switches $S_1-S_4$ control the precharge and evaluation phases.\n\n2.  **Role of M5 and M6:** Transistors $M_5$ and $M_6$ form a **cross-coupled PMOS pair**. This pair acts as the regenerative stage (latch) of the circuit.\n    *   During the evaluation phase, the differential input causes a small voltage difference at nodes $P$ and $Q$, which is amplified by the cross-coupled NMOS pair ($M_3, M_4$) to create a larger voltage difference at nodes $X$ and $Y$.\n    *   Once a small difference appears at $X$ and $Y$, the cross-coupled PMOS pair ($M_5, M_6$) takes over. It provides positive feedback: if one node (say $Y$) goes high, the gate of the other PMOS ($M_5$, connected to $Y$) goes high, turning it off, while the gate of $M_6$ (connected to $X$, which is low) goes low, turning $M_6$ on harder to pull $Y$ up to $V_{DD}$. This rapid regeneration latches the output to a full logic swing ($V_{out}$).\n\n3.  **Effect of Increasing Width ($W$):**\n    *   The speed of a regenerative latch is determined by the time it takes for the positive feedback loop to resolve the output. The resolution time $\\tau$ is approximately proportional to $C / G_m$, where $C$ is the total capacitance at the output nodes ($X, Y$) and $G_m$ is the effective transconductance of the regenerative pair.\n    *   Increasing the width of $M_5$ and $M_6$ increases their transconductance ($g_m \\propto W$). This strengthens the positive feedback loop, allowing it to charge/discharge the output nodes faster.\n    *   While increasing the width also increases the parasitic capacitance (drain capacitance) at nodes $X$ and $Y$, the increase in driving capability (current) typically dominates. The time constant $\\tau \\approx \\frac{C_{load} + c \\cdot W}{k \\cdot W} = \\frac{C_{load}}{k \\cdot W} + \\frac{c}{k}$. As $W$ increases, the first term decreases, leading to a smaller time constant.\n    *   Therefore, the regeneration happens faster, reducing the propagation delay.\n\n**Conclusion:**\nIncreasing the widths of $M_5$ and $M_6$ increases the strength of the regenerative feedback, which speeds up the latching process. Thus, the speed **improves**.\n\n**Answer:** improve",
        "format": "markdown",
        "sha256": "82cd6200a9d65a8ca7c747e2d5fae81385dfc728067b8d5ca79c011d8ef57a1a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M5/M6 as cross-coupled PMOS regenerative devices and explains why stronger regeneration initially improves speed. However, it concludes speed improves without noting that added parasitic capacitance eventually causes diminishing returns or an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2514,
        "output_tokens": 11515,
        "total_tokens": 14029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2514,
        "output_tokens": 11515,
        "total_tokens": 14029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10800,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, the circuit shown is a **clocked differential latch** (or a regenerative latch/comparator stage).\n\n1.  **Circuit Operation**: The input differential pair $M_1$ and $M_2$ (switched by $M_7$) converts the input voltage difference ($V_{in1} - V_{in2}$) into a differential current, creating a small voltage difference at nodes $P$ and $Q$. This small differential signal is then fed into the regenerative latch formed by the cross-coupled pairs $M_3$-$M_4$ (NMOS) and $M_5$-$M_6$ (PMOS). The cross-coupled pairs provide positive feedback to amplify this small difference and resolve it into a full-swing digital output at $V_{out}$ (nodes $X$ and $Y$).\n\n2.  **Role of M5 and M6**: Transistors $M_5$ and $M_6$ are the cross-coupled PMOS transistors. They act as active loads and, more importantly, as the positive feedback elements for the latch. They help to quickly charge or discharge the output nodes $X$ and $Y$ to the supply rails ($V_{DD}$ or ground), thereby resolving the output state.\n\n3.  **Effect of Increasing Width**:\n    *   **Increased Transconductance ($g_m$)**: Increasing the width ($W$) of $M_5$ and $M_6$ increases their transconductance ($g_m \\propto W$). This strengthens the positive feedback loop. A stronger positive feedback loop leads to a faster regeneration process. The time constant for the latch resolution is roughly $\\tau \\approx \\frac{C}{g_m - g_{m,load}}$. Increasing $g_m$ (from $M_5, M_6$) increases the denominator, reducing the time constant.\n    *   **Increased Drive Current**: Larger transistors can supply more current to charge/discharge the parasitic capacitances at nodes $X$ and $Y$. This allows the output voltage to swing to the final logic levels faster.\n    *   **Capacitance Trade-off**: Increasing the width also increases the gate capacitance (parasitic capacitance) at the nodes (since the gates are cross-coupled to the opposite nodes). While this increases the load capacitance $C$, the increase in drive strength ($g_m$) typically dominates or the net effect in a regenerative latch is a reduction in resolution time, especially if the latch was previously slow to resolve. In textbook contexts for such circuits, strengthening the feedback transistors is the primary method to improve speed.\n\nTherefore, increasing the widths of $M_5$ and $M_6$ strengthens the positive feedback and the drive capability of the latch, which reduces the resolution time.\n\n**Answer:** The speed **improves**.",
        "format": "markdown",
        "sha256": "02a1c4571cb7c9447885bd64ca4c27c1e04df8a026b0a7b5d0d5522f5d93467a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M5/M6 as cross-coupled PMOS devices and explains that stronger regeneration initially improves speed. It acknowledges added capacitance but does not state that it eventually limits the benefit or that there is an optimum width.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2514,
        "output_tokens": 8301,
        "total_tokens": 10815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2514,
        "output_tokens": 8301,
        "total_tokens": 10815,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7678,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, here is the explanation:\n\n1.  **Identify the Clocked Transistors:** In this Clocked CMOS circuit (which appears to be a master-slave flip-flop or a similar sequential logic element), the transistors whose gates are connected to the clock signals ($CK$ and $\\overline{CK}$) are the **clocked transistors**.\n    *   In the left block (Master), these are the middle PMOS (gate $\\overline{CK}$) and the middle NMOS (gate $CK$).\n    *   In the right block (Slave), these are the upper-right PMOS (gate $CK$) and the middle-right NMOS (gate $\\overline{CK}$).\n    *   The other transistors (top PMOS and bottom NMOS labeled $M_1$ in each block) are the **data transistors**, controlled by the input signals ($Z$ or $X$).\n\n2.  **Effect of Increasing Width:**\n    *   **Resistance:** Increasing the width ($W$) of a transistor decreases its on-resistance ($R_{on} \\propto 1/W$). Since the clocked transistors are in series with the data transistors, reducing their resistance would theoretically reduce the total resistance of the pull-up/pull-down paths, which could speed up the charging/discharging of the output nodes ($X$ and $Y$).\n    *   **Capacitance (The dominant factor):** However, increasing the width has two significant negative effects on speed:\n        1.  **Clock Loading:** The gates of the clocked transistors are connected to the clock network ($CK$ and $\\overline{CK}$). The gate capacitance is proportional to the width ($C_g \\propto W$). Increasing the width of these transistors significantly increases the capacitive load on the clock lines. This forces the clock buffers to drive more capacitance, which slows down the rise and fall times of the clock signal (clock edges become slower). Since the circuit's operation is synchronized to the clock, slower clock edges directly **degrade the speed** of the entire circuit.\n        2.  **Output/Internal Node Capacitance:** The drain and source terminals of the clocked transistors are connected to the output nodes ($X, Y$) and internal nodes. Increasing their width increases the junction (diffusion) capacitance at these nodes. This increases the total load capacitance that the logic stages have to drive. While the drive current increases, the capacitance increase often dominates, leading to a net increase in delay ($\\tau \\approx R \\cdot C$), or at least diminishing returns.\n\n**Conclusion:**\nWhile reducing resistance might seem helpful, the increase in **clock loading** (slowing down the clock signal) and **parasitic capacitance** at the output nodes typically dominates. Therefore, increasing the widths of the clocked transistors generally **degrades** the speed of the circuit.\n\n**Answer:** The speed **degrades**.",
        "format": "markdown",
        "sha256": "4d670f2a0fccd5ec54768f897da46d43597ad292baa58e0ba220c1222813354f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that widening the clocked devices lowers their on-resistance and adds capacitance, but concludes that speed degrades. The key result is that speed improves initially as resistance falls, with added node capacitance limiting or eventually reversing the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1695,
        "output_tokens": 14510,
        "total_tokens": 16205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13859,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1695,
        "output_tokens": 14510,
        "total_tokens": 16205,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13859,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit diagram:\n\n1.  **Circuit Identification**: The circuit shown is a ring oscillator composed of two **Clocked CMOS Inverters** (also known as C-inverters) and a standard inverter (`Inv3`).\n    *   The left block is a clocked inverter controlled by $CK$. When $CK=1$, it acts as an inverter ($X = \\overline{Z}$). When $CK=0$, it holds its state.\n    *   The right block is a clocked inverter controlled by $CK$ (active when $CK=0$). When $CK=0$, it acts as an inverter ($Y = \\overline{X}$). When $CK=1$, it holds its state.\n    *   The output $Z$ is fed back to the input of the first stage.\n\n2.  **Role of Clocked Transistors**: In a clocked CMOS circuit (like the blocks shown), the transistors controlled by the clock signal ($CK$ and $\\overline{CK}$) are placed in **series** with the logic transistors (controlled by data signals like $X, Y, Z$).\n    *   For example, in the left block's pull-down network, the NMOS with gate $CK$ is in series with the NMOS $M_1$ (gate $Z$).\n    *   This series connection adds extra resistance to the current path, which increases the propagation delay and slows down the circuit. This is a known disadvantage of clocked CMOS logic.\n\n3.  **Effect of Increasing Width**:\n    *   The resistance of a transistor is inversely proportional to its width ($R \\propto 1/W$).\n    *   By **increasing the widths of the clocked transistors**, their on-resistance ($R_{on}$) decreases.\n    *   This reduces the total series resistance of the pull-up and pull-down networks in both clocked blocks.\n    *   Lower resistance allows the output nodes ($X$ and $Y$) to charge and discharge more quickly (faster $RC$ time constant).\n    *   Consequently, the propagation delay through each stage decreases.\n\n4.  **Conclusion**: Since the propagation delay is reduced, the oscillation frequency increases, meaning the **speed improves**.\n\n*(Note: While increasing the width does increase the capacitive load on the clock network and internal node capacitances, the primary effect in this context—overcoming the series resistance bottleneck—is an improvement in speed, assuming the clock driver is sufficiently strong.)*\n\n**Answer:** The speed **improves**.",
        "format": "markdown",
        "sha256": "5cc04cbc01bd83fe91eee02525cc43d022817433ea085d0db78fc40955362342"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies that widening the clocked transistors lowers series on-resistance and improves speed initially. It mentions added capacitance but does not explain that latch-node capacitance eventually limits or reverses the benefit, and presents the improvement as unqualified.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1695,
        "output_tokens": 13825,
        "total_tokens": 15520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1695,
        "output_tokens": 13825,
        "total_tokens": 15520,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13260,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, here is the explanation:\n\n**Answer: The speed degrades.**\n\n**Reasoning:**\n\n1.  **Identification of Clocked Transistors:** In the circuit, the transistors with gates connected to the clock signals ($CK$ and $\\overline{CK}$) are the \"clocked transistors\". In the left block, these are the PMOS with gate $\\overline{CK}$ and the NMOS with gate $CK$. In the right block, these are the PMOS with gate $CK$ and the NMOS with gate $\\overline{CK}$. The transistors labeled $M_1$ and the top transistors in the stacks are controlled by the data signal (feedback $Z$ or input $X$).\n\n2.  **Increased Clock Loading (Gate Capacitance):** Increasing the width ($W$) of a transistor increases its gate capacitance ($C_g \\propto W$). The gates of the clocked transistors are connected to the clock network ($CK$ and $\\overline{CK}$). Increasing their width significantly increases the capacitive load on the clock buffers. This causes the clock signal edges (rise and fall times) to become slower. Since the circuit is a clocked logic structure (specifically a ring oscillator using clocked inverters), the speed of the circuit is heavily dependent on the sharpness and speed of the clock edges. Slower clock edges mean the transistors switch more slowly, which degrades the overall speed of the circuit.\n\n3.  **Increased Parasitic Capacitance at Output Nodes:** In this circuit topology (Clocked CMOS), the clocked transistors are often connected directly to the output nodes of the logic blocks (e.g., the drain of the clocked NMOS and PMOS in the left block are connected to node $X$). Increasing the width of these transistors increases their source/drain diffusion capacitance. This adds to the load capacitance ($C_{load}$) at nodes $X$ and $Y$. The propagation delay is proportional to $R \\cdot C_{load}$. Even though increasing the width reduces the on-resistance ($R_{on} \\propto 1/W$), the increase in capacitance ($C_{load}$) typically dominates or creates a trade-off where the parasitic delay ($R_{on} C_{diff}$) becomes significant, leading to a net degradation in speed or at least no improvement if the clock loading is the limiting factor.\n\n4.  **Internal Node Capacitance:** Increasing the width of transistors in a series stack (like the pull-up or pull-down networks) increases the parasitic capacitance at the internal nodes between the transistors. This internal capacitance must be charged or discharged during switching, adding to the delay.\n\n**Conclusion:**\nWhile increasing the width reduces the resistance of the clocked transistors (which would theoretically improve drive strength), the resulting **increase in clock loading** (slowing down the clock signal) and **increase in parasitic capacitance** at the output and internal nodes outweigh this benefit. Therefore, the overall speed of the circuit **degrades**.",
        "format": "markdown",
        "sha256": "5f48e4484433b4038c4384805d2410f534ddc619cc206478f8a3b66537dc9c4c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer concludes that speed degrades, contrary to the required initial speed improvement as lower on-resistance outweighs added capacitance at first. The added-capacitance discussion is relevant, but it misses the initial trend; the golden solution assigns this conclusion 2.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1695,
        "output_tokens": 15554,
        "total_tokens": 17249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1695,
        "output_tokens": 15554,
        "total_tokens": 17249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, the structure is a **clocked inverter-based quadrature clock generator** (or a phase shifter/ring oscillator configured for quadrature output).\n\nHere's the analysis:\n1.  **Circuit Topology**: The circuit consists of two main blocks (left and right) which are **clocked inverters** (or dynamic latch stages), followed by a static inverter ($Inv_3$).\n2.  **Clocking**: The left block is controlled by $CK$ (for the NMOS path) and $\\overline{CK}$ (for the PMOS path). The right block has the opposite control: $CK$ for the top PMOS path and $\\overline{CK}$ for the bottom NMOS path. This complementary clocking is a key feature of quadrature generators.\n3.  **Operation**:\n    *   The left block samples the feedback signal $Z$ and updates node $X$ during one phase of the clock (e.g., when $CK=1$).\n    *   The right block samples node $X$ and updates node $Y$ during the opposite phase of the clock (e.g., when $CK=0$, since $\\overline{CK}=1$).\n    *   The inverter $Inv_3$ produces $Z$ from $Y$ ($Z = \\text{NOT}(Y)$).\n4.  **Quadrature Output**: This arrangement creates a phase shift between the signals at nodes $X$ and $Y$ (or $X$ and $Z$). Specifically, because the two clocked stages are triggered by opposite phases of the clock ($CK$ and $\\overline{CK}$), the output signals at intermediate nodes (like $X$ and $Y$, or $X$ and $Z$) are phase-shifted by approximately 90 degrees relative to each other. This is the definition of quadrature signals.\n\nTherefore, **yes**, the structure in the figure provides quadrature outputs (typically at nodes $X$ and $Y$, or $X$ and $Z$).",
        "format": "markdown",
        "sha256": "3e9a934dd12d09bf1bcee7c63c13927b666eaacba2a0f941fce90abe1e14f225"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the nominal quadrature relationship from the two oppositely clocked latch stages, but does not explain the departures from exact quadrature: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1679,
        "output_tokens": 7889,
        "total_tokens": 9568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7445,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1679,
        "output_tokens": 7889,
        "total_tokens": 9568,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7445,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit diagram:\n\n1.  **Circuit Topology**: The circuit consists of two clocked inverter stages connected in a feedback loop with a static inverter ($Inv_3$).\n    *   **Left Stage**: A clocked inverter with input $Z$ (feedback from output) and output $X$. It uses transistors controlled by $CK$ and $\\overline{CK}$. Specifically, the pull-up path is active when $\\overline{CK}=1$ (i.e., $CK=0$) and $Z=0$, pulling $X$ high. The pull-down path is active when $CK=1$ and $Z=1$, pulling $X$ low. This stage effectively acts as a clocked inverter updating $X$ based on $Z$.\n    *   **Right Stage**: Another clocked inverter with input $X$ and output $Y$. Its pull-up and pull-down paths are controlled by $CK$ and $\\overline{CK}$ (swapped relative to the left stage). The right stage is primarily active when $CK=0$ (both PMOS and NMOS in the control path are ON), inverting $X$ to produce $Y$ ($Y = \\overline{X}$). When $CK=1$, the right stage is in a hold state.\n    *   **Feedback**: The output $Y$ is inverted by $Inv_3$ to produce $Z$, which feeds back to the input of the left stage.\n\n2.  **Function**: This structure is a **clocked ring oscillator**. Specifically, it is a topology often used for **quadrature clock generation**.\n    *   In such a 2-stage clocked ring oscillator (with complementary clocks $CK$ and $\\overline{CK}$), the internal nodes $X$ and $Y$ oscillate.\n    *   Due to the cross-clocked nature (one stage updates on one phase, the other on the complementary phase, or they are staggered), the signals at nodes $X$ and $Y$ (or $X$ and $Z$) are phase-shifted.\n    *   In a standard 3-stage ring oscillator (Left + Right + $Inv_3$), the phase shift between stages is roughly 120 degrees. However, with the specific clocking scheme (two-phase clocking), this circuit is designed to produce outputs that are **90 degrees out of phase** (quadrature).\n    *   The nodes $X$ and $Y$ (or $X$ and $Z$, since $Z$ is just the inverse of $Y$) serve as the quadrature outputs. For instance, $X$ and $Y$ would be 90 degrees apart, and $Y$ and $Z$ are 180 degrees apart. $X$ and $Z$ would be 90 degrees apart.\n\n3.  **Conclusion**: Yes, this structure is a known topology for generating quadrature signals (specifically, it generates two clock phases that are 90 degrees out of phase, often denoted as $\\phi_1$ and $\\phi_2$ or $CK$ and $Q$). The outputs are typically taken from nodes like $X$ and $Y$ (or $X$ and $Z$).\n\n**Answer:** Yes, the structure in the figure provides quadrature outputs (typically at nodes $X$ and $Y$, or $X$ and $Z$). This is a clocked ring oscillator topology used for quadrature clock generation.",
        "format": "markdown",
        "sha256": "9815433193779a092fe539653c8b909be5c8d4cfe89e3d9f71e8d0476ec08470"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies X and Y (or X and Z) as nominal quadrature outputs and notes the opposite clock phases, but mischaracterizes the divide-by-two as a ring oscillator and gives misleading 3-stage phase-shift reasoning. It also omits both reasons quadrature is not exact: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1679,
        "output_tokens": 15001,
        "total_tokens": 16680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1679,
        "output_tokens": 15001,
        "total_tokens": 16680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, the structure shown is a **clocked ring oscillator** or, more specifically, a topology commonly used as a **quadrature clock generator**.\n\nHere's a breakdown of why:\n1.  **Clocked Inverters:** The circuit consists of two main blocks (left and right) that resemble clocked inverters. The left block is controlled by $CK$ and $\\overline{CK}$, and the right block has the clocks swapped ($CK$ and $\\overline{CK}$). This alternating clock control is characteristic of circuits designed to generate phase-shifted signals.\n2.  **Feedback Loop:** The output $Z$ is fed back to the input of the first stage (left block), creating a loop: $Z \\rightarrow \\text{Left Block} \\rightarrow X \\rightarrow \\text{Right Block} \\rightarrow Y \\rightarrow \\text{Inv}_3 \\rightarrow Z$.\n3.  **Phase Generation:** In such a configuration, the nodes $X$, $Y$, and $Z$ produce signals that are phase-shifted versions of the input clock $CK$.\n    *   $CK$ and $\\overline{CK}$ are the primary clock signals (180° apart).\n    *   The left block generates $X$, which is a delayed version of the clock.\n    *   The right block generates $Y$, which is further delayed.\n    *   If the delays through the stages are tuned appropriately (typically to be $T/4$ where $T$ is the clock period), the outputs $X$, $Y$, and $Z$ (along with $CK$ and $\\overline{CK}$) form a set of four clock phases that are 90° apart (quadrature).\n\nThis specific topology (two clocked inverters in a loop with a static inverter) is a standard design for generating **quadrature clocks** (four non-overlapping or overlapping clock phases 90 degrees apart) in CMOS circuits.\n\n**Answer:** Yes, the structure in the figure provides quadrature outputs (specifically, the nodes $X$, $Y$, and $Z$ along with the input clocks can form a quadrature clock set).",
        "format": "markdown",
        "sha256": "67e665a42cc947970939b38826e8d552dbffa9d5539367d966144ca9c703eed3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The yes conclusion is nominally correct, and the answer notices the alternating clocked stages and feedback. But it misidentifies the circuit as a delay-based ring oscillator: it is a C2MOS divide-by-two, with quadrature arising because the latches switch half an input period apart, not from delays tuned to T/4. It also misses the departures from exact quadrature due to Inv3 delay and unequal loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1679,
        "output_tokens": 6959,
        "total_tokens": 8638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1679,
        "output_tokens": 6959,
        "total_tokens": 8638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, which is a **Clocked CMOS (C2MOS)** logic structure (specifically a C2MOS inverter with feedback), here is the explanation:\n\n**Answer: The speed degrades.**\n\n**Reasoning:**\n\n1.  **Increased Clock Load (Capacitance):** The \"clocked transistors\" are the ones controlled by the clock signals $CK$ and $\\overline{CK}$ (the top PMOS and bottom NMOS in each stack). The gates of these transistors are connected directly to the clock network. Increasing the width ($W$) of a transistor increases its gate capacitance ($C_{gate} \\propto W$). This adds a larger capacitive load to the clock drivers. A heavier load causes the clock signal to have slower rise and fall times (slower edges). Slow clock edges mean the transistors spend more time in the linear region during switching, which significantly increases the propagation delay and degrades the overall speed of the circuit.\n\n2.  **Increased Parasitic Capacitance:** Increasing the width of the clocked transistors also increases their source and drain diffusion capacitances (parasitic capacitance). These capacitances are located at the internal nodes of the circuit (e.g., the node between the top clocked PMOS and the logic transistors below it). The logic transistors now have to charge and discharge this larger capacitance, which adds to the delay of the logic path.\n\n3.  **Trade-off:** While increasing the width does decrease the on-resistance ($R_{on} \\propto 1/W$) of the clocked transistors (which would theoretically allow current to flow faster), in modern VLSI design and clocked circuits like this, the **capacitive effects** (load on the clock network and internal nodes) typically dominate. Therefore, making the clocked transistors wider generally slows down the circuit. In practice, clocked transistors are often sized to be relatively small to minimize this capacitive loading.",
        "format": "markdown",
        "sha256": "5bda980365cd0130a50e26e9850ca24f45f2e8b15a8599b45d9eaf4bbb9f1d47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite of the central result: widening the clocked devices improves speed by lowering series resistance, while their added capacitance does not substantially load the data path. The golden solution assigns 1 to a conclusion that speed degrades.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 7576,
        "total_tokens": 9280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 7576,
        "total_tokens": 9280,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7142,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, which appears to be a clocked CMOS logic circuit (specifically, a pair of clocked inverters forming a feedback loop, likely a ring oscillator or a latch), increasing the widths of the clocked transistors will generally cause the speed to **degrade**.\n\nHere is the detailed reasoning:\n\n1.  **Increased Clock Loading (Dominant Factor):**\n    *   The \"clocked transistors\" are the top PMOS and bottom NMOS transistors in each column, whose gates are connected directly to the clock signals ($CK$ or $\\overline{CK}$).\n    *   The gate capacitance of a transistor is proportional to its width ($C_{gate} \\propto W \\cdot L$).\n    *   Increasing the width of these transistors increases the capacitive load on the clock network (the buffers generating $CK$ and $\\overline{CK}$).\n    *   A heavier load on the clock network leads to slower rise and fall times for the clock signal and increased clock skew/delay. Since the circuit's operation is synchronized to the clock, a slower or delayed clock signal directly degrades the overall speed of the circuit.\n\n2.  **Increased Parasitic Capacitance:**\n    *   Increasing the width of the clocked transistors also increases their source and drain diffusion capacitances ($C_{diff} \\propto W$).\n    *   These transistors are connected to internal nodes (between the clocked transistors and the logic transistors). For example, the drain of the bottom clocked NMOS is connected to the source of the logic NMOS.\n    *   This internal node now has a larger capacitance. During the evaluation phase, the logic transistors (which are sized for logic function, not necessarily for driving large capacitive loads) must charge or discharge this additional parasitic capacitance. This increases the propagation delay ($t_{pd} \\approx R_{logic} \\cdot C_{parasitic}$), slowing down the logic transition.\n\n3.  **Trade-off (Resistance vs. Capacitance):**\n    *   While increasing the width does decrease the on-resistance ($R_{on} \\propto 1/W$) of the clocked transistors—which would theoretically speed up the charging/discharging of the output node—this benefit is usually outweighed by the negative effects mentioned above.\n    *   In standard VLSI design practice, clocked transistors (switches) are typically sized to be small (often minimum size or slightly larger) to minimize clock load and parasitic capacitance. Making them too large is a common design error that degrades performance.\n\n**Conclusion:**\nThe speed **degrades** because the increased capacitive load on the clock signal slows down the clock edges, and the increased parasitic capacitance at internal nodes slows down the logic transitions.",
        "format": "markdown",
        "sha256": "b63004ea703261932bdb931ee55586cf243c96b0c743e371a5467e003c5888ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that speed degrades, contrary to the central result: wider clocked devices reduce series resistance and add little loading to the data path. It mentions that resistance benefit but incorrectly says it is outweighed, and misses the acceptable charge-sharing limitation.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 13541,
        "total_tokens": 15245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 13541,
        "total_tokens": 15245,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12927,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the analysis of the circuit, here is the answer:\n\n**The speed improves.**\n\n**Reasoning:**\n\n1.  **Circuit Identification:** The circuit shown is a ring oscillator built using **Clocked CMOS (C2MOS)** logic gates (specifically, C2MOS inverters or similar logic blocks). The transistors with their gates connected directly to the clock signals ($CK$ or $\\overline{CK}$) and connected to the power rails ($V_{DD}$ or Ground) are the **clocked transistors**. The transistors in the middle are the logic transistors.\n\n2.  **Role of Clocked Transistors:** In C2MOS logic, the clocked transistors act as switches that connect the logic network to the power supply ($V_{DD}$) or ground (GND) during the active clock phase. They are placed in **series** with the logic transistors. For example, in the pull-down path, the current flows from the output node, through the logic NMOS, then through the clocked NMOS (controlled by $CK$) to ground.\n\n3.  **Effect of Increasing Width:**\n    *   The resistance ($R$) of a transistor is inversely proportional to its width ($W$). So, $R \\propto 1/W$.\n    *   By increasing the widths of the clocked transistors, their on-resistance ($R_{clocked}$) **decreases**.\n    *   The total resistance of the signal path is the sum of the logic transistor resistance and the clocked transistor resistance ($R_{total} = R_{logic} + R_{clocked}$).\n    *   Since $R_{clocked}$ decreases, the total resistance $R_{total}$ of the charging/discharging path decreases.\n\n4.  **Impact on Speed:**\n    *   The delay ($t_{delay}$) of a logic gate is approximately proportional to the RC time constant of the path: $t_{delay} \\approx R_{total} \\times C_{load}$.\n    *   A lower total resistance ($R_{total}$) leads to a **smaller delay**.\n    *   A smaller delay means the circuit switches faster. In a ring oscillator, this results in a higher oscillation frequency.\n\nTherefore, increasing the widths of the clocked transistors reduces the resistance in the signal path, which **improves the speed** of the circuit.\n\n*(Note: While increasing width does increase the capacitive load on the clock network and internal nodes, which can be a limiting factor, the primary effect of reducing series resistance is an improvement in speed.)*",
        "format": "markdown",
        "sha256": "48317bda23b2ed7eb8aedcec65d0f2cf0095f9dff8a18b68d0ceca097894c959"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that speed improves because wider clocked transistors have lower on-resistance. It does not identify charge sharing as the swing-degrading limitation that is acceptable only up to a point.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 9231,
        "total_tokens": 10935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1704,
        "output_tokens": 9231,
        "total_tokens": 10935,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an analysis of the arrangement, its components, and its logical function.\n\n### 1. Component Identification\nThe circuit is composed of the following digital logic elements:\n*   **Switches (Transmission Gates):** There are two switches controlled by complementary clock signals.\n    *   The first switch is controlled by **$CK$**. It closes when $CK = 1$ (High) and opens when $CK = 0$ (Low).\n    *   The second switch is controlled by **$\\overline{CK}$** (CK bar), which is the inverse of the first signal. It closes when $CK = 0$ and opens when $CK = 1$. This ensures that the two switches are never closed at the same time (non-overlapping clocks).\n*   **Inverters (NOT Gates):** There are three inverters (triangles with a small circle at the output).\n    *   **$Inv_1$**: The first inverter.\n    *   **Middle Inverter**: The second inverter in the chain.\n    *   **Right Inverter**: The third inverter.\n    *   *Note:* The middle and right inverters are connected in series. Two inverters in series act as a **buffer** (a non-inverting driver), because $\\text{NOT}(\\text{NOT}(X)) = X$.\n*   **Feedback Loop:** The output of the last inverter is connected via a wire at the bottom back to the input of the first switch. This creates a closed-loop system.\n\n### 2. Circuit Topology: Master-Slave Configuration\nThis arrangement is a classic **Master-Slave Flip-Flop** (or Latch) structure, specifically configured with feedback. It can be broken down into two stages:\n\n*   **Master Stage (Left Side):** Consists of the switch $CK$ and inverter $Inv_1$. This stage is active when $CK = 1$.\n*   **Slave Stage (Right Side):** Consists of the switch $\\overline{CK}$ and the two subsequent inverters (acting as a buffer). This stage is active when $CK = 0$ (i.e., when $\\overline{CK} = 1$).\n\n### 3. Step-by-Step Operation Analysis\nLet $Q$ be the output signal at the far right (which is also fed back to the input). Let's trace the signal through one clock cycle.\n\n**Phase 1: $CK = 1$ (High)**\n*   The switch labeled $CK$ is **closed**.\n*   The switch labeled $\\overline{CK}$ is **open**.\n*   The feedback signal $Q$ passes through the closed switch $CK$ into inverter $Inv_1$.\n*   The output of $Inv_1$ becomes $\\overline{Q}$ (the inverse of the current output).\n*   This value ($\\overline{Q}$) is stored at the node between $Inv_1$ and the second switch. Let's call this internal node $X$. So, **$X = \\overline{Q}$**.\n*   Since the second switch ($\\overline{CK}$) is open, the right side of the circuit is disconnected from $X$. The output $Q$ holds its previous value (it is in a \"hold\" state).\n\n**Phase 2: $CK = 0$ (Low)**\n*   The switch labeled $CK$ is **open**.\n*   The switch labeled $\\overline{CK}$ is **closed**.\n*   The left side is disconnected. The internal node $X$ holds its value from the previous phase ($X = \\overline{Q}_{\\text{old}}$).\n*   The signal $X$ passes through the closed switch $\\overline{CK}$.\n*   It then goes through the two inverters (the buffer). Since a buffer does not change the logic level ($X \\rightarrow \\overline{X} \\rightarrow X$), the signal remains $X$.\n*   This signal becomes the new output. So, **$Q_{\\text{new}} = X = \\overline{Q}_{\\text{old}}$**.\n\n### 4. Conclusion and Function\nThe circuit takes the output $Q$, inverts it to $\\overline{Q}$ during the high clock phase, and then passes that inverted value to the output during the low clock phase.\n\n*   **Logic Function:** $Q_{\\text{next}} = \\overline{Q_{\\text{current}}}$.\n*   **Behavior:** The output toggles between 0 and 1 with every complete clock cycle.\n    *   If $Q$ starts at 0, it becomes 1.\n    *   If $Q$ starts at 1, it becomes 0.\n\n**Summary:**\nThis arrangement is a **Toggle Flip-Flop** (or T-Flip-Flop with input tied to toggle) or a **Divide-by-2 Frequency Divider**.\n*   It acts as a memory element that stores the inverted state.\n*   The output frequency is exactly half of the input clock frequency ($f_{out} = f_{CK} / 2$).\n\nIn digital integrated circuit design, this specific block (a clocked inverter or transmission gate inverter) is often used as a building block for **Ring Oscillators** (if cascaded an odd number of times) or as a **clocked delay element**. With the feedback shown here, it creates a stable oscillating output at half the clock rate.",
        "format": "markdown",
        "sha256": "65ddc5c136f956c9a01748901eb3dcfd0c06d6cb0734223a2cde8d51689d03dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the clocked master-slave arrangement as a divide-by-two and explains that feedback toggles the output once per clock cycle, giving half the input frequency. Its switch-and-hold description captures the dynamic-latch operation; detailed internal path claims are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 9860,
        "total_tokens": 10944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 9860,
        "total_tokens": 10944,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an analysis of the arrangement:\n\n**1. Component Identification**\nThe circuit consists of the following digital logic components:\n*   **Inverters (NOT gates):** There are three inverters (triangles with a small circle at the output). The first one is labeled **$Inv_1$**. The other two are in series after the second switch. Let's refer to them as $Inv_2$ and $Inv_3$.\n*   **Switches:** There are two switches in the signal path.\n    *   The first switch is labeled **$CK$**. It closes when the clock signal $CK$ is high (logic 1).\n    *   The second switch is labeled **$\\overline{CK}$** (CK bar). It closes when the clock signal $CK$ is low (logic 0), as it is controlled by the complement of $CK$.\n\n**2. Circuit Topology**\nThe circuit is arranged as a **feedback loop**:\n*   The output of the last inverter (the rightmost node) is connected via a wire back to the input of the first switch (the leftmost node).\n*   The components are connected in series in the following order: **Switch($CK$) $\\rightarrow$ $Inv_1$ $\\rightarrow$ Switch($\\overline{CK}$) $\\rightarrow$ $Inv_2$ $\\rightarrow$ $Inv_3$ $\\rightarrow$ Output**.\n\n**3. Operational Analysis**\nThis arrangement resembles a **Ring Oscillator** circuit, which typically consists of an odd number of inverters connected in a feedback loop to create oscillation. However, the switches modify this behavior significantly.\n\n*   **Condition for Oscillation:** For a ring oscillator to work, the feedback loop must be closed, meaning the signal must be able to travel from the output back to the input continuously. In this diagram, this requires **both** switches to be closed simultaneously.\n*   **Switch Behavior:**\n    *   When **$CK = 1$**: The first switch ($CK$) is **closed**, but the second switch ($\\overline{CK}$) is **open**. The signal from the output passes through the first switch and inverter $Inv_1$ (inverting the signal), but is blocked by the open second switch. The rest of the circuit ($Inv_2, Inv_3$) is disconnected from the input.\n    *   When **$CK = 0$**: The first switch ($CK$) is **open**, and the second switch ($\\overline{CK}$) is **closed**. The feedback signal is blocked at the very beginning. The input to $Inv_1$ is disconnected. Although the second switch is closed, it passes a floating/undefined signal from $Inv_1$ to the subsequent inverters.\n\n**4. Conclusion**\n*   **No Oscillation:** Since $CK$ and $\\overline{CK}$ are complementary signals (they are never high at the same time), the two switches are **never closed simultaneously**. Therefore, the feedback loop is **always broken** (open).\n*   **Function:** Because the loop is never complete, the circuit **cannot oscillate**. Instead, it acts as a circuit that **holds its state** (a memory element or latch). The output will retain its previous value because the feedback path required to change the state is permanently interrupted by the clock control scheme.\n*   **Context:** This diagram is likely used in electronics education to illustrate:\n    *   The structure of a **Ring Oscillator** (the base circuit without switches).\n    *   The concept of **Clock Gating** or **Clock Control**, specifically showing how complementary switches can be used to stop or disable oscillation in a ring circuit. By breaking the loop with clock-controlled switches, the oscillation is halted.",
        "format": "markdown",
        "sha256": "afd7d1713a2a30ab9128e6bf745f9e0f7d84465c3f13794a67cce11897ed1a5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the circuit as a disabled ring oscillator and claims it cannot oscillate. It misses the essential function: a dynamic-latch divide-by-two circuit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 8097,
        "total_tokens": 9181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 8097,
        "total_tokens": 9181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7281,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the provided circuit diagram, here is an analysis of the arrangement:\n\n**1. Component Identification**\nThe circuit consists of the following digital logic components:\n*   **Inverters (NOT gates):** There are three inverters in the chain, represented by the triangle symbols with a small circle at the output. The first one is labeled **$Inv_1$**, and the other two are unlabeled. Let's refer to them as $Inv_1$, $Inv_2$, and $Inv_3$ from left to right.\n*   **Switches:** There are two switches in the signal path.\n    *   The first switch is labeled **$CK$**, indicating it is controlled by a clock signal. When $CK = 1$ (High), this switch is closed.\n    *   The second switch is labeled **$\\overline{CK}$** (CK with a bar over it), indicating it is controlled by the inverted clock signal. When $CK = 0$ (Low), $\\overline{CK} = 1$, and this switch is closed.\n\n**2. Circuit Topology**\n*   **Series Chain:** The components are arranged in a series line: Switch($CK$) $\\rightarrow$ Inverter($Inv_1$) $\\rightarrow$ Switch($\\overline{CK}$) $\\rightarrow$ Inverter($Inv_2$) $\\rightarrow$ Inverter($Inv_3$).\n*   **Feedback Loop:** The output of the last inverter ($Inv_3$) is connected via a wire at the bottom back to the input of the first switch. This creates a closed loop structure.\n\n**3. Functional Analysis**\nThis arrangement is a variation of a **Ring Oscillator** or a **Clocked Memory Element**. Here is a detailed breakdown of how it works:\n\n*   **Potential for Oscillation:** A loop containing an odd number of inverters (here, there are 3: $Inv_1, Inv_2, Inv_3$) is the basic structure of a **Ring Oscillator**. If the loop were continuous (all switches closed), the signal would invert and feed back, causing the circuit to oscillate continuously between logic 0 and logic 1.\n\n*   **Clock Control (Gating):** The switches are controlled by complementary clock signals ($CK$ and $\\overline{CK}$). This is the crucial feature:\n    *   **When $CK = 1$:** Switch $CK$ is **closed**, but Switch $\\overline{CK}$ is **open**.\n    *   **When $CK = 0$:** Switch $CK$ is **open**, but Switch $\\overline{CK}$ is **closed**.\n    *   Because the signals are complementary, **one switch is always open**. This means the feedback loop is **always broken** (open circuit) at one point.\n\n*   **Behavior:**\n    *   **Prevention of Oscillation:** Since the loop is always broken by one of the open switches, the circuit **cannot oscillate**. This is a common technique to stop a ring oscillator or to create a stable memory element from an unstable loop.\n    *   **State Holding (Memory):**\n        *   **When $CK = 1$:** The left part of the circuit (Switch $CK$ and $Inv_1$) is active. The input (feedback from output $Q$) passes through to $Inv_1$, producing $\\text{NOT}(Q)$. However, the path is blocked at the open Switch $\\overline{CK}$. The right part of the circuit ($Inv_2$ and $Inv_3$) is isolated from the input. In a physical circuit (like CMOS), the output node would hold its previous charge/state due to parasitic capacitance. Thus, the circuit **holds** the stored data.\n        *   **When $CK = 0$:** The left part is disconnected (Switch $CK$ is open). The right part is connected (Switch $\\overline{CK}$ is closed), but it is connected to the floating output of $Inv_1$. The circuit state is effectively isolated or in a high-impedance hold state.\n\n**Conclusion**\nThe arrangement depicts a **Clocked Memory Element** or a **Gated Ring**. By using complementary switches ($CK$ and $\\overline{CK}$), the designer has taken a potential ring oscillator (3 inverters in a loop) and broken the loop continuously. This prevents oscillation and allows the circuit to function as a **latch** or a **dynamic memory cell** that stores a state, controlled by the clock signal. It demonstrates how clock signals can be used to control information flow and stability in digital logic circuits.",
        "format": "markdown",
        "sha256": "958b85f6566f0063116bc3ca076de1e6b523a38067c500a06ab3dda3969dba6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes clock-controlled storage as a possibility, but misidentifies the circuit as a gated ring and concludes it cannot oscillate. It misses the essential function: dynamic latches divide the clock frequency by two.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 12805,
        "total_tokens": 13889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11806,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1084,
        "output_tokens": 12805,
        "total_tokens": 13889,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11806,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of how the red inverter ($Inv_1$) affects the performance.\n\n### Circuit Analysis\nThe circuit appears to be a **clocked ring oscillator** or a **clock generation/buffer circuit** with feedback. Let's break down the connections:\n*   **Input Node (Left):** Let's call the signal at the start $CK$.\n*   **Output Node (Middle):** The node labeled $\\overline{CK}$ (CK bar).\n*   **Red Path:** The red inverter connects the input $CK$ directly to the output $\\overline{CK}$.\n*   **Black Path (Top):** A switch controlled by $CK$ connects the input to a black inverter, which then connects to the output $\\overline{CK}$.\n*   **Feedback Loop (Bottom/Right):** The output $\\overline{CK}$ connects through a switch controlled by $\\overline{CK}$ (which is closed when $CK$ is low) to a chain of two black inverters, which feeds back to the input.\n\n### Effects of the Red Inverter on Performance\n\nThe red inverter affects the circuit's performance in two main ways, depending on the state of the clock signal ($CK$):\n\n**1. Increasing Speed and Drive Strength (When $CK$ is High)**\n*   **Parallel Driving:** When $CK$ is high (logic 1), the first switch (labeled $CK$) closes. At this point, both the **red inverter** and the **first black inverter** (via the closed switch) are active. Both are trying to invert the high input signal to produce a low output at the $\\overline{CK}$ node.\n*   **Performance Impact:** Having two inverters driving the same output node in parallel effectively increases the **drive strength** (current capability) of the circuit. This is equivalent to increasing the width of the output transistors.\n    *   **Faster Transition:** The increased current allows the output node capacitance to discharge more quickly. This reduces the **RC delay** and results in a faster, steeper signal edge (reduced rise/fall time).\n    *   **Higher Frequency:** Because the signal transitions faster, the circuit can operate at a higher maximum frequency.\n\n**2. Enabling Oscillation and Feedback (When $CK$ is Low)**\n*   **Completing the Loop:** When $CK$ is low (logic 0), the first switch ($CK$) opens, disconnecting the black inverter path. However, the second switch ($\\overline{CK}$) closes, connecting the feedback loop.\n*   **Oscillation Condition:** For a ring oscillator to work, the feedback loop must contain an **odd number of inverters** (to provide a total phase shift of 180 degrees, making it unstable/oscillatory).\n    *   The loop consists of: **Red Inverter** $\\rightarrow$ Switch $\\overline{CK}$ $\\rightarrow$ Black Inverter 2 $\\rightarrow$ Black Inverter 3 $\\rightarrow$ Feedback to input.\n    *   This loop has **3 inverters** (odd number).\n*   **Performance Impact:** Without the red inverter, the feedback loop would only have 2 inverters (Black 2 and Black 3), which is an even number. An even number of inverters in a loop creates a stable latch (memory), not an oscillator. The red inverter ensures the loop has the correct phase shift to **sustain oscillation** or maintain the dynamic state of the circuit when the main clock switch is open. It acts as a critical feed-forward path that ensures $\\overline{CK}$ is always the logical inverse of $CK$.\n\n### Summary\nThe red inverter improves performance by:\n1.  **Speeding up the signal transition:** It acts as a parallel driver when $CK$ is high, increasing current drive and reducing propagation delay for the $\\overline{CK}$ signal.\n2.  **Ensuring correct circuit operation:** It is essential for the feedback loop to function as an oscillator (or dynamic element) when $CK$ is low, by providing the necessary inversion (odd number of stages) in the feedback path.\n3.  **Reducing Clock Skew:** It provides a direct, low-latency path from $CK$ to $\\overline{CK}$, ensuring the inverted clock is generated quickly and reliably.",
        "format": "markdown",
        "sha256": "4bb6afd4218d2ebdc4bd82b5593f39777e6976bd3286ead1db63df1bd94e4a91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes a feedforward speed benefit and the three-inverter loop, but miscasts the path as parallel drive and the loop as beneficial. It misses the key low-frequency conflict, which raises the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 937,
        "output_tokens": 11614,
        "total_tokens": 12551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10673,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 937,
        "output_tokens": 11614,
        "total_tokens": 12551,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10673,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of how the red inverter ($Inv_1$) affects the circuit's performance.\n\n**Circuit Overview:**\nThe circuit consists of a feedback loop containing inverters and switches controlled by a clock signal ($CK$) and its inverse ($\\overline{CK}$).\n*   **Switch 1:** Controlled by $CK$. Closed when $CK=1$, open when $CK=0$.\n*   **Switch 2:** Controlled by $\\overline{CK}$. Closed when $CK=0$, open when $CK=1$.\n*   **Black Path:** Input $\\rightarrow$ Switch ($CK$) $\\rightarrow$ Inverter $\\rightarrow$ Intermediate Node.\n*   **Red Path ($Inv_1$):** Input $\\rightarrow$ Inverter ($Inv_1$) $\\rightarrow$ Intermediate Node.\n*   **Second Stage:** Intermediate Node $\\rightarrow$ Switch ($\\overline{CK}$) $\\rightarrow$ Two Inverters $\\rightarrow$ Feedback to Input.\n\nThe red inverter $Inv_1$ is connected in parallel with the series combination of the first switch ($CK$) and the first black inverter. Here is how it affects performance:\n\n**1. Ensures Circuit Functionality (Prevents Floating Nodes)**\n*   **When $CK = 0$ (Low):** The first switch ($CK$) is **open**, disconnecting the main black inverter path. However, the second switch ($\\overline{CK}$) is **closed**.\n*   Without the red inverter $Inv_1$, the connection from the input to the intermediate node would be broken. The intermediate node would be floating (undefined voltage), and the second stage would have an invalid input. The circuit would fail to toggle or oscillate.\n*   **With $Inv_1$:** The red inverter is always connected. It provides a valid inverted signal ($\\overline{Input}$) to the intermediate node. This allows the signal to propagate through the second stage (which is active when $CK=0$), causing the circuit to toggle/oscillate. Thus, $Inv_1$ is **essential for the circuit to operate** during the $CK=0$ phase.\n\n**2. Improves Speed and Drive Strength (Reduces Delay)**\n*   **When $CK = 1$ (High):** The first switch ($CK$) is **closed**, and the second switch ($\\overline{CK}$) is **open**.\n*   In this state, both the red inverter ($Inv_1$) and the black inverter path (Switch + Inverter) are active and driving the intermediate node.\n*   Having two inverters driving the same node in parallel effectively increases the **drive strength** (current capability) and lowers the output impedance. This allows the intermediate node to charge or discharge faster (reducing the RC time constant).\n*   **Result:** This **reduces the propagation delay** and improves the switching speed (rise/fall times) at the intermediate node, making the circuit faster and more robust against noise during the hold state.\n\n**3. Increases Power Consumption and Loading (Trade-offs)**\n*   **Power:** Since $Inv_1$ is always connected to the input, it is always active. If the input signal toggles, $Inv_1$ will switch, consuming dynamic power. This **increases the overall power consumption** of the circuit compared to a design where the inverter is only active when the clock allows.\n*   **Loading:** The input of $Inv_1$ adds capacitance to the input node (the line labeled $CK$ on the left). This **loading effect** can slow down the previous stage (if there is one driving this input) or increase the input delay.\n\n**Summary:**\nThe red inverter $Inv_1$ acts as a **backup driver** and a **parallel enhancer**.\n*   **Positive effects:** It enables the circuit to function (oscillate) when the main clock switch is open, and it improves switching speed and drive strength when the main clock switch is closed.\n*   **Negative effects:** It adds to the power consumption and input capacitance (loading).",
        "format": "markdown",
        "sha256": "fe63dc708698d27f0da02d6b37f488a870f5256a33bcc3675e813733abc4e9b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It mentions a speed improvement, but misidentifies the red inverter as a parallel driver rather than an unclocked feedforward path that bypasses part of the latch. It also misses the key low-frequency drawback and incorrectly says the branch enables proper operation when the switch is open.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 937,
        "output_tokens": 10828,
        "total_tokens": 11765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 937,
        "output_tokens": 10828,
        "total_tokens": 11765,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9931,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an analysis of how the red inverter ($Inv_1$) affects the performance.\n\nThe circuit appears to be a **clocked ring oscillator** or a similar sequential logic structure. It consists of a chain of inverters and switches controlled by a clock signal $CK$ and its complement $\\overline{CK}$. The red inverter $Inv_1$ is connected in parallel with the series combination of the switch labeled $CK$ and the first black inverter.\n\nThe red inverter affects the performance in two main ways, depending on the state of the clock signal $CK$:\n\n**1. Speed Improvement (When $CK = 1$)**\n*   **Condition:** When the clock signal $CK$ is high (logic 1), the switch labeled $CK$ closes, and the switch labeled $\\overline{CK}$ opens.\n*   **Action:** The path through the first black inverter becomes active. At the same time, the red inverter $Inv_1$ is always active. This means the red inverter and the first black inverter are effectively connected in **parallel** between the input node and the node after the first stage (let's call it node $Q_1$).\n*   **Performance Effect:** Having two inverters driving the same load node increases the total drive current (transconductance). A stronger drive current charges and discharges the load capacitance faster. This **reduces the propagation delay** and **improves the switching speed** (performance) of the first stage. It acts as a \"speed-up\" mechanism.\n\n**2. Enabling Functionality / Oscillation (When $CK = 0$)**\n*   **Condition:** When the clock signal $CK$ is low (logic 0), the switch labeled $CK$ opens, and the switch labeled $\\overline{CK}$ closes.\n*   **Action:** The path through the first black inverter is broken (open circuit). If the red inverter were not there, the signal from the input would be blocked, and the rest of the circuit (the subsequent inverters and the feedback loop) would not receive any signal. The circuit would be non-functional.\n*   **Performance Effect:** The red inverter $Inv_1$ provides an alternative, unbroken path for the signal to be inverted and passed to the next stage ($Q_1$). Since the switch $\\overline{CK}$ is now closed, this signal can propagate through the rest of the chain (Black Inverter $\\rightarrow$ Black Inverter $\\rightarrow$ feedback). This creates a closed loop with an odd number of inverters (Red $Inv_1$, second Black Inverter, third Black Inverter), which is the requirement for a **ring oscillator**. Therefore, the red inverter is essential for **enabling the circuit to oscillate** (function) when the main switch is open.\n\n**Summary:**\nThe red inverter $Inv_1$ serves as a **dual-purpose component**:\n*   It acts as a **parallel driver** to increase speed and drive strength when the main switch is closed.\n*   It acts as a **critical path component** to complete the circuit loop and allow oscillation when the main switch is open. Without it, the circuit would fail to operate in the $CK=0$ state.",
        "format": "markdown",
        "sha256": "f633807d9a8a7325a6f7bfe48817682b368713c0b72bafced1d48e54fd451323"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes a bypass path and the high-speed benefit, but mischaracterizes it as a parallel driver that enables useful oscillation. It misses that the unclocked branch can fight the main path at low clock rates and raises the minimum usable frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 937,
        "output_tokens": 10433,
        "total_tokens": 11370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9726,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 937,
        "output_tokens": 10433,
        "total_tokens": 11370,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9726,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis, I **partially agree** with the answer, but the explanation regarding the \"cross-coupled latch\" is **incorrect**.\n\nHere is a detailed breakdown:\n\n### 1. What is correct?\n*   **\"The red inverter acts as a keeper\":** This is functionally correct. In this context, a \"keeper\" is a circuit element that maintains a signal state. The red inverter ensures that the node at the output of `Inv1` (let's call it node $X$) is driven even when the main clock path is open.\n*   **\"This removes the minimum clock frequency requirement due to leakage\":** This is **correct**. In dynamic circuits (like simple clocked inverters without feedback), nodes can float and lose charge due to leakage currents when the clock switches. To prevent data loss, you would need to clock the circuit at a minimum frequency to \"refresh\" the state. By adding the red inverter and the feedback loop, the circuit becomes a **static latch** during the hold phase. Static latches can hold their state indefinitely (theoretically), so you no longer need a minimum clock frequency to prevent leakage-induced data loss.\n\n### 2. What is incorrect?\n*   **\"forming a cross-coupled latch with `Inv1`\":** This is **incorrect**.\n    *   **Not Cross-Coupled:** A cross-coupled latch typically consists of two inverters where the output of each is connected to the input of the other (e.g., Output A $\\rightarrow$ Input B, Output B $\\rightarrow$ Input A). Here, the red inverter and `Inv1` are effectively in parallel during the active phase (both try to drive the output node to the inverse of the input). They do not cross-couple.\n    *   **`Inv1` is not in the latch:** During the \"hold\" phase (when $CK$ is low and the switch $CK$ is open), `Inv1` is disconnected from the input (its input node floats). Therefore, `Inv1` is not part of the feedback loop that holds the state.\n\n### 3. What is the actual role of the red inverter?\n\nThe circuit shown is a **clocked inverter chain** (or a stage of a shift register/ring oscillator) designed to hold its state. Let's trace the two phases:\n\n*   **Active Phase ($CK = 1$):**\n    *   The switch $CK$ is closed, and $\\overline{CK}$ is open.\n    *   The signal flows from the input (left side) through the switch $CK$, through `Inv1`, to the output node (let's call it $V_{mid}$). So, $V_{mid} = \\text{NOT}(\\text{Input})$.\n    *   The red inverter also connects the Input to $V_{mid}$, so $V_{mid} = \\text{NOT}(\\text{Input})$. Both paths agree, reinforcing the signal.\n    *   The path to the next stage (through switch $\\overline{CK}$) is open, so the next stage is isolated.\n\n*   **Hold Phase ($CK = 0$):**\n    *   The switch $CK$ is open, and $\\overline{CK}$ is closed.\n    *   The input to `Inv1` is now floating (disconnected). If the red inverter weren't there, $V_{mid}$ would float, and the state would be lost.\n    *   **The Role of the Red Inverter:** The red inverter takes the feedback signal from the end of the chain (the bottom wire, let's call it $V_{out}$) and inverts it to drive $V_{mid}$. So, $V_{mid} = \\text{NOT}(V_{out})$.\n    *   Now, the closed switch $\\overline{CK}$ connects $V_{mid}$ to the next stage (`Inv2` $\\rightarrow$ `Inv3`).\n    *   The signal path is: $V_{out} \\rightarrow$ **Red Inverter** $\\rightarrow V_{mid} \\rightarrow$ Switch $\\overline{CK} \\rightarrow$ `Inv2` $\\rightarrow$ `Inv3` $\\rightarrow V_{out}$.\n    *   This loop contains 3 inverters (Red, `Inv2`, `Inv3`). An odd number of inverters in a feedback loop creates a **bistable latch** (it can hold a 0 or a 1 state).\n    *   Specifically: $V_{mid} = \\text{NOT}(V_{out})$. Then `Inv2` inverts it, `Inv3` inverts it again. So the output of `Inv3` is $\\text{NOT}(\\text{NOT}(\\text{NOT}(V_{mid}))) = \\text{NOT}(V_{mid}) = V_{out}$. The state is maintained.\n\n**Summary:**\nThe red inverter's actual role is to **close the feedback loop during the hold phase**. It drives the intermediate node ($V_{mid}$) from the main feedback line, allowing the subsequent inverter chain (`Inv2`, `Inv3`) to feed the signal back to the input. This creates a stable **latch** (not a cross-coupled latch with `Inv1`) that holds the circuit's state statically, eliminating the need for a minimum clock frequency to combat leakage.",
        "format": "markdown",
        "sha256": "a4c9f6fab2ff0ecd14232916017c83ba0e94ec6e86eee58dd8fe1ece58993b26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It correctly rejects a cross-coupled latch with Inv1, but misidentifies the red inverter’s connection as feedback rather than a feedforward path bypassing the CK switch and Inv1. It therefore reaches the opposite conclusion: the unclocked branch can cause low-frequency failure and raise the minimum usable clock rate, not eliminate it.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 986,
        "output_tokens": 11604,
        "total_tokens": 12590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 986,
        "output_tokens": 11604,
        "total_tokens": 12590,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10438,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, I **disagree** with the specific technical claim that the red inverter forms a \"cross-coupled latch\" with `Inv1`. However, the high-level intuition about it acting as a \"keeper\" and removing minimum frequency requirements is partially correct in the context of dynamic circuits or clocked ring oscillators.\n\nHere is a detailed breakdown:\n\n### 1. Why the answer is incorrect about the \"Cross-Coupled Latch\"\nA **cross-coupled latch** (like a basic SRAM cell or a flip-flop core) requires two inverters connected in a feedback loop where the output of one feeds the input of the other, and vice versa (Output A $\\rightarrow$ Input B $\\rightarrow$ Output B $\\rightarrow$ Input A).\n\nIn this diagram:\n*   The **red inverter** connects the node before the first switch ($CK$) to the node after `Inv1`. Let's call the input node $X$ and the output node $Y$. So, Red Inverter: $X \\rightarrow Y$ ($Y = \\text{NOT}(X)$).\n*   **`Inv1`** (with the switch $CK$) also connects node $X$ to node $Y$. When $CK=1$, $X \\rightarrow \\text{Inv1} \\rightarrow Y$ ($Y = \\text{NOT}(X)$).\n\nSince both inverters take the same input ($X$) and drive the same output ($Y$), they are connected in **parallel**, not cross-coupled. They are essentially two parallel paths performing the same inversion function.\n\n### 2. The Actual Role of the Red Inverter\nThe circuit shown is a **clocked ring oscillator** (or a gated delay line in a ring). The switches controlled by $CK$ and $\\overline{CK}$ determine whether the ring oscillates or holds its state.\n\n*   **When $CK = 1$ (Hold Phase):**\n    *   The first switch ($CK$) is **closed**. The second switch ($\\overline{CK}$) is **open**.\n    *   The signal path from the first stage to the rest of the chain is **broken** (open circuit at the second switch).\n    *   The first stage inverts the signal: $X \\rightarrow \\text{Inv1} \\rightarrow Y$ (and also $X \\rightarrow \\text{Red Inv} \\rightarrow Y$).\n    *   Because the loop is broken, the ring oscillator **stops oscillating**. The circuit effectively **latches** or holds its current state.\n    *   **Role of Red Inverter:** In this phase, `Inv1` is active, but the red inverter is also active. More importantly, it ensures that node $Y$ is driven to a valid logic level ($\\text{NOT}(X)$). While `Inv1` is doing this here, the red inverter is crucial for the other phase.\n\n*   **When $CK = 0$ (Run Phase):**\n    *   The first switch ($CK$) is **open**. The second switch ($\\overline{CK}$) is **closed**.\n    *   `Inv1` is disconnected from the input $X$ (its input is floating).\n    *   **Role of Red Inverter (The \"Keeper\"):** Since `Inv1` is disconnected, node $Y$ would float (become undefined) due to leakage if not for the red inverter. The red inverter connects $X$ to $Y$, ensuring $Y = \\text{NOT}(X)$. In this sense, it **acts as a keeper**, maintaining a valid logic level at node $Y$ when the main switching path (`Inv1`) is open.\n    *   The signal then passes through the closed second switch to the rest of the chain. Since the loop is closed (Red Inv $\\rightarrow$ Switch $\\rightarrow$ Inverters $\\rightarrow$ Feedback), the ring **oscillates**.\n\n### 3. \"Removes minimum clock frequency requirement\"\nThe statement is **correct in principle**, though the reasoning \"cross-coupled latch\" is wrong.\n*   In a standard dynamic ring oscillator, if the clock frequency is too low, leakage currents discharge the nodes before the next cycle, causing failure. This sets a minimum frequency ($f_{min}$).\n*   By adding the red inverter (and the gating switches), the circuit can be forced into a **static hold state** (when $CK=1$). In this state, the loop is broken, and the nodes (like $Y$) are held at valid logic levels by the inverters (red and `Inv1`).\n*   Because the circuit can hold its state statically (DC operation) when $CK=1$, you don't need a minimum frequency to keep it running or valid. You can stop the clock (or run it very slowly) and the state is preserved.\n\n### Summary\n*   **Do you agree?** No, not with the \"cross-coupled latch\" description. They are in parallel.\n*   **Actual role:** The red inverter acts as a **parallel active path** and a **keeper** for the intermediate node. It ensures that the first stage always inverts the input ($Y = \\text{NOT}(X)$), allowing the circuit to function as a **clock-controlled ring oscillator** that can be stopped (latched) by setting $CK=1$. This latching capability allows the circuit to operate at DC (0 Hz) or very low frequencies without losing state due to leakage.",
        "format": "markdown",
        "sha256": "db18ff32ec5ca14853b3723452e189c6ab2f9d3f1eb875547ae40c1e5e6ec41e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the cross-coupled-latch description and notes the red inverter’s connection, but misidentifies it as a keeper and claims it removes the minimum-frequency limit. The red inverter is an unclocked feedforward branch: it can help at high speeds but can overpower the intended latch behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 986,
        "output_tokens": 13826,
        "total_tokens": 14812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 986,
        "output_tokens": 13826,
        "total_tokens": 14812,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12638,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram and the principles of digital electronics (specifically dynamic logic and clocked circuits), here is an analysis of the answer provided.\n\n### **Do I agree with the answer?**\n\n**Partially.** The answer is correct about the **role** (keeper) and the **benefit** (mitigating leakage/minimum frequency), but incorrect about the **mechanism** (cross-coupled latch).\n\n1.  **\"The red inverter acts as a keeper...\"** -> **Agree.**\n2.  **\"...forming a cross-coupled latch with `Inv1`.\"** -> **Disagree.**\n3.  **\"This removes the minimum clock frequency requirement due to leakage.\"** -> **Agree (in principle).**\n\n---\n\n### **Detailed Analysis**\n\n#### **1. The Actual Role: A \"Keeper\" Inverter**\nThe circuit shown is a **clocked inverter** (or a stage in a clocked ring oscillator/shift register) combined with a feedback loop.\n*   **`Inv1` and the switches** form a clocked logic path. When $CK=1$, the first switch closes, allowing the signal at the input (node $CK$ side) to pass through `Inv1` to the output node (node $\\overline{CK}$ side). When $CK=0$, the switch opens, and `Inv1` is disconnected from the input. Its input becomes floating (high impedance), and its output node becomes high-impedance as well.\n*   **The Problem:** In dynamic logic or clocked circuits, when a logic gate is disabled (like `Inv1` when $CK=0$), its output node is left floating. Over time, **leakage currents** can discharge or charge this node, causing the stored logic value (0 or 1) to drift and eventually be lost. This imposes a **minimum clock frequency**: the clock must switch fast enough (period short enough) that the node doesn't leak away before the next update.\n*   **The Solution (The Red Inverter):** The red inverter is connected between the input node and the output node of the clocked stage. When $CK=0$ (the hold phase), `Inv1` is off. However, the red inverter is still active. It takes the value from the input node (which is being maintained by the feedback loop from the right side) and drives the output node to the inverted value.\n    *   Essentially, the red inverter acts as a **weak feedback path** (a **keeper**) that holds the voltage level on the high-impedance node. It counteracts leakage by constantly trying to restore the correct logic level.\n\n#### **2. Why \"Cross-Coupled Latch\" is Incorrect**\nThe answer claims the red inverter forms a \"cross-coupled latch\" with `Inv1`. This is technically incorrect for two reasons:\n*   **Connection Topology:** A cross-coupled latch (like an SR latch or the core of a flip-flop) consists of two inverters where the output of each is connected to the input of the other (Output A $\\rightarrow$ Input B, Output B $\\rightarrow$ Input A). In this diagram, the red inverter and `Inv1` are connected in **parallel** (their inputs are effectively tied to the same side, and their outputs are tied to the same node). They are not cross-coupled.\n*   **State of `Inv1`:** During the \"holding\" phase (when $CK=0$ and leakage is the concern), the switch for `Inv1` is open. `Inv1` is disabled (high impedance) and does not participate in the circuit. A latch requires active components to maintain the state. Here, only the red inverter (the keeper) is active in holding the value. `Inv1` is essentially out of the picture during the hold phase.\n\n#### **3. Minimum Clock Frequency Requirement**\nThe statement about removing the minimum clock frequency requirement is **conceptually correct**.\n*   In dynamic circuits (like Domino logic), there is a strict minimum clock frequency ($f_{min}$). If the clock is too slow, the \"hold\" time is too long, and leakage discharges the dynamic node, causing a logic error.\n*   By adding a **keeper** (the red inverter), the node is actively driven to the correct value, resisting leakage. This allows the circuit to hold the state for a longer time, effectively **lowering the minimum clock frequency** requirement (or relaxing it).\n\n### **Summary**\n*   **Correct:** The red inverter is a **keeper** (or holding inverter). It prevents the output node of `Inv1` from floating and losing its value due to leakage when the clock disables `Inv1`. This allows the circuit to operate at lower frequencies.\n*   **Incorrect:** It does **not** form a cross-coupled latch with `Inv1`. They are connected in parallel, and `Inv1` is inactive during the holding phase. The red inverter simply provides a weak feedback path to maintain the logic level.\n\n**Actual Role:** The red inverter acts as a **keeper inverter** to maintain the logic state on the high-impedance node (output of `Inv1`) during the clock low phase, mitigating leakage effects.",
        "format": "markdown",
        "sha256": "941db849a1b5121f6c441c2e7137166bf040e607f6f0ba5505c8ffecd4894cf2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the cross-coupled-latch description, but misidentifies the red inverter as a keeper and claims it lowers the minimum clock frequency. The actual branch is feedforward: it bypasses part of the latch path, helps at high speed, and can disrupt operation at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 986,
        "output_tokens": 16192,
        "total_tokens": 17178,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 986,
        "output_tokens": 16192,
        "total_tokens": 17178,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15059,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To optimize the circuit for the Noise Figure (NF) while maintaining an input resistance $R_{in} = 50 \\, \\Omega$, we need to analyze the relationship between the circuit parameters, the input impedance, and the noise sources.\n\n### 1. Circuit Analysis\nThe circuit shown is a **Common-Source (CS) amplifier with shunt-shunt feedback** (also known as a transimpedance amplifier configuration).\n*   **$M_1$**: The input NMOS transistor in a common-source configuration.\n*   **$M_2$**: A PMOS transistor connected as a diode-loaded current source (gate connected to drain). Its small-signal resistance looking into the drain is approximately $1/g_{m2}$.\n*   **$R_F$**: The feedback resistor connecting the output (drain) to the input (gate).\n*   **$C_1$**: A coupling capacitor (open circuit at DC, short circuit at signal frequencies).\n\n### 2. Input Resistance ($R_{in}$)\nFor a shunt-shunt feedback amplifier, the input resistance is reduced by the feedback factor. The approximate expression for the input resistance looking into the gate node (excluding $C_1$) is:\n$$R_{in} \\approx \\frac{R_F}{1 + A_v}$$\nwhere $A_v$ is the open-loop voltage gain of the CS stage.\nThe gain $A_v$ is approximately $-g_{m1} R_{load}$. Here, the load is the diode-connected $M_2$, so $R_{load} \\approx 1/g_{m2}$.\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}}$$\n\nSubstituting this into the $R_{in}$ equation:\n$$R_{in} \\approx \\frac{R_F}{1 + \\frac{g_{m1}}{g_{m2}}}$$\n\nGiven the constraint $R_{in} = 50 \\, \\Omega$, we have:\n$$50 = \\frac{R_F}{1 + \\frac{g_{m1}}{g_{m2}}} \\implies R_F = 50 \\left( 1 + \\frac{g_{m1}}{g_{m2}} \\right)$$\n\n### 3. Noise Analysis\nThe main noise sources in this circuit that affect the Noise Figure (NF) are:\n1.  **Thermal noise of the feedback resistor $R_F$**: The noise current is $i_{n, RF}^2 = \\frac{4kT}{R_F}$. This noise is injected at the input node.\n2.  **Channel thermal noise of transistor $M_1$**: The noise current is $i_{n, M1}^2 = 4kT \\gamma g_{m1}$ (where $\\gamma \\approx 2/3$ for long-channel devices).\n3.  **Noise of the load $M_2$**: Since $M_2$ is at the output, its noise is referred to the input divided by the gain squared ($A_v^2$). If $g_{m1} \\gg g_{m2}$, this contribution is small.\n\n### 4. Optimization Strategy\nThe goal is to minimize the Noise Figure (NF). NF is essentially the ratio of the output noise to the noise that would be present if the amplifier were noiseless. To minimize NF, we want to maximize the signal-to-noise ratio at the input.\n\n*   **Minimize $R_F$ noise**: The noise contribution from the feedback resistor is inversely proportional to $R_F$ ($\\propto 1/R_F$). Therefore, we want **$R_F$ to be as large as possible**.\n*   **Maintain $R_{in} = 50 \\, \\Omega$**: From the equation $R_F = 50 (1 + g_{m1}/g_{m2})$, to increase $R_F$ while keeping $R_{in}$ constant at $50 \\, \\Omega$, we must **increase the ratio $(1 + g_{m1}/g_{m2})$**.\n\nThis leads to the following optimization steps:\n\n1.  **Increase the ratio $g_{m1}/g_{m2}$**:\n    *   **Increase $g_{m1}$**: Increase the transconductance of the input transistor $M_1$ (by increasing its width $W$ or bias current $I_D$). This increases the amplifier gain ($A_v \\approx g_{m1}/g_{m2}$). A higher gain allows $R_F$ to be larger for the same input impedance match.\n    *   **Decrease $g_{m2}$**: Decrease the transconductance of the load transistor $M_2$ (by decreasing its width or bias current). This increases the load resistance ($1/g_{m2}$) and further increases the gain.\n\n2.  **Trade-off (The Balance)**:\n    *   While increasing $g_{m1}$ allows for a larger $R_F$ (reducing $R_F$ noise), it also **increases the channel noise of $M_1$** ($4kT \\gamma g_{m1}$).\n    *   Therefore, you cannot just increase $g_{m1}$ indefinitely. There is an optimal point where the reduction in feedback resistor noise balances the increase in transistor $M_1$ noise.\n\n### Conclusion\nTo optimize the circuit for NF:\n**You should increase the ratio $g_{m1}/g_{m2}$ (i.e., make $M_1$ much stronger than $M_2$).**\n\nThis allows the feedback resistor $R_F$ to be larger (since $R_F = 50(1 + g_{m1}/g_{m2})$), which significantly reduces the thermal noise contribution from $R_F$. The optimal design point is found by balancing this benefit against the increased thermal noise generated by the larger $g_{m1}$ of transistor $M_1$. Practically, this means biasing $M_1$ with a higher current/larger size relative to $M_2$.",
        "format": "markdown",
        "sha256": "b6e4ac1d3005cb7ab51ceca712540721587e1d2097d54b05e4c7868e7650c7e6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It partly gets the design direction by suggesting higher gm and a larger RF while maintaining the match. But it misidentifies M2 as diode-connected and omits the finite-output-resistance input-resistance relation; its claimed finite noise optimum also conflicts with the result that NF keeps falling as gm rises with RF adjusted.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 14143,
        "total_tokens": 16175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 14143,
        "total_tokens": 16175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12805,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram, this is a **shunt-shunt feedback amplifier** (also known as a transimpedance amplifier or resistive feedback LNA). The feedback resistor $R_F$ connects the output (drain of $M_1$) to the input (gate of $M_1$).\n\nTo optimize the Noise Figure (NF) while maintaining an input resistance $R_{in} = 50 \\, \\Omega$, we need to analyze the relationships between the circuit parameters and the noise performance.\n\n### 1. Circuit Analysis and Input Resistance ($R_{in}$)\nFor a common-source amplifier with shunt feedback resistor $R_F$ and a load resistance $R_{out}$ (which is the output resistance of the stage, roughly $r_{o1} \\parallel r_{o2} \\parallel R_F$), the input resistance is approximately given by:\n$$R_{in} \\approx \\frac{R_F}{1 + A_v} \\approx \\frac{R_F}{g_{m1} R_{out}}$$\nwhere $A_v = -g_{m1} R_{out}$ is the open-loop voltage gain (assuming $g_{m1} R_{out} \\gg 1$).\n\nGiven the constraint $R_{in} = 50 \\, \\Omega$, we have:\n$$50 \\approx \\frac{R_F}{g_{m1} R_{out}} \\implies R_F = 50 \\cdot g_{m1} R_{out}$$\nThis shows that for a fixed $R_{in}$, a larger loop gain ($g_{m1} R_{out}$) requires a larger feedback resistor $R_F$.\n\n### 2. Noise Figure (NF) Analysis\nThe noise figure for this resistive feedback topology is dominated by the thermal noise of the source resistance ($R_S = 50 \\, \\Omega$), the feedback resistor ($R_F$), and the channel thermal noise of the transistor $M_1$. The approximate expression for the Noise Figure is:\n$$NF \\approx 1 + \\frac{R_{in}}{R_F} + \\frac{R_{in} \\cdot \\gamma}{g_{m1} R_F^2}$$\nwhere $\\gamma$ is the noise coefficient (typically $2/3$ for long channel, $\\approx 1$ for short channel).\n\nSubstituting $R_{in} = 50$ and $R_F = 50 g_{m1} R_{out}$:\n$$NF \\approx 1 + \\frac{50}{50 g_{m1} R_{out}} + \\frac{50 \\gamma}{g_{m1} (50 g_{m1} R_{out})^2}$$\n$$NF \\approx 1 + \\frac{1}{g_{m1} R_{out}} + \\frac{\\gamma}{50 g_{m1} (g_{m1} R_{out})^2}$$\n\nLet $A_0 = g_{m1} R_{out}$ be the intrinsic loop gain (open-loop gain). The equation becomes:\n$$NF \\approx 1 + \\frac{1}{A_0} + \\frac{\\gamma}{50 g_{m1} A_0^2}$$\n\n### 3. Optimization Strategy\nTo minimize the NF, we need to **maximize the terms in the denominator**, specifically the loop gain $A_0 = g_{m1} R_{out}$ and the transconductance $g_{m1}$.\n\n*   **Maximize Loop Gain ($A_0 = g_{m1} R_{out}$):**\n    *   $R_{out}$ is primarily determined by the output resistance of the transistors, $r_{o1} \\approx \\frac{1}{\\lambda I_D}$. To increase $R_{out}$, we should **increase the channel length $L$** (which reduces the channel length modulation parameter $\\lambda$).\n    *   $g_{m1} R_{out} \\approx \\frac{2}{\\lambda V_{OV}}$, where $V_{OV}$ is the overdrive voltage. To maximize this, we should **minimize $V_{OV}$**. This is achieved by using a **large aspect ratio ($W/L$)**.\n\n*   **Maximize Transconductance ($g_{m1}$):**\n    *   $g_{m1} = \\sqrt{2 \\mu C_{ox} (W/L) I_D}$. To increase $g_{m1}$, we should **increase $W/L$**.\n    *   Note that for a fixed $W/L$, decreasing the bias current $I_D$ actually *decreases* $g_{m1}$ but *increases* $r_{o}$ (and thus $A_0$). Since $A_0 \\propto 1/\\sqrt{I_D}$ (for fixed $W/L$), **decreasing the bias current $I_D$** is beneficial for increasing the loop gain $A_0$, which is the dominant factor in reducing NF (the $1/A_0$ term).\n\n### Conclusion: How to Optimize\nTo optimize the Noise Figure while keeping $R_{in} = 50 \\, \\Omega$:\n\n1.  **Use a Long-Channel Transistor:** Increase the channel length $L$ of $M_1$. This increases the output resistance $r_o$ and the intrinsic gain $g_m r_o$, which is the most effective way to lower the noise figure.\n2.  **Increase the Width-to-Length Ratio ($W/L$):** Use a large $W/L$ for $M_1$. This allows for a lower overdrive voltage $V_{OV}$, maximizing the intrinsic gain $g_m r_o \\approx 2/(\\lambda V_{OV})$.\n3.  **Decrease the Bias Current ($I_D$):** Bias the transistor at a lower current. Since the loop gain $A_0 \\propto 1/\\sqrt{I_D}$ (for fixed $W/L$), a lower current increases the loop gain. A higher loop gain allows for a larger $R_F$ (since $R_F = 50 \\cdot A_0$), which significantly reduces the thermal noise contribution from the feedback resistor ($4kT/R_F$) and the transistor noise referred to the input.\n\n**Summary:** Optimize by using a **long-channel, large-$W/L$ transistor biased at a low current**. This maximizes the loop gain $g_{m1}R_{out}$, allowing for a larger feedback resistor $R_F$ that matches the 50 $\\Omega$ input impedance while minimizing noise.",
        "format": "markdown",
        "sha256": "4597bd454ec9b9fabe63fa7bb661569a8ec2c7ad5b5384a7f3dfd39e7998a5b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the shunt-feedback topology and the broad idea of retuning RF as gain changes, but misses the finite-output-resistance match relation and the inverter’s combined transconductance. Its NF model incorrectly predicts NF can approach 1 just by increasing loop gain, and its low-current recommendation conflicts with raising gm above 1/Rs. It captures some of the design direction but misses the key mechanism.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 17363,
        "total_tokens": 19395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 17363,
        "total_tokens": 19395,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15915,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, which is a **shunt-shunt feedback amplifier** (also known as a transimpedance amplifier or resistive feedback LNA), here is the step-by-step optimization strategy for the Noise Figure (NF) while maintaining an input resistance ($R_{in}$) of 50 $\\Omega$.\n\n### 1. Circuit Analysis\n*   **Topology:** The circuit consists of a common-source amplifier stage ($M_1$) with a feedback resistor $R_F$ connecting the output (drain) to the input (gate). $M_2$ acts as an active load (and in this specific configuration, its gate is connected to the input, adding to the effective transconductance).\n*   **Input Resistance ($R_{in}$):** For a shunt-shunt feedback amplifier, the input resistance is approximately given by:\n    $$R_{in} \\approx \\frac{R_F}{1 + A_{open}}$$\n    Where $A_{open}$ is the open-loop voltage gain of the stage. More accurately, considering the transconductance $G_m$ (which is $g_{m1} + g_{m2}$ in this case) and output resistance $R_{out}$ ($r_{o1} || r_{o2}$):\n    $$R_{in} = \\frac{R_F}{1 + (g_{m1} + g_{m2}) R_{out}}$$\n\n### 2. Noise Sources\nThe main noise contributors in this circuit are:\n1.  **Thermal noise of $R_F$:** $i_{n,RF}^2 = \\frac{4kT}{R_F}$.\n2.  **Channel thermal noise of $M_1$:** $i_{n,M1}^2 = 4kT\\gamma g_{m1}$.\n3.  **Channel thermal noise of $M_2$:** $i_{n,M2}^2 = 4kT\\gamma g_{m2}$.\n4.  **Source noise:** From the 50 $\\Omega$ source resistance ($4kT \\cdot 50$).\n\n### 3. Optimization Strategy\nThe goal is to minimize the Noise Figure (NF). The input-referred noise voltage squared ($V_{n,in}^2$) is dominated by the noise from $R_F$ and the transistors.\n\n**A. Maximize $R_F$**\nThe thermal noise contribution of the feedback resistor is inversely proportional to its resistance ($\\frac{4kT}{R_F}$). To minimize this noise, **$R_F$ should be as large as possible**.\n\n**B. Maintain $R_{in} = 50 \\, \\Omega$**\nFrom the equation $R_{in} = \\frac{R_F}{1 + G_m R_{out}}$, if we increase $R_F$ to reduce noise, the denominator $(1 + G_m R_{out})$ must increase proportionally to keep $R_{in}$ constant at 50 $\\Omega$. This means we need a **high open-loop gain** ($G_m R_{out}$).\n\n**C. Minimize Transistor Noise**\nThe input-referred channel noise of the transistors is approximately $\\frac{4kT\\gamma}{G_m}$ (assuming high loop gain). To minimize this, we need a **large effective transconductance ($G_m = g_{m1} + g_{m2}$)**.\n\n### 4. How to Implement the Optimization\nTo achieve the above conditions (Large $R_F$, High Gain, Large $G_m$), you should adjust the transistor parameters:\n\n1.  **Increase the Bias Current ($I_{bias}$):**\n    *   Increasing the current increases the transconductance ($g_m = \\frac{2I_D}{V_{OV}}$).\n    *   A larger $g_m$ reduces the input-referred noise of the transistors ($\\propto 1/g_m$).\n    *   A larger $g_m$ increases the loop gain ($g_m R_{out}$), which allows you to use a larger $R_F$ while maintaining the 50 $\\Omega$ input match.\n\n2.  **Increase the Channel Length ($L$):**\n    *   Increasing $L$ increases the output resistance ($r_o \\propto L$).\n    *   A larger $r_{out}$ increases the open-loop gain ($A_{open} = g_m R_{out}$).\n    *   This allows for a larger $R_F$ (reducing $R_F$ noise) while keeping $R_{in} = 50 \\, \\Omega$.\n    *   Larger $L$ also helps reduce flicker noise ($1/f$ noise).\n\n3.  **Increase the Width ($W$):**\n    *   Increasing $W$ reduces flicker noise and allows for lower current density, which is beneficial for NF. (Note: this increases input capacitance, which might affect bandwidth, but is good for NF).\n\n### Summary\nTo optimize the circuit for NF with $R_{in} = 50 \\, \\Omega$:\n*   **Make $R_F$ as large as possible.**\n*   **Increase the bias current** to increase $g_m$ (reduces transistor noise and increases loop gain).\n*   **Increase the channel length $L$** to increase $r_o$ (increases loop gain, allowing larger $R_F$).\n\nEssentially, you are trading power consumption (higher current) and area (larger $L, W$) for better noise performance. The high loop gain ensures that the noise from the transistors and the resistor $R_F$ is suppressed at the input.",
        "format": "markdown",
        "sha256": "d789139a8c8d4042b07cb231707b0e08d6254fe76776d2ad2991001d428dec77"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The main optimization direction is right: increase gm and RF while retuning feedback to maintain the 50-ohm match, which can reduce transistor-referred noise. However, the stated 'more accurate' input-resistance formula omits the +ro term in (RF + ro)/(1 + gm ro), and the answer does not explicitly connect gm > 1/Rs to NF falling below 1 + gamma.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 13276,
        "total_tokens": 15308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2032,
        "output_tokens": 13276,
        "total_tokens": 15308,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12041,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we analyze the circuit topology and the effect of feedback.\n\n**1. Circuit Analysis and Topology**\nThe circuit consists of an input stage with a current source $I_{in}$, input capacitance $C_{in}$, and input resistance $R_{in}$. The amplifier is built around transistor $M_1$ and a subsequent stage involving $M_2$ and $M_3$.\n*   **$M_1$**: Configured as a common-source (CS) amplifier. The input is at the gate (node $P$), and the output is at the drain (node $X$). The load is $R_{D1}$.\n*   **$M_2$ and $M_3$**: This block acts as a second amplification stage.\n    *   $M_2$ is a common-source amplifier with input at gate $X$ and source grounded.\n    *   $M_3$ is a common-gate (CG) amplifier (gate at AC ground $V_b$) with input at the source (connected to drain of $M_2$) and output at the drain ($V_{out}$).\n    *   The current source $I_{SS}$ provides bias. The relationship between the currents is $\\Delta i_{d3} \\approx -\\Delta i_{d2}$.\n*   **Feedback**: There is a feedback resistor $R_F$ connecting the output node $V_{out}$ to the input node $P$. This is a **shunt-shunt feedback** topology (voltage-current amplifier or transimpedance amplifier).\n\n**2. Voltage Gain Calculation ($A_v = V_{out} / V_p$)**\nLet's determine the gain from the input voltage $V_p$ (at node $P$) to the output voltage $V_{out}$.\n*   **Stage 1 ($M_1$)**:\n    The current through $M_1$ is $i_{d1} = g_{m1} V_p$. This current flows from node $X$ to ground.\n    The voltage at node $X$ is $V_x = -i_{d1} R_{D1} = -g_{m1} R_{D1} V_p$. (Assuming the input impedance of $M_2$ gate is infinite).\n*   **Stage 2 ($M_2$-$M_3$)**:\n    The voltage $V_x$ drives $M_2$. The current through $M_2$ is $i_{d2} = g_{m2} V_x$.\n    At the node connecting $M_2$ drain and $M_3$ source (let's call it node $S$), the KCL equation (small signal) with constant bias current $I_{SS}$ is $\\Delta i_{d2} + \\Delta i_{d3} = 0$, so $\\Delta i_{d3} = -\\Delta i_{d2} = -g_{m2} V_x$.\n    The output voltage $V_{out}$ is developed across $R_{D2}$ by the current $i_{d3}$ flowing out of the node (since $M_3$ is an NMOS, current flows drain to source, so it leaves node $V_{out}$). Wait, let's be precise:\n    Current $\\Delta i_{d3}$ flows from $V_{out}$ through $M_3$ to node $S$.\n    KCL at $V_{out}$: $\\Delta i_{d3} + \\frac{V_{out}}{R_{D2}} = 0 \\Rightarrow V_{out} = -\\Delta i_{d3} R_{D2}$.\n    Substituting $\\Delta i_{d3}$: $V_{out} = -(-g_{m2} V_x) R_{D2} = g_{m2} R_{D2} V_x$.\n*   **Total Gain**:\n    $V_{out} = g_{m2} R_{D2} (-g_{m1} R_{D1} V_p) = -g_{m1} g_{m2} R_{D1} R_{D2} V_p$.\n    So, the voltage gain is $A_v = \\frac{V_{out}}{V_p} = -g_{m1} g_{m2} R_{D1} R_{D2}$.\n    Since the gain is negative, the amplifier is inverting, and the feedback is **negative**.\n\n**3. Input Impedance Calculation**\nThe input impedance $Z_{in}$ is the impedance seen by the source $I_{in}$ at node $P$.\nThe components connected to node $P$ are:\n1.  $R_{in}$ and $C_{in}$ (external/source components).\n2.  The gate of $M_1$ (infinite impedance at low frequencies).\n3.  The feedback resistor $R_F$ connected to $V_{out}$.\n\nDue to the Miller effect (or shunt-shunt feedback analysis), the feedback resistor $R_F$ appears as an equivalent resistance at the input:\n$$R_{F, in} = \\frac{R_F}{1 - A_v}$$\nSince $A_v$ is negative ($A_v = -|A_v|$), we have:\n$$R_{F, in} = \\frac{R_F}{1 + |A_v|} = \\frac{R_F}{1 + g_{m1} g_{m2} R_{D1} R_{D2}}$$\n\nThe total input impedance $Z_{in}$ is the parallel combination of $R_{in}$, the capacitive reactance of $C_{in}$, and the effective feedback resistance $R_{F, in}$.\n\n$$Z_{in} = R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\parallel \\frac{R_F}{1 + g_{m1} g_{m2} R_{D1} R_{D2}}$$\n\nOr in admittance form:\n$$Y_{in} = \\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 + g_{m1} g_{m2} R_{D1} R_{D2}}{R_F}$$\n\n$$Z_{in} = \\left( \\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 + g_{m1} g_{m2} R_{D1} R_{D2}}{R_F} \\right)^{-1}$$\n\n**Summary:**\nThe input impedance is dominated by the feedback resistor reduced by the loop gain. At low frequencies (ignoring $C_{in}$), the input resistance is approximately:\n$$R_{in, total} \\approx R_{in} \\parallel \\frac{R_F}{1 + g_{m1} g_{m2} R_{D1} R_{D2}}$$\nIf $g_{m1} g_{m2} R_{D1} R_{D2} \\gg 1$, then $R_{in, total} \\approx \\frac{R_F}{g_{m1} g_{m2} R_{D1} R_{D2}}$.",
        "format": "markdown",
        "sha256": "6eda4827e33f5cab6d1fddd9db158fa8f4e91c03fc6b42b3ec56e48c7c585d3d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the shunt-feedback/Miller mechanism and the resulting low input resistance, but gives the wrong gain and omits the output-side resistance term. The required result is Rin = (RF + RD2)/(1 + A0), not RF/(1 + gm1 gm2 RD1 RD2).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 183,
        "output_tokens": 19434,
        "total_tokens": 19617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17837,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 183,
        "output_tokens": 19434,
        "total_tokens": 19617,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17837,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we analyze the topology and the components connected to the input node $P$.\n\n**1. Circuit Topology Analysis**\nThe circuit is a **shunt-shunt feedback amplifier** (also known as a transimpedance amplifier).\n*   **Input:** Current $I_{in}$ is applied at node $P$.\n*   **Feedback:** The resistor $R_F$ connects the output node $V_{out}$ to the input node $P$. This is a shunt connection at both the input and the output.\n*   **Amplifier Stage:** $M_1$ acts as the input transistor (common-source configuration, as the source is grounded). The subsequent transistors $M_2$ and $M_3$ form the gain stage.\n\n**2. Input Impedance Components**\nThe total input impedance $Z_{in}$ seen at node $P$ (looking from the source $I_{in}$) is the parallel combination of:\n1.  The source impedance components: Resistor $R_{in}$ and Capacitor $C_{in}$.\n2.  The input impedance of the amplifier circuit itself (looking into node $P$ from the right).\n\n**3. Amplifier Input Impedance (Miller Effect)**\nThe amplifier input at node $P$ consists of:\n*   The gate of transistor $M_1$, which has infinite impedance (open circuit) in the low-frequency small-signal model.\n*   The feedback resistor $R_F$, which connects node $P$ (voltage $V_p$) to the output node $V_{out}$ (voltage $V_{out}$).\n\nLet $A_v = \\frac{V_{out}}{V_p}$ be the open-loop voltage gain of the amplifier.\nUsing the **Miller Theorem**, the feedback resistor $R_F$ appears as an equivalent impedance $Z_{Miller}$ at the input node $P$:\n$$Z_{Miller} = \\frac{R_F}{1 - A_v}$$\n\nIf the circuit is designed for negative feedback (which is typical for such amplifiers to be stable), the gain $A_v$ is negative. Let $A_v = -A$ where $A > 0$. Then:\n$$Z_{Miller} = \\frac{R_F}{1 + A}$$\nIf the loop gain is large ($A \\gg 1$), this impedance is significantly reduced: $Z_{Miller} \\approx \\frac{R_F}{A}$.\n\n**4. Total Input Impedance**\nThe total input impedance $Z_{in}$ is the parallel combination of $R_{in}$, $C_{in}$, and $Z_{Miller}$:\n\n$$Z_{in} = R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\parallel \\frac{R_F}{1 - A_v}$$\n\nOr in terms of admittance $Y_{in}$:\n$$Y_{in} = \\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 - A_v}{R_F}$$\n\n**Estimation of Gain $A_v$:**\n*   The first stage ($M_1$ with load $R_{D1}$) is a common-source amplifier with gain $A_1 \\approx -g_{m1} (R_{D1} \\parallel r_{o1})$.\n*   The second stage ($M_2, M_3$) provides additional gain $A_2$.\n*   Total gain $A_v = A_1 \\cdot A_2$.\n\nAssuming the second stage acts as a buffer or has gain $A_2$, the input impedance is dominated by the feedback term if the gain is high.\n\n**Final Expression:**\nThe input impedance of the circuit is:\n$$ \\mathbf{Z_{in} = R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\parallel \\frac{R_F}{1 - A_v}} $$\nwhere $A_v = V_{out} / V_p$ is the voltage gain of the amplifier. For a stable negative feedback amplifier ($A_v < 0$), this becomes:\n$$ Z_{in} \\approx R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\parallel \\frac{R_F}{1 + |A_v|} $$",
        "format": "markdown",
        "sha256": "5e84e94ce85af4e2dd7d0ea37aa7c17ee847a4045a60300324a2813e5952e162"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies shunt-shunt feedback and the Miller reduction of input resistance, but omits the required finite-output-resistance term and specified unloaded gain, so it does not give Rin = (RF + RD2)/(1 + A0). It also introduces Rin and Cin not present in the stated model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 183,
        "output_tokens": 24160,
        "total_tokens": 24343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23210,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 183,
        "output_tokens": 24160,
        "total_tokens": 24343,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23210,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the input impedance of the circuit, we analyze it as a transimpedance amplifier (TIA) with shunt-shunt feedback.\n\n**1. Circuit Analysis and Topology**\n*   **Input Stage:** The input current $I_{in}$ is applied to node $P$. The components $R_{in}$ and $C_{in}$ are connected from node $P$ to ground. The gate of transistor $M_1$ is connected to node $P$.\n*   **Amplifier Stages:**\n    *   $M_1$ is a common-source amplifier. Its gate is at $P$, source is grounded, and drain is at node $X$.\n    *   The second stage involves transistors $M_2$ and $M_3$. $M_2$ has its gate at $X$ and source grounded. $M_3$ has its gate at $V_b$ (AC ground) and source at $V_{out}$. Their drains are connected together to the tail of the current source $I_{SS}$. This configuration acts as a transconductance stage converting the voltage at $X$ to a voltage at $V_{out}$.\n*   **Feedback:** The resistor $R_F$ connects the output node $V_{out}$ to the input node $P$. This is a **shunt-shunt feedback** topology (voltage sampling at output, current mixing at input).\n\n**2. Small-Signal Gain Calculation**\nLet's determine the open-loop voltage gain $A_v = V_{out} / V_P$.\n*   **Stage 1 ($M_1$):** For a common-source amplifier with load $R_{D1}$ (and assuming output resistance $r_{o1}$ is large or included in $R_{D1}$), the voltage at node $X$ is:\n    $$V_X = -g_{m1} V_P (R_{D1} \\parallel r_{o1})$$\n    Let $R_{L1} = R_{D1} \\parallel r_{o1}$. So, $V_X = -g_{m1} R_{L1} V_P$.\n\n*   **Stage 2 ($M_2, M_3$):** The node connecting the drains of $M_2$ and $M_3$ (let's call it $Y$) has the current source $I_{SS}$ connected to it. For small signals, $I_{SS}$ is an open circuit. Thus, the sum of small-signal drain currents is zero: $i_{d2} + i_{d3} = 0$.\n    *   For $M_2$ (NMOS): $i_{d2} \\approx g_{m2} V_{GS2} = g_{m2} V_X$ (flowing from $Y$ to ground).\n    *   For $M_3$ (NMOS): $V_{GS3} = V_G - V_S = 0 - V_{out} = -V_{out}$. The current $i_{d3} \\approx g_{m3} V_{GS3} = -g_{m3} V_{out}$ (flowing from $Y$ to $V_{out}$).\n    *   KCL at node $Y$: $g_{m2} V_X - g_{m3} V_{out} = 0 \\Rightarrow V_{out} = \\frac{g_{m2}}{g_{m3}} V_X$.\n    *(Note: This assumes $r_o$ effects are negligible or the load $R_{D2}$ is large enough. More accurately, the output impedance of this stage is roughly $1/g_{m3}$, and with load $R_{D2}$, the gain is modified, but the core relationship holds for high gain).*\n\n*   **Total Open-Loop Gain ($A_v$):**\n    Substituting $V_X$:\n    $$V_{out} = \\frac{g_{m2}}{g_{m3}} (-g_{m1} R_{L1} V_P) = - \\frac{g_{m1} g_{m2} R_{L1}}{g_{m3}} V_P$$\n    So, the magnitude of the voltage gain is $|A_v| = \\frac{g_{m1} g_{m2} R_{D1}}{g_{m3}}$ (assuming $r_{o1} \\gg R_{D1}$).\n\n**3. Input Impedance Calculation**\nThe circuit uses shunt-shunt feedback. According to Miller's theorem (or feedback theory), the feedback resistor $R_F$ connected between the input ($V_P$) and output ($V_{out} = -|A_v| V_P$) appears as an equivalent resistance at the input:\n$$R_{F, eff} = \\frac{R_F}{1 - A_v} = \\frac{R_F}{1 + |A_v|}$$\n\nThe total input impedance $Z_{in}$ at node $P$ is the parallel combination of the input components ($R_{in}$, $C_{in}$) and the effective feedback resistance $R_{F, eff}$.\n\n$$Z_{in} = R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\parallel R_{F, eff}$$\n\nSubstituting $R_{F, eff}$:\n$$Z_{in} = R_{in} \\parallel \\frac{1}{j\\omega C_{in}} \\parallel \\left( \\frac{R_F}{1 + \\frac{g_{m1} g_{m2} R_{D1}}{g_{m3}}} \\right)$$\n\nIn admittance form ($Y_{in} = 1/Z_{in}$):\n$$Y_{in} = \\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1 + \\frac{g_{m1} g_{m2} R_{D1}}{g_{m3}}}{R_F}$$\n\n**Final Expression:**\nThe input impedance is approximately:\n$$ Z_{in} \\approx \\left( \\frac{1}{R_{in}} + j\\omega C_{in} + \\frac{1}{R_F} \\left( 1 + \\frac{g_{m1} g_{m2} R_{D1}}{g_{m3}} \\right) \\right)^{-1} $$\n\nIf we consider only the resistive part (at low frequencies or for the input resistance $R_{in, total}$):\n$$ R_{in, total} = R_{in} \\parallel \\frac{R_F}{1 + \\frac{g_{m1} g_{m2} R_{D1}}{g_{m3}}} $$\n\nSince the gain $|A_v|$ is typically large ($|A_v| \\gg 1$), the input resistance is dominated by the feedback term:\n$$ R_{in, total} \\approx \\frac{R_F \\cdot g_{m3}}{g_{m1} g_{m2} R_{D1}} $$",
        "format": "markdown",
        "sha256": "f8ffa04aaac680509efd0e81ed396d6f2dd8cb77e5fec9515981cc258891cb30"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes shunt-shunt feedback and the qualitative Miller reduction of input resistance, but its second-stage model and gain are incorrect. It omits the output-side resistance term, so it misses the required result \\(R_{in}=(R_F+R_{D2})/(1+A_0)\\), and adds unsupported input elements.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 183,
        "output_tokens": 19208,
        "total_tokens": 19391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17653,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 183,
        "output_tokens": 19208,
        "total_tokens": 19391,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17653,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise caused by the thermal noise of the LDO regulator, we need to determine how the noise voltage at the LDO output ($V_{out}$) modulates the oscillation phase of the VCO. This is a supply noise sensitivity problem.\n\nHere is the step-by-step computation method:\n\n### 1. Model the Noise Source\nThe LDO regulator generates thermal noise at its output. Let's model this as a small-signal noise voltage $v_n(t)$ in series with the DC supply voltage $V_{out}$.\n*   The power spectral density (PSD) of this noise is given as $S_{th}$ (in units of $V^2/Hz$).\n*   The total supply voltage seen by the VCO is $V_{supply}(t) = V_{out} + v_n(t)$.\n\n### 2. Identify the Modulation Mechanism\nIn this LC-VCO circuit, the DC voltage at the tank nodes $X$ and $Y$ is determined by the supply voltage $V_{out}$ (assuming ideal inductors $L_1$ with zero DC resistance). Therefore, $V_{X,DC} = V_{Y,DC} \\approx V_{out}$.\n\nThe oscillation frequency $\\omega_{osc}$ of an LC tank is given approximately by:\n$$ \\omega_{osc} \\approx \\frac{1}{\\sqrt{L_{eff} C_{total}}} $$\nwhere $C_{total}$ is the total capacitance of the tank. This capacitance includes:\n*   The varactor banks $B_1$ and $B_2$.\n*   The MOS varactors $M_{v1}$ and $M_{v2}$ (whose capacitance depends on $V_{GD} = V_{cont} - V_{out}$).\n*   Parasitic capacitances of the cross-coupled transistors $M_1, M_2$ (specifically $C_{db}$, drain-to-bulk, which depends on $V_{DB} \\approx V_{out}$).\n\nSince $C_{total}$ is a function of the DC voltage at nodes $X$ and $Y$ (which is $V_{out}$), any noise $v_n(t)$ on the supply rail will cause a fluctuation in capacitance $\\Delta C(t)$, which in turn modulates the frequency.\n\n### 3. Determine the Voltage-to-Frequency Sensitivity ($K_{V, supply}$)\nLet's define the sensitivity of the oscillation frequency to the supply voltage as $K_{V, supply}$:\n$$ K_{V, supply} = \\frac{\\partial \\omega_{osc}}{\\partial V_{out}} $$\n\nUsing the approximation $\\omega_{osc} \\approx (L_{eff} C_{total})^{-1/2}$, we can derive this sensitivity:\n$$ \\frac{\\partial \\omega_{osc}}{\\partial V_{out}} \\approx -\\frac{1}{2} \\frac{\\omega_{osc}}{C_{total}} \\frac{\\partial C_{total}}{\\partial V_{out}} $$\nSo,\n$$ K_{V, supply} = -\\frac{\\omega_0}{2 C_{total}} \\frac{\\partial C_{total}}{\\partial V_{out}} $$\nwhere $\\omega_0$ is the nominal oscillation frequency and $\\frac{\\partial C_{total}}{\\partial V_{out}}$ is the rate of change of total tank capacitance with respect to the supply voltage.\n\nThe instantaneous frequency deviation $\\Delta \\omega(t)$ caused by the noise $v_n(t)$ is:\n$$ \\Delta \\omega(t) = K_{V, supply} \\cdot v_n(t) $$\n\n### 4. Relate Frequency Deviation to Phase Noise\nThe phase $\\phi(t)$ is the integral of the frequency deviation:\n$$ \\phi(t) = \\int \\Delta \\omega(t) \\, dt = \\int K_{V, supply} \\cdot v_n(t) \\, dt $$\n\nIn the frequency domain (considering an offset frequency $\\omega_m$ from the carrier), the integration becomes division by $j\\omega_m$:\n$$ \\Phi(\\omega_m) = \\frac{K_{V, supply}}{j\\omega_m} V_n(\\omega_m) $$\n\nThe Power Spectral Density (PSD) of the phase noise $S_\\phi(\\omega_m)$ is:\n$$ S_\\phi(\\omega_m) = \\left| \\frac{K_{V, supply}}{j\\omega_m} \\right|^2 S_{th} = \\frac{K_{V, supply}^2}{\\omega_m^2} S_{th} $$\n\n### 5. Compute the Single-Sideband Phase Noise $\\mathcal{L}(\\omega_m)$\nThe standard definition for single-sideband phase noise $\\mathcal{L}(\\omega_m)$ is half the phase noise PSD:\n$$ \\mathcal{L}(\\omega_m) = \\frac{S_\\phi(\\omega_m)}{2} $$\n\nSubstituting the expression for $S_\\phi$:\n$$ \\mathcal{L}(\\omega_m) = \\frac{K_{V, supply}^2}{2 \\omega_m^2} S_{th} $$\n\n### Final Formula\nSubstituting the expression for $K_{V, supply}$:\n\n$$ \\mathcal{L}(\\omega_m) = \\frac{1}{2 \\omega_m^2} \\left( \\frac{\\omega_0}{2 C_{total}} \\frac{\\partial C_{total}}{\\partial V_{out}} \\right)^2 S_{th} $$\n\n**Summary of the result:**\nThe phase noise contribution from the LDO thermal noise will have a **$1/\\omega_m^2$ dependence** (a white frequency noise floor converted to phase noise). To compute the specific value, you need to:\n1.  Find the total tank capacitance $C_{total}$ at the operating point.\n2.  Calculate the derivative $\\frac{\\partial C_{total}}{\\partial V_{out}}$ (considering varactor tuning curves and MOS parasitic capacitances $C_{db}$).\n3.  Calculate the sensitivity $K_{V, supply}$.\n4.  Plug $K_{V, supply}$ and $S_{th}$ into the final formula above.",
        "format": "markdown",
        "sha256": "bf2bfc6fedfb6856556dbe79e2e7cb12e9fb478ec4d568c0ecb39071e09f2e52"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly derives phase noise from supply-to-frequency sensitivity and obtains the expected 1/offset-frequency-squared dependence. It identifies varactor capacitance as a coupling path, but omits the key design insight that Kpush is closely related to KVCO here and that reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2547,
        "output_tokens": 10543,
        "total_tokens": 13090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2547,
        "output_tokens": 10543,
        "total_tokens": 13090,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9172,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise generated by the thermal noise of the LDO regulator, we need to determine how the noise voltage at the LDO output ($V_{out}$) modulates the phase of the VCO oscillation.\n\nHere is the step-by-step methodology:\n\n### 1. Identify the Noise Source\nThe LDO regulator generates thermal noise at its output node $V_{out}$. Let this noise voltage be $v_{n, LDO}(t)$. The problem states its spectrum is $S_{th}$. This is the Power Spectral Density (PSD) of the voltage noise, typically in units of $V^2/Hz$.\n$$S_{v, LDO}(\\omega) = S_{th}(\\omega)$$\n\n### 2. Determine the Transfer Function\nWe need to find the transfer function from the supply voltage noise to the output phase noise. Let $H_{supply \\to \\phi}(\\omega)$ be the transfer function from the LDO output voltage noise $V_{n, LDO}(\\omega)$ to the VCO output phase $\\Phi_{out}(\\omega)$.\n\nThe relationship is:\n$$\\Phi_{out}(\\omega) = H_{supply \\to \\phi}(\\omega) \\cdot V_{n, LDO}(\\omega)$$\n\nThe output phase noise PSD, $S_\\phi(\\omega)$ (in $rad^2/Hz$), is then computed as:\n$$S_\\phi(\\omega) = \\left| H_{supply \\to \\phi}(\\omega) \\right|^2 \\cdot S_{th}(\\omega)$$\n\n### 3. Computing the Transfer Function $H_{supply \\to \\phi}(\\omega)$\nThere are two main ways to model this, depending on the frequency offset range:\n\n**A. Low-Frequency Offset (Supply Sensitivity Model)**\nAt low offset frequencies (close to the carrier), the supply noise primarily modulates the oscillation frequency of the VCO. This is characterized by the **Supply Sensitivity** ($K_{supply}$).\n*   Define $K_{supply} = \\frac{\\partial \\omega_0}{\\partial V_{out}}$ (rad/s/V), which is the change in oscillation frequency per unit change in supply voltage.\n*   The supply noise $v_{n, LDO}(t)$ causes an instantaneous frequency variation: $\\omega(t) = \\omega_0 + K_{supply} \\cdot v_{n, LDO}(t)$.\n*   The phase is the integral of frequency: $\\phi(t) = \\int \\omega(t) dt = \\omega_0 t + K_{supply} \\int v_{n, LDO}(t) dt$.\n*   In the frequency domain, integration corresponds to division by $j\\omega$. So, the transfer function is:\n    $$H_{supply \\to \\phi}(\\omega) \\approx \\frac{K_{supply}}{j\\omega}$$\n*   **Resulting Phase Noise PSD:**\n    $$S_\\phi(\\omega) = \\frac{K_{supply}^2}{\\omega^2} S_{th}(\\omega)$$\n    *(Note: In terms of frequency $f$, $\\omega = 2\\pi f$, so $S_\\phi(f) = \\frac{K_{supply}^2}{(2\\pi f)^2} S_{th}(f)$)*.\n\n**B. General/High-Frequency Model (Voltage Noise Conversion)**\nAt higher offsets, the LC tank and the differential structure of the VCO reject the common-mode supply noise. However, the rejection is not infinite due to the finite output impedance of the tail current source $I_{VCO}$ (let's call it $Z_{tail}$ or $R_{ss}$) and circuit mismatch.\n1.  **Find Supply-to-Output-Voltage Transfer Function:** Determine the transfer function $H_{supply \\to v}(\\omega)$ from the supply noise $V_{n, LDO}$ to the differential output voltage noise $V_{diff, n}$ at nodes X and Y.\n    *   The noise $V_{n, LDO}$ is injected as a common-mode signal at the top of the inductors $L_1$.\n    *   The common-mode noise is converted to differential noise primarily through the finite impedance $Z_{tail}$ of the current source $I_{VCO}$.\n    *   $V_{diff, n}(\\omega) = H_{supply \\to v}(\\omega) \\cdot V_{n, LDO}(\\omega)$.\n2.  **Convert Voltage Noise to Phase Noise:** The phase noise PSD is related to the output voltage noise PSD $S_v(\\omega) = |H_{supply \\to v}(\\omega)|^2 S_{th}(\\omega)$ by the oscillation amplitude.\n    *   Let $A$ be the peak amplitude of the differential output swing (or use $V_{pp}$). The carrier power is proportional to $A^2$.\n    *   The relationship is approximately: $S_\\phi(\\omega) = \\frac{2}{A^2} S_v(\\omega)$ (for single-ended amplitude $A$) or more generally $S_\\phi(\\omega) = \\frac{S_v(\\omega)}{P_{carrier}}$.\n    *   So, $S_\\phi(\\omega) = \\frac{2}{A^2} \\left| H_{supply \\to v}(\\omega) \\right|^2 S_{th}(\\omega)$.\n\n**C. AM-PM Conversion**\nAdditionally, the supply noise modulates the amplitude of the oscillation (AM). Due to non-linearities in the circuit (especially the varactors $M_{v1}, M_{v2}$ and the cross-coupled transistors $M_1, M_2$), this amplitude modulation is converted to phase modulation (PM). This is characterized by an AM-PM conversion coefficient $\\alpha_{AM-PM}$. This effect is often captured within the full transfer function $H_{supply \\to \\phi}(\\omega)$ derived via simulation or the Impulse Sensitivity Function (ISF) method.\n\n### Summary Formula\nThe most direct computation for the phase noise contribution from the LDO is:\n\n$$ \\mathcal{L}(\\Delta f) \\approx \\frac{S_{th}(\\Delta f)}{2 V_{swing}^2} \\left| H_{supply \\to \\phi}(\\Delta f) \\right|^2 $$\n\nOr simply in terms of PSD:\n$$ S_\\phi(f) = \\left| H_{supply \\to \\phi}(f) \\right|^2 S_{th}(f) $$\n\nWhere $H_{supply \\to \\phi}(f)$ can be approximated as $\\frac{K_{supply}}{j 2 \\pi f}$ for low offsets, taking into account the supply sensitivity of the specific VCO design.",
        "format": "markdown",
        "sha256": "9c3656be0ee7f2887c87d17963951df4e4c4ada6963d442829883fe068f9880d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly models supply pushing as frequency sensitivity and integrates the resulting frequency noise to obtain the 1/offset-frequency-squared phase-noise dependence. It omits the circuit-specific direct-varactor/KVCO design insight and adds a potentially misleading common-mode/high-frequency explanation.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2547,
        "output_tokens": 19241,
        "total_tokens": 21788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17749,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2547,
        "output_tokens": 19241,
        "total_tokens": 21788,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17749,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "To compute the VCO output phase noise caused by the thermal noise of the LDO regulator, we need to analyze how the noise voltage at the LDO output ($V_{out}$) couples into the oscillator and modulates its phase.\n\nHere is the step-by-step method to compute this:\n\n### 1. Identify the Noise Source and Coupling Path\n*   **Noise Source:** The LDO generates a voltage noise at its output $V_{out}$. Let's denote this noise voltage as $v_n(t)$ with a power spectral density (PSD) $S_{th}(f)$ (units: $V^2/Hz$).\n*   **Coupling Path:** The noise $v_n(t)$ is present at the supply rail $V_{out}$. This rail is connected to the LC tank inductors $L_1$. Since the noise is on the supply rail, it appears as a **common-mode noise** to the differential oscillator nodes $X$ and $Y$.\n*   **Mechanism:** The supply voltage variation modulates the oscillation frequency and amplitude.\n    *   **Frequency Modulation (FM):** The supply voltage affects the oscillation frequency $\\omega_0$. This is characterized by the **Supply Tuning Gain** (or Supply Sensitivity), $K_{supply}$.\n    *   **AM-PM Conversion:** The supply noise causes variations in the oscillation amplitude. Due to non-linearities in the circuit (e.g., variation of parasitic capacitances $C_{gd}$ in $M_1/M_2$ or non-linear inductance), amplitude variations convert to phase variations.\n\n### 2. Determine the Supply Tuning Gain ($K_{supply}$)\nThe most significant effect of supply noise in a VCO is usually the modulation of the oscillation frequency. We define the supply tuning gain $K_{supply}$ as the change in oscillation frequency per unit change in supply voltage.\n\n$$ K_{supply} = \\frac{\\partial \\omega_0}{\\partial V_{out}} \\quad \\text{(rad/s/V)} $$\n\n*   **How to find it:** You can determine $K_{supply}$ by simulating or measuring the VCO. Sweep the DC voltage $V_{out}$ (the output of the LDO) over a small range and measure the resulting change in oscillation frequency $\\Delta f_0$ or $\\Delta \\omega_0$.\n    $$ K_{supply} \\approx \\frac{\\Delta \\omega_0}{\\Delta V_{out}} $$\n    *(Note: If using frequency in Hz, $K_{f} = \\frac{\\Delta f_0}{\\Delta V_{out}}$ in Hz/V, then $\\omega_0 = 2\\pi f_0$ and $K_{supply, rad} = 2\\pi K_f$.)*\n\n### 3. Model the Phase Modulation\nThe noise voltage $v_n(t)$ at $V_{out}$ causes an instantaneous frequency deviation $\\Delta \\omega(t)$:\n$$ \\Delta \\omega(t) = K_{supply} \\cdot v_n(t) $$\n\nThe phase $\\phi(t)$ is the integral of the frequency:\n$$ \\phi(t) = \\int \\Delta \\omega(t) \\, dt = K_{supply} \\int v_n(t) \\, dt $$\n\nIn the frequency domain (for a specific offset frequency $f$), integration corresponds to division by $j2\\pi f$:\n$$ \\Phi(f) = \\frac{K_{supply}}{j 2 \\pi f} V_n(f) $$\n\n### 4. Compute the Phase Noise PSD\nThe power spectral density of the phase noise, $S_{\\phi}(f)$, is the expected value of the squared magnitude of the phase perturbation:\n$$ S_{\\phi}(f) = |\\Phi(f)|^2 = \\left| \\frac{K_{supply}}{j 2 \\pi f} \\right|^2 S_{th}(f) $$\n\n$$ S_{\\phi}(f) = \\frac{K_{supply}^2}{(2 \\pi f)^2} S_{th}(f) $$\n\nWhere:\n*   $S_{\\phi}(f)$ is the phase noise PSD in $rad^2/Hz$.\n*   $K_{supply}$ is the supply tuning gain in $rad/s/V$.\n*   $S_{th}(f)$ is the LDO noise spectrum in $V^2/Hz$.\n*   $f$ is the offset frequency from the carrier (in Hz).\n\n### 5. Convert to Single-Sideband Phase Noise ($\\mathcal{L}(f)$)\nUsually, phase noise is reported in dBc/Hz, denoted as $\\mathcal{L}(f)$. The relationship is $\\mathcal{L}(f) = \\frac{S_{\\phi}(f)}{2}$ (for small phase deviations).\n\n$$ \\mathcal{L}_{LDO}(f) = 10 \\log_{10} \\left( \\frac{K_{supply}^2 \\cdot S_{th}(f)}{2 (2 \\pi f)^2} \\right) \\text{ [dBc/Hz]} $$\n\n**Alternative formulation using $K_f$ (Hz/V):**\nIf you define $K_f = \\frac{\\partial f_0}{\\partial V_{out}}$ in Hz/V:\n$$ \\mathcal{L}_{LDO}(f) = 10 \\log_{10} \\left( \\frac{K_f^2 \\cdot S_{th}(f)}{2 f^2} \\right) \\text{ [dBc/Hz]} $$\n\n### Summary of the Computation Steps:\n1.  **Characterize LDO Noise:** Obtain $S_{th}(f)$ from the LDO datasheet or simulation.\n2.  **Characterize VCO Supply Sensitivity:** Determine $K_{supply}$ (or $K_f$) by sweeping $V_{out}$ and measuring the frequency shift $\\Delta f_0$. This parameter captures both direct frequency modulation and AM-PM conversion effects caused by the supply noise.\n3.  **Apply the Formula:** Use the formula $S_{\\phi}(f) = \\frac{K_{supply}^2}{(2\\pi f)^2} S_{th}(f)$ to calculate the phase noise contribution at any offset frequency $f$.\n\n**Note on Impedance Coupling:**\nStrictly speaking, the noise $v_n$ is not fully applied to the oscillation nodes $X$ and $Y$ because of the series inductors $L_1$. The effective noise voltage at the tank nodes is attenuated by the impedance divider formed by $L_1$ and the tank impedance. However, the parameter $K_{supply}$ derived from a full circuit simulation or measurement of $\\frac{df_0}{dV_{out}}$ inherently includes this coupling effect. If calculating analytically from first principles, you would multiply the transfer function from $V_{out}$ to the tank node voltage (determined by $L_1$ and tank impedance) by the modulation sensitivity of the tank nodes.",
        "format": "markdown",
        "sha256": "499aceff8f3de0674ffea82d6a496b286929dff5b140299cafd673ba81f4337a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly uses supply sensitivity and FM-to-PM conversion to obtain the 1/offset-frequency-squared phase-noise relation. It omits the circuit-specific insight that supply noise acts directly on the varactors, making Kpush closely related to KVCO, and adds a likely misleading L1 attenuation/common-mode explanation.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2547,
        "output_tokens": 14436,
        "total_tokens": 16983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2547,
        "output_tokens": 14436,
        "total_tokens": 16983,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12900,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, which is a cross-coupled differential LC oscillator, here is the analysis of what happens when the capacitor $C_T$ is added to the tail node:\n\n**1. Circuit Analysis**\n*   **Virtual Ground:** In a balanced differential oscillator, the oscillation is differential (i.e., $V_X = -V_Y$). The current through the tail current source $I_{SS}$ is constant. Therefore, the AC differential current at the tail node (node P) is zero. This makes the tail node a **virtual ground** for differential signals.\n*   **Frequency Stability:** Because the tail node is a virtual ground for the differential oscillation mode, the capacitor $C_T$ is effectively connected to ground and does not load the differential LC tank (formed by $L_1, L_2$ and the parasitic capacitances at nodes X and Y). Thus, the oscillation frequency and the quality factor ($Q$) of the tank remain largely unchanged.\n\n**2. Noise Mechanism**\n*   **Tail Noise:** The tail current source $I_{SS}$ generates noise (thermal noise and flicker/$1/f$ noise). This noise can be modeled as a noise current source in parallel with the ideal current source.\n*   **Voltage Fluctuation:** Without $C_T$, this noise current flows through the output impedance of the current source (let's call it $R_{SS}$). This creates voltage fluctuations (noise voltage) at the tail node P ($V_{noise} = I_{noise} \\times R_{SS}$).\n*   **Amplitude Modulation (AM):** These voltage fluctuations at the tail node modulate the effective transconductance and the switching behavior of the cross-coupled pair ($M_1, M_2$). In a large-signal oscillator, this primarily causes **Amplitude Modulation (AM)** of the oscillation signal.\n*   **AM-PM Conversion:** Oscillators are non-linear systems. Amplitude variations (AM) are converted into phase variations (PM) through a process called **AM-PM conversion**. This phase modulation manifests as **phase noise**, particularly close to the carrier frequency.\n\n**3. Effect of Adding $C_T$**\n*   **Impedance Reduction:** Adding the capacitor $C_T$ to the tail node creates a low-impedance path to ground for high-frequency signals. The impedance at the tail node becomes the parallel combination of the current source impedance and the capacitor's impedance ($Z_{tail} \\approx R_{SS} \\parallel \\frac{1}{j\\omega C_T}$).\n*   **Reduced Noise Voltage:** At the oscillation frequency and nearby sidebands, the impedance is dominated by the capacitor ($\\frac{1}{\\omega C_T}$), which is much lower than $R_{SS}$. This significantly reduces the voltage noise at the tail node for a given noise current from $I_{SS}$.\n*   **Result:** With less voltage fluctuation at the tail node, the amplitude modulation of the oscillation is reduced. Consequently, the AM-PM conversion is reduced.\n\n**Conclusion**\nThe addition of $C_T$ reduces the modulation of the oscillation amplitude by the tail noise. Therefore, the **phase noise is reduced (improves)**.\n\nIn summary: **The phase noise decreases.**",
        "format": "markdown",
        "sha256": "f5a16012afdff0dcd4274048cc04083591194dcec80093cf517e817564876b1c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT monotonically reduces phase noise by filtering tail-node noise, missing the nonmonotonic effect and the class-C improvement and degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 5946,
        "total_tokens": 8508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 5946,
        "total_tokens": 8508,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5237,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, which is a **cross-coupled LC oscillator**, here is the explanation of what happens when the capacitor $C_T$ is added to the tail node (node P):\n\n**The phase noise is reduced (improved).**\n\nHere is the step-by-step reasoning:\n\n1.  **Ideal vs. Real Tail Node:** In an ideal cross-coupled LC oscillator, the tail node (P) is an **AC ground** for differential signals. This is because the sum of the currents through $M_1$ and $M_2$ is constant ($I_{D1} + I_{D2} = I_{SS}$), so no differential current flows into the tail node. However, in a real circuit, the tail node voltage is not perfectly constant. It has small AC fluctuations due to the finite output impedance of the current source $I_{SS}$ and mismatches between the transistors.\n\n2.  **Source of Phase Noise:** These voltage fluctuations at the tail node ($V_P$) cause the transconductance ($g_m$) of the cross-coupled transistors ($M_1$ and $M_2$) to vary. This time-varying transconductance acts as a mixer. It takes low-frequency noise (such as thermal noise from the tank or **1/f noise** from the transistors) and upconverts it to the oscillation frequency. This upconverted noise manifests as **phase noise** around the carrier frequency.\n\n3.  **Role of $C_T$:** Adding the capacitor $C_T$ at the tail node creates a low-impedance path to ground for AC signals (impedance $Z \\approx 1/j\\omega C_T$). This effectively \"clamps\" the tail node voltage, significantly reducing the AC voltage swing at node P.\n\n4.  **Result:** With a smaller voltage swing at the tail node, the modulation of the transconductance ($g_m$) is minimized. Consequently, the mechanism that upconverts low-frequency noise (especially 1/f noise) to phase noise is suppressed. Therefore, the overall **phase noise of the oscillator is reduced**.\n\nIn summary, $C_T$ acts as a bypass capacitor that stabilizes the tail node voltage, reducing non-linear modulation and improving the phase noise performance.",
        "format": "markdown",
        "sha256": "c1bd148580f605524c2e904a774953cec514bb6d9c350676d4a594bb42ed3f6a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a monotonic phase-noise improvement from filtering the tail node, while the effect is nonmonotonic and includes class-C improvement and possible degradations. The golden solution explicitly assigns this filtering-only conclusion score 1.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 5604,
        "total_tokens": 8166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 5604,
        "total_tokens": 8166,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5111,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit analysis of the differential LC oscillator shown in the figure, here is what happens to the phase noise:\n\n**The phase noise is reduced (improved).**\n\nHere is the detailed explanation:\n\n1.  **Circuit Identification:** The circuit is a differential LC oscillator consisting of a cross-coupled pair of transistors ($M_1, M_2$) and inductive loads ($L_1, L_2$). The node $P$ is the common tail node connected to the current source $I_{SS}$.\n\n2.  **Role of the Tail Node Impedance:** In an ideal differential oscillator, the tail node $P$ acts as a \"virtual ground\" for the differential oscillation signal. However, in reality, noise currents from the tail current source ($I_{SS}$) and the transistors themselves flow into this node. The voltage fluctuation at the tail node, $v_p$, is determined by the noise current multiplied by the impedance at node $P$ ($v_p = i_{noise} \\times Z_P$).\n\n3.  **Effect of $C_T$:**\n    *   Without $C_T$, the impedance at node $P$ is primarily determined by the output impedance of the current source $I_{SS}$, which is typically very high. This high impedance allows noise currents to create significant voltage fluctuations ($v_p$) at the tail node.\n    *   These voltage fluctuations at the tail node modulate the effective gate-source voltages of $M_1$ and $M_2$. This modulation leads to the upconversion of low-frequency noise (like flicker noise) to the carrier frequency, which manifests as increased phase noise.\n    *   By adding the capacitor $C_T$ from the tail node to ground, you create a low-impedance path to ground for high-frequency signals (including the oscillation frequency and noise). The impedance at node $P$ becomes approximately $1/(j\\omega_0 C_T)$ in parallel with the current source impedance.\n    *   This significantly **lowers the impedance** at the tail node at the oscillation frequency.\n\n4.  **Result:** With a lower impedance at the tail node, the voltage fluctuations $v_p$ caused by noise currents are reduced. Since the tail voltage is more stable, there is less modulation of the oscillator's parameters (like transconductance and switching instant). Consequently, the upconversion of noise is suppressed, leading to a **reduction in phase noise**.\n\nNote that $C_T$ does not affect the differential oscillation frequency or the quality factor (Q) of the main LC tank because, for differential signals, the tail node is already a virtual ground, so $C_T$ is effectively connected between virtual ground and real ground (having no effect on the differential mode).",
        "format": "markdown",
        "sha256": "7088af0440de8d77028c7e0dcffa3b3b2fc049b6c5cc6cf8149eb8fe7431b6bd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that CT monotonically improves phase noise by filtering tail-node fluctuations. The key effect is nonmonotonic: class-C switching can improve phase noise, while flicker-noise upconversion, triode operation, or large-CT instability can degrade it.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 4933,
        "total_tokens": 7495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4338,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2562,
        "output_tokens": 4933,
        "total_tokens": 7495,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4338,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an estimation of the oscillation frequency.\n\n**1. Circuit Analysis**\nThe circuit consists of two identical differential amplifier stages connected in a feedback loop.\n*   **Top Stage:** A differential pair (outer NMOS transistors) loaded by inductors (at nodes $X_1, Y_1$) and a cross-coupled pair (inner NMOS transistors) biased by $I_{SS}$. The cross-coupled pair provides negative resistance to sustain oscillation. The outer pair is biased by $I_1$.\n*   **Bottom Stage:** Identical to the top stage, with nodes $X_2, Y_2$, inductors, cross-coupled pair (biased by $I_{SS}$), and outer pair (biased by $I_1$).\n*   **Feedback Connections:** The outputs of the top stage ($X_1, Y_1$) are connected to the inputs of the bottom stage. The outputs of the bottom stage ($X_2, Y_2$) are connected to the inputs of the top stage. This forms a closed-loop feedback system.\n\n**2. Oscillation Condition**\nThis is a **differential LC oscillator** (specifically, a two-stage differential ring oscillator with LC loads).\n*   Each differential stage acts as an inverting amplifier, introducing a phase shift of $180^{\\circ}$ ($\\pi$ radians) at its resonant frequency.\n*   Since there are two stages in the feedback loop, the total phase shift is $180^{\\circ} + 180^{\\circ} = 360^{\\circ}$ (or $0^{\\circ}$). This satisfies the phase condition for oscillation (Barkhausen criterion) at the resonant frequency of the LC tanks.\n\n**3. Frequency Determination**\nThe oscillation frequency is primarily determined by the resonant frequency of the LC tanks formed by the inductors and the parasitic capacitances at the nodes $X_1, Y_1$ (and $X_2, Y_2$).\n*   Let $L$ be the inductance of the coils.\n*   Let $C$ be the total equivalent capacitance at the nodes $X_1, Y_1$ (which includes the parasitic capacitances of the transistors like $C_{gs}, C_{gd}, C_{db}$ and any explicit capacitors).\n\nThe resonant angular frequency $\\omega_0$ is given by:\n$$ \\omega_0 = \\frac{1}{\\sqrt{LC}} $$\n\nThe oscillation frequency $f_{osc}$ is:\n$$ f_{osc} = \\frac{\\omega_0}{2\\pi} = \\frac{1}{2\\pi \\sqrt{LC}} $$\n\n**Role of Currents:**\n*   **$I_{SS}$:** Biases the cross-coupled pair. The transconductance $g_m$ of this pair determines the negative resistance ($R_{neg} \\approx -2/g_m$). This negative resistance cancels the energy loss in the inductor (positive resistance), allowing the oscillation to sustain. It affects the amplitude and start-up condition, but not primarily the frequency.\n*   **$I_1$:** Biases the input differential pair (outer transistors). This determines the gain of the stage. For oscillation to start, the loop gain must be greater than or equal to 1 ($A_{loop} \\ge 1$). This is satisfied if the gain is high enough, but the frequency remains centered around the LC resonance.\n\n**Estimate:**\nThe oscillation frequency is approximately the resonant frequency of the LC tanks:\n\n$$ f_{osc} \\approx \\frac{1}{2\\pi \\sqrt{LC}} $$\n\nwhere $L$ is the inductance and $C$ is the total capacitance at the output nodes.",
        "format": "markdown",
        "sha256": "fa3b384e5b917cc437e5d4922d6da4597ab9eb528db134ccf0df8e1811f9a64c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the LC tank resonance as the baseline, but misses the coupling-induced frequency shift that is central to the estimate and incorrectly suggests the bias currents do not significantly affect frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 8790,
        "total_tokens": 10300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 8790,
        "total_tokens": 10300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an estimation and analysis of the oscillation frequency.\n\n### 1. Circuit Identification\nThe circuit shown is a **two-stage differential LC oscillator** with current commutation (often related to Class-C oscillator topologies). It consists of two identical stages (top and bottom) connected in a feedback loop.\n\n*   **Top Stage:** An LC tank formed by the inductors (connected to the top rail) and the nodes $X_1, Y_1$. It contains a cross-coupled NMOS pair biased by $I_{SS}$ (providing negative resistance to sustain oscillations) and a switching pair biased by $I_1$ (driven by the bottom stage).\n*   **Bottom Stage:** Identical to the top stage, with tank nodes $X_2, Y_2$, cross-coupled pair biased by $I_{SS}$, and switching pair biased by $I_1$ (driven by the top stage).\n*   **Feedback:** The outputs of the top stage ($X_1, Y_1$) drive the inputs (gates) of the bottom stage, and vice-versa. This creates a closed-loop feedback system.\n\n### 2. Oscillation Mechanism\n*   **Phase Condition:** For oscillation to occur, the total phase shift around the feedback loop must be $360^\\circ$ (or $0^\\circ$).\n    *   Each differential stage (top or bottom) acts as an inverting amplifier at the resonant frequency, providing a $180^\\circ$ phase shift.\n    *   Two stages in series provide $180^\\circ + 180^\\circ = 360^\\circ$. Thus, the circuit satisfies the phase condition for oscillation at the resonant frequency of the LC tanks.\n*   **Amplitude Condition:** The cross-coupled pairs (biased by $I_{SS}$) generate a negative resistance ($R_{neg} \\approx -1/g_m$) that cancels the positive resistive losses ($R_p$) of the LC tanks (inductor resistance and parasitic resistance). The condition for oscillation is $|R_{neg}| \\le R_p$, or $g_m \\ge 1/R_p$. The current $I_1$ steers current into the tank, determining the oscillation amplitude (Class-C operation).\n\n### 3. Frequency Estimation\nThe oscillation frequency is primarily determined by the resonant frequency of the LC tanks. Although no explicit capacitors are drawn, there is parasitic capacitance ($C_{par}$) at the nodes $X_1, Y_1$ (and $X_2, Y_2$) due to the transistor drains and interconnects. Let $C$ be the total effective capacitance at these nodes.\n\nThe angular frequency $\\omega_{osc}$ is approximately:\n$$ \\omega_{osc} \\approx \\frac{1}{\\sqrt{LC}} $$\n\nThe oscillation frequency $f_{osc}$ in Hertz is:\n$$ f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}} $$\n\nWhere:\n*   $L$ is the inductance of the coils shown.\n*   $C$ is the total capacitance at the nodes $X_1, Y_1$ (and $X_2, Y_2$), which includes the parasitic capacitances of the transistors and any implicit load capacitance.\n\n### 4. Role of Currents ($I_{SS}$ and $I_1$)\nWhile the frequency is set by $L$ and $C$, the currents play crucial roles in the operation:\n*   **$I_{SS}$ (Tail current for cross-coupled pair):** Determines the transconductance $g_m$ of the negative resistance generator. It must be large enough to overcome tank losses ($g_m \\approx \\sqrt{2\\mu C_{ox} (W/L) I_{SS}} > 1/R_p$). It has a minor effect on frequency due to the non-linear capacitance of the cross-coupled transistors (varactor effect), but primarily sets the start-up condition.\n*   **$I_1$ (Tail current for switching pair):** Determines the amplitude of the current commutated into the tank. In a current-commuting oscillator, the peak voltage swing $V_{peak}$ is approximately given by:\n    $$ V_{peak} \\approx \\frac{I_1}{\\omega_{osc} C} $$\n    This current also affects the frequency slightly due to the charging/discharging dynamics if the Q-factor is not extremely high, but for a high-Q LC tank, the frequency remains close to $1/(2\\pi\\sqrt{LC})$.\n\n**Summary Estimate:**\nThe oscillation frequency is approximately the resonant frequency of the LC tank:\n$$ \\mathbf{f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}} $$\n(where $C$ is the total parasitic capacitance at nodes $X_1, Y_1$).",
        "format": "markdown",
        "sha256": "a9c83068dd452dfffdda92821dbde6cdbd3380bfd5f2bbeabe9477795e592ab1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct uncoupled tank resonance, but misses the central coupling-induced frequency shift, approximately ±αω₀/(2Q). Treating current effects as only minor capacitance or charging dynamics does not capture that mechanism.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 11680,
        "total_tokens": 13190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10584,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 11680,
        "total_tokens": 13190,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10584,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "max",
        "api_model": "qwen/qwen3.7-flash",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Based on the circuit diagram provided, here is an estimation of the oscillation frequency.\n\n**1. Circuit Analysis**\nThe circuit consists of two identical differential amplifier stages (top and bottom blocks) connected in a feedback loop.\n*   **Top Block:** Takes inputs from the bottom block (nodes $X_2, Y_2$) and produces outputs at nodes $X_1, Y_1$. It features inductive loads (coils) connected to the supply rail, cross-coupled transistors (for negative resistance/oscillation support), and differential input transistors.\n*   **Bottom Block:** Takes inputs from the top block (nodes $X_1, Y_1$) and produces outputs at nodes $X_2, Y_2$. It is structurally identical to the top block.\n*   **Feedback:** The outputs $X_1, Y_1$ are fed back to the inputs of the bottom block, and outputs $X_2, Y_2$ are fed back to the inputs of the top block. This forms a two-stage differential ring oscillator with LC loads.\n\n**2. Oscillation Condition**\nFor oscillation to occur, the total phase shift around the loop must be $0^\\circ$ or $360^\\circ$ (Barkhausen criterion), and the loop gain must be at least unity.\n*   Each differential stage with an LC tank load acts as an inverting amplifier at the resonant frequency, providing a phase shift of $180^\\circ$.\n*   With two stages in the loop, the total phase shift is $180^\\circ + 180^\\circ = 360^\\circ$ (or $0^\\circ$). This satisfies the phase condition for oscillation.\n*   The cross-coupled transistor pairs (the central NMOS pairs in each block) provide negative resistance ($R_{neg} \\approx -2/g_m$) to cancel the energy losses in the LC tanks (inductor resistance and parasitic resistance), ensuring the loop gain is $\\ge 1$.\n\n**3. Frequency Estimation**\nThe oscillation frequency is determined by the resonant frequency of the LC tanks formed by the inductors ($L$) and the parasitic capacitances ($C$) at the output nodes ($X_1, Y_1, X_2, Y_2$). The parasitic capacitances include the gate-drain, drain-source, and substrate capacitances of the transistors, as well as any stray capacitance.\n\nThe resonant angular frequency $\\omega_0$ is given by:\n$$ \\omega_0 = \\frac{1}{\\sqrt{LC}} $$\n\nTherefore, the oscillation frequency $f$ is estimated as:\n$$ f \\approx \\frac{1}{2\\pi\\sqrt{LC}} $$\n\nWhere:\n*   $L$ is the inductance of the coils (inductors).\n*   $C$ is the total effective capacitance at the output nodes (primarily parasitic capacitance of the transistors).\n\n**Note:** The bias currents $I_{SS}$ and $I_1$ determine the transconductance ($g_m$) of the transistors, which affects the loop gain (amplitude condition for oscillation) but has a minimal effect on the frequency itself, assuming high Q-factor tanks. The frequency is primarily set by the passive components $L$ and $C$.\n\n**Final Estimate:**\n$$ f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}} $$",
        "format": "markdown",
        "sha256": "12bbc9f5029989af3ea87e5f54ce42e7096b45d241c78a59f1e85ae3180bb5a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly gives the LC tank resonance, but omits the coupling-induced frequency shift that is essential to the estimate and incorrectly treats bias-dependent coupling as having minimal frequency effect.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 9776,
        "total_tokens": 11286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9013,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1510,
        "output_tokens": 9776,
        "total_tokens": 11286,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9013,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
