{
  "model_key": "qwen_38_max",
  "display_name": "Qwen 3.8 Max",
  "provider": "alibaba",
  "evaluation_model_ids": [],
  "thinking_effort": "xhigh",
  "configuration_note": "Qwen 3.8 Max answered the 50 tasks in three rollouts through OpenRouter's chat completions route (qwen/qwen3.8-max-0902) at reasoning effort xhigh, the highest it offers. Requests set temperature to 0 and max_tokens to 131,072, the model's output limit. Each request was one user message holding only the question text and its figure: no title, headings or system prompt. Answers cut off at the output limit were re-run; every attempt is counted in tokens and cost. Answers were graded by GPT-6 Luna at maximum reasoning effort. Cost uses OpenRouter's list price for Qwen 3.8 Max on 2026-11-10 ($2.00 input, $0.25 cached input, $6.00 output per 1M tokens).",
  "mode": "direct_qa",
  "summary": {
    "rollout_count": 3,
    "answer_count": 150,
    "scores": {
      "overall": {
        "gpt_6_luna_max": {
          "response_count": 150,
          "correct_count": 103,
          "incorrect_count": 47,
          "partial_credit_count": 44,
          "zero_count": 3,
          "mean_score_0_to_4": 3.2533333333333334,
          "score_percent": 81.33333333333333,
          "score_distribution": {
            "0": 3,
            "1": 19,
            "2": 18,
            "3": 7,
            "4": 103
          }
        },
        "active": {
          "response_count": 150,
          "correct_count": 103,
          "incorrect_count": 47,
          "partial_credit_count": 44,
          "zero_count": 3,
          "mean_score_0_to_4": 3.2533333333333334,
          "score_percent": 81.33333333333333,
          "score_distribution": {
            "0": 3,
            "1": 19,
            "2": 18,
            "3": 7,
            "4": 103
          }
        }
      },
      "part1": {
        "gpt_6_luna_max": {
          "response_count": 90,
          "correct_count": 80,
          "incorrect_count": 10,
          "partial_credit_count": 7,
          "zero_count": 3,
          "mean_score_0_to_4": 3.7444444444444445,
          "score_percent": 93.61111111111111,
          "score_distribution": {
            "0": 3,
            "1": 1,
            "2": 2,
            "3": 4,
            "4": 80
          }
        },
        "active": {
          "response_count": 90,
          "correct_count": 80,
          "incorrect_count": 10,
          "partial_credit_count": 7,
          "zero_count": 3,
          "mean_score_0_to_4": 3.7444444444444445,
          "score_percent": 93.61111111111111,
          "score_distribution": {
            "0": 3,
            "1": 1,
            "2": 2,
            "3": 4,
            "4": 80
          }
        }
      },
      "part2": {
        "gpt_6_luna_max": {
          "response_count": 60,
          "correct_count": 23,
          "incorrect_count": 37,
          "partial_credit_count": 37,
          "zero_count": 0,
          "mean_score_0_to_4": 2.5166666666666666,
          "score_percent": 62.916666666666664,
          "score_distribution": {
            "1": 18,
            "2": 16,
            "3": 3,
            "4": 23
          }
        },
        "active": {
          "response_count": 60,
          "correct_count": 23,
          "incorrect_count": 37,
          "partial_credit_count": 37,
          "zero_count": 0,
          "mean_score_0_to_4": 2.5166666666666666,
          "score_percent": 62.916666666666664,
          "score_distribution": {
            "1": 18,
            "2": 16,
            "3": 3,
            "4": 23
          }
        }
      }
    },
    "by_rollout": {
      "1": {
        "response_count": 50,
        "correct_count": 36,
        "incorrect_count": 14,
        "partial_credit_count": 13,
        "zero_count": 1,
        "mean_score_0_to_4": 3.28,
        "score_percent": 82.0,
        "score_distribution": {
          "0": 1,
          "1": 7,
          "2": 5,
          "3": 1,
          "4": 36
        }
      },
      "2": {
        "response_count": 50,
        "correct_count": 34,
        "incorrect_count": 16,
        "partial_credit_count": 15,
        "zero_count": 1,
        "mean_score_0_to_4": 3.26,
        "score_percent": 81.5,
        "score_distribution": {
          "0": 1,
          "1": 6,
          "2": 6,
          "3": 3,
          "4": 34
        }
      },
      "3": {
        "response_count": 50,
        "correct_count": 33,
        "incorrect_count": 17,
        "partial_credit_count": 16,
        "zero_count": 1,
        "mean_score_0_to_4": 3.22,
        "score_percent": 80.5,
        "score_distribution": {
          "0": 1,
          "1": 6,
          "2": 7,
          "3": 3,
          "4": 33
        }
      }
    },
    "tokens": {
      "response_count": 150,
      "usage_record_count": 150,
      "complete_usage_count": 150,
      "missing_usage_count": 0,
      "missing_cached_input_count": 0,
      "complete": true,
      "totals": {
        "cached_input_tokens": 71680,
        "input_tokens": 223791,
        "output_tokens": 1471022,
        "total_tokens": 1694813
      },
      "known_totals": {
        "cached_input_tokens": 71680,
        "input_tokens": 223791,
        "output_tokens": 1471022,
        "total_tokens": 1694813
      }
    },
    "by_rollout_part": {
      "part1": {
        "1": {
          "response_count": 30,
          "correct_count": 28,
          "incorrect_count": 2,
          "partial_credit_count": 1,
          "zero_count": 1,
          "mean_score_0_to_4": 3.8333333333333335,
          "score_percent": 95.83333333333334,
          "score_distribution": {
            "0": 1,
            "3": 1,
            "4": 28
          }
        },
        "2": {
          "response_count": 30,
          "correct_count": 27,
          "incorrect_count": 3,
          "partial_credit_count": 2,
          "zero_count": 1,
          "mean_score_0_to_4": 3.7333333333333334,
          "score_percent": 93.33333333333333,
          "score_distribution": {
            "0": 1,
            "1": 1,
            "3": 1,
            "4": 27
          }
        },
        "3": {
          "response_count": 30,
          "correct_count": 25,
          "incorrect_count": 5,
          "partial_credit_count": 4,
          "zero_count": 1,
          "mean_score_0_to_4": 3.6666666666666665,
          "score_percent": 91.66666666666666,
          "score_distribution": {
            "0": 1,
            "2": 2,
            "3": 2,
            "4": 25
          }
        }
      },
      "part2": {
        "1": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 12,
          "zero_count": 0,
          "mean_score_0_to_4": 2.45,
          "score_percent": 61.25000000000001,
          "score_distribution": {
            "1": 7,
            "2": 5,
            "4": 8
          }
        },
        "2": {
          "response_count": 20,
          "correct_count": 7,
          "incorrect_count": 13,
          "partial_credit_count": 13,
          "zero_count": 0,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "1": 5,
            "2": 6,
            "3": 2,
            "4": 7
          }
        },
        "3": {
          "response_count": 20,
          "correct_count": 8,
          "incorrect_count": 12,
          "partial_credit_count": 12,
          "zero_count": 0,
          "mean_score_0_to_4": 2.55,
          "score_percent": 63.74999999999999,
          "score_distribution": {
            "1": 6,
            "2": 5,
            "3": 1,
            "4": 8
          }
        }
      }
    }
  },
  "answers": [
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Ideally, the intrinsic gain **approximately doubles**.\n\nThe intrinsic gain of a MOSFET in saturation is\n\n\\[\nA_0 = g_m r_o = \\frac{g_m}{g_{ds}}\n\\]\n\nFor a long-channel MOSFET,\n\n\\[\ng_m \\approx \\frac{2I_D}{V_{OV}}\n\\]\n\nand\n\n\\[\nr_o \\approx \\frac{1}{\\lambda I_D}\n\\]\n\nwhere the channel-length modulation parameter is roughly\n\n\\[\n\\lambda \\propto \\frac{1}{L}\n\\]\n\nso\n\n\\[\nr_o \\propto L\n\\]\n\nIf both length and width are doubled:\n\n\\[\nW \\rightarrow 2W,\\qquad L \\rightarrow 2L\n\\]\n\nthen the aspect ratio stays the same:\n\n\\[\n\\frac{W}{L} \\rightarrow \\frac{2W}{2L} = \\frac{W}{L}\n\\]\n\nSo, for the same bias condition/overdrive voltage, \\(g_m\\) is essentially unchanged. But because \\(L\\) is doubled, \\(r_o\\) approximately doubles. Therefore,\n\n\\[\nA_0 = g_m r_o\n\\]\n\nalso approximately doubles.\n\nSo the short answer is:\n\n\\[\n\\boxed{\\text{Intrinsic gain roughly doubles.}}\n\\]\n\nIn real short-channel MOSFETs, the increase may be less than exactly \\(2\\times\\) because \\(g_m\\) and \\(r_o\\) do not scale ideally, but the trend is that the intrinsic gain increases mainly due to the longer channel.",
        "format": "markdown",
        "sha256": "b55f18017377f062c42d2372ac27fca543e4fb62773240354a74596745805844"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly explains that doubling both dimensions preserves W/L and, at fixed overdrive, leaves gm approximately unchanged while the longer channel roughly doubles ro, so intrinsic gain roughly doubles.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 3371,
        "total_tokens": 3452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 3371,
        "total_tokens": 3452,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3022,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOSFET remains in saturation and is biased at the same operating point, its **intrinsic gain approximately doubles**.\n\nThe low-frequency intrinsic gain is\n\n\\[\nA_{v0} = g_m r_o = \\frac{g_m}{g_{ds}}\n\\]\n\nFor a long-channel MOSFET:\n\n\\[\ng_m \\approx \\frac{2I_D}{V_{OV}}\n\\]\n\nand\n\n\\[\nr_o \\approx \\frac{1}{\\lambda I_D}\n\\]\n\nwhere channel-length modulation gives roughly\n\n\\[\n\\lambda \\propto \\frac{1}{L}\n\\]\n\nIf both width and length are doubled:\n\n\\[\nW \\to 2W,\\qquad L \\to 2L\n\\]\n\nthen the aspect ratio stays the same:\n\n\\[\n\\frac{W}{L} = \\frac{2W}{2L}\n\\]\n\nSo, for the same overdrive voltage or same drain current, \\(g_m\\) is approximately unchanged. But doubling \\(L\\) roughly halves \\(\\lambda\\), so \\(r_o\\) approximately doubles.\n\nTherefore:\n\n\\[\nA_{v0}' = g_m (2r_o) \\approx 2A_{v0}\n\\]\n\nSo the intrinsic gain **increases by about a factor of 2**.\n\nIn short-channel devices, the increase may not be exactly 2 because \\(g_m\\), \\(g_{ds}\\), threshold voltage, DIBL, and mobility effects can change with \\(L\\), but the usual first-order answer is: **it doubles**.",
        "format": "markdown",
        "sha256": "436df9c24e372a53c9f08808f0e457461a7b31fce65c42414553d92c88c713a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that intrinsic gain approximately doubles: doubling both dimensions preserves W/L and gm, while doubling L roughly halves channel-length modulation and doubles ro. The stated assumptions and short-channel caveat are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 4665,
        "total_tokens": 4746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 4665,
        "total_tokens": 4746,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4319,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-001-double-length-and-width-mosfet-its-intrinsic",
      "part": "part1",
      "question_number": 1,
      "question": "If we double the length and width of a MOSFET, what happens to its intrinsic gain?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Assuming the MOSFET remains in saturation and is biased at the same current/overdrive, its intrinsic gain approximately **doubles**.\n\nIntrinsic gain is\n\n\\[\nA_0 = g_m r_o = \\frac{g_m}{g_{ds}}\n\\]\n\nFor a long-channel MOSFET:\n\n\\[\ng_m \\approx \\frac{2I_D}{V_{OV}}\n\\]\n\nand\n\n\\[\nr_o \\approx \\frac{1}{\\lambda I_D}\n\\]\n\nwhere \\(\\lambda\\) is roughly inversely proportional to channel length:\n\n\\[\n\\lambda \\propto \\frac{1}{L}\n\\]\n\nIf both \\(W\\) and \\(L\\) are doubled, the ratio \\(W/L\\) stays the same, so for the same bias condition \\(g_m\\) is essentially unchanged. But doubling \\(L\\) roughly halves \\(\\lambda\\), so \\(r_o\\) doubles.\n\nTherefore:\n\n\\[\nA_0 \\rightarrow 2A_0\n\\]\n\nSo the intrinsic gain increases by a factor of **2**, or about **+6 dB**.\n\nThis assumes long-channel behavior and unchanged bias point. In short-channel devices or if the bias current/overdrive voltage changes, the exact result may differ.",
        "format": "markdown",
        "sha256": "f4856c09c571a78102cbc1d50c7f064c31ccf5d2968958973f1b1b7bca8c6de4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that with unchanged overdrive and W/L, gm and drain current remain approximately unchanged, while doubling L roughly halves lambda and doubles ro, so intrinsic gain doubles. The stated assumptions and caveats are appropriate.",
          "golden_solution_sha256": "b623efa74b67c0787641e221f1d6de9d7318205927fbcd9490d3ed132b5450df",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 3255,
        "total_tokens": 3336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 3255,
        "total_tokens": 3336,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2983,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what is being held constant.\n\nFor a long-channel MOSFET in saturation:\n\n\\[\nI_D=\\frac{1}{2}k'(W/L)V_{OV}^2\n\\]\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}=k'(W/L)V_{OV}\n\\]\n\nSo if you increase the overdrive voltage \\(V_{OV}=V_{GS}-V_{TH}\\) by raising \\(V_{GS}\\) on the same MOSFET, \\(I_D\\) increases and \\(g_m\\) increases. In that case, **Student A is correct**.\n\nBut also:\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nSo if the drain current \\(I_D\\) is held fixed, increasing \\(V_{OV}\\) makes \\(g_m\\) decrease. In that case, **Student B is correct**.\n\nSo the best answer is: **neither is universally correct; it depends on the bias constraint.** For fixed device and increasing \\(V_{GS}\\), \\(g_m\\) goes up. For fixed drain current, \\(g_m\\) goes down as overdrive voltage increases.",
        "format": "markdown",
        "sha256": "5d41ada1993a619e393c871256aaeb3a9a93dccd9d8ecd03aff7f024e0d9cf89"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that for a fixed device, increasing overdrive raises drain current and gm, so Student A is correct; it also correctly notes Student B’s result applies when drain current is held fixed.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 93,
        "output_tokens": 1354,
        "total_tokens": 1447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 93,
        "output_tokens": 1354,
        "total_tokens": 1447,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1099,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Student **A is correct**—for the usual case of a MOSFET biased in saturation with a fixed device size.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D = \\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{OV}^2\n\\]\n\nwhere\n\n\\[\nV_{OV} = V_{GS} - V_{TH}\n\\]\n\nThe transconductance is\n\n\\[\ng_m = \\frac{\\partial I_D}{\\partial V_{GS}}\n\\]\n\nSo,\n\n\\[\ng_m = \\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nThus, as the overdrive voltage \\(V_{OV}\\) increases, \\(g_m\\) increases.\n\nHowever, there is an important caveat: if the drain current \\(I_D\\) is held constant, then\n\n\\[\ng_m = \\frac{2I_D}{V_{OV}}\n\\]\n\nso increasing \\(V_{OV}\\) would make \\(g_m\\) decrease. That is probably what Student B is thinking.\n\nBut under the normal interpretation—same MOSFET, increasing \\(V_{GS}\\) above threshold in saturation—**Student A is correct**.",
        "format": "markdown",
        "sha256": "43af7ca5228e8049ff2cd10c7ba139ce6883da1440d851c55e9513757a08ae2d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed device size, derives that gm increases linearly with overdrive, and explains Student B’s result applies when drain current is held constant.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 93,
        "output_tokens": 933,
        "total_tokens": 1026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 93,
        "output_tokens": 933,
        "total_tokens": 1026,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 664,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-002-student-says-transconductance-mosfet-goes-up-as",
      "part": "part1",
      "question_number": 2,
      "question": "Student A says the transconductance of a MOSFET goes up as the overdrive voltage increases. Student B says it goes down. Who is correct?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "It depends on what is being held constant.\n\nFor a long-channel MOSFET in saturation,\n\n\\[\nI_D=\\frac{1}{2}\\mu C_{ox}\\frac{W}{L}V_{OV}^2\n\\]\n\nwhere\n\n\\[\nV_{OV}=V_{GS}-V_{TH}\n\\]\n\nThe transconductance is\n\n\\[\ng_m=\\frac{\\partial I_D}{\\partial V_{GS}}\n      =\\mu C_{ox}\\frac{W}{L}V_{OV}\n\\]\n\nor equivalently,\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nSo:\n\n### If the same MOSFET is biased by increasing \\(V_{GS}\\)\n\nThen \\(V_{OV}\\) increases, \\(I_D\\) also increases, and\n\n\\[\ng_m \\propto V_{OV}\n\\]\n\nSo Student A is correct: **transconductance goes up as overdrive voltage increases.**\n\n---\n\n### If the drain current \\(I_D\\) is held fixed\n\nThen using\n\n\\[\ng_m=\\frac{2I_D}{V_{OV}}\n\\]\n\nincreasing \\(V_{OV}\\) makes \\(g_m\\) smaller. This often happens when comparing different device sizes biased at the same current.\n\nSo Student B is correct in that case: **at fixed drain current, larger overdrive voltage gives lower transconductance.**\n\n---\n\n### Bottom line\n\nNeither student is universally right without specifying the bias condition.\n\n- **Same transistor, increasing \\(V_{GS}\\):** \\(g_m\\) increases → Student A.\n- **Fixed drain current:** \\(g_m\\) decreases as \\(V_{OV}\\) increases → Student B.",
        "format": "markdown",
        "sha256": "ae4be3013a5533b631940a121ad8c220d3a2d1cc5817158b5245b8212b1a2c37"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies Student A as right for a fixed transistor size, derives that gm increases with VOV as ID rises, and appropriately explains Student B’s fixed-current case.",
          "golden_solution_sha256": "e805626814432e31b3628b4bf4073fa0c2304a7c8ea8bad4f0422be86c312f74",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 93,
        "output_tokens": 1597,
        "total_tokens": 1690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 93,
        "output_tokens": 1597,
        "total_tokens": 1690,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1222,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Essentially **yes in topology**, but **not literally if you keep the same current/voltage reference directions**.\n\nThe usual small-signal model of a PMOS has the same elements as an NMOS:\n\n- Gate is open at low frequency, with capacitances \\(C_{gs}, C_{gd}, C_{gb}\\) at high frequency.\n- A voltage-controlled current source between drain and source.\n- An output resistance \\(r_o\\).\n- Optionally a body-effect current source \\(g_{mb}\\) term.\n- Parasitic capacitances to source/drain/body.\n\nThe difference is **polarity/reference direction**:\n\n- NMOS: positive \\(v_{gs}\\) increases current flowing conventionally from **drain to source**.\n- PMOS: positive \\(v_{sg}\\), equivalently more negative \\(v_{gs}\\), increases current flowing conventionally from **source to drain**.\n\nSo you can either:\n\n1. Draw the PMOS controlled source in the opposite direction and control it by \\(v_{sg}\\), or  \n2. Keep the same model orientation as NMOS and account for the sign change using \\(v_{gs}\\) or a negative transconductance term.\n\nFor example, using currents in the natural conduction direction:\n\n\\[\n\\text{NMOS: } i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\n\\[\n\\text{PMOS: } i_{sd} = g_m v_{sg} + \\frac{v_{sd}}{r_o}\n\\]\n\nThe actual values of \\(g_m\\), \\(r_o\\), and capacitances generally differ because PMOS and NMOS have different carrier mobilities, threshold voltages, doping, and geometry. But the **small-signal equivalent circuit structure is the same**.",
        "format": "markdown",
        "sha256": "ad522c15cb99b1b9484ba12a1f6b24984bcc1be06e121ff34e2b1f46e50e70e4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same structure as the NMOS model, with polarity and reference-direction conventions reversed. This earns full credit under the golden solution's rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 8364,
        "total_tokens": 8445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 8364,
        "total_tokens": 8445,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7973,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**in topology/form**, but not literally if you keep the same voltage polarities and current directions.\n\nA PMOS biased in the same region as an NMOS, e.g. saturation, uses the same small-signal elements:\n\n- Gate is high impedance.\n- A voltage-controlled current source between source and drain.\n- Output resistance \\(r_o\\).\n- Parasitic capacitances at high frequency.\n- Body-effect source if body and source are not tied together.\n\nThe difference is the **sign convention**:\n\n\\[\n\\text{NMOS: } i_d = g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\nwith conventional small-signal current usually taken from drain to source.\n\nFor PMOS it is often written symmetrically as:\n\n\\[\n\\text{PMOS: } i_{sd} = g_m v_{sg} + \\frac{v_{sd}}{r_o}\n\\]\n\nwith conventional current from source to drain.\n\nSo the PMOS small-signal model is essentially the NMOS model with **reversed voltage polarities/current directions**. The actual parameter values—\\(g_m\\), \\(r_o\\), capacitances, etc.—are generally different because of device geometry, mobility, bias, and body connection.",
        "format": "markdown",
        "sha256": "563118dc4360f3ebfa5603a6a3131667f2b558b1a9844a0ad9d4d419462b8950"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly says the PMOS small-signal model has the same form as the NMOS model, with sign conventions reversed; this earns full credit.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 5267,
        "total_tokens": 5348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4988,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 5267,
        "total_tokens": 5348,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4988,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-003-small-signal-model-pmos-device-identical-nmos",
      "part": "part1",
      "question_number": 3,
      "question": "Is the small-signal model of a PMOS device identical to that of an NMOS device?",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "Yes—**in structure/topology**, the small-signal model of a PMOS is essentially the same as that of an NMOS. The main difference is **polarity and sign conventions**, not the form of the model.\n\nFor example, in the low-frequency saturation model:\n\n- **NMOS**: dependent current source is usually drawn from **drain to source**, controlled by \\(v_{gs}\\).\n- **PMOS**: the same model can be used, but conventional current flows from **source to drain**, so the controlled source is often drawn from **source to drain**, controlled by \\(v_{sg}\\).\n\nEquivalently:\n\n\\[\ni_d \\approx g_m v_{gs} + \\frac{v_{ds}}{r_o}\n\\]\n\ncan be used for both if current/voltage reference directions are chosen consistently. For PMOS, many designers prefer:\n\n\\[\ni_{sd} \\approx g_m v_{sg} + \\frac{v_{sd}}{r_o}\n\\]\n\nto keep currents positive in the natural PMOS direction.\n\nSo the answer is: **the small-signal equivalent circuit is the same, but the DC bias polarities, current directions, and sign conventions are reversed.** Device parameters such as \\(g_m\\), \\(r_o\\), and capacitances may also have different values.",
        "format": "markdown",
        "sha256": "6f07b1a2fb9868fe0015676bb687dbde2255dafad9d19b8344467d79fc5c5972"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that the PMOS small-signal model has the same form as the NMOS model, with polarity and sign conventions reversed, matching the full-credit rule.",
          "golden_solution_sha256": "ad8a01fc96398ca5ab0993a444ff64ba0cfcb88738d2a52872ea47f671e0635e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 2493,
        "total_tokens": 2574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 81,
        "output_tokens": 2493,
        "total_tokens": 2574,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nIn this circuit the gate of M₁ is tied to its drain (both connect to the top node), so M₁ is a **diode‑connected** transistor with its source grounded. The test source forces:\n\n$$V_{GS} = V_{DS} = V_X$$\n\nand I_X is the current pulled into the drain.\n\n**Region check:**\n\n- **V_X < V_TH:** M₁ is cut off → I_X = 0\n- **V_X ≥ V_TH:** Since V_DS = V_GS, the condition V_DS ≥ V_GS − V_TH is *always* satisfied, so the device turns on **directly into saturation** (there is no triode region here).\n\n$$I_X = \\tfrac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2(1+\\lambda V_X)$$\n\n## The Sketch\n\n```\n   I_X\n    ^\n    |                                  /\n    |                                /\n    |                              /\n    |                            /\n    |                          /\n    |                        /\n    |                      /\n    |                    /\n    |                  /\n    |                /\n    |              /\n    |            /\n    |          /\n    |        /\n    |      /\n    |____/________________________________> V_X\n    0    V_TH\n```\n\n**Features of the curve:**\n\n- I_X = 0 along the horizontal axis up to V_X = V_TH (flat, zero current).\n- At V_X = V_TH the curve leaves the axis with **zero slope**, then bends upward as a **parabola** (square‑law branch), since the device is in saturation for all V_X > V_TH.\n- If channel‑length modulation (λ) is included, the parabola tilts upward slightly faster at large V_X (the nearly straight rising tail); if λ = 0 it is a pure square law.\n\nSo the I_X–V_X characteristic looks exactly like a \"diode\" curve: off below V_TH, then a quadratic rise above V_TH.",
        "format": "markdown",
        "sha256": "505a828690886aad7ee98d91170f5dea108e14a764371b4c5a6e600ee3fc1b1b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its cutoff below threshold, and its saturation square-law rise above threshold. The channel-length modulation detail is permitted by the golden solution.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 960,
        "output_tokens": 4084,
        "total_tokens": 5044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 960,
        "output_tokens": 4084,
        "total_tokens": 5044,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3625,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up: what is this device doing?\n\nThe gate of M₁ is wired to its drain (both connect to the top node), and the source is grounded. The test source V_X is applied from that node to ground, so:\n\n- V_GS = V_DS = V_X\n- I_X = I_D (no gate current)\n\nThis is the **diode‑connected MOSFET**.\n\n## Region of operation\n\n- **V_X ≤ V_TH:** M₁ is off → I_X = 0.\n- **V_X > V_TH:** Since V_DS = V_GS, we always have V_DS > V_GS − V_TH, so the device can **never enter the triode region** — it turns on directly into **saturation**.\n\nTherefore:\n\n$$I_X = \\tfrac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2 \\quad (\\text{plus factor } (1+\\lambda V_X) \\text{ if } \\lambda \\neq 0)$$\n\n## The sketch\n\n```\n I_X\n  ^\n  |                                  *\n  |                                *\n  |                              *\n  |                            *\n  |                          *      ← square-law (saturation) curve,\n  |                        *          concave upward\n  |                      *\n  |                    *\n  |__________________*_________________________> V_X\n  0                 V_TH\n```\n\n**Key features to draw:**\n\n1. I_X = 0 along the horizontal axis for V_X < V_TH (cutoff).\n2. The curve leaves the V_X axis at **V_X = V_TH** with zero slope.\n3. For V_X > V_TH it rises as a **parabola** (square law), since the device stays in saturation for all V_X > V_TH — there is no triode-region \"flattening\" anywhere.\n4. (If channel-length modulation is included, the parabola tilts up slightly with slope ≈ λ·I_X, but the shape is otherwise the same.)\n\nPhysically, this is why a diode-connected transistor behaves as a nonlinear resistor whose small-signal resistance is 1/g_m: the I–V curve is a square law starting at V_TH.",
        "format": "markdown",
        "sha256": "13c94a66d9c8c946ecfdf3b86de60a29a8ce6fabbf33321840cd6600ec4e39d2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its cutoff below threshold, and saturation with a quadratic current rise above threshold. The optional channel-length-modulation note is appropriate.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 960,
        "output_tokens": 4688,
        "total_tokens": 5648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 960,
        "output_tokens": 4688,
        "total_tokens": 5648,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4194,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-004-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 4,
      "question": "Sketch IX versus VX in the circuit in the figure.",
      "figures": [
        "tasks/part1-004-sketch-ix-versus-vx/figure-01.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nIn this circuit the gate of M₁ is tied to its drain (diode‑connected device), the source is grounded, and V_X is applied from drain/gate to ground, with I_X measured into the drain.\n\n**Region of operation:** Since V_GS = V_DS = V_X, whenever the device is on we have\n\nV_DS = V_GS > V_GS − V_TH\n\nso M₁ is **always in saturation** when conducting.\n\n**Equations:**\n\n- For V_X ≤ V_TH: M₁ is off → I_X = 0\n- For V_X > V_TH: \n\n$$I_X = \\frac{1}{2}\\mu_n C_{ox}\\frac{W}{L}(V_X - V_{TH})^2 \\quad (\\times(1+\\lambda V_X)\\ \\text{if channel-length modulation is included})$$\n\n## The Sketch\n\nI_X is zero up to the threshold voltage, then rises with a square‑law (parabolic) shape, starting with zero slope at V_TH and becoming steeper as V_X increases:\n\n```\n I_X\n  ^\n  |                        |\n  |                       /\n  |                      /\n  |                     /\n  |                   _/\n  |                __/\n  |            __-'\n  |__________-'\n  0         V_TH --------------> V_X\n```\n\n**Key features to show on the sketch:**\n- I_X = 0 for V_X < V_TH (cutoff region, flat on the axis)\n- Curve \"turns on\" at V_X = V_TH with zero initial slope\n- Parabolic growth for V_X > V_TH (saturation region, since V_DS = V_GS)\n- (Optional refinement: with λ ≠ 0 the parabola rises slightly faster, but the shape is unchanged.)\n\nThis is the classic I–V characteristic of a **diode-connected MOSFET**, which behaves like a nonlinear resistor (approximately 1/g_m for small signals around a bias point).",
        "format": "markdown",
        "sha256": "5077d7a6935a4790bc6f55b34cc2ba736ca943246a5bfa787af0d84a9b965e26"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the diode-connected NMOS, its saturation operation when on, and the near-zero current below threshold followed by a quadratic rise above threshold. The optional channel-length-modulation note does not change the result.",
          "golden_solution_sha256": "769af5ac610bb7825c7abce92bf56d510d018662cbce83d47eef1dee2597750d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 960,
        "output_tokens": 3750,
        "total_tokens": 4710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 960,
        "output_tokens": 3750,
        "total_tokens": 4710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3311,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nFor M₁ (NMOS): source is grounded, gate is at V_X, and the drain is held at 1 V by the supply. Thus:\n\n- V_GS = V_X\n- V_DS = 1 V (constant)\n- I_X = I_D (the current delivered by the 1 V source into the drain)\n\nSo we just need I_D as a function of V_GS = V_X with V_DS fixed at 1 V. Let k = μₙC_ox(W/L).\n\n## Region-by-Region Behavior\n\n**Cutoff (V_X ≤ V_TH):**\nI_X = 0\n\n**Saturation (V_TH < V_X ≤ V_TH + 1 V):** here V_GS − V_TH ≤ V_DS = 1 V, so\n\nI_X = (k/2)(V_X − V_TH)²  → parabolic rise\n\n**Triode (V_X > V_TH + 1 V):** here V_GS − V_TH > V_DS, so with V_DS = 1 V:\n\nI_X = k[(V_X − V_TH)(1) − (1)²/2] = k(V_X − V_TH) − k/2  → straight line of slope k·V_DS = k\n\nAt the boundary V_X = V_TH + 1 V both expressions give I_X = k/2, and the slopes match (k), so the curve is continuous and smooth there.\n\n## Sketch\n\n```\n I_X\n  ^\n  |                                  /\n  |                                 /\n  |                                /   triode: linear,\n  |                               /    slope = k·V_DS = k\n  |                              /\n  |                             /\n  |                           ..\n  |                        ...     saturation:\n  |                     ...        parabola (k/2)(V_X−V_TH)²\n  |                  ...\n  |               ...\n  |............'''.........................> V_X\n  0           V_TH      V_TH + 1 V\n                          (I_X = k/2)\n```\n\n**Key features:**\n- I_X = 0 until V_X reaches V_TH.\n- Square-law (concave-up) growth while V_X − V_TH < 1 V (device saturated, since V_DS = 1 V).\n- Beyond V_X = V_TH + 1 V the device enters the triode region; because V_DS is fixed, I_D becomes *linear* in V_GS with slope k·V_DS, so the curve turns into a straight line (tangent to the parabola at the transition point, I_X = k/2).\n- If channel-length modulation is included, the parabola is simply scaled by (1 + λ·1 V); the overall shape is unchanged.",
        "format": "markdown",
        "sha256": "36065b2983e0b02df8495a8daf44421214d78847420680cc58bb3c25b42bf1e2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions and gives the required quadratic rise followed by a roughly linear rise beyond V_X = V_TH + 1 V. The optional channel-length-modulation comment does not affect the essential answer.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4080,
        "total_tokens": 5197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1117,
        "output_tokens": 4080,
        "total_tokens": 5197,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3478,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nFor M₁: **V_GS = V_X**, **V_DS = 1 V** (fixed by the supply), and **I_X = I_D**.\n\nSo as V_X is raised, the only thing that changes is V_GS, while V_DS stays at 1 V. The region of operation depends on how V_X − V_TH compares with V_DS = 1 V:\n\n**Cutoff (V_X ≤ V_TH):**\n$$I_X = 0$$\n\n**Saturation (V_TH ≤ V_X ≤ V_TH + 1 V)**, since V_DS = 1 V ≥ V_GS − V_TH:\n$$I_X = \\tfrac{1}{2}\\mu_n C_{ox}\\tfrac{W}{L}(V_X - V_{TH})^2$$\n\n**Triode (V_X ≥ V_TH + 1 V)**, since now V_GS − V_TH > V_DS:\n$$I_X = \\mu_n C_{ox}\\tfrac{W}{L}\\left[(V_X - V_{TH})(1) - \\tfrac{(1)^2}{2}\\right]$$\n\n## The Sketch\n\n```\n I_X\n  ^\n  |                                          /\n  |                                        /\n  |                                      /\n  |                                    /\n  |                                  /\n  |                               ,-'\n  |                            ,-'\n  |                         ,-'\n  |                      ,-'\n  |                   .-'\n  |                .-'\n  |             .-'\n  |------------'------------------------------------> V_X\n  0           V_TH        V_TH + 1 V\n```\n\n## Key Features\n\n- **Flat at zero** up to V_X = V_TH (device off).\n- **Parabolic (square‑law) rise** from V_TH to V_TH + 1 V while the device is saturated (V_DS = 1 V holds it in saturation as long as V_OV = V_X − V_TH < 1 V). At V_X = V_TH + 1 V, I_X = ½·μₙCₒₓ(W/L)(1 V)².\n- **Straight line** for V_X > V_TH + 1 V (triode region with fixed V_DS = 1 V), with constant slope μₙCₒₓ(W/L)·V_DS = μₙCₒₓ(W/L).\n- The transition at V_X = V_TH + 1 V is **smooth** (the parabola's slope there equals the triode line's slope), so there is no kink in the curve.\n\n(If channel‑length modulation is included, the saturated parabola tilts up slightly, but the overall shape — zero, square‑law, then linear — is unchanged.)",
        "format": "markdown",
        "sha256": "0fdfcf19fdeb7d8c0d55dfae30042c1242983ba18c0e9a7f43e3454e09b7ac75"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the cutoff, saturation, and triode regions, with a quadratic rise from V_TH to V_TH + 1 V and a roughly linear rise thereafter. The equations and smooth transition are also correct.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1117,
        "output_tokens": 3296,
        "total_tokens": 4413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1117,
        "output_tokens": 3296,
        "total_tokens": 4413,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 2695,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-005-sketch-ix-versus-vx",
      "part": "part1",
      "question_number": 5,
      "question": "Sketch IX versus VX in the circuit shown in the figure.",
      "figures": [
        "tasks/part1-005-sketch-ix-versus-vx/figure-02.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nIn this circuit M1 has:\n- **Source:** grounded → V_S = 0\n- **Gate:** V_GS = V_X\n- **Drain:** held at the supply → V_DS = 1 V (fixed)\n- **I_X** is the current delivered into the drain, i.e. I_X = I_D\n\nSince V_DS is constant at 1 V, the transistor's region of operation is decided entirely by V_X (= V_GS):\n\n**Cutoff (V_X ≤ V_TH):**\nI_X = 0\n\n**Saturation (V_TH ≤ V_X ≤ V_TH + 1 V):** here V_OV = V_X − V_TH < V_DS = 1 V, so\n\nI_X = ½ μ_n C_ox (W/L)(V_X − V_TH)²  (parabola)\n\n**Triode (V_X ≥ V_TH + 1 V):** now V_OV > V_DS, so with V_DS = 1 V:\n\nI_X = μ_n C_ox (W/L)[(V_X − V_TH)(1) − ½(1)²] = μ_n C_ox (W/L)(V_X − V_TH − 0.5)  (straight line, slope = μ_n C_ox W/L)\n\nAt the boundary V_X = V_TH + 1 V the two expressions match smoothly at I_X = ½ μ_n C_ox (W/L), and the parabola's slope there (μ_n C_ox(W/L)·V_OV = μ_n C_ox(W/L)) equals the triode-line slope, so the curve has no kink.\n\n## Sketch\n\n```\n I_X\n  ^\n  |                                          /\n  |                                         /\n  |                                        /   slope = μnCox(W/L)\n  |                                       /\n  |                                      /\n  |                                    ..\n  |                                  ..\n  |                                ..\n  |                              ..   parabola:\n  |                            ..     ½μnCox(W/L)(VX−VTH)²\n  |                          ..\n  |                        ..\n  |                      ..\n  |--------------------..\n  +---------|----------|------------------------------> V_X\n  0        V_TH      V_TH + 1\n```\n\n**Key features of the plot:**\n- Zero current up to V_X = V_TH (device off).\n- A square‑law (parabolic) rise from V_TH to V_TH + 1 V while the device is in saturation (V_DS = 1 V keeps it pinched off).\n- Beyond V_X = V_TH + 1 V the device enters the triode region and the characteristic becomes a straight line of slope μ_n C_ox (W/L)·V_DS = μ_n C_ox (W/L), reaching I_X = ½ μ_n C_ox (W/L) at the transition point.",
        "format": "markdown",
        "sha256": "98083d8a8d3a4552475793bd68dfc2de9c5c9d8ae8bab3f37c3dd39873cb8640"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies cutoff, the quadratic saturation-region rise up to V_TH + 1 V, and the roughly linear triode-region rise beyond it, with the appropriate current expressions.",
          "golden_solution_sha256": "da000995f2032c3caf224acfa4963413c96cebf89a3cc792e76c3a444d327ffc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1117,
        "output_tokens": 3685,
        "total_tokens": 4802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1117,
        "output_tokens": 3685,
        "total_tokens": 4802,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3052,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.**\n\nA MOSFET behaves as a (ideal) current source only when it is biased in **saturation with a fixed gate–source overdrive**: with V_GS held at a constant value above V_TH, the drain current I_D ≈ ½μC_ox(W/L)(V_GS − V_TH)² is essentially independent of the voltage across the drain–source terminals, so the device \"pushes/pulls\" a constant current.\n\nIn the circuit shown, however, the gate is tied to ground and one of the current‑carrying terminals is also tied to ground, so this condition cannot be met:\n\n- **If the grounded terminal is the source** (V_GS = 0): the transistor is below threshold, i.e., in **cut off**. It conducts (essentially) no current and looks like an **open circuit**, so it cannot establish or sustain a constant current I_X; the imposed current would simply drive the drain node to breakdown rather than defining a stable operating point.\n- **If the top terminal is the source** (gate and drain both grounded, i.e., a **diode‑connected** device): the device is always in saturation, but its gate–source voltage equals the terminal voltage V_X, so the current is I = ½μC_ox(W/L)(V_X − |V_TH|)², which **varies with the voltage across it**. Such a device behaves as a nonlinear resistor (small‑signal resistance ≈ 1/g_m), not as a current source.\n\nIn either interpretation the terminal current is not a voltage‑independent constant, so the device as connected **cannot act as a current source**. To obtain a current source, the gate must be held at a fixed bias voltage (V_GS > V_TH) while the current is taken from the drain, keeping the transistor in saturation.",
        "format": "markdown",
        "sha256": "c62e0f1cd4c10c60e00e48262d1e6ccc25d299ebdec20caebaaf72f7e2b3cf5a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that the diode-connected device is not a current source and identifies its low small-signal resistance (about 1/gm). It does not identify M1 as a PMOS and hedges the actual connections with an irrelevant alternative.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 438,
        "output_tokens": 11548,
        "total_tokens": 11986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 438,
        "output_tokens": 11548,
        "total_tokens": 11986,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11155,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No – not in this connection.**\n\n**Why:** In the figure, both the gate and the source of M₁ are tied to ground, so V_GS = 0. Since V_GS < V_TH, the transistor is in **cut‑off**: it conducts (essentially) no drain current no matter what voltage appears at the drain terminal. Looked at from the drain node (the terminal carrying I_X), the device is therefore just an **open circuit (a very large resistance)**, not a current source. If you try to force a current I_X into it, the device offers no regulated path for that current – the drain voltage simply runs away (toward junction breakdown) instead of the device absorbing a defined, constant current.\n\n**What a MOSFET current source requires:** A MOSFET behaves as a current source between drain and source only when it is biased in the **saturation region**, i.e.\n\n- V_GS > V_TH (fixed bias voltage on the gate), and\n- V_DS ≥ V_GS − V_TH.\n\nThen I_D ≈ ½·μ_n·C_ox·(W/L)(V_GS − V_TH)²·(1 + λV_DS), which is nearly independent of V_DS (large but finite output resistance r_o), so the device emulates a current source.\n\n**Conclusion:** With gate and source both grounded (V_GS = 0), M₁ is cut off and carries zero current; at best it is a trivial \"zero‑ampere\" source, i.e. an open switch. To act as a useful current source it would need V_GS > V_TH and saturation‑region operation, which this connection does not provide.",
        "format": "markdown",
        "sha256": "76516a548852ee37e30d151c0a3affe0ce57eb8f17a91d0176629cdfd5bdbeeb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "It misreads M1’s connections as an NMOS with gate and source grounded, then concludes it is off and an open circuit. The actual device is a diode-connected PMOS that presents low impedance, about 1/gm.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 438,
        "output_tokens": 9077,
        "total_tokens": 9515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 438,
        "output_tokens": 9077,
        "total_tokens": 9515,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8714,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-006-device-act-as-current-source",
      "part": "part1",
      "question_number": 6,
      "question": "Can the device shown in the figure act as a current source?",
      "figures": [
        "tasks/part1-006-device-act-as-current-source/figure-03.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.**\n\n**Identifying the connection:** The arrow marks the source terminal (the top node, where Iₓ is injected). The gate is tied to ground, and the drain (bottom terminal) is also tied to ground. So the gate and drain are shorted together: this is a **diode‑connected** transistor, and the terminal we are \"looking into\" is the *source*.\n\n**Why that fails as a current source:**\n\n- A MOSFET behaves as a current source only when it is in saturation with a **fixed V_GS**, and the current is sensed at the **drain**. Then the incremental resistance seen at that terminal is r_o (very large), so the current stays essentially constant even if the terminal voltage changes.\n- Here the current is sensed at the **source**, with gate and drain at AC ground. The small‑signal resistance seen at this terminal is\n\n  R ≈ r_o / (1 + g_m r_o) ≈ 1/g_m,\n\n  which is *small*, not large.\n- In DC terms, the terminal voltage Vₓ sets V_GS (V_GS = –Vₓ), so the current is tied to the node voltage by the square law, Iₓ = ½·k·(Vₓ – V_TH)². Any change in the terminal voltage produces a large change in the current — the opposite of current‑source behavior.\n\n**Conclusion:** Because the gate–drain short makes this a diode‑connected device presenting a low impedance (~1/g_m) at the terminal where Iₓ flows, the current through it is strongly voltage‑dependent. It acts as a diode (or a small resistor), **not** as a current source. To obtain a current source, the fixed gate–source bias must be applied separately and the current must be taken from the drain while the device remains in saturation.",
        "format": "markdown",
        "sha256": "76271650dbb9ab0fd9cf4d76cb1084f0e70117dee5b572e502d8af3dd2a85b82"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly concludes that the diode-connected device presents a low impedance of about 1/gm and cannot act as a current source, with its connections read correctly. It never identifies M1 as a PMOS, so it does not meet the full-credit rule; its voltage-polarity notation is also imprecise.",
          "golden_solution_sha256": "20b0fcb71c5ac038622c26f3ac86aaf2af15f4064029312681192c8362271780",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 438,
        "output_tokens": 12954,
        "total_tokens": 13392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 438,
        "output_tokens": 12954,
        "total_tokens": 13392,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12552,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n- The arrow on the **top** terminal points *into* the gate → that terminal is the **source of a PMOS** device (consistent with it being tied toward V_DD through R_S).\n- The bottom terminal is the **drain**; it carries R_D to ground and provides V_out.\n- The input drives the **gate**.\n\nTherefore this is a **common‑source (CS) stage with source degeneration**: input at the gate, output at the drain, and R_S in the source branch (to the AC ground V_DD). It is an inverting amplifier with series (negative) feedback via R_S.\n\n**Bias (DC):** I_D flows V_DD → R_S → source→drain → R_D → ground, with\nV_S = V_DD − I_D R_S, V_out = I_D R_D. Conduction requires V_SG = V_S − V_in ≥ |V_TH|, and saturation requires V_SD = V_S − V_out ≥ V_SG − |V_TH|.\n\n## 2. Small‑signal gain\n\nSmall‑signal model (V_DD = AC ground): v_gs = v_in − v_s, current source g_m v_gs and r_o between drain and source.\n\nKCL at source: g_m(v_in − v_s) + (v_out − v_s)/r_o = v_s/R_S\nKCL at drain: g_m(v_in − v_s) + (v_out − v_s)/r_o = −v_out/R_D\n\nHence v_s = −(R_S/R_D)·v_out. Substituting back:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1 + g_m R_S + \\dfrac{R_S + R_D}{r_o}}$$\n\nSpecial cases / checks:\n- r_o → ∞:  A_v = −g_m R_D/(1 + g_m R_S) = −R_D/(1/g_m + R_S)\n- R_S → 0:  A_v = −g_m (R_D ∥ r_o)  (plain CS stage)\n- Including body effect (bulk at V_DD): replace g_m R_S in the denominator by (g_m + g_mb) R_S.\n\n## 3. Input and output resistances\n\n- **Input:** gate only → R_in = ∞ (at low frequency).\n- **Output:** looking into the degenerated drain, R = r_o(1 + g_m R_S) + R_S, in parallel with R_D:\n\n$$R_{out} = R_D \\parallel \\big[\\,r_o(1 + g_m R_S) + R_S\\,\\big]$$\n\n## 4. Interpretation\n\nR_S acts as a **degeneration (negative‑feedback) resistor**: it lowers the gain from g_m(R_D∥r_o) to ≈ R_D/(1/g_m + R_S), but makes the gain set by a resistor ratio (more linear and stable), raises the output resistance, and desensitizes the bias point. The stage remains **inverting** (180° phase shift), as expected for a common‑source amplifier.\n\n**Summary:** PMOS degenerated common‑source stage; A_v = −g_m R_D / [1 + g_m R_S + (R_S+R_D)/r_o], R_in = ∞, R_out = R_D ∥ [r_o(1+g_m R_S)+R_S].",
        "format": "markdown",
        "sha256": "50013ec7dbae39e5e13519af3b75ab9e41ac87c71a746a2ed09e74bf3053d385"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain −gmRD/(1 + gmRS) in the ro → ∞ case. The additional ro and body-effect refinements are consistent with the essential analysis.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1210,
        "output_tokens": 7785,
        "total_tokens": 8995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7019,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1210,
        "output_tokens": 7785,
        "total_tokens": 8995,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7019,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the circuit\n\n- **Device type:** The arrow sits on the top terminal and points *into* the channel, and that terminal is tied toward V_DD through R_S. Hence the top terminal is the **source of a PMOS** transistor (source at the high‑potential side), the bottom terminal is the drain, and the gate receives V_in.\n- **Topology:** Input at the gate, output at the drain ⇒ **common‑source stage**. The resistor R_S between source and V_DD (an AC ground) acts as a **source‑degeneration resistor**, and R_D is the **drain (load) resistor**. So this is a *degenerated CS amplifier (PMOS version)*, an inverting voltage amplifier.\n\n## 2. DC bias\n\nA current I_D flows V_DD → R_S → source→drain → R_D → ground:\n\n- V_S = V_DD − I_D·R_S, V_D = I_D·R_D, V_SG = V_DD − I_D·R_S − V_in\n- Active (saturation) region requires V_SG > |V_TH| and V_SD ≥ V_SG − |V_TH|, i.e. **I_D·R_D ≤ V_in + |V_TH|**\n- I_D = ½ μ_p C_ox (W/L)(V_SG − |V_TH|)²(1 + λV_SD), with g_m = 2I_D/(V_SG − |V_TH|), r_o = 1/(λI_D)\n\n## 3. Small‑signal analysis\n\nWith V_DD and ground as AC grounds, KCL at source and drain nodes (v_s = source node voltage):\n\n- Source node: i_D = v_s/R_S\n- Drain node: i_D + v_out/R_D = 0 ⇒ v_s = −(R_S/R_D)·v_out\n- Device: i_D = g_m(v_in − v_s) + (v_out − v_s)/r_o\n\nSolving:\n\n**Voltage gain**\n\n$$A_v = \\frac{v_{out}}{v_{in}} = -\\frac{g_m R_D}{1 + g_m R_S + \\frac{R_D + R_S}{r_o}} \\;\\approx\\; -\\frac{R_D}{1/g_m + R_S}\\quad (r_o \\to \\infty)$$\n\n(With body effect, replace g_m R_S by (g_m + g_mb) R_S.)\n\n**Input impedance:** R_in = ∞ (gate terminal, low frequency).\n\n**Output impedance:**\n\n$$R_{out} = R_D \\parallel \\big[\\,r_o + R_S + (g_m + g_{mb})\\,r_o R_S\\,\\big]$$\n\n## 4. Interpretation / checks\n\n- **Inverting:** raising V_in reduces |V_GS| of the PMOS, I_D falls, and v_out = I_D·R_D falls ⇒ negative gain.\n- **Limits:** R_S = 0 → simple CS stage, A_v = −g_m(R_D ∥ r_o); R_S ≫ 1/g_m → A_v ≈ −R_D/R_S (gain set by resistor ratio, linearized).\n- **Role of R_S:** degeneration reduces gain by (1 + g_m R_S), but improves linearity, stabilizes the bias point, and boosts the impedance seen at the drain (though the achievable output resistance is capped by R_D).\n- **Output swing:** v_out can swing from ≈ 0 (device near cutoff) up to the point where M1 leaves saturation (V_out ≈ V_in + |V_TH|).\n\n**Summary:** The circuit is a PMOS common‑source amplifier with source degeneration R_S and load R_D, giving gain A_v = −g_m R_D / [1 + g_m R_S + (R_D+R_S)/r_o], infinite input resistance, and output resistance R_D ∥ [r_o + R_S + (g_m+g_mb)r_o R_S].",
        "format": "markdown",
        "sha256": "2c6a7a68bd8962002f5da11d41a4d2f007e5752cfe77928b6f67f9e006bc27f6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS common-source stage with source degeneration and gives the inverting gain, with valid refinements for output resistance and body effect.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1210,
        "output_tokens": 8301,
        "total_tokens": 9511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1210,
        "output_tokens": 8301,
        "total_tokens": 9511,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7419,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-007-pmos-common-source-source-degeneration",
      "part": "part1",
      "question_number": 7,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-007-pmos-common-source-source-degeneration/figure-04.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\n- **Device:** M₁ is a **PMOS** transistor (source arrow on the top terminal, pointing into the channel). Its **source** is the top terminal (tied through R_S to V_DD), its **drain** is the bottom terminal, and the **gate** is the input. This is consistent with the resistor labels: R_S sits in the source branch, R_D in the drain branch.\n- **Topology:** Input at the gate, output at the drain, source connected to AC ground (V_DD) through R_S ⇒ this is a **common‑source (CS) stage with source degeneration R_S and load resistor R_D**. It is an inverting voltage amplifier.\n\n## DC (bias) relations\n\nThe same current I_D flows through R_S, M₁, and R_D:\n\n- V_S = V_DD − I_D·R_S, V_out = V_D = I_D·R_D\n- Conduction requires V_SG = V_DD − I_D·R_S − V_in > |V_TH|\n- Saturation requires V_SD ≥ V_SG − |V_TH| ⇔ **V_out = I_D·R_D ≤ V_in + |V_TH|**\n\nSo R_S sets (together with V_in) the bias current, and R_D sets the output DC level.\n\n## Small‑signal analysis\n\nWith v_in at the gate, v_s at the source node, v_d = v_out at the drain node, and including r_o:\n\n- Source node KCL: i = v_s/R_S (i = drain→source device current)\n- Drain node KCL: v_out = −i·R_D\n- Device: i = g_m(v_in − v_s) + (v_d − v_s)/r_o\n\nSolving:\n\n**Voltage gain**\n\nA_v = v_out/v_in = − g_m·R_D / [ 1 + g_m·R_S + (R_S + R_D)/r_o ]\n\nFor r_o → ∞ (ideal transistor):\n\nA_v ≈ − g_m·R_D / (1 + g_m·R_S) = − R_D / (1/g_m + R_S)\n\n**Input resistance:** R_in = ∞ (gate terminal, at low frequency).\n\n**Output resistance:** looking into the degenerated drain gives r_o + R_S + g_m·r_o·R_S, in parallel with R_D:\n\nR_out = R_D ∥ [ r_o + R_S + g_m·r_o·R_S ] ≈ R_D ∥ (g_m·r_o·R_S);  if r_o → ∞, R_out = R_D.\n\n## Interpretation / design comments\n\n- **Inverting amplifier:** the minus sign confirms the CS nature (raising V_in reduces |V_GS| of the PMOS, reducing I_D and raising V_out... equivalently, gain is negative).\n- **Role of R_S (degeneration):** it reduces the gain from g_m·R_D to ≈ R_D/(1/g_m + R_S), but makes the gain depend on a resistor ratio (more linear, less sensitive to g_m), and boosts the output resistance seen at the drain. It also consumes headroom (drops I_D·R_S between V_DD and the source).\n- **Role of R_D:** converts the drain current to the output voltage; it limits R_out and, together with I_D, sets the output DC level and swing.\n- **Limiting cases:** if R_S → 0 (or is bypassed by a large capacitor), A_v → −g_m·R_D (plain CS stage). If g_m·R_S ≫ 1, A_v → −R_D/R_S (resistor-ratio amplifier).\n- Compared with the other single-transistor stages: taking the output at the source instead would give a source follower; driving the source instead of the gate would give a common-gate stage. As wired, it is the degenerated common-source stage.\n\n**Summary:** PMOS common-source amplifier with source degeneration R_S and drain load R_D; A_v = −g_m R_D/[1 + g_m R_S + (R_S+R_D)/r_o], R_in = ∞, R_out = R_D ∥ [(1+g_m r_o)R_S + r_o].",
        "format": "markdown",
        "sha256": "87d2e3fd6e197f09bbbffc1d0a36fcf8aba013ecf9606f2a310af859fffe0ac3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the PMOS source-degenerated common-source stage and gives the correct inverting gain, including the finite-ro refinement, satisfying the golden full-credit rule. The stated direction of the Vout change is a minor internal sign slip.",
          "golden_solution_sha256": "cd8fcec5f92210366117d02bce0f4174b55a012666155b3dfc965be2c669f3a3",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1210,
        "output_tokens": 10110,
        "total_tokens": 11320,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1210,
        "output_tokens": 10110,
        "total_tokens": 11320,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9175,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\n- **M₁** is an NMOS transistor (arrow on the source terminal pointing out of the device).\n- The **drain** is tied directly to V_DD (an AC ground), the **input** drives the gate, and the **output** is taken at the source, across R_S.\n\n⇒ This is a **common‑drain stage (source follower)**.\n\n## DC (Large‑Signal) Behavior\n\n- **Vin < V_TH:** M₁ is off, I_D = 0 → V_out = 0.\n- **Vin > V_TH:** M₁ conducts. With I_D = ½·μₙC_ox(W/L)(V_GS − V_TH)² and V_out = I_D·R_S, and V_GS = Vin − V_out:\n\n  V_out = Vin − V_TH − √(2·V_out/(μₙC_ox·W/L·R_S))\n\n  i.e. the source voltage \"follows\" the gate, shifted down by one V_GS (level shifting).\n- **Saturation check:** V_DS = V_DD − V_out ≥ V_GS − V_TH ⇔ **Vin ≤ V_DD + V_TH**. So M₁ stays in saturation for essentially the whole useful input range; the output swing is 0 ≤ V_out ≤ V_DD − V_OV.\n\n## Small‑Signal Voltage Gain\n\nWith v_gs = v_in − v_out, the drain at AC ground, and including r_o, KCL at the source node:\n\ng_m(v_in − v_out) − v_out/r_o = v_out/R_S\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m}{g_m + \\frac{1}{r_o} + \\frac{1}{R_S}} = \\frac{g_m(r_o \\| R_S)}{1 + g_m(r_o \\| R_S)}$$\n\nIgnoring r_o (and body effect):\n\n$$A_v = \\frac{g_m R_S}{1 + g_m R_S} = \\frac{R_S}{R_S + 1/g_m} \\;<\\; 1,\\quad \\text{non‑inverting,} \\approx 1 \\text{ if } g_m R_S \\gg 1$$\n\n(If the body is grounded, add g_mb to the denominator: A_v = g_m/(g_m + g_mb + 1/r_o + 1/R_S), which slightly reduces the gain.)\n\n## Input and Output Resistance\n\n- **Input resistance:** R_in = ∞ (insulated gate, no gate bias resistor shown) — ideal for sensing a voltage.\n- **Output resistance:** kill v_in and look into the output node; the source terminal presents ≈1/g_m (since v_gs = −v_x):\n\n$$R_{out} = \\frac{1}{g_m} \\,\\|\\, r_o \\,\\|\\, R_S \\approx \\frac{1}{g_m} \\| R_S$$\n\na low value, so the stage can drive heavy loads.\n\n## Summary of Properties\n\n| Property | Result |\n|---|---|\n| Topology | Common‑drain (source follower) |\n| Gain | Slightly less than 1, non‑inverting |\n| R_in | Very high (∞ at DC) |\n| R_out | Low (≈ 1/g_m ∥ R_S) |\n| DC shift | V_out = V_in − V_GS (level shifter) |\n| Bias limit | Saturation held for V_in ≤ V_DD + V_TH |\n\n**Function:** a voltage buffer / impedance transformer (and level shifter): it reproduces the input voltage at the output with nearly unity gain while converting a high‑impedance source into a low‑impedance drive, e.g., for output stages or driving cables/load resistances. If an external load R_L is attached at V_out, simply replace R_S by R_S ∥ R_L in all expressions.",
        "format": "markdown",
        "sha256": "b92e985af8dada9e08f3d8e9f17e4765c1c43ce1c7d3737260ab47daa069cdb1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain gm·RS/(1 + gm·RS). The additional small-signal refinements are consistent with the topology.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 952,
        "output_tokens": 7127,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 952,
        "output_tokens": 7127,
        "total_tokens": 8079,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6259,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nLooking at the topology:\n\n- **Gate** of M₁ = input node (V_in)\n- **Drain** of M₁ = tied to V_DD (an AC ground)\n- **Source** of M₁ = output node (V_out), connected to ground through R_S\n\nThe input is applied to the gate, the output is taken from the source, and the drain is common (AC ground). Therefore this is a **common‑drain stage, i.e., a source follower** (NMOS, since the source arrow points out of the device toward R_S).\n\n## DC (Bias) Behavior\n\n- V_out = V_S = V_in − V_GS → the circuit shifts the DC level down by one V_GS.\n- With M₁ in saturation: I_D = ½·μ_nC_ox(W/L)(V_GS − V_TH)² = V_out/R_S\n- Cutoff for V_in < V_TH (then V_out = 0).\n- Saturation requires V_DS = V_DD − V_out ≥ V_GS − V_TH (i.e., V_out ≤ V_DD − V_OV), which sets the upper swing limit.\n\n## Small‑Signal Analysis\n\nEquivalent circuit: v_gs = v_in − v_out; a current g_m·v_gs flows into the source node; r_o (if included) connects source to AC‑grounded drain; R_S from source to ground.\n\n**KCL at the output node:**\n\ng_m(v_in − v_out) − v_out/r_o = v_out/R_S\n\n**Voltage gain:**\n\nA_v = v_out/v_in = g_m(R_S ∥ r_o) / [1 + g_m(R_S ∥ r_o)]\n\nIdealized (r_o → ∞):\n\n**A_v = g_m R_S / (1 + g_m R_S) = R_S / (R_S + 1/g_m)**  → positive, slightly less than 1.\n\nIntuition (T‑model): the follower is just a voltage divider between R_S and the resistance 1/g_m looking into the source.\n\n**Input resistance:**\n\nR_in = ∞ (insulated gate; at high frequency limited only by gate capacitances, which are small here because C_gs is barely multiplied by (1 − A_v) ≈ 0).\n\n**Output resistance** (kill v_in, look into the output):\n\nR_out = R_S ∥ (1/g_m) ∥ r_o ≈ 1/g_m  (low)\n\nIf the body effect is included (bulk grounded): replace g_m by (g_m + g_mb), giving A_v = (g_m+g_mb)(R_S∥r_o)/[1+(g_m+g_mb)(R_S∥r_o)] and R_out = R_S ∥ r_o ∥ 1/(g_m+g_mb).\n\n## Summary of Properties\n\n| Quantity | Result |\n|---|---|\n| Configuration | Common drain (source follower) |\n| Voltage gain | g_mR_S/(1+g_mR_S) < 1, non‑inverting |\n| Input resistance | Very high (≈ ∞ for MOS gate) |\n| Output resistance | Low, ≈ (1/g_m) ∥ R_S |\n| DC shift | V_out = V_in − V_GS (level shifter) |\n| Current/power gain | High (voltage buffer action) |\n\n## Conclusion\n\nThe circuit is a **source follower (common‑drain amplifier)**. It provides nearly unity, non‑inverting voltage gain, transforms a high‑impedance source into a low‑impedance output (R_out ≈ 1/g_m), and is therefore used as a **voltage buffer / output stage** and as a **DC level shifter**, rather than as a gain stage.",
        "format": "markdown",
        "sha256": "e24f11c6a46c371b641adb2f5cef3bf3a2e2028ee90ad41d27845216cdf1b26e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain gm·R_S/(1 + gm·R_S), satisfying the full-credit rule. Output-resistance details are supplementary.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 952,
        "output_tokens": 7157,
        "total_tokens": 8109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 952,
        "output_tokens": 7157,
        "total_tokens": 8109,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-008-source-follower",
      "part": "part1",
      "question_number": 8,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-008-source-follower/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\n- **M1** is an NMOS transistor (arrow on the source terminal pointing away from the channel).\n- **Gate** = input node (V_in)\n- **Drain** = tied to V_DD → an AC ground\n- **Source** = output node (V_out), loaded by R_S to ground\n\nSince the input is at the gate, the output is at the source, and the drain is common (AC ground), this is a **common‑drain stage, i.e., a source follower**.\n\n## DC (Large‑Signal) Behavior\n\n- KVL: V_GS = V_in − V_out, and the drain current is set by the resistor: I_D = V_out / R_S.\n- Saturation check: V_GD = V_in − V_DD ≤ 0 < V_TH, so whenever M1 is on it operates in **saturation** (the drain is at the highest potential in the circuit).\n- Transfer characteristic: (1/2)μ_n C_ox (W/L)(V_in − V_out − V_TH)² = V_out/R_S.\n\nThus V_out \"follows\" V_in, shifted down by one V_GS: **V_out ≈ V_in − V_GS**. As V_in rises, I_D rises and V_GS increases only slightly (√I_D dependence), so the output tracks the input nearly one‑for‑one.\n\n## Small‑Signal Voltage Gain\n\nWith the drain at AC ground, KCL at the source node (including r_o from source to AC‑grounded drain):\n\ng_m(v_in − v_out) = v_out/R_S + v_out/r_o\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_m (R_S \\parallel r_o)}{1 + g_m (R_S \\parallel r_o)} \\approx \\frac{g_m R_S}{1 + g_m R_S} = \\frac{R_S}{R_S + 1/g_m}$$\n\n- 0 < A_v < 1, **non‑inverting**, approaching unity when g_m R_S ≫ 1.\n- With body effect (bulk grounded): replace the denominator's g_m by (g_m + g_mb), slightly reducing the gain.\n\n## Input Resistance\n\nThe gate draws no DC/low‑frequency current:\n\n$$R_{in} = \\infty$$\n\n## Output Resistance\n\nZeroing v_in and looking into the output node: the transistor presents (1/g_m)‖r_o looking into its source, in parallel with R_S:\n\n$$R_{out} = \\frac{1}{g_m} \\parallel r_o \\parallel R_S \\approx \\frac{1}{g_m} \\parallel R_S$$\n\nThis is a **low** output resistance.\n\n## Summary and Interpretation\n\n| Quantity | Value |\n|---|---|\n| Topology | Common‑drain (source follower) |\n| Voltage gain | g_m(R_S‖r_o)/[1+g_m(R_S‖r_o)] ≈ 1 (slightly less), non‑inverting |\n| Input resistance | ∞ (very high) |\n| Output resistance | (1/g_m)‖R_S‖r_o (low) |\n| DC shift | V_out = V_in − V_GS (level shifter) |\n| Output swing | 0 ≤ V_out ≤ V_in,max − V_GS |\n\n**Function:** the stage is a **voltage buffer**. It does not amplify voltage, but it converts impedance levels — presenting nearly infinite resistance to the source and driving loads from a low resistance (≈1/g_m). It is therefore used to isolate a high‑impedance signal source from a heavy load (output stage of amplifiers, probe buffers, level shifting by one V_GS). Its inherent bias property — always in saturation while on — makes it robust and linear enough for buffering applications.",
        "format": "markdown",
        "sha256": "978857de9b936704029c7c6c64a5d1d97a19954ecd05809c5a79cc8c107b6ab8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and gives its positive, less-than-unity gain, including the equivalent expression with finite output resistance. The golden solution's full-credit rule is satisfied.",
          "golden_solution_sha256": "8f23ff232475a4bec79b12629414fe11fc7b9c6e9609b2ebcfc0e4ed2a0839d7",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 952,
        "output_tokens": 5219,
        "total_tokens": 6171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 952,
        "output_tokens": 5219,
        "total_tokens": 6171,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4367,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nReading the symbol: the gate of M₁ (right‑hand plate) is tied to the V_DD rail, the terminal with the arrow (the **source**) is driven directly by V_in, and the **drain** connects to the output node, which is pulled up to V_DD through R_D.\n\n- Gate → AC ground (V_DD)\n- Input → source\n- Output → drain\n\n**This is a common‑gate (CG) stage** (grounded‑gate amplifier), with R_D as the drain/load resistor.\n\n## DC (Bias) Operation\n\n- V_GS = V_DD − V_in, so M₁ is on only if V_in < V_DD − V_TH.\n- Saturation drain current: I_D = ½ μ_n C_ox (W/L)(V_DD − V_in − V_TH)²\n- Output level: V_out = V_DD − I_D R_D\n- Saturation requires V_DS ≥ V_GS − V_TH ⇒ **V_out ≥ V_DD − V_TH** (independent of V_in). Thus the allowable output swing is only from V_DD − V_TH up to V_DD — a headroom limitation of tying the gate to V_DD.\n- Note the input source must sink the DC bias current I_D (direct coupling).\n\n## Small‑Signal Analysis\n\nWith the gate at AC ground and the body grounded: v_gs = −v_in, v_bs = −v_in. Writing KCL at the drain node (v_out):\n\n−v_out/R_D = −(g_m + g_mb)v_in + (v_out − v_in)/r_o\n\n**Voltage gain (non‑inverting):**\n\nA_v = [(g_m + g_mb)r_o + 1]·R_D / (R_D + r_o) ≈ (g_m + g_mb)R_D ≈ g_m R_D (r_o → ∞)\n\n(v_in ↑ ⇒ V_GS ↓ ⇒ I_D ↓ ⇒ drop on R_D ↓ ⇒ V_out ↑: no inversion.)\n\n**Input resistance** (looking into the source):\n\nR_in = (R_D + r_o)/[(g_m + g_mb)r_o + 1] ≈ 1/(g_m + g_mb) ≈ 1/g_m  (low)\n\n**Output resistance** (looking into the drain, ideal input source ⇒ source at AC ground):\n\nR_out = r_o ∥ R_D ≈ R_D\n\n## Key Characteristics / Remarks\n\n- **Non‑inverting gain** of magnitude ≈ g_m R_D, similar to a CS stage, but with **very low input impedance** (≈1/g_m): suitable for buffering current, interfacing low‑impedance sources (cable/antenna matching, RF LNA inputs), and as the building block of cascodes.\n- **Body effect helps here:** since v_bs = v_gs, g_mb adds to the effective transconductance (g_m + g_mb), unlike in a degenerated CS stage.\n- **Good high‑frequency behavior:** the grounded gate shields input from output; C_GD is not Miller‑multiplied.\n- **Trade‑offs:** low R_in loads the signal source (overall gain from a source with resistance R_S is A_v·R_in/(R_in+R_S)), the output swing is limited to [V_DD − V_TH, V_DD], and the driving source must carry the bias current.\n\n**Summary:** Common‑gate amplifier; A_v ≈ g_m R_D (non‑inverting), R_in ≈ 1/g_m, R_out ≈ R_D, biased by V_in with V_GS = V_DD − V_in and valid while V_out ≥ V_DD − V_TH.",
        "format": "markdown",
        "sha256": "9e2164e4bcafffea1fcdf08de6bb40e35e845b917334972c7c22c89c8f4de5d6"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate stage and gives the non-inverting gain and low input resistance consistent with the golden solution. The additional analysis does not change the essential conclusion.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 918,
        "output_tokens": 11544,
        "total_tokens": 12462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 918,
        "output_tokens": 11544,
        "total_tokens": 12462,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10754,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThe transistor M₁ has its **gate tied to V_DD** (an AC ground), the **input applied to the source**, and the **output taken at the drain**, which is connected to V_DD through the load resistor R_D. This is a **common‑gate (CG) amplifier**.\n\n## DC (Bias) Considerations\n\n- Gate voltage: V_G = V_DD; source voltage: V_S = V_in,DC. The device is on if V_DD − V_in,DC > V_TH.\n- Drain current flows from V_DD through R_D into the drain: V_out = V_DD − I_D·R_D.\n- Saturation requires V_DS ≥ V_GS − V_TH, i.e. **V_out ≥ V_DD − V_TH**. Hence the drop across R_D is limited to I_D·R_D ≤ V_TH, which constrains the swing and the achievable gain (this is the main drawback of biasing the gate at V_DD).\n\n## Small‑Signal Analysis\n\nWith v_gs = −v_in (gate at AC ground) and neglecting body effect (source tied to body):\n\n**Voltage gain.** KCL at the drain node, including r_O:\n\n−v_out/R_D = −g_m·v_in + (v_out − v_in)/r_O  ⇒  **A_v = (g_m·r_O + 1)·R_D / (R_D + r_O)**\n\n- Ideal transistor (r_O → ∞): **A_v = g_m·R_D** — same magnitude as a common‑source stage, but **non‑inverting** (v_in ↑ ⇒ V_GS ↓ ⇒ I_D ↓ ⇒ v_out ↑).\n- With body effect: replace g_m by (g_m + g_mb).\n\n**Input resistance** (looking into the source):\n\n**R_in = (R_D + r_O) / (1 + g_m·r_O) ≈ 1/g_m** (low input impedance; independent of R_D when r_O → ∞).\n\n**Output resistance** (with v_in = 0 the source is grounded, so v_gs = 0):\n\n**R_out = R_D ∥ r_O ≈ R_D**.\n\n## Summary of Properties\n\n| Quantity | Value (r_O → ∞) |\n|---|---|\n| Voltage gain | +g_m·R_D (non‑inverting) |\n| Input resistance | ≈ 1/g_m (low) |\n| Output resistance | ≈ R_D (moderately high) |\n| Frequency behavior | No Miller multiplication of C_GD ⇒ good high‑frequency response |\n\n**Interpretation/applications:** The CG stage acts as a **current buffer**: it accepts a current at its low‑impedance source node and delivers it to the high‑impedance drain node. It is used where a low input impedance is desired (e.g., matching to a 50 Ω source, amplifying signals from current‑type outputs) and in cascode configurations to raise output impedance and improve bandwidth. Its penalties here are the limited headroom (I_D·R_D ≤ V_TH because the gate sits at V_DD) and the low input resistance, which loads down any voltage source with series resistance.",
        "format": "markdown",
        "sha256": "e2bb8db4975e9e1b30bc09856135d940844fd127f25dfe0b4442058b88928cfd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-driven common-gate topology and gives the non-inverting gain and low input resistance, including a consistent finite-ro expression. The additional bias and application discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 918,
        "output_tokens": 7767,
        "total_tokens": 8685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 918,
        "output_tokens": 7767,
        "total_tokens": 8685,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7071,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-009-common-gate-source-input",
      "part": "part1",
      "question_number": 9,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-009-common-gate-source-input/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the Topology\n\nTrace the connections:\n\n- **Gate of M₁** → tied directly to the V_DD rail → the gate is at **AC ground**.\n- **Input V_in** → applied to the terminal with the arrow, i.e. the **source**.\n- **Output V_out** → taken at the **drain**, which is loaded by R_D to V_DD.\n\nInput at source, output at drain, gate common (grounded for AC) ⇒ this is a **common‑gate (CG) stage** (NMOS, with R_D as the drain load). Note also that V_DD biases the gate: V_GS = V_DD − V_in,DC, so the input DC level sets the bias current.\n\n## Small‑Signal Analysis\n\nUsing the model with g_m, g_mb (body effect, since the source is not at body potential) and r_o:\n\n**Voltage gain.** A rise in v_in raises v_s, which *lowers* v_gs = −v_s, reducing I_D and hence the drop across R_D, so v_out rises → **non‑inverting**. KCL at the drain node gives:\n\nA_v = v_out/v_in = [(g_m + g_mb)·r_o + 1]·R_D / (R_D + r_o)\n\nLimits:\n- r_o → ∞: A_v = (g_m + g_mb)·R_D\n- Ignore r_o and body effect: **A_v = g_m·R_D** (positive, same magnitude as a common‑source stage with the same load)\n\n**Input resistance** (looking into the source, with load R_D):\n\nR_in = (R_D + r_o) / [1 + (g_m + g_mb)·r_o]  →  **≈ 1/(g_m + g_mb)** (≈ 1/g_m if r_o → ∞)\n\nSo the CG stage presents a **low input impedance**.\n\n**Output resistance** (with an ideal input source, v_gs = v_bs = 0 when looking in):\n\nR_out = R_D ∥ r_o  →  **≈ R_D** (neglecting r_o). With a source resistance R_s in series with the input, R_out = R_D ∥ [(1 + (g_m+g_mb)r_o)R_s + r_o].\n\n**Bias/saturation check:** M₁ needs V_GS = V_DD − V_in,DC > V_TH, and saturation requires V_out,DC = V_DD − I_D·R_D ≥ V_G − V_TH = V_DD − V_TH.\n\n## Summary of Properties\n\n| Quantity | Result (simple model) |\n|---|---|\n| Configuration | Common‑gate (gate at AC ground via V_DD) |\n| Gain | +g_m·R_D (non‑inverting); (g_m+g_mb)R_D with body effect |\n| R_in | ≈ 1/g_m (low) |\n| R_out | ≈ R_D (relatively high) |\n| Frequency behavior | Good: gate grounding avoids Miller multiplication of C_GD; low R_in pushes the input pole high |\n\n**Typical uses:** current buffer / voltage‑to‑current interface, impedance matching to low‑impedance sources (e.g., RF cables, LNA input), and as the cascode device in cascoded amplifiers, precisely because it combines low input resistance, non‑inverting gain, and good high‑frequency response. Its main drawback is the low input impedance, which loads down high‑impedance signal sources (overall gain then becomes ≈ R_D/(R_s + 1/g_m)·… i.e., attenuated by the R_in–R_s divider).",
        "format": "markdown",
        "sha256": "be1ea7cb2f93cd6df7bfa93da97d0c027a72a89fffc771ef3403f5c9b34020a9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate topology and gives the non-inverting gain and low source input resistance. The added finite-ro and body-effect analysis is consistent; the minor limiting-condition imprecision does not affect the main result.",
          "golden_solution_sha256": "1b3a848197667846074404db3b3d8871ff2129384f8d686f3624e0319ea90d69",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 918,
        "output_tokens": 7903,
        "total_tokens": 8821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 918,
        "output_tokens": 7903,
        "total_tokens": 8821,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7096,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit topology\n\n- **M₁** has its gate tied to a fixed bias voltage **V_b**, its drain loaded by **R_D** (to V_DD) with the output **V_out** taken at the drain, and its source connected to the node where **C₁** couples in **V_in**.\n- This is the skeleton of a **common‑gate (CG) stage**: input at the source, output at the drain, gate at AC ground.\n\n## DC (bias) analysis\n\n- The source node is at 0 V, so V_GS = V_b. If V_b > V_TH, M₁ conducts:\n I_D = ½ μₙC_ox (W/L)(V_b − V_TH)² (saturation assumed)\n- Output DC level: V_out = V_DD − I_D·R_D, valid in saturation as long as V_out ≥ V_b − V_TH.\n- C₁ blocks DC, so V_in does not disturb the bias point.\n\n## Small‑signal analysis (as drawn)\n\nHere is the catch: **the source node is directly connected to ground**, and C₁ feeds the input into that same node.\n\n- Source node: v_s = 0 (hard ground). Gate: v_g = 0 (V_b is an ideal DC source).\n- Therefore v_gs = 0 ⇒ i_d = g_m·v_gs = 0 ⇒ **v_out = 0**.\n- Voltage gain: **A_v = v_out/v_in = 0**. All of the signal current delivered through C₁ is shunted straight to ground; none modulates M₁.\n- Impedances as drawn: Z_in = 1/(sC₁) (looking into a shorted node); Z_out = R_D ∥ r_O (with v_gs = 0 the drain simply sees r_O to ground).\n\nSo, **as drawn, the circuit does not amplify**: the ground at the source shorts out the input signal.\n\n## Intended operation (proper common‑gate)\n\nIf the direct ground at the source node is replaced by a DC bias element that is open at AC (e.g., a current source or large inductor), or the bias is arranged so the source node is not an AC short, the stage behaves as a standard CG amplifier:\n\n- **Gain:** A_v ≈ (g_m + g_mb)(R_D ∥ r_O) ≈ g_m·R_D — **non‑inverting**\n- **Input resistance** (at the source node): R_in ≈ 1/(g_m + g_mb) — low input impedance, characteristic of CG\n- **Output resistance:** R_out ≈ R_D ∥ r_O ≈ R_D\n- C₁ then serves its normal role of blocking DC while passing the signal to the low‑impedance source node.\n\n## Conclusion\n\nThe figure shows a common‑gate configuration (input → source via C₁, gate biased at V_b, output at drain through R_D). However, because the source node is tied directly to ground, v_gs = 0 for any input signal and the small‑signal gain is zero. For the stage to work as intended (A_v ≈ g_m R_D, R_in ≈ 1/g_m, R_out ≈ R_D), the source node must be grounded only for DC through a high‑impedance bias element, leaving it free to swing at signal frequencies.",
        "format": "markdown",
        "sha256": "e2bb73f42d045c49ca417f154baab64123db1685a418381598ababc63397bf84"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input signal is shunted and the ideal small-signal voltage gain is zero. The additional common-gate discussion does not change that conclusion.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 10546,
        "total_tokens": 12015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9821,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1469,
        "output_tokens": 10546,
        "total_tokens": 12015,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9821,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Topology\n\n- **M₁** is an n‑channel MOSFET whose **gate** is tied to a fixed bias voltage $V_b$ (an AC ground).\n- The **drain** is connected to $V_{DD}$ through $R_D$, and the output $V_{out}$ is taken at the drain.\n- The **source** node is tied **directly to ground**, and the input $V_{in}$ is coupled to this same node through $C_1$.\n\nSo the circuit is *drawn* as a **common‑gate stage** (input at source, output at drain, gate at AC ground), but with the source node hard‑grounded.\n\n## DC (Bias) Analysis\n\n- $V_S = 0$, $V_G = V_b \\Rightarrow V_{GS} = V_b$. If $V_b > V_{TH}$, the device is on:\n$$I_D = \\tfrac{1}{2}\\mu_n C_{ox}\\tfrac{W}{L}(V_b - V_{TH})^2 \\quad (\\text{saturation, if } V_{DS} \\ge V_b - V_{TH})$$\n- $V_{out} = V_{DD} - I_D R_D$. The bias point is well defined (no DC current flows through $C_1$).\n\n## Small‑Signal Analysis\n\n- The source node is connected to an ideal ground, so $v_s = 0$ no matter what $V_{in}$ does. The gate is also at AC ground ($v_g = 0$).\n- Therefore $v_{gs} = 0 \\Rightarrow g_m v_{gs} = 0$: the transistor produces **no signal current**.\n- The entire input signal is dropped across $C_1$ (the signal current $v_{in}\\,sC_1$ simply flows from the source into the ground node).\n- Hence:\n$$v_{out} = 0,\\qquad A_v = \\frac{v_{out}}{v_{in}} = 0$$\n- Input impedance: $Z_{in} = \\frac{1}{sC_1}$ (just the capacitor into a grounded node).\n- Output impedance: $R_{out} = R_D \\parallel r_O$ (with $v_{gs}=0$ the transistor looks like $r_O$).\n\n## Conclusion / Interpretation\n\nAs drawn, the circuit **cannot amplify**: grounding the source node shorts out the input signal delivered through $C_1$, so $v_{gs}$ never changes and $V_{out}$ stays at its DC value. This is a classic design error in a common‑gate stage — the source node must be free to swing for the input to modulate the transistor.\n\n**To make it work as a common‑gate amplifier**, the direct ground at the source should be replaced by a bias current source (or a resistor) to establish $I_D$ while allowing AC swing. Then, at frequencies where $C_1$ is a short:\n\n- Voltage gain: $A_v \\approx g_m R_D$ (more exactly $\\frac{[(g_m+g_{mb})r_O + 1]R_D}{R_D + r_O}$)\n- Input impedance: $R_{in} \\approx \\frac{1}{g_m+g_{mb}}$ (low, characteristic of CG)\n- Output impedance: $R_{out} \\approx R_D \\parallel r_O$\n- Non‑inverting gain, with good high‑frequency behavior (no Miller multiplication of $C_{GD}$).\n\n**Bottom line:** the intended topology is common‑gate, but with the source hard‑grounded as shown, $v_{gs}=0$ and the small‑signal gain is zero.",
        "format": "markdown",
        "sha256": "1b481a5cb2333226b3703ddb30ae06ea27e7b810e4b585d015333a5a3c8886eb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that the source is hard-shorted to ground, so the input produces no source swing and the ideal small-signal gain is zero.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1469,
        "output_tokens": 11101,
        "total_tokens": 12570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1469,
        "output_tokens": 11101,
        "total_tokens": 12570,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10286,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-010-source-input-shorted-to-ground",
      "part": "part1",
      "question_number": 10,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-010-source-input-shorted-to-ground/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit topology\n\n- **M₁** is an n‑channel MOSFET whose **gate** is held at a fixed bias voltage V_b (an AC ground), whose **drain** is connected to the output node V_out (loaded by R_D to V_DD), and whose **source** is the bottom terminal.\n- The input signal V_in is coupled through capacitor C₁ to the source node.\n- Hence the intended configuration is a **common‑gate (CG) stage** – but note the critical detail: the source node is also **tied directly to ground**.\n\n## DC (bias) analysis\n\nWith the source at 0 V and the gate at V_b:\n\n- V_GS = V_b, so I_D = ½ μₙC_ox (W/L)(V_b − V_TH)² (assuming saturation, i.e. V_out ≥ V_b − V_TH).\n- V_out,DC = V_DD − I_D·R_D.\n\nSo the transistor is properly biased, and C₁ blocks this DC level from the signal source.\n\n## Small‑signal analysis (as drawn)\n\nThe source node is hard‑wired to ground. Therefore:\n\n- v_s = 0 regardless of v_in: the signal delivered through C₁ is **short‑circuited to ground** at the source node.\n- The gate is at AC ground (V_b constant), so v_gs = v_g − v_s = 0, and g_m·v_gs = 0.\n- No signal current flows in R_D, hence **v_out = 0**.\n\n**Result: A_v = v_out/v_in = 0.** The circuit, as drawn, cannot amplify: the ground connection at the source node kills the input signal before it can modulate V_GS.\n\n## Impedances\n\n- Looking in from V_in: Z_in = 1/(sC₁), since C₁ terminates on a grounded node.\n- Looking out at V_out: R_out = R_D ∥ r_O ≈ R_D (with v_gs = 0 the transistor contributes no signal current).\n\n## Remark – intended common‑gate operation\n\nFor this to work as a CG amplifier, the direct ground at the source must be replaced by a biasing element (e.g., a current source or resistor), so that the input signal actually appears at the source terminal. Then, with v_s = v_in and v_g = 0:\n\n- **Voltage gain:** A_v = +g_m·R_D (non‑inverting; include g_mb and r_O refinements as (g_m+g_mb)R_D / (1 + …) if body effect and r_O matter).\n- **Input resistance:** R_in ≈ 1/g_m (low input impedance, characteristic of CG).\n- **Output resistance:** R_out ≈ R_D.\n\n**Summary:** the schematic is a common‑gate stage (input at source via C₁, gate biased at V_b, output at drain through R_D), but because the source node is directly grounded, the input signal is shorted to ground and the literal small‑signal gain of the circuit as drawn is zero; removing that ground connection restores the standard CG behavior A_v ≈ g_m·R_D with R_in ≈ 1/g_m and R_out ≈ R_D.",
        "format": "markdown",
        "sha256": "f42c1032ea7857423767ed6801bfc417e391ac77d00352d28606094650bb9339"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-to-ground short, explains that the input signal cannot modulate the transistor, and concludes the ideal gain is zero, satisfying the full-credit rule.",
          "golden_solution_sha256": "4fa501e147a166a71d6aa33565bbe693318d65c0c8c788e7a5087eb13c71d3ea",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1469,
        "output_tokens": 12682,
        "total_tokens": 14151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1469,
        "output_tokens": 12682,
        "total_tokens": 14151,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11977,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning:**\n\n- **C_SB contributes nothing:** The source of M₁ is tied directly to ground, so C_SB has both terminals at ground potential. It is shorted out and stores no independent energy → no pole.\n- **Remaining capacitors:** C_GS (gate–ground), C_GD (gate–drain), and C_DB (drain–ground). These three capacitors form a closed loop (gate → drain → ground → gate), so their voltages are constrained by KVL (v_CGD = v_CGS − v_CDB). Only **two** independent state variables exist — e.g., the gate node voltage V_X and the drain node voltage V_out.\n- Equivalently, the circuit has only two independent dynamic nodes (the gate node and the drain/output node), so the transfer function V_out/V_in is a second‑order polynomial in s.\n\nTherefore the circuit is a two‑pole system: one pole associated with the input node (R_S charging C_GS and the Miller‑multiplied C_GD) and one with the output node (R_D loading C_DB and C_GD).\n\n**Answer: 2 poles.**",
        "format": "markdown",
        "sha256": "7e48d1387c9795c2ea46f292857673b0a1d0ed8fb3431c13e2b381bae92ec8f2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is shorted out and that C_GS, C_GD, and C_DB have only two independent capacitor voltages, establishing two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1585,
        "output_tokens": 6238,
        "total_tokens": 7823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1585,
        "output_tokens": 6238,
        "total_tokens": 7823,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning:**\n\n- **C_SB is irrelevant:** The source of M₁ is tied directly to ground, so C_SB connects ground to ground (it is shorted out) and stores no independent energy → contributes no pole.\n- **Remaining capacitors:** C_GS (gate node to ground), C_DB (drain node to ground), and C_GD (between gate and drain). These three capacitors form a loop (gate → ground → drain → gate), so only **two** of their voltages are independent.\n- **Independent state variables:** The circuit has only two dynamic nodes — the gate node (V_X) and the drain/output node (V_out). Writing KCL at these two nodes yields a second‑order system:\n\n$$\\frac{V_{out}}{V_{in}} = \\frac{-g_m R_D + s C_{GD} R_D}{1 + s[a] + s^2[b]}$$\n\nwith a denominator of degree 2 (C_GD also introduces a zero, but not an extra pole).\n\n**Therefore the circuit has 2 poles.**",
        "format": "markdown",
        "sha256": "27f327555d6066212c3c930fe5e92cb9403be267e4ebdee1d78ba37572d8ef64"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that C_SB is shorted by the grounded source and that C_GS, C_GD, and C_DB have only two independent capacitor voltages, giving two poles.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1585,
        "output_tokens": 3372,
        "total_tokens": 4957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1585,
        "output_tokens": 3372,
        "total_tokens": 4957,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3132,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-011-many-poles-have",
      "part": "part1",
      "question_number": 11,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-011-many-poles-have/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning:**\n\n- **C_SB is irrelevant:** the source of M₁ is tied directly to ground, so C_SB sits between ground and ground (shorted out) and stores no independent energy.\n- **Remaining capacitors:** C_GS (gate node → ground), C_DB (drain node → ground), and C_GD (gate node → drain node).\n- **Independent state variables:** Only two node voltages can change independently — the gate node (V_X) and the drain node (V_Y). The voltage on C_GD is just V_X − V_Y, i.e., dependent on the other two capacitor voltages (the three capacitors form a loop through ground). Hence the network has only **2 independent energy‑storing elements**.\n\nWriting KCL at the gate and drain nodes yields a second‑order transfer function:\n\nV_out/V_in = (1 − sC_GD/g_m) · (−g_m R_D) / [1 + s(a) + s²(b)]\n\nwith the s² term involving combinations of C_GS, C_GD, and C_DB.\n\n**Therefore the circuit has 2 poles** (one associated with the input/gate node and one with the output/drain node).",
        "format": "markdown",
        "sha256": "7429e68e29be6ca27d406c80647c6afc0f180f131f6566fb93da340f2fadd760"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two poles and justifies the count by noting that C_SB is shorted out and the remaining capacitor voltages have only two independent degrees of freedom.",
          "golden_solution_sha256": "d6e2d72c604ae3c83e7b25306ecb7ec85736574c7dd1a3f26a206b697a6dabfe",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1585,
        "output_tokens": 6364,
        "total_tokens": 7949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1585,
        "output_tokens": 6364,
        "total_tokens": 7949,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the circuit\n\n- **M₁** has its **source** tied to the input terminal V_in, its **drain** at the output node (V_out), and its **gate** connected to the node V_F.\n- **R_D** is the drain load resistor to V_DD; the output V_out is taken at the drain.\n- **R₁–R₂** form a resistive divider from V_out to ground; its midpoint V_F is returned to the **gate**.\n\nSo the signal enters through the source (common‑gate‑like forward path), while a fraction of the output voltage is returned to the gate.\n\n## 2. Feedback topology and polarity\n\n- **Sensing:** the divider R₁–R₂ connects directly across the output → **voltage (shunt) sensing**.\n- **Mixing:** the transistor responds to V_GS = V_F − V_in, i.e. the feedback voltage is subtracted from the input in series → **series (voltage) mixing**.\n- **Polarity check:** V_out ↑ ⇒ V_F ↑ ⇒ V_GS ↑ ⇒ I_D ↑ ⇒ V_out ↓. The loop is **negative**.\n\n⇒ **Series–shunt (voltage–voltage) feedback**: the circuit is a voltage amplifier. (Analogy: source = non‑inverting input, gate = inverting input, exactly like an op‑amp non‑inverting stage.)\n\n## 3. Open‑loop gain and feedback factor\n\nFeedback factor (divider): β = R₂/(R₁+R₂).\n\nOpening the loop at the gate (no gate current) and keeping the loading of the divider (R₁+R₂) on the output node, the forward amplifier is a common‑gate stage with load R_L = R_D ‖ (R₁+R₂):\n\n- A₀ = g_m·[R_D ‖ (R₁+R₂)]\n- Loop gain: T = β·A₀ = [R₂/(R₁+R₂)]·g_m·[R_D ‖ (R₁+R₂)]\n\n## 4. Closed‑loop gain\n\nExact node analysis (r_o neglected) gives\n\nA_v = V_out/V_in = g_m R_D / [1 + R_D/(R₁+R₂) + g_m R_D·R₂/(R₁+R₂)] = A₀/(1+T).\n\nFor T ≫ 1:\n\n**A_v ≈ 1/β = 1 + R₁/R₂**, independent of g_m — a precise, device‑insensitive voltage gain.\n\n## 5. Input and output impedances\n\nConsistent with series mixing (raises R_in) and shunt sensing (lowers R_out), with R_L = R_D ‖ (R₁+R₂):\n\n- **R_in = (1+T)/g_m = 1/g_m + [R₂/(R₁+R₂)]·R_L** (without feedback it would be 1/g_m)\n- **R_out = R_L/(1+T) = [R_D ‖ (R₁+R₂)]/(1+T)** (without feedback it would be R_D ‖ (R₁+R₂))\n\nIf R₁+R₂ ≫ R_D, these simplify to R_in ≈ (1+β g_m R_D)/g_m and R_out ≈ R_D/(1+β g_m R_D). Including r_o only requires replacing R_D by R_D ‖ r_o in R_L and T.\n\n## 6. Summary\n\n| Quantity | Expression |\n|---|---|\n| Topology | Series–shunt (voltage–voltage), negative |\n| β | R₂/(R₁+R₂) |\n| Open‑loop gain A₀ | g_m[R_D ‖ (R₁+R₂)] |\n| Loop gain T | β·A₀ |\n| Closed‑loop gain | A₀/(1+T) → 1 + R₁/R₂ |\n| R_in | (1+T)/g_m |\n| R_out | [R_D ‖ (R₁+R₂)]/(1+T) |\n\n**Interpretation:** the circuit is a single‑transistor realization of a non‑inverting amplifier: feedback forces V_F ≈ V_in, so V_out ≈ V_in(1+R₁/R₂), with desensitized gain, raised input resistance, and lowered output resistance — the classic signatures of voltage–voltage feedback. (The divider also supplies the gate DC bias, so no separate bias network is needed.)",
        "format": "markdown",
        "sha256": "b707e6a719e639701a1be1af38b5f786ef3d1269fe382abfbb3a8e014a7128df"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative feedback. The closed-loop gain is also algebraically consistent with the golden solution; the extra impedance discussion does not undermine the essential analysis.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1354,
        "output_tokens": 11343,
        "total_tokens": 12697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1354,
        "output_tokens": 11343,
        "total_tokens": 12697,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10349,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Topology\n\n**What is connected to what:**\n- M₁ (NMOS) has its **source** driven by V_in, its **drain** loaded by R_D (to V_DD), and its **gate** tied to the node V_F.\n- R₁–R₂ form a voltage divider from V_out to ground; the tap voltage V_F = V_out·R₂/(R₁+R₂) is applied to the gate.\n- The output is taken at the drain.\n\n**Feedback identification:**\n- **Sensing:** the divider connects in parallel with the output → **voltage (shunt) sampling**.\n- **Mixing:** the feedback voltage appears at the gate while the input drives the source, so the transistor responds to v_GS = v_F − v_in → **series (voltage) comparison**.\n- Hence this is a **series–shunt (voltage–voltage) negative-feedback** loop, whose forward amplifier is a **common-gate stage**.\n\n**Sign check (negative feedback):** v_in ↑ → v_GS ↓ → i_D ↓ → v_out ↑ → v_F ↑ → v_GS ↑ (opposes the initial change). ✔\n\n## Open-Loop (\"A\") Circuit and Feedback Factor\n\nSince the gate draws no current, the divider only loads the output with (R₁+R₂). Opening the loop (grounding the gate) leaves a CG stage with load R_L′ = R_D ∥ (R₁+R₂):\n\n- **A₀ = g_m·R_L′ = g_m·[R_D ∥ (R₁+R₂)]**  (non-inverting, as expected for CG)\n- **β = R₂/(R₁+R₂)**\n- Loop gain **T = βA₀ = g_m·[R_D ∥ (R₁+R₂)]·R₂/(R₁+R₂)**\n\n## Closed-Loop Gain\n\nKCL at the output node with v_GS = βv_out − v_in:\n\ng_m(βv_out − v_in) + v_out/R_D + v_out/(R₁+R₂) = 0\n\n$$A_{cl} = \\frac{v_{out}}{v_{in}} = \\frac{g_m R_L'}{1 + g_m \\beta R_L'} = \\frac{A_0}{1+\\beta A_0}$$\n\nFor large loop gain (T ≫ 1), the gain becomes set by the feedback network alone:\n\n$$A_{cl} \\approx \\frac{1}{\\beta} = 1 + \\frac{R_1}{R_2}$$\n\n(non-inverting, op-amp-like formula), independent of g_m.\n\n## Input and Output Resistances\n\n- **Input (looking into the source):** series mixing *raises* R_in. Direct test-source analysis gives\n R_in = (1/g_m)(1 + T)  (open-loop value 1/g_m multiplied by the desensitivity factor).\n- **Output:** voltage sampling *lowers* R_out. With v_in = 0 and a test voltage v_t at the drain, i_t = v_t/R_L′ + g_m β v_t, so\n R_out = [R_D ∥ (R₁+R₂)] / (1 + T)  (further reduced by r_o if included: open-loop R_out = R_D ∥ (R₁+R₂) ∥ r_o, then divided by 1+T).\n\n## Summary\n\n| Quantity | Expression |\n|---|---|\n| Topology | Series–shunt (voltage–voltage), negative feedback; CG forward amplifier |\n| β | R₂/(R₁+R₂) |\n| Open-loop gain A₀ | g_m·[R_D ∥ (R₁+R₂)] |\n| Closed-loop gain | A₀/(1+βA₀) ≈ 1 + R₁/R₂ (for βA₀ ≫ 1) |\n| R_in | (1/g_m)(1+βA₀) — increased |\n| R_out | [R_D ∥ (R₁+R₂)]/(1+βA₀) — decreased |\n\n**Remarks:** The feedback is direct-coupled, so it also stabilizes the DC bias point (V_G = V_out,DC·R₂/(R₁+R₂)). Including r_o (and body effect) merely modifies A₀ and the open-loop resistances; the structure A₀/(1+βA₀), R_in,open(1+T), R_out,open/(1+T) remains valid. The circuit thus behaves as a well-defined, non-inverting voltage amplifier whose gain is fixed by the resistor ratio 1 + R₁/R₂.",
        "format": "markdown",
        "sha256": "cb21b1215c6bc1f9cfda56a4a75bb650f46e06c266304b0d563a715bf9c25b53"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-divider feedback to the gate, and negative-feedback action. The closed-loop gain is also correct; the additional resistance discussion does not contradict the essential model.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1354,
        "output_tokens": 14737,
        "total_tokens": 16091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1354,
        "output_tokens": 14737,
        "total_tokens": 16091,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-012-source-input-resistive-feedback",
      "part": "part1",
      "question_number": 12,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-012-source-input-resistive-feedback/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Recognizing the structure\n\n- **M₁** has the input signal applied to its **source** and the output taken at its **drain** (through R_D): it is a **common‑gate (CG) stage** (non‑inverting gain).\n- **R₁–R₂** form a voltage divider from the output node back to the **gate**: they sample V_out and return the feedback voltage V_F = β·V_out to the gate, with \n\n  β = R₂/(R₁+R₂).\n\n- **Topology:** the output voltage is sampled (shunt connection at the output), and at the input the feedback voltage is compared in *series* with V_in, since the controlling voltage is V_GS = V_F − V_in. ⇒ **Series–shunt (voltage–voltage) feedback** → the circuit behaves as a voltage amplifier.\n\n**Polarity check:** V_in↑ → V_GS↓ → I_D↓ → V_out↑ → V_F↑ → V_GS↑ (opposes the initial change) ⇒ **negative feedback** (it also stabilizes the bias point by the same loop).\n\n## 2. Gain\n\nSmall signal: v_gs = β·v_out − v_in, i_d = g_m·v_gs, and at the output node v_out = −i_d·R_L′ with R_L′ = R_D ∥ (R₁+R₂) (divider loading):\n\n- Open-loop gain: A₀ = g_m·R_L′\n- Loop gain: T = A₀·β = g_m·R_L′·R₂/(R₁+R₂)\n- Closed-loop gain:\n\n  A_cl = v_out/v_in = A₀/(1+T) = g_m·R_L′ / (1 + g_m·R_L′·R₂/(R₁+R₂))\n\nIf T ≫ 1, the gain becomes set by the feedback network only:\n\n  A_cl ≈ 1/β = **1 + R₁/R₂**  (non‑inverting, like an op‑amp non‑inverting stage)\n\n*Exact result (including r_o and body effect g_mb):*\nA_cl = (g_m + g_mb + 1/r_o)·R_D / [1 + R_D/(R₁+R₂) + R_D/r_o + g_m·R_D·R₂/(R₁+R₂)]\n\n## 3. Input and output resistances\n\n- **Input (seen from V_in, i.e., into the source):** series mixing *raises* it. The current drawn from the source is i_in = g_m(v_in − β·v_out) = g_m·v_in/(1+T), so\n\n  R_in = (1+T)/g_m  (instead of 1/g_m for a plain CG stage).\n\n- **Output:** voltage sampling *lowers* it. Killing v_in and testing the output node:\n\n  R_out = R_L′/(1+T),  R_L′ = R_D ∥ (R₁+R₂)  (instead of ≈ R_D).\n\n## 4. Summary of feedback effects\n\n| Quantity | Without feedback | With feedback |\n|---|---|---|\n| Gain | g_m·R_L′ | g_m·R_L′/(1+T) → 1+R₁/R₂ if T≫1 |\n| R_in | 1/g_m | (1+T)/g_m (increased) |\n| R_out | R_D∥(R₁+R₂) | divided by (1+T) (decreased) |\n| Bandwidth, bias stability | – | improved by (1+T) |\n\n**Bottom line:** this is a common‑gate amplifier embedded in a **negative voltage–voltage (series–shunt) feedback loop** formed by the R₁–R₂ divider returning a fraction of V_out to the gate. The loop desensitizes the gain (which approaches 1 + R₁/R₂), raises the input resistance, and lowers the output resistance, making the stage act as a well‑defined voltage amplifier.",
        "format": "markdown",
        "sha256": "617c47ace427db33ffe9d5aa73fe8020a56218903bf67303d9b9c6d0f8b93311"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source input, output-to-gate divider feedback, and negative-feedback polarity, and gives the correct closed-loop gain and high-loop-gain limit. These satisfy the full-credit rule.",
          "golden_solution_sha256": "c4eb57e96a0e70ff6aa718bcfd4e80be89f93bd2bf97d638ee206a2ecd64f575",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1354,
        "output_tokens": 11985,
        "total_tokens": 13339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1354,
        "output_tokens": 11985,
        "total_tokens": 13339,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n- **M₁:** gate = input, drain tied to V_DD (an AC ground), output taken at its source → **common‑drain stage (source follower)**.\n- **M₂:** gate held at a fixed bias V_b, source at ground, drain at the output → it carries a fixed current and therefore acts as a **constant‑current‑sink (current‑source) load**.\n- Both arrows point out of the source → both devices are NMOS.\n\nSo the circuit is a **source follower with a current‑source load** (a unity‑gain buffer / level shifter).\n\n## 2. Bias current\n\nWith the output open, I_D1 = I_D2. If V_out ≥ V_b − V_TH2 (M₂ saturated):\n\nI₁ = ½ μₙC_ox (W/L)₂ (V_b − V_TH2)²  (≈ constant, independent of V_in and V_out)\n\nThis is the key feature: the follower's bias current is **fixed**, so g_m1 = √(2μₙC_ox(W/L)₁I₁) is constant → constant gain and good linearity.\n\n## 3. Large‑signal transfer characteristic\n\n- **V_in ≤ V_TH1:** M₁ off. M₂ (in deep triode) pulls the node down: **V_out = 0**.\n- **Transition (V_in just above V_TH1):** M₁ saturated, M₂ in triode; V_out rises nonlinearly from 0 until V_out = V_b − V_TH2.\n- **Following region (M₁ sat, M₂ sat):** since I_D1 = I₁ is constant, V_GS1 is constant:\n\n  V_out = V_in − V_GS1 = V_in − V_TH1 − √(2I₁ / (μₙC_ox (W/L)₁))\n\n  i.e. unity slope with a **downward level shift of V_GS1**. Valid while V_out ≥ V_b − V_TH2 and V_in ≤ V_DD (M₁ stays saturated because V_GD1 = V_in − V_DD ≤ 0). Maximum output: V_out,max = V_DD − V_GS1.\n\nWith λ and body effect the slope is slightly less than 1 and mildly nonlinear.\n\n## 4. Small‑signal behavior\n\nAt the output node (v_gs1 = v_in − v_out, v_bs1 = −v_out, M₂ contributes only r_O2 since v_gs2 = 0):\n\ng_m1(v_in − v_out) = v_out(g_mb1 + g_ds1 + g_ds2)\n\n- **Voltage gain:**\n A_v = g_m1 / (g_m1 + g_mb1 + g_ds1 + g_ds2) = g_m1(r_O1‖r_O2) / [1 + (g_m1+g_mb1)(r_O1‖r_O2)] ≈ 1 − (g_mb1+g_ds1+g_ds2)/g_m1\n Slightly less than unity (exactly 1 if λ = γ = 0).\n- **Output resistance:**\n R_out = 1/(g_m1 + g_mb1 + g_ds1 + g_ds2) = [1/(g_m1+g_mb1)] ‖ r_O1 ‖ r_O2 ≈ 1/g_m1 → **low**.\n- **Input resistance:** infinite at DC (gate input); input capacitance is small because C_GS1 is bootstrapped (×(1−A_v)).\n\n## 5. Summary of properties\n\n| Property | Result |\n|---|---|\n| Configuration | Source follower (common drain) + current‑source load |\n| Gain | ≈ 1 (slightly less due to g_mb, g_ds) |\n| Level shift | V_out = V_in − V_GS1 |\n| R_in / R_out | ∞ / ≈ 1/g_m1 ‖ r_O2 |\n| Useful swing | V_b − V_TH2 ≤ V_out ≤ V_DD − V_GS1 |\n| Drive capability | Strong pull‑up (M₁ sources current), pull‑down limited to I₁ → asymmetric slewing |\n\n**Role of M₂:** replacing a resistor with a current source keeps I_D1 (hence g_m1) constant over the swing, giving a linear, near‑unity gain and a large effective load resistance (r_O2), at the cost of headroom (V_out must stay above V_OD2 = V_b − V_TH2). If M₁'s body cannot be tied to its source, the body effect (g_mb1) further reduces the gain and adds slight nonlinearity. Overall, the circuit is a **voltage buffer / level shifter**.",
        "format": "markdown",
        "sha256": "cb9193a444421c760ecc0e3ec4f6d56108bc40485089594876dd34d333850012"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as an NMOS current-source load, and gives the positive, slightly sub-unity gain with the appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 10659,
        "total_tokens": 11638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 10659,
        "total_tokens": 11638,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9614,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\nBoth devices are n‑channel MOSFETs (arrow on the source pointing out):\n\n- **M₁:** gate = V_in, drain = V_DD, source = V_out → **common‑drain stage (source follower)**.\n- **M₂:** gate = fixed bias V_b, source = ground, drain = V_out → with V_GS2 = V_b constant, M₂ operates in saturation as a **constant current sink (current‑source load)** that biases M₁.\n\nSo the circuit is a **source follower with an active (current‑source) load**, i.e. a unity‑gain buffer / level shifter.\n\n## 2. Bias and large‑signal behavior\n\nWith M₂ saturated (V_out ≥ V_b − V_TH2), it fixes the branch current:\n\nI_D = ½ μ_nC_ox (W/L)₂ (V_b − V_TH2)² = constant.\n\nThe same current flows in M₁ (output node draws no DC current), so V_GS1 is constant:\n\nV_GS1 = V_TH1 + √[2I_D / (μ_nC_ox (W/L)₁)]  ⇒  **V_out = V_in − V_GS1**\n\nThe transfer characteristic is a straight line of slope 1, shifted down by V_GS1 (level shifting).\n\n**Valid output swing:**\n- Lower limit (M₂ stays saturated): V_out,min = V_b − V_TH2 (= V_OD2)\n- Upper limit (M₁ stays saturated: V_in − V_DD ≤ V_TH1): V_out,max = V_DD − V_OD1\n\n## 3. Small‑signal voltage gain\n\nAC grounds: V_DD and V_b. For M₁: v_gs1 = v_in − v_out, v_bs1 = −v_out, v_ds1 = −v_out. For M₂: v_gs2 = v_bs2 = 0, so it contributes only r_o2. KCL at the output node:\n\ng_m1(v_in − v_out) − g_mb1 v_out − v_out/r_o1 = v_out/r_o2\n\n**A_v = v_out/v_in = g_m1 / (g_m1 + g_mb1 + 1/r_o1 + 1/r_o2) = g_m1(r_o1‖r_o2) / [1 + (g_m1 + g_mb1)(r_o1‖r_o2)]**\n\n- Ignoring body effect and r_o: A_v ≈ 1 (follower action).\n- The body‑effect term g_mb1 is the main reduction: A_v ≈ 1/(1+η), η = g_mb/g_m ≈ 0.1–0.3.\n- Intuition: since M₂ forces a constant current, V_GS1 cannot change; hence v_out must follow v_in exactly.\n\n## 4. Input and output resistance\n\n- **R_out** (set v_in = 0): looking into the node, M₁'s source presents 1/(g_m1+g_mb1) ‖ r_o1, in parallel with M₂'s r_o2:\n\n  **R_out = [1/(g_m1 + g_mb1)] ‖ r_o1 ‖ r_o2 ≈ 1/g_m1 (low)**  (note A_v = g_m1·R_out)\n\n- **R_in:** gate of M₁ → essentially infinite at DC; the input capacitance is small, C_in ≈ C_GD1 + C_GS1(1−A_v), because A_v ≈ 1 (no Miller multiplication).\n- (An external load R_L simply adds a 1/R_L term in the gain denominator and in parallel with R_out.)\n\n## 5. Function and practical remarks\n\n- **Purpose:** voltage buffer / impedance transformer (high R_in, low R_out, A_v ≈ 1), and DC level shifter (shifts the level down by V_GS1).\n- **Advantages:** linear unity‑gain transfer (constant bias current ⇒ constant V_GS1), low output impedance good for driving capacitive loads.\n- **Limitations:** gain slightly below 1 (body effect of M₁, finite r_o's); DC offset of one V_GS1; output swing restricted to [V_b − V_TH2, V_DD − V_OD1]; M₁'s body effect can be removed by connecting its bulk to its source (if the process allows), and the gain can be pushed closer to 1 by replacing M₂ with a cascode current source (larger r_o2).\n\n**Summary:** the circuit is a source follower (M₁) biased by an NMOS current source (M₂); it provides A_v = g_m1/(g_m1+g_mb1+g_ds1+g_ds2) ≈ 1, R_in → ∞, R_out ≈ 1/(g_m1+g_mb1) ‖ r_o1 ‖ r_o2, with V_out = V_in − V_GS1 within the swing limits above.",
        "format": "markdown",
        "sha256": "0038c4fdb0c4a27bcdbb8362f6d8913f1b13fa0c6daa1f6bb10147790eb2ccdc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a source follower and M2 as its NMOS current-source load, with positive gain slightly below unity and the appropriate body-effect and finite-output-resistance expression.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 8019,
        "total_tokens": 8998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 8019,
        "total_tokens": 8998,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-013-source-follower-current-source-load",
      "part": "part1",
      "question_number": 13,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-013-source-follower-current-source-load/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\n- **M₁** (gate = V_in, drain = V_DD, source = V_out): an NMOS in **common‑drain (source‑follower)** configuration.\n- **M₂** (gate = V_b = constant, source = ground, drain = V_out): an NMOS biased with a fixed gate voltage, i.e. a **saturated current source (current‑sink load)** defining the bias current of M₁.\n- Output is taken at the source of M₁ / drain of M₂.\n\nSo the circuit is a **source follower with a current‑source load** – a voltage buffer / level shifter.\n\n## Bias (Large‑Signal) Behavior\n\nWith no load current drawn at V_out, M₂ forces a constant current:\n\nI_D = ½ μₙC_ox (W/L)₂ (V_b − V_TH2)²\n\nThis same current flows through M₁, fixing its gate–source voltage:\n\nV_GS1 = V_TH1 + √(2I_D / (μₙC_ox (W/L)₁))  ⇒  **V_out = V_in − V_GS1**\n\nThus the stage shifts the DC level down by ≈ V_TH + V_OD while (ideally) tracking the input. Because I_D is constant, V_GS1 stays nearly constant → good linearity (unlike a follower with a resistive load).\n\n## Small‑Signal Analysis\n\n**Voltage gain** (KCL at V_out, noting V_DD is an AC ground and M₂ contributes only r_o2):\n\nA_v = gm1 / (gm1 + gmb1 + 1/r_o1 + 1/r_o2) = **gm1(r_o1 ∥ r_o2) / [1 + (gm1 + gmb1)(r_o1 ∥ r_o2)]**\n\n- If r_o1, r_o2 → ∞ and no body effect: A_v → 1 (unity, non‑inverting).\n- With body effect (M₁'s body at ground): A_v ≈ gm1/(gm1 + gmb1) = 1/(1 + η) ≈ 0.8–0.9.\n\n**Output resistance:**\n\nR_out = (1/(gm1 + gmb1)) ∥ r_o1 ∥ r_o2 ≈ 1/(gm1 + gmb1)  → low, as expected for a buffer.\n\n**Input resistance:** essentially infinite at low frequency (gate terminal); the input capacitance is also small because C_GS is bootstrapped (both plates move together).\n\n## Swing and Saturation Limits\n\n- **M₁** is always in saturation while on: V_GD1 = V_in − V_DD ≤ 0 < V_TH.\n- **M₂** stays in saturation only if V_out ≥ V_b − V_TH2 = V_OD2 → sets the minimum output: V_out,min = V_OD2.\n- Maximum output (for V_in,max = V_DD): V_out,max = V_DD − V_GS1.\n- Hence the usable swing is V_OD2 ≤ V_out ≤ V_DD − (V_TH1 + V_OD1), costing one V_GS of headroom at the top.\n\n## Summary / Purpose\n\n| Property | Result |\n|---|---|\n| Topology | Source follower (common drain) + current‑source load |\n| Gain | Slightly < 1, non‑inverting (≈ 1/(1+η)) |\n| R_in | Very high (gate) |\n| R_out | Low, ≈ 1/(gm1+gmb1) |\n| DC function | Level shift down by V_GS1; constant bias current ⇒ linear buffering |\n\nThe circuit is used as a **voltage buffer/impedance transformer and level shifter**: it drives low‑impedance loads without loading the input stage. Its main imperfections are the body effect (reduces gain below unity and adds nonlinearity) and the V_GS headroom/level‑shift loss at the output.",
        "format": "markdown",
        "sha256": "6eefb194c34650f976fd5449cf19f0f77ec67b0d1ce27f69631f292720793317"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and current-sink load, and gives a positive gain at or slightly below unity with the appropriate body-effect and output-resistance refinements.",
          "golden_solution_sha256": "9c0eaf5035e4eafe98a151f1035fd6512be41f7b78831b9e6cd3dd9618a8eb67",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 7801,
        "total_tokens": 8780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 979,
        "output_tokens": 7801,
        "total_tokens": 8780,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6917,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThe figure shows a **CMOS inverter** (complementary MOS pair):\n\n- **M₁**: NMOS, common‑source (source → ground, drain → V_out)\n- **M₂**: PMOS, common‑source (source → V_DD, drain → V_out)\n- Gates tied together = input V_in; drains tied together = output V_out\n\n(The arrow into the channel on M₂'s top terminal marks it as a PMOS with source at V_DD; the arrow out of M₁'s bottom terminal marks an NMOS with source at ground.)\n\n## DC Operation / Transfer Characteristic\n\n**1. V_in ≤ V_TH1 (input low):** M₁ is cut off. No current flows, so M₂ has V_DS2 ≈ 0 (deep triode) and acts as a closed switch:\n**V_out = V_DD (V_OH)**\n\n**2. V_in ≥ V_DD − |V_TH2| (input high):** M₂ is cut off. M₁ carries no current and sits in deep triode:\n**V_out = 0 (V_OL)**\n\n**3. V_TH1 < V_in < V_DD − |V_TH2| (transition):** Both devices conduct.\n- Just above V_TH1: M₁ saturated, M₂ triode → V_out falls slowly from V_DD.\n- Middle region: **both saturated** (V_in − V_TH1 ≤ V_out ≤ V_in + |V_TH2|) → very steep fall.\n- Near the top of the range: M₁ triode, M₂ saturated → V_out approaches 0.\n\nNeglecting channel‑length modulation, the switching threshold V_M (both saturated, currents equal) is:\n\n√(k_n)(V_M − V_TH1) = √(k_p)(V_DD − V_M − |V_TH2|)\n\nV_M = [√(k_n)·V_TH1 + √(k_p)(V_DD − |V_TH2|)] / (√(k_n) + √(k_p)),  k = μC_ox(W/L)\n\nWith matched devices (k_n = k_p, V_TH1 = |V_TH2|), V_M ≈ V_DD/2.\n\n## Small‑Signal Behavior (transition region)\n\nBoth transistors are common‑source stages driven by the same v_in, so their transconductances add and their output resistances parallel:\n\n**A_v = −(g_m1 + g_m2)(r_o1 ∥ r_o2)**\n\n- Input resistance: essentially infinite (gate terminals).\n- Output resistance: r_o1 ∥ r_o2 in the transition (high gain); ≈ R_on of the conducting device at the rails (low, so V_OH/V_OL are unaffected by load current).\n\n## Key Properties\n\n- **Rail‑to‑rail swing:** V_OH = V_DD, V_OL = 0.\n- **Zero static power:** in either logic state one device is off; current flows only during the transition.\n- **Sharp VTC → large noise margins** (NM_H, NM_L each a sizable fraction of V_DD).\n- Dual use: digital inverter, or a high‑gain amplifier if biased at V_M.\n\n**Summary:** The circuit is a CMOS inverter — output high (V_DD) for low input, output low (0 V) for high input, with a steep, high‑gain transition centered near V_DD/2 where both transistors saturate and the gain is −(g_m1+g_m2)(r_o1∥r_o2).",
        "format": "markdown",
        "sha256": "cb5135018f3ea827d9449553f49c4681f260082b3621922b082649a136f14433"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down/PMOS pull-up, with the correct logic-level outputs and inverting small-signal gain. The optional analysis does not undermine the essential answer.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 5275,
        "total_tokens": 5530,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 5275,
        "total_tokens": 5530,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4491,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThe figure shows a **CMOS inverter** (complementary common‑source stage):\n\n- **M₁ (NMOS):** source grounded, gate = input, drain = output → pull‑down device.\n- **M₂ (PMOS):** source at V_DD, gate = input, drain = output → pull‑up device.\n- Gates are tied together (V_in), drains are tied together (V_out). Both transistors operate as common‑source devices driven by the same input.\n\n## Large‑Signal (Logic) Operation\n\n**V_in = 0:** M₁ has V_GS = 0 < V_TH1 → OFF. M₂ has |V_GS| = V_DD > |V_TH2| → ON. Since no current flows, M₂ settles in deep triode with V_DS2 ≈ 0, so **V_out = V_DD** (logic 1).\n\n**V_in = V_DD:** M₂ has V_GS = 0 → OFF. M₁ is ON with zero current, so it sits in deep triode with V_DS1 ≈ 0, giving **V_out = 0** (logic 0).\n\nThus the circuit inverts, with a **full rail‑to‑rail swing** (0 → V_DD) and **zero static power dissipation** (one device is always off in either stable state).\n\n## Transfer Characteristic (VTC)\n\nLet β = μC_ox(W/L). As V_in sweeps from 0 to V_DD:\n\n| Region | Condition | M₁ | M₂ | V_out |\n|---|---|---|---|---|\n| 1 | V_in < V_TH1 | off | triode (I = 0) | V_DD |\n| 2 | V_TH1 < V_in < V_M | saturation | triode | falls slowly |\n| 3 | V_in ≈ V_M | saturation | saturation | sharp fall (high gain) |\n| 4 | V_M < V_in < V_DD − \\|V_TH2\\| | triode | saturation | falls |\n| 5 | V_in > V_DD − \\|V_TH2\\| | triode (I = 0) | off | 0 |\n\n**Switching threshold V_M** (both devices saturated, currents equal):\n\n(β₁/2)(V_M − V_TH1)² = (β₂/2)(V_DD − V_M − |V_TH2|)²\n\nV_M = [V_TH1 + √(β₂/β₁)·(V_DD − |V_TH2|)] / [1 + √(β₂/β₁)]\n\nFor a symmetric design (β₁ = β₂, V_TH1 = |V_TH2|), V_M = V_DD/2, and the VTC is symmetric with large, nearly equal noise margins (NM_H ≈ NM_L ≈ V_DD/2).\n\n## Small‑Signal Behavior (Gain Region)\n\nBiasing the input at V_M puts both transistors in saturation, and since both gates see v_in and both sources are at AC ground, their transconductances add:\n\n**A_v = −(g_m1 + g_m2)(r_o1 ∥ r_o2)**\n\nThis is a high‑gain inverting amplifier region; the steep slope of the VTC here is what produces the sharp digital transition and the good noise immunity.\n\n## Key Properties / Summary\n\n- **Function:** inverting buffer (CMOS inverter); also usable as a high‑gain CS amplifier when biased at V_M.\n- **Static power:** ≈ 0 (no DC path V_DD→GND in stable states); current is drawn only during switching (dynamic + short‑circuit current while V_TH1 < V_in < V_DD − |V_TH2|, when both devices conduct).\n- **Input impedance:** essentially infinite (insulated gates); **output impedance:** low in both logic states (R_on of the conducting device), high only mid‑transition.\n- **Output swing:** full, V OL = 0 and V OH = V_DD, unlike resistive‑ or NMOS‑load inverters.\n- **VTC:** flat at V_DD, very steep near V_M ≈ V_DD/2, flat at 0 → excellent noise margins.\n\nIn short, the circuit is the basic complementary MOS inverter: M₂ pulls the output to V_DD for low input, M₁ pulls it to ground for high input, with a narrow, high‑gain transition zone centered at V_M where both devices are saturated.",
        "format": "markdown",
        "sha256": "72d57b7d95325e255ca3c437a05f4aa8a22acad358d1e80639310d9199a9c2dd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and the NMOS pull-down/PMOS pull-up roles. Its operation and small-signal gain are consistent with the inverter; no contradiction warrants a deduction.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 5206,
        "total_tokens": 5461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 5206,
        "total_tokens": 5461,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4221,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-014-cmos-inverter",
      "part": "part1",
      "question_number": 14,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-014-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nBoth gates are tied to $V_{in}$ and both drains are tied to $V_{out}$:\n\n- **M₁**: NMOS, source at ground → common‑source device\n- **M₂**: PMOS, source at $V_{DD}$ → common‑source (complementary) device\n\nThis is the **CMOS inverter** (complementary push–pull common‑source stage).\n\n## Large‑Signal (DC) Operation – Voltage Transfer Characteristic\n\nLet $k_n = \\mu_n C_{ox}(W/L)_1$, $k_p = \\mu_p C_{ox}(W/L)_2$.\n\n| Region | Condition | State of M₁ / M₂ | Output |\n|---|---|---|---|\n| 1 | $V_{in} < V_{TH1}$ | M₁ off, M₂ deep triode (no current) | $V_{out} = V_{DD}$ |\n| 2 | $V_{TH1} < V_{in} < V_M$ | M₁ sat, M₂ triode | $\\frac{k_n}{2}(V_{in}-V_{TH1})^2 = k_p\\left[(V_{DD}-V_{in}-|V_{TH2}|)(V_{DD}-V_{out}) - \\frac{(V_{DD}-V_{out})^2}{2}\\right]$ |\n| 3 | $V_{in} \\approx V_M$ | **Both saturated** | Steep transition (high gain) |\n| 4 | $V_M < V_{in} < V_{DD}-|V_{TH2}|$ | M₁ triode, M₂ sat | $k_n\\left[(V_{in}-V_{TH1})V_{out}-\\frac{V_{out}^2}{2}\\right] = \\frac{k_p}{2}(V_{DD}-V_{in}-|V_{TH2}|)^2$ |\n| 5 | $V_{in} > V_{DD}-|V_{TH2}|$ | M₂ off, M₁ deep triode | $V_{out} = 0$ |\n\n**Switching threshold** (both saturated, $\\lambda = 0$): equating the saturation currents gives\n\n$$V_M = \\frac{\\sqrt{k_p}\\,(V_{DD}-|V_{TH2}|) + \\sqrt{k_n}\\,V_{TH1}}{\\sqrt{k_n}+\\sqrt{k_p}} \\;\\;\\xrightarrow{\\text{symmetric}}\\;\\; \\frac{V_{DD}}{2}$$\n\n## Small‑Signal Gain in the Transition Region\n\nIn Region 3 both transistors are saturated, and each source is at an AC ground, so both act as common‑source amplifiers in parallel. KCL at the output node:\n\n$$A_v = \\frac{v_{out}}{v_{in}} = -(g_{m1}+g_{m2})\\,(r_{o1}\\parallel r_{o2})$$\n\nThis large gain makes the VTC transition very sharp → **large noise margins** ($NM_L = V_{IL}-V_{OL}$, $NM_H = V_{OH}-V_{IH}$, with $V_{IL}, V_{IH}$ at the unity‑gain points). The same expression shows the circuit can serve as a **high‑gain amplifier** if biased at $V_{in} = V_M$ (though with a very small input swing).\n\n## Key Properties of the Stage\n\n- **Rail‑to‑rail swing:** $V_{OH} = V_{DD}$, $V_{OL} = 0$ (the \"on\" device pulls the output all the way to its supply rail through its triode resistance).\n- **Zero static power:** at either logic level one transistor is fully cut off, so no DC path exists from $V_{DD}$ to ground. Current flows only during switching (short‑circuit current while both devices conduct, plus capacitive charging current).\n- **Infinite DC input resistance** (insulated gates); input loads the previous stage only capacitively.\n- **Output resistance:** low at the extremes ($R_{on}$ of the conducting device), high ($r_{o1}\\parallel r_{o2}$) at the midpoint.\n- **Dynamic behavior:** with a load capacitance $C_L$, M₂ charges $C_L$ to $V_{DD}$ for a low→high input step and M₁ discharges it for a high→low step, giving propagation delays on the order of $0.7\\,R_{on}C_L$.\n\n**Conclusion:** the circuit is a CMOS inverter — it implements $V_{out} = \\overline{V_{in}}$ with full voltage swing, negligible static dissipation, and a high‑gain transition region that also permits its use as a complementary common‑source amplifier.",
        "format": "markdown",
        "sha256": "dd9ce04f3d8838356805c82144faf634076925832f8e901eefecc4f79518a203"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the CMOS inverter and its NMOS pull-down and PMOS pull-up. The supplemental operation, gain, and rail-output analysis is consistent with the circuit; the golden solution grants full credit for this identification.",
          "golden_solution_sha256": "840046eac3d7c03b675f1189f0c155481e30a0dabe801adc9eba216a9a4a04f4",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 6116,
        "total_tokens": 6371,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5058,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 6116,
        "total_tokens": 6371,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5058,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\n- **M₁:** gate = V_in, drain = V_DD, source = V_out → **common‑drain (source follower)**.\n- **M₂:** gate = V_in, source = ground, drain = V_out → **common‑source‑connected device whose drain loads the follower's output**.\n- The output node is the junction of M₁'s source and M₂'s drain; with no external load the two devices carry the **same DC current** (they are in series).\n\nSo the circuit is a source follower driving an active load that is *also* driven by the input. The input reaches the output through two paths: a non‑inverting path (follower, ≈ +1) and an inverting path (M₂'s g_m2 pulling current out of the output node).\n\n## Large‑signal (DC) transfer, saturation assumed, λ = 0\n\nSince I_D1 = I_D2:\n\n- I_D2 = ½ μ_n C_ox (W/L)₂ (V_in − V_TH2)²\n- V_GS1 = V_TH1 + √[(W/L)₂/(W/L)₁]·(V_in − V_TH2)\n- **V_out = V_in − V_GS1 = V_in − V_TH1 − k(V_in − V_TH2)**, with k = √[(W/L)₂/(W/L)₁]\n\nThe transfer characteristic is linear with slope (1 − k), plus a level shift of about one V_GS.\n\n## Small‑signal analysis\n\nKCL at V_out (v_gs1 = v_in − v_out, v_gs2 = v_in):\n\ng_m1(v_in − v_out) − v_out/r_o1 = g_m2 v_in + v_out/r_o2\n\n**Voltage gain:**\n\nA_v = (g_m1 − g_m2) / (g_m1 + g_mb1 + 1/r_o1 + 1/r_o2) = (g_m1 − g_m2)·(r_o1 ∥ r_o2 ∥ 1/(g_m1+g_mb1))\n\nFor r_o → ∞ and no body effect: **A_v = 1 − g_m2/g_m1 = 1 − k**, consistent with the large‑signal slope. (Because the same bias current flows in both devices, g_m2/g_m1 = √[(W/L)₂/(W/L)₁], so the gain is set purely by geometry.)\n\n**Impedances:**\n\n- R_in = ∞ (both gates).\n- R_out = r_o1 ∥ r_o2 ∥ 1/(g_m1 + g_mb1) ≈ 1/g_m1 (low, follower‑like).\n\n## Interpretation and remarks\n\n- **Gain is designable between +1 and negative values:** if (W/L)₂ = (W/L)₁ then A_v = 0 (the follower path exactly cancels the common‑source path); if M₂ is wider, A_v < 0 (an inverting stage with low output resistance); if M₂ is narrower, 0 < A_v < 1.\n- **Output swing:** V_out,max ≈ V_DD − V_GS1(min), V_out,min ≈ 0.\n- **Region check:** M₁ stays saturated (V_DS1 = V_DD − V_out is large). M₂'s saturation requires V_out ≥ V_in − V_TH2, i.e. V_GS1 ≤ V_TH2; with equal threshold voltages this is only marginally satisfied, so in strong conduction M₂ actually enters the triode region and behaves as a V_in‑dependent resistor R_on ≈ 1/[μ_nC_ox(W/L)₂(V_in − V_TH2 − V_out)]. The gain formula then becomes A_v = (g_m1 − β₂V_out)/(g_m1 + g_mb1 + β₂(V_in − V_TH2 − V_out) + 1/r_o1 + 1/r_o2), but the essential behavior — cancellation between the +1 follower path and the inverting path through M₂, and a low output resistance ≈ 1/g_m1 — is unchanged.\n\n**Summary:** the stage is a source follower loaded by an input‑driven common‑source transistor; it provides unity‑ish (or zero, or negative) gain A_v ≈ 1 − g_m2/g_m1 set by the device size ratio, infinite input resistance, and low output resistance ≈ 1/g_m1, with a DC level shift of one V_GS.",
        "format": "markdown",
        "sha256": "78d9270c62e6e622e2597ba2f9ce55ef3c55b3a3a6d905253740b57bf46354a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies both devices as NMOS, recognizes the upper source follower and lower pull-down, and describes a follower-loaded topology rather than a normal complementary CMOS inverter, meeting the golden solution’s full-credit rule. Its added gain analysis is flawed, but that does not negate those required points.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 13712,
        "total_tokens": 13967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12726,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 13712,
        "total_tokens": 13967,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12726,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Topology\n\n- **M₁:** gate = V_in, drain = V_DD, source = V_out → **common‑drain (source follower)**\n- **M₂:** gate = V_in, drain = V_out, source = ground → **common‑source connection**\n- Both gates are tied to the same input, and the output is taken at the node joining M₁'s source and M₂'s drain. The two devices form a single series stack V_DD–M₁–M₂–GND, so I_D1 = I_D2.\n\nSo the circuit is a **source follower (M₁) in parallel with a common‑source stage (M₂)** driven by the same input and sharing the same output node: a non‑inverting path (+g_m1) fighting an inverting path (–g_m2).\n\n## DC / Large‑Signal Behavior (λ = 0, both saturated)\n\nEquating currents: (W/L)₁(V_in – V_out – V_TH1)² = (W/L)₂(V_in – V_TH2)², giving\n\n**V_out = V_in – V_TH1 – √[(W/L)₂/(W/L)₁]·(V_in – V_TH2)**\n\nThe transfer characteristic is *linear*, with slope 1 – √[(W/L)₂/(W/L)₁], consistent with the small‑signal result below.\n\n## Small‑Signal Gain\n\nWith v_gs1 = v_in – v_out (M₁ injects current into the output node) and v_gs2 = v_in (M₂ pulls current out of it), KCL at V_out (including M₁'s body effect):\n\ng_m1(v_in – v_out) – g_mb1·v_out – v_out/r_o1 = g_m2·v_in + v_out/r_o2\n\n$$A_v = \\frac{g_{m1} - g_{m2}}{g_{m1} + g_{mb1} + \\frac{1}{r_{o1}} + \\frac{1}{r_{o2}}} = (g_{m1}-g_{m2})\\left(r_{o1}\\,\\|\\,r_{o2}\\,\\|\\,\\tfrac{1}{g_{m1}+g_{mb1}}\\right)$$\n\nIdealized (r_o → ∞, no body effect): **A_v = 1 – g_m2/g_m1 = 1 – √[(W/L)₂/(W/L)₁]**\n\n## Impedances\n\n- **R_in = ∞** (both gates are inputs)\n- **R_out = r_o1 ‖ r_o2 ‖ 1/(g_m1 + g_mb1)** (with v_in = 0, M₂ looks like r_o2; M₁'s source presents 1/(g_m1+g_mb1) ‖ r_o1). Note A_v = G_m·R_out with G_m = g_m1 – g_m2.\n\n## Interpretation & Remarks\n\n- The gain is the **difference of the follower's non‑inverting gain and the CS stage's inverting gain**. If (W/L)₁ = (W/L)₂, g_m1 = g_m2 and A_v ≈ 0; making M₁ larger gives 0 < A_v < 1 (buffer); making M2 larger gives a net **inverting** gain.\n- M₂ acts as a load whose current is *modulated by the input*, which is why it subtracts from the follower's gain.\n- **Region‑of‑operation caveat:** since V_DS2 = V_out = V_in – V_GS1 < V_in – V_TH2 whenever M₁ is on, M₂ actually sits in the **triode region** (for equal thresholds), behaving as a Vin‑controlled resistor loading the follower. The gain formula keeps the same form, with g_m2 and r_o2 replaced by their triode values (g_m2,tri = μC_ox(W/L)₂·V_DS2, r_ds2); the \"both saturated\" result above is the standard textbook idealization.\n\n**Summary:** this is a source follower loaded by a common‑source (input‑driven) device; its gain is (g_m1 – g_m2)·(r_o1‖r_o2‖1/(g_m1+g_mb1)), i.e. ≈ 1 – g_m2/g_m1, with infinite input resistance and low output resistance ≈ 1/g_m1.",
        "format": "markdown",
        "sha256": "3ff2c37d55ad0a9bf802c2ed8a256ef1776a28406c0982e4ed88f2a15129b2ff"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "The answer models both devices as NMOS, identifies M₁ as a source follower and M₂ as an input-driven pull-down, and describes the circuit as a follower loaded by the lower device rather than a normal CMOS inverter. This meets the golden full-credit rule; the inaccurate gain discussion does not change that structural identification.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 13317,
        "total_tokens": 13572,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 13317,
        "total_tokens": 13572,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12337,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-015-malformed-cmos-inverter",
      "part": "part1",
      "question_number": 15,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-015-malformed-cmos-inverter/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology identification\n\n- **M₁**: gate = V_in, drain = V_DD, source = V_out → **common‑drain (source follower)**.\n- **M₂**: gate = V_in, source = GND, drain = V_out → **common‑source stage**.\n- Both gates are driven by the same input, and both output currents are delivered to the same node V_out (no other load shown).\n\nSo the circuit is a **source follower (M₁) in parallel with a common‑source stage (M₂)**, both driven by V_in. M₁ *pushes* current into the output node, M₂ *pulls* current out of it.\n\n## 2. Large‑signal behavior (both devices saturated, λ = 0, no load)\n\nSince the output node is open, all of M₁'s source current must flow into M₂'s drain: I_D1 = I_D2.\n\n½μₙCₒₓ(W/L)₁(V_in – V_out – V_TH1)² = ½μₙCₒₓ(W/L)₂(V_in – V_TH2)²\n\nSolving:\n\n**V_out = V_in – V_TH1 – √[(W/L)₂/(W/L)₁]·(V_in – V_TH2)**\n\nThe transfer characteristic is therefore **linear** in V_in with slope 1 – √[(W/L)₂/(W/L)₁]. Note the constraint: M₂ stays saturated only while V_out ≥ V_in – V_TH2; if (W/L)₂ is too large (or V_TH's are equal), M₂ falls into the triode region and acts as a voltage‑dependent resistive load on the follower.\n\n## 3. Small‑signal voltage gain\n\nKCL at the output node (v_in applied to both gates):\n\ng_m1(v_in – v_out) – v_out/r_O1 = g_m2·v_in + v_out/r_O2\n\n**A_v = (g_m1 – g_m2) / (g_m1 + 1/r_O1 + 1/r_O2) = (g_m1 – g_m2)·(1/g_m1 ‖ r_O1 ‖ r_O2)**\n\nLimiting cases:\n- r_O1, r_O2 → ∞: **A_v ≈ 1 – g_m2/g_m1** (consistent with the large‑signal slope above).\n- If M₂'s gate were tied to a *constant* bias instead of V_in, g_m2·v_in = 0 and A_v = g_m1/(g_m1 + 1/r_O1 + 1/r_O2) ≈ 1: an ordinary source follower with current‑source load. Tying M₂'s gate to V_in is what subtracts g_m2 from the numerator.\n- g_m2 = g_m1 → A_v = 0; g_m2 > g_m1 → small **inverting** gain.\n\n## 4. Impedances\n\n- **Input resistance:** infinite (both gates are insulated) — the circuit loads the input source negligibly.\n- **Output resistance:** kill v_in → R_out = **1/g_m1 ‖ r_O1 ‖ r_O2**, i.e. low, as expected from a follower‑type output.\n\n## 5. Output swing / region checks\n\n- Upper limit: V_out,max ≈ V_in,max – V_TH1 (M₁ must stay on; M₁ leaves saturation only if V_in > V_DD + V_TH1, usually not an issue).\n- Lower limit: V_out,min = V_in – V_TH2 (edge of M₂'s saturation); below this M₂ enters triode and the gain becomes nonlinear.\n- M₁ suffers **body effect** (its source sits above the substrate), which raises V_TH1 and slightly reduces the gain and linearity.\n\n## 6. Summary / interpretation\n\nThe circuit superimposes two signal paths onto one output node: a unity‑gain buffer path (+g_m1) and an inverting transconductance path (–g_m2). The result is a **low‑output‑impedance buffer/attenuator with gain A_v = (g_m1 – g_m2)/(g_m1 + 1/r_O1 + 1/r_O2)**, adjustable through the (W/L) ratio of the two devices. It is a classic exercise in writing KCL at a node shared by a source follower and a common‑source stage: the follower sets a low output impedance (≈1/g_m1), while M₂'s gate‑connected input feeds forward a cancelling current that scales the gain below (or, if g_m2 > g_m1, reverses) unity.",
        "format": "markdown",
        "sha256": "51ddd583ff4b6c5a69dc2c665e31f1705c54c9f4a19613ecc20b86cc3f33383a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It identifies both devices as NMOS, recognizes M₁ as a source follower and M₂ as a pull-down, and describes the structure as a follower/common-source buffer rather than a normal CMOS inverter, satisfying the golden solution’s explicit full-credit rule.",
          "golden_solution_sha256": "b598ce9b14c47387d9b8d874c626add0f845d3b4bc6f5ad44a431e7ddf11ad3d",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 11994,
        "total_tokens": 12249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 255,
        "output_tokens": 11994,
        "total_tokens": 12249,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10967,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n- **M₁ (NMOS):** gate = input, source = ground, drain = output → **common‑source (CS) transconductance stage**.\n- **M₂ (PMOS):** source = V_DD, and its **gate is wired to its drain** (the output node) → **diode‑connected load**.\n\nA diode‑connected MOSFET is always in saturation (V_DS = V_GS) and behaves as a small‑signal resistor of value ≈ 1/g_m2. So the circuit is a **CS amplifier with a diode‑connected PMOS load**.\n\n## 2. DC (large‑signal) behavior\n\n- The two devices carry the same current: I_D1 = I_D2.\n- **V_in < V_TH1:** M₁ off → no current → M₂ pulls the output up until it shuts off: V_out = V_DD − |V_TH2| (maximum output level).\n- **V_in > V_TH1:** M₁ turns on (saturated), current flows and V_out falls. M₂ stays in saturation always (diode‑connected).\n- M₁ leaves saturation when V_out < V_in − V_TH1 (gain then collapses).\n\n## 3. Small‑signal voltage gain\n\nReplace M₂ by its diode‑connected resistance (1/g_m2 ∥ r_o2; no body effect since its source/body sit at V_DD), and M₁ by g_m1·v_in with r_o1. KCL at the output node:\n\ng_m1·v_in + v_out·(g_m2 + 1/r_o1 + 1/r_o2) = 0\n\n$$A_v = \\frac{v_{out}}{v_{in}} = -g_{m1}\\left(r_{o1} \\parallel r_{o2} \\parallel \\frac{1}{g_{m2}}\\right)$$\n\nNeglecting channel‑length modulation (r_o → ∞):\n\n$$A_v \\approx -\\frac{g_{m1}}{g_{m2}} = -\\sqrt{\\frac{\\mu_n (W/L)_1}{\\mu_p (W/L)_2}}$$\n\n**Key insight:** since both devices carry the same current, g_m1/g_m2 is independent of bias current — the gain is set only by the **device size ratio**, and is therefore relatively **linear** (unlike a resistive load, where gain ∝ g_m1·R_D varies with √I_D).\n\n## 4. Input and output impedances\n\n- **Input:** R_in = ∞ at low frequency (gate of M₁); input capacitance ≈ C_GS1 (+ Miller‑augmented terms at high frequency).\n- **Output:** R_out = r_o1 ∥ r_o2 ∥ (1/g_m2) ≈ **1/g_m2** — a low output resistance, useful for driving subsequent stages but limiting achievable gain.\n\n## 5. Swing and design trade‑offs\n\n- **Output swing:** V_in − V_TH1 ≤ V_out ≤ V_DD − |V_TH2|. The diode‑connected load \"wastes\" one |V_TH2| of headroom.\n- **Gain vs. swing:** raising gain requires a smaller (W/L)₂ (larger |V_GS2|), which further shrinks the swing. Typical gains are only a few V/V.\n- **Summary:** this stage trades gain and headroom for **low output impedance, good linearity, and a gain fixed by geometry** — a classic building block in CMOS analog design (e.g., as a gain stage or buffer driver).\n\n**Bottom line:** CS stage with diode‑connected PMOS load; A_v = −g_m1(r_o1 ∥ r_o2 ∥ 1/g_m2) ≈ −√[μ_n(W/L)₁ / μ_p(W/L)₂], R_out ≈ 1/g_m2, R_in ≈ ∞.",
        "format": "markdown",
        "sha256": "18cdd60287436689d58ac67f4709881276a85ddf47853e623ced7b8680838413"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation included consistently for both devices, as required for full credit.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 594,
        "output_tokens": 6882,
        "total_tokens": 7476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6017,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 594,
        "output_tokens": 6882,
        "total_tokens": 7476,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6017,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\n- **M₁ (NMOS):** source grounded, gate driven by V_in, drain at V_out → operates as a **common‑source (CS) transconductance stage**.\n- **M₂ (PMOS):** source tied to V_DD, gate tied to its own drain → **diode‑connected PMOS acting as the load resistor**.\n\nSo the circuit is a **CS amplifier with a diode‑connected PMOS load** (an inverting voltage amplifier).\n\n## Large‑Signal (DC) Behavior\n\n**Region 1 – M₁ off (V_in < V_TH1):** No current flows, so M₂ drops no overdrive voltage; |V_GS2| = |V_TH2| and\n\nV_out = V_DD − |V_TH2|  (output high level)\n\n**Region 2 – Both saturated (V_in > V_TH1, V_out ≥ V_in − V_TH1):** I_D1 = I_D2. Equating saturation currents:\n\n½ μₙC_ox(W/L)₁(V_in − V_TH1)² = ½ μ_pC_ox(W/L)₂(V_DD − V_out − |V_TH2|)²\n\nV_out = V_DD − |V_TH2| − √[ (μₙ(W/L)₁)/(μ_p(W/L)₂) ] · (V_in − V_TH1)\n\nThe characteristic is linear in this region (constant slope), which is why the stage is fairly linear.\n\n**Region 3 – M₁ in triode (V_out < V_in − V_TH1):** V_out collapses toward 0; M₁ behaves as a small resistor.\n\n## Small‑Signal Analysis\n\nA diode‑connected MOSFET presents a resistance (1/g_m) ∥ r_o. Since M₂'s source and body are both at V_DD, there is no body effect. Hence the load seen at the output is:\n\nR_load = (1/g_m2) ∥ r_o2\n\n**Voltage gain:**\n\nA_v = −g_m1 ( r_o1 ∥ r_o2 ∥ 1/g_m2 ) ≈ − g_m1/g_m2 = − √[ (μₙ (W/L)₁) / (μ_p (W/L)₂) ]\n\nKey insight: because both devices carry the same bias current, the gain **does not depend on the bias current or voltage** — it is set only by the device geometry ratio (and mobility ratio). Typically |A_v| is modest (a few V/V to a few tens).\n\n**Impedances:**\n- R_in = ∞ (gate input)\n- R_out = r_o1 ∥ r_o2 ∥ 1/g_m2 ≈ 1/g_m2 (low output impedance)\n\n## Output Swing and Design Trade‑off\n\n- Maximum: V_out,max = V_DD − |V_TH2| (unloaded); under bias, V_DD − |V_GS2| = V_DD − |V_TH2| − |V_OD2|.\n- Minimum (for saturated M₁): V_out,min = V_in − V_TH1 = V_OD1.\n- Trade‑off: increasing gain requires (W/L)₂ small, but then |V_OD2| = √(2I_D/μ_pC_ox(W/L)₂) grows, eating headroom and shrinking the swing. Conversely, large (W/L)₁ boosts gain but increases input capacitance.\n\n## Summary\n\nThe circuit is an **inverting common‑source amplifier loaded by a diode‑connected PMOS**, with gain A_v ≈ −g_m1/g_m2 = −√[(μₙ(W/L)₁)/(μ_p(W/L)₂)], low output resistance ≈ 1/g_m2, high input resistance, and an output swing limited to roughly [V_OD1, V_DD − |V_GS2|]. It trades gain for linearity, low output impedance, and bias‑independent gain — a classic building block (e.g., in Razavi's treatment of CS stages with diode loads).",
        "format": "markdown",
        "sha256": "fe42bda2bd8cfa5c829380d70ae2836d6f6d956b5f795d0cce765a9da5176565"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with both devices’ output resistances included, along with the accepted approximation −gm1/gm2. The additional large-signal discussion does not undermine the essential answer.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 594,
        "output_tokens": 6241,
        "total_tokens": 6835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 594,
        "output_tokens": 6241,
        "total_tokens": 6835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-016-common-source-diode-connected-load",
      "part": "part1",
      "question_number": 16,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-016-common-source-diode-connected-load/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\n- **M₁ (NMOS):** source grounded, gate = input, drain = output → **common‑source (CS) driver**.\n- **M₂ (PMOS):** source to V_DD, **gate tied to its own drain** → **diode‑connected PMOS acting as the load**.\n\nSo this is a **CS stage with a diode‑connected PMOS load**.\n\n## Small‑signal behavior of the load\n\nA diode‑connected MOSFET (gate–drain shorted) is always in saturation when on. Applying a test voltage v_x at its drain: i_x = g_m2·v_x + v_x/r_O2, so it behaves as a resistance\n\nR_load = (1/g_m2) ∥ r_O2 ≈ 1/g_m2.\n\n## Voltage gain\n\nReplacing M₁ by its transconductor and M₂ by R_load:\n\nA_v = –g_m1 · ( r_O1 ∥ r_O2 ∥ 1/g_m2 ) ≈ –g_m1/g_m2  (if g_m·r_O ≫ 1)\n\nSince both devices carry the same bias current, g_m = √(2μC_ox(W/L)I_D), so\n\n|A_v| = √[ μ_n (W/L)₁ / (μ_p (W/L)₂ ) ]\n\nKey point: the gain is **independent of bias current** and is set only by device geometry and mobilities (typically a modest value, a few V/V).\n\n## Input/output impedance\n\n- R_in = ∞ (gate input).\n- R_out = r_O1 ∥ r_O2 ∥ 1/g_m2 ≈ 1/g_m2 → low output resistance (output pole at high frequency, good for driving capacitive loads).\n\n## Large‑signal transfer characteristic\n\n- **V_in < V_TH1:** M₁ off, I_D = 0 ⇒ M₂ sits at its threshold ⇒ V_out = V_DD – |V_TH2|.\n- **V_in > V_TH1 (both saturated):** equating square‑law currents gives a *straight line*:\n V_out = V_DD – |V_TH2| – √[μ_n(W/L)₁/(μ_p(W/L)₂)]·(V_in – V_TH1)\n i.e., the square‑law nonlinearities cancel → linear amplification with slope = –g_m1/g_m2.\n- **M₁ enters triode** when V_out < V_in – V_TH1; gain then collapses.\n\n## Swing and trade‑offs\n\n- Maximum output: V_out,max = V_DD – |V_TH2| (the diode‑connected load consumes one |V_TH2| of headroom).\n- Minimum useful output: V_out,min = V_in – V_TH1 (edge of M₁ saturation).\n- Compared with a resistive or current‑source load: this stage sacrifices gain and top headroom, but gains **linearity, compactness, self‑biasing of the load, and low output impedance**. Increasing gain requires (W/L)₁ ≫ (W/L)₂, which increases |V_ov2| and further shrinks the output swing.\n\n**Summary:** common‑source amplifier with diode‑connected PMOS load; A_v ≈ –g_m1/g_m2 = –√[μ_n(W/L)₁/(μ_p(W/L)₂)], R_out ≈ 1/g_m2, output swing from V_in – V_TH1 up to V_DD – |V_TH2|, with a linear input–output characteristic in the saturation region.",
        "format": "markdown",
        "sha256": "efea7cb71bc43dc50c0a87507ba55d758b834380de733fce5421c9cdecde1ca5"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source NMOS stage with a diode-connected PMOS load and gives the inverting gain with channel-length modulation treated consistently. The extra large-signal discussion is not needed for full credit.",
          "golden_solution_sha256": "890a218dd592ccc44d29c47d073a2630294c84b195016d665cdb5f09108c1fc5",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 594,
        "output_tokens": 7165,
        "total_tokens": 7759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 594,
        "output_tokens": 7165,
        "total_tokens": 7759,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6387,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the schematic\n\nThe arrow on the *source* lead points **into** the channel for both devices → **both transistors are PMOS**.\n\n- **M₂:** source = V_DD, gate = V_in, drain = V_out → a **common‑source (CS) driving transistor** (source is at an AC ground).\n- **M₁:** gate and drain both tied to ground, source at V_out → a **diode‑connected PMOS acting as the load**. Whenever it conducts, V_SD = V_SG, so M₁ is automatically in saturation.\n\nSo the circuit is a **PMOS common‑source amplifier with a diode‑connected PMOS load** (an inverting gain stage).\n\n## 2. Large‑signal (transfer) characteristic\n\n- **M₂ cut off** (V_in ≥ V_DD − |V_TH2|): no current flows, so M₁ sits at the edge of conduction: **V_out = |V_TH1|** (output low level; it cannot reach 0 V).\n- **Both saturated** (M₁ always sat., M₂ sat. while V_out ≤ V_in + |V_TH2|): equating currents,\n\n  (W/L)₂(V_DD − V_in − |V_TH2|)² = (W/L)₁(V_out − |V_TH1|)²\n\n  **V_out = |V_TH1| + √[(W/L)₂/(W/L)₁]·(V_DD − V_in − |V_TH2|)** → a straight line with slope −√[(W/L)₂/(W/L)₁].\n- **V_in very low:** M₂ enters the triode region and V_out flattens out at a high level V_H < V_DD (set by equating M₂'s triode current to M₁'s saturation current).\n\n## 3. Small‑signal gain\n\nReplacing M₁ by its diode resistance 1/(g_m1 + g_mb1) ∥ r_O1 and M₂ by its CS model:\n\n**A_v = −g_m2 ( r_O2 ∥ r_O1 ∥ 1/(g_m1 + g_mb1) ) ≈ − g_m2 / (g_m1 + g_mb1)**\n\nNeglecting body effect and channel‑length modulation, and since both devices carry the same bias current:\n\n**A_v ≈ − g_m2/g_m1 = − √[(W/L)₂/(W/L)₁]**\n\nKey properties:\n- The gain is **inverting**, set only by the **device size ratio**, and is **independent of bias current and V_DD**.\n- Because 1/g_m1 is small, the gain is modest (unlike a CS stage with a current‑source load).\n- **R_in = ∞** (gate input); **R_out ≈ 1/(g_m1+g_mb1) ∥ r_O2 ∥ r_O1 ≈ 1/g_m1**, i.e. a low output impedance (good for driving capacitive loads, and it makes the gain insensitive to loading).\n\n## 4. Swing and limitations\n\n- Output low limit: V_out,min = |V_TH1| (+ the overdrive needed to sink the bias current) — the output cannot swing to ground.\n- Output high limit for linear operation: V_out ≤ V_in + |V_TH2| (keeps M₂ saturated); beyond that the gain degrades as M₂ goes triode.\n- Input range: 0 ≤ V_in ≤ V_DD − |V_TH2|.\n- In an IC, M₁'s source (V_out) is not at its well potential (V_DD), so **body effect** (g_mb1) further reduces the gain by the factor 1/(1+η).\n\n## 5. Summary\n\nThe circuit is an **inverting common‑source amplifier**: PMOS M₂ amplifies, and diode‑connected PMOS M₁ serves as a nonlinear (≈1/g_m1) load resistor. Its voltage gain is approximately **−√[(W/L)₂/(W/L)₁]** (reduced by body effect and r_O terms), with output swinging between ≈|V_TH1| and ≈V_DD − |V_TH2|, and a low output resistance ≈1/g_m1.",
        "format": "markdown",
        "sha256": "a07334a94bef27b304b075be2a27aecdaac1437b117c0043ad4e22e72a6f8b45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate and drain at ground. It gives the required gm/gm gain, Av ≈ −gm2/gm1; the full-credit rule is satisfied.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1387,
        "output_tokens": 11370,
        "total_tokens": 12757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10436,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1387,
        "output_tokens": 11370,
        "total_tokens": 12757,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10436,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Topology\n\nReading the connections:\n\n- **M₂ (PMOS):** source → V_DD, gate → V_in, drain → V_out. Since the source sits at an AC ground (V_DD), M₂ is a **common‑source (CS) input transistor**.\n- **M₁ (PMOS):** source → V_out, gate → ground, drain → ground. Gate and drain are tied together (both at ground), so M₁ is **diode‑connected** and serves as the **load** for the CS stage.\n\nSo this is a **common‑source amplifier with a diode‑connected load** (an inverting voltage amplifier).\n\n## Large‑Signal Behavior\n\n- M₁ conducts only when V_out > |V_TH1|; once on, V_SD1 = V_SG1, so it is **always in saturation**.\n- M₂ is in saturation while V_out ≤ V_in + |V_TH2|.\n- Transfer characteristic (λ = 0):\n  - V_in ≥ V_DD − |V_TH2|: M₂ cut off → V_out = 0.\n  - Both saturated: equating currents,\n    V_out = |V_TH1| + √[(W/L)₂/(W/L)₁] · (V_DD − V_in − |V_TH2|),\n    a straight line of slope −√[(W/L)₂/(W/L)₁] (the gain region).\n  - V_out > V_in + |V_TH2|: M₂ enters triode, gain collapses, V_out flattens near its high limit.\n- Useful output swing (both saturated): |V_TH1| ≤ V_out ≤ V_in + |V_TH2| (= V_DD − V_OD2). The diode load costs about |V_TH1| of headroom at the bottom.\n\n## Small‑Signal Analysis\n\n**Diode-connected load:** looking into M₁'s source with gate/drain grounded gives\nR_L = 1/(g_m1 + g_mb1 + g_ds1) ≈ 1/g_m1\n(g_mb1 appears because M₁'s source ≠ its well, i.e., body effect).\n\n**Gain:** M₂ is a CS device with no body effect (its well can tie to its source, V_DD):\n\nA_v = −g_m2 · [ r_O2 ∥ 1/(g_m1 + g_mb1 + g_ds1) ] ≈ − g_m2 / (g_m1 + g_mb1)\n\nIf both devices carry the same bias current in the same process (g_m ∝ √(W/L)·I_D):\n\n|A_v| ≈ √[(W/L)₂/(W/L)₁] · 1/(1 + η),  η = g_mb1/g_m1\n\n**Impedances:**\n- R_in = ∞ (gate input)\n- R_out = r_O2 ∥ 1/(g_m1 + g_mb1 + g_ds1) ≈ 1/g_m1 (low output impedance)\n\n## Key Takeaways\n\n- The stage **inverts**, with gain set by a **ratio of device geometries**, hence fairly insensitive to bias current and process variations.\n- Gain is modest (≈ √(W/L ratio)); increasing gain (larger M₂/smaller M₁) shrinks the output swing and raises R_out.\n- M₁'s body effect (g_mb1) slightly reduces the gain; M₂ suffers no body effect.\n- This is the PMOS‑driver counterpart of the classic \"CS stage with diode‑connected load\": simple, robust biasing (M₁ can never leave saturation), at the price of headroom and limited gain.",
        "format": "markdown",
        "sha256": "7787b13e2841d2ca689495b6be49b2c50edde91b04c3fa0db8cdc9fa800487c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies both PMOS devices, M2 as the common-source input, M1 as the diode-connected load, and gives the gm/gm gain with a reasonable body-effect correction. The claimed Vout = 0 cutoff endpoint is a large-signal error, but the golden solution’s full-credit rule is met.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1387,
        "output_tokens": 10607,
        "total_tokens": 11994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1387,
        "output_tokens": 10607,
        "total_tokens": 11994,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9809,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-017-pmos-input-invalid-pulldown",
      "part": "part1",
      "question_number": 17,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-017-pmos-input-invalid-pulldown/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\n- **M₂ (PMOS):** source tied to V_DD, gate driven by V_in, drain at the output → a **common‑source (CS) input transistor** (inverting gain stage).\n- **M₁ (PMOS):** gate and drain both tied to ground, source at the output → a **diode‑connected load** (its gate–drain short forces it into saturation whenever it conducts, i.e., whenever V_out > |V_TH1|).\n\nSo the circuit is a **common‑source stage with a diode‑connected load**, implemented entirely with PMOS devices. Both transistors carry the same bias current (I_D1 = I_D2).\n\n## Large‑Signal (DC) Behavior\n\n- If V_in > V_DD – |V_TH2|: M₂ is off, no current flows, and M₁ sits at the edge of conduction → **V_out = |V_TH1|** (the output cannot swing to ground; one threshold voltage of headroom is lost).\n- As V_in falls, M₂ turns on (saturated while V_out ≤ V_in + |V_TH2|) and pushes current into the node; V_out rises until M₁'s current (∝ (V_out – |V_TH1|)²) matches it. Neglecting channel‑length modulation:\n\n$$V_{out} = |V_{TH1}| + \\sqrt{\\frac{(W/L)_2}{(W/L)_1}}\\,(V_{DD}-V_{in}-|V_{TH2}|)$$\n\n- For very low V_in, M₂ enters the triode region and V_out → V_DD.\n\n## Small‑Signal Gain\n\nA diode‑connected MOSFET looks like a resistance 1/(g_m1 + g_mb1) (parallel r_o1). Since M₁'s source (at V_out) differs from its body (at V_DD), the body effect appears; M₂ has no body effect (source = body = V_DD). Loading the CS transistor M₂ (transconductance g_m2, output resistance r_o2):\n\n$$A_v = -\\,g_{m2}\\left(r_{o2} \\parallel r_{o1} \\parallel \\frac{1}{g_{m1}+g_{mb1}}\\right) \\;\\approx\\; -\\,\\frac{g_{m2}}{g_{m1}+g_{mb1}}$$\n\nWith equal bias currents and square‑law devices (g_m = √(2μC_ox (W/L) I_D)), and η = g_mb1/g_m1:\n\n$$|A_v| \\approx \\frac{1}{1+\\eta}\\sqrt{\\frac{(W/L)_2}{(W/L)_1}}$$\n\n(i.e., ≈ √((W/L)₂/(W/L)₁) if body effect and r_o are ignored). The gain is well defined and relatively linear, but modest — the price of the diode load.\n\n## Input/Output Resistance and Swing\n\n- **R_in = ∞** (gate input).\n- **R_out ≈ 1/(g_m1 + g_mb1) ∥ r_o1 ∥ r_o2 ≈ 1/(g_m1+g_mb1)** — low, so the stage drives capacitive loads well.\n- **Output swing:** from |V_TH1| (M₂ cut off) up to ≈ V_DD (M₂ in triode); the gain region ends at V_out = V_in + |V_TH2|. The diode‑connected PMOS load costs |V_TH1| of low‑side headroom.\n\n**Summary:** an inverting common‑source amplifier with a diode‑connected PMOS load; voltage gain ≈ –g_m2/(g_m1+g_mb1) ≈ –√((W/L)₂/(W/L)₁)/(1+η), with low output impedance and output low level limited to |V_TH1|.",
        "format": "markdown",
        "sha256": "685c975bf390b2793594cda9eea9f6a6dd1e0361ce5be7bba4058237f46e57c0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both PMOS devices, M2 as the common-source input device, and M1 as a diode-connected PMOS load with gate/drain grounded. It gives the required gm/gm gain, including the body-effect refinement; the extra operating-point discussion does not alter the essential analysis.",
          "golden_solution_sha256": "b9bd40d93897263d8f8ec48e8a570180ddbbc0962f905b31861c1d4b96315bc9",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1387,
        "output_tokens": 9980,
        "total_tokens": 11367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1387,
        "output_tokens": 9980,
        "total_tokens": 11367,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9122,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Small‑Signal Analysis\n\n**Resistance at node X:** M₂ has its source and gate at AC ground (V_DD and V_b2), so looking into its drain (node X) we simply see:\n\n$$R_X = r_{o2}$$\n\n**Looking into M₁'s drain:** M₁ is therefore a transistor whose source is degenerated by R_X = r_o2. Using the standard formula for the resistance seen at the drain of a degenerated transistor (test source v_x, i_x at the output, with v_X = i_x r_o2):\n\n$$R_{out} = \\left[1 + (g_{m1} + g_{mb1})\\,r_{o1}\\right] r_{o2} + r_{o1}$$\n\n## Result\n\nNeglecting body effect:\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + g_{m1} r_{o1} r_{o2} \\;\\approx\\; g_{m1} r_{o1} r_{o2}}$$\n\n**Interpretation:** This is a PMOS cascode stack. The cascode device M₁ multiplies the resistance ro2 sitting at node X by roughly (1 + gm1ro1), so the output resistance is boosted by a factor of about gm1ro1 compared to a single transistor — exactly the property that makes cascodes useful as high‑impedance current sources.",
        "format": "markdown",
        "sha256": "d5ca2a3bf93d92b34d527987ff2ca4fe3700fd00cc213f7c7b9d21e4e8599fe7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the PMOS cascode device and gives the full output-resistance expression and its approximation.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2151,
        "output_tokens": 4783,
        "total_tokens": 6934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2151,
        "output_tokens": 4783,
        "total_tokens": 6934,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4464,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Small‑Signal Picture\n\nWith $V_{DD}$, $V_{b1}$, $V_{b2}$ all at AC ground:\n\n**Looking up into node X (drain of M₂):** Since M₂ has its gate and source at AC ground, the resistance seen looking into its drain is simply\n\n$$R_X = r_{o2}$$\n\n**Looking into the output (drain of M₁):** M₁ is a cascode (common‑gate) device whose source node X is degenerated by $R_X = r_{o2}$. Using the formula for the resistance seen at a degenerated drain:\n\n$$R_{out} = r_{o1} + \\left[1 + (g_{m1} + g_{mb1})\\,r_{o1}\\right] R_X$$\n\n## Result\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1})\\, r_{o1} r_{o2} \\;\\approx\\; (g_{m1}+g_{mb1})\\, r_{o1} r_{o2}}$$\n\nNeglecting body effect ($g_{mb1} \\approx 0$):\n\n$$R_{out} \\approx g_{m1}\\, r_{o1}\\, r_{o2}$$\n\n**Interpretation:** This is the classic cascode current source — stacking M₂ on top of M₁ boosts the output resistance by a factor of roughly $g_{m1}r_{o1}$ compared to a single transistor ($r_{o1}$ alone).",
        "format": "markdown",
        "sha256": "4dcebfc6c13c5df8233377a52e6209282c93bb9a0ecf32f95b9c322cdf6a04a3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the cascode device and gives the full output-resistance expression, including body effect. The answer need not explicitly name the devices as PMOS under the full-credit rule.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2151,
        "output_tokens": 5403,
        "total_tokens": 7554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2151,
        "output_tokens": 5403,
        "total_tokens": 7554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5042,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-018-find-rout",
      "part": "part1",
      "question_number": 18,
      "question": "Find Rout in the figure.",
      "figures": [
        "tasks/part1-018-find-rout/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Small‑Signal Picture\n\n- $V_{DD}$, $V_{b1}$, $V_{b2}$ are all AC grounds.\n- **M₂** has its gate and source at AC ground, so looking *up* into its drain (node X) we see just a resistor:\n\n$$R_X = r_{o2}$$\n\n- **M₁** is therefore a common‑gate (source‑degenerated) device: we look into its drain while its source sits on the resistance $R_X = r_{o2}$.\n\n## Applying the Degenerated Drain Formula\n\nFor a transistor looking into the drain with a source resistance $R_S$:\n\n$$R_{out} = r_{o1}\\big[1 + (g_{m1} + g_{mb1}) R_S\\big] + R_S$$\n\nSubstituting $R_S = r_{o2}$:\n\n$$\\boxed{R_{out} = r_{o1} + r_{o2} + (g_{m1} + g_{mb1})\\, r_{o1} r_{o2} \\;\\approx\\; g_{m1} r_{o1} r_{o2}}$$\n\n(neglecting body effect, $g_{mb1}=0$).\n\n## Interpretation\n\nThis is the familiar **cascode** result: the bottom transistor M₁ sees the top transistor M₂ as a degeneration resistance $r_{o2}$, which boosts the output resistance by roughly the intrinsic gain $g_{m1}r_{o1}$ compared to a single transistor ($r_{o1}$ alone).",
        "format": "markdown",
        "sha256": "9be7ec13e8e87dcc1ee2aec0856cd7e09a01c6d88c6945f7ae07ed049a2dba38"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Identifies M1 as the common-gate cascode and gives the correct full output-resistance expression and approximation. Its small-signal treatment is consistent with the PMOS circuit; no explicit device-type statement is required.",
          "golden_solution_sha256": "0e58951a444fd5eb5a81c93c3c94eef4ae9b6f921b6512a0c0fecf7f946efcb1",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2151,
        "output_tokens": 4444,
        "total_tokens": 6595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4090,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2151,
        "output_tokens": 4444,
        "total_tokens": 6595,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4090,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Saturation condition for M2\n\nM2 is a PMOS with its source at $V_{DD}$, gate at $V_{b2}$, and drain at node X. It stays in saturation as long as\n\n$$V_{SD2} \\ge V_{SG2} - |V_{TH2}| \\;\\;\\Rightarrow\\;\\; V_{DD} - V_X \\ge (V_{DD} - V_{b2}) - |V_{TH2}| \\;\\;\\Rightarrow\\;\\; V_X \\le V_{b2} + |V_{TH2}|$$\n\ni.e., **node X must be held at least one overdrive voltage ($V_{ov2}$) below $V_{DD}$.**\n\n## What fixes $V_X$\n\nNode X is the *source* of M1, whose gate is tied to the fixed bias $V_{b1}$. As long as M1 is saturated, it acts like a source follower with a fixed gate, pinning X at\n\n$$V_X = V_{b1} + V_{SG1} = V_{b1} + |V_{TH1}| + V_{ov1}$$\n\n(where $V_{ov1}$ is set by the bias current). Because of this cascode \"shielding,\" $V_X$ — and hence M2's saturation — is essentially independent of the output voltage; it is set purely by the bias network.\n\n## The design rule\n\nSubstituting $V_X$ into the saturation condition gives the constraint on the two bias voltages:\n\n$$V_{b1} + |V_{TH1}| + V_{ov1} \\le V_{b2} + |V_{TH2}| \\quad\\overset{|V_{TH1}|=|V_{TH2}|}{\\Longrightarrow}\\quad V_{b2} \\ge V_{b1} + V_{ov1}$$\n\nEquivalently: choose $V_{b2} = V_{DD} - |V_{TH2}| - V_{ov2}$ and make sure the overdrive you give M2 satisfies $V_{ov2} \\le V_{DD} - V_X$. (A maximum‑swing design sets $V_X = V_{DD} - V_{ov2}$ exactly, placing M2 right at the edge of saturation.) Note the intuition: if $V_{b2}$ is pulled too low, $V_{SG2}$ (and $V_{ov2}$) becomes large, and M2 needs more $V_{SD}$ than the pinned value $V_{DD}-V_X$ allows — it falls into the triode region.\n\n## Don't forget M1\n\nThis guarantee only holds while M1 itself is saturated, which requires\n\n$$V_{out} \\le V_{b1} + |V_{TH1}|$$\n\nIf $V_{out}$ rises above this, M1 enters triode, node X is pulled up toward $V_{out}$, and M2 is dragged into triode as well.\n\n**Summary:** M2's saturation is ensured by bias design, not by the signal: pick $V_{b1}$ and $V_{b2}$ so that $V_X = V_{b1}+|V_{TH1}|+V_{ov1} \\le V_{b2}+|V_{TH2}|$ (matched thresholds: $V_{b2} \\ge V_{b1}+V_{ov1}$), and keep $V_{out} \\le V_{b1}+|V_{TH1}|$ so that node X remains pinned. In a cascode current mirror, $V_{b2}$ is normally generated by a replica bias branch that enforces this relationship automatically.",
        "format": "markdown",
        "sha256": "270f36a925254e06151752da8c5ca43e1b8e3b1d0ef5e25b9b5316089ca4cd18"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, relates VX to Vb1 through M1, and derives the equivalent bias constraint Vb2 ≥ Vb1 + Vov1 for matched thresholds.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2119,
        "output_tokens": 10666,
        "total_tokens": 12785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2119,
        "output_tokens": 10666,
        "total_tokens": 12785,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the condition\n\nBoth devices are PMOS. For M2: source = V_DD, gate = V_b2, drain = node X. A PMOS transistor stays in saturation as long as\n\nV_SD2 ≥ V_SG2 − |V_TH2|  ⟹  V_DD − V_X ≥ (V_DD − V_b2) − |V_TH2|\n\nwhich simplifies to the key requirement:\n\n**V_X ≤ V_b2 + |V_TH2|**  (i.e., node X must stay at least one overdrive voltage, |V_OV2|, below V_DD).\n\n## What fixes V_X?\n\nAs long as M1 is saturated, its gate–source voltage is pinned by the branch current: V_SG1 = |V_TH1| + |V_OV1|. Since M1's gate is at V_b1 and its source is X:\n\nV_X = V_b1 + |V_TH1| + |V_OV1|\n\n(notice V_X is essentially independent of V_out — it is set by M1's bias).\n\n## The design rule\n\nSubstituting, M2 is guaranteed to be in saturation if:\n\nV_b1 + |V_TH1| + |V_OV1| ≤ V_b2 + |V_TH2|  ⟹  **V_b2 ≥ V_b1 + |V_OV1| + (|V_TH1| − |V_TH2|)**\n\nwhich for matched thresholds is simply V_b2 ≥ V_b1 + |V_OV1|. At the same time M2 must still be turned on hard enough to carry the current:\n\nV_b2 ≤ V_DD − |V_TH2| − |V_OV2|\n\nSo V_b2 must be placed in the window between these two limits; equivalently, the available headroom must satisfy V_DD − V_b1 − |V_TH1| ≥ |V_OV1| + |V_OV2|.\n\n## Intuition and practical implementation\n\n- If V_b2 is chosen **too low** (too far below V_DD), M2 is overdriven: it pushes node X up toward V_DD until V_SD2 < V_OV2 and M2 falls into the triode region. Raising V_b2 reduces V_SG2 and keeps V_X safely below V_b2 + |V_TH2|.\n- In a real cascode current mirror, this is done automatically: V_b2 is generated by a **replica bias branch** (a diode-connected stack duplicating the V_SG drops of M1 and M2), so the inequality V_X ≤ V_b2 + |V_TH2| holds over process, voltage, and temperature without hand-tuning.\n\n(Separately, M1's saturation is ensured by the output swing: V_out ≤ V_b1 + |V_TH1|.)",
        "format": "markdown",
        "sha256": "384508080bc6447e315b48810b6d94414e9945435401746a0e06f7ad0b5e2510"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies both devices as PMOS, gives M2’s saturation condition, and uses V_X = V_b1 + |V_GS1| to derive the equivalent bias constraint V_b2 − V_b1 ≥ |V_OV1| for matched thresholds. The extra implementation discussion does not change the essential result.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2119,
        "output_tokens": 11195,
        "total_tokens": 13314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2119,
        "output_tokens": 11195,
        "total_tokens": 13314,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10577,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-019-ensure-m2-saturation",
      "part": "part1",
      "question_number": 19,
      "question": "How do we ensure that M2 is in saturation in the figure?",
      "figures": [
        "tasks/part1-019-ensure-m2-saturation/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the condition\n\nBoth devices are PMOS, with M2's source at $V_{DD}$ and its drain at node X. A PMOS is saturated when $V_{SD} \\geq V_{SG} - |V_{TH}|$, so for M2:\n\n$$V_{DD} - V_X \\geq (V_{DD} - V_{b2}) - |V_{TH2}| \\quad\\Longrightarrow\\quad \\boxed{V_X \\leq V_{b2} + |V_{TH2}|}$$\n\ni.e., the drain of M2 (node X) must not rise above its gate voltage plus one threshold.\n\n## Where does $V_X$ come from?\n\nNode X is *not* free‑floating: it is the source of M1, whose gate is fixed at $V_{b1}$. As long as M1 is on (and in saturation), it clamps node X to\n\n$$V_X = V_{b1} - V_{SG1} = V_{b1} - (|V_{TH1}| + |V_{OD1}|)$$\n\n## The design constraint\n\nSubstituting into the saturation condition:\n\n$$V_{b1} - V_{SG1} \\leq V_{b2} + |V_{TH2}| \\qquad\\text{or}\\qquad V_{b2} \\geq V_{b1} - V_{SG1} - |V_{TH2}|$$\n\nEquivalently, $V_{b1} - V_{b2} \\leq |V_{TH1}| + |V_{TH2}| + |V_{OD1}|$.\n\n**Practical biasing procedure:**\n- Choose $V_{b2} = V_{DD} - |V_{TH2}| - |V_{OD2}|$ to set the desired current and overdrive on M2. This fixes the maximum allowable $V_X = V_{DD} - |V_{OD2}| = V_{b2} + |V_{TH2}|$.\n- Then choose $V_{b1} = V_X + V_{SG1}$, placing $V_X$ at (or slightly below, for margin) that limit.\n\n## Key insight\n\nBecause node X is clamped by M1's gate–source voltage, $V_X$ stays essentially constant even when $V_{out}$ swings (the cascode shields X by a factor $\\approx g_{m1}r_{o1}$). Therefore M2's saturation is guaranteed **by the choice of bias voltages $V_{b1}$ and $V_{b2}$**, not by the output voltage — the output swing only limits M1 ($V_{out} \\leq V_X - |V_{OD1}|$). So ensuring $V_{b1} - V_{SG1} \\le V_{b2} + |V_{TH2}|$ (with some margin) keeps M2 in saturation over the entire usable output range.",
        "format": "markdown",
        "sha256": "35af4fc5abeb1ee9027702cdd6c3a984a65f22f0527e324e3af5fdfe5f1d9b5f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies both devices as PMOS and gives M2’s saturation condition, and it recognizes that M1’s bias sets node X. But it reverses the PMOS relation: the correct relation is V_X = V_{b1} + V_{SG1}, not V_{b1} - V_{SG1}. Thus its derived bias constraint and practical procedure are wrong.",
          "golden_solution_sha256": "519fe1851b4fd9a0e83d2b184c82583260701cb7382ec5e7c6bdd728b4cc9a0f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2119,
        "output_tokens": 8467,
        "total_tokens": 10586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7819,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2119,
        "output_tokens": 8467,
        "total_tokens": 10586,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7819,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Identification\n\nThis is a **telescopic (NMOS) cascode stage**:\n\n- **M₁** – common‑source (input) transistor, gate = v_in, source grounded.\n- **M₂** – common‑gate (cascode) transistor, gate at fixed bias V_b1; node **X** (source of M₂ / drain of M₁) is the internal low‑impedance node.\n- **I₁** – an *ideal* current‑source load from V_DD (infinite small‑signal resistance), with the output taken at the drain of M₂.\n\nBoth devices carry the same DC current: I_D1 = I_D2 = I₁.\n\n## Biasing and Output Swing\n\n- V_X = V_b1 − V_GS2. For M₁ to stay in saturation: V_X ≥ V_OD1 ⇒ **V_b1 ≥ V_GS2 + V_OD1 = V_TH2 + V_OD2 + V_OD1**.\n- For M₂ to stay in saturation: V_out ≥ V_X + V_OD2 = V_b1 − V_TH2.\n- With the optimum choice V_b1 = V_GS2 + V_OD1: **V_out,min = V_OD1 + V_OD2**, V_out,max = V_DD (ideal source). So the cascode \"costs\" one overdrive voltage of headroom compared with a simple CS stage.\n\n## Small‑Signal Voltage Gain\n\nLooking into the drain of M₂, with ro₁ (the output resistance of M₁) as source degeneration:\n\n**R_out = ro₂ + ro₁ + (gm₂ + gmb₂)·ro₁·ro₂ ≈ (gm₂ + gmb₂)·ro₁·ro₂**\n\nSince the ideal current source contributes no parallel conductance, this is the total resistance at V_out. The stage transconductance is ≈ gm₁ (node X is a low‑impedance node, ≈1/(gm₂+gmb₂) ≪ ro₁, so nearly all of gm₁·v_in reaches the output). Hence:\n\n**A_v = −gm₁·ro₁·[1 + (gm₂ + gmb₂)·ro₂] ≈ −(gm₁·ro₁)(gm₂·ro₂)**\n\ni.e., the gain is approximately the **product of the intrinsic gains of the two devices** — the maximum gain achievable with these transistors. Compared with a simple CS stage with the same ideal load (gain = gm₁ro₁), the cascode multiplies the gain by ≈ gm₂ro₂.\n\n## Input/Output Impedances and the Role of Node X\n\n- **R_in = ∞** (gate input).\n- **R_out ≈ (gm₂+gmb₂)ro₁ro₂** (very large, ~gm·ro²).\n- Node X has low impedance ≈ 1/(gm₂+gmb₂) ∥ ro₁. Output voltage variations are attenuated by ≈ 1/(gm₂ro₂) at X, so M₁'s drain sees an almost constant voltage (\"shielding\"): M₁ behaves as a near‑ideal transconductor, and C_GD1 sees only a gain of ≈ −gm₁/gm₂ ≈ −1, so the Miller capacitance at the input is ≈ 2C_GD1 instead of (1+|A_v|)C_GD1.\n\n## Frequency Response\n\n- Pole at X: ω_X ≈ gm₂/C_X (C_X = C_gs2 + C_db1 + C_sb2) — very high frequency.\n- Dominant pole at the output: ω_p = 1/(R_out·C_L) — very low, because R_out is huge.\n- Gain–bandwidth product: GBW = |A_v|·ω_p = gm₁/C_L, the same as a simple CS stage: the cascode buys gain, not speed.\n\n## Practical Remarks\n\n1. An ideal I₁ doesn't exist; with a real PMOS mirror load of resistance r_op, the gain becomes ≈ gm₁(R_out,cas ∥ r_op) ≈ gm₁r_op unless the *load* is also cascoded.\n2. Because the gain is enormous and the load is an ideal current source, the input DC level must be exactly V_TH1 + V_OD1 (set by I₁); a tiny offset drives the output to a rail. Real designs rely on feedback or a finite‑resistance load to define the operating point.\n3. If M₂'s body is grounded, gmb₂ adds to gm₂ in R_out (slightly increasing gain) but raises V_TH2, reducing swing.\n\n**Summary:** the circuit is a cascode amplifier with ideal current‑source load, providing very high gain A_v ≈ −(gm₁ro₁)(gm₂ro₂), very high output resistance, infinite input resistance, reduced Miller effect, at the price of one extra overdrive voltage of output headroom and a low dominant output pole.",
        "format": "markdown",
        "sha256": "8f3dcb8eee9f179445fc273a7af2d0bafab08490708a4d23d3b2e03bde443105"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It meets the explicit full-credit rule: it identifies M1 and M2 as the common-source and common-gate NMOS devices and gives the equivalent ideal-load gain expression. Its claim that node X is low impedance with an ideal current-source load is inaccurate, but does not change the rule-based score.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 9405,
        "total_tokens": 10483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8335,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1078,
        "output_tokens": 9405,
        "total_tokens": 10483,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8335,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology identification\n\n- **M₁**: gate = v_in, source = ground, drain = node X → **common‑source (CS) input transistor**.\n- **M₂**: gate = fixed bias V_b1, source = node X, drain = output → **common‑gate (cascode) transistor**.\n- **I₁**: ideal current source from V_DD to the output → **active load**.\n- Output taken at the drain of M₂.\n\nThis is the classic **cascode (telescopic) amplifier with an ideal current‑source load**. Since M₁ and M₂ are in series, both carry the bias current I₁.\n\n## 2. Biasing / swing conditions\n\n- I_D1 = I_D2 = I₁.\n- Node X sits at V_X = V_b1 − V_GS2. V_b1 must be chosen so that:\n  - M₁ stays in saturation: V_X ≥ V_in − V_TH1 (i.e. V_b1 ≥ V_TH2 + V_OD2 + V_OD1),\n  - M₂ stays in saturation: V_out ≥ V_X + V_OD2 = V_b1 − V_TH2.\n- With the optimal choice V_b1 = V_TH2 + V_OD1 + V_OD2, the output can swing from **V_out,min = V_OD1 + V_OD2** up to V_DD (ideal load): the cascode costs only one overdrive voltage of headroom.\n\n## 3. Small‑signal analysis\n\n**Output resistance** (v_in = 0, look into M₂'s drain; M₁ then appears as ro1 degenerating M₂'s source):\n\nR_out = ro2 + [1 + (gm2 + gmb2)ro2]·ro1 ≈ (gm2 ro2)·ro1\n\n(the ideal current source adds nothing in parallel). This is the cascode's impedance‑boosting property: ro1 is multiplied by ≈ gm2ro2.\n\n**Voltage gain.** Because I₁ is ideal (infinite impedance), the small‑signal current in the branch must be zero: i_D1 = i_D2 = 0. Hence all of M₁'s generated current gm1·v_in flows through ro1:\n\nv_X = −gm1 ro1 v_in\n\nM₂ (common‑gate, zero ac drain current) then amplifies v_X to the output:\n\nv_out = v_X·[1 + (gm2 + gmb2)ro2]\n\nTherefore:\n\n**A_v = −gm1 ro1 [1 + (gm2 + gmb2)ro2] ≈ −gm1 gm2 ro1 ro2 = −(gm ro)₁·(gm ro)₂**\n\nEquivalently, A_v = −G_m·R_out with G_m = gm1·ro1[1+(gm2+gmb2)ro2]/R_out ≈ gm1.\n\n**Input resistance:** R_in = ∞ (MOS gate).\n\n## 4. Interpretation\n\n- A simple CS stage with the same ideal load gives only A_v = −gm1 ro1. The cascode multiplies this by ≈ (1 + gm2 ro2), i.e. the gain becomes the **product of the intrinsic gains of the two devices** (hundreds to thousands for modern/long devices).\n- Mechanically: M₂ shields node X from output variations (boosting the resistance seen at M₁'s drain) and adds its common‑gate gain; with a *finite* load resistance the swing at X would be small (≈ gm1/gm2·v_in), which also suppresses the Miller multiplication of C_GD1 — with the ideal load here, v_X = −gm1ro1·v_in and the full boost appears as CG gain of M₂.\n- Frequency response: the dominant pole is at the very high‑impedance output node (R_out·C_L); a second pole sits at node X.\n\n## 5. Summary\n\n| Quantity | Value |\n|---|---|\n| Topology | CS stage (M₁) + cascode device (M₂), ideal current‑source load |\n| R_in | ∞ |\n| R_out | ro1 + ro2 + (gm2+gmb2)ro1ro2 ≈ gm2ro2·ro1 |\n| A_v | −gm1ro1[1+(gm2+gmb2)ro2] ≈ −gm1gm2ro1ro2 |\n| Output swing | V_OD1 + V_OD2 ≤ V_out ≤ V_DD (with V_b1 = V_TH2+V_OD1+V_OD2) |\n\n**Bottom line:** the circuit is a cascode amplifier whose ideal current‑source load allows it to achieve the maximum possible gain, ≈ (gm·ro)₁(gm·ro)₂, at the cost of one extra overdrive voltage of output headroom.",
        "format": "markdown",
        "sha256": "6f448f5622a374092bc768033af507fd505d1ffdae85d08881deccb89d4d7d98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-source input device and common-gate cascode, and gives the equivalent ideal-load gain expression required for full credit. The main gain reasoning and output-resistance result are sound; the finite-load swing comment is only a minor imprecision.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1078,
        "output_tokens": 10840,
        "total_tokens": 11918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1078,
        "output_tokens": 10840,
        "total_tokens": 11918,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9775,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-020-nmos-cascode-gain-stage",
      "part": "part1",
      "question_number": 20,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-020-nmos-cascode-gain-stage/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology identification\n\n- **M₁** (gate = v_in, source = ground): common‑source (CS) input device.\n- **M₂** (gate = fixed bias V_b1, source = node X): common‑gate \"cascode\" device stacked on M₁.\n- **I₁**: ideal current‑source load tied to V_DD; output taken at the drain of M₂.\n\nThis is the classic **telescopic (cascode) single‑stage amplifier**. At DC, the same current flows through the whole stack: I_D1 = I_D2 = I₁.\n\n## 2. Biasing and saturation constraints\n\n- Node X sits at V_X = V_b1 − V_GS2.\n- **M₁ in saturation:** V_X ≥ V_in − V_TH1 ⇒ V_b1 ≥ V_OV1 + V_OV2 + V_TH2.\n- **M₂ in saturation:** V_out ≥ V_b1 − V_TH2.\n- With V_b1 chosen at its minimum (V_OV1 + V_OV2 + V_TH2), the output can swing down to **V_out,min = V_OV1 + V_OV2** (one overdrive voltage more than a simple CS stage), and up to V_DD (ideal load). So the cascode \"costs\" one overdrive of headroom.\n\n## 3. Output resistance\n\nLooking into the drain of M₂ (with ro₁ at its source), a test source gives:\n\n**R_out = ro₁ + ro₂ + (gm₂ + gmb₂)ro₁ro₂ ≈ (gm₂ + gmb₂)ro₁ro₂**\n\nSince I₁ is ideal (infinite resistance), this is the total resistance at the output node — the resistance seen at M₁'s drain (ro₁) is boosted by roughly the intrinsic gain of M₂.\n\n## 4. Voltage gain\n\nBecause the ideal current source blocks AC, the small‑signal branch current is zero:\n\n- KCL at M₁: gm₁v_in + v_X/ro₁ = 0 ⇒ v_X = −gm₁ro₁·v_in\n- KCL at M₂: v_out = v_X[1 + (gm₂ + gmb₂)ro₂]\n\nTherefore:\n\n**A_v = −gm₁ro₁[1 + (gm₂ + gmb₂)ro₂] ≈ −(gm₁ro₁)(gm₂ro₂) = −G_m·R_out**, with G_m ≈ gm₁.\n\nKey point: the gain is approximately the **product of the intrinsic gains** of the two transistors — a factor ≈ gm₂ro₂ larger than a simple CS stage (−gm₁ro₁). With gm·ro ≈ 20–50 per device, gains of several hundred to several thousand are possible.\n\n## 5. Role of node X (shielding / frequency behavior)\n\n- Output variations reach node X attenuated: v_X/v_out = 1/[1 + (gm₂+gmb₂)ro₂] ≈ 1/(gm₂ro₂). M₂ \"shields\" M₁'s drain from the output, so M₁'s drain current is almost independent of v_out → very high gain.\n- If the output is loaded (or AC‑shorted), the gain at X is only ≈ −gm₁/(gm₂+gmb₂) ≈ −1·(gm₁/gm₂): X swings very little. Hence C_GD1 sees little Miller multiplication, the pole at X is pushed to high frequency (node resistance ≈ 1/gm₂), and the dominant pole sits at the high‑resistance output node (1/R_out·C_L). The cascode also provides good reverse isolation.\n\n## 6. Practical trade‑offs\n\n- **Headroom:** minimum output voltage V_OV1 + V_OV2 (plus the load's overdrive if I₁ is a real PMOS source); V_b1 must be traded between keeping M₁ saturated and maximizing swing.\n- **Real load:** if I₁ is implemented with a PMOS of resistance roP, the gain becomes ≈ −gm₁(R_out‖roP) → the cascode benefit saturates once R_out ≫ roP (gain ≈ gm₁roP).\n- **Body effect:** M₂'s source is not at bulk potential, so gmb₂ adds to gm₂ in R_out (slightly helping gain) but raises V_TH2 (bias design).\n\n**Summary:** The circuit is a cascode (CS + CG) amplifier loaded by an ideal current source. It delivers A_v ≈ −gm₁ro₁(gm₂+gmb₂)ro₂ ≈ −(gm₁ro₁)(gm₂ro₂), with R_out ≈ (gm₂+gmb₂)ro₁ro₂, at the price of one extra overdrive voltage of output swing — the standard high‑gain building block of telescopic OTAs and cascode current mirrors.",
        "format": "markdown",
        "sha256": "f3307e3294a91dad42e234b326b2ccd7fbf88ae31da435b51aaf5299eedefe35"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-source NMOS and M2 as the common-gate NMOS cascode, and derives the equivalent ideal-load gain expression required for full credit. Secondary discussion does not undermine the central analysis.",
          "golden_solution_sha256": "fa3ce3c10c3d0bf6258738fc6e9b064c896064cb851cd7f79a50e2fe2b3c822b",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1078,
        "output_tokens": 12021,
        "total_tokens": 13099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1078,
        "output_tokens": 12021,
        "total_tokens": 13099,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10950,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes – this is a (telescopic) cascode stage.**\n\nChecking the topology:\n\n- **M₁:** signal $V_{in}$ applied to its gate, source grounded → operates as a **common‑source (CS)** device. Its drain drives the node below M₂.\n- **M₂:** gate tied to a constant bias $V_{b1}$ (an AC ground), source connected to M₁'s drain, drain connected to the output → operates as a **common‑gate (CG)** device.\n- Stacking a CG transistor directly on top of a CS transistor in the same current branch (CS stage followed by CG stage) is exactly the definition of a **cascode** structure. $R_D$ simply serves as the load resistor, and $V_{out}$ is taken at the drain of the cascode device M₂.\n\nConsequences that confirm the cascode behavior:\n\n- The resistance seen looking into M₂'s drain is boosted to roughly $g_{m2}r_{O2}r_{O1} + r_{O1} + r_{O2}$, so the gain magnitude is ≈ $g_{m1}\\,(R_{out,\\,stack} \\parallel R_D)$, much larger than a simple CS stage if $R_D$ is large enough (or replaced by a current source).\n- M₂ \"shields\" M₁ from output voltage swings, suppressing the Miller multiplication of $C_{GD1}$ and improving frequency behavior.\n- The only design constraint is choosing $V_{b1}$ so that both devices stay in saturation ($V_{b1} - V_{TH2} \\ge V_{in} - V_{TH1}$, while keeping M₂ saturated at the output).\n\nSo the circuit is indeed a cascode amplifier (specifically the straight/telescopic NMOS cascode, not a folded cascode).",
        "format": "markdown",
        "sha256": "43eb0e9bb4dca419ff69fabe97daf4903af0a14abdf2d8af71708d2abf90f84c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "Incorrectly identifies the circuit as a cascode and treats M₁ as a common-source device. In the figure, M₁ is a PMOS source follower with its drain grounded, so the cascode resistance boost is absent.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 6801,
        "total_tokens": 7940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6399,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1139,
        "output_tokens": 6801,
        "total_tokens": 7940,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6399,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No – as drawn, this is not a cascode.**\n\n**Why it looks like one:** A cascode is a *common‑source* input device stacked with a *common‑gate* \"cascode\" device (the CG transistor's source sitting on the CS transistor's **drain**, its gate at an AC‑ground bias such as V_b1). Here M2 does have its gate at a fixed bias V_b1, so M2 is indeed connected in common‑gate fashion, and the load is R_D.\n\n**Why it fails the test:** Look at the input transistor M1. Its source terminal (the arrowed terminal) is the internal node shared with M2's source, while its drain is tied to ground. That means:\n\n- M1's input is at its gate and its output is taken at its **source** → M1 is a **source follower (common‑drain)**, not a common‑source stage.\n- The two transistors are joined source‑to‑source, not drain‑to‑source as a cascode requires.\n\nSo the signal path is Vin → (common‑drain M1) → internal node → (common‑gate M2) → Vout, i.e., a CD–CG cascade, not the CS–CG cascade that defines a cascode.\n\n**Consequences (confirming it isn't a cascode):**\n\n- The follower action attenuates the signal before it reaches M2: the effective transconductance is only gm1·gm2/(gm1+gm2) instead of gm1, so the gain is roughly (gm1/(gm1+gm2))·gm2·(RD‖Rout) — for equal gm's, about half of a simple CS stage.\n- The output resistance is not boosted to the cascode value ≈ gm2·ro2·ro1; the CG device is degenerated only by 1/gm1, giving Rout ≈ ro2(1+gm2/gm1)+1/gm1 at best, and essentially R_D‑limited behavior in practice. Neither the gain boosting nor the \"shielding\" of the input node (Miller‑effect reduction) of a true cascode is obtained.\n\n**What would make it a cascode:** Connect the input transistor in common‑source — source to ground, **drain** to the source of M2 — with M2's gate at the AC‑ground bias V_b1 and the output taken at M2's drain through R_D. Then M1 (CS) feeds its drain current directly into M2's source (CG), giving the high‑gain, high‑output‑impedance cascode stage.",
        "format": "markdown",
        "sha256": "7fe2f14a9cf6c2b5a3dbbfb493473a99c1a556ad2cd209d33e82851f4e1ebb47"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as a PMOS source follower with its drain grounded, not a common-source stage, so the circuit is not a cascode and lacks cascode output-resistance boosting. The output-resistance discussion is also consistent with the golden solution.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1139,
        "output_tokens": 14571,
        "total_tokens": 15710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1139,
        "output_tokens": 14571,
        "total_tokens": 15710,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14004,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-021-cascode-structure",
      "part": "part1",
      "question_number": 21,
      "question": "Is the circuit shown in the figure a cascode structure?",
      "figures": [
        "tasks/part1-021-cascode-structure/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes – this is a (telescopic) cascode stage.**\n\n**Why:**\n\n- **M₁ is a common‑source (CS) device:** the input signal V_in is applied to its gate and its source is grounded. It converts the input voltage into a drain current.\n- **M₂ is a common‑gate (CG) device:** its gate is tied to a fixed bias voltage V_b1 (an AC ground), and its source sits on the drain of M₁. It simply \"passes\" the signal current of M₁ to the output node while shielding M₁'s drain from the output.\n- **Stacking a CG transistor on top of a CS transistor is precisely the definition of a cascode.** The signal path is: V_in → M₁ (CS) → M₂ (CG) → V_out taken at M₂'s drain through the load R_D.\n\n**Consequences that confirm the cascode behavior:**\n\n- The resistance seen looking into M₂'s drain (i.e., into the stack, excluding R_D) is boosted to roughly\n R_out ≈ (1 + g_m2 r_o2) r_o1 + r_o2 ≈ g_m2 r_o2 r_o1,\n much larger than the r_o1 of a simple CS stage.\n- The voltage gain is A_v = –g_m1 (R_D ‖ R_out) ≈ –g_m1 R_D here (since R_D usually dominates), but the high output resistance of the stack is what makes the cascode valuable (e.g., as a high‑gain stage with active loads, and for improving isolation/bandwidth).\n- Because M₂'s source node follows the input only weakly, the gain across M₁'s gate–drain capacitance is small (≈ g_m1/g_m2), so the Miller multiplication of C_GD1 is greatly reduced compared to a plain CS stage.\n\n**Design condition:** V_b1 must be chosen so that both M₁ and M₂ remain in saturation (V_b1 – V_TH ≥ V_out‑swing requirement, i.e., M₂'s source node and M₁'s drain stay high enough), which is exactly how a cascode is biased.\n\nSo the circuit shown — CS input transistor M₁ stacked with a CG \"cascode\" transistor M₂ biased at V_b1, loaded by R_D — is indeed a cascode structure.",
        "format": "markdown",
        "sha256": "df0a6d5c0f767d7e1feeffcecdc720d1c2f7f29acee04a2e22e112a1a593b915"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 0,
          "is_full_credit": false,
          "rationale": "The answer incorrectly calls the circuit a cascode. M₁ is a PMOS source follower with its drain grounded, not a common-source device, so the structure lacks cascode resistance boosting.",
          "golden_solution_sha256": "7f9e0f88c009a8a25ec2184287032d702e4ac63736a803d1b8f3b4092778054c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1139,
        "output_tokens": 9566,
        "total_tokens": 10705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1139,
        "output_tokens": 9566,
        "total_tokens": 10705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9060,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 0,
        "score_percent": 0,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is large when a capacitance connects the input to a node that has a large voltage swing relative to the input. In a normal common-source/common-emitter stage, the gate-drain or base-collector capacitance sees the full large, inverted output swing, so it appears at the input multiplied by roughly:\n\n\\[\nC_M \\approx C_{gd}(1+|A_v|)\n\\]\n\nIn a cascode, the input transistor’s drain/collector is **not** the high-gain output node. It connects to the source/emitter of a common-gate/common-base transistor, whose gate/base is at AC ground. That internal node is a low-impedance node, roughly \\(1/g_m\\), so the voltage gain from the input transistor’s gate/base to its drain/collector is small, typically about:\n\n\\[\nA_x \\approx -\\frac{g_{m1}}{g_{m2}} \\approx -1\n\\]\n\nTherefore the Miller multiplication of the input transistor’s \\(C_{gd}\\) or \\(C_{bc}\\) is only about a factor of 2, not \\(1+|A_v|\\).\n\nThe large output voltage swing occurs at the drain/collector of the upper cascode transistor, which is isolated from the input. The cascode device acts like a current buffer/shield: it allows high overall voltage gain while preventing that large output swing from being coupled back through the input device’s feedback capacitance.\n\nSo, the Miller effect is less pronounced in a cascode because the high-gain output node is separated from the input, and the capacitance around the input transistor sees only a small voltage change on its far side.",
        "format": "markdown",
        "sha256": "5463944ad5b9a45a6e994514976a5fe7a4fb5f656d83ae1fb9411864fb9b31aa"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode node and the roughly −1 gain to the input transistor’s drain, giving about a 2× Miller factor rather than the full-stage-gain factor. The final ‘small voltage change’ wording is slightly imprecise, but the answer explicitly gives the correct gain and factor.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 75,
        "output_tokens": 3975,
        "total_tokens": 4050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 75,
        "output_tokens": 3975,
        "total_tokens": 4050,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3619,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is large when a capacitance connects the input of an inverting gain stage directly to its high-swing output.\n\nFor a feedback capacitance \\(C_f\\) between input and output,\n\n\\[\nC_{\\text{in, Miller}} = C_f(1 - A_v)\n\\]\n\nwhere \\(A_v\\) is the voltage gain from input to the other side of the capacitor. If \\(A_v\\) is large and negative, this becomes approximately\n\n\\[\nC_f(1+|A_v|)\n\\]\n\nso a small capacitance can look very large at the input.\n\nIn a simple common-source or common-emitter amplifier, \\(C_{gd}\\) or \\(C_{bc}\\) connects the input directly to the high-gain output node, so the Miller multiplication is large.\n\nIn a cascode, the situation changes:\n\n1. The input transistor is followed by a common-gate/common-base transistor.\n2. The drain/collector of the input transistor is connected to the low-impedance source/emitter node of the cascode transistor.\n3. That node has an impedance of roughly \\(1/g_m\\), so its voltage swing is small.\n\nThus the gain from the input transistor’s gate/base to its drain/collector is only about\n\n\\[\nA_x \\approx -\\frac{g_{m1}}{g_{m2}}\n\\]\n\noften near \\(-1\\) or less, instead of the large gain of the whole amplifier. The Miller-multiplied capacitance of the input device becomes roughly\n\n\\[\nC_{gd1}(1 + g_{m1}/g_{m2})\n\\]\n\nrather than\n\n\\[\nC_{gd1}(1 + |A_{\\text{total}}|)\n\\]\n\nwhich is much smaller.\n\nAlso, the final high-swing output node is taken from the upper transistor. Its \\(C_{gd}\\) or \\(C_{bc}\\) connects to the AC-grounded gate/base, not back to the input, so it does not create a large Miller feedback path.\n\nSo the cascode reduces the Miller effect because the input transistor’s drain/collector voltage is held nearly constant, and the upper transistor isolates the input from the large output voltage swing.",
        "format": "markdown",
        "sha256": "68f734a1984a8827b0cc2ae47a84878b188fc57fe64f2db8a4c2f94b7eff91f8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly identifies the low-impedance cascode node and gives the approximate internal gain and reduced Miller multiplication. However, saying the input transistor’s drain is held nearly constant overstates the effect: its gain is often near −1, so the voltage across Cgd1 is still about twice the input swing.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 75,
        "output_tokens": 5605,
        "total_tokens": 5680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 75,
        "output_tokens": 5605,
        "total_tokens": 5680,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5124,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-022-explain-why-miller-effect-less-pronounced-cascode",
      "part": "part1",
      "question_number": 22,
      "question": "Explain why the Miller effect is less pronounced in a cascode.",
      "figures": [],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "The Miller effect is caused by a capacitance that connects the input and output of a gain stage. For a capacitor \\(C_f\\) between input and output, the effective input capacitance is approximately\n\n\\[\nC_{\\text{in, Miller}} = C_f(1 - A_v)\n\\]\n\nwhere \\(A_v = v_{\\text{out}}/v_{\\text{in}}\\). For an inverting stage with large gain, this becomes roughly\n\n\\[\nC_{\\text{in, Miller}} \\approx C_f(1 + |A_v|)\n\\]\n\nSo a large voltage gain makes the feedback capacitance look much larger at the input.\n\nIn a cascode, the input transistor is followed by a common-base/common-gate transistor. This greatly reduces the Miller effect because the drain/collector of the input transistor is held at a low-impedance AC node.\n\nFor a MOS cascode:\n\n- The input transistor is a common-source device.\n- Its drain is connected to the source of the cascode transistor.\n- The cascode transistor’s gate is at AC ground.\n- The source of the cascode transistor presents a low input resistance, roughly\n\n\\[\nr_{\\text{in,cascode}} \\approx \\frac{1}{g_m}\n\\]\n\nTherefore, the drain of the input transistor does not swing much. Its voltage gain is only about\n\n\\[\nA_{v,\\text{internal}} \\approx -\\frac{g_{m1}}{g_{m2}}\n\\]\n\nwhich is often close to \\(-1\\), not the large overall gain of the amplifier.\n\nThus the Miller multiplication of the input transistor’s \\(C_{gd}\\) or \\(C_{bc}\\) is small:\n\n\\[\nC_{\\text{Miller}} \\approx C_{gd}(1 + |A_{v,\\text{internal}}|)\n\\]\n\ninstead of being multiplied by the full amplifier gain.\n\nIn other words, the cascode transistor shields the input from the high-swing output node. The large voltage gain occurs at the output of the cascode device, but the input transistor’s feedback capacitor no longer sees that large output swing. As a result, the effective input capacitance is much smaller, bandwidth increases, and the Miller effect is much less pronounced.",
        "format": "markdown",
        "sha256": "fe6776e7bf21c0799c75906ce5c78d85f4075b5d9f4fda640c444309b5131eb0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the low-impedance cascode source node and the resulting internal gain of roughly −gm1/gm2, so Cgd sees a Miller factor of about 2 rather than the full stage gain. Calling the effect small is slightly imprecise, but the stated factor captures the mechanism.",
          "golden_solution_sha256": "0d298300029d3b4545999675d8ec4b4c83532fca89fa9878f9898848f75f534f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 75,
        "output_tokens": 1736,
        "total_tokens": 1811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 75,
        "output_tokens": 1736,
        "total_tokens": 1811,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 1241,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n- **M₁ (PMOS):** source tied to V_DD, gate tied to the fixed bias V_b2. With both gate and source at AC ground, M₁ carries a constant current and simply presents its output resistance ro1 at the output node → **M₁ is a current‑source (active) load**.\n- **M₂ (NMOS):** gate tied to the fixed bias V_b1 (AC ground), the input V_in is applied to its **source**, and its **drain** is the output node → **M₂ is a common‑gate (CG) stage**.\n- The DC current path is V_DD → M₁ → V_out node → M₂ → (through the V_in source to ground), so I_D1 = I_D2 = I, set by V_b2 (and V_b1, V_in,DC).\n\n**⇒ The circuit is a common‑gate amplifier loaded by a PMOS current source.**\n\n## 2. Bias (large‑signal) conditions\n\n- I = ½ μ_p C_ox (W/L)₁ (V_DD − V_b2 − |V_THP|)² (M₁ in saturation requires V_SD1 ≥ |V_ov1|, i.e. V_out ≤ V_DD − |V_ov1|).\n- M₂ on and saturated: V_GS2 = V_b1 − V_in,DC = V_THN + V_ov2, and V_out ≥ V_b1 − V_THN.\n- Usable swing: **V_b1 − V_THN ≤ V_out ≤ V_DD − |V_ov1|**.\n\n## 3. Small‑signal analysis\n\nReplace M₁ by ro1 (its gate/source are AC ground). For M₂: v_gs2 = −v_in, v_bs2 = −v_in (body effect), v_ds2 = v_out − v_in.\n\nKCL at the output node:\n\nv_out/ro1 + (v_out − v_in)/ro2 − (gm2 + gmb2) v_in = 0\n\n**Voltage gain (non‑inverting):**\n\nA_v = (gm2 + gmb2 + 1/ro2)(ro1 ∥ ro2) ≈ (gm2 + gmb2)(ro1 ∥ ro2)\n\n**Output resistance** (v_in = 0 ⇒ source of M₂ grounded ⇒ no degeneration):\n\nR_out = ro1 ∥ ro2\n\n**Input resistance** (looking into the source of M₂, with ro1 as the drain load):\n\nR_in = (ro1 + ro2) / [1 + (gm2 + gmb2) ro2]  ≈ 1/(gm2 + gmb2)  (low; ≈ 2/(gm2+gmb2) if ro1 ≈ ro2)\n\n## 4. Interpretation / properties\n\n- **Positive (non‑inverting) gain** of order gm(ro1∥ro2) — a single‑stage voltage amplifier.\n- **Low input impedance, high output impedance:** the stage acts as a good **current buffer** (copies input current into the high‑impedance load), but attenuates if driven by a source with series resistance R_s: A_v,eff = A_v · R_in/(R_in + R_s).\n- **Good high‑frequency behavior:** the gate of M₂ is grounded, so there is no Miller multiplication of C_GD; the CG input node is low impedance.\n- Body effect *helps* here: gmb2 adds to gm2 in the gain and lowers R_in (unlike in a source follower or CS stage with degeneration).\n- Typical uses: CG gain stage, cascode input device, current buffer, or wideband amplifier stage.\n\n**Summary:** CG stage (M₂) + current‑source load (M₁); A_v ≈ (gm2+gmb2)(ro1∥ro2), R_in ≈ 1/(gm2+gmb2), R_out = ro1∥ro2, non‑inverting, low‑Z input / high‑Z output.",
        "format": "markdown",
        "sha256": "5af83697c3faaf2879c7fbee8661086b7ea71f654eb16391d4c850c5340f1abb"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with a PMOS current-source load, places Vin at M2’s source, identifies the bias voltages, and gives the non-inverting gain and low input resistance. The gain expression including body effect is an acceptable equivalent; the additional details do not contradict the topology.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 8682,
        "total_tokens": 9688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 8682,
        "total_tokens": 9688,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7794,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Topology identification\n\n- **M₁ (PMOS):** source tied to V_DD, gate tied to the constant bias V_b2. With both gate and source at AC ground, M₁ behaves as a **constant current source (active load)** connected from V_DD to the output node; its only small‑signal contribution is its output resistance r_o1 from V_out to AC ground.\n- **M₂ (NMOS):** gate tied to the constant bias V_b1 (AC ground), the signal V_in is applied to its **source**, and the output is taken at its **drain**. This is a **common‑gate (CG) stage**.\n- The same DC current flows V_DD → M₁ → M₂ → into the input source, so M₁ also sets the bias current of M₂.\n\n**So the circuit is a common‑gate amplifier loaded by a PMOS current source.**\n\n## Biasing / swing conditions\n\n- I_D = I_D1 = I_D2 is fixed by M₁: |V_OD1| = |V_DD − V_b2| − |V_TH1|.\n- M₂'s V_GS is set by V_b1 − V_in,DC (the input must supply the proper DC level ≈ V_b1 − V_TH2 − V_OD2).\n- Saturation requires: V_in + V_OD2 ≤ V_out ≤ V_DD − |V_OD1| (limited swing at both ends, typical of current‑source loading).\n\n## Small‑signal analysis\n\nReplace M₁ by r_o1 to AC ground. For M₂: v_gs = −v_in, v_bs = −v_in (body effect matters since the source moves). KCL at the output node:\n\nv_out/r_o1 + (v_out − v_in)/r_o2 − (g_m2 + g_mb2)v_in = 0\n\n**Voltage gain (non‑inverting):**\n\nA_v = (g_m2 + g_mb2)(r_o1 ∥ r_o2) + r_o1/(r_o1 + r_o2) ≈ (g_m2 + g_mb2)(r_o1 ∥ r_o2) ≈ g_m2(r_o1 ∥ r_o2)\n\ni.e., the maximum gain a single CG stage can provide, since the load is ideal (a current source).\n\n**Input resistance** (looking into the source of M₂, with load r_o1 at the drain):\n\nR_in = (r_o1 + r_o2)/[1 + (g_m2 + g_mb2)r_o2] ≈ (1 + r_o1/r_o2)/(g_m2 + g_mb2) ~ 1/g_m2 → **low**\n\n**Output resistance** (v_in killed → M₂'s source grounded):\n\nR_out = r_o1 ∥ r_o2 → **high**\n\nIf the driving source has resistance R_s, the gain is attenuated by the input divider: A_v → A_v·[R_in/(R_in + R_s)] ≈ A_v/[1 + (g_m2+g_mb2)R_s].\n\n## Operation and characteristics\n\n- A rise in v_in lowers V_GS2, reducing the current pulled from the output node; M₁'s constant current then raises V_out → **positive (non‑inverting) gain**.\n- Low input impedance + high output impedance ⇒ good **current buffer**; useful for amplifying signals from low‑impedance sources (e.g., RF/cable inputs, current‑mode signals).\n- No Miller multiplication of C_GD (gate is grounded) ⇒ **better high‑frequency response** than a common‑source stage.\n- Penalty: small voltage headroom (output swing limited by two overdrive voltages) and sensitivity to source resistance through the low R_in; body effect (g_mb2) adds to the transconductance here since the source is the input node.\n\n**Summary:** CG stage with current‑source load; A_v ≈ g_m2(r_o1 ∥ r_o2) (non‑inverting), R_in ≈ 1/(g_m2+g_mb2), R_out = r_o1 ∥ r_o2.",
        "format": "markdown",
        "sha256": "ade1ebb3df79f6bac56f8f7523c9d6b6a62553825bf27ac8b7ebc35b8e6777ee"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places Vin at M2’s source, and gives the non-inverting gain and low input resistance. The gain and input-resistance expressions are consistent with the golden solution; extra details do not undermine the essential answer.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 9868,
        "total_tokens": 10874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 9868,
        "total_tokens": 10874,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8976,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-023-common-gate-pmos-load",
      "part": "part1",
      "question_number": 23,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-023-common-gate-pmos-load/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Reading the schematic\n\n- **M₁ (PMOS):** source tied to V_DD, gate tied to the constant bias V_b2, drain connected to the output node. With gate and source at AC ground, M₁ is simply a **current‑source (active) load**, whose small‑signal model is just r_o1 from V_out to AC ground.\n- **M₂ (NMOS):** gate tied to the constant bias V_b1, the signal V_in is applied to the **source**, and the drain goes to V_out. This is a **common‑gate (grounded‑gate) stage**.\n- The arrows on the source leads (bulk tied to source) mean g_mb = 0 for both devices.\n- V_out is taken at the common drain node.\n\n**DC operation:** M₁ fixes the bias current I_D (set by V_b2); V_b1 and the DC level of V_in must produce V_GS2 = V_b1 − V_in = V_TH2 + V_OV2 to carry that same current. Saturation requires V_in + V_OV2 ≤ V_out ≤ V_DD − |V_OV1|, which defines the output swing.\n\n## Small‑signal analysis\n\nWith v_gs2 = −v_in and KCL at the output node (output open):\n\n−g_m2·v_in + (v_out − v_in)/r_o2 + v_out/r_o1 = 0\n\n**Voltage gain**\n\nA_v = v_out/v_in = (g_m2 + 1/r_o2)(r_o1 ∥ r_o2) = (g_m2 r_o2 + 1)·r_o1/(r_o1 + r_o2) ≈ **g_m2 (r_o1 ∥ r_o2)** (non‑inverting)\n\n**Input resistance** (looking into the source of M₂, with the load r_o1 at its drain)\n\nR_in = (r_o1 + r_o2)/(1 + g_m2 r_o2) ≈ (1/g_m2)(1 + r_o1/r_o2)\n\n**Output resistance** (v_in killed → source of M₂ at AC ground)\n\nR_out = r_o1 ∥ r_o2\n\n**Useful limits:** if r_o2 → ∞, A_v → g_m2 r_o1 and R_in → 1/g_m2; if r_o1 → ∞ (ideal load), A_v → g_m2 r_o2 + 1 (the intrinsic gain) and R_in → ∞ (a perfect current source forbids any change in source current).\n\n## Interpretation and properties\n\n- **Function:** a common‑gate voltage amplifier loaded by a current source. Intuitively, raising v_in lowers V_GS2, reducing the current pulled through r_o1, so V_out rises → non‑inverting gain of the same magnitude order as a common‑source stage with the same load, g_m(r_o1∥r_o2).\n- **Impedances:** the input resistance is low (≈1/g_m2) when the drain load is small, which makes the CG stage suitable for interfacing low‑impedance sources or as a current buffer; here the large current‑source load \"boosts\" R_in by (1 + r_o1/r_o2). The output resistance r_o1∥r_o2 is moderately high.\n- **Frequency response:** since the gate is grounded, C_GD sits from drain to ground and there is no Miller multiplication of the input capacitance, giving the CG stage a much better high‑frequency behavior than a common‑source stage (this is why it is also used in cascode structures).\n- **Body effect:** if the bulks were *not* tied to the sources, replace g_m2 by (g_m2 + g_mb2) in the gain and R_in expressions; M₁ would still contribute only r_o1.\n\n**Summary:** the circuit is a common‑gate amplifier (M₂) with a PMOS current‑source load (M₁), providing A_v ≈ g_m2(r_o1∥r_o2) (non‑inverting), R_in ≈ (r_o1+r_o2)/(1+g_m2 r_o2), and R_out = r_o1∥r_o2.",
        "format": "markdown",
        "sha256": "ea1e4704af6d59cc4a313952774ed89bbc9100bdce913be6da40b1c00f853ce7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate NMOS with PMOS current-source load, places the input at M₂’s source, and gives the non-inverting gain and low input resistance. The gain and input-resistance expressions are consistent with the stated source-tied bulk assumption; extra details do not contradict the essential analysis.",
          "golden_solution_sha256": "bef1a8379b057bee5021488ff4aa65884dec1cb905b95a6d1d764f0128473407",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 12516,
        "total_tokens": 13522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1006,
        "output_tokens": 12516,
        "total_tokens": 13522,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11590,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning:**\n- **Node 1 (gate of M₁):** This node sees C_GS to ground and C_GD to the output. Driven through R_S, it forms one energy‑storing node → one pole.\n- **Node 2 (output node, V_out):** This node collects C_DB, C_GD (back to the gate), and—since M₂'s gate and source are both at AC ground—C_GD2 and C_DB2 also appear from this node to ground. M₂ itself carries no signal current (v_GS = 0), so it merely adds capacitance to the output node → second pole.\n- The node between V_in and R_S has no capacitance and is driven by an ideal source, so it contributes no pole.\n\nWith only two independent energy‑storing nodes, the transfer function is second order: the circuit has **2 poles**.",
        "format": "markdown",
        "sha256": "a91f6787c7b5eb7b15c196d486211362e95b6189fd2aaf1f8b95c18066f78ac0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies two independent capacitive nodes and assigns the relevant capacitances to the gate and output nodes. The minor simplification about M₂ carrying no signal current does not affect the pole count.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1472,
        "output_tokens": 6292,
        "total_tokens": 7764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1472,
        "output_tokens": 6292,
        "total_tokens": 7764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6093,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning:**\n\n- **Identify the capacitive nodes.** Although five capacitors are drawn, they only touch two independent (non‑grounded) nodes:\n  - **Input node** (gate of M₁, after R_S): holds C_GS (to ground) and one plate of C_GD.\n  - **Output node** (V_out, drains of M₁ and M₂): holds C_DB, C_GD2, C_DB2 (all of which effectively go to AC ground, since M₂'s gate and its other terminal are grounded) and the other plate of C_GD.\n\n- **Count independent state variables.** Every capacitor is either from one of these two nodes to ground or bridges the two nodes (C_GD). There are no other floating nodes with stored charge, so the network has only **two independent energy‑storing states** (V_X at the gate of M₁ and V_out).\n\n- **Conclusion.** The transfer function V_out/V_in is therefore second order: one pole associated with the input node (roughly 1/[R_S·(input capacitance)]) and one with the output node (roughly 1/[R_out·(total load capacitance)]), with C_GD coupling them (and creating a zero).\n\n**The circuit has 2 poles.**",
        "format": "markdown",
        "sha256": "de614ff675854dd1e6562dcceabeb83eec5925652476fb7f6700da360fc03e60"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent capacitive nodes—the M1 gate and output—and assigns the capacitors to them appropriately, concluding there are two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1472,
        "output_tokens": 8659,
        "total_tokens": 10131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8373,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1472,
        "output_tokens": 8659,
        "total_tokens": 10131,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8373,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-024-many-poles-have",
      "part": "part1",
      "question_number": 24,
      "question": "How many poles does the circuit shown in the figure have?",
      "figures": [
        "tasks/part1-024-many-poles-have/figure-18.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Two poles.**\n\n**Reasoning:**\n\n- M₂'s gate and source are both at AC ground, so M₂ acts as a current‑source load. Its capacitances C_GD2 and C_DB2 therefore connect the output node to AC ground, simply adding in parallel with C_DB.\n- The circuit then reduces to a common‑source stage with:\n  - Node 1 (gate of M₁): C_GS to ground, plus C_GD bridging to the output, driven through R_S.\n  - Node 2 (output): C_DB + C_GD2 + C_DB2 to ground, plus C_GD back to the gate.\n- There are only **two independent energy‑storing nodes** (the three capacitor groups are tied between these two nodes and ground), so the transfer function V_out/V_in is second order.\n\nHence the circuit has **2 poles** (an input pole and an output pole, with C_GD coupling them via the Miller effect), along with one left‑half‑plane zero from C_GD feedthrough.",
        "format": "markdown",
        "sha256": "238c30832ba2326b812b04feac5d19fa816b50f01558e3f72e23a51b8e545518"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the two independent dynamic nodes—the M₁ gate and output—and assigns the capacitors to them, satisfying the full-credit rule for two poles.",
          "golden_solution_sha256": "a186c7d78b22ed309b07c9b6c97e61997ddf23f0ee23de6faa3536cb2c682d8c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1472,
        "output_tokens": 6363,
        "total_tokens": 7835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1472,
        "output_tokens": 6363,
        "total_tokens": 7835,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6133,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit topology\n\n- M₁: source grounded, gate at V_in → common‑source device.\n- M₂: source tied to M₁'s drain (call this node V_X), gate **also** tied to V_in, drain at V_out.\n- R_D connects V_out to V_DD; output is taken at the drain of M₂.\n\nSo the two transistors are **in series (stacked) with their gates connected together**. This stack is the driving device of a common‑source stage with resistive load R_D.\n\n## Key observation: operating regions\n\nAssume identical NMOS devices with equal V_TH (λ = γ = 0 for simplicity).\n\n- M₁ **cannot** be in saturation while current flows: M₁ saturation requires V_X ≥ V_in − V_TH, but then V_GS2 = V_in − V_X ≤ V_TH, which cuts M₂ off.\n- Therefore, when conducting: **M₁ operates in the triode region and M₂ in saturation** (as long as V_out ≥ V_in − V_TH).\n\nSolving I_D1(triode) = I_D2(saturation) with k = μₙC_ox(W/L):\n\n- V_X = (1 − 1/√2)(V_in − V_TH) ≈ 0.29 (V_in − V_TH)\n- I_D = (k/4)(V_in − V_TH)² = (k_eff/2)(V_in − V_TH)², with **k_eff = k/2**\n\n**Interpretation:** two identical series transistors with a common gate behave as **one equivalent transistor with doubled channel length** ((W/L)_eff = (W/L)/2), same threshold, and its own \"saturation\" edge at V_out = V_in − V_TH. (If V_out < V_in − V_TH, both devices enter triode and the composite device is in triode.)\n\n## Small‑signal analysis\n\nSmall‑signal model at node X (M₁ in triode: transconductance g_m1' = k·V_X and drain conductance g_ds1 = k(V_in−V_TH−V_X); M₂ saturated: g_m2 = k(V_in−V_TH−V_X)):\n\nKCL at X: g_m2(v_in − v_X) = g_m1'·v_in + g_ds1·v_X → v_X ≈ 0.29 v_in (node X is *not* a virtual ground; it follows the input partially).\n\nOutput current: i_out = g_m2(v_in − v_X) = (k/2)(V_in − V_TH)·v_in\n\nHence the effective transconductance of the stage:\n\n**G_m = (1/2) μₙC_ox (W/L)(V_in − V_TH) = √(μₙC_ox (W/L)·I_D)** — i.e., half the g_m of a single device of the same size at the same overdrive, exactly as expected for a device of double length.\n\n## Gain and impedances\n\n- **Voltage gain:** A_v = −G_m (R_D ‖ R_out,comp) ≈ **−G_m R_D**, since the composite device's output resistance R_out,comp ≈ r_O2(1 + g_m2·R_X) + R_X ≈ 2r_O2 + 1/g_m2 (with R_X = 1/g_ds1 = 1/g_m2) is normally ≫ R_D.\n- **Input resistance:** ∞ at DC (gates only).\n- **Output resistance:** ≈ R_D ‖ (2r_O2 + 1/g_m2) ≈ R_D.\n- **Output swing:** V_out,max = V_DD (device off); the stage stays in its high‑gain (composite‑saturation) region only while V_out ≥ V_in − V_TH; below that the gain collapses (composite triode).\n- **Bias point:** V_out = V_DD − I_D·R_D with I_D = (k/4)(V_in − V_TH)².\n\n## Summary\n\nThe circuit is a common‑source amplifier whose driver is a **composite transistor** formed by stacking M₁ and M₂ with gates tied together. M₁ sits in the triode region, M₂ in saturation; together they act like a single NMOS with (W/L)_eff = (W/L)/2 (double channel length). Consequently:\n\n- I_D = (1/2)·μₙC_ox(W/L/2)(V_in − V_TH)²\n- A_v ≈ −(1/2) μₙC_ox (W/L)(V_in − V_TH)·R_D = −√(μₙC_ox (W/L) I_D)·R_D\n- R_in = ∞, R_out ≈ R_D\n\n(If the bodies are tied to ground rather than to the sources, body effect raises V_TH2 and shifts the split of V_X slightly, but the composite‑transistor picture and the gain formula remain essentially unchanged.)",
        "format": "markdown",
        "sha256": "2b09dc51f31e1eba53743c5d85f6ba2bd954d1096d81d6b46aeb3b2b3e1256fc"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the common-gate series NMOS stack, with M1 in triode and M2 in saturation, and concludes that identical devices behave approximately like one device with twice the channel length. The added square-law and small-signal analysis is consistent with that mechanism; its simplifying assumptions do not undermine the essential answer.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1144,
        "output_tokens": 15581,
        "total_tokens": 16725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1144,
        "output_tokens": 15581,
        "total_tokens": 16725,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14477,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Topology\n\n- **M₁**: source grounded, gate at V_in → common‑source device.\n- **M₂**: stacked on top of M₁ (its source sits on M₁'s drain, node X), and its **gate is also tied to V_in**.\n- **R_D**: load resistor to V_DD; output taken at M₂'s drain.\n\nSo the two transistors form a **series (stacked) composite transistor** driven by one input. It resembles a cascode, except the cascode gate is not at a fixed bias – it is connected to the input.\n\n## Key Observation\n\nBecause M₁ and M₂ are in series, **they carry the same drain current**. With λ = γ = 0, M₁'s current is set solely by v_GS1 = v_in:\n\ni_D = g_m1·v_in\n\nThis current must flow through M₂ and into R_D, regardless of M₂'s parameters (M₂'s v_GS simply adjusts to pass it). Therefore:\n\nv_out = –i_D·R_D  ⟹ **A_v = –g_m1·R_D**\n\nThe gain is identical to a simple common‑source stage; M₂ contributes no extra gain, it merely \"passes\" M₁'s current (it acts as a current buffer). Note the gain is independent of g_m2.\n\n## General Result (finite r_o, body effect)\n\nWriting KCL at node X and at the output (G₂ = g_m2 + g_mb2 + 1/r_o2):\n\nA_v = – R_D (g_m1 r_o1 G₂ + g_m2) / (1 + r_o1 G₂ + R_D/r_o2) = – G_m (R_D ‖ R_out)\n\nwith\n\n- G_m = (g_m1 r_o1 G₂ + g_m2)/(1 + r_o1 G₂) ≈ g_m1\n- R_out (looking into M₂'s drain) = r_o1 + r_o2 + (g_m2 + g_mb2) r_o1 r_o2  ← the familiar **cascode** expression (valid because with v_in = 0 both gates are grounded)\n\nSince typically R_out ≫ R_D, this again reduces to A_v ≈ –g_m1 R_D.\n\n## Impedances\n\n- **R_in = ∞** (both gates are insulated).\n- **R_out = R_D ‖ [r_o1 + r_o2 + (g_m2 + g_mb2) r_o1 r_o2]** — i.e., R_D in parallel with a cascode‑boosted resistance.\n\n## Biasing Caveat\n\nFor both devices to conduct *and* M₁ to stay saturated would require V_DS1 = V_GS1 – V_GS2 ≥ V_GS1 – V_TH, i.e. V_GS2 ≤ V_TH, which contradicts M₂ being on. Hence in a real DC operating point **M₁ sits in the triode region** (behaving as a small resistance in M₂'s source) while M₂ is saturated; the stage then behaves essentially as M₂'s common‑source stage with partially cancelled source degeneration. In the idealized (textbook) analysis assuming saturation, the result above holds.\n\n## Summary\n\n| Quantity | Value |\n|---|---|\n| Configuration | Stacked NMOS pair (composite transistor), resistively loaded |\n| Voltage gain (λ = γ = 0) | A_v = –g_m1 R_D |\n| Gain (general) | –G_m(R_D ‖ R_out), G_m ≈ g_m1 |\n| Output resistance | R_D ‖ [r_o1 + r_o2 + (g_m2+g_mb2)r_o1 r_o2] |\n| Input resistance | ∞ |\n| Phase | Inverting |\n\nThe circuit teaches an important point: stacking a second gate‑driven transistor does **not** increase gain (the series current is fixed by M₁); it only raises the output resistance (cascode‑like) at the cost of voltage headroom.",
        "format": "markdown",
        "sha256": "7529c18b8a825bf41ed9a37d6f35678b9e9abfb54cf5741d75ccadeb22f40656"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It correctly identifies the common-gate-driven series pair and notes that M1 is triode while M2 is saturated, but its main analysis treats the circuit as a cascode and claims cascode-boosted output resistance. It misses the central result that the pair behaves approximately as one NMOS with a longer effective channel.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1144,
        "output_tokens": 12752,
        "total_tokens": 13896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1144,
        "output_tokens": 12752,
        "total_tokens": 13896,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11865,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-025-series-nmos-effective-long-channel",
      "part": "part1",
      "question_number": 25,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-025-series-nmos-effective-long-channel/figure-19.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology identification\n\n- **M₁ and M₂ are NMOS devices stacked in series**: M₁'s source is grounded, M₁'s drain connects to M₂'s source, and M₂'s drain is the output node.\n- **Both gates are tied to V_in** (the dot on the input line connects to M₁'s gate and, through the vertical wire, to M₂'s gate).\n- **R_D** is the load resistor from V_DD to the output node.\n\nSo this is a **common‑source stage whose \"transistor\" is a composite (series) pair** – equivalent to a single NMOS with twice the channel length (half the W/L), since two identical series devices with a common gate carry the same current with the same total overdrive.\n\n## 2. DC (bias) behavior\n\nThe same drain current flows through both devices. With V_X = V_DS1 = V_S2:\n\n- V_GS1 = V_in, V_GS2 = V_in − V_X.\n- Note the region constraint: if M₁ were in saturation (V_X ≥ V_in − V_TH), then V_GS2 ≤ V_TH and M₂ would cut off. Hence, when conducting, **M₂ sits in saturation and M₁ in the triode region**, and the pair reproduces the I–V of one saturated MOSFET with (W/L)/2:\n\nI_D = (1/2)·μ_nC_ox(W/L)/2·(V_in − V_TH)², valid for V_out ≥ V_in − V_TH.\n\n## 3. Small‑signal gain\n\nWriting KCL at the internal node X and at the output (i₁ = i₂ = −v_out/R_D):\n\n- g_m1·v_in + v_X/r_o1 = g_m2(v_in − v_X) + (v_out − v_X)/r_o2 = −v_out/R_D\n\n**Ideal case (λ = 0):** the series connection forces M₂ to pass M₁'s current, i = g_m1·v_in (the node X voltage simply adjusts to v_X = v_in(1 − g_m1/g_m2), i.e. v_X = 0 for matched devices). Therefore\n\n**A_v = v_out/v_in = −g_m1·R_D**\n\n—the stack gives exactly the gain of a simple CS stage; M₂ neither adds nor loses transconductance.\n\n**General case (finite r_o):**\n\nA_v = − R_D (g_m1 g_m2 r_o1 r_o2 + g_m1 r_o1 + g_m2 r_o2) / (R_D + r_o1 + r_o2 + g_m2 r_o1 r_o2)\n\nEquivalently, A_v = −G_m·(R_D ‖ R_out) with G_m ≈ g_m1 for large r_o.\n\n## 4. Terminal resistances\n\n- **R_in = ∞** (gates only).\n- **R_out = R_D ‖ [r_o1 + r_o2 + g_m2 r_o1 r_o2]** (with body effect, g_m2 → g_m2 + g_mb2). The bracketed term is the cascode‑type resistance of the stack: looking into M₂'s drain with M₁'s r_o1 as source degeneration.\n\n## 5. Interpretation / summary\n\n| Quantity | Result |\n|---|---|\n| Configuration | CS stage with composite (series‑stacked) input transistor |\n| Equivalent device | Single NMOS with (W/L)_eq = (W/L)/2 |\n| Gain (λ = 0) | −g_m1 R_D (same as simple CS) |\n| Gain (with r_o) | −G_m(R_D ‖ R_out), boosted by high R_out ≈ g_m2 r_o1 r_o2 |\n| R_in | ∞ |\n| R_out | R_D ‖ (r_o1 + r_o2 + g_m2 r_o1 r_o2) |\n\n**Key insight:** because both gates share the input signal, the stack passes the full transconductance current of M₁ to the output (unlike a cascode, no separate bias voltage is needed), while the series connection raises the output resistance toward the output node. With λ = 0 the extra device changes nothing (A_v = −g_m1R_D); with finite r_o it increases the gain by raising R_out, at the cost of one extra V_DS of headroom (and keeping M₁ in the triode region).",
        "format": "markdown",
        "sha256": "b8a06e45ec1bcd02de5cf7a47b5e512dc9068b5ef6d35abf1288a7ffa36797c9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies the common-gate series NMOS pair, its triode/saturation operating regions, and the effective channel length of about 2L. However, it then treats the lower device as having ro1 and claims cascode-like gm·ro output-resistance multiplication and gain boosting. The lower device is in triode, so this is the key small-signal mechanism error; the output-resistance increase is modest, not cascode-like.",
          "golden_solution_sha256": "f4c42a319616e7d942081a3389417d0f1c64822932dcec21eebd003d9f6660ad",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1144,
        "output_tokens": 16088,
        "total_tokens": 17232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1144,
        "output_tokens": 16088,
        "total_tokens": 17232,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15095,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Identifying the topology\n\n- M₁ and M₂ share a common source node tied to an ideal tail current source I₁ → this is a **source‑coupled (differential) pair**.\n- The input drives M₁'s gate; M₂'s gate is held at a constant bias V_b, so **M₂'s gate is an AC ground**.\n- M₁'s drain goes straight to V_DD (AC ground); the output is taken **single‑ended** at M₂'s drain through R_D.\n\nEquivalently, since M₁'s drain is at AC ground and M₂'s gate is at AC ground, the circuit can be viewed as a **source follower (M₁) driving a common‑gate stage (M₂)** through the shared source node X. Either view gives the same result; the pair simply \"steers\" the fixed tail current between the two branches.\n\n## 2. Bias (large‑signal) behavior\n\n- KCL: I_D1 + I_D2 = I₁. With matched devices and V_in = V_b, I_D1 = I_D2 = I₁/2, so V_out = V_DD − (I₁/2)R_D (mid‑swing design point).\n- Transfer characteristic: as V_in sweeps from low to high, current switches from M₂ to M₁:\n - V_in ≪ V_b: M₁ off, I_D2 = I₁ → V_out = V_DD − I₁R_D (minimum)\n - V_in ≫ V_b: M₂ off, I_D2 = 0 → V_out = V_DD (maximum)\n- Saturation requirements: V_out ≥ V_b − V_TH2 (M₂), V_DD − V_X ≥ V_in − V_TH1 (M₁, easily met), plus headroom for I₁.\n\n## 3. Small‑signal voltage gain\n\nReplace V_DD, V_b by AC ground and I₁ by an open circuit. Let v_X be the common‑source node (neglecting r_o first):\n\n**Node X:** g_m1(v_in − v_X) − g_m2 v_X = 0 → v_X = [g_m1/(g_m1+g_m2)]·v_in (= v_in/2 if matched)\n\n**Output node:** the current through R_D equals M₂'s drain current, i_D2 = −g_m2 v_X, so v_out = −i_D2 R_D = g_m2 R_D v_X.\n\n$$A_v = \\frac{v_{out}}{v_{in}} = \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\,R_D \\;\\;\\xrightarrow{\\;matched\\;}\\;\\; +\\frac{g_m R_D}{2}$$\n\nThe gain is **non‑inverting** and, for matched devices, **half that of a common‑source stage** with the same R_D, because the source node moves by v_in/2, so v_gs1 = v_in/2.\n\nIncluding finite r_o (exact nodal analysis):\n\n$$A_v \\approx \\frac{g_{m1}g_{m2}}{g_{m1}+g_{m2}}\\;\\Big[R_D \\,\\|\\, \\big(r_{o2}(1+g_{m2}R_S)+R_S\\big)\\Big],\\quad R_S = r_{o1}\\,\\|\\,\\tfrac{1}{g_{m1}}$$\n\nFor matched devices R_S ≈ 1/g_m and the bracketed drain resistance ≈ 2r_o, giving A_v ≈ (g_m/2)(R_D ‖ 2r_o).\n\n## 4. Input and output resistance\n\n- **R_in = ∞** (MOS gate). Note there is no Miller multiplication of C_GD1 because M₁'s drain is at AC ground → wideband input.\n- **R_out = R_D ‖ [r_{o2}(1+g_{m2}R_S)+R_S]**, with R_S as above; ≈ R_D if r_o → ∞ (≈ R_D ‖ 2r_o otherwise).\n\n## 5. Key insights\n\n- **Why gain exists even though M₁'s drain has no load:** the ideal tail forces i_D2 = I₁ − i_D1, so M₁'s signal current is *steered* through M₂ and R_D. The stage works as a current‑steering (differential) amplifier with single‑ended output.\n- **Phase:** increasing v_in pulls current away from M₂, dropping less voltage across R_D → v_out rises (non‑inverting), consistent with taking the output at the \"opposite\" drain of a diff pair.\n- **Role of the tail:** if I₁ had finite resistance R_SS, the gain would be multiplied by 2g_mR_SS/(1+2g_mR_SS); with R_SS → 0 the gain vanishes (node X pinned, v_gs2 = 0). The ideal tail is what makes the follower→CG cascade work.\n- **Trade‑off vs. a CS stage:** gain is halved (g_mR_D/2), but the input is non‑inverting, input capacitance is low (follower action, no Miller effect), and the output swing is V_DD − I₁R_D ≤ V_out ≤ V_DD.\n\n**Summary:** This is a differential pair with single‑ended output (equivalently, a source follower cascaded with a common‑gate stage), providing a non‑inverting gain A_v ≈ g_mR_D/2 (matched, ideal tail), infinite input resistance, and output resistance ≈ R_D.",
        "format": "markdown",
        "sha256": "65d9e9f0ac9254f97027e6e21836e393827ccd05f89ea057d09995b7f5a427bf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the circuit as both a source follower driving a common-gate stage and a source-coupled pair with M₂ biased at V_b and output at its drain; the derived gain and non-inverting sign also match the golden solution.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1847,
        "output_tokens": 10363,
        "total_tokens": 12210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1847,
        "output_tokens": 10363,
        "total_tokens": 12210,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9128,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n- M₁ and M₂ share a common source node biased by an ideal tail current source I₁ → this is an **NMOS differential pair**.\n- The input V_in drives M₁; the gate of M₂ is held at a fixed bias V_b (AC ground).\n- M₁'s drain is tied directly to V_DD (no load), and the output is taken **single‑ended** at M₂'s drain through R_D.\n\nEquivalently, it can be viewed as a cascade: M₁ is a **source follower** (drain at AC ground) that develops the signal at the common source node X, and M₂ is a **common‑gate** stage that amplifies v_X into R_D.\n\n## 2. DC (bias) conditions\n\nWith V_in = V_b (balanced pair): I_D1 = I_D2 = I₁/2, and\n\n- V_out,DC = V_DD – (I₁/2)·R_D\n- V_X = V_b – V_GS2 = V_in – V_GS1\n- Saturation requires: V_out ≥ V_b – V_TH2 (M₂), and V_DD ≥ V_in – V_TH1 (M₁, automatically satisfied).\n\n## 3. Small‑signal voltage gain (λ = 0, matched devices)\n\nLet v_X be the small‑signal voltage at the common source node. Since the tail source absorbs no signal current:\n\ngm(v_in – v_X) + gm(0 – v_X) = 0  →  **v_X = v_in/2**\n\nM₂'s drain signal current is i_d2 = gm(0 – v_X) = –gm·v_in/2, which flows through R_D:\n\nv_out = –i_d2·R_D = +(gm·R_D/2)·v_in\n\n$$A_v = \\frac{v_{out}}{v_{in}} = +\\frac{g_m R_D}{2}$$\n\n**Checks and insights**\n\n- **Non‑inverting:** v_in ↑ → M₁ steals current → M₂'s current ↓ → drop on R_D ↓ → v_out ↑.\n- **Cascade view:** follower gain = (1/g_m2)/(1/g_m1 + 1/g_m2) = ½; CG gain = g_m2 R_D; product = g_m R_D/2. ✔\n- **Differential nature:** by superposition, v_out = (g_m R_D/2)(v_in – v_b); V_in is the non‑inverting input, V_b the inverting one.\n- **Body effect cancels:** including g_mb for both devices gives v_X = g_m v_in/[2(g_m+g_mb)] and v_out = (g_m+g_mb)v_X R_D = g_m R_D v_in/2 — unchanged.\n- In bias terms: A_v = (I₁ R_D)/(2 V_OV), i.e. gain rises as the overdrive voltage is reduced.\n- The gain is **half** that of a simple CS stage (g_m R_D) at the same R_D, because the signal current is steered: only g_m v_in/2 reaches the output.\n\n**With finite r_o (matched):** looking into M₂'s drain (CG with source degeneration ≈ 1/g_m) gives ≈ 2r_o, so\n\n$$A_v \\approx \\frac{g_m}{2}\\,(R_D \\parallel 2r_o)$$\n\n## 4. Input and output resistance\n\n- **R_in = ∞** at low frequency (gate terminal).\n- **R_out = R_D ∥ [r_o2 + (1+(g_m2+g_mb2)r_o2)(r_o1 ∥ 1/g_m1)] ≈ R_D ∥ 2r_o.**\n\n## 5. Swing and linearity\n\n- Linear (small‑signal) range: |v_in – v_b| ≲ √2·V_OV; beyond that the pair switches all of I₁ to one side.\n- Output swing: from V_b – V_TH2 (edge of M₂ saturation) up to V_DD (M₂ cut off, all of I₁ in M₁).\n- The output node (R_D ∥ 2r_o with load capacitance) sets the dominant pole; node X is a low‑impedance node (≈1/g_m) and contributes only a high‑frequency pole.\n\n## Summary\n\n| Quantity | Result |\n|---|---|\n| Topology | Diff. pair, single‑ended output (= source follower → common‑gate) |\n| Bias current per device | I₁/2 |\n| V_out,DC | V_DD – I₁R_D/2 |\n| Voltage gain | +g_m R_D/2 (≈ (g_m/2)(R_D∥2r_o) with r_o); independent of g_mb |\n| R_in | ∞ (gate) |\n| R_out | R_D ∥ 2r_o ≈ R_D |\n| Phase | Non‑inverting from V_in |\n\nSo the circuit is a **single‑ended‑output differential amplifier** providing a modest, non‑inverting gain of g_m R_D/2 with very high input resistance and output resistance ≈ R_D.",
        "format": "markdown",
        "sha256": "02452f4f1d379d6989ed00f7eb1efdc716e1ee8c3c4dbf52fe1b699057b07b98"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-follower-to-common-gate topology (equivalently, the source-coupled differential pair) and gives the correct non-inverting gain. Secondary details do not undermine the essential answer.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1847,
        "output_tokens": 9490,
        "total_tokens": 11337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1847,
        "output_tokens": 9490,
        "total_tokens": 11337,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8332,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-026-source-follower-drives-common-gate",
      "part": "part1",
      "question_number": 26,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-026-source-follower-drives-common-gate/figure-20.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe topology is a **differential pair with single‑ended input and single‑ended output**:\n\n- M₁ and M₂ share a common source node biased by the ideal tail current source I₁.\n- The input V_in drives M₁'s gate; M₂'s gate is held at a fixed bias V_b (so M₂'s gate is an AC ground).\n- M₁'s drain is tied directly to V_DD (no signal is taken there), and the output is taken at M₂'s drain through R_D.\n\nEquivalently, it can be viewed as a **source follower (M₁) cascaded into a common‑gate stage (M₂)**: M₁ couples v_in to the common source node, and M₂ carries that signal to the output.\n\n## DC operating point\n\n- I_D1 + I_D2 = I₁. If M₁, M₂ are matched and V_b = V_in,DC, the current splits equally: I_D1 = I_D2 = I₁/2.\n- V_out,DC = V_DD − (I₁/2)·R_D.\n- Saturation requires V_out ≥ V_b − V_TH (M₂) and is automatic for M₁ (its drain sits at V_DD).\n\n## Small-signal voltage gain\n\nLet v_x be the common-source node voltage. With V_b at AC ground and an ideal tail source, KCL at the source node gives:\n\ng_m1(v_in − v_x) + g_m2(0 − v_x) = 0  ⇒  v_x = v_in·g_m1/(g_m1+g_m2)\n\nThe signal current in M₂ is i_d2 = −g_m2·v_x, and since this current must flow through R_D:\n\n**A_v = v_out/v_in = + g_m1·g_m2·R_D/(g_m1+g_m2)**\n\nFor matched devices (g_m1 = g_m2 = g_m):\n\n**A_v = + (1/2)·g_m·R_D**  (non-inverting)\n\nIncluding channel-length modulation (ideal tail):\n\nA_v ≈ (g_m/2)·(R_D ‖ 2r_o2) ≈ g_m·(R_D/2 ‖ r_o2)\n\n**Intuition:** because the tail fixes i_d1 + i_d2, the source node follows the input halfway (v_x ≈ v_in/2), so v_gs1 = v_in/2 and only half the transconductance current of a plain common-source stage is generated; M₂ mirrors that current into R_D, producing a *non-inverted* output.\n\n## Input and output resistance\n\n- **R_in = ∞** at low frequency (input is a MOS gate).\n- **R_out = R_D ‖ [r_o2 + (1+g_m2·r_o2)(1/g_m1 ‖ r_o1)] ≈ R_D ‖ 2r_o2**, which reduces to ≈ R_D if r_o is neglected. (The resistance looking into M₂'s drain is boosted to ≈ 2r_o because its source sees only ≈ 1/g_m1.)\n\n## Summary of behavior\n\n| Quantity | Result (matched, r_o neglected) |\n|---|---|\n| Topology | Diff pair, 1-ended in/out (= follower + common-gate) |\n| Gain | +g_m·R_D/2 (non-inverting) |\n| R_in | ∞ |\n| R_out | ≈ R_D (≈ R_D‖2r_o2 with r_o) |\n| Bias | I_D1 = I_D2 = I₁/2, V_out = V_DD − (I₁/2)R_D |\n\nKey takeaways: connecting M₁'s drain to V_DD wastes no bias headroom and simply means the stage is used single-endedly; the price paid versus a full common-source stage is a factor of two in gain (only v_in/2 appears across each gate–source), while the ideal tail current source keeps the bias split stable and makes the gain insensitive to common-mode disturbances.",
        "format": "markdown",
        "sha256": "5e2ed7b46b2b5dc4c67f540d658d9861566907e9d7ebe07845684238e313f29b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source-coupled pair (equivalently, a source follower driving a common-gate stage), with M₂ biased at Vb and output at its drain; the stated gain is correctly non-inverting.",
          "golden_solution_sha256": "5f76b34ca8287a0570c6f002e2eadb7a24e8054bf59e90b39e7d140a788b3c2c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1847,
        "output_tokens": 8450,
        "total_tokens": 10297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1847,
        "output_tokens": 8450,
        "total_tokens": 10297,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7554,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up: what the circuit is\n\nM₁ is a **source follower** (drain at AC ground), and M₂, biased at a constant V_b, is just a **current‑source load** (it contributes r_o2 and its drain capacitance C_DB2 to the output node). The output is taken at the source of M₁, and the gate of M₁ is driven through R_S.\n\nTo find Z_out we kill V_in, so the gate of M₁ is connected to AC ground **through R_S**, and we apply a test voltage v_x at the output (source) node. Keep C_GS of M₁; it connects the output node back to the gate node.\n\n## The impedance looking into the source\n\n**Gate node:** v_x couples to the gate through C_GS, and the gate sees R_S to ground:\n\nv_G = v_x · (s R_S C_GS)/(1 + s R_S C_GS)  ⇒  v_gs = v_G − v_x = −v_x/(1 + s R_S C_GS)\n\n**Test current:** the current into the node is the C_GS current minus the transistor's gm current (which is injected into the source node):\n\ni_x = (v_x − v_G)sC_GS − g_m v_gs = v_x (g_m + sC_GS)/(1 + s R_S C_GS)\n\nTherefore:\n\n**Z_x = v_x/i_x = (1 + s R_S C_GS)/(g_m + s C_GS) = (1/g_m)·(1 + s R_S C_GS)/(1 + s C_GS/g_m)**\n\n(The total output impedance is Z_x ∥ r_o1 ∥ r_o2 ∥ 1/sC_L, where C_L includes C_SB1, C_DB2 and any load capacitance; these don't change the argument.)\n\n## Why this is inductive\n\nLook at the two asymptotes of Z_x:\n\n- **ω → 0:** Z_x = 1/g_m — the familiar low output resistance of a follower. Here a rise in v_x makes v_gs = −v_x, and the g_m current immediately opposes the disturbance.\n- **ω → ∞:** C_GS becomes a short, so v_G ≈ v_x, v_gs ≈ 0. The transistor **stops regulating**; the test current can only flow through C_GS and R_S, so Z_x → R_S.\n\nSo if **R_S > 1/g_m**, the impedance *rises* from 1/g_m to R_S as frequency increases (the zero at ω_z = 1/R_S C_GS lies below the pole at ω_p = g_m/C_GS). An impedance whose magnitude grows with frequency and whose phase is positive (voltage leads current) between ω_z and ω_p is precisely an **inductive** impedance. In fact Z_x can be written exactly as:\n\nZ_x = 1/g_m + [ sL ∥ (R_S − 1/g_m) ],  with **L = (C_GS/g_m)(R_S − 1/g_m) = (R_S − 1/g_m)/ω_T**\n\nAt low frequencies Z_x ≈ 1/g_m + sL, i.e. a resistor in series with an inductor. Both L and the parallel resistor are positive only when R_S > 1/g_m — that is why the output impedance *can* be inductive, not always is. (With R_S = 0, Z_x = 1/(g_m + sC_GS), a plain R∥C — capacitive, not inductive.)\n\n**Physical picture:** the follower's low output resistance comes from local feedback (v_x ↑ → v_gs ↓ → g_m pulls current out of the node). But with R_S in the gate path, the gate voltage can only respond to v_x by charging C_GS through R_S; v_G is a *delayed* replica of v_x. The correcting g_m current therefore arrives late (lag ≈ R_S C_GS). A restoring action that responds with inertia/delay is exactly what an inductance emulates: the branch current cannot follow instantaneous voltage changes. At very high frequency the loop dies out completely (v_gs → 0) and only R_S remains.\n\n## Consequence\n\nThe inductive component of Z_x forms a resonant tank with the capacitance on the output node (C_SB1 + C_DB2 + C_load):\n\nω_res ≈ 1/√(L·C_node)\n\nThis is why a source follower driven through a large gate resistance and loading a capacitor shows peaking and ringing, and can even oscillate if the Q of this tank is high. Conversely, the same effect is deliberately exploited to build **active inductors** (e.g., in RF VCOs and matching networks), where a follower with a resistive gate path substitutes for a physical inductor.\n\nNote that M₂ is not the source of the inductance; it merely supplies the bias current, the parallel resistance r_o2, and part of the node capacitance that completes the resonance. The inductive behavior originates entirely from the R_S–C_GS–g_m interaction of the follower transistor M₁.",
        "format": "markdown",
        "sha256": "b8571a848585f9223ff2c01e6fb9e38b2721011f139270e4e5b2b6ea54c7a150"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the source follower and derives the relevant impedance. It explains that Zout transitions from about 1/gm at low frequency to RS at high frequency as Cgs shorts gate to source, making it inductive when RS > 1/gm. The additional loading and resonance discussion does not contradict the essential result.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1348,
        "output_tokens": 10380,
        "total_tokens": 11728,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1348,
        "output_tokens": 10380,
        "total_tokens": 11728,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9253,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up: what the circuit is\n\nM₁ is a **source follower** whose gate is driven through a resistance R_S; M₂ (gate at fixed V_b) is a current‑source load, so at the output node we see r_O2 in parallel with the node capacitance C_L (drain capacitances, wiring, load). The output impedance is therefore\n\nZ_out = Z_look(into M₁'s source) ∥ r_O2 ∥ (1/sC_L),\n\nand the interesting part is Z_look, which must include C_GS.\n\n## Impedance looking into the source with R_S at the gate\n\nWith V_in = 0, apply a test voltage v_x at the source node. The gate node is connected to ground through R_S and to the source through C_GS, so KCL at the gate gives v_g = v_x·sC_GS R_S/(1+sR_S C_GS), hence\n\nv_gs = v_g − v_x = −v_x/(1+sR_S C_GS).\n\nThe test current is i_x ≈ g_m v_gs·(−1) + (v_x−v_g)sC_GS = v_x (g_m + sC_GS)/(1+sR_S C_GS), so (neglecting r_O and C_GD for clarity):\n\n**Z_look(s) = (1 + sR_S C_GS)/(g_m + sC_GS) = (1/g_m)·(1+s/ω_z)/(1+s/ω_p)**,  ω_z = 1/(R_S C_GS), ω_p = g_m/C_GS.\n\n## Why this is inductive\n\nWhenever R_S > 1/g_m, the zero lies **below** the pole. Then:\n\n- At low frequency (ω ≪ ω_z): C_GS is open, v_gs = −v_x, the follower's feedback is fully active → Z = 1/g_m (resistive).\n- In the mid band (ω_z ≪ ω ≪ ω_p): Z ≈ (1/g_m)·sR_S C_GS = s·(R_S C_GS/g_m) — impedance growing proportionally to jω, i.e. an **inductor L ≈ R_S C_GS/g_m** in series with 1/g_m.\n- At high frequency (ω ≫ ω_p): C_GS shorts gate to source, v_gs → 0, the g_m feedback is disabled → Z → R_S (resistive again).\n\nEquivalently, Z_look can be written exactly as 1/g_m in series with (L ∥ R), with L = (C_GS/g_m)(R_S − 1/g_m) and R = R_S − 1/g_m. Since the magnitude rises with frequency and the phase is positive between ω_z and ω_p, the output impedance is **inductive in that band**. (Including C_GD or r_O only shifts ω_z/ω_p slightly; the conclusion holds.)\n\n## Physical intuition\n\nThe follower's low output resistance 1/g_m comes from local feedback: a perturbation at the source changes v_gs, and the resulting g_m current opposes the perturbation. With R_S in the gate path, the gate voltage coupled through C_GS cannot settle instantly; the R_S–C_GS low-pass filter delays and attenuates v_gs. Thus the effective transconductance rolls off, g_m,eff(s) = g_m/(1+sR_S C_GS), and the \"resistance\" 1/g_m,eff grows with frequency — exactly the behavior of an inductor. In other words, the correcting current *lags* the voltage perturbation, which is the signature of inductance.\n\n## Consequence (and why M₂ matters)\n\nM₂ supplies only the real part r_O2 and the node capacitance C_L. The emulated inductance L ≈ R_S C_GS/g_m forms a resonant tank with C_L at ω₀ ≈ 1/√(LC_L). If this resonance falls inside the inductive band and r_O2 (plus R_S) provides too little damping, Z_out peaks and the stage can ring or even oscillate — the classic instability of followers driven from a high-resistance node. Conversely, the same property lets this circuit be used deliberately as an **active (simulated) inductor** of value ≈ R_S C_GS/g_m.\n\n**Summary:** because R_S and C_GS place a zero (1/R_S C_GS) below the pole (g_m/C_GS) in the impedance looking into M₁'s source, the negative feedback that normally makes the follower's output resistive (1/g_m) weakens with frequency, making Z_out rise like jωL (L ≈ R_S C_GS/g_m) over a mid-frequency band — i.e., inductive.",
        "format": "markdown",
        "sha256": "24d7c01727017e4db09cbb832379aae3ffb3e6b5f5cb6e1782ddb53c777d0569"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly derives the source-looking impedance and explains its transition from about 1/gm at low frequencies to RS at high frequencies as Cgs shorts gate to source. It correctly identifies the inductive rise when RS > 1/gm.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1348,
        "output_tokens": 7681,
        "total_tokens": 9029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1348,
        "output_tokens": 7681,
        "total_tokens": 9029,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-027-explain-why-output-impedance-be-inductive",
      "part": "part1",
      "question_number": 27,
      "question": "Explain why the output impedance of the circuit shown in the figure can be inductive.",
      "figures": [
        "tasks/part1-027-explain-why-output-impedance-be-inductive/figure-21.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up: what the circuit is\n\nM₁ is a **source follower** (common‑drain stage) whose gate is driven through R_S, and M₂ (gate at fixed bias V_b) is a **current‑source load**, contributing only its output resistance r_O2 (plus junction capacitance) in parallel with the output node. The output is taken at the source of M₁.\n\nTo find Z_out we set V_in = 0 and look into the output node. The crucial element is **C_GS1**, which connects the output node back to the gate node, where R_S sits to ground.\n\n## Low frequency: purely resistive\n\nAt DC/low frequency no current flows into the gate, so the gate is an AC ground through R_S. A test voltage v_x at the output produces v_gs = –v_x, and M₁ returns a correcting current g_m1 v_x. Hence\n\nZ_out ≈ (1/g_m1) ∥ r_O1 ∥ r_O2 ≈ 1/g_m1  (resistive).\n\n## Higher frequency: the gate node lags, and Z_out becomes inductive\n\nAs frequency rises, the test signal pushes current through C_GS1 into the gate node, developing a gate voltage. With v_in = 0, the gate node equation is\n\nv_G/R_S + sC_GS1(v_G – v_x) = 0  ⇒  v_G = v_x · sR_SC_GS1/(1 + sR_SC_GS1),\n\nso v_gs = v_G – v_x = –v_x/(1 + sR_SC_GS1). The follower's \"correcting\" transconductance is therefore no longer g_m1 but **g_m1/(1 + sR_SC_GS1)** — the negative feedback that creates the low output resistance now acts with a **time delay τ = R_SC_GS1**. Writing the test current (neglecting r_O's and C_L for clarity), i_x = (g_m1 + sC_GS1)v_x/(1 + sR_SC_GS1), gives\n\nZ_out ≈ (1 + sR_SC_GS1)/(g_m1 + sC_GS1).\n\nTaking the imaginary part: Im{Z_out} = ωC_GS1(g_m1R_S – 1)/|g_m1 + jωC_GS1|², which is **positive whenever g_m1R_S > 1**. In the band 1/(R_SC_GS1) ≪ ω ≪ g_m1/(C_GS1 + C_L),\n\n**Z_out ≈ 1/g_m1 + s·(R_SC_GS1/g_m1) = R + jωL, with L ≈ R_SC_GS1/g_m1.**\n\nA resistor in series with an inductor. (Including the load capacitance C_L at the output node, the condition becomes g_m1R_SC_GS1 > C_GS1 + C_L; if R_S is too small, or at very high frequency where C_GS1 simply shorts gate to source, the node looks capacitive again — the inductive behavior occupies a mid‑frequency band.)\n\n## Physical intuition\n\n- The low output resistance of a follower exists *because* any change of v_out immediately changes v_gs (gate fixed) and M₁ fights it.\n- With R_S present, the gate voltage cannot stay fixed: v_out couples through C_GS1 and drags v_G along, but only after the R_S–C_GS1 time constant. Think of a step applied to v_out: initially v_G jumps with it (v_gs ≈ 0), so M₁ supplies almost no opposing current; only as the gate node relaxes through R_S does v_gs grow to –v_x and the opposing current g_m1v_x build up. **Current that builds up *after* the voltage is applied — current lagging voltage — is exactly the signature of an inductor.** (A resistor responds instantly; a capacitor's current spikes and decays; here the current ramps up.)\n\n## Role of M₂ and why it matters\n\nM₂ only adds r_O2 (and C_DB2) in parallel with the output; it biases M₁ but does not cancel the inductive term generated by the R_S–C_GS1 lag. The practical consequence is important: this **effective inductance L ≈ R_SC_GS1/g_m1 resonates with the capacitance at the output node** (C_L, C_SB1, C_DB2, C_GD2) at ω ≈ 1/√(LC_L), producing peaking, ringing, or even oscillation when a source follower with a resistive gate drive buffers a capacitive load. Conversely, the same effect is sometimes exploited deliberately to realize a small on‑chip active inductor.",
        "format": "markdown",
        "sha256": "c084e067aab13ec6de2b3a3c39ee9fb4ea379d89f6928122507f718eb6b30866"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies the source follower, derives the key impedance expression, and gives the correct inductive condition, g_m1 R_S > 1. However, it incorrectly says the unloaded impedance becomes capacitive at very high frequency; from its own expression it tends to R_S. Its inductance approximation also omits the −1/g_m1 term.",
          "golden_solution_sha256": "8c59f914b88c1f25c100ef0914c7e54f6c3e86c55b273ac88a1c45724902d303",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1348,
        "output_tokens": 9233,
        "total_tokens": 10581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1348,
        "output_tokens": 9233,
        "total_tokens": 10581,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8201,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit Topology\n\n- **M₁** is a common‑source stage: its gate is node *X*, its drain is the output node (loaded by R_D1 to V_DD).\n- **M₂** closes a loop around M₁: its **gate is tied to V_out**, its **drain to node X**, its source to ground. It therefore *senses the output voltage* and *returns a current* to the input node → a **shunt–shunt (transresistance) feedback structure**, driven by the shunt current source I_in.\n- Node *X* is a current‑summing node: since the gate of M₁ draws no current, **all of I_in must flow into the drain of M₂**.\n\n## DC (bias) relations\n\nI_D2 = I_in ⇒ V_out = V_TH2 + √(2I_in/(μ_nC_ox(W/L)₂))  (M₂'s gate voltage *is* V_out)\nI_D1 = (V_DD − V_out)/R_D1 ⇒ V_X = V_TH1 + √(2I_D1/(μ_nC_ox(W/L)₁))\n\n## Small‑signal analysis (λ = 0)\n\n**Node X:** i_in = i_D2 = g_m2·v_out  ⇒ **v_out/i_in = 1/g_m2**\n**Node V_out:** v_out = −g_m1·R_D1·v_x  ⇒ v_x = −i_in/(g_m1·g_m2·R_D1)\n\nKey results:\n\n| Quantity | Value (λ = 0) |\n|---|---|\n| Transresistance v_out/i_in | **1/g_m2** (independent of R_D1) |\n| Input resistance v_x/i_in | **−1/(g_m1 g_m2 R_D1)** (small, *negative*) |\n| Output resistance | **≈ 0** (output node forced by M₂'s gate‑control) |\n\n## Feedback polarity and the role of r_o\n\nTracing the loop: v_X ↑ → v_out ↓ (M₁ inverts) → v_GS2 ↓ → i_D2 ↓ → less current pulled from X → v_X ↑. The loop is therefore **positive (regenerative)**. With finite output resistances the return ratio is\n\nT = g_m1·g_m2·r_o2·(R_D1‖r_o1),\n\nand the exact transresistance is\n\nv_out/i_in = 1 / [ g_m2 − (1/R_D1 + 1/r_o1)/(g_m1·r_o2) ].\n\nBecause the loop closure occurs only through r_o2 and R_D1, the correction term is normally tiny, so v_out/i_in ≈ 1/g_m2. Note, however, that since the feedback is positive, if T > 1 the equilibrium is a saddle point (negative input and output resistances are the signature of this): the circuit is regenerative and will latch unless the loop gain is kept below unity. In the idealized λ = 0 treatment the loop is \"broken\" (i_D2 is independent of v_X), and the circuit behaves as a well‑defined **current‑to‑voltage converter (transresistance amplifier) with gain 1/g_m2**, set solely by the feedback transistor M₂.\n\n## Summary\n\nThe circuit is a shunt–shunt feedback transresistance stage: M₂ senses V_out and forces its drain current to equal I_in at node X, giving V_out/I_in ≈ 1/g_m2, a very low (formally negative) input resistance at X, and a low output resistance — with the caveat that the returned feedback is positive, so the loop gain g_m1 g_m2 r_o2 (R_D1‖r_o1) must remain < 1 for stable linear operation.",
        "format": "markdown",
        "sha256": "b57acb92f3dba4dcccf00d2f25b8e0f58b41d03ff26a8665193d3a14b3ca2f42"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₂’s gate as tied to Vout, traces the positive-feedback loop, and states the negative input resistance and latching/instability consequence, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1699,
        "output_tokens": 17324,
        "total_tokens": 19023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1699,
        "output_tokens": 17324,
        "total_tokens": 19023,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16484,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n**Connections:**\n- *I*<sub>in</sub> injects current into node *X*.\n- Node *X* = gate of M₁ **and** drain of M₂.\n- M₁: source grounded, drain at the output node; R<sub>D1</sub> is its load to V<sub>DD</sub> → common‑source stage (input = *X*, output = V<sub>out</sub>).\n- M₂: source grounded, gate tied to V<sub>out</sub> → common‑source device that **senses the output voltage** and **returns a current to the input node X**.\n\nSo this is a **shunt–shunt (voltage‑sensed, current‑returned) feedback loop around a CS stage → a current‑to‑voltage (transresistance) converter**, with input *I*<sub>in</sub> and output *V*<sub>out</sub>.\n\n## 2. Large‑signal (bias) behavior\n\nNode *X* has only two DC paths: the current source and M₂'s drain (M₁'s gate draws no current). Hence\n\n**I<sub>D2</sub> = I<sub>in</sub>** ⇒ V<sub>out</sub> = V<sub>GS2</sub> = V<sub>TH2</sub> + √(2I<sub>in</sub>/(μₙC<sub>ox</sub>(W/L)₂))\n\nand M₁/R<sub>D1</sub> then set node X: I<sub>D1</sub> = (V<sub>DD</sub> – V<sub>out</sub>)/R<sub>D1</sub>, V<sub>X</sub> = V<sub>GS1</sub> = V<sub>TH1</sub> + √(2I<sub>D1</sub>/(μₙC<sub>ox</sub>(W/L)₁)). (Validity: V<sub>X</sub> ≥ V<sub>out</sub> – V<sub>TH2</sub>, V<sub>out</sub> ≥ V<sub>X</sub> – V<sub>TH1</sub>.)\n\n## 3. Small‑signal analysis\n\nNode X:  i<sub>in</sub> = g<sub>m2</sub>v<sub>out</sub> + v<sub>x</sub>/r<sub>o2</sub>\nNode out:  g<sub>m1</sub>v<sub>x</sub> + v<sub>out</sub>/r<sub>o1</sub> + v<sub>out</sub>/R<sub>D1</sub> = 0 ⇒ v<sub>x</sub> = –v<sub>out</sub>/[g<sub>m1</sub>(R<sub>D1</sub>‖r<sub>o1</sub>)]\n\nSolving:\n\n**V<sub>out</sub>/I<sub>in</sub> = 1 / [ g<sub>m2</sub> – 1/(g<sub>m1</sub>r<sub>o2</sub>(R<sub>D1</sub>‖r<sub>o1</sub>)) ] = g<sub>m1</sub>r<sub>o2</sub>(R<sub>D1</sub>‖r<sub>o1</sub>) / (T – 1)**\n\nwith loop gain **T = g<sub>m1</sub>g<sub>m2</sub>r<sub>o2</sub>(R<sub>D1</sub>‖r<sub>o1</sub>)**. Likewise:\n\n- R<sub>in</sub> (at X) = r<sub>o2</sub>/(1 – T)\n- R<sub>out</sub> = (R<sub>D1</sub>‖r<sub>o1</sub>)/(1 – T)\n\nIdeal transistors (r<sub>o</sub> → ∞): **V<sub>out</sub>/I<sub>in</sub> = 1/g<sub>m2</sub>** — consistent with the big‑picture result I<sub>D2</sub> = I<sub>in</sub>.\n\n## 4. Feedback polarity and stability (the key point)\n\nBreaking the loop at M₂'s gate: v<sub>x</sub> → (–g<sub>m1</sub>(R<sub>D1</sub>‖r<sub>o1</sub>)) → v<sub>out</sub> → (–g<sub>m2</sub>r<sub>o2</sub>) → v<sub>x</sub>. Two inversions ⇒ **the loop is positive (regenerative) feedback**; indeed every quantity is the open‑loop value multiplied by 1/(1 – T) (open‑loop: R<sub>M</sub> = –g<sub>m1</sub>r<sub>o2</sub>(R<sub>D1</sub>‖r<sub>o1</sub>), R<sub>in</sub> = r<sub>o2</sub>, R<sub>out</sub> = R<sub>D1</sub>‖r<sub>o1</sub>).\n\nConsequences:\n- **T < 1:** stable regenerative transresistance amp; gain = –g<sub>m1</sub>r<sub>o2</sub>(R<sub>D1</sub>‖r<sub>o1</sub>)/(1–T), impedances boosted by 1/(1–T).\n- **T → 1:** gain and impedances → ∞ (latch threshold).\n- **T > 1** (typical, since g<sub>m</sub>r<sub>o</sub> ≫ 1): the saturation operating point is unstable; the circuit latches (M₁ cuts off, M₂ triode, V<sub>out</sub> → V<sub>DD</sub>). The formal limit T ≫ 1 of the gain expression, |V<sub>out</sub>/I<sub>in</sub>| → 1/g<sub>m2</sub>, merely reflects the constraint I<sub>D2</sub> = I<sub>in</sub>.\n\n## 5. Summary\n\n| Quantity | Result |\n|---|---|\n| Function | Shunt–shunt feedback, current→voltage converter |\n| Bias constraint | I<sub>D2</sub> = I<sub>in</sub>, V<sub>out</sub> = V<sub>GS2</sub>(I<sub>in</sub>) |\n| Loop gain | T = g<sub>m1</sub>g<sub>m2</sub>r<sub>o2</sub>(R<sub>D1</sub>‖r<sub>o1</sub>), **positive feedback** |\n| V<sub>out</sub>/I<sub>in</sub> | g<sub>m1</sub>r<sub>o2</sub>(R<sub>D1</sub>‖r<sub>o1</sub>)/(T–1) ≈ 1/g<sub>m2</sub> (ideal) |\n| R<sub>in</sub>, R<sub>out</sub> | r<sub>o2</sub>/(1–T), (R<sub>D1</sub>‖r<sub>o1</sub>)/(1–T) |\n| Stability | Requires T < 1; otherwise the circuit latches |\n\nIn short: M₂ closes a **positive‑feedback**, shunt–shunt loop around the M₁/R<sub>D1</sub> CS stage; it forces M₂'s drain current to equal I<sub>in</sub>, giving an ideal transresistance of 1/g<sub>m2</sub>, but the regenerative loop makes the circuit usable only if the loop gain is kept below unity (otherwise it behaves as a latch/negative‑resistance circuit).",
        "format": "markdown",
        "sha256": "0338c87afa57aa773e1c5a927c37bf3c83f0e74262e1bef75a5c9007d14d4809"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies that M2’s gate is tied to Vout, not diode-connected, and explains the positive-feedback loop and its instability/latching consequence, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1699,
        "output_tokens": 18078,
        "total_tokens": 19777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1699,
        "output_tokens": 18078,
        "total_tokens": 19777,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16264,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-028-current-input-positive-feedback",
      "part": "part1",
      "question_number": 28,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-028-current-input-positive-feedback/figure-22.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit structure\n\n- **M₁** is a common‑source stage: gate = node *X*, source = ground, drain = output node, loaded by **R_D1** to V_DD. The output voltage V_out is taken at its drain.\n- **M₂** is the feedback device: its **gate senses V_out** (connected directly to the output node) and its **drain returns a current to node X**, i.e. to the node where the input current I_in is injected. Its source is grounded.\n- The input is a **current** (I_in into node X), the output is a **voltage** (V_out).\n\nSo M₂ performs **shunt (voltage) sampling at the output** and **shunt (current) mixing at the input**: this is a *shunt–shunt* (transresistance‑amplifier) structure, with feedback factor β = g_m2 (a transconductance, A/V).\n\n## Feedback polarity (important!)\n\nFollow a perturbation around the loop:\n\nV_out ↑ → V_GS2 ↑ → I_D2 ↑ → more current pulled *out* of node X → V_X ↓ (I_in is fixed) → I_D1 ↓ → V_out ↑↑\n\nThe perturbation reinforces itself: **the loop contains only one inversion (M₁), so the feedback is positive (regenerative), not negative.** Breaking the loop at M₂'s gate confirms this:\n\nT = g_m1·g_m2·r_O2·(R_D1 ‖ r_O1) > 0 (returned signal in phase ⇒ positive feedback)\n\n## Small‑signal solution\n\nKCL at X: i_in = g_m2·v_out + v_x/r_O2\nKCL at output: g_m1·v_x + v_out(1/r_O1 + 1/R_D1) = 0\n\nSolving:\n\n- **Transresistance gain:** v_out/i_in = 1 / [ g_m2 − (1/r_O1 + 1/R_D1)/(g_m1·r_O2) ] ≈ **1/g_m2** (ideal r_O → ∞)\n- **Loop gain:** T = g_m1 g_m2 r_O2 (R_D1‖r_O1), and the desensitivity factor is (1 − T), which is *negative* since T > 1.\n- **Input resistance at X:** R_in = r_O2/(1 − T) ≈ −1/(g_m1 g_m2 (R_D1‖r_O1)) → **negative**\n- **Output resistance:** R_out = (R_D1‖r_O1)/(1 − T) → **negative**\n\n## Interpretation\n\n- Formally, the circuit behaves as a **current‑to‑voltage converter with gain ≈ 1/g_m2**: at DC the entire input current must flow through M₂ (gate currents are zero), which forces V_GS2 ≈ I_in/g_m2, hence V_out ≈ I_in/g_m2. The bias point is I_D2 = I_in, V_out = V_GS2(I_in), I_D1 = (V_DD − V_out)/R_D1, V_X = V_GS1(I_D1).\n- However, because the feedback is **positive with |T| ≫ 1**, the negative input/output resistances indicate this equilibrium is **unstable**: any disturbance drives the circuit into latch‑up (V_X rails high, V_out → low, M₂ off), i.e. the circuit acts as a bistable latch rather than a stable amplifier.\n- For a usable shunt–shunt feedback amplifier the returned current must oppose the input current (negative feedback), e.g. replacing M₂ by a resistor R_F from output to node X (the classic transresistance amplifier), which exploits the inversion of M₁; then the gain ≈ −R_F/(1 + 1/loop gain) with both input and output impedances lowered by (1 + T).\n\n**Summary:** the circuit is a shunt–shunt (transresistance) feedback loop around a common‑source stage, with idealized gain V_out/I_in ≈ 1/g_m2, but as drawn the feedback polarity is positive (T = g_m1 g_m2 r_O2(R_D1‖r_O1) > 1), giving negative input/output resistance and an unstable (latching) operating point.",
        "format": "markdown",
        "sha256": "3a7817420122c0149defe6fe10925704c32fa9a3cfbaf416a32c6ccf6cb11b6e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₂’s gate connection to Vout, the positive-feedback loop, and its negative input resistance and unstable/latching behavior, satisfying the full-credit rule.",
          "golden_solution_sha256": "966942e01d767dcc8afc948021623863d816cf7567c0ad0be0b855267f6da7e8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1699,
        "output_tokens": 15971,
        "total_tokens": 17670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1699,
        "output_tokens": 15971,
        "total_tokens": 17670,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 15018,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Recognizing the structure\n\n**Core amplifier (two stages):**\n- **M₁** has its gate at the fixed bias $V_b$ (AC ground) and receives the signal at its **source** → **common‑gate (CG)** stage. Its load is $R_{D1}$ (node X).\n- **M₂** has its source grounded and its gate at node X → **common‑source (CS)** stage. Its load is $R_{D2}$ (output node).\n- Stage gains: CG is non‑inverting ($V_X/V_S = +g_{m1}R_{D1}$), CS is inverting ($V_{out}/V_X = -g_{m2}R_{D2}$). Overall the core is **inverting** from the input node to the output node.\n\n**Feedback network:** $R_F$ connects the output node directly back to the input node.\n- At the **output** it taps the output *voltage* (shunt/parallel sampling).\n- At the **input** it returns a *current* $i_{RF}$ that sums with $I_{in}$ at the input node (shunt/parallel mixing).\n\n⇒ **Shunt–shunt (parallel–parallel) feedback**, i.e. a **transimpedance amplifier** (current‑in, voltage‑out), the classic photodiode/front‑end TIA topology.\n\n**Polarity check:** $I_{in}\\uparrow \\Rightarrow V_S\\uparrow \\Rightarrow V_X\\uparrow \\Rightarrow V_{out}\\downarrow \\Rightarrow$ more current is pulled *out* of the input node through $R_F$, opposing the rise of $V_S$ → **negative feedback**. ✔\n\n## 2. Exact small‑signal solution (neglect $r_o$, body effect)\n\nNode equations ($V_S$ = input node, $V_X$, $V_{out}$):\n\n- Input node: $I_{in} = g_{m1}V_S + (V_S - V_{out})/R_F$\n- Node X: $V_X = g_{m1}R_{D1}V_S$\n- Output node: $V_{out}/R_{D2} + (V_{out}-V_S)/R_F + g_{m2}V_X = 0$\n\nSolving, with $A = g_{m1}g_{m2}R_{D1}R_{D2}$ and $a = R_{D2}/R_F$:\n\n$$\\frac{V_{out}}{I_{in}} = \\frac{-R_F\\,(A - a)}{1 + A + g_{m1}R_F(1+a)},\\qquad\nR_{in} = \\frac{R_F + R_{D2}}{1 + A + g_{m1}R_F(1+a)}$$\n\n$$R_{out} = \\frac{R_{D2}(1+g_{m1}R_F)}{1+g_{m1}R_F + g_{m1}R_{D2}(1+g_{m2}R_{D1})}$$\n\n## 3. Feedback‑theory interpretation (insight)\n\nUsing the shunt–shunt loading rules ($R_F$ placed in parallel at both ports):\n\n- **Open‑loop input resistance:** $R_{i,open} = R_F \\parallel \\tfrac{1}{g_{m1}}$\n- **Open‑loop output resistance:** $R_{o,open} = R_D \\!_2 \\parallel R_F$\n- **Open‑loop transresistance:** $R_0 = -\\left(R_F \\parallel \\tfrac{1}{g_{m1}}\\right) g_{m1}R_{D1}\\, g_{m2}\\,(R_{D2}\\parallel R_F)$\n- **Feedback factor:** $\\beta = i_{RF}/V_{out} = 1/R_F$ (units A/V)\n- **Loop gain:** $T = \\beta |R_0| = \\dfrac{g_{m1}g_{m2}R_{D1}(R_{D2}\\parallel R_F)}{1+g_{m1}R_F}$\n\nClosed loop (desensitivity factor $1+T$):\n\n$$R_T = \\frac{V_{out}}{I_{in}} = \\frac{R_0}{1+T},\\qquad R_{in,cl} = \\frac{R_{i,open}}{1+T},\\qquad R_{out,cl} = \\frac{R_{o,open}}{1+T}$$\n\n**Deep‑feedback limit ($T \\gg 1$):**\n\n$$\\frac{V_{out}}{I_{in}} \\approx -R_F,\\qquad R_{in,cl} \\approx \\frac{1}{g_{m1}T}\\ (\\text{very small}),\\qquad R_{out,cl} \\approx \\frac{R_{D2}\\parallel R_F}{T}\\ (\\text{very small})$$\n\n## 4. Design interpretation\n\n- **Why shunt–shunt is correct here:** the source is a *current* (infinite source resistance), so current mixing at a low‑impedance input node is ideal; the output is a *voltage*, so low output impedance is ideal. Feedback delivers both.\n- **Gain set by a passive:** $V_{out}/I_{in} \\approx -R_F$, insensitive to $g_m$'s and $R_D$'s; bandwidth is extended by ≈ $(1+T)$ compared with the open‑loop poles at node X and the output node.\n- **DC biasing:** $R_F$ also closes the DC loop: $I_{D1} \\approx I_{in} + (V_{out}-V_S)/R_F$, $V_S \\approx V_b - V_{TH1}$, $V_X = V_{DD} - I_{D1}R_{D1}$, $V_{out} = V_{DD} - I_{D2}R_{D2}$; $V_b$ and $R_{D1}, R_{D2}$ must keep both devices in saturation ($V_X > V_S - V_{TH}$… i.e. $V_{DS1}, V_{DS2} \\ge V_{OV}$). Feedback stabilizes this operating point.\n- **Refinements:** including $r_{o1}, r_{o2}$ replaces $R_{D1} \\to R_{D1}\\parallel R_{out,CG1}$ and $R_{D2} \\to R_{D2}\\parallel r_{o2}$, slightly reducing $T$; the exact expressions in §2 already include the (usually negligible) feed‑forward term through $R_F$ (the \"$a$\" terms).\n\n**Bottom line:** this is a shunt–shunt‑feedback transimpedance amplifier (CG + CS core); its closed‑loop gain is $V_{out}/I_{in} \\approx -R_F$ with input and output resistances lowered by the loop gain $1+T$, exactly what a current‑input/voltage‑output interface requires.",
        "format": "markdown",
        "sha256": "fc7bca553cdfca79620bc1e0247ae0d68aa6edc52bc5c364914f9d3240880e17"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M₁ as the common-gate input device, M₂ as the common-source stage driven by X, and R_F as feedback from the output to the input, forming a transimpedance amplifier. It also correctly describes the feedback as negative; the full-credit rule is satisfied.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1920,
        "output_tokens": 12119,
        "total_tokens": 14039,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1920,
        "output_tokens": 12119,
        "total_tokens": 14039,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10542,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Recognizing the structure\n\n- **M₁** (gate held at the fixed bias $V_b$) is a **common‑gate** stage: the input current $I_{in}$ is injected into its source node (call it node S, voltage $v_S$).\n- **M₂** is a **common‑source** stage: its gate is driven by node X (drain of M₁, loaded by $R_{D1}$), and its drain drives $V_{out}$ through $R_{D2}$.\n- **$R_F$** connects the output node back to the input node S. It is tied **in parallel (shunt) with the output node** → it *samples the output voltage*; it is tied **in parallel (shunt) with the input node** → it *returns a current* $i_{RF}$ that mixes with $I_{in}$.\n\n⇒ **Shunt–shunt (parallel–parallel) feedback**, i.e. voltage‑sampling/current‑mixing (\"voltage–current feedback\" in Razavi's terminology). The circuit is a **transimpedance amplifier (current‑to‑voltage converter)**: ideally $V_{out}/I_{in} = $ const, with **low input and low output impedance**.\n\n## 2. Polarity check (negative feedback)\n\n$I_{in}\\uparrow \\Rightarrow v_S\\uparrow \\Rightarrow v_X = +g_{m1}R_{D1}v_S\\uparrow$ (CG, non‑inverting) $\\Rightarrow v_{out} = -g_{m2}(R_{D2}\\|R_F)v_X\\downarrow$ (CS, inverting). The falling $v_{out}$ pulls current from node S through $R_F$ toward the output, so the current entering M₁'s source, $g_{m1}v_S = I_{in}+i_{RF}$, is reduced → **negative feedback**. ✔\n\n## 3. Open‑loop (\"A\") circuit (load $R_F$ on both ports, neglect feed‑forward and $r_o$)\n\n- Input node: $R_{in,open} = R_F \\| \\tfrac{1}{g_{m1}}$ (CG input resistance), so $v_S = I_{in}(R_F\\|\\tfrac1{g_{m1}})$\n- Middle: $v_X = g_{m1}R_{D1}v_S$\n- Output: $v_{out} = -g_{m2}(R_{D2}\\|R_F)v_X$, $R_{out,open} = R_{D2}\\|R_F$\n\n$$R_0 \\equiv \\frac{v_{out}}{I_{in}} = -\\,g_{m1}g_{m2}R_{D1}\\,(R_{D2}\\|R_F)\\,\\frac{R_F}{1+g_{m1}R_F}$$\n\n## 4. Loop gain\n\nThe feedback network returns $i_{RF}\\approx v_{out}/R_F$, so $K = 1/R_F$ and\n\n$$T = -\\frac{R_0}{R_F} = \\frac{g_{m1}g_{m2}R_{D1}(R_{D2}\\|R_F)}{1+g_{m1}R_F}\\qquad(\\text{i.e. } R_0 = -T R_F)$$\n\n## 5. Closed‑loop results (shunt–shunt ⇒ both impedances divided by $1+T$)\n\n$$\\boxed{\\frac{V_{out}}{I_{in}} = \\frac{R_0}{1+T} = -R_F\\,\\frac{T}{1+T} \\;\\xrightarrow{T\\gg1}\\; -R_F}$$\n\n$$R_{in} = \\frac{R_F\\|\\tfrac{1}{g_{m1}}}{1+T}\\;\\;(\\text{very small, ideal for a current input}),\\qquad\nR_{out} = \\frac{R_{D2}\\|R_F}{1+T}\\;\\;(\\text{very small, ideal for a voltage output})$$\n\n**Ideal limit intuition:** deep feedback forces $v_S \\to 0$ (virtual ground at the input node); then essentially all of $I_{in}$ is steered through $R_F$ into the output node ($i_{RF} \\approx -I_{in}$), giving $V_{out} \\approx -I_{in}R_F$ — the gain is set by the passive resistor $R_F$ alone, hence accurate and stable. Bandwidth is likewise extended by $(1+T)$.\n\n## 6. Exact node solution (verification)\n\nWith $G = g_{m1}g_{m2}R_{D1}$, KCL at nodes S, X, Out gives\n\n$$\\frac{V_{out}}{I_{in}} = \\frac{R_F R_{D2}(1-G R_F)}{(R_{D2}+R_F)(1+g_{m1}R_F) - R_{D2}(1-G R_F)} \\approx \\frac{-R_F}{1+\\dfrac{(1+g_{m1}R_F)(R_{D2}+R_F)}{G\\,R_{D2}R_F}}$$\n\nwhich is exactly $R_0/(1+T)$ plus a negligible feed‑forward term $-1/(GR_F)$ — confirming the feedback analysis.\n\n## 7. Bias remarks\n\n$V_b$ fixes M₁'s gate; the DC path through $R_F$ also closes a DC feedback loop that stabilizes the operating points: $V_X = V_{DD}-I_{D1}R_{D1}$ biases M₂'s gate, and $V_{out,DC} = V_{DD}-I_{D2}R_{D2}$.\n\n**Summary:** two‑stage CG+CS amplifier with shunt–shunt (voltage‑sampling, current‑mixing) negative feedback through $R_F$ → a transimpedance amplifier with gain $\\approx -R_F$, and input/output resistances lowered by $(1+T)$, making it an ideal current‑input, voltage‑output interface (e.g., photodiode/readout front end).",
        "format": "markdown",
        "sha256": "1b678405a937ad915bf146be5ef89d675c5fbda8864d3e894b05bb347d67d345"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier. This satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1920,
        "output_tokens": 12451,
        "total_tokens": 14371,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1920,
        "output_tokens": 12451,
        "total_tokens": 14371,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11073,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-029-feedback-transimpedance-amplifier",
      "part": "part1",
      "question_number": 29,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-029-feedback-transimpedance-amplifier/figure-23.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit description (what each element does)\n\n- **M₁** is a **common‑gate (CG) stage**: the input current I_in is injected into its source; its gate is held at the fixed bias V_b (an AC ground). Its drain load is R_D1, so node X sees v_X = +g_m1 R_D1·v_in (non‑inverting).\n- **M₂** is a **common‑source (CS) stage**: it amplifies v_X and delivers v_out = −g_m2 v_X·(load) (inverting). R_D2 is its drain load.\n- **R_F** connects the output node back to the input node (source of M₁): it is the **feedback network**.\n- The signal chain CG → CS gives a net **inverting** voltage gain from the input node to the output node, so the current returned through R_F opposes disturbances at the input node → **negative feedback** (as confirmed below).\n\n## Feedback topology\n\n- At the **output**, R_F ties directly to the V_out node → it **samples the output voltage** (shunt/shunt sensing).\n- At the **input**, R_F returns a **current** that sums with I_in at the low‑impedance input node (shunt/shunt mixing).\n\n⇒ **Shunt–shunt (voltage–current) feedback**: the circuit is a **transimpedance amplifier (current‑in, voltage‑out)**. Consistently, feedback *lowers* both input and output impedances, which is exactly what a good I→V converter wants.\n\n## Loop gain (load R_F at both ports, neglect feed‑forward through R_F; λ = γ = 0)\n\n- Open‑loop input resistance: R_in,open = (1/g_m1) ∥ R_F, so v_in = i_in·R_in,open\n- Forward path: v_X = g_m1 R_D1 v_in; v_out = −g_m2 v_X·(R_D2 ∥ R_F)\n\n$$A = \\frac{v_{out}}{i_{in}} = -\\frac{g_{m1}R_F}{1+g_{m1}R_F}\\; g_{m2}R_{D1}\\,(R_{D2}\\parallel R_F)$$\n\n- Feedback factor (returned current per output voltage): K = 1/R_F, hence\n\n$$T = |A|K = \\frac{g_{m2}R_{D1}\\,(R_{D2}\\parallel R_F)}{R_F + 1/g_{m1}}$$\n\n## Closed‑loop results\n\n- **Transimpedance gain:**\n\n$$\\frac{v_{out}}{i_{in}} = \\frac{A}{1+T} \\;\\xrightarrow{\\;T\\gg1\\;}\\; -R_F$$\n\n- **Input resistance:** R_in = [(1/g_m1) ∥ R_F]/(1+T) → very small (ideal current input).\n- **Output resistance:** R_out = (R_D2 ∥ R_F)/(1+T) → very small (ideal voltage output).\n\n(Exact node analysis, keeping feed‑forward through R_F, gives v_out/i_in = P(1−G·R_F)/[1+g_m1R_F+P·G−P/R_F], with P = R_D2∥R_F and G = g_m1 g_m2 R_D1, which reduces to the expressions above.)\n\n## Physical intuition\n\nNegative feedback forces the input node (source of M₁) to a **virtual ground**. Since v_in ≈ 0, M₁ carries almost no signal current, and essentially all of i_in is steered through R_F. The feedback loop then drives the output to v_out ≈ −i_in·R_F so that the R_F current exactly absorbs i_in — precisely the operation of a transimpedance (current‑to‑voltage) amplifier, with the two transistor stages supplying the loop gain that makes the virtual ground accurate.\n\n**Summary:** two‑stage CG+CS amplifier with resistive shunt–shunt feedback ⇒ a transimpedance amplifier with gain ≈ −R_F, loop gain T = g_m2 R_D1(R_D2∥R_F)/(R_F+1/g_m1), and both input and output impedances reduced by (1+T).",
        "format": "markdown",
        "sha256": "7cd4a04e95f51a7a29b58a62fe0ccee19490a0388caa47ca3332819b4c93fbc4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate input device, M2 as the common-source stage driven by X, and RF as negative feedback from the output to the input, forming a transimpedance amplifier. The detailed quantitative claims are not needed for full credit under the stated rule.",
          "golden_solution_sha256": "3de185b163e9067ba58585d0a347eecc50f9da3dc36d0d1a8e05a54adcc11752",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1920,
        "output_tokens": 13699,
        "total_tokens": 15619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1920,
        "output_tokens": 13699,
        "total_tokens": 15619,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12747,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Topology identification\n\n- **M₁** (NMOS, gate at fixed bias *V_b*): a **common‑gate** device. Its source sits at the input node *X* (where *I_in* is injected), its drain is the output node *V_out*.\n- **M₂** (PMOS, source at *V_DD*, gate tied to *V_out*, drain at node *X*): a **common‑source** device that *senses the output voltage* and *returns a current into the input node*. It is therefore the **feedback element**.\n- **I₁**: ideal current source loading the output node (it forces *I_D1 = I₁*).\n- **Unlabelled sink at node X** (call it *I_B*): bias current that sets the operating point of node X together with *I_in*.\n\nSince M₂ samples the output **voltage** (shunt connection at the output) and feeds back a **current** into the input node (shut connection at the input), this is a **shunt–shunt (transresistance) feedback amplifier**: a current‑in → voltage‑out converter with very low input and output impedances.\n\n## 2. DC operating point\n\nKCL at *V_out*: I_D1 = I₁ (fixed by the ideal source I₁).\nKCL at node X: I_in + I_D2 + I_D1 = I_B ⇒ **I_D2 = I_B − I₁ − I_in**.\n\nThus V_X ≈ V_b − V_GS1(I₁), and V_out = V_DD − V_SG2(I_D2): the feedback transistor M₂ absorbs whatever DC current the input delivers, which stabilizes the bias point.\n\n## 3. Small‑signal analysis (ideal current sources)\n\nUnknowns: v_x, v_out. M₁: gate ac‑grounded; M₂: source ac‑grounded (V_DD), gate = v_out.\n\n**Output node:** only I₁ (ac open) and M₁'s drain connect here ⇒ i_D1 = 0:\n\n−(g_m1+g_mb1)v_x + (v_out − v_x)/r_O1 = 0 ⇒ **v_out = v_x[1 + (g_m1+g_mb1)r_O1]**\n\n**Node X:** i_in + i_SD2 + i_D1 = 0 with i_SD2 = −g_m2·v_out − v_x/r_O2:\n\ni_in = g_m2·v_out + v_x/r_O2\n\n**Results:**\n\n- **Transresistance gain:**\n V_out/I_in = 1 / [ g_m2 + 1/{r_O2(1+(g_m1+g_mb1)r_O1)} ] ≈ **1/g_m2**\n- **Input resistance (at node X):**\n R_in = v_x/I_in = (V_out/I_in)/[1+(g_m1+g_mb1)r_O1] ≈ **1/(g_m1 g_m2 r_O1)** (very low – ideal for a current input)\n- **Output resistance (at V_out):**\n R_out = 1/[g_m2 + (1/r_O1 − g_m2)/(r_O2·G)], G = (g_m1+g_mb1)+1/r_O1+1/r_O2 ⇒ R_out ≈ **(1/g_m2) ∥ (g_m1 r_O1 r_O2) ≈ 1/g_m2** (low – good voltage output)\n\n## 4. Feedback interpretation / intuition\n\nInject i_in → v_x rises → M₁'s V_GS falls → M₁ pulls less current from V_out → since I₁ is constant, v_out rises → M₂'s V_SG falls → M₂ injects less current into X → v_x is pulled back: **negative feedback**. The loop gain read from the exact solution is 1+T = 1 + g_m2 r_O2[1+(g_m1+g_mb1)r_O1] ≈ g_m1 g_m2 r_O1 r_O2 (product of the two intrinsic gains), which is why both R_in and R_out are crushed by feedback and the closed‑loop gain depends only on the feedback element: **V_out/I_in ≈ 1/g_m2**.\n\n## 5. Summary\n\n| Quantity | Value (approx.) |\n|---|---|\n| Function | Shunt–shunt feedback transresistance stage (I→V converter / low‑Z current buffer) |\n| V_out/I_in | ≈ 1/g_m2 |\n| R_in (node X) | ≈ 1/(g_m1 g_m2 r_O1) |\n| R_out (V_out) | ≈ 1/g_m2 |\n| Bias | I_D1 = I₁, I_D2 = I_B − I₁ − I_in |\n\nIn short: M₁ (common‑gate, cascode‑like) buffers the input current to the output, while M₂ closes a strong negative feedback loop around it, yielding a well‑defined transresistance gain ≈ 1/g_m2 with very low input and output impedances.",
        "format": "markdown",
        "sha256": "6f48d50ed954226d9a8f28684d40e44ca2a6ecc2c4b584989b9f9d3f7b87a598"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout, describes the feedback path, and gives the very low input resistance and approximate transresistance and output resistance of 1/gm2.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 14755,
        "total_tokens": 16544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 14755,
        "total_tokens": 16544,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13634,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. Reading the circuit\n\n- **M₁** (NMOS, gate at fixed bias V_b): source connected to the input node (call it node X, where I_in is injected), drain connected to V_out → a **common‑gate (common‑base‑type) device** between X and V_out.\n- **M₂** (PMOS, source at V_DD): gate connected to V_out, drain connected to node X → a **common‑source amplifier that senses V_out and drives node X**, i.e. the feedback element.\n- **I₁** (ideal current source V_DD→V_out): biases M₁ (I_D1 = I₁) and is an ac open circuit.\n- **I_in** and the unlabeled bias sink at node X: set the dc operating point (I_D2 = I_B − I_in − I₁) and provide the ac input current.\n- Output taken at V_out.\n\nSo the structure is a **regulated‑cascode / active‑feedback stage used as a current‑in, voltage‑out (transresistance) amplifier**, with shunt–shunt feedback: M₂ samples V_out (voltage) and returns a current to the input node X.\n\n## 2. Small‑signal analysis (λ ≠ 0, body effect neglected)\n\nUnknowns: v_X, v_out; input i_in into node X.\n\n**Node V_out:** only M₁'s drain, M₂'s gate and the ideal source I₁ connect here ⇒ the ac drain current of M₁ must be zero:\n i_d1 = −g_m1 v_X + (v_out − v_X)/r_o1 = 0 ⇒ **v_out = v_X (1 + g_m1 r_o1)**.\n\n**Node X:** i_in + i_d1 − i_d2 = 0, with i_d2 = g_m2 v_out + v_X/r_o2. Using i_d1 = 0:\n i_in = g_m2 v_out + v_X/r_o2.\n\n## 3. Results\n\n**Transresistance gain:**\n\n v_out / i_in = 1 / [ g_m2 + 1/((1+g_m1 r_o1) r_o2) ] = (1+g_m1 r_o1) r_o2 / D ≈ **1/g_m2**\n\n**Input resistance (seen by I_in at node X):**\n\n R_in = 1 / [ g_m2(1+g_m1 r_o1) + 1/r_o2 ] = r_o2 / D ≈ **1/(g_m1 g_m2 r_o1)** (very low)\n\n**Output resistance (at V_out):**\n\n R_out = (r_o1 + r_o2 + g_m1 r_o1 r_o2) / D ≈ **1/g_m2** (low)\n\nwhere D = 1 + g_m2 r_o2 (1 + g_m1 r_o1) = 1 + T, with **loop gain T = g_m2 r_o2 (1 + g_m1 r_o1)**.\n\n(If body effect is included, replace g_m1 by g_m1 + g_mb1.)\n\n## 4. Feedback interpretation (checks the algebra)\n\n- Open‑loop forward path: i_in develops v_X across r_o2 (M₁'s source looks like an open circuit when its drain sees the ideal source I₁), and M₁ converts v_X to v_out with gain (1+g_m1 r_o1): A₀ = (1+g_m1 r_o1) r_o2 ≈ g_m1 r_o1 r_o2.\n- Feedback network: M₂, returning current g_m2·v_out to node X ⇒ β = g_m2 (shunt–shunt).\n- Closed loop: A = A₀/(1+βA₀) = (1+g_m1 r_o1)r_o2/D ≈ 1/g_m2; R_in = r_o2/D; R_out = [r_o1+(1+g_m1 r_o1)r_o2]/D — exactly the expressions above. Negative feedback is confirmed (v_out↑ → M₂ pulls node X down → v_out↓).\n\n## 5. Physical intuition / summary\n\n- Because I₁ is ideal, **all of the ac input current is steered through M₂**, and M₂'s gate voltage (V_out) must adjust by i_in/g_m2 to carry it ⇒ v_out ≈ i_in/g_m2.\n- The loop (M₁ amplifying v_X into v_out, M₂ amplifying v_out back into node X) makes node X a **virtual low‑impedance current summing node** (R_in ≈ 1/(g_m1 g_m2 r_o1)), which is why this topology is used as a regulated‑cascode transimpedance stage / low‑input‑impedance current buffer.\n- Both input and output nodes are low impedance; the circuit is a **transresistance amplifier with R_T ≈ 1/g_m2**, bandwidth‑friendly for current inputs, with dc conditions I_D1 = I₁ and I_D2 = I_B − I_in − I₁ (all devices kept in saturation by proper choice of V_b, I₁, I_B).",
        "format": "markdown",
        "sha256": "1e7241ac549f113821c2f0b892a650a4a445df88ebb47a1317678f507a6a766f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS input device and M2 as the PMOS feedback device driven by Vout, describes feedback to the input node, and gives the very low input resistance and approximately 1/gm2 transresistance and output resistance required for full credit.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1789,
        "output_tokens": 12383,
        "total_tokens": 14172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1789,
        "output_tokens": 12383,
        "total_tokens": 14172,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11245,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part1-030-pmos-current-input-feedback",
      "part": "part1",
      "question_number": 30,
      "question": "Analyze the circuit shown in the figure.",
      "figures": [
        "tasks/part1-030-pmos-current-input-feedback/figure-24.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## 1. What the circuit is\n\n- **M₁** (NMOS): gate at fixed bias V_b, source at node X (the node where I_in is injected), drain at V_out → operates as a **common‑gate (cascode) device**.\n- **M₂** (PMOS): source at V_DD, gate connected to V_out, drain at node X → operates as a **common‑source device**.\n- **I₁** biases the output node (sets I_D1 = I₁); the sink at node X (call it I_SS) together with I_in sets I_D2 = I₁ + I_SS − I_in.\n- **Feedback loop:** V_out → gate of M₂ → node X → source of M₁ → V_out. M₂ (inverting CS) + M₁ (non‑inverting CG) ⇒ **negative feedback**. M₂ samples the output *voltage* (gate) and returns a *current* to the input node (drain): this is **shunt–shunt (voltage–current) feedback**, i.e. a **transimpedance amplifier (current‑in, voltage‑out)**.\n\nCheck of the sign: v_X↑ ⇒ I_D1↓ ⇒ v_out↑ (I₁ fixed) ⇒ V_SG2↓ ⇒ I_D2↓ ⇒ v_X↓. ✔ Negative feedback.\n\n## 2. Small‑signal analysis (ignore body effect; I₁, I_in, I_SS ideal ⇒ ac open)\n\nNode equations (v_x = node X, v_o = V_out):\n\n- Output node (only M₁'s drain and open branches): i_D1 = 0 ⇒ −g_m1 v_x + (v_o − v_x)/r_o1 = 0 ⇒ **v_o = (1 + g_m1 r_o1) v_x**\n- Node X: I_in − g_m2 v_o − v_x/r_o2 + i_D1(=0) = 0 ⇒ I_in = g_m2 v_o + v_x/r_o2\n\n**Transimpedance gain:**\n\nV_out/I_in = r_o2(1 + g_m1 r_o1) / [1 + g_m2 r_o2(1 + g_m1 r_o1)] ≈ **1/g_m2**\n\n**Input resistance (at the I_in node):**\n\nR_in = r_o2 / [1 + g_m2 r_o2(1 + g_m1 r_o1)] ≈ **1/(g_m1 g_m2 r_o1)**  (very low – a virtual ground for the input current)\n\n**Output resistance (looking into V_out, I_in opened):**\n\nR_out = (r_o1 + r_o2 + g_m1 r_o1 r_o2) / [1 + g_m2 r_o2(1 + g_m1 r_o1)] ≈ **1/g_m2**  (low – good voltage output)\n\nAll three results have the classic form (open‑loop value)/(1 + T) with loop gain\n\n**T = g_m2 r_o2 (1 + g_m1 r_o1) ≈ g_m1 g_m2 r_o1 r_o2**\n\n(open‑loop values: R_T,open = r_o2(1+g_m1 r_o1), R_in,open = r_o2, R_out,open = r_o1+r_o2+g_m1 r_o1 r_o2). Including body effect, replace g_m1 by g_m1 + g_mb1 (gate and body of M₁ are both ac ground).\n\n## 3. Intuitive operation\n\nBecause of the strong feedback, node X is held at a **virtual ground**: the input current cannot flow into the high‑impedance branches, so it is absorbed as a change in M₂'s channel current. The output voltage is exactly the gate drive M₂ needs to carry that current: v_out ≈ I_in/g_m2. Note that with an ideal I₁ and open output, M₁ carries *no* ac current; its role is to provide the dc path and, in the open loop, the gain (1 + g_m1 r_o1) that makes T huge.\n\n## 4. Summary\n\n| Quantity | Exact | Approximate |\n|---|---|---|\n| V_out/I_in | r_o2(1+g_m1 r_o1)/(1+T) | 1/g_m2 |\n| R_in | r_o2/(1+T) | 1/(g_m1 g_m2 r_o1) |\n| R_out | (r_o1+r_o2+g_m1 r_o1 r_o2)/(1+T) | 1/g_m2 |\n| Loop gain T | g_m2 r_o2(1+g_m1 r_o1) | g_m1 g_m2 r_o1 r_o2 |\n\n**Conclusion:** the circuit is a two‑transistor shunt–shunt feedback amplifier (transimpedance/current‑to‑voltage converter). Feedback simultaneously desensitizes the gain (≈1/g_m2, set by a device transconductance, hence well defined), and drastically lowers both the input resistance (ideal for sensing a current) and the output resistance (ideal for driving a voltage output). Bias constraints: V_out ≥ V_X + V_OV1 (M₁ saturated), V_X ≤ V_DD − |V_OV2| (M₂ saturated), and V_DD − V_out > |V_TH2| to keep M₂ on.",
        "format": "markdown",
        "sha256": "9553164a32928c6d6ab8952e8a403e4238e2054c32a4b73c5f61ff86c69d2094"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M1 as the common-gate NMOS and M2 as the PMOS feedback device, describes the loop from Vout back to the input node, and gives the low input resistance and the expected transimpedance/output-resistance approximations.",
          "golden_solution_sha256": "81b07f946459ec3d1a0c51926785b2333e0320bb99c892d5929e040324abeaf8",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 15230,
        "total_tokens": 17019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1789,
        "output_tokens": 15230,
        "total_tokens": 17019,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14040,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** Making the load capacitors larger does not destroy the oscillation; it only makes it slower. For any finite value of $C_L$ the loop still oscillates, and the oscillation frequency simply scales (approximately) as $1/(R_{out}C_L)$, so it becomes arbitrarily low but never zero.\n\n**Why the oscillation condition is independent of $C_L$:**\n\n- Model each inverter as a gain stage $-A$ with output resistance $R_{out}$ loading the capacitor $C_L$. Each stage then contributes a pole at $\\omega_p = 1/(R_{out}C_L)$, i.e., a phase lag of $\\arctan(\\omega/\\omega_p)$.\n- **Phase condition:** The three inversions give 540°, so the poles must add another 180° of lag: $3\\arctan(\\omega_{osc}/\\omega_p) = 180°$, giving $\\omega_{osc} = \\sqrt{3}\\,\\omega_p = \\sqrt{3}/(R_{out}C_L)$. Note this is just a *frequency*, and it tracks $\\omega_p$ as $C_L$ changes.\n- **Magnitude condition:** At $\\omega_{osc}$ each pole attenuates by $\\sqrt{1+3} = 2$, so the loop gain magnitude is $(A/2)^3$. Startup requires $(A/2)^3 \\geq 1$, i.e., $A \\geq 2$ — a condition that contains **no capacitance at all**. Increasing $C_L$ moves the critical frequency down, but the loop gain at that frequency stays the same.\n\n**Time‑domain picture:** The circuit is a relaxation oscillator: each node charges/discharges through $R_{out}$ into $C_L$ until the next inverter switches. Enlarging $C_L$ stretches the charging ramps proportionally, so the period grows linearly with $C_L$, but the switching (and hence the oscillation) never stops.\n\n**The only caveat:** in the idealized limit $C_L \\to \\infty$ the node time constants become infinite, the nodes are frozen, and the frequency tends to zero. But \"arbitrarily large\" finite capacitors merely produce arbitrarily slow oscillation — the circuit does not fail to oscillate.",
        "format": "markdown",
        "sha256": "b45d7ea9c09ab581932a8e1249b4e9fadaa2bbc6d9182ade277ad66bf626f7ea"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency and supports this with a valid small-signal phase and gain analysis showing the oscillation condition is independent of capacitance.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1826,
        "output_tokens": 4666,
        "total_tokens": 6492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1826,
        "output_tokens": 4666,
        "total_tokens": 6492,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4165,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No.** For any finite value of $C_L$, no matter how large, the ring still oscillates; making the capacitors large only makes the oscillation slower, it never kills it.\n\n**Why (linear loop analysis):** Model each inverter as a gain $-A_m$ with output resistance $R_o$. Each node then contributes a pole at $\\omega_p = 1/(R_o C_L)$, so the loop gain is\n\n$$H(s) = \\left(\\frac{-A_m}{1 + s R_o C_L}\\right)^3$$\n\n- **Phase condition:** $3\\times180^\\circ - 3\\arctan(\\omega R_o C_L) = 360^\\circ \\Rightarrow \\omega_{osc} = \\sqrt{3}/(R_o C_L)$.\n- **Magnitude condition at $\\omega_{osc}$:** $\\left(A_m/2\\right)^3 \\ge 1 \\Rightarrow A_m \\ge 2$.\n\nNotice that $C_L$ cancels out of the gain requirement entirely: it sets only the *frequency*, not the *startup condition*. As $C_L$ grows, $\\omega_{osc} \\propto 1/C_L$ shrinks toward zero, but for every finite $C_L$ a valid oscillation frequency exists and the loop gain there is unchanged.\n\n**Physical picture:** The capacitors simply slow down the charging/discharging of each node through the inverters' output resistance. The period becomes on the order of $R_o C_L$ per stage — very long for huge capacitors, but still finite. The waveform degenerates toward a slow relaxation (RC charge/discharge) triangle-like wave, yet the odd number of inversions guarantees the loop never settles.\n\nOnly in the unphysical limit $C_L \\to \\infty$ (nodes frozen at fixed voltages, zero frequency) would oscillation cease. For \"arbitrarily large\" but finite capacitors, the circuit keeps oscillating — arbitrarily slowly.",
        "format": "markdown",
        "sha256": "762d55dac5863a7c8e6fd6678123d604bd8b8acfd5a4575165212424e2b5695b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that equal capacitors at all three nodes lower the oscillation frequency without changing the loop-gain condition, and supports this with a small-signal phase and magnitude analysis. The extra claim about inversion alone guaranteeing oscillation is an overstatement, but it does not undermine the central reasoning.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1826,
        "output_tokens": 3606,
        "total_tokens": 5432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1826,
        "output_tokens": 3606,
        "total_tokens": 5432,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 3178,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large",
      "part": "part2",
      "question_number": 1,
      "question": "Does the circuit in the figure fail to oscillate if the three capacitors become arbitrarily large?",
      "figures": [
        "tasks/part2-001-fail-oscillate-three-capacitors-become-arbitrarily-large/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No – it still oscillates; only the frequency collapses toward zero.**\n\n**Why the capacitors can't kill the oscillation:**\n\n- The circuit is a three‑stage ring oscillator. Each inverter contributes a inversion (180°) plus one pole at ω_p = 1/(R_out C_L) (R_out being the inverter's output resistance). The loop transfer function is therefore H(jω) = [−A₀/(1 + jω/ω_p)]³.\n- Phase condition: 540° − 3·arctan(ω/ω_p) = 360° ⇒ arctan(ω/ω_p) = 60° ⇒ ω_osc = √3·ω_p = √3/(R_out C_L).\n- Magnitude condition at that frequency: |H| = A₀³/(1+3)^{3/2} = A₀³/8 ≥ 1, i.e. A₀ ≥ 2 — a condition that contains **no capacitance at all**.\n\nNotice that C_L appears only in the *ratio* ω/ω_p. Making C_L larger simply moves the poles to lower frequency, and the oscillation frequency follows them down (ω_osc ∝ 1/C_L). The gain requirement at the phase‑crossover point is unchanged.\n\n**Physical picture:** With very large capacitors the node voltages simply slew very slowly as each inverter charges/discharges its load cap; the circuit becomes a slow relaxation oscillator with period proportional to R_out C_L. Since an odd number of inverters in a loop has no stable DC state (the DC equilibrium is unstable for stage gain > 2), the circuit must keep switching no matter how slow the capacitors make it.\n\n**Conclusion:** For any finite C_L, however large, the circuit oscillates, with f_osc ≈ √3/(2π R_out C_L) → 0 as C_L → ∞. Only the unphysical limit C_L = ∞ (nodes whose voltage can never change) would freeze the loop; \"arbitrarily large\" finite capacitors merely produce an arbitrarily low oscillation frequency. So the circuit does **not** fail to oscillate.",
        "format": "markdown",
        "sha256": "04e86840e07a04cd5542f284fce873ae7fe829d342bd09d7f8610b625977e849"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that the ring continues oscillating at a lower frequency and supports this with the per-stage phase and gain conditions, which are independent of capacitance. The frequency scaling as 1/C_L is also correct.",
          "golden_solution_sha256": "382bd8dbcc1993e2438bdfd3faf5268719f050e1964cb818b2278171cb2c25bf",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1826,
        "output_tokens": 5349,
        "total_tokens": 7175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4872,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1826,
        "output_tokens": 5349,
        "total_tokens": 7175,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4872,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the phase noise drops by a factor of 4 (6 dB) at a given offset frequency – while the oscillation frequency is cut in half.**\n\n**Why:**\n\n- **Frequency:** Each stage's delay is set by the time constant R_on·C_L, so f_osc ∝ 1/(R_on C_L). Doubling C_L halves f_osc.\n\n- **Phase noise:** Using the charge-based (impulse-sensitivity) view, the phase noise of the ring at offset Δω is\n\n  L(Δω) ≈ (i_n²/2)·(Γ_rms²/q_max²)·(1/Δω²),\n\n  where the noise current i_n² = 4kT/R_on per node is unchanged (devices untouched), the waveform shape (hence Γ_rms) is unchanged, but the maximum charge swing on each node, q_max = C_L·V_DD, **doubles**. Since L ∝ 1/q_max² ∝ 1/C_L², the sideband power falls by 4× (6 dB).\n\n- **Same conclusion from jitter:** The thermal noise voltage stored on each node falls by √2 (v_n² = kT/C_L), but the edge slope dV/dt ∝ V_DD/(R_on C_L) also halves, so the *time* jitter per crossing grows by √2. Because the period doubles, the *phase* jitter per cycle falls by √2 (variance ÷2), and with half as many cycles per second the random-walk phase-noise spectrum S_φ(f) ∝ σ_φ,cycle²/T_osc ∝ 1/C_L² is quartered.\n\n**Net effect:** f_osc → f_osc/2, and L{Δf} → L{Δf} − 6 dB (e.g., −100 dBc/Hz becomes −106 dBc/Hz at the same absolute offset). Note the caveat: if you instead compare at the same *relative* offset (Δf/f_0), the 1/Δf² factor cancels the improvement and the phase noise is unchanged – the 6 dB gain holds for the usual specification at a fixed absolute offset.",
        "format": "markdown",
        "sha256": "7ef7c19cd4e4cb156c3778ee3f53b73318e290c1faf38e6a24198df338246f59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 6 dB (4×) phase-noise reduction at fixed absolute offset and a halving of oscillation frequency, with a consistent charge-based justification. The fixed-relative-offset caveat is also correct.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1824,
        "output_tokens": 5779,
        "total_tokens": 7603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5295,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1824,
        "output_tokens": 5779,
        "total_tokens": 7603,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5295,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the phase noise drops by a factor of 4 (6 dB) at a given offset frequency – but the oscillation frequency is also cut in half, so the improvement is \"paid for\" with speed.**\n\n**Why:**\n\n- **Frequency:** Each stage's delay is set by τ ≈ R_on·C_L, so f_osc = 1/(2·N·R_on·C_L). Doubling C_L halves f_osc.\n\n- **Phase noise:** The node swing is still rail‑to‑rail, so the maximum charge swing on each node, q_max = C_L·V_pp, doubles, while the noise current injected by the inverters (device sizes unchanged) stays the same. Since the phase kick from an injected charge is Δφ = Γ·Δq/q_max, every noise event produces half the phase disturbance, and the phase‑noise power spectral density scales as\n\n  L(Δf) ∝ i_n²/(q_max²·Δf²) ∝ 1/(C_L²·Δf²)\n\n  Doubling C_L therefore gives 4× (6 dB) less phase noise at the same absolute offset.\n\n- **Equivalent jitter picture:** The noise voltage on each cap falls as 1/√C_L while the slew rate falls as 1/C_L, so the timing jitter per edge grows as √C_L; but with half as many edges per second, the *timing* diffusion per second is unchanged. Converting to phase (Δφ = 2π·f_osc·Δt) with f_osc halved gives the factor‑4 reduction in S_φ.\n\n**Caveat:** If you compare phase noise at the same *relative* offset (Δf/f_osc), the improvement disappears – the curve is unchanged, simply centered at half the carrier frequency. So the capacitors buy 6 dB of phase noise only in exchange for halving the oscillation frequency (with power dissipation P ≈ N·C_L·V_DD²·f_osc remaining roughly constant).",
        "format": "markdown",
        "sha256": "6fef8594f47fffa42fba242074a5f94e68f8a6c3a3c686584982508750a2f73e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a fourfold (6 dB) phase-noise reduction at fixed absolute offset and supports it with the halved oscillation frequency and charge/edge-rate reasoning. It also correctly notes that the result is unchanged at fixed relative offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1824,
        "output_tokens": 8730,
        "total_tokens": 10554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8292,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1824,
        "output_tokens": 8730,
        "total_tokens": 10554,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8292,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-002-phase-noise-three-capacitors-doubled",
      "part": "part2",
      "question_number": 2,
      "question": "What happens to the phase noise if the three capacitors in the figure are doubled?",
      "figures": [
        "tasks/part2-002-phase-noise-three-capacitors-doubled/figure-05.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up: What the Capacitors Do\n\nThe circuit is a three‑stage ring oscillator. Each node's time constant is $R_{on}C_L$, so\n\n$$f_{osc} \\approx \\frac{1}{2\\cdot 3 \\cdot R_{on}C_L} \\;\\propto\\; \\frac{1}{C_L}$$\n\nDoubling $C_L$ therefore **halves the oscillation frequency**.\n\n## Effect on Phase Noise\n\nThe device noise of each inverter (channel noise current $\\overline{I_n^2} = 4kT\\gamma g_m$) is integrated on the load capacitor and converted to phase fluctuations. With a maximum charge swing $q_{max} = C_L V_{DD}$ per node, the phase‑noise sideband is\n\n$$S_{\\phi n}(\\Delta f) \\;\\propto\\; \\frac{\\overline{I_n^2}}{q_{max}^2\\,(2\\pi \\Delta f)^2} \\;\\propto\\; \\frac{g_m}{C_L^2 V_{DD}^2\\,(\\Delta f)^2}$$\n\nSince $g_m$ and $V_{DD}$ are untouched, doubling $C_L$ gives a factor $1/4$:\n\n$$\\boxed{S_{\\phi n} \\text{ drops by a factor of 4, i.e. } 6\\ \\text{dB, at a given offset frequency}}$$\n\n**Cross‑check with Leeson's model:** the loaded $Q$ of a ring oscillator ($Q \\approx \\sqrt{3}N/8 \\approx 0.65$ for $N=3$) depends only on the stage count, not on $R_{on}C_L$, and the signal power is unchanged. Hence $L(\\Delta f) \\propto (f_0/2Q\\Delta f)^2$ falls by $(1/2)^2 = 1/4$ — the same 6 dB improvement.\n\n**Intuition (jitter view):** the noise voltage sampled at each switching instant falls as $1/\\sqrt{C_L}$, but the slew rate falls as $1/C_L$, so the timing jitter per cycle grows as $\\sqrt{C_L}$. However, $S_{\\phi} \\propto \\sigma_T^2 f_0^3/\\Delta f^2$, and the cubed frequency term ($\\times 1/8$) outweighs the jitter growth ($\\times 2$), again giving $\\times 1/4$.\n\n## Summary\n\n- $f_{osc}$: halved.\n- Phase noise at a fixed (absolute) offset $\\Delta f$: **improved by 6 dB (factor of 4)**.\n- Caveat: if instead compared at the same *fractional* offset ($\\Delta f / f_{osc}$), the phase noise is essentially unchanged, since the offset scales down with $f_0$ exactly compensating the $1/C_L^2$ benefit.",
        "format": "markdown",
        "sha256": "5a47669104a839e62ff6ded6168326452ec9f190c75887b5e13265885b4ca97d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly states that doubling the capacitors halves the oscillation frequency and reduces phase noise by about a factor of four (6 dB) at a fixed offset frequency. It also correctly notes the unchanged result at a fixed fractional offset.",
          "golden_solution_sha256": "c8a3a6ddcab3a54151ffe61cb3e809a6731a66beda02e9f8898ea9c435318b06",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1824,
        "output_tokens": 8761,
        "total_tokens": 10585,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1824,
        "output_tokens": 8761,
        "total_tokens": 10585,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8108,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes – if C_L is made large enough, the ring oscillator stops oscillating and settles into its stable DC (metastable) point.**\n\n**Why (frequency domain / Barkhausen):** The loop transfer function is\n\nH(s) = –G / [(1 + s/ω₁)(1 + s/ω₂)(1 + s/ω₃)],\n\nwhere ω₁ = 1/(R_out C_L) is the pole of the loaded node and ω₂, ω₃ are the parasitic poles of the other two nodes. Oscillation requires the three poles to contribute 180° of extra phase shift (on top of the 180° inversion) at a frequency where |H| ≥ 1. When C_L is huge, ω₁ becomes the dominant pole: it alone contributes ≈90°, and the remaining 90° must come from ω₂ and ω₃, i.e. at ω ≈ √(ω₂ω₃). But at that high frequency the gain has been attenuated by the dominant pole to roughly G·ω₁/(2√(ω₂ω₃)), which falls below unity once C_L exceeds a critical value (roughly R_out C_L ≳ G·(parasitic time constants)). The loop then remains *negative* feedback at all frequencies where gain ≥ 1, so the circuit converges to the DC bias point (all nodes at the inverter threshold V_M) instead of oscillating.\n\n**Why (time domain intuition):** With an enormous C_L, node X moves so slowly that the other two inverters respond quasi‑statically. The loop then degenerates into a first‑order system:\n\nC_L dV_X/dt = [V_out1(V_X) – V_X]/R_out.\n\nAround the equilibrium, the three inversions make the feedback negative (slope –(G+1)), so V_X simply relaxes exponentially to V_M. A first‑order system cannot overshoot or sustain a limit cycle; oscillation only occurs when the stage delays (time constants) are comparable, so that signals can overshoot the equilibrium.\n\n**Summary:** For moderate C_L the circuit still oscillates, merely at a reduced frequency (f ≈ 1/(2 R_out C_L)-type behavior). But as C_L grows arbitrarily large, the gain condition at the phase‑crossover frequency eventually fails, and the circuit ceases to oscillate, latching into its stable DC operating point.",
        "format": "markdown",
        "sha256": "50196e48b1611618da81204c30ad67cb376b6333193f641b3e9dcca32c26080f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that arbitrarily large loading on one node can stop oscillation, identifying the dominant pole, loop-gain loss at the phase-crossover frequency, and settling near a DC operating point. The approximate formulas and time-domain explanation are consistent with the essential answer.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1731,
        "output_tokens": 12285,
        "total_tokens": 14016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11765,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1731,
        "output_tokens": 12285,
        "total_tokens": 14016,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11765,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No – for any finite value of C_L the circuit keeps oscillating; only the frequency changes.**\n\n**Why:** The loop contains an odd number (three) of inversions, so it has no stable DC operating point: the only \"equilibrium\" (all nodes at the inverters' trip point) is unstable. The capacitor C_L does not remove this property; it merely sets the time constant at the loaded node. When that node is pulled up or down by the first inverter, its voltage moves with a time constant on the order of R_on·C_L (R_on being the output resistance of the driving inverter). As soon as the voltage crosses the threshold of the second inverter, the state of the loop flips and the capacitor is charged/discharged in the opposite direction. This repetition is exactly what sustains the oscillation.\n\n**Effect of large C_L:** The delay of the loaded stage becomes dominant, so the oscillation period grows roughly in proportion to C_L:\n\nf_osc ≈ 1 / (2·(R_on C_L + other stage delays)) ≈ 1/(2 R_on C_L)\n\nThus making C_L arbitrarily large makes the oscillation arbitrarily *slow* (f_osc → 0 only in the limit C_L → ∞, i.e., a node that is frozen forever), but for every finite capacitance the loop still undergoes its charge–discharge–flip cycle and the circuit oscillates. Large C_L lowers the frequency; it does not destroy the oscillation mechanism.",
        "format": "markdown",
        "sha256": "15fbcbfb444fefda95bac5d6bcecb82d5818c0d5a7108d8f50fa22a47fff8b6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer reaches the opposite conclusion: a sufficiently large one-node capacitor can prevent oscillation by causing excessive loop gain and phase roll-off. It recognizes that the load increases the node time constant and lowers frequency, but incorrectly claims oscillation persists for every finite capacitance.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1731,
        "output_tokens": 11738,
        "total_tokens": 13469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1731,
        "output_tokens": 11738,
        "total_tokens": 13469,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11416,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-003-fail-oscillate-cl-becomes-arbitrarily-large",
      "part": "part2",
      "question_number": 3,
      "question": "Does the circuit in the figure fail to oscillate if CL becomes arbitrarily large?",
      "figures": [
        "tasks/part2-003-fail-oscillate-cl-becomes-arbitrarily-large/figure-06.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes – for a sufficiently (arbitrarily) large C_L the loop can no longer sustain oscillation.**\n\n**Why:** Model each inverter as a gain stage –A₀ with output resistance R_out. The unloaded nodes have pole ω_p = 1/(R_out C_p) (C_p = parasitic capacitance), while the loaded node has ω_p1 = 1/(R_out C_L) → 0 as C_L → ∞.\n\n- **Phase condition:** The loop must accumulate 180° of excess phase (on top of the 3×180° inversion). With C_L huge, the loaded node's pole contributes ≈90° at any frequency of interest, so the remaining 90° must come from the two unloaded poles (45° each), fixing ω_osc ≈ ω_p – i.e., the oscillation frequency cannot slide down toward 1/(R_out C_L); it stays near the unloaded stages' pole.\n- **Magnitude condition:** At ω_osc ≈ ω_p, the loaded stage's gain is A₀/√(1+(ω_p/ω_p1)²) ≈ A₀·ω_p1/ω_p = A₀·C_p/C_L, so the loop gain is\n\n  |L| ≈ A₀³ · C_p / (2 C_L).\n\n  As C_L → ∞ this falls below unity (startup requires A₀³ C_p/(2C_L) ≥ 1), violating Barkhausen's magnitude criterion.\n\n**Physical picture:** The capacitor makes that node so slow that, at the only frequency where the phases add up correctly, the first stage provides almost no gain (each stage must still deliver a gain of ≈2). The small signal around the unstable DC point then decays instead of growing, and the loop settles into its metastable DC equilibrium (all nodes near V_TH) rather than oscillating. Only in the idealized limit of infinite‑gain inverters would oscillation persist; with real finite‑gain stages, an arbitrarily large C_L kills the oscillation.",
        "format": "markdown",
        "sha256": "8d16ac68391d9b4504b28c8ba38c7f1d40ec7292c2a4094d15be600d4f4a3250"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes that sufficiently large capacitance on one node creates a dominant pole and reduces loop gain below unity at the phase condition, so oscillation fails. The added frequency and gain estimates are consistent with the stated mechanism.",
          "golden_solution_sha256": "f6dd3ed123c88a59472f7a76de74df7e33b3e73498632bd24bc1ea808e4efcbc",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1731,
        "output_tokens": 18184,
        "total_tokens": 19915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1731,
        "output_tokens": 18184,
        "total_tokens": 19915,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17745,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Circuit identification\n\nThe figure is a **three‑stage ring oscillator** (three CMOS inverters in a loop). So the question is about how device sizing scales the phase noise of a ring oscillator.\n\n## What doubling W does to each stage\n\n- $g_m$, $I_D$ (and hence each device's channel thermal‑noise current PSD, $\\overline{I_n^2} = 4kT\\gamma g_m$) **double**.\n- All node capacitances (gate + drain caps) **double**.\n- Delay per stage $\\approx C_L V_{swing}/I_D$: both $C_L$ and $I_D$ double → **$f_{osc}$ unchanged**.\n- Swing is rail‑to‑rail → **amplitude unchanged**; waveform shape (and ISF) unchanged.\n- Bias current doubles → **power dissipation doubles**.\n\n## Effect on phase noise\n\nUsing the impulse/charge model (or equivalently, jitter = noise voltage ÷ slope at the crossing):\n\n$$S_\\phi(\\Delta f) \\propto \\frac{\\overline{I_n^2}}{q_{max}^2\\,(2\\pi\\Delta f)^2},\\qquad q_{max} = C_L V_{DD}$$\n\nDoubling widths: $\\overline{I_n^2} \\to 2\\overline{I_n^2}$ but $q_{max}^2 \\to 4 q_{max}^2$, so\n\n$$S_\\phi \\to \\frac{2}{4} S_\\phi = \\frac{1}{2} S_\\phi$$\n\nEquivalently: the mean‑square noise voltage on each node ($\\propto kT/C$) halves while the edge slope ($I/C$) stays the same, so the timing jitter per crossing drops by $\\sqrt{2}$ in rms (half in variance). The same 2×/4× scaling applies to the flicker‑noise ($1/f^3$) region.\n\n## Conclusion\n\n- **Phase noise improves by 3 dB** (a factor of 2) at all offset frequencies, with $f_{osc}$ and output swing unchanged.\n- The price is **twice the power dissipation** (double the bias current in every stage).\n- Hence the oscillator **figure of merit (FOM) is unchanged** — widening the devices simply buys 3 dB of phase noise for 3 dB of power; there is no free improvement in efficiency.",
        "format": "markdown",
        "sha256": "af02863e2fa360d8cf6f637934b1d071d68dd9209e1f71bf7eafe28e812c8a6b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly concludes about a 3 dB phase-noise reduction and supports it with the valid scaling: device noise power doubles while signal charge squared increases fourfold. The stated frequency and power trends are also consistent with the golden solution.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2545,
        "output_tokens": 4730,
        "total_tokens": 7275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2545,
        "output_tokens": 4730,
        "total_tokens": 7275,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4198,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the circuit\n\nThe figure is a **three‑stage ring oscillator** (three CMOS inverters in a loop). Each node's capacitance is essentially the gate/output capacitance of the inverters themselves, so all relevant capacitances scale with W.\n\n## What doubling W does to each quantity\n\n| Quantity | Scaling | Why |\n|---|---|---|\n| Device current, g_m | ×2 | g_m, I_D ∝ W |\n| Node capacitance C (gate + drain caps) | ×2 | C ∝ W |\n| On‑resistance R_on | ÷2 | R_on ∝ 1/W |\n| Oscillation frequency f₀ = 1/(2N·R_onC) | **unchanged** | R_on halves while C doubles |\n| Slew rate I/C at switching | unchanged | I and C both double |\n| Device thermal noise current, $\\overline{i_n^2}=4kT\\gamma g_m$ | ×2 | g_m doubles |\n\n## Effect on phase noise\n\nThe timing jitter each stage injects is set by the *voltage* noise at the node divided by the slew rate. The node impedance seen by the noise current is set by C, which doubles, so the voltage noise PSD goes as:\n\n$$\\overline{v_n^2} = \\overline{i_n^2}\\,|Z|^2 \\propto \\frac{g_m}{C^2} \\rightarrow \\frac{2}{4} = \\frac{1}{2}$$\n\nWith the slew rate (and f₀) unchanged, the jitter PSD — and hence the phase noise — is cut in half. Equivalently, from the ring‑oscillator phase‑noise relation\n\n$$\\mathcal{L}(\\Delta f) \\propto \\frac{kT\\gamma}{C_{node}V_{DD}^2}\\left(\\frac{f_0}{\\Delta f}\\right)^2,$$\n\nC_node doubles while f₀ stays fixed.\n\n## Conclusion\n\n- **Oscillation frequency: unchanged** (delay per stage R_on·C is invariant).\n- **Phase noise: drops by a factor of 2, i.e., improves by 3 dB** at all offset frequencies (the 1/Δf² shape is preserved).\n- **Price paid:** the bias current and hence power dissipation double. So the oscillator's phase‑noise figure of merit (which normalizes for power and frequency) is unchanged — the 3 dB improvement is exactly what buying 2× the power buys you.",
        "format": "markdown",
        "sha256": "7f9b1685b19d330518e1c4f82392da815450e7d5b0b5c2f3c88233ce54f55ad8"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly predicts a 3 dB phase-noise reduction and gives a physically consistent scaling argument: device noise current doubles while node capacitance doubles, reducing node-noise voltage PSD by half at a given offset. The frequency and power conclusions are also consistent with the stated assumptions.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2545,
        "output_tokens": 5958,
        "total_tokens": 8503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2545,
        "output_tokens": 5958,
        "total_tokens": 8503,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5404,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-004-double-widths-nmos-and-pmos-devices-phase",
      "part": "part2",
      "question_number": 4,
      "question": "If we double the widths of the NMOS and PMOS devices in the figure, what happens to the phase noise?",
      "figures": [
        "tasks/part2-004-double-widths-nmos-and-pmos-devices-phase/figure-07.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Circuit identification:** The figure is a three‑stage CMOS ring oscillator (three inverters in a loop).\n\n**What scaling the widths does:**\n\n- *Oscillation frequency:* Each node's capacitance (gate capacitance of the next stage + drain capacitance of this stage) is proportional to W, while each device's on‑resistance/transconductance scales as 1/W (gm ∝ W). The stage delay ≈ Ron·Cnode is therefore unchanged, so **fosc stays the same**. The swing also stays the same (rail‑to‑rail, VDD).\n\n- *Noise:* The channel thermal (and flicker) noise current of each device has a PSD ∝ gm ∝ W, so the noise current injected at each node **doubles**.\n\n- *Signal (charge) swing:* The maximum charge swing at each node is qmax = Cnode·Vswing ∝ W, so qmax **doubles**, and qmax² quadruples.\n\n**Phase noise result:** Since the sideband level goes as (in²/Δf)/qmax² (Hajimiri/Leeson type relation), the factor is 2/4 = 1/2. Equivalently, in Leeson's form the \"signal power\" ½C VDD²·fosc doubles while fosc and the ring's Q are unchanged, so L(Δω) is cut in half.\n\n**Answer:** The phase noise **drops by a factor of 2, i.e., improves by 3 dB**, at every offset frequency (with the oscillation frequency unchanged).\n\n**The price:** the capacitances double, so the power dissipation P = N·Cnode·VDD²·fosc also doubles. Thus the 3 dB phase‑noise improvement is bought exactly with 3 dB more power — the oscillator's figure of merit (phase noise normalized to carrier frequency and power) remains unchanged.",
        "format": "markdown",
        "sha256": "93a8220133864382d425b085b8df43b47befdde67492be0dbabf77d810398614"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives a 3 dB (factor-of-two) phase-noise reduction and supports it with the valid scaling: node charge doubles while white-noise current power doubles. The added power-cost discussion is consistent with the result.",
          "golden_solution_sha256": "f9299196b0b81aa8f665614cd6e16eba9d8392f73cfe6422876d92d225ddc94e",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2545,
        "output_tokens": 5113,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2545,
        "output_tokens": 5113,
        "total_tokens": 7658,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 4704,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nModel each inverter as a CMOS pair (NMOS: $g_{mN}, r_{oN}$; PMOS: $g_{mP}, r_{oP}$) and apply a test voltage $v_x$ at the supply node. Writing KCL at each output node (loaded only by the next gate):\n\n$(g_{mN}+g_{mP}+1/R_o)\\,v_{out,k} = (g_{mP}+1/r_{oP})\\,v_x - (g_{mN}+g_{mP})\\,v_{in,k},\\quad R_o = r_{oN}\\|r_{oP}$\n\nClosing the loop ($v_{in,k} = v_{out,k-1}$, three stages) forces the only consistent solution to be $v_1 = v_2 = v_3 = v$. **Every inverter therefore has its input and output at the same small‑signal voltage** – each transistor behaves as if its gate were tied to its drain, i.e., as a *diode-connected* device.\n\n## Result\n\nEach inverter branch from the supply node to ground is then a series connection of a diode-connected PMOS and a diode-connected NMOS:\n\n$R_{branch} = \\left(\\frac{1}{g_{mP}}\\Big\\| r_{oP}\\right) + \\left(\\frac{1}{g_{mN}}\\Big\\| r_{oN}\\right)$\n\nand the three identical branches appear in parallel at the supply node:\n\n$$R_X = \\frac{1}{3}\\left[\\left(\\frac{1}{g_{mP}}\\Big\\| r_{oP}\\right) + \\left(\\frac{1}{g_{mN}}\\Big\\| r_{oN}\\right)\\right] = \\frac{1}{3}\\left(\\frac{1}{g_{mN}+1/r_{oN}} + \\frac{1}{g_{mP}+1/r_{oP}}\\right)$$\n\nNeglecting channel-length modulation:\n\n$$\\boxed{R_X = \\frac{1}{3}\\left(\\frac{1}{g_{mN}} + \\frac{1}{g_{mP}}\\right)\\;\\; \\left(= \\frac{2}{3g_m}\\ \\text{if } g_{mN}=g_{mP}=g_m\\right)}$$\n\n**Interpretation:** because the odd-stage loop provides negative feedback at DC, all internal nodes move together, so each inverter degenerates into two diode-connected transistors in series; the supply node sees three such branches in parallel, giving a small positive resistance on the order of $1/g_m$ — which is why supply noise couples so strongly into ring oscillators.",
        "format": "markdown",
        "sha256": "93bee71970a352839906c4ecea74c7e23e3b8d2d506d5fc8470cfc398e75725c"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance and ignores the oscillation-driven charging and discharging of the node capacitances, which sets the supply resistance (approximately 1/(3f0CL), with possible frequency-dependence refinement).",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2542,
        "output_tokens": 10698,
        "total_tokens": 13240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2542,
        "output_tokens": 10698,
        "total_tokens": 13240,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10082,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nEach inverter is a CMOS pair: the PMOS sources (and bodies) hang on the supply node, the NMOS sources go to ground. Apply a test voltage $v_X$ at the supply node and measure the current $i_X$ drawn.\n\n**Symmetry:** The excitation at the supply node is identical for all three stages, and the loop is cyclically symmetric. Hence all three internal (gate/drain) nodes must move by the same small‑signal amount, call it $v$.\n\n**KCL at any output node** (gate currents are zero):\n\n$$g_{mP}(v-v_X)+\\frac{v-v_X}{r_{OP}}+g_{mN}v+\\frac{v}{r_{ON}}=0$$\n\nNeglecting $r_O$ (or absorbing $g_{ds}$ into the g's), with $g_{mN}=g_{mP}=g_m$:\n\n$$v = \\frac{v_X}{2}$$\n\n**Current from the test source:** Each PMOS sees $v_{GS} = v - v_X = -v_X/2$, so each stage pulls $g_m v_X/2$ from the supply node; three stages give\n\n$$i_X = 3\\cdot \\frac{g_m v_X}{2}$$\n\n## Result\n\n$$R_X = \\frac{v_X}{i_X} = \\frac{2}{3g_m}$$\n\nMore generally (unequal devices, including output conductances):\n\n$$R_X = \\frac{1}{3}\\left[\\frac{1}{g_{mP}+g_{dsP}}+\\frac{1}{g_{mN}+g_{dsN}}\\right] \\approx \\frac{1}{3}\\left(\\frac{1}{g_{mN}}+\\frac{1}{g_{mP}}\\right)$$\n\n**Intuition:** because the gate and drain of each PMOS rise by $v_X/2$ while its source rises by $v_X$, each device acts like a \"half‑diode‑connected\" transistor presenting $\\approx 2/g_m$; the three identical branches in parallel yield $R_X = 2/(3g_m)$ — a fairly low resistance, which is why supply noise couples strongly into ring oscillators.",
        "format": "markdown",
        "sha256": "80ac4bcbd0de50f599bc6d1c21179e8fce8ea41eaf970bb188f0383b2587005b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives a static gm-based resistance from symmetry and diode-connected-device intuition, but ignores the oscillation-driven charging and discharging of the load capacitances that sets the resistance.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2542,
        "output_tokens": 7705,
        "total_tokens": 10247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2542,
        "output_tokens": 7705,
        "total_tokens": 10247,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7207,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-005-determine-small-signal-resistance-seen-looking-into",
      "part": "part2",
      "question_number": 5,
      "question": "Determine the small-signal resistance seen looking into the supply node of the ring oscillator in the figure.",
      "figures": [
        "tasks/part2-005-determine-small-signal-resistance-seen-looking-into/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up\n\nModel each inverter as a PMOS (source at V_DD) and NMOS (source at ground) with transconductances g_m and output resistances r_o. Apply a test voltage v_x to the supply node and solve the small‑signal loop equations (capacitors open at low frequency).\n\n**Loop constraint:** Writing KCL at each inverter output (gate of stage i at v_i, output at v_{i+1}):\n\ng_mE(v_x − v_i) + (v_x − v_{i+1})/r_o = g_mE v_i + v_{i+1}/r_o\n\nSolving around the three‑stage loop (using 1 + m³ = (1+m)(1 − m + m²), m = g_mE r_o) forces **all internal node voltages to v_x/2**. Hence every transistor has its gate and drain at the same small‑signal potential: each device behaves as a **diode‑connected** transistor presenting (1/g_mE ‖ r_o).\n\n## Computing R_x\n\nEach inverter then looks like a series stack from the supply node to ground:\n\nR_branch = (1/g_mE,P ‖ r_o,P) + (1/g_mE,N ‖ r_o,N)\n\nand the three identical branches appear in parallel at the supply node:\n\n**R_x = (1/3)[(1/g_mE,N ‖ r_o,N) + (1/g_mE,P ‖ r_o,P)]**\n\nFor identical devices (g_mE,N = g_mE,P = g_mE, r_o,N = r_o,P = r_o):\n\nR_x = (2/3)(1/g_mE ‖ r_o) ≈ **2/(3 g_mE)**  (since g_mE r_o ≫ 1)\n\n## Interpretation\n\nCheck: each PMOS carries i = (g_mE + 1/r_o)(v_x − v_x/2), so i_x = 3·(g_mE + 1/r_o)v_x/2, giving R_x = 2/(3(g_mE + 1/r_o)) — consistent. The supply node of a ring oscillator is therefore a *low‑impedance* node (on the order of 1/g_mE), which is why supply noise couples so efficiently into oscillators.",
        "format": "markdown",
        "sha256": "c76457aa3057de5ee46406a2c3e558f6b7a574cb4ddd8647559e0cc9c047b4b1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer derives the static gm-based resistance from diode-connected inverter intuition and ignores the dominant oscillation-driven charging and discharging of the load capacitances. The golden solution assigns this internally consistent static analysis a score of 1.",
          "golden_solution_sha256": "567a4e1905413cda5af92a626cb359563db923ba665d1835ff2377a534cd5d21",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2542,
        "output_tokens": 6719,
        "total_tokens": 9261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2542,
        "output_tokens": 6719,
        "total_tokens": 9261,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6226,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: yes – once the ring actually oscillates, (1/3)(1/gmn + 1/gmp) no longer describes what the supply node sees.** That expression is the linearization about the *metastable* DC operating point (all six transistors saturated, every node at the trip voltage, Vin = Vout for each inverter). Oscillation means the circuit has left that point, and the resistance seen from the supply node in the oscillating state is a completely different, time‑varying, and much larger quantity.\n\n**Where the formula comes from (and why it is \"right\" only at the metastable point).**\nAt the metastable equilibrium, injecting a test voltage vx at the supply node forces, by KCL at each output node (gates draw no DC current), all internal node increments to the same value v = vx·gmp/(gmn+gmp). Hence every gate and drain of every transistor move together incrementally, i.e. each device indeed looks diode‑connected, each inverter presents 1/gmn + 1/gmp from supply to ground, and the three in parallel give RX = (1/3)(1/gmn + 1/gmp). Note that this linearized result already includes the feedback loop (the loop does not modify it at DC); so the formula is exactly the small‑signal resistance *of the metastable bias point*.\n\n**But that bias point is unstable.** A loop of three inverting gain stages with |gain| > 1 per stage has right‑half‑plane poles; any noise kicks the circuit off the metastable point and it settles into rail‑to‑rail oscillation. So \"the circuit oscillates\" and \"the circuit sits at the point where each inverter looks like two diode‑connected devices\" are mutually exclusive statements.\n\n**What the supply node sees during oscillation.**\n- Most of the time each inverter's input is near a rail. If the input is high, that inverter's PMOS is off: the supply path through it is blocked. If the input is low, the PMOS is on but carries no DC current (the NMOS is off), so the inverter again presents a very high incremental resistance (off‑device/ro‑scale).\n- Only during the brief switching instants are both devices conducting (shoot‑through), and only then does the inverter momentarily resemble the diode‑connected pair.\n- Consequently RX(t) is a strongly time‑varying periodic quantity: very large for most of the cycle, dipping toward (1/gmn+1/gmp) only for a small fraction of it. The effective DC resistance seen from the supply is VDD/Iavg, where Iavg is just the switching/shoot‑through current (≈ C·VDD·fosc per stage) – typically tens to hundreds of kΩ, versus the ~kΩ/3 the formula predicts.\n- More fundamentally, linearizing about a *periodic* steady state yields a linear periodically time‑varying network: a small test tone at f produces responses at f ± k·fosc, so a single number \"RX\" is not even well defined there (one needs a conversion matrix/describing function).\n\n**Conclusion.** The expression RX ≈ (1/3)(1/gmn + 1/gmp) is valid only for the unstable equilibrium (or if oscillation were somehow suppressed). If the circuit oscillates, the premise \"each inverter is two diode‑connected devices in series\" collapses because the transistors are hard‑switched between cutoff and deep triode; the resistance seen looking into the supply node becomes time‑varying and orders of magnitude larger. So yes, the answer changes.",
        "format": "markdown",
        "sha256": "350ce00f962a259141e8cf9bda9ce89d1e00fb9149362f15de13a063dd7500aa"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes switching and capacitive supply current, but concludes that the effective resistance becomes much higher because devices are off much of the cycle. The key result is that the capacitive-current estimate scales with oscillation frequency, leaving RX on the order of the MOS on-resistance, not orders of magnitude larger.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 5252,
        "output_tokens": 24022,
        "total_tokens": 29274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22454,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2626,
        "output_tokens": 12011,
        "total_tokens": 14637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11227,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes – once the ring oscillates, that expression no longer describes what the supply node sees.**\n\n**Where the formula comes from (and what it assumes).** $R_X \\approx \\tfrac{1}{3}(1/g_{mn} + 1/g_{mp})$ is obtained by biasing the loop at its metastable point, $V_{in} = V_{out} \\approx V_{DD}/2$ for every inverter. Only at that point does each transistor's gate small‑signal voltage equal its own drain voltage, so each device mimics a diode‑connected transistor, and each inverter looks like $1/g_{mp} + 1/g_{mn}$ from $V_{DD}$ to ground, with three such paths in parallel.\n\n**But that bias point is exactly the unstable equilibrium.** The oscillation condition (loop gain $\\geq 1$ with the three stages supplying 180° of phase shift plus the 180° of inversion) means the linearized loop has right‑half‑plane poles *about that same point*. So \"the circuit oscillates\" and \"the circuit sits at the bias point used to derive $R_X$\" are mutually exclusive: any perturbation grows until the nodes swing rail‑to‑rail, and the diode‑connected picture ($v_g = v_d$, devices in saturation) is destroyed.\n\n**What the supply node actually sees during oscillation.** The inverters now act as switches, so the resistance looking into the supply node is a *time‑varying, large‑signal* quantity:\n\n- In the quasi‑static states (output high or low), one transistor of each inverter is cut off: there is no DC path from the supply node to ground at all, so the instantaneous resistance is essentially infinite (only capacitive charging current flows).\n- During the brief transitions, both devices of a switching inverter are on, presenting a low triode‑region path $\\approx r_{on,p} + r_{on,n}$, much smaller than $1/g_{mn} + 1/g_{mp}$.\n- The meaningful (averaged) resistance is therefore $R_{eff} \\approx V_{DD}/I_{avg}$, with $I_{avg} \\approx 3 f_{osc} C_L V_{DD} + I_{shoot\\text{-}through}$ set by the switching frequency, load capacitances and overlap current — none of which appear in $\\tfrac{1}{3}(1/g_{mn}+1/g_{mp})$.\n\n**A deeper point.** Small‑signal resistance is defined by linearizing about a *steady* operating point. With RHP poles present, a test current injected at the supply node does not produce a settled proportional voltage; the response grows into the limit cycle. So during oscillation there is no LTI small‑signal $R_X$ at all — only a periodically time‑varying impedance (with frequency conversion) and its large‑signal average.\n\n**Conclusion.** The expression $\\tfrac{1}{3}(1/g_{mn}+1/g_{mp})$ is valid only for the (unstable) metastable DC equilibrium — i.e., for the linearized circuit *before* oscillation starts, or if oscillation is prevented (loop broken, gain per stage < 2). If the circuit truly oscillates, the answer changes: the supply sees a switched, time‑varying load whose effective resistance is governed by the large‑signal switching dynamics ($\\approx V_{DD}/I_{avg}$), not by the diode‑connected $1/g_m$ values.",
        "format": "markdown",
        "sha256": "9386bcac826c461ca5aa2bc6e86a23557c488309f145f36e1bab213fb7807f3f"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It identifies the capacitive switching-current mechanism and gives an equivalent average-current expression, but does not show that the resulting resistance remains on the order of the MOS on-resistance or inverse transconductance. It also overemphasizes the instantaneous off-state resistance without resolving the key magnitude comparison.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4608,
        "input_tokens": 5252,
        "output_tokens": 19886,
        "total_tokens": 25138,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 18362,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2626,
        "output_tokens": 9943,
        "total_tokens": 12569,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9181,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-006-oscillates-change",
      "part": "part2",
      "question_number": 6,
      "question": "For the ring oscillator in the figure, somebody computes the small-signal resistance `RX`\nseen looking into the supply node as\n\n```text\nRX ~= (1/3) (1/gmn + 1/gmp)\n```\n\nwhere `gmn` and `gmp` are the transconductances of the NMOS and PMOS devices in each\ninverter, because each inverter behaves as two diode-connected devices in series.\n\nIf the circuit oscillates, does this answer change?",
      "figures": [
        "tasks/part2-006-oscillates-change/figure-08.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer: yes – the formula stops describing the circuit once it oscillates.\n\n**What the calculation actually assumes.** The expression $R_X \\approx \\frac{1}{3}(1/g_{mn} + 1/g_{mp})$ is the linearization about the *metastable DC equilibrium* of the loop, i.e. the point where every inverter sits at $V_{in} = V_{out} \\approx V_{DD}/2$ with all six transistors in saturation. At that point a test signal on the supply rail forces every node in the loop to move by the same amount (the loop equations admit only the symmetric solution), so each transistor sees $v_{gs} = v_{ds}$ (NMOS) and $v_{sg} = v_{sd}$ (PMOS) – hence the \"diode‑connected pair in series\" per inverter, and three such branches in parallel from the supply node to ground. Nothing wrong with that algebra – *at that bias point*.\n\n**Why oscillation invalidates it.** That equilibrium is unstable; its instability *is* the oscillation. A circuit that oscillates never resides at $V_{in}=V_{out}=V_{DD}/2$, so the $g_m$'s used in the formula are not the transconductances the devices actually exhibit. In the periodic steady state:\n\n- **Most of the cycle:** each inverter has one device cut off (outputs sit near the rails), so there is *no conducting path at all* from the supply node to ground. The instantaneous resistance seen at the supply node is essentially open‑circuit; the supply only delivers capacitive charging current.\n- **During the brief switching overlaps:** exactly one inverter has both devices on, giving a path of roughly $1/g_{mn} + 1/g_{mp}$ – through *one* inverter, not three in parallel.\n- **Cycle‑averaged (incremental) resistance:** the average supply current is the dynamic current $I_{avg} \\approx 3 C_L V_{DD} f_{osc}$ (plus short‑circuit current), so the effective resistance is $dV_{DD}/dI_{avg}$, typically kilo‑ohms – an order of magnitude or more larger than $\\frac{1}{3}(1/g_{mn}+1/g_{mp})$, which is only a few hundred ohms. Formally, linearizing about a periodic orbit yields a periodically time‑varying impedance (with frequency conversion), not a constant $R_X$.\n\n**Conclusion.** The quoted value is correct only for the (unstable) DC solution – physically, at most during the infinitesimal start‑up transient before the swings grow. Once the ring oscillator is oscillating, the resistance seen looking into the supply node becomes a large, time‑varying quantity set by switching behavior and load‑capacitor charging, not by the diode‑connected $1/g_m$ picture. So yes, the answer changes: $R_X \\approx \\frac{1}{3}(1/g_{mn}+1/g_{mp})$ does not describe the oscillating circuit.",
        "format": "markdown",
        "sha256": "256b27770310682c1a236ea33fa5fc2e9fca0e14aff6d2928c497fd4784bd9a5"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies capacitive switching current, but concludes the effective resistance is much higher because devices are off most of the cycle. The oscillation frequency scales inversely with the RC delay, so the resulting resistance remains on the order of the MOS on-resistance, not much higher than the static estimate.",
          "golden_solution_sha256": "41b3aba626dbabae7c16266607298d97003b7365b7c8eebf62086ccaef8b74fa",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 4608,
        "input_tokens": 5252,
        "output_tokens": 19022,
        "total_tokens": 24274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 17690,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2304,
        "input_tokens": 2626,
        "output_tokens": 9511,
        "total_tokens": 12137,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8845,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It increases – roughly in proportion to √(W₇).**\n\n**Why:**\n\n- M7 is the tail (clock) transistor of the input differential pair M1–M2. When CK goes high and the precharge switches S1–S4 turn off, M7 sets the tail current: I_SS ∝ (W/L)₇ (M7 is on with V_GS ≈ V_DD and initially in saturation).\n- Before the cross‑coupled latch (M3–M6) regenerates, the circuit behaves as an ordinary differential pair: the input difference is converted to a differential current by g_m1,2, and this current develops the initial differential output voltage at X and Y (charging/discharging the node capacitances and working into the latch's load). Hence the initial (pre‑regeneration) gain is set by g_m1,2.\n- Since g_m1,2 = √(μ_n C_ox (W/L)₁,₂ · I_SS) ∝ √I_SS ∝ √(W/L)₇, widening M7 raises the transconductance of the input pair and therefore raises the initial voltage gain.\n\n**Consequences/notes:**\n\n- The increase is only sub‑linear (square‑root): doubling W7 does not double the gain.\n- A larger tail current also discharges nodes P and Q faster, so the latch (M3–M6) turns on sooner and regeneration starts earlier – i.e., the comparator becomes faster as well.\n- The penalties are higher power dissipation, larger kickback/clock loading (bigger gate capacitance on CK), and a larger offset contribution if the latch must resolve a smaller initial difference.\n\n**Bottom line:** increasing the width of M7 increases the tail current, which increases g_m1,2 and hence increases the initial voltage gain (∝ √W₇), at the cost of power and clock loading.",
        "format": "markdown",
        "sha256": "dbef8c10de57c6757344d87a7cec6cacc03f3818a9ef8aa2669dbfed9ce1bff0"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies M7 as the tail device and notes that widening it increases tail current, but it reaches the opposite of the essential result. It overlooks that the initial gain scales roughly with gm/ICM, which decreases as current rises.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 9738,
        "total_tokens": 12266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 9738,
        "total_tokens": 12266,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9324,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial gain goes down.**\n\nWhen CK goes high and evaluation begins, the circuit first acts as a simple differential pair (M1–M2 with tail device M7), and the small‑signal gain at nodes X, Y (before the latch regenerates) is set by gm1,2 times the resistance at those nodes (ro1,2 ‖ ro3,4 ‖ ro5,6 …), i.e., essentially the intrinsic gain gm·ro of the devices carrying the tail current.\n\nWidening M7 lowers its on‑resistance, so the tail current ISS increases. Then:\n\n- gm1,2 increases only as √ISS\n- but every output resistance in the signal path (ro1,2, ro3,4, ro5,6) falls as 1/ISS\n\nso the initial voltage gain ≈ gm1,2·(ro1,2 ‖ ro3,4 ‖ …) ∝ 1/√ISS **decreases** (roughly by the square root of the increase in tail current).\n\nIn short: a wider M7 speeds up the comparison (faster discharge of P, Q and faster regeneration), but it raises the bias current and therefore *reduces* the initial voltage gain.",
        "format": "markdown",
        "sha256": "ea159e2563928b4cd611b810abb9b6e7840a795f6a4f20820a299d9cf0ddd593"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "The trend is correct, and the answer correctly notes that widening M7 raises tail current while input-pair gm grows only as the square root of current. However, it models the transient integration gain as a static gm·ro gain; the key effect is the reduced integration gain as tail current increases.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2528,
        "output_tokens": 10254,
        "total_tokens": 12782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2528,
        "output_tokens": 10254,
        "total_tokens": 12782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-007-initial-voltage-gain-as-width-m7-increases",
      "part": "part2",
      "question_number": 7,
      "question": "In the circuit shown in the figure, what happens to the initial voltage gain as the width of M7 increases?",
      "figures": [
        "tasks/part2-007-initial-voltage-gain-as-width-m7-increases/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial (pre‑regeneration) voltage gain goes up.**\n\n**Why:** In this clocked comparator, when CK goes high the switches S1–S4 open, M7 turns on, and the input pair M1–M2 first operates as a plain differential pair: the input difference is converted into a differential current (gm1,2·Vin,diff) that develops the initial voltage difference across nodes P, Q (and hence X, Y) before the cross‑coupled latch (M3–M6) fires. The strength of this first phase is set by the transconductance of M1–M2, which in turn is set by the tail current delivered through M7.\n\n- Widening M7 lowers its on‑resistance (Ron7 ≈ 1/[μnCox(W/L)7(VGS–VTH)]) and raises the tail current it can sink at the start of evaluation.\n- With less voltage dropped across M7, the input transistors see a larger effective overdrive, so gm1,2 increases (roughly as √ISS, i.e., ∝ √W7 while M7 limits the current).\n- Since the initial gain is proportional to gm1,2 (Av,init ≈ gm1,2·Zload, or equivalently gm1,2·t/C for the capacitive nodes), the initial gain increases.\n\n**Caveats:** The improvement saturates – once M7's on‑resistance becomes negligible compared with the impedance of the input pair, it behaves as an ideal switch and further widening adds little gain (it then only adds clock loading, capacitance on the tail node, and charge injection). Also, the larger tail current discharges P and Q faster, so the latch engages sooner; but at any given point in the initial phase, the differential gain is higher.\n\n**Bottom line:** increasing the width of M7 increases the initial voltage gain (sub‑linearly, saturating once M7 acts as a near‑ideal tail switch).",
        "format": "markdown",
        "sha256": "0c74eec9e584f3034bb609d3b7c6774a45058fa1b8ebefd4cd784119cf382f91"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gives the opposite trend. Although it correctly notes that widening M7 raises tail current and increases input-pair gm, it misses that gm grows only as the square root of current, so the initial gain factor gm/ICM decreases.",
          "golden_solution_sha256": "3be19d840ea0028f994c70cfd93497080016f88968540a82c98a00f03980212f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 10051,
        "total_tokens": 12579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 10051,
        "total_tokens": 12579,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9624,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial (pre‑regeneration) gain goes down.**\n\n**Why:** When CK goes high and S₁–S₄ open, the input pair M₁–M₂ steers its differential current (≈ gₘ₁,₂·ΔVᵢₙ) into the capacitances at P and Q. The differential \"seed\" voltage that the latch eventually amplifies is therefore\n\nΔV_PQ ≈ (gₘ₁,₂·ΔVᵢₙ·Δt) / C_P,Q\n\ni.e., the input signal is integrated onto C_P and C_Q. If these capacitances are made larger:\n\n- The same differential charge produces a **smaller differential voltage** at P and Q (ΔV ∝ 1/C), so the cross‑coupled latch (M₃–M) starts regenerating from a smaller initial difference — the initial voltage gain from Vᵢₙ to the latch nodes is reduced (roughly inversely proportional to the added capacitance).\n- In addition, P and Q fall more slowly, so M₃ and M₄ turn on later and the output difference at X and Y builds up more sluggishly, further eroding the gain available before positive feedback takes over.\n\n**Consequence:** the comparator regenerates from a weaker initial signal, so the decision takes longer and the output becomes more sensitive to latch offset/mismatch. In short, increasing C_P and C_Q **degrades (reduces) the initial voltage gain**.",
        "format": "markdown",
        "sha256": "f232a41c4e54c095d1f5784fa602a4d110c72364ddf9d9bf4b0d8f075c6a6e65"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The conclusion is opposite the golden result. Larger capacitance reduces the differential-voltage slope, but it also lengthens the pre-regeneration interval proportionally, so these effects cancel and the initial gain remains approximately unchanged; the answer misses that cancellation.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 10424,
        "total_tokens": 12952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 10424,
        "total_tokens": 12952,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10101,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**It decreases.**\n\nDuring the comparison phase (CK high), S₁–S₄ are off, so P and Q are high‑impedance nodes. The input pair M₁–M₂ converts the differential input voltage into a differential current that integrates on the capacitances at P and Q (which, through the triode‑region M₃–M₄, appear in parallel with the capacitances at X and Y). Hence the initial (pre‑regeneration) gain grows as\n\n|A_v| ≈ g_m1,2 · t / (C_P,Q + C_X,Y)\n\nIf the capacitance at P and Q is increased:\n\n- The same differential charge steered by M₁–M₂ produces a **smaller differential voltage** at P and Q (charge is shared onto a larger capacitance).\n- P and Q fall more slowly, so M₃–M₄ turn on more slowly and the output nodes X, Y develop their differential voltage more slowly.\n\nConsequently the initial voltage gain is reduced (roughly inversely proportional to the added capacitance), and the onset of regeneration is delayed, i.e., the comparator becomes slower. Only the subsequent regenerative (latch) gain of M₃–M₄/M₅–M₆ remains unchanged; the \"seed\" voltage handed to the latch at any given time is smaller.",
        "format": "markdown",
        "sha256": "855cd19f39de97a4c287b8f5bbee50ccfd4046408b0bedc3c143a077f0fbab58"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: the initial gain remains approximately unchanged because the longer amplification phase compensates for the slower voltage buildup. The answer correctly notes that larger capacitance slows the transient and delays regeneration, but misses that cancellation.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2528,
        "output_tokens": 10196,
        "total_tokens": 12724,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2528,
        "output_tokens": 10196,
        "total_tokens": 12724,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9903,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-008-initial-voltage-gain-increase-capacitance-at-nodes",
      "part": "part2",
      "question_number": 8,
      "question": "In the figure, what happens to the initial voltage gain if we increase the capacitance at nodes P and Q?",
      "figures": [
        "tasks/part2-008-initial-voltage-gain-increase-capacitance-at-nodes/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The initial voltage gain drops (it is reduced, roughly in inverse proportion to the added capacitance).**\n\n**Why:** Nodes P and Q are the drains of the input pair M₁–M₂. When CK goes high and the switches S₁–S₄ open, the differential input current g_m·ΔV_in has no resistive load to work into – it can only charge/discharge the capacitances sitting at P and Q. So the signal first appears as an integrated voltage:\n\nΔV_PQ(t) = (g_m1,2 · ΔV_in / C_P,Q) · t\n\nThis differential voltage between P and Q is exactly the \"seed\" signal that turns on M₃/M₄ unequally and hands the difference to the cross‑coupled regenerative latch (M₃–M₆), which then amplifies it into V_out.\n\nConsequences of increasing C_P,Q:\n\n- For a given input difference and a given time, the voltage difference developed at P and Q is smaller (ΔV = I·t/C), so the signal delivered to the latch – and hence the initial gain from V_in to V_out – is smaller. In effect the first stage is an integrator with gain g_m/(C_P,Q·s), so doubling the capacitance halves this gain.\n- Additionally, P and Q fall more slowly, so M₃/M₄ turn on later and regeneration starts later (larger delay), further reducing the gain available at the beginning of the comparison.\n\nSo adding capacitance at P and Q **degrades (lowers) the initial voltage gain** of the comparator, and also slows its response.",
        "format": "markdown",
        "sha256": "d56806c44d3668e66c975d55e5ca172c53f68f210dcad8222f4310d0101ad551"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The central conclusion is wrong: increasing the node capacitance does not reduce the initial gain. The answer correctly notes that the differential voltage develops more slowly and the comparator delay increases, but misses that the amplification interval lengthens proportionally, canceling the capacitance effect on initial gain.",
          "golden_solution_sha256": "181f6e0ce2e77c4df0e1602f9ce1b8891080eeecdff293462f41c7d6d66c5590",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 9653,
        "total_tokens": 12181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9301,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2528,
        "output_tokens": 9653,
        "total_tokens": 12181,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9301,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Speed degrades.**\n\nWhy:\n\n- **M5 and M6 hang directly on the critical nodes.** Their gates *and* drains are connected to X and Y. Widening them therefore adds both gate and drain capacitance to exactly the nodes whose voltage evolution determines the comparison time.\n\n- **They are useless during the critical initial phase.** When CK goes high and evaluation begins, X and Y are precharged to VDD, so VSG5 = VSG6 = 0: M5 and M6 are *off*. The initial discharge of P, Q (through M1, M2, M7) and then of X, Y (through M3, M4) must proceed with no help from the PMOS pair, yet it now has to move a larger capacitance. The initial differential voltage between X and Y therefore develops more slowly, and the latch starts regenerating later and from a smaller initial difference.\n\n- **The regeneration benefit is largely canceled.** Once latching begins, the growth rate of the differential is ≈ (gm3,4 + gm5,6)/C_X,Y. Increasing W5,6 raises gm5,6 but simultaneously raises C_X,Y (the very capacitance being switched), so the time constant improves little, if at all, while the pre‑regeneration delay has already been made worse. Near the onset of regeneration the partially‑on PMOS devices also oppose the fall of X and Y, further delaying latch activation.\n\n- **Their real job is only the final pull‑up.** M5/M6 mainly serve to restore the winning node to VDD after the decision. Making them wider speeds up only this non‑limiting final charging step, at the cost of slower decision making.\n\nSo, although a stronger PMOS pair charges the winning output to VDD faster, the added capacitive load on X and Y during the discharge/regeneration‑onset phase dominates, and the overall comparison speed **degrades** (delay increases). This is why M5 and M6 are normally kept relatively small in this dynamic comparator.",
        "format": "markdown",
        "sha256": "e4941d7727db7afd101892a7f51383f243315aad534439f5d9d80714e1df180e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the capacitance-versus-transconductance tradeoff, but incorrectly concludes the added capacitance dominates initially and mischaracterizes M5/M6 as mainly final pull-up devices. The correct trend is that stronger regeneration initially improves speed, with capacitance limiting the benefit at larger widths.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2527,
        "output_tokens": 13336,
        "total_tokens": 15863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2527,
        "output_tokens": 13336,
        "total_tokens": 15863,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12905,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Speed degrades (the comparator becomes slower).**\n\n**Why:**\n\n- **Role of M5–M6:** They form the cross‑coupled PMOS latch connected to nodes X and Y (the output nodes). During the critical first phase (CK high), X and Y must be *discharged* through M3/M4, M1/M2 and the tail device M7 until X or Y falls by |VTHP|, at which point the PMOS latch switches on and regenerates. Until that moment M5 and M6 are **off** – they contribute nothing except parasitic capacitance.\n\n- **Effect of widening them:** Larger W5, W6 means larger gate capacitance (on X and Y) and larger drain capacitance (on X and Y). Since the discharge current available from M1/M2–M7 is fixed, the sensing/discharge time t ≈ C_X,Y·ΔV/I grows directly with this extra capacitance. The latch therefore fires later.\n\n- **Little compensation during regeneration:** Once regenerating, the falling output is pulled down by the NMOS latch (M3–M4) and the tail‑limited input pair – widening M5/M6 does not help this side, it only adds load to it. The stronger pull‑up on the rising side gives at best a marginal gain, because the extra gm of M5/M6 is accompanied by proportionally extra capacitance on the same nodes (their own C/gm ratio), so the regeneration time constant barely improves while the discharge delay worsens.\n\n**Conclusion:** Increasing the widths of M5 and M6 mainly loads the high‑impedance nodes X and Y, delaying the onset of regeneration and slowing the falling output, so the overall comparison speed **degrades**. (Conversely, making them too small would slow the pull‑up/restoration of the high output, so in practice a modest, optimized size is used – but simply widening them from a properly sized design hurts speed.)",
        "format": "markdown",
        "sha256": "43d17c699cf54b76642300debc5460efb06a8f97cac43dbc1e4e5158b4781527"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It identifies the cross-coupled PMOS devices and a real capacitance penalty, but concludes that widening degrades speed. The golden solution says stronger regeneration dominates initially, so speed improves up to an optimum; the answer treats that benefit as negligible.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2527,
        "output_tokens": 10096,
        "total_tokens": 12623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2527,
        "output_tokens": 10096,
        "total_tokens": 12623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9679,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-009-increase-widths-m5-and-m6-speed-improve",
      "part": "part2",
      "question_number": 9,
      "question": "If we increase the widths of M5 and M6 in the figure, does the speed improve or degrade?",
      "figures": [
        "tasks/part2-009-increase-widths-m5-and-m6-speed-improve/figure-09.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Speed improves (at least up to a point).**\n\n**Why:** M5 and M6, together with the cross‑coupled NMOS pair M3–M4, form the regenerative (positive‑feedback) latch at nodes X and Y. Once CK goes high and the input pair creates a small imbalance between X and Y, this latch amplifies it with a time constant roughly τ ≈ C_XY/(gm3 + gm5 + gm4 + gm6). Making M5 and M6 wider increases their transconductance, which:\n\n- strengthens the positive feedback, shrinking the regeneration time constant, so the latch resolves faster, and\n- pulls the \"winning\" output node up to V_DD more quickly once the decision starts.\n\nSo the comparison/latching delay becomes shorter — the circuit gets faster.\n\n**Caveat (the trade‑off):** Widening M5 and M6 also adds gate and drain capacitance to nodes X and Y. This extra capacitance slightly slows the initial phase (the discharge of X and Y by M1–M4 before regeneration kicks in) and makes the precharge through S3–S4 take longer. Hence the speed benefit saturates, and if M5 and M6 are made excessively large the capacitive loading eventually cancels the gain in gm. But the first‑order effect of increasing their widths is a **faster (improved‑speed) circuit**, at the cost of more power/area and heavier loading of X and Y.",
        "format": "markdown",
        "sha256": "e0484339d8a07ff8b365ef2198b1f173d1bcd669495d0691fdeba47c9e9d3d07"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies M5/M6 as regenerative devices and explains that their increased strength initially improves speed, while added capacitance eventually limits the benefit.",
          "golden_solution_sha256": "5eed0194a609e5504312082df6fe7d71e18f6abfa8d0ff1bc1936ac8f33e2388",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2527,
        "output_tokens": 11096,
        "total_tokens": 13623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2527,
        "output_tokens": 11096,
        "total_tokens": 13623,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed degrades.**\n\nAlthough widening the clocked (CK/CK̄‑gated) transistors lowers their on‑resistance, in this latch‑based (C²MOS) divide‑by‑two loop the penalties dominate:\n\n- **Loading of nodes X and Y:** The drains of the clocked devices sit directly on nodes X and Y, the nodes whose settling time within each half‑clock period sets the maximum operating frequency. Wider devices add diffusion/overlap capacitance to exactly these nodes, increasing the time constant that must be met every cycle. The benefit is also diluted because the clocked devices remain in series with the (unwidened) input transistors (the M₁ stack), so the total path resistance does not fall proportionally.\n- **Loading of the clock:** The gates of the clocked transistors are tied to the global CK and CK̄ lines. Making them wider heavily loads the clock buffers/distribution, slowing the clock edges (which shrinks the effective transparency windows) and increasing skew and power.\n- **Feedthrough onto dynamic nodes:** During hold, X and Y are dynamic (floating) nodes. Larger clocked devices couple more clock feedthrough/charge injection onto these storage nodes, eroding the noise margin and further limiting usable speed.\n\nSo the intuitive \"wider = more drive = faster\" argument fails here: the extra capacitance placed on X, Y and on the clock phases outweighs the reduction in on‑resistance, and the circuit's maximum clock frequency goes **down** (there is only a small optimum width; beyond it, widening hurts).",
        "format": "markdown",
        "sha256": "10d992012ac6ee591ca1dcc4f3900436355f09ebd3d87d67ab263473af2854a1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer recognizes the resistance–capacitance tradeoff and mentions an optimum, but its stated conclusion is that widening degrades speed. The golden solution requires recognizing that widening improves speed initially before added capacitance limits or reverses the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1708,
        "output_tokens": 8074,
        "total_tokens": 9782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7734,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1708,
        "output_tokens": 8074,
        "total_tokens": 9782,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7734,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Speed degrades.**\n\n**Why:** This loop (two C²MOS inverters plus Inv₃, with Z fed back to the first stage) is a C²MOS toggle divider. In each C²MOS stage the clocked transistors act only as *series switches* in the charge/discharge path of the internal nodes X and Y. Widening them therefore helps only in a very limited way and hurts in several stronger ways:\n\n- **Resistance benefit saturates:** The clocked device is in series with the input transistor M₁. No matter how wide the clocked transistor becomes, the stack resistance can never fall below the on‑resistance of M₁, so the gain in drive strength quickly diminishes.\n- **Capacitance on the critical nodes grows linearly:** The drain junctions of the clocked transistors sit on nodes X and Y — the very nodes that must be charged/discharged every half cycle and that store the state while the stage is off. Making the clocked devices wider increases the capacitance on these nodes, increasing the RC time constant of the loop.\n- **Clock loading:** The gates of the clocked transistors are the load on CK and CK̄. Wider devices slow the clock edges, and slower clock edges directly delay the turn‑on of the stages and limit the maximum clock frequency of the divider.\n- **Charge injection/clock feedthrough:** Larger clocked transistors inject more charge onto the floating nodes X and Y at the clock edges, eroding the stored‑value margin and further limiting usable speed.\n\n**Conclusion:** Increasing the widths of the clocked transistors adds more capacitance (on X, Y, and the clock phases) than the resistance it removes, so the overall speed **degrades**. If more speed is needed, the effective knob is to widen the data‑path transistors (M₁ and Inv₃), not the clocked switches.",
        "format": "markdown",
        "sha256": "91061b7ba864233842ca4a0e5ac7dfb0810595f5a07dc06b67750cf86b654a28"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "The answer correctly identifies the series clocked devices and the added capacitance at X and Y, but it concludes that widening them degrades speed. The required trend is that lower on-resistance improves speed initially, with capacitance limiting or reversing the benefit only at larger widths.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1708,
        "output_tokens": 13990,
        "total_tokens": 15698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13579,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1708,
        "output_tokens": 13990,
        "total_tokens": 15698,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13579,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-010-speed-improve-or-degrade-increase-widths-clocked",
      "part": "part2",
      "question_number": 10,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-010-speed-improve-or-degrade-increase-widths-clocked/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Speed degrades.**\n\nThis loop (two C²MOS clocked inverters plus Inv₃, i.e., a latch‑based divider/flip‑flop) has its speed set by the time constants at the internal nodes X and Y: during each clock phase, the output node must be charged/discharged through the *series stack* of an input transistor and a clocked transistor.\n\nIf the clocked transistors are made wider:\n\n- **Their drain capacitances land directly on the critical nodes X and Y** (and their source/drain capacitances also load the internal series nodes between the input and clocked devices). These capacitances grow linearly with width.\n- **The resistance benefit saturates quickly**, because the clocked device is only part of the series path – the unchanged input transistors (M₁ and the input PMOS) still contribute their full on‑resistance. So the stack resistance drops only slightly, while the node capacitance keeps rising.\n- **The clock phases CK and CK̄ see a larger capacitive load**, slowing the clock edges that control evaluation, which further eats into the available time.\n\nThus the RC time constant at X and Y (which limits the maximum clock frequency) increases: the extra capacitance injected onto the swinging/storage nodes outweighs the small reduction in on‑resistance. Consequently, increasing the widths of the clocked transistors **degrades the speed** (only a very modest upsizing, just enough to balance the series resistances, would be neutral; beyond that the circuit slows down).",
        "format": "markdown",
        "sha256": "977e00b67cc90c927e4eaca84e778547c475a5b62d8856dd870e21fff3333f7e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes the series paths and added node capacitance, but concludes that widening the clocked transistors degrades speed. The expected trend is that lower on-resistance improves speed initially, with added capacitance limiting or eventually reversing the benefit.",
          "golden_solution_sha256": "93d9b522d441668a699cc09168ad1991cf00bb982a5ad716cae0b7c7bec7c4fd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1708,
        "output_tokens": 10143,
        "total_tokens": 11851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1708,
        "output_tokens": 10143,
        "total_tokens": 11851,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9812,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** This circuit is a divide‑by‑2 loop built from two clocked inverters (the left stack is transparent when CK = 1, the right stack when CK = 0) plus Inv₃, and it naturally generates two fCK/2 signals in phase quadrature.\n\n**Why:**\n\n- The first clocked inverter updates node **X** only on the **rising edges** of CK (it holds X otherwise).\n- The second clocked inverter updates node **Y** (and hence **Z** = Y̅ through Inv₃) only on the **falling edges** of CK.\n- Both X and Y (and Z) therefore toggle once per clock cycle, i.e., they run at fCK/2 with period 2TCK, but their transitions are displaced by TCK/2.\n- A time offset of TCK/2 relative to an output period of 2TCK corresponds to 360°·(TCK/2)/(2TCK) = **90°**.\n\nSo X and Y (or equivalently X and Z, since Z is just the complement of Y) form a quadrature pair at half the clock frequency: e.g., I = X, Q = Z, with I̅ and Q̅ also available.\n\n**Caveats:**\n\n- Node X is a dynamic (held) node—it is only driven during one clock phase—so it should be buffered before being used as an output.\n- The 90° spacing is set by the interval between the rising and falling clock edges, so the quadrature phase accuracy depends on CK having a 50% duty cycle (duty‑cycle error translates directly into phase error).\n\nIn summary, unlike a simple latch‑based divider that only gives 0°/180° outputs, this topology inherently provides quadrature outputs at nodes X and Y/Z.",
        "format": "markdown",
        "sha256": "7e4d789f96c57f59aeb0fa24eba8319117a1dc7293b219eb7d08100aef053c7f"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from the latches switching on opposite clock phases, but misses both causes of non-exact quadrature: Inv3 delay and unequal loading of the latch outputs.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1692,
        "output_tokens": 5919,
        "total_tokens": 7611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1692,
        "output_tokens": 5919,
        "total_tokens": 7611,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5513,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** The circuit is a loop of two clocked‑inverter latch stages (plus Inv₃) that operates as a ÷2 circuit, and its two internal nodes naturally sit in quadrature.\n\n**Why:**\n\n- **Left stage:** The series PMOS/NMOS pair gated by CK/CK̄ makes this stage transparent only when CK is high; while transparent it acts as an inverter from Z to X (X = Z̄). When CK is low, X holds its value.\n- **Right stage:** Its switching pair is gated by CK/CK̄ in the opposite sense, so it is transparent only when CK is low, acting as an inverter from X to Y (Y = X̄); when CK is high, Y holds.\n- **Loop behavior:** With Z = Ȳ fed back, the loop must toggle once per clock cycle: X changes state on the rising edge of CK, and Y changes state on the falling edge. The result is that X, Y, and Z all oscillate at fCK/2 (period 2TCK).\n- **Phase relationship:** Since X updates on one clock edge and Y on the opposite edge, they are offset by TCK/2. Referred to the output period (2TCK), this offset is (TCK/2)/(2TCK) = 1/4 cycle, i.e., **90°**.\n\nSo X and Y are equal‑frequency (fCK/2), 50%‑duty‑cycle signals separated by 90°, and Z = Ȳ supplies the 270° phase (an inverter on X would give 180°). In other words, like a master–slave flip‑flop divider tapped at both latch outputs, this structure does provide quadrature outputs.",
        "format": "markdown",
        "sha256": "c216e935d6ff902901c8da4eb66fb2b660569ab918af23a83b62f627685b7298"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly identifies nominal divide-by-two quadrature from opposite-edge switching, but treats the phase relationship as exact and omits both the Inv₃ delay and unequal latch loading that make it non-ideal.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1692,
        "output_tokens": 6879,
        "total_tokens": 8571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1692,
        "output_tokens": 6879,
        "total_tokens": 8571,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6489,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-011-structure-provide-quadrature-outputs",
      "part": "part2",
      "question_number": 11,
      "question": "Does the structure in the figure provide quadrature outputs?",
      "figures": [
        "tasks/part2-011-structure-provide-quadrature-outputs/figure-10.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Yes.** This loop is a divide‑by‑two circuit that inherently generates quadrature phases at fCK/2.\n\n**Why:**\n\n- Each half of the circuit is a clocked inverter‑like stage: the left stage (driven by Z through its top PMOS and bottom NMOS M1) can only update node **X while CK is high** (its complementary PMOS/NMOS switches conduct on CK̄/CK), and it holds X otherwise. The right stage (driven by X) can only update node **Y while CK is low**, since its switches are clocked with CK/CK̄ in the opposite sense. Inv3 then returns Z = Ȳ to close the loop.\n- The three inversions around the loop (left stage, right stage, Inv3) force the loop state to flip once per clock cycle, so X, Y, and Z all toggle at **fCK/2**.\n- Because X is refreshed on one edge of CK and Y on the opposite edge, their transitions are separated by TCK/2. Since the output period is 2·TCK, a half‑clock offset equals **90° of the output period**. Hence X and Y (and Z = Ȳ) are in quadrature.\n\n**Resulting outputs:** X (I), Y (Q, shifted 90° from X), and Z = Ȳ (Q̄); adding a single inverter on X would give the full complementary quadrature set (I, Ī, Q, Q̄) at half the clock frequency.\n\nSo the structure does provide quadrature outputs: it is a quadrature divide‑by‑2 circuit, with the quadrature relationship arising from the two stages being clocked on opposite phases of CK.",
        "format": "markdown",
        "sha256": "b1709c197366a06435f635d47df78bff4e80cef5cd85073146568516eb9b429d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly identifies the nominal divide-by-two quadrature relationship from the opposite-phase latch timing, but omits why the outputs are not exactly in quadrature: Inv3 delay and unequal latch loading.",
          "golden_solution_sha256": "a208e36107d3c6d3d835e897ccf309733e82f6921b41cd2eef1a21949e70e6f6",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1692,
        "output_tokens": 7010,
        "total_tokens": 8702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6631,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1692,
        "output_tokens": 7010,
        "total_tokens": 8702,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6631,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Answer: It degrades (after at best a very marginal initial gain), so widening the clocked devices is not an effective way to speed this circuit up.**\n\n**Why:**\n\nThe circuit is a loop of two clocked (C²MOS) inverters plus an output inverter (a master–slave storage loop / toggle divider). The CK‑ and CK̄‑driven transistors are only *series switches*; the actual gain stage is formed by the inner, data‑driven transistors. Increasing the width of the clocked transistors therefore brings the following:\n\n- **On‑resistance benefit saturates quickly.** The clocked device's resistance is in series with the inner transistor's resistance, and the load capacitance (gate of the next stage) is unchanged. Once the clocked device's resistance is a small fraction of the stack resistance, making it wider buys almost nothing.\n\n- **Clock loading grows linearly.** Every clocked transistor's gate capacitance hangs on the CK/CK̄ lines. Wider devices slow the clock edges, which delays and softens the turn‑on of the stacks (and lengthens the interval during which master and slave are both partially on, causing contention). Since the circuit's maximum rate is set by how fast the loop settles within each clock phase, slower clock edges directly cut the speed.\n\n- **Internal‑node capacitance grows.** The drain/source diffusions of the clocked devices sit on the internal series nodes between the clocked and inner transistors. These nodes must be charged/discharged on every transition, and when an inner transistor is on, this extra diffusion capacitance is effectively added to the storing node, increasing the Elmore delay of the stack.\n\n- **Charge injection and clock feedthrough increase.** Both scale with width, disturbing the charge stored on the dynamic nodes and eroding the settling margin at high frequency.\n\n**Net effect:** the resistance reduction gives diminishing returns while the capacitive penalties (clock line, internal nodes) and charge injection grow proportionally with width. Hence, beyond a modest optimum size, increasing the widths of the clocked transistors **degrades the speed**; the proper way to speed up the loop is to size the inner (data‑path) transistors and the output inverter, keeping the clocked switches relatively small.",
        "format": "markdown",
        "sha256": "f2c8fee3190df84c79b5427777e6c04935a207ad0424381c2ec2a02c1965c628"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer gets the central trend wrong: widening the clocked transistors improves speed considerably because their lower on-resistance helps while their added capacitance has little effect on the data path. It recognizes the series-resistance benefit but incorrectly treats clock and internal-node capacitance as dominant; it does not identify charge sharing as the acceptable limiting effect.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 3434,
        "output_tokens": 26296,
        "total_tokens": 29730,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 25320,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1717,
        "output_tokens": 13148,
        "total_tokens": 14865,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12660,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the speed improves – but only up to a point, after which further widening hurts.**\n\n**Why it improves:**\nThis loop (two C²MOS clocked inverters plus the static inverter, i.e., a C²MOS latch/divider stage) switches by charging and discharging the internal nodes during each clock phase. When a branch is enabled, the current that charges/discharges the internal node must flow through *two* series devices: the middle (data) transistor **and** the clocked transistor (the PMOS at V_DD or the NMOS at ground). The time constant is therefore roughly (R_on,data + R_on,clock)·C_node. Widening the clocked transistors lowers their on‑resistance, so the internal nodes settle faster during the transparent phase, and the circuit can be clocked faster. In this sense the clocked devices are in the critical path, and making them stronger speeds up the latch.\n\n**Why the improvement saturates / can reverse:**\n- The gates of the clocked transistors are the load on the CK/CK̄ drivers. Making them wider slows the clock edges (unless the clock buffer is also resized), and slow clock edges shorten the effective \"fully‑on\" window and increase the time when both branches partially conduct, which corrupts the state at high frequency.\n- The drain parasitics of the clocked transistors (at the internal series nodes) grow with width; these capacitances must also be charged/discharged through the middle transistors, adding to the delay and to the capacitance of the storing nodes.\n- Wider clocked devices also increase leakage and power, degrading charge retention on the dynamic nodes at low frequency.\n\n**Conclusion:** Increasing the widths of the clocked transistors initially **improves** speed (lower series on‑resistance in the charging/discharging path), but because of the added clock loading and parasitic capacitance the gain diminishes, and beyond an optimum width the speed **degrades**. So there is an optimum size for the clocked transistors.",
        "format": "markdown",
        "sha256": "167f55c0cd93fa268de5705fec7345124bffe469292a6e9288c7ae53764df09c"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "Correctly says widening initially improves speed by lowering clocked-device on-resistance. However, it omits the key charge-sharing effect and acceptable swing degradation, and overstates clock loading and parasitics as causes of a speed reversal.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 3434,
        "output_tokens": 23794,
        "total_tokens": 27228,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 22904,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1717,
        "output_tokens": 11897,
        "total_tokens": 13614,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11452,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-012-repeat-question-10-for-topology",
      "part": "part2",
      "question_number": 12,
      "question": "In the circuit shown in the figure, does the speed improve or degrade if we increase the widths of the clocked transistors?",
      "figures": [
        "tasks/part2-012-repeat-question-10-for-topology/figure-11.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**The speed degrades.**\n\nThis circuit is a latch‑based divide‑by‑two (a master–slave loop built from two clocked inverters plus an output inverter), and its internal states are stored dynamically on the capacitances of the middle nodes. Widening the clocked (CK/CK̄) transistors hurts more than it helps:\n\n- **Added capacitance on the critical nodes.** The drains of the clocked transistors sit on the internal nodes of each stack. Whenever the corresponding input (middle) transistor is conducting, this parasitic capacitance hangs directly on the node that stores/drives the state. Making the clocked devices wider therefore increases the capacitance that must be charged, discharged, and overwritten every clock cycle, lengthening the settling time of the latch.\n\n- **Charge injection and clock feedthrough.** At the clock edges, the switching clocked transistors inject charge and couple clock transitions through their overlap capacitances into the dynamic storage nodes (through the conducting middle devices). Wider clocked transistors mean larger injected charge, which disturbs the stored value and eats noise margin, forcing longer resolution time.\n\n- **Loading of the clock driver.** The gate capacitance of the clocked transistors appears directly on CK and CK̄. Widening them slows the clock edges themselves, shrinking the effective transparent window of the latches and limiting the maximum clock frequency.\n\n- **Diminishing return on resistance.** Lowering the on‑resistance of the clocked devices gives only a marginal benefit, because the series resistance of the (unscaled) middle transistors remains, and the R·C product of the clocked device's own drain parasitic with its own on‑resistance stays roughly constant as W increases.\n\nSo, although wider clocked transistors conduct better, the extra parasitic capacitance on the storage nodes, the greater charge injection, and the heavier load on the clock buffer dominate — the overall speed of the latch/divider **degrades** (beyond a small optimal size).",
        "format": "markdown",
        "sha256": "57a8373632faf4349dae8a6329127651c3a24239deb53d71a3ddfcb9f9130218"
      },
      "model_call_count": 2,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer concludes that speed degrades, contrary to the key result: widening the clocked transistors lowers series resistance while adding little loading to the data path. Its loading and charge-injection concerns do not support the topology’s actual speed trend.",
          "golden_solution_sha256": "318c27e5f5623103c64ba9716043fb25f88281b2efa86f52761064364631036f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 3434,
        "output_tokens": 29840,
        "total_tokens": 33274,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 28984,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1717,
        "output_tokens": 14920,
        "total_tokens": 16637,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14492,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 2,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## What the circuit is\n\nThe figure shows a **single closed loop (ring)** containing, in series:\n\n* switch controlled by **CK** → **Inv₁** → switch controlled by **CK̄** → **Inv₂** → **Inv₃** → back (through the bottom wire) to the first switch.\n\nSo the ring contains **three inverting stages** and **two clock‑controlled switches**, driven by complementary phases of the clock.\n\n## Key structural observation\n\n* A loop with an **odd number of inverters** that is fully closed has no stable state – it is a **ring oscillator** (f ≈ 1/6·t_inv per stage).\n* Here the two switches are driven by **complementary clocks**, so exactly **one switch is on at any time**; the ring is *never* closed. Instead, each clock phase cuts the ring into an open chain, and the state survives on the **parasitic capacitance of the floating (disconnected) node** – i.e. the circuit is a **dynamic** storage loop, not an oscillator.\n\n## Phase‑by‑phase operation\n\nLet n₁ = input of Inv₁, n₃ = input of Inv₂ (the two switchable nodes), n₅ = output of Inv₃ (= feedback node).\n\n| Phase | Switches | What happens |\n|---|---|---|\n| CK = 1 | CK‑switch ON, CK̄‑switch OFF | n₃ floats (stores bit). Its value propagates n₃ → Inv₂ → Inv₃ → n₅ → n₁ (two inversions ⇒ n₁ = n₃). n₁ is refreshed. |\n| CK = 0 | CK‑switch OFF, CK̄‑switch ON | n₁ floats (stores bit). Its value propagates n₁ → Inv₁ → n₃ (one inversion ⇒ n₃ = n̄₁). n₃ is refreshed. |\n\nRound trip per clock period: n₁ → n₃ = n̄₁ → n₁(new) = n̄₁(old).\n\n## Function of the arrangement\n\n* The stored bit circulates once around the loop per clock period and acquires **one net inversion** (odd number of inverters), so the state **complements every cycle**: the circuit is a **toggle (T) flip‑flop / divide‑by‑2 counter**. Any node gives a square wave at f_CK/2.\n* Storage is **dynamic**: during CK = 1 the information lives on node n₃, during CK = 0 on node n₁; the inverters refresh it each half‑period. Hence the clock must keep running (leakage limits how long the bit survives), which is the usual constraint of dynamic logic.\n* The complementary switches are essential: if CK and CK̄ ever overlapped (both switches on), the three‑inverter ring would close and briefly oscillate/contend; if both were off (dead time), both storage nodes would float at once. Ideal complementary clocks keep exactly one switch closed, giving clean half‑period transfer and refresh.\n\n**Summary:** the arrangement is a clocked, dynamic, one‑bit ring loop (three inverters + two complementary clock switches). Because the switches prevent the odd‑inverter ring from ever closing, it does not oscillate; instead it transfers and inverts the stored bit once per clock cycle, behaving as a dynamic toggle flip‑flop (frequency divider by 2).",
        "format": "markdown",
        "sha256": "c3a82cbd8a8af4c09710b2e1fdc7d92e65c506654ba249125a13d8eae5878f4d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic toggle/divide-by-two circuit. The additional phase-by-phase details are not required by the golden solution.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 9717,
        "total_tokens": 10814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 9717,
        "total_tokens": 10814,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8974,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Topology\n\nTracing the wires shows a **single closed ring** (no external input or output):\n\nnode A → switch *CK* → inverter Inv₁ → node B → switch *CK̄* → inverter 2 → inverter 3 → (bottom feedback wire) → node A.\n\nSo the loop contains **three inverters (an odd number of inversions)** and **two series switches driven by complementary clock phases** (when *CK* = 1, the *CK̄* switch is open, and vice‑versa). The only \"memory\" elements are the gate capacitances of the nodes that get disconnected when a switch opens.\n\n## Operation phase by phase\n\n**Phase CK = 1 (CK̄ = 0):** CK closed, CK̄ open.\n- Inv₁'s input follows node A, so B = Ā.\n- The input of Inv₂ is floating; its stored charge keeps node A at its old value during this phase.\n- Net effect: the complement of the present state is prepared at node B.\n\n**Phase CK = 0 (CK̄ = 1):** CK open, CK̄ closed.\n- Inv₁'s input now floats, holding node B at the value just written.\n- Inv₂ and Inv₃ propagate B to node A: A = B̄̄ = B.\n- Net effect: the state of the ring is updated, A ← B = Ā(old).\n\n**Result over one full clock period: A ← Ā.** The state flips once per clock cycle, so the node voltages (e.g., the output of the last inverter) form a square wave at **f_CK / 2**. The circuit is therefore a **two‑phase dynamic toggle stage (divide‑by‑2 counter / dynamic T flip‑flop)**: the odd number of inverters supplies the required sign inversion around the loop, and the complementary switches perform the two‑step (master–slave‑like) transfer that prevents race‑through.\n\n## Remarks / design caveats\n\n- **Storage is dynamic.** When a switch is open, the information lives only as charge on parasitic capacitance; the clock must keep running (and leakage limits retention), unlike a static latch.\n- **Clock overlap is fatal.** If both switches were ever closed at the same time, the ring would contain 3 inversions with a closed loop – a statically unstable condition – and would behave as a **ring oscillator** (f ≈ 1/(6·t_p) for gate delay t_p). Hence the phases must be complementary (ideally non‑overlapping).\n- **Clock dead time is harmless.** If both switches are momentarily open, the loop is simply frozen and the state is held on the floating nodes.\n\n**Summary:** the arrangement is a three‑inverter ring interrupted by two complementary clocked switches; it never oscillates as a ring oscillator but, by alternately sampling and transferring the state on the two clock phases, it toggles once per clock period – i.e., it works as a dynamic frequency divider by two (toggle flip‑flop).",
        "format": "markdown",
        "sha256": "6964b6690a09f7af72c3126b40cbfe047eb780950486aa1fdc89922783b4484e"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic divide-by-two and explains alternating clocked sampling/transfer producing an output at half the clock frequency, satisfying the golden solution’s full-credit rule.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1097,
        "output_tokens": 5988,
        "total_tokens": 7085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1097,
        "output_tokens": 5988,
        "total_tokens": 7085,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 5328,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-013-dynamic-latch-divide-by-two",
      "part": "part2",
      "question_number": 13,
      "question": "Analyze the arrangement in the figure.",
      "figures": [
        "tasks/part2-013-dynamic-latch-divide-by-two/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Topology\n\nThe circuit is a **single closed loop** (no external signal inputs, only the clock):\n\nnode X → switch *CK* → inverter Inv₁ → switch *CK̄* → inverter 2 → inverter 3 → (feedback wire) → back to X.\n\nSo the ring contains **three inverters (an odd number of inversions)** and **two switches driven by complementary clock phases**.\n\n## Key structural observations\n\n- Because *CK* and *CK̄* are complementary, **exactly one switch is closed at any time**; a conducting DC loop never exists. Hence the circuit is neither a static latch (which would need an even number of inverters in a permanently closed loop) nor a free‑running ring oscillator (which would need both switches closed).\n- Operation is therefore **dynamic**: information is temporarily stored on the parasitic (gate) capacitance of the node left floating by the open switch.\n- Inv₂ + Inv₃ form a non‑inverting buffer; the **only inversion in the loop is Inv₁**, i.e. the feedback is inverting.\n\n## Phase‑by‑phase operation\n\nLet W = state stored at the input of Inv₂, Y = input of Inv₁.\n\n| Phase | Closed switch | What happens |\n|---|---|---|\n| CK = 1 | CK | W is floating (holds charge). W is buffered through Inv₂–Inv₃ and the feedback wire to X, so Y = W and Inv₁ prepares Z = W̄ at the open CK̄ switch |\n| CK = 0 | CK̄ | Z is transferred onto W: W ← W̄. Now Y floats, holding its value and keeping Z stable. Output U = buffer(W) = W |\n\nNet effect per clock period: **W ← NOT W**. The state inverts once every clock cycle.\n\n## Conclusion – function of the arrangement\n\n- The circuit is a **dynamic toggle stage (T flip‑flop / divide‑by‑2 cell)**: equivalently, a one‑bit two‑phase dynamic shift register (switch+inverter pairs) closed on itself with an odd number of inversions. Any node of the loop delivers a square wave at **f = fCK / 2**.\n- **Dynamic storage:** the bit exists only as charge on the floating gate nodes; the clock must keep running to refresh it, otherwise the data is lost by leakage.\n- **Timing caveat:** if the two switches were ever closed simultaneously (clock overlap), the three‑inverter ring would close and oscillate (contention/glitches); correct operation assumes break‑before‑make switching. During non‑overlap gaps (both open) the state is simply held.\n- With an even number of inverters the same arrangement would instead act as a bistable storage loop; the odd inversion count is precisely what makes it toggle.",
        "format": "markdown",
        "sha256": "e7e7f2d068a34418b624f050cf95148ed0321f2ee31bd8653d41195943525ab1"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies the arrangement as a dynamic divide-by-two circuit with output frequency half the clock frequency. The extra internal-path details are not required for full credit.",
          "golden_solution_sha256": "f425c26bf4178562557e147f38673688c0fa91f97a1c7cad9ab3d6417d10545f",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 8137,
        "total_tokens": 9234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1097,
        "output_tokens": 8137,
        "total_tokens": 9234,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 7522,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What Inv₁ is doing in this loop.** The black path is a clocked (switched‑inverter) ring: three inverters with two switches in series, driven by CK and CK̄, so the loop is interrupted whenever a switch is open. The red inverter Inv₁ is *not* clocked – it is permanently connected from the input node of the first switch to the output node of the first inverter, i.e., it forms an always‑on feedback path around the clocked stage. Its presence changes the behavior (and the performance) in several ways:\n\n**Benefits (robustness):**\n- **State retention / keeper function.** When the clocked switches are open, the internal nodes would otherwise be left floating (pure dynamic storage). Inv₁ provides a DC path that keeps these nodes at a defined logic level, so the stored state is not destroyed by leakage or charge sharing during long \"off\" periods (low clock rate, high temperature).\n- **Reliable start‑up/resumption.** Because the loop never loses its state, the ring resumes oscillating (or the latch resumes sampling) deterministically after each switching event; the circuit cannot settle into a degenerate/metastable bias point when the switches open.\n- **Glitch/undefined‑level suppression** at the inputs of the following stages, since no node is ever left high‑impedance for a full phase.\n\n**Costs (speed, power, noise):**\n- **Reduced speed / oscillation frequency.** Inv₁'s gate capacitance loads the feedback node (output of the last inverter) and its output capacitance loads the node between the first inverter and the CK̄ switch. Both are critical loop nodes, so the delay per pass increases and the maximum clock rate / free‑running frequency drops.\n- **Contention current and extra power.** During transitions, Inv₁ and the clocked inverter drive the same node through paths with different delays (switch resistance + inverter delay vs. the direct Inv₁ path). The resulting momentary fight produces short‑circuit current and can skew or glitch the edges → higher dynamic power.\n- **Added jitter/phase noise.** The contention and the asymmetric loading of the two loop paths modulate the edge times, degrading timing precision (phase noise if the ring is used as an oscillator).\n- **Softened gating.** Because Inv₁ bypasses the first switch, the loop is never completely \"dead.\" In applications like a gated‑ring‑oscillator TDC, this weakens the on/off contrast (some activity can persist in the \"off\" phase), which must be accounted for in the design.\n\n**Net effect / trade‑off.** Inv₁ buys robustness (leakage immunity, state retention, guaranteed start‑up) at the price of speed, power, and some jitter. For this reason it is normally sized *weak* (small W or long L): strong enough to overcome leakage and hold the node, but weak enough that its capacitive loading and contention with the clocked inverter keep the speed and power penalty small.",
        "format": "markdown",
        "sha256": "7c1cbb58bd602d4fc30c91bbf59bab8833dd9b20257ca0914e2fd888ff57a73a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes that the red inverter is unclocked and bypasses the first switch, but miscasts it as a keeper and gets the central performance tradeoff backwards: the feedforward path improves high-speed operation, while its unclocked loop raises the minimum usable clock frequency at low rates.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 950,
        "output_tokens": 11003,
        "total_tokens": 11953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 950,
        "output_tokens": 11003,
        "total_tokens": 11953,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10359,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What Inv₁ does topologically.** The red inverter is connected from the left (feedback) node to the node between the first black inverter and the $\\overline{CK}$ switch – i.e., it sits *in parallel with the CK‑switched inverter* and provides a permanent, clock‑independent path around the first clocked stage. Everything about its \"performance effect\" follows from that:\n\n**1. It keeps the feedback loop closed even when the clocked switch is off (loop parity / function).**\nWith the $\\overline{CK}$ switch closed, the loop is Inv₁ → inverter → inverter → back to the input node: three inversions, i.e. an *odd* number. So the closed loop is a negative‑feedback ring (it regenerates/oscillates) rather than a high‑impedance, dynamically stored node. In other words, Inv₁ determines the behavior of the loop: without it the node would be left floating (dynamic storage) when the switches open; with it, the loop is always active. If the circuit is meant to be a latch, Inv₁ destroys the hold state (race/oscillation); if it is meant to be a gated ring oscillator, Inv₁ is the stage that guarantees the loop closes with odd parity so oscillation is sustained.\n\n**2. Delay / frequency.**\nInv₁ adds one gate delay to the feedback loop. As an oscillator, the period becomes $T = 2\\,N\\,t_p$ with $N = 3$ (Inv₁ plus the two inverters), so inserting Inv₁ lengthens the period by $2t_{p,\\text{Inv1}}$ and lowers the oscillation frequency. As a timed storage element, it adds a always‑active path that the signal must settle against, effectively limiting how fast the node can be re‑driven by the clocked branch.\n\n**3. Loading and power.**\nInv₁ presents its gate capacitance to the feedback node and its output capacitance to the middle node. That extra load slows the transitions of the CK‑switched inverter and increases dynamic (switching) power. On the other hand, when CK is on, Inv₁ drives in parallel with the clocked inverter, which strengthens the drive on the middle node (faster edges) – but during clock overlap/skew, when both the clocked path and Inv₁ are active, the two drivers can fight, producing short‑circuit (contention) current and extra power dissipation.\n\n**4. Robustness (the benefit).**\nBecause Inv₁ never turns off, the internal node is never left in a high‑impedance state. The stored/driven value is actively regenerated instead of relying on parasitic capacitance, so the circuit is immune to leakage, charge sharing and noise during switch non‑overlap – at the price of the static/short‑circuit power and the extra delay noted above.\n\n**Bottom line.** The red inverter trades speed and power for robustness: it closes the loop independent of the clock (adding an odd inversion, which makes the closed loop regenerative/oscillatory instead of a floating dynamic node), adds one stage of delay and capacitive load (lowering the maximum frequency / setting the ring's frequency), and increases power consumption, while eliminating floating nodes and making the circuit insensitive to switch off‑time and clock non‑overlap.",
        "format": "markdown",
        "sha256": "fb6b50d28ae07c3d19bcde0d9e549209004cf9ae34a35acfc14f3c7aee106c45"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It recognizes an unclocked path and a possible three-inversion oscillatory loop, but misstates the connection and reverses the key performance effect: the feedforward path improves high-speed operation, while its low-frequency interference raises the minimum usable clock frequency. The answer instead says it reduces maximum speed and eliminates floating-node limitations.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 950,
        "output_tokens": 12371,
        "total_tokens": 13321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 950,
        "output_tokens": 12371,
        "total_tokens": 13321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11655,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-014-red-inverter-b-affect-performance",
      "part": "part2",
      "question_number": 14,
      "question": "How does the red inverter in the figure affect the performance?",
      "figures": [
        "tasks/part2-014-red-inverter-b-affect-performance/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**What Inv₁ actually does topologically:** its input is tied to the node *before* the CK switch and its output to the node *after* the first black inverter. In other words, it is a permanent (always‑on) path in parallel with the series combination \"CK switch + inverter,\" i.e., it closes a feedback loop (Inv₁ → 3rd inverter → 4th inverter) that the clocked switch is supposed to open and close.\n\n**Consequences for performance:**\n\n- **It destroys the isolation provided by the CK switch.** When CK is off (CK̄ on), the loop is supposed to be broken at the first switch so that the sampled value is held on the internal node. Because Inv₁ still connects the two nodes, a three‑inverter ring (Inv₁ + the last two inverters) remains closed during this phase. The circuit therefore regenerates/oscillates instead of holding its state: the stored charge is overwritten, spurious transitions appear at the output, and the intended clocked (sample‑and‑hold / divide‑by‑two‑type) operation is corrupted. This shows up as functional errors, jitter, and clock‑related spurs.\n- **It loads the critical nodes.** Inv₁ adds gate and junction capacitance to both the input node of the CK switch and the output node of the first inverter. This slows the charging/discharging of these nodes, reduces the maximum clock frequency (or lowers the oscillation frequency), and increases dynamic power and area.\n- **It causes contention during the transparent phase.** When CK is on, the switched inverter and Inv₁ drive the same node simultaneously. Any skew or size mismatch between them produces fighting (short‑circuit) current and degraded edge rates, again costing speed and power.\n- **Only possible benefit:** if the clocks are non‑overlapping, Inv₁ prevents the internal node from being left completely floating when both switches are off, acting as a \"keeper\" that improves noise immunity and retention. But a full‑strength inverter is too strong for a keeper – it overpowers the stored value rather than merely preserving it.\n\n**Bottom line:** the red inverter bypasses the clocked switch, so the feedback loop is never truly open. The circuit loses its clean sampled/clocked behavior (it tends to ring‑oscillate during the hold phase), and the extra capacitive loading and contention reduce speed and increase power. Unless it was deliberately added as a weak keeper for floating‑node protection, its net effect on performance is negative.",
        "format": "markdown",
        "sha256": "54658e3bb71a47e635d8ce8fc7f6114c5505738ed1f8e9f16f33e0b527e320c4"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It recognizes the bypass path and the possibility of a three-inverter loop corrupting operation, but misses the key tradeoff: the bypass improves high-speed operation, while causing trouble at low clock rates and raising the minimum usable frequency. Its claim that the net effect is to reduce speed is contrary to the golden solution.",
          "golden_solution_sha256": "09f12aa6905fa83982420dcd1602844314d44b4575734bb31f92f5ccf31131d2",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 950,
        "output_tokens": 12686,
        "total_tokens": 13636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12150,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 950,
        "output_tokens": 12686,
        "total_tokens": 13636,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12150,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I do not agree.**\n\n**Why the \"keeper/latch\" story is wrong:**\n- A keeper (or a cross‑coupled latch) requires the feedback inverter to run *from the output node back to the input node*, i.e., opposite to the forward inverter, so that two inverters form a loop with an even number of inversions (a bistable).\n- Look at the red inverter here: its **input** is tied to Inv₁'s *input* node (the node behind the CK switch) and its **output** to Inv₁'s *output* node (the node in front of the CK̄ switch). It therefore points in the **same direction** as Inv₁ — it is in *parallel* with Inv₁, not cross‑coupled with it. No even‑inversion loop is formed around Inv₁, so nothing is latched and nothing is \"kept.\"\n- Consequently, when the CK switch opens, Inv₁'s gate node is still a floating (dynamic) storage node. Its charge still leaks away, and the circuit **still has a minimum clock frequency requirement**. The claimed benefit does not exist.\n\n**Actual role of the red inverter:**\n- During the CK phase it merely adds a parallel drive path duplicating Inv₁ (input→output), contributing no storage.\n- During the CK̄ phase it closes a loop with the last two inverters (red Inv + Inv₂ + Inv₃ = three inversions, an odd number). An odd‑inversion loop is a ring‑oscillator/regeneration path, not a bistable: it makes that phase an actively driving (oscillatory) loop rather than a static hold state.\n- In short, the red inverter provides an odd‑inversion feedback/drive path (parallel reinforcement of Inv₁ in one phase, ring loop with Inv₂–Inv₃ in the other); it does **not** statically store the state. The storage nodes remain dynamic, so leakage still dictates a minimum operating frequency, exactly the opposite of what the quoted answer claims.",
        "format": "markdown",
        "sha256": "7902f10c19af61803a41e2da1729f2adea13cab178050c25ee26f555461c589a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and recognizes a possible odd-inversion loop, but misidentifies the red inverter as parallel with Inv1. It misses the feedforward path that bypasses the CK switch and Inv1, along with its high-speed benefit and low-frequency interference; the minimum usable frequency is not explained by leakage as claimed.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 999,
        "output_tokens": 13050,
        "total_tokens": 14049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 999,
        "output_tokens": 13050,
        "total_tokens": 14049,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12612,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I don't agree.** The statement misreads the topology on both counts.\n\n**Why it is not a keeper / cross‑coupled latch:**\n\n- A keeper latch around Inv1 would require an inverter whose *input* is Inv1's output and whose *output* is Inv1's *input* (the internal node behind the CK switch). That cross‑coupling (two inverters facing each other, even number of inversions in the loop) is what creates a bistable storage cell.\n- Here the red inverter is wired differently: its input is the node *in front of* the CK switch (the feedback node), and its output is tied to Inv1's output. So it sits **in parallel with the series combination (CK switch + Inv1)**, with the same polarity. When CK is on it merely duplicates what Inv1 already does (both drive the middle node to the complement of the input node); it feeds back nothing. When CK is off, its input node is not a stored node either – it is driven by the rest of the loop – so the red inverter holds nothing.\n- Consequently, the true state‑storing nodes remain the floating gate nodes behind the open switches (Inv1's input when CK is low, and the next inverter's input when CK̄ is low). These nodes keep their value only as charge on parasitic capacitance, and leakage still corrupts them if the clock stops. **The minimum‑clock‑frequency requirement is therefore *not* removed.** (A real keeper would have to be connected across Inv1's input and output, refreshing the floating gate node.)\n\n**Actual role of the red inverter:**\n\nIt is part of the signal/feedback path, not a storage element. When CK is off and CK̄ is on, Inv1 is cut off (its input floats), and it is the red inverter that closes the loop: middle node → Inv2 → Inv3 → input node → red inverter → middle node. This loop contains an odd number of inversions (red + Inv2 + Inv3), i.e., it is the recirculating/oscillating path of the switched ring loop; during the CK phase the loop is broken and the value is frozen on the dynamic nodes. In short, the red inverter **provides the inversion path that sustains the loop during the phase when the CK switch is open (it drives the middle node from the feedback node while Inv1 is disconnected)** – it makes the circuit work as a switched (ring‑oscillator‑type) loop, not as a static latch.\n\nSo the claimed answer is wrong twice over: the red inverter is not cross‑coupled to Inv1 (it is in parallel with it), and since all storage remains dynamic, the leakage‑imposed minimum clock frequency still applies.",
        "format": "markdown",
        "sha256": "08c3bbf3210dd960f66d4181ea37dbe5faa2618d63143f3f77445480d012016b"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and recognizes the bypass connection and a possible three-inversion loop. However, it misstates the red inverter’s main role as sustaining the loop rather than as an unclocked feedforward path that pre-drives Inv1’s output. It also misses the key tradeoff: this can improve high-speed operation but overpower the latch at low clock rates, raising the minimum usable frequency.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 999,
        "output_tokens": 11305,
        "total_tokens": 12304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10710,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 999,
        "output_tokens": 11305,
        "total_tokens": 12304,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10710,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-015-but-input-red-inverter-not-tied-output",
      "part": "part2",
      "question_number": 15,
      "question": "In the figure, somebody answers:\n\n> The red inverter acts as a keeper, forming a cross-coupled latch with `Inv1`.\n> This removes the minimum clock frequency requirement due to leakage.\n\nDo you agree with this answer? What is the actual role of the red inverter?",
      "figures": [
        "tasks/part2-015-but-input-red-inverter-not-tied-output/figure-12.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**No, I don't agree.**\n\n**Topology check.** Label the node at the input side of the *CK* switch (which is also the feedback node from the last inverter) as *X*, and the node at Inv₁'s output (input of the *CK̄* switch) as *Y*. The red inverter has its **input on X and its output on Y** – i.e., it points in the *same* direction as Inv₁. It is therefore **in parallel (feed‑forward) with Inv₁**, not cross‑coupled to it. A keeper/latch would require the opposite connection (input on *Y*, output back onto Inv₁'s input node), so that the two inverters form a positive‑feedback pair. As drawn, there is no bistable loop: when *CK* is on, the red device merely fights/drives the same node Inv₁ drives; when *CK* is off, it does not reinforce any stored value, it just overwrites node *Y* from node *X*.\n\n**Consequence for the leakage argument.** Since no latch is formed, nothing holds the dynamic nodes. The gates of Inv₁ (when *CK* is open) and of Inv₂ (when *CK̄* is open) still store charge dynamically and still leak, so the red inverter does **not** eliminate a minimum‑clock/refresh requirement by \"keeping\" state. The stated mechanism is wrong.\n\n**Actual role of the red inverter.** It is a **bypass (feed‑forward) path around the *CK* switch that keeps the feedback ring closed when Inv₁ is switched out.** During the phase when *CK* is off and *CK̄* is on, the only closed loop is red inverter → Inv₂ → Inv₃ → back to the red inverter's input. The red inverter supplies the missing inversion so that this loop has an **odd number of inversions**, i.e., the circuit remains an active ring (oscillating/propagating) instead of collapsing into a broken loop or an even‑inversion bistable latch. When *CK* is on, it simply adds drive in parallel with Inv₁. In short, the red inverter is part of the signal/oscillation path that guarantees the loop stays closed and odd‑inverted in every clock phase – it is **not** a keeper, and it creates no latch with Inv₁.\n\n(If the designer had wanted a keeper that removes the leakage‑imposed minimum clock, the red inverter would have to be connected the other way round, cross‑coupled to Inv₁, which it is not.)",
        "format": "markdown",
        "sha256": "9da578d491e3b861adf8d0f797d627b08f616f4379f3c9e341b48bfb1c548a90"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "Correctly rejects the keeper interpretation and identifies a feedforward bypass, but misses the key tradeoff: the branch can speed high-rate operation yet overpower the latch at low rates, raising the minimum usable clock frequency. It instead overstates the ring’s role as keeping the loop active in every phase.",
          "golden_solution_sha256": "172cbb780508db2c8965d08eedaac49be4edfaf50993cf59fb05d5d161e1fa3c",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 999,
        "output_tokens": 11621,
        "total_tokens": 12620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 999,
        "output_tokens": 11621,
        "total_tokens": 12620,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11063,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the trade‑off\n\nThe circuit is a shunt–shunt (parallel–parallel) feedback amplifier: a complementary inverter ($M_1$, $M_2$) with $R_F$ around it. Two relations govern the design:\n\n**Input match (the constraint).** Looking into the input node, Miller multiplication of $R_F$ gives\n\n$$R_{in}=\\frac{R_F}{1+A},\\qquad A=(g_{m1}+g_{m2})\\,(R_F\\parallel R_o),\\quad R_o=r_{o1}\\parallel r_{o2}\\parallel R_L$$\n\nso the 50 Ω requirement only fixes the *combination*: $R_F = 50\\,(1+A)$. Many $(G_m, R_F)$ pairs satisfy it — that freedom is what we optimize over, with $G_m \\equiv g_{m1}+g_{m2}$.\n\n**Noise factor.** Summing the thermal noise of $R_S$, of $R_F$, and of the two channels ($\\overline{i_d^2}=4kT\\gamma g_m$) at the output gives, to good approximation,\n\n$$F \\approx 1+\\underbrace{\\frac{\\gamma}{G_m R_S}}_{M_1,M_2}+\\underbrace{\\frac{R_S}{R_F}\\left(1+\\frac{1}{G_mR_S}\\right)^2}_{R_F}\\;\\approx\\;1+\\frac{\\gamma}{G_m R_S}+\\frac{1}{1+A}$$\n\n## How to optimize\n\nBoth excess terms are monotonically decreasing in $G_m$ and in $A$, and $R_F$ is *slaved* to the matching condition. Therefore:\n\n1. **Make $G_m = g_{m1}+g_{m2}$ as large as power and parasitics allow** ($G_m R_S \\gg 1$, e.g. $G_m \\ge 5/R_S = 100$ mS). This directly suppresses the transistor term $\\gamma/(G_mR_S)$. The complementary pair is already optimal in this respect: $g_{m1}$ and $g_{m2}$ add to the signal *and* to $G_m$ for the same bias current, doubling $G_m$ per milliamp versus a single device.\n2. **Keep the loop gain $A = G_m(R_F\\parallel R_o)$ large** (high $r_o$: moderate overdrive, longer channel or cascode if headroom permits; light loading). Then the matching condition $R_F = 50(1+A)$ forces $R_F$ into the kΩ range, and the feedback resistor's noise contribution $R_S/R_F = 1/(1+A)$ becomes negligible. *Intuitively: let the loop gain, not the resistor value, create the 50 Ω.*\n3. **Never match with a small $R_F$.** The tempting choice $G_m R_S \\approx 1$, $R_F \\sim 100$–500 Ω gives $F \\approx 1+\\gamma+4R_S/R_F \\ge 3$ dB — the opposite of optimal.\n4. **Re-close the constraint:** after picking $G_m$ and $R_o$, set $R_F = 50\\,[1+G_m(R_F\\parallel R_o)]$ exactly (this also sets the DC bias point through the feedback loop).\n\n## Practical limits and expected result\n\nThe optimum is bounded by secondary effects: $C_{gs1}+C_{gs2}$ grows with device size (degrading the match and adding induced-gate noise at high frequency), $r_o$ falls as current rises (limiting $A$), and linearity/power budget cap $G_m$. Within those limits the floor is\n\n$$NF \\approx 10\\log\\!\\left(1+\\frac{\\gamma}{G_mR_S}+\\frac{1}{1+A}\\right)$$\n\ne.g. $G_mR_S = 5$, $A = 30$, $\\gamma = 2/3$ → $F \\approx 1.16$ (NF ≈ 0.65 dB idealized; ~1.5–2.5 dB once gate resistance, parasitics and frequency effects are included).\n\n**In one sentence:** with $R_{in}=50\\ \\Omega$ enforced by $R_F=50(1+A)$, minimize NF by pushing the inverter transconductance $g_{m1}+g_{m2}$ (and hence the gain $A$) as high as power and parasitics permit, so that $R_F$ becomes large enough to be noiseless and the channel noise is suppressed by $1/(G_mR_S)$.",
        "format": "markdown",
        "sha256": "f9e9d1ad9f8010c123f3e1e0c9807aae2d1d69eb8cbbf4a2e3fcd8bb71049446"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly recommends increasing the inverter’s total gm beyond 1/Rs while raising RF to preserve the 50 Ω match, and explains that channel noise can then fall below 1+γ. Its finite-output-resistance match relation is an approximation, but it supports the correct high-loop-gain optimization and conclusion.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2045,
        "output_tokens": 12760,
        "total_tokens": 14805,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2045,
        "output_tokens": 12760,
        "total_tokens": 14805,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the trade‑off\n\nThe circuit is a shunt–shunt (transresistance) feedback stage: the complementary common‑source pair M1–M2 gives an inverting gain, and R_F closes the loop. The 50 Ω input match is *synthesized by the loop gain*, not by a physical resistor at the input:\n\n**Input resistance**\n\nR_in = (R_F + R_out)/(1 + g_m·R_out),  g_m = g_m1 + g_m2,  R_out = r_o1‖r_o2\n\ni.e. for g_m·R_out ≫ 1, R_in ≈ R_F/(1+T) with T = g_m·R_out (loop gain). So the matching constraint is\n\nR_F = R_S(1 + g_m·R_out) − R_out ≈ R_S·g_m·R_out  (R_S = 50 Ω).\n\n**Noise figure (matched, R_S = 50 Ω)**\n\nSumming the channel noise of M1/M2 (4kTγg_m) and the thermal noise of R_F (4kT/R_F) against the source noise gives, to good accuracy:\n\nNF ≈ 1 + γ/(g_m·R_S) + (R_S + 1/g_m)²/(R_S·R_F) ≈ 1 + γ/(g_m·R_S) + R_S/R_F\n\n- channel noise term ∝ 1/g_m\n- feedback‑resistor term ∝ 1/R_F\n\n## The optimization rule\n\nThe constraint R_in = 50 Ω ties R_F to the loop gain: R_F ≈ R_S·g_m·R_out. Substituting,\n\nNF ≈ 1 + γ/(g_m·R_S) + 1/(g_m·R_out)\n\nBoth excess terms fall monotonically as g_m and the loop gain g_m·R_out rise. Therefore:\n\n1. **Maximize g_m = g_m1 + g_m2** (wider devices, higher bias current; the complementary pair is already the right trick—it adds g_m2 without spending voltage headroom). This directly cuts the γ/(g_m·R_S) term.\n2. **Maximize the intrinsic gain g_m·R_out** (moderate/low V_OV for high g_m/I_D, somewhat longer channels for r_o). This raises the loop gain.\n3. **Re‑scale R_F upward to hold the match:** R_F = 50·(1 + g_m·R_out) − R_out. Because R_F grows with loop gain, its noise current into the input node (term ≈ R_S/R_F) shrinks at the same time. There is no extra noise penalty for the match itself—the 50 Ω comes from feedback, so making the loop \"stronger\" makes the match \"cheaper\" in noise.\n4. The g_m1:g_m2 ratio barely matters for NF (each device contributes signal and noise in the same proportion); choose it for g_m per current and minimum input capacitance.\n\n## Where the optimization stops (practical limits)\n\nIn the ideal model NF → 1 as g_m, R_F → ∞, so the optimum is set by second‑order effects:\n\n- **Input capacitance:** C_in ≈ C_gs1 + C_gs2 + (1+|A_v|)C_gd with |A_v| ≈ R_F/R_S. Since ω·R_S·C_in must stay ≪ 1 or the match (and hence NF) degrades at RF, g_m (≈ ω_T·C_gs) and R_F (Miller multiplication of C_gd) cannot grow indefinitely.\n- **r_o falls if current is pushed too high** (r_o ∝ 1/I_D), eroding loop gain—prefer gaining g_m through device size/g_m/I_D rather than brute current.\n- **Bandwidth, stability and power budget** of the feedback loop.\n\n**Bottom line:** with R_in pinned at 50 Ω, the only noise knobs are the loop gain and R_F. Drive M1–M2 as hard as the input‑capacitance/bandwidth budget allows (maximize g_m and g_m·R_out), and increase R_F proportionally (R_F ≈ 50·g_m·R_out) to preserve the match; both the transistor noise (∝1/g_m) and the R_F noise (∝1/R_F) then decrease together, minimizing NF.",
        "format": "markdown",
        "sha256": "7c63dc53cc89ada189fb54b59743189fdd959f666705bb8d0b3a2c8028f0a6a7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly uses the finite-output-resistance input-match relation and explains that gm can exceed 1/Rs while RF is adjusted to preserve the 50 Ω match, allowing NF below 1 + γ. Its recommendation to raise gm and RF together matches the full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 2045,
        "output_tokens": 12861,
        "total_tokens": 14906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 2045,
        "output_tokens": 12861,
        "total_tokens": 14906,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 11887,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-016-optimize-for-nf-rin-must-remain-equal",
      "part": "part2",
      "question_number": 16,
      "question": "How do we optimize the circuit shown in the figure for the NF if Rin must remain equal to 50 Ohm?",
      "figures": [
        "tasks/part2-016-optimize-for-nf-rin-must-remain-equal/figure-13.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the constraint\n\nThe circuit is a shunt–shunt (voltage–current) feedback amplifier: the complementary common‑source pair M1–M2 provides the gain, and R_F closes the loop. The input resistance is *created by the feedback*, not by a physical resistor:\n\nR_in ≈ R_F / (1 + A),  with A = (g_m1 + g_m2)·R_out (open‑loop gain), more exactly R_in = (R_F + R_out)/(1 + (g_m1+g_m2)R_out).\n\nSo the matching condition R_in = 50 Ω does **not** fix R_F; it fixes the *ratio* R_F/(1+A). This is the key degree of freedom: you may raise R_F as long as you raise the gain A in proportion.\n\n## Noise figure of the topology\n\nReferred to the 50 Ω source, the excess noise comes from only two places:\n\n- **R_F:** its thermal noise contributes ≈ R_s/R_F = 1/(1+A) to F.\n- **M1 and M2 channel noise:** contributes ≈ γ(1+R_s/R_F)² / [(g_m1+g_m2)·R_s] to F.\n\nHence\n\nNF ≈ 1 + R_s/R_F + γ / [(g_m1 + g_m2) R_s].\n\nNote there is no 3 dB penalty from a matching resistor – that is the virtue of this topology – but both remaining terms must be pushed down.\n\n## Optimization recipe (R_in = 50 Ω fixed)\n\n1. **Increase the transconductance G_m = g_m1 + g_m2** (wider devices and/or higher bias current, or raise R_out by cascoding). This directly shrinks the channel‑noise term γ/(G_m R_s). The complementary pair is already optimal in this sense: M1's and M2's noise both arrive at the output *as signal current*, so you get G_m = g_m1+g_m2 for one bias current.\n2. **Scale R_F up in proportion to the new gain**, R_F = (1+A)·50 Ω, to keep R_in = 50 Ω. A larger R_F carries less thermal noise current (4kT/R_F) and reduces the feedback‑resistor term R_s/R_F = 1/(1+A).\n3. In other words: *buy noise performance with gain and transconductance, while letting the feedback re‑establish the 50 Ω match.* Every time you double G_m (and hence A and R_F), both excess terms roughly halve.\n\n## Where it stops helping (the actual optimum)\n\nThe improvement is monotonic in G_m and R_F, so the optimum is set by the secondary constraints:\n\n- **Bandwidth:** the input node sees C_in = C_gs1 + C_gs2 + (1+A)(C_gd1 + C_gd2) driven by R_s ∥ R_in = 25 Ω. Bigger devices and bigger A (more Miller multiplication of C_gd) lower the bandwidth.\n- **Power and headroom:** higher G_m costs bias current; cascoding for higher R_out costs headroom.\n- **Stability/gain flatness:** very large loop gain with a heavy capacitive load must be checked for peaking.\n\nSo the design procedure is: choose the minimum G_m (i.e., minimum power) that meets the NF target, set R_F = (1+A)·50 Ω to hold the match, and verify bandwidth; if bandwidth fails, trade back some NF (smaller devices, smaller A, smaller R_F) or add peaking. Numerically, e.g., G_m = 40 mS and A = 10 (R_F ≈ 550 Ω) gives F ≈ 1 + 0.09 + 0.33 ≈ 1.4 (≈1.5 dB), and doubling G_m and R_F again removes most of the remainder.\n\n**Bottom line:** with R_in pinned at 50 Ω by feedback, NF is optimized by maximizing loop gain and total g_m (bias current/size, complementary pair, possibly cascode) and simultaneously increasing R_F = (1+A)·50 Ω, until bandwidth, power, or headroom limits are reached.",
        "format": "markdown",
        "sha256": "87b0d97445503cb7dcfc30e082f6f9014873563e790d749642dcf48e15e927c3"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It gives the finite-output-resistance input-resistance relation and correctly explains that gm can exceed 1/Rs while RF is increased to preserve the match, allowing NF below 1+γ. Its later simplified RF expression omits the finite-ro offset, but the core reasoning satisfies the golden solution’s full-credit rule.",
          "golden_solution_sha256": "6801650fd2054e7d374317849fcda2881c563a35f3d14b44d310d3d32f91b1cd",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2045,
        "output_tokens": 9719,
        "total_tokens": 11764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2045,
        "output_tokens": 9719,
        "total_tokens": 11764,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8782,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Feedback Picture\n\nThe resistor R_F connects the output node (V_out) back to the input node (P), i.e., it senses the output **voltage** and returns a **current** to the input node. This is a **shunt–shunt (transresistance) feedback** topology, which *desensitizes (lowers)* the input impedance.\n\n**Forward path (open‑loop gain):**\n- M₁ (common‑source, load R_D1): gain ≈ –g_m1 R_D1\n- M₂ (common‑source, load r_O2 since I_SS is ideal): gain ≈ –g_m2 r_O2\n- M₃ (source follower driving R_D2): gain ≈ g_m3 R_D2/(1 + g_m3 R_D2) ≈ 1\n\nSo the open‑loop voltage gain from P to V_out is\n\nA ≈ g_m1 R_D1 · g_m2 r_O2 · (g_m3 R_D2/(1+g_m3 R_D2)) ≈ g_m1 R_D1 · g_m2 r_O2\n\n## Applying Feedback Theory\n\nFor shunt–shunt feedback, the feedback resistor R_F appears across the input in the open‑loop circuit, and the loop gain is T ≈ A (since the feedback network returns a current i_F ≈ v_out/R_F). The closed‑loop input resistance is therefore the open‑loop input resistance (≈ R_F, since the gate of M₁ draws no current) divided by (1 + T):\n\n**R_in ≈ R_F / (1 + g_m1 R_D1 · g_m2 r_O2 · g_m3 R_D2/(1+g_m3 R_D2))**\n\nor, for large loop gain,\n\n**R_in ≈ R_F / (g_m1 R_D1 · g_m2 r_O2)  ≪  R_F**\n\n## Interpretation\n\nBecause the gate of M₁ itself draws no current, the only path for input current is through R_F; the feedback action holds node P at a virtual ground (the high gain A forces v_out to oppose any change at P), so the effective input resistance is R_F divided by the loop gain — a very small value, as expected for a shunt‑feedback (current‑input) amplifier. C_in simply adds in parallel (Z_in = R_in || 1/(C_in s)) and does not affect the low‑frequency value of R_in.",
        "format": "markdown",
        "sha256": "83c27e3f384d969ee6299d0f79e3a106c895fa219002e8d887cfde35db1b1bd7"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes shunt feedback and the qualitative reduction of input resistance, but its formula omits the output-side resistance term: the exact result is (RF + RD2)/(1 + A0). Its assumed open-loop gain also does not match the specified two-stage model.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 196,
        "output_tokens": 14470,
        "total_tokens": 14666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 196,
        "output_tokens": 14470,
        "total_tokens": 14666,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13939,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up: Identify the Feedback Structure\n\n- **M₁** is a common‑source stage (gate = P, drain = X, load R_D1).\n- **M₂** (biased by I_SS) and **M₃** are source followers that buffer X → V_out without inversion.\n- **R_F** connects the output node V_out back to the input node P: this is **shunt–shunt (voltage–current) feedback**, which lowers the input impedance.\n\n## Open‑Loop Gain (P → V_out)\n\n$$A_v = \\frac{v_{out}}{v_P} = -g_{m1}R_{D1}\\cdot\\underbrace{\\frac{g_{m2}r_{o2}}{1+g_{m2}r_{o2}}}_{M_2\\ \\text{follower}\\,\\approx 1}\\cdot\\underbrace{\\frac{g_{m3}(R_{D2}\\|R_F\\|r_{o3})}{1+g_{m3}(R_{D2}\\|R_F\\|r_{o3})}}_{M_3\\ \\text{follower}\\,\\approx 1} \\approx -g_{m1}R_{D1}$$\n\n## Applying Miller's Theorem / Feedback Theory\n\nWriting KCL at node P (gate of M₁ draws no current), with $v_{out} = A_v v_P$:\n\n$$i_{in} = v_P\\, sC_{in} + \\frac{v_P - v_{out}}{R_F} = v_P\\left(sC_{in} + \\frac{1+|A_v|}{R_F}\\right)$$\n\n## Result\n\n$$\\boxed{Z_{in}(s) = \\frac{1}{sC_{in}}\\ \\Big\\|\\ \\frac{R_F}{1+|A_v|}}\\qquad\\text{i.e.}\\qquad R_{in} = \\frac{R_F}{1+|A_v|} \\approx \\frac{R_F}{1+g_{m1}R_{D1}}$$\n\nwith $|A_v| = g_{m1}R_{D1}\\cdot\\frac{g_{m2}r_{o2}}{1+g_{m2}r_{o2}}\\cdot\\frac{g_{m3}(R_{D2}\\|R_F\\|r_{o3})}{1+g_{m3}(R_{D2}\\|R_F\\|r_{o3})}$.\n\n**Interpretation:** because R_F returns a current proportional to the (inverted, amplified) output voltage, the Miller effect divides R_F by (1 + gain). Hence the transimpedance amplifier presents a very small input resistance R_F/(1+g_m1R_D1) in parallel with C_in — exactly what is desired for a current‑mode (transimpedance) input.",
        "format": "markdown",
        "sha256": "1a536221415276a69880bdce4bb4a1957b7d974f0cbac32e8e58c22e417ba474"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes that negative feedback lowers the input resistance, but it misses the required exact result, Rin = (RF + RD2)/(1 + A0), and uses an incorrect simplified gain that omits the amplifier’s second-stage gain and output resistance.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 196,
        "output_tokens": 12858,
        "total_tokens": 13054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 196,
        "output_tokens": 12858,
        "total_tokens": 13054,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 12216,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-017-compute-input-impedance",
      "part": "part2",
      "question_number": 17,
      "question": "Compute the input impedance of the circuit in the figure.",
      "figures": [
        "tasks/part2-017-compute-input-impedance/figure-14.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Small‑Signal Analysis\n\n**Signal path (ideal current sources, neglect r_o and body effect):**\n\n* **M₁ (common‑source):** v_X = –g_m1 R_D1 · v_P\n* **M₂ (source follower, loaded by ideal I_SS):** unity gain → v_{S2} = v_X\n* **M₃ (source follower):** drives R_L = R_D2 ‖ R_F\n\nWriting KCL at the output node gives the gain from the input node P to the output:\n\n$$A_v = \\frac{v_{out}}{v_P} = \\frac{\\left(\\frac{1}{R_F} - g_{m1}R_{D1}\\,g_{m3}\\right)R_L}{1+g_{m3}R_L},\\qquad R_L = R_{D2}\\parallel R_F$$\n\n(i.e. A_v ≈ –g_m1 R_D1 · g_m3 R_L/(1+g_m3 R_L): a large *negative* gain, confirming negative shunt–shunt feedback through R_F.)\n\n## KCL at the Input Node\n\n$$I_{in} = \\frac{v_P}{R_{in}} + sC_{in}v_P + \\frac{v_P - v_{out}}{R_F} = v_P\\left[\\frac{1}{R_{in}} + sC_{in} + \\frac{1-A_v}{R_F}\\right]$$\n\nTherefore:\n\n$$\\boxed{Z_{in}(s) = \\frac{v_P}{I_{in}} = \\left[\\,R_{in} \\;\\Big\\|\\; \\frac{1}{sC_{in}} \\;\\Big\\|\\; \\frac{R_F}{1-A_v}\\,\\right]}$$\n\n## Simplified (Low‑Frequency) Result\n\nSince |A_v| ≫ 1, the feedback resistor appears at the input divided by (1 – A_v) ≈ (1 + T), where the loop gain is\n\n$$T = g_{m1}R_{D1}\\cdot\\frac{g_{m3}(R_{D2}\\parallel R_F)}{1+g_{m3}(R_{D2}\\parallel R_F)} \\approx g_{m1}R_{D1}$$\n\nHence:\n\n$$Z_{in} \\approx R_{in} \\;\\Big\\|\\; \\frac{R_F}{1+T} \\;\\approx\\; R_{in} \\;\\Big\\|\\; \\frac{R_F}{g_{m1}R_{D1}} \\qquad (\\text{with } C_{in} \\text{ in parallel at high frequency})$$\n\n**Interpretation:** This is a shunt–shunt (transimpedance) feedback amplifier, so the feedback *desensitizes* (lowers) the input impedance: R_F is Miller‑reduced by the loop gain, giving Z_in ≈ R_F/(g_m1 R_D1) ‖ R_in, shunted by C_in, which makes Z_in roll off as 1/(sC_in) at high frequency.",
        "format": "markdown",
        "sha256": "0b6f91cde9eb8698bfb465757f059185b7a8386c33439836a0334024eafa5c9d"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It correctly recognizes that shunt feedback lowers the input impedance, but it misidentifies the amplifier topology and uses a loaded-gain approximation. It misses the required result, (RF + RD2)/(1 + A0), and the correct two-stage gain.",
          "golden_solution_sha256": "d478f09ce99c16f2ada89711c88d0564aa20ae775a06fad0c89d6658dc32fb99",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 196,
        "output_tokens": 17459,
        "total_tokens": 17655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 196,
        "output_tokens": 17459,
        "total_tokens": 17655,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 16776,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nThe LDO's noise $v_n(t)$ (PSD $= S_{th}$) sits on the supply node $V_{out}$, i.e., at the top of the tank inductors $L_1$. At offset frequencies of interest (a few kHz–MHz), the inductors are essentially short circuits, so this noise appears as a **common‑mode disturbance at nodes X and Y**. Because the capacitances hanging on X and Y are voltage‑dependent (the varactors $M_{v1}, M_{v2}$, the $C_{GD}$/$C_{DB}$ of $M_1, M_2$, the switched‑capacitor banks $B_1, B_2$), a common‑mode shift changes the *cycle‑averaged* tank capacitance and hence the oscillation frequency. This is **supply pushing**. So the LDO noise does not appear directly at the output; it **frequency‑modulates** the VCO.\n\n## Step 1 – Characterize the pushing gain\n\nDefine (by measurement, simulation, or by differentiating $\\omega_0 = 1/\\sqrt{L_1 C_{eq}(V)}$ with respect to the common‑mode level):\n\n$$K_{DD} = \\frac{\\partial \\omega_{out}}{\\partial V_{DD}} \\quad [\\text{rad/s/V}], \\qquad K_f = \\frac{K_{DD}}{2\\pi}\\ [\\text{Hz/V}]$$\n\nThis single number already embeds the coupling through $L_1$ and the capacitance nonlinearities.\n\n## Step 2 – Convert FM to PM\n\nThe noise produces $\\Delta\\omega(t) = K_{DD}\\, v_n(t)$, and phase is the integral of frequency, $\\phi(t) = \\int \\Delta\\omega\\, dt$. Integration contributes a $1/(2\\pi f_m)^2$ factor at offset $f_m$, so the phase‑noise PSD is:\n\n$$S_\\phi(f_m) = \\frac{K_{DD}^2\\, S_{th}}{(2\\pi f_m)^2} \\quad [\\text{rad}^2/\\text{Hz}]$$\n\n## Step 3 – Single‑sideband phase noise\n\nFor small modulation, $L(f_m) \\approx S_\\phi(f_m)/2$:\n\n$$\\boxed{L(f_m) = \\frac{K_{DD}^2\\, S_{th}}{2\\,(2\\pi f_m)^2} = \\frac{K_f^2\\, S_{th}}{2\\, f_m^2}}$$\n\nor in dBc/Hz: $10\\log_{10}\\!\\left[K_f^2 S_{th}/(2 f_m^2)\\right]$.\n\n## Remarks\n\n- Even though $S_{th}$ is **white**, this contribution falls at **20 dB/decade** ($1/f_m^2$) because of the FM→PM integration — it looks like a raised floor added to the tank's own $1/f^2$ region. Total phase noise is the power sum of this term and the tank/active‑device contributions.\n- The result assumes linear, small‑angle FM. If the pushing is strongly nonlinear or you need accuracy at large offsets (where $L_1$ no longer looks like a short and the common‑mode coupling factor $Z_{CM}/(Z_{CM}+j\\omega L_1)$ rolls off), use a rigorous method: periodic‑steady‑state + pnoise simulation with the LDO noise as the input source, or the impulse‑sensitivity‑function (ISF) approach with the effective ISF of the supply node.\n- Design implication: minimizing $K_{DD}$ (symmetric layout, keeping the varactor common‑mode fixed, filtering/regulating the supply) suppresses this term quadratically.",
        "format": "markdown",
        "sha256": "fc0d63ea78d2189a10c4ded266254236527b02f2b5f68bc238548eaa8dc19780"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "It correctly identifies supply pushing, uses the supply-to-frequency sensitivity, and applies FM-to-phase conversion with the correct 1/f² dependence and SSB factor. Its recommendation to reduce KDD captures the key design implication.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2560,
        "output_tokens": 7838,
        "total_tokens": 10398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2560,
        "output_tokens": 7838,
        "total_tokens": 10398,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6997,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting up the problem\n\nThe LDO's thermal noise appears as a random voltage $v_n(t)$ (PSD = $S_{th}$) in series with the regulated supply node $V_{out}$. Since the inductors $L_1$ carry DC and are low impedance at offset frequencies of interest, this noise transfers (with gain ≈ 1) to the **common‑mode level of nodes X and Y**. It does not appear as differential AM; it matters because it **frequency‑modulates** the oscillator:\n\n- The varactors $M_{v1}, M_{v2}$ are biased at $V_{CM} - V_{cont} = V_{out} - V_{cont}$, so $v_n$ shifts their capacitance.\n- The voltage‑dependent junction/overlap capacitances of $M_1, M_2$ (and of the banks $B_1, B_2$) at X and Y also change with $V_{CM}$.\n\nHence the instantaneous frequency is $\\omega_{out}(t) = \\omega_0 + K_{DD}\\, v_n(t)$, with the **supply pushing gain**\n\n$$K_{DD} = \\frac{\\partial \\omega_{out}}{\\partial V_{DD}} = -\\frac{\\omega_{out}}{2 C_{eq}}\\frac{\\partial C_{eq}}{\\partial V_{DD}}$$\n\nwhere $C_{eq}$ is the total capacitance at X (or Y). Note the useful shortcut: since the varactor capacitance depends only on $V_{out}-V_{cont}$, the varactor part of $K_{DD}$ is simply $-K_{VCO}$; i.e., LDO noise looks almost exactly like noise injected on the tuning line (plus a smaller term from $C_{DB}$, etc.).\n\n## Converting FM to phase noise\n\nPhase is the integral of frequency, so each noise component at offset $\\Delta f$ is divided by $2\\pi \\Delta f$:\n\n$$S_{\\phi}(\\Delta f) = \\frac{K_{DD}^2\\, S_{th}(\\Delta f)}{(2\\pi \\Delta f)^2}$$\n\nand the single‑sideband phase noise is\n\n$$\\mathcal{L}(\\Delta f) = \\frac{S_{\\phi}}{2} = \\frac{K_{DD}^2\\, S_{th}}{2\\,(2\\pi \\Delta f)^2}\\quad [\\text{dBc/Hz: } 10\\log_{10}]$$\n\n(Equivalently, with pushing in Hz/V: $S_\\phi = K_{DD,f}^2 S_{th}/\\Delta f^2$.)\n\n## Interpretation and completion\n\n- Because $S_{th}$ is white (thermal), this contribution falls at **−20 dB/decade** ($1/\\Delta f^2$), exactly like the tail‑pair and cross‑coupled‑pair white‑noise contributions.\n- The total VCO phase noise is the power sum: $\\mathcal{L}_{total} = \\mathcal{L}_{tank} + \\mathcal{L}_{active} + \\mathcal{L}_{tail} + \\frac{K_{DD}^2 S_{th}}{2(2\\pi\\Delta f)^2}$.\n- In practice $K_{DD}$ is extracted by simulation (sweep $V_{DD}$ and differentiate $\\omega_{out}$, or run pnoise with the LDO noise source enabled), and the formula above is used to budget how quiet the LDO must be: the LDO contribution stays negligible if $K_{DD}^2 S_{th} \\ll$ the tank‑limited phase‑noise floor times $(2\\pi\\Delta f)^2$.\n\n**Summary:** compute the supply‑pushing gain $K_{DD} = \\partial\\omega_{out}/\\partial V_{DD}$ (dominated by the varactor seeing $V_{out}-V_{cont}$, so $|K_{DD}| \\approx K_{VCO}$), then $\\mathcal{L}(\\Delta f) = K_{DD}^2 S_{th} / [2 (2\\pi \\Delta f)^2]$, a $1/f^2$‑shaped additive term to the VCO's phase noise.",
        "format": "markdown",
        "sha256": "bdfeec0bb26094c587ae30bd41284a934ff9f37eb2c5fddd9ddbeb4d9ca2c7e9"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly identifies supply pushing, converts the LDO voltage-noise spectrum to phase noise using the frequency sensitivity and FM integration, and gives the expected 1/Δf² dependence. It also captures the varactor connection to KVCO; factor and notation differences are immaterial.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2560,
        "output_tokens": 9895,
        "total_tokens": 12455,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2560,
        "output_tokens": 9895,
        "total_tokens": 12455,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 8953,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-018-ldo-regulator-generates-thermal-noise-with-spectrum",
      "part": "part2",
      "question_number": 18,
      "question": "If the LDO regulator in the figure generates thermal noise with spectrum Sth, how do we compute the VCO output phase noise?",
      "figures": [
        "tasks/part2-018-ldo-regulator-generates-thermal-noise-with-spectrum/figure-15.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Setting Up the Problem\n\nThe LDO's noise voltage $v_n(t)$ (spectrum $S_{th}$) sits at $V_{out}$, i.e., at the *top* of the tank inductors. The conversion to phase noise happens in three steps:\n\n**Step 1 – Coupling to the tank (common‑mode transfer).**\nAt offset frequencies of interest ($\\Delta\\omega \\ll \\omega_0$), the inductors $L_1$ are low impedance, so $v_n$ appears almost undiminished as a *common‑mode* shift of nodes $X$ and $Y$:\n\n$$H_{CM}(j\\Delta\\omega)=\\frac{v_{X,Y,\\,CM}}{v_n}\\approx\\frac{1}{1-\\Delta\\omega^2 L_1 C_{eq}}\\;\\approx\\;1$$\n\nwhere $C_{eq}$ is the total capacitance at $X$ (or $Y$). (Beware: $H_{CM}$ peaks at the common‑mode resonance $1/\\sqrt{L_1C_{eq}}$, amplifying LDO noise near that offset.)\n\n**Step 2 – Frequency modulation (\"supply pushing\").**\nThe slow common‑mode shift re‑biases the *nonlinear* capacitances in the tank — the MOS varactors $M_{v1}, M_{v2}$ (whose capacitance depends on $V_X - V_{cont}$) and the drain–bulk junctions of $M_1, M_2$. Since the cycle‑averaged capacitance changes with the common‑mode level, the oscillation frequency is modulated:\n\n$$\\Delta\\omega(t) = K_{VDD}\\, H_{CM}\\, v_n(t),\\qquad K_{VDD}=\\frac{\\partial \\omega_{osc}}{\\partial V_{CM}}=-\\frac{\\omega_{osc}}{2C_{eq}}\\frac{\\partial C_{eq,avg}}{\\partial V_{CM}}\\;\\;[\\text{rad/s/V}]$$\n\n(In practice $K_{VDD}$ is extracted by simulation/measurement: shift the supply by $\\Delta V$ and record $\\Delta f$.) The accompanying amplitude modulation converts to PM only weakly in a symmetric differential pair and is normally neglected.\n\n**Step 3 – FM → PM conversion.**\nPhase is the integral of frequency deviation, $\\phi(t)=\\int \\Delta\\omega\\,dt$, which divides the spectrum by $\\Delta\\omega^2$:\n\n$$S_\\phi(\\Delta\\omega)=\\frac{K_{VDD}^2\\,|H_{CM}(j\\Delta\\omega)|^2\\,S_{th}(\\Delta\\omega)}{\\Delta\\omega^2}$$\n\nand the single‑sideband output phase noise is $L = S_\\phi/2$:\n\n$$\\boxed{\\,L(\\Delta\\omega)=\\frac{K_{VDD}^2\\,|H_{CM}(j\\Delta\\omega)|^2\\,S_{th}(\\Delta\\omega)}{2\\,\\Delta\\omega^2}\\,}\\qquad\\left(\\text{equivalently } L(\\Delta f)=\\frac{K_{f}^2 S_{th}}{2\\Delta f^2},\\ K_f \\text{ in Hz/V}\\right)$$\n\n## Remarks\n\n- Since $S_{th}$ is white (thermal), this contribution falls as $1/\\Delta f^2$ (–20 dB/decade) and adds to the tank/device noise floor; it is the same formula as tuning‑line noise, with the VCO gain replaced by the **supply pushing gain** $K_{VDD}$.\n- The $1/\\Delta\\omega^2$ factor is the signature of FM→PM conversion: supply noise close-in to the carrier is far more damaging than far-out noise.\n- For verification, inject $S_{th}$ at $V_{out}$ in a periodic‑steady‑state noise simulation (PSS/Pnoise or ISF-based); it should agree with the quasi‑static result above at offsets well below $\\omega_0$ and the common‑mode resonance.",
        "format": "markdown",
        "sha256": "16a26e58e76f7eb80173a133e518420e6650fa804ec90dd80aa3053a52cd9a9a"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 3,
          "is_full_credit": false,
          "rationale": "It correctly identifies supply pushing, uses a frequency sensitivity to convert the LDO noise, and applies FM-to-PM conversion with the 1/Δf² dependence. It describes varactor modulation but omits the explicit design takeaway that Kpush is closely related to KVCO, so reducing KVCO reduces this noise conversion.",
          "golden_solution_sha256": "f40f5d47fc68dc67261745b47ef8f93ebeabc96a5ea084c1e3fcf7bea12e1811",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2560,
        "output_tokens": 7629,
        "total_tokens": 10189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2560,
        "output_tokens": 7629,
        "total_tokens": 10189,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 6724,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 3,
        "score_percent": 75,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nThe phase noise **improves (goes down)** – provided C_T is large enough – because C_T bypasses the tail node at the *second harmonic*, which is exactly where the tail current source's dangerous noise lives. It does this without disturbing the oscillation itself.\n\n## Why\n\n**What node P normally looks like.** In the differential (fundamental) mode, P is a virtual ground: the swings of X and Y cancel there, so at ω₀ the tail node is quiet. But because M₁ and M₂ take turns conducting, P carries a large *common‑mode* component at **2ω₀**, and the impedance seen at P at 2ω₀ is fairly high (just the parasitic capacitance of the node and the output resistance of I_SS).\n\n**How I_SS noise becomes phase noise.** The noise current of I_SS around **2ω₀ ± Δω** is multiplied (down‑converted) by the periodically switching pair into noise at ω₀ ± Δω, i.e., close‑in phase noise. The strength of this conversion is proportional to the impedance seen at P at 2ω₀: the noise develops a voltage at P, which modulates V_GS of both devices in common mode and is then chopped into differential noise by the time‑varying g_m imbalance.\n\n**What C_T does.** Adding C_T lowers |Z_P| at 2ω₀ (from ≈1/2ω₀C_P to ≈1/2ω₀(C_P+C_T)). The I_SS noise components near 2ω₀ are shunted into C_T instead of modulating M₁ and M₂, so their down‑converted contribution to phase noise is attenuated by roughly the same impedance ratio. As a bonus, clamping the 2ω₀ swing at P keeps the switching devices from being driven as deep into the triode region (with a floating tail, P rises toward the gate peaks while the drain is at its minimum), so the tank is less loaded and its effective Q suffers less.\n\n**What C_T does *not* do.** Since P is a virtual ground at ω₀, C_T does not load the tank: oscillation frequency, swing, and negative resistance are essentially unchanged, and C_T itself contributes no noise. So the only first‑order effect is the suppression of the tail‑noise conversion path.\n\n## Caveats\n\n- C_T only helps if 1/(2ω₀C_T) is made much smaller than the impedance looking into the sources (≈1/2g_m) and than r_O of the tail source; otherwise the attenuation is negligible. This usually means a fairly large capacitor (area penalty).\n- C_T does **not** filter the low‑offset (and flicker) noise of I_SS, which still modulates the bias current (AM noise, up‑converted flicker); those components see C_T as an open circuit.\n- The improvement saturates: once the tail is effectively an AC ground at 2ω₀, making C_T bigger buys nothing further.\n\n**Bottom line:** C_T acts as a second‑harmonic bypass/filter at the tail node, suppressing the down‑conversion of I_SS noise (and reducing triode loading of the tank), so the phase noise decreases, while the oscillation frequency and amplitude remain untouched because P is a virtual ground at ω₀.",
        "format": "markdown",
        "sha256": "727cf147fcff46e7bdfb5a3a8eca14992b9f65844a42bbe21ab79f755133eacd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "It concludes that adding CT monotonically improves phase noise by filtering tail-node noise, missing the nonmonotonic effect and the class-C improvement/degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2575,
        "output_tokens": 14130,
        "total_tokens": 16705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2575,
        "output_tokens": 14130,
        "total_tokens": 16705,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 13424,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Short answer\n\nThe phase noise **decreases (improves)** – C_T acts as a filter on the tail node, suppressing the noise component of I_SS that would otherwise fold onto the carrier. (If C_T is made excessively large, the improvement saturates and can eventually reverse, but the first‑order effect of adding C_T is a reduction of phase noise.)\n\n## Why\n\n**1. Where the tail noise enters.** Node P is not quiet: because M1 and M2 switch alternately, the tail node swings at **2ω₀**. Consequently, the noise current of I_SS *around 2ω₀* is commutated by the switching pair and folded down to sidebands near ω₀. This folded 2ω₀ noise is typically the dominant tail‑current contribution to phase noise. (Noise of I_SS near DC only produces AM, which an ideal symmetric oscillator does not convert to PM.)\n\n**2. What C_T does at 2ω₀.** Adding C_T lowers the impedance seen at node P at 2ω₀:\n\nZ_P(2ω₀) ≈ (1/2ω₀C_T) ∥ (1/2g_m) ∥ R_tail\n\nOnce 1/2ω₀C_T becomes comparable to or smaller than the impedance looking into the sources (≈1/2g_m), most of the 2ω₀ noise current of I_SS is shunted into C_T instead of being steered alternately into the two halves of the tank by M1–M2. The folding term is therefore attenuated, and the 2ω₀ swing (and hence the noise sensitivity/ISF) at node P is also reduced.\n\n**3. What C_T does at ω₀.** For the *differential* signal, node P is a virtual ground at ω₀, so C_T does not load the tank: the oscillation frequency, tank Q, and output swing are essentially unchanged. Hence the improvement comes without the penalty of lowering the signal amplitude.\n\n## Caveats\n\n- The benefit saturates: once 1/2ω₀C_T ≪ 1/2g_m, further capacitance buys nothing, and the low‑offset (AM) noise of I_SS is not filtered at all.\n- A very large C_T clamps the natural 2ω₀ swing at P, forcing M1 and M2 to charge/discharge C_T with large 2ω₀ currents; this distorts the switching waveform, increases the 2ω₀ harmonic in the drain currents, and can degrade swing and phase noise again.\n- This is exactly the rationale behind \"tail filtering\"; in practice the same idea is pushed further with an LC trap tuned to 2ω₀ in the tail branch, which suppresses the 2ω₀ noise without requiring a huge capacitor.\n\n**Bottom line:** C_T shorts the tail node at the dangerous frequency 2ω₀ while leaving the tank untouched at ω₀, so the folded tail‑current noise is suppressed and the phase noise improves.",
        "format": "markdown",
        "sha256": "2806fdf2984b087f5a54d51ff2df7e93be6d8751783e58f5d39d7652f8ddebdf"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 2,
          "is_full_credit": false,
          "rationale": "It acknowledges that excessive C_T can reverse the improvement, but explains the tradeoff only generically. It misses the class-C peak-current improvement and Razavi’s specific degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2575,
        "output_tokens": 14746,
        "total_tokens": 17321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14109,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 2048,
        "input_tokens": 2575,
        "output_tokens": 14746,
        "total_tokens": 17321,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 14109,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 2,
        "score_percent": 50,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-019-add-ct-tail-node-as-phase-noise",
      "part": "part2",
      "question_number": 19,
      "question": "We add CT to the tail node, as in the figure. What happens to the phase noise?",
      "figures": [
        "tasks/part2-019-add-ct-tail-node-as-phase-noise/figure-16.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "**Short answer: the phase noise improves (goes down) – C_T suppresses the noise contributed by the tail current source.**\n\n**Why:**\n\n- In a cross‑coupled oscillator the tail current is not benign. Because M₁ and M₂ switch on and off alternately, the tail node P is a *common‑mode* node whose sensitivity waveform contains strong components at 2ω₀ (and even harmonics). Consequently, noise current of I_SS sitting around 2ω₀ (and around ω₀) is mixed down to frequencies near the carrier and appears as phase noise; the low‑frequency tail noise also modulates the bias current (AM→PM).\n\n- Connecting C_T from the tail node to ground places a low impedance, 1/(C_T s), at node P at these frequencies. The noise current generated by I_SS is now shunted through C_T instead of being pushed through the switching pair into the tank, and the noise voltage (and the 2ω₀ ripple) at P is held down. If C_T is chosen so that 1/(2ω₀C_T) ≪ the impedance looking into the sources (≈1/gm of the pair), the tail‑noise injection is largely shorted out.\n\n- Importantly, this is \"free\" with respect to the oscillation itself: node P is a virtual ground for the *differential* signal (it only contains even harmonics), so C_T does not load the tank, does not change ω₀ or the swing, and does not reduce the tuning range. It only quiets the common‑mode/tail node.\n\n**Net effect:** the tail‑current‑source contribution (thermal noise folded from 2ω₀, and part of the up/down‑converted noise) is attenuated, so the overall phase noise decreases, particularly in the offset range where the tail device was a dominant noise source. The floor set by the tank loss and the cross‑coupled pair themselves is unchanged.\n\n**Caveats:** C_T must be large enough to look like a short at 2ω₀ (otherwise little is gained), it does not remove the low‑frequency (flicker) AM→PM conversion of I_SS since its impedance there is huge, and it costs area and can slow the bias settling at start‑up. But within normal design limits, adding C_T to the tail node reduces the phase noise.",
        "format": "markdown",
        "sha256": "9811879d93622e29d8134a9fbf4eba2eab1203ddbcb73fd0ec899d7245720fa2"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 1,
          "is_full_credit": false,
          "rationale": "The answer claims a monotonic phase-noise improvement from shunting tail noise, missing the nonmonotonic effect and the class-C improvement and possible degradation mechanisms.",
          "golden_solution_sha256": "30f6431c053d0ebf26268170667295ea7bd412e72a78ea0b3247e5803cbdfc8a",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2575,
        "output_tokens": 10985,
        "total_tokens": 13560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 2575,
        "output_tokens": 10985,
        "total_tokens": 13560,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10482,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 1,
        "score_percent": 25,
        "is_full_credit": false
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 1,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the circuit\n\nEach half (X₁/Y₁ and X₂/Y₂) is a cross‑coupled LC oscillator: the pair biased by I_SS gives the negative resistance that cancels the tank loss, and the inductors L together with the total capacitance C at nodes X, Y (device parasitics, wiring) form the tank, ω₀ = 1/√(LC). The pair biased by I₁ in each half is a coupling (gm) stage driven by the *other* half's outputs, with the connections crossed. So the two oscillators are locked in quadrature – this is the classic parallel‑coupled quadrature LC oscillator.\n\n## Phase condition\n\nIn quadrature operation the coupling current I₁·(switching function) injected into a tank is 90° out of phase with the main current from the I_SS pair. The total tank current is therefore tilted by\n\ntan θ = I₁/I_SS\n\nand the tank impedance must supply the opposite phase shift, θ ≈ 2Q·Δω/ω₀, to keep the loop phase at zero. Hence\n\nΔω/ω₀ = ± (1/2Q)(I₁/I_SS)\n\n## Result\n\nf_osc = (1/2π√(LC)) · [ 1 ± (1/2Q)(I₁/I_SS) ]\n\ni.e. the circuit oscillates at (or very near) the tank resonance,\n\n**f_osc ≈ 1/(2π√(LC))**,\n\npulled by only ±(I₁/I_SS)/(2Q) of f₀ (two possible quadrature modes, one above and one below resonance). For example, with I₁ ≈ I_SS and Q = 10 the deviation is only ≈ ±5 %, so to a good estimate the oscillation frequency is simply the resonant frequency of the LC tanks, 1/(2π√(LC)), where C is the total capacitance seen at nodes X₁, Y₁ (X₂, Y₂).",
        "format": "markdown",
        "sha256": "137286ab99776670b5980c5d0959818800f7a890dfd1803be1dca97da2eb6c59"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift proportional to (I₁/I_SS)ω₀/(2Q), including the two possible signs. This matches the required estimate; the minor phase-approximation details do not affect the result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 9673,
        "total_tokens": 11196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9247,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 9673,
        "total_tokens": 11196,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 9247,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 2,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the circuit\n\nThe figure shows two identical LC oscillators (each a cross‑coupled pair loaded by inductors, biased by $I_{SS}$) that are coupled to each other through a second differential pair (biased by $I_1$) whose gates are driven by the other core's outputs ($X_2,Y_2$ drive the top core; $X_1,Y_1$ drive the bottom core, with one side crossed). This is the classic **parallel‑coupled quadrature LC oscillator**: the coupling forces the two cores to run 90° apart ($X$ and $Y$ in quadrature).\n\n## Frequency estimate\n\nEach node's tank is $L$ in parallel with the total node capacitance $C$ (device + inductor parasitics), so\n\n$$\\omega_0 = \\frac{1}{\\sqrt{LC}}$$\n\nBecause the coupling pair switches with the *other* core's waveform, its injected current (fundamental amplitude $\\propto I_1$) is in **quadrature** with the in‑phase current of the cross‑coupled pair ($\\propto I_{SS}$). The tank must therefore supply a phase shift $\\phi = \\tan^{-1}(I_1/I_{SS})$, and since near resonance $d\\phi/d\\omega \\approx -2Q/\\omega_0$:\n\n$$\\omega_{osc} \\approx \\omega_0 \\left[1 \\pm \\frac{1}{2Q}\\cdot\\frac{I_1}{I_{SS}}\\right]$$\n\n## Result\n\nFor a normal design ($Q \\gg 1$, $I_1 \\lesssim I_{SS}$), the correction term is small, so the oscillation frequency is essentially the tank resonance:\n\n$$\\boxed{f_{osc} \\approx \\frac{1}{2\\pi\\sqrt{LC}}}$$\n\n(with a slight offset of $\\pm \\frac{f_0}{2Q}\\frac{I_1}{I_{SS}}$ set by the quadrature coupling; $C$ is the total capacitance seen at each of the nodes $X_1, Y_1, X_2, Y_2$).",
        "format": "markdown",
        "sha256": "17fc13420170c003317f2539dde9e815070fb9c90172df1bd8f42db91a30abbd"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Correctly gives the tank resonance and the coupling-induced shift \u0003\tomega_0(I_1/I_{SS})/(2Q), matching the large-signal estimate. The sign and minor phase-derivation details do not affect the result.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1523,
        "output_tokens": 11160,
        "total_tokens": 12683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 1024,
        "input_tokens": 1523,
        "output_tokens": 11160,
        "total_tokens": 12683,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10685,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    },
    {
      "question_id": "part2-020-estimate-oscillation-frequency",
      "part": "part2",
      "question_number": 20,
      "question": "Estimate the oscillation frequency of the circuit in the figure.",
      "figures": [
        "tasks/part2-020-estimate-oscillation-frequency/figure-17.png"
      ],
      "rollout": 3,
      "configuration": {
        "model_id": null,
        "thinking_effort": "xhigh",
        "api_model": "qwen/qwen3.8-max-0902",
        "route": "openrouter_chat_completions"
      },
      "answer": {
        "text": "## Identifying the circuit\n\nThe figure shows two identical cross‑coupled LC oscillators (each pair of inductors forms a tank with the parasitic capacitance at nodes X₁,Y₁ and X₂,Y₂; the I_SS pairs supply the negative resistance). The extra transistor pairs (tailed by I₁) are *coupling* devices: the outputs of one stage drive the gates of the other, with one stage coupled straight and the other cross‑coupled. This is the classic **parallel‑coupled quadrature LC oscillator**: the two stages lock 90° apart.\n\n## Setting up the oscillation condition\n\nIn each tank, the current from the cross‑coupled pair (∝ I_SS) is in phase with the tank voltage (it cancels R_p), while the injected coupling current (∝ I₁) is in quadrature (because of the 90° phase relationship). The tank must therefore operate off resonance to provide the compensating phase shift:\n\ntan θ = I₁/I_SS\n\nNear resonance the tank phase slope gives θ ≈ 2Q·Δω/ω₀, so\n\nΔω/ω₀ = ± (1/2Q)·(I₁/I_SS)\n\n## Result\n\nω_osc = ω₀ [1 ± (1/2Q)(I₁/I_SS)],  ω₀ = 1/√(LC)\n\ni.e.\n\n**f_osc ≈ f₀ = 1/(2π√(LC))**, split into two quadrature modes at f₀[1 ± I₁/(2Q·I_SS)].\n\nSince Q is large and I₁ ≲ I_SS, the deviation is small: to a good estimate the circuit oscillates at (or very near) the resonant frequency of the LC tanks, f_osc ≈ 1/(2π√(LC)), with the coupling merely choosing the quadrature mode and shifting the frequency by only ±(I₁/2Q·I_SS)·f₀.",
        "format": "markdown",
        "sha256": "29fd210382557d438cd02417252bad31125e1cdb0ac3b5795e54e2599cf87e62"
      },
      "model_call_count": 1,
      "internet_or_tool_evidence": false,
      "source_experiment": "2026-11-09-question-only-rerun",
      "scores": {
        "gpt_6_luna_max": {
          "score_0_to_4": 4,
          "is_full_credit": true,
          "rationale": "Gives the tank resonance and the coupling-induced shift Δω/ω₀ ≈ ±(I₁/I_SS)/(2Q), matching the golden solution, and correctly notes the two possible modes above or below resonance.",
          "golden_solution_sha256": "9fb09917ae8858f8003213ac52eae9cc4403612167903aff6685adcc43ddd686",
          "rubric_sha256": "7c95b8e3a1a51fcebb49a1ad05e777ad488f398109bed3af7814ed1709b67a54",
          "judge_model": "openai/gpt-6-luna"
        }
      },
      "tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 11249,
        "total_tokens": 12772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "selected_response_tokens": {
        "cached_input_tokens": 0,
        "input_tokens": 1523,
        "output_tokens": 11249,
        "total_tokens": 12772,
        "cache_creation_input_tokens": null,
        "reasoning_output_tokens": 10828,
        "complete": true,
        "availability": "complete",
        "missing_fields": []
      },
      "attempt_count": 1,
      "active_score": {
        "policy": "gpt_6_luna_max",
        "score_0_to_4": 4,
        "score_percent": 100,
        "is_full_credit": true
      }
    }
  ]
}
