{
  "model_key": "qwen_38_27b",
  "display_name": "Qwen 3.8 27B",
  "provider": "qwen",
  "evaluation_model_ids": [],
  "thinking_effort": "xhigh",
  "configuration_note": "Self-hosted official BF16 checkpoint (Qwen/Qwen3.8-27B, revision 8c0b3d30) on vLLM 0.33.0 with the qwen3 reasoning parser. Qwen 3.8 27B answered the 50 tasks in three rollouts at reasoning effort xhigh, the highest its chat template accepts, with Qwen's recommended thinking-mode sampling (temperature 1.0, top_p 0.95), and no max_tokens, so the server allowed the 262,144-token context less the prompt. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. The checkpoint is self-hosted; like every other entry, its cost uses OpenRouter's list price for Qwen 3.8 27B on 2026-11-10 ($0.15 input, $0.0375 cached input, $1.875 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 78,
          "incorrect_count": 72,
          "partial_credit_count": 55,
          "zero_count": 17,
          "mean_score_0_to_4": 2.68,
          "score_percent": 67.0,
          "score_distribution": {
            "0": 17,
            "1": 27,
            "2": 21,
            "3": 7,
            "4": 78
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 78,
          "incorrect_count": 72,
          "partial_credit_count": 55,
          "zero_count": 17,
          "mean_score_0_to_4": 2.68,
          "score_percent": 67.0,
          "score_distribution": {
            "0": 17,
            "1": 27,
            "2": 21,
            "3": 7,
            "4": 78
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 64,
          "incorrect_count": 26,
          "partial_credit_count": 13,
          "zero_count": 13,
          "mean_score_0_to_4": 3.1444444444444444,
          "score_percent": 78.61111111111111,
          "score_distribution": {
            "0": 13,
            "1": 3,
            "2": 6,
            "3": 4,
            "4": 64
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 64,
          "incorrect_count": 26,
          "partial_credit_count": 13,
          "zero_count": 13,
          "mean_score_0_to_4": 3.1444444444444444,
          "score_percent": 78.61111111111111,
          "score_distribution": {
            "0": 13,
            "1": 3,
            "2": 6,
            "3": 4,
            "4": 64
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 14,
          "incorrect_count": 46,
          "partial_credit_count": 42,
          "zero_count": 4,
          "mean_score_0_to_4": 1.9833333333333334,
          "score_percent": 49.583333333333336,
          "score_distribution": {
            "0": 4,
            "1": 24,
            "2": 15,
            "3": 3,
            "4": 14
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 14,
          "incorrect_count": 46,
          "partial_credit_count": 42,
          "zero_count": 4,
          "mean_score_0_to_4": 1.9833333333333334,
          "score_percent": 49.583333333333336,
          "score_distribution": {
            "0": 4,
            "1": 24,
            "2": 15,
            "3": 3,
            "4": 14
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 27,
        "incorrect_count": 23,
        "partial_credit_count": 18,
        "zero_count": 5,
        "mean_score_0_to_4": 2.72,
        "score_percent": 68.0,
        "score_distribution": {
          "0": 5,
          "1": 10,
          "2": 6,
          "3": 2,
          "4": 27
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 24,
        "incorrect_count": 26,
        "partial_credit_count": 19,
        "zero_count": 7,
        "mean_score_0_to_4": 2.58,
        "score_percent": 64.5,
        "score_distribution": {
          "0": 7,
          "1": 8,
          "2": 8,
          "3": 3,
          "4": 24
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 27,
        "incorrect_count": 23,
        "partial_credit_count": 18,
        "zero_count": 5,
        "mean_score_0_to_4": 2.74,
        "score_percent": 68.5,
        "score_distribution": {
          "0": 5,
          "1": 9,
          "2": 7,
          "3": 2,
          "4": 27
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 66560,
        "input_tokens": 230382,
        "output_tokens": 1921333,
        "total_tokens": 2151715
      },
      "known_totals": {
        "cached_input_tokens": 66560,
        "input_tokens": 230382,
        "output_tokens": 1921333,
        "total_tokens": 2151715
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 22,
          "incorrect_count": 8,
          "partial_credit_count": 4,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2333333333333334,
          "score_percent": 80.83333333333333,
          "score_distribution": {
            "0": 4,
            "2": 3,
            "3": 1,
            "4": 22
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 19,
          "incorrect_count": 11,
          "partial_credit_count": 6,
          "zero_count": 5,
          "mean_score_0_to_4": 2.966666666666667,
          "score_percent": 74.16666666666667,
          "score_distribution": {
            "0": 5,
            "1": 1,
            "2": 3,
            "3": 2,
            "4": 19
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 23,
          "incorrect_count": 7,
          "partial_credit_count": 3,
          "zero_count": 4,
          "mean_score_0_to_4": 3.2333333333333334,
          "score_percent": 80.83333333333333,
          "score_distribution": {
            "0": 4,
            "1": 2,
            "3": 1,
            "4": 23
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 14,
          "zero_count": 1,
          "mean_score_0_to_4": 1.95,
          "score_percent": 48.75,
          "score_distribution": {
            "0": 1,
            "1": 10,
            "2": 3,
            "3": 1,
            "4": 5
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 5,
          "incorrect_count": 15,
          "partial_credit_count": 13,
          "zero_count": 2,
          "mean_score_0_to_4": 2.0,
          "score_percent": 50.0,
          "score_distribution": {
            "0": 2,
            "1": 7,
            "2": 5,
            "3": 1,
            "4": 5
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 4,
          "incorrect_count": 16,
          "partial_credit_count": 15,
          "zero_count": 1,
          "mean_score_0_to_4": 2.0,
          "score_percent": 50.0,
          "score_distribution": {
            "0": 1,
            "1": 7,
            "2": 7,
            "3": 1,
            "4": 4
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "Assuming ideal long-channel behavior and the same bias point:\n\n\\[\nA_{\\text{intrinsic}}=\\frac{g_m}{g_{ds}}\n\\]\n\n- \\(g_m \\propto W/L\\)\n- \\(g_{ds} \\propto W/L^2\\) because channel-length modulation decreases with longer \\(L\\)\n\nIf both \\(W\\) and \\(L\\) are doubled, \\(W/L\\) stays the same, so \\(g_m\\) stays the same, while \\(g_{ds}\\) is halved. Therefore:\n\n\\[\n\\boxed{\\text{The intrinsic gain doubles.}}\n\\]\n\nThis is mainly due to the longer channel, not the wider channel.",
        "format": "markdown",
        "sha256": "c7a6d01b927a21aa9e7da9359fb113bb50c061720d8dd2b82d8147ba97727e3f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain doubles: with fixed overdrive, doubling both dimensions leaves gm and drain current approximately unchanged, while the longer channel halves gds (doubles ro).",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 1608,
        "total_tokens": 1680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 1608,
        "total_tokens": 1680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1457,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "Assuming a long-channel MOSFET in saturation and fixed bias/overdrive voltage, **its intrinsic gain doubles**.\n\nIntrinsic gain is\n\n\\[\nA_{\\text{int}} = g_m r_o\n\\]\n\nFor a long-channel MOSFET:\n\n\\[\nI_D \\propto \\frac{W}{L}\n\\]\n\nso doubling both \\(W\\) and \\(L\\) leaves \\(W/L\\) unchanged, hence \\(g_m\\) stays about the same.\n\nBut channel-length modulation scales roughly as\n\n\\[\n\\lambda \\propto \\frac{1}{L}\n\\]\n\nso\n\n\\[\nr_o = \\frac{1}{\\lambda I_D}\n\\]\n\ndoubles when \\(L\\) doubles.\n\nTherefore:\n\n\\[\nA_{\\text{int}} \\propto L\n\\]\n\nDoubling \\(L\\) while also doubling \\(W\\) gives:\n\n\\[\nA_{\\text{int,new}} = 2 A_{\\text{int,old}}\n\\]\n\nSo the intrinsic gain increases by a factor of 2, i.e. about **+6 dB**.",
        "format": "markdown",
        "sha256": "19901872e04d4a433ccbbd330a810571468b9503de3cf211afad39e7f0870cf8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that, at fixed overdrive in saturation, doubling both dimensions leaves gm and ID approximately unchanged while reducing lambda and doubling ro, so intrinsic gain approximately doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 2456,
        "total_tokens": 2528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 2456,
        "total_tokens": 2528,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "It will **increase by about a factor of 2** in the usual long-channel MOSFET model.\n\nThe intrinsic gain is\n\n\\[\nA_{\\text{int}} = g_m r_o\n\\]\n\nFor a MOSFET in saturation:\n\n\\[\ng_m \\propto \\frac{W}{L}V_{OV}\n\\]\n\nand\n\n\\[\nr_o \\approx \\frac{1}{\\lambda I_D}\n\\]\n\nwith channel-length modulation usually scaling as\n\n\\[\n\\lambda \\propto \\frac{1}{L}\n\\]\n\nso\n\n\\[\nr_o \\propto L\n\\]\n\nIf you **double both \\(W\\) and \\(L\\)**:\n\n- \\(W/L\\) stays the same, so \\(g_m\\) is unchanged for the same bias.\n- \\(r_o\\) doubles because \\(L\\) doubles.\n\nTherefore:\n\n\\[\nA_{\\text{int}} = g_m r_o\n\\]\n\nalso **doubles**.\n\nCaveat: this assumes long-channel behavior and fixed bias/overdrive. In short-channel devices, DIBL, velocity saturation, and parasitics can make the scaling less ideal.",
        "format": "markdown",
        "sha256": "3f608828abd0fd75f54a682c44a213cd2ecb3309652600997b54a7d707b3b982"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions leaves W/L, gm, and approximately ID unchanged, while the longer channel roughly doubles ro and intrinsic gain. The stated fixed-overdrive/long-channel caveat is appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 4594,
        "total_tokens": 4666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 4594,
        "total_tokens": 4666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4336,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "It depends on what is held constant.\n\nFor a MOSFET in saturation, ignoring channel-length modulation:\n\n\\[\nI_D = \\frac{1}{2}k\\,V_{OV}^2\n\\]\n\nwhere \\(V_{OV}=V_{GS}-V_{th}\\). The transconductance is\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k V_{OV} = \\frac{2I_D}{V_{OV}}\n\\]\n\nSo:\n\n- **For the same MOSFET** with fixed \\(W/L\\), increasing the overdrive voltage increases \\(g_m\\).  \n  **Student A is correct** in that common sense.\n\n- **If the drain current is held constant**, then from \\(g_m = 2I_D/V_{OV}\\), a larger overdrive voltage gives a smaller \\(g_m\\).  \n  **Student B is correct** in that design comparison.\n\nSo the best answer is: **A is correct for a given transistor as its bias changes; B is correct only when comparing bias points or devices with the same drain current.**",
        "format": "markdown",
        "sha256": "d58992979fb40f2488888ecf8ef320111645fa3bd3e8c20e9cb4a9841b3a1927"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed W/L, derives gm increasing with VOV, and explains that Student B's result applies when ID is held constant.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 84,
        "output_tokens": 3255,
        "total_tokens": 3339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3011,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 84,
        "output_tokens": 3255,
        "total_tokens": 3339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3011,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "Student **A** is correct, under the usual MOSFET saturation/square-law model.\n\nFor a MOSFET in saturation:\n\n\\[\nI_D=\\frac{1}{2}k_{n'}\\frac{W}{L}(V_{GS}-V_t)^2\n\\]\n\nwhere the overdrive voltage is\n\n\\[\nV_{OV}=V_{GS}-V_t\n\\]\n\nTransconductance is:\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n\\]\n\nSo:\n\n\\[\ng_m = k_{n'}\\frac{W}{L}V_{OV}\n\\]\n\nThus, as the overdrive voltage increases, **transconductance increases linearly** in the ideal square-law region.\n\nA common source of confusion is the equivalent expression:\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nThis might suggest that \\(g_m\\) decreases as \\(V_{OV}\\) increases, but that only applies if \\(I_D\\) is held fixed. In reality, increasing \\(V_{OV}\\) also increases \\(I_D\\), and the net result is that \\(g_m\\) increases.",
        "format": "markdown",
        "sha256": "c677321ae2a728880290e4bd65915fb922829b926b20964626ddeb915d5e3832"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for fixed device size and derives that gm increases linearly with overdrive; it also explains why the fixed-current interpretation of 2ID/VOV does not apply.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 84,
        "output_tokens": 903,
        "total_tokens": 987,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 644,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 84,
        "output_tokens": 903,
        "total_tokens": 987,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 644,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "Student **A** is correct, under the usual MOSFET saturation-region model.\n\nFor a long-channel MOSFET in saturation:\n\n\\[\nI_D = \\frac{1}{2} k (V_{GS}-V_{th})^2\n\\]\n\nwhere the overdrive voltage is\n\n\\[\nV_{OV} = V_{GS}-V_{th}\n\\]\n\nThe transconductance is\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}} = k V_{OV}\n\\]\n\nSo as the overdrive voltage \\(V_{OV}\\) increases, \\(g_m\\) increases.\n\nA small caveat: in short-channel devices or with velocity saturation, \\(g_m\\) may eventually flatten out, but in the standard textbook saturation model, **Student A is correct**.",
        "format": "markdown",
        "sha256": "b268fbfe2829427809cabb8c65c9810d5af7aec3d97f427a8fee42fb7783b9c7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A and derives that, for a fixed device in the long-channel saturation model, gm = kVOV increases with overdrive voltage.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 84,
        "output_tokens": 742,
        "total_tokens": 826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 84,
        "output_tokens": 742,
        "total_tokens": 826,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 564,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "Essentially **yes**—the AC small-signal model of a PMOS device has the same structure as that of an NMOS device. The difference is mainly in **bias polarity/sign conventions**.\n\nFor both NMOS and PMOS, the low-frequency small-signal model includes:\n\n- a voltage-controlled current source: \\(g_m v_{gs}\\)\n- an output resistance: \\(r_o\\)\n- gate capacitances: \\(C_{gs}, C_{gd}\\), etc.\n- optionally a body-effect source: \\(g_{mb}v_{bs}\\)\n\nSo the small-signal equation is commonly written as:\n\n\\[\ni_d \\approx g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nfor both devices, if you use consistent terminal voltage/current reference directions and take \\(g_m\\) as a positive magnitude.\n\nThe caveat:\n\n- A PMOS is biased with opposite polarity: \\(V_{GS}\\) and \\(V_{DS}\\) are usually negative when the source is at the higher potential.\n- Conventional DC current in a PMOS flows from source to drain, opposite to an NMOS.\n- If you define the PMOS current in its “natural” source-to-drain direction, or use \\(v_{sg}\\) instead of \\(v_{gs}\\), the dependent current source appears reversed or gets a minus sign:\n\n\\[\ni_{sd} = g_m v_{sg} = -g_m v_{gs}\n\\]\n\nSo the model is **identical in topology and small-signal behavior**, but you must be careful with polarities and current-direction conventions.",
        "format": "markdown",
        "sha256": "96c282dd057c7d89b79ce7bbc7a99cbc3c5af3bee5ea09b0fed1fdce3de2f1dc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same structure as the NMOS model, with polarity and sign conventions handled consistently.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 6083,
        "total_tokens": 6155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 6083,
        "total_tokens": 6155,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "Short answer: **structurally yes, but not literally if you keep the same voltage/current polarities as an NMOS model.**\n\nA PMOS small-signal model has the same **elements** as an NMOS model:\n\n- a gate-controlled current source,\n- a drain–source output resistance \\(r_o\\),\n- and, if included, a body-effect controlled source.\n\nThe difference is **polarity and current direction**.\n\nFor an NMOS, using the common convention where the small-signal drain current is taken in the direction **drain to source**,\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nFor a PMOS, the device is normally controlled by a positive **source-to-gate** overdrive voltage, and its conventional current flows **source to drain**. A common PMOS form is\n\n\\[\ni_{sd} = g_m v_{sg} + \\frac{v_{sd}}{r_o}\n\\]\n\nwhere\n\n\\[\nv_{sg} = -v_{gs}, \\qquad v_{sd} = -v_{ds}\n\\]\n\nand \\(i_{sd}\\) is the small-signal current from source to drain.\n\nSo if you express the PMOS model using the same \\(v_{gs}\\), \\(v_{ds}\\), and current direction as an NMOS model, you may need to reverse the controlled-source arrow or add minus signs. In practice, many analyses treat the PMOS small-signal model as “the same as the NMOS model” **provided the polarities are handled consistently**.",
        "format": "markdown",
        "sha256": "369e2eb316e3a357fa8a886b81b5cb4a1b28fdef801527e1324cc502cc307ced"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS model is structurally the same as the NMOS model, with polarity and current-direction conventions handled consistently.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 9544,
        "total_tokens": 9616,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 9544,
        "total_tokens": 9616,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9196,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "In **structure/equation form, yes**—the PMOS small-signal model is the same type of model as the NMOS model.  \nBut **as a drawn schematic with usual polarity conventions, it appears reversed** because a PMOS conducts with opposite DC polarities.\n\nFor a MOSFET in saturation, ignoring body effect and capacitances:\n\n### NMOS\nUsing the usual NMOS variables:\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nThe dependent current source is normally drawn from **drain to source** and is controlled by \\(v_{gs}\\).\n\n---\n\n### PMOS\nUsing the usual PMOS variables:\n\n\\[\ni_{sd} = g_m v_{sg} + \\frac{v_{sd}}{r_o}\n\\]\n\nThe dependent current source is normally drawn from **source to drain** and is controlled by \\(v_{sg}\\), not \\(v_{gs}\\).\n\nSince\n\n\\[\nv_{sg} = -v_{gs}, \\qquad v_{sd} = -v_{ds}, \\qquad i_d = -i_{sd}\n\\]\n\nthe PMOS equation can also be written as\n\n\\[\ni_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nif you use the same terminal voltage/current sign conventions as for the NMOS.\n\nSo:\n\n- **Mathematically/topologically:** the small-signal model is identical.\n- **Schematically in the usual PMOS orientation:** the controlled current source and voltage polarity are reversed.\n- **Parameter values differ:** \\(g_m\\), \\(r_o\\), capacitances, threshold voltage, mobility, etc. depend on the PMOS device parameters, such as \\(\\mu_p\\) and \\(|V_{tp}|\\).",
        "format": "markdown",
        "sha256": "0c45f0c05cb84f8b25ba32bc22a12ba60f2cf3fc2196fe456d20f13b120b7b60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model is the same in form as the NMOS model, with polarity and current-direction conventions reversed.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 7710,
        "total_tokens": 7782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 72,
        "output_tokens": 7710,
        "total_tokens": 7782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7306,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Identifying the configuration\n\nTrace the three terminals of M₁:\n\n* **Source** – bottom terminal (arrow), tied to ground → $V_S = 0$\n* **Drain** – top terminal, tied to the node that the voltage source $V_x$ drives → $V_D = V_x$\n* **Gate** – the left plate; its wire loops up and over to the *same* top node → $V_G = V_x$\n\nSo $V_{GS} = V_{DS} = V_x$. Because $V_{DS} = V_{GS} \\ge V_{GS}-V_{th}$, a diode‑connected MOSFET is **always in saturation** whenever it is on. There is no triode region.\n\nKCL at the top node (gate current = 0): the current delivered by the source, $I_x$, all flows into the drain:\n\n$$\nI_x = I_D =\n\\begin{cases}\n0, & V_x \\le V_{th}\\\\[4pt]\n\\dfrac{1}{2}\\,k\\,(V_x - V_{th})^2, & V_x > V_{th}\n\\end{cases}\n\\qquad k = \\mu_n C_{ox}\\dfrac{W}{L}\n$$\n\n(ignoring channel‑length modulation).\n\n## Sketch of $I_x$ vs $V_x$\n\nFlat at zero up to $V_{th}$, then a **parabola** opening upward, starting from the origin point $(V_{th},\\,0)$.\n\n```\n  Ix\n   |\n   |                              *\n   |                         *\n   |                    *\n   |               *\n   |          *\n   |     *\n   |  *\n   |*\n---+------------------------------------> Vx\n   |        Vth\n   |<-------.\n  (0 = flat for Vx < Vth)\n```\n\n**Key features to mark on your sketch**\n\n* $I_x = 0$ for $V_x \\le V_{th}$ (device in cutoff; the curve lies on the horizontal axis).\n* The curve leaves the axis at $V_x = V_{th}$ with **zero slope** (since $dI_x/dV_x = k(V_x-V_{th}) = 0$ there).\n* For $V_x > V_{th}$ it rises as a **square law** (concave‑up parabola), not a straight line — the giveaway that M₁ is diode‑connected and stuck in saturation.\n\nThat single parabola (with the flat cutoff tail) is the complete $I_x$–$V_x$ characteristic of this circuit.",
        "format": "markdown",
        "sha256": "0e7359c6aaa6dcf3a30b83c7cb1a67c53b4f5ccfc79db91afb2eb1e3de922b9f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives approximately zero current up to threshold followed by a quadratic rise in saturation, matching the full-credit rule.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 989,
        "output_tokens": 2888,
        "total_tokens": 3877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 989,
        "output_tokens": 2888,
        "total_tokens": 3877,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2298,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit interpretation\n\nLook at how M₁ is wired:\n\n* Source → ground (0 V)\n* Gate → tied to the drain (the dot node)\n* Drain → connected, through the branch carrying I_X, to the \"+\" terminal of V_X (whose \"–\" terminal is ground)\n\nBecause the gate wire carries **no** DC current, KCL at the gate‑drain node gives\n\n$$I_X = I_D$$\n\nand because that same node is the top of the ideal voltage source,\n\n$$V_D = V_G = V_X \\quad\\Rightarrow\\quad V_{GS}=V_{DS}=V_X$$\n\nSo M₁ is **diode‑connected** (gate shorted to drain).\n\n## Operating region\n\n* $V_X \\le V_{th}$  →  $V_{GS}\\le V_{th}$  →  transistor **OFF**, $I_D=0$, so $I_X=0$.\n* $V_X > V_{th}$   →  saturation test: $V_{DS} \\ge V_{GS}-V_{th}\\;\\Rightarrow\\;V_{GS}\\ge V_{GS}-V_{th}\\;\\Rightarrow\\;V_{th}\\ge 0$ ✓.\n  Hence the device is **always in saturation** whenever it is on (it can never enter triode).\n\n## I–V relation\n\nIgnoring channel‑length modulation:\n\n$$\\boxed{\\,I_X = \\begin{cases} 0, & V_X \\le V_{th}\\\\[4pt] \\dfrac{1}{2}\\,\\mu_n C_{ox}\\dfrac{W}{L}\\,(V_X - V_{th})^2, & V_X > V_{th}\\end{cases}}$$\n\n(With CLM: multiply the second line by $(1+\\lambda V_X)$, making the curve rise a little faster.)\n\n## Sketch of $I_X$ vs $V_X$\n\nFlat on the axis up to the threshold voltage, then a **square‑law (parabolic) rise** with increasing slope — the classic diode‑connected MOSFET characteristic.\n\n```\n  I_X\n   ^\n   |                              /\n   |                            /\n   |                          /\n   |                        /\n   |                      /\n   |                    /\n   |                  /\n   |                /\n   |              /\n   |            /\n   |          /\n   |        /\n   |_______/________________________>  V_X\n   |<----->|\n   0      V_th\n  (I_X = 0 in this region)\n```\n\n**Key features to show on your sketch:**\n1. The curve lies on the $V_X$ axis (zero current) for $V_X \\le V_{th}$ — there is a \"knee\" at $V_X = V_{th}$.\n2. For $V_X > V_{th}$ it is an upward‑opening parabola (vertex at $(V_{th},0)$), i.e. the slope $\\frac{dI_X}{dV_X}$ increases with $V_X$.\n3. No negative‑current or triode \"fold‑back\" — the diode connection guarantees monotonic conduction into saturation only.\n\nSo the $I_X$–$V_X$ plot is exactly the I–D (drain) characteristic of a diode‑connected NMOS: zero below threshold, quadratic above it.",
        "format": "markdown",
        "sha256": "874d0b7a66ee948f700d827fc42a34762b7cf5dbfae7eea4a04d9ed46526f3ba"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives zero current up to threshold followed by a quadratic rise in saturation. This matches the golden solution’s full-credit rule; the negative-voltage caveat is not required.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 989,
        "output_tokens": 2597,
        "total_tokens": 3586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 989,
        "output_tokens": 2597,
        "total_tokens": 3586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1853,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Identifying the configuration\n\nTrace the connections of M1:\n\n* **Gate** is tied (through the top wire) to the **top terminal** of the device, which is also the node that the voltage source $V_X$ and the current arrow $I_X$ connect to.\n* **Bottom terminal** is tied to ground.\n* **Body/substrate** arrow is at the lowest potential (ground).\n\nSo the gate and the drain are shorted together, the source is at ground, and the body is at ground. This is a **diode‑connected NMOS**:\n\n$$V_{GS} = V_X,\\qquad V_{DS} = V_X,\\qquad V_{SB} = 0$$\n\nBecause the gate current is zero, all of $I_X$ must enter the drain:\n\n$$I_X = I_D$$\n\n## Which region?\n\nThe saturation condition is $V_{DS} \\ge V_{GS}-V_{th}$, i.e. $V_X \\ge V_X - V_{th}$, which is **always true** ($V_{th}>0$). Therefore a diode‑connected MOSFET can never be in triode — it is either **OFF** or in **saturation**.\n\n* **$V_X < V_{th}$** (cutoff):  $I_X = 0$\n* **$V_X > V_{th}$** (saturation):  $I_X = \\dfrac{k_n}{2}\\,(V_X - V_{th})^2,\\quad k_n = \\mu_n C_{ox}\\dfrac{W}{L}$\n\n(With channel‑length modulation the curve is multiplied by $(1+\\lambda V_X)$ and becomes slightly steeper, but the square‑law shape is unchanged.)\n\n## Sketch of $I_X$ vs $V_X$\n\nThe plot is flat at zero up to $V_{th}$, then leaves $V_{th}$ with **zero slope** and rises **convexly** (square law):\n\n```\n I_X\n  |                              .-'''\n  |                           .-''\n  |                        .-''\n  |                     .-''\n  |                  .-''\n  |               .-''\n  |            .-''\n  |         .-''\n  |      .-''\n  |____.-''__________________________________  V_X\n       0        V_th\n```\n\n* Horizontal segment on the axis from $0$ to $V_{th}$ (transistor off).\n* Parabolic rise for $V_X > V_{th}$, $I_X = \\tfrac{k_n}{2}(V_X-V_{th})^2$.\n\n**Notes / assumptions**\n\n* $V_{SB}=0$ is assumed (body tied to source = ground), so no body effect.\n* The sketch is for $V_X \\ge 0$; for $V_X<0$ the drain–body p‑n junction would forward‑conduct, which is outside the MOSFET model being plotted.\n* The key takeaway: a diode‑connected MOSFET looks like a **non‑linear (square‑law) resistor** that is \"dead\" below $V_{th}$ and never enters triode.",
        "format": "markdown",
        "sha256": "ab0ba15f0acce1f8815ff8fb4256131614f554d5f20b12a3364b5848e4bb8157"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS and gives the required near-zero current up to threshold and quadratic rise above it. The saturation reasoning and added nonideal/negative-voltage notes are consistent with the golden solution.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 989,
        "output_tokens": 3554,
        "total_tokens": 4543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 989,
        "output_tokens": 3554,
        "total_tokens": 4543,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2851,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Identifying the operating point\n\n* M₁ is an **NMOS** with its source (and bulk) tied to ground, so $V_{GS}=V_X$ and $V_{SB}=0$.\n* The drain is connected to the **1 V** source, so $V_{DS}=1\\text{ V}$ (fixed).\n* $I_X$ (in the direction of the arrow, i.e. from the 1‑V supply into the drain) is just the drain current $I_D$.\n\nBecause $V_{DS}$ is held constant at 1 V while $V_{GS}=V_X$ is swept, $I_X$ vs $V_X$ is the **transfer characteristic at $V_{DS}=1$ V** (ignoring channel‑length modulation; with $\\lambda$ the saturation branch is slightly tilted).\n\n## Piece‑wise expression\n\nLet $k_n=\\mu_n C_{ox}\\dfrac{W}{L}$ and $V_t$ the threshold voltage.\n\n| Region | Condition | $I_X$ |\n|---|---|---|\n| Cutoff | $V_X < V_t$ | $0$ |\n| Saturation | $V_t < V_X < V_t+1$ | $\\tfrac{1}{2}\\,k_n\\,(V_X-V_t)^2$ |\n| Triode | $V_X > V_t+1$ | $k_n\\big[(V_X-V_t)\\cdot 1-\\tfrac{1}{2}(1)^2\\big]=k_n(V_X-V_t)-\\tfrac{k_n}{2}$ |\n\nThe two expressions are continuous **and** have equal slope at $V_X=V_t+1$ (slope $=k_n$), so the curve is smooth.\n\n## Sketch\n\n```\n I_X\n  ^\n  |                              /   triode:  I_X = k_n(V_X-V_t) - k_n/2\n  |                            /      (straight line, slope k_n)\n  |                          /\n  |                        .        saturation:  I_X = ½ k_n (V_X-V_t)²\n  |                      .           (parabola, slope grows 0 → k_n)\n  |                    .\n  |                  .\n  |                .\n  |              .\n  |            .\n  |          .\n  |________.__________________________  > V_X\n           V_t        V_t + 1\n        cutoff |  saturation | triode\n```\n\n**How to read the sketch**\n\n* For $V_X < V_t$: $I_X = 0$ (flat on the axis).\n* From $V_t$ to $V_t+1$: a **parabola** starting with zero slope and curving upward (concave up).\n* Beyond $V_t+1$: a **straight line** whose slope equals the parabola's slope at the junction, so the transition is tangent (no kink).\n\n> **Sign note:** if the arrow of $I_X$ in your copy is taken in the opposite sense (out of the drain toward the supply), the same curve is obtained reflected about the horizontal axis (i.e. negative values), since physically the current then flows from the 1‑V supply *into* the device. The shape and the break points $V_t$ and $V_t+1$ are unchanged.",
        "format": "markdown",
        "sha256": "997969953f8c347eaf41342bc8a8ca30b7bcad0cff2ea6b66e1939673b048b71"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the required quadratic rise up to Vt + 1 V followed by a roughly linear rise. The equations and transition are consistent with the stated assumptions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1146,
        "output_tokens": 5791,
        "total_tokens": 6937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1146,
        "output_tokens": 5791,
        "total_tokens": 6937,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5056,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit interpretation\n\n* Gate of M₁ is driven by the source $V_X$ (‑ terminal grounded)  →  $V_{GS}=V_X$.\n* Source of M₁ is grounded  →  $V_S=0$.\n* The drain is tied **directly** to the + terminal of the 1‑V ideal source (‑ terminal grounded). There is no series resistance, so the drain is clamped:\n$$V_D = 1\\ \\text{V}\\quad\\Rightarrow\\quad V_{DS}=1\\ \\text{V}\\ \\ (\\text{constant, independent of }V_X)$$\n\nSo $V_X$ only changes $V_{GS}$, while $V_{DS}$ stays at 1 V. That single fact fixes the shape of the curve: as $V_X$ rises the device moves **cutoff → saturation → triode**.\n\n**Polarity of $I_X$.** The arrow for $I_X$ points from the drain node *into* the 1‑V source, i.e. opposite to the conventional drain current $I_D$ (physical current is pushed by the 1‑V source into the drain and down through M₁). Hence\n\n$$I_X = -I_D .$$\n\n(If your course defines $I_X$ as the current *entering* the drain, reflect the sketch below about the horizontal axis – the shape and the break‑points are unchanged.)\n\n## Operating regions (long‑channel, $\\lambda=0$, $k_n=\\mu_nC_{ox}\\,W/L$)\n\n| Region | Condition on $V_X$ | $I_D$ | $I_X=-I_D$ |\n|---|---|---|---|\n| Cutoff | $V_X\\le V_t$ | $0$ | $0$ |\n| Saturation | $V_t< V_X \\le V_t+1$ | $\\tfrac{k_n}{2}(V_X-V_t)^2$ | $-\\tfrac{k_n}{2}(V_X-V_t)^2$ |\n| Triode | $V_X> V_t+1$ | $k_n[(V_X-V_t)\\cdot1-1^2/2]=k_n(V_X-V_t-0.5)$ | $-k_n(V_X-V_t-0.5)$ |\n\nSaturation↔triode boundary: $V_{DS}=V_{GS}-V_t \\Rightarrow 1=V_X-V_t \\Rightarrow V_X=V_t+1$.\nAt that point both formulas give $I_X=-k_n/2$ with slope $-k_n$, so the curve is continuous and smooth (zero slope at $V_X=V_t$).\n\n## Sketch of $I_X$ vs $V_X$\n\n```\n  I_X\n   0 |===========================\\\n     |                           \\\n     |                            \\        (cutoff : I_X = 0)\n     |                             \\\n     |                              \\      (saturation : parabolic)\n     |                               \\\n     |                                \\____    (triode : straight line)\n     |\n     +----------------+----------------+------------------>  V_X\n                      V_t              V_t + 1\n                      (turn‑on)        (sat → triode)\n```\n\nReading the sketch:\n\n* **$V_X < V_t$:** $I_X=0$ (horizontal line on the axis).\n* **$V_t < V_X < V_t+1$:** curve leaves the axis with **zero slope** and bends downward as a **parabola** (saturation, $I_X\\propto-(V_X-V_t)^2$).\n* **$V_X > V_t+1$:** curve becomes a **straight line** of constant slope $-k_n$ (triode), joining smoothly at $V_X=V_t+1$ where $I_X=-k_n/2$.\n\nIf you use the opposite current convention ($I_X=+I_D$), the same picture appears in the positive half‑plane: flat zero up to $V_t$, then an upward parabola until $V_t+1$, then an upward straight line of slope $+k_n$.\n\n*(With $\\lambda>0$ the saturation branch acquires the factor $(1+\\lambda V_{DS})$; the qualitative shape and the break at $V_X=V_t+1$ are unchanged.)*",
        "format": "markdown",
        "sha256": "4f35d9d146f4fdaee938e73242f77ea88d25e846e7eefb195116cfa754e231e1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The cutoff-to-saturation-to-triode regions, break point, and current magnitudes are correct, but the answer assigns the wrong sign to the actual $I_X$. It therefore sketches a downward curve instead of the required quadratic rise followed by a roughly linear rise.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1146,
        "output_tokens": 9136,
        "total_tokens": 10282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1146,
        "output_tokens": 9136,
        "total_tokens": 10282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8184,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Setting up the node voltages\n\nReading the terminals of M1:\n\n* Gate → $V_X$  ⇒  $V_{GS}=V_X$\n* Source and bulk → ground  ⇒  $V_S=V_B=0$  (so $V_{SB}=0$, **no body effect**)\n* Drain → the “+” terminal of the 1 V source  ⇒  $V_D=1\\text{ V}$ (ideal source, no series element)\n\nHence **$V_{DS}=1\\text{ V}$ is held constant** while $V_{GS}=V_X$ is swept. $I_X$ is simply the drain current $I_D$. Let $k=\\mu_n C_{ox}(W/L)$.\n\n## Region boundaries (with $V_{DS}=1$ fixed)\n\n* Cutoff: $V_X<V_{th}$\n* Saturation (pinch‑off, $V_{DS}\\ge V_{GS}-V_{th}$): $V_{th}\\le V_X\\le V_{th}+1$\n* Triode (no pinch‑off, $V_{DS}<V_{GS}-V_{th}$): $V_X>V_{th}+1$\n\n## Resulting expression\n\n$$\nI_X=\n\\begin{cases}\n0, & V_X<V_{th}\\\\[4pt]\n\\dfrac{k}{2}\\,(V_X-V_{th})^2, & V_{th}\\le V_X\\le V_{th}+1\\\\[8pt]\nk\\!\\left[(V_X-V_{th})(1)-\\tfrac{1}{2}\\right]=k\\,(V_X-V_{th}-0.5), & V_X>V_{th}+1\n\\end{cases}\n$$\n\nThe parabola and the straight line meet smoothly at $V_X=V_{th}+1$ (value $=0.5k$, slope $=k$ in both), so the curve has **no kink** at the transition.\n\n## Sketch\n\n```\n        I_X\n         ↑\n         |                              /   linear (triode)\n         |                            /       slope = k\n         |                         ·  /\n         |                      ·    /\n         |                   ·       /   knee at V_X = V_th + 1\n         |                ·\n         |             ·        parabolic (saturation)\n         |          ·           zero slope at V_th\n         |       ·\n         |    ·\n         | ·\n         +--------------------------------→ V_X\n         0   V_th    V_th+1\n```\n\n**Description of the shape:** flat at zero up to $V_{th}$; a concave‑up parabola (starting with zero slope) from $V_{th}$ to $V_{th}+1$; then a straight line of constant slope $k$ for $V_X>V_{th}+1$. (If a numerical $V_{th}$ is specified, place the intercepts accordingly — e.g. with $V_{th}=1\\text{ V}$ the curve is zero to 1 V, parabolic from 1 V to 2 V, and linear beyond 2 V.)",
        "format": "markdown",
        "sha256": "12d955c650721e6eca8f081781d729927986a648fe5a3f944a2f7d06e3da6d85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation region from Vth to Vth + 1 V, and the roughly linear triode region beyond, with consistent equations and sketch.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1146,
        "output_tokens": 6424,
        "total_tokens": 7570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1146,
        "output_tokens": 6424,
        "total_tokens": 7570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5725,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – in the way it is wired, this BJT cannot function as a current source.**\n\nA single BJT only behaves as (an approximation of) a current source when it is biased in the **forward‑active region with a fixed, positive base‑emitter voltage**. Then $I_C \\approx I_S e^{V_{BE}/V_T}$ is set by $V_{BE}$ and is (to first order) independent of the collector‑emitter voltage, so the output terminal delivers a nearly constant current.\n\nIn the figure, however, the base is tied to ground **and** one of the other two terminals is also tied to ground. This forces the transistor out of the useful current‑source bias condition:\n\n- If the grounded second terminal is the **emitter**, then $V_{BE}=0$, the device is in **cutoff**, and essentially no current flows. The output terminal is just an open circuit, not a current source.\n- If the grounded second terminal is the **collector**, then $V_{BC}=0$, the base–collector junction is shorted out, and looking into the emitter you see only the base–emitter p‑n junction – i.e. the two‑terminal device degenerates into a **diode**. Its current is $I \\approx I_S(e^{V/V_T}-1)$, which depends exponentially on the terminal voltage, the exact opposite of current‑source behaviour.\n\nIn neither case is the output current $I_X$ an independent, voltage‑independent quantity; it either is zero or tracks the terminal voltage like a diode. Hence the configuration shown does **not** act as a current source.\n\n(For completeness: even a *properly* biased single‑BJT current source, with $V_{BE}$ held at a positive constant, is only an *approximate* current source because of the Early effect – its output resistance is finite, $r_o = V_A/I_C$. The circuit in the figure fails even that, because the bias does not place it in the active region at all.)\n\nTo make it a real current source you would need to fix $V_{BE}$ at a positive value (e.g. via a resistor/diode or a second diode‑connected BJT for mirroring) and take the output from the **collector**, with the base–emitter loop not shorted to ground.",
        "format": "markdown",
        "sha256": "e74cd529422cde301c058e8f367761144fc8faf5948f661392022ca8807491a0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion is correct, and the hypothetical diode case recognizes voltage-dependent current. But the figure shows a diode-connected PMOS, not a BJT; the answer never identifies the actual connections or the low-impedance (~1/gm) mechanism.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 467,
        "output_tokens": 6937,
        "total_tokens": 7404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6435,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 467,
        "output_tokens": 6937,
        "total_tokens": 7404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6435,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – the circuit as drawn cannot act as a current source.**\n\nReading the schematic: it is an NPN BJT whose **base is tied to ground** (left ground symbol) and whose **emitter is also tied to ground** (right ground symbol). The collector is connected, through a series diode, to terminal *X*, and the current into that terminal is labeled $I_X$.\n\nWhy this fails as a current source:\n\n- A BJT only sinks/sources a controlled collector current when the base–emitter junction is forward biased, i.e. $V_{BE} \\approx 0.7\\text{ V}$. Here both base and emitter sit at the same node (ground), so\n$$V_{BE} = 0\\text{ V}$$\n  The B–E junction is not forward biased, the transistor is in **cutoff**, and $I_C \\approx 0$ (only leakage).\n- The diode at the top is in series with the *collector* only; it is not connected to the base, so it provides no bias path that could establish a base current or a $V_{BE}$. There is simply no bias to set an operating point.\n- Consequently the path from *X* (diode → collector → emitter → ground) is effectively an **open circuit** at the quiescent point. An ideal current source $I_X$ would have no closed DC path, so no defined, load‑independent current can be delivered.\n\nFor comparison, a proper BJT current source fixes $V_{BE}$ at about 0.7 V (e.g. by tying the base to a reference voltage or a diode‑connected transistor) so that a set $I_B$ produces a roughly constant $I_C$ over a range of $V_{CE}$, giving the high output resistance that makes it behave as a current source. In the figure that bias is missing because the base and emitter are shorted together.\n\n**Conclusion:** with $V_{BE}=0$ the device is off and $I_X = 0$; it does not function as a current source.",
        "format": "markdown",
        "sha256": "768b1455a2ba0c5d4b1f7ec9a71aec9b9794bf8f3ac6b48d32046db9cd4ecd5d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the device as a BJT with grounded base and emitter. The figure shows a diode-connected PMOS, whose low impedance (about 1/gm) prevents it from acting as a current source.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 467,
        "output_tokens": 3719,
        "total_tokens": 4186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 467,
        "output_tokens": 3719,
        "total_tokens": 4186,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3266,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: No – not as it is wired.**\n\n**Reading the schematic**\n\nThe symbol is an NPN BJT. Tracing the three leads:\n\n* **Base** – the left lead of the bar → tied to the left ground symbol.\n* **Emitter** – the diagonal *with* the arrow → tied to the right ground symbol.\n* **Collector** – the diagonal *without* the arrow → connected to the terminal carrying $I_x$.\n\nSo the base and the emitter are both connected to the same node (ground).\n\n**Why that kills the \"current‑source\" behaviour**\n\nA BJT acts as a (good) current source only when it is in the **forward‑active region**: the base–emitter junction must be forward‑biased ($V_{BE}\\approx 0.6\\text{–}0.7\\ \\text{V}$) so that $I_C$ is set by $V_{BE}$ and is (approximately) independent of $V_{CE}$, with the collector then serving as the output terminal.\n\nIn the figure,\n\n$$V_{BE} = V_B - V_E = 0\\ \\text{V} - 0\\ \\text{V} = 0\\ \\text{V}$$\n\ni.e. the base–emitter junction is **not** forward‑biased. The transistor is in **cutoff**: no collector current is generated by the device, and the output resistance / current‑regulation property that makes a BJT a current source simply does not exist. The current $I_x$ in that branch is therefore not produced or regulated by the transistor at all – it is whatever the external element at the top terminal happens to force (and if that terminal is open, $I_x = 0$). The transistor is just sitting off to the side.\n\n**What would be needed**\n\nTo use this BJT as a current source you must give the base a forward bias relative to the emitter (e.g. a reference voltage, or a resistor to a supply, on the base, with the emitter at a fixed potential) so that it operates in the active region; then the collector terminal can supply a nearly constant current into a load. As drawn, with both base and emitter grounded, that condition is not met.\n\n**Conclusion:** With the base and emitter shorted to ground, $V_{BE}=0$ and the transistor is in cutoff, so the shown configuration **cannot** function as a current source.",
        "format": "markdown",
        "sha256": "2cae662caf9afbb3d8c939001a08e18d1d25c0a3a2300499669364851e12f6ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the diode-connected PMOS as an NPN BJT and concludes it is off because its base and emitter are grounded. It misses the actual low-impedance behavior that prevents current-source operation.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 467,
        "output_tokens": 4927,
        "total_tokens": 5394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4399,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 467,
        "output_tokens": 4927,
        "total_tokens": 5394,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4399,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nReading the symbol and the terminal connections:\n\n* **M₁ is a PMOS transistor.** The bulk/substrate arrow is on the **top** terminal, and that top terminal is the one tied (through $R_S$) to the highest potential ($V_{DD}$). For a PMOS the bulk must sit at the most‑positive terminal, so this is the only consistent reading. (If it were an NMOS the body would have to be the ground‑side terminal, not the $V_{DD}$‑side one.)\n* **Source** = top terminal → to $V_{DD}$ through $R_S$.\n* **Drain** = bottom terminal → to ground through $R_D$ and to $V_{out}$.\n* **Bulk = Source** (the arrow terminal is the same node as the source). Hence $V_{SB}=0$ and **there is no body effect**.\n* **Gate** = input $V_{in}$.\n\nSo the input is at the gate, the output is at the drain, and the source is returned to AC‑ground ($V_{DD}$) **through** $R_S$. This is a **common‑source (CS) stage with source degeneration $R_S$ and drain load $R_D$** (inverting). Note that $R_S$ and $R_D$ play the \"opposite\" positions from an NMOS CS stage, which is exactly what you expect for a PMOS (source to the supply, drain to ground).\n\nA second important point: there is **no separate bias network** – the gate is driven directly by $V_{in}$. Therefore $V_{in}$ (its DC level) sets the operating point; the stage is DC‑coupled.\n\n---\n\n## 2. DC analysis (saturation)\n\nLet $I_D$ be the drain current (flows $V_{DD}\\to$ source $\\to$ drain $\\to$ ground). Then\n\n$$V_S = V_{DD} - I_D R_S,\\qquad V_D = V_{out} = I_D R_D$$\n\n$$V_{SG} = V_S - V_{in} = V_{DD} - V_{in} - I_D R_S$$\n\nIn saturation ($V_{SG}>|V_T|$ and $V_{SD}\\ge V_{SG}-|V_T|$), with $k_p=\\mu_p C_{ox}(W/L)$:\n\n$$I_D = \\tfrac{k_p}{2}\\big(V_{SG}-|V_T|\\big)^2 = \\tfrac{k_p}{2}\\big(V_{DD}-V_{in}-|V_T|-I_D R_S\\big)^2$$\n\nThis quadratic fixes $I_D$ (and hence $V_{out}=I_D R_D$) for a given $V_{in}$. Saturation additionally requires\n\n$$V_{SD}=V_{DD}-I_D(R_S+R_D)\\ \\ge\\ V_{SG}-|V_T|$$\n\nOutside these limits the device is in triode (or cut‑off, if $V_{SG}<|V_T|$).\n\n---\n\n## 3. Small‑signal analysis\n\nLet $v_s, v_d(=v_{out})$ be the small‑signal source and drain node voltages, and $v_{gs}=v_{in}-v_s$. Using the standard MOS small‑signal model ($g_m$ and $r_o$ between D and S), KCL at the source and drain nodes (both $R_S$ and $R_D$ go to AC ground) gives the compact transfer function\n\n$$\\boxed{\\,A_v = \\dfrac{v_{out}}{v_{in}} = -\\,\\dfrac{g_m R_D}{1 + g_m R_S + \\dfrac{R_S+R_D}{r_o}}\\,}$$\n\n* With $r_o\\to\\infty$: $\\;A_v = -\\dfrac{g_m R_D}{1+g_m R_S}$ (inverting).\n* $R_S=0$: $A_v = -g_m(R_D\\parallel r_o)$, the ordinary CS gain.\n* **Large degeneration** ($g_m R_S\\gg 1$): $A_v \\approx -\\dfrac{R_D}{R_S}$, i.e. the gain is set by the *resistor ratio*, independent of device parameters, and the effective transconductance is $\\approx 1/R_S$.\n\n**Input resistance:** $R_{in}=\\infty$ (MOS gate).\n\n**Output resistance** (looking into the drain node with $v_{in}=0$): the degenerated CS output resistance at the drain is $r_o(1+g_m R_S)+R_S$, in parallel with $R_D$:\n\n$$\\boxed{\\,R_{out} = R_D \\,\\big\\|\\, \\big[\\,r_o(1+g_m R_S)+R_S\\,\\big]\\,}$$\n\n---\n\n## 4. Role of the components / summary\n\n* $R_D$ – drain **load**; sets the output voltage swing and (with $g_m$) the gain.\n* $R_S$ – **source degeneration** resistor: provides local (series) negative feedback that (i) reduces and linearises the gain, (ii) stabilises $I_D$ against $k_p$ and $V_T$ variations, and (iii) raises the output resistance. In the deep‑degeneration limit the gain collapses to the passive ratio $-R_D/R_S$.\n* $V_{in}$ – provides **both** the signal and the DC gate bias (no bias network present).\n* Bulk tied to source ⇒ no body effect; device operates as a clean, inverting, high‑input‑impedance common‑source amplifier with source degeneration.\n\nIn short: it is a **DC‑coupled, source‑degenerated PMOS common‑source amplifier**, inverting, with $R_{in}\\to\\infty$, gain $A_v=-g_mR_D/[1+g_mR_S+(R_S+R_D)/r_o]$, and $R_{out}=R_D\\parallel[r_o(1+g_mR_S)+R_S]$.",
        "format": "markdown",
        "sha256": "df423cbe7db2c5cb7b64ae4616b12b142528222b72bb41fc5c50c0c83eb1762b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS source-degenerated common-source stage and gives the inverting gain −gmRD/(1 + gmRS). The bulk/body-effect assumption is a secondary issue under the full-credit rule.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1239,
        "output_tokens": 14829,
        "total_tokens": 16068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1239,
        "output_tokens": 14829,
        "total_tokens": 16068,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13474,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n* **M1 is a PMOS** (the arrow on the upper terminal points *into* the channel, i.e. inward – the PMOS convention – and that terminal is the one at the higher potential).\n* The upper terminal (toward $V_{DD}$) is the **source**, the lower terminal (toward ground) is the **drain**. This is confirmed by the resistor labels $R_S$ (at the source) and $R_D$ (at the drain).\n* The input is applied to the **gate** ($V_{in}$) and the output is taken at the **drain** node (the dot between M1 and $R_D$).\n\n> Therefore the stage is a **PMOS common‑source amplifier with source degeneration** $R_S$ and drain load $R_D$ – the exact mirror image of an NMOS CS stage with $R_S$ to ground and $R_D$ to $V_{DD}$. (If the output were instead taken at the *source* node, the same drawing would be a PMOS source follower.)\n\nBecause no explicit gate‑bias network is shown, the DC gate voltage is whatever DC level $V_{in}$ carries; the circuit is therefore a directly‑coupled CS stage and $V_{in}$ must contain a DC component that keeps M1 in saturation.\n\n---\n\n## 2. DC (bias) analysis\n\nLet $I_D$ be the (DC) drain current. Conventional current flows $V_{DD}\\to R_S \\to$ source $\\to$ drain $\\to R_D \\to$ ground, so\n\n$$V_S = V_{DD}-I_D R_S ,\\qquad V_D = V_{out} = I_D R_D$$\n\n$$V_{SG} = V_S - V_G = V_{DD}-V_{in}-I_D R_S$$\n\nAssuming saturation and (for the moment) no body effect,\n\n$$I_D = \\tfrac{1}{2}\\,\\mu_p C_{ox}\\tfrac{W}{L}\\,(V_{SG}-|V_{tp}|)^2 = \\tfrac{\\beta_p}{2}\\,(V_{DD}-V_{in}-|V_{tp}|-I_D R_S)^2$$\n\nwith $\\beta_p=\\mu_p C_{ox}W/L$. Defining the overdrive $V_{OV}=V_{SG}-|V_{tp}|=\\sqrt{2I_D/\\beta_p}$ and $V_0=V_{DD}-V_{in}-|V_{tp}|$, this becomes the quadratic\n\n$$\\frac{R_S}{2\\beta_p}V_{OV}^2+V_{OV}-V_0=0 \\;\\;\\Rightarrow\\;\\; V_{OV}=\\frac{\\beta_p}{R_S}\\Big(\\sqrt{1+\\tfrac{2R_S V_0}{\\beta_p}}-1\\Big),\\quad I_D=\\frac{V_{OV}^2}{2\\beta_p}$$\n\nand $V_{out}=I_D R_D$.\n\n**Conduction / saturation conditions**\n\n* $V_0>0$ (i.e. $V_{DD}-V_{in}>|V_{tp}|$) for the device to turn on.\n* Saturation requires $V_{SD}\\ge V_{OV}$, i.e. $V_{DD}-I_D(R_S+R_D)\\ge V_{OV}$, which also sets the maximum swing of $V_{out}$.\n\nIf the body is tied to $V_{DD}$ (the usual reverse‑bias choice for a PMOS whose source sits near $V_{DD}$), then $V_{BS}=V_{DD}-V_S\\neq0$ and the body effect must be included; it increases the effective $R_S$ seen by the channel (see §3).\n\n---\n\n## 3. Small‑signal model and gain\n\nAC‑grounds: $V_{DD}$ (top of $R_S$) and ground (bottom of $R_D$). Let $v_s$ and $v_d=v_{out}$ be the small signals at source and drain, and $v_g=v_{in}$. With $g_m$, $g_{mb}$, $r_o$ and $v_{gs}=v_{in}-v_s$, $v_{bs}=-v_s$ (body at AC ground):\n\n$$i_{ds}=g_m v_{gs}+g_{mb}v_{bs}+\\frac{v_d-v_s}{r_o}$$\n\nKCL at source and drain ($i_{ds}=v_s/R_S=-v_d/R_D$) gives $v_s=-(R_S/R_D)\\,v_d$, and after substitution:\n\n$$\\boxed{\\,A_v=\\frac{v_{out}}{v_{in}}=-\\,\\frac{g_m R_D}{\\,1+(g_m+g_{mb})R_S+\\dfrac{R_S+R_D}{r_o}\\,}\\,}$$\n\n* **Ideal** ($r_o\\to\\infty$, body effect neglected): $\\displaystyle A_v=-\\frac{g_m R_D}{1+g_m R_S}$ (inverting).\n  * If $R_S=0$ this reduces to the familiar $-g_m R_D$.\n  * It is useful to read this as $A_v=-G_m R_D$ with the *degenerated* stage transconductance $G_m=\\dfrac{g_m}{1+g_m R_S}$ – $R_S$ is local negative feedback that lowers the gain by the factor $1+g_mR_S$.\n* **With body effect** (body to $V_{DD}$) the term $g_mR_S$ becomes $(g_m+g_{mb})R_S$, further reducing the gain.\n\n$R_S$ does **not** appear in the numerator, so it only reduces gain; it does not change the sign.\n\n---\n\n## 4. Input and output resistance\n\n* **Input resistance:** $R_{in}=\\infty$ (MOS gate; no DC or AC gate current). $R_S$ has no effect on $R_{in}$.\n* **Output resistance** (looking into the drain, $v_{in}=0$): applying a test source,\n\n$$\\boxed{\\,R_{out}=\\frac{r_o}{1+R_S(g_m+g_{mb})+R_S/r_o}\\;\\approx\\;r_o\\,[1+R_S(g_m+g_{mb})]\\,}$$\n\ni.e. source degeneration **boosts the output resistance** (a desirable property for a CS stage, e.g. when used as a high‑impedance amplifier). Neglecting $g_{mb}$, $R_{out}\\approx r_o(1+g_mR_S)$.\n\n---\n\n## 5. Summary / role of $R_S$\n\n| Quantity | Expression (ideal) |\n|---|---|\n| Topology | PMOS common‑source, source degenerated |\n| $I_D$ (DC) | from $\\frac{R_S}{2\\beta_p}V_{OV}^2+V_{OV}-(V_{DD}-V_{in}-|V_{tp}|)=0$ |\n| $V_{out}$ (DC) | $I_D R_D$ |\n| $A_v$ | $-\\dfrac{g_m R_D}{1+g_mR_S}$ |\n| $G_m$ (stage) | $\\dfrac{g_m}{1+g_mR_S}$ |\n| $R_{in}$ | $\\infty$ |\n| $R_{out}$ | $\\approx r_o(1+g_mR_S)$ |\n\n$R_S$ introduces source (local) negative feedback: it **reduces the voltage gain** and makes it **less sensitive to $g_m$ variations**, **improves linearity**, and **increases the output resistance**. The price paid is the lower gain; the input resistance stays infinite. For correct operation $V_{in}$ must provide a DC gate bias that keeps M1 in the saturation region (conditions in §2), and the body should be tied to $V_{DD}$ to keep the body–source junction reverse biased (this adds the $g_{mb}$ terms shown above).",
        "format": "markdown",
        "sha256": "81cf14c2768e3d8c7c26d4ebfc121ae6dee12bd68eed66ef63e5e5a0bf38c201"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS), with body effect as a refinement.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1239,
        "output_tokens": 11616,
        "total_tokens": 12855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1239,
        "output_tokens": 11616,
        "total_tokens": 12855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9804,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nReading the symbol carefully:\n\n* The **gate** of M₁ is driven by $V_{in}$.\n* The **arrow (source terminal)** is on the *top* lead, which is tied to $V_{DD}$ through $R_S$.\n* The *bottom* lead (drain) is tied to ground through $R_D$, and $V_{out}$ is taken at this bottom node.\n\nBecause the source is the **higher‑potential** terminal (it sits near $V_{DD}$), M₁ must be a **PMOS** device. (For an NMOS the source/arrow would be on the bottom, lower‑potential node.)\n\nSo the topology is a **common‑source (CS) amplifier, degenerated by $R_S$**, built with a PMOS:\n\n* $V_{DD}$ → **AC ground**\n* $R_S$ = source resistor (source → AC ground) – provides DC bias path *and* source degeneration\n* $R_D$ = drain load (drain → ground) – the voltage‑converting load\n* Input at the gate, output at the drain ⇒ **inverting** stage, very high input impedance.\n\n---\n\n## 2. DC / bias analysis\n\nLet $I_D$ be the (positive) current flowing from $V_{DD}$ through $R_S$, into the source, out of the drain, and through $R_D$ to ground.\n\n$$V_S = V_{DD} - I_D R_S,\\qquad V_D = V_{out} = I_D R_D$$\n$$V_{SG} = V_S - V_{in} = V_{DD} - V_{in} - I_D R_S$$\n$$V_{SD} = V_{DD} - I_D(R_S+R_D)$$\n\nIn saturation,\n\n$$I_D = \\tfrac{1}{2}\\,k_p\\frac{W}{L}\\,(V_{SG}-|V_{thp}|)^2,\\qquad g_m = k_p\\frac{W}{L}(V_{SG}-|V_{thp}|)=\\frac{2I_D}{V_{SG}-|V_{thp}|}$$\n\nSubstituting $V_{SG}$ gives an implicit (quadratic) equation for $I_D$ once the DC level of $V_{in}$ is fixed. **Saturation condition:**\n\n$$V_{SD}\\ge V_{SG}-|V_{thp}|\\quad\\Longleftrightarrow\\quad V_{out}=I_D R_D \\le V_{in}+|V_{thp}|$$\n\n(plus $V_{SG}\\ge |V_{thp}|$ for conduction).\n\n---\n\n## 3. Small‑signal analysis\n\nWith $V_{DD}$ and ground shorted, $R_S$ goes from source to AC ground and $R_D$ from drain to AC ground. Using the universal MOSFET small‑signal relation (current *into* the drain) $i_d = g_m v_{gs} + (v_d-v_s)/r_o$, and $v_g=v_{in}$, $v_d=v_{out}$:\n\n* Source node: $\\;v_s/R_S = i_d$\n* Drain node: $\\;v_d/R_D + i_d = 0 \\;\\Rightarrow\\; i_d = -v_d/R_D$\n\nHence $v_s = -(R_S/R_D)\\,v_d$. Substituting into the device equation and solving:\n\n$$\\boxed{\\,A_v \\equiv \\frac{v_{out}}{v_{in}} = \\frac{-g_m R_D}{\\,1 + g_m R_S + \\dfrac{R_S+R_D}{r_o}\\,}\\,}$$\n\n* **With $r_o\\to\\infty$:** $\\;A_v \\approx \\dfrac{-g_m R_D}{1+g_m R_S}$\n* The negative sign confirms the **inverting** (CS) action: raising $V_{in}$ lowers $V_{SG}$, reduces $I_D$, and lowers $V_{out}$.\n* $R_S$ is a **degeneration** resistor: it reduces the gain by the factor $1+g_m R_S$, but improves linearity, widens bandwidth, and raises the output resistance.\n\n**Input resistance:** $R_{in}=\\infty$ (gate draws no current).\n\n**Output resistance** (looking into $v_{out}$ with $v_{in}=0$):\n\n$$R_{out} = R_D \\,\\big\\|\\, \\big[\\,R_S + r_o + g_m R_S r_o\\,\\big] \\;\\approx\\; R_D \\,\\big\\|\\, \\big[r_o(1+g_m R_S)+R_S\\big]$$\n\ni.e. much larger than $R_D$ alone because of the degeneration‑boosted look‑in resistance at the drain.\n\n---\n\n## 4. Summary\n\n| Item | Value / observation |\n|---|---|\n| Device / config | PMOS, **common‑source with source degeneration** |\n| AC reference | $V_{DD}$ = AC ground |\n| Phase | Inverting ($A_v<0$) |\n| Gain | $-g_m R_D/(1+g_m R_S)$ (or the $r_o$‑loaded form above) |\n| $R_{in}$ | $\\infty$ |\n| $R_{out}$ | $R_D\\,\\|\\,[r_o(1+g_m R_S)+R_S]$ |\n| Bias | Set by DC $V_{in}$ via $I_D=\\frac12 k_p\\frac WL(V_{DD}-V_{in}-I_DR_S-|V_{thp}|)^2$; saturation requires $V_{out}\\le V_{in}+|V_{thp}|$ |\n| Role of $R_S$ | DC source path + negative feedback (lower gain, higher $R_{out}$, better linearity) |\n| Role of $R_D$ | Drain load converting $I_D$ into $V_{out}$ |\n\nIn short, the figure is the **PMOS mirror image of a standard degenerated NMOS common‑source stage** (where $V_{DD}$ and ground would be swapped), giving an inverting voltage amplifier whose gain is set by $g_m R_D/(1+g_m R_S)$.",
        "format": "markdown",
        "sha256": "ea841cfeff647e8ac742d846bcd62e3e6a498790914b31bf1090412e7ce477f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS). The additional ro gain expression is also consistent with the stated model.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1239,
        "output_tokens": 9452,
        "total_tokens": 10691,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8047,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1239,
        "output_tokens": 9452,
        "total_tokens": 10691,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8047,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nReading the terminals of M1 (an enhancement‑mode NMOS):\n\n* **Drain** → tied directly to $V_{DD}$ (a.c. ground).\n* **Gate** → input node $V_{in}$.\n* **Source** (the terminal carrying the body arrow) → the node that is both the output $V_{out}$ and the top of $R_S$; $R_S$ returns to ground.\n\nWith the input at the gate, the output at the source and the drain at a.c. ground, this is a **common‑drain amplifier = source follower**. The resistor $R_S$ plays the dual role of *biasing element* (it sets the d.c. drain current) and *load* (it sets the small‑signal gain).\n\n---\n\n## 1. D.C. (bias) analysis\n\nGate current is zero, so $I_D = I_S$. Let $V_S = V_{out}$.\n\n$$V_{out} = I_D\\,R_S$$\n$$V_{GS} = V_{in} - V_{out} = V_{in} - I_D R_S$$\n\nSaturation current (neglecting channel‑length modulation for the moment) is\n\n$$I_D = \\tfrac{1}{2}k_n\\,(V_{GS}-V_{th})^2,\\qquad k_n=\\mu_n C_{ox}\\tfrac{W}{L}$$\n\nSubstituting gives the quadratic that fixes the Q‑point:\n\n$$I_D = \\tfrac{k_n}{2}\\bigl(V_{in} - I_D R_S - V_{th}\\bigr)^2$$\n\nEquivalently, written at the output node:\n\n$$\\boxed{V_{out} = V_{in} - V_{GS},\\qquad V_{GS}=V_{th}+\\sqrt{\\tfrac{2R_S\\,V_{out}}{k_n}}}$$\n\nso the d.c. output sits one $V_{GS}$ below the d.c. input — the stage acts as a **downward level shifter** by $\\approx V_{GS}$.\n\n*Saturation requirement:* $V_{DS}\\ge V_{GS}-V_{th}\\;\\Rightarrow\\; V_{DD}-V_{out}\\ge V_{GS}-V_{th}$ (easily met for normal bias).\n\nIncluding $\\lambda$: $I_D=\\tfrac{k_n}{2}(V_{GS}-V_{th})^2(1+\\lambda V_{DS})$, which yields $r_o=1/(\\lambda I_D)$ for the small‑signal model.\n\nTransconductance at the Q‑point:\n\n$$g_m = \\frac{2I_D}{V_{GS}-V_{th}} = \\sqrt{2k_n I_D} = \\sqrt{\\frac{2k_n\\,V_{out}}{R_S}}$$\n\n---\n\n## 2. Small‑signal analysis\n\nSet $v_d=0$ (drain at a.c. ground), $v_g=v_{in}$, $v_s=v_{out}$. The transistor delivers to the source node\n\n$$i_d = g_m(v_{in}-v_{out}) + \\frac{v_d-v_s}{r_o} = g_m(v_{in}-v_{out}) - \\frac{v_{out}}{r_o}$$\n\nKCL at the source node ($i_d = v_{out}/R_S$):\n\n$$\\frac{v_{out}}{R_S} = g_m(v_{in}-v_{out}) - \\frac{v_{out}}{r_o}$$\n\n**Voltage gain**\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m}{g_m+\\tfrac{1}{R_S}+\\tfrac{1}{r_o}}=\\frac{g_m\\,(R_S\\!\\parallel\\! r_o)}{1+g_m\\,(R_S\\!\\parallel\\! r_o)}}$$\n\n* Always **positive** (non‑inverting).\n* Always **< 1**; approaches 1 when $g_m R_S\\gg 1$. With $r_o\\!\\to\\!\\infty$: $A_v=\\dfrac{g_m R_S}{1+g_m R_S}$.\n\n**Input impedance**\n\n$$\\boxed{Z_{in}\\to\\infty}$$\n(gate is insulating; only the physical $C_{gs},C_{gd}$ appear at high frequency — see §4).\n\n**Output impedance** (drive a test current $i_t$ at the source, $v_{in}=0$):\n\n$$\\boxed{Z_{out}=\\frac{1}{g_m}\\,\\parallel\\,R_S\\,\\parallel\\,r_o \\;\\approx\\; \\frac{1}{g_m}}$$\n\ni.e. a **low** output impedance, set mainly by $1/g_m$.\n\n---\n\n## 3. Functional summary\n\n| Property | Value / comment |\n|---|---|\n| Configuration | Common‑drain (source follower) |\n| Voltage gain | $<1$, $\\approx 1$ if $g_m R_S\\gg1$; non‑inverting |\n| Input impedance | $\\approx \\infty$ |\n| Output impedance | $\\approx 1/g_m$ |\n| D.c. level shift | $V_{out}=V_{in}-V_{GS}$ (lower by $\\approx V_{GS}$) |\n| $R_S$ role | sets bias current *and* the load/gain |\n| Typical use | Voltage buffer / impedance matcher, level shifter, driver for capacitive loads |\n\nBecause the gain is below unity and non‑inverting, there is **no Miller multiplication** of $C_{gd}$, which makes the stage well suited to wide‑band buffering.\n\n---\n\n## 4. High‑frequency notes (parasitics)\n\n* **At the input:** $C_{gd}$ sees the full $v_{in}$, while $C_{gs}$ sees only $v_{in}-v_{out}=(1-A_v)v_{in}$ (bootstrapping). Hence\n  $C_{in}=C_{gd}+C_{gs}(1-A_v) \\lesssim C_{gd}+C_{gs}$.\n* **At the output (with $v_{in}=0$ the gate is a.c. ground):** $C_{gs}$ and $C_{db}$ both appear from source to ground, so the output pole is\n  $f_p \\approx \\dfrac{1}{2\\pi\\,Z_{out}\\,(C_L+C_{gs}+C_{db})}$,\n  showing that the low $Z_{out}\\approx1/g_m$ is what allows the follower to drive the load capacitance $C_L$.\n\n---\n\n### Bottom line\nThe schematic is a **NMOS source follower**: drain to $V_{DD}$, gate driven by $V_{in}$, source loaded by $R_S$ to ground with $V_{out}$ taken at the source. It delivers a unity‑ish, non‑inverting gain ($A_v=g_m(R_S\\!\\parallel\\!r_o)/[1+g_m(R_S\\!\\parallel\\!r_o)]$), very high input impedance, and low output impedance ($\\approx1/g_m$), while shifting the d.c. level down by $V_{GS}$ — the textbook voltage buffer.",
        "format": "markdown",
        "sha256": "3907e214a47f2d9a0424aed1be22222d50efe91af00d6ea16f35d64b993b4ceb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the equivalent expression with finite output resistance. This satisfies the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 981,
        "output_tokens": 7076,
        "total_tokens": 8057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 981,
        "output_tokens": 7076,
        "total_tokens": 8057,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5448,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nReading the transistor symbol (gate on the left, the top lead to $V_{DD}$, the bottom lead with the **outward‑pointing source arrow** to $R_S$):\n\n* $M_1$ is an **NMOS** device.\n* **Drain** → $V_{DD}$ (AC ground)\n* **Gate** → $V_{in}$ (input)\n* **Source** → node $V_{out}$, which also connects to $R_S$ to ground (the load)\n\nThe input is at the gate, the output is taken at the source, and the drain is held at an AC constant. This is the **common‑drain / source‑follower (buffer)** configuration, with $R_S$ acting as both the bias resistor and the load. (If the source arrow were drawn *inward*, the same drawing would be a PMOS common‑source stage; the outward arrow fixes it as the NMOS follower below.)\n\n---\n\n## DC (bias) analysis\n\nLet $V_G = V_{in,DC}$ and $V_S = V_{out,DC}$. With $I_G=0$, $I_D = I_{R_S} = V_S/R_S$.\n\n$$V_{GS} = V_G - V_S = V_G - I_D R_S$$\n$$I_D = \\tfrac{1}{2}k\\,(V_{GS}-V_{th})^2 \\qquad (k=\\mu C_{ox}W/L)$$\n\nThese two equations are solved simultaneously for the quiescent $I_D$ and $V_{GS}$ (hence $V_S$).\n\n**Saturation conditions:**\n\n* $V_{GS} > V_{th}$\n* $V_{DS} = V_{DD}-I_D R_S \\ge V_{GS}-V_{th} \\;\\Rightarrow\\; V_G \\le V_{DD}-V_{th}$\n\nSo the device is in saturation as long as $V_{in,DC}$ is high enough to turn the transistor on but low enough that $V_{in,DC}+V_{th} \\le V_{DD}$ (i.e. the source never gets pulled up close to the drain).\n\n---\n\n## Small‑signal analysis\n\nAC model: gate = $v_{in}$, drain = 0 V (AC), source node = $v_{out}$. $v_{gs}=v_{in}-v_{out}$, $v_{ds}=-v_{out}$.\n\n**Voltage gain.** KCL at the source node (output open):\n\n$$g_m v_{gs} = v_{out}\\!\\left(\\frac{1}{R_S}+\\frac{1}{r_o}\\right)$$\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}} = \\frac{g_m}{g_m+\\dfrac{1}{R_S}+\\dfrac{1}{r_o}} = \\frac{g_m(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)}}$$\n\nNeglecting $r_o$: $A_v \\approx \\dfrac{g_m R_S}{1+g_m R_S}$.\n\n* $A_v < 1$ and **non‑inverting** (the signature of a follower).\n* $A_v \\to 1$ when $g_m R_S \\gg 1$ (large $R_S$ or strong device).\n\n**Input resistance.** The gate draws no current, so\n\n$$R_{in} \\approx \\infty$$\n\n(very high – the main advantage of the MOSFET follower).\n\n**Output resistance.** Set $v_{in}=0$ (gate grounded) and look into $V_{out}$. The resistance looking into the source of the MOSFET (gate and drain at AC ground) is $1/(g_m+1/r_o)\\approx 1/g_m$. Hence\n\n$$R_{out} = R_S \\parallel \\frac{1}{g_m+1/r_o} \\approx R_S \\parallel \\frac{1}{g_m}$$\n\nwhich is **low**, typically $\\ll R_S$ (on the order of a few hundred ohms to a few kΩ).\n\n---\n\n## Frequency response (brief)\n\n* $C_{gd}$ sits from the gate (input) to the drain (AC ground) → adds to the input capacitance with **no Miller multiplication** (gain from gate to drain ≈ 0).\n* $C_{gs}$ sits from gate to source with a voltage gain $A_v\\approx 1$, so its Miller factor $(1-A_v)\\ll 1$ is small.\n\nTherefore the source follower does **not** suffer the large Miller bandwidth penalty of a common‑source stage and has reasonably good high‑frequency behaviour.\n\n---\n\n## Summary / function\n\n| Parameter | Result |\n|---|---|\n| Topology | Common‑drain / source follower (NMOS) |\n| $A_v$ | $\\dfrac{g_m(R_S\\parallel r_o)}{1+g_m(R_S\\parallel r_o)} \\approx \\dfrac{g_m R_S}{1+g_m R_S}$ (positive, $<1$) |\n| $R_{in}$ | $\\infty$ (gate) |\n| $R_{out}$ | $R_S\\parallel(1/g_m)$ – low |\n| Phase | non‑inverting |\n\nThe stage is a **voltage buffer**: it reproduces $V_{in}$ almost exactly at $V_{out}$ while converting a high‑impedance input into a low‑impedance output, making it ideal for driving low‑impedance loads or isolating a sensitive node from a load without losing the signal amplitude.",
        "format": "markdown",
        "sha256": "7bb61adff467acee81fa0503012680e3337fd9f79b78085d4bce3960fe14efde"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, satisfying the explicit full-credit rule. The extra DC saturation-condition error is supplementary and does not change the central result.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 981,
        "output_tokens": 6634,
        "total_tokens": 7615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5381,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 981,
        "output_tokens": 6634,
        "total_tokens": 7615,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5381,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic – identifying the terminals\n\n| Node | Connection |\n|------|-----------|\n| Top terminal of M₁ | tied to **V_DD** → this is the **drain** |\n| Left terminal (plate) | **V_in** → **gate** |\n| Bottom terminal (arrow out) | node **V_out** → **source** |\n| V_out node | also connected to **R_S**, which goes to ground |\n\nThe arrow on the source points *outward*, consistent with an **NMOS** device (drain at the highest potential V_DD, source at V_out < V_DD).\n\nBecause the **drain is the terminal held at AC ground** (V_DD is a DC rail → 0 V for small signals), the input is applied to the **gate** and the output is taken from the **source**, this is a **common‑drain amplifier = source follower** (the MOSFET version of an emitter/source follower). R_S is not a \"bypassed degeneration resistor\" here – it is the **load** and the bias element, and it is *not* bypassed, so it also provides local negative feedback.\n\n> Common mistake to avoid: a resistor in the source does **not** make a stage \"common‑source.\" The configuration is named by the terminal that is common to input and output. Here drain = AC ground = common, so it is common‑drain.\n\n---\n\n## 2. DC (bias) analysis\n\nGate current ≈ 0, so the same current I_D flows through R_S:\n\n- V_S = V_out = I_D·R_S\n- V_GS = V_in − V_S = V_in − I_D·R_S\n- Saturation current:  I_D = ½·k_n·(V_GS − V_th)²,  k_n = μ_n C_ox (W/L)\n\nSubstituting V_GS gives a quadratic in I_D (or in V_S):\n\n  I_D = ½ k_n (V_in − V_th − I_D R_S)²\n\nSolve it for the operating point. The device must satisfy\n\n- **On:** V_GS > V_th  →  V_in > V_th + I_D R_S\n- **Saturation:** V_DS = V_DD − I_D R_S > V_GS − V_th  (i.e. V_DD large enough)\n\nNote the DC transfer is **V_out = V_in − V_GS**, so the follower has a constant **V_GS offset** (a few hundred mV to ≈1 V); it is a unity‑gain *small‑signal* buffer but a level‑shifter in DC.\n\n---\n\n## 3. Small‑signal analysis\n\nLet v_in be the gate signal and v_out = v_s the source signal. The drain is at AC ground.\nv_gs = v_in − v_s. KCL at the source node (gate draws no current; output terminal open):\n\n  g_m·v_gs = v_s / R_S  (ignoring r_o)\n\n  g_m(v_in − v_s) = v_s/R_S  →  v_s = g_m R_S/(1 + g_m R_S) · v_in\n\n**Voltage gain**\n\n  A_v = v_out/v_in = g_m R_S / (1 + g_m R_S) = R_S / (R_S + 1/g_m)\n\n- **Positive and < 1** (no phase inversion).\n- Interpreted as a divider between the load R_S and the intrinsic source resistance 1/g_m.\n- Including the channel resistance r_o (drain = AC ground ⇒ r_o in parallel with R_S at the source node):\n\n  A_v = g_m (R_S ∥ r_o) / [1 + g_m (R_S ∥ r_o)]\n\n**Input resistance**\n\n  R_in ≈ ∞  (MOS gate)\n\n**Output resistance** (v_in = 0, look into V_out)\n\n  R_out = R_S ∥ (1/g_m) ∥ r_o  ≈  R_S ∥ (1/g_m)\n\nwhich is **low** – the hallmark of a follower.\n\n**Phase:** 0° (in‑phase), opposite to a common‑source stage (180°).\n\n---\n\n## 4. Frequency response / bandwidth\n\n- The output node sees R_out charging (C_load + C_db + C_pb); this sets the dominant pole, **f_p ≈ 1/(2π R_out C_L)**. Because R_out is small, the bandwidth is wide.\n- **No Miller penalty:** C_gd connects gate (input) to drain (AC ground), so it simply loads the input; C_gs sees v_in at one end and v_out ≈ v_in at the other, so it does *not* multiply and does not load the input. Hence the follower stays useful to high frequency.\n- A right‑half‑plane zero from the source follower (≈ g_m/C_gs at very high f) can appear but is usually beyond the dominant pole.\n\n---\n\n## 5. Summary of characteristics\n\n| Parameter | Expression / behaviour |\n|-----------|------------------------|\n| Type | Common‑drain / source follower (NMOS), with R_S as load + feedback |\n| Gain A_v | g_m R_S/(1+g_m R_S) ≈ R_S/(R_S+1/g_m), **0 < A_v < 1**, non‑inverting |\n| R_in | ≈ ∞ |\n| R_out | R_S ∥ (1/g_m) ∥ r_o ≈ R_S ∥ (1/g_m) (low) |\n| Phase | 0° |\n| DC level | V_out = V_in − V_GS (constant offset) |\n| Bandwidth | High (low R_out, no Miller multiplication) |\n\n## 6. What the circuit is good for\n\nIt is a **voltage buffer / impedance converter**: it presents a very high impedance to the driving source and a very low impedance to the load, delivering an in‑phase, slightly‑attenuated copy of V_in. R_S provides (i) the DC bias path, (ii) the AC load that sets the gain, and (iii) intrinsic negative feedback that stabilises the gain, cuts distortion, raises R_in and lowers R_out. It is **not** used for voltage amplification (gain < 1); use it to drive low‑impedance loads or to isolate stages.\n\n**Quick design checks:** choose R_S so that I_D·R_S keeps V_DS > V_GS − V_th (saturation) while leaving headroom for swing; ensure V_in (DC) exceeds V_th + I_D R_S so the device is on; the small‑signal gain then settles near 1 as g_m R_S ≫ 1.",
        "format": "markdown",
        "sha256": "108b373f6478e09136a06eb3fdb9d4d5c66066ad011f923a909098fba1559b48"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain as gm·RS/(1 + gm·RS), satisfying the full-credit rule.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 981,
        "output_tokens": 5563,
        "total_tokens": 6544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 981,
        "output_tokens": 5563,
        "total_tokens": 6544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit topology (as drawn)\n\nThe schematic contains exactly three electrical nodes that matter:\n\n* **V_DD** – the supply rail (top).\n* **V_out** – the node at the bottom of $R_D$ / one terminal of $M_1$ (the open port).\n* **V_in** – the gate of $M_1$.\n\nLooking at $M_1$ as a 3‑terminal device (the substrate arrow is drawn on the gate plate, i.e. **body is tied to gate** = $V_{in}$), its two channel terminals are:\n\n* one terminal → $V_{out}$\n* the other terminal → $V_{DD}$ (the wire that runs right and up to the rail)\n\nSo both $R_D$ **and** the channel of $M_1$ are connected between the *same two nodes*, $V_{out}$ and $V_{DD}$. They are in parallel. There is **no** connection from $V_{out}$ to ground or to any other potential – no load, no source, no bias path.\n\n## DC analysis (KCL at $V_{out}$)\n\nThe node $V_{out}$ has only two connections, both leading to $V_{DD}$. Suppose $V_{out} \\neq V_{DD}$.\n\n* If $V_{out} < V_{DD}$, the resistor carries $I_{R_D}=(V_{DD}-V_{out})/R_D$ **into** the node. For KCL to hold, $M_1$ would have to carry an equal current **out of** the node, i.e. from its $V_{out}$ terminal toward its $V_{DD}$ terminal. But a MOSFET channel always conducts conventional current from its *higher*‑potential terminal to its *lower*‑potential one (drain → source). Since $V_{DD}>V_{out}$, the higher‑potential terminal of $M_1$ is the $V_{DD}$ side, so any channel current flows *into* the node, in the **same** direction as $I_{R_D}$. Two currents enter, none leaves → KCL violated.\n* $V_{out} > V_{DD}$ is likewise impossible (no source above $V_{DD}$ exists to push current; both $R_D$ and $M_1$ would only draw current away from the node).\n\nTherefore the only consistent DC solution is\n\n$$\\boxed{V_{out} = V_{DD}, \\qquad I_{R_D}=0, \\qquad I_{M_1}=0}$$\n\nThis result is **independent of $V_{in}$** and of the device polarity (NMOS or PMOS): with $V_{DS}=V_{SD}=0$ the transistor cannot carry any current no matter what the gate overdrive is. If the gate condition happens to turn the device \"on\" ($V_{SG}>|V_{th}|$ for a PMOS, or $V_{GS}>V_{th}$ for an NMOS), it sits at the triode/saturation boundary with $V_{DS}=0$ and still conducts 0 A. So $M_1$ acts neither as a switch nor as an amplifier here – it is a parallel path that is itself held at $V_{DD}$ on both ends.\n\n## Small‑signal / functional view\n\nSince $V_{DD}$ is an AC ground, the small‑signal node $v_{out}$ is tied to ground through $R_D$ in parallel with the transistor's small‑signal drain–source resistance (finite $g_{ds0}$ if biased on, or $\\infty$ if off). The gate is driven by $v_{in}$ but draws no current, so it cannot inject any signal into $v_{out}$. Hence\n\n$$v_{out}=0 \\quad\\Rightarrow\\quad A_v = \\frac{v_{out}}{v_{in}} = 0 .$$\n\n## Conclusion\n\nAs drawn, the stage is **degenerate**: $R_D$ and the channel of $M_1$ both connect $V_{out}$ to $V_{DD}$, leaving no DC path to a lower potential. The output is therefore stuck at $V_{out}=V_{DD}$ for all $V_{in}$, with zero current through $R_D$ and through $M_1$, and the circuit provides no amplification or switching action.\n\nTo make this a working common‑source stage, the transistor and the load must connect $V_{out}$ to *different* rails – e.g. for an NMOS, tie the source (and substrate) to **ground** and keep $R_D$ from $V_{out}$ to $V_{DD}$; for a PMOS common‑source, the load at $V_{out}$ must go to **ground** (or a current sink) while the source stays at $V_{DD}$. With both elements tied to $V_{DD}$, the configuration shown cannot function.",
        "format": "markdown",
        "sha256": "4097046fb0b586e041b23344b1fb524581f83315c9ffb01a73eadcdbd8f8d330"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology: Vin is applied to M1's source, while its gate is DC-biased at VDD and AC-grounded. This is a common-gate stage with approximately +gm(RD || ro) gain, not a degenerate circuit with zero gain.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 13095,
        "total_tokens": 14042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 13095,
        "total_tokens": 14042,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12016,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology identification\n\nReading the symbol carefully:\n\n* The vertical bar that has **two** terminal connections (top = $V_{out}$, bottom = $V_{in}$) is the **channel** → these are the **drain** (top, under $R_D$) and the **source** (bottom, marked by the arrow).\n* The vertical bar that has **one** central connection (to $V_{DD}$) is the **gate plate** → the gate is tied to $V_{DD}$.\n* The arrow on the bottom (source) lead points **out of** the channel → **NMOS**.\n\nSo $M_1$ is an NMOS with gate at the fixed potential $V_{DD}$ (i.e. AC ground), signal applied at the **source**, and the output taken at the **drain** through the load $R_D$ to $V_{DD}$. This is a **common‑gate (common‑base) amplifier**. (A PMOS reading is inconsistent: with the source at $V_{in}$ it would be cut off for normal $V_{in}$, and an NMOS common‑source reading is impossible because there is no ground rail.)\n\n## 2. DC operating point (let $V_{in}=V_{IN}$)\n\n$$V_{GS}=V_G-V_S = V_{DD}-V_{IN}$$\n\nAssuming saturation (body effect neglected / body tied to source):\n\n$$I_D=\\tfrac{1}{2}k_n\\big(V_{DD}-V_{IN}-V_{th}\\big)^2,\\qquad k_n=\\mu_nC_{ox}\\tfrac{W}{L}$$\n\n$$V_{OUT}=V_{DD}-I_D\\,R_D$$\n\nDevice stays in saturation when $V_{DS}>V_{GS}-V_{th}$, i.e. $V_{OUT}>V_{DD}-V_{th}\\;\\Rightarrow\\; I_D R_D < V_{th}$ (the drop on $R_D$ must be small), and we also need $V_{DD}-V_{IN}>V_{th}$.\n\n## 3. Small‑signal model\n\n$V_{DD}$ is an AC ground, so $v_g=0$ and $v_s=v_{in}$, giving $v_{gs}=-v_{in}$.\n\nTransconductance:\n$$g_m = k_n(V_{DD}-V_{IN}-V_{th}) = \\frac{2I_D}{V_{OV}},\\quad V_{OV}=V_{DD}-V_{IN}-V_{th}$$\n\n## 4. Voltage gain\n\nKCL at the drain (with $r_o$):\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{R_D\\,(1+g_m r_o)}{R_D+r_o}\\;\\approx\\; g_m R_D\\quad (r_o\\!\\to\\!\\infty)$$\n\nThe gain is **positive (non‑inverting)** – the signature of the common‑gate. (If $V_{in}$ comes from a Thévenin source $v_{sig}$ with resistance $R_{sig}$, then $v_{in}=v_{sig}/(1+g_mR_{sig})$ and the overall gain is $\\approx g_mR_D/(1+g_mR_{sig})$.)\n\n## 5. Input resistance\n\nLooking into the source terminal (gate at AC ground, drain loaded by $R_D$):\n$$R_{in}=\\frac{r_o+R_D}{1+g_m r_o}\\;\\approx\\;\\frac{1}{g_m}\\quad\\text{(low)}$$\n\nHence the stage should be driven by a low‑impedance source.\n\n## 6. Output resistance\n\nLooking into the drain (source node at AC ground):\n$$R_{out}=R_D\\parallel\\big(r_o+\\tfrac{1}{g_m}\\big)\\;\\approx\\;R_D\\parallel r_o\\;\\approx\\;R_D$$\n\n## 7. Comments\n\n* **Bandwidth:** because the gate is at AC ground, the drain–gate capacitance sees no voltage gain across it → **no Miller multiplication**, so the common‑gate form is well suited to wideband / RF use.\n* **Trade‑offs:** very low $R_{in}$ (≈ $1/g_m$), moderate gain $g_mR_D$, non‑inverting phase, $R_{out}\\approx R_D$.\n* **Biasing note:** tying the gate to $V_{DD}$ forces a large $V_{GS}$; the saturation condition $I_DR_D<V_{th}$ limits the usable $R_D$ and $I_D$. If the substrate is connected to $V_{DD}$ instead of the source, a body effect ($V_{SB}=V_{DD}-V_{IN}$) raises $V_{th}$ and slightly reduces $g_m$; it was neglected above.\n\n**Summary:** the circuit is an **NMOS common‑gate amplifier** (gate at $V_{DD}$, $R_D$ as drain load, input at source, output at drain) with $A_v\\approx +g_mR_D$, $R_{in}\\approx 1/g_m$, $R_{out}\\approx R_D$.",
        "format": "markdown",
        "sha256": "e65aebb6a285c657c25a8baff7ab6ec88161aa470c5f57d430ed705305162045"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate topology, source input, positive gain, and input resistance near 1/gm. The optional output-resistance expression is incorrect for a source grounded in small signal: it should be RD || ro, though the stated approximation and main conclusion remain sound.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 15636,
        "total_tokens": 16583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 947,
        "output_tokens": 15636,
        "total_tokens": 16583,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic (terminal identification)\n\nThe node netlist is only **VDD**, **GND** (the implicit reference of the VDD and Vin supplies), **Vout** and **Vin**. Tracing the three leads of M1:\n\n| M1 terminal | Connected to | Role |\n|---|---|---|\n| Drain (top of channel bar) | **Vout** (top of R_D) | output node |\n| Gate (isolated bar) | **VDD** | AC‑ground bias |\n| Source (arrowed bar) | **Vin** | input node |\n\nSo the input is applied to the **source**, the **gate is tied to a DC node (VDD ⇒ AC ground)**, and the **drain** is loaded by R_D to VDD. This is a **common‑gate (NMOS) amplifier** – the classic cascode/buffer topology. (Note the unusual bias: the gate is at the top rail, so V_GS = VDD − Vin. With a normal 0…VDD input this keeps the NMOS on, since V_GS > Vth whenever Vin < VDD − Vth.)\n\n> If one instead (wrongly) takes Vin as the gate, then both the load R_D and the other transistor terminal sit at VDD, the drain–source loop has no driving source, and the device is forced off with **Vout = VDD for all Vin**. The arrowed source lead is what makes the stage a working common‑gate amplifier.\n\n## 2. DC / large‑signal analysis\n\nLet V_G = VDD, V_S = Vin, V_D = Vout.\n\n- **Overdrive:** V_GS = VDD − Vin.\n  - If V_GS ≤ Vth → M1 **off**, I_D = 0, **Vout = VDD**.\n  - If V_GS > Vth → M1 **on**.\n\n- **Saturation** (long‑channel):\n  I_D = ½ k_n (V_GS − Vth)² = ½ k_n (VDD − Vin − Vth)²\n  Vout = VDD − I_D·R_D\n  Saturation requires V_DS ≥ V_GS − Vth ⇔ Vout − Vin ≥ VDD − Vin − Vth ⇔ **I_D ≤ Vth / R_D**.\n\n- **Triode** (when I_D·R_D > Vth):\n  I_D = k_n [ (V_GS − Vth)V_DS − ½ V_DS² ], V_DS = Vout − Vin,\n  with Vout = VDD − I_D·R_D (solve the quadratic).\n\nSo Vout is a (non‑linear, non‑inverting) function of Vin; a higher Vin reduces V_GS, reduces I_D, and **raises** Vout toward VDD.\n\n## 3. Small‑signal model\n\nv_g = 0 (VDD is AC ground), v_s = v_in, v_d = v_out.\n\n- v_gs = v_g − v_s = −v_in\n- i_d = g_m·v_gs + (v_d − v_s)/r_o\n- Drain node (VDD is AC ground): v_out = −i_d·R_D\n\nSolving:\n\n**Gain** v_out / v_in = (R_D·g_m + 1) / (1 + R_D/r_o) ≈ **g_m·R_D**  (positive ⇒ **non‑inverting**)\n\nThis matches the common‑gate expectation: gain ≈ g_m R_D, phase preserved.\n\n## 4. Impedances and frequency response\n\n- **Input resistance** (looking into the source, driven by the ideal V_in source):\n  R_in ≈ 1/g_m  (more exactly (R_D + r_o)/(1 + g_m r_o) ≈ 1/g_m + R_D/r_o) → **low**.\n- **Output resistance** (looking into the drain with v_in = 0):\n  r_o, so R_out = R_D ∥ r_o ≈ **R_D** → **high**.\n- **Bandwidth / Miller effect:** Because the gate is at AC ground, C_gs appears as a simple shunt at the input and C_gd as a simple shunt at the output. **No Miller multiplication** occurs, so the stage is broadband – exactly why the common‑gate form is used inside cascodes and wide‑band buffers.\n\n## 5. Summary\n\nThe circuit is an **NMOS common‑gate amplifier**: gate biased at VDD (AC ground), signal injected at the source (Vin), output taken at the drain through R_D. It is **non‑inverting** with mid‑band gain ≈ g_m R_D, **low input impedance** (≈1/g_m), **high output impedance** (≈R_D), and **wide bandwidth** (no Miller effect). The DC operating point is set by V_GS = VDD − Vin; the device is in saturation as long as I_D R_D < Vth, and is cut off (Vout = VDD) when Vin > VDD − Vth.",
        "format": "markdown",
        "sha256": "e77ec8e274e7d2e6a838d991b3dbbb87c0cd0f7b8a7a14cadea3fccc2567356d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate stage and gives the non-inverting gain and low input resistance. The finite-ro input-resistance expansion has a dimensional typo, but the exact expression and essential analysis are correct.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 947,
        "output_tokens": 27897,
        "total_tokens": 28844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 947,
        "output_tokens": 27897,
        "total_tokens": 28844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What is connected where\n\n| Node / element | Connection |\n|---|---|\n| $V_{DD}$ | top rail, AC ground |\n| $R_D$ | from $V_{DD}$ to the drain of $M_1$ |\n| $V_{out}$ | taken at the drain of $M_1$ (top terminal) |\n| $M_1$ | n‑channel MOSFET, body tied to source; **gate** = $V_b$, **drain** = $V_{out}$ node, **source** = bottom node |\n| $V_b$ | DC gate bias (ideal source ⇒ AC ground) |\n| $C_1$ | couples $V_{in}$ to the **source** of $M_1$ |\n| bottom node | source of $M_1$ = right plate of $C_1$ = **ground** |\n\nSo the AC input is applied to the **source**, the gate is at AC ground, and the output is taken at the drain. That is the topology of a **common‑gate (CG) amplifier**.\n\n## 2. DC operating point\n\n$C_1$ blocks DC, and the source is tied to ground, so $V_S=0$. With $V_G=V_b$:\n\n$$V_{GS}=V_b,\\qquad I_D=\\tfrac{1}{2}k_n(V_b-V_{th})^2(1+\\lambda V_{DS}),\\quad k_n=\\mu_n C_{ox}\\tfrac{W}{L}$$\n$$V_{out}=V_D=V_{DD}-I_D R_D$$\n\nFor a valid bias: $V_b>V_{th}$ (device on) and $V_{DD}-I_D R_D \\ge V_b-V_{th}$ (saturation). $V_{in}$ carries no DC.\n\n## 3. Small‑signal analysis **as the figure is literally drawn**\n\nThe source node is connected **directly to ground**, and $V_b$ is an AC ground, so both $v_s=0$ and $v_g=0$. Hence $v_{gs}=0$. At the drain the only AC paths are $R_D$ and $r_o$ to AC ground, with no driving current:\n\n$$\\frac{v_{out}}{R_D}+\\frac{v_{out}}{r_o}=0 \\;\\Rightarrow\\; v_{out}=0,\\qquad A_v=\\frac{v_{out}}{v_{in}}=0$$\n\nWorse, $C_1$ puts an AC short across $V_{in}$ (left plate → $V_{in}$ → ground, right plate → source = ground). **Therefore, exactly as drawn, the input is short‑circuited and the stage provides no amplification.** A working CG stage must *not* AC‑ground its source; the source's DC‑bias path has to be high impedance (e.g. a current source), or the input source must be the only AC connection at that node.\n\n## 4. Small‑signal characteristics of the **intended** CG stage (source not AC‑grounded)\n\nIf the direct ground at the source is removed (or that ground symbol is merely the input‑source reference and not a node connection), then $v_s=v_{in}$, $v_{gs}=-v_{in}$, and:\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=(g_m+\\tfrac{1}{r_o})(R_D\\|r_o)\\approx g_m(R_D\\|r_o)}\\quad(\\text{non‑inverting})$$\n\n$$R_{in}=\\text{look into source}=\\frac{r_o+R_D}{1+g_m r_o}\\approx \\frac{1}{g_m}$$\n\n$$R_{out}=\\text{look into drain}=R_D\\|r_o$$\n\nwith $g_m=k_n(V_b-V_{th})=2I_D/(V_b-V_{th})$. The input coupling $C_1$ sets the low‑frequency pole; high‑frequency response is set by the gate‑drain and drain‑bulk capacitances.\n\n## 5. Summary\n\n* **Topology:** common‑gate amplifier with resistive load $R_D$; $V_b$ is the gate bias that sets $I_D$ and $g_m$.\n* **DC:** $V_S=0$, $V_{GS}=V_b$, $I_D=\\tfrac12 k_n(V_b-V_{th})^2$, $V_{out}=V_{DD}-I_D R_D$.\n* **As drawn:** the source is hard‑wired to ground, which shorts $V_{in}$ through $C_1$ and forces $v_{out}=0$ ⇒ **gain = 0** (degenerate/non‑functional).\n* **Intended circuit:** remove the AC short at the source; then $A_v\\approx g_m R_D$ (non‑inverting), $R_{in}\\approx 1/g_m$, $R_{out}\\approx R_D\\|r_o$.\n\nIn short, the schematic depicts a common‑gate stage, but the way the source node is tied to ground invalidates it as an amplifier; once that node is biased through a high impedance instead of a short, it behaves as a standard non‑inverting common‑gate amplifier.",
        "format": "markdown",
        "sha256": "6bc9d960aba9b71db84e4021f04a24392344d4e6f24acb981b60fdefdbcf4856"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly notices that the source is hard-shorted to ground, so the input is shorted and the ideal gain is zero. The extra discussion of an intended common-gate stage does not undermine that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1498,
        "output_tokens": 11802,
        "total_tokens": 13300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1498,
        "output_tokens": 11802,
        "total_tokens": 13300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10627,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe schematic is a **single‑ended common‑source (CS) amplifier** with a resistive load.\n\n| Node / element | Role |\n|---|---|\n| $M_1$ (NMOS – the body‑diode arrow points from body toward the channel, and the source is the lowest‑potential terminal) | Amplifying device, common‑source configuration |\n| $V_b$ | DC bias on the **gate** (sets the quiescent point; is an a.c. ground) |\n| $C_1$ | Input coupling capacitor – blocks DC so $V_b$ and $V_{in}$ don't fight, passes the signal |\n| $R_D$ | Drain (load) resistor – converts $i_d$ into $v_{out}$ |\n| Source | Tied to ground ⇒ no source degeneration, $v_{gs}=v_{in}$ |\n| $V_{out}$ | Taken at the drain |\n\nSo the gate sees $V_b + v_{in}$, the source is at 0 V, and the drain is pulled up to $V_{DD}$ through $R_D$.\n\n## D.C. (Q‑point) analysis\n\nWith $V_S=0$ and $V_G=V_b$:\n\n$$V_{GS}=V_b$$\n\nFor $M_1$ to be in **saturation** (required for linear amplification) two conditions must hold:\n\n1. $V_b > V_t$  (device ON)\n2. $V_{DS} > V_{GS}-V_t \\;\\Rightarrow\\; V_{out} > V_b - V_t$\n\nIn saturation (neglecting channel‑length modulation):\n\n$$I_D = \\tfrac{1}{2}\\,\\mu_n C_{ox}\\,\\tfrac{W}{L}\\,(V_b-V_t)^2$$\n\n$$V_{out}^{(Q)} = V_{DD} - I_D R_D$$\n\nThe **maximum undistorted output swing** is bounded by these limits:\n\n$$V_b - V_t \\;\\le\\; V_{out} \\;\\le\\; V_{DD}$$\n\n(i.e. the output cannot go below the saturation boundary, nor above $V_{DD}$). $V_b$ is therefore chosen so the Q‑point sits roughly in the middle of this window.\n\n## Small‑signal (midband) analysis\n\nAt signal frequencies $C_1$ is a short and $V_b$ is an a.c. ground, so $v_{gs}=v_{in}$ and the source is at a.c. ground. The drain current is\n\n$$i_d = g_m\\,v_{gs} = g_m\\,v_{in}$$\n\nwith\n\n$$g_m = \\frac{2I_D}{V_b-V_t} = \\sqrt{2\\,\\mu_n C_{ox}\\,\\tfrac{W}{L}\\,I_D}$$\n\nThis current flows into the parallel combination of $R_D$ and the transistor output resistance $r_o$, giving\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} = -\\,g_m\\,(R_D \\parallel r_o)}$$\n\n(The minus sign is the 180° phase inversion characteristic of the CS stage.) If $r_o$ is large, $A_v \\approx -g_m R_D$.\n\n* **Input impedance:** $Z_{in} \\to \\infty$ (MOS gate draws no a.c. current; only the source impedance in series with $C_1$ sets the low‑frequency input pole).\n* **Output impedance:** $Z_{out} = R_D \\parallel r_o$ (with $v_{in}=0$, $v_{gs}=0$, so the device looks like $r_o$ from drain to source).\n\n## Frequency response\n\n* **Low end:** $C_1$ together with the signal‑source resistance $R_{sig}$ forms a high‑pass pole at $f_{L,1}=1/(2\\pi R_{sig}C_1)$.\n* **High end:** the output node capacitance $C_L$ (plus the Miller‑multiplied $C_{gd}$ at the input) creates a low‑pass pole roughly at $f_H \\approx 1/[2\\pi (R_D\\parallel r_o) C_L]$; the gate–drain capacitance $C_{gd}$ further degrades $Z_{in}$ at high frequency through the Miller effect.\n\n## Summary\n\nThe circuit is a textbook **resistively loaded common‑source amplifier**: $C_1$ AC‑couples the input to the gate, $V_b$ sets the bias, the grounded source gives full transconductance, and $R_D$ provides the voltage gain $A_v=-g_m(R_D\\parallel r_o)$ with inverted phase. Proper design chooses $V_b$ so that $V_b>V_t$ and $V_{out}^{(Q)}$ lies inside $[V_b-V_t,\\;V_{DD}]$, keeping $M_1$ in saturation over the intended swing.",
        "format": "markdown",
        "sha256": "045784e33f098769f187e7c6f5ffc05b4ac7532728063a5f3f5122ddcd661344"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads the topology, placing the input at the gate. In the figure, the input is coupled to the source, which is directly shorted to ground, so the ideal gain from Vin is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1498,
        "output_tokens": 5181,
        "total_tokens": 6679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1498,
        "output_tokens": 5181,
        "total_tokens": 6679,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4072,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n| Node / element | Connection | Role |\n|---|---|---|\n| $V_{DD}$ → $R_D$ → $V_{out}$ | pull‑up / active load | sets DC bias point and converts drain current into $V_{out}$ |\n| Gate of $M_1$ → $V_b$ | DC‑only bias | fixes $V_{GS}$ and therefore the bias current; **AC ground** |\n| Drain of $M_1$ → $V_{out}$ | output node | taken through $R_D$ |\n| Source of $M_1$ → $C_1$ → $V_{in}$, and → ground | input node | $C_1$ blocks DC, passes the signal |\n\nThe signal enters at the **source**, the gate is at AC ground, and the output is taken at the **drain**. That is the defining topology of a **common‑gate amplifier** (the high‑frequency, non‑inverting cousin of the common‑source stage). The arrow on the bottom terminal and the fact that the drain (top) sits at a higher potential than the source confirm $M_1$ is an **NMOS**.\n\n## 2. DC operating point\n\nThe source is at 0 V, the gate at $V_b$, so\n\n$$I_D = \\tfrac{1}{2}\\,\\mu_n C_{ox}\\tfrac{W}{L}\\,(V_b - V_{th})^2 \\qquad (M_1 \\text{ in saturation})$$\n\n$$V_{out,\\,DC} = V_{DD} - I_D R_D$$\n\nSaturation requires $V_b > V_{th}$ and $V_{DD} - I_D R_D > V_b - V_{th}$; otherwise $M_1$ falls into the triode region and the linear gain below no longer holds.\n\n## 3. Important caveat about the drawing\n\nIn the figure the source node is tied **directly** to ground with a wire. If that is taken literally, the AC‑coupled input $C_1$ is shorted to ground, $v_s = 0$, hence $v_{gs}=0$, $i_d=0$ and $v_{out}=0$ → **zero gain**, and the input source sees a short. A functioning common‑gate stage needs the source to be the *input* node, i.e. the ground symbol should be the DC‑bias return (a bias current source or $R_S$), with the ideal input source driving that node. The standard analysis below assumes that intended interpretation (source node $= v_{in}$ at AC, gate and $V_{DD}$ at AC ground).\n\n## 4. Small‑signal parameters (intended common‑gate operation)\n\nWith $v_g = 0$, $v_s = v_{in}$, and the drain loaded by $R_D \\parallel r_o$:\n\n* **Voltage gain** (non‑inverting):\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{R_D(r_o+g_m r_o)}{R_D+r_o} = g_m\\,(R_D \\parallel r_o) \\;\\approx\\; g_m R_D \\quad (r_o\\!\\to\\!\\infty)$$\n\n* **Input resistance** (looking into the source):\n\n$$R_{in} = \\frac{R_D + r_o}{1 + g_m r_o} \\;\\approx\\; \\frac{1}{g_m}$$\n\n* **Output resistance** (set $v_{in}=0$ ⇒ source at AC ground, look into drain):\n\n$$R_{out} = R_D \\parallel r_o \\;\\approx\\; R_D$$\n\nBecause the gate is at AC ground there is **no Miller multiplication** of $C_{gs}$, which is why the common‑gate stage is the preferred front‑end at high frequency.\n\n## 5. Frequency response\n\n* **Low end** – $C_1$ together with the resistance it sees ($R_{in}+R_{sig} \\approx 1/g_m$ for an ideal source) forms a high‑pass pole:\n\n$$f_L = \\frac{1}{2\\pi (R_{in}+R_{sig})\\,C_1} \\approx \\frac{g_m}{2\\pi C_1}$$\n\n* **High end** – set by the output node capacitance (parasitics on $V_{out}$) against $R_{out}$:\n\n$$f_H \\approx \\frac{1}{2\\pi R_{out} C_{out}}$$\n\n## Summary\n\nThe stage is a **common‑gate NMOS amplifier**: bias fixed by $V_b$, load $R_D$, input coupled by $C_1$ to the source, output at the drain. It is **non‑inverting** with mid‑band gain $\\approx g_m R_D$, low input resistance $\\approx 1/g_m$, output resistance $\\approx R_D$, and excellent high‑frequency behaviour. The one point to flag is that the source node is drawn as a hard ground, which would short the AC input; in a real (or intended) implementation that node is the input node biased to ground through a finite impedance, and the formulas above then apply.",
        "format": "markdown",
        "sha256": "0a97f45006d480eb03735ad865980a278db881f7c7479686b3233d65a54c5c88"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It explicitly notices that the source is hard-shorted to ground and concludes the input is shorted, giving ideally zero gain. The later common-gate formulas are clearly conditional on a different, intended circuit.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1498,
        "output_tokens": 14679,
        "total_tokens": 16177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1498,
        "output_tokens": 14679,
        "total_tokens": 16177,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13525,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning (small‑signal / AC view):**\n\nA pole appears for every *independent dynamic node* (a node that has capacitance to AC ground and is not tied directly to an ideal voltage source).\n\nLooking at the AC topology:\n\n* **Source node of M1** – tied directly to ground. The capacitor $C_{SB}$ connects this node to ground, i.e. ground‑to‑ground, so it is shorted out and stores no independent energy. → *no pole.*\n* **Gate node (after $R_S$)** – has $C_{GS}$ to ground and $C_{GD}$ to the drain. → *1 dynamic node.*\n* **Drain node = $V_{out}$** – has $C_{DB}$ to ground and $C_{GD}$ to the gate, plus $R_D$ to AC ground. → *1 dynamic node.*\n* $V_{DD}$ and the left terminal of $R_S$ are AC‑grounded / driven, so they are not dynamic nodes.\n\nHence there are exactly **two** independent node voltages ($v_g$ and $v_d$) with associated capacitive dynamics. Writing the two node equations gives a $2\\times2$ matrix whose determinant is second order in $s$, so $V_{out}/V_{in}$ is a second‑order transfer function.\n\n(The feedback capacitor $C_{GD}$ couples the two nodes but does not add a third one; $C_{SB}$ is ineffective.)\n\n**∴ The circuit has 2 poles.**",
        "format": "markdown",
        "sha256": "db7b921031a91a174735a02b0e08866e09202874a48d5383360bed3460eb3072"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the capacitor count: CSB is shorted between grounded terminals, while the gate and drain form a two-node dynamic system with a second-order denominator.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1614,
        "output_tokens": 2548,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2209,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1614,
        "output_tokens": 2548,
        "total_tokens": 4162,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2209,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning (count the independent capacitive nodes, not the capacitors):**\n\nLabel the small‑signal nodes (AC ground = V_DD = V_in source side = GND):\n\n* **Gate node (G):** holds C_GS to ground and C_GD to the drain → one independent node voltage.\n* **Drain node (D):** holds C_DB to ground, C_GD to the gate, and R_D to AC ground → one independent node voltage.\n* **Source node (S):** is tied **directly to ground** in the schematic. Therefore C_SB has both of its plates at ground (S = GND), so it is short‑circuited and stores no signal charge → it contributes **no** state variable and **no** pole.\n\nThe capacitor voltages can all be written in terms of just two independent node voltages, v_G and v_D:\n\n* C_GS → v_G\n* C_GD → v_G − v_D\n* C_DB → v_D\n* C_SB → 0 (shorted)\n\nHence the network has **two independent energy‑storage variables**, so the transfer function V_out/V_in is second‑order.\n\nThis matches the expected behaviour of a common‑source stage with a grounded source: an input (gate) pole, an output (drain) pole, and a single Miller zero from C_GD.\n\n**Number of poles = 2.**",
        "format": "markdown",
        "sha256": "7bba00eb60b80a9215314500e132e29efd9d4624a2c0c9fbe7c5cd70b406a5b4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and accounts for the capacitors: CSB is shorted because the source is grounded, while CGS, CGD, and CDB have only two independent voltage variables.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1614,
        "output_tokens": 4721,
        "total_tokens": 6335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1614,
        "output_tokens": 4721,
        "total_tokens": 6335,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4410,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Three poles.**\n\n**Why.** In the small‑signal model the transistor has three signal nodes – gate (G), drain (D) and source (S) – and the capacitors are attached as follows:\n\n* C_GS from G to ground\n* C_GD from G to D\n* C_DB from D to ground\n* C_SB from S to ground\n\nEach of the three nodes therefore carries its own energy‑storage capacitor to ground (C_GS at G, C_DB at D, C_SB at S), so the gate, drain and source voltages are three independent state variables. Writing the nodal equations gives a 3×3 admittance matrix whose determinant is a polynomial of degree 3 in *s* (the *s*³ coefficient, proportional to (C_GS)(C_DB)(C_SB), is non‑zero). Hence the transfer function V_out/V_in has a cubic denominator → **3 poles**.\n\nEquivalently, by the capacitor‑loop rule: 4 capacitors − 1 capacitor loop (G–gnd–D–G formed by C_GS, C_DB, C_GD) = 3 independent storage elements = 3 poles.\n\nNote that the gate–drain (Miller) capacitance C_GD only couples the input and output nodes; it does **not** introduce an extra pole of its own.\n\n*(If the source were tied directly to AC ground instead, C_SB would be shorted out and the stage would reduce to the familiar two‑pole common‑source response. As drawn, with C_SB providing the source‑to‑ground path, the source is a distinct node and the circuit has **3 poles**.)*",
        "format": "markdown",
        "sha256": "caaa28730431884e82f8e9d706f1fdfc811f39d3a1dd5153e59f2513bee237f9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The circuit has two poles, not three: the source is grounded, so both terminals of C_SB are at ground and it stores no energy. The answer incorrectly treats the source as an independent node; its capacitor-counting argument therefore gives the wrong result.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1614,
        "output_tokens": 14662,
        "total_tokens": 16276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1614,
        "output_tokens": 14662,
        "total_tokens": 16276,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14305,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nM1 is an NMOS used as a **common‑source stage whose gate is driven by a voltage‑divider feedback taken from the output**. Reading the terminals:\n\n* **Drain** → node that also connects to the top of R_D and to V_out.\n* **Source** → V_in.\n* **Gate** → node V_F, the tap between R_1 and R_2.\n\nSo the input is applied at the *source*, the output is taken at the *drain*, and the output voltage is sampled by R_1–R_2 and returned to the *gate*. This makes it a **feedback amplifier**.\n\n## Feedback topology\n\n* **Sampling (output):** the divider senses a *voltage* (V_F = β·V_out) → **shunt (voltage) sampling**.\n* **Mixing (input):** the controlling variable is V_GS = V_F − V_in, i.e. the feedback voltage appears **in series** with the input around the gate–source loop → **series mixing**.\n\nHence the topology is **series–shunt (voltage–series) feedback = a non‑inverting voltage amplifier**.\n\nFeedback factor:\n\n$$\\beta = \\frac{V_F}{V_{out}} = \\frac{R_2}{R_1 + R_2}$$\n\n**Sign of the feedback (negative):** a positive bump in V_out raises V_F, raises V_GS, raises I_D, and the extra drop across R_D pulls V_out back down → the loop opposes the perturbation → **negative feedback**. The loop gain is\n\n$$T = A_0\\,\\beta \\approx g_m\\,R_L\\,\\beta,\\qquad R_L = R_D \\parallel (R_1+R_2)\\parallel r_o$$\n\nand we need |T| ≫ 1 for the ideal closed‑loop behaviour.\n\n## Closed‑loop gain\n\nWith v_in at the source, v_f = β v_out, v_gs = β v_out − v_in, and writing the drain‑node KCL (the divider loads the output as R_1+R_2 to AC ground):\n\n$$\\frac{v_{out}}{R_D}+\\frac{v_{out}}{R_1+R_2}+ \\big[g_m\\,v_{gs}+\\tfrac{v_{out}-v_{in}}{r_o}\\big]=0$$\n\nSolving for the gain:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m + 1/r_o}{\\,g_m\\beta + 1/r_o + 1/R_D + 1/(R_1+R_2)\\,}$$\n\nIn the high‑loop‑gain limit (g_m β ≫ the other terms, r_o large):\n\n$$\\boxed{A_v \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}}$$\n\nSo V_out is a **scaled, non‑inverted** copy of V_in, with the scale set entirely by the passive divider. (R_1 = 0 → unity gain; R_2 → 0 → no feedback, open‑loop gain.)\n\n## DC / biasing remark (important practical point)\n\nBecause the input is at the **source**, the input terminal is in the DC current path: the quiescent drain current I_D flows V_DD → R_D → drain → source → **into the V_in source**. Therefore the signal source at V_in must be able to **sink the bias current I_D**. The operating point is fixed by\n\n* V_out = V_DD − I_D R_D\n* V_G = β V_out\n* V_GS = V_G − V_in = β V_out − V_in\n* I_D = I_D(V_GS)   (device characteristic, e.g. saturation law)\n\nThe small‑signal gain above holds around this bias point.\n\n## Input and output impedances\n\n* **Output resistance** (feedback‑reduced):\n\n$$R_{out} = \\frac{1}{1/R_D + 1/(R_1+R_2) + g_m\\beta + 1/r_o} \\;\\approx\\; \\frac{1}{g_m\\beta}$$\n\ni.e. the series‑shunt feedback **lowers R_out**, improving the ability to drive a load at V_out.\n\n* **Input resistance:** it is **not** infinite (unlike a gate‑driven stage), because the input is at the source. The current the source must deliver equals the small‑signal drain current, giving\n\n$$R_{in} = \\frac{v_{in}}{i_{in}} \\approx \\beta\\,[R_D \\parallel (R_1+R_2)] \\quad (|T|\\!\\gg\\!1)$$\n\non top of the requirement that it pass the DC bias current.\n\n## Summary\n\nThe circuit is a **non‑inverting voltage amplifier** built from a drain‑loaded NMOS with **voltage‑series (series–shunt) negative feedback**. The R_1–R_2 divider sets the closed‑loop gain to **1 + R_1/R_2**, the feedback reduces the output resistance to about 1/(g_m β), and the unusual feature that the input is applied to the source means the input node carries the stage's quiescent current and presents a finite (not infinite) input resistance.",
        "format": "markdown",
        "sha256": "d1df683d11031ca2d6f56dc988398e5791772d9d867f73570b08d669fdbaa84b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source as the input, the output divider as gate feedback, and the feedback as negative. Its closed-loop gain approaches 1/β = 1 + R1/R2, satisfying the full-credit rule; optional impedance and bias discussion does not change that.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1383,
        "output_tokens": 13350,
        "total_tokens": 14733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1383,
        "output_tokens": 13350,
        "total_tokens": 14733,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12162,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n`M1` is an **n‑channel MOSFET wired as a common‑gate (CG) stage**:\n\n* **Source** → input terminal `V_in`\n* **Drain** → output node `V_out` (loaded by `R_D` to `V_DD`)\n* **Gate** → node `V_F`, the tap of the divider `R1`–`R2`\n\nThe decisive detail is *where the divider is connected*: it runs from **`V_out` to ground**, not from `V_DD` to ground. Because the gate draws no current,\n\n$$V_F = \\frac{R_2}{R_1+R_2}\\,V_{out} \\;\\triangleq\\; \\beta\\,V_{out}, \\qquad \\beta = \\frac{R_2}{R_1+R_2}$$\n\nso the gate voltage is a fraction of the *output*. This closes a **negative‑feedback loop** for both DC and AC. (With a pMOS the same topology would give *positive* DC feedback and the bias point would be unstable; the biasing polarity therefore also confirms `M1` is an nMOS.) The feedback is **voltage‑sampling at the output / series‑mixing at the gate = series–shunt (voltage‑series) feedback**, which is exactly why we will see a *higher* input resistance and a *lower* output resistance than a plain CG stage.\n\n---\n\n## 2. DC (bias) analysis\n\nLet $I_D$ be the drain current (the same current flows through $R_D$ and $M_1$). Then\n\n$$V_{out} = V_{DD} - I_D R_D$$\n$$V_{GS} = V_F - V_{in} = \\beta\\,(V_{DD} - I_D R_D) - V_{in}$$\n\nIn saturation $I_D = \\tfrac{K}{2}(V_{GS}-V_{th})^2$ with $K=\\mu_n C_{ox}(W/L)$, so the operating point is the physical root of\n\n$$\\boxed{\\,I_D = \\frac{K}{2}\\Big[\\,\\beta(V_{DD}-I_D R_D) - V_{in} - V_{th}\\Big]^2\\,}$$\n\n**Stabilisation (DC loop gain is negative):** if $V_{out}$ rises → $V_F$ rises → $V_{GS}$ rises → $I_D$ rises → drop on $R_D$ rises → $V_{out}$ falls. The operating point is therefore self‑stabilising and is *set by the resistors as much as by the device*.\n\n*Saturation check:* require $V_{GS}>V_{th}$ and $V_{out}-V_{in} \\ge V_{GS}-V_{th}$.\n\n---\n\n## 3. Small‑signal analysis\n\nSmall‑signal variables: $v_{in}$ (source), $v_{out}$ (drain), $v_g$ (gate). Since the gate is open, the divider still just divides the output: $v_g = \\beta v_{out}$, and the network $R_1{+}R_2$ simply appears as a shunt resistance $R_F = R_1+R_2$ from $v_{out}$ to ground.\n\nMOSFET (with output resistance $r_o$):\n\n$$i_d = g_m(v_g - v_{in}) + \\frac{v_{out}-v_{in}}{r_o} = g_m(\\beta v_{out}-v_{in}) + \\frac{v_{out}-v_{in}}{r_o}$$\n\nKCL at the output node (currents into $R_D$, into the drain, and into $R_F$ sum to zero):\n\n$$\\frac{v_{out}}{R_D} + \\frac{v_{out}}{R_F} + g_m(\\beta v_{out}-v_{in}) + \\frac{v_{out}-v_{in}}{r_o} = 0$$\n\n### Voltage gain\n\n$$\\boxed{\\;A_v \\equiv \\frac{v_{out}}{v_{in}} = \\frac{g_m + 1/r_o}{\\dfrac{1}{R_D}+\\dfrac{1}{R_F}+g_m\\beta + \\dfrac{1}{r_o}}\\;}$$\n\nNeglecting $r_o$ and writing $R_F=R_1+R_2$:\n\n$$\\boxed{\\;A_v = \\frac{g_m\\,R_F}{1 + \\dfrac{R_F}{R_D} + g_m R_2}\\;}$$\n\nThis is the standard CG gain $A_0 = g_m(R_D\\!\\parallel\\! R_F)$ reduced by the feedback loop: $A_v = A_0/(1+A_0\\beta)$. Two useful limits:\n\n* **No feedback** ($R_2\\to 0,\\ \\beta\\to0$): $A_v \\to g_m(R_D\\!\\parallel\\!R_1)$, the ordinary CG gain.\n* **Strong feedback** ($g_m\\to\\infty$): $A_v \\to \\dfrac{1}{\\beta} = \\dfrac{R_1+R_2}{R_2} = 1+\\dfrac{R_1}{R_2}$ — **the gain becomes set by the resistor ratio, independent of the transistor.**\n\nThe stage is **non‑inverting** (positive gain), as expected for a CG amplifier.\n\n### Input resistance (looking into the source)\n\n$$R_{in} \\approx \\frac{1}{g_m} + \\beta\\,(R_D\\!\\parallel\\! R_F) = \\frac{1}{g_m}\\,(1+A_0\\beta)$$\n\nFeedback *raises* the input resistance from $1/g_m$ toward $\\beta(R_D\\!\\parallel\\!R_F)$ (in the strong‑feedback limit $\\approx R_2$).\n\n### Output resistance (looking into $V_{out}$, $v_{in}=0$)\n\n$$R_{out} = \\frac{1}{\\dfrac{1}{R_D}+\\dfrac{1}{R_F}+g_m\\beta + \\dfrac{1}{r_o}} \\;\\approx\\; \\frac{R_D\\!\\parallel\\!R_F}{1+g_m\\beta\\,(R_D\\!\\parallel\\!R_F)}$$\n\nFeedback *lowers* the output resistance from $R_D\\!\\parallel\\!R_F$ (open loop) toward $1/(g_m\\beta)$ in the strong‑feedback limit.\n\n---\n\n## 4. Summary / design insights\n\n| Quantity | Open‑loop (gate AC‑grounded) | With feedback (this circuit) |\n|---|---|---|\n| $A_v$ | $g_m(R_D\\!\\parallel\\!R_F)$ | $A_0/(1+A_0\\beta)\\to 1/\\beta=1+R_1/R_2$ |\n| $R_{in}$ | $1/g_m$ | $\\tfrac{1}{g_m}(1+A_0\\beta)$ (↑) |\n| $R_{out}$ | $R_D\\!\\parallel\\!R_F$ | $R_{p}/(1+A_0\\beta)$ (↓) |\n\n* The CG topology gives a low, roughly source‑follower‑like input and a non‑inverting voltage gain.\n* Tapping the gate bias from **$V_{out}$ instead of $V_{DD}$** is what creates the feedback: it auto‑sets and stabilises the DC operating point, and in the high‑gain limit makes the **voltage gain a function of $R_1,R_2$ alone**, while boosting $R_{in}$ and cutting $R_{out}$ (classic series–shunt feedback behaviour).\n* The divider also loads the output by $R_1+R_2$, which is already included in $R_F$ above.\n\nIn short: **a self‑biased, negative‑feedback common‑gate amplifier whose gain, in the ideal (large $g_m$) case, is the resistor ratio $1+R_1/R_2$.**",
        "format": "markdown",
        "sha256": "acb2349565fbba8ffdf6502b3de55386e699d45d45371655042f2da550e625ec"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative feedback, and gives the correct closed-loop gain and large-loop-gain limit. The ancillary DC and resistance discussion is not required for full credit.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1383,
        "output_tokens": 12691,
        "total_tokens": 14074,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1383,
        "output_tokens": 12691,
        "total_tokens": 14074,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10868,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nReading the schematic node by node:\n\n* **V_DD – R_D – V_out** : a resistive pull‑up from the supply to the output node.\n* **M1** : a MOSFET whose **drain** is at V_out, **gate** at V_F, and **source** at V_in (the source terminal is the one carrying the body arrow). The arrow points *away* from the gate, so **M1 is an NMOS**.\n* **R1–R2** : a voltage divider whose *top* is connected to the output node V_out and whose bottom is ground; the tap is V_F. The gate of M1 draws no d.c. current, so\n\n$$V_F = \\frac{R_2}{R_1+R_2}\\,V_{out} \\;\\triangleq\\; \\alpha\\,V_{out},\\qquad 0<\\alpha<1$$\n\nHence the topology is a **common‑gate NMOS amplifier** (signal in at the source V_in, signal out at the drain V_out, load R_D) with a **drain‑to‑gate resistive feedback network** (R1, R2). The divider both loads the output and feeds a fixed fraction α of the output back to the gate.\n\n## D.C. analysis\n\nLet $V_I=V_{in}$ (d.c.), $V_O=V_{out}$ (d.c.), and $K_n=\\tfrac{1}{2}\\mu_n C_{ox}(W/L)$. The over‑drive is\n\n$$V_{OV}=V_{GS}-V_{tn}=\\alpha V_O - V_I - V_{tn}$$\n\nThe device conducts only if $V_{OV}>0$. The drain current (assume saturation) is $I_D=K_n V_{OV}^2$.\n\n**Saturation is guaranteed whenever the device is on.** Since $V_{DS}=V_O-V_I$,\n\n$$V_{DS}-V_{OV}=\\frac{1-\\alpha}{\\alpha}\\,(V_{OV}+V_{tn}+V_I)>0$$\n\nso M1 can never fall into triode while on – a direct consequence of the feedback.\n\n**KCL at the output node** (current from R_D = current into R1+R2 + current into the drain):\n\n$$\\frac{V_{DD}-V_O}{R_D}=\\frac{V_O}{R_1+R_2}+K_n\\,V_{OV}^2$$\n\nDefining the total output conductance $G_L=\\tfrac{1}{R_D}+\\tfrac{1}{R_1+R_2}$ and substituting $V_O=(V_{OV}+V_I+V_{tn})/\\alpha$ gives a quadratic for $V_{OV}$:\n\n$$\\frac{K_n\\alpha}{2}\\,V_{OV}^2+G_L\\,V_{OV}+G_L(V_I+V_{tn})-\\frac{\\alpha V_{DD}}{R_D}=0$$\n\nwhose positive root sets the quiescent $V_O$. Because $V_O$ depends on $V_I$, the stage is an **amplifier** (not a fixed reference); the feedback loop also locks in the d.c. operating point against process/temperature drift.\n\n## Small‑signal analysis\n\nWith $v_f=\\alpha v_{out}$, $v_{gs}=\\alpha v_{out}-v_{in}$, $v_{ds}=v_{out}-v_{in}$ and $i_d=g_m v_{gs}+v_{ds}/r_o$. The d.r. node equation $v_{out}\\!\\left(\\tfrac{1}{R_D}+\\tfrac{1}{R_1+R_2}\\right)+i_d=0$ yields the **voltage gain**\n\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_m+1/r_o}{G_L+\\alpha g_m+1/r_o}$$\n\n* Positive (non‑inverting, as expected for common‑gate).\n* For $g_m\\gg G_L$: $\\;A_v \\approx \\dfrac{1}{\\alpha}=\\dfrac{R_1+R_2}{R_2}=1+\\dfrac{R_1}{R_2}$.\n  → **The closed‑loop gain is set by the divider, independent of $g_m$.**\n\n**Output resistance** (set $v_{in}=0$, test at $V_{out}$):\n\n$$R_{out}=\\frac{1}{G_L+\\alpha g_m+1/r_o}\\approx \\frac{1}{\\alpha\\,g_m}\\ll \\frac{1}{G_L}$$\n\n**Input resistance** (looking into the source):\n\n$$R_{in}=-\\frac{1}{g_m(\\alpha A_v-1)+(A_v-1)/r_o}$$\n\nwhich tends to $1/g_m$ when $\\alpha\\to0$ (plain common‑gate) and to $\\alpha R_L$ for large $g_m$ with feedback.\n\n## Role of the feedback and special cases\n\nThe network samples the **output voltage** (shunt sampling) and injects it at the gate. A rise in $V_{out}$ raises $V_F$, raising $V_{GS}$ and $I_D$, which increases the drop on $R_D$ and pulls $V_{out}$ back down – **negative feedback** with loop gain $\\approx g_m\\alpha R_L$. Its effects: gain forced to $\\approx 1+\\!R_1/R_2$, output impedance reduced to $\\approx1/(\\alpha g_m)$, input impedance raised, linearity and bandwidth improved, and a stable, self‑set d.c. bias.\n\nLimiting cases: $R_1\\to\\infty$ ($\\alpha\\to0$) removes the feedback and the stage becomes a plain common‑gate amplifier with $A_v\\approx g_m R_L$; $R_2\\to\\infty$ ($\\alpha\\to1$) ties gate to drain, giving $A_v\\to1$.\n\n**Summary:** M1 is an NMOS in the common‑gate configuration, always in saturation when on, with a resistive drain‑to‑gate feedback divider. The circuit is a non‑inverting amplifier whose gain is approximately $1+R_1/R_2$, with low output resistance $\\approx1/(\\alpha g_m)$ and a low (common‑gate‑like) input resistance; the same feedback stabilizes the d.c. operating point.",
        "format": "markdown",
        "sha256": "1f298aa9604986f6c7064b19d9b6b370047203cbdbdfb34e1dfe982458666f45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback; its non-inverting gain expression is consistent with the golden result, including an optional finite-ro refinement. The other issues are in secondary DC or resistance details.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1383,
        "output_tokens": 16850,
        "total_tokens": 18233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1383,
        "output_tokens": 16850,
        "total_tokens": 18233,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15409,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\nBoth devices are **NMOS** (source arrow points out). Tracing the terminals:\n\n* **M1:** gate = $V_{in}$, drain = $V_{DD}$ (a.c. ground), **source = $V_{out}$**\n* **M2:** gate = $V_b$ (fixed bias), drain = $V_{out}$, source = GND\n\nSo the output is taken at the *source* of the input device M1, while M2 (gate at a fixed bias, source grounded) acts as a **saturated current‑source load / bias sink**.\n\n> **The circuit is a common‑drain (source‑follower) stage – i.e. a voltage buffer – loaded by a current source.** M1 provides the buffering; M2 sets the bias current (and therefore $g_{m1}$ and the output resistance).\n\n---\n\n## 2. D.C. analysis (both transistors in saturation)\n\nThe same current $I_D$ flows through both devices.\n\n$$I_{D2}=\\tfrac{1}{2}k_2(V_b-V_{th2})^2 \\quad\\text{(sets the bias current)}$$\n$$I_{D1}=\\tfrac{1}{2}k_1(V_{in}-V_{out}-V_{th1})^2$$\n\nEquating and solving gives the output level:\n\n$$\\boxed{V_{out}=V_{in}-V_{th1}-\\sqrt{\\tfrac{k_2}{k_1}}\\,(V_b-V_{th2})}$$\n\nHence $V_{out}$ follows $V_{in}$ with a fixed offset → **d.c. gain = +1**.\n\nRegion constraints:\n* M1 in saturation: $V_{DD}-V_{in}+V_{th1}>0$ (always true) and conduction requires $V_{in}-V_{out}>V_{th1}$.\n* M1 can never be in triode (its $V_{ds1}$ is large because the drain is at $V_{DD}$); it only *cuts off* at the top.\n* M2 in saturation: $V_{out}>V_b-V_{th2}$.\n\n---\n\n## 3. Small‑signal analysis\n\nAt the output node the load seen by M1's source is $r_{o2}$ (M2's drain resistance, since $V_b$ is a.c. ground), in parallel with $r_{o1}$ of M1. KCL at $v_{out}$:\n\n$$v_{out}\\!\\left(g_{m1}+\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}}\\right)=g_{m1}\\,v_{in}$$\n\n**Voltage gain**\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}(r_{o1}\\|r_{o2})}{1+g_{m1}(r_{o1}\\|r_{o2})}\\approx 1\\;(\\text{slightly }<1)}$$\n(Neglecting $r_o$'s gives exactly $+1$.)\n\n**Output resistance** (look into $v_{out}$ with $v_{in}=0$)\n$$\\boxed{R_{out}=\\frac{1}{g_{m1}+\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}}}\\approx \\frac{1}{g_{m1}}}$$\ni.e. a **low** output impedance – the hallmark of a buffer.\n\n**Input resistance**\n$$R_{in}=\\infty \\quad(\\text{gate of M1})$$\n\n**Body‑effect correction.** With the NMOS substrates tied to ground, M1 has $V_{SB}=V_{out}$, adding a $g_{mb1}$ path. This makes the gain < 1 even with infinite $r_o$'s:\n$$A_v\\approx \\frac{g_{m1}}{g_{m1}+g_{mb1}},\\qquad R_{out}\\approx \\frac{1}{g_{m1}+g_{mb1}}$$\n\n---\n\n## 4. Output swing\n\n$$V_{out,\\min}=V_b-V_{th2}\\quad(\\text{M2 leaves saturation})$$\n$$V_{out,\\max}=V_{in}-V_{th1}\\quad(\\text{M1 at edge of conduction})$$\n\nSo the usable swing is limited at the bottom by the M2 headroom and at the top by M1's $V_{GS}$; the stage cannot swing to $V_{DD}$ or to 0 V.\n\n---\n\n## 5. Summary\n\n| Parameter | Value |\n|---|---|\n| Configuration | Source follower (common‑drain) + current‑source load |\n| $A_v$ | $\\approx +1$ (a hair below unity) |\n| $R_{in}$ | $\\infty$ |\n| $R_{out}$ | $\\approx 1/g_{m1}$ (low) |\n| D.c. | $V_{out}=V_{in}-V_{th1}-\\sqrt{k_2/k_1}(V_b-V_{th2})$ |\n| Role of M2 | sets $I_D$ (hence $g_{m1}$, $R_{out}$ and the d.c. offset) |\n\nIn short, the circuit is a **unity‑gain voltage buffer**: it presents a very high input impedance and a very low output impedance, reproducing $V_{in}$ at $V_{out}$ with a small, fixed attenuation, while M2 supplies the quiescent current that fixes the operating point.",
        "format": "markdown",
        "sha256": "b4e6664ecb62b6db44e87dca8126d41f45b3c3433afcf26b796d71e29257aba5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as a current-source sink, with positive gain at or slightly below unity. It also includes the relevant body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1008,
        "output_tokens": 8532,
        "total_tokens": 9540,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1008,
        "output_tokens": 8532,
        "total_tokens": 9540,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Device identification and topology\n\nBoth transistors are **NMOS** (the source‑arrow is on the lower‑potential terminal in each case: V_out for M1 and ground for M2, consistent with current flowing from V_DD down to ground).\n\n| Node | Connection |\n|------|------------|\n| Top rail | V_DD (AC ground) |\n| M1 gate | V_in (signal) |\n| M1 drain | V_DD |\n| M1 source | V_out |\n| M2 gate | V_b (DC bias) |\n| M2 drain | V_out |\n| M2 source | ground (AC ground) |\n\nBecause the **signal enters the gate of M1 and the output is taken from its source** (drain at AC ground), M1 is a **common‑drain (source‑follower)**. M2, with a fixed gate bias V_b and grounded source, is a **saturated current‑source (active) load** that sets the bias current and presents a high impedance at V_out.\n\n> In short: *NMOS source‑follower with a current‑source load* – i.e. a **voltage buffer**.\n\n## 2. DC (bias) analysis\n\nOnly one current path exists, so\n\n$$I_{D1}=I_{D2}=I_D$$\n\nM2 (gate at V_b, source at 0) in saturation:\n\n$$I_D=\\tfrac{1}{2}\\,\\mu_n C_{ox}\\left(\\tfrac{W}{L}\\right)_2 (V_b-V_{th2})^2 \\qquad (V_{out}>V_b-V_{th2})$$\n\nThis same current flows in M1, which fixes its over‑drive and hence the DC output level:\n\n$$V_{GS1}=V_{th1}+\\sqrt{\\frac{2I_D}{\\mu_n C_{ox}(W/L)_1}}$$\n$$\\boxed{V_{out}=V_{in}-V_{GS1}}$$\n\nSo V_out is just a DC‑level‑shifted copy of V_in. **Conditions for valid operation**\n\n* M1 on & saturated: $V_{in}-V_{out}>V_{th1}$ and $V_{DD}-V_{out}\\ge V_{GS1}-V_{th1}$.\n* M2 saturated: $V_{out}\\ge V_b-V_{th2}$ (and $V_b>V_{th2}$).\n\nThese give the output swing roughly from $V_b-V_{th2}$ (low end, M2 leaves saturation) up to $V_{DD}-V_{ov1}$ (high end, M1 enters triode).\n\n## 3. Small‑signal analysis\n\nKilling the DC sources: V_DD and V_b become AC grounds, so the small‑signal circuit at V_out is M1 (gate = v_in, drain = ground, source = node) in parallel with M2's drain impedance $r_{o2}$.\n\nWriting KCL at the V_out node with $R_L = r_{o1}\\parallel r_{o2}\\parallel R_{ext}$:\n\n$$v_{out}\\left(\\frac{1}{r_{o1}}+\\frac{1}{r_{o2}}\\right) = g_{m1}(v_{in}-v_{out})$$\n\n**Voltage gain**\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}R_L}{1+g_{m1}R_L}\\;\\approx\\;1 \\quad (g_{m1}R_L\\gg1)}$$\n\nNon‑inverting, magnitude slightly below 1. (A common‑*source* stage would invert and have large gain; the fact that the output is at M1's *source* is what makes this a follower.)\n\n**Input impedance** – the gate of M1: $R_{in}\\to\\infty$ (only the parasitic $C_{gs1}+C_{gd1}$ load it).\n\n**Output impedance** (look into V_out, $v_{in}=0$):\n\n$$R_{out}=\\frac{1}{g_{m1}}\\parallel r_{o1}\\parallel r_{o2}\\;\\approx\\;\\frac{1}{g_{m1}}$$\n\nlow, because the source‑follower's intrinsic resistance $1/g_{m1}$ dominates.\n\n## 4. Frequency response\n\n* The dominant pole is at the output node: $f_{P}\\approx \\dfrac{1}{2\\pi R_{out} C_{L}}$, where $C_L$ lumps $C_{ds1},C_{db2},C_{gd2}$ and any external load capacitance. Since $R_{out}\\approx1/g_{m1}$, the bandwidth is wide.\n* The Miller penalty on $C_{gd1}$ is negligible because the gain is ≈ +1 (the gate–drain voltage $v_{gd1}\\approx0$), so the input node is not loaded by a multiplied capacitance.\n\n## 5. Function / why build it this way\n\n* **High $R_{in}$, low $R_{out}$, $A_v\\approx1$** → ideal for **buffering / impedance matching**: it can drive a low‑impedance load (or a heavy capacitive load) without loading the preceding stage.\n* The **current‑source load M2** (instead of a resistor) (a) sets a precise bias current $I_D$, (b) provides a large AC resistance $r_{o2}$ at the output, and (c) frees up $V_{DD}$ headroom because no resistive drop is needed for bias.\n* Trade‑off: a follower cannot amplify voltage and its output swing is clipped at the top by M1 entering triode and at the bottom by M2 leaving saturation.\n\n### Summary\nThe circuit is a **common‑drain (source‑follower) stage**: M1 is the driver, M2 is a fixed‑bias current‑source load. It delivers $A_v\\simeq +1$, $R_{in}\\to\\infty$, $R_{out}\\simeq 1/g_{m1}$, with $V_{out}=V_{in}-V_{GS1}$ at DC – i.e. a high‑impedance‑in / low‑impedance‑out **voltage buffer**.",
        "format": "markdown",
        "sha256": "418826b2613485f2ee76e773c8e903df732508b7fb49b0c606ff49c86b3453b6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its current-source load, with a non-inverting gain near unity and below one. The omitted body-effect term is a refinement, not a central error.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1008,
        "output_tokens": 8738,
        "total_tokens": 9746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1008,
        "output_tokens": 8738,
        "total_tokens": 9746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nBoth devices are **NMOS** transistors (source arrow points outward). Tracing the terminals:\n\n* **M₁** – gate = $V_{in}$, drain = $V_{DD}$, **source = $V_{out}$** (the arrowed terminal).\n* **M₂** – gate = $V_b$ (DC bias), source = GND, drain = $V_{out}$.\n\nBecause the input signal is applied to the **gate** of M₁ and the output is taken from its **source** (with its drain tied to the AC‑ground supply), **M₁ is a common‑drain (source‑follower) stage**. M₂, whose gate is fixed at a bias voltage, is a **saturated current source that acts as the active load** at the follower's source. The chain therefore is:\n\n$$V_{DD} \\;\\xrightarrow{M_1}\\; V_{out} \\;\\xrightarrow{M_2}\\; \\text{GND}$$\n\nThe circuit is a **voltage buffer / level shifter** with an active load.\n\n## DC operating point\n\nM₂ sets a fixed current (saturation, neglecting $\\lambda$ first):\n\n$$I_{D}=\\tfrac{1}{2}\\mu_n C_{ox}\\!\\left(\\tfrac{W}{L}\\right)_2 (V_b - V_{th2})^2 = I_{\\text{bias}}$$\n\nM₁ carries the same current with $V_{GS1}=V_{in}-V_{out}$, so\n\n$$V_{out}=V_{in}-V_{GS1}=V_{in}-V_{th1}-\\sqrt{\\tfrac{2I_{\\text{bias}}}{\\mu_n C_{ox}(W/L)_1}}$$\n\nHence $V_{out}$ is a DC‑shifted copy of $V_{in}$ (lower by about $V_{GS1}$), and $V_{out}$ **tracks $V_{in}$** – the follower action.\n\n**Region‑of‑operation constraints**\n\n* M₂ in saturation: $\\;V_{out} \\ge V_b - V_{th2}$\n* M₁ in saturation: $\\;V_{DD}-V_{out} \\ge V_{GS1}-V_{th1}\\;\\Rightarrow\\; V_{DD} \\ge V_{in}-V_{th1}$\n* M₁ ON: $\\;V_{in}-V_{out} > V_{th1}$\n\n## Small‑signal analysis\n\nAc model: M₁ gate = $v_{in}$, source = $v_{out}$, drain = ac gnd; M₂ has $v_{gs2}=0$, so it appears as just $r_{o2}$ from $v_{out}$ to ground.\n\nCurrent delivered into the $v_{out}$ node by M₁: $g_{m1}v_{in} - v_{out}\\!\\left(g_{m1}+\\tfrac{1}{r_{o1}}\\right)$\nCurrent sunk by M₂: $v_{out}/r_{o2}$\n\n**Voltage gain** (no external load):\n\n$$\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}}{g_{m1}+\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}}}=\\frac{g_{m1}(r_{o1}\\|r_{o2})}{1+g_{m1}(r_{o1}\\|r_{o2})}\\;\\approx\\;1$$\n\n(non‑inverting, slightly less than unity).\n\n**Output resistance** (look into $V_{out}$, $v_{in}=0$):\n\n$$R_{out}=\\frac{1}{g_{m1}+\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}}}=\\frac{1}{g_{m1}}\\,\\|\\,r_{o1}\\,\\|\\,r_{o2}\\;\\approx\\;\\frac{1}{g_{m1}}$$\n\n**Input resistance:** $R_{in}\\to\\infty$ (MOS gate).\n\nSo the stage offers **near‑unity gain, very high input impedance, and low output impedance** – the classic buffer behavior.\n\n## Output swing\n\n* $V_{out,\\min}$ is set by M₂ leaving saturation: $\\;V_{out,\\min}\\approx V_b - V_{th2}$\n* $V_{out,\\max}$ is set by M₁ entering triode: $\\;V_{out,\\max}\\approx V_{DD} - V_{OV1}$, where $V_{OV1}=\\sqrt{2I_{\\text{bias}}/[\\mu_n C_{ox}(W/L)_1]}$\n\n$$\\boxed{V_b - V_{th2} \\;\\le\\; V_{out} \\;\\le\\; V_{DD} - V_{OV1}}$$\n\n## Summary\n\nThe figure is a **source follower (common‑drain) buffer** in which M₁ (driven by $V_{in}$) performs the following action and M₂ (biased by $V_b$) provides a low‑impedance, constant‑current load. It delivers a non‑inverted, ≈unity‑gain output with a small DC offset $(-V_{GS1})$, high input impedance, and output impedance $\\approx 1/g_{m1}$, making it suitable as an impedance‑matching / level‑shifting buffer.",
        "format": "markdown",
        "sha256": "698e7a4db501cfe75738ef3f23d3b0325d44273cb9c43e06c40b9cf7ed7dc35d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower with M2 as its current-source load and gives a positive gain slightly below unity. The small-signal expression omits body effect, but the essential conclusion is correct.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1008,
        "output_tokens": 6806,
        "total_tokens": 7814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5596,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1008,
        "output_tokens": 6806,
        "total_tokens": 7814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5596,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe schematic is a **CMOS (complementary MOS) inverter** – the basic static‑logic gate.\n\n| Node | Connection |\n|------|------------|\n| $V_{in}$ | Common **gate** of M1 (NMOS) and M2 (PMOS) |\n| $V_{out}$ | Common **drain** of M1 and M2 |\n| M1 source | Ground (0 V) |\n| M2 source | $V_{DD}$ |\n\nThe two transistors form a \"pull‑down network\" (NMOS to ground) in series with a \"pull‑up network\" (PMOS to $V_{DD}$), both controlled by the same input. Because the PMOS is the complement of the NMOS (one is ON whenever the other is OFF), the gate is *complementary*.\n\n## DC operation (truth table)\n\n| $V_{in}$ | $V_{GS1}$ (NMOS) | $V_{SG2}$ (PMOS) | M1 | M2 | $V_{out}$ |\n|:---:|:---:|:---:|:---:|:---:|:---:|\n| 0 (L) | $0 < V_{TN}$ | $V_{DD} > |V_{TP}|$ | OFF | ON | $V_{DD}$ (H) |\n| $V_{DD}$ (H) | $V_{DD} > V_{TN}$ | $0 < |V_{TP}|$ | ON | OFF | 0 (L) |\n\nSo in the static (logic) region the gate performs **$V_{out} = \\overline{V_{in}}$**, with a full rail‑to‑rail swing (0 → $V_{DD}$). This full swing is the key advantage over resistive‑load or depletion‑load inverters: the transistors act as near‑zero‑resistance switches, not as voltage dividers.\n\n## Transfer characteristic $V_{out}(V_{in})$\n\n- $0 \\le V_{in} < V_{TN}$: M1 off, M2 on (linear region) → $V_{out} = V_{DD}$.\n- $V_{DD}-|V_{TP}| < V_{in} \\le V_{DD}$: M2 off, M1 on (linear region) → $V_{out} = 0$.\n- Intermediate region: **both** devices conduct, usually in saturation. $V_{out}$ falls steeply from $V_{DD}$ to 0. This is the *transition* (or linear) region; its width $\\Delta V = V_{in,H} - V_{in,L}$ decreases as the gain increases.\n\nThe small‑signal gain in the transition region (both saturated) is\n\n$$A_v = -\\frac{1}{\\frac{1}{g_{m1}} + \\frac{1}{g_{m2}}} \\,(r_{ds1}\\parallel r_{ds2}) \\;\\approx\\; -g_m (r_{ds1}\\parallel r_{ds2}) \\ll 1 \\text{ in magnitude (large gain)},$$\n\nwhich is what makes the transition sharp.\n\n**Switching (mid‑threshold) voltage $V_M$**, found by equating the two saturation currents when $V_{out}$ is such that both are saturated:\n\n$$\\tfrac{1}{2}k_n (V_M - V_{TN})^2 = \\tfrac{1}{2}k_p (V_{DD} - V_M + V_{TP})^2$$\n\nFor a symmetric design ($k_n \\approx k_p$, $|V_{TN}|=|V_{TP}|$) this gives $V_M \\approx V_{DD}/2$.\n\n## Noise margins\n\nWith $V_{M,H}$ and $V_{M,L}$ the input voltages at which gain = 1:\n\n$$NM_L = V_{M,L} - V_{OL}, \\qquad NM_H = V_{OH} - V_{M,H}$$\n\nFor a symmetric inverter, $NM_L \\approx NM_H \\approx (V_{DD} - V_M)/2$, which is large → high noise immunity.\n\n## Power and signal properties\n\n- **Static (DC) power ≈ 0.** In either logic state one transistor is OFF, so there is *no DC path* from $V_{DD}$ to ground (only sub‑threshold/gate leakage). This is the defining advantage of CMOS.\n- **Dynamic power** occurs only during switching, when both devices are briefly ON and a short‑circuit (crowbar) current $I_{sc}$ flows from $V_{DD}$ to ground: $P_{dyn} \\approx C_L V_{DD}^2 f + I_{sc} V_{DD} f$.\n- **Input impedance ≈ ∞** (only the gate‑oxide capacitance $C_{gs}$); no DC input current.\n- **No body effect:** NMOS source = bulk = 0 V, PMOS source = bulk = $V_{DD}$, so $V_{SB}=0$ for both and the thresholds are the nominal ones.\n- **Output resistance** in each state is the ON resistance of the conducting device ($r_{on1}$ or $r_{on2}$); together they set the 3‑dB bandwidth $f_{-3dB} \\approx 1/(2\\pi (r_{ds1}\\parallel r_{ds2}) C_L)$.\n\n## Summary\n\nThe figure is the canonical **CMOS inverter**: an NMOS pull‑down (M1) and a PMOS pull‑up (M2) sharing a common gate ($V_{in}$) and a common drain ($V_{out}$). It inverts the input with a full 0‑to‑$V_{DD}$ swing, very high gain and steep transition, near‑zero static power dissipation, infinite input impedance, and wide noise margins – which is why it is the fundamental building block of essentially all modern digital and mixed‑signal integrated circuits.",
        "format": "markdown",
        "sha256": "4fac2a710360852fc987b08280bbbc242741b22dfb3570d12c31f85cc500f6d0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down, PMOS pull-up, and inverting static operation, satisfying the golden full-credit rule. The supplemental analog details do not overturn that essential result.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 2984,
        "total_tokens": 3268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 2984,
        "total_tokens": 3268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1661,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nThe schematic is a **complementary CMOS inverter (inverting buffer)**.\n\n| Device | Type | Source tied to | Drain tied to | Gate tied to |\n|--------|------|----------------|---------------|--------------|\n| M2 | **PMOS** (pull‑up) | $V_{DD}$ | $V_{out}$ | $V_{in}$ |\n| M1 | **NMOS** (pull‑down) | GND | $V_{out}$ | $V_{in}$ |\n\nThe body‑arrows in the symbol confirm this: M2 (arrow toward the gate, source at the high rail) is PMOS, M1 (arrow away from the gate, source at the low rail) is NMOS. Both gates are driven by $V_{in}$ and the two drains are common‑connected at $V_{out}$ — the classic inverter topology.\n\nKey topological features:\n* **Inverting** input–output relation.\n* **Full rail‑to‑rail** output swing ($0 \\leftrightarrow V_{DD}$).\n* **Very high input impedance** (only gate oxides draw current).\n* **Strong output drive** near both rails (the \"on\" transistor is in the triode region → low $R_{on}$).\n\n## 2. Steady‑state (DC) operation — truth table\n\n| $V_{in}$ | M1 (NMOS) | M2 (PMOS) | $V_{out}$ | Logic |\n|----------|-----------|-----------|-----------|-------|\n| Low (0)  | OFF       | ON        | $V_{DD}$  | 1 |\n| High ($V_{DD}$) | ON    | OFF       | 0         | 0 |\n\n* $V_{in}=0$: $V_{GS1}=0<V_{TN}$ → M1 off; $V_{SG2}=V_{DD}>|V_{TP}|$ → M2 on, no $R_{DS}$ drop → $V_{out}=V_{DD}$.\n* $V_{in}=V_{DD}$: M1 on, M2 off ($V_{SG2}=0<|V_{TP}|$) → $V_{out}=0$.\n\n## 3. DC voltage‑transfer characteristic (VTC)\n\nLet $V_{TN}>0$ (NMOS threshold) and $V_{TP}<0$ (use $|V_{TP}|$).\n\nDevice conditions:\n* M1: ON if $V_{in}>V_{TN}$; **sat** if $V_{out}>V_{in}-V_{TN}$; **triode** if $V_{out}<V_{in}-V_{TN}$.\n* M2: ON if $V_{in}<V_{DD}-|V_{TP}|$; **sat** if $V_{out}<V_{in}+|V_{TP}|$; **triode** if $V_{out}>V_{in}+|V_{TP}|$.\n\nAs $V_{in}$ rises from 0, $V_{out}$ falls from $V_{DD}$ through five regions:\n\n| Region | $V_{in}$ range | M1 | M2 | $V_{out}$ |\n|--------|---------------|----|----|-----------|\n| I  | $0 \\le V_{in} < V_{TN}$ | Off | Triode | $=V_{DD}$ (flat, logic H) |\n| II | $V_{TN} < V_{in} < V_{in}^{(II\\to III)}$ | Sat | Triode | falling |\n| III | around mid‑transition | Sat | Sat | falling (steepest slope) |\n| IV | $V_{in}^{(III\\to IV)} < V_{in} < V_{DD}-|V_{TP}|$ | Triode | Sat | falling |\n| V  | $V_{DD}-|V_{TP}| < V_{in} \\le V_{DD}$ | Triode | Off | $=0$ (flat, logic L) |\n\n* The transition (regions II–IV) is narrow; the **maximum (negative) gain** occurs in region III where both devices are in saturation:\n$$\\left|\\frac{dV_{out}}{dV_{in}}\\right|_{max} \\approx \\frac{g_{m1}+g_{m2}}{g_{ds1}+g_{ds2}} \\gg 1 .$$\n* The **switching (inversion) threshold** $V_M$ is the point where $V_{in}=V_{out}$. For a symmetric inverter ($k_n=k_p,\\ |V_{TP}|=V_{TN}$), $V_M = V_{DD}/2$.\n\n## 4. Noise margins\n\nBecause the VTC has flat top/bottom and a steep middle, the high and low noise margins are large. For the symmetric case they are approximately equal:\n$$NM_H \\approx NM_L \\approx \\tfrac{1}{2}\\big(V_{DD}-V_{out}^{(H)}\\big) \\approx \\tfrac{1}{2}\\big(V_{out}^{(L)}=0\\ \\text{side}\\big),$$\ni.e. each ≈ $V_{DD}/4$–$V_{DD}/2$ depending on the 0.707/0.293 gain criteria — typically a substantial fraction of $V_{DD}$, giving excellent noise immunity.\n\n## 5. Power and switching behaviour\n\n* **Static power:** ideally **zero** — in either DC state exactly one transistor is off, so no DC path exists from $V_{DD}$ to GND. (In real CMOS, only sub‑threshold and gate‑leakage currents remain.)\n* **Dynamic power:** during a transition both M1 and M2 are briefly on, creating a **short‑circuit (crowbar) current** from $V_{DD}$ to GND. This, plus the charge/discharge of the load capacitance $C_L$, is the dominant power term: $P \\approx \\alpha C_L V_{DD}^2 f$.\n* **Switching action:** $V_{in}$ low→high turns M1 on and *discharges* $C_L$ through it; $V_{in}$ high→low turns M2 on and *charges* $C_L$. Propagation delays are set by $R_{on}$ of the driving transistor and $C_L$.\n\n## 6. Summary\n\nThe circuit is a **CMOS inverter**: a PMOS pull‑up (M2) and an NMOS pull‑down (M1) with gates tied to $V_{in}$ and drains tied to $V_{out}$. It produces a clean, rail‑to‑rail, inverted output, has very high input impedance, large noise margins, and (ideally) zero static power dissipation, making it the fundamental logic gate of CMOS digital design.",
        "format": "markdown",
        "sha256": "39badf49c2c268f919e87d31306d0176d0ce348653dc534cd5e3af835f142607"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and reads M2 as the PMOS pull-up and M1 as the NMOS pull-down, with the correct input/output connections and inversion. The optional analysis does not contradict the inverter’s operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 4816,
        "total_tokens": 5100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 4816,
        "total_tokens": 5100,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThe two MOSFETs form a **complementary (CMOS) inverter**. The drawing is just the standard inverter drawn with the PMOS on top and the NMOS on the bottom; the arrows identify the sources (and, in a 3‑terminal symbol, the internal body tie).\n\n| Terminal | M₁ (NMOS) | M₂ (PMOS) |\n|----------|-----------|-----------|\n| Gate | $V_{in}$ | $V_{in}$ |\n| Source | GND (0 V) | $V_{DD}$ |\n| Drain | $V_{out}$ | $V_{out}$ |\n| Body / substrate | GND | $V_{DD}$ |\n\nBoth **gates** are tied together at the input, both **drains** are tied together at the output, and the **sources** go to the two supplies. Each body is tied to its own source, so $V_{SB}=0$ for both devices and there is **no body effect** – the thresholds stay at $V_{tn}$ and $|V_{tp}|$.\n\n## DC operation (logic states)\n\n| $V_{in}$ | M₁ (NMOS) | M₂ (PMOS) | $V_{out}$ |\n|----------|-----------|-----------|-----------|\n| 0 (L) | OFF ($V_{GS}=0<V_{tn}$) | ON ($V_{SG}=V_{DD}>|V_{tp}|$, triode) | $V_{DD}$ (H) |\n| $V_{DD}$ (H) | ON ($V_{GS}=V_{DD}>V_{tn}$, triode) | OFF ($V_{SG}=0<|V_{tp}|$) | 0 (L) |\n\nIn each state **one device is open and the other is a low‑resistance (triode) path** to a rail, so the output is driven *exactly* to the rail voltage: $V_{OL}=0$, $V_{OH}=V_{DD}$. Because one transistor is always cut off, **static (DC) power dissipation is zero** – the only power drawn is the short VDD→GND path that exists during the transition (switching power).\n\n## Voltage transfer characteristic (VTC)\n\nAs $V_{in}$ sweeps from 0 to $V_{DD}$, $V_{out}$ sweeps from $V_{DD}$ to 0, with five regions (let $V_{in}^{*}$ be the input at which the two saturation currents are equal, $\\sqrt{k_n}(V_{in}^{*}-V_{tn})=\\sqrt{k_p}(V_{DD}-V_{in}^{*}-|V_{tp}|)$):\n\n1. **$0\\le V_{in}\\le V_{tn}$** – M₁ cut off, M₂ in triode → $V_{out}=V_{DD}$ (flat top).\n2. **$V_{tn}<V_{in}<V_{in}^{*}$** – M₁ in saturation, M₂ in triode → $V_{out}$ falls.\n3. **$V_{in}\\approx V_{in}^{*}$** – **both in saturation.** This is the high‑gain region; with the ideal square‑law it is a vertical segment (infinite gain), and with channel‑length modulation it becomes a steep ramp.\n4. **$V_{in}^{*}<V_{in}<V_{DD}-|V_{tp}|$** – M₁ in triode, M₂ in saturation → $V_{out}$ falls toward 0.\n5. **$V_{DD}-|V_{tp}|<V_{in}\\le V_{DD}$** – M₂ cut off, M₁ in triode → $V_{out}=0$ (flat bottom).\n\nThe function is monotonically decreasing → the circuit **inverts**.\n\n## Small‑signal (voltage) gain\n\nLinearising at the both‑saturation point (the steepest part), with $r_{o1},r_{o2}$ the output resistances and $g_{m1},g_{m2}$ the transconductances, KCL at the open output node gives\n\n$$A_v=\\frac{v_{out}}{v_{in}}=-(g_{m1}+g_{m2})\\,(r_{o1}\\parallel r_{o2})$$\n\ni.e. a large negative gain, confirming the steep, inverting transition. (In the ideal model $r_o\\to\\infty$ makes this gain infinite, matching the vertical VTC segment.)\n\n## Noise margins\n\n$V_{IL}$ and $V_{IH}$ are the input voltages where the slope $dv_{out}/dv_{in}=-1$ (in regions 2 and 4 respectively). For a **symmetric** design ($k_n=k_p,\\ V_{tn}=|V_{tp}|$) the VTC is symmetric about $(V_{DD}/2,\\,V_{DD}/2)$, which yields\n\n$$V_{IL}=V_{DD}-V_{IH}\\quad\\Rightarrow\\quad NM_L=V_{IL}=NM_H=V_{DD}-V_{IH}$$\n\nso the low and high noise margins are equal and, for a properly sized inverter, close to $V_{DD}/2$.\n\n## Summary\n\nThe figure is a **two‑transistor CMOS inverter**: gates common at $V_{in}$, drains common at $V_{out}$, sources (and bodies) tied to the rails. It produces a full‑swing, zero‑static‑power, inverting output, with a high‑gain transition when both devices are simultaneously in saturation.",
        "format": "markdown",
        "sha256": "0fc18404affd6ee2e6feeb6f85319adc2dd056708b01584fbba799f9e4b6d8dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the standard CMOS inverter with an NMOS pull-down and PMOS pull-up; the supplemental analysis does not contradict its essential operation.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 15634,
        "total_tokens": 15918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 15634,
        "total_tokens": 15918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14389,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology (what the netlist actually is)\n\nReading the nodes off the figure:\n\n* **M1** sits between $V_{DD}$ (top terminal) and $V_{out}$ (bottom terminal); its gate is at $V_{in}$.\n* **M2** sits between $V_{out}$ (top terminal) and GND (bottom terminal); its gate is at $V_{in}$.\n* The two devices form a **series stack** from $V_{DD}$ to GND, $V_{out}$ is taken at their common node, and **both gates are tied together to $V_{in}$**.\n\nThis is exactly the *topology* of a CMOS inverter. The decisive detail, however, is the **device type**: the two symbols are drawn **identically** (same arrow direction, no inversion bubble at either gate). A true inverter requires the upper device to be a **PMOS** and the lower an **NMOS**. As drawn, M1 and M2 are the **same type**, and that single fact changes the whole behaviour. I analyse both interpretations below.\n\n---\n\n## 2. As drawn – identical devices (the \"trick\")\n\n### Case A: both NMOS\nLet $V_{th}>0$.\n\n* **M2** (S = GND): on when $V_{GS}=V_{in}>V_{th}$.\n* **M1** (S = $V_{DD}$, the higher‑potential terminal): on only when $V_{GS}=V_{in}-V_{DD}>V_{th}$, i.e. $V_{in}>V_{DD}+V_{th}$ — **impossible** for $0\\le V_{in}\\le V_{DD}$. So **M1 is always OFF**; it can never pull $V_{out}$ up.\n\nKCL at $V_{out}$ then forces:\n\n* $V_{in}>V_{th}$: M2 would source current unless $V_{DS}=0$, so $V_{out}\\to 0$.\n* $V_{in}\\le V_{th}$: both devices off → the $V_{out}$ node has **no DC path** → $V_{out}$ is **floating** (set by initial charge/parasitics).\n\nSo the \"high\" level is never established. The VTC is $V_{out}=0$ for $V_{in}>V_{th}$ and **undefined** for $V_{in}\\le V_{th}$.\n\n### Case B: both PMOS\nLet $|V_{th}|>0$.\n\n* **M1** (S = $V_{DD}$): on when $V_{in}<V_{DD}-|V_{th}|$.\n* **M2** (S = $V_{out}$): on when $V_{out}-V_{in}>|V_{th}|$.\n\nAt $V_{in}=0$, both conduct; equating the currents (M1 in triode, M2 in saturation) with $a=V_{DD}-|V_{th}|$, $b=V_{out}-|V_{th}|$ gives $a^2=2b^2$, i.e.\n$$V_{out}\\big|_{V_{in}=0} = |V_{th}|+\\frac{V_{DD}-|V_{th}|}{\\sqrt{2}} \\approx 0.7\\,V_{DD}$$\nAt $V_{in}=V_{DD}$, M1 is off and M2 is also off ($V_{SG}=V_{out}-V_{DD}\\le0$) → **$V_{out}$ floats** again.\n\nSo the \"high\" is only ≈0.7 $V_{DD}$ (not rail‑to‑rail) and the \"low\" floats.\n\n**Conclusion for the as‑drawn circuit:** with like‑type devices there is always an input region where **both transistors are off**, leaving $V_{out}$ floating, and the opposite rail is not pulled to its full value. The circuit therefore **does not function as a valid digital inverter** (no defined output for one logic level, degraded noise margins).\n\n---\n\n## 3. If the intention was a proper CMOS inverter (M1 = PMOS, M2 = NMOS)\n\nThen the device types are opposite and the floating regions disappear:\n\n* $V_{in}=0$ → PMOS on ($V_{SG}=V_{DD}$), NMOS off → $V_{out}=V_{DD}$ (full high; the PMOS passes a strong '1').\n* $V_{in}=V_{DD}$ → NMOS on ($V_{GS}=V_{DD}$), PMOS off → $V_{out}=0$ (full low; the NMOS passes a strong '0').\n* For $0<V_{in}<V_{DD}$ exactly one device is on (or both briefly in the transition), so $V_{out}$ is **always** defined; the switch point is $V_{M}\\approx V_{DD}/2$ for a symmetric stack.\n\nThis gives rail‑to‑rail output, a steep VTC, and large noise margins — the intended inverter behaviour.\n\n---\n\n## 4. Summary\n\n| Interpretation | $V_{out}$ for $V_{in}=0$ | $V_{out}$ for $V_{in}=V_{DD}$ | Inverter? |\n|---|---|---|---|\n| Both NMOS (as drawn) | **floating** | 0 | No |\n| Both PMOS (as drawn) | ≈ 0.7 $V_{DD}$ | **floating** | No |\n| M1=PMOS, M2=NMOS | $V_{DD}$ | 0 | **Yes** |\n\n**Key takeaway:** the topology is that of an inverter, but because the two MOSFETs are drawn as the **same type**, the circuit cannot swing to both rails and has a floating‑output region, so it is **not** a working inverter. To realise an inverter the upper and lower devices must be of **opposite** channel type (one PMOS tied to $V_{DD}$, one NMOS tied to GND, both gates to $V_{in}$).",
        "format": "markdown",
        "sha256": "b0ca2ead790bdbbf8222c0294a280a11214612decfc909007ca3beff275712a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer does not identify the drawn devices unequivocally as NMOS and gets the key upper-device action wrong: M1’s source is at Vout, so it acts as a source-follower pull-up rather than being always off. The required device-identification gate is not met.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 9215,
        "total_tokens": 9499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 9215,
        "total_tokens": 9499,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe schematic is the standard **CMOS inverter** (the basic building block of digital logic). Two enhancement‑mode MOSFETs are stacked between the supplies, their gates are tied together to the input $V_{in}$, and their common drain node is the output $V_{out}$:\n\n* **$M_1$ (top) = PMOS** – the *pull‑up* device. Its source is the $V_{DD}$ node, its drain is $V_{out}$.\n* **$M_2$ (bottom) = NMOS** – the *pull‑down* device. Its source is the ground node, its drain is $V_{out}$.\n* The arrow on each symbol marks the source terminal, which is why the source of $M_1$ sits at the positive rail and the source of $M_2$ sits at ground.\n\nThe two devices have **complementary** gate control: a low $V_{in}$ turns on the PMOS, a high $V_{in}$ turns on the NMOS.\n\n## Static (DC) operation\n\n| $V_{in}$ | $M_1$ (PMOS) | $M_2$ (NMOS) | $V_{out}$ | Logic |\n|---------|--------------|--------------|-----------|-------|\n| Low ($0$) | ON (resistor to $V_{DD}$) | OFF | $\\approx V_{DD}$ | **1** |\n| High ($V_{DD}$) | OFF | ON (resistor to GND) | $\\approx 0$ | **0** |\n\n* **$V_{in}=0$:** $V_{GS2}=0<V_{thn}$ so $M_2$ is cut off. $V_{SG1}=V_{DD}>|V_{thp}|$ so $M_1$ conducts; with $V_{out}\\to V_{DD}$, $V_{SD1}$ is small and $M_1$ operates in the **triode** region, acting as a low‑resistance path to $V_{DD}$. With no DC load current, $V_{out}=V_{DD}$.\n* **$V_{in}=V_{DD}$:** $V_{GS1}=0<|V_{thp}|$ so $M_1$ is cut off. $V_{GS2}=V_{DD}>V_{thn}$ so $M_2$ conducts; $V_{out}\\to 0$ puts $M_2$ in **triode**, a low‑resistance path to ground. With no load current, $V_{out}=0$.\n\nBecause in every steady state **one transistor is always off**, there is no DC path from $V_{DD}$ to ground:\n\n$$P_{static} = 0$$\n\nThis zero static power dissipation (only leakage flows) is the defining advantage of CMOS over resistor‑pull‑up or NMOS logic.\n\n## Transition region and the $V_I$ characteristic\n\nAs $V_{in}$ sweeps from $0$ to $V_{DD}$, $V_{out}$ sweeps from $V_{DD}$ to $0$:\n\n1. **$0 \\le V_{in} < V_{thn}$:** $M_2$ off, $M_1$ in triode → $V_{out}\\approx V_{DD}$ (flat top).\n2. **$V_{thn} < V_{in} < V_{DD}-|V_{thp}|$:** both devices conduct. Initially both are in saturation, giving the steepest slope of the $V_I$ curve; as $V_{out}$ falls, $M_1$ leaves saturation first (enters triode) while $M_2$ stays in saturation, then $M_2$ also enters triode.\n3. **$V_{in} > V_{DD}-|V_{thp}|$:** $M_1$ off, $M_2$ in triode → $V_{out}\\approx 0$ (flat bottom).\n\nThe slope in the middle is made very large (nearly vertical) by high device transconductances, so the inverter behaves as a sharp inverting switch.\n\n**Switching threshold $V_M$** (the point where $V_{out}=V_{in}$) is set by the relative strengths of the two devices:\n\n$$V_M = \\frac{V_{DD}+V_{thn}-\\sqrt{\\frac{\\beta_n}{\\beta_p}\\,(V_{DD}-V_{thn}-V_{thp})^2}}{1+\\sqrt{\\beta_n/\\beta_p}},\\quad \\beta_i = k_i' \\frac{W_i}{L_i}$$\n\nFor equal strengths ($\\beta_n=\\beta_p$) and matched thresholds, $V_M \\approx V_{DD}/2$, which is desirable.\n\n## Noise margins\n\nWith the $V_I$ curve characterized by $V_{IL},\\,V_{OH},\\,V_{OL},\\,V_{HH}$, the inverter provides two noise margins:\n\n$$NM_L = V_{IL}-V_{OL}\\approx V_{IL},\\qquad NM_H = V_{OH}-V_{HH}=V_{DD}-V_{DD}=V_{DD}-V_{HH}$$\n\nThese margins are large when the transition is steep, i.e. when the devices are sized generously.\n\n## Dynamic power\n\nAlthough static power is zero, switching the output load capacitance $C_L$ and the short‑circuit current during the transition dissipate energy:\n\n$$P_{dyn} = \\underbrace{C_L V_{DD}^2 f}_{\\text{charging/discharging } C_L} + \\underbrace{P_{sc}}_{\\text{short‑circuit (both on)}}$$\n\nThe short‑circuit term is minimized by making the transition (and the overlap of conduction) as fast as possible.\n\n## Design notes\n\n* **Sizing ratio $W_{M1}/W_{M2}$** is chosen to (a) place $V_M$ near $V_{DD}/2$ and (b) balance rise and fall times. Because $\\mu_n \\approx 2\\,\\mu_p$, the PMOS is typically made wider (larger $W/L$) than the NMOS for symmetric drive.\n* **Minimum device lengths** set the speed and the steepness of the $V_I$ curve.\n* The inverter inverts logic, has rail‑to‑rail output swing, zero DC power, and high noise immunity — which is why it is the universal cell of CMOS digital circuits.\n\n**Summary:** the figure is a CMOS inverter — a PMOS pull‑up ($M_1$) and an NMOS pull‑down ($M_2$) with common gate $V_{in}$ and common drain $V_{out}$. It produces $V_{out}=\\overline{V_{in}}$, draws no static power, and its sharp $V_I$ transition, threshold $V_M\\approx V_{DD}/2$, and noise margins are governed by the relative $W/L$ of the two transistors.",
        "format": "markdown",
        "sha256": "75d35625c91c684a5e9e2dab3f25d35d41003716326f544f7e599ff5d87cc2cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the upper device as PMOS and analyzes the circuit as a standard CMOS inverter. The golden solution requires recognizing that both devices are NMOS; this topology error receives 0.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 7356,
        "total_tokens": 7640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 7356,
        "total_tokens": 7640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5797,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe schematic is a **two‑terminal‑supplied, single‑input, single‑output CMOS voltage inverter**.\n\n* **M1** is the *pull‑up* device connected between $V_{DD}$ and the output node. To make the circuit work with the supply connections shown, M1 must be a **PMOS** (its source/body at $V_{DD}$).\n* **M2** is the *pull‑down* device connected between the output node and ground. It must be an **NMOS** (its source/body at GND).\n* Both gates are tied to $V_{in}$; the common drain/source node is $V_{out}$.\n\nSo $V_{out}$ is the *inverted* version of $V_{in}$, with a full rail‑to‑rail swing (0 V to $V_{DD}$).\n\n## DC operation\n\n**Input low, $V_{in}=0$:**\n* M2 (NMOS): $V_{GS2}=0 < V_{thn}$ → **OFF** (open switch to ground).\n* M1 (PMOS): $V_{SG1}=V_{DD}-0=V_{DD} > |V_{thp}|$ → **ON**. As $V_{out}$ rises toward $V_{DD}$, M1 enters its linear (ohmic) region and behaves like a low resistance to $V_{DD}$, so it can pull the node all the way to $V_{DD}$.\n* Result: $V_{out}=V_{DD}$ (logic 1). No DC path from $V_{DD}$ to GND → **quiescent power = 0**.\n\n**Input high, $V_{in}=V_{DD}$:**\n* M1 (PMOS): $V_{SG1}=0 < |V_{thp}|$ → **OFF** (open switch to $V_{DD}$).\n* M2 (NMOS): $V_{GS2}=V_{DD} > V_{thn}$ → **ON**. As $V_{out}$ falls toward 0, M2 is in its linear region and pulls the node to ground.\n* Result: $V_{out}=0$ (logic 0). Again **quiescent power = 0**.\n\n**Transition region, $V_{thn}<V_{in}<V_{DD}-|V_{thp}|$:**\nBoth transistors conduct. The node $V_{out}$ is determined by the ratio of the two currents and falls steeply from $V_{DD}$ to 0 as $V_{in}$ rises — this is where the device acts as a high‑gain **inverting amplifier** (the slope $dV_{out}/dV_{in}$ is large and negative).\n\nThe **switching threshold** $V_M$ (the input at which $V_{out}=V_{in}=V_M$) is found by equating the two saturation currents:\n\n$$\\tfrac{1}{2}\\,\\mu_n C_{ox}\\!\\left(\\tfrac{W}{L}\\right)_n (V_M - V_{thn})^2 \\;=\\; \\tfrac{1}{2}\\,\\mu_p C_{ox}\\!\\left(\\tfrac{W}{L}\\right)_p (V_{DD}-V_M-|V_{thp}|)^2$$\n\nFor a symmetric device pair ($\\mu_nC_{ox}(W/L)_n \\approx \\mu_pC_{ox}(W/L)_p$ and $|V_{thp}|\\approx V_{thn}$), this gives $V_M \\approx V_{DD}/2$, i.e. the inverter switches at mid‑supply, giving balanced noise margins.\n\n## Dynamic (short‑circuit) current\n\nWhile $V_{in}$ is ramping, there is a brief interval in which **both** M1 and M2 are on, creating a direct $V_{DD}\\rightarrow$ GND path. This produces a transient \"crowbar\" current $I_{sc}$, which is the dominant source of dynamic power in CMOS. The smaller the transition time, the larger $I_{sc}$.\n\n## Summary of the VTC\n\n| $V_{in}$ range | M1 (PMOS) | M2 (NMOS) | $V_{out}$ |\n|---|---|---|---|\n| $< V_{thn}$ | ON | OFF | $V_{DD}$ |\n| $V_{thn}\\dots V_{DD}-|V_{thp}|$ | ON | ON | falls steeply (gain region) |\n| $> V_{DD}-|V_{thp}|$ | OFF | ON | 0 |\n\nHence the circuit is a **rail‑to‑rail, zero‑static‑power, inverting CMOS gate** with a steep, high‑gain transition centered near $V_M$.\n\n---\n\n**Remark on the device symbols.** The supply connections (top to $V_{DD}$, bottom to GND) *require* M1 to be PMOS and M2 NMOS for the inverter action above. If, instead, both transistors were the same type (as the identical arrow directions in the drawing might suggest), the circuit would **not** be a functional inverter: with $V_{in}=0$ both devices would be off and $V_{out}$ would be left floating (high‑impedance), and with $V_{in}$ high the two like‑type devices would merely settle at an intermediate voltage. The intended, workable interpretation is therefore the CMOS inverter described above (M1 = PMOS, M2 = NMOS).",
        "format": "markdown",
        "sha256": "8f62236a66e9fb0ee7c00a84a0501a8d5b9621922c10446439dde982d75af997"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M1 as PMOS and analyzes the circuit as an ordinary CMOS inverter; both devices are NMOS, so this violates the task’s non-negotiable scoring rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 9870,
        "total_tokens": 10154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8640,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 284,
        "output_tokens": 9870,
        "total_tokens": 10154,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8640,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic – terminals and device types\n\n| Device | Gate | Source | Drain | Why |\n|--------|------|--------|-------|-----|\n| **M₁** | $V_{in}$ | Ground | $V_{out}$ | Source must be the *lowest* potential terminal → **n‑channel MOSFET**, configured as a **common‑source** stage |\n| **M₂** | $V_{out}$ (tied to its low‑side terminal) | $V_{DD}$ | $V_{out}$ | Source must be the *highest* potential terminal → **p‑channel MOSFET**; gate tied to drain ⇒ **diode‑connected** |\n\nSo the topology is a **common‑source amplifier (M₁) with a diode‑connected active load (M₂)**. The arrowheads on the symbols mark the channel type / body‑diode direction; the biasing requirement (M₁ to ground, M₂ to $V_{DD}$) fixes which device is n‑ and which is p‑channel.\n\n*Function at a glance:* M₁ is the **inverting driver** (its drain current is set by $V_{in}$), M₂ is the **load** that delivers the supply current. No external bias is needed for M₂ – it self‑biases through the gate‑to‑drain short.\n\n---\n\n## 2. DC (quiescent) analysis\n\nAssume both transistors in saturation and long‑channel square‑law behaviour.\n\n* M₁ (nMOS, $V_{GS1}=V_{in}$, source = 0):\n$$I_{D1}=\\tfrac{1}{2}k_1\\,(V_{in}-V_{tn})^2,\\qquad k_1=\\mu_n C_{ox}\\tfrac{W}{L}_1$$\nvalid for $V_{in}>V_{tn}$ and $V_{DS1}\\ge V_{GS1}-V_{tn}$, i.e. $V_{out}\\ge V_{in}-V_{tn}$.\n\n* M₂ (pMOS, diode‑connected ⇒ always in saturation when on, $V_{SG2}=V_{DD}-V_{out}$):\n$$I_{D2}=\\tfrac{1}{2}k_2\\,(V_{DD}-V_{out}-|V_{tp}|)^2,\\qquad k_2=\\mu_p C_{ox}\\tfrac{W}{L}_2$$\nvalid for $V_{out}\\le V_{DD}-|V_{tp}|$.\n\nKCL at the $V_{out}$ node, $I_{D1}=I_{D2}=I_D$:\n\n$$\\tfrac{1}{2}k_1(V_{in}-V_{tn})^2=\\tfrac{1}{2}k_2(V_{DD}-V_{out}-|V_{tp}|)^2$$\n\n$$\\boxed{\\,V_{out}=V_{DD}-|V_{tp}|-\\sqrt{\\dfrac{k_1}{k_2}}\\,(V_{in}-V_{tn})\\,}\\qquad(\\text{within the saturation window})$$\n\nHence $V_{out}$ **decreases** as $V_{in}$ increases → inverting response. The allowable input range is set by the two saturation limits above; outside it the stage saturates toward a rail (digital‑inverter‑like behaviour at the extremes, linear amplification in the middle).\n\n---\n\n## 3. Small‑signal (AC) analysis\n\nReplace each MOSFET by its hybrid‑π model.\n\n* M₁: controlled source $g_{m1}v_{in}$ (source at AC ground), output resistance $r_{o1}$.\n* M₂, diode‑connected (gate = drain = $V_{out}$, source = AC ground): the impedance looking into its drain is\n$$R_{M2}=\\frac{1}{g_{m2}+1/r_{o2}}\\approx \\frac{1}{g_{m2}}$$\ni.e. it behaves like a **resistive load of $\\approx 1/g_{m2}$** (this is why a diode load gives much lower gain than a current‑source load).\n\nKCL at the $V_{out}$ node (no external current):\n\n$$\\frac{v_{out}}{r_{o1}}+g_{m1}v_{in}+v_{out}\\!\\left(g_{m2}+\\frac{1}{r_{o2}}\\right)=0$$\n\n$$\\boxed{\\,A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_{m1}}{g_{m2}+\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}}}\\;\\approx\\;-\\frac{g_{m1}}{g_{m2}}\\,}$$\n\nKey consequences:\n\n* **Inverting** ($-$ sign), moderate gain equal to the ratio of transconductances (typically a few), because the diode load collapses the output resistance to $1/g_{m2}$ rather than to $r_o$.\n* **Input resistance** $R_{in}\\to\\infty$ (MOS gate).\n* **Output resistance** $R_{out}=r_{o1}\\parallel r_{o2}\\parallel \\tfrac{1}{g_{m2}}\\approx \\tfrac{1}{g_{m2}}$ (low).\n\n### Frequency behaviour (brief)\nTwo main capacitances shape the response: $C_{gs1}$ at the input (pole at very high frequency because $R_{in}$ is huge) and the total capacitance at $V_{out}$, $C_L+C_{gd1}+C_{gs2}+C_{gd2}$, which with $R_{out}\\approx 1/g_{m2}$ sets the **dominant output pole** $\\omega_{p,1}\\approx 1/(R_{out}C_{tot})$. The gain is further reduced at higher frequency by the Miller effect on $C_{gd1}$ (multiplied by $|A_v|$).\n\n---\n\n## 4. Summary / interpretation\n\n* The circuit is a **single‑stage inverting (common‑source) voltage amplifier**.\n* M₁ = nMOS driver, source grounded → $v_{gs1}=v_{in}$.\n* M₂ = pMOS **diode‑connected load**, self‑biased, providing a load of $\\approx 1/g_{m2}$.\n* $V_{out}(V_{in})$ is given by the square‑root relation above; both devices must satisfy their saturation conditions for linear operation.\n* Voltage gain $A_v\\approx -g_{m1}/g_{m2}$, $R_{in}\\approx\\infty$, $R_{out}\\approx 1/g_{m2}$.\n* Because the load is diode‑connected, the gain is **modest** (not $g_{m1}r_o$). This topology is therefore used as a compact building block (e.g. the first stage of a two‑stage amplifier or as the front end of a cascode, where adding a cascode device on top of M₂ restores the high $r_o$‑limited gain).\n\nIn short: **common‑source nMOS inverting amplifier with a self‑biased diode‑connected pMOS active load.**",
        "format": "markdown",
        "sha256": "39bb61043d1e13314bab89de0497f14abd78a49ce7ecd38b7b6d5c52db4fb249"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the consistent inverting gain −gm1/(gm2 + 1/ro1 + 1/ro2), equivalent to the golden form. Secondary frequency comments do not affect the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 623,
        "output_tokens": 9334,
        "total_tokens": 9957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 623,
        "output_tokens": 9334,
        "total_tokens": 9957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nReading the symbols and the connections:\n\n* **M₁** (bottom) – NMOS. Source → GND, gate → $V_{in}$, drain → $V_{out}$.\n* **M₂** (top) – PMOS, **diode‑connected**. Its source is at $V_{DD}$ (top), and its gate is wired to its *drain*, which is the $V_{out}$ node. (If M₂ were an NMOS the gate‑to‑drain tie would give $V_{GS}=0$ and it would never conduct, so it must be a PMOS.)\n\nSo the circuit is a **common‑source amplifier with a diode‑connected active load** – the most basic single‑stage analog inverter. There is no external load; $V_{out}$ is an open terminal. Substrates are assumed tied to the sources (M₁ body → GND, M₂ body → $V_{DD}$), so **body effect is negligible**.\n\n---\n\n## 2. DC operating point\n\nBoth transistors carry the same current $I_D$ (no other path). M₂, being diode‑connected, is *always* in saturation; M₁ is in saturation as long as $V_{DS1} > V_{GS1}-V_{thn}$.\n\n$$I_{D1}=k_n\\,(V_{in}-V_{thn})^2,\\qquad k_n=\\tfrac12\\mu_nC_{ox}(W/L)_1$$\n$$I_{D2}=k_p\\,(V_{DD}-V_{out}-|V_{thp}|)^2,\\qquad k_p=\\tfrac12\\mu_pC_{ox}(W/L)_2$$\n\nEquating and solving for $V_{out}$:\n\n$$\\boxed{\\,V_{out}=V_{DD}-|V_{thp}|-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}\\;\\big(V_{in}-V_{thn}\\big)\\,}\\qquad(V_{in}>V_{thn})$$\n\nTwo useful consequences:\n\n* The **DC transfer characteristic is linear** (square‑root of a square), with a constant large‑signal slope\n$$\\dfrac{dV_{out}}{dV_{in}}=-\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}=-\\frac{g_{m1}}{g_{m2}}\\Big|_{no\\,r_o}$$\n* **Output swing is limited.** The top is clipped at $V_{DD}-|V_{thp}|$ (M₂ can only pull $V_{out}$ up to threshold); the bottom is clipped by M₁'s saturation limit. M₁ stays in saturation only while\n$$V_{in}-V_{thn}\\le \\frac{V_{DD}-|V_{thp}|}{1+\\sqrt{\\mu_n(W/L)_1/\\mu_p(W/L)_2}}$$\nFor $V_{in}\\le V_{thn}$, M₁ is off, $I_D=0$, and $V_{out}$ has no defined DC level (it floats; a finite load would set it to $V_{DD}-|V_{thp}|-\\sqrt{I_L/k_p}$).\n\n---\n\n## 3. Small‑signal model and gain\n\nWith $v_{s1}=0$, $v_{gs1}=v_{in}$ and $v_{gs2}=v_{ds2}=v_{out}$, KCL at $V_{out}$ gives the exact expression\n\n$$\\boxed{\\,A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_{m1}}{g_{m2}+g_{ds1}+g_{ds2}}=-g_{m1}\\big(r_{o1}\\parallel r_{o2}\\parallel \\tfrac{1}{g_{m2}}\\big)\\,}$$\n\nBecause $g_{m2}\\gg g_{ds1},g_{ds2}$, the usual approximation is\n\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n**Key design insight:** the gain is set *only by device size ratios* (and the mobility ratio), **not by the bias current**. You trade gain for $W/L$, and the diode‑connected load caps the gain at a moderate value (typically $-10$ to $-100$). Replacing M₂ with a true current source would raise the gain by a factor $\\approx g_{m2}r_{o2}$.\n\n---\n\n## 4. Input and output resistance\n\n* **Input resistance** $R_{in}=\\infty$ (DC / low freq) – only the gate of M₁ is seen. At high frequency it becomes $1/(sC_{gs1})$.\n* **Output resistance**\n$$R_{out}=r_{o1}\\parallel r_{o2}\\parallel \\frac{1}{g_{m2}}\\approx \\frac{1}{g_{m2}}$$\nThe diode‑connected device presents the low impedance $1/g_{m2}$, which is why the gain is limited.\n\n---\n\n## 5. Frequency response\n\nLet $C_L$ be the total capacitance at $V_{out}$ and $C_{gd1}$ the drain‑gate capacitance of M₁.\n\n* **Dominant (low) pole:** $\\omega_{p1}=1/(R_{out}C_L)$ – sets the bandwidth.\n* **Right‑half‑plane zero** from feed‑forward through $C_{gd1}$: $\\omega_z = g_{m1}/C_{gd1}$ – usually the bandwidth‑limiting factor and the source of the non‑monotonic step response.\n\nSo $BW \\approx \\min\\{1/(R_{out}C_L),\\, g_{m1}/C_{gd1}\\}$.\n\n---\n\n## 6. Summary\n\n| Quantity | Expression |\n|---|---|\n| Topology | Common‑source, diode‑connected PMOS load |\n| DC gain (large‑signal slope) | $-\\sqrt{\\mu_n(W/L)_1/\\mu_p(W/L)_2}$ |\n| Small‑signal gain | $-g_{m1}(r_{o1}\\parallel r_{o2}\\parallel 1/g_{m2})\\approx -g_{m1}/g_{m2}$ |\n| $R_{in}$ | $\\infty$ |\n| $R_{out}$ | $\\approx 1/g_{m2}$ |\n| Output swing | $[V_{DS,sat1},\\;V_{DD}-|V_{thp}|]$ (clipped both ends) |\n| Poles/zeros | pole $1/(R_{out}C_L)$, RHP zero $g_{m1}/C_{gd1}$ |\n\nIn short, it is a **self‑biased, low‑gain inverting stage** whose gain is fixed by transistor ratios and whose output is a finite, moderate impedance. It is widely used as a simple amplifier and as the gain/bias block inside circuits that need a built‑in, level‑independent load (current mirrors, level shifters, simple regulators, etc.). To get more gain or a higher output swing, the diode‑connected M₂ is the first thing you would change (to a current‑source load and a higher $V_{DD}$).",
        "format": "markdown",
        "sha256": "4c44786f537aede5e62b0ac7a73b68653e5495b96fae225973f7fbc492be4981"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output conductances included, consistent with the full-credit rule. Extra operating-point and frequency-response claims are not central to the answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 623,
        "output_tokens": 9297,
        "total_tokens": 9920,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 623,
        "output_tokens": 9297,
        "total_tokens": 9920,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n| Transistor | Type | Source | Drain | Gate | Role |\n|------------|------|--------|-------|------|------|\n| $M_1$ | NMOS | ground | $V_{out}$ | $V_{in}$ | **Common‑source driver** |\n| $M_2$ | PMOS | $V_{DD}$ | $V_{out}$ | $V_{out}$ | **Diode‑connected (active) load** |\n\nThe gate of $M_2$ is shorted to its drain, so $M_2$ is a *diode‑connected PMOS*. The stage is therefore a **single‑stage common‑source amplifier with a diode‑connected active load**. $V_{DD}$ and ground are AC grounds.\n\n---\n\n## 2. DC analysis\n\nLet $k_n'=\\mu_n C_{ox}$, $k_p'=\\mu_p C_{ox}$ and ignore channel‑length modulation first.\n\nBoth devices carry the same current. With $M_1$ in saturation, $V_{GS1}=V_{in}$:\n\n$$I_D=\\tfrac12 k_n'\\!\\left(\\tfrac{W}{L}\\right)_1 (V_{in}-V_{tn})^2$$\n\nWith $M_2$ diode‑connected, $V_{SG2}=V_{DD}-V_{out}$, so it is *always* in saturation whenever it conducts ($V_{SD}=V_{SG}\\ge V_{SG}-|V_{tp}|$):\n\n$$I_D=\\tfrac12 k_p'\\!\\left(\\tfrac{W}{L}\\right)_2 (V_{DD}-V_{out}-|V_{tp}|)^2$$\n\nEquating the two gives a **closed‑form, linear** DC transfer:\n\n$$\\boxed{V_{out}=V_{DD}-|V_{tp}|-\\sqrt{\\frac{k_n'(W/L)_1}{k_p'(W/L)_2}}\\,(V_{in}-V_{tn})}$$\n\nSo the quiescent $V_{out}$ is set by the input DC level and the size ratio; no separate bias network is needed. The DC slope $dV_{out}/dV_{in}=-\\sqrt{(k_n'W_1L_2)/(k_p'W_2L_1)}$ already equals $-g_{m1}/g_{m2}$.\n\n**Saturation / swing limits**\n\n* $M_2$ conducts (and is in saturation) only while $V_{out}<V_{DD}-|V_{tp}|$.\n* $M_1$ is in saturation only while $V_{out}>V_{in}-V_{tn}$.\n\nHence the *both‑saturated* window is $V_{in}-V_{tn}<V_{out}<V_{DD}-|V_{tp}|$. Driving beyond it puts $M_1$ in triode (low end) or cuts $M_2$ off (high end). The usable output swing is therefore roughly from a few $V_{tn}$ up to $V_{DD}-|V_{tp}|$ — **larger** than with a current‑mirror load, which clamps the headroom to $V_{OV2}$.\n\n---\n\n## 3. Small‑signal analysis\n\nTransconductances at the Q‑point: $g_{m1}=2I_D/(V_{in}-V_{tn})$, $g_{m2}=2I_D/(V_{SG2}-|V_{tp}|)$. Output resistances $r_{o1}=1/(\\lambda_1 I_D)$, $r_{o2}=1/(\\lambda_2 I_D)$. If each body is tied to its own source, $g_{mb}=0$.\n\n**Impedance of the diode‑connected load.** Looking into the drain of a diode‑connected MOSFET (gate tied to drain, other terminal at AC ground) the small‑signal resistance is\n\n$$r_2=\\frac{1}{g_{m2}+g_{mb2}+1/r_{o2}}\\;\\approx\\;\\frac{1}{g_{m2}}$$\n\n**KCL at the output node** (open circuit; $M_1$ injects $g_{m1}v_{in}$, the two channels and the load shunt the node to ground):\n\n$$g_{m1}v_{in}+v_{out}\\!\\left(\\frac{1}{r_{o1}}+g_{m2}+g_{mb2}+\\frac{1}{r_{o2}}\\right)=0$$\n\nTherefore\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-\\frac{g_{m1}}{\\dfrac{1}{r_{o1}}+g_{m2}+g_{mb2}+\\dfrac{1}{r_{o2}}}}$$\n\nand\n\n$$\\boxed{R_{out}=r_{o1}\\,\\|\\,r_{o2}\\,\\|\\,\\frac{1}{g_{m2}+g_{mb2}}}$$\n\nBecause $r_{o1},r_{o2}\\gg 1/g_{m2}$ in practice, this reduces to the simple, very useful form\n\n$$\\boxed{A_v\\approx-\\frac{g_{m1}}{g_{m2}+g_{mb2}}\\approx-\\frac{g_{m1}}{g_{m2}}=-\\sqrt{\\frac{k_n'(W/L)_1}{k_p'(W/L)_2}},\\qquad R_{out}\\approx\\frac{1}{g_{m2}}}$$\n\n**Input resistance:** $R_{in}\\to\\infty$ (gate of $M_1$).\n\n---\n\n## 4. Summary of characteristics / trade‑offs\n\n* **Gain:** modest, $|A_v|\\approx g_{m1}/g_{m2}$, set by the $W/L$ ratio (and $\\mu_n/\\mu_p$). Much lower than a current‑mirror load ($g_{m1}r_{o1}\\|r_{o2}$), because the diode‑connected load has a small output resistance $\\sim1/g_{m2}$ that shunts the drain.\n* **Output swing:** large — essentially $0\\rightarrow V_{DD}-|V_{tp}|$ — because the load does not consume a fixed voltage headroom.\n* **Bandwidth:** high. The single pole is $f_p\\approx1/(2\\pi R_{out}C_L)$ with $R_{out}\\approx1/g_{m2}$, so the stage is fast; the only caveat is the Miller capacitance $C_{gd1}(1+|A_v|)$ at the input.\n* **Biasing:** self‑biased by the current equality; the Q‑point moves with $V_{in,DC}$, so $V_{in,DC}$ is chosen to place $V_{out,DC}$ in the middle of the swing.\n\n**In one line:** the circuit is a common‑source stage whose PMOS load is diode‑connected; it trades gain for output swing and bandwidth, with $A_v\\approx -g_{m1}/g_{m2}$, $R_{in}\\approx\\infty$, and $R_{out}\\approx 1/g_{m2}$.",
        "format": "markdown",
        "sha256": "2f4c6b3d6c2d3bcd2a209e3cdc97173bebdf869bd68e621d73510c008002257c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain, including a consistent output-conductance form and the usual gm1/gm2 approximation. Secondary swing and large-signal comments do not alter the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 623,
        "output_tokens": 8462,
        "total_tokens": 9085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 623,
        "output_tokens": 8462,
        "total_tokens": 9085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6843,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Terminal connections (read directly from the schematic)\n\n| Device | Gate | Top terminal | Bottom terminal |\n|--------|------|--------------|-----------------|\n| M₂     | V_in | V_DD         | V_out (the middle node) |\n| M₁     | 0 V (gnd) | V_out | 0 V (gnd) |\n\nSo the output node V_out is the node **between** the two devices, the input is applied to the gate of M₂, and the gate of M₁ is tied to **DC ground** (not to V_out, not to a bias). Both body‑arrows point the same way, so M₁ and M₂ are the **same type** of device – this is *not* a complementary (NMOS‑over‑PMOS) stack.\n\n## DC / on–off analysis\n\nThe gate of M₁ is at 0 V and one of its source/drain terminals is also at 0 V, so M₁ is biased with **V_GS1 = 0** (or, equivalently, its gate is shorted to one terminal). What M₁ does then depends on the device type:\n\n* **If both are NMOS.** M₁ has V_GS1 = 0 < V_th ⇒ **M₁ is permanently OFF** (open circuit). It therefore provides no DC path to ground. M₂ has its source at the lower node (V_out) and drain at V_DD, i.e. a *common‑drain (source‑follower)* connection, but with no load current the output is a **high‑impedance, floating node** that sits near V_in − V_th. The stage has no well‑defined DC operating point and no load – it is not a functioning amplifier as drawn.\n\n* **If both are PMOS.** M₂ has its source at V_DD (the higher node) and drain at V_out ⇒ a **common‑source** input device, ON when V_in < V_DD − |V_tp|. M₁ then has its source at V_out and drain at ground, so it conducts when V_out > |V_tp|. The two form a degenerate inverter‑like pair, but because the \"load\" (M₁) is ON exactly when V_out is *high*, the high output level is clamped to a mid‑rail value (neither M₁ nor M₂ can take V_out to a rail while the other is strong). The swing is therefore poor (high level ≈ mid‑supply, low level ≈ 0).\n\nIn both cases the circuit is **mis‑biased for normal use**: the bottom device is not a proper current‑source or diode‑connected load. (If the design intent was a diode‑connected load, the gate of M₁ should be tied to **V_out**, not to ground.)\n\n## Small‑signal behaviour (region where M₂ is active and M₁ is biased ON)\n\nBecause the gate of M₁ is at AC ground, v_gs1 = 0, so M₁'s dependent source vanishes and M₁ simply looks like its output resistance r_o1 (or its triode resistance, if in triode) from V_out to ground – it acts as a *passive load*. M₂ supplies the transconductance g_m2 and its own r_o2. Hence\n\n* common‑source interpretation (PMOS):  A_v ≈ −g_m2 (r_o2 ‖ r_o1)  (inverting)\n* source‑follower interpretation (NMOS, M₁ off): A_v ≈ +1 with very large output impedance (unloaded buffer)\n\n## Conclusion\n\nThe topology is a single‑input device (M₂) stacked over a second device (M₁) whose gate is hard‑wired to DC ground. Because the body arrows match, M₁ and M₂ are the same type, so this is **not** a CMOS inverter. With M₁'s gate at ground the lower device is either always OFF (NMOS case → floating, high‑Z output, no valid bias) or a voltage‑dependent switch that clamps the output (PMOS case → mid‑rail high level). The circuit therefore does **not** behave as a standard two‑rail amplifier or inverter; the biasing of M₁ (gate to ground instead of to V_out or to a proper bias) is the key flaw, and the stage's gain is limited to −g_m2(r_o2 ‖ r_M1) only in the narrow region where M₁ is incidentally turned on.",
        "format": "markdown",
        "sha256": "7968c86e2215918a38fa2a052820ad8c43332e8b39e4de075ace45de8874fa7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the two PMOS devices and M2 as a common-source input device, and notes that M1 conducts when Vout is high. However, M1 is diode-connected with its gate and drain at ground; the answer incorrectly treats it as a passive ro load, misses the gm/gm gain, and reaches the wrong conclusion about the circuit.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1416,
        "output_tokens": 17147,
        "total_tokens": 18563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1416,
        "output_tokens": 17147,
        "total_tokens": 18563,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16183,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic\n\nBoth transistors carry the arrow **on the source lead pointing into the channel**, which is the P‑channel convention (the source is the lead the arrow sits on).  Tracing the connections:\n\n| Device | Gate | Source (arrow lead) | Drain | Body |\n|--------|------|--------------------|-------|------|\n| **M₂** | V_in | V_DD | V_out | V_DD |\n| **M₁** | 0 (gnd) | V_out | 0 (gnd) | V_out |\n\nBecause the body of each device is tied to its own source, V_SB = 0 (no body effect) and the symbol is electrically consistent.\n\n* M₂: source at the AC‑ground rail V_DD, input at the gate, signal taken from the drain → **common‑source (CS) stage**.\n* M₁: gate tied to its drain (both at ground) → **diode‑connected MOSFET**, used as the load.  With V_SG1 = V_out and V_SD1 = V_out we always have V_SD1 > V_SG1 − |V_th|, so **M₁ is in saturation whenever V_out > |V_th|**.\n\n> Sanity check: if the symbols were read as NMOS, M₁ (V_GS = 0) would be permanently off and the node V_out would have no DC return path – the circuit would not work.  The PMOS reading is the only self‑consistent one.\n\n## 2. DC behaviour\n\n**M₁ (load):** in saturation,\n$$I_{D1}=\\tfrac{1}{2}\\,\\mu_p C_{ox}\\tfrac{W}{L}\\Big|_1\\,(V_{out}-|V_{th1}|)^2,\\quad V_{out}>|V_{th1}|$$\n\n**M₂ (driver):** V_SG2 = V_DD − V_in, on when V_in < V_DD − |V_th2|.\n* Saturation while V_out ≤ V_in + |V_th2|\n* Linear (triode) while V_out > V_in + |V_th2|\n\n**Output swing (the key limitation):**\n* *V_in = V_DD* (M₂ off): the node is held only by M₁, which turns off at V_out = |V_th1|.  Hence **V_out,low ≈ |V_th1| ≠ 0**.\n* *V_in = 0* (M₂ hard on): M₂ acts as a V_DD‑to‑V_out resistor that must balance the square‑law current of M₁.  The equilibrium lies **below V_DD**, so **V_out,high < V_DD**.\n\nSo the stage is an **inverting** transfer characteristic, but the logic swing is *degraded* at both rails (it neither reaches 0 nor V_DD) – the classic drawback of a diode‑connected, same‑type load.  The DC bias point for a mid‑range V_in is found from I_D2(V_out, V_in) = I_D1(V_out) with the appropriate region for M₂.\n\n## 3. Small‑signal model\n\nLet g_m1, g_m2 and r_o1, r_o2 be the small‑signal parameters at the bias point (assume M₂ in saturation).\n\n* Input resistance: **R_in = ∞** (MOS gate).\n* M₂ is a common‑source transconductance g_m2 with its source at AC ground (V_DD), injecting g_m2·v_in into the output node.\n* Looking into the **source** of M₁ (gate and drain both at AC ground) gives the well‑known impedance 1/g_m1 (∥ r_o1).\n* Hence the total load at the output is\n$$R_{out} = r_{o2}\\ \\parallel\\ \\Big(\\frac{1}{g_{m1}}\\parallel r_{o1}\\Big) \\;\\approx\\; r_{o2}\\parallel\\frac{1}{g_{m1}}$$\n\n**Voltage gain** (inverting):\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_{m2}\\,R_{out}\\;\\approx\\; -\\frac{g_{m2}}{g_{m1}}\\quad(\\text{if } r_{o2}\\gg 1/g_{m1})$$\n\n## 4. Summary\n\n* M₂ = PMOS common‑source amplifier; M₁ = diode‑connected PMOS (gate = drain = gnd) in saturation, acting as a square‑law load.\n* The circuit is an **inverting voltage amplifier / inverter**.\n* Small‑signal gain ≈ −g_m2/g_m1 (≈ −(W/L)₂/(W/L)₁ if both saturated with equal overdrives); R_out ≈ (1/g_m1)∥r_o2; R_in = ∞.\n* The output swing is **not rail‑to‑rail**: V_out,low ≈ |V_th1| and V_out,high < V_DD, so the noise margins are reduced compared with a full‑swing CMOS inverter.",
        "format": "markdown",
        "sha256": "c40e0949c166d55a1f7ed8012c0c7bce8e16e1d3f2c7d8690ef6ba078289e4e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies both devices as PMOS, M2 as the common-source input device, M1 as the diode-connected PMOS load, and gives the required gain Av ≈ −gm2/gm1. The additional output-swing discussion is consistent with the allowed framing.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1416,
        "output_tokens": 16997,
        "total_tokens": 18413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1416,
        "output_tokens": 16997,
        "total_tokens": 18413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15864,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nThe two symbols are **PMOS** transistors (the bulk arrow points *out* of the channel bar, and the bulk lead is tied to the top terminal in each case). Reading the terminals:\n\n* **M2 (top):** source = $V_{DD}$, bulk = $V_{DD}$, gate = $V_{in}$, drain = $V_{out}$ → a **common‑source** stage.\n* **M1 (bottom):** gate = 0, **drain = 0** (ground), source = $V_{out}$, bulk = $V_{out}$ → gate is tied to drain, i.e. M1 is a **diode‑connected PMOS** (hence it is *always* in saturation and acts as the load).\n\nCurrent therefore flows $V_{DD}\\to M2\\to V_{out}\\to M1\\to 0$. (If the devices were mis‑read as NMOS, M1 would have $V_{GS}=V_{DS}$‑with‑gate = source = 0, i.e. it would be permanently off and the circuit would carry no current – so the PMOS reading is the only one that gives a functioning circuit.)\n\nAssumptions below: same $\\mu_p C_{ox}$ for both, bulk tied to source on each device (no body effect), and for the DC part we neglect channel‑length modulation ($\\lambda=0$). Let\n\n$$K_i=\\tfrac{1}{2}\\mu_p C_{ox}\\tfrac{W}{L}\\Big|_i ,\\qquad m=\\sqrt{K_2/K_1}=\\sqrt{\\frac{(W/L)_2}{(W/L)_1}} .$$\n\n## 2. DC transfer $V_{out}(V_{in})$\n\nWith both devices in saturation the series currents are equal:\n\n$$K_1(V_{SG1}-V_{th})^2 = K_2(V_{SG2}-V_{th})^2$$\n\nwith $V_{SG1}=V_{out}-0=V_{out}$ and $V_{SG2}=V_{DD}-V_{in}$. Taking positive roots,\n\n$$V_{out}-V_{th}=m\\,(V_{DD}-V_{in}-V_{th})$$\n\n$$\\boxed{V_{out}=m\\,(V_{DD}-V_{in})+(1-m)\\,V_{th}}$$\n\nBecause the square‑law of the signal device (M2) is exactly cancelled by the square‑law of the diode‑connected load (M1), **the DC transfer is perfectly linear** in $V_{in}$: an inverting relation with slope $-m$ and DC offset $mV_{DD}+(1-m)V_{th}$.\n\n### Region‑of‑operation limits (both on & saturated)\n* M1 saturated: always (diode‑connected).\n* M2 saturated: $V_{out}\\le V_{in}+V_{th}\\;\\Rightarrow\\; V_{in}>\\dfrac{m\\,(V_{DD}-V_{th})}{m+1}$\n* Both ON: $V_{DD}-V_{in}>V_{th}\\;\\Rightarrow\\; V_{in}<V_{DD}-V_{th}$ (this is also the condition that $V_{out}>V_{th}$, i.e. M1 conducts).\n\nSo the linear expression above is valid for\n$$\\frac{m(V_{DD}-V_{th})}{m+1}<V_{in}<V_{DD}-V_{th}.$$\nFor $V_{in}>V_{DD}-V_{th}$ both devices are off and $V_{out}$ floats (≈ 0); for $V_{in}$ below the lower limit M2 enters triode and the transfer bends over (solve $K_1(V_{out}-V_{th})^2$ = M2 triode current in that case).\n\n## 3. Small‑signal analysis\n\nLet $v$ be the signal at $V_{out}$ and $v_{in}$ the signal at the M2 gate. Including $r_{o}$, the incremental current M2 injects into the node is $-g_{m2}v_{in}-v/r_{o2}$, and the incremental current M1 draws from the node (diode‑connected) is $v(g_{m1}+1/r_{o1})$. Equating them:\n\n$$\\boxed{A_v=\\frac{v}{v_{in}}=-\\frac{g_{m2}}{g_{m1}+\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}}}\\approx -\\frac{g_{m2}}{g_{m1}}=-\\,m}$$\n\nwhich equals the slope of the DC transfer, as it must. Other port quantities:\n\n* $R_{in}=\\infty$ (M2 gate).\n* $R_{out}=\\left(\\tfrac{1}{g_{m1}}\\right)\\!\\parallel r_{o1}\\parallel r_{o2}\\approx \\dfrac{1}{g_{m1}}$ (low, set by the diode load).\n\n## 4. Summary\n\nThe circuit is a **PMOS common‑source stage (M2) loaded by a diode‑connected PMOS (M1)**. The diode load forces M1 into saturation and presents a low impedance $\\approx1/g_{m1}$ at the output. The two square laws cancel, so the stage is a **linear inverting amplifier / level shifter** with gain $-m=-\\sqrt{(W/L)_2/(W/L)_1}$, DC offset $mV_{DD}+(1-m)V_{th}$, very high input resistance and low output resistance, valid over the $V_{in}$ range given above. By choosing the $W/L$ ratio it can be used to generate a bias voltage that tracks $V_{in}$ (e.g. a $V_{DD}$‑referred inverting buffer or a simple gain stage with a defined headroom).",
        "format": "markdown",
        "sha256": "00cd92aafbbc4763f2fc8e26f2a805e8329f311fbbecde9b2af1b31aa41aada4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Meets the full-credit rule: identifies both PMOS devices, M2 as the common-source input device, M1 as the diode-connected PMOS load with gate and drain at ground, and gives the gain Av ≈ −gm2/gm1. The extra operating-region discussion does not change the correct core analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1416,
        "output_tokens": 11364,
        "total_tokens": 12780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1416,
        "output_tokens": 11364,
        "total_tokens": 12780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10032,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Setting up the small‑signal model\n\nFor $R_{out}$ we AC‑ground $V_{DD}$, $V_{b1}$ and $V_{b2}$, then inject a test current $i_t$ at the output terminal (the drain of $M_1$) and measure the resulting voltage $v_t$. The output resistance is $R_{out}=v_t/i_t$.\n\n**Impedance at node X.** Node X is the source of $M_1$. Looking up from X into $M_2$, both the gate ($V_{b2}=0$) and the source ($V_{DD}=0$) of $M_2$ are at AC ground, so $v_{gs2}=0$ and the $g_{m2}v_{gs2}$ source vanishes. $M_2$ therefore looks like a simple resistance $r_{o2}$ from X to ground. Hence X is degenerated by\n\n$$R_S = r_{o2}$$\n\n**Resistance looking into $M_1$.** $M_1$ is a common‑source device viewed at its drain with its source degenerated by $R_S$. The standard result for this configuration is\n\n$$R_{out} = r_{o1}\\,(1+g_{m1}R_S) + R_S$$\n\nSubstituting $R_S = r_{o2}$:\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + g_{m1}\\,r_{o1}\\,r_{o2}}$$\n\n**Verification by node equations.** Let $v_x$ be the small‑signal voltage at X. KCL at X gives $v_x = v_t/(1+g_{m1}r_{o1}+r_{o1}/r_{o2})$, and the test current is $i_t = \\dfrac{v_t/r_{o2}}{1+g_{m1}r_{o1}+r_{o1}/r_{o2}}$, so $v_t/i_t = r_{o2}+g_{m1}r_{o1}r_{o2}+r_{o1}$, confirming the result.\n\n**High‑gain approximation.** Since $g_{m1}r_{o1}\\gg 1$ and $g_{m1}r_{o1}r_{o2}\\gg r_{o1},\\,r_{o2}$,\n\n$$R_{out} \\approx g_{m1}\\,r_{o1}\\,r_{o2}$$\n\ni.e. the familiar cascode output resistance (the boost factor $1+g_{m1}r_{o2}$ multiplies $r_{o1}$ because $M_1$'s source is degenerated by $r_{o2}$).\n\n*(Note: this is the reading consistent with the source arrows drawn at the top terminals – a PMOS cascode current source with $V_{DD}$ at the top – so the output terminal is the **drain** of $M_1$. If instead one were looking into the **source** of $M_1$, the resistance would be low, $\\approx 1/g_{m1}$, which is why the cascode's high impedance is only available at the drain side.)*",
        "format": "markdown",
        "sha256": "2b07fafa80bb14877a5dcc83cdf30e0af611a024d69c64ff084ae21fc499e960"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode arrangement, uses M2’s output resistance at node X, and assigns the cascode boost to M1, obtaining Rout = ro1 + ro2 + gm1·ro1·ro2. Omitting body effect is allowed.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2180,
        "output_tokens": 29353,
        "total_tokens": 31533,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2180,
        "output_tokens": 29353,
        "total_tokens": 31533,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28633,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Identifying the topology\n\nThe two PMOS transistors form a **cascode current source**. The output is taken at the drain of the bottom device $M_1$, the internal node $X$ is the source of $M_1$, and $M_2$ connects $X$ to $V_{DD}$.\n\n## Small‑signal analysis at node X\n\nFor $M_2$ both the gate ($V_{b2}$) and the source ($V_{DD}$) are AC grounds, so $v_{gs2}=0$ and the transistor simply looks like its output resistance $r_{o2}$ from $X$ to ground. Hence the source of $M_1$ is \"degenerated\" by $R_s = r_{o2}$.\n\n## Resistance looking into the drain of $M_1$\n\nWith $M_1$'s gate at AC ground and a degeneration $r_{o2}$ at its source, the resistance seen at its drain is\n\n$$R_{out} = r_{o1} + (1 + g_{m1} r_{o1})\\,r_{o2}$$\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + g_{m1}\\,r_{o1}\\,r_{o2} \\;\\approx\\; g_{m1}\\,r_{o1}\\,r_{o2}}$$\n\nfor a high‑gain transistor ($g_{m1}r_{o1}\\gg 1$).\n\n**Note:** If the body effect of $M_1$ is included (bulk tied to $V_{DD}$ so $v_{bs1}\\neq 0$), replace $g_{m1}$ in the product term by $(g_{m1}+g_{mb1})$:\n\n$$R_{out} \\approx \\big(1 + (g_{m1}+g_{mb1})r_{o1}\\big)r_{o2} + r_{o1}$$\n\nSo the output resistance is the familiar large cascode value, here governed by the bottom device $M_1$ because that is the device whose drain forms the output node.",
        "format": "markdown",
        "sha256": "94dd5f0a3ab7fd04bf336fea8715a248d5aeb0c8c487c0db4dc5c7d333e3b44e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the correct output-resistance expression, including the optional body-effect term.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2180,
        "output_tokens": 10176,
        "total_tokens": 12356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9700,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2180,
        "output_tokens": 10176,
        "total_tokens": 12356,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9700,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Identifying the topology\n\nBoth devices are PMOS pull‑up transistors stacked between $V_{DD}$ and the output node, with the intermediate node $X$.\n\n* **M2:** source = $V_{DD}$ (a.c. ground), drain = $X$, body = $V_{DD}$ = source → no body effect.\n* **M1:** source = $X$, drain = output, body = $X$ = source → no body effect.\n\nSo each body is tied to its own source; $g_{mb}$ does **not** appear. The circuit is a **PMOS cascode**, and $R_{out}$ is taken at the drain of M1, whose source sits at node $X$.\n\n## Computing $R_{out}$\n\nThe resistance looking \"up\" from node $X$ into M2 (a common‑source device with its source at a.c. ground) is simply\n\n$$R_X = r_{o2}$$\n\nThe resistance looking into the **drain** of M1, when its source is connected to an impedance $R_S = R_X$, is\n\n$$R_{in,drain} = r_{o1}\\big(1 + g_{m1}R_S\\big) + R_S$$\n\nSubstituting $R_S = r_{o2}$:\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + g_{m1}\\,r_{o1}\\,r_{o2}}$$\n\nSince normally $g_{m1}r_{o2} \\gg 1$, this is usually approximated as\n\n$$R_{out} \\approx g_{m1}\\,r_{o1}\\,r_{o2}$$\n\n(If desired, $r_{oi}=1/(\\lambda_i I_D)$ and $g_{m1}=2I_D/|V_{OV1}|$, so $R_{out}\\approx \\dfrac{1}{\\lambda_1\\lambda_2}\\cdot\\dfrac{2}{|V_{OV1}|}$, independent of $I_D$.)\n\n**Note:** Because the body of each transistor is connected to its source, no $g_{mb}$ term enters the result.",
        "format": "markdown",
        "sha256": "903486652ebc1980dc99076b11d362f00bcd3eb54ac6413821999e36c70b8655"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS cascode with M1 as the cascode device and gives the correct Rout expression and approximation. Body-effect treatment is optional under the golden solution; the extra current-scaling aside is not needed for the answer.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 2180,
        "output_tokens": 15670,
        "total_tokens": 17850,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15185,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 2180,
        "output_tokens": 15670,
        "total_tokens": 17850,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15185,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Identify M2's terminals.** In the stack, the top device M2 has its source at $V_{DD}$, its gate at $V_{b2}$, and its drain at node $X$ (node $X$ is the *source* of M1, so current flows $V_{DD}\\to X\\to$ bottom). For a PMOS the saturation condition is\n\n$$V_{SG2} > |V_{tp}| \\quad\\text{and}\\quad V_{SD2} \\ge V_{SG2}-|V_{tp}| = V_{OV2}$$\n\nSubstituting the terminal voltages of M2 ($V_{SG2}=V_{DD}-V_{b2}$, $V_{SD2}=V_{DD}-V_X$), the two requirements become\n\n1. **Turned on:** $\\;V_{b2} < V_{DD}-|V_{tp}|$\n2. **In saturation:** $\\;V_{DD}-V_X \\ge V_{OV2}\\;\\;\\Longleftrightarrow\\;\\; V_X \\le V_{b2}+|V_{tp}|$\n\nSo M2 stays in saturation as long as the drain voltage $V_X$ is held **low enough** (at least $V_{OV2}$ below its source).\n\n**How we actually enforce that.** Node $X$ is not a free node – it is the source of M1, so its DC level is fixed by M1's gate bias and the bias current: $V_X = V_{b1}+V_{SG1}$ (with $V_{SG1}=|V_{tp}|+V_{OV1}$ set by $I_D$ and $W/L$). Therefore M2's saturation is guaranteed by **choosing $V_{b1}$ (and the bias current) so that**\n\n$$V_{b1}+V_{SG1} \\le V_{b2}+|V_{tp}|$$\n\ni.e. $V_{b1}$ must be low (sufficiently negative) and $I_D$ not so large that $V_{OV1}$ pushes $V_X$ up. In other words, M1 acts as a saturated current source that clamps $X$ to a low DC level (and to a virtual ground for AC); by biasing M1 properly we make $V_X$ small enough that $V_{SD2}\\ge V_{OV2}$, which is exactly what keeps M2 in saturation and lets it provide the cascode \"virtual ground\" that yields the boosted $R_{out}$.\n\n**Summary:** pick $V_{b2}<V_{DD}-|V_{tp}|$ to turn M2 on, and pick $V_{b1}$ (with the matching bias current) so that $V_X\\le V_{b2}+|V_{tp}|$ (equivalently $V_{SX2}\\ge V_{OV2}$). When these hold, M2 is in saturation.",
        "format": "markdown",
        "sha256": "4fab292e1e736e71b1f276076c41c06c1e01920ebb099b18ae6fdf43f83099b3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses $V_X=V_{b1}+|V_{GS1}|$ to derive the required condition on $V_{b1}$. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2148,
        "output_tokens": 7733,
        "total_tokens": 9881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2148,
        "output_tokens": 7733,
        "total_tokens": 9881,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7089,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Reading the topology\n\nIn this cascode stack the node **X** is the *source* of $M_2$ and the *drain* of $M_1$; the *drain* of $M_2$ is tied to $V_{DD}$ (the highest potential in the circuit) and its gate to the fixed bias $V_{b2}$. So for $M_2$\n\n$$V_{D2}=V_{DD},\\qquad V_{S2}=V_X,\\qquad V_{G2}=V_{b2}$$\n\n## Saturation condition\n\n$M_2$ is in saturation iff $V_{DS2}\\ge V_{GS2}-V_{TH2}$, i.e.\n\n$$V_{DD}-V_X \\;\\ge\\; (V_{b2}-V_X)-V_{TH2}$$\n\nNotice that $V_X$ **cancels**, leaving the very simple design inequality\n\n$$\\boxed{V_{b2}\\;\\le\\;V_{DD}+V_{TH2}}$$\n\nor, written in terms of the over‑drive $V_{OV2}=V_{GS2}-V_{TH2}$,\n\n$$\\boxed{V_{OV2}\\;\\le\\;V_{DD}-V_X \\quad(\\text{headroom at node X})}$$\n\nFor $M_2$ to actually conduct we also need $V_{GS2}>V_{TH2}$, i.e. $V_{b2}>V_X+V_{TH2}$. Hence the allowable bias window is\n\n$$V_X+V_{TH2} \\;<\\; V_{b2} \\;<\\; V_{DD}+V_{TH2}$$\n\nwhose width is exactly $V_{DD}-V_X$.\n\n## How we actually ensure it\n\n1. **Choose a modest over‑drive for $M_2$** (e.g. $V_{OV2}\\approx 0.2\\text{–}0.4\\,$V) and set the bias as $V_{b2}=V_X+V_{OV2}$.\n2. **Make sure the headroom is enough:** $V_X$ (which is set by $V_{b1}$ and the bias current through $M_1$) must lie at least $V_{OV2}$ below $V_{DD}$, i.e. $V_X \\le V_{DD}-V_{OV2}$. Equivalently, do not push $V_{b2}$ above $V_{DD}+V_{TH2}$.\n\nBecause $M_2$'s drain sits at the maximum node voltage ($V_{DD}$) and its source $V_X$ is a DC‑fixed internal node, $V_{DS2}$ does **not** swing with the output signal. Therefore $M_2$ stays in saturation over the whole output swing automatically, as long as the DC bias satisfies the inequality above — only $M_1$'s region of operation is sensitive to the output voltage.\n\n*Note:* if the bulk of $M_2$ is tied to $V_{DD}$ (so $V_{SB2}=V_{DD}-V_X>0$), body effect raises the threshold to $V_{TH2}^{'}=V_{TH2}+\\gamma(\\sqrt{2\\phi_F+V_{SB2}}-\\sqrt{2\\phi_F})$; just replace $V_{TH2}$ by $V_{TH2}^{'}$ in the inequalities, which makes the headroom requirement a little tighter.\n\n**In short:** keep the gate bias $V_{b2}$ low enough that the over‑drive of $M_2$ is smaller than the supply headroom above node X ($V_{OV2}<V_{DD}-V_X$, i.e. $V_{b2}<V_{DD}+V_{TH2}$); then $V_{DS2}>V_{OV2}$ and $M_2$ is guaranteed to remain in saturation.",
        "format": "markdown",
        "sha256": "127d8af6faa8d6a9450d8dd1fdc493d98d7036fbb0b00414592000262b756c53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reverses M2’s PMOS terminals and applies an NMOS saturation condition, so its inequalities and Vb2-based design advice do not answer the actual circuit. It mentions node-X headroom, but misses that VX is set by Vb1 and the resulting condition on Vb1.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2148,
        "output_tokens": 17353,
        "total_tokens": 19501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2148,
        "output_tokens": 17353,
        "total_tokens": 19501,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16483,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "Look at the terminal assignments first. The arrow (source) of each PMOS is the *top* terminal, so current flows downward from $V_{DD}$ to the output:\n\n* $M_2$: $S = V_{DD}$, $G = V_{b2}$, $D = X$\n* $M_1$: $S = X$, $G = V_{b1}$, $D = V_{out}$\n\nSo for $M_2$ the source and gate sit at fixed DC potentials ($V_{DD}$ and $V_{b2}$); the only node that can move it out of saturation is its drain, node $X$.\n\n**Saturation conditions for $M_2$** (let $V_{TP}$ be the threshold magnitude):\n\n1. It must be ON:  $V_{SG2} = V_{DD} - V_{b2} > V_{TP}$  $\\Rightarrow$  $V_{b2} < V_{DD} - V_{TP}$\n2. It must be in saturation, not triode:  $V_{SD2} > V_{SG2} - V_{TP}$\n\n   i.e.  $V_{DD} - V_X > (V_{DD} - V_{b2}) - V_{TP}$, which simplifies to\n\n   $$V_X < V_{b2} + V_{TP} \\qquad(\\text{equivalently } V_{DG2} = V_X - V_{b2} < V_{TP})$$\n\nSo the practical rule is: **choose $V_{b2}$ so that the voltage at $X$ stays below $V_{b2}+V_{TP}$**, while also keeping $V_{b2} < V_{DD}-V_{TP}$.\n\nSince $X$ is set by the bias of $M_1$ (when $M_1$ is in saturation, $V_X = V_{b1} + V_{TP} + V_{OV1}$), this becomes a single design inequality on the two bias voltages:\n\n$$V_X - V_{TP} < V_{b2} < V_{DD} - V_{TP} \\quad\\Longleftrightarrow\\quad V_{b1} + V_{OV1} < V_{b2} < V_{DD} - V_{TP}$$\n\nIn words: pick $V_{b2}$ low enough that $M_2$ is on, but not so low that $V_X$ (clamped by $M_1$) exceeds $V_{b2}+V_{TP}$; in other words $V_{b2}$ must be a little *higher* than $V_{b1}$ (by at least the overdrive of $M_1$) and a little *lower* than $V_{DD}$. Add margin around this window so that small‑signal swing at node $X$ cannot push $M_2$ into the triode region. As long as $M_1$ is in saturation (which holds $V_X$ near $V_{b1}+V_{TP}+V_{OV1}$) and $V_{b2}$ obeys the inequality above, $M_2$ remains in saturation.",
        "format": "markdown",
        "sha256": "b113fba129280e6ca6aea794bbc2a1c9fdb1b177f1e4c872dddb5ea0edf65c72"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses VX = Vb1 + |VGS1| to derive the equivalent bias condition Vb2 − Vb1 ≥ M1’s overdrive (assuming equal thresholds).",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 2148,
        "output_tokens": 7661,
        "total_tokens": 9809,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 2148,
        "output_tokens": 7661,
        "total_tokens": 9809,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6957,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nIt is an **NMOS cascode voltage amplifier** with an *active* (current‑source) load.\n\n* **M₁** – common‑source stage (source grounded, gate = signal terminal $V_{in}$).\n* **M₂** – common‑gate stage (gate held at the d.c. bias $V_{b1}$ = a.c. ground, drain = $V_{out}$).\n* **$I_1$** – a current source from $V_{DD}$ that biases the stack and acts as the load (very high small‑signal resistance).\n* Node **X** = drain of M₁ / source of M₂.\n\nThe port marks are the usual convention: filled dot = d.c. port ($V_{b1}$), open circles = small‑signal ports ($V_{in},\\,V_{out}$). So for the a.c. analysis $v_{b1}=0$ and $v_{in}$ is the signal.\n\n---\n\n## 2. D.C. operating point\n\nBecause the gates draw no d.c. current and $V_{out}$ is open, the same current flows through both transistors:\n\n$$I_{D1}=I_{D2}=I_1$$\n\nM₁ in saturation fixes $V_X$ (with $V_{GS1}=V_{in}^{DC}$):\n$$I_1=\\tfrac12 k_n\\!_1\\,(V_{in}^{DC}-V_{th1})^2(1+\\lambda_1 V_X)$$\n\nM₂ must be biased into saturation, i.e.\n$$V_{GS2}=V_{b1}-V_X\\ge V_{th2},\\qquad V_{DS2}=V_{out}-V_X\\ge V_{OV2}$$\nand it carries the same current:\n$$I_1=\\tfrac12 k_n\\!_2\\,(V_{b1}-V_X-V_{th2})^2(1+\\lambda_2(V_{out}-V_X))$$\n\nThus $V_X$ is set by M₁, $V_{b1}$ is chosen as $V_{b1}\\approx V_X+V_{OV2}$ to put M₂ in saturation, and $V_{out}$ settles at $V_X+V_{DS2}$, which must stay below $V_{DD}-V_{CS,min}$ so that the load current source $I_1$ remains in saturation. The only design freedom left is the ratio $k_n\\!_1/k_n\\!_2$ (or $V_{b1}$) to place $V_X$ where it is needed.\n\n---\n\n## 3. Small‑signal model\n\nLet $v_x$ be the signal at node X and $v_o$ the signal at $V_{out}$.\nM₁: $v_{gs1}=v_{in}$, $v_{s1}=0$.\nM₂: $v_{gs2}=0-v_x=-v_x$ (gate at a.c. ground).\n\nUsing the standard hybrid‑$\\pi$ model ($g_{m1},r_{o1}$ and $g_{m2},r_{o2}$):\n\n* Current into M₁ drain (from X): $g_{m1}v_{in}+v_x/r_{o1}$\n* Current into M₂ source (from X): $g_{m2}v_x-(v_o-v_x)/r_{o2}$\n\nKCL at node X (no other branch):\n$$g_{m1}v_{in}+\\frac{v_x}{r_{o1}}+g_{m2}v_x-\\frac{v_o-v_x}{r_{o2}}=0 \\tag{1}$$\n\n---\n\n## 4. Results\n\n**Open‑circuit voltage gain.** With $V_{out}$ open, $i_{d2}=0\\Rightarrow (v_o-v_x)/r_{o2}=g_{m2}v_x$. Substituting in (1) gives $v_x=-g_{m1}r_{o1}\\,v_{in}$ and $v_o=(1+g_{m2}r_{o2})v_x$, hence\n\n$$\\boxed{A_{oc}=\\frac{v_o}{v_{in}}=-\\,g_{m1}r_{o1}\\,(1+g_{m2}r_{o2})\\;\\approx\\;-g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\n(Equivalently $A_{oc}\\approx -g_{m1}\\,R_{out}$.) Note that the gain is split: M₁ gives $-g_{m1}r_{o1}$ to node X, and the common‑gate M₂ multiplies by $1+g_{m2}r_{o2}$.\n\n**Input resistance:** $R_{in}=\\infty$ (MOS gate of M₁).\n\n**Output resistance** (the Thevenin resistance seen at $V_{out}$, with $v_{in}=0$ and a test source applied):\n\n$$\\boxed{R_{out}=r_{o1}+r_{o2}+g_{m2}\\,r_{o1}r_{o2}\\;\\approx\\;g_{m2}\\,r_{o1}r_{o2}}$$\n\nThis is the classic cascode result – roughly $g_{m2}r_{o1}$ times larger than a single stage.\n\n**Loaded gain.** With a load $R_L$ at $V_{out}$:\n\n$$A_v=A_{oc}\\,\\frac{R_L}{R_L+R_{out}}$$\n\n**With body effect.** If M₂'s bulk is tied to ground (not to its source), $V_{SB2}=V_X>0$ raises $V_{th2}$ and adds $g_{mb2}v_{sb2}$ to the M₂ small‑signal equations; this slightly lowers $g_{m2}$ and reduces $R_{out}$ and the gain. If the bulk is tied to the source, $g_{mb2}=0$ and the formulas above hold exactly.\n\n---\n\n## 5. Why a cascode (frequency / bandwidth view)\n\n* The high $R_{out}$ gives a large mid‑band gain and a high‑frequency pole $f_p\\simeq 1/[2\\pi R_{out}(C_{out}+C_L)]$.\n* Node X is a **low‑impedance** node when the output is loaded: $Z_X\\approx 1/g_{m2}$ (since the a.c. gain $v_x/v_{in}\\approx -g_{m1}/g_{m2}\\ll 1$). Therefore the Miller multiplication of $C_{gd1}$ is only $1+g_{m1}/g_{m2}\\approx 1$, instead of $1+g_{m1}R_L$ in a plain common‑source stage. The input capacitance drops to $\\approx C_{gs1}+C_{gd1}$, which is the main bandwidth advantage of the cascode.\n\n---\n\n### Summary\nThe figure is a **two‑stage NMOS cascode (CS + CG) amplifier** loaded by a current source $I_1$. It is biased so that $I_{D1}=I_{D2}=I_1$ and both devices are in saturation ($V_{b1}$ sets the source‑gate bias of M₂). Small‑signal characteristics:\n\n| Quantity | Expression | Approx. |\n|---|---|---|\n| $R_{in}$ | $\\infty$ | – |\n| $R_{out}$ | $r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}$ | $g_{m2}r_{o1}r_{o2}$ |\n| $A_{oc}$ | $-g_{m1}r_{o1}(1+g_{m2}r_{o2})$ | $-g_{m1}g_{m2}r_{o1}r_{o2}$ |\n| $A_v(R_L)$ | $A_{oc}\\,R_L/(R_L+R_{out})$ | – |\n\nIts purpose is to deliver a **large inverting voltage gain with a very high output resistance**, and, by keeping node X at a low a.c. impedance, to **suppress the Miller effect** and thereby improve bandwidth relative to a single common‑source stage.",
        "format": "markdown",
        "sha256": "5d729faaa2d006e812e2b070a5f564e4255beaa76d5dd0f32b1015e66af7576f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the equivalent ideal-current-source-load gain expression. Minor secondary caveats do not affect the required answer.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 14230,
        "total_tokens": 15337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 14230,
        "total_tokens": 15337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12354,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nIt is an **NMOS cascode amplifier** with an **active (current‑source) load**.\n\n* **M₁** – common‑source (CS) device: source to ground, gate = $V_{in}$, drain = node $X$. It provides the transconductance $g_{m1}$.\n* **M₂** – common‑gate (CG) \"cascode\" device: source = node $X$, gate = fixed bias $V_{b1}$ (AC ground), drain = $V_{out}$. It provides a large output impedance and shields $C_{gs2}$ from $V_{out}$.\n* **$I_1$** – the bias/load current source from $V_{DD}$ to $V_{out}$. It sets the DC operating current and (if its own $r_o$ is finite) appears in parallel with the stack at the output.\n\nThe current flows $V_{DD}\\to I_1\\to M_2\\to M_1\\to$ GND, consistent with two NMOS in series (arrows on the source terminals point outward).\n\n## 2. DC operating point\n\nBecause $I_1$ is the only path, the bias current is forced:\n\n$$I_{D1}=I_{D2}=I_1$$\n\nThe bias voltages must be chosen so that **both** transistors stay in saturation:\n\n* M₁ (CS): $V_X = V_{DS1}\\ge V_{OV1}$, with $V_{in}\\ge V_{th1}$ and $V_{in}$ set so that $I_{D1}=I_1$.\n* M₂ (CG): $V_{b1}-V_X\\ge V_{OV2}$ and $V_{out}-V_X\\ge V_{OV2}$.\n\nHence the usual design rule is $V_X \\approx V_{OV1}+V_{OV2}$ (or higher) and $V_{b1}=V_X+V_{OV2}$, i.e. $V_{b1}\\ge V_{OV1}+V_{OV2}$. This is what gives the cascode its wide output swing:\n\n$$V_{OV1}+V_{OV2}\\;\\lesssim\\;V_{out}\\;\\lesssim\\;V_{DD}-V_{headroom}(I_1)$$\n\n## 3. Small‑signal model\n\nOpen $I_1$ (ideal source), $V_{b1}$ = AC ground. With $v_{gs1}=v_{in}$, $v_{gs2}=-v_x$, and including each $r_o$:\n\n* **Node $X$:** $\\;g_{m1}v_{in}+\\dfrac{v_x}{r_{o1}}+g_{m2}v_x-\\dfrac{v_{out}-v_x}{r_{o2}}=0$\n* **Node $V_{out}$** (open, $R_L\\to\\infty$): $\\;-g_{m2}v_x+\\dfrac{v_{out}-v_x}{r_{o2}}=0\\;\\Rightarrow\\;v_{out}=v_x(1+g_{m2}r_{o2})$\n\nSolving the two equations:\n\n$$v_x=-g_{m1}r_{o1}\\,v_{in}$$\n\n(The M₂ source draws no small‑signal current when its drain is open, so M₁'s drain current flows only through $r_{o1}$.)\n\n## 4. Voltage gain\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-\\,g_{m1}\\,r_{o1}\\,(1+g_{m2}r_{o2})\\;\\approx\\;-g_{m1}g_{m2}\\,r_{o1}r_{o2}}$$\n\nNegative sign → inverting (from the CS stage). For large $g_mr_o$ the gain is the product of the two transconductances and the two output resistances — much larger than a single CS stage. If the load current source has finite $r_{o,I_1}$, it is simply placed in parallel at the output, reducing the magnitude.\n\n## 5. Output resistance\n\nApply a test current at $V_{out}$ with $v_{in}=0$:\n\n$$\\boxed{R_{out}=r_{o1}(1+g_{m2}r_{o2})+r_{o2}\\;\\approx\\;g_{m2}\\,r_{o1}r_{o2}}$$\n\n(with an ideal load; with a real load $I_1$ use $R_{out}=r_{o,I_1}\\parallel[\\,r_{o1}(1+g_{m2}r_{o2})+r_{o2}\\,]$). This is the classic cascode result: $r_{o1}$ is \"boosted\" by $(1+g_{m2}r_{o2})$.\n\n## 6. Input resistance\n\nThe signal enters the gate of M₁, so $R_{in}\\to\\infty$ (MOS gate). The node $X$ sees the CG input resistance $R_{in,CG}=(r_{o2}+R_L)/(1+g_{m2}r_{o2})$ in parallel with $r_{o1}$, which sets the first internal node, but it does not load the external $V_{in}$ terminal.\n\n## 7. High‑frequency / bandwidth\n\nBecause the gate of M₂ is at AC ground, $C_{gs2}$ appears as a plain $C_{gs2}$ from $X$ to ground — **not** multiplied by the large gain. The cascode therefore removes the Miller multiplication that a second CS stage would impose on $V_{out}$, pushing the dominant pole up and improving the gain–bandwidth product relative to a two‑stage CS chain.\n\n## 8. Summary of key results\n\n| Quantity | Expression |\n|---|---|\n| Bias current | $I_{D1}=I_{D2}=I_1$ |\n| Bias constraint | $V_{b1}\\ge V_{OV1}+V_{OV2}$ |\n| Gain | $-g_{m1}r_{o1}(1+g_{m2}r_{o2})\\approx -g_{m1}g_{m2}r_{o1}r_{o2}$ |\n| Output resistance | $r_{o1}(1+g_{m2}r_{o2})+r_{o2}\\approx g_{m2}r_{o1}r_{o2}$ |\n| Input resistance | $\\infty$ |\n| $V_{out}$ swing | $V_{OV1}+V_{OV2}\\;\\lesssim\\;V_{out}\\;\\lesssim\\;V_{DD}-V_{I_1,headroom}$ |\n\nIn short: M₁ (CS) converts $V_{in}$ to a current, M₂ (CG) converts that current at a low‑gain internal node into a large output voltage across the high‑impedance stack, and $I_1$ biases the chain while acting as the load — yielding a high‑gain, high‑output‑impedance, wide‑swing, and bandwidth‑enhanced amplifier.",
        "format": "markdown",
        "sha256": "3d0c06dcf15d3c22682a70409957e32a75ec3a44f9c4196a2a830b04bd747f62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and gives the accepted ideal-load gain expression. Omitting body effect is allowed by the full-credit rule.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 15535,
        "total_tokens": 16642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1107,
        "output_tokens": 15535,
        "total_tokens": 16642,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nIt is a **two‑stage NMOS cascode amplifier** with an **active (current‑source) load**.\n\n| Transistor | Drain | Gate | Source | Role |\n|------------|-------|------|--------|------|\n| M₁ | node X | $V_{in}$ | 0 V | common‑source (input) device |\n| M₂ | $V_{out}$ | $V_{b1}$ | node X | common‑gate (cascode) device, gate at **AC ground** |\n\n* $V_{b1}$ is a fixed DC bias (the “b” = bias), so the gate of M₂ is an AC short.\n* The current source $I_1$ (arrow into the node) is the load; it fixes the DC bias current and, in small signal, appears as a finite output resistance $r_{oI}$ (ideal ⇒ $r_{oI}\\to\\infty$).\n* $V_{out}$ is taken at the drain of M₂ (the high‑impedance node).\n\n**DC bias.** With no gate currents, $I_{D1}=I_{D2}=I_1$. Both devices are designed for saturation:\n\n* M₁: $I_1=\\tfrac12 k_n'(W/L)_1\\,(V_{in}-V_{th1})^2(1+\\lambda_1 V_X)$, requires $V_X\\ge V_{in}-V_{th1}$.\n* M₂: $V_{GS2}=V_{b1}-V_X=V_{ov2}$, so **$V_X\\simeq V_{b1}-V_{ov2}$** (set by the bias, *independent* of $V_{out}$). M₂ needs $V_{out}-V_{b1}\\ge V_{ov2}$.\n\nConsequences: choosing $V_{b1}\\ge V_{ov1}+V_{ov2}$ keeps M₁ in saturation, and the minimum $V_{out}$ for full saturation is $\\approx V_{ov1}+2V_{ov2}$ (the usual cascode head‑room penalty). The key DC benefit is that the drain of M₁ (node X) is held at a fixed low voltage, so M₁ sees almost no drain‑voltage swing from the output → its channel‑length modulation (and $g_{m}$ variation) is suppressed.\n\n## 2. Small‑signal model\n\nLet $g_{m1},r_{o1}$ be M₁’s and $g_{m2},r_{o2}$ M₂’s parameters. With $v_{in}=0$, M₁ (gate = source = 0) presents just $r_{o1}$ from X to ground.\n\n**Input resistance:** $R_{in}=\\infty$ (gate of M₁).\n\n**Output resistance.** Look into the drain of M₂ with its source “degenerated” by $R_s=r_{o1}$ (gate AC‑grounded). The standard common‑gate result is\n\n$$R_{\\text{in,drain of M2}}=r_{o2}+(1+g_{m2}r_{o2})\\,r_{o1}=r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}.$$\n\nThis is in parallel with the load resistance $r_{oI}$:\n\n$$\\boxed{R_{out}=\\big[r_{o1}+r_{o2}+g_{m2}r_{o1}r_{o2}\\big]\\;\\|\\;r_{oI}\\;\\approx\\;g_{m2}r_{o1}r_{o2}\\;\\|\\;r_{oI}}$$\n\nSo the cascode multiplies the output resistance by $\\approx g_{m2}r_{o1}$ compared with a single CS stage — this is the whole point of the topology.\n\n**Voltage gain.** The transconductance of M₁ pushes $g_{m1}v_{in}$ into node X; because the cascode forces node X to a *virtual ground* (see §3), essentially all of this current is delivered to $R_{out}$. Solving the node equations (X and $V_{out}$) gives, in general,\n\n$$A_v=\\frac{v_{out}}{v_{in}}\\approx -g_{m1}\\,R_{out}.$$\n\nWith an **ideal** current‑source load ($r_{oI}\\to\\infty$) the exact result is\n\n$$\\boxed{A_v=-g_{m1}r_{o1}\\,(1+g_{m2}r_{o2})\\;\\approx\\;-g_{m1}g_{m2}r_{o1}r_{o2}}$$\n\n(If $r_{oI}$ is the dominant output resistance, then $A_v\\approx -g_{m1}r_{oI}$.) The stage transconductance is $G_m\\simeq g_{m1}$.\n\n## 3. Why a cascode (high‑frequency behaviour)\n\nThe internal node X is held at ≈ AC ground. Indeed, combining the gain with the relation at X shows\n\n$$\\frac{v_X}{v_{in}}\\simeq -\\frac{1}{g_{m2}}\\quad(\\text{small}),$$\n\ni.e. the drain of M₁ does **not** swing. Therefore the gate‑drain capacitance $C_{gd1}$ of the *input* device suffers almost **no Miller multiplication** (effective input cap $\\approx C_{gs1}+C_{gd1}$ instead of $C_{gs1}+(1+|A_{vX}|)C_{gd1}$). Combined with the high $R_{out}$, this yields both **high gain** and a **higher gain‑bandwidth product / wider bandwidth** than a plain common‑source stage, while keeping $R_{in}=\\infty$.\n\n## 4. Summary of key figures\n\n* Topology: CS (M₁) + CG cascode (M₂) + current‑source load $I_1$.\n* $I_{D1}=I_{D2}=I_1$; $V_X\\simeq V_{b1}-V_{ov2}$ (bias set, output‑independent).\n* $R_{in}=\\infty$.\n* $R_{out}\\approx g_{m2}r_{o1}r_{o2}\\;\\|\\;r_{oI}$.\n* $A_v\\approx -g_{m1}R_{out}$ (ideal load: $-g_{m1}r_{o1}(1+g_{m2}r_{o2})$).\n* Node X ≈ virtual ground ⇒ low Miller effect ⇒ good bandwidth.\n* Trade‑off: needs extra head‑room ($V_{out}\\gtrsim V_{ov1}+2V_{ov2}$) and a carefully chosen $V_{b1}$.\n\nIn short, the circuit is a **high‑gain, high‑output‑impedance cascode voltage amplifier**, the standard building block for amplifier stages and for high‑impedance bias/current‑mirror nodes.",
        "format": "markdown",
        "sha256": "7e69fa186fee5d138a793e92fb028e6a37af00445f5b1e90df4a409aec47bd5b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-source NMOS input device and M₂ as the common-gate NMOS cascode, and gives the equivalent ideal-load gain −gₘ₁rₒ₁(1+gₘ₂rₒ₂). Per the full-credit rule, the incorrect virtual-ground claim does not reduce the score.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1107,
        "output_tokens": 14939,
        "total_tokens": 16046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1107,
        "output_tokens": 14939,
        "total_tokens": 16046,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13350,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – this is not a cascode.**\n\nA cascode is built from **two transistors of the *same* type** (both n‑channel or both p‑channel) stacked in series, with the input applied to the gate of the *bottom* device (common‑source) and a *DC* bias applied to the gate of the *top* device (common‑gate). The top device's source is tied to the bottom device's drain so that that node is at (nearly) AC ground.\n\nThe wiring in the figure *looks* like that (V_in → M1 gate, V_b1 → M2 gate, M1 and M2 in series, R_D to V_DD), but the **device symbols do not match a cascode**:\n\n- The body/source arrow of **M1** is on its *upper* terminal and points *toward* the channel.\n- The body/source arrow of **M2** is on its *lower* terminal and points *away* from the channel.\n\nOpposite arrow directions / opposite source‑terminal positions mean the two devices are of **opposite polarity** (one NMOS, one PMOS). A cascode cannot be formed from an NMOS stacked on a PMOS in this way – the middle node cannot be the source of both an n‑device and a p‑device, the top device is not a true common‑gate stage, and the small‑signal model does not give the high output resistance / voltage gain that defines a cascode.\n\nFor it to be a genuine cascode, both transistors would have to be the same type, i.e. both arrows would have to be on the same relative terminal and point the same way (e.g. both n‑channel, with both source arrows on the lower lead). Since that is not the case here, the circuit is **not** a cascode structure.",
        "format": "markdown",
        "sha256": "8a4b95d57bcb323e9dac9a0696ac3a79bb195d08b24fe86f07d921fc430627a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The conclusion is correct, and it recognizes the opposite device polarities, but it mischaracterizes the wiring as a series stack and does not identify M1 as a PMOS source follower with its drain grounded. It therefore misses the essential reason the circuit is not a cascode.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1168,
        "output_tokens": 7812,
        "total_tokens": 8980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7411,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1168,
        "output_tokens": 7812,
        "total_tokens": 8980,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7411,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The circuit is a standard MOS cascode amplifier.\n\nTo see why, look at the operating configuration of each transistor:\n\n- **M₁ (bottom device) – common‑source.** Its gate receives the input signal $V_{in}$, its source is tied to ground, and its drain is the internal (cascode) node. So the signal enters here as a CS stage.\n- **M₂ (top device) – common‑gate.** Its gate is held at the fixed bias $V_{b1}$, which is an **AC ground**, so the signal that arrives at its source (the cascode node, i.e. M₁'s drain) is passed to its drain. The gate being AC‑grounded is exactly what makes this a common‑gate stage rather than a second CS stage.\n- **Output** is taken from M₂'s drain through the load $R_D$ to $V_{DD}$, giving $V_{out}$.\n\nStacking a common‑source stage (M₁) directly into a common‑gate stage (M₂) is the definition of a cascode. The signal path is $V_{in} \\to$ M₁ gate $\\to$ M₁ drain (= M₂ source) $\\to$ M₂ drain $= V_{out}$, with M₂'s gate at AC ground — the textbook cascode topology.\n\nA couple of checks that confirm (rather than disprove) the cascode identification:\n\n- The input is on the **bottom** device's gate, not the top one. If $V_{in}$ were on M₂'s gate and $V_{b1}$ on M₁'s, the stage assignments would be reversed and it would *not* be a cascode. Here it's correct.\n- $V_{b1}$ is a DC bias (AC ground), which is required for M₂ to act as a common‑gate buffer. If $V_{b1}$ were a signal input, the top device would be common‑source and the structure would not be a cascode.\n\nThe practical payoff of this arrangement is the high output impedance and high voltage gain of the cascode, together with the small Miller capacitance at the cascode node (improving high‑frequency response).\n\nSo the figure does indeed show a cascode structure.",
        "format": "markdown",
        "sha256": "c7c46c1dea7c10178290b87bc3f23294b9660220d4123a1f5cd24907910767db"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M₁ is a PMOS source follower with its drain grounded, not a common-source device, so the circuit lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1168,
        "output_tokens": 4381,
        "total_tokens": 5549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1168,
        "output_tokens": 4381,
        "total_tokens": 5549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – the circuit as drawn is *not* a cascode.**\n\nA cascode is a *common‑source* stage (the input device) with a *common‑gate* stage (the bias‑ed device) stacked on top, so that the internal node is the **drain of the lower device = source of the upper device**, and the lower device's source sits at AC ground.\n\nLook at how the body/source arrows are drawn:\n\n- **M₁:** the arrow is on the *upper* terminal, i.e. the node that joins M₁ and M₂. By the standard symbol convention that terminal is the **source**. The lower terminal (connected to ground) is therefore the **drain**. So M₁ has its gate = V_in, drain = AC ground, source = internal node → this is a **common‑drain (source‑follower)**, *not* a common‑source stage.\n- **M₂:** the arrow is on the *lower* terminal (the internal node), so its source is the internal node, its drain is the output node, and its gate is the AC‑ground bias V_b1 → this *is* a common‑gate stage.\n\nSo the topology is actually **source‑follower (M₁) feeding a common‑gate stage (M₂)**, not common‑source + common‑gate. The internal node is a *source–source* connection, not the drain–source connection a cascode requires. Consequently the gain, output impedance, and bandwidth are those of a follower + common‑gate chain, not of a cascode.\n\n**What would make it a cascode:** flip M₁'s orientation so that its source (and its body arrow) is the terminal tied to ground and its drain is the internal node. Then M₁ becomes common‑source and its drain ties to M₂'s source, giving the proper cascode (M₁ common‑source, M₂ common‑gate, both of the same device type). In the figure shown, that condition is not met, so it is **not** a cascode.",
        "format": "markdown",
        "sha256": "4bdfd662ff91e7d05d6a2738e00b1158a13959a9146fc05a3960d523215760a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the circuit is not a cascode: M1 has its source at the internal node and drain at ground, so it is a source follower, while M2 is common-gate. The extra redesign suggestion is unnecessary but does not change the correct topology analysis.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1168,
        "output_tokens": 7516,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1168,
        "output_tokens": 7516,
        "total_tokens": 8684,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is caused by a capacitor connected from a high-impedance input node to a high-swing output node. If the voltage gain from input to output is large and inverted, that capacitor appears much larger at the input:\n\n\\[\nC_{\\text{in,Miller}} \\approx C_{fb}(1+|A_v|)\n\\]\n\nSo in a plain common-emitter/common-source amplifier, the device’s drain-to-gate or collector-to-base capacitance \\(C_{gd}\\) or \\(C_{cb}\\) is multiplied by the full voltage gain, greatly increasing the input capacitance and limiting bandwidth.\n\nIn a cascode, that multiplication is much smaller because the node connected to the input-side capacitance no longer swings with the full output gain.\n\nFor a MOSFET cascode:\n\n- Q1 is the common-source input device.\n- Q2 is the common-gate output device.\n- The drain of Q1 is connected to the source of Q2, which is a low-impedance node, approximately \\(1/g_{m2}\\).\n\nThe voltage gain from the gate of Q1 to the drain of Q1 is therefore only about:\n\n\\[\n\\frac{v_x}{v_{in}} \\approx -\\frac{g_{m1}}{g_{m2}}\n\\]\n\nIf both devices are biased similarly, this is about \\(-1\\), not a large gain like \\(-g_mR_L\\). Therefore the Miller multiplication on \\(C_{gd1}\\) is only about:\n\n\\[\nC_{gd1}(1 + |g_{m1}/g_{m2}|) \\approx 2C_{gd1}\n\\]\n\ninstead of:\n\n\\[\nC_{gd1}(1 + g_{m1}R_L)\n\\]\n\nThe upper device’s output capacitance \\(C_{gd2}\\) is connected between its gate, which is at AC ground, and the output. It therefore appears mostly as an output capacitance, not as a large Miller capacitance at the input.\n\nThe same idea applies to a BJT cascode:\n\n- Q1’s collector-to-base capacitance \\(C_{cb1}\\) is connected from base to the emitter of Q2.\n- That node has low impedance, about \\(r_{e2}\\), so the voltage gain from Q1’s base to Q1’s collector is small, often near \\(-1\\).\n- Q2’s collector-to-base capacitance \\(C_{cb2}\\) has its base at AC ground, so it does not produce a large Miller effect at the input.\n\nIn short: a cascode splits the amplifier into a low-gain first stage and a high-output-impedance second stage. The large voltage swing is moved away from the node connected back to the input, so the Miller multiplication is greatly reduced.",
        "format": "markdown",
        "sha256": "fb77718b08d5a60fb67a077ebab7d55f276b0827365b8cae9623749d1cdf39fd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and shows that the gain across the input device’s feedback capacitance is about −1, giving roughly a 2× Miller factor rather than the full-stage gain. Minor omitted body-effect detail does not change the conclusion.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 66,
        "output_tokens": 4144,
        "total_tokens": 4210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 66,
        "output_tokens": 4144,
        "total_tokens": 4210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3532,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "The Miller effect occurs when a capacitor connects a high-gain inverting output back to the input. A capacitor \\(C\\) spanning an amplifier with voltage gain \\(A_v\\) appears at the input as\n\n\\[\nC_M \\approx C(1-A_v) \\approx C(1+|A_v|)\n\\]\n\nfor an inverting amplifier. In a simple common-emitter or common-source stage, the collector-base or drain-gate capacitance \\(C_{cb}\\) or \\(C_{gd}\\) connects the input directly to the high-voltage-swing output node, so it is strongly multiplied.\n\nIn a cascode, that high-gain output node is not directly connected to the input device’s capacitance.\n\nTypical cascode structure:\n\n- First transistor: common-emitter/common-source, provides input current conversion.\n- Second transistor: common-base/common-gate, base/gate is AC-grounded.\n- The collector/drain of the first transistor is connected to the emitter/source of the second transistor.\n\nThat internal node is a low-impedance, low-swing node because the common-base/common-gate input looks like a small resistance, roughly \\(1/g_m\\). Therefore the voltage gain from the input to that internal node is small, often on the order of unity or less, not the full large output gain.\n\nSo the feedthrough capacitance \\(C_{cb1}\\) or \\(C_{gd1}\\) of the first transistor sees only the small gain of the first stage:\n\n\\[\nC_{\\text{in}} \\approx C_{gs1} + C_{gd1}(1-A_1)\n\\]\n\nwhere \\(A_1\\) is small. The upper transistor’s \\(C_{gd2}\\) is connected from the output to an AC-grounded gate/base, so it mainly adds output capacitance but does not create a large Miller capacitance at the input.\n\nIn short: the cascode breaks the high gain into two parts. The first stage has little voltage gain, so its parasitic capacitance is not strongly multiplied; the second stage has high gain but its gate/base is AC grounded, so its output capacitance does not feed back to the input. The result is a much smaller effective input capacitance and a less pronounced Miller effect.",
        "format": "markdown",
        "sha256": "eace318bfe302b1fc4fab37c4b67dd5cee4be56a160a9d642be125104ac39201"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance, low-swing cascode node and explains that M1’s Cgd sees only an order-unity gain rather than the full output gain. Calling that gain “small” is slightly imprecise, but does not undermine the essential explanation.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 66,
        "output_tokens": 6001,
        "total_tokens": 6067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5517,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 66,
        "output_tokens": 6001,
        "total_tokens": 6067,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5517,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is reduced in a cascode because the capacitors that would normally bridge the **input** and the **high-gain output** are no longer connected across that full gain.\n\nFor a capacitor \\(C\\) between input and output of an inverting amplifier,\n\n\\[\ni_{\\text{in,Miller}} = C\\frac{d(v_{\\text{out}}-v_{\\text{in}})}{dt}\n= C(1-A_v)\\frac{dv_{\\text{in}}}{dt}\n\\]\n\nso the effective input capacitance becomes\n\n\\[\nC_{\\text{in}} \\approx C_{\\text{intrinsic}} + C(1-A_v)\n\\]\n\nFor a single common-source/common-emitter stage, \\(A_v \\approx -g_mR_L\\), which can be large, so\n\n\\[\nC_{\\text{in}} \\approx C_{\\text{intrinsic}} + C(1+g_mR_L)\n\\]\n\nwhich greatly increases the input capacitance and reduces bandwidth.\n\nIn a cascode:\n\n1. **The input transistor’s drain/collector is not the final output.**  \n   It is connected to the source/emitter of the second, common-gate/common-base transistor.\n\n2. **That intermediate node has small gain.**  \n   The second transistor presents a low impedance at the intermediate node. For matched devices,\n\n   \\[\n   \\frac{v_x}{v_{\\text{in}}} \\approx -\\frac{g_{m1}}{g_{m2}} \\approx -1\n   \\]\n\n   So the capacitor from the input transistor’s gate/base to its drain/collector sees only a gain of order 1, not the full load gain. Its Miller multiplication is roughly\n\n   \\[\n   1 - (-1) \\approx 2\n   \\]\n\n   instead of \\(1+g_mR_L\\).\n\n3. **The upper transistor’s gate/base is at AC ground.**  \n   The upper transistor’s gate-drain or base-collector capacitance is therefore connected from output to AC ground, not from input to output. It mainly adds output capacitance, rather than creating a large Miller capacitance at the input.\n\nSo in a cascode, the large voltage swing at the output is “shielded” from the input by the common-gate/common-base stage. The Miller effect is not eliminated, but it is much less severe because the relevant feedback capacitances are no longer multiplied by the full voltage gain.",
        "format": "markdown",
        "sha256": "881bd96ecf32b1440c169a79fa6e850d0ddb9db5fe5ee0b0cdc0c9dd50af3b79"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance intermediate node and explains that the gain across the input transistor’s Cgd is about −1 for matched devices, giving a Miller factor of roughly 2 rather than the full stage gain. It also correctly notes that the effect is reduced, not eliminated.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 66,
        "output_tokens": 9255,
        "total_tokens": 9321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 66,
        "output_tokens": 9255,
        "total_tokens": 9321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8713,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic – device roles\n\nThe circuit is a **two‑transistor single‑stage amplifier**. The only pin assignment that allows a DC bias current to flow (M1 must be able to push current into the M2 branch) is:\n\n| Device | Type | Gate | Source | Drain | Bulk |\n|--------|------|------|--------|-------|------|\n| **M1** | PMOS | $V_{b2}$ (fixed bias) | $V_{DD}$ | $V_{out}$ | tied to source |\n| **M2** | NMOS | $V_{in}$ (signal) | $V_{b1}$ (fixed bias) | $V_{out}$ | $V_{b1}$ |\n\n* **M1** has both gate and source at fixed DC nodes, so $V_{SG1}=V_{DD}-V_{b2}$ is constant → **M1 is a constant‑current load** (a current source in saturation).\n* **M2** has the signal at its gate and a fixed (AC‑ground) source → **M2 is a common‑source input transistor**.\n* The two drains are joined at $V_{out}$, which is the output node.\n\nSo the topology is the classic **common‑source stage with a PMOS current‑source load**. (Note: if one instead interpreted the arrowed lead as the input, i.e. $V_{in}$ at the *source* and the gate at $V_{out}$, M1's drain current would have no DC return path and the stage would not bias – so the common‑source reading above is the physically correct one.)\n\n## 2. DC operating point\n\nBoth devices must be in saturation.\n\nM1 (PMOS):\n$$I_{D1}=\\tfrac{1}{2}k_p\\!\\left(\\tfrac{W}{L}\\right)_1\\!\\big(V_{SG1}-|V_{th1}|\\big)^2(1+\\lambda_1 V_{DS1}),\\quad V_{SG1}=V_{DD}-V_{b2}$$\n\nM2 (NMOS):\n$$I_{D2}=\\tfrac{1}{2}k_n\\!\\left(\\tfrac{W}{L}\\right)_2\\!\\big(V_{GS2}-V_{th2}\\big)^2(1+\\lambda_2 V_{DS2}),\\quad V_{GS2}=V_{in}-V_{b1}$$\n\nKCL at the output node forces $I_{D1}=I_{D2}=I_{D}$, and the output voltage is\n$$V_{out}=V_{DD}-V_{DS1}=V_{b1}+V_{DS2}.$$\n\nSaturation conditions:\n$$V_{DS1}>V_{SG1}-|V_{th1|}\\;\\Rightarrow\\; V_{out}<V_{b2}+|V_{th1}|$$\n$$V_{DS2}>V_{GS2}-V_{th2}\\;\\Rightarrow\\; V_{out}>V_{in}-V_{th2}$$\n\nHence the stage works when $\\;V_{in}-V_{th2}<V_{out}<V_{b2}+|V_{th1}|$. The bias $V_{b2}$ sets the quiescent current $I_D$; $V_{b1}$ sets the source/bulk potential of M2.\n\n## 3. Small‑signal model\n\nWith $V_{DD}$, $V_{b1}$, $V_{b2}$ all AC grounds:\n\n* **M2**: $v_{gs2}=v_{in}$, and because source and bulk are both at $V_{b1}$ (AC ground), $v_{bs2}=0$ → **no body‑effect term** ($g_{m b2}$ does not appear). Its small‑signal model is $g_{m2}v_{in}$ in parallel with $r_{o2}$.\n* **M1**: gate and source are AC ground → $v_{gs1}=0$, so its controlled source is zero; it reduces to a passive resistor $r_{o1}$ from $V_{out}$ to AC ground.\n\nAt the output node (with an optional load $R_L$):\n$$g_{m2}v_{in}=\\frac{v_{out}}{r_{o1}}+\\frac{v_{out}}{r_{o2}}+\\frac{v_{out}}{R_L}$$\n\n## 4. Key small‑signal parameters\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-g_{m2}\\,(r_{o1}\\parallel r_{o2}\\parallel R_L)}$$\n\n$$R_{out}=r_{o1}\\parallel r_{o2}\\qquad R_{in}=\\infty\\;\\text{(MOS gate)}$$\n\nThe PMOS current‑source load provides the high output resistance $r_{o1}$, which is why the gain magnitude $|A_v|\\approx g_{m2}(r_{o1}\\parallel r_{o2})$ is much larger than $g_{m2}R_{pull}$ would be with a resistive load. The stage is inverting.\n\n## 5. Remarks on the bias nodes\n\n* **$V_{b2}$** is the *bias* of the load: it programs the constant current $I_D$ (and thus sets $V_{out}$) but carries no signal.\n* **$V_{b1}$** is the *source/bulk* bias of M2. Because it is tied to the source, the body effect is absent. If in a variant the bulk were held at a different AC potential than the source, an extra term $g_{m b2}\\,v_{bs}$ would appear and the gain would become $-g_{m2}(r_{o1}\\parallel r_{o2})$ only when $v_{bs}=0$; otherwise the effective transconductance is reduced and an extra feed‑forward path appears.\n* **Bandwidth:** the only significant low‑frequency pole is at the output, $f_p=\\dfrac{1}{2\\pi R_{out}(C_{out})}$, where $C_{out}$ includes the drain capacitances of M1, M2 and any external load; $g_{m2}$ and $r_o$'s do not add internal capacitance at low frequency.\n\n### Bottom line\nThe circuit is a **common‑source amplifier with a PMOS current‑source load**, biased by $V_{b1}$ (input device source/bulk) and $V_{b2}$ (load). It is inverting, has infinite input resistance, output resistance $r_{o1}\\parallel r_{o2}$, and mid‑band gain $-g_{m2}(r_{o1}\\parallel r_{o2})$.",
        "format": "markdown",
        "sha256": "3c023df8dc0bd8608427f4562af24dc6e3ac61fdaadf07270b67aa81a2131426"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer places Vin at M2’s gate and identifies a common-source stage. The circuit is a common-gate NMOS stage with Vin at M2’s source, giving non-inverting gain and low input resistance; the golden solution explicitly assigns 0 for the gate-input interpretation.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1035,
        "output_tokens": 19718,
        "total_tokens": 20753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1035,
        "output_tokens": 19718,
        "total_tokens": 20753,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18213,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Device identification and topology\n\nReading the symbols (M2 is drawn rotated 90°; the line that carries the arrow is the **source**, the parallel line without the arrow is the **gate**):\n\n| Transistor | Type | Source | Gate | Drain | Bulk |\n|------------|------|--------|------|-------|------|\n| M1 | PMOS | $V_{DD}$ | $V_{b2}$ | $V_{out}$ | tied to source |\n| M2 | NMOS | $V_{in}$ | $V_{b1}$ | $V_{out}$ | tied to source |\n\nSo the two drains are tied together at $V_{out}$, M1 is a **PMOS current‑source load** (gate biased at $V_{b2}$), and M2 is the active device whose **input is applied to its source** while its gate is held at the d.c. bias $V_{b1}$.\n\n> **The circuit is a common‑gate (CG) amplifier with a PMOS current‑source load.**\n> ($V_{b1}$ and $V_{b2}$ are the two gate biases, $V_{in}$ the input, $V_{out}$ the output – every label is used as a bias/signal, which is exactly the CG arrangement.)\n\nBecause each bulk is tied to its own source, $V_{SB}=0$ and **there is no body‑effect** ($g_{mb}=0$).\n\n## 2. D.C. operating point\n\nThe output is high‑impedance, so the d.c. currents are equal: $I_{D1}=I_{D2}=I_D$.\n\n- M1 (saturation, needs $V_{DD}-V_{out}\\ge V_{SG1}-|V_{tp}|$):\n$$I_{D1}=\\tfrac{1}{2}k_p\\!\\left(\\tfrac{W}{L}\\right)_1\\!\\big(V_{DD}-V_{b2}-|V_{tp}|\\big)^2(1+\\lambda_1 V_{SD1})$$\n- M2 (saturation, needs $V_{out}-V_{in}\\ge V_{GS2}-V_{tn}$):\n$$I_{D2}=\\tfrac{1}{2}k_n\\!\\left(\\tfrac{W}{L}\\right)_2\\!\\big(V_{b1}-V_{in}-V_{tn}\\big)^2(1+\\lambda_2 V_{DS2})$$\n\nThe pair of bias voltages $V_{b1},V_{b2}$ (and the d.c. level of $V_{in}$) set $I_D$; $V_{out}$ then settles so that both transistors stay in saturation (typically $V_{out}$ is a few hundred mV below $V_{DD}$ and a few hundred mV above $V_{in}$).\n\n## 3. Small‑signal model\n\nA.c. grounds: $V_{DD}$, $V_{b1}$, $V_{b2}$.\n\n- M1 has $v_{gs1}=v_{sb1}=0$ ⇒ it contributes only $r_{o1}$ from $v_{out}$ to a.c. ground.\n- M2 (gate at a.c. ground) is a true common‑gate device: $v_{gs2}=-v_{in}$, with $r_{o2}$ between drain and source and a controlled source $g_{m2}v_{gs2}$.\n\n**Voltage gain.** KCL at $v_{out}$ (output open):\n$$\\frac{v_{out}}{r_{o1}}+g_{m2}(-v_{in})+\\frac{v_{out}-v_{in}}{r_{o2}}=0$$\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{r_{o1}(1+g_{m2}r_{o2})}{r_{o1}+r_{o2}}\\;\\approx\\; g_{m2}\\,(r_{o1}\\parallel r_{o2})\\quad(g_{m2}r_{o2}\\gg1)}$$\nThe gain is **positive (non‑inverting)**, as expected for a CG stage.\n\n**Input resistance** (look into the source, gate grounded, drain loaded by $r_{o1}$):\n$$\\boxed{R_{in}=\\frac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}\\;\\approx\\;\\frac{1}{g_{m2}}\\ (\\text{if } r_{o1}\\lesssim r_{o2})}$$\ni.e. a **low** input resistance of order $1/g_{m2}$.\n\n**Output resistance** (set $v_{in}=0$ ⇒ M2 gate and source grounded ⇒ M2 looks like $r_{o2}$):\n$$\\boxed{R_{out}=r_{o1}\\parallel r_{o2}}$$\na **high** output resistance.\n\n## 4. Key characteristics / why use it\n\n- **Non‑inverting** voltage gain $\\approx g_{m2}(r_{o1}\\parallel r_{o2})$.\n- **Low $R_{in}$, high $R_{out}$** – useful for impedance matching and for driving a load without much loss of voltage swing into the load (the load is the high‑impedance current source M1).\n- **Wide bandwidth:** the gate is at a.c. ground, so the gate–source capacitance $C_{gs}$ appears directly at the input with **no Miller multiplication**; the dominant pole is set by the low $R_{in}$ and the input capacitance, and the output pole by $R_{out}$ and the load capacitance. This makes the CG stage a good high‑frequency / wideband building block (often cascaded with a CS stage to form a cascode).\n- No body effect here because each bulk is tied to its source. (If M2's bulk were instead tied to $V_{b1}$, an extra $g_{mb2}$ path from source to ground would appear, raising $R_{in}$ and slightly reducing gain.)\n\n**Summary:** M1 = PMOS current‑source load, M2 = NMOS common‑gate device; the stage provides a non‑inverting gain of about $g_{m2}(r_{o1}\\parallel r_{o2})$, low input impedance ($\\sim1/g_{m2}$), high output impedance ($r_{o1}\\parallel r_{o2}$), and a wide bandwidth because the gate is at a.c. ground.",
        "format": "markdown",
        "sha256": "d8f81e2825b281a2432e2634246873f6094a477327f7ec1868cfd38fbf67090b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, and gives the non-inverting gain and low input resistance. Its optional body-effect details do not undermine the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1035,
        "output_tokens": 27809,
        "total_tokens": 28844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1035,
        "output_tokens": 27809,
        "total_tokens": 28844,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26339,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Device identification\n\nReading the symbols (gate = the isolated plate; the arrow marks the source; the extra bar at the bottom of M2 is the bulk/substrate terminal):\n\n| Device | Type | Source | Gate | Drain | Body |\n|--------|------|--------|------|-------|------|\n| **M1** | PMOS | VDD | Vb2 | Vout | VDD (tied to source → no body effect) |\n| **M2** | NMOS | **Vin** | **Vout** | **Vout** | Vb1 |\n\nKey observations:\n\n* **M1** has its gate at a fixed bias `Vb2`, so it behaves as a **PMOS current‑source load** (its small‑signal gate and source are both at AC ground).\n* **M2** has its **gate and drain shorted to the output node** → it is a **diode‑connected NMOS**. Its source is driven by `Vin` and its bulk is at `Vb1`, so the **body effect is active** in M2 (and only in M2).\n* M1 and M2 are in **series** between VDD and Vin; the output is taken at the node between them. With `Vout` open, the same DC current flows through both.\n\n## 2. DC operating point\n\n* **M1 (PMOS):** in saturation if `Vout ≤ Vb2 − |Vth1|`.\n  `I1 = ½ kp (W/L)1 (VDD − Vb2 − |Vth1|)² (1 + λ1(VDD − Vout))`\n* **M2 (diode‑connected NMOS):** always in saturation whenever on, because `VGD2 = 0 < Vth2`.\n  `I2 = ½ kn (W/L)2 (Vout − Vin − Vth2(VSB2))² (1 + λ2(Vout − Vin))`\n  with `VGS2 = VDS2 = Vout − Vin` and `VSB2 = Vb1 − Vin`.\n* Series constraint: `I1 = I2`.\n\nFrom the M2 equation, `VGS2` is essentially fixed by the bias current set by M1, so\n\n> **Vout ≈ Vin + VGS2(bias)**  →  the output tracks the input with a fixed DC offset (the on‑voltage of M2). If `Vin` is so low that `Vout − Vin < Vth2`, M2 cuts off, the series current is zero, M1 also cuts off, and `Vout` is pulled up toward VDD.\n\nDesign constraint: keep `Vb1 ≤ Vin` so the M2 source–body junction is not forward‑biased.\n\n## 3. Small‑signal model (Vout unloaded)\n\n* M1 → just `ro1` from `vout` to AC ground (gate and source are AC ground, so no `gm1` term).\n* M2 (diode‑connected, `vg = vd = vout`, `vs = vin`, `vb = 0`):\n  drain current `i = gm2(vout−vin) + gmb2(−vin) + (vout−vin)/ro2`.\n\nKCL at the output node: `vout/ro1 + i = 0`.\n\n**Voltage gain**\n`Av = vout/vin = (gm2 + gmb2 + 1/ro2) / (1/ro1 + gm2 + gmb2 + 1/ro2)`\n\nBecause `1/ro1 > 0`, **|Av| is slightly less than 1** (≈ 1 when `ro1` is large). With a load `RL` at the output, simply add `1/RL` to the denominator.\n\n**Output resistance** (set `vin = 0`):\n`Rout = 1 / (1/ro1 + gm2 + 1/ro2) ≈ 1/gm2`  → **low**.\n\n**Input resistance** (look into `Vin`, solve the coupled node):\n`Rin = [1 + gm2·ro1 + ro1/ro2] / (gm2 + gmb2 + 1/ro2) ≈ ro1/gm2`  → **high**.\n\n## 4. Overall function and remarks\n\nThe circuit is a **CMOS voltage follower / level shifter**: it transfers `Vin` to `Vout` with **nearly unity gain, high input impedance and low output impedance**, while adding a fixed DC offset equal to `VGS2` (set by the M1 bias current and the M2 device ratio). It is the \"source‑referenced\" dual of the usual source follower (here the input is at the source and the output at the gate/drain of the diode‑connected device, with a current source providing the bias).\n\n* The offset and the sub‑unity gain come from the finite `ro1` and from the body‑effect term `gmb2` (because `VSB2 = Vb1 − Vin` varies with the input).\n* M1's bulk is at VDD, so it contributes only channel‑length modulation; M2's bulk at `Vb1` introduces the body effect that slightly degrades the gain.\n* The stage acts as a level detector/limiter at the extremes: `Vout → VDD` when `Vin` is low (M2 off), and `Vout = Vin + VGS2` when M2 is conducting.\n\nIn short: **M1 = PMOS current‑source load, M2 = diode‑connected NMOS with body bias; together they form a high‑Z‑in / low‑Z‑out, ≈ unity‑gain buffer with a programmable DC offset.**",
        "format": "markdown",
        "sha256": "0ade33afded6ed4edbb4be93f8dc9dbf2fe0f730c2f5878ee111d2250b44a8a6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies M2 as diode-connected, tying its gate to Vout instead of biasing it with Vb1. This changes the topology and leads to the opposite input-resistance and gain conclusions; the circuit is a common-gate stage with low input resistance and gain set by gm2(ro1 || ro2).",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1035,
        "output_tokens": 14731,
        "total_tokens": 15766,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1035,
        "output_tokens": 14731,
        "total_tokens": 15766,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\nAlthough the schematic contains five capacitors (C_GS, C_GD, C_DB, C_GD2, C_DB2), the number of poles equals the number of *independent* nodes that can store energy, not the number of capacitors. Tracing the small‑signal (AC) circuit:\n\n* The **gate of M₂** is tied to a DC supply → AC ground.\n* The **source (top) of M₂** is tied to a DC supply → AC ground.\n* Therefore M₂ contributes no new node; its drain, the drain of M₁, the V_out tap, and the right plates of C_GD2/C_DB2 are all one continuous wire → a **single output node**.\n* The gate of M₁ (the junction of R_S, C_GS, C_GD) is the **input node**.\n\nSo there are only **two** non‑ground nodes whose voltages can vary (the M₁ gate and the common output node), each carrying capacitance. The KCL equations at these two nodes yield a 2nd‑order denominator.\n\nHence the transfer function V_out/V_in has **2 poles** (and, in general, one zero from the C_GD feed‑through). The extra capacitors (C_GD2, C_DB2, and M₂'s r_o) merely add to the total capacitance and loading at the single output node; they do not create additional poles.\n\n**Answer: 2 poles.**",
        "format": "markdown",
        "sha256": "01ca17d5f84463548bdbef6ec5d8c7b79aa4c0ab5857f7591744cdf5eff051bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent nodes—the M1 gate and output—and assigns the listed capacitors to those nodes. The conclusion of two poles is correct.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1501,
        "output_tokens": 5534,
        "total_tokens": 7035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1501,
        "output_tokens": 5534,
        "total_tokens": 7035,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5211,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning – count the essential (dynamic) nodes:**\n\nTracing the small‑signal connections (DC supplies = AC ground, ideal $V_{in}$ = AC ground):\n\n* **Node X** = gate of $M_1$. It connects $R_s$ (to ground), $C_{GS}$ (to ground), and $C_{GD}$ (to the output node).\n* **Node O** = $V_{out}$ = drain of $M_1$ = drain of $M_2$ (all tied by wire). It connects $C_{DB}$, $C_{DB2}$ (to $V_{DD}$), $C_{GD2}$ (to the gate of $M_2$, which is grounded) – i.e. a total shunt capacitance $C_L = C_{DB}+C_{DB2}+C_{GD2}$ to ground – plus $C_{GD}$ to node X, and the output resistances $r_{o1}, r_{o2}$.\n* The gate of $M_2$ is grounded and its source is at $V_{DD}$, so $M_2$ is just a bias current source contributing $r_{o2}$; it introduces **no** extra node.\n\nSo the network has exactly **two** internal nodes, each holding an independent capacitor voltage ($V_X$ and $V_O$), with $C_{GD}$ coupling them (Miller effect) and no capacitor loop. The node equations give a 2×2 first‑order system, hence a second‑order characteristic polynomial.\n\nTherefore the transfer function $V_{out}/V_{in}$ has a second‑order denominator → **2 poles** (and, due to the $C_{GD}$ feedforward path, a zero as well).\n\n**Answer: 2**",
        "format": "markdown",
        "sha256": "0325b94ee0a72a95dba3e9bc9cdec63fc990cce07be8b43c9c7561a6a60bd1af"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the two dynamic nodes and assigns the capacitors to the right nodes, giving two poles. However, it incorrectly says there is no capacitor loop: CGS, CGD, and CDB do form a loop through ground.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1501,
        "output_tokens": 4143,
        "total_tokens": 5644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1501,
        "output_tokens": 4143,
        "total_tokens": 5644,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3746,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\nTo see this, redraw the circuit for small‑signal (AC) analysis:\n\n* Every DC battery is an ideal short to ground. Therefore M2's gate and M2's top terminal (its source) are both at **AC ground**.\n* With both gate and source of M2 at AC ground, M2 carries no gate‑driven current and simply looks like its output resistance $r_{o2}$ from $V_{out}$ to ground. Its capacitors $C_{GD2}$ and $C_{DB2}$ each have one plate at AC ground, so they both just load the $V_{out}$ node.\n* $M_1$ is a common‑source stage: its gate is node A, its drain is the $V_{out}$ node B.\n\nNow count the nodes that actually store energy (i.e. nodes with capacitance to ground, not shorted by an AC source):\n\n1. **Node A** – gate of $M_1$: holds $C_{GS}$ (and the input side of $C_{GD}$).\n2. **Node B** – $V_{out}$: holds $C_{DB} + C_{GD2} + C_{DB2}$ (and the output side of $C_{GD}$).\n\nNo other node is \"free\" – M2's gate and M2's source are pinned to AC ground by the bias supplies. The only coupling between the two state nodes is $C_{GD}$.\n\nA network of two capacitive nodes coupled by a single capacitor yields a **second‑order** transfer function, i.e. **two poles** (the $C_{GD}$ feed‑through also introduces one zero, but that does not add a pole).\n\n**Answer: 2 poles.**",
        "format": "markdown",
        "sha256": "dd4ca48679d8160e99b390a2f0a2510b34fcc1f84bae09e8ffaeb1bd05086e99"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M1 gate and output—and assigns the capacitors to the proper nodes. It also correctly treats CGD as coupling the nodes rather than adding a pole.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1501,
        "output_tokens": 3348,
        "total_tokens": 4849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1501,
        "output_tokens": 3348,
        "total_tokens": 4849,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2966,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Topology\n\nReading the schematic, the DC path from the supply to ground is a **series chain of two MOSFETs**:\n\n```\nVDD ── R_D ── Vout ── D(M2)──S(M2) = X ── D(M1)──S(M1) ── GND\n                │\n                │  both gates tied together to Vin\n                └──────────────────────────────────┘\n```\n\n* $M_1$ sits at the bottom, its source at ground (so $M_1$ is the natural *pull‑down* device, i.e. NMOS).\n* $M_2$ sits on top between the output node and $M_1$; its drain is $V_{out}$, its source is the internal node $X$.\n* **Both gates are wired to the same node, $V_{in}$** (the single junction dot on the left connects $V_{in}$, the gate of $M_1$, and the gate of $M_2$).\n* $V_{DD}$ is connected only through the pull‑up resistor $R_D$.\n\nSo the only route by which $V_{out}$ can ever be pulled low is through **both** $M_1$ and $M_2$ conducting simultaneously.\n\n## DC analysis – why the output cannot go low\n\nFor $V_{out}$ to be low, current must flow through $R_D$, $M_2$ and $M_1$. Examine the two input extremes.\n\n**$V_{in}$ low.** $V_{GS1}=V_{in}<V_{th1}\\Rightarrow M_1$ off. No DC path to ground, so $I=0$ and $R_D$ holds $V_{out}=V_{DD}$. ✓ (correct \"high\")\n\n**$V_{in}$ high ($=V_{DD}$) – the case that should pull the output low.**\n$M_1$ is on and, being the bottom device with its gate at $V_{DD}$, it pulls its drain (node $X$) up to\n\n$$V_X \\approx V_{in}-V_{th1}$$\n\nwhenever the current through it is small. The gate‑source voltage of the top device is then\n\n$$V_{GS2}=V_{in}-V_X \\approx V_{in}-(V_{in}-V_{th1}) = V_{th1}$$\n\ni.e. $M_2$ is held **right at its threshold – it is off**. With $M_2$ off the pull‑down chain is broken, $I\\approx 0$, and $R_D$ again holds $V_{out}\\approx V_{DD}$.\n\nEven if we force $M_1$ into the triode region so that $V_X<V_{in}-V_{th1}$ and $M_2$ turns on, the current is limited: $M_1$'s gate is clamped at $V_{in}$, so the maximum current it can pass is bounded ($I_{max}=k[V_{th1}V_X-V_X^2/2]$ peaking at the saturation edge). Hence the droop $I\\,R_D$ is small, and in the limit $V_{out}$ is held within a couple of $V_{th}$ of $V_{DD}$ (the classic \"two‑diode‑in‑series\" threshold limitation). **The low level never reaches ground.**\n\n> **Robustness of this conclusion:** the failure is topological, not device‑type. $V_{out}$ is connected to ground *only* through $M_2$ in series with $M_1$. For $M_{out}$ to fall, $M_2$ must conduct, but $M_2$'s gate is the *same* signal that drives $M_1$, so the very act of $M_1$ turning on raises $M_2$'s source and shuts $M_2$ off. The same argument (a PMOS load whose source is at $X$ instead of $V_{DD}$ also cannot sink the output) gives $V_{out}\\approx V_{DD}$ for all $V_{in}$ in every reasonable device‑type assignment.\n\n**Conclusion (DC):** the circuit does **not** work as an inverter / level‑restoring stage. $V_{out}$ is essentially stuck at $V_{DD}$ with at most a small, $V_{th}$‑limited droop; the output swing is on the order of only $1$–$2\\,V_{th}$.\n\n## Small‑signal view (why $M_2$ adds nothing)\n\nTaking both devices in saturation and gates at $v_{in}$, the small‑signal currents are\n\n$$i_{d1}=g_{m1}\\,v_{in}+\\tfrac{x}{r_{o1}},\\qquad i_{d2}=g_{m2}(v_{in}-x)+\\tfrac{v_{out}-x}{r_{o2}}$$\n\nwith $i_{d1}=i_{d2}$ (series branch). For matched devices and large $r_o$, this forces $x\\approx 0$: **the internal node $X$ becomes an AC ground.** Consequently\n\n* $M_2$'s gate‑source signal is $v_{in}-x\\approx v_{in}$, so it \"follows\" $M_1$ and contributes no extra transconductance;\n* the voltage gain is just that of a single common‑source stage,\n  $$A_v = \\frac{v_{out}}{v_{in}}\\approx -g_m R_D$$\n* looking into $V_{out}$, the series stack still presents a high resistance ($\\approx g_m r_{o1}r_{o2}$), but this is in **parallel** with $R_D$, so the overall output resistance is still $\\approx R_D$.\n\nIn other words $M_2$ provides **no cascoding benefit** – it neither raises the gain nor the effective output resistance at $V_{out}$, while at DC it costs a threshold drop.\n\n## Diagnosis and fix\n\nThe schematic is a **mis‑wired cascode inverter**. A cascode inverter uses $M_1$ as the common‑source input device and $M_2$ as a common‑gate device whose gate is held at a **fixed bias** $V_{BIAS}$, *not* at $V_{in}$. Tying $M_2$'s gate to the input cancels the AC at node $X$ (no cascode) and clamps $M_2$ at threshold at DC (no pull‑down).\n\nCorrect alternatives:\n\n1. **Cascode inverter:** connect $M_2$'s gate to a bias $V_{BIAS}\\approx V_{th}+V_{headroom}$ (with $M_2$ sized so the stack still reaches the low rail in triode).\n2. **Standard CMOS inverter:** replace the $M_2$+chain with a single PMOS whose *source* is tied to $V_{DD}$ and gate to $V_{in}$, in parallel with $M_1$ – the only topology that gives full $0\\to V_{DD}$ swing.\n\n**Bottom line:** as drawn, with both gates at $V_{in}$, the series pull‑down path can never carry the current needed to discharge $V_{out}$, so $V_{out}\\approx V_{DD}$ for all $V_{in}$; the stage has no useful inversion or voltage gain beyond a single common‑source device and a severely degraded output swing.",
        "format": "markdown",
        "sha256": "9b3e4f6b70b746cfa9fccb3fc8fbf258d1a8e15fd85a542a1e7cd48c7e1459f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misses the essential longer-effective-channel behavior and instead incorrectly claims the stack cannot pull down, treating it as a cascode and invoking a cascode-like output resistance. The shared-gate series topology is recognized, but the central operating mechanism and conclusion are wrong.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1173,
        "output_tokens": 18751,
        "total_tokens": 19924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1173,
        "output_tokens": 18751,
        "total_tokens": 19924,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17078,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology and device identification\n\nBoth transistors are NMOS (source arrow points out). Tracing the connections:\n\n* **Gates:** $V_{in}$ is tied to **both** gates, $V_{G1}=V_{G2}=V_{in}$.\n* **M₁:** source → ground, drain → node $X$ (the node between the two FETs).\n* **M₂:** source → node $X$, drain → $V_{out}$.\n* **$V_{out}$** is pulled up to $V_{DD}$ through $R_D$.\n\nSo $R_D$, $M_2$ and $M_1$ form a **single series current path** from $V_{DD}$ to ground:\n\n$$V_{DD}\\to R_D \\to V_{out}\\to M_2\\to X\\to M_1\\to \\text{gnd}$$\n\nHence the **same DC current $I_D$** flows through all three elements. Let $k_n=\\mu_nC_{ox}(W/L)$ (matched, square‑law, body effect neglected) and $a=V_{in}-V_t$.\n\n## 2. DC operating point (region analysis)\n\nBecause the transistors are in series they cannot both be in saturation. If $M_1$ were in saturation then $V_X\\ge a$, which gives $V_{GS2}=V_{in}-V_X\\le V_t$, i.e. $M_2$ would be **off** and $I_D=0$ – a contradiction. Therefore, for $V_{in}>V_t$:\n\n* **$M_1$ is in triode**, **$M_2$ is in saturation.**\n\nEquating the two currents:\n\n$$I_D = k_n\\!\\left[aV_X-\\tfrac{V_X^2}{2}\\right] = \\tfrac{k_n}{2}(a-V_X)^2$$\n\n$$\\Rightarrow\\; 2V_X^2-4aV_X+a^2=0 \\;\\Rightarrow\\; V_X=\\left(1-\\tfrac{1}{\\sqrt2}\\right)a\\approx0.293\\,a$$\n\nso\n\n$$\\boxed{V_X\\approx0.293\\,(V_{in}-V_t),\\quad V_{OV2}=a-V_X=\\frac{a}{\\sqrt2}}$$\n\n$$\\boxed{I_D=\\frac{k_n}{4}(V_{in}-V_t)^2}$$\n\n$$\\boxed{V_{out}=V_{DD}-I_D R_D = V_{DD}-\\frac{k_n R_D}{4}(V_{in}-V_t)^2}$$\n\n**Validity conditions:** $V_{in}>V_t$ and $M_2$ stays in saturation, i.e. $V_{out}-V_X\\ge V_{OV2}\\Rightarrow V_{out}\\ge V_{in}-V_t$. For $V_{in}<V_t$ both FETs are off and $V_{out}=V_{DD}$.\n\n## 3. Small‑signal analysis\n\nLet $v_x$ and $v_{out}$ be the small‑signal voltages at $X$ and at the output ($v_g=v_{in}$). Linearising about the DC point above (and ignoring $r_o$ first):\n\n* $M_2$ (sat): $i_{d2}=g_{m2}(v_{in}-v_x)$, with $g_{m2}=k_n(a-V_X)$.\n* $M_1$ (triode): looks at node $X$ like $g_{ds1}=k_n(a-V_X)$ in parallel with a $v_{in}$‑controlled source $g_{m1t}=k_n V_X$.\n\nKCL at $X$ and at $V_{out}$ ($v_{out}/R_D+i_{d2}=0$) gives, after substitution, the clean result\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=-\\frac{k_n R_D}{2}\\,(V_{in}-V_t)}$$\n\nEquivalently $|A_v|=R_D\\sqrt{k_n I_D}$. The factor ½ appears because $M_1$'s gate is driven by the *same* $v_{in}$, so part of the input appears at the source of $M_2$ (feed‑forward) and reduces the effective $v_{gs2}$; the amplifier is **inverting**.\n\nIncluding $r_{o2}$ (with $\\beta=V_X/(a-V_X)=\\sqrt2-1$):\n\n$$A_v=-\\frac{g_{m2}(1+\\beta)+\\beta/r_{o2}}{\\,2/R_D+1/r_{o2}+1/(g_{m2}r_{o2}R_D)\\,}\\;\\xrightarrow{r_{o2}\\to\\infty}\\;-\\frac{k_n R_D}{2}(V_{in}-V_t)$$\n\n**Input resistance:** $R_{in}\\to\\infty$ (only the gates are seen; neglecting capacitances and bulk resistance).\n\n**Output resistance:** with $v_{in}=0$, $M_1$ reduces to a resistor $1/g_{m2}$ at the source of $M_2$, so the resistance looking into $M_2$'s drain is $r_{o2}+1/g_{m2}+g_{m2}r_{o2}/g_{m2}=2r_{o2}+1/g_{m2}$. Hence\n\n$$\\boxed{R_{out}=R_D\\parallel\\left(2r_{o2}+\\frac{1}{g_{m2}}\\right)\\approx R_D}$$\n\n## 4. Summary / function of the circuit\n\nThe circuit is an **inverting voltage amplifier** in which $M_2$ (operating in saturation) is the active device and $R_D$ the load, while $M_1$ (operating in triode) sits at the source of $M_2$. Because both gates receive $v_{in}$, $M_1$ does not act as a fixed current source; instead it sets the bias current ($I_D=k_n V_{OV}^2/4$) and provides a signal‑dependent degeneration that fixes the gain at $|A_v|=(k_n R_D/2)(V_{in}-V_t)$. The input resistance is infinite and the output resistance is essentially $R_D$. (Body effect, neglected here, would slightly modify the small‑signal result because $V_X>0$ raises the source of $M_2$ above the bulk.)",
        "format": "markdown",
        "sha256": "9e8ac5e830c32316f4288b3172f6cde3ec5b62d4c03def06bddee290727cb380"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate series NMOS topology and the triode M1/saturated M2 operating regions, with a largely consistent bias analysis. But it misses the central conclusion that the pair behaves approximately like a single NMOS with effective channel length L1 + L2, instead focusing on amplifier gain and signal-dependent degeneration.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1173,
        "output_tokens": 18514,
        "total_tokens": 19687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1173,
        "output_tokens": 18514,
        "total_tokens": 19687,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17044,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit description\n\nThe schematic is a two‑transistor stack with a resistive load:\n\n* $V_{DD}\\to R_D\\to$ node $V_{out}$.\n* $V_{out}$ connects to one terminal of $M_2$; the other terminal of $M_2$ connects to the drain of $M_1$ (call this internal node $V_1$).\n* $M_1$'s source is grounded.\n* **Both gates** of $M_1$ and $M_2$ are tied together to $V_{in}$.\n\nSo $M_1$ and $M_2$ are in *series* between ground and $R_D$, and a single signal drives both gates. Taking $M_1$ as an NMOS (source at ground) and $M_2$ as the complementary device, this is a **common‑source stage in which $M_1$ is the input transistor and $M_2$ is a series \"pass\" transistor whose gate is also driven by the input.** The unusual feature is that $M_2$ is not a bias current source or a diode‑connected load; it carries the same signal current as $M_1$.\n\n## DC operating point\n\nBecause the two transistors are in series, one bias current $I$ flows from $V_{DD}$ through $R_D$, $M_2$, $M_1$ to ground:\n\n$$I = \\frac{V_{DD}-V_{out}}{R_D}$$\n\nwith $V_{out}=V_{DD}-I R_D$. The internal node $V_1$ is set by the two $V_{GS}$–$I_D$ relations. For $M_1$ (NMOS, $V_{GS1}=V_{in}-0$):\n\n$$I = \\tfrac{1}{2}k_1\\,(V_{in}-V_{th1})^2 \\quad(\\text{saturation})$$\n\nFor $M_2$, $I$ must also equal its own $I_D(V_{GS2})$, which fixes $V_1$. The DC value of $V_{in}$ is therefore the free bias variable; choosing it places both devices in their intended region (this requires $V_1$ to lie in the overlap of the two saturation conditions, which is why the two devices are normally taken as a complementary NMOS/PMOS pair – it makes the DC bias feasible).\n\n## Small‑signal analysis\n\nLet $v_{in},\\,v_1,\\,v_{out}$ be the AC components. The crucial observation is that **$M_1$ and $M_2$ carry the same branch current**, and the only element that *generates* signal current is $M_1$, because $v_{gs1}=v_{in}-0=v_{in}$. $M_2$'s transconductance does not create an independent current; it only forces the internal node voltage $v_1$. Hence the AC current in the series stack is essentially\n\n$$i \\;\\approx\\; g_{m1}\\,v_{in} \\quad(+\\,g_{ds1}\\,v_1)$$\n\nThis same current flows through $R_D$ (the only other connection at the output node), so\n\n$$\\frac{0-v_{out}}{R_D} \\approx g_{m1}\\,v_{in}$$\n\n$$\\boxed{A_v = \\frac{v_{out}}{v_{in}} \\approx -\\,g_{m1}\\,R_D}$$\n\ni.e. the gain is that of an ordinary common‑source amplifier loaded by $R_D$; $M_2$ does **not** change the transconductance that appears at the output. Including channel‑length modulation, $r_{o1}$ and $r_{o2}$ introduce small corrections (the $g_{ds1}v_1$ term and the finite resistance of $M_2$), but for $g_{m1}R_D\\gg1$ the expression above holds.\n\n## Output resistance\n\nThe output resistance is $R_{out}=R_D \\parallel R_{M2}$, where $R_{M2}$ is the resistance looking into $M_2$'s top terminal with $v_{in}=0$ (so $M_2$'s gate is at AC ground and $M_1$ looks like $r_{o1}$ to ground from node $V_1$):\n\n* If the top terminal is $M_2$'s **drain** (NMOS reading), $M_2$ behaves as a common‑gate element and $R_{M2}\\approx r_{o2}(1+g_{m2}r_{o1})+r_{o1}\\approx g_{m2}r_{o1}r_{o2}$ (very large), so $R_{out}\\approx R_D$ – the normal CS result, and the stage also enjoys a high‑gain, cascode‑like output impedance.\n* If the top terminal is $M_2$'s **source** (PMOS reading), looking into the source gives $R_{M2}\\approx \\dfrac{r_{o1}+r_{o2}}{1+g_{m2}r_{o2}}\\approx \\tfrac{1}{g_{m2}}$ (small), so $R_{out}\\approx R_D\\parallel \\tfrac{1}{g_{m2}}$.\n\nIn both cases the voltage gain remains $\\approx -g_{m1}R_D$ (open‑circuit), because the output current is fixed by $M_1$'s $g_m v_{in}$ and drops across $R_D$.\n\n## Summary\n\nThe circuit is a **common‑source voltage amplifier** in which $M_1$ is the input (CS) device and $M_2$ is a series transistor whose gate is also driven by $V_{in}$. The series connection means $M_2$ sets the internal node $V_1$ and the DC bias/output swing but does not alter the signal transconductance delivered to the load. Consequently:\n\n* Voltage gain $\\;\\displaystyle A_v \\approx -g_{m1}R_D$ (refined by $r_{o1},r_{o2}$).\n* $V_{out}$ is inverted relative to $V_{in}$ and is taken at the top of the stack.\n* $R_{out}\\approx R_D$ (high‑impedance reading) or $R_D\\parallel(1/g_{m2})$ (low‑impedance reading), depending on which terminal of $M_2$ faces $V_{out}$.\n\nThus $M_2$'s purpose is biasing/level‑setting and output‑swing management, while the amplification itself is provided by $M_1$ against $R_D$.",
        "format": "markdown",
        "sha256": "0b73a43ab8a26c35026fdff275d8958f75d13caee01b0db253248fc32149803d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misses the essential result: both devices are NMOS with common gate drive and behave approximately like one transistor with the sum of their channel lengths. It instead treats M2 as complementary and analyzes a cascode-like stage, with M1 saturated, contrary to the circuit's triode-region lower device.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1173,
        "output_tokens": 25258,
        "total_tokens": 26431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1173,
        "output_tokens": 25258,
        "total_tokens": 26431,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23755,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the topology\n\nAll three switches are NMOS (body‑arrow on the source lead). Tracing the nodes:\n\n| Node | Connected to |\n|------|-------------|\n| $V_{in}$ | gate of $M_1$ |\n| $V_{DD}$ | drain of $M_1$, top of $R_D$ |\n| $V_{out}$ | drain of $M_2$, bottom of $R_D$ (output) |\n| $V_b$ | gate of $M_2$ (DC bias) |\n| $X$ (tail node) | **source of $M_1$**, **source of $M_2$**, top of $I_1$ |\n| gnd | bottom of $I_1$ |\n\nBecause the source‑arrow of $M_1$ is at the node tied to $I_1$, the *source* of $M_1$ is at $X$ and its *drain* is at $V_{DD}$ → **$M_1$ is a common‑drain (source‑follower)** stage. For $M_2$ the source is also at $X$, the gate is the AC‑ground bias $V_b$, and the drain is $V_{out}$ → **$M_2$ is a common‑gate** stage. $I_1$ is the bias/tail current, and $R_D$ is the drain load of $M_2$.\n\nSo the signal path is $V_{in}\\to(\\text{follower }M_1)\\to v_x\\to(\\text{common‑gate }M_2)\\to V_{out}$. (Note: this is *not* a cascode – in a cascode the input device's *drain* would sit at $X$; here its *source* does.)\n\n## 2. DC operating point\n\nLet $i_{D1},i_{D2}$ be the drain currents. KCL at the tail node (ideal current source):\n\n$$i_{D1}+i_{D2}=I_1$$\n\nwith\n$$V_{GS1}=V_{in}-V_X,\\qquad V_{DS1}=V_{DD}-V_X$$\n$$V_{GS2}=V_b-V_X,\\qquad V_{DS2}=V_{out}-V_X,\\qquad V_{out}=V_{DD}-i_{D2}R_D$$\n\nThe two square‑law (or exponential) equations plus the KCL determine $V_X$ and $i_{D2}$, hence $V_{out}$. Saturation requires\n$$V_{in}>V_X+V_{t1},\\quad V_{DD}>V_{in}\\ (M_1),\\qquad V_{out}>V_b\\ (M_2)\\;\\Rightarrow\\; i_{D2}R_D<V_{DD}-V_b .$$\nNotice $I_1$ only sets the bias; it does **not** appear in the small‑signal gain (it acts as an AC open at $X$).\n\n## 3. Small‑signal model and gain\n\nTake $V_b$ as AC ground. Let $g_{m1},g_{m2},r_{o1},r_{o2}$ be the small‑signal parameters and define $R_{o1}=(1/g_{m1})\\parallel r_{o1}$, $R_{in2}=(1/g_{m2})\\parallel r_{o2}$.\n\n* **Stage 1 (follower, gate→source):** $v_x$ is $v_{in}$ divided by the load formed by the follower output resistance and the common‑gate input resistance:\n$$\\frac{v_x}{v_{in}}=\\frac{R_{in2}}{R_{o1}+R_{in2}}$$\n* **Stage 2 (common‑gate, source→drain):**\n$$\\frac{v_{out}}{v_x}=(g_{m2}+\\tfrac{1}{r_{o2}})\\,(R_D\\parallel r_{o2})$$\n\n**Overall voltage gain**\n$$A_v=\\frac{v_{out}}{v_{in}}=\\frac{R_{in2}}{R_{o1}+R_{in2}}\\;(g_{m2}+\\tfrac{1}{r_{o2}})(R_D\\parallel r_{o2})$$\n\nNeglecting $r_{o1},r_{o2}$ this collapses to the clean result\n\n$$\\boxed{A_v \\simeq \\frac{g_{m1}}{g_{m1}+g_{m2}}\\;g_{m2}R_D}$$\n\nwhich is **non‑inverting**. Limits: if $g_{m1}\\gg g_{m2}$, $A_v\\approx g_{m2}R_D$ (the follower is a stiff buffer); if $g_{m2}\\gg g_{m1}$, $A_v\\approx g_{m1}R_D$.\n\nAn exact node‑equation solution (KCL at $X$ and at $V_{out}$, $I_1$ = open) gives the same expression with\n$K=\\dfrac{R_D(1+g_{m2}r_{o2})}{R_D+r_{o2}}$, i.e. $A_v=\\dfrac{K\\,g_{m1}}{g_{m1}+1/r_{o1}+K/R_D}$.\n\n## 4. Input and output impedance\n\n* **Input impedance:** looking into the gate of $M_1$ → $Z_{in}=\\infty$ (MOS gate).\n* **Output impedance:** $R_D$ in parallel with the common‑gate output resistance. With $v_{in}=0$, the resistance seen at $X$ from $M_1$ is $R_s=(1/g_{m1})\\parallel r_{o1}$, so the resistance looking into $M_2$'s drain is $r_{o2}+R_s(1+g_{m2}r_{o2})$. Hence\n$$Z_{out}=R_D\\parallel\\big[r_{o2}+R_s(1+g_{m2}r_{o2})\\big]\\;\\approx\\;R_D$$\n(the bracketed term is large), so the output is set by the resistive load $R_D$.\n\n## 5. Summary\n\nThe circuit is a **high‑input‑impedance, non‑inverting two‑stage amplifier**: a MOS source‑follower ($M_1$) that buffers $V_{in}$ to the tail node $X$, feeding a common‑gate stage ($M_2$) whose drain is loaded by $R_D$. The current source $I_1$ biases both transistors (their currents sum to $I_1$) and presents an open circuit to AC, decoupling the stages at $X$. Midband gain is $\\approx \\frac{g_{m1}}{g_{m1}+g_{m2}}g_{m2}R_D$, input impedance is essentially infinite, and output impedance is $\\approx R_D$. The bias $V_b$ must be chosen so that $M_2$ stays in saturation ($V_{out}>V_b$) and $M_1$ remains on.",
        "format": "markdown",
        "sha256": "fcaac7fbe54f0c75173430b250966fd204bca27d236163f9d847d213b5d3baa4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower driving M2 in common-gate configuration, with M2’s gate biased at Vb and output at its drain. The stated gain is non-inverting and matches the expected result.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1876,
        "output_tokens": 16348,
        "total_tokens": 18224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1876,
        "output_tokens": 16348,
        "total_tokens": 18224,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14737,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nLabel the internal node (the junction of the two transistor \"bottom\" terminals and the top of $I_1$) as **S**. Reading the schematic literally, the connections are:\n\n| Element | Terminal 1 | Terminal 2 | Gate |\n|---|---|---|---|\n| $M_1$ | $V_{DD}$ | $S$ | $V_{in}$ |\n| $M_2$ | $V_{out}$ | $S$ | $V_b$ |\n| $R_D$ | $V_{DD}$ | $V_{out}$ | – |\n| $I_1$ | $S$ | gnd | – |\n\nSo $M_1$ and $M_2$ share node $S$; $M_1$ goes from $S$ to $V_{DD}$, $M_2$ from $S$ to $V_{out}$, $R_D$ loads $V_{out}$, and $I_1$ is the bias current source tied to $S$. $V_b$ is a fixed DC bias (AC ground); $V_{in}$ is the signal input (its DC offset is set externally to establish the operating point); $V_{out}$ is the output. Taking the source arrow of each device at the bottom terminal (node $S$), both are **nMOS**.\n\n**Function of each stage**\n\n* $M_1$: drain at AC‑ground ($V_{DD}$), gate = input, source = $S$ → **common‑drain (source follower)**.\n* $M_2$: gate at AC‑ground ($V_b$), source = $S$, drain = $V_{out}$ → **common‑gate** stage.\n* $R_D$: drain load of $M_2$. $I_1$: bias sink at the common source node (open for AC).\n\nThus the circuit is a **source follower ($M_1$) driving a common‑gate amplifier ($M_2$)**, i.e. a non‑inverting two‑transistor amplifier with a resistive load. (The follower's \"load\" is the input resistance of the common‑gate stage, $\\approx 1/g_{m2}$; $I_1$ is an AC open and does not load node $S$.)\n\n## DC biasing\n\nAt node $S$, $KCL$ (both nMOS currents enter $S$, $I_1$ leaves it):\n\n$$I_{D1} + I_{D2} = I_1,\\qquad V_{out} = V_{DD} - I_{D2}R_D$$\n\nwith $I_{D1}$ set by $V_{GS1}=V_{in}-V_S$ and $I_{D2}$ by $V_{GS2}=V_b-V_S$. Saturation requires $V_{DD}>V_{GS1}$, $V_{out}>V_b$, and $V_b-V_S>V_{th}$. The DC level of $V_{in}$ together with $V_b$ is chosen so that the two drain currents sum to $I_1$.\n\n## Small‑signal analysis\n\nSet $v_{DD}=v_b=0$ and $I_1\\to$ open. Let $v_s$ be the small‑signal voltage at $S$.\n\n* $M_1$ (follower): $i_{d1}=g_{m1}(v_{in}-v_s)+v_s\\,g_{ds1}$ (drain at AC gnd).\n* $M_2$ (common‑gate): $i_{d2}=g_{m2}(0-v_s)+(v_{out}-v_s)g_{ds2}$.\n* Node $S$: $i_{d1}+i_{d2}=0$.\n* Node $V_{out}$: $v_{out}/R_D + i_{d2}=0 \\;\\Rightarrow\\; v_{out}=-i_{d2}R_D$.\n\n**Voltage gain (ideal, $r_o\\!\\to\\!\\infty$):** solving the two node equations gives the follower gain $v_s/v_{in}=g_{m1}/(g_{m1}+g_{m2})$ and the common‑gate gain $v_{out}/v_s=+g_{m2}R_D$, hence\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}} \\approx R_D\\,\\frac{g_{m1}\\,g_{m2}}{g_{m1}+g_{m2}} = \\frac{R_D}{1/g_{m1}+1/g_{m2}}}$$\n\nThe gain is **non‑inverting** and, for equal transconductances, $A_v\\approx \\tfrac{1}{2}g_m R_D$.\n\n**Input resistance:** $R_{in}=\\infty$ (MOS gate).\n\n**Output resistance:** looking into $V_{out}$ with $v_{in}=0$, the common‑gate stage presents a high resistance at its drain, so $R_{out}\\approx R_D$ (with finite $r_o$, $R_{out}=R_D\\parallel R_{o,CG}$ where $R_{o,CG}\\approx r_{o2}(1+g_{m2}R_s)+R_s$ and $R_s\\approx 1/g_{m1}$). Including $r_{o1},r_{o2}$ in the gain equation slightly reduces $|A_v|$ and makes $R_{out}$ finite.\n\n## Bandwidth / frequency response\n\nTwo poles dominate: (i) the output pole at $R_D$ loading the drain capacitance of $M_2$, and (ii) a higher‑frequency pole at node $S$, which is a **high‑impedance internal node** (it sees only the follower output resistance $\\approx 1/g_{m1}$ in parallel with the common‑gate input resistance $\\approx 1/g_{m2}$, times the capacitance $C_{gs2}+C_{db1}$). The $C_{gs2}$ at $S$ is not degenerated in the usual way, so the second pole is the main bandwidth limit; $C_{gb2}$ also feeds the Miller‑type charge at $S$.\n\n## Note on the alternate (conventional cascode) reading\n\nIf the *upper* terminal of $M_1$ is its source (i.e. $M_1$ is a pMOS with source at $V_{DD}$), then $M_1$ is a common‑source stage and $M_2$ a common‑gate stage — the standard **cascode** topology (the small‑signal node $S$ is then exactly the cascode node, $I_1$ being an AC open). In that case the gain becomes the familiar\n\n$$A_v \\approx -g_{m1}\\big(R_D \\parallel R_{out,cascode}\\big)\\approx -g_{m1}R_D,\\qquad R_{out}\\approx R_D\\parallel g_{m2}r_{o2}r_{o1},$$\n\ni.e. inverting with much larger output resistance. The two interpretations differ only in which terminal of $M_1$ is the source; the node equations above apply unchanged once that is fixed.",
        "format": "markdown",
        "sha256": "a7b88d2e2d71f5260d747e253cbdd6bc76eee3b10e05332a7c367ecf8093d3c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower driving M2 as a common-gate stage and gives the expected non-inverting gain. The conditional cascode discussion does not change its identification of the shown circuit.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1876,
        "output_tokens": 33289,
        "total_tokens": 35165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1876,
        "output_tokens": 33289,
        "total_tokens": 35165,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 31695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology identification\n\nReading the schematic node by node:\n\n* **M1 and M2 are both NMOS** (source arrow on the lower terminal of each device).\n* Their **sources are tied together** at a node I will call **X**, and X is pulled to ground by the bias current source **I₁**. This is the *tail* current.\n* **M1 drain → V_DD** (the left vertical wire goes straight to the supply rail), **M1 gate → V_in** (the signal input).\n* **M2 drain → V_out**, **M2 gate → V_b** (a fixed DC bias), and **V_out** is loaded by **R_D** to V_DD.\n\nSo the two transistors share a source node (like a differential‑pair tail), but the loads are asymmetric: M1's drain is hard‑wired to the supply, M2's drain goes to the resistive load. In AC terms this is exactly a **source‑follower (M1) driving a common‑gate stage (M2)**:\n\n* M1: drain at AC‑ground (V_DD), gate = input, source = X → *common‑drain / source follower*.\n* M2: gate at AC‑ground (V_b), source = X, drain = V_out → *common‑gate*.\n\nThe current source I₁ only sets the DC bias at X; it is an open circuit for AC. The stage is a **non‑inverting (current‑steering) amplifier**: raising V_in raises I_M1, which steals current from M2, lowers the current through R_D, and therefore **raises V_out**.\n\n## 2. DC operating point\n\nAssume both devices in saturation. Let V_X be the DC voltage at the tail node.\n\n$$I_{M1}=\\tfrac{k_1}{2}(V_{in}-V_X-V_{th})^2,\\qquad I_{M2}=\\tfrac{k_2}{2}(V_b-V_X-V_{th})^2$$\n\nKCL at X (currents from both drains flow into X and out through the tail):\n\n$$I_{M1}+I_{M2}=I_1 \\quad\\Rightarrow\\quad \\text{solves for } V_X$$\n\nThen the output and the split are\n\n$$I_{M2}=I_1-I_{M1},\\qquad V_{out}=V_{DD}-I_{M2}R_D$$\n\nSaturation conditions to check:\n\n* M1: $V_{DD}-V_X \\ge V_{in}-V_X-V_{th}\\ \\Rightarrow\\ V_{DD}\\ge V_{in}-V_{th}$ (usually true).\n* M2: $V_{out}-V_X \\ge V_b-V_X-V_{th}\\ \\Rightarrow\\ V_{DD}-I_{M2}R_D \\ge V_b-V_{th}$ (sets the maximum useful $I_{M2}$, i.e. the output swing headroom).\n\n$V_b$ is chosen so that the desired quiescent split $I_{M2}(0)$ is obtained; $V_{in}$ then steers current between the two devices.\n\n## 3. Small‑signal analysis\n\nDefine $g_{m1},g_{m2},r_{o1},r_{o2}$. Set $v_b=0$ (AC ground), $v_{DD}=0$.\n\n**Stage 1 – M1 source follower.** The only AC path from node X to ground (other than M1's own source) is the input resistance of the common‑gate M2, which is $1/g_{m2}$ (the tail is open). Hence\n\n$$\\frac{v_x}{v_{in}}=\\frac{1/g_{m2}}{1/g_{m2}+1/g_{m1}}=\\frac{g_{m1}}{g_{m1}+g_{m2}}$$\n\n**Stage 2 – M2 common‑gate.** With gate at AC ground, $i_{d2}=g_{m2}(0-v_x)=-g_{m2}v_x$, and $v_{out}=-i_{d2}R_D$, so\n\n$$\\frac{v_{out}}{v_x}=g_{m2}R_D$$\n\n**Voltage gain** (r_o ignored):\n\n$$\\boxed{A_v=\\frac{v_{out}}{v_{in}}=\\frac{g_{m1}\\,g_{m2}}{g_{m1}+g_{m2}}\\,R_D=\\frac{R_D}{1/g_{m1}+1/g_{m2}}\\quad(\\text{positive, non‑inverting})}$$\n\ne.g. if $g_{m1}=g_{m2}=g_m$, $A_v=\\tfrac{1}{2}g_mR_D$. Including $r_o$ slightly reduces the gain and, more importantly, raises the output resistance (the M1 source node presents $R_s\\approx1/g_{m1}$ to M2's source, boosting M2's intrinsic $r_{o2}$).\n\n**Input resistance:** $R_{in}=\\infty$ (MOS gate).\n\n**Output resistance:** look into V_out. The source resistance seen by M2's drain is $R_s\\approx1/g_{m1}$ (looking back into M1's source with $v_{in}=0$; tail is open), so\n\n$$R_{out}\\approx R_D\\;\\Big\\|\\;\\Big[r_{o2}+R_s(1+g_{m2}r_{o2})\\Big]\\approx R_D\\;\\Big\\|\\;r_{o2}\\!\\left(1+\\frac{g_{m2}}{g_{m1}}\\right)$$\n\ni.e. the common‑gate action gives a modest impedance boost over a plain R_D‑loaded CS stage, but it is **not** a true cascode (the boost factor is $g_{m2}/g_{m1}$, not $g_m r_o$), because M1's drain is tied to the supply rather than to M2's source.\n\n## 4. Remarks / summary\n\n* **Function:** single‑ended, non‑inverting voltage amplifier / current‑steering stage; $I_1$ sets the bias, $V_b$ sets the quiescent split, $V_{in}$ modulates the split, $R_D$ converts it to $V_{out}$.\n* **Strengths:** very high input impedance; the tail node X sits at a low AC resistance ($\\approx1/g_{m2}$), so it does not create a dominant pole.\n* **Limitations:** the gain is bounded by $R_D/(1/g_{m1}+1/g_{m2})$, smaller than a CS gain $g_mR_D$; the output swing is limited by the M2 saturation condition $V_{out}\\ge V_b-V_{th}$; the output resistance improvement is only moderate.\n* **Dominant pole** is at $V_{out}$: $f_p\\approx1/(2\\pi R_{out}C_L)$; the X node is a low‑impedance, non‑dominant node.\n\nIn short, the circuit is a tail‑biased **source‑follower‑to‑common‑gate** stage giving a positive gain $A_v=R_D/(1/g_{m1}+1/g_{m2})$, high $R_{in}$, and an output resistance $R_D\\|r_{o2}(1+g_{m2}/g_{m1})$.",
        "format": "markdown",
        "sha256": "acf83e436631e6bda6e2a064863558bd29ac3bbabe5724c54d3a62016ff2ddc9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower driving M2 in common-gate configuration, and gives the correct non-inverting gain (including the matched-device case).",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1876,
        "output_tokens": 14833,
        "total_tokens": 16709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1876,
        "output_tokens": 14833,
        "total_tokens": 16709,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13173,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Setting up the small‑signal problem\n\nTo find $Z_{out}$ we drive the output with a test source $v_x$ and set all independent sources to AC ground: $V_{DD}\\to 0$, $V_{in}\\to 0$, $V_b\\to 0$. With these conditions:\n\n* **M2** has its gate *and* its source at AC ground, so $v_{gs2}=0$ and the $g_{m2}v_{gs2}$ source is off. M2 therefore behaves simply as a shunt resistance $r_{o2}$ (plus its drain capacitance $C_{db2}$) from $V_{out}$ to ground. It supplies the bias current but **does not** generate any inductance.\n* **M1** has its **drain at AC ground** ($V_{DD}$), its **source at the output** $v_x$, and its **gate tied to ground through $R_S$**. This is the part that can look inductive.\n\nSo the inductive effect comes entirely from the M1 gate network: the finite gate resistance $R_S$ together with the gate–source capacitance $C_{gs}$ and the transconductance $g_{m1}$.\n\n## Small‑signal derivation\n\nLet $v_g$ be the gate voltage of M1. KCL at the gate (drain at 0 V, source at $v_x$, no gate terminal current):\n\n$$\\frac{v_g}{R_S} + sC_{gd}\\,v_g + sC_{gs}(v_g - v_x)=0 \\;\\;\\Rightarrow\\;\\; v_g = \\frac{sC_{gs}R_S\\,v_x}{1+sR_S(C_{gs}+C_{gd})}$$\n\nAt low/mid frequencies $v_g \\approx sC_{gs}R_S\\,v_x$: a **small voltage 90° out of phase** with $v_x$. This is the key — the output voltage \"leaks\" onto the gate through $C_{gs}$, and because the gate is high‑impedance that displacement current must flow through $R_S$, producing a quadrature gate voltage.\n\nHence $v_{gs1}=v_g-v_x \\approx -v_x + sC_{gs}R_S\\,v_x$.\n\nThe current the output node must push into M1's source terminal is then\n\n$$i_1 = \\underbrace{\\frac{v_x}{r_{o1}} + g_{m1}v_x}_{\\text{in‑phase (resistive)}} + s\\,v_x\\big(C_{gs}+C_{ds} - g_{m1}C_{gs}R_S\\big)$$\n\nThe current into M2 is $i_2 = v_x\\big(1/r_{o2} + sC_{db2}\\big)$. Summing,\n\n$$i_x = v_x\\Big[\\,G + s\\big(C - g_{m1}C_{gs}R_S\\big)\\Big],\\qquad G=g_{m1}+\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}},\\;\\; C=C_{gs}+C_{ds}+C_{db2}$$\n\nTherefore\n\n$$Z_{out}=\\frac{v_x}{i_x}=\\frac{1}{G+s(C-g_{m1}C_{gs}R_S)} \\;\\approx\\; \\frac{1}{G} + s\\,\\frac{g_{m1}C_{gs}R_S - C}{G^{2}}$$\n\nThe coefficient of $s=j\\omega$ is the equivalent inductance\n\n$$\\boxed{\\,L \\approx \\frac{g_{m1}C_{gs}R_S - C}{G^{2}}\\,}$$\n\nso the output impedance is **inductive whenever $g_{m1}C_{gs}R_S > C$**, i.e. when the \"generated\" inductive susceptance exceeds the total physical capacitance at the node. (Equivalently, looking only into M1, $Z \\approx \\tfrac{1}{g_{m1}} + s\\tfrac{R_S C_{gs}}{g_{m1}}$, a small series $R$–$L$, in parallel with the shunt $C$ and $r_{o2}$; the parallel combination is inductive over the band where the series $L$ dominates the shunt $C$.)\n\n## Physical interpretation\n\n* The source (output) voltage $v_x$ couples to the gate via $C_{gs}$.\n* That current cannot enter the gate, so it flows through $R_S$, creating $v_g$ that **lags/leads** $v_x$ by 90°.\n* This quadrature $v_g$ modulates $v_{gs1}$ and hence the $g_{m1}v_{gs1}$ current, injecting at the output a current component that is 90° out of phase in the *inductive* sense (a negative susceptance, $-j\\omega\\,g_{m1}R_SC_{gs}$).\n* Real capacitances ($C_{gs},C_{ds},C_{db2}$) always add a positive (capacitive) susceptance. The net port is inductive only if the $g_{m1}R_SC_{gs}$ term is larger. At high frequency the physical capacitors always win, so the inductive behaviour is confined to a finite band (roughly from DC up to the gate‑node zero/pole), after which $Z_{out}$ becomes capacitive again.\n\nTwo limiting checks confirm the result: if $R_S=0$ the gate is hard‑grounded, $v_g=0$, no quadrature voltage appears, and the impedance is purely resistive + capacitive; if $C_{gs}=0$ there is no feedback to the gate, and again no inductance. Thus **both a finite gate resistance $R_S$ and a finite $C_{gs}$ are required**, and their product with $g_{m1}$ is what makes the output impedance inductive.",
        "format": "markdown",
        "sha256": "88336338ab2b54b1affb54b03c04f8e0d13fe2e8240b2d655e9295bab32ff7f3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies the source-follower topology and derives how the RS–Cgs feedback through gm1 produces positive inductive reactance; its condition reduces to RS > 1/gm1 in the simplified model. It omits the key low-to-high impedance transition to RS and adds a high-frequency capacitive claim based on parasitics outside the golden model.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1377,
        "output_tokens": 11976,
        "total_tokens": 13353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1377,
        "output_tokens": 11976,
        "total_tokens": 13353,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Setting up the small‑signal model for $Z_{out}$\n\nTo find the output impedance we deactivate the independent sources: $V_{in}\\to 0$, $V_b\\to 0$, $V_{DD}\\to 0$ (AC ground), and we inject a test voltage $v$ at $V_{out}$.\n\n* **M2** has its gate *and* source at AC ground, so it degenerates into $r_{o2}$ in parallel with the capacitances that hang from its drain to ground ($C_{gd2},C_{bd2},\\dots$). Call that lumped capacitance $C_{out}$.\n* **M1** (PMOS) has its source at $V_{DD}$ (AC ground) and its drain at the test node $v$. Its gate is *not* at AC ground: it is tied to the (now grounded) input only through $R_S$.\n\nSo the only interesting node is the gate of M1, call its voltage $v_g$. It connects to the rest of the circuit through $R_S$ (to ground), $C_{gs1}$ (to ground, since the source is AC ground) and the Miller capacitance $C_{gd1}$ (to the output node $v$).\n\n## The gate is coupled to the output\n\nWriting KCL at the gate (no current enters the gate terminal):\n\n$$v_g\\left(\\tfrac{1}{R_S}+sC_{gs1}+sC_{gd1}\\right)=sC_{gd1}\\,v \\quad\\Rightarrow\\quad v_g=\\frac{sC_{gd1}R_S}{1+sR_S(C_{gs1}+C_{gd1})}\\,v$$\n\nIn the mid‑band, where $|sR_S C_{gs1}|<\\!1$ but $sC_{gd1}R_S$ is not negligible, this reduces to\n\n$$v_g \\approx sR_S C_{gd1}\\,v = R_S C_{gd1}\\,\\frac{dv}{dt}$$\n\ni.e. **a change in the output voltage is reproduced at the gate through $C_{gd1}$ and $R_S$.** This is the crucial point: $R_S$ is what keeps the gate from being a simple AC ground. If $R_S=0$, then $v_g=0$ and the effect disappears.\n\n## The transconductance turns that into a \"negative capacitor\"\n\nFor a PMOS the small‑signal current *into* the drain is $i_{d1}=-g_{m1}v_{gs1}+v/r_{o1}=-g_{m1}v_g+v/r_{o1}$. Substituting $v_g$:\n\n$$-g_{m1}v_g \\approx -s\\,g_{m1}R_S C_{gd1}\\,v = -g_{m1}R_S C_{gd1}\\,\\frac{dv}{dt}$$\n\nPhysically: when $v$ rises, $C_{gd1}$ pushes $v_g$ up, which *decreases* the PMOS current flowing into the output node — so the node sees a current proportional to $-dv/dt$. That is exactly the current–voltage relation of a **negative capacitance** of value $g_{m1}R_S C_{gd1}$ in parallel with the node.\n\n## Net output admittance\n\nCollecting everything at the output node:\n\n$$Y_{out}(s)\\approx G + s\\big(C_{out}-g_{m1}R_S C_{gd1}\\big),\\qquad G=\\tfrac{1}{r_{o1}}+\\tfrac{1}{r_{o2}}$$\n\nThe term in brackets is the *effective* susceptance: the physical capacitance $C_{out}$ (capacitive, $+j\\omega$) is cancelled by the $g_{m1}R_S C_{gd1}$ feedback term (inductive, $-j\\omega$).\n\n* If $g_{m1}R_S C_{gd1}<C_{out}$, the node looks capacitive (the usual case).\n* **If $g_{m1}R_S C_{gd1}>C_{out}$**, the net susceptance is *negative*: $Y_{out}=G-j\\omega\\,\\Delta C$ with $\\Delta C=g_{m1}R_S C_{gd1}-C_{out}>0$. Then\n\n$$Z_{out}=\\frac{1}{G-j\\omega\\Delta C}\\approx \\frac{1}{G}+j\\omega\\,\\frac{\\Delta C}{G^{2}}$$\n\nwhich is a resistor $R=1/G=r_{o1}\\,\\|\\,r_{o2}$ **in series with an inductor**\n\n$$\\boxed{\\,L_{out}\\approx \\big(g_{m1}R_S C_{gd1}-C_{out}\\big)\\,(r_{o1}\\,\\|\\,r_{o2})^{2}\\,}$$\n\n## Summary of the mechanism\n\n1. $R_S$ prevents the gate of M1 from being an AC ground.\n2. The Miller capacitance $C_{gd1}$ feeds the output voltage back to that gate.\n3. M1's transconductance converts that gate voltage into an output current proportional to $-dv/dt$ (a negative capacitance).\n4. When that negative capacitance exceeds the real capacitance sitting at the output node, the total output admittance has a negative imaginary part, and $Z_{out}$ therefore behaves as a series $R$–$L$ — i.e. it is **inductive**.\n\nThe effect is most visible over a band of frequencies (it vanishes at DC and, at very high frequency, when the gate divider saturates so that $v_g\\to (C_{gd1}/C_{gs,eq})v$ and the $g_m$ term becomes purely resistive). This is the same physics responsible for the inductive output impedance of source followers and common‑source stages with gate resistance; it is sometimes exploited for impedance matching or peaking, but it can also produce peaking or even instability in the amplifier's frequency response.",
        "format": "markdown",
        "sha256": "b842ddda80a39171759ebeffabc0b55b2a9c5c7bcbad4d57676bc3d620220898"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misreads M1’s connections and attributes inductive behavior to Cgd feedback and a negative-capacitance condition. The relevant mechanism is the RS–CGS1 network in the source follower, which makes Zout rise from about 1/gm1 toward RS when RS > 1/gm1.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1377,
        "output_tokens": 16905,
        "total_tokens": 18282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1377,
        "output_tokens": 16905,
        "total_tokens": 18282,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What each device looks like from the output node\n\nTo find the output impedance we deactivate the independent sources ($V_{in}=0$, $V_b=0$ at AC) and look into $V_{out}$.\n\n* **M2** has its gate and source at AC ground, so its drain–source channel carries no $g_m$ current. From $V_{out}$ it is just a resistor $r_{o2}$ (plus its junction capacitances). A parallel resistance does **not** change the sign of the reactance (one can verify $\\operatorname{Im}[Z_1\\|R]$ has the same sign as $\\operatorname{Im}[Z_1]$), so M2 cannot \"destroy\" an inductive character; it only adds a real part.\n\n* **M1** is the interesting one. Its **drain is at $V_{DD}$ (AC ground)**, its **source is the output node**, and its **gate is tied to ground through $R_S$**. So M1 is a *source follower* driven through a gate resistance $R_S$. A follower driven by an ideal voltage source has the purely resistive output impedance $1/g_m$; the series $R_S$ is exactly what makes it inductive.\n\n## Small‑signal result at the source of M1\n\nApply a test voltage $v$ at the source, with $v_d=0$ and the gate connected to ground via $R_S$. With $v_g$ the gate voltage, KCL at the gate and at the source gives\n\n$$v_g = v\\,\\frac{sR_S C_{gs}}{1+sR_S(C_{gs}+C_{gd})},\\qquad\ni = \\frac{v}{r_o}+(v-v_g)(g_m+sC_{gs})$$\n\nso the impedance looking into the source of M1 is\n\n$$Z_1(s)=\\frac{1+sR_S(C_{gs}+C_{gd})}{\\left(g_m+\\tfrac{1}{r_o}\\right)+s\\!\\left[C_{gs}+g_mR_S C_{gd}+\\tfrac{R_S(C_{gs}+C_{gd})}{r_o}\\right]+s^2R_S C_{gs}C_{gd}} .$$\n\nThis ratio has a **left‑half‑plane zero** in the numerator at\n\n$$\\omega_z=\\frac{1}{R_S(C_{gs}+C_{gd})}$$\n\nand a pole at a higher frequency $\\omega_p\\approx (g_m+1/r_o)/(C_{gs}+g_mR_S C_{gd})$. Expanding $Z_1$ for small $s$,\n\n$$Z_1(s)\\approx \\frac{1}{g_m}+s\\,\\frac{R_S(C_{gs}+C_{gd})}{g_m}+\\cdots = R_0 + sL_{eff},$$\n\nwith $R_0=1/g_m$ and\n\n$$\\boxed{L_{eff}\\approx \\frac{R_S(C_{gs}+C_{gd})}{g_m}\\;\\;(\\approx R_S C_{gs}/g_m).}$$\n\nThe positive coefficient of $s$ is an **inductor**.\n\n## Why this is inductive, physically and mathematically\n\n* The inductive band exists only when the zero lies *below* the pole, i.e. $\\omega_z<\\omega_p$, which reduces to\n\n$$R_S>\\frac{1}{g_m}.$$\n\nThat is why the output impedance *can* be inductive – it requires $R_S$ to be larger than the follower's intrinsic output resistance. If $R_S<1/g_m$ the pole comes first and the impedance is capacitive at high frequency.\n\n* In the band $\\omega_z\\ll\\omega\\ll\\omega_p$ the zero dominates the numerator and the pole has not yet acted, so $Z_1(s)\\approx L_{eff}\\,s=j\\omega L_{eff}$: the impedance grows as $+j\\omega$, i.e. the current drawn from the node **lags** the applied voltage – the defining property of an inductor.\n\n* The mechanism: a test voltage $v$ at the source does not appear at the gate because of $R_S$. The gate capacitive current flowing through $R_S$ creates a gate voltage $v_g$ that is a *filtered, phase‑shifted* copy of $v$. The transconductance then converts $v_{gs}=v_g-v$ into a source current whose frequency‑dependent part is proportional to $-s\\,v$ (a \"negative capacitor\"), which is equivalent to an inductor. In other words, $R_S$ turns the gate capacitance into a current that feeds back in such a way that the output node presents an inductive reactance.\n\n* Adding M2 in parallel as $r_{o2}$ (a large resistance) preserves this positive phase, so the **total** output impedance $Z_{out}=Z_1\\|r_{o2}$ is inductive over the same frequency range.\n\n## Summary\n\nThe series gate resistor $R_S$ of the source‑follower M1, together with $C_{gs}$ and $C_{gd}$, places a LHP zero in $Z_{out}(s)$ below the dominant pole (provided $R_S>1/g_m$). Between that zero and pole the impedance behaves as $j\\omega L$ with $L\\approx R_S(C_{gs}+C_{gd})/g_m$. Hence the circuit's output impedance is not the purely resistive $1/g_m$ one would expect from an ideal follower, but can be **inductive**. (This parasitic inductance is sometimes exploited for on‑chip inductors and input matching, but can also cause bandwidth peaking and stability problems.)",
        "format": "markdown",
        "sha256": "f088eb76bd5cb0f2bab6d732f742782c47c2d4f47612dfab53850dd0008ad100"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies M1 as a source follower and the RS-CGS mechanism, with the right condition RS > 1/gm for inductive behavior. However, the small-s expansion gives an incorrect effective inductance, and the answer omits the key 1/gm-to-RS impedance transition.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1377,
        "output_tokens": 18540,
        "total_tokens": 19917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1377,
        "output_tokens": 18540,
        "total_tokens": 19917,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17282,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe schematic contains two nMOS transistors whose **gate of each is tied to the drain of the other** (a cross‑coupled pair):\n\n* **M1** – gate = node *X*, source = gnd, drain = *V*out (top node, also across *R*D1 to *V*DD).\n* **M2** – gate = *V*out, source = gnd, drain = node *X*.\n* A current source *I*in injects current into node *X*.\n\nSo node *X* is connected to {top of *I*in, gate of M1, drain of M2} and the output node is connected to {bottom of *R*D1, drain of M1, gate of M2, *V*out}.\n\n## DC operating point\n\n**Node X (KCL).** The gate of M1 draws no current, so all of *I*in must flow through M2:\n\n$$I_{D2} = I_{in}$$\n\n**M2 (saturation).** With source at gnd, $V_{GS2}=V_{out}$. Hence\n\n$$I_{in}=\\tfrac{\\beta_2}{2}(V_{out}-V_{th2})^2 \\;\\Rightarrow\\; \\boxed{V_{out}=V_{th2}+\\sqrt{\\tfrac{2I_{in}}{\\beta_2}}}$$\n\nwhere $\\beta_n=\\mu_n C_{ox}(W/L)_n$. This is the central result: **the output voltage equals the gate‑source voltage M2 needs to carry $I_{in}$** – i.e. M2 acts as the current‑to‑voltage element.\n\n**Output node (KCL).** The same current that leaves M1's drain comes from *R*D1:\n\n$$I_{D1}=\\frac{V_{DD}-V_{out}}{R_{D1}}$$\n\n**M1 (saturation).** $V_{GS1}=V_X$, so\n\n$$V_X = V_{th1}+\\sqrt{\\tfrac{2I_{D1}}{\\beta_1}} = V_{th1}+\\sqrt{\\frac{2(V_{DD}-V_{out})}{\\beta_1 R_{D1}^2}}$$\n\n**Headroom / saturation conditions** for the intended region:\n\n* M2 in saturation: $V_X \\ge V_{OV2}=\\sqrt{2I_{in}/\\beta_2}$\n* M1 in saturation: $V_{out} \\ge V_{OV1}=\\sqrt{2I_{D1}/\\beta_1}$\n* $0<V_{out}<V_{DD}$ (so $I_{D1}>0$).\n\nNote that *M1* and *R*D1 do **not** set $V_{out}$; they only set $V_X$ and provide the bias path from *V*DD. The gain is essentially independent of $R_{D1}$ and of M1's size.\n\n## Small‑signal (transresistance) analysis\n\nLet $g_{m1},g_{m2}$ be the transconductances (with $I_{D2}=I_{in}$, $g_{m2}=\\sqrt{2\\beta_2 I_{in}}$), and include output conductances $g_{o1}=1/r_{o1},\\,g_{o2}=1/r_{o2}$ and $g_R=1/R_{D1}$.\n\n* Node X: $i_{in}=g_{m2}\\,v_{out}+v_x/r_{o2}$\n* Node $V_{out}$: $0=v_{out}(g_R+g_{o1})+g_{m1}\\,v_x$\n\nEliminating $v_x$:\n\n$$\\boxed{\\frac{v_{out}}{i_{in}}=\\frac{1}{\\,g_{m2}-\\dfrac{g_R+g_{o1}}{g_{m1}\\,r_{o2}\\,}} \\;\\approx\\; \\frac{1}{g_{m2}}\\left(1+\\frac{g_R+g_{o1}}{g_{m1}g_{m2}r_{o2}}\\right)}$$\n\nSo, to first order, the circuit is a **current‑to‑voltage (transresistance) converter** with\n\n$$R_T \\equiv \\frac{dV_{out}}{dI_{in}} \\approx \\frac{1}{g_{m2}} = \\frac{1}{\\sqrt{2\\beta_2 I_{in}}}$$\n\n## Feedback nature\n\nThe cross‑coupling (M1 gate←M2 drain, M2 gate←M1 drain) closes a **positive‑feedback** loop. The return ratio is\n\n$$A_F=\\frac{g_R+g_{o1}}{g_{m1}\\,g_{m2}\\,r_{o2}}$$\n\nwhich multiplies the open‑loop $1/g_{m2}$ by $1/(1-A_F)$, i.e. it *boosts* the transresistance slightly. The intended (both‑saturation) operating point is the stable one only while $A_F<1$; if dimensions/bias make $A_F\\to1$, the regenerative pair latches (the $V_{out}$ node exhibits negative differential resistance). With ideal transistors ($r_o\\to\\infty$) the feedback term vanishes and $v_{out}=i_{in}/g_{m2}$ exactly.\n\n## Summary\n\n* $I_{in}$ is forced through M2, and because M2's gate is at the output, $V_{out}=V_{GS2}(I_{in})=V_{th2}+\\sqrt{2I_{in}/\\beta_2}$.\n* The differential transresistance is $\\approx 1/g_{m2}$, set by M2 only; M1 and $R_{D1}$ set the bias voltage $V_X$ and the supply headroom.\n* The gate–drain cross‑coupling gives a small positive‑feedback (regenerative) correction; the operating point is valid when both devices stay in saturation and $A_F<1$.\n\nIn short, the figure is a **cross‑coupled, positive‑feedback current‑to‑voltage converter** whose output tracks the gate‑source voltage of M2 required to pass $I_{in}$, with a small‑signal gain of about $1/g_{m2}$.",
        "format": "markdown",
        "sha256": "f215548a8091681352c315a638d6f3e00330ba328009e1733072586756045715"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies M2’s gate at Vout and the positive-feedback loop, and explicitly recognizes possible regenerative latching, satisfying the golden solution’s full-credit rule. Its detailed loop-gain and stability condition is flawed, but that rule does not require a precise formula.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1728,
        "output_tokens": 17670,
        "total_tokens": 19398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1728,
        "output_tokens": 17670,
        "total_tokens": 19398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic\n\nBoth devices are **NMOS** (source arrow at the grounded terminal).\n\n| Node | Connection |\n|------|------------|\n| $V_{out}$ | drain of $M_1$, gate of $M_2$, and one end of $R_{D1}$ |\n| $X$ | gate of $M_1$, drain of $M_2$, top of $I_{in}$ |\n| $M_1$ source, $M_2$ source | ground |\n| $R_{D1}$ | $V_{DD}\\rightarrow V_{out}$ |\n| $I_{in}$ | ground $\\rightarrow X$ (sources current *into* $X$) |\n\nSo $M_1$ and $M_2$ form a **cross‑coupled pair**: the drain of each is tied to the gate of the other. One drain carries a resistive load to $V_{DD}$, the other carries a current source to ground. The input is a current $I_{in}$, the output is $V_{out}$ → it is a **transresistance (I–V) circuit**.\n\n## 2. DC operating point\n\nLet $K_i=\\tfrac12\\mu C_{ox}(W/L)_i$ and assume both transistors are in saturation (checked below).\n\n* $M_1$: $I_{D1}=K_1(V_X-V_{th1})^2$\n* $M_2$: $V_{GS2}=V_{out}$, so $I_{D2}=K_2(V_{out}-V_{th2})^2$\n\nKCL at $X$ (gate of $M_1$ draws no current) forces the entire current source through $M_2$:\n\n$$I_{D2}=I_{in}\\quad\\Rightarrow\\quad \\boxed{V_{out}=V_{th2}+\\sqrt{\\frac{I_{in}}{K_2}}}$$\n\nKCL at the $V_{out}$ node (gate of $M_2$ draws no current) gives the resistor current = $I_{D1}$:\n\n$$\\frac{V_{DD}-V_{out}}{R_{D1}}=K_1(V_X-V_{th1})^2\\quad\\Rightarrow\\quad \\boxed{V_X=V_{th1}+\\sqrt{\\frac{V_{DD}-V_{out}}{K_1 R_{D1}}}}$$\n\n**Key observation:** $V_{out}$ is set *only* by $I_{in}$ and $M_2$; $M_1$ and $R_{D1}$ do **not** appear in it. Their only DC job is to fix the floating node $X$ (so that $M_2$'s $V_{DS}$ is large enough to keep it in saturation).\n\n**Saturation conditions** (must be verified after solving):\n$M_2$: $V_X\\ge V_{out}-V_{th2}$ ; $M_1$: $V_{out}\\ge V_X-V_{th1}$. Together these require $V_{out}-V_{th2}\\le V_X\\le V_{out}+V_{th1}$, which is satisfiable.\n\n## 3. Small‑signal analysis\n\nLet $v_x, v_{out}$ be the small‑signal voltages.\n\n**Neglecting $r_o$ first.** $M_2$ gives $i_{in}=g_{m2}\\,v_{out}$, while $M_1$'s drain equation only determines $v_x=-v_{out}/(g_{m1}R_{D1})$ and does not feed back into $i_{in}$. Hence\n\n$$\\boxed{\\frac{v_{out}}{i_{in}}=\\frac{1}{g_{m2}}=\\frac{1}{\\sqrt{4K_2 I_{in}}}=\\frac{1}{\\sqrt{2\\mu C_{ox}(W/L)_2\\,I_{in}}}}$$\n\nThe transresistance is set by $M_2$ alone; $M_1$ and $R_{D1}$ cancel out of the gain.\n\n**Including $r_o$ (the important physics).** With $i_{in}$ injected,\n$v_x=-v_{out}\\big(R_{D1}\\|r_{o1}\\big)g_{m1}/1$ (from $M_1$), and $i_{in}=g_{m2}v_{out}+v_x/r_{o2}$, giving\n$\\dfrac{v_{out}}{i_{in}}=\\dfrac{1}{\\,g_{m2}-\\dfrac{1/R_{D1}+1/r_{o1}}{g_{m1}r_{o2}}\\,}$ — a slight increase over $1/g_{m2}$.\n\n**Output resistance** (set $i_{in}=0$, apply $v_t$ at $V_{out}$): node $X$ sees only $M_2$'s drain, so $0=g_{m2}v_t+v_x/r_{o2}\\Rightarrow v_x=-g_{m2}r_{o2}v_t$, and\n$$R_{out}=\\frac{v_t}{i_t}=\\frac{1}{\\dfrac{1}{R_{D1}}+\\dfrac{1}{r_{o1}}-g_{m1}g_{m2}r_{o2}}$$\n\n**Loop gain / stability.** Forward path $M_1$: $A=-g_{m1}(R_{D1}\\|r_{o1})$. Return path $M_2$ (drain open): $\\beta=v_x/v_{out}=-g_{m2}r_{o2}$. Thus\n$$L=A\\beta=+g_{m1}g_{m2}r_{o2}(R_{D1}\\|r_{o1})>0$$\nwhich is normally $\\gg1$ (e.g. $g_m\\!\\sim\\!0.5$ mS, $r_o\\!\\sim\\!20$ k$\\Omega$ gives $L\\sim$ tens). The negative sign of the last term in $R_{out}$ confirms it: **$R_{out}<0$**.\n\n## 4. Interpretation\n\n* As a *DC* I–V converter the circuit works: $V_{out}=V_{th2}+\\sqrt{I_{in}/K_2}$, a square‑law (diode‑like) transfer, with $M_1+R_{D1}$ biasing the internal node $X$ to hold $M_2$ in saturation.\n* As a *small‑signal linear amplifier* the cross‑coupling is **positive feedback** ($L>1$), producing a **negative output resistance**. With the unavoidable parasitic capacitances at $X$ and $V_{out}$ this places a pole in the right‑half plane, so the biased operating point is **unstable**: the stage will latch to a rail or oscillate. In that sense the topology is a **regenerative (comparator/oscillator) circuit**, not a stable linear amplifier.\n\n**Summary of element roles:** $I_{in}$ sets $V_{out}$ through the square‑law characteristic of $M_2$; $M_1$ with $R_{D1}$ is a self‑biasing network that fixes $V_X$ and, through the $r_o$ terms, closes a positive‑feedback loop that makes the linearized circuit regenerative (negative $R_{out}$).",
        "format": "markdown",
        "sha256": "a579a0dcd548258553459bbdd7e1d1490435f50560807d7b9fe472ee19ef8267"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, recognizes the positive-feedback loop through M1 and M2, and states the resulting instability and latching behavior. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1728,
        "output_tokens": 12912,
        "total_tokens": 14640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1728,
        "output_tokens": 12912,
        "total_tokens": 14640,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11242,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit actually is\n\nReading the terminals carefully (both devices are NMOS, no inversion bubbles):\n\n| Device | Gate | Drain | Source |\n|--------|------|-------|--------|\n| M₁ | node **X** | **V_out** | gnd |\n| M₂ | node **V_out** | node **X** | gnd |\n\nSo the gate of each transistor is connected to the *drain* of the other, and the two drains carry a pull‑up (R_D1 at V_out) and a forced current (I_in at X). **M₁ and M₂ form a cross‑coupled pair.** M₁ is an inverter (X → V_out), M₂ is an inverter (V_out → X); two invators in a ring = **positive (regenerative) feedback** – i.e. a 2‑transistor latch / memory‑cell‑type circuit, not an ordinary linear amplifier.\n\nLet k_i = ½ μ_n C_ox (W/L)_i, V_t the threshold, r_o_i = 1/(λ_i I_Di).\n\n## 2. DC operating points\n\nKCL (gate currents are zero):\n\n* Node X:  **I_D2 = I_in**\n* Node V_out:  **I_D1 = (V_DD − V_out)/R_D1**\n\n**Point A – both in saturation** (the \"mid‑point\"):\n\n$$V_{out}^{(A)} = V_t + \\sqrt{I_{in}/k_2}$$\n$$I_{D1}^{(A)} = \\frac{V_{DD}-V_{out}^{(A)}}{R_{D1}},\\qquad V_X^{(A)} = V_t + \\sqrt{I_{D1}^{(A)}/k_1}$$\n\n(valid while V_out ≥ V_X − V_t and V_X ≥ V_out − V_t).\n\n**Point B – M₁ cut off, M₂ in triode** (the *stable* point, because the bias is asymmetric – I_in forces M₂ to conduct, so M₂ can never be off, whereas M₁ can):\n\n$$V_{out}^{(B)} = V_{DD},\\quad I_{D1}=0$$\n$$V_X^{(B)} = (V_{DD}-V_t) - \\sqrt{(V_{DD}-V_t)^2 - I_{in}/k_2}\\;\\;\\approx\\;\\frac{I_{in}}{2k_2(V_{DD}-V_t)}\\quad(\\ll V_t)$$\n\n(valid while V_X^{(B)} < V_t and I_in ≤ k_2(V_DD−V_t)²).\n\n*Quick numeric check* (k₁=k₂=0.5 mA/V², V_t=0.5 V, V_DD=1.8 V, R_D1=10 kΩ, I_in=100 µA): Point A = (V_out, V_X)=(0.95 V, 0.91 V); Point B = (1.8 V, 0.08 V).\n\n## 3. Small‑signal / feedback analysis\n\nLet v_x, v_out be the ac signals at X and V_out (i_in = 0 for now).\n\n* M₁: i_d1 = g_m1 v_x + v_out/r_o1\n* M₂: i_d2 = g_m2 v_out + v_x/r_o2\n* Node X: i_d2 = 0  ⇒  **v_x = −g_m2 r_o2 v_out**\n* Node V_out: v_out/R_D1 + i_d1 = 0\n\nSubstituting:\n\n$$v_{out}\\left[\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}-g_{m1}g_{m2}r_{o2}\\right]=0$$\n\nA non‑zero v_out exists only when the **loop gain** equals 1:\n\n$$\\boxed{T = g_{m1}\\,g_{m2}\\,r_{o2}\\,(R_{D1}\\!\\parallel\\! r_{o1})}$$\n\nThe sign is **positive** (trace it: V_out↑ → M₂ wants more current → to keep I_in constant V_X must fall → M₁ wants less current → V_out rises further). At Point A, T ≫ 1 (with the numbers above T ≈ 10²), so the all‑saturation point is **unstable**.\n\n**Output resistance** at V_out (inject a test current, i_in = 0):\n\n$$R_{out}=\\frac{1}{\\frac{1}{R_{D1}}+\\frac{1}{r_{o1}}-g_{m1}g_{m2}r_{o2}}=\\frac{R_{D1}\\!\\parallel\\! r_{o1}}{1-T}$$\n\n* At Point A: T > 1 ⇒ **R_out < 0** (negative resistance – the algebraic signature of regeneration).\n* At Point B: g_m1 = 0 ⇒ T = 0 ⇒ **R_out ≈ R_D1** (positive, stable).\n\n**Transconductance** from a small modulation i_in to v_out (about Point A):\n\n$$\\frac{v_{out}}{i_{in}}=\\frac{1}{g_{m2}\\left(1-\\tfrac{1}{T}\\right)}$$\n\nthe denominator being reduced by the positive feedback (it would diverge as T→1).\n\n## 4. Conclusion / function\n\nThe circuit is a **cross‑coupled, positive‑feedback (regenerative) NMOS pair** – the simplest MOS latch. The two transistors \"fight\" for the two nodes; the all‑on saturation solution is the **unstable switching threshold**, and the dynamics drive the circuit to a hard limit. Because the bias is asymmetric (resistive pull‑up on V_out, current‑source pull on X), there is only **one stable resting state: M₁ off, M₂ on, V_out ≈ V_DD and V_X ≈ I_in / [2k₂(V_DD−V_t)]** (a small voltage). If the two sides were made symmetric the circuit would be **bistable** and would operate as a 1‑bit latch / flip‑flop, the two stable states being \"M₁ on / M₂ off\" and \"M₁ off / M₂ on\".\n\nIn short: it is **not** a voltage amplifier; it is a regenerative (positive‑feedback) element whose negative output resistance at the mid‑point and its latching behaviour are the expected results of the analysis.",
        "format": "markdown",
        "sha256": "389c8a51ce1a39373a2f84b10c0bd5e8e615aae1f1a1fd381e928d79874af5ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₂’s gate connection, the positive-feedback loop, and the resulting unstable regenerative operating point. The golden solution’s full-credit rule does not require precise formulas, and the candidate gives multiple valid consequences.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1728,
        "output_tokens": 20358,
        "total_tokens": 22086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1728,
        "output_tokens": 20358,
        "total_tokens": 22086,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18891,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nIt is a **two‑stage CMOS amplifier with local (parallel‑parallel / shunt‑shunt) feedback**, used as a **transimpedance amplifier (TIA)**: the input is a *current* $I_{in}$, the output is a *voltage* $V_{out}$.\n\n* **Stage 1 – $M_1$ (common‑gate):** gate at the AC‑ground bias $V_b$, input at the source, output at the drain (node $X$). The CG stage provides a low input resistance, which is desirable for a current input.\n* **Stage 2 – $M_2$ (common‑source):** gate at $X$, source grounded, output at the drain $V_{out}$. Provides the voltage gain and inverts the phase.\n* **Feedback element $R_F$:** connects $V_{out}$ back to the *source* of $M_1$ (the input node). The feedback current is $i_{RF}=(v_{out}-v_s)/R_F$ (arrow direction in the figure). Because the feedback *samples the output voltage* and *mixes as a current* at the input node, it is **shunt‑shunt feedback**, which (i) makes the closed‑loop gain a transimpedance, (ii) *lowers* the input resistance, and (iii) *lowers* the output resistance.\n* $R_{D1}, R_{D2}$ are the active (resistive) loads; $V_{DD}$ and $V_b$ are AC grounds.\n\n## 2. DC operating point (qualitative)\n\n$I_{in}$ (DC) is the bias current of $M_1$, but part of it also flows through $R_F$, so $I_{in}=I_{D1}+I_{RF,DC}$. The DC loop through $R_F$ self‑stabilises the bias. $V_b$ is chosen so that $M_1$ is in saturation ($V_X>V_{OV1}$ and $V_X>V_b$), and $V_X$ then biases $M_2$ on; $M_2$ must satisfy $V_{out}>V_X$ for saturation. The exact Q‑point is the solution of these coupled equations; the small‑signal analysis below is about that point.\n\n## 3. Small‑signal model and node equations\n\nLet $v_s$ = voltage of the $M_1$ source node, $v_x$ = node $X$, $v_o$ = $V_{out}$. Neglect $r_o$ and body effect (including $r_{o1},r_{o2}$ only adds parallel resistances and does not change the conclusions). With $v_{gs1}=-v_s$ and $v_{gs2}=v_x$:\n\n* $M_1$ drain current (into drain): $i_{d1}=-g_{m1}v_s$\n* $M_2$ drain current (into drain): $i_{d2}=g_{m2}v_x$\n\nKCL at the three nodes (currents leaving the node = 0):\n\n* Node $X$: $\\ \\dfrac{v_x}{R_{D1}}+i_{d1}=0 \\ \\Rightarrow\\ v_x=g_{m1}R_{D1}\\,v_s$\n* Node $s$: $\\ -i_{in}-i_{d1}+\\dfrac{v_s-v_o}{R_F}=0 \\ \\Rightarrow\\ i_{in}=g_{m1}v_s+\\dfrac{v_s-v_o}{R_F}$\n* Node $o$: $\\ \\dfrac{v_o}{R_{D2}}+i_{d2}+\\dfrac{v_o-v_s}{R_F}=0$\n\n## 4. Transimpedance gain $G_m=v_o/i_{in}$\n\nSolving the three equations gives the exact (r_o‑free) result\n\n$$\\boxed{\\,G_m=\\frac{v_o}{i_{in}}=\\frac{R_{D2}\\,\\big(1-g_{m1}g_{m2}R_{D1}R_F\\big)}{1+g_{m1}R_{D2}+g_{m1}R_F+g_{m1}g_{m2}R_{D1}R_{D2}}\\,}$$\n\n**High‑loop‑gain limit** ($g_{m1}g_{m2}R_{D1}R_{D2}\\gg 1$): the gain is set almost entirely by the feedback resistor,\n\n$$\\boxed{\\,v_o \\approx -\\,R_F\\, i_{in}\\,}$$\n\ni.e. the circuit behaves as an ideal TIA with transimpedance $R_F$, **independent of the transistor parameters** – the main advantage of the feedback (good matching, linearity, and stability of gain). The minus sign reflects the inverting action of the common‑source stage.\n\n## 5. Input and output resistance\n\n**Input resistance** $Z_{in}=v_s/i_{in}$:\n\n$$Z_{in}=\\frac{R_{D2}+R_F}{1+g_{m1}R_{D2}+g_{m1}R_F+g_{m1}g_{m2}R_{D1}R_{D2}}\\ \\approx\\ \\frac{1}{g_{m1}}\\cdot\\frac{1}{1+T}$$\n\nThe open‑loop input resistance of a CG stage is $\\approx 1/g_{m1}$; the shunt feedback divides it by $(1+T)$, so $Z_{in}\\ll 1/g_{m1}$. This low $Z_{in}$ is what lets the stage absorb the input current with a small $v_s$ (a \"virtual\" low‑impedance node).\n\n**Output resistance** $Z_{out}$ (set $i_{in}=0$, drive $v_o$):\n\n$$Z_{out}=\\left[\\frac{1}{R_{D2}}+\\frac{g_{m1}(1+g_{m2}R_{D1})}{1+g_{m1}R_F}\\right]^{-1}\\ \\approx\\ \\frac{R_{D2}}{1+\\dfrac{g_{m2}R_{D1}R_{D2}}{R_F}}$$\n\nWithout feedback $Z_{out}\\approx R_{D2}$; the shunt‑shunt feedback reduces it by the factor $\\approx 1+g_{m2}R_{D1}R_{D2}/R_F$, giving a low, well‑defined output resistance – again a desirable TIA property.\n\n## 6. Summary / design notes\n\n* **Function:** CG + CS amplifier with shunt‑shunt feedback through $R_F$ → a low‑$Z_{in}$, low‑$Z_{out}$ transimpedance amplifier.\n* **Gain:** $G_m = v_o/i_{in}$ is given exactly above and equals $\\approx -R_F$ for large loop gain, hence robust against process/temperature variations of $g_m$ and $r_o$.\n* **Impedances:** $Z_{in}$ and $Z_{out}$ are both suppressed by the feedback loop, improving bandwidth and the ability to drive/load the node.\n* **Trade‑offs:** $R_F$ sets the gain but also loads the output (and, through the high $R_{D2}$, limits the loop gain and hence the actual gain‑boost and bandwidth); the $R_F$–$C_{out}$ pole and the CG node capacitance must be checked for stability (feedback can introduce a peaking/phase‑margin issue if $R_F$ is too large relative to the output impedance). Choosing $R_F$, $R_{D1}$, $R_{D2}$ and the biases so that $g_{m1}g_{m2}R_{D1}R_{D2}/R_F\\gg 1$ with adequate phase margin gives a TIA whose gain is essentially $R_F$.",
        "format": "markdown",
        "sha256": "fc02a9787f8268b4983456c08c67aa226cf646843708a373719b1cfa20107cb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as feedback from Vout to the input node, forming a transimpedance amplifier. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1949,
        "output_tokens": 14082,
        "total_tokens": 16031,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1949,
        "output_tokens": 14082,
        "total_tokens": 16031,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12304,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit function\n\nThe schematic is a **two‑stage MOS amplifier with shunt–shunt (voltage‑sampling, current‑mixing) negative feedback** implemented by $R_F$. The input is a current $I_{in}$ and the output is a voltage $V_{out}$, so it is a **transresistance (transimpedance) amplifier**.\n\n* $M_1$ (gate biased by the DC voltage $V_b$) works as a **common‑gate** front end: its source (call it node $S$) is the input node, its drain is node $X$.\n* $M_2$ (gate = $X$, source = ground) works as a **common‑source** inverting gain stage; its drain is $V_{out}$.\n* $R_{D1}, R_{D2}$ are the drain loads (and set the DC bias); $R_F$ feeds a portion of $V_{out}$ back as a current into node $S$.\n\nAssume both devices are NMOS biased in saturation ($V_b$ chosen so that $M_1$ conducts; $X$ high enough to keep $M_2$ on).\n\n## Small‑signal model (r_o ignored)\n\nLet $v_x, v_s, v_{out}$ be the small‑signal voltages at $X$, $S$ and $V_{out}$; $V_b$ is an a.c. ground. The transistor currents are\n\n$$i_{d1} = g_{m1}(0-v_s) = -g_{m1}v_s ,\\qquad i_{d2} = g_{m2}v_x$$\n\nNode equations:\n\n* **Node X:** $\\dfrac{v_x}{R_{D1}} - g_{m1}v_s = 0 \\;\\Rightarrow\\; v_x = g_{m1}R_{D1}\\,v_s$\n* **Node S:** $i_{in} - g_{m1}v_s + \\dfrac{v_{out}-v_s}{R_F} = 0$\n* **Node $V_{out}$:** $\\dfrac{v_{out}}{R_{D2}} + g_{m2}v_x + \\dfrac{v_{out}-v_s}{R_F} = 0$\n\nSolving for $v_{out}/i_{in}$ gives the exact mid‑band transresistance\n\n$$\\boxed{\\,R_t = \\frac{v_{out}}{i_{in}} = \\frac{R_{D2}\\big(1 - g_{m1}g_{m2}R_{D1}R_F\\big)}{1 + g_{m1}(R_{D2}+R_F) + R_{D2}\\,g_{m1}g_{m2}R_{D1}}\\,}$$\n\nThe feedback is **negative only when $g_{m1}g_{m2}R_{D1}R_F > 1$** (otherwise $R_t>0$, i.e. positive feedback / unstable). In that region, and for large loop gain, the terms containing $g_{m1}g_{m2}R_{D1}R_F$ dominate and\n\n$$\\boxed{\\,R_t \\approx -R_F\\,}$$\n\ni.e. the gain is set almost entirely by the feedback resistor and is independent of $g_m$, $R_{D1}$, $R_{D2}$. The minus sign means $V_{out}$ is inverted with respect to the injected current.\n\n## Feedback interpretation\n\n* Open‑loop forward path: $M_1$ (C‑G) gives $v_x = g_{m1}R_{D1}\\,v_s$, $M_2$ (C‑S) gives $v_{out} = -g_{m2}R_{D2}\\,v_x$; the input node presents $1/g_{m1}$ and the output node $R_{D2}$.\n* Feedback factor (shunt–shunt): $H \\approx 1/R_F$.\n* Return ratio (loop gain):\n\n$$T = \\frac{R_{D2}}{R_{D2}+R_F}\\,g_{m2}R_{D1} + \\frac{1}{g_{m1}(R_{D2}+R_F)} \\;\\approx\\; g_{m2}R_{D1}\\quad (R_F \\ll R_{D2})$$\n\nHence, with $T\\gg 1$:\n\n* **Closed‑loop transresistance** $R_t \\approx R_t^{\\,ol}/(1+T) \\approx 1/H = -R_F$\n* **Input resistance** (seen by $I_{in}$, node $S$) is reduced:\n\n$$R_{in} = \\frac{1}{g_{m1} + \\frac{1}{R_{D2}+R_F} + \\frac{R_{D2}}{R_{D2}+R_F}g_{m1}g_{m2}R_{D1}} \\;\\approx\\; \\frac{1/g_{m1}}{1+T}\\quad(\\text{low})$$\n\n* **Output resistance** is reduced:\n\n$$R_{out} = \\frac{1}{\\dfrac{1}{R_{D2}} + \\dfrac{g_{m1}(1+g_{m2}R_{D1})}{1+g_{m1}R_F}} \\;\\approx\\; \\frac{R_{D2}}{1+T}\\quad(\\text{low})$$\n\nThese are exactly the properties desired of a transimpedance amplifier: it accepts a current input (low $R_{in}$) and delivers a voltage output (low $R_{out}$), with a gain $|R_t|\\simeq R_F$ that is insensitive to device‑parameter spread.\n\n## DC bias (qualitative)\n\n$V_b$ sets the $M_1$ bias current; $R_{D1}$ then fixes the DC level at $X$, which biases $M_2$. $R_{D2}$ and the $M_2$ current fix the DC level of $V_{out}$, and $R_F$ carries the DC bias current $I_{RF} = (V_S - V_{out})/R_F$. The designer chooses $V_b$ and the loads so that both transistors sit in saturation and the loop‑gain condition $g_{m1}g_{m2}R_{D1}R_F \\gg 1$ holds.\n\n## Frequency / stability comment\n\nThe dominant pole is usually at node $X$, where the resistance is $\\approx R_{D1}$ (since $M_2$'s gate draws no current and $M_1$'s drain is high‑impedance); the output pole is at higher frequency because $R_{out}$ is low. The mid‑band gain $-R_F$ is desensitised by $1+T$, but $T$ rolls off at the $X$ pole, so the closed‑loop bandwidth and phase margin must be checked (the $R_F$ network and the parasitic capacitances at $X$ and $V_{out}$ determine the frequency at which $T$ falls to unity).\n\n**Summary:** the circuit is a shunt–shunt negative‑feedback transimpedance amplifier. Its small‑signal transresistance is given exactly by the boxed expression above and, in the normal high‑loop‑gain design, reduces to $v_{out}/i_{in} \\approx -R_F$, with low input and low output resistance.",
        "format": "markdown",
        "sha256": "8489ca5034abebf36a692fb1def8e9096be3b19458686ce861ca915220b20305"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both stages, the feedback connection, and the transimpedance function, but incorrectly claims the feedback becomes positive and unstable when the transimpedance changes sign. The golden solution caps answers that call the feedback positive at 2.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1949,
        "output_tokens": 29036,
        "total_tokens": 30985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1949,
        "output_tokens": 29036,
        "total_tokens": 30985,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27361,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\nIt is a **two‑stage transresistance (current‑in / voltage‑out) amplifier** with **shunt–shunt (parallel–parallel) negative feedback** through $R_F$.\n\n| Block | Device | Configuration | Role |\n|---|---|---|---|\n| 1st stage | $M_1$ (gate = $V_b$) | **Common‑gate** | current buffer: forces $i_{d1}\\approx i_{in}$, presents a *low* impedance at node $S$ |\n| 2nd stage | $M_2$ (source = gnd) | **Common‑source** | voltage gain + **inversion**, output taken at the drain |\n| $R_{D1},R_{D2}$ | | loads / DC paths | set the DC currents and the bias point of $M_2$ |\n| $R_F$ | | feedback | samples $V_{out}$ (shunt) and returns a **current** to node $S$ (shunt mixing with $i_{in}$) |\n\nThe input current $i_{in}$ is injected *in parallel* at node $S$ (the source of $M_1$), and the feedback current $i_{RF}=(v_{out}-v_s)/R_F$ is also injected *in parallel* at the same node → **shunt mixing**. At the output, $R_F$ is in *parallel* with the output node → **shunt sampling**. Hence the closed‑loop quantity that is stabilised is the **transresistance** $R_{out}=v_{out}/i_{in}$.\n\n### Polarity (negative feedback)\n$ i_{in}\\uparrow \\Rightarrow v_s\\uparrow \\Rightarrow v_x\\uparrow $ (CG, non‑inverting) $\\Rightarrow v_{out}\\downarrow $ (CS, inverting) $\\Rightarrow i_{RF}=(v_{out}-v_s)/R_F$ becomes negative, i.e. it *subtracts* from $i_{in}$ at node $S$. ✔ negative feedback.\n\n## 2. DC operating point (qualitative)\n\nA valid Q‑point exists with both MOSFETs in saturation. $V_b$ is chosen so that $M_1$ conducts; the DC current of $M_1$ flows through $R_{D1}$ (the gate of $M_2$ takes no current), fixing $V_X=V_{DD}-I_{D1}R_{D1}$, which biases $M_2$. $M_2$ then pulls current through $R_{D2}$ and $R_F$. The DC value of $i_{RF}$ is $(V_{out}-V_S)/R_F$. The design must keep $V_X>V_{GS2}-V_{th2}$ and $V_X>V_{GS1}-V_{th1}$ (for saturation of $M_2$ and $M_1$ respectively). The small‑signal analysis below is valid around this point.\n\n## 3. Small‑signal model and node equations\n\nLet $v_x$, $v_s$, $v_{out}$ be the small‑signal voltages at nodes $X$, $S$ and $V_{out}$; $V_b$ is AC ground. Using $i_d=g_m v_{gs}+v_{ds}/r_o$ for each device:\n\n* **Node X** (only $R_{D1}$ to AC‑gnd and the drain of $M_1$):\n$$\\frac{v_x}{R_{D1}}+g_{m1}(0-v_s)+\\frac{v_x-v_s}{r_{o1}}=0 \\tag{1}$$\n* **Node S** ($i_{in}$ in, $R_F$ from $v_{out}$, source of $M_1$):\n$$i_{in}+\\frac{v_{out}-v_s}{R_F}+g_{m1}(0-v_s)+\\frac{v_x-v_s}{r_{o1}}=0 \\tag{2}$$\n* **Node $V_{out}$** ($R_{D2}$, drain of $M_2$, $R_F$):\n$$\\frac{v_{out}}{R_{D2}}+g_{m2}(v_x-0)+\\frac{v_{out}}{r_{o2}}+\\frac{v_{out}-v_s}{R_F}=0 \\tag{3}$$\n\n## 4. Transresistance gain\n\nSolving (1)–(3) for $v_{out}/i_{in}$ and taking $r_{o1},r_{o2}\\gg R$ gives the standard shunt–shunt form\n\n$$\\boxed{\\;G=\\frac{v_{out}}{i_{in}}=\\frac{-R_F}{1+1/\\mathcal{T}}\\;}$$\n\nwith loop gain\n$$\\mathcal{T}\\approx \\frac{g_{m2}\\,R_{D1}\\,(R_{D2}\\parallel r_{o2})}{R_F}\\gg 1$$\n(and a second, independent error term $\\approx 1/(g_{m1}R_F)$ coming from $v_s\\neq 0$).\n\n**Asymptotic (ideal) value.** Because $\\mathcal{T}\\gg1$,\n\n$$\\boxed{\\;\\frac{v_{out}}{i_{in}}\\;\\approx\\;-R_F\\;}$$\n\n*Physical picture:* negative feedback drives node $S$ to a **virtual ground** ($v_s\\approx0$). With $v_s=0$, $M_1$ (a current buffer) draws essentially no extra current, so the whole $i_{in}$ is forced through $R_F$:\n$$i_{in}+\\frac{v_{out}-0}{R_F}=0\\;\\Rightarrow\\;v_{out}=-i_{in}R_F .$$\nThe gain is therefore set almost entirely by the *passive* feedback element $R_F$ (hence very accurate and stable), while the active stages only provide the loop gain $\\mathcal{T}$ and the inversion.\n\n## 5. Input and output resistance\n\nShunt–shunt feedback reduces **both** resistances by $\\approx(1+\\mathcal{T})$:\n\n* **Input resistance** (looking into $S$): open‑loop $\\approx (r_{o1}+R_{D1})/(1+g_{m1}r_{o1})\\approx 1/g_{m1}$; closed‑loop\n$$R_{in}\\approx \\frac{1/g_{m1}}{1+\\mathcal{T}}\\;\\ll\\;\\frac{1}{g_{m1}}\\quad(\\text{ideal } \\to 0)$$\n  → excellent for accepting a *current* input.\n* **Output resistance** (looking into $V_{out}$): open‑loop $\\approx R_{D2}\\parallel r_{o2}$; closed‑loop\n$$R_{out}\\approx \\frac{R_{D2}\\parallel r_{o2}}{1+\\mathcal{T}}\\;\\ll\\;R_{D2}\\quad(\\text{ideal } \\to 0)$$\n  → excellent for delivering a *voltage* output.\n\n## 6. Summary\n\nThe circuit is a **current‑to‑voltage converter** (transresistance amplifier). $M_1$ (CG) buffers the input current, $M_2$ (CS) supplies gain and inversion, and $R_F$ imposes shunt–shunt negative feedback that (i) fixes the closed‑loop transresistance at **$-R_F$**, (ii) collapses the input resistance toward zero (good for current drive), and (iii) collapses the output resistance toward zero (good for voltage drive). The accuracy of $v_{out}/i_{in}=-R_F$ improves as $g_{m2}R_{D1}(R_{D2}\\parallel r_{o2})/R_F$ and $g_{m1}R_F$ increase.",
        "format": "markdown",
        "sha256": "7e1f04e05b637a03f4a3f07fbdc8c99c6a77fb046a589388d6767d4e5fc6fe8e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from Vout to the input node, forming a transimpedance amplifier. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1949,
        "output_tokens": 16154,
        "total_tokens": 18103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1949,
        "output_tokens": 16154,
        "total_tokens": 18103,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14384,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Device identification and topology\n\nReading the symbol arrows (arrow on the *source* terminal):\n\n* **M2** is a **PMOS** – its source (arrow) is tied to $V_{DD}$, its drain is the internal node $V_x$, and its gate is tied to $V_{out}$.\n* **M1** is an **NMOS** – its drain is $V_{out}$, its source (arrow) is $V_x$, and its gate is the bias $V_b$.\n\nSo M1 and M2 are in series between $V_{DD}$ and $V_{out}$, with the midpoint $V_x$ also connected to the two bottom current sources ($I_{in}$ and the sink to ground). The current source $I_1$ pulls from $V_{DD}$ into $V_{out}$. The distinctive feature is that **the gate of M2 is connected to the output node $V_{out}$**, which closes a negative‑feedback loop.\n\n## 2. DC operating point\n\nGates draw no current, so KCL gives\n\n* Node $V_{out}$: $\\;I_{D1}=I_1$  (M1 carries $I_1$).\n* Node $V_x$: $\\;I_{D1}+I_{D2}+I_{in}=I_{b}$  $\\Rightarrow$ $\\;I_{D2}=I_{b}-I_{in}-I_1$.\n\nThe bias $V_b$ sets $V_{GS1}$ so that M1 passes $I_1$; $V_{SG2}=V_{DD}-V_{out}$ then sets $V_x$ so that M2 passes $I_{D2}$. Thus the sources and $V_b$ fix the operating point, and $V_{out}$ is the resulting node voltage.\n\n## 3. Small‑signal model (as drawn)\n\nTake $V_b$, $V_{DD}$ and the ideal current sources as AC ground. Let $v_x$ and $v_{out}$ be the small‑signal voltages at $V_x$ and $V_{out}$. With $v_{g2}=v_{out},v_{s2}=0,v_{d2}=v_x$ and $v_{g1}=0,v_{s1}=v_x,v_{d1}=v_{out}$:\n\n$$i_{d2}=g_{m2}\\,v_{out}+\\frac{v_x}{r_{o2}},\\qquad i_{d1}=-g_{m1}\\,v_x+\\frac{v_{out}-v_x}{r_{o1}}$$\n\nNode $V_x$ is floating (the bottom sources are open), so $i_{d2}=i_{d1}$, which yields\n\n$$v_x=v_{out}\\,\\frac{1/r_{o1}-g_{m2}}{g_{m1}+1/r_{o1}+1/r_{o2}}$$\n\nA test source at $V_{out}$ sees $i_x=i_{d1}$, hence\n\n$$\\boxed{R_{out}=\\frac{v_{out}}{i_x}=\\left[g_{m2}+\\frac{1}{r_{o2}}\\cdot\\frac{1/r_{o1}-g_{m2}}{g_{m1}+1/r_{o1}+1/r_{o2}}\\right]^{-1}\\;\\approx\\;\\frac{1}{g_{m2}}}$$\n\n(The exact value is $1/g_{m2}$ when $r_{o1},r_{o2}\\to\\infty$.)\n\nOther small‑signal relations (open‑circuit output):\n\n$$\\frac{v_{out}}{i_{in}}\\approx\\frac{1}{g_{m2}},\\qquad \\frac{v_{out}}{v_{b}}\\approx-\\frac{1}{g_{m2}\\,r_{o2}}\\;(\\text{very small}),\\qquad Z_x\\approx\\frac{1}{g_{m1}g_{m2}r_{o1}}$$\n\nThe gate of M1 gives $R_{in}(V_b)=\\infty$. (Body‑effect terms $g_{mb}$ add to the $g_{m1}$ coefficients but do not change the order of magnitude.)\n\n## 4. Interpretation / key insight\n\nTying the gate of M2 to $V_{out}$ makes the feedback loop force **$V_{out}$ (and $V_x$) to be low‑impedance nodes**: $R_{out}\\simeq 1/g_{m2}$. The circuit therefore behaves as a *low‑output‑impedance node / degenerated buffer*, not as a high‑impedance current source.\n\nThis is the crucial contrast with the **standard cascode**, where the cascode gate is held at an AC ground. Repeating the same algebra with $v_{g2}=0$ gives\n\n$$R_{out}^{cascode}=r_{o1}+(1+g_{m1}r_{o1})\\,r_{o2}\\;\\approx\\;g_{m1}\\,r_{o1}\\,r_{o2}\\;\\gg\\;1/g_{m2}$$\n\nSo the single connection $M_2$‑gate $\\rightarrow V_{out}$ collapses the output resistance from the large cascode value down to about $1/g_{m2}$. If a high‑impedance current source is the design goal, M2's gate should be biased to AC ground instead; as drawn, the topology intentionally stabilises $V_{out}$ as a stiff, low‑impedance voltage node set by the bias currents $I_1$, $I_{in}$ and $I_b$ and by $V_b$.",
        "format": "markdown",
        "sha256": "3d32f0b7a3ca350d6110c1e152afa8c3daa80900576e30f970de92109b7bd3a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout, with the feedback returning through M2 to the input node. It gives the low input-impedance result and the expected transimpedance and output resistance of approximately 1/gm2; extra analysis does not undermine these essential conclusions.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1818,
        "output_tokens": 23013,
        "total_tokens": 24831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21743,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1818,
        "output_tokens": 23013,
        "total_tokens": 24831,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 21743,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology and device identification\n\nReading the schematic with the arrow‑on‑the‑substrate convention:\n\n* **M2 – PMOS.** Source/substrate tied to $V_{DD}$ (top rail), drain tied to the internal node that I will call **X**, gate tied to the output node $V_{\\text{out}}$.\n* **M1 – NMOS.** Source/substrate tied to node **X**, drain tied to $V_{\\text{out}}$, gate tied to the fixed bias $V_b$ (AC ground).  → **common‑gate (cascode) device.**\n* **$I_1$** – ideal current source from $V_{DD}$ to $V_{\\text{out}}$ (the load / DC bias current).\n* **$I_{in}$** – current source injected at node X (the small‑signal test / input current).\n* The second, unlabelled down‑arrow source at node X is a **DC bias current** (call it $I_{bias}$) that, together with $I_1$, fixes the operating point. (In the small‑signal model every ideal current source becomes an *open* circuit, so the exact value of $I_{bias}$ does not enter the small‑signal results.)\n\nSo the chain is $V_{DD}\\xrightarrow{M_2}\\text{X}\\xrightarrow{M_1}V_{\\text{out}}$, with $I_1$ in parallel from $V_{DD}$ to $V_{\\text{out}}$. The non‑standard feature, and the point of the circuit, is that **M2's gate is connected to the output node $V_{\\text{out}}$ instead of to a fixed bias or to a diode tie.** This introduces feedback from the output into M2.\n\n---\n\n## 2. DC (operating‑point) analysis\n\nLet $I = I_1$ (the only DC load at the open output). Then $I_{D1}=I$.\n\n* M1 (saturation): $\\;I = \\tfrac{k_1}{2}(V_b - V_X - V_{t1})^2 \\;\\Rightarrow\\; V_X = V_b - V_{t1} - \\sqrt{2I/k_1}$\n* KCL at X: $\\;I_{D2} = I + I_{bias}$  (taking $I_{in}$ as AC, i.e. 0 DC)\n* M2 (saturation): $\\;I_{D2} = \\tfrac{k_2}{2}(V_{DD} - V_{\\text{out}} - |V_{t2}|)^2 \\;\\Rightarrow\\; V_{\\text{out}} = V_{DD} - |V_{t2}| - \\sqrt{2I_{D2}/k_2}$\n\nSaturation conditions to be checked: $V_{\\text{out}}-V_X \\ge V_{GS1}-V_{t1}$ for M1 and $V_{DD}-V_X \\ge V_{SG2}-|V_{t2}|$ for M2.\n\n---\n\n## 3. Small‑signal model\n\nSet $v_x$ = signal at node X, $v_o = v_{\\text{out}}$. $V_{DD}$ and $V_b$ are AC ground; $I_1$ and $I_{bias}$ are open; body effect ignored.\n\nUsing the unified form $i_{ds}=g_m v_{gs}+(v_d-v_s)/r_o$ (current from drain node to source node):\n\n* M1 ($d{=}o,\\ s{=}x,\\ g{=}0$): $\\;i_{ds1} = -g_{m1}v_x + (v_o-v_x)/r_{o1}$  (flow $o\\to x$)\n* M2 ($d{=}x,\\ s{=}0,\\ g{=}o$): $\\;i_{ds2} = g_{m2}v_o + v_x/r_{o2}$  (flow $x\\to$ gnd)\n\n### (a) Transfer $v_{\\text{out}}/I_{in}$ (output open, test current at X)\n\nNode *o* connects only to M1's drain (gate and $I_1$ are open) ⇒ $i_{ds1}=0$, giving\n\n$$v_o = (1+g_{m1}r_{o1})\\,v_x$$\n\nNode *x*: $i_{in} = i_{ds2}-i_{ds1} = i_{ds2} = g_{m2}v_o + v_x/r_{o2}$. Substituting $v_o$:\n\n$$\\boxed{\\frac{v_{\\text{out}}}{i_{in}} = \\frac{1+g_{m1}r_{o1}}{g_{m2}(1+g_{m1}r_{o1}) + 1/r_{o2}} \\;\\approx\\; \\frac{1}{g_{m2}}}$$\n\nbecause $g_{m2}(1+g_{m1}r_{o1}) \\gg 1/r_{o2}$.\n\n### (b) Output resistance seen at $V_{\\text{out}}$ (test source at $V_{\\text{out}}$, $i_{in}=0$)\n\nWith $i_{in}=0$, KCL gives $i_{ds1}=i_{ds2}$, and the test current is $i_t=i_{ds1}$. Solving the two node equations for $v_o/i_t$:\n\n$$\\boxed{R_{\\text{out}} = \\frac{g_{m1} + 1/r_{o1} + 1/r_{o2}}{g_{m1}g_{m2} + g_{m2}/r_{o1} + 1/(r_{o1}r_{o2})} \\;\\approx\\; \\frac{1}{g_{m2}}}$$\n\n---\n\n## 4. Interpretation / design insight\n\n* In a **proper cascode current source** the cascode transistor's gate is at AC ground (fixed bias or diode‑tie at the cascode node). Then the output node (the common‑gate drain) would show the familiar large resistance $\\sim (1+g_{m1}r_{o1})\\,r_{o2}$ or $(1+g_{m2}r_{o2})\\,r_{o1}$, i.e. $I_1$ would be a stiff current source.\n* Here, however, **M2's gate is tied to the output node.** M2 therefore acts as a transconductance element that feeds $g_{m2}v_o$ back into the cascode node X. This **negative feedback collapses the output impedance to $\\approx 1/g_{m2}$** (a low value, tens of ohms for typical $g_m$). The same feedback makes the open‑circuit transresistance $v_{\\text{out}}/i_{in}\\approx 1/g_{m2}$.\n* Consequence: $V_{\\text{out}}$ is a **low‑impedance node**, not a high‑impedance current‑source output; the load current $I_1$ is *not* isolated from variations at the cascode node in the way a true cascode would provide. The common‑gate stage M1 alone gives the voltage gain factor $(1+g_{m1}r_{o1})$ from X to the output, but the gate‑to‑output feedback of M2 cancels it in the ratio $v_{\\text{out}}/i_{in}$.\n* Practical reading: the figure illustrates that **biasing the cascode transistor's gate from its own output (instead of from a fixed/diode node) destroys the high output impedance** – a useful \"what‑if\" in a cascode design discussion. To restore the high‑impedance current‑source behaviour, M2's gate should be tied to a fixed bias voltage (or to node X for a diode‑connected variant), in which case $R_{\\text{out}}\\to (1+g_{m1}r_{o1})\\,r_{o2}$.\n\n### Summary of key small‑signal results (as drawn)\n\n| Quantity | Expression | Approx. |\n|---|---|---|\n| $v_{\\text{out}}/i_{in}$ (open output) | $\\dfrac{1+g_{m1}r_{o1}}{g_{m2}(1+g_{m1}r_{o1})+1/r_{o2}}$ | $1/g_{m2}$ |\n| $R_{\\text{out}}$ at $V_{\\text{out}}$ | $\\dfrac{g_{m1}+1/r_{o1}+1/r_{o2}}{g_{m1}g_{m2}+g_{m2}/r_{o1}+1/(r_{o1}r_{o2})}$ | $1/g_{m2}$ |\n| Gain factor of common‑gate M1 (X→out) | $1+g_{m1}r_{o1}$ | — |\n\n**Bottom line:** the circuit is a cascode‑like stage in which M1 is a common‑gate device and M2 is fed back from the output. That feedback makes $V_{\\text{out}}$ a low‑impedance node ($R_{\\text{out}}\\simeq 1/g_{m2}$) rather than the high‑impedance current‑source output one would expect from a correctly biased cascode.",
        "format": "markdown",
        "sha256": "656888462d003b263e0bc3a082d07a736db494670fe93333052d885da996fe5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and derives the expected transimpedance and output resistance of approximately 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1818,
        "output_tokens": 18658,
        "total_tokens": 20476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1818,
        "output_tokens": 18658,
        "total_tokens": 20476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic\n\nLabel the bottom node (common source of the two transistors, top of the two bottom current sources) as **Vx**, and the output node as **Vout**.\n\n| Element | Connection |\n|---|---|\n| $I_1$ | current source, $V_{DD}\\rightarrow V_{out}$ |\n| $M_2$ | drain $=V_{DD}$, **gate $=V_{out}$**, source $=V_x$ |\n| $M_1$ | drain $=V_{out}$, **gate $=V_b$**, source $=V_x$ |\n| $I_{in}$ | current source, ground $\\rightarrow V_x$ (input) |\n| $I_b$ (unlabelled sink) | current source, $V_x\\rightarrow$ ground (bias) |\n\nSo $M_1$ carries the current of $I_1$, $M_2$ is a *gate‑to‑output feedback* transistor, and $V_x$ is the common node that the input current is injected into.\n\n## 2. DC operating point\n\nThe only channel path leaving $V_{out}$ (apart from the ideal $I_1$) is $M_1$ (the gate of $M_2$ draws no DC current, the output is open). Hence\n\n$$I_{D1}=I_1\\qquad\\Rightarrow\\qquad V_{GS1}=V_T+\\sqrt{\\tfrac{2I_1}{k_1}}=\\text{const}$$\n\nand therefore\n\n$$V_x = V_b - V_{GS1} = \\text{constant}$$\n\n**Key result:** $V_x$ is a *virtual ground* (a fixed DC potential set by $I_1$ and $V_b$). It does **not** depend on $I_{in}$ or on $M_2$.\n\nAt $V_x$, KCL gives the DC current of $M_2$:\n\n$$I_{D2}=I_1 + I_{in} - I_b$$\n\nand the output voltage is\n\n$$V_{out}=V_x + V_{GS2}=V_b - V_{GS1}+V_{GS2},\\qquad V_{GS2}=V_T+\\sqrt{\\tfrac{2I_{D2}}{k_2}}$$\n\nSo $V_{out}$ follows $I_{in}$ through the over‑drive of $M_2$. The sink $I_b$ only sets the *bias point* of $M_2$ (i.e. it sets $g_{m2}$ and hence the gain).\n\n## 3. Small‑signal / transresistance gain\n\nBecause $V_x$ is a virtual ground, $v_x\\simeq 0$, and because $M_1$ carries a fixed $I_1$, no AC current flows in $M_1$ ($i_{d1}\\simeq0$). The whole input AC current $i_{in}$ is therefore steered into the source of $M_2$:\n\n$$i_{d2}\\simeq -\\,i_{in}$$\n\nWith the source of $M_2$ at the virtual ground and its gate at $V_{out}$,\n\n$$i_{d2}=g_{m2}\\,v_{gs2}=g_{m2}\\,v_{out}$$\n\nHence\n\n$$\\boxed{\\dfrac{v_{out}}{i_{in}} = -\\dfrac{1}{g_{m2}}}\\qquad\\Longrightarrow\\qquad R_{out}\\equiv \\left|\\dfrac{V_{out}}{I_{in}}\\right|=\\dfrac{1}{g_{m2}}$$\n\nThis result is **exact** (the sign only reflects current direction) as long as $M_2$ is treated as ideal ($r_{o2}\\to\\infty$); it is independent of $M_1$'s $r_{o1}$. A finite $r_{o2}$ adds only a tiny correction $\\big(1-1/(g_{m1}g_{m2}r_{o1}r_{o2})\\big)$, and body‑effect/mismatch add second‑order errors.\n\nEquivalently, from the DC equation $v_{out}=v_{gs2}$ and $g_{m2}=dI_{D2}/dV_{GS2}$, $dv_{out}=di_{D2}/g_{m2}=di_{in}/g_{m2}$ — same answer.\n\n## 4. Input and output impedance\n\n* **Input (at $V_x$):** $V_x$ is held at a fixed potential by the $I_1$–$M_1$ branch, so the node is a low‑impedance **virtual ground**. This is exactly what a current input wants — the input current is fully absorbed and converted, with minimal voltage disturbance.\n* **Output (at $V_{out}$):** the node connects to the *gate* of $M_2$ (infinite impedance) in parallel with the *drain* of $M_1$. $M_1$'s gate and source are both AC‑grounded, so it presents $r_{o1}$ to ground; thus $R_{out}\\approx r_{o1}$ (further raised by the bootstrapping action of $M_2$), i.e. a **moderate‑to‑high** output resistance.\n\n## 5. Function and role of each part\n\nThe circuit is a **current‑to‑voltage converter (transresistance / transimpedance amplifier)** with\n\n$$R_{out}\\approx \\dfrac{1}{g_{m2}}$$\n\na low‑impedance (virtual‑ground) input, and a relatively high‑impedance output.\n\n* $I_1$ + $M_1$ + $V_b$ → create and hold the virtual ground at $V_x$ (set $V_{GS1}$, fix $V_x$).\n* $I_b$ → bias $M_2$, setting $g_{m2}$ and therefore the gain.\n* $M_2$ (gate tied to $V_{out}$) → the feedback transconductor that turns the input current (flowing through it) into the output voltage $v_{out}=i_{in}/g_{m2}$.\n* $I_{in}$ → the input current being converted.\n\n**Assumptions:** both transistors in saturation, ideal current sources, body effect neglected for the main result; $r_{o1},r_{o2}$ retained only for the higher‑order corrections.",
        "format": "markdown",
        "sha256": "a61f3ed51ea219fe30731ac0eed10bf7ce30fa3aa47b1a44a50d590f968063c5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It reaches the nominal vout/iin ≈ 1/gm2 result and recognizes M2 as a feedback device, but misreads the upper PMOS as an NMOS with its source and drain at the wrong nodes. It also incorrectly treats Vx as an exact virtual ground and gives contradictory output-resistance claims. The golden solution’s device-type rule limits this kind of answer to 1.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1818,
        "output_tokens": 21115,
        "total_tokens": 22933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1818,
        "output_tokens": 21115,
        "total_tokens": 22933,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 19654,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – the circuit does not stop oscillating.** Making the three load capacitors $C_L$ very large only *slows down* the oscillation; it does not turn it off.\n\n**Why.** This is a 3‑stage ring oscillator. Each inverter, when its input crosses the threshold, eventually drives its output to the opposite rail (the input swing is rail‑to‑rail, so every stage fully switches regardless of how slowly the node changes). The signal therefore keeps circulating and being inverted, which is exactly the oscillation mechanism. The capacitors are just the load that each stage must charge/discharge, so they set the *propagation delay* per stage:\n\n$$t_{pd} \\approx 0.69\\,R_{on}C_L$$\n\nand hence the frequency\n\n$$f_{osc} \\approx \\frac{1}{2\\cdot 3\\cdot t_{pd}} = \\frac{1}{6\\,t_{pd}} \\propto \\frac{1}{C_L}$$\n\nSo as $C_L \\to \\infty$, $f_{osc} \\to 0$ (the period grows without bound), but for any *finite*, however large, $C_L$ the loop still has a non‑zero oscillation frequency.\n\nYou can see the same thing from the linear (Barkhausen) model. With each stage as a single‑pole inverter $H(s)=-A/(1+s/\\omega_p)$, $\\omega_p=1/(R_{on}C_L)$, the loop is $L(s)=[H(s)]^3$. The phase crosses $0^\\circ$ at $\\omega=\\sqrt{3}\\,\\omega_p$, and at that frequency $|L|=A^3/8$. This magnitude **does not depend on $C_L$** (i.e. on $\\omega_p$) – it depends only on the inverter gain $A$. The oscillation condition $|L|\\ge 1$ (i.e. $A\\ge 2$) is therefore either met or not met *independently of* the capacitor value. Increasing $C_L$ merely moves the crossing frequency down; it never degrades the loop gain below the threshold.\n\n**Caveat on the wording.** In the strict mathematical limit $C_L\\to\\infty$ the period becomes infinite, so the waveform freezes (a zero‑frequency \"oscillation\"). But \"arbitrarily large\" in practice means large but finite, and in that case the ring oscillates perfectly well – just at a much lower frequency. The capacitors alone cannot make the ring fail to oscillate.",
        "format": "markdown",
        "sha256": "bf4a7a3af7847a967f16179093e7cc8a62492a7526b8e07f017a3b398f836d97"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without stopping oscillation, supported by both the delay scaling and a small-signal phase/gain argument. The infinite-capacitance caveat is consistent with the claim for arbitrarily large finite capacitances.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1855,
        "output_tokens": 4228,
        "total_tokens": 6083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1855,
        "output_tokens": 4228,
        "total_tokens": 6083,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: No.** Making the three $C_L$ arbitrarily large does *not* stop the circuit from oscillating; it only makes the oscillation slower (the frequency tends to zero as $C_L \\to \\infty$). For every *finite* value of $C_L$ the loop still satisfies the oscillation conditions.\n\n**Why**\n\nThe figure is a 3‑inverter ring oscillator. Each node (output of an inverter = input of the next, with the last node fed back to the first) is loaded by a shunt capacitor $C_L$ to ground.\n\nEach inverter plus its load can be written as an inverting first‑order stage\n\n$$H(s) = \\frac{-G}{1 + s/\\omega_p}, \\qquad \\omega_p \\propto \\frac{1}{C_L}$$\n\nwhere $G$ is the (low‑frequency) voltage gain of the inverter, which is set by the transistors and is **independent of $C_L$**.\n\nThe ring's characteristic equation is $H(s)^3 = 1$. Writing $H(j\\omega)=|H|e^{j\\phi}$ with $\\phi = \\pi - \\arctan(\\omega/\\omega_p)$, the phase condition $3\\phi = 2\\pi$ is met when\n\n$$\\arctan\\!\\left(\\frac{\\omega_{osc}}{\\omega_p}\\right) = \\frac{\\pi}{3} \\;\\Rightarrow\\; \\omega_{osc} = \\sqrt{3}\\,\\omega_p \\propto \\frac{1}{C_L}.$$\n\nAt that frequency $|H| = G/\\sqrt{1+3} = G/2$, so the loop‑gain magnitude at the phase‑crossover is $(G/2)^3$ — a number that does **not** depend on $C_L$ at all. (Equivalently, the impedance presented by the load capacitor at the oscillation frequency is $1/(\\omega_{osc}C_L) = R/\\sqrt{3}$, a constant.)\n\nHence the gain and phase conditions that let the circuit start oscillating at one value of $C_L$ hold identically at every other value. Increasing $C_L$ merely pushes $\\omega_p$ (and therefore $\\omega_{osc}$) down, i.e.\n\n$$f_{osc} \\approx \\frac{1}{2\\,N\\,t_{pd}}, \\qquad t_{pd}\\propto C_L \\;\\Rightarrow\\; f_{osc}\\propto \\frac{1}{C_L},$$\n\nso the waveform simply stretches in time. The capacitors only add delay; they never reduce the inverter's gain, so there is no threshold capacitance at which oscillation ceases.\n\n**Conclusion:** The circuit keeps oscillating for any finite $C_L$, however large; in the degenerate limit $C_L \\to \\infty$ the frequency approaches zero, but the circuit does not \"fail to oscillate.\" (The only way it would not oscillate is if the inverter gain itself were too small, e.g. $G<2$ in this model — and that is unrelated to $C_L$.)",
        "format": "markdown",
        "sha256": "e158fb393984e239ef115403b707b14616cd84de3cdf28e3a1f1470bf46813e8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without stopping oscillation, and supports this with a small-signal phase and gain analysis showing the oscillation condition is independent of capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1855,
        "output_tokens": 6549,
        "total_tokens": 8404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1855,
        "output_tokens": 6549,
        "total_tokens": 8404,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5862,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – it does not fail to oscillate.** Making the three load capacitors larger only makes the oscillator *slower*; the oscillation condition itself is untouched by the value of $C_L$.\n\n**What $C_L$ does.** Each inverter must charge and discharge the $C_L$ sitting on the next stage's input node, so the propagation delay of one stage scales with the load, $t_{pd}\\propto C_L$. A ring oscillator runs at roughly\n\n$$f_{osc}\\approx \\frac{1}{2N\\,t_{pd}}=\\frac{1}{6\\,t_{pd}}\\propto \\frac{1}{C_L}.$$\n\nSo as $C_L\\to\\infty$, $f_{osc}\\to 0$. The waveform period grows without bound, but for any *finite* $C_L$ the inverter (a push‑pull source/sink) will still eventually drive its output node to the opposite rail, so the slow \"chase\" around the loop continues.\n\n**Why the oscillation condition survives.** The oscillation is sustained by the *odd* number of inverting stages, which guarantees the required 180° of loop phase shift; $C_L$ does not change the number of sign inversions nor the feedback path (the top wire is a short at all frequencies, and the capacitors are shunt loads, not part of the feedback). In a small‑signal model of one stage, $H(s)=\\dfrac{A_0}{1+s/\\omega_p}$ with $A_0=-g_mr_{out}$ and $\\omega_p=1/(r_{out}C_L)$. The loop is $L(j\\omega)=[H(j\\omega)]^3$, which is a positive real number when $\\omega=\\sqrt{3}\\,\\omega_p$, and at that frequency\n\n$$|L|=\\frac{|A_0|^3}{8},$$\n\nwhich **does not contain $C_L$**. Hence the gain‑margin condition $|A_0|\\ge 2$ is satisfied independently of how large $C_L$ is; $C_L$ merely sets *where* (at which $\\omega$) the phase condition is met, pushing that frequency down as $1/C_L$.\n\n**Conclusion.** For arbitrarily large but finite $C_L$, the circuit still oscillates — it just does so at an arbitrarily low frequency. It only \"stops\" in the degenerate mathematical limit $C_L=\\infty$, where the period (and the time between any two transitions) becomes infinite, i.e. $f_{osc}=0$. So the correct answer to the question as posed is **no**: the capacitors degrade the *frequency*, not the *ability to oscillate*.",
        "format": "markdown",
        "sha256": "03c44e7f7dac3462e4f53fa3b8ee18553b8c4b0d87875ddbd41798ba82cc790e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that all three capacitors slow the ring without eliminating oscillation, and supports this with both delay scaling and a valid small-signal phase/gain argument. The frequency tends toward zero as finite capacitances grow; the infinite-capacitance limit does not undermine the answer.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1855,
        "output_tokens": 6704,
        "total_tokens": 8559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1855,
        "output_tokens": 6704,
        "total_tokens": 8559,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6118,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Circuit\n\nThe figure is a 3‑stage ring oscillator (odd number of inverters → oscillates), each node loaded by a capacitor $C_L$.\n\n## What changes when $C_L \\to 2C_L$ (device sizes kept fixed)\n\n* **Oscillation frequency:** the stage delay $t_{pd}\\propto R_{on}C_L$, so the period $T=2Nt_{pd}$ doubles and\n\n$$f_{osc} \\to \\frac{f_{osc}}{2}$$\n\n* **Power:** $P=\\tfrac12(3C_L)V_{DD}^2 f_{osc}$ is unchanged (capacitance ×2, frequency ÷2).\n\n## Phase noise\n\nFor a ring oscillator the close‑in (1/f²) phase noise can be written as\n\n$$L(f_m) \\;=\\; \\frac{2\\,S_i\\,R_{on}^2}{V_{DD}^2}\\left(\\frac{f_{osc}}{f_m}\\right)^2$$\n\nwhere $S_i$ is the inverter's equivalent noise‑current density and $R_{on}$ the on‑resistance. **The bracketed coefficient contains no $C_L$** – all the $C_L$ dependence is hidden in $f_{osc}$. (Equivalently, $L(f_m)=\\tfrac12\\,S_i\\,\\omega_0^2/(\\omega_m^2 C_L^2\\,S_{lope}^2)$ with $S_{lope}\\propto 1/C_L$, so $C_L$ cancels in the slope term and only $f_{osc}^2$ remains.)\n\nTherefore:\n\n* **At a fixed *absolute* offset** (e.g. L(100 kHz), the usual spec): $L\\propto f_{osc}^2\\propto 1/C_L^2$, so doubling $C_L$ makes $f_{osc}$ half and\n\n$$L \\to \\frac{L}{4}\\quad\\Rightarrow\\quad \\mathbf{-6\\ dB\\ (4\\times\\ improvement)}$$\n\n* **At a fixed *fractional* offset** ($f_m = \\alpha\\, f_{osc}$): the $(f_{osc}/f_m)^2$ ratio is unchanged, so the phase noise **stays the same** (the 6 dB gain in the coefficient is exactly cancelled by the lower $f_{osc}$).\n\nThe time jitter (seconds) is unchanged; the *phase* jitter (radians) improves because the carrier frequency is lower.\n\n**Bottom line:** with the same inverters, doubling the three load capacitors halves the oscillation frequency and, measured at any fixed absolute offset frequency, lowers the phase noise by **6 dB** (factor of 4). If you normalise the offset to the new oscillation frequency, the phase noise is unchanged.",
        "format": "markdown",
        "sha256": "07b577d59d560b9f7cc3fee027b2ed7ffafdccfe2fd857b93dcf0b3d7dcfd65a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at fixed absolute offset, while it is unchanged at fixed relative offset. The reasoning matches the golden solution.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1853,
        "output_tokens": 13635,
        "total_tokens": 15488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13005,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1853,
        "output_tokens": 13635,
        "total_tokens": 15488,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13005,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the phase noise gets better (decreases).**\n\n**Why**\n\nThe circuit is a 3‑stage ring oscillator. Each inverting stage drives a capacitive load $C_L$ through its output resistance $R$, so the delay per stage is $t_p \\propto R C_L$ and the oscillation frequency is\n\n$$f_0 = \\frac{1}{2N t_p} \\propto \\frac{1}{C_L}\\quad\\Rightarrow\\quad C_L \\to 2C_L \\;\\; \\Rightarrow\\;\\; f_0 \\to f_0/2 .$$\n\nNow look at the two regions of the phase‑noise plot (Leeson's model, with the loaded $Q=\\omega_0 R C_L=\\sqrt{3}$ fixed by the oscillation condition and the signal power $P_s=V_{rms}^2/R$ independent of $C_L$):\n\n* **Close‑in, $1/f^2$ region:**\n$$L(\\Delta f)\\big|_{1/f^2} = \\frac{F k T}{2P_s}\\left(\\frac{f_0}{2Q\\,\\Delta f}\\right)^2 \\propto f_0^2 \\propto \\frac{1}{C_L^2}.$$\nHalving $f_0$ (doubling $C_L$) cuts this term by a factor of 4, i.e. **≈ 6 dB improvement** at any fixed absolute offset $\\Delta f$. (Equivalently, the slower edges make the *relative* timing jitter smaller and the larger capacitors store more energy per cycle, so the same noise current perturbs the phase less.)\n\n* **Far‑out, white‑noise floor:** $L_{white}\\propto FkT/(2P_s)$, and $P_s$ is unchanged, so the floor is **essentially unchanged** (only the corner frequency $\\omega_0/2Q$ moves down by 2×).\n\n**Net effect:** the close‑in ($1/f^2$) phase noise drops by about 6 dB (factor of 4), the white floor stays the same, and the overall phase noise of the oscillator is reduced. (If the offset were instead specified as a fixed *fraction* of $f_0$, the $1/f^2$ term would be unchanged; the 6 dB gain applies for a fixed absolute offset, which is the usual specification.)",
        "format": "markdown",
        "sha256": "3925f98a875a613b7b5a10810ad675aab253d307746e734d111c0403ff4502cb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly derives that doubling the load capacitances halves the oscillation frequency and gives a fourfold (about 6 dB) reduction at fixed absolute offset, matching the full-credit rule. The relative-offset caveat is also correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1853,
        "output_tokens": 13342,
        "total_tokens": 15195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1853,
        "output_tokens": 13342,
        "total_tokens": 15195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12814,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** The phase noise *improves (drops) by 3 dB* (a factor of 2 in power), and the oscillation frequency is halved.\n\n**Why**\n\nThis is a 3‑stage RC (relaxation / phase‑shift) oscillator: the only frequency‑setting elements are the three load capacitors, each of which is charged/discharged through the (implicit) output resistance *R* of the inverting stage, so the timing slope of each node is\n\n$$\\frac{dV}{dt}\\approx \\frac{V}{R}\\qquad(\\text{independent of }C_L).$$\n\nThe thermal noise that sets the timing uncertainty is the noise stored on the capacitor. By equipartition its mean‑square value is\n\n$$\\langle v_n^2\\rangle = \\frac{kT}{C_L}\\quad(\\text{noise energy } \\tfrac{1}{2}C_L\\langle v_n^2\\rangle = \\tfrac{kT}{2},\\ \\text{independent of }C_L).$$\n\nThe phase (time) error is the noise voltage divided by the slope, so the phase noise scales as\n\n$$L(f) \\propto \\frac{\\langle v_n^2\\rangle}{(dV/dt)^2} \\propto \\frac{1/C_L}{1} \\propto \\frac{1}{C_L}.$$\n\nEquivalently, the signal energy in the capacitor is $\\tfrac12 C_L V^2 \\propto C_L$ while the noise energy $kT$ is fixed, so the resonator SNR $\\propto C_L$ and the phase noise $\\propto 1/C_L$.\n\nTherefore doubling all three $C_L$:\n\n* halves the oscillation frequency ($f_0 \\propto 1/C_L$), and\n* halves the phase‑noise power → **3 dB improvement** in $L(f)$ at any given offset.\n\n(If you keep the *center frequency* fixed by also halving the resistances, the phase noise would not change — but with $R$ fixed, as in the figure, the net effect is the 3 dB improvement above.)",
        "format": "markdown",
        "sha256": "dad500cefb772f5b6960114e092d99208b51785105b49fa96483e7d473258c3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly says the oscillation frequency halves and phase noise decreases, but gives a 3 dB reduction instead of the required 6 dB (factor of four) at a fixed offset. The golden solution caps a wrong magnitude such as 3 dB at 2.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1853,
        "output_tokens": 26415,
        "total_tokens": 28268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1853,
        "output_tokens": 26415,
        "total_tokens": 28268,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25943,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No.** The circuit will keep oscillating no matter how large $C_L$ is made (for any *finite* value); $C_L$ only makes it oscillate more slowly.\n\nWhy:\n\n- The figure is a **3‑inverter ring oscillator** (each triangle has a bubble = inverting buffer; the top wire feeds the last output back to the first input). An odd number of inverting stages gives the positive‑feedback‑with‑delay needed to oscillate, and $C_L$ does not change that parity or break the loop.\n- $C_L$ is simply a **load** on the node between inverter 1 and inverter 2. Making it larger forces inverter 1 to charge/discharge more charge, so the propagation delay at that node, $t_{pd1}$, increases. Since the period is $T = 2(t_{pd1}+t_{pd2}+t_{pd3})$, the oscillation frequency $f_{osc}=1/T$ simply **drops**. The waveform at that node becomes a slower ramp, but it still crosses the next inverter's threshold, so the signal keeps circulating.\n- A useful way to see it isn't \"shorted out\": when $C_L$ is large the period is set by that node's $RC$ time constant, so $T \\propto R\\,C_L$ and $f_{osc}\\propto 1/C_L$. The capacitive reactance *at the oscillation frequency* is then $1/(\\omega_{osc}C_L) \\approx R$ — a constant, equal to the inverter's output resistance. So the node still swings through a finite amplitude; the capacitor just slows the clock to match.\n\nThe only limit in which it would stop is the unphysical $C_L \\to \\infty$, where $T \\to \\infty$ (i.e. $f_{osc}\\to 0$). For any realistic, finite $C_L$, however large, the ring still oscillates — just at a lower frequency.\n\n**Answer: No, it does not fail to oscillate; $C_L$ merely lowers the oscillation frequency (increases the period).**",
        "format": "markdown",
        "sha256": "9891e4557e9e22bafd89d2089dcf712460dbd96907e40634534687c878e00195"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: a sufficiently large load on one node can create a dominant pole and make the loop fail the Barkhausen condition. It correctly recognizes the ring and that loading slows the node, but incorrectly assumes oscillation persists for every finite capacitance.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1760,
        "output_tokens": 4636,
        "total_tokens": 6396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1760,
        "output_tokens": 4636,
        "total_tokens": 6396,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4167,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Yes – in the limit of arbitrarily large $C_L$ the ring stops oscillating and settles to a metastable DC point.**\n\n**Why a 3‑inverter ring oscillates in the first place.**\nThe loop has an odd number of inversions, so at DC the phase around the loop is 180°. Oscillation requires the frequency‑dependent poles at the inverter outputs to add another 180° *while the loop gain is still ≥ 1*. This is satisfied only when the node capacitances (hence the pole frequencies) are of comparable size, so that the phase accumulates gradually as the signal makes one lap.\n\n**What happens when $C_L$ → ∞ at a single node.**\nThat node's pole $\\omega_L = 1/(R C_L)$ becomes the dominant (slow) pole, and the other two nodes are now much faster.\n\n*Time‑domain view:* Look at the slow node. The two fast inverters between it and its own driving source form a *two‑inversion* (non‑inverting) path. Therefore the Thevenin drive on $C_L$ has the opposite sign to the node voltage: if the node rises above the switching threshold the drive is pulled low, and if it falls below, the drive is pulled high. That is **negative feedback** on the slow node, so it is pushed back to the threshold and held there. Linearizing the three‑state system gives a state matrix whose eigenvalues are all real and negative (the equilibrium is stable), so no limit cycle can grow.\n\n*Frequency‑domain (Barkhausen) view:* At the frequency where $|L(j\\omega)| = 1$, the dominant pole has already rolled off (≈ 90° lag) while the two fast poles contribute ≈ 0°, so the *extra* phase is only ≈ 90° – far short of the required 180°. Conversely, at the frequency where the extra phase is 180°, the dominant pole's magnitude is $\\approx \\omega_L/\\omega \\ll 1$, so $|L| < 1$. The two Barkhausen conditions can never be met simultaneously.\n\n**Conclusion.** For moderate $C_L$ the circuit still oscillates (with a falling frequency), but there is a finite ratio $C_L/C_{\\text{other}}$ beyond which oscillation is lost; pushing $C_L$ to be arbitrarily large puts you well past that threshold. Hence the circuit **fails to oscillate** when $C_L$ is made arbitrarily large.",
        "format": "markdown",
        "sha256": "4b1d4038ce2e46853b1f503f7e002f502706974eacd9e02fffa99a3a79b55794"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node can stop oscillation, and explains the dominant-pole roll-off and failure to satisfy Barkhausen conditions. The time-domain settling explanation is also consistent with the golden solution; extra phase and stability details are not required.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1760,
        "output_tokens": 15104,
        "total_tokens": 16864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1760,
        "output_tokens": 15104,
        "total_tokens": 16864,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14562,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – it does not stop oscillating.**\n\n**What the circuit is.** The three triangles with bubbles are CMOS inverters connected in a closed loop (the top wire feeds the output of the third inverter back to the input of the first). An odd number of inverters in a ring gives a feedback loop whose DC operating point is unstable, so the circuit is a **ring oscillator**. Oscillation is sustained by the *propagation delays* of the inverters themselves, not by any external timing element; the period is roughly $T \\approx 2\\sum t_{pd}$ (here $2(t_{p1}+t_{p2}+t_{p3})$).\n\n**What $C_L$ does.** $C_L$ is a shunt load at the node between inverter 1 and inverter 2. Inverter 1 must charge/discharge this extra capacitance through its finite output resistance, so the propagation delay of *that* stage grows (approximately $t_{p1} \\propto C_L$ in the linear‑charging region). The consequence is purely that the **oscillation frequency falls** as $C_L$ increases:\n$$f_{osc} = \\frac{1}{2(t_{p1}+t_{p2}+t_{p3})} \\;\\xrightarrow[C_L\\to\\infty]{}\\; 0.$$\n\n**Why it never stops.** Two facts guarantee continued oscillation for *any* finite $C_L$:\n\n1. **DC gain is unaffected by $C_L$.** The small‑signal gain of an inverter in its transition region (and the fact that the loop has no stable DC equilibrium) does not depend on the load capacitance – $C_L$ only adds poles, i.e. delay. So the loop gain around the ring stays $>1$.\n2. **Delay can only help a ring oscillator.** Oscillation requires *non‑zero* loop delay; adding $C_L$ increases the delay rather than removing it. The low‑frequency pole introduced by $C_L$ and the oscillation frequency scale together, so the Barkhausen phase/gain condition is still met, just at a lower frequency.\n\nThe only ways to make a ring oscillator quit are to break the loop, to reduce the loop gain below unity, or to make the inverter delays vanish (ideal gates) – none of which a large shunt capacitor does.\n\nTherefore, as $C_L \\to \\infty$ the output simply becomes an ever slower square wave (period $\\to \\infty$), but the circuit **does not fail to oscillate**.",
        "format": "markdown",
        "sha256": "484cd6d41a85aa4627d59087b20874729f7b1627fc5e128875c7c3d1467ee88e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: a sufficiently large load on one node can create a dominant pole and prevent oscillation by violating the loop gain/phase condition. It correctly notes that the load increases delay, but incorrectly assumes delay alone guarantees oscillation and that the loop gain remains adequate.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1760,
        "output_tokens": 4647,
        "total_tokens": 6407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1760,
        "output_tokens": 4647,
        "total_tokens": 6407,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4094,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** The single‑sideband phase noise at a given offset frequency **decreases by a factor of 2 (≈ 3 dB improvement)**, while the oscillation frequency stays essentially the same.\n\n**Why (3‑stage ring oscillator shown):**\n\nWhen *both* the NMOS and PMOS widths are doubled (same *L*, same $V_{DD}$):\n\n| Quantity | Scaling |\n|---|---|\n| Transconductance $g_m$ | $\\propto W \\Rightarrow \\times 2$ |\n| Drive current $I_{drive}$ (sets the node slope) | $\\propto W \\Rightarrow \\times 2$ |\n| Node capacitance $C$ (gate + diffusion caps of the connected devices) | $\\propto W \\Rightarrow \\times 2$ |\n| Inverter delay $\\tau \\sim C\\,V_{DD}/I_{drive}$ | **unchanged** |\n| Oscillation frequency $f_0 = 1/(2N\\tau)$ | **unchanged** |\n| Zero‑crossing slope $m = I_{drive}/C$ | **unchanged** |\n| Node noise‑voltage PSD $S_v = 4kT\\gamma g_m/(g_m^2+\\omega_m^2 C^2)$ | $\\propto 1/W \\Rightarrow \\times \\tfrac12$ |\n\nThe phase is set by the zero‑crossing times, so $S_\\phi(\\omega_m) = (\\omega_0/m)^2 S_v(\\omega_m)$. Both $\\omega_0$ and $m$ are unchanged, so $S_\\phi$ follows $S_v$ and is **halved**. Equivalently, the FOM $= 3 + 10\\log_{10}\\!\\big(1/(2I_{DD}/V_{DD})\\big)$ improves by 3 dB (here $I_{DD}\\propto C\\,f_0$ doubles), and since $f_0$ does not change, $L(f_m)$ improves by the same 3 dB.\n\n**Caveats**\n* This is the thermal‑noise (white / $1/f_m^2$) result. Flicker noise in the $1/f_m^3$ corner scales differently.\n* If one *artificially* held the node capacitance fixed (i.e., ignored that the load is the next stage's gate, which also doubles), the delay would halve, $f_0$ would double, and $L(f_m)$ at a fixed offset would instead drop by ≈ 9 dB. With the self‑consistent scaling of the parasitics, the correct figure is **3 dB better**.\n\nSo, doubling the device widths makes the oscillator **quieter by 3 dB** at the cost of roughly doubling the supply current.",
        "format": "markdown",
        "sha256": "d48bcfe6a083d870ae41b5bbb907887091d40b82d1be27dc724a89eb9b6b3bcf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and explains it through the proportional scaling of drive current and node capacitance, with frequency roughly unchanged. Minor caveats or extra FOM discussion do not undermine the essential result.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2784,
        "output_tokens": 15071,
        "total_tokens": 17855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2784,
        "output_tokens": 15071,
        "total_tokens": 17855,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14460,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the phase noise drops by a factor of 2, i.e. it improves by 3 dB** (the oscillation frequency stays the same, but the power consumption doubles).\n\n**Why**\n\nThe circuit is a 3‑stage CMOS ring oscillator. Because *both* the NMOS and PMOS widths are scaled by the same factor, the W_P/W_N ratio is unchanged, so the bias points (the voltage waveforms at every node) are unchanged. With the over‑drive voltages fixed, every width‑proportional quantity scales linearly with W:\n\n* DC supply current per stage, I_DC ∝ W\n* Transconductance, g_m ∝ W  →  channel‑noise PSD i_n² = 4kTγg_m ∝ W\n* Parasitic capacitance per node, C ∝ W (and the 1/f noise PSD ∝ I_DC²/W ∝ W as well)\n\nThe oscillation frequency is set by the stage delay τ ∝ C/g_m. Since C and g_m scale together, τ (and therefore f_osc) is **unchanged**.\n\nPhase noise is a power quantity equal to the noise‑to‑signal ratio, L(f_m) ∝ i_n² / I_DC² ∝ W / W² = **1/W**. (Equivalently, the effective \"Q\" of the ring scales as √W, so L ∝ 1/Q² ∝ 1/W.)\n\nHence doubling W:\n\n* halves the white (1/f²) phase noise → **–3 dB**\n* halves the flicker (1/f) phase noise by the same factor, so the 1/f corner in offset frequency does **not** move\n* leaves f_osc unchanged\n* doubles the supply current / power\n\nSo the price for a 3 dB phase‑noise improvement is 2× power dissipation — the classic ring‑oscillator scaling trade‑off.",
        "format": "markdown",
        "sha256": "ff12b20d7a42665cf4c3fcd9dd13510b5b6ed024b453170db21f98b6c51960d8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB phase-noise reduction and supports it with valid width-scaling reasoning: device noise power grows with width while signal power grows with its square. The frequency and power trends are also consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2784,
        "output_tokens": 8765,
        "total_tokens": 11549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2784,
        "output_tokens": 8765,
        "total_tokens": 11549,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8347,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the phase noise is reduced by 3 dB (it improves by a factor of 2).**\n\n**Why**\n\nThe circuit is a 3‑stage ring oscillator, so each inverter's output node is loaded mainly by the gate capacitance of the *next* inverter. When you double both the NMOS and PMOS widths:\n\n* The drive current of each device doubles (for the same bias, $I_D \\propto W$), and $g_m$ doubles too.\n* The node (load) capacitance also doubles, because the next stage's input capacitance is proportional to $W$ ($C \\propto W$).\n\nHence the slew rate $S = I_D/C$ and the oscillation frequency $f_{osc} \\propto 1/(R_{eq}C) \\propto (1/W)(W)$ are **unchanged**.\n\nThe phase noise (white‑noise region) of a ring oscillator can be written as\n\n$$L(f) \\;=\\; \\frac{1}{2N}\\,\\frac{\\gamma\\,kT}{C\\,V_{OV}^{2}}\\left(\\frac{f_{osc}}{f}\\right)^{2}$$\n\nwith $V_{OV}$ and $f_{osc}$ fixed and $C$ doubled, so $L(f)$ is halved.\n\nEquivalently, in jitter terms: the noise current at the node scales as $\\sqrt{g_m}\\propto\\sqrt{W}$ while the node impedance $1/(\\omega C)\\propto 1/W$, so the noise *voltage* scales as $1/\\sqrt{W}$; combined with the unchanged slew rate this gives a timing‑jitter variance $\\sigma_t^2 \\propto C/I_D^2 \\propto 1/W$, i.e. a factor‑of‑2 reduction in variance → 3 dB lower phase noise. (The flicker‑noise contribution scales the same way, $\\propto 1/C$, so the entire noise curve shifts down by 3 dB.)\n\nSo doubling the device widths **decreases the phase noise by 3 dB**.",
        "format": "markdown",
        "sha256": "441569103b0242e78175d818686188385fdbc045d751cdd4cce71659d0f0bcaf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that doubling the widths reduces phase noise by about 3 dB. Its scaling argument preserves frequency while halving the noise-to-signal ratio, matching the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2784,
        "output_tokens": 14940,
        "total_tokens": 17724,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14479,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2784,
        "output_tokens": 14940,
        "total_tokens": 17724,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14479,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Small‑signal model of one stage\n\nAt the bias point of an oscillating ring oscillator each inverter is in its linear region (both devices in saturation). The small‑signal parameters of one inverter are $g_{m_n},g_{m_p},r_{o_n},r_{o_p}$, with output resistance $R=r_{o_n}\\parallel r_{o_p}$.\n\nWith $v_s$ = small‑signal voltage at the supply node $S$, $v_{in,i}=x_i$ the gate voltage and $v_{out,i}$ the output of stage $i$ (the gate of the next stage, so $v_{out,i}=x_{i+1}$), KCL at the output node gives\n\n$$\\left(\\tfrac{1}{r_{o_n}}+\\tfrac{1}{r_{o_p}}\\right)v_{out,i}+(g_{m_n}+g_{m_p})x_i=\\left(g_{m_p}+\\tfrac{1}{r_{o_p}}\\right)v_s$$\n\nDefine $a=(g_{m_n}+g_{m_p})R$ (inverter gain magnitude) and $C=(g_{m_p}+1/r_{o_p})R$. Then\n\n$$x_{i+1}=-a\\,x_i+C\\,v_s$$\n\n## Solving the 3‑stage loop\n\nAdding the three cyclic equations eliminates the individual $x_i$:\n\n$$(1+a)(x_1+x_2+x_3)=3C\\,v_s\\quad\\Rightarrow\\quad S\\equiv\\sum x_i=\\frac{3C}{1+a}\\,v_s$$\n\nThe current drawn from the supply node equals the sum of the NMOS drain currents (the PMOS source currents), so\n\n$$I_S=\\sum_i\\left(g_{m_n}x_i+\\frac{x_{i+1}}{r_{o_n}}\\right)=\\left(g_{m_n}+\\frac{1}{r_{o_n}}\\right)S=\\frac{3C\\left(g_{m_n}+\\tfrac{1}{r_{o_n}}\\right)}{1+a}\\,v_s$$\n\n## Result\n\n$$\\boxed{R_x=\\frac{v_s}{I_S}=\\frac{1+a}{3\\,R\\left(g_{m_n}+\\tfrac{1}{r_{o_n}}\\right)\\left(g_{m_p}+\\tfrac{1}{r_{o_p}}\\right)}=\\frac{1+A}{3\\,R_{out}\\left(g_{m_n}+\\tfrac{1}{r_{o_n}}\\right)\\left(g_{m_p}+\\tfrac{1}{r_{o_p}}\\right)}}$$\n\nwhere $A=g_m R_{out}$ is the inverter voltage gain.\n\n**Usual approximation** ($g_m r_o\\gg1$, i.e. $g_m\\gg1/r_o$): the $1/r_o$ terms drop out and $1+a\\approx a=g_m R_{out}$, giving a compact result independent of $r_o$:\n\n$$\\boxed{R_x \\approx \\frac{g_{m_n}+g_{m_p}}{3\\,g_{m_n}g_{m_p}}=\\frac{1}{3}\\left(\\frac{1}{g_{m_n}}+\\frac{1}{g_{m_p}}\\right)}$$\n\nFor a **symmetric** inverter ($g_{m_n}=g_{m_p}=g_m$):\n\n$$R_x \\approx \\frac{2}{3\\,g_m}$$\n\n**Interpretation:** because the three‑stage loop is at the edge of oscillation, the supply perturbation is positively fed back around the ring, increasing the input‑node swings ($S\\approx\\tfrac{3}{2}v_s$ for a matched stage) and therefore the current pulled from the rail. Hence the oscillator presents a *low* impedance to its supply, on the order of $1/g_m$, much smaller than the inverter output resistance $R_{out}$.",
        "format": "markdown",
        "sha256": "61b8bcbcac3ebec71ce0e5aab9640ef55558c5f7552a9fd4364345958be10faa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives the static gm-based resistance, but misses the dominant oscillation-driven charging and discharging of the node capacitances. The golden solution explicitly assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2675,
        "output_tokens": 12774,
        "total_tokens": 15449,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2675,
        "output_tokens": 12774,
        "total_tokens": 15449,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11882,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Setting up the small‑signal model\n\nLinearize each inverter about its symmetric (linear) operating point, $v_{in}=v_{out}=V_M$, where both devices are in saturation. Let the supply node voltage be the test voltage $v_x$, ground be $0$, and let $v_i$ and $v_o$ be the small‑signal input and output of one inverter. (Gate currents are zero, capacitors are open for the low‑frequency incremental resistance.)\n\n**Currents of one inverter**\n\nPMOS (source at $v_x$, gate at $v_i$, drain at $v_o$) – current from the supply node into the PMOS:\n$$i_P = g_{mp}(v_x-v_i)+\\frac{v_x-v_o}{r_{op}}$$\n\nNMOS (source at 0, gate at $v_i$, drain at $v_o$) – current out of the output node:\n$$i_N = g_{mn}\\,v_i+\\frac{v_o}{r_{on}}$$\n\n**Output‑node KCL** ($i_P=i_N$; the next gate draws no current) gives\n$$v_o = K\\,v_x - G\\,v_i$$\nwith $R_o=r_{on}\\parallel r_{op}$,\n$$G=(g_{mn}+g_{mp})R_o,\\qquad K=\\left(g_{mp}+\\tfrac{1}{r_{op}}\\right)R_o .$$\n\n## Using the ring feedback\n\nThe three inverters form a ring, $v_{o,1}=v_{i,2},\\ v_{o,2}=v_{i,3},\\ v_{o,3}=v_{i,1}$. The test excitation is symmetric, so the response must be symmetric: $v_{i,1}=v_{i,2}=v_{i,3}=v_i$ and $v_{o,1}=v_{o,2}=v_{o,3}=v_o$. Walking the loop,\n$$v_i = K v_x - G v_i\\ \\Rightarrow\\ v_i = \\frac{K}{1+G}\\,v_x ,$$\nand consequently $v_o=v_i\\equiv v$.\n\n## Current drawn from the supply node\n\nOnly the three PMOS sources are connected to $v_x$, so\n$$i_x = 3\\,i_P = 3\\left(g_{mp}+\\tfrac{1}{r_{op}}\\right)(v_x-v)\n= 3\\left(g_{mp}+\\tfrac{1}{r_{op}}\\right)v_x\\,\\frac{1+G-K}{1+G} .$$\n\nHence\n$$R_x=\\frac{v_x}{i_x}=\\frac{1+G}{3\\left(g_{mp}+1/r_{op}\\right)(1+G-K)} .$$\n\nSubstituting $G$ and $K$ and simplifying (note $1+G-K=(g_{mn}+1/r_{on})R_o$ and $1+G=(g_{mp}+1/r_{op}+g_{mn}+1/r_{on})R_o$):\n\n$$\\boxed{\\,R_x=\\frac{1}{3}\\left[\\frac{1}{g_{mn}+1/r_{on}}+\\frac{1}{g_{mp}+1/r_{op}}\\right]\\,}$$\n\nEquivalently, in terms of the intrinsic gains,\n$$R_x=\\frac{1}{3}\\left[\\frac{r_{on}}{1+g_{mn}r_{on}}+\\frac{r_{op}}{1+g_{mp}r_{op}}\\right].$$\n\n**Neglecting channel‑length modulation** ($r_o\\to\\infty$):\n$$R_x \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right).$$\n\nThis $R_x$ is **positive**: at low frequency the odd number of inverting stages gives negative (stabilizing) feedback around the ring, so a positive increment of $v_x$ draws a positive increment of current. (The *negative* real part that actually sustains the oscillation appears only at the oscillation frequency, where the phase of each inverter deviates from 180°.)",
        "format": "markdown",
        "sha256": "c5cc63c158b8bf84713ee532180175df3e33d8cfa3a50939b0eab82e0765514e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The derivation is internally consistent as a static, low-frequency gm-based model, but it opens the capacitors and misses the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution specifically assigns this kind of answer a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2675,
        "output_tokens": 16659,
        "total_tokens": 19334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2675,
        "output_tokens": 16659,
        "total_tokens": 19334,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Setting up the small‑signal test\n\nPlace a test source $v_x$ at the supply node (the top rail) and let $i_x$ be the current it must deliver. The small‑signal resistance is $R_x = v_x/i_x$, with all other independent sources zeroed.\n\nEach triangle is an **ideal inverting amplifier**. In its small‑signal model the power‑supply pin does not appear as a node that can carry small‑signal current: the block is a 2‑port (input, output) whose supply pins are, by definition, at AC ground when the model is used. Equivalently, the only small‑signal currents that can enter/leave the block are at the signal pins, and an ideal amplifier draws **no** current at its input.\n\n## Why no current can flow at the supply node\n\nLook at the signal loop. The output of each inverter drives only the *input* of the next inverter, and an ideal inverter input is an open circuit (infinite impedance). Therefore the current that can leave any output terminal is zero, so the inverter's output stage delivers no small‑signal current, and (input current = 0) the small‑signal current through each block's supply terminal is zero.\n\nThe closed loop does not change this. Writing the internal node voltages $v_1,v_2,v_3$ around the ring,\n\n$$v_1 = (-A)v_3 = (-A)^2 v_2 = (-A)^3 v_1 \\;\\Rightarrow\\; (1+A^3)v_1 = 0 \\;\\Rightarrow\\; v_1=v_2=v_3=0\\quad(A>0).$$\n\nSo a perturbation applied at the supply cannot sustain any internal signal (the supply node is not part of the gain loop). Hence every small‑signal current that *could* depend on $v_i$ or $v_o$ is identically zero.\n\nThe supply node $v_x$ is therefore connected, in the small‑signal equivalent circuit, to **nothing** that can accept current. The test source sees an open circuit:\n\n$$i_x = 0 \\quad\\Longrightarrow\\quad \\boxed{R_x = \\dfrac{v_x}{i_x} \\to \\infty \\quad\\text{(open circuit)}}$$\n\nPhysically: in the ideal inverter model the power supply does not appear in the small‑signal equations, so the supply impedance has no effect on the oscillator's small‑signal (start‑up/oscillation) behaviour.\n\n## Caveat – realistic inverter\n\nIf each inverter is instead modelled with a finite small‑signal supply conductance (e.g. a CMOS inverter, where a $v_{DD}$ wiggle modulates the bias current), define $R_p$ = resistance seen at the supply of *one* inverter with its signal terminals at AC ground (for a matched CMOS inverter $R_p \\approx 1/g_m$, more exactly $2/(g_m+g_{ds})$ for the unloaded case). Because the three supply currents are independent of each other and the loop cannot transfer supply current into the signal loop, the three $R_p$'s simply appear in parallel at $v_x$:\n\n$$R_x = \\frac{R_p}{3} \\;\\approx\\; \\frac{1}{3\\,g_m}.$$\n\nWith the ideal inverting‑amplifier symbols shown in the figure, $R_p=\\infty$, recovering $R_x=\\infty$.",
        "format": "markdown",
        "sha256": "254fb20b69c6dedd35336ad872a787580a72b0c8e835cf43de1eba37d1e51160"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It treats the inverters as ideal blocks with open inputs and concludes the supply sees an open circuit, missing the oscillation-driven charging and discharging of the node capacitances that sets the resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2675,
        "output_tokens": 16778,
        "total_tokens": 19453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16027,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2675,
        "output_tokens": 16778,
        "total_tokens": 19453,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16027,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**No – the expression does not change.** $R_X=\\tfrac{1}{3}\\!\\left(\\tfrac{1}{g_{mn}}+\\tfrac{1}{g_{mp}}\\right)$ is a *local, instantaneous* (linearized) result, and the same derivation is valid at every instant of the oscillation. What changes is only that $g_{mn}$ and $g_{mp}$ – and therefore $R_X$ – are no longer constants but functions of time.\n\n## Why the formula is unaffected by oscillation\n\nThe small‑signal resistance seen at a node is the local slope $dI/dV$ at the *instantaneous* bias point. It depends on (i) the instantaneous transconductances and (ii) the topology, i.e. on which nodes carry small‑signal current. Both of these are unchanged by the fact that the loop is oscillating.\n\nIt is worth seeing exactly what the \"two diode‑connected devices in series\" picture is really using, because that is the part a student might fear breaks down. For one inverter, with $v$ the small‑signal supply voltage, $a_{in}$ the gate voltage and $a_{out}$ the drain voltage, and with $r_o$ and gate current neglected:\n\n- PMOS (source $=v$, gate $=a_{in}$): $i_{d,p}=g_{mp}(a_{in}-v)$\n- NMOS (source $=0$, gate $=a_{in}$): $i_{d,n}=g_{mn}\\,a_{in}$\n- KCL at the drain node (the only other connection is a gate, i.e. **zero current**):\n  $g_{mp}(a_{in}-v)+g_{mn}\\,a_{in}=0 \\;\\Rightarrow\\; a_{in}=v\\,\\dfrac{g_{mp}}{g_{mp}+g_{mn}}$\n\nThe current into the supply node is $i=g_{mp}(v-a_{in})=\\dfrac{g_{mp}g_{mn}}{g_{mp}+g_{mn}}\\,v$, so\n\n$$R_{\\text{one}}=\\frac{v}{i}=\\frac{1}{g_{mp}}+\\frac{1}{g_{mn}}$$\n\nNote the crucial assumption is **not** \"the input is at AC ground\" (that would give only $1/g_{mp}$) and **not** \"gate is literally tied to drain.\" It is simply *the gate/output nodes carry no small‑signal current*. In the ring those nodes connect only to the gates of the neighbouring inverters, so they carry no resistive current whether the circuit is in a (hypothetical) DC state or swinging in steady‑state oscillation. Hence the same $R_{\\text{one}}$ holds at every instant, and the three identical branches in parallel at the supply rail give exactly $\\tfrac{1}{3}R_{\\text{one}}$. (In the symmetric ring the floating nodes all land at the same potential anyway, so the literal \"diode‑connected\" picture is consistent too.)\n\n## What *does* change (the caveats worth stating)\n\n1. **There is no DC operating point.** An odd number of inverting stages has no stable DC equilibrium, so the original \"DC number\" was really evaluated around an *assumed* bias. The formula is just the slope at whatever bias you freeze.\n2. **The value becomes time‑varying.** During oscillation the bias of each inverter moves around the cycle, so $g_{mn}(t),g_{mp}(t)$ move, and $R_X(t)$ follows the same formula but is no longer constant. When an inverter's input is near a rail, one device is off ($g_m\\to0$), that branch's resistance $\\to\\infty$, and $R_X$ is large for that phase.\n3. **A single number requires an averaging convention.** If you need one value (e.g. for supply design), a time average is not the same as evaluating the formula at the mid‑rail bias, because $1/g_m$ is a nonlinear function of the bias current.\n4. **Frozen‑bias $R_X$ ≠ impedance at $f_{osc}$.** The linearized resistance above is the instantaneous derivative. The actual incremental impedance *at the oscillation frequency* of the periodically time‑varying (nonlinear) circuit can differ; that is a different quantity and is not what the $g_m$‑based expression represents.\n\n## Bottom line\n\nThe symbolic answer and its derivation are unchanged by oscillation – the small‑signal resistance is a local property of the operating point, and oscillation does not alter the local model. The only difference is that, because the operating point now travels around the cycle, $g_{mn},g_{mp}$ and hence $R_X$ are time‑dependent rather than fixed. So: *same formula, time‑varying value.*",
        "format": "markdown",
        "sha256": "afa7069b029d4a4a472affea0b9dddbb30789d1cb3b1c6179e8f948e16990327"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes that the transconductances vary during oscillation, but incorrectly treats the circuit as a sequence of frozen DC operating points and claims the original formula applies instantaneously. It misses the capacitive charging and discharging that sets the oscillating supply current; this matches the rubric’s partial credit for saying the static result holds without the capacitive mechanism.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2759,
        "output_tokens": 12299,
        "total_tokens": 15058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11223,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2759,
        "output_tokens": 12299,
        "total_tokens": 15058,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11223,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: yes – the value the supply node actually presents while the ring is oscillating is *not* $(1/3)(1/g_{mn}+1/g_{mp})$.** That expression is only the *low‑frequency (DC) small‑signal* resistance, and it is obtained under a condition that the oscillation explicitly violates.\n\n**Why the formula is correct at DC.** Look at what is really tied to the supply node: the three PMOS *sources*. The PMOS *gates* are the previous stage's outputs and the PMOS *drains* are each stage's own output – so, in general, the gates are **not** tied to the drains. The \"two diode‑connected devices in series\" picture is therefore not a topological fact; it is true only when, for the small‑signal signal of interest, the inverter's input node equals its output node (gate small‑signal = drain small‑signal). At the symmetric bias point $V_{DD}/2$, and for a DC/low‑frequency perturbation at the supply pin, the linearized ring forces *all* node perturbations to be equal, so each transistor does come out diode‑connected. Then each inverter branch is $1/g_{mp}$ (PMOS) in series with $1/g_{mn}$ (NMOS), and the three branches in parallel give $R_X=(1/3)(1/g_{mn}+1/g_{mp})$. That is a perfectly good **DC** number.\n\n**Why it changes when oscillating.** Oscillation is a finite‑frequency phenomenon, and at the oscillation frequency the inverter's input is *not* at the same AC potential as its output – they are phase‑shifted (by $120^\\circ$ per stage in the ideal 3‑stage case, by the inverter's actual phase at $\\omega_0$ in general). Hence, for the oscillating component, gate $\\neq$ drain: the devices are **not** diode‑connected at $\\omega_0$, and the series‑resistor model of each inverter falls apart. Doing the small‑signal KCL at $\\omega_0$ (with the node capacitances that set $\\omega_0$) shows that the three output phasors are no longer equal, and the impedance looking into the supply node becomes a *complex, frequency‑dependent* quantity whose real part at $\\omega_0$ is generally different from the real DC value $(1/3)(1/g_{mn}+1/g_{mp})$. In other words, the diode shortcut evaluates the wrong (zero‑frequency) point of the supply‑node impedance; the impedance that the oscillator actually loads the supply with, at the oscillation frequency, is not that simple sum. (As a side note, an oscillating circuit's small‑signal model is periodically time‑varying, so it doesn't even have a single time‑invariant \"resistance\" at the supply pin.)\n\n**Caveat / what *doesn't* change.** If by \"small‑signal resistance\" one means strictly the zero‑frequency Thévenin resistance of the circuit *linearized and frozen at the symmetric operating point*, then that particular mathematical object is of course untouched by the large‑signal oscillation. But that is not the impedance relevant to the oscillation, and it is exactly the value the diode‑connected reasoning was meant to capture. So the practical answer to \"does the answer change if the circuit oscillates?\" is **yes**: the formula is the DC/low‑frequency value at the symmetric bias point, and the supply‑node impedance seen during oscillation (at $\\omega_0$) is different because the inverter inputs and outputs are out of phase and the transistors are no longer diode‑connected.",
        "format": "markdown",
        "sha256": "51bf3acd48faa84ef4281fd172f353f6bbb96d9bd73207f431b4d15a263c9c32"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that oscillation changes the analysis, but treats the result mainly as a different frequency-dependent impedance caused by phase shifts. It misses the dominant capacitive charging mechanism and the key conclusion that the supply resistance remains on the order of the MOS on-resistance, not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2759,
        "output_tokens": 25233,
        "total_tokens": 27992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2759,
        "output_tokens": 25233,
        "total_tokens": 27992,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 24426,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: yes – that number is no longer valid while the ring is oscillating.** The expression\n\n$$R_X=\\tfrac{1}{3}\\!\\left(\\frac{1}{g_{mn}}+\\frac{1}{g_{mp}}\\right)$$\n\nis not a property of \"an inverter\"; it is the **incremental (small‑signal) DC resistance** of the network evaluated at its *only* DC operating point – the unstable, all‑nodes‑at‑$V_{DD}/2$ metastable equilibrium. Oscillation destroys every assumption that makes that number come out.\n\n**Why the formula is right at DC.** At the metastable point every gate and every output sits at $V_{DD}/2$. By the symmetry of the closed loop, a small current injected at the common supply rail forces the small‑signal gate voltage and the small‑signal output voltage of *every* inverter to be equal ($v_g=v_{out}$) – exactly the diode‑connected condition. With $r_o$ ignored, the PMOS then looks like $1/g_{mp}$ and the NMOS like $1/g_{mn}$, in series per inverter, and the three identical branches in parallel give $(1/3)(1/g_{mn}+1/g_{mp})$. So the \"two diode‑connected devices in series\" picture is correct *only* at that frozen, balanced point.\n\n**What changes in oscillation.**\n\n1. **No fixed bias point → no fixed $g_m$.** A 3‑inverter ring has no DC equilibrium; the nodes ride a limit cycle. $g_m$ and $r_o$ of every transistor are therefore *time‑varying*, so you cannot even write a single constant $g_{mn},g_{mp}$.\n\n2. **The diode‑connected equivalence breaks.** Away from the balanced point the input of an inverter is near one rail while its output is near the other, so $v_g\\neq v_{out}$ (small‑signal). The look‑in resistance of a branch is then $(v_x-i)$ dependent on the *ratio* of the gate and output swings to the supply swing, not $1/g_m$. The simple series model fails instant by instant.\n\n3. **The three inverters are phase‑shifted**, so at any instant the three supply branches have *different* instantaneous small‑signal resistances; you cannot reduce them to one value in parallel.\n\nHence the quantity the supply actually sees is not a real constant but a **periodically time‑varying (in general complex, frequency‑dependent) impedance** $R_X(t)$ obtained from the full linearized, periodic small‑signal network. If you insist on a single number for the supply load during oscillation, it is the cycle‑average large‑signal load $V_{DD}/\\overline{I_{DD}}$, which is dominated by the dynamic switching current $\\propto f C V_{DD}$ (at most phases one device per inverter is off, so the static conduction path is small) and is *not* equal to $(1/3)(1/g_{mn}+1/g_{mp})$.\n\n**Bottom line.** The somebody's result is the small‑signal resistance at the unstable DC metastable point. Once the circuit oscillates, the bias moves, the transistors stop looking diode‑connected, and the branches fall out of phase, so the constant expression no longer applies – the look‑in \"resistance\" becomes a time‑varying impedance (or, for a single number, a cycle‑average dominated by switching current). So yes, the answer changes.",
        "format": "markdown",
        "sha256": "a792a0da2ffc08d5e942f7affe52d25da508295d01b61e4340a1a5c77bf5daac"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the capacitive switching current as the dynamic load, but misses the key conclusion that the resulting average resistance remains on the order of the MOS on-resistance and is not much higher than the static estimate. It also incorrectly says the ring has no DC equilibrium.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2759,
        "output_tokens": 8399,
        "total_tokens": 11158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2759,
        "output_tokens": 8399,
        "total_tokens": 11158,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7621,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**It increases (and then levels off / saturates).**\n\n**Why**\n\nM7 is the evaluation (tail) switch: it sits in series with the *sources* of the input pair M1/M2, i.e. it is the common‑source node of the differential pair that is pulled to ground through R_ON7. For the regenerative (loop) signal that sets the initial gain, that node is **not** an ideal AC ground, so R_ON7 appears as *source degeneration* for M1 and M2. The effective transconductance of the input stage that forms the latch loop is therefore\n\n  g_m,eff = g_m1 / (1 + g_m1·R_ON7)\n\nand the initial voltage gain is\n\n  A_v0 ≈ g_m,eff · R_load  (R_load set mainly by the on‑resistance of the cross‑coupled feedback pair M3/M4)\n\nBecause R_ON7 ∝ 1/W (M7), widening M7 **reduces** R_ON7, which:\n\n* lowers the source degeneration,\n* raises the effective transconductance of M1/M2,\n* reduces the voltage \"lost\" across the evaluation switch.\n\nAll three effects make A_v0 larger, so the initial voltage gain **rises** as the width of M7 is increased. The gain does not grow forever – once R_ON7 becomes small compared with 1/g_m1, the degeneration term vanishes and A_v0 approaches its maximum (saturation) value, so further widening of M7 gives little extra gain (only larger leakage/charge‑sharing and power).\n\nIn short: wider M7 → smaller R_ON7 → less source degeneration → **higher initial voltage gain**, asymptotically approaching a constant.",
        "format": "markdown",
        "sha256": "75dd69fe31960c08cb8715b9761bff8ef00378393b6a11535b41e295877c0e49"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite trend from the essential result. Although it correctly identifies M7 as the tail device and notes that its on-resistance falls with width, it misses the dominant effect: increased tail current lowers the initial gain.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 11634,
        "total_tokens": 15611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 11634,
        "total_tokens": 15611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11252,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** To first order, the initial (small‑signal, linear‑region) voltage gain does **not** change – it is essentially independent of the width of M7. Widening M7 mainly raises the tail/bias current, which *speeds up* the latching action, but it does not change the small‑signal gain. (Only a very weak second‑order decrease appears once finite output resistances $r_o$ are included.)\n\n**Why**\n\nM7 is the tail device of the differential input pair M1/M2 (its gate is driven by CK, so it sets the bias current that flows through the latch). The \"initial gain\" is the differential gain the circuit has in its linear region, before the regenerative cross‑coupled feedback takes over. In that region the gain is\n\n$$A_v \\;\\approx\\; g_{m1}\\,R_P \\;\\propto\\; \\frac{g_{m1}}{g_{m3}}$$\n\ni.e. it is set by the **ratio of transistor sizes** (M1 vs. the cross‑coupled inverters M3–M6), not by the absolute bias current.\n\nWhen you make M7 wider the tail current $I$ increases, and two things happen at once:\n\n* $g_{m1},g_{m2}$ of the input pair **increase** ($g_m \\propto \\sqrt{I}$ in saturation),\n* the small‑signal resistance seen looking into the cross‑coupled inverters at nodes P/Q ($R_P$, dominated by the $1/g_{m3}$ term) **decreases** ($\\propto 1/\\sqrt{I}$).\n\nThese two effects cancel, so $A_v \\propto \\sqrt{I}\\cdot(1/\\sqrt{I}) \\approx$ constant. (The tail resistance itself does not degenerate the differential pair either, because the common‑source node is an AC ground for the differential signal.)\n\n**Practical consequence:** increasing the width of M7 increases $I_{tail}$, which reduces the latching time constant ($\\tau \\approx C_{out}/g_m$) and improves the output‑slew speed, but it leaves the initial voltage gain (and hence the minimum detectable input / matching requirement) essentially unchanged. If channel‑length modulation is accounted for, $r_o \\propto 1/I$ introduces a small inverse dependence, so the gain *very slightly* decreases – but this is a second‑order effect.\n\nSo: **the initial voltage gain stays (approximately) the same; M7's width controls speed, not gain.**",
        "format": "markdown",
        "sha256": "f5c5280b90451e1fd1ea3f08c6befb2e66b1d314d6a8456414c90f049110f72b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: initial gain decreases as M7 width and tail current increase. Although the answer correctly notes that input-pair gm rises with current, its claimed cancellation by the load misses the relevant gm/ICM dependence.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 16225,
        "total_tokens": 20202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 16225,
        "total_tokens": 20202,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15666,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**It increases.**\n\nM7 is the clocked tail device of the input pair M1–M2, so it sets the bias (tail) current that flows through M1 and M2 during the evaluation phase. Making M7 wider raises this tail current, which in turn raises the transconductance of the input pair, $g_{m1,2}\\propto\\sqrt{I_{tail}}\\propto\\sqrt{W_7}$.\n\nThe \"initial\" voltage gain is the small‑signal gain developed at $V_{out}$ during the short linear interval before the regenerative (latching) action of M3–M6 takes over. In that interval the latch transistors carry no DC bias (they are off at precharge), so the resistances they present to the first stage (their input/on‑resistances) are set by their own geometry and by the small signal, **not** by the tail current. Hence the first stage effectively sees a load $R_{load}$ that is independent of $W_7$, and the initial gain behaves as\n\n$$A_{v,init}\\approx g_{m1}\\,R_{load}\\;\\propto\\; g_{m1}\\;\\propto\\;\\sqrt{W_7}.$$\n\nTherefore, as the width of M7 is increased, the initial voltage gain **increases** (roughly with the square root of the width / tail current).\n\n*Side note (not asked):* the same larger tail current also makes the latch kick in sooner and raises the power dissipation, and the slightly reduced $r_o$ of the biased transistors is a second‑order effect that does not overturn the dominant $g_m$ increase.",
        "format": "markdown",
        "sha256": "e207398fc43dfe071d8d75d18265c21a529762b5d13ab712ae6f1191cccfee4b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies M7 as the tail device and recognizes that widening it raises tail current and input-pair transconductance, but it reaches the opposite of the essential trend. It wrongly treats the initial gain as proportional to gm alone; the relevant gain factor decreases as tail current increases.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3977,
        "output_tokens": 25897,
        "total_tokens": 29874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3977,
        "output_tokens": 25897,
        "total_tokens": 29874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25533,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**It goes down – the initial (linear‑region / small‑signal) voltage gain is reduced.**\n\nWhy:\n\n* Nodes **P** and **Q** are *internal* nodes: they sit between the transconductance input stage (M1/M2, whose drains are P and Q) and the regenerative output nodes **X** and **Y** (the Vout nodes, taken at the drains of M3/M4 and M5/M6). The input pair delivers a differential signal *current* $i_{sig}=g_{m1}V_{in}$ into P/Q; the voltage that appears at X/Y is what gives the gain.\n\n* Adding capacitance at P and Q does two things that both cut the gain:\n  1. **Lower small‑signal impedance at P/Q** – for a given $i_{sig}$ the swing at P/Q is $V_{P/Q}\\approx i_{sig}/(sC_{P/Q})$, so a larger $C_{P,Q}$ means less voltage developed at the input of the M3/M4 stage.\n  2. **Capacitive division of the signal** – the input current is shared between charging $C_{P/Q}$ and the portion that actually reaches the output nodes. The fraction that reaches X/Y scales like $C_{X,Y}/(C_{X,Y}+C_{P,Q})$, so the dynamic small‑signal gain scales roughly as $g_{m1}\\,C_{X,Y}/C_{P,Q}$ (∝ $1/C_{P,Q}$).\n\nHence, **increasing the capacitance at P and Q lowers the initial voltage gain** (and, as a side effect, increases the regenerative time constant, i.e. makes the latch switch more slowly). The gain is recovered only by making $C_{P,Q}$ small relative to the output‑node capacitance.",
        "format": "markdown",
        "sha256": "986136ee42badc8d57b85bf9b75c2966aabbd985dad0dd3132fff63e3941522f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: increasing the capacitance slows the transient but leaves the initial gain approximately unchanged because the longer amplification interval cancels the reduced voltage slope. The answer notes the slower switching but applies a fixed-time loading argument to the initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 18754,
        "total_tokens": 22731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 18754,
        "total_tokens": 22731,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18351,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: it does not change.** The initial (small‑signal) voltage gain of the first stage is set by the *resistive* part of the node – the transconductance of the input pair M1/M2 and the small‑signal resistances seen at P and Q (r₀ of M1, the output resistance of the cross‑coupled pair M3/M4, the on‑resistance of S1/S2, etc.) – i.e. A₀ ≈ gₘ₁·R_P. A capacitor is an open circuit at DC / at t = 0⁺, so it does not load this gain. Adding capacitance C_P, C_Q at nodes P and Q therefore leaves the initial voltage gain untouched.\n\nWhat the extra capacitance *does* affect:\n\n- **Speed / regeneration time constant.** The differential voltage at P–Q grows as V_diff(t) ≈ V_diff(0)·e^{t/τ} with τ ≈ C_P/(gₘ₁ − 1/R_P). Larger C_P, C_Q → larger τ → slower regeneration and slower sampling, and a lower –3 dB bandwidth of the stage.\n- **Noise.** More charge at P and Q means less input‑referred noise margin (the precharge \"noise well\" is bigger).\n- **Observed swing over a fixed short window.** If you define \"gain\" as the output swing developed in a *fixed* time right after the clock edge, a larger C_P, C_Q gives a smaller swing in that window simply because the exponential has not grown as far – but this is a speed effect, not a change in the intrinsic initial gain A₀.\n\nSo, in the usual sense of the term, increasing the capacitance at P and Q **leaves the initial voltage gain the same**; it only makes the dynamic action (latch‑up / comparison) slower and noisier.",
        "format": "markdown",
        "sha256": "0aa988d5142de258e4c35054a325a89137c919e803618427e91e9c5b31403f31"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The conclusion that the initial gain is unchanged is correct, but the answer justifies it using a DC/instantaneous resistive-gain model. The relevant gain is built during the amplification interval: larger capacitance lengthens that interval proportionally, canceling its effect on differential-voltage growth.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 8935,
        "total_tokens": 12912,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3977,
        "output_tokens": 8935,
        "total_tokens": 12912,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**It goes down – the initial (linear‑phase) voltage gain is reduced.**\n\nWhy:\n\n* Nodes **P** and **Q** are the drain of the input pair (M1, M2) *and* the source of the cross‑coupled pair (M3, M4). So P–Q is the \"first‑stage output\" that has to swing before the regenerative M3–M4 latch can pull X–Y (Vout) to a rail.\n* At the start of the comparison phase the small differential current produced by the input pair, ΔI = g_m1·ΔV_in, has nowhere to go but to **charge the capacitance sitting at P and Q**. The differential voltage that develops there is therefore\n  ΔV_PQ(t) ≈ (ΔI / C_PQ)·t = (g_m1·ΔV_in / C_PQ)·t.\n* This ΔV_PQ is exactly the signal that drives the cross‑coupled transistors and hence the output. A larger C_PQ makes ΔV_PQ build up more slowly, so the output swing also develops more slowly (the early‑time output coefficient scales as 1/C_PQ). In other words the gain the circuit achieves in the initial, still‑linear part of the response is **inversely proportional to the capacitance at P and Q**.\n\nConsequences of increasing C_P and C_Q:\n\n* **Initial voltage gain decreases** (and the time constant / settling time of the latching action increases – the comparator is slower).\n* The **final latched values** of Vout (≈ VDD and 0) are *not* changed – the extra capacitance only degrades the initial gain and the speed, not the end points.\n\nSo, in short: more capacitance at P and Q loads the first stage, slows the build‑up of the differential voltage, and therefore **lowers the initial voltage gain**.",
        "format": "markdown",
        "sha256": "cb66db1c83f62c3552cfe3c36b0c76efaf160840b6f151e085791d3891258243"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite to the essential result. Larger capacitance slows the differential voltage buildup at a fixed time, but it also lengthens the amplification phase proportionally, so the capacitance cancels in the initial gain by regeneration.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3977,
        "output_tokens": 14583,
        "total_tokens": 18560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3977,
        "output_tokens": 14583,
        "total_tokens": 18560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14166,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Degrade.**\n\nLook at what M5 and M6 actually do during the phase in which the output changes.\n\n* **Precharge (CK = 1):** S3 and S4 force X and Y to VDD. M5 and M6 are OFF (their gates are at the same high level), so they do no work here – their gate capacitances, however, *add load* that S3/S4 have to charge. Bigger M5/M6 ⇒ more gate cap on X and Y ⇒ slower precharge.\n\n* **Evaluate (CK = 0):** S1–S4 and M7 turn off; P and Q hold the sampled values (one is VDD, the other 0). The only large transition is the *losing* internal node falling from VDD to 0. That falling node is discharged by the NMOS device M3 or M4, which connects it to the low rail (P or Q = 0). The PMOS device tied to that same falling node (M6 or M5) has its gate on the *high* winner node, so it is **OFF** and contributes no pull‑down current. The PMOS pair therefore helps only the *winning* node, which was already precharged to VDD and needs no significant drive.\n\nSo, for the speed‑critical transition, M5 and M6 provide **no useful current** – they sit on the node that is held high and are off on the node that is falling. Making them wider only increases their gate capacitance, which is attached directly to X and Y (and to the precharge load). More load on the nodes that must move, with no increase in the current that moves them, can only make the fall slower (and the precharge slower).\n\nHence increasing the widths of M5 and M6 **degrades the speed**. (The \"stronger latch = faster\" intuition does not apply here, because the cross‑coupled PMOS pair is not in the pull‑down path that sets the propagation delay; it is pure load for that transition.)",
        "format": "markdown",
        "sha256": "976640d9971dafaabc61b553d1402c5a701faf622c3505b6810d4d1d89dd0f9e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion and incorrectly dismisses the cross-coupled PMOS devices’ regenerative contribution. It identifies a real capacitance penalty, but that limits the benefit only at larger widths; initially, stronger regeneration improves speed.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3976,
        "output_tokens": 11324,
        "total_tokens": 15300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3976,
        "output_tokens": 11324,
        "total_tokens": 15300,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10886,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Degrades.**\n\nM5 and M6 form the cross‑coupled (regenerative) load pair, but look at what they do in each phase:\n\n* **Sampling / precharge phase:** the internal nodes X and Y are precharged to V_DD, so the gates of M5 and M6 (tied to the *opposite* node) are also at V_DD. Both transistors are therefore **off** during this phase – they supply no drive current at all. Their only effect here is to add parasitic capacitance at X and Y (their own drain caps, plus, because of the cross‑coupling, their *gate* caps, which land on the opposite node). The small differential voltage that the differential pair M1–M2 (through M3–M4) has to build up across X–Y must charge this capacitance. Since M1–M4 are fixed, making M5/M6 wider increases C_X and C_Y without increasing the available charging current, so the time to develop the differential signal (the sampling delay) grows with their width.\n\n* **Regeneration phase:** once X–Y has dipped below the threshold, M5/M6 turn on and provide the positive‑feedback (negative‑resistance) current that pushes the nodes to the rails. A wider device does increase this latching current, but the regeneration time constant is τ ≈ C_L/g_m, and the part of C_L that M5/M6 themselves contribute (gate + drain caps) scales in proportion to g_m. So the benefit of extra width on the regeneration rate **saturates** (it can only drive the fixed, non‑scaling portion of the load capacitance faster), whereas the sampling‑phase penalty from the added gate/drain capacitance keeps growing.\n\nBecause the unbounded sampling‑phase slowdown dominates the bounded regeneration‑phase improvement, the overall minimum delay / maximum clock frequency **gets worse** when M5 and M6 are made wider. In short: do not over‑size M5 and M6 – the extra load capacitance they add (they are off while sampling) degrades the speed.",
        "format": "markdown",
        "sha256": "82db58e3a8268b6b7e05880070b3a380e9045164d28c1845820bc0dd4e82388b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer identifies both stronger regeneration and added parasitic capacitance, but incorrectly concludes that capacitance dominates overall. The expected trend is that widening M5/M6 initially improves speed, with capacitance limiting the benefit only at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3976,
        "output_tokens": 13345,
        "total_tokens": 17321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3976,
        "output_tokens": 13345,
        "total_tokens": 17321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Speed degrades.**\n\nReasoning:\n\n- **Role of M5/M6.** M5 and M6 are the cross‑coupled PMOS pair whose sources tie to VDD and whose drains tie to the output nodes X and Y (with gates cross‑coupled: M5 gate = Y, M6 gate = X). They are the weak pull‑ups / hold devices of the latch.\n\n- **Precharge (CK = 0).** S3 and S4 (PMOS, gate low) connect X and Y straight to VDD, so the outputs are charged by S3/S4, *not* by M5/M6. Widening M5/M6 does not help the precharge.\n\n- **Evaluation (CK = 1).** S3/S4 turn off. The input side (M1/M2 + M7) drives P and Q, and the NMOS M3/M4 then discharge the output node that must go low. For that falling node, the cross‑coupled PMOS (M5 or M6) has its gate at the *high* node, so it is **OFF** – it contributes no drive to the discharge, only its gate capacitance, which loads X (or Y). The node that must stay high is already at VDD from precharge, so it does not need to \"switch\"; M5/M6 merely hold it.\n\n- **Consequence of wider M5/M6.** The propagation delay is set by how fast M3/M4 discharge the output capacitance C_X = C_load + C_g(M5) + C_g(S3). Increasing the widths of M5 and M6 increases C_g(M5) and C_g(M6), so the discharge (and the resulting output transition) takes longer. The stronger PMOS pull‑up only improves hold strength / noise margin on the already‑high node and cannot compensate for the extra load on the speed‑critical falling node.\n\nTherefore, increasing the widths of M5 and M6 **degrades** the speed (slower output transitions / higher access latency), even though it gives a stronger latch hold.",
        "format": "markdown",
        "sha256": "c740b945ce655f8b62036eceb9e5752f12cebf3cac9e5daba2f8e3e609e96190"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer recognizes that wider M5/M6 add capacitance, a real eventual speed limit, but incorrectly concludes that speed degrades initially. It misses that their stronger cross-coupled pull-up action speeds regeneration over the initial sizing range.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3976,
        "output_tokens": 9603,
        "total_tokens": 13579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9157,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 3328,
        "input_tokens": 3976,
        "output_tokens": 9603,
        "total_tokens": 13579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9157,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the speed degrades (you do not gain speed by sizing the clocked devices up).**\n\n**Why**\n\nLook at what a \"clocked\" device actually does in this topology. In each half the clocked PMOS and clocked NMOS sit *in series* between the rail‑side feedback device (the top PMOS whose gate is tied to the feedback line, and the bottom device M1 whose gate is also on the feedback line) and the internal node (X on the left, Y on the right, which feeds Inv₃). The feedback devices, not the clocked ones, are what actually charge/discharge the node *between* them.\n\nSo when a clocked transistor turns on, the sequence is:\n\n1. The feedback transistor (top PMOS or M1, size unchanged) first moves the internal \"middle\" node toward the rail.\n2. Only then does the clocked transistor pass the rail to X/Y, and the output fully settles.\n\nThe middle node is effectively a floating node that must track the rail; its time constant is set by the *feedback* transistor's resistance times the capacitance sitting on that middle node. That capacitance includes the diffusion capacitance of the clocked transistor that is tied to it. Therefore:\n\n- **Wider clocked transistor → larger diffusion cap on the middle node → the middle node (which is driven by the unchanged feedback device) moves more slowly → X/Y settle later.** This is the dominant term.\n- **Wider clocked transistor → larger gate cap on CK / CK̄ → heavier load on the high‑fan‑out clock nets → the clock edge that turns the device on/off is itself slowed**, adding delay to the moment the pass path even opens.\n- The only \"benefit\" is a lower on‑resistance of the clocked device, but that resistance is in series with the feedback device and only multiplies the relatively small output capacitance (C_X, C_Y + Inv₃ input). It is a second‑order improvement, while the added middle‑node and clock capacitances are first‑order penalties.\n\nBecause the delay is governed by the RC of the internal node that the *unchanged* feedback device has to drive, and by the clock load, increasing the widths of the clocked transistors increases the dominant capacitances without relieving the dominant resistance. The net propagation/settling time of the latch therefore **increases**.\n\n**Conclusion:** increasing the widths of the clocked (CK / CK̄) transistors does **not** improve the speed of this latch – it **degrades** it. (The clocked devices are already in the critical path; sizing them up only adds parasitic capacitance at the floating internal nodes and on the clock, which is the rate‑limiting factor.)",
        "format": "markdown",
        "sha256": "c6a27e01b6aa0e0b32153a40f8f3541b4fa3c5360e7719f162eca3b002d8e22c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the clocked and data-driven devices are in series and notes the added capacitance, but reaches the opposite conclusion: widening the clocked devices improves speed initially by reducing their on-resistance. The golden solution assigns 2 to answers that conclude speed degrades.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 5631,
        "total_tokens": 7368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 5631,
        "total_tokens": 7368,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5038,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Speed degrades.**\n\nAlthough the first reaction is \"wider transistor → lower $R_{on}$ → faster,\" the clocked devices in this circuit are *not* the only resistive element in the switching paths, and they sit on a shared, finite‑drive signal. The two effects that make them wider actually hurt dominate:\n\n1. **They are in series with the fixed‑width feedback devices.** Each charge/discharge path for the internal nodes $X$ and $Y$ is a *series* pair: a clocked device (gate = $CK$ or $\\overline{CK}$) in series with a feedback device (the top PMOS and $M_1$, gates = $Z$ or $X$). The path resistance is $R_{\\text{path}} = R_{\\text{clocked}} + R_{\\text{fixed}}$. Widening the clocked device reduces only $R_{\\text{clocked}}$, and the benefit saturates at $R_{\\text{fixed}}$, so the resistance saving is limited.\n\n2. **They load the clock net.** The gates of the clocked transistors are tied to $CK$/$\\overline{CK}$, which are global signals driven by a clock generator of finite strength. Increasing their width adds gate capacitance to the clock tree, slowing the clock edges and increasing skew. Because the internal nodes only switch *through* these devices, a slower/less clean clock edge directly slows every stage.\n\n3. **They add parasitic load on $X$ and $Y$.** The drain/source capacitance of a wider clocked device is connected to the internal nodes it drives, raising the $C$ that the (only partly reduced) $R$ must charge/discharge — this cancels much of the $R$ reduction.\n\n4. **Hold/leakage penalty.** In the phases where $X$ or $Y$ float, the clocked device is OFF. A wider OFF transistor has larger subthreshold and GIDL leakage, shortening the hold time of the dynamic node and forcing a slower clock to avoid data loss.\n\nSo the limited resistance reduction is outweighed by the larger clock load, the extra node capacitance, and the higher leakage. **Increasing the widths of the clocked transistors degrades the speed.** (The same argument is why the *feedback* devices, $M_1$ and the top PMOS, are the ones you would widen if you wanted a faster path.)",
        "format": "markdown",
        "sha256": "8e02e33c8c695e7ebb93c33fc05a89d00eb6d2e55738ae288421073531263a0b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer concludes that speed degrades, contrary to the expected initial improvement as widening lowers the clocked transistors’ on-resistance. Added node capacitance can eventually limit or reverse that benefit, but it does not justify the stated overall trend.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 7156,
        "total_tokens": 8893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1737,
        "output_tokens": 7156,
        "total_tokens": 8893,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6629,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**The speed degrades (the latch gets slower).**\n\nWhy this is not the \"wider = faster\" case you'd expect for a normal gate:\n\n* In this latch the internal nodes **X** and **Y** are *not* driven by a full inverter. They are driven through a **series stack** of pass transistors. In each half, a *clocked* device (the PMOS gated by CK/CK̅ and the NMOS gated by CK̅/CK) sits **in series with a feedback device** (the top PMOS and the bottom M1, gated by X or Z) that forms the actual connection to VDD/GND.\n* Widening the clocked transistors does lower their own on‑resistance (∝ 1/W). But it also adds **drain/source and gate‑overlap capacitance directly at X and Y**, and adds **gate capacitance that loads the CK/CK̅ nets**.\n* To charge or discharge X or Y, current must flow *through the fixed‑size feedback transistor in series*. So the relevant time constant is\n\n  τ ≈ (R_feedback + R_clocked/W) · (C_fixed + k·W)\n    = (terms that shrink) + **R_feedback · k · W**.\n\n  The last term *grows* with width: the extra capacitance introduced by the wider clocked devices has to be charged through the *unchanged* on‑resistance of the feedback devices.\n\n* Once the clocked device's own resistance is no longer the bottleneck (which it stops being quickly, because the feedback device's resistance is fixed in series), the only effect of making it wider is to increase the capacitance at an already high‑impedance node and to load the clock. The propagation delay therefore increases.\n\nHence there is an **optimum** width for the clocked transistors, and increasing the width beyond it – and in the usual sizing range – **degrades the speed** of the circuit.",
        "format": "markdown",
        "sha256": "26092b0e26e2ccccff9693f6638ec68025cd64314e6eab0c98e14457ecdb1bf2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the resistance reduction and added-capacitance tradeoff, but concludes that widening degrades speed rather than improving it initially. The golden solution assigns this conclusion 2.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1737,
        "output_tokens": 9701,
        "total_tokens": 11438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1737,
        "output_tokens": 9701,
        "total_tokens": 11438,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9272,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No.**\n\nThe circuit is built only from a *complementary* clock pair, $\\overline{CK}$ and $CK$, which are 180° (antiphase) apart. The two identical four‑transistor blocks are cross‑coupled clocked (latch‑like) stages: the output of one block (directly as $X$, and inverted through $\\text{Inv}_3$ as $Z$) only acts as the control/enable gate of the outer transistors of the other block. The inverter $\\text{Inv}_3$ merely produces the logical complement of $Y$.\n\nConsequences:\n\n* Every node in the structure can only be a function of the two existing clock phases, so the only phase relationships that can appear between any two outputs are **0° or 180°** (in‑phase or complementary).\n* There is no element that introduces a quarter‑period (90°) shift — no four‑stage inverting ring, no delay line, no resonant/quarter‑wave tank. A 90° relationship cannot be synthesized from a two‑phase input with static cross‑coupled logic.\n\nHence the outputs form a **two‑phase (complementary / antiphase) pair, not a quadrature (90°) pair**. To obtain true quadrature outputs you would need four clock phases (or an explicit 90° phase‑shifting element), which this structure does not contain.",
        "format": "markdown",
        "sha256": "2fd1aeb7139a50e82a6a0652a2db9ded314782087a4ed851968c23eaf4fa2f85"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is wrong: the C2MOS latches form a divide-by-two, with their outputs nominally in quadrature. The answer recognizes latch-like stages and complementary clocks but incorrectly assumes the outputs can only be 0° or 180° apart.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 11291,
        "total_tokens": 13012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 11291,
        "total_tokens": 13012,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**No – this structure does not generate quadrature (90°) outputs.** It produces only the two *complementary* phases of the reference clock (0° and 180°), i.e. a differential clock, not an I/Q pair.\n\n**Why the phases lock to 0°/180°**\n\nLook at when each output node is actually controllable:\n\n* **Node X (left cell):** the pull‑up (P1·P2) and pull‑down (N3·N4) paths both require **CK = 1**. When CK = 0 the left cell is high‑Z and X simply holds its previous value. So X can only change during the *CK‑high* half‑cycle.\n* **Node Y (right cell):** by mirror symmetry the right cell is enabled only when **CK = 0**, so Y can only change during the *CK‑low* half‑cycle.\n\nBecause each node is \"frozen\" on the half‑cycle when it is *not* enabled and is forced to the opposite of its stored value on the half‑cycle when it *is* enabled, its transition snaps to the **edge of the enable window**, which is exactly a CK edge. Tracing the recurrence per cycle gives Xₙ = Yₙ₋₁ and Yₙ = ¬Xₙ ⇒ Xₙ = ¬Xₙ₋₁, so each node toggles once per cycle, but its edge lands on a CK edge (X on the CK 1→0 / 0→1 edge, Y on the other). The inverter **Inv₃** in the feedback only supplies the inversion needed for the cross‑coupled pair to toggle regenerative‑ly (without it the pair latches to a DC level); its small propagation delay does **not** push the output edge out of the clock edge, because the node is held during the rest of the cycle. The matched M₁ transistors only provide latch symmetry, not a phase shift.\n\nConsequently X and Y are 180° apart from each other, and each is 0° or 180° with respect to CK. The buffer Z = ¬Y is likewise 0°/180°. There is no node at 90° or 270°.\n\n**What would be needed for true quadrature**\n\nA quarter‑period delay in the feedback loop (e.g. a 4‑inverter ring, or a deliberate T/4 delay element, so that the loop presents the opposite value *mid*‑window rather than at the window edge). Only then would an output edge land a quarter‑cycle away from the CK edge, giving 90°/270° phases.\n\nSo, as drawn, the circuit is a cross‑coupled‑inverter latch/phase regenerator that outputs the two in‑phase‑locked (0°/180°) clocks – **not** quadrature outputs.",
        "format": "markdown",
        "sha256": "458caac09e28d93fc71ce0a228441f206d9fbfcb52ebd0997465408675845c7b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The circuit is a divide-by-two, so X and Y switch half an input period apart and provide nominal quadrature. The answer instead claims they are 0°/180° phases of the input, based on an incorrect topology and timing analysis.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 24463,
        "total_tokens": 26184,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1721,
        "output_tokens": 24463,
        "total_tokens": 26184,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 23828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The two 4‑transistor blocks cross‑coupled through node *X* and the inverter Inv₃ form a self‑timing phase‑splitter that locks into a 4‑step (i.e. 2 × T_CK) cycle in which **X and Y are 90° apart**, and **Z = Y̅**. So the node set {X, Y, Z} is a quadrature clock set (one phase, the in‑quadrature phase, and its complement).\n\n**Why (per‑half‑cycle update rules).** Looking at each column as a series pull‑up / series pull‑down to its output:\n\n*Left column (output X, gated by Z = Y̅):*\n- CK = 1 → X is forced to 1 if Z = 0 and to 0 if Z = 1 ⇒ **X = Y**\n- CK = 0 → both networks off ⇒ **X holds**\n\n*Right column (output Y, gated by X):*\n- CK = 0 → Y is forced to 1 if X = 0 and to 0 if X = 1 ⇒ **Y = X̅**\n- CK = 1 → both networks off ⇒ **Y holds**\n\nIterating these rules (starting from any state) settles into the repeating pattern (one slot = T_CK/2 = ¼ of the output period):\n\n| slot | 0 | 1 | 2 | 3 |\n|------|---|---|---|---|\n| CK   | 1 | 0 | 1 | 0 |\n| **X**| 1 | 1 | 0 | 0 |\n| **Y**| 1 | 0 | 0 | 1 |\n| **Z**| 0 | 1 | 1 | 0 |\n\nX falls one slot after Y falls, and each output has a period of 4 slots, so one slot = 90°. Hence X and Y are in **quadrature**, and Z is the complement of Y.\n\nSo the structure does indeed provide quadrature outputs (at ½ the input clock frequency).",
        "format": "markdown",
        "sha256": "45af6d4d3e87af1369cf7a4daf41c191ad4b6dc92c09ac9fb3736fce4d43c54d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies nominal divide-by-two quadrature, but treats the phase relation as exact and omits both the Inv3 delay and unequal latch loading that make it nonideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1721,
        "output_tokens": 13900,
        "total_tokens": 15621,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1721,
        "output_tokens": 13900,
        "total_tokens": 15621,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13432,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the speed improves (with diminishing returns), not degrades.**\n\n**Why.** In this circuit the four transistors whose gates are driven by CK / CK̄ are *series pass‑switches*: they connect V_DD and GND to the *sources* of the two internal inverting stages (the middle PMOS/NMOS pairs). The nodes whose transition times actually set the stage delay are the **gates and drains of the middle transistors** and the inverter's input/output – i.e. the nodes that are cross‑coupled through the inverter.\n\nNow look at what happens when you make the clocked transistors wider:\n\n1. **Effect on the signal path (helps).** The current that charges/discharges each internal signal node flows *through* a clocked transistor (V_DD → clocked PMOS → middle PMOS → node, and GND ← clocked NMOS ← middle NMOS ← node). So the on‑resistance of the clocked device is in series with the inverter that drives the node. Widening it lowers that series resistance, so the source node sags less and the middle transistor runs closer to its full overdrive, which speeds up the transition at the signal node. (The time for the clocked switch to \"present\" the rail to its source node also scales as (C·W)/(I·W) ≈ const + (const/W), so it does not get worse either.)\n\n2. **Effect on capacitance (does *not* hurt the signal path).** The extra junction/gate capacitance introduced by the wider clocked devices lands on (a) the *source/rail* nodes of the middle transistors – which are clamped to V_DD or GND by those same devices, so they are charged by the clock, not by the signal transistors – and (b) the **clock net**. None of this capacitance appears on the critical internal signal nodes. Hence it does not add load that the slow middle transistors must move.\n\nSo the only thing that changes on the timing‑critical path is a *reduction* in series resistance → lower delay → **faster** operation. The improvement saturates once the clocked on‑resistance is small compared with that of the middle transistors (so minimum‑width clocked devices are already \"good enough\"), and the price you pay is a larger capacitive load on the clock distribution – which is the only way you could end up with a net slowdown, and only if the clock edge itself becomes the bottleneck.\n\n**Bottom line:** for the circuit's own switching speed, increasing the widths of the clocked transistors **improves** performance (reducing the series R in the drive path) without loading the signal nodes; the trade‑off is increased load on the clock.",
        "format": "markdown",
        "sha256": "63ab9a555c12aa35b121c2f0f86666affeef775b44c250c158fde296f7c20ece"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that widening improves speed by reducing series on-resistance with little direct output loading. It omits the charge-sharing effect that degrades swing, and instead suggests the added capacitance has no signal-path consequence, so it does not earn full credit.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1746,
        "output_tokens": 17129,
        "total_tokens": 18875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1746,
        "output_tokens": 17129,
        "total_tokens": 18875,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16531,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the speed degrades.**\n\n**Why.** Look at what the four \"clocked\" transistors (gates = CK, CK̄) actually are in this loop. They are not part of the data‑path driving stage; they are *series pass/access switches* that gate the VDD and GND connections of the two cross‑coupled inverter stages. The cross‑coupled (inner) transistors are the real drivers, because their gates are the internal loop nodes (the signal that has to swing), whereas the clocked transistors' gates are tied to the external clock CK/CK̄.\n\nNow consider the two effects of widening the clocked transistors:\n\n1. **Gate capacitance → not in the loop.** The gates of the clocked transistors are driven by CK/CK̄, an external low‑impedance input. So the extra gate capacitance they add lands on the *clock* net, not on any node of the timing loop. It does not help the loop at all (and, if the clock driver is real, it only slows the clock edges).\n\n2. **Drain/source capacitance → loads the loop nodes.** The drains/sources of these transistors sit on the internal nodes (the outputs of the two inverter stages, i.e. the nodes the cross‑coupled pair and the feedback inverter must charge and discharge). Widening them increases the parasitic capacitance at exactly those nodes. The devices that have to move that charge (the cross‑coupled transistors and the feedback inverter) are *not* being widened, so each stage's RC delay grows.\n\nThe only possible benefit of making the clocked devices wider is a lower on‑resistance while they conduct. But that benefit is small and is more than cancelled:\n\n- They are in *series* with the unchanged cross‑coupled transistors, so once the access device is widened past balance the series resistance is set by the (unchanged) data transistor, not by the clocked one.\n- For half the clock period the clocked transistor is **off**, during which its extra channel capacitance is pure load on the node with no drive at all.\n\nNet result: the internal loop nodes see more load while the loop's driving strength is unchanged, so the delay per stage increases and the oscillation/propagation speed **degrades**. (The feedback inverter's own load is unaffected, since the clocked gates are not on its output node, so even its stage does not compensate the loss.)\n\nHence, increasing the widths of the clocked transistors makes the circuit *slower*, not faster.",
        "format": "markdown",
        "sha256": "35c9d9f7e7ae150f6bf0f01516726ff93c91c9d92dfa2e426f4041cc7c07398e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: widening the clocked devices improves speed by reducing series resistance, while their added capacitance is largely off the data path. It also misidentifies the added capacitance as loading the output nodes.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1746,
        "output_tokens": 14218,
        "total_tokens": 15964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 1746,
        "output_tokens": 14218,
        "total_tokens": 15964,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13651,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: it degrades (net).**\n\n**Why**\n\nThe block is a two‑phase clocked (transmission‑gate) inverter / delay loop. The two transmission gates are only *pass* elements – during one clock phase the first TG connects the feedback node to the internal node, and during the other phase the second TG connects that internal node to the inverter input. The **static inverter on the right is the only full‑strength driver** in the loop; the pass devices merely \"hand off\" charge. Hence the stage delay is set mostly by the inverter's finite drive plus the time it takes the pass devices to charge the inverter's terminals.\n\nNow scale the widths of the four clocked (CK/CK̄) transistors by a factor *k*:\n\n* **On‑resistance** drops by *k*. This speeds up the charge transfer through the TGs, but only until that RC time becomes negligible compared with the inverter's own time constant – i.e. the benefit **saturates**. The pass devices were never the bottleneck once they are reasonably sized.\n* **Diffusion (S/D) capacitance** at the inverter's *input* node (the output side of the 2nd TG) and at the inverter's *output* node (the feedback / input side of the 1st TG) each connect to two terminals of the clocked transistors, so they **grow in proportion to *k***. The inverter's drive strength is fixed, so both its output time constant (R_inv·C_load) and its input‑referred delay grow roughly linearly with *k*.\n* **Gate capacitance on the global clock nets** also grows with *k*, slowing the clock tree and raising power, without helping the inverter at all.\n\nBecause the term that *improves* (pass‑device RC) saturates while the term that *worsens* (load seen by the fixed inverter, and clock load) keeps growing, the total propagation delay around the loop increases.\n\n**Caveat:** if the pass transistors were initially far too small, a *modest* increase would help up to an optimum width. Beyond that optimum – and for any reasonably sized design – making the clocked transistors wider only adds parasitic and clock capacitance, so the **speed degrades**. The correct way to speed this up is to size the *inverter* (the actual driver), not the pass devices.",
        "format": "markdown",
        "sha256": "d7fcf9e5f676e001868eca5a1f0e10180e4780ab4ffa6034079779c8c4131d2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that widening the clocked devices degrades speed, based on increased loading at the inverter input and output. In this topology, the added capacitance is mainly on internal nodes, so the devices reduce data-path resistance with little output loading and speed improves; the candidate’s generic on-resistance point does not overcome its mistaken topology and conclusion.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1746,
        "output_tokens": 11261,
        "total_tokens": 13007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1746,
        "output_tokens": 11261,
        "total_tokens": 13007,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10731,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the blocks are\n\nReading the figure left‑to‑right, the loop consists of:\n\n| # | Symbol | Role |\n|---|--------|------|\n| 1 | 1‑pole switch **CK** | clocked pass gate (transparent when CK = 1) |\n| 2 | Triangle + bubble **Inv₁** | inverter |\n| 3 | 1‑pole switch **CK̄** | clocked pass gate (transparent when CK = 0) |\n| 4 | Triangle + bubble | inverter |\n| 5 | Triangle + bubble | inverter |\n| 6 | wire from the right end back to the left end | feedback |\n\nGrouping them into clocked stages:\n\n* **Master stage** = `CK` + `Inv₁` → a *clocked inverter* (a 1‑phase latch). When CK = 1 its output follows its input; when CK = 0 it holds.\n* **Slave stage** = `CK̄` + 2nd inverter → a second clocked inverter, transparent on the **opposite** phase.\n* **3rd inverter** = the feedback inverter that turns the slave output `Q` into `Q̄` and feeds it back to the master input.\n\nSo `CK + Inv₁` ‖ `CK̄ + Inv₂` is exactly a **2‑phase (master‑slave) D latch**, and the third inverter ties the data input to `D = Q̄`.\n\n## Signal tracing\n\nLet `Q` = output of the slave inverter, and let the right‑hand feedback node be `D`.\nBecause two inverters (the 2nd and 3rd) sit in series, the feedback node is `D = Q̄`.\n\n* While **CK = 1** (master open, slave closed):\n master output = `¬D = ¬Q̄ = Q` (it just re‑asserts the present state); `Q` is held by the slave.\n* While **CK = 0** (master closed, slave open):\n slave passes the master output and inverts it: `Q := ¬(master out) = ¬Q` (old) = `Q̄`.\n\nHence on every **falling edge of CK** the output is forced to its own complement: `Q ← Q̄`. That is the definition of a **T‑flip‑flop with T = 1 (a toggle flip‑flop)**, equivalently a **D‑flip‑flop with D = Q̄**.\n\nThe odd number of inverters in the loop (3) is what makes it *toggle*; with only two inverters you would get `D = Q`, i.e. a latch that just holds and never divides.\n\n## Timing (ideal switches)\n\n```\nCK     :  ___|‾‾‾‾|_____|‾‾‾‾|_____\nCKbar  :  ‾‾‾‾|_____|‾‾‾‾|_____|\nInv1out:  ‾‾‾‾|‾‾‾‾|_____|‾‾‾‾|_____|   (= Q, leading)\nQ      :  ______|‾‾‾‾‾|_______|‾‾‾‾‾|__  (updates on CK falling edge)\nQbar=D :  ‾‾‾‾‾|_______|‾‾‾‾‾|______|  (feedback / right‑hand output)\n```\n\n* `Q` changes **once per clock cycle** → its frequency is **f<sub>CK</sub>/2** (50 % duty square wave).\n* The internal node after `Inv₁` carries the same half‑clock, phase‑shifted by half a phase; together with `Q`/`Q̄` the circuit also generates the two non‑overlapping clock phases, so it doubles as a small **phase/frequency generator**.\n\n## Conclusion\n\nThe arrangement is a **2‑phase clocked master‑slave D‑flip‑flop whose data input is fed from its own complemented output (D = Q̄)**. With no external data input it is autonomous, so it operates as a **divide‑by‑2 frequency divider / toggle flip‑flop**: the right‑hand output (and the feedback line) is a clean square wave at **half the clock frequency**, toggling on every falling edge of CK. The labelled `Inv₁` marks the master latch, the `CK`/`CK̄` switches provide the non‑overlapping master‑slave clocking, and the final inverter supplies the negative feedback that makes the loop toggle rather than latch.\n\n*Practical note:* the switches are drawn as ideal single‑poles. In a real CMOS implementation each would be a pass transistor or a transmission gate; because the floating nodes sit at inverter inputs, the inverter thresholds absorb the V<sub>th</sub> drop of a single pass device, so the logic behaviour above holds.",
        "format": "markdown",
        "sha256": "ddadedf085724b3cdd300384029a7d49ade39b1c5a8d67c7b828d46f4beb8ba6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic master-slave divider that toggles and produces an output at half the clock frequency. The detailed signal naming and secondary implementation claims are not essential to the core answer.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9393,
        "total_tokens": 10519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 9393,
        "total_tokens": 10519,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8269,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the figure is\n\nIt is a **closed loop (ring)** made of three inverters (the three triangles‑with‑bubble; the first is `Inv₁`) interrupted by **two pass‑gates (switches)** driven by complementary clocks `CK` and `CK̄`. The bottom wire ties the output of the third inverter back to the input of the `CK` switch, so there is **no external data input** – the only signals entering the ring are the two clock phases.\n\n### Node labels (left → right around the ring)\n\n| Node | Location | Relation |\n|------|----------|----------|\n| S | left of `CK` switch = feedback line = out(3rd inv) | S = V |\n| T | right of `CK` switch = in(`Inv₁`) | – |\n| U | out(`Inv₁`) = left of `CK̄` switch | U = ¬T |\n| V | right of `CK̄` switch = in(2nd inv) | – |\n| W | out(2nd inv) = in(3rd inv) | W = ¬V |\n\nSwitch `CK` connects **S–T** when `CK = 1`; switch `CK̄` connects **U–V** when `CK = 0`.\n\n## Key structural fact\n\nBecause the two switches are **complementary**, the ring is **never a continuous feedback path**: in every clock phase exactly one switch is open, cutting the loop. Therefore the three‑inverter ring **cannot oscillate at the (fast) RC/propagation‑delay frequency** that a bare odd‑inverter ring would. The circuit is also **stable when the clock is stopped** (a node left behind an open switch just holds its charge on the inverter's input capacitance).\n\n## Phase‑by‑phase operation\n\nLet `v` be the value held at **V** at some instant.\n\n| Phase | CK | CK̄ | T (=S when closed) | U | V | S = out(3rd inv) |\n|-------|----|----|--------------------|----|----|------------------|\n| 1 | 1 | 0 | T = S = V = v | U = ¬v | V held = v | v |\n| 2 | 0 | 1 | T held = v | U = ¬T = ¬v | V = U = ¬v | ¬v |\n| 3 | 1 | 0 | T = S = V = ¬v | U = v | V held = ¬v | ¬v |\n| 4 | 0 | 1 | T held = ¬v | U = v | V = U = v | v |\n| 1′ | 1 | 0 | → back to (1) | | | |\n\nSo the stored bit **inverts once per full clock period**, and the output **S** (the right‑hand node / the feedback line) follows:\n\n```\nCK  :  ____|‾‾‾‾|____|‾‾‾‾|____|‾‾‾‾|__\nS   :  ‾‾‾‾|____|____|‾‾‾‾|‾‾‾‾|____|____   (toggles once per period)\n```\n\n## Conclusion\n\n* The arrangement is a **2‑phase (CK / CK̄) gated ring** of three inverters.\n* The complementary pass‑gates keep the odd‑inverter loop **open in every phase**, so it is **not** a free‑running ring oscillator at the inverter‑delay frequency, and it **freezes** if the clock is halted.\n* While the clock runs, the internal feedback forces the single stored bit to **toggle every clock cycle**, so the output is a **divide‑by‑two waveform at f_CK / 2** (its phase is set by power‑up conditions, since there is no data input or reset).\n* In other words, as drawn it is a **clock‑gated, gatable divide‑by‑2 oscillator**, not a usable memory element. To turn it into a latch you would have to break the self‑feedback (e.g. drive S from an external input or add an enable), because the present closed feedback makes it an oscillator.\n* Design caveat: `CK` and `CK̄` must be truly complementary with **no overlap**; if both switches ever conduct simultaneously the three‑inverter loop closes and a glitch / high‑frequency oscillation appears for that interval.\n\nSo the \"arrangement\" is best understood as **an odd‑inverter ring whose feedback is sampled, not continuous**, giving a clock‑synchronous half‑frequency output rather than an autonomous ring‑oscillator output.",
        "format": "markdown",
        "sha256": "13108ec94e68f4a0aad2ecec39264dc690ae632f698249f2b2061ed3eadb5b8f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the half-frequency divide-by-two behavior and describes alternating sampling and charge holding. The extra ring/oscillator and latch terminology is imprecise, but does not change the essential dynamic-divider analysis.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 10775,
        "total_tokens": 11901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1126,
        "output_tokens": 10775,
        "total_tokens": 11901,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9727,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the figure is\n\nIt is a **single feedback loop** (the bottom wire feeds the right‑hand end back to the left‑hand end) that contains **three inverters** and **two ideal, clock‑controlled pass‑switches in series**, driven by complementary phases `CK` and `CK̄`. The two switches split the ring into two half‑paths:\n\n* **Left half‑path** (left node → `CK` → `Inv₁` → node C): contains **1** inverter.\n* **Right half‑path** (node C → `CK̄` → inv₂ → inv₃ → left node): contains **2** inverters.\n\nSo the closed ring has **3 (odd)** inversions, but it is *never* actually closed, because `CK` and `CK̄` are complementary – at any instant at least one switch is open. That is the key point: the odd‑inversion ring **cannot free‑run/oscillate**; the complementary switches make it behave as a clocked memory element instead. (If the two switches were ever allowed to close together, the 3‑inverter loop would race into a ring‑oscillator state – which is exactly what non‑overlapping clocks must prevent.)\n\nLet the left feedback node be the output **Q**. Node C is the output of `Inv₁`; node D is the input of the second‑stage inverter. Because the right‑hand two inverters are an even (buffer) path, `Q = D` whenever D is driven, and D *holds* its charge when its switch is open (standard dynamic‑latch behaviour). The same holds for B/C on the left.\n\n## Phase‑by‑phase operation\n\n| Phase | CK | CK̄ | B (in of Inv₁) | C (out of Inv₁) | D (in of inv₂) | Q |\n|-------|----|----|----------------|------------------|----------------|-----|\n| CK high | 1 | 0 | = Q (driven) | = **Q̅** (driven) | **hold** | **hold** |\n| CK low  | 0 | 1 | **hold** | **hold** (= Q̅) | = C (driven) | ← C = **Q̅** (updates) |\n| dead (off) | 0 | 0 | hold | hold | hold | hold |\n\n* In the **CK‑high** phase the left half conducts: C is pre‑charged/updated to `Q̅`, while Q (and D) are latched and do **not** change.\n* In the **CK‑low** phase the right half conducts: C holds at `Q̅`, that value is transferred through the two‑inverter buffer to Q, so **Q ← Q̅**.\n* In the dead time (both switches open, the state drawn in the figure) both storage nodes float and hold – the safe, race‑free quiescent state.\n\n## Resulting function\n\nAfter each complete clock period `Q(next) = Q̅(current)`, i.e. **Q toggles on every clock cycle** (the transition of Q happens during the CK‑low / CK̄‑high phase, the transition of C during the CK‑high phase – a two‑phase, master–slave‑like latched operation).\n\nTherefore the arrangement is a **T (toggle) flip‑flop / divide‑by‑2 element**: with no external data input it produces a square wave on Q (or C) at **f_QK/2**. The odd total inversion (1 in the conducting half of one phase + 2 in the conducting half of the other = 3) is what forces the toggle; an even total would have given a static 1‑bit memory that holds its value.\n\n## Design constraints this imposes\n\n* `CK` and `CK̄` must be **non‑overlapping** (otherwise the odd loop closes and oscillates) and must have a dead time, which is the stable holding state shown.\n* The CK‑high phase must last at least the delay of `Inv₁` so that C settles to `Q̅` before the next phase.\n* The CK‑low phase must last at least the delay of the **two series inverters** so that Q settles to the new value before CK rises again.\n\nIn short: a complementary‑clocked, three‑inverter feedback ring whose two clocked switches keep it from oscillating, thereby realising a **1‑bit toggle / frequency‑÷2 sequential element**.",
        "format": "markdown",
        "sha256": "00a62d92b6a12fe760a529ed7c343d787192bc23d45dc18021f7802acc4f79cf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies a dynamic-latch divide-by-two and explains its alternating sample/hold operation and output toggling at half the clock frequency. This satisfies the full-credit rule; the extra internal-path details are secondary.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1126,
        "output_tokens": 9264,
        "total_tokens": 10390,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1126,
        "output_tokens": 9264,
        "total_tokens": 10390,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8276,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**What the red inverter is doing topologically.** Its input is tied to the *CK* node on the *input* side of the first switch, and its output is tied to the *CK̄* node on the *output* side of `Inv_1`. So it sits **in parallel** with the series path `switch1 → Inv_1`, and it is the *second* driver of the CK̄ net. In steady state both drivers produce the same logical value (NOT CK), so the **logic function of the circuit does not change** – the red inverter is logically redundant. Its influence is therefore purely on *timing / electrical* performance.\n\n**Effect on timing (the important part).** Because the red inverter is tapped *before* `switch1` while `Inv_1` is tapped *after* it, the two drivers of the CK̄ node have **different delays**. Consequences:\n\n- *Setup is not improved.* The latest (settled) edge of the CK̄ net is still set by the slower `Inv_1` path, so the critical/maximum‑arrival time – and hence the setup margin of the downstream path (`switch2 → Inv_2 → Inv_3`) – is essentially unchanged. The red inverter does not shorten the slow path.\n- *Hold is degraded / a glitch is introduced.* The red inverter begins to pull the CK̄ node earlier than `Inv_1` does, so during the transition the two drivers are momentarily at opposite values (red driving one rail while `Inv_1` is still driving the other). This produces contention and a mid‑rail excursion (a glitch) on the CK̄ net, and in STA terms it moves the *earliest* arrival earlier while the *latest* arrival stays put – i.e. it **widens the min–max arrival window**, which is exactly the signature of a *hold* risk. The clean, valid edge only appears once the later driver settles, so the usable edge is not earlier; you just get a longer ambiguous/glitchy window.\n- *Gating is bypassed.* Because the red path connects CK straight to the CK̄ node, that net is now driven even when `switch1` is supposed to isolate the `Inv_1` path, so the intended enable/phase behaviour of the switch is partially defeated.\n- *Extra cost.* One more inverter toggling every clock adds dynamic power and adds load to the CK node (slightly slowing its edge).\n\n**Bottom line.** The red inverter does **not** change the function and does **not** speed up the critical (setup) path. As drawn, with its delay mismatched to the `Inv_1` path, it *reduces* performance/timing margin: it tightens hold, creates a contention glitch on the CK̄ net, bypasses the `switch1` gating, and burns extra power. It would only be a *net benefit* if it were deliberately used as the primary, lower‑latency driver of the CK̄ net (reducing clock skew/latency) **and** its delay were matched to the `Inv_1` path so the two edges coincide – in that special case it acts as a stronger, faster double‑driver. Otherwise it is a redundant inverter that hurts timing rather than helping it.",
        "format": "markdown",
        "sha256": "b07c8595d698fc0a8c5b6616d48e750dca0ca792755084b4426ed18f1af37a3b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the branch’s connections and that it bypasses the switch and Inv1, but reaches the opposite conclusion: the branch is a feedforward path that improves high-speed operation, while its unclocked behavior raises the minimum usable clock frequency at low rates. The answer instead treats it as redundant and attributes performance loss to STA-style hold and glitch effects.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 10410,
        "total_tokens": 11389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 10410,
        "total_tokens": 11389,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9702,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the red inverter actually does topologically\n\nLabel the left node **A = CK** and the middle node **B = CK̄**. The red inverter is wired from **A → B**, i.e. it sits **in parallel with the series path (switch₁ + Inv₁)** and *bypasses switch₁ entirely*. Both drivers on node B implement the same function (B = NOT CK), so this is a *parallel* driver, not a new series stage, and the two drivers never fight (no DC contention or logic glitch – at most the node edge is set by the faster of the two).\n\nBecause the bottom wire feeds the output of the last inverter back to node A, the black chain is an **odd‑inverter ring (oscillator)**, and the red inverter is an extra parallel path inside that ring. Its effect on \"performance\" is therefore a change in the loop timing / oscillation behaviour, which can be broken down as:\n\n1. **Faster / lower‑delay CK→CK̄ transition.** The A→B delay becomes `min(t_red , t_sw1 + t_inv1)`. The red inverter adds drive (halves the effective output resistance at B if it is sized like Inv₁), so the CK̄ node edge is cleaner and quicker, and that stage's delay is set by the red inverter rather than by Inv₁ + the switch. This tends to **shorten** the A→B stage.\n\n2. **Extra capacitive load on the CK node.** The red inverter's gate capacitance is added in parallel at node A, increasing the load that the preceding driver (the last inverter, through the feedback wire) must charge/discharge. This tends to **lengthen** the feedback stage's delay and can slow/degrade the CK edge.\n\n3. **Net effect on oscillation frequency.** The ring period is `T = 2·(t_{A→B} + t_{sw2} + t_{inv2} + t_{inv3})`. The red inverter *reduces* `t_{A→B}` but *increases* `t_{inv3}`; the resulting shift in frequency depends on the relative sizing. In a symmetric design the two partly cancel (modest frequency change), but the important qualitative change is that the A→B delay is now the red inverter's own delay, **decoupled from switch₁**.\n\n4. **Changes when the ring oscillates.** With switch₁ *open*, the only A→B path is the red inverter, so the loop A→B→…→A (red inv + Inv₂ + Inv₃ = 3 inverters) is still closed and the circuit **keeps oscillating**. Without the red inverter, opening switch₁ would break the loop and stop oscillation. So the red inverter makes the oscillation independent of that switch.\n\n5. **If CK / CK̄ are treated as two clock phases** (timing‑signoff view), the red inverter is a second, lower‑latency route from CK to CK̄, so the effective clock skew between them becomes the *minimum* of the two paths – it can either remove a setup/hold margin problem on the slow path or, if the fast path was the one used for hold, it changes which path is critical.\n\n### Bottom line\nThe red inverter is a **parallel CK→CK̄ inverter that bypasses the first switch**. It adds drive to the CK̄ node (faster edge, smaller A→B delay) and adds gate load to the CK node (slower feedback stage), with no logic contention. The combined effect is a **change in the ring's loop delay and hence its oscillation frequency/quality**, and it also **keeps the feedback loop closed (so the ring still oscillates) even when the first switch is open**. The exact direction of the frequency shift depends on the relative sizing of the red inverter versus Inv₁/Inv₃; with equal sizing the parallel‑drive speed‑up and the added load roughly trade off, leaving the dominant effect being the switch‑independent, lower‑resistance CK→CK̄ path.",
        "format": "markdown",
        "sha256": "8eff7c275e0ecc813871f6bf623846d95a05323b469a608ba2915bd0eb819f26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes a bypass path that can speed the transition and notes a possible inverter loop. However, it wrongly treats the path as a noncontending parallel driver and misses the key low-frequency drawback: the unclocked branch can fight Inv1 and corrupt division, raising the minimum usable clock frequency.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 9144,
        "total_tokens": 10123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 9144,
        "total_tokens": 10123,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8256,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**What the red device is doing topologically**\n\nTrace the nets: the bottom wire ties the output of the right‑most inverter back to the left end of the chain, so the whole thing is a *closed feedback loop* (a ring / clocked delay loop). The two `o‑/o` symbols are complementary pass‑gates (a clocked mux) controlled by `CK` and `CK̄`.\n\nNow look at the red inverter:\n\n* its **input** is tapped at the node *before* `Inv₁` (call it **A** – the loop's input / feedback node), and\n* its **output** is tapped at the node *after* `Inv₁` (call it **C** – the input of the `CK̄` gate).\n\nSo the red inverter is **in parallel with the first clocked stage** (the `CK` pass‑gate + `Inv₁`), and it drives node **C** with an *always‑on, un‑gated* inverter. That is the key to its effect on performance.\n\n**Effect on performance**\n\n1. **Speed / maximum frequency (the main penalty).** Node **C** is now driven by *two* inverters: the red one (input = A) and `Inv₁` (input = B). They agree only while the `CK` gate is closed (B = A). While `CK` is open, B is not tied to A, so the two drivers can produce opposite logic levels on **C** → **driver contention**. Contention raises the effective resistance on the node and slows its edge, i.e. it *increases the propagation delay of that node*. Because this node sits on the feedback loop, the total round‑trip (loop / critical‑path) delay grows, so the **maximum clock / oscillation frequency drops** (minimum period increases by roughly one inverter‑plus‑contention delay). In short, an extra inverting stage has been inserted into the loop, and the loop delay – and hence the speed limit – is set by it.\n\n2. **Power.** One more inverter is switching every cycle, and during the contention half‑cycle there is extra short‑circuit (crowbar) current. So **dynamic power increases**.\n\n3. **The trade‑off (why anyone would put it there).** The flip side of always‑driving **C** is that the node is *never left floating*: without the red inverter, **C** (=`Inv₁` output) would float whenever the `CK` gate is open, which is a hazard. So the red inverter *holds/defines* the node and improves signal integrity – but it buys that robustness at the cost of the added loop delay and the extra power above.\n\n**Bottom line:** the red inverter puts an extra, un‑gated inverter in parallel with the clocked first stage. Its net effect on performance is a **larger loop/critical‑path delay (lower f_max) and higher dynamic power**, partially offset by the fact that it keeps the intermediate node from floating. If the loop is meant to oscillate, the period is increased by about the delay of this added stage (minus any pass‑gate delay it happens to bypass), i.e. the ring runs slower and dissipates more.",
        "format": "markdown",
        "sha256": "c14b6ef7279ab5875742f36380d36a8c011e5e1fabdfe78dea5bc47d74576ff0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes an always-on path in parallel with the clocked stage, but reaches the opposite performance conclusion: the red inverter bypasses part of the latch path and improves high-speed operation. The key drawback is a higher minimum usable clock frequency at low rates, not reduced maximum frequency or a cure for a floating node.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 979,
        "output_tokens": 12897,
        "total_tokens": 13876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 979,
        "output_tokens": 12897,
        "total_tokens": 13876,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12193,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: I do not agree with the answer as written.** The functional *intuition* (it helps against leakage, so you don't have a minimum clock frequency) is on the right track, but the *mechanism* it gives — \"a cross‑coupled latch with Inv1\" — is wrong, and the red inverter is **not** a latch.\n\n**Why it can't be a cross‑coupled latch**\n\nLook at which nets the two inverters actually sit between:\n\n| net | connected to |\n|---|---|\n| `CK` (left node) | feedback line from Inv3 out · switch 1 (→ Inv1 in) · **red inv. in** |\n| `CK̄` (mid node) | Inv1 out · switch 2 (→ Inv2 in) · **red inv. out** |\n\nSo\n\n* Inv1 : in = `CK`, out = `CK̄`\n* red inverter : in = `CK`, out = `CK̄`\n\nThey have the **same input node and the same output node** — i.e. the red inverter is wired **in parallel** with Inv1 (a \"chord\" across that one stage of the ring), not cross‑coupled. A cross‑coupled pair would require the red inverter's input to be on `CK̄` and its output on `CK` (the opposite direction). It isn't.\n\nThe decisive point: there is **no feedback loop** between the two inverters. Inv1's input is `CK`, not `CK̄`, so the red inverter's output never feeds back to either inverter's input. The red inverter is therefore purely combinational — `out = NOT(CK)` at every instant — and has **no memory**, which is exactly what disqualifies it from being a latch. And if it *were* truly cross‑coupled with Inv1, the two nodes would latch into one of two stable states and the ring would **stop oscillating** — the opposite of what the quoted answer claims.\n\n**The actual role of the red inverter**\n\nIt is an always‑on inverter in parallel with Inv1, i.e. a **buffer / one‑sided keeper on the `CK̄` net**:\n\n* It drives `CK̄ = NOT CK` directly, adding drive current to that transition (so the stage is never left to a single, possibly weak/leaky inverter).\n* Because it is *not* behind a switch, it keeps `CK̄` at a valid logic level even when Inv1 is the gated/weak element. That continuous reinforcement is what fights the leakage on `CK̄`, and that is the genuine reason the node no longer imposes a minimum clock frequency.\n\nSo the red inverter is a **parallel keeper/buffer that holds `CK̄` valid against leakage** — not a bistable cross‑coupled latch. The quoted answer got the *keeper* consequence right but misidentified the *structure*: parallel ≠ cross‑coupled, and a parallel inverter has no memory, so it cannot be (or be used as) a latch. (If the designer really wanted a latch there, the red inverter's connections would have to be swapped — input to `CK̄`, output to `CK` — which would then, as noted, kill the oscillation.)",
        "format": "markdown",
        "sha256": "44b7c8a84a3b4260fb7b8f9223ab5e8d90206f8e6743bf602390c2694027339c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly rejects the cross-coupled-latch interpretation, but misstates the connections and calls the red inverter a parallel keeper. The actual branch is feedforward, bypasses part of the latch path, can help at high speed, and can corrupt operation at low clock rates.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1028,
        "output_tokens": 14330,
        "total_tokens": 15358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1028,
        "output_tokens": 14330,
        "total_tokens": 15358,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13602,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: I disagree with the *mechanism* stated (the \"cross‑coupled latch with `Inv1`\" part). The *effect* the student quotes – removing the minimum‑clock‑frequency limit – is real, but it is produced in a different way, and `Inv1` is not part of the storage pair.**\n\n### Why it is *not* cross‑coupled with `Inv1`\n\nA cross‑coupled (bistable) pair requires the two inverters' **outputs to feed the other's inputs**, giving two distinct storage nodes (Q, Q̅). Look at what is actually connected:\n\n* `Inv1`: input = the node *behind* the `CK` switch (call it B), output = the internal node (call it X).\n* Red inverter: input = the left / feedback node (call it Y), output = **the same node X**.\n\nSo the red inverter and `Inv1` share an *output* node, and the red inverter's input comes from the far side of the circuit, not from `Inv1`'s output. Tying two inverter outputs to one node does not create a latch – it just gives two drivers of the same net (and when the `CK` switch is closed they even drive the *same* value, i.e. they are redundant parallel drivers there). There is no second storage node on the `Inv1` side, and no feedback from the red inverter into `Inv1`'s gate. Hence `Inv1` and the red inverter cannot be the cross‑coupled pair.\n\n`Inv1`'s real job is the **input / write inverter**: it is the inverter that the clocked switch drives, and its *input* (node B) is exactly the node that is left floating when the switch opens – the node that would otherwise leak and impose a minimum refresh rate.\n\n### The actual role of the red inverter\n\nThe two storage nodes of this circuit are the internal node **X** (output of `Inv1`) and the feedback node **Y** (the left node brought back around by the bottom wire). The cross‑coupled latch that *stores* the bit is formed by\n\n* the **red inverter**, which drives X from Y, and\n* the **inverter / inverter chain on the right** (the one whose output is fed back to Y through the bottom wire), which drives Y from X.\n\nThe red inverter is therefore the **keeper / hold inverter** of that storage loop, not of any pair with `Inv1`.\n\nWhen the `CK` switch is open, B is disconnected and would drift through leakage, taking X (and the stored value) with it – that drift is what creates the minimum‑frequency requirement. The red inverter removes this because X is no longer left to `Inv1`'s floating input: it is actively, strongly driven from Y, and Y is itself held by the active feedback inverter. The stored level is thus regenerated/kept by an always‑on inverter for an arbitrary hold time, so the clock no longer has to come back within a leakage‑limited window.\n\n### Verdict\n\n* \"Acts as a keeper\" – ✅ correct.\n* \"Forms a cross‑coupled latch with `Inv1`\" – ❌ incorrect; the cross‑coupling is between the red inverter and the right‑hand feedback inverter, with storage nodes X and Y. `Inv1` is the input stage whose disconnected gate the keeper protects.\n* \"Removes the minimum clock‑frequency requirement due to leakage\" – ✅ correct in effect, but for the reason above (active hold of the internal node from the feedback side), not because `Inv1` becomes a latch element.",
        "format": "markdown",
        "sha256": "652f03ed6d57c42c506aff7444eb6ef174263954abf853e1c711cc0ba262df91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the red inverter as a keeper in a cross-coupled storage loop and claims it removes the minimum-frequency limit. In fact, it is an unclocked feedforward branch that can improve high-speed operation but can overpower the intended latch behavior at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1028,
        "output_tokens": 16701,
        "total_tokens": 17729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1028,
        "output_tokens": 16701,
        "total_tokens": 17729,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15897,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer: No – I would not accept that explanation. The connection shown does not make a cross‑coupled latch, so the red device is not a keeper and it does not remove the leakage‑induced minimum‑frequency constraint.**\n\n**Tracing the connections**\n\nLabel the node to the left of the `CK` switch (the loop‑back node, i.e. the output of the last inverter) **A**, and the node between `Inv1` and the `CK̄` switch **B**.\n\n* `Inv1`: input = A (via the `CK` switch), output = B.\n* Red inverter: input = A (the left red wire goes down to the same left‑hand node), output = B (the right red wire goes down to the same node after `Inv1`).\n\nSo **both inverters have the same input (A) and the same output (B)** – they are in *parallel*, not cross‑coupled. A cross‑coupled (bistable) pair would require positive feedback, i.e. the partner inverter would have to go **B → A** (input at the post‑`Inv1` node, output at the CK node), giving the loop A→`Inv1`→B→red→A with even inversion. As drawn the red inverter provides *no* feedback path from B back to A; the two devices simply reinforce each other. There is therefore no bistability, no storage, and no \"keeper\" action.\n\n**Consequence for the leakage / minimum‑frequency claim**\n\nA keeper removes the minimum‑frequency problem by *actively holding* the storage node while the cell is in hold mode, so leakage cannot drift it. With the wiring shown, in the gated‑off state (both switches open) the chain A → `Inv3`/`Inv2` (floating input) and A → red → B is just a string of inverters with floating inputs – every node still drifts under leakage. The red inverter holds nothing, so the leakage‑induced minimum clock frequency is **not** eliminated. (The *general* statement that a proper keeper would do this is fine – the error is that the red inverter here is not wired as one.)\n\n**What the red inverter actually does**\n\nAs drawn it is simply an *ungated* inverter from A to B, placed in parallel with the (`CK` switch + `Inv1`) branch. Its real effects are:\n\n1. It forces node B to equal Ā = A̅ continuously, **overriding / shorting out the `CK` gate** – the `CK` switch no longer controls node B.\n2. It keeps that branch of the feedback loop permanently closed, so it just acts as an always‑on inverter stage *inside the ring* (the loop A→red→B→`CK̄`→`Inv2`→`Inv3`→A is still an odd number of inverters and oscillates). It is part of the oscillator's feedback path, not a memory element.\n\n**What a real keeper would look like**\n\nTo actually function as the keeper the answer describes, the inverter would have to be (a) *cross‑coupled* – input tapped at node B, output driven to node A – forming the positive‑feedback pair with `Inv1`, and (b) made *weak* so it only holds the value when the pass path is off and does not fight the normal logic. Neither condition is met by the inverter shown.\n\nSo the proposed answer gets the *motivation* for a keeper right in the abstract, but misreads the topology: the red inverter is in parallel with `Inv1`, not cross‑coupled to it, and therefore is not a keeper and does not remove the minimum‑frequency requirement.",
        "format": "markdown",
        "sha256": "5bb5e19a3794751627d847f9c28867f63202c5c9b46fa7aedb5c970f6b0b3f22"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies an ungated path from the pre-switch node to Inv1’s output, but claims it continuously overrides the CK path rather than explaining its feedforward predrive and its interaction with the dynamic latch. It misses the key tradeoff: faster high-speed operation but a higher minimum usable clock rate at low frequencies.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1028,
        "output_tokens": 12313,
        "total_tokens": 13341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1028,
        "output_tokens": 12313,
        "total_tokens": 13341,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11501,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. What the input node \"sees\"\n\nAC‑ground the $V_{DD}$ and ground rails and label the gate node (left of $R_F$) $v_g$ and the drain node (right of $R_F$) $v_d$. Drive the gate node with a test current $i_t$ (the $R_{in}$ arrow). The gates draw no current, so the only path out of the gate node is $R_F$:\n\n$$i_t=\\frac{v_g-v_d}{R_F}$$\n\nThe drain node is a high‑impedance output (no load drawn), so the current that $R_F$ feeds into it must be absorbed by the two transistors. Both have $v_{gs}=v_g$ (M1 source at 0, M2 source at $V_{DD}$ = AC ground), hence\n\n$$\\frac{v_g-v_d}{R_F}=g_{m1}v_g+g_{m2}v_g=g\\,v_g,\\qquad g\\triangleq g_{m1}+g_{m2}$$\n\nTherefore $i_t=g\\,v_g$ and\n\n$$\\boxed{R_{in}=\\frac{v_g}{i_t}=\\frac{1}{g_{m1}+g_{m2}}}$$\n\n**Key point:** $R_{in}$ depends *only* on the sum of the transconductances, **not on $R_F$**. So the matching condition\n\n$$R_{in}=50\\ \\Omega \\;\\Rightarrow\\; g_{m1}+g_{m2}=\\frac{1}{50}=20\\ \\text{mS}$$\n\npins down $g$, and **$R_F$ is a free variable** that you may use purely to optimise the noise (and the gain). You cannot \"trade\" $R_F$ against $g$ to keep $R_{in}=50$ – that degree of freedom does not exist.\n\n## 2. Noise figure\n\nThe internal noise has two sources: the channel (thermal) noise $4\\gamma kT\\,g$ of the parallel pair (effective $\\gamma_{eff}=(\\gamma_1 g_{m1}+\\gamma_2 g_{m2})/(g_{m1}+g_{m2})$) and the thermal noise $4kT/R_F$ of the feedback resistor. Referring both to the *source* (the stage gain from $v_s$ to $v_d$ is $A_s=(1-gR_F)/(1+gR_s)$) gives\n\n$$F=1+\\frac{(1+gR_s)^2}{R_s(1-gR_F)^2}\\Big[\\gamma_{eff}\\,g\\,(R_F+R_s)^2+R_F\\Big]$$\n\nWith the matching constraint $gR_s=1$ this becomes\n\n$$F=1+\\frac{4}{(1-gR_F)^2}\\left[\\frac{\\gamma_{eff}(R_F+R_s)^2}{R_s}+\\frac{R_F}{R_s}\\right]$$\n\nTwo observations:\n\n* The term $\\dfrac{4\\,\\gamma_{eff}(R_F+R_s)^2/R_s}{(1-gR_F)^2}$ is the **channel‑noise** contribution; the factor $4=(1+gR_s)^2$ is the unavoidable penalty of matching a $1/g$ input to $50\\ \\Omega$ through gate–drain feedback (the source halves the signal at the gate).\n* The term $\\dfrac{4\\,R_F/R_s}{(1-gR_F)^2}$ is the **$R_F$ thermal‑noise** contribution.\n\nBoth terms approach their minimum as $R_F$ is pushed to its extremes, and $F$ has a maximum (→∞) at $R_F=1/g=50\\ \\Omega$ (zero gain). Hence, over the usable range, the noise‑figure floor is reached for **large $R_F$**, where $R_F$'s own thermal noise is divided away by the high gain:\n\n$$\\boxed{F_{min}=1+4\\,\\gamma_{eff}}$$\n\n## 3. Optimisation (with $R_{in}=50\\ \\Omega$ held)\n\nYou have three levers; the constraint fixes only $g_{m1}+g_{m2}=20$ mS.\n\n1. **Allocation of $g_m$ between M1 and M2.** Because only the sum is fixed, minimise $\\gamma_{eff}=(\\gamma_1 g_{m1}+\\gamma_2 g_{m2})/g$. This is linear in the split, so the optimum is to put **all of the 20 mS into the transistor with the smaller $\\gamma$** (longer channel / better device) and bias the other off. If $\\gamma_1=\\gamma_2$, the split is irrelevant to NF – take $g_{m1}=g_{m2}=10$ mS for symmetric headroom and linearity.\n\n2. **Value of $R_F$.** Make $R_F$ **as large as stability and the required voltage gain allow**. A large $R_F$ (i) does not change $R_{in}$, (ii) gives the stage its gain, and (iii) drives the $R_F$ thermal‑noise term to zero, so $F\\to1+4\\gamma_{eff}$. $R_F$ must stay finite and below the stability limit (the gate–drain feedback path), and it must keep the DC operating point valid – but since no DC gate current flows, $R_F$ can be very large without disturbing the bias.\n\n3. **Device $\\gamma$.** Reduce $\\gamma_{eff}$ by using longer‑channel devices for the biased transistor.\n\n**Resulting minimum noise figure** (with the $50\\ \\Omega$ match):\n\n$$F_{min}=1+4\\,\\gamma_{min}\\;\\approx\\;1+4\\!\\cdot\\!\\tfrac{2}{3}\\approx 3.7\\quad(\\approx 5.6\\ \\text{dB for long‑channel devices})$$\n\n> Note on convention: if your course refers the noise to the *gate* node rather than to the source, the source‑divider factor $(1+gR_s)^2=4$ does not appear and the floor reads $F_{min}=1+\\gamma_{min}$. The optimisation conclusions (fix $g_{m1}+g_{m2}=20$ mS, allocate $g_m$ to the lower‑$\\gamma$ device, maximise $R_F$ within the stability limit) are identical either way.\n\n**In short:** hold $g_{m1}+g_{m2}=20$ mS to keep $R_{in}=50\\ \\Omega$; bias that $g_m$ into the lower‑$\\gamma$ device; and set $R_F$ as large as stability permits. $R_F$ is your gain/knob, not your matching element.",
        "format": "markdown",
        "sha256": "ca2ec417d4034351c047fa894191d64bb714cdca09f70a3fb03a40ded7d1ebb3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer assumes output resistance is irrelevant, so it fixes total gm at 1/50 Ω and treats RF as unable to adjust the match. This misses the key finite-ro relation that permits gm to exceed 1/Rs, with RF increased to preserve Rin and NF reduced below 1 + γ. It recognizes the inverter LNA and relevant noise sources, but its central optimization conclusion is wrong.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2074,
        "output_tokens": 37575,
        "total_tokens": 39649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36035,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2074,
        "output_tokens": 37575,
        "total_tokens": 39649,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 36035,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the circuit really is\n\nAfter $C_1$ the input node drives the **gates of both $M_1$ and $M_2$**, and $R_F$ ties that node to the **drains of both** devices. $M_1$ (NMOS, source at gnd) and $M_2$ (PMOS, source at $V_{DD}$) are therefore two common‑source amplifiers in parallel, with their gates tied together and their drains tied together. The whole stage is equivalent to a *single* CS amplifier with\n\n$$g_m = g_{m1}+g_{m2},\\qquad r_o = r_{o1}\\parallel r_{o2},\\qquad v_{n,ch}^2 = 4kT(\\gamma_1 g_{m1}+\\gamma_2 g_{m2})$$\n\nplus a gate‑to‑drain (shunt‑shunt) feedback resistor $R_F$. $M_2$ is not redundant: because the gate node draws no DC current, the DC voltage at the input node equals the DC drain voltage (diode‑like self‑bias), and $M_2$ is the only DC path that can feed the drain node from $V_{DD}$, so it supplies the bias current that $M_1$ sinks.\n\n## What the 50 Ω constraint does to the bias\n\nLooking into the input node (the arrow $R_{in}$) gives\n\n$$R_{in}=\\frac{R_F+r_o}{1+g_m r_o}\\;\\approx\\;\\frac{1}{g_m}\\left(1+\\frac{R_F}{r_o}\\right)\\;\\approx\\;\\frac{1}{g_m}$$\n\nso the matching condition **pins the total transconductance**:\n\n$$g_{m1}+g_{m2}\\;\\approx\\;\\frac{1}{50\\ \\Omega}=20\\ \\text{mA/V}$$\n\nThis is the crucial point: *you cannot change the bias current to reduce the $1/g_m$ noise – the 50 Ω requirement locks $g_m$.* (If $R_F$ is not $\\ll r_o$, then $g_m=(R_F+r_o-50)/(50\\,r_o)$, i.e. increasing $R_F$ forces a *larger* $g_m$ to keep $R_{in}=50$.)\n\n## The noise floor set by that constraint\n\nReferred to the input node, the channel thermal noise of the parallel pair is\n\n$$v_{n,ch,in}^2=\\frac{4kT(\\gamma_1 g_{m1}+\\gamma_2 g_{m2})}{(g_{m1}+g_{m2})^2}\\;\\approx\\;\\frac{4kT\\,\\gamma}{g_m}$$\n\n(the load $R_F\\parallel r_o$ cancels). With $g_m\\simeq 1/R_{in}$ this becomes $4kT\\,\\gamma\\,R_{in}$, so the **thermal noise‑figure floor is**\n\n$$NF_{th,\\min}=1+\\gamma \\;\\approx\\; 2.5\\;(4\\ \\text{dB})\\quad(\\gamma=1.5),\\qquad 1.67\\;(2.2\\ \\text{dB})\\quad(\\gamma=\\tfrac23)$$\n\n*independent of $R_F$ and $r_o$.* Every other noise term and every mismatch only **adds** to this floor. Hence \"optimising for NF with $R_{in}=50$ Ω\" means: keep $g_m$ at the value that gives 50 Ω, and then drive all the *extra* terms toward zero.\n\n## The optimisation levers (and the rules)\n\n1. **Make $R_F$ as large as the band‑width / offset budget allows.**\n   - The input‑referred noise of $R_F$ is $\\approx 4kT\\,R_F\\left(\\dfrac{R_{in}}{R_{in}+R_F+Z_{out}}\\right)^2$, which falls as $1/R_F$ for large $R_F$.\n   - A large $R_F$ also pushes $g_m$ up (via the $R_{in}$ equation), which *lowers* the $4kT\\gamma/g_m$ term.\n   - So NF is a monotonic decreasing function of $R_F$; stop only when the input pole ($R_F$ vs. $C_{gs}$), the offset voltage ($\\Delta V_{gs}$ of the matched pair), or power becomes unacceptable.\n\n2. **Use long‑channel, low‑overdrive devices for $M_1$ and $M_2$.**\n   - Large $r_o$ keeps $R_F/r_o\\to0$, so the $R_{in}$ equation is not distorted and the $r_o$‑related noise term vanishes.\n   - Large $WL$ at fixed $g_m$ minimises the $1/f$ gate noise $\\propto 1/(C_{ox}WL)$.\n\n3. **Choose the $M_1/M_2$ split (the self‑bias point $V_X$, i.e. the $W/L$ ratios) to minimise the extra terms.**\n   Both devices carry the same DC current, so $g_{mi}=2I_D/V_{od,i}$. The combined $1/f$ and the $\\gamma$‑weighted channel noise $\\propto(\\gamma_1/g_{m1}+\\gamma_2/g_{m2})/(\\dots)$ are minimised by allocating transconductance toward the device with the **smaller $\\gamma$ and smaller $1/f$ coefficient** (in many processes the NMOS), while keeping both in saturation and giving $M_2$ just enough overdrive to supply the bias current.\n\n4. **Tune $C_1$ to cancel the reactive part** of the input impedance at the centre frequency, $C_1 = 1/(\\omega_0 C_{in})$ with $C_{in}=C_{gs1}+C_{gs2}+C_{gd}\\dots$, so the input is a *pure* 50 Ω (this removes the matching‑loss term in NF and keeps the conjugate match at the band centre).\n\n## Summary of the procedure\n\n1. Fix $g_{m1}+g_{m2}\\approx 20$ mA/V (this is non‑negotiable – it *is* the 50 Ω). Accept the $\\approx 1+\\gamma$ thermal floor.\n2. Pick long‑channel $M_1,M_2$ (large $r_o$, low $1/f$) and size them so the self‑bias point gives the required $g_m$ and the best $1/f$/$\\gamma$ split.\n3. Choose $R_F$ as large as band‑width/offset permit, to push $R_F$'s own referred noise and the residual $r_o$ term to zero and to nudge $g_m$ slightly higher.\n4. Set $C_1 = 1/(\\omega_0 C_{in})$ for a real 50 Ω at the centre frequency.\n\nThe result is an NF as close as possible to the $1+\\gamma$ (≈ 4 dB for a short‑channel device) floor that the 50 Ω constraint imposes; no choice of bias can do better, and the only thing the design can do is eliminate the *additional* noise contributed by $R_F$, $r_o$, $1/f$, and the reactive mismatch.",
        "format": "markdown",
        "sha256": "ec90831bafeba556abe061e9333d8c3c2ba5e495a6828d3100f669fbeab04efd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "Although it writes the finite-ro input-resistance relation and notes that increasing RF can raise gm, it ultimately treats gm as effectively pinned at 1/Rin and concludes NF cannot beat 1+gamma. That misses the central result: increasing gm while adjusting RF to preserve the match can reduce NF below that limit.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2074,
        "output_tokens": 28191,
        "total_tokens": 30265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2074,
        "output_tokens": 28191,
        "total_tokens": 30265,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26530,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nAfter $C_1$ the two transistors are wired in **parallel** (both gates to the input node, both drains to the output node), so they behave as one composite device with\n\n$$g_m = g_{m1}+g_{m2},\\qquad r_o = r_{o1}\\Vert r_{o2},\\qquad \\gamma_{eq} g_m = \\gamma_1 g_{m1}+\\gamma_2 g_{m2}$$\n\nThe PMOS source is at $V_{DD}$ (a.c. ground) and the NMOS source is at ground, so the pair is a **common‑source** stage whose drain is fed back to its gate by $R_F$. $R_F$ therefore does two jobs: it sets the self‑bias (at d.c. $V_G=V_D$ and $I_{D1}=I_{D2}$, no extra bias network needed) and it sets the input resistance.\n\n## Input resistance and the matching condition\n\nSolving the two‑node small‑signal model (gate node $v$, drain node $v_o$) gives\n\n$$R_{in}=\\frac{r_o+R_F}{1+g_m r_o}$$\n\n(For $R_F\\to\\infty$ this $\\to\\infty$, i.e. the open gate; for $R_F\\to0$ it $\\to1/g_m$, i.e. a diode‑connected device – both limits check out.) The 50 Ω requirement is therefore the constraint\n\n$$\\boxed{\\;\\frac{r_o+R_F}{1+g_m r_o}=50\\;\\quad\\Longleftrightarrow\\quad R_F = 50 + 50\\,g_m r_o - r_o\\;}$$\n\nNote that $R_F$ and $g_m$ are **not independent**: once $r_o$ (device length + bias family) is chosen, raising $g_m$ forces $R_F$ to change if the match is to be kept at 50 Ω. (In the common textbook approximation $R_{in}\\simeq R_F$, this simply means “set $R_F=50\\ \\Omega$ and treat $g_m$ as the free variable.”)\n\n## Noise figure\n\nReferring the three white‑noise sources (channel noise of $M_1$, of $M_2$, and the thermal noise of $R_F$) to the input terminal, with a 50 Ω source, the $r_o$ dependence cancels and one obtains\n\n$$\\boxed{\\;NF = 1 + \\frac{4R_F}{50}\\,\\frac{1+\\gamma_{eq}\\,g_m R_F}{\\left(1-g_m R_F\\right)^2}\\;}$$\n\ni.e. $NF$ is set by two terms: the **channel noise** of the pair (proportional to $\\gamma_{eq}g_m$) and the **thermal noise of $R_F$**.\n\n## How to optimise NF with $R_{in}=50\\ \\Omega$\n\nSubstituting the matching relation into the $NF$ expression shows that, for a given device technology, **both** noise terms fall as the transconductance is increased: the channel term scales $\\sim 1/g_m$, and although $R_F$ grows with $g_m$, the loop gain also grows so that the $R_F$‑noise referred to the input scales $\\sim 1/g_m^3$. Hence $NF$ is monotonic – there is no interior minimum in $g_m$ – and the optimum sits at the **largest feasible transconductance**, limited only by secondary constraints. Concretely:\n\n1. **Maximise the bias current** of the pair (maximise $g_m = g_{m1}+g_{m2}$) while keeping both $M_1$ and $M_2$ in saturation and within the power budget. This is the dominant NF lever.\n2. **Set $R_F$ from the match equation** above, not by eye. Do not force $R_F=50\\ \\Omega$ unless $g_m r_o\\ll1$; otherwise the real part of $R_{in}$ will drift off 50 Ω.\n3. **Choose the $M_1/M_2$ split** for the smallest $\\gamma_{eq}g_m$: put more $g_m$ in the device with the smaller $\\gamma$ (and use longer channels / better devices for the higher‑$g_m$ device to push the $1/f$ corner down). The parallel pair also lets you place the gate bias at a comfortable mid‑rail voltage without an extra bias network.\n4. **Mind the size–capacitance trade‑off.** $g_m$ can be raised either by bias current or by width $W$; widening the devices raises $C_{gs}$, which appears in parallel at the input and degrades the 50 Ω match at high frequency (the circuit has no inductor to neutralise it). So for a given operating band, pick the largest $g_m$ that still keeps $\\omega C_{gs}$ small enough that the real‑part match stays at 50 Ω over the band.\n\n**Bottom line:** with the input match tied to the feedback network, the NF is minimised by driving the composite transconductance as high as power, saturation, $1/f$ and the input‑capacitance/bandwidth limits allow, using $R_F$ only to satisfy $(r_o+R_F)/(1+g_m r_o)=50\\ \\Omega$, and using the $M_1/M_2$ ratio and channel lengths to minimise $\\gamma_{eq}$ and the flicker corner. The residual $NF$ floor is then set by the thermal noise of the 50 Ω match element ($R_F$) and the best achievable $\\gamma_{eq}$.",
        "format": "markdown",
        "sha256": "c0e7b35705893a74d548a9462d344582dfdf0a38e3dcf058e4fec6d65ee06c6c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It uses the finite-output-resistance input-match relation and recommends increasing gm while adjusting RF to preserve 50 Ω, allowing NF to fall below 1 + gamma. This meets the golden solution’s full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 2074,
        "output_tokens": 27522,
        "total_tokens": 29596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1664,
        "input_tokens": 2074,
        "output_tokens": 27522,
        "total_tokens": 29596,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 26244,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Identifying the input node\n\nNode **P** (the node to which $I_{in}$ is applied and across which $C_{in}$ is connected) is wired **only** to the **gate** of $M_1$. No resistor, transistor channel, or other element ties this node to ground or to any other part of the circuit. The feedback network ($R_F$, $M_2$, $M_3$, $R_{D2}$) is attached to the *source* and *drain* of $M_1$ and to the output node $V_{out}$ – none of these is connected back to the gate node P.\n\n## Consequence for the input resistance\n\nA MOSFET gate carries no conduction current (DC or small‑signal). Because the only thing connected to node P, besides $C_{in}$ and the test source $I_{in}$, is that open‑circuit gate, there is **no resistive path** from P to ground anywhere in the circuit. Hence the small‑signal resistance looking into the amplifier is\n\n$$R_{in} = \\frac{v_P}{i_{in}} \\;\\to\\; \\infty$$\n\nThe feedback loop cannot change this: the feedback is taken to the *source* of $M_1$ (series mixing at the input), so the input resistance would be multiplied by $(1+T)$, but $(1+T)\\cdot\\infty = \\infty$. The elaborate $M_2$–$M_3$–$R_F$ network therefore has **no effect** on the input impedance – it only sets the bias and the output impedance.\n\n## Input impedance\n\nThe only element presenting a finite impedance at node P is $C_{in}$. With $R_{in}=\\infty$ in parallel with it,\n\n$$\\boxed{Z_{in}(s) = \\frac{1}{s\\,C_{in}}} \\qquad\\text{or}\\qquad Z_{in}(j\\omega)=\\frac{1}{j\\omega C_{in}}$$\n\ni.e. the input is purely capacitive; the input *resistance* is infinite (an open circuit). If $C_{in}$ is neglected, the input is simply an open circuit.\n\n**Key point:** because the signal is applied to a MOSFET gate, the input impedance is set entirely by $C_{in}$, regardless of the feedback network.",
        "format": "markdown",
        "sha256": "cb24d65b7bfa8b3ae86f42f99fe01ca6fef0b6d17696e784c27e029bac716c56"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer misidentifies the feedback connection and concludes the input is an open circuit. The feedback resistor gives a finite input resistance: Rin = (RF + RD2)/(1 + A0), with A0 the unloaded amplifier gain.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 8769,
        "total_tokens": 8994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 8769,
        "total_tokens": 8994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8246,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Identifying the feedback type\n\nThe feedback resistor $R_F$ connects the **output node** $V_{out}$ (a voltage node) back to the **input node** $P$ (the gate of $M_1$, where the signal current $I_{in}$ is injected). This is a **shunt–shunt (current‑in / voltage‑out)** feedback connection, so the input impedance is *reduced* by the factor $(1+L)$.\n\nThe MOS gate is open‑circuited, so the only DC/low‑frequency path from $P$ to ground (with the output shorted for the open‑loop input resistance) is $R_F$ itself. Hence the open‑loop input resistance at $P$ is\n\n$$R_{in0}=R_F$$\n\n## Open‑loop gain $v_o/v_p$ (capacitors open, $r_o$ neglected)\n\n* $M_1$ (common‑source, source at AC ground), with $R_{D1}$ to AC ground at node $X$:\n$$v_X = -g_{m1}\\,R_{D1}\\,v_p$$\n* $M_2$ and $M_3$ share their drain node through $I_{SS}$ (AC open), so $i_{d2}+i_{d3}=0$. With $M_3$ gated at AC ground ($v_{gs3}=-v_o$):\n$$g_{m2}v_X = g_{m3}v_o \\;\\Rightarrow\\; v_o = \\frac{g_{m2}}{g_{m3}}\\,v_X$$\n\nCombining:\n\n$$A_v=\\frac{v_o}{v_p}=-\\,\\frac{g_{m1}\\,g_{m2}\\,R_{D1}}{g_{m3}}$$\n\n## Loop gain and input impedance\n\nFor shunt–shunt feedback the loop gain is $L = A_r\\,H$ with $H=1/R_F$ and $A_r=A_v R_F$, so $L=|A_v|$. The negative feedback reduces the input resistance by $(1+L)$:\n\n$$\\boxed{\\,R_{in}=\\frac{R_F}{1+|A_v|}=\\frac{R_F}{\\,1+\\dfrac{g_{m1}\\,g_{m2}\\,R_{D1}}{g_{m3}}\\,}=\\frac{R_F\\,g_{m3}}{g_{m3}+g_{m1}\\,g_{m2}\\,R_{D1}}\\,}$$\n\nFor a high‑gain amplifier ($g_{m1}g_{m2}R_{D1}\\gg g_{m3}$) this becomes the familiar small value\n\n$$R_{in}\\approx \\frac{R_F\\,g_{m3}}{g_{m1}\\,g_{m2}\\,R_{D1}}\\ll R_F$$\n\n**Note on $C_{in}$:** $C_{in}$ is in parallel at node $P$, so the full small‑signal input impedance is $Z_{in}=R_{in}\\parallel \\tfrac{1}{sC_{in}}$; the resistive input impedance (the quantity $R_{in}$) is the expression above. (The result assumes $r_{o}\\to\\infty$; finite $r_o$ only perturbs $A_v$ slightly.)",
        "format": "markdown",
        "sha256": "2347fbb44072502fe6bb0aa1d90bc190223e7c3fba889053a3eb08b9b4a7afc5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies shunt-shunt feedback and the qualitative reduction in input resistance, but the computed expression misses the output resistance in the feedback path and uses an incorrect amplifier gain. The required result is (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 34537,
        "total_tokens": 34762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33783,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 34537,
        "total_tokens": 34762,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 33783,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Key observation\n\nNode P is the **gate** of $M_1$, so no AC current enters the transistor there. The capacitor $C_{in}$ is a short at signal frequencies. Hence the *only* path for the input current $i_{in}$ is the feedback resistor $R_F$:\n\n$$i_{in}=\\frac{v_P-v_{out}}{R_F}\\qquad\\Longrightarrow\\qquad R_{in}=\\frac{v_P}{i_{in}'}=\\frac{R_F}{1-\\dfrac{v_{out}}{v_P}}=\\frac{R_F}{1-A_v}$$\n\nSo the input impedance is fixed by $R_F$ and the (closed‑loop) voltage gain $A_v=v_{out}/v_P$ of the $M_1\\!-\\!M_2\\!-\\!M_3$ block. $M_1$ is common‑source (gate $=P$, source gnd, drain $=X$), $M_2$ is common‑source (gate $=X$, source gnd, drain $=D_2$), and $M_3$ is common‑gate (gate $=V_b$, drain $=D_2$, source $=V_{out}$); $D_2$ is an AC‑floating node (only $I_{SS}$, $r_{o2}$, $r_{o3}$), which is why the $r_o$'s cannot be dropped.\n\n## Small‑signal nodal solution\n\nWith $v_{gs1}=v_P,\\ v_{gs2}=v_X,\\ v_{gs3}=-v_{out}$ and $Y_1=\\tfrac{1}{R_{D1}}+\\tfrac{1}{r_{o1}},\\ Y_3=\\tfrac{1}{r_{o2}}+\\tfrac{1}{r_{o3}}$:\n\n- **Node X:** $\\;v_X=-\\dfrac{g_{m1}\\,v_P}{Y_1}$\n- **Node $D_2$:** $\\;v_D\\,Y_3=(g_{m3}+\\tfrac{1}{r_{o3}})\\,v_{out}+\\dfrac{g_{m1}g_{m2}}{Y_1}\\,v_P$\n- **Node out:** $\\;-\\dfrac{v_P}{R_F}+v_{out}\\!\\left(\\tfrac{1}{R_{D2}}+\\tfrac{1}{R_F}+g_{m3}+\\tfrac{1}{r_{o3}}\\right)-\\dfrac{v_D}{r_{o3}}=0$\n\nEliminating $v_X,v_D$ gives the gain\n\n$$\\boxed{\\,A_v=\\frac{v_{out}}{v_P}=\\frac{\\dfrac{1}{R_F}+\\dfrac{g_{m1}g_{m2}}{r_{o3}\\,Y_1 Y_3}}{\\dfrac{1}{R_{D2}}+\\dfrac{1}{R_F}+g_{m3}+\\dfrac{1}{r_{o3}}-\\dfrac{g_{m3}+1/r_{o3}}{r_{o3}\\,Y_3}}\\,}$$\n\nand therefore\n\n$$\\boxed{\\,R_{in}=\\frac{R_F}{1-A_v}\\,}$$\n\n## Interpretation / useful limits\n\n* Because $M_3$ is a current conveyor (its drain current equals the $M_2$ drain current set at the floating node $D_2$), the output node is a **low‑impedance** node (≈ $1/g_{m3}\\,\\|\\,R_{D2}$). Consequently $|A_v|$ is modest and $R_{in}$ is of the order of $R_F$ (slightly reduced by the feedback term). In the limit $g_{m3}\\gg 1/R_{D2}$ and large $r_o$'s this reduces to $R_{in}\\approx R_F+\\big(g_{m3}+1/R_{D2}\\big)^{-1}$.\n\n* If the loop gain is made large (e.g. increasing $g_{m1},g_{m2},R_{D1}$), $|A_v|\\!\\gg\\!1$ and $R_{in}\\to R_F/|A_v|$, the expected shunt–shunt (current‑in / voltage‑out) feedback reduction.\n\nSo the practical working formula is **$R_{in}=R_F/(1-A_v)$** with $A_v$ from the nodal expression above; the dominant point is that the MOS gate draws no current, forcing all of $i_{in}$ through $R_F$.",
        "format": "markdown",
        "sha256": "21a5d4616bcd4fdb7936efafff8226655b5113e69119dd6c57d249451cb6f855"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly notes that the MOS gate draws no current and recognizes feedback through RF, but it does not derive the exact Miller result. Its gain/sign analysis and near-RF conclusion are inconsistent with the inverting amplifier, and it fails to give Rin = (RF + RD2)/(1 + A0).",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 50675,
        "total_tokens": 50900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 49628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 225,
        "output_tokens": 50675,
        "total_tokens": 50900,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 49628,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Short answer (the method)\n\nTreat the LDO as an ideal supply plus a series noise voltage $v_s(t)$ whose (one‑sided) PSD is $S_{th}(\\omega_m)$. The phase noise it produces is obtained with **Leenssen's theorem / the phase‑impedance method**:\n\n$$L_{\\phi}(\\omega_m)\\;[\\text{rad}^2/\\text{Hz}] \\;=\\; S_{th}(\\omega_m)\\,\\bigl|H_\\phi(\\omega_m)\\bigr|^2$$\n\nwhere $H_\\phi(\\omega_m)=\\partial\\phi/\\partial v_s$ is the **supply‑to‑phase transfer function** (\"phase‑impedance\" seen from the LDO output). For a slowly varying supply noise this transfer is purely integrative (FM→PM):\n\n$$H_\\phi(\\omega_m)\\;\\simeq\\;\\frac{K_{VS}}{j\\omega_m},\\qquad K_{VS}\\equiv\\frac{d\\omega_0}{dV_s}\\;[\\text{rad}\\cdot\\text{s}^{-1}\\text{V}^{-1}]$$\n\nso that\n\n$$\\boxed{\\,L_{\\phi,LDO}(\\omega_m)\\;\\simeq\\;\\frac{S_{th}(\\omega_m)}{\\omega_m^{2}}\\;K_{VS}^{2}\\,}\\qquad\\text{(one‑sided, rad}^2/\\text{Hz)}$$\n\nor, in the usual dBc/Hz (single‑sided) convention,\n\n$$\\boxed{\\,L_{LDO}(\\omega_m)\\;[\\text{dBc/Hz}] \\;=\\; 10\\log_{10}\\!\\left[\\frac{S_{th}(\\omega_m)\\,K_{VS}^{2}}{2\\,\\omega_m^{2}}\\right]\\,}$$\n\nThis is a $1/f^{2}$ (far‑in) term that adds in **power** to the VCO's intrinsic (core) phase noise: $L_{tot}=L_{core}+L_{LDO}$.\n\n## Why the coupling goes through $K_{VS}$ (FM) in this topology\n\nLook at the small‑signal path at an offset $\\omega_m\\ll\\omega_0$:\n\n1. **The inductors short the noise to the tank.** $Z_{L1}\\approx j\\omega_m L_1$ is tiny, so $v_s$ appears essentially at the top of the tank, i.e. at nodes $X$ and $Y$ (as a *common‑mode* perturbation). The full $S_{th}$ is delivered over the whole offset range of interest (only a divider $Z_{tank}/(Z_{tank}+R_{LDO})$ appears if $R_{LDO}\\sim \\omega_0 L_1$).\n\n2. **No linear differential coupling.** In the differential mode the supply rail is a virtual ground, and the cross‑coupled pair only sees $v_x-v_y$ (the $v_s$ cancels at the gates). Hence the *linear* supply→differential‑phase transfer is zero (ideal CMRR = ∞). A linear term appears only with asymmetry or a finite $R_{LDO}$; then it equals the tank phase‑impedance times the differential fraction $\\beta(\\omega_m)$:\n   $H_{\\phi,lin}\\approx \\dfrac{\\omega_0}{2Q\\,A\\,\\omega_m}\\,\\beta(\\omega_m)$, with $A$ the differential swing and $Q$ the tank $Q$.\n\n3. **The dominant, always‑present path is FM via the voltage‑sensitive tank.** The varactors $M_{v1},M_{v2}$ are referenced to $V_{cont}$ (AC ground), so their terminal voltage is $v_{node}-V_{cont}$, which *common‑modes* with $v_s$. Hence $v_s$ shifts their capacitance, shifting $\\omega_0$: this is exactly $K_{VS}\\,v_s(t)$ of instantaneous frequency error, and $\\phi=\\int \\Delta\\omega\\,dt$ gives the $1/\\omega_m$ factor above. (The inductors are unaffected by the common mode, so they contribute no FM here.)\n\n## Computing $K_{VS}$ from the circuit\n\nWith $\\omega_0=1/\\sqrt{L_{eq}C_{eq}}$ and the varactor voltage $v_{var}(t)=V_{dd}-V_{cont}+v_s+\\tfrac{A}{2}\\cos\\theta$,\n\n$$\\frac{\\partial\\omega_0}{\\partial C_{eq}}=-\\frac{\\omega_0}{2C_{eq}},\\qquad \\frac{d\\langle C_{var}\\rangle}{dV_s}=\\Big\\langle C'_{var}\\big(v_{var}(t)\\big)\\Big\\rangle_{\\theta}$$\n\nso\n\n$$\\boxed{\\,K_{VS}=-\\frac{\\omega_0}{2\\,C_{eq}}\\;\\Big\\langle C'_{var}\\big(v_{var}(t)\\big)\\Big\\rangle_{\\theta}\\,}$$\n\ni.e. the cycle‑average slope of the varactor $C$–$V$ curve (use the instantaneous slope over the whole swing for a large‑signal varactor; for a small swing just evaluate $C'_{var}$ at the DC varactor voltage). Equivalently, obtain $K_{VS}$ directly by sweeping $V_{out}$ in a harmonic‑balance/AC simulation (or by a small supply‑noise injection) and measuring $d\\omega_0/dV_s$ — this single number, squared and multiplied by $S_{th}/\\omega_m^2$, *is* the LDO's contribution to the VCO output phase noise.\n\n## Recipe (summary)\n\n1. Use the LDO's output thermal‑noise PSD $S_{th}(\\omega_m)$ (V²/Hz, one‑sided).\n2. Find the VCO's supply sensitivity $K_{VS}=d\\omega_0/dV_s$ (from the varactor $C$–$V$ data via the box above, or by sim/measure).\n3. Form $L_{LDO}(\\omega_m)=\\tfrac12\\,S_{th}(\\omega_m)\\,(K_{VS}/\\omega_m)^2$ (rad²/Hz) → convert to dBc/Hz as boxed.\n4. Add this term in power to the core phase noise; if $R_{LDO}$ is non‑negligible, multiply $S_{th}$ by $|Z_{tank}/(Z_{tank}+R_{LDO})|^2$ first.\n\n*Conventions:* the factor $\\tfrac12$ converts the one‑sided phase PSD to the standard dBc/Hz definition; if your $S_{th}$ is given double‑sided, drop that factor accordingly. The expression is valid in the offset region where the FM picture holds ($\\omega_m\\ll\\omega_0$), which covers the far‑in $1/f^2$ region of the VCO's phase‑noise plot.",
        "format": "markdown",
        "sha256": "3d4438a425a106d2dcb8d30425f459c030da7465e2cb4375eb1dffca89374b69"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly treats LDO noise as supply pushing, uses the supply-to-frequency sensitivity and FM-to-phase integration to obtain the 1/ωm² dependence, and identifies direct varactor modulation as the coupling mechanism. The convention and factor details are secondary.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2841,
        "output_tokens": 22260,
        "total_tokens": 25101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2841,
        "output_tokens": 22260,
        "total_tokens": 25101,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 20680,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## 1. Model the LDO noise\n\nTreat the LDO as an ideal source $V_{out}$ in series with a noise voltage source $v_{th}(t)$ whose (single‑sided) PSD is $S_{th}(f)$ [V²/Hz]. This is the only noise we want to track; the VCO's own device noise is added later.\n\n## 2. General relation (Leensah's method)\n\nFor *any* noise source that can be referred to a voltage $v_n$ with PSD $S_n$, the single‑sided carrier‑to‑phase‑noise ratio at offset $f$ is\n\n$$L(f)=\\tfrac{1}{2}\\,|H_{PS}(f)|^{2}\\,S_{th}(f)$$\n\nwhere $H_{PS}(f)=\\dfrac{\\text{output phase perturbation (rad)}}{v_{th}\\text{ (V)}}$ is the **supply‑to‑phase transfer function** of the VCO, evaluated at the offset $f$. (The factor ½ converts the two‑sided phase PSD $|H_{PS}|^2S_{th}$ into the single‑sided $L(f)$; if your $S_{th}$ is two‑sided, drop it.) In dB:\n\n$$L(f)[\\text{dBc/Hz}] = 10\\log_{10}S_{th}(f) + 20\\log_{10}|H_{PS}(f)| - 3.01\\ \\text{dB}.$$\n\nSo the whole problem reduces to finding $H_{PS}(f)$.\n\n## 3. Split $H_{PS}$ into two easy pieces\n\n$H_{PS}(f) = H_{\\phi X}(f)\\cdot H_{V}(f)$\n\n* **$H_V(f)=V_X/V_{th}$ – the PSRR (supply → tank node).**\n  In this schematic the inductors $L_1$ tie the tank nodes $X,Y$ straight to the LDO rail. At the *noise* frequency $f$ (not $f_0$) $L_1$ is a small impedance $j2\\pi f L_1$, while looking into node $X$ away from the supply you see the tank branch $Z_X(f)=C_t\\parallel R_p\\parallel r_{cross}$ (switched‑cap banks $B_1,B_2$ + varactors $M_{v1},M_{v2}$ + the negative resistance of $M_1,M_2$). Hence\n\n  $$H_V(f)=\\frac{Z_X(f)}{Z_X(f)+j2\\pi f\\,L_1}\\quad(\\text{single‑ended}).$$\n\n  Because $Z_X\\to 0$ (cap short) and $j2\\pi fL_1\\to 0$ as $f\\to0$, $H_V(f)\\approx 1$ at low offset: the supply noise is mirrored almost undistorted onto the tank node. It rolls off / shows a resonant bump only when $2\\pi f L_1$ becomes comparable to $Z_X$.\n\n* **$H_{\\phi X}(f)$ – tank‑node voltage → phase.**\n  A voltage added to the tank produces a phase equal to the *quadrature* projection of that voltage divided by the carrier amplitude. Writing $v_X=A\\cos(\\omega_0 t+\\phi)+v_n\\cos(2\\pi f t)$ and demodulating gives $\\delta\\phi=(v_n/A)\\sin(2\\pi f t)$, i.e.\n\n  $$H_{\\phi X}(f)\\approx \\frac{1}{A},$$\n\n  a flat (white) transfer, where $A$ is the **peak single‑ended** oscillation amplitude at $X$ (for a differential output of peak $A_d=2A$, use $1/(A_d/2)=2/A_d$).\n\nTherefore\n\n$$H_{PS}(f)\\approx \\frac{1}{A}\\cdot\\frac{Z_X(f)}{Z_X(f)+j2\\pi f\\,L_1}.$$\n\n## 4. Result for this topology\n\nAt low offset ($f\\ll f_0$, $H_V\\approx1$):\n\n$$\\boxed{\\,L_{PS}(f)\\approx \\frac{S_{th}(f)}{2A^{2}}\\,}\\qquad\\big(\\approx 2S_{th}/A_d^2\\ \\text{in differential peak terms}\\big)$$\n\ni.e. a **white (flat) phase‑noise floor**, *not* $1/f^2$. The physical reason is specific to this circuit: the series $L_1$ is a low impedance at the noise frequency, so the LDO noise arrives at the tank as a **voltage** perturbation; a tank‑voltage perturbation modulates the carrier in phase/quadrature with no $1/f$ enhancement, whereas the $1/f^2$ close‑in slope comes from *current* noise (the devices) being converted through the tank capacitor's $1/j2\\pi f C$. At larger offsets multiply the floor by $|H_V(f)|^2$ to capture the inductor/tank filtering.\n\nThere is a second, usually smaller, path: $v_{th}$ also modulates the bias/overdrive of $M_1,M_2$ (hence the negative resistance $-g_m$ and the steady‑state amplitude $A$) and the varactor operating point. This is a *parameter* modulation; Leensah's method adds it to $H_{PS}$ (coherently if the phase is known, otherwise incoherently). It typically has a different $f$‑dependence and can be evaluated the same way (linearize, inject $v_{th}$, read the phase).\n\n## 5. How to actually compute $H_{PS}(f)$ in practice\n\n1. **Circuit‑simulator route (fast):** linearize/AC‑analyze the VCO and plot $|V_X(f)/V_{th}(f)|=|H_V(f)|$ over the offset range; multiply by $1/A$; plug into $L(f)=\\tfrac12|H_{PS}|^2S_{th}(f)$.\n2. **Leensah / state‑equation route (exact):** write the linearized state equations of the cross‑coupled LC tank (states = tank voltage & its derivative, with $g_m(C_t,L_1,R_p)$ as parameters), inject $v_{th}$ at the supply and the $g_m$‑modulation, and read the phase response; this gives $H_{PS}(f)$ including the bias path and the correct $f$‑shape.\n\nFinally, the **total** VCO phase noise is the coherent/incoherent sum of the device‑noise contribution (the usual $1/f^2$ + $1/f^3$ bathtub) and the supply‑induced term $L_{PS}(f)$ above; the LDO's thermal noise therefore sets a white floor $\\simeq S_{th}/(2A^2)$ beneath the close‑in device noise.",
        "format": "markdown",
        "sha256": "ee01eb6ddecc2ec8e99d7a3fd73590c1a972fd516ca6ebb0d2ad906defe7550a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It gives a generic noise-transfer framework, but misses the dominant supply-pushing path through the varactors and incorrectly concludes a white phase-noise floor instead of FM-to-PM conversion with a 1/Δf² dependence. Its brief mention of varactor modulation does not correct the mistaken mechanism.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2841,
        "output_tokens": 23859,
        "total_tokens": 26700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2841,
        "output_tokens": 23859,
        "total_tokens": 26700,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22284,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Master relation\n\nTreat the LDO as a Thevenin noise source: a voltage $v_n$ at the rail $V_{out}$ with two‑sided PSD $S_{th}$ (in V²/Hz), in series with the LDO output resistance $R_{out}$. The VCO output phase‑noise due to it is obtained from the **supply‑to‑phase transfer function** $H_\\phi(\\omega)$ (rad/V):\n\n$$L(\\omega_m)=\\Big(|H_\\phi(\\omega_0+\\omega_m)|^2+|H_\\phi(\\omega_0-\\omega_m)|^2\\Big)\\,S_{th}$$\n\nThe sum over $\\omega_0\\pm\\omega_m$ is the usual noise‑folding of the two sidebands into one offset. In practice you get $H_\\phi$ either by a small‑signal AC analysis / simulation of the VCO (drive $V_{out}$, read the output phase), or by decomposing it as below.\n\n## Decomposition of $H_\\phi$\n\n**1. Rail → tank (the inductor divider).** The rail connects to the tank nodes $X,Y$ through $L_1$. With $Z_L(\\omega)=R_{out}+j\\omega L_s$ ($L_s$ = series inductance from the rail to the *differential* tank; for the centre‑tapped inductor $L_s\\simeq 2L_1+2M$) and $Z_t(\\omega)$ = differential small‑signal input impedance of the tank (resonator + cross‑coupled pair) at frequency $\\omega$, the noise current the rail pushes into the tank is\n\n$$i_n(\\omega_m)=\\frac{v_n(\\omega_0\\pm\\omega_m)}{Z_L(\\omega_0\\pm\\omega_m)+Z_t(\\omega_0\\pm\\omega_m)}$$\n\nwith $Z_t(\\omega)=\\big[(g_p-g_a)+j\\omega C_t+1/(j\\omega L_p+r_p)\\big]^{-1}$ ($g_p$ loss conductance, $g_a$ the negative conductance of $M_1,M_2$, $C_t$ the tank capacitance referred to the differential voltage). At resonance $|Z_t|$ is large ($Q_L R_p$); off resonance it falls as $\\approx 1/(j\\,2\\omega_0 C_t\\,\\omega_m)$.\n\n**2. Tank noise → phase.** A current $i_n$ in parallel with the tank charges $C_t$ ($v=i/j\\omega C_t$), and a tank voltage maps to phase as $v/(2A)$ ($A$ = peak of $V_X-V_Y$). Hence the one‑sided phase‑noise PSD per unit tank current is $1/(2A^2C_t^2\\omega_m^2)$.\n\nCombining both stages gives the explicit closed form for the **linear (inductive) path**:\n\n$$\\boxed{\\,L_{lin}(\\omega_m)=\\frac{S_{th}}{2A^2C_t^2\\,\\omega_m^2}\\left[\\frac{1}{\\big|Z_L(\\omega_0+\\omega_m)+Z_t(\\omega_0+\\omega_m)\\big|^2}+\\frac{1}{\\big|Z_L(\\omega_0-\\omega_m)+Z_t(\\omega_0-\\omega_m)\\big|^2}\\right]\\,}$$\n\nFor white $S_{th}$ this yields a $1/\\omega_m^2$ (i.e. $1/f^2$) term, the expected shape for thermal supply noise.\n\n**3. Non‑linear / v²f path (often the dominant close‑in term).** A *perfectly* symmetric centre‑tapped inductor gives **zero** first‑order *differential* transfer from a *common‑mode* rail noise, so the rail also couples through the bias‑dependent elements: a rail fluctuation shifts the frequency of the varactors ($C(V)$) and the cross‑coupled $g_m$, i.e. $\\delta\\omega=(d\\omega_0/dV_{out})\\,\\delta V_{out}$. Integrating this frequency modulation to phase adds\n\n$$L_{v^2f}(\\omega_m)=S_{th}\\left(\\frac{d\\omega_0/dV_{out}}{\\omega_m}\\right)^2$$\n\nTotal phase noise = $L_{lin}+L_{v^2f}$ (RSS if independent). The finite‑Q / parasitic capacitances and layout asymmetry of $L_1$ provide the linear CM→DM leak that $Z_t$ in the box already captures when you extract it from a real (non‑ideal) model.\n\n## Recipe\n\n1. Set $S_{th}$ = noise PSD at $V_{out}$ (fold in $R_{out}$ if it is not negligible vs. $Z_L$).\n2. Compute $Z_t$ (or directly $H_\\phi$) at $\\omega_0\\pm\\omega_m$ from a small‑signal model or AC simulation of the tank.\n3. Evaluate the boxed expression; add the v²f term using $d\\omega_0/dV_{out}$ (obtain it by sweeping the rail and measuring $\\omega_0$).\n4. Integrate $L(\\omega_m)$ over the offset band of interest to get integrated phase noise.\n\n*Conventions:* the factors $2$ and $4$ in the denominators depend on one‑ vs two‑sided PSD and on whether $A$ is peak or RMS; $C_t$ must be referred to the differential voltage (e.g. two parallel varactors $C_v$ give $C_t=C_v/2$). The structure of the formula — rail noise filtered by the $L$–tank divider, sidebands folded, then converted by $1/(2A\\,\\omega_m C_t)$ plus the v²f term — is the part that is convention‑independent.",
        "format": "markdown",
        "sha256": "3cd8d294249af7e7b061978f3e49e9eff4a1dd378b6e7e5ce6386a996c03e01a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It captures the essential supply-pushing mechanism via dω0/dVout and the 1/ωm² FM-to-phase-noise conversion, including direct varactor sensitivity. It omits the explicit KVCO-reduction design insight and adds a questionable tank-sideband/divider term, so the full model is less reliable than the golden answer.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2841,
        "output_tokens": 28558,
        "total_tokens": 31399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2841,
        "output_tokens": 28558,
        "total_tokens": 31399,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 27250,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\n**The phase noise goes down (the oscillator becomes cleaner), most noticeably in the close‑in region.** Adding $C_T$ from the tail node $P$ to ground does not change the oscillation frequency and has little effect on start‑up; its job is to kill the *common‑mode* voltage that appears at the tail.\n\n## Why the tail node is a problem without $C_T$\n\nIn a perfectly symmetric differential pair the fundamental component of $i_{D1}+i_{D2}$ cancels, so node $P$ does **not** swing at $\\omega_0$. But the square‑law (or more generally non‑linear) $i_V$–$v_{GS}$ characteristic makes the *sum* of the two drain currents contain even harmonics. Expanding about the bias point,\n\n$$i_{D1}+i_{D2} = I_{SS} + a_2\\,V_X^2 + a_2\\,v_p^2 + \\dots$$\n\nso a **second‑harmonic current at $2\\omega_0$** is forced through the impedance seen at $P$. With no $C_T$, $Z_P(2\\omega_0)$ is set by the cross‑coupled pair's source impedance in parallel with $R_{SS}$ and can be sizeable, giving a 2nd‑harmonic ripple $v_p = V_p\\cos 2\\omega_0 t$ at the tail.\n\nThis ripple is harmful because the two transistors have *time‑varying, unequal* transconductances $g_{m1}(t)\\neq g_{m2}(t)$. A common‑mode perturbation $v_p$ therefore produces a **differential** current\n\n$$\\Delta i_D \\approx -\\big(g_{m1}(t)-g_{m2}(t)\\big)\\,v_p,$$\n\ni.e. the 2nd‑harmonic tail ripple is rectified into a modulation of the *fundamental*. That is an AM‑to‑PM conversion, and (because the amplitude of the ripple is itself set by the bias point) it acts as the \"pump\" that up‑converts the $1/f$ noise of $I_{SS}$ into close‑in phase noise. In short, the tail ripple is one of the dominant close‑in phase‑noise sources.\n\n## What $C_T$ does\n\n$C_T$ is a parallel element at node $P$, so\n\n$$Z_P(2\\omega_0) \\approx \\frac{1}{j\\,2\\omega_0 C_T}\\;\\Big\\|\\;R_{SS}\\;\\Big\\|\\;Z_{\\text{degen}}.$$\n\nChoosing $C_T$ so that $1/(2\\omega_0 C_T)$ is small shunts the 2nd‑harmonic (and higher‑frequency) common‑mode component to ground, **drastically reducing $v_p$ at $2\\omega_0$**. Consequences:\n\n* The AM‑to‑PM conversion term above collapses → less phase modulation.\n* The up‑conversion of the tail current source's $1/f$ noise is suppressed → **close‑in phase noise improves**.\n* At low offset frequencies $C_T$ is essentially open, so the low‑frequency impedance at $P$ (set by $1/2g_m$ and $R_{SS}$) is unchanged; the device's bias and the negative‑resistance/start‑up condition are not disturbed, and the oscillation frequency (set by $L_1,L_2$ and the tank capacitances at $X,Y$) is unaffected.\n\n## Bottom line\n\n| Quantity | With $C_T$ |\n|---|---|\n| 2nd‑harmonic voltage at tail $P$ | ↓↓ (shunted by $C_T$) |\n| AM→PM conversion at the tail | ↓↓ |\n| Up‑conversion of $I_{SS}$ $1/f$ noise | ↓↓ |\n| **Close‑in phase noise** | **↓ (improved)** |\n| Oscillation frequency / start‑up | ≈ unchanged |\n\nSo the practical effect of adding the tail capacitor is **lower phase noise, especially close to the carrier**, with the capacitor sized so that $2\\omega_0 C_T$ is large enough to short $2\\omega_0$ (typically $C_T$ on the order of $1/(\\omega_0^2 \\cdot Z_{P,\\text{desired}})$, or roughly a few picofaracts for on‑chip oscillators) but small enough not to load the DC bias.",
        "format": "markdown",
        "sha256": "ae8467c06928b7c475ebd9106e407db455d1de0cee69cf21fd8bfce5faa942a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that adding CT monotonically improves phase noise by filtering tail ripple. The essential result is nonmonotonic: class-C operation can improve phase noise, while flicker-noise upconversion and excessive-CT instability can worsen it.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2916,
        "output_tokens": 8063,
        "total_tokens": 10979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2916,
        "output_tokens": 8063,
        "total_tokens": 10979,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## Short answer\nThe phase noise **goes down (improves)**. Adding $C_T$ turns the tail node $P$ into a low‑impedance node (a \"virtual AC ground\") at $f_0$ and over the noise bandwidth, so the noise that previously appeared at $P$ is shunted to ground instead of modulating the oscillation. The resonant frequency and the $Q$ of the $L_1$–$L_2$ tank are essentially unaffected, because $C_T$ is not in the resonant loop – the improvement comes purely from noise suppression, not from a $Q$ change.\n\n## Why\nIn a cross‑coupled oscillator the tail node $P$ is a *common‑mode* node, and it carries several noise sources that the tank itself does not see:\n\n1. **Noise of the bias current source $I_{SS}$.** Its noise current $i_{n,SS}$ is injected at $P$. With only the finite output resistance $R_{SS}$ at $P$, this current develops a noise voltage $v_P = i_{n,SS}\\,Z_P$ that modulates the bias point and the $g_m$ of $M_1,M_2$, perturbing the phase.\n2. **Common‑mode part of the noise of $M_1,M_2$.** Each transistor's noise current splits into a differential part (which appears at $X$ and $Y$) and a common‑mode part $(i_{n1}+i_{n2})/2$ that flows into $P$ and modulates the bias in the same way.\n3. **Harmonic/common‑mode content at $P$** produced by the alternating conduction of the pair, which otherwise rides on $Z_P$ and converts AM into PM.\n\nWithout $C_T$, $Z_P \\approx R_{SS}\\,\\|\\,Z_{\\text{sources}}$ is large at $f_0$ and at the offset frequencies, so items 1–3 produce a sizeable noise voltage at the tail and a correspondingly large phase‑noise contribution (often comparable to the pair's own noise).\n\nWith $C_T$, $Z_P \\approx 1/(j\\omega C_T)$ over the relevant band, so $v_P$ is strongly suppressed: the tail‑source noise and the common‑mode pair noise are shorted to ground, the bias‑point modulation (and the associated AM→PM) is removed, and the degeneration at $f_0$ is also reduced (a small extra benefit, since the negative resistance / amplitude is not penalized).\n\n## What does *not* change\n- The **differential** component of the pair's noise appears directly at $X$ and $Y$ and is *not* reduced by $C_T$; it sets the residual phase‑noise floor.\n- The **tank $Q$** and the **oscillation frequency** are unchanged ($C_T$ is not in the $L_1$–$L_2$–$C_X$–$C_Y$ resonant path).\n\nHence the net effect is a reduction of the total phase noise – typically on the order of a few dB (up to ~3–6 dB depending on the relative weight of the tail‑source and common‑mode noise), with no $Q$ penalty.",
        "format": "markdown",
        "sha256": "d3fc8fda9565d5dcb20d7e1f075c110191b6ad6eec6bdfdd5d98b0c9a5dbb4ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT monotonically improves phase noise by shunting tail-node noise, missing the nonmonotonic effect and the class-C improvement/degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2916,
        "output_tokens": 12868,
        "total_tokens": 15784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12148,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2916,
        "output_tokens": 12868,
        "total_tokens": 15784,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12148,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "**Short answer:** Adding $C_{\\text T}$ at the tail node $P$ *lowers the close‑in (low‑offset) phase noise*; the white‑noise floor and the oscillation frequency are essentially unchanged.\n\n**Why**\n\n1. **Node $P$ is where the bias noise is injected.** $P$ is the common source of the cross‑coupled pair $M_1,M_2$ and the output of the current source $I_{\\text{SS}}$. The flicker (1/f) noise of $I_{\\text{SS}}$ appears as a low‑frequency current at $P$.\n\n2. **Without $C_{\\text T}$, $Z_P$ is high at low frequency.** At offset frequencies the current source looks like a large resistance $R_{\\text{SS}}$, so the flicker current develops a sizable low‑frequency voltage $v_P = i_{\\text{flicker}}\\cdot R_{\\text{SS}}$. Because the bias point of $M_1,M_2$ swings at $\\omega_0$, this slow fluctuation at $P$ is *up‑converted* by the oscillation into excess phase noise close to the carrier.\n\n3. **With $C_{\\text T}$, $Z_P$ is shorted at low frequency.** A sufficiently large $C_{\\text T}$ makes $1/(\\omega C_{\\text T}) \\ll R_{\\text{SS}}$ over the offset band of interest, so the flicker current of $I_{\\text{SS}}$ is bypassed to ground and $v_P$ stays small. The up‑conversion of the tail's flicker noise is therefore suppressed → the close‑in phase noise improves and the \"knee\" of the spectrum moves to lower offset.\n\n4. **The RF (white‑noise) region is not harmed.** In the *differential* mode of oscillation the tail $P$ is already a virtual ground, so $C_{\\text T}$ carries no differential current and does **not** load the tank $L_1,L_2$ (with the capacitances at $X,Y$). Consequently the tank $Q$, the oscillation frequency, the effective $g_m$, and the thermal‑noise‑limited white phase‑noise floor (set by $Q$ and the tank current) all remain the same. The flicker of $M_1,M_2$ themselves is also unaffected by $C_{\\text T}$.\n\n**Net effect:** the low‑offset phase noise is reduced (better close‑in performance), while the white‑noise floor and $f_0$ are unchanged. In other words, $C_{\\text T}$ acts as a low‑frequency bypass for the tail's flicker noise, preventing its up‑conversion, without disturbing the high‑frequency resonant operation.",
        "format": "markdown",
        "sha256": "c3f4d828f3d51fab1722c9f20f05b602a631440a696135f9b1147ca40733ed7d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It claims a monotonic close-in phase-noise improvement from filtering tail-node flicker noise and misses the central nonmonotonic effect: class-C-like improvement over a range, with degradation mechanisms at small or large CT.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2916,
        "output_tokens": 6937,
        "total_tokens": 9853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6323,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2496,
        "input_tokens": 2916,
        "output_tokens": 6937,
        "total_tokens": 9853,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6323,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nEach of the two stacked blocks is a **cross‑coupled differential pair** (the inner pair, biased by $I_1$, is a regenerative latch; the outer pair, biased by $I_{SS}$, is the input/switching pair of the block). The two blocks are cross‑connected so that the signal loops $X_1/Y_1 \\rightarrow$ block 2 $\\rightarrow X_2/Y_2 \\rightarrow$ block 1, giving a closed positive‑feedback (differential) ring.\n\nThe key element for *frequency* is the **on‑chip inductor from each drain node to $V_{DD}$** (i.e. to AC ground). Together with the small‑signal capacitance that exists at that node, each drain node ($X_1, Y_1$ and $X_2, Y_2$) forms a **parallel LC tank**. The cross‑coupled pairs (and the second block, which only adds loop gain / relaxes the $g_m$ requirement) supply the **negative resistance** that cancels the tank loss and starts the oscillation. The nodes oscillate 180° out of phase (differential mode).\n\nSo the bias currents $I_{SS}$ and $I_1$ set the **bias point, the negative‑resistance value (start‑up condition) and the amplitude**, but they do **not** set the frequency. The frequency is set by the tank.\n\n## Estimated oscillation frequency\n\nTo first order the circuit rings at the resonant frequency of each drain‑node tank:\n\n$$\\boxed{\\,f_{osc} \\;\\approx\\; \\frac{1}{2\\pi\\sqrt{L\\,C_{node}}}\\,}$$\n\nwhere\n\n* $L$ = the inductor connected from the node to $V_{DD}$, and\n* $C_{node}$ = total small‑signal capacitance from that drain node to AC ground = the drain‑to‑bulk capacitances of the devices tied to the node plus layout/stray parasitics (the gate‑drain capacitances add a Miller‑type contribution; in the differential mode part of it cancels). On silicon this is typically on the order of a few ×10 fF to a few ×100 fF.\n\n**Start‑up (context, not frequency):** the differential negative resistance presented by the cross‑coupled pairs, $R_{neg}\\approx -2/g_{m,cross}$ (with $g_{m,cross}$ set by $I_1$, aided by the second block set by $I_{SS}$), must satisfy $|R_{neg}| < R_{tank}$ so the amplitude builds. This determines *whether* it oscillates and the peak‑to‑peak voltage, not $f_{osc}$.\n\n## Numerical ballpark (no values were given in the figure)\n\nBecause $L$ and $C_{node}$ are not specified, a number requires assuming typical on‑chip values:\n\n| $L$ | $C_{node}$ | $f_{osc}\\approx\\frac{1}{2\\pi\\sqrt{LC}}$ |\n|-----|-----------|------------------------------------------|\n| 1 nH | 50 fF | ≈ 22 GHz |\n| 2 nH | 100 fF | ≈ 11 GHz |\n| 5 nH | 200 fF | ≈ 5 GHz |\n| 10 nH | 300 fF | ≈ 2.9 GHz |\n\nHence, with realistic on‑chip inductors the oscillator operates in the **GHz range**, and the governing estimate is $f_{osc}\\simeq 1/(2\\pi\\sqrt{L\\,C_{node}})$, independent of $I_{SS}$ and $I_1$ (which control start‑up and amplitude).\n\n**In short:** it is an LC (tank) oscillator; the oscillation frequency is the resonance of each inductive load with the node capacitance, $f_{osc}\\approx 1/(2\\pi\\sqrt{L\\,C_{node}})$, while the bias currents only ensure the negative‑resistance start‑up condition.",
        "format": "markdown",
        "sha256": "4a15612d937953f562d1549b76cdde9cfece6056640b5365e8af866800b30cfa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly gives the tank resonance as a baseline, but omits the coupling-induced frequency shift, which depends on the coupling strength (for example, I1/ISS or gmc/gm1). The claim that the bias currents do not affect frequency is therefore incorrect.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1552,
        "output_tokens": 8577,
        "total_tokens": 10129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1552,
        "output_tokens": 8577,
        "total_tokens": 10129,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7665,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nEach half of the drawing is a **cross‑coupled inverter pair (a 2‑inverter positive‑feedback loop) whose two outputs are loaded by an inductor to the supply**. The supply rail is an AC ground, so every output node sees an inductor *L* in parallel with the total capacitance that node drives. The cross‑coupled inverters, linearised about the bias point, present a **negative resistance** at the output; this negative resistance cancels the tank losses and sustains oscillation. The two halves are identically built and are cross‑coupled to one another only to set the *relative phase* of the two tanks (in‑phase / 180° / quadrature, depending on the wiring); to first order they do **not** set the frequency. Hence the oscillation frequency is simply the **parallel‑resonant frequency of the inductive load at each output node**.\n\n## Resonant frequency\n\nAt node *X* (or *Y*) the small‑signal tank is the inductor *L* to AC‑ground in parallel with the node capacitance *C*ₙ. Resonance (the point where the tank impedance is real and the loop phase condition is met) gives\n\n$$\\omega_0 \\simeq \\frac{1}{\\sqrt{L\\,C_n}}, \\qquad\n\\boxed{\\;f_{osc} \\simeq \\frac{1}{2\\pi\\sqrt{L\\,C_n}}\\;}$$\n\nwhere *C*ₙ is **all** the capacitance tied to that node:\n\n$$C_n \\;=\\; \\sum C_{in} \\;+\\; C_{out}^{(p)}$$\n\n* $\\sum C_{in}$ – the gate (input) capacitances of every inverter whose gate is connected to the node (the local cross‑coupled inverter **plus** the inverter it drives in the other stage, because of the inter‑stage wiring);\n* $C_{out}^{(p)}$ – the output/parasitic (drain‑to‑substrate, wiring) capacitance of the inverter that switches that node.\n\nEquivalently, viewed in the **differential** sense of one stage, the two inductors to ground look like a series inductance $2L$ and the two node capacitors look like a differential capacitance $C_n/2$; the product is still $L\\,C_n$, so the same expression $f_0 = 1/(2\\pi\\sqrt{L C_n})$ holds. The coupling between the two stages splits the common‑mode/differential modes only by a small amount (∝ coupling capacitance / *C*ₙ) and can be ignored in an estimate.\n\n## How to use it (and the \"estimate\" caveat)\n\nThe figure carries no component values, so the most specific estimate possible is the symbolic one above. To get a number, read off (or assume) *L* and the per‑node capacitance. For a typical CMOS cross‑coupled‑inverter VCO, each node drives on the order of 2–4 inverter gates, so $C_n \\approx (2\\text{–}4)\\,C_g + C_{p}$, and with *L* in the nH range and *C*ₙ in the fF–pF range the result lands in the **hundreds of MHz to a few GHz**, e.g.\n\n$$f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{(1\\ \\text{nH})(50\\ \\text{fF})}} \\approx 2.2\\ \\text{GHz}.$$\n\n**Bottom line:** the circuit oscillates at the LC‑tank resonance of its inductive load,\n\n$$f_{osc} \\approx \\dfrac{1}{2\\pi\\sqrt{L\\,C_n}},$$\n\nwith *C*ₙ the total capacitance at each output node; the cross‑coupled inverters only supply the negative resistance that keeps the oscillation alive.",
        "format": "markdown",
        "sha256": "d4d9069b7038a1e77c1b39ed81720a512b2bb3ba803cc0d1a814ef1176f17239"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the LC tank resonance as the baseline, but incorrectly treats it as the full oscillation frequency. The answer misses the essential coupling-induced shift, approximately Δω = αω₀/(2Q), and instead claims coupling does not set the frequency.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1552,
        "output_tokens": 6643,
        "total_tokens": 8195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1552,
        "output_tokens": 6643,
        "total_tokens": 8195,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5757,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "Qwen/Qwen3.8-27B",
        "route": "selfhosted_vllm_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nEach stage (top: $X_1,Y_1$; bottom: $X_2,Y_2$) is a **cross‑coupled differential pair loaded with inductors** – i.e. a basic differential LC oscillator. The two identical stages are cross‑coupled through the long gates so that they lock 90° apart (a *quadrature* oscillator), but to first order the **frequency is set locally by the LC tank at each node**, and the two stages therefore oscillate at the *same* frequency.\n\n## The resonator\n\nThe thick rail at the top is $V_{DD}$, i.e. **AC ground**. Hence each node $X_i$ and $Y_i$ sees:\n\n* an inductor $L$ to AC ground, and\n* the parasitic capacitances of the transistors tied to that node, to AC ground (the sources sit on ideal current sources → AC ground).\n\nThe cross‑coupled $g_m$'s supply the negative conductance that cancels the tank loss; they do **not** set the frequency. Oscillation occurs at the parallel resonance of $L$ with the node capacitance $C_L$, because at that point the tank looks purely resistive and the reactive currents cancel:\n\n$$\\omega_0 L = \\frac{1}{\\omega_0 C_L}\\quad\\Rightarrow\\quad \\boxed{\\,f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{L\\,C_L}}\\,}$$\n\n## What is in $C_L$\n\n$C_L$ is the total capacitance from one node to AC ground. In the differential mode (the two nodes swing $\\pm v$), a capacitor bridging the two differential nodes contributes $2C$, so per node\n\n$$C_L \\approx C_{gs} + 2C_{gd} + C_{db}$$\n\nsummed over the devices whose drain *or* gate is at that node (the inner cross‑coupled pair dominates; add the outer pair's $C_{gs}+C_{db}$ for a slightly better estimate). Capacitors that couple to the *other* stage ($C_{gd}$ of the outer devices) only perturb the frequency and the quadrature balance, so they are second‑order for an estimate.\n\n## Numerical illustration (no values are given in the figure)\n\nBecause $L$ and the device sizes are not specified, a single number cannot be read off the drawing. For a typical on‑chip value, e.g. $L = 1\\ \\text{nH}$ and $C_L \\approx 1\\ \\text{pF}$:\n\n$$f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{10^{-9}\\cdot 10^{-12}}} \\approx 5\\ \\text{GHz}$$\n\n(equivalently $L=1\\ \\text{nH},\\ C_L=100\\ \\text{fF}\\Rightarrow f_{osc}\\approx 16\\ \\text{GHz}$).\n\n**Bottom line:** estimate the frequency as the parallel‑resonance frequency of each inductor $L$ with the total node capacitance $C_L$; both stages share this frequency, differing only by a 90° phase. Plug your actual $L$ and $C_L$ into $f_{osc}=1/(2\\pi\\sqrt{L C_L})$ for the number.",
        "format": "markdown",
        "sha256": "417f8acfb10500a82c3edd0a617a9a82ae552ff618128e6cd18f2753b1535611"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It gives the correct uncoupled tank-resonance estimate, but omits the essential coupling-induced frequency shift and incorrectly says coupling does not set the frequency. The estimate should include a shift of approximately αω0/(2Q), or an equivalent expression.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1552,
        "output_tokens": 7688,
        "total_tokens": 9240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 832,
        "input_tokens": 1552,
        "output_tokens": 7688,
        "total_tokens": 9240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6942,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    }
  ]
}
